WC1: Exploration Update
Original announcement by asx on
- Company
- West Cobar Metals Limited
- Ticker
- WC1
- Exchange
- ASX
- Region
- Unavailable
- Primary commodity
- Scandium
- Secondary commodities
- Copper, Zinc, Rare earth elements, Titanium dioxide
- Document categories
- Drill results, Other
- Extracted
- 2026-10-12 22:26:26 UTC
Analysis by Minestarters Atlas
Atlas analysis published:
Minestarters Atlas analysis
Summary
West Cobar Metals announced an exploration update, detailing plans for its first dedicated scandium drilling program at the Salazar Critical Minerals Project in Western Australia, set to commence in October 2026. This program will involve closer-spaced drilling to test for higher-grade scandium zones. Separately, the company reported that 15 air core drill holes at the Blind Freddie Prospect in NSW returned no significant assay results for copper or zinc, failing to confirm previous surface anomalies.
Reasoning: West Cobar Metals announced plans for a dedicated scandium drilling program at Salazar, which is a positive step, but this was offset by negative drill results from the Blind Freddie Prospect where no significant mineralization was intersected.
Positive factors
- planned drilling program approved for scandium
- closer spaced drilling planned for Salazar
Negative factors
- no significant assay results from Blind Freddie drilling
- surface anomalies not confirmed by drilling
Low confidence — this extraction should be reviewed alongside the original source.
Facts used in scoring: 31
Classification and evidence
No Significant Resultsnegative · Story-specific tag
No canonical definition is currently available.
Why it applies: Drilling at Blind Freddie Prospect returned no significant assay results for copper or zinc.
Evidence · text
“Blind Freddie air core drilling completed (NSW): 15 holes for 801m returned with no significant assay results”
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: The release includes QA/QC disclosure, mentioning ALS as the laboratory and the insertion of CRM, blank, and duplicate samples.
Evidence · text
“AC samples analysed at ALS by method Au-ICP21 and in addition, selected samples by ME-MS61 (4 acid digest and 48 elements). CRM, blank and duplicate were inserted at regular intervals in the sample stream.”
JORC Compliantpositive · Story-specific tag
Resource estimate prepared in compliance with JORC Code (Australia) — high reporting standard.
Why it applies: The exploration results are reported in compliance with the JORC Code, 2012 Edition, and signed off by a Competent Person.
Evidence · text
“Mr Pascoe consents to the inclusion in this announcement of the matters based on his information in the form and context in which it appears. Appendix 1: JORC Code, 2012 Edition – Table 1”
QP/CP Signedpositive · Story-specific tag
Qualified Person (QP) or Competent Person (CP) named and signed off — a member of a recognized professional association (e.g., AusIMM, SME, AIG, P.Geo) with relevant experience.
Why it applies: Mr David Pascoe, Head of Technical and Exploration, is named as the Competent Person responsible for the exploration information.
Evidence · text
“Mr David Pascoe, who is Head of Technical and Exploration of West Cobar Metals Limited and a Member of the Australian Institute of Geoscientists. Mr Pascoe has sufficient experience which is relevant to the style of mineralisation and type of deposit under consideration and to the activity which he is undertaking to qualify as a Competent Person as defined in the 2012 Edition of the ‘Australasian Code for Reporting of Exploration Results, Mineral Resources and Ore Reserves’.”
Extracted facts
Stored fact records: 31. Some facts used in scoring do not have a stored record.
Drill Results (31)
BFA01Blind Freddie · copperIntercept: 56 mView all detailsHide details
Identity
- Hole ID
- BFA01
- Project
- Blind Freddie
- Commodity
- copper
- Region
- australia_nsw
- Reported Region
- australia_nsw
- Ticker
- WC1
Geometry
- Intercept
- 56 m
- From
- 0 m
- To
- 56 m
- Hole Depth
- 56 m
- Intercept Depth
- 0 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- BFA01:0-56
- Mining Method
- unknown
Location
- Easting
- 337226
- Northing
- 6513248
- CRS
- GDA94 Zone 55 South
- EPSG
- 28355
- Elevation
- 194 m
- Azimuth
- 0 °
- Dip
- -90 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-10-12T00:00:00.000Z
Reasoning: Drilling at Blind Freddie Prospect returned no significant assay results for copper, failing to confirm previous surface anomalies.
