QML: First Pontoon Results Deliver High-Grade Copper-Gold-Zinc
Original announcement by asx on
- Company
- QMines Limited
- Ticker
- QML
- Exchange
- ASX
- Region
- Unavailable
- Primary commodity
- Copper
- Secondary commodities
- Gold, Zinc, Silver, Lead
- Document categories
- Drill results, Resource update
- Extracted
- 2026-10-06 23:10:03 UTC
Analysis by Minestarters Atlas
Atlas analysis published:
Minestarters Atlas analysis
Summary
QMines Limited announced high-grade copper-gold-zinc drill results from its first pontoon drilling program at the Mt Chalmers Project. Holes 26MCDD025 and 26MCDD027 intersected significant polymetallic mineralization, with grades approximately 20% higher than the current resource block model. These results provide fresh core for future resource modeling and geometallurgical testwork, confirming the potential for extensions beneath the pit floor.
Reasoning: The first pontoon drilling results from Mt Chalmers delivered high-grade polymetallic intercepts that significantly exceeded the existing block model, confirming and extending mineralization in a previously underexplored area beneath the pit. This represents a material and novel positive development for the project, supported by strong QA/QC and JORC compliance, despite the current lack of true width information.
Positive factors
- High-grade polymetallic intercepts, including significant copper, gold, zinc, silver, and lead values.
- Results from new pontoon drilling beneath the Mt Chalmers pit floor exceeded the existing resource block model by approximately 20%.
- The drilling confirms high-grade mineralization in an area previously reliant on historical data, providing fresh core for future resource modeling and geometallurgical testwork.
- The mineralization style (Kuroko-style VHMS) suggests potential for vertical zonation with high-grade polymetallic lenses overlying copper-rich zones.
- Robust QA/QC procedures are in place, and the results are JORC compliant with Competent Person sign-off.
Negative factors
- True widths are not yet known, which may overstate the significance of downhole intercept lengths.
- Upper mineralization contacts are not constrained by recovered core, introducing some uncertainty at the top of the intervals.
Facts used in scoring: 86
Extracted facts
Stored fact records: 86. Some facts used in scoring do not have a stored record.
Drill Results (86)
26MCDD025Mt Chalmers · copperGrade: 1.04Grade Unit: %Intercept: 16.7 mView all detailsHide details
Identity
- Hole ID
- 26MCDD025
- Project
- Mt Chalmers
- Commodity
- copper
- Region
- australia_qld
- Reported Region
- australia_qld
- Ticker
- QML
Geometry
- Grade
- 1.04
- Grade Unit
- %
- Intercept
- 16.7 m
- From
- 23.3 m
- To
- 40 m
- Hole Depth
- 125.66 m
- Intercept Depth
- 23.3 m
Classification
- Deposit Type
- vms
- Program
- resource
- Sample Type
- drill
- Group ID
- 26MCDD025:23.3-40
- Mining Method
- open_pit
Location
- Easting
- 259875.9
- Northing
- 7421260.3
- Elevation
- 91.1 m
- Azimuth
- 0 °
- Dip
- -89.4 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Laboratories in Brisbane
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- Yes
Compositing
- Cutoff Grade
- 0.2
- Cutoff Unit
- % Cu
- Dilution Disclosed
- Yes
- Max Dilution
- 2 m
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-10-06T00:00:00.000Z
Reasoning: This is a strong copper intercept from the first pontoon drilling, exceeding the block model and indicating significant mineralization beneath the pit.
Positive factors
- High-grade copper intercept for VMS deposit type.
- Part of the first pontoon drilling program, indicating high novelty.
- Exceeds the existing resource block model.
Negative factors
- True width not known.
Evidence · table
“1.04”
Context: 16.7
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Compositing Transparentpositive
Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Why it applies: cutoff_grade and internal dilution are both stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
26MCDD025Mt Chalmers · goldGrade: 1.16Grade Unit: g/tIntercept: 16.7 mView all detailsHide details
Identity
- Hole ID
- 26MCDD025
- Project
- Mt Chalmers
- Commodity
- gold
- Region
- australia_qld
- Reported Region
- australia_qld
- Ticker
- QML
Geometry
- Grade
- 1.16
- Grade Unit
- g/t
- Intercept
- 16.7 m
- From
- 23.3 m
- To
- 40 m
- Hole Depth
- 125.66 m
- Intercept Depth
- 23.3 m
Classification
- Deposit Type
- vms
- Program
- resource
- Sample Type
- drill
- Group ID
- 26MCDD025:23.3-40
- Mining Method
- open_pit
Location
- Easting
- 259875.9
- Northing
- 7421260.3
- Elevation
- 91.1 m
- Azimuth
- 0 °
- Dip
- -89.4 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Laboratories in Brisbane
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- Yes
Compositing
- Cutoff Grade
- 0.2
- Cutoff Unit
- % Cu
- Dilution Disclosed
- Yes
- Max Dilution
- 2 m
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-10-06T00:00:00.000Z
Reasoning: This is a good gold intercept from the first pontoon drilling, exceeding the block model and indicating significant mineralization beneath the pit.
Positive factors
- Good gold grade for VMS deposit type.
- Part of the first pontoon drilling program, indicating high novelty.
- Exceeds the existing resource block model.
Negative factors
- True width not known.
Evidence · table
“1.16”
Context: 16.7
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Compositing Transparentpositive
Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Why it applies: cutoff_grade and internal dilution are both stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
26MCDD025Mt Chalmers · silverGrade: 26Grade Unit: g/tIntercept: 16.7 mView all detailsHide details
Identity
- Hole ID
- 26MCDD025
- Project
- Mt Chalmers
- Commodity
- silver
- Region
- australia_qld
- Reported Region
- australia_qld
- Ticker
- QML
Geometry
- Grade
- 26
- Grade Unit
- g/t
- Intercept
- 16.7 m
- From
- 23.3 m
- To
- 40 m
- Hole Depth
- 125.66 m
- Intercept Depth
- 23.3 m
Classification
- Deposit Type
- vms
- Program
- resource
- Sample Type
- drill
- Group ID
- 26MCDD025:23.3-40
- Mining Method
- open_pit
Location
- Easting
- 259875.9
- Northing
- 7421260.3
- Elevation
- 91.1 m
- Azimuth
- 0 °
- Dip
- -89.4 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Laboratories in Brisbane
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- Yes
Compositing
- Cutoff Grade
- 0.2
- Cutoff Unit
- % Cu
- Dilution Disclosed
- Yes
- Max Dilution
- 2 m
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-10-06T00:00:00.000Z
Reasoning: This is a good silver intercept from the first pontoon drilling, exceeding the block model and indicating significant mineralization beneath the pit.
Positive factors
- Good silver grade for VMS deposit type.
- Part of the first pontoon drilling program, indicating high novelty.
- Exceeds the existing resource block model.
Negative factors
- True width not known.
Evidence · table
“26”
Context: 16.7
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Compositing Transparentpositive
Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Why it applies: cutoff_grade and internal dilution are both stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
26MCDD025Mt Chalmers · zincGrade: 1.24Grade Unit: %Intercept: 16.7 mView all detailsHide details
Identity
- Hole ID
- 26MCDD025
- Project
- Mt Chalmers
- Commodity
- zinc
- Region
- australia_qld
- Reported Region
- australia_qld
- Ticker
- QML
Geometry
- Grade
- 1.24
- Grade Unit
- %
- Intercept
- 16.7 m
- From
- 23.3 m
- To
- 40 m
- Hole Depth
- 125.66 m
- Intercept Depth
- 23.3 m
Classification
- Deposit Type
- vms
- Program
- resource
- Sample Type
- drill
- Group ID
- 26MCDD025:23.3-40
- Mining Method
- open_pit
Location
- Easting
- 259875.9
- Northing
- 7421260.3
- Elevation
- 91.1 m
- Azimuth
- 0 °
- Dip
- -89.4 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Laboratories in Brisbane
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- Yes
Compositing
- Cutoff Grade
- 0.2
- Cutoff Unit
- % Cu
- Dilution Disclosed
- Yes
- Max Dilution
- 2 m
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-10-06T00:00:00.000Z
Reasoning: This is a good zinc intercept from the first pontoon drilling, exceeding the block model and indicating significant mineralization beneath the pit.
Positive factors
- Good zinc grade for VMS deposit type.
- Part of the first pontoon drilling program, indicating high novelty.
- Exceeds the existing resource block model.
Negative factors
- True width not known.
Evidence · table
“1.24”
Context: 16.7
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Compositing Transparentpositive
Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Why it applies: cutoff_grade and internal dilution are both stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
26MCDD025Mt Chalmers · leadGrade: 0.57Grade Unit: %Intercept: 16.7 mView all detailsHide details
Identity
- Hole ID
- 26MCDD025
- Project
- Mt Chalmers
- Commodity
- lead
- Region
- australia_qld
- Reported Region
- australia_qld
- Ticker
- QML
Geometry
- Grade
- 0.57
- Grade Unit
- %
- Intercept
- 16.7 m
- From
- 23.3 m
- To
- 40 m
- Hole Depth
- 125.66 m
- Intercept Depth
- 23.3 m
Classification
- Deposit Type
- vms
- Program
- resource
- Sample Type
- drill
- Group ID
- 26MCDD025:23.3-40
- Mining Method
- open_pit
Location
- Easting
- 259875.9
- Northing
- 7421260.3
- Elevation
- 91.1 m
- Azimuth
- 0 °
- Dip
- -89.4 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Laboratories in Brisbane
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- Yes
Compositing
- Cutoff Grade
- 0.2
- Cutoff Unit
- % Cu
- Dilution Disclosed
- Yes
- Max Dilution
- 2 m
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-10-06T00:00:00.000Z
Reasoning: This is a good lead intercept from the first pontoon drilling, exceeding the block model and indicating significant mineralization beneath the pit.
Positive factors
- Good lead grade for VMS deposit type.
- Part of the first pontoon drilling program, indicating high novelty.
- Exceeds the existing resource block model.
Negative factors
- True width not known.
Evidence · table
“0.57”
Context: 16.7
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Compositing Transparentpositive
Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Why it applies: cutoff_grade and internal dilution are both stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
26MCDD025Mt Chalmers · copperGrade: 2.07Grade Unit: %Intercept: 6.7 mView all detailsHide details
Identity
- Hole ID
- 26MCDD025
- Project
- Mt Chalmers
- Commodity
- copper
- Region
- australia_qld
- Reported Region
- australia_qld
- Ticker
- QML
Geometry
- Grade
- 2.07
- Grade Unit
- %
- Intercept
- 6.7 m
- From
- 23.3 m
- To
- 30 m
- Hole Depth
- 125.66 m
- Intercept Depth
- 23.3 m
Classification
- Deposit Type
- vms
- Program
- resource
- Sample Type
- drill
- Group ID
- 26MCDD025:23.3-30
- Mining Method
- open_pit
Location
- Easting
- 259875.9
- Northing
- 7421260.3
- Elevation
- 91.1 m
- Azimuth
- 0 °
- Dip
- -89.4 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Laboratories in Brisbane
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- Yes
Compositing
- Cutoff Grade
- 0.2
- Cutoff Unit
- % Cu
- Dilution Disclosed
- Yes
- Max Dilution
- 2 m
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-10-06T00:00:00.000Z
Reasoning: This is a high-grade copper intercept from the first pontoon drilling, exceeding the block model and indicating significant mineralization beneath the pit.
Positive factors
- High-grade copper intercept for VMS deposit type.
- Part of the first pontoon drilling program, indicating high novelty.
- Exceeds the existing resource block model.
Negative factors
- True width not known.
Evidence · table
“2.07”
Context: 6.7
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Compositing Transparentpositive
Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Why it applies: cutoff_grade and internal dilution are both stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
26MCDD025Mt Chalmers · goldGrade: 2.37Grade Unit: g/tIntercept: 6.7 mView all detailsHide details
Identity
- Hole ID
- 26MCDD025
- Project
- Mt Chalmers
- Commodity
- gold
- Region
- australia_qld
- Reported Region
- australia_qld
- Ticker
- QML
Geometry
- Grade
- 2.37
- Grade Unit
- g/t
- Intercept
- 6.7 m
- From
- 23.3 m
- To
- 30 m
- Hole Depth
- 125.66 m
- Intercept Depth
- 23.3 m
Classification
- Deposit Type
- vms
- Program
- resource
- Sample Type
- drill
- Group ID
- 26MCDD025:23.3-30
- Mining Method
- open_pit
Location
- Easting
- 259875.9
- Northing
- 7421260.3
- Elevation
- 91.1 m
- Azimuth
- 0 °
- Dip
- -89.4 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Laboratories in Brisbane
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- Yes
Compositing
- Cutoff Grade
- 0.2
- Cutoff Unit
- % Cu
- Dilution Disclosed
- Yes
- Max Dilution
- 2 m
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-10-06T00:00:00.000Z
Reasoning: This is a high-grade gold intercept from the first pontoon drilling, exceeding the block model and indicating significant mineralization beneath the pit.
Positive factors
- High-grade gold intercept for VMS deposit type.
- Part of the first pontoon drilling program, indicating high novelty.
- Exceeds the existing resource block model.
Negative factors
- True width not known.
Evidence · table
“2.37”
Context: 6.7
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Compositing Transparentpositive
Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Why it applies: cutoff_grade and internal dilution are both stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
26MCDD025Mt Chalmers · silverGrade: 60Grade Unit: g/tIntercept: 6.7 mView all detailsHide details
Identity
- Hole ID
- 26MCDD025
- Project
- Mt Chalmers
- Commodity
- silver
- Region
- australia_qld
- Reported Region
- australia_qld
- Ticker
- QML
Geometry
- Grade
- 60
- Grade Unit
- g/t
- Intercept
- 6.7 m
- From
- 23.3 m
- To
- 30 m
- Hole Depth
- 125.66 m
- Intercept Depth
- 23.3 m
Classification
- Deposit Type
- vms
- Program
- resource
- Sample Type
- drill
- Group ID
- 26MCDD025:23.3-30
- Mining Method
- open_pit
Location
- Easting
- 259875.9
- Northing
- 7421260.3
- Elevation
- 91.1 m
- Azimuth
- 0 °
- Dip
- -89.4 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Laboratories in Brisbane
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- Yes
Compositing
- Cutoff Grade
- 0.2
- Cutoff Unit
- % Cu
- Dilution Disclosed
- Yes
- Max Dilution
- 2 m
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-10-06T00:00:00.000Z
Reasoning: This is a good silver intercept from the first pontoon drilling, exceeding the block model and indicating significant mineralization beneath the pit.
Positive factors
- Good silver grade for VMS deposit type.
- Part of the first pontoon drilling program, indicating high novelty.
- Exceeds the existing resource block model.
Negative factors
- True width not known.
Evidence · table
“60”
Context: 6.7
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Compositing Transparentpositive
Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Why it applies: cutoff_grade and internal dilution are both stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
26MCDD025Mt Chalmers · zincGrade: 2.74Grade Unit: %Intercept: 6.7 mView all detailsHide details
Identity
- Hole ID
- 26MCDD025
- Project
- Mt Chalmers
- Commodity
- zinc
- Region
- australia_qld
- Reported Region
- australia_qld
- Ticker
- QML
Geometry
- Grade
- 2.74
- Grade Unit
- %
- Intercept
- 6.7 m
- From
- 23.3 m
- To
- 30 m
- Hole Depth
- 125.66 m
- Intercept Depth
- 23.3 m
Classification
- Deposit Type
- vms
- Program
- resource
- Sample Type
- drill
- Group ID
- 26MCDD025:23.3-30
- Mining Method
- open_pit
Location
- Easting
- 259875.9
- Northing
- 7421260.3
- Elevation
- 91.1 m
- Azimuth
- 0 °
- Dip
- -89.4 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Laboratories in Brisbane
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- Yes
Compositing
- Cutoff Grade
- 0.2
- Cutoff Unit
- % Cu
- Dilution Disclosed
- Yes
- Max Dilution
- 2 m
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-10-06T00:00:00.000Z
Reasoning: This is a high-grade zinc intercept from the first pontoon drilling, exceeding the block model and indicating significant mineralization beneath the pit.
Positive factors
- High-grade zinc intercept for VMS deposit type.
- Part of the first pontoon drilling program, indicating high novelty.
- Exceeds the existing resource block model.
Negative factors
- True width not known.
Evidence · table
“2.74”
Context: 6.7
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Compositing Transparentpositive
Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Why it applies: cutoff_grade and internal dilution are both stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
26MCDD025Mt Chalmers · leadGrade: 1.39Grade Unit: %Intercept: 6.7 mView all detailsHide details
Identity
- Hole ID
- 26MCDD025
- Project
- Mt Chalmers
- Commodity
- lead
- Region
- australia_qld
- Reported Region
- australia_qld
- Ticker
- QML
Geometry
- Grade
- 1.39
- Grade Unit
- %
- Intercept
- 6.7 m
- From
- 23.3 m
- To
- 30 m
- Hole Depth
- 125.66 m
- Intercept Depth
- 23.3 m
Classification
- Deposit Type
- vms
- Program
- resource
- Sample Type
- drill
- Group ID
- 26MCDD025:23.3-30
- Mining Method
- open_pit
Location
- Easting
- 259875.9
- Northing
- 7421260.3
- Elevation
- 91.1 m
- Azimuth
- 0 °
- Dip
- -89.4 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Laboratories in Brisbane
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- Yes
Compositing
- Cutoff Grade
- 0.2
- Cutoff Unit
- % Cu
- Dilution Disclosed
- Yes
- Max Dilution
- 2 m
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-10-06T00:00:00.000Z
Reasoning: This is a good lead intercept from the first pontoon drilling, exceeding the block model and indicating significant mineralization beneath the pit.
