# QML: Copper Discovery at Mt Chalmers

Canonical Atlas analysis: https://atlas-staging.minestarters.com/news/qml-copper-discovery-at-mt-chalmers--fe382ad6-14fe-48fd-abdf-bcef62bdf4fa

Original source: https://www.asx.com.au/asx/v2/statistics/displayAnnouncement.do?display=pdf&idsId=03151012

Publisher: asx

Original announcement: 2026-10-11T22:18:00.000Z

Analysis by Minestarters Atlas

Atlas analysis published: 2026-10-11T23:26:36.603Z

Atlas analysis updated: 2026-10-11T23:26:36.603Z

- Company: QMines Limited

- Ticker: QML

- Exchange: ASX

- Region: Queensland

- Primary commodity: Copper

- Secondary commodities: Gold, Zinc, Lead, Silver, Sulfur

- Document categories: Other, Drill results, Resource update

- Extracted: 2026-10-11 23:26:37 UTC

Narrative sentiment: 0.30 · Bullish

## Minestarters Atlas summary

QMines Limited has announced a new copper sulphide discovery in drillhole 26MCDD052 at its Mt Chalmers project, located 180m beyond the existing resource. The hole intersected 11m of visually identified chalcopyrite-pyrite mineralisation, suggesting potential for significant resource growth and additional massive sulphide lenses. However, the company cautions that these are visual estimates, and metal grades, true width, and continuity remain unknown pending laboratory assays expected in late October 2026.

Reasoning: QMines Limited has announced a new visual discovery of copper sulphides 180m beyond the existing Mt Chalmers resource, indicating significant exploration potential. However, the lack of assay results and true width information means the economic significance is currently unknown, and assays are pending.

- Positive factor: New visual discovery of copper sulphides 180m beyond existing resource

- Positive factor: Indicates potential for significant resource growth and additional massive sulphide lenses

- Positive factor: Strategic land acquisitions enabled access to new exploration area

- Positive factor: Discovery supports further exploration of interpreted 4km corridor

- Negative factor: Discovery is based on visual estimates only, no assays or grades available

- Negative factor: True width of mineralisation is unknown

- Negative factor: Continuity of mineralisation not yet established

- Negative factor: Economic significance of the visual intercept is unknown pending assays

Low confidence — this extraction should be reviewed alongside the original source.

Facts used in scoring: 57

## Classification and evidence

No classification tags are available.

## Extracted facts

Stored fact records: 57. Some facts used in scoring do not have a stored record.

## Drill Results (57)

### 26MCDD052

[Link to this fact](https://atlas-staging.minestarters.com/news/qml-copper-discovery-at-mt-chalmers--fe382ad6-14fe-48fd-abdf-bcef62bdf4fa#fact-drill-facts-0)

Mt Chalmers West · copper

#### Identity

- Hole ID: 26MCDD052
- Project: Mt Chalmers West
- Commodity: copper
- Region: australia\_qld
- Reported Region: australia\_qld
- Ticker: QML

#### Geometry

- Intercept: 11 m
- From: 192.15 m
- To: 203 m
- Hole Depth: 255.5 m
- Intercept Depth: 192.15 m

#### Classification

- Deposit Type: vms
- Program: exploration
- Sample Type: drill
- Group ID: 26MCDD052:192.15-203
- Mining Method: unknown

#### Location

- Easting: 260219.998
- Northing: 7421837.418
- CRS: UTM
- Elevation: 100.235 m
- Azimuth: 59.25 °
- Dip: -60.81 °
- Loc. Confidence: medium
- Loc. Source: document

#### QA/QC

- QA/QC Disclosed: Yes
- QP Signed: Yes

#### Deleterious

- Deleterious Flag: No

#### Compositing

- Dilution Disclosed: Yes

#### Review

- Needs Review: No
- Interp. Status: scored
- Historical: No

#### Dates

- Event date: 2026-10-11T00:00:00.000Z

Reasoning: A new visual discovery of 11m of copper sulphides in hole 26MCDD052, 180m beyond the existing resource, is a positive exploration signal, but the lack of assay results and true width information limits confidence in its economic potential.

- Positive factor: New visual discovery extends mineralisation beyond current resource

- Positive factor: Indicates potential for significant resource growth

- Positive factor: Opens new exploration target in previously untested ground

- Negative factor: Visual estimates only, no assays or grades available

- Negative factor: True width unknown

- Negative factor: Continuity not established

- Negative factor: Economic significance unknown

Evidence · text

> Drillhole 26MCDD052 intersects 11m of visually identified copper sulphides

#### Tags used in scoring

**QA/QC Disclosed**

Polarity: positive

Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\).

Why it applies: qaqc\_disclosed is true

**Cut-off Undisclosed**

Polarity: negative

Definition: High-grade interval reported without stating the cut-off grade used for compositing.

Why it applies: no cutoff\_grade was stated

**Nearology Play**

Polarity: neutral

Definition: Value premise rests on proximity to a known deposit rather than own results.

Why it applies: proximity is offered as the value premise: "1 A N N O U N C E M E N T QMINES DISCOVERS COPPER SULPHIDES 180M BEYOND MT CHALMERS RESOURCE HIGHLIGHTS • New Copper Dis"

#### Rejected tags

**Apparent Width Only** — Rejected; excluded from scoring

Polarity: negative

Definition: Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.

Reason: The document explicitly states that all reported lengths are downhole and true widths are unknown.

Evidence · text

> All reported lengths are downhole; true widths are unknown.

**Visual Estimate Only** — Rejected; excluded from scoring

Polarity: negative

Story-specific tag

Definition: No canonical definition is currently available.

Reason: The discovery is based on visually identified copper sulphides, with no laboratory assays reported.

Evidence · text

> Drillhole 26MCDD052 intersects 11m of visually identified copper sulphides

**Step-Out Extension** — Rejected; excluded from scoring

Polarity: positive

Definition: Mineralization extended beyond the previously known limit.

Reason: The discovery is located 180m beyond the existing Mt Chalmers Resource, indicating an extension of potential mineralisation.

Evidence · text

> New Copper Discovery 180m Beyond Resource

### 2026\_GT03

[Link to this fact](https://atlas-staging.minestarters.com/news/qml-copper-discovery-at-mt-chalmers--fe382ad6-14fe-48fd-abdf-bcef62bdf4fa#fact-drill-facts-1)

Mt Chalmers West · copper

Historical result

Needs review: historical\_restatement

#### Identity

- Hole ID: 2026\_GT03
- Project: Mt Chalmers West
- Commodity: copper
- Region: australia\_qld
- Reported Region: australia\_qld
- Ticker: QML

#### Geometry

- Grade: 0.1
- Grade Unit: %
- Intercept: 3 m
- From: 48 m
- To: 51 m
- Hole Depth: 75.5 m
- Intercept Depth: 48 m

#### Classification

- Deposit Type: vms
- Program: exploration
- Sample Type: drill
- Group ID: 2026\_GT03:48-51
- Mining Method: unknown

#### Location

- Easting: 259846
- Northing: 7421069
- CRS: UTM
- Elevation: 106.3 m
- Azimuth: 175 °
- Dip: -85 °
- Loc. Confidence: high
- Loc. Source: document

#### QA/QC

- Laboratory: ALS Brisbane
- QA/QC Disclosed: Yes
- QP Signed: Yes

#### Deleterious

- Deleterious Flag: No

#### Compositing

- Cutoff Grade: 0.2
- Cutoff Unit: % Cu
- Dilution Disclosed: Yes
- Max Dilution: 2 m

#### Review

- Needs Review: Yes
- Review Reason: historical\_restatement
- Interp. Status: scored
- Historical: Yes

#### Dates

- Event date: 2026-10-11T00:00:00.000Z

Reasoning: This previously reported copper intercept is below the stated cutoff grade for the table, indicating low economic significance, and has low novelty.

- Positive factor: QA/QC procedures disclosed

- Positive factor: Compositing parameters transparent

- Negative factor: Grade is below the table's stated cutoff of 0.20% Cu

- Negative factor: Result is previously reported, low novelty

Evidence · table

> 0.10

Context: 3.0

#### Tags used in scoring

**Nearology Play**

Polarity: neutral

Definition: Value premise rests on proximity to a known deposit rather than own results.

Why it applies: proximity is offered as the value premise: "1 A N N O U N C E M E N T QMINES DISCOVERS COPPER SULPHIDES 180M BEYOND MT CHALMERS RESOURCE HIGHLIGHTS • New Copper Dis"

#### Rejected tags

**Stale Data Re-release** — Rejected; excluded from scoring

Polarity: negative

Definition: Historical results re-announced with no new assays or reinterpretation — low genuine novelty.

Reason: The intercept is explicitly marked as 'Previously reported' in the table.

Evidence · table

> Previously reported

Context: 2026\_GT03

**QA/QC Disclosed** — Rejected; excluded from scoring

Polarity: positive

Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\).

Reason: The JORC table details internal QA/QC review by QMines technical personnel and the Competent Person.

Evidence · text

> Drilling, logging, sampling, assay and QAQC data were internally reviewed by QMines technical personnel and the Competent Person.

**Compositing Transparent** — Rejected; excluded from scoring

Polarity: positive

Definition: Cut-off grade and internal dilution rules are clearly stated for reported intervals.

Reason: The table specifies a 0.20% Cu lower cut off and maximum 2m internal dilution for the reported intercepts.

Evidence · text

> 0.20% Cu lower cut off, maximum 2m internal dilution.

### 2026\_GT03

[Link to this fact](https://atlas-staging.minestarters.com/news/qml-copper-discovery-at-mt-chalmers--fe382ad6-14fe-48fd-abdf-bcef62bdf4fa#fact-drill-facts-2)

Mt Chalmers West · gold

Historical result

Needs review: historical\_restatement

#### Identity

- Hole ID: 2026\_GT03
- Project: Mt Chalmers West
- Commodity: gold
- Region: australia\_qld
- Reported Region: australia\_qld
- Ticker: QML

#### Geometry

- Grade: 0.3
- Grade Unit: g/t
- Intercept: 3 m
- From: 48 m
- To: 51 m
- Hole Depth: 75.5 m
- Intercept Depth: 48 m

#### Classification

- Deposit Type: vms
- Program: exploration
- Sample Type: drill
- Group ID: 2026\_GT03:48-51
- Mining Method: unknown

#### Location

- Easting: 259846
- Northing: 7421069
- CRS: UTM
- Elevation: 106.3 m
- Azimuth: 175 °
- Dip: -85 °
- Loc. Confidence: high
- Loc. Source: document

#### QA/QC

- Laboratory: ALS Brisbane
- QA/QC Disclosed: Yes
- QP Signed: Yes

#### Deleterious

- Deleterious Flag: No

#### Compositing

- Cutoff Grade: 0.2
- Cutoff Unit: % Cu
- Dilution Disclosed: Yes
- Max Dilution: 2 m

#### Review

- Needs Review: Yes
- Review Reason: historical\_restatement
- Interp. Status: scored
- Historical: Yes

#### Dates

- Event date: 2026-10-11T00:00:00.000Z

Reasoning: This previously reported gold intercept shows a weak grade over a narrow width, contributing little new information.

- Positive factor: QA/QC procedures disclosed

- Positive factor: Compositing parameters transparent

- Negative factor: Result is previously reported, low novelty

Evidence · table

> 0.30

Context: 3.0

#### Tags used in scoring

**Nearology Play**

Polarity: neutral

Definition: Value premise rests on proximity to a known deposit rather than own results.

Why it applies: proximity is offered as the value premise: "1 A N N O U N C E M E N T QMINES DISCOVERS COPPER SULPHIDES 180M BEYOND MT CHALMERS RESOURCE HIGHLIGHTS • New Copper Dis"

#### Rejected tags

**Stale Data Re-release** — Rejected; excluded from scoring

Polarity: negative

Definition: Historical results re-announced with no new assays or reinterpretation — low genuine novelty.

Reason: The intercept is explicitly marked as 'Previously reported' in the table.

Evidence · table

> Previously reported

Context: 2026\_GT03

**QA/QC Disclosed** — Rejected; excluded from scoring

Polarity: positive

Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\).

Reason: The JORC table details internal QA/QC review by QMines technical personnel and the Competent Person.

Evidence · text

> Drilling, logging, sampling, assay and QAQC data were internally reviewed by QMines technical personnel and the Competent Person.

**Compositing Transparent** — Rejected; excluded from scoring

Polarity: positive

Definition: Cut-off grade and internal dilution rules are clearly stated for reported intervals.

Reason: The table specifies a 0.20% Cu lower cut off and maximum 2m internal dilution for the reported intercepts.

Evidence · text

> 0.20% Cu lower cut off, maximum 2m internal dilution.

### 2026\_GT03

[Link to this fact](https://atlas-staging.minestarters.com/news/qml-copper-discovery-at-mt-chalmers--fe382ad6-14fe-48fd-abdf-bcef62bdf4fa#fact-drill-facts-3)

Mt Chalmers West · zinc

Historical result

Needs review: historical\_restatement

#### Identity

- Hole ID: 2026\_GT03
- Project: Mt Chalmers West
- Commodity: zinc
- Region: australia\_qld
- Reported Region: australia\_qld
- Ticker: QML

#### Geometry

- Grade: 1.9
- Grade Unit: %
- Intercept: 3 m
- From: 48 m
- To: 51 m
- Hole Depth: 75.5 m
- Intercept Depth: 48 m

#### Classification

- Deposit Type: vms
- Program: exploration
- Sample Type: drill
- Group ID: 2026\_GT03:48-51
- Mining Method: unknown

#### Location

- Easting: 259846
- Northing: 7421069
- CRS: UTM
- Elevation: 106.3 m
- Azimuth: 175 °
- Dip: -85 °
- Loc. Confidence: high
- Loc. Source: document

#### QA/QC

- Laboratory: ALS Brisbane
- QA/QC Disclosed: Yes
- QP Signed: Yes

#### Deleterious

- Deleterious Flag: No

#### Compositing

- Cutoff Grade: 0.2
- Cutoff Unit: % Cu
- Dilution Disclosed: Yes
- Max Dilution: 2 m

#### Review

- Needs Review: Yes
- Review Reason: historical\_restatement
- Interp. Status: scored
- Historical: Yes

#### Dates

- Event date: 2026-10-11T00:00:00.000Z

Reasoning: This previously reported zinc intercept shows a weak grade over a narrow width, contributing little new information.

- Positive factor: QA/QC procedures disclosed

- Positive factor: Compositing parameters transparent

- Negative factor: Result is previously reported, low novelty

Evidence · table

> 1.90

Context: 3.0

#### Tags used in scoring

**Nearology Play**

Polarity: neutral

Definition: Value premise rests on proximity to a known deposit rather than own results.

Why it applies: proximity is offered as the value premise: "1 A N N O U N C E M E N T QMINES DISCOVERS COPPER SULPHIDES 180M BEYOND MT CHALMERS RESOURCE HIGHLIGHTS • New Copper Dis"

#### Rejected tags

**Stale Data Re-release** — Rejected; excluded from scoring

Polarity: negative

Definition: Historical results re-announced with no new assays or reinterpretation — low genuine novelty.

Reason: The intercept is explicitly marked as 'Previously reported' in the table.

Evidence · table

> Previously reported

Context: 2026\_GT03

**QA/QC Disclosed** — Rejected; excluded from scoring

Polarity: positive

Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\).

Reason: The JORC table details internal QA/QC review by QMines technical personnel and the Competent Person.

Evidence · text

> Drilling, logging, sampling, assay and QAQC data were internally reviewed by QMines technical personnel and the Competent Person.

**Compositing Transparent** — Rejected; excluded from scoring

Polarity: positive

Definition: Cut-off grade and internal dilution rules are clearly stated for reported intervals.

Reason: The table specifies a 0.20% Cu lower cut off and maximum 2m internal dilution for the reported intercepts.

Evidence · text

> 0.20% Cu lower cut off, maximum 2m internal dilution.

### 2026\_GT03

[Link to this fact](https://atlas-staging.minestarters.com/news/qml-copper-discovery-at-mt-chalmers--fe382ad6-14fe-48fd-abdf-bcef62bdf4fa#fact-drill-facts-4)

Mt Chalmers West · lead

Historical result

Needs review: historical\_restatement

#### Identity

- Hole ID: 2026\_GT03
- Project: Mt Chalmers West
- Commodity: lead
- Region: australia\_qld
- Reported Region: australia\_qld
- Ticker: QML

#### Geometry

- Grade: 0.8
- Grade Unit: %
- Intercept: 3 m
- From: 48 m
- To: 51 m
- Hole Depth: 75.5 m
- Intercept Depth: 48 m

#### Classification

- Deposit Type: vms
- Program: exploration
- Sample Type: drill
- Group ID: 2026\_GT03:48-51
- Mining Method: unknown

#### Location

- Easting: 259846
- Northing: 7421069
- CRS: UTM
- Elevation: 106.3 m
- Azimuth: 175 °
- Dip: -85 °
- Loc. Confidence: high
- Loc. Source: document

#### QA/QC

- Laboratory: ALS Brisbane
- QA/QC Disclosed: Yes
- QP Signed: Yes

#### Deleterious

- Deleterious Flag: No

#### Compositing

- Cutoff Grade: 0.2
- Cutoff Unit: % Cu
- Dilution Disclosed: Yes
- Max Dilution: 2 m

#### Review

- Needs Review: Yes
- Review Reason: historical\_restatement
- Interp. Status: scored
- Historical: Yes

#### Dates

- Event date: 2026-10-11T00:00:00.000Z

Reasoning: This previously reported lead intercept shows a weak grade over a narrow width, contributing little new information.

- Positive factor: QA/QC procedures disclosed

- Positive factor: Compositing parameters transparent

- Negative factor: Result is previously reported, low novelty

Evidence · table

> 0.80

Context: 3.0

#### Tags used in scoring

**Nearology Play**

Polarity: neutral

Definition: Value premise rests on proximity to a known deposit rather than own results.

Why it applies: proximity is offered as the value premise: "1 A N N O U N C E M E N T QMINES DISCOVERS COPPER SULPHIDES 180M BEYOND MT CHALMERS RESOURCE HIGHLIGHTS • New Copper Dis"

#### Rejected tags

**Stale Data Re-release** — Rejected; excluded from scoring

Polarity: negative

Definition: Historical results re-announced with no new assays or reinterpretation — low genuine novelty.

Reason: The intercept is explicitly marked as 'Previously reported' in the table.

Evidence · table

> Previously reported

Context: 2026\_GT03

**QA/QC Disclosed** — Rejected; excluded from scoring

Polarity: positive

Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\).

Reason: The JORC table details internal QA/QC review by QMines technical personnel and the Competent Person.

Evidence · text

> Drilling, logging, sampling, assay and QAQC data were internally reviewed by QMines technical personnel and the Competent Person.

**Compositing Transparent** — Rejected; excluded from scoring

Polarity: positive

Definition: Cut-off grade and internal dilution rules are clearly stated for reported intervals.

Reason: The table specifies a 0.20% Cu lower cut off and maximum 2m internal dilution for the reported intercepts.

Evidence · text

> 0.20% Cu lower cut off, maximum 2m internal dilution.

### 2026\_GT03

[Link to this fact](https://atlas-staging.minestarters.com/news/qml-copper-discovery-at-mt-chalmers--fe382ad6-14fe-48fd-abdf-bcef62bdf4fa#fact-drill-facts-5)

Mt Chalmers West · silver

Historical result

Needs review: historical\_restatement

#### Identity

- Hole ID: 2026\_GT03
- Project: Mt Chalmers West
- Commodity: silver
- Region: australia\_qld
- Reported Region: australia\_qld
- Ticker: QML

#### Geometry

- Grade: 16
- Grade Unit: g/t
- Intercept: 3 m
- From: 48 m
- To: 51 m
- Hole Depth: 75.5 m
- Intercept Depth: 48 m

#### Classification

- Deposit Type: vms
- Program: exploration
- Sample Type: drill
- Group ID: 2026\_GT03:48-51
- Mining Method: unknown

#### Location

- Easting: 259846
- Northing: 7421069
- CRS: UTM
- Elevation: 106.3 m
- Azimuth: 175 °
- Dip: -85 °
- Loc. Confidence: high
- Loc. Source: document

#### QA/QC

- Laboratory: ALS Brisbane
- QA/QC Disclosed: Yes
- QP Signed: Yes

#### Deleterious

- Deleterious Flag: No

#### Compositing

- Cutoff Grade: 0.2
- Cutoff Unit: % Cu
- Dilution Disclosed: Yes
- Max Dilution: 2 m

#### Review

- Needs Review: Yes
- Review Reason: historical\_restatement
- Interp. Status: scored
- Historical: Yes

#### Dates

- Event date: 2026-10-11T00:00:00.000Z

Reasoning: This previously reported silver intercept shows a weak grade over a narrow width, contributing little new information.

- Positive factor: QA/QC procedures disclosed

- Positive factor: Compositing parameters transparent

- Negative factor: Result is previously reported, low novelty

Evidence · table

> 16

Context: 3.0

#### Tags used in scoring

**Nearology Play**

Polarity: neutral

Definition: Value premise rests on proximity to a known deposit rather than own results.

Why it applies: proximity is offered as the value premise: "1 A N N O U N C E M E N T QMINES DISCOVERS COPPER SULPHIDES 180M BEYOND MT CHALMERS RESOURCE HIGHLIGHTS • New Copper Dis"

#### Rejected tags

**Stale Data Re-release** — Rejected; excluded from scoring

Polarity: negative

Definition: Historical results re-announced with no new assays or reinterpretation — low genuine novelty.

Reason: The intercept is explicitly marked as 'Previously reported' in the table.

Evidence · table

> Previously reported

Context: 2026\_GT03

**QA/QC Disclosed** — Rejected; excluded from scoring

Polarity: positive

Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\).

Reason: The JORC table details internal QA/QC review by QMines technical personnel and the Competent Person.

Evidence · text

> Drilling, logging, sampling, assay and QAQC data were internally reviewed by QMines technical personnel and the Competent Person.

**Compositing Transparent** — Rejected; excluded from scoring

Polarity: positive

Definition: Cut-off grade and internal dilution rules are clearly stated for reported intervals.

Reason: The table specifies a 0.20% Cu lower cut off and maximum 2m internal dilution for the reported intercepts.

Evidence · text

> 0.20% Cu lower cut off, maximum 2m internal dilution.

### 26MCRD002

[Link to this fact](https://atlas-staging.minestarters.com/news/qml-copper-discovery-at-mt-chalmers--fe382ad6-14fe-48fd-abdf-bcef62bdf4fa#fact-drill-facts-6)

Mt Chalmers West · copper

Historical result

Needs review: historical\_restatement

#### Identity

- Hole ID: 26MCRD002
- Project: Mt Chalmers West
- Commodity: copper
- Region: australia\_qld
- Reported Region: australia\_qld
- Ticker: QML

#### Geometry

- Grade: 0.43
- Grade Unit: %
- Intercept: 1 m
- From: 90 m
- To: 91 m
- Hole Depth: 211.5 m
- Intercept Depth: 90 m

#### Classification

- Deposit Type: vms
- Program: exploration
- Sample Type: drill
- Group ID: 26MCRD002:90-91
- Mining Method: unknown

#### Location

- Easting: 260013
- Northing: 7421420
- CRS: UTM
- Elevation: 125.3 m
- Azimuth: 240 °
- Dip: -75.1 °
- Loc. Confidence: high
- Loc. Source: document

#### QA/QC

- Laboratory: ALS Brisbane
- QA/QC Disclosed: Yes
- QP Signed: Yes

#### Deleterious

- Deleterious Flag: No

#### Compositing

- Cutoff Grade: 0.2
- Cutoff Unit: % Cu
- Dilution Disclosed: Yes
- Max Dilution: 2 m

#### Review

- Needs Review: Yes
- Review Reason: historical\_restatement
- Interp. Status: scored
- Historical: Yes

#### Dates

- Event date: 2026-10-11T00:00:00.000Z

Reasoning: This previously reported copper intercept shows a weak grade over a narrow width, contributing little new information.

