Troilus Expands High-Grade West Rim Discovery with 2.92 g/t AuEQ Over 19 m Outside Current Resource and Within 200 Metres of Reserve Pit
Original announcement by tmx on
- Company
- Troilus Mining Corp.
- Ticker
- TLG
- Exchange
- TSX
- Region
- Quebec, Canada
- Primary commodity
- Gold
- Secondary commodities
- Copper, Silver
- Document categories
- Drill results
- Extracted
- 2026-08-22 14:54:53 UTC
Analysis by Minestarters Atlas
Minestarters Atlas analysis
Summary
Troilus Mining Corp. announced high-grade gold equivalent drill results from its West Rim Zone, including 2.92 g/t AuEq over 19 metres and bonanza grades up to 15.37 g/t AuEq over 2 metres. These results significantly expand the newly discovered zone, which lies entirely outside the current mineral resource estimate but within 200 metres of the planned reserve pit. The company highlights the potential for both open pit and underground development scenarios, with further drilling planned to expand the mineralized footprint.
Reasoning: The announcement reports strong gold equivalent drill results from the West Rim Zone, expanding a recent discovery with high-grade intercepts located close to existing infrastructure and outside the current resource. This indicates significant potential for resource expansion and positive impact on project economics, supported by transparent QA/QC and metal equivalent assumptions.
Positive factors
- High-grade gold equivalent intercepts, including bonanza grades, significantly expand the West Rim discovery.
- Results are entirely outside the current mineral resource estimate but within 200 metres of the planned reserve pit, indicating potential for resource growth and near-term development.
- The drilling extends mineralization along strike and at depth, outperforming previous discovery intercepts and supporting both open pit and underground scenarios.
- True width approximation is disclosed, and robust QA/QC procedures are in place with a Qualified Person sign-off.
Negative factors
- Cut-off grade for compositing is not explicitly stated, which can affect the interpretation of interval grades.
Facts used in scoring: 76
Classification and evidence
Step-Out Extensionpositive
Mineralization extended beyond the previously known limit.
Why it applies: The drilling 'significantly expands and strengthens the original discovery' and 'extends high-grade mineralization north of previous drilling', indicating an extension of known mineralization.
Evidence · text
“The latest drilling significantly expands and strengthens the original discovery”
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: The release details QA/QC procedures including certified lab, standards, blanks, and a Qualified Person sign-off.
Evidence · text
“ALS Laboratory, a certified commercial laboratory, and the other half was retained for results, cross checks, and future reference. A strict QA/QC program was applied to all samples; which included insertion of one certified mineralized standard and one blank sample in each batch of 25 samples. Every sample was processed with standard crushing to 85% passing 75 microns on 500 g splits. Samples were assayed by one-AT (30 g) fire assay with an AA finish and if results were higher than 3.5 g/t Au, assays were redone with a gravimetric finish. For QA/QC samples, a 50 g fire assay was done. In addition to gold, ALS laboratory carried out multi-element analysis for ME-ICP61 analysis of 33 elements four acid ICP-AES. Qualified Person The technical and scientific information in this press release has been reviewed and approved by Nicolas Guest, P.Geo., Exploration Manager, who is a Qualified Person as defined by NI 43-101.”
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: The document states that true thicknesses are approximately 75% to 90% of drilled length.
Evidence · text
“true thicknesses are approximately 75% to 90% of drilled length”
Bonanza Interceptpositive
Exceptionally high-grade zone, well above the deposit-type norm.
Why it applies: Several sub-intervals, such as 15.37 g/t AuEq over 2m and 15.54 g/t AuEq over 2m, exceed the exceptional threshold for gold in a VMS deposit.
Evidence · table
“15.37”
Context: 2
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: The document does not explicitly state the cut-off grade used for compositing the reported intervals.
Evidence · text
“All grades are uncut”
Extracted facts
Stored fact records: 76. Some facts used in scoring do not have a stored record.
Drill Results (76)
WR-26-016goldGrade: 0.27Grade Unit: g/tIntercept: 5 mView all detailsHide details
Identity
- Hole ID
- WR-26-016
- Commodity
- gold
- Ticker
- TLG
Geometry
- Grade
- 0.27
- Grade Unit
- g/t
- Intercept
- 5 m
- From
- 37 m
- To
- 42 m
Classification
- Deposit Type
- vms
- Program
- exploration
- Sample Type
- drill
- Group ID
- WR-26-016:37.0-42.0
- Mining Method
- mixed
QA/QC
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Metal Equivalent
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-05-19T00:00:00.000Z
Reasoning: This intercept is from a new exploration program but shows a low gold grade, indicating it's not a highlight, though it contributes to the overall understanding of the zone.
Positive factors
- New drill intercept from an exploration program expanding a recent discovery.
- True width approximation disclosed.
- Robust QA/QC procedures and QP sign-off.
Negative factors
- Grade is below typical economic thresholds for gold in a VMS deposit.
- Cut-off grade for compositing is not explicitly stated.
Evidence · table
“0.27”
Context: 5
WR-26-016copperGrade: 0.01Grade Unit: %Intercept: 5 mView all detailsHide details
Identity
- Hole ID
- WR-26-016
- Commodity
- copper
- Ticker
- TLG
Geometry
- Grade
- 0.01
- Grade Unit
- %
- Intercept
- 5 m
- From
- 37 m
- To
- 42 m
Classification
- Deposit Type
- vms
- Program
- exploration
- Sample Type
- drill
- Group ID
- WR-26-016:37.0-42.0
- Mining Method
- mixed
QA/QC
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Metal Equivalent
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-05-19T00:00:00.000Z
Reasoning: This intercept shows a very low copper grade, contributing to the polymetallic nature but not as a significant value driver for this specific interval.
Positive factors
- New drill intercept from an exploration program expanding a recent discovery.
- True width approximation disclosed.
- Robust QA/QC procedures and QP sign-off.
Negative factors
- Grade is very low for copper, indicating it's not a primary economic driver for this interval.
- Cut-off grade for compositing is not explicitly stated.
Evidence · table
“0.01”
Context: 5
WR-26-016silverGrade: 0.5Grade Unit: g/tIntercept: 5 mView all detailsHide details
Identity
- Hole ID
- WR-26-016
- Commodity
- silver
- Ticker
- TLG
Geometry
- Grade
- 0.5
- Grade Unit
- g/t
- Intercept
- 5 m
- From
- 37 m
- To
- 42 m
Classification
- Deposit Type
- vms
- Program
- exploration
- Sample Type
- drill
- Group ID
- WR-26-016:37.0-42.0
- Mining Method
- mixed
QA/QC
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Metal Equivalent
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-05-19T00:00:00.000Z
Reasoning: This intercept shows a very low silver grade, contributing to the polymetallic nature but not as a significant value driver for this specific interval.
Positive factors
- New drill intercept from an exploration program expanding a recent discovery.
- True width approximation disclosed.
- Robust QA/QC procedures and QP sign-off.
Negative factors
- Grade is very low for silver, indicating it's not a primary economic driver for this interval.
- Cut-off grade for compositing is not explicitly stated.
Evidence · table
“0.50”
Context: 5
WR-26-016goldGrade: 0.29Grade Unit: g/t AuEqIntercept: 5 mView all detailsHide details
Identity
- Hole ID
- WR-26-016
- Commodity
- gold
- Ticker
- TLG
Geometry
- Grade
- 0.29
- Grade Unit
- g/t AuEq
- Intercept
- 5 m
- From
- 37 m
- To
- 42 m
Classification
- Deposit Type
- vms
- Program
- exploration
- Sample Type
- drill
- Group ID
- WR-26-016:37.0-42.0
- Mining Method
- mixed
QA/QC
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Metal Equivalent
- Metal Eq. Grade
- 0.29
- Metal Eq. Unit
- g/t AuEq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-05-19T00:00:00.000Z
Reasoning: This intercept shows a low gold equivalent grade, indicating it's not a highlight, though it contributes to the overall understanding of the zone. Metal equivalent assumptions are transparently provided.
Positive factors
- New drill intercept from an exploration program expanding a recent discovery.
- True width approximation disclosed.
- Metal equivalent assumptions are disclosed.
- Robust QA/QC procedures and QP sign-off.
Negative factors
- Grade is below typical economic thresholds for gold equivalent in a VMS deposit.
- Cut-off grade for compositing is not explicitly stated.
Evidence · table
“0.29”
Context: 5
WR-26-016goldGrade: 2.83Grade Unit: g/tIntercept: 19 mView all detailsHide details
Identity
- Hole ID
- WR-26-016
- Commodity
- gold
- Ticker
- TLG
Geometry
- Grade
- 2.83
- Grade Unit
- g/t
- Intercept
- 19 m
- From
- 99 m
- To
- 118 m
Classification
- Deposit Type
- vms
- Program
- exploration
- Sample Type
- drill
- Group ID
- WR-26-016:99.0-118.0
- Mining Method
- mixed
QA/QC
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Metal Equivalent
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-05-19T00:00:00.000Z
Reasoning: This intercept shows a strong gold grade over a significant width, contributing materially to the expansion of the West Rim discovery. The GT product (53.77 g/t·m) is moderate to strong.
Positive factors
- Strong gold grade for a VMS deposit, indicating significant mineralization.
- Good intercept length (19m) for an exploration program.
- New drill intercept from an exploration program expanding a recent discovery.
- True width approximation disclosed.
- Robust QA/QC procedures and QP sign-off.
Negative factors
- Cut-off grade for compositing is not explicitly stated.
Evidence · table
“2.83”
Context: 19
WR-26-016copperGrade: 0.03Grade Unit: %Intercept: 19 mView all detailsHide details
Identity
- Hole ID
- WR-26-016
- Commodity
- copper
- Ticker
- TLG
Geometry
- Grade
- 0.03
- Grade Unit
- %
- Intercept
- 19 m
- From
- 99 m
- To
- 118 m
Classification
- Deposit Type
- vms
- Program
- exploration
- Sample Type
- drill
- Group ID
- WR-26-016:99.0-118.0
- Mining Method
- mixed
QA/QC
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Metal Equivalent
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-05-19T00:00:00.000Z
Reasoning: This intercept shows a very low copper grade, contributing to the polymetallic nature but not as a significant value driver for this specific interval.
Positive factors
- New drill intercept from an exploration program expanding a recent discovery.
- True width approximation disclosed.
- Robust QA/QC procedures and QP sign-off.
Negative factors
- Grade is very low for copper, indicating it's not a primary economic driver for this interval.
- Cut-off grade for compositing is not explicitly stated.
Evidence · table
“0.03”
Context: 19
WR-26-016silverGrade: 3.05Grade Unit: g/tIntercept: 19 mView all detailsHide details
Identity
- Hole ID
- WR-26-016
- Commodity
- silver
- Ticker
- TLG
Geometry
- Grade
- 3.05
- Grade Unit
- g/t
- Intercept
- 19 m
- From
- 99 m
- To
- 118 m
Classification
- Deposit Type
- vms
- Program
- exploration
- Sample Type
- drill
- Group ID
- WR-26-016:99.0-118.0
- Mining Method
- mixed
QA/QC
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Metal Equivalent
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-05-19T00:00:00.000Z
Reasoning: This intercept shows a low silver grade, contributing to the polymetallic nature but not as a significant value driver for this specific interval.
Positive factors
- New drill intercept from an exploration program expanding a recent discovery.
- True width approximation disclosed.
- Robust QA/QC procedures and QP sign-off.
Negative factors
- Grade is low for silver, indicating it's not a primary economic driver for this interval.
- Cut-off grade for compositing is not explicitly stated.
