Talon Metals Reports New Assays And Step-Out Drilling Results Extending Vault Zone Mineralization
Original announcement by tmx on
- Company
- Talon Metals Corp.
- Ticker
- TLO
- Exchange
- TSX
- Region
- Minnesota
- Primary commodity
- Nickel
- Secondary commodities
- Copper, Cobalt, Palladium, Platinum, Gold, Silver
- Document categories
- Drill results
- Extracted
- 2026-08-22 15:05:55 UTC
Analysis by Minestarters Atlas
Minestarters Atlas analysis
Summary
Talon Metals announced new high-grade nickel, copper, cobalt, and PGM assay results from step-out drilling at its Tamarack Nickel-Copper-Cobalt Project in Minnesota. Drill hole 25TK0563C intercepted 15.23 meters grading 7.82% Ni and 7.70% Cu, including a higher-grade sub-interval. These results confirm the continuity and expand the Vault Zone mineralization, with further drilling planned to test extensions.
Reasoning: Talon Metals reported exceptional high-grade nickel, copper, and PGM intercepts from new step-out drilling in the Vault Zone, confirming continuity and extending mineralization. The results from hole 25TK0563C are particularly strong, and the successful step-outs indicate significant expansion potential. While true widths are not provided, the overall results are highly positive for the project.
Positive factors
- High-grade intercepts
- Successful step-out drilling
- Extension of mineralization
- Good QA/QC disclosure
- Continuity of mineralization confirmed
Negative factors
- Apparent width only
- Cut-off grade undisclosed
Facts used in scoring: 53
Classification and evidence
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: The release includes a detailed section on Quality Assurance, Quality Control, and Qualified Persons, mentioning industry best practices, CRM insertion, and ALS Minerals as the laboratory.
Evidence · text
“QUALITY ASSURANCE, QUALITY CONTROL, AND QUALIFIED PERSONS The Talon sample preparation, security, and Quality Assurance ("QA") / Quality Control ("QC") protocols for the Tamarack Nickel-Copper Project are consistent with industry best practices and Canadian Institute of Mining, Metallurgy and Petroleum Mineral Exploration Best Practice Guidelines (November 2018).”
Extracted facts
Stored fact records: 53. Some facts used in scoring do not have a stored record.
Drill Results (53)
25TK0563CTamarack Nickel-Copper-Cobalt Project · nickelGrade: 7.82Grade Unit: %Intercept: 15.23 mView all detailsHide details
Identity
- Hole ID
- 25TK0563C
- Project
- Tamarack Nickel-Copper-Cobalt Project
- Commodity
- nickel
- Region
- minnesota
- Reported Region
- Minnesota
- Ticker
- TLO
Geometry
- Grade
- 7.82
- Grade Unit
- %
- Intercept
- 15.23 m
- From
- 773.86 m
- To
- 789.09 m
- Hole Depth
- 879.7 m
Classification
- Deposit Type
- other
- Program
- exploration
- Sample Type
- drill
- Group ID
- 25TK0563C:773.86-789.09
- Mining Method
- underground
Location
- Easting
- 491049.3
- Northing
- 5168348.9
- CRS
- UTM Zone 15N, NAD83
- Elevation
- 388 m
- Azimuth
- 170.4 °
- Dip
- -85.4 °
- Loc. Confidence
- high
QA/QC
- Laboratory
- ALS Minerals
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicate_samples
Metal Equivalent
- Metal Eq. Grade
- 14.11
- Metal Eq. Unit
- % NiEq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-03-11T00:00:00.000Z
Reasoning: The NiEq grade of 14.11% over 15.23m is exceptional, highlighting the combined value of the polymetallic mineralization.
Positive factors
- Bonanza Intercept
- Exceptional metal equivalent grade
- Significant intercept length
Negative factors
- Apparent width only
- Cut-off grade undisclosed
Evidence · table
“14.11”
Context: 15.23
Rejected tags
Rejected tags — excluded from scoring because their label or evidence could not be verified.
Bonanza InterceptRejected · positive
Exceptionally high-grade zone, well above the deposit-type norm.
Reason: The NiEq grade of 14.11% over 15.23m is exceptionally high.
Evidence · table
“14.11”
Context: 15.23
Apparent Width OnlyRejected · negative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Reason: The document explicitly states 'Length refers to drill hole length and not True Width. True Width is unknown at the time of publication.'
Evidence · text
“Length refers to drill hole length and not True Width. True Width is unknown at the time of publication.”
Cut-off UndisclosedRejected · negative
High-grade interval reported without stating the cut-off grade used for compositing.
Reason: The cut-off grade used for compositing this interval is not disclosed in the document.
Evidence · text
“The document does not state the cut-off grade for this interval.”
25TK0563CTamarack Nickel-Copper-Cobalt Project · copperGrade: 7.7Grade Unit: %Intercept: 15.23 mView all detailsHide details
Identity
- Hole ID
- 25TK0563C
- Project
- Tamarack Nickel-Copper-Cobalt Project
- Commodity
- copper
- Region
- minnesota
- Reported Region
- Minnesota
- Ticker
- TLO
Geometry
- Grade
- 7.7
- Grade Unit
- %
- Intercept
- 15.23 m
- From
- 773.86 m
- To
- 789.09 m
- Hole Depth
- 879.7 m
Classification
- Deposit Type
- other
- Program
- exploration
- Sample Type
- drill
- Group ID
- 25TK0563C:773.86-789.09
- Mining Method
- underground
Location
- Easting
- 491049.3
- Northing
- 5168348.9
- CRS
- UTM Zone 15N, NAD83
- Elevation
- 388 m
- Azimuth
- 170.4 °
- Dip
- -85.4 °
- Loc. Confidence
- high
QA/QC
- Laboratory
- ALS Minerals
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicate_samples
Metal Equivalent
- Metal Eq. Grade
- 27.33
- Metal Eq. Unit
- % CuEq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-03-11T00:00:00.000Z
Reasoning: The CuEq grade of 27.33% over 15.23m is exceptional, highlighting the combined value of the polymetallic mineralization.
Positive factors
- Bonanza Intercept
- Exceptional metal equivalent grade
- Significant intercept length
Negative factors
- Apparent width only
- Cut-off grade undisclosed
Evidence · table
“27.33”
Context: 15.23
Rejected tags
Rejected tags — excluded from scoring because their label or evidence could not be verified.
Bonanza InterceptRejected · positive
Exceptionally high-grade zone, well above the deposit-type norm.
Reason: The CuEq grade of 27.33% over 15.23m is exceptionally high.
Evidence · table
“27.33”
Context: 15.23
Apparent Width OnlyRejected · negative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Reason: The document explicitly states 'Length refers to drill hole length and not True Width. True Width is unknown at the time of publication.'
Evidence · text
“Length refers to drill hole length and not True Width. True Width is unknown at the time of publication.”
Cut-off UndisclosedRejected · negative
High-grade interval reported without stating the cut-off grade used for compositing.
Reason: The cut-off grade used for compositing this interval is not disclosed in the document.
Evidence · text
“The document does not state the cut-off grade for this interval.”
25TK0563CTamarack Nickel-Copper-Cobalt Project · cobaltGrade: 0.06Grade Unit: %Intercept: 15.23 mView all detailsHide details
Identity
- Hole ID
- 25TK0563C
- Project
- Tamarack Nickel-Copper-Cobalt Project
- Commodity
- cobalt
- Region
- minnesota
- Reported Region
- Minnesota
- Ticker
- TLO
Geometry
- Grade
- 0.06
- Grade Unit
- %
- Intercept
- 15.23 m
- From
- 773.86 m
- To
- 789.09 m
- Hole Depth
- 879.7 m
Classification
- Deposit Type
- other
- Program
- exploration
- Sample Type
- drill
- Group ID
- 25TK0563C:773.86-789.09
- Mining Method
- underground
Location
- Easting
- 491049.3
- Northing
- 5168348.9
- CRS
- UTM Zone 15N, NAD83
- Elevation
- 388 m
- Azimuth
- 170.4 °
- Dip
- -85.4 °
- Loc. Confidence
- high
QA/QC
- Laboratory
- ALS Minerals
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicate_samples
Metal Equivalent
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-03-11T00:00:00.000Z
Reasoning: The cobalt grade of 0.06% over 15.23m is considered weak, but it is a byproduct credit in a high-grade nickel-copper intercept.
Negative factors
- Weak grade
- Apparent width only
- Cut-off grade undisclosed
Evidence · table
“0.06”
Context: 15.23
Rejected tags
Rejected tags — excluded from scoring because their label or evidence could not be verified.
Apparent Width OnlyRejected · negative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Reason: The document explicitly states 'Length refers to drill hole length and not True Width. True Width is unknown at the time of publication.'
Evidence · text
“Length refers to drill hole length and not True Width. True Width is unknown at the time of publication.”
Cut-off UndisclosedRejected · negative
High-grade interval reported without stating the cut-off grade used for compositing.
Reason: The cut-off grade used for compositing this interval is not disclosed in the document.
Evidence · text
“The document does not state the cut-off grade for this interval.”
25TK0563CTamarack Nickel-Copper-Cobalt Project · palladiumGrade: 3.05Grade Unit: g/tIntercept: 15.23 mView all detailsHide details
Identity
- Hole ID
- 25TK0563C
- Project
- Tamarack Nickel-Copper-Cobalt Project
- Commodity
- palladium
- Region
- minnesota
- Reported Region
- Minnesota
- Ticker
- TLO
Geometry
- Grade
- 3.05
- Grade Unit
- g/t
- Intercept
- 15.23 m
- From
- 773.86 m
- To
- 789.09 m
- Hole Depth
- 879.7 m
Classification
- Deposit Type
- other
- Program
- exploration
- Sample Type
- drill
- Group ID
- 25TK0563C:773.86-789.09
- Mining Method
- underground
Location
- Easting
- 491049.3
- Northing
- 5168348.9
- CRS
- UTM Zone 15N, NAD83
- Elevation
- 388 m
- Azimuth
- 170.4 °
- Dip
- -85.4 °
- Loc. Confidence
- high
QA/QC
- Laboratory
- ALS Minerals
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicate_samples
Metal Equivalent
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-03-11T00:00:00.000Z
Reasoning: The palladium grade of 3.05 g/t over 15.23m is strong, adding significant value as a byproduct to the high-grade nickel-copper intercept.
Positive factors
- Strong grade
- Significant intercept length
Negative factors
- Apparent width only
- Cut-off grade undisclosed
Evidence · table
“3.05”
Context: 15.23
Rejected tags
Rejected tags — excluded from scoring because their label or evidence could not be verified.
Apparent Width OnlyRejected · negative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Reason: The document explicitly states 'Length refers to drill hole length and not True Width. True Width is unknown at the time of publication.'
Evidence · text
“Length refers to drill hole length and not True Width. True Width is unknown at the time of publication.”
Cut-off UndisclosedRejected · negative
High-grade interval reported without stating the cut-off grade used for compositing.
Reason: The cut-off grade used for compositing this interval is not disclosed in the document.
Evidence · text
“The document does not state the cut-off grade for this interval.”
25TK0563CTamarack Nickel-Copper-Cobalt Project · platinumGrade: 5.72Grade Unit: g/tIntercept: 15.23 mView all detailsHide details
Identity
- Hole ID
- 25TK0563C
- Project
- Tamarack Nickel-Copper-Cobalt Project
- Commodity
- platinum
- Region
- minnesota
- Reported Region
- Minnesota
- Ticker
- TLO
Geometry
- Grade
- 5.72
- Grade Unit
- g/t
- Intercept
- 15.23 m
- From
- 773.86 m
- To
- 789.09 m
- Hole Depth
- 879.7 m
Classification
- Deposit Type
- other
- Program
- exploration
- Sample Type
- drill
- Group ID
- 25TK0563C:773.86-789.09
- Mining Method
- underground
Location
- Easting
- 491049.3
- Northing
- 5168348.9
- CRS
- UTM Zone 15N, NAD83
- Elevation
- 388 m
- Azimuth
- 170.4 °
- Dip
- -85.4 °
- Loc. Confidence
- high
QA/QC
- Laboratory
- ALS Minerals
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicate_samples
Metal Equivalent
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-03-11T00:00:00.000Z
Reasoning: The platinum grade of 5.72 g/t over 15.23m is exceptional, representing a bonanza grade and significant width, adding substantial value as a byproduct.
Positive factors
- Bonanza Intercept
- Exceptional grade
- Significant intercept length
Negative factors
- Apparent width only
- Cut-off grade undisclosed
Evidence · table
“5.72”
Context: 15.23
Rejected tags
Rejected tags — excluded from scoring because their label or evidence could not be verified.
Bonanza InterceptRejected · positive
Exceptionally high-grade zone, well above the deposit-type norm.
Reason: The platinum grade of 5.72 g/t over 15.23m is above the exceptional threshold for platinum.
Evidence · table
“5.72”
Context: 15.23
Apparent Width OnlyRejected · negative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Reason: The document explicitly states 'Length refers to drill hole length and not True Width. True Width is unknown at the time of publication.'
Evidence · text
“Length refers to drill hole length and not True Width. True Width is unknown at the time of publication.”
Cut-off UndisclosedRejected · negative
High-grade interval reported without stating the cut-off grade used for compositing.
Reason: The cut-off grade used for compositing this interval is not disclosed in the document.
Evidence · text
“The document does not state the cut-off grade for this interval.”
25TK0563CTamarack Nickel-Copper-Cobalt Project · goldGrade: 3.09Grade Unit: g/tIntercept: 15.23 mView all detailsHide details
Identity
- Hole ID
- 25TK0563C
- Project
- Tamarack Nickel-Copper-Cobalt Project
- Commodity
- gold
- Region
- minnesota
- Reported Region
- Minnesota
- Ticker
- TLO
Geometry
- Grade
- 3.09
- Grade Unit
- g/t
- Intercept
- 15.23 m
- From
- 773.86 m
- To
- 789.09 m
- Hole Depth
- 879.7 m
Classification
- Deposit Type
- other
- Program
- exploration
- Sample Type
- drill
- Group ID
- 25TK0563C:773.86-789.09
- Mining Method
- underground
Location
- Easting
- 491049.3
- Northing
- 5168348.9
- CRS
- UTM Zone 15N, NAD83
- Elevation
- 388 m
- Azimuth
- 170.4 °
- Dip
- -85.4 °
- Loc. Confidence
- high
QA/QC
- Laboratory
- ALS Minerals
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicate_samples
Metal Equivalent
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-03-11T00:00:00.000Z
Reasoning: The gold grade of 3.09 g/t over 15.23m is considered weak for underground gold, but provides a valuable byproduct credit.