- Positive factor: QA/QC procedures disclosed

- Positive factor: Compositing parameters transparent

- Negative factor: Result is previously reported, low novelty

Evidence · table

> 0.43

Context: 1

#### Tags used in scoring

**Nearology Play**

Polarity: neutral

Definition: Value premise rests on proximity to a known deposit rather than own results.

Why it applies: proximity is offered as the value premise: "1 A N N O U N C E M E N T QMINES DISCOVERS COPPER SULPHIDES 180M BEYOND MT CHALMERS RESOURCE HIGHLIGHTS • New Copper Dis"

#### Rejected tags

**Stale Data Re-release** — Rejected; excluded from scoring

Polarity: negative

Definition: Historical results re-announced with no new assays or reinterpretation — low genuine novelty.

Reason: The intercept is explicitly marked as 'Previously reported' in the table.

Evidence · table

> Previously reported

Context: 26MCRD002

**QA/QC Disclosed** — Rejected; excluded from scoring

Polarity: positive

Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\).

Reason: The JORC table details internal QA/QC review by QMines technical personnel and the Competent Person.

Evidence · text

> Drilling, logging, sampling, assay and QAQC data were internally reviewed by QMines technical personnel and the Competent Person.

**Compositing Transparent** — Rejected; excluded from scoring

Polarity: positive

Definition: Cut-off grade and internal dilution rules are clearly stated for reported intervals.

Reason: The table specifies a 0.20% Cu lower cut off and maximum 2m internal dilution for the reported intercepts.

Evidence · text

> 0.20% Cu lower cut off, maximum 2m internal dilution.

### 26MCRD002

[Link to this fact](https://atlas-staging.minestarters.com/news/qml-copper-discovery-at-mt-chalmers--fe382ad6-14fe-48fd-abdf-bcef62bdf4fa#fact-drill-facts-7)

Mt Chalmers West · gold

Historical result

Needs review: historical\_restatement

#### Identity

- Hole ID: 26MCRD002
- Project: Mt Chalmers West
- Commodity: gold
- Region: australia\_qld
- Reported Region: australia\_qld
- Ticker: QML

#### Geometry

- Grade: 0.21
- Grade Unit: g/t
- Intercept: 1 m
- From: 90 m
- To: 91 m
- Hole Depth: 211.5 m
- Intercept Depth: 90 m

#### Classification

- Deposit Type: vms
- Program: exploration
- Sample Type: drill
- Group ID: 26MCRD002:90-91
- Mining Method: unknown

#### Location

- Easting: 260013
- Northing: 7421420
- CRS: UTM
- Elevation: 125.3 m
- Azimuth: 240 °
- Dip: -75.1 °
- Loc. Confidence: high
- Loc. Source: document

#### QA/QC

- Laboratory: ALS Brisbane
- QA/QC Disclosed: Yes
- QP Signed: Yes

#### Deleterious

- Deleterious Flag: No

#### Compositing

- Cutoff Grade: 0.2
- Cutoff Unit: % Cu
- Dilution Disclosed: Yes
- Max Dilution: 2 m

#### Review

- Needs Review: Yes
- Review Reason: historical\_restatement
- Interp. Status: scored
- Historical: Yes

#### Dates

- Event date: 2026-10-11T00:00:00.000Z

Reasoning: This previously reported gold intercept shows a weak grade over a narrow width, contributing little new information.

- Positive factor: QA/QC procedures disclosed

- Positive factor: Compositing parameters transparent

- Negative factor: Result is previously reported, low novelty

Evidence · table

> 0.21

Context: 1

#### Tags used in scoring

**Nearology Play**

Polarity: neutral

Definition: Value premise rests on proximity to a known deposit rather than own results.

Why it applies: proximity is offered as the value premise: "1 A N N O U N C E M E N T QMINES DISCOVERS COPPER SULPHIDES 180M BEYOND MT CHALMERS RESOURCE HIGHLIGHTS • New Copper Dis"

#### Rejected tags

**Stale Data Re-release** — Rejected; excluded from scoring

Polarity: negative

Definition: Historical results re-announced with no new assays or reinterpretation — low genuine novelty.

Reason: The intercept is explicitly marked as 'Previously reported' in the table.

Evidence · table

> Previously reported

Context: 26MCRD002

**QA/QC Disclosed** — Rejected; excluded from scoring

Polarity: positive

Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\).

Reason: The JORC table details internal QA/QC review by QMines technical personnel and the Competent Person.

Evidence · text

> Drilling, logging, sampling, assay and QAQC data were internally reviewed by QMines technical personnel and the Competent Person.

**Compositing Transparent** — Rejected; excluded from scoring

Polarity: positive

Definition: Cut-off grade and internal dilution rules are clearly stated for reported intervals.

Reason: The table specifies a 0.20% Cu lower cut off and maximum 2m internal dilution for the reported intercepts.

Evidence · text

> 0.20% Cu lower cut off, maximum 2m internal dilution.

### 26MCRD002

[Link to this fact](https://atlas-staging.minestarters.com/news/qml-copper-discovery-at-mt-chalmers--fe382ad6-14fe-48fd-abdf-bcef62bdf4fa#fact-drill-facts-8)

Mt Chalmers West · zinc

Historical result

Needs review: historical\_restatement

#### Identity

- Hole ID: 26MCRD002
- Project: Mt Chalmers West
- Commodity: zinc
- Region: australia\_qld
- Reported Region: australia\_qld
- Ticker: QML

#### Geometry

- Grade: 1.28
- Grade Unit: %
- Intercept: 1 m
- From: 90 m
- To: 91 m
- Hole Depth: 211.5 m
- Intercept Depth: 90 m

#### Classification

- Deposit Type: vms
- Program: exploration
- Sample Type: drill
- Group ID: 26MCRD002:90-91
- Mining Method: unknown

#### Location

- Easting: 260013
- Northing: 7421420
- CRS: UTM
- Elevation: 125.3 m
- Azimuth: 240 °
- Dip: -75.1 °
- Loc. Confidence: high
- Loc. Source: document

#### QA/QC

- Laboratory: ALS Brisbane
- QA/QC Disclosed: Yes
- QP Signed: Yes

#### Deleterious

- Deleterious Flag: No

#### Compositing

- Cutoff Grade: 0.2
- Cutoff Unit: % Cu
- Dilution Disclosed: Yes
- Max Dilution: 2 m

#### Review

- Needs Review: Yes
- Review Reason: historical\_restatement
- Interp. Status: scored
- Historical: Yes

#### Dates

- Event date: 2026-10-11T00:00:00.000Z

Reasoning: This previously reported zinc intercept shows a weak grade over a narrow width, contributing little new information.

- Positive factor: QA/QC procedures disclosed

- Positive factor: Compositing parameters transparent

- Negative factor: Result is previously reported, low novelty

Evidence · table

> 1.28

Context: 1

#### Tags used in scoring

**Nearology Play**

Polarity: neutral

Definition: Value premise rests on proximity to a known deposit rather than own results.

Why it applies: proximity is offered as the value premise: "1 A N N O U N C E M E N T QMINES DISCOVERS COPPER SULPHIDES 180M BEYOND MT CHALMERS RESOURCE HIGHLIGHTS • New Copper Dis"

#### Rejected tags

**Stale Data Re-release** — Rejected; excluded from scoring

Polarity: negative

Definition: Historical results re-announced with no new assays or reinterpretation — low genuine novelty.

Reason: The intercept is explicitly marked as 'Previously reported' in the table.

Evidence · table

> Previously reported

Context: 26MCRD002

**QA/QC Disclosed** — Rejected; excluded from scoring

Polarity: positive

Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\).

Reason: The JORC table details internal QA/QC review by QMines technical personnel and the Competent Person.

Evidence · text

> Drilling, logging, sampling, assay and QAQC data were internally reviewed by QMines technical personnel and the Competent Person.

**Compositing Transparent** — Rejected; excluded from scoring

Polarity: positive

Definition: Cut-off grade and internal dilution rules are clearly stated for reported intervals.

Reason: The table specifies a 0.20% Cu lower cut off and maximum 2m internal dilution for the reported intercepts.

Evidence · text

> 0.20% Cu lower cut off, maximum 2m internal dilution.

### 26MCRD002

[Link to this fact](https://atlas-staging.minestarters.com/news/qml-copper-discovery-at-mt-chalmers--fe382ad6-14fe-48fd-abdf-bcef62bdf4fa#fact-drill-facts-9)

Mt Chalmers West · silver

Historical result

Needs review: historical\_restatement

#### Identity

- Hole ID: 26MCRD002
- Project: Mt Chalmers West
- Commodity: silver
- Region: australia\_qld
- Reported Region: australia\_qld
- Ticker: QML

#### Geometry

- Grade: 7.3
- Grade Unit: g/t
- Intercept: 1 m
- From: 90 m
- To: 91 m
- Hole Depth: 211.5 m
- Intercept Depth: 90 m

#### Classification

- Deposit Type: vms
- Program: exploration
- Sample Type: drill
- Group ID: 26MCRD002:90-91
- Mining Method: unknown

#### Location

- Easting: 260013
- Northing: 7421420
- CRS: UTM
- Elevation: 125.3 m
- Azimuth: 240 °
- Dip: -75.1 °
- Loc. Confidence: high
- Loc. Source: document

#### QA/QC

- Laboratory: ALS Brisbane
- QA/QC Disclosed: Yes
- QP Signed: Yes

#### Deleterious

- Deleterious Flag: No

#### Compositing

- Cutoff Grade: 0.2
- Cutoff Unit: % Cu
- Dilution Disclosed: Yes
- Max Dilution: 2 m

#### Review

- Needs Review: Yes
- Review Reason: historical\_restatement
- Interp. Status: scored
- Historical: Yes

#### Dates

- Event date: 2026-10-11T00:00:00.000Z

Reasoning: This previously reported silver intercept shows a weak grade over a narrow width, contributing little new information.

- Positive factor: QA/QC procedures disclosed

- Positive factor: Compositing parameters transparent

- Negative factor: Result is previously reported, low novelty

Evidence · table

> 7.3

Context: 1

#### Tags used in scoring

**Nearology Play**

Polarity: neutral

Definition: Value premise rests on proximity to a known deposit rather than own results.

Why it applies: proximity is offered as the value premise: "1 A N N O U N C E M E N T QMINES DISCOVERS COPPER SULPHIDES 180M BEYOND MT CHALMERS RESOURCE HIGHLIGHTS • New Copper Dis"

#### Rejected tags

**Stale Data Re-release** — Rejected; excluded from scoring

Polarity: negative

Definition: Historical results re-announced with no new assays or reinterpretation — low genuine novelty.

Reason: The intercept is explicitly marked as 'Previously reported' in the table.

Evidence · table

> Previously reported

Context: 26MCRD002

**QA/QC Disclosed** — Rejected; excluded from scoring

Polarity: positive

Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\).

Reason: The JORC table details internal QA/QC review by QMines technical personnel and the Competent Person.

Evidence · text

> Drilling, logging, sampling, assay and QAQC data were internally reviewed by QMines technical personnel and the Competent Person.

**Compositing Transparent** — Rejected; excluded from scoring

Polarity: positive

Definition: Cut-off grade and internal dilution rules are clearly stated for reported intervals.

Reason: The table specifies a 0.20% Cu lower cut off and maximum 2m internal dilution for the reported intercepts.

Evidence · text

> 0.20% Cu lower cut off, maximum 2m internal dilution.

### 26MCRD002

[Link to this fact](https://atlas-staging.minestarters.com/news/qml-copper-discovery-at-mt-chalmers--fe382ad6-14fe-48fd-abdf-bcef62bdf4fa#fact-drill-facts-10)

Mt Chalmers West · copper

Historical result

Needs review: historical\_restatement

#### Identity

- Hole ID: 26MCRD002
- Project: Mt Chalmers West
- Commodity: copper
- Region: australia\_qld
- Reported Region: australia\_qld
- Ticker: QML

#### Geometry

- Grade: 2.88
- Grade Unit: %
- Intercept: 35 m
- From: 107 m
- To: 142 m
- Hole Depth: 211.5 m
- Intercept Depth: 107 m

#### Classification

- Deposit Type: vms
- Program: exploration
- Sample Type: drill
- Group ID: 26MCRD002:107-142
- Mining Method: unknown

#### Location

- Easting: 260013
- Northing: 7421420
- CRS: UTM
- Elevation: 125.3 m
- Azimuth: 240 °
- Dip: -75.1 °
- Loc. Confidence: high
- Loc. Source: document

#### QA/QC

- Laboratory: ALS Brisbane
- QA/QC Disclosed: Yes
- QP Signed: Yes

#### Deleterious

- Deleterious Flag: No

#### Compositing

- Cutoff Grade: 0.2
- Cutoff Unit: % Cu
- Dilution Disclosed: Yes
- Max Dilution: 2 m

#### Review

- Needs Review: Yes
- Review Reason: historical\_restatement
- Interp. Status: scored
- Historical: Yes

#### Dates

- Event date: 2026-10-11T00:00:00.000Z

Reasoning: This previously reported intercept shows a strong copper grade over a significant width, indicating good mineralization, but has low novelty.

- Positive factor: Strong copper grade for VMS deposit type

- Positive factor: Significant intercept length \(35m\)

- Positive factor: QA/QC procedures disclosed

- Positive factor: Compositing parameters transparent

- Negative factor: Result is previously reported, low novelty

Evidence · table

> 2.88

Context: 35

#### Tags used in scoring

**Nearology Play**

Polarity: neutral

Definition: Value premise rests on proximity to a known deposit rather than own results.

Why it applies: proximity is offered as the value premise: "1 A N N O U N C E M E N T QMINES DISCOVERS COPPER SULPHIDES 180M BEYOND MT CHALMERS RESOURCE HIGHLIGHTS • New Copper Dis"

#### Rejected tags

**Stale Data Re-release** — Rejected; excluded from scoring

Polarity: negative

Definition: Historical results re-announced with no new assays or reinterpretation — low genuine novelty.

Reason: The intercept is explicitly marked as 'Previously reported' in the table.

Evidence · table

> Previously reported

Context: 26MCRD002

**QA/QC Disclosed** — Rejected; excluded from scoring

Polarity: positive

Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\).

Reason: The JORC table details internal QA/QC review by QMines technical personnel and the Competent Person.

Evidence · text

> Drilling, logging, sampling, assay and QAQC data were internally reviewed by QMines technical personnel and the Competent Person.

**Compositing Transparent** — Rejected; excluded from scoring

Polarity: positive

Definition: Cut-off grade and internal dilution rules are clearly stated for reported intervals.

Reason: The table specifies a 0.20% Cu lower cut off and maximum 2m internal dilution for the reported intercepts.

Evidence · text

> 0.20% Cu lower cut off, maximum 2m internal dilution.

### 26MCRD002

[Link to this fact](https://atlas-staging.minestarters.com/news/qml-copper-discovery-at-mt-chalmers--fe382ad6-14fe-48fd-abdf-bcef62bdf4fa#fact-drill-facts-11)

Mt Chalmers West · gold

Historical result

Needs review: historical\_restatement

#### Identity

- Hole ID: 26MCRD002
- Project: Mt Chalmers West
- Commodity: gold
- Region: australia\_qld
- Reported Region: australia\_qld
- Ticker: QML

#### Geometry

- Grade: 0.75
- Grade Unit: g/t
- Intercept: 35 m
- From: 107 m
- To: 142 m
- Hole Depth: 211.5 m
- Intercept Depth: 107 m

#### Classification

- Deposit Type: vms
- Program: exploration
- Sample Type: drill
- Group ID: 26MCRD002:107-142
- Mining Method: unknown

#### Location

- Easting: 260013
- Northing: 7421420
- CRS: UTM
- Elevation: 125.3 m
- Azimuth: 240 °
- Dip: -75.1 °
- Loc. Confidence: high
- Loc. Source: document

#### QA/QC

- Laboratory: ALS Brisbane
- QA/QC Disclosed: Yes
- QP Signed: Yes

#### Deleterious

- Deleterious Flag: No

#### Compositing

- Cutoff Grade: 0.2
- Cutoff Unit: % Cu
- Dilution Disclosed: Yes
- Max Dilution: 2 m

#### Review

- Needs Review: Yes
- Review Reason: historical\_restatement
- Interp. Status: scored
- Historical: Yes

#### Dates

- Event date: 2026-10-11T00:00:00.000Z

Reasoning: This previously reported gold intercept shows a moderate grade over a significant width, but has low novelty.

- Positive factor: QA/QC procedures disclosed

- Positive factor: Compositing parameters transparent

- Negative factor: Result is previously reported, low novelty

Evidence · table

> 0.75

Context: 35

#### Tags used in scoring

**Nearology Play**

Polarity: neutral

Definition: Value premise rests on proximity to a known deposit rather than own results.

Why it applies: proximity is offered as the value premise: "1 A N N O U N C E M E N T QMINES DISCOVERS COPPER SULPHIDES 180M BEYOND MT CHALMERS RESOURCE HIGHLIGHTS • New Copper Dis"

#### Rejected tags

**Stale Data Re-release** — Rejected; excluded from scoring

Polarity: negative

Definition: Historical results re-announced with no new assays or reinterpretation — low genuine novelty.

Reason: The intercept is explicitly marked as 'Previously reported' in the table.

Evidence · table

> Previously reported

Context: 26MCRD002

**QA/QC Disclosed** — Rejected; excluded from scoring

Polarity: positive

Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\).

Reason: The JORC table details internal QA/QC review by QMines technical personnel and the Competent Person.

Evidence · text

> Drilling, logging, sampling, assay and QAQC data were internally reviewed by QMines technical personnel and the Competent Person.

**Compositing Transparent** — Rejected; excluded from scoring

Polarity: positive

Definition: Cut-off grade and internal dilution rules are clearly stated for reported intervals.

Reason: The table specifies a 0.20% Cu lower cut off and maximum 2m internal dilution for the reported intercepts.

Evidence · text

> 0.20% Cu lower cut off, maximum 2m internal dilution.

### 26MCRD002

[Link to this fact](https://atlas-staging.minestarters.com/news/qml-copper-discovery-at-mt-chalmers--fe382ad6-14fe-48fd-abdf-bcef62bdf4fa#fact-drill-facts-12)

Mt Chalmers West · zinc

Historical result

Needs review: historical\_restatement

#### Identity

- Hole ID: 26MCRD002
- Project: Mt Chalmers West
- Commodity: zinc
- Region: australia\_qld
- Reported Region: australia\_qld
- Ticker: QML

#### Geometry

- Grade: 0.02
- Grade Unit: %
- Intercept: 35 m
- From: 107 m
- To: 142 m
- Hole Depth: 211.5 m
- Intercept Depth: 107 m

#### Classification

- Deposit Type: vms
- Program: exploration
- Sample Type: drill
- Group ID: 26MCRD002:107-142
- Mining Method: unknown

#### Location

- Easting: 260013
- Northing: 7421420
- CRS: UTM
- Elevation: 125.3 m
- Azimuth: 240 °
- Dip: -75.1 °
- Loc. Confidence: high
- Loc. Source: document

#### QA/QC

- Laboratory: ALS Brisbane
- QA/QC Disclosed: Yes
- QP Signed: Yes

#### Deleterious

- Deleterious Flag: No

#### Compositing

- Cutoff Grade: 0.2
- Cutoff Unit: % Cu
- Dilution Disclosed: Yes
- Max Dilution: 2 m

#### Review

- Needs Review: Yes
- Review Reason: historical\_restatement
- Interp. Status: scored
- Historical: Yes

#### Dates

- Event date: 2026-10-11T00:00:00.000Z

Reasoning: This previously reported zinc intercept shows a very low grade over a significant width, contributing little new information.

- Positive factor: QA/QC procedures disclosed

- Positive factor: Compositing parameters transparent

- Negative factor: Very low zinc grade

- Negative factor: Result is previously reported, low novelty

Evidence · table

> 0.02

Context: 35

#### Tags used in scoring

**Nearology Play**

Polarity: neutral

Definition: Value premise rests on proximity to a known deposit rather than own results.

Why it applies: proximity is offered as the value premise: "1 A N N O U N C E M E N T QMINES DISCOVERS COPPER SULPHIDES 180M BEYOND MT CHALMERS RESOURCE HIGHLIGHTS • New Copper Dis"

#### Rejected tags

**Stale Data Re-release** — Rejected; excluded from scoring

Polarity: negative

Definition: Historical results re-announced with no new assays or reinterpretation — low genuine novelty.

Reason: The intercept is explicitly marked as 'Previously reported' in the table.

Evidence · table

> Previously reported

Context: 26MCRD002

**QA/QC Disclosed** — Rejected; excluded from scoring

Polarity: positive

Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\).

Reason: The JORC table details internal QA/QC review by QMines technical personnel and the Competent Person.

Evidence · text

> Drilling, logging, sampling, assay and QAQC data were internally reviewed by QMines technical personnel and the Competent Person.

**Compositing Transparent** — Rejected; excluded from scoring

Polarity: positive

Definition: Cut-off grade and internal dilution rules are clearly stated for reported intervals.

Reason: The table specifies a 0.20% Cu lower cut off and maximum 2m internal dilution for the reported intercepts.

Evidence · text

> 0.20% Cu lower cut off, maximum 2m internal dilution.

### 26MCRD002

[Link to this fact](https://atlas-staging.minestarters.com/news/qml-copper-discovery-at-mt-chalmers--fe382ad6-14fe-48fd-abdf-bcef62bdf4fa#fact-drill-facts-13)

Mt Chalmers West · silver

Historical result

Needs review: historical\_restatement

#### Identity

- Hole ID: 26MCRD002
- Project: Mt Chalmers West
- Commodity: silver
- Region: australia\_qld
- Reported Region: australia\_qld
- Ticker: QML

#### Geometry

- Grade: 3.3
- Grade Unit: g/t
- Intercept: 35 m
- From: 107 m
- To: 142 m
- Hole Depth: 211.5 m
- Intercept Depth: 107 m

#### Classification

- Deposit Type: vms
- Program: exploration
- Sample Type: drill
- Group ID: 26MCRD002:107-142
- Mining Method: unknown

#### Location

- Easting: 260013
- Northing: 7421420
- CRS: UTM
- Elevation: 125.3 m
- Azimuth: 240 °
- Dip: -75.1 °
- Loc. Confidence: high
- Loc. Source: document

#### QA/QC

- Laboratory: ALS Brisbane
- QA/QC Disclosed: Yes
- QP Signed: Yes

#### Deleterious

- Deleterious Flag: No

#### Compositing

- Cutoff Grade: 0.2
- Cutoff Unit: % Cu
- Dilution Disclosed: Yes
- Max Dilution: 2 m

#### Review

- Needs Review: Yes
- Review Reason: historical\_restatement
- Interp. Status: scored
- Historical: Yes

#### Dates

- Event date: 2026-10-11T00:00:00.000Z

Reasoning: This previously reported silver intercept shows a very low grade over a significant width, contributing little new information.

- Positive factor: QA/QC procedures disclosed

- Positive factor: Compositing parameters transparent

- Negative factor: Very low silver grade

- Negative factor: Result is previously reported, low novelty

Evidence · table

> 3.3

Context: 35

#### Tags used in scoring

**Nearology Play**

Polarity: neutral

Definition: Value premise rests on proximity to a known deposit rather than own results.

Why it applies: proximity is offered as the value premise: "1 A N N O U N C E M E N T QMINES DISCOVERS COPPER SULPHIDES 180M BEYOND MT CHALMERS RESOURCE HIGHLIGHTS • New Copper Dis"

#### Rejected tags

**Stale Data Re-release** — Rejected; excluded from scoring

Polarity: negative

Definition: Historical results re-announced with no new assays or reinterpretation — low genuine novelty.

Reason: The intercept is explicitly marked as 'Previously reported' in the table.

Evidence · table

> Previously reported

Context: 26MCRD002

**QA/QC Disclosed** — Rejected; excluded from scoring

Polarity: positive

Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\).