Positive factors
- Good lead grade for VMS deposit type.
- Part of the first pontoon drilling program, indicating high novelty.
- Exceeds the existing resource block model.
Negative factors
- True width not known.
Evidence · table
“1.39”
Context: 6.7
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Compositing Transparentpositive
Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Why it applies: cutoff_grade and internal dilution are both stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
26MCDD025Mt Chalmers · copperGrade: 3.15Grade Unit: %Intercept: 3 mView all detailsHide details
Identity
- Hole ID
- 26MCDD025
- Project
- Mt Chalmers
- Commodity
- copper
- Region
- australia_qld
- Reported Region
- australia_qld
- Ticker
- QML
Geometry
- Grade
- 3.15
- Grade Unit
- %
- Intercept
- 3 m
- From
- 27 m
- To
- 30 m
- Hole Depth
- 125.66 m
- Intercept Depth
- 23.3 m
Classification
- Deposit Type
- vms
- Program
- resource
- Sample Type
- drill
- Group ID
- 26MCDD025:27-30
- Mining Method
- open_pit
Location
- Easting
- 259875.9
- Northing
- 7421260.3
- Elevation
- 91.1 m
- Azimuth
- 0 °
- Dip
- -89.4 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Laboratories in Brisbane
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- Yes
Compositing
- Cutoff Grade
- 0.2
- Cutoff Unit
- % Cu
- Dilution Disclosed
- Yes
- Max Dilution
- 2 m
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-10-06T00:00:00.000Z
Reasoning: This is an exceptional copper intercept from the first pontoon drilling, exceeding the block model and indicating significant mineralization beneath the pit.
Positive factors
- Exceptional copper grade for VMS deposit type.
- Part of the first pontoon drilling program, indicating high novelty.
- Exceeds the existing resource block model.
Negative factors
- True width not known.
Evidence · table
“3.15”
Context: 3.0
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Compositing Transparentpositive
Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Why it applies: cutoff_grade and internal dilution are both stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
26MCDD025Mt Chalmers · goldGrade: 1.15Grade Unit: g/tIntercept: 3 mView all detailsHide details
Identity
- Hole ID
- 26MCDD025
- Project
- Mt Chalmers
- Commodity
- gold
- Region
- australia_qld
- Reported Region
- australia_qld
- Ticker
- QML
Geometry
- Grade
- 1.15
- Grade Unit
- g/t
- Intercept
- 3 m
- From
- 27 m
- To
- 30 m
- Hole Depth
- 125.66 m
- Intercept Depth
- 23.3 m
Classification
- Deposit Type
- vms
- Program
- resource
- Sample Type
- drill
- Group ID
- 26MCDD025:27-30
- Mining Method
- open_pit
Location
- Easting
- 259875.9
- Northing
- 7421260.3
- Elevation
- 91.1 m
- Azimuth
- 0 °
- Dip
- -89.4 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Laboratories in Brisbane
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- Yes
Compositing
- Cutoff Grade
- 0.2
- Cutoff Unit
- % Cu
- Dilution Disclosed
- Yes
- Max Dilution
- 2 m
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-10-06T00:00:00.000Z
Reasoning: This is a good gold intercept from the first pontoon drilling, exceeding the block model and indicating significant mineralization beneath the pit.
Positive factors
- Good gold grade for VMS deposit type.
- Part of the first pontoon drilling program, indicating high novelty.
- Exceeds the existing resource block model.
Negative factors
- True width not known.
Evidence · table
“1.15”
Context: 3.0
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Compositing Transparentpositive
Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Why it applies: cutoff_grade and internal dilution are both stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
26MCDD025Mt Chalmers · silverGrade: 31Grade Unit: g/tIntercept: 3 mView all detailsHide details
Identity
- Hole ID
- 26MCDD025
- Project
- Mt Chalmers
- Commodity
- silver
- Region
- australia_qld
- Reported Region
- australia_qld
- Ticker
- QML
Geometry
- Grade
- 31
- Grade Unit
- g/t
- Intercept
- 3 m
- From
- 27 m
- To
- 30 m
- Hole Depth
- 125.66 m
- Intercept Depth
- 23.3 m
Classification
- Deposit Type
- vms
- Program
- resource
- Sample Type
- drill
- Group ID
- 26MCDD025:27-30
- Mining Method
- open_pit
Location
- Easting
- 259875.9
- Northing
- 7421260.3
- Elevation
- 91.1 m
- Azimuth
- 0 °
- Dip
- -89.4 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Laboratories in Brisbane
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- Yes
Compositing
- Cutoff Grade
- 0.2
- Cutoff Unit
- % Cu
- Dilution Disclosed
- Yes
- Max Dilution
- 2 m
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-10-06T00:00:00.000Z
Reasoning: This is a good silver intercept from the first pontoon drilling, exceeding the block model and indicating significant mineralization beneath the pit.
Positive factors
- Good silver grade for VMS deposit type.
- Part of the first pontoon drilling program, indicating high novelty.
- Exceeds the existing resource block model.
Negative factors
- True width not known.
Evidence · table
“31”
Context: 3.0
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Compositing Transparentpositive
Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Why it applies: cutoff_grade and internal dilution are both stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
26MCDD025Mt Chalmers · zincGrade: 1.2Grade Unit: %Intercept: 3 mView all detailsHide details
Identity
- Hole ID
- 26MCDD025
- Project
- Mt Chalmers
- Commodity
- zinc
- Region
- australia_qld
- Reported Region
- australia_qld
- Ticker
- QML
Geometry
- Grade
- 1.2
- Grade Unit
- %
- Intercept
- 3 m
- From
- 27 m
- To
- 30 m
- Hole Depth
- 125.66 m
- Intercept Depth
- 23.3 m
Classification
- Deposit Type
- vms
- Program
- resource
- Sample Type
- drill
- Group ID
- 26MCDD025:27-30
- Mining Method
- open_pit
Location
- Easting
- 259875.9
- Northing
- 7421260.3
- Elevation
- 91.1 m
- Azimuth
- 0 °
- Dip
- -89.4 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Laboratories in Brisbane
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- Yes
Compositing
- Cutoff Grade
- 0.2
- Cutoff Unit
- % Cu
- Dilution Disclosed
- Yes
- Max Dilution
- 2 m
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-10-06T00:00:00.000Z
Reasoning: This is a good zinc intercept from the first pontoon drilling, exceeding the block model and indicating significant mineralization beneath the pit.
Positive factors
- Good zinc grade for VMS deposit type.
- Part of the first pontoon drilling program, indicating high novelty.
- Exceeds the existing resource block model.
Negative factors
- True width not known.
Evidence · table
“1.20”
Context: 3.0
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Compositing Transparentpositive
Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Why it applies: cutoff_grade and internal dilution are both stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
26MCDD025Mt Chalmers · leadGrade: 0.3Grade Unit: %Intercept: 3 mView all detailsHide details
Identity
- Hole ID
- 26MCDD025
- Project
- Mt Chalmers
- Commodity
- lead
- Region
- australia_qld
- Reported Region
- australia_qld
- Ticker
- QML
Geometry
- Grade
- 0.3
- Grade Unit
- %
- Intercept
- 3 m
- From
- 27 m
- To
- 30 m
- Hole Depth
- 125.66 m
- Intercept Depth
- 23.3 m
Classification
- Deposit Type
- vms
- Program
- resource
- Sample Type
- drill
- Group ID
- 26MCDD025:27-30
- Mining Method
- open_pit
Location
- Easting
- 259875.9
- Northing
- 7421260.3
- Elevation
- 91.1 m
- Azimuth
- 0 °
- Dip
- -89.4 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Laboratories in Brisbane
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- Yes
Compositing
- Cutoff Grade
- 0.2
- Cutoff Unit
- % Cu
- Dilution Disclosed
- Yes
- Max Dilution
- 2 m
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-10-06T00:00:00.000Z
Reasoning: This is a good lead intercept from the first pontoon drilling, exceeding the block model and indicating significant mineralization beneath the pit.
Positive factors
- Good lead grade for VMS deposit type.
- Part of the first pontoon drilling program, indicating high novelty.
- Exceeds the existing resource block model.
Negative factors
- True width not known.
Evidence · table
“0.30”
Context: 3.0
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Compositing Transparentpositive
Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Why it applies: cutoff_grade and internal dilution are both stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
26MCDD025Mt Chalmers · copperGrade: 1.29Grade Unit: %Intercept: 2.7 mView all detailsHide details
Identity
- Hole ID
- 26MCDD025
- Project
- Mt Chalmers
- Commodity
- copper
- Region
- australia_qld
- Reported Region
- australia_qld
- Ticker
- QML
Geometry
- Grade
- 1.29
- Grade Unit
- %
- Intercept
- 2.7 m
- From
- 23.3 m
- To
- 26 m
- Hole Depth
- 125.66 m
- Intercept Depth
- 23.3 m
Classification
- Deposit Type
- vms
- Program
- resource
- Sample Type
- drill
- Group ID
- 26MCDD025:23.3-26
- Mining Method
- open_pit
Location
- Easting
- 259875.9
- Northing
- 7421260.3
- Elevation
- 91.1 m
- Azimuth
- 0 °
- Dip
- -89.4 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Laboratories in Brisbane
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- Yes
Compositing
- Cutoff Grade
- 1
- Cutoff Unit
- % Zn
- Dilution Disclosed
- Yes
- Max Dilution
- 2 m
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-10-06T00:00:00.000Z
Reasoning: This is a high-grade copper intercept from the first pontoon drilling, exceeding the block model and indicating significant mineralization beneath the pit.
Positive factors
- High-grade copper intercept for VMS deposit type.
- Part of the first pontoon drilling program, indicating high novelty.
- Exceeds the existing resource block model.
Negative factors
- True width not known.
Evidence · table
“1.29”
Context: 2.7
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Compositing Transparentpositive
Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Why it applies: cutoff_grade and internal dilution are both stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
26MCDD025Mt Chalmers · goldGrade: 4.44Grade Unit: g/tIntercept: 2.7 mView all detailsHide details
Identity
- Hole ID
- 26MCDD025
- Project
- Mt Chalmers
- Commodity
- gold
- Region
- australia_qld
- Reported Region
- australia_qld
- Ticker
- QML
Geometry
- Grade
- 4.44
- Grade Unit
- g/t
- Intercept
- 2.7 m
- From
- 23.3 m
- To
- 26 m
- Hole Depth
- 125.66 m
- Intercept Depth
- 23.3 m
Classification
- Deposit Type
- vms
- Program
- resource
- Sample Type
- drill
- Group ID
- 26MCDD025:23.3-26
- Mining Method
- open_pit
Location
- Easting
- 259875.9
- Northing
- 7421260.3
- Elevation
- 91.1 m
- Azimuth
- 0 °
- Dip
- -89.4 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Laboratories in Brisbane
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- Yes
Compositing
- Cutoff Grade
- 1
- Cutoff Unit
- % Zn
- Dilution Disclosed
- Yes
- Max Dilution
- 2 m
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-10-06T00:00:00.000Z
Reasoning: This is a high-grade gold intercept from the first pontoon drilling, exceeding the block model and indicating significant mineralization beneath the pit.
Positive factors
- High-grade gold intercept for VMS deposit type.
- Part of the first pontoon drilling program, indicating high novelty.
- Exceeds the existing resource block model.
Negative factors
- True width not known.
Evidence · table
“4.44”
Context: 2.7
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Compositing Transparentpositive
Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Why it applies: cutoff_grade and internal dilution are both stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
26MCDD025Mt Chalmers · silverGrade: 109Grade Unit: g/tIntercept: 2.7 mView all detailsHide details
Identity
- Hole ID
- 26MCDD025
- Project
- Mt Chalmers
- Commodity
- silver
- Region
- australia_qld
- Reported Region
- australia_qld
- Ticker
- QML
Geometry
- Grade
- 109
- Grade Unit
- g/t
- Intercept
- 2.7 m
- From
- 23.3 m
- To
- 26 m
- Hole Depth
- 125.66 m
- Intercept Depth
- 23.3 m
Classification
- Deposit Type
- vms
- Program
- resource
- Sample Type
- drill
- Group ID
- 26MCDD025:23.3-26
- Mining Method
- open_pit
Location
- Easting
- 259875.9
- Northing
- 7421260.3
- Elevation
- 91.1 m
- Azimuth
- 0 °
- Dip
- -89.4 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Laboratories in Brisbane
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- Yes
Compositing
- Cutoff Grade
- 1
- Cutoff Unit
- % Zn
- Dilution Disclosed
- Yes
- Max Dilution
- 2 m
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-10-06T00:00:00.000Z
Reasoning: This is a high-grade silver intercept from the first pontoon drilling, exceeding the block model and indicating significant mineralization beneath the pit.
Positive factors
- High-grade silver intercept for VMS deposit type.
- Part of the first pontoon drilling program, indicating high novelty.
- Exceeds the existing resource block model.
Negative factors
- True width not known.
Evidence · table
“109”
Context: 2.7
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Compositing Transparentpositive
Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Why it applies: cutoff_grade and internal dilution are both stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
26MCDD025Mt Chalmers · zincGrade: 5.25Grade Unit: %Intercept: 2.7 mView all detailsHide details
Identity
- Hole ID
- 26MCDD025
- Project
- Mt Chalmers
- Commodity
- zinc
- Region
- australia_qld
- Reported Region
- australia_qld
- Ticker
- QML
Geometry
- Grade
- 5.25
- Grade Unit
- %
- Intercept
- 2.7 m
- From
- 23.3 m
- To
- 26 m
- Hole Depth
- 125.66 m
- Intercept Depth
- 23.3 m
Classification
- Deposit Type
- vms
- Program
- resource
- Sample Type
- drill
- Group ID
- 26MCDD025:23.3-26
- Mining Method
- open_pit
Location
- Easting
- 259875.9
- Northing
- 7421260.3
- Elevation
- 91.1 m
- Azimuth
- 0 °
- Dip
- -89.4 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Laboratories in Brisbane
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- Yes
Compositing
- Cutoff Grade
- 1
- Cutoff Unit
- % Zn
- Dilution Disclosed
- Yes
- Max Dilution
- 2 m
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-10-06T00:00:00.000Z
Reasoning: This is a high-grade zinc intercept from the first pontoon drilling, exceeding the block model and indicating significant mineralization beneath the pit.
Positive factors
- High-grade zinc intercept for VMS deposit type.
- Part of the first pontoon drilling program, indicating high novelty.
- Exceeds the existing resource block model.
Negative factors
- True width not known.
Evidence · table
“5.25”
Context: 2.7
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Compositing Transparentpositive
Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Why it applies: cutoff_grade and internal dilution are both stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
26MCDD025Mt Chalmers · leadGrade: 3.04Grade Unit: %Intercept: 2.7 mView all detailsHide details
Identity
- Hole ID
- 26MCDD025
- Project
- Mt Chalmers
- Commodity
- lead
- Region
- australia_qld
- Reported Region
- australia_qld
- Ticker
- QML
Geometry
- Grade
- 3.04
- Grade Unit
- %
- Intercept
- 2.7 m
- From
- 23.3 m
- To
- 26 m
- Hole Depth
- 125.66 m
- Intercept Depth
- 23.3 m
Classification
- Deposit Type
- vms
- Program
- resource
- Sample Type
- drill
- Group ID
- 26MCDD025:23.3-26
- Mining Method
- open_pit
Location
- Easting
- 259875.9
- Northing
- 7421260.3
- Elevation
- 91.1 m
- Azimuth
- 0 °
- Dip
- -89.4 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Laboratories in Brisbane
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- Yes
Compositing
- Cutoff Grade
- 1
- Cutoff Unit
- % Zn
- Dilution Disclosed
- Yes
- Max Dilution
- 2 m
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-10-06T00:00:00.000Z
Reasoning: This is a high-grade lead intercept from the first pontoon drilling, exceeding the block model and indicating significant mineralization beneath the pit.
Positive factors
- High-grade lead intercept for VMS deposit type.
- Part of the first pontoon drilling program, indicating high novelty.
- Exceeds the existing resource block model.
Negative factors
- True width not known.
Evidence · table
“3.04”
Context: 2.7
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Compositing Transparentpositive
Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Why it applies: cutoff_grade and internal dilution are both stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
26MCDD025Mt Chalmers · copperGrade: 3.32Grade Unit: %Intercept: 1 mView all detailsHide details
Identity
- Hole ID
- 26MCDD025
- Project
- Mt Chalmers
- Commodity
- copper
- Region
- australia_qld
- Reported Region
- australia_qld
- Ticker
- QML
Geometry
- Grade
- 3.32
- Grade Unit
- %
- Intercept
- 1 m
- From
- 29 m
- To
- 30 m
- Hole Depth
- 125.66 m
- Intercept Depth
- 23.3 m
Classification
- Deposit Type
- vms
- Program
- resource
- Sample Type
- drill
- Group ID
- 26MCDD025:29-30
- Mining Method
- open_pit
Location
- Easting
- 259875.9
- Northing
- 7421260.3
- Elevation
- 91.1 m
- Azimuth
- 0 °
- Dip
- -89.4 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Laboratories in Brisbane
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- Yes
Compositing
- Cutoff Grade
- 1
- Cutoff Unit
- % Zn
- Dilution Disclosed
- Yes
- Max Dilution
- 2 m
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-10-06T00:00:00.000Z
Reasoning: This is an exceptional copper intercept from the first pontoon drilling, exceeding the block model and indicating significant mineralization beneath the pit.
Positive factors
- Exceptional copper grade for VMS deposit type.
- Part of the first pontoon drilling program, indicating high novelty.
- Exceeds the existing resource block model.
Negative factors
- True width not known.