Positive factors
- Moderate intercept length
Negative factors
- Weak grade
- Apparent width only
- Cut-off grade undisclosed
Evidence · table
“3.09”
Context: 15.23
Rejected tags
Rejected tags — excluded from scoring because their label or evidence could not be verified.
Apparent Width OnlyRejected · negative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Reason: The document explicitly states 'Length refers to drill hole length and not True Width. True Width is unknown at the time of publication.'
Evidence · text
“Length refers to drill hole length and not True Width. True Width is unknown at the time of publication.”
Cut-off UndisclosedRejected · negative
High-grade interval reported without stating the cut-off grade used for compositing.
Reason: The cut-off grade used for compositing this interval is not disclosed in the document.
Evidence · text
“The document does not state the cut-off grade for this interval.”
25TK0563CTamarack Nickel-Copper-Cobalt Project · silverGrade: 17.39Grade Unit: g/tIntercept: 15.23 mView all detailsHide details
Identity
- Hole ID
- 25TK0563C
- Project
- Tamarack Nickel-Copper-Cobalt Project
- Commodity
- silver
- Region
- minnesota
- Reported Region
- Minnesota
- Ticker
- TLO
Geometry
- Grade
- 17.39
- Grade Unit
- g/t
- Intercept
- 15.23 m
- From
- 773.86 m
- To
- 789.09 m
- Hole Depth
- 879.7 m
Classification
- Deposit Type
- other
- Program
- exploration
- Sample Type
- drill
- Group ID
- 25TK0563C:773.86-789.09
- Mining Method
- underground
Location
- Easting
- 491049.3
- Northing
- 5168348.9
- CRS
- UTM Zone 15N, NAD83
- Elevation
- 388 m
- Azimuth
- 170.4 °
- Dip
- -85.4 °
- Loc. Confidence
- high
QA/QC
- Laboratory
- ALS Minerals
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicate_samples
Metal Equivalent
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-03-11T00:00:00.000Z
Reasoning: The silver grade of 17.39 g/t over 15.23m is considered weak, but provides a minor byproduct credit.
Negative factors
- Weak grade
- Apparent width only
- Cut-off grade undisclosed
Evidence · table
“17.39”
Context: 15.23
Rejected tags
Rejected tags — excluded from scoring because their label or evidence could not be verified.
Apparent Width OnlyRejected · negative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Reason: The document explicitly states 'Length refers to drill hole length and not True Width. True Width is unknown at the time of publication.'
Evidence · text
“Length refers to drill hole length and not True Width. True Width is unknown at the time of publication.”
Cut-off UndisclosedRejected · negative
High-grade interval reported without stating the cut-off grade used for compositing.
Reason: The cut-off grade used for compositing this interval is not disclosed in the document.
Evidence · text
“The document does not state the cut-off grade for this interval.”
25TK0563CTamarack Nickel-Copper-Cobalt Project · nickelIntercept: 7.23 mView all detailsHide details
Identity
- Hole ID
- 25TK0563C
- Project
- Tamarack Nickel-Copper-Cobalt Project
- Commodity
- nickel
- Region
- minnesota
- Reported Region
- Minnesota
- Ticker
- TLO
Geometry
- Intercept
- 7.23 m
- From
- 776.49 m
- To
- 782.2 m
- Hole Depth
- 879.7 m
Classification
- Deposit Type
- other
- Program
- exploration
- Sample Type
- drill
- Group ID
- 25TK0563C:776.49-782.20
- Mining Method
- underground
Location
- Easting
- 491049.3
- Northing
- 5168348.9
- CRS
- UTM Zone 15N, NAD83
- Elevation
- 388 m
- Azimuth
- 170.4 °
- Dip
- -85.4 °
- Loc. Confidence
- high
QA/QC
- Laboratory
- ALS Minerals
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicate_samples
Metal Equivalent
- Metal Eq. Grade
- 26.41
- Metal Eq. Unit
- % NiEq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-03-11T00:00:00.000Z
Reasoning: The NiEq grade of 26.41% over 7.23m is exceptional, highlighting the combined value of the polymetallic mineralization in this high-grade sub-interval.
Positive factors
- Bonanza Intercept
- Exceptional metal equivalent grade
- High-grade sub-interval
Negative factors
- Apparent width only
- Cut-off grade undisclosed
Evidence · table
“26.41”
Context: 7.23
Rejected tags
Rejected tags — excluded from scoring because their label or evidence could not be verified.
Bonanza InterceptRejected · positive
Exceptionally high-grade zone, well above the deposit-type norm.
Reason: The NiEq grade of 26.41% over 7.23m is exceptionally high.
Evidence · table
“26.41”
Context: 7.23
Apparent Width OnlyRejected · negative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Reason: The document explicitly states 'Length refers to drill hole length and not True Width. True Width is unknown at the time of publication.'
Evidence · text
“Length refers to drill hole length and not True Width. True Width is unknown at the time of publication.”
Cut-off UndisclosedRejected · negative
High-grade interval reported without stating the cut-off grade used for compositing.
Reason: The cut-off grade used for compositing this interval is not disclosed in the document.
Evidence · text
“The document does not state the cut-off grade for this interval.”
25TK0563CTamarack Nickel-Copper-Cobalt Project · copperIntercept: 7.23 mView all detailsHide details
Identity
- Hole ID
- 25TK0563C
- Project
- Tamarack Nickel-Copper-Cobalt Project
- Commodity
- copper
- Region
- minnesota
- Reported Region
- Minnesota
- Ticker
- TLO
Geometry
- Intercept
- 7.23 m
- From
- 776.49 m
- To
- 782.2 m
- Hole Depth
- 879.7 m
Classification
- Deposit Type
- other
- Program
- exploration
- Sample Type
- drill
- Group ID
- 25TK0563C:776.49-782.20
- Mining Method
- underground
Location
- Easting
- 491049.3
- Northing
- 5168348.9
- CRS
- UTM Zone 15N, NAD83
- Elevation
- 388 m
- Azimuth
- 170.4 °
- Dip
- -85.4 °
- Loc. Confidence
- high
QA/QC
- Laboratory
- ALS Minerals
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicate_samples
Metal Equivalent
- Metal Eq. Grade
- 52.82
- Metal Eq. Unit
- % CuEq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-03-11T00:00:00.000Z
Reasoning: The CuEq grade of 52.82% over 7.23m is exceptional, highlighting the combined value of the polymetallic mineralization in this high-grade sub-interval.
Positive factors
- Bonanza Intercept
- Exceptional metal equivalent grade
- High-grade sub-interval
Negative factors
- Apparent width only
- Cut-off grade undisclosed
Evidence · table
“52.82”
Context: 7.23
Rejected tags
Rejected tags — excluded from scoring because their label or evidence could not be verified.
Bonanza InterceptRejected · positive
Exceptionally high-grade zone, well above the deposit-type norm.
Reason: The CuEq grade of 52.82% over 7.23m is exceptionally high.
Evidence · table
“52.82”
Context: 7.23
Apparent Width OnlyRejected · negative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Reason: The document explicitly states 'Length refers to drill hole length and not True Width. True Width is unknown at the time of publication.'
Evidence · text
“Length refers to drill hole length and not True Width. True Width is unknown at the time of publication.”
Cut-off UndisclosedRejected · negative
High-grade interval reported without stating the cut-off grade used for compositing.
Reason: The cut-off grade used for compositing this interval is not disclosed in the document.
Evidence · text
“The document does not state the cut-off grade for this interval.”
25TK0563CTamarack Nickel-Copper-Cobalt Project · cobaltGrade: 0.11Grade Unit: %Intercept: 7.23 mView all detailsHide details
Identity
- Hole ID
- 25TK0563C
- Project
- Tamarack Nickel-Copper-Cobalt Project
- Commodity
- cobalt
- Region
- minnesota
- Reported Region
- Minnesota
- Ticker
- TLO
Geometry
- Grade
- 0.11
- Grade Unit
- %
- Intercept
- 7.23 m
- From
- 776.49 m
- To
- 782.2 m
- Hole Depth
- 879.7 m
Classification
- Deposit Type
- other
- Program
- exploration
- Sample Type
- drill
- Group ID
- 25TK0563C:776.49-782.20
- Mining Method
- underground
Location
- Easting
- 491049.3
- Northing
- 5168348.9
- CRS
- UTM Zone 15N, NAD83
- Elevation
- 388 m
- Azimuth
- 170.4 °
- Dip
- -85.4 °
- Loc. Confidence
- high
QA/QC
- Laboratory
- ALS Minerals
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicate_samples
Metal Equivalent
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-03-11T00:00:00.000Z
Reasoning: The cobalt grade of 0.11% over 7.23m is considered weak, but it is a byproduct credit in a high-grade nickel-copper intercept.
Negative factors
- Weak grade
- Apparent width only
- Cut-off grade undisclosed
Evidence · table
“0.11”
Context: 7.23
Rejected tags
Rejected tags — excluded from scoring because their label or evidence could not be verified.
Apparent Width OnlyRejected · negative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Reason: The document explicitly states 'Length refers to drill hole length and not True Width. True Width is unknown at the time of publication.'
Evidence · text
“Length refers to drill hole length and not True Width. True Width is unknown at the time of publication.”
Cut-off UndisclosedRejected · negative
High-grade interval reported without stating the cut-off grade used for compositing.
Reason: The cut-off grade used for compositing this interval is not disclosed in the document.
Evidence · text
“The document does not state the cut-off grade for this interval.”
25TK0563CTamarack Nickel-Copper-Cobalt Project · palladiumGrade: 5.23Grade Unit: g/tIntercept: 7.23 mView all detailsHide details
Identity
- Hole ID
- 25TK0563C
- Project
- Tamarack Nickel-Copper-Cobalt Project
- Commodity
- palladium
- Region
- minnesota
- Reported Region
- Minnesota
- Ticker
- TLO
Geometry
- Grade
- 5.23
- Grade Unit
- g/t
- Intercept
- 7.23 m
- From
- 776.49 m
- To
- 782.2 m
- Hole Depth
- 879.7 m
Classification
- Deposit Type
- other
- Program
- exploration
- Sample Type
- drill
- Group ID
- 25TK0563C:776.49-782.20
- Mining Method
- underground
Location
- Easting
- 491049.3
- Northing
- 5168348.9
- CRS
- UTM Zone 15N, NAD83
- Elevation
- 388 m
- Azimuth
- 170.4 °
- Dip
- -85.4 °
- Loc. Confidence
- high
QA/QC
- Laboratory
- ALS Minerals
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicate_samples
Metal Equivalent
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-03-11T00:00:00.000Z
Reasoning: The palladium grade of 5.23 g/t over 7.23m is exceptional, representing a bonanza grade and significant width, adding substantial value as a byproduct.
Positive factors
- Bonanza Intercept
- Exceptional grade
- High-grade sub-interval
Negative factors
- Apparent width only
- Cut-off grade undisclosed
Evidence · table
“5.23”
Context: 7.23
Rejected tags
Rejected tags — excluded from scoring because their label or evidence could not be verified.
Bonanza InterceptRejected · positive
Exceptionally high-grade zone, well above the deposit-type norm.
Reason: The palladium grade of 5.23 g/t over 7.23m is above the exceptional threshold for palladium.
Evidence · table
“5.23”
Context: 7.23
Apparent Width OnlyRejected · negative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Reason: The document explicitly states 'Length refers to drill hole length and not True Width. True Width is unknown at the time of publication.'
Evidence · text
“Length refers to drill hole length and not True Width. True Width is unknown at the time of publication.”
Cut-off UndisclosedRejected · negative
High-grade interval reported without stating the cut-off grade used for compositing.
Reason: The cut-off grade used for compositing this interval is not disclosed in the document.
Evidence · text
“The document does not state the cut-off grade for this interval.”
25TK0563CTamarack Nickel-Copper-Cobalt Project · platinumGrade: 9.98Grade Unit: g/tIntercept: 7.23 mView all detailsHide details
Identity
- Hole ID
- 25TK0563C
- Project
- Tamarack Nickel-Copper-Cobalt Project
- Commodity
- platinum
- Region
- minnesota
- Reported Region
- Minnesota
- Ticker
- TLO
Geometry
- Grade
- 9.98
- Grade Unit
- g/t
- Intercept
- 7.23 m
- From
- 776.49 m
- To
- 782.2 m
- Hole Depth
- 879.7 m
Classification
- Deposit Type
- other
- Program
- exploration
- Sample Type
- drill
- Group ID
- 25TK0563C:776.49-782.20
- Mining Method
- underground
Location
- Easting
- 491049.3
- Northing
- 5168348.9
- CRS
- UTM Zone 15N, NAD83
- Elevation
- 388 m
- Azimuth
- 170.4 °
- Dip
- -85.4 °
- Loc. Confidence
- high
QA/QC
- Laboratory
- ALS Minerals
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicate_samples
Metal Equivalent
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-03-11T00:00:00.000Z
Reasoning: The platinum grade of 9.98 g/t over 7.23m is exceptional, representing a bonanza grade and significant width, adding substantial value as a byproduct.
Positive factors
- Bonanza Intercept
- Exceptional grade
- High-grade sub-interval
Negative factors
- Apparent width only
- Cut-off grade undisclosed
Evidence · table
“9.98”
Context: 7.23
Rejected tags
Rejected tags — excluded from scoring because their label or evidence could not be verified.
Bonanza InterceptRejected · positive
Exceptionally high-grade zone, well above the deposit-type norm.
Reason: The platinum grade of 9.98 g/t over 7.23m is above the exceptional threshold for platinum.
Evidence · table
“9.98”
Context: 7.23
Apparent Width OnlyRejected · negative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Reason: The document explicitly states 'Length refers to drill hole length and not True Width. True Width is unknown at the time of publication.'
Evidence · text
“Length refers to drill hole length and not True Width. True Width is unknown at the time of publication.”
Cut-off UndisclosedRejected · negative
High-grade interval reported without stating the cut-off grade used for compositing.
Reason: The cut-off grade used for compositing this interval is not disclosed in the document.
Evidence · text
“The document does not state the cut-off grade for this interval.”
