Tectonic Metals Drills 2.41 g/t Au over 59.44 metres, Including 11.82 g/t Au over 10.67 metres and 39.96 g/t Au over 3.05 metres at Alpha Bowl, Flat Gold Project, Alaska
Original announcement by orestocks on
- Company
- Tectonic Metals Inc.
- Ticker
- TECT.V
- Exchange
- Unavailable
- Region
- Alaska
- Primary commodity
- Gold
- Secondary commodities
- None reported
- Document categories
- Drill results, Resource update, Other
- Extracted
- 2026-10-15 12:15:49 UTC
Analysis by Minestarters Atlas
Atlas analysis published:
Minestarters Atlas analysis
Summary
Tectonic Metals announced significant drill results from its Flat Gold Project in Alaska, highlighted by exceptional gold intercepts at the Alpha Bowl and Adit zones. These include 2.41 g/t Au over 59.44 metres, with a high-grade sub-interval of 39.96 g/t Au over 3.05 metres, and 1.52 g/t Au over 42.67 metres, including 27.35 g/t Au over 1.52 metres. The results confirm broad, near-surface gold mineralization, support bulk-tonnage potential, and indicate open extensions, with a maiden Mineral Resource Estimate and Preliminary Economic Assessment targeted for Q1 and Q2 2027, respectively.
Reasoning: Tectonic Metals reported exceptional high-grade gold intercepts within broad, near-surface mineralization at its Flat Gold Project, significantly exceeding prior project averages and global peer benchmarks. The results support bulk-tonnage potential and indicate open extensions, while also identifying a new mineralization style. The company has a clear development pathway with upcoming MRE and PEA.
Positive factors
- Exceptional high-grade gold intercepts within broad mineralization
- Broad, near-surface mineralization supporting bulk-tonnage potential
- Multiple holes ending in mineralization, indicating open extensions
- Identification of a new gold-bearing hydrothermal breccia mineralization style
- Significant step-out potential confirmed at Alpha Bowl and Adit zones
- Upcoming maiden MRE and PEA provide clear development pathway
Negative factors
- True widths are not determined for any reported intercepts
- Specific cut-off grades for individual reported intervals are not disclosed, only a range of cut-offs used for compositing
Facts used in scoring: 94
Classification and evidence
Bonanza Interceptpositive
Exceptionally high-grade zone, well above the deposit-type norm.
Why it applies: The intercept of 39.96 g/t Au over 3.05 m is exceptionally high-grade, well above the deposit-type norm for gold.
Evidence · text
“39.96 g/t Au over 3.05 m”
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: The release includes QA/QC disclosure, mentioning certified lab, QP sign-off, and stated methods (standards, blanks, duplicates).
Evidence · text
“Quality assurance and quality control (QA/QC) protocols included the insertion of certified reference material every 20 samples, blank samples at rate of every 25 samples and field duplicate samples (split from the original 1.5 m for RC or 1.5 m for core intervals) every 25 samples. All QA/QC results returned values within acceptable limits.”
Apparent Width Onlynegative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Why it applies: All reported intercepts are stated as downhole lengths, with no true width provided.
Evidence · text
“All reported intercepts are reported as downhole lengths, as insufficient data exists to determine true widths.”
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: The release states that select composites utilize 0.10, 0.30 or 0.50 g/t Au cut-offs, but does not specify which cut-off applies to each reported interval.
Evidence · text
“Select composites utilizing 0.10, 0.30 or 0.50 g/t Au cut-offs, with a maximum 3.2 m continuous (two sample) below the cut-off inclusion.”
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: The purpose for several holes in the collar table is 'MRE', indicating resource delineation and infill drilling.
Evidence · table
“MRE”
Context: CMD26-054
Step-Out Extensionpositive
Mineralization extended beyond the previously known limit.
Why it applies: The drilling at Alpha Bowl and Adit zones aims to expand the mineralized footprint and extend mineralization beyond current drill limits.
Evidence · text
“Expansion and Delineation Underway: Assays are pending from three holes east of CMR26-170, while ongoing drilling at approximately 100 m spacing is testing the lateral extent, geometry and continuity of mineralization.”
Maiden Resourceneutral
First formal MRE for the project — establishes baseline but typically exploration-stage with high Inferred component.
Why it applies: The company targets a maiden mineral resource estimate for Q1 2027.
Evidence · text
“maiden mineral resource estimate ("MRE") targeted for Q1 2027”
Extracted facts
Stored fact records: 94. Some facts used in scoring do not have a stored record.
Drill Results (94)
CMD26-054Flat · goldGrade: 0.19Grade Unit: g/tIntercept: 18 mView all detailsHide details
Identity
- Hole ID
- CMD26-054
- Project
- Flat
- Commodity
- gold
- Region
- usa_ak
- Reported Region
- usa_ak
- Ticker
- TECT.V
Geometry
- Grade
- 0.19
- Grade Unit
- g/t
- Intercept
- 18 m
- From
- 90.5 m
- To
- 108.5 m
- Hole Depth
- 379.02 m
- Intercept Depth
- 90.5 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- CMD26-054:90.5-108.5
- Mining Method
- open_pit
Location
- Easting
- 552146
- Northing
- 6917632
- Azimuth
- 120 °
- Dip
- -55 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Global
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Compositing
- Max Dilution
- 3.2 m
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-10-15T00:00:00.000Z
Reasoning: This intercept shows low-grade gold mineralization, which is below the typical economic threshold for gold deposits, and true width is not provided.
Negative factors
- Low grade for gold
- Apparent width only
- Cut-off grade not specified for this interval
Evidence · table
“0.19”
Context: 18.00
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
CMD26-054Flat · goldGrade: 0.73Grade Unit: g/tIntercept: 43.5 mView all detailsHide details
Identity
- Hole ID
- CMD26-054
- Project
- Flat
- Commodity
- gold
- Region
- usa_ak
- Reported Region
- usa_ak
- Ticker
- TECT.V
Geometry
- Grade
- 0.73
- Grade Unit
- g/t
- Intercept
- 43.5 m
- From
- 119 m
- To
- 162.5 m
- Hole Depth
- 379.02 m
- Intercept Depth
- 90.5 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- CMD26-054:119-162.5
- Mining Method
- open_pit
Location
- Easting
- 552146
- Northing
- 6917632
- Azimuth
- 120 °
- Dip
- -55 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Global
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Compositing
- Max Dilution
- 3.2 m
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-10-15T00:00:00.000Z
Reasoning: This intercept shows moderate-grade gold over a significant length, contributing to the understanding of the Adit zone and identifying a new hydrothermal breccia style of mineralization.
Positive factors
- Moderate grade for gold
- Significant intercept length
- New mineralization style (hydrothermal breccia) identified in this hole
Negative factors
- Apparent width only
- Cut-off grade not specified for this interval
Evidence · table
“0.73”
Context: 43.50
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
CMD26-054Flat · goldGrade: 1.22Grade Unit: g/tIntercept: 15 mView all detailsHide details
Identity
- Hole ID
- CMD26-054
- Project
- Flat
- Commodity
- gold
- Region
- usa_ak
- Reported Region
- usa_ak
- Ticker
- TECT.V
Geometry
- Grade
- 1.22
- Grade Unit
- g/t
- Intercept
- 15 m
- From
- 119 m
- To
- 134 m
- Hole Depth
- 379.02 m
- Intercept Depth
- 90.5 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- CMD26-054:119-134
- Mining Method
- open_pit
Location
- Easting
- 552146
- Northing
- 6917632
- Azimuth
- 120 °
- Dip
- -55 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Global
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Compositing
- Max Dilution
- 3.2 m
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-10-15T00:00:00.000Z
Reasoning: This sub-interval within CMD26-054 shows a moderate gold grade over a good length, further defining the new hydrothermal breccia mineralization.
Positive factors
- Moderate grade for gold
- Good intercept length
- New mineralization style (hydrothermal breccia) identified in this hole
Negative factors
- Apparent width only
- Cut-off grade not specified for this interval
Evidence · table
“1.22”
Context: 15.00
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
CMD26-054Flat · goldGrade: 1.46Grade Unit: g/tIntercept: 12 mView all detailsHide details
Identity
- Hole ID
- CMD26-054
- Project
- Flat
- Commodity
- gold
- Region
- usa_ak
- Reported Region
- usa_ak
- Ticker
- TECT.V
Geometry
- Grade
- 1.46
- Grade Unit
- g/t
- Intercept
- 12 m
- From
- 119 m
- To
- 131 m
- Hole Depth
- 379.02 m
- Intercept Depth
- 90.5 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- CMD26-054:119-131
- Mining Method
- open_pit
Location
- Easting
- 552146
- Northing
- 6917632
- Azimuth
- 120 °
- Dip
- -55 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Global
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Compositing
- Max Dilution
- 3.2 m
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-10-15T00:00:00.000Z
Reasoning: This sub-interval within CMD26-054 shows a moderate gold grade over a good length, further defining the new hydrothermal breccia mineralization.
Positive factors
- Moderate grade for gold
- Good intercept length
- New mineralization style (hydrothermal breccia) identified in this hole
Negative factors
- Apparent width only
- Cut-off grade not specified for this interval
Evidence · table
“1.46”
Context: 12.00
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
CMD26-054Flat · goldGrade: 1.13Grade Unit: g/tIntercept: 10.5 mView all detailsHide details
Identity
- Hole ID
- CMD26-054
- Project
- Flat
- Commodity
- gold
- Region
- usa_ak
- Reported Region
- usa_ak
- Ticker
- TECT.V
Geometry
- Grade
- 1.13
- Grade Unit
- g/t
- Intercept
- 10.5 m
- From
- 140 m
- To
- 150.5 m
- Hole Depth
- 379.02 m
- Intercept Depth
- 90.5 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- CMD26-054:140-150.5
- Mining Method
- open_pit
Location
- Easting
- 552146
- Northing
- 6917632
- Azimuth
- 120 °
- Dip
- -55 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Global
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Compositing
- Max Dilution
- 3.2 m
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-10-15T00:00:00.000Z
Reasoning: This sub-interval within CMD26-054 shows a moderate gold grade over a good length, further defining the new hydrothermal breccia mineralization.
Positive factors
- Moderate grade for gold
- Good intercept length
- New mineralization style (hydrothermal breccia) identified in this hole
Negative factors
- Apparent width only
- Cut-off grade not specified for this interval
Evidence · table
“1.13”
Context: 10.50
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
CMR26-139Flat · goldGrade: 0.1Grade Unit: g/tIntercept: 1.52 mView all detailsHide details
Identity
- Hole ID
- CMR26-139
- Project
- Flat
- Commodity
- gold
- Region
- usa_ak
- Reported Region
- usa_ak
- Ticker
- TECT.V
Geometry
- Grade
- 0.1
- Grade Unit
- g/t
- Intercept
- 1.52 m
- From
- 3.05 m
- To
- 4.57 m
- Hole Depth
- 48.77 m
- Intercept Depth
- 3.05 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- CMR26-139:3.05-4.57
- Mining Method
- open_pit
Location
- Easting
- 551984
- Northing
- 6917646
- Azimuth
- 120 °
- Dip
- -55 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Global
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Compositing
- Max Dilution
- 3.2 m
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-10-15T00:00:00.000Z
Reasoning: This intercept shows very low-grade gold over a narrow width, indicating weak mineralization in the Adit West zone.
Negative factors
- Low grade for gold
- Narrow intercept length
- Apparent width only
- Cut-off grade not specified for this interval
Evidence · table
“0.10”
Context: 1.52
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
CMR26-139Flat · goldGrade: 0.11Grade Unit: g/tIntercept: 1.52 mView all detailsHide details
Identity
- Hole ID
- CMR26-139
- Project
- Flat
- Commodity
- gold
- Region
- usa_ak
- Reported Region
- usa_ak
- Ticker
- TECT.V
Geometry
- Grade
- 0.11
- Grade Unit
- g/t
- Intercept
- 1.52 m
- From
- 13.72 m
- To
- 15.24 m
- Hole Depth
- 48.77 m
- Intercept Depth
- 3.05 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- CMR26-139:13.72-15.24
- Mining Method
- open_pit
Location
- Easting
- 551984
- Northing
- 6917646
- Azimuth
- 120 °
- Dip
- -55 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Global
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Compositing
- Max Dilution
- 3.2 m
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-10-15T00:00:00.000Z
Reasoning: This intercept shows very low-grade gold over a narrow width, indicating weak mineralization in the Adit West zone.
Negative factors
- Low grade for gold
- Narrow intercept length
- Apparent width only
- Cut-off grade not specified for this interval
Evidence · table
“0.11”
Context: 1.52
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
CMR26-140Flat · goldGrade: 0.16Grade Unit: g/tIntercept: 1.52 mView all detailsHide details
Identity
- Hole ID
- CMR26-140
- Project
- Flat
- Commodity
- gold
- Region
- usa_ak
- Reported Region
- usa_ak
- Ticker
- TECT.V
Geometry
- Grade
- 0.16
- Grade Unit
- g/t
- Intercept
- 1.52 m
- From
- 16.76 m
- To
- 18.29 m
- Hole Depth
- 187.45 m
- Intercept Depth
- 16.76 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- CMR26-140:16.76-18.29
- Mining Method
- open_pit
Location
- Easting
- 551984
- Northing
- 6917646
- Azimuth
- 120 °
- Dip
- -75 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Global
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Compositing
- Max Dilution
- 3.2 m
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-10-15T00:00:00.000Z
Reasoning: This intercept shows very low-grade gold over a narrow width, indicating weak mineralization in the Adit West zone.