Evidence · table
“3.05”
Context: 19
WR-26-016goldGrade: 2.92Grade Unit: g/t AuEqIntercept: 19 mView all detailsHide details
Identity
- Hole ID
- WR-26-016
- Commodity
- gold
- Ticker
- TLG
Geometry
- Grade
- 2.92
- Grade Unit
- g/t AuEq
- Intercept
- 19 m
- From
- 99 m
- To
- 118 m
Classification
- Deposit Type
- vms
- Program
- exploration
- Sample Type
- drill
- Group ID
- WR-26-016:99.0-118.0
- Mining Method
- mixed
QA/QC
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Metal Equivalent
- Metal Eq. Grade
- 2.92
- Metal Eq. Unit
- g/t AuEq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-05-19T00:00:00.000Z
Reasoning: This headline intercept represents a strong gold equivalent grade over a significant width, materially expanding the West Rim discovery and indicating high potential. The metal equivalent calculation is transparent.
Positive factors
- Strong gold equivalent grade (2.92 g/t AuEq) over a significant width (19m) for a VMS deposit.
- GT product (55.48 g/t·m) is moderate to strong, indicating significant contained metal.
- New drill intercept from an exploration program expanding a recent discovery.
- True width approximation disclosed.
- Metal equivalent assumptions are disclosed.
- Robust QA/QC procedures and QP sign-off.
Negative factors
- Cut-off grade for compositing is not explicitly stated.
Evidence · table
“2.92”
Context: 19
WR-26-016goldGrade: 6.3Grade Unit: g/tIntercept: 1 mView all detailsHide details
Identity
- Hole ID
- WR-26-016
- Commodity
- gold
- Ticker
- TLG
Geometry
- Grade
- 6.3
- Grade Unit
- g/t
- Intercept
- 1 m
- From
- 99 m
- To
- 100 m
Classification
- Deposit Type
- vms
- Program
- exploration
- Sample Type
- drill
- Group ID
- WR-26-016:99.0-100.0
- Mining Method
- mixed
QA/QC
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Metal Equivalent
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-05-19T00:00:00.000Z
Reasoning: This sub-interval shows an exceptional gold grade, highlighting a high-grade core within the broader intercept, despite its narrow width. The GT product (6.3 g/t·m) is weak due to narrow width.
Positive factors
- Exceptional gold grade (6.3 g/t) for a VMS deposit, indicating a high-grade zone.
- New drill intercept from an exploration program expanding a recent discovery.
- True width approximation disclosed.
- Robust QA/QC procedures and QP sign-off.
Negative factors
- Narrow intercept length (1m).
- Cut-off grade for compositing is not explicitly stated.
Evidence · table
“6.30”
Context: 1
WR-26-016copperGrade: 0.01Grade Unit: %Intercept: 1 mView all detailsHide details
Identity
- Hole ID
- WR-26-016
- Commodity
- copper
- Ticker
- TLG
Geometry
- Grade
- 0.01
- Grade Unit
- %
- Intercept
- 1 m
- From
- 99 m
- To
- 100 m
Classification
- Deposit Type
- vms
- Program
- exploration
- Sample Type
- drill
- Group ID
- WR-26-016:99.0-100.0
- Mining Method
- mixed
QA/QC
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Metal Equivalent
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-05-19T00:00:00.000Z
Reasoning: This sub-interval shows a very low copper grade, contributing to the polymetallic nature but not as a significant value driver for this specific interval.
Positive factors
- New drill intercept from an exploration program expanding a recent discovery.
- True width approximation disclosed.
- Robust QA/QC procedures and QP sign-off.
Negative factors
- Grade is very low for copper, indicating it's not a primary economic driver for this interval.
- Cut-off grade for compositing is not explicitly stated.
Evidence · table
“0.01”
Context: 1
WR-26-016silverGrade: 2.4Grade Unit: g/tIntercept: 1 mView all detailsHide details
Identity
- Hole ID
- WR-26-016
- Commodity
- silver
- Ticker
- TLG
Geometry
- Grade
- 2.4
- Grade Unit
- g/t
- Intercept
- 1 m
- From
- 99 m
- To
- 100 m
Classification
- Deposit Type
- vms
- Program
- exploration
- Sample Type
- drill
- Group ID
- WR-26-016:99.0-100.0
- Mining Method
- mixed
QA/QC
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Metal Equivalent
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-05-19T00:00:00.000Z
Reasoning: This sub-interval shows a very low silver grade, contributing to the polymetallic nature but not as a significant value driver for this specific interval.
Positive factors
- New drill intercept from an exploration program expanding a recent discovery.
- True width approximation disclosed.
- Robust QA/QC procedures and QP sign-off.
Negative factors
- Grade is very low for silver, indicating it's not a primary economic driver for this interval.
- Cut-off grade for compositing is not explicitly stated.
Evidence · table
“2.40”
Context: 1
WR-26-016goldGrade: 6.34Grade Unit: g/t AuEqIntercept: 1 mView all detailsHide details
Identity
- Hole ID
- WR-26-016
- Commodity
- gold
- Ticker
- TLG
Geometry
- Grade
- 6.34
- Grade Unit
- g/t AuEq
- Intercept
- 1 m
- From
- 99 m
- To
- 100 m
Classification
- Deposit Type
- vms
- Program
- exploration
- Sample Type
- drill
- Group ID
- WR-26-016:99.0-100.0
- Mining Method
- mixed
QA/QC
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Metal Equivalent
- Metal Eq. Grade
- 6.34
- Metal Eq. Unit
- g/t AuEq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-05-19T00:00:00.000Z
Reasoning: This sub-interval shows an exceptional gold equivalent grade, highlighting a high-grade core within the broader intercept, despite its narrow width. The metal equivalent calculation is transparent.
Positive factors
- Exceptional gold equivalent grade (6.34 g/t AuEq) for a VMS deposit, indicating a high-grade zone.
- New drill intercept from an exploration program expanding a recent discovery.
- True width approximation disclosed.
- Metal equivalent assumptions are disclosed.
- Robust QA/QC procedures and QP sign-off.
Negative factors
- Narrow intercept length (1m).
- Cut-off grade for compositing is not explicitly stated.
Evidence · table
“6.34”
Context: 1
WR-26-016goldGrade: 5.82Grade Unit: g/tIntercept: 1 mView all detailsHide details
Identity
- Hole ID
- WR-26-016
- Commodity
- gold
- Ticker
- TLG
Geometry
- Grade
- 5.82
- Grade Unit
- g/t
- Intercept
- 1 m
- From
- 104 m
- To
- 105 m
Classification
- Deposit Type
- vms
- Program
- exploration
- Sample Type
- drill
- Group ID
- WR-26-016:104.0-105.0
- Mining Method
- mixed
QA/QC
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Metal Equivalent
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-05-19T00:00:00.000Z
Reasoning: This sub-interval shows an exceptional gold grade, highlighting a high-grade core within the broader intercept, despite its narrow width. The GT product (5.82 g/t·m) is weak due to narrow width.
Positive factors
- Exceptional gold grade (5.82 g/t) for a VMS deposit, indicating a high-grade zone.
- New drill intercept from an exploration program expanding a recent discovery.
- True width approximation disclosed.
- Robust QA/QC procedures and QP sign-off.
Negative factors
- Narrow intercept length (1m).
- Cut-off grade for compositing is not explicitly stated.
Evidence · table
“5.82”
Context: 1
WR-26-016copperGrade: 0Grade Unit: %Intercept: 1 mView all detailsHide details
Identity
- Hole ID
- WR-26-016
- Commodity
- copper
- Ticker
- TLG
Geometry
- Grade
- 0
- Grade Unit
- %
- Intercept
- 1 m
- From
- 104 m
- To
- 105 m
Classification
- Deposit Type
- vms
- Program
- exploration
- Sample Type
- drill
- Group ID
- WR-26-016:104.0-105.0
- Mining Method
- mixed
QA/QC
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Metal Equivalent
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-05-19T00:00:00.000Z
Reasoning: This sub-interval shows no copper grade, indicating no contribution from this metal for this specific interval.
Positive factors
- New drill intercept from an exploration program expanding a recent discovery.
- True width approximation disclosed.
- Robust QA/QC procedures and QP sign-off.
Negative factors
- Grade is zero for copper, indicating no contribution from this metal for this interval.
- Cut-off grade for compositing is not explicitly stated.
Evidence · table
“0.00”
Context: 1
WR-26-016silverGrade: 1.4Grade Unit: g/tIntercept: 1 mView all detailsHide details
Identity
- Hole ID
- WR-26-016
- Commodity
- silver
- Ticker
- TLG
Geometry
- Grade
- 1.4
- Grade Unit
- g/t
- Intercept
- 1 m
- From
- 104 m
- To
- 105 m
Classification
- Deposit Type
- vms
- Program
- exploration
- Sample Type
- drill
- Group ID
- WR-26-016:104.0-105.0
- Mining Method
- mixed
QA/QC
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Metal Equivalent
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-05-19T00:00:00.000Z
Reasoning: This sub-interval shows a very low silver grade, contributing to the polymetallic nature but not as a significant value driver for this specific interval.
Positive factors
- New drill intercept from an exploration program expanding a recent discovery.
- True width approximation disclosed.
- Robust QA/QC procedures and QP sign-off.
Negative factors
- Grade is very low for silver, indicating it's not a primary economic driver for this interval.
- Cut-off grade for compositing is not explicitly stated.
Evidence · table
“1.40”
Context: 1
WR-26-016goldGrade: 5.84Grade Unit: g/t AuEqIntercept: 1 mView all detailsHide details
Identity
- Hole ID
- WR-26-016
- Commodity
- gold
- Ticker
- TLG
Geometry
- Grade
- 5.84
- Grade Unit
- g/t AuEq
- Intercept
- 1 m
- From
- 104 m
- To
- 105 m
Classification
- Deposit Type
- vms
- Program
- exploration
- Sample Type
- drill
- Group ID
- WR-26-016:104.0-105.0
- Mining Method
- mixed
QA/QC
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Metal Equivalent
- Metal Eq. Grade
- 5.84
- Metal Eq. Unit
- g/t AuEq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-05-19T00:00:00.000Z
Reasoning: This sub-interval shows an exceptional gold equivalent grade, highlighting a high-grade core within the broader intercept, despite its narrow width. The metal equivalent calculation is transparent.
Positive factors
- Exceptional gold equivalent grade (5.84 g/t AuEq) for a VMS deposit, indicating a high-grade zone.
- New drill intercept from an exploration program expanding a recent discovery.
- True width approximation disclosed.
- Metal equivalent assumptions are disclosed.
- Robust QA/QC procedures and QP sign-off.
Negative factors
- Narrow intercept length (1m).
- Cut-off grade for compositing is not explicitly stated.
Evidence · table
“5.84”
Context: 1
WR-26-016goldGrade: 7.76Grade Unit: g/tIntercept: 5 mView all detailsHide details
Identity
- Hole ID
- WR-26-016
- Commodity
- gold
- Ticker
- TLG
Geometry
- Grade
- 7.76
- Grade Unit
- g/t
- Intercept
- 5 m
- From
- 110 m
- To
- 115 m
Classification
- Deposit Type
- vms
- Program
- exploration
- Sample Type
- drill
- Group ID
- WR-26-016:110.0-115.0
- Mining Method
- mixed
QA/QC
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Metal Equivalent
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-05-19T00:00:00.000Z
Reasoning: This sub-interval shows an exceptional gold grade over a moderate width, representing a significant high-grade component within the broader intercept. The GT product (38.8 g/t·m) is moderate to strong.
