SNM: Northern drilling extends mineralisation beyond current MRE
Original announcement by asx on
- Company
- Sentinel Metals Limited
- Ticker
- SNM
- Exchange
- ASX
- Region
- Montana, USA
- Primary commodity
- Gold
- Secondary commodities
- Silver
- Document categories
- Drill results, Resource update
- Extracted
- 2026-10-12 23:13:53 UTC
Analysis by Minestarters Atlas
Atlas analysis published:
Minestarters Atlas analysis
Summary
Sentinel Metals Limited has reported additional drill results from its 2026 program at the Columbia Gold-Silver Project in Montana, USA, confirming broad gold mineralization and extending it beyond the current Mineral Resource pit shell. Notable intercepts include 21.7m at 2.19g/t Au from DDCO26-011 and 9.1m at 2.56g/t Au from DDCO26-010, with some mineralization lying outside the existing pit shell. These results, along with pending assays for the final four holes, will be incorporated into an updated Mineral Resource Estimate in November 2026.
Reasoning: New drill results from the Columbia Gold-Silver Project confirm broad, shallow gold mineralization and extend it beyond the current pit shell, including bonanza grades. These results will feed into an updated MRE, indicating significant potential for resource growth. QA/QC procedures are well-documented, but assays are preliminary and true widths are not yet determined.
Positive factors
- step_out_extension
- broad_intercepts
- high_grade_intercepts
- qaqc_disclosed
- jorc_compliant
Negative factors
- apparent_width_only
- preliminary_assays
- some_low_core_recovery
Low confidence — this extraction should be reviewed alongside the original source.
Facts used in scoring: 47
Classification and evidence
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: Release includes QA/QC disclosure with certified reference materials, blanks, and duplicates, and a Competent Person sign-off.
Evidence · text
“Certified reference materials (OREAS 60e, 62h and 600c), coarse quartz blanks (submitted as 500g bags) and duplicates (quarter-core field duplicates, crushed-sample duplicates and pulp duplicates) were inserted at a combined rate of approximately one QAQC sample for every four primary samples (258 QAQC samples against 1,049 primary samples).”
Cut-off Disclosedpositive
Cut-off grade used for resource reporting is clearly stated, enabling like-for-like comparison.
Why it applies: Cut-off grade used for interval reporting (0.3g/t Au) and internal dilution rules (up to 3m) are clearly stated.
Evidence · text
“Significant intercepts for reported gold assays are calculated at a 0.3g/t Au lower cut-off and may include up to 3m of internal dilution”
Apparent Width Onlynegative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Why it applies: Intervals are given as downhole widths with no true width or drill orientation stated.
Evidence · text
“Intervals are downhole lengths; true widths have not yet been determined.”
Extracted facts
Stored fact records: 47. Some facts used in scoring do not have a stored record.
Drill Results (47)
DDCO26-005Columbia · goldGrade: 1.56Grade Unit: g/tIntercept: 3.18 mView all detailsHide details
Identity
- Hole ID
- DDCO26-005
- Project
- Columbia
- Commodity
- gold
- Region
- usa_mt
- Reported Region
- usa_mt
- Ticker
- SNM
Geometry
- Grade
- 1.56
- Grade Unit
- g/t
- Intercept
- 3.18 m
- From
- 6.42 m
- To
- 9.6 m
- Hole Depth
- 198 m
- Intercept Depth
- 6.42 m
Classification
- Deposit Type
- epithermal
- Program
- mixed
- Sample Type
- drill
- Group ID
- DDCO26-005:6.42-9.6
- Mining Method
- open_pit
Location
- Easting
- 384760.2
- Northing
- 5199503.1
- CRS
- NAD83 / UTM Zone 12N
- Elevation
- 1863.2 m
- Azimuth
- 121 °
- Dip
- -70 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- AGAT Laboratories
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Deleterious
- Deleterious Flag
- No
Compositing
- Cutoff Grade
- 0.3
- Cutoff Unit
- g/t Au
- Dilution Disclosed
- Yes
- Max Dilution
- 3 m
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-10-12T00:00:00.000Z
Reasoning: Moderate grade gold intercept, but true width not determined.
Positive factors
- moderate_grade
Negative factors
- apparent_width_only
Evidence · table
“1.56”
Context: 3.18
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Compositing Transparentpositive
Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Why it applies: cutoff_grade and internal dilution are both stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
Rejected tags
Rejected tags — excluded from scoring because their label or evidence could not be verified.
Apparent Width OnlyRejected · negative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Reason: Interval given as downhole width with no true width or drill orientation.
Evidence · text
“Intervals are downhole lengths; true widths have not yet been determined.”
DDCO26-005Columbia · goldGrade: 3.64Grade Unit: g/tIntercept: 1.18 mView all detailsHide details
Identity
- Hole ID
- DDCO26-005
- Project
- Columbia
- Commodity
- gold
- Region
- usa_mt
- Reported Region
- usa_mt
- Ticker
- SNM
Geometry
- Grade
- 3.64
- Grade Unit
- g/t
- Intercept
- 1.18 m
- From
- 6.42 m
- To
- 7.6 m
- Hole Depth
- 198 m
- Intercept Depth
- 6.42 m
Classification
- Deposit Type
- epithermal
- Program
- mixed
- Sample Type
- drill
- Group ID
- DDCO26-005:6.42-7.6
- Mining Method
- open_pit
Location
- Easting
- 384760.2
- Northing
- 5199503.1
- CRS
- NAD83 / UTM Zone 12N
- Elevation
- 1863.2 m
- Azimuth
- 121 °
- Dip
- -70 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- AGAT Laboratories
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Deleterious
- Deleterious Flag
- No
Compositing
- Cutoff Grade
- 0.3
- Cutoff Unit
- g/t Au
- Dilution Disclosed
- Yes
- Max Dilution
- 3 m
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-10-12T00:00:00.000Z
Reasoning: Strong grade gold sub-intercept, but true width not determined.
Positive factors
- strong_grade
Negative factors
- apparent_width_only
Evidence · table
“3.64”
Context: 1.18
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Compositing Transparentpositive
Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Why it applies: cutoff_grade and internal dilution are both stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
Rejected tags
Rejected tags — excluded from scoring because their label or evidence could not be verified.
Apparent Width OnlyRejected · negative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Reason: Interval given as downhole width with no true width or drill orientation.
Evidence · text
“Intervals are downhole lengths; true widths have not yet been determined.”
DDCO26-005Columbia · goldGrade: 0.26Grade Unit: g/tIntercept: 5 mView all detailsHide details
Identity
- Hole ID
- DDCO26-005
- Project
- Columbia
- Commodity
- gold
- Region
- usa_mt
- Reported Region
- usa_mt
- Ticker
- SNM
Geometry
- Grade
- 0.26
- Grade Unit
- g/t
- Intercept
- 5 m
- From
- 146 m
- To
- 151 m
- Hole Depth
- 198 m
- Intercept Depth
- 6.42 m
Classification
- Deposit Type
- epithermal
- Program
- mixed
- Sample Type
- drill
- Group ID
- DDCO26-005:146-151
- Mining Method
- open_pit
Location
- Easting
- 384760.2
- Northing
- 5199503.1
- CRS
- NAD83 / UTM Zone 12N
- Elevation
- 1863.2 m
- Azimuth
- 121 °
- Dip
- -70 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- AGAT Laboratories
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Deleterious
- Deleterious Flag
- No
Compositing
- Cutoff Grade
- 0.3
- Cutoff Unit
- g/t Au
- Dilution Disclosed
- Yes
- Max Dilution
- 3 m
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-10-12T00:00:00.000Z
Reasoning: Weak grade gold intercept, below the 0.3g/t cut-off but included due to internal dilution rules. True width not determined.
Negative factors
- weak_grade
- apparent_width_only
Evidence · table
“0.26”
Context: 5.00
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Compositing Transparentpositive
Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Why it applies: cutoff_grade and internal dilution are both stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
Rejected tags
Rejected tags — excluded from scoring because their label or evidence could not be verified.
Apparent Width OnlyRejected · negative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Reason: Interval given as downhole width with no true width or drill orientation.
Evidence · text
“Intervals are downhole lengths; true widths have not yet been determined.”
DDCO26-005Columbia · goldGrade: 0.97Grade Unit: g/tIntercept: 4.89 mView all detailsHide details
Identity
- Hole ID
- DDCO26-005
- Project
- Columbia
- Commodity
- gold
- Region
- usa_mt
- Reported Region
- usa_mt
- Ticker
- SNM
Geometry
- Grade
- 0.97
- Grade Unit
- g/t
- Intercept
- 4.89 m
- From
- 156.11 m
- To
- 161 m
- Hole Depth
- 198 m
- Intercept Depth
- 6.42 m
Classification
- Deposit Type
- epithermal
- Program
- mixed
- Sample Type
- drill
- Group ID
- DDCO26-005:156.11-161
- Mining Method
- open_pit
Location
- Easting
- 384760.2
- Northing
- 5199503.1
- CRS
- NAD83 / UTM Zone 12N
- Elevation
- 1863.2 m
- Azimuth
- 121 °
- Dip
- -70 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- AGAT Laboratories
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Deleterious
- Deleterious Flag
- No
Compositing
- Cutoff Grade
- 0.3
- Cutoff Unit
- g/t Au
- Dilution Disclosed
- Yes
- Max Dilution
- 3 m
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-10-12T00:00:00.000Z
Reasoning: Moderate grade gold intercept, but true width not determined.
Positive factors
- moderate_grade
Negative factors
- apparent_width_only
Evidence · table
“0.97”
Context: 4.89
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Compositing Transparentpositive
Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Why it applies: cutoff_grade and internal dilution are both stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
Rejected tags
Rejected tags — excluded from scoring because their label or evidence could not be verified.
Apparent Width OnlyRejected · negative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Reason: Interval given as downhole width with no true width or drill orientation.
Evidence · text
“Intervals are downhole lengths; true widths have not yet been determined.”
DDCO26-006Columbia · goldGrade: 0.79Grade Unit: g/tIntercept: 3.87 mView all detailsHide details
Identity
- Hole ID
- DDCO26-006
- Project
- Columbia
- Commodity
- gold
- Region
- usa_mt
- Reported Region
- usa_mt
- Ticker
- SNM
Geometry
- Grade
- 0.79
- Grade Unit
- g/t
- Intercept
- 3.87 m
- From
- 69.57 m
- To
- 73.44 m
- Hole Depth
- 141 m
- Intercept Depth
- 69.57 m
Classification
- Deposit Type
- epithermal
- Program
- mixed
- Sample Type
- drill
- Group ID
- DDCO26-006:69.57-73.44
- Mining Method
- open_pit
Location
- Easting
- 384811
- Northing
- 5199688.2
- CRS
- NAD83 / UTM Zone 12N
- Elevation
- 1786.3 m
- Azimuth
- 89 °
- Dip
- -49 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- AGAT Laboratories
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Deleterious
- Deleterious Flag
- No
Compositing
- Cutoff Grade
- 0.3
- Cutoff Unit
- g/t Au
- Dilution Disclosed
- Yes
- Max Dilution
- 3 m
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-10-12T00:00:00.000Z
Reasoning: Weak grade gold intercept with low core recovery (78%), true width not determined.
