Thunder Gold Intersects Continuous Gold Mineralization Averaging 1.178 g/t Au Over 102.0 Metres at Tower Mountain, Ontario
Original announcement by orestocks on
- Company
- Thunder Gold Corp.
- Ticker
- TGOL.V
- Exchange
- Unavailable
- Region
- Ontario
- Primary commodity
- Gold
- Secondary commodities
- None reported
- Document categories
- Drill results
- Extracted
- 2026-10-19 12:13:48 UTC
Analysis by Minestarters Atlas
Atlas analysis published:
Minestarters Atlas analysis
Summary
Thunder Gold announced strong infill drill results from its Tower Mountain Property in Ontario, highlighted by hole TM26-221 intersecting 1.178 g/t Au over 102.0 metres (75.7m true width). This significant intercept, along with other infill holes, confirms the continuity of gold mineralization and suggests potential for expansion beyond the current optimized pit limit. The results are reported to correlate well with and potentially improve upon the 2026 Mineral Resource Estimate.
Reasoning: Thunder Gold's latest infill drill results at Tower Mountain include a strong gold intercept of 1.178 g/t Au over 102.0 metres (75.7m true width) in hole TM26-221, which is well above the project's average grade and suggests expansion potential beyond the current pit limits. The overall infill program confirms the continuity and consistency of the mineralization, positively impacting the existing MRE.
Positive factors
- Headline intercept (TM26-221) shows strong gold grade and significant true width, exceeding project average
- Infill drilling confirms and potentially strengthens the existing Mineral Resource Estimate (MRE)
- Mineralization remains open at depth and extends outside current optimized pit limit, indicating expansion potential
- Comprehensive QA/QC procedures disclosed, including certified labs and QP sign-off
Negative factors
- True width not estimated for all reported intervals
- Reporting cut-off grade for drill intervals not explicitly stated
Facts used in scoring: 32
Classification and evidence
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: The release includes a dedicated 'Quality Assurance and Quality Control' section detailing procedures, certified labs, and QP sign-off.
Evidence · text
“Quality Assurance and Quality Control Diamond drilling utilizes NQ diameter tooling. The core is received at the on-site logging facility where it is photographed, logged for geotechnical, physical properties and geological data. Samples are identified, recorded, and cut in half by wet diamond saw. Half the core is sent for assay at an accredited laboratory with the remaining half core stored on site. A standard sample length of 1.5 meters is typically employed, varying only at major lithological contacts. Certified standards and blanks are randomly inserted into the sample stream and constitute approximately 10% of the sample stream. Certified standards and blank performance is monitored with any failures evaluated and investigated to determine if said failure is a result of error during submission. Any unexplained failures are identified and the five samples preceding and following the failure are re-assayed. Commencing in 2026, duplicate pulps are prepared at a rate of 1 in every 20 samples. The duplicate pulps are sent to a second independent analytical facility for analyses. Activation Laboratories Ltd., Thunder Bay, Ontario, ISO/IEC 17025:2017 is the primary independent analytical service provider. AGAT Laboratories, Thunder Bay, Ontario, ISO/IEC 17025:2017 is the secondary, independent analytical facility. Samples are, received, dried, crushed to 80% passing 2.0 mm. A 250-gram sample is split and pulverized. Samples are analyzed for gold using a 30-gram lead collection fire assay fusion (FA) with an atomic absorption (AAS) finish. All assay results greater than 5.0 g/t Au are re-assayed using a gravimetric analysis. All assays greater than 30.0 g/t Au are re-assayed using screen metallics where a representative 1000-gram sample is split sieved at 149µm. Assays are performed on the entire +149 µm fraction and two splits of the -149 µm fraction. A final assay is calculated based on the weight of each size fraction.”
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: The document explicitly states the drilling program consists of 'infill diamond drill results' and 'infill drill holes targeting the main B-E trend'.
Evidence · text
“Thunder Gold is pleased to announce the following exploration and infill diamond drill results from the Bench Target”
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: True width is explicitly provided for several key intervals in hole TM26-221, including the headline intercept.
Evidence · table
“75.7”
Context: 102.0
Apparent Width Onlynegative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Why it applies: For many reported intervals in Table 2.0, the 'True Width' column explicitly states 'Unknown', indicating only downhole length is provided.
Evidence · table
“Unknown”
Context: 7.5
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: The cut-off grade used for reporting the specific drill intervals in Table 2.0 is not explicitly stated, and some reported grades are below the MRE cut-off of 0.19 g/t Au.
Evidence · text
“Table 2.0 summarizes the highlights of the three holes that are the subject of this release.”
Step-Out Extensionpositive
Mineralization extended beyond the previously known limit.
Why it applies: Hole TM26-221 terminated in mineralization outside the current optimized pit limit, suggesting an extension of the mineralized zone.
Evidence · text
“TM26-221 terminated in mineralization averaging 0.785 g/t Au over 12.0 metres outside the current optimized pit limit”
Extracted facts
Stored fact records: 32. Some facts used in scoring do not have a stored record.
Drill Results (32)
TM26-216Tower Mountain · goldGrade: 0.273Grade Unit: g/tIntercept: 7.5 mView all detailsHide details
Identity
- Hole ID
- TM26-216
- Project
- Tower Mountain
- Commodity
- gold
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- TGOL.V
Geometry
- Grade
- 0.273
- Grade Unit
- g/t
- Intercept
- 7.5 m
- From
- 27 m
- To
- 34.5 m
- Hole Depth
- 351 m
- Intercept Depth
- 27 m
Classification
- Deposit Type
- orogenic
- Program
- resource
- Sample Type
- drill
- Group ID
- TM26-216:27-34.5
- Mining Method
- open_pit
Location
- Location
- Bench Target
- Easting
- 300719
- Northing
- 5377690
- Elevation
- 453.5 m
- Azimuth
- 40 °
- Dip
- -48.1 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- Activation Laboratories Ltd. and AGAT Laboratories
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-10-19T00:00:00.000Z
Reasoning: This interval shows a low gold grade, falling below the weak threshold for open pit mining, and its true width is not provided.