Negative factors
- Low grade for gold
- Narrow intercept length
- Apparent width only
- Cut-off grade not specified for this interval
Evidence · table
“0.16”
Context: 1.52
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
CMR26-140Flat · goldGrade: 0.23Grade Unit: g/tIntercept: 3.05 mView all detailsHide details
Identity
- Hole ID
- CMR26-140
- Project
- Flat
- Commodity
- gold
- Region
- usa_ak
- Reported Region
- usa_ak
- Ticker
- TECT.V
Geometry
- Grade
- 0.23
- Grade Unit
- g/t
- Intercept
- 3.05 m
- From
- 38.1 m
- To
- 41.15 m
- Hole Depth
- 187.45 m
- Intercept Depth
- 16.76 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- CMR26-140:38.1-41.15
- Mining Method
- open_pit
Location
- Easting
- 551984
- Northing
- 6917646
- Azimuth
- 120 °
- Dip
- -75 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Global
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Compositing
- Max Dilution
- 3.2 m
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-10-15T00:00:00.000Z
Reasoning: This intercept shows very low-grade gold over a narrow width, indicating weak mineralization in the Adit West zone.
Negative factors
- Low grade for gold
- Narrow intercept length
- Apparent width only
- Cut-off grade not specified for this interval
Evidence · table
“0.23”
Context: 3.05
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
CMR26-140Flat · goldGrade: 0.15Grade Unit: g/tIntercept: 18.29 mView all detailsHide details
Identity
- Hole ID
- CMR26-140
- Project
- Flat
- Commodity
- gold
- Region
- usa_ak
- Reported Region
- usa_ak
- Ticker
- TECT.V
Geometry
- Grade
- 0.15
- Grade Unit
- g/t
- Intercept
- 18.29 m
- From
- 47.24 m
- To
- 65.53 m
- Hole Depth
- 187.45 m
- Intercept Depth
- 16.76 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- CMR26-140:47.24-65.53
- Mining Method
- open_pit
Location
- Easting
- 551984
- Northing
- 6917646
- Azimuth
- 120 °
- Dip
- -75 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Global
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Compositing
- Max Dilution
- 3.2 m
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-10-15T00:00:00.000Z
Reasoning: This intercept shows very low-grade gold over a moderate width, indicating weak mineralization in the Adit West zone.
Negative factors
- Low grade for gold
- Apparent width only
- Cut-off grade not specified for this interval
Evidence · table
“0.15”
Context: 18.29
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
CMR26-140Flat · goldGrade: 0.07Grade Unit: g/tIntercept: 6.1 mView all detailsHide details
Identity
- Hole ID
- CMR26-140
- Project
- Flat
- Commodity
- gold
- Region
- usa_ak
- Reported Region
- usa_ak
- Ticker
- TECT.V
Geometry
- Grade
- 0.07
- Grade Unit
- g/t
- Intercept
- 6.1 m
- From
- 92.96 m
- To
- 99.06 m
- Hole Depth
- 187.45 m
- Intercept Depth
- 16.76 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- CMR26-140:92.96-99.06
- Mining Method
- open_pit
Location
- Easting
- 551984
- Northing
- 6917646
- Azimuth
- 120 °
- Dip
- -75 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Global
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Compositing
- Max Dilution
- 3.2 m
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-10-15T00:00:00.000Z
Reasoning: This intercept shows very low-grade gold over a narrow width, indicating weak mineralization in the Adit West zone.
Negative factors
- Low grade for gold
- Narrow intercept length
- Apparent width only
- Cut-off grade not specified for this interval
Evidence · table
“0.07”
Context: 6.10
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
CMR26-140Flat · goldGrade: 0.18Grade Unit: g/tIntercept: 1.52 mView all detailsHide details
Identity
- Hole ID
- CMR26-140
- Project
- Flat
- Commodity
- gold
- Region
- usa_ak
- Reported Region
- usa_ak
- Ticker
- TECT.V
Geometry
- Grade
- 0.18
- Grade Unit
- g/t
- Intercept
- 1.52 m
- From
- 103.63 m
- To
- 105.16 m
- Hole Depth
- 187.45 m
- Intercept Depth
- 16.76 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- CMR26-140:103.63-105.16
- Mining Method
- open_pit
Location
- Easting
- 551984
- Northing
- 6917646
- Azimuth
- 120 °
- Dip
- -75 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Global
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Compositing
- Max Dilution
- 3.2 m
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-10-15T00:00:00.000Z
Reasoning: This intercept shows very low-grade gold over a narrow width, indicating weak mineralization in the Adit West zone.
Negative factors
- Low grade for gold
- Narrow intercept length
- Apparent width only
- Cut-off grade not specified for this interval
Evidence · table
“0.18”
Context: 1.52
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
CMR26-140Flat · goldGrade: 0.09Grade Unit: g/tIntercept: 7.62 mView all detailsHide details
Identity
- Hole ID
- CMR26-140
- Project
- Flat
- Commodity
- gold
- Region
- usa_ak
- Reported Region
- usa_ak
- Ticker
- TECT.V
Geometry
- Grade
- 0.09
- Grade Unit
- g/t
- Intercept
- 7.62 m
- From
- 111.25 m
- To
- 118.87 m
- Hole Depth
- 187.45 m
- Intercept Depth
- 16.76 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- CMR26-140:111.25-118.87
- Mining Method
- open_pit
Location
- Easting
- 551984
- Northing
- 6917646
- Azimuth
- 120 °
- Dip
- -75 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Global
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Compositing
- Max Dilution
- 3.2 m
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-10-15T00:00:00.000Z
Reasoning: This intercept shows very low-grade gold over a narrow width, indicating weak mineralization in the Adit West zone.
Negative factors
- Low grade for gold
- Narrow intercept length
- Apparent width only
- Cut-off grade not specified for this interval
Evidence · table
“0.09”
Context: 7.62
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
CMR26-140Flat · goldGrade: 0.11Grade Unit: g/tIntercept: 1.52 mView all detailsHide details
Identity
- Hole ID
- CMR26-140
- Project
- Flat
- Commodity
- gold
- Region
- usa_ak
- Reported Region
- usa_ak
- Ticker
- TECT.V
Geometry
- Grade
- 0.11
- Grade Unit
- g/t
- Intercept
- 1.52 m
- From
- 182.88 m
- To
- 184.4 m
- Hole Depth
- 187.45 m
- Intercept Depth
- 16.76 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- CMR26-140:182.88-184.4
- Mining Method
- open_pit
Location
- Easting
- 551984
- Northing
- 6917646
- Azimuth
- 120 °
- Dip
- -75 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Global
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Compositing
- Max Dilution
- 3.2 m
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-10-15T00:00:00.000Z
Reasoning: This intercept shows very low-grade gold over a narrow width, indicating weak mineralization in the Adit West zone.
Negative factors
- Low grade for gold
- Narrow intercept length
- Apparent width only
- Cut-off grade not specified for this interval
Evidence · table
“0.11”
Context: 1.52
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
CMR26-143Flat · goldGrade: 0.14Grade Unit: g/tIntercept: 1.52 mView all detailsHide details
Identity
- Hole ID
- CMR26-143
- Project
- Flat
- Commodity
- gold
- Region
- usa_ak
- Reported Region
- usa_ak
- Ticker
- TECT.V
Geometry
- Grade
- 0.14
- Grade Unit
- g/t
- Intercept
- 1.52 m
- From
- 33.53 m
- To
- 35.05 m
- Hole Depth
- 96.01 m
- Intercept Depth
- 33.53 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- CMR26-143:33.53-35.05
- Mining Method
- open_pit
Location
- Easting
- 551920
- Northing
- 6917683
- Azimuth
- 120 °
- Dip
- -55 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Global
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Compositing
- Max Dilution
- 3.2 m
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-10-15T00:00:00.000Z
Reasoning: This intercept shows very low-grade gold over a narrow width, indicating weak mineralization in the Adit West zone.
Negative factors
- Low grade for gold
- Narrow intercept length
- Apparent width only
- Cut-off grade not specified for this interval
Evidence · table
“0.14”
Context: 1.52
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
CMR26-143Flat · goldGrade: 1.16Grade Unit: g/tIntercept: 4.57 mView all detailsHide details
Identity
- Hole ID
- CMR26-143
- Project
- Flat
- Commodity
- gold
- Region
- usa_ak
- Reported Region
- usa_ak
- Ticker
- TECT.V
Geometry
- Grade
- 1.16
- Grade Unit
- g/t
- Intercept
- 4.57 m
- From
- 56.39 m
- To
- 60.96 m
- Hole Depth
- 96.01 m
- Intercept Depth
- 33.53 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- CMR26-143:56.39-60.96
- Mining Method
- open_pit
Location
- Easting
- 551920
- Northing
- 6917683
- Azimuth
- 120 °
- Dip
- -55 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Global
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Compositing
- Max Dilution
- 3.2 m
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-10-15T00:00:00.000Z
Reasoning: This intercept shows a moderate gold grade over a narrow width, indicating some mineralization in the Adit West zone.
Positive factors
- Moderate grade for gold
Negative factors
- Narrow intercept length
- Apparent width only
- Cut-off grade not specified for this interval
Evidence · table
“1.16”
Context: 4.57
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
CMR26-143Flat · goldGrade: 3.19Grade Unit: g/tIntercept: 1.52 mView all detailsHide details
Identity
- Hole ID
- CMR26-143
- Project
- Flat
- Commodity
- gold
- Region
- usa_ak
- Reported Region
- usa_ak
- Ticker
- TECT.V
Geometry
- Grade
- 3.19
- Grade Unit
- g/t
- Intercept
- 1.52 m
- From
- 56.39 m
- To
- 57.91 m
- Hole Depth
- 96.01 m
- Intercept Depth
- 33.53 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- CMR26-143:56.39-57.91
- Mining Method
- open_pit
Location
- Easting
- 551920
- Northing
- 6917683
- Azimuth
- 120 °
- Dip
- -55 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Global
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Compositing
- Max Dilution
- 3.2 m
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-10-15T00:00:00.000Z
Reasoning: This sub-interval shows a strong gold grade, indicating a higher-grade zone within the broader mineralization at Adit West.
Positive factors
- Strong grade for gold
Negative factors
- Narrow intercept length
- Apparent width only
- Cut-off grade not specified for this interval
Evidence · table
“3.19”
Context: 1.52
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
CMR26-143Flat · goldGrade: 0.16Grade Unit: g/tIntercept: 4.57 mView all detailsHide details
Identity
- Hole ID
- CMR26-143
- Project
- Flat
- Commodity
- gold
- Region
- usa_ak
- Reported Region
- usa_ak
- Ticker
- TECT.V
Geometry
- Grade
- 0.16
- Grade Unit
- g/t
- Intercept
- 4.57 m
- From
- 89.92 m
- To
- 94.49 m
- Hole Depth
- 96.01 m
- Intercept Depth
- 33.53 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- CMR26-143:89.92-94.49
- Mining Method
- open_pit
Location
- Easting
- 551920
- Northing
- 6917683
- Azimuth
- 120 °
- Dip
- -55 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Global
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Compositing
- Max Dilution
- 3.2 m
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-10-15T00:00:00.000Z
Reasoning: This intercept shows very low-grade gold over a narrow width, indicating weak mineralization in the Adit West zone.
Negative factors
- Low grade for gold
- Narrow intercept length
- Apparent width only
- Cut-off grade not specified for this interval
Evidence · table
“0.16”
Context: 4.57
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
CMR26-144Flat · goldGrade: 0.15Grade Unit: g/tIntercept: 6.1 mView all detailsHide details
Identity
- Hole ID
- CMR26-144
- Project
- Flat
- Commodity
- gold
- Region
- usa_ak
- Reported Region
- usa_ak
- Ticker
- TECT.V
Geometry
- Grade
- 0.15
- Grade Unit
- g/t
- Intercept
- 6.1 m
- From
- 15.24 m
- To
- 21.34 m
- Hole Depth
- 124.97 m
- Intercept Depth
- 15.24 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- CMR26-144:15.24-21.34
- Mining Method
- open_pit
Location
- Easting
- 551920
- Northing
- 6917683
- Azimuth
- 120 °
- Dip
- -55 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Global
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Compositing
- Max Dilution
- 3.2 m
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-10-15T00:00:00.000Z
Reasoning: This intercept shows very low-grade gold over a narrow width, indicating weak mineralization in the Adit West zone.
Negative factors
- Low grade for gold
- Narrow intercept length
- Apparent width only
- Cut-off grade not specified for this interval
Evidence · table
“0.15”
Context: 6.10
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
CMR26-144Flat · goldGrade: 0.1Grade Unit: g/tIntercept: 1.52 mView all detailsHide details
Identity
- Hole ID
- CMR26-144
- Project
- Flat
- Commodity
- gold
- Region
- usa_ak
- Reported Region
- usa_ak
- Ticker
- TECT.V
Geometry
- Grade
- 0.1
- Grade Unit
- g/t
- Intercept
- 1.52 m
- From
- 36.58 m
- To
- 38.1 m
- Hole Depth
- 124.97 m
- Intercept Depth
- 15.24 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- CMR26-144:36.58-38.1
- Mining Method
- open_pit
Location
- Easting
- 551920
- Northing
- 6917683
- Azimuth
- 120 °
- Dip
- -55 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Global
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Compositing
- Max Dilution
- 3.2 m
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-10-15T00:00:00.000Z
Reasoning: This intercept shows very low-grade gold over a narrow width, indicating weak mineralization in the Adit West zone.
Negative factors
- Low grade for gold
- Narrow intercept length
- Apparent width only
- Cut-off grade not specified for this interval
Evidence · table
“0.10”
Context: 1.52
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
CMR26-144Flat · goldGrade: 0.27Grade Unit: g/tIntercept: 3.05 mView all detailsHide details
Identity
- Hole ID
- CMR26-144
- Project
- Flat
- Commodity
- gold
- Region
- usa_ak
- Reported Region
- usa_ak
- Ticker
- TECT.V
Geometry
- Grade
- 0.27
- Grade Unit
- g/t
- Intercept
- 3.05 m
- From
- 83.82 m
- To
- 86.87 m
- Hole Depth
- 124.97 m
- Intercept Depth
- 15.24 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- CMR26-144:83.82-86.87
- Mining Method
- open_pit
Location
- Easting
- 551920
- Northing
- 6917683
- Azimuth
- 120 °
- Dip
- -55 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Global
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Compositing
- Max Dilution
- 3.2 m
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-10-15T00:00:00.000Z
Reasoning: This intercept shows very low-grade gold over a narrow width, indicating weak mineralization in the Adit West zone.