Positive factors
- Exceptional gold grade (7.76 g/t) over a moderate width (5m) for a VMS deposit, indicating a significant high-grade zone.
- New drill intercept from an exploration program expanding a recent discovery.
- True width approximation disclosed.
- Robust QA/QC procedures and QP sign-off.
Negative factors
- Cut-off grade for compositing is not explicitly stated.
Evidence · table
“7.76”
Context: 5
WR-26-016copperGrade: 0.01Grade Unit: %Intercept: 5 mView all detailsHide details
Identity
- Hole ID
- WR-26-016
- Commodity
- copper
- Ticker
- TLG
Geometry
- Grade
- 0.01
- Grade Unit
- %
- Intercept
- 5 m
- From
- 110 m
- To
- 115 m
Classification
- Deposit Type
- vms
- Program
- exploration
- Sample Type
- drill
- Group ID
- WR-26-016:110.0-115.0
- Mining Method
- mixed
QA/QC
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Metal Equivalent
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-05-19T00:00:00.000Z
Reasoning: This sub-interval shows a very low copper grade, contributing to the polymetallic nature but not as a significant value driver for this specific interval.
Positive factors
- New drill intercept from an exploration program expanding a recent discovery.
- True width approximation disclosed.
- Robust QA/QC procedures and QP sign-off.
Negative factors
- Grade is very low for copper, indicating it's not a primary economic driver for this interval.
- Cut-off grade for compositing is not explicitly stated.
Evidence · table
“0.01”
Context: 5
WR-26-016silverGrade: 3.66Grade Unit: g/tIntercept: 5 mView all detailsHide details
Identity
- Hole ID
- WR-26-016
- Commodity
- silver
- Ticker
- TLG
Geometry
- Grade
- 3.66
- Grade Unit
- g/t
- Intercept
- 5 m
- From
- 110 m
- To
- 115 m
Classification
- Deposit Type
- vms
- Program
- exploration
- Sample Type
- drill
- Group ID
- WR-26-016:110.0-115.0
- Mining Method
- mixed
QA/QC
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Metal Equivalent
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-05-19T00:00:00.000Z
Reasoning: This sub-interval shows a low silver grade, contributing to the polymetallic nature but not as a significant value driver for this specific interval.
Positive factors
- New drill intercept from an exploration program expanding a recent discovery.
- True width approximation disclosed.
- Robust QA/QC procedures and QP sign-off.
Negative factors
- Grade is low for silver, indicating it's not a primary economic driver for this interval.
- Cut-off grade for compositing is not explicitly stated.
Evidence · table
“3.66”
Context: 5
WR-26-016goldGrade: 7.82Grade Unit: g/t AuEqIntercept: 5 mView all detailsHide details
Identity
- Hole ID
- WR-26-016
- Commodity
- gold
- Ticker
- TLG
Geometry
- Grade
- 7.82
- Grade Unit
- g/t AuEq
- Intercept
- 5 m
- From
- 110 m
- To
- 115 m
Classification
- Deposit Type
- vms
- Program
- exploration
- Sample Type
- drill
- Group ID
- WR-26-016:110.0-115.0
- Mining Method
- mixed
QA/QC
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Metal Equivalent
- Metal Eq. Grade
- 7.82
- Metal Eq. Unit
- g/t AuEq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-05-19T00:00:00.000Z
Reasoning: This sub-interval shows an exceptional gold equivalent grade over a moderate width, representing a significant high-grade component within the broader intercept. The metal equivalent calculation is transparent.
Positive factors
- Exceptional gold equivalent grade (7.82 g/t AuEq) over a moderate width (5m) for a VMS deposit, indicating a significant high-grade zone.
- New drill intercept from an exploration program expanding a recent discovery.
- True width approximation disclosed.
- Metal equivalent assumptions are disclosed.
- Robust QA/QC procedures and QP sign-off.
Negative factors
- Cut-off grade for compositing is not explicitly stated.
Evidence · table
“7.82”
Context: 5
WR-26-016goldGrade: 15.3Grade Unit: g/tIntercept: 2 mView all detailsHide details
Identity
- Hole ID
- WR-26-016
- Commodity
- gold
- Ticker
- TLG
Geometry
- Grade
- 15.3
- Grade Unit
- g/t
- Intercept
- 2 m
- From
- 113 m
- To
- 115 m
Classification
- Deposit Type
- vms
- Program
- exploration
- Sample Type
- drill
- Group ID
- WR-26-016:113.0-115.0
- Mining Method
- mixed
QA/QC
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Metal Equivalent
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-05-19T00:00:00.000Z
Reasoning: This sub-interval shows a bonanza gold grade, representing a very high-grade core within the broader intercept, despite its narrow width. The GT product (30.6 g/t·m) is moderate.
Positive factors
- Bonanza gold grade (15.3 g/t) for a VMS deposit, indicating a very high-grade zone.
- New drill intercept from an exploration program expanding a recent discovery.
- True width approximation disclosed.
- Robust QA/QC procedures and QP sign-off.
Negative factors
- Narrow intercept length (2m).
- Cut-off grade for compositing is not explicitly stated.
Evidence · table
“15.30”
Context: 2
WR-26-016copperGrade: 0.01Grade Unit: %Intercept: 2 mView all detailsHide details
Identity
- Hole ID
- WR-26-016
- Commodity
- copper
- Ticker
- TLG
Geometry
- Grade
- 0.01
- Grade Unit
- %
- Intercept
- 2 m
- From
- 113 m
- To
- 115 m
Classification
- Deposit Type
- vms
- Program
- exploration
- Sample Type
- drill
- Group ID
- WR-26-016:113.0-115.0
- Mining Method
- mixed
QA/QC
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Metal Equivalent
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-05-19T00:00:00.000Z
Reasoning: This sub-interval shows a very low copper grade, contributing to the polymetallic nature but not as a significant value driver for this specific interval.
Positive factors
- New drill intercept from an exploration program expanding a recent discovery.
- True width approximation disclosed.
- Robust QA/QC procedures and QP sign-off.
Negative factors
- Grade is very low for copper, indicating it's not a primary economic driver for this interval.
- Cut-off grade for compositing is not explicitly stated.
Evidence · table
“0.01”
Context: 2
WR-26-016silverGrade: 5.15Grade Unit: g/tIntercept: 2 mView all detailsHide details
Identity
- Hole ID
- WR-26-016
- Commodity
- silver
- Ticker
- TLG
Geometry
- Grade
- 5.15
- Grade Unit
- g/t
- Intercept
- 2 m
- From
- 113 m
- To
- 115 m
Classification
- Deposit Type
- vms
- Program
- exploration
- Sample Type
- drill
- Group ID
- WR-26-016:113.0-115.0
- Mining Method
- mixed
QA/QC
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Metal Equivalent
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-05-19T00:00:00.000Z
Reasoning: This sub-interval shows a low silver grade, contributing to the polymetallic nature but not as a significant value driver for this specific interval.
Positive factors
- New drill intercept from an exploration program expanding a recent discovery.
- True width approximation disclosed.
- Robust QA/QC procedures and QP sign-off.
Negative factors
- Grade is low for silver, indicating it's not a primary economic driver for this interval.
- Cut-off grade for compositing is not explicitly stated.
Evidence · table
“5.15”
Context: 2
WR-26-016goldGrade: 15.37Grade Unit: g/t AuEqIntercept: 2 mView all detailsHide details
Identity
- Hole ID
- WR-26-016
- Commodity
- gold
- Ticker
- TLG
Geometry
- Grade
- 15.37
- Grade Unit
- g/t AuEq
- Intercept
- 2 m
- From
- 113 m
- To
- 115 m
Classification
- Deposit Type
- vms
- Program
- exploration
- Sample Type
- drill
- Group ID
- WR-26-016:113.0-115.0
- Mining Method
- mixed
QA/QC
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Metal Equivalent
- Metal Eq. Grade
- 15.37
- Metal Eq. Unit
- g/t AuEq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-05-19T00:00:00.000Z
Reasoning: This sub-interval shows a bonanza gold equivalent grade, representing a very high-grade core within the broader intercept, despite its narrow width. The metal equivalent calculation is transparent.
Positive factors
- Bonanza gold equivalent grade (15.37 g/t AuEq) for a VMS deposit, indicating a very high-grade zone.
- New drill intercept from an exploration program expanding a recent discovery.
- True width approximation disclosed.
- Metal equivalent assumptions are disclosed.
- Robust QA/QC procedures and QP sign-off.
Negative factors
- Narrow intercept length (2m).
- Cut-off grade for compositing is not explicitly stated.
Evidence · table
“15.37”
Context: 2
WR-26-017goldGrade: 0.62Grade Unit: g/tIntercept: 12 mView all detailsHide details
Identity
- Hole ID
- WR-26-017
- Commodity
- gold
- Ticker
- TLG
Geometry
- Grade
- 0.62
- Grade Unit
- g/t
- Intercept
- 12 m
- From
- 41 m
- To
- 53 m
Classification
- Deposit Type
- vms
- Program
- exploration
- Sample Type
- drill
- Group ID
- WR-26-017:41.0-53.0
- Mining Method
- mixed
QA/QC
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Metal Equivalent
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-05-19T00:00:00.000Z
Reasoning: This intercept shows a moderate gold grade over a moderate width, contributing to the overall understanding and expansion of the West Rim discovery. The GT product (7.44 g/t·m) is weak.
Positive factors
- Moderate gold grade for a VMS deposit over a moderate width (12m).
- New drill intercept from an exploration program expanding a recent discovery.
- True width approximation disclosed.
- Robust QA/QC procedures and QP sign-off.
Negative factors
- Cut-off grade for compositing is not explicitly stated.
Evidence · table
“0.62”
Context: 12
WR-26-017copperGrade: 0.01Grade Unit: %Intercept: 12 mView all detailsHide details
Identity
- Hole ID
- WR-26-017
- Commodity
- copper
- Ticker
- TLG
Geometry
- Grade
- 0.01
- Grade Unit
- %
- Intercept
- 12 m
- From
- 41 m
- To
- 53 m
Classification
- Deposit Type
- vms
- Program
- exploration
- Sample Type
- drill
- Group ID
- WR-26-017:41.0-53.0
- Mining Method
- mixed
QA/QC
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Metal Equivalent
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-05-19T00:00:00.000Z
Reasoning: This intercept shows a very low copper grade, contributing to the polymetallic nature but not as a significant value driver for this specific interval.
Positive factors
- New drill intercept from an exploration program expanding a recent discovery.
- True width approximation disclosed.
- Robust QA/QC procedures and QP sign-off.
Negative factors
- Grade is very low for copper, indicating it's not a primary economic driver for this interval.
- Cut-off grade for compositing is not explicitly stated.
Evidence · table
“0.01”
Context: 12
WR-26-017silverGrade: 1.11Grade Unit: g/tIntercept: 12 mView all detailsHide details
Identity
- Hole ID
- WR-26-017
- Commodity
- silver
- Ticker
- TLG
Geometry
- Grade
- 1.11
- Grade Unit
- g/t
- Intercept
- 12 m
- From
- 41 m
- To
- 53 m
Classification
- Deposit Type
- vms
- Program
- exploration
- Sample Type
- drill
- Group ID
- WR-26-017:41.0-53.0
- Mining Method
- mixed
QA/QC
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Metal Equivalent
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-05-19T00:00:00.000Z
Reasoning: This intercept shows a very low silver grade, contributing to the polymetallic nature but not as a significant value driver for this specific interval.
Positive factors
- New drill intercept from an exploration program expanding a recent discovery.
- True width approximation disclosed.
