Silver North Outlines Largest Exploration Program to Date at Haldane Following 2025 Success
Original announcement by tmx on
- Company
- Silver North Resources Ltd.
- Ticker
- SNAG
- Exchange
- TSX
- Region
- Yukon Territory
- Primary commodity
- Silver
- Secondary commodities
- Gold, Lead, Zinc, Copper, Antimony
- Document categories
- Drill results, Capital raise
- Extracted
- 2026-08-24 10:49:04 UTC
Analysis by Minestarters Atlas
Minestarters Atlas analysis
Summary
Silver North Resources announced high-grade drill results from its 2025 program at the Haldane project, including 13.15 meters at 818 g/t silver in hole HLD25-31, which expanded the Main Fault mineralization. Following successful financings totaling $13.85 million, the company is fully funded for its largest exploration program to date in 2026, focusing on further expansion at Haldane and follow-up work at the Veronica property.
Reasoning: Silver North Resources reported exceptional high-grade silver drill results from its 2025 Haldane program, significantly expanding known mineralization. This success, combined with recent financings, enables the company to launch its largest exploration program to date, indicating strong future potential despite some metallurgical and reporting uncertainties.
Positive factors
- High-grade silver intercepts
- Expansion of mineralization along strike and downdip
- Company is fully funded for two years
- Largest exploration program planned for 2026
- Qualified Person sign-off on technical information
Negative factors
- Metal equivalent assumptions not necessarily reflective of property metallurgy
- No metallurgical work reported on the property
- True widths of intercepts are unknown
- Cut-off grade for compositing is undisclosed
Facts used in scoring: 162
Classification and evidence
Bonanza Interceptpositive
Exceptionally high-grade zone, well above the deposit-type norm.
Why it applies: HLD25-31 includes sub-intervals with silver grades of 2014 g/t and 1112 g/t, which are well above the exceptional threshold of 500 g/t for silver.
Evidence · table
“2014”
Context: 3.20
Step-Out Extensionpositive
Mineralization extended beyond the previously known limit.
Why it applies: The company successfully expanded Main Fault mineralization to over 100 metres along strike and 150 metres downdip.
Evidence · text
“Successfully expanded Main Fault mineralization to over 100 metres along strike and 150 metres downdip.”
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: Mr. Jason Weber, P.Geo., President and CEO of Silver North Resources Ltd. is a Qualified Person as defined by National Instrument 43-101, and supervised the preparation of the technical information.
Evidence · text
“Mr. Jason Weber, P.Geo., President and CEO of Silver North Resources Ltd. is a Qualified Person as defined by National Instrument 43-101. Mr. Weber supervised the preparation of the technical information contained in this release.”
Apparent Width Onlynegative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Why it applies: The document explicitly states that 'True widths are unknown' for the reported drill intercepts.
Evidence · text
“True widths are unknown.”
Metal Equivalent Opaquenegative
Metal equivalent grade reported without disclosing the price, recovery, or payability assumptions used.
Why it applies: While metal equivalent assumptions are disclosed, the document states that these are 'not necessarily reflective of metallurgy on the property' and 'No metallurgical work has been reported on the property', making the equivalent grades opaque for this specific project.
Evidence · text
“Silver-equivalent values are calculated assuming typical recoveries based on metallurgical studies conducted on a range of analogous vein deposits and are not necessarily reflective of metallurgy on the property. No metallurgical work has been reported on the property.”
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: The document does not state the cut-off grade used for compositing the reported drill intervals.
Evidence · text
“Table 1: 2025 Drilling – Significant Results”
Exploration Drillingneutral · Story-specific tag
No canonical definition is currently available.
Why it applies: The document outlines the 'Largest Exploration Program to Date' and focuses on 'expansion of Main Fault target on strike and downdip' and 'test additional targets'.
Evidence · text
“Silver North Outlines Largest Exploration Program to Date at Haldane Following 2025 Success”
Polymetallicneutral · Story-specific tag
No canonical definition is currently available.
Why it applies: Drill results and surface samples report grades for multiple metals including silver, gold, lead, zinc, copper, and antimony.
Evidence · table
“Ag (g/t)”
Context: 13.15
Extracted facts
Stored fact records: 162. Some facts used in scoring do not have a stored record.
Drill Results (162)
HLD25-31Haldane · silverGrade: 818Grade Unit: g/tIntercept: 13.15 mView all detailsHide details
Identity
- Hole ID
- HLD25-31
- Project
- Haldane
- Commodity
- silver
- Ticker
- SNAG
Geometry
- Grade
- 818
- Grade Unit
- g/t
- Intercept
- 13.15 m
- From
- 249.9 m
- To
- 263.05 m
Classification
- Sample Type
- drill
- Group ID
- HLD25-31:249.90-263.05
QA/QC
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
Metal Equivalent
- Metal Eq. Grade
- 896
- Metal Eq. Unit
- g/t Silver Eq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-19T00:00:00.000Z
Reasoning: This intercept represents an exceptional silver grade over a significant width, contributing to the expansion of the Main Fault mineralization, though true width and property-specific metallurgical assumptions for the equivalent grade are not provided.
Positive factors
- Exceptional silver grade (818 g/t)
- Significant intercept length (13.15 m)
- Contributes to expansion of mineralization
Negative factors
- True width unknown
- Metal equivalent assumptions not property-specific
- Cut-off grade undisclosed
Evidence · table
“818”
Context: 13.15
HLD25-31Haldane · goldGrade: 1.39Grade Unit: g/tIntercept: 13.15 mView all detailsHide details
Identity
- Hole ID
- HLD25-31
- Project
- Haldane
- Commodity
- gold
- Ticker
- SNAG
Geometry
- Grade
- 1.39
- Grade Unit
- g/t
- Intercept
- 13.15 m
- From
- 249.9 m
- To
- 263.05 m
Classification
- Sample Type
- drill
- Group ID
- HLD25-31:249.90-263.05
QA/QC
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-19T00:00:00.000Z
Reasoning: The gold grade is moderate over a significant length, adding value to the polymetallic intercept, and is noted as elevated throughout the interval.
Positive factors
- Moderate gold grade over significant length
- Elevated gold grades observed throughout the interval
Negative factors
- True width unknown
- Cut-off grade undisclosed
Evidence · table
“1.39”
Context: 13.15
HLD25-31Haldane · leadGrade: 2.54Grade Unit: %Intercept: 13.15 mView all detailsHide details
Identity
- Hole ID
- HLD25-31
- Project
- Haldane
- Commodity
- lead
- Ticker
- SNAG
Geometry
- Grade
- 2.54
- Grade Unit
- %
- Intercept
- 13.15 m
- From
- 249.9 m
- To
- 263.05 m
Classification
- Sample Type
- drill
- Group ID
- HLD25-31:249.90-263.05
QA/QC
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-19T00:00:00.000Z
Reasoning: The lead grade is moderate over a significant length, contributing to the polymetallic nature of the intercept.
Positive factors
- Moderate lead grade over significant length
Negative factors
- True width unknown
- Cut-off grade undisclosed
Evidence · table
“2.54”
Context: 13.15
HLD25-31Haldane · zincGrade: 0.98Grade Unit: %Intercept: 13.15 mView all detailsHide details
Identity
- Hole ID
- HLD25-31
- Project
- Haldane
- Commodity
- zinc
- Ticker
- SNAG
Geometry
- Grade
- 0.98
- Grade Unit
- %
- Intercept
- 13.15 m
- From
- 249.9 m
- To
- 263.05 m
Classification
- Sample Type
- drill
- Group ID
- HLD25-31:249.90-263.05
QA/QC
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-19T00:00:00.000Z
Reasoning: The zinc grade is weak but contributes to the polymetallic nature of the intercept.
Positive factors
- Presence of zinc as a byproduct
Negative factors
- True width unknown
- Cut-off grade undisclosed
Evidence · table
“0.98”
Context: 13.15
HLD25-31Haldane · silverGrade: 2014Grade Unit: g/tIntercept: 3.2 mView all detailsHide details
Identity
- Hole ID
- HLD25-31
- Project
- Haldane
- Commodity
- silver
- Ticker
- SNAG
Geometry
- Grade
- 2014
- Grade Unit
- g/t
- Intercept
- 3.2 m
- From
- 251.8 m
- To
- 255 m
Classification
- Sample Type
- drill
- Group ID
- HLD25-31:251.80-255.00
QA/QC
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
Metal Equivalent
- Metal Eq. Grade
- 2055
- Metal Eq. Unit
- g/t Silver Eq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-19T00:00:00.000Z
Reasoning: This sub-interval shows bonanza-grade silver over a moderate width, significantly enhancing the overall intercept's value.
Positive factors
- Exceptional silver grade (2014 g/t)
- High-grade sub-interval within a broader intercept
Negative factors
- True width unknown
- Metal equivalent assumptions not property-specific
- Cut-off grade undisclosed
Evidence · table
“2014”
Context: 3.20
HLD25-31Haldane · goldGrade: 1.72Grade Unit: g/tIntercept: 3.2 mView all detailsHide details
Identity
- Hole ID
- HLD25-31
- Project
- Haldane
- Commodity
- gold
- Ticker
- SNAG
Geometry
- Grade
- 1.72
- Grade Unit
- g/t
- Intercept
- 3.2 m
- From
- 251.8 m
- To
- 255 m
Classification
- Sample Type
- drill
- Group ID
- HLD25-31:251.80-255.00
QA/QC
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-19T00:00:00.000Z
Reasoning: The gold grade is moderate within this high-grade sub-interval, contributing to the overall polymetallic value.
Positive factors
- Moderate gold grade within a high-grade sub-interval
Negative factors
- True width unknown
- Cut-off grade undisclosed
Evidence · table
“1.72”
Context: 3.20
HLD25-31Haldane · leadGrade: 4.73Grade Unit: %Intercept: 3.2 mView all detailsHide details
Identity
- Hole ID
- HLD25-31
- Project
- Haldane
- Commodity
- lead
- Ticker
- SNAG
Geometry
- Grade
- 4.73
- Grade Unit
- %
- Intercept
- 3.2 m
- From
- 251.8 m
- To
- 255 m
Classification
- Sample Type
- drill
- Group ID
- HLD25-31:251.80-255.00
QA/QC
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-19T00:00:00.000Z
Reasoning: The lead grade is moderate within this high-grade sub-interval, contributing to the overall polymetallic value.
Positive factors
- Moderate lead grade within a high-grade sub-interval
Negative factors
- True width unknown
- Cut-off grade undisclosed
Evidence · table
“4.73”
Context: 3.20
HLD25-31Haldane · zincGrade: 1.1Grade Unit: %Intercept: 3.2 mView all detailsHide details
Identity
- Hole ID
- HLD25-31
- Project
- Haldane
- Commodity
- zinc
- Ticker
- SNAG
Geometry
- Grade
- 1.1
- Grade Unit
- %
- Intercept
- 3.2 m
- From
- 251.8 m
- To
- 255 m
Classification
- Sample Type
- drill
- Group ID
- HLD25-31:251.80-255.00
QA/QC
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-19T00:00:00.000Z
Reasoning: The zinc grade is weak but contributes to the polymetallic nature of the sub-interval.
Positive factors
- Presence of zinc as a byproduct
Negative factors
- True width unknown
- Cut-off grade undisclosed
Evidence · table
“1.10”
Context: 3.20
HLD25-31Haldane · silverGrade: 1112Grade Unit: g/tIntercept: 1.25 mView all detailsHide details
Identity
- Hole ID
- HLD25-31
- Project
- Haldane
- Commodity
- silver
- Ticker
- SNAG
Geometry
- Grade
- 1112
- Grade Unit
- g/t
- Intercept
- 1.25 m
- From
- 256.1 m
- To
- 257.35 m
Classification
- Sample Type
- drill
- Group ID
- HLD25-31:256.10-257.35
QA/QC
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
Metal Equivalent
- Metal Eq. Grade
- 1446
- Metal Eq. Unit
- g/t Silver Eq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-19T00:00:00.000Z
Reasoning: This sub-interval shows bonanza-grade silver over a narrow width, significantly enhancing the overall intercept's value.
Positive factors
- Exceptional silver grade (1112 g/t)
- High-grade sub-interval within a broader intercept
Negative factors
- True width unknown
- Metal equivalent assumptions not property-specific
- Cut-off grade undisclosed
Evidence · table
“1112”
Context: 1.25
HLD25-31Haldane · goldGrade: 4.61Grade Unit: g/tIntercept: 1.25 mView all detailsHide details
Identity
- Hole ID
- HLD25-31
- Project
- Haldane
- Commodity
- gold
- Ticker
- SNAG
Geometry
- Grade
- 4.61
- Grade Unit
- g/t
- Intercept
- 1.25 m
- From
- 256.1 m
- To
- 257.35 m
Classification
- Sample Type
- drill
- Group ID
- HLD25-31:256.10-257.35
QA/QC
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-19T00:00:00.000Z
Reasoning: The gold grade is strong within this high-grade sub-interval, contributing significantly to the overall polymetallic value.
Positive factors
- Strong gold grade within a high-grade sub-interval
Negative factors
- True width unknown
- Cut-off grade undisclosed
Evidence · table
“4.61”
Context: 1.25
HLD25-31Haldane · leadGrade: 7.11Grade Unit: %Intercept: 1.25 mView all detailsHide details
Identity
- Hole ID
- HLD25-31
- Project
- Haldane
- Commodity
- lead
- Ticker
- SNAG
Geometry
- Grade
- 7.11
- Grade Unit
- %
- Intercept
- 1.25 m
- From
- 256.1 m
- To
- 257.35 m
Classification
- Sample Type
- drill
- Group ID
- HLD25-31:256.10-257.35
QA/QC
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-19T00:00:00.000Z
Reasoning: The lead grade is strong within this high-grade sub-interval, contributing significantly to the overall polymetallic value.
Positive factors
- Strong lead grade within a high-grade sub-interval
Negative factors
- True width unknown
- Cut-off grade undisclosed
Evidence · table
“7.11”
Context: 1.25
HLD25-31Haldane · zincGrade: 1.51Grade Unit: %Intercept: 1.25 mView all detailsHide details
Identity
- Hole ID
- HLD25-31
- Project
- Haldane
- Commodity
- zinc
- Ticker
- SNAG
Geometry
- Grade
- 1.51
- Grade Unit
- %
- Intercept
- 1.25 m
- From
- 256.1 m
- To
- 257.35 m
Classification
- Sample Type
- drill
- Group ID
- HLD25-31:256.10-257.35
QA/QC
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-19T00:00:00.000Z
Reasoning: The zinc grade is weak but contributes to the polymetallic nature of the sub-interval.
Positive factors
- Presence of zinc as a byproduct
Negative factors
- True width unknown
- Cut-off grade undisclosed
Evidence · table
“1.51”
Context: 1.25
HLD25-32Haldane · silverGrade: 160Grade Unit: g/tIntercept: 22.65 mView all detailsHide details
Identity
- Hole ID
- HLD25-32
- Project
- Haldane
- Commodity
- silver
- Ticker
- SNAG
Geometry
- Grade
- 160
- Grade Unit
- g/t
- Intercept
- 22.65 m
- From
- 153 m
- To
- 175.65 m
Classification
- Sample Type
- drill
- Group ID
- HLD25-32:153.00-175.65
QA/QC
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
Metal Equivalent
- Metal Eq. Grade
- 187
- Metal Eq. Unit
- g/t Silver Eq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-19T00:00:00.000Z
Reasoning: This intercept shows a moderate silver grade over a significant width, contributing to the overall mineralization footprint.
Positive factors
- Moderate silver grade
- Significant intercept length (22.65 m)
Negative factors
- True width unknown
- Metal equivalent assumptions not property-specific
- Cut-off grade undisclosed
Evidence · table
“160”
Context: 22.65
HLD25-32Haldane · goldGrade: 0.23Grade Unit: g/tIntercept: 22.65 mView all detailsHide details
Identity
- Hole ID
- HLD25-32
- Project
- Haldane
- Commodity
- gold
- Ticker
- SNAG
Geometry
- Grade
- 0.23
- Grade Unit
- g/t
- Intercept
- 22.65 m
- From
- 153 m
- To
- 175.65 m
Classification
- Sample Type
- drill
- Group ID
- HLD25-32:153.00-175.65
QA/QC
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-19T00:00:00.000Z
Reasoning: The gold grade is weak but contributes to the polymetallic nature of the intercept.
Positive factors
- Presence of gold as a byproduct
Negative factors
- True width unknown
- Cut-off grade undisclosed
Evidence · table
“0.23”
Context: 22.65
HLD25-32Haldane · leadGrade: 0.75Grade Unit: %Intercept: 22.65 mView all detailsHide details
Identity
- Hole ID
- HLD25-32
- Project
- Haldane
- Commodity
- lead
- Ticker
- SNAG
Geometry
- Grade
- 0.75
- Grade Unit
- %
- Intercept
- 22.65 m
- From
- 153 m
- To
- 175.65 m
Classification
- Sample Type
- drill
- Group ID
- HLD25-32:153.00-175.65
QA/QC
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-19T00:00:00.000Z
Reasoning: The lead grade is weak but contributes to the polymetallic nature of the intercept.