Negative factors
- Low grade for gold
- Narrow intercept length
- Apparent width only
- Cut-off grade not specified for this interval
Evidence · table
“0.27”
Context: 3.05
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
CMR26-144Flat · goldGrade: 0.24Grade Unit: g/tIntercept: 4.57 mView all detailsHide details
Identity
- Hole ID
- CMR26-144
- Project
- Flat
- Commodity
- gold
- Region
- usa_ak
- Reported Region
- usa_ak
- Ticker
- TECT.V
Geometry
- Grade
- 0.24
- Grade Unit
- g/t
- Intercept
- 4.57 m
- From
- 106.68 m
- To
- 111.25 m
- Hole Depth
- 124.97 m
- Intercept Depth
- 15.24 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- CMR26-144:106.68-111.25
- Mining Method
- open_pit
Location
- Easting
- 551920
- Northing
- 6917683
- Azimuth
- 120 °
- Dip
- -55 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Global
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Compositing
- Max Dilution
- 3.2 m
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-10-15T00:00:00.000Z
Reasoning: This intercept shows very low-grade gold over a narrow width, indicating weak mineralization in the Adit West zone.
Negative factors
- Low grade for gold
- Narrow intercept length
- Apparent width only
- Cut-off grade not specified for this interval
Evidence · table
“0.24”
Context: 4.57
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
CMR26-144Flat · goldGrade: 0.11Grade Unit: g/tIntercept: 1.52 mView all detailsHide details
Identity
- Hole ID
- CMR26-144
- Project
- Flat
- Commodity
- gold
- Region
- usa_ak
- Reported Region
- usa_ak
- Ticker
- TECT.V
Geometry
- Grade
- 0.11
- Grade Unit
- g/t
- Intercept
- 1.52 m
- From
- 120.4 m
- To
- 121.92 m
- Hole Depth
- 124.97 m
- Intercept Depth
- 15.24 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- CMR26-144:120.4-121.92
- Mining Method
- open_pit
Location
- Easting
- 551920
- Northing
- 6917683
- Azimuth
- 120 °
- Dip
- -55 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Global
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Compositing
- Max Dilution
- 3.2 m
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-10-15T00:00:00.000Z
Reasoning: This intercept shows very low-grade gold over a narrow width, indicating weak mineralization in the Adit West zone.
Negative factors
- Low grade for gold
- Narrow intercept length
- Apparent width only
- Cut-off grade not specified for this interval
Evidence · table
“0.11”
Context: 1.52
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
CMR26-145Flat · goldGrade: 0.1Grade Unit: g/tIntercept: 10.67 mView all detailsHide details
Identity
- Hole ID
- CMR26-145
- Project
- Flat
- Commodity
- gold
- Region
- usa_ak
- Reported Region
- usa_ak
- Ticker
- TECT.V
Geometry
- Grade
- 0.1
- Grade Unit
- g/t
- Intercept
- 10.67 m
- From
- 0 m
- To
- 10.67 m
- Hole Depth
- 126.49 m
- Intercept Depth
- 0 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- CMR26-145:0-10.67
- Mining Method
- open_pit
Location
- Easting
- 552035
- Northing
- 6917727
- Azimuth
- 120 °
- Dip
- -55 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Global
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Compositing
- Max Dilution
- 3.2 m
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-10-15T00:00:00.000Z
Reasoning: This intercept shows very low-grade gold over a moderate width, indicating weak mineralization in the Adit West zone.
Negative factors
- Low grade for gold
- Apparent width only
- Cut-off grade not specified for this interval
Evidence · table
“0.10”
Context: 10.67
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
CMR26-145Flat · goldGrade: 0.26Grade Unit: g/tIntercept: 1.52 mView all detailsHide details
Identity
- Hole ID
- CMR26-145
- Project
- Flat
- Commodity
- gold
- Region
- usa_ak
- Reported Region
- usa_ak
- Ticker
- TECT.V
Geometry
- Grade
- 0.26
- Grade Unit
- g/t
- Intercept
- 1.52 m
- From
- 27.43 m
- To
- 28.96 m
- Hole Depth
- 126.49 m
- Intercept Depth
- 0 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- CMR26-145:27.43-28.96
- Mining Method
- open_pit
Location
- Easting
- 552035
- Northing
- 6917727
- Azimuth
- 120 °
- Dip
- -55 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Global
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Compositing
- Max Dilution
- 3.2 m
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-10-15T00:00:00.000Z
Reasoning: This intercept shows very low-grade gold over a narrow width, indicating weak mineralization in the Adit West zone.
Negative factors
- Low grade for gold
- Narrow intercept length
- Apparent width only
- Cut-off grade not specified for this interval
Evidence · table
“0.26”
Context: 1.52
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
CMR26-145Flat · goldGrade: 0.12Grade Unit: g/tIntercept: 1.52 mView all detailsHide details
Identity
- Hole ID
- CMR26-145
- Project
- Flat
- Commodity
- gold
- Region
- usa_ak
- Reported Region
- usa_ak
- Ticker
- TECT.V
Geometry
- Grade
- 0.12
- Grade Unit
- g/t
- Intercept
- 1.52 m
- From
- 36.58 m
- To
- 38.1 m
- Hole Depth
- 126.49 m
- Intercept Depth
- 0 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- CMR26-145:36.58-38.1
- Mining Method
- open_pit
Location
- Easting
- 552035
- Northing
- 6917727
- Azimuth
- 120 °
- Dip
- -55 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Global
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Compositing
- Max Dilution
- 3.2 m
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-10-15T00:00:00.000Z
Reasoning: This intercept shows very low-grade gold over a narrow width, indicating weak mineralization in the Adit West zone.
Negative factors
- Low grade for gold
- Narrow intercept length
- Apparent width only
- Cut-off grade not specified for this interval
Evidence · table
“0.12”
Context: 1.52
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
CMR26-145Flat · goldGrade: 0.68Grade Unit: g/tIntercept: 1.52 mView all detailsHide details
Identity
- Hole ID
- CMR26-145
- Project
- Flat
- Commodity
- gold
- Region
- usa_ak
- Reported Region
- usa_ak
- Ticker
- TECT.V
Geometry
- Grade
- 0.68
- Grade Unit
- g/t
- Intercept
- 1.52 m
- From
- 44.2 m
- To
- 45.72 m
- Hole Depth
- 126.49 m
- Intercept Depth
- 0 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- CMR26-145:44.2-45.72
- Mining Method
- open_pit
Location
- Easting
- 552035
- Northing
- 6917727
- Azimuth
- 120 °
- Dip
- -55 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Global
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Compositing
- Max Dilution
- 3.2 m
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-10-15T00:00:00.000Z
Reasoning: This intercept shows a moderate gold grade over a narrow width, indicating some mineralization in the Adit West zone.
Positive factors
- Moderate grade for gold
Negative factors
- Narrow intercept length
- Apparent width only
- Cut-off grade not specified for this interval
Evidence · table
“0.68”
Context: 1.52
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
CMR26-145Flat · goldGrade: 0.11Grade Unit: g/tIntercept: 1.52 mView all detailsHide details
Identity
- Hole ID
- CMR26-145
- Project
- Flat
- Commodity
- gold
- Region
- usa_ak
- Reported Region
- usa_ak
- Ticker
- TECT.V
Geometry
- Grade
- 0.11
- Grade Unit
- g/t
- Intercept
- 1.52 m
- From
- 85.34 m
- To
- 86.87 m
- Hole Depth
- 126.49 m
- Intercept Depth
- 0 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- CMR26-145:85.34-86.87
- Mining Method
- open_pit
Location
- Easting
- 552035
- Northing
- 6917727
- Azimuth
- 120 °
- Dip
- -55 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Global
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Compositing
- Max Dilution
- 3.2 m
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-10-15T00:00:00.000Z
Reasoning: This intercept shows very low-grade gold over a narrow width, indicating weak mineralization in the Adit West zone.
Negative factors
- Low grade for gold
- Narrow intercept length
- Apparent width only
- Cut-off grade not specified for this interval
Evidence · table
“0.11”
Context: 1.52
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
CMR26-145Flat · goldGrade: 0.1Grade Unit: g/tIntercept: 1.52 mView all detailsHide details
Identity
- Hole ID
- CMR26-145
- Project
- Flat
- Commodity
- gold
- Region
- usa_ak
- Reported Region
- usa_ak
- Ticker
- TECT.V
Geometry
- Grade
- 0.1
- Grade Unit
- g/t
- Intercept
- 1.52 m
- From
- 103.63 m
- To
- 105.16 m
- Hole Depth
- 126.49 m
- Intercept Depth
- 0 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- CMR26-145:103.63-105.16
- Mining Method
- open_pit
Location
- Easting
- 552035
- Northing
- 6917727
- Azimuth
- 120 °
- Dip
- -55 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Global
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Compositing
- Max Dilution
- 3.2 m
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-10-15T00:00:00.000Z
Reasoning: This intercept shows very low-grade gold over a narrow width, indicating weak mineralization in the Adit West zone.
Negative factors
- Low grade for gold
- Narrow intercept length
- Apparent width only
- Cut-off grade not specified for this interval
Evidence · table
“0.10”
Context: 1.52
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
CMR26-145Flat · goldGrade: 0.17Grade Unit: g/tIntercept: 1.52 mView all detailsHide details
Identity
- Hole ID
- CMR26-145
- Project
- Flat
- Commodity
- gold
- Region
- usa_ak
- Reported Region
- usa_ak
- Ticker
- TECT.V
Geometry
- Grade
- 0.17
- Grade Unit
- g/t
- Intercept
- 1.52 m
- From
- 109.73 m
- To
- 111.25 m
- Hole Depth
- 126.49 m
- Intercept Depth
- 0 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- CMR26-145:109.73-111.25
- Mining Method
- open_pit
Location
- Easting
- 552035
- Northing
- 6917727
- Azimuth
- 120 °
- Dip
- -55 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Global
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Compositing
- Max Dilution
- 3.2 m
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-10-15T00:00:00.000Z
Reasoning: This intercept shows very low-grade gold over a narrow width, indicating weak mineralization in the Adit West zone.
Negative factors
- Low grade for gold
- Narrow intercept length
- Apparent width only
- Cut-off grade not specified for this interval
Evidence · table
“0.17”
Context: 1.52
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
CMR26-148Flat · goldGrade: 0.2Grade Unit: g/tIntercept: 1.52 mView all detailsHide details
Identity
- Hole ID
- CMR26-148
- Project
- Flat
- Commodity
- gold
- Region
- usa_ak
- Reported Region
- usa_ak
- Ticker
- TECT.V
Geometry
- Grade
- 0.2
- Grade Unit
- g/t
- Intercept
- 1.52 m
- From
- 4.57 m
- To
- 6.1 m
- Hole Depth
- 105.69 m
- Intercept Depth
- 4.57 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- CMR26-148:4.57-6.1
- Mining Method
- open_pit
Location
- Easting
- 551642
- Northing
- 6917502
- Azimuth
- 120 °
- Dip
- -55 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Global
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Compositing
- Max Dilution
- 3.2 m
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-10-15T00:00:00.000Z
Reasoning: This intercept shows very low-grade gold over a narrow width, indicating weak mineralization in the Adit West zone.
Negative factors
- Low grade for gold
- Narrow intercept length
- Apparent width only
- Cut-off grade not specified for this interval
Evidence · table
“0.20”
Context: 1.52
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
CMR26-150Flat · goldGrade: 0.12Grade Unit: g/tIntercept: 1.52 mView all detailsHide details
Identity
- Hole ID
- CMR26-150
- Project
- Flat
- Commodity
- gold
- Region
- usa_ak
- Reported Region
- usa_ak
- Ticker
- TECT.V
Geometry
- Grade
- 0.12
- Grade Unit
- g/t
- Intercept
- 1.52 m
- From
- 89.92 m
- To
- 91.44 m
- Hole Depth
- 105.16 m
- Intercept Depth
- 89.92 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- CMR26-150:89.92-91.44
- Mining Method
- open_pit
Location
- Easting
- 551752
- Northing
- 6917544
- Azimuth
- 120 °
- Dip
- -75 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Global
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Compositing
- Max Dilution
- 3.2 m
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-10-15T00:00:00.000Z
Reasoning: This intercept shows very low-grade gold over a narrow width, indicating weak mineralization in the Adit West zone.
Negative factors
- Low grade for gold
- Narrow intercept length
- Apparent width only
- Cut-off grade not specified for this interval
Evidence · table
“0.12”
Context: 1.52
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
CMR26-150Flat · goldGrade: 0.16Grade Unit: g/tIntercept: 1.52 mView all detailsHide details
Identity
- Hole ID
- CMR26-150
- Project
- Flat
- Commodity
- gold
- Region
- usa_ak
- Reported Region
- usa_ak
- Ticker
- TECT.V
Geometry
- Grade
- 0.16
- Grade Unit
- g/t
- Intercept
- 1.52 m
- From
- 102.11 m
- To
- 103.63 m
- Hole Depth
- 105.16 m
- Intercept Depth
- 89.92 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- CMR26-150:102.11-103.63
- Mining Method
- open_pit
Location
- Easting
- 551752
- Northing
- 6917544
- Azimuth
- 120 °
- Dip
- -75 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Global
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Compositing
- Max Dilution
- 3.2 m
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-10-15T00:00:00.000Z
Reasoning: This intercept shows very low-grade gold over a narrow width, indicating weak mineralization in the Adit West zone.
Negative factors
- Low grade for gold
- Narrow intercept length
- Apparent width only
- Cut-off grade not specified for this interval
Evidence · table
“0.16”
Context: 1.52
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
CMR26-160Flat · goldGrade: 0.9Grade Unit: g/tIntercept: 73.15 mView all detailsHide details
Identity
- Hole ID
- CMR26-160
- Project
- Flat
- Commodity
- gold
- Region
- usa_ak
- Reported Region
- usa_ak
- Ticker
- TECT.V
Geometry
- Grade
- 0.9
- Grade Unit
- g/t
- Intercept
- 73.15 m
- From
- 1.52 m
- To
- 74.68 m
- Hole Depth
- 147.83 m
- Intercept Depth
- 1.52 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- CMR26-160:1.52-74.68
- Mining Method
- open_pit
Location
- Easting
- 552327
- Northing
- 6917793
- Azimuth
- 110 °
- Dip
- -55 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Global
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Compositing
- Max Dilution
- 3.2 m
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-10-15T00:00:00.000Z
Reasoning: This intercept shows moderate-grade gold over a very significant width starting near surface, indicating potential for bulk-tonnage mineralization at Adit.