Negative factors
- no significant mineralization intersected
- surface anomalies not confirmed by drilling
Evidence · table
“BFA01”
Context: 56
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
BFA01Blind Freddie · zincIntercept: 56 mView all detailsHide details
Identity
- Hole ID
- BFA01
- Project
- Blind Freddie
- Commodity
- zinc
- Region
- australia_nsw
- Reported Region
- australia_nsw
- Ticker
- WC1
Geometry
- Intercept
- 56 m
- From
- 0 m
- To
- 56 m
- Hole Depth
- 56 m
- Intercept Depth
- 0 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- BFA01:0-56
- Mining Method
- unknown
Location
- Easting
- 337226
- Northing
- 6513248
- CRS
- GDA94 Zone 55 South
- EPSG
- 28355
- Elevation
- 194 m
- Azimuth
- 0 °
- Dip
- -90 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-10-12T00:00:00.000Z
Reasoning: Drilling at Blind Freddie Prospect returned no significant assay results for zinc, failing to confirm previous surface anomalies.
Negative factors
- no significant mineralization intersected
- surface anomalies not confirmed by drilling
Evidence · table
“BFA01”
Context: 56
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
BFA02Blind Freddie · copperIntercept: 54 mView all detailsHide details
Identity
- Hole ID
- BFA02
- Project
- Blind Freddie
- Commodity
- copper
- Region
- australia_nsw
- Reported Region
- australia_nsw
- Ticker
- WC1
Geometry
- Intercept
- 54 m
- From
- 0 m
- To
- 54 m
- Hole Depth
- 54 m
- Intercept Depth
- 0 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- BFA02:0-54
- Mining Method
- unknown
Location
- Easting
- 337199
- Northing
- 6513249
- CRS
- GDA94 Zone 55 South
- EPSG
- 28355
- Elevation
- 194 m
- Azimuth
- 0 °
- Dip
- -90 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-10-12T00:00:00.000Z
Reasoning: Drilling at Blind Freddie Prospect returned no significant assay results for copper, failing to confirm previous surface anomalies.
Negative factors
- no significant mineralization intersected
- surface anomalies not confirmed by drilling
Evidence · table
“BFA02”
Context: 54
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
BFA02Blind Freddie · zincIntercept: 54 mView all detailsHide details
Identity
- Hole ID
- BFA02
- Project
- Blind Freddie
- Commodity
- zinc
- Region
- australia_nsw
- Reported Region
- australia_nsw
- Ticker
- WC1
Geometry
- Intercept
- 54 m
- From
- 0 m
- To
- 54 m
- Hole Depth
- 54 m
- Intercept Depth
- 0 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- BFA02:0-54
- Mining Method
- unknown
Location
- Easting
- 337199
- Northing
- 6513249
- CRS
- GDA94 Zone 55 South
- EPSG
- 28355
- Elevation
- 194 m
- Azimuth
- 0 °
- Dip
- -90 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-10-12T00:00:00.000Z
Reasoning: Drilling at Blind Freddie Prospect returned no significant assay results for zinc, failing to confirm previous surface anomalies.
Negative factors
- no significant mineralization intersected
- surface anomalies not confirmed by drilling
Evidence · table
“BFA02”
Context: 54
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
BFA03Blind Freddie · copperIntercept: 36 mView all detailsHide details
Identity
- Hole ID
- BFA03
- Project
- Blind Freddie
- Commodity
- copper
- Region
- australia_nsw
- Reported Region
- australia_nsw
- Ticker
- WC1
Geometry
- Intercept
- 36 m
- From
- 0 m
- To
- 36 m
- Hole Depth
- 36 m
- Intercept Depth
- 0 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- BFA03:0-36
- Mining Method
- unknown
Location
- Easting
- 337144
- Northing
- 6513252
- CRS
- GDA94 Zone 55 South
- EPSG
- 28355
- Elevation
- 194 m
- Azimuth
- 0 °
- Dip
- -90 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-10-12T00:00:00.000Z
Reasoning: Drilling at Blind Freddie Prospect returned no significant assay results for copper, failing to confirm previous surface anomalies.
Negative factors
- no significant mineralization intersected
- surface anomalies not confirmed by drilling
Evidence · table
“BFA03”
Context: 36
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
BFA03Blind Freddie · zincIntercept: 36 mView all detailsHide details
Identity
- Hole ID
- BFA03
- Project
- Blind Freddie
- Commodity
- zinc
- Region
- australia_nsw
- Reported Region
- australia_nsw
- Ticker
- WC1
Geometry
- Intercept
- 36 m
- From
- 0 m
- To
- 36 m
- Hole Depth
- 36 m
- Intercept Depth
- 0 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- BFA03:0-36
- Mining Method
- unknown
Location
- Easting
- 337144
- Northing
- 6513252
- CRS
- GDA94 Zone 55 South
- EPSG
- 28355
- Elevation
- 194 m
- Azimuth
- 0 °
- Dip
- -90 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-10-12T00:00:00.000Z
Reasoning: Drilling at Blind Freddie Prospect returned no significant assay results for zinc, failing to confirm previous surface anomalies.