Positive factors
- weak_grade
Negative factors
- apparent_width_only
- low_core_recovery
Evidence · table
“0.79”
Context: 3.87
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Compositing Transparentpositive
Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Why it applies: cutoff_grade and internal dilution are both stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
Rejected tags
Rejected tags — excluded from scoring because their label or evidence could not be verified.
Apparent Width OnlyRejected · negative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Reason: Interval given as downhole width with no true width or drill orientation.
Evidence · text
“Intervals are downhole lengths; true widths have not yet been determined.”
DDCO26-006Columbia · goldGrade: 0.48Grade Unit: g/tIntercept: 4.48 mView all detailsHide details
Identity
- Hole ID
- DDCO26-006
- Project
- Columbia
- Commodity
- gold
- Region
- usa_mt
- Reported Region
- usa_mt
- Ticker
- SNM
Geometry
- Grade
- 0.48
- Grade Unit
- g/t
- Intercept
- 4.48 m
- From
- 76.52 m
- To
- 81 m
- Hole Depth
- 141 m
- Intercept Depth
- 69.57 m
Classification
- Deposit Type
- epithermal
- Program
- mixed
- Sample Type
- drill
- Group ID
- DDCO26-006:76.52-81
- Mining Method
- open_pit
Location
- Easting
- 384811
- Northing
- 5199688.2
- CRS
- NAD83 / UTM Zone 12N
- Elevation
- 1786.3 m
- Azimuth
- 89 °
- Dip
- -49 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- AGAT Laboratories
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Deleterious
- Deleterious Flag
- No
Compositing
- Cutoff Grade
- 0.3
- Cutoff Unit
- g/t Au
- Dilution Disclosed
- Yes
- Max Dilution
- 3 m
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-10-12T00:00:00.000Z
Reasoning: Weak grade gold intercept, true width not determined.
Positive factors
- weak_grade
Negative factors
- apparent_width_only
Evidence · table
“0.48”
Context: 4.48
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Compositing Transparentpositive
Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Why it applies: cutoff_grade and internal dilution are both stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
Rejected tags
Rejected tags — excluded from scoring because their label or evidence could not be verified.
Apparent Width OnlyRejected · negative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Reason: Interval given as downhole width with no true width or drill orientation.
Evidence · text
“Intervals are downhole lengths; true widths have not yet been determined.”
DDCO26-006Columbia · goldGrade: 0.69Grade Unit: g/tIntercept: 4.16 mView all detailsHide details
Identity
- Hole ID
- DDCO26-006
- Project
- Columbia
- Commodity
- gold
- Region
- usa_mt
- Reported Region
- usa_mt
- Ticker
- SNM
Geometry
- Grade
- 0.69
- Grade Unit
- g/t
- Intercept
- 4.16 m
- From
- 85.12 m
- To
- 89.28 m
- Hole Depth
- 141 m
- Intercept Depth
- 69.57 m
Classification
- Deposit Type
- epithermal
- Program
- mixed
- Sample Type
- drill
- Group ID
- DDCO26-006:85.12-89.28
- Mining Method
- open_pit
Location
- Easting
- 384811
- Northing
- 5199688.2
- CRS
- NAD83 / UTM Zone 12N
- Elevation
- 1786.3 m
- Azimuth
- 89 °
- Dip
- -49 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- AGAT Laboratories
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Deleterious
- Deleterious Flag
- No
Compositing
- Cutoff Grade
- 0.3
- Cutoff Unit
- g/t Au
- Dilution Disclosed
- Yes
- Max Dilution
- 3 m
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-10-12T00:00:00.000Z
Reasoning: Weak grade gold intercept, true width not determined.
Positive factors
- weak_grade
Negative factors
- apparent_width_only
Evidence · table
“0.69”
Context: 4.16
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Compositing Transparentpositive
Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Why it applies: cutoff_grade and internal dilution are both stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
Rejected tags
Rejected tags — excluded from scoring because their label or evidence could not be verified.
Apparent Width OnlyRejected · negative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Reason: Interval given as downhole width with no true width or drill orientation.
Evidence · text
“Intervals are downhole lengths; true widths have not yet been determined.”
DDCO26-006Columbia · goldGrade: 0.35Grade Unit: g/tIntercept: 1.26 mView all detailsHide details
Identity
- Hole ID
- DDCO26-006
- Project
- Columbia
- Commodity
- gold
- Region
- usa_mt
- Reported Region
- usa_mt
- Ticker
- SNM
Geometry
- Grade
- 0.35
- Grade Unit
- g/t
- Intercept
- 1.26 m
- From
- 101.2 m
- To
- 102.46 m
- Hole Depth
- 141 m
- Intercept Depth
- 69.57 m
Classification
- Deposit Type
- epithermal
- Program
- mixed
- Sample Type
- drill
- Group ID
- DDCO26-006:101.2-102.46
- Mining Method
- open_pit
Location
- Easting
- 384811
- Northing
- 5199688.2
- CRS
- NAD83 / UTM Zone 12N
- Elevation
- 1786.3 m
- Azimuth
- 89 °
- Dip
- -49 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- AGAT Laboratories
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Deleterious
- Deleterious Flag
- No
Compositing
- Cutoff Grade
- 0.3
- Cutoff Unit
- g/t Au
- Dilution Disclosed
- Yes
- Max Dilution
- 3 m
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-10-12T00:00:00.000Z
Reasoning: Weak grade gold intercept with low core recovery (64%), true width not determined.
Positive factors
- weak_grade
Negative factors
- apparent_width_only
- low_core_recovery
Evidence · table
“0.35”
Context: 1.26
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Compositing Transparentpositive
Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Why it applies: cutoff_grade and internal dilution are both stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
Rejected tags
Rejected tags — excluded from scoring because their label or evidence could not be verified.
Apparent Width OnlyRejected · negative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Reason: Interval given as downhole width with no true width or drill orientation.
Evidence · text
“Intervals are downhole lengths; true widths have not yet been determined.”
DDCO26-006Columbia · goldGrade: 0.58Grade Unit: g/tIntercept: 1.24 mView all detailsHide details
Identity
- Hole ID
- DDCO26-006
- Project
- Columbia
- Commodity
- gold
- Region
- usa_mt
- Reported Region
- usa_mt
- Ticker
- SNM
Geometry
- Grade
- 0.58
- Grade Unit
- g/t
- Intercept
- 1.24 m
- From
- 103.9 m
- To
- 105.14 m
- Hole Depth
- 141 m
- Intercept Depth
- 69.57 m
Classification
- Deposit Type
- epithermal
- Program
- mixed
- Sample Type
- drill
- Group ID
- DDCO26-006:103.9-105.14
- Mining Method
- open_pit
Location
- Easting
- 384811
- Northing
- 5199688.2
- CRS
- NAD83 / UTM Zone 12N
- Elevation
- 1786.3 m
- Azimuth
- 89 °
- Dip
- -49 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- AGAT Laboratories
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Deleterious
- Deleterious Flag
- No
Compositing
- Cutoff Grade
- 0.3
- Cutoff Unit
- g/t Au
- Dilution Disclosed
- Yes
- Max Dilution
- 3 m
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-10-12T00:00:00.000Z
Reasoning: Weak grade gold intercept, true width not determined.
Positive factors
- weak_grade
Negative factors
- apparent_width_only
Evidence · table
“0.58”
Context: 1.24
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Compositing Transparentpositive
Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Why it applies: cutoff_grade and internal dilution are both stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
Rejected tags
Rejected tags — excluded from scoring because their label or evidence could not be verified.
Apparent Width OnlyRejected · negative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Reason: Interval given as downhole width with no true width or drill orientation.
Evidence · text
“Intervals are downhole lengths; true widths have not yet been determined.”
DDCO26-006Columbia · goldGrade: 0.88Grade Unit: g/tIntercept: 1.58 mView all detailsHide details
Identity
- Hole ID
- DDCO26-006
- Project
- Columbia
- Commodity
- gold
- Region
- usa_mt
- Reported Region
- usa_mt
- Ticker
- SNM
Geometry
- Grade
- 0.88
- Grade Unit
- g/t
- Intercept
- 1.58 m
- From
- 108.26 m
- To
- 109.84 m
- Hole Depth
- 141 m
- Intercept Depth
- 69.57 m
Classification
- Deposit Type
- epithermal
- Program
- mixed
- Sample Type
- drill
- Group ID
- DDCO26-006:108.26-109.84
- Mining Method
- open_pit
Location
- Easting
- 384811
- Northing
- 5199688.2
- CRS
- NAD83 / UTM Zone 12N
- Elevation
- 1786.3 m
- Azimuth
- 89 °
- Dip
- -49 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- AGAT Laboratories
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Deleterious
- Deleterious Flag
- No
Compositing
- Cutoff Grade
- 0.3
- Cutoff Unit
- g/t Au
- Dilution Disclosed
- Yes
- Max Dilution
- 3 m
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-10-12T00:00:00.000Z
Reasoning: Weak grade gold intercept with low core recovery (92%), true width not determined.
Positive factors
- weak_grade
Negative factors
- apparent_width_only
- low_core_recovery
Evidence · table
“0.88”
Context: 1.58
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Compositing Transparentpositive
Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Why it applies: cutoff_grade and internal dilution are both stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
Rejected tags
Rejected tags — excluded from scoring because their label or evidence could not be verified.
Apparent Width OnlyRejected · negative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Reason: Interval given as downhole width with no true width or drill orientation.
Evidence · text
“Intervals are downhole lengths; true widths have not yet been determined.”
DDCO26-006Columbia · goldGrade: 0.94Grade Unit: g/tIntercept: 2 mView all detailsHide details
Identity
- Hole ID
- DDCO26-006
- Project
- Columbia
- Commodity
- gold
- Region
- usa_mt
- Reported Region
- usa_mt
- Ticker
- SNM
Geometry
- Grade
- 0.94
- Grade Unit
- g/t
- Intercept
- 2 m
- From
- 122 m
- To
- 124 m
- Hole Depth
- 141 m
- Intercept Depth
- 69.57 m
Classification
- Deposit Type
- epithermal
- Program
- mixed
- Sample Type
- drill
- Group ID
- DDCO26-006:122-124
- Mining Method
- open_pit
Location
- Easting
- 384811
- Northing
- 5199688.2
- CRS
- NAD83 / UTM Zone 12N
- Elevation
- 1786.3 m
- Azimuth
- 89 °
- Dip
- -49 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- AGAT Laboratories
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Deleterious
- Deleterious Flag
- No
Compositing
- Cutoff Grade
- 0.3
- Cutoff Unit
- g/t Au
- Dilution Disclosed
- Yes
- Max Dilution
- 3 m
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-10-12T00:00:00.000Z
Reasoning: Weak grade gold intercept, true width not determined.
Positive factors
- weak_grade
Negative factors
- apparent_width_only
Evidence · table
“0.94”
Context: 2.00
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Compositing Transparentpositive
Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Why it applies: cutoff_grade and internal dilution are both stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
Rejected tags
Rejected tags — excluded from scoring because their label or evidence could not be verified.