Positive factors
- Moderate grade for gold
- Very significant intercept length
- Near-surface mineralization
Negative factors
- Apparent width only
- Cut-off grade not specified for this interval
Evidence · table
“0.90”
Context: 73.15
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
CMR26-160Flat · goldGrade: 2.14Grade Unit: g/tIntercept: 21.34 mView all detailsHide details
Identity
- Hole ID
- CMR26-160
- Project
- Flat
- Commodity
- gold
- Region
- usa_ak
- Reported Region
- usa_ak
- Ticker
- TECT.V
Geometry
- Grade
- 2.14
- Grade Unit
- g/t
- Intercept
- 21.34 m
- From
- 13.72 m
- To
- 35.05 m
- Hole Depth
- 147.83 m
- Intercept Depth
- 1.52 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- CMR26-160:13.72-35.05
- Mining Method
- open_pit
Location
- Easting
- 552327
- Northing
- 6917793
- Azimuth
- 110 °
- Dip
- -55 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Global
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Compositing
- Max Dilution
- 3.2 m
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-10-15T00:00:00.000Z
Reasoning: This sub-interval shows strong gold grade over a significant width, indicating a higher-grade domain within the broader Adit mineralization.
Positive factors
- Strong grade for gold
- Significant intercept length
Negative factors
- Apparent width only
- Cut-off grade not specified for this interval
Evidence · table
“2.14”
Context: 21.34
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
CMR26-160Flat · goldGrade: 6.97Grade Unit: g/tIntercept: 4.57 mView all detailsHide details
Identity
- Hole ID
- CMR26-160
- Project
- Flat
- Commodity
- gold
- Region
- usa_ak
- Reported Region
- usa_ak
- Ticker
- TECT.V
Geometry
- Grade
- 6.97
- Grade Unit
- g/t
- Intercept
- 4.57 m
- From
- 13.72 m
- To
- 18.29 m
- Hole Depth
- 147.83 m
- Intercept Depth
- 1.52 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- CMR26-160:13.72-18.29
- Mining Method
- open_pit
Location
- Easting
- 552327
- Northing
- 6917793
- Azimuth
- 110 °
- Dip
- -55 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Global
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Compositing
- Max Dilution
- 3.2 m
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-10-15T00:00:00.000Z
Reasoning: This sub-interval shows exceptional gold grade over a good width, indicating a very high-grade domain within the Adit mineralization.
Positive factors
- Exceptional grade for gold
- Good intercept length
Negative factors
- Apparent width only
- Cut-off grade not specified for this interval
Evidence · table
“6.97”
Context: 4.57
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
CMR26-160Flat · goldGrade: 1.85Grade Unit: g/tIntercept: 6.1 mView all detailsHide details
Identity
- Hole ID
- CMR26-160
- Project
- Flat
- Commodity
- gold
- Region
- usa_ak
- Reported Region
- usa_ak
- Ticker
- TECT.V
Geometry
- Grade
- 1.85
- Grade Unit
- g/t
- Intercept
- 6.1 m
- From
- 64.01 m
- To
- 70.1 m
- Hole Depth
- 147.83 m
- Intercept Depth
- 1.52 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- CMR26-160:64.01-70.1
- Mining Method
- open_pit
Location
- Easting
- 552327
- Northing
- 6917793
- Azimuth
- 110 °
- Dip
- -55 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Global
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Compositing
- Max Dilution
- 3.2 m
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-10-15T00:00:00.000Z
Reasoning: This sub-interval shows moderate gold grade over a good width, contributing to the overall Adit mineralization.
Positive factors
- Moderate grade for gold
- Good intercept length
Negative factors
- Apparent width only
- Cut-off grade not specified for this interval
Evidence · table
“1.85”
Context: 6.10
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
CMR26-160Flat · goldGrade: 6.57Grade Unit: g/tIntercept: 1.52 mView all detailsHide details
Identity
- Hole ID
- CMR26-160
- Project
- Flat
- Commodity
- gold
- Region
- usa_ak
- Reported Region
- usa_ak
- Ticker
- TECT.V
Geometry
- Grade
- 6.57
- Grade Unit
- g/t
- Intercept
- 1.52 m
- From
- 68.58 m
- To
- 70.1 m
- Hole Depth
- 147.83 m
- Intercept Depth
- 1.52 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- CMR26-160:68.58-70.1
- Mining Method
- open_pit
Location
- Easting
- 552327
- Northing
- 6917793
- Azimuth
- 110 °
- Dip
- -55 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Global
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Compositing
- Max Dilution
- 3.2 m
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-10-15T00:00:00.000Z
Reasoning: This sub-interval shows exceptional gold grade over a narrow width, indicating a very high-grade domain within the Adit mineralization.
Positive factors
- Exceptional grade for gold
Negative factors
- Narrow intercept length
- Apparent width only
- Cut-off grade not specified for this interval
Evidence · table
“6.57”
Context: 1.52
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
CMR26-160Flat · goldGrade: 0.21Grade Unit: g/tIntercept: 13.72 mView all detailsHide details
Identity
- Hole ID
- CMR26-160
- Project
- Flat
- Commodity
- gold
- Region
- usa_ak
- Reported Region
- usa_ak
- Ticker
- TECT.V
Geometry
- Grade
- 0.21
- Grade Unit
- g/t
- Intercept
- 13.72 m
- From
- 96.01 m
- To
- 109.73 m
- Hole Depth
- 147.83 m
- Intercept Depth
- 1.52 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- CMR26-160:96.01-109.73
- Mining Method
- open_pit
Location
- Easting
- 552327
- Northing
- 6917793
- Azimuth
- 110 °
- Dip
- -55 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Global
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Compositing
- Max Dilution
- 3.2 m
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-10-15T00:00:00.000Z
Reasoning: This intercept shows very low-grade gold over a moderate width, indicating weak mineralization in the Adit zone.
Negative factors
- Low grade for gold
- Apparent width only
- Cut-off grade not specified for this interval
Evidence · table
“0.21”
Context: 13.72
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
CMR26-160Flat · goldGrade: 0.72Grade Unit: g/tIntercept: 10.67 mView all detailsHide details
Identity
- Hole ID
- CMR26-160
- Project
- Flat
- Commodity
- gold
- Region
- usa_ak
- Reported Region
- usa_ak
- Ticker
- TECT.V
Geometry
- Grade
- 0.72
- Grade Unit
- g/t
- Intercept
- 10.67 m
- From
- 124.97 m
- To
- 135.64 m
- Hole Depth
- 147.83 m
- Intercept Depth
- 1.52 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- CMR26-160:124.97-135.64
- Mining Method
- open_pit
Location
- Easting
- 552327
- Northing
- 6917793
- Azimuth
- 110 °
- Dip
- -55 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Global
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Compositing
- Max Dilution
- 3.2 m
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-10-15T00:00:00.000Z
Reasoning: This intercept shows moderate-grade gold over a good width, contributing to the overall Adit mineralization.
Positive factors
- Moderate grade for gold
- Good intercept length
Negative factors
- Apparent width only
- Cut-off grade not specified for this interval
Evidence · table
“0.72”
Context: 10.67
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
CMR26-160Flat · goldGrade: 0.93Grade Unit: g/tIntercept: 7.62 mView all detailsHide details
Identity
- Hole ID
- CMR26-160
- Project
- Flat
- Commodity
- gold
- Region
- usa_ak
- Reported Region
- usa_ak
- Ticker
- TECT.V
Geometry
- Grade
- 0.93
- Grade Unit
- g/t
- Intercept
- 7.62 m
- From
- 124.97 m
- To
- 132.59 m
- Hole Depth
- 147.83 m
- Intercept Depth
- 1.52 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- CMR26-160:124.97-132.59
- Mining Method
- open_pit
Location
- Easting
- 552327
- Northing
- 6917793
- Azimuth
- 110 °
- Dip
- -55 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Global
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Compositing
- Max Dilution
- 3.2 m
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-10-15T00:00:00.000Z
Reasoning: This sub-interval shows moderate gold grade over a good width, contributing to the overall Adit mineralization.
Positive factors
- Moderate grade for gold
- Good intercept length
Negative factors
- Apparent width only
- Cut-off grade not specified for this interval
Evidence · table
“0.93”
Context: 7.62
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
CMR26-161Flat · goldGrade: 0.7Grade Unit: g/tIntercept: 45.72 mView all detailsHide details
Identity
- Hole ID
- CMR26-161
- Project
- Flat
- Commodity
- gold
- Region
- usa_ak
- Reported Region
- usa_ak
- Ticker
- TECT.V
Geometry
- Grade
- 0.7
- Grade Unit
- g/t
- Intercept
- 45.72 m
- From
- 1.52 m
- To
- 47.24 m
- Hole Depth
- 144.78 m
- Intercept Depth
- 1.52 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- CMR26-161:1.52-47.24
- Mining Method
- open_pit
Location
- Easting
- 552327
- Northing
- 6917793
- Azimuth
- 110 °
- Dip
- -75 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Global
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Compositing
- Max Dilution
- 3.2 m
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-10-15T00:00:00.000Z
Reasoning: This intercept shows moderate-grade gold over a significant width starting near surface, contributing to the bulk-tonnage potential at Adit.
Positive factors
- Moderate grade for gold
- Significant intercept length
- Near-surface mineralization
Negative factors
- Apparent width only
- Cut-off grade not specified for this interval
Evidence · table
“0.70”
Context: 45.72
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
CMR26-161Flat · goldGrade: 1.14Grade Unit: g/tIntercept: 16.76 mView all detailsHide details
Identity
- Hole ID
- CMR26-161
- Project
- Flat
- Commodity
- gold
- Region
- usa_ak
- Reported Region
- usa_ak
- Ticker
- TECT.V
Geometry
- Grade
- 1.14
- Grade Unit
- g/t
- Intercept
- 16.76 m
- From
- 15.24 m
- To
- 32 m
- Hole Depth
- 144.78 m
- Intercept Depth
- 1.52 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- CMR26-161:15.24-32
- Mining Method
- open_pit
Location
- Easting
- 552327
- Northing
- 6917793
- Azimuth
- 110 °
- Dip
- -75 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Global
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Compositing
- Max Dilution
- 3.2 m
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-10-15T00:00:00.000Z
Reasoning: This sub-interval shows moderate gold grade over a significant width, contributing to the overall Adit mineralization.
Positive factors
- Moderate grade for gold
- Significant intercept length
Negative factors
- Apparent width only
- Cut-off grade not specified for this interval
Evidence · table
“1.14”
Context: 16.76
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
CMR26-161Flat · goldGrade: 1.99Grade Unit: g/tIntercept: 3.05 mView all detailsHide details
Identity
- Hole ID
- CMR26-161
- Project
- Flat
- Commodity
- gold
- Region
- usa_ak
- Reported Region
- usa_ak
- Ticker
- TECT.V
Geometry
- Grade
- 1.99
- Grade Unit
- g/t
- Intercept
- 3.05 m
- From
- 39.62 m
- To
- 42.67 m
- Hole Depth
- 144.78 m
- Intercept Depth
- 1.52 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- CMR26-161:39.62-42.67
- Mining Method
- open_pit
Location
- Easting
- 552327
- Northing
- 6917793
- Azimuth
- 110 °
- Dip
- -75 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Global
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Compositing
- Max Dilution
- 3.2 m
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-10-15T00:00:00.000Z
Reasoning: This sub-interval shows moderate gold grade over a good width, contributing to the overall Adit mineralization.
Positive factors
- Moderate grade for gold
- Good intercept length
Negative factors
- Apparent width only
- Cut-off grade not specified for this interval
Evidence · table
“1.99”
Context: 3.05
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
CMR26-161Flat · goldGrade: 0.2Grade Unit: g/tIntercept: 4.57 mView all detailsHide details
Identity
- Hole ID
- CMR26-161
- Project
- Flat
- Commodity
- gold
- Region
- usa_ak
- Reported Region
- usa_ak
- Ticker
- TECT.V
Geometry
- Grade
- 0.2
- Grade Unit
- g/t
- Intercept
- 4.57 m
- From
- 56.39 m
- To
- 60.96 m
- Hole Depth
- 144.78 m
- Intercept Depth
- 1.52 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- CMR26-161:56.39-60.96
- Mining Method
- open_pit
Location
- Easting
- 552327
- Northing
- 6917793
- Azimuth
- 110 °
- Dip
- -75 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Global
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Compositing
- Max Dilution
- 3.2 m
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-10-15T00:00:00.000Z
Reasoning: This intercept shows very low-grade gold over a narrow width, indicating weak mineralization in the Adit zone.
Negative factors
- Low grade for gold
- Narrow intercept length
- Apparent width only
- Cut-off grade not specified for this interval
Evidence · table
“0.20”
Context: 4.57
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
CMR26-161Flat · goldGrade: 0.85Grade Unit: g/tIntercept: 7.62 mView all detailsHide details
Identity
- Hole ID
- CMR26-161
- Project
- Flat
- Commodity
- gold
- Region
- usa_ak
- Reported Region
- usa_ak
- Ticker
- TECT.V
Geometry
- Grade
- 0.85
- Grade Unit
- g/t
- Intercept
- 7.62 m
- From
- 67.06 m
- To
- 74.68 m
- Hole Depth
- 144.78 m
- Intercept Depth
- 1.52 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- CMR26-161:67.06-74.68
- Mining Method
- open_pit
Location
- Easting
- 552327
- Northing
- 6917793
- Azimuth
- 110 °
- Dip
- -75 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Global
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Compositing
- Max Dilution
- 3.2 m
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-10-15T00:00:00.000Z
Reasoning: This intercept shows moderate gold grade over a good width, contributing to the overall Adit mineralization.