Positive factors
- Presence of lead as a byproduct
Negative factors
- True width unknown
- Cut-off grade undisclosed
Evidence · table
“0.75”
Context: 22.65
HLD25-32Haldane · zincGrade: 0.8Grade Unit: %Intercept: 22.65 mView all detailsHide details
Identity
- Hole ID
- HLD25-32
- Project
- Haldane
- Commodity
- zinc
- Ticker
- SNAG
Geometry
- Grade
- 0.8
- Grade Unit
- %
- Intercept
- 22.65 m
- From
- 153 m
- To
- 175.65 m
Classification
- Sample Type
- drill
- Group ID
- HLD25-32:153.00-175.65
QA/QC
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-19T00:00:00.000Z
Reasoning: The zinc grade is weak but contributes to the polymetallic nature of the intercept.
Positive factors
- Presence of zinc as a byproduct
Negative factors
- True width unknown
- Cut-off grade undisclosed
Evidence · table
“0.80”
Context: 22.65
HLD25-32Haldane · silverGrade: 326Grade Unit: g/tIntercept: 6.5 mView all detailsHide details
Identity
- Hole ID
- HLD25-32
- Project
- Haldane
- Commodity
- silver
- Ticker
- SNAG
Geometry
- Grade
- 326
- Grade Unit
- g/t
- Intercept
- 6.5 m
- From
- 165.1 m
- To
- 171.6 m
Classification
- Sample Type
- drill
- Group ID
- HLD25-32:165.10-171.60
QA/QC
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
Metal Equivalent
- Metal Eq. Grade
- 346
- Metal Eq. Unit
- g/t Silver Eq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-19T00:00:00.000Z
Reasoning: This sub-interval shows a moderate silver grade over a good width, enhancing the overall intercept's value.
Positive factors
- Moderate silver grade over a good width
- High-grade sub-interval within a broader intercept
Negative factors
- True width unknown
- Metal equivalent assumptions not property-specific
- Cut-off grade undisclosed
Evidence · table
“326”
Context: 6.50
HLD25-32Haldane · goldGrade: 0.19Grade Unit: g/tIntercept: 6.5 mView all detailsHide details
Identity
- Hole ID
- HLD25-32
- Project
- Haldane
- Commodity
- gold
- Ticker
- SNAG
Geometry
- Grade
- 0.19
- Grade Unit
- g/t
- Intercept
- 6.5 m
- From
- 165.1 m
- To
- 171.6 m
Classification
- Sample Type
- drill
- Group ID
- HLD25-32:165.10-171.60
QA/QC
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-19T00:00:00.000Z
Reasoning: The gold grade is weak but contributes to the polymetallic nature of the sub-interval.
Positive factors
- Presence of gold as a byproduct
Negative factors
- True width unknown
- Cut-off grade undisclosed
Evidence · table
“0.19”
Context: 6.50
HLD25-32Haldane · leadGrade: 0.81Grade Unit: %Intercept: 6.5 mView all detailsHide details
Identity
- Hole ID
- HLD25-32
- Project
- Haldane
- Commodity
- lead
- Ticker
- SNAG
Geometry
- Grade
- 0.81
- Grade Unit
- %
- Intercept
- 6.5 m
- From
- 165.1 m
- To
- 171.6 m
Classification
- Sample Type
- drill
- Group ID
- HLD25-32:165.10-171.60
QA/QC
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-19T00:00:00.000Z
Reasoning: The lead grade is weak but contributes to the polymetallic nature of the sub-interval.
Positive factors
- Presence of lead as a byproduct
Negative factors
- True width unknown
- Cut-off grade undisclosed
Evidence · table
“0.81”
Context: 6.50
HLD25-32Haldane · zincGrade: 1.3Grade Unit: %Intercept: 6.5 mView all detailsHide details
Identity
- Hole ID
- HLD25-32
- Project
- Haldane
- Commodity
- zinc
- Ticker
- SNAG
Geometry
- Grade
- 1.3
- Grade Unit
- %
- Intercept
- 6.5 m
- From
- 165.1 m
- To
- 171.6 m
Classification
- Sample Type
- drill
- Group ID
- HLD25-32:165.10-171.60
QA/QC
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-19T00:00:00.000Z
Reasoning: The zinc grade is weak but contributes to the polymetallic nature of the sub-interval.
Positive factors
- Presence of zinc as a byproduct
Negative factors
- True width unknown
- Cut-off grade undisclosed
Evidence · table
“1.30”
Context: 6.50
HLD25-32Haldane · silverGrade: 1438Grade Unit: g/tIntercept: 0.8 mView all detailsHide details
Identity
- Hole ID
- HLD25-32
- Project
- Haldane
- Commodity
- silver
- Ticker
- SNAG
Geometry
- Grade
- 1438
- Grade Unit
- g/t
- Intercept
- 0.8 m
- From
- 169 m
- To
- 169.8 m
Classification
- Sample Type
- drill
- Group ID
- HLD25-32:169.00-169.80
QA/QC
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
Metal Equivalent
- Metal Eq. Grade
- 1428
- Metal Eq. Unit
- g/t Silver Eq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-19T00:00:00.000Z
Reasoning: This sub-interval shows bonanza-grade silver, though over a very narrow width, contributing to the overall intercept's value.
Positive factors
- Exceptional silver grade (1438 g/t)
- High-grade sub-interval
Negative factors
- True width unknown
- Narrow intercept length (0.8 m)
- Metal equivalent assumptions not property-specific
- Cut-off grade undisclosed
Evidence · table
“1438”
Context: 0.80
HLD25-32Haldane · goldGrade: 0.51Grade Unit: g/tIntercept: 0.8 mView all detailsHide details
Identity
- Hole ID
- HLD25-32
- Project
- Haldane
- Commodity
- gold
- Ticker
- SNAG
Geometry
- Grade
- 0.51
- Grade Unit
- g/t
- Intercept
- 0.8 m
- From
- 169 m
- To
- 169.8 m
Classification
- Sample Type
- drill
- Group ID
- HLD25-32:169.00-169.80
QA/QC
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-19T00:00:00.000Z
Reasoning: The gold grade is weak but contributes to the polymetallic nature of the sub-interval.
Positive factors
- Presence of gold as a byproduct
Negative factors
- True width unknown
- Cut-off grade undisclosed
Evidence · table
“0.51”
Context: 0.80
HLD25-32Haldane · leadGrade: 2.78Grade Unit: %Intercept: 0.8 mView all detailsHide details
Identity
- Hole ID
- HLD25-32
- Project
- Haldane
- Commodity
- lead
- Ticker
- SNAG
Geometry
- Grade
- 2.78
- Grade Unit
- %
- Intercept
- 0.8 m
- From
- 169 m
- To
- 169.8 m
Classification
- Sample Type
- drill
- Group ID
- HLD25-32:169.00-169.80
QA/QC
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-19T00:00:00.000Z
Reasoning: The lead grade is moderate within this high-grade sub-interval, contributing to the overall polymetallic value.
Positive factors
- Moderate lead grade within a high-grade sub-interval
Negative factors
- True width unknown
- Cut-off grade undisclosed
Evidence · table
“2.78”
Context: 0.80
HLD25-32Haldane · zincGrade: 1.6Grade Unit: %Intercept: 0.8 mView all detailsHide details
Identity
- Hole ID
- HLD25-32
- Project
- Haldane
- Commodity
- zinc
- Ticker
- SNAG
Geometry
- Grade
- 1.6
- Grade Unit
- %
- Intercept
- 0.8 m
- From
- 169 m
- To
- 169.8 m
Classification
- Sample Type
- drill
- Group ID
- HLD25-32:169.00-169.80
QA/QC
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-19T00:00:00.000Z
Reasoning: The zinc grade is weak but contributes to the polymetallic nature of the sub-interval.
Positive factors
- Presence of zinc as a byproduct
Negative factors
- True width unknown
- Cut-off grade undisclosed
Evidence · table
“1.60”
Context: 0.80
HLD25-33Haldane · silverGrade: 176Grade Unit: g/tIntercept: 5.56 mView all detailsHide details
Identity
- Hole ID
- HLD25-33
- Project
- Haldane
- Commodity
- silver
- Ticker
- SNAG
Geometry
- Grade
- 176
- Grade Unit
- g/t
- Intercept
- 5.56 m
- From
- 193.49 m
- To
- 199.05 m
Classification
- Sample Type
- drill
- Group ID
- HLD25-33:193.49-199.05
QA/QC
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
Metal Equivalent
- Metal Eq. Grade
- 224
- Metal Eq. Unit
- g/t Silver Eq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-19T00:00:00.000Z
Reasoning: This intercept shows a moderate silver grade over a good width, contributing to the overall mineralization footprint.
Positive factors
- Moderate silver grade over a good width
Negative factors
- True width unknown
- Metal equivalent assumptions not property-specific
- Cut-off grade undisclosed
Evidence · table
“176”
Context: 5.56
HLD25-33Haldane · goldGrade: 0.11Grade Unit: g/tIntercept: 5.56 mView all detailsHide details
Identity
- Hole ID
- HLD25-33
- Project
- Haldane
- Commodity
- gold
- Ticker
- SNAG
Geometry
- Grade
- 0.11
- Grade Unit
- g/t
- Intercept
- 5.56 m
- From
- 193.49 m
- To
- 199.05 m
Classification
- Sample Type
- drill
- Group ID
- HLD25-33:193.49-199.05
QA/QC
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-19T00:00:00.000Z
Reasoning: The gold grade is weak but contributes to the polymetallic nature of the intercept.
Positive factors
- Presence of gold as a byproduct
Negative factors
- True width unknown
- Cut-off grade undisclosed
Evidence · table
“0.11”
Context: 5.56
HLD25-33Haldane · leadGrade: 1.33Grade Unit: %Intercept: 5.56 mView all detailsHide details
Identity
- Hole ID
- HLD25-33
- Project
- Haldane
- Commodity
- lead
- Ticker
- SNAG
Geometry
- Grade
- 1.33
- Grade Unit
- %
- Intercept
- 5.56 m
- From
- 193.49 m
- To
- 199.05 m
Classification
- Sample Type
- drill
- Group ID
- HLD25-33:193.49-199.05
QA/QC
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-19T00:00:00.000Z
Reasoning: The lead grade is weak but contributes to the polymetallic nature of the intercept.
Positive factors
- Presence of lead as a byproduct
Negative factors
- True width unknown
- Cut-off grade undisclosed
Evidence · table
“1.33”
Context: 5.56
HLD25-33Haldane · zincGrade: 1.96Grade Unit: %Intercept: 5.56 mView all detailsHide details
Identity
- Hole ID
- HLD25-33
- Project
- Haldane
- Commodity
- zinc
- Ticker
- SNAG
Geometry
- Grade
- 1.96
- Grade Unit
- %
- Intercept
- 5.56 m
- From
- 193.49 m
- To
- 199.05 m
Classification
- Sample Type
- drill
- Group ID
- HLD25-33:193.49-199.05
QA/QC
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-19T00:00:00.000Z
Reasoning: The zinc grade is weak but contributes to the polymetallic nature of the intercept.
Positive factors
- Presence of zinc as a byproduct
Negative factors
- True width unknown
- Cut-off grade undisclosed
Evidence · table
“1.96”
Context: 5.56
HLD25-33Haldane · silverGrade: 311Grade Unit: g/tIntercept: 2.45 mView all detailsHide details
Identity
- Hole ID
- HLD25-33
- Project
- Haldane
- Commodity
- silver
- Ticker
- SNAG
Geometry
- Grade
- 311
- Grade Unit
- g/t
- Intercept
- 2.45 m
- From
- 195.35 m
- To
- 197.8 m
Classification
- Sample Type
- drill
- Group ID
- HLD25-33:195.35-197.80
QA/QC
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
Metal Equivalent
- Metal Eq. Grade
- 376
- Metal Eq. Unit
- g/t Silver Eq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-19T00:00:00.000Z
Reasoning: This sub-interval shows a moderate silver grade over a good width, enhancing the overall intercept's value.
Positive factors
- Moderate silver grade over a good width
- High-grade sub-interval within a broader intercept
Negative factors
- True width unknown
- Metal equivalent assumptions not property-specific
- Cut-off grade undisclosed
Evidence · table
“311”
Context: 2.45
HLD25-33Haldane · goldGrade: 0.17Grade Unit: g/tIntercept: 2.45 mView all detailsHide details
Identity
- Hole ID
- HLD25-33
- Project
- Haldane
- Commodity
- gold
- Ticker
- SNAG
Geometry
- Grade
- 0.17
- Grade Unit
- g/t
- Intercept
- 2.45 m
- From
- 195.35 m
- To
- 197.8 m
Classification
- Sample Type
- drill
- Group ID
- HLD25-33:195.35-197.80
QA/QC
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-19T00:00:00.000Z
Reasoning: The gold grade is weak but contributes to the polymetallic nature of the sub-interval.
Positive factors
- Presence of gold as a byproduct
Negative factors
- True width unknown
- Cut-off grade undisclosed
Evidence · table
“0.17”
Context: 2.45
HLD25-33Haldane · leadGrade: 1.51Grade Unit: %Intercept: 2.45 mView all detailsHide details
Identity
- Hole ID
- HLD25-33
- Project
- Haldane
- Commodity
- lead
- Ticker
- SNAG
Geometry
- Grade
- 1.51
- Grade Unit
- %
- Intercept
- 2.45 m
- From
- 195.35 m
- To
- 197.8 m
Classification
- Sample Type
- drill
- Group ID
- HLD25-33:195.35-197.80
QA/QC
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-19T00:00:00.000Z
Reasoning: The lead grade is weak but contributes to the polymetallic nature of the sub-interval.
Positive factors
- Presence of lead as a byproduct
Negative factors
- True width unknown
- Cut-off grade undisclosed
Evidence · table
“1.51”
Context: 2.45
HLD25-33Haldane · zincGrade: 3.27Grade Unit: %Intercept: 2.45 mView all detailsHide details
Identity
- Hole ID
- HLD25-33
- Project
- Haldane
- Commodity
- zinc
- Ticker
- SNAG
Geometry
- Grade
- 3.27
- Grade Unit
- %
- Intercept
- 2.45 m
- From
- 195.35 m
- To
- 197.8 m
Classification
- Sample Type
- drill
- Group ID
- HLD25-33:195.35-197.80
QA/QC
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-19T00:00:00.000Z
Reasoning: The zinc grade is moderate within this sub-interval, contributing to the overall polymetallic value.
Positive factors
- Moderate zinc grade within a sub-interval
Negative factors
- True width unknown
- Cut-off grade undisclosed
Evidence · table
“3.27”
Context: 2.45
HLD25-34Haldane · silverGrade: 146Grade Unit: g/tIntercept: 13.6 mView all detailsHide details
Identity
- Hole ID
- HLD25-34
- Project
- Haldane
- Commodity
- silver
- Ticker
- SNAG
Geometry
- Grade
- 146
- Grade Unit
- g/t
- Intercept
- 13.6 m
- From
- 157.5 m
- To
- 171.1 m
Classification
- Sample Type
- drill
- Group ID
- HLD25-34:157.50-171.10
QA/QC
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
Metal Equivalent
- Metal Eq. Grade
- 204
- Metal Eq. Unit
- g/t Silver Eq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-19T00:00:00.000Z
Reasoning: This intercept shows a moderate silver grade over a significant width, contributing to the overall mineralization footprint.
Positive factors
- Moderate silver grade
- Significant intercept length (13.6 m)
Negative factors
- True width unknown
- Metal equivalent assumptions not property-specific
- Cut-off grade undisclosed
Evidence · table
“146”
Context: 13.60
HLD25-34Haldane · goldGrade: 0.15Grade Unit: g/tIntercept: 13.6 mView all detailsHide details
Identity
- Hole ID
- HLD25-34
- Project
- Haldane
- Commodity
- gold
- Ticker
- SNAG
Geometry
- Grade
- 0.15
- Grade Unit
- g/t
- Intercept
- 13.6 m
- From
- 157.5 m
- To
- 171.1 m
Classification
- Sample Type
- drill
- Group ID
- HLD25-34:157.50-171.10
QA/QC
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-19T00:00:00.000Z
Reasoning: The gold grade is weak but contributes to the polymetallic nature of the intercept.
Positive factors
- Presence of gold as a byproduct
Negative factors
- True width unknown
- Cut-off grade undisclosed
Evidence · table
“0.15”
Context: 13.60
HLD25-34Haldane · leadGrade: 2.34Grade Unit: %Intercept: 13.6 mView all detailsHide details
Identity
- Hole ID
- HLD25-34
- Project
- Haldane
- Commodity
- lead
- Ticker
- SNAG
Geometry
- Grade
- 2.34
- Grade Unit
- %
- Intercept
- 13.6 m
- From
- 157.5 m
- To
- 171.1 m
Classification
- Sample Type
- drill
- Group ID
- HLD25-34:157.50-171.10
QA/QC
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-19T00:00:00.000Z
Reasoning: The lead grade is weak but contributes to the polymetallic nature of the intercept.