Negative factors
- Low gold grade for open pit mining
- True width not estimated
- Reporting cut-off grade not explicitly stated
Evidence · table
“0.273”
Context: 7.5
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
TM26-216Tower Mountain · goldGrade: 0.603Grade Unit: g/tIntercept: 1.5 mView all detailsHide details
Identity
- Hole ID
- TM26-216
- Project
- Tower Mountain
- Commodity
- gold
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- TGOL.V
Geometry
- Grade
- 0.603
- Grade Unit
- g/t
- Intercept
- 1.5 m
- From
- 67.5 m
- To
- 69 m
- Hole Depth
- 351 m
- Intercept Depth
- 27 m
Classification
- Deposit Type
- orogenic
- Program
- resource
- Sample Type
- drill
- Group ID
- TM26-216:67.5-69
- Mining Method
- open_pit
Location
- Location
- Bench Target
- Easting
- 300719
- Northing
- 5377690
- Elevation
- 453.5 m
- Azimuth
- 40 °
- Dip
- -48.1 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- Activation Laboratories Ltd. and AGAT Laboratories
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-10-19T00:00:00.000Z
Reasoning: This narrow intercept shows a moderate gold grade but its limited width reduces its overall materiality.
Negative factors
- Narrow intercept width
- True width not estimated
- Reporting cut-off grade not explicitly stated
Evidence · table
“0.603”
Context: 1.5
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
TM26-216Tower Mountain · goldGrade: 0.15Grade Unit: g/tIntercept: 270 mView all detailsHide details
Identity
- Hole ID
- TM26-216
- Project
- Tower Mountain
- Commodity
- gold
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- TGOL.V
Geometry
- Grade
- 0.15
- Grade Unit
- g/t
- Intercept
- 270 m
- From
- 81 m
- To
- 351 m
- Hole Depth
- 351 m
- Intercept Depth
- 27 m
Classification
- Deposit Type
- orogenic
- Program
- resource
- Sample Type
- drill
- Group ID
- TM26-216:81-351
- Mining Method
- open_pit
Location
- Location
- Bench Target
- Easting
- 300719
- Northing
- 5377690
- Elevation
- 453.5 m
- Azimuth
- 40 °
- Dip
- -48.1 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- Activation Laboratories Ltd. and AGAT Laboratories
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-10-19T00:00:00.000Z
Reasoning: This very wide intercept shows a very low gold grade, significantly below the weak threshold for open pit mining, despite its considerable length.
Positive factors
- Very wide continuous mineralization
Negative factors
- Very low gold grade for open pit mining
- True width not estimated
- Reporting cut-off grade not explicitly stated
Evidence · table
“0.150”
Context: 270.0
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
TM26-216Tower Mountain · goldGrade: 0.241Grade Unit: g/tIntercept: 9 mView all detailsHide details
Identity
- Hole ID
- TM26-216
- Project
- Tower Mountain
- Commodity
- gold
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- TGOL.V
Geometry
- Grade
- 0.241
- Grade Unit
- g/t
- Intercept
- 9 m
- From
- 123 m
- To
- 132 m
- Hole Depth
- 351 m
- Intercept Depth
- 27 m
Classification
- Deposit Type
- orogenic
- Program
- resource
- Sample Type
- drill
- Group ID
- TM26-216:123-132
- Mining Method
- open_pit
Location
- Location
- Bench Target
- Easting
- 300719
- Northing
- 5377690
- Elevation
- 453.5 m
- Azimuth
- 40 °
- Dip
- -48.1 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- Activation Laboratories Ltd. and AGAT Laboratories
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-10-19T00:00:00.000Z
Reasoning: This interval shows a low gold grade, below the weak threshold for open pit mining, and its true width is not provided.
Negative factors
- Low gold grade for open pit mining
- True width not estimated
- Reporting cut-off grade not explicitly stated
Evidence · table
“0.241”
Context: 9.0
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
TM26-216Tower Mountain · goldGrade: 3.48Grade Unit: g/tIntercept: 1.5 mView all detailsHide details
Identity
- Hole ID
- TM26-216
- Project
- Tower Mountain
- Commodity
- gold
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- TGOL.V
Geometry
- Grade
- 3.48
- Grade Unit
- g/t
- Intercept
- 1.5 m
- From
- 187.5 m
- To
- 189 m
- Hole Depth
- 351 m
- Intercept Depth
- 27 m
Classification
- Deposit Type
- orogenic
- Program
- resource
- Sample Type
- drill
- Group ID
- TM26-216:187.5-189
- Mining Method
- open_pit
Location
- Location
- Bench Target
- Easting
- 300719
- Northing
- 5377690
- Elevation
- 453.5 m
- Azimuth
- 40 °
- Dip
- -48.1 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- Activation Laboratories Ltd. and AGAT Laboratories
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-10-19T00:00:00.000Z
Reasoning: This narrow intercept shows a strong gold grade for open pit mining, but its limited width reduces its overall materiality.
