Triumph Gold Reports Results from Diamond Drilling of the Nucleus Au-Ag-Cu Deposit, Freegold Mountain Property, Yukon
Original announcement by tmx on
- Company
- Triumph Gold Corp.
- Ticker
- TIG
- Exchange
- TSX
- Region
- Yukon Territory
- Primary commodity
- Gold
- Secondary commodities
- Silver, Copper
- Document categories
- Drill results
- Extracted
- 2026-08-22 15:18:21 UTC
Analysis by Minestarters Atlas
Minestarters Atlas analysis
Summary
Triumph Gold announced significant results from its 2017 diamond drilling program at the Nucleus Au-Ag-Cu deposit on the Freegold Mountain Property, Yukon. The program included high-grade gold intercepts, successful step-out drilling extending mineralization, and infill drilling that confirmed and improved grades within the existing resource. These results highlight the potential for increasing both the size and grade of the Nucleus resource.
Reasoning: Triumph Gold's 2017 drill campaign at Nucleus delivered strong results, with several high-grade gold intercepts and successful step-out drilling extending mineralization. Infill drilling also confirmed and improved grades within the existing resource. While true widths are not yet determined, the overall program demonstrates significant potential for resource expansion and grade enhancement, supported by robust QA/QC.
Positive factors
- High-grade gold intercepts, including 18.5 g/t Au over 1.5 m, significantly exceed the project's average grade.
- Successful step-out drilling confirms the potential to extend mineralization beyond the current resource shell.
- Infill drilling within the resource area returned grades exceeding the deposit average, indicating potential for resource growth and grade improvement.
- Comprehensive QA/QC procedures are disclosed, and the results are approved by a Qualified Person.
Negative factors
- True widths of intercepts have not been determined, which can lead to overestimation of actual mineralized thickness.
Low confidence — this extraction should be reviewed alongside the original source.
Facts used in scoring: 75
Classification and evidence
Bonanza Interceptpositive
Exceptionally high-grade zone, well above the deposit-type norm.
Why it applies: The intercept in N17-02 of 18.5 g/t Au over 1.5 m is exceptionally high-grade, well above the typical threshold for an open-pit gold deposit.
Evidence · table
“18.500”
Context: 1.50
Bonanza Interceptpositive
Exceptionally high-grade zone, well above the deposit-type norm.
Why it applies: The intercept in N17-07 of 11.35 g/t Au over 1.44 m is exceptionally high-grade, well above the typical threshold for an open-pit gold deposit.
Evidence · table
“11.350”
Context: 1.44
Bonanza Interceptpositive
Exceptionally high-grade zone, well above the deposit-type norm.
Why it applies: The intercept in N17-12 of 10.2 g/t Au over 1.1 m is exceptionally high-grade, well above the typical threshold for an open-pit gold deposit.
Evidence · table
“10.200”
Context: 1.10
Step-Out Extensionpositive
Mineralization extended beyond the previously known limit.
Why it applies: Five drill holes were explicitly designed as 'step-out drill holes that tested for extensions of Nucleus mineralization to the north, south and east of the current resource area'.
Evidence · text
“Five step-out drill holes that tested for extensions of Nucleus mineralization to the north, south and east of the current resource area”
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: The release details the QA/QC program, including the use of internal standards, blanks, and duplicates, and specifies re-analysis procedures for failed samples.
Evidence · text
“Quality assurance and control (QAQC) is maintained at the lab through rigorous use of internal standards, blanks and duplicates. An additional QAQC program was administered by Triumph Gold”
QP/CP Signedpositive · Story-specific tag
Qualified Person (QP) or Competent Person (CP) named and signed off — a member of a recognized professional association (e.g., AusIMM, SME, AIG, P.Geo) with relevant experience.
Why it applies: The technical content of the news release has been reviewed and approved by Tony Barresi, Ph.D., P.Geo., VP Exploration for the company, and qualified person as defined by National Instrument 43-101.
Evidence · text
“The technical content of this news release has been reviewed and approved by Tony Barresi , Ph.D., P.Geo., VP Exploration for the company, and qualified person as defined by National Instrument 43-101.”
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: Six drill holes were explicitly drilled 'within the outline of the resources, but in areas with the lowest historical drill density, to test the resource, as well as infill prominent gaps in the block model'.
Evidence · text
“Six drill holes totalling 1,580 metres were drilled within the outline of the resources, but in areas with the lowest historical drill density, to test the resource, as well as infill prominent gaps in the block model”
Apparent Width Onlynegative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Why it applies: The document explicitly states that 'True widths have not been determined' for the reported drill hole intercepts.
Evidence · text
“True widths have not been determined.”
Extracted facts
Stored fact records: 75. Some facts used in scoring do not have a stored record.
Drill Results (75)
N17-02Nucleus · goldGrade: 1.086Grade Unit: g/tIntercept: 11.79 mView all detailsHide details
Identity
- Hole ID
- N17-02
- Project
- Nucleus
- Commodity
- gold
- Region
- canada_yt
- Reported Region
- Yukon Territory
- Ticker
- TIG
Geometry
- Grade
- 1.086
- Grade Unit
- g/t
- Intercept
- 11.79 m
- From
- 46.12 m
- To
- 57.91 m
- Hole Depth
- 260.6 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- N17-02:46.12-57.91
- Mining Method
- open_pit
Location
- Easting
- 379249
- Northing
- 6913635
- CRS
- NAD83, Zone 8
- Azimuth
- 0 °
- Dip
- -50 °
- Loc. Confidence
- high
QA/QC
- Laboratory
- ALS Global
- QA/QC Disclosed
- Yes
- Lab Certified
- No
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- Yes
Compositing
- Cutoff Grade
- 0.3
- Cutoff Unit
- g/t AuEq
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2018-01-18T00:00:00.000Z
Reasoning: This infill intercept shows a gold grade above the project average, contributing positively to resource confidence, though true width is not known.
Positive factors
- Gold grade (1.086 g/t) is above the project average (0.502 g/t Au).
Negative factors
- True width not determined.
Evidence · table
“1.086”
Context: 11.79
N17-02Nucleus · silverGrade: 0.1Grade Unit: g/tIntercept: 11.79 mView all detailsHide details
Identity
- Hole ID
- N17-02
- Project
- Nucleus
- Commodity
- silver
- Region
- canada_yt
- Reported Region
- Yukon Territory
- Ticker
- TIG
Geometry
- Grade
- 0.1
- Grade Unit
- g/t
- Intercept
- 11.79 m
- From
- 46.12 m
- To
- 57.91 m
- Hole Depth
- 260.6 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- N17-02:46.12-57.91
- Mining Method
- open_pit
Location
- Easting
- 379249
- Northing
- 6913635
- CRS
- NAD83, Zone 8
- Azimuth
- 0 °
- Dip
- -50 °
- Loc. Confidence
- high
QA/QC
- Laboratory
- ALS Global
- QA/QC Disclosed
- Yes
- Lab Certified
- No
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- Yes
Compositing
- Cutoff Grade
- 0.3
- Cutoff Unit
- g/t AuEq
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2018-01-18T00:00:00.000Z
Reasoning: This infill intercept shows a low silver grade, though true width is not known.
Negative factors
- Silver grade is low.
- True width not determined.
Evidence · table
“0.1”
Context: 11.79
N17-02Nucleus · copperGrade: 0.016Grade Unit: %Intercept: 11.79 mView all detailsHide details
Identity
- Hole ID
- N17-02
- Project
- Nucleus
- Commodity
- copper
- Region
- canada_yt
- Reported Region
- Yukon Territory
- Ticker
- TIG
Geometry
- Grade
- 0.016
- Grade Unit
- %
- Intercept
- 11.79 m
- From
- 46.12 m
- To
- 57.91 m
- Hole Depth
- 260.6 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- N17-02:46.12-57.91
- Mining Method
- open_pit
Location
- Easting
- 379249
- Northing
- 6913635
- CRS
- NAD83, Zone 8
- Azimuth
- 0 °
- Dip
- -50 °
- Loc. Confidence
- high
QA/QC
- Laboratory
- ALS Global
- QA/QC Disclosed
- Yes
- Lab Certified
- No
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- Yes
Compositing
- Cutoff Grade
- 0.3
- Cutoff Unit
- g/t AuEq
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2018-01-18T00:00:00.000Z
Reasoning: This infill intercept shows a very low copper grade, well below the project average, though true width is not known.
Negative factors
- Copper grade (0.016%) is well below the project average (0.164% Cu).
- True width not determined.
Evidence · table
“0.016”
Context: 11.79
N17-02Nucleus · goldGrade: 1.545Grade Unit: g/tIntercept: 21.9 mView all detailsHide details
Identity
- Hole ID
- N17-02
- Project
- Nucleus
- Commodity
- gold
- Region
- canada_yt
- Reported Region
- Yukon Territory
- Ticker
- TIG
Geometry
- Grade
- 1.545
- Grade Unit
- g/t
- Intercept
- 21.9 m
- From
- 173.1 m
- To
- 195 m
- Hole Depth
- 260.6 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- N17-02:173.1-195.0
- Mining Method
- open_pit
Location
- Easting
- 379249
- Northing
- 6913635
- CRS
- NAD83, Zone 8
- Azimuth
- 0 °
- Dip
- -50 °
- Loc. Confidence
- high
QA/QC
- Laboratory
- ALS Global
- QA/QC Disclosed
- Yes
- Lab Certified
- No
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- Yes
Compositing
- Cutoff Grade
- 0.3
- Cutoff Unit
- g/t AuEq
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2018-01-18T00:00:00.000Z
Reasoning: This infill intercept shows a strong gold grade over a moderate width, well above the project average, enhancing resource confidence.
Positive factors
- Gold grade (1.545 g/t) is significantly above the project average (0.502 g/t Au).
- Intercept length (21.9 m) is moderate.
Negative factors
- True width not determined.
Evidence · table
“1.545”
Context: 21.90
N17-02Nucleus · silverGrade: 1Grade Unit: g/tIntercept: 21.9 mView all detailsHide details
Identity
- Hole ID
- N17-02
- Project
- Nucleus
- Commodity
- silver
- Region
- canada_yt
- Reported Region
- Yukon Territory
- Ticker
- TIG
Geometry
- Grade
- 1
- Grade Unit
- g/t
- Intercept
- 21.9 m
- From
- 173.1 m
- To
- 195 m
- Hole Depth
- 260.6 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- N17-02:173.1-195.0
- Mining Method
- open_pit
Location
- Easting
- 379249
- Northing
- 6913635
- CRS
- NAD83, Zone 8
- Azimuth
- 0 °
- Dip
- -50 °
- Loc. Confidence
- high
QA/QC
- Laboratory
- ALS Global
- QA/QC Disclosed
- Yes
- Lab Certified
- No
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- Yes
Compositing
- Cutoff Grade
- 0.3
- Cutoff Unit
- g/t AuEq
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2018-01-18T00:00:00.000Z
Reasoning: This infill intercept shows a low silver grade, though true width is not known.
Negative factors
- Silver grade is low.
- True width not determined.
Evidence · table
“1.0”
Context: 21.90
N17-02Nucleus · copperGrade: 0.099Grade Unit: %Intercept: 21.9 mView all detailsHide details
Identity
- Hole ID
- N17-02
- Project
- Nucleus
- Commodity
- copper
- Region
- canada_yt
- Reported Region
- Yukon Territory
- Ticker
- TIG
Geometry
- Grade
- 0.099
- Grade Unit
- %
- Intercept
- 21.9 m
- From
- 173.1 m
- To
- 195 m
- Hole Depth
- 260.6 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- N17-02:173.1-195.0
- Mining Method
- open_pit
Location
- Easting
- 379249
- Northing
- 6913635
- CRS
- NAD83, Zone 8
- Azimuth
- 0 °
- Dip
- -50 °
- Loc. Confidence
- high
QA/QC
- Laboratory
- ALS Global
- QA/QC Disclosed
- Yes
- Lab Certified
- No
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- Yes
Compositing
- Cutoff Grade
- 0.3
- Cutoff Unit
- g/t AuEq
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2018-01-18T00:00:00.000Z
Reasoning: This infill intercept shows a copper grade below the project average, though true width is not known.
Negative factors
- Copper grade (0.099%) is below the project average (0.164% Cu).
- True width not determined.
