TNC: High-Grade Results at Cloncurry with 11m at 4.23% CuEq

Original announcement by asx on

Company
True North Copper Limited
Ticker
TNC
Exchange
ASX
Region
Queensland
Primary commodity
Copper
Secondary commodities
Gold, Silver, Cobalt
Document categories
Drill results, Resource update
Extracted
2026-09-29 23:28:33 UTC

Analysis by Minestarters Atlas

Atlas analysis published:

Minestarters Atlas analysis

Summary

True North Copper Limited announced further high-grade copper-gold drill results from its Wallace North project in Northwest Queensland, including 11m at 4.23% CuEq. These new results build on previous drilling and a recent resource estimate, providing increased confidence in the existing resource and highlighting opportunities for further growth. The drilling will contribute to the Cloncurry Copper Project Pre-Feasibility Study (PFS) targeted for completion in late 2026, with follow-up drilling planned to extend mineralization.

Reasoning: The announcement reports high-grade copper-gold drill results from Wallace North, including bonanza CuEq intercepts, which are expected to contribute to resource growth and the ongoing PFS. The results are supported by JORC-compliant reporting, QP sign-off, and transparent QA/QC procedures, indicating strong potential for the project.

Positive factors

  • high_grade_intercepts
  • resource_extension_potential
  • contribution_to_pfs
  • jorc_compliant
  • qp_signed
  • qaqc_disclosed
  • compositing_transparent
  • metal_equivalent_assumptions_disclosed

Negative factors

  • apparent_width_only

Low confidence — this extraction should be reviewed alongside the original source.

Facts used in scoring: 204

Classification and evidence

Bonanza Interceptpositive

Exceptionally high-grade zone, well above the deposit-type norm.

Why it applies: The intercept of 11m @ 4.23% CuEq (WND26_001) and 3.97m @ 6.9% CuEq (WND26_007) are exceptionally high-grade for an IOCG deposit, well above the typical thresholds.

Evidence · text

“11m @ 2.18% Cu and 2.07g/t Au ( 4.23% CuEq ) from 161m^^^”

Apparent Width Onlynegative

Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.

Why it applies: The document explicitly states 'All widths are downhole intercepts' and 'Where there is limited control on the strike and dip of the structure controlling the mineralisation no ETW has been reported'.

Evidence · text

“All widths are downhole intercepts. * = 5.0% CuEq cutoff composite with up to 1m of internal waste, ^ = 0.1% CuEq cutoff composite with up to 5m of internal waste, ^^ = 0.5% CuEq cutoff composite with up to 2m of internal waste , ^^^ = 1.0% CuEq cutoff composite with up to 2m of internal waste, ** = geological composite”

QA/QC Disclosedpositive

Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).

Why it applies: The release includes a detailed JORC Table 1 with information on sampling techniques, assaying, laboratory procedures, and quality control measures including standards, blanks, and lab duplicates.

Evidence · text

“SECTION 1. SAMPLING TECHNIQUES AND DATA This JORC Table 1 refers to infill metallurgical diamond drilling from the 2026 program at the Wallace North Project, Mt Isa Region, Northwest Queensland.”

Compositing Transparentpositive

Cut-off grade and internal dilution rules are clearly stated for reported intervals.

Why it applies: The cut-off grades and internal dilution rules for the reported composite intervals are clearly stated in the footnotes.

Evidence · text

“^ = 0.1% CuEq cutoff composite with up to 5m of internal waste, ^^ = 0.5% CuEq cutoff composite with up to 2m of internal waste , ^^^ = 1.0% CuEq cutoff composite with up to 2m of internal waste, ** = geological composite”

Step-Out Extensionpositive

Mineralization extended beyond the previously known limit.

Why it applies: The drilling highlights 'opportunities for further resource growth' and 'Mineralisation remains open along strike and at depth', with 'Follow-up drilling late 2026 to target new high-grade parallel structures and Resource growth'.

Evidence · text

“Mineralisation remains open along strike and at depth”

Infill Drillingneutral

Confirmatory drilling to raise resource confidence, not new discovery.

Why it applies: The planned follow-up drilling for late 2026 and into 2027 aims 'to infill and extend high-grade Wallace North structures'.

Evidence · text

“Follow-up drilling planned for late 2026 and into 2027 to infill and extend high-grade Wallace North structures and test hanging wall and footwall lenses, with mineralisation remaining open to the north and along strike.”

QP/CP Signedpositive

Qualified Person (QP) or Competent Person (CP) named and signed off — a member of a recognized professional association (e.g., AusIMM, SME, AIG, P.Geo) with relevant experience.

Why it applies: Mr Matthew Porter, a Member of the Australian Institute of Geoscientists (MAIG), is named as the Competent Person responsible for the information in the announcement.

Evidence · text

“Mr Matthew Porter, who is a full-time employee True North Copper. Mr Porter is a Member of the Australian Institute of Geoscientists, (MAIG): #8372.”

JORC Compliantpositive

Resource estimate prepared in compliance with JORC Code (Australia) — high reporting standard.

Why it applies: The Competent Person's Statement confirms that the information is reported in accordance with the 2012 Edition of the Australasian Code for the Reporting of Exploration Results, Mineral Resources, and Ore Reserves (JORC Code).

Evidence · text

“Competent Person as defined in the 2012 Edition of the Australasian Code for the Reporting of Exploration Results, Mineral Resources, and Ore Reserves (JORC Code).”

Extracted facts

Stored fact records: 204. Some facts used in scoring do not have a stored record.

Drill Results (200)

WND26_007Cloncurry · copperIntercept: 3.97 mView all details
Link to this fact

Identity

Hole ID
WND26_007
Project
Cloncurry
Commodity
copper
Region
australia_qld
Reported Region
australia_qld
Ticker
TNC

Geometry

Intercept
3.97 m
From
88.03 m
To
92 m
Hole Depth
210 m
Intercept Depth
88.03 m

Classification

Deposit Type
iocg
Program
mixed
Sample Type
drill
Group ID
WND26_007:88.03-92
Mining Method
open_pit

Location

Location
Main Zone
Easting
474511
Northing
7696051
CRS
MGA94 Zone 54
Elevation
187 m
Azimuth
117 °
Dip
-65 °
Loc. Confidence
medium
Loc. Source
document

QA/QC

Laboratory
ALS Brisbane
QA/QC Disclosed
Yes
QP Signed
Yes
QA/QC Methods
standards, blanks, duplicates

Metal Equivalent

Metal Eq. Grade
6.9
Metal Eq. Unit
% CuEq
Assumptions Disclosed
Yes

Compositing

Cutoff Grade
0.1
Cutoff Unit
% CuEq
Dilution Disclosed
Yes
Max Dilution
5 m

Review

Needs Review
No
Interp. Status
scored
Historical
No

Dates

Event date
2026-09-29T00:00:00.000Z

Reasoning: Exceptional copper equivalent grade over a narrow but very high-grade downhole width.

Positive factors

  • bonanza_intercept
  • metal_equivalent_assumptions_disclosed
  • compositing_transparent

Negative factors

  • apparent_width_only
  • narrow_interval

Evidence · text

“3.97m @ 6.6% Cu and 0.29g/t Au ( 6.9% CuEq ) from 88.03m^”

Tags used in scoring

QA/QC Disclosedpositive

Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).

Why it applies: qaqc_disclosed is true

Compositing Transparentpositive

Cut-off grade and internal dilution rules are clearly stated for reported intervals.

Why it applies: cutoff_grade and internal dilution are both stated

Infill Drillingneutral

Confirmatory drilling to raise resource confidence, not new discovery.

Why it applies: drill_program_type is "mixed"

WND26_007Cloncurry · goldGrade: 0.29Grade Unit: g/tIntercept: 3.97 mView all details
Link to this fact

Identity

Hole ID
WND26_007
Project
Cloncurry
Commodity
gold
Region
australia_qld
Reported Region
australia_qld
Ticker
TNC

Geometry

Grade
0.29
Grade Unit
g/t
Intercept
3.97 m
From
88.03 m
To
92 m
Hole Depth
210 m
Intercept Depth
88.03 m

Classification

Deposit Type
iocg
Program
mixed
Sample Type
drill
Group ID
WND26_007:88.03-92
Mining Method
open_pit

Location

Location
Main Zone
Easting
474511
Northing
7696051
CRS
MGA94 Zone 54
Elevation
187 m
Azimuth
117 °
Dip
-65 °
Loc. Confidence
medium
Loc. Source
document

QA/QC

Laboratory
ALS Brisbane
QA/QC Disclosed
Yes
QP Signed
Yes
QA/QC Methods
standards, blanks, duplicates

Metal Equivalent

Assumptions Disclosed
Yes

Compositing

Cutoff Grade
0.1
Cutoff Unit
% CuEq
Dilution Disclosed
Yes
Max Dilution
5 m

Review

Needs Review
No
Interp. Status
scored
Historical
No

Dates

Event date
2026-09-29T00:00:00.000Z

Reasoning: Weak gold grade over a narrow downhole width, but part of a high-grade copper intercept.

Positive factors

  • compositing_transparent

Negative factors

  • apparent_width_only
  • narrow_interval
  • weak_grade

Evidence · text

“3.97m @ 6.6% Cu and 0.29g/t Au ( 6.9% CuEq ) from 88.03m^”

Tags used in scoring

QA/QC Disclosedpositive

Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).

Why it applies: qaqc_disclosed is true

Compositing Transparentpositive

Cut-off grade and internal dilution rules are clearly stated for reported intervals.

Why it applies: cutoff_grade and internal dilution are both stated

Infill Drillingneutral

Confirmatory drilling to raise resource confidence, not new discovery.

Why it applies: drill_program_type is "mixed"

WND26_001Cloncurry · copperGrade: 0.07Grade Unit: %Intercept: 0.8 mView all details
Link to this fact

Identity

Hole ID
WND26_001
Project
Cloncurry
Commodity
copper
Region
australia_qld
Reported Region
australia_qld
Ticker
TNC

Geometry

Grade
0.07
Grade Unit
%
Intercept
0.8 m
From
65.2 m
To
66 m
Intercept Depth
65.2 m

Classification

Deposit Type
iocg
Sample Type
drill
Group ID
WND26_001:65.2-66
Mining Method
open_pit

Location

Location
Main Zone
CRS
MGA94 Zone 54
Loc. Source
document

QA/QC

Laboratory
ALS Brisbane
QA/QC Disclosed
Yes
QP Signed
Yes
QA/QC Methods
standards, blanks, duplicates

Metal Equivalent

Metal Eq. Grade
0.09
Metal Eq. Unit
% Cu-Eq
Assumptions Disclosed
Yes

Compositing

Dilution Disclosed
Yes

Review

Needs Review
No
Interp. Status
scored
Historical
No

Dates

Event date
2026-09-29T00:00:00.000Z

Reasoning: Expanded from assay table. 0.07 % copper is below against the iocg deposit band [0.9, 0.5, 0.3, 0.2] %. Grade×width 0.1 %·m is below.

Negative factors

  • 0.07 % copper is below the weak threshold (0.2 %) on the iocg deposit band.
  • Scored from rubric bands during table expansion, not from document context.

Evidence · table

“0.07”

Context: WND26_001

Tags used in scoring

QA/QC Disclosedpositive

Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).

Why it applies: qaqc_disclosed is true

Cut-off Undisclosednegative

High-grade interval reported without stating the cut-off grade used for compositing.

Why it applies: no cutoff_grade was stated

WND26_001Cloncurry · goldGrade: 0.02Grade Unit: g/tIntercept: 0.8 mView all details
Link to this fact

Identity

Hole ID
WND26_001
Project
Cloncurry
Commodity
gold
Region
australia_qld
Reported Region
australia_qld
Ticker
TNC

Geometry

Grade
0.02
Grade Unit
g/t
Intercept
0.8 m
From
65.2 m
To
66 m
Intercept Depth
65.2 m

Classification

Deposit Type
iocg
Sample Type
drill
Group ID
WND26_001:65.2-66
Mining Method
open_pit

Location

Location
Main Zone
CRS
MGA94 Zone 54
Loc. Source
document

QA/QC

Laboratory
ALS Brisbane
QA/QC Disclosed
Yes
QP Signed
Yes
QA/QC Methods
standards, blanks, duplicates

Metal Equivalent

Metal Eq. Grade
0.09
Metal Eq. Unit
% Cu-Eq
Assumptions Disclosed
Yes

Compositing

Dilution Disclosed
Yes

Review

Needs Review
No
Interp. Status
scored
Historical
No

Dates

Event date
2026-09-29T00:00:00.000Z

Reasoning: Expanded from assay table. 0.02 g/t gold is below against the open_pit mining band [5, 2, 1, 0.3] g/t. Grade×width 0.0 g/t·m is below.

Negative factors

  • 0.02 g/t gold is below the weak threshold (0.3 g/t) on the open_pit mining band.
  • Scored from rubric bands during table expansion, not from document context.

Evidence · table

“0.02”

Context: WND26_001

Tags used in scoring

QA/QC Disclosedpositive

Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).

Why it applies: qaqc_disclosed is true

Cut-off Undisclosednegative

High-grade interval reported without stating the cut-off grade used for compositing.

Why it applies: no cutoff_grade was stated

WND26_001Cloncurry · copperGrade: 0.02Grade Unit: %Intercept: 1 mView all details
Link to this fact

Identity

Hole ID
WND26_001
Project
Cloncurry
Commodity
copper
Region
australia_qld
Reported Region
australia_qld
Ticker
TNC

Geometry

Grade
0.02
Grade Unit
%
Intercept
1 m
From
66 m
To
67 m
Intercept Depth
66 m

Classification

Deposit Type
iocg
Sample Type
drill
Group ID
WND26_001:66-67
Mining Method
open_pit

Location

Location
Main Zone
CRS
MGA94 Zone 54
Loc. Source
document

QA/QC

Laboratory
ALS Brisbane
QA/QC Disclosed
Yes
QP Signed
Yes
QA/QC Methods
standards, blanks, duplicates

Metal Equivalent

Metal Eq. Grade
0.03
Metal Eq. Unit
% Cu-Eq
Assumptions Disclosed
Yes

Compositing

Dilution Disclosed
Yes

Review

Needs Review
No
Interp. Status
scored
Historical
No

Dates

Event date
2026-09-29T00:00:00.000Z

Reasoning: Expanded from assay table. 0.02 % copper is below against the iocg deposit band [0.9, 0.5, 0.3, 0.2] %. Grade×width 0.0 %·m is below.

Negative factors

  • 0.02 % copper is below the weak threshold (0.2 %) on the iocg deposit band.
  • Scored from rubric bands during table expansion, not from document context.

Evidence · table

“0.02”

Context: WND26_001

Tags used in scoring

QA/QC Disclosedpositive

Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).

Why it applies: qaqc_disclosed is true

Cut-off Undisclosednegative

High-grade interval reported without stating the cut-off grade used for compositing.

Why it applies: no cutoff_grade was stated

WND26_001Cloncurry · goldGrade: 0.01Grade Unit: g/tIntercept: 1 mView all details
Link to this fact

Identity

Hole ID
WND26_001
Project
Cloncurry
Commodity
gold
Region
australia_qld
Reported Region
australia_qld
Ticker
TNC

Geometry

Grade
0.01
Grade Unit
g/t
Intercept
1 m
From
66 m
To
67 m
Intercept Depth
66 m

Classification

Deposit Type
iocg
Sample Type
drill
Group ID
WND26_001:66-67
Mining Method
open_pit

Location

Location
Main Zone
CRS
MGA94 Zone 54
Loc. Source
document

QA/QC

Laboratory
ALS Brisbane
QA/QC Disclosed
Yes
QP Signed
Yes
QA/QC Methods
standards, blanks, duplicates

Metal Equivalent

Metal Eq. Grade
0.03
Metal Eq. Unit
% Cu-Eq
Assumptions Disclosed
Yes

Compositing

Dilution Disclosed
Yes

Review

Needs Review
No
Interp. Status
scored
Historical
No

Dates

Event date
2026-09-29T00:00:00.000Z

Reasoning: Expanded from assay table. 0.01 g/t gold is below against the open_pit mining band [5, 2, 1, 0.3] g/t. Grade×width 0.0 g/t·m is below.

Negative factors

  • 0.01 g/t gold is below the weak threshold (0.3 g/t) on the open_pit mining band.
  • Scored from rubric bands during table expansion, not from document context.

Evidence · table

“0.01”

Context: WND26_001

Tags used in scoring

QA/QC Disclosedpositive

Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).

Why it applies: qaqc_disclosed is true

Cut-off Undisclosednegative

High-grade interval reported without stating the cut-off grade used for compositing.

Why it applies: no cutoff_grade was stated

WND26_001Cloncurry · copperGrade: 0.01Grade Unit: %Intercept: 1 mView all details
Link to this fact

Identity

Hole ID
WND26_001
Project
Cloncurry
Commodity
copper
Region
australia_qld
Reported Region
australia_qld
Ticker
TNC

Geometry

Grade
0.01
Grade Unit
%
Intercept
1 m
From
67 m
To
68 m
Intercept Depth
67 m

Classification

Deposit Type
iocg
Sample Type
drill
Group ID
WND26_001:67-68
Mining Method
open_pit

Location

Location
Main Zone
CRS
MGA94 Zone 54
Loc. Source
document

QA/QC

Laboratory
ALS Brisbane
QA/QC Disclosed
Yes
QP Signed
Yes
QA/QC Methods
standards, blanks, duplicates

Metal Equivalent

Metal Eq. Grade
0.03
Metal Eq. Unit
% Cu-Eq
Assumptions Disclosed
Yes

Compositing

Dilution Disclosed
Yes

Review

Needs Review
No
Interp. Status
scored
Historical
No

Dates

Event date
2026-09-29T00:00:00.000Z

Reasoning: Expanded from assay table. 0.01 % copper is below against the iocg deposit band [0.9, 0.5, 0.3, 0.2] %. Grade×width 0.0 %·m is below.

Negative factors

  • 0.01 % copper is below the weak threshold (0.2 %) on the iocg deposit band.
  • Scored from rubric bands during table expansion, not from document context.

Evidence · table

“0.01”

Context: WND26_001

Tags used in scoring

QA/QC Disclosedpositive

Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).

Why it applies: qaqc_disclosed is true

Cut-off Undisclosednegative

High-grade interval reported without stating the cut-off grade used for compositing.

Why it applies: no cutoff_grade was stated

WND26_001Cloncurry · goldGrade: 0.02Grade Unit: g/tIntercept: 1 mView all details
Link to this fact

Identity

Hole ID
WND26_001
Project
Cloncurry
Commodity
gold
Region
australia_qld
Reported Region
australia_qld
Ticker
TNC

Geometry

Grade
0.02
Grade Unit
g/t
Intercept
1 m
From
67 m
To
68 m
Intercept Depth
67 m

Classification

Deposit Type
iocg
Sample Type
drill
Group ID
WND26_001:67-68
Mining Method
open_pit

Location

Location
Main Zone
CRS
MGA94 Zone 54
Loc. Source
document

QA/QC

Laboratory
ALS Brisbane
QA/QC Disclosed
Yes
QP Signed
Yes
QA/QC Methods
standards, blanks, duplicates

Metal Equivalent

Metal Eq. Grade
0.03
Metal Eq. Unit
% Cu-Eq
Assumptions Disclosed
Yes

Compositing

Dilution Disclosed
Yes

Review

Needs Review
No
Interp. Status
scored
Historical
No

Dates

Event date
2026-09-29T00:00:00.000Z

Reasoning: Expanded from assay table. 0.02 g/t gold is below against the open_pit mining band [5, 2, 1, 0.3] g/t. Grade×width 0.0 g/t·m is below.

Negative factors

  • 0.02 g/t gold is below the weak threshold (0.3 g/t) on the open_pit mining band.
  • Scored from rubric bands during table expansion, not from document context.

Evidence · table

“0.02”

Context: WND26_001

Tags used in scoring

QA/QC Disclosedpositive

Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).

Why it applies: qaqc_disclosed is true

Cut-off Undisclosednegative

High-grade interval reported without stating the cut-off grade used for compositing.

Why it applies: no cutoff_grade was stated

WND26_001Cloncurry · copperGrade: 0.01Grade Unit: %Intercept: 0.8 mView all details
Link to this fact

Identity

Hole ID
WND26_001
Project
Cloncurry
Commodity
copper
Region
australia_qld
Reported Region
australia_qld
Ticker
TNC

Geometry

Grade
0.01
Grade Unit
%
Intercept
0.8 m
From
68 m
To
68.8 m
Intercept Depth
68 m

Classification

Deposit Type
iocg
Sample Type
drill
Group ID
WND26_001:68-68.8
Mining Method
open_pit

Location

Location
Main Zone
CRS
MGA94 Zone 54
Loc. Source
document

QA/QC

Laboratory
ALS Brisbane
QA/QC Disclosed
Yes
QP Signed
Yes
QA/QC Methods
standards, blanks, duplicates

Metal Equivalent

Metal Eq. Grade
0.02
Metal Eq. Unit
% Cu-Eq
Assumptions Disclosed
Yes

Compositing

Dilution Disclosed
Yes

Review

Needs Review
No
Interp. Status
scored
Historical
No

Dates

Event date
2026-09-29T00:00:00.000Z

Reasoning: Expanded from assay table. 0.01 % copper is below against the iocg deposit band [0.9, 0.5, 0.3, 0.2] %. Grade×width 0.0 %·m is below.

Negative factors

  • 0.01 % copper is below the weak threshold (0.2 %) on the iocg deposit band.
  • Scored from rubric bands during table expansion, not from document context.

Evidence · table

“0.01”

Context: WND26_001

Tags used in scoring

QA/QC Disclosedpositive

Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).

Why it applies: qaqc_disclosed is true

Cut-off Undisclosednegative

High-grade interval reported without stating the cut-off grade used for compositing.

Why it applies: no cutoff_grade was stated

WND26_001Cloncurry · goldGrade: 0.01Grade Unit: g/tIntercept: 0.8 mView all details
Link to this fact

Identity

Hole ID
WND26_001
Project
Cloncurry
Commodity
gold
Region
australia_qld
Reported Region
australia_qld
Ticker
TNC

Geometry

Grade
0.01
Grade Unit
g/t
Intercept
0.8 m
From
68 m
To
68.8 m
Intercept Depth
68 m

Classification

Deposit Type
iocg
Sample Type
drill
Group ID
WND26_001:68-68.8
Mining Method
open_pit

Location

Location
Main Zone
CRS
MGA94 Zone 54
Loc. Source
document

QA/QC

Laboratory
ALS Brisbane
QA/QC Disclosed
Yes
QP Signed
Yes
QA/QC Methods
standards, blanks, duplicates

Metal Equivalent

Metal Eq. Grade
0.02
Metal Eq. Unit
% Cu-Eq
Assumptions Disclosed
Yes

Compositing

Dilution Disclosed
Yes

Review

Needs Review
No
Interp. Status
scored
Historical
No

Dates

Event date
2026-09-29T00:00:00.000Z

Reasoning: Expanded from assay table. 0.01 g/t gold is below against the open_pit mining band [5, 2, 1, 0.3] g/t. Grade×width 0.0 g/t·m is below.

Negative factors

  • 0.01 g/t gold is below the weak threshold (0.3 g/t) on the open_pit mining band.
  • Scored from rubric bands during table expansion, not from document context.

Evidence · table

“0.01”

Context: WND26_001

Tags used in scoring

QA/QC Disclosedpositive

Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).

Why it applies: qaqc_disclosed is true

Cut-off Undisclosednegative

High-grade interval reported without stating the cut-off grade used for compositing.

Why it applies: no cutoff_grade was stated

WND26_001Cloncurry · copperGrade: 0.01Grade Unit: %Intercept: 1.2 mView all details
Link to this fact

Identity

Hole ID
WND26_001
Project
Cloncurry
Commodity
copper
Region
australia_qld
Reported Region
australia_qld
Ticker
TNC

Geometry

Grade
0.01
Grade Unit
%
Intercept
1.2 m
From
68.8 m
To
70 m
Intercept Depth
68.8 m

Classification

Deposit Type
iocg
Sample Type
drill
Group ID
WND26_001:68.8-70
Mining Method
open_pit

Location

Location
Main Zone
CRS
MGA94 Zone 54
Loc. Source
document

QA/QC

Laboratory
ALS Brisbane
QA/QC Disclosed
Yes
QP Signed
Yes
QA/QC Methods
standards, blanks, duplicates

Metal Equivalent

Metal Eq. Grade
0.02
Metal Eq. Unit
% Cu-Eq
Assumptions Disclosed
Yes

Compositing

Dilution Disclosed
Yes

Review

Needs Review
No
Interp. Status
scored
Historical
No

Dates

Event date
2026-09-29T00:00:00.000Z

Reasoning: Expanded from assay table. 0.01 % copper is below against the iocg deposit band [0.9, 0.5, 0.3, 0.2] %. Grade×width 0.0 %·m is below.

Negative factors

  • 0.01 % copper is below the weak threshold (0.2 %) on the iocg deposit band.
  • Scored from rubric bands during table expansion, not from document context.

Evidence · table

“0.01”

Context: WND26_001

Tags used in scoring

QA/QC Disclosedpositive

Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).

Why it applies: qaqc_disclosed is true

Cut-off Undisclosednegative

High-grade interval reported without stating the cut-off grade used for compositing.

Why it applies: no cutoff_grade was stated

WND26_001Cloncurry · goldGrade: 0.01Grade Unit: g/tIntercept: 1.2 mView all details
Link to this fact

Identity

Hole ID
WND26_001
Project
Cloncurry
Commodity
gold
Region
australia_qld
Reported Region
australia_qld
Ticker
TNC

Geometry

Grade
0.01
Grade Unit
g/t
Intercept
1.2 m
From
68.8 m
To
70 m
Intercept Depth
68.8 m

Classification

Deposit Type
iocg
Sample Type
drill
Group ID
WND26_001:68.8-70
Mining Method
open_pit

Location

Location
Main Zone
CRS
MGA94 Zone 54
Loc. Source
document

QA/QC

Laboratory
ALS Brisbane
QA/QC Disclosed
Yes
QP Signed
Yes
QA/QC Methods
standards, blanks, duplicates

Metal Equivalent

Metal Eq. Grade
0.02
Metal Eq. Unit
% Cu-Eq
Assumptions Disclosed
Yes

Compositing

Dilution Disclosed
Yes

Review

Needs Review
No
Interp. Status
scored
Historical
No

Dates

Event date
2026-09-29T00:00:00.000Z

Reasoning: Expanded from assay table. 0.01 g/t gold is below against the open_pit mining band [5, 2, 1, 0.3] g/t. Grade×width 0.0 g/t·m is below.

Negative factors

  • 0.01 g/t gold is below the weak threshold (0.3 g/t) on the open_pit mining band.
  • Scored from rubric bands during table expansion, not from document context.

Evidence · table

“0.01”

Context: WND26_001

Tags used in scoring

QA/QC Disclosedpositive

Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).

Why it applies: qaqc_disclosed is true

Cut-off Undisclosednegative

High-grade interval reported without stating the cut-off grade used for compositing.

Why it applies: no cutoff_grade was stated

WND26_001Cloncurry · copperGrade: 0.01Grade Unit: %Intercept: 1 mView all details
Link to this fact

Identity

Hole ID
WND26_001
Project
Cloncurry
Commodity
copper
Region
australia_qld
Reported Region
australia_qld
Ticker
TNC

Geometry

Grade
0.01
Grade Unit
%
Intercept
1 m
From
70 m
To
71 m
Intercept Depth
70 m

Classification

Deposit Type
iocg
Sample Type
drill
Group ID
WND26_001:70-71
Mining Method
open_pit

Location

Location
Main Zone
CRS
MGA94 Zone 54
Loc. Source
document

QA/QC

Laboratory
ALS Brisbane
QA/QC Disclosed
Yes
QP Signed
Yes
QA/QC Methods
standards, blanks, duplicates

Metal Equivalent

Metal Eq. Grade
0.02
Metal Eq. Unit
% Cu-Eq
Assumptions Disclosed
Yes

Compositing

Dilution Disclosed
Yes

Review

Needs Review
No
Interp. Status
scored
Historical
No

Dates

Event date
2026-09-29T00:00:00.000Z

Reasoning: Expanded from assay table. 0.01 % copper is below against the iocg deposit band [0.9, 0.5, 0.3, 0.2] %. Grade×width 0.0 %·m is below.

Negative factors

  • 0.01 % copper is below the weak threshold (0.2 %) on the iocg deposit band.
  • Scored from rubric bands during table expansion, not from document context.

Evidence · table

“0.01”

Context: WND26_001

Tags used in scoring

QA/QC Disclosedpositive

Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).

Why it applies: qaqc_disclosed is true

Cut-off Undisclosednegative

High-grade interval reported without stating the cut-off grade used for compositing.

Why it applies: no cutoff_grade was stated

WND26_001Cloncurry · goldGrade: 0.01Grade Unit: g/tIntercept: 1 mView all details
Link to this fact

Identity

Hole ID
WND26_001
Project
Cloncurry
Commodity
gold
Region
australia_qld
Reported Region
australia_qld
Ticker
TNC

Geometry

Grade
0.01
Grade Unit
g/t
Intercept
1 m
From
70 m
To
71 m
Intercept Depth
70 m

Classification

Deposit Type
iocg
Sample Type
drill
Group ID
WND26_001:70-71
Mining Method
open_pit

Location

Location
Main Zone
CRS
MGA94 Zone 54
Loc. Source
document

QA/QC

Laboratory
ALS Brisbane
QA/QC Disclosed
Yes
QP Signed
Yes
QA/QC Methods
standards, blanks, duplicates

Metal Equivalent

Metal Eq. Grade
0.02
Metal Eq. Unit
% Cu-Eq
Assumptions Disclosed
Yes

Compositing

Dilution Disclosed
Yes

Review

Needs Review
No
Interp. Status
scored
Historical
No

Dates

Event date
2026-09-29T00:00:00.000Z

Reasoning: Expanded from assay table. 0.01 g/t gold is below against the open_pit mining band [5, 2, 1, 0.3] g/t. Grade×width 0.0 g/t·m is below.

Negative factors

  • 0.01 g/t gold is below the weak threshold (0.3 g/t) on the open_pit mining band.
  • Scored from rubric bands during table expansion, not from document context.

Evidence · table

“0.01”

Context: WND26_001

Tags used in scoring

QA/QC Disclosedpositive

Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).

Why it applies: qaqc_disclosed is true

Cut-off Undisclosednegative

High-grade interval reported without stating the cut-off grade used for compositing.

Why it applies: no cutoff_grade was stated

WND26_001Cloncurry · copperGrade: 0.01Grade Unit: %Intercept: 1 mView all details
Link to this fact

Identity

Hole ID
WND26_001
Project
Cloncurry
Commodity
copper
Region
australia_qld
Reported Region
australia_qld
Ticker
TNC

Geometry

Grade
0.01
Grade Unit
%
Intercept
1 m
From
71 m
To
72 m
Intercept Depth
71 m

Classification

Deposit Type
iocg
Sample Type
drill
Group ID
WND26_001:71-72
Mining Method
open_pit

Location

Location
Main Zone
CRS
MGA94 Zone 54
Loc. Source
document

QA/QC

Laboratory
ALS Brisbane
QA/QC Disclosed
Yes
QP Signed
Yes
QA/QC Methods
standards, blanks, duplicates

Metal Equivalent

Metal Eq. Grade
0.02
Metal Eq. Unit
% Cu-Eq
Assumptions Disclosed
Yes

Compositing

Dilution Disclosed
Yes

Review

Needs Review
No
Interp. Status
scored
Historical
No

Dates

Event date
2026-09-29T00:00:00.000Z

Reasoning: Expanded from assay table. 0.01 % copper is below against the iocg deposit band [0.9, 0.5, 0.3, 0.2] %. Grade×width 0.0 %·m is below.

Negative factors

  • 0.01 % copper is below the weak threshold (0.2 %) on the iocg deposit band.
  • Scored from rubric bands during table expansion, not from document context.

Evidence · table

“0.01”

Context: WND26_001

Tags used in scoring

QA/QC Disclosedpositive

Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).

Why it applies: qaqc_disclosed is true

Cut-off Undisclosednegative

High-grade interval reported without stating the cut-off grade used for compositing.

Why it applies: no cutoff_grade was stated

WND26_001Cloncurry · goldGrade: 0.01Grade Unit: g/tIntercept: 1 mView all details
Link to this fact

Identity

Hole ID
WND26_001
Project
Cloncurry
Commodity
gold
Region
australia_qld
Reported Region
australia_qld
Ticker
TNC

Geometry

Grade
0.01
Grade Unit
g/t
Intercept
1 m
From
71 m
To
72 m
Intercept Depth
71 m

Classification

Deposit Type
iocg
Sample Type
drill
Group ID
WND26_001:71-72
Mining Method
open_pit

Location

Location
Main Zone
CRS
MGA94 Zone 54
Loc. Source
document

QA/QC

Laboratory
ALS Brisbane
QA/QC Disclosed
Yes
QP Signed
Yes
QA/QC Methods
standards, blanks, duplicates

Metal Equivalent

Metal Eq. Grade
0.02
Metal Eq. Unit
% Cu-Eq
Assumptions Disclosed
Yes

Compositing

Dilution Disclosed
Yes

Review

Needs Review
No
Interp. Status
scored
Historical
No

Dates

Event date
2026-09-29T00:00:00.000Z

Reasoning: Expanded from assay table. 0.01 g/t gold is below against the open_pit mining band [5, 2, 1, 0.3] g/t. Grade×width 0.0 g/t·m is below.

Negative factors

  • 0.01 g/t gold is below the weak threshold (0.3 g/t) on the open_pit mining band.
  • Scored from rubric bands during table expansion, not from document context.

Evidence · table

“0.01”

Context: WND26_001

Tags used in scoring

QA/QC Disclosedpositive

Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).

Why it applies: qaqc_disclosed is true

Cut-off Undisclosednegative

High-grade interval reported without stating the cut-off grade used for compositing.

Why it applies: no cutoff_grade was stated

WND26_001Cloncurry · copperGrade: 0.01Grade Unit: %Intercept: 1 mView all details
Link to this fact

Identity

Hole ID
WND26_001
Project
Cloncurry
Commodity
copper
Region
australia_qld
Reported Region
australia_qld
Ticker
TNC

Geometry

Grade
0.01
Grade Unit
%
Intercept
1 m
From
72 m
To
73 m
Intercept Depth
72 m

Classification

Deposit Type
iocg
Sample Type
drill
Group ID
WND26_001:72-73
Mining Method
open_pit

Location

Location
Main Zone
CRS
MGA94 Zone 54
Loc. Source
document

QA/QC

Laboratory
ALS Brisbane
QA/QC Disclosed
Yes
QP Signed
Yes
QA/QC Methods
standards, blanks, duplicates

Metal Equivalent

Metal Eq. Grade
0.02
Metal Eq. Unit
% Cu-Eq
Assumptions Disclosed
Yes

Compositing

Dilution Disclosed
Yes

Review

Needs Review
No
Interp. Status
scored
Historical
No

Dates

Event date
2026-09-29T00:00:00.000Z

Reasoning: Expanded from assay table. 0.01 % copper is below against the iocg deposit band [0.9, 0.5, 0.3, 0.2] %. Grade×width 0.0 %·m is below.

Negative factors

  • 0.01 % copper is below the weak threshold (0.2 %) on the iocg deposit band.
  • Scored from rubric bands during table expansion, not from document context.

Evidence · table

“0.01”

Context: WND26_001

Tags used in scoring

QA/QC Disclosedpositive

Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).

Why it applies: qaqc_disclosed is true

Cut-off Undisclosednegative

High-grade interval reported without stating the cut-off grade used for compositing.

Why it applies: no cutoff_grade was stated

WND26_001Cloncurry · goldGrade: 0.01Grade Unit: g/tIntercept: 1 mView all details
Link to this fact

Identity

Hole ID
WND26_001
Project
Cloncurry
Commodity
gold
Region
australia_qld
Reported Region
australia_qld
Ticker
TNC

Geometry

Grade
0.01
Grade Unit
g/t
Intercept
1 m
From
72 m
To
73 m
Intercept Depth
72 m

Classification

Deposit Type
iocg
Sample Type
drill
Group ID
WND26_001:72-73
Mining Method
open_pit

Location

Location
Main Zone
CRS
MGA94 Zone 54
Loc. Source
document

QA/QC

Laboratory
ALS Brisbane
QA/QC Disclosed
Yes
QP Signed
Yes
QA/QC Methods
standards, blanks, duplicates

Metal Equivalent

Metal Eq. Grade
0.02
Metal Eq. Unit
% Cu-Eq
Assumptions Disclosed
Yes

Compositing

Dilution Disclosed
Yes

Review

Needs Review
No
Interp. Status
scored
Historical
No

Dates

Event date
2026-09-29T00:00:00.000Z

Reasoning: Expanded from assay table. 0.01 g/t gold is below against the open_pit mining band [5, 2, 1, 0.3] g/t. Grade×width 0.0 g/t·m is below.

Negative factors

  • 0.01 g/t gold is below the weak threshold (0.3 g/t) on the open_pit mining band.
  • Scored from rubric bands during table expansion, not from document context.

Evidence · table

“0.01”

Context: WND26_001

Tags used in scoring

QA/QC Disclosedpositive

Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).

Why it applies: qaqc_disclosed is true

Cut-off Undisclosednegative

High-grade interval reported without stating the cut-off grade used for compositing.

Why it applies: no cutoff_grade was stated

WND26_001Cloncurry · copperGrade: 0Grade Unit: %Intercept: 1 mView all details
Link to this fact

Identity

Hole ID
WND26_001
Project
Cloncurry
Commodity
copper
Region
australia_qld
Reported Region
australia_qld
Ticker
TNC

Geometry

Grade
0
Grade Unit
%
Intercept
1 m
From
73 m
To
74 m
Intercept Depth
73 m

Classification

Deposit Type
iocg
Sample Type
drill
Group ID
WND26_001:73-74
Mining Method
open_pit

Location

Location
Main Zone
CRS
MGA94 Zone 54
Loc. Source
document

QA/QC

Laboratory
ALS Brisbane
QA/QC Disclosed
Yes
QP Signed
Yes
QA/QC Methods
standards, blanks, duplicates

Metal Equivalent

Metal Eq. Grade
0.01
Metal Eq. Unit
% Cu-Eq
Assumptions Disclosed
Yes

Compositing

Dilution Disclosed
Yes

Review

Needs Review
No
Interp. Status
scored
Historical
No

Dates

Event date
2026-09-29T00:00:00.000Z

Reasoning: Expanded from assay table. 0 % copper is below against the iocg deposit band [0.9, 0.5, 0.3, 0.2] %. Grade×width 0.0 %·m is below.

Negative factors

  • 0 % copper is below the weak threshold (0.2 %) on the iocg deposit band.
  • Scored from rubric bands during table expansion, not from document context.

Evidence · table

“0.00”

Context: WND26_001

Tags used in scoring

QA/QC Disclosedpositive

Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).

Why it applies: qaqc_disclosed is true

Cut-off Undisclosednegative

High-grade interval reported without stating the cut-off grade used for compositing.

Why it applies: no cutoff_grade was stated

WND26_001Cloncurry · goldGrade: 0.01Grade Unit: g/tIntercept: 1 mView all details
Link to this fact

Identity

Hole ID
WND26_001
Project
Cloncurry
Commodity
gold
Region
australia_qld
Reported Region
australia_qld
Ticker
TNC

Geometry

Grade
0.01
Grade Unit
g/t
Intercept
1 m
From
73 m
To
74 m
Intercept Depth
73 m

Classification

Deposit Type
iocg
Sample Type
drill
Group ID
WND26_001:73-74
Mining Method
open_pit

Location

Location
Main Zone
CRS
MGA94 Zone 54
Loc. Source
document

QA/QC

Laboratory
ALS Brisbane
QA/QC Disclosed
Yes
QP Signed
Yes
QA/QC Methods
standards, blanks, duplicates

Metal Equivalent

Metal Eq. Grade
0.01
Metal Eq. Unit
% Cu-Eq
Assumptions Disclosed
Yes

Compositing

Dilution Disclosed
Yes

Review

Needs Review
No
Interp. Status
scored
Historical
No

Dates

Event date
2026-09-29T00:00:00.000Z

Reasoning: Expanded from assay table. 0.01 g/t gold is below against the open_pit mining band [5, 2, 1, 0.3] g/t. Grade×width 0.0 g/t·m is below.

Negative factors

  • 0.01 g/t gold is below the weak threshold (0.3 g/t) on the open_pit mining band.
  • Scored from rubric bands during table expansion, not from document context.

Evidence · table

“0.01”

Context: WND26_001

Tags used in scoring

QA/QC Disclosedpositive

Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).

Why it applies: qaqc_disclosed is true

Cut-off Undisclosednegative

High-grade interval reported without stating the cut-off grade used for compositing.

Why it applies: no cutoff_grade was stated

WND26_001Cloncurry · copperGrade: 0Grade Unit: %Intercept: 1 mView all details
Link to this fact

Identity

Hole ID
WND26_001
Project
Cloncurry
Commodity
copper
Region
australia_qld
Reported Region
australia_qld
Ticker
TNC

Geometry

Grade
0
Grade Unit
%
Intercept
1 m
From
74 m
To
75 m
Intercept Depth
74 m

Classification

Deposit Type
iocg
Sample Type
drill
Group ID
WND26_001:74-75
Mining Method
open_pit

Location

Location
Main Zone
CRS
MGA94 Zone 54
Loc. Source
document

QA/QC

Laboratory
ALS Brisbane
QA/QC Disclosed
Yes
QP Signed
Yes
QA/QC Methods
standards, blanks, duplicates

Metal Equivalent

Metal Eq. Grade
0.01
Metal Eq. Unit
% Cu-Eq
Assumptions Disclosed
Yes

Compositing

Dilution Disclosed
Yes

Review

Needs Review
No
Interp. Status
scored
Historical
No

Dates

Event date
2026-09-29T00:00:00.000Z

Reasoning: Expanded from assay table. 0 % copper is below against the iocg deposit band [0.9, 0.5, 0.3, 0.2] %. Grade×width 0.0 %·m is below.

Negative factors

  • 0 % copper is below the weak threshold (0.2 %) on the iocg deposit band.
  • Scored from rubric bands during table expansion, not from document context.

Evidence · table

“0.00”

Context: WND26_001

Tags used in scoring

QA/QC Disclosedpositive

Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).

Why it applies: qaqc_disclosed is true

Cut-off Undisclosednegative

High-grade interval reported without stating the cut-off grade used for compositing.

Why it applies: no cutoff_grade was stated

WND26_001Cloncurry · goldGrade: 0.01Grade Unit: g/tIntercept: 1 mView all details
Link to this fact

Identity

Hole ID
WND26_001
Project
Cloncurry
Commodity
gold
Region
australia_qld
Reported Region
australia_qld
Ticker
TNC

Geometry

Grade
0.01
Grade Unit
g/t
Intercept
1 m
From
74 m
To
75 m
Intercept Depth
74 m

Classification

Deposit Type
iocg
Sample Type
drill
Group ID
WND26_001:74-75
Mining Method
open_pit

Location

Location
Main Zone
CRS
MGA94 Zone 54
Loc. Source
document

QA/QC

Laboratory
ALS Brisbane
QA/QC Disclosed
Yes
QP Signed
Yes
QA/QC Methods
standards, blanks, duplicates

Metal Equivalent

Metal Eq. Grade
0.01
Metal Eq. Unit
% Cu-Eq
Assumptions Disclosed
Yes

Compositing

Dilution Disclosed
Yes

Review

Needs Review
No
Interp. Status
scored
Historical
No

Dates

Event date
2026-09-29T00:00:00.000Z

Reasoning: Expanded from assay table. 0.01 g/t gold is below against the open_pit mining band [5, 2, 1, 0.3] g/t. Grade×width 0.0 g/t·m is below.

Negative factors

  • 0.01 g/t gold is below the weak threshold (0.3 g/t) on the open_pit mining band.
  • Scored from rubric bands during table expansion, not from document context.

Evidence · table

“0.01”

Context: WND26_001

Tags used in scoring

QA/QC Disclosedpositive

Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).

Why it applies: qaqc_disclosed is true

Cut-off Undisclosednegative

High-grade interval reported without stating the cut-off grade used for compositing.

Why it applies: no cutoff_grade was stated

WND26_001Cloncurry · copperGrade: 0.02Grade Unit: %Intercept: 1 mView all details
Link to this fact

Identity

Hole ID
WND26_001
Project
Cloncurry
Commodity
copper
Region
australia_qld
Reported Region
australia_qld
Ticker
TNC

Geometry

Grade
0.02
Grade Unit
%
Intercept
1 m
From
75 m
To
76 m
Intercept Depth
75 m

Classification

Deposit Type
iocg
Sample Type
drill
Group ID
WND26_001:75-76
Mining Method
open_pit

Location

Location
Main Zone
CRS
MGA94 Zone 54
Loc. Source
document

QA/QC

Laboratory
ALS Brisbane
QA/QC Disclosed
Yes
QP Signed
Yes
QA/QC Methods
standards, blanks, duplicates

Metal Equivalent

Metal Eq. Grade
0.03
Metal Eq. Unit
% Cu-Eq
Assumptions Disclosed
Yes

Compositing

Dilution Disclosed
Yes

Review

Needs Review
No
Interp. Status
scored
Historical
No

Dates

Event date
2026-09-29T00:00:00.000Z

Reasoning: Expanded from assay table. 0.02 % copper is below against the iocg deposit band [0.9, 0.5, 0.3, 0.2] %. Grade×width 0.0 %·m is below.

