Thunder Gold Intersects 409.5 Metres Averaging 0.307 g/t Au (Including 111.0 Metres Averaging 0.514 g/t Au) at Tower Mountain
Original announcement by orestocks on
- Company
- Thunder Gold Corp.
- Ticker
- TGOL.V
- Exchange
- Unavailable
- Region
- Ontario
- Primary commodity
- Gold
- Secondary commodities
- None reported
- Document categories
- Drill results
- Extracted
- 2026-09-22 12:05:33 UTC
Analysis by Minestarters Atlas
Atlas analysis published:
Minestarters Atlas analysis
Summary
Thunder Gold Corp. announced infill drill results from its Tower Mountain Property in Ontario, with a highlight intercept of 409.5 metres averaging 0.307 g/t Au, including 111.0 metres at 0.514 g/t Au in hole TM26-214. The drilling is focused on resource conversion, and the company reports that actual drilled grades collectively exceed predicted model grades by 10%, despite some individual holes underperforming. All technical information has been reviewed by a Qualified Person, and comprehensive QA/QC procedures are in place.
Reasoning: The drill results, while generally lower grade than the project average, are part of a resource conversion program and are reported to exceed predicted model grades in some areas, which is positive for model validation and de-risking. Long intercepts are material, and QA/QC is robust, but the lack of true width disclosure for most intervals and some underperforming holes temper enthusiasm.
Positive factors
- Long intercepts of gold mineralization, including a headline intercept of 409.5m at 0.307 g/t Au.
- Drilling is focused on resource conversion, aiming to upgrade Inferred resources to Indicated.
- Company states that actual drilled grades collectively exceed predicted model grades by 10%, validating the geological model.
- Good QA/QC disclosure with certified labs and QP sign-off.
Negative factors
- Most reported grades are below the project's historical average grade of 0.802 g/t Au and the current MRE grades (0.46 g/t Au Indicated, 0.45 g/t Au Inferred).
- One hole (TM26-212) intersected 26% less gold than the model predicted in its upper portion, and another (TM26-214) was 38% below model prediction over its full length.
- True widths are largely unknown for most reported intercepts, which may overstate actual thickness.
Low confidence — this extraction should be reviewed alongside the original source.
Facts used in scoring: 21
Classification and evidence
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: The release details QA/QC procedures including certified labs (Activation Laboratories Ltd. and AGAT Laboratories, both ISO/IEC 17025:2017), insertion of standards and blanks, duplicate pulps, and QP sign-off by Wes Hanson, P.Geo.
Evidence · text
“Activation Laboratories Ltd., Thunder Bay, Ontario, ISO/IEC 17025:2017 is the primary independent analytical service provider. AGAT Laboratories, Thunder Bay, Ontario, ISO/IEC 17025:2017 is the secondary, independent analytical facility. Technical information in this news release has been reviewed and approved by Wes Hanson, P.Geo., President and CEO of Thunder Gold Corp., who is a Qualified Person under the definitions established by NI 43-101.”
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: The drilling is explicitly described as 'infill diamond drill results' and 'resource conversion' targeting a large block of Inferred Resource with the objective of upgrading it to Indicated.
Evidence · text
“Thunder Gold Corp. is pleased to announce the following infill diamond drill results from the Bench Target... TM26-214 was designed to crosscut the Bench Target. This hole specifically targeted a large block of Inferred Resource with the objective of upgrading the Inferred Resource to the Indicated Resource classification”
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: True width is estimated and provided for hole TM26-214 (e.g., 496.0m @ 0.271 g/t Au with a true width of 230.1m).
Evidence · table
“230.1”
Context: 496.0
Apparent Width Onlynegative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Why it applies: For holes TM26-211 and TM26-212, and many sub-intervals, the true width is explicitly stated as 'Unknown'.
Evidence · table
“Unknown”
Context: 396.0
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: While the MRE cut-off grade of 0.19 g/t Au is mentioned in the context of the MRE, the specific cut-off grade used for compositing the reported drill intervals is not explicitly stated.
