RIM: 2026 Annual Report to Shareholders
Original announcement by asx on
- Company
- Rimfire Pacific Mining Limited
- Ticker
- RIM
- Exchange
- ASX
- Region
- New South Wales
- Primary commodity
- Scandium
- Secondary commodities
- Gold, Antimony, Silver, Lead, Zinc, Cobalt, Nickel, Copper, Platinum
- Document categories
- Drill results, Resource update, Metallurgy
- Extracted
- 2026-09-30 06:16:18 UTC
Analysis by Minestarters Atlas
Atlas analysis published:
Minestarters Atlas analysis
Summary
Rimfire Pacific Mining Limited's 2026 Annual Report details substantial growth in its scandium resource inventory, including a maiden Mineral Resource Estimate for the Currajong deposit and an updated MRE for Murga. Initial metallurgical test work on Murga scandium yielded encouraging results for atmospheric leaching. The company also confirmed historical drill intercepts at its Broken Hill project and completed a capital raise, despite facing a material uncertainty regarding its going concern status due to financial losses and cash outflows.
Reasoning: The annual report highlights significant progress in scandium resource growth and promising initial metallurgical results, which are key to the company's strategy. However, the preliminary nature of some results, the re-statement of older resource estimates, and the auditor's note on going concern temper the overall positive outlook.
Positive factors
- Significant increase in scandium resource inventory across multiple projects, including a maiden MRE for Currajong.
- Encouraging preliminary metallurgical test work for Murga scandium, suggesting potential for economic recovery using atmospheric leaching.
- Confirmation of historical gold and antimony drill intercepts at Windy Ridge validates prospectivity.
- Successful capital raise provides funding for ongoing exploration and development.
- Board renewal with appointment of experienced mining executive as Executive Chair.
Negative factors
- The company incurred a loss and had net cash outflows, with current liabilities exceeding current assets, leading to a material uncertainty regarding going concern.
- Metallurgical test work is preliminary (bottle rolls only) and potential recoveries are not yet confirmed.
- Resource estimates for Melrose and Sorpresa are stale, with effective dates over two years old.
- Some capital raise funds are subject to shareholder approval, introducing a degree of uncertainty.
Low confidence — this extraction should be reviewed alongside the original source.
Facts used in scoring: 64
Classification and evidence
JORC Compliantpositive
Resource estimate prepared in compliance with JORC Code (Australia) — high reporting standard.
Why it applies: The Murga Scandium Deposit Mineral Resource Estimate is reported in accordance with the 2012 JORC Code and Guidelines.
Evidence · text
“reported in accordance with the 2012 JORC Code and Guidelines”
QP/CP Signedpositive
Qualified Person (QP) or Competent Person (CP) named and signed off — a member of a recognized professional association (e.g., AusIMM, SME, AIG, P.Geo) with relevant experience.
Why it applies: The Mineral Resource estimate for Murga was updated by H&S Consultants Pty Ltd, and the Competent Person Simon Tear is named.
Evidence · text
“H&S Consultants Pty Ltd (“HSC”) was engaged by Rimfire to update the Mineral Resource estimate for the Murga Scandium Deposit”
Inferred Resourcenegative
Speculative category — limited drilling, geological continuity assumed but not confirmed. Cannot support economic studies alone.
Why it applies: The Murga Scandium Deposit Mineral Resource is entirely classified as Inferred.
Evidence · table
“Inferred”
Context: 56.1
Stale Estimatenegative
Effective date is >2 years old — data currency concern, may not reflect current geological understanding.
Why it applies: The Melrose Mineral Resource Estimate was previously released on 9 September 2024, which is over two years prior to the current report date of 30 September 2026.
Evidence · text
“Details of the Melrose, Murga, and Currajong Mineral Resource Estimates were previously released by Rimfire in ASX dated 9 September 2024”
Maiden Resourceneutral
First formal MRE for the project — establishes baseline but typically exploration-stage with high Inferred component.
Why it applies: The Currajong Scandium Deposit is a maiden Mineral Resource Estimate.
Evidence · text
“Rimfire announced a maiden scandium Mineral Resource Estimate for the Currajong Scandium Deposit”
Inferred Resourcenegative
Speculative category — limited drilling, geological continuity assumed but not confirmed. Cannot support economic studies alone.
Why it applies: The Currajong Scandium Deposit Mineral Resource is entirely classified as Inferred.
Evidence · table
“Inferred”
Context: 3.8
Stale Estimatenegative
Effective date is >2 years old — data currency concern, may not reflect current geological understanding.
Why it applies: The Sorpresa Combined Gold Silver Mineral Resource was released on 6 November 2019, which is over five years prior to the current report date of 30 September 2026.
Evidence · text
“Summary of Mineral Resources – Sorpresa Combined Gold Silver (RIM ASX Release 6/11/2019)*”
Stale Data Re-releasenegative
Historical results re-announced with no new assays or reinterpretation — low genuine novelty.
Why it applies: The Sorpresa Mineral Resources have had no changes over the Financial Year and are re-released historical data.
Evidence · text
“there has been no changes to the Sorpresa Mineral Resources over the Financial Year.”
Bench Scale Onlynegative
Only preliminary bench tests completed — no locked-cycle or pilot work.
Why it applies: The metallurgical test work for Murga Scandium was preliminary and conducted as 14-day Bottle Rolls.
Evidence · text
“preliminary metallurgical test work (14-day Bottle Rolls)”
Theoretical Recovery Onlynegative
Only theoretical or liberation-derived recovery reported, with no actual test result.
Why it applies: The reported scandium recoveries of 60-90% are 'potential' and 'could be achieved', subject to further testing, indicating they are not actual achieved results.
Evidence · text
“scandium recoveries of 60 – 90% could potentially be achieved”
Stale Data Re-releasenegative
Historical results re-announced with no new assays or reinterpretation — low genuine novelty.
Why it applies: The Malamute drill intercepts are from 'previous drilling' and are being re-stated in this report.
Evidence · text
“previous drilling of which has returned multiple drill intercepts”
Apparent Width Onlynegative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Why it applies: The drill intercepts for Malamute are given as downhole widths with no true width or drill orientation disclosed.
Evidence · text
“30m @ 247ppm Sc (378ppm Sc Oxide) from 25 metres in FI2963”
Stale Data Re-releasenegative
Historical results re-announced with no new assays or reinterpretation — low genuine novelty.
Why it applies: The Windy Ridge drill intercepts are from 'original diamond drill core (drilled 40 – 50 years ago)' and are being re-stated and confirmed through resampling.
Evidence · text
“resampling and analysis of original diamond drill core (drilled 40 – 50 years ago) from its Windy Ridge Gold Antimony Prospect has confirmed and validated original gold (Au) antimony (Sb) drill intercepts.”
Apparent Width Onlynegative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Why it applies: The drill intercepts for Windy Ridge are given as downhole widths with no true width or drill orientation disclosed.
Evidence · text
“6m @ 0.48g/t gold, 0.65% antimony from 214 metres”
Heap Leach Routeneutral
Processing via heap leach — lower CAPEX and OPEX, lower recovery expected.
Why it applies: the document describes a heap_leach route ("heap leach")
Single Domain Onlynegative
Testing limited to one composite or domain — representativeness not established.
Why it applies: only one composite was tested
Extracted facts
Stored fact records: 64. Some facts used in scoring do not have a stored record.
Drill Results (44)
FI2963Malamute Scandium Prospect · scandiumGrade: 247Grade Unit: ppmIntercept: 30 mHistorical resultNeeds review: historical_restatementView all detailsHide details
Identity
- Hole ID
- FI2963
- Project
- Malamute Scandium Prospect
- Commodity
- scandium
- Region
- australia_nsw
- Reported Region
- australia_nsw
- Ticker
- RIM
Geometry
- Grade
- 247
- Grade Unit
- ppm
- Intercept
- 30 m
- From
- 25 m
- To
- 55 m
- Intercept Depth
- 25 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- FI2963:25-55
Compositing
- Dilution Disclosed
- Yes
Review
- Needs Review
- Yes
- Review Reason
- historical_restatement
- Interp. Status
- scored
- Historical
- Yes
- Historical Source Date
- 2026-03-05T00:00:00.000Z
Dates
- Event date
- 2026-09-30T00:00:00.000Z
Reasoning: This historical intercept confirms good scandium grades and widths at Malamute, but its re-release limits novelty.
Positive factors
- Good scandium grade over a significant width.
- Confirms known scandium mineralisation.
Negative factors
- This is a re-statement of previous drilling results, reducing novelty.
- No true width disclosed.
Evidence · text
“30m @ 247ppm Sc (378ppm Sc Oxide) from 25 metres in FI2963”
Tags used in scoring
No QA/QC Disclosurenegative
Release does not disclose QA/QC — lab certification, CP/QP sign-off and assay protocols cannot be checked from this document.
Why it applies: qaqc_disclosed is not true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Stale Data Re-releasenegative
Historical results re-announced with no new assays or reinterpretation — low genuine novelty.
Why it applies: the fact restates a prior release
FI2963Malamute Scandium Prospect · scandiumGrade: 352Grade Unit: ppmIntercept: 16 mHistorical resultNeeds review: historical_restatementView all detailsHide details
Identity
- Hole ID
- FI2963
- Project
- Malamute Scandium Prospect
- Commodity
- scandium
- Region
- australia_nsw
- Reported Region
- australia_nsw
- Ticker
- RIM
Geometry
- Grade
- 352
- Grade Unit
- ppm
- Intercept
- 16 m
- From
- 25 m
- To
- 41 m
- Intercept Depth
- 25 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- FI2963:25-41
Compositing
- Dilution Disclosed
- Yes
Review
- Needs Review
- Yes
- Review Reason
- historical_restatement
- Interp. Status
- scored
- Historical
- Yes
- Historical Source Date
- 2026-03-05T00:00:00.000Z
Dates
- Event date
- 2026-09-30T00:00:00.000Z
Reasoning: This higher-grade sub-interval within a historical intercept further confirms good scandium grades at Malamute, but its re-release limits novelty.
Positive factors
- Higher scandium grade within a significant interval.
- Confirms known scandium mineralisation.
Negative factors
- This is a re-statement of previous drilling results, reducing novelty.
- No true width disclosed.
Evidence · text
“including 16m @ 352ppm Sc (540ppm Sc Oxide)”
Tags used in scoring
No QA/QC Disclosurenegative
Release does not disclose QA/QC — lab certification, CP/QP sign-off and assay protocols cannot be checked from this document.
Why it applies: qaqc_disclosed is not true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Stale Data Re-releasenegative
Historical results re-announced with no new assays or reinterpretation — low genuine novelty.
Why it applies: the fact restates a prior release
MA44Malamute Scandium Prospect · scandiumGrade: 242Grade Unit: ppmIntercept: 9 mHistorical resultNeeds review: historical_restatementView all detailsHide details
Identity
- Hole ID
- MA44
- Project
- Malamute Scandium Prospect
- Commodity
- scandium
- Region
- australia_nsw
- Reported Region
- australia_nsw
- Ticker
- RIM
Geometry
- Grade
- 242
- Grade Unit
- ppm
- Intercept
- 9 m
- From
- 34 m
- To
- 43 m
- Intercept Depth
- 34 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- MA44:34-43
Compositing
- Dilution Disclosed
- Yes
Review
- Needs Review
- Yes
- Review Reason
- historical_restatement
- Interp. Status
- scored
- Historical
- Yes
- Historical Source Date
- 2026-03-05T00:00:00.000Z
Dates
- Event date
- 2026-09-30T00:00:00.000Z
Reasoning: This historical intercept confirms good scandium grades and widths at Malamute, but its re-release limits novelty.
Positive factors
- Good scandium grade over a moderate width.
- Confirms known scandium mineralisation.
Negative factors
- This is a re-statement of previous drilling results, reducing novelty.
- No true width disclosed.
Evidence · text
“9m @ 242ppm Sc (371ppm Sc Oxide) from 34m in MA44”
Tags used in scoring
No QA/QC Disclosurenegative
Release does not disclose QA/QC — lab certification, CP/QP sign-off and assay protocols cannot be checked from this document.
Why it applies: qaqc_disclosed is not true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Stale Data Re-releasenegative
Historical results re-announced with no new assays or reinterpretation — low genuine novelty.
Why it applies: the fact restates a prior release
MA44Malamute Scandium Prospect · scandiumGrade: 373Grade Unit: ppmIntercept: 3 mHistorical resultNeeds review: historical_restatementView all detailsHide details
Identity
- Hole ID
- MA44
- Project
- Malamute Scandium Prospect
- Commodity
- scandium
- Region
- australia_nsw
- Reported Region
- australia_nsw
- Ticker
- RIM
Geometry
- Grade
- 373
- Grade Unit
- ppm
- Intercept
- 3 m
- From
- 34 m
- To
- 37 m
- Intercept Depth
- 34 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- MA44:34-37
Compositing
- Dilution Disclosed
- Yes
Review
- Needs Review
- Yes
- Review Reason
- historical_restatement
- Interp. Status
- scored
- Historical
- Yes
- Historical Source Date
- 2026-03-05T00:00:00.000Z
Dates
- Event date
- 2026-09-30T00:00:00.000Z
Reasoning: This higher-grade sub-interval within a historical intercept further confirms good scandium grades at Malamute, but its re-release limits novelty.
Positive factors
- Higher scandium grade within a moderate interval.
- Confirms known scandium mineralisation.
Negative factors
- This is a re-statement of previous drilling results, reducing novelty.
- No true width disclosed.
Evidence · text
“including 3m @ 373ppm Sc (572ppm Sc Oxide)”
Tags used in scoring
No QA/QC Disclosurenegative
Release does not disclose QA/QC — lab certification, CP/QP sign-off and assay protocols cannot be checked from this document.
Why it applies: qaqc_disclosed is not true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Stale Data Re-releasenegative
Historical results re-announced with no new assays or reinterpretation — low genuine novelty.
Why it applies: the fact restates a prior release
MA48Malamute Scandium Prospect · scandiumGrade: 270Grade Unit: ppmIntercept: 10 mHistorical resultNeeds review: historical_restatementView all detailsHide details
Identity
- Hole ID
- MA48
- Project
- Malamute Scandium Prospect
- Commodity
- scandium
- Region
- australia_nsw
- Reported Region
- australia_nsw
- Ticker
- RIM
Geometry
- Grade
- 270
- Grade Unit
- ppm
- Intercept
- 10 m
- From
- 25 m
- To
- 35 m
- Intercept Depth
- 25 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- MA48:25-35
Compositing
- Dilution Disclosed
- Yes
Review
- Needs Review
- Yes
- Review Reason
- historical_restatement
- Interp. Status
- scored
- Historical
- Yes
- Historical Source Date
- 2026-03-05T00:00:00.000Z
Dates
- Event date
- 2026-09-30T00:00:00.000Z
Reasoning: This historical intercept confirms good scandium grades and widths at Malamute, but its re-release limits novelty.
Positive factors
- Good scandium grade over a moderate width.
- Confirms known scandium mineralisation.
Negative factors
- This is a re-statement of previous drilling results, reducing novelty.
- No true width disclosed.
Evidence · text
“10m @ 270ppm Sc (414ppm Sc Oxide) from 25m in MA48”
Tags used in scoring
No QA/QC Disclosurenegative
Release does not disclose QA/QC — lab certification, CP/QP sign-off and assay protocols cannot be checked from this document.
Why it applies: qaqc_disclosed is not true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Stale Data Re-releasenegative
Historical results re-announced with no new assays or reinterpretation — low genuine novelty.
Why it applies: the fact restates a prior release
MA48Malamute Scandium Prospect · scandiumGrade: 295Grade Unit: ppmIntercept: 4 mHistorical resultNeeds review: historical_restatementView all detailsHide details
Identity
- Hole ID
- MA48
- Project
- Malamute Scandium Prospect
- Commodity
- scandium
- Region
- australia_nsw
- Reported Region
- australia_nsw
- Ticker
- RIM
Geometry
- Grade
- 295
- Grade Unit
- ppm
- Intercept
- 4 m
- From
- 25 m
- To
- 29 m
- Intercept Depth
- 25 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- MA48:25-29
Compositing
- Dilution Disclosed
- Yes
Review
- Needs Review
- Yes
- Review Reason
- historical_restatement
- Interp. Status
- scored
- Historical
- Yes
- Historical Source Date
- 2026-03-05T00:00:00.000Z
Dates
- Event date
- 2026-09-30T00:00:00.000Z
Reasoning: This higher-grade sub-interval within a historical intercept further confirms good scandium grades at Malamute, but its re-release limits novelty.