Evidence · table
“0.099”
Context: 21.90
N17-02Nucleus · goldGrade: 18.5Grade Unit: g/tIntercept: 1.5 mView all detailsHide details
Identity
- Hole ID
- N17-02
- Project
- Nucleus
- Commodity
- gold
- Region
- canada_yt
- Reported Region
- Yukon Territory
- Ticker
- TIG
Geometry
- Grade
- 18.5
- Grade Unit
- g/t
- Intercept
- 1.5 m
- From
- 174.5 m
- To
- 176 m
- Hole Depth
- 260.6 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- N17-02:174.5-176.0
- Mining Method
- open_pit
Location
- Easting
- 379249
- Northing
- 6913635
- CRS
- NAD83, Zone 8
- Azimuth
- 0 °
- Dip
- -50 °
- Loc. Confidence
- high
QA/QC
- Laboratory
- ALS Global
- QA/QC Disclosed
- Yes
- Lab Certified
- No
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- Yes
Compositing
- Cutoff Grade
- 0.3
- Cutoff Unit
- g/t AuEq
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2018-01-18T00:00:00.000Z
Reasoning: This bonanza-grade gold intercept, though narrow, is highly material and significantly exceeds typical grades for an open-pit deposit, enhancing the overall resource potential.
Positive factors
- Exceptional gold grade (18.5 g/t) is well above the project average and bonanza-grade for an open-pit deposit.
- This is a high-grade sub-interval within a broader mineralized zone.
Negative factors
- Intercept length is narrow (1.5 m).
- True width not determined.
Evidence · table
“18.500”
Context: 1.50
N17-02Nucleus · silverGrade: 1.3Grade Unit: g/tIntercept: 1.5 mView all detailsHide details
Identity
- Hole ID
- N17-02
- Project
- Nucleus
- Commodity
- silver
- Region
- canada_yt
- Reported Region
- Yukon Territory
- Ticker
- TIG
Geometry
- Grade
- 1.3
- Grade Unit
- g/t
- Intercept
- 1.5 m
- From
- 174.5 m
- To
- 176 m
- Hole Depth
- 260.6 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- N17-02:174.5-176.0
- Mining Method
- open_pit
Location
- Easting
- 379249
- Northing
- 6913635
- CRS
- NAD83, Zone 8
- Azimuth
- 0 °
- Dip
- -50 °
- Loc. Confidence
- high
QA/QC
- Laboratory
- ALS Global
- QA/QC Disclosed
- Yes
- Lab Certified
- No
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- Yes
Compositing
- Cutoff Grade
- 0.3
- Cutoff Unit
- g/t AuEq
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2018-01-18T00:00:00.000Z
Reasoning: This infill intercept shows a low silver grade, though true width is not known.
Negative factors
- Silver grade is low.
- True width not determined.
Evidence · table
“1.3”
Context: 1.50
N17-02Nucleus · copperGrade: 0.164Grade Unit: %Intercept: 1.5 mView all detailsHide details
Identity
- Hole ID
- N17-02
- Project
- Nucleus
- Commodity
- copper
- Region
- canada_yt
- Reported Region
- Yukon Territory
- Ticker
- TIG
Geometry
- Grade
- 0.164
- Grade Unit
- %
- Intercept
- 1.5 m
- From
- 174.5 m
- To
- 176 m
- Hole Depth
- 260.6 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- N17-02:174.5-176.0
- Mining Method
- open_pit
Location
- Easting
- 379249
- Northing
- 6913635
- CRS
- NAD83, Zone 8
- Azimuth
- 0 °
- Dip
- -50 °
- Loc. Confidence
- high
QA/QC
- Laboratory
- ALS Global
- QA/QC Disclosed
- Yes
- Lab Certified
- No
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- Yes
Compositing
- Cutoff Grade
- 0.3
- Cutoff Unit
- g/t AuEq
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2018-01-18T00:00:00.000Z
Reasoning: This infill intercept shows a copper grade at the project average, though narrow and true width is not known.
Positive factors
- Copper grade (0.164%) is at the project average (0.164% Cu).
Negative factors
- Intercept length is narrow (1.5 m).
- True width not determined.
Evidence · table
“0.164”
Context: 1.50
N17-03Nucleus · goldGrade: 0.799Grade Unit: g/tIntercept: 42.14 mView all detailsHide details
Identity
- Hole ID
- N17-03
- Project
- Nucleus
- Commodity
- gold
- Region
- canada_yt
- Reported Region
- Yukon Territory
- Ticker
- TIG
Geometry
- Grade
- 0.799
- Grade Unit
- g/t
- Intercept
- 42.14 m
- From
- 47.86 m
- To
- 90 m
- Hole Depth
- 260.28 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- N17-03:47.86-90.0
- Mining Method
- open_pit
Location
- Easting
- 379250
- Northing
- 6913786
- CRS
- NAD83, Zone 8
- Azimuth
- 0 °
- Dip
- -50 °
- Loc. Confidence
- high
QA/QC
- Laboratory
- ALS Global
- QA/QC Disclosed
- Yes
- Lab Certified
- No
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- Yes
Compositing
- Cutoff Grade
- 0.3
- Cutoff Unit
- g/t AuEq
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2018-01-18T00:00:00.000Z
Reasoning: This infill intercept shows a strong gold grade over a significant width, well above the project average, enhancing resource confidence and continuity.
Positive factors
- Gold grade (0.799 g/t) is above the project average (0.502 g/t Au).
- Intercept length (42.14 m) is strong, indicating good continuity.
Negative factors
- True width not determined.
Evidence · table
“0.799”
Context: 42.14
N17-03Nucleus · silverGrade: 1.3Grade Unit: g/tIntercept: 42.14 mView all detailsHide details
Identity
- Hole ID
- N17-03
- Project
- Nucleus
- Commodity
- silver
- Region
- canada_yt
- Reported Region
- Yukon Territory
- Ticker
- TIG
Geometry
- Grade
- 1.3
- Grade Unit
- g/t
- Intercept
- 42.14 m
- From
- 47.86 m
- To
- 90 m
- Hole Depth
- 260.28 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- N17-03:47.86-90.0
- Mining Method
- open_pit
Location
- Easting
- 379250
- Northing
- 6913786
- CRS
- NAD83, Zone 8
- Azimuth
- 0 °
- Dip
- -50 °
- Loc. Confidence
- high
QA/QC
- Laboratory
- ALS Global
- QA/QC Disclosed
- Yes
- Lab Certified
- No
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- Yes
Compositing
- Cutoff Grade
- 0.3
- Cutoff Unit
- g/t AuEq
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2018-01-18T00:00:00.000Z
Reasoning: This infill intercept shows a low silver grade, though true width is not known.
Negative factors
- Silver grade is low.
- True width not determined.
Evidence · table
“1.3”
Context: 42.14
N17-03Nucleus · copperGrade: 0.137Grade Unit: %Intercept: 42.14 mView all detailsHide details
Identity
- Hole ID
- N17-03
- Project
- Nucleus
- Commodity
- copper
- Region
- canada_yt
- Reported Region
- Yukon Territory
- Ticker
- TIG
Geometry
- Grade
- 0.137
- Grade Unit
- %
- Intercept
- 42.14 m
- From
- 47.86 m
- To
- 90 m
- Hole Depth
- 260.28 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- N17-03:47.86-90.0
- Mining Method
- open_pit
Location
- Easting
- 379250
- Northing
- 6913786
- CRS
- NAD83, Zone 8
- Azimuth
- 0 °
- Dip
- -50 °
- Loc. Confidence
- high
QA/QC
- Laboratory
- ALS Global
- QA/QC Disclosed
- Yes
- Lab Certified
- No
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- Yes
Compositing
- Cutoff Grade
- 0.3
- Cutoff Unit
- g/t AuEq
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2018-01-18T00:00:00.000Z
Reasoning: This infill intercept shows a copper grade slightly below the project average over a significant width, though true width is not known.
Negative factors
- Copper grade (0.137%) is below the project average (0.164% Cu).
- True width not determined.
Evidence · table
“0.137”
Context: 42.14
N17-03Nucleus · goldGrade: 0.731Grade Unit: g/tIntercept: 13.35 mView all detailsHide details
Identity
- Hole ID
- N17-03
- Project
- Nucleus
- Commodity
- gold
- Region
- canada_yt
- Reported Region
- Yukon Territory
- Ticker
- TIG
Geometry
- Grade
- 0.731
- Grade Unit
- g/t
- Intercept
- 13.35 m
- From
- 155.65 m
- To
- 169 m
- Hole Depth
- 260.28 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- N17-03:155.65-169.0
- Mining Method
- open_pit
Location
- Easting
- 379250
- Northing
- 6913786
- CRS
- NAD83, Zone 8
- Azimuth
- 0 °
- Dip
- -50 °
- Loc. Confidence
- high
QA/QC
- Laboratory
- ALS Global
- QA/QC Disclosed
- Yes
- Lab Certified
- No
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- Yes
Compositing
- Cutoff Grade
- 0.3
- Cutoff Unit
- g/t AuEq
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2018-01-18T00:00:00.000Z
Reasoning: This infill intercept shows a gold grade above the project average, contributing positively to resource confidence, though true width is not known.
Positive factors
- Gold grade (0.731 g/t) is above the project average (0.502 g/t Au).
Negative factors
- True width not determined.
Evidence · table
“0.731”
Context: 13.35
N17-03Nucleus · silverGrade: 1.3Grade Unit: g/tIntercept: 13.35 mView all detailsHide details
Identity
- Hole ID
- N17-03
- Project
- Nucleus
- Commodity
- silver
- Region
- canada_yt
- Reported Region
- Yukon Territory
- Ticker
- TIG
Geometry
- Grade
- 1.3
- Grade Unit
- g/t
- Intercept
- 13.35 m
- From
- 155.65 m
- To
- 169 m
- Hole Depth
- 260.28 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- N17-03:155.65-169.0
- Mining Method
- open_pit
Location
- Easting
- 379250
- Northing
- 6913786
- CRS
- NAD83, Zone 8
- Azimuth
- 0 °
- Dip
- -50 °
- Loc. Confidence
- high
QA/QC
- Laboratory
- ALS Global
- QA/QC Disclosed
- Yes
- Lab Certified
- No
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- Yes
Compositing
- Cutoff Grade
- 0.3
- Cutoff Unit
- g/t AuEq
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2018-01-18T00:00:00.000Z
Reasoning: This infill intercept shows a low silver grade, though true width is not known.
Negative factors
- Silver grade is low.
- True width not determined.
Evidence · table
“1.3”
Context: 13.35
N17-03Nucleus · copperGrade: 0.079Grade Unit: %Intercept: 13.35 mView all detailsHide details
Identity
- Hole ID
- N17-03
- Project
- Nucleus
- Commodity
- copper
- Region
- canada_yt
- Reported Region
- Yukon Territory
- Ticker
- TIG
Geometry
- Grade
- 0.079
- Grade Unit
- %
- Intercept
- 13.35 m
- From
- 155.65 m
- To
- 169 m
- Hole Depth
- 260.28 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- N17-03:155.65-169.0
- Mining Method
- open_pit
Location
- Easting
- 379250
- Northing
- 6913786
- CRS
- NAD83, Zone 8
- Azimuth
- 0 °
- Dip
- -50 °
- Loc. Confidence
- high
QA/QC
- Laboratory
- ALS Global
- QA/QC Disclosed
- Yes
- Lab Certified
- No
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- Yes
Compositing
- Cutoff Grade
- 0.3
- Cutoff Unit
- g/t AuEq
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2018-01-18T00:00:00.000Z
Reasoning: This infill intercept shows a copper grade below the project average, though true width is not known.
Negative factors
- Copper grade (0.079%) is below the project average (0.164% Cu).
- True width not determined.
Evidence · table
“0.079”
Context: 13.35
N17-04Nucleus · goldGrade: 0.67Grade Unit: g/tIntercept: 23 mView all detailsHide details
Identity
- Hole ID
- N17-04
- Project
- Nucleus
- Commodity
- gold
- Region
- canada_yt
- Reported Region
- Yukon Territory
- Ticker
- TIG
Geometry
- Grade
- 0.67
- Grade Unit
- g/t
- Intercept
- 23 m
- From
- 52 m
- To
- 75 m
- Hole Depth
- 260.6 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- N17-04:52.0-75.0
- Mining Method
- open_pit
Location
- Easting
- 379467
- Northing
- 6913449
- CRS
- NAD83, Zone 8
- Azimuth
- 0 °
- Dip
- -50 °
- Loc. Confidence
- high
QA/QC
- Laboratory
- ALS Global
- QA/QC Disclosed
- Yes
- Lab Certified
- No
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- Yes
Compositing
- Cutoff Grade
- 0.3
- Cutoff Unit
- g/t AuEq
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2018-01-18T00:00:00.000Z
Reasoning: This infill intercept shows a gold grade above the project average over a moderate width, contributing positively to resource confidence, though true width is not known.