Positive factors
- Moderate grade for gold
- Good intercept length
Negative factors
- Apparent width only
- Cut-off grade not specified for this interval
Evidence · table
“0.85”
Context: 7.62
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
CMR26-161Flat · goldGrade: 0.69Grade Unit: g/tIntercept: 15.24 mView all detailsHide details
Identity
- Hole ID
- CMR26-161
- Project
- Flat
- Commodity
- gold
- Region
- usa_ak
- Reported Region
- usa_ak
- Ticker
- TECT.V
Geometry
- Grade
- 0.69
- Grade Unit
- g/t
- Intercept
- 15.24 m
- From
- 88.39 m
- To
- 103.63 m
- Hole Depth
- 144.78 m
- Intercept Depth
- 1.52 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- CMR26-161:88.39-103.63
- Mining Method
- open_pit
Location
- Easting
- 552327
- Northing
- 6917793
- Azimuth
- 110 °
- Dip
- -75 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Global
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Compositing
- Max Dilution
- 3.2 m
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-10-15T00:00:00.000Z
Reasoning: This intercept shows moderate gold grade over a good width, contributing to the overall Adit mineralization.
Positive factors
- Moderate grade for gold
- Good intercept length
Negative factors
- Apparent width only
- Cut-off grade not specified for this interval
Evidence · table
“0.69”
Context: 15.24
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
CMR26-161Flat · goldGrade: 4.95Grade Unit: g/tIntercept: 1.52 mView all detailsHide details
Identity
- Hole ID
- CMR26-161
- Project
- Flat
- Commodity
- gold
- Region
- usa_ak
- Reported Region
- usa_ak
- Ticker
- TECT.V
Geometry
- Grade
- 4.95
- Grade Unit
- g/t
- Intercept
- 1.52 m
- From
- 88.39 m
- To
- 89.92 m
- Hole Depth
- 144.78 m
- Intercept Depth
- 1.52 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- CMR26-161:88.39-89.92
- Mining Method
- open_pit
Location
- Easting
- 552327
- Northing
- 6917793
- Azimuth
- 110 °
- Dip
- -75 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Global
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Compositing
- Max Dilution
- 3.2 m
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-10-15T00:00:00.000Z
Reasoning: This sub-interval shows a strong gold grade over a narrow width, indicating a higher-grade domain within the Adit mineralization.
Positive factors
- Strong grade for gold
Negative factors
- Narrow intercept length
- Apparent width only
- Cut-off grade not specified for this interval
Evidence · table
“4.95”
Context: 1.52
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
CMR26-161Flat · goldGrade: 1.88Grade Unit: g/tIntercept: 6.1 mView all detailsHide details
Identity
- Hole ID
- CMR26-161
- Project
- Flat
- Commodity
- gold
- Region
- usa_ak
- Reported Region
- usa_ak
- Ticker
- TECT.V
Geometry
- Grade
- 1.88
- Grade Unit
- g/t
- Intercept
- 6.1 m
- From
- 129.54 m
- To
- 135.64 m
- Hole Depth
- 144.78 m
- Intercept Depth
- 1.52 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- CMR26-161:129.54-135.64
- Mining Method
- open_pit
Location
- Easting
- 552327
- Northing
- 6917793
- Azimuth
- 110 °
- Dip
- -75 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Global
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Compositing
- Max Dilution
- 3.2 m
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-10-15T00:00:00.000Z
Reasoning: This intercept shows moderate gold grade over a good width, contributing to the overall Adit mineralization.
Positive factors
- Moderate grade for gold
- Good intercept length
Negative factors
- Apparent width only
- Cut-off grade not specified for this interval
Evidence · table
“1.88”
Context: 6.10
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
CMR26-161Flat · goldGrade: 7.15Grade Unit: g/tIntercept: 1.52 mView all detailsHide details
Identity
- Hole ID
- CMR26-161
- Project
- Flat
- Commodity
- gold
- Region
- usa_ak
- Reported Region
- usa_ak
- Ticker
- TECT.V
Geometry
- Grade
- 7.15
- Grade Unit
- g/t
- Intercept
- 1.52 m
- From
- 129.54 m
- To
- 131.06 m
- Hole Depth
- 144.78 m
- Intercept Depth
- 1.52 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- CMR26-161:129.54-131.06
- Mining Method
- open_pit
Location
- Easting
- 552327
- Northing
- 6917793
- Azimuth
- 110 °
- Dip
- -75 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Global
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Compositing
- Max Dilution
- 3.2 m
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-10-15T00:00:00.000Z
Reasoning: This sub-interval shows exceptional gold grade over a narrow width, indicating a very high-grade domain within the Adit mineralization.
Positive factors
- Exceptional grade for gold
Negative factors
- Narrow intercept length
- Apparent width only
- Cut-off grade not specified for this interval
Evidence · table
“7.15”
Context: 1.52
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
CMR26-162Flat · goldGrade: 0.43Grade Unit: g/tIntercept: 27.43 mView all detailsHide details
Identity
- Hole ID
- CMR26-162
- Project
- Flat
- Commodity
- gold
- Region
- usa_ak
- Reported Region
- usa_ak
- Ticker
- TECT.V
Geometry
- Grade
- 0.43
- Grade Unit
- g/t
- Intercept
- 27.43 m
- From
- 1.52 m
- To
- 28.96 m
- Hole Depth
- 166.12 m
- Intercept Depth
- 1.52 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- CMR26-162:1.52-28.96
- Mining Method
- open_pit
Location
- Easting
- 552508
- Northing
- 6917809
- Azimuth
- 110 °
- Dip
- -55 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Global
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Compositing
- Max Dilution
- 3.2 m
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-10-15T00:00:00.000Z
Reasoning: This intercept shows moderate-grade gold over a significant width starting near surface, contributing to the bulk-tonnage potential at Adit.
Positive factors
- Moderate grade for gold
- Significant intercept length
- Near-surface mineralization
Negative factors
- Apparent width only
- Cut-off grade not specified for this interval
Evidence · table
“0.43”
Context: 27.43
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
CMR26-162Flat · goldGrade: 3.29Grade Unit: g/tIntercept: 1.52 mView all detailsHide details
Identity
- Hole ID
- CMR26-162
- Project
- Flat
- Commodity
- gold
- Region
- usa_ak
- Reported Region
- usa_ak
- Ticker
- TECT.V
Geometry
- Grade
- 3.29
- Grade Unit
- g/t
- Intercept
- 1.52 m
- From
- 1.52 m
- To
- 3.05 m
- Hole Depth
- 166.12 m
- Intercept Depth
- 1.52 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- CMR26-162:1.52-3.05
- Mining Method
- open_pit
Location
- Easting
- 552508
- Northing
- 6917809
- Azimuth
- 110 °
- Dip
- -55 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Global
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Compositing
- Max Dilution
- 3.2 m
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-10-15T00:00:00.000Z
Reasoning: This sub-interval shows a strong gold grade over a narrow width, indicating a high-grade domain near surface within the Adit mineralization.
Positive factors
- Strong grade for gold
- Near-surface mineralization
Negative factors
- Narrow intercept length
- Apparent width only
- Cut-off grade not specified for this interval
Evidence · table
“3.29”
Context: 1.52
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
CMR26-162Flat · goldGrade: 0.51Grade Unit: g/tIntercept: 9.14 mView all detailsHide details
Identity
- Hole ID
- CMR26-162
- Project
- Flat
- Commodity
- gold
- Region
- usa_ak
- Reported Region
- usa_ak
- Ticker
- TECT.V
Geometry
- Grade
- 0.51
- Grade Unit
- g/t
- Intercept
- 9.14 m
- From
- 16.76 m
- To
- 25.91 m
- Hole Depth
- 166.12 m
- Intercept Depth
- 1.52 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- CMR26-162:16.76-25.91
- Mining Method
- open_pit
Location
- Easting
- 552508
- Northing
- 6917809
- Azimuth
- 110 °
- Dip
- -55 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Global
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Compositing
- Max Dilution
- 3.2 m
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-10-15T00:00:00.000Z
Reasoning: This sub-interval shows moderate gold grade over a good width, contributing to the overall Adit mineralization.
Positive factors
- Moderate grade for gold
- Good intercept length
Negative factors
- Apparent width only
- Cut-off grade not specified for this interval
Evidence · table
“0.51”
Context: 9.14
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
CMR26-162Flat · goldGrade: 3.69Grade Unit: g/tIntercept: 1.52 mView all detailsHide details
Identity
- Hole ID
- CMR26-162
- Project
- Flat
- Commodity
- gold
- Region
- usa_ak
- Reported Region
- usa_ak
- Ticker
- TECT.V
Geometry
- Grade
- 3.69
- Grade Unit
- g/t
- Intercept
- 1.52 m
- From
- 42.67 m
- To
- 44.2 m
- Hole Depth
- 166.12 m
- Intercept Depth
- 1.52 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- CMR26-162:42.67-44.2
- Mining Method
- open_pit
Location
- Easting
- 552508
- Northing
- 6917809
- Azimuth
- 110 °
- Dip
- -55 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Global
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Compositing
- Max Dilution
- 3.2 m
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-10-15T00:00:00.000Z
Reasoning: This intercept shows a strong gold grade over a narrow width, indicating a high-grade domain within the Adit mineralization.
Positive factors
- Strong grade for gold
Negative factors
- Narrow intercept length
- Apparent width only
- Cut-off grade not specified for this interval
Evidence · table
“3.69”
Context: 1.52
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
CMR26-162Flat · goldGrade: 1.06Grade Unit: g/tIntercept: 19.81 mView all detailsHide details
Identity
- Hole ID
- CMR26-162
- Project
- Flat
- Commodity
- gold
- Region
- usa_ak
- Reported Region
- usa_ak
- Ticker
- TECT.V
Geometry
- Grade
- 1.06
- Grade Unit
- g/t
- Intercept
- 19.81 m
- From
- 71.63 m
- To
- 91.44 m
- Hole Depth
- 166.12 m
- Intercept Depth
- 1.52 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- CMR26-162:71.63-91.44
- Mining Method
- open_pit
Location
- Easting
- 552508
- Northing
- 6917809
- Azimuth
- 110 °
- Dip
- -55 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Global
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Compositing
- Max Dilution
- 3.2 m
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-10-15T00:00:00.000Z
Reasoning: This intercept shows moderate-grade gold over a significant width, contributing to the overall Adit mineralization.
Positive factors
- Moderate grade for gold
- Significant intercept length
Negative factors
- Apparent width only
- Cut-off grade not specified for this interval
Evidence · table
“1.06”
Context: 19.81
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
CMR26-162Flat · goldGrade: 1.71Grade Unit: g/tIntercept: 10.67 mView all detailsHide details
Identity
- Hole ID
- CMR26-162
- Project
- Flat
- Commodity
- gold
- Region
- usa_ak
- Reported Region
- usa_ak
- Ticker
- TECT.V
Geometry
- Grade
- 1.71
- Grade Unit
- g/t
- Intercept
- 10.67 m
- From
- 80.77 m
- To
- 91.44 m
- Hole Depth
- 166.12 m
- Intercept Depth
- 1.52 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- CMR26-162:80.77-91.44
- Mining Method
- open_pit
Location
- Easting
- 552508
- Northing
- 6917809
- Azimuth
- 110 °
- Dip
- -55 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Global
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Compositing
- Max Dilution
- 3.2 m
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-10-15T00:00:00.000Z
Reasoning: This sub-interval shows moderate gold grade over a good width, contributing to the overall Adit mineralization.
Positive factors
- Moderate grade for gold
- Good intercept length
Negative factors
- Apparent width only
- Cut-off grade not specified for this interval
Evidence · table
“1.71”
Context: 10.67
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
CMR26-162Flat · goldGrade: 0.45Grade Unit: g/tIntercept: 12.19 mView all detailsHide details
Identity
- Hole ID
- CMR26-162
- Project
- Flat
- Commodity
- gold
- Region
- usa_ak
- Reported Region
- usa_ak
- Ticker
- TECT.V
Geometry
- Grade
- 0.45
- Grade Unit
- g/t
- Intercept
- 12.19 m
- From
- 97.54 m
- To
- 109.73 m
- Hole Depth
- 166.12 m
- Intercept Depth
- 1.52 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- CMR26-162:97.54-109.73
- Mining Method
- open_pit
Location
- Easting
- 552508
- Northing
- 6917809
- Azimuth
- 110 °
- Dip
- -55 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Global
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Compositing
- Max Dilution
- 3.2 m
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-10-15T00:00:00.000Z
Reasoning: This intercept shows moderate gold grade over a good width, contributing to the overall Adit mineralization.
Positive factors
- Moderate grade for gold
- Good intercept length
Negative factors
- Apparent width only
- Cut-off grade not specified for this interval
Evidence · table
“0.45”
Context: 12.19
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
CMR26-162Flat · goldGrade: 0.69Grade Unit: g/tIntercept: 10.67 mView all detailsHide details
Identity
- Hole ID
- CMR26-162
- Project
- Flat
- Commodity
- gold
- Region
- usa_ak
- Reported Region
- usa_ak
- Ticker
- TECT.V
Geometry
- Grade
- 0.69
- Grade Unit
- g/t
- Intercept
- 10.67 m
- From
- 117.35 m
- To
- 128.02 m
- Hole Depth
- 166.12 m
- Intercept Depth
- 1.52 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- CMR26-162:117.35-128.02
- Mining Method
- open_pit
Location
- Easting
- 552508
- Northing
- 6917809
- Azimuth
- 110 °
- Dip
- -55 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Global
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Compositing
- Max Dilution
- 3.2 m
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-10-15T00:00:00.000Z
Reasoning: This intercept shows moderate gold grade over a good width, contributing to the overall Adit mineralization.
