Troilus Drills 1.15 g/t AuEQ Over 37 m, Including 3.84 g/t AuEQ Over 5 m, at Connector Zone, Extending High-Grade Mineralization Within Current Mine Plan Area
Original announcement by tmx on
- Company
- Troilus Mining Corp.
- Ticker
- TLG
- Exchange
- TSX
- Region
- Quebec, Canada
- Primary commodity
- Gold
- Secondary commodities
- Silver, Copper
- Document categories
- Drill results, Resource update
- Extracted
- 2026-08-22 14:45:03 UTC
Analysis by Minestarters Atlas
Minestarters Atlas analysis
Summary
Troilus Mining Corp. announced encouraging drill results from its Connector Zone, including a highlight intercept of 1.15 g/t AuEq over 37 metres, with a higher-grade section of 3.84 g/t AuEq over 5 metres. These results are part of an ongoing exploration program aimed at optimizing the mine plan by extending high-grade mineralization and converting inferred resources to indicated within the current reserve pit areas. The company expects these results to support future mine planning, including pit sequencing and strip ratio optimization for its large-scale open-pit operation in Quebec, Canada.
Reasoning: The drill results from the Connector Zone, including 1.15 g/t AuEq over 37 m and 3.84 g/t AuEq over 5 m, demonstrate high-grade mineralization and continuity within the current mine plan area. This drilling is specifically designed to convert inferred resources to indicated, which is critical for optimizing future mine planning, reducing strip ratio, and improving early-year mill feed for the large-scale open-pit operation. The company has provided detailed QA/QC and metal equivalent assumptions, enhancing confidence in the results.
Positive factors
- High-grade intercepts
- Resource conversion potential
- Mine plan optimization
- Good QA/QC
- True width disclosed
- QP/CP Signed
- Metal equivalent assumptions disclosed
Rubric flags
- RAG comparison for drill grades not applicable due to commodity mismatch. — RAG context for gold equivalent grades or gold/copper grades separately would be more appropriate.
Facts used in scoring: 62
Classification and evidence
Category Upgradepositive
Resource confidence improved — Inferred upgraded to Indicated, or Indicated to Measured. De-risking signal.
Why it applies: The drill program was designed to support the conversion of inferred material within the pit areas to the indicated category.
Evidence · text
“support the conversion of inferred material within the pit areas to the indicated category”
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: The release details a strict QA/QC program, including certified standards, blank samples, and assay procedures by a certified laboratory.
Evidence · text
“A strict QA/QC program was applied to all samples; which included insertion of one certified mineralized standard and one blank sample in each batch of 25 samples.”
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: The document states that true thicknesses are approximately 75% to 90% of drilled length.
Evidence · text
“true thicknesses are approximately 75% to 90% of drilled length”
QP/CP Signedpositive
Qualified Person (QP) or Competent Person (CP) named and signed off — a member of a recognized professional association (e.g., AusIMM, SME, AIG, P.Geo) with relevant experience.
Why it applies: Nicolas Guest, P.Geo., Exploration Manager, is named as the Qualified Person who reviewed and approved the technical information.
Evidence · text
“Nicolas Guest, P.Geo., Exploration Manager, who is a Qualified Person as defined by NI 43-101.”
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: The drill program targeted inferred mineralization within the reserve pit areas, which is characteristic of infill drilling to raise resource confidence.
Evidence · text
“targeting inferred mineralization within the reserve pit areas”
Resource Updateneutral
Revised estimate for an existing resource — compare to prior to assess progress.
Why it applies: The program was designed to support mine plan optimization and resource conversion, indicating an update to the existing resource model.
Evidence · text
“support mine plan optimization by targeting inferred mineralization within the reserve pit areas and testing up-plunge extensions of previously identified high-grade trends”
Extracted facts
Stored fact records: 62. Some facts used in scoring do not have a stored record.
Drill Results (62)
J-26-349goldGrade: 0.48Grade Unit: g/t AuEqIntercept: 5 mView all detailsHide details
Identity
- Hole ID
- J-26-349
- Commodity
- gold
- Ticker
- TLG
Geometry
- Grade
- 0.48
- Grade Unit
- g/t AuEq
- Intercept
- 5 m
- From
- 12 m
- To
- 17 m
Classification
- Program
- resource
- Group ID
- J-26-349:12.0-17.0
- Mining Method
- open_pit
Location
- Dip
- -55 °
QA/QC
- Laboratory
- ALS Laboratory
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Metal Equivalent
- Metal Eq. Grade
- 0.48
- Metal Eq. Unit
- g/t AuEq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-06-16T00:00:00.000Z
Reasoning: This intercept of 0.48 g/t AuEq over 5 m is a moderate grade for an open-pit gold equivalent project, contributing to resource conversion efforts within the mine plan area. True width is estimated at 75-90% of drilled length.
Positive factors
- Resource conversion potential
- Mine plan optimization
- Good QA/QC
- True width disclosed
- QP/CP Signed
- Metal equivalent assumptions disclosed
Evidence · table
“0.48”
Context: 5
J-26-349goldGrade: 0.54Grade Unit: g/t AuEqIntercept: 10 mView all detailsHide details
Identity
- Hole ID
- J-26-349
- Commodity
- gold
- Ticker
- TLG
Geometry
- Grade
- 0.54
- Grade Unit
- g/t AuEq
- Intercept
- 10 m
- From
- 25 m
- To
- 35 m
Classification
- Program
- resource
- Group ID
- J-26-349:25.0-35.0
- Mining Method
- open_pit
Location
- Dip
- -55 °
QA/QC
- Laboratory
- ALS Laboratory
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Metal Equivalent
- Metal Eq. Grade
- 0.54
- Metal Eq. Unit
- g/t AuEq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-06-16T00:00:00.000Z
Reasoning: This intercept of 0.54 g/t AuEq over 10 m is a moderate grade for an open-pit gold equivalent project, contributing to resource conversion efforts within the mine plan area. True width is estimated at 75-90% of drilled length.
Positive factors
- Resource conversion potential
- Mine plan optimization
- Good QA/QC
- True width disclosed
- QP/CP Signed
- Metal equivalent assumptions disclosed
Evidence · table
“0.54”
Context: 10
J-26-349goldGrade: 0.75Grade Unit: g/t AuEqIntercept: 35 mView all detailsHide details
Identity
- Hole ID
- J-26-349
- Commodity
- gold
- Ticker
- TLG
Geometry
- Grade
- 0.75
- Grade Unit
- g/t AuEq
- Intercept
- 35 m
- From
- 58 m
- To
- 93 m
Classification
- Program
- resource
- Group ID
- J-26-349:58.0-93.0
- Mining Method
- open_pit
Location
- Dip
- -55 °
QA/QC
- Laboratory
- ALS Laboratory
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Metal Equivalent
- Metal Eq. Grade
- 0.75
- Metal Eq. Unit
- g/t AuEq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-06-16T00:00:00.000Z
Reasoning: This intercept of 0.75 g/t AuEq over 35 m is a moderate grade for an open-pit gold equivalent project, contributing to resource conversion efforts within the mine plan area. True width is estimated at 75-90% of drilled length.
Positive factors
- Resource conversion potential
- Mine plan optimization
- Good QA/QC
- True width disclosed
- QP/CP Signed
- Metal equivalent assumptions disclosed
Evidence · table
“0.75”
Context: 35
J-26-349goldGrade: 1.93Grade Unit: g/t AuEqIntercept: 7 mView all detailsHide details
Identity
- Hole ID
- J-26-349
- Commodity
- gold
- Ticker
- TLG
Geometry
- Grade
- 1.93
- Grade Unit
- g/t AuEq
- Intercept
- 7 m
- From
- 69 m
- To
- 76 m
Classification
- Program
- resource
- Group ID
- J-26-349:69.0-76.0
- Mining Method
- open_pit
Location
- Dip
- -55 °
QA/QC
- Laboratory
- ALS Laboratory
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Metal Equivalent
- Metal Eq. Grade
- 1.93
- Metal Eq. Unit
- g/t AuEq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-06-16T00:00:00.000Z
Reasoning: This intercept of 1.93 g/t AuEq over 7 m is a strong grade for an open-pit gold equivalent project, contributing to resource conversion efforts within the mine plan area. True width is estimated at 75-90% of drilled length.
Positive factors
- High-grade intercepts
- Resource conversion potential
- Mine plan optimization
- Good QA/QC
- True width disclosed
- QP/CP Signed
- Metal equivalent assumptions disclosed
Evidence · table
“1.93”
Context: 7
J-26-350goldGrade: 0.21Grade Unit: g/t AuEqIntercept: 14 mView all detailsHide details
Identity
- Hole ID
- J-26-350
- Commodity
- gold
- Ticker
- TLG
Geometry
- Grade
- 0.21
- Grade Unit
- g/t AuEq
- Intercept
- 14 m
- From
- 52 m
- To
- 66 m
Classification
- Program
- resource
- Group ID
- J-26-350:52.0-66.0
- Mining Method
- open_pit
Location
- Dip
- -55 °
QA/QC
- Laboratory
- ALS Laboratory
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Metal Equivalent
- Metal Eq. Grade
- 0.21
- Metal Eq. Unit
- g/t AuEq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-06-16T00:00:00.000Z
Reasoning: This intercept of 0.21 g/t AuEq over 14 m is a weak grade for an open-pit gold equivalent project, contributing to resource conversion efforts within the mine plan area. True width is estimated at 75-90% of drilled length.