Evidence · text
“scattered intervals greater than the current MRE cut-off grade (Reference Table 2.0).”
Extracted facts
Stored fact records: 21. Some facts used in scoring do not have a stored record.
Drill Results (21)
TM26-211Tower Mountain · goldGrade: 0.11Grade Unit: g/tIntercept: 396 mView all detailsHide details
Identity
- Hole ID
- TM26-211
- Project
- Tower Mountain
- Commodity
- gold
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- TGOL.V
Geometry
- Grade
- 0.11
- Grade Unit
- g/t
- Intercept
- 396 m
- From
- 6 m
- To
- 402 m
- Hole Depth
- 402 m
- Intercept Depth
- 6 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- TM26-211:6-402
- Mining Method
- open_pit
Location
- Location
- Bench Target
- Easting
- 300798
- Northing
- 5377244
- Elevation
- 511 m
- Azimuth
- 40 °
- Dip
- -64.9 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- Activation Laboratories Ltd. and AGAT Laboratories
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Deleterious
- Deleterious Flag
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-22T00:00:00.000Z
Reasoning: This long intercept, while low grade, exceeded the model's prediction for a 'waste' area, which is a positive for model validation in a resource conversion program. However, the grade is still low and true width is unknown.
Positive factors
- Long intercept of 396.0 metres, indicating broad mineralization.
- Drilling is part of a resource conversion program.
Negative factors
- Grade of 0.110 g/t Au is below the project's average and MRE grades, though above the 0.093 g/t Au predicted for this 'waste' area.
- True width is unknown, potentially overstating the actual thickness.
Evidence · table
“0.110”
Context: 396.0
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
TM26-211Tower Mountain · goldGrade: 0.235Grade Unit: g/tIntercept: 25.5 mView all detailsHide details
Identity
- Hole ID
- TM26-211
- Project
- Tower Mountain
- Commodity
- gold
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- TGOL.V
Geometry
- Grade
- 0.235
- Grade Unit
- g/t
- Intercept
- 25.5 m
- From
- 91.5 m
- To
- 117 m
- Hole Depth
- 402 m
- Intercept Depth
- 6 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- TM26-211:91.5-117
- Mining Method
- open_pit
Location
- Location
- Bench Target
- Easting
- 300798
- Northing
- 5377244
- Elevation
- 511 m
- Azimuth
- 40 °
- Dip
- -64.9 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- Activation Laboratories Ltd. and AGAT Laboratories
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Deleterious
- Deleterious Flag
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-22T00:00:00.000Z
Reasoning: This sub-interval shows a moderate grade above the cut-off, contributing to the resource conversion efforts, but its true width is not stated.
Positive factors
- Grade of 0.235 g/t Au is above the MRE cut-off grade of 0.19 g/t Au.
- Part of a resource conversion program.
Negative factors
- True width is unknown, potentially overstating the actual thickness.
Evidence · table
“0.235”
Context: 25.5
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
TM26-211Tower Mountain · goldGrade: 0.184Grade Unit: g/tIntercept: 12 mView all detailsHide details
Identity
- Hole ID
- TM26-211
- Project
- Tower Mountain
- Commodity
- gold
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- TGOL.V
Geometry
- Grade
- 0.184
- Grade Unit
- g/t
- Intercept
- 12 m
- From
- 210 m
- To
- 222 m
- Hole Depth
- 402 m
- Intercept Depth
- 6 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- TM26-211:210-222
- Mining Method
- open_pit
Location
- Location
- Bench Target
- Easting
- 300798
- Northing
- 5377244
- Elevation
- 511 m
- Azimuth
- 40 °
- Dip
- -64.9 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- Activation Laboratories Ltd. and AGAT Laboratories
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Deleterious
- Deleterious Flag
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-22T00:00:00.000Z
Reasoning: This intercept is marginally below the cut-off grade and its true width is unknown, making its contribution to resource conversion limited.
Positive factors
- Part of a resource conversion program.
Negative factors
- Grade of 0.184 g/t Au is slightly below the MRE cut-off grade of 0.19 g/t Au.