Positive factors
- Moderate grade for gold
- Good intercept length
Negative factors
- Apparent width only
- Cut-off grade not specified for this interval
Evidence · table
“0.69”
Context: 10.67
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
CMR26-162Flat · goldGrade: 0.87Grade Unit: g/tIntercept: 7.62 mView all detailsHide details
Identity
- Hole ID
- CMR26-162
- Project
- Flat
- Commodity
- gold
- Region
- usa_ak
- Reported Region
- usa_ak
- Ticker
- TECT.V
Geometry
- Grade
- 0.87
- Grade Unit
- g/t
- Intercept
- 7.62 m
- From
- 120.4 m
- To
- 128.02 m
- Hole Depth
- 166.12 m
- Intercept Depth
- 1.52 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- CMR26-162:120.4-128.02
- Mining Method
- open_pit
Location
- Easting
- 552508
- Northing
- 6917809
- Azimuth
- 110 °
- Dip
- -55 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Global
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Compositing
- Max Dilution
- 3.2 m
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-10-15T00:00:00.000Z
Reasoning: This sub-interval shows moderate gold grade over a good width, contributing to the overall Adit mineralization.
Positive factors
- Moderate grade for gold
- Good intercept length
Negative factors
- Apparent width only
- Cut-off grade not specified for this interval
Evidence · table
“0.87”
Context: 7.62
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
CMR26-162Flat · goldGrade: 0.64Grade Unit: g/tIntercept: 33.53 mView all detailsHide details
Identity
- Hole ID
- CMR26-162
- Project
- Flat
- Commodity
- gold
- Region
- usa_ak
- Reported Region
- usa_ak
- Ticker
- TECT.V
Geometry
- Grade
- 0.64
- Grade Unit
- g/t
- Intercept
- 33.53 m
- From
- 132.59 m
- To
- 166.12 m
- Hole Depth
- 166.12 m
- Intercept Depth
- 1.52 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- CMR26-162:132.59-166.12
- Mining Method
- open_pit
Location
- Easting
- 552508
- Northing
- 6917809
- Azimuth
- 110 °
- Dip
- -55 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Global
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Compositing
- Max Dilution
- 3.2 m
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-10-15T00:00:00.000Z
Reasoning: This intercept shows moderate-grade gold over a significant width and ends in mineralization, indicating potential for further extension at Adit.
Positive factors
- Moderate grade for gold
- Significant intercept length
- Ends in mineralization
Negative factors
- Apparent width only
- Cut-off grade not specified for this interval
Evidence · table
“0.64”
Context: 33.53
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
CMR26-162Flat · goldGrade: 0.97Grade Unit: g/tIntercept: 10.67 mView all detailsHide details
Identity
- Hole ID
- CMR26-162
- Project
- Flat
- Commodity
- gold
- Region
- usa_ak
- Reported Region
- usa_ak
- Ticker
- TECT.V
Geometry
- Grade
- 0.97
- Grade Unit
- g/t
- Intercept
- 10.67 m
- From
- 134.11 m
- To
- 144.78 m
- Hole Depth
- 166.12 m
- Intercept Depth
- 1.52 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- CMR26-162:134.11-144.78
- Mining Method
- open_pit
Location
- Easting
- 552508
- Northing
- 6917809
- Azimuth
- 110 °
- Dip
- -55 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Global
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Compositing
- Max Dilution
- 3.2 m
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-10-15T00:00:00.000Z
Reasoning: This sub-interval shows moderate gold grade over a good width, contributing to the overall Adit mineralization.
Positive factors
- Moderate grade for gold
- Good intercept length
Negative factors
- Apparent width only
- Cut-off grade not specified for this interval
Evidence · table
“0.97”
Context: 10.67
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
CMR26-162Flat · goldGrade: 0.82Grade Unit: g/tIntercept: 10.67 mView all detailsHide details
Identity
- Hole ID
- CMR26-162
- Project
- Flat
- Commodity
- gold
- Region
- usa_ak
- Reported Region
- usa_ak
- Ticker
- TECT.V
Geometry
- Grade
- 0.82
- Grade Unit
- g/t
- Intercept
- 10.67 m
- From
- 150.88 m
- To
- 161.54 m
- Hole Depth
- 166.12 m
- Intercept Depth
- 1.52 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- CMR26-162:150.88-161.54
- Mining Method
- open_pit
Location
- Easting
- 552508
- Northing
- 6917809
- Azimuth
- 110 °
- Dip
- -55 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Global
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Compositing
- Max Dilution
- 3.2 m
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-10-15T00:00:00.000Z
Reasoning: This sub-interval shows moderate gold grade over a good width, contributing to the overall Adit mineralization.
Positive factors
- Moderate grade for gold
- Good intercept length
Negative factors
- Apparent width only
- Cut-off grade not specified for this interval
Evidence · table
“0.82”
Context: 10.67
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
CMR26-163Flat · goldGrade: 0.57Grade Unit: g/tIntercept: 6.1 mView all detailsHide details
Identity
- Hole ID
- CMR26-163
- Project
- Flat
- Commodity
- gold
- Region
- usa_ak
- Reported Region
- usa_ak
- Ticker
- TECT.V
Geometry
- Grade
- 0.57
- Grade Unit
- g/t
- Intercept
- 6.1 m
- From
- 0 m
- To
- 6.1 m
- Hole Depth
- 176.78 m
- Intercept Depth
- 0 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- CMR26-163:0-6.1
- Mining Method
- open_pit
Location
- Easting
- 552393
- Northing
- 6917756
- Azimuth
- 110 °
- Dip
- -55 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Global
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Compositing
- Max Dilution
- 3.2 m
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-10-15T00:00:00.000Z
Reasoning: This intercept shows moderate-grade gold over a good width starting at surface, contributing to the overall Adit mineralization.
Positive factors
- Moderate grade for gold
- Near-surface mineralization
Negative factors
- Apparent width only
- Cut-off grade not specified for this interval
Evidence · table
“0.57”
Context: 6.10
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
CMR26-163Flat · goldGrade: 0.98Grade Unit: g/tIntercept: 3.05 mView all detailsHide details
Identity
- Hole ID
- CMR26-163
- Project
- Flat
- Commodity
- gold
- Region
- usa_ak
- Reported Region
- usa_ak
- Ticker
- TECT.V
Geometry
- Grade
- 0.98
- Grade Unit
- g/t
- Intercept
- 3.05 m
- From
- 0 m
- To
- 3.05 m
- Hole Depth
- 176.78 m
- Intercept Depth
- 0 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- CMR26-163:0-3.05
- Mining Method
- open_pit
Location
- Easting
- 552393
- Northing
- 6917756
- Azimuth
- 110 °
- Dip
- -55 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Global
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Compositing
- Max Dilution
- 3.2 m
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-10-15T00:00:00.000Z
Reasoning: This sub-interval shows moderate gold grade over a narrow width starting at surface, contributing to the overall Adit mineralization.
Positive factors
- Moderate grade for gold
- Near-surface mineralization
Negative factors
- Narrow intercept length
- Apparent width only
- Cut-off grade not specified for this interval
Evidence · table
“0.98”
Context: 3.05
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
CMR26-163Flat · goldGrade: 0.61Grade Unit: g/tIntercept: 9.14 mView all detailsHide details
Identity
- Hole ID
- CMR26-163
- Project
- Flat
- Commodity
- gold
- Region
- usa_ak
- Reported Region
- usa_ak
- Ticker
- TECT.V
Geometry
- Grade
- 0.61
- Grade Unit
- g/t
- Intercept
- 9.14 m
- From
- 21.34 m
- To
- 30.48 m
- Hole Depth
- 176.78 m
- Intercept Depth
- 0 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- CMR26-163:21.34-30.48
- Mining Method
- open_pit
Location
- Easting
- 552393
- Northing
- 6917756
- Azimuth
- 110 °
- Dip
- -55 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Global
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Compositing
- Max Dilution
- 3.2 m
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-10-15T00:00:00.000Z
Reasoning: This intercept shows moderate gold grade over a good width, contributing to the overall Adit mineralization.
Positive factors
- Moderate grade for gold
- Good intercept length
Negative factors
- Apparent width only
- Cut-off grade not specified for this interval
Evidence · table
“0.61”
Context: 9.14
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
CMR26-163Flat · goldGrade: 0.79Grade Unit: g/tIntercept: 6.1 mView all detailsHide details
Identity
- Hole ID
- CMR26-163
- Project
- Flat
- Commodity
- gold
- Region
- usa_ak
- Reported Region
- usa_ak
- Ticker
- TECT.V
Geometry
- Grade
- 0.79
- Grade Unit
- g/t
- Intercept
- 6.1 m
- From
- 21.34 m
- To
- 27.43 m
- Hole Depth
- 176.78 m
- Intercept Depth
- 0 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- CMR26-163:21.34-27.43
- Mining Method
- open_pit
Location
- Easting
- 552393
- Northing
- 6917756
- Azimuth
- 110 °
- Dip
- -55 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Global
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Compositing
- Max Dilution
- 3.2 m
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-10-15T00:00:00.000Z
Reasoning: This sub-interval shows moderate gold grade over a good width, contributing to the overall Adit mineralization.
Positive factors
- Moderate grade for gold
- Good intercept length
Negative factors
- Apparent width only
- Cut-off grade not specified for this interval
Evidence · table
“0.79”
Context: 6.10
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
CMR26-163Flat · goldGrade: 2.12Grade Unit: g/tIntercept: 1.52 mView all detailsHide details
Identity
- Hole ID
- CMR26-163
- Project
- Flat
- Commodity
- gold
- Region
- usa_ak
- Reported Region
- usa_ak
- Ticker
- TECT.V
Geometry
- Grade
- 2.12
- Grade Unit
- g/t
- Intercept
- 1.52 m
- From
- 25.91 m
- To
- 27.43 m
- Hole Depth
- 176.78 m
- Intercept Depth
- 0 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- CMR26-163:25.91-27.43
- Mining Method
- open_pit
Location
- Easting
- 552393
- Northing
- 6917756
- Azimuth
- 110 °
- Dip
- -55 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Global
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Compositing
- Max Dilution
- 3.2 m
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-10-15T00:00:00.000Z
Reasoning: This sub-interval shows a strong gold grade over a narrow width, indicating a higher-grade domain within the Adit mineralization.
Positive factors
- Strong grade for gold
Negative factors
- Narrow intercept length
- Apparent width only
- Cut-off grade not specified for this interval
Evidence · table
“2.12”
Context: 1.52
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
CMR26-163Flat · goldGrade: 1.27Grade Unit: g/tIntercept: 4.57 mView all detailsHide details
Identity
- Hole ID
- CMR26-163
- Project
- Flat
- Commodity
- gold
- Region
- usa_ak
- Reported Region
- usa_ak
- Ticker
- TECT.V
Geometry
- Grade
- 1.27
- Grade Unit
- g/t
- Intercept
- 4.57 m
- From
- 59.44 m
- To
- 64.01 m
- Hole Depth
- 176.78 m
- Intercept Depth
- 0 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- CMR26-163:59.44-64.01
- Mining Method
- open_pit
Location
- Easting
- 552393
- Northing
- 6917756
- Azimuth
- 110 °
- Dip
- -55 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Global
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Compositing
- Max Dilution
- 3.2 m
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-10-15T00:00:00.000Z
Reasoning: This intercept shows moderate gold grade over a narrow width, contributing to the overall Adit mineralization.
Positive factors
- Moderate grade for gold
Negative factors
- Narrow intercept length
- Apparent width only
- Cut-off grade not specified for this interval
Evidence · table
“1.27”
Context: 4.57
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
CMR26-163Flat · goldGrade: 0.93Grade Unit: g/tIntercept: 9.14 mView all detailsHide details
Identity
- Hole ID
- CMR26-163
- Project
- Flat
- Commodity
- gold
- Region
- usa_ak
- Reported Region
- usa_ak
- Ticker
- TECT.V
Geometry
- Grade
- 0.93
- Grade Unit
- g/t
- Intercept
- 9.14 m
- From
- 68.58 m
- To
- 77.72 m
- Hole Depth
- 176.78 m
- Intercept Depth
- 0 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- CMR26-163:68.58-77.72
- Mining Method
- open_pit
Location
- Easting
- 552393
- Northing
- 6917756
- Azimuth
- 110 °
- Dip
- -55 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Global
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Compositing
- Max Dilution
- 3.2 m
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-10-15T00:00:00.000Z
Reasoning: This intercept shows moderate gold grade over a good width, contributing to the overall Adit mineralization.
Positive factors
- Moderate grade for gold
- Good intercept length
Negative factors
- Apparent width only
- Cut-off grade not specified for this interval
Evidence · table
“0.93”
Context: 9.14
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
CMR26-163Flat · goldGrade: 0.31Grade Unit: g/tIntercept: 10.67 mView all detailsHide details
Identity
- Hole ID
- CMR26-163
- Project
- Flat
- Commodity
- gold
- Region
- usa_ak
- Reported Region
- usa_ak
- Ticker
- TECT.V
Geometry
- Grade
- 0.31
- Grade Unit
- g/t
- Intercept
- 10.67 m
- From
- 99.06 m
- To
- 109.73 m
- Hole Depth
- 176.78 m
- Intercept Depth
- 0 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- CMR26-163:99.06-109.73
- Mining Method
- open_pit
Location
- Easting
- 552393
- Northing
- 6917756
- Azimuth
- 110 °
- Dip
- -55 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Global
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Compositing
- Max Dilution
- 3.2 m
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-10-15T00:00:00.000Z
Reasoning: This intercept shows moderate gold grade over a good width, contributing to the overall Adit mineralization.
Positive factors
- Moderate grade for gold
- Good intercept length
Negative factors
- Apparent width only
- Cut-off grade not specified for this interval
Evidence · table
“0.31”
Context: 10.67
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
CMR26-163Flat · goldGrade: 1.06Grade Unit: g/tIntercept: 1.52 mView all detailsHide details
Identity
- Hole ID
- CMR26-163
- Project
- Flat
- Commodity
- gold
- Region
- usa_ak
- Reported Region
- usa_ak
- Ticker
- TECT.V
Geometry
- Grade
- 1.06
- Grade Unit
- g/t
- Intercept
- 1.52 m
- From
- 102.11 m
- To
- 103.63 m
- Hole Depth
- 176.78 m
- Intercept Depth
- 0 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- CMR26-163:102.11-103.63
- Mining Method
- open_pit
Location
- Easting
- 552393
- Northing
- 6917756
- Azimuth
- 110 °
- Dip
- -55 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Global
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Compositing
- Max Dilution
- 3.2 m
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-10-15T00:00:00.000Z
Reasoning: This sub-interval shows moderate gold grade over a narrow width, contributing to the overall Adit mineralization.
