Sterling Extends Core MEPS Copper Zone to 700m; Intersects 200m of 0.53% CuEq Including 102m of 0.81% CuEq
Original announcement by orestocks on
- Company
- Sterling Metals Corp.
- Ticker
- SAG.V
- Exchange
- Unavailable
- Region
- Ontario, Canada
- Primary commodity
- Copper
- Secondary commodities
- Gold, Silver, Molybdenum
- Document categories
- Drill results
- Extracted
- 2026-09-16 11:47:47 UTC
Analysis by Minestarters Atlas
Atlas analysis published:
Minestarters Atlas analysis
Summary
Sterling Metals has announced significant drill results from step-out holes SC-26-25 and SC-26-26 at its Soo Copper Project in Ontario, extending the MEPS Copper Zone to 700m. Hole SC-26-26 intersected 397.19m grading 0.37% CuEq from bedrock, including a high-grade section of 101.9m at 0.81% CuEq. These results demonstrate the scale and continuity of the porphyry copper system, which remains open for further expansion.
Reasoning: The drill results from SC-26-26 and SC-26-25 represent a significant step-out, extending the MEPS Copper Zone by over 300m to a total length of 700m within a large 1.3km x 600m mineralized footprint. The intercepts, particularly 200m at 0.53% CuEq and 101.9m at 0.81% CuEq, are strong to exceptional for a porphyry copper system, indicating significant scale and grade continuity. The company has provided full disclosure on metal equivalent calculations and robust QA/QC procedures, enhancing confidence. The primary drawback is the lack of true width information, which is common at this stage but means the reported lengths are apparent.
Positive factors
- Significant step-out drilling extends known mineralization
- Broad intercepts with strong to exceptional copper equivalent grades for a porphyry deposit
- High confidence in geological continuity and scale potential
- Comprehensive QA/QC disclosure and QP sign-off
- Metal equivalent assumptions are fully disclosed
Negative factors
- True widths are not yet known, which may overstate apparent lengths
Facts used in scoring: 42
Classification and evidence
Step-Out Extensionpositive
Mineralization extended beyond the previously known limit.
Why it applies: Drilling in holes SC-26-25 and SC-26-26 extended the MEPS Copper Zone by over 300m westward, demonstrating mineralization beyond the previously known limit.
Evidence · text
“Together, SC-26-25 and SC-26-26 extend the MEPS Copper Zone by over 300m westward to an approximately 700m current length”
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: The release includes detailed QA/QC disclosure, mentioning Actlabs as an independent, accredited laboratory (ISO 17025 and ISO 9001), and the systematic insertion of blanks, duplicates, and certified reference materials.
Evidence · text
“Analytical services were provided by Actlabs, which is an independent, CALA- and SCC-accredited analytical services firm registered to ISO 17025 and ISO 9001 standard.”
QP/CP Signedpositive · Story-specific tag
Qualified Person (QP) or Competent Person (CP) named and signed off — a member of a recognized professional association (e.g., AusIMM, SME, AIG, P.Geo) with relevant experience.
Why it applies: Jeremy Niemi, P.Geo., Senior Vice President, Exploration and Evaluation for Sterling Metals, is named as the Qualified Person who reviewed and approved the technical information.
Evidence · text
“Jeremy Niemi, P.Geo., Senior Vice President, Exploration and Evaluation for Sterling Metals has reviewed and approved the technical information presented herein.”
Compositing Transparentpositive
Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Why it applies: The release explicitly states the assumptions used for the Copper Equivalent (CuEq) calculation, including commodity prices and assumed metallurgical recoveries.
Evidence · text
“Copper Equivalent (CuEq) for drill intersections is calculated based on a three-year trailing average for each commodity (2023, 2024 and 2025), which equates to US$4.18/lb Cu, US$2,600/oz Au, US$30.54/oz Ag and US$21.46/lb Mo, with 80% metallurgical recoveries assumed for all metals.”
Apparent Width Onlynegative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Why it applies: The document states that 'Intervals may not represent true widths, which are not yet known,' indicating that only downhole lengths are reported without true width estimates.
Evidence · text
“Intervals may not represent true widths, which are not yet known”
Extracted facts
Stored fact records: 42. Some facts used in scoring do not have a stored record.
Drill Results (42)
SC-26-25Soo · copperGrade: 0.31Grade Unit: %Intercept: 128 mView all detailsHide details
Identity
- Hole ID
- SC-26-25
- Project
- Soo
- Commodity
- copper
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- SAG.V
Geometry
- Grade
- 0.31
- Grade Unit
- %
- Intercept
- 128 m
- From
- 157 m
- To
- 285 m
- Hole Depth
- 381.5 m
- Intercept Depth
- 157 m
Classification
- Deposit Type
- porphyry
- Program
- exploration
- Sample Type
- drill
- Group ID
- SC-26-25:157-285
- Mining Method
- open_pit
Location
- Easting
- 680708
- Northing
- 5212608
- Elevation
- 450.21 m
- Azimuth
- 135 °
- Dip
- -60 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- Actlabs
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Metal Eq. Grade
- 0.31
- Metal Eq. Unit
- % CuEq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-16T00:00:00.000Z
Reasoning: This intercept from SC-26-25 shows a good continuous length with a strong copper equivalent grade for a porphyry deposit, contributing to the overall extension of the mineralized zone. The grade is above the 75th percentile for porphyry copper deposits.
Positive factors
- Continuous intercept length
- Strong grade for porphyry copper
- Part of a significant step-out program
Negative factors
- True width not known
Evidence · table
“0.31”
Context: 128.00
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "Approximately 300 metres west of our initial discovery, we intersected nearly 400 metres of continuous copper mineraliza"
SC-26-25Soo · copperGrade: 0.4Grade Unit: %Intercept: 82 mView all detailsHide details
Identity
- Hole ID
- SC-26-25
- Project
- Soo
- Commodity
- copper
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- SAG.V
Geometry
- Grade
- 0.4
- Grade Unit
- %
- Intercept
- 82 m
- From
- 198 m
- To
- 280 m
- Hole Depth
- 381.5 m
- Intercept Depth
- 157 m
Classification
- Deposit Type
- porphyry
- Program
- exploration
- Sample Type
- drill
- Group ID
- SC-26-25:198-280
- Mining Method
- open_pit
Location
- Easting
- 680708
- Northing
- 5212608
- Elevation
- 450.21 m
- Azimuth
- 135 °
- Dip
- -60 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- Actlabs
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Metal Eq. Grade
- 0.4
- Metal Eq. Unit
- % CuEq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-16T00:00:00.000Z
Reasoning: This sub-interval from SC-26-25 shows a strong copper equivalent grade over a good width, reinforcing the prospectivity of the area. The grade is above the 75th percentile for porphyry copper deposits.