Positive factors
- Resource conversion potential
- Mine plan optimization
- Good QA/QC
- True width disclosed
- QP/CP Signed
- Metal equivalent assumptions disclosed
Evidence · table
“0.21”
Context: 14
J-26-350goldGrade: 0.33Grade Unit: g/t AuEqIntercept: 9 mView all detailsHide details
Identity
- Hole ID
- J-26-350
- Commodity
- gold
- Ticker
- TLG
Geometry
- Grade
- 0.33
- Grade Unit
- g/t AuEq
- Intercept
- 9 m
- From
- 92 m
- To
- 101 m
Classification
- Program
- resource
- Group ID
- J-26-350:92.0-101.0
- Mining Method
- open_pit
Location
- Dip
- -55 °
QA/QC
- Laboratory
- ALS Laboratory
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Metal Equivalent
- Metal Eq. Grade
- 0.33
- Metal Eq. Unit
- g/t AuEq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-06-16T00:00:00.000Z
Reasoning: This intercept of 0.33 g/t AuEq over 9 m is a weak grade for an open-pit gold equivalent project, contributing to resource conversion efforts within the mine plan area. True width is estimated at 75-90% of drilled length.
Positive factors
- Resource conversion potential
- Mine plan optimization
- Good QA/QC
- True width disclosed
- QP/CP Signed
- Metal equivalent assumptions disclosed
Evidence · table
“0.33”
Context: 9
J-26-350goldGrade: 0.62Grade Unit: g/t AuEqIntercept: 11.5 mView all detailsHide details
Identity
- Hole ID
- J-26-350
- Commodity
- gold
- Ticker
- TLG
Geometry
- Grade
- 0.62
- Grade Unit
- g/t AuEq
- Intercept
- 11.5 m
- From
- 114.5 m
- To
- 126 m
Classification
- Program
- resource
- Group ID
- J-26-350:114.5-126.0
- Mining Method
- open_pit
Location
- Dip
- -55 °
QA/QC
- Laboratory
- ALS Laboratory
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Metal Equivalent
- Metal Eq. Grade
- 0.62
- Metal Eq. Unit
- g/t AuEq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-06-16T00:00:00.000Z
Reasoning: This intercept of 0.62 g/t AuEq over 11.5 m is a moderate grade for an open-pit gold equivalent project, contributing to resource conversion efforts within the mine plan area. True width is estimated at 75-90% of drilled length.
Positive factors
- Resource conversion potential
- Mine plan optimization
- Good QA/QC
- True width disclosed
- QP/CP Signed
- Metal equivalent assumptions disclosed
Evidence · table
“0.62”
Context: 11.5
J-26-350goldGrade: 0.36Grade Unit: g/t AuEqIntercept: 6 mView all detailsHide details
Identity
- Hole ID
- J-26-350
- Commodity
- gold
- Ticker
- TLG
Geometry
- Grade
- 0.36
- Grade Unit
- g/t AuEq
- Intercept
- 6 m
- From
- 135 m
- To
- 141 m
Classification
- Program
- resource
- Group ID
- J-26-350:135.0-141.0
- Mining Method
- open_pit
Location
- Dip
- -55 °
QA/QC
- Laboratory
- ALS Laboratory
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Metal Equivalent
- Metal Eq. Grade
- 0.36
- Metal Eq. Unit
- g/t AuEq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-06-16T00:00:00.000Z
Reasoning: This intercept of 0.36 g/t AuEq over 6 m is a weak grade for an open-pit gold equivalent project, contributing to resource conversion efforts within the mine plan area. True width is estimated at 75-90% of drilled length.
Positive factors
- Resource conversion potential
- Mine plan optimization
- Good QA/QC
- True width disclosed
- QP/CP Signed
- Metal equivalent assumptions disclosed
Evidence · table
“0.36”
Context: 6
J-26-351goldGrade: 1.23Grade Unit: g/t AuEqIntercept: 28.7 mView all detailsHide details
Identity
- Hole ID
- J-26-351
- Commodity
- gold
- Ticker
- TLG
Geometry
- Grade
- 1.23
- Grade Unit
- g/t AuEq
- Intercept
- 28.7 m
- From
- 26.3 m
- To
- 55 m
Classification
- Program
- resource
- Group ID
- J-26-351:26.3-55.0
- Mining Method
- open_pit
Location
- Dip
- -55 °
QA/QC
- Laboratory
- ALS Laboratory
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Metal Equivalent
- Metal Eq. Grade
- 1.23
- Metal Eq. Unit
- g/t AuEq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-06-16T00:00:00.000Z
Reasoning: This intercept of 1.23 g/t AuEq over 28.7 m is a strong grade for an open-pit gold equivalent project, contributing to resource conversion efforts within the mine plan area. True width is estimated at 75-90% of drilled length.
Positive factors
- High-grade intercepts
- Resource conversion potential
- Mine plan optimization
- Good QA/QC
- True width disclosed
- QP/CP Signed
- Metal equivalent assumptions disclosed
Evidence · table
“1.23”
Context: 28.7
J-26-351goldGrade: 25.53Grade Unit: g/t AuEqIntercept: 1 mView all detailsHide details
Identity
- Hole ID
- J-26-351
- Commodity
- gold
- Ticker
- TLG
Geometry
- Grade
- 25.53
- Grade Unit
- g/t AuEq
- Intercept
- 1 m
- From
- 32 m
- To
- 33 m
Classification
- Program
- resource
- Group ID
- J-26-351:32.0-33.0
- Mining Method
- open_pit
Location
- Dip
- -55 °
QA/QC
- Laboratory
- ALS Laboratory
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Metal Equivalent
- Metal Eq. Grade
- 25.53
- Metal Eq. Unit
- g/t AuEq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-06-16T00:00:00.000Z
Reasoning: This intercept of 25.53 g/t AuEq over 1 m is an exceptional grade for an open-pit gold equivalent project, contributing to resource conversion efforts within the mine plan area. True width is estimated at 75-90% of drilled length.
Positive factors
- Bonanza Intercept
- Resource conversion potential
- Mine plan optimization
- Good QA/QC
- True width disclosed
- QP/CP Signed
- Metal equivalent assumptions disclosed
Evidence · table
“25.53”
Context: 1
J-26-351goldGrade: 4.78Grade Unit: g/t AuEqIntercept: 1 mView all detailsHide details
Identity
- Hole ID
- J-26-351
- Commodity
- gold
- Ticker
- TLG
Geometry
- Grade
- 4.78
- Grade Unit
- g/t AuEq
- Intercept
- 1 m
- From
- 41.5 m
- To
- 42.5 m
Classification
- Program
- resource
- Group ID
- J-26-351:41.5-42.5
- Mining Method
- open_pit
Location
- Dip
- -55 °
QA/QC
- Laboratory
- ALS Laboratory
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Metal Equivalent
- Metal Eq. Grade
- 4.78
- Metal Eq. Unit
- g/t AuEq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-06-16T00:00:00.000Z
Reasoning: This intercept of 4.78 g/t AuEq over 1 m is an exceptional grade for an open-pit gold equivalent project, contributing to resource conversion efforts within the mine plan area. True width is estimated at 75-90% of drilled length.
Positive factors
- High-grade intercepts
- Resource conversion potential
- Mine plan optimization
- Good QA/QC
- True width disclosed
- QP/CP Signed
- Metal equivalent assumptions disclosed
Evidence · table
“4.78”
Context: 1
J-26-352goldGrade: 0.37Grade Unit: g/t AuEqIntercept: 5 mView all detailsHide details
Identity
- Hole ID
- J-26-352
- Commodity
- gold
- Ticker
- TLG
Geometry
- Grade
- 0.37
- Grade Unit
- g/t AuEq
- Intercept
- 5 m
- From
- 37 m
- To
- 42 m
Classification
- Program
- resource
- Group ID
- J-26-352:37.0-42.0
- Mining Method
- open_pit
Location
- Dip
- -55 °
QA/QC
- Laboratory
- ALS Laboratory
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Metal Equivalent
- Metal Eq. Grade
- 0.37
- Metal Eq. Unit
- g/t AuEq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-06-16T00:00:00.000Z
Reasoning: This intercept of 0.37 g/t AuEq over 5 m is a weak grade for an open-pit gold equivalent project, contributing to resource conversion efforts within the mine plan area. True width is estimated at 75-90% of drilled length.
Positive factors
- Resource conversion potential
- Mine plan optimization
- Good QA/QC
- True width disclosed
- QP/CP Signed
- Metal equivalent assumptions disclosed
Evidence · table
“0.37”
Context: 5
J-26-352goldGrade: 0.24Grade Unit: g/t AuEqIntercept: 11.7 mView all detailsHide details
Identity
- Hole ID
- J-26-352
- Commodity
- gold
- Ticker
- TLG
Geometry
- Grade
- 0.24
- Grade Unit
- g/t AuEq
- Intercept
- 11.7 m
- From
- 51.4 m
- To
- 63.1 m
Classification
- Program
- resource
- Group ID
- J-26-352:51.4-63.1
- Mining Method
- open_pit
Location
- Dip
- -55 °
QA/QC
- Laboratory
- ALS Laboratory
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Metal Equivalent
- Metal Eq. Grade
- 0.24
- Metal Eq. Unit
- g/t AuEq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-06-16T00:00:00.000Z
Reasoning: This intercept of 0.24 g/t AuEq over 11.7 m is a weak grade for an open-pit gold equivalent project, contributing to resource conversion efforts within the mine plan area. True width is estimated at 75-90% of drilled length.