- True width is unknown, potentially overstating the actual thickness.
Evidence · table
“0.184”
Context: 12.0
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
TM26-211Tower Mountain · goldGrade: 0.347Grade Unit: g/tIntercept: 40.5 mView all detailsHide details
Identity
- Hole ID
- TM26-211
- Project
- Tower Mountain
- Commodity
- gold
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- TGOL.V
Geometry
- Grade
- 0.347
- Grade Unit
- g/t
- Intercept
- 40.5 m
- From
- 256.5 m
- To
- 297 m
- Hole Depth
- 402 m
- Intercept Depth
- 6 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- TM26-211:256.5-297
- Mining Method
- open_pit
Location
- Location
- Bench Target
- Easting
- 300798
- Northing
- 5377244
- Elevation
- 511 m
- Azimuth
- 40 °
- Dip
- -64.9 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- Activation Laboratories Ltd. and AGAT Laboratories
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Deleterious
- Deleterious Flag
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-22T00:00:00.000Z
Reasoning: This intercept shows a good grade over a moderate width, contributing positively to resource conversion efforts, but its true width is not stated.
Positive factors
- Grade of 0.347 g/t Au is above the MRE cut-off grade of 0.19 g/t Au.
- Intercept length of 40.5 metres is significant.
- Part of a resource conversion program.
Negative factors
- True width is unknown, potentially overstating the actual thickness.
Evidence · table
“0.347”
Context: 40.5
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
TM26-211Tower Mountain · goldGrade: 0.215Grade Unit: g/tIntercept: 12 mView all detailsHide details
Identity
- Hole ID
- TM26-211
- Project
- Tower Mountain
- Commodity
- gold
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- TGOL.V
Geometry
- Grade
- 0.215
- Grade Unit
- g/t
- Intercept
- 12 m
- From
- 369 m
- To
- 381 m
- Hole Depth
- 402 m
- Intercept Depth
- 6 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- TM26-211:369-381
- Mining Method
- open_pit
Location
- Location
- Bench Target
- Easting
- 300798
- Northing
- 5377244
- Elevation
- 511 m
- Azimuth
- 40 °
- Dip
- -64.9 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- Activation Laboratories Ltd. and AGAT Laboratories
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Deleterious
- Deleterious Flag
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-22T00:00:00.000Z
Reasoning: This intercept shows a moderate grade above the cut-off, contributing to resource conversion efforts, but its true width is not stated.
Positive factors
- Grade of 0.215 g/t Au is above the MRE cut-off grade of 0.19 g/t Au.
- Part of a resource conversion program.
Negative factors
- True width is unknown, potentially overstating the actual thickness.
Evidence · table
“0.215”
Context: 12.0
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
TM26-212Tower Mountain · goldGrade: 0.194Grade Unit: g/tIntercept: 592.5 mView all detailsHide details
Identity
- Hole ID
- TM26-212
- Project
- Tower Mountain
- Commodity
- gold
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- TGOL.V
Geometry
- Grade
- 0.194
- Grade Unit
- g/t
- Intercept
- 592.5 m
- From
- 7.5 m
- To
- 600 m
- Hole Depth
- 600 m
- Intercept Depth
- 7.5 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- TM26-212:7.5-600
- Mining Method
- open_pit
Location
- Location
- Bench Target
- Easting
- 300674
- Northing
- 5377170
- Elevation
- 502 m
- Azimuth
- 40 °
- Dip
- -49.6 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- Activation Laboratories Ltd. and AGAT Laboratories
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Deleterious
- Deleterious Flag
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-22T00:00:00.000Z
Reasoning: This very long intercept, while at the cut-off grade and underperforming the model prediction for the full length, still contributes to resource conversion. The true width is unknown.
Positive factors
- Very long intercept of 592.5 metres, indicating extensive mineralization.
- Part of a resource conversion program.
Negative factors
- Grade of 0.194 g/t Au is at the MRE cut-off grade of 0.19 g/t Au, and 26% less than the model predicted for the full interval.
- True width is unknown, potentially overstating the actual thickness.