- Robust QA/QC procedures and QP sign-off.
Negative factors
- Grade is very low for silver, indicating it's not a primary economic driver for this interval.
- Cut-off grade for compositing is not explicitly stated.
Evidence · table
“1.11”
Context: 12
WR-26-017goldGrade: 0.65Grade Unit: g/t AuEqIntercept: 12 mView all detailsHide details
Identity
- Hole ID
- WR-26-017
- Commodity
- gold
- Ticker
- TLG
Geometry
- Grade
- 0.65
- Grade Unit
- g/t AuEq
- Intercept
- 12 m
- From
- 41 m
- To
- 53 m
Classification
- Deposit Type
- vms
- Program
- exploration
- Sample Type
- drill
- Group ID
- WR-26-017:41.0-53.0
- Mining Method
- mixed
QA/QC
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Metal Equivalent
- Metal Eq. Grade
- 0.65
- Metal Eq. Unit
- g/t AuEq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-05-19T00:00:00.000Z
Reasoning: This intercept shows a moderate gold equivalent grade over a moderate width, contributing to the overall understanding and expansion of the West Rim discovery. The metal equivalent calculation is transparent.
Positive factors
- Moderate gold equivalent grade (0.65 g/t AuEq) over a moderate width (12m) for a VMS deposit.
- New drill intercept from an exploration program expanding a recent discovery.
- True width approximation disclosed.
- Metal equivalent assumptions are disclosed.
- Robust QA/QC procedures and QP sign-off.
Negative factors
- Cut-off grade for compositing is not explicitly stated.
Evidence · table
“0.65”
Context: 12
WR-26-017goldGrade: 2.37Grade Unit: g/tIntercept: 2 mView all detailsHide details
Identity
- Hole ID
- WR-26-017
- Commodity
- gold
- Ticker
- TLG
Geometry
- Grade
- 2.37
- Grade Unit
- g/t
- Intercept
- 2 m
- From
- 44 m
- To
- 46 m
Classification
- Deposit Type
- vms
- Program
- exploration
- Sample Type
- drill
- Group ID
- WR-26-017:44.0-46.0
- Mining Method
- mixed
QA/QC
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Metal Equivalent
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-05-19T00:00:00.000Z
Reasoning: This sub-interval shows a strong gold grade, highlighting a high-grade core within the broader intercept, despite its narrow width. The GT product (4.74 g/t·m) is weak.
Positive factors
- Strong gold grade (2.37 g/t) for a VMS deposit, indicating a high-grade zone.
- New drill intercept from an exploration program expanding a recent discovery.
- True width approximation disclosed.
- Robust QA/QC procedures and QP sign-off.
Negative factors
- Narrow intercept length (2m).
- Cut-off grade for compositing is not explicitly stated.
Evidence · table
“2.37”
Context: 2
WR-26-017copperGrade: 0.02Grade Unit: %Intercept: 2 mView all detailsHide details
Identity
- Hole ID
- WR-26-017
- Commodity
- copper
- Ticker
- TLG
Geometry
- Grade
- 0.02
- Grade Unit
- %
- Intercept
- 2 m
- From
- 44 m
- To
- 46 m
Classification
- Deposit Type
- vms
- Program
- exploration
- Sample Type
- drill
- Group ID
- WR-26-017:44.0-46.0
- Mining Method
- mixed
QA/QC
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Metal Equivalent
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-05-19T00:00:00.000Z
Reasoning: This sub-interval shows a very low copper grade, contributing to the polymetallic nature but not as a significant value driver for this specific interval.
Positive factors
- New drill intercept from an exploration program expanding a recent discovery.
- True width approximation disclosed.
- Robust QA/QC procedures and QP sign-off.
Negative factors
- Grade is very low for copper, indicating it's not a primary economic driver for this interval.
- Cut-off grade for compositing is not explicitly stated.
Evidence · table
“0.02”
Context: 2
WR-26-017silverGrade: 1.85Grade Unit: g/tIntercept: 2 mView all detailsHide details
Identity
- Hole ID
- WR-26-017
- Commodity
- silver
- Ticker
- TLG
Geometry
- Grade
- 1.85
- Grade Unit
- g/t
- Intercept
- 2 m
- From
- 44 m
- To
- 46 m
Classification
- Deposit Type
- vms
- Program
- exploration
- Sample Type
- drill
- Group ID
- WR-26-017:44.0-46.0
- Mining Method
- mixed
QA/QC
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Metal Equivalent
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-05-19T00:00:00.000Z
Reasoning: This sub-interval shows a very low silver grade, contributing to the polymetallic nature but not as a significant value driver for this specific interval.
Positive factors
- New drill intercept from an exploration program expanding a recent discovery.
- True width approximation disclosed.
- Robust QA/QC procedures and QP sign-off.
Negative factors
- Grade is very low for silver, indicating it's not a primary economic driver for this interval.
- Cut-off grade for compositing is not explicitly stated.
Evidence · table
“1.85”
Context: 2
WR-26-017goldGrade: 2.42Grade Unit: g/t AuEqIntercept: 2 mView all detailsHide details
Identity
- Hole ID
- WR-26-017
- Commodity
- gold
- Ticker
- TLG
Geometry
- Grade
- 2.42
- Grade Unit
- g/t AuEq
- Intercept
- 2 m
- From
- 44 m
- To
- 46 m
Classification
- Deposit Type
- vms
- Program
- exploration
- Sample Type
- drill
- Group ID
- WR-26-017:44.0-46.0
- Mining Method
- mixed
QA/QC
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Metal Equivalent
- Metal Eq. Grade
- 2.42
- Metal Eq. Unit
- g/t AuEq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-05-19T00:00:00.000Z
Reasoning: This sub-interval shows a strong gold equivalent grade, highlighting a high-grade core within the broader intercept, despite its narrow width. The metal equivalent calculation is transparent.
Positive factors
- Strong gold equivalent grade (2.42 g/t AuEq) for a VMS deposit, indicating a high-grade zone.
- New drill intercept from an exploration program expanding a recent discovery.
- True width approximation disclosed.
- Metal equivalent assumptions are disclosed.
- Robust QA/QC procedures and QP sign-off.
Negative factors
- Narrow intercept length (2m).
- Cut-off grade for compositing is not explicitly stated.
Evidence · table
“2.42”
Context: 2
WR-26-019goldGrade: 1.94Grade Unit: g/tIntercept: 20 mView all detailsHide details
Identity
- Hole ID
- WR-26-019
- Commodity
- gold
- Ticker
- TLG
Geometry
- Grade
- 1.94
- Grade Unit
- g/t
- Intercept
- 20 m
- From
- 48 m
- To
- 68 m
Classification
- Deposit Type
- vms
- Program
- exploration
- Sample Type
- drill
- Group ID
- WR-26-019:48.0-68.0
- Mining Method
- mixed
QA/QC
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Metal Equivalent
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-05-19T00:00:00.000Z
Reasoning: This intercept shows a strong gold grade over a strong width, contributing materially to the expansion of the West Rim discovery. The GT product (38.8 g/t·m) is moderate to strong.
Positive factors
- Strong gold grade (1.94 g/t) over a strong width (20m) for a VMS deposit, indicating significant mineralization.
- New drill intercept from an exploration program expanding a recent discovery.
- True width approximation disclosed.
- Robust QA/QC procedures and QP sign-off.
Negative factors
- Cut-off grade for compositing is not explicitly stated.
Evidence · table
“1.94”
Context: 20
WR-26-019copperGrade: 0.01Grade Unit: %Intercept: 20 mView all detailsHide details
Identity
- Hole ID
- WR-26-019
- Commodity
- copper
- Ticker
- TLG
Geometry
- Grade
- 0.01
- Grade Unit
- %
- Intercept
- 20 m
- From
- 48 m
- To
- 68 m
Classification
- Deposit Type
- vms
- Program
- exploration
- Sample Type
- drill
- Group ID
- WR-26-019:48.0-68.0
- Mining Method
- mixed
QA/QC
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Metal Equivalent
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-05-19T00:00:00.000Z
Reasoning: This intercept shows a very low copper grade, contributing to the polymetallic nature but not as a significant value driver for this specific interval.
Positive factors
- New drill intercept from an exploration program expanding a recent discovery.
- True width approximation disclosed.
- Robust QA/QC procedures and QP sign-off.
Negative factors
- Grade is very low for copper, indicating it's not a primary economic driver for this interval.
- Cut-off grade for compositing is not explicitly stated.
Evidence · table
“0.01”
Context: 20
WR-26-019silverGrade: 1.22Grade Unit: g/tIntercept: 20 mView all detailsHide details
Identity
- Hole ID
- WR-26-019
- Commodity
- silver
- Ticker
- TLG
Geometry
- Grade
- 1.22
- Grade Unit
- g/t
- Intercept
- 20 m
- From
- 48 m
- To
- 68 m
Classification
- Deposit Type
- vms
- Program
- exploration
- Sample Type
- drill
- Group ID
- WR-26-019:48.0-68.0
- Mining Method
- mixed
QA/QC
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Metal Equivalent
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-05-19T00:00:00.000Z
Reasoning: This intercept shows a very low silver grade, contributing to the polymetallic nature but not as a significant value driver for this specific interval.
Positive factors
- New drill intercept from an exploration program expanding a recent discovery.
- True width approximation disclosed.
- Robust QA/QC procedures and QP sign-off.
Negative factors
- Grade is very low for silver, indicating it's not a primary economic driver for this interval.
- Cut-off grade for compositing is not explicitly stated.
Evidence · table
“1.22”
Context: 20
WR-26-019goldGrade: 1.97Grade Unit: g/t AuEqIntercept: 20 mView all detailsHide details
Identity
- Hole ID
- WR-26-019
- Commodity
- gold
- Ticker
- TLG
Geometry
- Grade
- 1.97
- Grade Unit
- g/t AuEq
- Intercept
- 20 m
- From
- 48 m
- To
- 68 m
Classification
- Deposit Type
- vms
- Program
- exploration
- Sample Type
- drill
- Group ID
- WR-26-019:48.0-68.0
- Mining Method
- mixed
QA/QC
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Metal Equivalent
- Metal Eq. Grade
- 1.97
- Metal Eq. Unit
- g/t AuEq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-05-19T00:00:00.000Z
Reasoning: This headline intercept represents a strong gold equivalent grade over a strong width, materially expanding the West Rim discovery and indicating high potential. The metal equivalent calculation is transparent.
Positive factors
- Strong gold equivalent grade (1.97 g/t AuEq) over a strong width (20m) for a VMS deposit.
- GT product (39.4 g/t·m) is moderate to strong, indicating significant contained metal.
- New drill intercept from an exploration program expanding a recent discovery.
- True width approximation disclosed.
- Metal equivalent assumptions are disclosed.
- Robust QA/QC procedures and QP sign-off.
Negative factors
- Cut-off grade for compositing is not explicitly stated.
Evidence · table
“1.97”
Context: 20
WR-26-019goldGrade: 5.92Grade Unit: g/tIntercept: 6 mView all detailsHide details
Identity
- Hole ID
- WR-26-019
- Commodity
- gold
- Ticker
- TLG
Geometry
- Grade
- 5.92
- Grade Unit
- g/t
- Intercept
- 6 m
- From
- 60 m
- To
- 66 m
Classification
- Deposit Type
- vms
- Program
- exploration
- Sample Type
- drill
- Group ID
- WR-26-019:60.0-66.0
- Mining Method
- mixed
QA/QC
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Metal Equivalent
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-05-19T00:00:00.000Z
Reasoning: This sub-interval shows an exceptional gold grade over a moderate width, representing a significant high-grade component within the broader intercept. The GT product (35.52 g/t·m) is moderate.