Positive factors
- Continuous intercept length
- Strong grade for porphyry copper
- Part of a significant step-out program
Negative factors
- True width not known
Evidence · table
“0.40”
Context: 82.00
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "Approximately 300 metres west of our initial discovery, we intersected nearly 400 metres of continuous copper mineraliza"
SC-26-25Soo · copperGrade: 0.86Grade Unit: %Intercept: 24 mView all detailsHide details
Identity
- Hole ID
- SC-26-25
- Project
- Soo
- Commodity
- copper
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- SAG.V
Geometry
- Grade
- 0.86
- Grade Unit
- %
- Intercept
- 24 m
- From
- 244 m
- To
- 268 m
- Hole Depth
- 381.5 m
- Intercept Depth
- 157 m
Classification
- Deposit Type
- porphyry
- Program
- exploration
- Sample Type
- drill
- Group ID
- SC-26-25:244-268
- Mining Method
- open_pit
Location
- Easting
- 680708
- Northing
- 5212608
- Elevation
- 450.21 m
- Azimuth
- 135 °
- Dip
- -60 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- Actlabs
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Metal Eq. Grade
- 0.86
- Metal Eq. Unit
- % CuEq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-16T00:00:00.000Z
Reasoning: This high-grade sub-interval from SC-26-25 is exceptional for a porphyry copper deposit, indicating zones of higher-grade mineralization within the broader envelope. The grade is well above the 75th percentile for porphyry copper deposits.
Positive factors
- Exceptional grade for porphyry copper
- Good continuous intercept length
Negative factors
- True width not known
Evidence · table
“0.86”
Context: 24.00
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "Approximately 300 metres west of our initial discovery, we intersected nearly 400 metres of continuous copper mineraliza"
SC-26-25Soo · copperGrade: 0.98Grade Unit: %Intercept: 16 mView all detailsHide details
Identity
- Hole ID
- SC-26-25
- Project
- Soo
- Commodity
- copper
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- SAG.V
Geometry
- Grade
- 0.98
- Grade Unit
- %
- Intercept
- 16 m
- From
- 252 m
- To
- 268 m
- Hole Depth
- 381.5 m
- Intercept Depth
- 157 m
Classification
- Deposit Type
- porphyry
- Program
- exploration
- Sample Type
- drill
- Group ID
- SC-26-25:252-268
- Mining Method
- open_pit
Location
- Easting
- 680708
- Northing
- 5212608
- Elevation
- 450.21 m
- Azimuth
- 135 °
- Dip
- -60 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- Actlabs
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Metal Eq. Grade
- 0.98
- Metal Eq. Unit
- % CuEq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-16T00:00:00.000Z
Reasoning: This sub-interval from SC-26-25 shows an exceptional copper equivalent grade over a good width, further highlighting the presence of high-grade zones within the porphyry system. The grade is well above the 75th percentile for porphyry copper deposits.
Positive factors
- Exceptional grade for porphyry copper
- Good continuous intercept length
Negative factors
- True width not known
Evidence · table
“0.98”
Context: 16.00
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "Approximately 300 metres west of our initial discovery, we intersected nearly 400 metres of continuous copper mineraliza"
SC-26-26Soo · copperGrade: 0.37Grade Unit: %Intercept: 397.19 mView all detailsHide details
Identity
- Hole ID
- SC-26-26
- Project
- Soo
- Commodity
- copper
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- SAG.V
Geometry
- Grade
- 0.37
- Grade Unit
- %
- Intercept
- 397.19 m
- From
- 8.51 m
- To
- 406.05 m
- Hole Depth
- 406.05 m
- Intercept Depth
- 8.51 m
Classification
- Deposit Type
- porphyry
- Program
- exploration
- Sample Type
- drill
- Group ID
- SC-26-26:8.51-406.05
- Mining Method
- open_pit
Location
- Easting
- 680740
- Northing
- 5212464
- Elevation
- 419 m
- Azimuth
- 75 °
- Dip
- -45 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- Actlabs
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Metal Eq. Grade
- 0.37
- Metal Eq. Unit
- % CuEq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-16T00:00:00.000Z
Reasoning: This very long intercept from SC-26-26, starting from near surface, demonstrates exceptional continuity and scale of mineralization. The grade is strong for a porphyry copper deposit and contributes significantly to the westward extension of the MEPS Copper Zone. The grade is above the 75th percentile for porphyry copper deposits.
Positive factors
- Exceptional continuous intercept length from near surface
- Strong grade for porphyry copper
- Significant step-out extending the mineralized zone
Negative factors
- True width not known
Evidence · table
“0.37”
Context: 397.19
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "Approximately 300 metres west of our initial discovery, we intersected nearly 400 metres of continuous copper mineraliza"
SC-26-26Soo · copperGrade: 0.4Grade Unit: %Intercept: 347.05 mView all detailsHide details
Identity
- Hole ID
- SC-26-26
- Project
- Soo
- Commodity
- copper
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- SAG.V
Geometry
- Grade
- 0.4
- Grade Unit
- %
- Intercept
- 347.05 m
- From
- 59 m
- To
- 406.05 m
- Hole Depth
- 406.05 m
- Intercept Depth
- 8.51 m
Classification
- Deposit Type
- porphyry
- Program
- exploration
- Sample Type
- drill
- Group ID
- SC-26-26:59-406.05
- Mining Method
- open_pit
Location
- Easting
- 680740
- Northing
- 5212464
- Elevation
- 419 m
- Azimuth
- 75 °
- Dip
- -45 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- Actlabs
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Metal Eq. Grade
- 0.4
- Metal Eq. Unit
- % CuEq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-16T00:00:00.000Z
Reasoning: This very long sub-interval from SC-26-26 further highlights the exceptional continuity and scale of mineralization. The grade is strong for a porphyry copper deposit and reinforces the positive implications of the step-out drilling. The grade is above the 75th percentile for porphyry copper deposits.
Positive factors
- Exceptional continuous intercept length
- Strong grade for porphyry copper
- Significant step-out extending the mineralized zone
Negative factors
- True width not known
Evidence · table
“0.40”
Context: 347.05
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "Approximately 300 metres west of our initial discovery, we intersected nearly 400 metres of continuous copper mineraliza"
SC-26-26Soo · copperGrade: 0.53Grade Unit: %Intercept: 200 mView all detailsHide details
Identity
- Hole ID
- SC-26-26
- Project
- Soo
- Commodity
- copper
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- SAG.V
Geometry
- Grade
- 0.53
- Grade Unit
- %
- Intercept
- 200 m
- From
- 148 m
- To
- 348 m
- Hole Depth
- 406.05 m
- Intercept Depth
- 8.51 m
Classification
- Deposit Type
- porphyry
- Program
- exploration
- Sample Type
- drill
- Group ID
- SC-26-26:148-348
- Mining Method
- open_pit
Location
- Easting
- 680740
- Northing
- 5212464
- Elevation
- 419 m
- Azimuth
- 75 °
- Dip
- -45 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- Actlabs
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Metal Eq. Grade
- 0.53
- Metal Eq. Unit
- % CuEq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-16T00:00:00.000Z
Reasoning: This 200m intercept at 0.53% CuEq is exceptional for a porphyry copper deposit, both in terms of width and grade. It significantly contributes to the overall materiality and novelty of the results, confirming the potential for a large-scale, high-grade system. The grade is above the 75th percentile for porphyry copper deposits.