Apparent Width OnlyRejected · negative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Reason: Interval given as downhole width with no true width or drill orientation.
Evidence · text
“Intervals are downhole lengths; true widths have not yet been determined.”
DDCO26-007ColumbiaView all detailsHide details
Identity
- Hole ID
- DDCO26-007
- Project
- Columbia
- Region
- usa_mt
- Reported Region
- usa_mt
- Ticker
- SNM
Geometry
- Hole Depth
- 246.1 m
Classification
- Deposit Type
- epithermal
- Program
- mixed
- Sample Type
- drill
- Mining Method
- open_pit
Location
- Easting
- 384681.8
- Northing
- 5199738
- CRS
- NAD83 / UTM Zone 12N
- Elevation
- 1758 m
- Azimuth
- 90 °
- Dip
- -50 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- AGAT Laboratories
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Deleterious
- Deleterious Flag
- No
Compositing
- Cutoff Grade
- 0.3
- Cutoff Unit
- g/t Au
- Dilution Disclosed
- Yes
- Max Dilution
- 3 m
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-10-12T00:00:00.000Z
Reasoning: No significant gold intercept reported above the 0.3g/t Au cut-off.
Negative factors
- no_significant_intercept
Evidence · table
“NSI”
Context: 1758.0
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Compositing Transparentpositive
Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Why it applies: cutoff_grade and internal dilution are both stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
DDCO26-008Columbia · goldGrade: 0.51Grade Unit: g/tIntercept: 2.5 mView all detailsHide details
Identity
- Hole ID
- DDCO26-008
- Project
- Columbia
- Commodity
- gold
- Region
- usa_mt
- Reported Region
- usa_mt
- Ticker
- SNM
Geometry
- Grade
- 0.51
- Grade Unit
- g/t
- Intercept
- 2.5 m
- From
- 55 m
- To
- 57.5 m
- Hole Depth
- 248 m
- Intercept Depth
- 55 m
Classification
- Deposit Type
- epithermal
- Program
- mixed
- Sample Type
- drill
- Group ID
- DDCO26-008:55-57.5
- Mining Method
- open_pit
Location
- Easting
- 384900.6
- Northing
- 5199974.4
- CRS
- NAD83 / UTM Zone 12N
- Elevation
- 1941 m
- Azimuth
- 68 °
- Dip
- -49 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- AGAT Laboratories
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Deleterious
- Deleterious Flag
- No
Compositing
- Cutoff Grade
- 0.3
- Cutoff Unit
- g/t Au
- Dilution Disclosed
- Yes
- Max Dilution
- 3 m
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-10-12T00:00:00.000Z
Reasoning: Weak grade gold intercept with low core recovery (84%), true width not determined.
Positive factors
- weak_grade
Negative factors
- apparent_width_only
- low_core_recovery
Evidence · table
“0.51”
Context: 2.50
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Compositing Transparentpositive
Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Why it applies: cutoff_grade and internal dilution are both stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
Rejected tags
Rejected tags — excluded from scoring because their label or evidence could not be verified.
Apparent Width OnlyRejected · negative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Reason: Interval given as downhole width with no true width or drill orientation.
Evidence · text
“Intervals are downhole lengths; true widths have not yet been determined.”
DDCO26-009Columbia · goldGrade: 0.5Grade Unit: g/tIntercept: 6.34 mView all detailsHide details
Identity
- Hole ID
- DDCO26-009
- Project
- Columbia
- Commodity
- gold
- Region
- usa_mt
- Reported Region
- usa_mt
- Ticker
- SNM
Geometry
- Grade
- 0.5
- Grade Unit
- g/t
- Intercept
- 6.34 m
- From
- 33.66 m
- To
- 40 m
- Hole Depth
- 144 m
- Intercept Depth
- 33.66 m
Classification
- Deposit Type
- epithermal
- Program
- mixed
- Sample Type
- drill
- Group ID
- DDCO26-009:33.66-40
- Mining Method
- open_pit
Location
- Easting
- 385179.8
- Northing
- 5200460.4
- CRS
- NAD83 / UTM Zone 12N
- Elevation
- 1945 m
- Azimuth
- 272 °
- Dip
- -58 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- AGAT Laboratories
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Deleterious
- Deleterious Flag
- No
Compositing
- Cutoff Grade
- 0.3
- Cutoff Unit
- g/t Au
- Dilution Disclosed
- Yes
- Max Dilution
- 3 m
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-10-12T00:00:00.000Z
Reasoning: Weak grade gold intercept, true width not determined.
Positive factors
- weak_grade
Negative factors
- apparent_width_only
Evidence · table
“0.50”
Context: 6.34
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Compositing Transparentpositive
Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Why it applies: cutoff_grade and internal dilution are both stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
Rejected tags
Rejected tags — excluded from scoring because their label or evidence could not be verified.
Apparent Width OnlyRejected · negative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Reason: Interval given as downhole width with no true width or drill orientation.
Evidence · text
“Intervals are downhole lengths; true widths have not yet been determined.”
DDCO26-009Columbia · goldGrade: 0.44Grade Unit: g/tIntercept: 3.73 mView all detailsHide details
Identity
- Hole ID
- DDCO26-009
- Project
- Columbia
- Commodity
- gold
- Region
- usa_mt
- Reported Region
- usa_mt
- Ticker
- SNM
Geometry
- Grade
- 0.44
- Grade Unit
- g/t
- Intercept
- 3.73 m
- From
- 57.05 m
- To
- 60.78 m
- Hole Depth
- 144 m
- Intercept Depth
- 33.66 m
Classification
- Deposit Type
- epithermal
- Program
- mixed
- Sample Type
- drill
- Group ID
- DDCO26-009:57.05-60.78
- Mining Method
- open_pit
Location
- Easting
- 385179.8
- Northing
- 5200460.4
- CRS
- NAD83 / UTM Zone 12N
- Elevation
- 1945 m
- Azimuth
- 272 °
- Dip
- -58 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- AGAT Laboratories
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Deleterious
- Deleterious Flag
- No
Compositing
- Cutoff Grade
- 0.3
- Cutoff Unit
- g/t Au
- Dilution Disclosed
- Yes
- Max Dilution
- 3 m
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-10-12T00:00:00.000Z
Reasoning: Weak grade gold intercept, true width not determined.
Positive factors
- weak_grade
Negative factors
- apparent_width_only
Evidence · table
“0.44”
Context: 3.73
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Compositing Transparentpositive
Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Why it applies: cutoff_grade and internal dilution are both stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
Rejected tags
Rejected tags — excluded from scoring because their label or evidence could not be verified.
Apparent Width OnlyRejected · negative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Reason: Interval given as downhole width with no true width or drill orientation.
Evidence · text
“Intervals are downhole lengths; true widths have not yet been determined.”
DDCO26-009Columbia · goldGrade: 0.29Grade Unit: g/tIntercept: 5 mView all detailsHide details
Identity
- Hole ID
- DDCO26-009
- Project
- Columbia
- Commodity
- gold
- Region
- usa_mt
- Reported Region
- usa_mt
- Ticker
- SNM
Geometry
- Grade
- 0.29
- Grade Unit
- g/t
- Intercept
- 5 m
- From
- 69.75 m
- To
- 74.75 m
- Hole Depth
- 144 m
- Intercept Depth
- 33.66 m
Classification
- Deposit Type
- epithermal
- Program
- mixed
- Sample Type
- drill
- Group ID
- DDCO26-009:69.75-74.75
- Mining Method
- open_pit
Location
- Easting
- 385179.8
- Northing
- 5200460.4
- CRS
- NAD83 / UTM Zone 12N
- Elevation
- 1945 m
- Azimuth
- 272 °
- Dip
- -58 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- AGAT Laboratories
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Deleterious
- Deleterious Flag
- No
Compositing
- Cutoff Grade
- 0.3
- Cutoff Unit
- g/t Au
- Dilution Disclosed
- Yes
- Max Dilution
- 3 m
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-10-12T00:00:00.000Z
Reasoning: Weak grade gold intercept, below the 0.3g/t cut-off but included due to internal dilution rules. True width not determined.
Negative factors
- weak_grade
- apparent_width_only
Evidence · table
“0.29”
Context: 5.00
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Compositing Transparentpositive
Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Why it applies: cutoff_grade and internal dilution are both stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
Rejected tags
Rejected tags — excluded from scoring because their label or evidence could not be verified.
Apparent Width OnlyRejected · negative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Reason: Interval given as downhole width with no true width or drill orientation.
Evidence · text
“Intervals are downhole lengths; true widths have not yet been determined.”
DDCO26-009Columbia · goldGrade: 0.39Grade Unit: g/tIntercept: 8.6 mView all detailsHide details
Identity
- Hole ID
- DDCO26-009
- Project
- Columbia
- Commodity
- gold
- Region
- usa_mt
- Reported Region
- usa_mt
- Ticker
- SNM
Geometry
- Grade
- 0.39
- Grade Unit
- g/t
- Intercept
- 8.6 m
- From
- 79.9 m
- To
- 88.5 m
- Hole Depth
- 144 m
- Intercept Depth
- 33.66 m
Classification
- Deposit Type
- epithermal
- Program
- mixed
- Sample Type
- drill
- Group ID
- DDCO26-009:79.9-88.5
- Mining Method
- open_pit
Location
- Easting
- 385179.8
- Northing
- 5200460.4
- CRS
- NAD83 / UTM Zone 12N
- Elevation
- 1945 m
- Azimuth
- 272 °
- Dip
- -58 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- AGAT Laboratories
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Deleterious
- Deleterious Flag
- No
Compositing
- Cutoff Grade
- 0.3
- Cutoff Unit
- g/t Au
- Dilution Disclosed
- Yes
- Max Dilution
- 3 m
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-10-12T00:00:00.000Z
Reasoning: Weak grade gold intercept, true width not determined.
Positive factors
- weak_grade
Negative factors
- apparent_width_only
Evidence · table
“0.39”
Context: 8.60
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Compositing Transparentpositive
Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Why it applies: cutoff_grade and internal dilution are both stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
Rejected tags
Rejected tags — excluded from scoring because their label or evidence could not be verified.
Apparent Width OnlyRejected · negative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Reason: Interval given as downhole width with no true width or drill orientation.
Evidence · text
“Intervals are downhole lengths; true widths have not yet been determined.”
DDCO26-009Columbia · goldGrade: 0.37Grade Unit: g/tIntercept: 3.06 mView all detailsHide details
Identity
- Hole ID
- DDCO26-009
- Project
- Columbia
- Commodity
- gold
- Region
- usa_mt
- Reported Region
- usa_mt
- Ticker
- SNM
Geometry
- Grade
- 0.37
- Grade Unit
- g/t
- Intercept
- 3.06 m
- From
- 95 m
- To
- 98.06 m
- Hole Depth
- 144 m
- Intercept Depth
- 33.66 m
Classification
- Deposit Type
- epithermal
- Program
- mixed
- Sample Type
- drill
- Group ID
- DDCO26-009:95-98.06
- Mining Method
- open_pit
Location
- Easting
- 385179.8
- Northing
- 5200460.4
- CRS
- NAD83 / UTM Zone 12N
- Elevation
- 1945 m
- Azimuth
- 272 °
- Dip
- -58 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- AGAT Laboratories
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Deleterious
- Deleterious Flag
- No
Compositing
- Cutoff Grade
- 0.3
- Cutoff Unit
- g/t Au
- Dilution Disclosed
- Yes
- Max Dilution
- 3 m
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-10-12T00:00:00.000Z
Reasoning: Weak grade gold intercept, true width not determined.