Positive factors
- Resource conversion potential
- Mine plan optimization
- Good QA/QC
- True width disclosed
- QP/CP Signed
- Metal equivalent assumptions disclosed
Evidence · table
“0.24”
Context: 11.7
J-26-352goldGrade: 0.72Grade Unit: g/t AuEqIntercept: 21 mView all detailsHide details
Identity
- Hole ID
- J-26-352
- Commodity
- gold
- Ticker
- TLG
Geometry
- Grade
- 0.72
- Grade Unit
- g/t AuEq
- Intercept
- 21 m
- From
- 73 m
- To
- 94 m
Classification
- Program
- resource
- Group ID
- J-26-352:73.0-94.0
- Mining Method
- open_pit
Location
- Dip
- -55 °
QA/QC
- Laboratory
- ALS Laboratory
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Metal Equivalent
- Metal Eq. Grade
- 0.72
- Metal Eq. Unit
- g/t AuEq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-06-16T00:00:00.000Z
Reasoning: This intercept of 0.72 g/t AuEq over 21 m is a moderate grade for an open-pit gold equivalent project, contributing to resource conversion efforts within the mine plan area. True width is estimated at 75-90% of drilled length.
Positive factors
- Resource conversion potential
- Mine plan optimization
- Good QA/QC
- True width disclosed
- QP/CP Signed
- Metal equivalent assumptions disclosed
Evidence · table
“0.72”
Context: 21
J-26-352goldGrade: 2.42Grade Unit: g/t AuEqIntercept: 4.4 mView all detailsHide details
Identity
- Hole ID
- J-26-352
- Commodity
- gold
- Ticker
- TLG
Geometry
- Grade
- 2.42
- Grade Unit
- g/t AuEq
- Intercept
- 4.4 m
- From
- 77.6 m
- To
- 82 m
Classification
- Program
- resource
- Group ID
- J-26-352:77.6-82.0
- Mining Method
- open_pit
Location
- Dip
- -55 °
QA/QC
- Laboratory
- ALS Laboratory
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Metal Equivalent
- Metal Eq. Grade
- 2.42
- Metal Eq. Unit
- g/t AuEq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-06-16T00:00:00.000Z
Reasoning: This intercept of 2.42 g/t AuEq over 4.4 m is a strong grade for an open-pit gold equivalent project, contributing to resource conversion efforts within the mine plan area. True width is estimated at 75-90% of drilled length.
Positive factors
- High-grade intercepts
- Resource conversion potential
- Mine plan optimization
- Good QA/QC
- True width disclosed
- QP/CP Signed
- Metal equivalent assumptions disclosed
Evidence · table
“2.42”
Context: 4.4
J-26-353goldGrade: 0.28Grade Unit: g/t AuEqIntercept: 17 mView all detailsHide details
Identity
- Hole ID
- J-26-353
- Commodity
- gold
- Ticker
- TLG
Geometry
- Grade
- 0.28
- Grade Unit
- g/t AuEq
- Intercept
- 17 m
- From
- 19 m
- To
- 36 m
Classification
- Program
- resource
- Group ID
- J-26-353:19.0-36.0
- Mining Method
- open_pit
Location
- Dip
- -45 °
QA/QC
- Laboratory
- ALS Laboratory
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Metal Equivalent
- Metal Eq. Grade
- 0.28
- Metal Eq. Unit
- g/t AuEq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-06-16T00:00:00.000Z
Reasoning: This intercept of 0.28 g/t AuEq over 17 m is a weak grade for an open-pit gold equivalent project, contributing to resource conversion efforts within the mine plan area. True width is estimated at 75-90% of drilled length.
Positive factors
- Resource conversion potential
- Mine plan optimization
- Good QA/QC
- True width disclosed
- QP/CP Signed
- Metal equivalent assumptions disclosed
Evidence · table
“0.28”
Context: 17
J-26-353goldGrade: 1.23Grade Unit: g/t AuEqIntercept: 1 mView all detailsHide details
Identity
- Hole ID
- J-26-353
- Commodity
- gold
- Ticker
- TLG
Geometry
- Grade
- 1.23
- Grade Unit
- g/t AuEq
- Intercept
- 1 m
- From
- 72 m
- To
- 73 m
Classification
- Program
- resource
- Group ID
- J-26-353:72.0-73.0
- Mining Method
- open_pit
Location
- Dip
- -45 °
QA/QC
- Laboratory
- ALS Laboratory
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Metal Equivalent
- Metal Eq. Grade
- 1.23
- Metal Eq. Unit
- g/t AuEq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-06-16T00:00:00.000Z
Reasoning: This intercept of 1.23 g/t AuEq over 1 m is a strong grade for an open-pit gold equivalent project, contributing to resource conversion efforts within the mine plan area. True width is estimated at 75-90% of drilled length.
Positive factors
- High-grade intercepts
- Resource conversion potential
- Mine plan optimization
- Good QA/QC
- True width disclosed
- QP/CP Signed
- Metal equivalent assumptions disclosed
Evidence · table
“1.23”
Context: 1
J-26-353goldGrade: 0.23Grade Unit: g/t AuEqIntercept: 7 mView all detailsHide details
Identity
- Hole ID
- J-26-353
- Commodity
- gold
- Ticker
- TLG
Geometry
- Grade
- 0.23
- Grade Unit
- g/t AuEq
- Intercept
- 7 m
- From
- 219 m
- To
- 226 m
Classification
- Program
- resource
- Group ID
- J-26-353:219.0-226.0
- Mining Method
- open_pit
Location
- Dip
- -45 °
QA/QC
- Laboratory
- ALS Laboratory
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Metal Equivalent
- Metal Eq. Grade
- 0.23
- Metal Eq. Unit
- g/t AuEq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-06-16T00:00:00.000Z
Reasoning: This intercept of 0.23 g/t AuEq over 7 m is a weak grade for an open-pit gold equivalent project, contributing to resource conversion efforts within the mine plan area. True width is estimated at 75-90% of drilled length.
Positive factors
- Resource conversion potential
- Mine plan optimization
- Good QA/QC
- True width disclosed
- QP/CP Signed
- Metal equivalent assumptions disclosed
Evidence · table
“0.23”
Context: 7
J-26-353goldGrade: 0.25Grade Unit: g/t AuEqIntercept: 7 mView all detailsHide details
Identity
- Hole ID
- J-26-353
- Commodity
- gold
- Ticker
- TLG
Geometry
- Grade
- 0.25
- Grade Unit
- g/t AuEq
- Intercept
- 7 m
- From
- 233 m
- To
- 240 m
Classification
- Program
- resource
- Group ID
- J-26-353:233.0-240.0
- Mining Method
- open_pit
Location
- Dip
- -45 °
QA/QC
- Laboratory
- ALS Laboratory
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Metal Equivalent
- Metal Eq. Grade
- 0.25
- Metal Eq. Unit
- g/t AuEq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-06-16T00:00:00.000Z
Reasoning: This intercept of 0.25 g/t AuEq over 7 m is a weak grade for an open-pit gold equivalent project, contributing to resource conversion efforts within the mine plan area. True width is estimated at 75-90% of drilled length.
Positive factors
- Resource conversion potential
- Mine plan optimization
- Good QA/QC
- True width disclosed
- QP/CP Signed
- Metal equivalent assumptions disclosed
Evidence · table
“0.25”
Context: 7
J-26-353goldGrade: 0.62Grade Unit: g/t AuEqIntercept: 15 mView all detailsHide details
Identity
- Hole ID
- J-26-353
- Commodity
- gold
- Ticker
- TLG
Geometry
- Grade
- 0.62
- Grade Unit
- g/t AuEq
- Intercept
- 15 m
- From
- 270 m
- To
- 285 m
Classification
- Program
- resource
- Group ID
- J-26-353:270.0-285.0
- Mining Method
- open_pit
Location
- Dip
- -45 °
QA/QC
- Laboratory
- ALS Laboratory
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Metal Equivalent
- Metal Eq. Grade
- 0.62
- Metal Eq. Unit
- g/t AuEq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-06-16T00:00:00.000Z
Reasoning: This intercept of 0.62 g/t AuEq over 15 m is a moderate grade for an open-pit gold equivalent project, contributing to resource conversion efforts within the mine plan area. True width is estimated at 75-90% of drilled length.
Positive factors
- Resource conversion potential
- Mine plan optimization
- Good QA/QC
- True width disclosed
- QP/CP Signed
- Metal equivalent assumptions disclosed
Evidence · table
“0.62”
Context: 15
J-26-353goldGrade: 0.4Grade Unit: g/t AuEqIntercept: 3 mView all detailsHide details
Identity
- Hole ID
- J-26-353
- Commodity
- gold
- Ticker
- TLG
Geometry
- Grade
- 0.4
- Grade Unit
- g/t AuEq
- Intercept
- 3 m
- From
- 295 m
- To
- 298 m
Classification
- Program
- resource
- Group ID
- J-26-353:295.0-298.0
- Mining Method
- open_pit
Location
- Dip
- -45 °
QA/QC
- Laboratory
- ALS Laboratory
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Metal Equivalent
- Metal Eq. Grade
- 0.4
- Metal Eq. Unit
- g/t AuEq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-06-16T00:00:00.000Z
Reasoning: This intercept of 0.4 g/t AuEq over 3 m is a weak grade for an open-pit gold equivalent project, contributing to resource conversion efforts within the mine plan area. True width is estimated at 75-90% of drilled length.
Positive factors
- Resource conversion potential
- Mine plan optimization
- Good QA/QC
- True width disclosed
- QP/CP Signed
- Metal equivalent assumptions disclosed
Evidence · table
“0.40”
Context: 3
J-26-354goldGrade: 0.27Grade Unit: g/t AuEqIntercept: 7.7 mView all detailsHide details
Identity
- Hole ID
- J-26-354
- Commodity
- gold
- Ticker
- TLG
Geometry
- Grade
- 0.27
- Grade Unit
- g/t AuEq
- Intercept
- 7.7 m
- From
- 41.3 m
- To
- 49 m
Classification
- Program
- resource
- Group ID
- J-26-354:41.3-49.0
- Mining Method
- open_pit
Location
- Dip
- -55 °
QA/QC
- Laboratory
- ALS Laboratory
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Metal Equivalent
- Metal Eq. Grade
- 0.27
- Metal Eq. Unit
- g/t AuEq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-06-16T00:00:00.000Z
Reasoning: This intercept of 0.27 g/t AuEq over 7.7 m is a weak grade for an open-pit gold equivalent project, contributing to resource conversion efforts within the mine plan area. True width is estimated at 75-90% of drilled length.