Evidence · table
“3.32”
Context: 1.0
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Compositing Transparentpositive
Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Why it applies: cutoff_grade and internal dilution are both stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
26MCDD025Mt Chalmers · goldGrade: 1.15Grade Unit: g/tIntercept: 1 mView all detailsHide details
Identity
- Hole ID
- 26MCDD025
- Project
- Mt Chalmers
- Commodity
- gold
- Region
- australia_qld
- Reported Region
- australia_qld
- Ticker
- QML
Geometry
- Grade
- 1.15
- Grade Unit
- g/t
- Intercept
- 1 m
- From
- 29 m
- To
- 30 m
- Hole Depth
- 125.66 m
- Intercept Depth
- 23.3 m
Classification
- Deposit Type
- vms
- Program
- resource
- Sample Type
- drill
- Group ID
- 26MCDD025:29-30
- Mining Method
- open_pit
Location
- Easting
- 259875.9
- Northing
- 7421260.3
- Elevation
- 91.1 m
- Azimuth
- 0 °
- Dip
- -89.4 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Laboratories in Brisbane
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- Yes
Compositing
- Cutoff Grade
- 1
- Cutoff Unit
- % Zn
- Dilution Disclosed
- Yes
- Max Dilution
- 2 m
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-10-06T00:00:00.000Z
Reasoning: This is a good gold intercept from the first pontoon drilling, exceeding the block model and indicating significant mineralization beneath the pit.
Positive factors
- Good gold grade for VMS deposit type.
- Part of the first pontoon drilling program, indicating high novelty.
- Exceeds the existing resource block model.
Negative factors
- True width not known.
Evidence · table
“1.15”
Context: 1.0
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Compositing Transparentpositive
Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Why it applies: cutoff_grade and internal dilution are both stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
26MCDD025Mt Chalmers · silverGrade: 31Grade Unit: g/tIntercept: 1 mView all detailsHide details
Identity
- Hole ID
- 26MCDD025
- Project
- Mt Chalmers
- Commodity
- silver
- Region
- australia_qld
- Reported Region
- australia_qld
- Ticker
- QML
Geometry
- Grade
- 31
- Grade Unit
- g/t
- Intercept
- 1 m
- From
- 29 m
- To
- 30 m
- Hole Depth
- 125.66 m
- Intercept Depth
- 23.3 m
Classification
- Deposit Type
- vms
- Program
- resource
- Sample Type
- drill
- Group ID
- 26MCDD025:29-30
- Mining Method
- open_pit
Location
- Easting
- 259875.9
- Northing
- 7421260.3
- Elevation
- 91.1 m
- Azimuth
- 0 °
- Dip
- -89.4 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Laboratories in Brisbane
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- Yes
Compositing
- Cutoff Grade
- 1
- Cutoff Unit
- % Zn
- Dilution Disclosed
- Yes
- Max Dilution
- 2 m
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-10-06T00:00:00.000Z
Reasoning: This is a good silver intercept from the first pontoon drilling, exceeding the block model and indicating significant mineralization beneath the pit.
Positive factors
- Good silver grade for VMS deposit type.
- Part of the first pontoon drilling program, indicating high novelty.
- Exceeds the existing resource block model.
Negative factors
- True width not known.
Evidence · table
“31”
Context: 1.0
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Compositing Transparentpositive
Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Why it applies: cutoff_grade and internal dilution are both stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
26MCDD025Mt Chalmers · zincGrade: 1.95Grade Unit: %Intercept: 1 mView all detailsHide details
Identity
- Hole ID
- 26MCDD025
- Project
- Mt Chalmers
- Commodity
- zinc
- Region
- australia_qld
- Reported Region
- australia_qld
- Ticker
- QML
Geometry
- Grade
- 1.95
- Grade Unit
- %
- Intercept
- 1 m
- From
- 29 m
- To
- 30 m
- Hole Depth
- 125.66 m
- Intercept Depth
- 23.3 m
Classification
- Deposit Type
- vms
- Program
- resource
- Sample Type
- drill
- Group ID
- 26MCDD025:29-30
- Mining Method
- open_pit
Location
- Easting
- 259875.9
- Northing
- 7421260.3
- Elevation
- 91.1 m
- Azimuth
- 0 °
- Dip
- -89.4 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Laboratories in Brisbane
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- Yes
Compositing
- Cutoff Grade
- 1
- Cutoff Unit
- % Zn
- Dilution Disclosed
- Yes
- Max Dilution
- 2 m
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-10-06T00:00:00.000Z
Reasoning: This is a high-grade zinc intercept from the first pontoon drilling, exceeding the block model and indicating significant mineralization beneath the pit.
Positive factors
- High-grade zinc intercept for VMS deposit type.
- Part of the first pontoon drilling program, indicating high novelty.
- Exceeds the existing resource block model.
Negative factors
- True width not known.
Evidence · table
“1.95”
Context: 1.0
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Compositing Transparentpositive
Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Why it applies: cutoff_grade and internal dilution are both stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
26MCDD025Mt Chalmers · leadGrade: 0.21Grade Unit: %Intercept: 1 mView all detailsHide details
Identity
- Hole ID
- 26MCDD025
- Project
- Mt Chalmers
- Commodity
- lead
- Region
- australia_qld
- Reported Region
- australia_qld
- Ticker
- QML
Geometry
- Grade
- 0.21
- Grade Unit
- %
- Intercept
- 1 m
- From
- 29 m
- To
- 30 m
- Hole Depth
- 125.66 m
- Intercept Depth
- 23.3 m
Classification
- Deposit Type
- vms
- Program
- resource
- Sample Type
- drill
- Group ID
- 26MCDD025:29-30
- Mining Method
- open_pit
Location
- Easting
- 259875.9
- Northing
- 7421260.3
- Elevation
- 91.1 m
- Azimuth
- 0 °
- Dip
- -89.4 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Laboratories in Brisbane
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- Yes
Compositing
- Cutoff Grade
- 1
- Cutoff Unit
- % Zn
- Dilution Disclosed
- Yes
- Max Dilution
- 2 m
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-10-06T00:00:00.000Z
Reasoning: This is a good lead intercept from the first pontoon drilling, exceeding the block model and indicating significant mineralization beneath the pit.
Positive factors
- Good lead grade for VMS deposit type.
- Part of the first pontoon drilling program, indicating high novelty.
- Exceeds the existing resource block model.
Negative factors
- True width not known.
Evidence · table
“0.21”
Context: 1.0
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Compositing Transparentpositive
Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Why it applies: cutoff_grade and internal dilution are both stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
26MCDD025Mt Chalmers · copperGrade: 0.57Grade Unit: %Intercept: 5 mView all detailsHide details
Identity
- Hole ID
- 26MCDD025
- Project
- Mt Chalmers
- Commodity
- copper
- Region
- australia_qld
- Reported Region
- australia_qld
- Ticker
- QML
Geometry
- Grade
- 0.57
- Grade Unit
- %
- Intercept
- 5 m
- From
- 44 m
- To
- 49 m
- Hole Depth
- 125.66 m
- Intercept Depth
- 23.3 m
Classification
- Deposit Type
- vms
- Program
- resource
- Sample Type
- drill
- Group ID
- 26MCDD025:44-49
- Mining Method
- open_pit
Location
- Easting
- 259875.9
- Northing
- 7421260.3
- Elevation
- 91.1 m
- Azimuth
- 0 °
- Dip
- -89.4 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Laboratories in Brisbane
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- Yes
Compositing
- Cutoff Grade
- 0.2
- Cutoff Unit
- % Cu
- Dilution Disclosed
- Yes
- Max Dilution
- 2 m
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-10-06T00:00:00.000Z
Reasoning: This is a moderate copper intercept from the first pontoon drilling, exceeding the block model and indicating significant mineralization beneath the pit.
Positive factors
- Moderate copper grade for VMS deposit type.
- Part of the first pontoon drilling program, indicating high novelty.
- Exceeds the existing resource block model.
Negative factors
- True width not known.
Evidence · table
“0.57”
Context: 5.0
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Compositing Transparentpositive
Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Why it applies: cutoff_grade and internal dilution are both stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
26MCDD025Mt Chalmers · goldGrade: 0.5Grade Unit: g/tIntercept: 5 mView all detailsHide details
Identity
- Hole ID
- 26MCDD025
- Project
- Mt Chalmers
- Commodity
- gold
- Region
- australia_qld
- Reported Region
- australia_qld
- Ticker
- QML
Geometry
- Grade
- 0.5
- Grade Unit
- g/t
- Intercept
- 5 m
- From
- 44 m
- To
- 49 m
- Hole Depth
- 125.66 m
- Intercept Depth
- 23.3 m
Classification
- Deposit Type
- vms
- Program
- resource
- Sample Type
- drill
- Group ID
- 26MCDD025:44-49
- Mining Method
- open_pit
Location
- Easting
- 259875.9
- Northing
- 7421260.3
- Elevation
- 91.1 m
- Azimuth
- 0 °
- Dip
- -89.4 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Laboratories in Brisbane
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- Yes
Compositing
- Cutoff Grade
- 0.2
- Cutoff Unit
- % Cu
- Dilution Disclosed
- Yes
- Max Dilution
- 2 m
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-10-06T00:00:00.000Z
Reasoning: This is a moderate gold intercept from the first pontoon drilling, exceeding the block model and indicating significant mineralization beneath the pit.
Positive factors
- Moderate gold grade for VMS deposit type.
- Part of the first pontoon drilling program, indicating high novelty.
- Exceeds the existing resource block model.
Negative factors
- True width not known.
Evidence · table
“0.50”
Context: 5.0
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Compositing Transparentpositive
Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Why it applies: cutoff_grade and internal dilution are both stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
26MCDD025Mt Chalmers · silverGrade: 7Grade Unit: g/tIntercept: 5 mView all detailsHide details
Identity
- Hole ID
- 26MCDD025
- Project
- Mt Chalmers
- Commodity
- silver
- Region
- australia_qld
- Reported Region
- australia_qld
- Ticker
- QML
Geometry
- Grade
- 7
- Grade Unit
- g/t
- Intercept
- 5 m
- From
- 44 m
- To
- 49 m
- Hole Depth
- 125.66 m
- Intercept Depth
- 23.3 m
Classification
- Deposit Type
- vms
- Program
- resource
- Sample Type
- drill
- Group ID
- 26MCDD025:44-49
- Mining Method
- open_pit
Location
- Easting
- 259875.9
- Northing
- 7421260.3
- Elevation
- 91.1 m
- Azimuth
- 0 °
- Dip
- -89.4 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Laboratories in Brisbane
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- Yes
Compositing
- Cutoff Grade
- 0.2
- Cutoff Unit
- % Cu
- Dilution Disclosed
- Yes
- Max Dilution
- 2 m
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-10-06T00:00:00.000Z
Reasoning: This is a weak silver intercept from the first pontoon drilling, exceeding the block model and indicating significant mineralization beneath the pit.
Positive factors
- Part of the first pontoon drilling program, indicating high novelty.
- Exceeds the existing resource block model.
Negative factors
- True width not known.
- Weak silver grade for VMS deposit type.
Evidence · table
“7”
Context: 5.0
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Compositing Transparentpositive
Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Why it applies: cutoff_grade and internal dilution are both stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
26MCDD025Mt Chalmers · zincGrade: 0.2Grade Unit: %Intercept: 5 mView all detailsHide details
Identity
- Hole ID
- 26MCDD025
- Project
- Mt Chalmers
- Commodity
- zinc
- Region
- australia_qld
- Reported Region
- australia_qld
- Ticker
- QML
Geometry
- Grade
- 0.2
- Grade Unit
- %
- Intercept
- 5 m
- From
- 44 m
- To
- 49 m
- Hole Depth
- 125.66 m
- Intercept Depth
- 23.3 m
Classification
- Deposit Type
- vms
- Program
- resource
- Sample Type
- drill
- Group ID
- 26MCDD025:44-49
- Mining Method
- open_pit
Location
- Easting
- 259875.9
- Northing
- 7421260.3
- Elevation
- 91.1 m
- Azimuth
- 0 °
- Dip
- -89.4 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Laboratories in Brisbane
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- Yes
Compositing
- Cutoff Grade
- 0.2
- Cutoff Unit
- % Cu
- Dilution Disclosed
- Yes
- Max Dilution
- 2 m
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-10-06T00:00:00.000Z
Reasoning: This is a weak zinc intercept from the first pontoon drilling, exceeding the block model and indicating significant mineralization beneath the pit.
Positive factors
- Part of the first pontoon drilling program, indicating high novelty.
- Exceeds the existing resource block model.
Negative factors
- True width not known.
- Weak zinc grade for VMS deposit type.
Evidence · table
“0.20”
Context: 5.0
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Compositing Transparentpositive
Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Why it applies: cutoff_grade and internal dilution are both stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
26MCDD025Mt Chalmers · leadGrade: 0.04Grade Unit: %Intercept: 5 mView all detailsHide details
Identity
- Hole ID
- 26MCDD025
- Project
- Mt Chalmers
- Commodity
- lead
- Region
- australia_qld
- Reported Region
- australia_qld
- Ticker
- QML
Geometry
- Grade
- 0.04
- Grade Unit
- %
- Intercept
- 5 m
- From
- 44 m
- To
- 49 m
- Hole Depth
- 125.66 m
- Intercept Depth
- 23.3 m
Classification
- Deposit Type
- vms
- Program
- resource
- Sample Type
- drill
- Group ID
- 26MCDD025:44-49
- Mining Method
- open_pit
Location
- Easting
- 259875.9
- Northing
- 7421260.3
- Elevation
- 91.1 m
- Azimuth
- 0 °
- Dip
- -89.4 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Laboratories in Brisbane
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- Yes
Compositing
- Cutoff Grade
- 0.2
- Cutoff Unit
- % Cu
- Dilution Disclosed
- Yes
- Max Dilution
- 2 m
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-10-06T00:00:00.000Z
Reasoning: This is a weak lead intercept from the first pontoon drilling, exceeding the block model and indicating significant mineralization beneath the pit.
Positive factors
- Part of the first pontoon drilling program, indicating high novelty.
- Exceeds the existing resource block model.
Negative factors
- True width not known.
- Weak lead grade for VMS deposit type.
Evidence · table
“0.04”
Context: 5.0
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Compositing Transparentpositive
Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Why it applies: cutoff_grade and internal dilution are both stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
26MCDD025Mt Chalmers · copperGrade: 1.07Grade Unit: %Intercept: 1 mView all detailsHide details
Identity
- Hole ID
- 26MCDD025
- Project
- Mt Chalmers
- Commodity
- copper
- Region
- australia_qld
- Reported Region
- australia_qld
- Ticker
- QML
Geometry
- Grade
- 1.07
- Grade Unit
- %
- Intercept
- 1 m
- From
- 44 m
- To
- 45 m
- Hole Depth
- 125.66 m
- Intercept Depth
- 23.3 m
Classification
- Deposit Type
- vms
- Program
- resource
- Sample Type
- drill
- Group ID
- 26MCDD025:44-45
- Mining Method
- open_pit
Location
- Easting
- 259875.9
- Northing
- 7421260.3
- Elevation
- 91.1 m
- Azimuth
- 0 °
- Dip
- -89.4 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Laboratories in Brisbane
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- Yes
Compositing
- Cutoff Grade
- 0.2
- Cutoff Unit
- % Cu
- Dilution Disclosed
- Yes
- Max Dilution
- 2 m
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-10-06T00:00:00.000Z
Reasoning: This is a good copper intercept from the first pontoon drilling, exceeding the block model and indicating significant mineralization beneath the pit.
Positive factors
- Good copper grade for VMS deposit type.
- Part of the first pontoon drilling program, indicating high novelty.
- Exceeds the existing resource block model.
Negative factors
- True width not known.
Evidence · table
“1.07”
Context: 1.0
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Compositing Transparentpositive
Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Why it applies: cutoff_grade and internal dilution are both stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
26MCDD025Mt Chalmers · goldGrade: 1.18Grade Unit: g/tIntercept: 1 mView all detailsHide details
Identity
- Hole ID
- 26MCDD025
- Project
- Mt Chalmers
- Commodity
- gold
- Region
- australia_qld
- Reported Region
- australia_qld
- Ticker
- QML
Geometry
- Grade
- 1.18
- Grade Unit
- g/t
- Intercept
- 1 m
- From
- 44 m
- To
- 45 m
- Hole Depth
- 125.66 m
- Intercept Depth
- 23.3 m
Classification
- Deposit Type
- vms
- Program
- resource
- Sample Type
- drill
- Group ID
- 26MCDD025:44-45
- Mining Method
- open_pit
Location
- Easting
- 259875.9
- Northing
- 7421260.3
- Elevation
- 91.1 m
- Azimuth
- 0 °
- Dip
- -89.4 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Laboratories in Brisbane
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- Yes
Compositing
- Cutoff Grade
- 0.2
- Cutoff Unit
- % Cu
- Dilution Disclosed
- Yes
- Max Dilution
- 2 m
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-10-06T00:00:00.000Z
Reasoning: This is a good gold intercept from the first pontoon drilling, exceeding the block model and indicating significant mineralization beneath the pit.
Positive factors
- Good gold grade for VMS deposit type.
- Part of the first pontoon drilling program, indicating high novelty.
- Exceeds the existing resource block model.
Negative factors
- True width not known.