Positive factors
- Presence of lead as a byproduct
Negative factors
- True width unknown
- Cut-off grade undisclosed
Evidence · table
“2.34”
Context: 13.60
HLD25-34Haldane · zincGrade: 1.24Grade Unit: %Intercept: 13.6 mView all detailsHide details
Identity
- Hole ID
- HLD25-34
- Project
- Haldane
- Commodity
- zinc
- Ticker
- SNAG
Geometry
- Grade
- 1.24
- Grade Unit
- %
- Intercept
- 13.6 m
- From
- 157.5 m
- To
- 171.1 m
Classification
- Sample Type
- drill
- Group ID
- HLD25-34:157.50-171.10
QA/QC
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-19T00:00:00.000Z
Reasoning: The zinc grade is weak but contributes to the polymetallic nature of the intercept.
Positive factors
- Presence of zinc as a byproduct
Negative factors
- True width unknown
- Cut-off grade undisclosed
Evidence · table
“1.24”
Context: 13.60
HLD25-34Haldane · silverGrade: 196Grade Unit: g/tIntercept: 9.2 mView all detailsHide details
Identity
- Hole ID
- HLD25-34
- Project
- Haldane
- Commodity
- silver
- Ticker
- SNAG
Geometry
- Grade
- 196
- Grade Unit
- g/t
- Intercept
- 9.2 m
- From
- 159 m
- To
- 168.2 m
Classification
- Sample Type
- drill
- Group ID
- HLD25-34:159.00-168.20
QA/QC
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
Metal Equivalent
- Metal Eq. Grade
- 260
- Metal Eq. Unit
- g/t Silver Eq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-19T00:00:00.000Z
Reasoning: This sub-interval shows a moderate silver grade over a good width, enhancing the overall intercept's value.
Positive factors
- Moderate silver grade over a good width
- High-grade sub-interval within a broader intercept
Negative factors
- True width unknown
- Metal equivalent assumptions not property-specific
- Cut-off grade undisclosed
Evidence · table
“196”
Context: 9.20
HLD25-34Haldane · goldGrade: 0.19Grade Unit: g/tIntercept: 9.2 mView all detailsHide details
Identity
- Hole ID
- HLD25-34
- Project
- Haldane
- Commodity
- gold
- Ticker
- SNAG
Geometry
- Grade
- 0.19
- Grade Unit
- g/t
- Intercept
- 9.2 m
- From
- 159 m
- To
- 168.2 m
Classification
- Sample Type
- drill
- Group ID
- HLD25-34:159.00-168.20
QA/QC
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-19T00:00:00.000Z
Reasoning: The gold grade is weak but contributes to the polymetallic nature of the sub-interval.
Positive factors
- Presence of gold as a byproduct
Negative factors
- True width unknown
- Cut-off grade undisclosed
Evidence · table
“0.19”
Context: 9.20
HLD25-34Haldane · leadGrade: 3.22Grade Unit: %Intercept: 9.2 mView all detailsHide details
Identity
- Hole ID
- HLD25-34
- Project
- Haldane
- Commodity
- lead
- Ticker
- SNAG
Geometry
- Grade
- 3.22
- Grade Unit
- %
- Intercept
- 9.2 m
- From
- 159 m
- To
- 168.2 m
Classification
- Sample Type
- drill
- Group ID
- HLD25-34:159.00-168.20
QA/QC
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-19T00:00:00.000Z
Reasoning: The lead grade is moderate within this sub-interval, contributing to the overall polymetallic value.
Positive factors
- Moderate lead grade within a sub-interval
Negative factors
- True width unknown
- Cut-off grade undisclosed
Evidence · table
“3.22”
Context: 9.20
HLD25-34Haldane · zincGrade: 0.76Grade Unit: %Intercept: 9.2 mView all detailsHide details
Identity
- Hole ID
- HLD25-34
- Project
- Haldane
- Commodity
- zinc
- Ticker
- SNAG
Geometry
- Grade
- 0.76
- Grade Unit
- %
- Intercept
- 9.2 m
- From
- 159 m
- To
- 168.2 m
Classification
- Sample Type
- drill
- Group ID
- HLD25-34:159.00-168.20
QA/QC
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-19T00:00:00.000Z
Reasoning: The zinc grade is weak but contributes to the polymetallic nature of the sub-interval.
Positive factors
- Presence of zinc as a byproduct
Negative factors
- True width unknown
- Cut-off grade undisclosed
Evidence · table
“0.76”
Context: 9.20
HLD25-34Haldane · silverGrade: 467Grade Unit: g/tIntercept: 1.2 mView all detailsHide details
Identity
- Hole ID
- HLD25-34
- Project
- Haldane
- Commodity
- silver
- Ticker
- SNAG
Geometry
- Grade
- 467
- Grade Unit
- g/t
- Intercept
- 1.2 m
- From
- 165.8 m
- To
- 167 m
Classification
- Sample Type
- drill
- Group ID
- HLD25-34:165.80-167.00
QA/QC
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
Metal Equivalent
- Metal Eq. Grade
- 672
- Metal Eq. Unit
- g/t Silver Eq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-19T00:00:00.000Z
Reasoning: This sub-interval shows a strong silver grade over a narrow width, enhancing the overall intercept's value.
Positive factors
- Strong silver grade over a narrow width
- High-grade sub-interval
Negative factors
- True width unknown
- Narrow intercept length (1.2 m)
- Metal equivalent assumptions not property-specific
- Cut-off grade undisclosed
Evidence · table
“467”
Context: 1.20
HLD25-34Haldane · goldGrade: 0.21Grade Unit: g/tIntercept: 1.2 mView all detailsHide details
Identity
- Hole ID
- HLD25-34
- Project
- Haldane
- Commodity
- gold
- Ticker
- SNAG
Geometry
- Grade
- 0.21
- Grade Unit
- g/t
- Intercept
- 1.2 m
- From
- 165.8 m
- To
- 167 m
Classification
- Sample Type
- drill
- Group ID
- HLD25-34:165.80-167.00
QA/QC
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-19T00:00:00.000Z
Reasoning: The gold grade is weak but contributes to the polymetallic nature of the sub-interval.
Positive factors
- Presence of gold as a byproduct
Negative factors
- True width unknown
- Cut-off grade undisclosed
Evidence · table
“0.21”
Context: 1.20
HLD25-34Haldane · leadGrade: 12.07Grade Unit: %Intercept: 1.2 mView all detailsHide details
Identity
- Hole ID
- HLD25-34
- Project
- Haldane
- Commodity
- lead
- Ticker
- SNAG
Geometry
- Grade
- 12.07
- Grade Unit
- %
- Intercept
- 1.2 m
- From
- 165.8 m
- To
- 167 m
Classification
- Sample Type
- drill
- Group ID
- HLD25-34:165.80-167.00
QA/QC
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-19T00:00:00.000Z
Reasoning: The lead grade is exceptional within this sub-interval, significantly contributing to the overall polymetallic value.
Positive factors
- Exceptional lead grade within a sub-interval
Negative factors
- True width unknown
- Cut-off grade undisclosed
Evidence · table
“12.07”
Context: 1.20
HLD25-34Haldane · zincGrade: 1.34Grade Unit: %Intercept: 1.2 mView all detailsHide details
Identity
- Hole ID
- HLD25-34
- Project
- Haldane
- Commodity
- zinc
- Ticker
- SNAG
Geometry
- Grade
- 1.34
- Grade Unit
- %
- Intercept
- 1.2 m
- From
- 165.8 m
- To
- 167 m
Classification
- Sample Type
- drill
- Group ID
- HLD25-34:165.80-167.00
QA/QC
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-19T00:00:00.000Z
Reasoning: The zinc grade is weak but contributes to the polymetallic nature of the sub-interval.
Positive factors
- Presence of zinc as a byproduct
Negative factors
- True width unknown
- Cut-off grade undisclosed
Evidence · table
“1.34”
Context: 1.20
HLD25-35Haldane · silverGrade: 153Grade Unit: g/tIntercept: 27.9 mView all detailsHide details
Identity
- Hole ID
- HLD25-35
- Project
- Haldane
- Commodity
- silver
- Ticker
- SNAG
Geometry
- Grade
- 153
- Grade Unit
- g/t
- Intercept
- 27.9 m
- From
- 170.6 m
- To
- 198.5 m
Classification
- Sample Type
- drill
- Group ID
- HLD25-35:170.60-198.50
QA/QC
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
Metal Equivalent
- Metal Eq. Grade
- 172
- Metal Eq. Unit
- g/t Silver Eq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-19T00:00:00.000Z
Reasoning: This intercept shows a moderate silver grade over a significant width, contributing to the overall mineralization footprint.
Positive factors
- Moderate silver grade
- Significant intercept length (27.9 m)
Negative factors
- True width unknown
- Metal equivalent assumptions not property-specific
- Cut-off grade undisclosed
Evidence · table
“153”
Context: 27.90
HLD25-35Haldane · goldGrade: 0.18Grade Unit: g/tIntercept: 27.9 mView all detailsHide details
Identity
- Hole ID
- HLD25-35
- Project
- Haldane
- Commodity
- gold
- Ticker
- SNAG
Geometry
- Grade
- 0.18
- Grade Unit
- g/t
- Intercept
- 27.9 m
- From
- 170.6 m
- To
- 198.5 m
Classification
- Sample Type
- drill
- Group ID
- HLD25-35:170.60-198.50
QA/QC
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-19T00:00:00.000Z
Reasoning: The gold grade is weak but contributes to the polymetallic nature of the intercept.
Positive factors
- Presence of gold as a byproduct
Negative factors
- True width unknown
- Cut-off grade undisclosed
Evidence · table
“0.18”
Context: 27.90
HLD25-35Haldane · leadGrade: 0.47Grade Unit: %Intercept: 27.9 mView all detailsHide details
Identity
- Hole ID
- HLD25-35
- Project
- Haldane
- Commodity
- lead
- Ticker
- SNAG
Geometry
- Grade
- 0.47
- Grade Unit
- %
- Intercept
- 27.9 m
- From
- 170.6 m
- To
- 198.5 m
Classification
- Sample Type
- drill
- Group ID
- HLD25-35:170.60-198.50
QA/QC
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-19T00:00:00.000Z
Reasoning: The lead grade is weak but contributes to the polymetallic nature of the intercept.
Positive factors
- Presence of lead as a byproduct
Negative factors
- True width unknown
- Cut-off grade undisclosed
Evidence · table
“0.47”
Context: 27.90
HLD25-35Haldane · zincGrade: 0.75Grade Unit: %Intercept: 27.9 mView all detailsHide details
Identity
- Hole ID
- HLD25-35
- Project
- Haldane
- Commodity
- zinc
- Ticker
- SNAG
Geometry
- Grade
- 0.75
- Grade Unit
- %
- Intercept
- 27.9 m
- From
- 170.6 m
- To
- 198.5 m
Classification
- Sample Type
- drill
- Group ID
- HLD25-35:170.60-198.50
QA/QC
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-19T00:00:00.000Z
Reasoning: The zinc grade is weak but contributes to the polymetallic nature of the intercept.
Positive factors
- Presence of zinc as a byproduct
Negative factors
- True width unknown
- Cut-off grade undisclosed
Evidence · table
“0.75”
Context: 27.90
HLD25-35Haldane · silverGrade: 231Grade Unit: g/tIntercept: 14.4 mView all detailsHide details
Identity
- Hole ID
- HLD25-35
- Project
- Haldane
- Commodity
- silver
- Ticker
- SNAG
Geometry
- Grade
- 231
- Grade Unit
- g/t
- Intercept
- 14.4 m
- From
- 170.6 m
- To
- 185 m
Classification
- Sample Type
- drill
- Group ID
- HLD25-35:170.60-185.00
QA/QC
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
Metal Equivalent
- Metal Eq. Grade
- 243
- Metal Eq. Unit
- g/t Silver Eq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-19T00:00:00.000Z
Reasoning: This sub-interval shows a moderate silver grade over a significant width, enhancing the overall intercept's value.
Positive factors
- Moderate silver grade over a significant width
- High-grade sub-interval within a broader intercept
Negative factors
- True width unknown
- Metal equivalent assumptions not property-specific
- Cut-off grade undisclosed
Evidence · table
“231”
Context: 14.40
HLD25-35Haldane · goldGrade: 0.24Grade Unit: g/tIntercept: 14.4 mView all detailsHide details
Identity
- Hole ID
- HLD25-35
- Project
- Haldane
- Commodity
- gold
- Ticker
- SNAG
Geometry
- Grade
- 0.24
- Grade Unit
- g/t
- Intercept
- 14.4 m
- From
- 170.6 m
- To
- 185 m
Classification
- Sample Type
- drill
- Group ID
- HLD25-35:170.60-185.00
QA/QC
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-19T00:00:00.000Z
Reasoning: The gold grade is weak but contributes to the polymetallic nature of the sub-interval.
Positive factors
- Presence of gold as a byproduct
Negative factors
- True width unknown
- Cut-off grade undisclosed
Evidence · table
“0.24”
Context: 14.40
HLD25-35Haldane · leadGrade: 0.54Grade Unit: %Intercept: 14.4 mView all detailsHide details
Identity
- Hole ID
- HLD25-35
- Project
- Haldane
- Commodity
- lead
- Ticker
- SNAG
Geometry
- Grade
- 0.54
- Grade Unit
- %
- Intercept
- 14.4 m
- From
- 170.6 m
- To
- 185 m
Classification
- Sample Type
- drill
- Group ID
- HLD25-35:170.60-185.00
QA/QC
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-19T00:00:00.000Z
Reasoning: The lead grade is weak but contributes to the polymetallic nature of the sub-interval.
Positive factors
- Presence of lead as a byproduct
Negative factors
- True width unknown
- Cut-off grade undisclosed
Evidence · table
“0.54”
Context: 14.40
HLD25-35Haldane · zincGrade: 0.39Grade Unit: %Intercept: 14.4 mView all detailsHide details
Identity
- Hole ID
- HLD25-35
- Project
- Haldane
- Commodity
- zinc
- Ticker
- SNAG
Geometry
- Grade
- 0.39
- Grade Unit
- %
- Intercept
- 14.4 m
- From
- 170.6 m
- To
- 185 m
Classification
- Sample Type
- drill
- Group ID
- HLD25-35:170.60-185.00
QA/QC
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-19T00:00:00.000Z
Reasoning: The zinc grade is weak but contributes to the polymetallic nature of the sub-interval.
Positive factors
- Presence of zinc as a byproduct
Negative factors
- True width unknown
- Cut-off grade undisclosed
Evidence · table
“0.39”
Context: 14.40
HLD25-35Haldane · silverGrade: 425Grade Unit: g/tIntercept: 0.85 mView all detailsHide details
Identity
- Hole ID
- HLD25-35
- Project
- Haldane
- Commodity
- silver
- Ticker
- SNAG
Geometry
- Grade
- 425
- Grade Unit
- g/t
- Intercept
- 0.85 m
- From
- 174.15 m
- To
- 175 m
Classification
- Sample Type
- drill
- Group ID
- HLD25-35:174.15-175.00
QA/QC
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
Metal Equivalent
- Metal Eq. Grade
- 447
- Metal Eq. Unit
- g/t Silver Eq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-19T00:00:00.000Z
Reasoning: This sub-interval shows a moderate silver grade over a narrow width, enhancing the overall intercept's value.
Positive factors
- Moderate silver grade over a narrow width
- High-grade sub-interval
Negative factors
- True width unknown
- Narrow intercept length (0.85 m)
- Metal equivalent assumptions not property-specific
- Cut-off grade undisclosed
Evidence · table
“425”
Context: 0.85
HLD25-35Haldane · goldGrade: 0.15Grade Unit: g/tIntercept: 0.85 mView all detailsHide details
Identity
- Hole ID
- HLD25-35
- Project
- Haldane
- Commodity
- gold
- Ticker
- SNAG
Geometry
- Grade
- 0.15
- Grade Unit
- g/t
- Intercept
- 0.85 m
- From
- 174.15 m
- To
- 175 m
Classification
- Sample Type
- drill
- Group ID
- HLD25-35:174.15-175.00
QA/QC
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-19T00:00:00.000Z
Reasoning: The gold grade is weak but contributes to the polymetallic nature of the sub-interval.
Positive factors
- Presence of gold as a byproduct
Negative factors
- True width unknown
- Cut-off grade undisclosed
Evidence · table
“0.15”
Context: 0.85
HLD25-35Haldane · leadGrade: 2.24Grade Unit: %Intercept: 0.85 mView all detailsHide details
Identity
- Hole ID
- HLD25-35
- Project
- Haldane
- Commodity
- lead
- Ticker
- SNAG
Geometry
- Grade
- 2.24
- Grade Unit
- %
- Intercept
- 0.85 m
- From
- 174.15 m
- To
- 175 m
Classification
- Sample Type
- drill
- Group ID
- HLD25-35:174.15-175.00
QA/QC
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-19T00:00:00.000Z
Reasoning: The lead grade is weak but contributes to the polymetallic nature of the sub-interval.