Negative factors

  • 0.02 % copper is below the weak threshold (0.2 %) on the iocg deposit band.
  • Scored from rubric bands during table expansion, not from document context.

Evidence · table

“0.02”

Context: WND26_001

Tags used in scoring

QA/QC Disclosedpositive

Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).

Why it applies: qaqc_disclosed is true

Cut-off Undisclosednegative

High-grade interval reported without stating the cut-off grade used for compositing.

Why it applies: no cutoff_grade was stated

WND26_001Cloncurry · goldGrade: 0.01Grade Unit: g/tIntercept: 1 mView all details
Link to this fact

Identity

Hole ID
WND26_001
Project
Cloncurry
Commodity
gold
Region
australia_qld
Reported Region
australia_qld
Ticker
TNC

Geometry

Grade
0.01
Grade Unit
g/t
Intercept
1 m
From
75 m
To
76 m
Intercept Depth
75 m

Classification

Deposit Type
iocg
Sample Type
drill
Group ID
WND26_001:75-76
Mining Method
open_pit

Location

Location
Main Zone
CRS
MGA94 Zone 54
Loc. Source
document

QA/QC

Laboratory
ALS Brisbane
QA/QC Disclosed
Yes
QP Signed
Yes
QA/QC Methods
standards, blanks, duplicates

Metal Equivalent

Metal Eq. Grade
0.03
Metal Eq. Unit
% Cu-Eq
Assumptions Disclosed
Yes

Compositing

Dilution Disclosed
Yes

Review

Needs Review
No
Interp. Status
scored
Historical
No

Dates

Event date
2026-09-29T00:00:00.000Z

Reasoning: Expanded from assay table. 0.01 g/t gold is below against the open_pit mining band [5, 2, 1, 0.3] g/t. Grade×width 0.0 g/t·m is below.

Negative factors

  • 0.01 g/t gold is below the weak threshold (0.3 g/t) on the open_pit mining band.
  • Scored from rubric bands during table expansion, not from document context.

Evidence · table

“0.01”

Context: WND26_001

Tags used in scoring

QA/QC Disclosedpositive

Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).

Why it applies: qaqc_disclosed is true

Cut-off Undisclosednegative

High-grade interval reported without stating the cut-off grade used for compositing.

Why it applies: no cutoff_grade was stated

WND26_001Cloncurry · copperGrade: 0.01Grade Unit: %Intercept: 1 mView all details
Link to this fact

Identity

Hole ID
WND26_001
Project
Cloncurry
Commodity
copper
Region
australia_qld
Reported Region
australia_qld
Ticker
TNC

Geometry

Grade
0.01
Grade Unit
%
Intercept
1 m
From
76 m
To
77 m
Intercept Depth
76 m

Classification

Deposit Type
iocg
Sample Type
drill
Group ID
WND26_001:76-77
Mining Method
open_pit

Location

Location
Main Zone
CRS
MGA94 Zone 54
Loc. Source
document

QA/QC

Laboratory
ALS Brisbane
QA/QC Disclosed
Yes
QP Signed
Yes
QA/QC Methods
standards, blanks, duplicates

Metal Equivalent

Metal Eq. Grade
0.02
Metal Eq. Unit
% Cu-Eq
Assumptions Disclosed
Yes

Compositing

Dilution Disclosed
Yes

Review

Needs Review
No
Interp. Status
scored
Historical
No

Dates

Event date
2026-09-29T00:00:00.000Z

Reasoning: Expanded from assay table. 0.01 % copper is below against the iocg deposit band [0.9, 0.5, 0.3, 0.2] %. Grade×width 0.0 %·m is below.

Negative factors

  • 0.01 % copper is below the weak threshold (0.2 %) on the iocg deposit band.
  • Scored from rubric bands during table expansion, not from document context.

Evidence · table

“0.01”

Context: WND26_001

Tags used in scoring

QA/QC Disclosedpositive

Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).

Why it applies: qaqc_disclosed is true

Cut-off Undisclosednegative

High-grade interval reported without stating the cut-off grade used for compositing.

Why it applies: no cutoff_grade was stated

WND26_001Cloncurry · goldGrade: 0.01Grade Unit: g/tIntercept: 1 mView all details
Link to this fact

Identity

Hole ID
WND26_001
Project
Cloncurry
Commodity
gold
Region
australia_qld
Reported Region
australia_qld
Ticker
TNC

Geometry

Grade
0.01
Grade Unit
g/t
Intercept
1 m
From
76 m
To
77 m
Intercept Depth
76 m

Classification

Deposit Type
iocg
Sample Type
drill
Group ID
WND26_001:76-77
Mining Method
open_pit

Location

Location
Main Zone
CRS
MGA94 Zone 54
Loc. Source
document

QA/QC

Laboratory
ALS Brisbane
QA/QC Disclosed
Yes
QP Signed
Yes
QA/QC Methods
standards, blanks, duplicates

Metal Equivalent

Metal Eq. Grade
0.02
Metal Eq. Unit
% Cu-Eq
Assumptions Disclosed
Yes

Compositing

Dilution Disclosed
Yes

Review

Needs Review
No
Interp. Status
scored
Historical
No

Dates

Event date
2026-09-29T00:00:00.000Z

Reasoning: Expanded from assay table. 0.01 g/t gold is below against the open_pit mining band [5, 2, 1, 0.3] g/t. Grade×width 0.0 g/t·m is below.

Negative factors

  • 0.01 g/t gold is below the weak threshold (0.3 g/t) on the open_pit mining band.
  • Scored from rubric bands during table expansion, not from document context.

Evidence · table

“0.01”

Context: WND26_001

Tags used in scoring

QA/QC Disclosedpositive

Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).

Why it applies: qaqc_disclosed is true

Cut-off Undisclosednegative

High-grade interval reported without stating the cut-off grade used for compositing.

Why it applies: no cutoff_grade was stated

WND26_001Cloncurry · copperGrade: 0Grade Unit: %Intercept: 1 mView all details
Link to this fact

Identity

Hole ID
WND26_001
Project
Cloncurry
Commodity
copper
Region
australia_qld
Reported Region
australia_qld
Ticker
TNC

Geometry

Grade
0
Grade Unit
%
Intercept
1 m
From
77 m
To
78 m
Intercept Depth
77 m

Classification

Deposit Type
iocg
Sample Type
drill
Group ID
WND26_001:77-78
Mining Method
open_pit

Location

Location
Main Zone
CRS
MGA94 Zone 54
Loc. Source
document

QA/QC

Laboratory
ALS Brisbane
QA/QC Disclosed
Yes
QP Signed
Yes
QA/QC Methods
standards, blanks, duplicates

Metal Equivalent

Metal Eq. Grade
0.01
Metal Eq. Unit
% Cu-Eq
Assumptions Disclosed
Yes

Compositing

Dilution Disclosed
Yes

Review

Needs Review
No
Interp. Status
scored
Historical
No

Dates

Event date
2026-09-29T00:00:00.000Z

Reasoning: Expanded from assay table. 0 % copper is below against the iocg deposit band [0.9, 0.5, 0.3, 0.2] %. Grade×width 0.0 %·m is below.

Negative factors

  • 0 % copper is below the weak threshold (0.2 %) on the iocg deposit band.
  • Scored from rubric bands during table expansion, not from document context.

Evidence · table

“0.00”

Context: WND26_001

Tags used in scoring

QA/QC Disclosedpositive

Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).

Why it applies: qaqc_disclosed is true

Cut-off Undisclosednegative

High-grade interval reported without stating the cut-off grade used for compositing.

Why it applies: no cutoff_grade was stated

WND26_001Cloncurry · goldGrade: 0.01Grade Unit: g/tIntercept: 1 mView all details
Link to this fact

Identity

Hole ID
WND26_001
Project
Cloncurry
Commodity
gold
Region
australia_qld
Reported Region
australia_qld
Ticker
TNC

Geometry

Grade
0.01
Grade Unit
g/t
Intercept
1 m
From
77 m
To
78 m
Intercept Depth
77 m

Classification

Deposit Type
iocg
Sample Type
drill
Group ID
WND26_001:77-78
Mining Method
open_pit

Location

Location
Main Zone
CRS
MGA94 Zone 54
Loc. Source
document

QA/QC

Laboratory
ALS Brisbane
QA/QC Disclosed
Yes
QP Signed
Yes
QA/QC Methods
standards, blanks, duplicates

Metal Equivalent

Metal Eq. Grade
0.01
Metal Eq. Unit
% Cu-Eq
Assumptions Disclosed
Yes

Compositing

Dilution Disclosed
Yes

Review

Needs Review
No
Interp. Status
scored
Historical
No

Dates

Event date
2026-09-29T00:00:00.000Z

Reasoning: Expanded from assay table. 0.01 g/t gold is below against the open_pit mining band [5, 2, 1, 0.3] g/t. Grade×width 0.0 g/t·m is below.

Negative factors

  • 0.01 g/t gold is below the weak threshold (0.3 g/t) on the open_pit mining band.
  • Scored from rubric bands during table expansion, not from document context.

Evidence · table

“0.01”

Context: WND26_001

Tags used in scoring

QA/QC Disclosedpositive

Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).

Why it applies: qaqc_disclosed is true

Cut-off Undisclosednegative

High-grade interval reported without stating the cut-off grade used for compositing.

Why it applies: no cutoff_grade was stated

WND26_001Cloncurry · copperGrade: 0.02Grade Unit: %Intercept: 1 mView all details
Link to this fact

Identity

Hole ID
WND26_001
Project
Cloncurry
Commodity
copper
Region
australia_qld
Reported Region
australia_qld
Ticker
TNC

Geometry

Grade
0.02
Grade Unit
%
Intercept
1 m
From
78 m
To
79 m
Intercept Depth
78 m

Classification

Deposit Type
iocg
Sample Type
drill
Group ID
WND26_001:78-79
Mining Method
open_pit

Location

Location
Main Zone
CRS
MGA94 Zone 54
Loc. Source
document

QA/QC

Laboratory
ALS Brisbane
QA/QC Disclosed
Yes
QP Signed
Yes
QA/QC Methods
standards, blanks, duplicates

Metal Equivalent

Metal Eq. Grade
0.03
Metal Eq. Unit
% Cu-Eq
Assumptions Disclosed
Yes

Compositing

Dilution Disclosed
Yes

Review

Needs Review
No
Interp. Status
scored
Historical
No

Dates

Event date
2026-09-29T00:00:00.000Z

Reasoning: Expanded from assay table. 0.02 % copper is below against the iocg deposit band [0.9, 0.5, 0.3, 0.2] %. Grade×width 0.0 %·m is below.

Negative factors

  • 0.02 % copper is below the weak threshold (0.2 %) on the iocg deposit band.
  • Scored from rubric bands during table expansion, not from document context.

Evidence · table

“0.02”

Context: WND26_001

Tags used in scoring

QA/QC Disclosedpositive

Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).

Why it applies: qaqc_disclosed is true

Cut-off Undisclosednegative

High-grade interval reported without stating the cut-off grade used for compositing.

Why it applies: no cutoff_grade was stated

WND26_001Cloncurry · goldGrade: 0.01Grade Unit: g/tIntercept: 1 mView all details
Link to this fact

Identity

Hole ID
WND26_001
Project
Cloncurry
Commodity
gold
Region
australia_qld
Reported Region
australia_qld
Ticker
TNC

Geometry

Grade
0.01
Grade Unit
g/t
Intercept
1 m
From
78 m
To
79 m
Intercept Depth
78 m

Classification

Deposit Type
iocg
Sample Type
drill
Group ID
WND26_001:78-79
Mining Method
open_pit

Location

Location
Main Zone
CRS
MGA94 Zone 54
Loc. Source
document

QA/QC

Laboratory
ALS Brisbane
QA/QC Disclosed
Yes
QP Signed
Yes
QA/QC Methods
standards, blanks, duplicates

Metal Equivalent

Metal Eq. Grade
0.03
Metal Eq. Unit
% Cu-Eq
Assumptions Disclosed
Yes

Compositing

Dilution Disclosed
Yes

Review

Needs Review
No
Interp. Status
scored
Historical
No

Dates

Event date
2026-09-29T00:00:00.000Z

Reasoning: Expanded from assay table. 0.01 g/t gold is below against the open_pit mining band [5, 2, 1, 0.3] g/t. Grade×width 0.0 g/t·m is below.

Negative factors

  • 0.01 g/t gold is below the weak threshold (0.3 g/t) on the open_pit mining band.
  • Scored from rubric bands during table expansion, not from document context.

Evidence · table

“0.01”

Context: WND26_001

Tags used in scoring

QA/QC Disclosedpositive

Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).

Why it applies: qaqc_disclosed is true

Cut-off Undisclosednegative

High-grade interval reported without stating the cut-off grade used for compositing.

Why it applies: no cutoff_grade was stated

WND26_001Cloncurry · copperGrade: 0.01Grade Unit: %Intercept: 1 mView all details
Link to this fact

Identity

Hole ID
WND26_001
Project
Cloncurry
Commodity
copper
Region
australia_qld
Reported Region
australia_qld
Ticker
TNC

Geometry

Grade
0.01
Grade Unit
%
Intercept
1 m
From
79 m
To
80 m
Intercept Depth
79 m

Classification

Deposit Type
iocg
Sample Type
drill
Group ID
WND26_001:79-80
Mining Method
open_pit

Location

Location
Main Zone
CRS
MGA94 Zone 54
Loc. Source
document

QA/QC

Laboratory
ALS Brisbane
QA/QC Disclosed
Yes
QP Signed
Yes
QA/QC Methods
standards, blanks, duplicates

Metal Equivalent

Metal Eq. Grade
0.07
Metal Eq. Unit
% Cu-Eq
Assumptions Disclosed
Yes

Compositing

Dilution Disclosed
Yes

Review

Needs Review
No
Interp. Status
scored
Historical
No

Dates

Event date
2026-09-29T00:00:00.000Z

Reasoning: Expanded from assay table. 0.01 % copper is below against the iocg deposit band [0.9, 0.5, 0.3, 0.2] %. Grade×width 0.0 %·m is below.

Negative factors

  • 0.01 % copper is below the weak threshold (0.2 %) on the iocg deposit band.
  • Scored from rubric bands during table expansion, not from document context.

Evidence · table

“0.01”

Context: WND26_001

Tags used in scoring

QA/QC Disclosedpositive

Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).

Why it applies: qaqc_disclosed is true

Cut-off Undisclosednegative

High-grade interval reported without stating the cut-off grade used for compositing.

Why it applies: no cutoff_grade was stated

WND26_001Cloncurry · goldGrade: 0.06Grade Unit: g/tIntercept: 1 mView all details
Link to this fact

Identity

Hole ID
WND26_001
Project
Cloncurry
Commodity
gold
Region
australia_qld
Reported Region
australia_qld
Ticker
TNC

Geometry

Grade
0.06
Grade Unit
g/t
Intercept
1 m
From
79 m
To
80 m
Intercept Depth
79 m

Classification

Deposit Type
iocg
Sample Type
drill
Group ID
WND26_001:79-80
Mining Method
open_pit

Location

Location
Main Zone
CRS
MGA94 Zone 54
Loc. Source
document

QA/QC

Laboratory
ALS Brisbane
QA/QC Disclosed
Yes
QP Signed
Yes
QA/QC Methods
standards, blanks, duplicates

Metal Equivalent

Metal Eq. Grade
0.07
Metal Eq. Unit
% Cu-Eq
Assumptions Disclosed
Yes

Compositing

Dilution Disclosed
Yes

Review

Needs Review
No
Interp. Status
scored
Historical
No

Dates

Event date
2026-09-29T00:00:00.000Z

Reasoning: Expanded from assay table. 0.06 g/t gold is below against the open_pit mining band [5, 2, 1, 0.3] g/t. Grade×width 0.1 g/t·m is below.

Negative factors

  • 0.06 g/t gold is below the weak threshold (0.3 g/t) on the open_pit mining band.
  • Scored from rubric bands during table expansion, not from document context.

Evidence · table

“0.06”

Context: WND26_001

Tags used in scoring

QA/QC Disclosedpositive

Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).

Why it applies: qaqc_disclosed is true

Cut-off Undisclosednegative

High-grade interval reported without stating the cut-off grade used for compositing.

Why it applies: no cutoff_grade was stated

WND26_001Cloncurry · copperGrade: 0.01Grade Unit: %Intercept: 1 mView all details
Link to this fact

Identity

Hole ID
WND26_001
Project
Cloncurry
Commodity
copper
Region
australia_qld
Reported Region
australia_qld
Ticker
TNC

Geometry

Grade
0.01
Grade Unit
%
Intercept
1 m
From
80 m
To
81 m
Intercept Depth
80 m

Classification

Deposit Type
iocg
Sample Type
drill
Group ID
WND26_001:80-81
Mining Method
open_pit

Location

Location
Main Zone
CRS
MGA94 Zone 54
Loc. Source
document

QA/QC

Laboratory
ALS Brisbane
QA/QC Disclosed
Yes
QP Signed
Yes
QA/QC Methods
standards, blanks, duplicates

Metal Equivalent

Metal Eq. Grade
0.02
Metal Eq. Unit
% Cu-Eq
Assumptions Disclosed
Yes

Compositing

Dilution Disclosed
Yes

Review

Needs Review
No
Interp. Status
scored
Historical
No

Dates

Event date
2026-09-29T00:00:00.000Z

Reasoning: Expanded from assay table. 0.01 % copper is below against the iocg deposit band [0.9, 0.5, 0.3, 0.2] %. Grade×width 0.0 %·m is below.

Negative factors

  • 0.01 % copper is below the weak threshold (0.2 %) on the iocg deposit band.
  • Scored from rubric bands during table expansion, not from document context.

Evidence · table

“0.01”

Context: WND26_001

Tags used in scoring

QA/QC Disclosedpositive

Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).

Why it applies: qaqc_disclosed is true

Cut-off Undisclosednegative

High-grade interval reported without stating the cut-off grade used for compositing.

Why it applies: no cutoff_grade was stated

WND26_001Cloncurry · goldGrade: 0.01Grade Unit: g/tIntercept: 1 mView all details
Link to this fact

Identity

Hole ID
WND26_001
Project
Cloncurry
Commodity
gold
Region
australia_qld
Reported Region
australia_qld
Ticker
TNC

Geometry

Grade
0.01
Grade Unit
g/t
Intercept
1 m
From
80 m
To
81 m
Intercept Depth
80 m

Classification

Deposit Type
iocg
Sample Type
drill
Group ID
WND26_001:80-81
Mining Method
open_pit

Location

Location
Main Zone
CRS
MGA94 Zone 54
Loc. Source
document

QA/QC

Laboratory
ALS Brisbane
QA/QC Disclosed
Yes
QP Signed
Yes
QA/QC Methods
standards, blanks, duplicates

Metal Equivalent

Metal Eq. Grade
0.02
Metal Eq. Unit
% Cu-Eq
Assumptions Disclosed
Yes

Compositing

Dilution Disclosed
Yes

Review

Needs Review
No
Interp. Status
scored
Historical
No

Dates

Event date
2026-09-29T00:00:00.000Z

Reasoning: Expanded from assay table. 0.01 g/t gold is below against the open_pit mining band [5, 2, 1, 0.3] g/t. Grade×width 0.0 g/t·m is below.

Negative factors

  • 0.01 g/t gold is below the weak threshold (0.3 g/t) on the open_pit mining band.
  • Scored from rubric bands during table expansion, not from document context.

Evidence · table

“0.01”

Context: WND26_001

Tags used in scoring

QA/QC Disclosedpositive

Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).

Why it applies: qaqc_disclosed is true

Cut-off Undisclosednegative

High-grade interval reported without stating the cut-off grade used for compositing.

Why it applies: no cutoff_grade was stated

WND26_001Cloncurry · copperGrade: 0Grade Unit: %Intercept: 1 mView all details
Link to this fact

Identity

Hole ID
WND26_001
Project
Cloncurry
Commodity
copper
Region
australia_qld
Reported Region
australia_qld
Ticker
TNC

Geometry

Grade
0
Grade Unit
%
Intercept
1 m
From
81 m
To
82 m
Intercept Depth
81 m

Classification

Deposit Type
iocg
Sample Type
drill
Group ID
WND26_001:81-82
Mining Method
open_pit

Location

Location
Main Zone
CRS
MGA94 Zone 54
Loc. Source
document

QA/QC

Laboratory
ALS Brisbane
QA/QC Disclosed
Yes
QP Signed
Yes
QA/QC Methods
standards, blanks, duplicates

Metal Equivalent

Metal Eq. Grade
0.01
Metal Eq. Unit
% Cu-Eq
Assumptions Disclosed
Yes

Compositing

Dilution Disclosed
Yes

Review

Needs Review
No
Interp. Status
scored
Historical
No

Dates

Event date
2026-09-29T00:00:00.000Z

Reasoning: Expanded from assay table. 0 % copper is below against the iocg deposit band [0.9, 0.5, 0.3, 0.2] %. Grade×width 0.0 %·m is below.

Negative factors

  • 0 % copper is below the weak threshold (0.2 %) on the iocg deposit band.
  • Scored from rubric bands during table expansion, not from document context.

Evidence · table

“0.00”

Context: WND26_001

Tags used in scoring

QA/QC Disclosedpositive

Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).

Why it applies: qaqc_disclosed is true

Cut-off Undisclosednegative

High-grade interval reported without stating the cut-off grade used for compositing.

Why it applies: no cutoff_grade was stated

WND26_001Cloncurry · goldGrade: 0.01Grade Unit: g/tIntercept: 1 mView all details
Link to this fact

Identity

Hole ID
WND26_001
Project
Cloncurry
Commodity
gold
Region
australia_qld
Reported Region
australia_qld
Ticker
TNC

Geometry

Grade
0.01
Grade Unit
g/t
Intercept
1 m
From
81 m
To
82 m
Intercept Depth
81 m

Classification

Deposit Type
iocg
Sample Type
drill
Group ID
WND26_001:81-82
Mining Method
open_pit

Location

Location
Main Zone
CRS
MGA94 Zone 54
Loc. Source
document

QA/QC

Laboratory
ALS Brisbane
QA/QC Disclosed
Yes
QP Signed
Yes
QA/QC Methods
standards, blanks, duplicates

Metal Equivalent

Metal Eq. Grade
0.01
Metal Eq. Unit
% Cu-Eq
Assumptions Disclosed
Yes

Compositing

Dilution Disclosed
Yes

Review

Needs Review
No
Interp. Status
scored
Historical
No

Dates

Event date
2026-09-29T00:00:00.000Z

Reasoning: Expanded from assay table. 0.01 g/t gold is below against the open_pit mining band [5, 2, 1, 0.3] g/t. Grade×width 0.0 g/t·m is below.

Negative factors

  • 0.01 g/t gold is below the weak threshold (0.3 g/t) on the open_pit mining band.
  • Scored from rubric bands during table expansion, not from document context.

Evidence · table

“0.01”

Context: WND26_001

Tags used in scoring

QA/QC Disclosedpositive

Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).

Why it applies: qaqc_disclosed is true

Cut-off Undisclosednegative

High-grade interval reported without stating the cut-off grade used for compositing.

Why it applies: no cutoff_grade was stated

WND26_001Cloncurry · copperGrade: 0Grade Unit: %Intercept: 1 mView all details
Link to this fact

Identity

Hole ID
WND26_001
Project
Cloncurry
Commodity
copper
Region
australia_qld
Reported Region
australia_qld
Ticker
TNC

Geometry

Grade
0
Grade Unit
%
Intercept
1 m
From
82 m
To
83 m
Intercept Depth
82 m

Classification

Deposit Type
iocg
Sample Type
drill
Group ID
WND26_001:82-83
Mining Method
open_pit

Location

Location
Main Zone
CRS
MGA94 Zone 54
Loc. Source
document

QA/QC

Laboratory
ALS Brisbane
QA/QC Disclosed
Yes
QP Signed
Yes
QA/QC Methods
standards, blanks, duplicates

Metal Equivalent

Metal Eq. Grade
0.01
Metal Eq. Unit
% Cu-Eq
Assumptions Disclosed
Yes

Compositing

Dilution Disclosed
Yes

Review

Needs Review
No
Interp. Status
scored
Historical
No

Dates

Event date
2026-09-29T00:00:00.000Z

Reasoning: Expanded from assay table. 0 % copper is below against the iocg deposit band [0.9, 0.5, 0.3, 0.2] %. Grade×width 0.0 %·m is below.

Negative factors

  • 0 % copper is below the weak threshold (0.2 %) on the iocg deposit band.
  • Scored from rubric bands during table expansion, not from document context.

Evidence · table

“0.00”

Context: WND26_001

Tags used in scoring

QA/QC Disclosedpositive

Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).

Why it applies: qaqc_disclosed is true

Cut-off Undisclosednegative

High-grade interval reported without stating the cut-off grade used for compositing.

Why it applies: no cutoff_grade was stated

WND26_001Cloncurry · goldGrade: 0.01Grade Unit: g/tIntercept: 1 mView all details
Link to this fact

Identity

Hole ID
WND26_001
Project
Cloncurry
Commodity
gold
Region
australia_qld
Reported Region
australia_qld
Ticker
TNC

Geometry

Grade
0.01
Grade Unit
g/t
Intercept
1 m
From
82 m
To
83 m
Intercept Depth
82 m

Classification

Deposit Type
iocg
Sample Type
drill
Group ID
WND26_001:82-83
Mining Method
open_pit

Location

Location
Main Zone
CRS
MGA94 Zone 54
Loc. Source
document

QA/QC

Laboratory
ALS Brisbane
QA/QC Disclosed
Yes
QP Signed
Yes
QA/QC Methods
standards, blanks, duplicates

Metal Equivalent

Metal Eq. Grade
0.01
Metal Eq. Unit
% Cu-Eq
Assumptions Disclosed
Yes

Compositing

Dilution Disclosed
Yes

Review

Needs Review
No
Interp. Status
scored
Historical
No

Dates

Event date
2026-09-29T00:00:00.000Z

Reasoning: Expanded from assay table. 0.01 g/t gold is below against the open_pit mining band [5, 2, 1, 0.3] g/t. Grade×width 0.0 g/t·m is below.

Negative factors

  • 0.01 g/t gold is below the weak threshold (0.3 g/t) on the open_pit mining band.
  • Scored from rubric bands during table expansion, not from document context.

Evidence · table

“0.01”

Context: WND26_001

Tags used in scoring

QA/QC Disclosedpositive

Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).

Why it applies: qaqc_disclosed is true

Cut-off Undisclosednegative

High-grade interval reported without stating the cut-off grade used for compositing.

Why it applies: no cutoff_grade was stated

WND26_001Cloncurry · copperGrade: 0.01Grade Unit: %Intercept: 1 mView all details
Link to this fact

Identity

Hole ID
WND26_001
Project
Cloncurry
Commodity
copper
Region
australia_qld
Reported Region
australia_qld
Ticker
TNC

Geometry

Grade
0.01
Grade Unit
%
Intercept
1 m
From
83 m
To
84 m
Intercept Depth
83 m

Classification

Deposit Type
iocg
Sample Type
drill
Group ID
WND26_001:83-84
Mining Method
open_pit

Location

Location
Main Zone
CRS
MGA94 Zone 54
Loc. Source
document

QA/QC

Laboratory
ALS Brisbane
QA/QC Disclosed
Yes
QP Signed
Yes
QA/QC Methods
standards, blanks, duplicates

Metal Equivalent

Metal Eq. Grade
0.02
Metal Eq. Unit
% Cu-Eq
Assumptions Disclosed
Yes

Compositing

Dilution Disclosed
Yes

Review

Needs Review
No
Interp. Status
scored
Historical
No

Dates

Event date
2026-09-29T00:00:00.000Z

Reasoning: Expanded from assay table. 0.01 % copper is below against the iocg deposit band [0.9, 0.5, 0.3, 0.2] %. Grade×width 0.0 %·m is below.

Negative factors

  • 0.01 % copper is below the weak threshold (0.2 %) on the iocg deposit band.
  • Scored from rubric bands during table expansion, not from document context.

Evidence · table

“0.01”

Context: WND26_001

Tags used in scoring

QA/QC Disclosedpositive

Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).

Why it applies: qaqc_disclosed is true

Cut-off Undisclosednegative

High-grade interval reported without stating the cut-off grade used for compositing.

Why it applies: no cutoff_grade was stated

WND26_001Cloncurry · goldGrade: 0.01Grade Unit: g/tIntercept: 1 mView all details
Link to this fact

Identity

Hole ID
WND26_001
Project
Cloncurry
Commodity
gold
Region
australia_qld
Reported Region
australia_qld
Ticker
TNC

Geometry

Grade
0.01
Grade Unit
g/t
Intercept
1 m
From
83 m
To
84 m
Intercept Depth
83 m

Classification

Deposit Type
iocg
Sample Type
drill
Group ID
WND26_001:83-84
Mining Method
open_pit

Location

Location
Main Zone
CRS
MGA94 Zone 54
Loc. Source
document

QA/QC

Laboratory
ALS Brisbane
QA/QC Disclosed
Yes
QP Signed
Yes
QA/QC Methods
standards, blanks, duplicates

Metal Equivalent

Metal Eq. Grade
0.02
Metal Eq. Unit
% Cu-Eq
Assumptions Disclosed
Yes

Compositing

Dilution Disclosed
Yes

Review

Needs Review
No
Interp. Status
scored
Historical
No

Dates

Event date
2026-09-29T00:00:00.000Z

Reasoning: Expanded from assay table. 0.01 g/t gold is below against the open_pit mining band [5, 2, 1, 0.3] g/t. Grade×width 0.0 g/t·m is below.

Negative factors

  • 0.01 g/t gold is below the weak threshold (0.3 g/t) on the open_pit mining band.
  • Scored from rubric bands during table expansion, not from document context.

Evidence · table

“0.01”

Context: WND26_001

Tags used in scoring

QA/QC Disclosedpositive

Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).

Why it applies: qaqc_disclosed is true

Cut-off Undisclosednegative

High-grade interval reported without stating the cut-off grade used for compositing.

Why it applies: no cutoff_grade was stated

WND26_001Cloncurry · copperGrade: 0.02Grade Unit: %Intercept: 1 mView all details
Link to this fact

Identity

Hole ID
WND26_001
Project
Cloncurry
Commodity
copper
Region
australia_qld
Reported Region
australia_qld
Ticker
TNC

Geometry

Grade
0.02
Grade Unit
%
Intercept
1 m
From
84 m
To
85 m
Intercept Depth
84 m

Classification

Deposit Type
iocg
Sample Type
drill
Group ID
WND26_001:84-85
Mining Method
open_pit

Location

Location
Main Zone
CRS
MGA94 Zone 54
Loc. Source
document

QA/QC

Laboratory
ALS Brisbane
QA/QC Disclosed
Yes
QP Signed
Yes
QA/QC Methods
standards, blanks, duplicates

Metal Equivalent

Metal Eq. Grade
0.03
Metal Eq. Unit
% Cu-Eq
Assumptions Disclosed
Yes

Compositing

Dilution Disclosed
Yes

Review

Needs Review
No
Interp. Status
scored
Historical
No

Dates

Event date
2026-09-29T00:00:00.000Z

Reasoning: Expanded from assay table. 0.02 % copper is below against the iocg deposit band [0.9, 0.5, 0.3, 0.2] %. Grade×width 0.0 %·m is below.

Negative factors

  • 0.02 % copper is below the weak threshold (0.2 %) on the iocg deposit band.
  • Scored from rubric bands during table expansion, not from document context.

Evidence · table

“0.02”

Context: WND26_001

Tags used in scoring

QA/QC Disclosedpositive

Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).

Why it applies: qaqc_disclosed is true

Cut-off Undisclosednegative

High-grade interval reported without stating the cut-off grade used for compositing.

Why it applies: no cutoff_grade was stated

WND26_001Cloncurry · goldGrade: 0.01Grade Unit: g/tIntercept: 1 mView all details
Link to this fact

Identity

Hole ID
WND26_001
Project
Cloncurry
Commodity
gold
Region
australia_qld
Reported Region
australia_qld
Ticker
TNC

Geometry

Grade
0.01
Grade Unit
g/t
Intercept
1 m
From
84 m
To
85 m
Intercept Depth
84 m

Classification

Deposit Type
iocg
Sample Type
drill
Group ID
WND26_001:84-85
Mining Method
open_pit

Location

Location
Main Zone
CRS
MGA94 Zone 54
Loc. Source
document

QA/QC

Laboratory
ALS Brisbane
QA/QC Disclosed
Yes
QP Signed
Yes
QA/QC Methods
standards, blanks, duplicates

Metal Equivalent

Metal Eq. Grade
0.03
Metal Eq. Unit
% Cu-Eq
Assumptions Disclosed
Yes

Compositing

Dilution Disclosed
Yes

Review

Needs Review
No
Interp. Status
scored
Historical
No

Dates

Event date
2026-09-29T00:00:00.000Z

Reasoning: Expanded from assay table. 0.01 g/t gold is below against the open_pit mining band [5, 2, 1, 0.3] g/t. Grade×width 0.0 g/t·m is below.

Negative factors

  • 0.01 g/t gold is below the weak threshold (0.3 g/t) on the open_pit mining band.
  • Scored from rubric bands during table expansion, not from document context.

Evidence · table

“0.01”

Context: WND26_001

Tags used in scoring

QA/QC Disclosedpositive

Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).

Why it applies: qaqc_disclosed is true

Cut-off Undisclosednegative

High-grade interval reported without stating the cut-off grade used for compositing.

Why it applies: no cutoff_grade was stated

WND26_001Cloncurry · copperGrade: 0.01Grade Unit: %Intercept: 1 mView all details
Link to this fact

Identity

Hole ID
WND26_001
Project
Cloncurry
Commodity
copper
Region
australia_qld
Reported Region
australia_qld
Ticker
TNC

Geometry

Grade
0.01
Grade Unit
%
Intercept
1 m
From
85 m
To
86 m
Intercept Depth
85 m

Classification

Deposit Type
iocg
Sample Type
drill
Group ID
WND26_001:85-86
Mining Method
open_pit

Location

Location
Main Zone
CRS
MGA94 Zone 54
Loc. Source
document

QA/QC

Laboratory
ALS Brisbane
QA/QC Disclosed
Yes
QP Signed
Yes
QA/QC Methods
standards, blanks, duplicates

Metal Equivalent

Metal Eq. Grade
0.02
Metal Eq. Unit
% Cu-Eq
Assumptions Disclosed
Yes

Compositing

Dilution Disclosed
Yes

Review

Needs Review
No
Interp. Status
scored
Historical
No

Dates

Event date
2026-09-29T00:00:00.000Z

Reasoning: Expanded from assay table. 0.01 % copper is below against the iocg deposit band [0.9, 0.5, 0.3, 0.2] %. Grade×width 0.0 %·m is below.

Negative factors

  • 0.01 % copper is below the weak threshold (0.2 %) on the iocg deposit band.
  • Scored from rubric bands during table expansion, not from document context.

Evidence · table

“0.01”

Context: WND26_001

Tags used in scoring

QA/QC Disclosedpositive

Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).

Why it applies: qaqc_disclosed is true

Cut-off Undisclosednegative

High-grade interval reported without stating the cut-off grade used for compositing.

Why it applies: no cutoff_grade was stated

WND26_001Cloncurry · goldGrade: 0.01Grade Unit: g/tIntercept: 1 mView all details
Link to this fact

Identity

Hole ID
WND26_001
Project
Cloncurry
Commodity
gold
Region
australia_qld
Reported Region
australia_qld
Ticker
TNC

Geometry

Grade
0.01
Grade Unit
g/t
Intercept
1 m
From
85 m
To
86 m
Intercept Depth
85 m

Classification

Deposit Type
iocg
Sample Type
drill
Group ID
WND26_001:85-86
Mining Method
open_pit

Location

Location
Main Zone
CRS
MGA94 Zone 54
Loc. Source
document

QA/QC

Laboratory
ALS Brisbane
QA/QC Disclosed
Yes
QP Signed
Yes
QA/QC Methods
standards, blanks, duplicates

Metal Equivalent

Metal Eq. Grade
0.02
Metal Eq. Unit
% Cu-Eq
Assumptions Disclosed
Yes

Compositing

Dilution Disclosed
Yes

Review

Needs Review
No
Interp. Status
scored
Historical
No

Dates

Event date
2026-09-29T00:00:00.000Z

Reasoning: Expanded from assay table. 0.01 g/t gold is below against the open_pit mining band [5, 2, 1, 0.3] g/t. Grade×width 0.0 g/t·m is below.

Negative factors

  • 0.01 g/t gold is below the weak threshold (0.3 g/t) on the open_pit mining band.
  • Scored from rubric bands during table expansion, not from document context.

Evidence · table

“0.01”

Context: WND26_001

Tags used in scoring

QA/QC Disclosedpositive

Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).

Why it applies: qaqc_disclosed is true

Cut-off Undisclosednegative

High-grade interval reported without stating the cut-off grade used for compositing.

Why it applies: no cutoff_grade was stated

WND26_001Cloncurry · copperGrade: 0.03Grade Unit: %Intercept: 1 mView all details
Link to this fact

Identity

Hole ID
WND26_001
Project
Cloncurry
Commodity
copper
Region
australia_qld
Reported Region
australia_qld
Ticker
TNC

Geometry

Grade
0.03
Grade Unit
%
Intercept
1 m
From
86 m
To
87 m
Intercept Depth
86 m

Classification

Deposit Type
iocg
Sample Type
drill
Group ID
WND26_001:86-87
Mining Method
open_pit

Location

Location
Main Zone
CRS
MGA94 Zone 54
Loc. Source
document

QA/QC

Laboratory
ALS Brisbane
QA/QC Disclosed
Yes
QP Signed
Yes
QA/QC Methods
standards, blanks, duplicates

Metal Equivalent

Metal Eq. Grade
0.04
Metal Eq. Unit
% Cu-Eq
Assumptions Disclosed
Yes

Compositing

Dilution Disclosed
Yes

Review

Needs Review
No
Interp. Status
scored
Historical
No

Dates

Event date
2026-09-29T00:00:00.000Z

Reasoning: Expanded from assay table. 0.03 % copper is below against the iocg deposit band [0.9, 0.5, 0.3, 0.2] %. Grade×width 0.0 %·m is below.

Negative factors

  • 0.03 % copper is below the weak threshold (0.2 %) on the iocg deposit band.
  • Scored from rubric bands during table expansion, not from document context.

Evidence · table

“0.03”

Context: WND26_001

Tags used in scoring

QA/QC Disclosedpositive

Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).

Why it applies: qaqc_disclosed is true

Cut-off Undisclosednegative

High-grade interval reported without stating the cut-off grade used for compositing.

Why it applies: no cutoff_grade was stated

WND26_001Cloncurry · goldGrade: 0.01Grade Unit: g/tIntercept: 1 mView all details
Link to this fact

Identity

Hole ID
WND26_001
Project
Cloncurry
Commodity
gold
Region
australia_qld
Reported Region
australia_qld
Ticker
TNC

Geometry

Grade
0.01
Grade Unit
g/t
Intercept
1 m
From
86 m
To
87 m
Intercept Depth
86 m

Classification

Deposit Type
iocg
Sample Type
drill
Group ID
WND26_001:86-87
Mining Method
open_pit

Location

Location
Main Zone
CRS
MGA94 Zone 54
Loc. Source
document

QA/QC

Laboratory
ALS Brisbane
QA/QC Disclosed
Yes
QP Signed
Yes
QA/QC Methods
standards, blanks, duplicates

Metal Equivalent

Metal Eq. Grade
0.04
Metal Eq. Unit
% Cu-Eq
Assumptions Disclosed
Yes

Compositing

Dilution Disclosed
Yes

Review

Needs Review
No
Interp. Status
scored
Historical
No

Dates

Event date
2026-09-29T00:00:00.000Z

Reasoning: Expanded from assay table. 0.01 g/t gold is below against the open_pit mining band [5, 2, 1, 0.3] g/t. Grade×width 0.0 g/t·m is below.

Negative factors

  • 0.01 g/t gold is below the weak threshold (0.3 g/t) on the open_pit mining band.
  • Scored from rubric bands during table expansion, not from document context.

Evidence · table

“0.01”

Context: WND26_001

Tags used in scoring

QA/QC Disclosedpositive

Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).

Why it applies: qaqc_disclosed is true

Cut-off Undisclosednegative

High-grade interval reported without stating the cut-off grade used for compositing.

Why it applies: no cutoff_grade was stated

WND26_001Cloncurry · copperGrade: 0.01Grade Unit: %Intercept: 1 mView all details
Link to this fact

Identity

Hole ID
WND26_001
Project
Cloncurry
Commodity
copper
Region
australia_qld
Reported Region
australia_qld
Ticker
TNC

Geometry

Grade
0.01
Grade Unit
%
Intercept
1 m
From
87 m
To
88 m
Intercept Depth
87 m

Classification

Deposit Type
iocg
Sample Type
drill
Group ID
WND26_001:87-88
Mining Method
open_pit

Location

Location
Main Zone
CRS
MGA94 Zone 54
Loc. Source
document

QA/QC

Laboratory
ALS Brisbane
QA/QC Disclosed
Yes
QP Signed
Yes
QA/QC Methods
standards, blanks, duplicates

Metal Equivalent

Metal Eq. Grade
0.02
Metal Eq. Unit
% Cu-Eq
Assumptions Disclosed
Yes

Compositing

Dilution Disclosed
Yes

Review

Needs Review
No
Interp. Status
scored
Historical
No

Dates

Event date
2026-09-29T00:00:00.000Z

Reasoning: Expanded from assay table. 0.01 % copper is below against the iocg deposit band [0.9, 0.5, 0.3, 0.2] %. Grade×width 0.0 %·m is below.

Negative factors

  • 0.01 % copper is below the weak threshold (0.2 %) on the iocg deposit band.
  • Scored from rubric bands during table expansion, not from document context.

Evidence · table

“0.01”

Context: WND26_001

Tags used in scoring

QA/QC Disclosedpositive

Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).

Why it applies: qaqc_disclosed is true

Cut-off Undisclosednegative

High-grade interval reported without stating the cut-off grade used for compositing.

Why it applies: no cutoff_grade was stated

WND26_001Cloncurry · goldGrade: 0.01Grade Unit: g/tIntercept: 1 mView all details
Link to this fact

Identity

Hole ID
WND26_001
Project
Cloncurry
Commodity
gold
Region
australia_qld
Reported Region
australia_qld
Ticker
TNC

Geometry

Grade
0.01
Grade Unit
g/t
Intercept
1 m
From
87 m
To
88 m
Intercept Depth
87 m

Classification

Deposit Type
iocg
Sample Type
drill
Group ID
WND26_001:87-88
Mining Method
open_pit

Location

Location
Main Zone
CRS
MGA94 Zone 54
Loc. Source
document

QA/QC

Laboratory
ALS Brisbane
QA/QC Disclosed
Yes
QP Signed
Yes
QA/QC Methods
standards, blanks, duplicates

Metal Equivalent

Metal Eq. Grade
0.02
Metal Eq. Unit
% Cu-Eq
Assumptions Disclosed
Yes

Compositing

Dilution Disclosed
Yes

Review

Needs Review
No
Interp. Status
scored
Historical
No

Dates

Event date
2026-09-29T00:00:00.000Z

Reasoning: Expanded from assay table. 0.01 g/t gold is below against the open_pit mining band [5, 2, 1, 0.3] g/t. Grade×width 0.0 g/t·m is below.

Negative factors

  • 0.01 g/t gold is below the weak threshold (0.3 g/t) on the open_pit mining band.
  • Scored from rubric bands during table expansion, not from document context.

Evidence · table

“0.01”

Context: WND26_001

Tags used in scoring

QA/QC Disclosedpositive

Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).

Why it applies: qaqc_disclosed is true

Cut-off Undisclosednegative

High-grade interval reported without stating the cut-off grade used for compositing.

