Thunder Gold Reports 121.5 metres Averaging 0.376 g/t Au in New Target Located 200 metres East of Current Resource Pit Optimization Limit
Original announcement by tmx on
- Company
- Thunder Gold Corp.
- Ticker
- TGOL
- Exchange
- TSX
- Region
- Ontario
- Primary commodity
- Gold
- Secondary commodities
- None reported
- Document categories
- Drill results, Resource update
- Extracted
- 2026-09-22 22:30:50 UTC
Analysis by Minestarters Atlas
Atlas analysis published:
Minestarters Atlas analysis
Summary
Thunder Gold Corp. announced positive drill results from its Tower Mountain Property in Ontario, including a significant new gold discovery 200 meters east of the current resource pit limit in hole TM26-205, which returned 121.5 meters averaging 0.376 g/t Au. The drilling also identified mineralization above the resource cut-off grade in areas previously classified as waste within the 2026 MRE pit shell, indicating potential to reduce the waste-to-ore strip ratio. Hole TM26-213 extended the mineralized trend to the southeast with 589.0 meters averaging 0.195 g/t Au from surface.
Reasoning: The drill program successfully identified new gold mineralization outside the current resource pit limit and demonstrated the potential to convert waste material within the pit to resource, confirming the geological model. While many true widths remain unknown and the overall M&I confidence of the referenced resource is low, the results indicate significant expansion potential and de-risking of the project's economics.
Positive factors
- New target discovery 200m east of current resource pit limit in TM26-205, indicating significant expansion potential.
- Extension of mineralized trend to the southeast by hole TM26-213.
- Conversion of previously classified waste rock within the MRE pit shell into potential resource, improving strip ratio.
- Good to excellent correlation with the current resource model, validating predictive accuracy.
Negative factors
- True width is unknown for many reported intercepts, limiting geological interpretation.
- The referenced 2026 MRE has a very low Measured and Indicated (M&I) confidence (14.05%), indicating early-stage resource definition.
Facts used in scoring: 52
Classification and evidence
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: The release includes a detailed 'Quality Assurance and Quality Control' section outlining procedures such as certified standards, blanks, duplicates, and independent laboratory re-assays.
Evidence · text
“Quality Assurance and Quality Control Diamond drilling utilizes NQ diameter tooling. The core is received at the on-site logging facility where it is, photographed, logged for geotechnical, physical properties and geological data. Samples are identified, recorded, and cut in half by wet diamond saw. Half the core is sent for assay at an accredited laboratory with the remaining half core stored on site. A standard sample length of 1.5 meters is typically employed, varying only at major lithological contacts. Certified standards and blanks are randomly inserted into the sample stream and constitute approximately 10% of the sample stream. Certified standards and blank performance is monitored with any failures evaluated and investigated to determine if said failure is a result of error during submission. Any unexplained failures are identified and the five samples preceding and following the failure are re-assayed. Commencing in 2026, duplicate pulps are prepared at a rate of 1 in every 20 samples. The duplicate pulps are sent to a second independent analytical facility for analyses. Activation Laboratories Ltd., Thunder Bay, Ontario, ISO/IEC 17025:2017 is the primary independent analytical service provider. AGAT Laboratories, Thunder Bay, Ontario, ISO/IEC 17025:2017 is the secondary, independent analytical facility. Samples are, received, dried, crushed to 80% passing 2.0 mm. A 250-gram sample is split and pulverized. Samples are analyzed for gold using a 30-gram lead collection fire assay fusion (FA) with an atomic absorption (AAS) finish. All assay results greater than 5.0 g/t Au are re-assayed using a gravimetric analysis. All assays greater than 30.0 g/t Au are re-assayed using screen metallics where a representative 1000-gram sample is split sieved at 149µm. Assays are performed on the entire +149 µm fraction and two splits of the -149 µm fraction. A final assay is calculated based on the weight of each size fraction.”
Step-Out Extensionpositive
Mineralization extended beyond the previously known limit.
Why it applies: Hole TM26-205 identified significant new mineralization 200 metres east of the current resource pit limit, and TM26-213 extended the mineralized trend to the southeast.
Evidence · text
“The most significant mineralization occurs in TM26-205 (121.5 metres averaging 0.376 g/t Au). This mineralization lies 200 metres east of the 2026 MRE resource pit limit, approximately 400 metres from surface. The target is open in all directions. Follow up drilling targeting the up-dip continuity is planned." "TM26-213 is also significant. Drilled parallel to the eastern TMIC contact, this hole was consistently mineralized from the collar to the end of the hole through an area of sparse drill coverage."”
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: Several holes (TM26-201, 205, 206, 207, 208, 209) tested areas previously classified as waste within the 2026 MRE pit shell, aiming to convert them to resource.
Evidence · text
“With the exception of TM26-213, these holes all tested the 150 million tonnes of waste rock within the 2026 MRE pit shell that were not estimated due to insufficient drill coverage. All intervals above the MRE cut-off grade (0.19 g/t Au) offer potential to reduce the waste:ore strip ratio which is already amongst the lowest of our Canadian peer group.”
Apparent Width Onlynegative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Why it applies: The document explicitly states that 'True Width cannot be estimated due to insufficient information' for many intercepts.
Evidence · text
“True Width cannot be estimated due to insufficient information, except where noted.”
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: True widths are provided for several intercepts in holes TM26-201, TM26-205, TM26-207, and TM26-207A.
Evidence · table
“1.6”
Context: 3.0
Inferred Resourcenegative
Speculative category — limited drilling, geological continuity assumed but not confirmed. Cannot support economic studies alone.
Why it applies: The 2026 MRE includes a substantial Inferred component of 211.1 Mt at 0.45 g/t Au for 3,053 koz.
Evidence · table
“211.1”
Context: Inferred
NI 43-101 Compliantpositive
Resource estimate prepared in compliance with NI 43-101 (Canada) — high reporting standard.
Why it applies: The resource estimate is explicitly stated to be prepared in accordance with National Instrument 43-101 Standards of Disclosure for Mineral Projects.
Evidence · text
“The Report was prepared in accordance with National Instrument 43-101 Standards of Disclosure for Mineral Projects ("NI 43-101") and CIM Definition Standards of Mineral Resources and Mineral Reserves.”
QP/CP Signedpositive
Qualified Person (QP) or Competent Person (CP) named and signed off — a member of a recognized professional association (e.g., AusIMM, SME, AIG, P.Geo) with relevant experience.
Why it applies: The MRE was signed off by multiple Qualified Persons (QPs) including William Lewis, Charley Murahwi, and Tudorel Ciuculescu, all P.Geo. from Micon International Limited.
Evidence · text
“Messrs. William Lewis, P.Geo., Charley Murahwi, P.Geo., FAusIMM, and Tudorel Ciuculescu, P.Geo. from Micon International Limited are the Qualified Persons (QPs) responsible for this MRE.”
Cut-off Disclosedpositive
Cut-off grade used for resource reporting is clearly stated, enabling like-for-like comparison.
Why it applies: The calculated gold cut-off grade for the MRE is clearly stated as 0.19 g/t Au.
Evidence · text
“The calculated gold cut-off grade is 0.19 g/t Au.”
All Inferrednegative
100% of resource is Inferred category — very early stage, no engineering confidence.
Why it applies: The MRE has a very low Measured and Indicated (M&I) confidence of 14.05%, with the majority of the resource (211.1 Mt out of 245.6 Mt) classified as Inferred.
Evidence · table
“211.1”
Context: Inferred
Extracted facts
Stored fact records: 52. Some facts used in scoring do not have a stored record.
Drill Results (50)
TM26-201Tower Mountain · goldGrade: 0.556Grade Unit: g/tIntercept: 3 mView all detailsHide details
Identity
- Hole ID
- TM26-201
- Project
- Tower Mountain
- Commodity
- gold
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- TGOL
Geometry
- Grade
- 0.556
- Grade Unit
- g/t
- Intercept
- 3 m
- True Width
- 1.6 m
- From
- 29 m
- To
- 32 m
- Hole Depth
- 600 m
- Intercept Depth
- 29 m
Classification
- Program
- mixed
- Sample Type
- drill
- Group ID
- TM26-201:29-32
- Mining Method
- open_pit
Location
- Easting
- 300975
- Northing
- 5377254
- Elevation
- 521 m
- Azimuth
- 65 °
- Dip
- -45 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- Activation Laboratories Ltd. and AGAT Laboratories
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Deleterious
- Deleterious Flag
- No
Compositing
- Cutoff Grade
- 0.19
- Cutoff Unit
- g/t Au
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-17T00:00:00.000Z
Reasoning: This intercept is above the MRE cut-off grade and has a disclosed true width, contributing to resource conversion within the pit shell.
Positive factors
- Intercept grade is above the MRE cut-off grade (0.19 g/t Au).
- True width is disclosed.
Evidence · table
“0.556”
Context: 3.0
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 1.6
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
TM26-201Tower Mountain · goldGrade: 0.345Grade Unit: g/tIntercept: 30.4 mView all detailsHide details
Identity
- Hole ID
- TM26-201
- Project
- Tower Mountain
- Commodity
- gold
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- TGOL
Geometry
- Grade
- 0.345
- Grade Unit
- g/t
- Intercept
- 30.4 m
- True Width
- 16.2 m
- From
- 55.6 m
- To
- 86 m
- Hole Depth
- 600 m
- Intercept Depth
- 29 m
Classification
- Program
- mixed
- Sample Type
- drill
- Group ID
- TM26-201:55.6-86
- Mining Method
- open_pit
Location
- Easting
- 300975
- Northing
- 5377254
- Elevation
- 521 m
- Azimuth
- 65 °
- Dip
- -45 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- Activation Laboratories Ltd. and AGAT Laboratories
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Deleterious
- Deleterious Flag
- No
Compositing
- Cutoff Grade
- 0.19
- Cutoff Unit
- g/t Au
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-17T00:00:00.000Z
Reasoning: This intercept is above the MRE cut-off grade with a good length and disclosed true width, contributing to resource conversion within the pit shell.
Positive factors
- Intercept grade is above the MRE cut-off grade (0.19 g/t Au).
- True width is disclosed.
- Good intercept length (30.4m).