Positive factors
- Presence of lead as a byproduct
Negative factors
- True width unknown
- Cut-off grade undisclosed
Evidence · table
“2.24”
Context: 0.85
HLD25-35Haldane · zincGrade: 0.55Grade Unit: %Intercept: 0.85 mView all detailsHide details
Identity
- Hole ID
- HLD25-35
- Project
- Haldane
- Commodity
- zinc
- Ticker
- SNAG
Geometry
- Grade
- 0.55
- Grade Unit
- %
- Intercept
- 0.85 m
- From
- 174.15 m
- To
- 175 m
Classification
- Sample Type
- drill
- Group ID
- HLD25-35:174.15-175.00
QA/QC
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-19T00:00:00.000Z
Reasoning: The zinc grade is weak but contributes to the polymetallic nature of the sub-interval.
Positive factors
- Presence of zinc as a byproduct
Negative factors
- True width unknown
- Cut-off grade undisclosed
Evidence · table
“0.55”
Context: 0.85
HLD25-35Haldane · silverGrade: 1261Grade Unit: g/tIntercept: 1.25 mView all detailsHide details
Identity
- Hole ID
- HLD25-35
- Project
- Haldane
- Commodity
- silver
- Ticker
- SNAG
Geometry
- Grade
- 1261
- Grade Unit
- g/t
- Intercept
- 1.25 m
- From
- 179.5 m
- To
- 180.75 m
Classification
- Sample Type
- drill
- Group ID
- HLD25-35:179.50-180.75
QA/QC
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
Metal Equivalent
- Metal Eq. Grade
- 1217
- Metal Eq. Unit
- g/t Silver Eq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-19T00:00:00.000Z
Reasoning: This sub-interval shows bonanza-grade silver over a narrow width, significantly enhancing the overall intercept's value.
Positive factors
- Exceptional silver grade (1261 g/t)
- High-grade sub-interval
Negative factors
- True width unknown
- Narrow intercept length (1.25 m)
- Metal equivalent assumptions not property-specific
- Cut-off grade undisclosed
Evidence · table
“1261”
Context: 1.25
HLD25-35Haldane · goldGrade: 0.74Grade Unit: g/tIntercept: 1.25 mView all detailsHide details
Identity
- Hole ID
- HLD25-35
- Project
- Haldane
- Commodity
- gold
- Ticker
- SNAG
Geometry
- Grade
- 0.74
- Grade Unit
- g/t
- Intercept
- 1.25 m
- From
- 179.5 m
- To
- 180.75 m
Classification
- Sample Type
- drill
- Group ID
- HLD25-35:179.50-180.75
QA/QC
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-19T00:00:00.000Z
Reasoning: The gold grade is weak but contributes to the polymetallic nature of the sub-interval.
Positive factors
- Presence of gold as a byproduct
Negative factors
- True width unknown
- Cut-off grade undisclosed
Evidence · table
“0.74”
Context: 1.25
HLD25-35Haldane · leadGrade: 0.35Grade Unit: %Intercept: 1.25 mView all detailsHide details
Identity
- Hole ID
- HLD25-35
- Project
- Haldane
- Commodity
- lead
- Ticker
- SNAG
Geometry
- Grade
- 0.35
- Grade Unit
- %
- Intercept
- 1.25 m
- From
- 179.5 m
- To
- 180.75 m
Classification
- Sample Type
- drill
- Group ID
- HLD25-35:179.50-180.75
QA/QC
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-19T00:00:00.000Z
Reasoning: The lead grade is weak but contributes to the polymetallic nature of the sub-interval.
Positive factors
- Presence of lead as a byproduct
Negative factors
- True width unknown
- Cut-off grade undisclosed
Evidence · table
“0.35”
Context: 1.25
HLD25-35Haldane · zincGrade: 0.41Grade Unit: %Intercept: 1.25 mView all detailsHide details
Identity
- Hole ID
- HLD25-35
- Project
- Haldane
- Commodity
- zinc
- Ticker
- SNAG
Geometry
- Grade
- 0.41
- Grade Unit
- %
- Intercept
- 1.25 m
- From
- 179.5 m
- To
- 180.75 m
Classification
- Sample Type
- drill
- Group ID
- HLD25-35:179.50-180.75
QA/QC
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-19T00:00:00.000Z
Reasoning: The zinc grade is weak but contributes to the polymetallic nature of the sub-interval.
Positive factors
- Presence of zinc as a byproduct
Negative factors
- True width unknown
- Cut-off grade undisclosed
Evidence · table
“0.41”
Context: 1.25
HLD25-35Haldane · silverGrade: 55Grade Unit: g/tIntercept: 6.35 mView all detailsHide details
Identity
- Hole ID
- HLD25-35
- Project
- Haldane
- Commodity
- silver
- Ticker
- SNAG
Geometry
- Grade
- 55
- Grade Unit
- g/t
- Intercept
- 6.35 m
- From
- 189.8 m
- To
- 196.15 m
Classification
- Sample Type
- drill
- Group ID
- HLD25-35:189.80-196.15
QA/QC
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
Metal Equivalent
- Metal Eq. Grade
- 73
- Metal Eq. Unit
- g/t Silver Eq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-19T00:00:00.000Z
Reasoning: This sub-interval shows weak silver mineralization over a good width, but the grade is low.
Positive factors
- Presence of silver mineralization over a good width
Negative factors
- True width unknown
- Low silver grade
- Metal equivalent assumptions not property-specific
- Cut-off grade undisclosed
Evidence · table
“55”
Context: 6.35
HLD25-35Haldane · goldGrade: 0.08Grade Unit: g/tIntercept: 6.35 mView all detailsHide details
Identity
- Hole ID
- HLD25-35
- Project
- Haldane
- Commodity
- gold
- Ticker
- SNAG
Geometry
- Grade
- 0.08
- Grade Unit
- g/t
- Intercept
- 6.35 m
- From
- 189.8 m
- To
- 196.15 m
Classification
- Sample Type
- drill
- Group ID
- HLD25-35:189.80-196.15
QA/QC
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-19T00:00:00.000Z
Reasoning: The gold grade is very weak and contributes minimally to the polymetallic nature of the sub-interval.
Positive factors
- Presence of gold as a byproduct
Negative factors
- True width unknown
- Cut-off grade undisclosed
Evidence · table
“0.08”
Context: 6.35
HLD25-35Haldane · leadGrade: 0.27Grade Unit: %Intercept: 6.35 mView all detailsHide details
Identity
- Hole ID
- HLD25-35
- Project
- Haldane
- Commodity
- lead
- Ticker
- SNAG
Geometry
- Grade
- 0.27
- Grade Unit
- %
- Intercept
- 6.35 m
- From
- 189.8 m
- To
- 196.15 m
Classification
- Sample Type
- drill
- Group ID
- HLD25-35:189.80-196.15
QA/QC
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-19T00:00:00.000Z
Reasoning: The lead grade is very weak and contributes minimally to the polymetallic nature of the sub-interval.
Positive factors
- Presence of lead as a byproduct
Negative factors
- True width unknown
- Cut-off grade undisclosed
Evidence · table
“0.27”
Context: 6.35
HLD25-35Haldane · zincGrade: 0.8Grade Unit: %Intercept: 6.35 mView all detailsHide details
Identity
- Hole ID
- HLD25-35
- Project
- Haldane
- Commodity
- zinc
- Ticker
- SNAG
Geometry
- Grade
- 0.8
- Grade Unit
- %
- Intercept
- 6.35 m
- From
- 189.8 m
- To
- 196.15 m
Classification
- Sample Type
- drill
- Group ID
- HLD25-35:189.80-196.15
QA/QC
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-19T00:00:00.000Z
Reasoning: The zinc grade is weak but contributes to the polymetallic nature of the sub-interval.
Positive factors
- Presence of zinc as a byproduct
Negative factors
- True width unknown
- Cut-off grade undisclosed
Evidence · table
“0.80”
Context: 6.35
HLD25-35Haldane · silverGrade: 642Grade Unit: g/tIntercept: 0.8 mView all detailsHide details
Identity
- Hole ID
- HLD25-35
- Project
- Haldane
- Commodity
- silver
- Ticker
- SNAG
Geometry
- Grade
- 642
- Grade Unit
- g/t
- Intercept
- 0.8 m
- From
- 191.4 m
- To
- 192.2 m
Classification
- Sample Type
- drill
- Group ID
- HLD25-35:191.40-192.20
QA/QC
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
Metal Equivalent
- Metal Eq. Grade
- 742
- Metal Eq. Unit
- g/t Silver Eq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-19T00:00:00.000Z
Reasoning: This sub-interval shows bonanza-grade silver over a very narrow width, significantly enhancing the overall intercept's value.
Positive factors
- Exceptional silver grade (642 g/t)
- High-grade sub-interval
Negative factors
- True width unknown
- Narrow intercept length (0.8 m)
- Metal equivalent assumptions not property-specific
- Cut-off grade undisclosed
Evidence · table
“642”
Context: 0.80
HLD25-35Haldane · goldGrade: 0.3Grade Unit: g/tIntercept: 0.8 mView all detailsHide details
Identity
- Hole ID
- HLD25-35
- Project
- Haldane
- Commodity
- gold
- Ticker
- SNAG
Geometry
- Grade
- 0.3
- Grade Unit
- g/t
- Intercept
- 0.8 m
- From
- 191.4 m
- To
- 192.2 m
Classification
- Sample Type
- drill
- Group ID
- HLD25-35:191.40-192.20
QA/QC
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-19T00:00:00.000Z
Reasoning: The gold grade is weak but contributes to the polymetallic nature of the sub-interval.
Positive factors
- Presence of gold as a byproduct
Negative factors
- True width unknown
- Cut-off grade undisclosed
Evidence · table
“0.30”
Context: 0.80
HLD25-35Haldane · leadGrade: 3.38Grade Unit: %Intercept: 0.8 mView all detailsHide details
Identity
- Hole ID
- HLD25-35
- Project
- Haldane
- Commodity
- lead
- Ticker
- SNAG
Geometry
- Grade
- 3.38
- Grade Unit
- %
- Intercept
- 0.8 m
- From
- 191.4 m
- To
- 192.2 m
Classification
- Sample Type
- drill
- Group ID
- HLD25-35:191.40-192.20
QA/QC
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-19T00:00:00.000Z
Reasoning: The lead grade is moderate within this sub-interval, contributing to the overall polymetallic value.
Positive factors
- Moderate lead grade within a sub-interval
Negative factors
- True width unknown
- Cut-off grade undisclosed
Evidence · table
“3.38”
Context: 0.80
HLD25-35Haldane · zincGrade: 4.57Grade Unit: %Intercept: 0.8 mView all detailsHide details
Identity
- Hole ID
- HLD25-35
- Project
- Haldane
- Commodity
- zinc
- Ticker
- SNAG
Geometry
- Grade
- 4.57
- Grade Unit
- %
- Intercept
- 0.8 m
- From
- 191.4 m
- To
- 192.2 m
Classification
- Sample Type
- drill
- Group ID
- HLD25-35:191.40-192.20
QA/QC
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-19T00:00:00.000Z
Reasoning: The zinc grade is moderate within this sub-interval, contributing to the overall polymetallic value.
Positive factors
- Moderate zinc grade within a sub-interval
Negative factors
- True width unknown
- Cut-off grade undisclosed
Evidence · table
“4.57”
Context: 0.80
HLD25-36Haldane · silverGrade: 228Grade Unit: g/tIntercept: 3.15 mView all detailsHide details
Identity
- Hole ID
- HLD25-36
- Project
- Haldane
- Commodity
- silver
- Ticker
- SNAG
Geometry
- Grade
- 228
- Grade Unit
- g/t
- Intercept
- 3.15 m
- From
- 161 m
- To
- 164.15 m
Classification
- Sample Type
- drill
- Group ID
- HLD25-36:161.00-164.15
QA/QC
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
Metal Equivalent
- Metal Eq. Grade
- 232
- Metal Eq. Unit
- g/t Silver Eq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-19T00:00:00.000Z
Reasoning: This intercept shows a moderate silver grade over a good width, contributing to the overall mineralization footprint.
Positive factors
- Moderate silver grade over a good width
Negative factors
- True width unknown
- Metal equivalent assumptions not property-specific
- Cut-off grade undisclosed
Evidence · table
“228”
Context: 3.15
HLD25-36Haldane · goldGrade: 0.1Grade Unit: g/tIntercept: 3.15 mView all detailsHide details
Identity
- Hole ID
- HLD25-36
- Project
- Haldane
- Commodity
- gold
- Ticker
- SNAG
Geometry
- Grade
- 0.1
- Grade Unit
- g/t
- Intercept
- 3.15 m
- From
- 161 m
- To
- 164.15 m
Classification
- Sample Type
- drill
- Group ID
- HLD25-36:161.00-164.15
QA/QC
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-19T00:00:00.000Z
Reasoning: The gold grade is weak but contributes to the polymetallic nature of the intercept.
Positive factors
- Presence of gold as a byproduct
Negative factors
- True width unknown
- Cut-off grade undisclosed
Evidence · table
“0.10”
Context: 3.15
HLD25-36Haldane · leadGrade: 0.48Grade Unit: %Intercept: 3.15 mView all detailsHide details
Identity
- Hole ID
- HLD25-36
- Project
- Haldane
- Commodity
- lead
- Ticker
- SNAG
Geometry
- Grade
- 0.48
- Grade Unit
- %
- Intercept
- 3.15 m
- From
- 161 m
- To
- 164.15 m
Classification
- Sample Type
- drill
- Group ID
- HLD25-36:161.00-164.15
QA/QC
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-19T00:00:00.000Z
Reasoning: The lead grade is weak but contributes to the polymetallic nature of the intercept.
Positive factors
- Presence of lead as a byproduct
Negative factors
- True width unknown
- Cut-off grade undisclosed
Evidence · table
“0.48”
Context: 3.15
HLD25-36Haldane · zincGrade: 0.45Grade Unit: %Intercept: 3.15 mView all detailsHide details
Identity
- Hole ID
- HLD25-36
- Project
- Haldane
- Commodity
- zinc
- Ticker
- SNAG
Geometry
- Grade
- 0.45
- Grade Unit
- %
- Intercept
- 3.15 m
- From
- 161 m
- To
- 164.15 m
Classification
- Sample Type
- drill
- Group ID
- HLD25-36:161.00-164.15
QA/QC
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-19T00:00:00.000Z
Reasoning: The zinc grade is weak but contributes to the polymetallic nature of the intercept.
Positive factors
- Presence of zinc as a byproduct
Negative factors
- True width unknown
- Cut-off grade undisclosed
Evidence · table
“0.45”
Context: 3.15
HLD25-36Haldane · silverGrade: 428Grade Unit: g/tIntercept: 9.1 mView all detailsHide details
Identity
- Hole ID
- HLD25-36
- Project
- Haldane
- Commodity
- silver
- Ticker
- SNAG
Geometry
- Grade
- 428
- Grade Unit
- g/t
- Intercept
- 9.1 m
- From
- 182.4 m
- To
- 191.5 m
Classification
- Sample Type
- drill
- Group ID
- HLD25-36:182.40-191.50
QA/QC
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
Metal Equivalent
- Metal Eq. Grade
- 557
- Metal Eq. Unit
- g/t Silver Eq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-19T00:00:00.000Z
Reasoning: This intercept shows a strong silver grade over a good width, contributing to the overall mineralization footprint.
Positive factors
- Strong silver grade over a good width
Negative factors
- True width unknown
- Metal equivalent assumptions not property-specific
- Cut-off grade undisclosed
Evidence · table
“428”
Context: 9.10
HLD25-36Haldane · goldGrade: 0.73Grade Unit: g/tIntercept: 9.1 mView all detailsHide details
Identity
- Hole ID
- HLD25-36
- Project
- Haldane
- Commodity
- gold
- Ticker
- SNAG
Geometry
- Grade
- 0.73
- Grade Unit
- g/t
- Intercept
- 9.1 m
- From
- 182.4 m
- To
- 191.5 m
Classification
- Sample Type
- drill
- Group ID
- HLD25-36:182.40-191.50
QA/QC
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-19T00:00:00.000Z
Reasoning: The gold grade is weak but contributes to the polymetallic nature of the intercept.
Positive factors
- Presence of gold as a byproduct
Negative factors
- True width unknown
- Cut-off grade undisclosed
Evidence · table
“0.73”
Context: 9.10
HLD25-36Haldane · leadGrade: 5.26Grade Unit: %Intercept: 9.1 mView all detailsHide details
Identity
- Hole ID
- HLD25-36
- Project
- Haldane
- Commodity
- lead
- Ticker
- SNAG
Geometry
- Grade
- 5.26
- Grade Unit
- %
- Intercept
- 9.1 m
- From
- 182.4 m
- To
- 191.5 m
Classification
- Sample Type
- drill
- Group ID
- HLD25-36:182.40-191.50
QA/QC
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-19T00:00:00.000Z
Reasoning: The lead grade is moderate over a good width, contributing to the polymetallic nature of the intercept.
