SAGA Metals Drills 495.6 m at 37.86% Fe2O3, 5.51% TiO2, 0.273% V2O5 Including 68.2 m at 52.95% Fe2O3, 8.57% TiO2, 0.381% V2O5 at Radar Critical Minerals Project in Labrador
Original announcement by orestocks on
- Company
- SAGA Metals Corp.
- Ticker
- SAGA.V
- Exchange
- Unavailable
- Region
- Labrador, Canada
- Primary commodity
- Iron ore
- Secondary commodities
- Titanium, Vanadium
- Document categories
- Drill results
- Extracted
- 2026-10-07 12:49:41 UTC
Analysis by Minestarters Atlas
Atlas analysis published:
Minestarters Atlas analysis
Summary
SAGA Metals Corp. reported additional assay results from six diamond drill holes (R-0082 to R-0087) at its Radar Critical Minerals Project in Labrador, Canada, as part of its maiden Mineral Resource Estimate drill program. Key intercepts include 495.6 meters at 37.86% Fe2O3, 5.51% TiO2, and 0.273% V2O5 in hole R-0085, with a high-grade section of 68.2 meters at 52.95% Fe2O3, 8.57% TiO2, and 0.381% V2O5. These broad and consistent intercepts of oxide mineralization are expected to support the upcoming maiden MRE for the Trapper Zone.
Reasoning: The drill program delivered exceptionally wide and consistent polymetallic intercepts of iron, titanium, and vanadium mineralization, including high-grade zones, which are crucial for establishing a large-scale resource in the upcoming maiden MRE, despite the iron grades being in the lower tier.
Positive factors
- Exceptional intercept widths (e.g., 495.6 m)
- High-grade sub-intervals for all three commodities (Fe, Ti, V)
- Consistent polymetallic mineralization across multiple holes
- Program designed for maiden Mineral Resource Estimate
- Strong grade-thickness products for all commodities
- QA/QC procedures disclosed
Negative factors
- Iron grades are generally in the 'weak' category when converted to Fe%
- True width for specific reported intercepts not provided
Low confidence — this extraction should be reviewed alongside the original source.
Facts used in scoring: 33
Classification and evidence
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: The release states that certified reference standards, blanks, and duplicate samples were inserted into the sample stream at regular intervals and that Dr. A. Miller, P. Geo., QP, reviewed and approved the technical information.
Evidence · text
“As part of the analytical quality assurance and quality control (QA/QC) program, certified reference standards, blanks, and duplicate samples were inserted into the sample stream at regular intervals to monitor analytical accuracy and precision. ... Dr. A. Miller, P. Geo., PEGNL, is an Independent Qualified Person as defined under National Instrument 43-101 and has reviewed and approved the technical information disclosed in this news release.”
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: The drill program is explicitly stated as part of its maiden Mineral Resource Estimate ('MRE') diamond drill program, indicating its purpose is to define and delineate the resource.
Evidence · text
“additional assay results from drill holes R-0082, -0083, -0084, -0085, -0086, and -0087 drilled as part of its maiden Mineral Resource Estimate ('MRE') diamond drill program”
Apparent Width Onlynegative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Why it applies: The reported intercepts are given as downhole lengths, and while true thicknesses are provided for broader oxide zones, specific true widths for the reported assay intervals are not stated.
Evidence · text
“Hole R-0085: 495.6 m @ 37.86% Fe2O3 ... The oxide zone intersected at 10.1 m is 408.5 m wide (true thickness 284.2 m)”
Extracted facts
Stored fact records: 33. Some facts used in scoring do not have a stored record.
Drill Results (33)
R-0082Radar Critical Minerals · iron_oreGrade: 36.12Grade Unit: %Intercept: 51.8 mView all detailsHide details
Identity
- Hole ID
- R-0082
- Project
- Radar Critical Minerals
- Commodity
- iron_ore
- Region
- labrador
- Reported Region
- labrador
- Ticker
- SAGA.V
Geometry
- Grade
- 36.12
- Grade Unit
- %
- Intercept
- 51.8 m
- Hole Depth
- 269 m
Classification
- Deposit Type
- other
- Program
- resource
- Sample Type
- drill
- Mining Method
- open_pit
Location
- Azimuth
- 0 °
- Dip
- -45 °
QA/QC
- Laboratory
- Impact Global Solutions (IGS)
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-10-07T00:00:00.000Z
Reasoning: This intercept shows good width and consistent polymetallic mineralization, contributing to the MRE, though the iron grade is moderate.
Positive factors
- Significant intercept width
- Consistent polymetallic mineralization
- Part of MRE drill program
Negative factors
- Iron grade is in the 'weak' category
- True width not provided for this intercept
Evidence · text
“Hole R-0082: 51.8 m @ 36.12% Fe2O3, 6.18% TiO2, 0.190% V2O5”
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
R-0082Radar Critical Minerals · titaniumGrade: 6.18Grade Unit: %Intercept: 51.8 mView all detailsHide details
Identity
- Hole ID
- R-0082
- Project
- Radar Critical Minerals
- Commodity
- titanium
- Region
- labrador
- Reported Region
- labrador
- Ticker
- SAGA.V
Geometry
- Grade
- 6.18
- Grade Unit
- %
- Intercept
- 51.8 m
- Hole Depth
- 269 m
Classification
- Deposit Type
- other
- Program
- resource
- Sample Type
- drill
- Mining Method
- open_pit
Location
- Azimuth
- 0 °
- Dip
- -45 °
QA/QC
- Laboratory
- Impact Global Solutions (IGS)
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-10-07T00:00:00.000Z
Reasoning: This intercept shows good width and consistent polymetallic mineralization, contributing to the MRE, with a moderate titanium grade.