Negative factors
- no significant mineralization intersected
- surface anomalies not confirmed by drilling
Evidence · table
“BFA03”
Context: 36
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
BFA04Blind Freddie · copperIntercept: 66 mView all detailsHide details
Identity
- Hole ID
- BFA04
- Project
- Blind Freddie
- Commodity
- copper
- Region
- australia_nsw
- Reported Region
- australia_nsw
- Ticker
- WC1
Geometry
- Intercept
- 66 m
- From
- 0 m
- To
- 66 m
- Hole Depth
- 66 m
- Intercept Depth
- 0 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- BFA04:0-66
- Mining Method
- unknown
Location
- Easting
- 337348
- Northing
- 6513250
- CRS
- GDA94 Zone 55 South
- EPSG
- 28355
- Elevation
- 194 m
- Azimuth
- 0 °
- Dip
- -90 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-10-12T00:00:00.000Z
Reasoning: Drilling at Blind Freddie Prospect returned no significant assay results for copper, failing to confirm previous surface anomalies.
Negative factors
- no significant mineralization intersected
- surface anomalies not confirmed by drilling
Evidence · table
“BFA04”
Context: 66
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
BFA04Blind Freddie · zincIntercept: 66 mView all detailsHide details
Identity
- Hole ID
- BFA04
- Project
- Blind Freddie
- Commodity
- zinc
- Region
- australia_nsw
- Reported Region
- australia_nsw
- Ticker
- WC1
Geometry
- Intercept
- 66 m
- From
- 0 m
- To
- 66 m
- Hole Depth
- 66 m
- Intercept Depth
- 0 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- BFA04:0-66
- Mining Method
- unknown
Location
- Easting
- 337348
- Northing
- 6513250
- CRS
- GDA94 Zone 55 South
- EPSG
- 28355
- Elevation
- 194 m
- Azimuth
- 0 °
- Dip
- -90 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-10-12T00:00:00.000Z
Reasoning: Drilling at Blind Freddie Prospect returned no significant assay results for zinc, failing to confirm previous surface anomalies.
Negative factors
- no significant mineralization intersected
- surface anomalies not confirmed by drilling
Evidence · table
“BFA04”
Context: 66
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
BFA05Blind Freddie · copperIntercept: 42 mView all detailsHide details
Identity
- Hole ID
- BFA05
- Project
- Blind Freddie
- Commodity
- copper
- Region
- australia_nsw
- Reported Region
- australia_nsw
- Ticker
- WC1
Geometry
- Intercept
- 42 m
- From
- 0 m
- To
- 42 m
- Hole Depth
- 42 m
- Intercept Depth
- 0 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- BFA05:0-42
- Mining Method
- unknown
Location
- Easting
- 337298
- Northing
- 6513249
- CRS
- GDA94 Zone 55 South
- EPSG
- 28355
- Elevation
- 194 m
- Azimuth
- 0 °
- Dip
- -90 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-10-12T00:00:00.000Z
Reasoning: Drilling at Blind Freddie Prospect returned no significant assay results for copper, failing to confirm previous surface anomalies.
Negative factors
- no significant mineralization intersected
- surface anomalies not confirmed by drilling
Evidence · table
“BFA05”
Context: 42
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
BFA05Blind Freddie · zincIntercept: 42 mView all detailsHide details
Identity
- Hole ID
- BFA05
- Project
- Blind Freddie
- Commodity
- zinc
- Region
- australia_nsw
- Reported Region
- australia_nsw
- Ticker
- WC1
Geometry
- Intercept
- 42 m
- From
- 0 m
- To
- 42 m
- Hole Depth
- 42 m
- Intercept Depth
- 0 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- BFA05:0-42
- Mining Method
- unknown
Location
- Easting
- 337298
- Northing
- 6513249
- CRS
- GDA94 Zone 55 South
- EPSG
- 28355
- Elevation
- 194 m
- Azimuth
- 0 °
- Dip
- -90 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-10-12T00:00:00.000Z
Reasoning: Drilling at Blind Freddie Prospect returned no significant assay results for zinc, failing to confirm previous surface anomalies.