Positive factors
- Exceptional continuous intercept length
- Exceptional grade for porphyry copper
- Significant step-out extending the mineralized zone
Negative factors
- True width not known
Evidence · table
“0.53”
Context: 200.00
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "Approximately 300 metres west of our initial discovery, we intersected nearly 400 metres of continuous copper mineraliza"
SC-26-26Soo · copperGrade: 0.81Grade Unit: %Intercept: 101.9 mView all detailsHide details
Identity
- Hole ID
- SC-26-26
- Project
- Soo
- Commodity
- copper
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- SAG.V
Geometry
- Grade
- 0.81
- Grade Unit
- %
- Intercept
- 101.9 m
- From
- 224.1 m
- To
- 326 m
- Hole Depth
- 406.05 m
- Intercept Depth
- 8.51 m
Classification
- Deposit Type
- porphyry
- Program
- exploration
- Sample Type
- drill
- Group ID
- SC-26-26:224.1-326
- Mining Method
- open_pit
Location
- Easting
- 680740
- Northing
- 5212464
- Elevation
- 419 m
- Azimuth
- 75 °
- Dip
- -45 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- Actlabs
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Metal Eq. Grade
- 0.81
- Metal Eq. Unit
- % CuEq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-16T00:00:00.000Z
Reasoning: This 101.9m intercept at 0.81% CuEq is an exceptional result for a porphyry copper deposit, demonstrating both significant width and high-grade mineralization. It strongly supports the potential for a large and economically viable deposit. The grade is well above the 75th percentile for porphyry copper deposits.
Positive factors
- Exceptional continuous intercept length
- Exceptional grade for porphyry copper
- Significant step-out extending the mineralized zone
Negative factors
- True width not known
Evidence · table
“0.81”
Context: 101.90
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "Approximately 300 metres west of our initial discovery, we intersected nearly 400 metres of continuous copper mineraliza"
SC-26-26Soo · copperGrade: 1.08Grade Unit: %Intercept: 29.9 mView all detailsHide details
Identity
- Hole ID
- SC-26-26
- Project
- Soo
- Commodity
- copper
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- SAG.V
Geometry
- Grade
- 1.08
- Grade Unit
- %
- Intercept
- 29.9 m
- From
- 224.1 m
- To
- 254 m
- Hole Depth
- 406.05 m
- Intercept Depth
- 8.51 m
Classification
- Deposit Type
- porphyry
- Program
- exploration
- Sample Type
- drill
- Group ID
- SC-26-26:224.1-254
- Mining Method
- open_pit
Location
- Easting
- 680740
- Northing
- 5212464
- Elevation
- 419 m
- Azimuth
- 75 °
- Dip
- -45 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- Actlabs
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Metal Eq. Grade
- 1.08
- Metal Eq. Unit
- % CuEq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-16T00:00:00.000Z
Reasoning: This high-grade sub-interval from SC-26-26 is exceptional for a porphyry copper deposit, indicating very strong mineralization within the broader zone. The grade is well above the 75th percentile for porphyry copper deposits.
Positive factors
- Exceptional grade for porphyry copper
- Strong continuous intercept length
Negative factors
- True width not known
Evidence · table
“1.08”
Context: 29.90
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "Approximately 300 metres west of our initial discovery, we intersected nearly 400 metres of continuous copper mineraliza"
SC-26-26Soo · copperGrade: 1.82Grade Unit: %Intercept: 13.25 mView all detailsHide details
Identity
- Hole ID
- SC-26-26
- Project
- Soo
- Commodity
- copper
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- SAG.V
Geometry
- Grade
- 1.82
- Grade Unit
- %
- Intercept
- 13.25 m
- From
- 282 m
- To
- 295.25 m
- Hole Depth
- 406.05 m
- Intercept Depth
- 8.51 m
Classification
- Deposit Type
- porphyry
- Program
- exploration
- Sample Type
- drill
- Group ID
- SC-26-26:282-295.25
- Mining Method
- open_pit
Location
- Easting
- 680740
- Northing
- 5212464
- Elevation
- 419 m
- Azimuth
- 75 °
- Dip
- -45 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- Actlabs
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Metal Eq. Grade
- 1.82
- Metal Eq. Unit
- % CuEq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-16T00:00:00.000Z
Reasoning: This high-grade sub-interval from SC-26-26 is exceptional for a porphyry copper deposit, representing a very strong zone of mineralization within the broader system. The grade is well above the 75th percentile for porphyry copper deposits.
Positive factors
- Exceptional grade for porphyry copper
- Moderate continuous intercept length
Negative factors
- True width not known
Evidence · table
“1.82”
Context: 13.25
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "Approximately 300 metres west of our initial discovery, we intersected nearly 400 metres of continuous copper mineraliza"
SC-26-25Soo · goldGrade: 0.01Grade Unit: g/tIntercept: 128 mView all detailsHide details
Identity
- Hole ID
- SC-26-25
- Project
- Soo
- Commodity
- gold
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- SAG.V
Geometry
- Grade
- 0.01
- Grade Unit
- g/t
- Intercept
- 128 m
- From
- 157 m
- To
- 285 m
- Intercept Depth
- 157 m
Classification
- Deposit Type
- porphyry
- Sample Type
- drill
- Group ID
- SC-26-25:157-285
- Mining Method
- open_pit
QA/QC
- Laboratory
- Actlabs
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Metal Eq. Grade
- 0.31
- Metal Eq. Unit
- % Cu-Eq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-16T00:00:00.000Z
Reasoning: Expanded from assay table. 0.01 g/t gold is below against the porphyry deposit band [1, 0.5, 0.3, 0.15] g/t. Grade×width 1.3 g/t·m is below.
Negative factors
- 0.01 g/t gold is below the weak threshold (0.15 g/t) on the porphyry deposit band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.01”
Context: SC-26-25
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "Approximately 300 metres west of our initial discovery, we intersected nearly 400 metres of continuous copper mineraliza"
SC-26-25Soo · silverGrade: 1.14Grade Unit: g/tIntercept: 128 mView all detailsHide details
Identity
- Hole ID
- SC-26-25
- Project
- Soo
- Commodity
- silver
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- SAG.V
Geometry
- Grade
- 1.14
- Grade Unit
- g/t
- Intercept
- 128 m
- From
- 157 m
- To
- 285 m
- Intercept Depth
- 157 m
Classification
- Deposit Type
- porphyry
- Sample Type
- drill
- Group ID
- SC-26-25:157-285
- Mining Method
- open_pit
QA/QC
- Laboratory
- Actlabs
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Metal Eq. Grade
- 0.31
- Metal Eq. Unit
- % Cu-Eq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-16T00:00:00.000Z
Reasoning: Expanded from assay table. 1.14 g/t silver is below against the default band [500, 200, 100, 30] g/t. Grade×width 145.9 g/t·m is below.