Positive factors
- weak_grade
Negative factors
- apparent_width_only
Evidence · table
“0.37”
Context: 3.06
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Compositing Transparentpositive
Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Why it applies: cutoff_grade and internal dilution are both stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
Rejected tags
Rejected tags — excluded from scoring because their label or evidence could not be verified.
Apparent Width OnlyRejected · negative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Reason: Interval given as downhole width with no true width or drill orientation.
Evidence · text
“Intervals are downhole lengths; true widths have not yet been determined.”
DDCO26-009Columbia · goldGrade: 0.8Grade Unit: g/tIntercept: 3.03 mView all detailsHide details
Identity
- Hole ID
- DDCO26-009
- Project
- Columbia
- Commodity
- gold
- Region
- usa_mt
- Reported Region
- usa_mt
- Ticker
- SNM
Geometry
- Grade
- 0.8
- Grade Unit
- g/t
- Intercept
- 3.03 m
- From
- 123.47 m
- To
- 126.5 m
- Hole Depth
- 144 m
- Intercept Depth
- 33.66 m
Classification
- Deposit Type
- epithermal
- Program
- mixed
- Sample Type
- drill
- Group ID
- DDCO26-009:123.47-126.5
- Mining Method
- open_pit
Location
- Easting
- 385179.8
- Northing
- 5200460.4
- CRS
- NAD83 / UTM Zone 12N
- Elevation
- 1945 m
- Azimuth
- 272 °
- Dip
- -58 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- AGAT Laboratories
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Deleterious
- Deleterious Flag
- No
Compositing
- Cutoff Grade
- 0.3
- Cutoff Unit
- g/t Au
- Dilution Disclosed
- Yes
- Max Dilution
- 3 m
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-10-12T00:00:00.000Z
Reasoning: Weak grade gold intercept, true width not determined.
Positive factors
- weak_grade
Negative factors
- apparent_width_only
Evidence · table
“0.80”
Context: 3.03
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Compositing Transparentpositive
Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Why it applies: cutoff_grade and internal dilution are both stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
Rejected tags
Rejected tags — excluded from scoring because their label or evidence could not be verified.
Apparent Width OnlyRejected · negative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Reason: Interval given as downhole width with no true width or drill orientation.
Evidence · text
“Intervals are downhole lengths; true widths have not yet been determined.”
DDCO26-009Columbia · goldGrade: 0.7Grade Unit: g/tIntercept: 2.93 mView all detailsHide details
Identity
- Hole ID
- DDCO26-009
- Project
- Columbia
- Commodity
- gold
- Region
- usa_mt
- Reported Region
- usa_mt
- Ticker
- SNM
Geometry
- Grade
- 0.7
- Grade Unit
- g/t
- Intercept
- 2.93 m
- From
- 132.49 m
- To
- 135.42 m
- Hole Depth
- 144 m
- Intercept Depth
- 33.66 m
Classification
- Deposit Type
- epithermal
- Program
- mixed
- Sample Type
- drill
- Group ID
- DDCO26-009:132.49-135.42
- Mining Method
- open_pit
Location
- Easting
- 385179.8
- Northing
- 5200460.4
- CRS
- NAD83 / UTM Zone 12N
- Elevation
- 1945 m
- Azimuth
- 272 °
- Dip
- -58 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- AGAT Laboratories
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Deleterious
- Deleterious Flag
- No
Compositing
- Cutoff Grade
- 0.3
- Cutoff Unit
- g/t Au
- Dilution Disclosed
- Yes
- Max Dilution
- 3 m
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-10-12T00:00:00.000Z
Reasoning: Weak grade gold intercept with low core recovery (32%), true width not determined.
Positive factors
- weak_grade
Negative factors
- apparent_width_only
- low_core_recovery
Evidence · table
“0.70”
Context: 2.93
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Compositing Transparentpositive
Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Why it applies: cutoff_grade and internal dilution are both stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
Rejected tags
Rejected tags — excluded from scoring because their label or evidence could not be verified.
Apparent Width OnlyRejected · negative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Reason: Interval given as downhole width with no true width or drill orientation.
Evidence · text
“Intervals are downhole lengths; true widths have not yet been determined.”
DDCO26-009Columbia · goldGrade: 0.43Grade Unit: g/tIntercept: 1.76 mView all detailsHide details
Identity
- Hole ID
- DDCO26-009
- Project
- Columbia
- Commodity
- gold
- Region
- usa_mt
- Reported Region
- usa_mt
- Ticker
- SNM
Geometry
- Grade
- 0.43
- Grade Unit
- g/t
- Intercept
- 1.76 m
- From
- 138.65 m
- To
- 140.41 m
- Hole Depth
- 144 m
- Intercept Depth
- 33.66 m
Classification
- Deposit Type
- epithermal
- Program
- mixed
- Sample Type
- drill
- Group ID
- DDCO26-009:138.65-140.41
- Mining Method
- open_pit
Location
- Easting
- 385179.8
- Northing
- 5200460.4
- CRS
- NAD83 / UTM Zone 12N
- Elevation
- 1945 m
- Azimuth
- 272 °
- Dip
- -58 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- AGAT Laboratories
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Deleterious
- Deleterious Flag
- No
Compositing
- Cutoff Grade
- 0.3
- Cutoff Unit
- g/t Au
- Dilution Disclosed
- Yes
- Max Dilution
- 3 m
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-10-12T00:00:00.000Z
Reasoning: Weak grade gold intercept with low core recovery (54%), true width not determined.
Positive factors
- weak_grade
Negative factors
- apparent_width_only
- low_core_recovery
Evidence · table
“0.43”
Context: 1.76
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Compositing Transparentpositive
Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Why it applies: cutoff_grade and internal dilution are both stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
Rejected tags
Rejected tags — excluded from scoring because their label or evidence could not be verified.
Apparent Width OnlyRejected · negative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Reason: Interval given as downhole width with no true width or drill orientation.
Evidence · text
“Intervals are downhole lengths; true widths have not yet been determined.”
DDCO26-010Columbia · goldGrade: 1.14Grade Unit: g/tIntercept: 6.17 mView all detailsHide details
Identity
- Hole ID
- DDCO26-010
- Project
- Columbia
- Commodity
- gold
- Region
- usa_mt
- Reported Region
- usa_mt
- Ticker
- SNM
Geometry
- Grade
- 1.14
- Grade Unit
- g/t
- Intercept
- 6.17 m
- From
- 10.83 m
- To
- 17 m
- Hole Depth
- 180.1 m
- Intercept Depth
- 10.83 m
Classification
- Deposit Type
- epithermal
- Program
- mixed
- Sample Type
- drill
- Group ID
- DDCO26-010:10.83-17
- Mining Method
- open_pit
Location
- Easting
- 385033
- Northing
- 5200598.7
- CRS
- NAD83 / UTM Zone 12N
- Elevation
- 1938 m
- Azimuth
- 89 °
- Dip
- -70 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- AGAT Laboratories
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Deleterious
- Deleterious Flag
- No
Compositing
- Cutoff Grade
- 0.3
- Cutoff Unit
- g/t Au
- Dilution Disclosed
- Yes
- Max Dilution
- 3 m
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-10-12T00:00:00.000Z
Reasoning: Moderate grade gold intercept, true width not determined.
Positive factors
- moderate_grade
Negative factors
- apparent_width_only
Evidence · table
“1.14”
Context: 6.17
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Compositing Transparentpositive
Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Why it applies: cutoff_grade and internal dilution are both stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
Rejected tags
Rejected tags — excluded from scoring because their label or evidence could not be verified.
Apparent Width OnlyRejected · negative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Reason: Interval given as downhole width with no true width or drill orientation.
Evidence · text
“Intervals are downhole lengths; true widths have not yet been determined.”
DDCO26-010Columbia · goldGrade: 3.02Grade Unit: g/tIntercept: 2.83 mView all detailsHide details
Identity
- Hole ID
- DDCO26-010
- Project
- Columbia
- Commodity
- gold
- Region
- usa_mt
- Reported Region
- usa_mt
- Ticker
- SNM
Geometry
- Grade
- 3.02
- Grade Unit
- g/t
- Intercept
- 2.83 m
- From
- 28.7 m
- To
- 31.53 m
- Hole Depth
- 180.1 m
- Intercept Depth
- 10.83 m
Classification
- Deposit Type
- epithermal
- Program
- mixed
- Sample Type
- drill
- Group ID
- DDCO26-010:28.7-31.53
- Mining Method
- open_pit
Location
- Easting
- 385033
- Northing
- 5200598.7
- CRS
- NAD83 / UTM Zone 12N
- Elevation
- 1938 m
- Azimuth
- 89 °
- Dip
- -70 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- AGAT Laboratories
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Deleterious
- Deleterious Flag
- No
Compositing
- Cutoff Grade
- 0.3
- Cutoff Unit
- g/t Au
- Dilution Disclosed
- Yes
- Max Dilution
- 3 m
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-10-12T00:00:00.000Z
Reasoning: Strong grade gold intercept, but very low core recovery (33%) should be treated with caution. True width not determined.
Positive factors
- strong_grade
Negative factors
- apparent_width_only
- very_low_core_recovery
Evidence · table
“3.02”
Context: 2.83
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Compositing Transparentpositive
Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Why it applies: cutoff_grade and internal dilution are both stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
Rejected tags
Rejected tags — excluded from scoring because their label or evidence could not be verified.
Apparent Width OnlyRejected · negative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Reason: Interval given as downhole width with no true width or drill orientation.
Evidence · text
“Intervals are downhole lengths; true widths have not yet been determined.”
DDCO26-010Columbia · goldGrade: 1.11Grade Unit: g/tIntercept: 2.05 mView all detailsHide details
Identity
- Hole ID
- DDCO26-010
- Project
- Columbia
- Commodity
- gold
- Region
- usa_mt
- Reported Region
- usa_mt
- Ticker
- SNM
Geometry
- Grade
- 1.11
- Grade Unit
- g/t
- Intercept
- 2.05 m
- From
- 45.45 m
- To
- 47.5 m
- Hole Depth
- 180.1 m
- Intercept Depth
- 10.83 m
Classification
- Deposit Type
- epithermal
- Program
- mixed
- Sample Type
- drill
- Group ID
- DDCO26-010:45.45-47.5
- Mining Method
- open_pit
Location
- Easting
- 385033
- Northing
- 5200598.7
- CRS
- NAD83 / UTM Zone 12N
- Elevation
- 1938 m
- Azimuth
- 89 °
- Dip
- -70 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- AGAT Laboratories
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Deleterious
- Deleterious Flag
- No
Compositing
- Cutoff Grade
- 0.3
- Cutoff Unit
- g/t Au
- Dilution Disclosed
- Yes
- Max Dilution
- 3 m
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-10-12T00:00:00.000Z
Reasoning: Moderate grade gold intercept with low core recovery (75%), true width not determined.