Why it applies: no cutoff_grade was stated

WND26_001Cloncurry · copperGrade: 0.03Grade Unit: %Intercept: 1 mView all details
Link to this fact

Identity

Hole ID
WND26_001
Project
Cloncurry
Commodity
copper
Region
australia_qld
Reported Region
australia_qld
Ticker
TNC

Geometry

Grade
0.03
Grade Unit
%
Intercept
1 m
From
139 m
To
140 m
Intercept Depth
139 m

Classification

Deposit Type
iocg
Sample Type
drill
Group ID
WND26_001:139-140
Mining Method
open_pit

Location

Location
Main Zone
CRS
MGA94 Zone 54
Loc. Source
document

QA/QC

Laboratory
ALS Brisbane
QA/QC Disclosed
Yes
QP Signed
Yes
QA/QC Methods
standards, blanks, duplicates

Metal Equivalent

Metal Eq. Grade
0.04
Metal Eq. Unit
% Cu-Eq
Assumptions Disclosed
Yes

Compositing

Dilution Disclosed
Yes

Review

Needs Review
No
Interp. Status
scored
Historical
No

Dates

Event date
2026-09-29T00:00:00.000Z

Reasoning: Expanded from assay table. 0.03 % copper is below against the iocg deposit band [0.9, 0.5, 0.3, 0.2] %. Grade×width 0.0 %·m is below.

Negative factors

  • 0.03 % copper is below the weak threshold (0.2 %) on the iocg deposit band.
  • Scored from rubric bands during table expansion, not from document context.

Evidence · table

“0.03”

Context: WND26_001

Tags used in scoring

QA/QC Disclosedpositive

Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).

Why it applies: qaqc_disclosed is true

Cut-off Undisclosednegative

High-grade interval reported without stating the cut-off grade used for compositing.

Why it applies: no cutoff_grade was stated

WND26_001Cloncurry · goldGrade: 0.01Grade Unit: g/tIntercept: 1 mView all details
Link to this fact

Identity

Hole ID
WND26_001
Project
Cloncurry
Commodity
gold
Region
australia_qld
Reported Region
australia_qld
Ticker
TNC

Geometry

Grade
0.01
Grade Unit
g/t
Intercept
1 m
From
139 m
To
140 m
Intercept Depth
139 m

Classification

Deposit Type
iocg
Sample Type
drill
Group ID
WND26_001:139-140
Mining Method
open_pit

Location

Location
Main Zone
CRS
MGA94 Zone 54
Loc. Source
document

QA/QC

Laboratory
ALS Brisbane
QA/QC Disclosed
Yes
QP Signed
Yes
QA/QC Methods
standards, blanks, duplicates

Metal Equivalent

Metal Eq. Grade
0.04
Metal Eq. Unit
% Cu-Eq
Assumptions Disclosed
Yes

Compositing

Dilution Disclosed
Yes

Review

Needs Review
No
Interp. Status
scored
Historical
No

Dates

Event date
2026-09-29T00:00:00.000Z

Reasoning: Expanded from assay table. 0.01 g/t gold is below against the open_pit mining band [5, 2, 1, 0.3] g/t. Grade×width 0.0 g/t·m is below.

Negative factors

  • 0.01 g/t gold is below the weak threshold (0.3 g/t) on the open_pit mining band.
  • Scored from rubric bands during table expansion, not from document context.

Evidence · table

“0.01”

Context: WND26_001

Tags used in scoring

QA/QC Disclosedpositive

Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).

Why it applies: qaqc_disclosed is true

Cut-off Undisclosednegative

High-grade interval reported without stating the cut-off grade used for compositing.

Why it applies: no cutoff_grade was stated

WND26_001Cloncurry · copperGrade: 0.29Grade Unit: %Intercept: 1 mView all details
Link to this fact

Identity

Hole ID
WND26_001
Project
Cloncurry
Commodity
copper
Region
australia_qld
Reported Region
australia_qld
Ticker
TNC

Geometry

Grade
0.29
Grade Unit
%
Intercept
1 m
From
140 m
To
141 m
Intercept Depth
140 m

Classification

Deposit Type
iocg
Sample Type
drill
Group ID
WND26_001:140-141
Mining Method
open_pit

Location

Location
Main Zone
CRS
MGA94 Zone 54
Loc. Source
document

QA/QC

Laboratory
ALS Brisbane
QA/QC Disclosed
Yes
QP Signed
Yes
QA/QC Methods
standards, blanks, duplicates

Metal Equivalent

Metal Eq. Grade
0.45
Metal Eq. Unit
% Cu-Eq
Assumptions Disclosed
Yes

Compositing

Dilution Disclosed
Yes

Review

Needs Review
No
Interp. Status
scored
Historical
No

Dates

Event date
2026-09-29T00:00:00.000Z

Reasoning: Expanded from assay table. 0.29 % copper is weak against the iocg deposit band [0.9, 0.5, 0.3, 0.2] %. Grade×width 0.3 %·m is below (grade alone is weak; the better of the two is used).

Negative factors

  • Scored from rubric bands during table expansion, not from document context.

Evidence · table

“0.29”

Context: WND26_001

Tags used in scoring

QA/QC Disclosedpositive

Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).

Why it applies: qaqc_disclosed is true

Cut-off Undisclosednegative

High-grade interval reported without stating the cut-off grade used for compositing.

Why it applies: no cutoff_grade was stated

WND26_001Cloncurry · goldGrade: 0.16Grade Unit: g/tIntercept: 1 mView all details
Link to this fact

Identity

Hole ID
WND26_001
Project
Cloncurry
Commodity
gold
Region
australia_qld
Reported Region
australia_qld
Ticker
TNC

Geometry

Grade
0.16
Grade Unit
g/t
Intercept
1 m
From
140 m
To
141 m
Intercept Depth
140 m

Classification

Deposit Type
iocg
Sample Type
drill
Group ID
WND26_001:140-141
Mining Method
open_pit

Location

Location
Main Zone
CRS
MGA94 Zone 54
Loc. Source
document

QA/QC

Laboratory
ALS Brisbane
QA/QC Disclosed
Yes
QP Signed
Yes
QA/QC Methods
standards, blanks, duplicates

Metal Equivalent

Metal Eq. Grade
0.45
Metal Eq. Unit
% Cu-Eq
Assumptions Disclosed
Yes

Compositing

Dilution Disclosed
Yes

Review

Needs Review
No
Interp. Status
scored
Historical
No

Dates

Event date
2026-09-29T00:00:00.000Z

Reasoning: Expanded from assay table. 0.16 g/t gold is below against the open_pit mining band [5, 2, 1, 0.3] g/t. Grade×width 0.2 g/t·m is below.

Negative factors

  • 0.16 g/t gold is below the weak threshold (0.3 g/t) on the open_pit mining band.
  • Scored from rubric bands during table expansion, not from document context.

Evidence · table

“0.16”

Context: WND26_001

Tags used in scoring

QA/QC Disclosedpositive

Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).

Why it applies: qaqc_disclosed is true

Cut-off Undisclosednegative

High-grade interval reported without stating the cut-off grade used for compositing.

Why it applies: no cutoff_grade was stated

WND26_001Cloncurry · copperGrade: 0.35Grade Unit: %Intercept: 1 mView all details
Link to this fact

Identity

Hole ID
WND26_001
Project
Cloncurry
Commodity
copper
Region
australia_qld
Reported Region
australia_qld
Ticker
TNC

Geometry

Grade
0.35
Grade Unit
%
Intercept
1 m
From
141 m
To
142 m
Intercept Depth
141 m

Classification

Deposit Type
iocg
Sample Type
drill
Group ID
WND26_001:141-142
Mining Method
open_pit

Location

Location
Main Zone
CRS
MGA94 Zone 54
Loc. Source
document

QA/QC

Laboratory
ALS Brisbane
QA/QC Disclosed
Yes
QP Signed
Yes
QA/QC Methods
standards, blanks, duplicates

Metal Equivalent

Metal Eq. Grade
0.42
Metal Eq. Unit
% Cu-Eq
Assumptions Disclosed
Yes

Compositing

Dilution Disclosed
Yes

Review

Needs Review
No
Interp. Status
scored
Historical
No

Dates

Event date
2026-09-29T00:00:00.000Z

Reasoning: Expanded from assay table. 0.35 % copper is moderate against the iocg deposit band [0.9, 0.5, 0.3, 0.2] %. Grade×width 0.3 %·m is below (grade alone is moderate; the better of the two is used).

Negative factors

  • Scored from rubric bands during table expansion, not from document context.

Evidence · table

“0.35”

Context: WND26_001

Tags used in scoring

QA/QC Disclosedpositive

Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).

Why it applies: qaqc_disclosed is true

Cut-off Undisclosednegative

High-grade interval reported without stating the cut-off grade used for compositing.

Why it applies: no cutoff_grade was stated

WND26_001Cloncurry · goldGrade: 0.07Grade Unit: g/tIntercept: 1 mView all details
Link to this fact

Identity

Hole ID
WND26_001
Project
Cloncurry
Commodity
gold
Region
australia_qld
Reported Region
australia_qld
Ticker
TNC

Geometry

Grade
0.07
Grade Unit
g/t
Intercept
1 m
From
141 m
To
142 m
Intercept Depth
141 m

Classification

Deposit Type
iocg
Sample Type
drill
Group ID
WND26_001:141-142
Mining Method
open_pit

Location

Location
Main Zone
CRS
MGA94 Zone 54
Loc. Source
document

QA/QC

Laboratory
ALS Brisbane
QA/QC Disclosed
Yes
QP Signed
Yes
QA/QC Methods
standards, blanks, duplicates

Metal Equivalent

Metal Eq. Grade
0.42
Metal Eq. Unit
% Cu-Eq
Assumptions Disclosed
Yes

Compositing

Dilution Disclosed
Yes

Review

Needs Review
No
Interp. Status
scored
Historical
No

Dates

Event date
2026-09-29T00:00:00.000Z

Reasoning: Expanded from assay table. 0.07 g/t gold is below against the open_pit mining band [5, 2, 1, 0.3] g/t. Grade×width 0.1 g/t·m is below.

Negative factors

  • 0.07 g/t gold is below the weak threshold (0.3 g/t) on the open_pit mining band.
  • Scored from rubric bands during table expansion, not from document context.

Evidence · table

“0.07”

Context: WND26_001

Tags used in scoring

QA/QC Disclosedpositive

Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).

Why it applies: qaqc_disclosed is true

Cut-off Undisclosednegative

High-grade interval reported without stating the cut-off grade used for compositing.

Why it applies: no cutoff_grade was stated

WND26_001Cloncurry · copperGrade: 0.05Grade Unit: %Intercept: 1 mView all details
Link to this fact

Identity

Hole ID
WND26_001
Project
Cloncurry
Commodity
copper
Region
australia_qld
Reported Region
australia_qld
Ticker
TNC

Geometry

Grade
0.05
Grade Unit
%
Intercept
1 m
From
142 m
To
143 m
Intercept Depth
142 m

Classification

Deposit Type
iocg
Sample Type
drill
Group ID
WND26_001:142-143
Mining Method
open_pit

Location

Location
Main Zone
CRS
MGA94 Zone 54
Loc. Source
document

QA/QC

Laboratory
ALS Brisbane
QA/QC Disclosed
Yes
QP Signed
Yes
QA/QC Methods
standards, blanks, duplicates

Metal Equivalent

Metal Eq. Grade
0.07
Metal Eq. Unit
% Cu-Eq
Assumptions Disclosed
Yes

Compositing

Dilution Disclosed
Yes

Review

Needs Review
No
Interp. Status
scored
Historical
No

Dates

Event date
2026-09-29T00:00:00.000Z

Reasoning: Expanded from assay table. 0.05 % copper is below against the iocg deposit band [0.9, 0.5, 0.3, 0.2] %. Grade×width 0.1 %·m is below.

Negative factors

  • 0.05 % copper is below the weak threshold (0.2 %) on the iocg deposit band.
  • Scored from rubric bands during table expansion, not from document context.

Evidence · table

“0.05”

Context: WND26_001

Tags used in scoring

QA/QC Disclosedpositive

Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).

Why it applies: qaqc_disclosed is true

Cut-off Undisclosednegative

High-grade interval reported without stating the cut-off grade used for compositing.

Why it applies: no cutoff_grade was stated

WND26_001Cloncurry · goldGrade: 0.02Grade Unit: g/tIntercept: 1 mView all details
Link to this fact

Identity

Hole ID
WND26_001
Project
Cloncurry
Commodity
gold
Region
australia_qld
Reported Region
australia_qld
Ticker
TNC

Geometry

Grade
0.02
Grade Unit
g/t
Intercept
1 m
From
142 m
To
143 m
Intercept Depth
142 m

Classification

Deposit Type
iocg
Sample Type
drill
Group ID
WND26_001:142-143
Mining Method
open_pit

Location

Location
Main Zone
CRS
MGA94 Zone 54
Loc. Source
document

QA/QC

Laboratory
ALS Brisbane
QA/QC Disclosed
Yes
QP Signed
Yes
QA/QC Methods
standards, blanks, duplicates

Metal Equivalent

Metal Eq. Grade
0.07
Metal Eq. Unit
% Cu-Eq
Assumptions Disclosed
Yes

Compositing

Dilution Disclosed
Yes

Review

Needs Review
No
Interp. Status
scored
Historical
No

Dates

Event date
2026-09-29T00:00:00.000Z

Reasoning: Expanded from assay table. 0.02 g/t gold is below against the open_pit mining band [5, 2, 1, 0.3] g/t. Grade×width 0.0 g/t·m is below.

Negative factors

  • 0.02 g/t gold is below the weak threshold (0.3 g/t) on the open_pit mining band.
  • Scored from rubric bands during table expansion, not from document context.

Evidence · table

“0.02”

Context: WND26_001

Tags used in scoring

QA/QC Disclosedpositive

Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).

Why it applies: qaqc_disclosed is true

Cut-off Undisclosednegative

High-grade interval reported without stating the cut-off grade used for compositing.

Why it applies: no cutoff_grade was stated

WND26_001Cloncurry · copperGrade: 0.25Grade Unit: %Intercept: 1 mView all details
Link to this fact

Identity

Hole ID
WND26_001
Project
Cloncurry
Commodity
copper
Region
australia_qld
Reported Region
australia_qld
Ticker
TNC

Geometry

Grade
0.25
Grade Unit
%
Intercept
1 m
From
143 m
To
144 m
Intercept Depth
143 m

Classification

Deposit Type
iocg
Sample Type
drill
Group ID
WND26_001:143-144
Mining Method
open_pit

Location

Location
Main Zone
CRS
MGA94 Zone 54
Loc. Source
document

QA/QC

Laboratory
ALS Brisbane
QA/QC Disclosed
Yes
QP Signed
Yes
QA/QC Methods
standards, blanks, duplicates

Metal Equivalent

Metal Eq. Grade
1.45
Metal Eq. Unit
% Cu-Eq
Assumptions Disclosed
Yes

Compositing

Dilution Disclosed
Yes

Review

Needs Review
No
Interp. Status
scored
Historical
No

Dates

Event date
2026-09-29T00:00:00.000Z

Reasoning: Expanded from assay table. 0.25 % copper is weak against the iocg deposit band [0.9, 0.5, 0.3, 0.2] %. Grade×width 0.3 %·m is below (grade alone is weak; the better of the two is used).

Negative factors

  • Scored from rubric bands during table expansion, not from document context.

Evidence · table

“0.25”

Context: WND26_001

Tags used in scoring

QA/QC Disclosedpositive

Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).

Why it applies: qaqc_disclosed is true

Cut-off Undisclosednegative

High-grade interval reported without stating the cut-off grade used for compositing.

Why it applies: no cutoff_grade was stated

WND26_001Cloncurry · goldGrade: 1.18Grade Unit: g/tIntercept: 1 mView all details
Link to this fact

Identity

Hole ID
WND26_001
Project
Cloncurry
Commodity
gold
Region
australia_qld
Reported Region
australia_qld
Ticker
TNC

Geometry

Grade
1.18
Grade Unit
g/t
Intercept
1 m
From
143 m
To
144 m
Intercept Depth
143 m

Classification

Deposit Type
iocg
Sample Type
drill
Group ID
WND26_001:143-144
Mining Method
open_pit

Location

Location
Main Zone
CRS
MGA94 Zone 54
Loc. Source
document

QA/QC

Laboratory
ALS Brisbane
QA/QC Disclosed
Yes
QP Signed
Yes
QA/QC Methods
standards, blanks, duplicates

Metal Equivalent

Metal Eq. Grade
1.45
Metal Eq. Unit
% Cu-Eq
Assumptions Disclosed
Yes

Compositing

Dilution Disclosed
Yes

Review

Needs Review
No
Interp. Status
scored
Historical
No

Dates

Event date
2026-09-29T00:00:00.000Z

Reasoning: Expanded from assay table. 1.18 g/t gold is moderate against the open_pit mining band [5, 2, 1, 0.3] g/t. Grade×width 1.2 g/t·m is below (grade alone is moderate; the better of the two is used).

Negative factors

  • Scored from rubric bands during table expansion, not from document context.

Evidence · table

“1.18”

Context: WND26_001

Tags used in scoring

QA/QC Disclosedpositive

Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).

Why it applies: qaqc_disclosed is true

Cut-off Undisclosednegative

High-grade interval reported without stating the cut-off grade used for compositing.

Why it applies: no cutoff_grade was stated

WND26_001Cloncurry · copperGrade: 0.11Grade Unit: %Intercept: 1 mView all details
Link to this fact

Identity

Hole ID
WND26_001
Project
Cloncurry
Commodity
copper
Region
australia_qld
Reported Region
australia_qld
Ticker
TNC

Geometry

Grade
0.11
Grade Unit
%
Intercept
1 m
From
144 m
To
145 m
Intercept Depth
144 m

Classification

Deposit Type
iocg
Sample Type
drill
Group ID
WND26_001:144-145
Mining Method
open_pit

Location

Location
Main Zone
CRS
MGA94 Zone 54
Loc. Source
document

QA/QC

Laboratory
ALS Brisbane
QA/QC Disclosed
Yes
QP Signed
Yes
QA/QC Methods
standards, blanks, duplicates

Metal Equivalent

Metal Eq. Grade
0.16
Metal Eq. Unit
% Cu-Eq
Assumptions Disclosed
Yes

Compositing

Dilution Disclosed
Yes

Review

Needs Review
No
Interp. Status
scored
Historical
No

Dates

Event date
2026-09-29T00:00:00.000Z

Reasoning: Expanded from assay table. 0.11 % copper is below against the iocg deposit band [0.9, 0.5, 0.3, 0.2] %. Grade×width 0.1 %·m is below.

Negative factors

  • 0.11 % copper is below the weak threshold (0.2 %) on the iocg deposit band.
  • Scored from rubric bands during table expansion, not from document context.

Evidence · table

“0.11”

Context: WND26_001

Tags used in scoring

QA/QC Disclosedpositive

Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).

Why it applies: qaqc_disclosed is true

Cut-off Undisclosednegative

High-grade interval reported without stating the cut-off grade used for compositing.

Why it applies: no cutoff_grade was stated

WND26_001Cloncurry · goldGrade: 0.05Grade Unit: g/tIntercept: 1 mView all details
Link to this fact

Identity

Hole ID
WND26_001
Project
Cloncurry
Commodity
gold
Region
australia_qld
Reported Region
australia_qld
Ticker
TNC

Geometry

Grade
0.05
Grade Unit
g/t
Intercept
1 m
From
144 m
To
145 m
Intercept Depth
144 m

Classification

Deposit Type
iocg
Sample Type
drill
Group ID
WND26_001:144-145
Mining Method
open_pit

Location

Location
Main Zone
CRS
MGA94 Zone 54
Loc. Source
document

QA/QC

Laboratory
ALS Brisbane
QA/QC Disclosed
Yes
QP Signed
Yes
QA/QC Methods
standards, blanks, duplicates

Metal Equivalent

Metal Eq. Grade
0.16
Metal Eq. Unit
% Cu-Eq
Assumptions Disclosed
Yes

Compositing

Dilution Disclosed
Yes

Review

Needs Review
No
Interp. Status
scored
Historical
No

Dates

Event date
2026-09-29T00:00:00.000Z

Reasoning: Expanded from assay table. 0.05 g/t gold is below against the open_pit mining band [5, 2, 1, 0.3] g/t. Grade×width 0.1 g/t·m is below.

Negative factors

  • 0.05 g/t gold is below the weak threshold (0.3 g/t) on the open_pit mining band.
  • Scored from rubric bands during table expansion, not from document context.

Evidence · table

“0.05”

Context: WND26_001

Tags used in scoring

QA/QC Disclosedpositive

Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).

Why it applies: qaqc_disclosed is true

Cut-off Undisclosednegative

High-grade interval reported without stating the cut-off grade used for compositing.

Why it applies: no cutoff_grade was stated

WND26_001Cloncurry · copperGrade: 0.01Grade Unit: %Intercept: 1 mView all details
Link to this fact

Identity

Hole ID
WND26_001
Project
Cloncurry
Commodity
copper
Region
australia_qld
Reported Region
australia_qld
Ticker
TNC

Geometry

Grade
0.01
Grade Unit
%
Intercept
1 m
From
145 m
To
146 m
Intercept Depth
145 m

Classification

Deposit Type
iocg
Sample Type
drill
Group ID
WND26_001:145-146
Mining Method
open_pit

Location

Location
Main Zone
CRS
MGA94 Zone 54
Loc. Source
document

QA/QC

Laboratory
ALS Brisbane
QA/QC Disclosed
Yes
QP Signed
Yes
QA/QC Methods
standards, blanks, duplicates

Metal Equivalent

Metal Eq. Grade
0.02
Metal Eq. Unit
% Cu-Eq
Assumptions Disclosed
Yes

Compositing

Dilution Disclosed
Yes

Review

Needs Review
No
Interp. Status
scored
Historical
No

Dates

Event date
2026-09-29T00:00:00.000Z

Reasoning: Expanded from assay table. 0.01 % copper is below against the iocg deposit band [0.9, 0.5, 0.3, 0.2] %. Grade×width 0.0 %·m is below.

Negative factors

  • 0.01 % copper is below the weak threshold (0.2 %) on the iocg deposit band.
  • Scored from rubric bands during table expansion, not from document context.

Evidence · table

“0.01”

Context: WND26_001

Tags used in scoring

QA/QC Disclosedpositive

Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).

Why it applies: qaqc_disclosed is true

Cut-off Undisclosednegative

High-grade interval reported without stating the cut-off grade used for compositing.

Why it applies: no cutoff_grade was stated

WND26_001Cloncurry · goldGrade: 0.01Grade Unit: g/tIntercept: 1 mView all details
Link to this fact

Identity

Hole ID
WND26_001
Project
Cloncurry
Commodity
gold
Region
australia_qld
Reported Region
australia_qld
Ticker
TNC

Geometry

Grade
0.01
Grade Unit
g/t
Intercept
1 m
From
145 m
To
146 m
Intercept Depth
145 m

Classification

Deposit Type
iocg
Sample Type
drill
Group ID
WND26_001:145-146
Mining Method
open_pit

Location

Location
Main Zone
CRS
MGA94 Zone 54
Loc. Source
document

QA/QC

Laboratory
ALS Brisbane
QA/QC Disclosed
Yes
QP Signed
Yes
QA/QC Methods
standards, blanks, duplicates

Metal Equivalent

Metal Eq. Grade
0.02
Metal Eq. Unit
% Cu-Eq
Assumptions Disclosed
Yes

Compositing

Dilution Disclosed
Yes

Review

Needs Review
No
Interp. Status
scored
Historical
No

Dates

Event date
2026-09-29T00:00:00.000Z

Reasoning: Expanded from assay table. 0.01 g/t gold is below against the open_pit mining band [5, 2, 1, 0.3] g/t. Grade×width 0.0 g/t·m is below.

Negative factors

  • 0.01 g/t gold is below the weak threshold (0.3 g/t) on the open_pit mining band.
  • Scored from rubric bands during table expansion, not from document context.

Evidence · table

“0.01”

Context: WND26_001

Tags used in scoring

QA/QC Disclosedpositive

Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).

Why it applies: qaqc_disclosed is true

Cut-off Undisclosednegative

High-grade interval reported without stating the cut-off grade used for compositing.

Why it applies: no cutoff_grade was stated

WND26_001Cloncurry · copperGrade: 0.01Grade Unit: %Intercept: 1 mView all details
Link to this fact

Identity

Hole ID
WND26_001
Project
Cloncurry
Commodity
copper
Region
australia_qld
Reported Region
australia_qld
Ticker
TNC

Geometry

Grade
0.01
Grade Unit
%
Intercept
1 m
From
146 m
To
147 m
Intercept Depth
146 m

Classification

Deposit Type
iocg
Sample Type
drill
Group ID
WND26_001:146-147
Mining Method
open_pit

Location

Location
Main Zone
CRS
MGA94 Zone 54
Loc. Source
document

QA/QC

Laboratory
ALS Brisbane
QA/QC Disclosed
Yes
QP Signed
Yes
QA/QC Methods
standards, blanks, duplicates

Metal Equivalent

Metal Eq. Grade
0.03
Metal Eq. Unit
% Cu-Eq
Assumptions Disclosed
Yes

Compositing

Dilution Disclosed
Yes

Review

Needs Review
No
Interp. Status
scored
Historical
No

Dates

Event date
2026-09-29T00:00:00.000Z

Reasoning: Expanded from assay table. 0.01 % copper is below against the iocg deposit band [0.9, 0.5, 0.3, 0.2] %. Grade×width 0.0 %·m is below.

Negative factors

  • 0.01 % copper is below the weak threshold (0.2 %) on the iocg deposit band.
  • Scored from rubric bands during table expansion, not from document context.

Evidence · table

“0.01”

Context: WND26_001

Tags used in scoring

QA/QC Disclosedpositive

Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).

Why it applies: qaqc_disclosed is true

Cut-off Undisclosednegative

High-grade interval reported without stating the cut-off grade used for compositing.

Why it applies: no cutoff_grade was stated

WND26_001Cloncurry · goldGrade: 0.02Grade Unit: g/tIntercept: 1 mView all details
Link to this fact

Identity

Hole ID
WND26_001
Project
Cloncurry
Commodity
gold
Region
australia_qld
Reported Region
australia_qld
Ticker
TNC

Geometry

Grade
0.02
Grade Unit
g/t
Intercept
1 m
From
146 m
To
147 m
Intercept Depth
146 m

Classification

Deposit Type
iocg
Sample Type
drill
Group ID
WND26_001:146-147
Mining Method
open_pit

Location

Location
Main Zone
CRS
MGA94 Zone 54
Loc. Source
document

QA/QC

Laboratory
ALS Brisbane
QA/QC Disclosed
Yes
QP Signed
Yes
QA/QC Methods
standards, blanks, duplicates

Metal Equivalent

Metal Eq. Grade
0.03
Metal Eq. Unit
% Cu-Eq
Assumptions Disclosed
Yes

Compositing

Dilution Disclosed
Yes

Review

Needs Review
No
Interp. Status
scored
Historical
No

Dates

Event date
2026-09-29T00:00:00.000Z

Reasoning: Expanded from assay table. 0.02 g/t gold is below against the open_pit mining band [5, 2, 1, 0.3] g/t. Grade×width 0.0 g/t·m is below.

Negative factors

  • 0.02 g/t gold is below the weak threshold (0.3 g/t) on the open_pit mining band.
  • Scored from rubric bands during table expansion, not from document context.

Evidence · table

“0.02”

Context: WND26_001

Tags used in scoring

QA/QC Disclosedpositive

Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).

Why it applies: qaqc_disclosed is true

Cut-off Undisclosednegative

High-grade interval reported without stating the cut-off grade used for compositing.

Why it applies: no cutoff_grade was stated

WND26_001Cloncurry · copperGrade: 0.01Grade Unit: %Intercept: 1 mView all details
Link to this fact

Identity

Hole ID
WND26_001
Project
Cloncurry
Commodity
copper
Region
australia_qld
Reported Region
australia_qld
Ticker
TNC

Geometry

Grade
0.01
Grade Unit
%
Intercept
1 m
From
147 m
To
148 m
Intercept Depth
147 m

Classification

Deposit Type
iocg
Sample Type
drill
Group ID
WND26_001:147-148
Mining Method
open_pit

Location

Location
Main Zone
CRS
MGA94 Zone 54
Loc. Source
document

QA/QC

Laboratory
ALS Brisbane
QA/QC Disclosed
Yes
QP Signed
Yes
QA/QC Methods
standards, blanks, duplicates

Metal Equivalent

Metal Eq. Grade
0.04
Metal Eq. Unit
% Cu-Eq
Assumptions Disclosed
Yes

Compositing

Dilution Disclosed
Yes

Review

Needs Review
No
Interp. Status
scored
Historical
No

Dates

Event date
2026-09-29T00:00:00.000Z

Reasoning: Expanded from assay table. 0.01 % copper is below against the iocg deposit band [0.9, 0.5, 0.3, 0.2] %. Grade×width 0.0 %·m is below.

Negative factors

  • 0.01 % copper is below the weak threshold (0.2 %) on the iocg deposit band.
  • Scored from rubric bands during table expansion, not from document context.

Evidence · table

“0.01”

Context: WND26_001

Tags used in scoring

QA/QC Disclosedpositive

Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).

Why it applies: qaqc_disclosed is true

Cut-off Undisclosednegative

High-grade interval reported without stating the cut-off grade used for compositing.

Why it applies: no cutoff_grade was stated

WND26_001Cloncurry · goldGrade: 0.03Grade Unit: g/tIntercept: 1 mView all details
Link to this fact

Identity

Hole ID
WND26_001
Project
Cloncurry
Commodity
gold
Region
australia_qld
Reported Region
australia_qld
Ticker
TNC

Geometry

Grade
0.03
Grade Unit
g/t
Intercept
1 m
From
147 m
To
148 m
Intercept Depth
147 m

Classification

Deposit Type
iocg
Sample Type
drill
Group ID
WND26_001:147-148
Mining Method
open_pit

Location

Location
Main Zone
CRS
MGA94 Zone 54
Loc. Source
document

QA/QC

Laboratory
ALS Brisbane
QA/QC Disclosed
Yes
QP Signed
Yes
QA/QC Methods
standards, blanks, duplicates

Metal Equivalent

Metal Eq. Grade
0.04
Metal Eq. Unit
% Cu-Eq
Assumptions Disclosed
Yes

Compositing

Dilution Disclosed
Yes

Review

Needs Review
No
Interp. Status
scored
Historical
No

Dates

Event date
2026-09-29T00:00:00.000Z

Reasoning: Expanded from assay table. 0.03 g/t gold is below against the open_pit mining band [5, 2, 1, 0.3] g/t. Grade×width 0.0 g/t·m is below.

Negative factors

  • 0.03 g/t gold is below the weak threshold (0.3 g/t) on the open_pit mining band.
  • Scored from rubric bands during table expansion, not from document context.

Evidence · table

“0.03”

Context: WND26_001

Tags used in scoring

QA/QC Disclosedpositive

Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).

Why it applies: qaqc_disclosed is true

Cut-off Undisclosednegative

High-grade interval reported without stating the cut-off grade used for compositing.

Why it applies: no cutoff_grade was stated

WND26_001Cloncurry · copperGrade: 0.02Grade Unit: %Intercept: 1 mView all details
Link to this fact

Identity

Hole ID
WND26_001
Project
Cloncurry
Commodity
copper
Region
australia_qld
Reported Region
australia_qld
Ticker
TNC

Geometry

Grade
0.02
Grade Unit
%
Intercept
1 m
From
148 m
To
149 m
Intercept Depth
148 m

Classification

Deposit Type
iocg
Sample Type
drill
Group ID
WND26_001:148-149
Mining Method
open_pit

Location

Location
Main Zone
CRS
MGA94 Zone 54
Loc. Source
document

QA/QC

Laboratory
ALS Brisbane
QA/QC Disclosed
Yes
QP Signed
Yes
QA/QC Methods
standards, blanks, duplicates

Metal Equivalent

Metal Eq. Grade
0.04
Metal Eq. Unit
% Cu-Eq
Assumptions Disclosed
Yes

Compositing

Dilution Disclosed
Yes

Review

Needs Review
No
Interp. Status
scored
Historical
No

Dates

Event date
2026-09-29T00:00:00.000Z

Reasoning: Expanded from assay table. 0.02 % copper is below against the iocg deposit band [0.9, 0.5, 0.3, 0.2] %. Grade×width 0.0 %·m is below.

Negative factors

  • 0.02 % copper is below the weak threshold (0.2 %) on the iocg deposit band.
  • Scored from rubric bands during table expansion, not from document context.

Evidence · table

“0.02”

Context: WND26_001

Tags used in scoring

QA/QC Disclosedpositive

Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).

Why it applies: qaqc_disclosed is true

Cut-off Undisclosednegative

High-grade interval reported without stating the cut-off grade used for compositing.

Why it applies: no cutoff_grade was stated

WND26_001Cloncurry · goldGrade: 0.02Grade Unit: g/tIntercept: 1 mView all details
Link to this fact

Identity

Hole ID
WND26_001
Project
Cloncurry
Commodity
gold
Region
australia_qld
Reported Region
australia_qld
Ticker
TNC

Geometry

Grade
0.02
Grade Unit
g/t
Intercept
1 m
From
148 m
To
149 m
Intercept Depth
148 m

Classification

Deposit Type
iocg
Sample Type
drill
Group ID
WND26_001:148-149
Mining Method
open_pit

Location

Location
Main Zone
CRS
MGA94 Zone 54
Loc. Source
document

QA/QC

Laboratory
ALS Brisbane
QA/QC Disclosed
Yes
QP Signed
Yes
QA/QC Methods
standards, blanks, duplicates

Metal Equivalent

Metal Eq. Grade
0.04
Metal Eq. Unit
% Cu-Eq
Assumptions Disclosed
Yes

Compositing

Dilution Disclosed
Yes

Review

Needs Review
No
Interp. Status
scored
Historical
No

Dates

Event date
2026-09-29T00:00:00.000Z

Reasoning: Expanded from assay table. 0.02 g/t gold is below against the open_pit mining band [5, 2, 1, 0.3] g/t. Grade×width 0.0 g/t·m is below.

Negative factors

  • 0.02 g/t gold is below the weak threshold (0.3 g/t) on the open_pit mining band.
  • Scored from rubric bands during table expansion, not from document context.

Evidence · table

“0.02”

Context: WND26_001

Tags used in scoring

QA/QC Disclosedpositive

Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).

Why it applies: qaqc_disclosed is true

Cut-off Undisclosednegative

High-grade interval reported without stating the cut-off grade used for compositing.

Why it applies: no cutoff_grade was stated

WND26_001Cloncurry · copperGrade: 0.2Grade Unit: %Intercept: 1 mView all details
Link to this fact

Identity

Hole ID
WND26_001
Project
Cloncurry
Commodity
copper
Region
australia_qld
Reported Region
australia_qld
Ticker
TNC

Geometry

Grade
0.2
Grade Unit
%
Intercept
1 m
From
149 m
To
150 m
Intercept Depth
149 m

Classification

Deposit Type
iocg
Sample Type
drill
Group ID
WND26_001:149-150
Mining Method
open_pit

Location

Location
Main Zone
CRS
MGA94 Zone 54
Loc. Source
document

QA/QC

Laboratory
ALS Brisbane
QA/QC Disclosed
Yes
QP Signed
Yes
QA/QC Methods
standards, blanks, duplicates

Metal Equivalent

Metal Eq. Grade
0.26
Metal Eq. Unit
% Cu-Eq
Assumptions Disclosed
Yes

Compositing

Dilution Disclosed
Yes

Review

Needs Review
No
Interp. Status
scored
Historical
No

Dates

Event date
2026-09-29T00:00:00.000Z

Reasoning: Expanded from assay table. 0.2 % copper is weak against the iocg deposit band [0.9, 0.5, 0.3, 0.2] %. Grade×width 0.2 %·m is below (grade alone is weak; the better of the two is used).

Negative factors

  • Scored from rubric bands during table expansion, not from document context.

Evidence · table

“0.20”

Context: WND26_001

Tags used in scoring

QA/QC Disclosedpositive

Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).

Why it applies: qaqc_disclosed is true

Cut-off Undisclosednegative

High-grade interval reported without stating the cut-off grade used for compositing.

Why it applies: no cutoff_grade was stated

WND26_001Cloncurry · goldGrade: 0.06Grade Unit: g/tIntercept: 1 mView all details
Link to this fact

Identity

Hole ID
WND26_001
Project
Cloncurry
Commodity
gold
Region
australia_qld
Reported Region
australia_qld
Ticker
TNC

Geometry

Grade
0.06
Grade Unit
g/t
Intercept
1 m
From
149 m
To
150 m
Intercept Depth
149 m

Classification

Deposit Type
iocg
Sample Type
drill
Group ID
WND26_001:149-150
Mining Method
open_pit

Location

Location
Main Zone
CRS
MGA94 Zone 54
Loc. Source
document

QA/QC

Laboratory
ALS Brisbane
QA/QC Disclosed
Yes
QP Signed
Yes
QA/QC Methods
standards, blanks, duplicates

Metal Equivalent

Metal Eq. Grade
0.26
Metal Eq. Unit
% Cu-Eq
Assumptions Disclosed
Yes

Compositing

Dilution Disclosed
Yes

Review

Needs Review
No
Interp. Status
scored
Historical
No

Dates

Event date
2026-09-29T00:00:00.000Z

Reasoning: Expanded from assay table. 0.06 g/t gold is below against the open_pit mining band [5, 2, 1, 0.3] g/t. Grade×width 0.1 g/t·m is below.

Negative factors

  • 0.06 g/t gold is below the weak threshold (0.3 g/t) on the open_pit mining band.
  • Scored from rubric bands during table expansion, not from document context.

Evidence · table

“0.06”

Context: WND26_001

Tags used in scoring

QA/QC Disclosedpositive

Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).

Why it applies: qaqc_disclosed is true

Cut-off Undisclosednegative

High-grade interval reported without stating the cut-off grade used for compositing.

Why it applies: no cutoff_grade was stated

WND26_001Cloncurry · copperGrade: 0.19Grade Unit: %Intercept: 1 mView all details
Link to this fact

Identity

Hole ID
WND26_001
Project
Cloncurry
Commodity
copper
Region
australia_qld
Reported Region
australia_qld
Ticker
TNC

Geometry

Grade
0.19
Grade Unit
%
Intercept
1 m
From
150 m
To
151 m
Intercept Depth
150 m

Classification

Deposit Type
iocg
Sample Type
drill
Group ID
WND26_001:150-151
Mining Method
open_pit

Location

Location
Main Zone
CRS
MGA94 Zone 54
Loc. Source
document

QA/QC

Laboratory
ALS Brisbane
QA/QC Disclosed
Yes
QP Signed
Yes
QA/QC Methods
standards, blanks, duplicates

Metal Equivalent

Metal Eq. Grade
0.24
Metal Eq. Unit
% Cu-Eq
Assumptions Disclosed
Yes

Compositing

Dilution Disclosed
Yes

Review

Needs Review
No
Interp. Status
scored
Historical
No

Dates

Event date
2026-09-29T00:00:00.000Z

Reasoning: Expanded from assay table. 0.19 % copper is below against the iocg deposit band [0.9, 0.5, 0.3, 0.2] %. Grade×width 0.2 %·m is below.

Negative factors

  • 0.19 % copper is below the weak threshold (0.2 %) on the iocg deposit band.
  • Scored from rubric bands during table expansion, not from document context.

Evidence · table

“0.19”

Context: WND26_001

Tags used in scoring

QA/QC Disclosedpositive

Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).

Why it applies: qaqc_disclosed is true

Cut-off Undisclosednegative

High-grade interval reported without stating the cut-off grade used for compositing.

Why it applies: no cutoff_grade was stated

WND26_001Cloncurry · goldGrade: 0.05Grade Unit: g/tIntercept: 1 mView all details
Link to this fact

Identity

Hole ID
WND26_001
Project
Cloncurry
Commodity
gold
Region
australia_qld
Reported Region
australia_qld
Ticker
TNC

Geometry

Grade
0.05
Grade Unit
g/t
Intercept
1 m
From
150 m
To
151 m
Intercept Depth
150 m

Classification

Deposit Type
iocg
Sample Type
drill
Group ID
WND26_001:150-151
Mining Method
open_pit

Location

Location
Main Zone
CRS
MGA94 Zone 54
Loc. Source
document

QA/QC

Laboratory
ALS Brisbane
QA/QC Disclosed
Yes
QP Signed
Yes
QA/QC Methods
standards, blanks, duplicates

Metal Equivalent

Metal Eq. Grade
0.24
Metal Eq. Unit
% Cu-Eq
Assumptions Disclosed
Yes

Compositing

Dilution Disclosed
Yes

Review

Needs Review
No
Interp. Status
scored
Historical
No

Dates

Event date
2026-09-29T00:00:00.000Z

Reasoning: Expanded from assay table. 0.05 g/t gold is below against the open_pit mining band [5, 2, 1, 0.3] g/t. Grade×width 0.1 g/t·m is below.

Negative factors

  • 0.05 g/t gold is below the weak threshold (0.3 g/t) on the open_pit mining band.
  • Scored from rubric bands during table expansion, not from document context.

Evidence · table

“0.05”

Context: WND26_001

Tags used in scoring

QA/QC Disclosedpositive

Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).

Why it applies: qaqc_disclosed is true

Cut-off Undisclosednegative

High-grade interval reported without stating the cut-off grade used for compositing.

Why it applies: no cutoff_grade was stated

WND26_001Cloncurry · copperGrade: 0.38Grade Unit: %Intercept: 1 mView all details
Link to this fact

Identity

Hole ID
WND26_001
Project
Cloncurry
Commodity
copper
Region
australia_qld
Reported Region
australia_qld
Ticker
TNC

Geometry

Grade
0.38
Grade Unit
%
Intercept
1 m
From
151 m
To
152 m
Intercept Depth
151 m

Classification

Deposit Type
iocg
Sample Type
drill
Group ID
WND26_001:151-152
Mining Method
open_pit

Location

Location
Main Zone
CRS
MGA94 Zone 54
Loc. Source
document

QA/QC

Laboratory
ALS Brisbane
QA/QC Disclosed
Yes
QP Signed
Yes
QA/QC Methods
standards, blanks, duplicates

Metal Equivalent

Metal Eq. Grade
0.43
Metal Eq. Unit
% Cu-Eq
Assumptions Disclosed
Yes

Compositing

Dilution Disclosed
Yes

Review

Needs Review
No
Interp. Status
scored
Historical
No

Dates

Event date
2026-09-29T00:00:00.000Z

Reasoning: Expanded from assay table. 0.38 % copper is moderate against the iocg deposit band [0.9, 0.5, 0.3, 0.2] %. Grade×width 0.4 %·m is below (grade alone is moderate; the better of the two is used).

Negative factors

  • Scored from rubric bands during table expansion, not from document context.

Evidence · table

“0.38”

Context: WND26_001

Tags used in scoring

QA/QC Disclosedpositive

Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).

Why it applies: qaqc_disclosed is true

Cut-off Undisclosednegative

High-grade interval reported without stating the cut-off grade used for compositing.

Why it applies: no cutoff_grade was stated

WND26_001Cloncurry · goldGrade: 0.05Grade Unit: g/tIntercept: 1 mView all details
Link to this fact

Identity

Hole ID
WND26_001
Project
Cloncurry
Commodity
gold
Region
australia_qld
Reported Region
australia_qld
Ticker
TNC

Geometry

Grade
0.05
Grade Unit
g/t
Intercept
1 m
From
151 m
To
152 m
Intercept Depth
151 m

Classification

Deposit Type
iocg
Sample Type
drill
Group ID
WND26_001:151-152
Mining Method
open_pit

Location

Location
Main Zone
CRS
MGA94 Zone 54
Loc. Source
document

QA/QC

Laboratory
ALS Brisbane
QA/QC Disclosed
Yes
QP Signed
Yes
QA/QC Methods
standards, blanks, duplicates

Metal Equivalent

Metal Eq. Grade
0.43
Metal Eq. Unit
% Cu-Eq
Assumptions Disclosed
Yes

Compositing

Dilution Disclosed
Yes

Review

Needs Review
No
Interp. Status
scored
Historical
No

Dates

Event date
2026-09-29T00:00:00.000Z

Reasoning: Expanded from assay table. 0.05 g/t gold is below against the open_pit mining band [5, 2, 1, 0.3] g/t. Grade×width 0.1 g/t·m is below.

Negative factors

  • 0.05 g/t gold is below the weak threshold (0.3 g/t) on the open_pit mining band.
  • Scored from rubric bands during table expansion, not from document context.

Evidence · table

“0.05”

Context: WND26_001

Tags used in scoring

QA/QC Disclosedpositive

Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).

Why it applies: qaqc_disclosed is true

Cut-off Undisclosednegative

High-grade interval reported without stating the cut-off grade used for compositing.

Why it applies: no cutoff_grade was stated

WND26_001Cloncurry · copperGrade: 0.11Grade Unit: %Intercept: 1 mView all details
Link to this fact

Identity

Hole ID
WND26_001
Project
Cloncurry
Commodity
copper
Region
australia_qld
Reported Region
australia_qld
Ticker
TNC

Geometry

Grade
0.11
Grade Unit
%
Intercept
1 m
From
152 m
To
153 m
Intercept Depth
152 m

Classification

Deposit Type
iocg
Sample Type
drill
Group ID
WND26_001:152-153
Mining Method
open_pit

Location

Location
Main Zone
CRS
MGA94 Zone 54
Loc. Source
document

QA/QC

Laboratory
ALS Brisbane
QA/QC Disclosed
Yes
QP Signed
Yes
QA/QC Methods
standards, blanks, duplicates

Metal Equivalent

Metal Eq. Grade
0.12
Metal Eq. Unit
% Cu-Eq
Assumptions Disclosed
Yes

Compositing

Dilution Disclosed
Yes

Review

Needs Review
No
Interp. Status
scored
Historical
No

Dates

Event date
2026-09-29T00:00:00.000Z

Reasoning: Expanded from assay table. 0.11 % copper is below against the iocg deposit band [0.9, 0.5, 0.3, 0.2] %. Grade×width 0.1 %·m is below.