Negative factors
- 1.14 g/t silver is below the weak threshold (30 g/t) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“1.14”
Context: SC-26-25
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "Approximately 300 metres west of our initial discovery, we intersected nearly 400 metres of continuous copper mineraliza"
SC-26-25Soo · molybdenumGrade: 5Grade Unit: ppmIntercept: 128 mView all detailsHide details
Identity
- Hole ID
- SC-26-25
- Project
- Soo
- Commodity
- molybdenum
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- SAG.V
Geometry
- Grade
- 5
- Grade Unit
- ppm
- Intercept
- 128 m
- From
- 157 m
- To
- 285 m
- Intercept Depth
- 157 m
Classification
- Deposit Type
- porphyry
- Sample Type
- drill
- Group ID
- SC-26-25:157-285
- Mining Method
- open_pit
QA/QC
- Laboratory
- Actlabs
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Metal Eq. Grade
- 0.31
- Metal Eq. Unit
- % Cu-Eq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-16T00:00:00.000Z
Reasoning: Expanded from assay table: 5 ppm molybdenum. No grade band defined for this commodity, so the score is a placeholder.
Negative factors
- No grade rubric for molybdenum; intercept not scored.
Evidence · table
“5”
Context: SC-26-25
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "Approximately 300 metres west of our initial discovery, we intersected nearly 400 metres of continuous copper mineraliza"
SC-26-25Soo · goldGrade: 0.02Grade Unit: g/tIntercept: 82 mView all detailsHide details
Identity
- Hole ID
- SC-26-25
- Project
- Soo
- Commodity
- gold
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- SAG.V
Geometry
- Grade
- 0.02
- Grade Unit
- g/t
- Intercept
- 82 m
- From
- 198 m
- To
- 280 m
- Intercept Depth
- 198 m
Classification
- Deposit Type
- porphyry
- Sample Type
- drill
- Group ID
- SC-26-25:198-280
- Mining Method
- open_pit
QA/QC
- Laboratory
- Actlabs
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Metal Eq. Grade
- 0.4
- Metal Eq. Unit
- % Cu-Eq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-16T00:00:00.000Z
Reasoning: Expanded from assay table. 0.02 g/t gold is below against the porphyry deposit band [1, 0.5, 0.3, 0.15] g/t. Grade×width 1.6 g/t·m is below.
Negative factors
- 0.02 g/t gold is below the weak threshold (0.15 g/t) on the porphyry deposit band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.02”
Context: including
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "Approximately 300 metres west of our initial discovery, we intersected nearly 400 metres of continuous copper mineraliza"
SC-26-25Soo · silverGrade: 1.26Grade Unit: g/tIntercept: 82 mView all detailsHide details
Identity
- Hole ID
- SC-26-25
- Project
- Soo
- Commodity
- silver
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- SAG.V
Geometry
- Grade
- 1.26
- Grade Unit
- g/t
- Intercept
- 82 m
- From
- 198 m
- To
- 280 m
- Intercept Depth
- 198 m
Classification
- Deposit Type
- porphyry
- Sample Type
- drill
- Group ID
- SC-26-25:198-280
- Mining Method
- open_pit
QA/QC
- Laboratory
- Actlabs
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Metal Eq. Grade
- 0.4
- Metal Eq. Unit
- % Cu-Eq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-16T00:00:00.000Z
Reasoning: Expanded from assay table. 1.26 g/t silver is below against the default band [500, 200, 100, 30] g/t. Grade×width 103.3 g/t·m is below.
Negative factors
- 1.26 g/t silver is below the weak threshold (30 g/t) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“1.26”
Context: including
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "Approximately 300 metres west of our initial discovery, we intersected nearly 400 metres of continuous copper mineraliza"
SC-26-25Soo · molybdenumGrade: 6Grade Unit: ppmIntercept: 82 mView all detailsHide details
Identity
- Hole ID
- SC-26-25
- Project
- Soo
- Commodity
- molybdenum
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- SAG.V
Geometry
- Grade
- 6
- Grade Unit
- ppm
- Intercept
- 82 m
- From
- 198 m
- To
- 280 m
- Intercept Depth
- 198 m
Classification
- Deposit Type
- porphyry
- Sample Type
- drill
- Group ID
- SC-26-25:198-280
- Mining Method
- open_pit
QA/QC
- Laboratory
- Actlabs
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Metal Eq. Grade
- 0.4
- Metal Eq. Unit
- % Cu-Eq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-16T00:00:00.000Z
Reasoning: Expanded from assay table: 6 ppm molybdenum. No grade band defined for this commodity, so the score is a placeholder.
Negative factors
- No grade rubric for molybdenum; intercept not scored.
Evidence · table
“6”
Context: including
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "Approximately 300 metres west of our initial discovery, we intersected nearly 400 metres of continuous copper mineraliza"
SC-26-25Soo · goldGrade: 0.03Grade Unit: g/tIntercept: 24 mView all detailsHide details
Identity
- Hole ID
- SC-26-25
- Project
- Soo
- Commodity
- gold
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- SAG.V
Geometry
- Grade
- 0.03
- Grade Unit
- g/t
- Intercept
- 24 m
- From
- 244 m
- To
- 268 m
- Intercept Depth
- 244 m
Classification
- Deposit Type
- porphyry
- Sample Type
- drill
- Group ID
- SC-26-25:244-268
- Mining Method
- open_pit
QA/QC
- Laboratory
- Actlabs
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Metal Eq. Grade
- 0.86
- Metal Eq. Unit
- % Cu-Eq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-16T00:00:00.000Z
Reasoning: Expanded from assay table. 0.03 g/t gold is below against the porphyry deposit band [1, 0.5, 0.3, 0.15] g/t. Grade×width 0.7 g/t·m is below.
Negative factors
- 0.03 g/t gold is below the weak threshold (0.15 g/t) on the porphyry deposit band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.03”
Context: including
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "Approximately 300 metres west of our initial discovery, we intersected nearly 400 metres of continuous copper mineraliza"
SC-26-25Soo · silverGrade: 2.29Grade Unit: g/tIntercept: 24 mView all detailsHide details
Identity
- Hole ID
- SC-26-25
- Project
- Soo
- Commodity
- silver
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- SAG.V
Geometry
- Grade
- 2.29
- Grade Unit
- g/t
- Intercept
- 24 m
- From
- 244 m
- To
- 268 m
- Intercept Depth
- 244 m
Classification
- Deposit Type
- porphyry
- Sample Type
- drill
- Group ID
- SC-26-25:244-268
- Mining Method
- open_pit
QA/QC
- Laboratory
- Actlabs
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Metal Eq. Grade
- 0.86
- Metal Eq. Unit
- % Cu-Eq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-16T00:00:00.000Z
Reasoning: Expanded from assay table. 2.29 g/t silver is below against the default band [500, 200, 100, 30] g/t. Grade×width 55.0 g/t·m is below.