Positive factors
- Moderate lead grade over a good width
Negative factors
- True width unknown
- Cut-off grade undisclosed
Evidence · table
“5.26”
Context: 9.10
HLD25-36Haldane · zincGrade: 1.73Grade Unit: %Intercept: 9.1 mView all detailsHide details
Identity
- Hole ID
- HLD25-36
- Project
- Haldane
- Commodity
- zinc
- Ticker
- SNAG
Geometry
- Grade
- 1.73
- Grade Unit
- %
- Intercept
- 9.1 m
- From
- 182.4 m
- To
- 191.5 m
Classification
- Sample Type
- drill
- Group ID
- HLD25-36:182.40-191.50
QA/QC
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-19T00:00:00.000Z
Reasoning: The zinc grade is weak but contributes to the polymetallic nature of the intercept.
Positive factors
- Presence of zinc as a byproduct
Negative factors
- True width unknown
- Cut-off grade undisclosed
Evidence · table
“1.73”
Context: 9.10
HLD25-36Haldane · silverGrade: 1069Grade Unit: g/tIntercept: 2.8 mView all detailsHide details
Identity
- Hole ID
- HLD25-36
- Project
- Haldane
- Commodity
- silver
- Ticker
- SNAG
Geometry
- Grade
- 1069
- Grade Unit
- g/t
- Intercept
- 2.8 m
- From
- 188 m
- To
- 190.8 m
Classification
- Sample Type
- drill
- Group ID
- HLD25-36:188.00-190.80
QA/QC
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
Metal Equivalent
- Metal Eq. Grade
- 1335
- Metal Eq. Unit
- g/t Silver Eq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-19T00:00:00.000Z
Reasoning: This sub-interval shows bonanza-grade silver over a good width, significantly enhancing the overall intercept's value.
Positive factors
- Exceptional silver grade (1069 g/t)
- High-grade sub-interval
Negative factors
- True width unknown
- Metal equivalent assumptions not property-specific
- Cut-off grade undisclosed
Evidence · table
“1069”
Context: 2.80
HLD25-36Haldane · goldGrade: 1.41Grade Unit: g/tIntercept: 2.8 mView all detailsHide details
Identity
- Hole ID
- HLD25-36
- Project
- Haldane
- Commodity
- gold
- Ticker
- SNAG
Geometry
- Grade
- 1.41
- Grade Unit
- g/t
- Intercept
- 2.8 m
- From
- 188 m
- To
- 190.8 m
Classification
- Sample Type
- drill
- Group ID
- HLD25-36:188.00-190.80
QA/QC
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-19T00:00:00.000Z
Reasoning: The gold grade is moderate within this high-grade sub-interval, contributing to the overall polymetallic value.
Positive factors
- Moderate gold grade within a high-grade sub-interval
Negative factors
- True width unknown
- Cut-off grade undisclosed
Evidence · table
“1.41”
Context: 2.80
HLD25-36Haldane · leadGrade: 12.6Grade Unit: %Intercept: 2.8 mView all detailsHide details
Identity
- Hole ID
- HLD25-36
- Project
- Haldane
- Commodity
- lead
- Ticker
- SNAG
Geometry
- Grade
- 12.6
- Grade Unit
- %
- Intercept
- 2.8 m
- From
- 188 m
- To
- 190.8 m
Classification
- Sample Type
- drill
- Group ID
- HLD25-36:188.00-190.80
QA/QC
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-19T00:00:00.000Z
Reasoning: The lead grade is exceptional within this high-grade sub-interval, significantly contributing to the overall polymetallic value.
Positive factors
- Exceptional lead grade within a high-grade sub-interval
Negative factors
- True width unknown
- Cut-off grade undisclosed
Evidence · table
“12.60”
Context: 2.80
HLD25-36Haldane · zincGrade: 3.02Grade Unit: %Intercept: 2.8 mView all detailsHide details
Identity
- Hole ID
- HLD25-36
- Project
- Haldane
- Commodity
- zinc
- Ticker
- SNAG
Geometry
- Grade
- 3.02
- Grade Unit
- %
- Intercept
- 2.8 m
- From
- 188 m
- To
- 190.8 m
Classification
- Sample Type
- drill
- Group ID
- HLD25-36:188.00-190.80
QA/QC
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-19T00:00:00.000Z
Reasoning: The zinc grade is moderate within this high-grade sub-interval, contributing to the overall polymetallic value.
Positive factors
- Moderate zinc grade within a high-grade sub-interval
Negative factors
- True width unknown
- Cut-off grade undisclosed
Evidence · table
“3.02”
Context: 2.80
HLD25-38Haldane · silverGrade: 406Grade Unit: g/tIntercept: 1.5 mView all detailsHide details
Identity
- Hole ID
- HLD25-38
- Project
- Haldane
- Commodity
- silver
- Ticker
- SNAG
Geometry
- Grade
- 406
- Grade Unit
- g/t
- Intercept
- 1.5 m
- From
- 177 m
- To
- 178.5 m
Classification
- Sample Type
- drill
- Group ID
- HLD25-38:177.00-178.50
QA/QC
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
Metal Equivalent
- Metal Eq. Grade
- 436
- Metal Eq. Unit
- g/t Silver Eq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-19T00:00:00.000Z
Reasoning: This intercept shows a moderate silver grade over a narrow width, contributing to the overall mineralization footprint.
Positive factors
- Moderate silver grade over a narrow width
Negative factors
- True width unknown
- Narrow intercept length (1.5 m)
- Metal equivalent assumptions not property-specific
- Cut-off grade undisclosed
Evidence · table
“406”
Context: 1.50
HLD25-38Haldane · goldGrade: 0.1Grade Unit: g/tIntercept: 1.5 mView all detailsHide details
Identity
- Hole ID
- HLD25-38
- Project
- Haldane
- Commodity
- gold
- Ticker
- SNAG
Geometry
- Grade
- 0.1
- Grade Unit
- g/t
- Intercept
- 1.5 m
- From
- 177 m
- To
- 178.5 m
Classification
- Sample Type
- drill
- Group ID
- HLD25-38:177.00-178.50
QA/QC
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-19T00:00:00.000Z
Reasoning: The gold grade is weak but contributes to the polymetallic nature of the intercept.
Positive factors
- Presence of gold as a byproduct
Negative factors
- True width unknown
- Cut-off grade undisclosed
Evidence · table
“0.10”
Context: 1.50
HLD25-38Haldane · leadGrade: 3.13Grade Unit: %Intercept: 1.5 mView all detailsHide details
Identity
- Hole ID
- HLD25-38
- Project
- Haldane
- Commodity
- lead
- Ticker
- SNAG
Geometry
- Grade
- 3.13
- Grade Unit
- %
- Intercept
- 1.5 m
- From
- 177 m
- To
- 178.5 m
Classification
- Sample Type
- drill
- Group ID
- HLD25-38:177.00-178.50
QA/QC
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-19T00:00:00.000Z
Reasoning: The lead grade is moderate over a narrow width, contributing to the polymetallic nature of the intercept.
Positive factors
- Moderate lead grade over a narrow width
Negative factors
- True width unknown
- Cut-off grade undisclosed
Evidence · table
“3.13”
Context: 1.50
HLD25-38Haldane · zincGrade: 0.18Grade Unit: %Intercept: 1.5 mView all detailsHide details
Identity
- Hole ID
- HLD25-38
- Project
- Haldane
- Commodity
- zinc
- Ticker
- SNAG
Geometry
- Grade
- 0.18
- Grade Unit
- %
- Intercept
- 1.5 m
- From
- 177 m
- To
- 178.5 m
Classification
- Sample Type
- drill
- Group ID
- HLD25-38:177.00-178.50
QA/QC
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-19T00:00:00.000Z
Reasoning: The zinc grade is very weak and contributes minimally to the polymetallic nature of the intercept.
Positive factors
- Presence of zinc as a byproduct
Negative factors
- True width unknown
- Cut-off grade undisclosed
Evidence · table
“0.18”
Context: 1.50
HLD25-38Haldane · silverGrade: 71Grade Unit: g/tIntercept: 22 mView all detailsHide details
Identity
- Hole ID
- HLD25-38
- Project
- Haldane
- Commodity
- silver
- Ticker
- SNAG
Geometry
- Grade
- 71
- Grade Unit
- g/t
- Intercept
- 22 m
- From
- 196.3 m
- To
- 218.3 m
Classification
- Sample Type
- drill
- Group ID
- HLD25-38:196.30-218.30
QA/QC
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
Metal Equivalent
- Metal Eq. Grade
- 114
- Metal Eq. Unit
- g/t Silver Eq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-19T00:00:00.000Z
Reasoning: This intercept shows weak silver mineralization over a significant width, but the grade is low.
Positive factors
- Presence of silver mineralization over a significant width
Negative factors
- True width unknown
- Low silver grade
- Metal equivalent assumptions not property-specific
- Cut-off grade undisclosed
Evidence · table
“71”
Context: 22.00
HLD25-38Haldane · goldGrade: 0.17Grade Unit: g/tIntercept: 22 mView all detailsHide details
Identity
- Hole ID
- HLD25-38
- Project
- Haldane
- Commodity
- gold
- Ticker
- SNAG
Geometry
- Grade
- 0.17
- Grade Unit
- g/t
- Intercept
- 22 m
- From
- 196.3 m
- To
- 218.3 m
Classification
- Sample Type
- drill
- Group ID
- HLD25-38:196.30-218.30
QA/QC
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-19T00:00:00.000Z
Reasoning: The gold grade is weak but contributes to the polymetallic nature of the intercept.
Positive factors
- Presence of gold as a byproduct
Negative factors
- True width unknown
- Cut-off grade undisclosed
Evidence · table
“0.17”
Context: 22.00
HLD25-38Haldane · leadGrade: 1.56Grade Unit: %Intercept: 22 mView all detailsHide details
Identity
- Hole ID
- HLD25-38
- Project
- Haldane
- Commodity
- lead
- Ticker
- SNAG
Geometry
- Grade
- 1.56
- Grade Unit
- %
- Intercept
- 22 m
- From
- 196.3 m
- To
- 218.3 m
Classification
- Sample Type
- drill
- Group ID
- HLD25-38:196.30-218.30
QA/QC
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-19T00:00:00.000Z
Reasoning: The lead grade is weak but contributes to the polymetallic nature of the intercept.
Positive factors
- Presence of lead as a byproduct
Negative factors
- True width unknown
- Cut-off grade undisclosed
Evidence · table
“1.56”
Context: 22.00
HLD25-38Haldane · zincGrade: 0.76Grade Unit: %Intercept: 22 mView all detailsHide details
Identity
- Hole ID
- HLD25-38
- Project
- Haldane
- Commodity
- zinc
- Ticker
- SNAG
Geometry
- Grade
- 0.76
- Grade Unit
- %
- Intercept
- 22 m
- From
- 196.3 m
- To
- 218.3 m
Classification
- Sample Type
- drill
- Group ID
- HLD25-38:196.30-218.30
QA/QC
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-19T00:00:00.000Z
Reasoning: The zinc grade is weak but contributes to the polymetallic nature of the intercept.
Positive factors
- Presence of zinc as a byproduct
Negative factors
- True width unknown
- Cut-off grade undisclosed
Evidence · table
“0.76”
Context: 22.00
HLD25-38Haldane · silverGrade: 140Grade Unit: g/tIntercept: 9.5 mView all detailsHide details
Identity
- Hole ID
- HLD25-38
- Project
- Haldane
- Commodity
- silver
- Ticker
- SNAG
Geometry
- Grade
- 140
- Grade Unit
- g/t
- Intercept
- 9.5 m
- From
- 198 m
- To
- 207.5 m
Classification
- Sample Type
- drill
- Group ID
- HLD25-38:198.00-207.50
QA/QC
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
Metal Equivalent
- Metal Eq. Grade
- 227
- Metal Eq. Unit
- g/t Silver Eq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-19T00:00:00.000Z
Reasoning: This sub-interval shows a moderate silver grade over a good width, enhancing the overall intercept's value.
Positive factors
- Moderate silver grade over a good width
- High-grade sub-interval within a broader intercept
Negative factors
- True width unknown
- Metal equivalent assumptions not property-specific
- Cut-off grade undisclosed
Evidence · table
“140”
Context: 9.50
HLD25-38Haldane · goldGrade: 0.29Grade Unit: g/tIntercept: 9.5 mView all detailsHide details
Identity
- Hole ID
- HLD25-38
- Project
- Haldane
- Commodity
- gold
- Ticker
- SNAG
Geometry
- Grade
- 0.29
- Grade Unit
- g/t
- Intercept
- 9.5 m
- From
- 198 m
- To
- 207.5 m
Classification
- Sample Type
- drill
- Group ID
- HLD25-38:198.00-207.50
QA/QC
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-19T00:00:00.000Z
Reasoning: The gold grade is weak but contributes to the polymetallic nature of the sub-interval.
Positive factors
- Presence of gold as a byproduct
Negative factors
- True width unknown
- Cut-off grade undisclosed
Evidence · table
“0.29”
Context: 9.50
HLD25-38Haldane · leadGrade: 3.44Grade Unit: %Intercept: 9.5 mView all detailsHide details
Identity
- Hole ID
- HLD25-38
- Project
- Haldane
- Commodity
- lead
- Ticker
- SNAG
Geometry
- Grade
- 3.44
- Grade Unit
- %
- Intercept
- 9.5 m
- From
- 198 m
- To
- 207.5 m
Classification
- Sample Type
- drill
- Group ID
- HLD25-38:198.00-207.50
QA/QC
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-19T00:00:00.000Z
Reasoning: The lead grade is moderate over a good width, contributing to the polymetallic nature of the sub-interval.
Positive factors
- Moderate lead grade over a good width
Negative factors
- True width unknown
- Cut-off grade undisclosed
Evidence · table
“3.44”
Context: 9.50
HLD25-38Haldane · zincGrade: 1.34Grade Unit: %Intercept: 9.5 mView all detailsHide details
Identity
- Hole ID
- HLD25-38
- Project
- Haldane
- Commodity
- zinc
- Ticker
- SNAG
Geometry
- Grade
- 1.34
- Grade Unit
- %
- Intercept
- 9.5 m
- From
- 198 m
- To
- 207.5 m
Classification
- Sample Type
- drill
- Group ID
- HLD25-38:198.00-207.50
QA/QC
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-19T00:00:00.000Z
Reasoning: The zinc grade is weak but contributes to the polymetallic nature of the sub-interval.
Positive factors
- Presence of zinc as a byproduct
Negative factors
- True width unknown
- Cut-off grade undisclosed
Evidence · table
“1.34”
Context: 9.50
HLD25-38Haldane · silverGrade: 437Grade Unit: g/tIntercept: 1.9 mView all detailsHide details
Identity
- Hole ID
- HLD25-38
- Project
- Haldane
- Commodity
- silver
- Ticker
- SNAG
Geometry
- Grade
- 437
- Grade Unit
- g/t
- Intercept
- 1.9 m
- From
- 203.6 m
- To
- 205.5 m
Classification
- Sample Type
- drill
- Group ID
- HLD25-38:203.60-205.50
QA/QC
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
Metal Equivalent
- Metal Eq. Grade
- 740
- Metal Eq. Unit
- g/t Silver Eq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-19T00:00:00.000Z
Reasoning: This sub-interval shows a strong silver grade over a good width, enhancing the overall intercept's value.
Positive factors
- Strong silver grade over a good width
- High-grade sub-interval
Negative factors
- True width unknown
- Metal equivalent assumptions not property-specific
- Cut-off grade undisclosed
Evidence · table
“437”
Context: 1.90
HLD25-38Haldane · goldGrade: 0.35Grade Unit: g/tIntercept: 1.9 mView all detailsHide details
Identity
- Hole ID
- HLD25-38
- Project
- Haldane
- Commodity
- gold
- Ticker
- SNAG
Geometry
- Grade
- 0.35
- Grade Unit
- g/t
- Intercept
- 1.9 m
- From
- 203.6 m
- To
- 205.5 m
Classification
- Sample Type
- drill
- Group ID
- HLD25-38:203.60-205.50
QA/QC
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-19T00:00:00.000Z
Reasoning: The gold grade is weak but contributes to the polymetallic nature of the sub-interval.
Positive factors
- Presence of gold as a byproduct
Negative factors
- True width unknown
- Cut-off grade undisclosed
Evidence · table
“0.35”
Context: 1.90
HLD25-38Haldane · leadGrade: 14.55Grade Unit: %Intercept: 1.9 mView all detailsHide details
Identity
- Hole ID
- HLD25-38
- Project
- Haldane
- Commodity
- lead
- Ticker
- SNAG
Geometry
- Grade
- 14.55
- Grade Unit
- %
- Intercept
- 1.9 m
- From
- 203.6 m
- To
- 205.5 m
Classification
- Sample Type
- drill
- Group ID
- HLD25-38:203.60-205.50
QA/QC
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-19T00:00:00.000Z
Reasoning: The lead grade is exceptional within this high-grade sub-interval, significantly contributing to the overall polymetallic value.