Evidence · table
“0.194”
Context: 592.5
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
TM26-212Tower Mountain · goldGrade: 0.06Grade Unit: g/tIntercept: 369 mView all detailsHide details
Identity
- Hole ID
- TM26-212
- Project
- Tower Mountain
- Commodity
- gold
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- TGOL.V
Geometry
- Grade
- 0.06
- Grade Unit
- g/t
- Intercept
- 369 m
- From
- 7.5 m
- To
- 376.5 m
- Hole Depth
- 600 m
- Intercept Depth
- 7.5 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- TM26-212:7.5-376.5
- Mining Method
- open_pit
Location
- Location
- Bench Target
- Easting
- 300674
- Northing
- 5377170
- Elevation
- 502 m
- Azimuth
- 40 °
- Dip
- -49.6 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- Activation Laboratories Ltd. and AGAT Laboratories
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Deleterious
- Deleterious Flag
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-22T00:00:00.000Z
Reasoning: This very long intercept is significantly below the cut-off grade and contributed to the overall underperformance of the hole against the model, indicating lower-grade material in this section.
Positive factors
- Long intercept of 369.0 metres.
Negative factors
- Grade of 0.060 g/t Au is well below the MRE cut-off grade of 0.19 g/t Au.
- This interval contributed to the hole underperforming the model prediction.
- True width is unknown, potentially overstating the actual thickness.
Evidence · table
“0.060”
Context: 369.0
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
TM26-212Tower Mountain · goldGrade: 0.343Grade Unit: g/tIntercept: 13.5 mView all detailsHide details
Identity
- Hole ID
- TM26-212
- Project
- Tower Mountain
- Commodity
- gold
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- TGOL.V
Geometry
- Grade
- 0.343
- Grade Unit
- g/t
- Intercept
- 13.5 m
- From
- 75 m
- To
- 88.5 m
- Hole Depth
- 600 m
- Intercept Depth
- 7.5 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- TM26-212:75-88.5
- Mining Method
- open_pit
Location
- Location
- Bench Target
- Easting
- 300674
- Northing
- 5377170
- Elevation
- 502 m
- Azimuth
- 40 °
- Dip
- -49.6 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- Activation Laboratories Ltd. and AGAT Laboratories
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Deleterious
- Deleterious Flag
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-22T00:00:00.000Z
Reasoning: This intercept shows a good grade over a narrow width, contributing to resource conversion efforts, but its true width is not stated.
Positive factors
- Grade of 0.343 g/t Au is above the MRE cut-off grade of 0.19 g/t Au.
- Part of a resource conversion program.
Negative factors
- True width is unknown, potentially overstating the actual thickness.
Evidence · table
“0.343”
Context: 13.5
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
TM26-212Tower Mountain · goldGrade: 0.346Grade Unit: g/tIntercept: 15.5 mView all detailsHide details
Identity
- Hole ID
- TM26-212
- Project
- Tower Mountain
- Commodity
- gold
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- TGOL.V
Geometry
- Grade
- 0.346
- Grade Unit
- g/t
- Intercept
- 15.5 m
- From
- 236 m
- To
- 251.5 m
- Hole Depth
- 600 m
- Intercept Depth
- 7.5 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- TM26-212:236-251.5
- Mining Method
- open_pit
Location
- Location
- Bench Target
- Easting
- 300674
- Northing
- 5377170
- Elevation
- 502 m
- Azimuth
- 40 °
- Dip
- -49.6 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- Activation Laboratories Ltd. and AGAT Laboratories
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Deleterious
- Deleterious Flag
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-22T00:00:00.000Z
Reasoning: This intercept shows a good grade over a narrow width, contributing to resource conversion efforts, but its true width is not stated.
Positive factors
- Grade of 0.346 g/t Au is above the MRE cut-off grade of 0.19 g/t Au.
- Part of a resource conversion program.
Negative factors
- True width is unknown, potentially overstating the actual thickness.
