Viscount Mining Reports Antimony and Tellurium Geochemical Results at Cherry Creek, Nevada - Both Included on the 2025 U.S. Critical Minerals List
Original announcement by newsfile on
- Company
- Viscount Mining Corp.
- Ticker
- VML
- Exchange
- Unavailable
- Region
- Nevada
- Primary commodity
- Antimony
- Secondary commodities
- Tellurium, Gold, Silver, Tungsten, Copper, Bismuth
- Document categories
- Drill results, Other
- Extracted
- 2026-09-10 12:03:47 UTC
Analysis by Minestarters Atlas
Minestarters Atlas analysis
Summary
Viscount Mining has completed a geochemical review of the Cherry Creek Project in Nevada, identifying broad antimony and tellurium anomalies. The review highlights high-grade gold (48.6 g/t) associated with antimony and identifies the Exchequer Fault as a priority target for gold-bismuth-tellurium mineralization.
Reasoning: The release identifies significant geochemical anomalies for two US critical minerals (antimony and tellurium) and highlights a high-grade gold association, providing new exploration targets.
Positive factors
- Identification of critical mineral anomalies (Sb, Te)
- High-grade gold association (48.6 g/t) in antimony corridor
- Strategic importance of antimony and tellurium as US critical minerals
- Broad geochemical footprint across rock, soil, and stream sediments
Negative factors
- Results are based on geochemical review of historical and existing data rather than new drilling
- Rock chip and grab samples are inherently selective and may not be representative
Facts used in scoring: 5
Classification and evidence
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: The release references regional activity at NevGold's Limousine Butte Project as a reference point.
Evidence · text
“NevGold Corp... whose Limousine Butte Project is in White Pine County, Nevada — approximately 10 kilometres to the southwest”
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: The release states that sampling employed industry-standard procedures including blanks, standards, and duplicates.
Evidence · text
“All sampling conducted by the Company employed industry-standard procedures, including the insertion of certified reference materials, blanks, and duplicates.”
Mill Routeneutral
Processing via mill or concentrator (CIL, CIP, tank leach, flotation).
Why it applies: the document describes a mill_cil route ("CIP")
Extracted facts
Stored fact records: 5. Some facts used in scoring do not have a stored record.
Drill Results (5)
Fact 1antimonyGrade: 100Grade Unit: ppmView all detailsHide details
Identity
- Commodity
- antimony
- Ticker
- VML
Geometry
- Grade
- 100
- Grade Unit
- ppm
Classification
- Sample Type
- surface
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-10T00:00:00.000Z
Reasoning: Significant geochemical enrichment in rock samples.
Positive factors
- Consistent with primary stibnite mineralization
Evidence · text
“106 rock samples returning 100 to 10,000 ppm antimony”
Tags used in scoring
No QA/QC Disclosurenegative
Release does not disclose QA/QC — lab certification, CP/QP sign-off and assay protocols cannot be checked from this document.
Why it applies: qaqc_disclosed is not true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Fact 2antimonyGrade: 10000Grade Unit: ppmView all detailsHide details
Identity
- Commodity
- antimony
- Ticker
- VML
Geometry
- Grade
- 10000
- Grade Unit
- ppm
Classification
- Sample Type
- surface
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-10T00:00:00.000Z
Reasoning: Peak antimony value in rock samples.
Positive factors
- High grade consistent with stibnite mineralization
Evidence · text
“100 to 10,000 ppm antimony”
Tags used in scoring
No QA/QC Disclosurenegative
Release does not disclose QA/QC — lab certification, CP/QP sign-off and assay protocols cannot be checked from this document.
Why it applies: qaqc_disclosed is not true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Fact 3goldGrade: 48.6Grade Unit: g/tView all detailsHide details
Identity
- Commodity
- gold
- Ticker
- VML
Geometry
- Grade
- 48.6
- Grade Unit
- g/t
Classification
- Sample Type
- surface
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-10T00:00:00.000Z
Reasoning: Very high gold grade identified in the antimony corridor.
Positive factors
- Exceptional gold grade
Negative factors
- Sample type is rock chip/grab (selective)
Evidence · text
“Gold values in rock samples from the same corridor reach 48.6 grams per tonne (g/t)”
Tags used in scoring
No QA/QC Disclosurenegative
Release does not disclose QA/QC — lab certification, CP/QP sign-off and assay protocols cannot be checked from this document.
Why it applies: qaqc_disclosed is not true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Fact 4telluriumGrade: 56.8Grade Unit: ppmView all detailsHide details
Identity
- Commodity
- tellurium
- Ticker
- VML
Geometry
- Grade
- 56.8
- Grade Unit
- ppm
Classification
- Sample Type
- surface
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-10T00:00:00.000Z
Reasoning: Strong tellurium anomaly identified in rock samples.
Positive factors
- Significant tellurium peak above background
Evidence · text
“13 rock samples exceeding 4 ppm tellurium, with a peak of 56.8 ppm”
Tags used in scoring
No QA/QC Disclosurenegative
Release does not disclose QA/QC — lab certification, CP/QP sign-off and assay protocols cannot be checked from this document.
Why it applies: qaqc_disclosed is not true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Fact 5bismuthGrade: 1710Grade Unit: ppmView all detailsHide details
Identity
- Commodity
- bismuth
- Ticker
- VML
Geometry
- Grade
- 1710
- Grade Unit
- ppm
Classification
- Sample Type
- surface
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-10T00:00:00.000Z
Reasoning: Bismuth enrichment supports the Au-Bi-Te target.
Positive factors
- Elevated bismuth as an indicator element
Evidence · text
“Bismuth, another indicator element, is also elevated along the same corridor, with rock values reaching 1,710 ppm.”
Tags used in scoring
No QA/QC Disclosurenegative
Release does not disclose QA/QC — lab certification, CP/QP sign-off and assay protocols cannot be checked from this document.
Why it applies: qaqc_disclosed is not true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
How Atlas produces this analysis
Minestarters Atlas uses automated extraction to summarize mining announcements, identify reported measurements, and classify supporting evidence. Sentiment reflects the extracted narrative and classification rules; it is an interpretation, not a reported measurement. Evidence quotes and context are provided where available. Missing data, low-confidence results, and review flags indicate limitations. Check the original publisher announcement before relying on an interpretation.