Positive factors
- Significant intercept width
- Consistent polymetallic mineralization
- Part of MRE drill program
Negative factors
- True width not provided for this intercept
Evidence · text
“Hole R-0082: 51.8 m @ 36.12% Fe2O3, 6.18% TiO2, 0.190% V2O5”
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
R-0082Radar Critical Minerals · vanadiumGrade: 0.19Grade Unit: %Intercept: 51.8 mView all detailsHide details
Identity
- Hole ID
- R-0082
- Project
- Radar Critical Minerals
- Commodity
- vanadium
- Region
- labrador
- Reported Region
- labrador
- Ticker
- SAGA.V
Geometry
- Grade
- 0.19
- Grade Unit
- %
- Intercept
- 51.8 m
- Hole Depth
- 269 m
Classification
- Deposit Type
- other
- Program
- resource
- Sample Type
- drill
- Mining Method
- open_pit
Location
- Azimuth
- 0 °
- Dip
- -45 °
QA/QC
- Laboratory
- Impact Global Solutions (IGS)
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-10-07T00:00:00.000Z
Reasoning: This intercept shows good width and consistent polymetallic mineralization, contributing to the MRE, with a moderate vanadium grade.
Positive factors
- Significant intercept width
- Consistent polymetallic mineralization
- Part of MRE drill program
Negative factors
- True width not provided for this intercept
Evidence · text
“Hole R-0082: 51.8 m @ 36.12% Fe2O3, 6.18% TiO2, 0.190% V2O5”
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
R-0083Radar Critical Minerals · iron_oreGrade: 41.89Grade Unit: %Intercept: 25.8 mView all detailsHide details
Identity
- Hole ID
- R-0083
- Project
- Radar Critical Minerals
- Commodity
- iron_ore
- Region
- labrador
- Reported Region
- labrador
- Ticker
- SAGA.V
Geometry
- Grade
- 41.89
- Grade Unit
- %
- Intercept
- 25.8 m
- Hole Depth
- 263 m
Classification
- Deposit Type
- other
- Program
- resource
- Sample Type
- drill
- Mining Method
- open_pit
Location
- Azimuth
- 218 °
- Dip
- -45 °
QA/QC
- Laboratory
- Impact Global Solutions (IGS)
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-10-07T00:00:00.000Z
Reasoning: This intercept shows good iron grade and consistent polymetallic mineralization, contributing to the MRE.
Positive factors
- Good iron grade
- Consistent polymetallic mineralization
- Part of MRE drill program
Negative factors
- True width not provided for this intercept
Evidence · text
“Hole R-0083: 25.8 m @ 41.89% Fe2O3, 7.27% TiO2, 0.295% V2O5”
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
R-0083Radar Critical Minerals · titaniumGrade: 7.27Grade Unit: %Intercept: 25.8 mView all detailsHide details
Identity
- Hole ID
- R-0083
- Project
- Radar Critical Minerals
- Commodity
- titanium
- Region
- labrador
- Reported Region
- labrador
- Ticker
- SAGA.V
Geometry
- Grade
- 7.27
- Grade Unit
- %
- Intercept
- 25.8 m
- Hole Depth
- 263 m
Classification
- Deposit Type
- other
- Program
- resource
- Sample Type
- drill
- Mining Method
- open_pit
Location
- Azimuth
- 218 °
- Dip
- -45 °
QA/QC
- Laboratory
- Impact Global Solutions (IGS)
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-10-07T00:00:00.000Z
Reasoning: This intercept shows good titanium grade and consistent polymetallic mineralization, contributing to the MRE.
Positive factors
- Good titanium grade
- Consistent polymetallic mineralization
- Part of MRE drill program
Negative factors
- True width not provided for this intercept
Evidence · text
“Hole R-0083: 25.8 m @ 41.89% Fe2O3, 7.27% TiO2, 0.295% V2O5”
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
R-0083Radar Critical Minerals · vanadiumGrade: 0.295Grade Unit: %Intercept: 25.8 mView all detailsHide details
Identity
- Hole ID
- R-0083
- Project
- Radar Critical Minerals
- Commodity
- vanadium
- Region
- labrador
- Reported Region
- labrador
- Ticker
- SAGA.V
Geometry
- Grade
- 0.295
- Grade Unit
- %
- Intercept
- 25.8 m
- Hole Depth
- 263 m
Classification
- Deposit Type
- other
- Program
- resource
- Sample Type
- drill
- Mining Method
- open_pit
Location
- Azimuth
- 218 °
- Dip
- -45 °
QA/QC
- Laboratory
- Impact Global Solutions (IGS)
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-10-07T00:00:00.000Z
Reasoning: This intercept shows good vanadium grade and consistent polymetallic mineralization, contributing to the MRE.