Evidence · table
“0.345”
Context: 30.4
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 16.2
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
TM26-201Tower Mountain · goldGrade: 0.228Grade Unit: g/tIntercept: 19.5 mView all detailsHide details
Identity
- Hole ID
- TM26-201
- Project
- Tower Mountain
- Commodity
- gold
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- TGOL
Geometry
- Grade
- 0.228
- Grade Unit
- g/t
- Intercept
- 19.5 m
- True Width
- 10.4 m
- From
- 217.5 m
- To
- 237 m
- Hole Depth
- 600 m
- Intercept Depth
- 29 m
Classification
- Program
- mixed
- Sample Type
- drill
- Group ID
- TM26-201:217.5-237
- Mining Method
- open_pit
Location
- Easting
- 300975
- Northing
- 5377254
- Elevation
- 521 m
- Azimuth
- 65 °
- Dip
- -45 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- Activation Laboratories Ltd. and AGAT Laboratories
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Deleterious
- Deleterious Flag
- No
Compositing
- Cutoff Grade
- 0.19
- Cutoff Unit
- g/t Au
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-17T00:00:00.000Z
Reasoning: This intercept is above the MRE cut-off grade and has a disclosed true width, contributing to resource conversion within the pit shell.
Positive factors
- Intercept grade is above the MRE cut-off grade (0.19 g/t Au).
- True width is disclosed.
Evidence · table
“0.228”
Context: 19.5
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 10.4
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
TM26-201Tower Mountain · goldGrade: 5.745Grade Unit: g/tIntercept: 1.5 mView all detailsHide details
Identity
- Hole ID
- TM26-201
- Project
- Tower Mountain
- Commodity
- gold
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- TGOL
Geometry
- Grade
- 5.745
- Grade Unit
- g/t
- Intercept
- 1.5 m
- From
- 367.5 m
- To
- 369 m
- Hole Depth
- 600 m
- Intercept Depth
- 29 m
Classification
- Program
- mixed
- Sample Type
- drill
- Group ID
- TM26-201:367.5-369
- Mining Method
- open_pit
Location
- Easting
- 300975
- Northing
- 5377254
- Elevation
- 521 m
- Azimuth
- 65 °
- Dip
- -45 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- Activation Laboratories Ltd. and AGAT Laboratories
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Deleterious
- Deleterious Flag
- No
Compositing
- Cutoff Grade
- 0.19
- Cutoff Unit
- g/t Au
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-17T00:00:00.000Z
Reasoning: This intercept shows an exceptional grade but is very narrow and lacks true width information, limiting its immediate materiality despite being above the MRE cut-off.
Positive factors
- Exceptional grade (5.745 g/t Au) for an open-pit gold deposit.
Negative factors
- Very narrow intercept length (1.5m).
- True width is unknown.
Evidence · table
“5.745”
Context: 1.5
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
TM26-201Tower Mountain · goldGrade: 0.25Grade Unit: g/tIntercept: 31.5 mView all detailsHide details
Identity
- Hole ID
- TM26-201
- Project
- Tower Mountain
- Commodity
- gold
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- TGOL
Geometry
- Grade
- 0.25
- Grade Unit
- g/t
- Intercept
- 31.5 m
- From
- 383.5 m
- To
- 415 m
- Hole Depth
- 600 m
- Intercept Depth
- 29 m
Classification
- Program
- mixed
- Sample Type
- drill
- Group ID
- TM26-201:383.5-415
- Mining Method
- open_pit
Location
- Easting
- 300975
- Northing
- 5377254
- Elevation
- 521 m
- Azimuth
- 65 °
- Dip
- -45 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- Activation Laboratories Ltd. and AGAT Laboratories
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Deleterious
- Deleterious Flag
- No
Compositing
- Cutoff Grade
- 0.19
- Cutoff Unit
- g/t Au
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-17T00:00:00.000Z
Reasoning: This intercept is above the MRE cut-off grade with a good length, but the unknown true width reduces confidence in its actual thickness.
Positive factors
- Intercept grade is above the MRE cut-off grade (0.19 g/t Au).
- Good intercept length (31.5m).
Negative factors
- True width is unknown.
Evidence · table
“0.250”
Context: 31.5
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
TM26-201Tower Mountain · goldGrade: 0.26Grade Unit: g/tIntercept: 9 mView all detailsHide details
Identity
- Hole ID
- TM26-201
- Project
- Tower Mountain
- Commodity
- gold
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- TGOL
Geometry
- Grade
- 0.26
- Grade Unit
- g/t
- Intercept
- 9 m
- From
- 576.5 m
- To
- 585.5 m
- Hole Depth
- 600 m
- Intercept Depth
- 29 m
Classification
- Program
- mixed
- Sample Type
- drill
- Group ID
- TM26-201:576.5-585.5
- Mining Method
- open_pit
Location
- Easting
- 300975
- Northing
- 5377254
- Elevation
- 521 m
- Azimuth
- 65 °
- Dip
- -45 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- Activation Laboratories Ltd. and AGAT Laboratories
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Deleterious
- Deleterious Flag
- No
Compositing
- Cutoff Grade
- 0.19
- Cutoff Unit
- g/t Au
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-17T00:00:00.000Z
Reasoning: This intercept is above the MRE cut-off grade, but the unknown true width reduces confidence in its actual thickness.
Positive factors
- Intercept grade is above the MRE cut-off grade (0.19 g/t Au).
Negative factors
- True width is unknown.
Evidence · table
“0.260”
Context: 9.0
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
TM26-205Tower Mountain · goldGrade: 0.545Grade Unit: g/tIntercept: 158.6 mView all detailsHide details
Identity
- Hole ID
- TM26-205
- Project
- Tower Mountain
- Commodity
- gold
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- TGOL
Geometry
- Grade
- 0.545
- Grade Unit
- g/t
- Intercept
- 158.6 m
- True Width
- 82 m
- From
- 4.9 m
- To
- 163.5 m
- Hole Depth
- 603 m
- Intercept Depth
- 4.9 m
Classification
- Program
- mixed
- Sample Type
- drill
- Group ID
- TM26-205:4.9-163.5
- Mining Method
- open_pit
Location
- Easting
- 300901
- Northing
- 5377465
- Elevation
- 494 m
- Azimuth
- 71 °
- Dip
- -44.5 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- Activation Laboratories Ltd. and AGAT Laboratories
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Deleterious
- Deleterious Flag
- No
Compositing
- Cutoff Grade
- 0.19
- Cutoff Unit
- g/t Au
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-17T00:00:00.000Z
Reasoning: This long intercept with moderate grade and disclosed true width confirms and extends mineralization within the current pit limit, validating the resource model.
Positive factors
- Strong intercept length (158.6m) at a moderate grade for open-pit gold.
- True width is disclosed.
- Intercept grade is above the MRE cut-off grade (0.19 g/t Au).
- Demonstrates good to excellent correlation to the current resource model, verifying predictive accuracy.
Evidence · table
“0.545”
Context: 158.6
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 82
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
TM26-205Tower Mountain · goldGrade: 1.088Grade Unit: g/tIntercept: 54 mView all detailsHide details
Identity
- Hole ID
- TM26-205
- Project
- Tower Mountain
- Commodity
- gold
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- TGOL
Geometry
- Grade
- 1.088
- Grade Unit
- g/t
- Intercept
- 54 m
- True Width
- 27.9 m
- From
- 6 m
- To
- 60 m
- Hole Depth
- 603 m
- Intercept Depth
- 4.9 m
Classification
- Program
- mixed
- Sample Type
- drill
- Group ID
- TM26-205:6-60
- Mining Method
- open_pit
Location
- Easting
- 300901
- Northing
- 5377465
- Elevation
- 494 m
- Azimuth
- 71 °
- Dip
- -44.5 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- Activation Laboratories Ltd. and AGAT Laboratories
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Deleterious
- Deleterious Flag
- No
Compositing
- Cutoff Grade
- 0.19
- Cutoff Unit
- g/t Au
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-17T00:00:00.000Z
Reasoning: This high-grade sub-interval near surface with disclosed true width is a strong positive, confirming good mineralization within the current pit limit.
Positive factors
- Moderate grade (1.088 g/t Au) over a significant length (54.0m) for an open-pit gold deposit.
- True width is disclosed.
- Intercept grade is above the MRE cut-off grade (0.19 g/t Au).
- Located near surface, which is favorable for open-pit mining.
Evidence · table
“1.088”
Context: 54.0
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 27.9
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
TM26-205Tower Mountain · goldGrade: 1.433Grade Unit: g/tIntercept: 4.5 mView all detailsHide details
Identity
- Hole ID
- TM26-205
- Project
- Tower Mountain
- Commodity
- gold
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- TGOL
Geometry
- Grade
- 1.433
- Grade Unit
- g/t
- Intercept
- 4.5 m
- True Width
- 2.3 m
- From
- 78 m
- To
- 82.5 m
- Hole Depth
- 603 m
- Intercept Depth
- 4.9 m
Classification
- Program
- mixed
- Sample Type
- drill
- Group ID
- TM26-205:78-82.5
- Mining Method
- open_pit
Location
- Easting
- 300901
- Northing
- 5377465
- Elevation
- 494 m
- Azimuth
- 71 °
- Dip
- -44.5 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- Activation Laboratories Ltd. and AGAT Laboratories
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Deleterious
- Deleterious Flag
- No
Compositing
- Cutoff Grade
- 0.19
- Cutoff Unit
- g/t Au
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-17T00:00:00.000Z
Reasoning: This intercept shows a moderate grade with disclosed true width, contributing to the overall positive results within the pit limit.
Positive factors
- Moderate grade (1.433 g/t Au) for an open-pit gold deposit.
- True width is disclosed.
- Intercept grade is above the MRE cut-off grade (0.19 g/t Au).