Evidence · table
“0.346”
Context: 15.5
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
TM26-212Tower Mountain · goldGrade: 0.283Grade Unit: g/tIntercept: 223.5 mView all detailsHide details
Identity
- Hole ID
- TM26-212
- Project
- Tower Mountain
- Commodity
- gold
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- TGOL.V
Geometry
- Grade
- 0.283
- Grade Unit
- g/t
- Intercept
- 223.5 m
- From
- 376.5 m
- To
- 600 m
- Hole Depth
- 600 m
- Intercept Depth
- 7.5 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- TM26-212:376.5-600
- Mining Method
- open_pit
Location
- Location
- Bench Target
- Easting
- 300674
- Northing
- 5377170
- Elevation
- 502 m
- Azimuth
- 40 °
- Dip
- -49.6 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- Activation Laboratories Ltd. and AGAT Laboratories
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Deleterious
- Deleterious Flag
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-22T00:00:00.000Z
Reasoning: This long, moderate-grade intercept is positive as it exceeded model predictions at depth, supporting resource conversion and potential for deeper mineralization.
Positive factors
- Long intercept of 223.5 metres at a grade of 0.283 g/t Au, above the MRE cut-off grade.
- This interval exceeded model predictions, indicating potential for resource upside at depth.
- Part of a resource conversion program.
Negative factors
- True width is unknown, potentially overstating the actual thickness.
Evidence · table
“0.283”
Context: 223.5
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
TM26-212Tower Mountain · goldGrade: 0.19Grade Unit: g/tIntercept: 136.5 mView all detailsHide details
Identity
- Hole ID
- TM26-212
- Project
- Tower Mountain
- Commodity
- gold
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- TGOL.V
Geometry
- Grade
- 0.19
- Grade Unit
- g/t
- Intercept
- 136.5 m
- From
- 376.5 m
- To
- 513 m
- Hole Depth
- 600 m
- Intercept Depth
- 7.5 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- TM26-212:376.5-513
- Mining Method
- open_pit
Location
- Location
- Bench Target
- Easting
- 300674
- Northing
- 5377170
- Elevation
- 502 m
- Azimuth
- 40 °
- Dip
- -49.6 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- Activation Laboratories Ltd. and AGAT Laboratories
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Deleterious
- Deleterious Flag
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-22T00:00:00.000Z
Reasoning: This long intercept at the cut-off grade contributes to resource conversion, but its true width is unknown.
Positive factors
- Long intercept of 136.5 metres.
- Grade of 0.190 g/t Au is at the MRE cut-off grade of 0.19 g/t Au.
- Part of a resource conversion program.
Negative factors
- True width is unknown, potentially overstating the actual thickness.
Evidence · table
“0.190”
Context: 136.5
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
TM26-212Tower Mountain · goldGrade: 0.442Grade Unit: g/tIntercept: 84 mView all detailsHide details
Identity
- Hole ID
- TM26-212
- Project
- Tower Mountain
- Commodity
- gold
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- TGOL.V
Geometry
- Grade
- 0.442
- Grade Unit
- g/t
- Intercept
- 84 m
- From
- 513 m
- To
- 597 m
- Hole Depth
- 600 m
- Intercept Depth
- 7.5 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- TM26-212:513-597
- Mining Method
- open_pit
Location
- Location
- Bench Target
- Easting
- 300674
- Northing
- 5377170
- Elevation
- 502 m
- Azimuth
- 40 °
- Dip
- -49.6 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- Activation Laboratories Ltd. and AGAT Laboratories
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Deleterious
- Deleterious Flag
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-22T00:00:00.000Z
Reasoning: This is a strong intercept with good grade over a substantial width, exceeding model predictions at depth and positively contributing to resource conversion.
Positive factors
- Strong grade of 0.442 g/t Au over a significant length of 84.0 metres.
- Grade is close to the MRE average and significantly above the cut-off.
- This interval exceeded model predictions, indicating potential for resource upside at depth.
- Part of a resource conversion program.
Negative factors
- True width is unknown, potentially overstating the actual thickness.