Negative factors
- 2.29 g/t silver is below the weak threshold (30 g/t) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“2.29”
Context: including
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "Approximately 300 metres west of our initial discovery, we intersected nearly 400 metres of continuous copper mineraliza"
SC-26-25Soo · molybdenumGrade: 9Grade Unit: ppmIntercept: 24 mView all detailsHide details
Identity
- Hole ID
- SC-26-25
- Project
- Soo
- Commodity
- molybdenum
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- SAG.V
Geometry
- Grade
- 9
- Grade Unit
- ppm
- Intercept
- 24 m
- From
- 244 m
- To
- 268 m
- Intercept Depth
- 244 m
Classification
- Deposit Type
- porphyry
- Sample Type
- drill
- Group ID
- SC-26-25:244-268
- Mining Method
- open_pit
QA/QC
- Laboratory
- Actlabs
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Metal Eq. Grade
- 0.86
- Metal Eq. Unit
- % Cu-Eq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-16T00:00:00.000Z
Reasoning: Expanded from assay table: 9 ppm molybdenum. No grade band defined for this commodity, so the score is a placeholder.
Negative factors
- No grade rubric for molybdenum; intercept not scored.
Evidence · table
“9”
Context: including
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "Approximately 300 metres west of our initial discovery, we intersected nearly 400 metres of continuous copper mineraliza"
SC-26-25Soo · goldGrade: 0.03Grade Unit: g/tIntercept: 16 mView all detailsHide details
Identity
- Hole ID
- SC-26-25
- Project
- Soo
- Commodity
- gold
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- SAG.V
Geometry
- Grade
- 0.03
- Grade Unit
- g/t
- Intercept
- 16 m
- From
- 252 m
- To
- 268 m
- Intercept Depth
- 252 m
Classification
- Deposit Type
- porphyry
- Sample Type
- drill
- Group ID
- SC-26-25:252-268
- Mining Method
- open_pit
QA/QC
- Laboratory
- Actlabs
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Metal Eq. Grade
- 0.98
- Metal Eq. Unit
- % Cu-Eq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-16T00:00:00.000Z
Reasoning: Expanded from assay table. 0.03 g/t gold is below against the porphyry deposit band [1, 0.5, 0.3, 0.15] g/t. Grade×width 0.5 g/t·m is below.
Negative factors
- 0.03 g/t gold is below the weak threshold (0.15 g/t) on the porphyry deposit band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.03”
Context: including
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "Approximately 300 metres west of our initial discovery, we intersected nearly 400 metres of continuous copper mineraliza"
SC-26-25Soo · silverGrade: 2.73Grade Unit: g/tIntercept: 16 mView all detailsHide details
Identity
- Hole ID
- SC-26-25
- Project
- Soo
- Commodity
- silver
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- SAG.V
Geometry
- Grade
- 2.73
- Grade Unit
- g/t
- Intercept
- 16 m
- From
- 252 m
- To
- 268 m
- Intercept Depth
- 252 m
Classification
- Deposit Type
- porphyry
- Sample Type
- drill
- Group ID
- SC-26-25:252-268
- Mining Method
- open_pit
QA/QC
- Laboratory
- Actlabs
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Metal Eq. Grade
- 0.98
- Metal Eq. Unit
- % Cu-Eq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-16T00:00:00.000Z
Reasoning: Expanded from assay table. 2.73 g/t silver is below against the default band [500, 200, 100, 30] g/t. Grade×width 43.7 g/t·m is below.
Negative factors
- 2.73 g/t silver is below the weak threshold (30 g/t) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“2.73”
Context: including
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "Approximately 300 metres west of our initial discovery, we intersected nearly 400 metres of continuous copper mineraliza"
SC-26-25Soo · molybdenumGrade: 6Grade Unit: ppmIntercept: 16 mView all detailsHide details
Identity
- Hole ID
- SC-26-25
- Project
- Soo
- Commodity
- molybdenum
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- SAG.V
Geometry
- Grade
- 6
- Grade Unit
- ppm
- Intercept
- 16 m
- From
- 252 m
- To
- 268 m
- Intercept Depth
- 252 m
Classification
- Deposit Type
- porphyry
- Sample Type
- drill
- Group ID
- SC-26-25:252-268
- Mining Method
- open_pit
QA/QC
- Laboratory
- Actlabs
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Metal Eq. Grade
- 0.98
- Metal Eq. Unit
- % Cu-Eq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-16T00:00:00.000Z
Reasoning: Expanded from assay table: 6 ppm molybdenum. No grade band defined for this commodity, so the score is a placeholder.
Negative factors
- No grade rubric for molybdenum; intercept not scored.
Evidence · table
“6”
Context: including
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "Approximately 300 metres west of our initial discovery, we intersected nearly 400 metres of continuous copper mineraliza"
SC-26-26Soo · goldGrade: 0.03Grade Unit: g/tIntercept: 397.19 mView all detailsHide details
Identity
- Hole ID
- SC-26-26
- Project
- Soo
- Commodity
- gold
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- SAG.V
Geometry
- Grade
- 0.03
- Grade Unit
- g/t
- Intercept
- 397.19 m
- From
- 8.51 m
- To
- 406.05 m
- Intercept Depth
- 8.51 m
Classification
- Deposit Type
- porphyry
- Sample Type
- drill
- Group ID
- SC-26-26:8.51-406.05
- Mining Method
- open_pit
QA/QC
- Laboratory
- Actlabs
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Metal Eq. Grade
- 0.37
- Metal Eq. Unit
- % Cu-Eq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-16T00:00:00.000Z
Reasoning: Expanded from assay table. 0.03 g/t gold is weak against the porphyry deposit band [1, 0.5, 0.3, 0.15] g/t. Grade×width 11.9 g/t·m is weak (grade alone is below; the better of the two is used).
Negative factors
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.03”
Context: SC-26-26
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "Approximately 300 metres west of our initial discovery, we intersected nearly 400 metres of continuous copper mineraliza"
SC-26-26Soo · silverGrade: 1.07Grade Unit: g/tIntercept: 397.19 mView all detailsHide details
Identity
- Hole ID
- SC-26-26
- Project
- Soo
- Commodity
- silver
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- SAG.V
Geometry
- Grade
- 1.07
- Grade Unit
- g/t
- Intercept
- 397.19 m
- From
- 8.51 m
- To
- 406.05 m
- Intercept Depth
- 8.51 m
Classification
- Deposit Type
- porphyry
- Sample Type
- drill
- Group ID
- SC-26-26:8.51-406.05
- Mining Method
- open_pit
QA/QC
- Laboratory
- Actlabs
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Metal Eq. Grade
- 0.37
- Metal Eq. Unit
- % Cu-Eq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-16T00:00:00.000Z
Reasoning: Expanded from assay table. 1.07 g/t silver is weak against the default band [500, 200, 100, 30] g/t. Grade×width 425.0 g/t·m is weak (grade alone is below; the better of the two is used).