Evidence · table
“1.433”
Context: 4.5
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 2.3
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
TM26-205Tower Mountain · goldGrade: 0.953Grade Unit: g/tIntercept: 3 mView all detailsHide details
Identity
- Hole ID
- TM26-205
- Project
- Tower Mountain
- Commodity
- gold
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- TGOL
Geometry
- Grade
- 0.953
- Grade Unit
- g/t
- Intercept
- 3 m
- True Width
- 1.6 m
- From
- 94.5 m
- To
- 97.5 m
- Hole Depth
- 603 m
- Intercept Depth
- 4.9 m
Classification
- Program
- mixed
- Sample Type
- drill
- Group ID
- TM26-205:94.5-97.5
- Mining Method
- open_pit
Location
- Easting
- 300901
- Northing
- 5377465
- Elevation
- 494 m
- Azimuth
- 71 °
- Dip
- -44.5 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- Activation Laboratories Ltd. and AGAT Laboratories
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Deleterious
- Deleterious Flag
- No
Compositing
- Cutoff Grade
- 0.19
- Cutoff Unit
- g/t Au
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-17T00:00:00.000Z
Reasoning: This intercept shows a moderate grade with disclosed true width, contributing to the overall positive results within the pit limit.
Positive factors
- Moderate grade (0.953 g/t Au) for an open-pit gold deposit.
- True width is disclosed.
- Intercept grade is above the MRE cut-off grade (0.19 g/t Au).
Evidence · table
“0.953”
Context: 3.0
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 1.6
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
TM26-205Tower Mountain · goldGrade: 0.489Grade Unit: g/tIntercept: 2.5 mView all detailsHide details
Identity
- Hole ID
- TM26-205
- Project
- Tower Mountain
- Commodity
- gold
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- TGOL
Geometry
- Grade
- 0.489
- Grade Unit
- g/t
- Intercept
- 2.5 m
- From
- 184.5 m
- To
- 187 m
- Hole Depth
- 603 m
- Intercept Depth
- 4.9 m
Classification
- Program
- mixed
- Sample Type
- drill
- Group ID
- TM26-205:184.5-187
- Mining Method
- open_pit
Location
- Easting
- 300901
- Northing
- 5377465
- Elevation
- 494 m
- Azimuth
- 71 °
- Dip
- -44.5 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- Activation Laboratories Ltd. and AGAT Laboratories
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Deleterious
- Deleterious Flag
- No
Compositing
- Cutoff Grade
- 0.19
- Cutoff Unit
- g/t Au
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-17T00:00:00.000Z
Reasoning: This intercept is above the MRE cut-off grade, but the unknown true width and narrow length reduce its significance.
Positive factors
- Intercept grade is above the MRE cut-off grade (0.19 g/t Au).
Negative factors
- True width is unknown.
Evidence · table
“0.489”
Context: 2.5
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
TM26-205Tower Mountain · goldGrade: 0.204Grade Unit: g/tIntercept: 6 mView all detailsHide details
Identity
- Hole ID
- TM26-205
- Project
- Tower Mountain
- Commodity
- gold
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- TGOL
Geometry
- Grade
- 0.204
- Grade Unit
- g/t
- Intercept
- 6 m
- From
- 295.5 m
- To
- 301.5 m
- Hole Depth
- 603 m
- Intercept Depth
- 4.9 m
Classification
- Program
- mixed
- Sample Type
- drill
- Group ID
- TM26-205:295.5-301.5
- Mining Method
- open_pit
Location
- Easting
- 300901
- Northing
- 5377465
- Elevation
- 494 m
- Azimuth
- 71 °
- Dip
- -44.5 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- Activation Laboratories Ltd. and AGAT Laboratories
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Deleterious
- Deleterious Flag
- No
Compositing
- Cutoff Grade
- 0.19
- Cutoff Unit
- g/t Au
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-17T00:00:00.000Z
Reasoning: This intercept is marginally above the MRE cut-off grade, with unknown true width, contributing to resource conversion.
Positive factors
- Intercept grade is above the MRE cut-off grade (0.19 g/t Au).
Negative factors
- True width is unknown.
Evidence · table
“0.204”
Context: 6.0
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
TM26-205Tower Mountain · goldGrade: 0.327Grade Unit: g/tIntercept: 13.5 mView all detailsHide details
Identity
- Hole ID
- TM26-205
- Project
- Tower Mountain
- Commodity
- gold
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- TGOL
Geometry
- Grade
- 0.327
- Grade Unit
- g/t
- Intercept
- 13.5 m
- From
- 322.5 m
- To
- 336 m
- Hole Depth
- 603 m
- Intercept Depth
- 4.9 m
Classification
- Program
- mixed
- Sample Type
- drill
- Group ID
- TM26-205:322.5-336
- Mining Method
- open_pit
Location
- Easting
- 300901
- Northing
- 5377465
- Elevation
- 494 m
- Azimuth
- 71 °
- Dip
- -44.5 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- Activation Laboratories Ltd. and AGAT Laboratories
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Deleterious
- Deleterious Flag
- No
Compositing
- Cutoff Grade
- 0.19
- Cutoff Unit
- g/t Au
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-17T00:00:00.000Z
Reasoning: This intercept is above the MRE cut-off grade, but the unknown true width reduces confidence in its actual thickness.
Positive factors
- Intercept grade is above the MRE cut-off grade (0.19 g/t Au).
Negative factors
- True width is unknown.
Evidence · table
“0.327”
Context: 13.5
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
TM26-205Tower Mountain · goldGrade: 0.632Grade Unit: g/tIntercept: 7.5 mView all detailsHide details
Identity
- Hole ID
- TM26-205
- Project
- Tower Mountain
- Commodity
- gold
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- TGOL
Geometry
- Grade
- 0.632
- Grade Unit
- g/t
- Intercept
- 7.5 m
- From
- 357 m
- To
- 364.5 m
- Hole Depth
- 603 m
- Intercept Depth
- 4.9 m
Classification
- Program
- mixed
- Sample Type
- drill
- Group ID
- TM26-205:357-364.5
- Mining Method
- open_pit
Location
- Easting
- 300901
- Northing
- 5377465
- Elevation
- 494 m
- Azimuth
- 71 °
- Dip
- -44.5 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- Activation Laboratories Ltd. and AGAT Laboratories
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Deleterious
- Deleterious Flag
- No
Compositing
- Cutoff Grade
- 0.19
- Cutoff Unit
- g/t Au
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-17T00:00:00.000Z
Reasoning: This intercept is above the MRE cut-off grade, but the unknown true width reduces confidence in its actual thickness.
Positive factors
- Intercept grade is above the MRE cut-off grade (0.19 g/t Au).
Negative factors
- True width is unknown.
Evidence · table
“0.632”
Context: 7.5
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
TM26-205Tower Mountain · goldGrade: 0.841Grade Unit: g/tIntercept: 7.5 mView all detailsHide details
Identity
- Hole ID
- TM26-205
- Project
- Tower Mountain
- Commodity
- gold
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- TGOL
Geometry
- Grade
- 0.841
- Grade Unit
- g/t
- Intercept
- 7.5 m
- From
- 373.5 m
- To
- 381 m
- Hole Depth
- 603 m
- Intercept Depth
- 4.9 m
Classification
- Program
- mixed
- Sample Type
- drill
- Group ID
- TM26-205:373.5-381
- Mining Method
- open_pit
Location
- Easting
- 300901
- Northing
- 5377465
- Elevation
- 494 m
- Azimuth
- 71 °
- Dip
- -44.5 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- Activation Laboratories Ltd. and AGAT Laboratories
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Deleterious
- Deleterious Flag
- No
Compositing
- Cutoff Grade
- 0.19
- Cutoff Unit
- g/t Au
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-17T00:00:00.000Z
Reasoning: This intercept is above the MRE cut-off grade, but the unknown true width reduces confidence in its actual thickness.
Positive factors
- Intercept grade is above the MRE cut-off grade (0.19 g/t Au).
Negative factors
- True width is unknown.
Evidence · table
“0.841”
Context: 7.5
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
TM26-205Tower Mountain · goldGrade: 0.376Grade Unit: g/tIntercept: 121.5 mView all detailsHide details
Identity
- Hole ID
- TM26-205
- Project
- Tower Mountain
- Commodity
- gold
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- TGOL
Geometry
- Grade
- 0.376
- Grade Unit
- g/t
- Intercept
- 121.5 m
- From
- 465 m
- To
- 586.5 m
- Hole Depth
- 603 m
- Intercept Depth
- 4.9 m
Classification
- Program
- mixed
- Sample Type
- drill
- Group ID
- TM26-205:465-586.5
- Mining Method
- open_pit
Location
- Easting
- 300901
- Northing
- 5377465
- Elevation
- 494 m
- Azimuth
- 71 °
- Dip
- -44.5 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- Activation Laboratories Ltd. and AGAT Laboratories
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Deleterious
- Deleterious Flag
- No
Compositing
- Cutoff Grade
- 0.19
- Cutoff Unit
- g/t Au
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-17T00:00:00.000Z
Reasoning: This headline intercept represents a significant new discovery and extension of mineralization outside the current resource, with excellent width, despite the unknown true width.
Positive factors
- Significant new mineralization discovered 200m east of the current resource pit limit.
- Exceptional intercept length (121.5m) at a weak grade for open-pit gold, but strong GT product.
- Intercept grade is above the MRE cut-off grade (0.19 g/t Au).
- Target is open in all directions, indicating further expansion potential.
Negative factors
- True width is unknown.
Evidence · table
“0.376”
Context: 121.5
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
TM26-205Tower Mountain · goldGrade: 0.42Grade Unit: g/tIntercept: 18 mView all detailsHide details
Identity
- Hole ID
- TM26-205
- Project
- Tower Mountain
- Commodity
- gold
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- TGOL
Geometry
- Grade
- 0.42
- Grade Unit
- g/t
- Intercept
- 18 m
- From
- 514.5 m
- To
- 532.5 m
- Hole Depth
- 603 m
- Intercept Depth
- 4.9 m
Classification
- Program
- mixed
- Sample Type
- drill
- Group ID
- TM26-205:514.5-532.5
- Mining Method
- open_pit
Location
- Easting
- 300901
- Northing
- 5377465
- Elevation
- 494 m
- Azimuth
- 71 °
- Dip
- -44.5 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- Activation Laboratories Ltd. and AGAT Laboratories
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Deleterious
- Deleterious Flag
- No
Compositing
- Cutoff Grade
- 0.19
- Cutoff Unit
- g/t Au
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-17T00:00:00.000Z
Reasoning: This sub-interval within the new target area is above the MRE cut-off grade, but the unknown true width reduces confidence.
Positive factors
- Intercept grade is above the MRE cut-off grade (0.19 g/t Au).