Positive factors
- moderate_grade
Negative factors
- apparent_width_only
- low_core_recovery
Evidence · table
“1.11”
Context: 2.05
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Compositing Transparentpositive
Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Why it applies: cutoff_grade and internal dilution are both stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
Rejected tags
Rejected tags — excluded from scoring because their label or evidence could not be verified.
Apparent Width OnlyRejected · negative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Reason: Interval given as downhole width with no true width or drill orientation.
Evidence · text
“Intervals are downhole lengths; true widths have not yet been determined.”
DDCO26-010Columbia · goldGrade: 0.45Grade Unit: g/tIntercept: 2.5 mView all detailsHide details
Identity
- Hole ID
- DDCO26-010
- Project
- Columbia
- Commodity
- gold
- Region
- usa_mt
- Reported Region
- usa_mt
- Ticker
- SNM
Geometry
- Grade
- 0.45
- Grade Unit
- g/t
- Intercept
- 2.5 m
- From
- 54.5 m
- To
- 57 m
- Hole Depth
- 180.1 m
- Intercept Depth
- 10.83 m
Classification
- Deposit Type
- epithermal
- Program
- mixed
- Sample Type
- drill
- Group ID
- DDCO26-010:54.5-57
- Mining Method
- open_pit
Location
- Easting
- 385033
- Northing
- 5200598.7
- CRS
- NAD83 / UTM Zone 12N
- Elevation
- 1938 m
- Azimuth
- 89 °
- Dip
- -70 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- AGAT Laboratories
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Deleterious
- Deleterious Flag
- No
Compositing
- Cutoff Grade
- 0.3
- Cutoff Unit
- g/t Au
- Dilution Disclosed
- Yes
- Max Dilution
- 3 m
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-10-12T00:00:00.000Z
Reasoning: Weak grade gold intercept with low core recovery (62%), true width not determined.
Positive factors
- weak_grade
Negative factors
- apparent_width_only
- low_core_recovery
Evidence · table
“0.45”
Context: 2.50
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Compositing Transparentpositive
Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Why it applies: cutoff_grade and internal dilution are both stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
Rejected tags
Rejected tags — excluded from scoring because their label or evidence could not be verified.
Apparent Width OnlyRejected · negative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Reason: Interval given as downhole width with no true width or drill orientation.
Evidence · text
“Intervals are downhole lengths; true widths have not yet been determined.”
DDCO26-010Columbia · goldGrade: 0.47Grade Unit: g/tIntercept: 1.64 mView all detailsHide details
Identity
- Hole ID
- DDCO26-010
- Project
- Columbia
- Commodity
- gold
- Region
- usa_mt
- Reported Region
- usa_mt
- Ticker
- SNM
Geometry
- Grade
- 0.47
- Grade Unit
- g/t
- Intercept
- 1.64 m
- From
- 60.64 m
- To
- 62.28 m
- Hole Depth
- 180.1 m
- Intercept Depth
- 10.83 m
Classification
- Deposit Type
- epithermal
- Program
- mixed
- Sample Type
- drill
- Group ID
- DDCO26-010:60.64-62.28
- Mining Method
- open_pit
Location
- Easting
- 385033
- Northing
- 5200598.7
- CRS
- NAD83 / UTM Zone 12N
- Elevation
- 1938 m
- Azimuth
- 89 °
- Dip
- -70 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- AGAT Laboratories
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Deleterious
- Deleterious Flag
- No
Compositing
- Cutoff Grade
- 0.3
- Cutoff Unit
- g/t Au
- Dilution Disclosed
- Yes
- Max Dilution
- 3 m
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-10-12T00:00:00.000Z
Reasoning: Weak grade gold intercept, true width not determined.
Positive factors
- weak_grade
Negative factors
- apparent_width_only
Evidence · table
“0.47”
Context: 1.64
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Compositing Transparentpositive
Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Why it applies: cutoff_grade and internal dilution are both stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
Rejected tags
Rejected tags — excluded from scoring because their label or evidence could not be verified.
Apparent Width OnlyRejected · negative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Reason: Interval given as downhole width with no true width or drill orientation.
Evidence · text
“Intervals are downhole lengths; true widths have not yet been determined.”
DDCO26-010Columbia · goldGrade: 1.18Grade Unit: g/tIntercept: 9.37 mView all detailsHide details
Identity
- Hole ID
- DDCO26-010
- Project
- Columbia
- Commodity
- gold
- Region
- usa_mt
- Reported Region
- usa_mt
- Ticker
- SNM
Geometry
- Grade
- 1.18
- Grade Unit
- g/t
- Intercept
- 9.37 m
- From
- 110.89 m
- To
- 120.26 m
- Hole Depth
- 180.1 m
- Intercept Depth
- 10.83 m
Classification
- Deposit Type
- epithermal
- Program
- mixed
- Sample Type
- drill
- Group ID
- DDCO26-010:110.89-120.26
- Mining Method
- open_pit
Location
- Easting
- 385033
- Northing
- 5200598.7
- CRS
- NAD83 / UTM Zone 12N
- Elevation
- 1938 m
- Azimuth
- 89 °
- Dip
- -70 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- AGAT Laboratories
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Deleterious
- Deleterious Flag
- No
Compositing
- Cutoff Grade
- 0.3
- Cutoff Unit
- g/t Au
- Dilution Disclosed
- Yes
- Max Dilution
- 3 m
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-10-12T00:00:00.000Z
Reasoning: Moderate grade gold intercept, true width not determined.
Positive factors
- moderate_grade
Negative factors
- apparent_width_only
Evidence · table
“1.18”
Context: 9.37
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Compositing Transparentpositive
Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Why it applies: cutoff_grade and internal dilution are both stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
Rejected tags
Rejected tags — excluded from scoring because their label or evidence could not be verified.
Apparent Width OnlyRejected · negative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Reason: Interval given as downhole width with no true width or drill orientation.
Evidence · text
“Intervals are downhole lengths; true widths have not yet been determined.”
DDCO26-010Columbia · goldGrade: 2.34Grade Unit: g/tIntercept: 1.61 mView all detailsHide details
Identity
- Hole ID
- DDCO26-010
- Project
- Columbia
- Commodity
- gold
- Region
- usa_mt
- Reported Region
- usa_mt
- Ticker
- SNM
Geometry
- Grade
- 2.34
- Grade Unit
- g/t
- Intercept
- 1.61 m
- From
- 110.89 m
- To
- 112.5 m
- Hole Depth
- 180.1 m
- Intercept Depth
- 10.83 m
Classification
- Deposit Type
- epithermal
- Program
- mixed
- Sample Type
- drill
- Group ID
- DDCO26-010:110.89-112.5
- Mining Method
- open_pit
Location
- Easting
- 385033
- Northing
- 5200598.7
- CRS
- NAD83 / UTM Zone 12N
- Elevation
- 1938 m
- Azimuth
- 89 °
- Dip
- -70 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- AGAT Laboratories
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Deleterious
- Deleterious Flag
- No
Compositing
- Cutoff Grade
- 0.3
- Cutoff Unit
- g/t Au
- Dilution Disclosed
- Yes
- Max Dilution
- 3 m
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-10-12T00:00:00.000Z
Reasoning: Strong grade gold sub-intercept, true width not determined.
Positive factors
- strong_grade
Negative factors
- apparent_width_only
Evidence · table
“2.34”
Context: 1.61
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Compositing Transparentpositive
Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Why it applies: cutoff_grade and internal dilution are both stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
Rejected tags
Rejected tags — excluded from scoring because their label or evidence could not be verified.
Apparent Width OnlyRejected · negative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Reason: Interval given as downhole width with no true width or drill orientation.
Evidence · text
“Intervals are downhole lengths; true widths have not yet been determined.”
DDCO26-010Columbia · goldGrade: 0.32Grade Unit: g/tIntercept: 1.5 mView all detailsHide details
Identity
- Hole ID
- DDCO26-010
- Project
- Columbia
- Commodity
- gold
- Region
- usa_mt
- Reported Region
- usa_mt
- Ticker
- SNM
Geometry
- Grade
- 0.32
- Grade Unit
- g/t
- Intercept
- 1.5 m
- From
- 130 m
- To
- 131.5 m
- Hole Depth
- 180.1 m
- Intercept Depth
- 10.83 m
Classification
- Deposit Type
- epithermal
- Program
- mixed
- Sample Type
- drill
- Group ID
- DDCO26-010:130-131.5
- Mining Method
- open_pit
Location
- Easting
- 385033
- Northing
- 5200598.7
- CRS
- NAD83 / UTM Zone 12N
- Elevation
- 1938 m
- Azimuth
- 89 °
- Dip
- -70 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- AGAT Laboratories
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Deleterious
- Deleterious Flag
- No
Compositing
- Cutoff Grade
- 0.3
- Cutoff Unit
- g/t Au
- Dilution Disclosed
- Yes
- Max Dilution
- 3 m
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-10-12T00:00:00.000Z
Reasoning: Weak grade gold intercept, true width not determined.
Positive factors
- weak_grade
Negative factors
- apparent_width_only
Evidence · table
“0.32”
Context: 1.50
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Compositing Transparentpositive
Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Why it applies: cutoff_grade and internal dilution are both stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
Rejected tags
Rejected tags — excluded from scoring because their label or evidence could not be verified.
Apparent Width OnlyRejected · negative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Reason: Interval given as downhole width with no true width or drill orientation.
Evidence · text
“Intervals are downhole lengths; true widths have not yet been determined.”
DDCO26-010Columbia · goldGrade: 2.56Grade Unit: g/tIntercept: 9.13 mView all detailsHide details
Identity
- Hole ID
- DDCO26-010
- Project
- Columbia
- Commodity
- gold
- Region
- usa_mt
- Reported Region
- usa_mt
- Ticker
- SNM
Geometry
- Grade
- 2.56
- Grade Unit
- g/t
- Intercept
- 9.13 m
- From
- 138.5 m
- To
- 147.63 m
- Hole Depth
- 180.1 m
- Intercept Depth
- 10.83 m
Classification
- Deposit Type
- epithermal
- Program
- mixed
- Sample Type
- drill
- Group ID
- DDCO26-010:138.5-147.63
- Mining Method
- open_pit
Location
- Easting
- 385033
- Northing
- 5200598.7
- CRS
- NAD83 / UTM Zone 12N
- Elevation
- 1938 m
- Azimuth
- 89 °
- Dip
- -70 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- AGAT Laboratories
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Deleterious
- Deleterious Flag
- No
Compositing
- Cutoff Grade
- 0.3
- Cutoff Unit
- g/t Au
- Dilution Disclosed
- Yes
- Max Dilution
- 3 m
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-10-12T00:00:00.000Z
Reasoning: Strong grade gold intercept extending mineralization outside the current pit shell, but with low core recovery (77%). True width not determined.