Negative factors
- no significant mineralization intersected
- surface anomalies not confirmed by drilling
Evidence · table
“BFA05”
Context: 42
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
BFA06Blind Freddie · copperIntercept: 42 mView all detailsHide details
Identity
- Hole ID
- BFA06
- Project
- Blind Freddie
- Commodity
- copper
- Region
- australia_nsw
- Reported Region
- australia_nsw
- Ticker
- WC1
Geometry
- Intercept
- 42 m
- From
- 0 m
- To
- 42 m
- Hole Depth
- 42 m
- Intercept Depth
- 0 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- BFA06:0-42
- Mining Method
- unknown
Location
- Easting
- 337252
- Northing
- 6513252
- CRS
- GDA94 Zone 55 South
- EPSG
- 28355
- Elevation
- 194 m
- Azimuth
- 0 °
- Dip
- -90 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-10-12T00:00:00.000Z
Reasoning: Drilling at Blind Freddie Prospect returned no significant assay results for copper, failing to confirm previous surface anomalies.
Negative factors
- no significant mineralization intersected
- surface anomalies not confirmed by drilling
Evidence · table
“BFA06”
Context: 42
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
BFA06Blind Freddie · zincIntercept: 42 mView all detailsHide details
Identity
- Hole ID
- BFA06
- Project
- Blind Freddie
- Commodity
- zinc
- Region
- australia_nsw
- Reported Region
- australia_nsw
- Ticker
- WC1
Geometry
- Intercept
- 42 m
- From
- 0 m
- To
- 42 m
- Hole Depth
- 42 m
- Intercept Depth
- 0 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- BFA06:0-42
- Mining Method
- unknown
Location
- Easting
- 337252
- Northing
- 6513252
- CRS
- GDA94 Zone 55 South
- EPSG
- 28355
- Elevation
- 194 m
- Azimuth
- 0 °
- Dip
- -90 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-10-12T00:00:00.000Z
Reasoning: Drilling at Blind Freddie Prospect returned no significant assay results for zinc, failing to confirm previous surface anomalies.
Negative factors
- no significant mineralization intersected
- surface anomalies not confirmed by drilling
Evidence · table
“BFA06”
Context: 42
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
BFA07Blind Freddie · copperIntercept: 42 mView all detailsHide details
Identity
- Hole ID
- BFA07
- Project
- Blind Freddie
- Commodity
- copper
- Region
- australia_nsw
- Reported Region
- australia_nsw
- Ticker
- WC1
Geometry
- Intercept
- 42 m
- From
- 0 m
- To
- 42 m
- Hole Depth
- 42 m
- Intercept Depth
- 0 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- BFA07:0-42
- Mining Method
- unknown
Location
- Easting
- 337400
- Northing
- 6513100
- CRS
- GDA94 Zone 55 South
- EPSG
- 28355
- Elevation
- 194 m
- Azimuth
- 0 °
- Dip
- -90 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-10-12T00:00:00.000Z
Reasoning: Drilling at Blind Freddie Prospect returned no significant assay results for copper, failing to confirm previous surface anomalies.
Negative factors
- no significant mineralization intersected
- surface anomalies not confirmed by drilling
Evidence · table
“BFA07”
Context: 42
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
BFA07Blind Freddie · zincIntercept: 42 mView all detailsHide details
Identity
- Hole ID
- BFA07
- Project
- Blind Freddie
- Commodity
- zinc
- Region
- australia_nsw
- Reported Region
- australia_nsw
- Ticker
- WC1
Geometry
- Intercept
- 42 m
- From
- 0 m
- To
- 42 m
- Hole Depth
- 42 m
- Intercept Depth
- 0 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- BFA07:0-42
- Mining Method
- unknown
Location
- Easting
- 337400
- Northing
- 6513100
- CRS
- GDA94 Zone 55 South
- EPSG
- 28355
- Elevation
- 194 m
- Azimuth
- 0 °
- Dip
- -90 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-10-12T00:00:00.000Z
Reasoning: Drilling at Blind Freddie Prospect returned no significant assay results for zinc, failing to confirm previous surface anomalies.