Negative factors
- True width is unknown.
Evidence · table
“0.420”
Context: 18.0
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
TM26-205Tower Mountain · goldGrade: 1.283Grade Unit: g/tIntercept: 13.5 mView all detailsHide details
Identity
- Hole ID
- TM26-205
- Project
- Tower Mountain
- Commodity
- gold
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- TGOL
Geometry
- Grade
- 1.283
- Grade Unit
- g/t
- Intercept
- 13.5 m
- From
- 555 m
- To
- 568.5 m
- Hole Depth
- 603 m
- Intercept Depth
- 4.9 m
Classification
- Program
- mixed
- Sample Type
- drill
- Group ID
- TM26-205:555-568.5
- Mining Method
- open_pit
Location
- Easting
- 300901
- Northing
- 5377465
- Elevation
- 494 m
- Azimuth
- 71 °
- Dip
- -44.5 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- Activation Laboratories Ltd. and AGAT Laboratories
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Deleterious
- Deleterious Flag
- No
Compositing
- Cutoff Grade
- 0.19
- Cutoff Unit
- g/t Au
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-17T00:00:00.000Z
Reasoning: This high-grade sub-interval within the new target area is a positive, but the unknown true width reduces confidence.
Positive factors
- Moderate grade (1.283 g/t Au) for an open-pit gold deposit.
- Intercept grade is above the MRE cut-off grade (0.19 g/t Au).
Negative factors
- True width is unknown.
Evidence · table
“1.283”
Context: 13.5
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
TM26-206Tower Mountain · goldGrade: 0.191Grade Unit: g/tIntercept: 7.5 mView all detailsHide details
Identity
- Hole ID
- TM26-206
- Project
- Tower Mountain
- Commodity
- gold
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- TGOL
Geometry
- Grade
- 0.191
- Grade Unit
- g/t
- Intercept
- 7.5 m
- From
- 27 m
- To
- 34.5 m
- Hole Depth
- 399 m
- Intercept Depth
- 27 m
Classification
- Program
- mixed
- Sample Type
- drill
- Group ID
- TM26-206:27-34.5
- Mining Method
- open_pit
Location
- Easting
- 301034
- Northing
- 5377593
- Elevation
- 494 m
- Azimuth
- 40 °
- Dip
- -44.6 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- Activation Laboratories Ltd. and AGAT Laboratories
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Deleterious
- Deleterious Flag
- No
Compositing
- Cutoff Grade
- 0.19
- Cutoff Unit
- g/t Au
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-17T00:00:00.000Z
Reasoning: This intercept is marginally above the MRE cut-off grade, contributing to resource conversion within the pit shell, but its significance is limited by grade and unknown true width.
Positive factors
- Intercept grade is marginally above the MRE cut-off grade (0.19 g/t Au).
Negative factors
- True width is unknown.
Evidence · table
“0.191”
Context: 7.5
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
TM26-206Tower Mountain · goldGrade: 1.04Grade Unit: g/tIntercept: 1.5 mView all detailsHide details
Identity
- Hole ID
- TM26-206
- Project
- Tower Mountain
- Commodity
- gold
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- TGOL
Geometry
- Grade
- 1.04
- Grade Unit
- g/t
- Intercept
- 1.5 m
- From
- 172.5 m
- To
- 174 m
- Hole Depth
- 399 m
- Intercept Depth
- 27 m
Classification
- Program
- mixed
- Sample Type
- drill
- Group ID
- TM26-206:172.5-174
- Mining Method
- open_pit
Location
- Easting
- 301034
- Northing
- 5377593
- Elevation
- 494 m
- Azimuth
- 40 °
- Dip
- -44.6 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- Activation Laboratories Ltd. and AGAT Laboratories
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Deleterious
- Deleterious Flag
- No
Compositing
- Cutoff Grade
- 0.19
- Cutoff Unit
- g/t Au
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-17T00:00:00.000Z
Reasoning: This intercept shows a moderate grade but is very narrow and lacks true width information, limiting its immediate materiality despite being above the MRE cut-off.
Positive factors
- Moderate grade (1.04 g/t Au) for an open-pit gold deposit.
- Intercept grade is above the MRE cut-off grade (0.19 g/t Au).
Negative factors
- Very narrow intercept length (1.5m).
- True width is unknown.
Evidence · table
“1.040”
Context: 1.5
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
TM26-206Tower Mountain · goldGrade: 0.209Grade Unit: g/tIntercept: 6 mView all detailsHide details
Identity
- Hole ID
- TM26-206
- Project
- Tower Mountain
- Commodity
- gold
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- TGOL
Geometry
- Grade
- 0.209
- Grade Unit
- g/t
- Intercept
- 6 m
- From
- 258 m
- To
- 264 m
- Hole Depth
- 399 m
- Intercept Depth
- 27 m
Classification
- Program
- mixed
- Sample Type
- drill
- Group ID
- TM26-206:258-264
- Mining Method
- open_pit
Location
- Easting
- 301034
- Northing
- 5377593
- Elevation
- 494 m
- Azimuth
- 40 °
- Dip
- -44.6 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- Activation Laboratories Ltd. and AGAT Laboratories
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Deleterious
- Deleterious Flag
- No
Compositing
- Cutoff Grade
- 0.19
- Cutoff Unit
- g/t Au
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-17T00:00:00.000Z
Reasoning: This intercept is marginally above the MRE cut-off grade, contributing to resource conversion within the pit shell, but its significance is limited by grade and unknown true width.
Positive factors
- Intercept grade is marginally above the MRE cut-off grade (0.19 g/t Au).
Negative factors
- True width is unknown.
Evidence · table
“0.209”
Context: 6.0
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
TM26-206Tower Mountain · goldGrade: 0.197Grade Unit: g/tIntercept: 5.5 mView all detailsHide details
Identity
- Hole ID
- TM26-206
- Project
- Tower Mountain
- Commodity
- gold
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- TGOL
Geometry
- Grade
- 0.197
- Grade Unit
- g/t
- Intercept
- 5.5 m
- From
- 342 m
- To
- 347.5 m
- Hole Depth
- 399 m
- Intercept Depth
- 27 m
Classification
- Program
- mixed
- Sample Type
- drill
- Group ID
- TM26-206:342-347.5
- Mining Method
- open_pit
Location
- Easting
- 301034
- Northing
- 5377593
- Elevation
- 494 m
- Azimuth
- 40 °
- Dip
- -44.6 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- Activation Laboratories Ltd. and AGAT Laboratories
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Deleterious
- Deleterious Flag
- No
Compositing
- Cutoff Grade
- 0.19
- Cutoff Unit
- g/t Au
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-17T00:00:00.000Z
Reasoning: This intercept is marginally above the MRE cut-off grade, contributing to resource conversion within the pit shell, but its significance is limited by grade and unknown true width.
Positive factors
- Intercept grade is marginally above the MRE cut-off grade (0.19 g/t Au).
Negative factors
- True width is unknown.
Evidence · table
“0.197”
Context: 5.5
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
TM26-207Tower Mountain · goldGrade: 0.341Grade Unit: g/tIntercept: 43.5 mView all detailsHide details
Identity
- Hole ID
- TM26-207
- Project
- Tower Mountain
- Commodity
- gold
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- TGOL
Geometry
- Grade
- 0.341
- Grade Unit
- g/t
- Intercept
- 43.5 m
- True Width
- 28.4 m
- From
- 4.5 m
- To
- 48 m
- Hole Depth
- 48 m
- Intercept Depth
- 4.5 m
Classification
- Program
- mixed
- Sample Type
- drill
- Group ID
- TM26-207:4.5-48
- Mining Method
- open_pit
Location
- Easting
- 300820
- Northing
- 5377578
- Elevation
- 463 m
- Azimuth
- 45 °
- Dip
- -44 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- Activation Laboratories Ltd. and AGAT Laboratories
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Deleterious
- Deleterious Flag
- No
Compositing
- Cutoff Grade
- 0.19
- Cutoff Unit
- g/t Au
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-17T00:00:00.000Z
Reasoning: This intercept is above the MRE cut-off grade with good length and disclosed true width, contributing to resource conversion within the pit shell.
Positive factors
- Intercept grade is above the MRE cut-off grade (0.19 g/t Au).
- Good intercept length (43.5m).
- True width is disclosed.
Evidence · table
“0.341”
Context: 43.5
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 28.4
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
TM26-207ATower Mountain · goldGrade: 0.332Grade Unit: g/tIntercept: 82.5 mView all detailsHide details
Identity
- Hole ID
- TM26-207A
- Project
- Tower Mountain
- Commodity
- gold
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- TGOL
Geometry
- Grade
- 0.332
- Grade Unit
- g/t
- Intercept
- 82.5 m
- True Width
- 53.8 m
- From
- 2.8 m
- To
- 85.3 m
- Hole Depth
- 600 m
- Intercept Depth
- 2.8 m
Classification
- Program
- mixed
- Sample Type
- drill
- Group ID
- TM26-207A:2.8-85.3
- Mining Method
- open_pit
Location
- Easting
- 300820.3
- Northing
- 5377578.3
- Elevation
- 463 m
- Azimuth
- 45 °
- Dip
- -44 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- Activation Laboratories Ltd. and AGAT Laboratories
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Deleterious
- Deleterious Flag
- No
Compositing
- Cutoff Grade
- 0.19
- Cutoff Unit
- g/t Au
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-17T00:00:00.000Z
Reasoning: This long intercept with disclosed true width confirms mineralization and continuity, contributing to resource conversion within the pit shell.
Positive factors
- Intercept grade is above the MRE cut-off grade (0.19 g/t Au).
- Strong intercept length (82.5m).
- True width is disclosed.
- Twinned hole results indicate minimal variation, confirming continuity.