25TK0563CTamarack Nickel-Copper-Cobalt Project · goldGrade: 5.24Grade Unit: g/tIntercept: 7.23 mView all detailsHide details
Identity
- Hole ID
- 25TK0563C
- Project
- Tamarack Nickel-Copper-Cobalt Project
- Commodity
- gold
- Region
- minnesota
- Reported Region
- Minnesota
- Ticker
- TLO
Geometry
- Grade
- 5.24
- Grade Unit
- g/t
- Intercept
- 7.23 m
- From
- 776.49 m
- To
- 782.2 m
- Hole Depth
- 879.7 m
Classification
- Deposit Type
- other
- Program
- exploration
- Sample Type
- drill
- Group ID
- 25TK0563C:776.49-782.20
- Mining Method
- underground
Location
- Easting
- 491049.3
- Northing
- 5168348.9
- CRS
- UTM Zone 15N, NAD83
- Elevation
- 388 m
- Azimuth
- 170.4 °
- Dip
- -85.4 °
- Loc. Confidence
- high
QA/QC
- Laboratory
- ALS Minerals
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicate_samples
Metal Equivalent
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-03-11T00:00:00.000Z
Reasoning: The gold grade of 5.24 g/t over 7.23m is moderate for underground gold, providing a valuable byproduct credit.
Positive factors
- Moderate grade
- Moderate intercept length
Negative factors
- Apparent width only
- Cut-off grade undisclosed
Evidence · table
“5.24”
Context: 7.23
Rejected tags
Rejected tags — excluded from scoring because their label or evidence could not be verified.
Apparent Width OnlyRejected · negative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Reason: The document explicitly states 'Length refers to drill hole length and not True Width. True Width is unknown at the time of publication.'
Evidence · text
“Length refers to drill hole length and not True Width. True Width is unknown at the time of publication.”
Cut-off UndisclosedRejected · negative
High-grade interval reported without stating the cut-off grade used for compositing.
Reason: The cut-off grade used for compositing this interval is not disclosed in the document.
Evidence · text
“The document does not state the cut-off grade for this interval.”
25TK0563CTamarack Nickel-Copper-Cobalt Project · silverGrade: 28.91Grade Unit: g/tIntercept: 7.23 mView all detailsHide details
Identity
- Hole ID
- 25TK0563C
- Project
- Tamarack Nickel-Copper-Cobalt Project
- Commodity
- silver
- Region
- minnesota
- Reported Region
- Minnesota
- Ticker
- TLO
Geometry
- Grade
- 28.91
- Grade Unit
- g/t
- Intercept
- 7.23 m
- From
- 776.49 m
- To
- 782.2 m
- Hole Depth
- 879.7 m
Classification
- Deposit Type
- other
- Program
- exploration
- Sample Type
- drill
- Group ID
- 25TK0563C:776.49-782.20
- Mining Method
- underground
Location
- Easting
- 491049.3
- Northing
- 5168348.9
- CRS
- UTM Zone 15N, NAD83
- Elevation
- 388 m
- Azimuth
- 170.4 °
- Dip
- -85.4 °
- Loc. Confidence
- high
QA/QC
- Laboratory
- ALS Minerals
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicate_samples
Metal Equivalent
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-03-11T00:00:00.000Z
Reasoning: The silver grade of 28.91 g/t over 7.23m is considered weak, but provides a minor byproduct credit.
Negative factors
- Weak grade
- Apparent width only
- Cut-off grade undisclosed
Evidence · table
“28.91”
Context: 7.23
Rejected tags
Rejected tags — excluded from scoring because their label or evidence could not be verified.
Apparent Width OnlyRejected · negative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Reason: The document explicitly states 'Length refers to drill hole length and not True Width. True Width is unknown at the time of publication.'
Evidence · text
“Length refers to drill hole length and not True Width. True Width is unknown at the time of publication.”
Cut-off UndisclosedRejected · negative
High-grade interval reported without stating the cut-off grade used for compositing.
Reason: The cut-off grade used for compositing this interval is not disclosed in the document.
Evidence · text
“The document does not state the cut-off grade for this interval.”
25TK0552Tamarack Nickel-Copper-Cobalt Project · nickelIntercept: 149.01 mView all detailsHide details
Identity
- Hole ID
- 25TK0552
- Project
- Tamarack Nickel-Copper-Cobalt Project
- Commodity
- nickel
- Region
- minnesota
- Reported Region
- Minnesota
- Ticker
- TLO
Geometry
- Intercept
- 149.01 m
- From
- 420.5 m
- To
- 569.51 m
- Hole Depth
- 850 m
Classification
- Deposit Type
- other
- Program
- exploration
- Sample Type
- drill
- Group ID
- 25TK0552:420.50-569.51
- Mining Method
- underground
Location
- Easting
- 491049.3
- Northing
- 5168348.8
- CRS
- UTM Zone 15N, NAD83
- Elevation
- 388 m
- Azimuth
- 212.8 °
- Dip
- -86.1 °
- Loc. Confidence
- high
QA/QC
- Laboratory
- ALS Minerals
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicate_samples
Metal Equivalent
- Metal Eq. Grade
- 1.5
- Metal Eq. Unit
- % NiEq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-03-11T00:00:00.000Z
Reasoning: The NiEq grade of 1.50% over 149.01m is a moderate metal equivalent grade over an exceptional width, indicating significant mineralization.
Positive factors
- Moderate metal equivalent grade
- Continuous intercept
- Exceptional grade-thickness
Negative factors
- Apparent width only
- Cut-off grade undisclosed
Evidence · table
“1.50”
Context: 149.01
Rejected tags
Rejected tags — excluded from scoring because their label or evidence could not be verified.
Apparent Width OnlyRejected · negative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Reason: The document explicitly states 'Length refers to drill hole length and not True Width. True Width is unknown at the time of publication.'
Evidence · text
“Length refers to drill hole length and not True Width. True Width is unknown at the time of publication.”
Cut-off UndisclosedRejected · negative
High-grade interval reported without stating the cut-off grade used for compositing.
Reason: The cut-off grade used for compositing this interval is not disclosed in the document.
Evidence · text
“The document does not state the cut-off grade for this interval.”
Infill DrillingRejected · neutral
Confirmatory drilling to raise resource confidence, not new discovery.
Reason: The drilling in the 138 Zone is described as 'infill the current 138 Zone, which sits above the Vault Zone'.
Evidence · text
“Surface drilling targeting the Vault Zone is continuing to infill the current 138 Zone”
25TK0552Tamarack Nickel-Copper-Cobalt Project · copperIntercept: 149.01 mView all detailsHide details
Identity
- Hole ID
- 25TK0552
- Project
- Tamarack Nickel-Copper-Cobalt Project
- Commodity
- copper
- Region
- minnesota
- Reported Region
- Minnesota
- Ticker
- TLO
Geometry
- Intercept
- 149.01 m
- From
- 420.5 m
- To
- 569.51 m
- Hole Depth
- 850 m
Classification
- Deposit Type
- other
- Program
- exploration
- Sample Type
- drill
- Group ID
- 25TK0552:420.50-569.51
- Mining Method
- underground
Location
- Easting
- 491049.3
- Northing
- 5168348.8
- CRS
- UTM Zone 15N, NAD83
- Elevation
- 388 m
- Azimuth
- 212.8 °
- Dip
- -86.1 °
- Loc. Confidence
- high
QA/QC
- Laboratory
- ALS Minerals
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicate_samples
Metal Equivalent
- Metal Eq. Grade
- 2.81
- Metal Eq. Unit
- % CuEq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-03-11T00:00:00.000Z
Reasoning: The CuEq grade of 2.81% over 149.01m is a moderate metal equivalent grade over an exceptional width, indicating significant mineralization.
Positive factors
- Moderate metal equivalent grade
- Continuous intercept
Negative factors
- Apparent width only
- Cut-off grade undisclosed
Evidence · table
“2.81”
Context: 149.01
Rejected tags
Rejected tags — excluded from scoring because their label or evidence could not be verified.
Apparent Width OnlyRejected · negative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Reason: The document explicitly states 'Length refers to drill hole length and not True Width. True Width is unknown at the time of publication.'
Evidence · text
“Length refers to drill hole length and not True Width. True Width is unknown at the time of publication.”
Cut-off UndisclosedRejected · negative
High-grade interval reported without stating the cut-off grade used for compositing.
Reason: The cut-off grade used for compositing this interval is not disclosed in the document.
Evidence · text
“The document does not state the cut-off grade for this interval.”
Infill DrillingRejected · neutral
Confirmatory drilling to raise resource confidence, not new discovery.
Reason: The drilling in the 138 Zone is described as 'infill the current 138 Zone, which sits above the Vault Zone'.
Evidence · text
“Surface drilling targeting the Vault Zone is continuing to infill the current 138 Zone”
25TK0552Tamarack Nickel-Copper-Cobalt Project · cobaltGrade: 0.02Grade Unit: %Intercept: 149.01 mView all detailsHide details
Identity
- Hole ID
- 25TK0552
- Project
- Tamarack Nickel-Copper-Cobalt Project
- Commodity
- cobalt
- Region
- minnesota
- Reported Region
- Minnesota
- Ticker
- TLO
Geometry
- Grade
- 0.02
- Grade Unit
- %
- Intercept
- 149.01 m
- From
- 420.5 m
- To
- 569.51 m
- Hole Depth
- 850 m
Classification
- Deposit Type
- other
- Program
- exploration
- Sample Type
- drill
- Group ID
- 25TK0552:420.50-569.51
- Mining Method
- underground
Location
- Easting
- 491049.3
- Northing
- 5168348.8
- CRS
- UTM Zone 15N, NAD83
- Elevation
- 388 m
- Azimuth
- 212.8 °
- Dip
- -86.1 °
- Loc. Confidence
- high
QA/QC
- Laboratory
- ALS Minerals
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicate_samples
Metal Equivalent
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-03-11T00:00:00.000Z
Reasoning: The cobalt grade of 0.02% over 149.01m is considered weak, but it is a byproduct credit in a long intercept.
Negative factors
- Weak grade
- Apparent width only
- Cut-off grade undisclosed
Evidence · table
“0.02”
Context: 149.01
Rejected tags
Rejected tags — excluded from scoring because their label or evidence could not be verified.
Apparent Width OnlyRejected · negative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Reason: The document explicitly states 'Length refers to drill hole length and not True Width. True Width is unknown at the time of publication.'
Evidence · text
“Length refers to drill hole length and not True Width. True Width is unknown at the time of publication.”
Cut-off UndisclosedRejected · negative
High-grade interval reported without stating the cut-off grade used for compositing.
Reason: The cut-off grade used for compositing this interval is not disclosed in the document.
Evidence · text
“The document does not state the cut-off grade for this interval.”
Infill DrillingRejected · neutral
Confirmatory drilling to raise resource confidence, not new discovery.
Reason: The drilling in the 138 Zone is described as 'infill the current 138 Zone, which sits above the Vault Zone'.
Evidence · text
“Surface drilling targeting the Vault Zone is continuing to infill the current 138 Zone”
25TK0552Tamarack Nickel-Copper-Cobalt Project · palladiumGrade: 0.16Grade Unit: g/tIntercept: 149.01 mView all detailsHide details
Identity
- Hole ID
- 25TK0552
- Project
- Tamarack Nickel-Copper-Cobalt Project
- Commodity
- palladium
- Region
- minnesota
- Reported Region
- Minnesota
- Ticker
- TLO
Geometry
- Grade
- 0.16
- Grade Unit
- g/t
- Intercept
- 149.01 m
- From
- 420.5 m
- To
- 569.51 m
- Hole Depth
- 850 m
Classification
- Deposit Type
- other
- Program
- exploration
- Sample Type
- drill
- Group ID
- 25TK0552:420.50-569.51
- Mining Method
- underground
Location
- Easting
- 491049.3
- Northing
- 5168348.8
- CRS
- UTM Zone 15N, NAD83
- Elevation
- 388 m
- Azimuth
- 212.8 °
- Dip
- -86.1 °
- Loc. Confidence
- high
QA/QC
- Laboratory
- ALS Minerals
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicate_samples
Metal Equivalent
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-03-11T00:00:00.000Z
Reasoning: The palladium grade of 0.16 g/t over 149.01m is considered weak, but it is a byproduct credit in a long intercept.
Negative factors
- Weak grade
- Apparent width only
- Cut-off grade undisclosed
Evidence · table
“0.16”
Context: 149.01
Rejected tags
Rejected tags — excluded from scoring because their label or evidence could not be verified.
Apparent Width OnlyRejected · negative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Reason: The document explicitly states 'Length refers to drill hole length and not True Width. True Width is unknown at the time of publication.'
Evidence · text
“Length refers to drill hole length and not True Width. True Width is unknown at the time of publication.”
Cut-off UndisclosedRejected · negative
High-grade interval reported without stating the cut-off grade used for compositing.
Reason: The cut-off grade used for compositing this interval is not disclosed in the document.
Evidence · text
“The document does not state the cut-off grade for this interval.”
Infill DrillingRejected · neutral
Confirmatory drilling to raise resource confidence, not new discovery.
Reason: The drilling in the 138 Zone is described as 'infill the current 138 Zone, which sits above the Vault Zone'.
Evidence · text
“Surface drilling targeting the Vault Zone is continuing to infill the current 138 Zone”
25TK0552Tamarack Nickel-Copper-Cobalt Project · platinumGrade: 0.26Grade Unit: g/tIntercept: 149.01 mView all detailsHide details
Identity
- Hole ID
- 25TK0552
- Project
- Tamarack Nickel-Copper-Cobalt Project
- Commodity
- platinum
- Region
- minnesota
- Reported Region
- Minnesota
- Ticker
- TLO
Geometry
- Grade
- 0.26
- Grade Unit
- g/t
- Intercept
- 149.01 m
- From
- 420.5 m
- To
- 569.51 m
- Hole Depth
- 850 m
Classification
- Deposit Type
- other
- Program
- exploration
- Sample Type
- drill
- Group ID
- 25TK0552:420.50-569.51
- Mining Method
- underground
Location
- Easting
- 491049.3
- Northing
- 5168348.8
- CRS
- UTM Zone 15N, NAD83
- Elevation
- 388 m
- Azimuth
- 212.8 °
- Dip
- -86.1 °
- Loc. Confidence
- high
QA/QC
- Laboratory
- ALS Minerals
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicate_samples
Metal Equivalent
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-03-11T00:00:00.000Z
Reasoning: The platinum grade of 0.26 g/t over 149.01m is considered weak, but it is a byproduct credit in a long intercept.