Positive factors
- Resource conversion potential
- Mine plan optimization
- Good QA/QC
- True width disclosed
- QP/CP Signed
- Metal equivalent assumptions disclosed
Evidence · table
“0.27”
Context: 7.7
J-26-354goldGrade: 0.33Grade Unit: g/t AuEqIntercept: 41 mView all detailsHide details
Identity
- Hole ID
- J-26-354
- Commodity
- gold
- Ticker
- TLG
Geometry
- Grade
- 0.33
- Grade Unit
- g/t AuEq
- Intercept
- 41 m
- From
- 95 m
- To
- 136 m
Classification
- Program
- resource
- Group ID
- J-26-354:95.0-136.0
- Mining Method
- open_pit
Location
- Dip
- -55 °
QA/QC
- Laboratory
- ALS Laboratory
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Metal Equivalent
- Metal Eq. Grade
- 0.33
- Metal Eq. Unit
- g/t AuEq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-06-16T00:00:00.000Z
Reasoning: This intercept of 0.33 g/t AuEq over 41 m is a weak grade for an open-pit gold equivalent project, contributing to resource conversion efforts within the mine plan area. True width is estimated at 75-90% of drilled length.
Positive factors
- Resource conversion potential
- Mine plan optimization
- Good QA/QC
- True width disclosed
- QP/CP Signed
- Metal equivalent assumptions disclosed
Evidence · table
“0.33”
Context: 41
J-26-354goldGrade: 0.5Grade Unit: g/t AuEqIntercept: 5 mView all detailsHide details
Identity
- Hole ID
- J-26-354
- Commodity
- gold
- Ticker
- TLG
Geometry
- Grade
- 0.5
- Grade Unit
- g/t AuEq
- Intercept
- 5 m
- From
- 155 m
- To
- 160 m
Classification
- Program
- resource
- Group ID
- J-26-354:155.0-160.0
- Mining Method
- open_pit
Location
- Dip
- -55 °
QA/QC
- Laboratory
- ALS Laboratory
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Metal Equivalent
- Metal Eq. Grade
- 0.5
- Metal Eq. Unit
- g/t AuEq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-06-16T00:00:00.000Z
Reasoning: This intercept of 0.5 g/t AuEq over 5 m is a moderate grade for an open-pit gold equivalent project, contributing to resource conversion efforts within the mine plan area. True width is estimated at 75-90% of drilled length.
Positive factors
- Resource conversion potential
- Mine plan optimization
- Good QA/QC
- True width disclosed
- QP/CP Signed
- Metal equivalent assumptions disclosed
Evidence · table
“0.50”
Context: 5
J-26-354goldGrade: 0.38Grade Unit: g/t AuEqIntercept: 25 mView all detailsHide details
Identity
- Hole ID
- J-26-354
- Commodity
- gold
- Ticker
- TLG
Geometry
- Grade
- 0.38
- Grade Unit
- g/t AuEq
- Intercept
- 25 m
- From
- 177 m
- To
- 202 m
Classification
- Program
- resource
- Group ID
- J-26-354:177.0-202.0
- Mining Method
- open_pit
Location
- Dip
- -55 °
QA/QC
- Laboratory
- ALS Laboratory
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Metal Equivalent
- Metal Eq. Grade
- 0.38
- Metal Eq. Unit
- g/t AuEq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-06-16T00:00:00.000Z
Reasoning: This intercept of 0.38 g/t AuEq over 25 m is a weak grade for an open-pit gold equivalent project, contributing to resource conversion efforts within the mine plan area. True width is estimated at 75-90% of drilled length.
Positive factors
- Resource conversion potential
- Mine plan optimization
- Good QA/QC
- True width disclosed
- QP/CP Signed
- Metal equivalent assumptions disclosed
Evidence · table
“0.38”
Context: 25
J-26-354goldGrade: 2.51Grade Unit: g/t AuEqIntercept: 0.5 mView all detailsHide details
Identity
- Hole ID
- J-26-354
- Commodity
- gold
- Ticker
- TLG
Geometry
- Grade
- 2.51
- Grade Unit
- g/t AuEq
- Intercept
- 0.5 m
- From
- 217 m
- To
- 217.5 m
Classification
- Program
- resource
- Group ID
- J-26-354:217.0-217.5
- Mining Method
- open_pit
Location
- Dip
- -55 °
QA/QC
- Laboratory
- ALS Laboratory
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Metal Equivalent
- Metal Eq. Grade
- 2.51
- Metal Eq. Unit
- g/t AuEq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-06-16T00:00:00.000Z
Reasoning: This intercept of 2.51 g/t AuEq over 0.5 m is a strong grade for an open-pit gold equivalent project, contributing to resource conversion efforts within the mine plan area. True width is estimated at 75-90% of drilled length.
Positive factors
- High-grade intercepts
- Resource conversion potential
- Mine plan optimization
- Good QA/QC
- True width disclosed
- QP/CP Signed
- Metal equivalent assumptions disclosed
Evidence · table
“2.51”
Context: 0.5
J-26-354goldGrade: 1.18Grade Unit: g/t AuEqIntercept: 1.3 mView all detailsHide details
Identity
- Hole ID
- J-26-354
- Commodity
- gold
- Ticker
- TLG
Geometry
- Grade
- 1.18
- Grade Unit
- g/t AuEq
- Intercept
- 1.3 m
- From
- 257.6 m
- To
- 258.9 m
Classification
- Program
- resource
- Group ID
- J-26-354:257.6-258.9
- Mining Method
- open_pit
Location
- Dip
- -55 °
QA/QC
- Laboratory
- ALS Laboratory
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Metal Equivalent
- Metal Eq. Grade
- 1.18
- Metal Eq. Unit
- g/t AuEq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-06-16T00:00:00.000Z
Reasoning: This intercept of 1.18 g/t AuEq over 1.3 m is a strong grade for an open-pit gold equivalent project, contributing to resource conversion efforts within the mine plan area. True width is estimated at 75-90% of drilled length.
Positive factors
- High-grade intercepts
- Resource conversion potential
- Mine plan optimization
- Good QA/QC
- True width disclosed
- QP/CP Signed
- Metal equivalent assumptions disclosed
Evidence · table
“1.18”
Context: 1.3
J-26-355goldGrade: 0.24Grade Unit: g/t AuEqIntercept: 28.1 mView all detailsHide details
Identity
- Hole ID
- J-26-355
- Commodity
- gold
- Ticker
- TLG
Geometry
- Grade
- 0.24
- Grade Unit
- g/t AuEq
- Intercept
- 28.1 m
- From
- 50.9 m
- To
- 79 m
Classification
- Program
- resource
- Group ID
- J-26-355:50.9-79.0
- Mining Method
- open_pit
Location
- Dip
- -55 °
QA/QC
- Laboratory
- ALS Laboratory
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Metal Equivalent
- Metal Eq. Grade
- 0.24
- Metal Eq. Unit
- g/t AuEq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-06-16T00:00:00.000Z
Reasoning: This intercept of 0.24 g/t AuEq over 28.1 m is a weak grade for an open-pit gold equivalent project, contributing to resource conversion efforts within the mine plan area. True width is estimated at 75-90% of drilled length.
Positive factors
- Resource conversion potential
- Mine plan optimization
- Good QA/QC
- True width disclosed
- QP/CP Signed
- Metal equivalent assumptions disclosed
Evidence · table
“0.24”
Context: 28.1
J-26-355goldGrade: 0.66Grade Unit: g/t AuEqIntercept: 5.8 mView all detailsHide details
Identity
- Hole ID
- J-26-355
- Commodity
- gold
- Ticker
- TLG
Geometry
- Grade
- 0.66
- Grade Unit
- g/t AuEq
- Intercept
- 5.8 m
- From
- 88 m
- To
- 93.8 m
Classification
- Program
- resource
- Group ID
- J-26-355:88.0-93.8
- Mining Method
- open_pit
Location
- Dip
- -55 °
QA/QC
- Laboratory
- ALS Laboratory
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Metal Equivalent
- Metal Eq. Grade
- 0.66
- Metal Eq. Unit
- g/t AuEq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-06-16T00:00:00.000Z
Reasoning: This intercept of 0.66 g/t AuEq over 5.8 m is a moderate grade for an open-pit gold equivalent project, contributing to resource conversion efforts within the mine plan area. True width is estimated at 75-90% of drilled length.
Positive factors
- Resource conversion potential
- Mine plan optimization
- Good QA/QC
- True width disclosed
- QP/CP Signed
- Metal equivalent assumptions disclosed
Evidence · table
“0.66”
Context: 5.8
J-26-355goldGrade: 0.46Grade Unit: g/t AuEqIntercept: 19 mView all detailsHide details
Identity
- Hole ID
- J-26-355
- Commodity
- gold
- Ticker
- TLG
Geometry
- Grade
- 0.46
- Grade Unit
- g/t AuEq
- Intercept
- 19 m
- From
- 103 m
- To
- 122 m
Classification
- Program
- resource
- Group ID
- J-26-355:103.0-122.0
- Mining Method
- open_pit
Location
- Dip
- -55 °
QA/QC
- Laboratory
- ALS Laboratory
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Metal Equivalent
- Metal Eq. Grade
- 0.46
- Metal Eq. Unit
- g/t AuEq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-06-16T00:00:00.000Z
Reasoning: This intercept of 0.46 g/t AuEq over 19 m is a moderate grade for an open-pit gold equivalent project, contributing to resource conversion efforts within the mine plan area. True width is estimated at 75-90% of drilled length.