Reason: The JORC table details internal QA/QC review by QMines technical personnel and the Competent Person.

Evidence · text

> Drilling, logging, sampling, assay and QAQC data were internally reviewed by QMines technical personnel and the Competent Person.

**Compositing Transparent** — Rejected; excluded from scoring

Polarity: positive

Definition: Cut-off grade and internal dilution rules are clearly stated for reported intervals.

Reason: The table specifies a 0.20% Cu lower cut off and maximum 2m internal dilution for the reported intercepts.

Evidence · text

> 0.20% Cu lower cut off, maximum 2m internal dilution.

### 26MCRD002

[Link to this fact](https://atlas-staging.minestarters.com/news/qml-copper-discovery-at-mt-chalmers--fe382ad6-14fe-48fd-abdf-bcef62bdf4fa#fact-drill-facts-14)

Mt Chalmers West · copper

Historical result

Needs review: historical\_restatement

#### Identity

- Hole ID: 26MCRD002
- Project: Mt Chalmers West
- Commodity: copper
- Region: australia\_qld
- Reported Region: australia\_qld
- Ticker: QML

#### Geometry

- Grade: 3.22
- Grade Unit: %
- Intercept: 31 m
- From: 110 m
- To: 141 m
- Hole Depth: 211.5 m
- Intercept Depth: 110 m

#### Classification

- Deposit Type: vms
- Program: exploration
- Sample Type: drill
- Group ID: 26MCRD002:110-141
- Mining Method: unknown

#### Location

- Easting: 260013
- Northing: 7421420
- CRS: UTM
- Elevation: 125.3 m
- Azimuth: 240 °
- Dip: -75.1 °
- Loc. Confidence: high
- Loc. Source: document

#### QA/QC

- Laboratory: ALS Brisbane
- QA/QC Disclosed: Yes
- QP Signed: Yes

#### Deleterious

- Deleterious Flag: No

#### Compositing

- Cutoff Grade: 0.2
- Cutoff Unit: % Cu
- Dilution Disclosed: Yes
- Max Dilution: 2 m

#### Review

- Needs Review: Yes
- Review Reason: historical\_restatement
- Interp. Status: scored
- Historical: Yes

#### Dates

- Event date: 2026-10-11T00:00:00.000Z

Reasoning: This previously reported sub-interval shows a strong copper grade over a significant width, indicating good mineralization, but has low novelty.

- Positive factor: Strong copper grade for VMS deposit type

- Positive factor: Significant intercept length \(31m\)

- Positive factor: QA/QC procedures disclosed

- Positive factor: Compositing parameters transparent

- Negative factor: Result is previously reported, low novelty

Evidence · table

> 3.22

Context: 31

#### Tags used in scoring

**Nearology Play**

Polarity: neutral

Definition: Value premise rests on proximity to a known deposit rather than own results.

Why it applies: proximity is offered as the value premise: "1 A N N O U N C E M E N T QMINES DISCOVERS COPPER SULPHIDES 180M BEYOND MT CHALMERS RESOURCE HIGHLIGHTS • New Copper Dis"

#### Rejected tags

**Stale Data Re-release** — Rejected; excluded from scoring

Polarity: negative

Definition: Historical results re-announced with no new assays or reinterpretation — low genuine novelty.

Reason: The intercept is explicitly marked as 'Previously reported' in the table.

Evidence · table

> Previously reported

Context: 26MCRD002

**QA/QC Disclosed** — Rejected; excluded from scoring

Polarity: positive

Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\).

Reason: The JORC table details internal QA/QC review by QMines technical personnel and the Competent Person.

Evidence · text

> Drilling, logging, sampling, assay and QAQC data were internally reviewed by QMines technical personnel and the Competent Person.

**Compositing Transparent** — Rejected; excluded from scoring

Polarity: positive

Definition: Cut-off grade and internal dilution rules are clearly stated for reported intervals.

Reason: The table specifies a 0.20% Cu lower cut off and maximum 2m internal dilution for the reported intercepts.

Evidence · text

> 0.20% Cu lower cut off, maximum 2m internal dilution.

### 26MCRD002

[Link to this fact](https://atlas-staging.minestarters.com/news/qml-copper-discovery-at-mt-chalmers--fe382ad6-14fe-48fd-abdf-bcef62bdf4fa#fact-drill-facts-15)

Mt Chalmers West · gold

Historical result

Needs review: historical\_restatement

#### Identity

- Hole ID: 26MCRD002
- Project: Mt Chalmers West
- Commodity: gold
- Region: australia\_qld
- Reported Region: australia\_qld
- Ticker: QML

#### Geometry

- Grade: 0.83
- Grade Unit: g/t
- Intercept: 31 m
- From: 110 m
- To: 141 m
- Hole Depth: 211.5 m
- Intercept Depth: 110 m

#### Classification

- Deposit Type: vms
- Program: exploration
- Sample Type: drill
- Group ID: 26MCRD002:110-141
- Mining Method: unknown

#### Location

- Easting: 260013
- Northing: 7421420
- CRS: UTM
- Elevation: 125.3 m
- Azimuth: 240 °
- Dip: -75.1 °
- Loc. Confidence: high
- Loc. Source: document

#### QA/QC

- Laboratory: ALS Brisbane
- QA/QC Disclosed: Yes
- QP Signed: Yes

#### Deleterious

- Deleterious Flag: No

#### Compositing

- Cutoff Grade: 0.2
- Cutoff Unit: % Cu
- Dilution Disclosed: Yes
- Max Dilution: 2 m

#### Review

- Needs Review: Yes
- Review Reason: historical\_restatement
- Interp. Status: scored
- Historical: Yes

#### Dates

- Event date: 2026-10-11T00:00:00.000Z

Reasoning: This previously reported sub-interval shows a moderate gold grade over a significant width, but has low novelty.

- Positive factor: QA/QC procedures disclosed

- Positive factor: Compositing parameters transparent

- Negative factor: Result is previously reported, low novelty

Evidence · table

> 0.83

Context: 31

#### Tags used in scoring

**Nearology Play**

Polarity: neutral

Definition: Value premise rests on proximity to a known deposit rather than own results.

Why it applies: proximity is offered as the value premise: "1 A N N O U N C E M E N T QMINES DISCOVERS COPPER SULPHIDES 180M BEYOND MT CHALMERS RESOURCE HIGHLIGHTS • New Copper Dis"

#### Rejected tags

**Stale Data Re-release** — Rejected; excluded from scoring

Polarity: negative

Definition: Historical results re-announced with no new assays or reinterpretation — low genuine novelty.

Reason: The intercept is explicitly marked as 'Previously reported' in the table.

Evidence · table

> Previously reported

Context: 26MCRD002

**QA/QC Disclosed** — Rejected; excluded from scoring

Polarity: positive

Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\).

Reason: The JORC table details internal QA/QC review by QMines technical personnel and the Competent Person.

Evidence · text

> Drilling, logging, sampling, assay and QAQC data were internally reviewed by QMines technical personnel and the Competent Person.

**Compositing Transparent** — Rejected; excluded from scoring

Polarity: positive

Definition: Cut-off grade and internal dilution rules are clearly stated for reported intervals.

Reason: The table specifies a 0.20% Cu lower cut off and maximum 2m internal dilution for the reported intercepts.

Evidence · text

> 0.20% Cu lower cut off, maximum 2m internal dilution.

### 26MCRD002

[Link to this fact](https://atlas-staging.minestarters.com/news/qml-copper-discovery-at-mt-chalmers--fe382ad6-14fe-48fd-abdf-bcef62bdf4fa#fact-drill-facts-16)

Mt Chalmers West · zinc

Historical result

Needs review: historical\_restatement

#### Identity

- Hole ID: 26MCRD002
- Project: Mt Chalmers West
- Commodity: zinc
- Region: australia\_qld
- Reported Region: australia\_qld
- Ticker: QML

#### Geometry

- Grade: 0.02
- Grade Unit: %
- Intercept: 31 m
- From: 110 m
- To: 141 m
- Hole Depth: 211.5 m
- Intercept Depth: 110 m

#### Classification

- Deposit Type: vms
- Program: exploration
- Sample Type: drill
- Group ID: 26MCRD002:110-141
- Mining Method: unknown

#### Location

- Easting: 260013
- Northing: 7421420
- CRS: UTM
- Elevation: 125.3 m
- Azimuth: 240 °
- Dip: -75.1 °
- Loc. Confidence: high
- Loc. Source: document

#### QA/QC

- Laboratory: ALS Brisbane
- QA/QC Disclosed: Yes
- QP Signed: Yes

#### Deleterious

- Deleterious Flag: No

#### Compositing

- Cutoff Grade: 0.2
- Cutoff Unit: % Cu
- Dilution Disclosed: Yes
- Max Dilution: 2 m

#### Review

- Needs Review: Yes
- Review Reason: historical\_restatement
- Interp. Status: scored
- Historical: Yes

#### Dates

- Event date: 2026-10-11T00:00:00.000Z

Reasoning: This previously reported sub-interval shows a very low zinc grade over a significant width, contributing little new information.

- Positive factor: QA/QC procedures disclosed

- Positive factor: Compositing parameters transparent

- Negative factor: Very low zinc grade

- Negative factor: Result is previously reported, low novelty

Evidence · table

> 0.02

Context: 31

#### Tags used in scoring

**Nearology Play**

Polarity: neutral

Definition: Value premise rests on proximity to a known deposit rather than own results.

Why it applies: proximity is offered as the value premise: "1 A N N O U N C E M E N T QMINES DISCOVERS COPPER SULPHIDES 180M BEYOND MT CHALMERS RESOURCE HIGHLIGHTS • New Copper Dis"

#### Rejected tags

**Stale Data Re-release** — Rejected; excluded from scoring

Polarity: negative

Definition: Historical results re-announced with no new assays or reinterpretation — low genuine novelty.

Reason: The intercept is explicitly marked as 'Previously reported' in the table.

Evidence · table

> Previously reported

Context: 26MCRD002

**QA/QC Disclosed** — Rejected; excluded from scoring

Polarity: positive

Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\).

Reason: The JORC table details internal QA/QC review by QMines technical personnel and the Competent Person.

Evidence · text

> Drilling, logging, sampling, assay and QAQC data were internally reviewed by QMines technical personnel and the Competent Person.

**Compositing Transparent** — Rejected; excluded from scoring

Polarity: positive

Definition: Cut-off grade and internal dilution rules are clearly stated for reported intervals.

Reason: The table specifies a 0.20% Cu lower cut off and maximum 2m internal dilution for the reported intercepts.

Evidence · text

> 0.20% Cu lower cut off, maximum 2m internal dilution.

### 26MCRD002

[Link to this fact](https://atlas-staging.minestarters.com/news/qml-copper-discovery-at-mt-chalmers--fe382ad6-14fe-48fd-abdf-bcef62bdf4fa#fact-drill-facts-17)

Mt Chalmers West · silver

Historical result

Needs review: historical\_restatement

#### Identity

- Hole ID: 26MCRD002
- Project: Mt Chalmers West
- Commodity: silver
- Region: australia\_qld
- Reported Region: australia\_qld
- Ticker: QML

#### Geometry

- Grade: 3.6
- Grade Unit: g/t
- Intercept: 31 m
- From: 110 m
- To: 141 m
- Hole Depth: 211.5 m
- Intercept Depth: 110 m

#### Classification

- Deposit Type: vms
- Program: exploration
- Sample Type: drill
- Group ID: 26MCRD002:110-141
- Mining Method: unknown

#### Location

- Easting: 260013
- Northing: 7421420
- CRS: UTM
- Elevation: 125.3 m
- Azimuth: 240 °
- Dip: -75.1 °
- Loc. Confidence: high
- Loc. Source: document

#### QA/QC

- Laboratory: ALS Brisbane
- QA/QC Disclosed: Yes
- QP Signed: Yes

#### Deleterious

- Deleterious Flag: No

#### Compositing

- Cutoff Grade: 0.2
- Cutoff Unit: % Cu
- Dilution Disclosed: Yes
- Max Dilution: 2 m

#### Review

- Needs Review: Yes
- Review Reason: historical\_restatement
- Interp. Status: scored
- Historical: Yes

#### Dates

- Event date: 2026-10-11T00:00:00.000Z

Reasoning: This previously reported sub-interval shows a very low silver grade over a significant width, contributing little new information.

- Positive factor: QA/QC procedures disclosed

- Positive factor: Compositing parameters transparent

- Negative factor: Very low silver grade

- Negative factor: Result is previously reported, low novelty

Evidence · table

> 3.6

Context: 31

#### Tags used in scoring

**Nearology Play**

Polarity: neutral

Definition: Value premise rests on proximity to a known deposit rather than own results.

Why it applies: proximity is offered as the value premise: "1 A N N O U N C E M E N T QMINES DISCOVERS COPPER SULPHIDES 180M BEYOND MT CHALMERS RESOURCE HIGHLIGHTS • New Copper Dis"

#### Rejected tags

**Stale Data Re-release** — Rejected; excluded from scoring

Polarity: negative

Definition: Historical results re-announced with no new assays or reinterpretation — low genuine novelty.

Reason: The intercept is explicitly marked as 'Previously reported' in the table.

Evidence · table

> Previously reported

Context: 26MCRD002

**QA/QC Disclosed** — Rejected; excluded from scoring

Polarity: positive

Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\).

Reason: The JORC table details internal QA/QC review by QMines technical personnel and the Competent Person.

Evidence · text

> Drilling, logging, sampling, assay and QAQC data were internally reviewed by QMines technical personnel and the Competent Person.

**Compositing Transparent** — Rejected; excluded from scoring

Polarity: positive

Definition: Cut-off grade and internal dilution rules are clearly stated for reported intervals.

Reason: The table specifies a 0.20% Cu lower cut off and maximum 2m internal dilution for the reported intercepts.

Evidence · text

> 0.20% Cu lower cut off, maximum 2m internal dilution.

### 26MCRD002

[Link to this fact](https://atlas-staging.minestarters.com/news/qml-copper-discovery-at-mt-chalmers--fe382ad6-14fe-48fd-abdf-bcef62bdf4fa#fact-drill-facts-18)

Mt Chalmers West · copper

Historical result

Needs review: historical\_restatement

#### Identity

- Hole ID: 26MCRD002
- Project: Mt Chalmers West
- Commodity: copper
- Region: australia\_qld
- Reported Region: australia\_qld
- Ticker: QML

#### Geometry

- Grade: 0.89
- Grade Unit: %
- Intercept: 4 m
- From: 146 m
- To: 150 m
- Hole Depth: 211.5 m
- Intercept Depth: 146 m

#### Classification

- Deposit Type: vms
- Program: exploration
- Sample Type: drill
- Group ID: 26MCRD002:146-150
- Mining Method: unknown

#### Location

- Easting: 260013
- Northing: 7421420
- CRS: UTM
- Elevation: 125.3 m
- Azimuth: 240 °
- Dip: -75.1 °
- Loc. Confidence: high
- Loc. Source: document

#### QA/QC

- Laboratory: ALS Brisbane
- QA/QC Disclosed: Yes
- QP Signed: Yes

#### Deleterious

- Deleterious Flag: No

#### Compositing

- Cutoff Grade: 0.2
- Cutoff Unit: % Cu
- Dilution Disclosed: Yes
- Max Dilution: 2 m

#### Review

- Needs Review: Yes
- Review Reason: historical\_restatement
- Interp. Status: scored
- Historical: Yes

#### Dates

- Event date: 2026-10-11T00:00:00.000Z

Reasoning: This previously reported sub-interval shows a moderate copper grade over a narrow width, but has low novelty.

- Positive factor: Moderate copper grade for VMS deposit type

- Positive factor: QA/QC procedures disclosed

- Positive factor: Compositing parameters transparent

- Negative factor: Result is previously reported, low novelty

Evidence · table

> 0.89

Context: 4

#### Tags used in scoring

**Nearology Play**

Polarity: neutral

Definition: Value premise rests on proximity to a known deposit rather than own results.

Why it applies: proximity is offered as the value premise: "1 A N N O U N C E M E N T QMINES DISCOVERS COPPER SULPHIDES 180M BEYOND MT CHALMERS RESOURCE HIGHLIGHTS • New Copper Dis"

#### Rejected tags

**Stale Data Re-release** — Rejected; excluded from scoring

Polarity: negative

Definition: Historical results re-announced with no new assays or reinterpretation — low genuine novelty.

Reason: The intercept is explicitly marked as 'Previously reported' in the table.

Evidence · table

> Previously reported

Context: 26MCRD002

**QA/QC Disclosed** — Rejected; excluded from scoring

Polarity: positive

Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\).

Reason: The JORC table details internal QA/QC review by QMines technical personnel and the Competent Person.

Evidence · text

> Drilling, logging, sampling, assay and QAQC data were internally reviewed by QMines technical personnel and the Competent Person.

**Compositing Transparent** — Rejected; excluded from scoring

Polarity: positive

Definition: Cut-off grade and internal dilution rules are clearly stated for reported intervals.

Reason: The table specifies a 0.20% Cu lower cut off and maximum 2m internal dilution for the reported intercepts.

Evidence · text

> 0.20% Cu lower cut off, maximum 2m internal dilution.

### 26MCRD002

[Link to this fact](https://atlas-staging.minestarters.com/news/qml-copper-discovery-at-mt-chalmers--fe382ad6-14fe-48fd-abdf-bcef62bdf4fa#fact-drill-facts-19)

Mt Chalmers West · gold

Historical result

Needs review: historical\_restatement

#### Identity

- Hole ID: 26MCRD002
- Project: Mt Chalmers West
- Commodity: gold
- Region: australia\_qld
- Reported Region: australia\_qld
- Ticker: QML

#### Geometry

- Grade: 0.21
- Grade Unit: g/t
- Intercept: 4 m
- From: 146 m
- To: 150 m
- Hole Depth: 211.5 m
- Intercept Depth: 146 m

#### Classification

- Deposit Type: vms
- Program: exploration
- Sample Type: drill
- Group ID: 26MCRD002:146-150
- Mining Method: unknown

#### Location

- Easting: 260013
- Northing: 7421420
- CRS: UTM
- Elevation: 125.3 m
- Azimuth: 240 °
- Dip: -75.1 °
- Loc. Confidence: high
- Loc. Source: document

#### QA/QC

- Laboratory: ALS Brisbane
- QA/QC Disclosed: Yes
- QP Signed: Yes

#### Deleterious

- Deleterious Flag: No

#### Compositing

- Cutoff Grade: 0.2
- Cutoff Unit: % Cu
- Dilution Disclosed: Yes
- Max Dilution: 2 m

#### Review

- Needs Review: Yes
- Review Reason: historical\_restatement
- Interp. Status: scored
- Historical: Yes

#### Dates

- Event date: 2026-10-11T00:00:00.000Z

Reasoning: This previously reported sub-interval shows a weak gold grade over a narrow width, but has low novelty.

- Positive factor: QA/QC procedures disclosed

- Positive factor: Compositing parameters transparent

- Negative factor: Result is previously reported, low novelty

Evidence · table

> 0.21

Context: 4

#### Tags used in scoring

**Nearology Play**

Polarity: neutral

Definition: Value premise rests on proximity to a known deposit rather than own results.

Why it applies: proximity is offered as the value premise: "1 A N N O U N C E M E N T QMINES DISCOVERS COPPER SULPHIDES 180M BEYOND MT CHALMERS RESOURCE HIGHLIGHTS • New Copper Dis"

#### Rejected tags

**Stale Data Re-release** — Rejected; excluded from scoring

Polarity: negative

Definition: Historical results re-announced with no new assays or reinterpretation — low genuine novelty.

Reason: The intercept is explicitly marked as 'Previously reported' in the table.

Evidence · table

> Previously reported

Context: 26MCRD002

**QA/QC Disclosed** — Rejected; excluded from scoring

Polarity: positive

Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\).

Reason: The JORC table details internal QA/QC review by QMines technical personnel and the Competent Person.

Evidence · text

> Drilling, logging, sampling, assay and QAQC data were internally reviewed by QMines technical personnel and the Competent Person.

**Compositing Transparent** — Rejected; excluded from scoring

Polarity: positive

Definition: Cut-off grade and internal dilution rules are clearly stated for reported intervals.

Reason: The table specifies a 0.20% Cu lower cut off and maximum 2m internal dilution for the reported intercepts.

Evidence · text

> 0.20% Cu lower cut off, maximum 2m internal dilution.

### 26MCRD002

[Link to this fact](https://atlas-staging.minestarters.com/news/qml-copper-discovery-at-mt-chalmers--fe382ad6-14fe-48fd-abdf-bcef62bdf4fa#fact-drill-facts-20)

Mt Chalmers West · zinc

Historical result

Needs review: historical\_restatement

#### Identity

- Hole ID: 26MCRD002
- Project: Mt Chalmers West
- Commodity: zinc
- Region: australia\_qld
- Reported Region: australia\_qld
- Ticker: QML

#### Geometry

- Grade: 0.02
- Grade Unit: %
- Intercept: 4 m
- From: 146 m
- To: 150 m
- Hole Depth: 211.5 m
- Intercept Depth: 146 m

#### Classification

- Deposit Type: vms
- Program: exploration
- Sample Type: drill
- Group ID: 26MCRD002:146-150
- Mining Method: unknown

#### Location

- Easting: 260013
- Northing: 7421420
- CRS: UTM
- Elevation: 125.3 m
- Azimuth: 240 °
- Dip: -75.1 °
- Loc. Confidence: high
- Loc. Source: document

#### QA/QC

- Laboratory: ALS Brisbane
- QA/QC Disclosed: Yes
- QP Signed: Yes

#### Deleterious

- Deleterious Flag: No

#### Compositing

- Cutoff Grade: 0.2
- Cutoff Unit: % Cu
- Dilution Disclosed: Yes
- Max Dilution: 2 m

#### Review

- Needs Review: Yes
- Review Reason: historical\_restatement
- Interp. Status: scored
- Historical: Yes

#### Dates

- Event date: 2026-10-11T00:00:00.000Z

Reasoning: This previously reported sub-interval shows a very low zinc grade over a narrow width, contributing little new information.

- Positive factor: QA/QC procedures disclosed

- Positive factor: Compositing parameters transparent

- Negative factor: Very low zinc grade

- Negative factor: Result is previously reported, low novelty

Evidence · table

> 0.02

Context: 4

#### Tags used in scoring

**Nearology Play**

Polarity: neutral

Definition: Value premise rests on proximity to a known deposit rather than own results.

Why it applies: proximity is offered as the value premise: "1 A N N O U N C E M E N T QMINES DISCOVERS COPPER SULPHIDES 180M BEYOND MT CHALMERS RESOURCE HIGHLIGHTS • New Copper Dis"

#### Rejected tags

**Stale Data Re-release** — Rejected; excluded from scoring

Polarity: negative

Definition: Historical results re-announced with no new assays or reinterpretation — low genuine novelty.

Reason: The intercept is explicitly marked as 'Previously reported' in the table.

Evidence · table

> Previously reported

Context: 26MCRD002

**QA/QC Disclosed** — Rejected; excluded from scoring

Polarity: positive

Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\).

Reason: The JORC table details internal QA/QC review by QMines technical personnel and the Competent Person.

Evidence · text

> Drilling, logging, sampling, assay and QAQC data were internally reviewed by QMines technical personnel and the Competent Person.

**Compositing Transparent** — Rejected; excluded from scoring

Polarity: positive

Definition: Cut-off grade and internal dilution rules are clearly stated for reported intervals.

Reason: The table specifies a 0.20% Cu lower cut off and maximum 2m internal dilution for the reported intercepts.

Evidence · text

> 0.20% Cu lower cut off, maximum 2m internal dilution.