Positive factors
- strong_grade
- step_out_extension
Negative factors
- apparent_width_only
- low_core_recovery
Evidence · table
“2.56”
Context: 9.13
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Compositing Transparentpositive
Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Why it applies: cutoff_grade and internal dilution are both stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
Rejected tags
Rejected tags — excluded from scoring because their label or evidence could not be verified.
Step-Out ExtensionRejected · positive
Mineralization extended beyond the previously known limit.
Reason: Mineralization extended beyond the previously known limit, outside the current pit shell.
Evidence · text
“DDCO26-010 returned 9.1m @ 2.56g/t Au, including 2.0m @ 9.44g/t Au, outside the current Mineral Resource pit shell.”
Apparent Width OnlyRejected · negative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Reason: Interval given as downhole width with no true width or drill orientation.
Evidence · text
“Intervals are downhole lengths; true widths have not yet been determined.”
DDCO26-010Columbia · goldGrade: 9.44Grade Unit: g/tIntercept: 2 mView all detailsHide details
Identity
- Hole ID
- DDCO26-010
- Project
- Columbia
- Commodity
- gold
- Region
- usa_mt
- Reported Region
- usa_mt
- Ticker
- SNM
Geometry
- Grade
- 9.44
- Grade Unit
- g/t
- Intercept
- 2 m
- From
- 144.5 m
- To
- 146.5 m
- Hole Depth
- 180.1 m
- Intercept Depth
- 10.83 m
Classification
- Deposit Type
- epithermal
- Program
- mixed
- Sample Type
- drill
- Group ID
- DDCO26-010:144.5-146.5
- Mining Method
- open_pit
Location
- Easting
- 385033
- Northing
- 5200598.7
- CRS
- NAD83 / UTM Zone 12N
- Elevation
- 1938 m
- Azimuth
- 89 °
- Dip
- -70 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- AGAT Laboratories
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Deleterious
- Deleterious Flag
- No
Compositing
- Cutoff Grade
- 0.3
- Cutoff Unit
- g/t Au
- Dilution Disclosed
- Yes
- Max Dilution
- 3 m
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-10-12T00:00:00.000Z
Reasoning: Bonanza grade gold sub-intercept extending mineralization outside the current pit shell. True width not determined.
Positive factors
- bonanza_intercept
- step_out_extension
Negative factors
- apparent_width_only
Evidence · table
“9.44”
Context: 2.00
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Compositing Transparentpositive
Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Why it applies: cutoff_grade and internal dilution are both stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
Rejected tags
Rejected tags — excluded from scoring because their label or evidence could not be verified.
Bonanza InterceptRejected · positive
Exceptionally high-grade zone, well above the deposit-type norm.
Reason: Exceptionally high-grade zone (9.44 g/t Au) well above the open-pit norm (exceptional >= 5 g/t Au).
Evidence · table
“9.44”
Context: 2.00
Step-Out ExtensionRejected · positive
Mineralization extended beyond the previously known limit.
Reason: Mineralization extended beyond the previously known limit, outside the current pit shell.
Evidence · text
“DDCO26-010 returned 9.1m @ 2.56g/t Au, including 2.0m @ 9.44g/t Au, outside the current Mineral Resource pit shell.”
Apparent Width OnlyRejected · negative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Reason: Interval given as downhole width with no true width or drill orientation.
Evidence · text
“Intervals are downhole lengths; true widths have not yet been determined.”
DDCO26-010Columbia · goldGrade: 0.39Grade Unit: g/tIntercept: 3.07 mView all detailsHide details
Identity
- Hole ID
- DDCO26-010
- Project
- Columbia
- Commodity
- gold
- Region
- usa_mt
- Reported Region
- usa_mt
- Ticker
- SNM
Geometry
- Grade
- 0.39
- Grade Unit
- g/t
- Intercept
- 3.07 m
- From
- 163.5 m
- To
- 166.57 m
- Hole Depth
- 180.1 m
- Intercept Depth
- 10.83 m
Classification
- Deposit Type
- epithermal
- Program
- mixed
- Sample Type
- drill
- Group ID
- DDCO26-010:163.5-166.57
- Mining Method
- open_pit
Location
- Easting
- 385033
- Northing
- 5200598.7
- CRS
- NAD83 / UTM Zone 12N
- Elevation
- 1938 m
- Azimuth
- 89 °
- Dip
- -70 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- AGAT Laboratories
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Deleterious
- Deleterious Flag
- No
Compositing
- Cutoff Grade
- 0.3
- Cutoff Unit
- g/t Au
- Dilution Disclosed
- Yes
- Max Dilution
- 3 m
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-10-12T00:00:00.000Z
Reasoning: Weak grade gold intercept, true width not determined.
Positive factors
- weak_grade
Negative factors
- apparent_width_only
Evidence · table
“0.39”
Context: 3.07
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Compositing Transparentpositive
Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Why it applies: cutoff_grade and internal dilution are both stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
Rejected tags
Rejected tags — excluded from scoring because their label or evidence could not be verified.
Apparent Width OnlyRejected · negative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Reason: Interval given as downhole width with no true width or drill orientation.
Evidence · text
“Intervals are downhole lengths; true widths have not yet been determined.”
DDCO26-011Columbia · goldGrade: 2.19Grade Unit: g/tIntercept: 21.73 mView all detailsHide details
Identity
- Hole ID
- DDCO26-011
- Project
- Columbia
- Commodity
- gold
- Region
- usa_mt
- Reported Region
- usa_mt
- Ticker
- SNM
Geometry
- Grade
- 2.19
- Grade Unit
- g/t
- Intercept
- 21.73 m
- From
- 36 m
- To
- 57.73 m
- Hole Depth
- 249 m
- Intercept Depth
- 36 m
Classification
- Deposit Type
- epithermal
- Program
- mixed
- Sample Type
- drill
- Group ID
- DDCO26-011:36-57.73
- Mining Method
- open_pit
Location
- Easting
- 384956.6
- Northing
- 5200541.7
- CRS
- NAD83 / UTM Zone 12N
- Elevation
- 1953.9 m
- Azimuth
- 109 °
- Dip
- -57 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- AGAT Laboratories
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Deleterious
- Deleterious Flag
- No
Compositing
- Cutoff Grade
- 0.3
- Cutoff Unit
- g/t Au
- Dilution Disclosed
- Yes
- Max Dilution
- 3 m
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-10-12T00:00:00.000Z
Reasoning: Broad, strong grade gold intercept confirming shallow mineralization. True width not determined.
Positive factors
- strong_grade
- broad_intercept
Negative factors
- apparent_width_only
Evidence · table
“2.19”
Context: 21.73
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Compositing Transparentpositive
Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Why it applies: cutoff_grade and internal dilution are both stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
Rejected tags
Rejected tags — excluded from scoring because their label or evidence could not be verified.
Apparent Width OnlyRejected · negative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Reason: Interval given as downhole width with no true width or drill orientation.
Evidence · text
“Intervals are downhole lengths; true widths have not yet been determined.”
DDCO26-011Columbia · goldGrade: 4.31Grade Unit: g/tIntercept: 9 mView all detailsHide details
Identity
- Hole ID
- DDCO26-011
- Project
- Columbia
- Commodity
- gold
- Region
- usa_mt
- Reported Region
- usa_mt
- Ticker
- SNM
Geometry
- Grade
- 4.31
- Grade Unit
- g/t
- Intercept
- 9 m
- From
- 36 m
- To
- 45 m
- Hole Depth
- 249 m
- Intercept Depth
- 36 m
Classification
- Deposit Type
- epithermal
- Program
- mixed
- Sample Type
- drill
- Group ID
- DDCO26-011:36-45
- Mining Method
- open_pit
Location
- Easting
- 384956.6
- Northing
- 5200541.7
- CRS
- NAD83 / UTM Zone 12N
- Elevation
- 1953.9 m
- Azimuth
- 109 °
- Dip
- -57 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- AGAT Laboratories
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Deleterious
- Deleterious Flag
- No
Compositing
- Cutoff Grade
- 0.3
- Cutoff Unit
- g/t Au
- Dilution Disclosed
- Yes
- Max Dilution
- 3 m
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-10-12T00:00:00.000Z
Reasoning: Broad, strong grade gold sub-intercept. True width not determined.
Positive factors
- bonanza_intercept
- broad_intercept
Negative factors
- apparent_width_only
Evidence · table
“4.31”
Context: 9.00
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Compositing Transparentpositive
Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Why it applies: cutoff_grade and internal dilution are both stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
Rejected tags
Rejected tags — excluded from scoring because their label or evidence could not be verified.
Apparent Width OnlyRejected · negative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Reason: Interval given as downhole width with no true width or drill orientation.
Evidence · text
“Intervals are downhole lengths; true widths have not yet been determined.”
DDCO26-011Columbia · goldGrade: 20.75Grade Unit: g/tIntercept: 1.5 mView all detailsHide details
Identity
- Hole ID
- DDCO26-011
- Project
- Columbia
- Commodity
- gold
- Region
- usa_mt
- Reported Region
- usa_mt
- Ticker
- SNM
Geometry
- Grade
- 20.75
- Grade Unit
- g/t
- Intercept
- 1.5 m
- From
- 36 m
- To
- 37.5 m
- Hole Depth
- 249 m
- Intercept Depth
- 36 m
Classification
- Deposit Type
- epithermal
- Program
- mixed
- Sample Type
- drill
- Group ID
- DDCO26-011:36-37.5
- Mining Method
- open_pit
Location
- Easting
- 384956.6
- Northing
- 5200541.7
- CRS
- NAD83 / UTM Zone 12N
- Elevation
- 1953.9 m
- Azimuth
- 109 °
- Dip
- -57 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- AGAT Laboratories
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Deleterious
- Deleterious Flag
- No
Compositing
- Cutoff Grade
- 0.3
- Cutoff Unit
- g/t Au
- Dilution Disclosed
- Yes
- Max Dilution
- 3 m
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-10-12T00:00:00.000Z
Reasoning: Exceptional bonanza grade gold sub-intercept. True width not determined.
Positive factors
- bonanza_intercept
Negative factors
- apparent_width_only
Evidence · table
“20.75”
Context: 1.50
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Compositing Transparentpositive
Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Why it applies: cutoff_grade and internal dilution are both stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
Rejected tags
Rejected tags — excluded from scoring because their label or evidence could not be verified.
Bonanza InterceptRejected · positive
Exceptionally high-grade zone, well above the deposit-type norm.
Reason: Exceptionally high-grade zone (20.75 g/t Au) well above the open-pit norm (exceptional >= 5 g/t Au).
Evidence · table
“20.75”
Context: 1.50
Apparent Width OnlyRejected · negative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Reason: Interval given as downhole width with no true width or drill orientation.
Evidence · text
“Intervals are downhole lengths; true widths have not yet been determined.”