Positive factors
- Higher scandium grade within a moderate interval.
- Confirms known scandium mineralisation.
Negative factors
- This is a re-statement of previous drilling results, reducing novelty.
- No true width disclosed.
Evidence · text
“including 4m @ 295ppm Sc (452ppm Sc Oxide)”
Tags used in scoring
No QA/QC Disclosurenegative
Release does not disclose QA/QC — lab certification, CP/QP sign-off and assay protocols cannot be checked from this document.
Why it applies: qaqc_disclosed is not true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Stale Data Re-releasenegative
Historical results re-announced with no new assays or reinterpretation — low genuine novelty.
Why it applies: the fact restates a prior release
MA07Malamute Scandium Prospect · scandiumGrade: 217Grade Unit: ppmIntercept: 18 mHistorical resultNeeds review: historical_restatementView all detailsHide details
Identity
- Hole ID
- MA07
- Project
- Malamute Scandium Prospect
- Commodity
- scandium
- Region
- australia_nsw
- Reported Region
- australia_nsw
- Ticker
- RIM
Geometry
- Grade
- 217
- Grade Unit
- ppm
- Intercept
- 18 m
- From
- 30 m
- To
- 48 m
- Intercept Depth
- 30 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- MA07:30-48
Compositing
- Dilution Disclosed
- Yes
Review
- Needs Review
- Yes
- Review Reason
- historical_restatement
- Interp. Status
- scored
- Historical
- Yes
- Historical Source Date
- 2026-03-05T00:00:00.000Z
Dates
- Event date
- 2026-09-30T00:00:00.000Z
Reasoning: This historical intercept confirms good scandium grades and widths at Malamute, but its re-release limits novelty.
Positive factors
- Good scandium grade over a significant width.
- Confirms known scandium mineralisation.
Negative factors
- This is a re-statement of previous drilling results, reducing novelty.
- No true width disclosed.
Evidence · text
“18m @ 217ppm Sc (332ppm Sc Oxide) from 30m in MA07”
Tags used in scoring
No QA/QC Disclosurenegative
Release does not disclose QA/QC — lab certification, CP/QP sign-off and assay protocols cannot be checked from this document.
Why it applies: qaqc_disclosed is not true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Stale Data Re-releasenegative
Historical results re-announced with no new assays or reinterpretation — low genuine novelty.
Why it applies: the fact restates a prior release
MA07Malamute Scandium Prospect · scandiumGrade: 331Grade Unit: ppmIntercept: 6 mHistorical resultNeeds review: historical_restatementView all detailsHide details
Identity
- Hole ID
- MA07
- Project
- Malamute Scandium Prospect
- Commodity
- scandium
- Region
- australia_nsw
- Reported Region
- australia_nsw
- Ticker
- RIM
Geometry
- Grade
- 331
- Grade Unit
- ppm
- Intercept
- 6 m
- From
- 30 m
- To
- 36 m
- Intercept Depth
- 30 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- MA07:30-36
Compositing
- Dilution Disclosed
- Yes
Review
- Needs Review
- Yes
- Review Reason
- historical_restatement
- Interp. Status
- scored
- Historical
- Yes
- Historical Source Date
- 2026-03-05T00:00:00.000Z
Dates
- Event date
- 2026-09-30T00:00:00.000Z
Reasoning: This higher-grade sub-interval within a historical intercept further confirms good scandium grades at Malamute, but its re-release limits novelty.
Positive factors
- Higher scandium grade within a moderate interval.
- Confirms known scandium mineralisation.
Negative factors
- This is a re-statement of previous drilling results, reducing novelty.
- No true width disclosed.
Evidence · text
“including 6m @ 331ppm Sc (508ppm Sc Oxide)”
Tags used in scoring
No QA/QC Disclosurenegative
Release does not disclose QA/QC — lab certification, CP/QP sign-off and assay protocols cannot be checked from this document.
Why it applies: qaqc_disclosed is not true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Stale Data Re-releasenegative
Historical results re-announced with no new assays or reinterpretation — low genuine novelty.
Why it applies: the fact restates a prior release
FI2965Malamute Scandium Prospect · scandiumGrade: 204Grade Unit: ppmIntercept: 9 mHistorical resultNeeds review: historical_restatementView all detailsHide details
Identity
- Hole ID
- FI2965
- Project
- Malamute Scandium Prospect
- Commodity
- scandium
- Region
- australia_nsw
- Reported Region
- australia_nsw
- Ticker
- RIM
Geometry
- Grade
- 204
- Grade Unit
- ppm
- Intercept
- 9 m
- From
- 49 m
- To
- 58 m
- Intercept Depth
- 49 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- FI2965:49-58
Compositing
- Dilution Disclosed
- Yes
Review
- Needs Review
- Yes
- Review Reason
- historical_restatement
- Interp. Status
- scored
- Historical
- Yes
- Historical Source Date
- 2026-03-05T00:00:00.000Z
Dates
- Event date
- 2026-09-30T00:00:00.000Z
Reasoning: This historical intercept confirms good scandium grades and widths at Malamute, but its re-release limits novelty.
Positive factors
- Good scandium grade over a moderate width.
- Confirms known scandium mineralisation.
Negative factors
- This is a re-statement of previous drilling results, reducing novelty.
- No true width disclosed.
Evidence · text
“9m @ 204ppm Sc (314ppm Sc Oxide) from 49 metres in FI2965”
Tags used in scoring
No QA/QC Disclosurenegative
Release does not disclose QA/QC — lab certification, CP/QP sign-off and assay protocols cannot be checked from this document.
Why it applies: qaqc_disclosed is not true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Stale Data Re-releasenegative
Historical results re-announced with no new assays or reinterpretation — low genuine novelty.
Why it applies: the fact restates a prior release
FI2965Malamute Scandium Prospect · scandiumGrade: 248Grade Unit: ppmIntercept: 4 mHistorical resultNeeds review: historical_restatementView all detailsHide details
Identity
- Hole ID
- FI2965
- Project
- Malamute Scandium Prospect
- Commodity
- scandium
- Region
- australia_nsw
- Reported Region
- australia_nsw
- Ticker
- RIM
Geometry
- Grade
- 248
- Grade Unit
- ppm
- Intercept
- 4 m
- From
- 49 m
- To
- 53 m
- Intercept Depth
- 49 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- FI2965:49-53
Compositing
- Dilution Disclosed
- Yes
Review
- Needs Review
- Yes
- Review Reason
- historical_restatement
- Interp. Status
- scored
- Historical
- Yes
- Historical Source Date
- 2026-03-05T00:00:00.000Z
Dates
- Event date
- 2026-09-30T00:00:00.000Z
Reasoning: This higher-grade sub-interval within a historical intercept further confirms good scandium grades at Malamute, but its re-release limits novelty.
Positive factors
- Higher scandium grade within a moderate interval.
- Confirms known scandium mineralisation.
Negative factors
- This is a re-statement of previous drilling results, reducing novelty.
- No true width disclosed.
Evidence · text
“including 4m @ 248ppm Sc (380ppm Sc Oxide)”
Tags used in scoring
No QA/QC Disclosurenegative
Release does not disclose QA/QC — lab certification, CP/QP sign-off and assay protocols cannot be checked from this document.
Why it applies: qaqc_disclosed is not true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Stale Data Re-releasenegative
Historical results re-announced with no new assays or reinterpretation — low genuine novelty.
Why it applies: the fact restates a prior release
FI2961Malamute Scandium Prospect · scandiumGrade: 177Grade Unit: ppmIntercept: 33 mHistorical resultNeeds review: historical_restatementView all detailsHide details
Identity
- Hole ID
- FI2961
- Project
- Malamute Scandium Prospect
- Commodity
- scandium
- Region
- australia_nsw
- Reported Region
- australia_nsw
- Ticker
- RIM
Geometry
- Grade
- 177
- Grade Unit
- ppm
- Intercept
- 33 m
- From
- 14 m
- To
- 47 m
- Intercept Depth
- 14 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- FI2961:14-47
Compositing
- Dilution Disclosed
- Yes
Review
- Needs Review
- Yes
- Review Reason
- historical_restatement
- Interp. Status
- scored
- Historical
- Yes
- Historical Source Date
- 2026-03-05T00:00:00.000Z
Dates
- Event date
- 2026-09-30T00:00:00.000Z
Reasoning: This historical intercept confirms good scandium grades and widths at Malamute, but its re-release limits novelty.
Positive factors
- Good scandium grade over a significant width.
- Confirms known scandium mineralisation.
Negative factors
- This is a re-statement of previous drilling results, reducing novelty.
- No true width disclosed.
Evidence · text
“33m @ 177ppm Sc (271ppm Sc Oxide) from 14 metres in FI2961”
Tags used in scoring
No QA/QC Disclosurenegative
Release does not disclose QA/QC — lab certification, CP/QP sign-off and assay protocols cannot be checked from this document.
Why it applies: qaqc_disclosed is not true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Stale Data Re-releasenegative
Historical results re-announced with no new assays or reinterpretation — low genuine novelty.
Why it applies: the fact restates a prior release
FI2961Malamute Scandium Prospect · scandiumGrade: 326Grade Unit: ppmIntercept: 9 mHistorical resultNeeds review: historical_restatementView all detailsHide details
Identity
- Hole ID
- FI2961
- Project
- Malamute Scandium Prospect
- Commodity
- scandium
- Region
- australia_nsw
- Reported Region
- australia_nsw
- Ticker
- RIM
Geometry
- Grade
- 326
- Grade Unit
- ppm
- Intercept
- 9 m
- From
- 14 m
- To
- 23 m
- Intercept Depth
- 14 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- FI2961:14-23
Compositing
- Dilution Disclosed
- Yes
Review
- Needs Review
- Yes
- Review Reason
- historical_restatement
- Interp. Status
- scored
- Historical
- Yes
- Historical Source Date
- 2026-03-05T00:00:00.000Z
Dates
- Event date
- 2026-09-30T00:00:00.000Z
Reasoning: This higher-grade sub-interval within a historical intercept further confirms good scandium grades at Malamute, but its re-release limits novelty.
Positive factors
- Higher scandium grade within a moderate interval.
- Confirms known scandium mineralisation.
Negative factors
- This is a re-statement of previous drilling results, reducing novelty.
- No true width disclosed.
Evidence · text
“including 9m @ 326ppm Sc (499ppm Sc Oxide)”
Tags used in scoring
No QA/QC Disclosurenegative
Release does not disclose QA/QC — lab certification, CP/QP sign-off and assay protocols cannot be checked from this document.
Why it applies: qaqc_disclosed is not true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Stale Data Re-releasenegative
Historical results re-announced with no new assays or reinterpretation — low genuine novelty.
Why it applies: the fact restates a prior release
FI2956Malamute Scandium Prospect · scandiumGrade: 175Grade Unit: ppmIntercept: 44 mHistorical resultNeeds review: historical_restatementView all detailsHide details
Identity
- Hole ID
- FI2956
- Project
- Malamute Scandium Prospect
- Commodity
- scandium
- Region
- australia_nsw
- Reported Region
- australia_nsw
- Ticker
- RIM
Geometry
- Grade
- 175
- Grade Unit
- ppm
- Intercept
- 44 m
- From
- 12 m
- To
- 56 m
- Intercept Depth
- 12 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- FI2956:12-56
Compositing
- Dilution Disclosed
- Yes
Review
- Needs Review
- Yes
- Review Reason
- historical_restatement
- Interp. Status
- scored
- Historical
- Yes
- Historical Source Date
- 2026-03-05T00:00:00.000Z
Dates
- Event date
- 2026-09-30T00:00:00.000Z
Reasoning: This historical intercept confirms good scandium grades and widths at Malamute, but its re-release limits novelty.
Positive factors
- Good scandium grade over a significant width.
- Confirms known scandium mineralisation.
Negative factors
- This is a re-statement of previous drilling results, reducing novelty.
- No true width disclosed.
Evidence · text
“44m @ 175ppm Sc (268ppm Sc Oxide) from 12 metres in FI2956”
Tags used in scoring
No QA/QC Disclosurenegative
Release does not disclose QA/QC — lab certification, CP/QP sign-off and assay protocols cannot be checked from this document.
Why it applies: qaqc_disclosed is not true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Stale Data Re-releasenegative
Historical results re-announced with no new assays or reinterpretation — low genuine novelty.
Why it applies: the fact restates a prior release
FI2956Malamute Scandium Prospect · scandiumGrade: 281Grade Unit: ppmIntercept: 12 mHistorical resultNeeds review: historical_restatementView all detailsHide details
Identity
- Hole ID
- FI2956
- Project
- Malamute Scandium Prospect
- Commodity
- scandium
- Region
- australia_nsw
- Reported Region
- australia_nsw
- Ticker
- RIM
Geometry
- Grade
- 281
- Grade Unit
- ppm
- Intercept
- 12 m
- From
- 12 m
- To
- 24 m
- Intercept Depth
- 12 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- FI2956:12-24
Compositing
- Dilution Disclosed
- Yes
Review
- Needs Review
- Yes
- Review Reason
- historical_restatement
- Interp. Status
- scored
- Historical
- Yes
- Historical Source Date
- 2026-03-05T00:00:00.000Z
Dates
- Event date
- 2026-09-30T00:00:00.000Z
Reasoning: This higher-grade sub-interval within a historical intercept further confirms good scandium grades at Malamute, but its re-release limits novelty.
Positive factors
- Higher scandium grade within a significant interval.
- Confirms known scandium mineralisation.
Negative factors
- This is a re-statement of previous drilling results, reducing novelty.
- No true width disclosed.
Evidence · text
“including 12m @ 281ppm Sc (431ppm Sc Oxide)”
Tags used in scoring
No QA/QC Disclosurenegative
Release does not disclose QA/QC — lab certification, CP/QP sign-off and assay protocols cannot be checked from this document.
Why it applies: qaqc_disclosed is not true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Stale Data Re-releasenegative
Historical results re-announced with no new assays or reinterpretation — low genuine novelty.
Why it applies: the fact restates a prior release
FI2957Malamute Scandium Prospect · scandiumGrade: 119Grade Unit: ppmIntercept: 35 mHistorical resultNeeds review: historical_restatementView all detailsHide details
Identity
- Hole ID
- FI2957
- Project
- Malamute Scandium Prospect
- Commodity
- scandium
- Region
- australia_nsw
- Reported Region
- australia_nsw
- Ticker
- RIM
Geometry
- Grade
- 119
- Grade Unit
- ppm
- Intercept
- 35 m
- From
- 34 m
- To
- 69 m
- Intercept Depth
- 34 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- FI2957:34-69
Compositing
- Dilution Disclosed
- Yes
Review
- Needs Review
- Yes
- Review Reason
- historical_restatement
- Interp. Status
- scored
- Historical
- Yes
- Historical Source Date
- 2026-03-05T00:00:00.000Z
Dates
- Event date
- 2026-09-30T00:00:00.000Z
Reasoning: This historical intercept confirms moderate scandium grades and significant widths at Malamute, but its re-release limits novelty.
Positive factors
- Moderate scandium grade over a significant width.
- Confirms known scandium mineralisation.
Negative factors
- This is a re-statement of previous drilling results, reducing novelty.
- No true width disclosed.
Evidence · text
“35m @ 119ppm Sc (183ppm Sc Oxide) from 34 metres in FI2957”
Tags used in scoring
No QA/QC Disclosurenegative
Release does not disclose QA/QC — lab certification, CP/QP sign-off and assay protocols cannot be checked from this document.
Why it applies: qaqc_disclosed is not true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Stale Data Re-releasenegative
Historical results re-announced with no new assays or reinterpretation — low genuine novelty.