Negative factors
- Weak grade
- Apparent width only
- Cut-off grade undisclosed
Evidence · table
“0.26”
Context: 149.01
Rejected tags
Rejected tags — excluded from scoring because their label or evidence could not be verified.
Apparent Width OnlyRejected · negative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Reason: The document explicitly states 'Length refers to drill hole length and not True Width. True Width is unknown at the time of publication.'
Evidence · text
“Length refers to drill hole length and not True Width. True Width is unknown at the time of publication.”
Cut-off UndisclosedRejected · negative
High-grade interval reported without stating the cut-off grade used for compositing.
Reason: The cut-off grade used for compositing this interval is not disclosed in the document.
Evidence · text
“The document does not state the cut-off grade for this interval.”
Infill DrillingRejected · neutral
Confirmatory drilling to raise resource confidence, not new discovery.
Reason: The drilling in the 138 Zone is described as 'infill the current 138 Zone, which sits above the Vault Zone'.
Evidence · text
“Surface drilling targeting the Vault Zone is continuing to infill the current 138 Zone”
25TK0552Tamarack Nickel-Copper-Cobalt Project · goldGrade: 0.22Grade Unit: g/tIntercept: 149.01 mView all detailsHide details
Identity
- Hole ID
- 25TK0552
- Project
- Tamarack Nickel-Copper-Cobalt Project
- Commodity
- gold
- Region
- minnesota
- Reported Region
- Minnesota
- Ticker
- TLO
Geometry
- Grade
- 0.22
- Grade Unit
- g/t
- Intercept
- 149.01 m
- From
- 420.5 m
- To
- 569.51 m
- Hole Depth
- 850 m
Classification
- Deposit Type
- other
- Program
- exploration
- Sample Type
- drill
- Group ID
- 25TK0552:420.50-569.51
- Mining Method
- underground
Location
- Easting
- 491049.3
- Northing
- 5168348.8
- CRS
- UTM Zone 15N, NAD83
- Elevation
- 388 m
- Azimuth
- 212.8 °
- Dip
- -86.1 °
- Loc. Confidence
- high
QA/QC
- Laboratory
- ALS Minerals
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicate_samples
Metal Equivalent
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-03-11T00:00:00.000Z
Reasoning: The gold grade of 0.22 g/t over 149.01m is considered weak for underground gold, but the long intercept provides a moderate grade-thickness product.
Positive factors
- Moderate grade-thickness
Negative factors
- Weak grade
- Apparent width only
- Cut-off grade undisclosed
Evidence · table
“0.22”
Context: 149.01
Rejected tags
Rejected tags — excluded from scoring because their label or evidence could not be verified.
Apparent Width OnlyRejected · negative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Reason: The document explicitly states 'Length refers to drill hole length and not True Width. True Width is unknown at the time of publication.'
Evidence · text
“Length refers to drill hole length and not True Width. True Width is unknown at the time of publication.”
Cut-off UndisclosedRejected · negative
High-grade interval reported without stating the cut-off grade used for compositing.
Reason: The cut-off grade used for compositing this interval is not disclosed in the document.
Evidence · text
“The document does not state the cut-off grade for this interval.”
Infill DrillingRejected · neutral
Confirmatory drilling to raise resource confidence, not new discovery.
Reason: The drilling in the 138 Zone is described as 'infill the current 138 Zone, which sits above the Vault Zone'.
Evidence · text
“Surface drilling targeting the Vault Zone is continuing to infill the current 138 Zone”
25TK0562Tamarack Nickel-Copper-Cobalt Project · nickelIntercept: 10.04 mView all detailsHide details
Identity
- Hole ID
- 25TK0562
- Project
- Tamarack Nickel-Copper-Cobalt Project
- Commodity
- nickel
- Region
- minnesota
- Reported Region
- Minnesota
- Ticker
- TLO
Geometry
- Intercept
- 10.04 m
- From
- 420.5 m
- To
- 430.54 m
- Hole Depth
- 919.6 m
Classification
- Deposit Type
- other
- Program
- exploration
- Sample Type
- drill
- Group ID
- 25TK0562:420.50-430.54
- Mining Method
- underground
Location
- Easting
- 490998.6
- Northing
- 5168292
- CRS
- UTM Zone 15N, NAD83
- Elevation
- 388 m
- Azimuth
- 109.4 °
- Dip
- -85.2 °
- Loc. Confidence
- high
QA/QC
- Laboratory
- ALS Minerals
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicate_samples
Metal Equivalent
- Metal Eq. Grade
- 0.99
- Metal Eq. Unit
- % NiEq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-03-11T00:00:00.000Z
Reasoning: The NiEq grade of 0.99% over 10.04m is considered weak, but contributes to the overall mineralization.
Negative factors
- Weak metal equivalent grade
- Apparent width only
- Cut-off grade undisclosed
Evidence · table
“0.99”
Context: 10.04
Rejected tags
Rejected tags — excluded from scoring because their label or evidence could not be verified.
Apparent Width OnlyRejected · negative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Reason: The document explicitly states 'Length refers to drill hole length and not True Width. True Width is unknown at the time of publication.'
Evidence · text
“Length refers to drill hole length and not True Width. True Width is unknown at the time of publication.”
Cut-off UndisclosedRejected · negative
High-grade interval reported without stating the cut-off grade used for compositing.
Reason: The cut-off grade used for compositing this interval is not disclosed in the document.
Evidence · text
“The document does not state the cut-off grade for this interval.”
Infill DrillingRejected · neutral
Confirmatory drilling to raise resource confidence, not new discovery.
Reason: The drilling in the 138 Zone is described as 'infill the current 138 Zone, which sits above the Vault Zone'.
Evidence · text
“Surface drilling targeting the Vault Zone is continuing to infill the current 138 Zone”
25TK0562Tamarack Nickel-Copper-Cobalt Project · copperIntercept: 10.04 mView all detailsHide details
Identity
- Hole ID
- 25TK0562
- Project
- Tamarack Nickel-Copper-Cobalt Project
- Commodity
- copper
- Region
- minnesota
- Reported Region
- Minnesota
- Ticker
- TLO
Geometry
- Intercept
- 10.04 m
- From
- 420.5 m
- To
- 430.54 m
- Hole Depth
- 919.6 m
Classification
- Deposit Type
- other
- Program
- exploration
- Sample Type
- drill
- Group ID
- 25TK0562:420.50-430.54
- Mining Method
- underground
Location
- Easting
- 490998.6
- Northing
- 5168292
- CRS
- UTM Zone 15N, NAD83
- Elevation
- 388 m
- Azimuth
- 109.4 °
- Dip
- -85.2 °
- Loc. Confidence
- high
QA/QC
- Laboratory
- ALS Minerals
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicate_samples
Metal Equivalent
- Metal Eq. Grade
- 1.75
- Metal Eq. Unit
- % CuEq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-03-11T00:00:00.000Z
Reasoning: The CuEq grade of 1.75% over 10.04m is considered weak, but contributes to the overall mineralization.
Negative factors
- Weak metal equivalent grade
- Apparent width only
- Cut-off grade undisclosed
Evidence · table
“1.75”
Context: 10.04
Rejected tags
Rejected tags — excluded from scoring because their label or evidence could not be verified.
Apparent Width OnlyRejected · negative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Reason: The document explicitly states 'Length refers to drill hole length and not True Width. True Width is unknown at the time of publication.'
Evidence · text
“Length refers to drill hole length and not True Width. True Width is unknown at the time of publication.”
Cut-off UndisclosedRejected · negative
High-grade interval reported without stating the cut-off grade used for compositing.
Reason: The cut-off grade used for compositing this interval is not disclosed in the document.
Evidence · text
“The document does not state the cut-off grade for this interval.”
Infill DrillingRejected · neutral
Confirmatory drilling to raise resource confidence, not new discovery.
Reason: The drilling in the 138 Zone is described as 'infill the current 138 Zone, which sits above the Vault Zone'.
Evidence · text
“Surface drilling targeting the Vault Zone is continuing to infill the current 138 Zone”
25TK0562Tamarack Nickel-Copper-Cobalt Project · cobaltGrade: 0.02Grade Unit: %Intercept: 10.04 mView all detailsHide details
Identity
- Hole ID
- 25TK0562
- Project
- Tamarack Nickel-Copper-Cobalt Project
- Commodity
- cobalt
- Region
- minnesota
- Reported Region
- Minnesota
- Ticker
- TLO
Geometry
- Grade
- 0.02
- Grade Unit
- %
- Intercept
- 10.04 m
- From
- 420.5 m
- To
- 430.54 m
- Hole Depth
- 919.6 m
Classification
- Deposit Type
- other
- Program
- exploration
- Sample Type
- drill
- Group ID
- 25TK0562:420.50-430.54
- Mining Method
- underground
Location
- Easting
- 490998.6
- Northing
- 5168292
- CRS
- UTM Zone 15N, NAD83
- Elevation
- 388 m
- Azimuth
- 109.4 °
- Dip
- -85.2 °
- Loc. Confidence
- high
QA/QC
- Laboratory
- ALS Minerals
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicate_samples
Metal Equivalent
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-03-11T00:00:00.000Z
Reasoning: The cobalt grade of 0.02% over 10.04m is considered weak, but it is a byproduct credit.
Negative factors
- Weak grade
- Apparent width only
- Cut-off grade undisclosed
Evidence · table
“0.02”
Context: 10.04
Rejected tags
Rejected tags — excluded from scoring because their label or evidence could not be verified.
Apparent Width OnlyRejected · negative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Reason: The document explicitly states 'Length refers to drill hole length and not True Width. True Width is unknown at the time of publication.'
Evidence · text
“Length refers to drill hole length and not True Width. True Width is unknown at the time of publication.”
Cut-off UndisclosedRejected · negative
High-grade interval reported without stating the cut-off grade used for compositing.
Reason: The cut-off grade used for compositing this interval is not disclosed in the document.
Evidence · text
“The document does not state the cut-off grade for this interval.”
Infill DrillingRejected · neutral
Confirmatory drilling to raise resource confidence, not new discovery.
Reason: The drilling in the 138 Zone is described as 'infill the current 138 Zone, which sits above the Vault Zone'.
Evidence · text
“Surface drilling targeting the Vault Zone is continuing to infill the current 138 Zone”
25TK0562Tamarack Nickel-Copper-Cobalt Project · palladiumGrade: 0.06Grade Unit: g/tIntercept: 10.04 mView all detailsHide details
Identity
- Hole ID
- 25TK0562
- Project
- Tamarack Nickel-Copper-Cobalt Project
- Commodity
- palladium
- Region
- minnesota
- Reported Region
- Minnesota
- Ticker
- TLO
Geometry
- Grade
- 0.06
- Grade Unit
- g/t
- Intercept
- 10.04 m
- From
- 420.5 m
- To
- 430.54 m
- Hole Depth
- 919.6 m
Classification
- Deposit Type
- other
- Program
- exploration
- Sample Type
- drill
- Group ID
- 25TK0562:420.50-430.54
- Mining Method
- underground
Location
- Easting
- 490998.6
- Northing
- 5168292
- CRS
- UTM Zone 15N, NAD83
- Elevation
- 388 m
- Azimuth
- 109.4 °
- Dip
- -85.2 °
- Loc. Confidence
- high
QA/QC
- Laboratory
- ALS Minerals
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicate_samples
Metal Equivalent
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-03-11T00:00:00.000Z
Reasoning: The palladium grade of 0.06 g/t over 10.04m is considered weak, but it is a byproduct credit.
Negative factors
- Weak grade
- Apparent width only
- Cut-off grade undisclosed
Evidence · table
“0.06”
Context: 10.04
Rejected tags
Rejected tags — excluded from scoring because their label or evidence could not be verified.
Apparent Width OnlyRejected · negative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Reason: The document explicitly states 'Length refers to drill hole length and not True Width. True Width is unknown at the time of publication.'
Evidence · text
“Length refers to drill hole length and not True Width. True Width is unknown at the time of publication.”
Cut-off UndisclosedRejected · negative
High-grade interval reported without stating the cut-off grade used for compositing.
Reason: The cut-off grade used for compositing this interval is not disclosed in the document.
Evidence · text
“The document does not state the cut-off grade for this interval.”
Infill DrillingRejected · neutral
Confirmatory drilling to raise resource confidence, not new discovery.
Reason: The drilling in the 138 Zone is described as 'infill the current 138 Zone, which sits above the Vault Zone'.
Evidence · text
“Surface drilling targeting the Vault Zone is continuing to infill the current 138 Zone”
25TK0562Tamarack Nickel-Copper-Cobalt Project · platinumGrade: 0.09Grade Unit: g/tIntercept: 10.04 mView all detailsHide details
Identity
- Hole ID
- 25TK0562
- Project
- Tamarack Nickel-Copper-Cobalt Project
- Commodity
- platinum
- Region
- minnesota
- Reported Region
- Minnesota
- Ticker
- TLO
Geometry
- Grade
- 0.09
- Grade Unit
- g/t
- Intercept
- 10.04 m
- From
- 420.5 m
- To
- 430.54 m
- Hole Depth
- 919.6 m
Classification
- Deposit Type
- other
- Program
- exploration
- Sample Type
- drill
- Group ID
- 25TK0562:420.50-430.54
- Mining Method
- underground
Location
- Easting
- 490998.6
- Northing
- 5168292
- CRS
- UTM Zone 15N, NAD83
- Elevation
- 388 m
- Azimuth
- 109.4 °
- Dip
- -85.2 °
- Loc. Confidence
- high
QA/QC
- Laboratory
- ALS Minerals
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicate_samples
Metal Equivalent
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-03-11T00:00:00.000Z
Reasoning: The platinum grade of 0.09 g/t over 10.04m is considered weak, but it is a byproduct credit.
Negative factors
- Weak grade
- Apparent width only
- Cut-off grade undisclosed
Evidence · table
“0.09”
Context: 10.04
Rejected tags
Rejected tags — excluded from scoring because their label or evidence could not be verified.
Apparent Width OnlyRejected · negative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Reason: The document explicitly states 'Length refers to drill hole length and not True Width. True Width is unknown at the time of publication.'
Evidence · text
“Length refers to drill hole length and not True Width. True Width is unknown at the time of publication.”
Cut-off UndisclosedRejected · negative
High-grade interval reported without stating the cut-off grade used for compositing.
Reason: The cut-off grade used for compositing this interval is not disclosed in the document.
Evidence · text
“The document does not state the cut-off grade for this interval.”
Infill DrillingRejected · neutral
Confirmatory drilling to raise resource confidence, not new discovery.