Positive factors
- Exceptional gold grade (5.92 g/t) over a moderate width (6m) for a VMS deposit, indicating a significant high-grade zone.
- New drill intercept from an exploration program expanding a recent discovery.
- True width approximation disclosed.
- Robust QA/QC procedures and QP sign-off.
Negative factors
- Cut-off grade for compositing is not explicitly stated.
Evidence · table
“5.92”
Context: 6
WR-26-019copperGrade: 0.01Grade Unit: %Intercept: 6 mView all detailsHide details
Identity
- Hole ID
- WR-26-019
- Commodity
- copper
- Ticker
- TLG
Geometry
- Grade
- 0.01
- Grade Unit
- %
- Intercept
- 6 m
- From
- 60 m
- To
- 66 m
Classification
- Deposit Type
- vms
- Program
- exploration
- Sample Type
- drill
- Group ID
- WR-26-019:60.0-66.0
- Mining Method
- mixed
QA/QC
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Metal Equivalent
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-05-19T00:00:00.000Z
Reasoning: This sub-interval shows a very low copper grade, contributing to the polymetallic nature but not as a significant value driver for this specific interval.
Positive factors
- New drill intercept from an exploration program expanding a recent discovery.
- True width approximation disclosed.
- Robust QA/QC procedures and QP sign-off.
Negative factors
- Grade is very low for copper, indicating it's not a primary economic driver for this interval.
- Cut-off grade for compositing is not explicitly stated.
Evidence · table
“0.01”
Context: 6
WR-26-019silverGrade: 2.1Grade Unit: g/tIntercept: 6 mView all detailsHide details
Identity
- Hole ID
- WR-26-019
- Commodity
- silver
- Ticker
- TLG
Geometry
- Grade
- 2.1
- Grade Unit
- g/t
- Intercept
- 6 m
- From
- 60 m
- To
- 66 m
Classification
- Deposit Type
- vms
- Program
- exploration
- Sample Type
- drill
- Group ID
- WR-26-019:60.0-66.0
- Mining Method
- mixed
QA/QC
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Metal Equivalent
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-05-19T00:00:00.000Z
Reasoning: This sub-interval shows a very low silver grade, contributing to the polymetallic nature but not as a significant value driver for this specific interval.
Positive factors
- New drill intercept from an exploration program expanding a recent discovery.
- True width approximation disclosed.
- Robust QA/QC procedures and QP sign-off.
Negative factors
- Grade is very low for silver, indicating it's not a primary economic driver for this interval.
- Cut-off grade for compositing is not explicitly stated.
Evidence · table
“2.10”
Context: 6
WR-26-019goldGrade: 5.96Grade Unit: g/t AuEqIntercept: 6 mView all detailsHide details
Identity
- Hole ID
- WR-26-019
- Commodity
- gold
- Ticker
- TLG
Geometry
- Grade
- 5.96
- Grade Unit
- g/t AuEq
- Intercept
- 6 m
- From
- 60 m
- To
- 66 m
Classification
- Deposit Type
- vms
- Program
- exploration
- Sample Type
- drill
- Group ID
- WR-26-019:60.0-66.0
- Mining Method
- mixed
QA/QC
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Metal Equivalent
- Metal Eq. Grade
- 5.96
- Metal Eq. Unit
- g/t AuEq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-05-19T00:00:00.000Z
Reasoning: This sub-interval shows an exceptional gold equivalent grade over a moderate width, representing a significant high-grade component within the broader intercept. The metal equivalent calculation is transparent.
Positive factors
- Exceptional gold equivalent grade (5.96 g/t AuEq) over a moderate width (6m) for a VMS deposit, indicating a significant high-grade zone.
- New drill intercept from an exploration program expanding a recent discovery.
- True width approximation disclosed.
- Metal equivalent assumptions are disclosed.
- Robust QA/QC procedures and QP sign-off.
Negative factors
- Cut-off grade for compositing is not explicitly stated.
Evidence · table
“5.96”
Context: 6
WR-26-019goldGrade: 15.49Grade Unit: g/tIntercept: 2 mView all detailsHide details
Identity
- Hole ID
- WR-26-019
- Commodity
- gold
- Ticker
- TLG
Geometry
- Grade
- 15.49
- Grade Unit
- g/t
- Intercept
- 2 m
- From
- 63 m
- To
- 65 m
Classification
- Deposit Type
- vms
- Program
- exploration
- Sample Type
- drill
- Group ID
- WR-26-019:63.0-65.0
- Mining Method
- mixed
QA/QC
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Metal Equivalent
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-05-19T00:00:00.000Z
Reasoning: This sub-interval shows a bonanza gold grade, representing a very high-grade core within the broader intercept, despite its narrow width. The GT product (30.98 g/t·m) is moderate.
Positive factors
- Bonanza gold grade (15.49 g/t) for a VMS deposit, indicating a very high-grade zone.
- New drill intercept from an exploration program expanding a recent discovery.
- True width approximation disclosed.
- Robust QA/QC procedures and QP sign-off.
Negative factors
- Narrow intercept length (2m).
- Cut-off grade for compositing is not explicitly stated.
Evidence · table
“15.49”
Context: 2
WR-26-019copperGrade: 0.01Grade Unit: %Intercept: 2 mView all detailsHide details
Identity
- Hole ID
- WR-26-019
- Commodity
- copper
- Ticker
- TLG
Geometry
- Grade
- 0.01
- Grade Unit
- %
- Intercept
- 2 m
- From
- 63 m
- To
- 65 m
Classification
- Deposit Type
- vms
- Program
- exploration
- Sample Type
- drill
- Group ID
- WR-26-019:63.0-65.0
- Mining Method
- mixed
QA/QC
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Metal Equivalent
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-05-19T00:00:00.000Z
Reasoning: This sub-interval shows a very low copper grade, contributing to the polymetallic nature but not as a significant value driver for this specific interval.
Positive factors
- New drill intercept from an exploration program expanding a recent discovery.
- True width approximation disclosed.
- Robust QA/QC procedures and QP sign-off.
Negative factors
- Grade is very low for copper, indicating it's not a primary economic driver for this interval.
- Cut-off grade for compositing is not explicitly stated.
Evidence · table
“0.01”
Context: 2
WR-26-019silverGrade: 3.5Grade Unit: g/tIntercept: 2 mView all detailsHide details
Identity
- Hole ID
- WR-26-019
- Commodity
- silver
- Ticker
- TLG
Geometry
- Grade
- 3.5
- Grade Unit
- g/t
- Intercept
- 2 m
- From
- 63 m
- To
- 65 m
Classification
- Deposit Type
- vms
- Program
- exploration
- Sample Type
- drill
- Group ID
- WR-26-019:63.0-65.0
- Mining Method
- mixed
QA/QC
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Metal Equivalent
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-05-19T00:00:00.000Z
Reasoning: This sub-interval shows a low silver grade, contributing to the polymetallic nature but not as a significant value driver for this specific interval.
Positive factors
- New drill intercept from an exploration program expanding a recent discovery.
- True width approximation disclosed.
- Robust QA/QC procedures and QP sign-off.
Negative factors
- Grade is low for silver, indicating it's not a primary economic driver for this interval.
- Cut-off grade for compositing is not explicitly stated.
Evidence · table
“3.50”
Context: 2
WR-26-019goldGrade: 15.54Grade Unit: g/t AuEqIntercept: 2 mView all detailsHide details
Identity
- Hole ID
- WR-26-019
- Commodity
- gold
- Ticker
- TLG
Geometry
- Grade
- 15.54
- Grade Unit
- g/t AuEq
- Intercept
- 2 m
- From
- 63 m
- To
- 65 m
Classification
- Deposit Type
- vms
- Program
- exploration
- Sample Type
- drill
- Group ID
- WR-26-019:63.0-65.0
- Mining Method
- mixed
QA/QC
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Metal Equivalent
- Metal Eq. Grade
- 15.54
- Metal Eq. Unit
- g/t AuEq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-05-19T00:00:00.000Z
Reasoning: This sub-interval shows a bonanza gold equivalent grade, representing a very high-grade core within the broader intercept, despite its narrow width. The metal equivalent calculation is transparent.
Positive factors
- Bonanza gold equivalent grade (15.54 g/t AuEq) for a VMS deposit, indicating a very high-grade zone.
- New drill intercept from an exploration program expanding a recent discovery.
- True width approximation disclosed.
- Metal equivalent assumptions are disclosed.
- Robust QA/QC procedures and QP sign-off.
Negative factors
- Narrow intercept length (2m).
- Cut-off grade for compositing is not explicitly stated.
Evidence · table
“15.54”
Context: 2
WR-26-020goldGrade: 0.36Grade Unit: g/tIntercept: 10 mView all detailsHide details
Identity
- Hole ID
- WR-26-020
- Commodity
- gold
- Ticker
- TLG
Geometry
- Grade
- 0.36
- Grade Unit
- g/t
- Intercept
- 10 m
- From
- 62 m
- To
- 72 m
Classification
- Deposit Type
- vms
- Program
- exploration
- Sample Type
- drill
- Group ID
- WR-26-020:62.0-72.0
- Mining Method
- mixed
QA/QC
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Metal Equivalent
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-05-19T00:00:00.000Z
Reasoning: This intercept shows a moderate gold grade over a moderate width, contributing to the overall understanding and expansion of the West Rim discovery. The GT product (3.6 g/t·m) is weak.
Positive factors
- Moderate gold grade for a VMS deposit over a moderate width (10m).
- New drill intercept from an exploration program expanding a recent discovery.
- True width approximation disclosed.
- Robust QA/QC procedures and QP sign-off.
Negative factors
- Cut-off grade for compositing is not explicitly stated.
Evidence · table
“0.36”
Context: 10
WR-26-020copperGrade: 0.01Grade Unit: %Intercept: 10 mView all detailsHide details
Identity
- Hole ID
- WR-26-020
- Commodity
- copper
- Ticker
- TLG
Geometry
- Grade
- 0.01
- Grade Unit
- %
- Intercept
- 10 m
- From
- 62 m
- To
- 72 m
Classification
- Deposit Type
- vms
- Program
- exploration
- Sample Type
- drill
- Group ID
- WR-26-020:62.0-72.0
- Mining Method
- mixed
QA/QC
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Metal Equivalent
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-05-19T00:00:00.000Z
Reasoning: This intercept shows a very low copper grade, contributing to the polymetallic nature but not as a significant value driver for this specific interval.
Positive factors
- New drill intercept from an exploration program expanding a recent discovery.
- True width approximation disclosed.
- Robust QA/QC procedures and QP sign-off.
Negative factors
- Grade is very low for copper, indicating it's not a primary economic driver for this interval.
- Cut-off grade for compositing is not explicitly stated.
Evidence · table
“0.01”
Context: 10
WR-26-020silverGrade: 1.06Grade Unit: g/tIntercept: 10 mView all detailsHide details
Identity
- Hole ID
- WR-26-020
- Commodity
- silver
- Ticker
- TLG
Geometry
- Grade
- 1.06
- Grade Unit
- g/t
- Intercept
- 10 m
- From
- 62 m
- To
- 72 m
Classification
- Deposit Type
- vms
- Program
- exploration
- Sample Type
- drill
- Group ID
- WR-26-020:62.0-72.0
- Mining Method
- mixed
QA/QC
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Metal Equivalent
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-05-19T00:00:00.000Z
Reasoning: This intercept shows a very low silver grade, contributing to the polymetallic nature but not as a significant value driver for this specific interval.