Positive factors
- Gold grade (0.670 g/t) is above the project average (0.502 g/t Au).
- Intercept length (23.0 m) is moderate.
Negative factors
- True width not determined.
Evidence · table
“0.670”
Context: 23.00
N17-04Nucleus · silverGrade: 0.7Grade Unit: g/tIntercept: 23 mView all detailsHide details
Identity
- Hole ID
- N17-04
- Project
- Nucleus
- Commodity
- silver
- Region
- canada_yt
- Reported Region
- Yukon Territory
- Ticker
- TIG
Geometry
- Grade
- 0.7
- Grade Unit
- g/t
- Intercept
- 23 m
- From
- 52 m
- To
- 75 m
- Hole Depth
- 260.6 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- N17-04:52.0-75.0
- Mining Method
- open_pit
Location
- Easting
- 379467
- Northing
- 6913449
- CRS
- NAD83, Zone 8
- Azimuth
- 0 °
- Dip
- -50 °
- Loc. Confidence
- high
QA/QC
- Laboratory
- ALS Global
- QA/QC Disclosed
- Yes
- Lab Certified
- No
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- Yes
Compositing
- Cutoff Grade
- 0.3
- Cutoff Unit
- g/t AuEq
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2018-01-18T00:00:00.000Z
Reasoning: This infill intercept shows a low silver grade, though true width is not known.
Negative factors
- Silver grade is low.
- True width not determined.
Evidence · table
“0.7”
Context: 23.00
N17-04Nucleus · copperGrade: 0.057Grade Unit: %Intercept: 23 mView all detailsHide details
Identity
- Hole ID
- N17-04
- Project
- Nucleus
- Commodity
- copper
- Region
- canada_yt
- Reported Region
- Yukon Territory
- Ticker
- TIG
Geometry
- Grade
- 0.057
- Grade Unit
- %
- Intercept
- 23 m
- From
- 52 m
- To
- 75 m
- Hole Depth
- 260.6 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- N17-04:52.0-75.0
- Mining Method
- open_pit
Location
- Easting
- 379467
- Northing
- 6913449
- CRS
- NAD83, Zone 8
- Azimuth
- 0 °
- Dip
- -50 °
- Loc. Confidence
- high
QA/QC
- Laboratory
- ALS Global
- QA/QC Disclosed
- Yes
- Lab Certified
- No
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- Yes
Compositing
- Cutoff Grade
- 0.3
- Cutoff Unit
- g/t AuEq
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2018-01-18T00:00:00.000Z
Reasoning: This infill intercept shows a very low copper grade, well below the project average, though true width is not known.
Negative factors
- Copper grade (0.057%) is well below the project average (0.164% Cu).
- True width not determined.
Evidence · table
“0.057”
Context: 23.00
N17-05Nucleus · goldGrade: 0.82Grade Unit: g/tIntercept: 18.3 mView all detailsHide details
Identity
- Hole ID
- N17-05
- Project
- Nucleus
- Commodity
- gold
- Region
- canada_yt
- Reported Region
- Yukon Territory
- Ticker
- TIG
Geometry
- Grade
- 0.82
- Grade Unit
- g/t
- Intercept
- 18.3 m
- From
- 188 m
- To
- 206.3 m
- Hole Depth
- 279.2 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- N17-05:188.0-206.3
- Mining Method
- open_pit
Location
- Easting
- 379254
- Northing
- 6913463
- CRS
- NAD83, Zone 8
- Azimuth
- 0 °
- Dip
- -50 °
- Loc. Confidence
- high
QA/QC
- Laboratory
- ALS Global
- QA/QC Disclosed
- Yes
- Lab Certified
- No
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- Yes
Compositing
- Cutoff Grade
- 0.3
- Cutoff Unit
- g/t AuEq
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2018-01-18T00:00:00.000Z
Reasoning: This infill intercept shows a gold grade above the project average over a moderate width, contributing positively to resource confidence, though true width is not known.
Positive factors
- Gold grade (0.820 g/t) is above the project average (0.502 g/t Au).
- Intercept length (18.3 m) is moderate.
Negative factors
- True width not determined.
Evidence · table
“0.820”
Context: 18.30
N17-05Nucleus · silverGrade: 0.8Grade Unit: g/tIntercept: 18.3 mView all detailsHide details
Identity
- Hole ID
- N17-05
- Project
- Nucleus
- Commodity
- silver
- Region
- canada_yt
- Reported Region
- Yukon Territory
- Ticker
- TIG
Geometry
- Grade
- 0.8
- Grade Unit
- g/t
- Intercept
- 18.3 m
- From
- 188 m
- To
- 206.3 m
- Hole Depth
- 279.2 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- N17-05:188.0-206.3
- Mining Method
- open_pit
Location
- Easting
- 379254
- Northing
- 6913463
- CRS
- NAD83, Zone 8
- Azimuth
- 0 °
- Dip
- -50 °
- Loc. Confidence
- high
QA/QC
- Laboratory
- ALS Global
- QA/QC Disclosed
- Yes
- Lab Certified
- No
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- Yes
Compositing
- Cutoff Grade
- 0.3
- Cutoff Unit
- g/t AuEq
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2018-01-18T00:00:00.000Z
Reasoning: This infill intercept shows a low silver grade, though true width is not known.
Negative factors
- Silver grade is low.
- True width not determined.
Evidence · table
“0.8”
Context: 18.30
N17-05Nucleus · copperGrade: 0.08Grade Unit: %Intercept: 18.3 mView all detailsHide details
Identity
- Hole ID
- N17-05
- Project
- Nucleus
- Commodity
- copper
- Region
- canada_yt
- Reported Region
- Yukon Territory
- Ticker
- TIG
Geometry
- Grade
- 0.08
- Grade Unit
- %
- Intercept
- 18.3 m
- From
- 188 m
- To
- 206.3 m
- Hole Depth
- 279.2 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- N17-05:188.0-206.3
- Mining Method
- open_pit
Location
- Easting
- 379254
- Northing
- 6913463
- CRS
- NAD83, Zone 8
- Azimuth
- 0 °
- Dip
- -50 °
- Loc. Confidence
- high
QA/QC
- Laboratory
- ALS Global
- QA/QC Disclosed
- Yes
- Lab Certified
- No
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- Yes
Compositing
- Cutoff Grade
- 0.3
- Cutoff Unit
- g/t AuEq
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2018-01-18T00:00:00.000Z
Reasoning: This infill intercept shows a copper grade below the project average, though true width is not known.
Negative factors
- Copper grade (0.080%) is below the project average (0.164% Cu).
- True width not determined.
Evidence · table
“0.080”
Context: 18.30
N17-07Nucleus · goldGrade: 2.696Grade Unit: g/tIntercept: 11.14 mView all detailsHide details
Identity
- Hole ID
- N17-07
- Project
- Nucleus
- Commodity
- gold
- Region
- canada_yt
- Reported Region
- Yukon Territory
- Ticker
- TIG
Geometry
- Grade
- 2.696
- Grade Unit
- g/t
- Intercept
- 11.14 m
- From
- 126.86 m
- To
- 138 m
- Hole Depth
- 259.08 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- N17-07:126.86-138.0
- Mining Method
- open_pit
Location
- Easting
- 379249
- Northing
- 6913954
- CRS
- NAD83, Zone 8
- Azimuth
- 0 °
- Dip
- -46 °
- Loc. Confidence
- high
QA/QC
- Laboratory
- ALS Global
- QA/QC Disclosed
- Yes
- Lab Certified
- No
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- Yes
Compositing
- Cutoff Grade
- 0.3
- Cutoff Unit
- g/t AuEq
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2018-01-18T00:00:00.000Z
Reasoning: This infill intercept shows a strong gold grade over a moderate width, well above the project average, enhancing resource confidence.
Positive factors
- Gold grade (2.696 g/t) is significantly above the project average (0.502 g/t Au) and strong for an open-pit deposit.
- Intercept length (11.14 m) is moderate.
Negative factors
- True width not determined.
Evidence · table
“2.696”
Context: 11.14
N17-07Nucleus · silverGrade: 2.7Grade Unit: g/tIntercept: 11.14 mView all detailsHide details
Identity
- Hole ID
- N17-07
- Project
- Nucleus
- Commodity
- silver
- Region
- canada_yt
- Reported Region
- Yukon Territory
- Ticker
- TIG
Geometry
- Grade
- 2.7
- Grade Unit
- g/t
- Intercept
- 11.14 m
- From
- 126.86 m
- To
- 138 m
- Hole Depth
- 259.08 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- N17-07:126.86-138.0
- Mining Method
- open_pit
Location
- Easting
- 379249
- Northing
- 6913954
- CRS
- NAD83, Zone 8
- Azimuth
- 0 °
- Dip
- -46 °
- Loc. Confidence
- high
QA/QC
- Laboratory
- ALS Global
- QA/QC Disclosed
- Yes
- Lab Certified
- No
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- Yes
Compositing
- Cutoff Grade
- 0.3
- Cutoff Unit
- g/t AuEq
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2018-01-18T00:00:00.000Z
Reasoning: This infill intercept shows a low silver grade, though true width is not known.
Negative factors
- Silver grade is low.
- True width not determined.
Evidence · table
“2.7”
Context: 11.14
N17-07Nucleus · copperGrade: 0.077Grade Unit: %Intercept: 11.14 mView all detailsHide details
Identity
- Hole ID
- N17-07
- Project
- Nucleus
- Commodity
- copper
- Region
- canada_yt
- Reported Region
- Yukon Territory
- Ticker
- TIG
Geometry
- Grade
- 0.077
- Grade Unit
- %
- Intercept
- 11.14 m
- From
- 126.86 m
- To
- 138 m
- Hole Depth
- 259.08 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- N17-07:126.86-138.0
- Mining Method
- open_pit
Location
- Easting
- 379249
- Northing
- 6913954
- CRS
- NAD83, Zone 8
- Azimuth
- 0 °
- Dip
- -46 °
- Loc. Confidence
- high
QA/QC
- Laboratory
- ALS Global
- QA/QC Disclosed
- Yes
- Lab Certified
- No
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- Yes
Compositing
- Cutoff Grade
- 0.3
- Cutoff Unit
- g/t AuEq
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2018-01-18T00:00:00.000Z
Reasoning: This infill intercept shows a very low copper grade, well below the project average, though true width is not known.
Negative factors
- Copper grade (0.077%) is well below the project average (0.164% Cu).
- True width not determined.
Evidence · table
“0.077”
Context: 11.14
N17-07Nucleus · goldGrade: 11.35Grade Unit: g/tIntercept: 1.44 mView all detailsHide details
Identity
- Hole ID
- N17-07
- Project
- Nucleus
- Commodity
- gold
- Region
- canada_yt
- Reported Region
- Yukon Territory
- Ticker
- TIG
Geometry
- Grade
- 11.35
- Grade Unit
- g/t
- Intercept
- 1.44 m
- From
- 132.46 m
- To
- 133.9 m
- Hole Depth
- 259.08 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- N17-07:132.46-133.9
- Mining Method
- open_pit
Location
- Easting
- 379249
- Northing
- 6913954
- CRS
- NAD83, Zone 8
- Azimuth
- 0 °
- Dip
- -46 °
- Loc. Confidence
- high
QA/QC
- Laboratory
- ALS Global
- QA/QC Disclosed
- Yes
- Lab Certified
- No
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- Yes
Compositing
- Cutoff Grade
- 0.3
- Cutoff Unit
- g/t AuEq
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2018-01-18T00:00:00.000Z
Reasoning: This bonanza-grade gold intercept, though narrow, is highly material and significantly exceeds typical grades for an open-pit deposit, enhancing the overall resource potential.
Positive factors
- Exceptional gold grade (11.35 g/t) is well above the project average and bonanza-grade for an open-pit deposit.
- This is a high-grade sub-interval within a broader mineralized zone.
Negative factors
- Intercept length is narrow (1.44 m).
- True width not determined.