Reason: The drilling in the 138 Zone is described as 'infill the current 138 Zone, which sits above the Vault Zone'.
Evidence · text
“Surface drilling targeting the Vault Zone is continuing to infill the current 138 Zone”
25TK0562Tamarack Nickel-Copper-Cobalt Project · goldGrade: 0.1Grade Unit: g/tIntercept: 10.04 mView all detailsHide details
Identity
- Hole ID
- 25TK0562
- Project
- Tamarack Nickel-Copper-Cobalt Project
- Commodity
- gold
- Region
- minnesota
- Reported Region
- Minnesota
- Ticker
- TLO
Geometry
- Grade
- 0.1
- Grade Unit
- g/t
- Intercept
- 10.04 m
- From
- 420.5 m
- To
- 430.54 m
- Hole Depth
- 919.6 m
Classification
- Deposit Type
- other
- Program
- exploration
- Sample Type
- drill
- Group ID
- 25TK0562:420.50-430.54
- Mining Method
- underground
Location
- Easting
- 490998.6
- Northing
- 5168292
- CRS
- UTM Zone 15N, NAD83
- Elevation
- 388 m
- Azimuth
- 109.4 °
- Dip
- -85.2 °
- Loc. Confidence
- high
QA/QC
- Laboratory
- ALS Minerals
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicate_samples
Metal Equivalent
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-03-11T00:00:00.000Z
Reasoning: The gold grade of 0.10 g/t over 10.04m is considered weak, but it is a byproduct credit.
Negative factors
- Weak grade
- Apparent width only
- Cut-off grade undisclosed
Evidence · table
“0.10”
Context: 10.04
Rejected tags
Rejected tags — excluded from scoring because their label or evidence could not be verified.
Apparent Width OnlyRejected · negative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Reason: The document explicitly states 'Length refers to drill hole length and not True Width. True Width is unknown at the time of publication.'
Evidence · text
“Length refers to drill hole length and not True Width. True Width is unknown at the time of publication.”
Cut-off UndisclosedRejected · negative
High-grade interval reported without stating the cut-off grade used for compositing.
Reason: The cut-off grade used for compositing this interval is not disclosed in the document.
Evidence · text
“The document does not state the cut-off grade for this interval.”
Infill DrillingRejected · neutral
Confirmatory drilling to raise resource confidence, not new discovery.
Reason: The drilling in the 138 Zone is described as 'infill the current 138 Zone, which sits above the Vault Zone'.
Evidence · text
“Surface drilling targeting the Vault Zone is continuing to infill the current 138 Zone”
25TK0562Tamarack Nickel-Copper-Cobalt Project · silverGrade: 2.04Grade Unit: g/tIntercept: 10.04 mView all detailsHide details
Identity
- Hole ID
- 25TK0562
- Project
- Tamarack Nickel-Copper-Cobalt Project
- Commodity
- silver
- Region
- minnesota
- Reported Region
- Minnesota
- Ticker
- TLO
Geometry
- Grade
- 2.04
- Grade Unit
- g/t
- Intercept
- 10.04 m
- From
- 420.5 m
- To
- 430.54 m
- Hole Depth
- 919.6 m
Classification
- Deposit Type
- other
- Program
- exploration
- Sample Type
- drill
- Group ID
- 25TK0562:420.50-430.54
- Mining Method
- underground
Location
- Easting
- 490998.6
- Northing
- 5168292
- CRS
- UTM Zone 15N, NAD83
- Elevation
- 388 m
- Azimuth
- 109.4 °
- Dip
- -85.2 °
- Loc. Confidence
- high
QA/QC
- Laboratory
- ALS Minerals
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicate_samples
Metal Equivalent
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-03-11T00:00:00.000Z
Reasoning: The silver grade of 2.04 g/t over 10.04m is considered weak, but it is a byproduct credit.
Negative factors
- Weak grade
- Apparent width only
- Cut-off grade undisclosed
Evidence · table
“2.04”
Context: 10.04
Rejected tags
Rejected tags — excluded from scoring because their label or evidence could not be verified.
Apparent Width OnlyRejected · negative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Reason: The document explicitly states 'Length refers to drill hole length and not True Width. True Width is unknown at the time of publication.'
Evidence · text
“Length refers to drill hole length and not True Width. True Width is unknown at the time of publication.”
Cut-off UndisclosedRejected · negative
High-grade interval reported without stating the cut-off grade used for compositing.
Reason: The cut-off grade used for compositing this interval is not disclosed in the document.
Evidence · text
“The document does not state the cut-off grade for this interval.”
Infill DrillingRejected · neutral
Confirmatory drilling to raise resource confidence, not new discovery.
Reason: The drilling in the 138 Zone is described as 'infill the current 138 Zone, which sits above the Vault Zone'.
Evidence · text
“Surface drilling targeting the Vault Zone is continuing to infill the current 138 Zone”
25TK0565Tamarack Nickel-Copper-Cobalt Project · nickelIntercept: 28.58 mView all detailsHide details
Identity
- Hole ID
- 25TK0565
- Project
- Tamarack Nickel-Copper-Cobalt Project
- Commodity
- nickel
- Region
- minnesota
- Reported Region
- Minnesota
- Ticker
- TLO
Geometry
- Intercept
- 28.58 m
- From
- 420 m
- To
- 448.58 m
- Hole Depth
- 787.3 m
Classification
- Deposit Type
- other
- Program
- exploration
- Sample Type
- drill
- Group ID
- 25TK0565:420.00-448.58
- Mining Method
- underground
Location
- Easting
- 490998.2
- Northing
- 5168295.3
- CRS
- UTM Zone 15N, NAD83
- Elevation
- 388 m
- Azimuth
- 85.7 °
- Dip
- -88.3 °
- Loc. Confidence
- high
QA/QC
- Laboratory
- ALS Minerals
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicate_samples
Metal Equivalent
- Metal Eq. Grade
- 1.23
- Metal Eq. Unit
- % NiEq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-03-11T00:00:00.000Z
Reasoning: The NiEq grade of 1.23% over 28.58m is a moderate metal equivalent grade over a good width, contributing to the overall mineralization.
Positive factors
- Moderate metal equivalent grade
- Moderate intercept length
Negative factors
- Apparent width only
- Cut-off grade undisclosed
Evidence · table
“1.23”
Context: 28.58
Rejected tags
Rejected tags — excluded from scoring because their label or evidence could not be verified.
Apparent Width OnlyRejected · negative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Reason: The document explicitly states 'Length refers to drill hole length and not True Width. True Width is unknown at the time of publication.'
Evidence · text
“Length refers to drill hole length and not True Width. True Width is unknown at the time of publication.”
Cut-off UndisclosedRejected · negative
High-grade interval reported without stating the cut-off grade used for compositing.
Reason: The cut-off grade used for compositing this interval is not disclosed in the document.
Evidence · text
“The document does not state the cut-off grade for this interval.”
Infill DrillingRejected · neutral
Confirmatory drilling to raise resource confidence, not new discovery.
Reason: The drilling in the 138 Zone is described as 'infill the current 138 Zone, which sits above the Vault Zone'.
Evidence · text
“Surface drilling targeting the Vault Zone is continuing to infill the current 138 Zone”
25TK0565Tamarack Nickel-Copper-Cobalt Project · copperIntercept: 28.58 mView all detailsHide details
Identity
- Hole ID
- 25TK0565
- Project
- Tamarack Nickel-Copper-Cobalt Project
- Commodity
- copper
- Region
- minnesota
- Reported Region
- Minnesota
- Ticker
- TLO
Geometry
- Intercept
- 28.58 m
- From
- 420 m
- To
- 448.58 m
- Hole Depth
- 787.3 m
Classification
- Deposit Type
- other
- Program
- exploration
- Sample Type
- drill
- Group ID
- 25TK0565:420.00-448.58
- Mining Method
- underground
Location
- Easting
- 490998.2
- Northing
- 5168295.3
- CRS
- UTM Zone 15N, NAD83
- Elevation
- 388 m
- Azimuth
- 85.7 °
- Dip
- -88.3 °
- Loc. Confidence
- high
QA/QC
- Laboratory
- ALS Minerals
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicate_samples
Metal Equivalent
- Metal Eq. Grade
- 2.24
- Metal Eq. Unit
- % CuEq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-03-11T00:00:00.000Z
Reasoning: The CuEq grade of 2.24% over 28.58m is a moderate metal equivalent grade over a good width, contributing to the overall mineralization.
Positive factors
- Moderate metal equivalent grade
- Moderate intercept length
Negative factors
- Apparent width only
- Cut-off grade undisclosed
Evidence · table
“2.24”
Context: 28.58
Rejected tags
Rejected tags — excluded from scoring because their label or evidence could not be verified.
Apparent Width OnlyRejected · negative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Reason: The document explicitly states 'Length refers to drill hole length and not True Width. True Width is unknown at the time of publication.'
Evidence · text
“Length refers to drill hole length and not True Width. True Width is unknown at the time of publication.”
Cut-off UndisclosedRejected · negative
High-grade interval reported without stating the cut-off grade used for compositing.
Reason: The cut-off grade used for compositing this interval is not disclosed in the document.
Evidence · text
“The document does not state the cut-off grade for this interval.”
Infill DrillingRejected · neutral
Confirmatory drilling to raise resource confidence, not new discovery.
Reason: The drilling in the 138 Zone is described as 'infill the current 138 Zone, which sits above the Vault Zone'.
Evidence · text
“Surface drilling targeting the Vault Zone is continuing to infill the current 138 Zone”
25TK0565Tamarack Nickel-Copper-Cobalt Project · cobaltGrade: 0.02Grade Unit: %Intercept: 28.58 mView all detailsHide details
Identity
- Hole ID
- 25TK0565
- Project
- Tamarack Nickel-Copper-Cobalt Project
- Commodity
- cobalt
- Region
- minnesota
- Reported Region
- Minnesota
- Ticker
- TLO
Geometry
- Grade
- 0.02
- Grade Unit
- %
- Intercept
- 28.58 m
- From
- 420 m
- To
- 448.58 m
- Hole Depth
- 787.3 m
Classification
- Deposit Type
- other
- Program
- exploration
- Sample Type
- drill
- Group ID
- 25TK0565:420.00-448.58
- Mining Method
- underground
Location
- Easting
- 490998.2
- Northing
- 5168295.3
- CRS
- UTM Zone 15N, NAD83
- Elevation
- 388 m
- Azimuth
- 85.7 °
- Dip
- -88.3 °
- Loc. Confidence
- high
QA/QC
- Laboratory
- ALS Minerals
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicate_samples
Metal Equivalent
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-03-11T00:00:00.000Z
Reasoning: The cobalt grade of 0.02% over 28.58m is considered weak, but it is a byproduct credit.
Negative factors
- Weak grade
- Apparent width only
- Cut-off grade undisclosed
Evidence · table
“0.02”
Context: 28.58
Rejected tags
Rejected tags — excluded from scoring because their label or evidence could not be verified.
Apparent Width OnlyRejected · negative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Reason: The document explicitly states 'Length refers to drill hole length and not True Width. True Width is unknown at the time of publication.'
Evidence · text
“Length refers to drill hole length and not True Width. True Width is unknown at the time of publication.”
Cut-off UndisclosedRejected · negative
High-grade interval reported without stating the cut-off grade used for compositing.
Reason: The cut-off grade used for compositing this interval is not disclosed in the document.
Evidence · text
“The document does not state the cut-off grade for this interval.”
Infill DrillingRejected · neutral
Confirmatory drilling to raise resource confidence, not new discovery.
Reason: The drilling in the 138 Zone is described as 'infill the current 138 Zone, which sits above the Vault Zone'.
Evidence · text
“Surface drilling targeting the Vault Zone is continuing to infill the current 138 Zone”
25TK0565Tamarack Nickel-Copper-Cobalt Project · palladiumGrade: 0.08Grade Unit: g/tIntercept: 28.58 mView all detailsHide details
Identity
- Hole ID
- 25TK0565
- Project
- Tamarack Nickel-Copper-Cobalt Project
- Commodity
- palladium
- Region
- minnesota
- Reported Region
- Minnesota
- Ticker
- TLO
Geometry
- Grade
- 0.08
- Grade Unit
- g/t
- Intercept
- 28.58 m
- From
- 420 m
- To
- 448.58 m
- Hole Depth
- 787.3 m
Classification
- Deposit Type
- other
- Program
- exploration
- Sample Type
- drill
- Group ID
- 25TK0565:420.00-448.58
- Mining Method
- underground
Location
- Easting
- 490998.2
- Northing
- 5168295.3
- CRS
- UTM Zone 15N, NAD83
- Elevation
- 388 m
- Azimuth
- 85.7 °
- Dip
- -88.3 °
- Loc. Confidence
- high
QA/QC
- Laboratory
- ALS Minerals
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicate_samples
Metal Equivalent
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-03-11T00:00:00.000Z
Reasoning: The palladium grade of 0.08 g/t over 28.58m is considered weak, but it is a byproduct credit.
Negative factors
- Weak grade
- Apparent width only
- Cut-off grade undisclosed
Evidence · table
“0.08”
Context: 28.58
Rejected tags
Rejected tags — excluded from scoring because their label or evidence could not be verified.
Apparent Width OnlyRejected · negative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Reason: The document explicitly states 'Length refers to drill hole length and not True Width. True Width is unknown at the time of publication.'
Evidence · text
“Length refers to drill hole length and not True Width. True Width is unknown at the time of publication.”
Cut-off UndisclosedRejected · negative
High-grade interval reported without stating the cut-off grade used for compositing.
Reason: The cut-off grade used for compositing this interval is not disclosed in the document.
Evidence · text
“The document does not state the cut-off grade for this interval.”
Infill DrillingRejected · neutral
Confirmatory drilling to raise resource confidence, not new discovery.
Reason: The drilling in the 138 Zone is described as 'infill the current 138 Zone, which sits above the Vault Zone'.