Evidence · table
“0.442”
Context: 84.0
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
TM26-212Tower Mountain · goldGrade: 0.085Grade Unit: g/tIntercept: 3 mView all detailsHide details
Identity
- Hole ID
- TM26-212
- Project
- Tower Mountain
- Commodity
- gold
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- TGOL.V
Geometry
- Grade
- 0.085
- Grade Unit
- g/t
- Intercept
- 3 m
- From
- 597 m
- To
- 600 m
- Hole Depth
- 600 m
- Intercept Depth
- 7.5 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- TM26-212:597-600
- Mining Method
- open_pit
Location
- Location
- Bench Target
- Easting
- 300674
- Northing
- 5377170
- Elevation
- 502 m
- Azimuth
- 40 °
- Dip
- -49.6 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- Activation Laboratories Ltd. and AGAT Laboratories
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Deleterious
- Deleterious Flag
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-22T00:00:00.000Z
Reasoning: This short, low-grade intercept is below the cut-off grade and has limited impact on resource conversion.
Positive factors
- Part of a resource conversion program.
Negative factors
- Grade of 0.085 g/t Au is well below the MRE cut-off grade of 0.19 g/t Au.
- True width is unknown, potentially overstating the actual thickness.
Evidence · table
“0.085”
Context: 3.0
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
TM26-214Tower Mountain · goldGrade: 0.271Grade Unit: g/tIntercept: 496 mView all detailsHide details
Identity
- Hole ID
- TM26-214
- Project
- Tower Mountain
- Commodity
- gold
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- TGOL.V
Geometry
- Grade
- 0.271
- Grade Unit
- g/t
- Intercept
- 496 m
- True Width
- 230.1 m
- From
- 5 m
- To
- 501 m
- Hole Depth
- 501 m
- Intercept Depth
- 5 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- TM26-214:5-501
- Mining Method
- open_pit
Location
- Location
- Bench Target
- Easting
- 300805
- Northing
- 5377391
- Elevation
- 487.7 m
- Azimuth
- 60 °
- Dip
- -50 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- Activation Laboratories Ltd. and AGAT Laboratories
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Deleterious
- Deleterious Flag
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-22T00:00:00.000Z
Reasoning: This very long intercept with a stated true width is material for resource conversion, despite the grade being lower than predicted by the model.
Positive factors
- Very long intercept of 496.0 metres at a grade of 0.271 g/t Au, above the MRE cut-off grade.
- True width of 230.1 metres is stated, indicating significant width.
- Part of a resource conversion program.
Negative factors
- Grade is 38% less than the model predicted for this interval.
Evidence · table
“0.271”
Context: 496.0
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 230.1
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
TM26-214Tower Mountain · goldGrade: 0.307Grade Unit: g/tIntercept: 409.5 mView all detailsHide details
Identity
- Hole ID
- TM26-214
- Project
- Tower Mountain
- Commodity
- gold
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- TGOL.V
Geometry
- Grade
- 0.307
- Grade Unit
- g/t
- Intercept
- 409.5 m
- True Width
- 190 m
- From
- 21 m
- To
- 430.5 m
- Hole Depth
- 501 m
- Intercept Depth
- 5 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- TM26-214:21-430.5
- Mining Method
- open_pit
Location
- Location
- Bench Target
- Easting
- 300805
- Northing
- 5377391
- Elevation
- 487.7 m
- Azimuth
- 60 °
- Dip
- -50 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- Activation Laboratories Ltd. and AGAT Laboratories
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Deleterious
- Deleterious Flag
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-22T00:00:00.000Z
Reasoning: This is a highly material intercept due to its exceptional length, good grade, and confirmed true width, strongly supporting resource conversion efforts.
Positive factors
- Exceptional length of 409.5 metres at a good grade of 0.307 g/t Au, well above the MRE cut-off grade.
- True width of 190.0 metres is stated, confirming significant width.
- Part of a resource conversion program.