Why it applies: the fact restates a prior release
FI2957Malamute Scandium Prospect · scandiumGrade: 167Grade Unit: ppmIntercept: 5 mHistorical resultNeeds review: historical_restatementView all detailsHide details
Identity
- Hole ID
- FI2957
- Project
- Malamute Scandium Prospect
- Commodity
- scandium
- Region
- australia_nsw
- Reported Region
- australia_nsw
- Ticker
- RIM
Geometry
- Grade
- 167
- Grade Unit
- ppm
- Intercept
- 5 m
- From
- 34 m
- To
- 39 m
- Intercept Depth
- 34 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- FI2957:34-39
Compositing
- Dilution Disclosed
- Yes
Review
- Needs Review
- Yes
- Review Reason
- historical_restatement
- Interp. Status
- scored
- Historical
- Yes
- Historical Source Date
- 2026-03-05T00:00:00.000Z
Dates
- Event date
- 2026-09-30T00:00:00.000Z
Reasoning: This higher-grade sub-interval within a historical intercept further confirms good scandium grades at Malamute, but its re-release limits novelty.
Positive factors
- Higher scandium grade within a moderate interval.
- Confirms known scandium mineralisation.
Negative factors
- This is a re-statement of previous drilling results, reducing novelty.
- No true width disclosed.
Evidence · text
“including 5m @ 167ppm Sc (256ppm Sc Oxide)”
Tags used in scoring
No QA/QC Disclosurenegative
Release does not disclose QA/QC — lab certification, CP/QP sign-off and assay protocols cannot be checked from this document.
Why it applies: qaqc_disclosed is not true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Stale Data Re-releasenegative
Historical results re-announced with no new assays or reinterpretation — low genuine novelty.
Why it applies: the fact restates a prior release
MA08Malamute Scandium Prospect · scandiumGrade: 197Grade Unit: ppmIntercept: 9 mHistorical resultNeeds review: historical_restatementView all detailsHide details
Identity
- Hole ID
- MA08
- Project
- Malamute Scandium Prospect
- Commodity
- scandium
- Region
- australia_nsw
- Reported Region
- australia_nsw
- Ticker
- RIM
Geometry
- Grade
- 197
- Grade Unit
- ppm
- Intercept
- 9 m
- From
- 8 m
- To
- 17 m
- Intercept Depth
- 8 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- MA08:8-17
Compositing
- Dilution Disclosed
- Yes
Review
- Needs Review
- Yes
- Review Reason
- historical_restatement
- Interp. Status
- scored
- Historical
- Yes
- Historical Source Date
- 2026-03-05T00:00:00.000Z
Dates
- Event date
- 2026-09-30T00:00:00.000Z
Reasoning: This historical intercept confirms good scandium grades and widths at Malamute, but its re-release limits novelty.
Positive factors
- Good scandium grade over a moderate width.
- Confirms known scandium mineralisation.
Negative factors
- This is a re-statement of previous drilling results, reducing novelty.
- No true width disclosed.
Evidence · text
“9m @ 197ppm Sc (302 ppm Sc Oxide) from 8m in MA08”
Tags used in scoring
No QA/QC Disclosurenegative
Release does not disclose QA/QC — lab certification, CP/QP sign-off and assay protocols cannot be checked from this document.
Why it applies: qaqc_disclosed is not true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Stale Data Re-releasenegative
Historical results re-announced with no new assays or reinterpretation — low genuine novelty.
Why it applies: the fact restates a prior release
MA08Malamute Scandium Prospect · scandiumGrade: 272Grade Unit: ppmIntercept: 3 mHistorical resultNeeds review: historical_restatementView all detailsHide details
Identity
- Hole ID
- MA08
- Project
- Malamute Scandium Prospect
- Commodity
- scandium
- Region
- australia_nsw
- Reported Region
- australia_nsw
- Ticker
- RIM
Geometry
- Grade
- 272
- Grade Unit
- ppm
- Intercept
- 3 m
- From
- 8 m
- To
- 11 m
- Intercept Depth
- 8 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- MA08:8-11
Compositing
- Dilution Disclosed
- Yes
Review
- Needs Review
- Yes
- Review Reason
- historical_restatement
- Interp. Status
- scored
- Historical
- Yes
- Historical Source Date
- 2026-03-05T00:00:00.000Z
Dates
- Event date
- 2026-09-30T00:00:00.000Z
Reasoning: This higher-grade sub-interval within a historical intercept further confirms good scandium grades at Malamute, but its re-release limits novelty.
Positive factors
- Higher scandium grade within a moderate interval.
- Confirms known scandium mineralisation.
Negative factors
- This is a re-statement of previous drilling results, reducing novelty.
- No true width disclosed.
Evidence · text
“including 3m @ 272ppm Sc (417ppm Sc Oxide)”
Tags used in scoring
No QA/QC Disclosurenegative
Release does not disclose QA/QC — lab certification, CP/QP sign-off and assay protocols cannot be checked from this document.
Why it applies: qaqc_disclosed is not true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Stale Data Re-releasenegative
Historical results re-announced with no new assays or reinterpretation — low genuine novelty.
Why it applies: the fact restates a prior release
AK4Windy Ridge Gold Antimony Prospect · goldGrade: 0.48Grade Unit: g/tIntercept: 6 mHistorical resultNeeds review: historical_restatementView all detailsHide details
Identity
- Hole ID
- AK4
- Project
- Windy Ridge Gold Antimony Prospect
- Commodity
- gold
- Region
- australia_nsw
- Reported Region
- australia_nsw
- Ticker
- RIM
Geometry
- Grade
- 0.48
- Grade Unit
- g/t
- Intercept
- 6 m
- From
- 214 m
- To
- 220 m
- Intercept Depth
- 214 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- AK4:214-220
Compositing
- Dilution Disclosed
- Yes
Review
- Needs Review
- Yes
- Review Reason
- historical_restatement
- Interp. Status
- scored
- Historical
- Yes
- Historical Source Date
- 2026-04-24T00:00:00.000Z
Dates
- Event date
- 2026-09-30T00:00:00.000Z
Reasoning: The resampling confirms historical low-grade gold, but its historical nature and low grade limit its impact.
Positive factors
- Confirmation of historical gold mineralisation through resampling.
- QP sign-off on the resampling and analysis.
Negative factors
- Low gold grade.
- This is a re-statement and confirmation of historical data, limiting novelty.
- No true width disclosed.
Evidence · text
“6m @ 0.48g/t gold, 0.65% antimony from 214 metres”
Tags used in scoring
No QA/QC Disclosurenegative
Release does not disclose QA/QC — lab certification, CP/QP sign-off and assay protocols cannot be checked from this document.
Why it applies: qaqc_disclosed is not true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Stale Data Re-releasenegative
Historical results re-announced with no new assays or reinterpretation — low genuine novelty.
Why it applies: the fact restates a prior release
AK4Windy Ridge Gold Antimony Prospect · antimonyGrade: 0.65Grade Unit: %Intercept: 6 mHistorical resultNeeds review: historical_restatementView all detailsHide details
Identity
- Hole ID
- AK4
- Project
- Windy Ridge Gold Antimony Prospect
- Commodity
- antimony
- Region
- australia_nsw
- Reported Region
- australia_nsw
- Ticker
- RIM
Geometry
- Grade
- 0.65
- Grade Unit
- %
- Intercept
- 6 m
- From
- 214 m
- To
- 220 m
- Intercept Depth
- 214 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- AK4:214-220
Compositing
- Dilution Disclosed
- Yes
Review
- Needs Review
- Yes
- Review Reason
- historical_restatement
- Interp. Status
- scored
- Historical
- Yes
- Historical Source Date
- 2026-04-24T00:00:00.000Z
Dates
- Event date
- 2026-09-30T00:00:00.000Z
Reasoning: The resampling reveals new antimony grades in historical core, which is a positive addition to the prospect's polymetallic potential.
Positive factors
- Identification of antimony where not previously assayed, adding new information.
- Good antimony grade.
- Confirmation of historical mineralisation through resampling.
Negative factors
- This is a re-statement and confirmation of historical data, limiting novelty.
- No true width disclosed.
Evidence · text
“6m @ 0.48g/t gold, 0.65% antimony from 214 metres”
Tags used in scoring
No QA/QC Disclosurenegative
Release does not disclose QA/QC — lab certification, CP/QP sign-off and assay protocols cannot be checked from this document.
Why it applies: qaqc_disclosed is not true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Stale Data Re-releasenegative
Historical results re-announced with no new assays or reinterpretation — low genuine novelty.
Why it applies: the fact restates a prior release
AK4Windy Ridge Gold Antimony Prospect · goldGrade: 0.88Grade Unit: g/tIntercept: 1 mHistorical resultNeeds review: historical_restatementView all detailsHide details
Identity
- Hole ID
- AK4
- Project
- Windy Ridge Gold Antimony Prospect
- Commodity
- gold
- Region
- australia_nsw
- Reported Region
- australia_nsw
- Ticker
- RIM
Geometry
- Grade
- 0.88
- Grade Unit
- g/t
- Intercept
- 1 m
- From
- 214 m
- To
- 215 m
- Intercept Depth
- 214 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- AK4:214-215
Compositing
- Dilution Disclosed
- Yes
Review
- Needs Review
- Yes
- Review Reason
- historical_restatement
- Interp. Status
- scored
- Historical
- Yes
- Historical Source Date
- 2026-04-24T00:00:00.000Z
Dates
- Event date
- 2026-09-30T00:00:00.000Z
Reasoning: The resampling confirms historical low-grade gold over a narrow interval, but its historical nature and low grade limit its impact.
Positive factors
- Confirmation of historical gold mineralisation through resampling.
- QP sign-off on the resampling and analysis.
Negative factors
- Low gold grade over a very narrow interval.
- This is a re-statement and confirmation of historical data, limiting novelty.
- No true width disclosed.
Evidence · text
“incl 1m @ 0.88g/t gold, 1.28% antimony”
Tags used in scoring
No QA/QC Disclosurenegative
Release does not disclose QA/QC — lab certification, CP/QP sign-off and assay protocols cannot be checked from this document.
Why it applies: qaqc_disclosed is not true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Stale Data Re-releasenegative
Historical results re-announced with no new assays or reinterpretation — low genuine novelty.
Why it applies: the fact restates a prior release
AK4Windy Ridge Gold Antimony Prospect · antimonyGrade: 1.28Grade Unit: %Intercept: 1 mHistorical resultNeeds review: historical_restatementView all detailsHide details
Identity
- Hole ID
- AK4
- Project
- Windy Ridge Gold Antimony Prospect
- Commodity
- antimony
- Region
- australia_nsw
- Reported Region
- australia_nsw
- Ticker
- RIM
Geometry
- Grade
- 1.28
- Grade Unit
- %
- Intercept
- 1 m
- From
- 214 m
- To
- 215 m
- Intercept Depth
- 214 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- AK4:214-215
Compositing
- Dilution Disclosed
- Yes
Review
- Needs Review
- Yes
- Review Reason
- historical_restatement
- Interp. Status
- scored
- Historical
- Yes
- Historical Source Date
- 2026-04-24T00:00:00.000Z
Dates
- Event date
- 2026-09-30T00:00:00.000Z
Reasoning: The resampling reveals new antimony grades in historical core, which is a positive addition to the prospect's polymetallic potential.
Positive factors
- Identification of antimony where not previously assayed, adding new information.
- Good antimony grade over a narrow interval.
- Confirmation of historical mineralisation through resampling.
Negative factors
- This is a re-statement and confirmation of historical data, limiting novelty.
- No true width disclosed.
Evidence · text
“incl 1m @ 0.88g/t gold, 1.28% antimony”
Tags used in scoring
No QA/QC Disclosurenegative
Release does not disclose QA/QC — lab certification, CP/QP sign-off and assay protocols cannot be checked from this document.
Why it applies: qaqc_disclosed is not true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Stale Data Re-releasenegative
Historical results re-announced with no new assays or reinterpretation — low genuine novelty.
Why it applies: the fact restates a prior release
AK4Windy Ridge Gold Antimony Prospect · goldGrade: 0.58Grade Unit: g/tIntercept: 8 mHistorical resultNeeds review: historical_restatementView all detailsHide details
Identity
- Hole ID
- AK4
- Project
- Windy Ridge Gold Antimony Prospect
- Commodity
- gold
- Region
- australia_nsw
- Reported Region
- australia_nsw
- Ticker
- RIM
Geometry
- Grade
- 0.58
- Grade Unit
- g/t
- Intercept
- 8 m
- From
- 235 m
- To
- 243 m
- Intercept Depth
- 235 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- AK4:235-243
Compositing
- Dilution Disclosed
- Yes
Review
- Needs Review
- Yes
- Review Reason
- historical_restatement
- Interp. Status
- scored
- Historical
- Yes
- Historical Source Date
- 2026-04-24T00:00:00.000Z
Dates
- Event date
- 2026-09-30T00:00:00.000Z
Reasoning: The resampling confirms historical low-grade gold, but its historical nature and low grade limit its impact.
Positive factors
- Confirmation of historical gold mineralisation through resampling.
- QP sign-off on the resampling and analysis.
Negative factors
- Low gold grade.
- This is a re-statement and confirmation of historical data, limiting novelty.
- No true width disclosed.
Evidence · text
“8m @ 0.58g/t gold, 0.13% antimony from 235 metres”
Tags used in scoring
No QA/QC Disclosurenegative
Release does not disclose QA/QC — lab certification, CP/QP sign-off and assay protocols cannot be checked from this document.
Why it applies: qaqc_disclosed is not true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Stale Data Re-releasenegative
Historical results re-announced with no new assays or reinterpretation — low genuine novelty.
Why it applies: the fact restates a prior release
AK4Windy Ridge Gold Antimony Prospect · antimonyGrade: 0.13Grade Unit: %Intercept: 8 mHistorical resultNeeds review: historical_restatementView all detailsHide details
Identity
- Hole ID
- AK4
- Project
- Windy Ridge Gold Antimony Prospect
- Commodity
- antimony
- Region
- australia_nsw
- Reported Region
- australia_nsw
- Ticker
- RIM
Geometry
- Grade
- 0.13
- Grade Unit
- %
- Intercept
- 8 m
- From
- 235 m
- To
- 243 m
- Intercept Depth
- 235 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- AK4:235-243
Compositing
- Dilution Disclosed
- Yes
Review
- Needs Review
- Yes
- Review Reason
- historical_restatement
- Interp. Status
- scored
- Historical
- Yes
- Historical Source Date
- 2026-04-24T00:00:00.000Z
Dates
- Event date
- 2026-09-30T00:00:00.000Z
Reasoning: The resampling reveals new low-grade antimony in historical core, which is a positive addition to the prospect's polymetallic potential.
Positive factors
- Identification of antimony where not previously assayed, adding new information.
- Confirmation of historical mineralisation through resampling.
Negative factors
- Low antimony grade.
- This is a re-statement and confirmation of historical data, limiting novelty.
- No true width disclosed.
Evidence · text
“8m @ 0.58g/t gold, 0.13% antimony from 235 metres”
Tags used in scoring
No QA/QC Disclosurenegative
Release does not disclose QA/QC — lab certification, CP/QP sign-off and assay protocols cannot be checked from this document.
Why it applies: qaqc_disclosed is not true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Stale Data Re-releasenegative
Historical results re-announced with no new assays or reinterpretation — low genuine novelty.
Why it applies: the fact restates a prior release
AK4Windy Ridge Gold Antimony Prospect · goldGrade: 1.07Grade Unit: g/tIntercept: 1 mHistorical resultNeeds review: historical_restatementView all detailsHide details
Identity
- Hole ID
- AK4
- Project
- Windy Ridge Gold Antimony Prospect
- Commodity
- gold
- Region
- australia_nsw
- Reported Region
- australia_nsw
- Ticker
- RIM
Geometry
- Grade
- 1.07
- Grade Unit
- g/t
- Intercept
- 1 m
- From
- 235 m
- To
- 236 m
- Intercept Depth
- 235 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- AK4:235-236
Compositing
- Dilution Disclosed
- Yes
Review
- Needs Review
- Yes
- Review Reason
- historical_restatement
- Interp. Status
- scored
- Historical
- Yes
- Historical Source Date
- 2026-04-24T00:00:00.000Z
Dates
- Event date
- 2026-09-30T00:00:00.000Z
Reasoning: The resampling confirms historical low-grade gold over a narrow interval, but its historical nature and low grade limit its impact.