Positive factors
- Good vanadium grade
- Consistent polymetallic mineralization
- Part of MRE drill program
Negative factors
- True width not provided for this intercept
Evidence · text
“Hole R-0083: 25.8 m @ 41.89% Fe2O3, 7.27% TiO2, 0.295% V2O5”
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
R-0084Radar Critical Minerals · iron_oreGrade: 36.58Grade Unit: %Intercept: 80.9 mView all detailsHide details
Identity
- Hole ID
- R-0084
- Project
- Radar Critical Minerals
- Commodity
- iron_ore
- Region
- labrador
- Reported Region
- labrador
- Ticker
- SAGA.V
Geometry
- Grade
- 36.58
- Grade Unit
- %
- Intercept
- 80.9 m
- Hole Depth
- 164 m
Classification
- Deposit Type
- other
- Program
- resource
- Sample Type
- drill
- Mining Method
- open_pit
Location
- Azimuth
- 38 °
- Dip
- -55 °
QA/QC
- Laboratory
- Impact Global Solutions (IGS)
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-10-07T00:00:00.000Z
Reasoning: This intercept shows significant width and consistent polymetallic mineralization, contributing to the MRE, though the iron grade is moderate.
Positive factors
- Significant intercept width
- Consistent polymetallic mineralization
- Part of MRE drill program
Negative factors
- Iron grade is in the 'weak' category
- True width not provided for this intercept
Evidence · text
“Hole R-0084: 80.9 m @ 36.58% Fe2O3, 6.07% TiO2, 0.201% V2O5”
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
R-0084Radar Critical Minerals · titaniumGrade: 6.07Grade Unit: %Intercept: 80.9 mView all detailsHide details
Identity
- Hole ID
- R-0084
- Project
- Radar Critical Minerals
- Commodity
- titanium
- Region
- labrador
- Reported Region
- labrador
- Ticker
- SAGA.V
Geometry
- Grade
- 6.07
- Grade Unit
- %
- Intercept
- 80.9 m
- Hole Depth
- 164 m
Classification
- Deposit Type
- other
- Program
- resource
- Sample Type
- drill
- Mining Method
- open_pit
Location
- Azimuth
- 38 °
- Dip
- -55 °
QA/QC
- Laboratory
- Impact Global Solutions (IGS)
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-10-07T00:00:00.000Z
Reasoning: This intercept shows significant width and consistent polymetallic mineralization, contributing to the MRE, with a moderate titanium grade.
Positive factors
- Significant intercept width
- Consistent polymetallic mineralization
- Part of MRE drill program
Negative factors
- True width not provided for this intercept
Evidence · text
“Hole R-0084: 80.9 m @ 36.58% Fe2O3, 6.07% TiO2, 0.201% V2O5”
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
R-0084Radar Critical Minerals · vanadiumGrade: 0.201Grade Unit: %Intercept: 80.9 mView all detailsHide details
Identity
- Hole ID
- R-0084
- Project
- Radar Critical Minerals
- Commodity
- vanadium
- Region
- labrador
- Reported Region
- labrador
- Ticker
- SAGA.V
Geometry
- Grade
- 0.201
- Grade Unit
- %
- Intercept
- 80.9 m
- Hole Depth
- 164 m
Classification
- Deposit Type
- other
- Program
- resource
- Sample Type
- drill
- Mining Method
- open_pit
Location
- Azimuth
- 38 °
- Dip
- -55 °
QA/QC
- Laboratory
- Impact Global Solutions (IGS)
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-10-07T00:00:00.000Z
Reasoning: This intercept shows significant width and consistent polymetallic mineralization, contributing to the MRE, with a moderate vanadium grade.
Positive factors
- Significant intercept width
- Consistent polymetallic mineralization
- Part of MRE drill program
Negative factors
- True width not provided for this intercept
Evidence · text
“Hole R-0084: 80.9 m @ 36.58% Fe2O3, 6.07% TiO2, 0.201% V2O5”
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
R-0085Radar Critical Minerals · iron_oreGrade: 37.86Grade Unit: %Intercept: 495.6 mView all detailsHide details
Identity
- Hole ID
- R-0085
- Project
- Radar Critical Minerals
- Commodity
- iron_ore
- Region
- labrador
- Reported Region
- labrador
- Ticker
- SAGA.V
Geometry
- Grade
- 37.86
- Grade Unit
- %
- Intercept
- 495.6 m
- Hole Depth
- 503 m
Classification
- Deposit Type
- other
- Program
- resource
- Sample Type
- drill
- Mining Method
- open_pit
Location
- Azimuth
- 218 °
- Dip
- -55 °
QA/QC
- Laboratory
- Impact Global Solutions (IGS)
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-10-07T00:00:00.000Z
Reasoning: This intercept is exceptionally wide with consistent polymetallic mineralization, yielding an outstanding grade-thickness product, highly material for the MRE despite the moderate iron grade.
Positive factors
- Exceptional intercept width
- Consistent polymetallic mineralization
- Part of MRE drill program
- Exceptional grade-thickness product
Negative factors
- Iron grade is in the 'weak' category
- True width not provided for this intercept
Evidence · text
“Hole R-0085: 495.6 m @ 37.86% Fe2O3, 5.51% TiO2, 0.273% V2O5”
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
R-0085Radar Critical Minerals · titaniumGrade: 5.51Grade Unit: %Intercept: 495.6 mView all detailsHide details
Identity
- Hole ID
- R-0085
- Project
- Radar Critical Minerals
- Commodity
- titanium
- Region
- labrador
- Reported Region
- labrador
- Ticker
- SAGA.V
Geometry
- Grade
- 5.51
- Grade Unit
- %
- Intercept
- 495.6 m
- Hole Depth
- 503 m
Classification
- Deposit Type
- other
- Program
- resource
- Sample Type
- drill
- Mining Method
- open_pit
Location
- Azimuth
- 218 °
- Dip
- -55 °
QA/QC
- Laboratory
- Impact Global Solutions (IGS)
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-10-07T00:00:00.000Z
Reasoning: This intercept is exceptionally wide with consistent polymetallic mineralization, yielding an outstanding grade-thickness product, highly material for the MRE.