Negative factors

  • 0.11 % copper is below the weak threshold (0.2 %) on the iocg deposit band.
  • Scored from rubric bands during table expansion, not from document context.

Evidence · table

“0.11”

Context: WND26_001

Tags used in scoring

QA/QC Disclosedpositive

Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).

Why it applies: qaqc_disclosed is true

Cut-off Undisclosednegative

High-grade interval reported without stating the cut-off grade used for compositing.

Why it applies: no cutoff_grade was stated

WND26_001Cloncurry · goldGrade: 0.01Grade Unit: g/tIntercept: 1 mView all details
Link to this fact

Identity

Hole ID
WND26_001
Project
Cloncurry
Commodity
gold
Region
australia_qld
Reported Region
australia_qld
Ticker
TNC

Geometry

Grade
0.01
Grade Unit
g/t
Intercept
1 m
From
152 m
To
153 m
Intercept Depth
152 m

Classification

Deposit Type
iocg
Sample Type
drill
Group ID
WND26_001:152-153
Mining Method
open_pit

Location

Location
Main Zone
CRS
MGA94 Zone 54
Loc. Source
document

QA/QC

Laboratory
ALS Brisbane
QA/QC Disclosed
Yes
QP Signed
Yes
QA/QC Methods
standards, blanks, duplicates

Metal Equivalent

Metal Eq. Grade
0.12
Metal Eq. Unit
% Cu-Eq
Assumptions Disclosed
Yes

Compositing

Dilution Disclosed
Yes

Review

Needs Review
No
Interp. Status
scored
Historical
No

Dates

Event date
2026-09-29T00:00:00.000Z

Reasoning: Expanded from assay table. 0.01 g/t gold is below against the open_pit mining band [5, 2, 1, 0.3] g/t. Grade×width 0.0 g/t·m is below.

Negative factors

  • 0.01 g/t gold is below the weak threshold (0.3 g/t) on the open_pit mining band.
  • Scored from rubric bands during table expansion, not from document context.

Evidence · table

“0.01”

Context: WND26_001

Tags used in scoring

QA/QC Disclosedpositive

Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).

Why it applies: qaqc_disclosed is true

Cut-off Undisclosednegative

High-grade interval reported without stating the cut-off grade used for compositing.

Why it applies: no cutoff_grade was stated

WND26_001Cloncurry · copperGrade: 0.02Grade Unit: %Intercept: 1 mView all details
Link to this fact

Identity

Hole ID
WND26_001
Project
Cloncurry
Commodity
copper
Region
australia_qld
Reported Region
australia_qld
Ticker
TNC

Geometry

Grade
0.02
Grade Unit
%
Intercept
1 m
From
153 m
To
154 m
Intercept Depth
153 m

Classification

Deposit Type
iocg
Sample Type
drill
Group ID
WND26_001:153-154
Mining Method
open_pit

Location

Location
Main Zone
CRS
MGA94 Zone 54
Loc. Source
document

QA/QC

Laboratory
ALS Brisbane
QA/QC Disclosed
Yes
QP Signed
Yes
QA/QC Methods
standards, blanks, duplicates

Metal Equivalent

Metal Eq. Grade
0.03
Metal Eq. Unit
% Cu-Eq
Assumptions Disclosed
Yes

Compositing

Dilution Disclosed
Yes

Review

Needs Review
No
Interp. Status
scored
Historical
No

Dates

Event date
2026-09-29T00:00:00.000Z

Reasoning: Expanded from assay table. 0.02 % copper is below against the iocg deposit band [0.9, 0.5, 0.3, 0.2] %. Grade×width 0.0 %·m is below.

Negative factors

  • 0.02 % copper is below the weak threshold (0.2 %) on the iocg deposit band.
  • Scored from rubric bands during table expansion, not from document context.

Evidence · table

“0.02”

Context: WND26_001

Tags used in scoring

QA/QC Disclosedpositive

Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).

Why it applies: qaqc_disclosed is true

Cut-off Undisclosednegative

High-grade interval reported without stating the cut-off grade used for compositing.

Why it applies: no cutoff_grade was stated

WND26_001Cloncurry · goldGrade: 0.01Grade Unit: g/tIntercept: 1 mView all details
Link to this fact

Identity

Hole ID
WND26_001
Project
Cloncurry
Commodity
gold
Region
australia_qld
Reported Region
australia_qld
Ticker
TNC

Geometry

Grade
0.01
Grade Unit
g/t
Intercept
1 m
From
153 m
To
154 m
Intercept Depth
153 m

Classification

Deposit Type
iocg
Sample Type
drill
Group ID
WND26_001:153-154
Mining Method
open_pit

Location

Location
Main Zone
CRS
MGA94 Zone 54
Loc. Source
document

QA/QC

Laboratory
ALS Brisbane
QA/QC Disclosed
Yes
QP Signed
Yes
QA/QC Methods
standards, blanks, duplicates

Metal Equivalent

Metal Eq. Grade
0.03
Metal Eq. Unit
% Cu-Eq
Assumptions Disclosed
Yes

Compositing

Dilution Disclosed
Yes

Review

Needs Review
No
Interp. Status
scored
Historical
No

Dates

Event date
2026-09-29T00:00:00.000Z

Reasoning: Expanded from assay table. 0.01 g/t gold is below against the open_pit mining band [5, 2, 1, 0.3] g/t. Grade×width 0.0 g/t·m is below.

Negative factors

  • 0.01 g/t gold is below the weak threshold (0.3 g/t) on the open_pit mining band.
  • Scored from rubric bands during table expansion, not from document context.

Evidence · table

“0.01”

Context: WND26_001

Tags used in scoring

QA/QC Disclosedpositive

Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).

Why it applies: qaqc_disclosed is true

Cut-off Undisclosednegative

High-grade interval reported without stating the cut-off grade used for compositing.

Why it applies: no cutoff_grade was stated

WND26_001Cloncurry · copperGrade: 0.07Grade Unit: %Intercept: 1 mView all details
Link to this fact

Identity

Hole ID
WND26_001
Project
Cloncurry
Commodity
copper
Region
australia_qld
Reported Region
australia_qld
Ticker
TNC

Geometry

Grade
0.07
Grade Unit
%
Intercept
1 m
From
154 m
To
155 m
Intercept Depth
154 m

Classification

Deposit Type
iocg
Sample Type
drill
Group ID
WND26_001:154-155
Mining Method
open_pit

Location

Location
Main Zone
CRS
MGA94 Zone 54
Loc. Source
document

QA/QC

Laboratory
ALS Brisbane
QA/QC Disclosed
Yes
QP Signed
Yes
QA/QC Methods
standards, blanks, duplicates

Metal Equivalent

Metal Eq. Grade
0.09
Metal Eq. Unit
% Cu-Eq
Assumptions Disclosed
Yes

Compositing

Dilution Disclosed
Yes

Review

Needs Review
No
Interp. Status
scored
Historical
No

Dates

Event date
2026-09-29T00:00:00.000Z

Reasoning: Expanded from assay table. 0.07 % copper is below against the iocg deposit band [0.9, 0.5, 0.3, 0.2] %. Grade×width 0.1 %·m is below.

Negative factors

  • 0.07 % copper is below the weak threshold (0.2 %) on the iocg deposit band.
  • Scored from rubric bands during table expansion, not from document context.

Evidence · table

“0.07”

Context: WND26_001

Tags used in scoring

QA/QC Disclosedpositive

Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).

Why it applies: qaqc_disclosed is true

Cut-off Undisclosednegative

High-grade interval reported without stating the cut-off grade used for compositing.

Why it applies: no cutoff_grade was stated

WND26_001Cloncurry · goldGrade: 0.02Grade Unit: g/tIntercept: 1 mView all details
Link to this fact

Identity

Hole ID
WND26_001
Project
Cloncurry
Commodity
gold
Region
australia_qld
Reported Region
australia_qld
Ticker
TNC

Geometry

Grade
0.02
Grade Unit
g/t
Intercept
1 m
From
154 m
To
155 m
Intercept Depth
154 m

Classification

Deposit Type
iocg
Sample Type
drill
Group ID
WND26_001:154-155
Mining Method
open_pit

Location

Location
Main Zone
CRS
MGA94 Zone 54
Loc. Source
document

QA/QC

Laboratory
ALS Brisbane
QA/QC Disclosed
Yes
QP Signed
Yes
QA/QC Methods
standards, blanks, duplicates

Metal Equivalent

Metal Eq. Grade
0.09
Metal Eq. Unit
% Cu-Eq
Assumptions Disclosed
Yes

Compositing

Dilution Disclosed
Yes

Review

Needs Review
No
Interp. Status
scored
Historical
No

Dates

Event date
2026-09-29T00:00:00.000Z

Reasoning: Expanded from assay table. 0.02 g/t gold is below against the open_pit mining band [5, 2, 1, 0.3] g/t. Grade×width 0.0 g/t·m is below.

Negative factors

  • 0.02 g/t gold is below the weak threshold (0.3 g/t) on the open_pit mining band.
  • Scored from rubric bands during table expansion, not from document context.

Evidence · table

“0.02”

Context: WND26_001

Tags used in scoring

QA/QC Disclosedpositive

Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).

Why it applies: qaqc_disclosed is true

Cut-off Undisclosednegative

High-grade interval reported without stating the cut-off grade used for compositing.

Why it applies: no cutoff_grade was stated

WND26_001Cloncurry · copperGrade: 0.25Grade Unit: %Intercept: 1 mView all details
Link to this fact

Identity

Hole ID
WND26_001
Project
Cloncurry
Commodity
copper
Region
australia_qld
Reported Region
australia_qld
Ticker
TNC

Geometry

Grade
0.25
Grade Unit
%
Intercept
1 m
From
155 m
To
156 m
Intercept Depth
155 m

Classification

Deposit Type
iocg
Sample Type
drill
Group ID
WND26_001:155-156
Mining Method
open_pit

Location

Location
Main Zone
CRS
MGA94 Zone 54
Loc. Source
document

QA/QC

Laboratory
ALS Brisbane
QA/QC Disclosed
Yes
QP Signed
Yes
QA/QC Methods
standards, blanks, duplicates

Metal Equivalent

Metal Eq. Grade
0.87
Metal Eq. Unit
% Cu-Eq
Assumptions Disclosed
Yes

Compositing

Dilution Disclosed
Yes

Review

Needs Review
No
Interp. Status
scored
Historical
No

Dates

Event date
2026-09-29T00:00:00.000Z

Reasoning: Expanded from assay table. 0.25 % copper is weak against the iocg deposit band [0.9, 0.5, 0.3, 0.2] %. Grade×width 0.3 %·m is below (grade alone is weak; the better of the two is used).

Negative factors

  • Scored from rubric bands during table expansion, not from document context.

Evidence · table

“0.25”

Context: WND26_001

Tags used in scoring

QA/QC Disclosedpositive

Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).

Why it applies: qaqc_disclosed is true

Cut-off Undisclosednegative

High-grade interval reported without stating the cut-off grade used for compositing.

Why it applies: no cutoff_grade was stated

WND26_001Cloncurry · goldGrade: 0.61Grade Unit: g/tIntercept: 1 mView all details
Link to this fact

Identity

Hole ID
WND26_001
Project
Cloncurry
Commodity
gold
Region
australia_qld
Reported Region
australia_qld
Ticker
TNC

Geometry

Grade
0.61
Grade Unit
g/t
Intercept
1 m
From
155 m
To
156 m
Intercept Depth
155 m

Classification

Deposit Type
iocg
Sample Type
drill
Group ID
WND26_001:155-156
Mining Method
open_pit

Location

Location
Main Zone
CRS
MGA94 Zone 54
Loc. Source
document

QA/QC

Laboratory
ALS Brisbane
QA/QC Disclosed
Yes
QP Signed
Yes
QA/QC Methods
standards, blanks, duplicates

Metal Equivalent

Metal Eq. Grade
0.87
Metal Eq. Unit
% Cu-Eq
Assumptions Disclosed
Yes

Compositing

Dilution Disclosed
Yes

Review

Needs Review
No
Interp. Status
scored
Historical
No

Dates

Event date
2026-09-29T00:00:00.000Z

Reasoning: Expanded from assay table. 0.61 g/t gold is weak against the open_pit mining band [5, 2, 1, 0.3] g/t. Grade×width 0.6 g/t·m is below (grade alone is weak; the better of the two is used).

Negative factors

  • Scored from rubric bands during table expansion, not from document context.

Evidence · table

“0.61”

Context: WND26_001

Tags used in scoring

QA/QC Disclosedpositive

Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).

Why it applies: qaqc_disclosed is true

Cut-off Undisclosednegative

High-grade interval reported without stating the cut-off grade used for compositing.

Why it applies: no cutoff_grade was stated

WND26_001Cloncurry · copperGrade: 0.13Grade Unit: %Intercept: 1 mView all details
Link to this fact

Identity

Hole ID
WND26_001
Project
Cloncurry
Commodity
copper
Region
australia_qld
Reported Region
australia_qld
Ticker
TNC

Geometry

Grade
0.13
Grade Unit
%
Intercept
1 m
From
156 m
To
157 m
Intercept Depth
156 m

Classification

Deposit Type
iocg
Sample Type
drill
Group ID
WND26_001:156-157
Mining Method
open_pit

Location

Location
Main Zone
CRS
MGA94 Zone 54
Loc. Source
document

QA/QC

Laboratory
ALS Brisbane
QA/QC Disclosed
Yes
QP Signed
Yes
QA/QC Methods
standards, blanks, duplicates

Metal Equivalent

Metal Eq. Grade
0.46
Metal Eq. Unit
% Cu-Eq
Assumptions Disclosed
Yes

Compositing

Dilution Disclosed
Yes

Review

Needs Review
No
Interp. Status
scored
Historical
No

Dates

Event date
2026-09-29T00:00:00.000Z

Reasoning: Expanded from assay table. 0.13 % copper is below against the iocg deposit band [0.9, 0.5, 0.3, 0.2] %. Grade×width 0.1 %·m is below.

Negative factors

  • 0.13 % copper is below the weak threshold (0.2 %) on the iocg deposit band.
  • Scored from rubric bands during table expansion, not from document context.

Evidence · table

“0.13”

Context: WND26_001

Tags used in scoring

QA/QC Disclosedpositive

Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).

Why it applies: qaqc_disclosed is true

Cut-off Undisclosednegative

High-grade interval reported without stating the cut-off grade used for compositing.

Why it applies: no cutoff_grade was stated

WND26_001Cloncurry · goldGrade: 0.33Grade Unit: g/tIntercept: 1 mView all details
Link to this fact

Identity

Hole ID
WND26_001
Project
Cloncurry
Commodity
gold
Region
australia_qld
Reported Region
australia_qld
Ticker
TNC

Geometry

Grade
0.33
Grade Unit
g/t
Intercept
1 m
From
156 m
To
157 m
Intercept Depth
156 m

Classification

Deposit Type
iocg
Sample Type
drill
Group ID
WND26_001:156-157
Mining Method
open_pit

Location

Location
Main Zone
CRS
MGA94 Zone 54
Loc. Source
document

QA/QC

Laboratory
ALS Brisbane
QA/QC Disclosed
Yes
QP Signed
Yes
QA/QC Methods
standards, blanks, duplicates

Metal Equivalent

Metal Eq. Grade
0.46
Metal Eq. Unit
% Cu-Eq
Assumptions Disclosed
Yes

Compositing

Dilution Disclosed
Yes

Review

Needs Review
No
Interp. Status
scored
Historical
No

Dates

Event date
2026-09-29T00:00:00.000Z

Reasoning: Expanded from assay table. 0.33 g/t gold is weak against the open_pit mining band [5, 2, 1, 0.3] g/t. Grade×width 0.3 g/t·m is below (grade alone is weak; the better of the two is used).

Negative factors

  • Scored from rubric bands during table expansion, not from document context.

Evidence · table

“0.33”

Context: WND26_001

Tags used in scoring

QA/QC Disclosedpositive

Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).

Why it applies: qaqc_disclosed is true

Cut-off Undisclosednegative

High-grade interval reported without stating the cut-off grade used for compositing.

Why it applies: no cutoff_grade was stated

WND26_001Cloncurry · copperGrade: 0.2Grade Unit: %Intercept: 1 mView all details
Link to this fact

Identity

Hole ID
WND26_001
Project
Cloncurry
Commodity
copper
Region
australia_qld
Reported Region
australia_qld
Ticker
TNC

Geometry

Grade
0.2
Grade Unit
%
Intercept
1 m
From
157 m
To
158 m
Intercept Depth
157 m

Classification

Deposit Type
iocg
Sample Type
drill
Group ID
WND26_001:157-158
Mining Method
open_pit

Location

Location
Main Zone
CRS
MGA94 Zone 54
Loc. Source
document

QA/QC

Laboratory
ALS Brisbane
QA/QC Disclosed
Yes
QP Signed
Yes
QA/QC Methods
standards, blanks, duplicates

Metal Equivalent

Metal Eq. Grade
0.23
Metal Eq. Unit
% Cu-Eq
Assumptions Disclosed
Yes

Compositing

Dilution Disclosed
Yes

Review

Needs Review
No
Interp. Status
scored
Historical
No

Dates

Event date
2026-09-29T00:00:00.000Z

Reasoning: Expanded from assay table. 0.2 % copper is weak against the iocg deposit band [0.9, 0.5, 0.3, 0.2] %. Grade×width 0.2 %·m is below (grade alone is weak; the better of the two is used).

Negative factors

  • Scored from rubric bands during table expansion, not from document context.

Evidence · table

“0.20”

Context: WND26_001

Tags used in scoring

QA/QC Disclosedpositive

Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).

Why it applies: qaqc_disclosed is true

Cut-off Undisclosednegative

High-grade interval reported without stating the cut-off grade used for compositing.

Why it applies: no cutoff_grade was stated

WND26_001Cloncurry · goldGrade: 0.03Grade Unit: g/tIntercept: 1 mView all details
Link to this fact

Identity

Hole ID
WND26_001
Project
Cloncurry
Commodity
gold
Region
australia_qld
Reported Region
australia_qld
Ticker
TNC

Geometry

Grade
0.03
Grade Unit
g/t
Intercept
1 m
From
157 m
To
158 m
Intercept Depth
157 m

Classification

Deposit Type
iocg
Sample Type
drill
Group ID
WND26_001:157-158
Mining Method
open_pit

Location

Location
Main Zone
CRS
MGA94 Zone 54
Loc. Source
document

QA/QC

Laboratory
ALS Brisbane
QA/QC Disclosed
Yes
QP Signed
Yes
QA/QC Methods
standards, blanks, duplicates

Metal Equivalent

Metal Eq. Grade
0.23
Metal Eq. Unit
% Cu-Eq
Assumptions Disclosed
Yes

Compositing

Dilution Disclosed
Yes

Review

Needs Review
No
Interp. Status
scored
Historical
No

Dates

Event date
2026-09-29T00:00:00.000Z

Reasoning: Expanded from assay table. 0.03 g/t gold is below against the open_pit mining band [5, 2, 1, 0.3] g/t. Grade×width 0.0 g/t·m is below.

Negative factors

  • 0.03 g/t gold is below the weak threshold (0.3 g/t) on the open_pit mining band.
  • Scored from rubric bands during table expansion, not from document context.

Evidence · table

“0.03”

Context: WND26_001

Tags used in scoring

QA/QC Disclosedpositive

Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).

Why it applies: qaqc_disclosed is true

Cut-off Undisclosednegative

High-grade interval reported without stating the cut-off grade used for compositing.

Why it applies: no cutoff_grade was stated

WND26_001Cloncurry · copperGrade: 0.26Grade Unit: %Intercept: 1 mView all details
Link to this fact

Identity

Hole ID
WND26_001
Project
Cloncurry
Commodity
copper
Region
australia_qld
Reported Region
australia_qld
Ticker
TNC

Geometry

Grade
0.26
Grade Unit
%
Intercept
1 m
From
158 m
To
159 m
Intercept Depth
158 m

Classification

Deposit Type
iocg
Sample Type
drill
Group ID
WND26_001:158-159
Mining Method
open_pit

Location

Location
Main Zone
CRS
MGA94 Zone 54
Loc. Source
document

QA/QC

Laboratory
ALS Brisbane
QA/QC Disclosed
Yes
QP Signed
Yes
QA/QC Methods
standards, blanks, duplicates

Metal Equivalent

Metal Eq. Grade
0.45
Metal Eq. Unit
% Cu-Eq
Assumptions Disclosed
Yes

Compositing

Dilution Disclosed
Yes

Review

Needs Review
No
Interp. Status
scored
Historical
No

Dates

Event date
2026-09-29T00:00:00.000Z

Reasoning: Expanded from assay table. 0.26 % copper is weak against the iocg deposit band [0.9, 0.5, 0.3, 0.2] %. Grade×width 0.3 %·m is below (grade alone is weak; the better of the two is used).

Negative factors

  • Scored from rubric bands during table expansion, not from document context.

Evidence · table

“0.26”

Context: WND26_001

Tags used in scoring

QA/QC Disclosedpositive

Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).

Why it applies: qaqc_disclosed is true

Cut-off Undisclosednegative

High-grade interval reported without stating the cut-off grade used for compositing.

Why it applies: no cutoff_grade was stated

WND26_001Cloncurry · goldGrade: 0.19Grade Unit: g/tIntercept: 1 mView all details
Link to this fact

Identity

Hole ID
WND26_001
Project
Cloncurry
Commodity
gold
Region
australia_qld
Reported Region
australia_qld
Ticker
TNC

Geometry

Grade
0.19
Grade Unit
g/t
Intercept
1 m
From
158 m
To
159 m
Intercept Depth
158 m

Classification

Deposit Type
iocg
Sample Type
drill
Group ID
WND26_001:158-159
Mining Method
open_pit

Location

Location
Main Zone
CRS
MGA94 Zone 54
Loc. Source
document

QA/QC

Laboratory
ALS Brisbane
QA/QC Disclosed
Yes
QP Signed
Yes
QA/QC Methods
standards, blanks, duplicates

Metal Equivalent

Metal Eq. Grade
0.45
Metal Eq. Unit
% Cu-Eq
Assumptions Disclosed
Yes

Compositing

Dilution Disclosed
Yes

Review

Needs Review
No
Interp. Status
scored
Historical
No

Dates

Event date
2026-09-29T00:00:00.000Z

Reasoning: Expanded from assay table. 0.19 g/t gold is below against the open_pit mining band [5, 2, 1, 0.3] g/t. Grade×width 0.2 g/t·m is below.

Negative factors

  • 0.19 g/t gold is below the weak threshold (0.3 g/t) on the open_pit mining band.
  • Scored from rubric bands during table expansion, not from document context.

Evidence · table

“0.19”

Context: WND26_001

Tags used in scoring

QA/QC Disclosedpositive

Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).

Why it applies: qaqc_disclosed is true

Cut-off Undisclosednegative

High-grade interval reported without stating the cut-off grade used for compositing.

Why it applies: no cutoff_grade was stated

WND26_001Cloncurry · copperGrade: 0.16Grade Unit: %Intercept: 1 mView all details
Link to this fact

Identity

Hole ID
WND26_001
Project
Cloncurry
Commodity
copper
Region
australia_qld
Reported Region
australia_qld
Ticker
TNC

Geometry

Grade
0.16
Grade Unit
%
Intercept
1 m
From
159 m
To
160 m
Intercept Depth
159 m

Classification

Deposit Type
iocg
Sample Type
drill
Group ID
WND26_001:159-160
Mining Method
open_pit

Location

Location
Main Zone
CRS
MGA94 Zone 54
Loc. Source
document

QA/QC

Laboratory
ALS Brisbane
QA/QC Disclosed
Yes
QP Signed
Yes
QA/QC Methods
standards, blanks, duplicates

Metal Equivalent

Metal Eq. Grade
0.22
Metal Eq. Unit
% Cu-Eq
Assumptions Disclosed
Yes

Compositing

Dilution Disclosed
Yes

Review

Needs Review
No
Interp. Status
scored
Historical
No

Dates

Event date
2026-09-29T00:00:00.000Z

Reasoning: Expanded from assay table. 0.16 % copper is below against the iocg deposit band [0.9, 0.5, 0.3, 0.2] %. Grade×width 0.2 %·m is below.

Negative factors

  • 0.16 % copper is below the weak threshold (0.2 %) on the iocg deposit band.
  • Scored from rubric bands during table expansion, not from document context.

Evidence · table

“0.16”

Context: WND26_001

Tags used in scoring

QA/QC Disclosedpositive

Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).

Why it applies: qaqc_disclosed is true

Cut-off Undisclosednegative

High-grade interval reported without stating the cut-off grade used for compositing.

Why it applies: no cutoff_grade was stated

WND26_001Cloncurry · goldGrade: 0.06Grade Unit: g/tIntercept: 1 mView all details
Link to this fact

Identity

Hole ID
WND26_001
Project
Cloncurry
Commodity
gold
Region
australia_qld
Reported Region
australia_qld
Ticker
TNC

Geometry

Grade
0.06
Grade Unit
g/t
Intercept
1 m
From
159 m
To
160 m
Intercept Depth
159 m

Classification

Deposit Type
iocg
Sample Type
drill
Group ID
WND26_001:159-160
Mining Method
open_pit

Location

Location
Main Zone
CRS
MGA94 Zone 54
Loc. Source
document

QA/QC

Laboratory
ALS Brisbane
QA/QC Disclosed
Yes
QP Signed
Yes
QA/QC Methods
standards, blanks, duplicates

Metal Equivalent

Metal Eq. Grade
0.22
Metal Eq. Unit
% Cu-Eq
Assumptions Disclosed
Yes

Compositing

Dilution Disclosed
Yes

Review

Needs Review
No
Interp. Status
scored
Historical
No

Dates

Event date
2026-09-29T00:00:00.000Z

Reasoning: Expanded from assay table. 0.06 g/t gold is below against the open_pit mining band [5, 2, 1, 0.3] g/t. Grade×width 0.1 g/t·m is below.

Negative factors

  • 0.06 g/t gold is below the weak threshold (0.3 g/t) on the open_pit mining band.
  • Scored from rubric bands during table expansion, not from document context.

Evidence · table

“0.06”

Context: WND26_001

Tags used in scoring

QA/QC Disclosedpositive

Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).

Why it applies: qaqc_disclosed is true

Cut-off Undisclosednegative

High-grade interval reported without stating the cut-off grade used for compositing.

Why it applies: no cutoff_grade was stated

WND26_001Cloncurry · copperGrade: 0.4Grade Unit: %Intercept: 1 mView all details
Link to this fact

Identity

Hole ID
WND26_001
Project
Cloncurry
Commodity
copper
Region
australia_qld
Reported Region
australia_qld
Ticker
TNC

Geometry

Grade
0.4
Grade Unit
%
Intercept
1 m
From
160 m
To
161 m
Intercept Depth
160 m

Classification

Deposit Type
iocg
Sample Type
drill
Group ID
WND26_001:160-161
Mining Method
open_pit

Location

Location
Main Zone
CRS
MGA94 Zone 54
Loc. Source
document

QA/QC

Laboratory
ALS Brisbane
QA/QC Disclosed
Yes
QP Signed
Yes
QA/QC Methods
standards, blanks, duplicates

Metal Equivalent

Metal Eq. Grade
0.96
Metal Eq. Unit
% Cu-Eq
Assumptions Disclosed
Yes

Compositing

Dilution Disclosed
Yes

Review

Needs Review
No
Interp. Status
scored
Historical
No

Dates

Event date
2026-09-29T00:00:00.000Z

Reasoning: Expanded from assay table. 0.4 % copper is moderate against the iocg deposit band [0.9, 0.5, 0.3, 0.2] %. Grade×width 0.4 %·m is below (grade alone is moderate; the better of the two is used).

Negative factors

  • Scored from rubric bands during table expansion, not from document context.

Evidence · table

“0.40”

Context: WND26_001

Tags used in scoring

QA/QC Disclosedpositive

Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).

Why it applies: qaqc_disclosed is true

Cut-off Undisclosednegative

High-grade interval reported without stating the cut-off grade used for compositing.

Why it applies: no cutoff_grade was stated

WND26_001Cloncurry · goldGrade: 0.55Grade Unit: g/tIntercept: 1 mView all details
Link to this fact

Identity

Hole ID
WND26_001
Project
Cloncurry
Commodity
gold
Region
australia_qld
Reported Region
australia_qld
Ticker
TNC

Geometry

Grade
0.55
Grade Unit
g/t
Intercept
1 m
From
160 m
To
161 m
Intercept Depth
160 m

Classification

Deposit Type
iocg
Sample Type
drill
Group ID
WND26_001:160-161
Mining Method
open_pit

Location

Location
Main Zone
CRS
MGA94 Zone 54
Loc. Source
document

QA/QC

Laboratory
ALS Brisbane
QA/QC Disclosed
Yes
QP Signed
Yes
QA/QC Methods
standards, blanks, duplicates

Metal Equivalent

Metal Eq. Grade
0.96
Metal Eq. Unit
% Cu-Eq
Assumptions Disclosed
Yes

Compositing

Dilution Disclosed
Yes

Review

Needs Review
No
Interp. Status
scored
Historical
No

Dates

Event date
2026-09-29T00:00:00.000Z

Reasoning: Expanded from assay table. 0.55 g/t gold is weak against the open_pit mining band [5, 2, 1, 0.3] g/t. Grade×width 0.6 g/t·m is below (grade alone is weak; the better of the two is used).

Negative factors

  • Scored from rubric bands during table expansion, not from document context.

Evidence · table

“0.55”

Context: WND26_001

Tags used in scoring

QA/QC Disclosedpositive

Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).

Why it applies: qaqc_disclosed is true

Cut-off Undisclosednegative

High-grade interval reported without stating the cut-off grade used for compositing.

Why it applies: no cutoff_grade was stated

WND26_001Cloncurry · copperGrade: 1Grade Unit: %Intercept: 1 mView all details
Link to this fact

Identity

Hole ID
WND26_001
Project
Cloncurry
Commodity
copper
Region
australia_qld
Reported Region
australia_qld
Ticker
TNC

Geometry

Grade
1
Grade Unit
%
Intercept
1 m
From
161 m
To
162 m
Intercept Depth
161 m

Classification

Deposit Type
iocg
Sample Type
drill
Group ID
WND26_001:161-162
Mining Method
open_pit

Location

Location
Main Zone
CRS
MGA94 Zone 54
Loc. Source
document

QA/QC

Laboratory
ALS Brisbane
QA/QC Disclosed
Yes
QP Signed
Yes
QA/QC Methods
standards, blanks, duplicates

Metal Equivalent

Metal Eq. Grade
1.24
Metal Eq. Unit
% Cu-Eq
Assumptions Disclosed
Yes

Compositing

Dilution Disclosed
Yes

Review

Needs Review
No
Interp. Status
scored
Historical
No

Dates

Event date
2026-09-29T00:00:00.000Z

Reasoning: Expanded from assay table. 1 % copper is exceptional against the iocg deposit band [0.9, 0.5, 0.3, 0.2] %. Grade×width 1.0 %·m is below (grade alone is exceptional; the better of the two is used).

Positive factors

  • 1 % copper is exceptional on the iocg deposit band.

Negative factors

  • Scored from rubric bands during table expansion, not from document context.

Evidence · table

“1.00”

Context: WND26_001

Tags used in scoring

QA/QC Disclosedpositive

Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).

Why it applies: qaqc_disclosed is true

Cut-off Undisclosednegative

High-grade interval reported without stating the cut-off grade used for compositing.

Why it applies: no cutoff_grade was stated

WND26_001Cloncurry · goldGrade: 0.24Grade Unit: g/tIntercept: 1 mView all details
Link to this fact

Identity

Hole ID
WND26_001
Project
Cloncurry
Commodity
gold
Region
australia_qld
Reported Region
australia_qld
Ticker
TNC

Geometry

Grade
0.24
Grade Unit
g/t
Intercept
1 m
From
161 m
To
162 m
Intercept Depth
161 m

Classification

Deposit Type
iocg
Sample Type
drill
Group ID
WND26_001:161-162
Mining Method
open_pit

Location

Location
Main Zone
CRS
MGA94 Zone 54
Loc. Source
document

QA/QC

Laboratory
ALS Brisbane
QA/QC Disclosed
Yes
QP Signed
Yes
QA/QC Methods
standards, blanks, duplicates

Metal Equivalent

Metal Eq. Grade
1.24
Metal Eq. Unit
% Cu-Eq
Assumptions Disclosed
Yes

Compositing

Dilution Disclosed
Yes

Review

Needs Review
No
Interp. Status
scored
Historical
No

Dates

Event date
2026-09-29T00:00:00.000Z

Reasoning: Expanded from assay table. 0.24 g/t gold is below against the open_pit mining band [5, 2, 1, 0.3] g/t. Grade×width 0.2 g/t·m is below.

Negative factors

  • 0.24 g/t gold is below the weak threshold (0.3 g/t) on the open_pit mining band.
  • Scored from rubric bands during table expansion, not from document context.

Evidence · table

“0.24”

Context: WND26_001

Tags used in scoring

QA/QC Disclosedpositive

Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).

Why it applies: qaqc_disclosed is true

Cut-off Undisclosednegative

High-grade interval reported without stating the cut-off grade used for compositing.

Why it applies: no cutoff_grade was stated

WND26_001Cloncurry · copperGrade: 2.15Grade Unit: %Intercept: 1 mView all details
Link to this fact

Identity

Hole ID
WND26_001
Project
Cloncurry
Commodity
copper
Region
australia_qld
Reported Region
australia_qld
Ticker
TNC

Geometry

Grade
2.15
Grade Unit
%
Intercept
1 m
From
162 m
To
163 m
Intercept Depth
162 m

Classification

Deposit Type
iocg
Sample Type
drill
Group ID
WND26_001:162-163
Mining Method
open_pit

Location

Location
Main Zone
CRS
MGA94 Zone 54
Loc. Source
document

QA/QC

Laboratory
ALS Brisbane
QA/QC Disclosed
Yes
QP Signed
Yes
QA/QC Methods
standards, blanks, duplicates

Metal Equivalent

Metal Eq. Grade
18.1
Metal Eq. Unit
% Cu-Eq
Assumptions Disclosed
Yes

Compositing

Dilution Disclosed
Yes

Review

Needs Review
No
Interp. Status
scored
Historical
No

Dates

Event date
2026-09-29T00:00:00.000Z

Reasoning: Expanded from assay table. 2.15 % copper is exceptional against the iocg deposit band [0.9, 0.5, 0.3, 0.2] %. Grade×width 2.1 %·m is below (grade alone is exceptional; the better of the two is used).

Positive factors

  • 2.15 % copper is exceptional on the iocg deposit band.

Negative factors

  • Scored from rubric bands during table expansion, not from document context.

Evidence · table

“2.15”

Context: WND26_001

Tags used in scoring

QA/QC Disclosedpositive

Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).

Why it applies: qaqc_disclosed is true

Cut-off Undisclosednegative

High-grade interval reported without stating the cut-off grade used for compositing.

Why it applies: no cutoff_grade was stated

WND26_001Cloncurry · goldGrade: 15.75Grade Unit: g/tIntercept: 1 mView all details
Link to this fact

Identity

Hole ID
WND26_001
Project
Cloncurry
Commodity
gold
Region
australia_qld
Reported Region
australia_qld
Ticker
TNC

Geometry

Grade
15.75
Grade Unit
g/t
Intercept
1 m
From
162 m
To
163 m
Intercept Depth
162 m

Classification

Deposit Type
iocg
Sample Type
drill
Group ID
WND26_001:162-163
Mining Method
open_pit

Location

Location
Main Zone
CRS
MGA94 Zone 54
Loc. Source
document

QA/QC

Laboratory
ALS Brisbane
QA/QC Disclosed
Yes
QP Signed
Yes
QA/QC Methods
standards, blanks, duplicates

Metal Equivalent

Metal Eq. Grade
18.1
Metal Eq. Unit
% Cu-Eq
Assumptions Disclosed
Yes

Compositing

Dilution Disclosed
Yes

Review

Needs Review
No
Interp. Status
scored
Historical
No

Dates

Event date
2026-09-29T00:00:00.000Z

Reasoning: Expanded from assay table. 15.75 g/t gold is exceptional against the open_pit mining band [5, 2, 1, 0.3] g/t. Grade×width 15.8 g/t·m is weak (grade alone is exceptional; the better of the two is used).

Positive factors

  • 15.75 g/t gold is exceptional on the open_pit mining band.

Negative factors

  • Scored from rubric bands during table expansion, not from document context.

Evidence · table

“15.75”

Context: WND26_001

Tags used in scoring

QA/QC Disclosedpositive

Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).

Why it applies: qaqc_disclosed is true

Cut-off Undisclosednegative

High-grade interval reported without stating the cut-off grade used for compositing.

Why it applies: no cutoff_grade was stated

WND26_001Cloncurry · copperGrade: 4.74Grade Unit: %Intercept: 1 mView all details
Link to this fact

Identity

Hole ID
WND26_001
Project
Cloncurry
Commodity
copper
Region
australia_qld
Reported Region
australia_qld
Ticker
TNC

Geometry

Grade
4.74
Grade Unit
%
Intercept
1 m
From
163 m
To
164 m
Intercept Depth
163 m

Classification

Deposit Type
iocg
Sample Type
drill
Group ID
WND26_001:163-164
Mining Method
open_pit

Location

Location
Main Zone
CRS
MGA94 Zone 54
Loc. Source
document

QA/QC

Laboratory
ALS Brisbane
QA/QC Disclosed
Yes
QP Signed
Yes
QA/QC Methods
standards, blanks, duplicates

Metal Equivalent

Metal Eq. Grade
6.11
Metal Eq. Unit
% Cu-Eq
Assumptions Disclosed
Yes

Compositing

Dilution Disclosed
Yes

Review

Needs Review
No
Interp. Status
scored
Historical
No

Dates

Event date
2026-09-29T00:00:00.000Z

Reasoning: Expanded from assay table. 4.74 % copper is exceptional against the iocg deposit band [0.9, 0.5, 0.3, 0.2] %. Grade×width 4.7 %·m is below (grade alone is exceptional; the better of the two is used).

Positive factors

  • 4.74 % copper is exceptional on the iocg deposit band.

Negative factors

  • Scored from rubric bands during table expansion, not from document context.

Evidence · table

“4.74”

Context: WND26_001

Tags used in scoring

QA/QC Disclosedpositive

Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).

Why it applies: qaqc_disclosed is true

Cut-off Undisclosednegative

High-grade interval reported without stating the cut-off grade used for compositing.

Why it applies: no cutoff_grade was stated

WND26_001Cloncurry · goldGrade: 1.35Grade Unit: g/tIntercept: 1 mView all details
Link to this fact

Identity

Hole ID
WND26_001
Project
Cloncurry
Commodity
gold
Region
australia_qld
Reported Region
australia_qld
Ticker
TNC

Geometry

Grade
1.35
Grade Unit
g/t
Intercept
1 m
From
163 m
To
164 m
Intercept Depth
163 m

Classification

Deposit Type
iocg
Sample Type
drill
Group ID
WND26_001:163-164
Mining Method
open_pit

Location

Location
Main Zone
CRS
MGA94 Zone 54
Loc. Source
document

QA/QC

Laboratory
ALS Brisbane
QA/QC Disclosed
Yes
QP Signed
Yes
QA/QC Methods
standards, blanks, duplicates

Metal Equivalent

Metal Eq. Grade
6.11
Metal Eq. Unit
% Cu-Eq
Assumptions Disclosed
Yes

Compositing

Dilution Disclosed
Yes

Review

Needs Review
No
Interp. Status
scored
Historical
No

Dates

Event date
2026-09-29T00:00:00.000Z

Reasoning: Expanded from assay table. 1.35 g/t gold is moderate against the open_pit mining band [5, 2, 1, 0.3] g/t. Grade×width 1.4 g/t·m is below (grade alone is moderate; the better of the two is used).

Negative factors

  • Scored from rubric bands during table expansion, not from document context.

Evidence · table

“1.35”

Context: WND26_001

Tags used in scoring

QA/QC Disclosedpositive

Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).

Why it applies: qaqc_disclosed is true

Cut-off Undisclosednegative

High-grade interval reported without stating the cut-off grade used for compositing.

Why it applies: no cutoff_grade was stated

WND26_001Cloncurry · copperGrade: 0.31Grade Unit: %Intercept: 1 mView all details
Link to this fact

Identity

Hole ID
WND26_001
Project
Cloncurry
Commodity
copper
Region
australia_qld
Reported Region
australia_qld
Ticker
TNC

Geometry

Grade
0.31
Grade Unit
%
Intercept
1 m
From
164 m
To
165 m
Intercept Depth
164 m

Classification

Deposit Type
iocg
Sample Type
drill
Group ID
WND26_001:164-165
Mining Method
open_pit

Location

Location
Main Zone
CRS
MGA94 Zone 54
Loc. Source
document

QA/QC

Laboratory
ALS Brisbane
QA/QC Disclosed
Yes
QP Signed
Yes
QA/QC Methods
standards, blanks, duplicates

Metal Equivalent

Metal Eq. Grade
0.43
Metal Eq. Unit
% Cu-Eq
Assumptions Disclosed
Yes

Compositing

Dilution Disclosed
Yes

Review

Needs Review
No
Interp. Status
scored
Historical
No

Dates

Event date
2026-09-29T00:00:00.000Z

Reasoning: Expanded from assay table. 0.31 % copper is moderate against the iocg deposit band [0.9, 0.5, 0.3, 0.2] %. Grade×width 0.3 %·m is below (grade alone is moderate; the better of the two is used).

Negative factors

  • Scored from rubric bands during table expansion, not from document context.

Evidence · table

“0.31”

Context: WND26_001

Tags used in scoring

QA/QC Disclosedpositive

Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).

Why it applies: qaqc_disclosed is true

Cut-off Undisclosednegative

High-grade interval reported without stating the cut-off grade used for compositing.

Why it applies: no cutoff_grade was stated

WND26_001Cloncurry · goldGrade: 0.12Grade Unit: g/tIntercept: 1 mView all details
Link to this fact

Identity

Hole ID
WND26_001
Project
Cloncurry
Commodity
gold
Region
australia_qld
Reported Region
australia_qld
Ticker
TNC

Geometry

Grade
0.12
Grade Unit
g/t
Intercept
1 m
From
164 m
To
165 m
Intercept Depth
164 m

Classification

Deposit Type
iocg
Sample Type
drill
Group ID
WND26_001:164-165
Mining Method
open_pit

Location

Location
Main Zone
CRS
MGA94 Zone 54
Loc. Source
document

QA/QC

Laboratory
ALS Brisbane
QA/QC Disclosed
Yes
QP Signed
Yes
QA/QC Methods
standards, blanks, duplicates

Metal Equivalent

Metal Eq. Grade
0.43
Metal Eq. Unit
% Cu-Eq
Assumptions Disclosed
Yes

Compositing

Dilution Disclosed
Yes

Review

Needs Review
No
Interp. Status
scored
Historical
No

Dates

Event date
2026-09-29T00:00:00.000Z

Reasoning: Expanded from assay table. 0.12 g/t gold is below against the open_pit mining band [5, 2, 1, 0.3] g/t. Grade×width 0.1 g/t·m is below.

Negative factors

  • 0.12 g/t gold is below the weak threshold (0.3 g/t) on the open_pit mining band.
  • Scored from rubric bands during table expansion, not from document context.

Evidence · table

“0.12”

Context: WND26_001

Tags used in scoring

QA/QC Disclosedpositive

Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).

Why it applies: qaqc_disclosed is true

Cut-off Undisclosednegative

High-grade interval reported without stating the cut-off grade used for compositing.

Why it applies: no cutoff_grade was stated

WND26_001Cloncurry · copperGrade: 0.49Grade Unit: %Intercept: 1 mView all details
Link to this fact

Identity

Hole ID
WND26_001
Project
Cloncurry
Commodity
copper
Region
australia_qld
Reported Region
australia_qld
Ticker
TNC

Geometry

Grade
0.49
Grade Unit
%
Intercept
1 m
From
165 m
To
166 m
Intercept Depth
165 m

Classification

Deposit Type
iocg
Sample Type
drill
Group ID
WND26_001:165-166
Mining Method
open_pit

Location

Location
Main Zone
CRS
MGA94 Zone 54
Loc. Source
document

QA/QC

Laboratory
ALS Brisbane
QA/QC Disclosed
Yes
QP Signed
Yes
QA/QC Methods
standards, blanks, duplicates

Metal Equivalent

Metal Eq. Grade
0.64
Metal Eq. Unit
% Cu-Eq
Assumptions Disclosed
Yes

Compositing

Dilution Disclosed
Yes

Review

Needs Review
No
Interp. Status
scored
Historical
No

Dates

Event date
2026-09-29T00:00:00.000Z

Reasoning: Expanded from assay table. 0.49 % copper is moderate against the iocg deposit band [0.9, 0.5, 0.3, 0.2] %. Grade×width 0.5 %·m is below (grade alone is moderate; the better of the two is used).