Evidence · table
“0.332”
Context: 82.5
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 53.8
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
TM26-207ATower Mountain · goldGrade: 0.32Grade Unit: g/tIntercept: 42.2 mView all detailsHide details
Identity
- Hole ID
- TM26-207A
- Project
- Tower Mountain
- Commodity
- gold
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- TGOL
Geometry
- Grade
- 0.32
- Grade Unit
- g/t
- Intercept
- 42.2 m
- True Width
- 27.5 m
- From
- 2.8 m
- To
- 45 m
- Hole Depth
- 600 m
- Intercept Depth
- 2.8 m
Classification
- Program
- mixed
- Sample Type
- drill
- Group ID
- TM26-207A:2.8-45
- Mining Method
- open_pit
Location
- Easting
- 300820.3
- Northing
- 5377578.3
- Elevation
- 463 m
- Azimuth
- 45 °
- Dip
- -44 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- Activation Laboratories Ltd. and AGAT Laboratories
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Deleterious
- Deleterious Flag
- No
Compositing
- Cutoff Grade
- 0.19
- Cutoff Unit
- g/t Au
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-17T00:00:00.000Z
Reasoning: This sub-interval with good length and disclosed true width contributes to the overall positive results and continuity confirmation.
Positive factors
- Intercept grade is above the MRE cut-off grade (0.19 g/t Au).
- Good intercept length (42.2m).
- True width is disclosed.
Evidence · table
“0.320”
Context: 42.2
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 27.5
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
TM26-207ATower Mountain · goldGrade: 1.05Grade Unit: g/tIntercept: 1.5 mView all detailsHide details
Identity
- Hole ID
- TM26-207A
- Project
- Tower Mountain
- Commodity
- gold
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- TGOL
Geometry
- Grade
- 1.05
- Grade Unit
- g/t
- Intercept
- 1.5 m
- True Width
- 1 m
- From
- 43.5 m
- To
- 45 m
- Hole Depth
- 600 m
- Intercept Depth
- 2.8 m
Classification
- Program
- mixed
- Sample Type
- drill
- Group ID
- TM26-207A:43.5-45
- Mining Method
- open_pit
Location
- Easting
- 300820.3
- Northing
- 5377578.3
- Elevation
- 463 m
- Azimuth
- 45 °
- Dip
- -44 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- Activation Laboratories Ltd. and AGAT Laboratories
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Deleterious
- Deleterious Flag
- No
Compositing
- Cutoff Grade
- 0.19
- Cutoff Unit
- g/t Au
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-17T00:00:00.000Z
Reasoning: This narrow intercept shows a moderate grade with disclosed true width, contributing to the overall positive results.
Positive factors
- Moderate grade (1.05 g/t Au) for an open-pit gold deposit.
- True width is disclosed.
- Intercept grade is above the MRE cut-off grade (0.19 g/t Au).
Negative factors
- Very narrow intercept length (1.5m).
Evidence · table
“1.050”
Context: 1.5
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 1
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
TM26-207ATower Mountain · goldGrade: 2.21Grade Unit: g/tIntercept: 1.5 mView all detailsHide details
Identity
- Hole ID
- TM26-207A
- Project
- Tower Mountain
- Commodity
- gold
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- TGOL
Geometry
- Grade
- 2.21
- Grade Unit
- g/t
- Intercept
- 1.5 m
- True Width
- 1 m
- From
- 49.5 m
- To
- 51 m
- Hole Depth
- 600 m
- Intercept Depth
- 2.8 m
Classification
- Program
- mixed
- Sample Type
- drill
- Group ID
- TM26-207A:49.5-51
- Mining Method
- open_pit
Location
- Easting
- 300820.3
- Northing
- 5377578.3
- Elevation
- 463 m
- Azimuth
- 45 °
- Dip
- -44 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- Activation Laboratories Ltd. and AGAT Laboratories
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Deleterious
- Deleterious Flag
- No
Compositing
- Cutoff Grade
- 0.19
- Cutoff Unit
- g/t Au
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-17T00:00:00.000Z
Reasoning: This narrow intercept shows a strong grade with disclosed true width, contributing to the overall positive results.
Positive factors
- Strong grade (2.21 g/t Au) for an open-pit gold deposit.
- True width is disclosed.
- Intercept grade is above the MRE cut-off grade (0.19 g/t Au).
Negative factors
- Very narrow intercept length (1.5m).
Evidence · table
“2.210”
Context: 1.5
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 1
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
TM26-207ATower Mountain · goldGrade: 0.135Grade Unit: g/tIntercept: 183.5 mView all detailsHide details
Identity
- Hole ID
- TM26-207A
- Project
- Tower Mountain
- Commodity
- gold
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- TGOL
Geometry
- Grade
- 0.135
- Grade Unit
- g/t
- Intercept
- 183.5 m
- From
- 85.3 m
- To
- 268.8 m
- Hole Depth
- 600 m
- Intercept Depth
- 2.8 m
Classification
- Program
- mixed
- Sample Type
- drill
- Group ID
- TM26-207A:85.3-268.8
- Mining Method
- open_pit
Location
- Easting
- 300820.3
- Northing
- 5377578.3
- Elevation
- 463 m
- Azimuth
- 45 °
- Dip
- -44 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- Activation Laboratories Ltd. and AGAT Laboratories
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Deleterious
- Deleterious Flag
- No
Compositing
- Cutoff Grade
- 0.19
- Cutoff Unit
- g/t Au
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-17T00:00:00.000Z
Reasoning: This very long intercept has a grade below the MRE cut-off and unknown true width, limiting its immediate economic significance.
Positive factors
- Exceptional intercept length (183.5m).
Negative factors
- Grade is below the MRE cut-off grade (0.19 g/t Au).
- True width is unknown.
Evidence · table
“0.135”
Context: 183.5
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
TM26-207ATower Mountain · goldGrade: 0.351Grade Unit: g/tIntercept: 24.2 mView all detailsHide details
Identity
- Hole ID
- TM26-207A
- Project
- Tower Mountain
- Commodity
- gold
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- TGOL
Geometry
- Grade
- 0.351
- Grade Unit
- g/t
- Intercept
- 24.2 m
- From
- 85.3 m
- To
- 109.5 m
- Hole Depth
- 600 m
- Intercept Depth
- 2.8 m
Classification
- Program
- mixed
- Sample Type
- drill
- Group ID
- TM26-207A:85.3-109.5
- Mining Method
- open_pit
Location
- Easting
- 300820.3
- Northing
- 5377578.3
- Elevation
- 463 m
- Azimuth
- 45 °
- Dip
- -44 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- Activation Laboratories Ltd. and AGAT Laboratories
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Deleterious
- Deleterious Flag
- No
Compositing
- Cutoff Grade
- 0.19
- Cutoff Unit
- g/t Au
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-17T00:00:00.000Z
Reasoning: This sub-interval is above the MRE cut-off grade, but the unknown true width reduces confidence in its actual thickness.
Positive factors
- Intercept grade is above the MRE cut-off grade (0.19 g/t Au).
Negative factors
- True width is unknown.
Evidence · table
“0.351”
Context: 24.2
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
TM26-207ATower Mountain · goldGrade: 0.106Grade Unit: g/tIntercept: 331.2 mView all detailsHide details
Identity
- Hole ID
- TM26-207A
- Project
- Tower Mountain
- Commodity
- gold
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- TGOL
Geometry
- Grade
- 0.106
- Grade Unit
- g/t
- Intercept
- 331.2 m
- From
- 268.8 m
- To
- 600 m
- Hole Depth
- 600 m
- Intercept Depth
- 2.8 m
Classification
- Program
- mixed
- Sample Type
- drill
- Group ID
- TM26-207A:268.8-600
- Mining Method
- open_pit
Location
- Easting
- 300820.3
- Northing
- 5377578.3
- Elevation
- 463 m
- Azimuth
- 45 °
- Dip
- -44 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- Activation Laboratories Ltd. and AGAT Laboratories
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Deleterious
- Deleterious Flag
- No
Compositing
- Cutoff Grade
- 0.19
- Cutoff Unit
- g/t Au
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-17T00:00:00.000Z
Reasoning: This very long intercept has a grade significantly below the MRE cut-off and unknown true width, limiting its immediate economic significance.
Positive factors
- Exceptional intercept length (331.2m).
Negative factors
- Grade is below the MRE cut-off grade (0.19 g/t Au).
- True width is unknown.
Evidence · table
“0.106”
Context: 331.2
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
TM26-208Tower Mountain · goldGrade: 0.092Grade Unit: g/tIntercept: 498 mView all detailsHide details
Identity
- Hole ID
- TM26-208
- Project
- Tower Mountain
- Commodity
- gold
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- TGOL
Geometry
- Grade
- 0.092
- Grade Unit
- g/t
- Intercept
- 498 m
- From
- 3 m
- To
- 501 m
- Hole Depth
- 501 m
- Intercept Depth
- 3 m
Classification
- Program
- mixed
- Sample Type
- drill
- Group ID
- TM26-208:3-501
- Mining Method
- open_pit
Location
- Easting
- 301351
- Northing
- 5377825
- Elevation
- 476 m
- Azimuth
- 247 °
- Dip
- -44.3 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- Activation Laboratories Ltd. and AGAT Laboratories
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Deleterious
- Deleterious Flag
- No
Compositing
- Cutoff Grade
- 0.19
- Cutoff Unit
- g/t Au
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-17T00:00:00.000Z
Reasoning: This very long intercept has a grade significantly below the MRE cut-off and unknown true width, limiting its immediate economic significance.
Positive factors
- Exceptional intercept length (498.0m).
Negative factors
- Grade is below the MRE cut-off grade (0.19 g/t Au).
- True width is unknown.
Evidence · table
“0.092”
Context: 498.0
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
TM26-208Tower Mountain · goldGrade: 1.01Grade Unit: g/tIntercept: 1.5 mView all detailsHide details
Identity
- Hole ID
- TM26-208
- Project
- Tower Mountain
- Commodity
- gold
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- TGOL
Geometry
- Grade
- 1.01
- Grade Unit
- g/t
- Intercept
- 1.5 m
- From
- 354 m
- To
- 355.5 m
- Hole Depth
- 501 m
- Intercept Depth
- 3 m
Classification
- Program
- mixed
- Sample Type
- drill
- Group ID
- TM26-208:354-355.5
- Mining Method
- open_pit
Location
- Easting
- 301351
- Northing
- 5377825
- Elevation
- 476 m
- Azimuth
- 247 °
- Dip
- -44.3 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- Activation Laboratories Ltd. and AGAT Laboratories
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Deleterious
- Deleterious Flag
- No
Compositing
- Cutoff Grade
- 0.19
- Cutoff Unit
- g/t Au
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-17T00:00:00.000Z
Reasoning: This narrow intercept shows a moderate grade but lacks true width information, limiting its immediate materiality despite being above the MRE cut-off.