Negative factors
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“1.07”
Context: SC-26-26
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "Approximately 300 metres west of our initial discovery, we intersected nearly 400 metres of continuous copper mineraliza"
SC-26-26Soo · molybdenumGrade: 63Grade Unit: ppmIntercept: 397.19 mView all detailsHide details
Identity
- Hole ID
- SC-26-26
- Project
- Soo
- Commodity
- molybdenum
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- SAG.V
Geometry
- Grade
- 63
- Grade Unit
- ppm
- Intercept
- 397.19 m
- From
- 8.51 m
- To
- 406.05 m
- Intercept Depth
- 8.51 m
Classification
- Deposit Type
- porphyry
- Sample Type
- drill
- Group ID
- SC-26-26:8.51-406.05
- Mining Method
- open_pit
QA/QC
- Laboratory
- Actlabs
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Metal Eq. Grade
- 0.37
- Metal Eq. Unit
- % Cu-Eq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-16T00:00:00.000Z
Reasoning: Expanded from assay table: 63 ppm molybdenum. No grade band defined for this commodity, so the score is a placeholder.
Negative factors
- No grade rubric for molybdenum; intercept not scored.
Evidence · table
“63”
Context: SC-26-26
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "Approximately 300 metres west of our initial discovery, we intersected nearly 400 metres of continuous copper mineraliza"
SC-26-26Soo · goldGrade: 0.03Grade Unit: g/tIntercept: 347.05 mView all detailsHide details
Identity
- Hole ID
- SC-26-26
- Project
- Soo
- Commodity
- gold
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- SAG.V
Geometry
- Grade
- 0.03
- Grade Unit
- g/t
- Intercept
- 347.05 m
- From
- 59 m
- To
- 406.05 m
- Intercept Depth
- 59 m
Classification
- Deposit Type
- porphyry
- Sample Type
- drill
- Group ID
- SC-26-26:59-406.05
- Mining Method
- open_pit
QA/QC
- Laboratory
- Actlabs
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Metal Eq. Grade
- 0.4
- Metal Eq. Unit
- % Cu-Eq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-16T00:00:00.000Z
Reasoning: Expanded from assay table. 0.03 g/t gold is weak against the porphyry deposit band [1, 0.5, 0.3, 0.15] g/t. Grade×width 10.4 g/t·m is weak (grade alone is below; the better of the two is used).
Negative factors
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.03”
Context: including
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "Approximately 300 metres west of our initial discovery, we intersected nearly 400 metres of continuous copper mineraliza"
SC-26-26Soo · silverGrade: 1.15Grade Unit: g/tIntercept: 347.05 mView all detailsHide details
Identity
- Hole ID
- SC-26-26
- Project
- Soo
- Commodity
- silver
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- SAG.V
Geometry
- Grade
- 1.15
- Grade Unit
- g/t
- Intercept
- 347.05 m
- From
- 59 m
- To
- 406.05 m
- Intercept Depth
- 59 m
Classification
- Deposit Type
- porphyry
- Sample Type
- drill
- Group ID
- SC-26-26:59-406.05
- Mining Method
- open_pit
QA/QC
- Laboratory
- Actlabs
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Metal Eq. Grade
- 0.4
- Metal Eq. Unit
- % Cu-Eq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-16T00:00:00.000Z
Reasoning: Expanded from assay table. 1.15 g/t silver is weak against the default band [500, 200, 100, 30] g/t. Grade×width 399.1 g/t·m is weak (grade alone is below; the better of the two is used).
Negative factors
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“1.15”
Context: including
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "Approximately 300 metres west of our initial discovery, we intersected nearly 400 metres of continuous copper mineraliza"
SC-26-26Soo · molybdenumGrade: 72Grade Unit: ppmIntercept: 347.05 mView all detailsHide details
Identity
- Hole ID
- SC-26-26
- Project
- Soo
- Commodity
- molybdenum
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- SAG.V
Geometry
- Grade
- 72
- Grade Unit
- ppm
- Intercept
- 347.05 m
- From
- 59 m
- To
- 406.05 m
- Intercept Depth
- 59 m
Classification
- Deposit Type
- porphyry
- Sample Type
- drill
- Group ID
- SC-26-26:59-406.05
- Mining Method
- open_pit
QA/QC
- Laboratory
- Actlabs
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Metal Eq. Grade
- 0.4
- Metal Eq. Unit
- % Cu-Eq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-16T00:00:00.000Z
Reasoning: Expanded from assay table: 72 ppm molybdenum. No grade band defined for this commodity, so the score is a placeholder.
Negative factors
- No grade rubric for molybdenum; intercept not scored.
Evidence · table
“72”
Context: including
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "Approximately 300 metres west of our initial discovery, we intersected nearly 400 metres of continuous copper mineraliza"
SC-26-26Soo · goldGrade: 0.04Grade Unit: g/tIntercept: 200 mView all detailsHide details
Identity
- Hole ID
- SC-26-26
- Project
- Soo
- Commodity
- gold
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- SAG.V
Geometry
- Grade
- 0.04
- Grade Unit
- g/t
- Intercept
- 200 m
- From
- 148 m
- To
- 348 m
- Intercept Depth
- 148 m
Classification
- Deposit Type
- porphyry
- Sample Type
- drill
- Group ID
- SC-26-26:148-348
- Mining Method
- open_pit
QA/QC
- Laboratory
- Actlabs
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Metal Eq. Grade
- 0.53
- Metal Eq. Unit
- % Cu-Eq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-16T00:00:00.000Z
Reasoning: Expanded from assay table. 0.04 g/t gold is below against the porphyry deposit band [1, 0.5, 0.3, 0.15] g/t. Grade×width 8.0 g/t·m is below.
Negative factors
- 0.04 g/t gold is below the weak threshold (0.15 g/t) on the porphyry deposit band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.04”
Context: including
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "Approximately 300 metres west of our initial discovery, we intersected nearly 400 metres of continuous copper mineraliza"
SC-26-26Soo · silverGrade: 1.42Grade Unit: g/tIntercept: 200 mView all detailsHide details
Identity
- Hole ID
- SC-26-26
- Project
- Soo
- Commodity
- silver
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- SAG.V
Geometry
- Grade
- 1.42
- Grade Unit
- g/t
- Intercept
- 200 m
- From
- 148 m
- To
- 348 m
- Intercept Depth
- 148 m
Classification
- Deposit Type
- porphyry
- Sample Type
- drill
- Group ID
- SC-26-26:148-348
- Mining Method
- open_pit
QA/QC
- Laboratory
- Actlabs
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Metal Eq. Grade
- 0.53
- Metal Eq. Unit
- % Cu-Eq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-16T00:00:00.000Z
Reasoning: Expanded from assay table. 1.42 g/t silver is weak against the default band [500, 200, 100, 30] g/t. Grade×width 284.0 g/t·m is weak (grade alone is below; the better of the two is used).