Negative factors

  • Scored from rubric bands during table expansion, not from document context.

Evidence · table

“0.49”

Context: WND26_001

Tags used in scoring

QA/QC Disclosedpositive

Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).

Why it applies: qaqc_disclosed is true

Cut-off Undisclosednegative

High-grade interval reported without stating the cut-off grade used for compositing.

Why it applies: no cutoff_grade was stated

WND26_001Cloncurry · goldGrade: 0.15Grade Unit: g/tIntercept: 1 mView all details
Link to this fact

Identity

Hole ID
WND26_001
Project
Cloncurry
Commodity
gold
Region
australia_qld
Reported Region
australia_qld
Ticker
TNC

Geometry

Grade
0.15
Grade Unit
g/t
Intercept
1 m
From
165 m
To
166 m
Intercept Depth
165 m

Classification

Deposit Type
iocg
Sample Type
drill
Group ID
WND26_001:165-166
Mining Method
open_pit

Location

Location
Main Zone
CRS
MGA94 Zone 54
Loc. Source
document

QA/QC

Laboratory
ALS Brisbane
QA/QC Disclosed
Yes
QP Signed
Yes
QA/QC Methods
standards, blanks, duplicates

Metal Equivalent

Metal Eq. Grade
0.64
Metal Eq. Unit
% Cu-Eq
Assumptions Disclosed
Yes

Compositing

Dilution Disclosed
Yes

Review

Needs Review
No
Interp. Status
scored
Historical
No

Dates

Event date
2026-09-29T00:00:00.000Z

Reasoning: Expanded from assay table. 0.15 g/t gold is below against the open_pit mining band [5, 2, 1, 0.3] g/t. Grade×width 0.1 g/t·m is below.

Negative factors

  • 0.15 g/t gold is below the weak threshold (0.3 g/t) on the open_pit mining band.
  • Scored from rubric bands during table expansion, not from document context.

Evidence · table

“0.15”

Context: WND26_001

Tags used in scoring

QA/QC Disclosedpositive

Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).

Why it applies: qaqc_disclosed is true

Cut-off Undisclosednegative

High-grade interval reported without stating the cut-off grade used for compositing.

Why it applies: no cutoff_grade was stated

WND26_001Cloncurry · copperGrade: 3.9Grade Unit: %Intercept: 1 mView all details
Link to this fact

Identity

Hole ID
WND26_001
Project
Cloncurry
Commodity
copper
Region
australia_qld
Reported Region
australia_qld
Ticker
TNC

Geometry

Grade
3.9
Grade Unit
%
Intercept
1 m
From
166 m
To
167 m
Intercept Depth
166 m

Classification

Deposit Type
iocg
Sample Type
drill
Group ID
WND26_001:166-167
Mining Method
open_pit

Location

Location
Main Zone
CRS
MGA94 Zone 54
Loc. Source
document

QA/QC

Laboratory
ALS Brisbane
QA/QC Disclosed
Yes
QP Signed
Yes
QA/QC Methods
standards, blanks, duplicates

Metal Equivalent

Metal Eq. Grade
5.27
Metal Eq. Unit
% Cu-Eq
Assumptions Disclosed
Yes

Compositing

Dilution Disclosed
Yes

Review

Needs Review
No
Interp. Status
scored
Historical
No

Dates

Event date
2026-09-29T00:00:00.000Z

Reasoning: Expanded from assay table. 3.9 % copper is exceptional against the iocg deposit band [0.9, 0.5, 0.3, 0.2] %. Grade×width 3.9 %·m is below (grade alone is exceptional; the better of the two is used).

Positive factors

  • 3.9 % copper is exceptional on the iocg deposit band.

Negative factors

  • Scored from rubric bands during table expansion, not from document context.

Evidence · table

“3.90”

Context: WND26_001

Tags used in scoring

QA/QC Disclosedpositive

Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).

Why it applies: qaqc_disclosed is true

Cut-off Undisclosednegative

High-grade interval reported without stating the cut-off grade used for compositing.

Why it applies: no cutoff_grade was stated

WND26_001Cloncurry · goldGrade: 1.35Grade Unit: g/tIntercept: 1 mView all details
Link to this fact

Identity

Hole ID
WND26_001
Project
Cloncurry
Commodity
gold
Region
australia_qld
Reported Region
australia_qld
Ticker
TNC

Geometry

Grade
1.35
Grade Unit
g/t
Intercept
1 m
From
166 m
To
167 m
Intercept Depth
166 m

Classification

Deposit Type
iocg
Sample Type
drill
Group ID
WND26_001:166-167
Mining Method
open_pit

Location

Location
Main Zone
CRS
MGA94 Zone 54
Loc. Source
document

QA/QC

Laboratory
ALS Brisbane
QA/QC Disclosed
Yes
QP Signed
Yes
QA/QC Methods
standards, blanks, duplicates

Metal Equivalent

Metal Eq. Grade
5.27
Metal Eq. Unit
% Cu-Eq
Assumptions Disclosed
Yes

Compositing

Dilution Disclosed
Yes

Review

Needs Review
No
Interp. Status
scored
Historical
No

Dates

Event date
2026-09-29T00:00:00.000Z

Reasoning: Expanded from assay table. 1.35 g/t gold is moderate against the open_pit mining band [5, 2, 1, 0.3] g/t. Grade×width 1.4 g/t·m is below (grade alone is moderate; the better of the two is used).

Negative factors

  • Scored from rubric bands during table expansion, not from document context.

Evidence · table

“1.35”

Context: WND26_001

Tags used in scoring

QA/QC Disclosedpositive

Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).

Why it applies: qaqc_disclosed is true

Cut-off Undisclosednegative

High-grade interval reported without stating the cut-off grade used for compositing.

Why it applies: no cutoff_grade was stated

WND26_001Cloncurry · copperGrade: 1.68Grade Unit: %Intercept: 1 mView all details
Link to this fact

Identity

Hole ID
WND26_001
Project
Cloncurry
Commodity
copper
Region
australia_qld
Reported Region
australia_qld
Ticker
TNC

Geometry

Grade
1.68
Grade Unit
%
Intercept
1 m
From
167 m
To
168 m
Intercept Depth
167 m

Classification

Deposit Type
iocg
Sample Type
drill
Group ID
WND26_001:167-168
Mining Method
open_pit

Location

Location
Main Zone
CRS
MGA94 Zone 54
Loc. Source
document

QA/QC

Laboratory
ALS Brisbane
QA/QC Disclosed
Yes
QP Signed
Yes
QA/QC Methods
standards, blanks, duplicates

Metal Equivalent

Metal Eq. Grade
2.22
Metal Eq. Unit
% Cu-Eq
Assumptions Disclosed
Yes

Compositing

Dilution Disclosed
Yes

Review

Needs Review
No
Interp. Status
scored
Historical
No

Dates

Event date
2026-09-29T00:00:00.000Z

Reasoning: Expanded from assay table. 1.68 % copper is exceptional against the iocg deposit band [0.9, 0.5, 0.3, 0.2] %. Grade×width 1.7 %·m is below (grade alone is exceptional; the better of the two is used).

Positive factors

  • 1.68 % copper is exceptional on the iocg deposit band.

Negative factors

  • Scored from rubric bands during table expansion, not from document context.

Evidence · table

“1.68”

Context: WND26_001

Tags used in scoring

QA/QC Disclosedpositive

Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).

Why it applies: qaqc_disclosed is true

Cut-off Undisclosednegative

High-grade interval reported without stating the cut-off grade used for compositing.

Why it applies: no cutoff_grade was stated

WND26_001Cloncurry · goldGrade: 0.53Grade Unit: g/tIntercept: 1 mView all details
Link to this fact

Identity

Hole ID
WND26_001
Project
Cloncurry
Commodity
gold
Region
australia_qld
Reported Region
australia_qld
Ticker
TNC

Geometry

Grade
0.53
Grade Unit
g/t
Intercept
1 m
From
167 m
To
168 m
Intercept Depth
167 m

Classification

Deposit Type
iocg
Sample Type
drill
Group ID
WND26_001:167-168
Mining Method
open_pit

Location

Location
Main Zone
CRS
MGA94 Zone 54
Loc. Source
document

QA/QC

Laboratory
ALS Brisbane
QA/QC Disclosed
Yes
QP Signed
Yes
QA/QC Methods
standards, blanks, duplicates

Metal Equivalent

Metal Eq. Grade
2.22
Metal Eq. Unit
% Cu-Eq
Assumptions Disclosed
Yes

Compositing

Dilution Disclosed
Yes

Review

Needs Review
No
Interp. Status
scored
Historical
No

Dates

Event date
2026-09-29T00:00:00.000Z

Reasoning: Expanded from assay table. 0.53 g/t gold is weak against the open_pit mining band [5, 2, 1, 0.3] g/t. Grade×width 0.5 g/t·m is below (grade alone is weak; the better of the two is used).

Negative factors

  • Scored from rubric bands during table expansion, not from document context.

Evidence · table

“0.53”

Context: WND26_001

Tags used in scoring

QA/QC Disclosedpositive

Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).

Why it applies: qaqc_disclosed is true

Cut-off Undisclosednegative

High-grade interval reported without stating the cut-off grade used for compositing.

Why it applies: no cutoff_grade was stated

WND26_001Cloncurry · copperGrade: 2.1Grade Unit: %Intercept: 1 mView all details
Link to this fact

Identity

Hole ID
WND26_001
Project
Cloncurry
Commodity
copper
Region
australia_qld
Reported Region
australia_qld
Ticker
TNC

Geometry

Grade
2.1
Grade Unit
%
Intercept
1 m
From
168 m
To
169 m
Intercept Depth
168 m

Classification

Deposit Type
iocg
Sample Type
drill
Group ID
WND26_001:168-169
Mining Method
open_pit

Location

Location
Main Zone
CRS
MGA94 Zone 54
Loc. Source
document

QA/QC

Laboratory
ALS Brisbane
QA/QC Disclosed
Yes
QP Signed
Yes
QA/QC Methods
standards, blanks, duplicates

Metal Equivalent

Metal Eq. Grade
2.64
Metal Eq. Unit
% Cu-Eq
Assumptions Disclosed
Yes

Compositing

Dilution Disclosed
Yes

Review

Needs Review
No
Interp. Status
scored
Historical
No

Dates

Event date
2026-09-29T00:00:00.000Z

Reasoning: Expanded from assay table. 2.1 % copper is exceptional against the iocg deposit band [0.9, 0.5, 0.3, 0.2] %. Grade×width 2.1 %·m is below (grade alone is exceptional; the better of the two is used).

Positive factors

  • 2.1 % copper is exceptional on the iocg deposit band.

Negative factors

  • Scored from rubric bands during table expansion, not from document context.

Evidence · table

“2.10”

Context: WND26_001

Tags used in scoring

QA/QC Disclosedpositive

Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).

Why it applies: qaqc_disclosed is true

Cut-off Undisclosednegative

High-grade interval reported without stating the cut-off grade used for compositing.

Why it applies: no cutoff_grade was stated

WND26_001Cloncurry · goldGrade: 0.53Grade Unit: g/tIntercept: 1 mView all details
Link to this fact

Identity

Hole ID
WND26_001
Project
Cloncurry
Commodity
gold
Region
australia_qld
Reported Region
australia_qld
Ticker
TNC

Geometry

Grade
0.53
Grade Unit
g/t
Intercept
1 m
From
168 m
To
169 m
Intercept Depth
168 m

Classification

Deposit Type
iocg
Sample Type
drill
Group ID
WND26_001:168-169
Mining Method
open_pit

Location

Location
Main Zone
CRS
MGA94 Zone 54
Loc. Source
document

QA/QC

Laboratory
ALS Brisbane
QA/QC Disclosed
Yes
QP Signed
Yes
QA/QC Methods
standards, blanks, duplicates

Metal Equivalent

Metal Eq. Grade
2.64
Metal Eq. Unit
% Cu-Eq
Assumptions Disclosed
Yes

Compositing

Dilution Disclosed
Yes

Review

Needs Review
No
Interp. Status
scored
Historical
No

Dates

Event date
2026-09-29T00:00:00.000Z

Reasoning: Expanded from assay table. 0.53 g/t gold is weak against the open_pit mining band [5, 2, 1, 0.3] g/t. Grade×width 0.5 g/t·m is below (grade alone is weak; the better of the two is used).

Negative factors

  • Scored from rubric bands during table expansion, not from document context.

Evidence · table

“0.53”

Context: WND26_001

Tags used in scoring

QA/QC Disclosedpositive

Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).

Why it applies: qaqc_disclosed is true

Cut-off Undisclosednegative

High-grade interval reported without stating the cut-off grade used for compositing.

Why it applies: no cutoff_grade was stated

WND26_001Cloncurry · copperGrade: 3.25Grade Unit: %Intercept: 1 mView all details
Link to this fact

Identity

Hole ID
WND26_001
Project
Cloncurry
Commodity
copper
Region
australia_qld
Reported Region
australia_qld
Ticker
TNC

Geometry

Grade
3.25
Grade Unit
%
Intercept
1 m
From
169 m
To
170 m
Intercept Depth
169 m

Classification

Deposit Type
iocg
Sample Type
drill
Group ID
WND26_001:169-170
Mining Method
open_pit

Location

Location
Main Zone
CRS
MGA94 Zone 54
Loc. Source
document

QA/QC

Laboratory
ALS Brisbane
QA/QC Disclosed
Yes
QP Signed
Yes
QA/QC Methods
standards, blanks, duplicates

Metal Equivalent

Metal Eq. Grade
3.78
Metal Eq. Unit
% Cu-Eq
Assumptions Disclosed
Yes

Compositing

Dilution Disclosed
Yes

Review

Needs Review
No
Interp. Status
scored
Historical
No

Dates

Event date
2026-09-29T00:00:00.000Z

Reasoning: Expanded from assay table. 3.25 % copper is exceptional against the iocg deposit band [0.9, 0.5, 0.3, 0.2] %. Grade×width 3.3 %·m is below (grade alone is exceptional; the better of the two is used).

Positive factors

  • 3.25 % copper is exceptional on the iocg deposit band.

Negative factors

  • Scored from rubric bands during table expansion, not from document context.

Evidence · table

“3.25”

Context: WND26_001

Tags used in scoring

QA/QC Disclosedpositive

Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).

Why it applies: qaqc_disclosed is true

Cut-off Undisclosednegative

High-grade interval reported without stating the cut-off grade used for compositing.

Why it applies: no cutoff_grade was stated

WND26_001Cloncurry · goldGrade: 0.52Grade Unit: g/tIntercept: 1 mView all details
Link to this fact

Identity

Hole ID
WND26_001
Project
Cloncurry
Commodity
gold
Region
australia_qld
Reported Region
australia_qld
Ticker
TNC

Geometry

Grade
0.52
Grade Unit
g/t
Intercept
1 m
From
169 m
To
170 m
Intercept Depth
169 m

Classification

Deposit Type
iocg
Sample Type
drill
Group ID
WND26_001:169-170
Mining Method
open_pit

Location

Location
Main Zone
CRS
MGA94 Zone 54
Loc. Source
document

QA/QC

Laboratory
ALS Brisbane
QA/QC Disclosed
Yes
QP Signed
Yes
QA/QC Methods
standards, blanks, duplicates

Metal Equivalent

Metal Eq. Grade
3.78
Metal Eq. Unit
% Cu-Eq
Assumptions Disclosed
Yes

Compositing

Dilution Disclosed
Yes

Review

Needs Review
No
Interp. Status
scored
Historical
No

Dates

Event date
2026-09-29T00:00:00.000Z

Reasoning: Expanded from assay table. 0.52 g/t gold is weak against the open_pit mining band [5, 2, 1, 0.3] g/t. Grade×width 0.5 g/t·m is below (grade alone is weak; the better of the two is used).

Negative factors

  • Scored from rubric bands during table expansion, not from document context.

Evidence · table

“0.52”

Context: WND26_001

Tags used in scoring

QA/QC Disclosedpositive

Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).

Why it applies: qaqc_disclosed is true

Cut-off Undisclosednegative

High-grade interval reported without stating the cut-off grade used for compositing.

Why it applies: no cutoff_grade was stated

WND26_001Cloncurry · copperGrade: 1.61Grade Unit: %Intercept: 1 mView all details
Link to this fact

Identity

Hole ID
WND26_001
Project
Cloncurry
Commodity
copper
Region
australia_qld
Reported Region
australia_qld
Ticker
TNC

Geometry

Grade
1.61
Grade Unit
%
Intercept
1 m
From
170 m
To
171 m
Intercept Depth
170 m

Classification

Deposit Type
iocg
Sample Type
drill
Group ID
WND26_001:170-171
Mining Method
open_pit

Location

Location
Main Zone
CRS
MGA94 Zone 54
Loc. Source
document

QA/QC

Laboratory
ALS Brisbane
QA/QC Disclosed
Yes
QP Signed
Yes
QA/QC Methods
standards, blanks, duplicates

Metal Equivalent

Metal Eq. Grade
3.24
Metal Eq. Unit
% Cu-Eq
Assumptions Disclosed
Yes

Compositing

Dilution Disclosed
Yes

Review

Needs Review
No
Interp. Status
scored
Historical
No

Dates

Event date
2026-09-29T00:00:00.000Z

Reasoning: Expanded from assay table. 1.61 % copper is exceptional against the iocg deposit band [0.9, 0.5, 0.3, 0.2] %. Grade×width 1.6 %·m is below (grade alone is exceptional; the better of the two is used).

Positive factors

  • 1.61 % copper is exceptional on the iocg deposit band.

Negative factors

  • Scored from rubric bands during table expansion, not from document context.

Evidence · table

“1.61”

Context: WND26_001

Tags used in scoring

QA/QC Disclosedpositive

Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).

Why it applies: qaqc_disclosed is true

Cut-off Undisclosednegative

High-grade interval reported without stating the cut-off grade used for compositing.

Why it applies: no cutoff_grade was stated

WND26_001Cloncurry · goldGrade: 1.61Grade Unit: g/tIntercept: 1 mView all details
Link to this fact

Identity

Hole ID
WND26_001
Project
Cloncurry
Commodity
gold
Region
australia_qld
Reported Region
australia_qld
Ticker
TNC

Geometry

Grade
1.61
Grade Unit
g/t
Intercept
1 m
From
170 m
To
171 m
Intercept Depth
170 m

Classification

Deposit Type
iocg
Sample Type
drill
Group ID
WND26_001:170-171
Mining Method
open_pit

Location

Location
Main Zone
CRS
MGA94 Zone 54
Loc. Source
document

QA/QC

Laboratory
ALS Brisbane
QA/QC Disclosed
Yes
QP Signed
Yes
QA/QC Methods
standards, blanks, duplicates

Metal Equivalent

Metal Eq. Grade
3.24
Metal Eq. Unit
% Cu-Eq
Assumptions Disclosed
Yes

Compositing

Dilution Disclosed
Yes

Review

Needs Review
No
Interp. Status
scored
Historical
No

Dates

Event date
2026-09-29T00:00:00.000Z

Reasoning: Expanded from assay table. 1.61 g/t gold is moderate against the open_pit mining band [5, 2, 1, 0.3] g/t. Grade×width 1.6 g/t·m is below (grade alone is moderate; the better of the two is used).

Negative factors

  • Scored from rubric bands during table expansion, not from document context.

Evidence · table

“1.61”

Context: WND26_001

Tags used in scoring

QA/QC Disclosedpositive

Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).

Why it applies: qaqc_disclosed is true

Cut-off Undisclosednegative

High-grade interval reported without stating the cut-off grade used for compositing.

Why it applies: no cutoff_grade was stated

WND26_001Cloncurry · copperGrade: 2.77Grade Unit: %Intercept: 1 mView all details
Link to this fact

Identity

Hole ID
WND26_001
Project
Cloncurry
Commodity
copper
Region
australia_qld
Reported Region
australia_qld
Ticker
TNC

Geometry

Grade
2.77
Grade Unit
%
Intercept
1 m
From
171 m
To
172 m
Intercept Depth
171 m

Classification

Deposit Type
iocg
Sample Type
drill
Group ID
WND26_001:171-172
Mining Method
open_pit

Location

Location
Main Zone
CRS
MGA94 Zone 54
Loc. Source
document

QA/QC

Laboratory
ALS Brisbane
QA/QC Disclosed
Yes
QP Signed
Yes
QA/QC Methods
standards, blanks, duplicates

Metal Equivalent

Metal Eq. Grade
3.41
Metal Eq. Unit
% Cu-Eq
Assumptions Disclosed
Yes

Compositing

Dilution Disclosed
Yes

Review

Needs Review
No
Interp. Status
scored
Historical
No

Dates

Event date
2026-09-29T00:00:00.000Z

Reasoning: Expanded from assay table. 2.77 % copper is exceptional against the iocg deposit band [0.9, 0.5, 0.3, 0.2] %. Grade×width 2.8 %·m is below (grade alone is exceptional; the better of the two is used).

Positive factors

  • 2.77 % copper is exceptional on the iocg deposit band.

Negative factors

  • Scored from rubric bands during table expansion, not from document context.

Evidence · table

“2.77”

Context: WND26_001

Tags used in scoring

QA/QC Disclosedpositive

Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).

Why it applies: qaqc_disclosed is true

Cut-off Undisclosednegative

High-grade interval reported without stating the cut-off grade used for compositing.

Why it applies: no cutoff_grade was stated

WND26_001Cloncurry · goldGrade: 0.63Grade Unit: g/tIntercept: 1 mView all details
Link to this fact

Identity

Hole ID
WND26_001
Project
Cloncurry
Commodity
gold
Region
australia_qld
Reported Region
australia_qld
Ticker
TNC

Geometry

Grade
0.63
Grade Unit
g/t
Intercept
1 m
From
171 m
To
172 m
Intercept Depth
171 m

Classification

Deposit Type
iocg
Sample Type
drill
Group ID
WND26_001:171-172
Mining Method
open_pit

Location

Location
Main Zone
CRS
MGA94 Zone 54
Loc. Source
document

QA/QC

Laboratory
ALS Brisbane
QA/QC Disclosed
Yes
QP Signed
Yes
QA/QC Methods
standards, blanks, duplicates

Metal Equivalent

Metal Eq. Grade
3.41
Metal Eq. Unit
% Cu-Eq
Assumptions Disclosed
Yes

Compositing

Dilution Disclosed
Yes

Review

Needs Review
No
Interp. Status
scored
Historical
No

Dates

Event date
2026-09-29T00:00:00.000Z

Reasoning: Expanded from assay table. 0.63 g/t gold is weak against the open_pit mining band [5, 2, 1, 0.3] g/t. Grade×width 0.6 g/t·m is below (grade alone is weak; the better of the two is used).

Negative factors

  • Scored from rubric bands during table expansion, not from document context.

Evidence · table

“0.63”

Context: WND26_001

Tags used in scoring

QA/QC Disclosedpositive

Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).

Why it applies: qaqc_disclosed is true

Cut-off Undisclosednegative

High-grade interval reported without stating the cut-off grade used for compositing.

Why it applies: no cutoff_grade was stated

WND26_001Cloncurry · copperGrade: 0.02Grade Unit: %Intercept: 1 mView all details
Link to this fact

Identity

Hole ID
WND26_001
Project
Cloncurry
Commodity
copper
Region
australia_qld
Reported Region
australia_qld
Ticker
TNC

Geometry

Grade
0.02
Grade Unit
%
Intercept
1 m
From
172 m
To
173 m
Intercept Depth
172 m

Classification

Deposit Type
iocg
Sample Type
drill
Group ID
WND26_001:172-173
Mining Method
open_pit

Location

Location
Main Zone
CRS
MGA94 Zone 54
Loc. Source
document

QA/QC

Laboratory
ALS Brisbane
QA/QC Disclosed
Yes
QP Signed
Yes
QA/QC Methods
standards, blanks, duplicates

Metal Equivalent

Metal Eq. Grade
0.04
Metal Eq. Unit
% Cu-Eq
Assumptions Disclosed
Yes

Compositing

Dilution Disclosed
Yes

Review

Needs Review
No
Interp. Status
scored
Historical
No

Dates

Event date
2026-09-29T00:00:00.000Z

Reasoning: Expanded from assay table. 0.02 % copper is below against the iocg deposit band [0.9, 0.5, 0.3, 0.2] %. Grade×width 0.0 %·m is below.

Negative factors

  • 0.02 % copper is below the weak threshold (0.2 %) on the iocg deposit band.
  • Scored from rubric bands during table expansion, not from document context.

Evidence · table

“0.02”

Context: WND26_001

Tags used in scoring

QA/QC Disclosedpositive

Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).

Why it applies: qaqc_disclosed is true

Cut-off Undisclosednegative

High-grade interval reported without stating the cut-off grade used for compositing.

Why it applies: no cutoff_grade was stated

WND26_001Cloncurry · goldGrade: 0.02Grade Unit: g/tIntercept: 1 mView all details
Link to this fact

Identity

Hole ID
WND26_001
Project
Cloncurry
Commodity
gold
Region
australia_qld
Reported Region
australia_qld
Ticker
TNC

Geometry

Grade
0.02
Grade Unit
g/t
Intercept
1 m
From
172 m
To
173 m
Intercept Depth
172 m

Classification

Deposit Type
iocg
Sample Type
drill
Group ID
WND26_001:172-173
Mining Method
open_pit

Location

Location
Main Zone
CRS
MGA94 Zone 54
Loc. Source
document

QA/QC

Laboratory
ALS Brisbane
QA/QC Disclosed
Yes
QP Signed
Yes
QA/QC Methods
standards, blanks, duplicates

Metal Equivalent

Metal Eq. Grade
0.04
Metal Eq. Unit
% Cu-Eq
Assumptions Disclosed
Yes

Compositing

Dilution Disclosed
Yes

Review

Needs Review
No
Interp. Status
scored
Historical
No

Dates

Event date
2026-09-29T00:00:00.000Z

Reasoning: Expanded from assay table. 0.02 g/t gold is below against the open_pit mining band [5, 2, 1, 0.3] g/t. Grade×width 0.0 g/t·m is below.

Negative factors

  • 0.02 g/t gold is below the weak threshold (0.3 g/t) on the open_pit mining band.
  • Scored from rubric bands during table expansion, not from document context.

Evidence · table

“0.02”

Context: WND26_001

Tags used in scoring

QA/QC Disclosedpositive

Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).

Why it applies: qaqc_disclosed is true

Cut-off Undisclosednegative

High-grade interval reported without stating the cut-off grade used for compositing.

Why it applies: no cutoff_grade was stated

WND26_001Cloncurry · copperGrade: 0.01Grade Unit: %Intercept: 1 mView all details
Link to this fact

Identity

Hole ID
WND26_001
Project
Cloncurry
Commodity
copper
Region
australia_qld
Reported Region
australia_qld
Ticker
TNC

Geometry

Grade
0.01
Grade Unit
%
Intercept
1 m
From
173 m
To
174 m
Intercept Depth
173 m

Classification

Deposit Type
iocg
Sample Type
drill
Group ID
WND26_001:173-174
Mining Method
open_pit

Location

Location
Main Zone
CRS
MGA94 Zone 54
Loc. Source
document

QA/QC

Laboratory
ALS Brisbane
QA/QC Disclosed
Yes
QP Signed
Yes
QA/QC Methods
standards, blanks, duplicates

Metal Equivalent

Metal Eq. Grade
0.02
Metal Eq. Unit
% Cu-Eq
Assumptions Disclosed
Yes

Compositing

Dilution Disclosed
Yes

Review

Needs Review
No
Interp. Status
scored
Historical
No

Dates

Event date
2026-09-29T00:00:00.000Z

Reasoning: Expanded from assay table. 0.01 % copper is below against the iocg deposit band [0.9, 0.5, 0.3, 0.2] %. Grade×width 0.0 %·m is below.

Negative factors

  • 0.01 % copper is below the weak threshold (0.2 %) on the iocg deposit band.
  • Scored from rubric bands during table expansion, not from document context.

Evidence · table

“0.01”

Context: WND26_001

Tags used in scoring

QA/QC Disclosedpositive

Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).

Why it applies: qaqc_disclosed is true

Cut-off Undisclosednegative

High-grade interval reported without stating the cut-off grade used for compositing.

Why it applies: no cutoff_grade was stated

WND26_001Cloncurry · goldGrade: 0.01Grade Unit: g/tIntercept: 1 mView all details
Link to this fact

Identity

Hole ID
WND26_001
Project
Cloncurry
Commodity
gold
Region
australia_qld
Reported Region
australia_qld
Ticker
TNC

Geometry

Grade
0.01
Grade Unit
g/t
Intercept
1 m
From
173 m
To
174 m
Intercept Depth
173 m

Classification

Deposit Type
iocg
Sample Type
drill
Group ID
WND26_001:173-174
Mining Method
open_pit

Location

Location
Main Zone
CRS
MGA94 Zone 54
Loc. Source
document

QA/QC

Laboratory
ALS Brisbane
QA/QC Disclosed
Yes
QP Signed
Yes
QA/QC Methods
standards, blanks, duplicates

Metal Equivalent

Metal Eq. Grade
0.02
Metal Eq. Unit
% Cu-Eq
Assumptions Disclosed
Yes

Compositing

Dilution Disclosed
Yes

Review

Needs Review
No
Interp. Status
scored
Historical
No

Dates

Event date
2026-09-29T00:00:00.000Z

Reasoning: Expanded from assay table. 0.01 g/t gold is below against the open_pit mining band [5, 2, 1, 0.3] g/t. Grade×width 0.0 g/t·m is below.

Negative factors

  • 0.01 g/t gold is below the weak threshold (0.3 g/t) on the open_pit mining band.
  • Scored from rubric bands during table expansion, not from document context.

Evidence · table

“0.01”

Context: WND26_001

Tags used in scoring

QA/QC Disclosedpositive

Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).

Why it applies: qaqc_disclosed is true

Cut-off Undisclosednegative

High-grade interval reported without stating the cut-off grade used for compositing.

Why it applies: no cutoff_grade was stated

WND26_001Cloncurry · copperGrade: 0.02Grade Unit: %Intercept: 1 mView all details
Link to this fact

Identity

Hole ID
WND26_001
Project
Cloncurry
Commodity
copper
Region
australia_qld
Reported Region
australia_qld
Ticker
TNC

Geometry

Grade
0.02
Grade Unit
%
Intercept
1 m
From
174 m
To
175 m
Intercept Depth
174 m

Classification

Deposit Type
iocg
Sample Type
drill
Group ID
WND26_001:174-175
Mining Method
open_pit

Location

Location
Main Zone
CRS
MGA94 Zone 54
Loc. Source
document

QA/QC

Laboratory
ALS Brisbane
QA/QC Disclosed
Yes
QP Signed
Yes
QA/QC Methods
standards, blanks, duplicates

Metal Equivalent

Metal Eq. Grade
0.03
Metal Eq. Unit
% Cu-Eq
Assumptions Disclosed
Yes

Compositing

Dilution Disclosed
Yes

Review

Needs Review
No
Interp. Status
scored
Historical
No

Dates

Event date
2026-09-29T00:00:00.000Z

Reasoning: Expanded from assay table. 0.02 % copper is below against the iocg deposit band [0.9, 0.5, 0.3, 0.2] %. Grade×width 0.0 %·m is below.

Negative factors

  • 0.02 % copper is below the weak threshold (0.2 %) on the iocg deposit band.
  • Scored from rubric bands during table expansion, not from document context.

Evidence · table

“0.02”

Context: WND26_001

Tags used in scoring

QA/QC Disclosedpositive

Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).

Why it applies: qaqc_disclosed is true

Cut-off Undisclosednegative

High-grade interval reported without stating the cut-off grade used for compositing.

Why it applies: no cutoff_grade was stated

WND26_001Cloncurry · goldGrade: 0.01Grade Unit: g/tIntercept: 1 mView all details
Link to this fact

Identity

Hole ID
WND26_001
Project
Cloncurry
Commodity
gold
Region
australia_qld
Reported Region
australia_qld
Ticker
TNC

Geometry

Grade
0.01
Grade Unit
g/t
Intercept
1 m
From
174 m
To
175 m
Intercept Depth
174 m

Classification

Deposit Type
iocg
Sample Type
drill
Group ID
WND26_001:174-175
Mining Method
open_pit

Location

Location
Main Zone
CRS
MGA94 Zone 54
Loc. Source
document

QA/QC

Laboratory
ALS Brisbane
QA/QC Disclosed
Yes
QP Signed
Yes
QA/QC Methods
standards, blanks, duplicates

Metal Equivalent

Metal Eq. Grade
0.03
Metal Eq. Unit
% Cu-Eq
Assumptions Disclosed
Yes

Compositing

Dilution Disclosed
Yes

Review

Needs Review
No
Interp. Status
scored
Historical
No

Dates

Event date
2026-09-29T00:00:00.000Z

Reasoning: Expanded from assay table. 0.01 g/t gold is below against the open_pit mining band [5, 2, 1, 0.3] g/t. Grade×width 0.0 g/t·m is below.

Negative factors

  • 0.01 g/t gold is below the weak threshold (0.3 g/t) on the open_pit mining band.
  • Scored from rubric bands during table expansion, not from document context.

Evidence · table

“0.01”

Context: WND26_001

Tags used in scoring

QA/QC Disclosedpositive

Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).

Why it applies: qaqc_disclosed is true

Cut-off Undisclosednegative

High-grade interval reported without stating the cut-off grade used for compositing.

Why it applies: no cutoff_grade was stated

WND26_001Cloncurry · copperGrade: 0.01Grade Unit: %Intercept: 1 mView all details
Link to this fact

Identity

Hole ID
WND26_001
Project
Cloncurry
Commodity
copper
Region
australia_qld
Reported Region
australia_qld
Ticker
TNC

Geometry

Grade
0.01
Grade Unit
%
Intercept
1 m
From
175 m
To
176 m
Intercept Depth
175 m

Classification

Deposit Type
iocg
Sample Type
drill
Group ID
WND26_001:175-176
Mining Method
open_pit

Location

Location
Main Zone
CRS
MGA94 Zone 54
Loc. Source
document

QA/QC

Laboratory
ALS Brisbane
QA/QC Disclosed
Yes
QP Signed
Yes
QA/QC Methods
standards, blanks, duplicates

Metal Equivalent

Metal Eq. Grade
0.02
Metal Eq. Unit
% Cu-Eq
Assumptions Disclosed
Yes

Compositing

Dilution Disclosed
Yes

Review

Needs Review
No
Interp. Status
scored
Historical
No

Dates

Event date
2026-09-29T00:00:00.000Z

Reasoning: Expanded from assay table. 0.01 % copper is below against the iocg deposit band [0.9, 0.5, 0.3, 0.2] %. Grade×width 0.0 %·m is below.

Negative factors

  • 0.01 % copper is below the weak threshold (0.2 %) on the iocg deposit band.
  • Scored from rubric bands during table expansion, not from document context.

Evidence · table

“0.01”

Context: WND26_001

Tags used in scoring

QA/QC Disclosedpositive

Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).

Why it applies: qaqc_disclosed is true

Cut-off Undisclosednegative

High-grade interval reported without stating the cut-off grade used for compositing.

Why it applies: no cutoff_grade was stated

WND26_001Cloncurry · goldGrade: 0.01Grade Unit: g/tIntercept: 1 mView all details
Link to this fact

Identity

Hole ID
WND26_001
Project
Cloncurry
Commodity
gold
Region
australia_qld
Reported Region
australia_qld
Ticker
TNC

Geometry

Grade
0.01
Grade Unit
g/t
Intercept
1 m
From
175 m
To
176 m
Intercept Depth
175 m

Classification

Deposit Type
iocg
Sample Type
drill
Group ID
WND26_001:175-176
Mining Method
open_pit

Location

Location
Main Zone
CRS
MGA94 Zone 54
Loc. Source
document

QA/QC

Laboratory
ALS Brisbane
QA/QC Disclosed
Yes
QP Signed
Yes
QA/QC Methods
standards, blanks, duplicates

Metal Equivalent

Metal Eq. Grade
0.02
Metal Eq. Unit
% Cu-Eq
Assumptions Disclosed
Yes

Compositing

Dilution Disclosed
Yes

Review

Needs Review
No
Interp. Status
scored
Historical
No

Dates

Event date
2026-09-29T00:00:00.000Z

Reasoning: Expanded from assay table. 0.01 g/t gold is below against the open_pit mining band [5, 2, 1, 0.3] g/t. Grade×width 0.0 g/t·m is below.

Negative factors

  • 0.01 g/t gold is below the weak threshold (0.3 g/t) on the open_pit mining band.
  • Scored from rubric bands during table expansion, not from document context.

Evidence · table

“0.01”

Context: WND26_001

Tags used in scoring

QA/QC Disclosedpositive

Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).

Why it applies: qaqc_disclosed is true

Cut-off Undisclosednegative

High-grade interval reported without stating the cut-off grade used for compositing.

Why it applies: no cutoff_grade was stated

WND26_001Cloncurry · copperGrade: 0.01Grade Unit: %Intercept: 1 mView all details
Link to this fact

Identity

Hole ID
WND26_001
Project
Cloncurry
Commodity
copper
Region
australia_qld
Reported Region
australia_qld
Ticker
TNC

Geometry

Grade
0.01
Grade Unit
%
Intercept
1 m
From
176 m
To
177 m
Intercept Depth
176 m

Classification

Deposit Type
iocg
Sample Type
drill
Group ID
WND26_001:176-177
Mining Method
open_pit

Location

Location
Main Zone
CRS
MGA94 Zone 54
Loc. Source
document

QA/QC

Laboratory
ALS Brisbane
QA/QC Disclosed
Yes
QP Signed
Yes
QA/QC Methods
standards, blanks, duplicates

Metal Equivalent

Metal Eq. Grade
0.02
Metal Eq. Unit
% Cu-Eq
Assumptions Disclosed
Yes

Compositing

Dilution Disclosed
Yes

Review

Needs Review
No
Interp. Status
scored
Historical
No

Dates

Event date
2026-09-29T00:00:00.000Z

Reasoning: Expanded from assay table. 0.01 % copper is below against the iocg deposit band [0.9, 0.5, 0.3, 0.2] %. Grade×width 0.0 %·m is below.

Negative factors

  • 0.01 % copper is below the weak threshold (0.2 %) on the iocg deposit band.
  • Scored from rubric bands during table expansion, not from document context.

Evidence · table

“0.01”

Context: WND26_001

Tags used in scoring

QA/QC Disclosedpositive

Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).

Why it applies: qaqc_disclosed is true

Cut-off Undisclosednegative

High-grade interval reported without stating the cut-off grade used for compositing.

Why it applies: no cutoff_grade was stated

WND26_001Cloncurry · goldGrade: 0.01Grade Unit: g/tIntercept: 1 mView all details
Link to this fact

Identity

Hole ID
WND26_001
Project
Cloncurry
Commodity
gold
Region
australia_qld
Reported Region
australia_qld
Ticker
TNC

Geometry

Grade
0.01
Grade Unit
g/t
Intercept
1 m
From
176 m
To
177 m
Intercept Depth
176 m

Classification

Deposit Type
iocg
Sample Type
drill
Group ID
WND26_001:176-177
Mining Method
open_pit

Location

Location
Main Zone
CRS
MGA94 Zone 54
Loc. Source
document

QA/QC

Laboratory
ALS Brisbane
QA/QC Disclosed
Yes
QP Signed
Yes
QA/QC Methods
standards, blanks, duplicates

Metal Equivalent

Metal Eq. Grade
0.02
Metal Eq. Unit
% Cu-Eq
Assumptions Disclosed
Yes

Compositing

Dilution Disclosed
Yes

Review

Needs Review
No
Interp. Status
scored
Historical
No

Dates

Event date
2026-09-29T00:00:00.000Z

Reasoning: Expanded from assay table. 0.01 g/t gold is below against the open_pit mining band [5, 2, 1, 0.3] g/t. Grade×width 0.0 g/t·m is below.

Negative factors

  • 0.01 g/t gold is below the weak threshold (0.3 g/t) on the open_pit mining band.
  • Scored from rubric bands during table expansion, not from document context.

Evidence · table

“0.01”

Context: WND26_001

Tags used in scoring

QA/QC Disclosedpositive

Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).

Why it applies: qaqc_disclosed is true

Cut-off Undisclosednegative

High-grade interval reported without stating the cut-off grade used for compositing.

Why it applies: no cutoff_grade was stated

WND26_001Cloncurry · copperGrade: 0.01Grade Unit: %Intercept: 1 mView all details
Link to this fact

Identity

Hole ID
WND26_001
Project
Cloncurry
Commodity
copper
Region
australia_qld
Reported Region
australia_qld
Ticker
TNC

Geometry

Grade
0.01
Grade Unit
%
Intercept
1 m
From
177 m
To
178 m
Intercept Depth
177 m

Classification

Deposit Type
iocg
Sample Type
drill
Group ID
WND26_001:177-178
Mining Method
open_pit

Location

Location
Main Zone
CRS
MGA94 Zone 54
Loc. Source
document

QA/QC

Laboratory
ALS Brisbane
QA/QC Disclosed
Yes
QP Signed
Yes
QA/QC Methods
standards, blanks, duplicates

Metal Equivalent

Metal Eq. Grade
0.02
Metal Eq. Unit
% Cu-Eq
Assumptions Disclosed
Yes

Compositing

Dilution Disclosed
Yes

Review

Needs Review
No
Interp. Status
scored
Historical
No

Dates

Event date
2026-09-29T00:00:00.000Z

Reasoning: Expanded from assay table. 0.01 % copper is below against the iocg deposit band [0.9, 0.5, 0.3, 0.2] %. Grade×width 0.0 %·m is below.

Negative factors

  • 0.01 % copper is below the weak threshold (0.2 %) on the iocg deposit band.
  • Scored from rubric bands during table expansion, not from document context.

Evidence · table

“0.01”

Context: WND26_001

Tags used in scoring

QA/QC Disclosedpositive

Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).

Why it applies: qaqc_disclosed is true

Cut-off Undisclosednegative

High-grade interval reported without stating the cut-off grade used for compositing.

Why it applies: no cutoff_grade was stated

WND26_001Cloncurry · goldGrade: 0.01Grade Unit: g/tIntercept: 1 mView all details
Link to this fact

Identity

Hole ID
WND26_001
Project
Cloncurry
Commodity
gold
Region
australia_qld
Reported Region
australia_qld
Ticker
TNC

Geometry

Grade
0.01
Grade Unit
g/t
Intercept
1 m
From
177 m
To
178 m
Intercept Depth
177 m

Classification

Deposit Type
iocg
Sample Type
drill
Group ID
WND26_001:177-178
Mining Method
open_pit

Location

Location
Main Zone
CRS
MGA94 Zone 54
Loc. Source
document

QA/QC

Laboratory
ALS Brisbane
QA/QC Disclosed
Yes
QP Signed
Yes
QA/QC Methods
standards, blanks, duplicates

Metal Equivalent

Metal Eq. Grade
0.02
Metal Eq. Unit
% Cu-Eq
Assumptions Disclosed
Yes

Compositing

Dilution Disclosed
Yes

Review

Needs Review
No
Interp. Status
scored
Historical
No

Dates

Event date
2026-09-29T00:00:00.000Z

Reasoning: Expanded from assay table. 0.01 g/t gold is below against the open_pit mining band [5, 2, 1, 0.3] g/t. Grade×width 0.0 g/t·m is below.

Negative factors

  • 0.01 g/t gold is below the weak threshold (0.3 g/t) on the open_pit mining band.
  • Scored from rubric bands during table expansion, not from document context.

Evidence · table

“0.01”

Context: WND26_001

Tags used in scoring

QA/QC Disclosedpositive

Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).

Why it applies: qaqc_disclosed is true

Cut-off Undisclosednegative

High-grade interval reported without stating the cut-off grade used for compositing.

Why it applies: no cutoff_grade was stated

WND26_001Cloncurry · copperGrade: 0.01Grade Unit: %Intercept: 1 mView all details
Link to this fact

Identity

Hole ID
WND26_001
Project
Cloncurry
Commodity
copper
Region
australia_qld
Reported Region
australia_qld
Ticker
TNC

Geometry

Grade
0.01
Grade Unit
%
Intercept
1 m
From
178 m
To
179 m
Intercept Depth
178 m

Classification

Deposit Type
iocg
Sample Type
drill
Group ID
WND26_001:178-179
Mining Method
open_pit

Location

Location
Main Zone
CRS
MGA94 Zone 54
Loc. Source
document

QA/QC

Laboratory
ALS Brisbane
QA/QC Disclosed
Yes
QP Signed
Yes
QA/QC Methods
standards, blanks, duplicates

Metal Equivalent

Metal Eq. Grade
0.02
Metal Eq. Unit
% Cu-Eq
Assumptions Disclosed
Yes

Compositing

Dilution Disclosed
Yes

Review

Needs Review
No
Interp. Status
scored
Historical
No

Dates

Event date
2026-09-29T00:00:00.000Z

Reasoning: Expanded from assay table. 0.01 % copper is below against the iocg deposit band [0.9, 0.5, 0.3, 0.2] %. Grade×width 0.0 %·m is below.