### 26MCRD002

[Link to this fact](https://atlas-staging.minestarters.com/news/qml-copper-discovery-at-mt-chalmers--fe382ad6-14fe-48fd-abdf-bcef62bdf4fa#fact-drill-facts-21)

Mt Chalmers West · silver

Historical result

Needs review: historical\_restatement

#### Identity

- Hole ID: 26MCRD002
- Project: Mt Chalmers West
- Commodity: silver
- Region: australia\_qld
- Reported Region: australia\_qld
- Ticker: QML

#### Geometry

- Grade: 2.2
- Grade Unit: g/t
- Intercept: 4 m
- From: 146 m
- To: 150 m
- Hole Depth: 211.5 m
- Intercept Depth: 146 m

#### Classification

- Deposit Type: vms
- Program: exploration
- Sample Type: drill
- Group ID: 26MCRD002:146-150
- Mining Method: unknown

#### Location

- Easting: 260013
- Northing: 7421420
- CRS: UTM
- Elevation: 125.3 m
- Azimuth: 240 °
- Dip: -75.1 °
- Loc. Confidence: high
- Loc. Source: document

#### QA/QC

- Laboratory: ALS Brisbane
- QA/QC Disclosed: Yes
- QP Signed: Yes

#### Deleterious

- Deleterious Flag: No

#### Compositing

- Cutoff Grade: 0.2
- Cutoff Unit: % Cu
- Dilution Disclosed: Yes
- Max Dilution: 2 m

#### Review

- Needs Review: Yes
- Review Reason: historical\_restatement
- Interp. Status: scored
- Historical: Yes

#### Dates

- Event date: 2026-10-11T00:00:00.000Z

Reasoning: This previously reported sub-interval shows a very low silver grade over a narrow width, contributing little new information.

- Positive factor: QA/QC procedures disclosed

- Positive factor: Compositing parameters transparent

- Negative factor: Very low silver grade

- Negative factor: Result is previously reported, low novelty

Evidence · table

> 2.2

Context: 4

#### Tags used in scoring

**Nearology Play**

Polarity: neutral

Definition: Value premise rests on proximity to a known deposit rather than own results.

Why it applies: proximity is offered as the value premise: "1 A N N O U N C E M E N T QMINES DISCOVERS COPPER SULPHIDES 180M BEYOND MT CHALMERS RESOURCE HIGHLIGHTS • New Copper Dis"

#### Rejected tags

**Stale Data Re-release** — Rejected; excluded from scoring

Polarity: negative

Definition: Historical results re-announced with no new assays or reinterpretation — low genuine novelty.

Reason: The intercept is explicitly marked as 'Previously reported' in the table.

Evidence · table

> Previously reported

Context: 26MCRD002

**QA/QC Disclosed** — Rejected; excluded from scoring

Polarity: positive

Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\).

Reason: The JORC table details internal QA/QC review by QMines technical personnel and the Competent Person.

Evidence · text

> Drilling, logging, sampling, assay and QAQC data were internally reviewed by QMines technical personnel and the Competent Person.

**Compositing Transparent** — Rejected; excluded from scoring

Polarity: positive

Definition: Cut-off grade and internal dilution rules are clearly stated for reported intervals.

Reason: The table specifies a 0.20% Cu lower cut off and maximum 2m internal dilution for the reported intercepts.

Evidence · text

> 0.20% Cu lower cut off, maximum 2m internal dilution.

### 26MCRD002

[Link to this fact](https://atlas-staging.minestarters.com/news/qml-copper-discovery-at-mt-chalmers--fe382ad6-14fe-48fd-abdf-bcef62bdf4fa#fact-drill-facts-22)

Mt Chalmers West · copper

Historical result

Needs review: historical\_restatement

#### Identity

- Hole ID: 26MCRD002
- Project: Mt Chalmers West
- Commodity: copper
- Region: australia\_qld
- Reported Region: australia\_qld
- Ticker: QML

#### Geometry

- Grade: 1.01
- Grade Unit: %
- Intercept: 1 m
- From: 160 m
- To: 161 m
- Hole Depth: 211.5 m
- Intercept Depth: 160 m

#### Classification

- Deposit Type: vms
- Program: exploration
- Sample Type: drill
- Group ID: 26MCRD002:160-161
- Mining Method: unknown

#### Location

- Easting: 260013
- Northing: 7421420
- CRS: UTM
- Elevation: 125.3 m
- Azimuth: 240 °
- Dip: -75.1 °
- Loc. Confidence: high
- Loc. Source: document

#### QA/QC

- Laboratory: ALS Brisbane
- QA/QC Disclosed: Yes
- QP Signed: Yes

#### Deleterious

- Deleterious Flag: No

#### Compositing

- Cutoff Grade: 0.2
- Cutoff Unit: % Cu
- Dilution Disclosed: Yes
- Max Dilution: 2 m

#### Review

- Needs Review: Yes
- Review Reason: historical\_restatement
- Interp. Status: scored
- Historical: Yes

#### Dates

- Event date: 2026-10-11T00:00:00.000Z

Reasoning: This previously reported sub-interval shows a moderate copper grade over a very narrow width, contributing little new information.

- Positive factor: Moderate copper grade for VMS deposit type

- Positive factor: QA/QC procedures disclosed

- Positive factor: Compositing parameters transparent

- Negative factor: Very narrow intercept length \(1m\)

- Negative factor: Result is previously reported, low novelty

Evidence · table

> 1.01

Context: 1

#### Tags used in scoring

**Nearology Play**

Polarity: neutral

Definition: Value premise rests on proximity to a known deposit rather than own results.

Why it applies: proximity is offered as the value premise: "1 A N N O U N C E M E N T QMINES DISCOVERS COPPER SULPHIDES 180M BEYOND MT CHALMERS RESOURCE HIGHLIGHTS • New Copper Dis"

#### Rejected tags

**Stale Data Re-release** — Rejected; excluded from scoring

Polarity: negative

Definition: Historical results re-announced with no new assays or reinterpretation — low genuine novelty.

Reason: The intercept is explicitly marked as 'Previously reported' in the table.

Evidence · table

> Previously reported

Context: 26MCRD002

**QA/QC Disclosed** — Rejected; excluded from scoring

Polarity: positive

Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\).

Reason: The JORC table details internal QA/QC review by QMines technical personnel and the Competent Person.

Evidence · text

> Drilling, logging, sampling, assay and QAQC data were internally reviewed by QMines technical personnel and the Competent Person.

**Compositing Transparent** — Rejected; excluded from scoring

Polarity: positive

Definition: Cut-off grade and internal dilution rules are clearly stated for reported intervals.

Reason: The table specifies a 0.20% Cu lower cut off and maximum 2m internal dilution for the reported intercepts.

Evidence · text

> 0.20% Cu lower cut off, maximum 2m internal dilution.

### 26MCRD002

[Link to this fact](https://atlas-staging.minestarters.com/news/qml-copper-discovery-at-mt-chalmers--fe382ad6-14fe-48fd-abdf-bcef62bdf4fa#fact-drill-facts-23)

Mt Chalmers West · gold

Historical result

Needs review: historical\_restatement

#### Identity

- Hole ID: 26MCRD002
- Project: Mt Chalmers West
- Commodity: gold
- Region: australia\_qld
- Reported Region: australia\_qld
- Ticker: QML

#### Geometry

- Grade: 0.11
- Grade Unit: g/t
- Intercept: 1 m
- From: 160 m
- To: 161 m
- Hole Depth: 211.5 m
- Intercept Depth: 160 m

#### Classification

- Deposit Type: vms
- Program: exploration
- Sample Type: drill
- Group ID: 26MCRD002:160-161
- Mining Method: unknown

#### Location

- Easting: 260013
- Northing: 7421420
- CRS: UTM
- Elevation: 125.3 m
- Azimuth: 240 °
- Dip: -75.1 °
- Loc. Confidence: high
- Loc. Source: document

#### QA/QC

- Laboratory: ALS Brisbane
- QA/QC Disclosed: Yes
- QP Signed: Yes

#### Deleterious

- Deleterious Flag: No

#### Compositing

- Cutoff Grade: 0.2
- Cutoff Unit: % Cu
- Dilution Disclosed: Yes
- Max Dilution: 2 m

#### Review

- Needs Review: Yes
- Review Reason: historical\_restatement
- Interp. Status: scored
- Historical: Yes

#### Dates

- Event date: 2026-10-11T00:00:00.000Z

Reasoning: This previously reported sub-interval shows a very low gold grade over a very narrow width, contributing little new information.

- Positive factor: QA/QC procedures disclosed

- Positive factor: Compositing parameters transparent

- Negative factor: Very low gold grade

- Negative factor: Very narrow intercept length \(1m\)

- Negative factor: Result is previously reported, low novelty

Evidence · table

> 0.11

Context: 1

#### Tags used in scoring

**Nearology Play**

Polarity: neutral

Definition: Value premise rests on proximity to a known deposit rather than own results.

Why it applies: proximity is offered as the value premise: "1 A N N O U N C E M E N T QMINES DISCOVERS COPPER SULPHIDES 180M BEYOND MT CHALMERS RESOURCE HIGHLIGHTS • New Copper Dis"

#### Rejected tags

**Stale Data Re-release** — Rejected; excluded from scoring

Polarity: negative

Definition: Historical results re-announced with no new assays or reinterpretation — low genuine novelty.

Reason: The intercept is explicitly marked as 'Previously reported' in the table.

Evidence · table

> Previously reported

Context: 26MCRD002

**QA/QC Disclosed** — Rejected; excluded from scoring

Polarity: positive

Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\).

Reason: The JORC table details internal QA/QC review by QMines technical personnel and the Competent Person.

Evidence · text

> Drilling, logging, sampling, assay and QAQC data were internally reviewed by QMines technical personnel and the Competent Person.

**Compositing Transparent** — Rejected; excluded from scoring

Polarity: positive

Definition: Cut-off grade and internal dilution rules are clearly stated for reported intervals.

Reason: The table specifies a 0.20% Cu lower cut off and maximum 2m internal dilution for the reported intercepts.

Evidence · text

> 0.20% Cu lower cut off, maximum 2m internal dilution.

### 26MCRD002

[Link to this fact](https://atlas-staging.minestarters.com/news/qml-copper-discovery-at-mt-chalmers--fe382ad6-14fe-48fd-abdf-bcef62bdf4fa#fact-drill-facts-24)

Mt Chalmers West · zinc

Historical result

Needs review: historical\_restatement

#### Identity

- Hole ID: 26MCRD002
- Project: Mt Chalmers West
- Commodity: zinc
- Region: australia\_qld
- Reported Region: australia\_qld
- Ticker: QML

#### Geometry

- Grade: 0.01
- Grade Unit: %
- Intercept: 1 m
- From: 160 m
- To: 161 m
- Hole Depth: 211.5 m
- Intercept Depth: 160 m

#### Classification

- Deposit Type: vms
- Program: exploration
- Sample Type: drill
- Group ID: 26MCRD002:160-161
- Mining Method: unknown

#### Location

- Easting: 260013
- Northing: 7421420
- CRS: UTM
- Elevation: 125.3 m
- Azimuth: 240 °
- Dip: -75.1 °
- Loc. Confidence: high
- Loc. Source: document

#### QA/QC

- Laboratory: ALS Brisbane
- QA/QC Disclosed: Yes
- QP Signed: Yes

#### Deleterious

- Deleterious Flag: No

#### Compositing

- Cutoff Grade: 0.2
- Cutoff Unit: % Cu
- Dilution Disclosed: Yes
- Max Dilution: 2 m

#### Review

- Needs Review: Yes
- Review Reason: historical\_restatement
- Interp. Status: scored
- Historical: Yes

#### Dates

- Event date: 2026-10-11T00:00:00.000Z

Reasoning: This previously reported sub-interval shows a very low zinc grade over a very narrow width, contributing little new information.

- Positive factor: QA/QC procedures disclosed

- Positive factor: Compositing parameters transparent

- Negative factor: Very low zinc grade

- Negative factor: Very narrow intercept length \(1m\)

- Negative factor: Result is previously reported, low novelty

Evidence · table

> 0.01

Context: 1

#### Tags used in scoring

**Nearology Play**

Polarity: neutral

Definition: Value premise rests on proximity to a known deposit rather than own results.

Why it applies: proximity is offered as the value premise: "1 A N N O U N C E M E N T QMINES DISCOVERS COPPER SULPHIDES 180M BEYOND MT CHALMERS RESOURCE HIGHLIGHTS • New Copper Dis"

#### Rejected tags

**Stale Data Re-release** — Rejected; excluded from scoring

Polarity: negative

Definition: Historical results re-announced with no new assays or reinterpretation — low genuine novelty.

Reason: The intercept is explicitly marked as 'Previously reported' in the table.

Evidence · table

> Previously reported

Context: 26MCRD002

**QA/QC Disclosed** — Rejected; excluded from scoring

Polarity: positive

Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\).

Reason: The JORC table details internal QA/QC review by QMines technical personnel and the Competent Person.

Evidence · text

> Drilling, logging, sampling, assay and QAQC data were internally reviewed by QMines technical personnel and the Competent Person.

**Compositing Transparent** — Rejected; excluded from scoring

Polarity: positive

Definition: Cut-off grade and internal dilution rules are clearly stated for reported intervals.

Reason: The table specifies a 0.20% Cu lower cut off and maximum 2m internal dilution for the reported intercepts.

Evidence · text

> 0.20% Cu lower cut off, maximum 2m internal dilution.

### 26MCRD002

[Link to this fact](https://atlas-staging.minestarters.com/news/qml-copper-discovery-at-mt-chalmers--fe382ad6-14fe-48fd-abdf-bcef62bdf4fa#fact-drill-facts-25)

Mt Chalmers West · silver

Historical result

Needs review: historical\_restatement

#### Identity

- Hole ID: 26MCRD002
- Project: Mt Chalmers West
- Commodity: silver
- Region: australia\_qld
- Reported Region: australia\_qld
- Ticker: QML

#### Geometry

- Grade: 2.1
- Grade Unit: g/t
- Intercept: 1 m
- From: 160 m
- To: 161 m
- Hole Depth: 211.5 m
- Intercept Depth: 160 m

#### Classification

- Deposit Type: vms
- Program: exploration
- Sample Type: drill
- Group ID: 26MCRD002:160-161
- Mining Method: unknown

#### Location

- Easting: 260013
- Northing: 7421420
- CRS: UTM
- Elevation: 125.3 m
- Azimuth: 240 °
- Dip: -75.1 °
- Loc. Confidence: high
- Loc. Source: document

#### QA/QC

- Laboratory: ALS Brisbane
- QA/QC Disclosed: Yes
- QP Signed: Yes

#### Deleterious

- Deleterious Flag: No

#### Compositing

- Cutoff Grade: 0.2
- Cutoff Unit: % Cu
- Dilution Disclosed: Yes
- Max Dilution: 2 m

#### Review

- Needs Review: Yes
- Review Reason: historical\_restatement
- Interp. Status: scored
- Historical: Yes

#### Dates

- Event date: 2026-10-11T00:00:00.000Z

Reasoning: This previously reported sub-interval shows a very low silver grade over a very narrow width, contributing little new information.

- Positive factor: QA/QC procedures disclosed

- Positive factor: Compositing parameters transparent

- Negative factor: Very low silver grade

- Negative factor: Very narrow intercept length \(1m\)

- Negative factor: Result is previously reported, low novelty

Evidence · table

> 2.1

Context: 1

#### Tags used in scoring

**Nearology Play**

Polarity: neutral

Definition: Value premise rests on proximity to a known deposit rather than own results.

Why it applies: proximity is offered as the value premise: "1 A N N O U N C E M E N T QMINES DISCOVERS COPPER SULPHIDES 180M BEYOND MT CHALMERS RESOURCE HIGHLIGHTS • New Copper Dis"

#### Rejected tags

**Stale Data Re-release** — Rejected; excluded from scoring

Polarity: negative

Definition: Historical results re-announced with no new assays or reinterpretation — low genuine novelty.

Reason: The intercept is explicitly marked as 'Previously reported' in the table.

Evidence · table

> Previously reported

Context: 26MCRD002

**QA/QC Disclosed** — Rejected; excluded from scoring

Polarity: positive

Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\).

Reason: The JORC table details internal QA/QC review by QMines technical personnel and the Competent Person.

Evidence · text

> Drilling, logging, sampling, assay and QAQC data were internally reviewed by QMines technical personnel and the Competent Person.

**Compositing Transparent** — Rejected; excluded from scoring

Polarity: positive

Definition: Cut-off grade and internal dilution rules are clearly stated for reported intervals.

Reason: The table specifies a 0.20% Cu lower cut off and maximum 2m internal dilution for the reported intercepts.

Evidence · text

> 0.20% Cu lower cut off, maximum 2m internal dilution.

### 26MCRD002

[Link to this fact](https://atlas-staging.minestarters.com/news/qml-copper-discovery-at-mt-chalmers--fe382ad6-14fe-48fd-abdf-bcef62bdf4fa#fact-drill-facts-26)

Mt Chalmers West · copper

Historical result

Needs review: historical\_restatement

#### Identity

- Hole ID: 26MCRD002
- Project: Mt Chalmers West
- Commodity: copper
- Region: australia\_qld
- Reported Region: australia\_qld
- Ticker: QML

#### Geometry

- Grade: 0.55
- Grade Unit: %
- Intercept: 1 m
- From: 178 m
- To: 179 m
- Hole Depth: 211.5 m
- Intercept Depth: 178 m

#### Classification

- Deposit Type: vms
- Program: exploration
- Sample Type: drill
- Group ID: 26MCRD002:178-179
- Mining Method: unknown

#### Location

- Easting: 260013
- Northing: 7421420
- CRS: UTM
- Elevation: 125.3 m
- Azimuth: 240 °
- Dip: -75.1 °
- Loc. Confidence: high
- Loc. Source: document

#### QA/QC

- Laboratory: ALS Brisbane
- QA/QC Disclosed: Yes
- QP Signed: Yes

#### Deleterious

- Deleterious Flag: No

#### Compositing

- Cutoff Grade: 0.2
- Cutoff Unit: % Cu
- Dilution Disclosed: Yes
- Max Dilution: 2 m

#### Review

- Needs Review: Yes
- Review Reason: historical\_restatement
- Interp. Status: scored
- Historical: Yes

#### Dates

- Event date: 2026-10-11T00:00:00.000Z

Reasoning: This previously reported sub-interval shows a moderate copper grade over a very narrow width, contributing little new information.

- Positive factor: QA/QC procedures disclosed

- Positive factor: Compositing parameters transparent

- Negative factor: Very narrow intercept length \(1m\)

- Negative factor: Result is previously reported, low novelty

Evidence · table

> 0.55

Context: 1

#### Tags used in scoring

**Nearology Play**

Polarity: neutral

Definition: Value premise rests on proximity to a known deposit rather than own results.

Why it applies: proximity is offered as the value premise: "1 A N N O U N C E M E N T QMINES DISCOVERS COPPER SULPHIDES 180M BEYOND MT CHALMERS RESOURCE HIGHLIGHTS • New Copper Dis"

#### Rejected tags

**Stale Data Re-release** — Rejected; excluded from scoring

Polarity: negative

Definition: Historical results re-announced with no new assays or reinterpretation — low genuine novelty.

Reason: The intercept is explicitly marked as 'Previously reported' in the table.

Evidence · table

> Previously reported

Context: 26MCRD002

**QA/QC Disclosed** — Rejected; excluded from scoring

Polarity: positive

Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\).

Reason: The JORC table details internal QA/QC review by QMines technical personnel and the Competent Person.

Evidence · text

> Drilling, logging, sampling, assay and QAQC data were internally reviewed by QMines technical personnel and the Competent Person.

**Compositing Transparent** — Rejected; excluded from scoring

Polarity: positive

Definition: Cut-off grade and internal dilution rules are clearly stated for reported intervals.

Reason: The table specifies a 0.20% Cu lower cut off and maximum 2m internal dilution for the reported intercepts.

Evidence · text

> 0.20% Cu lower cut off, maximum 2m internal dilution.

### 26MCRD002

[Link to this fact](https://atlas-staging.minestarters.com/news/qml-copper-discovery-at-mt-chalmers--fe382ad6-14fe-48fd-abdf-bcef62bdf4fa#fact-drill-facts-27)

Mt Chalmers West · gold

Historical result

Needs review: historical\_restatement

#### Identity

- Hole ID: 26MCRD002
- Project: Mt Chalmers West
- Commodity: gold
- Region: australia\_qld
- Reported Region: australia\_qld
- Ticker: QML

#### Geometry

- Grade: 0.06
- Grade Unit: g/t
- Intercept: 1 m
- From: 178 m
- To: 179 m
- Hole Depth: 211.5 m
- Intercept Depth: 178 m

#### Classification

- Deposit Type: vms
- Program: exploration
- Sample Type: drill
- Group ID: 26MCRD002:178-179
- Mining Method: unknown

#### Location

- Easting: 260013
- Northing: 7421420
- CRS: UTM
- Elevation: 125.3 m
- Azimuth: 240 °
- Dip: -75.1 °
- Loc. Confidence: high
- Loc. Source: document

#### QA/QC

- Laboratory: ALS Brisbane
- QA/QC Disclosed: Yes
- QP Signed: Yes

#### Deleterious

- Deleterious Flag: No

#### Compositing

- Cutoff Grade: 0.2
- Cutoff Unit: % Cu
- Dilution Disclosed: Yes
- Max Dilution: 2 m

#### Review

- Needs Review: Yes
- Review Reason: historical\_restatement
- Interp. Status: scored
- Historical: Yes

#### Dates

- Event date: 2026-10-11T00:00:00.000Z

Reasoning: This previously reported sub-interval shows a very low gold grade over a very narrow width, contributing little new information.

- Positive factor: QA/QC procedures disclosed

- Positive factor: Compositing parameters transparent

- Negative factor: Very low gold grade

- Negative factor: Very narrow intercept length \(1m\)

- Negative factor: Result is previously reported, low novelty

Evidence · table

> 0.06

Context: 1

#### Tags used in scoring

**Nearology Play**

Polarity: neutral

Definition: Value premise rests on proximity to a known deposit rather than own results.

Why it applies: proximity is offered as the value premise: "1 A N N O U N C E M E N T QMINES DISCOVERS COPPER SULPHIDES 180M BEYOND MT CHALMERS RESOURCE HIGHLIGHTS • New Copper Dis"

#### Rejected tags

**Stale Data Re-release** — Rejected; excluded from scoring

Polarity: negative

Definition: Historical results re-announced with no new assays or reinterpretation — low genuine novelty.

Reason: The intercept is explicitly marked as 'Previously reported' in the table.

Evidence · table

> Previously reported

Context: 26MCRD002

**QA/QC Disclosed** — Rejected; excluded from scoring

Polarity: positive

Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\).

Reason: The JORC table details internal QA/QC review by QMines technical personnel and the Competent Person.

Evidence · text

> Drilling, logging, sampling, assay and QAQC data were internally reviewed by QMines technical personnel and the Competent Person.

**Compositing Transparent** — Rejected; excluded from scoring

Polarity: positive

Definition: Cut-off grade and internal dilution rules are clearly stated for reported intervals.

Reason: The table specifies a 0.20% Cu lower cut off and maximum 2m internal dilution for the reported intercepts.

Evidence · text

> 0.20% Cu lower cut off, maximum 2m internal dilution.

### 26MCRD002

[Link to this fact](https://atlas-staging.minestarters.com/news/qml-copper-discovery-at-mt-chalmers--fe382ad6-14fe-48fd-abdf-bcef62bdf4fa#fact-drill-facts-28)

Mt Chalmers West · zinc

Historical result

Needs review: historical\_restatement

#### Identity

- Hole ID: 26MCRD002
- Project: Mt Chalmers West
- Commodity: zinc
- Region: australia\_qld
- Reported Region: australia\_qld
- Ticker: QML

#### Geometry

- Grade: 0.04
- Grade Unit: %
- Intercept: 1 m
- From: 178 m
- To: 179 m
- Hole Depth: 211.5 m
- Intercept Depth: 178 m

#### Classification

- Deposit Type: vms
- Program: exploration
- Sample Type: drill
- Group ID: 26MCRD002:178-179
- Mining Method: unknown

#### Location

- Easting: 260013
- Northing: 7421420
- CRS: UTM
- Elevation: 125.3 m
- Azimuth: 240 °
- Dip: -75.1 °
- Loc. Confidence: high
- Loc. Source: document

#### QA/QC

- Laboratory: ALS Brisbane
- QA/QC Disclosed: Yes
- QP Signed: Yes

#### Deleterious

- Deleterious Flag: No

#### Compositing

- Cutoff Grade: 0.2
- Cutoff Unit: % Cu
- Dilution Disclosed: Yes
- Max Dilution: 2 m

#### Review

- Needs Review: Yes
- Review Reason: historical\_restatement
- Interp. Status: scored
- Historical: Yes

#### Dates

- Event date: 2026-10-11T00:00:00.000Z

Reasoning: This previously reported sub-interval shows a very low zinc grade over a very narrow width, contributing little new information.