Positive factors
- New drill intercept from an exploration program expanding a recent discovery.
- True width approximation disclosed.
- Robust QA/QC procedures and QP sign-off.
Negative factors
- Grade is very low for silver, indicating it's not a primary economic driver for this interval.
- Cut-off grade for compositing is not explicitly stated.
Evidence · table
“1.06”
Context: 10
WR-26-020goldGrade: 0.4Grade Unit: g/t AuEqIntercept: 10 mView all detailsHide details
Identity
- Hole ID
- WR-26-020
- Commodity
- gold
- Ticker
- TLG
Geometry
- Grade
- 0.4
- Grade Unit
- g/t AuEq
- Intercept
- 10 m
- From
- 62 m
- To
- 72 m
Classification
- Deposit Type
- vms
- Program
- exploration
- Sample Type
- drill
- Group ID
- WR-26-020:62.0-72.0
- Mining Method
- mixed
QA/QC
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Metal Equivalent
- Metal Eq. Grade
- 0.4
- Metal Eq. Unit
- g/t AuEq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-05-19T00:00:00.000Z
Reasoning: This intercept shows a moderate gold equivalent grade over a moderate width, contributing to the overall understanding and expansion of the West Rim discovery. The metal equivalent calculation is transparent.
Positive factors
- Moderate gold equivalent grade (0.4 g/t AuEq) over a moderate width (10m) for a VMS deposit.
- New drill intercept from an exploration program expanding a recent discovery.
- True width approximation disclosed.
- Metal equivalent assumptions are disclosed.
- Robust QA/QC procedures and QP sign-off.
Negative factors
- Cut-off grade for compositing is not explicitly stated.
Evidence · table
“0.40”
Context: 10
WR-26-020goldGrade: 1.67Grade Unit: g/tIntercept: 1 mView all detailsHide details
Identity
- Hole ID
- WR-26-020
- Commodity
- gold
- Ticker
- TLG
Geometry
- Grade
- 1.67
- Grade Unit
- g/t
- Intercept
- 1 m
- From
- 63 m
- To
- 64 m
Classification
- Deposit Type
- vms
- Program
- exploration
- Sample Type
- drill
- Group ID
- WR-26-020:63.0-64.0
- Mining Method
- mixed
QA/QC
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Metal Equivalent
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-05-19T00:00:00.000Z
Reasoning: This sub-interval shows a strong gold grade, highlighting a high-grade core within the broader intercept, despite its narrow width. The GT product (1.67 g/t·m) is weak.
Positive factors
- Strong gold grade (1.67 g/t) for a VMS deposit, indicating a high-grade zone.
- New drill intercept from an exploration program expanding a recent discovery.
- True width approximation disclosed.
- Robust QA/QC procedures and QP sign-off.
Negative factors
- Narrow intercept length (1m).
- Cut-off grade for compositing is not explicitly stated.
Evidence · table
“1.67”
Context: 1
WR-26-020copperGrade: 0Grade Unit: %Intercept: 1 mView all detailsHide details
Identity
- Hole ID
- WR-26-020
- Commodity
- copper
- Ticker
- TLG
Geometry
- Grade
- 0
- Grade Unit
- %
- Intercept
- 1 m
- From
- 63 m
- To
- 64 m
Classification
- Deposit Type
- vms
- Program
- exploration
- Sample Type
- drill
- Group ID
- WR-26-020:63.0-64.0
- Mining Method
- mixed
QA/QC
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Metal Equivalent
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-05-19T00:00:00.000Z
Reasoning: This sub-interval shows no copper grade, indicating no contribution from this metal for this specific interval.
Positive factors
- New drill intercept from an exploration program expanding a recent discovery.
- True width approximation disclosed.
- Robust QA/QC procedures and QP sign-off.
Negative factors
- Grade is zero for copper, indicating no contribution from this metal for this interval.
- Cut-off grade for compositing is not explicitly stated.
Evidence · table
“0.00”
Context: 1
WR-26-020silverGrade: 0.5Grade Unit: g/tIntercept: 1 mView all detailsHide details
Identity
- Hole ID
- WR-26-020
- Commodity
- silver
- Ticker
- TLG
Geometry
- Grade
- 0.5
- Grade Unit
- g/t
- Intercept
- 1 m
- From
- 63 m
- To
- 64 m
Classification
- Deposit Type
- vms
- Program
- exploration
- Sample Type
- drill
- Group ID
- WR-26-020:63.0-64.0
- Mining Method
- mixed
QA/QC
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Metal Equivalent
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-05-19T00:00:00.000Z
Reasoning: This sub-interval shows a very low silver grade, contributing to the polymetallic nature but not as a significant value driver for this specific interval.
Positive factors
- New drill intercept from an exploration program expanding a recent discovery.
- True width approximation disclosed.
- Robust QA/QC procedures and QP sign-off.
Negative factors
- Grade is very low for silver, indicating it's not a primary economic driver for this interval.
- Cut-off grade for compositing is not explicitly stated.
Evidence · table
“0.50”
Context: 1
WR-26-020goldGrade: 1.68Grade Unit: g/t AuEqIntercept: 1 mView all detailsHide details
Identity
- Hole ID
- WR-26-020
- Commodity
- gold
- Ticker
- TLG
Geometry
- Grade
- 1.68
- Grade Unit
- g/t AuEq
- Intercept
- 1 m
- From
- 63 m
- To
- 64 m
Classification
- Deposit Type
- vms
- Program
- exploration
- Sample Type
- drill
- Group ID
- WR-26-020:63.0-64.0
- Mining Method
- mixed
QA/QC
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Metal Equivalent
- Metal Eq. Grade
- 1.68
- Metal Eq. Unit
- g/t AuEq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-05-19T00:00:00.000Z
Reasoning: This sub-interval shows a strong gold equivalent grade, highlighting a high-grade core within the broader intercept, despite its narrow width. The metal equivalent calculation is transparent.
Positive factors
- Strong gold equivalent grade (1.68 g/t AuEq) for a VMS deposit, indicating a high-grade zone.
- New drill intercept from an exploration program expanding a recent discovery.
- True width approximation disclosed.
- Metal equivalent assumptions are disclosed.
- Robust QA/QC procedures and QP sign-off.
Negative factors
- Narrow intercept length (1m).
- Cut-off grade for compositing is not explicitly stated.
Evidence · table
“1.68”
Context: 1
WR-26-022goldGrade: 0.48Grade Unit: g/tIntercept: 18 mView all detailsHide details
Identity
- Hole ID
- WR-26-022
- Commodity
- gold
- Ticker
- TLG
Geometry
- Grade
- 0.48
- Grade Unit
- g/t
- Intercept
- 18 m
- From
- 9 m
- To
- 27 m
Classification
- Deposit Type
- vms
- Program
- exploration
- Sample Type
- drill
- Group ID
- WR-26-022:9.0-27.0
- Mining Method
- mixed
QA/QC
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Metal Equivalent
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-05-19T00:00:00.000Z
Reasoning: This intercept shows a moderate gold grade over a strong width, contributing to the overall understanding and expansion of the West Rim discovery. The GT product (8.64 g/t·m) is weak.
Positive factors
- Moderate gold grade for a VMS deposit over a strong width (18m).
- New drill intercept from an exploration program expanding a recent discovery.
- True width approximation disclosed.
- Robust QA/QC procedures and QP sign-off.
Negative factors
- Cut-off grade for compositing is not explicitly stated.
Evidence · table
“0.48”
Context: 18
WR-26-022copperGrade: 0.01Grade Unit: %Intercept: 18 mView all detailsHide details
Identity
- Hole ID
- WR-26-022
- Commodity
- copper
- Ticker
- TLG
Geometry
- Grade
- 0.01
- Grade Unit
- %
- Intercept
- 18 m
- From
- 9 m
- To
- 27 m
Classification
- Deposit Type
- vms
- Program
- exploration
- Sample Type
- drill
- Group ID
- WR-26-022:9.0-27.0
- Mining Method
- mixed
QA/QC
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Metal Equivalent
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-05-19T00:00:00.000Z
Reasoning: This intercept shows a very low copper grade, contributing to the polymetallic nature but not as a significant value driver for this specific interval.
Positive factors
- New drill intercept from an exploration program expanding a recent discovery.
- True width approximation disclosed.
- Robust QA/QC procedures and QP sign-off.
Negative factors
- Grade is very low for copper, indicating it's not a primary economic driver for this interval.
- Cut-off grade for compositing is not explicitly stated.
Evidence · table
“0.01”
Context: 18
WR-26-022silverGrade: 1Grade Unit: g/tIntercept: 18 mView all detailsHide details
Identity
- Hole ID
- WR-26-022
- Commodity
- silver
- Ticker
- TLG
Geometry
- Grade
- 1
- Grade Unit
- g/t
- Intercept
- 18 m
- From
- 9 m
- To
- 27 m
Classification
- Deposit Type
- vms
- Program
- exploration
- Sample Type
- drill
- Group ID
- WR-26-022:9.0-27.0
- Mining Method
- mixed
QA/QC
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Metal Equivalent
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-05-19T00:00:00.000Z
Reasoning: This intercept shows a very low silver grade, contributing to the polymetallic nature but not as a significant value driver for this specific interval.
Positive factors
- New drill intercept from an exploration program expanding a recent discovery.
- True width approximation disclosed.
- Robust QA/QC procedures and QP sign-off.
Negative factors
- Grade is very low for silver, indicating it's not a primary economic driver for this interval.
- Cut-off grade for compositing is not explicitly stated.
Evidence · table
“1.00”
Context: 18
WR-26-022goldGrade: 0.5Grade Unit: g/t AuEqIntercept: 18 mView all detailsHide details
Identity
- Hole ID
- WR-26-022
- Commodity
- gold
- Ticker
- TLG
Geometry
- Grade
- 0.5
- Grade Unit
- g/t AuEq
- Intercept
- 18 m
- From
- 9 m
- To
- 27 m
Classification
- Deposit Type
- vms
- Program
- exploration
- Sample Type
- drill
- Group ID
- WR-26-022:9.0-27.0
- Mining Method
- mixed
QA/QC
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Metal Equivalent
- Metal Eq. Grade
- 0.5
- Metal Eq. Unit
- g/t AuEq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-05-19T00:00:00.000Z
Reasoning: This intercept shows a moderate gold equivalent grade over a strong width, contributing to the overall understanding and expansion of the West Rim discovery. The metal equivalent calculation is transparent.
Positive factors
- Moderate gold equivalent grade (0.5 g/t AuEq) over a strong width (18m) for a VMS deposit.
- New drill intercept from an exploration program expanding a recent discovery.
- True width approximation disclosed.
- Metal equivalent assumptions are disclosed.
- Robust QA/QC procedures and QP sign-off.
Negative factors
- Cut-off grade for compositing is not explicitly stated.
Evidence · table
“0.50”
Context: 18
WR-26-022goldGrade: 1.32Grade Unit: g/tIntercept: 1 mView all detailsHide details
Identity
- Hole ID
- WR-26-022
- Commodity
- gold
- Ticker
- TLG
Geometry
- Grade
- 1.32
- Grade Unit
- g/t
- Intercept
- 1 m
- From
- 15 m
- To
- 16 m
Classification
- Deposit Type
- vms
- Program
- exploration
- Sample Type
- drill
- Group ID
- WR-26-022:15.0-16.0
- Mining Method
- mixed
QA/QC
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Metal Equivalent
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-05-19T00:00:00.000Z
Reasoning: This sub-interval shows a strong gold grade, highlighting a high-grade core within the broader intercept, despite its narrow width. The GT product (1.32 g/t·m) is weak.