Positive factors
- Exceptional intercept width
- Consistent polymetallic mineralization
- Part of MRE drill program
- Exceptional grade-thickness product
Negative factors
- True width not provided for this intercept
Evidence · text
“Hole R-0085: 495.6 m @ 37.86% Fe2O3, 5.51% TiO2, 0.273% V2O5”
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
R-0085Radar Critical Minerals · vanadiumGrade: 0.273Grade Unit: %Intercept: 495.6 mView all detailsHide details
Identity
- Hole ID
- R-0085
- Project
- Radar Critical Minerals
- Commodity
- vanadium
- Region
- labrador
- Reported Region
- labrador
- Ticker
- SAGA.V
Geometry
- Grade
- 0.273
- Grade Unit
- %
- Intercept
- 495.6 m
- Hole Depth
- 503 m
Classification
- Deposit Type
- other
- Program
- resource
- Sample Type
- drill
- Mining Method
- open_pit
Location
- Azimuth
- 218 °
- Dip
- -55 °
QA/QC
- Laboratory
- Impact Global Solutions (IGS)
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-10-07T00:00:00.000Z
Reasoning: This intercept is exceptionally wide with consistent polymetallic mineralization, yielding an outstanding grade-thickness product, highly material for the MRE.
Positive factors
- Exceptional intercept width
- Consistent polymetallic mineralization
- Part of MRE drill program
- Exceptional grade-thickness product
Negative factors
- True width not provided for this intercept
Evidence · text
“Hole R-0085: 495.6 m @ 37.86% Fe2O3, 5.51% TiO2, 0.273% V2O5”
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
R-0085Radar Critical Minerals · iron_oreGrade: 52.75Grade Unit: %Intercept: 14.9 mView all detailsHide details
Identity
- Hole ID
- R-0085
- Project
- Radar Critical Minerals
- Commodity
- iron_ore
- Region
- labrador
- Reported Region
- labrador
- Ticker
- SAGA.V
Geometry
- Grade
- 52.75
- Grade Unit
- %
- Intercept
- 14.9 m
- Hole Depth
- 503 m
Classification
- Deposit Type
- other
- Program
- resource
- Sample Type
- drill
- Mining Method
- open_pit
Location
- Azimuth
- 218 °
- Dip
- -55 °
QA/QC
- Laboratory
- Impact Global Solutions (IGS)
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-10-07T00:00:00.000Z
Reasoning: This high-grade sub-interval contributes positively to the overall resource definition for the MRE, despite the iron grade being moderate.
Positive factors
- High-grade sub-interval
- Consistent polymetallic mineralization
- Part of MRE drill program
Negative factors
- Iron grade is in the 'weak' category
- True width not provided for this intercept
Evidence · text
“Including 14.9 m @ 52.75% Fe2O3, 8.35% TiO2, 0.437% V2O5”
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
R-0085Radar Critical Minerals · titaniumGrade: 8.35Grade Unit: %Intercept: 14.9 mView all detailsHide details
Identity
- Hole ID
- R-0085
- Project
- Radar Critical Minerals
- Commodity
- titanium
- Region
- labrador
- Reported Region
- labrador
- Ticker
- SAGA.V
Geometry
- Grade
- 8.35
- Grade Unit
- %
- Intercept
- 14.9 m
- Hole Depth
- 503 m
Classification
- Deposit Type
- other
- Program
- resource
- Sample Type
- drill
- Mining Method
- open_pit
Location
- Azimuth
- 218 °
- Dip
- -55 °
QA/QC
- Laboratory
- Impact Global Solutions (IGS)
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-10-07T00:00:00.000Z
Reasoning: This high-grade sub-interval contributes positively to the overall resource definition for the MRE.
Positive factors
- High-grade sub-interval
- Consistent polymetallic mineralization
- Part of MRE drill program
Negative factors
- True width not provided for this intercept
Evidence · text
“Including 14.9 m @ 52.75% Fe2O3, 8.35% TiO2, 0.437% V2O5”
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
R-0085Radar Critical Minerals · vanadiumGrade: 0.437Grade Unit: %Intercept: 14.9 mView all detailsHide details
Identity
- Hole ID
- R-0085
- Project
- Radar Critical Minerals
- Commodity
- vanadium
- Region
- labrador
- Reported Region
- labrador
- Ticker
- SAGA.V
Geometry
- Grade
- 0.437
- Grade Unit
- %
- Intercept
- 14.9 m
- Hole Depth
- 503 m
Classification
- Deposit Type
- other
- Program
- resource
- Sample Type
- drill
- Mining Method
- open_pit
Location
- Azimuth
- 218 °
- Dip
- -55 °
QA/QC
- Laboratory
- Impact Global Solutions (IGS)
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-10-07T00:00:00.000Z
Reasoning: This high-grade sub-interval contributes positively to the overall resource definition for the MRE.