Positive factors
- Strong gold grade for open pit mining
Negative factors
- Narrow intercept width
- True width not estimated
- Reporting cut-off grade not explicitly stated
Evidence · table
“3.480”
Context: 1.5
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
TM26-216Tower Mountain · goldGrade: 1.26Grade Unit: g/tIntercept: 1.5 mView all detailsHide details
Identity
- Hole ID
- TM26-216
- Project
- Tower Mountain
- Commodity
- gold
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- TGOL.V
Geometry
- Grade
- 1.26
- Grade Unit
- g/t
- Intercept
- 1.5 m
- From
- 202.5 m
- To
- 204 m
- Hole Depth
- 351 m
- Intercept Depth
- 27 m
Classification
- Deposit Type
- orogenic
- Program
- resource
- Sample Type
- drill
- Group ID
- TM26-216:202.5-204
- Mining Method
- open_pit
Location
- Location
- Bench Target
- Easting
- 300719
- Northing
- 5377690
- Elevation
- 453.5 m
- Azimuth
- 40 °
- Dip
- -48.1 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- Activation Laboratories Ltd. and AGAT Laboratories
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-10-19T00:00:00.000Z
Reasoning: This narrow intercept shows a moderate gold grade for open pit mining, but its limited width reduces its overall materiality.
Positive factors
- Moderate gold grade for open pit mining
Negative factors
- Narrow intercept width
- True width not estimated
- Reporting cut-off grade not explicitly stated
Evidence · table
“1.260”
Context: 1.5
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
TM26-216Tower Mountain · goldGrade: 0.217Grade Unit: g/tIntercept: 9 mView all detailsHide details
Identity
- Hole ID
- TM26-216
- Project
- Tower Mountain
- Commodity
- gold
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- TGOL.V
Geometry
- Grade
- 0.217
- Grade Unit
- g/t
- Intercept
- 9 m
- From
- 225 m
- To
- 234 m
- Hole Depth
- 351 m
- Intercept Depth
- 27 m
Classification
- Deposit Type
- orogenic
- Program
- resource
- Sample Type
- drill
- Group ID
- TM26-216:225-234
- Mining Method
- open_pit
Location
- Location
- Bench Target
- Easting
- 300719
- Northing
- 5377690
- Elevation
- 453.5 m
- Azimuth
- 40 °
- Dip
- -48.1 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- Activation Laboratories Ltd. and AGAT Laboratories
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-10-19T00:00:00.000Z
Reasoning: This interval shows a low gold grade, below the weak threshold for open pit mining, and its true width is not provided.
Negative factors
- Low gold grade for open pit mining
- True width not estimated
- Reporting cut-off grade not explicitly stated
Evidence · table
“0.217”
Context: 9.0
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
TM26-216Tower Mountain · goldGrade: 0.207Grade Unit: g/tIntercept: 25.5 mView all detailsHide details
Identity
- Hole ID
- TM26-216
- Project
- Tower Mountain
- Commodity
- gold
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- TGOL.V
Geometry
- Grade
- 0.207
- Grade Unit
- g/t
- Intercept
- 25.5 m
- From
- 243 m
- To
- 268.5 m
- Hole Depth
- 351 m
- Intercept Depth
- 27 m
Classification
- Deposit Type
- orogenic
- Program
- resource
- Sample Type
- drill
- Group ID
- TM26-216:243-268.5
- Mining Method
- open_pit
Location
- Location
- Bench Target
- Easting
- 300719
- Northing
- 5377690
- Elevation
- 453.5 m
- Azimuth
- 40 °
- Dip
- -48.1 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- Activation Laboratories Ltd. and AGAT Laboratories
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-10-19T00:00:00.000Z
Reasoning: This interval shows a low gold grade, below the weak threshold for open pit mining, despite its moderate width.
Positive factors
- Moderate intercept width
Negative factors
- Low gold grade for open pit mining
- True width not estimated
- Reporting cut-off grade not explicitly stated
Evidence · table
“0.207”
Context: 25.5
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
TM26-216Tower Mountain · goldGrade: 0.199Grade Unit: g/tIntercept: 24 mView all detailsHide details
Identity
- Hole ID
- TM26-216
- Project
- Tower Mountain
- Commodity
- gold
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- TGOL.V
Geometry
- Grade
- 0.199
- Grade Unit
- g/t
- Intercept
- 24 m
- From
- 297 m
- To
- 321 m
- Hole Depth
- 351 m
- Intercept Depth
- 27 m
Classification
- Deposit Type
- orogenic
- Program
- resource
- Sample Type
- drill
- Group ID
- TM26-216:297-321
- Mining Method
- open_pit
Location
- Location
- Bench Target
- Easting
- 300719
- Northing
- 5377690
- Elevation
- 453.5 m
- Azimuth
- 40 °
- Dip
- -48.1 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- Activation Laboratories Ltd. and AGAT Laboratories
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-10-19T00:00:00.000Z
Reasoning: This interval shows a low gold grade, below the weak threshold for open pit mining, despite its moderate width.
Positive factors
- Moderate intercept width
Negative factors
- Low gold grade for open pit mining
- True width not estimated
- Reporting cut-off grade not explicitly stated
Evidence · table
“0.199”
Context: 24.0
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
TM26-220Tower Mountain · goldGrade: 0.268Grade Unit: g/tIntercept: 296.2 mView all detailsHide details
Identity
- Hole ID
- TM26-220
- Project
- Tower Mountain
- Commodity
- gold
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- TGOL.V
Geometry
- Grade
- 0.268
- Grade Unit
- g/t
- Intercept
- 296.2 m
- From
- 3.8 m
- To
- 300 m
- Hole Depth
- 300 m
- Intercept Depth
- 3.8 m
Classification
- Deposit Type
- orogenic
- Program
- resource
- Sample Type
- drill
- Group ID
- TM26-220:3.8-300
- Mining Method
- open_pit
Location
- Location
- Bench Target
- Easting
- 300660
- Northing
- 5377601
- Elevation
- 450 m
- Azimuth
- 40 °
- Dip
- -50 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- Activation Laboratories Ltd. and AGAT Laboratories
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-10-19T00:00:00.000Z
Reasoning: This very wide intercept shows a low gold grade, just below the weak threshold for open pit mining, despite its considerable length.