Positive factors
- Moderate grade (1.01 g/t Au) for an open-pit gold deposit.
- Intercept grade is above the MRE cut-off grade (0.19 g/t Au).
Negative factors
- Very narrow intercept length (1.5m).
- True width is unknown.
Evidence · table
“1.010”
Context: 1.5
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
TM26-208Tower Mountain · goldGrade: 7.22Grade Unit: g/tIntercept: 1.5 mView all detailsHide details
Identity
- Hole ID
- TM26-208
- Project
- Tower Mountain
- Commodity
- gold
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- TGOL
Geometry
- Grade
- 7.22
- Grade Unit
- g/t
- Intercept
- 1.5 m
- From
- 432 m
- To
- 433.5 m
- Hole Depth
- 501 m
- Intercept Depth
- 3 m
Classification
- Program
- mixed
- Sample Type
- drill
- Group ID
- TM26-208:432-433.5
- Mining Method
- open_pit
Location
- Easting
- 301351
- Northing
- 5377825
- Elevation
- 476 m
- Azimuth
- 247 °
- Dip
- -44.3 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- Activation Laboratories Ltd. and AGAT Laboratories
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Deleterious
- Deleterious Flag
- No
Compositing
- Cutoff Grade
- 0.19
- Cutoff Unit
- g/t Au
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-17T00:00:00.000Z
Reasoning: This intercept shows an exceptional grade but is very narrow and lacks true width information, limiting its immediate materiality despite being above the MRE cut-off.
Positive factors
- Exceptional grade (7.22 g/t Au) for an open-pit gold deposit.
Negative factors
- Very narrow intercept length (1.5m).
- True width is unknown.
Evidence · table
“7.220”
Context: 1.5
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
TM26-208Tower Mountain · goldGrade: 2.09Grade Unit: g/tIntercept: 1.5 mView all detailsHide details
Identity
- Hole ID
- TM26-208
- Project
- Tower Mountain
- Commodity
- gold
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- TGOL
Geometry
- Grade
- 2.09
- Grade Unit
- g/t
- Intercept
- 1.5 m
- From
- 448.5 m
- To
- 450 m
- Hole Depth
- 501 m
- Intercept Depth
- 3 m
Classification
- Program
- mixed
- Sample Type
- drill
- Group ID
- TM26-208:448.5-450
- Mining Method
- open_pit
Location
- Easting
- 301351
- Northing
- 5377825
- Elevation
- 476 m
- Azimuth
- 247 °
- Dip
- -44.3 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- Activation Laboratories Ltd. and AGAT Laboratories
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Deleterious
- Deleterious Flag
- No
Compositing
- Cutoff Grade
- 0.19
- Cutoff Unit
- g/t Au
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-17T00:00:00.000Z
Reasoning: This narrow intercept shows a strong grade but lacks true width information, limiting its immediate materiality despite being above the MRE cut-off.
Positive factors
- Strong grade (2.09 g/t Au) for an open-pit gold deposit.
Negative factors
- Very narrow intercept length (1.5m).
- True width is unknown.
Evidence · table
“2.090”
Context: 1.5
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
TM26-209Tower Mountain · goldGrade: 0.077Grade Unit: g/tIntercept: 417.7 mView all detailsHide details
Identity
- Hole ID
- TM26-209
- Project
- Tower Mountain
- Commodity
- gold
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- TGOL
Geometry
- Grade
- 0.077
- Grade Unit
- g/t
- Intercept
- 417.7 m
- From
- 3.5 m
- To
- 421.2 m
- Hole Depth
- 600 m
- Intercept Depth
- 3.5 m
Classification
- Program
- mixed
- Sample Type
- drill
- Group ID
- TM26-209:3.5-421.2
- Mining Method
- open_pit
Location
- Easting
- 301108
- Northing
- 5377711
- Elevation
- 512 m
- Azimuth
- 310 °
- Dip
- -54.7 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- Activation Laboratories Ltd. and AGAT Laboratories
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Deleterious
- Deleterious Flag
- No
Compositing
- Cutoff Grade
- 0.19
- Cutoff Unit
- g/t Au
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-17T00:00:00.000Z
Reasoning: This very long intercept has a grade significantly below the MRE cut-off and unknown true width, limiting its immediate economic significance.
Positive factors
- Exceptional intercept length (417.7m).
Negative factors
- Grade is below the MRE cut-off grade (0.19 g/t Au).
- True width is unknown.
Evidence · table
“0.077”
Context: 417.7
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
TM26-209Tower Mountain · goldGrade: 0.304Grade Unit: g/tIntercept: 4.5 mView all detailsHide details
Identity
- Hole ID
- TM26-209
- Project
- Tower Mountain
- Commodity
- gold
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- TGOL
Geometry
- Grade
- 0.304
- Grade Unit
- g/t
- Intercept
- 4.5 m
- From
- 171 m
- To
- 175.5 m
- Hole Depth
- 600 m
- Intercept Depth
- 3.5 m
Classification
- Program
- mixed
- Sample Type
- drill
- Group ID
- TM26-209:171-175.5
- Mining Method
- open_pit
Location
- Easting
- 301108
- Northing
- 5377711
- Elevation
- 512 m
- Azimuth
- 310 °
- Dip
- -54.7 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- Activation Laboratories Ltd. and AGAT Laboratories
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Deleterious
- Deleterious Flag
- No
Compositing
- Cutoff Grade
- 0.19
- Cutoff Unit
- g/t Au
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-17T00:00:00.000Z
Reasoning: This sub-interval is above the MRE cut-off grade, but the unknown true width reduces confidence in its actual thickness.
Positive factors
- Intercept grade is above the MRE cut-off grade (0.19 g/t Au).
Negative factors
- True width is unknown.
Evidence · table
“0.304”
Context: 4.5
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
TM26-209Tower Mountain · goldGrade: 0.121Grade Unit: g/tIntercept: 178.8 mView all detailsHide details
Identity
- Hole ID
- TM26-209
- Project
- Tower Mountain
- Commodity
- gold
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- TGOL
Geometry
- Grade
- 0.121
- Grade Unit
- g/t
- Intercept
- 178.8 m
- From
- 421.2 m
- To
- 600 m
- Hole Depth
- 600 m
- Intercept Depth
- 3.5 m
Classification
- Program
- mixed
- Sample Type
- drill
- Group ID
- TM26-209:421.2-600
- Mining Method
- open_pit
Location
- Easting
- 301108
- Northing
- 5377711
- Elevation
- 512 m
- Azimuth
- 310 °
- Dip
- -54.7 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- Activation Laboratories Ltd. and AGAT Laboratories
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Deleterious
- Deleterious Flag
- No
Compositing
- Cutoff Grade
- 0.19
- Cutoff Unit
- g/t Au
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-17T00:00:00.000Z
Reasoning: This very long intercept has a grade significantly below the MRE cut-off and unknown true width, limiting its immediate economic significance.
Positive factors
- Exceptional intercept length (178.8m).
Negative factors
- Grade is below the MRE cut-off grade (0.19 g/t Au).
- True width is unknown.
Evidence · table
“0.121”
Context: 178.8
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
TM26-213Tower Mountain · goldGrade: 0.195Grade Unit: g/tIntercept: 589 mView all detailsHide details
Identity
- Hole ID
- TM26-213
- Project
- Tower Mountain
- Commodity
- gold
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- TGOL
Geometry
- Grade
- 0.195
- Grade Unit
- g/t
- Intercept
- 589 m
- From
- 4 m
- To
- 593 m
- Hole Depth
- 593 m
- Intercept Depth
- 4 m
Classification
- Program
- mixed
- Sample Type
- drill
- Group ID
- TM26-213:4-593
- Mining Method
- open_pit
Location
- Easting
- 300975
- Northing
- 5377253.5
- Elevation
- 521 m
- Azimuth
- 135 °
- Dip
- -44.8 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- Activation Laboratories Ltd. and AGAT Laboratories
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Deleterious
- Deleterious Flag
- No
Compositing
- Cutoff Grade
- 0.19
- Cutoff Unit
- g/t Au
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-17T00:00:00.000Z
Reasoning: This very long intercept extends mineralization to the southeast, indicating significant expansion potential, despite the unknown true width.
Positive factors
- Exceptional intercept length (589.0m) from surface to end-of-hole, extending the mineralized trend to the southeast.
- Intercept grade is marginally above the MRE cut-off grade (0.19 g/t Au).
- Demonstrates consistency of grade across main lithological contact.
Negative factors
- True width is unknown.
Evidence · table
“0.195”
Context: 589.0
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
TM26-213Tower Mountain · goldGrade: 0.223Grade Unit: g/tIntercept: 287.7 mView all detailsHide details
Identity
- Hole ID
- TM26-213
- Project
- Tower Mountain
- Commodity
- gold
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- TGOL
Geometry
- Grade
- 0.223
- Grade Unit
- g/t
- Intercept
- 287.7 m
- From
- 4 m
- To
- 291.7 m
- Hole Depth
- 593 m
- Intercept Depth
- 4 m
Classification
- Program
- mixed
- Sample Type
- drill
- Group ID
- TM26-213:4-291.7
- Mining Method
- open_pit
Location
- Easting
- 300975
- Northing
- 5377253.5
- Elevation
- 521 m
- Azimuth
- 135 °
- Dip
- -44.8 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- Activation Laboratories Ltd. and AGAT Laboratories
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Deleterious
- Deleterious Flag
- No
Compositing
- Cutoff Grade
- 0.19
- Cutoff Unit
- g/t Au
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-17T00:00:00.000Z
Reasoning: This very long sub-interval from surface is above the MRE cut-off grade, contributing to the extension of mineralization, despite the unknown true width.
Positive factors
- Exceptional intercept length (287.7m) from surface.
- Intercept grade is above the MRE cut-off grade (0.19 g/t Au).
Negative factors
- True width is unknown.