- Positive factor: QA/QC procedures disclosed

- Positive factor: Compositing parameters transparent

- Negative factor: Very low zinc grade

- Negative factor: Very narrow intercept length \(1m\)

- Negative factor: Result is previously reported, low novelty

Evidence · table

> 0.04

Context: 1

#### Tags used in scoring

**Nearology Play**

Polarity: neutral

Definition: Value premise rests on proximity to a known deposit rather than own results.

Why it applies: proximity is offered as the value premise: "1 A N N O U N C E M E N T QMINES DISCOVERS COPPER SULPHIDES 180M BEYOND MT CHALMERS RESOURCE HIGHLIGHTS • New Copper Dis"

#### Rejected tags

**Stale Data Re-release** — Rejected; excluded from scoring

Polarity: negative

Definition: Historical results re-announced with no new assays or reinterpretation — low genuine novelty.

Reason: The intercept is explicitly marked as 'Previously reported' in the table.

Evidence · table

> Previously reported

Context: 26MCRD002

**QA/QC Disclosed** — Rejected; excluded from scoring

Polarity: positive

Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\).

Reason: The JORC table details internal QA/QC review by QMines technical personnel and the Competent Person.

Evidence · text

> Drilling, logging, sampling, assay and QAQC data were internally reviewed by QMines technical personnel and the Competent Person.

**Compositing Transparent** — Rejected; excluded from scoring

Polarity: positive

Definition: Cut-off grade and internal dilution rules are clearly stated for reported intervals.

Reason: The table specifies a 0.20% Cu lower cut off and maximum 2m internal dilution for the reported intercepts.

Evidence · text

> 0.20% Cu lower cut off, maximum 2m internal dilution.

### 26MCRD002

[Link to this fact](https://atlas-staging.minestarters.com/news/qml-copper-discovery-at-mt-chalmers--fe382ad6-14fe-48fd-abdf-bcef62bdf4fa#fact-drill-facts-29)

Mt Chalmers West · silver

Historical result

Needs review: historical\_restatement

#### Identity

- Hole ID: 26MCRD002
- Project: Mt Chalmers West
- Commodity: silver
- Region: australia\_qld
- Reported Region: australia\_qld
- Ticker: QML

#### Geometry

- Grade: 0.8
- Grade Unit: g/t
- Intercept: 1 m
- From: 178 m
- To: 179 m
- Hole Depth: 211.5 m
- Intercept Depth: 178 m

#### Classification

- Deposit Type: vms
- Program: exploration
- Sample Type: drill
- Group ID: 26MCRD002:178-179
- Mining Method: unknown

#### Location

- Easting: 260013
- Northing: 7421420
- CRS: UTM
- Elevation: 125.3 m
- Azimuth: 240 °
- Dip: -75.1 °
- Loc. Confidence: high
- Loc. Source: document

#### QA/QC

- Laboratory: ALS Brisbane
- QA/QC Disclosed: Yes
- QP Signed: Yes

#### Deleterious

- Deleterious Flag: No

#### Compositing

- Cutoff Grade: 0.2
- Cutoff Unit: % Cu
- Dilution Disclosed: Yes
- Max Dilution: 2 m

#### Review

- Needs Review: Yes
- Review Reason: historical\_restatement
- Interp. Status: scored
- Historical: Yes

#### Dates

- Event date: 2026-10-11T00:00:00.000Z

Reasoning: This previously reported sub-interval shows a very low silver grade over a very narrow width, contributing little new information.

- Positive factor: QA/QC procedures disclosed

- Positive factor: Compositing parameters transparent

- Negative factor: Very low silver grade

- Negative factor: Very narrow intercept length \(1m\)

- Negative factor: Result is previously reported, low novelty

Evidence · table

> 0.8

Context: 1

#### Tags used in scoring

**Nearology Play**

Polarity: neutral

Definition: Value premise rests on proximity to a known deposit rather than own results.

Why it applies: proximity is offered as the value premise: "1 A N N O U N C E M E N T QMINES DISCOVERS COPPER SULPHIDES 180M BEYOND MT CHALMERS RESOURCE HIGHLIGHTS • New Copper Dis"

#### Rejected tags

**Stale Data Re-release** — Rejected; excluded from scoring

Polarity: negative

Definition: Historical results re-announced with no new assays or reinterpretation — low genuine novelty.

Reason: The intercept is explicitly marked as 'Previously reported' in the table.

Evidence · table

> Previously reported

Context: 26MCRD002

**QA/QC Disclosed** — Rejected; excluded from scoring

Polarity: positive

Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\).

Reason: The JORC table details internal QA/QC review by QMines technical personnel and the Competent Person.

Evidence · text

> Drilling, logging, sampling, assay and QAQC data were internally reviewed by QMines technical personnel and the Competent Person.

**Compositing Transparent** — Rejected; excluded from scoring

Polarity: positive

Definition: Cut-off grade and internal dilution rules are clearly stated for reported intervals.

Reason: The table specifies a 0.20% Cu lower cut off and maximum 2m internal dilution for the reported intercepts.

Evidence · text

> 0.20% Cu lower cut off, maximum 2m internal dilution.

### 26MCDD003

[Link to this fact](https://atlas-staging.minestarters.com/news/qml-copper-discovery-at-mt-chalmers--fe382ad6-14fe-48fd-abdf-bcef62bdf4fa#fact-drill-facts-30)

Mt Chalmers West · copper

Historical result

Needs review: historical\_restatement

#### Identity

- Hole ID: 26MCDD003
- Project: Mt Chalmers West
- Commodity: copper
- Region: australia\_qld
- Reported Region: australia\_qld
- Ticker: QML

#### Geometry

- Grade: 1
- Grade Unit: %
- Intercept: 4.3 m
- From: 20 m
- To: 24.5 m
- Hole Depth: 102 m
- Intercept Depth: 20 m

#### Classification

- Deposit Type: vms
- Program: exploration
- Sample Type: drill
- Group ID: 26MCDD003:20-24.5
- Mining Method: unknown

#### Location

- Easting: 259733
- Northing: 7421242
- CRS: UTM
- Elevation: 96 m
- Azimuth: 100 °
- Dip: -60 °
- Loc. Confidence: high
- Loc. Source: document

#### QA/QC

- Laboratory: ALS Brisbane
- QA/QC Disclosed: Yes
- QP Signed: Yes

#### Deleterious

- Deleterious Flag: No

#### Compositing

- Cutoff Grade: 0.2
- Cutoff Unit: % Cu
- Dilution Disclosed: Yes
- Max Dilution: 2 m

#### Review

- Needs Review: Yes
- Review Reason: historical\_restatement
- Interp. Status: scored
- Historical: Yes

#### Dates

- Event date: 2026-10-11T00:00:00.000Z

Reasoning: This previously reported copper intercept shows a moderate grade over a narrow width, but has low novelty.

- Positive factor: Moderate copper grade for VMS deposit type

- Positive factor: QA/QC procedures disclosed

- Positive factor: Compositing parameters transparent

- Negative factor: Result is previously reported, low novelty

Evidence · table

> 1.0

Context: 4.3

#### Tags used in scoring

**Nearology Play**

Polarity: neutral

Definition: Value premise rests on proximity to a known deposit rather than own results.

Why it applies: proximity is offered as the value premise: "1 A N N O U N C E M E N T QMINES DISCOVERS COPPER SULPHIDES 180M BEYOND MT CHALMERS RESOURCE HIGHLIGHTS • New Copper Dis"

#### Rejected tags

**Stale Data Re-release** — Rejected; excluded from scoring

Polarity: negative

Definition: Historical results re-announced with no new assays or reinterpretation — low genuine novelty.

Reason: The intercept is explicitly marked as 'Previously reported' in the table.

Evidence · table

> Previously reported

Context: 26MCDD003

**QA/QC Disclosed** — Rejected; excluded from scoring

Polarity: positive

Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\).

Reason: The JORC table details internal QA/QC review by QMines technical personnel and the Competent Person.

Evidence · text

> Drilling, logging, sampling, assay and QAQC data were internally reviewed by QMines technical personnel and the Competent Person.

**Compositing Transparent** — Rejected; excluded from scoring

Polarity: positive

Definition: Cut-off grade and internal dilution rules are clearly stated for reported intervals.

Reason: The table specifies a 0.20% Cu lower cut off and maximum 2m internal dilution for the reported intercepts.

Evidence · text

> 0.20% Cu lower cut off, maximum 2m internal dilution.

### 26MCDD003

[Link to this fact](https://atlas-staging.minestarters.com/news/qml-copper-discovery-at-mt-chalmers--fe382ad6-14fe-48fd-abdf-bcef62bdf4fa#fact-drill-facts-31)

Mt Chalmers West · gold

Historical result

Needs review: historical\_restatement

#### Identity

- Hole ID: 26MCDD003
- Project: Mt Chalmers West
- Commodity: gold
- Region: australia\_qld
- Reported Region: australia\_qld
- Ticker: QML

#### Geometry

- Grade: 1.7
- Grade Unit: g/t
- Intercept: 4.3 m
- From: 20 m
- To: 24.5 m
- Hole Depth: 102 m
- Intercept Depth: 20 m

#### Classification

- Deposit Type: vms
- Program: exploration
- Sample Type: drill
- Group ID: 26MCDD003:20-24.5
- Mining Method: unknown

#### Location

- Easting: 259733
- Northing: 7421242
- CRS: UTM
- Elevation: 96 m
- Azimuth: 100 °
- Dip: -60 °
- Loc. Confidence: high
- Loc. Source: document

#### QA/QC

- Laboratory: ALS Brisbane
- QA/QC Disclosed: Yes
- QP Signed: Yes

#### Deleterious

- Deleterious Flag: No

#### Compositing

- Cutoff Grade: 0.2
- Cutoff Unit: % Cu
- Dilution Disclosed: Yes
- Max Dilution: 2 m

#### Review

- Needs Review: Yes
- Review Reason: historical\_restatement
- Interp. Status: scored
- Historical: Yes

#### Dates

- Event date: 2026-10-11T00:00:00.000Z

Reasoning: This previously reported gold intercept shows a moderate grade over a narrow width, but has low novelty.

- Positive factor: Moderate gold grade for VMS deposit type

- Positive factor: QA/QC procedures disclosed

- Positive factor: Compositing parameters transparent

- Negative factor: Result is previously reported, low novelty

Evidence · table

> 1.7

Context: 4.3

#### Tags used in scoring

**Nearology Play**

Polarity: neutral

Definition: Value premise rests on proximity to a known deposit rather than own results.

Why it applies: proximity is offered as the value premise: "1 A N N O U N C E M E N T QMINES DISCOVERS COPPER SULPHIDES 180M BEYOND MT CHALMERS RESOURCE HIGHLIGHTS • New Copper Dis"

#### Rejected tags

**Stale Data Re-release** — Rejected; excluded from scoring

Polarity: negative

Definition: Historical results re-announced with no new assays or reinterpretation — low genuine novelty.

Reason: The intercept is explicitly marked as 'Previously reported' in the table.

Evidence · table

> Previously reported

Context: 26MCDD003

**QA/QC Disclosed** — Rejected; excluded from scoring

Polarity: positive

Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\).

Reason: The JORC table details internal QA/QC review by QMines technical personnel and the Competent Person.

Evidence · text

> Drilling, logging, sampling, assay and QAQC data were internally reviewed by QMines technical personnel and the Competent Person.

**Compositing Transparent** — Rejected; excluded from scoring

Polarity: positive

Definition: Cut-off grade and internal dilution rules are clearly stated for reported intervals.

Reason: The table specifies a 0.20% Cu lower cut off and maximum 2m internal dilution for the reported intercepts.

Evidence · text

> 0.20% Cu lower cut off, maximum 2m internal dilution.

### 26MCDD003

[Link to this fact](https://atlas-staging.minestarters.com/news/qml-copper-discovery-at-mt-chalmers--fe382ad6-14fe-48fd-abdf-bcef62bdf4fa#fact-drill-facts-32)

Mt Chalmers West · zinc

Historical result

Needs review: historical\_restatement

#### Identity

- Hole ID: 26MCDD003
- Project: Mt Chalmers West
- Commodity: zinc
- Region: australia\_qld
- Reported Region: australia\_qld
- Ticker: QML

#### Geometry

- Grade: 8.9
- Grade Unit: %
- Intercept: 4.3 m
- From: 20 m
- To: 24.5 m
- Hole Depth: 102 m
- Intercept Depth: 20 m

#### Classification

- Deposit Type: vms
- Program: exploration
- Sample Type: drill
- Group ID: 26MCDD003:20-24.5
- Mining Method: unknown

#### Location

- Easting: 259733
- Northing: 7421242
- CRS: UTM
- Elevation: 96 m
- Azimuth: 100 °
- Dip: -60 °
- Loc. Confidence: high
- Loc. Source: document

#### QA/QC

- Laboratory: ALS Brisbane
- QA/QC Disclosed: Yes
- QP Signed: Yes

#### Deleterious

- Deleterious Flag: No

#### Compositing

- Cutoff Grade: 0.2
- Cutoff Unit: % Cu
- Dilution Disclosed: Yes
- Max Dilution: 2 m

#### Review

- Needs Review: Yes
- Review Reason: historical\_restatement
- Interp. Status: scored
- Historical: Yes

#### Dates

- Event date: 2026-10-11T00:00:00.000Z

Reasoning: This previously reported zinc intercept shows a moderate grade over a narrow width, but has low novelty.

- Positive factor: Moderate zinc grade for VMS deposit type

- Positive factor: QA/QC procedures disclosed

- Positive factor: Compositing parameters transparent

- Negative factor: Result is previously reported, low novelty

Evidence · table

> 8.9

Context: 4.3

#### Tags used in scoring

**Nearology Play**

Polarity: neutral

Definition: Value premise rests on proximity to a known deposit rather than own results.

Why it applies: proximity is offered as the value premise: "1 A N N O U N C E M E N T QMINES DISCOVERS COPPER SULPHIDES 180M BEYOND MT CHALMERS RESOURCE HIGHLIGHTS • New Copper Dis"

#### Rejected tags

**Stale Data Re-release** — Rejected; excluded from scoring

Polarity: negative

Definition: Historical results re-announced with no new assays or reinterpretation — low genuine novelty.

Reason: The intercept is explicitly marked as 'Previously reported' in the table.

Evidence · table

> Previously reported

Context: 26MCDD003

**QA/QC Disclosed** — Rejected; excluded from scoring

Polarity: positive

Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\).

Reason: The JORC table details internal QA/QC review by QMines technical personnel and the Competent Person.

Evidence · text

> Drilling, logging, sampling, assay and QAQC data were internally reviewed by QMines technical personnel and the Competent Person.

**Compositing Transparent** — Rejected; excluded from scoring

Polarity: positive

Definition: Cut-off grade and internal dilution rules are clearly stated for reported intervals.

Reason: The table specifies a 0.20% Cu lower cut off and maximum 2m internal dilution for the reported intercepts.

Evidence · text

> 0.20% Cu lower cut off, maximum 2m internal dilution.

### 26MCDD003

[Link to this fact](https://atlas-staging.minestarters.com/news/qml-copper-discovery-at-mt-chalmers--fe382ad6-14fe-48fd-abdf-bcef62bdf4fa#fact-drill-facts-33)

Mt Chalmers West · lead

Historical result

Needs review: historical\_restatement

#### Identity

- Hole ID: 26MCDD003
- Project: Mt Chalmers West
- Commodity: lead
- Region: australia\_qld
- Reported Region: australia\_qld
- Ticker: QML

#### Geometry

- Grade: 3.7
- Grade Unit: %
- Intercept: 4.3 m
- From: 20 m
- To: 24.5 m
- Hole Depth: 102 m
- Intercept Depth: 20 m

#### Classification

- Deposit Type: vms
- Program: exploration
- Sample Type: drill
- Group ID: 26MCDD003:20-24.5
- Mining Method: unknown

#### Location

- Easting: 259733
- Northing: 7421242
- CRS: UTM
- Elevation: 96 m
- Azimuth: 100 °
- Dip: -60 °
- Loc. Confidence: high
- Loc. Source: document

#### QA/QC

- Laboratory: ALS Brisbane
- QA/QC Disclosed: Yes
- QP Signed: Yes

#### Deleterious

- Deleterious Flag: No

#### Compositing

- Cutoff Grade: 0.2
- Cutoff Unit: % Cu
- Dilution Disclosed: Yes
- Max Dilution: 2 m

#### Review

- Needs Review: Yes
- Review Reason: historical\_restatement
- Interp. Status: scored
- Historical: Yes

#### Dates

- Event date: 2026-10-11T00:00:00.000Z

Reasoning: This previously reported lead intercept shows a moderate grade over a narrow width, but has low novelty.

- Positive factor: Moderate lead grade for VMS deposit type

- Positive factor: QA/QC procedures disclosed

- Positive factor: Compositing parameters transparent

- Negative factor: Result is previously reported, low novelty

Evidence · table

> 3.7

Context: 4.3

#### Tags used in scoring

**Nearology Play**

Polarity: neutral

Definition: Value premise rests on proximity to a known deposit rather than own results.

Why it applies: proximity is offered as the value premise: "1 A N N O U N C E M E N T QMINES DISCOVERS COPPER SULPHIDES 180M BEYOND MT CHALMERS RESOURCE HIGHLIGHTS • New Copper Dis"

#### Rejected tags

**Stale Data Re-release** — Rejected; excluded from scoring

Polarity: negative

Definition: Historical results re-announced with no new assays or reinterpretation — low genuine novelty.

Reason: The intercept is explicitly marked as 'Previously reported' in the table.

Evidence · table

> Previously reported

Context: 26MCDD003

**QA/QC Disclosed** — Rejected; excluded from scoring

Polarity: positive

Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\).

Reason: The JORC table details internal QA/QC review by QMines technical personnel and the Competent Person.

Evidence · text

> Drilling, logging, sampling, assay and QAQC data were internally reviewed by QMines technical personnel and the Competent Person.

**Compositing Transparent** — Rejected; excluded from scoring

Polarity: positive

Definition: Cut-off grade and internal dilution rules are clearly stated for reported intervals.

Reason: The table specifies a 0.20% Cu lower cut off and maximum 2m internal dilution for the reported intercepts.

Evidence · text

> 0.20% Cu lower cut off, maximum 2m internal dilution.

### 26MCDD003

[Link to this fact](https://atlas-staging.minestarters.com/news/qml-copper-discovery-at-mt-chalmers--fe382ad6-14fe-48fd-abdf-bcef62bdf4fa#fact-drill-facts-34)

Mt Chalmers West · silver

Historical result

Needs review: historical\_restatement

#### Identity

- Hole ID: 26MCDD003
- Project: Mt Chalmers West
- Commodity: silver
- Region: australia\_qld
- Reported Region: australia\_qld
- Ticker: QML

#### Geometry

- Grade: 57
- Grade Unit: g/t
- Intercept: 4.3 m
- From: 20 m
- To: 24.5 m
- Hole Depth: 102 m
- Intercept Depth: 20 m

#### Classification

- Deposit Type: vms
- Program: exploration
- Sample Type: drill
- Group ID: 26MCDD003:20-24.5
- Mining Method: unknown

#### Location

- Easting: 259733
- Northing: 7421242
- CRS: UTM
- Elevation: 96 m
- Azimuth: 100 °
- Dip: -60 °
- Loc. Confidence: high
- Loc. Source: document

#### QA/QC

- Laboratory: ALS Brisbane
- QA/QC Disclosed: Yes
- QP Signed: Yes

#### Deleterious

- Deleterious Flag: No

#### Compositing

- Cutoff Grade: 0.2
- Cutoff Unit: % Cu
- Dilution Disclosed: Yes
- Max Dilution: 2 m

#### Review

- Needs Review: Yes
- Review Reason: historical\_restatement
- Interp. Status: scored
- Historical: Yes

#### Dates

- Event date: 2026-10-11T00:00:00.000Z

Reasoning: This previously reported silver intercept shows a moderate grade over a narrow width, but has low novelty.

- Positive factor: Moderate silver grade for VMS deposit type

- Positive factor: QA/QC procedures disclosed

- Positive factor: Compositing parameters transparent

- Negative factor: Result is previously reported, low novelty

Evidence · table

> 57

Context: 4.3

#### Tags used in scoring

**Nearology Play**

Polarity: neutral

Definition: Value premise rests on proximity to a known deposit rather than own results.

Why it applies: proximity is offered as the value premise: "1 A N N O U N C E M E N T QMINES DISCOVERS COPPER SULPHIDES 180M BEYOND MT CHALMERS RESOURCE HIGHLIGHTS • New Copper Dis"

#### Rejected tags

**Stale Data Re-release** — Rejected; excluded from scoring

Polarity: negative

Definition: Historical results re-announced with no new assays or reinterpretation — low genuine novelty.

Reason: The intercept is explicitly marked as 'Previously reported' in the table.

Evidence · table

> Previously reported

Context: 26MCDD003

**QA/QC Disclosed** — Rejected; excluded from scoring

Polarity: positive

Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\).

Reason: The JORC table details internal QA/QC review by QMines technical personnel and the Competent Person.

Evidence · text

> Drilling, logging, sampling, assay and QAQC data were internally reviewed by QMines technical personnel and the Competent Person.

**Compositing Transparent** — Rejected; excluded from scoring

Polarity: positive

Definition: Cut-off grade and internal dilution rules are clearly stated for reported intervals.

Reason: The table specifies a 0.20% Cu lower cut off and maximum 2m internal dilution for the reported intercepts.

Evidence · text

> 0.20% Cu lower cut off, maximum 2m internal dilution.

### 26MCDD003

[Link to this fact](https://atlas-staging.minestarters.com/news/qml-copper-discovery-at-mt-chalmers--fe382ad6-14fe-48fd-abdf-bcef62bdf4fa#fact-drill-facts-35)

Mt Chalmers West · copper

Historical result

Needs review: historical\_restatement

#### Identity

- Hole ID: 26MCDD003
- Project: Mt Chalmers West
- Commodity: copper
- Region: australia\_qld
- Reported Region: australia\_qld
- Ticker: QML

#### Geometry

- Grade: 0.5
- Grade Unit: %
- Intercept: 5.5 m
- From: 28.5 m
- To: 34 m
- Hole Depth: 102 m
- Intercept Depth: 28.5 m

#### Classification

- Deposit Type: vms
- Program: exploration
- Sample Type: drill
- Group ID: 26MCDD003:28.5-34
- Mining Method: unknown

#### Location

- Easting: 259733
- Northing: 7421242
- CRS: UTM
- Elevation: 96 m
- Azimuth: 100 °
- Dip: -60 °
- Loc. Confidence: high
- Loc. Source: document

#### QA/QC

- Laboratory: ALS Brisbane
- QA/QC Disclosed: Yes
- QP Signed: Yes

#### Deleterious

- Deleterious Flag: No

#### Compositing

- Cutoff Grade: 0.2
- Cutoff Unit: % Cu
- Dilution Disclosed: Yes
- Max Dilution: 2 m

#### Review

- Needs Review: Yes
- Review Reason: historical\_restatement
- Interp. Status: scored
- Historical: Yes

#### Dates

- Event date: 2026-10-11T00:00:00.000Z

Reasoning: This previously reported copper intercept shows a moderate grade over a narrow width, but has low novelty.