Positive factors
- High-grade sub-interval
- Consistent polymetallic mineralization
- Part of MRE drill program
Negative factors
- True width not provided for this intercept
Evidence · text
“Including 14.9 m @ 52.75% Fe2O3, 8.35% TiO2, 0.437% V2O5”
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
R-0085Radar Critical Minerals · iron_oreGrade: 44.75Grade Unit: %Intercept: 203.2 mView all detailsHide details
Identity
- Hole ID
- R-0085
- Project
- Radar Critical Minerals
- Commodity
- iron_ore
- Region
- labrador
- Reported Region
- labrador
- Ticker
- SAGA.V
Geometry
- Grade
- 44.75
- Grade Unit
- %
- Intercept
- 203.2 m
- Hole Depth
- 503 m
Classification
- Deposit Type
- other
- Program
- resource
- Sample Type
- drill
- Mining Method
- open_pit
Location
- Azimuth
- 218 °
- Dip
- -55 °
QA/QC
- Laboratory
- Impact Global Solutions (IGS)
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-10-07T00:00:00.000Z
Reasoning: This very wide sub-interval with consistent polymetallic mineralization is highly material for the MRE, despite the moderate iron grade.
Positive factors
- Very wide sub-interval
- Consistent polymetallic mineralization
- Part of MRE drill program
Negative factors
- Iron grade is in the 'weak' category
- True width not provided for this intercept
Evidence · text
“Including 203.2 m @ 44.75% Fe2O3, 6.77% TiO2, 0.336% V2O5”
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
R-0085Radar Critical Minerals · titaniumGrade: 6.77Grade Unit: %Intercept: 203.2 mView all detailsHide details
Identity
- Hole ID
- R-0085
- Project
- Radar Critical Minerals
- Commodity
- titanium
- Region
- labrador
- Reported Region
- labrador
- Ticker
- SAGA.V
Geometry
- Grade
- 6.77
- Grade Unit
- %
- Intercept
- 203.2 m
- Hole Depth
- 503 m
Classification
- Deposit Type
- other
- Program
- resource
- Sample Type
- drill
- Mining Method
- open_pit
Location
- Azimuth
- 218 °
- Dip
- -55 °
QA/QC
- Laboratory
- Impact Global Solutions (IGS)
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-10-07T00:00:00.000Z
Reasoning: This very wide sub-interval with consistent polymetallic mineralization is highly material for the MRE.
Positive factors
- Very wide sub-interval
- Consistent polymetallic mineralization
- Part of MRE drill program
Negative factors
- True width not provided for this intercept
Evidence · text
“Including 203.2 m @ 44.75% Fe2O3, 6.77% TiO2, 0.336% V2O5”
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
R-0085Radar Critical Minerals · vanadiumGrade: 0.336Grade Unit: %Intercept: 203.2 mView all detailsHide details
Identity
- Hole ID
- R-0085
- Project
- Radar Critical Minerals
- Commodity
- vanadium
- Region
- labrador
- Reported Region
- labrador
- Ticker
- SAGA.V
Geometry
- Grade
- 0.336
- Grade Unit
- %
- Intercept
- 203.2 m
- Hole Depth
- 503 m
Classification
- Deposit Type
- other
- Program
- resource
- Sample Type
- drill
- Mining Method
- open_pit
Location
- Azimuth
- 218 °
- Dip
- -55 °
QA/QC
- Laboratory
- Impact Global Solutions (IGS)
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-10-07T00:00:00.000Z
Reasoning: This very wide sub-interval with consistent polymetallic mineralization is highly material for the MRE.
Positive factors
- Very wide sub-interval
- Consistent polymetallic mineralization
- Part of MRE drill program
Negative factors
- True width not provided for this intercept
Evidence · text
“Including 203.2 m @ 44.75% Fe2O3, 6.77% TiO2, 0.336% V2O5”
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
R-0085Radar Critical Minerals · iron_oreGrade: 52.95Grade Unit: %Intercept: 68.2 mView all detailsHide details
Identity
- Hole ID
- R-0085
- Project
- Radar Critical Minerals
- Commodity
- iron_ore
- Region
- labrador
- Reported Region
- labrador
- Ticker
- SAGA.V
Geometry
- Grade
- 52.95
- Grade Unit
- %
- Intercept
- 68.2 m
- Hole Depth
- 503 m
Classification
- Deposit Type
- other
- Program
- resource
- Sample Type
- drill
- Mining Method
- open_pit
Location
- Azimuth
- 218 °
- Dip
- -55 °
QA/QC
- Laboratory
- Impact Global Solutions (IGS)
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-10-07T00:00:00.000Z
Reasoning: This high-grade, significant width sub-interval is very positive for the MRE, despite the iron grade being moderate.
Positive factors
- High-grade sub-interval
- Significant width
- Consistent polymetallic mineralization
- Part of MRE drill program
Negative factors
- Iron grade is in the 'weak' category
- True width not provided for this intercept
Evidence · text
“Including 68.2 m @ 52.95% Fe2O3, 8.57% TiO2, 0.381% V2O5”
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
R-0085Radar Critical Minerals · titaniumGrade: 8.57Grade Unit: %Intercept: 68.2 mView all detailsHide details
Identity
- Hole ID
- R-0085
- Project
- Radar Critical Minerals
- Commodity
- titanium
- Region
- labrador
- Reported Region
- labrador
- Ticker
- SAGA.V
Geometry
- Grade
- 8.57
- Grade Unit
- %
- Intercept
- 68.2 m
- Hole Depth
- 503 m
Classification
- Deposit Type
- other
- Program
- resource
- Sample Type
- drill
- Mining Method
- open_pit
Location
- Azimuth
- 218 °
- Dip
- -55 °
QA/QC
- Laboratory
- Impact Global Solutions (IGS)
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-10-07T00:00:00.000Z
Reasoning: This high-grade, significant width sub-interval is very positive for the MRE.