DDCO26-011Columbia · goldGrade: 0.87Grade Unit: g/tIntercept: 1.5 mView all detailsHide details
Identity
- Hole ID
- DDCO26-011
- Project
- Columbia
- Commodity
- gold
- Region
- usa_mt
- Reported Region
- usa_mt
- Ticker
- SNM
Geometry
- Grade
- 0.87
- Grade Unit
- g/t
- Intercept
- 1.5 m
- From
- 72.5 m
- To
- 74 m
- Hole Depth
- 249 m
- Intercept Depth
- 36 m
Classification
- Deposit Type
- epithermal
- Program
- mixed
- Sample Type
- drill
- Group ID
- DDCO26-011:72.5-74
- Mining Method
- open_pit
Location
- Easting
- 384956.6
- Northing
- 5200541.7
- CRS
- NAD83 / UTM Zone 12N
- Elevation
- 1953.9 m
- Azimuth
- 109 °
- Dip
- -57 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- AGAT Laboratories
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Deleterious
- Deleterious Flag
- No
Compositing
- Cutoff Grade
- 0.3
- Cutoff Unit
- g/t Au
- Dilution Disclosed
- Yes
- Max Dilution
- 3 m
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-10-12T00:00:00.000Z
Reasoning: Weak grade gold intercept, true width not determined.
Positive factors
- weak_grade
Negative factors
- apparent_width_only
Evidence · table
“0.87”
Context: 1.50
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Compositing Transparentpositive
Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Why it applies: cutoff_grade and internal dilution are both stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
Rejected tags
Rejected tags — excluded from scoring because their label or evidence could not be verified.
Apparent Width OnlyRejected · negative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Reason: Interval given as downhole width with no true width or drill orientation.
Evidence · text
“Intervals are downhole lengths; true widths have not yet been determined.”
DDCO26-011Columbia · goldGrade: 0.56Grade Unit: g/tIntercept: 1.44 mView all detailsHide details
Identity
- Hole ID
- DDCO26-011
- Project
- Columbia
- Commodity
- gold
- Region
- usa_mt
- Reported Region
- usa_mt
- Ticker
- SNM
Geometry
- Grade
- 0.56
- Grade Unit
- g/t
- Intercept
- 1.44 m
- From
- 78.06 m
- To
- 79.5 m
- Hole Depth
- 249 m
- Intercept Depth
- 36 m
Classification
- Deposit Type
- epithermal
- Program
- mixed
- Sample Type
- drill
- Group ID
- DDCO26-011:78.06-79.5
- Mining Method
- open_pit
Location
- Easting
- 384956.6
- Northing
- 5200541.7
- CRS
- NAD83 / UTM Zone 12N
- Elevation
- 1953.9 m
- Azimuth
- 109 °
- Dip
- -57 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- AGAT Laboratories
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Deleterious
- Deleterious Flag
- No
Compositing
- Cutoff Grade
- 0.3
- Cutoff Unit
- g/t Au
- Dilution Disclosed
- Yes
- Max Dilution
- 3 m
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-10-12T00:00:00.000Z
Reasoning: Weak grade gold intercept with low core recovery (97%), true width not determined.
Positive factors
- weak_grade
Negative factors
- apparent_width_only
- low_core_recovery
Evidence · table
“0.56”
Context: 1.44
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Compositing Transparentpositive
Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Why it applies: cutoff_grade and internal dilution are both stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
Rejected tags
Rejected tags — excluded from scoring because their label or evidence could not be verified.
Apparent Width OnlyRejected · negative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Reason: Interval given as downhole width with no true width or drill orientation.
Evidence · text
“Intervals are downhole lengths; true widths have not yet been determined.”
DDCO26-011Columbia · goldGrade: 0.96Grade Unit: g/tIntercept: 1.5 mView all detailsHide details
Identity
- Hole ID
- DDCO26-011
- Project
- Columbia
- Commodity
- gold
- Region
- usa_mt
- Reported Region
- usa_mt
- Ticker
- SNM
Geometry
- Grade
- 0.96
- Grade Unit
- g/t
- Intercept
- 1.5 m
- From
- 85.5 m
- To
- 87 m
- Hole Depth
- 249 m
- Intercept Depth
- 36 m
Classification
- Deposit Type
- epithermal
- Program
- mixed
- Sample Type
- drill
- Group ID
- DDCO26-011:85.5-87
- Mining Method
- open_pit
Location
- Easting
- 384956.6
- Northing
- 5200541.7
- CRS
- NAD83 / UTM Zone 12N
- Elevation
- 1953.9 m
- Azimuth
- 109 °
- Dip
- -57 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- AGAT Laboratories
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Deleterious
- Deleterious Flag
- No
Compositing
- Cutoff Grade
- 0.3
- Cutoff Unit
- g/t Au
- Dilution Disclosed
- Yes
- Max Dilution
- 3 m
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-10-12T00:00:00.000Z
Reasoning: Weak grade gold intercept, true width not determined.
Positive factors
- weak_grade
Negative factors
- apparent_width_only
Evidence · table
“0.96”
Context: 1.50
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Compositing Transparentpositive
Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Why it applies: cutoff_grade and internal dilution are both stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
Rejected tags
Rejected tags — excluded from scoring because their label or evidence could not be verified.
Apparent Width OnlyRejected · negative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Reason: Interval given as downhole width with no true width or drill orientation.
Evidence · text
“Intervals are downhole lengths; true widths have not yet been determined.”
DDCO26-011Columbia · goldGrade: 0.37Grade Unit: g/tIntercept: 1.41 mView all detailsHide details
Identity
- Hole ID
- DDCO26-011
- Project
- Columbia
- Commodity
- gold
- Region
- usa_mt
- Reported Region
- usa_mt
- Ticker
- SNM
Geometry
- Grade
- 0.37
- Grade Unit
- g/t
- Intercept
- 1.41 m
- From
- 91.09 m
- To
- 92.5 m
- Hole Depth
- 249 m
- Intercept Depth
- 36 m
Classification
- Deposit Type
- epithermal
- Program
- mixed
- Sample Type
- drill
- Group ID
- DDCO26-011:91.09-92.5
- Mining Method
- open_pit
Location
- Easting
- 384956.6
- Northing
- 5200541.7
- CRS
- NAD83 / UTM Zone 12N
- Elevation
- 1953.9 m
- Azimuth
- 109 °
- Dip
- -57 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- AGAT Laboratories
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Deleterious
- Deleterious Flag
- No
Compositing
- Cutoff Grade
- 0.3
- Cutoff Unit
- g/t Au
- Dilution Disclosed
- Yes
- Max Dilution
- 3 m
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-10-12T00:00:00.000Z
Reasoning: Weak grade gold intercept with low core recovery (99%), true width not determined.
Positive factors
- weak_grade
Negative factors
- apparent_width_only
- low_core_recovery
Evidence · table
“0.37”
Context: 1.41
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Compositing Transparentpositive
Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Why it applies: cutoff_grade and internal dilution are both stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
Rejected tags
Rejected tags — excluded from scoring because their label or evidence could not be verified.
Apparent Width OnlyRejected · negative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Reason: Interval given as downhole width with no true width or drill orientation.
Evidence · text
“Intervals are downhole lengths; true widths have not yet been determined.”
DDCO26-011Columbia · goldGrade: 1.06Grade Unit: g/tIntercept: 3 mView all detailsHide details
Identity
- Hole ID
- DDCO26-011
- Project
- Columbia
- Commodity
- gold
- Region
- usa_mt
- Reported Region
- usa_mt
- Ticker
- SNM
Geometry
- Grade
- 1.06
- Grade Unit
- g/t
- Intercept
- 3 m
- From
- 106 m
- To
- 109 m
- Hole Depth
- 249 m
- Intercept Depth
- 36 m
Classification
- Deposit Type
- epithermal
- Program
- mixed
- Sample Type
- drill
- Group ID
- DDCO26-011:106-109
- Mining Method
- open_pit
Location
- Easting
- 384956.6
- Northing
- 5200541.7
- CRS
- NAD83 / UTM Zone 12N
- Elevation
- 1953.9 m
- Azimuth
- 109 °
- Dip
- -57 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- AGAT Laboratories
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Deleterious
- Deleterious Flag
- No
Compositing
- Cutoff Grade
- 0.3
- Cutoff Unit
- g/t Au
- Dilution Disclosed
- Yes
- Max Dilution
- 3 m
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-10-12T00:00:00.000Z
Reasoning: Moderate grade gold intercept, true width not determined.
Positive factors
- moderate_grade
Negative factors
- apparent_width_only
Evidence · table
“1.06”
Context: 3.00
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Compositing Transparentpositive
Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Why it applies: cutoff_grade and internal dilution are both stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
Rejected tags
Rejected tags — excluded from scoring because their label or evidence could not be verified.
Apparent Width OnlyRejected · negative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Reason: Interval given as downhole width with no true width or drill orientation.
Evidence · text
“Intervals are downhole lengths; true widths have not yet been determined.”
DDCO26-011Columbia · goldGrade: 3.15Grade Unit: g/tIntercept: 2.84 mView all detailsHide details
Identity
- Hole ID
- DDCO26-011
- Project
- Columbia
- Commodity
- gold
- Region
- usa_mt
- Reported Region
- usa_mt
- Ticker
- SNM
Geometry
- Grade
- 3.15
- Grade Unit
- g/t
- Intercept
- 2.84 m
- From
- 139.16 m
- To
- 142 m
- Hole Depth
- 249 m
- Intercept Depth
- 36 m
Classification
- Deposit Type
- epithermal
- Program
- mixed
- Sample Type
- drill
- Group ID
- DDCO26-011:139.16-142
- Mining Method
- open_pit
Location
- Easting
- 384956.6
- Northing
- 5200541.7
- CRS
- NAD83 / UTM Zone 12N
- Elevation
- 1953.9 m
- Azimuth
- 109 °
- Dip
- -57 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- AGAT Laboratories
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Deleterious
- Deleterious Flag
- No
Compositing
- Cutoff Grade
- 0.3
- Cutoff Unit
- g/t Au
- Dilution Disclosed
- Yes
- Max Dilution
- 3 m
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-10-12T00:00:00.000Z
Reasoning: Strong grade gold intercept, true width not determined.
Positive factors
- strong_grade
Negative factors
- apparent_width_only
Evidence · table
“3.15”
Context: 2.84
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Compositing Transparentpositive
Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Why it applies: cutoff_grade and internal dilution are both stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
Rejected tags
Rejected tags — excluded from scoring because their label or evidence could not be verified.
Apparent Width OnlyRejected · negative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Reason: Interval given as downhole width with no true width or drill orientation.
Evidence · text
“Intervals are downhole lengths; true widths have not yet been determined.”
DDCO26-011Columbia · goldGrade: 1.15Grade Unit: g/tIntercept: 9 mView all detailsHide details
Identity
- Hole ID
- DDCO26-011
- Project
- Columbia
- Commodity
- gold
- Region
- usa_mt
- Reported Region
- usa_mt
- Ticker
- SNM
Geometry
- Grade
- 1.15
- Grade Unit
- g/t
- Intercept
- 9 m
- From
- 153 m
- To
- 162 m
- Hole Depth
- 249 m
- Intercept Depth
- 36 m
Classification
- Deposit Type
- epithermal
- Program
- mixed
- Sample Type
- drill
- Group ID
- DDCO26-011:153-162
- Mining Method
- open_pit
Location
- Easting
- 384956.6
- Northing
- 5200541.7
- CRS
- NAD83 / UTM Zone 12N
- Elevation
- 1953.9 m
- Azimuth
- 109 °
- Dip
- -57 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- AGAT Laboratories
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Deleterious
- Deleterious Flag
- No
Compositing
- Cutoff Grade
- 0.3
- Cutoff Unit
- g/t Au
- Dilution Disclosed
- Yes
- Max Dilution
- 3 m
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-10-12T00:00:00.000Z
Reasoning: Moderate grade gold intercept, true width not determined.