Evidence · table
“1.18”
Context: 1.0
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Compositing Transparentpositive
Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Why it applies: cutoff_grade and internal dilution are both stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
26MCDD025Mt Chalmers · silverGrade: 10Grade Unit: g/tIntercept: 1 mView all detailsHide details
Identity
- Hole ID
- 26MCDD025
- Project
- Mt Chalmers
- Commodity
- silver
- Region
- australia_qld
- Reported Region
- australia_qld
- Ticker
- QML
Geometry
- Grade
- 10
- Grade Unit
- g/t
- Intercept
- 1 m
- From
- 44 m
- To
- 45 m
- Hole Depth
- 125.66 m
- Intercept Depth
- 23.3 m
Classification
- Deposit Type
- vms
- Program
- resource
- Sample Type
- drill
- Group ID
- 26MCDD025:44-45
- Mining Method
- open_pit
Location
- Easting
- 259875.9
- Northing
- 7421260.3
- Elevation
- 91.1 m
- Azimuth
- 0 °
- Dip
- -89.4 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Laboratories in Brisbane
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- Yes
Compositing
- Cutoff Grade
- 0.2
- Cutoff Unit
- % Cu
- Dilution Disclosed
- Yes
- Max Dilution
- 2 m
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-10-06T00:00:00.000Z
Reasoning: This is a weak silver intercept from the first pontoon drilling, exceeding the block model and indicating significant mineralization beneath the pit.
Positive factors
- Part of the first pontoon drilling program, indicating high novelty.
- Exceeds the existing resource block model.
Negative factors
- True width not known.
- Weak silver grade for VMS deposit type.
Evidence · table
“10”
Context: 1.0
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Compositing Transparentpositive
Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Why it applies: cutoff_grade and internal dilution are both stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
26MCDD025Mt Chalmers · zincGrade: 0.65Grade Unit: %Intercept: 1 mView all detailsHide details
Identity
- Hole ID
- 26MCDD025
- Project
- Mt Chalmers
- Commodity
- zinc
- Region
- australia_qld
- Reported Region
- australia_qld
- Ticker
- QML
Geometry
- Grade
- 0.65
- Grade Unit
- %
- Intercept
- 1 m
- From
- 44 m
- To
- 45 m
- Hole Depth
- 125.66 m
- Intercept Depth
- 23.3 m
Classification
- Deposit Type
- vms
- Program
- resource
- Sample Type
- drill
- Group ID
- 26MCDD025:44-45
- Mining Method
- open_pit
Location
- Easting
- 259875.9
- Northing
- 7421260.3
- Elevation
- 91.1 m
- Azimuth
- 0 °
- Dip
- -89.4 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Laboratories in Brisbane
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- Yes
Compositing
- Cutoff Grade
- 0.2
- Cutoff Unit
- % Cu
- Dilution Disclosed
- Yes
- Max Dilution
- 2 m
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-10-06T00:00:00.000Z
Reasoning: This is a moderate zinc intercept from the first pontoon drilling, exceeding the block model and indicating significant mineralization beneath the pit.
Positive factors
- Moderate zinc grade for VMS deposit type.
- Part of the first pontoon drilling program, indicating high novelty.
- Exceeds the existing resource block model.
Negative factors
- True width not known.
Evidence · table
“0.65”
Context: 1.0
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Compositing Transparentpositive
Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Why it applies: cutoff_grade and internal dilution are both stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
26MCDD025Mt Chalmers · leadGrade: 0.08Grade Unit: %Intercept: 1 mView all detailsHide details
Identity
- Hole ID
- 26MCDD025
- Project
- Mt Chalmers
- Commodity
- lead
- Region
- australia_qld
- Reported Region
- australia_qld
- Ticker
- QML
Geometry
- Grade
- 0.08
- Grade Unit
- %
- Intercept
- 1 m
- From
- 44 m
- To
- 45 m
- Hole Depth
- 125.66 m
- Intercept Depth
- 23.3 m
Classification
- Deposit Type
- vms
- Program
- resource
- Sample Type
- drill
- Group ID
- 26MCDD025:44-45
- Mining Method
- open_pit
Location
- Easting
- 259875.9
- Northing
- 7421260.3
- Elevation
- 91.1 m
- Azimuth
- 0 °
- Dip
- -89.4 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Laboratories in Brisbane
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- Yes
Compositing
- Cutoff Grade
- 0.2
- Cutoff Unit
- % Cu
- Dilution Disclosed
- Yes
- Max Dilution
- 2 m
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-10-06T00:00:00.000Z
Reasoning: This is a weak lead intercept from the first pontoon drilling, exceeding the block model and indicating significant mineralization beneath the pit.
Positive factors
- Part of the first pontoon drilling program, indicating high novelty.
- Exceeds the existing resource block model.
Negative factors
- True width not known.
- Weak lead grade for VMS deposit type.
Evidence · table
“0.08”
Context: 1.0
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Compositing Transparentpositive
Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Why it applies: cutoff_grade and internal dilution are both stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
26MCDD025Mt Chalmers · copperGrade: 0.45Grade Unit: %Intercept: 4 mView all detailsHide details
Identity
- Hole ID
- 26MCDD025
- Project
- Mt Chalmers
- Commodity
- copper
- Region
- australia_qld
- Reported Region
- australia_qld
- Ticker
- QML
Geometry
- Grade
- 0.45
- Grade Unit
- %
- Intercept
- 4 m
- From
- 52 m
- To
- 56 m
- Hole Depth
- 125.66 m
- Intercept Depth
- 23.3 m
Classification
- Deposit Type
- vms
- Program
- resource
- Sample Type
- drill
- Group ID
- 26MCDD025:52-56
- Mining Method
- open_pit
Location
- Easting
- 259875.9
- Northing
- 7421260.3
- Elevation
- 91.1 m
- Azimuth
- 0 °
- Dip
- -89.4 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Laboratories in Brisbane
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- Yes
Compositing
- Cutoff Grade
- 0.2
- Cutoff Unit
- % Cu
- Dilution Disclosed
- Yes
- Max Dilution
- 2 m
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-10-06T00:00:00.000Z
Reasoning: This is a moderate copper intercept from the first pontoon drilling, exceeding the block model and indicating significant mineralization beneath the pit.
Positive factors
- Moderate copper grade for VMS deposit type.
- Part of the first pontoon drilling program, indicating high novelty.
- Exceeds the existing resource block model.
Negative factors
- True width not known.
Evidence · table
“0.45”
Context: 4.0
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Compositing Transparentpositive
Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Why it applies: cutoff_grade and internal dilution are both stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
26MCDD025Mt Chalmers · goldGrade: 0.23Grade Unit: g/tIntercept: 4 mView all detailsHide details
Identity
- Hole ID
- 26MCDD025
- Project
- Mt Chalmers
- Commodity
- gold
- Region
- australia_qld
- Reported Region
- australia_qld
- Ticker
- QML
Geometry
- Grade
- 0.23
- Grade Unit
- g/t
- Intercept
- 4 m
- From
- 52 m
- To
- 56 m
- Hole Depth
- 125.66 m
- Intercept Depth
- 23.3 m
Classification
- Deposit Type
- vms
- Program
- resource
- Sample Type
- drill
- Group ID
- 26MCDD025:52-56
- Mining Method
- open_pit
Location
- Easting
- 259875.9
- Northing
- 7421260.3
- Elevation
- 91.1 m
- Azimuth
- 0 °
- Dip
- -89.4 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Laboratories in Brisbane
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- Yes
Compositing
- Cutoff Grade
- 0.2
- Cutoff Unit
- % Cu
- Dilution Disclosed
- Yes
- Max Dilution
- 2 m
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-10-06T00:00:00.000Z
Reasoning: This is a weak gold intercept from the first pontoon drilling, exceeding the block model and indicating significant mineralization beneath the pit.
Positive factors
- Part of the first pontoon drilling program, indicating high novelty.
- Exceeds the existing resource block model.
Negative factors
- True width not known.
- Weak gold grade for VMS deposit type.
Evidence · table
“0.23”
Context: 4.0
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Compositing Transparentpositive
Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Why it applies: cutoff_grade and internal dilution are both stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
26MCDD025Mt Chalmers · silverGrade: 8Grade Unit: g/tIntercept: 4 mView all detailsHide details
Identity
- Hole ID
- 26MCDD025
- Project
- Mt Chalmers
- Commodity
- silver
- Region
- australia_qld
- Reported Region
- australia_qld
- Ticker
- QML
Geometry
- Grade
- 8
- Grade Unit
- g/t
- Intercept
- 4 m
- From
- 52 m
- To
- 56 m
- Hole Depth
- 125.66 m
- Intercept Depth
- 23.3 m
Classification
- Deposit Type
- vms
- Program
- resource
- Sample Type
- drill
- Group ID
- 26MCDD025:52-56
- Mining Method
- open_pit
Location
- Easting
- 259875.9
- Northing
- 7421260.3
- Elevation
- 91.1 m
- Azimuth
- 0 °
- Dip
- -89.4 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Laboratories in Brisbane
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- Yes
Compositing
- Cutoff Grade
- 0.2
- Cutoff Unit
- % Cu
- Dilution Disclosed
- Yes
- Max Dilution
- 2 m
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-10-06T00:00:00.000Z
Reasoning: This is a weak silver intercept from the first pontoon drilling, exceeding the block model and indicating significant mineralization beneath the pit.
Positive factors
- Part of the first pontoon drilling program, indicating high novelty.
- Exceeds the existing resource block model.
Negative factors
- True width not known.
- Weak silver grade for VMS deposit type.
Evidence · table
“8”
Context: 4.0
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Compositing Transparentpositive
Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Why it applies: cutoff_grade and internal dilution are both stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
26MCDD025Mt Chalmers · zincGrade: 0.08Grade Unit: %Intercept: 4 mView all detailsHide details
Identity
- Hole ID
- 26MCDD025
- Project
- Mt Chalmers
- Commodity
- zinc
- Region
- australia_qld
- Reported Region
- australia_qld
- Ticker
- QML
Geometry
- Grade
- 0.08
- Grade Unit
- %
- Intercept
- 4 m
- From
- 52 m
- To
- 56 m
- Hole Depth
- 125.66 m
- Intercept Depth
- 23.3 m
Classification
- Deposit Type
- vms
- Program
- resource
- Sample Type
- drill
- Group ID
- 26MCDD025:52-56
- Mining Method
- open_pit
Location
- Easting
- 259875.9
- Northing
- 7421260.3
- Elevation
- 91.1 m
- Azimuth
- 0 °
- Dip
- -89.4 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Laboratories in Brisbane
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- Yes
Compositing
- Cutoff Grade
- 0.2
- Cutoff Unit
- % Cu
- Dilution Disclosed
- Yes
- Max Dilution
- 2 m
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-10-06T00:00:00.000Z
Reasoning: This is a weak zinc intercept from the first pontoon drilling, exceeding the block model and indicating significant mineralization beneath the pit.
Positive factors
- Part of the first pontoon drilling program, indicating high novelty.
- Exceeds the existing resource block model.
Negative factors
- True width not known.
- Weak zinc grade for VMS deposit type.
Evidence · table
“0.08”
Context: 4.0
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Compositing Transparentpositive
Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Why it applies: cutoff_grade and internal dilution are both stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
26MCDD025Mt Chalmers · leadGrade: 0.07Grade Unit: %Intercept: 4 mView all detailsHide details
Identity
- Hole ID
- 26MCDD025
- Project
- Mt Chalmers
- Commodity
- lead
- Region
- australia_qld
- Reported Region
- australia_qld
- Ticker
- QML
Geometry
- Grade
- 0.07
- Grade Unit
- %
- Intercept
- 4 m
- From
- 52 m
- To
- 56 m
- Hole Depth
- 125.66 m
- Intercept Depth
- 23.3 m
Classification
- Deposit Type
- vms
- Program
- resource
- Sample Type
- drill
- Group ID
- 26MCDD025:52-56
- Mining Method
- open_pit
Location
- Easting
- 259875.9
- Northing
- 7421260.3
- Elevation
- 91.1 m
- Azimuth
- 0 °
- Dip
- -89.4 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Laboratories in Brisbane
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- Yes
Compositing
- Cutoff Grade
- 0.2
- Cutoff Unit
- % Cu
- Dilution Disclosed
- Yes
- Max Dilution
- 2 m
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-10-06T00:00:00.000Z
Reasoning: This is a weak lead intercept from the first pontoon drilling, exceeding the block model and indicating significant mineralization beneath the pit.
Positive factors
- Part of the first pontoon drilling program, indicating high novelty.
- Exceeds the existing resource block model.
Negative factors
- True width not known.
- Weak lead grade for VMS deposit type.
Evidence · table
“0.07”
Context: 4.0
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Compositing Transparentpositive
Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Why it applies: cutoff_grade and internal dilution are both stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
26MCDD025Mt Chalmers · copperGrade: 0.79Grade Unit: %Intercept: 26.7 mView all detailsHide details
Identity
- Hole ID
- 26MCDD025
- Project
- Mt Chalmers
- Commodity
- copper
- Region
- australia_qld
- Reported Region
- australia_qld
- Ticker
- QML
Geometry
- Grade
- 0.79
- Grade Unit
- %
- Intercept
- 26.7 m
- From
- 23.3 m
- To
- 50 m
- Hole Depth
- 125.66 m
- Intercept Depth
- 23.3 m
Classification
- Deposit Type
- vms
- Program
- resource
- Sample Type
- drill
- Group ID
- 26MCDD025:23.3-50
- Mining Method
- open_pit
Location
- Easting
- 259875.9
- Northing
- 7421260.3
- Elevation
- 91.1 m
- Azimuth
- 0 °
- Dip
- -89.4 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Laboratories in Brisbane
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- Yes
Compositing
- Cutoff Grade
- 0.2
- Cutoff Unit
- % Cu
- Dilution Disclosed
- Yes
- Max Dilution
- 2 m
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-10-06T00:00:00.000Z
Reasoning: This is a good copper intercept over a significant width from the first pontoon drilling, exceeding the block model and indicating significant mineralization beneath the pit.
Positive factors
- Good copper grade over a significant width for VMS deposit type.
- Part of the first pontoon drilling program, indicating high novelty.
- Exceeds the existing resource block model.
Negative factors
- True width not known.
Evidence · table
“0.79”
Context: 26.7
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Compositing Transparentpositive
Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Why it applies: cutoff_grade and internal dilution are both stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
26MCDD025Mt Chalmers · goldGrade: 0.87Grade Unit: g/tIntercept: 26.7 mView all detailsHide details
Identity
- Hole ID
- 26MCDD025
- Project
- Mt Chalmers
- Commodity
- gold
- Region
- australia_qld
- Reported Region
- australia_qld
- Ticker
- QML
Geometry
- Grade
- 0.87
- Grade Unit
- g/t
- Intercept
- 26.7 m
- From
- 23.3 m
- To
- 50 m
- Hole Depth
- 125.66 m
- Intercept Depth
- 23.3 m
Classification
- Deposit Type
- vms
- Program
- resource
- Sample Type
- drill
- Group ID
- 26MCDD025:23.3-50
- Mining Method
- open_pit
Location
- Easting
- 259875.9
- Northing
- 7421260.3
- Elevation
- 91.1 m
- Azimuth
- 0 °
- Dip
- -89.4 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Laboratories in Brisbane
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- Yes
Compositing
- Cutoff Grade
- 0.2
- Cutoff Unit
- % Cu
- Dilution Disclosed
- Yes
- Max Dilution
- 2 m
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-10-06T00:00:00.000Z
Reasoning: This is a moderate gold intercept over a significant width from the first pontoon drilling, exceeding the block model and indicating significant mineralization beneath the pit.
Positive factors
- Moderate gold grade over a significant width for VMS deposit type.
- Part of the first pontoon drilling program, indicating high novelty.
- Exceeds the existing resource block model.
Negative factors
- True width not known.
Evidence · table
“0.87”
Context: 26.7
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Compositing Transparentpositive
Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Why it applies: cutoff_grade and internal dilution are both stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
26MCDD025Mt Chalmers · silverGrade: 18Grade Unit: g/tIntercept: 26.7 mView all detailsHide details
Identity
- Hole ID
- 26MCDD025
- Project
- Mt Chalmers
- Commodity
- silver
- Region
- australia_qld
- Reported Region
- australia_qld
- Ticker
- QML
Geometry
- Grade
- 18
- Grade Unit
- g/t
- Intercept
- 26.7 m
- From
- 23.3 m
- To
- 50 m
- Hole Depth
- 125.66 m
- Intercept Depth
- 23.3 m
Classification
- Deposit Type
- vms
- Program
- resource
- Sample Type
- drill
- Group ID
- 26MCDD025:23.3-50
- Mining Method
- open_pit
Location
- Easting
- 259875.9
- Northing
- 7421260.3
- Elevation
- 91.1 m
- Azimuth
- 0 °
- Dip
- -89.4 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Laboratories in Brisbane
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- Yes
Compositing
- Cutoff Grade
- 0.2
- Cutoff Unit
- % Cu
- Dilution Disclosed
- Yes
- Max Dilution
- 2 m
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-10-06T00:00:00.000Z
Reasoning: This is a moderate silver intercept over a significant width from the first pontoon drilling, exceeding the block model and indicating significant mineralization beneath the pit.
Positive factors
- Moderate silver grade over a significant width for VMS deposit type.
- Part of the first pontoon drilling program, indicating high novelty.
- Exceeds the existing resource block model.
Negative factors
- True width not known.
Evidence · table
“18”
Context: 26.7
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Compositing Transparentpositive
Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Why it applies: cutoff_grade and internal dilution are both stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
26MCDD025Mt Chalmers · zincGrade: 0.84Grade Unit: %Intercept: 26.7 mView all detailsHide details
Identity
- Hole ID
- 26MCDD025
- Project
- Mt Chalmers
- Commodity
- zinc
- Region
- australia_qld
- Reported Region
- australia_qld
- Ticker
- QML
Geometry
- Grade
- 0.84
- Grade Unit
- %
- Intercept
- 26.7 m
- From
- 23.3 m
- To
- 50 m
- Hole Depth
- 125.66 m
- Intercept Depth
- 23.3 m
Classification
- Deposit Type
- vms
- Program
- resource
- Sample Type
- drill
- Group ID
- 26MCDD025:23.3-50
- Mining Method
- open_pit
Location
- Easting
- 259875.9
- Northing
- 7421260.3
- Elevation
- 91.1 m
- Azimuth
- 0 °
- Dip
- -89.4 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Laboratories in Brisbane
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- Yes
Compositing
- Cutoff Grade
- 0.2
- Cutoff Unit
- % Cu
- Dilution Disclosed
- Yes
- Max Dilution
- 2 m
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-10-06T00:00:00.000Z
Reasoning: This is a moderate zinc intercept over a significant width from the first pontoon drilling, exceeding the block model and indicating significant mineralization beneath the pit.