Evidence · table
“11.350”
Context: 1.44
N17-07Nucleus · silverGrade: 7.3Grade Unit: g/tIntercept: 1.44 mView all detailsHide details
Identity
- Hole ID
- N17-07
- Project
- Nucleus
- Commodity
- silver
- Region
- canada_yt
- Reported Region
- Yukon Territory
- Ticker
- TIG
Geometry
- Grade
- 7.3
- Grade Unit
- g/t
- Intercept
- 1.44 m
- From
- 132.46 m
- To
- 133.9 m
- Hole Depth
- 259.08 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- N17-07:132.46-133.9
- Mining Method
- open_pit
Location
- Easting
- 379249
- Northing
- 6913954
- CRS
- NAD83, Zone 8
- Azimuth
- 0 °
- Dip
- -46 °
- Loc. Confidence
- high
QA/QC
- Laboratory
- ALS Global
- QA/QC Disclosed
- Yes
- Lab Certified
- No
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- Yes
Compositing
- Cutoff Grade
- 0.3
- Cutoff Unit
- g/t AuEq
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2018-01-18T00:00:00.000Z
Reasoning: This infill intercept shows a low silver grade, though true width is not known.
Negative factors
- Silver grade is low.
- True width not determined.
Evidence · table
“7.3”
Context: 1.44
N17-07Nucleus · copperGrade: 0.2Grade Unit: %Intercept: 1.44 mView all detailsHide details
Identity
- Hole ID
- N17-07
- Project
- Nucleus
- Commodity
- copper
- Region
- canada_yt
- Reported Region
- Yukon Territory
- Ticker
- TIG
Geometry
- Grade
- 0.2
- Grade Unit
- %
- Intercept
- 1.44 m
- From
- 132.46 m
- To
- 133.9 m
- Hole Depth
- 259.08 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- N17-07:132.46-133.9
- Mining Method
- open_pit
Location
- Easting
- 379249
- Northing
- 6913954
- CRS
- NAD83, Zone 8
- Azimuth
- 0 °
- Dip
- -46 °
- Loc. Confidence
- high
QA/QC
- Laboratory
- ALS Global
- QA/QC Disclosed
- Yes
- Lab Certified
- No
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- Yes
Compositing
- Cutoff Grade
- 0.3
- Cutoff Unit
- g/t AuEq
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2018-01-18T00:00:00.000Z
Reasoning: This infill intercept shows a copper grade near the project's best, though narrow and true width is not known.
Positive factors
- Copper grade (0.200%) is near the project's best grade (0.22% Cu).
Negative factors
- Intercept length is narrow (1.44 m).
- True width not determined.
Evidence · table
“0.200”
Context: 1.44
N17-12Nucleus · goldGrade: 1.797Grade Unit: g/tIntercept: 17.73 mView all detailsHide details
Identity
- Hole ID
- N17-12
- Project
- Nucleus
- Commodity
- gold
- Region
- canada_yt
- Reported Region
- Yukon Territory
- Ticker
- TIG
Geometry
- Grade
- 1.797
- Grade Unit
- g/t
- Intercept
- 17.73 m
- From
- 99 m
- To
- 116.73 m
- Hole Depth
- 260.6 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- N17-12:99.0-116.73
- Mining Method
- open_pit
Location
- Easting
- 379253
- Northing
- 6913284
- CRS
- NAD83, Zone 8
- Azimuth
- 0 °
- Dip
- -50 °
- Loc. Confidence
- high
QA/QC
- Laboratory
- ALS Global
- QA/QC Disclosed
- Yes
- Lab Certified
- No
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- Yes
Compositing
- Cutoff Grade
- 0.3
- Cutoff Unit
- g/t AuEq
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2018-01-18T00:00:00.000Z
Reasoning: This infill intercept shows a strong gold grade over a moderate width, well above the project average, enhancing resource confidence.
Positive factors
- Gold grade (1.797 g/t) is significantly above the project average (0.502 g/t Au).
- Intercept length (17.73 m) is moderate.
Negative factors
- True width not determined.
Evidence · table
“1.797”
Context: 17.73
N17-12Nucleus · silverGrade: 2.1Grade Unit: g/tIntercept: 17.73 mView all detailsHide details
Identity
- Hole ID
- N17-12
- Project
- Nucleus
- Commodity
- silver
- Region
- canada_yt
- Reported Region
- Yukon Territory
- Ticker
- TIG
Geometry
- Grade
- 2.1
- Grade Unit
- g/t
- Intercept
- 17.73 m
- From
- 99 m
- To
- 116.73 m
- Hole Depth
- 260.6 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- N17-12:99.0-116.73
- Mining Method
- open_pit
Location
- Easting
- 379253
- Northing
- 6913284
- CRS
- NAD83, Zone 8
- Azimuth
- 0 °
- Dip
- -50 °
- Loc. Confidence
- high
QA/QC
- Laboratory
- ALS Global
- QA/QC Disclosed
- Yes
- Lab Certified
- No
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- Yes
Compositing
- Cutoff Grade
- 0.3
- Cutoff Unit
- g/t AuEq
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2018-01-18T00:00:00.000Z
Reasoning: This infill intercept shows a low silver grade, though true width is not known.
Negative factors
- Silver grade is low.
- True width not determined.
Evidence · table
“2.1”
Context: 17.73
N17-12Nucleus · copperGrade: 0.046Grade Unit: %Intercept: 17.73 mView all detailsHide details
Identity
- Hole ID
- N17-12
- Project
- Nucleus
- Commodity
- copper
- Region
- canada_yt
- Reported Region
- Yukon Territory
- Ticker
- TIG
Geometry
- Grade
- 0.046
- Grade Unit
- %
- Intercept
- 17.73 m
- From
- 99 m
- To
- 116.73 m
- Hole Depth
- 260.6 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- N17-12:99.0-116.73
- Mining Method
- open_pit
Location
- Easting
- 379253
- Northing
- 6913284
- CRS
- NAD83, Zone 8
- Azimuth
- 0 °
- Dip
- -50 °
- Loc. Confidence
- high
QA/QC
- Laboratory
- ALS Global
- QA/QC Disclosed
- Yes
- Lab Certified
- No
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- Yes
Compositing
- Cutoff Grade
- 0.3
- Cutoff Unit
- g/t AuEq
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2018-01-18T00:00:00.000Z
Reasoning: This infill intercept shows a very low copper grade, well below the project average, though true width is not known.
Negative factors
- Copper grade (0.046%) is well below the project average (0.164% Cu).
- True width not determined.
Evidence · table
“0.046”
Context: 17.73
N17-12Nucleus · goldGrade: 10.2Grade Unit: g/tIntercept: 1.1 mView all detailsHide details
Identity
- Hole ID
- N17-12
- Project
- Nucleus
- Commodity
- gold
- Region
- canada_yt
- Reported Region
- Yukon Territory
- Ticker
- TIG
Geometry
- Grade
- 10.2
- Grade Unit
- g/t
- Intercept
- 1.1 m
- From
- 111 m
- To
- 112.1 m
- Hole Depth
- 260.6 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- N17-12:111.0-112.1
- Mining Method
- open_pit
Location
- Easting
- 379253
- Northing
- 6913284
- CRS
- NAD83, Zone 8
- Azimuth
- 0 °
- Dip
- -50 °
- Loc. Confidence
- high
QA/QC
- Laboratory
- ALS Global
- QA/QC Disclosed
- Yes
- Lab Certified
- No
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- Yes
Compositing
- Cutoff Grade
- 0.3
- Cutoff Unit
- g/t AuEq
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2018-01-18T00:00:00.000Z
Reasoning: This bonanza-grade gold intercept, though narrow, is highly material and significantly exceeds typical grades for an open-pit deposit, enhancing the overall resource potential.
Positive factors
- Exceptional gold grade (10.2 g/t) is well above the project average and bonanza-grade for an open-pit deposit.
- This is a high-grade sub-interval within a broader mineralized zone.
Negative factors
- Intercept length is narrow (1.1 m).
- True width not determined.
Evidence · table
“10.200”
Context: 1.10
N17-12Nucleus · silverGrade: 0.7Grade Unit: g/tIntercept: 1.1 mView all detailsHide details
Identity
- Hole ID
- N17-12
- Project
- Nucleus
- Commodity
- silver
- Region
- canada_yt
- Reported Region
- Yukon Territory
- Ticker
- TIG
Geometry
- Grade
- 0.7
- Grade Unit
- g/t
- Intercept
- 1.1 m
- From
- 111 m
- To
- 112.1 m
- Hole Depth
- 260.6 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- N17-12:111.0-112.1
- Mining Method
- open_pit
Location
- Easting
- 379253
- Northing
- 6913284
- CRS
- NAD83, Zone 8
- Azimuth
- 0 °
- Dip
- -50 °
- Loc. Confidence
- high
QA/QC
- Laboratory
- ALS Global
- QA/QC Disclosed
- Yes
- Lab Certified
- No
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- Yes
Compositing
- Cutoff Grade
- 0.3
- Cutoff Unit
- g/t AuEq
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2018-01-18T00:00:00.000Z
Reasoning: This infill intercept shows a low silver grade, though true width is not known.
Negative factors
- Silver grade is low.
- True width not determined.
Evidence · table
“0.7”
Context: 1.10
N17-12Nucleus · copperGrade: 0.03Grade Unit: %Intercept: 1.1 mView all detailsHide details
Identity
- Hole ID
- N17-12
- Project
- Nucleus
- Commodity
- copper
- Region
- canada_yt
- Reported Region
- Yukon Territory
- Ticker
- TIG
Geometry
- Grade
- 0.03
- Grade Unit
- %
- Intercept
- 1.1 m
- From
- 111 m
- To
- 112.1 m
- Hole Depth
- 260.6 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- N17-12:111.0-112.1
- Mining Method
- open_pit
Location
- Easting
- 379253
- Northing
- 6913284
- CRS
- NAD83, Zone 8
- Azimuth
- 0 °
- Dip
- -50 °
- Loc. Confidence
- high
QA/QC
- Laboratory
- ALS Global
- QA/QC Disclosed
- Yes
- Lab Certified
- No
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- Yes
Compositing
- Cutoff Grade
- 0.3
- Cutoff Unit
- g/t AuEq
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2018-01-18T00:00:00.000Z
Reasoning: This infill intercept shows a very low copper grade, well below the project average, though true width is not known.
Negative factors
- Copper grade (0.030%) is well below the project average (0.164% Cu).
- True width not determined.
Evidence · table
“0.030”
Context: 1.10
N17-12Nucleus · goldGrade: 0.701Grade Unit: g/tIntercept: 30 mView all detailsHide details
Identity
- Hole ID
- N17-12
- Project
- Nucleus
- Commodity
- gold
- Region
- canada_yt
- Reported Region
- Yukon Territory
- Ticker
- TIG
Geometry
- Grade
- 0.701
- Grade Unit
- g/t
- Intercept
- 30 m
- From
- 212 m
- To
- 242 m
- Hole Depth
- 260.6 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- N17-12:212.0-242.0
- Mining Method
- open_pit
Location
- Easting
- 379253
- Northing
- 6913284
- CRS
- NAD83, Zone 8
- Azimuth
- 0 °
- Dip
- -50 °
- Loc. Confidence
- high
QA/QC
- Laboratory
- ALS Global
- QA/QC Disclosed
- Yes
- Lab Certified
- No
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- Yes
Compositing
- Cutoff Grade
- 0.3
- Cutoff Unit
- g/t AuEq
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2018-01-18T00:00:00.000Z
Reasoning: This infill intercept shows a strong gold grade over a significant width, well above the project average, enhancing resource confidence and continuity.
Positive factors
- Gold grade (0.701 g/t) is above the project average (0.502 g/t Au).
- Intercept length (30.0 m) is strong, indicating good continuity.
Negative factors
- True width not determined.
