QML: Further High-Grade Copper-Gold Beneath Mt Chalmers Pit
Original announcement by asx on
- Company
- QMines Limited
- Ticker
- QML
- Exchange
- ASX
- Region
- central Queensland
- Primary commodity
- Copper
- Secondary commodities
- Gold, Silver, Zinc, Lead
- Document categories
- Drill results, Resource update, Metallurgy
- Extracted
- 2026-10-18 22:13:04 UTC
Analysis by Minestarters Atlas
Atlas analysis published:
Minestarters Atlas analysis
Summary
QMines Limited has reported further high-grade copper-gold drill results from its pontoon drilling program beneath the Mt Chalmers pit in central Queensland. Intercepts include 2.4m at 5.37% Cu and 3.83g/t Au (9.07% CuEq) in hole 26MCDD043, confirming VHMS-style mineralization and providing data for an upcoming Mineral Resource update. The program also encountered historic underground workings, leading to the abandonment of two holes, but mineralization remains open at depth in one instance.
Reasoning: The announcement reports multiple high-grade copper-gold intercepts, including bonanza grades for copper, from drilling beneath the Mt Chalmers pit. These results confirm the VHMS style mineralization, provide data for an upcoming resource update, and support metallurgical testwork. While true widths are unknown and some holes were abandoned, the overall results are positive for the project's potential.
Positive factors
- High-grade copper and gold intercepts, including bonanza grades for copper, were returned from multiple holes.
- Results confirm and extend high-grade VHMS mineralization beneath the existing Mt Chalmers pit lake.
- The drilling provides critical data for an upcoming Mineral Resource update, de-risking the grade model.
- Fresh core from drilling supports ongoing geometallurgical testwork.
- Mineralization remains open below one of the abandoned holes, indicating further potential.
- Detailed QA/QC procedures are disclosed, enhancing confidence in the results.
Negative factors
- True widths of mineralization are not yet known, which may overstate apparent lengths.
- Two holes were abandoned due to mechanical issues or historic underground workings, limiting their full extent.
- Core loss was recorded in a high-grade interval of 26MCDD043, potentially affecting representativeness.
- Continuity between the high-grade intercepts in 26MCDD043 and 26MCDD047 remains to be established.
Facts used in scoring: 54
Classification and evidence
Mill Routeneutral
Processing via mill or concentrator (CIL, CIP, tank leach, flotation).
Why it applies: the document describes a flotation route ("flotation")
Extracted facts
Stored fact records: 54. Some facts used in scoring do not have a stored record.
Drill Results (54)
26MCDD043Mt Chalmers · copperGrade: 1.28Grade Unit: %Intercept: 26.2 mView all detailsHide details
Identity
- Hole ID
- 26MCDD043
- Project
- Mt Chalmers
- Commodity
- copper
- Region
- australia_qld
- Reported Region
- australia_qld
- Ticker
- QML
Geometry
- Grade
- 1.28
- Grade Unit
- %
- Intercept
- 26.2 m
- From
- 36.4 m
- To
- 62.6 m
- Hole Depth
- 119.8 m
- Intercept Depth
- 36.4 m
Classification
- Deposit Type
- vms
- Program
- exploration
- Sample Type
- drill
- Group ID
- 26MCDD043:36.4-62.6
- Mining Method
- underground
Location
- Easting
- 259915
- Northing
- 7421315
- Elevation
- 91.2 m
- Azimuth
- 77 °
- Dip
- -88 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Laboratories
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Deleterious
- Deleterious Flag
- No
Metal Equivalent
- Metal Eq. Grade
- 1.99
- Metal Eq. Unit
- % CuEq
- Assumptions Disclosed
- Yes
Compositing
- Cutoff Grade
- 0.2
- Cutoff Unit
- % Cu
- Dilution Disclosed
- Yes
- Max Dilution
- 2 m
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-10-18T00:00:00.000Z
Reasoning: This intercept shows a strong copper grade over a significant length, contributing positively to the project's potential, despite some core loss and unknown true width.
Positive factors
- Good copper grade for VHMS deposit type (1.28% Cu is strong against VMS 0.8% moderate threshold).
- Significant intercept length (26.2m is strong continuity).
- Polymetallic intercept with gold, silver, zinc, and lead credits.
- Contributes to geological understanding for upcoming resource update.
Negative factors
- True width not known, potentially overstating actual thickness.
- Core loss (67% recovery) in the upper high-grade interval raises concerns about representativeness.
Evidence · table
“1.28”
Context: 26.2
Rejected tags
Rejected tags — excluded from scoring because their label or evidence could not be verified.
Apparent Width OnlyRejected · negative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Reason: The interval is given as downhole width with no true width or drill orientation, meaning apparent width may overstate true thickness.
Evidence · text
“True widths are not known.”
QA/QC DisclosedRejected · positive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Reason: The release includes QA/QC disclosure, mentioning certified lab (ALS Brisbane), QP sign-off (Thomas Bartschi), and stated methods (standards, blanks, duplicates, check assays).
Evidence · text
“QMines' QAQC program included certified reference materials, coarse blanks and quarter-core field duplicates inserted into the sample stream at routine intervals.”
Compositing TransparentRejected · positive
Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Reason: Cut-off grade (0.2% Cu) and internal dilution rules (maximum 2m) are clearly stated for reported intervals.
Evidence · text
“Copper intervals are reported at a 0.2% Cu lower cut off and zinc intervals at a 1.0% Zn lower cut off, with a maximum of 2m of consecutive internal dilution and a minimum length of 1m.”
26MCDD043Mt Chalmers · goldGrade: 0.73Grade Unit: g/tIntercept: 26.2 mView all detailsHide details
Identity
- Hole ID
- 26MCDD043
- Project
- Mt Chalmers
- Commodity
- gold
- Region
- australia_qld
- Reported Region
- australia_qld
- Ticker
- QML
Geometry
- Grade
- 0.73
- Grade Unit
- g/t
- Intercept
- 26.2 m
- From
- 36.4 m
- To
- 62.6 m
- Hole Depth
- 119.8 m
- Intercept Depth
- 36.4 m
Classification
- Deposit Type
- vms
- Program
- exploration
- Sample Type
- drill
- Group ID
- 26MCDD043:36.4-62.6
- Mining Method
- underground
Location
- Easting
- 259915
- Northing
- 7421315
- Elevation
- 91.2 m
- Azimuth
- 77 °
- Dip
- -88 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Laboratories
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Deleterious
- Deleterious Flag
- No
Metal Equivalent
- Metal Eq. Grade
- 1.99
- Metal Eq. Unit
- % CuEq
- Assumptions Disclosed
- Yes
Compositing
- Cutoff Grade
- 0.2
- Cutoff Unit
- % Cu
- Dilution Disclosed
- Yes
- Max Dilution
- 2 m
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-10-18T00:00:00.000Z
Reasoning: While part of a significant polymetallic intercept, the gold grade for this interval is below the weak threshold for underground VHMS deposits, but still contributes to the overall project value.
Positive factors
- Polymetallic intercept with significant copper and other base metals.
- Contributes to geological understanding for upcoming resource update.
Negative factors
- Gold grade (0.73 g/t) is below the weak threshold for underground VMS (2.5 g/t).
- True width not known, potentially overstating actual thickness.
- Core loss (67% recovery) in the upper high-grade interval raises concerns about representativeness.
Evidence · table
“0.73”
Context: 26.2
Rejected tags
Rejected tags — excluded from scoring because their label or evidence could not be verified.
Apparent Width OnlyRejected · negative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Reason: The interval is given as downhole width with no true width or drill orientation, meaning apparent width may overstate true thickness.
Evidence · text
“True widths are not known.”
QA/QC DisclosedRejected · positive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Reason: The release includes QA/QC disclosure, mentioning certified lab (ALS Brisbane), QP sign-off (Thomas Bartschi), and stated methods (standards, blanks, duplicates, check assays).
Evidence · text
“QMines' QAQC program included certified reference materials, coarse blanks and quarter-core field duplicates inserted into the sample stream at routine intervals.”
Compositing TransparentRejected · positive
Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Reason: Cut-off grade (0.2% Cu) and internal dilution rules (maximum 2m) are clearly stated for reported intervals.
Evidence · text
“Copper intervals are reported at a 0.2% Cu lower cut off and zinc intervals at a 1.0% Zn lower cut off, with a maximum of 2m of consecutive internal dilution and a minimum length of 1m.”
26MCDD043Mt Chalmers · silverGrade: 6Grade Unit: g/tIntercept: 26.2 mView all detailsHide details
Identity
- Hole ID
- 26MCDD043
- Project
- Mt Chalmers
- Commodity
- silver
- Region
- australia_qld
- Reported Region
- australia_qld
- Ticker
- QML
Geometry
- Grade
- 6
- Grade Unit
- g/t
- Intercept
- 26.2 m
- From
- 36.4 m
- To
- 62.6 m
- Hole Depth
- 119.8 m
- Intercept Depth
- 36.4 m
Classification
- Deposit Type
- vms
- Program
- exploration
- Sample Type
- drill
- Group ID
- 26MCDD043:36.4-62.6
- Mining Method
- underground
Location
- Easting
- 259915
- Northing
- 7421315
- Elevation
- 91.2 m
- Azimuth
- 77 °
- Dip
- -88 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Laboratories
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Deleterious
- Deleterious Flag
- No
Metal Equivalent
- Metal Eq. Grade
- 1.99
- Metal Eq. Unit
- % CuEq
- Assumptions Disclosed
- Yes
Compositing
- Cutoff Grade
- 0.2
- Cutoff Unit
- % Cu
- Dilution Disclosed
- Yes
- Max Dilution
- 2 m
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-10-18T00:00:00.000Z
Reasoning: The silver grade for this interval is low, but it is part of a broader polymetallic intercept that contributes to the overall project value.
Positive factors
- Polymetallic intercept with significant copper and other base metals.
- Contributes to geological understanding for upcoming resource update.
Negative factors
- Silver grade (6 g/t) is well below the weak threshold for silver (30 g/t).
- True width not known, potentially overstating actual thickness.
- Core loss (67% recovery) in the upper high-grade interval raises concerns about representativeness.
Evidence · table
“6”
Context: 26.2
Rejected tags
Rejected tags — excluded from scoring because their label or evidence could not be verified.
Apparent Width OnlyRejected · negative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Reason: The interval is given as downhole width with no true width or drill orientation, meaning apparent width may overstate true thickness.
Evidence · text
“True widths are not known.”
QA/QC DisclosedRejected · positive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Reason: The release includes QA/QC disclosure, mentioning certified lab (ALS Brisbane), QP sign-off (Thomas Bartschi), and stated methods (standards, blanks, duplicates, check assays).
Evidence · text
“QMines' QAQC program included certified reference materials, coarse blanks and quarter-core field duplicates inserted into the sample stream at routine intervals.”
Compositing TransparentRejected · positive
Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Reason: Cut-off grade (0.2% Cu) and internal dilution rules (maximum 2m) are clearly stated for reported intervals.
Evidence · text
“Copper intervals are reported at a 0.2% Cu lower cut off and zinc intervals at a 1.0% Zn lower cut off, with a maximum of 2m of consecutive internal dilution and a minimum length of 1m.”
26MCDD043Mt Chalmers · zincGrade: 0.19Grade Unit: %Intercept: 26.2 mView all detailsHide details
Identity
- Hole ID
- 26MCDD043
- Project
- Mt Chalmers
- Commodity
- zinc
- Region
- australia_qld
- Reported Region
- australia_qld
- Ticker
- QML
Geometry
- Grade
- 0.19
- Grade Unit
- %
- Intercept
- 26.2 m
- From
- 36.4 m
- To
- 62.6 m
- Hole Depth
- 119.8 m
- Intercept Depth
- 36.4 m
Classification
- Deposit Type
- vms
- Program
- exploration
- Sample Type
- drill
- Group ID
- 26MCDD043:36.4-62.6
- Mining Method
- underground
Location
- Easting
- 259915
- Northing
- 7421315
- Elevation
- 91.2 m
- Azimuth
- 77 °
- Dip
- -88 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Laboratories
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Deleterious
- Deleterious Flag
- No
Metal Equivalent
- Metal Eq. Grade
- 1.99
- Metal Eq. Unit
- % CuEq
- Assumptions Disclosed
- Yes
Compositing
- Cutoff Grade
- 0.2
- Cutoff Unit
- % Cu
- Dilution Disclosed
- Yes
- Max Dilution
- 2 m
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-10-18T00:00:00.000Z
Reasoning: The zinc grade for this interval is very low, but it is part of a broader polymetallic intercept that contributes to the overall project value.
Positive factors
- Polymetallic intercept with significant copper and other base metals.
- Contributes to geological understanding for upcoming resource update.
Negative factors
- Zinc grade (0.19%) is well below the weak threshold for VMS zinc (2%).
- True width not known, potentially overstating actual thickness.
- Core loss (67% recovery) in the upper high-grade interval raises concerns about representativeness.
Evidence · table
“0.19”
Context: 26.2
Rejected tags
Rejected tags — excluded from scoring because their label or evidence could not be verified.
Apparent Width OnlyRejected · negative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Reason: The interval is given as downhole width with no true width or drill orientation, meaning apparent width may overstate true thickness.
Evidence · text
“True widths are not known.”
QA/QC DisclosedRejected · positive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Reason: The release includes QA/QC disclosure, mentioning certified lab (ALS Brisbane), QP sign-off (Thomas Bartschi), and stated methods (standards, blanks, duplicates, check assays).
Evidence · text
“QMines' QAQC program included certified reference materials, coarse blanks and quarter-core field duplicates inserted into the sample stream at routine intervals.”
Compositing TransparentRejected · positive
Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Reason: Cut-off grade (0.2% Cu) and internal dilution rules (maximum 2m) are clearly stated for reported intervals.
Evidence · text
“Copper intervals are reported at a 0.2% Cu lower cut off and zinc intervals at a 1.0% Zn lower cut off, with a maximum of 2m of consecutive internal dilution and a minimum length of 1m.”
26MCDD043Mt Chalmers · leadGrade: 0.07Grade Unit: %Intercept: 26.2 mView all detailsHide details
Identity
- Hole ID
- 26MCDD043
- Project
- Mt Chalmers
- Commodity
- lead
- Region
- australia_qld
- Reported Region
- australia_qld
- Ticker
- QML
Geometry
- Grade
- 0.07
- Grade Unit
- %
- Intercept
- 26.2 m
- From
- 36.4 m
- To
- 62.6 m
- Hole Depth
- 119.8 m
- Intercept Depth
- 36.4 m
Classification
- Deposit Type
- vms
- Program
- exploration
- Sample Type
- drill
- Group ID
- 26MCDD043:36.4-62.6
- Mining Method
- underground
Location
- Easting
- 259915
- Northing
- 7421315
- Elevation
- 91.2 m
- Azimuth
- 77 °
- Dip
- -88 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Laboratories
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Deleterious
- Deleterious Flag
- No
Metal Equivalent
- Metal Eq. Grade
- 1.99
- Metal Eq. Unit
- % CuEq
- Assumptions Disclosed
- Yes
Compositing
- Cutoff Grade
- 0.2
- Cutoff Unit
- % Cu
- Dilution Disclosed
- Yes
- Max Dilution
- 2 m
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-10-18T00:00:00.000Z
Reasoning: The lead grade for this interval is very low, but it is part of a broader polymetallic intercept that contributes to the overall project value.
Positive factors
- Polymetallic intercept with significant copper and other base metals.
- Contributes to geological understanding for upcoming resource update.
Negative factors
- Lead grade (0.07%) is well below the weak threshold for lead (1%).
- True width not known, potentially overstating actual thickness.
- Core loss (67% recovery) in the upper high-grade interval raises concerns about representativeness.
Evidence · table
“0.07”
Context: 26.2
Rejected tags
Rejected tags — excluded from scoring because their label or evidence could not be verified.
Apparent Width OnlyRejected · negative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Reason: The interval is given as downhole width with no true width or drill orientation, meaning apparent width may overstate true thickness.
Evidence · text
“True widths are not known.”
QA/QC DisclosedRejected · positive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Reason: The release includes QA/QC disclosure, mentioning certified lab (ALS Brisbane), QP sign-off (Thomas Bartschi), and stated methods (standards, blanks, duplicates, check assays).
Evidence · text
“QMines' QAQC program included certified reference materials, coarse blanks and quarter-core field duplicates inserted into the sample stream at routine intervals.”
Compositing TransparentRejected · positive
Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Reason: Cut-off grade (0.2% Cu) and internal dilution rules (maximum 2m) are clearly stated for reported intervals.
Evidence · text
“Copper intervals are reported at a 0.2% Cu lower cut off and zinc intervals at a 1.0% Zn lower cut off, with a maximum of 2m of consecutive internal dilution and a minimum length of 1m.”
26MCDD043Mt Chalmers · copperGrade: 3.45Grade Unit: %Intercept: 4.4 mView all detailsHide details
Identity
- Hole ID
- 26MCDD043
- Project
- Mt Chalmers
- Commodity
- copper
- Region
- australia_qld
- Reported Region
- australia_qld
- Ticker
- QML
Geometry
- Grade
- 3.45
- Grade Unit
- %
- Intercept
- 4.4 m
- From
- 37.6 m
- To
- 42 m
- Hole Depth
- 119.8 m
- Intercept Depth
- 36.4 m
Classification
- Deposit Type
- vms
- Program
- exploration
- Sample Type
- drill
- Group ID
- 26MCDD043:37.6-42
- Mining Method
- underground
Location
- Easting
- 259915
- Northing
- 7421315
- Elevation
- 91.2 m
- Azimuth
- 77 °
- Dip
- -88 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Laboratories
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Deleterious
- Deleterious Flag
- No
Metal Equivalent
- Metal Eq. Grade
- 5.75
- Metal Eq. Unit
- % CuEq
- Assumptions Disclosed
- Yes
Compositing
- Cutoff Grade
- 1
- Cutoff Unit
- % Cu
- Dilution Disclosed
- Yes
- Max Dilution
- 2 m
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-10-18T00:00:00.000Z
Reasoning: This intercept shows an exceptional copper grade, significantly enhancing the project's potential, despite some core loss and unknown true width.
Positive factors
- High copper grade (3.45% Cu) is exceptional for VMS deposit type (>=2.5% exceptional threshold).
- Polymetallic intercept with strong gold and silver credits.
- Contributes to geological understanding for upcoming resource update.