Positive factors
- Moderate zinc grade over a significant width for VMS deposit type.
- Part of the first pontoon drilling program, indicating high novelty.
- Exceeds the existing resource block model.
Negative factors
- True width not known.
Evidence · table
“0.84”
Context: 26.7
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Compositing Transparentpositive
Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Why it applies: cutoff_grade and internal dilution are both stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
26MCDD025Mt Chalmers · leadGrade: 0.37Grade Unit: %Intercept: 26.7 mHistorical resultNeeds review: historical_restatementView all detailsHide details
Identity
- Hole ID
- 26MCDD025
- Project
- Mt Chalmers
- Commodity
- lead
- Region
- australia_qld
- Reported Region
- australia_qld
- Ticker
- QML
Geometry
- Grade
- 0.37
- Grade Unit
- %
- Intercept
- 26.7 m
- From
- 23.3 m
- To
- 50 m
- Hole Depth
- 125.66 m
- Intercept Depth
- 23.3 m
Classification
- Deposit Type
- vms
- Program
- resource
- Sample Type
- drill
- Group ID
- 26MCDD025:23.3-50
- Mining Method
- open_pit
Location
- Easting
- 259875.9
- Northing
- 7421260.3
- Elevation
- 91.1 m
- Azimuth
- 0 °
- Dip
- -89.4 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Laboratories in Brisbane
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- Yes
Compositing
- Cutoff Grade
- 0.2
- Cutoff Unit
- % Cu
- Dilution Disclosed
- Yes
- Max Dilution
- 2 m
Review
- Needs Review
- Yes
- Review Reason
- historical_restatement
- Interp. Status
- scored
- Historical
- Yes
Dates
- Event date
- 2026-10-06T00:00:00.000Z
Reasoning: This is a moderate lead intercept over a significant width from the first pontoon drilling, exceeding the block model and indicating significant mineralization beneath the pit.
Positive factors
- Moderate lead grade over a significant width for VMS deposit type.
- Part of the first pontoon drilling program, indicating high novelty.
- Exceeds the existing resource block model.
Negative factors
- True width not known.
Evidence · table
“0.37”
Context: 26.7
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Compositing Transparentpositive
Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Why it applies: cutoff_grade and internal dilution are both stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
26MCDD025Mt Chalmers · copperGrade: 0.44Grade Unit: %Intercept: 3 mView all detailsHide details
Identity
- Hole ID
- 26MCDD025
- Project
- Mt Chalmers
- Commodity
- copper
- Region
- australia_qld
- Reported Region
- australia_qld
- Ticker
- QML
Geometry
- Grade
- 0.44
- Grade Unit
- %
- Intercept
- 3 m
- From
- 52 m
- To
- 55 m
- Hole Depth
- 125.66 m
- Intercept Depth
- 23.3 m
Classification
- Deposit Type
- vms
- Program
- resource
- Sample Type
- drill
- Group ID
- 26MCDD025:52-55
- Mining Method
- open_pit
Location
- Easting
- 259875.9
- Northing
- 7421260.3
- Elevation
- 91.1 m
- Azimuth
- 0 °
- Dip
- -89.4 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Laboratories in Brisbane
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- Yes
Compositing
- Cutoff Grade
- 0.2
- Cutoff Unit
- % Cu
- Dilution Disclosed
- Yes
- Max Dilution
- 2 m
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-10-06T00:00:00.000Z
Reasoning: This is a moderate copper intercept from the first pontoon drilling, exceeding the block model and indicating significant mineralization beneath the pit.
Positive factors
- Moderate copper grade for VMS deposit type.
- Part of the first pontoon drilling program, indicating high novelty.
- Exceeds the existing resource block model.
Negative factors
- True width not known.
Evidence · table
“0.44”
Context: 3.0
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Compositing Transparentpositive
Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Why it applies: cutoff_grade and internal dilution are both stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
26MCDD025Mt Chalmers · goldGrade: 0.24Grade Unit: g/tIntercept: 3 mView all detailsHide details
Identity
- Hole ID
- 26MCDD025
- Project
- Mt Chalmers
- Commodity
- gold
- Region
- australia_qld
- Reported Region
- australia_qld
- Ticker
- QML
Geometry
- Grade
- 0.24
- Grade Unit
- g/t
- Intercept
- 3 m
- From
- 52 m
- To
- 55 m
- Hole Depth
- 125.66 m
- Intercept Depth
- 23.3 m
Classification
- Deposit Type
- vms
- Program
- resource
- Sample Type
- drill
- Group ID
- 26MCDD025:52-55
- Mining Method
- open_pit
Location
- Easting
- 259875.9
- Northing
- 7421260.3
- Elevation
- 91.1 m
- Azimuth
- 0 °
- Dip
- -89.4 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Laboratories in Brisbane
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- Yes
Compositing
- Cutoff Grade
- 0.2
- Cutoff Unit
- % Cu
- Dilution Disclosed
- Yes
- Max Dilution
- 2 m
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-10-06T00:00:00.000Z
Reasoning: This is a weak gold intercept from the first pontoon drilling, exceeding the block model and indicating significant mineralization beneath the pit.
Positive factors
- Part of the first pontoon drilling program, indicating high novelty.
- Exceeds the existing resource block model.
Negative factors
- True width not known.
- Weak gold grade for VMS deposit type.
Evidence · table
“0.24”
Context: 3.0
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Compositing Transparentpositive
Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Why it applies: cutoff_grade and internal dilution are both stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
26MCDD025Mt Chalmers · silverGrade: 8Grade Unit: g/tIntercept: 3 mView all detailsHide details
Identity
- Hole ID
- 26MCDD025
- Project
- Mt Chalmers
- Commodity
- silver
- Region
- australia_qld
- Reported Region
- australia_qld
- Ticker
- QML
Geometry
- Grade
- 8
- Grade Unit
- g/t
- Intercept
- 3 m
- From
- 52 m
- To
- 55 m
- Hole Depth
- 125.66 m
- Intercept Depth
- 23.3 m
Classification
- Deposit Type
- vms
- Program
- resource
- Sample Type
- drill
- Group ID
- 26MCDD025:52-55
- Mining Method
- open_pit
Location
- Easting
- 259875.9
- Northing
- 7421260.3
- Elevation
- 91.1 m
- Azimuth
- 0 °
- Dip
- -89.4 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Laboratories in Brisbane
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- Yes
Compositing
- Cutoff Grade
- 0.2
- Cutoff Unit
- % Cu
- Dilution Disclosed
- Yes
- Max Dilution
- 2 m
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-10-06T00:00:00.000Z
Reasoning: This is a weak silver intercept from the first pontoon drilling, exceeding the block model and indicating significant mineralization beneath the pit.
Positive factors
- Part of the first pontoon drilling program, indicating high novelty.
- Exceeds the existing resource block model.
Negative factors
- True width not known.
- Weak silver grade for VMS deposit type.
Evidence · table
“8”
Context: 3.0
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Compositing Transparentpositive
Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Why it applies: cutoff_grade and internal dilution are both stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
26MCDD025Mt Chalmers · zincGrade: 0.07Grade Unit: %Intercept: 3 mView all detailsHide details
Identity
- Hole ID
- 26MCDD025
- Project
- Mt Chalmers
- Commodity
- zinc
- Region
- australia_qld
- Reported Region
- australia_qld
- Ticker
- QML
Geometry
- Grade
- 0.07
- Grade Unit
- %
- Intercept
- 3 m
- From
- 52 m
- To
- 55 m
- Hole Depth
- 125.66 m
- Intercept Depth
- 23.3 m
Classification
- Deposit Type
- vms
- Program
- resource
- Sample Type
- drill
- Group ID
- 26MCDD025:52-55
- Mining Method
- open_pit
Location
- Easting
- 259875.9
- Northing
- 7421260.3
- Elevation
- 91.1 m
- Azimuth
- 0 °
- Dip
- -89.4 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Laboratories in Brisbane
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- Yes
Compositing
- Cutoff Grade
- 0.2
- Cutoff Unit
- % Cu
- Dilution Disclosed
- Yes
- Max Dilution
- 2 m
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-10-06T00:00:00.000Z
Reasoning: This is a weak zinc intercept from the first pontoon drilling, exceeding the block model and indicating significant mineralization beneath the pit.
Positive factors
- Part of the first pontoon drilling program, indicating high novelty.
- Exceeds the existing resource block model.
Negative factors
- True width not known.
- Weak zinc grade for VMS deposit type.
Evidence · table
“0.07”
Context: 3.0
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Compositing Transparentpositive
Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Why it applies: cutoff_grade and internal dilution are both stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
26MCDD025Mt Chalmers · leadGrade: 0.03Grade Unit: %Intercept: 3 mHistorical resultNeeds review: historical_restatementView all detailsHide details
Identity
- Hole ID
- 26MCDD025
- Project
- Mt Chalmers
- Commodity
- lead
- Region
- australia_qld
- Reported Region
- australia_qld
- Ticker
- QML
Geometry
- Grade
- 0.03
- Grade Unit
- %
- Intercept
- 3 m
- From
- 52 m
- To
- 55 m
- Hole Depth
- 125.66 m
- Intercept Depth
- 23.3 m
Classification
- Deposit Type
- vms
- Program
- resource
- Sample Type
- drill
- Group ID
- 26MCDD025:52-55
- Mining Method
- open_pit
Location
- Easting
- 259875.9
- Northing
- 7421260.3
- Elevation
- 91.1 m
- Azimuth
- 0 °
- Dip
- -89.4 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Laboratories in Brisbane
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- Yes
Compositing
- Cutoff Grade
- 0.2
- Cutoff Unit
- % Cu
- Dilution Disclosed
- Yes
- Max Dilution
- 2 m
Review
- Needs Review
- Yes
- Review Reason
- historical_restatement
- Interp. Status
- scored
- Historical
- Yes
Dates
- Event date
- 2026-10-06T00:00:00.000Z
Reasoning: This is a weak lead intercept from the first pontoon drilling, exceeding the block model and indicating significant mineralization beneath the pit.
Positive factors
- Part of the first pontoon drilling program, indicating high novelty.
- Exceeds the existing resource block model.
Negative factors
- True width not known.
- Weak lead grade for VMS deposit type.
Evidence · table
“0.03”
Context: 3.0
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Compositing Transparentpositive
Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Why it applies: cutoff_grade and internal dilution are both stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
26MCDD025Mt Chalmers · copperGrade: 0.1Grade Unit: %Intercept: 1 mHistorical resultNeeds review: historical_restatementView all detailsHide details
Identity
- Hole ID
- 26MCDD025
- Project
- Mt Chalmers
- Commodity
- copper
- Region
- australia_qld
- Reported Region
- australia_qld
- Ticker
- QML
Geometry
- Grade
- 0.1
- Grade Unit
- %
- Intercept
- 1 m
- From
- 59 m
- To
- 60 m
- Hole Depth
- 125.66 m
- Intercept Depth
- 23.3 m
Classification
- Deposit Type
- vms
- Program
- resource
- Sample Type
- drill
- Group ID
- 26MCDD025:59-60
- Mining Method
- open_pit
Location
- Easting
- 259875.9
- Northing
- 7421260.3
- Elevation
- 91.1 m
- Azimuth
- 0 °
- Dip
- -89.4 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Laboratories in Brisbane
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- Yes
Compositing
- Cutoff Grade
- 0.2
- Cutoff Unit
- % Cu
- Dilution Disclosed
- Yes
- Max Dilution
- 2 m
Review
- Needs Review
- Yes
- Review Reason
- historical_restatement
- Interp. Status
- scored
- Historical
- Yes
Dates
- Event date
- 2026-10-06T00:00:00.000Z
Reasoning: This is a weak copper intercept from the first pontoon drilling, exceeding the block model and indicating significant mineralization beneath the pit.
Positive factors
- Part of the first pontoon drilling program, indicating high novelty.
- Exceeds the existing resource block model.
Negative factors
- True width not known.
- Weak copper grade for VMS deposit type.
Evidence · table
“0.10”
Context: 1.0
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Compositing Transparentpositive
Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Why it applies: cutoff_grade and internal dilution are both stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
26MCDD025Mt Chalmers · goldGrade: 0.23Grade Unit: g/tIntercept: 1 mView all detailsHide details
Identity
- Hole ID
- 26MCDD025
- Project
- Mt Chalmers
- Commodity
- gold
- Region
- australia_qld
- Reported Region
- australia_qld
- Ticker
- QML
Geometry
- Grade
- 0.23
- Grade Unit
- g/t
- Intercept
- 1 m
- From
- 59 m
- To
- 60 m
- Hole Depth
- 125.66 m
- Intercept Depth
- 23.3 m
Classification
- Deposit Type
- vms
- Program
- resource
- Sample Type
- drill
- Group ID
- 26MCDD025:59-60
- Mining Method
- open_pit
Location
- Easting
- 259875.9
- Northing
- 7421260.3
- Elevation
- 91.1 m
- Azimuth
- 0 °
- Dip
- -89.4 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Laboratories in Brisbane
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- Yes
Compositing
- Cutoff Grade
- 0.2
- Cutoff Unit
- % Cu
- Dilution Disclosed
- Yes
- Max Dilution
- 2 m
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-10-06T00:00:00.000Z
Reasoning: This is a weak gold intercept from the first pontoon drilling, exceeding the block model and indicating significant mineralization beneath the pit.
Positive factors
- Part of the first pontoon drilling program, indicating high novelty.
- Exceeds the existing resource block model.
Negative factors
- True width not known.
- Weak gold grade for VMS deposit type.
Evidence · table
“0.23”
Context: 1.0
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Compositing Transparentpositive
Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Why it applies: cutoff_grade and internal dilution are both stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
26MCDD025Mt Chalmers · silverGrade: 3Grade Unit: g/tIntercept: 1 mView all detailsHide details
Identity
- Hole ID
- 26MCDD025
- Project
- Mt Chalmers
- Commodity
- silver
- Region
- australia_qld
- Reported Region
- australia_qld
- Ticker
- QML
Geometry
- Grade
- 3
- Grade Unit
- g/t
- Intercept
- 1 m
- From
- 59 m
- To
- 60 m
- Hole Depth
- 125.66 m
- Intercept Depth
- 23.3 m
Classification
- Deposit Type
- vms
- Program
- resource
- Sample Type
- drill
- Group ID
- 26MCDD025:59-60
- Mining Method
- open_pit
Location
- Easting
- 259875.9
- Northing
- 7421260.3
- Elevation
- 91.1 m
- Azimuth
- 0 °
- Dip
- -89.4 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Laboratories in Brisbane
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- Yes
Compositing
- Cutoff Grade
- 0.2
- Cutoff Unit
- % Cu
- Dilution Disclosed
- Yes
- Max Dilution
- 2 m
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-10-06T00:00:00.000Z
Reasoning: This is a weak silver intercept from the first pontoon drilling, exceeding the block model and indicating significant mineralization beneath the pit.
Positive factors
- Part of the first pontoon drilling program, indicating high novelty.
- Exceeds the existing resource block model.
Negative factors
- True width not known.
- Weak silver grade for VMS deposit type.
Evidence · table
“3”
Context: 1.0
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Compositing Transparentpositive
Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Why it applies: cutoff_grade and internal dilution are both stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
26MCDD025Mt Chalmers · zincGrade: 0.13Grade Unit: %Intercept: 1 mView all detailsHide details
Identity
- Hole ID
- 26MCDD025
- Project
- Mt Chalmers
- Commodity
- zinc
- Region
- australia_qld
- Reported Region
- australia_qld
- Ticker
- QML
Geometry
- Grade
- 0.13
- Grade Unit
- %
- Intercept
- 1 m
- From
- 59 m
- To
- 60 m
- Hole Depth
- 125.66 m
- Intercept Depth
- 23.3 m
Classification
- Deposit Type
- vms
- Program
- resource
- Sample Type
- drill
- Group ID
- 26MCDD025:59-60
- Mining Method
- open_pit
Location
- Easting
- 259875.9
- Northing
- 7421260.3
- Elevation
- 91.1 m
- Azimuth
- 0 °
- Dip
- -89.4 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Laboratories in Brisbane
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- Yes
Compositing
- Cutoff Grade
- 0.2
- Cutoff Unit
- % Cu
- Dilution Disclosed
- Yes
- Max Dilution
- 2 m
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-10-06T00:00:00.000Z
Reasoning: This is a weak zinc intercept from the first pontoon drilling, exceeding the block model and indicating significant mineralization beneath the pit.
Positive factors
- Part of the first pontoon drilling program, indicating high novelty.
- Exceeds the existing resource block model.
Negative factors
- True width not known.
- Weak zinc grade for VMS deposit type.