Evidence · text
“Surface drilling targeting the Vault Zone is continuing to infill the current 138 Zone”
25TK0565Tamarack Nickel-Copper-Cobalt Project · platinumGrade: 0.14Grade Unit: g/tIntercept: 28.58 mView all detailsHide details
Identity
- Hole ID
- 25TK0565
- Project
- Tamarack Nickel-Copper-Cobalt Project
- Commodity
- platinum
- Region
- minnesota
- Reported Region
- Minnesota
- Ticker
- TLO
Geometry
- Grade
- 0.14
- Grade Unit
- g/t
- Intercept
- 28.58 m
- From
- 420 m
- To
- 448.58 m
- Hole Depth
- 787.3 m
Classification
- Deposit Type
- other
- Program
- exploration
- Sample Type
- drill
- Group ID
- 25TK0565:420.00-448.58
- Mining Method
- underground
Location
- Easting
- 490998.2
- Northing
- 5168295.3
- CRS
- UTM Zone 15N, NAD83
- Elevation
- 388 m
- Azimuth
- 85.7 °
- Dip
- -88.3 °
- Loc. Confidence
- high
QA/QC
- Laboratory
- ALS Minerals
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicate_samples
Metal Equivalent
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-03-11T00:00:00.000Z
Reasoning: The platinum grade of 0.14 g/t over 28.58m is considered weak, but it is a byproduct credit.
Negative factors
- Weak grade
- Apparent width only
- Cut-off grade undisclosed
Evidence · table
“0.14”
Context: 28.58
Rejected tags
Rejected tags — excluded from scoring because their label or evidence could not be verified.
Apparent Width OnlyRejected · negative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Reason: The document explicitly states 'Length refers to drill hole length and not True Width. True Width is unknown at the time of publication.'
Evidence · text
“Length refers to drill hole length and not True Width. True Width is unknown at the time of publication.”
Cut-off UndisclosedRejected · negative
High-grade interval reported without stating the cut-off grade used for compositing.
Reason: The cut-off grade used for compositing this interval is not disclosed in the document.
Evidence · text
“The document does not state the cut-off grade for this interval.”
Infill DrillingRejected · neutral
Confirmatory drilling to raise resource confidence, not new discovery.
Reason: The drilling in the 138 Zone is described as 'infill the current 138 Zone, which sits above the Vault Zone'.
Evidence · text
“Surface drilling targeting the Vault Zone is continuing to infill the current 138 Zone”
25TK0565Tamarack Nickel-Copper-Cobalt Project · goldGrade: 0.12Grade Unit: g/tIntercept: 28.58 mView all detailsHide details
Identity
- Hole ID
- 25TK0565
- Project
- Tamarack Nickel-Copper-Cobalt Project
- Commodity
- gold
- Region
- minnesota
- Reported Region
- Minnesota
- Ticker
- TLO
Geometry
- Grade
- 0.12
- Grade Unit
- g/t
- Intercept
- 28.58 m
- From
- 420 m
- To
- 448.58 m
- Hole Depth
- 787.3 m
Classification
- Deposit Type
- other
- Program
- exploration
- Sample Type
- drill
- Group ID
- 25TK0565:420.00-448.58
- Mining Method
- underground
Location
- Easting
- 490998.2
- Northing
- 5168295.3
- CRS
- UTM Zone 15N, NAD83
- Elevation
- 388 m
- Azimuth
- 85.7 °
- Dip
- -88.3 °
- Loc. Confidence
- high
QA/QC
- Laboratory
- ALS Minerals
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicate_samples
Metal Equivalent
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-03-11T00:00:00.000Z
Reasoning: The gold grade of 0.12 g/t over 28.58m is considered weak, but it is a byproduct credit.
Negative factors
- Weak grade
- Apparent width only
- Cut-off grade undisclosed
Evidence · table
“0.12”
Context: 28.58
Rejected tags
Rejected tags — excluded from scoring because their label or evidence could not be verified.
Apparent Width OnlyRejected · negative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Reason: The document explicitly states 'Length refers to drill hole length and not True Width. True Width is unknown at the time of publication.'
Evidence · text
“Length refers to drill hole length and not True Width. True Width is unknown at the time of publication.”
Cut-off UndisclosedRejected · negative
High-grade interval reported without stating the cut-off grade used for compositing.
Reason: The cut-off grade used for compositing this interval is not disclosed in the document.
Evidence · text
“The document does not state the cut-off grade for this interval.”
Infill DrillingRejected · neutral
Confirmatory drilling to raise resource confidence, not new discovery.
Reason: The drilling in the 138 Zone is described as 'infill the current 138 Zone, which sits above the Vault Zone'.
Evidence · text
“Surface drilling targeting the Vault Zone is continuing to infill the current 138 Zone”
25TK0565Tamarack Nickel-Copper-Cobalt Project · nickelIntercept: 52 mView all detailsHide details
Identity
- Hole ID
- 25TK0565
- Project
- Tamarack Nickel-Copper-Cobalt Project
- Commodity
- nickel
- Region
- minnesota
- Reported Region
- Minnesota
- Ticker
- TLO
Geometry
- Intercept
- 52 m
- From
- 457.5 m
- To
- 509.5 m
- Hole Depth
- 787.3 m
Classification
- Deposit Type
- other
- Program
- exploration
- Sample Type
- drill
- Group ID
- 25TK0565:457.50-509.50
- Mining Method
- underground
Location
- Easting
- 490998.2
- Northing
- 5168295.3
- CRS
- UTM Zone 15N, NAD83
- Elevation
- 388 m
- Azimuth
- 85.7 °
- Dip
- -88.3 °
- Loc. Confidence
- high
QA/QC
- Laboratory
- ALS Minerals
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicate_samples
Metal Equivalent
- Metal Eq. Grade
- 1.15
- Metal Eq. Unit
- % NiEq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-03-11T00:00:00.000Z
Reasoning: The NiEq grade of 1.15% over 52.00m is a moderate metal equivalent grade over a significant width, contributing to the overall mineralization.
Positive factors
- Moderate metal equivalent grade
- Continuous intercept
Negative factors
- Apparent width only
- Cut-off grade undisclosed
Evidence · table
“1.15”
Context: 52.00
Rejected tags
Rejected tags — excluded from scoring because their label or evidence could not be verified.
Apparent Width OnlyRejected · negative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Reason: The document explicitly states 'Length refers to drill hole length and not True Width. True Width is unknown at the time of publication.'
Evidence · text
“Length refers to drill hole length and not True Width. True Width is unknown at the time of publication.”
Cut-off UndisclosedRejected · negative
High-grade interval reported without stating the cut-off grade used for compositing.
Reason: The cut-off grade used for compositing this interval is not disclosed in the document.
Evidence · text
“The document does not state the cut-off grade for this interval.”
Infill DrillingRejected · neutral
Confirmatory drilling to raise resource confidence, not new discovery.
Reason: The drilling in the 138 Zone is described as 'infill the current 138 Zone, which sits above the Vault Zone'.
Evidence · text
“Surface drilling targeting the Vault Zone is continuing to infill the current 138 Zone”
25TK0565Tamarack Nickel-Copper-Cobalt Project · copperIntercept: 52 mView all detailsHide details
Identity
- Hole ID
- 25TK0565
- Project
- Tamarack Nickel-Copper-Cobalt Project
- Commodity
- copper
- Region
- minnesota
- Reported Region
- Minnesota
- Ticker
- TLO
Geometry
- Intercept
- 52 m
- From
- 457.5 m
- To
- 509.5 m
- Hole Depth
- 787.3 m
Classification
- Deposit Type
- other
- Program
- exploration
- Sample Type
- drill
- Group ID
- 25TK0565:457.50-509.50
- Mining Method
- underground
Location
- Easting
- 490998.2
- Northing
- 5168295.3
- CRS
- UTM Zone 15N, NAD83
- Elevation
- 388 m
- Azimuth
- 85.7 °
- Dip
- -88.3 °
- Loc. Confidence
- high
QA/QC
- Laboratory
- ALS Minerals
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicate_samples
Metal Equivalent
- Metal Eq. Grade
- 2.09
- Metal Eq. Unit
- % CuEq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-03-11T00:00:00.000Z
Reasoning: The CuEq grade of 2.09% over 52.00m is a moderate metal equivalent grade over a significant width, contributing to the overall mineralization.
Positive factors
- Moderate metal equivalent grade
- Continuous intercept
Negative factors
- Apparent width only
- Cut-off grade undisclosed
Evidence · table
“2.09”
Context: 52.00
Rejected tags
Rejected tags — excluded from scoring because their label or evidence could not be verified.
Apparent Width OnlyRejected · negative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Reason: The document explicitly states 'Length refers to drill hole length and not True Width. True Width is unknown at the time of publication.'
Evidence · text
“Length refers to drill hole length and not True Width. True Width is unknown at the time of publication.”
Cut-off UndisclosedRejected · negative
High-grade interval reported without stating the cut-off grade used for compositing.
Reason: The cut-off grade used for compositing this interval is not disclosed in the document.
Evidence · text
“The document does not state the cut-off grade for this interval.”
Infill DrillingRejected · neutral
Confirmatory drilling to raise resource confidence, not new discovery.
Reason: The drilling in the 138 Zone is described as 'infill the current 138 Zone, which sits above the Vault Zone'.
Evidence · text
“Surface drilling targeting the Vault Zone is continuing to infill the current 138 Zone”
25TK0565Tamarack Nickel-Copper-Cobalt Project · cobaltGrade: 0.02Grade Unit: %Intercept: 52 mView all detailsHide details
Identity
- Hole ID
- 25TK0565
- Project
- Tamarack Nickel-Copper-Cobalt Project
- Commodity
- cobalt
- Region
- minnesota
- Reported Region
- Minnesota
- Ticker
- TLO
Geometry
- Grade
- 0.02
- Grade Unit
- %
- Intercept
- 52 m
- From
- 457.5 m
- To
- 509.5 m
- Hole Depth
- 787.3 m
Classification
- Deposit Type
- other
- Program
- exploration
- Sample Type
- drill
- Group ID
- 25TK0565:457.50-509.50
- Mining Method
- underground
Location
- Easting
- 490998.2
- Northing
- 5168295.3
- CRS
- UTM Zone 15N, NAD83
- Elevation
- 388 m
- Azimuth
- 85.7 °
- Dip
- -88.3 °
- Loc. Confidence
- high
QA/QC
- Laboratory
- ALS Minerals
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicate_samples
Metal Equivalent
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-03-11T00:00:00.000Z
Reasoning: The cobalt grade of 0.02% over 52.00m is considered weak, but it is a byproduct credit in a long intercept.
Negative factors
- Weak grade
- Apparent width only
- Cut-off grade undisclosed
Evidence · table
“0.02”
Context: 52.00
Rejected tags
Rejected tags — excluded from scoring because their label or evidence could not be verified.
Apparent Width OnlyRejected · negative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Reason: The document explicitly states 'Length refers to drill hole length and not True Width. True Width is unknown at the time of publication.'
Evidence · text
“Length refers to drill hole length and not True Width. True Width is unknown at the time of publication.”
Cut-off UndisclosedRejected · negative
High-grade interval reported without stating the cut-off grade used for compositing.
Reason: The cut-off grade used for compositing this interval is not disclosed in the document.
Evidence · text
“The document does not state the cut-off grade for this interval.”
Infill DrillingRejected · neutral
Confirmatory drilling to raise resource confidence, not new discovery.
Reason: The drilling in the 138 Zone is described as 'infill the current 138 Zone, which sits above the Vault Zone'.
Evidence · text
“Surface drilling targeting the Vault Zone is continuing to infill the current 138 Zone”
25TK0565Tamarack Nickel-Copper-Cobalt Project · palladiumGrade: 0.11Grade Unit: g/tIntercept: 52 mView all detailsHide details
Identity
- Hole ID
- 25TK0565
- Project
- Tamarack Nickel-Copper-Cobalt Project
- Commodity
- palladium
- Region
- minnesota
- Reported Region
- Minnesota
- Ticker
- TLO
Geometry
- Grade
- 0.11
- Grade Unit
- g/t
- Intercept
- 52 m
- From
- 457.5 m
- To
- 509.5 m
- Hole Depth
- 787.3 m
Classification
- Deposit Type
- other
- Program
- exploration
- Sample Type
- drill
- Group ID
- 25TK0565:457.50-509.50
- Mining Method
- underground
Location
- Easting
- 490998.2
- Northing
- 5168295.3
- CRS
- UTM Zone 15N, NAD83
- Elevation
- 388 m
- Azimuth
- 85.7 °
- Dip
- -88.3 °
- Loc. Confidence
- high
QA/QC
- Laboratory
- ALS Minerals
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicate_samples
Metal Equivalent
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-03-11T00:00:00.000Z
Reasoning: The palladium grade of 0.11 g/t over 52.00m is considered weak, but it is a byproduct credit in a long intercept.
Negative factors
- Weak grade
- Apparent width only
- Cut-off grade undisclosed
Evidence · table
“0.11”
Context: 52.00
Rejected tags
Rejected tags — excluded from scoring because their label or evidence could not be verified.
Apparent Width OnlyRejected · negative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Reason: The document explicitly states 'Length refers to drill hole length and not True Width. True Width is unknown at the time of publication.'
Evidence · text
“Length refers to drill hole length and not True Width. True Width is unknown at the time of publication.”
Cut-off UndisclosedRejected · negative
High-grade interval reported without stating the cut-off grade used for compositing.
Reason: The cut-off grade used for compositing this interval is not disclosed in the document.
Evidence · text
“The document does not state the cut-off grade for this interval.”
Infill DrillingRejected · neutral
Confirmatory drilling to raise resource confidence, not new discovery.
Reason: The drilling in the 138 Zone is described as 'infill the current 138 Zone, which sits above the Vault Zone'.
Evidence · text
“Surface drilling targeting the Vault Zone is continuing to infill the current 138 Zone”
25TK0565Tamarack Nickel-Copper-Cobalt Project · platinumGrade: 0.19Grade Unit: g/tIntercept: 52 mView all detailsHide details
Identity
- Hole ID
- 25TK0565
- Project
- Tamarack Nickel-Copper-Cobalt Project
- Commodity
- platinum
- Region
- minnesota
- Reported Region
- Minnesota
- Ticker
- TLO
Geometry
- Grade
- 0.19
- Grade Unit
- g/t
- Intercept
- 52 m
- From
- 457.5 m
- To
- 509.5 m
- Hole Depth
- 787.3 m
Classification
- Deposit Type
- other
- Program
- exploration
- Sample Type
- drill
- Group ID
- 25TK0565:457.50-509.50
- Mining Method
- underground
Location
- Easting
- 490998.2
- Northing
- 5168295.3
- CRS
- UTM Zone 15N, NAD83
- Elevation
- 388 m
- Azimuth
- 85.7 °
- Dip
- -88.3 °
- Loc. Confidence
- high
QA/QC
- Laboratory
- ALS Minerals
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicate_samples
Metal Equivalent
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-03-11T00:00:00.000Z
Reasoning: The platinum grade of 0.19 g/t over 52.00m is considered weak, but it is a byproduct credit in a long intercept.