Evidence · table
“0.307”
Context: 409.5
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 190
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
TM26-214Tower Mountain · goldGrade: 0.306Grade Unit: g/tIntercept: 30 mView all detailsHide details
Identity
- Hole ID
- TM26-214
- Project
- Tower Mountain
- Commodity
- gold
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- TGOL.V
Geometry
- Grade
- 0.306
- Grade Unit
- g/t
- Intercept
- 30 m
- True Width
- 13.9 m
- From
- 21 m
- To
- 51 m
- Hole Depth
- 501 m
- Intercept Depth
- 5 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- TM26-214:21-51
- Mining Method
- open_pit
Location
- Location
- Bench Target
- Easting
- 300805
- Northing
- 5377391
- Elevation
- 487.7 m
- Azimuth
- 60 °
- Dip
- -50 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- Activation Laboratories Ltd. and AGAT Laboratories
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Deleterious
- Deleterious Flag
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-22T00:00:00.000Z
Reasoning: This intercept shows a good grade over a moderate width with a stated true width, contributing positively to resource conversion.
Positive factors
- Good grade of 0.306 g/t Au over a moderate length, above the MRE cut-off grade.
- True width of 13.9 metres is stated.
- Part of a resource conversion program.
Evidence · table
“0.306”
Context: 30.0
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 13.9
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
TM26-214Tower Mountain · goldGrade: 0.177Grade Unit: g/tIntercept: 127.5 mView all detailsHide details
Identity
- Hole ID
- TM26-214
- Project
- Tower Mountain
- Commodity
- gold
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- TGOL.V
Geometry
- Grade
- 0.177
- Grade Unit
- g/t
- Intercept
- 127.5 m
- True Width
- 59.2 m
- From
- 51 m
- To
- 178.5 m
- Hole Depth
- 501 m
- Intercept Depth
- 5 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- TM26-214:51-178.5
- Mining Method
- open_pit
Location
- Location
- Bench Target
- Easting
- 300805
- Northing
- 5377391
- Elevation
- 487.7 m
- Azimuth
- 60 °
- Dip
- -50 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- Activation Laboratories Ltd. and AGAT Laboratories
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Deleterious
- Deleterious Flag
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-22T00:00:00.000Z
Reasoning: This long intercept, while slightly below the cut-off grade, provides significant width information and contributes to the overall understanding for resource conversion.
Positive factors
- Long intercept of 127.5 metres with a stated true width of 59.2 metres.
- Part of a resource conversion program.
Negative factors
- Grade of 0.177 g/t Au is slightly below the MRE cut-off grade of 0.19 g/t Au.
Evidence · table
“0.177”
Context: 127.5
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 59.2
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
TM26-214Tower Mountain · goldGrade: 0.28Grade Unit: g/tIntercept: 130.5 mView all detailsHide details
Identity
- Hole ID
- TM26-214
- Project
- Tower Mountain
- Commodity
- gold
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- TGOL.V
Geometry
- Grade
- 0.28
- Grade Unit
- g/t
- Intercept
- 130.5 m
- True Width
- 60.6 m
- From
- 178.5 m
- To
- 309 m
- Hole Depth
- 501 m
- Intercept Depth
- 5 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- TM26-214:178.5-309
- Mining Method
- open_pit
Location
- Location
- Bench Target
- Easting
- 300805
- Northing
- 5377391
- Elevation
- 487.7 m
- Azimuth
- 60 °
- Dip
- -50 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- Activation Laboratories Ltd. and AGAT Laboratories
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Deleterious
- Deleterious Flag
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-22T00:00:00.000Z
Reasoning: This long intercept with good grade and stated true width is positive for resource conversion efforts.
Positive factors
- Long intercept of 130.5 metres at a good grade of 0.280 g/t Au, above the MRE cut-off grade.
- True width of 60.6 metres is stated, confirming significant width.
- Part of a resource conversion program.