Negative factors

  • 0.01 % copper is below the weak threshold (0.2 %) on the iocg deposit band.
  • Scored from rubric bands during table expansion, not from document context.

Evidence · table

“0.01”

Context: WND26_001

Tags used in scoring

QA/QC Disclosedpositive

Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).

Why it applies: qaqc_disclosed is true

Cut-off Undisclosednegative

High-grade interval reported without stating the cut-off grade used for compositing.

Why it applies: no cutoff_grade was stated

WND26_001Cloncurry · goldGrade: 0.01Grade Unit: g/tIntercept: 1 mView all details
Link to this fact

Identity

Hole ID
WND26_001
Project
Cloncurry
Commodity
gold
Region
australia_qld
Reported Region
australia_qld
Ticker
TNC

Geometry

Grade
0.01
Grade Unit
g/t
Intercept
1 m
From
178 m
To
179 m
Intercept Depth
178 m

Classification

Deposit Type
iocg
Sample Type
drill
Group ID
WND26_001:178-179
Mining Method
open_pit

Location

Location
Main Zone
CRS
MGA94 Zone 54
Loc. Source
document

QA/QC

Laboratory
ALS Brisbane
QA/QC Disclosed
Yes
QP Signed
Yes
QA/QC Methods
standards, blanks, duplicates

Metal Equivalent

Metal Eq. Grade
0.02
Metal Eq. Unit
% Cu-Eq
Assumptions Disclosed
Yes

Compositing

Dilution Disclosed
Yes

Review

Needs Review
No
Interp. Status
scored
Historical
No

Dates

Event date
2026-09-29T00:00:00.000Z

Reasoning: Expanded from assay table. 0.01 g/t gold is below against the open_pit mining band [5, 2, 1, 0.3] g/t. Grade×width 0.0 g/t·m is below.

Negative factors

  • 0.01 g/t gold is below the weak threshold (0.3 g/t) on the open_pit mining band.
  • Scored from rubric bands during table expansion, not from document context.

Evidence · table

“0.01”

Context: WND26_001

Tags used in scoring

QA/QC Disclosedpositive

Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).

Why it applies: qaqc_disclosed is true

Cut-off Undisclosednegative

High-grade interval reported without stating the cut-off grade used for compositing.

Why it applies: no cutoff_grade was stated

WND26_001Cloncurry · copperGrade: 0.01Grade Unit: %Intercept: 1 mView all details
Link to this fact

Identity

Hole ID
WND26_001
Project
Cloncurry
Commodity
copper
Region
australia_qld
Reported Region
australia_qld
Ticker
TNC

Geometry

Grade
0.01
Grade Unit
%
Intercept
1 m
From
179 m
To
180 m
Intercept Depth
179 m

Classification

Deposit Type
iocg
Sample Type
drill
Group ID
WND26_001:179-180
Mining Method
open_pit

Location

Location
Main Zone
CRS
MGA94 Zone 54
Loc. Source
document

QA/QC

Laboratory
ALS Brisbane
QA/QC Disclosed
Yes
QP Signed
Yes
QA/QC Methods
standards, blanks, duplicates

Metal Equivalent

Metal Eq. Grade
0.02
Metal Eq. Unit
% Cu-Eq
Assumptions Disclosed
Yes

Compositing

Dilution Disclosed
Yes

Review

Needs Review
No
Interp. Status
scored
Historical
No

Dates

Event date
2026-09-29T00:00:00.000Z

Reasoning: Expanded from assay table. 0.01 % copper is below against the iocg deposit band [0.9, 0.5, 0.3, 0.2] %. Grade×width 0.0 %·m is below.

Negative factors

  • 0.01 % copper is below the weak threshold (0.2 %) on the iocg deposit band.
  • Scored from rubric bands during table expansion, not from document context.

Evidence · table

“0.01”

Context: WND26_001

Tags used in scoring

QA/QC Disclosedpositive

Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).

Why it applies: qaqc_disclosed is true

Cut-off Undisclosednegative

High-grade interval reported without stating the cut-off grade used for compositing.

Why it applies: no cutoff_grade was stated

WND26_001Cloncurry · goldGrade: 0.01Grade Unit: g/tIntercept: 1 mView all details
Link to this fact

Identity

Hole ID
WND26_001
Project
Cloncurry
Commodity
gold
Region
australia_qld
Reported Region
australia_qld
Ticker
TNC

Geometry

Grade
0.01
Grade Unit
g/t
Intercept
1 m
From
179 m
To
180 m
Intercept Depth
179 m

Classification

Deposit Type
iocg
Sample Type
drill
Group ID
WND26_001:179-180
Mining Method
open_pit

Location

Location
Main Zone
CRS
MGA94 Zone 54
Loc. Source
document

QA/QC

Laboratory
ALS Brisbane
QA/QC Disclosed
Yes
QP Signed
Yes
QA/QC Methods
standards, blanks, duplicates

Metal Equivalent

Metal Eq. Grade
0.02
Metal Eq. Unit
% Cu-Eq
Assumptions Disclosed
Yes

Compositing

Dilution Disclosed
Yes

Review

Needs Review
No
Interp. Status
scored
Historical
No

Dates

Event date
2026-09-29T00:00:00.000Z

Reasoning: Expanded from assay table. 0.01 g/t gold is below against the open_pit mining band [5, 2, 1, 0.3] g/t. Grade×width 0.0 g/t·m is below.

Negative factors

  • 0.01 g/t gold is below the weak threshold (0.3 g/t) on the open_pit mining band.
  • Scored from rubric bands during table expansion, not from document context.

Evidence · table

“0.01”

Context: WND26_001

Tags used in scoring

QA/QC Disclosedpositive

Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).

Why it applies: qaqc_disclosed is true

Cut-off Undisclosednegative

High-grade interval reported without stating the cut-off grade used for compositing.

Why it applies: no cutoff_grade was stated

WND26_001Cloncurry · copperGrade: 0Grade Unit: %Intercept: 1 mView all details
Link to this fact

Identity

Hole ID
WND26_001
Project
Cloncurry
Commodity
copper
Region
australia_qld
Reported Region
australia_qld
Ticker
TNC

Geometry

Grade
0
Grade Unit
%
Intercept
1 m
From
180 m
To
181 m
Intercept Depth
180 m

Classification

Deposit Type
iocg
Sample Type
drill
Group ID
WND26_001:180-181
Mining Method
open_pit

Location

Location
Main Zone
CRS
MGA94 Zone 54
Loc. Source
document

QA/QC

Laboratory
ALS Brisbane
QA/QC Disclosed
Yes
QP Signed
Yes
QA/QC Methods
standards, blanks, duplicates

Metal Equivalent

Metal Eq. Grade
0.01
Metal Eq. Unit
% Cu-Eq
Assumptions Disclosed
Yes

Compositing

Dilution Disclosed
Yes

Review

Needs Review
No
Interp. Status
scored
Historical
No

Dates

Event date
2026-09-29T00:00:00.000Z

Reasoning: Expanded from assay table. 0 % copper is below against the iocg deposit band [0.9, 0.5, 0.3, 0.2] %. Grade×width 0.0 %·m is below.

Negative factors

  • 0 % copper is below the weak threshold (0.2 %) on the iocg deposit band.
  • Scored from rubric bands during table expansion, not from document context.

Evidence · table

“0.00”

Context: WND26_001

Tags used in scoring

QA/QC Disclosedpositive

Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).

Why it applies: qaqc_disclosed is true

Cut-off Undisclosednegative

High-grade interval reported without stating the cut-off grade used for compositing.

Why it applies: no cutoff_grade was stated

WND26_001Cloncurry · goldGrade: 0.01Grade Unit: g/tIntercept: 1 mView all details
Link to this fact

Identity

Hole ID
WND26_001
Project
Cloncurry
Commodity
gold
Region
australia_qld
Reported Region
australia_qld
Ticker
TNC

Geometry

Grade
0.01
Grade Unit
g/t
Intercept
1 m
From
180 m
To
181 m
Intercept Depth
180 m

Classification

Deposit Type
iocg
Sample Type
drill
Group ID
WND26_001:180-181
Mining Method
open_pit

Location

Location
Main Zone
CRS
MGA94 Zone 54
Loc. Source
document

QA/QC

Laboratory
ALS Brisbane
QA/QC Disclosed
Yes
QP Signed
Yes
QA/QC Methods
standards, blanks, duplicates

Metal Equivalent

Metal Eq. Grade
0.01
Metal Eq. Unit
% Cu-Eq
Assumptions Disclosed
Yes

Compositing

Dilution Disclosed
Yes

Review

Needs Review
No
Interp. Status
scored
Historical
No

Dates

Event date
2026-09-29T00:00:00.000Z

Reasoning: Expanded from assay table. 0.01 g/t gold is below against the open_pit mining band [5, 2, 1, 0.3] g/t. Grade×width 0.0 g/t·m is below.

Negative factors

  • 0.01 g/t gold is below the weak threshold (0.3 g/t) on the open_pit mining band.
  • Scored from rubric bands during table expansion, not from document context.

Evidence · table

“0.01”

Context: WND26_001

Tags used in scoring

QA/QC Disclosedpositive

Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).

Why it applies: qaqc_disclosed is true

Cut-off Undisclosednegative

High-grade interval reported without stating the cut-off grade used for compositing.

Why it applies: no cutoff_grade was stated

WND26_001Cloncurry · copperGrade: 0.01Grade Unit: %Intercept: 1 mView all details
Link to this fact

Identity

Hole ID
WND26_001
Project
Cloncurry
Commodity
copper
Region
australia_qld
Reported Region
australia_qld
Ticker
TNC

Geometry

Grade
0.01
Grade Unit
%
Intercept
1 m
From
181 m
To
182 m
Intercept Depth
181 m

Classification

Deposit Type
iocg
Sample Type
drill
Group ID
WND26_001:181-182
Mining Method
open_pit

Location

Location
Main Zone
CRS
MGA94 Zone 54
Loc. Source
document

QA/QC

Laboratory
ALS Brisbane
QA/QC Disclosed
Yes
QP Signed
Yes
QA/QC Methods
standards, blanks, duplicates

Metal Equivalent

Metal Eq. Grade
0.02
Metal Eq. Unit
% Cu-Eq
Assumptions Disclosed
Yes

Compositing

Dilution Disclosed
Yes

Review

Needs Review
No
Interp. Status
scored
Historical
No

Dates

Event date
2026-09-29T00:00:00.000Z

Reasoning: Expanded from assay table. 0.01 % copper is below against the iocg deposit band [0.9, 0.5, 0.3, 0.2] %. Grade×width 0.0 %·m is below.

Negative factors

  • 0.01 % copper is below the weak threshold (0.2 %) on the iocg deposit band.
  • Scored from rubric bands during table expansion, not from document context.

Evidence · table

“0.01”

Context: WND26_001

Tags used in scoring

QA/QC Disclosedpositive

Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).

Why it applies: qaqc_disclosed is true

Cut-off Undisclosednegative

High-grade interval reported without stating the cut-off grade used for compositing.

Why it applies: no cutoff_grade was stated

WND26_001Cloncurry · goldGrade: 0.01Grade Unit: g/tIntercept: 1 mView all details
Link to this fact

Identity

Hole ID
WND26_001
Project
Cloncurry
Commodity
gold
Region
australia_qld
Reported Region
australia_qld
Ticker
TNC

Geometry

Grade
0.01
Grade Unit
g/t
Intercept
1 m
From
181 m
To
182 m
Intercept Depth
181 m

Classification

Deposit Type
iocg
Sample Type
drill
Group ID
WND26_001:181-182
Mining Method
open_pit

Location

Location
Main Zone
CRS
MGA94 Zone 54
Loc. Source
document

QA/QC

Laboratory
ALS Brisbane
QA/QC Disclosed
Yes
QP Signed
Yes
QA/QC Methods
standards, blanks, duplicates

Metal Equivalent

Metal Eq. Grade
0.02
Metal Eq. Unit
% Cu-Eq
Assumptions Disclosed
Yes

Compositing

Dilution Disclosed
Yes

Review

Needs Review
No
Interp. Status
scored
Historical
No

Dates

Event date
2026-09-29T00:00:00.000Z

Reasoning: Expanded from assay table. 0.01 g/t gold is below against the open_pit mining band [5, 2, 1, 0.3] g/t. Grade×width 0.0 g/t·m is below.

Negative factors

  • 0.01 g/t gold is below the weak threshold (0.3 g/t) on the open_pit mining band.
  • Scored from rubric bands during table expansion, not from document context.

Evidence · table

“0.01”

Context: WND26_001

Tags used in scoring

QA/QC Disclosedpositive

Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).

Why it applies: qaqc_disclosed is true

Cut-off Undisclosednegative

High-grade interval reported without stating the cut-off grade used for compositing.

Why it applies: no cutoff_grade was stated

WND26_001Cloncurry · copperGrade: 0.01Grade Unit: %Intercept: 1 mView all details
Link to this fact

Identity

Hole ID
WND26_001
Project
Cloncurry
Commodity
copper
Region
australia_qld
Reported Region
australia_qld
Ticker
TNC

Geometry

Grade
0.01
Grade Unit
%
Intercept
1 m
From
182 m
To
183 m
Intercept Depth
182 m

Classification

Deposit Type
iocg
Sample Type
drill
Group ID
WND26_001:182-183
Mining Method
open_pit

Location

Location
Main Zone
CRS
MGA94 Zone 54
Loc. Source
document

QA/QC

Laboratory
ALS Brisbane
QA/QC Disclosed
Yes
QP Signed
Yes
QA/QC Methods
standards, blanks, duplicates

Metal Equivalent

Metal Eq. Grade
0.02
Metal Eq. Unit
% Cu-Eq
Assumptions Disclosed
Yes

Compositing

Dilution Disclosed
Yes

Review

Needs Review
No
Interp. Status
scored
Historical
No

Dates

Event date
2026-09-29T00:00:00.000Z

Reasoning: Expanded from assay table. 0.01 % copper is below against the iocg deposit band [0.9, 0.5, 0.3, 0.2] %. Grade×width 0.0 %·m is below.

Negative factors

  • 0.01 % copper is below the weak threshold (0.2 %) on the iocg deposit band.
  • Scored from rubric bands during table expansion, not from document context.

Evidence · table

“0.01”

Context: WND26_001

Tags used in scoring

QA/QC Disclosedpositive

Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).

Why it applies: qaqc_disclosed is true

Cut-off Undisclosednegative

High-grade interval reported without stating the cut-off grade used for compositing.

Why it applies: no cutoff_grade was stated

WND26_001Cloncurry · goldGrade: 0.01Grade Unit: g/tIntercept: 1 mView all details
Link to this fact

Identity

Hole ID
WND26_001
Project
Cloncurry
Commodity
gold
Region
australia_qld
Reported Region
australia_qld
Ticker
TNC

Geometry

Grade
0.01
Grade Unit
g/t
Intercept
1 m
From
182 m
To
183 m
Intercept Depth
182 m

Classification

Deposit Type
iocg
Sample Type
drill
Group ID
WND26_001:182-183
Mining Method
open_pit

Location

Location
Main Zone
CRS
MGA94 Zone 54
Loc. Source
document

QA/QC

Laboratory
ALS Brisbane
QA/QC Disclosed
Yes
QP Signed
Yes
QA/QC Methods
standards, blanks, duplicates

Metal Equivalent

Metal Eq. Grade
0.02
Metal Eq. Unit
% Cu-Eq
Assumptions Disclosed
Yes

Compositing

Dilution Disclosed
Yes

Review

Needs Review
No
Interp. Status
scored
Historical
No

Dates

Event date
2026-09-29T00:00:00.000Z

Reasoning: Expanded from assay table. 0.01 g/t gold is below against the open_pit mining band [5, 2, 1, 0.3] g/t. Grade×width 0.0 g/t·m is below.

Negative factors

  • 0.01 g/t gold is below the weak threshold (0.3 g/t) on the open_pit mining band.
  • Scored from rubric bands during table expansion, not from document context.

Evidence · table

“0.01”

Context: WND26_001

Tags used in scoring

QA/QC Disclosedpositive

Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).

Why it applies: qaqc_disclosed is true

Cut-off Undisclosednegative

High-grade interval reported without stating the cut-off grade used for compositing.

Why it applies: no cutoff_grade was stated

WND26_001Cloncurry · copperGrade: 0.01Grade Unit: %Intercept: 1 mView all details
Link to this fact

Identity

Hole ID
WND26_001
Project
Cloncurry
Commodity
copper
Region
australia_qld
Reported Region
australia_qld
Ticker
TNC

Geometry

Grade
0.01
Grade Unit
%
Intercept
1 m
From
183 m
To
184 m
Intercept Depth
183 m

Classification

Deposit Type
iocg
Sample Type
drill
Group ID
WND26_001:183-184
Mining Method
open_pit

Location

Location
Main Zone
CRS
MGA94 Zone 54
Loc. Source
document

QA/QC

Laboratory
ALS Brisbane
QA/QC Disclosed
Yes
QP Signed
Yes
QA/QC Methods
standards, blanks, duplicates

Metal Equivalent

Metal Eq. Grade
0.02
Metal Eq. Unit
% Cu-Eq
Assumptions Disclosed
Yes

Compositing

Dilution Disclosed
Yes

Review

Needs Review
No
Interp. Status
scored
Historical
No

Dates

Event date
2026-09-29T00:00:00.000Z

Reasoning: Expanded from assay table. 0.01 % copper is below against the iocg deposit band [0.9, 0.5, 0.3, 0.2] %. Grade×width 0.0 %·m is below.

Negative factors

  • 0.01 % copper is below the weak threshold (0.2 %) on the iocg deposit band.
  • Scored from rubric bands during table expansion, not from document context.

Evidence · table

“0.01”

Context: WND26_001

Tags used in scoring

QA/QC Disclosedpositive

Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).

Why it applies: qaqc_disclosed is true

Cut-off Undisclosednegative

High-grade interval reported without stating the cut-off grade used for compositing.

Why it applies: no cutoff_grade was stated

WND26_001Cloncurry · goldGrade: 0.01Grade Unit: g/tIntercept: 1 mView all details
Link to this fact

Identity

Hole ID
WND26_001
Project
Cloncurry
Commodity
gold
Region
australia_qld
Reported Region
australia_qld
Ticker
TNC

Geometry

Grade
0.01
Grade Unit
g/t
Intercept
1 m
From
183 m
To
184 m
Intercept Depth
183 m

Classification

Deposit Type
iocg
Sample Type
drill
Group ID
WND26_001:183-184
Mining Method
open_pit

Location

Location
Main Zone
CRS
MGA94 Zone 54
Loc. Source
document

QA/QC

Laboratory
ALS Brisbane
QA/QC Disclosed
Yes
QP Signed
Yes
QA/QC Methods
standards, blanks, duplicates

Metal Equivalent

Metal Eq. Grade
0.02
Metal Eq. Unit
% Cu-Eq
Assumptions Disclosed
Yes

Compositing

Dilution Disclosed
Yes

Review

Needs Review
No
Interp. Status
scored
Historical
No

Dates

Event date
2026-09-29T00:00:00.000Z

Reasoning: Expanded from assay table. 0.01 g/t gold is below against the open_pit mining band [5, 2, 1, 0.3] g/t. Grade×width 0.0 g/t·m is below.

Negative factors

  • 0.01 g/t gold is below the weak threshold (0.3 g/t) on the open_pit mining band.
  • Scored from rubric bands during table expansion, not from document context.

Evidence · table

“0.01”

Context: WND26_001

Tags used in scoring

QA/QC Disclosedpositive

Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).

Why it applies: qaqc_disclosed is true

Cut-off Undisclosednegative

High-grade interval reported without stating the cut-off grade used for compositing.

Why it applies: no cutoff_grade was stated

WND26_001Cloncurry · copperGrade: 0.01Grade Unit: %Intercept: 1 mView all details
Link to this fact

Identity

Hole ID
WND26_001
Project
Cloncurry
Commodity
copper
Region
australia_qld
Reported Region
australia_qld
Ticker
TNC

Geometry

Grade
0.01
Grade Unit
%
Intercept
1 m
From
184 m
To
185 m
Intercept Depth
184 m

Classification

Deposit Type
iocg
Sample Type
drill
Group ID
WND26_001:184-185
Mining Method
open_pit

Location

Location
Main Zone
CRS
MGA94 Zone 54
Loc. Source
document

QA/QC

Laboratory
ALS Brisbane
QA/QC Disclosed
Yes
QP Signed
Yes
QA/QC Methods
standards, blanks, duplicates

Metal Equivalent

Metal Eq. Grade
0.02
Metal Eq. Unit
% Cu-Eq
Assumptions Disclosed
Yes

Compositing

Dilution Disclosed
Yes

Review

Needs Review
No
Interp. Status
scored
Historical
No

Dates

Event date
2026-09-29T00:00:00.000Z

Reasoning: Expanded from assay table. 0.01 % copper is below against the iocg deposit band [0.9, 0.5, 0.3, 0.2] %. Grade×width 0.0 %·m is below.

Negative factors

  • 0.01 % copper is below the weak threshold (0.2 %) on the iocg deposit band.
  • Scored from rubric bands during table expansion, not from document context.

Evidence · table

“0.01”

Context: WND26_001

Tags used in scoring

QA/QC Disclosedpositive

Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).

Why it applies: qaqc_disclosed is true

Cut-off Undisclosednegative

High-grade interval reported without stating the cut-off grade used for compositing.

Why it applies: no cutoff_grade was stated

WND26_001Cloncurry · goldGrade: 0.01Grade Unit: g/tIntercept: 1 mView all details
Link to this fact

Identity

Hole ID
WND26_001
Project
Cloncurry
Commodity
gold
Region
australia_qld
Reported Region
australia_qld
Ticker
TNC

Geometry

Grade
0.01
Grade Unit
g/t
Intercept
1 m
From
184 m
To
185 m
Intercept Depth
184 m

Classification

Deposit Type
iocg
Sample Type
drill
Group ID
WND26_001:184-185
Mining Method
open_pit

Location

Location
Main Zone
CRS
MGA94 Zone 54
Loc. Source
document

QA/QC

Laboratory
ALS Brisbane
QA/QC Disclosed
Yes
QP Signed
Yes
QA/QC Methods
standards, blanks, duplicates

Metal Equivalent

Metal Eq. Grade
0.02
Metal Eq. Unit
% Cu-Eq
Assumptions Disclosed
Yes

Compositing

Dilution Disclosed
Yes

Review

Needs Review
No
Interp. Status
scored
Historical
No

Dates

Event date
2026-09-29T00:00:00.000Z

Reasoning: Expanded from assay table. 0.01 g/t gold is below against the open_pit mining band [5, 2, 1, 0.3] g/t. Grade×width 0.0 g/t·m is below.

Negative factors

  • 0.01 g/t gold is below the weak threshold (0.3 g/t) on the open_pit mining band.
  • Scored from rubric bands during table expansion, not from document context.

Evidence · table

“0.01”

Context: WND26_001

Tags used in scoring

QA/QC Disclosedpositive

Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).

Why it applies: qaqc_disclosed is true

Cut-off Undisclosednegative

High-grade interval reported without stating the cut-off grade used for compositing.

Why it applies: no cutoff_grade was stated

WND26_001Cloncurry · copperGrade: 0.15Grade Unit: %Intercept: 1 mView all details
Link to this fact

Identity

Hole ID
WND26_001
Project
Cloncurry
Commodity
copper
Region
australia_qld
Reported Region
australia_qld
Ticker
TNC

Geometry

Grade
0.15
Grade Unit
%
Intercept
1 m
From
185 m
To
186 m
Intercept Depth
185 m

Classification

Deposit Type
iocg
Sample Type
drill
Group ID
WND26_001:185-186
Mining Method
open_pit

Location

Location
Main Zone
CRS
MGA94 Zone 54
Loc. Source
document

QA/QC

Laboratory
ALS Brisbane
QA/QC Disclosed
Yes
QP Signed
Yes
QA/QC Methods
standards, blanks, duplicates

Metal Equivalent

Metal Eq. Grade
0.2
Metal Eq. Unit
% Cu-Eq
Assumptions Disclosed
Yes

Compositing

Dilution Disclosed
Yes

Review

Needs Review
No
Interp. Status
scored
Historical
No

Dates

Event date
2026-09-29T00:00:00.000Z

Reasoning: Expanded from assay table. 0.15 % copper is below against the iocg deposit band [0.9, 0.5, 0.3, 0.2] %. Grade×width 0.1 %·m is below.

Negative factors

  • 0.15 % copper is below the weak threshold (0.2 %) on the iocg deposit band.
  • Scored from rubric bands during table expansion, not from document context.

Evidence · table

“0.15”

Context: WND26_001

Tags used in scoring

QA/QC Disclosedpositive

Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).

Why it applies: qaqc_disclosed is true

Cut-off Undisclosednegative

High-grade interval reported without stating the cut-off grade used for compositing.

Why it applies: no cutoff_grade was stated

WND26_001Cloncurry · goldGrade: 0.05Grade Unit: g/tIntercept: 1 mView all details
Link to this fact

Identity

Hole ID
WND26_001
Project
Cloncurry
Commodity
gold
Region
australia_qld
Reported Region
australia_qld
Ticker
TNC

Geometry

Grade
0.05
Grade Unit
g/t
Intercept
1 m
From
185 m
To
186 m
Intercept Depth
185 m

Classification

Deposit Type
iocg
Sample Type
drill
Group ID
WND26_001:185-186
Mining Method
open_pit

Location

Location
Main Zone
CRS
MGA94 Zone 54
Loc. Source
document

QA/QC

Laboratory
ALS Brisbane
QA/QC Disclosed
Yes
QP Signed
Yes
QA/QC Methods
standards, blanks, duplicates

Metal Equivalent

Metal Eq. Grade
0.2
Metal Eq. Unit
% Cu-Eq
Assumptions Disclosed
Yes

Compositing

Dilution Disclosed
Yes

Review

Needs Review
No
Interp. Status
scored
Historical
No

Dates

Event date
2026-09-29T00:00:00.000Z

Reasoning: Expanded from assay table. 0.05 g/t gold is below against the open_pit mining band [5, 2, 1, 0.3] g/t. Grade×width 0.1 g/t·m is below.

Negative factors

  • 0.05 g/t gold is below the weak threshold (0.3 g/t) on the open_pit mining band.
  • Scored from rubric bands during table expansion, not from document context.

Evidence · table

“0.05”

Context: WND26_001

Tags used in scoring

QA/QC Disclosedpositive

Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).

Why it applies: qaqc_disclosed is true

Cut-off Undisclosednegative

High-grade interval reported without stating the cut-off grade used for compositing.

Why it applies: no cutoff_grade was stated

WND26_001Cloncurry · copperGrade: 0.12Grade Unit: %Intercept: 1 mView all details
Link to this fact

Identity

Hole ID
WND26_001
Project
Cloncurry
Commodity
copper
Region
australia_qld
Reported Region
australia_qld
Ticker
TNC

Geometry

Grade
0.12
Grade Unit
%
Intercept
1 m
From
186 m
To
187 m
Intercept Depth
186 m

Classification

Deposit Type
iocg
Sample Type
drill
Group ID
WND26_001:186-187
Mining Method
open_pit

Location

Location
Main Zone
CRS
MGA94 Zone 54
Loc. Source
document

QA/QC

Laboratory
ALS Brisbane
QA/QC Disclosed
Yes
QP Signed
Yes
QA/QC Methods
standards, blanks, duplicates

Metal Equivalent

Metal Eq. Grade
0.15
Metal Eq. Unit
% Cu-Eq
Assumptions Disclosed
Yes

Compositing

Dilution Disclosed
Yes

Review

Needs Review
No
Interp. Status
scored
Historical
No

Dates

Event date
2026-09-29T00:00:00.000Z

Reasoning: Expanded from assay table. 0.12 % copper is below against the iocg deposit band [0.9, 0.5, 0.3, 0.2] %. Grade×width 0.1 %·m is below.

Negative factors

  • 0.12 % copper is below the weak threshold (0.2 %) on the iocg deposit band.
  • Scored from rubric bands during table expansion, not from document context.

Evidence · table

“0.12”

Context: WND26_001

Tags used in scoring

QA/QC Disclosedpositive

Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).

Why it applies: qaqc_disclosed is true

Cut-off Undisclosednegative

High-grade interval reported without stating the cut-off grade used for compositing.

Why it applies: no cutoff_grade was stated

WND26_001Cloncurry · goldGrade: 0.03Grade Unit: g/tIntercept: 1 mView all details
Link to this fact

Identity

Hole ID
WND26_001
Project
Cloncurry
Commodity
gold
Region
australia_qld
Reported Region
australia_qld
Ticker
TNC

Geometry

Grade
0.03
Grade Unit
g/t
Intercept
1 m
From
186 m
To
187 m
Intercept Depth
186 m

Classification

Deposit Type
iocg
Sample Type
drill
Group ID
WND26_001:186-187
Mining Method
open_pit

Location

Location
Main Zone
CRS
MGA94 Zone 54
Loc. Source
document

QA/QC

Laboratory
ALS Brisbane
QA/QC Disclosed
Yes
QP Signed
Yes
QA/QC Methods
standards, blanks, duplicates

Metal Equivalent

Metal Eq. Grade
0.15
Metal Eq. Unit
% Cu-Eq
Assumptions Disclosed
Yes

Compositing

Dilution Disclosed
Yes

Review

Needs Review
No
Interp. Status
scored
Historical
No

Dates

Event date
2026-09-29T00:00:00.000Z

Reasoning: Expanded from assay table. 0.03 g/t gold is below against the open_pit mining band [5, 2, 1, 0.3] g/t. Grade×width 0.0 g/t·m is below.

Negative factors

  • 0.03 g/t gold is below the weak threshold (0.3 g/t) on the open_pit mining band.
  • Scored from rubric bands during table expansion, not from document context.

Evidence · table

“0.03”

Context: WND26_001

Tags used in scoring

QA/QC Disclosedpositive

Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).

Why it applies: qaqc_disclosed is true

Cut-off Undisclosednegative

High-grade interval reported without stating the cut-off grade used for compositing.

Why it applies: no cutoff_grade was stated

WND26_001Cloncurry · copperGrade: 0.03Grade Unit: %Intercept: 1 mView all details
Link to this fact

Identity

Hole ID
WND26_001
Project
Cloncurry
Commodity
copper
Region
australia_qld
Reported Region
australia_qld
Ticker
TNC

Geometry

Grade
0.03
Grade Unit
%
Intercept
1 m
From
187 m
To
188 m
Intercept Depth
187 m

Classification

Deposit Type
iocg
Sample Type
drill
Group ID
WND26_001:187-188
Mining Method
open_pit

Location

Location
Main Zone
CRS
MGA94 Zone 54
Loc. Source
document

QA/QC

Laboratory
ALS Brisbane
QA/QC Disclosed
Yes
QP Signed
Yes
QA/QC Methods
standards, blanks, duplicates

Metal Equivalent

Metal Eq. Grade
0.04
Metal Eq. Unit
% Cu-Eq
Assumptions Disclosed
Yes

Compositing

Dilution Disclosed
Yes

Review

Needs Review
No
Interp. Status
scored
Historical
No

Dates

Event date
2026-09-29T00:00:00.000Z

Reasoning: Expanded from assay table. 0.03 % copper is below against the iocg deposit band [0.9, 0.5, 0.3, 0.2] %. Grade×width 0.0 %·m is below.

Negative factors

  • 0.03 % copper is below the weak threshold (0.2 %) on the iocg deposit band.
  • Scored from rubric bands during table expansion, not from document context.

Evidence · table

“0.03”

Context: WND26_001

Tags used in scoring

QA/QC Disclosedpositive

Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).

Why it applies: qaqc_disclosed is true

Cut-off Undisclosednegative

High-grade interval reported without stating the cut-off grade used for compositing.

Why it applies: no cutoff_grade was stated

WND26_001Cloncurry · goldGrade: 0.01Grade Unit: g/tIntercept: 1 mView all details
Link to this fact

Identity

Hole ID
WND26_001
Project
Cloncurry
Commodity
gold
Region
australia_qld
Reported Region
australia_qld
Ticker
TNC

Geometry

Grade
0.01
Grade Unit
g/t
Intercept
1 m
From
187 m
To
188 m
Intercept Depth
187 m

Classification

Deposit Type
iocg
Sample Type
drill
Group ID
WND26_001:187-188
Mining Method
open_pit

Location

Location
Main Zone
CRS
MGA94 Zone 54
Loc. Source
document

QA/QC

Laboratory
ALS Brisbane
QA/QC Disclosed
Yes
QP Signed
Yes
QA/QC Methods
standards, blanks, duplicates

Metal Equivalent

Metal Eq. Grade
0.04
Metal Eq. Unit
% Cu-Eq
Assumptions Disclosed
Yes

Compositing

Dilution Disclosed
Yes

Review

Needs Review
No
Interp. Status
scored
Historical
No

Dates

Event date
2026-09-29T00:00:00.000Z

Reasoning: Expanded from assay table. 0.01 g/t gold is below against the open_pit mining band [5, 2, 1, 0.3] g/t. Grade×width 0.0 g/t·m is below.

Negative factors

  • 0.01 g/t gold is below the weak threshold (0.3 g/t) on the open_pit mining band.
  • Scored from rubric bands during table expansion, not from document context.

Evidence · table

“0.01”

Context: WND26_001

Tags used in scoring

QA/QC Disclosedpositive

Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).

Why it applies: qaqc_disclosed is true

Cut-off Undisclosednegative

High-grade interval reported without stating the cut-off grade used for compositing.

Why it applies: no cutoff_grade was stated

WND26_007Cloncurry · copperGrade: 1.58Grade Unit: %Intercept: 0.97 mView all details
Link to this fact

Identity

Hole ID
WND26_007
Project
Cloncurry
Commodity
copper
Region
australia_qld
Reported Region
australia_qld
Ticker
TNC

Geometry

Grade
1.58
Grade Unit
%
Intercept
0.97 m
From
88.03 m
To
89 m
Intercept Depth
88.03 m

Classification

Deposit Type
iocg
Sample Type
drill
Group ID
WND26_007:88.03-89
Mining Method
open_pit

Location

Location
Main Zone
CRS
MGA94 Zone 54
Loc. Source
document

QA/QC

Laboratory
ALS Brisbane
QA/QC Disclosed
Yes
QP Signed
Yes
QA/QC Methods
standards, blanks, duplicates

Metal Equivalent

Metal Eq. Grade
1.59
Metal Eq. Unit
% Cu-Eq
Assumptions Disclosed
Yes

Compositing

Dilution Disclosed
Yes

Review

Needs Review
No
Interp. Status
scored
Historical
No

Dates

Event date
2026-09-29T00:00:00.000Z

Reasoning: Expanded from assay table. 1.58 % copper is exceptional against the iocg deposit band [0.9, 0.5, 0.3, 0.2] %. Grade×width 1.5 %·m is below (grade alone is exceptional; the better of the two is used).

Positive factors

  • 1.58 % copper is exceptional on the iocg deposit band.

Negative factors

  • Scored from rubric bands during table expansion, not from document context.

Evidence · table

“1.58”

Context: WND26_007

Tags used in scoring

QA/QC Disclosedpositive

Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).

Why it applies: qaqc_disclosed is true

Cut-off Undisclosednegative

High-grade interval reported without stating the cut-off grade used for compositing.

Why it applies: no cutoff_grade was stated

WND26_007Cloncurry · goldGrade: 0.01Grade Unit: g/tIntercept: 0.97 mView all details
Link to this fact

Identity

Hole ID
WND26_007
Project
Cloncurry
Commodity
gold
Region
australia_qld
Reported Region
australia_qld
Ticker
TNC

Geometry

Grade
0.01
Grade Unit
g/t
Intercept
0.97 m
From
88.03 m
To
89 m
Intercept Depth
88.03 m

Classification

Deposit Type
iocg
Sample Type
drill
Group ID
WND26_007:88.03-89
Mining Method
open_pit

Location

Location
Main Zone
CRS
MGA94 Zone 54
Loc. Source
document

QA/QC

Laboratory
ALS Brisbane
QA/QC Disclosed
Yes
QP Signed
Yes
QA/QC Methods
standards, blanks, duplicates

Metal Equivalent

Metal Eq. Grade
1.59
Metal Eq. Unit
% Cu-Eq
Assumptions Disclosed
Yes

Compositing

Dilution Disclosed
Yes

Review

Needs Review
No
Interp. Status
scored
Historical
No

Dates

Event date
2026-09-29T00:00:00.000Z

Reasoning: Expanded from assay table. 0.01 g/t gold is below against the open_pit mining band [5, 2, 1, 0.3] g/t. Grade×width 0.0 g/t·m is below.

Negative factors

  • 0.01 g/t gold is below the weak threshold (0.3 g/t) on the open_pit mining band.
  • Scored from rubric bands during table expansion, not from document context.

Evidence · table

“0.01”

Context: WND26_007

Tags used in scoring

QA/QC Disclosedpositive

Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).

Why it applies: qaqc_disclosed is true

Cut-off Undisclosednegative

High-grade interval reported without stating the cut-off grade used for compositing.

Why it applies: no cutoff_grade was stated

WND26_007Cloncurry · copperGrade: 15.5Grade Unit: %Intercept: 0.8 mView all details
Link to this fact

Identity

Hole ID
WND26_007
Project
Cloncurry
Commodity
copper
Region
australia_qld
Reported Region
australia_qld
Ticker
TNC

Geometry

Grade
15.5
Grade Unit
%
Intercept
0.8 m
From
89 m
To
89.8 m
Intercept Depth
89 m

Classification

Deposit Type
iocg
Sample Type
drill
Group ID
WND26_007:89-89.8
Mining Method
open_pit

Location

Location
Main Zone
CRS
MGA94 Zone 54
Loc. Source
document

QA/QC

Laboratory
ALS Brisbane
QA/QC Disclosed
Yes
QP Signed
Yes
QA/QC Methods
standards, blanks, duplicates

Metal Equivalent

Metal Eq. Grade
15.93
Metal Eq. Unit
% Cu-Eq
Assumptions Disclosed
Yes

Compositing

Dilution Disclosed
Yes

Review

Needs Review
No
Interp. Status
scored
Historical
No

Dates

Event date
2026-09-29T00:00:00.000Z

Reasoning: Expanded from assay table. 15.5 % copper is exceptional against the iocg deposit band [0.9, 0.5, 0.3, 0.2] %. Grade×width 12.4 %·m is below (grade alone is exceptional; the better of the two is used).

Positive factors

  • 15.5 % copper is exceptional on the iocg deposit band.

Negative factors

  • Scored from rubric bands during table expansion, not from document context.

Evidence · table

“15.50”

Context: WND26_007

Tags used in scoring

QA/QC Disclosedpositive

Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).

Why it applies: qaqc_disclosed is true

Cut-off Undisclosednegative

High-grade interval reported without stating the cut-off grade used for compositing.

Why it applies: no cutoff_grade was stated

WND26_007Cloncurry · goldGrade: 0.42Grade Unit: g/tIntercept: 0.8 mView all details
Link to this fact

Identity

Hole ID
WND26_007
Project
Cloncurry
Commodity
gold
Region
australia_qld
Reported Region
australia_qld
Ticker
TNC

Geometry

Grade
0.42
Grade Unit
g/t
Intercept
0.8 m
From
89 m
To
89.8 m
Intercept Depth
89 m

Classification

Deposit Type
iocg
Sample Type
drill
Group ID
WND26_007:89-89.8
Mining Method
open_pit

Location

Location
Main Zone
CRS
MGA94 Zone 54
Loc. Source
document

QA/QC

Laboratory
ALS Brisbane
QA/QC Disclosed
Yes
QP Signed
Yes
QA/QC Methods
standards, blanks, duplicates

Metal Equivalent

Metal Eq. Grade
15.93
Metal Eq. Unit
% Cu-Eq
Assumptions Disclosed
Yes

Compositing

Dilution Disclosed
Yes

Review

Needs Review
No
Interp. Status
scored
Historical
No

Dates

Event date
2026-09-29T00:00:00.000Z

Reasoning: Expanded from assay table. 0.42 g/t gold is weak against the open_pit mining band [5, 2, 1, 0.3] g/t. Grade×width 0.3 g/t·m is below (grade alone is weak; the better of the two is used).

Negative factors

  • Scored from rubric bands during table expansion, not from document context.

Evidence · table

“0.42”

Context: WND26_007

Tags used in scoring

QA/QC Disclosedpositive

Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).

Why it applies: qaqc_disclosed is true

Cut-off Undisclosednegative

High-grade interval reported without stating the cut-off grade used for compositing.

Why it applies: no cutoff_grade was stated

WND26_007Cloncurry · copperGrade: 7.9Grade Unit: %Intercept: 1.24 mView all details
Link to this fact

Identity

Hole ID
WND26_007
Project
Cloncurry
Commodity
copper
Region
australia_qld
Reported Region
australia_qld
Ticker
TNC

Geometry

Grade
7.9
Grade Unit
%
Intercept
1.24 m
From
89.8 m
To
91.04 m
Intercept Depth
89.8 m

Classification

Deposit Type
iocg
Sample Type
drill
Group ID
WND26_007:89.8-91.04
Mining Method
open_pit

Location

Location
Main Zone
CRS
MGA94 Zone 54
Loc. Source
document

QA/QC

Laboratory
ALS Brisbane
QA/QC Disclosed
Yes
QP Signed
Yes
QA/QC Methods
standards, blanks, duplicates

Metal Equivalent

Metal Eq. Grade
8.04
Metal Eq. Unit
% Cu-Eq
Assumptions Disclosed
Yes

Compositing

Dilution Disclosed
Yes

Review

Needs Review
No
Interp. Status
scored
Historical
No

Dates

Event date
2026-09-29T00:00:00.000Z

Reasoning: Expanded from assay table. 7.9 % copper is exceptional against the iocg deposit band [0.9, 0.5, 0.3, 0.2] %. Grade×width 9.8 %·m is below (grade alone is exceptional; the better of the two is used).

Positive factors

  • 7.9 % copper is exceptional on the iocg deposit band.

Negative factors

  • Scored from rubric bands during table expansion, not from document context.

Evidence · table

“7.90”

Context: WND26_007

Tags used in scoring

QA/QC Disclosedpositive

Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).

Why it applies: qaqc_disclosed is true

Cut-off Undisclosednegative

High-grade interval reported without stating the cut-off grade used for compositing.

Why it applies: no cutoff_grade was stated

WND26_007Cloncurry · goldGrade: 0.14Grade Unit: g/tIntercept: 1.24 mView all details
Link to this fact

Identity

Hole ID
WND26_007
Project
Cloncurry
Commodity
gold
Region
australia_qld
Reported Region
australia_qld
Ticker
TNC

Geometry

Grade
0.14
Grade Unit
g/t
Intercept
1.24 m
From
89.8 m
To
91.04 m
Intercept Depth
89.8 m

Classification

Deposit Type
iocg
Sample Type
drill
Group ID
WND26_007:89.8-91.04
Mining Method
open_pit

Location

Location
Main Zone
CRS
MGA94 Zone 54
Loc. Source
document

QA/QC

Laboratory
ALS Brisbane
QA/QC Disclosed
Yes
QP Signed
Yes
QA/QC Methods
standards, blanks, duplicates

Metal Equivalent

Metal Eq. Grade
8.04
Metal Eq. Unit
% Cu-Eq
Assumptions Disclosed
Yes

Compositing

Dilution Disclosed
Yes

Review

Needs Review
No
Interp. Status
scored
Historical
No

Dates

Event date
2026-09-29T00:00:00.000Z

Reasoning: Expanded from assay table. 0.14 g/t gold is below against the open_pit mining band [5, 2, 1, 0.3] g/t. Grade×width 0.2 g/t·m is below.

Negative factors

  • 0.14 g/t gold is below the weak threshold (0.3 g/t) on the open_pit mining band.
  • Scored from rubric bands during table expansion, not from document context.

Evidence · table

“0.14”

Context: WND26_007

Tags used in scoring

QA/QC Disclosedpositive

Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).

Why it applies: qaqc_disclosed is true

Cut-off Undisclosednegative

High-grade interval reported without stating the cut-off grade used for compositing.