Positive factors
- moderate_grade
Negative factors
- apparent_width_only
Evidence · table
“1.15”
Context: 9.00
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Compositing Transparentpositive
Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Why it applies: cutoff_grade and internal dilution are both stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
Rejected tags
Rejected tags — excluded from scoring because their label or evidence could not be verified.
Apparent Width OnlyRejected · negative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Reason: Interval given as downhole width with no true width or drill orientation.
Evidence · text
“Intervals are downhole lengths; true widths have not yet been determined.”
DDCO26-011Columbia · goldGrade: 3.75Grade Unit: g/tIntercept: 1.5 mView all detailsHide details
Identity
- Hole ID
- DDCO26-011
- Project
- Columbia
- Commodity
- gold
- Region
- usa_mt
- Reported Region
- usa_mt
- Ticker
- SNM
Geometry
- Grade
- 3.75
- Grade Unit
- g/t
- Intercept
- 1.5 m
- From
- 160.5 m
- To
- 162 m
- Hole Depth
- 249 m
- Intercept Depth
- 36 m
Classification
- Deposit Type
- epithermal
- Program
- mixed
- Sample Type
- drill
- Group ID
- DDCO26-011:160.5-162
- Mining Method
- open_pit
Location
- Easting
- 384956.6
- Northing
- 5200541.7
- CRS
- NAD83 / UTM Zone 12N
- Elevation
- 1953.9 m
- Azimuth
- 109 °
- Dip
- -57 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- AGAT Laboratories
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Deleterious
- Deleterious Flag
- No
Compositing
- Cutoff Grade
- 0.3
- Cutoff Unit
- g/t Au
- Dilution Disclosed
- Yes
- Max Dilution
- 3 m
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-10-12T00:00:00.000Z
Reasoning: Strong grade gold sub-intercept, true width not determined.
Positive factors
- strong_grade
Negative factors
- apparent_width_only
Evidence · table
“3.75”
Context: 1.50
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Compositing Transparentpositive
Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Why it applies: cutoff_grade and internal dilution are both stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
Rejected tags
Rejected tags — excluded from scoring because their label or evidence could not be verified.
Apparent Width OnlyRejected · negative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Reason: Interval given as downhole width with no true width or drill orientation.
Evidence · text
“Intervals are downhole lengths; true widths have not yet been determined.”
DDCO26-011Columbia · goldGrade: 1.18Grade Unit: g/tIntercept: 21.33 mView all detailsHide details
Identity
- Hole ID
- DDCO26-011
- Project
- Columbia
- Commodity
- gold
- Region
- usa_mt
- Reported Region
- usa_mt
- Ticker
- SNM
Geometry
- Grade
- 1.18
- Grade Unit
- g/t
- Intercept
- 21.33 m
- From
- 205.17 m
- To
- 226.5 m
- Hole Depth
- 249 m
- Intercept Depth
- 36 m
Classification
- Deposit Type
- epithermal
- Program
- mixed
- Sample Type
- drill
- Group ID
- DDCO26-011:205.17-226.5
- Mining Method
- open_pit
Location
- Easting
- 384956.6
- Northing
- 5200541.7
- CRS
- NAD83 / UTM Zone 12N
- Elevation
- 1953.9 m
- Azimuth
- 109 °
- Dip
- -57 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- AGAT Laboratories
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Deleterious
- Deleterious Flag
- No
Compositing
- Cutoff Grade
- 0.3
- Cutoff Unit
- g/t Au
- Dilution Disclosed
- Yes
- Max Dilution
- 3 m
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-10-12T00:00:00.000Z
Reasoning: Broad, moderate grade gold intercept with low core recovery (91%). True width not determined.
Positive factors
- moderate_grade
- broad_intercept
Negative factors
- apparent_width_only
- low_core_recovery
Evidence · table
“1.18”
Context: 21.33
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Compositing Transparentpositive
Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Why it applies: cutoff_grade and internal dilution are both stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
Rejected tags
Rejected tags — excluded from scoring because their label or evidence could not be verified.
Apparent Width OnlyRejected · negative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Reason: Interval given as downhole width with no true width or drill orientation.
Evidence · text
“Intervals are downhole lengths; true widths have not yet been determined.”
DDCO26-011Columbia · goldGrade: 5.75Grade Unit: g/tIntercept: 2 mView all detailsHide details
Identity
- Hole ID
- DDCO26-011
- Project
- Columbia
- Commodity
- gold
- Region
- usa_mt
- Reported Region
- usa_mt
- Ticker
- SNM
Geometry
- Grade
- 5.75
- Grade Unit
- g/t
- Intercept
- 2 m
- From
- 215.5 m
- To
- 217.5 m
- Hole Depth
- 249 m
- Intercept Depth
- 36 m
Classification
- Deposit Type
- epithermal
- Program
- mixed
- Sample Type
- drill
- Group ID
- DDCO26-011:215.5-217.5
- Mining Method
- open_pit
Location
- Easting
- 384956.6
- Northing
- 5200541.7
- CRS
- NAD83 / UTM Zone 12N
- Elevation
- 1953.9 m
- Azimuth
- 109 °
- Dip
- -57 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- AGAT Laboratories
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Deleterious
- Deleterious Flag
- No
Compositing
- Cutoff Grade
- 0.3
- Cutoff Unit
- g/t Au
- Dilution Disclosed
- Yes
- Max Dilution
- 3 m
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-10-12T00:00:00.000Z
Reasoning: Bonanza grade gold sub-intercept. True width not determined.
Positive factors
- bonanza_intercept
Negative factors
- apparent_width_only
Evidence · table
“5.75”
Context: 2.00
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Compositing Transparentpositive
Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Why it applies: cutoff_grade and internal dilution are both stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
Rejected tags
Rejected tags — excluded from scoring because their label or evidence could not be verified.
Bonanza InterceptRejected · positive
Exceptionally high-grade zone, well above the deposit-type norm.
Reason: Exceptionally high-grade zone (5.75 g/t Au) well above the open-pit norm (exceptional >= 5 g/t Au).
Evidence · table
“5.75”
Context: 2.00
Apparent Width OnlyRejected · negative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Reason: Interval given as downhole width with no true width or drill orientation.
Evidence · text
“Intervals are downhole lengths; true widths have not yet been determined.”
DDCO26-011Columbia · goldGrade: 3.55Grade Unit: g/tIntercept: 1.5 mView all detailsHide details
Identity
- Hole ID
- DDCO26-011
- Project
- Columbia
- Commodity
- gold
- Region
- usa_mt
- Reported Region
- usa_mt
- Ticker
- SNM
Geometry
- Grade
- 3.55
- Grade Unit
- g/t
- Intercept
- 1.5 m
- From
- 220.5 m
- To
- 222 m
- Hole Depth
- 249 m
- Intercept Depth
- 36 m
Classification
- Deposit Type
- epithermal
- Program
- mixed
- Sample Type
- drill
- Group ID
- DDCO26-011:220.5-222
- Mining Method
- open_pit
Location
- Easting
- 384956.6
- Northing
- 5200541.7
- CRS
- NAD83 / UTM Zone 12N
- Elevation
- 1953.9 m
- Azimuth
- 109 °
- Dip
- -57 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- AGAT Laboratories
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Deleterious
- Deleterious Flag
- No
Compositing
- Cutoff Grade
- 0.3
- Cutoff Unit
- g/t Au
- Dilution Disclosed
- Yes
- Max Dilution
- 3 m
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-10-12T00:00:00.000Z
Reasoning: Strong grade gold sub-intercept. True width not determined.
Positive factors
- strong_grade
Negative factors
- apparent_width_only
Evidence · table
“3.55”
Context: 1.50
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Compositing Transparentpositive
Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Why it applies: cutoff_grade and internal dilution are both stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
Rejected tags
Rejected tags — excluded from scoring because their label or evidence could not be verified.
Apparent Width OnlyRejected · negative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Reason: Interval given as downhole width with no true width or drill orientation.
Evidence · text
“Intervals are downhole lengths; true widths have not yet been determined.”
DDCO26-011Columbia · goldGrade: 0.64Grade Unit: g/tIntercept: 9.5 mView all detailsHide details
Identity
- Hole ID
- DDCO26-011
- Project
- Columbia
- Commodity
- gold
- Region
- usa_mt
- Reported Region
- usa_mt
- Ticker
- SNM
Geometry
- Grade
- 0.64
- Grade Unit
- g/t
- Intercept
- 9.5 m
- From
- 237 m
- To
- 246.5 m
- Hole Depth
- 249 m
- Intercept Depth
- 36 m
Classification
- Deposit Type
- epithermal
- Program
- mixed
- Sample Type
- drill
- Group ID
- DDCO26-011:237-246.5
- Mining Method
- open_pit
Location
- Easting
- 384956.6
- Northing
- 5200541.7
- CRS
- NAD83 / UTM Zone 12N
- Elevation
- 1953.9 m
- Azimuth
- 109 °
- Dip
- -57 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- AGAT Laboratories
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Deleterious
- Deleterious Flag
- No
Compositing
- Cutoff Grade
- 0.3
- Cutoff Unit
- g/t Au
- Dilution Disclosed
- Yes
- Max Dilution
- 3 m
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-10-12T00:00:00.000Z
Reasoning: Weak grade gold intercept extending mineralization outside the current pit shell, with low core recovery (85%). True width not determined.
Positive factors
- weak_grade
- step_out_extension
Negative factors
- apparent_width_only
- low_core_recovery
Evidence · table
“0.64”
Context: 9.50
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Compositing Transparentpositive
Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Why it applies: cutoff_grade and internal dilution are both stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
Rejected tags
Rejected tags — excluded from scoring because their label or evidence could not be verified.
Step-Out ExtensionRejected · positive
Mineralization extended beyond the previously known limit.
Reason: Mineralization extended beyond the previously known limit, outside the current pit shell.
Evidence · text
“a final intercept of 9.5m @ 0.64g/t Au from 237.0m, outside the pit shell, extends to within 2.5m of the end of the hole.”
Apparent Width OnlyRejected · negative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Reason: Interval given as downhole width with no true width or drill orientation.
Evidence · text
“Intervals are downhole lengths; true widths have not yet been determined.”
How Atlas produces this analysis
Minestarters Atlas uses automated extraction to summarize mining announcements, identify reported measurements, and classify supporting evidence. Sentiment reflects the extracted narrative and classification rules; it is an interpretation, not a reported measurement. Evidence quotes and context are provided where available. Missing data, low-confidence results, and review flags indicate limitations. Check the original publisher announcement before relying on an interpretation.