Positive factors
- Moderate grade for gold
Negative factors
- Narrow intercept length
- Apparent width only
- Cut-off grade not specified for this interval
Evidence · table
“1.06”
Context: 1.52
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
CMR26-163Flat · goldGrade: 0.21Grade Unit: g/tIntercept: 10.67 mView all detailsHide details
Identity
- Hole ID
- CMR26-163
- Project
- Flat
- Commodity
- gold
- Region
- usa_ak
- Reported Region
- usa_ak
- Ticker
- TECT.V
Geometry
- Grade
- 0.21
- Grade Unit
- g/t
- Intercept
- 10.67 m
- From
- 118.87 m
- To
- 129.54 m
- Hole Depth
- 176.78 m
- Intercept Depth
- 0 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- CMR26-163:118.87-129.54
- Mining Method
- open_pit
Location
- Easting
- 552393
- Northing
- 6917756
- Azimuth
- 110 °
- Dip
- -55 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Global
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Compositing
- Max Dilution
- 3.2 m
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-10-15T00:00:00.000Z
Reasoning: This intercept shows very low-grade gold over a moderate width, indicating weak mineralization in the Adit zone.
Negative factors
- Low grade for gold
- Apparent width only
- Cut-off grade not specified for this interval
Evidence · table
“0.21”
Context: 10.67
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
CMR26-163Flat · goldGrade: 1.52Grade Unit: g/tIntercept: 42.67 mView all detailsHide details
Identity
- Hole ID
- CMR26-163
- Project
- Flat
- Commodity
- gold
- Region
- usa_ak
- Reported Region
- usa_ak
- Ticker
- TECT.V
Geometry
- Grade
- 1.52
- Grade Unit
- g/t
- Intercept
- 42.67 m
- From
- 134.11 m
- To
- 176.78 m
- Hole Depth
- 176.78 m
- Intercept Depth
- 0 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- CMR26-163:134.11-176.78
- Mining Method
- open_pit
Location
- Easting
- 552393
- Northing
- 6917756
- Azimuth
- 110 °
- Dip
- -55 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Global
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Compositing
- Max Dilution
- 3.2 m
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-10-15T00:00:00.000Z
Reasoning: This intercept shows moderate-grade gold over a very significant width and ends in mineralization, indicating potential for further extension at Adit.
Positive factors
- Moderate grade for gold
- Very significant intercept length
- Ends in mineralization
Negative factors
- Apparent width only
- Cut-off grade not specified for this interval
Evidence · table
“1.52”
Context: 42.67
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
CMR26-163Flat · goldGrade: 3.84Grade Unit: g/tIntercept: 13.72 mView all detailsHide details
Identity
- Hole ID
- CMR26-163
- Project
- Flat
- Commodity
- gold
- Region
- usa_ak
- Reported Region
- usa_ak
- Ticker
- TECT.V
Geometry
- Grade
- 3.84
- Grade Unit
- g/t
- Intercept
- 13.72 m
- From
- 163.07 m
- To
- 176.78 m
- Hole Depth
- 176.78 m
- Intercept Depth
- 0 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- CMR26-163:163.07-176.78
- Mining Method
- open_pit
Location
- Easting
- 552393
- Northing
- 6917756
- Azimuth
- 110 °
- Dip
- -55 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Global
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Compositing
- Max Dilution
- 3.2 m
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-10-15T00:00:00.000Z
Reasoning: This sub-interval shows strong gold grade over a significant width and ends in mineralization, indicating potential for further extension at Adit.
Positive factors
- Strong grade for gold
- Significant intercept length
- Ends in mineralization
Negative factors
- Apparent width only
- Cut-off grade not specified for this interval
Evidence · table
“3.84”
Context: 13.72
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
CMR26-163Flat · goldGrade: 27.35Grade Unit: g/tIntercept: 1.52 mView all detailsHide details
Identity
- Hole ID
- CMR26-163
- Project
- Flat
- Commodity
- gold
- Region
- usa_ak
- Reported Region
- usa_ak
- Ticker
- TECT.V
Geometry
- Grade
- 27.35
- Grade Unit
- g/t
- Intercept
- 1.52 m
- From
- 163.07 m
- To
- 164.59 m
- Hole Depth
- 176.78 m
- Intercept Depth
- 0 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- CMR26-163:163.07-164.59
- Mining Method
- open_pit
Location
- Easting
- 552393
- Northing
- 6917756
- Azimuth
- 110 °
- Dip
- -55 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Global
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Compositing
- Max Dilution
- 3.2 m
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-10-15T00:00:00.000Z
Reasoning: This sub-interval shows exceptional gold grade over a narrow width and ends in mineralization, indicating a very high-grade domain with potential for further extension at Adit.
Positive factors
- Exceptional grade for gold
- Ends in mineralization
Negative factors
- Narrow intercept length
- Apparent width only
- Cut-off grade not specified for this interval
Evidence · table
“27.35”
Context: 1.52
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
CMR26-163Flat · goldGrade: 2.85Grade Unit: g/tIntercept: 3.05 mView all detailsHide details
Identity
- Hole ID
- CMR26-163
- Project
- Flat
- Commodity
- gold
- Region
- usa_ak
- Reported Region
- usa_ak
- Ticker
- TECT.V
Geometry
- Grade
- 2.85
- Grade Unit
- g/t
- Intercept
- 3.05 m
- From
- 172.21 m
- To
- 175.26 m
- Hole Depth
- 176.78 m
- Intercept Depth
- 0 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- CMR26-163:172.21-175.26
- Mining Method
- open_pit
Location
- Easting
- 552393
- Northing
- 6917756
- Azimuth
- 110 °
- Dip
- -55 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Global
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Compositing
- Max Dilution
- 3.2 m
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-10-15T00:00:00.000Z
Reasoning: This sub-interval shows strong gold grade over a narrow width and ends in mineralization, indicating a high-grade domain with potential for further extension at Adit.
Positive factors
- Strong grade for gold
- Ends in mineralization
Negative factors
- Narrow intercept length
- Apparent width only
- Cut-off grade not specified for this interval
Evidence · table
“2.85”
Context: 3.05
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
CMR26-166Flat · goldGrade: 0.4Grade Unit: g/tIntercept: 35.05 mView all detailsHide details
Identity
- Hole ID
- CMR26-166
- Project
- Flat
- Commodity
- gold
- Region
- usa_ak
- Reported Region
- usa_ak
- Ticker
- TECT.V
Geometry
- Grade
- 0.4
- Grade Unit
- g/t
- Intercept
- 35.05 m
- From
- 0 m
- To
- 35.05 m
- Hole Depth
- 48.77 m
- Intercept Depth
- 0 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- CMR26-166:0-35.05
- Mining Method
- open_pit
Location
- Easting
- 552204
- Northing
- 6918399
- Azimuth
- 110 °
- Dip
- -55 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Global
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Compositing
- Max Dilution
- 3.2 m
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-10-15T00:00:00.000Z
Reasoning: This intercept shows moderate-grade gold over a significant width starting at surface and ends in mineralization, indicating potential for further extension at Alpha Bowl.
Positive factors
- Moderate grade for gold
- Significant intercept length
- Near-surface mineralization
- Ends in mineralization
Negative factors
- Apparent width only
- Cut-off grade not specified for this interval
Evidence · table
“0.40”
Context: 35.05
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
CMR26-166Flat · goldGrade: 0.94Grade Unit: g/tIntercept: 10.67 mView all detailsHide details
Identity
- Hole ID
- CMR26-166
- Project
- Flat
- Commodity
- gold
- Region
- usa_ak
- Reported Region
- usa_ak
- Ticker
- TECT.V
Geometry
- Grade
- 0.94
- Grade Unit
- g/t
- Intercept
- 10.67 m
- From
- 21.34 m
- To
- 32 m
- Hole Depth
- 48.77 m
- Intercept Depth
- 0 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- CMR26-166:21.34-32
- Mining Method
- open_pit
Location
- Easting
- 552204
- Northing
- 6918399
- Azimuth
- 110 °
- Dip
- -55 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Global
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Compositing
- Max Dilution
- 3.2 m
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-10-15T00:00:00.000Z
Reasoning: This sub-interval shows moderate gold grade over a good width, contributing to the overall Alpha Bowl mineralization.
Positive factors
- Moderate grade for gold
- Good intercept length
Negative factors
- Apparent width only
- Cut-off grade not specified for this interval
Evidence · table
“0.94”
Context: 10.67
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
CMR26-166Flat · goldGrade: 2.23Grade Unit: g/tIntercept: 3.05 mView all detailsHide details
Identity
- Hole ID
- CMR26-166
- Project
- Flat
- Commodity
- gold
- Region
- usa_ak
- Reported Region
- usa_ak
- Ticker
- TECT.V
Geometry
- Grade
- 2.23
- Grade Unit
- g/t
- Intercept
- 3.05 m
- From
- 21.34 m
- To
- 24.38 m
- Hole Depth
- 48.77 m
- Intercept Depth
- 0 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- CMR26-166:21.34-24.38
- Mining Method
- open_pit
Location
- Easting
- 552204
- Northing
- 6918399
- Azimuth
- 110 °
- Dip
- -55 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Global
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Compositing
- Max Dilution
- 3.2 m
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-10-15T00:00:00.000Z
Reasoning: This sub-interval shows strong gold grade over a narrow width, indicating a higher-grade domain within the Alpha Bowl mineralization.
Positive factors
- Strong grade for gold
Negative factors
- Narrow intercept length
- Apparent width only
- Cut-off grade not specified for this interval
Evidence · table
“2.23”
Context: 3.05
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
CMR26-166Flat · goldGrade: 0.25Grade Unit: g/tIntercept: 4.57 mView all detailsHide details
Identity
- Hole ID
- CMR26-166
- Project
- Flat
- Commodity
- gold
- Region
- usa_ak
- Reported Region
- usa_ak
- Ticker
- TECT.V
Geometry
- Grade
- 0.25
- Grade Unit
- g/t
- Intercept
- 4.57 m
- From
- 44.2 m
- To
- 48.77 m
- Hole Depth
- 48.77 m
- Intercept Depth
- 0 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- CMR26-166:44.2-48.77
- Mining Method
- open_pit
Location
- Easting
- 552204
- Northing
- 6918399
- Azimuth
- 110 °
- Dip
- -55 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Global
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Compositing
- Max Dilution
- 3.2 m
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-10-15T00:00:00.000Z
Reasoning: This intercept shows very low-grade gold over a narrow width, indicating weak mineralization in the Alpha Bowl zone.
Negative factors
- Low grade for gold
- Narrow intercept length
- Apparent width only
- Cut-off grade not specified for this interval
Evidence · table
“0.25”
Context: 4.57
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
CMR26-170Flat · goldGrade: 1.86Grade Unit: g/tIntercept: 80.77 mView all detailsHide details
Identity
- Hole ID
- CMR26-170
- Project
- Flat
- Commodity
- gold
- Region
- usa_ak
- Reported Region
- usa_ak
- Ticker
- TECT.V
Geometry
- Grade
- 1.86
- Grade Unit
- g/t
- Intercept
- 80.77 m
- From
- 0 m
- To
- 80.77 m
- Hole Depth
- 80.77 m
- Intercept Depth
- 0 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- CMR26-170:0-80.77
- Mining Method
- open_pit
Location
- Easting
- 552243
- Northing
- 6918386
- Azimuth
- 110 °
- Dip
- -54 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Global
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Compositing
- Max Dilution
- 3.2 m
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-10-15T00:00:00.000Z
Reasoning: This exceptional intercept shows strong gold grade over an exceptional width starting at surface and ends in mineralization, indicating significant bulk-tonnage potential and open extensions at Alpha Bowl. It significantly exceeds prior project averages.
Positive factors
- Strong grade for gold
- Exceptional intercept length
- Near-surface mineralization
- Ends in mineralization
- Significantly exceeds project average grade and GT product
Negative factors
- Apparent width only
- Cut-off grade not specified for this interval
Evidence · table
“1.86”
Context: 80.77
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
CMR26-170Flat · goldGrade: 2.41Grade Unit: g/tIntercept: 59.44 mView all detailsHide details
Identity
- Hole ID
- CMR26-170
- Project
- Flat
- Commodity
- gold
- Region
- usa_ak
- Reported Region
- usa_ak
- Ticker
- TECT.V
Geometry
- Grade
- 2.41
- Grade Unit
- g/t
- Intercept
- 59.44 m
- From
- 1.52 m
- To
- 60.96 m
- Hole Depth
- 80.77 m
- Intercept Depth
- 0 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- CMR26-170:1.52-60.96
- Mining Method
- open_pit
Location
- Easting
- 552243
- Northing
- 6918386
- Azimuth
- 110 °
- Dip
- -54 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Global
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Compositing
- Max Dilution
- 3.2 m
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-10-15T00:00:00.000Z
Reasoning: This exceptional sub-interval shows strong gold grade over an exceptional width starting near surface, indicating significant bulk-tonnage potential at Alpha Bowl. It significantly exceeds prior project averages.