Evidence · table
“0.701”
Context: 30.00
N17-12Nucleus · silverGrade: 1Grade Unit: g/tIntercept: 30 mView all detailsHide details
Identity
- Hole ID
- N17-12
- Project
- Nucleus
- Commodity
- silver
- Region
- canada_yt
- Reported Region
- Yukon Territory
- Ticker
- TIG
Geometry
- Grade
- 1
- Grade Unit
- g/t
- Intercept
- 30 m
- From
- 212 m
- To
- 242 m
- Hole Depth
- 260.6 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- N17-12:212.0-242.0
- Mining Method
- open_pit
Location
- Easting
- 379253
- Northing
- 6913284
- CRS
- NAD83, Zone 8
- Azimuth
- 0 °
- Dip
- -50 °
- Loc. Confidence
- high
QA/QC
- Laboratory
- ALS Global
- QA/QC Disclosed
- Yes
- Lab Certified
- No
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- Yes
Compositing
- Cutoff Grade
- 0.3
- Cutoff Unit
- g/t AuEq
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2018-01-18T00:00:00.000Z
Reasoning: This infill intercept shows a low silver grade, though true width is not known.
Negative factors
- Silver grade is low.
- True width not determined.
Evidence · table
“1.0”
Context: 30.00
N17-12Nucleus · copperGrade: 0.059Grade Unit: %Intercept: 30 mView all detailsHide details
Identity
- Hole ID
- N17-12
- Project
- Nucleus
- Commodity
- copper
- Region
- canada_yt
- Reported Region
- Yukon Territory
- Ticker
- TIG
Geometry
- Grade
- 0.059
- Grade Unit
- %
- Intercept
- 30 m
- From
- 212 m
- To
- 242 m
- Hole Depth
- 260.6 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- N17-12:212.0-242.0
- Mining Method
- open_pit
Location
- Easting
- 379253
- Northing
- 6913284
- CRS
- NAD83, Zone 8
- Azimuth
- 0 °
- Dip
- -50 °
- Loc. Confidence
- high
QA/QC
- Laboratory
- ALS Global
- QA/QC Disclosed
- Yes
- Lab Certified
- No
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- Yes
Compositing
- Cutoff Grade
- 0.3
- Cutoff Unit
- g/t AuEq
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2018-01-18T00:00:00.000Z
Reasoning: This infill intercept shows a very low copper grade, well below the project average, though true width is not known.
Negative factors
- Copper grade (0.059%) is well below the project average (0.164% Cu).
- True width not determined.
Evidence · table
“0.059”
Context: 30.00
N17-01Nucleus · goldGrade: 0.969Grade Unit: g/tIntercept: 14.62 mView all detailsHide details
Identity
- Hole ID
- N17-01
- Project
- Nucleus
- Commodity
- gold
- Region
- canada_yt
- Reported Region
- Yukon Territory
- Ticker
- TIG
Geometry
- Grade
- 0.969
- Grade Unit
- g/t
- Intercept
- 14.62 m
- From
- 24.38 m
- To
- 39 m
- Hole Depth
- 283.46 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- N17-01:24.38-39.0
- Mining Method
- open_pit
Location
- Easting
- 379462
- Northing
- 6913291
- CRS
- NAD83, Zone 8
- Azimuth
- 0 °
- Dip
- -50 °
- Loc. Confidence
- high
QA/QC
- Laboratory
- ALS Global
- QA/QC Disclosed
- Yes
- Lab Certified
- No
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- Yes
Compositing
- Cutoff Grade
- 0.3
- Cutoff Unit
- g/t AuEq
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2018-01-18T00:00:00.000Z
Reasoning: This step-out intercept shows a strong gold grade over a moderate width, well above the project average, confirming potential for resource expansion.
Positive factors
- Gold grade (0.969 g/t) is significantly above the project average (0.502 g/t Au).
- This is a step-out intercept, indicating potential for resource expansion.
Negative factors
- True width not determined.
Evidence · table
“0.969”
Context: 14.62
N17-01Nucleus · silverGrade: 1.7Grade Unit: g/tIntercept: 14.62 mView all detailsHide details
Identity
- Hole ID
- N17-01
- Project
- Nucleus
- Commodity
- silver
- Region
- canada_yt
- Reported Region
- Yukon Territory
- Ticker
- TIG
Geometry
- Grade
- 1.7
- Grade Unit
- g/t
- Intercept
- 14.62 m
- From
- 24.38 m
- To
- 39 m
- Hole Depth
- 283.46 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- N17-01:24.38-39.0
- Mining Method
- open_pit
Location
- Easting
- 379462
- Northing
- 6913291
- CRS
- NAD83, Zone 8
- Azimuth
- 0 °
- Dip
- -50 °
- Loc. Confidence
- high
QA/QC
- Laboratory
- ALS Global
- QA/QC Disclosed
- Yes
- Lab Certified
- No
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- Yes
Compositing
- Cutoff Grade
- 0.3
- Cutoff Unit
- g/t AuEq
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2018-01-18T00:00:00.000Z
Reasoning: This step-out intercept shows a low silver grade, though true width is not known.
Negative factors
- Silver grade is low.
- True width not determined.
Evidence · table
“1.7”
Context: 14.62
N17-01Nucleus · copperGrade: 0.046Grade Unit: %Intercept: 14.62 mView all detailsHide details
Identity
- Hole ID
- N17-01
- Project
- Nucleus
- Commodity
- copper
- Region
- canada_yt
- Reported Region
- Yukon Territory
- Ticker
- TIG
Geometry
- Grade
- 0.046
- Grade Unit
- %
- Intercept
- 14.62 m
- From
- 24.38 m
- To
- 39 m
- Hole Depth
- 283.46 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- N17-01:24.38-39.0
- Mining Method
- open_pit
Location
- Easting
- 379462
- Northing
- 6913291
- CRS
- NAD83, Zone 8
- Azimuth
- 0 °
- Dip
- -50 °
- Loc. Confidence
- high
QA/QC
- Laboratory
- ALS Global
- QA/QC Disclosed
- Yes
- Lab Certified
- No
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- Yes
Compositing
- Cutoff Grade
- 0.3
- Cutoff Unit
- g/t AuEq
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2018-01-18T00:00:00.000Z
Reasoning: This step-out intercept shows a very low copper grade, well below the project average, though true width is not known.
Negative factors
- Copper grade (0.046%) is well below the project average (0.164% Cu).
- True width not determined.
Evidence · table
“0.046”
Context: 14.62
N17-01Nucleus · goldGrade: 1.005Grade Unit: g/tIntercept: 12 mView all detailsHide details
Identity
- Hole ID
- N17-01
- Project
- Nucleus
- Commodity
- gold
- Region
- canada_yt
- Reported Region
- Yukon Territory
- Ticker
- TIG
Geometry
- Grade
- 1.005
- Grade Unit
- g/t
- Intercept
- 12 m
- From
- 165 m
- To
- 177 m
- Hole Depth
- 283.46 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- N17-01:165.0-177.0
- Mining Method
- open_pit
Location
- Easting
- 379462
- Northing
- 6913291
- CRS
- NAD83, Zone 8
- Azimuth
- 0 °
- Dip
- -50 °
- Loc. Confidence
- high
QA/QC
- Laboratory
- ALS Global
- QA/QC Disclosed
- Yes
- Lab Certified
- No
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- Yes
Compositing
- Cutoff Grade
- 0.3
- Cutoff Unit
- g/t AuEq
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2018-01-18T00:00:00.000Z
Reasoning: This step-out intercept shows a strong gold grade over a moderate width, well above the project average, confirming potential for resource expansion.
Positive factors
- Gold grade (1.005 g/t) is significantly above the project average (0.502 g/t Au).
- This is a step-out intercept, indicating potential for resource expansion.
Negative factors
- True width not determined.
Evidence · table
“1.005”
Context: 12.00
N17-01Nucleus · silverGrade: 0.6Grade Unit: g/tIntercept: 12 mView all detailsHide details
Identity
- Hole ID
- N17-01
- Project
- Nucleus
- Commodity
- silver
- Region
- canada_yt
- Reported Region
- Yukon Territory
- Ticker
- TIG
Geometry
- Grade
- 0.6
- Grade Unit
- g/t
- Intercept
- 12 m
- From
- 165 m
- To
- 177 m
- Hole Depth
- 283.46 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- N17-01:165.0-177.0
- Mining Method
- open_pit
Location
- Easting
- 379462
- Northing
- 6913291
- CRS
- NAD83, Zone 8
- Azimuth
- 0 °
- Dip
- -50 °
- Loc. Confidence
- high
QA/QC
- Laboratory
- ALS Global
- QA/QC Disclosed
- Yes
- Lab Certified
- No
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- Yes
Compositing
- Cutoff Grade
- 0.3
- Cutoff Unit
- g/t AuEq
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2018-01-18T00:00:00.000Z
Reasoning: This step-out intercept shows a low silver grade, though true width is not known.
Negative factors
- Silver grade is low.
- True width not determined.
Evidence · table
“0.6”
Context: 12.00
N17-01Nucleus · copperGrade: 0.045Grade Unit: %Intercept: 12 mView all detailsHide details
Identity
- Hole ID
- N17-01
- Project
- Nucleus
- Commodity
- copper
- Region
- canada_yt
- Reported Region
- Yukon Territory
- Ticker
- TIG
Geometry
- Grade
- 0.045
- Grade Unit
- %
- Intercept
- 12 m
- From
- 165 m
- To
- 177 m
- Hole Depth
- 283.46 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- N17-01:165.0-177.0
- Mining Method
- open_pit
Location
- Easting
- 379462
- Northing
- 6913291
- CRS
- NAD83, Zone 8
- Azimuth
- 0 °
- Dip
- -50 °
- Loc. Confidence
- high
QA/QC
- Laboratory
- ALS Global
- QA/QC Disclosed
- Yes
- Lab Certified
- No
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- Yes
Compositing
- Cutoff Grade
- 0.3
- Cutoff Unit
- g/t AuEq
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2018-01-18T00:00:00.000Z
Reasoning: This step-out intercept shows a very low copper grade, well below the project average, though true width is not known.
Negative factors
- Copper grade (0.045%) is well below the project average (0.164% Cu).
- True width not determined.
Evidence · table
“0.045”
Context: 12.00
N17-06ANucleus · goldGrade: 0.781Grade Unit: g/tIntercept: 9 mView all detailsHide details
Identity
- Hole ID
- N17-06A
- Project
- Nucleus
- Commodity
- gold
- Region
- canada_yt
- Reported Region
- Yukon Territory
- Ticker
- TIG
Geometry
- Grade
- 0.781
- Grade Unit
- g/t
- Intercept
- 9 m
- From
- 42 m
- To
- 51 m
- Hole Depth
- 97.54 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- N17-06A:42.0-51.0
- Mining Method
- open_pit
Location
- Easting
- 379600
- Northing
- 6913583
- CRS
- NAD83, Zone 8
- Azimuth
- 0 °
- Dip
- -50 °
- Loc. Confidence
- high
QA/QC
- Laboratory
- ALS Global
- QA/QC Disclosed
- Yes
- Lab Certified
- No
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- Yes
Compositing
- Cutoff Grade
- 0.3
- Cutoff Unit
- g/t AuEq
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2018-01-18T00:00:00.000Z
Reasoning: This step-out intercept shows a gold grade above the project average, confirming potential for resource expansion, though true width is not known.
Positive factors
- Gold grade (0.781 g/t) is above the project average (0.502 g/t Au).
- This is a step-out intercept, indicating potential for resource expansion.
Negative factors
- True width not determined.
Evidence · table
“0.781”
Context: 9.00
N17-06ANucleus · silverGrade: 6.5Grade Unit: g/tIntercept: 9 mView all detailsHide details
Identity
- Hole ID
- N17-06A
- Project
- Nucleus
- Commodity
- silver
- Region
- canada_yt
- Reported Region
- Yukon Territory
- Ticker
- TIG
Geometry
- Grade
- 6.5
- Grade Unit
- g/t
- Intercept
- 9 m
- From
- 42 m
- To
- 51 m
- Hole Depth
- 97.54 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- N17-06A:42.0-51.0
- Mining Method
- open_pit
Location
- Easting
- 379600
- Northing
- 6913583
- CRS
- NAD83, Zone 8
- Azimuth
- 0 °
- Dip
- -50 °
- Loc. Confidence
- high
QA/QC
- Laboratory
- ALS Global
- QA/QC Disclosed
- Yes
- Lab Certified
- No
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- Yes
Compositing
- Cutoff Grade
- 0.3
- Cutoff Unit
- g/t AuEq
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2018-01-18T00:00:00.000Z
Reasoning: This step-out intercept shows a low silver grade, though true width is not known.
Negative factors
- Silver grade is low.
- True width not determined.