Positive factors
- Confirmation of historical gold mineralisation through resampling.
- QP sign-off on the resampling and analysis.
Negative factors
- Low gold grade over a very narrow interval.
- This is a re-statement and confirmation of historical data, limiting novelty.
- No true width disclosed.
Evidence · text
“incl 1m @ 1.07g/t gold, 0.09% antimony”
Tags used in scoring
No QA/QC Disclosurenegative
Release does not disclose QA/QC — lab certification, CP/QP sign-off and assay protocols cannot be checked from this document.
Why it applies: qaqc_disclosed is not true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Stale Data Re-releasenegative
Historical results re-announced with no new assays or reinterpretation — low genuine novelty.
Why it applies: the fact restates a prior release
AK4Windy Ridge Gold Antimony Prospect · antimonyGrade: 0.09Grade Unit: %Intercept: 1 mHistorical resultNeeds review: historical_restatementView all detailsHide details
Identity
- Hole ID
- AK4
- Project
- Windy Ridge Gold Antimony Prospect
- Commodity
- antimony
- Region
- australia_nsw
- Reported Region
- australia_nsw
- Ticker
- RIM
Geometry
- Grade
- 0.09
- Grade Unit
- %
- Intercept
- 1 m
- From
- 235 m
- To
- 236 m
- Intercept Depth
- 235 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- AK4:235-236
Compositing
- Dilution Disclosed
- Yes
Review
- Needs Review
- Yes
- Review Reason
- historical_restatement
- Interp. Status
- scored
- Historical
- Yes
- Historical Source Date
- 2026-04-24T00:00:00.000Z
Dates
- Event date
- 2026-09-30T00:00:00.000Z
Reasoning: The resampling reveals new low-grade antimony in historical core, which is a positive addition to the prospect's polymetallic potential.
Positive factors
- Identification of antimony where not previously assayed, adding new information.
- Confirmation of historical mineralisation through resampling.
Negative factors
- Low antimony grade over a very narrow interval.
- This is a re-statement and confirmation of historical data, limiting novelty.
- No true width disclosed.
Evidence · text
“incl 1m @ 1.07g/t gold, 0.09% antimony”
Tags used in scoring
No QA/QC Disclosurenegative
Release does not disclose QA/QC — lab certification, CP/QP sign-off and assay protocols cannot be checked from this document.
Why it applies: qaqc_disclosed is not true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Stale Data Re-releasenegative
Historical results re-announced with no new assays or reinterpretation — low genuine novelty.
Why it applies: the fact restates a prior release
AK4Windy Ridge Gold Antimony Prospect · goldGrade: 0.68Grade Unit: g/tIntercept: 7 mHistorical resultNeeds review: historical_restatementView all detailsHide details
Identity
- Hole ID
- AK4
- Project
- Windy Ridge Gold Antimony Prospect
- Commodity
- gold
- Region
- australia_nsw
- Reported Region
- australia_nsw
- Ticker
- RIM
Geometry
- Grade
- 0.68
- Grade Unit
- g/t
- Intercept
- 7 m
- From
- 254 m
- To
- 261 m
- Intercept Depth
- 254 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- AK4:254-261
Compositing
- Dilution Disclosed
- Yes
Review
- Needs Review
- Yes
- Review Reason
- historical_restatement
- Interp. Status
- scored
- Historical
- Yes
- Historical Source Date
- 2026-04-24T00:00:00.000Z
Dates
- Event date
- 2026-09-30T00:00:00.000Z
Reasoning: The resampling confirms historical low-grade gold, but its historical nature and low grade limit its impact.
Positive factors
- Confirmation of historical gold mineralisation through resampling.
- QP sign-off on the resampling and analysis.
Negative factors
- Low gold grade.
- This is a re-statement and confirmation of historical data, limiting novelty.
- No true width disclosed.
Evidence · text
“7m @ 0.68g/t gold, 0.35% antimony from 254 metres”
Tags used in scoring
No QA/QC Disclosurenegative
Release does not disclose QA/QC — lab certification, CP/QP sign-off and assay protocols cannot be checked from this document.
Why it applies: qaqc_disclosed is not true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Stale Data Re-releasenegative
Historical results re-announced with no new assays or reinterpretation — low genuine novelty.
Why it applies: the fact restates a prior release
AK4Windy Ridge Gold Antimony Prospect · antimonyGrade: 0.35Grade Unit: %Intercept: 7 mHistorical resultNeeds review: historical_restatementView all detailsHide details
Identity
- Hole ID
- AK4
- Project
- Windy Ridge Gold Antimony Prospect
- Commodity
- antimony
- Region
- australia_nsw
- Reported Region
- australia_nsw
- Ticker
- RIM
Geometry
- Grade
- 0.35
- Grade Unit
- %
- Intercept
- 7 m
- From
- 254 m
- To
- 261 m
- Intercept Depth
- 254 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- AK4:254-261
Compositing
- Dilution Disclosed
- Yes
Review
- Needs Review
- Yes
- Review Reason
- historical_restatement
- Interp. Status
- scored
- Historical
- Yes
- Historical Source Date
- 2026-04-24T00:00:00.000Z
Dates
- Event date
- 2026-09-30T00:00:00.000Z
Reasoning: The resampling reveals new antimony grades in historical core, which is a positive addition to the prospect's polymetallic potential.
Positive factors
- Identification of antimony where not previously assayed, adding new information.
- Confirmation of historical mineralisation through resampling.
Negative factors
- This is a re-statement and confirmation of historical data, limiting novelty.
- No true width disclosed.
Evidence · text
“7m @ 0.68g/t gold, 0.35% antimony from 254 metres”
Tags used in scoring
No QA/QC Disclosurenegative
Release does not disclose QA/QC — lab certification, CP/QP sign-off and assay protocols cannot be checked from this document.
Why it applies: qaqc_disclosed is not true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Stale Data Re-releasenegative
Historical results re-announced with no new assays or reinterpretation — low genuine novelty.
Why it applies: the fact restates a prior release
AK4Windy Ridge Gold Antimony Prospect · goldGrade: 1.03Grade Unit: g/tIntercept: 1 mHistorical resultNeeds review: historical_restatementView all detailsHide details
Identity
- Hole ID
- AK4
- Project
- Windy Ridge Gold Antimony Prospect
- Commodity
- gold
- Region
- australia_nsw
- Reported Region
- australia_nsw
- Ticker
- RIM
Geometry
- Grade
- 1.03
- Grade Unit
- g/t
- Intercept
- 1 m
- From
- 254 m
- To
- 255 m
- Intercept Depth
- 254 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- AK4:254-255
Compositing
- Dilution Disclosed
- Yes
Review
- Needs Review
- Yes
- Review Reason
- historical_restatement
- Interp. Status
- scored
- Historical
- Yes
- Historical Source Date
- 2026-04-24T00:00:00.000Z
Dates
- Event date
- 2026-09-30T00:00:00.000Z
Reasoning: The resampling confirms historical low-grade gold over a narrow interval, but its historical nature and low grade limit its impact.
Positive factors
- Confirmation of historical gold mineralisation through resampling.
- QP sign-off on the resampling and analysis.
Negative factors
- Low gold grade over a very narrow interval.
- This is a re-statement and confirmation of historical data, limiting novelty.
- No true width disclosed.
Evidence · text
“incl 1m @ 1.03g/t gold, 0.86% antimony”
Tags used in scoring
No QA/QC Disclosurenegative
Release does not disclose QA/QC — lab certification, CP/QP sign-off and assay protocols cannot be checked from this document.
Why it applies: qaqc_disclosed is not true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Stale Data Re-releasenegative
Historical results re-announced with no new assays or reinterpretation — low genuine novelty.
Why it applies: the fact restates a prior release
AK4Windy Ridge Gold Antimony Prospect · antimonyGrade: 0.86Grade Unit: %Intercept: 1 mHistorical resultNeeds review: historical_restatementView all detailsHide details
Identity
- Hole ID
- AK4
- Project
- Windy Ridge Gold Antimony Prospect
- Commodity
- antimony
- Region
- australia_nsw
- Reported Region
- australia_nsw
- Ticker
- RIM
Geometry
- Grade
- 0.86
- Grade Unit
- %
- Intercept
- 1 m
- From
- 254 m
- To
- 255 m
- Intercept Depth
- 254 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- AK4:254-255
Compositing
- Dilution Disclosed
- Yes
Review
- Needs Review
- Yes
- Review Reason
- historical_restatement
- Interp. Status
- scored
- Historical
- Yes
- Historical Source Date
- 2026-04-24T00:00:00.000Z
Dates
- Event date
- 2026-09-30T00:00:00.000Z
Reasoning: The resampling reveals new antimony grades in historical core, which is a positive addition to the prospect's polymetallic potential.
Positive factors
- Identification of antimony where not previously assayed, adding new information.
- Good antimony grade over a narrow interval.
- Confirmation of historical mineralisation through resampling.
Negative factors
- This is a re-statement and confirmation of historical data, limiting novelty.
- No true width disclosed.
Evidence · text
“incl 1m @ 1.03g/t gold, 0.86% antimony”
Tags used in scoring
No QA/QC Disclosurenegative
Release does not disclose QA/QC — lab certification, CP/QP sign-off and assay protocols cannot be checked from this document.
Why it applies: qaqc_disclosed is not true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Stale Data Re-releasenegative
Historical results re-announced with no new assays or reinterpretation — low genuine novelty.
Why it applies: the fact restates a prior release
NPD-D1Windy Ridge Gold Antimony Prospect · goldGrade: 0.61Grade Unit: g/tIntercept: 3 mHistorical resultNeeds review: historical_restatementView all detailsHide details
Identity
- Hole ID
- NPD-D1
- Project
- Windy Ridge Gold Antimony Prospect
- Commodity
- gold
- Region
- australia_nsw
- Reported Region
- australia_nsw
- Ticker
- RIM
Geometry
- Grade
- 0.61
- Grade Unit
- g/t
- Intercept
- 3 m
- From
- 84 m
- To
- 87 m
- Intercept Depth
- 84 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- NPD-D1:84-87
Compositing
- Dilution Disclosed
- Yes
Review
- Needs Review
- Yes
- Review Reason
- historical_restatement
- Interp. Status
- scored
- Historical
- Yes
- Historical Source Date
- 2026-04-24T00:00:00.000Z
Dates
- Event date
- 2026-09-30T00:00:00.000Z
Reasoning: The resampling confirms historical low-grade gold, but its historical nature and low grade limit its impact.
Positive factors
- Confirmation of historical gold mineralisation through resampling.
- QP sign-off on the resampling and analysis.
Negative factors
- Low gold grade.
- This is a re-statement and confirmation of historical data, limiting novelty.
- No true width disclosed.
Evidence · text
“3m @ 0.61g/t gold, 0.01% antimony, 10.1g/t silver, 0.38% lead, and 1.06% zinc from 84 metres”
Tags used in scoring
No QA/QC Disclosurenegative
Release does not disclose QA/QC — lab certification, CP/QP sign-off and assay protocols cannot be checked from this document.
Why it applies: qaqc_disclosed is not true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Stale Data Re-releasenegative
Historical results re-announced with no new assays or reinterpretation — low genuine novelty.
Why it applies: the fact restates a prior release
NPD-D1Windy Ridge Gold Antimony Prospect · antimonyGrade: 0.01Grade Unit: %Intercept: 3 mHistorical resultNeeds review: historical_restatementView all detailsHide details
Identity
- Hole ID
- NPD-D1
- Project
- Windy Ridge Gold Antimony Prospect
- Commodity
- antimony
- Region
- australia_nsw
- Reported Region
- australia_nsw
- Ticker
- RIM
Geometry
- Grade
- 0.01
- Grade Unit
- %
- Intercept
- 3 m
- From
- 84 m
- To
- 87 m
- Intercept Depth
- 84 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- NPD-D1:84-87
Compositing
- Dilution Disclosed
- Yes
Review
- Needs Review
- Yes
- Review Reason
- historical_restatement
- Interp. Status
- scored
- Historical
- Yes
- Historical Source Date
- 2026-04-24T00:00:00.000Z
Dates
- Event date
- 2026-09-30T00:00:00.000Z
Reasoning: The resampling reveals new very low-grade antimony in historical core, which is a minor addition to the prospect's polymetallic potential.
Positive factors
- Identification of antimony where not previously assayed, adding new information.
- Confirmation of historical mineralisation through resampling.
Negative factors
- Very low antimony grade.
- This is a re-statement and confirmation of historical data, limiting novelty.
- No true width disclosed.
Evidence · text
“3m @ 0.61g/t gold, 0.01% antimony, 10.1g/t silver, 0.38% lead, and 1.06% zinc from 84 metres”
Tags used in scoring
No QA/QC Disclosurenegative
Release does not disclose QA/QC — lab certification, CP/QP sign-off and assay protocols cannot be checked from this document.
Why it applies: qaqc_disclosed is not true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Stale Data Re-releasenegative
Historical results re-announced with no new assays or reinterpretation — low genuine novelty.
Why it applies: the fact restates a prior release
NPD-D1Windy Ridge Gold Antimony Prospect · silverGrade: 10.1Grade Unit: g/tIntercept: 3 mHistorical resultNeeds review: historical_restatementView all detailsHide details
Identity
- Hole ID
- NPD-D1
- Project
- Windy Ridge Gold Antimony Prospect
- Commodity
- silver
- Region
- australia_nsw
- Reported Region
- australia_nsw
- Ticker
- RIM
Geometry
- Grade
- 10.1
- Grade Unit
- g/t
- Intercept
- 3 m
- From
- 84 m
- To
- 87 m
- Intercept Depth
- 84 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- NPD-D1:84-87
Compositing
- Dilution Disclosed
- Yes
Review
- Needs Review
- Yes
- Review Reason
- historical_restatement
- Interp. Status
- scored
- Historical
- Yes
- Historical Source Date
- 2026-04-24T00:00:00.000Z
Dates
- Event date
- 2026-09-30T00:00:00.000Z
Reasoning: The resampling reveals new low-grade silver in historical core, which is a minor addition to the prospect's polymetallic potential.
Positive factors
- Identification of silver where not previously assayed, adding new information.
- Confirmation of historical mineralisation through resampling.
Negative factors
- Low silver grade.
- This is a re-statement and confirmation of historical data, limiting novelty.
- No true width disclosed.
Evidence · text
“3m @ 0.61g/t gold, 0.01% antimony, 10.1g/t silver, 0.38% lead, and 1.06% zinc from 84 metres”
Tags used in scoring
No QA/QC Disclosurenegative
Release does not disclose QA/QC — lab certification, CP/QP sign-off and assay protocols cannot be checked from this document.
Why it applies: qaqc_disclosed is not true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Stale Data Re-releasenegative
Historical results re-announced with no new assays or reinterpretation — low genuine novelty.
Why it applies: the fact restates a prior release
NPD-D1Windy Ridge Gold Antimony Prospect · leadGrade: 0.38Grade Unit: %Intercept: 3 mHistorical resultNeeds review: historical_restatementView all detailsHide details
Identity
- Hole ID
- NPD-D1
- Project
- Windy Ridge Gold Antimony Prospect
- Commodity
- lead
- Region
- australia_nsw
- Reported Region
- australia_nsw
- Ticker
- RIM
Geometry
- Grade
- 0.38
- Grade Unit
- %
- Intercept
- 3 m
- From
- 84 m
- To
- 87 m
- Intercept Depth
- 84 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- NPD-D1:84-87
Compositing
- Dilution Disclosed
- Yes
Review
- Needs Review
- Yes
- Review Reason
- historical_restatement
- Interp. Status
- scored
- Historical
- Yes
- Historical Source Date
- 2026-04-24T00:00:00.000Z
Dates
- Event date
- 2026-09-30T00:00:00.000Z
Reasoning: The resampling reveals new low-grade lead in historical core, which is a minor addition to the prospect's polymetallic potential.