Negative factors
- no significant mineralization intersected
- surface anomalies not confirmed by drilling
Evidence · table
“BFA07”
Context: 42
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
BFA08Blind Freddie · copperIntercept: 41 mView all detailsHide details
Identity
- Hole ID
- BFA08
- Project
- Blind Freddie
- Commodity
- copper
- Region
- australia_nsw
- Reported Region
- australia_nsw
- Ticker
- WC1
Geometry
- Intercept
- 41 m
- From
- 0 m
- To
- 41 m
- Hole Depth
- 41 m
- Intercept Depth
- 0 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- BFA08:0-41
- Mining Method
- unknown
Location
- Easting
- 337294
- Northing
- 6513098
- CRS
- GDA94 Zone 55 South
- EPSG
- 28355
- Elevation
- 194 m
- Azimuth
- 0 °
- Dip
- -90 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-10-12T00:00:00.000Z
Reasoning: Drilling at Blind Freddie Prospect returned no significant assay results for copper, failing to confirm previous surface anomalies.
Negative factors
- no significant mineralization intersected
- surface anomalies not confirmed by drilling
Evidence · table
“BFA08”
Context: 41
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
BFA08Blind Freddie · zincIntercept: 41 mView all detailsHide details
Identity
- Hole ID
- BFA08
- Project
- Blind Freddie
- Commodity
- zinc
- Region
- australia_nsw
- Reported Region
- australia_nsw
- Ticker
- WC1
Geometry
- Intercept
- 41 m
- From
- 0 m
- To
- 41 m
- Hole Depth
- 41 m
- Intercept Depth
- 0 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- BFA08:0-41
- Mining Method
- unknown
Location
- Easting
- 337294
- Northing
- 6513098
- CRS
- GDA94 Zone 55 South
- EPSG
- 28355
- Elevation
- 194 m
- Azimuth
- 0 °
- Dip
- -90 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-10-12T00:00:00.000Z
Reasoning: Drilling at Blind Freddie Prospect returned no significant assay results for zinc, failing to confirm previous surface anomalies.
Negative factors
- no significant mineralization intersected
- surface anomalies not confirmed by drilling
Evidence · table
“BFA08”
Context: 41
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
BFA09Blind Freddie · copperIntercept: 71 mView all detailsHide details
Identity
- Hole ID
- BFA09
- Project
- Blind Freddie
- Commodity
- copper
- Region
- australia_nsw
- Reported Region
- australia_nsw
- Ticker
- WC1
Geometry
- Intercept
- 71 m
- From
- 0 m
- To
- 71 m
- Hole Depth
- 71 m
- Intercept Depth
- 0 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- BFA09:0-71
- Mining Method
- unknown
Location
- Easting
- 337197
- Northing
- 6513383
- CRS
- GDA94 Zone 55 South
- EPSG
- 28355
- Elevation
- 194 m
- Azimuth
- 0 °
- Dip
- -90 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-10-12T00:00:00.000Z
Reasoning: Drilling at Blind Freddie Prospect returned no significant assay results for copper, failing to confirm previous surface anomalies.
Negative factors
- no significant mineralization intersected
- surface anomalies not confirmed by drilling
Evidence · table
“BFA09”
Context: 71
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
BFA09Blind Freddie · zincIntercept: 71 mView all detailsHide details
Identity
- Hole ID
- BFA09
- Project
- Blind Freddie
- Commodity
- zinc
- Region
- australia_nsw
- Reported Region
- australia_nsw
- Ticker
- WC1
Geometry
- Intercept
- 71 m
- From
- 0 m
- To
- 71 m
- Hole Depth
- 71 m
- Intercept Depth
- 0 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- BFA09:0-71
- Mining Method
- unknown
Location
- Easting
- 337197
- Northing
- 6513383
- CRS
- GDA94 Zone 55 South
- EPSG
- 28355
- Elevation
- 194 m
- Azimuth
- 0 °
- Dip
- -90 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-10-12T00:00:00.000Z
Reasoning: Drilling at Blind Freddie Prospect returned no significant assay results for zinc, failing to confirm previous surface anomalies.
Negative factors
- no significant mineralization intersected
- surface anomalies not confirmed by drilling
Evidence · table
“BFA09”
Context: 71
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
BFA10Blind Freddie · copperIntercept: 65 mView all detailsHide details
Identity
- Hole ID
- BFA10
- Project
- Blind Freddie
- Commodity
- copper
- Region
- australia_nsw
- Reported Region
- australia_nsw
- Ticker
- WC1
Geometry
- Intercept
- 65 m
- From
- 0 m
- To
- 65 m
- Hole Depth
- 65 m
- Intercept Depth
- 0 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- BFA10:0-65
- Mining Method
- unknown
Location
- Easting
- 337109
- Northing
- 6513350
- CRS
- GDA94 Zone 55 South
- EPSG
- 28355
- Elevation
- 194 m
- Azimuth
- 0 °
- Dip
- -90 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-10-12T00:00:00.000Z
Reasoning: Drilling at Blind Freddie Prospect returned no significant assay results for copper, failing to confirm previous surface anomalies.