Evidence · table
“6.5”
Context: 9.00
N17-06ANucleus · copperGrade: 0.323Grade Unit: %Intercept: 9 mView all detailsHide details
Identity
- Hole ID
- N17-06A
- Project
- Nucleus
- Commodity
- copper
- Region
- canada_yt
- Reported Region
- Yukon Territory
- Ticker
- TIG
Geometry
- Grade
- 0.323
- Grade Unit
- %
- Intercept
- 9 m
- From
- 42 m
- To
- 51 m
- Hole Depth
- 97.54 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- N17-06A:42.0-51.0
- Mining Method
- open_pit
Location
- Easting
- 379600
- Northing
- 6913583
- CRS
- NAD83, Zone 8
- Azimuth
- 0 °
- Dip
- -50 °
- Loc. Confidence
- high
QA/QC
- Laboratory
- ALS Global
- QA/QC Disclosed
- Yes
- Lab Certified
- No
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- Yes
Compositing
- Cutoff Grade
- 0.3
- Cutoff Unit
- g/t AuEq
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2018-01-18T00:00:00.000Z
Reasoning: This step-out intercept shows a strong copper grade, exceeding prior best results and the project average, confirming potential for resource expansion, though true width is not known.
Positive factors
- Copper grade (0.323%) is significantly above the project average (0.164% Cu) and exceeds the project's best prior grade (0.22% Cu).
- This is a step-out intercept, indicating potential for resource expansion.
Negative factors
- True width not determined.
Evidence · table
“0.323”
Context: 9.00
N17-06ANucleus · goldGrade: 0.485Grade Unit: g/tIntercept: 29.2 mView all detailsHide details
Identity
- Hole ID
- N17-06A
- Project
- Nucleus
- Commodity
- gold
- Region
- canada_yt
- Reported Region
- Yukon Territory
- Ticker
- TIG
Geometry
- Grade
- 0.485
- Grade Unit
- g/t
- Intercept
- 29.2 m
- From
- 66.8 m
- To
- 96 m
- Hole Depth
- 97.54 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- N17-06A:66.8-96.0
- Mining Method
- open_pit
Location
- Easting
- 379600
- Northing
- 6913583
- CRS
- NAD83, Zone 8
- Azimuth
- 0 °
- Dip
- -50 °
- Loc. Confidence
- high
QA/QC
- Laboratory
- ALS Global
- QA/QC Disclosed
- Yes
- Lab Certified
- No
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- Yes
Compositing
- Cutoff Grade
- 0.3
- Cutoff Unit
- g/t AuEq
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2018-01-18T00:00:00.000Z
Reasoning: This step-out intercept shows a significant width with a gold grade slightly below the project average, confirming potential for resource expansion, though true width is not known.
Positive factors
- Intercept length (29.2 m) is strong, indicating good continuity.
- This is a step-out intercept, indicating potential for resource expansion.
Negative factors
- Gold grade (0.485 g/t) is slightly below the project average (0.502 g/t Au).
- True width not determined.
Evidence · table
“0.485”
Context: 29.20
N17-06ANucleus · silverGrade: 2Grade Unit: g/tIntercept: 29.2 mView all detailsHide details
Identity
- Hole ID
- N17-06A
- Project
- Nucleus
- Commodity
- silver
- Region
- canada_yt
- Reported Region
- Yukon Territory
- Ticker
- TIG
Geometry
- Grade
- 2
- Grade Unit
- g/t
- Intercept
- 29.2 m
- From
- 66.8 m
- To
- 96 m
- Hole Depth
- 97.54 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- N17-06A:66.8-96.0
- Mining Method
- open_pit
Location
- Easting
- 379600
- Northing
- 6913583
- CRS
- NAD83, Zone 8
- Azimuth
- 0 °
- Dip
- -50 °
- Loc. Confidence
- high
QA/QC
- Laboratory
- ALS Global
- QA/QC Disclosed
- Yes
- Lab Certified
- No
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- Yes
Compositing
- Cutoff Grade
- 0.3
- Cutoff Unit
- g/t AuEq
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2018-01-18T00:00:00.000Z
Reasoning: This step-out intercept shows a low silver grade, though true width is not known.
Negative factors
- Silver grade is low.
- True width not determined.
Evidence · table
“2.0”
Context: 29.20
N17-06ANucleus · copperGrade: 0.185Grade Unit: %Intercept: 29.2 mView all detailsHide details
Identity
- Hole ID
- N17-06A
- Project
- Nucleus
- Commodity
- copper
- Region
- canada_yt
- Reported Region
- Yukon Territory
- Ticker
- TIG
Geometry
- Grade
- 0.185
- Grade Unit
- %
- Intercept
- 29.2 m
- From
- 66.8 m
- To
- 96 m
- Hole Depth
- 97.54 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- N17-06A:66.8-96.0
- Mining Method
- open_pit
Location
- Easting
- 379600
- Northing
- 6913583
- CRS
- NAD83, Zone 8
- Azimuth
- 0 °
- Dip
- -50 °
- Loc. Confidence
- high
QA/QC
- Laboratory
- ALS Global
- QA/QC Disclosed
- Yes
- Lab Certified
- No
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- Yes
Compositing
- Cutoff Grade
- 0.3
- Cutoff Unit
- g/t AuEq
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2018-01-18T00:00:00.000Z
Reasoning: This step-out intercept shows a copper grade above the project average over a significant width, confirming potential for resource expansion, though true width is not known.
Positive factors
- Copper grade (0.185%) is above the project average (0.164% Cu).
- Intercept length (29.2 m) is strong, indicating good continuity.
- This is a step-out intercept, indicating potential for resource expansion.
Negative factors
- True width not determined.
Evidence · table
“0.185”
Context: 29.20
N17-08Nucleus · goldGrade: 0.606Grade Unit: g/tIntercept: 13.5 mView all detailsHide details
Identity
- Hole ID
- N17-08
- Project
- Nucleus
- Commodity
- gold
- Region
- canada_yt
- Reported Region
- Yukon Territory
- Ticker
- TIG
Geometry
- Grade
- 0.606
- Grade Unit
- g/t
- Intercept
- 13.5 m
- From
- 95.5 m
- To
- 109 m
- Hole Depth
- 272.49 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- N17-08:95.5-109.0
- Mining Method
- open_pit
Location
- Easting
- 379251
- Northing
- 6914125
- CRS
- NAD83, Zone 8
- Azimuth
- 0 °
- Dip
- -50 °
- Loc. Confidence
- high
QA/QC
- Laboratory
- ALS Global
- QA/QC Disclosed
- Yes
- Lab Certified
- No
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- Yes
Compositing
- Cutoff Grade
- 0.3
- Cutoff Unit
- g/t AuEq
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2018-01-18T00:00:00.000Z
Reasoning: This step-out intercept shows a gold grade above the project average, confirming potential for resource expansion, though true width is not known.
Positive factors
- Gold grade (0.606 g/t) is above the project average (0.502 g/t Au).
- This is a step-out intercept, indicating potential for resource expansion.
Negative factors
- True width not determined.
Evidence · table
“0.606”
Context: 13.50
N17-08Nucleus · silverGrade: 2.9Grade Unit: g/tIntercept: 13.5 mView all detailsHide details
Identity
- Hole ID
- N17-08
- Project
- Nucleus
- Commodity
- silver
- Region
- canada_yt
- Reported Region
- Yukon Territory
- Ticker
- TIG
Geometry
- Grade
- 2.9
- Grade Unit
- g/t
- Intercept
- 13.5 m
- From
- 95.5 m
- To
- 109 m
- Hole Depth
- 272.49 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- N17-08:95.5-109.0
- Mining Method
- open_pit
Location
- Easting
- 379251
- Northing
- 6914125
- CRS
- NAD83, Zone 8
- Azimuth
- 0 °
- Dip
- -50 °
- Loc. Confidence
- high
QA/QC
- Laboratory
- ALS Global
- QA/QC Disclosed
- Yes
- Lab Certified
- No
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- Yes
Compositing
- Cutoff Grade
- 0.3
- Cutoff Unit
- g/t AuEq
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2018-01-18T00:00:00.000Z
Reasoning: This step-out intercept shows a low silver grade, though true width is not known.
Negative factors
- Silver grade is low.
- True width not determined.
Evidence · table
“2.9”
Context: 13.50
N17-08Nucleus · copperGrade: 0.07Grade Unit: %Intercept: 13.5 mView all detailsHide details
Identity
- Hole ID
- N17-08
- Project
- Nucleus
- Commodity
- copper
- Region
- canada_yt
- Reported Region
- Yukon Territory
- Ticker
- TIG
Geometry
- Grade
- 0.07
- Grade Unit
- %
- Intercept
- 13.5 m
- From
- 95.5 m
- To
- 109 m
- Hole Depth
- 272.49 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- N17-08:95.5-109.0
- Mining Method
- open_pit
Location
- Easting
- 379251
- Northing
- 6914125
- CRS
- NAD83, Zone 8
- Azimuth
- 0 °
- Dip
- -50 °
- Loc. Confidence
- high
QA/QC
- Laboratory
- ALS Global
- QA/QC Disclosed
- Yes
- Lab Certified
- No
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- Yes
Compositing
- Cutoff Grade
- 0.3
- Cutoff Unit
- g/t AuEq
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2018-01-18T00:00:00.000Z
Reasoning: This step-out intercept shows a very low copper grade, well below the project average, though true width is not known.
Negative factors
- Copper grade (0.070%) is well below the project average (0.164% Cu).
- True width not determined.
Evidence · table
“0.070”
Context: 13.50
N17-09Nucleus · goldGrade: 0.159Grade Unit: g/tIntercept: 21.5 mView all detailsHide details
Identity
- Hole ID
- N17-09
- Project
- Nucleus
- Commodity
- gold
- Region
- canada_yt
- Reported Region
- Yukon Territory
- Ticker
- TIG
Geometry
- Grade
- 0.159
- Grade Unit
- g/t
- Intercept
- 21.5 m
- From
- 38 m
- To
- 59.5 m
- Hole Depth
- 260.6 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- N17-09:38.0-59.5
- Mining Method
- open_pit
Location
- Easting
- 379664
- Northing
- 6913659
- CRS
- NAD83, Zone 8
- Azimuth
- 270 °
- Dip
- -50 °
- Loc. Confidence
- high
QA/QC
- Laboratory
- ALS Global
- QA/QC Disclosed
- Yes
- Lab Certified
- No
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- Yes
Compositing
- Cutoff Grade
- 0.3
- Cutoff Unit
- g/t AuEq
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2018-01-18T00:00:00.000Z
Reasoning: This step-out intercept shows a gold grade well below the project average, despite a moderate width, which is a negative for resource expansion, though true width is not known.
Positive factors
- Intercept length (21.5 m) is moderate.
- This is a step-out intercept, indicating potential for resource expansion.
Negative factors
- Gold grade (0.159 g/t) is well below the project average (0.502 g/t Au).
- True width not determined.
Evidence · table
“0.159”
Context: 21.50
N17-09Nucleus · silverGrade: 1.9Grade Unit: g/tIntercept: 21.5 mView all detailsHide details
Identity
- Hole ID
- N17-09
- Project
- Nucleus
- Commodity
- silver
- Region
- canada_yt
- Reported Region
- Yukon Territory
- Ticker
- TIG
Geometry
- Grade
- 1.9
- Grade Unit
- g/t
- Intercept
- 21.5 m
- From
- 38 m
- To
- 59.5 m
- Hole Depth
- 260.6 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- N17-09:38.0-59.5
- Mining Method
- open_pit
Location
- Easting
- 379664
- Northing
- 6913659
- CRS
- NAD83, Zone 8
- Azimuth
- 270 °
- Dip
- -50 °
- Loc. Confidence
- high
QA/QC
- Laboratory
- ALS Global
- QA/QC Disclosed
- Yes
- Lab Certified
- No
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- Yes
Compositing
- Cutoff Grade
- 0.3
- Cutoff Unit
- g/t AuEq
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2018-01-18T00:00:00.000Z
Reasoning: This step-out intercept shows a low silver grade, though true width is not known.
Negative factors
- Silver grade is low.
- True width not determined.