Positive factors
- Resource conversion potential
- Mine plan optimization
- Good QA/QC
- True width disclosed
- QP/CP Signed
- Metal equivalent assumptions disclosed
Evidence · table
“0.46”
Context: 19
J-26-355goldGrade: 3.12Grade Unit: g/t AuEqIntercept: 1 mView all detailsHide details
Identity
- Hole ID
- J-26-355
- Commodity
- gold
- Ticker
- TLG
Geometry
- Grade
- 3.12
- Grade Unit
- g/t AuEq
- Intercept
- 1 m
- From
- 119 m
- To
- 120 m
Classification
- Program
- resource
- Group ID
- J-26-355:119.0-120.0
- Mining Method
- open_pit
Location
- Dip
- -55 °
QA/QC
- Laboratory
- ALS Laboratory
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Metal Equivalent
- Metal Eq. Grade
- 3.12
- Metal Eq. Unit
- g/t AuEq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-06-16T00:00:00.000Z
Reasoning: This intercept of 3.12 g/t AuEq over 1 m is an exceptional grade for an open-pit gold equivalent project, contributing to resource conversion efforts within the mine plan area. True width is estimated at 75-90% of drilled length.
Positive factors
- High-grade intercepts
- Resource conversion potential
- Mine plan optimization
- Good QA/QC
- True width disclosed
- QP/CP Signed
- Metal equivalent assumptions disclosed
Evidence · table
“3.12”
Context: 1
J-26-355goldGrade: 0.27Grade Unit: g/t AuEqIntercept: 6.6 mView all detailsHide details
Identity
- Hole ID
- J-26-355
- Commodity
- gold
- Ticker
- TLG
Geometry
- Grade
- 0.27
- Grade Unit
- g/t AuEq
- Intercept
- 6.6 m
- From
- 127.4 m
- To
- 134 m
Classification
- Program
- resource
- Group ID
- J-26-355:127.4-134.0
- Mining Method
- open_pit
Location
- Dip
- -55 °
QA/QC
- Laboratory
- ALS Laboratory
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Metal Equivalent
- Metal Eq. Grade
- 0.27
- Metal Eq. Unit
- g/t AuEq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-06-16T00:00:00.000Z
Reasoning: This intercept of 0.27 g/t AuEq over 6.6 m is a weak grade for an open-pit gold equivalent project, contributing to resource conversion efforts within the mine plan area. True width is estimated at 75-90% of drilled length.
Positive factors
- Resource conversion potential
- Mine plan optimization
- Good QA/QC
- True width disclosed
- QP/CP Signed
- Metal equivalent assumptions disclosed
Evidence · table
“0.27”
Context: 6.6
J-26-356goldGrade: 0.61Grade Unit: g/t AuEqIntercept: 7.1 mView all detailsHide details
Identity
- Hole ID
- J-26-356
- Commodity
- gold
- Ticker
- TLG
Geometry
- Grade
- 0.61
- Grade Unit
- g/t AuEq
- Intercept
- 7.1 m
- From
- 19 m
- To
- 26.1 m
Classification
- Program
- resource
- Group ID
- J-26-356:19.0-26.1
- Mining Method
- open_pit
Location
- Dip
- -55 °
QA/QC
- Laboratory
- ALS Laboratory
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Metal Equivalent
- Metal Eq. Grade
- 0.61
- Metal Eq. Unit
- g/t AuEq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-06-16T00:00:00.000Z
Reasoning: This intercept of 0.61 g/t AuEq over 7.1 m is a moderate grade for an open-pit gold equivalent project, contributing to resource conversion efforts within the mine plan area. True width is estimated at 75-90% of drilled length.
Positive factors
- Resource conversion potential
- Mine plan optimization
- Good QA/QC
- True width disclosed
- QP/CP Signed
- Metal equivalent assumptions disclosed
Evidence · table
“0.61”
Context: 7.1
J-26-357goldGrade: 0.3Grade Unit: g/t AuEqIntercept: 16 mView all detailsHide details
Identity
- Hole ID
- J-26-357
- Commodity
- gold
- Ticker
- TLG
Geometry
- Grade
- 0.3
- Grade Unit
- g/t AuEq
- Intercept
- 16 m
- From
- 32 m
- To
- 48 m
Classification
- Program
- resource
- Group ID
- J-26-357:32.0-48.0
- Mining Method
- open_pit
Location
- Dip
- -55 °
QA/QC
- Laboratory
- ALS Laboratory
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Metal Equivalent
- Metal Eq. Grade
- 0.3
- Metal Eq. Unit
- g/t AuEq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-06-16T00:00:00.000Z
Reasoning: This intercept of 0.3 g/t AuEq over 16 m is a weak grade for an open-pit gold equivalent project, contributing to resource conversion efforts within the mine plan area. True width is estimated at 75-90% of drilled length.
Positive factors
- Resource conversion potential
- Mine plan optimization
- Good QA/QC
- True width disclosed
- QP/CP Signed
- Metal equivalent assumptions disclosed
Evidence · table
“0.30”
Context: 16
J-26-357goldGrade: 3.1Grade Unit: g/t AuEqIntercept: 0.5 mView all detailsHide details
Identity
- Hole ID
- J-26-357
- Commodity
- gold
- Ticker
- TLG
Geometry
- Grade
- 3.1
- Grade Unit
- g/t AuEq
- Intercept
- 0.5 m
- From
- 62.7 m
- To
- 63.2 m
Classification
- Program
- resource
- Group ID
- J-26-357:62.7-63.2
- Mining Method
- open_pit
Location
- Dip
- -55 °
QA/QC
- Laboratory
- ALS Laboratory
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Metal Equivalent
- Metal Eq. Grade
- 3.1
- Metal Eq. Unit
- g/t AuEq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-06-16T00:00:00.000Z
Reasoning: This intercept of 3.1 g/t AuEq over 0.5 m is an exceptional grade for an open-pit gold equivalent project, contributing to resource conversion efforts within the mine plan area. True width is estimated at 75-90% of drilled length.
Positive factors
- High-grade intercepts
- Resource conversion potential
- Mine plan optimization
- Good QA/QC
- True width disclosed
- QP/CP Signed
- Metal equivalent assumptions disclosed
Evidence · table
“3.10”
Context: 0.5
J-26-357goldGrade: 0.5Grade Unit: g/t AuEqIntercept: 10.2 mView all detailsHide details
Identity
- Hole ID
- J-26-357
- Commodity
- gold
- Ticker
- TLG
Geometry
- Grade
- 0.5
- Grade Unit
- g/t AuEq
- Intercept
- 10.2 m
- From
- 82 m
- To
- 92.2 m
Classification
- Program
- resource
- Group ID
- J-26-357:82.0-92.2
- Mining Method
- open_pit
Location
- Dip
- -55 °
QA/QC
- Laboratory
- ALS Laboratory
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Metal Equivalent
- Metal Eq. Grade
- 0.5
- Metal Eq. Unit
- g/t AuEq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-06-16T00:00:00.000Z
Reasoning: This intercept of 0.5 g/t AuEq over 10.2 m is a moderate grade for an open-pit gold equivalent project, contributing to resource conversion efforts within the mine plan area. True width is estimated at 75-90% of drilled length.
Positive factors
- Resource conversion potential
- Mine plan optimization
- Good QA/QC
- True width disclosed
- QP/CP Signed
- Metal equivalent assumptions disclosed
Evidence · table
“0.50”
Context: 10.2
J-26-357goldGrade: 3.34Grade Unit: g/t AuEqIntercept: 6.6 mView all detailsHide details
Identity
- Hole ID
- J-26-357
- Commodity
- gold
- Ticker
- TLG
Geometry
- Grade
- 3.34
- Grade Unit
- g/t AuEq
- Intercept
- 6.6 m
- From
- 160 m
- To
- 166.55 m
Classification
- Program
- resource
- Group ID
- J-26-357:160.0-166.55
- Mining Method
- open_pit
Location
- Dip
- -55 °
QA/QC
- Laboratory
- ALS Laboratory
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Metal Equivalent
- Metal Eq. Grade
- 3.34
- Metal Eq. Unit
- g/t AuEq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-06-16T00:00:00.000Z
Reasoning: This intercept of 3.34 g/t AuEq over 6.6 m is an exceptional grade for an open-pit gold equivalent project, contributing to resource conversion efforts within the mine plan area. True width is estimated at 75-90% of drilled length.
Positive factors
- High-grade intercepts
- Resource conversion potential
- Mine plan optimization
- Good QA/QC
- True width disclosed
- QP/CP Signed
- Metal equivalent assumptions disclosed
Evidence · table
“3.34”
Context: 6.6
J-26-357goldGrade: 14.69Grade Unit: g/t AuEqIntercept: 1.4 mView all detailsHide details
Identity
- Hole ID
- J-26-357
- Commodity
- gold
- Ticker
- TLG
Geometry
- Grade
- 14.69
- Grade Unit
- g/t AuEq
- Intercept
- 1.4 m
- From
- 165.2 m
- To
- 166.55 m
Classification
- Program
- resource
- Group ID
- J-26-357:165.2-166.55
- Mining Method
- open_pit
Location
- Dip
- -55 °
QA/QC
- Laboratory
- ALS Laboratory
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Metal Equivalent
- Metal Eq. Grade
- 14.69
- Metal Eq. Unit
- g/t AuEq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-06-16T00:00:00.000Z
Reasoning: This intercept of 14.69 g/t AuEq over 1.4 m is an exceptional grade for an open-pit gold equivalent project, contributing to resource conversion efforts within the mine plan area. True width is estimated at 75-90% of drilled length.