Negative factors
- no significant mineralization intersected
- surface anomalies not confirmed by drilling
Evidence · table
“BFA10”
Context: 65
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
BFA10Blind Freddie · zincIntercept: 65 mView all detailsHide details
Identity
- Hole ID
- BFA10
- Project
- Blind Freddie
- Commodity
- zinc
- Region
- australia_nsw
- Reported Region
- australia_nsw
- Ticker
- WC1
Geometry
- Intercept
- 65 m
- From
- 0 m
- To
- 65 m
- Hole Depth
- 65 m
- Intercept Depth
- 0 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- BFA10:0-65
- Mining Method
- unknown
Location
- Easting
- 337109
- Northing
- 6513350
- CRS
- GDA94 Zone 55 South
- EPSG
- 28355
- Elevation
- 194 m
- Azimuth
- 0 °
- Dip
- -90 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-10-12T00:00:00.000Z
Reasoning: Drilling at Blind Freddie Prospect returned no significant assay results for zinc, failing to confirm previous surface anomalies.
Negative factors
- no significant mineralization intersected
- surface anomalies not confirmed by drilling
Evidence · table
“BFA10”
Context: 65
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
BFA11Blind Freddie · copperIntercept: 68 mView all detailsHide details
Identity
- Hole ID
- BFA11
- Project
- Blind Freddie
- Commodity
- copper
- Region
- australia_nsw
- Reported Region
- australia_nsw
- Ticker
- WC1
Geometry
- Intercept
- 68 m
- From
- 0 m
- To
- 68 m
- Hole Depth
- 68 m
- Intercept Depth
- 0 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- BFA11:0-68
- Mining Method
- unknown
Location
- Easting
- 337628
- Northing
- 6513223
- CRS
- GDA94 Zone 55 South
- EPSG
- 28355
- Elevation
- 194 m
- Azimuth
- 0 °
- Dip
- -90 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-10-12T00:00:00.000Z
Reasoning: Drilling at Blind Freddie Prospect returned no significant assay results for copper, failing to confirm previous surface anomalies.
Negative factors
- no significant mineralization intersected
- surface anomalies not confirmed by drilling
Evidence · table
“BFA11”
Context: 68
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
BFA11Blind Freddie · zincIntercept: 68 mView all detailsHide details
Identity
- Hole ID
- BFA11
- Project
- Blind Freddie
- Commodity
- zinc
- Region
- australia_nsw
- Reported Region
- australia_nsw
- Ticker
- WC1
Geometry
- Intercept
- 68 m
- From
- 0 m
- To
- 68 m
- Hole Depth
- 68 m
- Intercept Depth
- 0 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- BFA11:0-68
- Mining Method
- unknown
Location
- Easting
- 337628
- Northing
- 6513223
- CRS
- GDA94 Zone 55 South
- EPSG
- 28355
- Elevation
- 194 m
- Azimuth
- 0 °
- Dip
- -90 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-10-12T00:00:00.000Z
Reasoning: Drilling at Blind Freddie Prospect returned no significant assay results for zinc, failing to confirm previous surface anomalies.
Negative factors
- no significant mineralization intersected
- surface anomalies not confirmed by drilling
Evidence · table
“BFA11”
Context: 68
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
BFA12Blind Freddie · copperIntercept: 16 mView all detailsHide details
Identity
- Hole ID
- BFA12
- Project
- Blind Freddie
- Commodity
- copper
- Region
- australia_nsw
- Reported Region
- australia_nsw
- Ticker
- WC1
Geometry
- Intercept
- 16 m
- From
- 0 m
- To
- 16 m
- Hole Depth
- 16 m
- Intercept Depth
- 0 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- BFA12:0-16
- Mining Method
- unknown
Location
- Easting
- 337879
- Northing
- 6513227
- CRS
- GDA94 Zone 55 South
- EPSG
- 28355
- Elevation
- 194 m
- Azimuth
- 0 °
- Dip
- -90 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-10-12T00:00:00.000Z
Reasoning: Drilling at Blind Freddie Prospect returned no significant assay results for copper, failing to confirm previous surface anomalies.