Evidence · table
“1.9”
Context: 21.50
N17-09Nucleus · copperGrade: 0.208Grade Unit: %Intercept: 21.5 mView all detailsHide details
Identity
- Hole ID
- N17-09
- Project
- Nucleus
- Commodity
- copper
- Region
- canada_yt
- Reported Region
- Yukon Territory
- Ticker
- TIG
Geometry
- Grade
- 0.208
- Grade Unit
- %
- Intercept
- 21.5 m
- From
- 38 m
- To
- 59.5 m
- Hole Depth
- 260.6 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- N17-09:38.0-59.5
- Mining Method
- open_pit
Location
- Easting
- 379664
- Northing
- 6913659
- CRS
- NAD83, Zone 8
- Azimuth
- 270 °
- Dip
- -50 °
- Loc. Confidence
- high
QA/QC
- Laboratory
- ALS Global
- QA/QC Disclosed
- Yes
- Lab Certified
- No
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- Yes
Compositing
- Cutoff Grade
- 0.3
- Cutoff Unit
- g/t AuEq
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2018-01-18T00:00:00.000Z
Reasoning: This step-out intercept shows a copper grade above the project average over a moderate width, confirming potential for resource expansion, though true width is not known.
Positive factors
- Copper grade (0.208%) is above the project average (0.164% Cu).
- Intercept length (21.5 m) is moderate.
- This is a step-out intercept, indicating potential for resource expansion.
Negative factors
- True width not determined.
Evidence · table
“0.208”
Context: 21.50
N17-13Nucleus · goldGrade: 0.381Grade Unit: g/tIntercept: 49.5 mView all detailsHide details
Identity
- Hole ID
- N17-13
- Project
- Nucleus
- Commodity
- gold
- Region
- canada_yt
- Reported Region
- Yukon Territory
- Ticker
- TIG
Geometry
- Grade
- 0.381
- Grade Unit
- g/t
- Intercept
- 49.5 m
- From
- 157.5 m
- To
- 207 m
- Hole Depth
- 275.84 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- N17-13:157.5-207.0
- Mining Method
- open_pit
Location
- Easting
- 379255
- Northing
- 6913119
- CRS
- NAD83, Zone 8
- Azimuth
- 0 °
- Dip
- -50 °
- Loc. Confidence
- high
QA/QC
- Laboratory
- ALS Global
- QA/QC Disclosed
- Yes
- Lab Certified
- No
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- Yes
Compositing
- Cutoff Grade
- 0.3
- Cutoff Unit
- g/t AuEq
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2018-01-18T00:00:00.000Z
Reasoning: This step-out intercept shows a significant width with a gold grade below the project average, confirming potential for resource expansion, though true width is not known.
Positive factors
- Intercept length (49.5 m) is continuous, indicating good continuity.
- This is a step-out intercept, indicating potential for resource expansion.
Negative factors
- Gold grade (0.381 g/t) is below the project average (0.502 g/t Au).
- True width not determined.
Evidence · table
“0.381”
Context: 49.50
N17-13Nucleus · silverGrade: 0.8Grade Unit: g/tIntercept: 49.5 mView all detailsHide details
Identity
- Hole ID
- N17-13
- Project
- Nucleus
- Commodity
- silver
- Region
- canada_yt
- Reported Region
- Yukon Territory
- Ticker
- TIG
Geometry
- Grade
- 0.8
- Grade Unit
- g/t
- Intercept
- 49.5 m
- From
- 157.5 m
- To
- 207 m
- Hole Depth
- 275.84 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- N17-13:157.5-207.0
- Mining Method
- open_pit
Location
- Easting
- 379255
- Northing
- 6913119
- CRS
- NAD83, Zone 8
- Azimuth
- 0 °
- Dip
- -50 °
- Loc. Confidence
- high
QA/QC
- Laboratory
- ALS Global
- QA/QC Disclosed
- Yes
- Lab Certified
- No
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- Yes
Compositing
- Cutoff Grade
- 0.3
- Cutoff Unit
- g/t AuEq
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2018-01-18T00:00:00.000Z
Reasoning: This step-out intercept shows a low silver grade, though true width is not known.
Negative factors
- Silver grade is low.
- True width not determined.
Evidence · table
“0.8”
Context: 49.50
N17-13Nucleus · copperGrade: 0.048Grade Unit: %Intercept: 49.5 mView all detailsHide details
Identity
- Hole ID
- N17-13
- Project
- Nucleus
- Commodity
- copper
- Region
- canada_yt
- Reported Region
- Yukon Territory
- Ticker
- TIG
Geometry
- Grade
- 0.048
- Grade Unit
- %
- Intercept
- 49.5 m
- From
- 157.5 m
- To
- 207 m
- Hole Depth
- 275.84 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- N17-13:157.5-207.0
- Mining Method
- open_pit
Location
- Easting
- 379255
- Northing
- 6913119
- CRS
- NAD83, Zone 8
- Azimuth
- 0 °
- Dip
- -50 °
- Loc. Confidence
- high
QA/QC
- Laboratory
- ALS Global
- QA/QC Disclosed
- Yes
- Lab Certified
- No
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- Yes
Compositing
- Cutoff Grade
- 0.3
- Cutoff Unit
- g/t AuEq
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2018-01-18T00:00:00.000Z
Reasoning: This step-out intercept shows a very low copper grade, well below the project average, though true width is not known.
Negative factors
- Copper grade (0.048%) is well below the project average (0.164% Cu).
- True width not determined.
Evidence · table
“0.048”
Context: 49.50
N17-10Nucleus · goldGrade: 0.567Grade Unit: g/tIntercept: 21.53 mView all detailsHide details
Identity
- Hole ID
- N17-10
- Project
- Nucleus
- Commodity
- gold
- Region
- canada_yt
- Reported Region
- Yukon Territory
- Ticker
- TIG
Geometry
- Grade
- 0.567
- Grade Unit
- g/t
- Intercept
- 21.53 m
- From
- 453 m
- To
- 474.53 m
- Hole Depth
- 474.53 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- N17-10:453.0-474.53
- Mining Method
- open_pit
Location
- Easting
- 379181
- Northing
- 6914374
- CRS
- NAD83, Zone 8
- Azimuth
- 0 °
- Dip
- -60 °
- Loc. Confidence
- high
QA/QC
- Laboratory
- ALS Global
- QA/QC Disclosed
- Yes
- Lab Certified
- No
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- Yes
Compositing
- Cutoff Grade
- 0.3
- Cutoff Unit
- g/t AuEq
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2018-01-18T00:00:00.000Z
Reasoning: This reconnaissance intercept shows a gold grade above the project average over a moderate width, indicating new discovery potential, though true width is not known.
Positive factors
- Gold grade (0.567 g/t) is above the project average (0.502 g/t Au).
- Intercept length (21.53 m) is moderate.
- This is a reconnaissance exploration target, indicating new discovery potential.
Negative factors
- True width not determined.
Evidence · table
“0.567”
Context: 21.53
N17-10Nucleus · silverGrade: 0.5Grade Unit: g/tIntercept: 21.53 mView all detailsHide details
Identity
- Hole ID
- N17-10
- Project
- Nucleus
- Commodity
- silver
- Region
- canada_yt
- Reported Region
- Yukon Territory
- Ticker
- TIG
Geometry
- Grade
- 0.5
- Grade Unit
- g/t
- Intercept
- 21.53 m
- From
- 453 m
- To
- 474.53 m
- Hole Depth
- 474.53 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- N17-10:453.0-474.53
- Mining Method
- open_pit
Location
- Easting
- 379181
- Northing
- 6914374
- CRS
- NAD83, Zone 8
- Azimuth
- 0 °
- Dip
- -60 °
- Loc. Confidence
- high
QA/QC
- Laboratory
- ALS Global
- QA/QC Disclosed
- Yes
- Lab Certified
- No
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- Yes
Compositing
- Cutoff Grade
- 0.3
- Cutoff Unit
- g/t AuEq
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2018-01-18T00:00:00.000Z
Reasoning: This reconnaissance intercept shows a low silver grade, though true width is not known.
Negative factors
- Silver grade is low.
- True width not determined.
Evidence · table
“0.5”
Context: 21.53
N17-10Nucleus · copperGrade: 0.022Grade Unit: %Intercept: 21.53 mView all detailsHide details
Identity
- Hole ID
- N17-10
- Project
- Nucleus
- Commodity
- copper
- Region
- canada_yt
- Reported Region
- Yukon Territory
- Ticker
- TIG
Geometry
- Grade
- 0.022
- Grade Unit
- %
- Intercept
- 21.53 m
- From
- 453 m
- To
- 474.53 m
- Hole Depth
- 474.53 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- N17-10:453.0-474.53
- Mining Method
- open_pit
Location
- Easting
- 379181
- Northing
- 6914374
- CRS
- NAD83, Zone 8
- Azimuth
- 0 °
- Dip
- -60 °
- Loc. Confidence
- high
QA/QC
- Laboratory
- ALS Global
- QA/QC Disclosed
- Yes
- Lab Certified
- No
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- Yes
Compositing
- Cutoff Grade
- 0.3
- Cutoff Unit
- g/t AuEq
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2018-01-18T00:00:00.000Z
Reasoning: This reconnaissance intercept shows a very low copper grade, well below the project average, though true width is not known.
Negative factors
- Copper grade (0.022%) is well below the project average (0.164% Cu).
- True width not determined.
Evidence · table
“0.022”
Context: 21.53
N17-10Nucleus · goldGrade: 1.089Grade Unit: g/tIntercept: 9.53 mView all detailsHide details
Identity
- Hole ID
- N17-10
- Project
- Nucleus
- Commodity
- gold
- Region
- canada_yt
- Reported Region
- Yukon Territory
- Ticker
- TIG
Geometry
- Grade
- 1.089
- Grade Unit
- g/t
- Intercept
- 9.53 m
- From
- 465 m
- To
- 474.53 m
- Hole Depth
- 474.53 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- N17-10:465.0-474.53
- Mining Method
- open_pit
Location
- Easting
- 379181
- Northing
- 6914374
- CRS
- NAD83, Zone 8
- Azimuth
- 0 °
- Dip
- -60 °
- Loc. Confidence
- high
QA/QC
- Laboratory
- ALS Global
- QA/QC Disclosed
- Yes
- Lab Certified
- No
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- Yes
Compositing
- Cutoff Grade
- 0.3
- Cutoff Unit
- g/t AuEq
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2018-01-18T00:00:00.000Z
Reasoning: This reconnaissance intercept shows a strong gold grade over a moderate width, well above the project average, indicating new discovery potential.
Positive factors
- Gold grade (1.089 g/t) is significantly above the project average (0.502 g/t Au).
- This is a reconnaissance exploration target, indicating new discovery potential.
- This is a high-grade sub-interval within a broader mineralized zone.
Negative factors
- True width not determined.
Evidence · table
“1.089”
Context: 9.53
N17-10Nucleus · silverGrade: 0.4Grade Unit: g/tIntercept: 9.53 mView all detailsHide details
Identity
- Hole ID
- N17-10
- Project
- Nucleus
- Commodity
- silver
- Region
- canada_yt
- Reported Region
- Yukon Territory
- Ticker
- TIG
Geometry
- Grade
- 0.4
- Grade Unit
- g/t
- Intercept
- 9.53 m
- From
- 465 m
- To
- 474.53 m
- Hole Depth
- 474.53 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- N17-10:465.0-474.53
- Mining Method
- open_pit
Location
- Easting
- 379181
- Northing
- 6914374
- CRS
- NAD83, Zone 8
- Azimuth
- 0 °
- Dip
- -60 °
- Loc. Confidence
- high
QA/QC
- Laboratory
- ALS Global
- QA/QC Disclosed
- Yes
- Lab Certified
- No
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- Yes
Compositing
- Cutoff Grade
- 0.3
- Cutoff Unit
- g/t AuEq
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2018-01-18T00:00:00.000Z
Reasoning: This reconnaissance intercept shows a low silver grade, though true width is not known.
Negative factors
- Silver grade is low.
- True width not determined.
Evidence · table
“0.4”
Context: 9.53
N17-10Nucleus · copperGrade: 0.017Grade Unit: %Intercept: 9.53 mView all detailsHide details
Identity
- Hole ID
- N17-10
- Project
- Nucleus
- Commodity
- copper
- Region
- canada_yt
- Reported Region
- Yukon Territory
- Ticker
- TIG
Geometry
- Grade
- 0.017
- Grade Unit
- %
- Intercept
- 9.53 m
- From
- 465 m
- To
- 474.53 m
- Hole Depth
- 474.53 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- N17-10:465.0-474.53
- Mining Method
- open_pit
Location
- Easting
- 379181
- Northing
- 6914374
- CRS
- NAD83, Zone 8
- Azimuth
- 0 °
- Dip
- -60 °
- Loc. Confidence
- high
QA/QC
- Laboratory
- ALS Global
- QA/QC Disclosed
- Yes
- Lab Certified
- No
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- Yes
Compositing
- Cutoff Grade
- 0.3
- Cutoff Unit
- g/t AuEq
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2018-01-18T00:00:00.000Z
Reasoning: This reconnaissance intercept shows a very low copper grade, well below the project average, though true width is not known.