Evidence · table
“0.280”
Context: 130.5
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 60.6
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
TM26-214Tower Mountain · goldGrade: 0.038Grade Unit: g/tIntercept: 10.5 mView all detailsHide details
Identity
- Hole ID
- TM26-214
- Project
- Tower Mountain
- Commodity
- gold
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- TGOL.V
Geometry
- Grade
- 0.038
- Grade Unit
- g/t
- Intercept
- 10.5 m
- True Width
- 4.9 m
- From
- 309 m
- To
- 319.5 m
- Hole Depth
- 501 m
- Intercept Depth
- 5 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- TM26-214:309-319.5
- Mining Method
- open_pit
Location
- Location
- Bench Target
- Easting
- 300805
- Northing
- 5377391
- Elevation
- 487.7 m
- Azimuth
- 60 °
- Dip
- -50 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- Activation Laboratories Ltd. and AGAT Laboratories
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Deleterious
- Deleterious Flag
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-22T00:00:00.000Z
Reasoning: This short, very low-grade intercept is below the cut-off grade, limiting its positive impact on resource conversion.
Positive factors
- True width of 4.9 metres is stated.
- Part of a resource conversion program.
Negative factors
- Grade of 0.038 g/t Au is well below the MRE cut-off grade of 0.19 g/t Au.
Evidence · table
“0.038”
Context: 10.5
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 4.9
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
TM26-214Tower Mountain · goldGrade: 0.514Grade Unit: g/tIntercept: 111 mView all detailsHide details
Identity
- Hole ID
- TM26-214
- Project
- Tower Mountain
- Commodity
- gold
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- TGOL.V
Geometry
- Grade
- 0.514
- Grade Unit
- g/t
- Intercept
- 111 m
- True Width
- 51.5 m
- From
- 319.5 m
- To
- 430.5 m
- Hole Depth
- 501 m
- Intercept Depth
- 5 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- TM26-214:319.5-430.5
- Mining Method
- open_pit
Location
- Location
- Bench Target
- Easting
- 300805
- Northing
- 5377391
- Elevation
- 487.7 m
- Azimuth
- 60 °
- Dip
- -50 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- Activation Laboratories Ltd. and AGAT Laboratories
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Deleterious
- Deleterious Flag
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-22T00:00:00.000Z
Reasoning: This is a strong and material intercept with good grade and significant true width, positively contributing to resource conversion and potentially upgrading resources.
Positive factors
- Strong grade of 0.514 g/t Au over a significant length of 111.0 metres, exceeding the MRE average grade.
- True width of 51.5 metres is stated, confirming significant width.
- Part of a resource conversion program.
Evidence · table
“0.514”
Context: 111.0
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 51.5
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
TM26-214Tower Mountain · goldGrade: 0.123Grade Unit: g/tIntercept: 70.5 mView all detailsHide details
Identity
- Hole ID
- TM26-214
- Project
- Tower Mountain
- Commodity
- gold
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- TGOL.V
Geometry
- Grade
- 0.123
- Grade Unit
- g/t
- Intercept
- 70.5 m
- True Width
- 32.7 m
- From
- 430.5 m
- To
- 501 m
- Hole Depth
- 501 m
- Intercept Depth
- 5 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- TM26-214:430.5-501
- Mining Method
- open_pit
Location
- Location
- Bench Target
- Easting
- 300805
- Northing
- 5377391
- Elevation
- 487.7 m
- Azimuth
- 60 °
- Dip
- -50 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- Activation Laboratories Ltd. and AGAT Laboratories
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Deleterious
- Deleterious Flag
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-22T00:00:00.000Z
Reasoning: This intercept, while long and with a stated true width, is below the cut-off grade and contributed to the hole's overall underperformance against the model.
Positive factors
- Significant length of 70.5 metres with a stated true width of 32.7 metres.
- Part of a resource conversion program.
Negative factors
- Grade of 0.123 g/t Au is below the MRE cut-off grade of 0.19 g/t Au.
- This interval contributed to the hole underperforming the model prediction.
Evidence · table
“0.123”
Context: 70.5
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 32.7
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
How Atlas produces this analysis
Minestarters Atlas uses automated extraction to summarize mining announcements, identify reported measurements, and classify supporting evidence. Sentiment reflects the extracted narrative and classification rules; it is an interpretation, not a reported measurement. Evidence quotes and context are provided where available. Missing data, low-confidence results, and review flags indicate limitations. Check the original publisher announcement before relying on an interpretation.