Negative factors
- Weak grade
- Apparent width only
- Cut-off grade undisclosed
Evidence · table
“0.19”
Context: 52.00
Rejected tags
Rejected tags — excluded from scoring because their label or evidence could not be verified.
Apparent Width OnlyRejected · negative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Reason: The document explicitly states 'Length refers to drill hole length and not True Width. True Width is unknown at the time of publication.'
Evidence · text
“Length refers to drill hole length and not True Width. True Width is unknown at the time of publication.”
Cut-off UndisclosedRejected · negative
High-grade interval reported without stating the cut-off grade used for compositing.
Reason: The cut-off grade used for compositing this interval is not disclosed in the document.
Evidence · text
“The document does not state the cut-off grade for this interval.”
Infill DrillingRejected · neutral
Confirmatory drilling to raise resource confidence, not new discovery.
Reason: The drilling in the 138 Zone is described as 'infill the current 138 Zone, which sits above the Vault Zone'.
Evidence · text
“Surface drilling targeting the Vault Zone is continuing to infill the current 138 Zone”
25TK0565Tamarack Nickel-Copper-Cobalt Project · goldGrade: 0.12Grade Unit: g/tIntercept: 52 mView all detailsHide details
Identity
- Hole ID
- 25TK0565
- Project
- Tamarack Nickel-Copper-Cobalt Project
- Commodity
- gold
- Region
- minnesota
- Reported Region
- Minnesota
- Ticker
- TLO
Geometry
- Grade
- 0.12
- Grade Unit
- g/t
- Intercept
- 52 m
- From
- 457.5 m
- To
- 509.5 m
- Hole Depth
- 787.3 m
Classification
- Deposit Type
- other
- Program
- exploration
- Sample Type
- drill
- Group ID
- 25TK0565:457.50-509.50
- Mining Method
- underground
Location
- Easting
- 490998.2
- Northing
- 5168295.3
- CRS
- UTM Zone 15N, NAD83
- Elevation
- 388 m
- Azimuth
- 85.7 °
- Dip
- -88.3 °
- Loc. Confidence
- high
QA/QC
- Laboratory
- ALS Minerals
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicate_samples
Metal Equivalent
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-03-11T00:00:00.000Z
Reasoning: The gold grade of 0.12 g/t over 52.00m is considered weak, but it is a byproduct credit in a long intercept.
Negative factors
- Weak grade
- Apparent width only
- Cut-off grade undisclosed
Evidence · table
“0.12”
Context: 52.00
Rejected tags
Rejected tags — excluded from scoring because their label or evidence could not be verified.
Apparent Width OnlyRejected · negative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Reason: The document explicitly states 'Length refers to drill hole length and not True Width. True Width is unknown at the time of publication.'
Evidence · text
“Length refers to drill hole length and not True Width. True Width is unknown at the time of publication.”
Cut-off UndisclosedRejected · negative
High-grade interval reported without stating the cut-off grade used for compositing.
Reason: The cut-off grade used for compositing this interval is not disclosed in the document.
Evidence · text
“The document does not state the cut-off grade for this interval.”
Infill DrillingRejected · neutral
Confirmatory drilling to raise resource confidence, not new discovery.
Reason: The drilling in the 138 Zone is described as 'infill the current 138 Zone, which sits above the Vault Zone'.
Evidence · text
“Surface drilling targeting the Vault Zone is continuing to infill the current 138 Zone”
25TK0563DTamarack Nickel-Copper-Cobalt ProjectIntercept: 3 mView all detailsHide details
Identity
- Hole ID
- 25TK0563D
- Project
- Tamarack Nickel-Copper-Cobalt Project
- Region
- minnesota
- Reported Region
- Minnesota
- Ticker
- TLO
Geometry
- Intercept
- 3 m
- From
- 759.38 m
- To
- 762.38 m
- Hole Depth
- 913.2 m
Classification
- Deposit Type
- other
- Program
- exploration
- Sample Type
- drill
- Group ID
- 25TK0563D:759.38-762.38
- Mining Method
- underground
Location
- Easting
- 491049.3
- Northing
- 5168348.9
- CRS
- UTM Zone 15N, NAD83
- Elevation
- 388 m
- Azimuth
- 170.4 °
- Dip
- -85.4 °
- Loc. Confidence
- high
QA/QC
- Laboratory
- ALS Minerals
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicate_samples
Metal Equivalent
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-03-11T00:00:00.000Z
Reasoning: This new 3-meter intercept in hole 25TK0563D represents a successful step-out, extending mineralization, but assays are pending so the grade is unknown.
Positive factors
- Step-Out Extension
- New intercept
Negative factors
- Assays pending
- Apparent width only
Evidence · text
“New drill hole 25TK0563D ... intercepted 3 meters of Massive Sulphide Unit ("MSU") and Mixed Massive Sulphides ("MMS") starting at 759.38 meters”
Rejected tags
Rejected tags — excluded from scoring because their label or evidence could not be verified.
Step-Out ExtensionRejected · positive
Mineralization extended beyond the previously known limit.
Reason: Drill hole 25TK0563D is explicitly described as a '10-meter step-out to the east' of a discovery drill hole.
Evidence · text
“This intercept represents a 10-meter step-out to the east of the upper part of discovery drill hole 25TK0563.”
Apparent Width OnlyRejected · negative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Reason: The document explicitly states 'Length refers to drill hole length and not True Width. True Width is unknown at the time of publication.'
Evidence · text
“Length refers to drill hole length and not True Width. True Width is unknown at the time of publication.”
25TK0569Tamarack Nickel-Copper-Cobalt ProjectIntercept: 18.91 mView all detailsHide details
Identity
- Hole ID
- 25TK0569
- Project
- Tamarack Nickel-Copper-Cobalt Project
- Region
- minnesota
- Reported Region
- Minnesota
- Ticker
- TLO
Geometry
- Intercept
- 18.91 m
- From
- 640.84 m
- To
- 659.75 m
- Hole Depth
- 906.2 m
Classification
- Deposit Type
- other
- Program
- exploration
- Sample Type
- drill
- Group ID
- 25TK0569:640.84-659.75
- Mining Method
- underground
Location
- Easting
- 490999.3
- Northing
- 5168292.8
- CRS
- UTM Zone 15N, NAD83
- Elevation
- 388 m
- Azimuth
- 89.3 °
- Dip
- -86 °
- Loc. Confidence
- high
QA/QC
- Laboratory
- ALS Minerals
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicate_samples
Metal Equivalent
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-03-11T00:00:00.000Z
Reasoning: This new 18.91-meter intercept in hole 25TK0569 represents a successful step-out, extending mineralization in the Stringer Zone, but assays are pending so the grade is unknown.
Positive factors
- Step-Out Extension
- New intercept
- Significant intercept length
Negative factors
- Assays pending
- Apparent width only
Evidence · text
“New drill hole 25TK0569 in the Stringer Zone, intercepted 18.91 meters of MMS Stringers starting at 640.84 meters.”
Rejected tags
Rejected tags — excluded from scoring because their label or evidence could not be verified.
Step-Out ExtensionRejected · positive
Mineralization extended beyond the previously known limit.
Reason: Drill hole 25TK0569 is explicitly described as a '17-meter step-out from 25TK0565'.
Evidence · text
“This hole is a 17-meter step-out from 25TK0565”
Apparent Width OnlyRejected · negative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Reason: The document explicitly states 'Length refers to drill hole length and not True Width. True Width is unknown at the time of publication.'
Evidence · text
“Length refers to drill hole length and not True Width. True Width is unknown at the time of publication.”
25TK0565Tamarack Nickel-Copper-Cobalt Project · nickelIntercept: 19.11 mHistorical resultNeeds review: historical_restatementView all detailsHide details
Identity
- Hole ID
- 25TK0565
- Project
- Tamarack Nickel-Copper-Cobalt Project
- Commodity
- nickel
- Region
- minnesota
- Reported Region
- Minnesota
- Ticker
- TLO
Geometry
- Intercept
- 19.11 m
- From
- 670 m
- To
- 689.11 m
Classification
- Deposit Type
- other
- Program
- exploration
- Sample Type
- drill
- Group ID
- 25TK0565:670.00-689.11
- Mining Method
- underground
QA/QC
- Laboratory
- ALS Minerals
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicate_samples
Metal Equivalent
- Metal Eq. Grade
- 6.39
- Metal Eq. Unit
- % NiEq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- Yes
- Review Reason
- historical_restatement
- Interp. Status
- scored
- Historical
- Yes
- Historical Source Date
- 2025-06-05T00:00:00.000Z
Dates
- Event date
- 2026-03-11T00:00:00.000Z
Reasoning: This historical intercept of 6.39% NiEq over 19.11m is a strong metal equivalent grade over a significant width, but it is a re-release of previously reported data.
Positive factors
- Strong metal equivalent grade
- Significant intercept length
Negative factors
- Stale Data Re-release
- Apparent width only
- Cut-off grade undisclosed
Evidence · text
“6.39% NiEq”
Context: 25TK0565, which previously intercepted 19.11 meters grading 2.38% Ni
Rejected tags
Rejected tags — excluded from scoring because their label or evidence could not be verified.
Stale Data Re-releaseRejected · negative
Historical results re-announced with no new assays or reinterpretation — low genuine novelty.
Reason: This intercept is explicitly stated as 'previously intercepted' and refers to a 'June 5, 2025 press release'.
Evidence · text
“As outlined in the Company's June 5, 2025 press release, the Vault Zone discovery drill hole 25TK0563 intercepted a combined 34.9 meters of MSU mineralization grading 14.86% Ni, 15.37% Cu, 0.11% Co, 24.96 g/t Pt+Pd, and 9.18 g/t Au (28.88% NiEq or 57.76% CuEq) starting at 762.34 meters, demonstrating a new mineralized system beyond the existing resource footprint.”
Apparent Width OnlyRejected · negative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Reason: The document explicitly states 'Length refers to drill hole length and not True Width. True Width is unknown at the time of publication.'
Evidence · text
“Length refers to drill hole length and not True Width. True Width is unknown at the time of publication.”
Cut-off UndisclosedRejected · negative
High-grade interval reported without stating the cut-off grade used for compositing.
Reason: The cut-off grade used for compositing this interval is not disclosed in the document.
Evidence · text
“The document does not state the cut-off grade for this interval.”
25TK0565Tamarack Nickel-Copper-Cobalt Project · copperIntercept: 19.11 mHistorical resultNeeds review: historical_restatementView all detailsHide details
Identity
- Hole ID
- 25TK0565
- Project
- Tamarack Nickel-Copper-Cobalt Project
- Commodity
- copper
- Region
- minnesota
- Reported Region
- Minnesota
- Ticker
- TLO
Geometry
- Intercept
- 19.11 m
- From
- 670 m
- To
- 689.11 m
Classification
- Deposit Type
- other
- Program
- exploration
- Sample Type
- drill
- Group ID
- 25TK0565:670.00-689.11
- Mining Method
- underground
QA/QC
- Laboratory
- ALS Minerals
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicate_samples
Metal Equivalent
- Metal Eq. Grade
- 11.67
- Metal Eq. Unit
- % CuEq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- Yes
- Review Reason
- historical_restatement
- Interp. Status
- scored
- Historical
- Yes
- Historical Source Date
- 2025-06-05T00:00:00.000Z
Dates
- Event date
- 2026-03-11T00:00:00.000Z
Reasoning: This historical intercept of 11.67% CuEq over 19.11m is a strong metal equivalent grade over a significant width, but it is a re-release of previously reported data.
Positive factors
- Strong metal equivalent grade
- Significant intercept length
Negative factors
- Stale Data Re-release
- Apparent width only
- Cut-off grade undisclosed
Evidence · text
“11.67% CuEq”
Context: 25TK0565, which previously intercepted 19.11 meters grading 2.38% Ni
Rejected tags
Rejected tags — excluded from scoring because their label or evidence could not be verified.
Stale Data Re-releaseRejected · negative
Historical results re-announced with no new assays or reinterpretation — low genuine novelty.
Reason: This intercept is explicitly stated as 'previously intercepted' and refers to a 'June 5, 2025 press release'.
Evidence · text
“As outlined in the Company's June 5, 2025 press release, the Vault Zone discovery drill hole 25TK0563 intercepted a combined 34.9 meters of MSU mineralization grading 14.86% Ni, 15.37% Cu, 0.11% Co, 24.96 g/t Pt+Pd, and 9.18 g/t Au (28.88% NiEq or 57.76% CuEq) starting at 762.34 meters, demonstrating a new mineralized system beyond the existing resource footprint.”
Apparent Width OnlyRejected · negative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Reason: The document explicitly states 'Length refers to drill hole length and not True Width. True Width is unknown at the time of publication.'
Evidence · text
“Length refers to drill hole length and not True Width. True Width is unknown at the time of publication.”
Cut-off UndisclosedRejected · negative
High-grade interval reported without stating the cut-off grade used for compositing.
Reason: The cut-off grade used for compositing this interval is not disclosed in the document.
Evidence · text
“The document does not state the cut-off grade for this interval.”
25TK0565Tamarack Nickel-Copper-Cobalt Project · cobaltGrade: 0.03Grade Unit: %Intercept: 19.11 mHistorical resultNeeds review: historical_restatementView all detailsHide details
Identity
- Hole ID
- 25TK0565
- Project
- Tamarack Nickel-Copper-Cobalt Project
- Commodity
- cobalt
- Region
- minnesota
- Reported Region
- Minnesota
- Ticker
- TLO
Geometry
- Grade
- 0.03
- Grade Unit
- %
- Intercept
- 19.11 m
- From
- 670 m
- To
- 689.11 m
Classification
- Deposit Type
- other
- Program
- exploration
- Sample Type
- drill
- Group ID
- 25TK0565:670.00-689.11
- Mining Method
- underground
QA/QC
- Laboratory
- ALS Minerals
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicate_samples
Metal Equivalent
- Assumptions Disclosed
- Yes
Review
- Needs Review
- Yes
- Review Reason
- historical_restatement
- Interp. Status
- scored
- Historical
- Yes
- Historical Source Date
- 2025-06-05T00:00:00.000Z
Dates
- Event date
- 2026-03-11T00:00:00.000Z
Reasoning: This historical intercept of 0.03% Co over 19.11m is considered weak, but it is a byproduct credit in a re-released intercept.