- Positive factor: Moderate copper grade for VMS deposit type

- Positive factor: QA/QC procedures disclosed

- Positive factor: Compositing parameters transparent

- Negative factor: Result is previously reported, low novelty

Evidence · table

> 0.5

Context: 5.5

#### Tags used in scoring

**Nearology Play**

Polarity: neutral

Definition: Value premise rests on proximity to a known deposit rather than own results.

Why it applies: proximity is offered as the value premise: "1 A N N O U N C E M E N T QMINES DISCOVERS COPPER SULPHIDES 180M BEYOND MT CHALMERS RESOURCE HIGHLIGHTS • New Copper Dis"

#### Rejected tags

**Stale Data Re-release** — Rejected; excluded from scoring

Polarity: negative

Definition: Historical results re-announced with no new assays or reinterpretation — low genuine novelty.

Reason: The intercept is explicitly marked as 'Previously reported' in the table.

Evidence · table

> Previously reported

Context: 26MCDD003

**QA/QC Disclosed** — Rejected; excluded from scoring

Polarity: positive

Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\).

Reason: The JORC table details internal QA/QC review by QMines technical personnel and the Competent Person.

Evidence · text

> Drilling, logging, sampling, assay and QAQC data were internally reviewed by QMines technical personnel and the Competent Person.

**Compositing Transparent** — Rejected; excluded from scoring

Polarity: positive

Definition: Cut-off grade and internal dilution rules are clearly stated for reported intervals.

Reason: The table specifies a 0.20% Cu lower cut off and maximum 2m internal dilution for the reported intercepts.

Evidence · text

> 0.20% Cu lower cut off, maximum 2m internal dilution.

### 26MCDD003

[Link to this fact](https://atlas-staging.minestarters.com/news/qml-copper-discovery-at-mt-chalmers--fe382ad6-14fe-48fd-abdf-bcef62bdf4fa#fact-drill-facts-36)

Mt Chalmers West · gold

Historical result

Needs review: historical\_restatement

#### Identity

- Hole ID: 26MCDD003
- Project: Mt Chalmers West
- Commodity: gold
- Region: australia\_qld
- Reported Region: australia\_qld
- Ticker: QML

#### Geometry

- Grade: 2.5
- Grade Unit: g/t
- Intercept: 5.5 m
- From: 28.5 m
- To: 34 m
- Hole Depth: 102 m
- Intercept Depth: 28.5 m

#### Classification

- Deposit Type: vms
- Program: exploration
- Sample Type: drill
- Group ID: 26MCDD003:28.5-34
- Mining Method: unknown

#### Location

- Easting: 259733
- Northing: 7421242
- CRS: UTM
- Elevation: 96 m
- Azimuth: 100 °
- Dip: -60 °
- Loc. Confidence: high
- Loc. Source: document

#### QA/QC

- Laboratory: ALS Brisbane
- QA/QC Disclosed: Yes
- QP Signed: Yes

#### Deleterious

- Deleterious Flag: No

#### Compositing

- Cutoff Grade: 0.2
- Cutoff Unit: % Cu
- Dilution Disclosed: Yes
- Max Dilution: 2 m

#### Review

- Needs Review: Yes
- Review Reason: historical\_restatement
- Interp. Status: scored
- Historical: Yes

#### Dates

- Event date: 2026-10-11T00:00:00.000Z

Reasoning: This previously reported gold intercept shows a strong grade over a narrow width, but has low novelty.

- Positive factor: Strong gold grade for VMS deposit type

- Positive factor: QA/QC procedures disclosed

- Positive factor: Compositing parameters transparent

- Negative factor: Result is previously reported, low novelty

Evidence · table

> 2.5

Context: 5.5

#### Tags used in scoring

**Nearology Play**

Polarity: neutral

Definition: Value premise rests on proximity to a known deposit rather than own results.

Why it applies: proximity is offered as the value premise: "1 A N N O U N C E M E N T QMINES DISCOVERS COPPER SULPHIDES 180M BEYOND MT CHALMERS RESOURCE HIGHLIGHTS • New Copper Dis"

#### Rejected tags

**Stale Data Re-release** — Rejected; excluded from scoring

Polarity: negative

Definition: Historical results re-announced with no new assays or reinterpretation — low genuine novelty.

Reason: The intercept is explicitly marked as 'Previously reported' in the table.

Evidence · table

> Previously reported

Context: 26MCDD003

**QA/QC Disclosed** — Rejected; excluded from scoring

Polarity: positive

Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\).

Reason: The JORC table details internal QA/QC review by QMines technical personnel and the Competent Person.

Evidence · text

> Drilling, logging, sampling, assay and QAQC data were internally reviewed by QMines technical personnel and the Competent Person.

**Compositing Transparent** — Rejected; excluded from scoring

Polarity: positive

Definition: Cut-off grade and internal dilution rules are clearly stated for reported intervals.

Reason: The table specifies a 0.20% Cu lower cut off and maximum 2m internal dilution for the reported intercepts.

Evidence · text

> 0.20% Cu lower cut off, maximum 2m internal dilution.

### 26MCDD003

[Link to this fact](https://atlas-staging.minestarters.com/news/qml-copper-discovery-at-mt-chalmers--fe382ad6-14fe-48fd-abdf-bcef62bdf4fa#fact-drill-facts-37)

Mt Chalmers West · zinc

Historical result

Needs review: historical\_restatement

#### Identity

- Hole ID: 26MCDD003
- Project: Mt Chalmers West
- Commodity: zinc
- Region: australia\_qld
- Reported Region: australia\_qld
- Ticker: QML

#### Geometry

- Grade: 11.4
- Grade Unit: %
- Intercept: 5.5 m
- From: 28.5 m
- To: 34 m
- Hole Depth: 102 m
- Intercept Depth: 28.5 m

#### Classification

- Deposit Type: vms
- Program: exploration
- Sample Type: drill
- Group ID: 26MCDD003:28.5-34
- Mining Method: unknown

#### Location

- Easting: 259733
- Northing: 7421242
- CRS: UTM
- Elevation: 96 m
- Azimuth: 100 °
- Dip: -60 °
- Loc. Confidence: high
- Loc. Source: document

#### QA/QC

- Laboratory: ALS Brisbane
- QA/QC Disclosed: Yes
- QP Signed: Yes

#### Deleterious

- Deleterious Flag: No

#### Compositing

- Cutoff Grade: 0.2
- Cutoff Unit: % Cu
- Dilution Disclosed: Yes
- Max Dilution: 2 m

#### Review

- Needs Review: Yes
- Review Reason: historical\_restatement
- Interp. Status: scored
- Historical: Yes

#### Dates

- Event date: 2026-10-11T00:00:00.000Z

Reasoning: This previously reported zinc intercept shows a strong grade over a narrow width, but has low novelty.

- Positive factor: Strong zinc grade for VMS deposit type

- Positive factor: QA/QC procedures disclosed

- Positive factor: Compositing parameters transparent

- Negative factor: Result is previously reported, low novelty

Evidence · table

> 11.4

Context: 5.5

#### Tags used in scoring

**Nearology Play**

Polarity: neutral

Definition: Value premise rests on proximity to a known deposit rather than own results.

Why it applies: proximity is offered as the value premise: "1 A N N O U N C E M E N T QMINES DISCOVERS COPPER SULPHIDES 180M BEYOND MT CHALMERS RESOURCE HIGHLIGHTS • New Copper Dis"

#### Rejected tags

**Stale Data Re-release** — Rejected; excluded from scoring

Polarity: negative

Definition: Historical results re-announced with no new assays or reinterpretation — low genuine novelty.

Reason: The intercept is explicitly marked as 'Previously reported' in the table.

Evidence · table

> Previously reported

Context: 26MCDD003

**QA/QC Disclosed** — Rejected; excluded from scoring

Polarity: positive

Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\).

Reason: The JORC table details internal QA/QC review by QMines technical personnel and the Competent Person.

Evidence · text

> Drilling, logging, sampling, assay and QAQC data were internally reviewed by QMines technical personnel and the Competent Person.

**Compositing Transparent** — Rejected; excluded from scoring

Polarity: positive

Definition: Cut-off grade and internal dilution rules are clearly stated for reported intervals.

Reason: The table specifies a 0.20% Cu lower cut off and maximum 2m internal dilution for the reported intercepts.

Evidence · text

> 0.20% Cu lower cut off, maximum 2m internal dilution.

### 26MCDD003

[Link to this fact](https://atlas-staging.minestarters.com/news/qml-copper-discovery-at-mt-chalmers--fe382ad6-14fe-48fd-abdf-bcef62bdf4fa#fact-drill-facts-38)

Mt Chalmers West · lead

Historical result

Needs review: historical\_restatement

#### Identity

- Hole ID: 26MCDD003
- Project: Mt Chalmers West
- Commodity: lead
- Region: australia\_qld
- Reported Region: australia\_qld
- Ticker: QML

#### Geometry

- Grade: 4.7
- Grade Unit: %
- Intercept: 5.5 m
- From: 28.5 m
- To: 34 m
- Hole Depth: 102 m
- Intercept Depth: 28.5 m

#### Classification

- Deposit Type: vms
- Program: exploration
- Sample Type: drill
- Group ID: 26MCDD003:28.5-34
- Mining Method: unknown

#### Location

- Easting: 259733
- Northing: 7421242
- CRS: UTM
- Elevation: 96 m
- Azimuth: 100 °
- Dip: -60 °
- Loc. Confidence: high
- Loc. Source: document

#### QA/QC

- Laboratory: ALS Brisbane
- QA/QC Disclosed: Yes
- QP Signed: Yes

#### Deleterious

- Deleterious Flag: No

#### Compositing

- Cutoff Grade: 0.2
- Cutoff Unit: % Cu
- Dilution Disclosed: Yes
- Max Dilution: 2 m

#### Review

- Needs Review: Yes
- Review Reason: historical\_restatement
- Interp. Status: scored
- Historical: Yes

#### Dates

- Event date: 2026-10-11T00:00:00.000Z

Reasoning: This previously reported lead intercept shows a moderate grade over a narrow width, but has low novelty.

- Positive factor: Moderate lead grade for VMS deposit type

- Positive factor: QA/QC procedures disclosed

- Positive factor: Compositing parameters transparent

- Negative factor: Result is previously reported, low novelty

Evidence · table

> 4.7

Context: 5.5

#### Tags used in scoring

**Nearology Play**

Polarity: neutral

Definition: Value premise rests on proximity to a known deposit rather than own results.

Why it applies: proximity is offered as the value premise: "1 A N N O U N C E M E N T QMINES DISCOVERS COPPER SULPHIDES 180M BEYOND MT CHALMERS RESOURCE HIGHLIGHTS • New Copper Dis"

#### Rejected tags

**Stale Data Re-release** — Rejected; excluded from scoring

Polarity: negative

Definition: Historical results re-announced with no new assays or reinterpretation — low genuine novelty.

Reason: The intercept is explicitly marked as 'Previously reported' in the table.

Evidence · table

> Previously reported

Context: 26MCDD003

**QA/QC Disclosed** — Rejected; excluded from scoring

Polarity: positive

Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\).

Reason: The JORC table details internal QA/QC review by QMines technical personnel and the Competent Person.

Evidence · text

> Drilling, logging, sampling, assay and QAQC data were internally reviewed by QMines technical personnel and the Competent Person.

**Compositing Transparent** — Rejected; excluded from scoring

Polarity: positive

Definition: Cut-off grade and internal dilution rules are clearly stated for reported intervals.

Reason: The table specifies a 0.20% Cu lower cut off and maximum 2m internal dilution for the reported intercepts.

Evidence · text

> 0.20% Cu lower cut off, maximum 2m internal dilution.

### 26MCDD003

[Link to this fact](https://atlas-staging.minestarters.com/news/qml-copper-discovery-at-mt-chalmers--fe382ad6-14fe-48fd-abdf-bcef62bdf4fa#fact-drill-facts-39)

Mt Chalmers West · silver

Historical result

Needs review: historical\_restatement

#### Identity

- Hole ID: 26MCDD003
- Project: Mt Chalmers West
- Commodity: silver
- Region: australia\_qld
- Reported Region: australia\_qld
- Ticker: QML

#### Geometry

- Grade: 29
- Grade Unit: g/t
- Intercept: 5.5 m
- From: 28.5 m
- To: 34 m
- Hole Depth: 102 m
- Intercept Depth: 28.5 m

#### Classification

- Deposit Type: vms
- Program: exploration
- Sample Type: drill
- Group ID: 26MCDD003:28.5-34
- Mining Method: unknown

#### Location

- Easting: 259733
- Northing: 7421242
- CRS: UTM
- Elevation: 96 m
- Azimuth: 100 °
- Dip: -60 °
- Loc. Confidence: high
- Loc. Source: document

#### QA/QC

- Laboratory: ALS Brisbane
- QA/QC Disclosed: Yes
- QP Signed: Yes

#### Deleterious

- Deleterious Flag: No

#### Compositing

- Cutoff Grade: 0.2
- Cutoff Unit: % Cu
- Dilution Disclosed: Yes
- Max Dilution: 2 m

#### Review

- Needs Review: Yes
- Review Reason: historical\_restatement
- Interp. Status: scored
- Historical: Yes

#### Dates

- Event date: 2026-10-11T00:00:00.000Z

Reasoning: This previously reported silver intercept shows a moderate grade over a narrow width, but has low novelty.

- Positive factor: Moderate silver grade for VMS deposit type

- Positive factor: QA/QC procedures disclosed

- Positive factor: Compositing parameters transparent

- Negative factor: Result is previously reported, low novelty

Evidence · table

> 29

Context: 5.5

#### Tags used in scoring

**Nearology Play**

Polarity: neutral

Definition: Value premise rests on proximity to a known deposit rather than own results.

Why it applies: proximity is offered as the value premise: "1 A N N O U N C E M E N T QMINES DISCOVERS COPPER SULPHIDES 180M BEYOND MT CHALMERS RESOURCE HIGHLIGHTS • New Copper Dis"

#### Rejected tags

**Stale Data Re-release** — Rejected; excluded from scoring

Polarity: negative

Definition: Historical results re-announced with no new assays or reinterpretation — low genuine novelty.

Reason: The intercept is explicitly marked as 'Previously reported' in the table.

Evidence · table

> Previously reported

Context: 26MCDD003

**QA/QC Disclosed** — Rejected; excluded from scoring

Polarity: positive

Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\).

Reason: The JORC table details internal QA/QC review by QMines technical personnel and the Competent Person.

Evidence · text

> Drilling, logging, sampling, assay and QAQC data were internally reviewed by QMines technical personnel and the Competent Person.

**Compositing Transparent** — Rejected; excluded from scoring

Polarity: positive

Definition: Cut-off grade and internal dilution rules are clearly stated for reported intervals.

Reason: The table specifies a 0.20% Cu lower cut off and maximum 2m internal dilution for the reported intercepts.

Evidence · text

> 0.20% Cu lower cut off, maximum 2m internal dilution.

### 26MCDD003

[Link to this fact](https://atlas-staging.minestarters.com/news/qml-copper-discovery-at-mt-chalmers--fe382ad6-14fe-48fd-abdf-bcef62bdf4fa#fact-drill-facts-40)

Mt Chalmers West · copper

Historical result

Needs review: historical\_restatement

#### Identity

- Hole ID: 26MCDD003
- Project: Mt Chalmers West
- Commodity: copper
- Region: australia\_qld
- Reported Region: australia\_qld
- Ticker: QML

#### Geometry

- Grade: 1.7
- Grade Unit: %
- Intercept: 18 m
- From: 54 m
- To: 72 m
- Hole Depth: 102 m
- Intercept Depth: 54 m

#### Classification

- Deposit Type: vms
- Program: exploration
- Sample Type: drill
- Group ID: 26MCDD003:54-72
- Mining Method: unknown

#### Location

- Easting: 259733
- Northing: 7421242
- CRS: UTM
- Elevation: 96 m
- Azimuth: 100 °
- Dip: -60 °
- Loc. Confidence: high
- Loc. Source: document

#### QA/QC

- Laboratory: ALS Brisbane
- QA/QC Disclosed: Yes
- QP Signed: Yes

#### Deleterious

- Deleterious Flag: No

#### Compositing

- Cutoff Grade: 0.2
- Cutoff Unit: % Cu
- Dilution Disclosed: Yes
- Max Dilution: 2 m

#### Review

- Needs Review: Yes
- Review Reason: historical\_restatement
- Interp. Status: scored
- Historical: Yes

#### Dates

- Event date: 2026-10-11T00:00:00.000Z

Reasoning: This previously reported copper intercept shows a moderate grade over a moderate width, but has low novelty.

- Positive factor: Moderate copper grade for VMS deposit type

- Positive factor: Moderate intercept length \(18m\)

- Positive factor: QA/QC procedures disclosed

- Positive factor: Compositing parameters transparent

- Negative factor: Result is previously reported, low novelty

Evidence · table

> 1.7

Context: 18.0

#### Tags used in scoring

**Nearology Play**

Polarity: neutral

Definition: Value premise rests on proximity to a known deposit rather than own results.

Why it applies: proximity is offered as the value premise: "1 A N N O U N C E M E N T QMINES DISCOVERS COPPER SULPHIDES 180M BEYOND MT CHALMERS RESOURCE HIGHLIGHTS • New Copper Dis"

#### Rejected tags

**Stale Data Re-release** — Rejected; excluded from scoring

Polarity: negative

Definition: Historical results re-announced with no new assays or reinterpretation — low genuine novelty.

Reason: The intercept is explicitly marked as 'Previously reported' in the table.

Evidence · table

> Previously reported

Context: 26MCDD003

**QA/QC Disclosed** — Rejected; excluded from scoring

Polarity: positive

Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\).

Reason: The JORC table details internal QA/QC review by QMines technical personnel and the Competent Person.

Evidence · text

> Drilling, logging, sampling, assay and QAQC data were internally reviewed by QMines technical personnel and the Competent Person.

**Compositing Transparent** — Rejected; excluded from scoring

Polarity: positive

Definition: Cut-off grade and internal dilution rules are clearly stated for reported intervals.

Reason: The table specifies a 0.20% Cu lower cut off and maximum 2m internal dilution for the reported intercepts.

Evidence · text

> 0.20% Cu lower cut off, maximum 2m internal dilution.

### 26MCDD003

[Link to this fact](https://atlas-staging.minestarters.com/news/qml-copper-discovery-at-mt-chalmers--fe382ad6-14fe-48fd-abdf-bcef62bdf4fa#fact-drill-facts-41)

Mt Chalmers West · gold

Historical result

Needs review: historical\_restatement

#### Identity

- Hole ID: 26MCDD003
- Project: Mt Chalmers West
- Commodity: gold
- Region: australia\_qld
- Reported Region: australia\_qld
- Ticker: QML

#### Geometry

- Grade: 2.7
- Grade Unit: g/t
- Intercept: 18 m
- From: 54 m
- To: 72 m
- Hole Depth: 102 m
- Intercept Depth: 54 m

#### Classification

- Deposit Type: vms
- Program: exploration
- Sample Type: drill
- Group ID: 26MCDD003:54-72
- Mining Method: unknown

#### Location

- Easting: 259733
- Northing: 7421242
- CRS: UTM
- Elevation: 96 m
- Azimuth: 100 °
- Dip: -60 °
- Loc. Confidence: high
- Loc. Source: document

#### QA/QC

- Laboratory: ALS Brisbane
- QA/QC Disclosed: Yes
- QP Signed: Yes

#### Deleterious

- Deleterious Flag: No

#### Compositing

- Cutoff Grade: 0.2
- Cutoff Unit: % Cu
- Dilution Disclosed: Yes
- Max Dilution: 2 m

#### Review

- Needs Review: Yes
- Review Reason: historical\_restatement
- Interp. Status: scored
- Historical: Yes

#### Dates

- Event date: 2026-10-11T00:00:00.000Z

Reasoning: This previously reported gold intercept shows a strong grade over a moderate width, but has low novelty.

- Positive factor: Strong gold grade for VMS deposit type

- Positive factor: Moderate intercept length \(18m\)

- Positive factor: QA/QC procedures disclosed

- Positive factor: Compositing parameters transparent

- Negative factor: Result is previously reported, low novelty

Evidence · table

> 2.7

Context: 18.0

#### Tags used in scoring

**Nearology Play**

Polarity: neutral

Definition: Value premise rests on proximity to a known deposit rather than own results.

Why it applies: proximity is offered as the value premise: "1 A N N O U N C E M E N T QMINES DISCOVERS COPPER SULPHIDES 180M BEYOND MT CHALMERS RESOURCE HIGHLIGHTS • New Copper Dis"

#### Rejected tags

**Stale Data Re-release** — Rejected; excluded from scoring

Polarity: negative

Definition: Historical results re-announced with no new assays or reinterpretation — low genuine novelty.

Reason: The intercept is explicitly marked as 'Previously reported' in the table.

Evidence · table

> Previously reported

Context: 26MCDD003

**QA/QC Disclosed** — Rejected; excluded from scoring

Polarity: positive

Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\).

Reason: The JORC table details internal QA/QC review by QMines technical personnel and the Competent Person.

Evidence · text

> Drilling, logging, sampling, assay and QAQC data were internally reviewed by QMines technical personnel and the Competent Person.

**Compositing Transparent** — Rejected; excluded from scoring

Polarity: positive

Definition: Cut-off grade and internal dilution rules are clearly stated for reported intervals.

Reason: The table specifies a 0.20% Cu lower cut off and maximum 2m internal dilution for the reported intercepts.

Evidence · text

> 0.20% Cu lower cut off, maximum 2m internal dilution.

### 26MCDD003

[Link to this fact](https://atlas-staging.minestarters.com/news/qml-copper-discovery-at-mt-chalmers--fe382ad6-14fe-48fd-abdf-bcef62bdf4fa#fact-drill-facts-42)

Mt Chalmers West · silver

Historical result

Needs review: historical\_restatement

#### Identity

- Hole ID: 26MCDD003
- Project: Mt Chalmers West
- Commodity: silver
- Region: australia\_qld
- Reported Region: australia\_qld
- Ticker: QML

#### Geometry

- Grade: 2
- Grade Unit: g/t
- Intercept: 18 m
- From: 54 m
- To: 72 m
- Hole Depth: 102 m
- Intercept Depth: 54 m

#### Classification

- Deposit Type: vms
- Program: exploration
- Sample Type: drill
- Group ID: 26MCDD003:54-72
- Mining Method: unknown

#### Location

- Easting: 259733
- Northing: 7421242
- CRS: UTM
- Elevation: 96 m
- Azimuth: 100 °
- Dip: -60 °
- Loc. Confidence: high
- Loc. Source: document

#### QA/QC

- Laboratory: ALS Brisbane
- QA/QC Disclosed: Yes
- QP Signed: Yes

#### Deleterious

- Deleterious Flag: No

#### Compositing

- Cutoff Grade: 0.2
- Cutoff Unit: % Cu
- Dilution Disclosed: Yes
- Max Dilution: 2 m

#### Review

- Needs Review: Yes
- Review Reason: historical\_restatement
- Interp. Status: scored
- Historical: Yes

#### Dates

- Event date: 2026-10-11T00:00:00.000Z

Reasoning: This previously reported silver intercept shows a very low grade over a moderate width, contributing little new information.

- Positive factor: QA/QC procedures disclosed

- Positive factor: Compositing parameters transparent

- Negative factor: Very low silver grade

- Negative factor: Result is previously reported, low novelty

Evidence · table

> 2

Context: 18.0

#### Tags used in scoring

**Nearology Play**

Polarity: neutral

Definition: Value premise rests on proximity to a known deposit rather than own results.

Why it applies: proximity is offered as the value premise: "1 A N N O U N C E M E N T QMINES DISCOVERS COPPER SULPHIDES 180M BEYOND MT CHALMERS RESOURCE HIGHLIGHTS • New Copper Dis"

#### Rejected tags

**Stale Data Re-release** — Rejected; excluded from scoring

Polarity: negative

Definition: Historical results re-announced with no new assays or reinterpretation — low genuine novelty.