Negative factors
- True width not known, potentially overstating actual thickness.
- Core loss (67% recovery) in the upper high-grade interval raises concerns about representativeness.
Evidence · table
“3.45”
Context: 4.4
Rejected tags
Rejected tags — excluded from scoring because their label or evidence could not be verified.
Bonanza InterceptRejected · positive
Exceptionally high-grade zone, well above the deposit-type norm.
Reason: The copper grade of 3.45% is exceptional for a VMS deposit, exceeding the 2.5% exceptional threshold.
Evidence · table
“3.45”
Context: 4.4
Apparent Width OnlyRejected · negative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Reason: The interval is given as downhole width with no true width or drill orientation, meaning apparent width may overstate true thickness.
Evidence · text
“True widths are not known.”
QA/QC DisclosedRejected · positive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Reason: The release includes QA/QC disclosure, mentioning certified lab (ALS Brisbane), QP sign-off (Thomas Bartschi), and stated methods (standards, blanks, duplicates, check assays).
Evidence · text
“QMines' QAQC program included certified reference materials, coarse blanks and quarter-core field duplicates inserted into the sample stream at routine intervals.”
Compositing TransparentRejected · positive
Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Reason: Cut-off grade (1.0% Cu) and internal dilution rules (maximum 2m) are clearly stated for reported intervals.
Evidence · text
“Included intervals are reported at 1.0% Cu and 2.0% Cu on the same basis.”
26MCDD043Mt Chalmers · goldGrade: 2.42Grade Unit: g/tIntercept: 4.4 mView all detailsHide details
Identity
- Hole ID
- 26MCDD043
- Project
- Mt Chalmers
- Commodity
- gold
- Region
- australia_qld
- Reported Region
- australia_qld
- Ticker
- QML
Geometry
- Grade
- 2.42
- Grade Unit
- g/t
- Intercept
- 4.4 m
- From
- 37.6 m
- To
- 42 m
- Hole Depth
- 119.8 m
- Intercept Depth
- 36.4 m
Classification
- Deposit Type
- vms
- Program
- exploration
- Sample Type
- drill
- Group ID
- 26MCDD043:37.6-42
- Mining Method
- underground
Location
- Easting
- 259915
- Northing
- 7421315
- Elevation
- 91.2 m
- Azimuth
- 77 °
- Dip
- -88 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Laboratories
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Deleterious
- Deleterious Flag
- No
Metal Equivalent
- Metal Eq. Grade
- 5.75
- Metal Eq. Unit
- % CuEq
- Assumptions Disclosed
- Yes
Compositing
- Cutoff Grade
- 1
- Cutoff Unit
- % Cu
- Dilution Disclosed
- Yes
- Max Dilution
- 2 m
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-10-18T00:00:00.000Z
Reasoning: While part of a high-grade polymetallic intercept, the gold grade for this interval is slightly below the weak threshold for underground VHMS deposits, but still adds value.
Positive factors
- Polymetallic intercept with exceptional copper and other base metals.
- Contributes to geological understanding for upcoming resource update.
Negative factors
- Gold grade (2.42 g/t) is just below the weak threshold for underground VMS (2.5 g/t).
- True width not known, potentially overstating actual thickness.
- Core loss (67% recovery) in the upper high-grade interval raises concerns about representativeness.
Evidence · table
“2.42”
Context: 4.4
Rejected tags
Rejected tags — excluded from scoring because their label or evidence could not be verified.
Apparent Width OnlyRejected · negative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Reason: The interval is given as downhole width with no true width or drill orientation, meaning apparent width may overstate true thickness.
Evidence · text
“True widths are not known.”
QA/QC DisclosedRejected · positive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Reason: The release includes QA/QC disclosure, mentioning certified lab (ALS Brisbane), QP sign-off (Thomas Bartschi), and stated methods (standards, blanks, duplicates, check assays).
Evidence · text
“QMines' QAQC program included certified reference materials, coarse blanks and quarter-core field duplicates inserted into the sample stream at routine intervals.”
Compositing TransparentRejected · positive
Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Reason: Cut-off grade (1.0% Cu) and internal dilution rules (maximum 2m) are clearly stated for reported intervals.
Evidence · text
“Included intervals are reported at 1.0% Cu and 2.0% Cu on the same basis.”
26MCDD043Mt Chalmers · silverGrade: 19Grade Unit: g/tIntercept: 4.4 mView all detailsHide details
Identity
- Hole ID
- 26MCDD043
- Project
- Mt Chalmers
- Commodity
- silver
- Region
- australia_qld
- Reported Region
- australia_qld
- Ticker
- QML
Geometry
- Grade
- 19
- Grade Unit
- g/t
- Intercept
- 4.4 m
- From
- 37.6 m
- To
- 42 m
- Hole Depth
- 119.8 m
- Intercept Depth
- 36.4 m
Classification
- Deposit Type
- vms
- Program
- exploration
- Sample Type
- drill
- Group ID
- 26MCDD043:37.6-42
- Mining Method
- underground
Location
- Easting
- 259915
- Northing
- 7421315
- Elevation
- 91.2 m
- Azimuth
- 77 °
- Dip
- -88 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Laboratories
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Deleterious
- Deleterious Flag
- No
Metal Equivalent
- Metal Eq. Grade
- 5.75
- Metal Eq. Unit
- % CuEq
- Assumptions Disclosed
- Yes
Compositing
- Cutoff Grade
- 1
- Cutoff Unit
- % Cu
- Dilution Disclosed
- Yes
- Max Dilution
- 2 m
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-10-18T00:00:00.000Z
Reasoning: The silver grade for this interval is low, but it is part of a broader high-grade polymetallic intercept that contributes to the overall project value.
Positive factors
- Polymetallic intercept with exceptional copper and other base metals.
- Contributes to geological understanding for upcoming resource update.
Negative factors
- Silver grade (19 g/t) is below the weak threshold for silver (30 g/t).
- True width not known, potentially overstating actual thickness.
- Core loss (67% recovery) in the upper high-grade interval raises concerns about representativeness.
Evidence · table
“19”
Context: 4.4
Rejected tags
Rejected tags — excluded from scoring because their label or evidence could not be verified.
Apparent Width OnlyRejected · negative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Reason: The interval is given as downhole width with no true width or drill orientation, meaning apparent width may overstate true thickness.
Evidence · text
“True widths are not known.”
QA/QC DisclosedRejected · positive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Reason: The release includes QA/QC disclosure, mentioning certified lab (ALS Brisbane), QP sign-off (Thomas Bartschi), and stated methods (standards, blanks, duplicates, check assays).
Evidence · text
“QMines' QAQC program included certified reference materials, coarse blanks and quarter-core field duplicates inserted into the sample stream at routine intervals.”
Compositing TransparentRejected · positive
Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Reason: Cut-off grade (1.0% Cu) and internal dilution rules (maximum 2m) are clearly stated for reported intervals.
Evidence · text
“Included intervals are reported at 1.0% Cu and 2.0% Cu on the same basis.”
26MCDD043Mt Chalmers · zincGrade: 0.59Grade Unit: %Intercept: 4.4 mView all detailsHide details
Identity
- Hole ID
- 26MCDD043
- Project
- Mt Chalmers
- Commodity
- zinc
- Region
- australia_qld
- Reported Region
- australia_qld
- Ticker
- QML
Geometry
- Grade
- 0.59
- Grade Unit
- %
- Intercept
- 4.4 m
- From
- 37.6 m
- To
- 42 m
- Hole Depth
- 119.8 m
- Intercept Depth
- 36.4 m
Classification
- Deposit Type
- vms
- Program
- exploration
- Sample Type
- drill
- Group ID
- 26MCDD043:37.6-42
- Mining Method
- underground
Location
- Easting
- 259915
- Northing
- 7421315
- Elevation
- 91.2 m
- Azimuth
- 77 °
- Dip
- -88 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Laboratories
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Deleterious
- Deleterious Flag
- No
Metal Equivalent
- Metal Eq. Grade
- 5.75
- Metal Eq. Unit
- % CuEq
- Assumptions Disclosed
- Yes
Compositing
- Cutoff Grade
- 1
- Cutoff Unit
- % Cu
- Dilution Disclosed
- Yes
- Max Dilution
- 2 m
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-10-18T00:00:00.000Z
Reasoning: The zinc grade for this interval is very low, but it is part of a broader high-grade polymetallic intercept that contributes to the overall project value.
Positive factors
- Polymetallic intercept with exceptional copper and other base metals.
- Contributes to geological understanding for upcoming resource update.
Negative factors
- Zinc grade (0.59%) is well below the weak threshold for VMS zinc (2%).
- True width not known, potentially overstating actual thickness.
- Core loss (67% recovery) in the upper high-grade interval raises concerns about representativeness.
Evidence · table
“0.59”
Context: 4.4
Rejected tags
Rejected tags — excluded from scoring because their label or evidence could not be verified.
Apparent Width OnlyRejected · negative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Reason: The interval is given as downhole width with no true width or drill orientation, meaning apparent width may overstate true thickness.
Evidence · text
“True widths are not known.”
QA/QC DisclosedRejected · positive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Reason: The release includes QA/QC disclosure, mentioning certified lab (ALS Brisbane), QP sign-off (Thomas Bartschi), and stated methods (standards, blanks, duplicates, check assays).
Evidence · text
“QMines' QAQC program included certified reference materials, coarse blanks and quarter-core field duplicates inserted into the sample stream at routine intervals.”
Compositing TransparentRejected · positive
Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Reason: Cut-off grade (1.0% Cu) and internal dilution rules (maximum 2m) are clearly stated for reported intervals.
Evidence · text
“Included intervals are reported at 1.0% Cu and 2.0% Cu on the same basis.”
26MCDD043Mt Chalmers · leadGrade: 0.2Grade Unit: %Intercept: 4.4 mView all detailsHide details
Identity
- Hole ID
- 26MCDD043
- Project
- Mt Chalmers
- Commodity
- lead
- Region
- australia_qld
- Reported Region
- australia_qld
- Ticker
- QML
Geometry
- Grade
- 0.2
- Grade Unit
- %
- Intercept
- 4.4 m
- From
- 37.6 m
- To
- 42 m
- Hole Depth
- 119.8 m
- Intercept Depth
- 36.4 m
Classification
- Deposit Type
- vms
- Program
- exploration
- Sample Type
- drill
- Group ID
- 26MCDD043:37.6-42
- Mining Method
- underground
Location
- Easting
- 259915
- Northing
- 7421315
- Elevation
- 91.2 m
- Azimuth
- 77 °
- Dip
- -88 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Laboratories
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Deleterious
- Deleterious Flag
- No
Metal Equivalent
- Metal Eq. Grade
- 5.75
- Metal Eq. Unit
- % CuEq
- Assumptions Disclosed
- Yes
Compositing
- Cutoff Grade
- 1
- Cutoff Unit
- % Cu
- Dilution Disclosed
- Yes
- Max Dilution
- 2 m
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-10-18T00:00:00.000Z
Reasoning: The lead grade for this interval is very low, but it is part of a broader high-grade polymetallic intercept that contributes to the overall project value.
Positive factors
- Polymetallic intercept with exceptional copper and other base metals.
- Contributes to geological understanding for upcoming resource update.
Negative factors
- Lead grade (0.20%) is well below the weak threshold for lead (1%).
- True width not known, potentially overstating actual thickness.
- Core loss (67% recovery) in the upper high-grade interval raises concerns about representativeness.
Evidence · table
“0.20”
Context: 4.4
Rejected tags
Rejected tags — excluded from scoring because their label or evidence could not be verified.
Apparent Width OnlyRejected · negative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Reason: The interval is given as downhole width with no true width or drill orientation, meaning apparent width may overstate true thickness.
Evidence · text
“True widths are not known.”
QA/QC DisclosedRejected · positive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Reason: The release includes QA/QC disclosure, mentioning certified lab (ALS Brisbane), QP sign-off (Thomas Bartschi), and stated methods (standards, blanks, duplicates, check assays).
Evidence · text
“QMines' QAQC program included certified reference materials, coarse blanks and quarter-core field duplicates inserted into the sample stream at routine intervals.”
Compositing TransparentRejected · positive
Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Reason: Cut-off grade (1.0% Cu) and internal dilution rules (maximum 2m) are clearly stated for reported intervals.
Evidence · text
“Included intervals are reported at 1.0% Cu and 2.0% Cu on the same basis.”
26MCDD043Mt Chalmers · copperGrade: 5.37Grade Unit: %Intercept: 2.4 mView all detailsHide details
Identity
- Hole ID
- 26MCDD043
- Project
- Mt Chalmers
- Commodity
- copper
- Region
- australia_qld
- Reported Region
- australia_qld
- Ticker
- QML
Geometry
- Grade
- 5.37
- Grade Unit
- %
- Intercept
- 2.4 m
- From
- 37.6 m
- To
- 40 m
- Hole Depth
- 119.8 m
- Intercept Depth
- 36.4 m
Classification
- Deposit Type
- vms
- Program
- exploration
- Sample Type
- drill
- Group ID
- 26MCDD043:37.6-40
- Mining Method
- underground
Location
- Easting
- 259915
- Northing
- 7421315
- Elevation
- 91.2 m
- Azimuth
- 77 °
- Dip
- -88 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Laboratories
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Deleterious
- Deleterious Flag
- No
Metal Equivalent
- Metal Eq. Grade
- 9.07
- Metal Eq. Unit
- % CuEq
- Assumptions Disclosed
- Yes
Compositing
- Cutoff Grade
- 2
- Cutoff Unit
- % Cu
- Dilution Disclosed
- Yes
- Max Dilution
- 2 m
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-10-18T00:00:00.000Z
Reasoning: This bonanza-grade copper intercept is highly positive, demonstrating exceptional mineralization, despite its narrow width and unknown true width.
Positive factors
- Very high copper grade (5.37% Cu) is exceptional for VMS deposit type (>=2.5% exceptional threshold).
- Polymetallic intercept with strong gold and silver credits.
- Contributes to geological understanding for upcoming resource update.
Negative factors
- Narrow intercept length (2.4m is narrow continuity).
- True width not known, potentially overstating actual thickness.
- Core loss (67% recovery) in the upper high-grade interval raises concerns about representativeness.
Evidence · table
“5.37”
Context: 2.4
Rejected tags
Rejected tags — excluded from scoring because their label or evidence could not be verified.
Bonanza InterceptRejected · positive
Exceptionally high-grade zone, well above the deposit-type norm.
Reason: The copper grade of 5.37% is exceptional for a VMS deposit, exceeding the 2.5% exceptional threshold.
Evidence · table
“5.37”
Context: 2.4
Apparent Width OnlyRejected · negative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Reason: The interval is given as downhole width with no true width or drill orientation, meaning apparent width may overstate true thickness.
Evidence · text
“True widths are not known.”
QA/QC DisclosedRejected · positive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Reason: The release includes QA/QC disclosure, mentioning certified lab (ALS Brisbane), QP sign-off (Thomas Bartschi), and stated methods (standards, blanks, duplicates, check assays).
Evidence · text
“QMines' QAQC program included certified reference materials, coarse blanks and quarter-core field duplicates inserted into the sample stream at routine intervals.”
Compositing TransparentRejected · positive
Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Reason: Cut-off grade (2.0% Cu) and internal dilution rules (maximum 2m) are clearly stated for reported intervals.
Evidence · text
“Included intervals are reported at 1.0% Cu and 2.0% Cu on the same basis.”
26MCDD043Mt Chalmers · goldGrade: 3.83Grade Unit: g/tIntercept: 2.4 mView all detailsHide details
Identity
- Hole ID
- 26MCDD043
- Project
- Mt Chalmers
- Commodity
- gold
- Region
- australia_qld
- Reported Region
- australia_qld
- Ticker
- QML
Geometry
- Grade
- 3.83
- Grade Unit
- g/t
- Intercept
- 2.4 m
- From
- 37.6 m
- To
- 40 m
- Hole Depth
- 119.8 m
- Intercept Depth
- 36.4 m
Classification
- Deposit Type
- vms
- Program
- exploration
- Sample Type
- drill
- Group ID
- 26MCDD043:37.6-40
- Mining Method
- underground
Location
- Easting
- 259915
- Northing
- 7421315
- Elevation
- 91.2 m
- Azimuth
- 77 °
- Dip
- -88 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Laboratories
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Deleterious
- Deleterious Flag
- No
Metal Equivalent
- Metal Eq. Grade
- 9.07
- Metal Eq. Unit
- % CuEq
- Assumptions Disclosed
- Yes
Compositing
- Cutoff Grade
- 2
- Cutoff Unit
- % Cu
- Dilution Disclosed
- Yes
- Max Dilution
- 2 m
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-10-18T00:00:00.000Z
Reasoning: While part of a bonanza-grade polymetallic intercept, the gold grade for this interval is just below the moderate threshold for underground VHMS deposits, but still adds significant value.
Positive factors
- Polymetallic intercept with exceptional copper and other base metals.
- Contributes to geological understanding for upcoming resource update.
Negative factors
- Gold grade (3.83 g/t) is below the moderate threshold for underground VMS (4 g/t).
- Narrow intercept length (2.4m is narrow continuity).
- True width not known, potentially overstating actual thickness.
- Core loss (67% recovery) in the upper high-grade interval raises concerns about representativeness.
Evidence · table
“3.83”
Context: 2.4
Rejected tags
Rejected tags — excluded from scoring because their label or evidence could not be verified.
Apparent Width OnlyRejected · negative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Reason: The interval is given as downhole width with no true width or drill orientation, meaning apparent width may overstate true thickness.
Evidence · text
“True widths are not known.”
QA/QC DisclosedRejected · positive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Reason: The release includes QA/QC disclosure, mentioning certified lab (ALS Brisbane), QP sign-off (Thomas Bartschi), and stated methods (standards, blanks, duplicates, check assays).
Evidence · text
“QMines' QAQC program included certified reference materials, coarse blanks and quarter-core field duplicates inserted into the sample stream at routine intervals.”
Compositing TransparentRejected · positive
Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Reason: Cut-off grade (2.0% Cu) and internal dilution rules (maximum 2m) are clearly stated for reported intervals.
Evidence · text
“Included intervals are reported at 1.0% Cu and 2.0% Cu on the same basis.”