Positive factors
- Strong gold grade (1.32 g/t) for a VMS deposit, indicating a high-grade zone.
- New drill intercept from an exploration program expanding a recent discovery.
- True width approximation disclosed.
- Robust QA/QC procedures and QP sign-off.
Negative factors
- Narrow intercept length (1m).
- Cut-off grade for compositing is not explicitly stated.
Evidence · table
“1.32”
Context: 1
WR-26-022copperGrade: 0Grade Unit: %Intercept: 1 mView all detailsHide details
Identity
- Hole ID
- WR-26-022
- Commodity
- copper
- Ticker
- TLG
Geometry
- Grade
- 0
- Grade Unit
- %
- Intercept
- 1 m
- From
- 15 m
- To
- 16 m
Classification
- Deposit Type
- vms
- Program
- exploration
- Sample Type
- drill
- Group ID
- WR-26-022:15.0-16.0
- Mining Method
- mixed
QA/QC
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Metal Equivalent
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-05-19T00:00:00.000Z
Reasoning: This sub-interval shows no copper grade, indicating no contribution from this metal for this specific interval.
Positive factors
- New drill intercept from an exploration program expanding a recent discovery.
- True width approximation disclosed.
- Robust QA/QC procedures and QP sign-off.
Negative factors
- Grade is zero for copper, indicating no contribution from this metal for this interval.
- Cut-off grade for compositing is not explicitly stated.
Evidence · table
“0.00”
Context: 1
WR-26-022silverGrade: 1Grade Unit: g/tIntercept: 1 mView all detailsHide details
Identity
- Hole ID
- WR-26-022
- Commodity
- silver
- Ticker
- TLG
Geometry
- Grade
- 1
- Grade Unit
- g/t
- Intercept
- 1 m
- From
- 15 m
- To
- 16 m
Classification
- Deposit Type
- vms
- Program
- exploration
- Sample Type
- drill
- Group ID
- WR-26-022:15.0-16.0
- Mining Method
- mixed
QA/QC
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Metal Equivalent
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-05-19T00:00:00.000Z
Reasoning: This sub-interval shows a very low silver grade, contributing to the polymetallic nature but not as a significant value driver for this specific interval.
Positive factors
- New drill intercept from an exploration program expanding a recent discovery.
- True width approximation disclosed.
- Robust QA/QC procedures and QP sign-off.
Negative factors
- Grade is very low for silver, indicating it's not a primary economic driver for this interval.
- Cut-off grade for compositing is not explicitly stated.
Evidence · table
“1.00”
Context: 1
WR-26-022goldGrade: 1.34Grade Unit: g/t AuEqIntercept: 1 mView all detailsHide details
Identity
- Hole ID
- WR-26-022
- Commodity
- gold
- Ticker
- TLG
Geometry
- Grade
- 1.34
- Grade Unit
- g/t AuEq
- Intercept
- 1 m
- From
- 15 m
- To
- 16 m
Classification
- Deposit Type
- vms
- Program
- exploration
- Sample Type
- drill
- Group ID
- WR-26-022:15.0-16.0
- Mining Method
- mixed
QA/QC
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Metal Equivalent
- Metal Eq. Grade
- 1.34
- Metal Eq. Unit
- g/t AuEq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-05-19T00:00:00.000Z
Reasoning: This sub-interval shows a strong gold equivalent grade, highlighting a high-grade core within the broader intercept, despite its narrow width. The metal equivalent calculation is transparent.
Positive factors
- Strong gold equivalent grade (1.34 g/t AuEq) for a VMS deposit, indicating a high-grade zone.
- New drill intercept from an exploration program expanding a recent discovery.
- True width approximation disclosed.
- Metal equivalent assumptions are disclosed.
- Robust QA/QC procedures and QP sign-off.
Negative factors
- Narrow intercept length (1m).
- Cut-off grade for compositing is not explicitly stated.
Evidence · table
“1.34”
Context: 1
WR-26-022goldGrade: 5.25Grade Unit: g/tIntercept: 1 mView all detailsHide details
Identity
- Hole ID
- WR-26-022
- Commodity
- gold
- Ticker
- TLG
Geometry
- Grade
- 5.25
- Grade Unit
- g/t
- Intercept
- 1 m
- From
- 26 m
- To
- 27 m
Classification
- Deposit Type
- vms
- Program
- exploration
- Sample Type
- drill
- Group ID
- WR-26-022:26.0-27.0
- Mining Method
- mixed
QA/QC
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Metal Equivalent
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-05-19T00:00:00.000Z
Reasoning: This sub-interval shows an exceptional gold grade, highlighting a high-grade core within the broader intercept, despite its narrow width. The GT product (5.25 g/t·m) is weak.
Positive factors
- Exceptional gold grade (5.25 g/t) for a VMS deposit, indicating a high-grade zone.
- New drill intercept from an exploration program expanding a recent discovery.
- True width approximation disclosed.
- Robust QA/QC procedures and QP sign-off.
Negative factors
- Narrow intercept length (1m).
- Cut-off grade for compositing is not explicitly stated.
Evidence · table
“5.25”
Context: 1
WR-26-022copperGrade: 0.03Grade Unit: %Intercept: 1 mView all detailsHide details
Identity
- Hole ID
- WR-26-022
- Commodity
- copper
- Ticker
- TLG
Geometry
- Grade
- 0.03
- Grade Unit
- %
- Intercept
- 1 m
- From
- 26 m
- To
- 27 m
Classification
- Deposit Type
- vms
- Program
- exploration
- Sample Type
- drill
- Group ID
- WR-26-022:26.0-27.0
- Mining Method
- mixed
QA/QC
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Metal Equivalent
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-05-19T00:00:00.000Z
Reasoning: This sub-interval shows a very low copper grade, contributing to the polymetallic nature but not as a significant value driver for this specific interval.
Positive factors
- New drill intercept from an exploration program expanding a recent discovery.
- True width approximation disclosed.
- Robust QA/QC procedures and QP sign-off.
Negative factors
- Grade is very low for copper, indicating it's not a primary economic driver for this interval.
- Cut-off grade for compositing is not explicitly stated.
Evidence · table
“0.03”
Context: 1
WR-26-022silverGrade: 2.2Grade Unit: g/tIntercept: 1 mView all detailsHide details
Identity
- Hole ID
- WR-26-022
- Commodity
- silver
- Ticker
- TLG
Geometry
- Grade
- 2.2
- Grade Unit
- g/t
- Intercept
- 1 m
- From
- 26 m
- To
- 27 m
Classification
- Deposit Type
- vms
- Program
- exploration
- Sample Type
- drill
- Group ID
- WR-26-022:26.0-27.0
- Mining Method
- mixed
QA/QC
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Metal Equivalent
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-05-19T00:00:00.000Z
Reasoning: This sub-interval shows a very low silver grade, contributing to the polymetallic nature but not as a significant value driver for this specific interval.
Positive factors
- New drill intercept from an exploration program expanding a recent discovery.
- True width approximation disclosed.
- Robust QA/QC procedures and QP sign-off.
Negative factors
- Grade is very low for silver, indicating it's not a primary economic driver for this interval.
- Cut-off grade for compositing is not explicitly stated.
Evidence · table
“2.20”
Context: 1
WR-26-022goldGrade: 5.32Grade Unit: g/t AuEqIntercept: 1 mView all detailsHide details
Identity
- Hole ID
- WR-26-022
- Commodity
- gold
- Ticker
- TLG
Geometry
- Grade
- 5.32
- Grade Unit
- g/t AuEq
- Intercept
- 1 m
- From
- 26 m
- To
- 27 m
Classification
- Deposit Type
- vms
- Program
- exploration
- Sample Type
- drill
- Group ID
- WR-26-022:26.0-27.0
- Mining Method
- mixed
QA/QC
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Metal Equivalent
- Metal Eq. Grade
- 5.32
- Metal Eq. Unit
- g/t AuEq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-05-19T00:00:00.000Z
Reasoning: This sub-interval shows an exceptional gold equivalent grade, highlighting a high-grade core within the broader intercept, despite its narrow width. The metal equivalent calculation is transparent.
Positive factors
- Exceptional gold equivalent grade (5.32 g/t AuEq) for a VMS deposit, indicating a high-grade zone.
- New drill intercept from an exploration program expanding a recent discovery.
- True width approximation disclosed.
- Metal equivalent assumptions are disclosed.
- Robust QA/QC procedures and QP sign-off.
Negative factors
- Narrow intercept length (1m).
- Cut-off grade for compositing is not explicitly stated.
Evidence · table
“5.32”
Context: 1
WR-26-023goldGrade: 0.68Grade Unit: g/tIntercept: 26 mView all detailsHide details
Identity
- Hole ID
- WR-26-023
- Commodity
- gold
- Ticker
- TLG
Geometry
- Grade
- 0.68
- Grade Unit
- g/t
- Intercept
- 26 m
- From
- 16 m
- To
- 42 m
Classification
- Deposit Type
- vms
- Program
- exploration
- Sample Type
- drill
- Group ID
- WR-26-023:16.0-42.0
- Mining Method
- mixed
QA/QC
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Metal Equivalent
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-05-19T00:00:00.000Z
Reasoning: This intercept shows a moderate gold grade over a strong width, contributing to the overall understanding and expansion of the West Rim discovery. The GT product (17.68 g/t·m) is weak.
Positive factors
- Moderate gold grade for a VMS deposit over a strong width (26m).
- New drill intercept from an exploration program expanding a recent discovery.
- True width approximation disclosed.
- Robust QA/QC procedures and QP sign-off.
Negative factors
- Cut-off grade for compositing is not explicitly stated.
Evidence · table
“0.68”
Context: 26
WR-26-023copperGrade: 0.01Grade Unit: %Intercept: 26 mView all detailsHide details
Identity
- Hole ID
- WR-26-023
- Commodity
- copper
- Ticker
- TLG
Geometry
- Grade
- 0.01
- Grade Unit
- %
- Intercept
- 26 m
- From
- 16 m
- To
- 42 m
Classification
- Deposit Type
- vms
- Program
- exploration
- Sample Type
- drill
- Group ID
- WR-26-023:16.0-42.0
- Mining Method
- mixed
QA/QC
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Metal Equivalent
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-05-19T00:00:00.000Z
Reasoning: This intercept shows a very low copper grade, contributing to the polymetallic nature but not as a significant value driver for this specific interval.
Positive factors
- New drill intercept from an exploration program expanding a recent discovery.
- True width approximation disclosed.
- Robust QA/QC procedures and QP sign-off.
Negative factors
- Grade is very low for copper, indicating it's not a primary economic driver for this interval.
- Cut-off grade for compositing is not explicitly stated.
Evidence · table
“0.01”
Context: 26
WR-26-023silverGrade: 1.7Grade Unit: g/tIntercept: 26 mView all detailsHide details
Identity
- Hole ID
- WR-26-023
- Commodity
- silver
- Ticker
- TLG
Geometry
- Grade
- 1.7
- Grade Unit
- g/t
- Intercept
- 26 m
- From
- 16 m
- To
- 42 m
Classification
- Deposit Type
- vms
- Program
- exploration
- Sample Type
- drill
- Group ID
- WR-26-023:16.0-42.0
- Mining Method
- mixed
QA/QC
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Metal Equivalent
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-05-19T00:00:00.000Z
Reasoning: This intercept shows a very low silver grade, contributing to the polymetallic nature but not as a significant value driver for this specific interval.
Positive factors
- New drill intercept from an exploration program expanding a recent discovery.
- True width approximation disclosed.