Positive factors
- Bonanza Intercept
- Resource conversion potential
- Mine plan optimization
- Good QA/QC
- True width disclosed
- QP/CP Signed
- Metal equivalent assumptions disclosed
Evidence · table
“14.69”
Context: 1.4
J-26-357goldGrade: 1.73Grade Unit: g/t AuEqIntercept: 4 mView all detailsHide details
Identity
- Hole ID
- J-26-357
- Commodity
- gold
- Ticker
- TLG
Geometry
- Grade
- 1.73
- Grade Unit
- g/t AuEq
- Intercept
- 4 m
- From
- 200 m
- To
- 204 m
Classification
- Program
- resource
- Group ID
- J-26-357:200.0-204.0
- Mining Method
- open_pit
Location
- Dip
- -55 °
QA/QC
- Laboratory
- ALS Laboratory
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Metal Equivalent
- Metal Eq. Grade
- 1.73
- Metal Eq. Unit
- g/t AuEq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-06-16T00:00:00.000Z
Reasoning: This intercept of 1.73 g/t AuEq over 4 m is a strong grade for an open-pit gold equivalent project, contributing to resource conversion efforts within the mine plan area. True width is estimated at 75-90% of drilled length.
Positive factors
- High-grade intercepts
- Resource conversion potential
- Mine plan optimization
- Good QA/QC
- True width disclosed
- QP/CP Signed
- Metal equivalent assumptions disclosed
Evidence · table
“1.73”
Context: 4
J-26-357goldGrade: 6.17Grade Unit: g/t AuEqIntercept: 1 mView all detailsHide details
Identity
- Hole ID
- J-26-357
- Commodity
- gold
- Ticker
- TLG
Geometry
- Grade
- 6.17
- Grade Unit
- g/t AuEq
- Intercept
- 1 m
- From
- 202 m
- To
- 203 m
Classification
- Program
- resource
- Group ID
- J-26-357:202.0-203.0
- Mining Method
- open_pit
Location
- Dip
- -55 °
QA/QC
- Laboratory
- ALS Laboratory
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Metal Equivalent
- Metal Eq. Grade
- 6.17
- Metal Eq. Unit
- g/t AuEq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-06-16T00:00:00.000Z
Reasoning: This intercept of 6.17 g/t AuEq over 1 m is an exceptional grade for an open-pit gold equivalent project, contributing to resource conversion efforts within the mine plan area. True width is estimated at 75-90% of drilled length.
Positive factors
- Bonanza Intercept
- Resource conversion potential
- Mine plan optimization
- Good QA/QC
- True width disclosed
- QP/CP Signed
- Metal equivalent assumptions disclosed
Evidence · table
“6.17”
Context: 1
J-26-357goldGrade: 0.29Grade Unit: g/t AuEqIntercept: 18 mView all detailsHide details
Identity
- Hole ID
- J-26-357
- Commodity
- gold
- Ticker
- TLG
Geometry
- Grade
- 0.29
- Grade Unit
- g/t AuEq
- Intercept
- 18 m
- From
- 212 m
- To
- 230 m
Classification
- Program
- resource
- Group ID
- J-26-357:212.0-230.0
- Mining Method
- open_pit
Location
- Dip
- -55 °
QA/QC
- Laboratory
- ALS Laboratory
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Metal Equivalent
- Metal Eq. Grade
- 0.29
- Metal Eq. Unit
- g/t AuEq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-06-16T00:00:00.000Z
Reasoning: This intercept of 0.29 g/t AuEq over 18 m is a weak grade for an open-pit gold equivalent project, contributing to resource conversion efforts within the mine plan area. True width is estimated at 75-90% of drilled length.
Positive factors
- Resource conversion potential
- Mine plan optimization
- Good QA/QC
- True width disclosed
- QP/CP Signed
- Metal equivalent assumptions disclosed
Evidence · table
“0.29”
Context: 18
J-26-357goldGrade: 1.05Grade Unit: g/t AuEqIntercept: 1 mView all detailsHide details
Identity
- Hole ID
- J-26-357
- Commodity
- gold
- Ticker
- TLG
Geometry
- Grade
- 1.05
- Grade Unit
- g/t AuEq
- Intercept
- 1 m
- From
- 336 m
- To
- 337 m
Classification
- Program
- resource
- Group ID
- J-26-357:336.0-337.0
- Mining Method
- open_pit
Location
- Dip
- -55 °
QA/QC
- Laboratory
- ALS Laboratory
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Metal Equivalent
- Metal Eq. Grade
- 1.05
- Metal Eq. Unit
- g/t AuEq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-06-16T00:00:00.000Z
Reasoning: This intercept of 1.05 g/t AuEq over 1 m is a moderate grade for an open-pit gold equivalent project, contributing to resource conversion efforts within the mine plan area. True width is estimated at 75-90% of drilled length.
Positive factors
- Resource conversion potential
- Mine plan optimization
- Good QA/QC
- True width disclosed
- QP/CP Signed
- Metal equivalent assumptions disclosed
Evidence · table
“1.05”
Context: 1
J-26-358goldGrade: 0.23Grade Unit: g/t AuEqIntercept: 7 mView all detailsHide details
Identity
- Hole ID
- J-26-358
- Commodity
- gold
- Ticker
- TLG
Geometry
- Grade
- 0.23
- Grade Unit
- g/t AuEq
- Intercept
- 7 m
- From
- 48 m
- To
- 55 m
Classification
- Program
- resource
- Group ID
- J-26-358:48.0-55.0
- Mining Method
- open_pit
Location
- Dip
- -55 °
QA/QC
- Laboratory
- ALS Laboratory
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Metal Equivalent
- Metal Eq. Grade
- 0.23
- Metal Eq. Unit
- g/t AuEq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-06-16T00:00:00.000Z
Reasoning: This intercept of 0.23 g/t AuEq over 7 m is a weak grade for an open-pit gold equivalent project, contributing to resource conversion efforts within the mine plan area. True width is estimated at 75-90% of drilled length.
Positive factors
- Resource conversion potential
- Mine plan optimization
- Good QA/QC
- True width disclosed
- QP/CP Signed
- Metal equivalent assumptions disclosed
Evidence · table
“0.23”
Context: 7
J-26-359goldGrade: 0.49Grade Unit: g/t AuEqIntercept: 23 mView all detailsHide details
Identity
- Hole ID
- J-26-359
- Commodity
- gold
- Ticker
- TLG
Geometry
- Grade
- 0.49
- Grade Unit
- g/t AuEq
- Intercept
- 23 m
- From
- 33 m
- To
- 56 m
Classification
- Program
- resource
- Group ID
- J-26-359:33.0-56.0
- Mining Method
- open_pit
Location
- Dip
- -55 °
QA/QC
- Laboratory
- ALS Laboratory
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Metal Equivalent
- Metal Eq. Grade
- 0.49
- Metal Eq. Unit
- g/t AuEq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-06-16T00:00:00.000Z
Reasoning: This intercept of 0.49 g/t AuEq over 23 m is a moderate grade for an open-pit gold equivalent project, contributing to resource conversion efforts within the mine plan area. True width is estimated at 75-90% of drilled length.
Positive factors
- Resource conversion potential
- Mine plan optimization
- Good QA/QC
- True width disclosed
- QP/CP Signed
- Metal equivalent assumptions disclosed
Evidence · table
“0.49”
Context: 23
J-26-359goldGrade: 1.15Grade Unit: g/t AuEqIntercept: 37 mView all detailsHide details
Identity
- Hole ID
- J-26-359
- Commodity
- gold
- Ticker
- TLG
Geometry
- Grade
- 1.15
- Grade Unit
- g/t AuEq
- Intercept
- 37 m
- From
- 66 m
- To
- 103 m
Classification
- Program
- resource
- Group ID
- J-26-359:66.0-103.0
- Mining Method
- open_pit
Location
- Dip
- -55 °
QA/QC
- Laboratory
- ALS Laboratory
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Metal Equivalent
- Metal Eq. Grade
- 1.15
- Metal Eq. Unit
- g/t AuEq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-06-16T00:00:00.000Z
Reasoning: This intercept of 1.15 g/t AuEq over 37 m is a strong grade for an open-pit gold equivalent project, contributing to resource conversion efforts within the mine plan area. True width is estimated at 75-90% of drilled length.
Positive factors
- High-grade intercepts
- Resource conversion potential
- Mine plan optimization
- Good QA/QC
- True width disclosed
- QP/CP Signed
- Metal equivalent assumptions disclosed
Evidence · table
“1.15”
Context: 37
J-26-359goldGrade: 3.84Grade Unit: g/t AuEqIntercept: 5 mView all detailsHide details
Identity
- Hole ID
- J-26-359
- Commodity
- gold
- Ticker
- TLG
Geometry
- Grade
- 3.84
- Grade Unit
- g/t AuEq
- Intercept
- 5 m
- From
- 82 m
- To
- 87 m
Classification
- Program
- resource
- Group ID
- J-26-359:82.0-87.0
- Mining Method
- open_pit
Location
- Dip
- -55 °
QA/QC
- Laboratory
- ALS Laboratory
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Metal Equivalent
- Metal Eq. Grade
- 3.84
- Metal Eq. Unit
- g/t AuEq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-06-16T00:00:00.000Z
Reasoning: This intercept of 3.84 g/t AuEq over 5 m is an exceptional grade for an open-pit gold equivalent project, contributing to resource conversion efforts within the mine plan area. True width is estimated at 75-90% of drilled length.