26MCDD043Mt Chalmers · silverGrade: 31Grade Unit: g/tIntercept: 2.4 mView all detailsHide details
Identity
- Hole ID
- 26MCDD043
- Project
- Mt Chalmers
- Commodity
- silver
- Region
- australia_qld
- Reported Region
- australia_qld
- Ticker
- QML
Geometry
- Grade
- 31
- Grade Unit
- g/t
- Intercept
- 2.4 m
- From
- 37.6 m
- To
- 40 m
- Hole Depth
- 119.8 m
- Intercept Depth
- 36.4 m
Classification
- Deposit Type
- vms
- Program
- exploration
- Sample Type
- drill
- Group ID
- 26MCDD043:37.6-40
- Mining Method
- underground
Location
- Easting
- 259915
- Northing
- 7421315
- Elevation
- 91.2 m
- Azimuth
- 77 °
- Dip
- -88 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Laboratories
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Deleterious
- Deleterious Flag
- No
Metal Equivalent
- Metal Eq. Grade
- 9.07
- Metal Eq. Unit
- % CuEq
- Assumptions Disclosed
- Yes
Compositing
- Cutoff Grade
- 2
- Cutoff Unit
- % Cu
- Dilution Disclosed
- Yes
- Max Dilution
- 2 m
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-10-18T00:00:00.000Z
Reasoning: This silver intercept, while weak, is part of a bonanza-grade polymetallic intercept that contributes to the overall project value.
Positive factors
- Silver grade (31 g/t) is above the weak threshold for silver (30 g/t).
- Polymetallic intercept with exceptional copper and other base metals.
- Contributes to geological understanding for upcoming resource update.
Negative factors
- Narrow intercept length (2.4m is narrow continuity).
- True width not known, potentially overstating actual thickness.
- Core loss (67% recovery) in the upper high-grade interval raises concerns about representativeness.
Evidence · table
“31”
Context: 2.4
Rejected tags
Rejected tags — excluded from scoring because their label or evidence could not be verified.
Apparent Width OnlyRejected · negative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Reason: The interval is given as downhole width with no true width or drill orientation, meaning apparent width may overstate true thickness.
Evidence · text
“True widths are not known.”
QA/QC DisclosedRejected · positive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Reason: The release includes QA/QC disclosure, mentioning certified lab (ALS Brisbane), QP sign-off (Thomas Bartschi), and stated methods (standards, blanks, duplicates, check assays).
Evidence · text
“QMines' QAQC program included certified reference materials, coarse blanks and quarter-core field duplicates inserted into the sample stream at routine intervals.”
Compositing TransparentRejected · positive
Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Reason: Cut-off grade (2.0% Cu) and internal dilution rules (maximum 2m) are clearly stated for reported intervals.
Evidence · text
“Included intervals are reported at 1.0% Cu and 2.0% Cu on the same basis.”
26MCDD043Mt Chalmers · zincGrade: 1.04Grade Unit: %Intercept: 2.4 mView all detailsHide details
Identity
- Hole ID
- 26MCDD043
- Project
- Mt Chalmers
- Commodity
- zinc
- Region
- australia_qld
- Reported Region
- australia_qld
- Ticker
- QML
Geometry
- Grade
- 1.04
- Grade Unit
- %
- Intercept
- 2.4 m
- From
- 37.6 m
- To
- 40 m
- Hole Depth
- 119.8 m
- Intercept Depth
- 36.4 m
Classification
- Deposit Type
- vms
- Program
- exploration
- Sample Type
- drill
- Group ID
- 26MCDD043:37.6-40
- Mining Method
- underground
Location
- Easting
- 259915
- Northing
- 7421315
- Elevation
- 91.2 m
- Azimuth
- 77 °
- Dip
- -88 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Laboratories
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Deleterious
- Deleterious Flag
- No
Metal Equivalent
- Metal Eq. Grade
- 9.07
- Metal Eq. Unit
- % CuEq
- Assumptions Disclosed
- Yes
Compositing
- Cutoff Grade
- 2
- Cutoff Unit
- % Cu
- Dilution Disclosed
- Yes
- Max Dilution
- 2 m
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-10-18T00:00:00.000Z
Reasoning: The zinc grade for this interval is low, but it is part of a broader bonanza-grade polymetallic intercept that contributes to the overall project value.
Positive factors
- Polymetallic intercept with exceptional copper and other base metals.
- Contributes to geological understanding for upcoming resource update.
Negative factors
- Zinc grade (1.04%) is below the weak threshold for VMS zinc (2%).
- Narrow intercept length (2.4m is narrow continuity).
- True width not known, potentially overstating actual thickness.
- Core loss (67% recovery) in the upper high-grade interval raises concerns about representativeness.
Evidence · table
“1.04”
Context: 2.4
Rejected tags
Rejected tags — excluded from scoring because their label or evidence could not be verified.
Apparent Width OnlyRejected · negative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Reason: The interval is given as downhole width with no true width or drill orientation, meaning apparent width may overstate true thickness.
Evidence · text
“True widths are not known.”
QA/QC DisclosedRejected · positive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Reason: The release includes QA/QC disclosure, mentioning certified lab (ALS Brisbane), QP sign-off (Thomas Bartschi), and stated methods (standards, blanks, duplicates, check assays).
Evidence · text
“QMines' QAQC program included certified reference materials, coarse blanks and quarter-core field duplicates inserted into the sample stream at routine intervals.”
Compositing TransparentRejected · positive
Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Reason: Cut-off grade (2.0% Cu) and internal dilution rules (maximum 2m) are clearly stated for reported intervals.
Evidence · text
“Included intervals are reported at 1.0% Cu and 2.0% Cu on the same basis.”
26MCDD043Mt Chalmers · leadGrade: 0.35Grade Unit: %Intercept: 2.4 mView all detailsHide details
Identity
- Hole ID
- 26MCDD043
- Project
- Mt Chalmers
- Commodity
- lead
- Region
- australia_qld
- Reported Region
- australia_qld
- Ticker
- QML
Geometry
- Grade
- 0.35
- Grade Unit
- %
- Intercept
- 2.4 m
- From
- 37.6 m
- To
- 40 m
- Hole Depth
- 119.8 m
- Intercept Depth
- 36.4 m
Classification
- Deposit Type
- vms
- Program
- exploration
- Sample Type
- drill
- Group ID
- 26MCDD043:37.6-40
- Mining Method
- underground
Location
- Easting
- 259915
- Northing
- 7421315
- Elevation
- 91.2 m
- Azimuth
- 77 °
- Dip
- -88 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Laboratories
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Deleterious
- Deleterious Flag
- No
Metal Equivalent
- Metal Eq. Grade
- 9.07
- Metal Eq. Unit
- % CuEq
- Assumptions Disclosed
- Yes
Compositing
- Cutoff Grade
- 2
- Cutoff Unit
- % Cu
- Dilution Disclosed
- Yes
- Max Dilution
- 2 m
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-10-18T00:00:00.000Z
Reasoning: The lead grade for this interval is very low, but it is part of a broader bonanza-grade polymetallic intercept that contributes to the overall project value.
Positive factors
- Polymetallic intercept with exceptional copper and other base metals.
- Contributes to geological understanding for upcoming resource update.
Negative factors
- Lead grade (0.35%) is well below the weak threshold for lead (1%).
- Narrow intercept length (2.4m is narrow continuity).
- True width not known, potentially overstating actual thickness.
- Core loss (67% recovery) in the upper high-grade interval raises concerns about representativeness.
Evidence · table
“0.35”
Context: 2.4
Rejected tags
Rejected tags — excluded from scoring because their label or evidence could not be verified.
Apparent Width OnlyRejected · negative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Reason: The interval is given as downhole width with no true width or drill orientation, meaning apparent width may overstate true thickness.
Evidence · text
“True widths are not known.”
QA/QC DisclosedRejected · positive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Reason: The release includes QA/QC disclosure, mentioning certified lab (ALS Brisbane), QP sign-off (Thomas Bartschi), and stated methods (standards, blanks, duplicates, check assays).
Evidence · text
“QMines' QAQC program included certified reference materials, coarse blanks and quarter-core field duplicates inserted into the sample stream at routine intervals.”
Compositing TransparentRejected · positive
Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Reason: Cut-off grade (2.0% Cu) and internal dilution rules (maximum 2m) are clearly stated for reported intervals.
Evidence · text
“Included intervals are reported at 1.0% Cu and 2.0% Cu on the same basis.”
26MCDD043Mt Chalmers · copperGrade: 1.62Grade Unit: %Intercept: 3 mView all detailsHide details
Identity
- Hole ID
- 26MCDD043
- Project
- Mt Chalmers
- Commodity
- copper
- Region
- australia_qld
- Reported Region
- australia_qld
- Ticker
- QML
Geometry
- Grade
- 1.62
- Grade Unit
- %
- Intercept
- 3 m
- From
- 45 m
- To
- 48 m
- Hole Depth
- 119.8 m
- Intercept Depth
- 36.4 m
Classification
- Deposit Type
- vms
- Program
- exploration
- Sample Type
- drill
- Group ID
- 26MCDD043:45-48
- Mining Method
- underground
Location
- Easting
- 259915
- Northing
- 7421315
- Elevation
- 91.2 m
- Azimuth
- 77 °
- Dip
- -88 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Laboratories
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Deleterious
- Deleterious Flag
- No
Metal Equivalent
- Metal Eq. Grade
- 2.02
- Metal Eq. Unit
- % CuEq
- Assumptions Disclosed
- Yes
Compositing
- Cutoff Grade
- 1
- Cutoff Unit
- % Cu
- Dilution Disclosed
- Yes
- Max Dilution
- 2 m
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-10-18T00:00:00.000Z
Reasoning: This intercept shows a strong copper grade over a narrow length, contributing positively to the project's potential.
Positive factors
- Good copper grade (1.62% Cu) is strong for VMS deposit type (>=1.5% strong threshold).
- Polymetallic intercept with gold, silver, zinc, and lead credits.
- Contributes to geological understanding for upcoming resource update.
Negative factors
- Narrow intercept length (3.0m is narrow continuity).
- True width not known, potentially overstating actual thickness.
Evidence · table
“1.62”
Context: 3.0
Rejected tags
Rejected tags — excluded from scoring because their label or evidence could not be verified.
Apparent Width OnlyRejected · negative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Reason: The interval is given as downhole width with no true width or drill orientation, meaning apparent width may overstate true thickness.
Evidence · text
“True widths are not known.”
QA/QC DisclosedRejected · positive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Reason: The release includes QA/QC disclosure, mentioning certified lab (ALS Brisbane), QP sign-off (Thomas Bartschi), and stated methods (standards, blanks, duplicates, check assays).
Evidence · text
“QMines' QAQC program included certified reference materials, coarse blanks and quarter-core field duplicates inserted into the sample stream at routine intervals.”
Compositing TransparentRejected · positive
Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Reason: Cut-off grade (1.0% Cu) and internal dilution rules (maximum 2m) are clearly stated for reported intervals.
Evidence · text
“Included intervals are reported at 1.0% Cu and 2.0% Cu on the same basis.”
26MCDD043Mt Chalmers · goldGrade: 0.42Grade Unit: g/tIntercept: 3 mView all detailsHide details
Identity
- Hole ID
- 26MCDD043
- Project
- Mt Chalmers
- Commodity
- gold
- Region
- australia_qld
- Reported Region
- australia_qld
- Ticker
- QML
Geometry
- Grade
- 0.42
- Grade Unit
- g/t
- Intercept
- 3 m
- From
- 45 m
- To
- 48 m
- Hole Depth
- 119.8 m
- Intercept Depth
- 36.4 m
Classification
- Deposit Type
- vms
- Program
- exploration
- Sample Type
- drill
- Group ID
- 26MCDD043:45-48
- Mining Method
- underground
Location
- Easting
- 259915
- Northing
- 7421315
- Elevation
- 91.2 m
- Azimuth
- 77 °
- Dip
- -88 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Laboratories
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Deleterious
- Deleterious Flag
- No
Metal Equivalent
- Metal Eq. Grade
- 2.02
- Metal Eq. Unit
- % CuEq
- Assumptions Disclosed
- Yes
Compositing
- Cutoff Grade
- 1
- Cutoff Unit
- % Cu
- Dilution Disclosed
- Yes
- Max Dilution
- 2 m
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-10-18T00:00:00.000Z
Reasoning: While part of a polymetallic intercept, the gold grade for this interval is low, but still adds value to the overall project.
Positive factors
- Polymetallic intercept with strong copper and other base metals.
- Contributes to geological understanding for upcoming resource update.
Negative factors
- Gold grade (0.42 g/t) is well below the weak threshold for underground VMS (2.5 g/t).
- Narrow intercept length (3.0m is narrow continuity).
- True width not known, potentially overstating actual thickness.
Evidence · table
“0.42”
Context: 3.0
Rejected tags
Rejected tags — excluded from scoring because their label or evidence could not be verified.
Apparent Width OnlyRejected · negative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Reason: The interval is given as downhole width with no true width or drill orientation, meaning apparent width may overstate true thickness.
Evidence · text
“True widths are not known.”
QA/QC DisclosedRejected · positive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Reason: The release includes QA/QC disclosure, mentioning certified lab (ALS Brisbane), QP sign-off (Thomas Bartschi), and stated methods (standards, blanks, duplicates, check assays).
Evidence · text
“QMines' QAQC program included certified reference materials, coarse blanks and quarter-core field duplicates inserted into the sample stream at routine intervals.”
Compositing TransparentRejected · positive
Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Reason: Cut-off grade (1.0% Cu) and internal dilution rules (maximum 2m) are clearly stated for reported intervals.
Evidence · text
“Included intervals are reported at 1.0% Cu and 2.0% Cu on the same basis.”
26MCDD043Mt Chalmers · silverGrade: 5Grade Unit: g/tIntercept: 3 mView all detailsHide details
Identity
- Hole ID
- 26MCDD043
- Project
- Mt Chalmers
- Commodity
- silver
- Region
- australia_qld
- Reported Region
- australia_qld
- Ticker
- QML
Geometry
- Grade
- 5
- Grade Unit
- g/t
- Intercept
- 3 m
- From
- 45 m
- To
- 48 m
- Hole Depth
- 119.8 m
- Intercept Depth
- 36.4 m
Classification
- Deposit Type
- vms
- Program
- exploration
- Sample Type
- drill
- Group ID
- 26MCDD043:45-48
- Mining Method
- underground
Location
- Easting
- 259915
- Northing
- 7421315
- Elevation
- 91.2 m
- Azimuth
- 77 °
- Dip
- -88 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Laboratories
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Deleterious
- Deleterious Flag
- No
Metal Equivalent
- Metal Eq. Grade
- 2.02
- Metal Eq. Unit
- % CuEq
- Assumptions Disclosed
- Yes
Compositing
- Cutoff Grade
- 1
- Cutoff Unit
- % Cu
- Dilution Disclosed
- Yes
- Max Dilution
- 2 m
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-10-18T00:00:00.000Z
Reasoning: The silver grade for this interval is low, but it is part of a broader polymetallic intercept that contributes to the overall project value.
Positive factors
- Polymetallic intercept with strong copper and other base metals.
- Contributes to geological understanding for upcoming resource update.
Negative factors
- Silver grade (5 g/t) is well below the weak threshold for silver (30 g/t).
- Narrow intercept length (3.0m is narrow continuity).
- True width not known, potentially overstating actual thickness.
Evidence · table
“5”
Context: 3.0
Rejected tags
Rejected tags — excluded from scoring because their label or evidence could not be verified.
Apparent Width OnlyRejected · negative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Reason: The interval is given as downhole width with no true width or drill orientation, meaning apparent width may overstate true thickness.
Evidence · text
“True widths are not known.”
QA/QC DisclosedRejected · positive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Reason: The release includes QA/QC disclosure, mentioning certified lab (ALS Brisbane), QP sign-off (Thomas Bartschi), and stated methods (standards, blanks, duplicates, check assays).
Evidence · text
“QMines' QAQC program included certified reference materials, coarse blanks and quarter-core field duplicates inserted into the sample stream at routine intervals.”
Compositing TransparentRejected · positive
Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Reason: Cut-off grade (1.0% Cu) and internal dilution rules (maximum 2m) are clearly stated for reported intervals.
Evidence · text
“Included intervals are reported at 1.0% Cu and 2.0% Cu on the same basis.”
26MCDD043Mt Chalmers · zincGrade: 0.05Grade Unit: %Intercept: 3 mView all detailsHide details
Identity
- Hole ID
- 26MCDD043
- Project
- Mt Chalmers
- Commodity
- zinc
- Region
- australia_qld
- Reported Region
- australia_qld
- Ticker
- QML
Geometry
- Grade
- 0.05
- Grade Unit
- %
- Intercept
- 3 m
- From
- 45 m
- To
- 48 m
- Hole Depth
- 119.8 m
- Intercept Depth
- 36.4 m
Classification
- Deposit Type
- vms
- Program
- exploration
- Sample Type
- drill
- Group ID
- 26MCDD043:45-48
- Mining Method
- underground
Location
- Easting
- 259915
- Northing
- 7421315
- Elevation
- 91.2 m
- Azimuth
- 77 °
- Dip
- -88 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Laboratories
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Deleterious
- Deleterious Flag
- No
Metal Equivalent
- Metal Eq. Grade
- 2.02
- Metal Eq. Unit
- % CuEq
- Assumptions Disclosed
- Yes
Compositing
- Cutoff Grade
- 1
- Cutoff Unit
- % Cu
- Dilution Disclosed
- Yes
- Max Dilution
- 2 m
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-10-18T00:00:00.000Z
Reasoning: The zinc grade for this interval is very low, but it is part of a broader polymetallic intercept that contributes to the overall project value.
Positive factors
- Polymetallic intercept with strong copper and other base metals.
- Contributes to geological understanding for upcoming resource update.
Negative factors
- Zinc grade (0.05%) is well below the weak threshold for VMS zinc (2%).
- Narrow intercept length (3.0m is narrow continuity).
- True width not known, potentially overstating actual thickness.
Evidence · table
“0.05”
Context: 3.0
Rejected tags
Rejected tags — excluded from scoring because their label or evidence could not be verified.
Apparent Width OnlyRejected · negative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Reason: The interval is given as downhole width with no true width or drill orientation, meaning apparent width may overstate true thickness.
Evidence · text
“True widths are not known.”
QA/QC DisclosedRejected · positive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Reason: The release includes QA/QC disclosure, mentioning certified lab (ALS Brisbane), QP sign-off (Thomas Bartschi), and stated methods (standards, blanks, duplicates, check assays).