Positive factors
- Very wide continuous mineralization
Negative factors
- Low gold grade for open pit mining
- True width not estimated
- Reporting cut-off grade not explicitly stated
Evidence · table
“0.268”
Context: 296.2
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
TM26-220Tower Mountain · goldGrade: 0.236Grade Unit: g/tIntercept: 15.7 mView all detailsHide details
Identity
- Hole ID
- TM26-220
- Project
- Tower Mountain
- Commodity
- gold
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- TGOL.V
Geometry
- Grade
- 0.236
- Grade Unit
- g/t
- Intercept
- 15.7 m
- From
- 3.8 m
- To
- 19.5 m
- Hole Depth
- 300 m
- Intercept Depth
- 3.8 m
Classification
- Deposit Type
- orogenic
- Program
- resource
- Sample Type
- drill
- Group ID
- TM26-220:3.8-19.5
- Mining Method
- open_pit
Location
- Location
- Bench Target
- Easting
- 300660
- Northing
- 5377601
- Elevation
- 450 m
- Azimuth
- 40 °
- Dip
- -50 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- Activation Laboratories Ltd. and AGAT Laboratories
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-10-19T00:00:00.000Z
Reasoning: This interval shows a low gold grade, below the weak threshold for open pit mining, and its true width is not provided.
Negative factors
- Low gold grade for open pit mining
- True width not estimated
- Reporting cut-off grade not explicitly stated
Evidence · table
“0.236”
Context: 15.7
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
TM26-220Tower Mountain · goldGrade: 0.072Grade Unit: g/tIntercept: 12 mView all detailsHide details
Identity
- Hole ID
- TM26-220
- Project
- Tower Mountain
- Commodity
- gold
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- TGOL.V
Geometry
- Grade
- 0.072
- Grade Unit
- g/t
- Intercept
- 12 m
- From
- 19.5 m
- To
- 31.5 m
- Hole Depth
- 300 m
- Intercept Depth
- 3.8 m
Classification
- Deposit Type
- orogenic
- Program
- resource
- Sample Type
- drill
- Group ID
- TM26-220:19.5-31.5
- Mining Method
- open_pit
Location
- Location
- Bench Target
- Easting
- 300660
- Northing
- 5377601
- Elevation
- 450 m
- Azimuth
- 40 °
- Dip
- -50 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- Activation Laboratories Ltd. and AGAT Laboratories
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-10-19T00:00:00.000Z
Reasoning: This interval shows a very low gold grade, well below the weak threshold for open pit mining, and its true width is not provided.
Negative factors
- Very low gold grade for open pit mining
- True width not estimated
- Reporting cut-off grade not explicitly stated
Evidence · table
“0.072”
Context: 12.0
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
TM26-220Tower Mountain · goldGrade: 0.551Grade Unit: g/tIntercept: 75 mView all detailsHide details
Identity
- Hole ID
- TM26-220
- Project
- Tower Mountain
- Commodity
- gold
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- TGOL.V
Geometry
- Grade
- 0.551
- Grade Unit
- g/t
- Intercept
- 75 m
- From
- 31.5 m
- To
- 106.5 m
- Hole Depth
- 300 m
- Intercept Depth
- 3.8 m
Classification
- Deposit Type
- orogenic
- Program
- resource
- Sample Type
- drill
- Group ID
- TM26-220:31.5-106.5
- Mining Method
- open_pit
Location
- Location
- Bench Target
- Easting
- 300660
- Northing
- 5377601
- Elevation
- 450 m
- Azimuth
- 40 °
- Dip
- -50 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- Activation Laboratories Ltd. and AGAT Laboratories
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-10-19T00:00:00.000Z
Reasoning: This wide intercept shows a moderate gold grade, exceeding the project's average, contributing positively to the infill program.
Positive factors
- Moderate gold grade for open pit mining
- Significant continuous width
- Exceeds project average grade
Negative factors
- True width not estimated
- Reporting cut-off grade not explicitly stated
Evidence · table
“0.551”
Context: 75.0
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
TM26-220Tower Mountain · goldGrade: 0.092Grade Unit: g/tIntercept: 10.5 mView all detailsHide details
Identity
- Hole ID
- TM26-220
- Project
- Tower Mountain
- Commodity
- gold
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- TGOL.V
Geometry
- Grade
- 0.092
- Grade Unit
- g/t
- Intercept
- 10.5 m
- From
- 106.5 m
- To
- 117 m
- Hole Depth
- 300 m
- Intercept Depth
- 3.8 m
Classification
- Deposit Type
- orogenic
- Program
- resource
- Sample Type
- drill
- Group ID
- TM26-220:106.5-117
- Mining Method
- open_pit
Location
- Location
- Bench Target
- Easting
- 300660
- Northing
- 5377601
- Elevation
- 450 m
- Azimuth
- 40 °
- Dip
- -50 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- Activation Laboratories Ltd. and AGAT Laboratories
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-10-19T00:00:00.000Z
Reasoning: This interval shows a very low gold grade, well below the weak threshold for open pit mining, and its true width is not provided.
Negative factors
- Very low gold grade for open pit mining
- True width not estimated
- Reporting cut-off grade not explicitly stated
Evidence · table
“0.092”
Context: 10.5
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
TM26-220Tower Mountain · goldGrade: 0.281Grade Unit: g/tIntercept: 18 mView all detailsHide details
Identity
- Hole ID
- TM26-220
- Project
- Tower Mountain
- Commodity
- gold
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- TGOL.V
Geometry
- Grade
- 0.281
- Grade Unit
- g/t
- Intercept
- 18 m
- From
- 117 m
- To
- 135 m
- Hole Depth
- 300 m
- Intercept Depth
- 3.8 m
Classification
- Deposit Type
- orogenic
- Program
- resource
- Sample Type
- drill
- Group ID
- TM26-220:117-135
- Mining Method
- open_pit
Location
- Location
- Bench Target
- Easting
- 300660
- Northing
- 5377601
- Elevation
- 450 m
- Azimuth
- 40 °
- Dip
- -50 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- Activation Laboratories Ltd. and AGAT Laboratories
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-10-19T00:00:00.000Z
Reasoning: This interval shows a low gold grade, just below the weak threshold for open pit mining, and its true width is not provided.