Why it applies: no cutoff_grade was stated

WND26_007Cloncurry · copperGrade: 2.71Grade Unit: %Intercept: 0.96 mView all details
Link to this fact

Identity

Hole ID
WND26_007
Project
Cloncurry
Commodity
copper
Region
australia_qld
Reported Region
australia_qld
Ticker
TNC

Geometry

Grade
2.71
Grade Unit
%
Intercept
0.96 m
From
91.04 m
To
92 m
Intercept Depth
91.04 m

Classification

Deposit Type
iocg
Sample Type
drill
Group ID
WND26_007:91.04-92
Mining Method
open_pit

Location

Location
Main Zone
CRS
MGA94 Zone 54
Loc. Source
document

QA/QC

Laboratory
ALS Brisbane
QA/QC Disclosed
Yes
QP Signed
Yes
QA/QC Methods
standards, blanks, duplicates

Metal Equivalent

Metal Eq. Grade
3.39
Metal Eq. Unit
% Cu-Eq
Assumptions Disclosed
Yes

Compositing

Dilution Disclosed
Yes

Review

Needs Review
No
Interp. Status
scored
Historical
No

Dates

Event date
2026-09-29T00:00:00.000Z

Reasoning: Expanded from assay table. 2.71 % copper is exceptional against the iocg deposit band [0.9, 0.5, 0.3, 0.2] %. Grade×width 2.6 %·m is below (grade alone is exceptional; the better of the two is used).

Positive factors

  • 2.71 % copper is exceptional on the iocg deposit band.

Negative factors

  • Scored from rubric bands during table expansion, not from document context.

Evidence · table

“2.71”

Context: WND26_007

Tags used in scoring

QA/QC Disclosedpositive

Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).

Why it applies: qaqc_disclosed is true

Cut-off Undisclosednegative

High-grade interval reported without stating the cut-off grade used for compositing.

Why it applies: no cutoff_grade was stated

WND26_007Cloncurry · goldGrade: 0.67Grade Unit: g/tIntercept: 0.96 mView all details
Link to this fact

Identity

Hole ID
WND26_007
Project
Cloncurry
Commodity
gold
Region
australia_qld
Reported Region
australia_qld
Ticker
TNC

Geometry

Grade
0.67
Grade Unit
g/t
Intercept
0.96 m
From
91.04 m
To
92 m
Intercept Depth
91.04 m

Classification

Deposit Type
iocg
Sample Type
drill
Group ID
WND26_007:91.04-92
Mining Method
open_pit

Location

Location
Main Zone
CRS
MGA94 Zone 54
Loc. Source
document

QA/QC

Laboratory
ALS Brisbane
QA/QC Disclosed
Yes
QP Signed
Yes
QA/QC Methods
standards, blanks, duplicates

Metal Equivalent

Metal Eq. Grade
3.39
Metal Eq. Unit
% Cu-Eq
Assumptions Disclosed
Yes

Compositing

Dilution Disclosed
Yes

Review

Needs Review
No
Interp. Status
scored
Historical
No

Dates

Event date
2026-09-29T00:00:00.000Z

Reasoning: Expanded from assay table. 0.67 g/t gold is weak against the open_pit mining band [5, 2, 1, 0.3] g/t. Grade×width 0.6 g/t·m is below (grade alone is weak; the better of the two is used).

Negative factors

  • Scored from rubric bands during table expansion, not from document context.

Evidence · table

“0.67”

Context: WND26_007

Tags used in scoring

QA/QC Disclosedpositive

Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).

Why it applies: qaqc_disclosed is true

Cut-off Undisclosednegative

High-grade interval reported without stating the cut-off grade used for compositing.

Why it applies: no cutoff_grade was stated

WND26_007Cloncurry · copperGrade: 0.03Grade Unit: %Intercept: 1.04 mView all details
Link to this fact

Identity

Hole ID
WND26_007
Project
Cloncurry
Commodity
copper
Region
australia_qld
Reported Region
australia_qld
Ticker
TNC

Geometry

Grade
0.03
Grade Unit
%
Intercept
1.04 m
From
92 m
To
93.04 m
Intercept Depth
92 m

Classification

Deposit Type
iocg
Sample Type
drill
Group ID
WND26_007:92-93.04
Mining Method
open_pit

Location

Location
Main Zone
CRS
MGA94 Zone 54
Loc. Source
document

QA/QC

Laboratory
ALS Brisbane
QA/QC Disclosed
Yes
QP Signed
Yes
QA/QC Methods
standards, blanks, duplicates

Metal Equivalent

Metal Eq. Grade
0.04
Metal Eq. Unit
% Cu-Eq
Assumptions Disclosed
Yes

Compositing

Dilution Disclosed
Yes

Review

Needs Review
No
Interp. Status
scored
Historical
No

Dates

Event date
2026-09-29T00:00:00.000Z

Reasoning: Expanded from assay table. 0.03 % copper is below against the iocg deposit band [0.9, 0.5, 0.3, 0.2] %. Grade×width 0.0 %·m is below.

Negative factors

  • 0.03 % copper is below the weak threshold (0.2 %) on the iocg deposit band.
  • Scored from rubric bands during table expansion, not from document context.

Evidence · table

“0.03”

Context: WND26_007

Tags used in scoring

QA/QC Disclosedpositive

Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).

Why it applies: qaqc_disclosed is true

Cut-off Undisclosednegative

High-grade interval reported without stating the cut-off grade used for compositing.

Why it applies: no cutoff_grade was stated

WND26_007Cloncurry · goldGrade: 0.01Grade Unit: g/tIntercept: 1.04 mView all details
Link to this fact

Identity

Hole ID
WND26_007
Project
Cloncurry
Commodity
gold
Region
australia_qld
Reported Region
australia_qld
Ticker
TNC

Geometry

Grade
0.01
Grade Unit
g/t
Intercept
1.04 m
From
92 m
To
93.04 m
Intercept Depth
92 m

Classification

Deposit Type
iocg
Sample Type
drill
Group ID
WND26_007:92-93.04
Mining Method
open_pit

Location

Location
Main Zone
CRS
MGA94 Zone 54
Loc. Source
document

QA/QC

Laboratory
ALS Brisbane
QA/QC Disclosed
Yes
QP Signed
Yes
QA/QC Methods
standards, blanks, duplicates

Metal Equivalent

Metal Eq. Grade
0.04
Metal Eq. Unit
% Cu-Eq
Assumptions Disclosed
Yes

Compositing

Dilution Disclosed
Yes

Review

Needs Review
No
Interp. Status
scored
Historical
No

Dates

Event date
2026-09-29T00:00:00.000Z

Reasoning: Expanded from assay table. 0.01 g/t gold is below against the open_pit mining band [5, 2, 1, 0.3] g/t. Grade×width 0.0 g/t·m is below.

Negative factors

  • 0.01 g/t gold is below the weak threshold (0.3 g/t) on the open_pit mining band.
  • Scored from rubric bands during table expansion, not from document context.

Evidence · table

“0.01”

Context: WND26_007

Tags used in scoring

QA/QC Disclosedpositive

Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).

Why it applies: qaqc_disclosed is true

Cut-off Undisclosednegative

High-grade interval reported without stating the cut-off grade used for compositing.

Why it applies: no cutoff_grade was stated

WND26_007Cloncurry · copperGrade: 0.03Grade Unit: %Intercept: 1.01 mView all details
Link to this fact

Identity

Hole ID
WND26_007
Project
Cloncurry
Commodity
copper
Region
australia_qld
Reported Region
australia_qld
Ticker
TNC

Geometry

Grade
0.03
Grade Unit
%
Intercept
1.01 m
From
93.04 m
To
94.05 m
Intercept Depth
93.04 m

Classification

Deposit Type
iocg
Sample Type
drill
Group ID
WND26_007:93.04-94.05
Mining Method
open_pit

Location

Location
Main Zone
CRS
MGA94 Zone 54
Loc. Source
document

QA/QC

Laboratory
ALS Brisbane
QA/QC Disclosed
Yes
QP Signed
Yes
QA/QC Methods
standards, blanks, duplicates

Metal Equivalent

Metal Eq. Grade
0.04
Metal Eq. Unit
% Cu-Eq
Assumptions Disclosed
Yes

Compositing

Dilution Disclosed
Yes

Review

Needs Review
No
Interp. Status
scored
Historical
No

Dates

Event date
2026-09-29T00:00:00.000Z

Reasoning: Expanded from assay table. 0.03 % copper is below against the iocg deposit band [0.9, 0.5, 0.3, 0.2] %. Grade×width 0.0 %·m is below.

Negative factors

  • 0.03 % copper is below the weak threshold (0.2 %) on the iocg deposit band.
  • Scored from rubric bands during table expansion, not from document context.

Evidence · table

“0.03”

Context: WND26_007

Tags used in scoring

QA/QC Disclosedpositive

Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).

Why it applies: qaqc_disclosed is true

Cut-off Undisclosednegative

High-grade interval reported without stating the cut-off grade used for compositing.

Why it applies: no cutoff_grade was stated

WND26_007Cloncurry · goldGrade: 0.01Grade Unit: g/tIntercept: 1.01 mView all details
Link to this fact

Identity

Hole ID
WND26_007
Project
Cloncurry
Commodity
gold
Region
australia_qld
Reported Region
australia_qld
Ticker
TNC

Geometry

Grade
0.01
Grade Unit
g/t
Intercept
1.01 m
From
93.04 m
To
94.05 m
Intercept Depth
93.04 m

Classification

Deposit Type
iocg
Sample Type
drill
Group ID
WND26_007:93.04-94.05
Mining Method
open_pit

Location

Location
Main Zone
CRS
MGA94 Zone 54
Loc. Source
document

QA/QC

Laboratory
ALS Brisbane
QA/QC Disclosed
Yes
QP Signed
Yes
QA/QC Methods
standards, blanks, duplicates

Metal Equivalent

Metal Eq. Grade
0.04
Metal Eq. Unit
% Cu-Eq
Assumptions Disclosed
Yes

Compositing

Dilution Disclosed
Yes

Review

Needs Review
No
Interp. Status
scored
Historical
No

Dates

Event date
2026-09-29T00:00:00.000Z

Reasoning: Expanded from assay table. 0.01 g/t gold is below against the open_pit mining band [5, 2, 1, 0.3] g/t. Grade×width 0.0 g/t·m is below.

Negative factors

  • 0.01 g/t gold is below the weak threshold (0.3 g/t) on the open_pit mining band.
  • Scored from rubric bands during table expansion, not from document context.

Evidence · table

“0.01”

Context: WND26_007

Tags used in scoring

QA/QC Disclosedpositive

Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).

Why it applies: qaqc_disclosed is true

Cut-off Undisclosednegative

High-grade interval reported without stating the cut-off grade used for compositing.

Why it applies: no cutoff_grade was stated

WND26_007Cloncurry · copperGrade: 0.03Grade Unit: %Intercept: 0.98 mView all details
Link to this fact

Identity

Hole ID
WND26_007
Project
Cloncurry
Commodity
copper
Region
australia_qld
Reported Region
australia_qld
Ticker
TNC

Geometry

Grade
0.03
Grade Unit
%
Intercept
0.98 m
From
94.05 m
To
95.03 m
Intercept Depth
94.05 m

Classification

Deposit Type
iocg
Sample Type
drill
Group ID
WND26_007:94.05-95.03
Mining Method
open_pit

Location

Location
Main Zone
CRS
MGA94 Zone 54
Loc. Source
document

QA/QC

Laboratory
ALS Brisbane
QA/QC Disclosed
Yes
QP Signed
Yes
QA/QC Methods
standards, blanks, duplicates

Metal Equivalent

Metal Eq. Grade
0.04
Metal Eq. Unit
% Cu-Eq
Assumptions Disclosed
Yes

Compositing

Dilution Disclosed
Yes

Review

Needs Review
No
Interp. Status
scored
Historical
No

Dates

Event date
2026-09-29T00:00:00.000Z

Reasoning: Expanded from assay table. 0.03 % copper is below against the iocg deposit band [0.9, 0.5, 0.3, 0.2] %. Grade×width 0.0 %·m is below.

Negative factors

  • 0.03 % copper is below the weak threshold (0.2 %) on the iocg deposit band.
  • Scored from rubric bands during table expansion, not from document context.

Evidence · table

“0.03”

Context: WND26_007

Tags used in scoring

QA/QC Disclosedpositive

Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).

Why it applies: qaqc_disclosed is true

Cut-off Undisclosednegative

High-grade interval reported without stating the cut-off grade used for compositing.

Why it applies: no cutoff_grade was stated

WND26_007Cloncurry · goldGrade: 0.01Grade Unit: g/tIntercept: 0.98 mView all details
Link to this fact

Identity

Hole ID
WND26_007
Project
Cloncurry
Commodity
gold
Region
australia_qld
Reported Region
australia_qld
Ticker
TNC

Geometry

Grade
0.01
Grade Unit
g/t
Intercept
0.98 m
From
94.05 m
To
95.03 m
Intercept Depth
94.05 m

Classification

Deposit Type
iocg
Sample Type
drill
Group ID
WND26_007:94.05-95.03
Mining Method
open_pit

Location

Location
Main Zone
CRS
MGA94 Zone 54
Loc. Source
document

QA/QC

Laboratory
ALS Brisbane
QA/QC Disclosed
Yes
QP Signed
Yes
QA/QC Methods
standards, blanks, duplicates

Metal Equivalent

Metal Eq. Grade
0.04
Metal Eq. Unit
% Cu-Eq
Assumptions Disclosed
Yes

Compositing

Dilution Disclosed
Yes

Review

Needs Review
No
Interp. Status
scored
Historical
No

Dates

Event date
2026-09-29T00:00:00.000Z

Reasoning: Expanded from assay table. 0.01 g/t gold is below against the open_pit mining band [5, 2, 1, 0.3] g/t. Grade×width 0.0 g/t·m is below.

Negative factors

  • 0.01 g/t gold is below the weak threshold (0.3 g/t) on the open_pit mining band.
  • Scored from rubric bands during table expansion, not from document context.

Evidence · table

“0.01”

Context: WND26_007

Tags used in scoring

QA/QC Disclosedpositive

Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).

Why it applies: qaqc_disclosed is true

Cut-off Undisclosednegative

High-grade interval reported without stating the cut-off grade used for compositing.

Why it applies: no cutoff_grade was stated

WND26_007Cloncurry · copperGrade: 0.01Grade Unit: %Intercept: 0.95 mView all details
Link to this fact

Identity

Hole ID
WND26_007
Project
Cloncurry
Commodity
copper
Region
australia_qld
Reported Region
australia_qld
Ticker
TNC

Geometry

Grade
0.01
Grade Unit
%
Intercept
0.95 m
From
95.03 m
To
95.98 m
Intercept Depth
95.03 m

Classification

Deposit Type
iocg
Sample Type
drill
Group ID
WND26_007:95.03-95.98
Mining Method
open_pit

Location

Location
Main Zone
CRS
MGA94 Zone 54
Loc. Source
document

QA/QC

Laboratory
ALS Brisbane
QA/QC Disclosed
Yes
QP Signed
Yes
QA/QC Methods
standards, blanks, duplicates

Metal Equivalent

Metal Eq. Grade
0.02
Metal Eq. Unit
% Cu-Eq
Assumptions Disclosed
Yes

Compositing

Dilution Disclosed
Yes

Review

Needs Review
No
Interp. Status
scored
Historical
No

Dates

Event date
2026-09-29T00:00:00.000Z

Reasoning: Expanded from assay table. 0.01 % copper is below against the iocg deposit band [0.9, 0.5, 0.3, 0.2] %. Grade×width 0.0 %·m is below.

Negative factors

  • 0.01 % copper is below the weak threshold (0.2 %) on the iocg deposit band.
  • Scored from rubric bands during table expansion, not from document context.

Evidence · table

“0.01”

Context: WND26_007

Tags used in scoring

QA/QC Disclosedpositive

Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).

Why it applies: qaqc_disclosed is true

Cut-off Undisclosednegative

High-grade interval reported without stating the cut-off grade used for compositing.

Why it applies: no cutoff_grade was stated

WND26_007Cloncurry · goldGrade: 0.01Grade Unit: g/tIntercept: 0.95 mView all details
Link to this fact

Identity

Hole ID
WND26_007
Project
Cloncurry
Commodity
gold
Region
australia_qld
Reported Region
australia_qld
Ticker
TNC

Geometry

Grade
0.01
Grade Unit
g/t
Intercept
0.95 m
From
95.03 m
To
95.98 m
Intercept Depth
95.03 m

Classification

Deposit Type
iocg
Sample Type
drill
Group ID
WND26_007:95.03-95.98
Mining Method
open_pit

Location

Location
Main Zone
CRS
MGA94 Zone 54
Loc. Source
document

QA/QC

Laboratory
ALS Brisbane
QA/QC Disclosed
Yes
QP Signed
Yes
QA/QC Methods
standards, blanks, duplicates

Metal Equivalent

Metal Eq. Grade
0.02
Metal Eq. Unit
% Cu-Eq
Assumptions Disclosed
Yes

Compositing

Dilution Disclosed
Yes

Review

Needs Review
No
Interp. Status
scored
Historical
No

Dates

Event date
2026-09-29T00:00:00.000Z

Reasoning: Expanded from assay table. 0.01 g/t gold is below against the open_pit mining band [5, 2, 1, 0.3] g/t. Grade×width 0.0 g/t·m is below.

Negative factors

  • 0.01 g/t gold is below the weak threshold (0.3 g/t) on the open_pit mining band.
  • Scored from rubric bands during table expansion, not from document context.

Evidence · table

“0.01”

Context: WND26_007

Tags used in scoring

QA/QC Disclosedpositive

Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).

Why it applies: qaqc_disclosed is true

Cut-off Undisclosednegative

High-grade interval reported without stating the cut-off grade used for compositing.

Why it applies: no cutoff_grade was stated

WND26_007Cloncurry · copperGrade: 0.03Grade Unit: %Intercept: 1 mView all details
Link to this fact

Identity

Hole ID
WND26_007
Project
Cloncurry
Commodity
copper
Region
australia_qld
Reported Region
australia_qld
Ticker
TNC

Geometry

Grade
0.03
Grade Unit
%
Intercept
1 m
From
95.98 m
To
96.98 m
Intercept Depth
95.98 m

Classification

Deposit Type
iocg
Sample Type
drill
Group ID
WND26_007:95.98-96.98
Mining Method
open_pit

Location

Location
Main Zone
CRS
MGA94 Zone 54
Loc. Source
document

QA/QC

Laboratory
ALS Brisbane
QA/QC Disclosed
Yes
QP Signed
Yes
QA/QC Methods
standards, blanks, duplicates

Metal Equivalent

Metal Eq. Grade
0.04
Metal Eq. Unit
% Cu-Eq
Assumptions Disclosed
Yes

Compositing

Dilution Disclosed
Yes

Review

Needs Review
No
Interp. Status
scored
Historical
No

Dates

Event date
2026-09-29T00:00:00.000Z

Reasoning: Expanded from assay table. 0.03 % copper is below against the iocg deposit band [0.9, 0.5, 0.3, 0.2] %. Grade×width 0.0 %·m is below.

Negative factors

  • 0.03 % copper is below the weak threshold (0.2 %) on the iocg deposit band.
  • Scored from rubric bands during table expansion, not from document context.

Evidence · table

“0.03”

Context: WND26_007

Tags used in scoring

QA/QC Disclosedpositive

Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).

Why it applies: qaqc_disclosed is true

Cut-off Undisclosednegative

High-grade interval reported without stating the cut-off grade used for compositing.

Why it applies: no cutoff_grade was stated

WND26_007Cloncurry · goldGrade: 0.01Grade Unit: g/tIntercept: 1 mView all details
Link to this fact

Identity

Hole ID
WND26_007
Project
Cloncurry
Commodity
gold
Region
australia_qld
Reported Region
australia_qld
Ticker
TNC

Geometry

Grade
0.01
Grade Unit
g/t
Intercept
1 m
From
95.98 m
To
96.98 m
Intercept Depth
95.98 m

Classification

Deposit Type
iocg
Sample Type
drill
Group ID
WND26_007:95.98-96.98
Mining Method
open_pit

Location

Location
Main Zone
CRS
MGA94 Zone 54
Loc. Source
document

QA/QC

Laboratory
ALS Brisbane
QA/QC Disclosed
Yes
QP Signed
Yes
QA/QC Methods
standards, blanks, duplicates

Metal Equivalent

Metal Eq. Grade
0.04
Metal Eq. Unit
% Cu-Eq
Assumptions Disclosed
Yes

Compositing

Dilution Disclosed
Yes

Review

Needs Review
No
Interp. Status
scored
Historical
No

Dates

Event date
2026-09-29T00:00:00.000Z

Reasoning: Expanded from assay table. 0.01 g/t gold is below against the open_pit mining band [5, 2, 1, 0.3] g/t. Grade×width 0.0 g/t·m is below.

Negative factors

  • 0.01 g/t gold is below the weak threshold (0.3 g/t) on the open_pit mining band.
  • Scored from rubric bands during table expansion, not from document context.

Evidence · table

“0.01”

Context: WND26_007

Tags used in scoring

QA/QC Disclosedpositive

Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).

Why it applies: qaqc_disclosed is true

Cut-off Undisclosednegative

High-grade interval reported without stating the cut-off grade used for compositing.

Why it applies: no cutoff_grade was stated

WND26_007Cloncurry · copperGrade: 0Grade Unit: %Intercept: 1.09 mView all details
Link to this fact

Identity

Hole ID
WND26_007
Project
Cloncurry
Commodity
copper
Region
australia_qld
Reported Region
australia_qld
Ticker
TNC

Geometry

Grade
0
Grade Unit
%
Intercept
1.09 m
From
96.98 m
To
98.07 m
Intercept Depth
96.98 m

Classification

Deposit Type
iocg
Sample Type
drill
Group ID
WND26_007:96.98-98.07
Mining Method
open_pit

Location

Location
Main Zone
CRS
MGA94 Zone 54
Loc. Source
document

QA/QC

Laboratory
ALS Brisbane
QA/QC Disclosed
Yes
QP Signed
Yes
QA/QC Methods
standards, blanks, duplicates

Metal Equivalent

Metal Eq. Grade
0.01
Metal Eq. Unit
% Cu-Eq
Assumptions Disclosed
Yes

Compositing

Dilution Disclosed
Yes

Review

Needs Review
No
Interp. Status
scored
Historical
No

Dates

Event date
2026-09-29T00:00:00.000Z

Reasoning: Expanded from assay table. 0 % copper is below against the iocg deposit band [0.9, 0.5, 0.3, 0.2] %. Grade×width 0.0 %·m is below.

Negative factors

  • 0 % copper is below the weak threshold (0.2 %) on the iocg deposit band.
  • Scored from rubric bands during table expansion, not from document context.

Evidence · table

“0.00”

Context: WND26_007

Tags used in scoring

QA/QC Disclosedpositive

Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).

Why it applies: qaqc_disclosed is true

Cut-off Undisclosednegative

High-grade interval reported without stating the cut-off grade used for compositing.

Why it applies: no cutoff_grade was stated

WND26_007Cloncurry · goldGrade: 0.01Grade Unit: g/tIntercept: 1.09 mView all details
Link to this fact

Identity

Hole ID
WND26_007
Project
Cloncurry
Commodity
gold
Region
australia_qld
Reported Region
australia_qld
Ticker
TNC

Geometry

Grade
0.01
Grade Unit
g/t
Intercept
1.09 m
From
96.98 m
To
98.07 m
Intercept Depth
96.98 m

Classification

Deposit Type
iocg
Sample Type
drill
Group ID
WND26_007:96.98-98.07
Mining Method
open_pit

Location

Location
Main Zone
CRS
MGA94 Zone 54
Loc. Source
document

QA/QC

Laboratory
ALS Brisbane
QA/QC Disclosed
Yes
QP Signed
Yes
QA/QC Methods
standards, blanks, duplicates

Metal Equivalent

Metal Eq. Grade
0.01
Metal Eq. Unit
% Cu-Eq
Assumptions Disclosed
Yes

Compositing

Dilution Disclosed
Yes

Review

Needs Review
No
Interp. Status
scored
Historical
No

Dates

Event date
2026-09-29T00:00:00.000Z

Reasoning: Expanded from assay table. 0.01 g/t gold is below against the open_pit mining band [5, 2, 1, 0.3] g/t. Grade×width 0.0 g/t·m is below.

Negative factors

  • 0.01 g/t gold is below the weak threshold (0.3 g/t) on the open_pit mining band.
  • Scored from rubric bands during table expansion, not from document context.

Evidence · table

“0.01”

Context: WND26_007

Tags used in scoring

QA/QC Disclosedpositive

Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).

Why it applies: qaqc_disclosed is true

Cut-off Undisclosednegative

High-grade interval reported without stating the cut-off grade used for compositing.

Why it applies: no cutoff_grade was stated

WND26_007Cloncurry · copperGrade: 0Grade Unit: %Intercept: 0.9 mView all details
Link to this fact

Identity

Hole ID
WND26_007
Project
Cloncurry
Commodity
copper
Region
australia_qld
Reported Region
australia_qld
Ticker
TNC

Geometry

Grade
0
Grade Unit
%
Intercept
0.9 m
From
98.07 m
To
98.97 m
Intercept Depth
98.07 m

Classification

Deposit Type
iocg
Sample Type
drill
Group ID
WND26_007:98.07-98.97
Mining Method
open_pit

Location

Location
Main Zone
CRS
MGA94 Zone 54
Loc. Source
document

QA/QC

Laboratory
ALS Brisbane
QA/QC Disclosed
Yes
QP Signed
Yes
QA/QC Methods
standards, blanks, duplicates

Metal Equivalent

Metal Eq. Grade
0.01
Metal Eq. Unit
% Cu-Eq
Assumptions Disclosed
Yes

Compositing

Dilution Disclosed
Yes

Review

Needs Review
No
Interp. Status
scored
Historical
No

Dates

Event date
2026-09-29T00:00:00.000Z

Reasoning: Expanded from assay table. 0 % copper is below against the iocg deposit band [0.9, 0.5, 0.3, 0.2] %. Grade×width 0.0 %·m is below.

Negative factors

  • 0 % copper is below the weak threshold (0.2 %) on the iocg deposit band.
  • Scored from rubric bands during table expansion, not from document context.

Evidence · table

“0.00”

Context: WND26_007

Tags used in scoring

QA/QC Disclosedpositive

Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).

Why it applies: qaqc_disclosed is true

Cut-off Undisclosednegative

High-grade interval reported without stating the cut-off grade used for compositing.

Why it applies: no cutoff_grade was stated

WND26_007Cloncurry · goldGrade: 0.01Grade Unit: g/tIntercept: 0.9 mView all details
Link to this fact

Identity

Hole ID
WND26_007
Project
Cloncurry
Commodity
gold
Region
australia_qld
Reported Region
australia_qld
Ticker
TNC

Geometry

Grade
0.01
Grade Unit
g/t
Intercept
0.9 m
From
98.07 m
To
98.97 m
Intercept Depth
98.07 m

Classification

Deposit Type
iocg
Sample Type
drill
Group ID
WND26_007:98.07-98.97
Mining Method
open_pit

Location

Location
Main Zone
CRS
MGA94 Zone 54
Loc. Source
document

QA/QC

Laboratory
ALS Brisbane
QA/QC Disclosed
Yes
QP Signed
Yes
QA/QC Methods
standards, blanks, duplicates

Metal Equivalent

Metal Eq. Grade
0.01
Metal Eq. Unit
% Cu-Eq
Assumptions Disclosed
Yes

Compositing

Dilution Disclosed
Yes

Review

Needs Review
No
Interp. Status
scored
Historical
No

Dates

Event date
2026-09-29T00:00:00.000Z

Reasoning: Expanded from assay table. 0.01 g/t gold is below against the open_pit mining band [5, 2, 1, 0.3] g/t. Grade×width 0.0 g/t·m is below.

Negative factors

  • 0.01 g/t gold is below the weak threshold (0.3 g/t) on the open_pit mining band.
  • Scored from rubric bands during table expansion, not from document context.

Evidence · table

“0.01”

Context: WND26_007

Tags used in scoring

QA/QC Disclosedpositive

Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).

Why it applies: qaqc_disclosed is true

Cut-off Undisclosednegative

High-grade interval reported without stating the cut-off grade used for compositing.

Why it applies: no cutoff_grade was stated

WND26_007Cloncurry · copperGrade: 0.2Grade Unit: %Intercept: 1.05 mView all details
Link to this fact

Identity

Hole ID
WND26_007
Project
Cloncurry
Commodity
copper
Region
australia_qld
Reported Region
australia_qld
Ticker
TNC

Geometry

Grade
0.2
Grade Unit
%
Intercept
1.05 m
From
98.97 m
To
100.02 m
Intercept Depth
98.97 m

Classification

Deposit Type
iocg
Sample Type
drill
Group ID
WND26_007:98.97-100.02
Mining Method
open_pit

Location

Location
Main Zone
CRS
MGA94 Zone 54
Loc. Source
document

QA/QC

Laboratory
ALS Brisbane
QA/QC Disclosed
Yes
QP Signed
Yes
QA/QC Methods
standards, blanks, duplicates

Metal Equivalent

Metal Eq. Grade
0.27
Metal Eq. Unit
% Cu-Eq
Assumptions Disclosed
Yes

Compositing

Dilution Disclosed
Yes

Review

Needs Review
No
Interp. Status
scored
Historical
No

Dates

Event date
2026-09-29T00:00:00.000Z

Reasoning: Expanded from assay table. 0.2 % copper is weak against the iocg deposit band [0.9, 0.5, 0.3, 0.2] %. Grade×width 0.2 %·m is below (grade alone is weak; the better of the two is used).

Negative factors

  • Scored from rubric bands during table expansion, not from document context.

Evidence · table

“0.20”

Context: WND26_007

Tags used in scoring

QA/QC Disclosedpositive

Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).

Why it applies: qaqc_disclosed is true

Cut-off Undisclosednegative

High-grade interval reported without stating the cut-off grade used for compositing.

Why it applies: no cutoff_grade was stated

WND26_007Cloncurry · goldGrade: 0.07Grade Unit: g/tIntercept: 1.05 mView all details
Link to this fact

Identity

Hole ID
WND26_007
Project
Cloncurry
Commodity
gold
Region
australia_qld
Reported Region
australia_qld
Ticker
TNC

Geometry

Grade
0.07
Grade Unit
g/t
Intercept
1.05 m
From
98.97 m
To
100.02 m
Intercept Depth
98.97 m

Classification

Deposit Type
iocg
Sample Type
drill
Group ID
WND26_007:98.97-100.02
Mining Method
open_pit

Location

Location
Main Zone
CRS
MGA94 Zone 54
Loc. Source
document

QA/QC

Laboratory
ALS Brisbane
QA/QC Disclosed
Yes
QP Signed
Yes
QA/QC Methods
standards, blanks, duplicates

Metal Equivalent

Metal Eq. Grade
0.27
Metal Eq. Unit
% Cu-Eq
Assumptions Disclosed
Yes

Compositing

Dilution Disclosed
Yes

Review

Needs Review
No
Interp. Status
scored
Historical
No

Dates

Event date
2026-09-29T00:00:00.000Z

Reasoning: Expanded from assay table. 0.07 g/t gold is below against the open_pit mining band [5, 2, 1, 0.3] g/t. Grade×width 0.1 g/t·m is below.

Negative factors

  • 0.07 g/t gold is below the weak threshold (0.3 g/t) on the open_pit mining band.
  • Scored from rubric bands during table expansion, not from document context.

Evidence · table

“0.07”

Context: WND26_007

Tags used in scoring

QA/QC Disclosedpositive

Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).

Why it applies: qaqc_disclosed is true

Cut-off Undisclosednegative

High-grade interval reported without stating the cut-off grade used for compositing.

Why it applies: no cutoff_grade was stated

WND26_007Cloncurry · copperGrade: 0.01Grade Unit: %Intercept: 0.98 mView all details
Link to this fact

Identity

Hole ID
WND26_007
Project
Cloncurry
Commodity
copper
Region
australia_qld
Reported Region
australia_qld
Ticker
TNC

Geometry

Grade
0.01
Grade Unit
%
Intercept
0.98 m
From
100.02 m
To
101 m
Intercept Depth
100.02 m

Classification

Deposit Type
iocg
Sample Type
drill
Group ID
WND26_007:100.02-101
Mining Method
open_pit

Location

Location
Main Zone
CRS
MGA94 Zone 54
Loc. Source
document

QA/QC

Laboratory
ALS Brisbane
QA/QC Disclosed
Yes
QP Signed
Yes
QA/QC Methods
standards, blanks, duplicates

Metal Equivalent

Metal Eq. Grade
0.07
Metal Eq. Unit
% Cu-Eq
Assumptions Disclosed
Yes

Compositing

Dilution Disclosed
Yes

Review

Needs Review
No
Interp. Status
scored
Historical
No

Dates

Event date
2026-09-29T00:00:00.000Z

Reasoning: Expanded from assay table. 0.01 % copper is below against the iocg deposit band [0.9, 0.5, 0.3, 0.2] %. Grade×width 0.0 %·m is below.

Negative factors

  • 0.01 % copper is below the weak threshold (0.2 %) on the iocg deposit band.
  • Scored from rubric bands during table expansion, not from document context.

Evidence · table

“0.01”

Context: WND26_007

Tags used in scoring

QA/QC Disclosedpositive

Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).

Why it applies: qaqc_disclosed is true

Cut-off Undisclosednegative

High-grade interval reported without stating the cut-off grade used for compositing.

Why it applies: no cutoff_grade was stated

WND26_007Cloncurry · goldGrade: 0.06Grade Unit: g/tIntercept: 0.98 mView all details
Link to this fact

Identity

Hole ID
WND26_007
Project
Cloncurry
Commodity
gold
Region
australia_qld
Reported Region
australia_qld
Ticker
TNC

Geometry

Grade
0.06
Grade Unit
g/t
Intercept
0.98 m
From
100.02 m
To
101 m
Intercept Depth
100.02 m

Classification

Deposit Type
iocg
Sample Type
drill
Group ID
WND26_007:100.02-101
Mining Method
open_pit

Location

Location
Main Zone
CRS
MGA94 Zone 54
Loc. Source
document

QA/QC

Laboratory
ALS Brisbane
QA/QC Disclosed
Yes
QP Signed
Yes
QA/QC Methods
standards, blanks, duplicates

Metal Equivalent

Metal Eq. Grade
0.07
Metal Eq. Unit
% Cu-Eq
Assumptions Disclosed
Yes

Compositing

Dilution Disclosed
Yes

Review

Needs Review
No
Interp. Status
scored
Historical
No

Dates

Event date
2026-09-29T00:00:00.000Z

Reasoning: Expanded from assay table. 0.06 g/t gold is below against the open_pit mining band [5, 2, 1, 0.3] g/t. Grade×width 0.1 g/t·m is below.

Negative factors

  • 0.06 g/t gold is below the weak threshold (0.3 g/t) on the open_pit mining band.
  • Scored from rubric bands during table expansion, not from document context.

Evidence · table

“0.06”

Context: WND26_007

Tags used in scoring

QA/QC Disclosedpositive

Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).

Why it applies: qaqc_disclosed is true

Cut-off Undisclosednegative

High-grade interval reported without stating the cut-off grade used for compositing.

Why it applies: no cutoff_grade was stated

WND26_007Cloncurry · copperGrade: 0.23Grade Unit: %Intercept: 1.02 mView all details
Link to this fact

Identity

Hole ID
WND26_007
Project
Cloncurry
Commodity
copper
Region
australia_qld
Reported Region
australia_qld
Ticker
TNC

Geometry

Grade
0.23
Grade Unit
%
Intercept
1.02 m
From
101 m
To
102.02 m
Intercept Depth
101 m

Classification

Deposit Type
iocg
Sample Type
drill
Group ID
WND26_007:101-102.02
Mining Method
open_pit

Location

Location
Main Zone
CRS
MGA94 Zone 54
Loc. Source
document

QA/QC

Laboratory
ALS Brisbane
QA/QC Disclosed
Yes
QP Signed
Yes
QA/QC Methods
standards, blanks, duplicates

Metal Equivalent

Metal Eq. Grade
0.34
Metal Eq. Unit
% Cu-Eq
Assumptions Disclosed
Yes

Compositing

Dilution Disclosed
Yes

Review

Needs Review
No
Interp. Status
scored
Historical
No

Dates

Event date
2026-09-29T00:00:00.000Z

Reasoning: Expanded from assay table. 0.23 % copper is weak against the iocg deposit band [0.9, 0.5, 0.3, 0.2] %. Grade×width 0.2 %·m is below (grade alone is weak; the better of the two is used).

Negative factors

  • Scored from rubric bands during table expansion, not from document context.

Evidence · table

“0.23”

Context: WND26_007

Tags used in scoring

QA/QC Disclosedpositive

Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).

Why it applies: qaqc_disclosed is true

Cut-off Undisclosednegative

High-grade interval reported without stating the cut-off grade used for compositing.

Why it applies: no cutoff_grade was stated

WND26_007Cloncurry · goldGrade: 0.11Grade Unit: g/tIntercept: 1.02 mView all details
Link to this fact

Identity

Hole ID
WND26_007
Project
Cloncurry
Commodity
gold
Region
australia_qld
Reported Region
australia_qld
Ticker
TNC

Geometry

Grade
0.11
Grade Unit
g/t
Intercept
1.02 m
From
101 m
To
102.02 m
Intercept Depth
101 m

Classification

Deposit Type
iocg
Sample Type
drill
Group ID
WND26_007:101-102.02
Mining Method
open_pit

Location

Location
Main Zone
CRS
MGA94 Zone 54
Loc. Source
document

QA/QC

Laboratory
ALS Brisbane
QA/QC Disclosed
Yes
QP Signed
Yes
QA/QC Methods
standards, blanks, duplicates

Metal Equivalent

Metal Eq. Grade
0.34
Metal Eq. Unit
% Cu-Eq
Assumptions Disclosed
Yes

Compositing

Dilution Disclosed
Yes

Review

Needs Review
No
Interp. Status
scored
Historical
No

Dates

Event date
2026-09-29T00:00:00.000Z

Reasoning: Expanded from assay table. 0.11 g/t gold is below against the open_pit mining band [5, 2, 1, 0.3] g/t. Grade×width 0.1 g/t·m is below.

Negative factors

  • 0.11 g/t gold is below the weak threshold (0.3 g/t) on the open_pit mining band.
  • Scored from rubric bands during table expansion, not from document context.

Evidence · table

“0.11”

Context: WND26_007

Tags used in scoring

QA/QC Disclosedpositive

Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).

Why it applies: qaqc_disclosed is true

Cut-off Undisclosednegative

High-grade interval reported without stating the cut-off grade used for compositing.

Why it applies: no cutoff_grade was stated

WND26_007Cloncurry · copperGrade: 0.12Grade Unit: %Intercept: 0.98 mView all details
Link to this fact

Identity

Hole ID
WND26_007
Project
Cloncurry
Commodity
copper
Region
australia_qld
Reported Region
australia_qld
Ticker
TNC

Geometry

Grade
0.12
Grade Unit
%
Intercept
0.98 m
From
102.02 m
To
103 m
Intercept Depth
102.02 m

Classification

Deposit Type
iocg
Sample Type
drill
Group ID
WND26_007:102.02-103
Mining Method
open_pit

Location

Location
Main Zone
CRS
MGA94 Zone 54
Loc. Source
document

QA/QC

Laboratory
ALS Brisbane
QA/QC Disclosed
Yes
QP Signed
Yes
QA/QC Methods
standards, blanks, duplicates

Metal Equivalent

Metal Eq. Grade
0.16
Metal Eq. Unit
% Cu-Eq
Assumptions Disclosed
Yes

Compositing

Dilution Disclosed
Yes

Review

Needs Review
No
Interp. Status
scored
Historical
No

Dates

Event date
2026-09-29T00:00:00.000Z

Reasoning: Expanded from assay table. 0.12 % copper is below against the iocg deposit band [0.9, 0.5, 0.3, 0.2] %. Grade×width 0.1 %·m is below.

Negative factors

  • 0.12 % copper is below the weak threshold (0.2 %) on the iocg deposit band.
  • Scored from rubric bands during table expansion, not from document context.

Evidence · table

“0.12”

Context: WND26_007

Tags used in scoring

QA/QC Disclosedpositive

Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).

Why it applies: qaqc_disclosed is true

Cut-off Undisclosednegative

High-grade interval reported without stating the cut-off grade used for compositing.

Why it applies: no cutoff_grade was stated

WND26_007Cloncurry · goldGrade: 0.04Grade Unit: g/tIntercept: 0.98 mView all details
Link to this fact

Identity

Hole ID
WND26_007
Project
Cloncurry
Commodity
gold
Region
australia_qld
Reported Region
australia_qld
Ticker
TNC

Geometry

Grade
0.04
Grade Unit
g/t
Intercept
0.98 m
From
102.02 m
To
103 m
Intercept Depth
102.02 m

Classification

Deposit Type
iocg
Sample Type
drill
Group ID
WND26_007:102.02-103
Mining Method
open_pit

Location

Location
Main Zone
CRS
MGA94 Zone 54
Loc. Source
document

QA/QC

Laboratory
ALS Brisbane
QA/QC Disclosed
Yes
QP Signed
Yes
QA/QC Methods
standards, blanks, duplicates

Metal Equivalent

Metal Eq. Grade
0.16
Metal Eq. Unit
% Cu-Eq
Assumptions Disclosed
Yes

Compositing

Dilution Disclosed
Yes

Review

Needs Review
No
Interp. Status
scored
Historical
No

Dates

Event date
2026-09-29T00:00:00.000Z

Reasoning: Expanded from assay table. 0.04 g/t gold is below against the open_pit mining band [5, 2, 1, 0.3] g/t. Grade×width 0.0 g/t·m is below.

Negative factors

  • 0.04 g/t gold is below the weak threshold (0.3 g/t) on the open_pit mining band.
  • Scored from rubric bands during table expansion, not from document context.

Evidence · table

“0.04”

Context: WND26_007

Tags used in scoring

QA/QC Disclosedpositive

Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).

Why it applies: qaqc_disclosed is true

Cut-off Undisclosednegative

High-grade interval reported without stating the cut-off grade used for compositing.

Why it applies: no cutoff_grade was stated

WND26_007Cloncurry · copperGrade: 0.02Grade Unit: %Intercept: 1.02 mView all details
Link to this fact

Identity

Hole ID
WND26_007
Project
Cloncurry
Commodity
copper
Region
australia_qld
Reported Region
australia_qld
Ticker
TNC

Geometry

Grade
0.02
Grade Unit
%
Intercept
1.02 m
From
103 m
To
104.02 m
Intercept Depth
103 m

Classification

Deposit Type
iocg
Sample Type
drill
Group ID
WND26_007:103-104.02
Mining Method
open_pit

Location

Location
Main Zone
CRS
MGA94 Zone 54
Loc. Source
document

QA/QC

Laboratory
ALS Brisbane
QA/QC Disclosed
Yes
QP Signed
Yes
QA/QC Methods
standards, blanks, duplicates

Metal Equivalent

Metal Eq. Grade
0.08
Metal Eq. Unit
% Cu-Eq
Assumptions Disclosed
Yes

Compositing

Dilution Disclosed
Yes

Review

Needs Review
No
Interp. Status
scored
Historical
No

Dates

Event date
2026-09-29T00:00:00.000Z

Reasoning: Expanded from assay table. 0.02 % copper is below against the iocg deposit band [0.9, 0.5, 0.3, 0.2] %. Grade×width 0.0 %·m is below.

Negative factors

  • 0.02 % copper is below the weak threshold (0.2 %) on the iocg deposit band.
  • Scored from rubric bands during table expansion, not from document context.

Evidence · table

“0.02”

Context: WND26_007

Tags used in scoring

QA/QC Disclosedpositive

Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).

Why it applies: qaqc_disclosed is true

Cut-off Undisclosednegative

High-grade interval reported without stating the cut-off grade used for compositing.

Why it applies: no cutoff_grade was stated

WND26_007Cloncurry · goldGrade: 0.06Grade Unit: g/tIntercept: 1.02 mView all details
Link to this fact

Identity

Hole ID
WND26_007
Project
Cloncurry
Commodity
gold
Region
australia_qld
Reported Region
australia_qld
Ticker
TNC

Geometry

Grade
0.06
Grade Unit
g/t
Intercept
1.02 m
From
103 m
To
104.02 m
Intercept Depth
103 m

Classification

Deposit Type
iocg
Sample Type
drill
Group ID
WND26_007:103-104.02
Mining Method
open_pit

Location

Location
Main Zone
CRS
MGA94 Zone 54
Loc. Source
document

QA/QC

Laboratory
ALS Brisbane
QA/QC Disclosed
Yes
QP Signed
Yes
QA/QC Methods
standards, blanks, duplicates

Metal Equivalent

Metal Eq. Grade
0.08
Metal Eq. Unit
% Cu-Eq
Assumptions Disclosed
Yes

Compositing

Dilution Disclosed
Yes

Review

Needs Review
No
Interp. Status
scored
Historical
No

Dates

Event date
2026-09-29T00:00:00.000Z

Reasoning: Expanded from assay table. 0.06 g/t gold is below against the open_pit mining band [5, 2, 1, 0.3] g/t. Grade×width 0.1 g/t·m is below.

Negative factors

  • 0.06 g/t gold is below the weak threshold (0.3 g/t) on the open_pit mining band.
  • Scored from rubric bands during table expansion, not from document context.