Negative factors
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“1.42”
Context: including
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "Approximately 300 metres west of our initial discovery, we intersected nearly 400 metres of continuous copper mineraliza"
SC-26-26Soo · molybdenumGrade: 94Grade Unit: ppmIntercept: 200 mView all detailsHide details
Identity
- Hole ID
- SC-26-26
- Project
- Soo
- Commodity
- molybdenum
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- SAG.V
Geometry
- Grade
- 94
- Grade Unit
- ppm
- Intercept
- 200 m
- From
- 148 m
- To
- 348 m
- Intercept Depth
- 148 m
Classification
- Deposit Type
- porphyry
- Sample Type
- drill
- Group ID
- SC-26-26:148-348
- Mining Method
- open_pit
QA/QC
- Laboratory
- Actlabs
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Metal Eq. Grade
- 0.53
- Metal Eq. Unit
- % Cu-Eq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-16T00:00:00.000Z
Reasoning: Expanded from assay table: 94 ppm molybdenum. No grade band defined for this commodity, so the score is a placeholder.
Negative factors
- No grade rubric for molybdenum; intercept not scored.
Evidence · table
“94”
Context: including
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "Approximately 300 metres west of our initial discovery, we intersected nearly 400 metres of continuous copper mineraliza"
SC-26-26Soo · goldGrade: 0.07Grade Unit: g/tIntercept: 101.9 mView all detailsHide details
Identity
- Hole ID
- SC-26-26
- Project
- Soo
- Commodity
- gold
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- SAG.V
Geometry
- Grade
- 0.07
- Grade Unit
- g/t
- Intercept
- 101.9 m
- From
- 224.1 m
- To
- 326 m
- Intercept Depth
- 224.1 m
Classification
- Deposit Type
- porphyry
- Sample Type
- drill
- Group ID
- SC-26-26:224.1-326
- Mining Method
- open_pit
QA/QC
- Laboratory
- Actlabs
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Metal Eq. Grade
- 0.81
- Metal Eq. Unit
- % Cu-Eq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-16T00:00:00.000Z
Reasoning: Expanded from assay table. 0.07 g/t gold is below against the porphyry deposit band [1, 0.5, 0.3, 0.15] g/t. Grade×width 7.1 g/t·m is below.
Negative factors
- 0.07 g/t gold is below the weak threshold (0.15 g/t) on the porphyry deposit band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.07”
Context: Including
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "Approximately 300 metres west of our initial discovery, we intersected nearly 400 metres of continuous copper mineraliza"
SC-26-26Soo · silverGrade: 2.19Grade Unit: g/tIntercept: 101.9 mView all detailsHide details
Identity
- Hole ID
- SC-26-26
- Project
- Soo
- Commodity
- silver
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- SAG.V
Geometry
- Grade
- 2.19
- Grade Unit
- g/t
- Intercept
- 101.9 m
- From
- 224.1 m
- To
- 326 m
- Intercept Depth
- 224.1 m
Classification
- Deposit Type
- porphyry
- Sample Type
- drill
- Group ID
- SC-26-26:224.1-326
- Mining Method
- open_pit
QA/QC
- Laboratory
- Actlabs
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Metal Eq. Grade
- 0.81
- Metal Eq. Unit
- % Cu-Eq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-16T00:00:00.000Z
Reasoning: Expanded from assay table. 2.19 g/t silver is weak against the default band [500, 200, 100, 30] g/t. Grade×width 223.2 g/t·m is weak (grade alone is below; the better of the two is used).
Negative factors
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“2.19”
Context: Including
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "Approximately 300 metres west of our initial discovery, we intersected nearly 400 metres of continuous copper mineraliza"
SC-26-26Soo · molybdenumGrade: 152Grade Unit: ppmIntercept: 101.9 mView all detailsHide details
Identity
- Hole ID
- SC-26-26
- Project
- Soo
- Commodity
- molybdenum
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- SAG.V
Geometry
- Grade
- 152
- Grade Unit
- ppm
- Intercept
- 101.9 m
- From
- 224.1 m
- To
- 326 m
- Intercept Depth
- 224.1 m
Classification
- Deposit Type
- porphyry
- Sample Type
- drill
- Group ID
- SC-26-26:224.1-326
- Mining Method
- open_pit
QA/QC
- Laboratory
- Actlabs
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Metal Eq. Grade
- 0.81
- Metal Eq. Unit
- % Cu-Eq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-16T00:00:00.000Z
Reasoning: Expanded from assay table: 152 ppm molybdenum. No grade band defined for this commodity, so the score is a placeholder.
Negative factors
- No grade rubric for molybdenum; intercept not scored.
Evidence · table
“152”
Context: Including
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "Approximately 300 metres west of our initial discovery, we intersected nearly 400 metres of continuous copper mineraliza"
SC-26-26Soo · goldGrade: 0.04Grade Unit: g/tIntercept: 29.9 mView all detailsHide details
Identity
- Hole ID
- SC-26-26
- Project
- Soo
- Commodity
- gold
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- SAG.V
Geometry
- Grade
- 0.04
- Grade Unit
- g/t
- Intercept
- 29.9 m
- From
- 224.1 m
- To
- 254 m
- Intercept Depth
- 224.1 m
Classification
- Deposit Type
- porphyry
- Sample Type
- drill
- Group ID
- SC-26-26:224.1-254
- Mining Method
- open_pit
QA/QC
- Laboratory
- Actlabs
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Metal Eq. Grade
- 1.08
- Metal Eq. Unit
- % Cu-Eq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-16T00:00:00.000Z
Reasoning: Expanded from assay table. 0.04 g/t gold is below against the porphyry deposit band [1, 0.5, 0.3, 0.15] g/t. Grade×width 1.2 g/t·m is below.
Negative factors
- 0.04 g/t gold is below the weak threshold (0.15 g/t) on the porphyry deposit band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.04”
Context: including
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "Approximately 300 metres west of our initial discovery, we intersected nearly 400 metres of continuous copper mineraliza"
SC-26-26Soo · silverGrade: 1.69Grade Unit: g/tIntercept: 29.9 mView all detailsHide details
Identity
- Hole ID
- SC-26-26
- Project
- Soo
- Commodity
- silver
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- SAG.V
Geometry
- Grade
- 1.69
- Grade Unit
- g/t
- Intercept
- 29.9 m
- From
- 224.1 m
- To
- 254 m
- Intercept Depth
- 224.1 m
Classification
- Deposit Type
- porphyry
- Sample Type
- drill
- Group ID
- SC-26-26:224.1-254
- Mining Method
- open_pit
QA/QC
- Laboratory
- Actlabs
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Metal Eq. Grade
- 1.08
- Metal Eq. Unit
- % Cu-Eq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-16T00:00:00.000Z
Reasoning: Expanded from assay table. 1.69 g/t silver is below against the default band [500, 200, 100, 30] g/t. Grade×width 50.5 g/t·m is below.