Positive factors
- High-grade sub-interval
- Significant width
- Consistent polymetallic mineralization
- Part of MRE drill program
Negative factors
- True width not provided for this intercept
Evidence · text
“Including 68.2 m @ 52.95% Fe2O3, 8.57% TiO2, 0.381% V2O5”
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
R-0085Radar Critical Minerals · vanadiumGrade: 0.381Grade Unit: %Intercept: 68.2 mView all detailsHide details
Identity
- Hole ID
- R-0085
- Project
- Radar Critical Minerals
- Commodity
- vanadium
- Region
- labrador
- Reported Region
- labrador
- Ticker
- SAGA.V
Geometry
- Grade
- 0.381
- Grade Unit
- %
- Intercept
- 68.2 m
- Hole Depth
- 503 m
Classification
- Deposit Type
- other
- Program
- resource
- Sample Type
- drill
- Mining Method
- open_pit
Location
- Azimuth
- 218 °
- Dip
- -55 °
QA/QC
- Laboratory
- Impact Global Solutions (IGS)
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-10-07T00:00:00.000Z
Reasoning: This high-grade, significant width sub-interval is very positive for the MRE.
Positive factors
- High-grade sub-interval
- Significant width
- Consistent polymetallic mineralization
- Part of MRE drill program
Negative factors
- True width not provided for this intercept
Evidence · text
“Including 68.2 m @ 52.95% Fe2O3, 8.57% TiO2, 0.381% V2O5”
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
R-0085Radar Critical Minerals · iron_oreGrade: 43.36Grade Unit: %Intercept: 89 mView all detailsHide details
Identity
- Hole ID
- R-0085
- Project
- Radar Critical Minerals
- Commodity
- iron_ore
- Region
- labrador
- Reported Region
- labrador
- Ticker
- SAGA.V
Geometry
- Grade
- 43.36
- Grade Unit
- %
- Intercept
- 89 m
- Hole Depth
- 503 m
Classification
- Deposit Type
- other
- Program
- resource
- Sample Type
- drill
- Mining Method
- open_pit
Location
- Azimuth
- 218 °
- Dip
- -55 °
QA/QC
- Laboratory
- Impact Global Solutions (IGS)
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-10-07T00:00:00.000Z
Reasoning: This significant width sub-interval with consistent polymetallic mineralization is positive for the MRE, despite the moderate iron grade.
Positive factors
- Significant width sub-interval
- Consistent polymetallic mineralization
- Part of MRE drill program
Negative factors
- Iron grade is in the 'weak' category
- True width not provided for this intercept
Evidence · text
“Including 89.0 m @ 43.36% Fe2O3, 6.39% TiO2, 0.328% V2O5”
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
R-0085Radar Critical Minerals · titaniumGrade: 6.39Grade Unit: %Intercept: 89 mView all detailsHide details
Identity
- Hole ID
- R-0085
- Project
- Radar Critical Minerals
- Commodity
- titanium
- Region
- labrador
- Reported Region
- labrador
- Ticker
- SAGA.V
Geometry
- Grade
- 6.39
- Grade Unit
- %
- Intercept
- 89 m
- Hole Depth
- 503 m
Classification
- Deposit Type
- other
- Program
- resource
- Sample Type
- drill
- Mining Method
- open_pit
Location
- Azimuth
- 218 °
- Dip
- -55 °
QA/QC
- Laboratory
- Impact Global Solutions (IGS)
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-10-07T00:00:00.000Z
Reasoning: This significant width sub-interval with consistent polymetallic mineralization is positive for the MRE.
Positive factors
- Significant width sub-interval
- Consistent polymetallic mineralization
- Part of MRE drill program
Negative factors
- True width not provided for this intercept
Evidence · text
“Including 89.0 m @ 43.36% Fe2O3, 6.39% TiO2, 0.328% V2O5”
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
R-0085Radar Critical Minerals · vanadiumGrade: 0.328Grade Unit: %Intercept: 89 mView all detailsHide details
Identity
- Hole ID
- R-0085
- Project
- Radar Critical Minerals
- Commodity
- vanadium
- Region
- labrador
- Reported Region
- labrador
- Ticker
- SAGA.V
Geometry
- Grade
- 0.328
- Grade Unit
- %
- Intercept
- 89 m
- Hole Depth
- 503 m
Classification
- Deposit Type
- other
- Program
- resource
- Sample Type
- drill
- Mining Method
- open_pit
Location
- Azimuth
- 218 °
- Dip
- -55 °
QA/QC
- Laboratory
- Impact Global Solutions (IGS)
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-10-07T00:00:00.000Z
Reasoning: This significant width sub-interval with consistent polymetallic mineralization is positive for the MRE.