- Robust QA/QC procedures and QP sign-off.
Negative factors
- Grade is very low for silver, indicating it's not a primary economic driver for this interval.
- Cut-off grade for compositing is not explicitly stated.
Evidence · table
“1.70”
Context: 26
WR-26-023goldGrade: 0.71Grade Unit: g/t AuEqIntercept: 26 mHistorical resultNeeds review: historical_restatementView all detailsHide details
Identity
- Hole ID
- WR-26-023
- Commodity
- gold
- Ticker
- TLG
Geometry
- Grade
- 0.71
- Grade Unit
- g/t AuEq
- Intercept
- 26 m
- From
- 16 m
- To
- 42 m
Classification
- Deposit Type
- vms
- Program
- exploration
- Sample Type
- drill
- Group ID
- WR-26-023:16.0-42.0
- Mining Method
- mixed
QA/QC
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Metal Equivalent
- Metal Eq. Grade
- 0.71
- Metal Eq. Unit
- g/t AuEq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- Yes
- Review Reason
- historical_restatement
- Interp. Status
- scored
- Historical
- Yes
Dates
- Event date
- 2026-05-19T00:00:00.000Z
Reasoning: This intercept shows a moderate gold equivalent grade over a strong width, contributing to the overall understanding and expansion of the West Rim discovery. The metal equivalent calculation is transparent.
Positive factors
- Moderate gold equivalent grade (0.71 g/t AuEq) over a strong width (26m) for a VMS deposit.
- New drill intercept from an exploration program expanding a recent discovery.
- True width approximation disclosed.
- Metal equivalent assumptions are disclosed.
- Robust QA/QC procedures and QP sign-off.
Negative factors
- Cut-off grade for compositing is not explicitly stated.
Evidence · table
“0.71”
Context: 26
WR-26-023goldGrade: 4.39Grade Unit: g/tIntercept: 1 mView all detailsHide details
Identity
- Hole ID
- WR-26-023
- Commodity
- gold
- Ticker
- TLG
Geometry
- Grade
- 4.39
- Grade Unit
- g/t
- Intercept
- 1 m
- From
- 19 m
- To
- 20 m
Classification
- Deposit Type
- vms
- Program
- exploration
- Sample Type
- drill
- Group ID
- WR-26-023:19.0-20.0
- Mining Method
- mixed
QA/QC
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Metal Equivalent
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-05-19T00:00:00.000Z
Reasoning: This sub-interval shows a strong gold grade, highlighting a high-grade core within the broader intercept, despite its narrow width. The GT product (4.39 g/t·m) is weak.
Positive factors
- Strong gold grade (4.39 g/t) for a VMS deposit, indicating a high-grade zone.
- New drill intercept from an exploration program expanding a recent discovery.
- True width approximation disclosed.
- Robust QA/QC procedures and QP sign-off.
Negative factors
- Narrow intercept length (1m).
- Cut-off grade for compositing is not explicitly stated.
Evidence · table
“4.39”
Context: 1
WR-26-023copperGrade: 0.02Grade Unit: %Intercept: 1 mView all detailsHide details
Identity
- Hole ID
- WR-26-023
- Commodity
- copper
- Ticker
- TLG
Geometry
- Grade
- 0.02
- Grade Unit
- %
- Intercept
- 1 m
- From
- 19 m
- To
- 20 m
Classification
- Deposit Type
- vms
- Program
- exploration
- Sample Type
- drill
- Group ID
- WR-26-023:19.0-20.0
- Mining Method
- mixed
QA/QC
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Metal Equivalent
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-05-19T00:00:00.000Z
Reasoning: This sub-interval shows a very low copper grade, contributing to the polymetallic nature but not as a significant value driver for this specific interval.
Positive factors
- New drill intercept from an exploration program expanding a recent discovery.
- True width approximation disclosed.
- Robust QA/QC procedures and QP sign-off.
Negative factors
- Grade is very low for copper, indicating it's not a primary economic driver for this interval.
- Cut-off grade for compositing is not explicitly stated.
Evidence · table
“0.02”
Context: 1
WR-26-023silverGrade: 1.5Grade Unit: g/tIntercept: 1 mView all detailsHide details
Identity
- Hole ID
- WR-26-023
- Commodity
- silver
- Ticker
- TLG
Geometry
- Grade
- 1.5
- Grade Unit
- g/t
- Intercept
- 1 m
- From
- 19 m
- To
- 20 m
Classification
- Deposit Type
- vms
- Program
- exploration
- Sample Type
- drill
- Group ID
- WR-26-023:19.0-20.0
- Mining Method
- mixed
QA/QC
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Metal Equivalent
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-05-19T00:00:00.000Z
Reasoning: This sub-interval shows a very low silver grade, contributing to the polymetallic nature but not as a significant value driver for this specific interval.
Positive factors
- New drill intercept from an exploration program expanding a recent discovery.
- True width approximation disclosed.
- Robust QA/QC procedures and QP sign-off.
Negative factors
- Grade is very low for silver, indicating it's not a primary economic driver for this interval.
- Cut-off grade for compositing is not explicitly stated.
Evidence · table
“1.50”
Context: 1
WR-26-023goldGrade: 4.43Grade Unit: g/t AuEqIntercept: 1 mView all detailsHide details
Identity
- Hole ID
- WR-26-023
- Commodity
- gold
- Ticker
- TLG
Geometry
- Grade
- 4.43
- Grade Unit
- g/t AuEq
- Intercept
- 1 m
- From
- 19 m
- To
- 20 m
Classification
- Deposit Type
- vms
- Program
- exploration
- Sample Type
- drill
- Group ID
- WR-26-023:19.0-20.0
- Mining Method
- mixed
QA/QC
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Metal Equivalent
- Metal Eq. Grade
- 4.43
- Metal Eq. Unit
- g/t AuEq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-05-19T00:00:00.000Z
Reasoning: This sub-interval shows a strong gold equivalent grade, highlighting a high-grade core within the broader intercept, despite its narrow width. The metal equivalent calculation is transparent.
Positive factors
- Strong gold equivalent grade (4.43 g/t AuEq) for a VMS deposit, indicating a high-grade zone.
- New drill intercept from an exploration program expanding a recent discovery.
- True width approximation disclosed.
- Metal equivalent assumptions are disclosed.
- Robust QA/QC procedures and QP sign-off.
Negative factors
- Narrow intercept length (1m).
- Cut-off grade for compositing is not explicitly stated.
Evidence · table
“4.43”
Context: 1
WR-26-023goldGrade: 2.48Grade Unit: g/tIntercept: 4 mView all detailsHide details
Identity
- Hole ID
- WR-26-023
- Commodity
- gold
- Ticker
- TLG
Geometry
- Grade
- 2.48
- Grade Unit
- g/t
- Intercept
- 4 m
- From
- 38 m
- To
- 42 m
Classification
- Deposit Type
- vms
- Program
- exploration
- Sample Type
- drill
- Group ID
- WR-26-023:38.0-42.0
- Mining Method
- mixed
QA/QC
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Metal Equivalent
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-05-19T00:00:00.000Z
Reasoning: This sub-interval shows a strong gold grade over a narrow width, representing a high-grade component within the broader intercept. The GT product (9.92 g/t·m) is weak.
Positive factors
- Strong gold grade (2.48 g/t) over a narrow width (4m) for a VMS deposit, indicating a high-grade zone.
- New drill intercept from an exploration program expanding a recent discovery.
- True width approximation disclosed.
- Robust QA/QC procedures and QP sign-off.
Negative factors
- Cut-off grade for compositing is not explicitly stated.
Evidence · table
“2.48”
Context: 4
WR-26-023copperGrade: 0.01Grade Unit: %Intercept: 4 mView all detailsHide details
Identity
- Hole ID
- WR-26-023
- Commodity
- copper
- Ticker
- TLG
Geometry
- Grade
- 0.01
- Grade Unit
- %
- Intercept
- 4 m
- From
- 38 m
- To
- 42 m
Classification
- Deposit Type
- vms
- Program
- exploration
- Sample Type
- drill
- Group ID
- WR-26-023:38.0-42.0
- Mining Method
- mixed
QA/QC
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Metal Equivalent
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-05-19T00:00:00.000Z
Reasoning: This sub-interval shows a very low copper grade, contributing to the polymetallic nature but not as a significant value driver for this specific interval.
Positive factors
- New drill intercept from an exploration program expanding a recent discovery.
- True width approximation disclosed.
- Robust QA/QC procedures and QP sign-off.
Negative factors
- Grade is very low for copper, indicating it's not a primary economic driver for this interval.
- Cut-off grade for compositing is not explicitly stated.
Evidence · table
“0.01”
Context: 4
WR-26-023silverGrade: 3.98Grade Unit: g/tIntercept: 4 mView all detailsHide details
Identity
- Hole ID
- WR-26-023
- Commodity
- silver
- Ticker
- TLG
Geometry
- Grade
- 3.98
- Grade Unit
- g/t
- Intercept
- 4 m
- From
- 38 m
- To
- 42 m
Classification
- Deposit Type
- vms
- Program
- exploration
- Sample Type
- drill
- Group ID
- WR-26-023:38.0-42.0
- Mining Method
- mixed
QA/QC
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Metal Equivalent
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-05-19T00:00:00.000Z
Reasoning: This sub-interval shows a low silver grade, contributing to the polymetallic nature but not as a significant value driver for this specific interval.
Positive factors
- New drill intercept from an exploration program expanding a recent discovery.
- True width approximation disclosed.
- Robust QA/QC procedures and QP sign-off.
Negative factors
- Grade is low for silver, indicating it's not a primary economic driver for this interval.
- Cut-off grade for compositing is not explicitly stated.
Evidence · table
“3.98”
Context: 4
WR-26-023goldGrade: 2.54Grade Unit: g/t AuEqIntercept: 4 mHistorical resultNeeds review: historical_restatementView all detailsHide details
Identity
- Hole ID
- WR-26-023
- Commodity
- gold
- Ticker
- TLG
Geometry
- Grade
- 2.54
- Grade Unit
- g/t AuEq
- Intercept
- 4 m
- From
- 38 m
- To
- 42 m
Classification
- Deposit Type
- vms
- Program
- exploration
- Sample Type
- drill
- Group ID
- WR-26-023:38.0-42.0
- Mining Method
- mixed
QA/QC
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Metal Equivalent
- Metal Eq. Grade
- 2.54
- Metal Eq. Unit
- g/t AuEq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- Yes
- Review Reason
- historical_restatement
- Interp. Status
- scored
- Historical
- Yes
Dates
- Event date
- 2026-05-19T00:00:00.000Z
Reasoning: This sub-interval shows a strong gold equivalent grade over a narrow width, representing a high-grade component within the broader intercept. The metal equivalent calculation is transparent.
Positive factors
- Strong gold equivalent grade (2.54 g/t AuEq) over a narrow width (4m) for a VMS deposit, indicating a high-grade zone.
- New drill intercept from an exploration program expanding a recent discovery.
- True width approximation disclosed.
- Metal equivalent assumptions are disclosed.
- Robust QA/QC procedures and QP sign-off.
Negative factors
- Cut-off grade for compositing is not explicitly stated.
Evidence · table
“2.54”
Context: 4
How Atlas produces this analysis
Minestarters Atlas uses automated extraction to summarize mining announcements, identify reported measurements, and classify supporting evidence. Sentiment reflects the extracted narrative and classification rules; it is an interpretation, not a reported measurement. Evidence quotes and context are provided where available. Missing data, low-confidence results, and review flags indicate limitations. Check the original publisher announcement before relying on an interpretation.