Evidence · text
“QMines' QAQC program included certified reference materials, coarse blanks and quarter-core field duplicates inserted into the sample stream at routine intervals.”
Compositing TransparentRejected · positive
Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Reason: Cut-off grade (1.0% Cu) and internal dilution rules (maximum 2m) are clearly stated for reported intervals.
Evidence · text
“Included intervals are reported at 1.0% Cu and 2.0% Cu on the same basis.”
26MCDD043Mt Chalmers · leadGrade: 0.03Grade Unit: %Intercept: 3 mView all detailsHide details
Identity
- Hole ID
- 26MCDD043
- Project
- Mt Chalmers
- Commodity
- lead
- Region
- australia_qld
- Reported Region
- australia_qld
- Ticker
- QML
Geometry
- Grade
- 0.03
- Grade Unit
- %
- Intercept
- 3 m
- From
- 45 m
- To
- 48 m
- Hole Depth
- 119.8 m
- Intercept Depth
- 36.4 m
Classification
- Deposit Type
- vms
- Program
- exploration
- Sample Type
- drill
- Group ID
- 26MCDD043:45-48
- Mining Method
- underground
Location
- Easting
- 259915
- Northing
- 7421315
- Elevation
- 91.2 m
- Azimuth
- 77 °
- Dip
- -88 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Laboratories
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Deleterious
- Deleterious Flag
- No
Metal Equivalent
- Metal Eq. Grade
- 2.02
- Metal Eq. Unit
- % CuEq
- Assumptions Disclosed
- Yes
Compositing
- Cutoff Grade
- 1
- Cutoff Unit
- % Cu
- Dilution Disclosed
- Yes
- Max Dilution
- 2 m
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-10-18T00:00:00.000Z
Reasoning: The lead grade for this interval is very low, but it is part of a broader polymetallic intercept that contributes to the overall project value.
Positive factors
- Polymetallic intercept with strong copper and other base metals.
- Contributes to geological understanding for upcoming resource update.
Negative factors
- Lead grade (0.03%) is well below the weak threshold for lead (1%).
- Narrow intercept length (3.0m is narrow continuity).
- True width not known, potentially overstating actual thickness.
Evidence · table
“0.03”
Context: 3.0
Rejected tags
Rejected tags — excluded from scoring because their label or evidence could not be verified.
Apparent Width OnlyRejected · negative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Reason: The interval is given as downhole width with no true width or drill orientation, meaning apparent width may overstate true thickness.
Evidence · text
“True widths are not known.”
QA/QC DisclosedRejected · positive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Reason: The release includes QA/QC disclosure, mentioning certified lab (ALS Brisbane), QP sign-off (Thomas Bartschi), and stated methods (standards, blanks, duplicates, check assays).
Evidence · text
“QMines' QAQC program included certified reference materials, coarse blanks and quarter-core field duplicates inserted into the sample stream at routine intervals.”
Compositing TransparentRejected · positive
Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Reason: Cut-off grade (1.0% Cu) and internal dilution rules (maximum 2m) are clearly stated for reported intervals.
Evidence · text
“Included intervals are reported at 1.0% Cu and 2.0% Cu on the same basis.”
26MCDD043Mt Chalmers · copperGrade: 1.61Grade Unit: %Intercept: 1 mView all detailsHide details
Identity
- Hole ID
- 26MCDD043
- Project
- Mt Chalmers
- Commodity
- copper
- Region
- australia_qld
- Reported Region
- australia_qld
- Ticker
- QML
Geometry
- Grade
- 1.61
- Grade Unit
- %
- Intercept
- 1 m
- From
- 52 m
- To
- 53 m
- Hole Depth
- 119.8 m
- Intercept Depth
- 36.4 m
Classification
- Deposit Type
- vms
- Program
- exploration
- Sample Type
- drill
- Group ID
- 26MCDD043:52-53
- Mining Method
- underground
Location
- Easting
- 259915
- Northing
- 7421315
- Elevation
- 91.2 m
- Azimuth
- 77 °
- Dip
- -88 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Laboratories
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Deleterious
- Deleterious Flag
- No
Metal Equivalent
- Metal Eq. Grade
- 2
- Metal Eq. Unit
- % CuEq
- Assumptions Disclosed
- Yes
Compositing
- Cutoff Grade
- 1
- Cutoff Unit
- % Cu
- Dilution Disclosed
- Yes
- Max Dilution
- 2 m
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-10-18T00:00:00.000Z
Reasoning: This intercept shows a strong copper grade over a very narrow length, contributing positively to the project's potential.
Positive factors
- Good copper grade (1.61% Cu) is strong for VMS deposit type (>=1.5% strong threshold).
- Polymetallic intercept with gold, silver, zinc, and lead credits.
- Contributes to geological understanding for upcoming resource update.
Negative factors
- Very narrow intercept length (1.0m is narrow continuity).
- True width not known, potentially overstating actual thickness.
Evidence · table
“1.61”
Context: 1.0
Rejected tags
Rejected tags — excluded from scoring because their label or evidence could not be verified.
Apparent Width OnlyRejected · negative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Reason: The interval is given as downhole width with no true width or drill orientation, meaning apparent width may overstate true thickness.
Evidence · text
“True widths are not known.”
QA/QC DisclosedRejected · positive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Reason: The release includes QA/QC disclosure, mentioning certified lab (ALS Brisbane), QP sign-off (Thomas Bartschi), and stated methods (standards, blanks, duplicates, check assays).
Evidence · text
“QMines' QAQC program included certified reference materials, coarse blanks and quarter-core field duplicates inserted into the sample stream at routine intervals.”
Compositing TransparentRejected · positive
Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Reason: Cut-off grade (1.0% Cu) and internal dilution rules (maximum 2m) are clearly stated for reported intervals.
Evidence · text
“Included intervals are reported at 1.0% Cu and 2.0% Cu on the same basis.”
26MCDD043Mt Chalmers · goldGrade: 0.4Grade Unit: g/tIntercept: 1 mView all detailsHide details
Identity
- Hole ID
- 26MCDD043
- Project
- Mt Chalmers
- Commodity
- gold
- Region
- australia_qld
- Reported Region
- australia_qld
- Ticker
- QML
Geometry
- Grade
- 0.4
- Grade Unit
- g/t
- Intercept
- 1 m
- From
- 52 m
- To
- 53 m
- Hole Depth
- 119.8 m
- Intercept Depth
- 36.4 m
Classification
- Deposit Type
- vms
- Program
- exploration
- Sample Type
- drill
- Group ID
- 26MCDD043:52-53
- Mining Method
- underground
Location
- Easting
- 259915
- Northing
- 7421315
- Elevation
- 91.2 m
- Azimuth
- 77 °
- Dip
- -88 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Laboratories
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Deleterious
- Deleterious Flag
- No
Metal Equivalent
- Metal Eq. Grade
- 2
- Metal Eq. Unit
- % CuEq
- Assumptions Disclosed
- Yes
Compositing
- Cutoff Grade
- 1
- Cutoff Unit
- % Cu
- Dilution Disclosed
- Yes
- Max Dilution
- 2 m
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-10-18T00:00:00.000Z
Reasoning: While part of a polymetallic intercept, the gold grade for this interval is low, but still adds value to the overall project.
Positive factors
- Polymetallic intercept with strong copper and other base metals.
- Contributes to geological understanding for upcoming resource update.
Negative factors
- Gold grade (0.40 g/t) is well below the weak threshold for underground VMS (2.5 g/t).
- Very narrow intercept length (1.0m is narrow continuity).
- True width not known, potentially overstating actual thickness.
Evidence · table
“0.40”
Context: 1.0
Rejected tags
Rejected tags — excluded from scoring because their label or evidence could not be verified.
Apparent Width OnlyRejected · negative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Reason: The interval is given as downhole width with no true width or drill orientation, meaning apparent width may overstate true thickness.
Evidence · text
“True widths are not known.”
QA/QC DisclosedRejected · positive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Reason: The release includes QA/QC disclosure, mentioning certified lab (ALS Brisbane), QP sign-off (Thomas Bartschi), and stated methods (standards, blanks, duplicates, check assays).
Evidence · text
“QMines' QAQC program included certified reference materials, coarse blanks and quarter-core field duplicates inserted into the sample stream at routine intervals.”
Compositing TransparentRejected · positive
Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Reason: Cut-off grade (1.0% Cu) and internal dilution rules (maximum 2m) are clearly stated for reported intervals.
Evidence · text
“Included intervals are reported at 1.0% Cu and 2.0% Cu on the same basis.”
26MCDD043Mt Chalmers · silverGrade: 4Grade Unit: g/tIntercept: 1 mView all detailsHide details
Identity
- Hole ID
- 26MCDD043
- Project
- Mt Chalmers
- Commodity
- silver
- Region
- australia_qld
- Reported Region
- australia_qld
- Ticker
- QML
Geometry
- Grade
- 4
- Grade Unit
- g/t
- Intercept
- 1 m
- From
- 52 m
- To
- 53 m
- Hole Depth
- 119.8 m
- Intercept Depth
- 36.4 m
Classification
- Deposit Type
- vms
- Program
- exploration
- Sample Type
- drill
- Group ID
- 26MCDD043:52-53
- Mining Method
- underground
Location
- Easting
- 259915
- Northing
- 7421315
- Elevation
- 91.2 m
- Azimuth
- 77 °
- Dip
- -88 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Laboratories
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Deleterious
- Deleterious Flag
- No
Metal Equivalent
- Metal Eq. Grade
- 2
- Metal Eq. Unit
- % CuEq
- Assumptions Disclosed
- Yes
Compositing
- Cutoff Grade
- 1
- Cutoff Unit
- % Cu
- Dilution Disclosed
- Yes
- Max Dilution
- 2 m
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-10-18T00:00:00.000Z
Reasoning: The silver grade for this interval is low, but it is part of a broader polymetallic intercept that contributes to the overall project value.
Positive factors
- Polymetallic intercept with strong copper and other base metals.
- Contributes to geological understanding for upcoming resource update.
Negative factors
- Silver grade (4 g/t) is well below the weak threshold for silver (30 g/t).
- Very narrow intercept length (1.0m is narrow continuity).
- True width not known, potentially overstating actual thickness.
Evidence · table
“4”
Context: 1.0
Rejected tags
Rejected tags — excluded from scoring because their label or evidence could not be verified.
Apparent Width OnlyRejected · negative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Reason: The interval is given as downhole width with no true width or drill orientation, meaning apparent width may overstate true thickness.
Evidence · text
“True widths are not known.”
QA/QC DisclosedRejected · positive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Reason: The release includes QA/QC disclosure, mentioning certified lab (ALS Brisbane), QP sign-off (Thomas Bartschi), and stated methods (standards, blanks, duplicates, check assays).
Evidence · text
“QMines' QAQC program included certified reference materials, coarse blanks and quarter-core field duplicates inserted into the sample stream at routine intervals.”
Compositing TransparentRejected · positive
Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Reason: Cut-off grade (1.0% Cu) and internal dilution rules (maximum 2m) are clearly stated for reported intervals.
Evidence · text
“Included intervals are reported at 1.0% Cu and 2.0% Cu on the same basis.”
26MCDD043Mt Chalmers · zincGrade: 0.1Grade Unit: %Intercept: 1 mView all detailsHide details
Identity
- Hole ID
- 26MCDD043
- Project
- Mt Chalmers
- Commodity
- zinc
- Region
- australia_qld
- Reported Region
- australia_qld
- Ticker
- QML
Geometry
- Grade
- 0.1
- Grade Unit
- %
- Intercept
- 1 m
- From
- 52 m
- To
- 53 m
- Hole Depth
- 119.8 m
- Intercept Depth
- 36.4 m
Classification
- Deposit Type
- vms
- Program
- exploration
- Sample Type
- drill
- Group ID
- 26MCDD043:52-53
- Mining Method
- underground
Location
- Easting
- 259915
- Northing
- 7421315
- Elevation
- 91.2 m
- Azimuth
- 77 °
- Dip
- -88 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Laboratories
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Deleterious
- Deleterious Flag
- No
Metal Equivalent
- Metal Eq. Grade
- 2
- Metal Eq. Unit
- % CuEq
- Assumptions Disclosed
- Yes
Compositing
- Cutoff Grade
- 1
- Cutoff Unit
- % Cu
- Dilution Disclosed
- Yes
- Max Dilution
- 2 m
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-10-18T00:00:00.000Z
Reasoning: The zinc grade for this interval is very low, but it is part of a broader polymetallic intercept that contributes to the overall project value.
Positive factors
- Polymetallic intercept with strong copper and other base metals.
- Contributes to geological understanding for upcoming resource update.
Negative factors
- Zinc grade (0.10%) is well below the weak threshold for VMS zinc (2%).
- Very narrow intercept length (1.0m is narrow continuity).
- True width not known, potentially overstating actual thickness.
Evidence · table
“0.10”
Context: 1.0
Rejected tags
Rejected tags — excluded from scoring because their label or evidence could not be verified.
Apparent Width OnlyRejected · negative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Reason: The interval is given as downhole width with no true width or drill orientation, meaning apparent width may overstate true thickness.
Evidence · text
“True widths are not known.”
QA/QC DisclosedRejected · positive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Reason: The release includes QA/QC disclosure, mentioning certified lab (ALS Brisbane), QP sign-off (Thomas Bartschi), and stated methods (standards, blanks, duplicates, check assays).
Evidence · text
“QMines' QAQC program included certified reference materials, coarse blanks and quarter-core field duplicates inserted into the sample stream at routine intervals.”
Compositing TransparentRejected · positive
Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Reason: Cut-off grade (1.0% Cu) and internal dilution rules (maximum 2m) are clearly stated for reported intervals.
Evidence · text
“Included intervals are reported at 1.0% Cu and 2.0% Cu on the same basis.”
26MCDD043Mt Chalmers · leadGrade: 0.02Grade Unit: %Intercept: 1 mView all detailsHide details
Identity
- Hole ID
- 26MCDD043
- Project
- Mt Chalmers
- Commodity
- lead
- Region
- australia_qld
- Reported Region
- australia_qld
- Ticker
- QML
Geometry
- Grade
- 0.02
- Grade Unit
- %
- Intercept
- 1 m
- From
- 52 m
- To
- 53 m
- Hole Depth
- 119.8 m
- Intercept Depth
- 36.4 m
Classification
- Deposit Type
- vms
- Program
- exploration
- Sample Type
- drill
- Group ID
- 26MCDD043:52-53
- Mining Method
- underground
Location
- Easting
- 259915
- Northing
- 7421315
- Elevation
- 91.2 m
- Azimuth
- 77 °
- Dip
- -88 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Laboratories
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Deleterious
- Deleterious Flag
- No
Metal Equivalent
- Metal Eq. Grade
- 2
- Metal Eq. Unit
- % CuEq
- Assumptions Disclosed
- Yes
Compositing
- Cutoff Grade
- 1
- Cutoff Unit
- % Cu
- Dilution Disclosed
- Yes
- Max Dilution
- 2 m
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-10-18T00:00:00.000Z
Reasoning: The lead grade for this interval is very low, but it is part of a broader polymetallic intercept that contributes to the overall project value.
Positive factors
- Polymetallic intercept with strong copper and other base metals.
- Contributes to geological understanding for upcoming resource update.
Negative factors
- Lead grade (0.02%) is well below the weak threshold for lead (1%).
- Very narrow intercept length (1.0m is narrow continuity).
- True width not known, potentially overstating actual thickness.
Evidence · table
“0.02”
Context: 1.0
Rejected tags
Rejected tags — excluded from scoring because their label or evidence could not be verified.
Apparent Width OnlyRejected · negative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Reason: The interval is given as downhole width with no true width or drill orientation, meaning apparent width may overstate true thickness.
Evidence · text
“True widths are not known.”
QA/QC DisclosedRejected · positive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Reason: The release includes QA/QC disclosure, mentioning certified lab (ALS Brisbane), QP sign-off (Thomas Bartschi), and stated methods (standards, blanks, duplicates, check assays).
Evidence · text
“QMines' QAQC program included certified reference materials, coarse blanks and quarter-core field duplicates inserted into the sample stream at routine intervals.”
Compositing TransparentRejected · positive
Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Reason: Cut-off grade (1.0% Cu) and internal dilution rules (maximum 2m) are clearly stated for reported intervals.
Evidence · text
“Included intervals are reported at 1.0% Cu and 2.0% Cu on the same basis.”
26MCDD043Mt Chalmers · copperGrade: 1.02Grade Unit: %Intercept: 6.6 mView all detailsHide details
Identity
- Hole ID
- 26MCDD043
- Project
- Mt Chalmers
- Commodity
- copper
- Region
- australia_qld
- Reported Region
- australia_qld
- Ticker
- QML
Geometry
- Grade
- 1.02
- Grade Unit
- %
- Intercept
- 6.6 m
- From
- 56 m
- To
- 62.6 m
- Hole Depth
- 119.8 m
- Intercept Depth
- 36.4 m
Classification
- Deposit Type
- vms
- Program
- exploration
- Sample Type
- drill
- Group ID
- 26MCDD043:56-62.6
- Mining Method
- underground
Location
- Easting
- 259915
- Northing
- 7421315
- Elevation
- 91.2 m
- Azimuth
- 77 °
- Dip
- -88 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Laboratories
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Deleterious
- Deleterious Flag
- No
Metal Equivalent
- Metal Eq. Grade
- 1.27
- Metal Eq. Unit
- % CuEq
- Assumptions Disclosed
- Yes
Compositing
- Cutoff Grade
- 1
- Cutoff Unit
- % Cu
- Dilution Disclosed
- Yes
- Max Dilution
- 2 m
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-10-18T00:00:00.000Z
Reasoning: This intercept shows a moderate copper grade over a moderate length, contributing positively to the project's potential.
Positive factors
- Good copper grade (1.02% Cu) is moderate for VMS deposit type (>=0.8% moderate threshold).
- Polymetallic intercept with gold, silver, zinc, and lead credits.
- Contributes to geological understanding for upcoming resource update.
Negative factors
- True width not known, potentially overstating actual thickness.
Evidence · table
“1.02”
Context: 6.6
Rejected tags
Rejected tags — excluded from scoring because their label or evidence could not be verified.
Apparent Width OnlyRejected · negative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Reason: The interval is given as downhole width with no true width or drill orientation, meaning apparent width may overstate true thickness.