Positive factors
- High-grade intercepts
- Resource conversion potential
- Mine plan optimization
- Good QA/QC
- True width disclosed
- QP/CP Signed
- Metal equivalent assumptions disclosed
Evidence · table
“3.84”
Context: 5
J-26-359goldGrade: 0.76Grade Unit: g/t AuEqIntercept: 34 mView all detailsHide details
Identity
- Hole ID
- J-26-359
- Commodity
- gold
- Ticker
- TLG
Geometry
- Grade
- 0.76
- Grade Unit
- g/t AuEq
- Intercept
- 34 m
- From
- 116 m
- To
- 150 m
Classification
- Program
- resource
- Group ID
- J-26-359:116.0-150.0
- Mining Method
- open_pit
Location
- Dip
- -55 °
QA/QC
- Laboratory
- ALS Laboratory
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Metal Equivalent
- Metal Eq. Grade
- 0.76
- Metal Eq. Unit
- g/t AuEq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-06-16T00:00:00.000Z
Reasoning: This intercept of 0.76 g/t AuEq over 34 m is a moderate grade for an open-pit gold equivalent project, contributing to resource conversion efforts within the mine plan area. True width is estimated at 75-90% of drilled length.
Positive factors
- Resource conversion potential
- Mine plan optimization
- Good QA/QC
- True width disclosed
- QP/CP Signed
- Metal equivalent assumptions disclosed
Evidence · table
“0.76”
Context: 34
J-26-360goldGrade: 0.35Grade Unit: g/t AuEqIntercept: 13.6 mView all detailsHide details
Identity
- Hole ID
- J-26-360
- Commodity
- gold
- Ticker
- TLG
Geometry
- Grade
- 0.35
- Grade Unit
- g/t AuEq
- Intercept
- 13.6 m
- From
- 28.4 m
- To
- 42 m
Classification
- Program
- resource
- Group ID
- J-26-360:28.4-42.0
- Mining Method
- open_pit
Location
- Dip
- -55 °
QA/QC
- Laboratory
- ALS Laboratory
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Metal Equivalent
- Metal Eq. Grade
- 0.35
- Metal Eq. Unit
- g/t AuEq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-06-16T00:00:00.000Z
Reasoning: This intercept of 0.35 g/t AuEq over 13.6 m is a weak grade for an open-pit gold equivalent project, contributing to resource conversion efforts within the mine plan area. True width is estimated at 75-90% of drilled length.
Positive factors
- Resource conversion potential
- Mine plan optimization
- Good QA/QC
- True width disclosed
- QP/CP Signed
- Metal equivalent assumptions disclosed
Evidence · table
“0.35”
Context: 13.6
J-26-360goldGrade: 0.28Grade Unit: g/t AuEqIntercept: 10 mView all detailsHide details
Identity
- Hole ID
- J-26-360
- Commodity
- gold
- Ticker
- TLG
Geometry
- Grade
- 0.28
- Grade Unit
- g/t AuEq
- Intercept
- 10 m
- From
- 54 m
- To
- 64 m
Classification
- Program
- resource
- Group ID
- J-26-360:54.0-64.0
- Mining Method
- open_pit
Location
- Dip
- -55 °
QA/QC
- Laboratory
- ALS Laboratory
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Metal Equivalent
- Metal Eq. Grade
- 0.28
- Metal Eq. Unit
- g/t AuEq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-06-16T00:00:00.000Z
Reasoning: This intercept of 0.28 g/t AuEq over 10 m is a weak grade for an open-pit gold equivalent project, contributing to resource conversion efforts within the mine plan area. True width is estimated at 75-90% of drilled length.
Positive factors
- Resource conversion potential
- Mine plan optimization
- Good QA/QC
- True width disclosed
- QP/CP Signed
- Metal equivalent assumptions disclosed
Evidence · table
“0.28”
Context: 10
J-26-360goldGrade: 0.78Grade Unit: g/t AuEqIntercept: 54 mView all detailsHide details
Identity
- Hole ID
- J-26-360
- Commodity
- gold
- Ticker
- TLG
Geometry
- Grade
- 0.78
- Grade Unit
- g/t AuEq
- Intercept
- 54 m
- From
- 72 m
- To
- 126 m
Classification
- Program
- resource
- Group ID
- J-26-360:72.0-126.0
- Mining Method
- open_pit
Location
- Dip
- -55 °
QA/QC
- Laboratory
- ALS Laboratory
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Metal Equivalent
- Metal Eq. Grade
- 0.78
- Metal Eq. Unit
- g/t AuEq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-06-16T00:00:00.000Z
Reasoning: This intercept of 0.78 g/t AuEq over 54 m is a moderate grade for an open-pit gold equivalent project, contributing to resource conversion efforts within the mine plan area. True width is estimated at 75-90% of drilled length.
Positive factors
- Resource conversion potential
- Mine plan optimization
- Good QA/QC
- True width disclosed
- QP/CP Signed
- Metal equivalent assumptions disclosed
Evidence · table
“0.78”
Context: 54
J-26-360goldGrade: 3.03Grade Unit: g/t AuEqIntercept: 3.9 mView all detailsHide details
Identity
- Hole ID
- J-26-360
- Commodity
- gold
- Ticker
- TLG
Geometry
- Grade
- 3.03
- Grade Unit
- g/t AuEq
- Intercept
- 3.9 m
- From
- 72 m
- To
- 75.9 m
Classification
- Program
- resource
- Group ID
- J-26-360:72.0-75.9
- Mining Method
- open_pit
Location
- Dip
- -55 °
QA/QC
- Laboratory
- ALS Laboratory
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Metal Equivalent
- Metal Eq. Grade
- 3.03
- Metal Eq. Unit
- g/t AuEq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-06-16T00:00:00.000Z
Reasoning: This intercept of 3.03 g/t AuEq over 3.9 m is an exceptional grade for an open-pit gold equivalent project, contributing to resource conversion efforts within the mine plan area. True width is estimated at 75-90% of drilled length.
Positive factors
- High-grade intercepts
- Resource conversion potential
- Mine plan optimization
- Good QA/QC
- True width disclosed
- QP/CP Signed
- Metal equivalent assumptions disclosed
Evidence · table
“3.03”
Context: 3.9
J-26-360goldGrade: 2.02Grade Unit: g/t AuEqIntercept: 6 mView all detailsHide details
Identity
- Hole ID
- J-26-360
- Commodity
- gold
- Ticker
- TLG
Geometry
- Grade
- 2.02
- Grade Unit
- g/t AuEq
- Intercept
- 6 m
- From
- 96 m
- To
- 102 m
Classification
- Program
- resource
- Group ID
- J-26-360:96.0-102.0
- Mining Method
- open_pit
Location
- Dip
- -55 °
QA/QC
- Laboratory
- ALS Laboratory
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Metal Equivalent
- Metal Eq. Grade
- 2.02
- Metal Eq. Unit
- g/t AuEq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-06-16T00:00:00.000Z
Reasoning: This intercept of 2.02 g/t AuEq over 6 m is a strong grade for an open-pit gold equivalent project, contributing to resource conversion efforts within the mine plan area. True width is estimated at 75-90% of drilled length.
Positive factors
- High-grade intercepts
- Resource conversion potential
- Mine plan optimization
- Good QA/QC
- True width disclosed
- QP/CP Signed
- Metal equivalent assumptions disclosed
Evidence · table
“2.02”
Context: 6
J-26-361goldGrade: 0.52Grade Unit: g/t AuEqIntercept: 20 mView all detailsHide details
Identity
- Hole ID
- J-26-361
- Commodity
- gold
- Ticker
- TLG
Geometry
- Grade
- 0.52
- Grade Unit
- g/t AuEq
- Intercept
- 20 m
- From
- 32 m
- To
- 52 m
Classification
- Program
- resource
- Group ID
- J-26-361:32.0-52.0
- Mining Method
- open_pit
Location
- Dip
- -58 °
QA/QC
- Laboratory
- ALS Laboratory
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Metal Equivalent
- Metal Eq. Grade
- 0.52
- Metal Eq. Unit
- g/t AuEq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-06-16T00:00:00.000Z
Reasoning: This intercept of 0.52 g/t AuEq over 20 m is a moderate grade for an open-pit gold equivalent project, contributing to resource conversion efforts within the mine plan area. True width is estimated at 75-90% of drilled length.
Positive factors
- Resource conversion potential
- Mine plan optimization
- Good QA/QC
- True width disclosed
- QP/CP Signed
- Metal equivalent assumptions disclosed
Evidence · table
“0.52”
Context: 20
J-26-361goldGrade: 0.23Grade Unit: g/t AuEqIntercept: 7 mView all detailsHide details
Identity
- Hole ID
- J-26-361
- Commodity
- gold
- Ticker
- TLG
Geometry
- Grade
- 0.23
- Grade Unit
- g/t AuEq
- Intercept
- 7 m
- From
- 66 m
- To
- 73 m
Classification
- Program
- resource
- Group ID
- J-26-361:66.0-73.0
- Mining Method
- open_pit
Location
- Dip
- -58 °
QA/QC
- Laboratory
- ALS Laboratory
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Metal Equivalent
- Metal Eq. Grade
- 0.23
- Metal Eq. Unit
- g/t AuEq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-06-16T00:00:00.000Z
Reasoning: This intercept of 0.23 g/t AuEq over 7 m is a weak grade for an open-pit gold equivalent project, contributing to resource conversion efforts within the mine plan area. True width is estimated at 75-90% of drilled length.