Positive factors
- Exceptional lead grade within a high-grade sub-interval
Negative factors
- True width unknown
- Cut-off grade undisclosed
Evidence · table
“14.55”
Context: 1.90
HLD25-38Haldane · zincGrade: 4.04Grade Unit: %Intercept: 1.9 mView all detailsHide details
Identity
- Hole ID
- HLD25-38
- Project
- Haldane
- Commodity
- zinc
- Ticker
- SNAG
Geometry
- Grade
- 4.04
- Grade Unit
- %
- Intercept
- 1.9 m
- From
- 203.6 m
- To
- 205.5 m
Classification
- Sample Type
- drill
- Group ID
- HLD25-38:203.60-205.50
QA/QC
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-19T00:00:00.000Z
Reasoning: The zinc grade is moderate within this high-grade sub-interval, contributing to the overall polymetallic value.
Positive factors
- Moderate zinc grade within a high-grade sub-interval
Negative factors
- True width unknown
- Cut-off grade undisclosed
Evidence · table
“4.04”
Context: 1.90
Fact 97Veronica · silverGrade: 17.15Grade Unit: g/tView all detailsHide details
Identity
- Project
- Veronica
- Commodity
- silver
- Ticker
- SNAG
Geometry
- Grade
- 17.15
- Grade Unit
- g/t
Classification
- Sample Type
- surface
QA/QC
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-19T00:00:00.000Z
Reasoning: This weak silver grade from an outcrop grab sample indicates the presence of mineralization at surface.
Positive factors
- Presence of silver mineralization in outcrop
Negative factors
- Surface grab sample, not drill core
- Limited representativeness of grab sample
Evidence · text
“17.15 g/t Ag”
Fact 98Veronica · goldGrade: 0.412Grade Unit: g/tView all detailsHide details
Identity
- Project
- Veronica
- Commodity
- gold
- Ticker
- SNAG
Geometry
- Grade
- 0.412
- Grade Unit
- g/t
Classification
- Sample Type
- surface
QA/QC
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-19T00:00:00.000Z
Reasoning: The gold grade is weak but contributes to the polymetallic nature of the surface sample.
Positive factors
- Presence of gold as a byproduct in surface sample
Negative factors
- Surface sample, not drill core
- Limited representativeness of cobble sample
Evidence · text
“0.412 g/t Au”
Fact 99Veronica · leadGrade: 0.71Grade Unit: %View all detailsHide details
Identity
- Project
- Veronica
- Commodity
- lead
- Ticker
- SNAG
Geometry
- Grade
- 0.71
- Grade Unit
- %
Classification
- Sample Type
- surface
QA/QC
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-19T00:00:00.000Z
Reasoning: The lead grade is weak but indicates its presence in the polymetallic outcrop sample.
Positive factors
- Presence of lead as a byproduct in outcrop
Negative factors
- Surface grab sample, not drill core
- Limited representativeness of grab sample
Evidence · text
“0.71% Pb”
Fact 100Veronica · copperGrade: 0.13Grade Unit: %View all detailsHide details
Identity
- Project
- Veronica
- Commodity
- copper
- Ticker
- SNAG
Geometry
- Grade
- 0.13
- Grade Unit
- %
Classification
- Sample Type
- surface
QA/QC
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-19T00:00:00.000Z
Reasoning: The copper grade is weak but indicates its presence in the polymetallic surface sample.
Positive factors
- Presence of copper as a byproduct in surface sample
Negative factors
- Surface sample, not drill core
- Limited representativeness of cobble sample
Evidence · text
“0.13% Cu”
Fact 101Veronica · zincGrade: 0.17Grade Unit: %View all detailsHide details
Identity
- Project
- Veronica
- Commodity
- zinc
- Ticker
- SNAG
Geometry
- Grade
- 0.17
- Grade Unit
- %
Classification
- Sample Type
- surface
QA/QC
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-19T00:00:00.000Z
Reasoning: The zinc grade is weak but indicates its presence in the polymetallic outcrop sample.
Positive factors
- Presence of zinc as a byproduct in outcrop
Negative factors
- Surface grab sample, not drill core
- Limited representativeness of grab sample
Evidence · text
“0.17% Zn”
Fact 102Veronica · antimonyGrade: 22.3Grade Unit: ppmView all detailsHide details
Identity
- Project
- Veronica
- Commodity
- antimony
- Ticker
- SNAG
Geometry
- Grade
- 22.3
- Grade Unit
- ppm
Classification
- Sample Type
- surface
QA/QC
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-19T00:00:00.000Z
Reasoning: The antimony grade is weak but indicates its presence in the polymetallic outcrop sample.
Positive factors
- Presence of antimony as a byproduct in outcrop
Negative factors
- Surface grab sample, not drill core
- Limited representativeness of grab sample
Evidence · text
“22.3 ppm Sb”
inclHaldane · silverGrade: 2014Grade Unit: g/tIntercept: 3.2 mView all detailsHide details
Identity
- Hole ID
- incl
- Project
- Haldane
- Commodity
- silver
- Ticker
- SNAG
Geometry
- Grade
- 2014
- Grade Unit
- g/t
- Intercept
- 3.2 m
- From
- 251.8 m
- To
- 255 m
Classification
- Sample Type
- drill
- Group ID
- incl:251.8-255
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-19T00:00:00.000Z
Reasoning: Expanded from assay table. 2014 g/t silver is exceptional against the default band [500, 200, 100, 30] g/t. Grade×width 6444.8 g/t·m is strong (grade alone is exceptional; the better of the two is used).
Positive factors
- 2014 g/t silver is exceptional on the default band.
Negative factors
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“2014”
Context: incl
inclHaldane · goldGrade: 1.72Grade Unit: g/tIntercept: 3.2 mView all detailsHide details
Identity
- Hole ID
- incl
- Project
- Haldane
- Commodity
- gold
- Ticker
- SNAG
Geometry
- Grade
- 1.72
- Grade Unit
- g/t
- Intercept
- 3.2 m
- From
- 251.8 m
- To
- 255 m
Classification
- Sample Type
- drill
- Group ID
- incl:251.8-255
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-19T00:00:00.000Z
Reasoning: Expanded from assay table. 1.72 g/t gold is moderate against the default band [5, 2, 1, 0.3] g/t. Grade×width 5.5 g/t·m is below (grade alone is moderate; the better of the two is used).
Negative factors
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“1.72”
Context: incl
inclHaldane · leadGrade: 4.73Grade Unit: %Intercept: 3.2 mView all detailsHide details
Identity
- Hole ID
- incl
- Project
- Haldane
- Commodity
- lead
- Ticker
- SNAG
Geometry
- Grade
- 4.73
- Grade Unit
- %
- Intercept
- 3.2 m
- From
- 251.8 m
- To
- 255 m
Classification
- Sample Type
- drill
- Group ID
- incl:251.8-255
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-19T00:00:00.000Z
Reasoning: Expanded from assay table. 4.73 % lead is moderate against the default band [10, 6, 3, 1] %. Grade×width 15.1 %·m is weak (grade alone is moderate; the better of the two is used).
Negative factors
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“4.73”
Context: incl
inclHaldane · zincGrade: 1.1Grade Unit: %Intercept: 3.2 mView all detailsHide details
Identity
- Hole ID
- incl
- Project
- Haldane
- Commodity
- zinc
- Ticker
- SNAG
Geometry
- Grade
- 1.1
- Grade Unit
- %
- Intercept
- 3.2 m
- From
- 251.8 m
- To
- 255 m
Classification
- Sample Type
- drill
- Group ID
- incl:251.8-255
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-19T00:00:00.000Z
Reasoning: Expanded from assay table. 1.1 % zinc is below against the default band [18, 10, 5, 2] %. Grade×width 3.5 %·m is below.
Negative factors
- 1.1 % zinc is below the weak threshold (2 %) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“1.10”
Context: incl
inclHaldane · silverGrade: 1112Grade Unit: g/tIntercept: 1.25 mView all detailsHide details
Identity
- Hole ID
- incl
- Project
- Haldane
- Commodity
- silver
- Ticker
- SNAG
Geometry
- Grade
- 1112
- Grade Unit
- g/t
- Intercept
- 1.25 m
- From
- 256.1 m
- To
- 257.35 m
Classification
- Sample Type
- drill
- Group ID
- incl:256.1-257.35
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-19T00:00:00.000Z
Reasoning: Expanded from assay table. 1112 g/t silver is exceptional against the default band [500, 200, 100, 30] g/t. Grade×width 1390.0 g/t·m is moderate (grade alone is exceptional; the better of the two is used).
Positive factors
- 1112 g/t silver is exceptional on the default band.
Negative factors
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“1112”
Context: incl
inclHaldane · goldGrade: 4.61Grade Unit: g/tIntercept: 1.25 mView all detailsHide details
Identity
- Hole ID
- incl
- Project
- Haldane
- Commodity
- gold
- Ticker
- SNAG
Geometry
- Grade
- 4.61
- Grade Unit
- g/t
- Intercept
- 1.25 m
- From
- 256.1 m
- To
- 257.35 m
Classification
- Sample Type
- drill
- Group ID
- incl:256.1-257.35
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-19T00:00:00.000Z
Reasoning: Expanded from assay table. 4.61 g/t gold is strong against the default band [5, 2, 1, 0.3] g/t. Grade×width 5.8 g/t·m is below (grade alone is strong; the better of the two is used).
Positive factors
- 4.61 g/t gold is strong on the default band.
Negative factors
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“4.61”
Context: incl
inclHaldane · leadGrade: 7.11Grade Unit: %Intercept: 1.25 mView all detailsHide details
Identity
- Hole ID
- incl
- Project
- Haldane
- Commodity
- lead
- Ticker
- SNAG
Geometry
- Grade
- 7.11
- Grade Unit
- %
- Intercept
- 1.25 m
- From
- 256.1 m
- To
- 257.35 m
Classification
- Sample Type
- drill
- Group ID
- incl:256.1-257.35
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-19T00:00:00.000Z
Reasoning: Expanded from assay table. 7.11 % lead is strong against the default band [10, 6, 3, 1] %. Grade×width 8.9 %·m is below (grade alone is strong; the better of the two is used).
Positive factors
- 7.11 % lead is strong on the default band.
Negative factors
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“7.11”
Context: incl
inclHaldane · zincGrade: 1.51Grade Unit: %Intercept: 1.25 mView all detailsHide details
Identity
- Hole ID
- incl
- Project
- Haldane
- Commodity
- zinc
- Ticker
- SNAG
Geometry
- Grade
- 1.51
- Grade Unit
- %
- Intercept
- 1.25 m
- From
- 256.1 m
- To
- 257.35 m
Classification
- Sample Type
- drill
- Group ID
- incl:256.1-257.35
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-19T00:00:00.000Z
Reasoning: Expanded from assay table. 1.51 % zinc is below against the default band [18, 10, 5, 2] %. Grade×width 1.9 %·m is below.
Negative factors
- 1.51 % zinc is below the weak threshold (2 %) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“1.51”
Context: incl
inclHaldane · silverGrade: 326Grade Unit: g/tIntercept: 6.5 mView all detailsHide details
Identity
- Hole ID
- incl
- Project
- Haldane
- Commodity
- silver
- Ticker
- SNAG
Geometry
- Grade
- 326
- Grade Unit
- g/t
- Intercept
- 6.5 m
- From
- 165.1 m
- To
- 171.6 m
Classification
- Sample Type
- drill
- Group ID
- incl:165.1-171.6
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-19T00:00:00.000Z
Reasoning: Expanded from assay table. 326 g/t silver is strong against the default band [500, 200, 100, 30] g/t. Grade×width 2119.0 g/t·m is moderate (grade alone is strong; the better of the two is used).
Positive factors
- 326 g/t silver is strong on the default band.
Negative factors
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“326”
Context: incl
inclHaldane · goldGrade: 0.19Grade Unit: g/tIntercept: 6.5 mView all detailsHide details
Identity
- Hole ID
- incl
- Project
- Haldane
- Commodity
- gold
- Ticker
- SNAG
Geometry
- Grade
- 0.19
- Grade Unit
- g/t
- Intercept
- 6.5 m
- From
- 165.1 m
- To
- 171.6 m
Classification
- Sample Type
- drill
- Group ID
- incl:165.1-171.6
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-19T00:00:00.000Z
Reasoning: Expanded from assay table. 0.19 g/t gold is below against the default band [5, 2, 1, 0.3] g/t. Grade×width 1.2 g/t·m is below.
Negative factors
- 0.19 g/t gold is below the weak threshold (0.3 g/t) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.19”
Context: incl
inclHaldane · leadGrade: 0.81Grade Unit: %Intercept: 6.5 mView all detailsHide details
Identity
- Hole ID
- incl
- Project
- Haldane
- Commodity
- lead
- Ticker
- SNAG
Geometry
- Grade
- 0.81
- Grade Unit
- %
- Intercept
- 6.5 m
- From
- 165.1 m
- To
- 171.6 m
Classification
- Sample Type
- drill
- Group ID
- incl:165.1-171.6
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-19T00:00:00.000Z
Reasoning: Expanded from assay table. 0.81 % lead is below against the default band [10, 6, 3, 1] %. Grade×width 5.3 %·m is below.
Negative factors
- 0.81 % lead is below the weak threshold (1 %) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.81”
Context: incl
inclHaldane · zincGrade: 1.3Grade Unit: %Intercept: 6.5 mView all detailsHide details
Identity
- Hole ID
- incl
- Project
- Haldane
- Commodity
- zinc
- Ticker
- SNAG
Geometry
- Grade
- 1.3
- Grade Unit
- %
- Intercept
- 6.5 m
- From
- 165.1 m
- To
- 171.6 m
Classification
- Sample Type
- drill
- Group ID
- incl:165.1-171.6
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-19T00:00:00.000Z
Reasoning: Expanded from assay table. 1.3 % zinc is below against the default band [18, 10, 5, 2] %. Grade×width 8.5 %·m is below.
Negative factors
- 1.3 % zinc is below the weak threshold (2 %) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“1.30”
Context: incl
a nd inclHaldane · silverGrade: 1438Grade Unit: g/tIntercept: 0.8 mView all detailsHide details
Identity
- Hole ID
- a nd incl
- Project
- Haldane
- Commodity
- silver
- Ticker
- SNAG
Geometry
- Grade
- 1438
- Grade Unit
- g/t
- Intercept
- 0.8 m
- From
- 169 m
- To
- 169.8 m
Classification
- Sample Type
- drill
- Group ID
- a nd incl:169-169.8
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-19T00:00:00.000Z
Reasoning: Expanded from assay table. 1438 g/t silver is exceptional against the default band [500, 200, 100, 30] g/t. Grade×width 1150.4 g/t·m is moderate (grade alone is exceptional; the better of the two is used).
Positive factors
- 1438 g/t silver is exceptional on the default band.
Negative factors
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“1438”
Context: a nd incl
a nd inclHaldane · goldGrade: 0.51Grade Unit: g/tIntercept: 0.8 mView all detailsHide details
Identity
- Hole ID
- a nd incl
- Project
- Haldane
- Commodity
- gold
- Ticker
- SNAG
Geometry
- Grade
- 0.51
- Grade Unit
- g/t
- Intercept
- 0.8 m
- From
- 169 m
- To
- 169.8 m
Classification
- Sample Type
- drill
- Group ID
- a nd incl:169-169.8
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-19T00:00:00.000Z
Reasoning: Expanded from assay table. 0.51 g/t gold is weak against the default band [5, 2, 1, 0.3] g/t. Grade×width 0.4 g/t·m is below (grade alone is weak; the better of the two is used).
Negative factors
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.51”
Context: a nd incl
a nd inclHaldane · leadGrade: 2.78Grade Unit: %Intercept: 0.8 mView all detailsHide details
Identity
- Hole ID
- a nd incl
- Project
- Haldane
- Commodity
- lead
- Ticker
- SNAG
Geometry
- Grade
- 2.78
- Grade Unit
- %
- Intercept
- 0.8 m
- From
- 169 m
- To
- 169.8 m
Classification
- Sample Type
- drill
- Group ID
- a nd incl:169-169.8
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-19T00:00:00.000Z
Reasoning: Expanded from assay table. 2.78 % lead is weak against the default band [10, 6, 3, 1] %. Grade×width 2.2 %·m is below (grade alone is weak; the better of the two is used).
Negative factors
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“2.78”
Context: a nd incl
a nd inclHaldane · zincGrade: 1.6Grade Unit: %Intercept: 0.8 mView all detailsHide details
Identity
- Hole ID
- a nd incl
- Project
- Haldane
- Commodity
- zinc
- Ticker
- SNAG
Geometry
- Grade
- 1.6
- Grade Unit
- %
- Intercept
- 0.8 m
- From
- 169 m
- To
- 169.8 m
Classification
- Sample Type
- drill
- Group ID
- a nd incl:169-169.8
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-19T00:00:00.000Z
Reasoning: Expanded from assay table. 1.6 % zinc is below against the default band [18, 10, 5, 2] %. Grade×width 1.3 %·m is below.