Positive factors
- Strong grade for gold
- Exceptional intercept length
- Near-surface mineralization
- Significantly exceeds project average grade and GT product
Negative factors
- Apparent width only
- Cut-off grade not specified for this interval
Evidence · table
“2.41”
Context: 59.44
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
CMR26-170Flat · goldGrade: 11.82Grade Unit: g/tIntercept: 10.67 mView all detailsHide details
Identity
- Hole ID
- CMR26-170
- Project
- Flat
- Commodity
- gold
- Region
- usa_ak
- Reported Region
- usa_ak
- Ticker
- TECT.V
Geometry
- Grade
- 11.82
- Grade Unit
- g/t
- Intercept
- 10.67 m
- From
- 24.38 m
- To
- 35.05 m
- Hole Depth
- 80.77 m
- Intercept Depth
- 0 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- CMR26-170:24.38-35.05
- Mining Method
- open_pit
Location
- Easting
- 552243
- Northing
- 6918386
- Azimuth
- 110 °
- Dip
- -54 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Global
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Compositing
- Max Dilution
- 3.2 m
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-10-15T00:00:00.000Z
Reasoning: This exceptional sub-interval shows exceptional gold grade over a significant width starting near surface, indicating a very high-grade domain within Alpha Bowl. It significantly exceeds prior project averages and global peer benchmarks.
Positive factors
- Exceptional grade for gold
- Significant intercept length
- Near-surface mineralization
- Significantly exceeds project average grade and GT product
Negative factors
- Apparent width only
- Cut-off grade not specified for this interval
Evidence · table
“11.82”
Context: 10.67
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
CMR26-170Flat · goldGrade: 39.96Grade Unit: g/tIntercept: 3.05 mView all detailsHide details
Identity
- Hole ID
- CMR26-170
- Project
- Flat
- Commodity
- gold
- Region
- usa_ak
- Reported Region
- usa_ak
- Ticker
- TECT.V
Geometry
- Grade
- 39.96
- Grade Unit
- g/t
- Intercept
- 3.05 m
- From
- 24.38 m
- To
- 27.43 m
- Hole Depth
- 80.77 m
- Intercept Depth
- 0 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- CMR26-170:24.38-27.43
- Mining Method
- open_pit
Location
- Easting
- 552243
- Northing
- 6918386
- Azimuth
- 110 °
- Dip
- -54 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Global
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Compositing
- Max Dilution
- 3.2 m
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-10-15T00:00:00.000Z
Reasoning: This bonanza-grade sub-interval shows exceptional gold grade over a good width starting near surface, indicating a very high-grade domain within Alpha Bowl. It significantly exceeds prior project averages and global peer benchmarks.
Positive factors
- Bonanza grade for gold
- Near-surface mineralization
- Significantly exceeds project average grade and GT product
Negative factors
- Narrow intercept length
- Apparent width only
- Cut-off grade not specified for this interval
Evidence · table
“39.96”
Context: 3.05
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
CMR26-171Flat · goldGrade: 0.5Grade Unit: g/tIntercept: 19.81 mView all detailsHide details
Identity
- Hole ID
- CMR26-171
- Project
- Flat
- Commodity
- gold
- Region
- usa_ak
- Reported Region
- usa_ak
- Ticker
- TECT.V
Geometry
- Grade
- 0.5
- Grade Unit
- g/t
- Intercept
- 19.81 m
- From
- 1.52 m
- To
- 21.34 m
- Hole Depth
- 169.16 m
- Intercept Depth
- 1.52 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- CMR26-171:1.52-21.34
- Mining Method
- open_pit
Location
- Easting
- 552495
- Northing
- 6917871
- Azimuth
- 110 °
- Dip
- -55 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Global
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Compositing
- Max Dilution
- 3.2 m
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-10-15T00:00:00.000Z
Reasoning: This intercept shows moderate-grade gold over a significant width starting near surface and ends in mineralization, indicating potential for further extension at Adit.
Positive factors
- Moderate grade for gold
- Significant intercept length
- Near-surface mineralization
- Ends in mineralization
Negative factors
- Apparent width only
- Cut-off grade not specified for this interval
Evidence · table
“0.50”
Context: 19.81
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
CMR26-171Flat · goldGrade: 0.57Grade Unit: g/tIntercept: 16.76 mView all detailsHide details
Identity
- Hole ID
- CMR26-171
- Project
- Flat
- Commodity
- gold
- Region
- usa_ak
- Reported Region
- usa_ak
- Ticker
- TECT.V
Geometry
- Grade
- 0.57
- Grade Unit
- g/t
- Intercept
- 16.76 m
- From
- 3.05 m
- To
- 19.81 m
- Hole Depth
- 169.16 m
- Intercept Depth
- 1.52 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- CMR26-171:3.05-19.81
- Mining Method
- open_pit
Location
- Easting
- 552495
- Northing
- 6917871
- Azimuth
- 110 °
- Dip
- -55 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Global
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Compositing
- Max Dilution
- 3.2 m
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-10-15T00:00:00.000Z
Reasoning: This sub-interval shows moderate gold grade over a significant width starting near surface, contributing to the overall Adit mineralization.
Positive factors
- Moderate grade for gold
- Significant intercept length
- Near-surface mineralization
Negative factors
- Apparent width only
- Cut-off grade not specified for this interval
Evidence · table
“0.57”
Context: 16.76
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
CMR26-171Flat · goldGrade: 0.9Grade Unit: g/tIntercept: 7.62 mView all detailsHide details
Identity
- Hole ID
- CMR26-171
- Project
- Flat
- Commodity
- gold
- Region
- usa_ak
- Reported Region
- usa_ak
- Ticker
- TECT.V
Geometry
- Grade
- 0.9
- Grade Unit
- g/t
- Intercept
- 7.62 m
- From
- 3.05 m
- To
- 10.67 m
- Hole Depth
- 169.16 m
- Intercept Depth
- 1.52 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- CMR26-171:3.05-10.67
- Mining Method
- open_pit
Location
- Easting
- 552495
- Northing
- 6917871
- Azimuth
- 110 °
- Dip
- -55 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Global
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Compositing
- Max Dilution
- 3.2 m
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-10-15T00:00:00.000Z
Reasoning: This sub-interval shows moderate gold grade over a good width starting near surface, contributing to the overall Adit mineralization.
Positive factors
- Moderate grade for gold
- Good intercept length
- Near-surface mineralization
Negative factors
- Apparent width only
- Cut-off grade not specified for this interval
Evidence · table
“0.90”
Context: 7.62
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
CMR26-171Flat · goldGrade: 0.33Grade Unit: g/tIntercept: 18.29 mView all detailsHide details
Identity
- Hole ID
- CMR26-171
- Project
- Flat
- Commodity
- gold
- Region
- usa_ak
- Reported Region
- usa_ak
- Ticker
- TECT.V
Geometry
- Grade
- 0.33
- Grade Unit
- g/t
- Intercept
- 18.29 m
- From
- 45.72 m
- To
- 64.01 m
- Hole Depth
- 169.16 m
- Intercept Depth
- 1.52 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- CMR26-171:45.72-64.01
- Mining Method
- open_pit
Location
- Easting
- 552495
- Northing
- 6917871
- Azimuth
- 110 °
- Dip
- -55 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Global
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Compositing
- Max Dilution
- 3.2 m
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-10-15T00:00:00.000Z
Reasoning: This intercept shows moderate gold grade over a significant width, contributing to the overall Adit mineralization.
Positive factors
- Moderate grade for gold
- Significant intercept length
Negative factors
- Apparent width only
- Cut-off grade not specified for this interval
Evidence · table
“0.33”
Context: 18.29
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
CMR26-171Flat · goldGrade: 0.47Grade Unit: g/tIntercept: 12.19 mView all detailsHide details
Identity
- Hole ID
- CMR26-171
- Project
- Flat
- Commodity
- gold
- Region
- usa_ak
- Reported Region
- usa_ak
- Ticker
- TECT.V
Geometry
- Grade
- 0.47
- Grade Unit
- g/t
- Intercept
- 12.19 m
- From
- 50.29 m
- To
- 62.48 m
- Hole Depth
- 169.16 m
- Intercept Depth
- 1.52 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- CMR26-171:50.29-62.48
- Mining Method
- open_pit
Location
- Easting
- 552495
- Northing
- 6917871
- Azimuth
- 110 °
- Dip
- -55 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Global
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Compositing
- Max Dilution
- 3.2 m
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-10-15T00:00:00.000Z
Reasoning: This sub-interval shows moderate gold grade over a good width, contributing to the overall Adit mineralization.
Positive factors
- Moderate grade for gold
- Good intercept length
Negative factors
- Apparent width only
- Cut-off grade not specified for this interval
Evidence · table
“0.47”
Context: 12.19
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
CMR26-171Flat · goldGrade: 1.12Grade Unit: g/tIntercept: 3.05 mView all detailsHide details
Identity
- Hole ID
- CMR26-171
- Project
- Flat
- Commodity
- gold
- Region
- usa_ak
- Reported Region
- usa_ak
- Ticker
- TECT.V
Geometry
- Grade
- 1.12
- Grade Unit
- g/t
- Intercept
- 3.05 m
- From
- 99.06 m
- To
- 102.11 m
- Hole Depth
- 169.16 m
- Intercept Depth
- 1.52 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- CMR26-171:99.06-102.11
- Mining Method
- open_pit
Location
- Easting
- 552495
- Northing
- 6917871
- Azimuth
- 110 °
- Dip
- -55 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Global
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Compositing
- Max Dilution
- 3.2 m
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-10-15T00:00:00.000Z
Reasoning: This intercept shows moderate gold grade over a narrow width, contributing to the overall Adit mineralization.
Positive factors
- Moderate grade for gold
Negative factors
- Narrow intercept length
- Apparent width only
- Cut-off grade not specified for this interval
Evidence · table
“1.12”
Context: 3.05
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
CMR26-171Flat · goldGrade: 0.18Grade Unit: g/tIntercept: 10.67 mView all detailsHide details
Identity
- Hole ID
- CMR26-171
- Project
- Flat
- Commodity
- gold
- Region
- usa_ak
- Reported Region
- usa_ak
- Ticker
- TECT.V
Geometry
- Grade
- 0.18
- Grade Unit
- g/t
- Intercept
- 10.67 m
- From
- 114.3 m
- To
- 124.97 m
- Hole Depth
- 169.16 m
- Intercept Depth
- 1.52 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- CMR26-171:114.3-124.97
- Mining Method
- open_pit
Location
- Easting
- 552495
- Northing
- 6917871
- Azimuth
- 110 °
- Dip
- -55 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Global
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Compositing
- Max Dilution
- 3.2 m
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-10-15T00:00:00.000Z
Reasoning: This intercept shows very low-grade gold over a moderate width, indicating weak mineralization in the Adit zone.
Negative factors
- Low grade for gold
- Apparent width only
- Cut-off grade not specified for this interval
Evidence · table
“0.18”
Context: 10.67
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
CMR26-171Flat · goldGrade: 0.66Grade Unit: g/tIntercept: 35.05 mView all detailsHide details
Identity
- Hole ID
- CMR26-171
- Project
- Flat
- Commodity
- gold
- Region
- usa_ak
- Reported Region
- usa_ak
- Ticker
- TECT.V
Geometry
- Grade
- 0.66
- Grade Unit
- g/t
- Intercept
- 35.05 m
- From
- 134.11 m
- To
- 169.16 m
- Hole Depth
- 169.16 m
- Intercept Depth
- 1.52 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- CMR26-171:134.11-169.16
- Mining Method
- open_pit
Location
- Easting
- 552495
- Northing
- 6917871
- Azimuth
- 110 °
- Dip
- -55 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Global
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Compositing
- Max Dilution
- 3.2 m
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-10-15T00:00:00.000Z
Reasoning: This intercept shows moderate-grade gold over a significant width and ends in mineralization, indicating potential for further extension at Adit.
Positive factors
- Moderate grade for gold
- Significant intercept length
- Ends in mineralization
Negative factors
- Apparent width only
- Cut-off grade not specified for this interval
Evidence · table
“0.66”
Context: 35.05
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
CMR26-171Flat · goldGrade: 1Grade Unit: g/tIntercept: 18.29 mView all detailsHide details
Identity
- Hole ID
- CMR26-171
- Project
- Flat
- Commodity
- gold
- Region
- usa_ak
- Reported Region
- usa_ak
- Ticker
- TECT.V
Geometry
- Grade
- 1
- Grade Unit
- g/t
- Intercept
- 18.29 m
- From
- 143.26 m
- To
- 161.54 m
- Hole Depth
- 169.16 m
- Intercept Depth
- 1.52 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- CMR26-171:143.26-161.54
- Mining Method
- open_pit
Location
- Easting
- 552495
- Northing
- 6917871
- Azimuth
- 110 °
- Dip
- -55 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Global
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Compositing
- Max Dilution
- 3.2 m
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-10-15T00:00:00.000Z
Reasoning: This sub-interval shows moderate gold grade over a significant width, contributing to the overall Adit mineralization.
Positive factors
- Moderate grade for gold
- Significant intercept length
Negative factors
- Apparent width only
- Cut-off grade not specified for this interval
Evidence · table
“1.00”
Context: 18.29
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
CMR26-171Flat · goldGrade: 1.63Grade Unit: g/tIntercept: 9.14 mView all detailsHide details
Identity
- Hole ID
- CMR26-171
- Project
- Flat
- Commodity
- gold
- Region
- usa_ak
- Reported Region
- usa_ak
- Ticker
- TECT.V
Geometry
- Grade
- 1.63
- Grade Unit
- g/t
- Intercept
- 9.14 m
- From
- 146.3 m
- To
- 155.45 m
- Hole Depth
- 169.16 m
- Intercept Depth
- 1.52 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- CMR26-171:146.3-155.45
- Mining Method
- open_pit
Location
- Easting
- 552495
- Northing
- 6917871
- Azimuth
- 110 °
- Dip
- -55 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Global
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Compositing
- Max Dilution
- 3.2 m
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-10-15T00:00:00.000Z
Reasoning: This sub-interval shows moderate gold grade over a good width, contributing to the overall Adit mineralization.
Positive factors
- Moderate grade for gold
- Good intercept length
Negative factors
- Apparent width only
- Cut-off grade not specified for this interval
Evidence · table
“1.63”
Context: 9.14
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
How Atlas produces this analysis
Minestarters Atlas uses automated extraction to summarize mining announcements, identify reported measurements, and classify supporting evidence. Sentiment reflects the extracted narrative and classification rules; it is an interpretation, not a reported measurement. Evidence quotes and context are provided where available. Missing data, low-confidence results, and review flags indicate limitations. Check the original publisher announcement before relying on an interpretation.