Negative factors
- Stale Data Re-release
- Weak grade
- Apparent width only
- Cut-off grade undisclosed
Evidence · text
“0.03% Co”
Context: 25TK0565, which previously intercepted 19.11 meters grading 2.38% Ni
Rejected tags
Rejected tags — excluded from scoring because their label or evidence could not be verified.
Stale Data Re-releaseRejected · negative
Historical results re-announced with no new assays or reinterpretation — low genuine novelty.
Reason: This intercept is explicitly stated as 'previously intercepted' and refers to a 'June 5, 2025 press release'.
Evidence · text
“As outlined in the Company's June 5, 2025 press release, the Vault Zone discovery drill hole 25TK0563 intercepted a combined 34.9 meters of MSU mineralization grading 14.86% Ni, 15.37% Cu, 0.11% Co, 24.96 g/t Pt+Pd, and 9.18 g/t Au (28.88% NiEq or 57.76% CuEq) starting at 762.34 meters, demonstrating a new mineralized system beyond the existing resource footprint.”
Apparent Width OnlyRejected · negative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Reason: The document explicitly states 'Length refers to drill hole length and not True Width. True Width is unknown at the time of publication.'
Evidence · text
“Length refers to drill hole length and not True Width. True Width is unknown at the time of publication.”
Cut-off UndisclosedRejected · negative
High-grade interval reported without stating the cut-off grade used for compositing.
Reason: The cut-off grade used for compositing this interval is not disclosed in the document.
Evidence · text
“The document does not state the cut-off grade for this interval.”
25TK0565Tamarack Nickel-Copper-Cobalt Project · platinumGrade: 3.8Grade Unit: g/tIntercept: 19.11 mHistorical resultNeeds review: historical_restatementView all detailsHide details
Identity
- Hole ID
- 25TK0565
- Project
- Tamarack Nickel-Copper-Cobalt Project
- Commodity
- platinum
- Region
- minnesota
- Reported Region
- Minnesota
- Ticker
- TLO
Geometry
- Grade
- 3.8
- Grade Unit
- g/t
- Intercept
- 19.11 m
- From
- 670 m
- To
- 689.11 m
Classification
- Deposit Type
- other
- Program
- exploration
- Sample Type
- drill
- Group ID
- 25TK0565:670.00-689.11
- Mining Method
- underground
QA/QC
- Laboratory
- ALS Minerals
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicate_samples
Metal Equivalent
- Assumptions Disclosed
- Yes
Review
- Needs Review
- Yes
- Review Reason
- historical_restatement
- Interp. Status
- scored
- Historical
- Yes
- Historical Source Date
- 2025-06-05T00:00:00.000Z
Dates
- Event date
- 2026-03-11T00:00:00.000Z
Reasoning: This historical intercept of 3.80 g/t Pt+Pd over 19.11m is a strong grade over a significant width, but it is a re-release of previously reported data.
Positive factors
- Strong grade
- Significant intercept length
Negative factors
- Stale Data Re-release
- Apparent width only
- Cut-off grade undisclosed
Evidence · text
“3.80g/t Pt+Pd”
Context: 25TK0565, which previously intercepted 19.11 meters grading 2.38% Ni
Rejected tags
Rejected tags — excluded from scoring because their label or evidence could not be verified.
Stale Data Re-releaseRejected · negative
Historical results re-announced with no new assays or reinterpretation — low genuine novelty.
Reason: This intercept is explicitly stated as 'previously intercepted' and refers to a 'June 5, 2025 press release'.
Evidence · text
“As outlined in the Company's June 5, 2025 press release, the Vault Zone discovery drill hole 25TK0563 intercepted a combined 34.9 meters of MSU mineralization grading 14.86% Ni, 15.37% Cu, 0.11% Co, 24.96 g/t Pt+Pd, and 9.18 g/t Au (28.88% NiEq or 57.76% CuEq) starting at 762.34 meters, demonstrating a new mineralized system beyond the existing resource footprint.”
Apparent Width OnlyRejected · negative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Reason: The document explicitly states 'Length refers to drill hole length and not True Width. True Width is unknown at the time of publication.'
Evidence · text
“Length refers to drill hole length and not True Width. True Width is unknown at the time of publication.”
Cut-off UndisclosedRejected · negative
High-grade interval reported without stating the cut-off grade used for compositing.
Reason: The cut-off grade used for compositing this interval is not disclosed in the document.
Evidence · text
“The document does not state the cut-off grade for this interval.”
25TK0565Tamarack Nickel-Copper-Cobalt Project · goldGrade: 2.32Grade Unit: g/tIntercept: 19.11 mHistorical resultNeeds review: historical_restatementView all detailsHide details
Identity
- Hole ID
- 25TK0565
- Project
- Tamarack Nickel-Copper-Cobalt Project
- Commodity
- gold
- Region
- minnesota
- Reported Region
- Minnesota
- Ticker
- TLO
Geometry
- Grade
- 2.32
- Grade Unit
- g/t
- Intercept
- 19.11 m
- From
- 670 m
- To
- 689.11 m
Classification
- Deposit Type
- other
- Program
- exploration
- Sample Type
- drill
- Group ID
- 25TK0565:670.00-689.11
- Mining Method
- underground
QA/QC
- Laboratory
- ALS Minerals
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicate_samples
Metal Equivalent
- Assumptions Disclosed
- Yes
Review
- Needs Review
- Yes
- Review Reason
- historical_restatement
- Interp. Status
- scored
- Historical
- Yes
- Historical Source Date
- 2025-06-05T00:00:00.000Z
Dates
- Event date
- 2026-03-11T00:00:00.000Z
Reasoning: This historical intercept of 2.32 g/t Au over 19.11m is considered weak for underground gold, but it is a re-release of previously reported data.
Negative factors
- Stale Data Re-release
- Weak grade
- Apparent width only
- Cut-off grade undisclosed
Evidence · text
“2.32g/t Au”
Context: 25TK0565, which previously intercepted 19.11 meters grading 2.38% Ni
Rejected tags
Rejected tags — excluded from scoring because their label or evidence could not be verified.
Stale Data Re-releaseRejected · negative
Historical results re-announced with no new assays or reinterpretation — low genuine novelty.
Reason: This intercept is explicitly stated as 'previously intercepted' and refers to a 'June 5, 2025 press release'.
Evidence · text
“As outlined in the Company's June 5, 2025 press release, the Vault Zone discovery drill hole 25TK0563 intercepted a combined 34.9 meters of MSU mineralization grading 14.86% Ni, 15.37% Cu, 0.11% Co, 24.96 g/t Pt+Pd, and 9.18 g/t Au (28.88% NiEq or 57.76% CuEq) starting at 762.34 meters, demonstrating a new mineralized system beyond the existing resource footprint.”
Apparent Width OnlyRejected · negative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Reason: The document explicitly states 'Length refers to drill hole length and not True Width. True Width is unknown at the time of publication.'
Evidence · text
“Length refers to drill hole length and not True Width. True Width is unknown at the time of publication.”
Cut-off UndisclosedRejected · negative
High-grade interval reported without stating the cut-off grade used for compositing.
Reason: The cut-off grade used for compositing this interval is not disclosed in the document.
Evidence · text
“The document does not state the cut-off grade for this interval.”
includingTamarack Nickel-Copper-Cobalt Project · nickelGrade: 14.95Grade Unit: %Intercept: 7.23 mView all detailsHide details
Identity
- Hole ID
- including
- Project
- Tamarack Nickel-Copper-Cobalt Project
- Commodity
- nickel
- Region
- minnesota
- Reported Region
- Minnesota
- Ticker
- TLO
Geometry
- Grade
- 14.95
- Grade Unit
- %
- Intercept
- 7.23 m
- From
- 776.49 m
- To
- 782.2 m
Classification
- Deposit Type
- other
- Sample Type
- drill
- Group ID
- including:776.49-782.2
- Mining Method
- underground
Location
- CRS
- UTM Zone 15N, NAD83
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-03-11T00:00:00.000Z
Reasoning: Expanded from assay table. 14.95 % nickel is exceptional against the default band [3, 1.5, 0.8, 0.3] %.
Positive factors
- 14.95 % nickel is exceptional on the default band.
Negative factors
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“14.95”
Context: including
includingTamarack Nickel-Copper-Cobalt Project · copperGrade: 15.24Grade Unit: %Intercept: 7.23 mView all detailsHide details
Identity
- Hole ID
- including
- Project
- Tamarack Nickel-Copper-Cobalt Project
- Commodity
- copper
- Region
- minnesota
- Reported Region
- Minnesota
- Ticker
- TLO
Geometry
- Grade
- 15.24
- Grade Unit
- %
- Intercept
- 7.23 m
- From
- 776.49 m
- To
- 782.2 m
Classification
- Deposit Type
- other
- Sample Type
- drill
- Group ID
- including:776.49-782.2
- Mining Method
- underground
Location
- CRS
- UTM Zone 15N, NAD83
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-03-11T00:00:00.000Z
Reasoning: Expanded from assay table. 15.24 % copper is exceptional against the default band [2.5, 1, 0.5, 0.25] %. Grade×width 110.2 %·m is moderate (grade alone is exceptional; the better of the two is used).
Positive factors
- 15.24 % copper is exceptional on the default band.
Negative factors
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“15.24”
Context: including
includingTamarack Nickel-Copper-Cobalt Project · cobaltGrade: 0.11Grade Unit: %Intercept: 7.23 mView all detailsHide details
Identity
- Hole ID
- including
- Project
- Tamarack Nickel-Copper-Cobalt Project
- Commodity
- cobalt
- Region
- minnesota
- Reported Region
- Minnesota
- Ticker
- TLO
Geometry
- Grade
- 0.11
- Grade Unit
- %
- Intercept
- 7.23 m
- From
- 776.49 m
- To
- 782.2 m
Classification
- Deposit Type
- other
- Sample Type
- drill
- Group ID
- including:776.49-782.2
- Mining Method
- underground
Location
- CRS
- UTM Zone 15N, NAD83
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-03-11T00:00:00.000Z
Reasoning: Expanded from assay table. 0.11 % cobalt is weak against the default band [0.5, 0.3, 0.15, 0.08] %.
Negative factors
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.11”
Context: including
includingTamarack Nickel-Copper-Cobalt Project · palladiumGrade: 5.23Grade Unit: g/tIntercept: 7.23 mView all detailsHide details
Identity
- Hole ID
- including
- Project
- Tamarack Nickel-Copper-Cobalt Project
- Commodity
- palladium
- Region
- minnesota
- Reported Region
- Minnesota
- Ticker
- TLO
Geometry
- Grade
- 5.23
- Grade Unit
- g/t
- Intercept
- 7.23 m
- From
- 776.49 m
- To
- 782.2 m
Classification
- Deposit Type
- other
- Sample Type
- drill
- Group ID
- including:776.49-782.2
- Mining Method
- underground
Location
- CRS
- UTM Zone 15N, NAD83
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-03-11T00:00:00.000Z
Reasoning: Expanded from assay table: 5.23 g/t palladium. No grade band defined for this commodity, so the score is a placeholder.
Negative factors
- No grade rubric for palladium; intercept not scored.
Evidence · table
“5.23”
Context: including
includingTamarack Nickel-Copper-Cobalt Project · platinumGrade: 9.98Grade Unit: g/tIntercept: 7.23 mView all detailsHide details
Identity
- Hole ID
- including
- Project
- Tamarack Nickel-Copper-Cobalt Project
- Commodity
- platinum
- Region
- minnesota
- Reported Region
- Minnesota
- Ticker
- TLO
Geometry
- Grade
- 9.98
- Grade Unit
- g/t
- Intercept
- 7.23 m
- From
- 776.49 m
- To
- 782.2 m
Classification
- Deposit Type
- other
- Sample Type
- drill
- Group ID
- including:776.49-782.2
- Mining Method
- underground
Location
- CRS
- UTM Zone 15N, NAD83
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-03-11T00:00:00.000Z
Reasoning: Expanded from assay table: 9.98 g/t platinum. No grade band defined for this commodity, so the score is a placeholder.
Negative factors
- No grade rubric for platinum; intercept not scored.
Evidence · table
“9.98”
Context: including
includingTamarack Nickel-Copper-Cobalt Project · goldGrade: 5.24Grade Unit: g/tIntercept: 7.23 mView all detailsHide details
Identity
- Hole ID
- including
- Project
- Tamarack Nickel-Copper-Cobalt Project
- Commodity
- gold
- Region
- minnesota
- Reported Region
- Minnesota
- Ticker
- TLO
Geometry
- Grade
- 5.24
- Grade Unit
- g/t
- Intercept
- 7.23 m
- From
- 776.49 m
- To
- 782.2 m
Classification
- Deposit Type
- other
- Sample Type
- drill
- Group ID
- including:776.49-782.2
- Mining Method
- underground
Location
- CRS
- UTM Zone 15N, NAD83
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-03-11T00:00:00.000Z
Reasoning: Expanded from assay table. 5.24 g/t gold is moderate against the underground mining band [15, 7, 4, 2.5] g/t. Grade×width 37.9 g/t·m is moderate.
Negative factors
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“5.24”
Context: including
includingTamarack Nickel-Copper-Cobalt Project · silverGrade: 28.91Grade Unit: g/tIntercept: 7.23 mView all detailsHide details
Identity
- Hole ID
- including
- Project
- Tamarack Nickel-Copper-Cobalt Project
- Commodity
- silver
- Region
- minnesota
- Reported Region
- Minnesota
- Ticker
- TLO
Geometry
- Grade
- 28.91
- Grade Unit
- g/t
- Intercept
- 7.23 m
- From
- 776.49 m
- To
- 782.2 m
Classification
- Deposit Type
- other
- Sample Type
- drill
- Group ID
- including:776.49-782.2
- Mining Method
- underground
Location
- CRS
- UTM Zone 15N, NAD83
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-03-11T00:00:00.000Z
Reasoning: Expanded from assay table. 28.91 g/t silver is weak against the default band [500, 200, 100, 30] g/t. Grade×width 209.0 g/t·m is weak (grade alone is below; the better of the two is used).
Negative factors
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“28.91”
Context: including
How Atlas produces this analysis
Minestarters Atlas uses automated extraction to summarize mining announcements, identify reported measurements, and classify supporting evidence. Sentiment reflects the extracted narrative and classification rules; it is an interpretation, not a reported measurement. Evidence quotes and context are provided where available. Missing data, low-confidence results, and review flags indicate limitations. Check the original publisher announcement before relying on an interpretation.