Reason: The intercept is explicitly marked as 'Previously reported' in the table.

Evidence · table

> Previously reported

Context: 26MCDD003

**QA/QC Disclosed** — Rejected; excluded from scoring

Polarity: positive

Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\).

Reason: The JORC table details internal QA/QC review by QMines technical personnel and the Competent Person.

Evidence · text

> Drilling, logging, sampling, assay and QAQC data were internally reviewed by QMines technical personnel and the Competent Person.

**Compositing Transparent** — Rejected; excluded from scoring

Polarity: positive

Definition: Cut-off grade and internal dilution rules are clearly stated for reported intervals.

Reason: The table specifies a 0.20% Cu lower cut off and maximum 2m internal dilution for the reported intercepts.

Evidence · text

> 0.20% Cu lower cut off, maximum 2m internal dilution.

### 26MCDD003

[Link to this fact](https://atlas-staging.minestarters.com/news/qml-copper-discovery-at-mt-chalmers--fe382ad6-14fe-48fd-abdf-bcef62bdf4fa#fact-drill-facts-43)

Mt Chalmers West · copper

Historical result

Needs review: historical\_restatement

#### Identity

- Hole ID: 26MCDD003
- Project: Mt Chalmers West
- Commodity: copper
- Region: australia\_qld
- Reported Region: australia\_qld
- Ticker: QML

#### Geometry

- Grade: 2
- Grade Unit: %
- Intercept: 12 m
- From: 54 m
- To: 66 m
- Hole Depth: 102 m
- Intercept Depth: 54 m

#### Classification

- Deposit Type: vms
- Program: exploration
- Sample Type: drill
- Group ID: 26MCDD003:54-66
- Mining Method: unknown

#### Location

- Easting: 259733
- Northing: 7421242
- CRS: UTM
- Elevation: 96 m
- Azimuth: 100 °
- Dip: -60 °
- Loc. Confidence: high
- Loc. Source: document

#### QA/QC

- Laboratory: ALS Brisbane
- QA/QC Disclosed: Yes
- QP Signed: Yes

#### Deleterious

- Deleterious Flag: No

#### Compositing

- Cutoff Grade: 0.2
- Cutoff Unit: % Cu
- Dilution Disclosed: Yes
- Max Dilution: 2 m

#### Review

- Needs Review: Yes
- Review Reason: historical\_restatement
- Interp. Status: scored
- Historical: Yes

#### Dates

- Event date: 2026-10-11T00:00:00.000Z

Reasoning: This previously reported sub-interval shows a strong copper grade over a moderate width, but has low novelty.

- Positive factor: Strong copper grade for VMS deposit type

- Positive factor: Moderate intercept length \(12m\)

- Positive factor: QA/QC procedures disclosed

- Positive factor: Compositing parameters transparent

- Negative factor: Result is previously reported, low novelty

Evidence · table

> 2.0

Context: 12.0

#### Tags used in scoring

**Nearology Play**

Polarity: neutral

Definition: Value premise rests on proximity to a known deposit rather than own results.

Why it applies: proximity is offered as the value premise: "1 A N N O U N C E M E N T QMINES DISCOVERS COPPER SULPHIDES 180M BEYOND MT CHALMERS RESOURCE HIGHLIGHTS • New Copper Dis"

#### Rejected tags

**Stale Data Re-release** — Rejected; excluded from scoring

Polarity: negative

Definition: Historical results re-announced with no new assays or reinterpretation — low genuine novelty.

Reason: The intercept is explicitly marked as 'Previously reported' in the table.

Evidence · table

> Previously reported

Context: 26MCDD003

**QA/QC Disclosed** — Rejected; excluded from scoring

Polarity: positive

Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\).

Reason: The JORC table details internal QA/QC review by QMines technical personnel and the Competent Person.

Evidence · text

> Drilling, logging, sampling, assay and QAQC data were internally reviewed by QMines technical personnel and the Competent Person.

**Compositing Transparent** — Rejected; excluded from scoring

Polarity: positive

Definition: Cut-off grade and internal dilution rules are clearly stated for reported intervals.

Reason: The table specifies a 0.20% Cu lower cut off and maximum 2m internal dilution for the reported intercepts.

Evidence · text

> 0.20% Cu lower cut off, maximum 2m internal dilution.

### 26MCDD003

[Link to this fact](https://atlas-staging.minestarters.com/news/qml-copper-discovery-at-mt-chalmers--fe382ad6-14fe-48fd-abdf-bcef62bdf4fa#fact-drill-facts-44)

Mt Chalmers West · gold

Historical result

Needs review: historical\_restatement

#### Identity

- Hole ID: 26MCDD003
- Project: Mt Chalmers West
- Commodity: gold
- Region: australia\_qld
- Reported Region: australia\_qld
- Ticker: QML

#### Geometry

- Grade: 3.8
- Grade Unit: g/t
- Intercept: 12 m
- From: 54 m
- To: 66 m
- Hole Depth: 102 m
- Intercept Depth: 54 m

#### Classification

- Deposit Type: vms
- Program: exploration
- Sample Type: drill
- Group ID: 26MCDD003:54-66
- Mining Method: unknown

#### Location

- Easting: 259733
- Northing: 7421242
- CRS: UTM
- Elevation: 96 m
- Azimuth: 100 °
- Dip: -60 °
- Loc. Confidence: high
- Loc. Source: document

#### QA/QC

- Laboratory: ALS Brisbane
- QA/QC Disclosed: Yes
- QP Signed: Yes

#### Deleterious

- Deleterious Flag: No

#### Compositing

- Cutoff Grade: 0.2
- Cutoff Unit: % Cu
- Dilution Disclosed: Yes
- Max Dilution: 2 m

#### Review

- Needs Review: Yes
- Review Reason: historical\_restatement
- Interp. Status: scored
- Historical: Yes

#### Dates

- Event date: 2026-10-11T00:00:00.000Z

Reasoning: This previously reported sub-interval shows a strong gold grade over a moderate width, but has low novelty.

- Positive factor: Strong gold grade for VMS deposit type

- Positive factor: Moderate intercept length \(12m\)

- Positive factor: QA/QC procedures disclosed

- Positive factor: Compositing parameters transparent

- Negative factor: Result is previously reported, low novelty

Evidence · table

> 3.8

Context: 12.0

#### Tags used in scoring

**Nearology Play**

Polarity: neutral

Definition: Value premise rests on proximity to a known deposit rather than own results.

Why it applies: proximity is offered as the value premise: "1 A N N O U N C E M E N T QMINES DISCOVERS COPPER SULPHIDES 180M BEYOND MT CHALMERS RESOURCE HIGHLIGHTS • New Copper Dis"

#### Rejected tags

**Stale Data Re-release** — Rejected; excluded from scoring

Polarity: negative

Definition: Historical results re-announced with no new assays or reinterpretation — low genuine novelty.

Reason: The intercept is explicitly marked as 'Previously reported' in the table.

Evidence · table

> Previously reported

Context: 26MCDD003

**QA/QC Disclosed** — Rejected; excluded from scoring

Polarity: positive

Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\).

Reason: The JORC table details internal QA/QC review by QMines technical personnel and the Competent Person.

Evidence · text

> Drilling, logging, sampling, assay and QAQC data were internally reviewed by QMines technical personnel and the Competent Person.

**Compositing Transparent** — Rejected; excluded from scoring

Polarity: positive

Definition: Cut-off grade and internal dilution rules are clearly stated for reported intervals.

Reason: The table specifies a 0.20% Cu lower cut off and maximum 2m internal dilution for the reported intercepts.

Evidence · text

> 0.20% Cu lower cut off, maximum 2m internal dilution.

### 26MCDD003

[Link to this fact](https://atlas-staging.minestarters.com/news/qml-copper-discovery-at-mt-chalmers--fe382ad6-14fe-48fd-abdf-bcef62bdf4fa#fact-drill-facts-45)

Mt Chalmers West · silver

Historical result

Needs review: historical\_restatement

#### Identity

- Hole ID: 26MCDD003
- Project: Mt Chalmers West
- Commodity: silver
- Region: australia\_qld
- Reported Region: australia\_qld
- Ticker: QML

#### Geometry

- Grade: 2
- Grade Unit: g/t
- Intercept: 12 m
- From: 54 m
- To: 66 m
- Hole Depth: 102 m
- Intercept Depth: 54 m

#### Classification

- Deposit Type: vms
- Program: exploration
- Sample Type: drill
- Group ID: 26MCDD003:54-66
- Mining Method: unknown

#### Location

- Easting: 259733
- Northing: 7421242
- CRS: UTM
- Elevation: 96 m
- Azimuth: 100 °
- Dip: -60 °
- Loc. Confidence: high
- Loc. Source: document

#### QA/QC

- Laboratory: ALS Brisbane
- QA/QC Disclosed: Yes
- QP Signed: Yes

#### Deleterious

- Deleterious Flag: No

#### Compositing

- Cutoff Grade: 0.2
- Cutoff Unit: % Cu
- Dilution Disclosed: Yes
- Max Dilution: 2 m

#### Review

- Needs Review: Yes
- Review Reason: historical\_restatement
- Interp. Status: scored
- Historical: Yes

#### Dates

- Event date: 2026-10-11T00:00:00.000Z

Reasoning: This previously reported sub-interval shows a very low silver grade over a moderate width, contributing little new information.

- Positive factor: QA/QC procedures disclosed

- Positive factor: Compositing parameters transparent

- Negative factor: Very low silver grade

- Negative factor: Result is previously reported, low novelty

Evidence · table

> 2

Context: 12.0

#### Tags used in scoring

**Nearology Play**

Polarity: neutral

Definition: Value premise rests on proximity to a known deposit rather than own results.

Why it applies: proximity is offered as the value premise: "1 A N N O U N C E M E N T QMINES DISCOVERS COPPER SULPHIDES 180M BEYOND MT CHALMERS RESOURCE HIGHLIGHTS • New Copper Dis"

#### Rejected tags

**Stale Data Re-release** — Rejected; excluded from scoring

Polarity: negative

Definition: Historical results re-announced with no new assays or reinterpretation — low genuine novelty.

Reason: The intercept is explicitly marked as 'Previously reported' in the table.

Evidence · table

> Previously reported

Context: 26MCDD003

**QA/QC Disclosed** — Rejected; excluded from scoring

Polarity: positive

Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\).

Reason: The JORC table details internal QA/QC review by QMines technical personnel and the Competent Person.

Evidence · text

> Drilling, logging, sampling, assay and QAQC data were internally reviewed by QMines technical personnel and the Competent Person.

**Compositing Transparent** — Rejected; excluded from scoring

Polarity: positive

Definition: Cut-off grade and internal dilution rules are clearly stated for reported intervals.

Reason: The table specifies a 0.20% Cu lower cut off and maximum 2m internal dilution for the reported intercepts.

Evidence · text

> 0.20% Cu lower cut off, maximum 2m internal dilution.

### 26MCDD003

[Link to this fact](https://atlas-staging.minestarters.com/news/qml-copper-discovery-at-mt-chalmers--fe382ad6-14fe-48fd-abdf-bcef62bdf4fa#fact-drill-facts-46)

Mt Chalmers West · copper

Historical result

Needs review: historical\_restatement

#### Identity

- Hole ID: 26MCDD003
- Project: Mt Chalmers West
- Commodity: copper
- Region: australia\_qld
- Reported Region: australia\_qld
- Ticker: QML

#### Geometry

- Grade: 3.3
- Grade Unit: %
- Intercept: 1 m
- From: 61 m
- To: 62 m
- Hole Depth: 102 m
- Intercept Depth: 61 m

#### Classification

- Deposit Type: vms
- Program: exploration
- Sample Type: drill
- Group ID: 26MCDD003:61-62
- Mining Method: unknown

#### Location

- Easting: 259733
- Northing: 7421242
- CRS: UTM
- Elevation: 96 m
- Azimuth: 100 °
- Dip: -60 °
- Loc. Confidence: high
- Loc. Source: document

#### QA/QC

- Laboratory: ALS Brisbane
- QA/QC Disclosed: Yes
- QP Signed: Yes

#### Deleterious

- Deleterious Flag: No

#### Compositing

- Cutoff Grade: 0.2
- Cutoff Unit: % Cu
- Dilution Disclosed: Yes
- Max Dilution: 2 m

#### Review

- Needs Review: Yes
- Review Reason: historical\_restatement
- Interp. Status: scored
- Historical: Yes

#### Dates

- Event date: 2026-10-11T00:00:00.000Z

Reasoning: This previously reported sub-interval shows a strong copper grade over a very narrow width, but has low novelty.

- Positive factor: Strong copper grade for VMS deposit type

- Positive factor: QA/QC procedures disclosed

- Positive factor: Compositing parameters transparent

- Negative factor: Very narrow intercept length \(1m\)

- Negative factor: Result is previously reported, low novelty

Evidence · table

> 3.3

Context: 1.0

#### Tags used in scoring

**Nearology Play**

Polarity: neutral

Definition: Value premise rests on proximity to a known deposit rather than own results.

Why it applies: proximity is offered as the value premise: "1 A N N O U N C E M E N T QMINES DISCOVERS COPPER SULPHIDES 180M BEYOND MT CHALMERS RESOURCE HIGHLIGHTS • New Copper Dis"

#### Rejected tags

**Stale Data Re-release** — Rejected; excluded from scoring

Polarity: negative

Definition: Historical results re-announced with no new assays or reinterpretation — low genuine novelty.

Reason: The intercept is explicitly marked as 'Previously reported' in the table.

Evidence · table

> Previously reported

Context: 26MCDD003

**QA/QC Disclosed** — Rejected; excluded from scoring

Polarity: positive

Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\).

Reason: The JORC table details internal QA/QC review by QMines technical personnel and the Competent Person.

Evidence · text

> Drilling, logging, sampling, assay and QAQC data were internally reviewed by QMines technical personnel and the Competent Person.

**Compositing Transparent** — Rejected; excluded from scoring

Polarity: positive

Definition: Cut-off grade and internal dilution rules are clearly stated for reported intervals.

Reason: The table specifies a 0.20% Cu lower cut off and maximum 2m internal dilution for the reported intercepts.

Evidence · text

> 0.20% Cu lower cut off, maximum 2m internal dilution.

### 26MCDD003

[Link to this fact](https://atlas-staging.minestarters.com/news/qml-copper-discovery-at-mt-chalmers--fe382ad6-14fe-48fd-abdf-bcef62bdf4fa#fact-drill-facts-47)

Mt Chalmers West · gold

Historical result

Needs review: historical\_restatement

#### Identity

- Hole ID: 26MCDD003
- Project: Mt Chalmers West
- Commodity: gold
- Region: australia\_qld
- Reported Region: australia\_qld
- Ticker: QML

#### Geometry

- Grade: 20.3
- Grade Unit: g/t
- Intercept: 1 m
- From: 61 m
- To: 62 m
- Hole Depth: 102 m
- Intercept Depth: 61 m

#### Classification

- Deposit Type: vms
- Program: exploration
- Sample Type: drill
- Group ID: 26MCDD003:61-62
- Mining Method: unknown

#### Location

- Easting: 259733
- Northing: 7421242
- CRS: UTM
- Elevation: 96 m
- Azimuth: 100 °
- Dip: -60 °
- Loc. Confidence: high
- Loc. Source: document

#### QA/QC

- Laboratory: ALS Brisbane
- QA/QC Disclosed: Yes
- QP Signed: Yes

#### Deleterious

- Deleterious Flag: No

#### Compositing

- Cutoff Grade: 0.2
- Cutoff Unit: % Cu
- Dilution Disclosed: Yes
- Max Dilution: 2 m

#### Review

- Needs Review: Yes
- Review Reason: historical\_restatement
- Interp. Status: scored
- Historical: Yes

#### Dates

- Event date: 2026-10-11T00:00:00.000Z

Reasoning: This previously reported sub-interval shows an exceptional gold grade over a very narrow width, indicating high-grade mineralization, but has low novelty.

- Positive factor: Exceptional gold grade for VMS deposit type

- Positive factor: QA/QC procedures disclosed

- Positive factor: Compositing parameters transparent

- Negative factor: Very narrow intercept length \(1m\)

- Negative factor: Result is previously reported, low novelty

Evidence · table

> 20.3

Context: 1.0

#### Tags used in scoring

**Nearology Play**

Polarity: neutral

Definition: Value premise rests on proximity to a known deposit rather than own results.

Why it applies: proximity is offered as the value premise: "1 A N N O U N C E M E N T QMINES DISCOVERS COPPER SULPHIDES 180M BEYOND MT CHALMERS RESOURCE HIGHLIGHTS • New Copper Dis"

#### Rejected tags

**Stale Data Re-release** — Rejected; excluded from scoring

Polarity: negative

Definition: Historical results re-announced with no new assays or reinterpretation — low genuine novelty.

Reason: The intercept is explicitly marked as 'Previously reported' in the table.

Evidence · table

> Previously reported

Context: 26MCDD003

**QA/QC Disclosed** — Rejected; excluded from scoring

Polarity: positive

Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\).

Reason: The JORC table details internal QA/QC review by QMines technical personnel and the Competent Person.

Evidence · text

> Drilling, logging, sampling, assay and QAQC data were internally reviewed by QMines technical personnel and the Competent Person.

**Compositing Transparent** — Rejected; excluded from scoring

Polarity: positive

Definition: Cut-off grade and internal dilution rules are clearly stated for reported intervals.

Reason: The table specifies a 0.20% Cu lower cut off and maximum 2m internal dilution for the reported intercepts.

Evidence · text

> 0.20% Cu lower cut off, maximum 2m internal dilution.

**Bonanza Intercept** — Rejected; excluded from scoring

Polarity: positive

Definition: Exceptionally high-grade zone, well above the deposit-type norm.

Reason: The gold grade of 20.3 g/t is well above the exceptional threshold of 5 g/t for VMS deposits.

Evidence · table

> 20.3

Context: 1.0

### 26MCDD003

[Link to this fact](https://atlas-staging.minestarters.com/news/qml-copper-discovery-at-mt-chalmers--fe382ad6-14fe-48fd-abdf-bcef62bdf4fa#fact-drill-facts-48)

Mt Chalmers West · silver

Historical result

Needs review: historical\_restatement

#### Identity

- Hole ID: 26MCDD003
- Project: Mt Chalmers West
- Commodity: silver
- Region: australia\_qld
- Reported Region: australia\_qld
- Ticker: QML

#### Geometry

- Grade: 5
- Grade Unit: g/t
- Intercept: 1 m
- From: 61 m
- To: 62 m
- Hole Depth: 102 m
- Intercept Depth: 61 m

#### Classification

- Deposit Type: vms
- Program: exploration
- Sample Type: drill
- Group ID: 26MCDD003:61-62
- Mining Method: unknown

#### Location

- Easting: 259733
- Northing: 7421242
- CRS: UTM
- Elevation: 96 m
- Azimuth: 100 °
- Dip: -60 °
- Loc. Confidence: high
- Loc. Source: document

#### QA/QC

- Laboratory: ALS Brisbane
- QA/QC Disclosed: Yes
- QP Signed: Yes

#### Deleterious

- Deleterious Flag: No

#### Compositing

- Cutoff Grade: 0.2
- Cutoff Unit: % Cu
- Dilution Disclosed: Yes
- Max Dilution: 2 m

#### Review

- Needs Review: Yes
- Review Reason: historical\_restatement
- Interp. Status: scored
- Historical: Yes

#### Dates

- Event date: 2026-10-11T00:00:00.000Z

Reasoning: This previously reported sub-interval shows a very low silver grade over a very narrow width, contributing little new information.

- Positive factor: QA/QC procedures disclosed

- Positive factor: Compositing parameters transparent

- Negative factor: Very low silver grade

- Negative factor: Very narrow intercept length \(1m\)

- Negative factor: Result is previously reported, low novelty

Evidence · table

> 5

Context: 1.0

#### Tags used in scoring

**Nearology Play**

Polarity: neutral

Definition: Value premise rests on proximity to a known deposit rather than own results.

Why it applies: proximity is offered as the value premise: "1 A N N O U N C E M E N T QMINES DISCOVERS COPPER SULPHIDES 180M BEYOND MT CHALMERS RESOURCE HIGHLIGHTS • New Copper Dis"

#### Rejected tags

**Stale Data Re-release** — Rejected; excluded from scoring

Polarity: negative

Definition: Historical results re-announced with no new assays or reinterpretation — low genuine novelty.

Reason: The intercept is explicitly marked as 'Previously reported' in the table.

Evidence · table

> Previously reported

Context: 26MCDD003

**QA/QC Disclosed** — Rejected; excluded from scoring

Polarity: positive

Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\).

Reason: The JORC table details internal QA/QC review by QMines technical personnel and the Competent Person.

Evidence · text

> Drilling, logging, sampling, assay and QAQC data were internally reviewed by QMines technical personnel and the Competent Person.

**Compositing Transparent** — Rejected; excluded from scoring

Polarity: positive

Definition: Cut-off grade and internal dilution rules are clearly stated for reported intervals.

Reason: The table specifies a 0.20% Cu lower cut off and maximum 2m internal dilution for the reported intercepts.

Evidence · text

> 0.20% Cu lower cut off, maximum 2m internal dilution.

### 26MCRD005

[Link to this fact](https://atlas-staging.minestarters.com/news/qml-copper-discovery-at-mt-chalmers--fe382ad6-14fe-48fd-abdf-bcef62bdf4fa#fact-drill-facts-49)

Mt Chalmers West · copper

Historical result

Needs review: historical\_restatement

#### Identity

- Hole ID: 26MCRD005
- Project: Mt Chalmers West
- Commodity: copper
- Region: australia\_qld
- Reported Region: australia\_qld
- Ticker: QML

#### Geometry

- Grade: 1.03
- Grade Unit: %
- Intercept: 44 m
- From: 103 m
- To: 147 m
- Hole Depth: 156.1 m
- Intercept Depth: 103 m

#### Classification

- Deposit Type: vms
- Program: exploration
- Sample Type: drill
- Group ID: 26MCRD005:103-147
- Mining Method: unknown

#### Location

- Easting: 260074
- Northing: 7421304
- CRS: UTM
- Elevation: 125.6 m
- Azimuth: 143 °
- Dip: -75 °
- Loc. Confidence: high
- Loc. Source: document

#### QA/QC

- Laboratory: ALS Brisbane
- QA/QC Disclosed: Yes
- QP Signed: Yes

#### Deleterious

- Deleterious Flag: No

#### Compositing

- Cutoff Grade: 0.2
- Cutoff Unit: % Cu
- Dilution Disclosed: Yes
- Max Dilution: 2 m

#### Review

- Needs Review: Yes
- Review Reason: historical\_restatement
- Interp. Status: scored
- Historical: Yes

#### Dates

- Event date: 2026-10-11T00:00:00.000Z

Reasoning: This previously reported copper intercept shows a moderate grade over a significant width, indicating good mineralization, but has low novelty.

- Positive factor: Moderate copper grade for VMS deposit type

- Positive factor: Significant intercept length \(44m\)

- Positive factor: QA/QC procedures disclosed

- Positive factor: Compositing parameters transparent

- Negative factor: Result is previously reported, low novelty

Evidence · table

> 1.03

Context: 44.0

#### Tags used in scoring

**Nearology Play**

Polarity: neutral

Definition: Value premise rests on proximity to a known deposit rather than own results.

Why it applies: proximity is offered as the value premise: "1 A N N O U N C E M E N T QMINES DISCOVERS COPPER SULPHIDES 180M BEYOND MT CHALMERS RESOURCE HIGHLIGHTS • New Copper Dis"

#### Rejected tags

**Stale Data Re-release** — Rejected; excluded from scoring

Polarity: negative

Definition: Historical results re-announced with no new assays or reinterpretation — low genuine novelty.

Reason: The intercept is explicitly marked as 'Previously reported' in the table.

Evidence · table

> Previously reported

Context: 26MCRD005

**QA/QC Disclosed** — Rejected; excluded from scoring

Polarity: positive

Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\).