Positive factors
- Identification of lead where not previously assayed, adding new information.
- Confirmation of historical mineralisation through resampling.
Negative factors
- Low lead grade.
- This is a re-statement and confirmation of historical data, limiting novelty.
- No true width disclosed.
Evidence · text
“3m @ 0.61g/t gold, 0.01% antimony, 10.1g/t silver, 0.38% lead, and 1.06% zinc from 84 metres”
Tags used in scoring
No QA/QC Disclosurenegative
Release does not disclose QA/QC — lab certification, CP/QP sign-off and assay protocols cannot be checked from this document.
Why it applies: qaqc_disclosed is not true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Stale Data Re-releasenegative
Historical results re-announced with no new assays or reinterpretation — low genuine novelty.
Why it applies: the fact restates a prior release
NPD-D1Windy Ridge Gold Antimony Prospect · zincGrade: 1.06Grade Unit: %Intercept: 3 mHistorical resultNeeds review: historical_restatementView all detailsHide details
Identity
- Hole ID
- NPD-D1
- Project
- Windy Ridge Gold Antimony Prospect
- Commodity
- zinc
- Region
- australia_nsw
- Reported Region
- australia_nsw
- Ticker
- RIM
Geometry
- Grade
- 1.06
- Grade Unit
- %
- Intercept
- 3 m
- From
- 84 m
- To
- 87 m
- Intercept Depth
- 84 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- NPD-D1:84-87
Compositing
- Dilution Disclosed
- Yes
Review
- Needs Review
- Yes
- Review Reason
- historical_restatement
- Interp. Status
- scored
- Historical
- Yes
- Historical Source Date
- 2026-04-24T00:00:00.000Z
Dates
- Event date
- 2026-09-30T00:00:00.000Z
Reasoning: The resampling reveals new low-grade zinc in historical core, which is a minor addition to the prospect's polymetallic potential.
Positive factors
- Identification of zinc where not previously assayed, adding new information.
- Confirmation of historical mineralisation through resampling.
Negative factors
- Low zinc grade.
- This is a re-statement and confirmation of historical data, limiting novelty.
- No true width disclosed.
Evidence · text
“3m @ 0.61g/t gold, 0.01% antimony, 10.1g/t silver, 0.38% lead, and 1.06% zinc from 84 metres”
Tags used in scoring
No QA/QC Disclosurenegative
Release does not disclose QA/QC — lab certification, CP/QP sign-off and assay protocols cannot be checked from this document.
Why it applies: qaqc_disclosed is not true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Stale Data Re-releasenegative
Historical results re-announced with no new assays or reinterpretation — low genuine novelty.
Why it applies: the fact restates a prior release
NPD-D1Windy Ridge Gold Antimony Prospect · goldGrade: 0.92Grade Unit: g/tIntercept: 1 mHistorical resultNeeds review: historical_restatementView all detailsHide details
Identity
- Hole ID
- NPD-D1
- Project
- Windy Ridge Gold Antimony Prospect
- Commodity
- gold
- Region
- australia_nsw
- Reported Region
- australia_nsw
- Ticker
- RIM
Geometry
- Grade
- 0.92
- Grade Unit
- g/t
- Intercept
- 1 m
- From
- 84 m
- To
- 85 m
- Intercept Depth
- 84 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- NPD-D1:84-85
Compositing
- Dilution Disclosed
- Yes
Review
- Needs Review
- Yes
- Review Reason
- historical_restatement
- Interp. Status
- scored
- Historical
- Yes
- Historical Source Date
- 2026-04-24T00:00:00.000Z
Dates
- Event date
- 2026-09-30T00:00:00.000Z
Reasoning: The resampling confirms historical low-grade gold over a narrow interval, but its historical nature and low grade limit its impact.
Positive factors
- Confirmation of historical gold mineralisation through resampling.
- QP sign-off on the resampling and analysis.
Negative factors
- Low gold grade over a very narrow interval.
- This is a re-statement and confirmation of historical data, limiting novelty.
- No true width disclosed.
Evidence · text
“incl 1m @ 0.92g/t gold, 0.01% antimony, 17.2g/t silver, 0.52% lead, and 2.56% zinc”
Tags used in scoring
No QA/QC Disclosurenegative
Release does not disclose QA/QC — lab certification, CP/QP sign-off and assay protocols cannot be checked from this document.
Why it applies: qaqc_disclosed is not true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Stale Data Re-releasenegative
Historical results re-announced with no new assays or reinterpretation — low genuine novelty.
Why it applies: the fact restates a prior release
NPD-D1Windy Ridge Gold Antimony Prospect · antimonyGrade: 0.01Grade Unit: %Intercept: 1 mHistorical resultNeeds review: historical_restatementView all detailsHide details
Identity
- Hole ID
- NPD-D1
- Project
- Windy Ridge Gold Antimony Prospect
- Commodity
- antimony
- Region
- australia_nsw
- Reported Region
- australia_nsw
- Ticker
- RIM
Geometry
- Grade
- 0.01
- Grade Unit
- %
- Intercept
- 1 m
- From
- 84 m
- To
- 85 m
- Intercept Depth
- 84 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- NPD-D1:84-85
Compositing
- Dilution Disclosed
- Yes
Review
- Needs Review
- Yes
- Review Reason
- historical_restatement
- Interp. Status
- scored
- Historical
- Yes
- Historical Source Date
- 2026-04-24T00:00:00.000Z
Dates
- Event date
- 2026-09-30T00:00:00.000Z
Reasoning: The resampling reveals new very low-grade antimony in historical core, which is a minor addition to the prospect's polymetallic potential.
Positive factors
- Identification of antimony where not previously assayed, adding new information.
- Confirmation of historical mineralisation through resampling.
Negative factors
- Very low antimony grade over a very narrow interval.
- This is a re-statement and confirmation of historical data, limiting novelty.
- No true width disclosed.
Evidence · text
“incl 1m @ 0.92g/t gold, 0.01% antimony, 17.2g/t silver, 0.52% lead, and 2.56% zinc”
Tags used in scoring
No QA/QC Disclosurenegative
Release does not disclose QA/QC — lab certification, CP/QP sign-off and assay protocols cannot be checked from this document.
Why it applies: qaqc_disclosed is not true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Stale Data Re-releasenegative
Historical results re-announced with no new assays or reinterpretation — low genuine novelty.
Why it applies: the fact restates a prior release
NPD-D1Windy Ridge Gold Antimony Prospect · silverGrade: 17.2Grade Unit: g/tIntercept: 1 mHistorical resultNeeds review: historical_restatementView all detailsHide details
Identity
- Hole ID
- NPD-D1
- Project
- Windy Ridge Gold Antimony Prospect
- Commodity
- silver
- Region
- australia_nsw
- Reported Region
- australia_nsw
- Ticker
- RIM
Geometry
- Grade
- 17.2
- Grade Unit
- g/t
- Intercept
- 1 m
- From
- 84 m
- To
- 85 m
- Intercept Depth
- 84 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- NPD-D1:84-85
Compositing
- Dilution Disclosed
- Yes
Review
- Needs Review
- Yes
- Review Reason
- historical_restatement
- Interp. Status
- scored
- Historical
- Yes
- Historical Source Date
- 2026-04-24T00:00:00.000Z
Dates
- Event date
- 2026-09-30T00:00:00.000Z
Reasoning: The resampling reveals new low-grade silver in historical core, which is a minor addition to the prospect's polymetallic potential.
Positive factors
- Identification of silver where not previously assayed, adding new information.
- Confirmation of historical mineralisation through resampling.
Negative factors
- Low silver grade over a very narrow interval.
- This is a re-statement and confirmation of historical data, limiting novelty.
- No true width disclosed.
Evidence · text
“incl 1m @ 0.92g/t gold, 0.01% antimony, 17.2g/t silver, 0.52% lead, and 2.56% zinc”
Tags used in scoring
No QA/QC Disclosurenegative
Release does not disclose QA/QC — lab certification, CP/QP sign-off and assay protocols cannot be checked from this document.
Why it applies: qaqc_disclosed is not true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Stale Data Re-releasenegative
Historical results re-announced with no new assays or reinterpretation — low genuine novelty.
Why it applies: the fact restates a prior release
NPD-D1Windy Ridge Gold Antimony Prospect · leadGrade: 0.52Grade Unit: %Intercept: 1 mHistorical resultNeeds review: historical_restatementView all detailsHide details
Identity
- Hole ID
- NPD-D1
- Project
- Windy Ridge Gold Antimony Prospect
- Commodity
- lead
- Region
- australia_nsw
- Reported Region
- australia_nsw
- Ticker
- RIM
Geometry
- Grade
- 0.52
- Grade Unit
- %
- Intercept
- 1 m
- From
- 84 m
- To
- 85 m
- Intercept Depth
- 84 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- NPD-D1:84-85
Compositing
- Dilution Disclosed
- Yes
Review
- Needs Review
- Yes
- Review Reason
- historical_restatement
- Interp. Status
- scored
- Historical
- Yes
- Historical Source Date
- 2026-04-24T00:00:00.000Z
Dates
- Event date
- 2026-09-30T00:00:00.000Z
Reasoning: The resampling reveals new low-grade lead in historical core, which is a minor addition to the prospect's polymetallic potential.
Positive factors
- Identification of lead where not previously assayed, adding new information.
- Confirmation of historical mineralisation through resampling.
Negative factors
- Low lead grade over a very narrow interval.
- This is a re-statement and confirmation of historical data, limiting novelty.
- No true width disclosed.
Evidence · text
“incl 1m @ 0.92g/t gold, 0.01% antimony, 17.2g/t silver, 0.52% lead, and 2.56% zinc”
Tags used in scoring
No QA/QC Disclosurenegative
Release does not disclose QA/QC — lab certification, CP/QP sign-off and assay protocols cannot be checked from this document.
Why it applies: qaqc_disclosed is not true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Stale Data Re-releasenegative
Historical results re-announced with no new assays or reinterpretation — low genuine novelty.
Why it applies: the fact restates a prior release
NPD-D1Windy Ridge Gold Antimony Prospect · zincGrade: 2.56Grade Unit: %Intercept: 1 mHistorical resultNeeds review: historical_restatementView all detailsHide details
Identity
- Hole ID
- NPD-D1
- Project
- Windy Ridge Gold Antimony Prospect
- Commodity
- zinc
- Region
- australia_nsw
- Reported Region
- australia_nsw
- Ticker
- RIM
Geometry
- Grade
- 2.56
- Grade Unit
- %
- Intercept
- 1 m
- From
- 84 m
- To
- 85 m
- Intercept Depth
- 84 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- NPD-D1:84-85
Compositing
- Dilution Disclosed
- Yes
Review
- Needs Review
- Yes
- Review Reason
- historical_restatement
- Interp. Status
- scored
- Historical
- Yes
- Historical Source Date
- 2026-04-24T00:00:00.000Z
Dates
- Event date
- 2026-09-30T00:00:00.000Z
Reasoning: The resampling reveals new low-grade zinc in historical core, which is a minor addition to the prospect's polymetallic potential.
Positive factors
- Identification of zinc where not previously assayed, adding new information.
- Confirmation of historical mineralisation through resampling.
Negative factors
- Low zinc grade over a very narrow interval.
- This is a re-statement and confirmation of historical data, limiting novelty.
- No true width disclosed.
Evidence · text
“incl 1m @ 0.92g/t gold, 0.01% antimony, 17.2g/t silver, 0.52% lead, and 2.56% zinc”
Tags used in scoring
No QA/QC Disclosurenegative
Release does not disclose QA/QC — lab certification, CP/QP sign-off and assay protocols cannot be checked from this document.
Why it applies: qaqc_disclosed is not true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Stale Data Re-releasenegative
Historical results re-announced with no new assays or reinterpretation — low genuine novelty.
Why it applies: the fact restates a prior release
NPD-D1Windy Ridge Gold Antimony Prospect · goldGrade: 0.86Grade Unit: g/tIntercept: 5.4 mHistorical resultNeeds review: historical_restatementView all detailsHide details
Identity
- Hole ID
- NPD-D1
- Project
- Windy Ridge Gold Antimony Prospect
- Commodity
- gold
- Region
- australia_nsw
- Reported Region
- australia_nsw
- Ticker
- RIM
Geometry
- Grade
- 0.86
- Grade Unit
- g/t
- Intercept
- 5.4 m
- From
- 189 m
- To
- 194.4 m
- Intercept Depth
- 189 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- NPD-D1:189-194.4
Compositing
- Dilution Disclosed
- Yes
Review
- Needs Review
- Yes
- Review Reason
- historical_restatement
- Interp. Status
- scored
- Historical
- Yes
- Historical Source Date
- 2026-04-24T00:00:00.000Z
Dates
- Event date
- 2026-09-30T00:00:00.000Z
Reasoning: The resampling confirms historical low-grade gold, but its historical nature and low grade limit its impact.
Positive factors
- Confirmation of historical gold mineralisation through resampling.
- QP sign-off on the resampling and analysis.
Negative factors
- Low gold grade.
- This is a re-statement and confirmation of historical data, limiting novelty.
- No true width disclosed.
Evidence · text
“5.4m @ 0.86g/t gold, 0.30% antimony from 189.0 metres”
Tags used in scoring
No QA/QC Disclosurenegative
Release does not disclose QA/QC — lab certification, CP/QP sign-off and assay protocols cannot be checked from this document.
Why it applies: qaqc_disclosed is not true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Stale Data Re-releasenegative
Historical results re-announced with no new assays or reinterpretation — low genuine novelty.
Why it applies: the fact restates a prior release
NPD-D1Windy Ridge Gold Antimony Prospect · antimonyGrade: 0.3Grade Unit: %Intercept: 5.4 mHistorical resultNeeds review: historical_restatementView all detailsHide details
Identity
- Hole ID
- NPD-D1
- Project
- Windy Ridge Gold Antimony Prospect
- Commodity
- antimony
- Region
- australia_nsw
- Reported Region
- australia_nsw
- Ticker
- RIM
Geometry
- Grade
- 0.3
- Grade Unit
- %
- Intercept
- 5.4 m
- From
- 189 m
- To
- 194.4 m
- Intercept Depth
- 189 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- NPD-D1:189-194.4
Compositing
- Dilution Disclosed
- Yes
Review
- Needs Review
- Yes
- Review Reason
- historical_restatement
- Interp. Status
- scored
- Historical
- Yes
- Historical Source Date
- 2026-04-24T00:00:00.000Z
Dates
- Event date
- 2026-09-30T00:00:00.000Z
Reasoning: The resampling reveals new low-grade antimony in historical core, which is a positive addition to the prospect's polymetallic potential.
Positive factors
- Identification of antimony where not previously assayed, adding new information.
- Confirmation of historical mineralisation through resampling.
Negative factors
- Low antimony grade.
- This is a re-statement and confirmation of historical data, limiting novelty.
- No true width disclosed.
Evidence · text
“5.4m @ 0.86g/t gold, 0.30% antimony from 189.0 metres”
Tags used in scoring
No QA/QC Disclosurenegative
Release does not disclose QA/QC — lab certification, CP/QP sign-off and assay protocols cannot be checked from this document.
Why it applies: qaqc_disclosed is not true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Stale Data Re-releasenegative
Historical results re-announced with no new assays or reinterpretation — low genuine novelty.
Why it applies: the fact restates a prior release
NPD-D1Windy Ridge Gold Antimony Prospect · goldGrade: 3.9Grade Unit: g/tIntercept: 1 mHistorical resultNeeds review: historical_restatementView all detailsHide details
Identity
- Hole ID
- NPD-D1
- Project
- Windy Ridge Gold Antimony Prospect
- Commodity
- gold
- Region
- australia_nsw
- Reported Region
- australia_nsw
- Ticker
- RIM
Geometry
- Grade
- 3.9
- Grade Unit
- g/t
- Intercept
- 1 m
- From
- 189 m
- To
- 190 m
- Intercept Depth
- 189 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- NPD-D1:189-190
Compositing
- Dilution Disclosed
- Yes
Review
- Needs Review
- Yes
- Review Reason
- historical_restatement
- Interp. Status
- scored
- Historical
- Yes
- Historical Source Date
- 2026-04-24T00:00:00.000Z
Dates
- Event date
- 2026-09-30T00:00:00.000Z
Reasoning: The resampling confirms a higher-grade gold sub-interval, which is a positive for the prospect, but its historical nature limits novelty.