Negative factors
- 1.6 % zinc is below the weak threshold (2 %) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“1.60”
Context: a nd incl
inclHaldane · silverGrade: 311Grade Unit: g/tIntercept: 2.45 mView all detailsHide details
Identity
- Hole ID
- incl
- Project
- Haldane
- Commodity
- silver
- Ticker
- SNAG
Geometry
- Grade
- 311
- Grade Unit
- g/t
- Intercept
- 2.45 m
- From
- 195.35 m
- To
- 197.8 m
Classification
- Sample Type
- drill
- Group ID
- incl:195.35-197.8
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-19T00:00:00.000Z
Reasoning: Expanded from assay table. 311 g/t silver is strong against the default band [500, 200, 100, 30] g/t. Grade×width 762.0 g/t·m is weak (grade alone is strong; the better of the two is used).
Positive factors
- 311 g/t silver is strong on the default band.
Negative factors
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“311”
Context: incl
inclHaldane · goldGrade: 0.17Grade Unit: g/tIntercept: 2.45 mView all detailsHide details
Identity
- Hole ID
- incl
- Project
- Haldane
- Commodity
- gold
- Ticker
- SNAG
Geometry
- Grade
- 0.17
- Grade Unit
- g/t
- Intercept
- 2.45 m
- From
- 195.35 m
- To
- 197.8 m
Classification
- Sample Type
- drill
- Group ID
- incl:195.35-197.8
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-19T00:00:00.000Z
Reasoning: Expanded from assay table. 0.17 g/t gold is below against the default band [5, 2, 1, 0.3] g/t. Grade×width 0.4 g/t·m is below.
Negative factors
- 0.17 g/t gold is below the weak threshold (0.3 g/t) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.17”
Context: incl
inclHaldane · leadGrade: 1.51Grade Unit: %Intercept: 2.45 mView all detailsHide details
Identity
- Hole ID
- incl
- Project
- Haldane
- Commodity
- lead
- Ticker
- SNAG
Geometry
- Grade
- 1.51
- Grade Unit
- %
- Intercept
- 2.45 m
- From
- 195.35 m
- To
- 197.8 m
Classification
- Sample Type
- drill
- Group ID
- incl:195.35-197.8
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-19T00:00:00.000Z
Reasoning: Expanded from assay table. 1.51 % lead is weak against the default band [10, 6, 3, 1] %. Grade×width 3.7 %·m is below (grade alone is weak; the better of the two is used).
Negative factors
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“1.51”
Context: incl
inclHaldane · zincGrade: 3.27Grade Unit: %Intercept: 2.45 mView all detailsHide details
Identity
- Hole ID
- incl
- Project
- Haldane
- Commodity
- zinc
- Ticker
- SNAG
Geometry
- Grade
- 3.27
- Grade Unit
- %
- Intercept
- 2.45 m
- From
- 195.35 m
- To
- 197.8 m
Classification
- Sample Type
- drill
- Group ID
- incl:195.35-197.8
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-19T00:00:00.000Z
Reasoning: Expanded from assay table. 3.27 % zinc is weak against the default band [18, 10, 5, 2] %. Grade×width 8.0 %·m is below (grade alone is weak; the better of the two is used).
Negative factors
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“3.27”
Context: incl
inclHaldane · silverGrade: 196Grade Unit: g/tIntercept: 9.2 mView all detailsHide details
Identity
- Hole ID
- incl
- Project
- Haldane
- Commodity
- silver
- Ticker
- SNAG
Geometry
- Grade
- 196
- Grade Unit
- g/t
- Intercept
- 9.2 m
- From
- 159 m
- To
- 168.2 m
Classification
- Sample Type
- drill
- Group ID
- incl:159-168.2
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-19T00:00:00.000Z
Reasoning: Expanded from assay table. 196 g/t silver is moderate against the default band [500, 200, 100, 30] g/t. Grade×width 1803.2 g/t·m is moderate.
Negative factors
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“196”
Context: incl
inclHaldane · goldGrade: 0.19Grade Unit: g/tIntercept: 9.2 mView all detailsHide details
Identity
- Hole ID
- incl
- Project
- Haldane
- Commodity
- gold
- Ticker
- SNAG
Geometry
- Grade
- 0.19
- Grade Unit
- g/t
- Intercept
- 9.2 m
- From
- 159 m
- To
- 168.2 m
Classification
- Sample Type
- drill
- Group ID
- incl:159-168.2
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-19T00:00:00.000Z
Reasoning: Expanded from assay table. 0.19 g/t gold is below against the default band [5, 2, 1, 0.3] g/t. Grade×width 1.7 g/t·m is below.
Negative factors
- 0.19 g/t gold is below the weak threshold (0.3 g/t) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.19”
Context: incl
inclHaldane · leadGrade: 3.22Grade Unit: %Intercept: 9.2 mView all detailsHide details
Identity
- Hole ID
- incl
- Project
- Haldane
- Commodity
- lead
- Ticker
- SNAG
Geometry
- Grade
- 3.22
- Grade Unit
- %
- Intercept
- 9.2 m
- From
- 159 m
- To
- 168.2 m
Classification
- Sample Type
- drill
- Group ID
- incl:159-168.2
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-19T00:00:00.000Z
Reasoning: Expanded from assay table. 3.22 % lead is moderate against the default band [10, 6, 3, 1] %. Grade×width 29.6 %·m is weak (grade alone is moderate; the better of the two is used).
Negative factors
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“3.22”
Context: incl
inclHaldane · zincGrade: 0.76Grade Unit: %Intercept: 9.2 mView all detailsHide details
Identity
- Hole ID
- incl
- Project
- Haldane
- Commodity
- zinc
- Ticker
- SNAG
Geometry
- Grade
- 0.76
- Grade Unit
- %
- Intercept
- 9.2 m
- From
- 159 m
- To
- 168.2 m
Classification
- Sample Type
- drill
- Group ID
- incl:159-168.2
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-19T00:00:00.000Z
Reasoning: Expanded from assay table. 0.76 % zinc is below against the default band [18, 10, 5, 2] %. Grade×width 7.0 %·m is below.
Negative factors
- 0.76 % zinc is below the weak threshold (2 %) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.76”
Context: incl
and inclHaldane · silverGrade: 467Grade Unit: g/tIntercept: 1.2 mView all detailsHide details
Identity
- Hole ID
- and incl
- Project
- Haldane
- Commodity
- silver
- Ticker
- SNAG
Geometry
- Grade
- 467
- Grade Unit
- g/t
- Intercept
- 1.2 m
- From
- 165.8 m
- To
- 167 m
Classification
- Sample Type
- drill
- Group ID
- and incl:165.8-167
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-19T00:00:00.000Z
Reasoning: Expanded from assay table. 467 g/t silver is strong against the default band [500, 200, 100, 30] g/t. Grade×width 560.4 g/t·m is weak (grade alone is strong; the better of the two is used).
Positive factors
- 467 g/t silver is strong on the default band.
Negative factors
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“467”
Context: and incl
and inclHaldane · goldGrade: 0.21Grade Unit: g/tIntercept: 1.2 mView all detailsHide details
Identity
- Hole ID
- and incl
- Project
- Haldane
- Commodity
- gold
- Ticker
- SNAG
Geometry
- Grade
- 0.21
- Grade Unit
- g/t
- Intercept
- 1.2 m
- From
- 165.8 m
- To
- 167 m
Classification
- Sample Type
- drill
- Group ID
- and incl:165.8-167
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-19T00:00:00.000Z
Reasoning: Expanded from assay table. 0.21 g/t gold is below against the default band [5, 2, 1, 0.3] g/t. Grade×width 0.3 g/t·m is below.
Negative factors
- 0.21 g/t gold is below the weak threshold (0.3 g/t) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.21”
Context: and incl
and inclHaldane · leadGrade: 12.07Grade Unit: %Intercept: 1.2 mView all detailsHide details
Identity
- Hole ID
- and incl
- Project
- Haldane
- Commodity
- lead
- Ticker
- SNAG
Geometry
- Grade
- 12.07
- Grade Unit
- %
- Intercept
- 1.2 m
- From
- 165.8 m
- To
- 167 m
Classification
- Sample Type
- drill
- Group ID
- and incl:165.8-167
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-19T00:00:00.000Z
Reasoning: Expanded from assay table. 12.07 % lead is exceptional against the default band [10, 6, 3, 1] %. Grade×width 14.5 %·m is weak (grade alone is exceptional; the better of the two is used).
Positive factors
- 12.07 % lead is exceptional on the default band.
Negative factors
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“12.07”
Context: and incl
and inclHaldane · zincGrade: 1.34Grade Unit: %Intercept: 1.2 mView all detailsHide details
Identity
- Hole ID
- and incl
- Project
- Haldane
- Commodity
- zinc
- Ticker
- SNAG
Geometry
- Grade
- 1.34
- Grade Unit
- %
- Intercept
- 1.2 m
- From
- 165.8 m
- To
- 167 m
Classification
- Sample Type
- drill
- Group ID
- and incl:165.8-167
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-19T00:00:00.000Z
Reasoning: Expanded from assay table. 1.34 % zinc is below against the default band [18, 10, 5, 2] %. Grade×width 1.6 %·m is below.
Negative factors
- 1.34 % zinc is below the weak threshold (2 %) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“1.34”
Context: and incl
inclHaldane · silverGrade: 231Grade Unit: g/tIntercept: 14.4 mView all detailsHide details
Identity
- Hole ID
- incl
- Project
- Haldane
- Commodity
- silver
- Ticker
- SNAG
Geometry
- Grade
- 231
- Grade Unit
- g/t
- Intercept
- 14.4 m
- From
- 170.6 m
- To
- 185 m
Classification
- Sample Type
- drill
- Group ID
- incl:170.6-185
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-19T00:00:00.000Z
Reasoning: Expanded from assay table. 231 g/t silver is strong against the default band [500, 200, 100, 30] g/t. Grade×width 3326.4 g/t·m is strong.
Positive factors
- 231 g/t silver is strong on the default band.
Negative factors
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“231”
Context: incl
inclHaldane · goldGrade: 0.24Grade Unit: g/tIntercept: 14.4 mView all detailsHide details
Identity
- Hole ID
- incl
- Project
- Haldane
- Commodity
- gold
- Ticker
- SNAG
Geometry
- Grade
- 0.24
- Grade Unit
- g/t
- Intercept
- 14.4 m
- From
- 170.6 m
- To
- 185 m
Classification
- Sample Type
- drill
- Group ID
- incl:170.6-185
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-19T00:00:00.000Z
Reasoning: Expanded from assay table. 0.24 g/t gold is below against the default band [5, 2, 1, 0.3] g/t. Grade×width 3.5 g/t·m is below.
Negative factors
- 0.24 g/t gold is below the weak threshold (0.3 g/t) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.24”
Context: incl
inclHaldane · leadGrade: 0.54Grade Unit: %Intercept: 14.4 mView all detailsHide details
Identity
- Hole ID
- incl
- Project
- Haldane
- Commodity
- lead
- Ticker
- SNAG
Geometry
- Grade
- 0.54
- Grade Unit
- %
- Intercept
- 14.4 m
- From
- 170.6 m
- To
- 185 m
Classification
- Sample Type
- drill
- Group ID
- incl:170.6-185
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-19T00:00:00.000Z
Reasoning: Expanded from assay table. 0.54 % lead is below against the default band [10, 6, 3, 1] %. Grade×width 7.8 %·m is below.
Negative factors
- 0.54 % lead is below the weak threshold (1 %) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.54”
Context: incl
inclHaldane · zincGrade: 0.39Grade Unit: %Intercept: 14.4 mView all detailsHide details
Identity
- Hole ID
- incl
- Project
- Haldane
- Commodity
- zinc
- Ticker
- SNAG
Geometry
- Grade
- 0.39
- Grade Unit
- %
- Intercept
- 14.4 m
- From
- 170.6 m
- To
- 185 m
Classification
- Sample Type
- drill
- Group ID
- incl:170.6-185
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-19T00:00:00.000Z
Reasoning: Expanded from assay table. 0.39 % zinc is below against the default band [18, 10, 5, 2] %. Grade×width 5.6 %·m is below.
Negative factors
- 0.39 % zinc is below the weak threshold (2 %) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.39”
Context: incl
and inclHaldane · silverGrade: 425Grade Unit: g/tIntercept: 0.85 mView all detailsHide details
Identity
- Hole ID
- and incl
- Project
- Haldane
- Commodity
- silver
- Ticker
- SNAG
Geometry
- Grade
- 425
- Grade Unit
- g/t
- Intercept
- 0.85 m
- From
- 174.15 m
- To
- 175 m
Classification
- Sample Type
- drill
- Group ID
- and incl:174.15-175
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-19T00:00:00.000Z
Reasoning: Expanded from assay table. 425 g/t silver is strong against the default band [500, 200, 100, 30] g/t. Grade×width 361.3 g/t·m is weak (grade alone is strong; the better of the two is used).
Positive factors
- 425 g/t silver is strong on the default band.
Negative factors
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“425”
Context: and incl
and inclHaldane · goldGrade: 0.15Grade Unit: g/tIntercept: 0.85 mView all detailsHide details
Identity
- Hole ID
- and incl
- Project
- Haldane
- Commodity
- gold
- Ticker
- SNAG
Geometry
- Grade
- 0.15
- Grade Unit
- g/t
- Intercept
- 0.85 m
- From
- 174.15 m
- To
- 175 m
Classification
- Sample Type
- drill
- Group ID
- and incl:174.15-175
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-19T00:00:00.000Z
Reasoning: Expanded from assay table. 0.15 g/t gold is below against the default band [5, 2, 1, 0.3] g/t. Grade×width 0.1 g/t·m is below.
Negative factors
- 0.15 g/t gold is below the weak threshold (0.3 g/t) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.15”
Context: and incl
and inclHaldane · leadGrade: 2.24Grade Unit: %Intercept: 0.85 mView all detailsHide details
Identity
- Hole ID
- and incl
- Project
- Haldane
- Commodity
- lead
- Ticker
- SNAG
Geometry
- Grade
- 2.24
- Grade Unit
- %
- Intercept
- 0.85 m
- From
- 174.15 m
- To
- 175 m
Classification
- Sample Type
- drill
- Group ID
- and incl:174.15-175
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-19T00:00:00.000Z
Reasoning: Expanded from assay table. 2.24 % lead is weak against the default band [10, 6, 3, 1] %. Grade×width 1.9 %·m is below (grade alone is weak; the better of the two is used).
Negative factors
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“2.24”
Context: and incl
and inclHaldane · zincGrade: 0.55Grade Unit: %Intercept: 0.85 mView all detailsHide details
Identity
- Hole ID
- and incl
- Project
- Haldane
- Commodity
- zinc
- Ticker
- SNAG
Geometry
- Grade
- 0.55
- Grade Unit
- %
- Intercept
- 0.85 m
- From
- 174.15 m
- To
- 175 m
Classification
- Sample Type
- drill
- Group ID
- and incl:174.15-175
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-19T00:00:00.000Z
Reasoning: Expanded from assay table. 0.55 % zinc is below against the default band [18, 10, 5, 2] %. Grade×width 0.5 %·m is below.
Negative factors
- 0.55 % zinc is below the weak threshold (2 %) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.55”
Context: and incl
and inclHaldane · silverGrade: 1261Grade Unit: g/tIntercept: 1.25 mView all detailsHide details
Identity
- Hole ID
- and incl
- Project
- Haldane
- Commodity
- silver
- Ticker
- SNAG
Geometry
- Grade
- 1261
- Grade Unit
- g/t
- Intercept
- 1.25 m
- From
- 179.5 m
- To
- 180.75 m
Classification
- Sample Type
- drill
- Group ID
- and incl:179.5-180.75
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-19T00:00:00.000Z
Reasoning: Expanded from assay table. 1261 g/t silver is exceptional against the default band [500, 200, 100, 30] g/t. Grade×width 1576.3 g/t·m is moderate (grade alone is exceptional; the better of the two is used).
Positive factors
- 1261 g/t silver is exceptional on the default band.
Negative factors
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“1261”
Context: and incl
and inclHaldane · goldGrade: 0.74Grade Unit: g/tIntercept: 1.25 mView all detailsHide details
Identity
- Hole ID
- and incl
- Project
- Haldane
- Commodity
- gold
- Ticker
- SNAG
Geometry
- Grade
- 0.74
- Grade Unit
- g/t
- Intercept
- 1.25 m
- From
- 179.5 m
- To
- 180.75 m
Classification
- Sample Type
- drill
- Group ID
- and incl:179.5-180.75
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-19T00:00:00.000Z
Reasoning: Expanded from assay table. 0.74 g/t gold is weak against the default band [5, 2, 1, 0.3] g/t. Grade×width 0.9 g/t·m is below (grade alone is weak; the better of the two is used).