Negative factors
- Low gold grade for open pit mining
- True width not estimated
- Reporting cut-off grade not explicitly stated
Evidence · table
“0.281”
Context: 18.0
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
TM26-220Tower Mountain · goldGrade: 0.168Grade Unit: g/tIntercept: 37.5 mView all detailsHide details
Identity
- Hole ID
- TM26-220
- Project
- Tower Mountain
- Commodity
- gold
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- TGOL.V
Geometry
- Grade
- 0.168
- Grade Unit
- g/t
- Intercept
- 37.5 m
- From
- 135 m
- To
- 172.5 m
- Hole Depth
- 300 m
- Intercept Depth
- 3.8 m
Classification
- Deposit Type
- orogenic
- Program
- resource
- Sample Type
- drill
- Group ID
- TM26-220:135-172.5
- Mining Method
- open_pit
Location
- Location
- Bench Target
- Easting
- 300660
- Northing
- 5377601
- Elevation
- 450 m
- Azimuth
- 40 °
- Dip
- -50 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- Activation Laboratories Ltd. and AGAT Laboratories
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-10-19T00:00:00.000Z
Reasoning: This interval shows a low gold grade, below the weak threshold for open pit mining, despite its moderate width.
Positive factors
- Moderate intercept width
Negative factors
- Low gold grade for open pit mining
- True width not estimated
- Reporting cut-off grade not explicitly stated
Evidence · table
“0.168”
Context: 37.5
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
TM26-220Tower Mountain · goldGrade: 0.307Grade Unit: g/tIntercept: 31.5 mView all detailsHide details
Identity
- Hole ID
- TM26-220
- Project
- Tower Mountain
- Commodity
- gold
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- TGOL.V
Geometry
- Grade
- 0.307
- Grade Unit
- g/t
- Intercept
- 31.5 m
- From
- 172.5 m
- To
- 204 m
- Hole Depth
- 300 m
- Intercept Depth
- 3.8 m
Classification
- Deposit Type
- orogenic
- Program
- resource
- Sample Type
- drill
- Group ID
- TM26-220:172.5-204
- Mining Method
- open_pit
Location
- Location
- Bench Target
- Easting
- 300660
- Northing
- 5377601
- Elevation
- 450 m
- Azimuth
- 40 °
- Dip
- -50 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- Activation Laboratories Ltd. and AGAT Laboratories
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-10-19T00:00:00.000Z
Reasoning: This interval shows a weak gold grade, just above the weak threshold for open pit mining, over a moderate width.
Positive factors
- Weak gold grade for open pit mining
- Moderate intercept width
Negative factors
- True width not estimated
- Reporting cut-off grade not explicitly stated
Evidence · table
“0.307”
Context: 31.5
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
TM26-220Tower Mountain · goldGrade: 0.07Grade Unit: g/tIntercept: 61.5 mView all detailsHide details
Identity
- Hole ID
- TM26-220
- Project
- Tower Mountain
- Commodity
- gold
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- TGOL.V
Geometry
- Grade
- 0.07
- Grade Unit
- g/t
- Intercept
- 61.5 m
- From
- 204 m
- To
- 265.5 m
- Hole Depth
- 300 m
- Intercept Depth
- 3.8 m
Classification
- Deposit Type
- orogenic
- Program
- resource
- Sample Type
- drill
- Group ID
- TM26-220:204-265.5
- Mining Method
- open_pit
Location
- Location
- Bench Target
- Easting
- 300660
- Northing
- 5377601
- Elevation
- 450 m
- Azimuth
- 40 °
- Dip
- -50 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- Activation Laboratories Ltd. and AGAT Laboratories
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-10-19T00:00:00.000Z
Reasoning: This wide intercept shows a very low gold grade, well below the weak threshold for open pit mining, despite its considerable length.
Positive factors
- Significant continuous width
Negative factors
- Very low gold grade for open pit mining
- True width not estimated
- Reporting cut-off grade not explicitly stated
Evidence · table
“0.070”
Context: 61.5
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
TM26-220Tower Mountain · goldGrade: 0.21Grade Unit: g/tIntercept: 34.5 mView all detailsHide details
Identity
- Hole ID
- TM26-220
- Project
- Tower Mountain
- Commodity
- gold
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- TGOL.V
Geometry
- Grade
- 0.21
- Grade Unit
- g/t
- Intercept
- 34.5 m
- From
- 265.5 m
- To
- 300 m
- Hole Depth
- 300 m
- Intercept Depth
- 3.8 m
Classification
- Deposit Type
- orogenic
- Program
- resource
- Sample Type
- drill
- Group ID
- TM26-220:265.5-300
- Mining Method
- open_pit
Location
- Location
- Bench Target
- Easting
- 300660
- Northing
- 5377601
- Elevation
- 450 m
- Azimuth
- 40 °
- Dip
- -50 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- Activation Laboratories Ltd. and AGAT Laboratories
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-10-19T00:00:00.000Z
Reasoning: This interval shows a low gold grade, below the weak threshold for open pit mining, despite its moderate width.