Positive factors
- Higher gold grade over a narrow interval.
- Confirmation of historical gold mineralisation through resampling.
- QP sign-off on the resampling and analysis.
Negative factors
- This is a re-statement and confirmation of historical data, limiting novelty.
- No true width disclosed.
Evidence · text
“incl 1m @ 3.9g/t gold, 1.6% antimony from 189.0 metres”
Tags used in scoring
No QA/QC Disclosurenegative
Release does not disclose QA/QC — lab certification, CP/QP sign-off and assay protocols cannot be checked from this document.
Why it applies: qaqc_disclosed is not true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Stale Data Re-releasenegative
Historical results re-announced with no new assays or reinterpretation — low genuine novelty.
Why it applies: the fact restates a prior release
NPD-D1Windy Ridge Gold Antimony Prospect · antimonyGrade: 1.6Grade Unit: %Intercept: 1 mHistorical resultNeeds review: historical_restatementView all detailsHide details
Identity
- Hole ID
- NPD-D1
- Project
- Windy Ridge Gold Antimony Prospect
- Commodity
- antimony
- Region
- australia_nsw
- Reported Region
- australia_nsw
- Ticker
- RIM
Geometry
- Grade
- 1.6
- Grade Unit
- %
- Intercept
- 1 m
- From
- 189 m
- To
- 190 m
- Intercept Depth
- 189 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- NPD-D1:189-190
Compositing
- Dilution Disclosed
- Yes
Review
- Needs Review
- Yes
- Review Reason
- historical_restatement
- Interp. Status
- scored
- Historical
- Yes
- Historical Source Date
- 2026-04-24T00:00:00.000Z
Dates
- Event date
- 2026-09-30T00:00:00.000Z
Reasoning: The resampling reveals a high-grade antimony sub-interval in historical core, which is a significant positive addition to the prospect's polymetallic potential.
Positive factors
- High antimony grade over a narrow interval, adding new information where not previously assayed.
- Confirmation of historical mineralisation through resampling.
Negative factors
- This is a re-statement and confirmation of historical data, limiting novelty.
- No true width disclosed.
Evidence · text
“incl 1m @ 3.9g/t gold, 1.6% antimony from 189.0 metres”
Tags used in scoring
No QA/QC Disclosurenegative
Release does not disclose QA/QC — lab certification, CP/QP sign-off and assay protocols cannot be checked from this document.
Why it applies: qaqc_disclosed is not true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Stale Data Re-releasenegative
Historical results re-announced with no new assays or reinterpretation — low genuine novelty.
Why it applies: the fact restates a prior release
Resource Estimates (19)
inferredMurga Scandium Deposit · scandiumTonnes: 56100000Grade: 138Grade Unit: ppmContained Metal: 7760Contained Unit: tHistorical resultNeeds review: historical_restatementView all detailsHide details
Identity
- Project
- Murga Scandium Deposit
- Commodity
- scandium
- Region
- australia_nsw
- Reported Region
- New South Wales
- Ticker
- RIM
Resource scope
- Estimate type
- resource
- Reporting standards
- jorc
- QP Signed
- Yes
- Qualified person names
- Simon Tear
- Resource group id
- resource:280dde78b49a48826f19
Resource Data
- Category
- inferred
- Tonnes
- 56100000
- Grade
- 138
- Grade Unit
- ppm
- Contained Metal
- 7760
- Contained Unit
- t
- Cutoff Grade
- 100
- Cutoff Unit
- ppm Sc
Prior Estimate
- Resource Date
- 2026-04-13
Review
- Needs Review
- Yes
- Review Reason
- historical_restatement
- Historical
- Yes
- Historical Source Date
- 2026-04-13T00:00:00.000Z
Dates
- Event date
- 2026-09-30T00:00:00.000Z
Reasoning: The Murga Scandium Deposit shows substantial inferred resources, which is positive for the company's strategic focus on scandium, but its inferred nature and re-statement reduce its novelty.
Positive factors
- Significant tonnage and contained metal for scandium.
- Resource remains open laterally and at depth, indicating further growth potential.
- JORC 2012 compliant estimate with QP sign-off.
Negative factors
- Resource is entirely in the Inferred category, which is the lowest confidence level.
- This is a re-statement of a previously announced MRE, reducing novelty.
Evidence · table
“138”
Context: 56.1
Tags used in scoring
Inferred Resourcenegative
Speculative category — limited drilling, geological continuity assumed but not confirmed. Cannot support economic studies alone.
Why it applies: category is "inferred"
Cut-off Disclosedpositive
Cut-off grade used for resource reporting is clearly stated, enabling like-for-like comparison.
Why it applies: cutoff_grade is stated
QP/CP Signedpositive
Qualified Person (QP) or Competent Person (CP) named and signed off — a member of a recognized professional association (e.g., AusIMM, SME, AIG, P.Geo) with relevant experience.
Why it applies: qp_signed is true
JORC Compliantpositive
Resource estimate prepared in compliance with JORC Code (Australia) — high reporting standard.
Why it applies: reporting_standards includes jorc
inferredMurga Scandium Deposit · scandiumTonnes: 56100000Grade: 212Grade Unit: ppm Sc OxideContained Metal: 11900Contained Unit: tHistorical resultNeeds review: historical_restatementView all detailsHide details
Identity
- Project
- Murga Scandium Deposit
- Commodity
- scandium
- Region
- australia_nsw
- Reported Region
- New South Wales
- Ticker
- RIM
Resource scope
- Estimate type
- resource
- Reporting standards
- jorc
- QP Signed
- Yes
- Qualified person names
- Simon Tear
- Resource group id
- resource:280dde78b49a48826f19
Resource Data
- Category
- inferred
- Tonnes
- 56100000
- Grade
- 212
- Grade Unit
- ppm Sc Oxide
- Contained Metal
- 11900
- Contained Unit
- t
- Cutoff Grade
- 100
- Cutoff Unit
- ppm Sc
Prior Estimate
- Resource Date
- 2026-04-13
Review
- Needs Review
- Yes
- Review Reason
- historical_restatement
- Historical
- Yes
- Historical Source Date
- 2026-04-13T00:00:00.000Z
Dates
- Event date
- 2026-09-30T00:00:00.000Z
Reasoning: The Murga Scandium Deposit shows substantial inferred resources, which is positive for the company's strategic focus on scandium, but its inferred nature and re-statement reduce its novelty.
Positive factors
- Significant tonnage and contained metal for scandium oxide.
- Resource remains open laterally and at depth, indicating further growth potential.
- JORC 2012 compliant estimate with QP sign-off.
Negative factors
- Resource is entirely in the Inferred category, which is the lowest confidence level.
- This is a re-statement of a previously announced MRE, reducing novelty.
Evidence · table
“212”
Context: 56.1
Tags used in scoring
Inferred Resourcenegative
Speculative category — limited drilling, geological continuity assumed but not confirmed. Cannot support economic studies alone.
Why it applies: category is "inferred"
Cut-off Disclosedpositive
Cut-off grade used for resource reporting is clearly stated, enabling like-for-like comparison.
Why it applies: cutoff_grade is stated
QP/CP Signedpositive
Qualified Person (QP) or Competent Person (CP) named and signed off — a member of a recognized professional association (e.g., AusIMM, SME, AIG, P.Geo) with relevant experience.
Why it applies: qp_signed is true
JORC Compliantpositive
Resource estimate prepared in compliance with JORC Code (Australia) — high reporting standard.
Why it applies: reporting_standards includes jorc
indicatedMelrose · scandiumTonnes: 2900000Grade: 250Grade Unit: ppmContained Metal: 730Contained Unit: tHistorical resultNeeds review: historical_restatementView all detailsHide details
Identity
- Project
- Melrose
- Commodity
- scandium
- Region
- australia_nsw
- Reported Region
- New South Wales
- Ticker
- RIM
Resource scope
- Estimate type
- resource
- Reporting standards
- jorc
- QP Signed
- Yes
- Qualified person names
- Simon Tear
- Resource group id
- resource:4879776b2c49b7e3577c
Resource Data
- Category
- indicated
- Tonnes
- 2900000
- Grade
- 250
- Grade Unit
- ppm
- Contained Metal
- 730
- Contained Unit
- t
- Cutoff Grade
- 100
- Cutoff Unit
- ppm Sc
Prior Estimate
- Resource Date
- 2024-09-09
Review
- Needs Review
- Yes
- Review Reason
- historical_restatement
- Historical
- Yes
- Historical Source Date
- 2024-09-09T00:00:00.000Z
Dates
- Event date
- 2026-09-30T00:00:00.000Z
Reasoning: The Melrose resource provides some indicated confidence for scandium, but its age and re-statement without updates limit its novelty and impact.
Positive factors
- Resource includes an Indicated category, providing higher confidence than Inferred.
- JORC 2012 compliant estimate with QP sign-off.
Negative factors
- This is a re-statement of a prior MRE with an effective date over two years old, indicating low novelty and potential staleness.
- Relatively small tonnage compared to other deposits.
Evidence · table
“250”
Context: 2.9
Tags used in scoring
Indicated Resourcepositive
Reasonable geological confidence based on adequate drilling; continuity can be assumed. Basis for Probable Reserves.
Why it applies: category is "indicated"
Cut-off Disclosedpositive
Cut-off grade used for resource reporting is clearly stated, enabling like-for-like comparison.
Why it applies: cutoff_grade is stated
QP/CP Signedpositive
Qualified Person (QP) or Competent Person (CP) named and signed off — a member of a recognized professional association (e.g., AusIMM, SME, AIG, P.Geo) with relevant experience.
Why it applies: qp_signed is true
JORC Compliantpositive
Resource estimate prepared in compliance with JORC Code (Australia) — high reporting standard.
Why it applies: reporting_standards includes jorc
Stale Estimatenegative
Effective date is >2 years old — data currency concern, may not reflect current geological understanding.
Why it applies: effective date is 2.1 years before this release
indicatedMelrose · scandiumTonnes: 2900000Grade: 380Grade Unit: ppm Sc OxideContained Metal: 1120Contained Unit: tHistorical resultNeeds review: historical_restatementView all detailsHide details
Identity
- Project
- Melrose
- Commodity
- scandium
- Region
- australia_nsw
- Reported Region
- New South Wales
- Ticker
- RIM
Resource scope
- Estimate type
- resource
- Reporting standards
- jorc
- QP Signed
- Yes
- Qualified person names
- Simon Tear
- Resource group id
- resource:4879776b2c49b7e3577c
Resource Data
- Category
- indicated
- Tonnes
- 2900000
- Grade
- 380
- Grade Unit
- ppm Sc Oxide
- Contained Metal
- 1120
- Contained Unit
- t
- Cutoff Grade
- 100
- Cutoff Unit
- ppm Sc
Prior Estimate
- Resource Date
- 2024-09-09
Review
- Needs Review
- Yes
- Review Reason
- historical_restatement
- Historical
- Yes
- Historical Source Date
- 2024-09-09T00:00:00.000Z
Dates
- Event date
- 2026-09-30T00:00:00.000Z
Reasoning: The Melrose resource provides some indicated confidence for scandium, but its age and re-statement without updates limit its novelty and impact.
Positive factors
- Resource includes an Indicated category, providing higher confidence than Inferred.
- JORC 2012 compliant estimate with QP sign-off.
Negative factors
- This is a re-statement of a prior MRE with an effective date over two years old, indicating low novelty and potential staleness.
- Relatively small tonnage compared to other deposits.
Evidence · table
“380”
Context: 2.9
Tags used in scoring
Indicated Resourcepositive
Reasonable geological confidence based on adequate drilling; continuity can be assumed. Basis for Probable Reserves.
Why it applies: category is "indicated"
Cut-off Disclosedpositive
Cut-off grade used for resource reporting is clearly stated, enabling like-for-like comparison.
Why it applies: cutoff_grade is stated
QP/CP Signedpositive
Qualified Person (QP) or Competent Person (CP) named and signed off — a member of a recognized professional association (e.g., AusIMM, SME, AIG, P.Geo) with relevant experience.
Why it applies: qp_signed is true
JORC Compliantpositive
Resource estimate prepared in compliance with JORC Code (Australia) — high reporting standard.
Why it applies: reporting_standards includes jorc
Stale Estimatenegative
Effective date is >2 years old — data currency concern, may not reflect current geological understanding.
Why it applies: effective date is 2.1 years before this release
inferredMelrose · scandiumTonnes: 100000Grade: 200Grade Unit: ppmContained Metal: 16Contained Unit: tHistorical resultNeeds review: historical_restatementView all detailsHide details
Identity
- Project
- Melrose
- Commodity
- scandium
- Region
- australia_nsw
- Reported Region
- New South Wales
- Ticker
- RIM
Resource scope
- Estimate type
- resource
- Reporting standards
- jorc
- QP Signed
- Yes
- Qualified person names
- Simon Tear
- Resource group id
- resource:12767f88be16d3058f02
Resource Data
- Category
- inferred
- Tonnes
- 100000
- Grade
- 200
- Grade Unit
- ppm
- Contained Metal
- 16
- Contained Unit
- t
- Cutoff Grade
- 100
- Cutoff Unit
- ppm Sc
Prior Estimate
- Resource Date
- 2024-09-09
Review
- Needs Review
- Yes
- Review Reason
- historical_restatement
- Historical
- Yes
- Historical Source Date
- 2024-09-09T00:00:00.000Z
Dates
- Event date
- 2026-09-30T00:00:00.000Z
Reasoning: The Melrose inferred resource is very small and stale, contributing little new material information.
Positive factors
- JORC 2012 compliant estimate with QP sign-off.
Negative factors
- Resource is in the Inferred category, which is the lowest confidence level.
- Very small tonnage and contained metal.
- This is a re-statement of a prior MRE with an effective date over two years old, indicating low novelty and potential staleness.
Evidence · table
“200”
Context: 0.1
Tags used in scoring
Inferred Resourcenegative
Speculative category — limited drilling, geological continuity assumed but not confirmed. Cannot support economic studies alone.
Why it applies: category is "inferred"
Cut-off Disclosedpositive
Cut-off grade used for resource reporting is clearly stated, enabling like-for-like comparison.
Why it applies: cutoff_grade is stated
QP/CP Signedpositive
Qualified Person (QP) or Competent Person (CP) named and signed off — a member of a recognized professional association (e.g., AusIMM, SME, AIG, P.Geo) with relevant experience.
Why it applies: qp_signed is true
JORC Compliantpositive
Resource estimate prepared in compliance with JORC Code (Australia) — high reporting standard.
Why it applies: reporting_standards includes jorc
Stale Estimatenegative
Effective date is >2 years old — data currency concern, may not reflect current geological understanding.
Why it applies: effective date is 2.1 years before this release
inferredMelrose · scandiumTonnes: 100000Grade: 310Grade Unit: ppm Sc OxideContained Metal: 25Contained Unit: tHistorical resultNeeds review: historical_restatementView all detailsHide details
Identity
- Project
- Melrose
- Commodity
- scandium
- Region
- australia_nsw
- Reported Region
- New South Wales
- Ticker
- RIM
Resource scope
- Estimate type
- resource
- Reporting standards
- jorc
- QP Signed
- Yes
- Qualified person names
- Simon Tear
- Resource group id
- resource:12767f88be16d3058f02
Resource Data
- Category
- inferred
- Tonnes
- 100000
- Grade
- 310
- Grade Unit
- ppm Sc Oxide
- Contained Metal
- 25
- Contained Unit
- t
- Cutoff Grade
- 100
- Cutoff Unit
- ppm Sc
Prior Estimate
- Resource Date
- 2024-09-09
Review
- Needs Review
- Yes
- Review Reason
- historical_restatement
- Historical
- Yes
- Historical Source Date
- 2024-09-09T00:00:00.000Z
Dates
- Event date
- 2026-09-30T00:00:00.000Z
Reasoning: The Melrose inferred resource is very small and stale, contributing little new material information.