Positive factors
- Significant width sub-interval
- Consistent polymetallic mineralization
- Part of MRE drill program
Negative factors
- True width not provided for this intercept
Evidence · text
“Including 89.0 m @ 43.36% Fe2O3, 6.39% TiO2, 0.328% V2O5”
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
R-0085Radar Critical Minerals · iron_oreGrade: 45.84Grade Unit: %Intercept: 16.9 mView all detailsHide details
Identity
- Hole ID
- R-0085
- Project
- Radar Critical Minerals
- Commodity
- iron_ore
- Region
- labrador
- Reported Region
- labrador
- Ticker
- SAGA.V
Geometry
- Grade
- 45.84
- Grade Unit
- %
- Intercept
- 16.9 m
- Hole Depth
- 503 m
Classification
- Deposit Type
- other
- Program
- resource
- Sample Type
- drill
- Mining Method
- open_pit
Location
- Azimuth
- 218 °
- Dip
- -55 °
QA/QC
- Laboratory
- Impact Global Solutions (IGS)
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-10-07T00:00:00.000Z
Reasoning: This sub-interval shows good iron grade and consistent polymetallic mineralization, contributing to the MRE, despite the moderate iron grade.
Positive factors
- Good iron grade
- Consistent polymetallic mineralization
- Part of MRE drill program
Negative factors
- Iron grade is in the 'weak' category
- True width not provided for this intercept
Evidence · text
“Including 16.9 m @ 45.84% Fe2O3, 6.74% TiO2, 0.377% V2O5”
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
R-0085Radar Critical Minerals · titaniumGrade: 6.74Grade Unit: %Intercept: 16.9 mView all detailsHide details
Identity
- Hole ID
- R-0085
- Project
- Radar Critical Minerals
- Commodity
- titanium
- Region
- labrador
- Reported Region
- labrador
- Ticker
- SAGA.V
Geometry
- Grade
- 6.74
- Grade Unit
- %
- Intercept
- 16.9 m
- Hole Depth
- 503 m
Classification
- Deposit Type
- other
- Program
- resource
- Sample Type
- drill
- Mining Method
- open_pit
Location
- Azimuth
- 218 °
- Dip
- -55 °
QA/QC
- Laboratory
- Impact Global Solutions (IGS)
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-10-07T00:00:00.000Z
Reasoning: This sub-interval shows good titanium grade and consistent polymetallic mineralization, contributing to the MRE.
Positive factors
- Good titanium grade
- Consistent polymetallic mineralization
- Part of MRE drill program
Negative factors
- True width not provided for this intercept
Evidence · text
“Including 16.9 m @ 45.84% Fe2O3, 6.74% TiO2, 0.377% V2O5”
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
R-0085Radar Critical Minerals · vanadiumGrade: 0.377Grade Unit: %Intercept: 16.9 mView all detailsHide details
Identity
- Hole ID
- R-0085
- Project
- Radar Critical Minerals
- Commodity
- vanadium
- Region
- labrador
- Reported Region
- labrador
- Ticker
- SAGA.V
Geometry
- Grade
- 0.377
- Grade Unit
- %
- Intercept
- 16.9 m
- Hole Depth
- 503 m
Classification
- Deposit Type
- other
- Program
- resource
- Sample Type
- drill
- Mining Method
- open_pit
Location
- Azimuth
- 218 °
- Dip
- -55 °
QA/QC
- Laboratory
- Impact Global Solutions (IGS)
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-10-07T00:00:00.000Z
Reasoning: This sub-interval shows good vanadium grade and consistent polymetallic mineralization, contributing to the MRE.
Positive factors
- Good vanadium grade
- Consistent polymetallic mineralization
- Part of MRE drill program
Negative factors
- True width not provided for this intercept
Evidence · text
“Including 16.9 m @ 45.84% Fe2O3, 6.74% TiO2, 0.377% V2O5”
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
R-0086Radar Critical Minerals · iron_oreGrade: 42.44Grade Unit: %Intercept: 46.3 mView all detailsHide details
Identity
- Hole ID
- R-0086
- Project
- Radar Critical Minerals
- Commodity
- iron_ore
- Region
- labrador
- Reported Region
- labrador
- Ticker
- SAGA.V
Geometry
- Grade
- 42.44
- Grade Unit
- %
- Intercept
- 46.3 m
- Hole Depth
- 131 m
Classification
- Deposit Type
- other
- Program
- resource
- Sample Type
- drill
- Mining Method
- open_pit
Location
- Azimuth
- 38 °
- Dip
- -45 °
QA/QC
- Laboratory
- Impact Global Solutions (IGS)
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-10-07T00:00:00.000Z
Reasoning: This intercept shows good iron grade and consistent polymetallic mineralization, contributing to the MRE, despite the moderate iron grade.
Positive factors
- Good iron grade
- Consistent polymetallic mineralization
- Part of MRE drill program
Negative factors
- Iron grade is in the 'weak' category
- True width not provided for this intercept
Evidence · text
“Hole R-0086: 46.3 m @ 42.44% Fe2O3, 6.77% TiO2, 0.286% V2O5”
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
R-0086Radar Critical Minerals · titaniumGrade: 6.77Grade Unit: %Intercept: 46.3 mView all detailsHide details
Identity
- Hole ID
- R-0086
- Project
- Radar Critical Minerals
- Commodity
- titanium
- Region
- labrador
- Reported Region
- labrador
- Ticker
- SAGA.V
Geometry
- Grade
- 6.77
- Grade Unit
- %
- Intercept
- 46.3 m
- Hole Depth
- 131 m
Classification
- Deposit Type
- other
- Program
- resource
- Sample Type
- drill
- Mining Method
- open_pit
Location
- Azimuth
- 38 °
- Dip
- -45 °
QA/QC
- Laboratory
- Impact Global Solutions (IGS)
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-10-07T00:00:00.000Z
Reasoning: This intercept shows good titanium grade and consistent polymetallic mineralization, contributing to the MRE.