Evidence · text
“True widths are not known.”
QA/QC DisclosedRejected · positive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Reason: The release includes QA/QC disclosure, mentioning certified lab (ALS Brisbane), QP sign-off (Thomas Bartschi), and stated methods (standards, blanks, duplicates, check assays).
Evidence · text
“QMines' QAQC program included certified reference materials, coarse blanks and quarter-core field duplicates inserted into the sample stream at routine intervals.”
Compositing TransparentRejected · positive
Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Reason: Cut-off grade (1.0% Cu) and internal dilution rules (maximum 2m) are clearly stated for reported intervals.
Evidence · text
“Included intervals are reported at 1.0% Cu and 2.0% Cu on the same basis.”
26MCDD043Mt Chalmers · goldGrade: 0.25Grade Unit: g/tIntercept: 6.6 mView all detailsHide details
Identity
- Hole ID
- 26MCDD043
- Project
- Mt Chalmers
- Commodity
- gold
- Region
- australia_qld
- Reported Region
- australia_qld
- Ticker
- QML
Geometry
- Grade
- 0.25
- Grade Unit
- g/t
- Intercept
- 6.6 m
- From
- 56 m
- To
- 62.6 m
- Hole Depth
- 119.8 m
- Intercept Depth
- 36.4 m
Classification
- Deposit Type
- vms
- Program
- exploration
- Sample Type
- drill
- Group ID
- 26MCDD043:56-62.6
- Mining Method
- underground
Location
- Easting
- 259915
- Northing
- 7421315
- Elevation
- 91.2 m
- Azimuth
- 77 °
- Dip
- -88 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Laboratories
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Deleterious
- Deleterious Flag
- No
Metal Equivalent
- Metal Eq. Grade
- 1.27
- Metal Eq. Unit
- % CuEq
- Assumptions Disclosed
- Yes
Compositing
- Cutoff Grade
- 1
- Cutoff Unit
- % Cu
- Dilution Disclosed
- Yes
- Max Dilution
- 2 m
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-10-18T00:00:00.000Z
Reasoning: While part of a polymetallic intercept, the gold grade for this interval is low, but still adds value to the overall project.
Positive factors
- Polymetallic intercept with moderate copper and other base metals.
- Contributes to geological understanding for upcoming resource update.
Negative factors
- Gold grade (0.25 g/t) is well below the weak threshold for underground VMS (2.5 g/t).
- True width not known, potentially overstating actual thickness.
Evidence · table
“0.25”
Context: 6.6
Rejected tags
Rejected tags — excluded from scoring because their label or evidence could not be verified.
Apparent Width OnlyRejected · negative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Reason: The interval is given as downhole width with no true width or drill orientation, meaning apparent width may overstate true thickness.
Evidence · text
“True widths are not known.”
QA/QC DisclosedRejected · positive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Reason: The release includes QA/QC disclosure, mentioning certified lab (ALS Brisbane), QP sign-off (Thomas Bartschi), and stated methods (standards, blanks, duplicates, check assays).
Evidence · text
“QMines' QAQC program included certified reference materials, coarse blanks and quarter-core field duplicates inserted into the sample stream at routine intervals.”
Compositing TransparentRejected · positive
Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Reason: Cut-off grade (1.0% Cu) and internal dilution rules (maximum 2m) are clearly stated for reported intervals.
Evidence · text
“Included intervals are reported at 1.0% Cu and 2.0% Cu on the same basis.”
26MCDD043Mt Chalmers · silverGrade: 2Grade Unit: g/tIntercept: 6.6 mView all detailsHide details
Identity
- Hole ID
- 26MCDD043
- Project
- Mt Chalmers
- Commodity
- silver
- Region
- australia_qld
- Reported Region
- australia_qld
- Ticker
- QML
Geometry
- Grade
- 2
- Grade Unit
- g/t
- Intercept
- 6.6 m
- From
- 56 m
- To
- 62.6 m
- Hole Depth
- 119.8 m
- Intercept Depth
- 36.4 m
Classification
- Deposit Type
- vms
- Program
- exploration
- Sample Type
- drill
- Group ID
- 26MCDD043:56-62.6
- Mining Method
- underground
Location
- Easting
- 259915
- Northing
- 7421315
- Elevation
- 91.2 m
- Azimuth
- 77 °
- Dip
- -88 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Laboratories
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Deleterious
- Deleterious Flag
- No
Metal Equivalent
- Metal Eq. Grade
- 1.27
- Metal Eq. Unit
- % CuEq
- Assumptions Disclosed
- Yes
Compositing
- Cutoff Grade
- 1
- Cutoff Unit
- % Cu
- Dilution Disclosed
- Yes
- Max Dilution
- 2 m
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-10-18T00:00:00.000Z
Reasoning: The silver grade for this interval is low, but it is part of a broader polymetallic intercept that contributes to the overall project value.
Positive factors
- Polymetallic intercept with moderate copper and other base metals.
- Contributes to geological understanding for upcoming resource update.
Negative factors
- Silver grade (2 g/t) is well below the weak threshold for silver (30 g/t).
- True width not known, potentially overstating actual thickness.
Evidence · table
“2”
Context: 6.6
Rejected tags
Rejected tags — excluded from scoring because their label or evidence could not be verified.
Apparent Width OnlyRejected · negative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Reason: The interval is given as downhole width with no true width or drill orientation, meaning apparent width may overstate true thickness.
Evidence · text
“True widths are not known.”
QA/QC DisclosedRejected · positive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Reason: The release includes QA/QC disclosure, mentioning certified lab (ALS Brisbane), QP sign-off (Thomas Bartschi), and stated methods (standards, blanks, duplicates, check assays).
Evidence · text
“QMines' QAQC program included certified reference materials, coarse blanks and quarter-core field duplicates inserted into the sample stream at routine intervals.”
Compositing TransparentRejected · positive
Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Reason: Cut-off grade (1.0% Cu) and internal dilution rules (maximum 2m) are clearly stated for reported intervals.
Evidence · text
“Included intervals are reported at 1.0% Cu and 2.0% Cu on the same basis.”
26MCDD043Mt Chalmers · zincGrade: 0.04Grade Unit: %Intercept: 6.6 mView all detailsHide details
Identity
- Hole ID
- 26MCDD043
- Project
- Mt Chalmers
- Commodity
- zinc
- Region
- australia_qld
- Reported Region
- australia_qld
- Ticker
- QML
Geometry
- Grade
- 0.04
- Grade Unit
- %
- Intercept
- 6.6 m
- From
- 56 m
- To
- 62.6 m
- Hole Depth
- 119.8 m
- Intercept Depth
- 36.4 m
Classification
- Deposit Type
- vms
- Program
- exploration
- Sample Type
- drill
- Group ID
- 26MCDD043:56-62.6
- Mining Method
- underground
Location
- Easting
- 259915
- Northing
- 7421315
- Elevation
- 91.2 m
- Azimuth
- 77 °
- Dip
- -88 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Laboratories
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Deleterious
- Deleterious Flag
- No
Metal Equivalent
- Metal Eq. Grade
- 1.27
- Metal Eq. Unit
- % CuEq
- Assumptions Disclosed
- Yes
Compositing
- Cutoff Grade
- 1
- Cutoff Unit
- % Cu
- Dilution Disclosed
- Yes
- Max Dilution
- 2 m
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-10-18T00:00:00.000Z
Reasoning: The zinc grade for this interval is very low, but it is part of a broader polymetallic intercept that contributes to the overall project value.
Positive factors
- Polymetallic intercept with moderate copper and other base metals.
- Contributes to geological understanding for upcoming resource update.
Negative factors
- Zinc grade (0.04%) is well below the weak threshold for VMS zinc (2%).
- True width not known, potentially overstating actual thickness.
Evidence · table
“0.04”
Context: 6.6
Rejected tags
Rejected tags — excluded from scoring because their label or evidence could not be verified.
Apparent Width OnlyRejected · negative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Reason: The interval is given as downhole width with no true width or drill orientation, meaning apparent width may overstate true thickness.
Evidence · text
“True widths are not known.”
QA/QC DisclosedRejected · positive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Reason: The release includes QA/QC disclosure, mentioning certified lab (ALS Brisbane), QP sign-off (Thomas Bartschi), and stated methods (standards, blanks, duplicates, check assays).
Evidence · text
“QMines' QAQC program included certified reference materials, coarse blanks and quarter-core field duplicates inserted into the sample stream at routine intervals.”
Compositing TransparentRejected · positive
Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Reason: Cut-off grade (1.0% Cu) and internal dilution rules (maximum 2m) are clearly stated for reported intervals.
Evidence · text
“Included intervals are reported at 1.0% Cu and 2.0% Cu on the same basis.”
26MCDD043Mt Chalmers · leadGrade: 0.02Grade Unit: %Intercept: 6.6 mView all detailsHide details
Identity
- Hole ID
- 26MCDD043
- Project
- Mt Chalmers
- Commodity
- lead
- Region
- australia_qld
- Reported Region
- australia_qld
- Ticker
- QML
Geometry
- Grade
- 0.02
- Grade Unit
- %
- Intercept
- 6.6 m
- From
- 56 m
- To
- 62.6 m
- Hole Depth
- 119.8 m
- Intercept Depth
- 36.4 m
Classification
- Deposit Type
- vms
- Program
- exploration
- Sample Type
- drill
- Group ID
- 26MCDD043:56-62.6
- Mining Method
- underground
Location
- Easting
- 259915
- Northing
- 7421315
- Elevation
- 91.2 m
- Azimuth
- 77 °
- Dip
- -88 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Laboratories
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Deleterious
- Deleterious Flag
- No
Metal Equivalent
- Metal Eq. Grade
- 1.27
- Metal Eq. Unit
- % CuEq
- Assumptions Disclosed
- Yes
Compositing
- Cutoff Grade
- 1
- Cutoff Unit
- % Cu
- Dilution Disclosed
- Yes
- Max Dilution
- 2 m
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-10-18T00:00:00.000Z
Reasoning: The lead grade for this interval is very low, but it is part of a broader polymetallic intercept that contributes to the overall project value.
Positive factors
- Polymetallic intercept with moderate copper and other base metals.
- Contributes to geological understanding for upcoming resource update.
Negative factors
- Lead grade (0.02%) is well below the weak threshold for lead (1%).
- True width not known, potentially overstating actual thickness.
Evidence · table
“0.02”
Context: 6.6
Rejected tags
Rejected tags — excluded from scoring because their label or evidence could not be verified.
Apparent Width OnlyRejected · negative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Reason: The interval is given as downhole width with no true width or drill orientation, meaning apparent width may overstate true thickness.
Evidence · text
“True widths are not known.”
QA/QC DisclosedRejected · positive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Reason: The release includes QA/QC disclosure, mentioning certified lab (ALS Brisbane), QP sign-off (Thomas Bartschi), and stated methods (standards, blanks, duplicates, check assays).
Evidence · text
“QMines' QAQC program included certified reference materials, coarse blanks and quarter-core field duplicates inserted into the sample stream at routine intervals.”
Compositing TransparentRejected · positive
Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Reason: Cut-off grade (1.0% Cu) and internal dilution rules (maximum 2m) are clearly stated for reported intervals.
Evidence · text
“Included intervals are reported at 1.0% Cu and 2.0% Cu on the same basis.”
26MCDD043Mt Chalmers · zincGrade: 1.21Grade Unit: %Intercept: 2.7 mView all detailsHide details
Identity
- Hole ID
- 26MCDD043
- Project
- Mt Chalmers
- Commodity
- zinc
- Region
- australia_qld
- Reported Region
- australia_qld
- Ticker
- QML
Geometry
- Grade
- 1.21
- Grade Unit
- %
- Intercept
- 2.7 m
- From
- 36.4 m
- To
- 39.1 m
- Hole Depth
- 119.8 m
- Intercept Depth
- 36.4 m
Classification
- Deposit Type
- vms
- Program
- exploration
- Sample Type
- drill
- Group ID
- 26MCDD043:36.4-39.1
- Mining Method
- underground
Location
- Easting
- 259915
- Northing
- 7421315
- Elevation
- 91.2 m
- Azimuth
- 77 °
- Dip
- -88 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Laboratories
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Deleterious
- Deleterious Flag
- No
Metal Equivalent
- Metal Eq. Grade
- 7.19
- Metal Eq. Unit
- % CuEq
- Assumptions Disclosed
- Yes
Compositing
- Cutoff Grade
- 1
- Cutoff Unit
- % Zn
- Dilution Disclosed
- Yes
- Max Dilution
- 2 m
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-10-18T00:00:00.000Z
Reasoning: The zinc grade for this interval is low, but it is part of a broader high-grade polymetallic intercept that contributes to the overall project value.
Positive factors
- Polymetallic intercept with high copper and gold grades.
- Contributes to geological understanding for upcoming resource update.
Negative factors
- Zinc grade (1.21%) is below the weak threshold for VMS zinc (2%).
- Narrow intercept length (2.7m is narrow continuity).
- True width not known, potentially overstating actual thickness.
- Core loss (67% recovery) in the upper high-grade interval raises concerns about representativeness.
Evidence · table
“1.21”
Context: 2.7
Rejected tags
Rejected tags — excluded from scoring because their label or evidence could not be verified.
Apparent Width OnlyRejected · negative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Reason: The interval is given as downhole width with no true width or drill orientation, meaning apparent width may overstate true thickness.
Evidence · text
“True widths are not known.”
QA/QC DisclosedRejected · positive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Reason: The release includes QA/QC disclosure, mentioning certified lab (ALS Brisbane), QP sign-off (Thomas Bartschi), and stated methods (standards, blanks, duplicates, check assays).
Evidence · text
“QMines' QAQC program included certified reference materials, coarse blanks and quarter-core field duplicates inserted into the sample stream at routine intervals.”
Compositing TransparentRejected · positive
Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Reason: Cut-off grade (1.0% Zn) and internal dilution rules (maximum 2m) are clearly stated for reported intervals.
Evidence · text
“(Zn) denotes intervals at a 1.0% Zn lower cut off and (Au) intervals at a 0.2g/t Au lower cut off, both with a maximum of 2m internal dilution.”
26MCDD043Mt Chalmers · copperGrade: 3.67Grade Unit: %Intercept: 2.7 mView all detailsHide details
Identity
- Hole ID
- 26MCDD043
- Project
- Mt Chalmers
- Commodity
- copper
- Region
- australia_qld
- Reported Region
- australia_qld
- Ticker
- QML
Geometry
- Grade
- 3.67
- Grade Unit
- %
- Intercept
- 2.7 m
- From
- 36.4 m
- To
- 39.1 m
- Hole Depth
- 119.8 m
- Intercept Depth
- 36.4 m
Classification
- Deposit Type
- vms
- Program
- exploration
- Sample Type
- drill
- Group ID
- 26MCDD043:36.4-39.1
- Mining Method
- underground
Location
- Easting
- 259915
- Northing
- 7421315
- Elevation
- 91.2 m
- Azimuth
- 77 °
- Dip
- -88 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Laboratories
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Deleterious
- Deleterious Flag
- No
Metal Equivalent
- Metal Eq. Grade
- 7.19
- Metal Eq. Unit
- % CuEq
- Assumptions Disclosed
- Yes
Compositing
- Cutoff Grade
- 1
- Cutoff Unit
- % Zn
- Dilution Disclosed
- Yes
- Max Dilution
- 2 m
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-10-18T00:00:00.000Z
Reasoning: This intercept shows an exceptional copper grade, significantly enhancing the project's potential, despite its narrow width and unknown true width.
Positive factors
- High copper grade (3.67% Cu) is exceptional for VMS deposit type (>=2.5% exceptional threshold).
- Polymetallic intercept with strong gold and silver credits.
- Contributes to geological understanding for upcoming resource update.
Negative factors
- Narrow intercept length (2.7m is narrow continuity).
- True width not known, potentially overstating actual thickness.
- Core loss (67% recovery) in the upper high-grade interval raises concerns about representativeness.
Evidence · table
“3.67”
Context: 2.7
Rejected tags
Rejected tags — excluded from scoring because their label or evidence could not be verified.
Bonanza InterceptRejected · positive
Exceptionally high-grade zone, well above the deposit-type norm.
Reason: The copper grade of 3.67% is exceptional for a VMS deposit, exceeding the 2.5% exceptional threshold.
Evidence · table
“3.67”
Context: 2.7
Apparent Width OnlyRejected · negative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Reason: The interval is given as downhole width with no true width or drill orientation, meaning apparent width may overstate true thickness.
Evidence · text
“True widths are not known.”
QA/QC DisclosedRejected · positive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Reason: The release includes QA/QC disclosure, mentioning certified lab (ALS Brisbane), QP sign-off (Thomas Bartschi), and stated methods (standards, blanks, duplicates, check assays).
Evidence · text
“QMines' QAQC program included certified reference materials, coarse blanks and quarter-core field duplicates inserted into the sample stream at routine intervals.”
Compositing TransparentRejected · positive
Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Reason: Cut-off grade (1.0% Zn) and internal dilution rules (maximum 2m) are clearly stated for reported intervals.
Evidence · text
“(Zn) denotes intervals at a 1.0% Zn lower cut off and (Au) intervals at a 0.2g/t Au lower cut off, both with a maximum of 2m internal dilution.”
26MCDD043Mt Chalmers · goldGrade: 3.55Grade Unit: g/tIntercept: 2.7 mView all detailsHide details
Identity
- Hole ID
- 26MCDD043
- Project
- Mt Chalmers
- Commodity
- gold
- Region
- australia_qld
- Reported Region
- australia_qld
- Ticker
- QML
Geometry
- Grade
- 3.55
- Grade Unit
- g/t
- Intercept
- 2.7 m
- From
- 36.4 m
- To
- 39.1 m
- Hole Depth
- 119.8 m
- Intercept Depth
- 36.4 m
Classification
- Deposit Type
- vms
- Program
- exploration
- Sample Type
- drill
- Group ID
- 26MCDD043:36.4-39.1
- Mining Method
- underground
Location
- Easting
- 259915
- Northing
- 7421315
- Elevation
- 91.2 m
- Azimuth
- 77 °
- Dip
- -88 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Laboratories
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Deleterious
- Deleterious Flag
- No
Metal Equivalent
- Metal Eq. Grade
- 7.19
- Metal Eq. Unit
- % CuEq
- Assumptions Disclosed
- Yes
Compositing
- Cutoff Grade
- 1
- Cutoff Unit
- % Zn
- Dilution Disclosed
- Yes
- Max Dilution
- 2 m
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-10-18T00:00:00.000Z
Reasoning: While part of a high-grade polymetallic intercept, the gold grade for this interval is just below the moderate threshold for underground VHMS deposits, but still adds significant value.