Positive factors
- JORC 2012 compliant estimate with QP sign-off.
Negative factors
- Resource is in the Inferred category, which is the lowest confidence level.
- Very small tonnage and contained metal.
- This is a re-statement of a prior MRE with an effective date over two years old, indicating low novelty and potential staleness.
Evidence · table
“310”
Context: 0.1
Tags used in scoring
Inferred Resourcenegative
Speculative category — limited drilling, geological continuity assumed but not confirmed. Cannot support economic studies alone.
Why it applies: category is "inferred"
Cut-off Disclosedpositive
Cut-off grade used for resource reporting is clearly stated, enabling like-for-like comparison.
Why it applies: cutoff_grade is stated
QP/CP Signedpositive
Qualified Person (QP) or Competent Person (CP) named and signed off — a member of a recognized professional association (e.g., AusIMM, SME, AIG, P.Geo) with relevant experience.
Why it applies: qp_signed is true
JORC Compliantpositive
Resource estimate prepared in compliance with JORC Code (Australia) — high reporting standard.
Why it applies: reporting_standards includes jorc
Stale Estimatenegative
Effective date is >2 years old — data currency concern, may not reflect current geological understanding.
Why it applies: effective date is 2.1 years before this release
inferredCurrajong · scandiumTonnes: 3800000Grade: 170Grade Unit: ppmContained Metal: 639Contained Unit: tHistorical resultNeeds review: historical_restatementView all detailsHide details
Identity
- Project
- Currajong
- Commodity
- scandium
- Region
- australia_nsw
- Reported Region
- New South Wales
- Ticker
- RIM
Resource scope
- Estimate type
- resource
- Reporting standards
- jorc
- QP Signed
- Yes
- Qualified person names
- Simon Tear
- Resource group id
- resource:8b1871550e24a9cdb823
- Deposit or zone
- Laterite
Resource Data
- Category
- inferred
- Tonnes
- 3800000
- Grade
- 170
- Grade Unit
- ppm
- Contained Metal
- 639
- Contained Unit
- t
- Cutoff Grade
- 100
- Cutoff Unit
- ppm Sc
Prior Estimate
- Resource Date
- 2025-10-20
Review
- Needs Review
- Yes
- Review Reason
- historical_restatement
- Historical
- Yes
- Historical Source Date
- 2025-10-20T00:00:00.000Z
Dates
- Event date
- 2026-09-30T00:00:00.000Z
Reasoning: The maiden inferred resource for Currajong's laterite zone is a significant positive step, adding to the company's scandium inventory, despite its inferred classification.
Positive factors
- Maiden Mineral Resource Estimate for the Currajong deposit, establishing a new scandium resource.
- JORC 2012 compliant estimate with QP sign-off.
- Good grade for scandium in the laterite zone.
Negative factors
- Resource is entirely in the Inferred category, which is the lowest confidence level.
- This is a re-statement of a previously announced MRE, reducing novelty slightly.
Evidence · table
“170”
Context: 3.8
Tags used in scoring
Inferred Resourcenegative
Speculative category — limited drilling, geological continuity assumed but not confirmed. Cannot support economic studies alone.
Why it applies: category is "inferred"
Cut-off Disclosedpositive
Cut-off grade used for resource reporting is clearly stated, enabling like-for-like comparison.
Why it applies: cutoff_grade is stated
QP/CP Signedpositive
Qualified Person (QP) or Competent Person (CP) named and signed off — a member of a recognized professional association (e.g., AusIMM, SME, AIG, P.Geo) with relevant experience.
Why it applies: qp_signed is true
JORC Compliantpositive
Resource estimate prepared in compliance with JORC Code (Australia) — high reporting standard.
Why it applies: reporting_standards includes jorc
inferredCurrajong · scandiumTonnes: 3800000Grade: 261Grade Unit: ppm Sc OxideContained Metal: 979Contained Unit: tHistorical resultNeeds review: historical_restatementView all detailsHide details
Identity
- Project
- Currajong
- Commodity
- scandium
- Region
- australia_nsw
- Reported Region
- New South Wales
- Ticker
- RIM
Resource scope
- Estimate type
- resource
- Reporting standards
- jorc
- QP Signed
- Yes
- Qualified person names
- Simon Tear
- Resource group id
- resource:8b1871550e24a9cdb823
- Deposit or zone
- Laterite
Resource Data
- Category
- inferred
- Tonnes
- 3800000
- Grade
- 261
- Grade Unit
- ppm Sc Oxide
- Contained Metal
- 979
- Contained Unit
- t
- Cutoff Grade
- 100
- Cutoff Unit
- ppm Sc
Prior Estimate
- Resource Date
- 2025-10-20
Review
- Needs Review
- Yes
- Review Reason
- historical_restatement
- Historical
- Yes
- Historical Source Date
- 2025-10-20T00:00:00.000Z
Dates
- Event date
- 2026-09-30T00:00:00.000Z
Reasoning: The maiden inferred resource for Currajong's laterite zone is a significant positive step, adding to the company's scandium inventory, despite its inferred classification.
Positive factors
- Maiden Mineral Resource Estimate for the Currajong deposit, establishing a new scandium resource.
- JORC 2012 compliant estimate with QP sign-off.
- Good grade for scandium oxide in the laterite zone.
Negative factors
- Resource is entirely in the Inferred category, which is the lowest confidence level.
- This is a re-statement of a previously announced MRE, reducing novelty slightly.
Evidence · table
“261”
Context: 3.8
Tags used in scoring
Inferred Resourcenegative
Speculative category — limited drilling, geological continuity assumed but not confirmed. Cannot support economic studies alone.
Why it applies: category is "inferred"
Cut-off Disclosedpositive
Cut-off grade used for resource reporting is clearly stated, enabling like-for-like comparison.
Why it applies: cutoff_grade is stated
QP/CP Signedpositive
Qualified Person (QP) or Competent Person (CP) named and signed off — a member of a recognized professional association (e.g., AusIMM, SME, AIG, P.Geo) with relevant experience.
Why it applies: qp_signed is true
JORC Compliantpositive
Resource estimate prepared in compliance with JORC Code (Australia) — high reporting standard.
Why it applies: reporting_standards includes jorc
inferredCurrajong · scandiumTonnes: 11300000Grade: 126Grade Unit: ppmContained Metal: 1420Contained Unit: tHistorical resultNeeds review: historical_restatementView all detailsHide details
Identity
- Project
- Currajong
- Commodity
- scandium
- Region
- australia_nsw
- Reported Region
- New South Wales
- Ticker
- RIM
Resource scope
- Estimate type
- resource
- Reporting standards
- jorc
- QP Signed
- Yes
- Qualified person names
- Simon Tear
- Resource group id
- resource:66fa79b234a4b73e8288
- Deposit or zone
- Ultramafic
Resource Data
- Category
- inferred
- Tonnes
- 11300000
- Grade
- 126
- Grade Unit
- ppm
- Contained Metal
- 1420
- Contained Unit
- t
- Cutoff Grade
- 100
- Cutoff Unit
- ppm Sc
Prior Estimate
- Resource Date
- 2025-10-20
Review
- Needs Review
- Yes
- Review Reason
- historical_restatement
- Historical
- Yes
- Historical Source Date
- 2025-10-20T00:00:00.000Z
Dates
- Event date
- 2026-09-30T00:00:00.000Z
Reasoning: The maiden inferred resource for Currajong's ultramafic zone is a significant positive step, adding to the company's scandium inventory, despite its inferred classification.
Positive factors
- Maiden Mineral Resource Estimate for the Currajong deposit, establishing a new scandium resource.
- JORC 2012 compliant estimate with QP sign-off.
- Significant tonnage in the ultramafic zone.
Negative factors
- Resource is entirely in the Inferred category, which is the lowest confidence level.
- This is a re-statement of a previously announced MRE, reducing novelty slightly.
Evidence · table
“126”
Context: 11.3
Tags used in scoring
Inferred Resourcenegative
Speculative category — limited drilling, geological continuity assumed but not confirmed. Cannot support economic studies alone.
Why it applies: category is "inferred"
Cut-off Disclosedpositive
Cut-off grade used for resource reporting is clearly stated, enabling like-for-like comparison.
Why it applies: cutoff_grade is stated
QP/CP Signedpositive
Qualified Person (QP) or Competent Person (CP) named and signed off — a member of a recognized professional association (e.g., AusIMM, SME, AIG, P.Geo) with relevant experience.
Why it applies: qp_signed is true
JORC Compliantpositive
Resource estimate prepared in compliance with JORC Code (Australia) — high reporting standard.
Why it applies: reporting_standards includes jorc
inferredCurrajong · scandiumTonnes: 11300000Grade: 193Grade Unit: ppm Sc OxideContained Metal: 2183Contained Unit: tHistorical resultNeeds review: historical_restatementView all detailsHide details
Identity
- Project
- Currajong
- Commodity
- scandium
- Region
- australia_nsw
- Reported Region
- New South Wales
- Ticker
- RIM
Resource scope
- Estimate type
- resource
- Reporting standards
- jorc
- QP Signed
- Yes
- Qualified person names
- Simon Tear
- Resource group id
- resource:66fa79b234a4b73e8288
- Deposit or zone
- Ultramafic
Resource Data
- Category
- inferred
- Tonnes
- 11300000
- Grade
- 193
- Grade Unit
- ppm Sc Oxide
- Contained Metal
- 2183
- Contained Unit
- t
- Cutoff Grade
- 100
- Cutoff Unit
- ppm Sc
Prior Estimate
- Resource Date
- 2025-10-20
Review
- Needs Review
- Yes
- Review Reason
- historical_restatement
- Historical
- Yes
- Historical Source Date
- 2025-10-20T00:00:00.000Z
Dates
- Event date
- 2026-09-30T00:00:00.000Z
Reasoning: The maiden inferred resource for Currajong's ultramafic zone is a significant positive step, adding to the company's scandium inventory, despite its inferred classification.
Positive factors
- Maiden Mineral Resource Estimate for the Currajong deposit, establishing a new scandium resource.
- JORC 2012 compliant estimate with QP sign-off.
- Significant tonnage in the ultramafic zone.
Negative factors
- Resource is entirely in the Inferred category, which is the lowest confidence level.
- This is a re-statement of a previously announced MRE, reducing novelty slightly.
Evidence · table
“193”
Context: 11.3
Tags used in scoring
Inferred Resourcenegative
Speculative category — limited drilling, geological continuity assumed but not confirmed. Cannot support economic studies alone.
Why it applies: category is "inferred"
Cut-off Disclosedpositive
Cut-off grade used for resource reporting is clearly stated, enabling like-for-like comparison.
Why it applies: cutoff_grade is stated
QP/CP Signedpositive
Qualified Person (QP) or Competent Person (CP) named and signed off — a member of a recognized professional association (e.g., AusIMM, SME, AIG, P.Geo) with relevant experience.
Why it applies: qp_signed is true
JORC Compliantpositive
Resource estimate prepared in compliance with JORC Code (Australia) — high reporting standard.
Why it applies: reporting_standards includes jorc
measuredSorpresa · goldTonnes: 189000Grade: 2.54Grade Unit: g/tContained Metal: 15.4Contained Unit: kozHistorical resultNeeds review: historical_restatementView all detailsHide details
Identity
- Project
- Sorpresa
- Commodity
- gold
- Region
- australia_nsw
- Reported Region
- New South Wales
- Ticker
- RIM
Resource scope
- Estimate type
- resource
- Reporting standards
- jorc
- QP Signed
- Yes
- Qualified person names
- Arnold van der Heyden
- Resource group id
- resource:29fabd4b34b24ccc594c
Resource Data
- Category
- measured
- Tonnes
- 189000
- Grade
- 2.54
- Grade Unit
- g/t
- Contained Metal
- 15.4
- Contained Unit
- koz
- Cutoff Grade
- 1
- Cutoff Unit
- g/t Au
Prior Estimate
- Resource Date
- 2019-11-06
Review
- Needs Review
- Yes
- Review Reason
- historical_restatement
- Historical
- Yes
- Historical Source Date
- 2019-11-06T00:00:00.000Z
Dates
- Event date
- 2026-09-30T00:00:00.000Z
Reasoning: The Sorpresa gold resource, while having a Measured component, is very old and has not been updated, making it low novelty.
Positive factors
- Resource includes a Measured category, representing the highest confidence level.
- JORC compliant estimate with QP sign-off.
Negative factors
- This is a re-statement of a prior MRE with an effective date over five years old, indicating very low novelty and significant staleness.
- Relatively small tonnage and contained gold.
Evidence · table
“2.54”
Context: 0.189
Tags used in scoring
Measured Resourcepositive
Highest confidence category — tonnage, grade, shape well-established from closely-spaced drilling. Basis for Proven Reserves.
Why it applies: category is "measured"
Cut-off Disclosedpositive
Cut-off grade used for resource reporting is clearly stated, enabling like-for-like comparison.
Why it applies: cutoff_grade is stated
QP/CP Signedpositive
Qualified Person (QP) or Competent Person (CP) named and signed off — a member of a recognized professional association (e.g., AusIMM, SME, AIG, P.Geo) with relevant experience.
Why it applies: qp_signed is true
JORC Compliantpositive
Resource estimate prepared in compliance with JORC Code (Australia) — high reporting standard.
Why it applies: reporting_standards includes jorc
Stale Estimatenegative
Effective date is >2 years old — data currency concern, may not reflect current geological understanding.
Why it applies: effective date is 6.9 years before this release
measuredSorpresa · silverTonnes: 189000Grade: 70Grade Unit: g/tContained Metal: 0.43Contained Unit: mozHistorical resultNeeds review: historical_restatementView all detailsHide details
Identity
- Project
- Sorpresa
- Commodity
- silver
- Region
- australia_nsw
- Reported Region
- New South Wales
- Ticker
- RIM
Resource scope
- Estimate type
- resource
- Reporting standards
- jorc
- QP Signed
- Yes
- Qualified person names
- Arnold van der Heyden
- Resource group id
- resource:29fabd4b34b24ccc594c
Resource Data
- Category
- measured
- Tonnes
- 189000
- Grade
- 70
- Grade Unit
- g/t
- Contained Metal
- 0.43
- Contained Unit
- moz
- Cutoff Grade
- 85
- Cutoff Unit
- g/t Ag
Prior Estimate
- Resource Date
- 2019-11-06
Review
- Needs Review
- Yes
- Review Reason
- historical_restatement
- Historical
- Yes
- Historical Source Date
- 2019-11-06T00:00:00.000Z
Dates
- Event date
- 2026-09-30T00:00:00.000Z
Reasoning: The Sorpresa silver resource, while having a Measured component, is very old and has not been updated, making it low novelty.
Positive factors
- Resource includes a Measured category, representing the highest confidence level.
- JORC compliant estimate with QP sign-off.
Negative factors
- This is a re-statement of a prior MRE with an effective date over five years old, indicating very low novelty and significant staleness.
- Relatively small tonnage and contained silver.
Evidence · table
“70”
Context: 0.189
Tags used in scoring
Measured Resourcepositive
Highest confidence category — tonnage, grade, shape well-established from closely-spaced drilling. Basis for Proven Reserves.
Why it applies: category is "measured"
Cut-off Disclosedpositive
Cut-off grade used for resource reporting is clearly stated, enabling like-for-like comparison.
Why it applies: cutoff_grade is stated
QP/CP Signedpositive
Qualified Person (QP) or Competent Person (CP) named and signed off — a member of a recognized professional association (e.g., AusIMM, SME, AIG, P.Geo) with relevant experience.
Why it applies: qp_signed is true
JORC Compliantpositive
Resource estimate prepared in compliance with JORC Code (Australia) — high reporting standard.