Evidence · table
“0.223”
Context: 287.7
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
TM26-213Tower Mountain · goldGrade: 0.567Grade Unit: g/tIntercept: 21 mView all detailsHide details
Identity
- Hole ID
- TM26-213
- Project
- Tower Mountain
- Commodity
- gold
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- TGOL
Geometry
- Grade
- 0.567
- Grade Unit
- g/t
- Intercept
- 21 m
- From
- 30 m
- To
- 51 m
- Hole Depth
- 593 m
- Intercept Depth
- 4 m
Classification
- Program
- mixed
- Sample Type
- drill
- Group ID
- TM26-213:30-51
- Mining Method
- open_pit
Location
- Easting
- 300975
- Northing
- 5377253.5
- Elevation
- 521 m
- Azimuth
- 135 °
- Dip
- -44.8 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- Activation Laboratories Ltd. and AGAT Laboratories
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Deleterious
- Deleterious Flag
- No
Compositing
- Cutoff Grade
- 0.19
- Cutoff Unit
- g/t Au
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-17T00:00:00.000Z
Reasoning: This sub-interval shows a moderate grade above the MRE cut-off, contributing to the extension of mineralization, despite the unknown true width.
Positive factors
- Intercept grade is above the MRE cut-off grade (0.19 g/t Au).
- Moderate grade (0.567 g/t Au) for an open-pit gold deposit.
Negative factors
- True width is unknown.
Evidence · table
“0.567”
Context: 21.0
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
TM26-213Tower Mountain · goldGrade: 0.419Grade Unit: g/tIntercept: 42 mView all detailsHide details
Identity
- Hole ID
- TM26-213
- Project
- Tower Mountain
- Commodity
- gold
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- TGOL
Geometry
- Grade
- 0.419
- Grade Unit
- g/t
- Intercept
- 42 m
- From
- 69 m
- To
- 111 m
- Hole Depth
- 593 m
- Intercept Depth
- 4 m
Classification
- Program
- mixed
- Sample Type
- drill
- Group ID
- TM26-213:69-111
- Mining Method
- open_pit
Location
- Easting
- 300975
- Northing
- 5377253.5
- Elevation
- 521 m
- Azimuth
- 135 °
- Dip
- -44.8 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- Activation Laboratories Ltd. and AGAT Laboratories
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Deleterious
- Deleterious Flag
- No
Compositing
- Cutoff Grade
- 0.19
- Cutoff Unit
- g/t Au
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-17T00:00:00.000Z
Reasoning: This sub-interval is above the MRE cut-off grade with good length, contributing to the extension of mineralization, despite the unknown true width.
Positive factors
- Intercept grade is above the MRE cut-off grade (0.19 g/t Au).
- Good intercept length (42.0m).
Negative factors
- True width is unknown.
Evidence · table
“0.419”
Context: 42.0
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
TM26-213Tower Mountain · goldGrade: 0.8Grade Unit: g/tIntercept: 8.9 mView all detailsHide details
Identity
- Hole ID
- TM26-213
- Project
- Tower Mountain
- Commodity
- gold
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- TGOL
Geometry
- Grade
- 0.8
- Grade Unit
- g/t
- Intercept
- 8.9 m
- From
- 242.6 m
- To
- 251.5 m
- Hole Depth
- 593 m
- Intercept Depth
- 4 m
Classification
- Program
- mixed
- Sample Type
- drill
- Group ID
- TM26-213:242.6-251.5
- Mining Method
- open_pit
Location
- Easting
- 300975
- Northing
- 5377253.5
- Elevation
- 521 m
- Azimuth
- 135 °
- Dip
- -44.8 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- Activation Laboratories Ltd. and AGAT Laboratories
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Deleterious
- Deleterious Flag
- No
Compositing
- Cutoff Grade
- 0.19
- Cutoff Unit
- g/t Au
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-17T00:00:00.000Z
Reasoning: This sub-interval shows a moderate grade above the MRE cut-off, contributing to the extension of mineralization, despite the unknown true width.
Positive factors
- Intercept grade is above the MRE cut-off grade (0.19 g/t Au).
- Moderate grade (0.8 g/t Au) for an open-pit gold deposit.
Negative factors
- True width is unknown.
Evidence · table
“0.800”
Context: 8.9
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
TM26-213Tower Mountain · goldGrade: 0.28Grade Unit: g/tIntercept: 18.7 mView all detailsHide details
Identity
- Hole ID
- TM26-213
- Project
- Tower Mountain
- Commodity
- gold
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- TGOL
Geometry
- Grade
- 0.28
- Grade Unit
- g/t
- Intercept
- 18.7 m
- From
- 273 m
- To
- 291.7 m
- Hole Depth
- 593 m
- Intercept Depth
- 4 m
Classification
- Program
- mixed
- Sample Type
- drill
- Group ID
- TM26-213:273-291.7
- Mining Method
- open_pit
Location
- Easting
- 300975
- Northing
- 5377253.5
- Elevation
- 521 m
- Azimuth
- 135 °
- Dip
- -44.8 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- Activation Laboratories Ltd. and AGAT Laboratories
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Deleterious
- Deleterious Flag
- No
Compositing
- Cutoff Grade
- 0.19
- Cutoff Unit
- g/t Au
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-17T00:00:00.000Z
Reasoning: This sub-interval is above the MRE cut-off grade, contributing to the extension of mineralization, despite the unknown true width.
Positive factors
- Intercept grade is above the MRE cut-off grade (0.19 g/t Au).
Negative factors
- True width is unknown.
Evidence · table
“0.280”
Context: 18.7
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
TM26-213Tower Mountain · goldGrade: 0.169Grade Unit: g/tIntercept: 301.3 mView all detailsHide details
Identity
- Hole ID
- TM26-213
- Project
- Tower Mountain
- Commodity
- gold
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- TGOL
Geometry
- Grade
- 0.169
- Grade Unit
- g/t
- Intercept
- 301.3 m
- From
- 291.7 m
- To
- 593 m
- Hole Depth
- 593 m
- Intercept Depth
- 4 m
Classification
- Program
- mixed
- Sample Type
- drill
- Group ID
- TM26-213:291.7-593
- Mining Method
- open_pit
Location
- Easting
- 300975
- Northing
- 5377253.5
- Elevation
- 521 m
- Azimuth
- 135 °
- Dip
- -44.8 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- Activation Laboratories Ltd. and AGAT Laboratories
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Deleterious
- Deleterious Flag
- No
Compositing
- Cutoff Grade
- 0.19
- Cutoff Unit
- g/t Au
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-17T00:00:00.000Z
Reasoning: This very long intercept has a grade below the MRE cut-off and unknown true width, limiting its immediate economic significance, despite extending mineralization.
Positive factors
- Exceptional intercept length (301.3m).
Negative factors
- Grade is below the MRE cut-off grade (0.19 g/t Au).
- True width is unknown.
Evidence · table
“0.169”
Context: 301.3
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
TM26-213Tower Mountain · goldGrade: 0.544Grade Unit: g/tIntercept: 23.1 mView all detailsHide details
Identity
- Hole ID
- TM26-213
- Project
- Tower Mountain
- Commodity
- gold
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- TGOL
Geometry
- Grade
- 0.544
- Grade Unit
- g/t
- Intercept
- 23.1 m
- From
- 291.7 m
- To
- 314.8 m
- Hole Depth
- 593 m
- Intercept Depth
- 4 m
Classification
- Program
- mixed
- Sample Type
- drill
- Group ID
- TM26-213:291.7-314.8
- Mining Method
- open_pit
Location
- Easting
- 300975
- Northing
- 5377253.5
- Elevation
- 521 m
- Azimuth
- 135 °
- Dip
- -44.8 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- Activation Laboratories Ltd. and AGAT Laboratories
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Deleterious
- Deleterious Flag
- No
Compositing
- Cutoff Grade
- 0.19
- Cutoff Unit
- g/t Au
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-17T00:00:00.000Z
Reasoning: This sub-interval shows a moderate grade above the MRE cut-off, contributing to the extension of mineralization, despite the unknown true width.
Positive factors
- Intercept grade is above the MRE cut-off grade (0.19 g/t Au).
- Moderate grade (0.544 g/t Au) for an open-pit gold deposit.
Negative factors
- True width is unknown.
Evidence · table
“0.544”
Context: 23.1
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
TM26-213Tower Mountain · goldGrade: 1.071Grade Unit: g/tIntercept: 7.3 mView all detailsHide details
Identity
- Hole ID
- TM26-213
- Project
- Tower Mountain
- Commodity
- gold
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- TGOL
Geometry
- Grade
- 1.071
- Grade Unit
- g/t
- Intercept
- 7.3 m
- From
- 307.5 m
- To
- 314.8 m
- Hole Depth
- 593 m
- Intercept Depth
- 4 m
Classification
- Program
- mixed
- Sample Type
- drill
- Group ID
- TM26-213:307.5-314.8
- Mining Method
- open_pit
Location
- Easting
- 300975
- Northing
- 5377253.5
- Elevation
- 521 m
- Azimuth
- 135 °
- Dip
- -44.8 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- Activation Laboratories Ltd. and AGAT Laboratories
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Deleterious
- Deleterious Flag
- No
Compositing
- Cutoff Grade
- 0.19
- Cutoff Unit
- g/t Au
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-17T00:00:00.000Z
Reasoning: This sub-interval shows a moderate grade above the MRE cut-off, contributing to the extension of mineralization, despite the unknown true width.
Positive factors
- Moderate grade (1.071 g/t Au) for an open-pit gold deposit.
- Intercept grade is above the MRE cut-off grade (0.19 g/t Au).
Negative factors
- True width is unknown.
Evidence · table
“1.071”
Context: 7.3
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
TM26-213Tower Mountain · goldGrade: 0.255Grade Unit: g/tIntercept: 64.5 mView all detailsHide details
Identity
- Hole ID
- TM26-213
- Project
- Tower Mountain
- Commodity
- gold
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- TGOL
Geometry
- Grade
- 0.255
- Grade Unit
- g/t
- Intercept
- 64.5 m
- From
- 314.8 m
- To
- 379.3 m
- Hole Depth
- 593 m
- Intercept Depth
- 4 m
Classification
- Program
- mixed
- Sample Type
- drill
- Group ID
- TM26-213:314.8-379.3
- Mining Method
- open_pit
Location
- Easting
- 300975
- Northing
- 5377253.5
- Elevation
- 521 m
- Azimuth
- 135 °
- Dip
- -44.8 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- Activation Laboratories Ltd. and AGAT Laboratories
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Deleterious
- Deleterious Flag
- No
Compositing
- Cutoff Grade
- 0.19
- Cutoff Unit
- g/t Au
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-17T00:00:00.000Z
Reasoning: This long intercept above the MRE cut-off grade at the pit limit indicates potential for resource expansion, despite the unknown true width.