Positive factors
- Polymetallic intercept with exceptional copper and strong silver credits.
- Contributes to geological understanding for upcoming resource update.
Negative factors
- Gold grade (3.55 g/t) is below the moderate threshold for underground VMS (4 g/t).
- Narrow intercept length (2.7m is narrow continuity).
- True width not known, potentially overstating actual thickness.
- Core loss (67% recovery) in the upper high-grade interval raises concerns about representativeness.
Evidence · table
“3.55”
Context: 2.7
Rejected tags
Rejected tags — excluded from scoring because their label or evidence could not be verified.
Apparent Width OnlyRejected · negative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Reason: The interval is given as downhole width with no true width or drill orientation, meaning apparent width may overstate true thickness.
Evidence · text
“True widths are not known.”
QA/QC DisclosedRejected · positive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Reason: The release includes QA/QC disclosure, mentioning certified lab (ALS Brisbane), QP sign-off (Thomas Bartschi), and stated methods (standards, blanks, duplicates, check assays).
Evidence · text
“QMines' QAQC program included certified reference materials, coarse blanks and quarter-core field duplicates inserted into the sample stream at routine intervals.”
Compositing TransparentRejected · positive
Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Reason: Cut-off grade (1.0% Zn) and internal dilution rules (maximum 2m) are clearly stated for reported intervals.
Evidence · text
“(Zn) denotes intervals at a 1.0% Zn lower cut off and (Au) intervals at a 0.2g/t Au lower cut off, both with a maximum of 2m internal dilution.”
26MCDD043Mt Chalmers · silverGrade: 32Grade Unit: g/tIntercept: 2.7 mView all detailsHide details
Identity
- Hole ID
- 26MCDD043
- Project
- Mt Chalmers
- Commodity
- silver
- Region
- australia_qld
- Reported Region
- australia_qld
- Ticker
- QML
Geometry
- Grade
- 32
- Grade Unit
- g/t
- Intercept
- 2.7 m
- From
- 36.4 m
- To
- 39.1 m
- Hole Depth
- 119.8 m
- Intercept Depth
- 36.4 m
Classification
- Deposit Type
- vms
- Program
- exploration
- Sample Type
- drill
- Group ID
- 26MCDD043:36.4-39.1
- Mining Method
- underground
Location
- Easting
- 259915
- Northing
- 7421315
- Elevation
- 91.2 m
- Azimuth
- 77 °
- Dip
- -88 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Laboratories
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Deleterious
- Deleterious Flag
- No
Metal Equivalent
- Metal Eq. Grade
- 7.19
- Metal Eq. Unit
- % CuEq
- Assumptions Disclosed
- Yes
Compositing
- Cutoff Grade
- 1
- Cutoff Unit
- % Zn
- Dilution Disclosed
- Yes
- Max Dilution
- 2 m
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-10-18T00:00:00.000Z
Reasoning: This silver intercept, while weak, is part of a broader high-grade polymetallic intercept that contributes to the overall project value.
Positive factors
- Silver grade (32 g/t) is above the weak threshold for silver (30 g/t).
- Polymetallic intercept with exceptional copper and strong gold credits.
- Contributes to geological understanding for upcoming resource update.
Negative factors
- Narrow intercept length (2.7m is narrow continuity).
- True width not known, potentially overstating actual thickness.
- Core loss (67% recovery) in the upper high-grade interval raises concerns about representativeness.
Evidence · table
“32”
Context: 2.7
Rejected tags
Rejected tags — excluded from scoring because their label or evidence could not be verified.
Apparent Width OnlyRejected · negative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Reason: The interval is given as downhole width with no true width or drill orientation, meaning apparent width may overstate true thickness.
Evidence · text
“True widths are not known.”
QA/QC DisclosedRejected · positive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Reason: The release includes QA/QC disclosure, mentioning certified lab (ALS Brisbane), QP sign-off (Thomas Bartschi), and stated methods (standards, blanks, duplicates, check assays).
Evidence · text
“QMines' QAQC program included certified reference materials, coarse blanks and quarter-core field duplicates inserted into the sample stream at routine intervals.”
Compositing TransparentRejected · positive
Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Reason: Cut-off grade (1.0% Zn) and internal dilution rules (maximum 2m) are clearly stated for reported intervals.
Evidence · text
“(Zn) denotes intervals at a 1.0% Zn lower cut off and (Au) intervals at a 0.2g/t Au lower cut off, both with a maximum of 2m internal dilution.”
26MCDD043Mt Chalmers · leadGrade: 0.44Grade Unit: %Intercept: 2.7 mView all detailsHide details
Identity
- Hole ID
- 26MCDD043
- Project
- Mt Chalmers
- Commodity
- lead
- Region
- australia_qld
- Reported Region
- australia_qld
- Ticker
- QML
Geometry
- Grade
- 0.44
- Grade Unit
- %
- Intercept
- 2.7 m
- From
- 36.4 m
- To
- 39.1 m
- Hole Depth
- 119.8 m
- Intercept Depth
- 36.4 m
Classification
- Deposit Type
- vms
- Program
- exploration
- Sample Type
- drill
- Group ID
- 26MCDD043:36.4-39.1
- Mining Method
- underground
Location
- Easting
- 259915
- Northing
- 7421315
- Elevation
- 91.2 m
- Azimuth
- 77 °
- Dip
- -88 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Laboratories
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Deleterious
- Deleterious Flag
- No
Metal Equivalent
- Metal Eq. Grade
- 7.19
- Metal Eq. Unit
- % CuEq
- Assumptions Disclosed
- Yes
Compositing
- Cutoff Grade
- 1
- Cutoff Unit
- % Zn
- Dilution Disclosed
- Yes
- Max Dilution
- 2 m
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-10-18T00:00:00.000Z
Reasoning: The lead grade for this interval is low, but it is part of a broader high-grade polymetallic intercept that contributes to the overall project value.
Positive factors
- Polymetallic intercept with exceptional copper and strong gold credits.
- Contributes to geological understanding for upcoming resource update.
Negative factors
- Lead grade (0.44%) is well below the weak threshold for lead (1%).
- Narrow intercept length (2.7m is narrow continuity).
- True width not known, potentially overstating actual thickness.
- Core loss (67% recovery) in the upper high-grade interval raises concerns about representativeness.
Evidence · table
“0.44”
Context: 2.7
Rejected tags
Rejected tags — excluded from scoring because their label or evidence could not be verified.
Apparent Width OnlyRejected · negative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Reason: The interval is given as downhole width with no true width or drill orientation, meaning apparent width may overstate true thickness.
Evidence · text
“True widths are not known.”
QA/QC DisclosedRejected · positive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Reason: The release includes QA/QC disclosure, mentioning certified lab (ALS Brisbane), QP sign-off (Thomas Bartschi), and stated methods (standards, blanks, duplicates, check assays).
Evidence · text
“QMines' QAQC program included certified reference materials, coarse blanks and quarter-core field duplicates inserted into the sample stream at routine intervals.”
Compositing TransparentRejected · positive
Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Reason: Cut-off grade (1.0% Zn) and internal dilution rules (maximum 2m) are clearly stated for reported intervals.
Evidence · text
“(Zn) denotes intervals at a 1.0% Zn lower cut off and (Au) intervals at a 0.2g/t Au lower cut off, both with a maximum of 2m internal dilution.”
26MCDD043Mt Chalmers · copperGrade: 0.67Grade Unit: %Intercept: 10.4 mView all detailsHide details
Identity
- Hole ID
- 26MCDD043
- Project
- Mt Chalmers
- Commodity
- copper
- Region
- australia_qld
- Reported Region
- australia_qld
- Ticker
- QML
Geometry
- Grade
- 0.67
- Grade Unit
- %
- Intercept
- 10.4 m
- From
- 65.6 m
- To
- 76 m
- Hole Depth
- 119.8 m
- Intercept Depth
- 36.4 m
Classification
- Deposit Type
- vms
- Program
- exploration
- Sample Type
- drill
- Group ID
- 26MCDD043:65.6-76
- Mining Method
- underground
Location
- Easting
- 259915
- Northing
- 7421315
- Elevation
- 91.2 m
- Azimuth
- 77 °
- Dip
- -88 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Laboratories
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Deleterious
- Deleterious Flag
- No
Metal Equivalent
- Metal Eq. Grade
- 0.98
- Metal Eq. Unit
- % CuEq
- Assumptions Disclosed
- Yes
Compositing
- Cutoff Grade
- 0.2
- Cutoff Unit
- % Cu
- Dilution Disclosed
- Yes
- Max Dilution
- 2 m
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-10-18T00:00:00.000Z
Reasoning: This intercept shows a moderate length with a copper grade just below the moderate threshold, still contributing positively to the project's potential.
Positive factors
- Good intercept length (10.4m is moderate continuity).
- Polymetallic intercept with gold, silver, zinc, and lead credits.
- Contributes to geological understanding for upcoming resource update.
Negative factors
- Copper grade (0.67% Cu) is below the moderate threshold for VMS (0.8%).
- True width not known, potentially overstating actual thickness.
Evidence · table
“0.67”
Context: 10.4
Rejected tags
Rejected tags — excluded from scoring because their label or evidence could not be verified.
Apparent Width OnlyRejected · negative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Reason: The interval is given as downhole width with no true width or drill orientation, meaning apparent width may overstate true thickness.
Evidence · text
“True widths are not known.”
QA/QC DisclosedRejected · positive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Reason: The release includes QA/QC disclosure, mentioning certified lab (ALS Brisbane), QP sign-off (Thomas Bartschi), and stated methods (standards, blanks, duplicates, check assays).
Evidence · text
“QMines' QAQC program included certified reference materials, coarse blanks and quarter-core field duplicates inserted into the sample stream at routine intervals.”
Compositing TransparentRejected · positive
Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Reason: Cut-off grade (0.2% Cu) and internal dilution rules (maximum 2m) are clearly stated for reported intervals.
Evidence · text
“Copper intervals are reported at a 0.2% Cu lower cut off and zinc intervals at a 1.0% Zn lower cut off, with a maximum of 2m of consecutive internal dilution and a minimum length of 1m.”
26MCDD043Mt Chalmers · goldGrade: 0.25Grade Unit: g/tIntercept: 10.4 mView all detailsHide details
Identity
- Hole ID
- 26MCDD043
- Project
- Mt Chalmers
- Commodity
- gold
- Region
- australia_qld
- Reported Region
- australia_qld
- Ticker
- QML
Geometry
- Grade
- 0.25
- Grade Unit
- g/t
- Intercept
- 10.4 m
- From
- 65.6 m
- To
- 76 m
- Hole Depth
- 119.8 m
- Intercept Depth
- 36.4 m
Classification
- Deposit Type
- vms
- Program
- exploration
- Sample Type
- drill
- Group ID
- 26MCDD043:65.6-76
- Mining Method
- underground
Location
- Easting
- 259915
- Northing
- 7421315
- Elevation
- 91.2 m
- Azimuth
- 77 °
- Dip
- -88 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Laboratories
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Deleterious
- Deleterious Flag
- No
Metal Equivalent
- Metal Eq. Grade
- 0.98
- Metal Eq. Unit
- % CuEq
- Assumptions Disclosed
- Yes
Compositing
- Cutoff Grade
- 0.2
- Cutoff Unit
- % Cu
- Dilution Disclosed
- Yes
- Max Dilution
- 2 m
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-10-18T00:00:00.000Z
Reasoning: While part of a polymetallic intercept, the gold grade for this interval is low, but still adds value to the overall project.
Positive factors
- Polymetallic intercept with other base metals.
- Contributes to geological understanding for upcoming resource update.
Negative factors
- Gold grade (0.25 g/t) is well below the weak threshold for underground VMS (2.5 g/t).
- True width not known, potentially overstating actual thickness.
Evidence · table
“0.25”
Context: 10.4
Rejected tags
Rejected tags — excluded from scoring because their label or evidence could not be verified.
Apparent Width OnlyRejected · negative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Reason: The interval is given as downhole width with no true width or drill orientation, meaning apparent width may overstate true thickness.
Evidence · text
“True widths are not known.”
QA/QC DisclosedRejected · positive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Reason: The release includes QA/QC disclosure, mentioning certified lab (ALS Brisbane), QP sign-off (Thomas Bartschi), and stated methods (standards, blanks, duplicates, check assays).
Evidence · text
“QMines' QAQC program included certified reference materials, coarse blanks and quarter-core field duplicates inserted into the sample stream at routine intervals.”
Compositing TransparentRejected · positive
Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Reason: Cut-off grade (0.2% Cu) and internal dilution rules (maximum 2m) are clearly stated for reported intervals.
Evidence · text
“Copper intervals are reported at a 0.2% Cu lower cut off and zinc intervals at a 1.0% Zn lower cut off, with a maximum of 2m of consecutive internal dilution and a minimum length of 1m.”
26MCDD043Mt Chalmers · silverGrade: 4Grade Unit: g/tIntercept: 10.4 mView all detailsHide details
Identity
- Hole ID
- 26MCDD043
- Project
- Mt Chalmers
- Commodity
- silver
- Region
- australia_qld
- Reported Region
- australia_qld
- Ticker
- QML
Geometry
- Grade
- 4
- Grade Unit
- g/t
- Intercept
- 10.4 m
- From
- 65.6 m
- To
- 76 m
- Hole Depth
- 119.8 m
- Intercept Depth
- 36.4 m
Classification
- Deposit Type
- vms
- Program
- exploration
- Sample Type
- drill
- Group ID
- 26MCDD043:65.6-76
- Mining Method
- underground
Location
- Easting
- 259915
- Northing
- 7421315
- Elevation
- 91.2 m
- Azimuth
- 77 °
- Dip
- -88 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Laboratories
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Deleterious
- Deleterious Flag
- No
Metal Equivalent
- Metal Eq. Grade
- 0.98
- Metal Eq. Unit
- % CuEq
- Assumptions Disclosed
- Yes
Compositing
- Cutoff Grade
- 0.2
- Cutoff Unit
- % Cu
- Dilution Disclosed
- Yes
- Max Dilution
- 2 m
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-10-18T00:00:00.000Z
Reasoning: While part of a polymetallic intercept, the silver grade for this interval is low, but still adds value to the overall project.
Positive factors
- Polymetallic intercept with other base metals.
- Contributes to geological understanding for upcoming resource update.
Negative factors
- Silver grade (4 g/t) is well below the weak threshold for silver (30 g/t).
- True width not known, potentially overstating actual thickness.
Evidence · table
“4”
Context: 10.4
Rejected tags
Rejected tags — excluded from scoring because their label or evidence could not be verified.
Apparent Width OnlyRejected · negative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Reason: The interval is given as downhole width with no true width or drill orientation, meaning apparent width may overstate true thickness.
Evidence · text
“True widths are not known.”
QA/QC DisclosedRejected · positive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Reason: The release includes QA/QC disclosure, mentioning certified lab (ALS Brisbane), QP sign-off (Thomas Bartschi), and stated methods (standards, blanks, duplicates, check assays).
Evidence · text
“QMines' QAQC program included certified reference materials, coarse blanks and quarter-core field duplicates inserted into the sample stream at routine intervals.”
Compositing TransparentRejected · positive
Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Reason: Cut-off grade (0.2% Cu) and internal dilution rules (maximum 2m) are clearly stated for reported intervals.
Evidence · text
“Copper intervals are reported at a 0.2% Cu lower cut off and zinc intervals at a 1.0% Zn lower cut off, with a maximum of 2m of consecutive internal dilution and a minimum length of 1m.”
26MCDD043Mt Chalmers · zincGrade: 0.26Grade Unit: %Intercept: 10.4 mView all detailsHide details
Identity
- Hole ID
- 26MCDD043
- Project
- Mt Chalmers
- Commodity
- zinc
- Region
- australia_qld
- Reported Region
- australia_qld
- Ticker
- QML
Geometry
- Grade
- 0.26
- Grade Unit
- %
- Intercept
- 10.4 m
- From
- 65.6 m
- To
- 76 m
- Hole Depth
- 119.8 m
- Intercept Depth
- 36.4 m
Classification
- Deposit Type
- vms
- Program
- exploration
- Sample Type
- drill
- Group ID
- 26MCDD043:65.6-76
- Mining Method
- underground
Location
- Easting
- 259915
- Northing
- 7421315
- Elevation
- 91.2 m
- Azimuth
- 77 °
- Dip
- -88 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Laboratories
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Deleterious
- Deleterious Flag
- No
Metal Equivalent
- Metal Eq. Grade
- 0.98
- Metal Eq. Unit
- % CuEq
- Assumptions Disclosed
- Yes
Compositing
- Cutoff Grade
- 0.2
- Cutoff Unit
- % Cu
- Dilution Disclosed
- Yes
- Max Dilution
- 2 m
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-10-18T00:00:00.000Z
Reasoning: The zinc grade for this interval is very low, but it is part of a broader polymetallic intercept that contributes to the overall project value.
Positive factors
- Polymetallic intercept with other base metals.
- Contributes to geological understanding for upcoming resource update.
Negative factors
- Zinc grade (0.26%) is well below the weak threshold for VMS zinc (2%).
- True width not known, potentially overstating actual thickness.
Evidence · table
“0.26”
Context: 10.4
Rejected tags
Rejected tags — excluded from scoring because their label or evidence could not be verified.
Apparent Width OnlyRejected · negative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Reason: The interval is given as downhole width with no true width or drill orientation, meaning apparent width may overstate true thickness.
Evidence · text
“True widths are not known.”
QA/QC DisclosedRejected · positive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Reason: The release includes QA/QC disclosure, mentioning certified lab (ALS Brisbane), QP sign-off (Thomas Bartschi), and stated methods (standards, blanks, duplicates, check assays).
Evidence · text
“QMines' QAQC program included certified reference materials, coarse blanks and quarter-core field duplicates inserted into the sample stream at routine intervals.”
Compositing TransparentRejected · positive
Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Reason: Cut-off grade (0.2% Cu) and internal dilution rules (maximum 2m) are clearly stated for reported intervals.
Evidence · text
“Copper intervals are reported at a 0.2% Cu lower cut off and zinc intervals at a 1.0% Zn lower cut off, with a maximum of 2m of consecutive internal dilution and a minimum length of 1m.”