Why it applies: reporting_standards includes jorc
Stale Estimatenegative
Effective date is >2 years old — data currency concern, may not reflect current geological understanding.
Why it applies: effective date is 6.9 years before this release
indicatedSorpresa · goldTonnes: 1041000Grade: 1.25Grade Unit: g/tContained Metal: 41.7Contained Unit: kozHistorical resultNeeds review: historical_restatementView all detailsHide details
Identity
- Project
- Sorpresa
- Commodity
- gold
- Region
- australia_nsw
- Reported Region
- New South Wales
- Ticker
- RIM
Resource scope
- Estimate type
- resource
- Reporting standards
- jorc
- QP Signed
- Yes
- Qualified person names
- Arnold van der Heyden
- Resource group id
- resource:a339ab329f6e6a1c6eff
Resource Data
- Category
- indicated
- Tonnes
- 1041000
- Grade
- 1.25
- Grade Unit
- g/t
- Contained Metal
- 41.7
- Contained Unit
- koz
- Cutoff Grade
- 1
- Cutoff Unit
- g/t Au
Prior Estimate
- Resource Date
- 2019-11-06
Review
- Needs Review
- Yes
- Review Reason
- historical_restatement
- Historical
- Yes
- Historical Source Date
- 2019-11-06T00:00:00.000Z
Dates
- Event date
- 2026-09-30T00:00:00.000Z
Reasoning: The Sorpresa gold resource, while having an Indicated component, is very old and has not been updated, making it low novelty.
Positive factors
- Resource includes an Indicated category, providing higher confidence than Inferred.
- JORC compliant estimate with QP sign-off.
Negative factors
- This is a re-statement of a prior MRE with an effective date over five years old, indicating very low novelty and significant staleness.
- Moderate grade for gold.
Evidence · table
“1.25”
Context: 1.041
Tags used in scoring
Indicated Resourcepositive
Reasonable geological confidence based on adequate drilling; continuity can be assumed. Basis for Probable Reserves.
Why it applies: category is "indicated"
Cut-off Disclosedpositive
Cut-off grade used for resource reporting is clearly stated, enabling like-for-like comparison.
Why it applies: cutoff_grade is stated
QP/CP Signedpositive
Qualified Person (QP) or Competent Person (CP) named and signed off — a member of a recognized professional association (e.g., AusIMM, SME, AIG, P.Geo) with relevant experience.
Why it applies: qp_signed is true
JORC Compliantpositive
Resource estimate prepared in compliance with JORC Code (Australia) — high reporting standard.
Why it applies: reporting_standards includes jorc
Stale Estimatenegative
Effective date is >2 years old — data currency concern, may not reflect current geological understanding.
Why it applies: effective date is 6.9 years before this release
indicatedSorpresa · silverTonnes: 1041000Grade: 78Grade Unit: g/tContained Metal: 2.62Contained Unit: mozHistorical resultNeeds review: historical_restatementView all detailsHide details
Identity
- Project
- Sorpresa
- Commodity
- silver
- Region
- australia_nsw
- Reported Region
- New South Wales
- Ticker
- RIM
Resource scope
- Estimate type
- resource
- Reporting standards
- jorc
- QP Signed
- Yes
- Qualified person names
- Arnold van der Heyden
- Resource group id
- resource:a339ab329f6e6a1c6eff
Resource Data
- Category
- indicated
- Tonnes
- 1041000
- Grade
- 78
- Grade Unit
- g/t
- Contained Metal
- 2.62
- Contained Unit
- moz
- Cutoff Grade
- 85
- Cutoff Unit
- g/t Ag
Prior Estimate
- Resource Date
- 2019-11-06
Review
- Needs Review
- Yes
- Review Reason
- historical_restatement
- Historical
- Yes
- Historical Source Date
- 2019-11-06T00:00:00.000Z
Dates
- Event date
- 2026-09-30T00:00:00.000Z
Reasoning: The Sorpresa silver resource, while having an Indicated component, is very old and has not been updated, making it low novelty.
Positive factors
- Resource includes an Indicated category, providing higher confidence than Inferred.
- JORC compliant estimate with QP sign-off.
Negative factors
- This is a re-statement of a prior MRE with an effective date over five years old, indicating very low novelty and significant staleness.
- Good grade for silver.
Evidence · table
“78”
Context: 1.041
Tags used in scoring
Indicated Resourcepositive
Reasonable geological confidence based on adequate drilling; continuity can be assumed. Basis for Probable Reserves.
Why it applies: category is "indicated"
Cut-off Disclosedpositive
Cut-off grade used for resource reporting is clearly stated, enabling like-for-like comparison.
Why it applies: cutoff_grade is stated
QP/CP Signedpositive
Qualified Person (QP) or Competent Person (CP) named and signed off — a member of a recognized professional association (e.g., AusIMM, SME, AIG, P.Geo) with relevant experience.
Why it applies: qp_signed is true
JORC Compliantpositive
Resource estimate prepared in compliance with JORC Code (Australia) — high reporting standard.
Why it applies: reporting_standards includes jorc
Stale Estimatenegative
Effective date is >2 years old — data currency concern, may not reflect current geological understanding.
Why it applies: effective date is 6.9 years before this release
inferredSorpresa · goldTonnes: 289000Grade: 1.84Grade Unit: g/tContained Metal: 17.1Contained Unit: kozHistorical resultNeeds review: historical_restatementView all detailsHide details
Identity
- Project
- Sorpresa
- Commodity
- gold
- Region
- australia_nsw
- Reported Region
- New South Wales
- Ticker
- RIM
Resource scope
- Estimate type
- resource
- Reporting standards
- jorc
- QP Signed
- Yes
- Qualified person names
- Arnold van der Heyden
- Resource group id
- resource:2a1df1a03ea991d12a6a
Resource Data
- Category
- inferred
- Tonnes
- 289000
- Grade
- 1.84
- Grade Unit
- g/t
- Contained Metal
- 17.1
- Contained Unit
- koz
- Cutoff Grade
- 1
- Cutoff Unit
- g/t Au
Prior Estimate
- Resource Date
- 2019-11-06
Review
- Needs Review
- Yes
- Review Reason
- historical_restatement
- Historical
- Yes
- Historical Source Date
- 2019-11-06T00:00:00.000Z
Dates
- Event date
- 2026-09-30T00:00:00.000Z
Reasoning: The Sorpresa inferred gold resource is old and has not been updated, making it low novelty and confidence.
Positive factors
- JORC compliant estimate with QP sign-off.
Negative factors
- Resource is in the Inferred category, which is the lowest confidence level.
- This is a re-statement of a prior MRE with an effective date over five years old, indicating very low novelty and significant staleness.
- Relatively small tonnage and contained gold.
Evidence · table
“1.84”
Context: 0.289
Tags used in scoring
Inferred Resourcenegative
Speculative category — limited drilling, geological continuity assumed but not confirmed. Cannot support economic studies alone.
Why it applies: category is "inferred"
Cut-off Disclosedpositive
Cut-off grade used for resource reporting is clearly stated, enabling like-for-like comparison.
Why it applies: cutoff_grade is stated
QP/CP Signedpositive
Qualified Person (QP) or Competent Person (CP) named and signed off — a member of a recognized professional association (e.g., AusIMM, SME, AIG, P.Geo) with relevant experience.
Why it applies: qp_signed is true
JORC Compliantpositive
Resource estimate prepared in compliance with JORC Code (Australia) — high reporting standard.
Why it applies: reporting_standards includes jorc
Stale Estimatenegative
Effective date is >2 years old — data currency concern, may not reflect current geological understanding.
Why it applies: effective date is 6.9 years before this release
inferredSorpresa · silverTonnes: 289000Grade: 42Grade Unit: g/tContained Metal: 0.39Contained Unit: mozHistorical resultNeeds review: historical_restatementView all detailsHide details
Identity
- Project
- Sorpresa
- Commodity
- silver
- Region
- australia_nsw
- Reported Region
- New South Wales
- Ticker
- RIM
Resource scope
- Estimate type
- resource
- Reporting standards
- jorc
- QP Signed
- Yes
- Qualified person names
- Arnold van der Heyden
- Resource group id
- resource:2a1df1a03ea991d12a6a
Resource Data
- Category
- inferred
- Tonnes
- 289000
- Grade
- 42
- Grade Unit
- g/t
- Contained Metal
- 0.39
- Contained Unit
- moz
- Cutoff Grade
- 85
- Cutoff Unit
- g/t Ag
Prior Estimate
- Resource Date
- 2019-11-06
Review
- Needs Review
- Yes
- Review Reason
- historical_restatement
- Historical
- Yes
- Historical Source Date
- 2019-11-06T00:00:00.000Z
Dates
- Event date
- 2026-09-30T00:00:00.000Z
Reasoning: The Sorpresa inferred silver resource is old and has not been updated, making it low novelty and confidence.
Positive factors
- JORC compliant estimate with QP sign-off.
Negative factors
- Resource is in the Inferred category, which is the lowest confidence level.
- This is a re-statement of a prior MRE with an effective date over five years old, indicating very low novelty and significant staleness.
- Relatively small tonnage and contained silver.
Evidence · table
“42”
Context: 0.289
Tags used in scoring
Inferred Resourcenegative
Speculative category — limited drilling, geological continuity assumed but not confirmed. Cannot support economic studies alone.
Why it applies: category is "inferred"
Cut-off Disclosedpositive
Cut-off grade used for resource reporting is clearly stated, enabling like-for-like comparison.
Why it applies: cutoff_grade is stated
QP/CP Signedpositive
Qualified Person (QP) or Competent Person (CP) named and signed off — a member of a recognized professional association (e.g., AusIMM, SME, AIG, P.Geo) with relevant experience.
Why it applies: qp_signed is true
JORC Compliantpositive
Resource estimate prepared in compliance with JORC Code (Australia) — high reporting standard.
Why it applies: reporting_standards includes jorc
Stale Estimatenegative
Effective date is >2 years old — data currency concern, may not reflect current geological understanding.
Why it applies: effective date is 6.9 years before this release
Fact 17View all detailsHide details
Identity
- Ticker
- RIM
Review
- Needs Review
- No
- Historical
- No
Dates
- Event date
- 2026-09-30T00:00:00.000Z
Reasoning: The capital raise is a significant positive event, securing funding for the company's operations, though the pending shareholder approval for Tranche 2 introduces a minor risk.
Positive factors
- Successful capital raise provides funding for ongoing exploration and development activities.
- Issuance of free attaching options provides additional incentive for investors.
- Tranche 1 shares issued under existing placement capacity, demonstrating immediate funding.
Negative factors
- A portion of the capital raise is subject to shareholder approval, introducing some uncertainty.
- The share price for the placement is relatively low ($0.008 per share).
Evidence · text
“During August 2026 a placement to issue of a total of 287,500,000 fully paid ordinary shares (“New Shares”) to professional and sophisticated investors eligible under section 708 of the Corporations Act was undertaken. The New Shares will be issued at a price of $0.008 (0.8 cents) per share, raising $2.3 million before costs. The Placement was conducted in two tranches with: • 214,275,000 New Shares being issued under the Company’s existing placement capacity under ASX Listing Rule 7.1 (Tranche 1 Placement); and • 73,225,000 New Shares being subject to shareholder approval to be sought at a General Meeting of the Company’s shareholders to be held in November 2026 (Tranche 2 Placement). In addition, a total of 287,500,000 free attaching unlisted options are being issued to participants in the Placement on a one (1) for one (1) basis, being one (1) free attaching unlisted option for every new share subscribed for and issued under the Placement with an exercise price of $0.015 (1.5 cents) each, and an expiry date of 31 August 2029 (“Attaching Options”), subject to shareholder approval (see ASX Announcement dated 7 August 2026).”
Tags used in scoring
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
No Contained Metalnegative
Tonnage and grade reported but contained metal not calculated or disclosed — incomplete reporting.
Why it applies: contained_metal was not reported
Fact 18Rabbit Trap Scandium Project (EL8666)View all detailsHide details
Identity
- Project
- Rabbit Trap Scandium Project (EL8666)
- Ticker
- RIM
Resource scope
- Resource group id
- resource:0f7a5c305b779d12f631
Review
- Needs Review
- No
- Historical
- No
Dates
- Event date
- 2026-09-30T00:00:00.000Z
Reasoning: The acquisition of 100% ownership of EL8666 is a clear positive, consolidating a key scandium prospect for the company.
Positive factors
- Securing 100% ownership of EL8666, which contains the Malamute Scandium Prospect, consolidates control over a key asset.
- Acquisition was based on encouraging drilling results, validating the prospect's potential.
Evidence · text
“Acquiring 100% of EL8666 which contains the Malamute Scandium Prospect”
Tags used in scoring
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
No Contained Metalnegative
Tonnage and grade reported but contained metal not calculated or disclosed — incomplete reporting.
Why it applies: contained_metal was not reported
Fact 19Avondale ProjectView all detailsHide details
Identity
- Project
- Avondale Project
- Ticker
- RIM
Resource scope
- Resource group id
- resource:069b703ea5001ace8d67
Review
- Needs Review
- No
- Historical
- No
Dates
- Event date
- 2026-09-30T00:00:00.000Z
Reasoning: The vesting of GPR's earn-in interest in the Avondale Project is a positive validation of the project, securing a 60% interest for Rimfire.
Positive factors
- Golden Plains Resources (GPR) satisfied its earn-in obligations, validating the project's prospectivity.
- Retaining a 60% interest in the Avondale Project, which hosts the Currajong Scandium Deposit.
Negative factors
- Company's interest reduced from 100% to 60% due to the earn-in, though this is a planned outcome.
Evidence · text
“after the end of the period Rimfire secured a 60% interest in the Avondale project after its Fifield exploration partner Golden Plains Resources (“GPR”) satisfied its obligations under the terms of the Avondale Earn In Agreement (the “Agreement”) to vest a 40% interest in the project.”
Tags used in scoring
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
No Contained Metalnegative
Tonnage and grade reported but contained metal not calculated or disclosed — incomplete reporting.
Why it applies: contained_metal was not reported
Metallurgical Results (1)
bottle rollMurga Scandium Deposit · scandiumRecovery: 75 %View all detailsHide details
Identity
- Project
- Murga Scandium Deposit
- Commodity
- scandium
- Region
- australia_nsw
- Reported Region
- New South Wales
- Ticker
- RIM
Test Work
- Program Status
- preliminary
- Test Type
- bottle roll
- Processing Route
- atmospheric leaching
- Sample
- Two ~3.5kg composite HQ quarter core samples of laterite and saprolite - hosted low iron scandium mineralised material
- Leach Time
- 336 hours
Recovery
- Recovery
- 75 %
- Recovery Basis
- theoretical
Lab
- Consultant
- Mr. Boyd Willis
Review
- Needs Review
- No
- Historical
- No
Dates
- Event date
- 2026-09-30T00:00:00.000Z
Reasoning: The preliminary metallurgical test work for Murga scandium is highly novel and encouraging, suggesting a potentially economic processing route, but the results are theoretical and require further validation.
Positive factors
- First ever metallurgical examination of Murga scandium mineralised material.
- Encouraging potential recoveries (60-90%) indicated for atmospheric leaching, which is less capital intensive.
- Low iron extraction, reducing acid consumption.
- Work guided by a metallurgical process consultant.
Negative factors
- Test work is preliminary (14-day bottle rolls only) and requires further confirmation over longer periods.
- Recoveries are 'potential' and 'could be achieved', indicating a theoretical rather than actual achieved result.
- No specific laboratory named for the test work.
Evidence · text
“scandium recoveries of 60 – 90% could potentially be achieved”
Tags used in scoring
Theoretical Recovery Onlynegative
Only theoretical or liberation-derived recovery reported, with no actual test result.
Why it applies: recovery_basis is theoretical
How Atlas produces this analysis
Minestarters Atlas uses automated extraction to summarize mining announcements, identify reported measurements, and classify supporting evidence. Sentiment reflects the extracted narrative and classification rules; it is an interpretation, not a reported measurement. Evidence quotes and context are provided where available. Missing data, low-confidence results, and review flags indicate limitations. Check the original publisher announcement before relying on an interpretation.