Negative factors
- no significant mineralization intersected
- surface anomalies not confirmed by drilling
Evidence · table
“BFA12”
Context: 16
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
BFA12Blind Freddie · zincIntercept: 16 mView all detailsHide details
Identity
- Hole ID
- BFA12
- Project
- Blind Freddie
- Commodity
- zinc
- Region
- australia_nsw
- Reported Region
- australia_nsw
- Ticker
- WC1
Geometry
- Intercept
- 16 m
- From
- 0 m
- To
- 16 m
- Hole Depth
- 16 m
- Intercept Depth
- 0 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- BFA12:0-16
- Mining Method
- unknown
Location
- Easting
- 337879
- Northing
- 6513227
- CRS
- GDA94 Zone 55 South
- EPSG
- 28355
- Elevation
- 194 m
- Azimuth
- 0 °
- Dip
- -90 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-10-12T00:00:00.000Z
Reasoning: Drilling at Blind Freddie Prospect returned no significant assay results for zinc, failing to confirm previous surface anomalies.
Negative factors
- no significant mineralization intersected
- surface anomalies not confirmed by drilling
Evidence · table
“BFA12”
Context: 16
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
BFA13Blind Freddie · copperIntercept: 78 mView all detailsHide details
Identity
- Hole ID
- BFA13
- Project
- Blind Freddie
- Commodity
- copper
- Region
- australia_nsw
- Reported Region
- australia_nsw
- Ticker
- WC1
Geometry
- Intercept
- 78 m
- From
- 0 m
- To
- 78 m
- Hole Depth
- 78 m
- Intercept Depth
- 0 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- BFA13:0-78
- Mining Method
- unknown
Location
- Easting
- 337845
- Northing
- 6513271
- CRS
- GDA94 Zone 55 South
- EPSG
- 28355
- Elevation
- 194 m
- Azimuth
- 0 °
- Dip
- -90 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-10-12T00:00:00.000Z
Reasoning: Drilling at Blind Freddie Prospect returned no significant assay results for copper, failing to confirm previous surface anomalies.
Negative factors
- no significant mineralization intersected
- surface anomalies not confirmed by drilling
Evidence · table
“BFA13”
Context: 78
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
BFA13Blind Freddie · zincIntercept: 78 mView all detailsHide details
Identity
- Hole ID
- BFA13
- Project
- Blind Freddie
- Commodity
- zinc
- Region
- australia_nsw
- Reported Region
- australia_nsw
- Ticker
- WC1
Geometry
- Intercept
- 78 m
- From
- 0 m
- To
- 78 m
- Hole Depth
- 78 m
- Intercept Depth
- 0 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- BFA13:0-78
- Mining Method
- unknown
Location
- Easting
- 337845
- Northing
- 6513271
- CRS
- GDA94 Zone 55 South
- EPSG
- 28355
- Elevation
- 194 m
- Azimuth
- 0 °
- Dip
- -90 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-10-12T00:00:00.000Z
Reasoning: Drilling at Blind Freddie Prospect returned no significant assay results for zinc, failing to confirm previous surface anomalies.
Negative factors
- no significant mineralization intersected
- surface anomalies not confirmed by drilling
Evidence · table
“BFA13”
Context: 78
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
BFA14Blind Freddie · copperIntercept: 54 mView all detailsHide details
Identity
- Hole ID
- BFA14
- Project
- Blind Freddie
- Commodity
- copper
- Region
- australia_nsw
- Reported Region
- australia_nsw
- Ticker
- WC1
Geometry
- Intercept
- 54 m
- From
- 0 m
- To
- 54 m
- Hole Depth
- 54 m
- Intercept Depth
- 0 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- BFA14:0-54
- Mining Method
- unknown
Location
- Easting
- 337621
- Northing
- 6512931
- CRS
- GDA94 Zone 55 South
- EPSG
- 28355
- Elevation
- 194 m
- Azimuth
- 0 °
- Dip
- -90 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-10-12T00:00:00.000Z
Reasoning: Drilling at Blind Freddie Prospect returned no significant assay results for copper, failing to confirm previous surface anomalies.