26MCDD043Mt Chalmers · leadGrade: 0.03Grade Unit: %Intercept: 10.4 mView all detailsHide details
Identity
- Hole ID
- 26MCDD043
- Project
- Mt Chalmers
- Commodity
- lead
- Region
- australia_qld
- Reported Region
- australia_qld
- Ticker
- QML
Geometry
- Grade
- 0.03
- Grade Unit
- %
- Intercept
- 10.4 m
- From
- 65.6 m
- To
- 76 m
- Hole Depth
- 119.8 m
- Intercept Depth
- 36.4 m
Classification
- Deposit Type
- vms
- Program
- exploration
- Sample Type
- drill
- Group ID
- 26MCDD043:65.6-76
- Mining Method
- underground
Location
- Easting
- 259915
- Northing
- 7421315
- Elevation
- 91.2 m
- Azimuth
- 77 °
- Dip
- -88 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Laboratories
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Deleterious
- Deleterious Flag
- No
Metal Equivalent
- Metal Eq. Grade
- 0.98
- Metal Eq. Unit
- % CuEq
- Assumptions Disclosed
- Yes
Compositing
- Cutoff Grade
- 0.2
- Cutoff Unit
- % Cu
- Dilution Disclosed
- Yes
- Max Dilution
- 2 m
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-10-18T00:00:00.000Z
Reasoning: The lead grade for this interval is very low, but it is part of a broader polymetallic intercept that contributes to the overall project value.
Positive factors
- Polymetallic intercept with other base metals.
- Contributes to geological understanding for upcoming resource update.
Negative factors
- Lead grade (0.03%) is well below the weak threshold for lead (1%).
- True width not known, potentially overstating actual thickness.
Evidence · table
“0.03”
Context: 10.4
Rejected tags
Rejected tags — excluded from scoring because their label or evidence could not be verified.
Apparent Width OnlyRejected · negative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Reason: The interval is given as downhole width with no true width or drill orientation, meaning apparent width may overstate true thickness.
Evidence · text
“True widths are not known.”
QA/QC DisclosedRejected · positive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Reason: The release includes QA/QC disclosure, mentioning certified lab (ALS Brisbane), QP sign-off (Thomas Bartschi), and stated methods (standards, blanks, duplicates, check assays).
Evidence · text
“QMines' QAQC program included certified reference materials, coarse blanks and quarter-core field duplicates inserted into the sample stream at routine intervals.”
Compositing TransparentRejected · positive
Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Reason: Cut-off grade (0.2% Cu) and internal dilution rules (maximum 2m) are clearly stated for reported intervals.
Evidence · text
“Copper intervals are reported at a 0.2% Cu lower cut off and zinc intervals at a 1.0% Zn lower cut off, with a maximum of 2m of consecutive internal dilution and a minimum length of 1m.”
26MCDD043Mt Chalmers · copperGrade: 2.33Grade Unit: %Intercept: 1.4 mView all detailsHide details
Identity
- Hole ID
- 26MCDD043
- Project
- Mt Chalmers
- Commodity
- copper
- Region
- australia_qld
- Reported Region
- australia_qld
- Ticker
- QML
Geometry
- Grade
- 2.33
- Grade Unit
- %
- Intercept
- 1.4 m
- From
- 65.6 m
- To
- 67 m
- Hole Depth
- 119.8 m
- Intercept Depth
- 36.4 m
Classification
- Deposit Type
- vms
- Program
- exploration
- Sample Type
- drill
- Group ID
- 26MCDD043:65.6-67
- Mining Method
- underground
Location
- Easting
- 259915
- Northing
- 7421315
- Elevation
- 91.2 m
- Azimuth
- 77 °
- Dip
- -88 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Laboratories
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Deleterious
- Deleterious Flag
- No
Metal Equivalent
- Metal Eq. Grade
- 2.96
- Metal Eq. Unit
- % CuEq
- Assumptions Disclosed
- Yes
Compositing
- Cutoff Grade
- 1
- Cutoff Unit
- % Cu
- Dilution Disclosed
- Yes
- Max Dilution
- 2 m
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-10-18T00:00:00.000Z
Reasoning: This intercept shows a strong copper grade over a very narrow length, contributing positively to the project's potential.
Positive factors
- Good copper grade (2.33% Cu) is strong for VMS deposit type (>=1.5% strong threshold).
- Polymetallic intercept with gold, silver, zinc, and lead credits.
- Contributes to geological understanding for upcoming resource update.
Negative factors
- Very narrow intercept length (1.4m is narrow continuity).
- True width not known, potentially overstating actual thickness.
Evidence · table
“2.33”
Context: 1.4
Rejected tags
Rejected tags — excluded from scoring because their label or evidence could not be verified.
Apparent Width OnlyRejected · negative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Reason: The interval is given as downhole width with no true width or drill orientation, meaning apparent width may overstate true thickness.
Evidence · text
“True widths are not known.”
QA/QC DisclosedRejected · positive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Reason: The release includes QA/QC disclosure, mentioning certified lab (ALS Brisbane), QP sign-off (Thomas Bartschi), and stated methods (standards, blanks, duplicates, check assays).
Evidence · text
“QMines' QAQC program included certified reference materials, coarse blanks and quarter-core field duplicates inserted into the sample stream at routine intervals.”
Compositing TransparentRejected · positive
Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Reason: Cut-off grade (1.0% Cu) and internal dilution rules (maximum 2m) are clearly stated for reported intervals.
Evidence · text
“Included intervals are reported at 1.0% Cu and 2.0% Cu on the same basis.”
26MCDD043Mt Chalmers · goldGrade: 0.56Grade Unit: g/tIntercept: 1.4 mView all detailsHide details
Identity
- Hole ID
- 26MCDD043
- Project
- Mt Chalmers
- Commodity
- gold
- Region
- australia_qld
- Reported Region
- australia_qld
- Ticker
- QML
Geometry
- Grade
- 0.56
- Grade Unit
- g/t
- Intercept
- 1.4 m
- From
- 65.6 m
- To
- 67 m
- Hole Depth
- 119.8 m
- Intercept Depth
- 36.4 m
Classification
- Deposit Type
- vms
- Program
- exploration
- Sample Type
- drill
- Group ID
- 26MCDD043:65.6-67
- Mining Method
- underground
Location
- Easting
- 259915
- Northing
- 7421315
- Elevation
- 91.2 m
- Azimuth
- 77 °
- Dip
- -88 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Laboratories
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Deleterious
- Deleterious Flag
- No
Metal Equivalent
- Metal Eq. Grade
- 2.96
- Metal Eq. Unit
- % CuEq
- Assumptions Disclosed
- Yes
Compositing
- Cutoff Grade
- 1
- Cutoff Unit
- % Cu
- Dilution Disclosed
- Yes
- Max Dilution
- 2 m
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-10-18T00:00:00.000Z
Reasoning: While part of a polymetallic intercept, the gold grade for this interval is low, but still adds value to the overall project.
Positive factors
- Polymetallic intercept with strong copper and other base metals.
- Contributes to geological understanding for upcoming resource update.
Negative factors
- Gold grade (0.56 g/t) is well below the weak threshold for underground VMS (2.5 g/t).
- Very narrow intercept length (1.4m is narrow continuity).
- True width not known, potentially overstating actual thickness.
Evidence · table
“0.56”
Context: 1.4
Rejected tags
Rejected tags — excluded from scoring because their label or evidence could not be verified.
Apparent Width OnlyRejected · negative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Reason: The interval is given as downhole width with no true width or drill orientation, meaning apparent width may overstate true thickness.
Evidence · text
“True widths are not known.”
QA/QC DisclosedRejected · positive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Reason: The release includes QA/QC disclosure, mentioning certified lab (ALS Brisbane), QP sign-off (Thomas Bartschi), and stated methods (standards, blanks, duplicates, check assays).
Evidence · text
“QMines' QAQC program included certified reference materials, coarse blanks and quarter-core field duplicates inserted into the sample stream at routine intervals.”
Compositing TransparentRejected · positive
Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Reason: Cut-off grade (1.0% Cu) and internal dilution rules (maximum 2m) are clearly stated for reported intervals.
Evidence · text
“Included intervals are reported at 1.0% Cu and 2.0% Cu on the same basis.”
26MCDD043Mt Chalmers · silverGrade: 9Grade Unit: g/tIntercept: 1.4 mView all detailsHide details
Identity
- Hole ID
- 26MCDD043
- Project
- Mt Chalmers
- Commodity
- silver
- Region
- australia_qld
- Reported Region
- australia_qld
- Ticker
- QML
Geometry
- Grade
- 9
- Grade Unit
- g/t
- Intercept
- 1.4 m
- From
- 65.6 m
- To
- 67 m
- Hole Depth
- 119.8 m
- Intercept Depth
- 36.4 m
Classification
- Deposit Type
- vms
- Program
- exploration
- Sample Type
- drill
- Group ID
- 26MCDD043:65.6-67
- Mining Method
- underground
Location
- Easting
- 259915
- Northing
- 7421315
- Elevation
- 91.2 m
- Azimuth
- 77 °
- Dip
- -88 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Laboratories
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Deleterious
- Deleterious Flag
- No
Metal Equivalent
- Metal Eq. Grade
- 2.96
- Metal Eq. Unit
- % CuEq
- Assumptions Disclosed
- Yes
Compositing
- Cutoff Grade
- 1
- Cutoff Unit
- % Cu
- Dilution Disclosed
- Yes
- Max Dilution
- 2 m
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-10-18T00:00:00.000Z
Reasoning: The silver grade for this interval is low, but it is part of a broader polymetallic intercept that contributes to the overall project value.
Positive factors
- Polymetallic intercept with strong copper and other base metals.
- Contributes to geological understanding for upcoming resource update.
Negative factors
- Silver grade (9 g/t) is well below the weak threshold for silver (30 g/t).
- Very narrow intercept length (1.4m is narrow continuity).
- True width not known, potentially overstating actual thickness.
Evidence · table
“9”
Context: 1.4
Rejected tags
Rejected tags — excluded from scoring because their label or evidence could not be verified.
Apparent Width OnlyRejected · negative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Reason: The interval is given as downhole width with no true width or drill orientation, meaning apparent width may overstate true thickness.
Evidence · text
“True widths are not known.”
QA/QC DisclosedRejected · positive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Reason: The release includes QA/QC disclosure, mentioning certified lab (ALS Brisbane), QP sign-off (Thomas Bartschi), and stated methods (standards, blanks, duplicates, check assays).
Evidence · text
“QMines' QAQC program included certified reference materials, coarse blanks and quarter-core field duplicates inserted into the sample stream at routine intervals.”
Compositing TransparentRejected · positive
Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Reason: Cut-off grade (1.0% Cu) and internal dilution rules (maximum 2m) are clearly stated for reported intervals.
Evidence · text
“Included intervals are reported at 1.0% Cu and 2.0% Cu on the same basis.”
26MCDD043Mt Chalmers · zincGrade: 0.26Grade Unit: %Intercept: 1.4 mView all detailsHide details
Identity
- Hole ID
- 26MCDD043
- Project
- Mt Chalmers
- Commodity
- zinc
- Region
- australia_qld
- Reported Region
- australia_qld
- Ticker
- QML
Geometry
- Grade
- 0.26
- Grade Unit
- %
- Intercept
- 1.4 m
- From
- 65.6 m
- To
- 67 m
- Hole Depth
- 119.8 m
- Intercept Depth
- 36.4 m
Classification
- Deposit Type
- vms
- Program
- exploration
- Sample Type
- drill
- Group ID
- 26MCDD043:65.6-67
- Mining Method
- underground
Location
- Easting
- 259915
- Northing
- 7421315
- Elevation
- 91.2 m
- Azimuth
- 77 °
- Dip
- -88 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Laboratories
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Deleterious
- Deleterious Flag
- No
Metal Equivalent
- Metal Eq. Grade
- 2.96
- Metal Eq. Unit
- % CuEq
- Assumptions Disclosed
- Yes
Compositing
- Cutoff Grade
- 1
- Cutoff Unit
- % Cu
- Dilution Disclosed
- Yes
- Max Dilution
- 2 m
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-10-18T00:00:00.000Z
Reasoning: The zinc grade for this interval is very low, but it is part of a broader polymetallic intercept that contributes to the overall project value.
Positive factors
- Polymetallic intercept with strong copper and other base metals.
- Contributes to geological understanding for upcoming resource update.
Negative factors
- Zinc grade (0.26%) is well below the weak threshold for VMS zinc (2%).
- Very narrow intercept length (1.4m is narrow continuity).
- True width not known, potentially overstating actual thickness.
Evidence · table
“0.26”
Context: 1.4
Rejected tags
Rejected tags — excluded from scoring because their label or evidence could not be verified.
Apparent Width OnlyRejected · negative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Reason: The interval is given as downhole width with no true width or drill orientation, meaning apparent width may overstate true thickness.
Evidence · text
“True widths are not known.”
QA/QC DisclosedRejected · positive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Reason: The release includes QA/QC disclosure, mentioning certified lab (ALS Brisbane), QP sign-off (Thomas Bartschi), and stated methods (standards, blanks, duplicates, check assays).
Evidence · text
“QMines' QAQC program included certified reference materials, coarse blanks and quarter-core field duplicates inserted into the sample stream at routine intervals.”
Compositing TransparentRejected · positive
Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Reason: Cut-off grade (1.0% Cu) and internal dilution rules (maximum 2m) are clearly stated for reported intervals.
Evidence · text
“Included intervals are reported at 1.0% Cu and 2.0% Cu on the same basis.”
26MCDD043Mt Chalmers · leadGrade: 0.07Grade Unit: %Intercept: 1.4 mView all detailsHide details
Identity
- Hole ID
- 26MCDD043
- Project
- Mt Chalmers
- Commodity
- lead
- Region
- australia_qld
- Reported Region
- australia_qld
- Ticker
- QML
Geometry
- Grade
- 0.07
- Grade Unit
- %
- Intercept
- 1.4 m
- From
- 65.6 m
- To
- 67 m
- Hole Depth
- 119.8 m
- Intercept Depth
- 36.4 m
Classification
- Deposit Type
- vms
- Program
- exploration
- Sample Type
- drill
- Group ID
- 26MCDD043:65.6-67
- Mining Method
- underground
Location
- Easting
- 259915
- Northing
- 7421315
- Elevation
- 91.2 m
- Azimuth
- 77 °
- Dip
- -88 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Laboratories
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Deleterious
- Deleterious Flag
- No
Metal Equivalent
- Metal Eq. Grade
- 2.96
- Metal Eq. Unit
- % CuEq
- Assumptions Disclosed
- Yes
Compositing
- Cutoff Grade
- 1
- Cutoff Unit
- % Cu
- Dilution Disclosed
- Yes
- Max Dilution
- 2 m
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-10-18T00:00:00.000Z
Reasoning: The lead grade for this interval is very low, but it is part of a broader polymetallic intercept that contributes to the overall project value.
Positive factors
- Polymetallic intercept with strong copper and other base metals.
- Contributes to geological understanding for upcoming resource update.
Negative factors
- Lead grade (0.07%) is well below the weak threshold for lead (1%).
- Very narrow intercept length (1.4m is narrow continuity).
- True width not known, potentially overstating actual thickness.
Evidence · table
“0.07”
Context: 1.4
Rejected tags
Rejected tags — excluded from scoring because their label or evidence could not be verified.
Apparent Width OnlyRejected · negative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Reason: The interval is given as downhole width with no true width or drill orientation, meaning apparent width may overstate true thickness.
Evidence · text
“True widths are not known.”
QA/QC DisclosedRejected · positive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Reason: The release includes QA/QC disclosure, mentioning certified lab (ALS Brisbane), QP sign-off (Thomas Bartschi), and stated methods (standards, blanks, duplicates, check assays).
Evidence · text
“QMines' QAQC program included certified reference materials, coarse blanks and quarter-core field duplicates inserted into the sample stream at routine intervals.”
Compositing TransparentRejected · positive
Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Reason: Cut-off grade (1.0% Cu) and internal dilution rules (maximum 2m) are clearly stated for reported intervals.
Evidence · text
“Included intervals are reported at 1.0% Cu and 2.0% Cu on the same basis.”
26MCDD043Mt Chalmers · copperGrade: 1.22Grade Unit: %Intercept: 1 mView all detailsHide details
Identity
- Hole ID
- 26MCDD043
- Project
- Mt Chalmers
- Commodity
- copper
- Region
- australia_qld
- Reported Region
- australia_qld
- Ticker
- QML
Geometry
- Grade
- 1.22
- Grade Unit
- %
- Intercept
- 1 m
- From
- 70 m
- To
- 71 m
- Hole Depth
- 119.8 m
- Intercept Depth
- 36.4 m
Classification
- Deposit Type
- vms
- Program
- exploration
- Sample Type
- drill
- Group ID
- 26MCDD043:70-71
- Mining Method
- underground
Location
- Easting
- 259915
- Northing
- 7421315
- Elevation
- 91.2 m
- Azimuth
- 77 °
- Dip
- -88 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Laboratories
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Deleterious
- Deleterious Flag
- No
Metal Equivalent
- Metal Eq. Grade
- 1.57
- Metal Eq. Unit
- % CuEq
- Assumptions Disclosed
- Yes
Compositing
- Cutoff Grade
- 1
- Cutoff Unit
- % Cu
- Dilution Disclosed
- Yes
- Max Dilution
- 2 m
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-10-18T00:00:00.000Z
Reasoning: This intercept shows a moderate copper grade over a very narrow length, contributing positively to the project's potential.
Positive factors
- Good copper grade (1.22% Cu) is moderate for VMS deposit type (>=0.8% moderate threshold).
- Polymetallic intercept with gold, silver, zinc, and lead credits.
- Contributes to geological understanding for upcoming resource update.
Negative factors
- Very narrow intercept length (1.0m is narrow continuity).
- True width not known, potentially overstating actual thickness.
Evidence · table
“1.22”
Context: 1.0
Rejected tags
Rejected tags — excluded from scoring because their label or evidence could not be verified.
Apparent Width OnlyRejected · negative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Reason: The interval is given as downhole width with no true width or drill orientation, meaning apparent width may overstate true thickness.
Evidence · text
“True widths are not known.”