Evidence · table

“0.06”

Context: WND26_007

Tags used in scoring

QA/QC Disclosedpositive

Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).

Why it applies: qaqc_disclosed is true

Cut-off Undisclosednegative

High-grade interval reported without stating the cut-off grade used for compositing.

Why it applies: no cutoff_grade was stated

WND26_007Cloncurry · copperGrade: 0.01Grade Unit: %Intercept: 0.95 mView all details
Link to this fact

Identity

Hole ID
WND26_007
Project
Cloncurry
Commodity
copper
Region
australia_qld
Reported Region
australia_qld
Ticker
TNC

Geometry

Grade
0.01
Grade Unit
%
Intercept
0.95 m
From
104.02 m
To
104.97 m
Intercept Depth
104.02 m

Classification

Deposit Type
iocg
Sample Type
drill
Group ID
WND26_007:104.02-104.97
Mining Method
open_pit

Location

Location
Main Zone
CRS
MGA94 Zone 54
Loc. Source
document

QA/QC

Laboratory
ALS Brisbane
QA/QC Disclosed
Yes
QP Signed
Yes
QA/QC Methods
standards, blanks, duplicates

Metal Equivalent

Metal Eq. Grade
0.02
Metal Eq. Unit
% Cu-Eq
Assumptions Disclosed
Yes

Compositing

Dilution Disclosed
Yes

Review

Needs Review
No
Interp. Status
scored
Historical
No

Dates

Event date
2026-09-29T00:00:00.000Z

Reasoning: Expanded from assay table. 0.01 % copper is below against the iocg deposit band [0.9, 0.5, 0.3, 0.2] %. Grade×width 0.0 %·m is below.

Negative factors

  • 0.01 % copper is below the weak threshold (0.2 %) on the iocg deposit band.
  • Scored from rubric bands during table expansion, not from document context.

Evidence · table

“0.01”

Context: WND26_007

Tags used in scoring

QA/QC Disclosedpositive

Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).

Why it applies: qaqc_disclosed is true

Cut-off Undisclosednegative

High-grade interval reported without stating the cut-off grade used for compositing.

Why it applies: no cutoff_grade was stated

WND26_007Cloncurry · goldGrade: 0.01Grade Unit: g/tIntercept: 0.95 mView all details
Link to this fact

Identity

Hole ID
WND26_007
Project
Cloncurry
Commodity
gold
Region
australia_qld
Reported Region
australia_qld
Ticker
TNC

Geometry

Grade
0.01
Grade Unit
g/t
Intercept
0.95 m
From
104.02 m
To
104.97 m
Intercept Depth
104.02 m

Classification

Deposit Type
iocg
Sample Type
drill
Group ID
WND26_007:104.02-104.97
Mining Method
open_pit

Location

Location
Main Zone
CRS
MGA94 Zone 54
Loc. Source
document

QA/QC

Laboratory
ALS Brisbane
QA/QC Disclosed
Yes
QP Signed
Yes
QA/QC Methods
standards, blanks, duplicates

Metal Equivalent

Metal Eq. Grade
0.02
Metal Eq. Unit
% Cu-Eq
Assumptions Disclosed
Yes

Compositing

Dilution Disclosed
Yes

Review

Needs Review
No
Interp. Status
scored
Historical
No

Dates

Event date
2026-09-29T00:00:00.000Z

Reasoning: Expanded from assay table. 0.01 g/t gold is below against the open_pit mining band [5, 2, 1, 0.3] g/t. Grade×width 0.0 g/t·m is below.

Negative factors

  • 0.01 g/t gold is below the weak threshold (0.3 g/t) on the open_pit mining band.
  • Scored from rubric bands during table expansion, not from document context.

Evidence · table

“0.01”

Context: WND26_007

Tags used in scoring

QA/QC Disclosedpositive

Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).

Why it applies: qaqc_disclosed is true

Cut-off Undisclosednegative

High-grade interval reported without stating the cut-off grade used for compositing.

Why it applies: no cutoff_grade was stated

WND26_007Cloncurry · copperGrade: 0.04Grade Unit: %Intercept: 0.97 mView all details
Link to this fact

Identity

Hole ID
WND26_007
Project
Cloncurry
Commodity
copper
Region
australia_qld
Reported Region
australia_qld
Ticker
TNC

Geometry

Grade
0.04
Grade Unit
%
Intercept
0.97 m
From
181.98 m
To
182.95 m
Intercept Depth
181.98 m

Classification

Deposit Type
iocg
Sample Type
drill
Group ID
WND26_007:181.98-182.95
Mining Method
open_pit

Location

Location
Main Zone
CRS
MGA94 Zone 54
Loc. Source
document

QA/QC

Laboratory
ALS Brisbane
QA/QC Disclosed
Yes
QP Signed
Yes
QA/QC Methods
standards, blanks, duplicates

Metal Equivalent

Metal Eq. Grade
0.05
Metal Eq. Unit
% Cu-Eq
Assumptions Disclosed
Yes

Compositing

Dilution Disclosed
Yes

Review

Needs Review
No
Interp. Status
scored
Historical
No

Dates

Event date
2026-09-29T00:00:00.000Z

Reasoning: Expanded from assay table. 0.04 % copper is below against the iocg deposit band [0.9, 0.5, 0.3, 0.2] %. Grade×width 0.0 %·m is below.

Negative factors

  • 0.04 % copper is below the weak threshold (0.2 %) on the iocg deposit band.
  • Scored from rubric bands during table expansion, not from document context.

Evidence · table

“0.04”

Context: WND26_007

Tags used in scoring

QA/QC Disclosedpositive

Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).

Why it applies: qaqc_disclosed is true

Cut-off Undisclosednegative

High-grade interval reported without stating the cut-off grade used for compositing.

Why it applies: no cutoff_grade was stated

WND26_007Cloncurry · goldGrade: 0.01Grade Unit: g/tIntercept: 0.97 mView all details
Link to this fact

Identity

Hole ID
WND26_007
Project
Cloncurry
Commodity
gold
Region
australia_qld
Reported Region
australia_qld
Ticker
TNC

Geometry

Grade
0.01
Grade Unit
g/t
Intercept
0.97 m
From
181.98 m
To
182.95 m
Intercept Depth
181.98 m

Classification

Deposit Type
iocg
Sample Type
drill
Group ID
WND26_007:181.98-182.95
Mining Method
open_pit

Location

Location
Main Zone
CRS
MGA94 Zone 54
Loc. Source
document

QA/QC

Laboratory
ALS Brisbane
QA/QC Disclosed
Yes
QP Signed
Yes
QA/QC Methods
standards, blanks, duplicates

Metal Equivalent

Metal Eq. Grade
0.05
Metal Eq. Unit
% Cu-Eq
Assumptions Disclosed
Yes

Compositing

Dilution Disclosed
Yes

Review

Needs Review
No
Interp. Status
scored
Historical
No

Dates

Event date
2026-09-29T00:00:00.000Z

Reasoning: Expanded from assay table. 0.01 g/t gold is below against the open_pit mining band [5, 2, 1, 0.3] g/t. Grade×width 0.0 g/t·m is below.

Negative factors

  • 0.01 g/t gold is below the weak threshold (0.3 g/t) on the open_pit mining band.
  • Scored from rubric bands during table expansion, not from document context.

Evidence · table

“0.01”

Context: WND26_007

Tags used in scoring

QA/QC Disclosedpositive

Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).

Why it applies: qaqc_disclosed is true

Cut-off Undisclosednegative

High-grade interval reported without stating the cut-off grade used for compositing.

Why it applies: no cutoff_grade was stated

WND26_007Cloncurry · copperGrade: 0.12Grade Unit: %Intercept: 1.02 mView all details
Link to this fact

Identity

Hole ID
WND26_007
Project
Cloncurry
Commodity
copper
Region
australia_qld
Reported Region
australia_qld
Ticker
TNC

Geometry

Grade
0.12
Grade Unit
%
Intercept
1.02 m
From
182.95 m
To
183.97 m
Intercept Depth
182.95 m

Classification

Deposit Type
iocg
Sample Type
drill
Group ID
WND26_007:182.95-183.97
Mining Method
open_pit

Location

Location
Main Zone
CRS
MGA94 Zone 54
Loc. Source
document

QA/QC

Laboratory
ALS Brisbane
QA/QC Disclosed
Yes
QP Signed
Yes
QA/QC Methods
standards, blanks, duplicates

Metal Equivalent

Metal Eq. Grade
0.18
Metal Eq. Unit
% Cu-Eq
Assumptions Disclosed
Yes

Compositing

Dilution Disclosed
Yes

Review

Needs Review
No
Interp. Status
scored
Historical
No

Dates

Event date
2026-09-29T00:00:00.000Z

Reasoning: Expanded from assay table. 0.12 % copper is below against the iocg deposit band [0.9, 0.5, 0.3, 0.2] %. Grade×width 0.1 %·m is below.

Negative factors

  • 0.12 % copper is below the weak threshold (0.2 %) on the iocg deposit band.
  • Scored from rubric bands during table expansion, not from document context.

Evidence · table

“0.12”

Context: WND26_007

Tags used in scoring

QA/QC Disclosedpositive

Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).

Why it applies: qaqc_disclosed is true

Cut-off Undisclosednegative

High-grade interval reported without stating the cut-off grade used for compositing.

Why it applies: no cutoff_grade was stated

WND26_007Cloncurry · goldGrade: 0.06Grade Unit: g/tIntercept: 1.02 mView all details
Link to this fact

Identity

Hole ID
WND26_007
Project
Cloncurry
Commodity
gold
Region
australia_qld
Reported Region
australia_qld
Ticker
TNC

Geometry

Grade
0.06
Grade Unit
g/t
Intercept
1.02 m
From
182.95 m
To
183.97 m
Intercept Depth
182.95 m

Classification

Deposit Type
iocg
Sample Type
drill
Group ID
WND26_007:182.95-183.97
Mining Method
open_pit

Location

Location
Main Zone
CRS
MGA94 Zone 54
Loc. Source
document

QA/QC

Laboratory
ALS Brisbane
QA/QC Disclosed
Yes
QP Signed
Yes
QA/QC Methods
standards, blanks, duplicates

Metal Equivalent

Metal Eq. Grade
0.18
Metal Eq. Unit
% Cu-Eq
Assumptions Disclosed
Yes

Compositing

Dilution Disclosed
Yes

Review

Needs Review
No
Interp. Status
scored
Historical
No

Dates

Event date
2026-09-29T00:00:00.000Z

Reasoning: Expanded from assay table. 0.06 g/t gold is below against the open_pit mining band [5, 2, 1, 0.3] g/t. Grade×width 0.1 g/t·m is below.

Negative factors

  • 0.06 g/t gold is below the weak threshold (0.3 g/t) on the open_pit mining band.
  • Scored from rubric bands during table expansion, not from document context.

Evidence · table

“0.06”

Context: WND26_007

Tags used in scoring

QA/QC Disclosedpositive

Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).

Why it applies: qaqc_disclosed is true

Cut-off Undisclosednegative

High-grade interval reported without stating the cut-off grade used for compositing.

Why it applies: no cutoff_grade was stated

WND26_007Cloncurry · copperGrade: 0.02Grade Unit: %Intercept: 0.99 mView all details
Link to this fact

Identity

Hole ID
WND26_007
Project
Cloncurry
Commodity
copper
Region
australia_qld
Reported Region
australia_qld
Ticker
TNC

Geometry

Grade
0.02
Grade Unit
%
Intercept
0.99 m
From
183.97 m
To
184.96 m
Intercept Depth
183.97 m

Classification

Deposit Type
iocg
Sample Type
drill
Group ID
WND26_007:183.97-184.96
Mining Method
open_pit

Location

Location
Main Zone
CRS
MGA94 Zone 54
Loc. Source
document

QA/QC

Laboratory
ALS Brisbane
QA/QC Disclosed
Yes
QP Signed
Yes
QA/QC Methods
standards, blanks, duplicates

Metal Equivalent

Metal Eq. Grade
0.03
Metal Eq. Unit
% Cu-Eq
Assumptions Disclosed
Yes

Compositing

Dilution Disclosed
Yes

Review

Needs Review
No
Interp. Status
scored
Historical
No

Dates

Event date
2026-09-29T00:00:00.000Z

Reasoning: Expanded from assay table. 0.02 % copper is below against the iocg deposit band [0.9, 0.5, 0.3, 0.2] %. Grade×width 0.0 %·m is below.

Negative factors

  • 0.02 % copper is below the weak threshold (0.2 %) on the iocg deposit band.
  • Scored from rubric bands during table expansion, not from document context.

Evidence · table

“0.02”

Context: WND26_007

Tags used in scoring

QA/QC Disclosedpositive

Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).

Why it applies: qaqc_disclosed is true

Cut-off Undisclosednegative

High-grade interval reported without stating the cut-off grade used for compositing.

Why it applies: no cutoff_grade was stated

WND26_007Cloncurry · goldGrade: 0.01Grade Unit: g/tIntercept: 0.99 mView all details
Link to this fact

Identity

Hole ID
WND26_007
Project
Cloncurry
Commodity
gold
Region
australia_qld
Reported Region
australia_qld
Ticker
TNC

Geometry

Grade
0.01
Grade Unit
g/t
Intercept
0.99 m
From
183.97 m
To
184.96 m
Intercept Depth
183.97 m

Classification

Deposit Type
iocg
Sample Type
drill
Group ID
WND26_007:183.97-184.96
Mining Method
open_pit

Location

Location
Main Zone
CRS
MGA94 Zone 54
Loc. Source
document

QA/QC

Laboratory
ALS Brisbane
QA/QC Disclosed
Yes
QP Signed
Yes
QA/QC Methods
standards, blanks, duplicates

Metal Equivalent

Metal Eq. Grade
0.03
Metal Eq. Unit
% Cu-Eq
Assumptions Disclosed
Yes

Compositing

Dilution Disclosed
Yes

Review

Needs Review
No
Interp. Status
scored
Historical
No

Dates

Event date
2026-09-29T00:00:00.000Z

Reasoning: Expanded from assay table. 0.01 g/t gold is below against the open_pit mining band [5, 2, 1, 0.3] g/t. Grade×width 0.0 g/t·m is below.

Negative factors

  • 0.01 g/t gold is below the weak threshold (0.3 g/t) on the open_pit mining band.
  • Scored from rubric bands during table expansion, not from document context.

Evidence · table

“0.01”

Context: WND26_007

Tags used in scoring

QA/QC Disclosedpositive

Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).

Why it applies: qaqc_disclosed is true

Cut-off Undisclosednegative

High-grade interval reported without stating the cut-off grade used for compositing.

Why it applies: no cutoff_grade was stated

WND26_007Cloncurry · copperGrade: 1.49Grade Unit: %Intercept: 1.01 mView all details
Link to this fact

Identity

Hole ID
WND26_007
Project
Cloncurry
Commodity
copper
Region
australia_qld
Reported Region
australia_qld
Ticker
TNC

Geometry

Grade
1.49
Grade Unit
%
Intercept
1.01 m
From
184.96 m
To
185.97 m
Intercept Depth
184.96 m

Classification

Deposit Type
iocg
Sample Type
drill
Group ID
WND26_007:184.96-185.97
Mining Method
open_pit

Location

Location
Main Zone
CRS
MGA94 Zone 54
Loc. Source
document

QA/QC

Laboratory
ALS Brisbane
QA/QC Disclosed
Yes
QP Signed
Yes
QA/QC Methods
standards, blanks, duplicates

Metal Equivalent

Metal Eq. Grade
2.44
Metal Eq. Unit
% Cu-Eq
Assumptions Disclosed
Yes

Compositing

Dilution Disclosed
Yes

Review

Needs Review
No
Interp. Status
scored
Historical
No

Dates

Event date
2026-09-29T00:00:00.000Z

Reasoning: Expanded from assay table. 1.49 % copper is exceptional against the iocg deposit band [0.9, 0.5, 0.3, 0.2] %. Grade×width 1.5 %·m is below (grade alone is exceptional; the better of the two is used).

Positive factors

  • 1.49 % copper is exceptional on the iocg deposit band.

Negative factors

  • Scored from rubric bands during table expansion, not from document context.

Evidence · table

“1.49”

Context: WND26_007

Tags used in scoring

QA/QC Disclosedpositive

Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).

Why it applies: qaqc_disclosed is true

Cut-off Undisclosednegative

High-grade interval reported without stating the cut-off grade used for compositing.

Why it applies: no cutoff_grade was stated

WND26_007Cloncurry · goldGrade: 0.94Grade Unit: g/tIntercept: 1.01 mView all details
Link to this fact

Identity

Hole ID
WND26_007
Project
Cloncurry
Commodity
gold
Region
australia_qld
Reported Region
australia_qld
Ticker
TNC

Geometry

Grade
0.94
Grade Unit
g/t
Intercept
1.01 m
From
184.96 m
To
185.97 m
Intercept Depth
184.96 m

Classification

Deposit Type
iocg
Sample Type
drill
Group ID
WND26_007:184.96-185.97
Mining Method
open_pit

Location

Location
Main Zone
CRS
MGA94 Zone 54
Loc. Source
document

QA/QC

Laboratory
ALS Brisbane
QA/QC Disclosed
Yes
QP Signed
Yes
QA/QC Methods
standards, blanks, duplicates

Metal Equivalent

Metal Eq. Grade
2.44
Metal Eq. Unit
% Cu-Eq
Assumptions Disclosed
Yes

Compositing

Dilution Disclosed
Yes

Review

Needs Review
No
Interp. Status
scored
Historical
No

Dates

Event date
2026-09-29T00:00:00.000Z

Reasoning: Expanded from assay table. 0.94 g/t gold is weak against the open_pit mining band [5, 2, 1, 0.3] g/t. Grade×width 0.9 g/t·m is below (grade alone is weak; the better of the two is used).

Negative factors

  • Scored from rubric bands during table expansion, not from document context.

Evidence · table

“0.94”

Context: WND26_007

Tags used in scoring

QA/QC Disclosedpositive

Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).

Why it applies: qaqc_disclosed is true

Cut-off Undisclosednegative

High-grade interval reported without stating the cut-off grade used for compositing.

Why it applies: no cutoff_grade was stated

WND26_007Cloncurry · copperGrade: 0.54Grade Unit: %Intercept: 1.03 mView all details
Link to this fact

Identity

Hole ID
WND26_007
Project
Cloncurry
Commodity
copper
Region
australia_qld
Reported Region
australia_qld
Ticker
TNC

Geometry

Grade
0.54
Grade Unit
%
Intercept
1.03 m
From
185.97 m
To
187 m
Intercept Depth
185.97 m

Classification

Deposit Type
iocg
Sample Type
drill
Group ID
WND26_007:185.97-187
Mining Method
open_pit

Location

Location
Main Zone
CRS
MGA94 Zone 54
Loc. Source
document

QA/QC

Laboratory
ALS Brisbane
QA/QC Disclosed
Yes
QP Signed
Yes
QA/QC Methods
standards, blanks, duplicates

Metal Equivalent

Metal Eq. Grade
0.59
Metal Eq. Unit
% Cu-Eq
Assumptions Disclosed
Yes

Compositing

Dilution Disclosed
Yes

Review

Needs Review
No
Interp. Status
scored
Historical
No

Dates

Event date
2026-09-29T00:00:00.000Z

Reasoning: Expanded from assay table. 0.54 % copper is strong against the iocg deposit band [0.9, 0.5, 0.3, 0.2] %. Grade×width 0.6 %·m is below (grade alone is strong; the better of the two is used).

Positive factors

  • 0.54 % copper is strong on the iocg deposit band.

Negative factors

  • Scored from rubric bands during table expansion, not from document context.

Evidence · table

“0.54”

Context: WND26_007

Tags used in scoring

QA/QC Disclosedpositive

Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).

Why it applies: qaqc_disclosed is true

Cut-off Undisclosednegative

High-grade interval reported without stating the cut-off grade used for compositing.

Why it applies: no cutoff_grade was stated

WND26_007Cloncurry · goldGrade: 0.05Grade Unit: g/tIntercept: 1.03 mView all details
Link to this fact

Identity

Hole ID
WND26_007
Project
Cloncurry
Commodity
gold
Region
australia_qld
Reported Region
australia_qld
Ticker
TNC

Geometry

Grade
0.05
Grade Unit
g/t
Intercept
1.03 m
From
185.97 m
To
187 m
Intercept Depth
185.97 m

Classification

Deposit Type
iocg
Sample Type
drill
Group ID
WND26_007:185.97-187
Mining Method
open_pit

Location

Location
Main Zone
CRS
MGA94 Zone 54
Loc. Source
document

QA/QC

Laboratory
ALS Brisbane
QA/QC Disclosed
Yes
QP Signed
Yes
QA/QC Methods
standards, blanks, duplicates

Metal Equivalent

Metal Eq. Grade
0.59
Metal Eq. Unit
% Cu-Eq
Assumptions Disclosed
Yes

Compositing

Dilution Disclosed
Yes

Review

Needs Review
No
Interp. Status
scored
Historical
No

Dates

Event date
2026-09-29T00:00:00.000Z

Reasoning: Expanded from assay table. 0.05 g/t gold is below against the open_pit mining band [5, 2, 1, 0.3] g/t. Grade×width 0.1 g/t·m is below.

Negative factors

  • 0.05 g/t gold is below the weak threshold (0.3 g/t) on the open_pit mining band.
  • Scored from rubric bands during table expansion, not from document context.

Evidence · table

“0.05”

Context: WND26_007

Tags used in scoring

QA/QC Disclosedpositive

Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).

Why it applies: qaqc_disclosed is true

Cut-off Undisclosednegative

High-grade interval reported without stating the cut-off grade used for compositing.

Why it applies: no cutoff_grade was stated

WND26_007Cloncurry · copperGrade: 0.24Grade Unit: %Intercept: 1 mView all details
Link to this fact

Identity

Hole ID
WND26_007
Project
Cloncurry
Commodity
copper
Region
australia_qld
Reported Region
australia_qld
Ticker
TNC

Geometry

Grade
0.24
Grade Unit
%
Intercept
1 m
From
187 m
To
188 m
Intercept Depth
187 m

Classification

Deposit Type
iocg
Sample Type
drill
Group ID
WND26_007:187-188
Mining Method
open_pit

Location

Location
Main Zone
CRS
MGA94 Zone 54
Loc. Source
document

QA/QC

Laboratory
ALS Brisbane
QA/QC Disclosed
Yes
QP Signed
Yes
QA/QC Methods
standards, blanks, duplicates

Metal Equivalent

Metal Eq. Grade
0.26
Metal Eq. Unit
% Cu-Eq
Assumptions Disclosed
Yes

Compositing

Dilution Disclosed
Yes

Review

Needs Review
No
Interp. Status
scored
Historical
No

Dates

Event date
2026-09-29T00:00:00.000Z

Reasoning: Expanded from assay table. 0.24 % copper is weak against the iocg deposit band [0.9, 0.5, 0.3, 0.2] %. Grade×width 0.2 %·m is below (grade alone is weak; the better of the two is used).

Negative factors

  • Scored from rubric bands during table expansion, not from document context.

Evidence · table

“0.24”

Context: WND26_007

Tags used in scoring

QA/QC Disclosedpositive

Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).

Why it applies: qaqc_disclosed is true

Cut-off Undisclosednegative

High-grade interval reported without stating the cut-off grade used for compositing.

Why it applies: no cutoff_grade was stated

WND26_007Cloncurry · goldGrade: 0.02Grade Unit: g/tIntercept: 1 mView all details
Link to this fact

Identity

Hole ID
WND26_007
Project
Cloncurry
Commodity
gold
Region
australia_qld
Reported Region
australia_qld
Ticker
TNC

Geometry

Grade
0.02
Grade Unit
g/t
Intercept
1 m
From
187 m
To
188 m
Intercept Depth
187 m

Classification

Deposit Type
iocg
Sample Type
drill
Group ID
WND26_007:187-188
Mining Method
open_pit

Location

Location
Main Zone
CRS
MGA94 Zone 54
Loc. Source
document

QA/QC

Laboratory
ALS Brisbane
QA/QC Disclosed
Yes
QP Signed
Yes
QA/QC Methods
standards, blanks, duplicates

Metal Equivalent

Metal Eq. Grade
0.26
Metal Eq. Unit
% Cu-Eq
Assumptions Disclosed
Yes

Compositing

Dilution Disclosed
Yes

Review

Needs Review
No
Interp. Status
scored
Historical
No

Dates

Event date
2026-09-29T00:00:00.000Z

Reasoning: Expanded from assay table. 0.02 g/t gold is below against the open_pit mining band [5, 2, 1, 0.3] g/t. Grade×width 0.0 g/t·m is below.

Negative factors

  • 0.02 g/t gold is below the weak threshold (0.3 g/t) on the open_pit mining band.
  • Scored from rubric bands during table expansion, not from document context.

Evidence · table

“0.02”

Context: WND26_007

Tags used in scoring

QA/QC Disclosedpositive

Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).

Why it applies: qaqc_disclosed is true

Cut-off Undisclosednegative

High-grade interval reported without stating the cut-off grade used for compositing.

Why it applies: no cutoff_grade was stated

WND26_007Cloncurry · copperGrade: 0.18Grade Unit: %Intercept: 1 mView all details
Link to this fact

Identity

Hole ID
WND26_007
Project
Cloncurry
Commodity
copper
Region
australia_qld
Reported Region
australia_qld
Ticker
TNC

Geometry

Grade
0.18
Grade Unit
%
Intercept
1 m
From
188 m
To
189 m
Intercept Depth
188 m

Classification

Deposit Type
iocg
Sample Type
drill
Group ID
WND26_007:188-189
Mining Method
open_pit

Location

Location
Main Zone
CRS
MGA94 Zone 54
Loc. Source
document

QA/QC

Laboratory
ALS Brisbane
QA/QC Disclosed
Yes
QP Signed
Yes
QA/QC Methods
standards, blanks, duplicates

Metal Equivalent

Metal Eq. Grade
0.21
Metal Eq. Unit
% Cu-Eq
Assumptions Disclosed
Yes

Compositing

Dilution Disclosed
Yes

Review

Needs Review
No
Interp. Status
scored
Historical
No

Dates

Event date
2026-09-29T00:00:00.000Z

Reasoning: Expanded from assay table. 0.18 % copper is below against the iocg deposit band [0.9, 0.5, 0.3, 0.2] %. Grade×width 0.2 %·m is below.

Negative factors

  • 0.18 % copper is below the weak threshold (0.2 %) on the iocg deposit band.
  • Scored from rubric bands during table expansion, not from document context.

Evidence · table

“0.18”

Context: WND26_007

Tags used in scoring

QA/QC Disclosedpositive

Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).

Why it applies: qaqc_disclosed is true

Cut-off Undisclosednegative

High-grade interval reported without stating the cut-off grade used for compositing.

Why it applies: no cutoff_grade was stated

WND26_007Cloncurry · goldGrade: 0.03Grade Unit: g/tIntercept: 1 mView all details
Link to this fact

Identity

Hole ID
WND26_007
Project
Cloncurry
Commodity
gold
Region
australia_qld
Reported Region
australia_qld
Ticker
TNC

Geometry

Grade
0.03
Grade Unit
g/t
Intercept
1 m
From
188 m
To
189 m
Intercept Depth
188 m

Classification

Deposit Type
iocg
Sample Type
drill
Group ID
WND26_007:188-189
Mining Method
open_pit

Location

Location
Main Zone
CRS
MGA94 Zone 54
Loc. Source
document

QA/QC

Laboratory
ALS Brisbane
QA/QC Disclosed
Yes
QP Signed
Yes
QA/QC Methods
standards, blanks, duplicates

Metal Equivalent

Metal Eq. Grade
0.21
Metal Eq. Unit
% Cu-Eq
Assumptions Disclosed
Yes

Compositing

Dilution Disclosed
Yes

Review

Needs Review
No
Interp. Status
scored
Historical
No

Dates

Event date
2026-09-29T00:00:00.000Z

Reasoning: Expanded from assay table. 0.03 g/t gold is below against the open_pit mining band [5, 2, 1, 0.3] g/t. Grade×width 0.0 g/t·m is below.

Negative factors

  • 0.03 g/t gold is below the weak threshold (0.3 g/t) on the open_pit mining band.
  • Scored from rubric bands during table expansion, not from document context.

Evidence · table

“0.03”

Context: WND26_007

Tags used in scoring

QA/QC Disclosedpositive

Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).

Why it applies: qaqc_disclosed is true

Cut-off Undisclosednegative

High-grade interval reported without stating the cut-off grade used for compositing.

Why it applies: no cutoff_grade was stated

WND26_007Cloncurry · copperGrade: 0.2Grade Unit: %Intercept: 1 mView all details
Link to this fact

Identity

Hole ID
WND26_007
Project
Cloncurry
Commodity
copper
Region
australia_qld
Reported Region
australia_qld
Ticker
TNC

Geometry

Grade
0.2
Grade Unit
%
Intercept
1 m
From
189 m
To
190 m
Intercept Depth
189 m

Classification

Deposit Type
iocg
Sample Type
drill
Group ID
WND26_007:189-190
Mining Method
open_pit

Location

Location
Main Zone
CRS
MGA94 Zone 54
Loc. Source
document

QA/QC

Laboratory
ALS Brisbane
QA/QC Disclosed
Yes
QP Signed
Yes
QA/QC Methods
standards, blanks, duplicates

Metal Equivalent

Metal Eq. Grade
0.21
Metal Eq. Unit
% Cu-Eq
Assumptions Disclosed
Yes

Compositing

Dilution Disclosed
Yes

Review

Needs Review
No
Interp. Status
scored
Historical
No

Dates

Event date
2026-09-29T00:00:00.000Z

Reasoning: Expanded from assay table. 0.2 % copper is weak against the iocg deposit band [0.9, 0.5, 0.3, 0.2] %. Grade×width 0.2 %·m is below (grade alone is weak; the better of the two is used).

Negative factors

  • Scored from rubric bands during table expansion, not from document context.

Evidence · table

“0.20”

Context: WND26_007

Tags used in scoring

QA/QC Disclosedpositive

Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).

Why it applies: qaqc_disclosed is true

Cut-off Undisclosednegative

High-grade interval reported without stating the cut-off grade used for compositing.

Why it applies: no cutoff_grade was stated

WND26_007Cloncurry · goldGrade: 0.01Grade Unit: g/tIntercept: 1 mView all details
Link to this fact

Identity

Hole ID
WND26_007
Project
Cloncurry
Commodity
gold
Region
australia_qld
Reported Region
australia_qld
Ticker
TNC

Geometry

Grade
0.01
Grade Unit
g/t
Intercept
1 m
From
189 m
To
190 m
Intercept Depth
189 m

Classification

Deposit Type
iocg
Sample Type
drill
Group ID
WND26_007:189-190
Mining Method
open_pit

Location

Location
Main Zone
CRS
MGA94 Zone 54
Loc. Source
document

QA/QC

Laboratory
ALS Brisbane
QA/QC Disclosed
Yes
QP Signed
Yes
QA/QC Methods
standards, blanks, duplicates

Metal Equivalent

Metal Eq. Grade
0.21
Metal Eq. Unit
% Cu-Eq
Assumptions Disclosed
Yes

Compositing

Dilution Disclosed
Yes

Review

Needs Review
No
Interp. Status
scored
Historical
No

Dates

Event date
2026-09-29T00:00:00.000Z

Reasoning: Expanded from assay table. 0.01 g/t gold is below against the open_pit mining band [5, 2, 1, 0.3] g/t. Grade×width 0.0 g/t·m is below.

Negative factors

  • 0.01 g/t gold is below the weak threshold (0.3 g/t) on the open_pit mining band.
  • Scored from rubric bands during table expansion, not from document context.

Evidence · table

“0.01”

Context: WND26_007

Tags used in scoring

QA/QC Disclosedpositive

Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).

Why it applies: qaqc_disclosed is true

Cut-off Undisclosednegative

High-grade interval reported without stating the cut-off grade used for compositing.

Why it applies: no cutoff_grade was stated

WND26_007Cloncurry · copperGrade: 0.07Grade Unit: %Intercept: 1 mView all details
Link to this fact

Identity

Hole ID
WND26_007
Project
Cloncurry
Commodity
copper
Region
australia_qld
Reported Region
australia_qld
Ticker
TNC

Geometry

Grade
0.07
Grade Unit
%
Intercept
1 m
From
190 m
To
191 m
Intercept Depth
190 m

Classification

Deposit Type
iocg
Sample Type
drill
Group ID
WND26_007:190-191
Mining Method
open_pit

Location

Location
Main Zone
CRS
MGA94 Zone 54
Loc. Source
document

QA/QC

Laboratory
ALS Brisbane
QA/QC Disclosed
Yes
QP Signed
Yes
QA/QC Methods
standards, blanks, duplicates

Metal Equivalent

Metal Eq. Grade
0.09
Metal Eq. Unit
% Cu-Eq
Assumptions Disclosed
Yes

Compositing

Dilution Disclosed
Yes

Review

Needs Review
No
Interp. Status
scored
Historical
No

Dates

Event date
2026-09-29T00:00:00.000Z

Reasoning: Expanded from assay table. 0.07 % copper is below against the iocg deposit band [0.9, 0.5, 0.3, 0.2] %. Grade×width 0.1 %·m is below.

Negative factors

  • 0.07 % copper is below the weak threshold (0.2 %) on the iocg deposit band.
  • Scored from rubric bands during table expansion, not from document context.

Evidence · table

“0.07”

Context: WND26_007

Tags used in scoring

QA/QC Disclosedpositive

Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).

Why it applies: qaqc_disclosed is true

Cut-off Undisclosednegative

High-grade interval reported without stating the cut-off grade used for compositing.

Why it applies: no cutoff_grade was stated

WND26_007Cloncurry · goldGrade: 0.02Grade Unit: g/tIntercept: 1 mView all details
Link to this fact

Identity

Hole ID
WND26_007
Project
Cloncurry
Commodity
gold
Region
australia_qld
Reported Region
australia_qld
Ticker
TNC

Geometry

Grade
0.02
Grade Unit
g/t
Intercept
1 m
From
190 m
To
191 m
Intercept Depth
190 m

Classification

Deposit Type
iocg
Sample Type
drill
Group ID
WND26_007:190-191
Mining Method
open_pit

Location

Location
Main Zone
CRS
MGA94 Zone 54
Loc. Source
document

QA/QC

Laboratory
ALS Brisbane
QA/QC Disclosed
Yes
QP Signed
Yes
QA/QC Methods
standards, blanks, duplicates

Metal Equivalent

Metal Eq. Grade
0.09
Metal Eq. Unit
% Cu-Eq
Assumptions Disclosed
Yes

Compositing

Dilution Disclosed
Yes

Review

Needs Review
No
Interp. Status
scored
Historical
No

Dates

Event date
2026-09-29T00:00:00.000Z

Reasoning: Expanded from assay table. 0.02 g/t gold is below against the open_pit mining band [5, 2, 1, 0.3] g/t. Grade×width 0.0 g/t·m is below.

Negative factors

  • 0.02 g/t gold is below the weak threshold (0.3 g/t) on the open_pit mining band.
  • Scored from rubric bands during table expansion, not from document context.

Evidence · table

“0.02”

Context: WND26_007

Tags used in scoring

QA/QC Disclosedpositive

Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).

Why it applies: qaqc_disclosed is true

Cut-off Undisclosednegative

High-grade interval reported without stating the cut-off grade used for compositing.

Why it applies: no cutoff_grade was stated

WND26_007Cloncurry · copperGrade: 0.09Grade Unit: %Intercept: 1.02 mView all details
Link to this fact

Identity

Hole ID
WND26_007
Project
Cloncurry
Commodity
copper
Region
australia_qld
Reported Region
australia_qld
Ticker
TNC

Geometry

Grade
0.09
Grade Unit
%
Intercept
1.02 m
From
191 m
To
192.02 m
Intercept Depth
191 m

Classification

Deposit Type
iocg
Sample Type
drill
Group ID
WND26_007:191-192.02
Mining Method
open_pit

Location

Location
Main Zone
CRS
MGA94 Zone 54
Loc. Source
document

QA/QC

Laboratory
ALS Brisbane
QA/QC Disclosed
Yes
QP Signed
Yes
QA/QC Methods
standards, blanks, duplicates

Metal Equivalent

Metal Eq. Grade
0.1
Metal Eq. Unit
% Cu-Eq
Assumptions Disclosed
Yes

Compositing

Dilution Disclosed
Yes

Review

Needs Review
No
Interp. Status
scored
Historical
No

Dates

Event date
2026-09-29T00:00:00.000Z

Reasoning: Expanded from assay table. 0.09 % copper is below against the iocg deposit band [0.9, 0.5, 0.3, 0.2] %. Grade×width 0.1 %·m is below.

Negative factors

  • 0.09 % copper is below the weak threshold (0.2 %) on the iocg deposit band.
  • Scored from rubric bands during table expansion, not from document context.

Evidence · table

“0.09”

Context: WND26_007

Tags used in scoring

QA/QC Disclosedpositive

Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).

Why it applies: qaqc_disclosed is true

Cut-off Undisclosednegative

High-grade interval reported without stating the cut-off grade used for compositing.

Why it applies: no cutoff_grade was stated

WND26_007Cloncurry · goldGrade: 0.01Grade Unit: g/tIntercept: 1.02 mView all details
Link to this fact

Identity

Hole ID
WND26_007
Project
Cloncurry
Commodity
gold
Region
australia_qld
Reported Region
australia_qld
Ticker
TNC

Geometry

Grade
0.01
Grade Unit
g/t
Intercept
1.02 m
From
191 m
To
192.02 m
Intercept Depth
191 m

Classification

Deposit Type
iocg
Sample Type
drill
Group ID
WND26_007:191-192.02
Mining Method
open_pit

Location

Location
Main Zone
CRS
MGA94 Zone 54
Loc. Source
document

QA/QC

Laboratory
ALS Brisbane
QA/QC Disclosed
Yes
QP Signed
Yes
QA/QC Methods
standards, blanks, duplicates

Metal Equivalent

Metal Eq. Grade
0.1
Metal Eq. Unit
% Cu-Eq
Assumptions Disclosed
Yes

Compositing

Dilution Disclosed
Yes

Review

Needs Review
No
Interp. Status
scored
Historical
No

Dates

Event date
2026-09-29T00:00:00.000Z

Reasoning: Expanded from assay table. 0.01 g/t gold is below against the open_pit mining band [5, 2, 1, 0.3] g/t. Grade×width 0.0 g/t·m is below.

Negative factors

  • 0.01 g/t gold is below the weak threshold (0.3 g/t) on the open_pit mining band.
  • Scored from rubric bands during table expansion, not from document context.

Evidence · table

“0.01”

Context: WND26_007

Tags used in scoring

QA/QC Disclosedpositive

Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).

Why it applies: qaqc_disclosed is true

Cut-off Undisclosednegative

High-grade interval reported without stating the cut-off grade used for compositing.

Why it applies: no cutoff_grade was stated

Resource Estimates (4)

inferredVero · copperTonnes: 4280000Grade: 0.92Grade Unit: %Contained Metal: 39Contained Unit: ktView all details
Link to this fact

Identity

Project
Vero
Commodity
copper
Ticker
TNC

Resource scope

Estimate type
resource
Resource group id
resource:84f87aeb05ffef588af0

Resource Data

Category
inferred
Tonnes
4280000
Grade
0.92
Grade Unit
%
Contained Metal
39
Contained Unit
kt

Review

Needs Review
No
Historical
No

Dates

Event date
2026-09-29T00:00:00.000Z

Reasoning: Expanded from multi-commodity resource table for completeness.

Negative factors

  • Fact expanded from resource table columns (model omitted this commodity).

Evidence · table

“0.92”

Context: 4.28

Tags used in scoring

Inferred Resourcenegative

Speculative category — limited drilling, geological continuity assumed but not confirmed. Cannot support economic studies alone.

Why it applies: category is "inferred"

Cut-off Undisclosednegative

High-grade interval reported without stating the cut-off grade used for compositing.

Why it applies: no cutoff_grade was stated

inferredCloncurry · silverTonnes: 30000Grade: 0.27Grade Unit: g/tContained Metal: 0Contained Unit: kozView all details
Link to this fact

Identity

Project
Cloncurry
Commodity
silver
Region
australia_qld
Reported Region
Queensland
Ticker
TNC

Resource scope

Estimate type
resource
Reporting standards
jorc
QP Signed
Yes
Qualified person names
Matthew Porter
Resource group id
resource:6ada230a41d6694a72a3
Deposit or zone
Orphan Shear

Resource Data

Category
inferred
Tonnes
30000
Grade
0.27
Grade Unit
g/t
Contained Metal
0
Contained Unit
koz
Cutoff Grade
0.25
Cutoff Unit
% Cu

Review

Needs Review
No
Historical
No

Dates

Event date
2026-09-29T00:00:00.000Z

Reasoning: Weak inferred copper resource at Orphan Shear, requiring further drilling to upgrade confidence. (Expanded from multi-commodity resource table for completeness.)

Positive factors

  • qp_signed
  • jorc_compliant

Negative factors

  • inferred_resource
  • narrow_interval

Evidence · table

“0.27”

Context: 0.03

Tags used in scoring

Inferred Resourcenegative

Speculative category — limited drilling, geological continuity assumed but not confirmed. Cannot support economic studies alone.

Why it applies: category is "inferred"

Cut-off Disclosedpositive

Cut-off grade used for resource reporting is clearly stated, enabling like-for-like comparison.

Why it applies: cutoff_grade is stated

QP/CP Signedpositive

Qualified Person (QP) or Competent Person (CP) named and signed off — a member of a recognized professional association (e.g., AusIMM, SME, AIG, P.Geo) with relevant experience.

Why it applies: qp_signed is true

JORC Compliantpositive

Resource estimate prepared in compliance with JORC Code (Australia) — high reporting standard.

Why it applies: reporting_standards includes jorc

inferredVero · cobaltTonnes: 2660000Grade: 0.24Grade Unit: %Contained Metal: 6.5Contained Unit: ktView all details
Link to this fact

Identity

Project
Vero
Commodity
cobalt
Ticker
TNC

Resource scope

Estimate type
resource
Resource group id
resource:632bf92518a40479ad35

Resource Data

Category
inferred
Tonnes
2660000
Grade
0.24
Grade Unit
%
Contained Metal
6.5
Contained Unit
kt

Review

Needs Review
No
Historical
No

Dates

Event date
2026-09-29T00:00:00.000Z

Reasoning: Expanded from multi-commodity resource table for completeness.

Negative factors

  • Fact expanded from resource table columns (model omitted this commodity).

Evidence · table

“0.24”

Context: 2.66

Tags used in scoring

Inferred Resourcenegative

Speculative category — limited drilling, geological continuity assumed but not confirmed. Cannot support economic studies alone.

Why it applies: category is "inferred"

Cut-off Undisclosednegative

High-grade interval reported without stating the cut-off grade used for compositing.

Why it applies: no cutoff_grade was stated

inferredCloncurry Copper Project · goldTonnes: 20640000Grade: 0.26Grade Unit: g/tContained Metal: 171Contained Unit: kozView all details
Link to this fact

Identity

Project
Cloncurry Copper Project
Commodity
gold
Region
australia_qld
Reported Region
Queensland
Ticker
TNC

Resource scope

Estimate type
resource
Reporting standards
jorc
QP Signed
Yes
Qualified person names
Matthew Porter
Resource group id
resource:f5967971ae81453c3a78
Deposit or zone
Cloncurry Copper-Gold Total

Resource Data

Category
inferred
Tonnes
20640000
Grade
0.26
Grade Unit
g/t
Contained Metal
171
Contained Unit
koz
Cutoff Grade
0

Review

Needs Review
No
Historical
No

Dates

Event date
2026-09-29T00:00:00.000Z

Reasoning: Moderate total gold resource for the Cloncurry Copper Project, with a significant inferred component.

Positive factors

  • qp_signed
  • jorc_compliant

Negative factors

  • inferred_resource

Evidence · table

“0.26”

Context: 20.64

Tags used in scoring

Inferred Resourcenegative

Speculative category — limited drilling, geological continuity assumed but not confirmed. Cannot support economic studies alone.

Why it applies: category is "inferred"

Cut-off Disclosedpositive

Cut-off grade used for resource reporting is clearly stated, enabling like-for-like comparison.

Why it applies: cutoff_grade is stated

QP/CP Signedpositive

Qualified Person (QP) or Competent Person (CP) named and signed off — a member of a recognized professional association (e.g., AusIMM, SME, AIG, P.Geo) with relevant experience.

Why it applies: qp_signed is true

JORC Compliantpositive

Resource estimate prepared in compliance with JORC Code (Australia) — high reporting standard.

Why it applies: reporting_standards includes jorc

How Atlas produces this analysis

Minestarters Atlas uses automated extraction to summarize mining announcements, identify reported measurements, and classify supporting evidence. Sentiment reflects the extracted narrative and classification rules; it is an interpretation, not a reported measurement. Evidence quotes and context are provided where available. Missing data, low-confidence results, and review flags indicate limitations. Check the original publisher announcement before relying on an interpretation.