Positive factors
- Good titanium grade
- Consistent polymetallic mineralization
- Part of MRE drill program
Negative factors
- True width not provided for this intercept
Evidence · text
“Hole R-0086: 46.3 m @ 42.44% Fe2O3, 6.77% TiO2, 0.286% V2O5”
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
R-0086Radar Critical Minerals · vanadiumGrade: 0.286Grade Unit: %Intercept: 46.3 mView all detailsHide details
Identity
- Hole ID
- R-0086
- Project
- Radar Critical Minerals
- Commodity
- vanadium
- Region
- labrador
- Reported Region
- labrador
- Ticker
- SAGA.V
Geometry
- Grade
- 0.286
- Grade Unit
- %
- Intercept
- 46.3 m
- Hole Depth
- 131 m
Classification
- Deposit Type
- other
- Program
- resource
- Sample Type
- drill
- Mining Method
- open_pit
Location
- Azimuth
- 38 °
- Dip
- -45 °
QA/QC
- Laboratory
- Impact Global Solutions (IGS)
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-10-07T00:00:00.000Z
Reasoning: This intercept shows good vanadium grade and consistent polymetallic mineralization, contributing to the MRE.
Positive factors
- Good vanadium grade
- Consistent polymetallic mineralization
- Part of MRE drill program
Negative factors
- True width not provided for this intercept
Evidence · text
“Hole R-0086: 46.3 m @ 42.44% Fe2O3, 6.77% TiO2, 0.286% V2O5”
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
R-0087Radar Critical Minerals · iron_oreGrade: 46.24Grade Unit: %Intercept: 43.1 mView all detailsHide details
Identity
- Hole ID
- R-0087
- Project
- Radar Critical Minerals
- Commodity
- iron_ore
- Region
- labrador
- Reported Region
- labrador
- Ticker
- SAGA.V
Geometry
- Grade
- 46.24
- Grade Unit
- %
- Intercept
- 43.1 m
- Hole Depth
- 89 m
Classification
- Deposit Type
- other
- Program
- resource
- Sample Type
- drill
- Mining Method
- open_pit
Location
- Azimuth
- 218 °
- Dip
- 80 °
QA/QC
- Laboratory
- Impact Global Solutions (IGS)
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-10-07T00:00:00.000Z
Reasoning: This intercept shows good iron grade and consistent polymetallic mineralization, contributing to the MRE, despite the moderate iron grade.
Positive factors
- Good iron grade
- Consistent polymetallic mineralization
- Part of MRE drill program
Negative factors
- Iron grade is in the 'weak' category
- True width not provided for this intercept
Evidence · text
“Hole R-0087: 43.1 m @ 46.24% Fe2O3, 7.87% TiO2, 0.279% V2O5”
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
R-0087Radar Critical Minerals · titaniumGrade: 7.87Grade Unit: %Intercept: 43.1 mView all detailsHide details
Identity
- Hole ID
- R-0087
- Project
- Radar Critical Minerals
- Commodity
- titanium
- Region
- labrador
- Reported Region
- labrador
- Ticker
- SAGA.V
Geometry
- Grade
- 7.87
- Grade Unit
- %
- Intercept
- 43.1 m
- Hole Depth
- 89 m
Classification
- Deposit Type
- other
- Program
- resource
- Sample Type
- drill
- Mining Method
- open_pit
Location
- Azimuth
- 218 °
- Dip
- 80 °
QA/QC
- Laboratory
- Impact Global Solutions (IGS)
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-10-07T00:00:00.000Z
Reasoning: This intercept shows good titanium grade and consistent polymetallic mineralization, contributing to the MRE.
Positive factors
- Good titanium grade
- Consistent polymetallic mineralization
- Part of MRE drill program
Negative factors
- True width not provided for this intercept
Evidence · text
“Hole R-0087: 43.1 m @ 46.24% Fe2O3, 7.87% TiO2, 0.279% V2O5”
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
R-0087Radar Critical Minerals · vanadiumGrade: 0.279Grade Unit: %Intercept: 43.1 mView all detailsHide details
Identity
- Hole ID
- R-0087
- Project
- Radar Critical Minerals
- Commodity
- vanadium
- Region
- labrador
- Reported Region
- labrador
- Ticker
- SAGA.V
Geometry
- Grade
- 0.279
- Grade Unit
- %
- Intercept
- 43.1 m
- Hole Depth
- 89 m
Classification
- Deposit Type
- other
- Program
- resource
- Sample Type
- drill
- Mining Method
- open_pit
Location
- Azimuth
- 218 °
- Dip
- 80 °
QA/QC
- Laboratory
- Impact Global Solutions (IGS)
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-10-07T00:00:00.000Z
Reasoning: This intercept shows good vanadium grade and consistent polymetallic mineralization, contributing to the MRE.
Positive factors
- Good vanadium grade
- Consistent polymetallic mineralization
- Part of MRE drill program
Negative factors
- True width not provided for this intercept
Evidence · text
“Hole R-0087: 43.1 m @ 46.24% Fe2O3, 7.87% TiO2, 0.279% V2O5”
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
How Atlas produces this analysis
Minestarters Atlas uses automated extraction to summarize mining announcements, identify reported measurements, and classify supporting evidence. Sentiment reflects the extracted narrative and classification rules; it is an interpretation, not a reported measurement. Evidence quotes and context are provided where available. Missing data, low-confidence results, and review flags indicate limitations. Check the original publisher announcement before relying on an interpretation.