QA/QC DisclosedRejected · positive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Reason: The release includes QA/QC disclosure, mentioning certified lab (ALS Brisbane), QP sign-off (Thomas Bartschi), and stated methods (standards, blanks, duplicates, check assays).
Evidence · text
“QMines' QAQC program included certified reference materials, coarse blanks and quarter-core field duplicates inserted into the sample stream at routine intervals.”
Compositing TransparentRejected · positive
Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Reason: Cut-off grade (1.0% Cu) and internal dilution rules (maximum 2m) are clearly stated for reported intervals.
Evidence · text
“Included intervals are reported at 1.0% Cu and 2.0% Cu on the same basis.”
26MCDD043Mt Chalmers · goldGrade: 0.37Grade Unit: g/tIntercept: 1 mView all detailsHide details
Identity
- Hole ID
- 26MCDD043
- Project
- Mt Chalmers
- Commodity
- gold
- Region
- australia_qld
- Reported Region
- australia_qld
- Ticker
- QML
Geometry
- Grade
- 0.37
- Grade Unit
- g/t
- Intercept
- 1 m
- From
- 70 m
- To
- 71 m
- Hole Depth
- 119.8 m
- Intercept Depth
- 36.4 m
Classification
- Deposit Type
- vms
- Program
- exploration
- Sample Type
- drill
- Group ID
- 26MCDD043:70-71
- Mining Method
- underground
Location
- Easting
- 259915
- Northing
- 7421315
- Elevation
- 91.2 m
- Azimuth
- 77 °
- Dip
- -88 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Laboratories
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Deleterious
- Deleterious Flag
- No
Metal Equivalent
- Metal Eq. Grade
- 1.57
- Metal Eq. Unit
- % CuEq
- Assumptions Disclosed
- Yes
Compositing
- Cutoff Grade
- 1
- Cutoff Unit
- % Cu
- Dilution Disclosed
- Yes
- Max Dilution
- 2 m
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-10-18T00:00:00.000Z
Reasoning: While part of a polymetallic intercept, the gold grade for this interval is low, but still adds value to the overall project.
Positive factors
- Polymetallic intercept with moderate copper and other base metals.
- Contributes to geological understanding for upcoming resource update.
Negative factors
- Gold grade (0.37 g/t) is well below the weak threshold for underground VMS (2.5 g/t).
- Very narrow intercept length (1.0m is narrow continuity).
- True width not known, potentially overstating actual thickness.
Evidence · table
“0.37”
Context: 1.0
Rejected tags
Rejected tags — excluded from scoring because their label or evidence could not be verified.
Apparent Width OnlyRejected · negative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Reason: The interval is given as downhole width with no true width or drill orientation, meaning apparent width may overstate true thickness.
Evidence · text
“True widths are not known.”
QA/QC DisclosedRejected · positive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Reason: The release includes QA/QC disclosure, mentioning certified lab (ALS Brisbane), QP sign-off (Thomas Bartschi), and stated methods (standards, blanks, duplicates, check assays).
Evidence · text
“QMines' QAQC program included certified reference materials, coarse blanks and quarter-core field duplicates inserted into the sample stream at routine intervals.”
Compositing TransparentRejected · positive
Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Reason: Cut-off grade (1.0% Cu) and internal dilution rules (maximum 2m) are clearly stated for reported intervals.
Evidence · text
“Included intervals are reported at 1.0% Cu and 2.0% Cu on the same basis.”
26MCDD043Mt Chalmers · silverGrade: 4Grade Unit: g/tIntercept: 1 mView all detailsHide details
Identity
- Hole ID
- 26MCDD043
- Project
- Mt Chalmers
- Commodity
- silver
- Region
- australia_qld
- Reported Region
- australia_qld
- Ticker
- QML
Geometry
- Grade
- 4
- Grade Unit
- g/t
- Intercept
- 1 m
- From
- 70 m
- To
- 71 m
- Hole Depth
- 119.8 m
- Intercept Depth
- 36.4 m
Classification
- Deposit Type
- vms
- Program
- exploration
- Sample Type
- drill
- Group ID
- 26MCDD043:70-71
- Mining Method
- underground
Location
- Easting
- 259915
- Northing
- 7421315
- Elevation
- 91.2 m
- Azimuth
- 77 °
- Dip
- -88 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Laboratories
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Deleterious
- Deleterious Flag
- No
Metal Equivalent
- Metal Eq. Grade
- 1.57
- Metal Eq. Unit
- % CuEq
- Assumptions Disclosed
- Yes
Compositing
- Cutoff Grade
- 1
- Cutoff Unit
- % Cu
- Dilution Disclosed
- Yes
- Max Dilution
- 2 m
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-10-18T00:00:00.000Z
Reasoning: While part of a polymetallic intercept, the silver grade for this interval is low, but still adds value to the overall project.
Positive factors
- Polymetallic intercept with moderate copper and other base metals.
- Contributes to geological understanding for upcoming resource update.
Negative factors
- Silver grade (4 g/t) is well below the weak threshold for silver (30 g/t).
- Very narrow intercept length (1.0m is narrow continuity).
- True width not known, potentially overstating actual thickness.
Evidence · table
“4”
Context: 1.0
Rejected tags
Rejected tags — excluded from scoring because their label or evidence could not be verified.
Apparent Width OnlyRejected · negative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Reason: The interval is given as downhole width with no true width or drill orientation, meaning apparent width may overstate true thickness.
Evidence · text
“True widths are not known.”
QA/QC DisclosedRejected · positive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Reason: The release includes QA/QC disclosure, mentioning certified lab (ALS Brisbane), QP sign-off (Thomas Bartschi), and stated methods (standards, blanks, duplicates, check assays).
Evidence · text
“QMines' QAQC program included certified reference materials, coarse blanks and quarter-core field duplicates inserted into the sample stream at routine intervals.”
Compositing TransparentRejected · positive
Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Reason: Cut-off grade (1.0% Cu) and internal dilution rules (maximum 2m) are clearly stated for reported intervals.
Evidence · text
“Included intervals are reported at 1.0% Cu and 2.0% Cu on the same basis.”
26MCDD043Mt Chalmers · zincGrade: 0.04Grade Unit: %Intercept: 1 mView all detailsHide details
Identity
- Hole ID
- 26MCDD043
- Project
- Mt Chalmers
- Commodity
- zinc
- Region
- australia_qld
- Reported Region
- australia_qld
- Ticker
- QML
Geometry
- Grade
- 0.04
- Grade Unit
- %
- Intercept
- 1 m
- From
- 70 m
- To
- 71 m
- Hole Depth
- 119.8 m
- Intercept Depth
- 36.4 m
Classification
- Deposit Type
- vms
- Program
- exploration
- Sample Type
- drill
- Group ID
- 26MCDD043:70-71
- Mining Method
- underground
Location
- Easting
- 259915
- Northing
- 7421315
- Elevation
- 91.2 m
- Azimuth
- 77 °
- Dip
- -88 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Laboratories
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Deleterious
- Deleterious Flag
- No
Metal Equivalent
- Metal Eq. Grade
- 1.57
- Metal Eq. Unit
- % CuEq
- Assumptions Disclosed
- Yes
Compositing
- Cutoff Grade
- 1
- Cutoff Unit
- % Cu
- Dilution Disclosed
- Yes
- Max Dilution
- 2 m
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-10-18T00:00:00.000Z
Reasoning: The zinc grade for this interval is very low, but it is part of a broader polymetallic intercept that contributes to the overall project value.
Positive factors
- Polymetallic intercept with moderate copper and other base metals.
- Contributes to geological understanding for upcoming resource update.
Negative factors
- Zinc grade (0.04%) is well below the weak threshold for VMS zinc (2%).
- Very narrow intercept length (1.0m is narrow continuity).
- True width not known, potentially overstating actual thickness.
Evidence · table
“0.04”
Context: 1.0
Rejected tags
Rejected tags — excluded from scoring because their label or evidence could not be verified.
Apparent Width OnlyRejected · negative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Reason: The interval is given as downhole width with no true width or drill orientation, meaning apparent width may overstate true thickness.
Evidence · text
“True widths are not known.”
QA/QC DisclosedRejected · positive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Reason: The release includes QA/QC disclosure, mentioning certified lab (ALS Brisbane), QP sign-off (Thomas Bartschi), and stated methods (standards, blanks, duplicates, check assays).
Evidence · text
“QMines' QAQC program included certified reference materials, coarse blanks and quarter-core field duplicates inserted into the sample stream at routine intervals.”
Compositing TransparentRejected · positive
Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Reason: Cut-off grade (1.0% Cu) and internal dilution rules (maximum 2m) are clearly stated for reported intervals.
Evidence · text
“Included intervals are reported at 1.0% Cu and 2.0% Cu on the same basis.”
26MCDD043Mt Chalmers · leadGrade: 0.01Grade Unit: %Intercept: 1 mView all detailsHide details
Identity
- Hole ID
- 26MCDD043
- Project
- Mt Chalmers
- Commodity
- lead
- Region
- australia_qld
- Reported Region
- australia_qld
- Ticker
- QML
Geometry
- Grade
- 0.01
- Grade Unit
- %
- Intercept
- 1 m
- From
- 70 m
- To
- 71 m
- Hole Depth
- 119.8 m
- Intercept Depth
- 36.4 m
Classification
- Deposit Type
- vms
- Program
- exploration
- Sample Type
- drill
- Group ID
- 26MCDD043:70-71
- Mining Method
- underground
Location
- Easting
- 259915
- Northing
- 7421315
- Elevation
- 91.2 m
- Azimuth
- 77 °
- Dip
- -88 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Laboratories
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Deleterious
- Deleterious Flag
- No
Metal Equivalent
- Metal Eq. Grade
- 1.57
- Metal Eq. Unit
- % CuEq
- Assumptions Disclosed
- Yes
Compositing
- Cutoff Grade
- 1
- Cutoff Unit
- % Cu
- Dilution Disclosed
- Yes
- Max Dilution
- 2 m
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-10-18T00:00:00.000Z
Reasoning: The lead grade for this interval is very low, but it is part of a broader polymetallic intercept that contributes to the overall project value.
Positive factors
- Polymetallic intercept with moderate copper and other base metals.
- Contributes to geological understanding for upcoming resource update.
Negative factors
- Lead grade (0.01%) is well below the weak threshold for lead (1%).
- Very narrow intercept length (1.0m is narrow continuity).
- True width not known, potentially overstating actual thickness.
Evidence · table
“0.01”
Context: 1.0
Rejected tags
Rejected tags — excluded from scoring because their label or evidence could not be verified.
Apparent Width OnlyRejected · negative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Reason: The interval is given as downhole width with no true width or drill orientation, meaning apparent width may overstate true thickness.
Evidence · text
“True widths are not known.”
QA/QC DisclosedRejected · positive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Reason: The release includes QA/QC disclosure, mentioning certified lab (ALS Brisbane), QP sign-off (Thomas Bartschi), and stated methods (standards, blanks, duplicates, check assays).
Evidence · text
“QMines' QAQC program included certified reference materials, coarse blanks and quarter-core field duplicates inserted into the sample stream at routine intervals.”
Compositing TransparentRejected · positive
Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Reason: Cut-off grade (1.0% Cu) and internal dilution rules (maximum 2m) are clearly stated for reported intervals.
Evidence · text
“Included intervals are reported at 1.0% Cu and 2.0% Cu on the same basis.”
26MCDD043Mt Chalmers · zincGrade: 1.42Grade Unit: %Intercept: 1 mView all detailsHide details
Identity
- Hole ID
- 26MCDD043
- Project
- Mt Chalmers
- Commodity
- zinc
- Region
- australia_qld
- Reported Region
- australia_qld
- Ticker
- QML
Geometry
- Grade
- 1.42
- Grade Unit
- %
- Intercept
- 1 m
- From
- 74 m
- To
- 75 m
- Hole Depth
- 119.8 m
- Intercept Depth
- 36.4 m
Classification
- Deposit Type
- vms
- Program
- exploration
- Sample Type
- drill
- Group ID
- 26MCDD043:74-75
- Mining Method
- underground
Location
- Easting
- 259915
- Northing
- 7421315
- Elevation
- 91.2 m
- Azimuth
- 77 °
- Dip
- -88 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Laboratories
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Deleterious
- Deleterious Flag
- No
Metal Equivalent
- Metal Eq. Grade
- 0.57
- Metal Eq. Unit
- % CuEq
- Assumptions Disclosed
- Yes
Compositing
- Cutoff Grade
- 1
- Cutoff Unit
- % Zn
- Dilution Disclosed
- Yes
- Max Dilution
- 2 m
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-10-18T00:00:00.000Z
Reasoning: The zinc grade for this interval is low, but it is part of a broader polymetallic intercept that contributes to the overall project value.
Positive factors
- Polymetallic intercept with gold, silver, and lead credits.
- Contributes to geological understanding for upcoming resource update.
Negative factors
- Zinc grade (1.42%) is below the weak threshold for VMS zinc (2%).
- Very narrow intercept length (1.0m is narrow continuity).
- True width not known, potentially overstating actual thickness.
Evidence · table
“1.42”
Context: 1.0
Rejected tags
Rejected tags — excluded from scoring because their label or evidence could not be verified.
Apparent Width OnlyRejected · negative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Reason: The interval is given as downhole width with no true width or drill orientation, meaning apparent width may overstate true thickness.
Evidence · text
“True widths are not known.”
QA/QC DisclosedRejected · positive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Reason: The release includes QA/QC disclosure, mentioning certified lab (ALS Brisbane), QP sign-off (Thomas Bartschi), and stated methods (standards, blanks, duplicates, check assays).
Evidence · text
“QMines' QAQC program included certified reference materials, coarse blanks and quarter-core field duplicates inserted into the sample stream at routine intervals.”
Compositing TransparentRejected · positive
Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Reason: Cut-off grade (1.0% Zn) and internal dilution rules (maximum 2m) are clearly stated for reported intervals.
Evidence · text
“(Zn) denotes intervals at a 1.0% Zn lower cut off and (Au) intervals at a 0.2g/t Au lower cut off, both with a maximum of 2m internal dilution.”
26MCDD047Mt Chalmers · copperGrade: 1.8Grade Unit: %Intercept: 7.6 mView all detailsHide details
Identity
- Hole ID
- 26MCDD047
- Project
- Mt Chalmers
- Commodity
- copper
- Region
- australia_qld
- Reported Region
- australia_qld
- Ticker
- QML
Geometry
- Grade
- 1.8
- Grade Unit
- %
- Intercept
- 7.6 m
- From
- 42.1 m
- To
- 49.7 m
Classification
- Deposit Type
- vms
- Sample Type
- drill
QA/QC
- Laboratory
- ALS Laboratories
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Compositing
- Dilution Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-10-18T00:00:00.000Z
Reasoning: This intercept shows a strong copper grade over a significant length, contributing positively to the project's potential, despite some core loss and unknown true width.
Positive factors
- Good copper grade for VHMS deposit type (1.28% Cu is strong against VMS 0.8% moderate threshold).
- Significant intercept length (26.2m is strong continuity).
- Polymetallic intercept with gold, silver, zinc, and lead credits.
- Contributes to geological understanding for upcoming resource update.
Negative factors
- True width not known, potentially overstating actual thickness.
- Core loss (67% recovery) in the upper high-grade interval raises concerns about representativeness.
Evidence · text
“7.6m at 1.8% Cu and 1.5g/t Au (3.2% CuEq) from 42.1m”
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
26MCDD048Mt Chalmers · copperGrade: 1Grade Unit: %Intercept: 13 mView all detailsHide details
Identity
- Hole ID
- 26MCDD048
- Project
- Mt Chalmers
- Commodity
- copper
- Region
- australia_qld
- Reported Region
- australia_qld
- Ticker
- QML
Geometry
- Grade
- 1
- Grade Unit
- %
- Intercept
- 13 m
- From
- 50 m
- To
- 63 m
Classification
- Deposit Type
- vms
- Sample Type
- drill
QA/QC
- Laboratory
- ALS Laboratories
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Compositing
- Dilution Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-10-18T00:00:00.000Z
Reasoning: This intercept shows a strong copper grade over a significant length, contributing positively to the project's potential, despite some core loss and unknown true width.
Positive factors
- Good copper grade for VHMS deposit type (1.28% Cu is strong against VMS 0.8% moderate threshold).
- Significant intercept length (26.2m is strong continuity).
- Polymetallic intercept with gold, silver, zinc, and lead credits.
- Contributes to geological understanding for upcoming resource update.
Negative factors
- True width not known, potentially overstating actual thickness.
- Core loss (67% recovery) in the upper high-grade interval raises concerns about representativeness.
Evidence · text
“13.0m at 1.0% Cu and 0.4g/t Au (1.5% CuEq) from 50.0m”
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
26MCDD056Mt Chalmers · copperGrade: 1.3Grade Unit: %Intercept: 26.2 mView all detailsHide details
Identity
- Hole ID
- 26MCDD056
- Project
- Mt Chalmers
- Commodity
- copper
- Region
- australia_qld
- Reported Region
- australia_qld
- Ticker
- QML
Geometry
- Grade
- 1.3
- Grade Unit
- %
- Intercept
- 26.2 m
- From
- 36.4 m
- To
- 62.6 m
Classification
- Deposit Type
- vms
- Sample Type
- drill
QA/QC
- Laboratory
- ALS Laboratories
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Compositing
- Dilution Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-10-18T00:00:00.000Z
Reasoning: This intercept shows a strong copper grade over a significant length, contributing positively to the project's potential, despite some core loss and unknown true width.
Positive factors
- Good copper grade for VHMS deposit type (1.28% Cu is strong against VMS 0.8% moderate threshold).
- Significant intercept length (26.2m is strong continuity).
- Polymetallic intercept with gold, silver, zinc, and lead credits.
- Contributes to geological understanding for upcoming resource update.
Negative factors
- True width not known, potentially overstating actual thickness.
- Core loss (67% recovery) in the upper high-grade interval raises concerns about representativeness.
Evidence · text
“26.2m at 1.3% Cu, 0.7g/t Au and 6g/t Ag (2.0% CuEq) from 36.4m”
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
How Atlas produces this analysis
Minestarters Atlas uses automated extraction to summarize mining announcements, identify reported measurements, and classify supporting evidence. Sentiment reflects the extracted narrative and classification rules; it is an interpretation, not a reported measurement. Evidence quotes and context are provided where available. Missing data, low-confidence results, and review flags indicate limitations. Check the original publisher announcement before relying on an interpretation.