Positive factors
- Resource conversion potential
- Mine plan optimization
- Good QA/QC
- True width disclosed
- QP/CP Signed
- Metal equivalent assumptions disclosed
Evidence · table
“0.23”
Context: 7
J-26-361goldGrade: 0.3Grade Unit: g/t AuEqIntercept: 30 mView all detailsHide details
Identity
- Hole ID
- J-26-361
- Commodity
- gold
- Ticker
- TLG
Geometry
- Grade
- 0.3
- Grade Unit
- g/t AuEq
- Intercept
- 30 m
- From
- 82 m
- To
- 112 m
Classification
- Program
- resource
- Group ID
- J-26-361:82.0-112.0
- Mining Method
- open_pit
Location
- Dip
- -58 °
QA/QC
- Laboratory
- ALS Laboratory
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Metal Equivalent
- Metal Eq. Grade
- 0.3
- Metal Eq. Unit
- g/t AuEq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-06-16T00:00:00.000Z
Reasoning: This intercept of 0.3 g/t AuEq over 30 m is a weak grade for an open-pit gold equivalent project, contributing to resource conversion efforts within the mine plan area. True width is estimated at 75-90% of drilled length.
Positive factors
- Resource conversion potential
- Mine plan optimization
- Good QA/QC
- True width disclosed
- QP/CP Signed
- Metal equivalent assumptions disclosed
Evidence · table
“0.30”
Context: 30
J-26-361goldGrade: 0.32Grade Unit: g/t AuEqIntercept: 5 mView all detailsHide details
Identity
- Hole ID
- J-26-361
- Commodity
- gold
- Ticker
- TLG
Geometry
- Grade
- 0.32
- Grade Unit
- g/t AuEq
- Intercept
- 5 m
- From
- 121 m
- To
- 126 m
Classification
- Program
- resource
- Group ID
- J-26-361:121.0-126.0
- Mining Method
- open_pit
Location
- Dip
- -58 °
QA/QC
- Laboratory
- ALS Laboratory
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Metal Equivalent
- Metal Eq. Grade
- 0.32
- Metal Eq. Unit
- g/t AuEq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-06-16T00:00:00.000Z
Reasoning: This intercept of 0.32 g/t AuEq over 5 m is a weak grade for an open-pit gold equivalent project, contributing to resource conversion efforts within the mine plan area. True width is estimated at 75-90% of drilled length.
Positive factors
- Resource conversion potential
- Mine plan optimization
- Good QA/QC
- True width disclosed
- QP/CP Signed
- Metal equivalent assumptions disclosed
Evidence · table
“0.32”
Context: 5
J-26-362goldGrade: 0.44Grade Unit: g/t AuEqIntercept: 10.8 mView all detailsHide details
Identity
- Hole ID
- J-26-362
- Commodity
- gold
- Ticker
- TLG
Geometry
- Grade
- 0.44
- Grade Unit
- g/t AuEq
- Intercept
- 10.8 m
- From
- 47.2 m
- To
- 58 m
Classification
- Program
- resource
- Group ID
- J-26-362:47.2-58.0
- Mining Method
- open_pit
Location
- Dip
- -50 °
QA/QC
- Laboratory
- ALS Laboratory
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Metal Equivalent
- Metal Eq. Grade
- 0.44
- Metal Eq. Unit
- g/t AuEq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-06-16T00:00:00.000Z
Reasoning: This intercept of 0.44 g/t AuEq over 10.8 m is a moderate grade for an open-pit gold equivalent project, contributing to resource conversion efforts within the mine plan area. True width is estimated at 75-90% of drilled length.
Positive factors
- Resource conversion potential
- Mine plan optimization
- Good QA/QC
- True width disclosed
- QP/CP Signed
- Metal equivalent assumptions disclosed
Evidence · table
“0.44”
Context: 10.8
J-26-362goldGrade: 1.06Grade Unit: g/t AuEqIntercept: 1.3 mView all detailsHide details
Identity
- Hole ID
- J-26-362
- Commodity
- gold
- Ticker
- TLG
Geometry
- Grade
- 1.06
- Grade Unit
- g/t AuEq
- Intercept
- 1.3 m
- From
- 65 m
- To
- 66.3 m
Classification
- Program
- resource
- Group ID
- J-26-362:65.0-66.3
- Mining Method
- open_pit
Location
- Dip
- -50 °
QA/QC
- Laboratory
- ALS Laboratory
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Metal Equivalent
- Metal Eq. Grade
- 1.06
- Metal Eq. Unit
- g/t AuEq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-06-16T00:00:00.000Z
Reasoning: This intercept of 1.06 g/t AuEq over 1.3 m is a moderate grade for an open-pit gold equivalent project, contributing to resource conversion efforts within the mine plan area. True width is estimated at 75-90% of drilled length.
Positive factors
- Resource conversion potential
- Mine plan optimization
- Good QA/QC
- True width disclosed
- QP/CP Signed
- Metal equivalent assumptions disclosed
Evidence · table
“1.06”
Context: 1.3
J-26-362goldGrade: 0.37Grade Unit: g/t AuEqIntercept: 6 mView all detailsHide details
Identity
- Hole ID
- J-26-362
- Commodity
- gold
- Ticker
- TLG
Geometry
- Grade
- 0.37
- Grade Unit
- g/t AuEq
- Intercept
- 6 m
- From
- 95 m
- To
- 101 m
Classification
- Program
- resource
- Group ID
- J-26-362:95.0-101.0
- Mining Method
- open_pit
Location
- Dip
- -50 °
QA/QC
- Laboratory
- ALS Laboratory
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Metal Equivalent
- Metal Eq. Grade
- 0.37
- Metal Eq. Unit
- g/t AuEq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-06-16T00:00:00.000Z
Reasoning: This intercept of 0.37 g/t AuEq over 6 m is a weak grade for an open-pit gold equivalent project, contributing to resource conversion efforts within the mine plan area. True width is estimated at 75-90% of drilled length.
Positive factors
- Resource conversion potential
- Mine plan optimization
- Good QA/QC
- True width disclosed
- QP/CP Signed
- Metal equivalent assumptions disclosed
Evidence · table
“0.37”
Context: 6
J-26-362goldGrade: 0.56Grade Unit: g/t AuEqIntercept: 7 mView all detailsHide details
Identity
- Hole ID
- J-26-362
- Commodity
- gold
- Ticker
- TLG
Geometry
- Grade
- 0.56
- Grade Unit
- g/t AuEq
- Intercept
- 7 m
- From
- 110 m
- To
- 117 m
Classification
- Program
- resource
- Group ID
- J-26-362:110.0-117.0
- Mining Method
- open_pit
Location
- Dip
- -50 °
QA/QC
- Laboratory
- ALS Laboratory
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Metal Equivalent
- Metal Eq. Grade
- 0.56
- Metal Eq. Unit
- g/t AuEq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-06-16T00:00:00.000Z
Reasoning: This intercept of 0.56 g/t AuEq over 7 m is a moderate grade for an open-pit gold equivalent project, contributing to resource conversion efforts within the mine plan area. True width is estimated at 75-90% of drilled length.
Positive factors
- Resource conversion potential
- Mine plan optimization
- Good QA/QC
- True width disclosed
- QP/CP Signed
- Metal equivalent assumptions disclosed
Evidence · table
“0.56”
Context: 7
J-26-362goldGrade: 0.44Grade Unit: g/t AuEqIntercept: 9.9 mView all detailsHide details
Identity
- Hole ID
- J-26-362
- Commodity
- gold
- Ticker
- TLG
Geometry
- Grade
- 0.44
- Grade Unit
- g/t AuEq
- Intercept
- 9.9 m
- From
- 147 m
- To
- 156.9 m
Classification
- Program
- resource
- Group ID
- J-26-362:147.0-156.9
- Mining Method
- open_pit
Location
- Dip
- -50 °
QA/QC
- Laboratory
- ALS Laboratory
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Metal Equivalent
- Metal Eq. Grade
- 0.44
- Metal Eq. Unit
- g/t AuEq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-06-16T00:00:00.000Z
Reasoning: This intercept of 0.44 g/t AuEq over 9.9 m is a moderate grade for an open-pit gold equivalent project, contributing to resource conversion efforts within the mine plan area. True width is estimated at 75-90% of drilled length.
Positive factors
- Resource conversion potential
- Mine plan optimization
- Good QA/QC
- True width disclosed
- QP/CP Signed
- Metal equivalent assumptions disclosed
Evidence · table
“0.44”
Context: 9.9
J-26-362goldGrade: 0.41Grade Unit: g/t AuEqIntercept: 37 mView all detailsHide details
Identity
- Hole ID
- J-26-362
- Commodity
- gold
- Ticker
- TLG
Geometry
- Grade
- 0.41
- Grade Unit
- g/t AuEq
- Intercept
- 37 m
- From
- 168 m
- To
- 205 m
Classification
- Program
- resource
- Group ID
- J-26-362:168.0-205.0
- Mining Method
- open_pit
Location
- Dip
- -50 °
QA/QC
- Laboratory
- ALS Laboratory
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Metal Equivalent
- Metal Eq. Grade
- 0.41
- Metal Eq. Unit
- g/t AuEq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-06-16T00:00:00.000Z
Reasoning: This intercept of 0.41 g/t AuEq over 37 m is a moderate grade for an open-pit gold equivalent project, contributing to resource conversion efforts within the mine plan area. True width is estimated at 75-90% of drilled length.
Positive factors
- Resource conversion potential
- Mine plan optimization
- Good QA/QC
- True width disclosed
- QP/CP Signed
- Metal equivalent assumptions disclosed
Evidence · table
“0.41”
Context: 37
How Atlas produces this analysis
Minestarters Atlas uses automated extraction to summarize mining announcements, identify reported measurements, and classify supporting evidence. Sentiment reflects the extracted narrative and classification rules; it is an interpretation, not a reported measurement. Evidence quotes and context are provided where available. Missing data, low-confidence results, and review flags indicate limitations. Check the original publisher announcement before relying on an interpretation.