Evidence · table
“0.13”
Context: 1.0
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Compositing Transparentpositive
Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Why it applies: cutoff_grade and internal dilution are both stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
26MCDD025Mt Chalmers · leadGrade: 0.04Grade Unit: %Intercept: 1 mView all detailsHide details
Identity
- Hole ID
- 26MCDD025
- Project
- Mt Chalmers
- Commodity
- lead
- Region
- australia_qld
- Reported Region
- australia_qld
- Ticker
- QML
Geometry
- Grade
- 0.04
- Grade Unit
- %
- Intercept
- 1 m
- From
- 59 m
- To
- 60 m
- Hole Depth
- 125.66 m
- Intercept Depth
- 23.3 m
Classification
- Deposit Type
- vms
- Program
- resource
- Sample Type
- drill
- Group ID
- 26MCDD025:59-60
- Mining Method
- open_pit
Location
- Easting
- 259875.9
- Northing
- 7421260.3
- Elevation
- 91.1 m
- Azimuth
- 0 °
- Dip
- -89.4 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Laboratories in Brisbane
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- Yes
Compositing
- Cutoff Grade
- 0.2
- Cutoff Unit
- % Cu
- Dilution Disclosed
- Yes
- Max Dilution
- 2 m
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-10-06T00:00:00.000Z
Reasoning: This is a weak lead intercept from the first pontoon drilling, exceeding the block model and indicating significant mineralization beneath the pit.
Positive factors
- Part of the first pontoon drilling program, indicating high novelty.
- Exceeds the existing resource block model.
Negative factors
- True width not known.
- Weak lead grade for VMS deposit type.
Evidence · table
“0.04”
Context: 1.0
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Compositing Transparentpositive
Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Why it applies: cutoff_grade and internal dilution are both stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
26MCDD027Mt Chalmers · copperGrade: 1.32Grade Unit: %Intercept: 11.3 mView all detailsHide details
Identity
- Hole ID
- 26MCDD027
- Project
- Mt Chalmers
- Commodity
- copper
- Region
- australia_qld
- Reported Region
- australia_qld
- Ticker
- QML
Geometry
- Grade
- 1.32
- Grade Unit
- %
- Intercept
- 11.3 m
- From
- 42.7 m
- To
- 54 m
- Hole Depth
- 67.7 m
- Intercept Depth
- 42.7 m
Classification
- Deposit Type
- vms
- Program
- resource
- Sample Type
- drill
- Group ID
- 26MCDD027:42.7-54
- Mining Method
- open_pit
Location
- Easting
- 259897.9
- Northing
- 7421238
- Elevation
- 91.5 m
- Azimuth
- 0 °
- Dip
- -90 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Laboratories in Brisbane
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- Yes
Compositing
- Cutoff Grade
- 0.2
- Cutoff Unit
- % Cu
- Dilution Disclosed
- Yes
- Max Dilution
- 2 m
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-10-06T00:00:00.000Z
Reasoning: This is a high-grade copper intercept from the first pontoon drilling, exceeding the block model and indicating significant mineralization beneath the pit.
Positive factors
- High-grade copper intercept for VMS deposit type.
- Part of the first pontoon drilling program, indicating high novelty.
- Exceeds the existing resource block model.
Negative factors
- True width not known.
Evidence · table
“1.32”
Context: 11.3
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Compositing Transparentpositive
Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Why it applies: cutoff_grade and internal dilution are both stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
26MCDD027Mt Chalmers · goldGrade: 0.43Grade Unit: g/tIntercept: 11.3 mView all detailsHide details
Identity
- Hole ID
- 26MCDD027
- Project
- Mt Chalmers
- Commodity
- gold
- Region
- australia_qld
- Reported Region
- australia_qld
- Ticker
- QML
Geometry
- Grade
- 0.43
- Grade Unit
- g/t
- Intercept
- 11.3 m
- From
- 42.7 m
- To
- 54 m
- Hole Depth
- 67.7 m
- Intercept Depth
- 42.7 m
Classification
- Deposit Type
- vms
- Program
- resource
- Sample Type
- drill
- Group ID
- 26MCDD027:42.7-54
- Mining Method
- open_pit
Location
- Easting
- 259897.9
- Northing
- 7421238
- Elevation
- 91.5 m
- Azimuth
- 0 °
- Dip
- -90 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Laboratories in Brisbane
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- Yes
Compositing
- Cutoff Grade
- 0.2
- Cutoff Unit
- % Cu
- Dilution Disclosed
- Yes
- Max Dilution
- 2 m
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-10-06T00:00:00.000Z
Reasoning: This is a moderate gold intercept from the first pontoon drilling, exceeding the block model and indicating significant mineralization beneath the pit.
Positive factors
- Moderate gold grade for VMS deposit type.
- Part of the first pontoon drilling program, indicating high novelty.
- Exceeds the existing resource block model.
Negative factors
- True width not known.
Evidence · table
“0.43”
Context: 11.3
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Compositing Transparentpositive
Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Why it applies: cutoff_grade and internal dilution are both stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
26MCDD027Mt Chalmers · silverGrade: 11Grade Unit: g/tIntercept: 11.3 mView all detailsHide details
Identity
- Hole ID
- 26MCDD027
- Project
- Mt Chalmers
- Commodity
- silver
- Region
- australia_qld
- Reported Region
- australia_qld
- Ticker
- QML
Geometry
- Grade
- 11
- Grade Unit
- g/t
- Intercept
- 11.3 m
- From
- 42.7 m
- To
- 54 m
- Hole Depth
- 67.7 m
- Intercept Depth
- 42.7 m
Classification
- Deposit Type
- vms
- Program
- resource
- Sample Type
- drill
- Group ID
- 26MCDD027:42.7-54
- Mining Method
- open_pit
Location
- Easting
- 259897.9
- Northing
- 7421238
- Elevation
- 91.5 m
- Azimuth
- 0 °
- Dip
- -90 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Laboratories in Brisbane
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- Yes
Compositing
- Cutoff Grade
- 0.2
- Cutoff Unit
- % Cu
- Dilution Disclosed
- Yes
- Max Dilution
- 2 m
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-10-06T00:00:00.000Z
Reasoning: This is a weak silver intercept from the first pontoon drilling, exceeding the block model and indicating significant mineralization beneath the pit.
Positive factors
- Part of the first pontoon drilling program, indicating high novelty.
- Exceeds the existing resource block model.
Negative factors
- True width not known.
- Weak silver grade for VMS deposit type.
Evidence · table
“11”
Context: 11.3
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Compositing Transparentpositive
Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Why it applies: cutoff_grade and internal dilution are both stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
26MCDD027Mt Chalmers · zincGrade: 0.36Grade Unit: %Intercept: 11.3 mView all detailsHide details
Identity
- Hole ID
- 26MCDD027
- Project
- Mt Chalmers
- Commodity
- zinc
- Region
- australia_qld
- Reported Region
- australia_qld
- Ticker
- QML
Geometry
- Grade
- 0.36
- Grade Unit
- %
- Intercept
- 11.3 m
- From
- 42.7 m
- To
- 54 m
- Hole Depth
- 67.7 m
- Intercept Depth
- 42.7 m
Classification
- Deposit Type
- vms
- Program
- resource
- Sample Type
- drill
- Group ID
- 26MCDD027:42.7-54
- Mining Method
- open_pit
Location
- Easting
- 259897.9
- Northing
- 7421238
- Elevation
- 91.5 m
- Azimuth
- 0 °
- Dip
- -90 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Laboratories in Brisbane
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- Yes
Compositing
- Cutoff Grade
- 0.2
- Cutoff Unit
- % Cu
- Dilution Disclosed
- Yes
- Max Dilution
- 2 m
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-10-06T00:00:00.000Z
Reasoning: This is a moderate zinc intercept from the first pontoon drilling, exceeding the block model and indicating significant mineralization beneath the pit.
Positive factors
- Moderate zinc grade for VMS deposit type.
- Part of the first pontoon drilling program, indicating high novelty.
- Exceeds the existing resource block model.
Negative factors
- True width not known.
Evidence · table
“0.36”
Context: 11.3
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Compositing Transparentpositive
Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Why it applies: cutoff_grade and internal dilution are both stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
26MCDD027Mt Chalmers · leadGrade: 0.06Grade Unit: %Intercept: 11.3 mView all detailsHide details
Identity
- Hole ID
- 26MCDD027
- Project
- Mt Chalmers
- Commodity
- lead
- Region
- australia_qld
- Reported Region
- australia_qld
- Ticker
- QML
Geometry
- Grade
- 0.06
- Grade Unit
- %
- Intercept
- 11.3 m
- From
- 42.7 m
- To
- 54 m
- Hole Depth
- 67.7 m
- Intercept Depth
- 42.7 m
Classification
- Deposit Type
- vms
- Program
- resource
- Sample Type
- drill
- Group ID
- 26MCDD027:42.7-54
- Mining Method
- open_pit
Location
- Easting
- 259897.9
- Northing
- 7421238
- Elevation
- 91.5 m
- Azimuth
- 0 °
- Dip
- -90 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Laboratories in Brisbane
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- Yes
Compositing
- Cutoff Grade
- 0.2
- Cutoff Unit
- % Cu
- Dilution Disclosed
- Yes
- Max Dilution
- 2 m
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-10-06T00:00:00.000Z
Reasoning: This is a weak lead intercept from the first pontoon drilling, exceeding the block model and indicating significant mineralization beneath the pit.
Positive factors
- Part of the first pontoon drilling program, indicating high novelty.
- Exceeds the existing resource block model.
Negative factors
- True width not known.
- Weak lead grade for VMS deposit type.
Evidence · table
“0.06”
Context: 11.3
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Compositing Transparentpositive
Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Why it applies: cutoff_grade and internal dilution are both stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
26MCDD027Mt Chalmers · copperGrade: 1.64Grade Unit: %Intercept: 8.3 mView all detailsHide details
Identity
- Hole ID
- 26MCDD027
- Project
- Mt Chalmers
- Commodity
- copper
- Region
- australia_qld
- Reported Region
- australia_qld
- Ticker
- QML
Geometry
- Grade
- 1.64
- Grade Unit
- %
- Intercept
- 8.3 m
- From
- 42.7 m
- To
- 51 m
- Hole Depth
- 67.7 m
- Intercept Depth
- 42.7 m
Classification
- Deposit Type
- vms
- Program
- resource
- Sample Type
- drill
- Group ID
- 26MCDD027:42.7-51
- Mining Method
- open_pit
Location
- Easting
- 259897.9
- Northing
- 7421238
- Elevation
- 91.5 m
- Azimuth
- 0 °
- Dip
- -90 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Laboratories in Brisbane
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- Yes
Compositing
- Cutoff Grade
- 0.2
- Cutoff Unit
- % Cu
- Dilution Disclosed
- Yes
- Max Dilution
- 2 m
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-10-06T00:00:00.000Z
Reasoning: This is a high-grade copper intercept from the first pontoon drilling, exceeding the block model and indicating significant mineralization beneath the pit.
Positive factors
- High-grade copper intercept for VMS deposit type.
- Part of the first pontoon drilling program, indicating high novelty.
- Exceeds the existing resource block model.
Negative factors
- True width not known.
Evidence · table
“1.64”
Context: 8.3
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Compositing Transparentpositive
Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Why it applies: cutoff_grade and internal dilution are both stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
26MCDD027Mt Chalmers · goldGrade: 0.51Grade Unit: g/tIntercept: 8.3 mView all detailsHide details
Identity
- Hole ID
- 26MCDD027
- Project
- Mt Chalmers
- Commodity
- gold
- Region
- australia_qld
- Reported Region
- australia_qld
- Ticker
- QML
Geometry
- Grade
- 0.51
- Grade Unit
- g/t
- Intercept
- 8.3 m
- From
- 42.7 m
- To
- 51 m
- Hole Depth
- 67.7 m
- Intercept Depth
- 42.7 m
Classification
- Deposit Type
- vms
- Program
- resource
- Sample Type
- drill
- Group ID
- 26MCDD027:42.7-51
- Mining Method
- open_pit
Location
- Easting
- 259897.9
- Northing
- 7421238
- Elevation
- 91.5 m
- Azimuth
- 0 °
- Dip
- -90 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Laboratories in Brisbane
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- Yes
Compositing
- Cutoff Grade
- 0.2
- Cutoff Unit
- % Cu
- Dilution Disclosed
- Yes
- Max Dilution
- 2 m
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-10-06T00:00:00.000Z
Reasoning: This is a moderate gold intercept from the first pontoon drilling, exceeding the block model and indicating significant mineralization beneath the pit.
Positive factors
- Moderate gold grade for VMS deposit type.
- Part of the first pontoon drilling program, indicating high novelty.
- Exceeds the existing resource block model.
Negative factors
- True width not known.
Evidence · table
“0.51”
Context: 8.3
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Compositing Transparentpositive
Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Why it applies: cutoff_grade and internal dilution are both stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
26MCDD027Mt Chalmers · silverGrade: 13Grade Unit: g/tIntercept: 8.3 mView all detailsHide details
Identity
- Hole ID
- 26MCDD027
- Project
- Mt Chalmers
- Commodity
- silver
- Region
- australia_qld
- Reported Region
- australia_qld
- Ticker
- QML
Geometry
- Grade
- 13
- Grade Unit
- g/t
- Intercept
- 8.3 m
- From
- 42.7 m
- To
- 51 m
- Hole Depth
- 67.7 m
- Intercept Depth
- 42.7 m
Classification
- Deposit Type
- vms
- Program
- resource
- Sample Type
- drill
- Group ID
- 26MCDD027:42.7-51
- Mining Method
- open_pit
Location
- Easting
- 259897.9
- Northing
- 7421238
- Elevation
- 91.5 m
- Azimuth
- 0 °
- Dip
- -90 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Laboratories in Brisbane
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- Yes
Compositing
- Cutoff Grade
- 0.2
- Cutoff Unit
- % Cu
- Dilution Disclosed
- Yes
- Max Dilution
- 2 m
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-10-06T00:00:00.000Z
Reasoning: This is a weak silver intercept from the first pontoon drilling, exceeding the block model and indicating significant mineralization beneath the pit.
Positive factors
- Part of the first pontoon drilling program, indicating high novelty.
- Exceeds the existing resource block model.
Negative factors
- True width not known.
- Weak silver grade for VMS deposit type.
Evidence · table
“13”
Context: 8.3
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Compositing Transparentpositive
Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Why it applies: cutoff_grade and internal dilution are both stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
26MCDD027Mt Chalmers · zincGrade: 0.44Grade Unit: %Intercept: 8.3 mView all detailsHide details
Identity
- Hole ID
- 26MCDD027
- Project
- Mt Chalmers
- Commodity
- zinc
- Region
- australia_qld
- Reported Region
- australia_qld
- Ticker
- QML
Geometry
- Grade
- 0.44
- Grade Unit
- %
- Intercept
- 8.3 m
- From
- 42.7 m
- To
- 51 m
- Hole Depth
- 67.7 m
- Intercept Depth
- 42.7 m
Classification
- Deposit Type
- vms
- Program
- resource
- Sample Type
- drill
- Group ID
- 26MCDD027:42.7-51
- Mining Method
- open_pit
Location
- Easting
- 259897.9
- Northing
- 7421238
- Elevation
- 91.5 m
- Azimuth
- 0 °
- Dip
- -90 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Laboratories in Brisbane
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- Yes
Compositing
- Cutoff Grade
- 0.2
- Cutoff Unit
- % Cu
- Dilution Disclosed
- Yes
- Max Dilution
- 2 m
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-10-06T00:00:00.000Z
Reasoning: This is a moderate zinc intercept from the first pontoon drilling, exceeding the block model and indicating significant mineralization beneath the pit.
Positive factors
- Moderate zinc grade for VMS deposit type.
- Part of the first pontoon drilling program, indicating high novelty.
- Exceeds the existing resource block model.
Negative factors
- True width not known.
Evidence · table
“0.44”
Context: 8.3
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Compositing Transparentpositive
Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Why it applies: cutoff_grade and internal dilution are both stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
26MCDD027Mt Chalmers · leadGrade: 0.07Grade Unit: %Intercept: 8.3 mView all detailsHide details
Identity
- Hole ID
- 26MCDD027
- Project
- Mt Chalmers
- Commodity
- lead
- Region
- australia_qld
- Reported Region
- australia_qld
- Ticker
- QML
Geometry
- Grade
- 0.07
- Grade Unit
- %
- Intercept
- 8.3 m
- From
- 42.7 m
- To
- 51 m
- Hole Depth
- 67.7 m
- Intercept Depth
- 42.7 m
Classification
- Deposit Type
- vms
- Program
- resource
- Sample Type
- drill
- Group ID
- 26MCDD027:42.7-51
- Mining Method
- open_pit
Location
- Easting
- 259897.9
- Northing
- 7421238
- Elevation
- 91.5 m
- Azimuth
- 0 °
- Dip
- -90 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Laboratories in Brisbane
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- Yes
Compositing
- Cutoff Grade
- 0.2
- Cutoff Unit
- % Cu
- Dilution Disclosed
- Yes
- Max Dilution
- 2 m
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-10-06T00:00:00.000Z
Reasoning: This is a weak lead intercept from the first pontoon drilling, exceeding the block model and indicating significant mineralization beneath the pit.
Positive factors
- Part of the first pontoon drilling program, indicating high novelty.
- Exceeds the existing resource block model.
Negative factors
- True width not known.
- Weak lead grade for VMS deposit type.
Evidence · table
“0.07”
Context: 8.3
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Compositing Transparentpositive
Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Why it applies: cutoff_grade and internal dilution are both stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
26MCDD027Mt Chalmers · copperGrade: 2.7Grade Unit: %Intercept: 3.3 mView all detailsHide details
Identity
- Hole ID
- 26MCDD027
- Project
- Mt Chalmers
- Commodity
- copper
- Region
- australia_qld
- Reported Region
- australia_qld
- Ticker
- QML
Geometry
- Grade
- 2.7
- Grade Unit
- %
- Intercept
- 3.3 m
- From
- 42.7 m
- To
- 46 m
- Hole Depth
- 67.7 m
- Intercept Depth
- 42.7 m
Classification
- Deposit Type
- vms
- Program
- resource
- Sample Type
- drill
- Group ID
- 26MCDD027:42.7-46
- Mining Method
- open_pit
Location
- Easting
- 259897.9
- Northing
- 7421238
- Elevation
- 91.5 m
- Azimuth
- 0 °
- Dip
- -90 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Laboratories in Brisbane
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- Yes
Compositing
- Cutoff Grade
- 0.2
- Cutoff Unit
- % Cu
- Dilution Disclosed
- Yes
- Max Dilution
- 2 m
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-10-06T00:00:00.000Z
Reasoning: This is an exceptional copper intercept from the first pontoon drilling, exceeding the block model and indicating significant mineralization beneath the pit.