Negative factors
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.74”
Context: and incl
and inclHaldane · leadGrade: 0.35Grade Unit: %Intercept: 1.25 mView all detailsHide details
Identity
- Hole ID
- and incl
- Project
- Haldane
- Commodity
- lead
- Ticker
- SNAG
Geometry
- Grade
- 0.35
- Grade Unit
- %
- Intercept
- 1.25 m
- From
- 179.5 m
- To
- 180.75 m
Classification
- Sample Type
- drill
- Group ID
- and incl:179.5-180.75
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-19T00:00:00.000Z
Reasoning: Expanded from assay table. 0.35 % lead is below against the default band [10, 6, 3, 1] %. Grade×width 0.4 %·m is below.
Negative factors
- 0.35 % lead is below the weak threshold (1 %) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.35”
Context: and incl
and inclHaldane · zincGrade: 0.41Grade Unit: %Intercept: 1.25 mView all detailsHide details
Identity
- Hole ID
- and incl
- Project
- Haldane
- Commodity
- zinc
- Ticker
- SNAG
Geometry
- Grade
- 0.41
- Grade Unit
- %
- Intercept
- 1.25 m
- From
- 179.5 m
- To
- 180.75 m
Classification
- Sample Type
- drill
- Group ID
- and incl:179.5-180.75
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-19T00:00:00.000Z
Reasoning: Expanded from assay table. 0.41 % zinc is below against the default band [18, 10, 5, 2] %. Grade×width 0.5 %·m is below.
Negative factors
- 0.41 % zinc is below the weak threshold (2 %) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.41”
Context: and incl
inclHaldane · silverGrade: 55Grade Unit: g/tIntercept: 6.35 mView all detailsHide details
Identity
- Hole ID
- incl
- Project
- Haldane
- Commodity
- silver
- Ticker
- SNAG
Geometry
- Grade
- 55
- Grade Unit
- g/t
- Intercept
- 6.35 m
- From
- 189.8 m
- To
- 196.15 m
Classification
- Sample Type
- drill
- Group ID
- incl:189.8-196.15
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-19T00:00:00.000Z
Reasoning: Expanded from assay table. 55 g/t silver is weak against the default band [500, 200, 100, 30] g/t. Grade×width 349.3 g/t·m is weak.
Negative factors
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“55”
Context: incl
inclHaldane · goldGrade: 0.08Grade Unit: g/tIntercept: 6.35 mView all detailsHide details
Identity
- Hole ID
- incl
- Project
- Haldane
- Commodity
- gold
- Ticker
- SNAG
Geometry
- Grade
- 0.08
- Grade Unit
- g/t
- Intercept
- 6.35 m
- From
- 189.8 m
- To
- 196.15 m
Classification
- Sample Type
- drill
- Group ID
- incl:189.8-196.15
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-19T00:00:00.000Z
Reasoning: Expanded from assay table. 0.08 g/t gold is below against the default band [5, 2, 1, 0.3] g/t. Grade×width 0.5 g/t·m is below.
Negative factors
- 0.08 g/t gold is below the weak threshold (0.3 g/t) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.08”
Context: incl
inclHaldane · leadGrade: 0.27Grade Unit: %Intercept: 6.35 mView all detailsHide details
Identity
- Hole ID
- incl
- Project
- Haldane
- Commodity
- lead
- Ticker
- SNAG
Geometry
- Grade
- 0.27
- Grade Unit
- %
- Intercept
- 6.35 m
- From
- 189.8 m
- To
- 196.15 m
Classification
- Sample Type
- drill
- Group ID
- incl:189.8-196.15
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-19T00:00:00.000Z
Reasoning: Expanded from assay table. 0.27 % lead is below against the default band [10, 6, 3, 1] %. Grade×width 1.7 %·m is below.
Negative factors
- 0.27 % lead is below the weak threshold (1 %) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.27”
Context: incl
inclHaldane · zincGrade: 0.8Grade Unit: %Intercept: 6.35 mView all detailsHide details
Identity
- Hole ID
- incl
- Project
- Haldane
- Commodity
- zinc
- Ticker
- SNAG
Geometry
- Grade
- 0.8
- Grade Unit
- %
- Intercept
- 6.35 m
- From
- 189.8 m
- To
- 196.15 m
Classification
- Sample Type
- drill
- Group ID
- incl:189.8-196.15
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-19T00:00:00.000Z
Reasoning: Expanded from assay table. 0.8 % zinc is below against the default band [18, 10, 5, 2] %. Grade×width 5.1 %·m is below.
Negative factors
- 0.8 % zinc is below the weak threshold (2 %) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.80”
Context: incl
and inclHaldane · silverGrade: 642Grade Unit: g/tIntercept: 0.8 mView all detailsHide details
Identity
- Hole ID
- and incl
- Project
- Haldane
- Commodity
- silver
- Ticker
- SNAG
Geometry
- Grade
- 642
- Grade Unit
- g/t
- Intercept
- 0.8 m
- From
- 191.4 m
- To
- 192.2 m
Classification
- Sample Type
- drill
- Group ID
- and incl:191.4-192.2
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-19T00:00:00.000Z
Reasoning: Expanded from assay table. 642 g/t silver is exceptional against the default band [500, 200, 100, 30] g/t. Grade×width 513.6 g/t·m is weak (grade alone is exceptional; the better of the two is used).
Positive factors
- 642 g/t silver is exceptional on the default band.
Negative factors
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“642”
Context: and incl
and inclHaldane · goldGrade: 0.3Grade Unit: g/tIntercept: 0.8 mView all detailsHide details
Identity
- Hole ID
- and incl
- Project
- Haldane
- Commodity
- gold
- Ticker
- SNAG
Geometry
- Grade
- 0.3
- Grade Unit
- g/t
- Intercept
- 0.8 m
- From
- 191.4 m
- To
- 192.2 m
Classification
- Sample Type
- drill
- Group ID
- and incl:191.4-192.2
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-19T00:00:00.000Z
Reasoning: Expanded from assay table. 0.3 g/t gold is weak against the default band [5, 2, 1, 0.3] g/t. Grade×width 0.2 g/t·m is below (grade alone is weak; the better of the two is used).
Negative factors
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.30”
Context: and incl
and inclHaldane · leadGrade: 3.38Grade Unit: %Intercept: 0.8 mView all detailsHide details
Identity
- Hole ID
- and incl
- Project
- Haldane
- Commodity
- lead
- Ticker
- SNAG
Geometry
- Grade
- 3.38
- Grade Unit
- %
- Intercept
- 0.8 m
- From
- 191.4 m
- To
- 192.2 m
Classification
- Sample Type
- drill
- Group ID
- and incl:191.4-192.2
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-19T00:00:00.000Z
Reasoning: Expanded from assay table. 3.38 % lead is moderate against the default band [10, 6, 3, 1] %. Grade×width 2.7 %·m is below (grade alone is moderate; the better of the two is used).
Negative factors
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“3.38”
Context: and incl
and inclHaldane · zincGrade: 4.57Grade Unit: %Intercept: 0.8 mView all detailsHide details
Identity
- Hole ID
- and incl
- Project
- Haldane
- Commodity
- zinc
- Ticker
- SNAG
Geometry
- Grade
- 4.57
- Grade Unit
- %
- Intercept
- 0.8 m
- From
- 191.4 m
- To
- 192.2 m
Classification
- Sample Type
- drill
- Group ID
- and incl:191.4-192.2
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-19T00:00:00.000Z
Reasoning: Expanded from assay table. 4.57 % zinc is weak against the default band [18, 10, 5, 2] %. Grade×width 3.7 %·m is below (grade alone is weak; the better of the two is used).
Negative factors
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“4.57”
Context: and incl
inclHaldane · silverGrade: 1069Grade Unit: g/tIntercept: 2.8 mView all detailsHide details
Identity
- Hole ID
- incl
- Project
- Haldane
- Commodity
- silver
- Ticker
- SNAG
Geometry
- Grade
- 1069
- Grade Unit
- g/t
- Intercept
- 2.8 m
- From
- 188 m
- To
- 190.8 m
Classification
- Sample Type
- drill
- Group ID
- incl:188-190.8
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-19T00:00:00.000Z
Reasoning: Expanded from assay table. 1069 g/t silver is exceptional against the default band [500, 200, 100, 30] g/t. Grade×width 2993.2 g/t·m is moderate (grade alone is exceptional; the better of the two is used).
Positive factors
- 1069 g/t silver is exceptional on the default band.
Negative factors
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“1069”
Context: incl
inclHaldane · goldGrade: 1.41Grade Unit: g/tIntercept: 2.8 mView all detailsHide details
Identity
- Hole ID
- incl
- Project
- Haldane
- Commodity
- gold
- Ticker
- SNAG
Geometry
- Grade
- 1.41
- Grade Unit
- g/t
- Intercept
- 2.8 m
- From
- 188 m
- To
- 190.8 m
Classification
- Sample Type
- drill
- Group ID
- incl:188-190.8
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-19T00:00:00.000Z
Reasoning: Expanded from assay table. 1.41 g/t gold is moderate against the default band [5, 2, 1, 0.3] g/t. Grade×width 3.9 g/t·m is below (grade alone is moderate; the better of the two is used).
Negative factors
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“1.41”
Context: incl
inclHaldane · leadGrade: 12.6Grade Unit: %Intercept: 2.8 mView all detailsHide details
Identity
- Hole ID
- incl
- Project
- Haldane
- Commodity
- lead
- Ticker
- SNAG
Geometry
- Grade
- 12.6
- Grade Unit
- %
- Intercept
- 2.8 m
- From
- 188 m
- To
- 190.8 m
Classification
- Sample Type
- drill
- Group ID
- incl:188-190.8
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-19T00:00:00.000Z
Reasoning: Expanded from assay table. 12.6 % lead is exceptional against the default band [10, 6, 3, 1] %. Grade×width 35.3 %·m is moderate (grade alone is exceptional; the better of the two is used).
Positive factors
- 12.6 % lead is exceptional on the default band.
Negative factors
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“12.60”
Context: incl
inclHaldane · zincGrade: 3.02Grade Unit: %Intercept: 2.8 mView all detailsHide details
Identity
- Hole ID
- incl
- Project
- Haldane
- Commodity
- zinc
- Ticker
- SNAG
Geometry
- Grade
- 3.02
- Grade Unit
- %
- Intercept
- 2.8 m
- From
- 188 m
- To
- 190.8 m
Classification
- Sample Type
- drill
- Group ID
- incl:188-190.8
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-19T00:00:00.000Z
Reasoning: Expanded from assay table. 3.02 % zinc is weak against the default band [18, 10, 5, 2] %. Grade×width 8.5 %·m is below (grade alone is weak; the better of the two is used).
Negative factors
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“3.02”
Context: incl
inclHaldane · silverGrade: 140Grade Unit: g/tIntercept: 9.5 mView all detailsHide details
Identity
- Hole ID
- incl
- Project
- Haldane
- Commodity
- silver
- Ticker
- SNAG
Geometry
- Grade
- 140
- Grade Unit
- g/t
- Intercept
- 9.5 m
- From
- 198 m
- To
- 207.5 m
Classification
- Sample Type
- drill
- Group ID
- incl:198-207.5
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-19T00:00:00.000Z
Reasoning: Expanded from assay table. 140 g/t silver is moderate against the default band [500, 200, 100, 30] g/t. Grade×width 1330.0 g/t·m is moderate.
Negative factors
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“140”
Context: incl
inclHaldane · goldGrade: 0.29Grade Unit: g/tIntercept: 9.5 mView all detailsHide details
Identity
- Hole ID
- incl
- Project
- Haldane
- Commodity
- gold
- Ticker
- SNAG
Geometry
- Grade
- 0.29
- Grade Unit
- g/t
- Intercept
- 9.5 m
- From
- 198 m
- To
- 207.5 m
Classification
- Sample Type
- drill
- Group ID
- incl:198-207.5
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-19T00:00:00.000Z
Reasoning: Expanded from assay table. 0.29 g/t gold is below against the default band [5, 2, 1, 0.3] g/t. Grade×width 2.8 g/t·m is below.
Negative factors
- 0.29 g/t gold is below the weak threshold (0.3 g/t) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.29”
Context: incl
inclHaldane · leadGrade: 3.44Grade Unit: %Intercept: 9.5 mView all detailsHide details
Identity
- Hole ID
- incl
- Project
- Haldane
- Commodity
- lead
- Ticker
- SNAG
Geometry
- Grade
- 3.44
- Grade Unit
- %
- Intercept
- 9.5 m
- From
- 198 m
- To
- 207.5 m
Classification
- Sample Type
- drill
- Group ID
- incl:198-207.5
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-19T00:00:00.000Z
Reasoning: Expanded from assay table. 3.44 % lead is moderate against the default band [10, 6, 3, 1] %. Grade×width 32.7 %·m is moderate.
Negative factors
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“3.44”
Context: incl
inclHaldane · zincGrade: 1.34Grade Unit: %Intercept: 9.5 mView all detailsHide details
Identity
- Hole ID
- incl
- Project
- Haldane
- Commodity
- zinc
- Ticker
- SNAG
Geometry
- Grade
- 1.34
- Grade Unit
- %
- Intercept
- 9.5 m
- From
- 198 m
- To
- 207.5 m
Classification
- Sample Type
- drill
- Group ID
- incl:198-207.5
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-19T00:00:00.000Z
Reasoning: Expanded from assay table. 1.34 % zinc is below against the default band [18, 10, 5, 2] %. Grade×width 12.7 %·m is below.
Negative factors
- 1.34 % zinc is below the weak threshold (2 %) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“1.34”
Context: incl
and inclHaldane · silverGrade: 437Grade Unit: g/tIntercept: 1.9 mView all detailsHide details
Identity
- Hole ID
- and incl
- Project
- Haldane
- Commodity
- silver
- Ticker
- SNAG
Geometry
- Grade
- 437
- Grade Unit
- g/t
- Intercept
- 1.9 m
- From
- 203.6 m
- To
- 205.5 m
Classification
- Sample Type
- drill
- Group ID
- and incl:203.6-205.5
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-19T00:00:00.000Z
Reasoning: Expanded from assay table. 437 g/t silver is strong against the default band [500, 200, 100, 30] g/t. Grade×width 830.3 g/t·m is weak (grade alone is strong; the better of the two is used).
Positive factors
- 437 g/t silver is strong on the default band.
Negative factors
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“437”
Context: and incl
and inclHaldane · goldGrade: 0.35Grade Unit: g/tIntercept: 1.9 mView all detailsHide details
Identity
- Hole ID
- and incl
- Project
- Haldane
- Commodity
- gold
- Ticker
- SNAG
Geometry
- Grade
- 0.35
- Grade Unit
- g/t
- Intercept
- 1.9 m
- From
- 203.6 m
- To
- 205.5 m
Classification
- Sample Type
- drill
- Group ID
- and incl:203.6-205.5
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-19T00:00:00.000Z
Reasoning: Expanded from assay table. 0.35 g/t gold is weak against the default band [5, 2, 1, 0.3] g/t. Grade×width 0.7 g/t·m is below (grade alone is weak; the better of the two is used).
Negative factors
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.35”
Context: and incl
and inclHaldane · leadGrade: 14.55Grade Unit: %Intercept: 1.9 mView all detailsHide details
Identity
- Hole ID
- and incl
- Project
- Haldane
- Commodity
- lead
- Ticker
- SNAG
Geometry
- Grade
- 14.55
- Grade Unit
- %
- Intercept
- 1.9 m
- From
- 203.6 m
- To
- 205.5 m
Classification
- Sample Type
- drill
- Group ID
- and incl:203.6-205.5
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-19T00:00:00.000Z
Reasoning: Expanded from assay table. 14.55 % lead is exceptional against the default band [10, 6, 3, 1] %. Grade×width 27.6 %·m is weak (grade alone is exceptional; the better of the two is used).
Positive factors
- 14.55 % lead is exceptional on the default band.
Negative factors
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“14.55”
Context: and incl
and inclHaldane · zincGrade: 4.04Grade Unit: %Intercept: 1.9 mView all detailsHide details
Identity
- Hole ID
- and incl
- Project
- Haldane
- Commodity
- zinc
- Ticker
- SNAG
Geometry
- Grade
- 4.04
- Grade Unit
- %
- Intercept
- 1.9 m
- From
- 203.6 m
- To
- 205.5 m
Classification
- Sample Type
- drill
- Group ID
- and incl:203.6-205.5
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-19T00:00:00.000Z
Reasoning: Expanded from assay table. 4.04 % zinc is weak against the default band [18, 10, 5, 2] %. Grade×width 7.7 %·m is below (grade alone is weak; the better of the two is used).
Negative factors
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“4.04”
Context: and incl
How Atlas produces this analysis
Minestarters Atlas uses automated extraction to summarize mining announcements, identify reported measurements, and classify supporting evidence. Sentiment reflects the extracted narrative and classification rules; it is an interpretation, not a reported measurement. Evidence quotes and context are provided where available. Missing data, low-confidence results, and review flags indicate limitations. Check the original publisher announcement before relying on an interpretation.