Reason: The JORC table details internal QA/QC review by QMines technical personnel and the Competent Person.

Evidence · text

> Drilling, logging, sampling, assay and QAQC data were internally reviewed by QMines technical personnel and the Competent Person.

**Compositing Transparent** — Rejected; excluded from scoring

Polarity: positive

Definition: Cut-off grade and internal dilution rules are clearly stated for reported intervals.

Reason: The table specifies a 0.20% Cu lower cut off and maximum 2m internal dilution for the reported intercepts.

Evidence · text

> 0.20% Cu lower cut off, maximum 2m internal dilution.

### 26MCRD005

[Link to this fact](https://atlas-staging.minestarters.com/news/qml-copper-discovery-at-mt-chalmers--fe382ad6-14fe-48fd-abdf-bcef62bdf4fa#fact-drill-facts-50)

Mt Chalmers West · gold

Historical result

Needs review: historical\_restatement

#### Identity

- Hole ID: 26MCRD005
- Project: Mt Chalmers West
- Commodity: gold
- Region: australia\_qld
- Reported Region: australia\_qld
- Ticker: QML

#### Geometry

- Grade: 0.15
- Grade Unit: g/t
- Intercept: 44 m
- From: 103 m
- To: 147 m
- Hole Depth: 156.1 m
- Intercept Depth: 103 m

#### Classification

- Deposit Type: vms
- Program: exploration
- Sample Type: drill
- Group ID: 26MCRD005:103-147
- Mining Method: unknown

#### Location

- Easting: 260074
- Northing: 7421304
- CRS: UTM
- Elevation: 125.6 m
- Azimuth: 143 °
- Dip: -75 °
- Loc. Confidence: high
- Loc. Source: document

#### QA/QC

- Laboratory: ALS Brisbane
- QA/QC Disclosed: Yes
- QP Signed: Yes

#### Deleterious

- Deleterious Flag: No

#### Compositing

- Cutoff Grade: 0.2
- Cutoff Unit: % Cu
- Dilution Disclosed: Yes
- Max Dilution: 2 m

#### Review

- Needs Review: Yes
- Review Reason: historical\_restatement
- Interp. Status: scored
- Historical: Yes

#### Dates

- Event date: 2026-10-11T00:00:00.000Z

Reasoning: This previously reported gold intercept shows a very low grade over a significant width, contributing little new information.

- Positive factor: QA/QC procedures disclosed

- Positive factor: Compositing parameters transparent

- Negative factor: Very low gold grade

- Negative factor: Result is previously reported, low novelty

Evidence · table

> 0.15

Context: 44.0

#### Tags used in scoring

**Nearology Play**

Polarity: neutral

Definition: Value premise rests on proximity to a known deposit rather than own results.

Why it applies: proximity is offered as the value premise: "1 A N N O U N C E M E N T QMINES DISCOVERS COPPER SULPHIDES 180M BEYOND MT CHALMERS RESOURCE HIGHLIGHTS • New Copper Dis"

#### Rejected tags

**Stale Data Re-release** — Rejected; excluded from scoring

Polarity: negative

Definition: Historical results re-announced with no new assays or reinterpretation — low genuine novelty.

Reason: The intercept is explicitly marked as 'Previously reported' in the table.

Evidence · table

> Previously reported

Context: 26MCRD005

**QA/QC Disclosed** — Rejected; excluded from scoring

Polarity: positive

Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\).

Reason: The JORC table details internal QA/QC review by QMines technical personnel and the Competent Person.

Evidence · text

> Drilling, logging, sampling, assay and QAQC data were internally reviewed by QMines technical personnel and the Competent Person.

**Compositing Transparent** — Rejected; excluded from scoring

Polarity: positive

Definition: Cut-off grade and internal dilution rules are clearly stated for reported intervals.

Reason: The table specifies a 0.20% Cu lower cut off and maximum 2m internal dilution for the reported intercepts.

Evidence · text

> 0.20% Cu lower cut off, maximum 2m internal dilution.

### 26MCRD005

[Link to this fact](https://atlas-staging.minestarters.com/news/qml-copper-discovery-at-mt-chalmers--fe382ad6-14fe-48fd-abdf-bcef62bdf4fa#fact-drill-facts-51)

Mt Chalmers West · zinc

Historical result

Needs review: historical\_restatement

#### Identity

- Hole ID: 26MCRD005
- Project: Mt Chalmers West
- Commodity: zinc
- Region: australia\_qld
- Reported Region: australia\_qld
- Ticker: QML

#### Geometry

- Grade: 0.02
- Grade Unit: %
- Intercept: 44 m
- From: 103 m
- To: 147 m
- Hole Depth: 156.1 m
- Intercept Depth: 103 m

#### Classification

- Deposit Type: vms
- Program: exploration
- Sample Type: drill
- Group ID: 26MCRD005:103-147
- Mining Method: unknown

#### Location

- Easting: 260074
- Northing: 7421304
- CRS: UTM
- Elevation: 125.6 m
- Azimuth: 143 °
- Dip: -75 °
- Loc. Confidence: high
- Loc. Source: document

#### QA/QC

- Laboratory: ALS Brisbane
- QA/QC Disclosed: Yes
- QP Signed: Yes

#### Deleterious

- Deleterious Flag: No

#### Compositing

- Cutoff Grade: 0.2
- Cutoff Unit: % Cu
- Dilution Disclosed: Yes
- Max Dilution: 2 m

#### Review

- Needs Review: Yes
- Review Reason: historical\_restatement
- Interp. Status: scored
- Historical: Yes

#### Dates

- Event date: 2026-10-11T00:00:00.000Z

Reasoning: This previously reported zinc intercept shows a very low grade over a significant width, contributing little new information.

- Positive factor: QA/QC procedures disclosed

- Positive factor: Compositing parameters transparent

- Negative factor: Very low zinc grade

- Negative factor: Result is previously reported, low novelty

Evidence · table

> 0.02

Context: 44.0

#### Tags used in scoring

**Nearology Play**

Polarity: neutral

Definition: Value premise rests on proximity to a known deposit rather than own results.

Why it applies: proximity is offered as the value premise: "1 A N N O U N C E M E N T QMINES DISCOVERS COPPER SULPHIDES 180M BEYOND MT CHALMERS RESOURCE HIGHLIGHTS • New Copper Dis"

#### Rejected tags

**Stale Data Re-release** — Rejected; excluded from scoring

Polarity: negative

Definition: Historical results re-announced with no new assays or reinterpretation — low genuine novelty.

Reason: The intercept is explicitly marked as 'Previously reported' in the table.

Evidence · table

> Previously reported

Context: 26MCRD005

**QA/QC Disclosed** — Rejected; excluded from scoring

Polarity: positive

Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\).

Reason: The JORC table details internal QA/QC review by QMines technical personnel and the Competent Person.

Evidence · text

> Drilling, logging, sampling, assay and QAQC data were internally reviewed by QMines technical personnel and the Competent Person.

**Compositing Transparent** — Rejected; excluded from scoring

Polarity: positive

Definition: Cut-off grade and internal dilution rules are clearly stated for reported intervals.

Reason: The table specifies a 0.20% Cu lower cut off and maximum 2m internal dilution for the reported intercepts.

Evidence · text

> 0.20% Cu lower cut off, maximum 2m internal dilution.

### 26MCRD005

[Link to this fact](https://atlas-staging.minestarters.com/news/qml-copper-discovery-at-mt-chalmers--fe382ad6-14fe-48fd-abdf-bcef62bdf4fa#fact-drill-facts-52)

Mt Chalmers West · silver

Historical result

Needs review: historical\_restatement

#### Identity

- Hole ID: 26MCRD005
- Project: Mt Chalmers West
- Commodity: silver
- Region: australia\_qld
- Reported Region: australia\_qld
- Ticker: QML

#### Geometry

- Grade: 2.3
- Grade Unit: g/t
- Intercept: 44 m
- From: 103 m
- To: 147 m
- Hole Depth: 156.1 m
- Intercept Depth: 103 m

#### Classification

- Deposit Type: vms
- Program: exploration
- Sample Type: drill
- Group ID: 26MCRD005:103-147
- Mining Method: unknown

#### Location

- Easting: 260074
- Northing: 7421304
- CRS: UTM
- Elevation: 125.6 m
- Azimuth: 143 °
- Dip: -75 °
- Loc. Confidence: high
- Loc. Source: document

#### QA/QC

- Laboratory: ALS Brisbane
- QA/QC Disclosed: Yes
- QP Signed: Yes

#### Deleterious

- Deleterious Flag: No

#### Compositing

- Cutoff Grade: 0.2
- Cutoff Unit: % Cu
- Dilution Disclosed: Yes
- Max Dilution: 2 m

#### Review

- Needs Review: Yes
- Review Reason: historical\_restatement
- Interp. Status: scored
- Historical: Yes

#### Dates

- Event date: 2026-10-11T00:00:00.000Z

Reasoning: This previously reported silver intercept shows a very low grade over a significant width, contributing little new information.

- Positive factor: QA/QC procedures disclosed

- Positive factor: Compositing parameters transparent

- Negative factor: Very low silver grade

- Negative factor: Result is previously reported, low novelty

Evidence · table

> 2.3

Context: 44.0

#### Tags used in scoring

**Nearology Play**

Polarity: neutral

Definition: Value premise rests on proximity to a known deposit rather than own results.

Why it applies: proximity is offered as the value premise: "1 A N N O U N C E M E N T QMINES DISCOVERS COPPER SULPHIDES 180M BEYOND MT CHALMERS RESOURCE HIGHLIGHTS • New Copper Dis"

#### Rejected tags

**Stale Data Re-release** — Rejected; excluded from scoring

Polarity: negative

Definition: Historical results re-announced with no new assays or reinterpretation — low genuine novelty.

Reason: The intercept is explicitly marked as 'Previously reported' in the table.

Evidence · table

> Previously reported

Context: 26MCRD005

**QA/QC Disclosed** — Rejected; excluded from scoring

Polarity: positive

Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\).

Reason: The JORC table details internal QA/QC review by QMines technical personnel and the Competent Person.

Evidence · text

> Drilling, logging, sampling, assay and QAQC data were internally reviewed by QMines technical personnel and the Competent Person.

**Compositing Transparent** — Rejected; excluded from scoring

Polarity: positive

Definition: Cut-off grade and internal dilution rules are clearly stated for reported intervals.

Reason: The table specifies a 0.20% Cu lower cut off and maximum 2m internal dilution for the reported intercepts.

Evidence · text

> 0.20% Cu lower cut off, maximum 2m internal dilution.

### 26MCRD005

[Link to this fact](https://atlas-staging.minestarters.com/news/qml-copper-discovery-at-mt-chalmers--fe382ad6-14fe-48fd-abdf-bcef62bdf4fa#fact-drill-facts-53)

Mt Chalmers West · copper

Historical result

Needs review: historical\_restatement

#### Identity

- Hole ID: 26MCRD005
- Project: Mt Chalmers West
- Commodity: copper
- Region: australia\_qld
- Reported Region: australia\_qld
- Ticker: QML

#### Geometry

- Grade: 2.2
- Grade Unit: %
- Intercept: 10 m
- From: 103 m
- To: 113 m
- Hole Depth: 156.1 m
- Intercept Depth: 103 m

#### Classification

- Deposit Type: vms
- Program: exploration
- Sample Type: drill
- Group ID: 26MCRD005:103-113
- Mining Method: unknown

#### Location

- Easting: 260074
- Northing: 7421304
- CRS: UTM
- Elevation: 125.6 m
- Azimuth: 143 °
- Dip: -75 °
- Loc. Confidence: high
- Loc. Source: document

#### QA/QC

- Laboratory: ALS Brisbane
- QA/QC Disclosed: Yes
- QP Signed: Yes

#### Deleterious

- Deleterious Flag: No

#### Compositing

- Cutoff Grade: 0.2
- Cutoff Unit: % Cu
- Dilution Disclosed: Yes
- Max Dilution: 2 m

#### Review

- Needs Review: Yes
- Review Reason: historical\_restatement
- Interp. Status: scored
- Historical: Yes

#### Dates

- Event date: 2026-10-11T00:00:00.000Z

Reasoning: This previously reported sub-interval shows a strong copper grade over a moderate width, indicating good mineralization, but has low novelty.

- Positive factor: Strong copper grade for VMS deposit type

- Positive factor: Moderate intercept length \(10m\)

- Positive factor: QA/QC procedures disclosed

- Positive factor: Compositing parameters transparent

- Negative factor: Result is previously reported, low novelty

Evidence · table

> 2.20

Context: 10.0

#### Tags used in scoring

**Nearology Play**

Polarity: neutral

Definition: Value premise rests on proximity to a known deposit rather than own results.

Why it applies: proximity is offered as the value premise: "1 A N N O U N C E M E N T QMINES DISCOVERS COPPER SULPHIDES 180M BEYOND MT CHALMERS RESOURCE HIGHLIGHTS • New Copper Dis"

#### Rejected tags

**Stale Data Re-release** — Rejected; excluded from scoring

Polarity: negative

Definition: Historical results re-announced with no new assays or reinterpretation — low genuine novelty.

Reason: The intercept is explicitly marked as 'Previously reported' in the table.

Evidence · table

> Previously reported

Context: 26MCRD005

**QA/QC Disclosed** — Rejected; excluded from scoring

Polarity: positive

Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\).

Reason: The JORC table details internal QA/QC review by QMines technical personnel and the Competent Person.

Evidence · text

> Drilling, logging, sampling, assay and QAQC data were internally reviewed by QMines technical personnel and the Competent Person.

**Compositing Transparent** — Rejected; excluded from scoring

Polarity: positive

Definition: Cut-off grade and internal dilution rules are clearly stated for reported intervals.

Reason: The table specifies a 0.20% Cu lower cut off and maximum 2m internal dilution for the reported intercepts.

Evidence · text

> 0.20% Cu lower cut off, maximum 2m internal dilution.

### 26MCRD005

[Link to this fact](https://atlas-staging.minestarters.com/news/qml-copper-discovery-at-mt-chalmers--fe382ad6-14fe-48fd-abdf-bcef62bdf4fa#fact-drill-facts-54)

Mt Chalmers West · gold

Historical result

Needs review: historical\_restatement

#### Identity

- Hole ID: 26MCRD005
- Project: Mt Chalmers West
- Commodity: gold
- Region: australia\_qld
- Reported Region: australia\_qld
- Ticker: QML

#### Geometry

- Grade: 0.35
- Grade Unit: g/t
- Intercept: 10 m
- From: 103 m
- To: 113 m
- Hole Depth: 156.1 m
- Intercept Depth: 103 m

#### Classification

- Deposit Type: vms
- Program: exploration
- Sample Type: drill
- Group ID: 26MCRD005:103-113
- Mining Method: unknown

#### Location

- Easting: 260074
- Northing: 7421304
- CRS: UTM
- Elevation: 125.6 m
- Azimuth: 143 °
- Dip: -75 °
- Loc. Confidence: high
- Loc. Source: document

#### QA/QC

- Laboratory: ALS Brisbane
- QA/QC Disclosed: Yes
- QP Signed: Yes

#### Deleterious

- Deleterious Flag: No

#### Compositing

- Cutoff Grade: 0.2
- Cutoff Unit: % Cu
- Dilution Disclosed: Yes
- Max Dilution: 2 m

#### Review

- Needs Review: Yes
- Review Reason: historical\_restatement
- Interp. Status: scored
- Historical: Yes

#### Dates

- Event date: 2026-10-11T00:00:00.000Z

Reasoning: This previously reported sub-interval shows a weak gold grade over a moderate width, but has low novelty.

- Positive factor: QA/QC procedures disclosed

- Positive factor: Compositing parameters transparent

- Negative factor: Result is previously reported, low novelty

Evidence · table

> 0.35

Context: 10.0

#### Tags used in scoring

**Nearology Play**

Polarity: neutral

Definition: Value premise rests on proximity to a known deposit rather than own results.

Why it applies: proximity is offered as the value premise: "1 A N N O U N C E M E N T QMINES DISCOVERS COPPER SULPHIDES 180M BEYOND MT CHALMERS RESOURCE HIGHLIGHTS • New Copper Dis"

#### Rejected tags

**Stale Data Re-release** — Rejected; excluded from scoring

Polarity: negative

Definition: Historical results re-announced with no new assays or reinterpretation — low genuine novelty.

Reason: The intercept is explicitly marked as 'Previously reported' in the table.

Evidence · table

> Previously reported

Context: 26MCRD005

**QA/QC Disclosed** — Rejected; excluded from scoring

Polarity: positive

Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\).

Reason: The JORC table details internal QA/QC review by QMines technical personnel and the Competent Person.

Evidence · text

> Drilling, logging, sampling, assay and QAQC data were internally reviewed by QMines technical personnel and the Competent Person.

**Compositing Transparent** — Rejected; excluded from scoring

Polarity: positive

Definition: Cut-off grade and internal dilution rules are clearly stated for reported intervals.

Reason: The table specifies a 0.20% Cu lower cut off and maximum 2m internal dilution for the reported intercepts.

Evidence · text

> 0.20% Cu lower cut off, maximum 2m internal dilution.

### 26MCRD005

[Link to this fact](https://atlas-staging.minestarters.com/news/qml-copper-discovery-at-mt-chalmers--fe382ad6-14fe-48fd-abdf-bcef62bdf4fa#fact-drill-facts-55)

Mt Chalmers West · zinc

Historical result

Needs review: historical\_restatement

#### Identity

- Hole ID: 26MCRD005
- Project: Mt Chalmers West
- Commodity: zinc
- Region: australia\_qld
- Reported Region: australia\_qld
- Ticker: QML

#### Geometry

- Grade: 0.03
- Grade Unit: %
- Intercept: 10 m
- From: 103 m
- To: 113 m
- Hole Depth: 156.1 m
- Intercept Depth: 103 m

#### Classification

- Deposit Type: vms
- Program: exploration
- Sample Type: drill
- Group ID: 26MCRD005:103-113
- Mining Method: unknown

#### Location

- Easting: 260074
- Northing: 7421304
- CRS: UTM
- Elevation: 125.6 m
- Azimuth: 143 °
- Dip: -75 °
- Loc. Confidence: high
- Loc. Source: document

#### QA/QC

- Laboratory: ALS Brisbane
- QA/QC Disclosed: Yes
- QP Signed: Yes

#### Deleterious

- Deleterious Flag: No

#### Compositing

- Cutoff Grade: 0.2
- Cutoff Unit: % Cu
- Dilution Disclosed: Yes
- Max Dilution: 2 m

#### Review

- Needs Review: Yes
- Review Reason: historical\_restatement
- Interp. Status: scored
- Historical: Yes

#### Dates

- Event date: 2026-10-11T00:00:00.000Z

Reasoning: This previously reported sub-interval shows a very low zinc grade over a moderate width, contributing little new information.

- Positive factor: QA/QC procedures disclosed

- Positive factor: Compositing parameters transparent

- Negative factor: Very low zinc grade

- Negative factor: Result is previously reported, low novelty

Evidence · table

> 0.03

Context: 10.0

#### Tags used in scoring

**Nearology Play**

Polarity: neutral

Definition: Value premise rests on proximity to a known deposit rather than own results.

Why it applies: proximity is offered as the value premise: "1 A N N O U N C E M E N T QMINES DISCOVERS COPPER SULPHIDES 180M BEYOND MT CHALMERS RESOURCE HIGHLIGHTS • New Copper Dis"

#### Rejected tags

**Stale Data Re-release** — Rejected; excluded from scoring

Polarity: negative

Definition: Historical results re-announced with no new assays or reinterpretation — low genuine novelty.

Reason: The intercept is explicitly marked as 'Previously reported' in the table.

Evidence · table

> Previously reported

Context: 26MCRD005

**QA/QC Disclosed** — Rejected; excluded from scoring

Polarity: positive

Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\).

Reason: The JORC table details internal QA/QC review by QMines technical personnel and the Competent Person.

Evidence · text

> Drilling, logging, sampling, assay and QAQC data were internally reviewed by QMines technical personnel and the Competent Person.

**Compositing Transparent** — Rejected; excluded from scoring

Polarity: positive

Definition: Cut-off grade and internal dilution rules are clearly stated for reported intervals.

Reason: The table specifies a 0.20% Cu lower cut off and maximum 2m internal dilution for the reported intercepts.

Evidence · text

> 0.20% Cu lower cut off, maximum 2m internal dilution.

### 26MCRD005

[Link to this fact](https://atlas-staging.minestarters.com/news/qml-copper-discovery-at-mt-chalmers--fe382ad6-14fe-48fd-abdf-bcef62bdf4fa#fact-drill-facts-56)

Mt Chalmers West · silver

Historical result

Needs review: historical\_restatement

#### Identity

- Hole ID: 26MCRD005
- Project: Mt Chalmers West
- Commodity: silver
- Region: australia\_qld
- Reported Region: australia\_qld
- Ticker: QML

#### Geometry

- Grade: 4.7
- Grade Unit: g/t
- Intercept: 10 m
- From: 103 m
- To: 113 m
- Hole Depth: 156.1 m
- Intercept Depth: 103 m

#### Classification

- Deposit Type: vms
- Program: exploration
- Sample Type: drill
- Group ID: 26MCRD005:103-113
- Mining Method: unknown

#### Location

- Easting: 260074
- Northing: 7421304
- CRS: UTM
- Elevation: 125.6 m
- Azimuth: 143 °
- Dip: -75 °
- Loc. Confidence: high
- Loc. Source: document

#### QA/QC

- Laboratory: ALS Brisbane
- QA/QC Disclosed: Yes
- QP Signed: Yes

#### Deleterious

- Deleterious Flag: No

#### Compositing

- Cutoff Grade: 0.2
- Cutoff Unit: % Cu
- Dilution Disclosed: Yes
- Max Dilution: 2 m

#### Review

- Needs Review: Yes
- Review Reason: historical\_restatement
- Interp. Status: scored
- Historical: Yes

#### Dates

- Event date: 2026-10-11T00:00:00.000Z

Reasoning: This previously reported sub-interval shows a very low silver grade over a moderate width, contributing little new information.

- Positive factor: QA/QC procedures disclosed

- Positive factor: Compositing parameters transparent

- Negative factor: Very low silver grade

- Negative factor: Result is previously reported, low novelty

Evidence · table

> 4.7

Context: 10.0

#### Tags used in scoring

**Nearology Play**

Polarity: neutral

Definition: Value premise rests on proximity to a known deposit rather than own results.

Why it applies: proximity is offered as the value premise: "1 A N N O U N C E M E N T QMINES DISCOVERS COPPER SULPHIDES 180M BEYOND MT CHALMERS RESOURCE HIGHLIGHTS • New Copper Dis"

#### Rejected tags

**Stale Data Re-release** — Rejected; excluded from scoring

Polarity: negative

Definition: Historical results re-announced with no new assays or reinterpretation — low genuine novelty.

Reason: The intercept is explicitly marked as 'Previously reported' in the table.

Evidence · table

> Previously reported

Context: 26MCRD005

**QA/QC Disclosed** — Rejected; excluded from scoring

Polarity: positive

Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\).

Reason: The JORC table details internal QA/QC review by QMines technical personnel and the Competent Person.

Evidence · text

> Drilling, logging, sampling, assay and QAQC data were internally reviewed by QMines technical personnel and the Competent Person.

**Compositing Transparent** — Rejected; excluded from scoring

Polarity: positive

Definition: Cut-off grade and internal dilution rules are clearly stated for reported intervals.

Reason: The table specifies a 0.20% Cu lower cut off and maximum 2m internal dilution for the reported intercepts.

Evidence · text

> 0.20% Cu lower cut off, maximum 2m internal dilution.

## How Atlas produces this analysis

Minestarters Atlas uses automated extraction to summarize mining announcements, identify reported measurements, and classify supporting evidence. Sentiment reflects the extracted narrative and classification rules; it is an interpretation, not a reported measurement. Evidence quotes and context are provided where available. Missing data, low-confidence results, and review flags indicate limitations. Check the original publisher announcement before relying on an interpretation.