Positive factors
- Exceptional copper grade for VMS deposit type.
- Part of the first pontoon drilling program, indicating high novelty.
- Exceeds the existing resource block model.
Negative factors
- True width not known.
Evidence · table
“2.70”
Context: 3.3
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Compositing Transparentpositive
Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Why it applies: cutoff_grade and internal dilution are both stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
26MCDD027Mt Chalmers · goldGrade: 0.59Grade Unit: g/tIntercept: 3.3 mView all detailsHide details
Identity
- Hole ID
- 26MCDD027
- Project
- Mt Chalmers
- Commodity
- gold
- Region
- australia_qld
- Reported Region
- australia_qld
- Ticker
- QML
Geometry
- Grade
- 0.59
- Grade Unit
- g/t
- Intercept
- 3.3 m
- From
- 42.7 m
- To
- 46 m
- Hole Depth
- 67.7 m
- Intercept Depth
- 42.7 m
Classification
- Deposit Type
- vms
- Program
- resource
- Sample Type
- drill
- Group ID
- 26MCDD027:42.7-46
- Mining Method
- open_pit
Location
- Easting
- 259897.9
- Northing
- 7421238
- Elevation
- 91.5 m
- Azimuth
- 0 °
- Dip
- -90 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Laboratories in Brisbane
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- Yes
Compositing
- Cutoff Grade
- 0.2
- Cutoff Unit
- % Cu
- Dilution Disclosed
- Yes
- Max Dilution
- 2 m
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-10-06T00:00:00.000Z
Reasoning: This is a moderate gold intercept from the first pontoon drilling, exceeding the block model and indicating significant mineralization beneath the pit.
Positive factors
- Moderate gold grade for VMS deposit type.
- Part of the first pontoon drilling program, indicating high novelty.
- Exceeds the existing resource block model.
Negative factors
- True width not known.
Evidence · table
“0.59”
Context: 3.3
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Compositing Transparentpositive
Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Why it applies: cutoff_grade and internal dilution are both stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
26MCDD027Mt Chalmers · silverGrade: 16Grade Unit: g/tIntercept: 3.3 mView all detailsHide details
Identity
- Hole ID
- 26MCDD027
- Project
- Mt Chalmers
- Commodity
- silver
- Region
- australia_qld
- Reported Region
- australia_qld
- Ticker
- QML
Geometry
- Grade
- 16
- Grade Unit
- g/t
- Intercept
- 3.3 m
- From
- 42.7 m
- To
- 46 m
- Hole Depth
- 67.7 m
- Intercept Depth
- 42.7 m
Classification
- Deposit Type
- vms
- Program
- resource
- Sample Type
- drill
- Group ID
- 26MCDD027:42.7-46
- Mining Method
- open_pit
Location
- Easting
- 259897.9
- Northing
- 7421238
- Elevation
- 91.5 m
- Azimuth
- 0 °
- Dip
- -90 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Laboratories in Brisbane
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- Yes
Compositing
- Cutoff Grade
- 0.2
- Cutoff Unit
- % Cu
- Dilution Disclosed
- Yes
- Max Dilution
- 2 m
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-10-06T00:00:00.000Z
Reasoning: This is a weak silver intercept from the first pontoon drilling, exceeding the block model and indicating significant mineralization beneath the pit.
Positive factors
- Part of the first pontoon drilling program, indicating high novelty.
- Exceeds the existing resource block model.
Negative factors
- True width not known.
- Weak silver grade for VMS deposit type.
Evidence · table
“16”
Context: 3.3
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Compositing Transparentpositive
Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Why it applies: cutoff_grade and internal dilution are both stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
26MCDD027Mt Chalmers · zincGrade: 0.5Grade Unit: %Intercept: 3.3 mView all detailsHide details
Identity
- Hole ID
- 26MCDD027
- Project
- Mt Chalmers
- Commodity
- zinc
- Region
- australia_qld
- Reported Region
- australia_qld
- Ticker
- QML
Geometry
- Grade
- 0.5
- Grade Unit
- %
- Intercept
- 3.3 m
- From
- 42.7 m
- To
- 46 m
- Hole Depth
- 67.7 m
- Intercept Depth
- 42.7 m
Classification
- Deposit Type
- vms
- Program
- resource
- Sample Type
- drill
- Group ID
- 26MCDD027:42.7-46
- Mining Method
- open_pit
Location
- Easting
- 259897.9
- Northing
- 7421238
- Elevation
- 91.5 m
- Azimuth
- 0 °
- Dip
- -90 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Laboratories in Brisbane
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- Yes
Compositing
- Cutoff Grade
- 0.2
- Cutoff Unit
- % Cu
- Dilution Disclosed
- Yes
- Max Dilution
- 2 m
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-10-06T00:00:00.000Z
Reasoning: This is a moderate zinc intercept from the first pontoon drilling, exceeding the block model and indicating significant mineralization beneath the pit.
Positive factors
- Moderate zinc grade for VMS deposit type.
- Part of the first pontoon drilling program, indicating high novelty.
- Exceeds the existing resource block model.
Negative factors
- True width not known.
Evidence · table
“0.50”
Context: 3.3
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Compositing Transparentpositive
Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Why it applies: cutoff_grade and internal dilution are both stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
26MCDD027Mt Chalmers · leadGrade: 0.06Grade Unit: %Intercept: 3.3 mView all detailsHide details
Identity
- Hole ID
- 26MCDD027
- Project
- Mt Chalmers
- Commodity
- lead
- Region
- australia_qld
- Reported Region
- australia_qld
- Ticker
- QML
Geometry
- Grade
- 0.06
- Grade Unit
- %
- Intercept
- 3.3 m
- From
- 42.7 m
- To
- 46 m
- Hole Depth
- 67.7 m
- Intercept Depth
- 42.7 m
Classification
- Deposit Type
- vms
- Program
- resource
- Sample Type
- drill
- Group ID
- 26MCDD027:42.7-46
- Mining Method
- open_pit
Location
- Easting
- 259897.9
- Northing
- 7421238
- Elevation
- 91.5 m
- Azimuth
- 0 °
- Dip
- -90 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Laboratories in Brisbane
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- Yes
Compositing
- Cutoff Grade
- 0.2
- Cutoff Unit
- % Cu
- Dilution Disclosed
- Yes
- Max Dilution
- 2 m
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-10-06T00:00:00.000Z
Reasoning: This is a weak lead intercept from the first pontoon drilling, exceeding the block model and indicating significant mineralization beneath the pit.
Positive factors
- Part of the first pontoon drilling program, indicating high novelty.
- Exceeds the existing resource block model.
Negative factors
- True width not known.
- Weak lead grade for VMS deposit type.
Evidence · table
“0.06”
Context: 3.3
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Compositing Transparentpositive
Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Why it applies: cutoff_grade and internal dilution are both stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
26MCDD027Mt Chalmers · copperGrade: 1.38Grade Unit: %Intercept: 10.3 mView all detailsHide details
Identity
- Hole ID
- 26MCDD027
- Project
- Mt Chalmers
- Commodity
- copper
- Region
- australia_qld
- Reported Region
- australia_qld
- Ticker
- QML
Geometry
- Grade
- 1.38
- Grade Unit
- %
- Intercept
- 10.3 m
- From
- 42.7 m
- To
- 53 m
- Hole Depth
- 67.7 m
- Intercept Depth
- 42.7 m
Classification
- Deposit Type
- vms
- Program
- resource
- Sample Type
- drill
- Group ID
- 26MCDD027:42.7-53
- Mining Method
- open_pit
Location
- Easting
- 259897.9
- Northing
- 7421238
- Elevation
- 91.5 m
- Azimuth
- 0 °
- Dip
- -90 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Laboratories in Brisbane
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- Yes
Compositing
- Cutoff Grade
- 0.2
- Cutoff Unit
- % Cu
- Dilution Disclosed
- Yes
- Max Dilution
- 2 m
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-10-06T00:00:00.000Z
Reasoning: This is a high-grade copper intercept from the first pontoon drilling, exceeding the block model and indicating significant mineralization beneath the pit.
Positive factors
- High-grade copper intercept for VMS deposit type.
- Part of the first pontoon drilling program, indicating high novelty.
- Exceeds the existing resource block model.
Negative factors
- True width not known.
Evidence · table
“1.38”
Context: 10.3
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Compositing Transparentpositive
Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Why it applies: cutoff_grade and internal dilution are both stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
26MCDD027Mt Chalmers · goldGrade: 0.45Grade Unit: g/tIntercept: 10.3 mView all detailsHide details
Identity
- Hole ID
- 26MCDD027
- Project
- Mt Chalmers
- Commodity
- gold
- Region
- australia_qld
- Reported Region
- australia_qld
- Ticker
- QML
Geometry
- Grade
- 0.45
- Grade Unit
- g/t
- Intercept
- 10.3 m
- From
- 42.7 m
- To
- 53 m
- Hole Depth
- 67.7 m
- Intercept Depth
- 42.7 m
Classification
- Deposit Type
- vms
- Program
- resource
- Sample Type
- drill
- Group ID
- 26MCDD027:42.7-53
- Mining Method
- open_pit
Location
- Easting
- 259897.9
- Northing
- 7421238
- Elevation
- 91.5 m
- Azimuth
- 0 °
- Dip
- -90 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Laboratories in Brisbane
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- Yes
Compositing
- Cutoff Grade
- 0.2
- Cutoff Unit
- % Cu
- Dilution Disclosed
- Yes
- Max Dilution
- 2 m
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-10-06T00:00:00.000Z
Reasoning: This is a moderate gold intercept from the first pontoon drilling, exceeding the block model and indicating significant mineralization beneath the pit.
Positive factors
- Moderate gold grade for VMS deposit type.
- Part of the first pontoon drilling program, indicating high novelty.
- Exceeds the existing resource block model.
Negative factors
- True width not known.
Evidence · table
“0.45”
Context: 10.3
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Compositing Transparentpositive
Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Why it applies: cutoff_grade and internal dilution are both stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
26MCDD027Mt Chalmers · silverGrade: 11Grade Unit: g/tIntercept: 10.3 mView all detailsHide details
Identity
- Hole ID
- 26MCDD027
- Project
- Mt Chalmers
- Commodity
- silver
- Region
- australia_qld
- Reported Region
- australia_qld
- Ticker
- QML
Geometry
- Grade
- 11
- Grade Unit
- g/t
- Intercept
- 10.3 m
- From
- 42.7 m
- To
- 53 m
- Hole Depth
- 67.7 m
- Intercept Depth
- 42.7 m
Classification
- Deposit Type
- vms
- Program
- resource
- Sample Type
- drill
- Group ID
- 26MCDD027:42.7-53
- Mining Method
- open_pit
Location
- Easting
- 259897.9
- Northing
- 7421238
- Elevation
- 91.5 m
- Azimuth
- 0 °
- Dip
- -90 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Laboratories in Brisbane
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- Yes
Compositing
- Cutoff Grade
- 0.2
- Cutoff Unit
- % Cu
- Dilution Disclosed
- Yes
- Max Dilution
- 2 m
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-10-06T00:00:00.000Z
Reasoning: This is a weak silver intercept from the first pontoon drilling, exceeding the block model and indicating significant mineralization beneath the pit.
Positive factors
- Part of the first pontoon drilling program, indicating high novelty.
- Exceeds the existing resource block model.
Negative factors
- True width not known.
- Weak silver grade for VMS deposit type.
Evidence · table
“11”
Context: 10.3
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Compositing Transparentpositive
Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Why it applies: cutoff_grade and internal dilution are both stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
26MCDD027Mt Chalmers · zincGrade: 0.38Grade Unit: %Intercept: 10.3 mView all detailsHide details
Identity
- Hole ID
- 26MCDD027
- Project
- Mt Chalmers
- Commodity
- zinc
- Region
- australia_qld
- Reported Region
- australia_qld
- Ticker
- QML
Geometry
- Grade
- 0.38
- Grade Unit
- %
- Intercept
- 10.3 m
- From
- 42.7 m
- To
- 53 m
- Hole Depth
- 67.7 m
- Intercept Depth
- 42.7 m
Classification
- Deposit Type
- vms
- Program
- resource
- Sample Type
- drill
- Group ID
- 26MCDD027:42.7-53
- Mining Method
- open_pit
Location
- Easting
- 259897.9
- Northing
- 7421238
- Elevation
- 91.5 m
- Azimuth
- 0 °
- Dip
- -90 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Laboratories in Brisbane
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- Yes
Compositing
- Cutoff Grade
- 0.2
- Cutoff Unit
- % Cu
- Dilution Disclosed
- Yes
- Max Dilution
- 2 m
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-10-06T00:00:00.000Z
Reasoning: This is a moderate zinc intercept from the first pontoon drilling, exceeding the block model and indicating significant mineralization beneath the pit.
Positive factors
- Moderate zinc grade for VMS deposit type.
- Part of the first pontoon drilling program, indicating high novelty.
- Exceeds the existing resource block model.
Negative factors
- True width not known.
Evidence · table
“0.38”
Context: 10.3
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Compositing Transparentpositive
Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Why it applies: cutoff_grade and internal dilution are both stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
26MCDD027Mt Chalmers · leadGrade: 0.06Grade Unit: %Intercept: 10.3 mView all detailsHide details
Identity
- Hole ID
- 26MCDD027
- Project
- Mt Chalmers
- Commodity
- lead
- Region
- australia_qld
- Reported Region
- australia_qld
- Ticker
- QML
Geometry
- Grade
- 0.06
- Grade Unit
- %
- Intercept
- 10.3 m
- From
- 42.7 m
- To
- 53 m
- Hole Depth
- 67.7 m
- Intercept Depth
- 42.7 m
Classification
- Deposit Type
- vms
- Program
- resource
- Sample Type
- drill
- Group ID
- 26MCDD027:42.7-53
- Mining Method
- open_pit
Location
- Easting
- 259897.9
- Northing
- 7421238
- Elevation
- 91.5 m
- Azimuth
- 0 °
- Dip
- -90 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Laboratories in Brisbane
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- Yes
Compositing
- Cutoff Grade
- 0.2
- Cutoff Unit
- % Cu
- Dilution Disclosed
- Yes
- Max Dilution
- 2 m
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-10-06T00:00:00.000Z
Reasoning: This is a weak lead intercept from the first pontoon drilling, exceeding the block model and indicating significant mineralization beneath the pit.
Positive factors
- Part of the first pontoon drilling program, indicating high novelty.
- Exceeds the existing resource block model.
Negative factors
- True width not known.
- Weak lead grade for VMS deposit type.
Evidence · table
“0.06”
Context: 10.3
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Compositing Transparentpositive
Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Why it applies: cutoff_grade and internal dilution are both stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
2026_GT03Mt Chalmers · copperGrade: 0.1Grade Unit: %Intercept: 3 mHistorical resultNeeds review: historical_restatementView all detailsHide details
Identity
- Hole ID
- 2026_GT03
- Project
- Mt Chalmers
- Commodity
- copper
- Region
- australia_qld
- Reported Region
- australia_qld
- Ticker
- QML
Geometry
- Grade
- 0.1
- Grade Unit
- %
- Intercept
- 3 m
- From
- 48 m
- To
- 51 m
- Hole Depth
- 75.5 m
- Intercept Depth
- 48 m
Classification
- Deposit Type
- vms
- Program
- resource
- Sample Type
- drill
- Group ID
- 2026_GT03:48-51
- Mining Method
- open_pit
Location
- Easting
- 259846
- Northing
- 7421069
- Elevation
- 106.3 m
- Azimuth
- 175 °
- Dip
- -85 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Laboratories in Brisbane
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- Yes
Compositing
- Cutoff Grade
- 0.2
- Cutoff Unit
- % Cu
- Dilution Disclosed
- Yes
- Max Dilution
- 2 m
Review
- Needs Review
- Yes
- Review Reason
- historical_restatement
- Interp. Status
- scored
- Historical
- Yes
- Historical Source Date
- 2024-04-30T00:00:00.000Z
Dates
- Event date
- 2026-10-06T00:00:00.000Z
Reasoning: This is a previously reported weak copper intercept, providing historical context but not new information.
Negative factors
- Weak copper grade for VMS deposit type.
- True width not known.
Evidence · table
“0.10”
Context: 3.0
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Compositing Transparentpositive
Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Why it applies: cutoff_grade and internal dilution are both stated
Stale Data Re-releasenegative
Historical results re-announced with no new assays or reinterpretation — low genuine novelty.
Why it applies: the fact restates a prior release
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
2026_GT03Mt Chalmers · goldGrade: 0.3Grade Unit: g/tIntercept: 3 mHistorical resultNeeds review: historical_restatementView all detailsHide details
Identity
- Hole ID
- 2026_GT03
- Project
- Mt Chalmers
- Commodity
- gold
- Region
- australia_qld
- Reported Region
- australia_qld
- Ticker
- QML
Geometry
- Grade
- 0.3
- Grade Unit
- g/t
- Intercept
- 3 m
- From
- 48 m
- To
- 51 m
- Hole Depth
- 75.5 m
- Intercept Depth
- 48 m
Classification
- Deposit Type
- vms
- Program
- resource
- Sample Type
- drill
- Group ID
- 2026_GT03:48-51
- Mining Method
- open_pit
Location
- Easting
- 259846
- Northing
- 7421069
- Elevation
- 106.3 m
- Azimuth
- 175 °
- Dip
- -85 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Laboratories in Brisbane
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- Yes
Compositing
- Cutoff Grade
- 0.2
- Cutoff Unit
- % Cu
- Dilution Disclosed
- Yes
- Max Dilution
- 2 m
Review
- Needs Review
- Yes
- Review Reason
- historical_restatement
- Interp. Status
- scored
- Historical
- Yes
- Historical Source Date
- 2024-04-30T00:00:00.000Z
Dates
- Event date
- 2026-10-06T00:00:00.000Z
Reasoning: This is a previously reported weak gold intercept, providing historical context but not new information.