Negative factors
- Copper grade (0.017%) is well below the project average (0.164% Cu).
- True width not determined.
Evidence · table
“0.017”
Context: 9.53
IncludingNucleus · goldGrade: 18.5Grade Unit: g/tIntercept: 1.5 mView all detailsHide details
Identity
- Hole ID
- Including
- Project
- Nucleus
- Commodity
- gold
- Region
- canada_yt
- Reported Region
- Yukon Territory
- Ticker
- TIG
Geometry
- Grade
- 18.5
- Grade Unit
- g/t
- Intercept
- 1.5 m
- From
- 174.5 m
- To
- 176 m
Classification
- Sample Type
- drill
- Group ID
- Including:174.5-176
- Mining Method
- open_pit
Location
- CRS
- NAD83, Zone 8
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2018-01-18T00:00:00.000Z
Reasoning: Expanded from assay table. 18.5 g/t gold is exceptional against the open_pit mining band [5, 2, 1, 0.3] g/t. Grade×width 27.8 g/t·m is weak (grade alone is exceptional; the better of the two is used).
Positive factors
- 18.5 g/t gold is exceptional on the open_pit mining band.
Negative factors
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“18.500”
Context: Including
IncludingNucleus · silverGrade: 1.3Grade Unit: g/tIntercept: 1.5 mView all detailsHide details
Identity
- Hole ID
- Including
- Project
- Nucleus
- Commodity
- silver
- Region
- canada_yt
- Reported Region
- Yukon Territory
- Ticker
- TIG
Geometry
- Grade
- 1.3
- Grade Unit
- g/t
- Intercept
- 1.5 m
- From
- 174.5 m
- To
- 176 m
Classification
- Sample Type
- drill
- Group ID
- Including:174.5-176
- Mining Method
- open_pit
Location
- CRS
- NAD83, Zone 8
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2018-01-18T00:00:00.000Z
Reasoning: Expanded from assay table. 1.3 g/t silver is below against the default band [500, 200, 100, 30] g/t. Grade×width 2.0 g/t·m is below.
Negative factors
- 1.3 g/t silver is below the weak threshold (30 g/t) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“1.3”
Context: Including
IncludingNucleus · copperGrade: 0.164Grade Unit: %Intercept: 1.5 mView all detailsHide details
Identity
- Hole ID
- Including
- Project
- Nucleus
- Commodity
- copper
- Region
- canada_yt
- Reported Region
- Yukon Territory
- Ticker
- TIG
Geometry
- Grade
- 0.164
- Grade Unit
- %
- Intercept
- 1.5 m
- From
- 174.5 m
- To
- 176 m
Classification
- Sample Type
- drill
- Group ID
- Including:174.5-176
- Mining Method
- open_pit
Location
- CRS
- NAD83, Zone 8
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2018-01-18T00:00:00.000Z
Reasoning: Expanded from assay table. 0.164 % copper is below against the default band [2.5, 1, 0.5, 0.25] %. Grade×width 0.2 %·m is below.
Negative factors
- 0.164 % copper is below the weak threshold (0.25 %) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.164”
Context: Including
IncludingNucleus · goldGrade: 11.35Grade Unit: g/tIntercept: 1.44 mView all detailsHide details
Identity
- Hole ID
- Including
- Project
- Nucleus
- Commodity
- gold
- Region
- canada_yt
- Reported Region
- Yukon Territory
- Ticker
- TIG
Geometry
- Grade
- 11.35
- Grade Unit
- g/t
- Intercept
- 1.44 m
- From
- 132.46 m
- To
- 133.9 m
Classification
- Sample Type
- drill
- Group ID
- Including:132.46-133.9
- Mining Method
- open_pit
Location
- CRS
- NAD83, Zone 8
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2018-01-18T00:00:00.000Z
Reasoning: Expanded from assay table. 11.35 g/t gold is exceptional against the open_pit mining band [5, 2, 1, 0.3] g/t. Grade×width 16.3 g/t·m is weak (grade alone is exceptional; the better of the two is used).
Positive factors
- 11.35 g/t gold is exceptional on the open_pit mining band.
Negative factors
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“11.350”
Context: Including
IncludingNucleus · silverGrade: 7.3Grade Unit: g/tIntercept: 1.44 mView all detailsHide details
Identity
- Hole ID
- Including
- Project
- Nucleus
- Commodity
- silver
- Region
- canada_yt
- Reported Region
- Yukon Territory
- Ticker
- TIG
Geometry
- Grade
- 7.3
- Grade Unit
- g/t
- Intercept
- 1.44 m
- From
- 132.46 m
- To
- 133.9 m
Classification
- Sample Type
- drill
- Group ID
- Including:132.46-133.9
- Mining Method
- open_pit
Location
- CRS
- NAD83, Zone 8
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2018-01-18T00:00:00.000Z
Reasoning: Expanded from assay table. 7.3 g/t silver is below against the default band [500, 200, 100, 30] g/t. Grade×width 10.5 g/t·m is below.
Negative factors
- 7.3 g/t silver is below the weak threshold (30 g/t) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“7.3”
Context: Including
IncludingNucleus · copperGrade: 0.2Grade Unit: %Intercept: 1.44 mView all detailsHide details
Identity
- Hole ID
- Including
- Project
- Nucleus
- Commodity
- copper
- Region
- canada_yt
- Reported Region
- Yukon Territory
- Ticker
- TIG
Geometry
- Grade
- 0.2
- Grade Unit
- %
- Intercept
- 1.44 m
- From
- 132.46 m
- To
- 133.9 m
Classification
- Sample Type
- drill
- Group ID
- Including:132.46-133.9
- Mining Method
- open_pit
Location
- CRS
- NAD83, Zone 8
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2018-01-18T00:00:00.000Z
Reasoning: Expanded from assay table. 0.2 % copper is below against the default band [2.5, 1, 0.5, 0.25] %. Grade×width 0.3 %·m is below.
Negative factors
- 0.2 % copper is below the weak threshold (0.25 %) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.200”
Context: Including
IncludingNucleus · goldGrade: 10.2Grade Unit: g/tIntercept: 1.1 mView all detailsHide details
Identity
- Hole ID
- Including
- Project
- Nucleus
- Commodity
- gold
- Region
- canada_yt
- Reported Region
- Yukon Territory
- Ticker
- TIG
Geometry
- Grade
- 10.2
- Grade Unit
- g/t
- Intercept
- 1.1 m
- From
- 111 m
- To
- 112.1 m
Classification
- Sample Type
- drill
- Group ID
- Including:111-112.1
- Mining Method
- open_pit
Location
- CRS
- NAD83, Zone 8
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2018-01-18T00:00:00.000Z
Reasoning: Expanded from assay table. 10.2 g/t gold is exceptional against the open_pit mining band [5, 2, 1, 0.3] g/t. Grade×width 11.2 g/t·m is weak (grade alone is exceptional; the better of the two is used).
Positive factors
- 10.2 g/t gold is exceptional on the open_pit mining band.
Negative factors
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“10.200”
Context: Including
IncludingNucleus · silverGrade: 0.7Grade Unit: g/tIntercept: 1.1 mView all detailsHide details
Identity
- Hole ID
- Including
- Project
- Nucleus
- Commodity
- silver
- Region
- canada_yt
- Reported Region
- Yukon Territory
- Ticker
- TIG
Geometry
- Grade
- 0.7
- Grade Unit
- g/t
- Intercept
- 1.1 m
- From
- 111 m
- To
- 112.1 m
Classification
- Sample Type
- drill
- Group ID
- Including:111-112.1
- Mining Method
- open_pit
Location
- CRS
- NAD83, Zone 8
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2018-01-18T00:00:00.000Z
Reasoning: Expanded from assay table. 0.7 g/t silver is below against the default band [500, 200, 100, 30] g/t. Grade×width 0.8 g/t·m is below.
Negative factors
- 0.7 g/t silver is below the weak threshold (30 g/t) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.7”
Context: Including
IncludingNucleus · copperGrade: 0.03Grade Unit: %Intercept: 1.1 mView all detailsHide details
Identity
- Hole ID
- Including
- Project
- Nucleus
- Commodity
- copper
- Region
- canada_yt
- Reported Region
- Yukon Territory
- Ticker
- TIG
Geometry
- Grade
- 0.03
- Grade Unit
- %
- Intercept
- 1.1 m
- From
- 111 m
- To
- 112.1 m
Classification
- Sample Type
- drill
- Group ID
- Including:111-112.1
- Mining Method
- open_pit
Location
- CRS
- NAD83, Zone 8
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2018-01-18T00:00:00.000Z
Reasoning: Expanded from assay table. 0.03 % copper is below against the default band [2.5, 1, 0.5, 0.25] %. Grade×width 0.0 %·m is below.
Negative factors
- 0.03 % copper is below the weak threshold (0.25 %) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.030”
Context: Including
IncludingNucleus · goldGrade: 1.089Grade Unit: g/tIntercept: 9.53 mView all detailsHide details
Identity
- Hole ID
- Including
- Project
- Nucleus
- Commodity
- gold
- Region
- canada_yt
- Reported Region
- Yukon Territory
- Ticker
- TIG
Geometry
- Grade
- 1.089
- Grade Unit
- g/t
- Intercept
- 9.53 m
- From
- 465 m
- To
- 474.53 m
Classification
- Sample Type
- drill
- Group ID
- Including:465-474.53
- Mining Method
- open_pit
Location
- CRS
- NAD83, Zone 8
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2018-01-18T00:00:00.000Z
Reasoning: Expanded from assay table. 1.089 g/t gold is moderate against the open_pit mining band [5, 2, 1, 0.3] g/t. Grade×width 10.4 g/t·m is weak (grade alone is moderate; the better of the two is used).
Negative factors
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“1.089”
Context: Including
IncludingNucleus · silverGrade: 0.4Grade Unit: g/tIntercept: 9.53 mView all detailsHide details
Identity
- Hole ID
- Including
- Project
- Nucleus
- Commodity
- silver
- Region
- canada_yt
- Reported Region
- Yukon Territory
- Ticker
- TIG
Geometry
- Grade
- 0.4
- Grade Unit
- g/t
- Intercept
- 9.53 m
- From
- 465 m
- To
- 474.53 m
Classification
- Sample Type
- drill
- Group ID
- Including:465-474.53
- Mining Method
- open_pit
Location
- CRS
- NAD83, Zone 8
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2018-01-18T00:00:00.000Z
Reasoning: Expanded from assay table. 0.4 g/t silver is below against the default band [500, 200, 100, 30] g/t. Grade×width 3.8 g/t·m is below.
Negative factors
- 0.4 g/t silver is below the weak threshold (30 g/t) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.4”
Context: Including
IncludingNucleus · copperGrade: 0.017Grade Unit: %Intercept: 9.53 mView all detailsHide details
Identity
- Hole ID
- Including
- Project
- Nucleus
- Commodity
- copper
- Region
- canada_yt
- Reported Region
- Yukon Territory
- Ticker
- TIG
Geometry
- Grade
- 0.017
- Grade Unit
- %
- Intercept
- 9.53 m
- From
- 465 m
- To
- 474.53 m
Classification
- Sample Type
- drill
- Group ID
- Including:465-474.53
- Mining Method
- open_pit
Location
- CRS
- NAD83, Zone 8
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2018-01-18T00:00:00.000Z
Reasoning: Expanded from assay table. 0.017 % copper is below against the default band [2.5, 1, 0.5, 0.25] %. Grade×width 0.2 %·m is below.
Negative factors
- 0.017 % copper is below the weak threshold (0.25 %) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.017”
Context: Including
How Atlas produces this analysis
Minestarters Atlas uses automated extraction to summarize mining announcements, identify reported measurements, and classify supporting evidence. Sentiment reflects the extracted narrative and classification rules; it is an interpretation, not a reported measurement. Evidence quotes and context are provided where available. Missing data, low-confidence results, and review flags indicate limitations. Check the original publisher announcement before relying on an interpretation.