Positive factors
- Good intercept length (64.5m).
- Intercept grade is above the MRE cut-off grade (0.19 g/t Au).
- Observed at the current pit limit, suggesting potential to expand resource.
Negative factors
- True width is unknown.
Evidence · table
“0.255”
Context: 64.5
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
TM26-213Tower Mountain · goldGrade: 0.23Grade Unit: g/tIntercept: 17.7 mView all detailsHide details
Identity
- Hole ID
- TM26-213
- Project
- Tower Mountain
- Commodity
- gold
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- TGOL
Geometry
- Grade
- 0.23
- Grade Unit
- g/t
- Intercept
- 17.7 m
- From
- 449.3 m
- To
- 467 m
- Hole Depth
- 593 m
- Intercept Depth
- 4 m
Classification
- Program
- mixed
- Sample Type
- drill
- Group ID
- TM26-213:449.3-467
- Mining Method
- open_pit
Location
- Easting
- 300975
- Northing
- 5377253.5
- Elevation
- 521 m
- Azimuth
- 135 °
- Dip
- -44.8 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- Activation Laboratories Ltd. and AGAT Laboratories
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Deleterious
- Deleterious Flag
- No
Compositing
- Cutoff Grade
- 0.19
- Cutoff Unit
- g/t Au
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-17T00:00:00.000Z
Reasoning: This sub-interval is above the MRE cut-off grade, contributing to the extension of mineralization, despite the unknown true width.
Positive factors
- Intercept grade is above the MRE cut-off grade (0.19 g/t Au).
Negative factors
- True width is unknown.
Evidence · table
“0.230”
Context: 17.7
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
TM26-213Tower Mountain · goldGrade: 0.222Grade Unit: g/tIntercept: 15.7 mView all detailsHide details
Identity
- Hole ID
- TM26-213
- Project
- Tower Mountain
- Commodity
- gold
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- TGOL
Geometry
- Grade
- 0.222
- Grade Unit
- g/t
- Intercept
- 15.7 m
- From
- 539.3 m
- To
- 555 m
- Hole Depth
- 593 m
- Intercept Depth
- 4 m
Classification
- Program
- mixed
- Sample Type
- drill
- Group ID
- TM26-213:539.3-555
- Mining Method
- open_pit
Location
- Easting
- 300975
- Northing
- 5377253.5
- Elevation
- 521 m
- Azimuth
- 135 °
- Dip
- -44.8 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- Activation Laboratories Ltd. and AGAT Laboratories
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Deleterious
- Deleterious Flag
- No
Compositing
- Cutoff Grade
- 0.19
- Cutoff Unit
- g/t Au
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-17T00:00:00.000Z
Reasoning: This sub-interval is above the MRE cut-off grade, contributing to the extension of mineralization, despite the unknown true width.
Positive factors
- Intercept grade is above the MRE cut-off grade (0.19 g/t Au).
Negative factors
- True width is unknown.
Evidence · table
“0.222”
Context: 15.7
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
TM26-213Tower Mountain · goldGrade: 0.409Grade Unit: g/tIntercept: 1.5 mView all detailsHide details
Identity
- Hole ID
- TM26-213
- Project
- Tower Mountain
- Commodity
- gold
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- TGOL
Geometry
- Grade
- 0.409
- Grade Unit
- g/t
- Intercept
- 1.5 m
- From
- 591.5 m
- To
- 593 m
- Hole Depth
- 593 m
- Intercept Depth
- 4 m
Classification
- Program
- mixed
- Sample Type
- drill
- Group ID
- TM26-213:591.5-593
- Mining Method
- open_pit
Location
- Easting
- 300975
- Northing
- 5377253.5
- Elevation
- 521 m
- Azimuth
- 135 °
- Dip
- -44.8 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- Activation Laboratories Ltd. and AGAT Laboratories
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Deleterious
- Deleterious Flag
- No
Compositing
- Cutoff Grade
- 0.19
- Cutoff Unit
- g/t Au
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-17T00:00:00.000Z
Reasoning: This sub-interval is above the MRE cut-off grade, contributing to the extension of mineralization, despite the unknown true width.
Positive factors
- Intercept grade is above the MRE cut-off grade (0.19 g/t Au).
Negative factors
- True width is unknown.
Evidence · table
“0.409”
Context: 1.5
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
Resource Estimates (2)
indicatedTower Mountain · goldTonnes: 34500000Grade: 0.46Grade Unit: g/tContained Metal: 514Contained Unit: kozHistorical resultNeeds review: historical_restatementView all detailsHide details
Identity
- Project
- Tower Mountain
- Commodity
- gold
- Region
- canada_on
- Reported Region
- Ontario
- Ticker
- TGOL
Resource scope
- Estimate type
- resource
- Reporting standards
- ni_43_101, other
- QP Signed
- Yes
- Qualified person names
- William Lewis, Charley Murahwi, Tudorel Ciuculescu
- Resource group id
- resource:f255a19e60a65a189f8f
Resource Data
- Category
- indicated
- Tonnes
- 34500000
- Grade
- 0.46
- Grade Unit
- g/t
- Contained Metal
- 514
- Contained Unit
- koz
- Cutoff Grade
- 0.19
- Cutoff Unit
- g/t Au
Prior Estimate
- Resource Date
- 2026-01-19
Lab
- Laboratory
- Activation Laboratories Ltd. and AGAT Laboratories
Review
- Needs Review
- Yes
- Review Reason
- historical_restatement
- Historical
- Yes
- Historical Source Date
- 2026-01-19T00:00:00.000Z
Dates
- Event date
- 2026-09-17T00:00:00.000Z
Reasoning: This Indicated resource, while compliant and QP signed, has a weak grade and represents a small portion of the overall resource, indicating early-stage confidence.
Positive factors
- Resource is NI 43-101 compliant and QP signed.
- Contained metal (514 koz) is moderate for gold.
Negative factors
- Grade (0.46 g/t Au) is weak for an open-pit gold deposit.
- Low M&I confidence (14.05% of total resource is Indicated).
Evidence · table
“0.46”
Context: 34.5
Tags used in scoring
Indicated Resourcepositive
Reasonable geological confidence based on adequate drilling; continuity can be assumed. Basis for Probable Reserves.
Why it applies: category is "indicated"
Cut-off Disclosedpositive
Cut-off grade used for resource reporting is clearly stated, enabling like-for-like comparison.
Why it applies: cutoff_grade is stated
QP/CP Signedpositive
Qualified Person (QP) or Competent Person (CP) named and signed off — a member of a recognized professional association (e.g., AusIMM, SME, AIG, P.Geo) with relevant experience.
Why it applies: qp_signed is true
NI 43-101 Compliantpositive
Resource estimate prepared in compliance with NI 43-101 (Canada) — high reporting standard.
Why it applies: reporting_standards includes ni_43_101
Resource Updateneutral
Revised estimate for an existing resource — compare to prior to assess progress.
Why it applies: the release compares against a previous estimate
inferredTower Mountain · goldTonnes: 211100000Grade: 0.45Grade Unit: g/tContained Metal: 3053Contained Unit: kozHistorical resultNeeds review: historical_restatementView all detailsHide details
Identity
- Project
- Tower Mountain
- Commodity
- gold
- Region
- canada_on
- Reported Region
- Ontario
- Ticker
- TGOL
Resource scope
- Estimate type
- resource
- Reporting standards
- ni_43_101, other
- QP Signed
- Yes
- Qualified person names
- William Lewis, Charley Murahwi, Tudorel Ciuculescu
- Resource group id
- resource:3f48e04b1a71b48f244e
Resource Data
- Category
- inferred
- Tonnes
- 211100000
- Grade
- 0.45
- Grade Unit
- g/t
- Contained Metal
- 3053
- Contained Unit
- koz
- Cutoff Grade
- 0.19
- Cutoff Unit
- g/t Au
Prior Estimate
- Resource Date
- 2026-01-19
Lab
- Laboratory
- Activation Laboratories Ltd. and AGAT Laboratories
Review
- Needs Review
- Yes
- Review Reason
- historical_restatement
- Historical
- Yes
- Historical Source Date
- 2026-01-19T00:00:00.000Z
Dates
- Event date
- 2026-09-17T00:00:00.000Z
Reasoning: This Inferred resource, while large in contained metal and compliant, has a weak grade and low geological confidence, limiting its immediate economic viability.
Positive factors
- Resource is NI 43-101 compliant and QP signed.
- Contained metal (3,053 koz) is exceptional for gold.
Negative factors
- Grade (0.45 g/t Au) is weak for an open-pit gold deposit.
- Resource is entirely in the Inferred category, indicating low geological confidence.
Evidence · table
“0.45”
Context: 211.1
Tags used in scoring
Inferred Resourcenegative
Speculative category — limited drilling, geological continuity assumed but not confirmed. Cannot support economic studies alone.
Why it applies: category is "inferred"
Cut-off Disclosedpositive
Cut-off grade used for resource reporting is clearly stated, enabling like-for-like comparison.
Why it applies: cutoff_grade is stated
QP/CP Signedpositive
Qualified Person (QP) or Competent Person (CP) named and signed off — a member of a recognized professional association (e.g., AusIMM, SME, AIG, P.Geo) with relevant experience.
Why it applies: qp_signed is true
NI 43-101 Compliantpositive
Resource estimate prepared in compliance with NI 43-101 (Canada) — high reporting standard.
Why it applies: reporting_standards includes ni_43_101
Resource Updateneutral
Revised estimate for an existing resource — compare to prior to assess progress.
Why it applies: the release compares against a previous estimate
How Atlas produces this analysis
Minestarters Atlas uses automated extraction to summarize mining announcements, identify reported measurements, and classify supporting evidence. Sentiment reflects the extracted narrative and classification rules; it is an interpretation, not a reported measurement. Evidence quotes and context are provided where available. Missing data, low-confidence results, and review flags indicate limitations. Check the original publisher announcement before relying on an interpretation.