Negative factors
- Weak gold grade for VMS deposit type.
- True width not known.
Evidence · table
“0.30”
Context: 3.0
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Compositing Transparentpositive
Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Why it applies: cutoff_grade and internal dilution are both stated
Stale Data Re-releasenegative
Historical results re-announced with no new assays or reinterpretation — low genuine novelty.
Why it applies: the fact restates a prior release
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
2026_GT03Mt Chalmers · zincGrade: 1.9Grade Unit: %Intercept: 3 mHistorical resultNeeds review: historical_restatementView all detailsHide details
Identity
- Hole ID
- 2026_GT03
- Project
- Mt Chalmers
- Commodity
- zinc
- Region
- australia_qld
- Reported Region
- australia_qld
- Ticker
- QML
Geometry
- Grade
- 1.9
- Grade Unit
- %
- Intercept
- 3 m
- From
- 48 m
- To
- 51 m
- Hole Depth
- 75.5 m
- Intercept Depth
- 48 m
Classification
- Deposit Type
- vms
- Program
- resource
- Sample Type
- drill
- Group ID
- 2026_GT03:48-51
- Mining Method
- open_pit
Location
- Easting
- 259846
- Northing
- 7421069
- Elevation
- 106.3 m
- Azimuth
- 175 °
- Dip
- -85 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Laboratories in Brisbane
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- Yes
Compositing
- Cutoff Grade
- 0.2
- Cutoff Unit
- % Cu
- Dilution Disclosed
- Yes
- Max Dilution
- 2 m
Review
- Needs Review
- Yes
- Review Reason
- historical_restatement
- Interp. Status
- scored
- Historical
- Yes
- Historical Source Date
- 2024-04-30T00:00:00.000Z
Dates
- Event date
- 2026-10-06T00:00:00.000Z
Reasoning: This is a previously reported good zinc intercept, providing historical context but not new information.
Negative factors
- True width not known.
Evidence · table
“1.90”
Context: 3.0
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Compositing Transparentpositive
Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Why it applies: cutoff_grade and internal dilution are both stated
Stale Data Re-releasenegative
Historical results re-announced with no new assays or reinterpretation — low genuine novelty.
Why it applies: the fact restates a prior release
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
2026_GT03Mt Chalmers · leadGrade: 0.8Grade Unit: %Intercept: 3 mHistorical resultNeeds review: historical_restatementView all detailsHide details
Identity
- Hole ID
- 2026_GT03
- Project
- Mt Chalmers
- Commodity
- lead
- Region
- australia_qld
- Reported Region
- australia_qld
- Ticker
- QML
Geometry
- Grade
- 0.8
- Grade Unit
- %
- Intercept
- 3 m
- From
- 48 m
- To
- 51 m
- Hole Depth
- 75.5 m
- Intercept Depth
- 48 m
Classification
- Deposit Type
- vms
- Program
- resource
- Sample Type
- drill
- Group ID
- 2026_GT03:48-51
- Mining Method
- open_pit
Location
- Easting
- 259846
- Northing
- 7421069
- Elevation
- 106.3 m
- Azimuth
- 175 °
- Dip
- -85 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Laboratories in Brisbane
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- Yes
Compositing
- Cutoff Grade
- 0.2
- Cutoff Unit
- % Cu
- Dilution Disclosed
- Yes
- Max Dilution
- 2 m
Review
- Needs Review
- Yes
- Review Reason
- historical_restatement
- Interp. Status
- scored
- Historical
- Yes
- Historical Source Date
- 2024-04-30T00:00:00.000Z
Dates
- Event date
- 2026-10-06T00:00:00.000Z
Reasoning: This is a previously reported good lead intercept, providing historical context but not new information.
Negative factors
- True width not known.
Evidence · table
“0.80”
Context: 3.0
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Compositing Transparentpositive
Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Why it applies: cutoff_grade and internal dilution are both stated
Stale Data Re-releasenegative
Historical results re-announced with no new assays or reinterpretation — low genuine novelty.
Why it applies: the fact restates a prior release
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
2026_GT03Mt Chalmers · silverGrade: 16Grade Unit: g/tIntercept: 3 mHistorical resultNeeds review: historical_restatementView all detailsHide details
Identity
- Hole ID
- 2026_GT03
- Project
- Mt Chalmers
- Commodity
- silver
- Region
- australia_qld
- Reported Region
- australia_qld
- Ticker
- QML
Geometry
- Grade
- 16
- Grade Unit
- g/t
- Intercept
- 3 m
- From
- 48 m
- To
- 51 m
- Hole Depth
- 75.5 m
- Intercept Depth
- 48 m
Classification
- Deposit Type
- vms
- Program
- resource
- Sample Type
- drill
- Group ID
- 2026_GT03:48-51
- Mining Method
- open_pit
Location
- Easting
- 259846
- Northing
- 7421069
- Elevation
- 106.3 m
- Azimuth
- 175 °
- Dip
- -85 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Laboratories in Brisbane
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- Yes
Compositing
- Cutoff Grade
- 0.2
- Cutoff Unit
- % Cu
- Dilution Disclosed
- Yes
- Max Dilution
- 2 m
Review
- Needs Review
- Yes
- Review Reason
- historical_restatement
- Interp. Status
- scored
- Historical
- Yes
- Historical Source Date
- 2024-04-30T00:00:00.000Z
Dates
- Event date
- 2026-10-06T00:00:00.000Z
Reasoning: This is a previously reported good silver intercept, providing historical context but not new information.
Negative factors
- True width not known.
Evidence · table
“16”
Context: 3.0
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Compositing Transparentpositive
Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Why it applies: cutoff_grade and internal dilution are both stated
Stale Data Re-releasenegative
Historical results re-announced with no new assays or reinterpretation — low genuine novelty.
Why it applies: the fact restates a prior release
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
26MCRD002Mt Chalmers · copperGrade: 0.43Grade Unit: %Intercept: 1 mHistorical resultNeeds review: historical_restatementView all detailsHide details
Identity
- Hole ID
- 26MCRD002
- Project
- Mt Chalmers
- Commodity
- copper
- Region
- australia_qld
- Reported Region
- australia_qld
- Ticker
- QML
Geometry
- Grade
- 0.43
- Grade Unit
- %
- Intercept
- 1 m
- From
- 90 m
- To
- 91 m
- Hole Depth
- 211.5 m
- Intercept Depth
- 90 m
Classification
- Deposit Type
- vms
- Program
- resource
- Sample Type
- drill
- Group ID
- 26MCRD002:90-91
- Mining Method
- open_pit
Location
- Easting
- 260013
- Northing
- 7421420
- Elevation
- 125.3 m
- Azimuth
- 240 °
- Dip
- -75.1 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Laboratories in Brisbane
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- Yes
Compositing
- Cutoff Grade
- 0.2
- Cutoff Unit
- % Cu
- Dilution Disclosed
- Yes
- Max Dilution
- 2 m
Review
- Needs Review
- Yes
- Review Reason
- historical_restatement
- Interp. Status
- scored
- Historical
- Yes
- Historical Source Date
- 2024-04-30T00:00:00.000Z
Dates
- Event date
- 2026-10-06T00:00:00.000Z
Reasoning: This is a previously reported weak copper intercept, providing historical context but not new information.
Negative factors
- Weak copper grade for VMS deposit type.
- True width not known.
Evidence · table
“0.43”
Context: 1.0
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Compositing Transparentpositive
Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Why it applies: cutoff_grade and internal dilution are both stated
Stale Data Re-releasenegative
Historical results re-announced with no new assays or reinterpretation — low genuine novelty.
Why it applies: the fact restates a prior release
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
26MCRD002Mt Chalmers · goldGrade: 0.21Grade Unit: g/tIntercept: 1 mHistorical resultNeeds review: historical_restatementView all detailsHide details
Identity
- Hole ID
- 26MCRD002
- Project
- Mt Chalmers
- Commodity
- gold
- Region
- australia_qld
- Reported Region
- australia_qld
- Ticker
- QML
Geometry
- Grade
- 0.21
- Grade Unit
- g/t
- Intercept
- 1 m
- From
- 90 m
- To
- 91 m
- Hole Depth
- 211.5 m
- Intercept Depth
- 90 m
Classification
- Deposit Type
- vms
- Program
- resource
- Sample Type
- drill
- Group ID
- 26MCRD002:90-91
- Mining Method
- open_pit
Location
- Easting
- 260013
- Northing
- 7421420
- Elevation
- 125.3 m
- Azimuth
- 240 °
- Dip
- -75.1 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Laboratories in Brisbane
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- Yes
Compositing
- Cutoff Grade
- 0.2
- Cutoff Unit
- % Cu
- Dilution Disclosed
- Yes
- Max Dilution
- 2 m
Review
- Needs Review
- Yes
- Review Reason
- historical_restatement
- Interp. Status
- scored
- Historical
- Yes
- Historical Source Date
- 2024-04-30T00:00:00.000Z
Dates
- Event date
- 2026-10-06T00:00:00.000Z
Reasoning: This is a previously reported weak gold intercept, providing historical context but not new information.
Negative factors
- Weak gold grade for VMS deposit type.
- True width not known.
Evidence · table
“0.21”
Context: 1.0
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Compositing Transparentpositive
Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Why it applies: cutoff_grade and internal dilution are both stated
Stale Data Re-releasenegative
Historical results re-announced with no new assays or reinterpretation — low genuine novelty.
Why it applies: the fact restates a prior release
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
26MCRD002Mt Chalmers · zincGrade: 1.28Grade Unit: %Intercept: 1 mHistorical resultNeeds review: historical_restatementView all detailsHide details
Identity
- Hole ID
- 26MCRD002
- Project
- Mt Chalmers
- Commodity
- zinc
- Region
- australia_qld
- Reported Region
- australia_qld
- Ticker
- QML
Geometry
- Grade
- 1.28
- Grade Unit
- %
- Intercept
- 1 m
- From
- 90 m
- To
- 91 m
- Hole Depth
- 211.5 m
- Intercept Depth
- 90 m
Classification
- Deposit Type
- vms
- Program
- resource
- Sample Type
- drill
- Group ID
- 26MCRD002:90-91
- Mining Method
- open_pit
Location
- Easting
- 260013
- Northing
- 7421420
- Elevation
- 125.3 m
- Azimuth
- 240 °
- Dip
- -75.1 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Laboratories in Brisbane
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- Yes
Compositing
- Cutoff Grade
- 0.2
- Cutoff Unit
- % Cu
- Dilution Disclosed
- Yes
- Max Dilution
- 2 m
Review
- Needs Review
- Yes
- Review Reason
- historical_restatement
- Interp. Status
- scored
- Historical
- Yes
- Historical Source Date
- 2024-04-30T00:00:00.000Z
Dates
- Event date
- 2026-10-06T00:00:00.000Z
Reasoning: This is a previously reported good zinc intercept, providing historical context but not new information.
Negative factors
- True width not known.
Evidence · table
“1.28”
Context: 1.0
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Compositing Transparentpositive
Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Why it applies: cutoff_grade and internal dilution are both stated
Stale Data Re-releasenegative
Historical results re-announced with no new assays or reinterpretation — low genuine novelty.
Why it applies: the fact restates a prior release
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
26MCRD002Mt Chalmers · silverGrade: 7.3Grade Unit: g/tIntercept: 1 mHistorical resultNeeds review: historical_restatementView all detailsHide details
Identity
- Hole ID
- 26MCRD002
- Project
- Mt Chalmers
- Commodity
- silver
- Region
- australia_qld
- Reported Region
- australia_qld
- Ticker
- QML
Geometry
- Grade
- 7.3
- Grade Unit
- g/t
- Intercept
- 1 m
- From
- 90 m
- To
- 91 m
- Hole Depth
- 211.5 m
- Intercept Depth
- 90 m
Classification
- Deposit Type
- vms
- Program
- resource
- Sample Type
- drill
- Group ID
- 26MCRD002:90-91
- Mining Method
- open_pit
Location
- Easting
- 260013
- Northing
- 7421420
- Elevation
- 125.3 m
- Azimuth
- 240 °
- Dip
- -75.1 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Laboratories in Brisbane
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- Yes
Compositing
- Cutoff Grade
- 0.2
- Cutoff Unit
- % Cu
- Dilution Disclosed
- Yes
- Max Dilution
- 2 m
Review
- Needs Review
- Yes
- Review Reason
- historical_restatement
- Interp. Status
- scored
- Historical
- Yes
- Historical Source Date
- 2024-04-30T00:00:00.000Z
Dates
- Event date
- 2026-10-06T00:00:00.000Z
Reasoning: This is a previously reported weak silver intercept, providing historical context but not new information.
Negative factors
- Weak silver grade for VMS deposit type.
- True width not known.
Evidence · table
“7.3”
Context: 1.0
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Compositing Transparentpositive
Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Why it applies: cutoff_grade and internal dilution are both stated
Stale Data Re-releasenegative
Historical results re-announced with no new assays or reinterpretation — low genuine novelty.
Why it applies: the fact restates a prior release
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
26MCRD002Mt Chalmers · copperGrade: 2.88Grade Unit: %Intercept: 35 mHistorical resultNeeds review: historical_restatementView all detailsHide details
Identity
- Hole ID
- 26MCRD002
- Project
- Mt Chalmers
- Commodity
- copper
- Region
- australia_qld
- Reported Region
- australia_qld
- Ticker
- QML
Geometry
- Grade
- 2.88
- Grade Unit
- %
- Intercept
- 35 m
- From
- 107 m
- To
- 142 m
- Hole Depth
- 211.5 m
- Intercept Depth
- 90 m
Classification
- Deposit Type
- vms
- Program
- resource
- Sample Type
- drill
- Group ID
- 26MCRD002:107-142
- Mining Method
- open_pit
Location
- Easting
- 260013
- Northing
- 7421420
- Elevation
- 125.3 m
- Azimuth
- 240 °
- Dip
- -75.1 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Laboratories in Brisbane
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- Yes
Compositing
- Cutoff Grade
- 0.2
- Cutoff Unit
- % Cu
- Dilution Disclosed
- Yes
- Max Dilution
- 2 m
Review
- Needs Review
- Yes
- Review Reason
- historical_restatement
- Interp. Status
- scored
- Historical
- Yes
- Historical Source Date
- 2024-04-30T00:00:00.000Z
Dates
- Event date
- 2026-10-06T00:00:00.000Z
Reasoning: This is a previously reported exceptional copper intercept over a significant width, providing historical context but not new information.
Positive factors
- Exceptional copper grade over a significant width for VMS deposit type.
Negative factors
- True width not known.
Evidence · table
“2.88”
Context: 35
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Compositing Transparentpositive
Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Why it applies: cutoff_grade and internal dilution are both stated
Stale Data Re-releasenegative
Historical results re-announced with no new assays or reinterpretation — low genuine novelty.
Why it applies: the fact restates a prior release
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
26MCRD002Mt Chalmers · goldGrade: 0.75Grade Unit: g/tIntercept: 35 mHistorical resultNeeds review: historical_restatementView all detailsHide details
Identity
- Hole ID
- 26MCRD002
- Project
- Mt Chalmers
- Commodity
- gold
- Region
- australia_qld
- Reported Region
- australia_qld
- Ticker
- QML
Geometry
- Grade
- 0.75
- Grade Unit
- g/t
- Intercept
- 35 m
- From
- 107 m
- To
- 142 m
- Hole Depth
- 211.5 m
- Intercept Depth
- 90 m
Classification
- Deposit Type
- vms
- Program
- resource
- Sample Type
- drill
- Group ID
- 26MCRD002:107-142
- Mining Method
- open_pit
Location
- Easting
- 260013
- Northing
- 7421420
- Elevation
- 125.3 m
- Azimuth
- 240 °
- Dip
- -75.1 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Laboratories in Brisbane
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- Yes
Compositing
- Cutoff Grade
- 0.2
- Cutoff Unit
- % Cu
- Dilution Disclosed
- Yes
- Max Dilution
- 2 m
Review
- Needs Review
- Yes
- Review Reason
- historical_restatement
- Interp. Status
- scored
- Historical
- Yes
- Historical Source Date
- 2024-04-30T00:00:00.000Z
Dates
- Event date
- 2026-10-06T00:00:00.000Z
Reasoning: This is a previously reported moderate gold intercept over a significant width, providing historical context but not new information.
Positive factors
- Moderate gold grade over a significant width for VMS deposit type.
Negative factors
- True width not known.
Evidence · table
“0.75”
Context: 35
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Compositing Transparentpositive
Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Why it applies: cutoff_grade and internal dilution are both stated
Stale Data Re-releasenegative
Historical results re-announced with no new assays or reinterpretation — low genuine novelty.
Why it applies: the fact restates a prior release
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
How Atlas produces this analysis
Minestarters Atlas uses automated extraction to summarize mining announcements, identify reported measurements, and classify supporting evidence. Sentiment reflects the extracted narrative and classification rules; it is an interpretation, not a reported measurement. Evidence quotes and context are provided where available. Missing data, low-confidence results, and review flags indicate limitations. Check the original publisher announcement before relying on an interpretation.