Positive factors
- Moderate intercept width
Negative factors
- Low gold grade for open pit mining
- True width not estimated
- Reporting cut-off grade not explicitly stated
Evidence · table
“0.210”
Context: 34.5
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
TM26-221Tower Mountain · goldGrade: 0.027Grade Unit: g/tIntercept: 172 mView all detailsHide details
Identity
- Hole ID
- TM26-221
- Project
- Tower Mountain
- Commodity
- gold
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- TGOL.V
Geometry
- Grade
- 0.027
- Grade Unit
- g/t
- Intercept
- 172 m
- From
- 6.5 m
- To
- 178.5 m
- Hole Depth
- 450 m
- Intercept Depth
- 6.5 m
Classification
- Deposit Type
- orogenic
- Program
- resource
- Sample Type
- drill
- Group ID
- TM26-221:6.5-178.5
- Mining Method
- open_pit
Location
- Location
- Bench Target
- Easting
- 300555
- Northing
- 5377457
- Elevation
- 471 m
- Azimuth
- 40 °
- Dip
- -50.1 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- Activation Laboratories Ltd. and AGAT Laboratories
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-10-19T00:00:00.000Z
Reasoning: This very wide intercept shows an extremely low gold grade, far below any economic threshold for open pit mining, despite its considerable length.
Positive factors
- Very wide continuous mineralization
Negative factors
- Extremely low gold grade for open pit mining
- True width not estimated
- Reporting cut-off grade not explicitly stated
Evidence · table
“0.027”
Context: 172.0
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
TM26-221Tower Mountain · goldGrade: 0.903Grade Unit: g/tIntercept: 4.5 mView all detailsHide details
Identity
- Hole ID
- TM26-221
- Project
- Tower Mountain
- Commodity
- gold
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- TGOL.V
Geometry
- Grade
- 0.903
- Grade Unit
- g/t
- Intercept
- 4.5 m
- From
- 178.5 m
- To
- 183 m
- Hole Depth
- 450 m
- Intercept Depth
- 6.5 m
Classification
- Deposit Type
- orogenic
- Program
- resource
- Sample Type
- drill
- Group ID
- TM26-221:178.5-183
- Mining Method
- open_pit
Location
- Location
- Bench Target
- Easting
- 300555
- Northing
- 5377457
- Elevation
- 471 m
- Azimuth
- 40 °
- Dip
- -50.1 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- Activation Laboratories Ltd. and AGAT Laboratories
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-10-19T00:00:00.000Z
Reasoning: This narrow intercept shows a moderate gold grade for open pit mining, but its limited width reduces its overall materiality.
Positive factors
- Moderate gold grade for open pit mining
Negative factors
- Narrow intercept width
- True width not estimated
- Reporting cut-off grade not explicitly stated
Evidence · table
“0.903”
Context: 4.5
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
TM26-221Tower Mountain · goldGrade: 0.057Grade Unit: g/tIntercept: 15 mView all detailsHide details
Identity
- Hole ID
- TM26-221
- Project
- Tower Mountain
- Commodity
- gold
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- TGOL.V
Geometry
- Grade
- 0.057
- Grade Unit
- g/t
- Intercept
- 15 m
- From
- 183 m
- To
- 198 m
- Hole Depth
- 450 m
- Intercept Depth
- 6.5 m
Classification
- Deposit Type
- orogenic
- Program
- resource
- Sample Type
- drill
- Group ID
- TM26-221:183-198
- Mining Method
- open_pit
Location
- Location
- Bench Target
- Easting
- 300555
- Northing
- 5377457
- Elevation
- 471 m
- Azimuth
- 40 °
- Dip
- -50.1 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- Activation Laboratories Ltd. and AGAT Laboratories
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-10-19T00:00:00.000Z
Reasoning: This interval shows a very low gold grade, well below the weak threshold for open pit mining, and its true width is not provided.
Negative factors
- Very low gold grade for open pit mining
- True width not estimated
- Reporting cut-off grade not explicitly stated
Evidence · table
“0.057”
Context: 15.0
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
TM26-221Tower Mountain · goldGrade: 0.894Grade Unit: g/tIntercept: 159 mView all detailsHide details
Identity
- Hole ID
- TM26-221
- Project
- Tower Mountain
- Commodity
- gold
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- TGOL.V
Geometry
- Grade
- 0.894
- Grade Unit
- g/t
- Intercept
- 159 m
- True Width
- 118 m
- From
- 198 m
- To
- 357 m
- Hole Depth
- 450 m
- Intercept Depth
- 6.5 m
Classification
- Deposit Type
- orogenic
- Program
- resource
- Sample Type
- drill
- Group ID
- TM26-221:198-357
- Mining Method
- open_pit
Location
- Location
- Bench Target
- Easting
- 300555
- Northing
- 5377457
- Elevation
- 471 m
- Azimuth
- 40 °
- Dip
- -50.1 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- Activation Laboratories Ltd. and AGAT Laboratories
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-10-19T00:00:00.000Z
Reasoning: This exceptional width intercept with a moderate gold grade, exceeding the project's average, and a disclosed true width, is a highly positive result for the infill program.
Positive factors
- Moderate gold grade for open pit mining
- Exceptional continuous width
- True width disclosed
- Exceeds project average grade
Negative factors
- Reporting cut-off grade not explicitly stated
Evidence · table
“0.894”
Context: 159.0
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 118
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
TM26-221Tower Mountain · goldGrade: 0.22Grade Unit: g/tIntercept: 16.5 mView all detailsHide details
Identity
- Hole ID
- TM26-221
- Project
- Tower Mountain
- Commodity
- gold
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- TGOL.V
Geometry
- Grade
- 0.22
- Grade Unit
- g/t
- Intercept
- 16.5 m
- True Width
- 12.2 m
- From
- 198 m
- To
- 214.5 m
- Hole Depth
- 450 m
- Intercept Depth
- 6.5 m
Classification
- Deposit Type
- orogenic
- Program
- resource
- Sample Type
- drill
- Group ID
- TM26-221:198-214.5
- Mining Method
- open_pit
Location
- Location
- Bench Target
- Easting
- 300555
- Northing
- 5377457
- Elevation
- 471 m
- Azimuth
- 40 °
- Dip
- -50.1 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- Activation Laboratories Ltd. and AGAT Laboratories
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-10-19T00:00:00.000Z
Reasoning: This interval shows a low gold grade, below the weak threshold for open pit mining, despite having a disclosed true width.