Negative factors
- no significant mineralization intersected
- surface anomalies not confirmed by drilling
Evidence · table
“BFA14”
Context: 54
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
BFA14Blind Freddie · zincIntercept: 54 mView all detailsHide details
Identity
- Hole ID
- BFA14
- Project
- Blind Freddie
- Commodity
- zinc
- Region
- australia_nsw
- Reported Region
- australia_nsw
- Ticker
- WC1
Geometry
- Intercept
- 54 m
- From
- 0 m
- To
- 54 m
- Hole Depth
- 54 m
- Intercept Depth
- 0 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- BFA14:0-54
- Mining Method
- unknown
Location
- Easting
- 337621
- Northing
- 6512931
- CRS
- GDA94 Zone 55 South
- EPSG
- 28355
- Elevation
- 194 m
- Azimuth
- 0 °
- Dip
- -90 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-10-12T00:00:00.000Z
Reasoning: Drilling at Blind Freddie Prospect returned no significant assay results for zinc, failing to confirm previous surface anomalies.
Negative factors
- no significant mineralization intersected
- surface anomalies not confirmed by drilling
Evidence · table
“BFA14”
Context: 54
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
BFA15Blind Freddie · copperIntercept: 70 mView all detailsHide details
Identity
- Hole ID
- BFA15
- Project
- Blind Freddie
- Commodity
- copper
- Region
- australia_nsw
- Reported Region
- australia_nsw
- Ticker
- WC1
Geometry
- Intercept
- 70 m
- From
- 0 m
- To
- 70 m
- Hole Depth
- 70 m
- Intercept Depth
- 0 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- BFA15:0-70
- Mining Method
- unknown
Location
- Easting
- 337600
- Northing
- 6513500
- CRS
- GDA94 Zone 55 South
- EPSG
- 28355
- Elevation
- 194 m
- Azimuth
- 0 °
- Dip
- -90 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-10-12T00:00:00.000Z
Reasoning: Drilling at Blind Freddie Prospect returned no significant assay results for copper, failing to confirm previous surface anomalies.
Negative factors
- no significant mineralization intersected
- surface anomalies not confirmed by drilling
Evidence · table
“BFA15”
Context: 70
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
BFA15Blind Freddie · zincIntercept: 70 mView all detailsHide details
Identity
- Hole ID
- BFA15
- Project
- Blind Freddie
- Commodity
- zinc
- Region
- australia_nsw
- Reported Region
- australia_nsw
- Ticker
- WC1
Geometry
- Intercept
- 70 m
- From
- 0 m
- To
- 70 m
- Hole Depth
- 70 m
- Intercept Depth
- 0 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- BFA15:0-70
- Mining Method
- unknown
Location
- Easting
- 337600
- Northing
- 6513500
- CRS
- GDA94 Zone 55 South
- EPSG
- 28355
- Elevation
- 194 m
- Azimuth
- 0 °
- Dip
- -90 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-10-12T00:00:00.000Z
Reasoning: Drilling at Blind Freddie Prospect returned no significant assay results for zinc, failing to confirm previous surface anomalies.
Negative factors
- no significant mineralization intersected
- surface anomalies not confirmed by drilling
Evidence · table
“BFA15”
Context: 70
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Fact 31Salazar Critical Minerals Project · scandiumView all detailsHide details
Identity
- Project
- Salazar Critical Minerals Project
- Commodity
- scandium
- Region
- australia_wa
- Reported Region
- Western Australia
- Ticker
- WC1
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-10-12T00:00:00.000Z
Reasoning: The company announced plans for its first dedicated scandium drilling program at Salazar, targeting higher-grade zones with closer-spaced drilling, with all approvals in place.
Positive factors
- drilling program approved
- closer spaced drilling planned
- targeting higher-grade zones
Negative factors
- no assay results yet
Evidence · text
“First dedicated scandium drilling program at Salazar scheduled to commence in the 3rd week of October 2026”
Tags used in scoring
No QA/QC Disclosurenegative
Release does not disclose QA/QC — lab certification, CP/QP sign-off and assay protocols cannot be checked from this document.
Why it applies: qaqc_disclosed is not true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Rejected tags
Rejected tags — excluded from scoring because their label or evidence could not be verified.
Planned DrillingRejected · neutral · Story-specific tag
No canonical definition is currently available.
Reason: The document announces a scheduled drilling program for scandium at Salazar, not completed results.
Evidence · text
“First dedicated scandium drilling program at Salazar scheduled to commence in the 3rd week of October 2026”
How Atlas produces this analysis
Minestarters Atlas uses automated extraction to summarize mining announcements, identify reported measurements, and classify supporting evidence. Sentiment reflects the extracted narrative and classification rules; it is an interpretation, not a reported measurement. Evidence quotes and context are provided where available. Missing data, low-confidence results, and review flags indicate limitations. Check the original publisher announcement before relying on an interpretation.