Negative factors
- 1.69 g/t silver is below the weak threshold (30 g/t) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“1.69”
Context: including
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "Approximately 300 metres west of our initial discovery, we intersected nearly 400 metres of continuous copper mineraliza"
SC-26-26Soo · molybdenumGrade: 96Grade Unit: ppmIntercept: 29.9 mView all detailsHide details
Identity
- Hole ID
- SC-26-26
- Project
- Soo
- Commodity
- molybdenum
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- SAG.V
Geometry
- Grade
- 96
- Grade Unit
- ppm
- Intercept
- 29.9 m
- From
- 224.1 m
- To
- 254 m
- Intercept Depth
- 224.1 m
Classification
- Deposit Type
- porphyry
- Sample Type
- drill
- Group ID
- SC-26-26:224.1-254
- Mining Method
- open_pit
QA/QC
- Laboratory
- Actlabs
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Metal Eq. Grade
- 1.08
- Metal Eq. Unit
- % Cu-Eq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-16T00:00:00.000Z
Reasoning: Expanded from assay table: 96 ppm molybdenum. No grade band defined for this commodity, so the score is a placeholder.
Negative factors
- No grade rubric for molybdenum; intercept not scored.
Evidence · table
“96”
Context: including
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "Approximately 300 metres west of our initial discovery, we intersected nearly 400 metres of continuous copper mineraliza"
andSoo · copperGrade: 1.03Grade Unit: %Intercept: 13.25 mView all detailsHide details
Identity
- Hole ID
- and
- Project
- Soo
- Commodity
- copper
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- SAG.V
Geometry
- Grade
- 1.03
- Grade Unit
- %
- Intercept
- 13.25 m
- From
- 282 m
- To
- 295.25 m
- Intercept Depth
- 282 m
Classification
- Deposit Type
- porphyry
- Sample Type
- drill
- Group ID
- and:282-295.25
- Mining Method
- open_pit
QA/QC
- Laboratory
- Actlabs
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Metal Eq. Grade
- 1.82
- Metal Eq. Unit
- % Cu-Eq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-16T00:00:00.000Z
Reasoning: Expanded from assay table. 1.03 % copper is exceptional against the porphyry deposit band [0.8, 0.4, 0.25, 0.15] %. Grade×width 13.6 %·m is below (grade alone is exceptional; the better of the two is used).
Positive factors
- 1.03 % copper is exceptional on the porphyry deposit band.
Negative factors
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“1.03”
Context: and
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "Approximately 300 metres west of our initial discovery, we intersected nearly 400 metres of continuous copper mineraliza"
andSoo · goldGrade: 0.3Grade Unit: g/tIntercept: 13.25 mView all detailsHide details
Identity
- Hole ID
- and
- Project
- Soo
- Commodity
- gold
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- SAG.V
Geometry
- Grade
- 0.3
- Grade Unit
- g/t
- Intercept
- 13.25 m
- From
- 282 m
- To
- 295.25 m
- Intercept Depth
- 282 m
Classification
- Deposit Type
- porphyry
- Sample Type
- drill
- Group ID
- and:282-295.25
- Mining Method
- open_pit
QA/QC
- Laboratory
- Actlabs
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Metal Eq. Grade
- 1.82
- Metal Eq. Unit
- % Cu-Eq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-16T00:00:00.000Z
Reasoning: Expanded from assay table. 0.3 g/t gold is moderate against the porphyry deposit band [1, 0.5, 0.3, 0.15] g/t. Grade×width 4.0 g/t·m is below (grade alone is moderate; the better of the two is used).
Negative factors
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.30”
Context: and
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "Approximately 300 metres west of our initial discovery, we intersected nearly 400 metres of continuous copper mineraliza"
andSoo · silverGrade: 7.6Grade Unit: g/tIntercept: 13.25 mView all detailsHide details
Identity
- Hole ID
- and
- Project
- Soo
- Commodity
- silver
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- SAG.V
Geometry
- Grade
- 7.6
- Grade Unit
- g/t
- Intercept
- 13.25 m
- From
- 282 m
- To
- 295.25 m
- Intercept Depth
- 282 m
Classification
- Deposit Type
- porphyry
- Sample Type
- drill
- Group ID
- and:282-295.25
- Mining Method
- open_pit
QA/QC
- Laboratory
- Actlabs
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Metal Eq. Grade
- 1.82
- Metal Eq. Unit
- % Cu-Eq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-16T00:00:00.000Z
Reasoning: Expanded from assay table. 7.6 g/t silver is below against the default band [500, 200, 100, 30] g/t. Grade×width 100.7 g/t·m is below.
Negative factors
- 7.6 g/t silver is below the weak threshold (30 g/t) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“7.60”
Context: and
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "Approximately 300 metres west of our initial discovery, we intersected nearly 400 metres of continuous copper mineraliza"
andSoo · molybdenumGrade: 837Grade Unit: ppmIntercept: 13.25 mView all detailsHide details
Identity
- Hole ID
- and
- Project
- Soo
- Commodity
- molybdenum
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- SAG.V
Geometry
- Grade
- 837
- Grade Unit
- ppm
- Intercept
- 13.25 m
- From
- 282 m
- To
- 295.25 m
- Intercept Depth
- 282 m
Classification
- Deposit Type
- porphyry
- Sample Type
- drill
- Group ID
- and:282-295.25
- Mining Method
- open_pit
QA/QC
- Laboratory
- Actlabs
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Metal Eq. Grade
- 1.82
- Metal Eq. Unit
- % Cu-Eq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-16T00:00:00.000Z
Reasoning: Expanded from assay table: 837 ppm molybdenum. No grade band defined for this commodity, so the score is a placeholder.
Negative factors
- No grade rubric for molybdenum; intercept not scored.
Evidence · table
“837”
Context: and
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "Approximately 300 metres west of our initial discovery, we intersected nearly 400 metres of continuous copper mineraliza"
SC-26-25SooIntercept: 0.35 mView all detailsHide details
Identity
- Hole ID
- SC-26-25
- Project
- Soo
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- SAG.V
Geometry
- Intercept
- 0.35 m
- Hole Depth
- 381.5 m
Classification
- Deposit Type
- porphyry
- Sample Type
- drill
Location
- Azimuth
- 135 °
- Dip
- -60 °
QA/QC
- Laboratory
- Actlabs
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Metal Eq. Grade
- 2.71
- Metal Eq. Unit
- % CuEq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-16T00:00:00.000Z
Reasoning: This intercept from SC-26-25 shows a good continuous length with a strong copper equivalent grade for a porphyry deposit, contributing to the overall extension of the mineralized zone. The grade is above the 75th percentile for porphyry copper deposits.
Positive factors
- Continuous intercept length
- Strong grade for porphyry copper
- Part of a significant step-out program
Negative factors
- True width not known
Evidence · text
“2.71% CuEq over 0.35m”
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "Approximately 300 metres west of our initial discovery, we intersected nearly 400 metres of continuous copper mineraliza"
How Atlas produces this analysis
Minestarters Atlas uses automated extraction to summarize mining announcements, identify reported measurements, and classify supporting evidence. Sentiment reflects the extracted narrative and classification rules; it is an interpretation, not a reported measurement. Evidence quotes and context are provided where available. Missing data, low-confidence results, and review flags indicate limitations. Check the original publisher announcement before relying on an interpretation.