Positive factors
- True width disclosed
Negative factors
- Low gold grade for open pit mining
- Reporting cut-off grade not explicitly stated
Evidence · table
“0.220”
Context: 16.5
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 12.2
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
TM26-221Tower Mountain · goldGrade: 0.646Grade Unit: g/tIntercept: 19.5 mView all detailsHide details
Identity
- Hole ID
- TM26-221
- Project
- Tower Mountain
- Commodity
- gold
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- TGOL.V
Geometry
- Grade
- 0.646
- Grade Unit
- g/t
- Intercept
- 19.5 m
- True Width
- 14.5 m
- From
- 214.5 m
- To
- 234 m
- Hole Depth
- 450 m
- Intercept Depth
- 6.5 m
Classification
- Deposit Type
- orogenic
- Program
- resource
- Sample Type
- drill
- Group ID
- TM26-221:214.5-234
- Mining Method
- open_pit
Location
- Location
- Bench Target
- Easting
- 300555
- Northing
- 5377457
- Elevation
- 471 m
- Azimuth
- 40 °
- Dip
- -50.1 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- Activation Laboratories Ltd. and AGAT Laboratories
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-10-19T00:00:00.000Z
Reasoning: This interval shows a moderate gold grade over a moderate true width, contributing positively to the infill program.
Positive factors
- Moderate gold grade for open pit mining
- Moderate intercept width
- True width disclosed
Negative factors
- Reporting cut-off grade not explicitly stated
Evidence · table
“0.646”
Context: 19.5
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 14.5
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
TM26-221Tower Mountain · goldGrade: 0.065Grade Unit: g/tIntercept: 6 mView all detailsHide details
Identity
- Hole ID
- TM26-221
- Project
- Tower Mountain
- Commodity
- gold
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- TGOL.V
Geometry
- Grade
- 0.065
- Grade Unit
- g/t
- Intercept
- 6 m
- True Width
- 4.5 m
- From
- 234 m
- To
- 240 m
- Hole Depth
- 450 m
- Intercept Depth
- 6.5 m
Classification
- Deposit Type
- orogenic
- Program
- resource
- Sample Type
- drill
- Group ID
- TM26-221:234-240
- Mining Method
- open_pit
Location
- Location
- Bench Target
- Easting
- 300555
- Northing
- 5377457
- Elevation
- 471 m
- Azimuth
- 40 °
- Dip
- -50.1 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- Activation Laboratories Ltd. and AGAT Laboratories
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-10-19T00:00:00.000Z
Reasoning: This interval shows a very low gold grade, well below the weak threshold for open pit mining, despite having a disclosed true width.
Positive factors
- True width disclosed
Negative factors
- Very low gold grade for open pit mining
- Reporting cut-off grade not explicitly stated
Evidence · table
“0.065”
Context: 6.0
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 4.5
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
TM26-221Tower Mountain · goldGrade: 0.354Grade Unit: g/tIntercept: 15 mView all detailsHide details
Identity
- Hole ID
- TM26-221
- Project
- Tower Mountain
- Commodity
- gold
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- TGOL.V
Geometry
- Grade
- 0.354
- Grade Unit
- g/t
- Intercept
- 15 m
- True Width
- 11.1 m
- From
- 240 m
- To
- 255 m
- Hole Depth
- 450 m
- Intercept Depth
- 6.5 m
Classification
- Deposit Type
- orogenic
- Program
- resource
- Sample Type
- drill
- Group ID
- TM26-221:240-255
- Mining Method
- open_pit
Location
- Location
- Bench Target
- Easting
- 300555
- Northing
- 5377457
- Elevation
- 471 m
- Azimuth
- 40 °
- Dip
- -50.1 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- Activation Laboratories Ltd. and AGAT Laboratories
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-10-19T00:00:00.000Z
Reasoning: This interval shows a weak gold grade, just above the weak threshold for open pit mining, over a moderate true width.
Positive factors
- Weak gold grade for open pit mining
- True width disclosed
Negative factors
- Reporting cut-off grade not explicitly stated
Evidence · table
“0.354”
Context: 15.0
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 11.1
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
TM26-221Tower Mountain · goldGrade: 1.178Grade Unit: g/tIntercept: 102 mView all detailsHide details
Identity
- Hole ID
- TM26-221
- Project
- Tower Mountain
- Commodity
- gold
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- TGOL.V
Geometry
- Grade
- 1.178
- Grade Unit
- g/t
- Intercept
- 102 m
- True Width
- 75.7 m
- From
- 255 m
- To
- 357 m
- Hole Depth
- 450 m
- Intercept Depth
- 6.5 m
Classification
- Deposit Type
- orogenic
- Program
- resource
- Sample Type
- drill
- Group ID
- TM26-221:255-357
- Mining Method
- open_pit
Location
- Location
- Bench Target
- Easting
- 300555
- Northing
- 5377457
- Elevation
- 471 m
- Azimuth
- 40 °
- Dip
- -50.1 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- Activation Laboratories Ltd. and AGAT Laboratories
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-10-19T00:00:00.000Z
Reasoning: This headline intercept demonstrates a strong gold grade over a substantial true width, significantly exceeding the project's average grade and indicating strong potential for resource expansion.
Positive factors
- Strong gold grade for open pit mining
- Exceptional continuous width
- True width disclosed
- Exceeds project average grade
- Suggests expansion beyond current pit limit
- Infill drilling confirms/improves MRE
Negative factors
- Reporting cut-off grade not explicitly stated
Evidence · table
“1.178”
Context: 102.0
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 75.7
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
TM26-221Tower Mountain · goldGrade: 0.036Grade Unit: g/tIntercept: 45 mView all detailsHide details
Identity
- Hole ID
- TM26-221
- Project
- Tower Mountain
- Commodity
- gold
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- TGOL.V
Geometry
- Grade
- 0.036
- Grade Unit
- g/t
- Intercept
- 45 m
- From
- 357 m
- To
- 402 m
- Hole Depth
- 450 m
- Intercept Depth
- 6.5 m
Classification
- Deposit Type
- orogenic
- Program
- resource
- Sample Type
- drill
- Group ID
- TM26-221:357-402
- Mining Method
- open_pit
Location
- Location
- Bench Target
- Easting
- 300555
- Northing
- 5377457
- Elevation
- 471 m
- Azimuth
- 40 °
- Dip
- -50.1 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- Activation Laboratories Ltd. and AGAT Laboratories
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-10-19T00:00:00.000Z
Reasoning: This interval shows an extremely low gold grade, far below any economic threshold for open pit mining, despite its moderate width.
Positive factors
- Moderate intercept width
Negative factors
- Extremely low gold grade for open pit mining
- True width not estimated
- Reporting cut-off grade not explicitly stated
Evidence · table
“0.036”
Context: 45.0
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
TM26-221Tower Mountain · goldGrade: 0.212Grade Unit: g/tIntercept: 24 mView all detailsHide details
Identity
- Hole ID
- TM26-221
- Project
- Tower Mountain
- Commodity
- gold
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- TGOL.V
Geometry
- Grade
- 0.212
- Grade Unit
- g/t
- Intercept
- 24 m
- From
- 402 m
- To
- 426 m
- Hole Depth
- 450 m
- Intercept Depth
- 6.5 m
Classification
- Deposit Type
- orogenic
- Program
- resource
- Sample Type
- drill
- Group ID
- TM26-221:402-426
- Mining Method
- open_pit
Location
- Location
- Bench Target
- Easting
- 300555
- Northing
- 5377457
- Elevation
- 471 m
- Azimuth
- 40 °
- Dip
- -50.1 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- Activation Laboratories Ltd. and AGAT Laboratories
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-10-19T00:00:00.000Z
Reasoning: This interval shows a low gold grade, below the weak threshold for open pit mining, despite its moderate width.
Positive factors
- Moderate intercept width
Negative factors
- Low gold grade for open pit mining
- True width not estimated
- Reporting cut-off grade not explicitly stated
Evidence · table
“0.212”
Context: 24.0
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
TM26-221Tower Mountain · goldGrade: 0.011Grade Unit: g/tIntercept: 12 mView all detailsHide details
Identity
- Hole ID
- TM26-221
- Project
- Tower Mountain
- Commodity
- gold
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- TGOL.V
Geometry
- Grade
- 0.011
- Grade Unit
- g/t
- Intercept
- 12 m
- From
- 426 m
- To
- 438 m
- Hole Depth
- 450 m
- Intercept Depth
- 6.5 m
Classification
- Deposit Type
- orogenic
- Program
- resource
- Sample Type
- drill
- Group ID
- TM26-221:426-438
- Mining Method
- open_pit
Location
- Location
- Bench Target
- Easting
- 300555
- Northing
- 5377457
- Elevation
- 471 m
- Azimuth
- 40 °
- Dip
- -50.1 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- Activation Laboratories Ltd. and AGAT Laboratories
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-10-19T00:00:00.000Z
Reasoning: This interval shows an extremely low gold grade, far below any economic threshold for open pit mining, and its true width is not provided.
Negative factors
- Extremely low gold grade for open pit mining
- True width not estimated
- Reporting cut-off grade not explicitly stated
Evidence · table
“0.011”
Context: 12.0
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
TM26-221Tower Mountain · goldGrade: 0.785Grade Unit: g/tIntercept: 12 mView all detailsHide details
Identity
- Hole ID
- TM26-221
- Project
- Tower Mountain
- Commodity
- gold
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- TGOL.V
Geometry
- Grade
- 0.785
- Grade Unit
- g/t
- Intercept
- 12 m
- From
- 438 m
- To
- 450 m
- Hole Depth
- 450 m
- Intercept Depth
- 6.5 m
Classification
- Deposit Type
- orogenic
- Program
- resource
- Sample Type
- drill
- Group ID
- TM26-221:438-450
- Mining Method
- open_pit
Location
- Location
- Bench Target
- Easting
- 300555
- Northing
- 5377457
- Elevation
- 471 m
- Azimuth
- 40 °
- Dip
- -50.1 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- Activation Laboratories Ltd. and AGAT Laboratories
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-10-19T00:00:00.000Z
Reasoning: This interval shows a moderate gold grade at the end of the hole, indicating potential for further mineralization beyond the current drill depth and pit limits.
Positive factors
- Moderate gold grade for open pit mining
- Hole terminated in mineralization
- Suggests expansion beyond current pit limit
Negative factors
- True width not estimated
- Reporting cut-off grade not explicitly stated
Evidence · table
“0.785”
Context: 12.0
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
How Atlas produces this analysis
Minestarters Atlas uses automated extraction to summarize mining announcements, identify reported measurements, and classify supporting evidence. Sentiment reflects the extracted narrative and classification rules; it is an interpretation, not a reported measurement. Evidence quotes and context are provided where available. Missing data, low-confidence results, and review flags indicate limitations. Check the original publisher announcement before relying on an interpretation.