QML: Copper Discovery at Mt Chalmers
Original announcement by asx on
- Company
- QMines Limited
- Ticker
- QML
- Exchange
- ASX
- Region
- Queensland
- Primary commodity
- Copper
- Secondary commodities
- Gold, Zinc, Lead, Silver, Sulfur
- Document categories
- Other, Drill results, Resource update
- Extracted
- 2026-10-11 23:26:37 UTC
Analysis by Minestarters Atlas
Atlas analysis published:
Minestarters Atlas analysis
Summary
QMines Limited has announced a new copper sulphide discovery in drillhole 26MCDD052 at its Mt Chalmers project, located 180m beyond the existing resource. The hole intersected 11m of visually identified chalcopyrite-pyrite mineralisation, suggesting potential for significant resource growth and additional massive sulphide lenses. However, the company cautions that these are visual estimates, and metal grades, true width, and continuity remain unknown pending laboratory assays expected in late October 2026.
Reasoning: QMines Limited has announced a new visual discovery of copper sulphides 180m beyond the existing Mt Chalmers resource, indicating significant exploration potential. However, the lack of assay results and true width information means the economic significance is currently unknown, and assays are pending.
Positive factors
- New visual discovery of copper sulphides 180m beyond existing resource
- Indicates potential for significant resource growth and additional massive sulphide lenses
- Strategic land acquisitions enabled access to new exploration area
- Discovery supports further exploration of interpreted 4km corridor
Negative factors
- Discovery is based on visual estimates only, no assays or grades available
- True width of mineralisation is unknown
- Continuity of mineralisation not yet established
- Economic significance of the visual intercept is unknown pending assays
Low confidence — this extraction should be reviewed alongside the original source.
Facts used in scoring: 57
Extracted facts
Stored fact records: 57. Some facts used in scoring do not have a stored record.
Drill Results (57)
26MCDD052Mt Chalmers West · copperIntercept: 11 mView all detailsHide details
Identity
- Hole ID
- 26MCDD052
- Project
- Mt Chalmers West
- Commodity
- copper
- Region
- australia_qld
- Reported Region
- australia_qld
- Ticker
- QML
Geometry
- Intercept
- 11 m
- From
- 192.15 m
- To
- 203 m
- Hole Depth
- 255.5 m
- Intercept Depth
- 192.15 m
Classification
- Deposit Type
- vms
- Program
- exploration
- Sample Type
- drill
- Group ID
- 26MCDD052:192.15-203
- Mining Method
- unknown
Location
- Easting
- 260219.998
- Northing
- 7421837.418
- CRS
- UTM
- Elevation
- 100.235 m
- Azimuth
- 59.25 °
- Dip
- -60.81 °
- Loc. Confidence
- medium
- Loc. Source
- document
QA/QC
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
Deleterious
- Deleterious Flag
- No
Compositing
- Dilution Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-10-11T00:00:00.000Z
Reasoning: A new visual discovery of 11m of copper sulphides in hole 26MCDD052, 180m beyond the existing resource, is a positive exploration signal, but the lack of assay results and true width information limits confidence in its economic potential.
Positive factors
- New visual discovery extends mineralisation beyond current resource
- Indicates potential for significant resource growth
- Opens new exploration target in previously untested ground
Negative factors
- Visual estimates only, no assays or grades available
- True width unknown
- Continuity not established
- Economic significance unknown
Evidence · text
“Drillhole 26MCDD052 intersects 11m of visually identified copper sulphides”
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "1 A N N O U N C E M E N T QMINES DISCOVERS COPPER SULPHIDES 180M BEYOND MT CHALMERS RESOURCE HIGHLIGHTS • New Copper Dis"
Rejected tags
Rejected tags — excluded from scoring because their label or evidence could not be verified.
Apparent Width OnlyRejected · negative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Reason: The document explicitly states that all reported lengths are downhole and true widths are unknown.
Evidence · text
“All reported lengths are downhole; true widths are unknown.”
Visual Estimate OnlyRejected · negative · Story-specific tag
No canonical definition is currently available.
Reason: The discovery is based on visually identified copper sulphides, with no laboratory assays reported.
Evidence · text
“Drillhole 26MCDD052 intersects 11m of visually identified copper sulphides”
Step-Out ExtensionRejected · positive
Mineralization extended beyond the previously known limit.
Reason: The discovery is located 180m beyond the existing Mt Chalmers Resource, indicating an extension of potential mineralisation.
Evidence · text
“New Copper Discovery 180m Beyond Resource”
2026_GT03Mt Chalmers West · copperGrade: 0.1Grade Unit: %Intercept: 3 mHistorical resultNeeds review: historical_restatementView all detailsHide details
Identity
- Hole ID
- 2026_GT03
- Project
- Mt Chalmers West
- Commodity
- copper
- Region
- australia_qld
- Reported Region
- australia_qld
- Ticker
- QML
Geometry
- Grade
- 0.1
- Grade Unit
- %
- Intercept
- 3 m
- From
- 48 m
- To
- 51 m
- Hole Depth
- 75.5 m
- Intercept Depth
- 48 m
Classification
- Deposit Type
- vms
- Program
- exploration
- Sample Type
- drill
- Group ID
- 2026_GT03:48-51
- Mining Method
- unknown
Location
- Easting
- 259846
- Northing
- 7421069
- CRS
- UTM
- Elevation
- 106.3 m
- Azimuth
- 175 °
- Dip
- -85 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Brisbane
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
Deleterious
- Deleterious Flag
- No
Compositing
- Cutoff Grade
- 0.2
- Cutoff Unit
- % Cu
- Dilution Disclosed
- Yes
- Max Dilution
- 2 m
Review
- Needs Review
- Yes
- Review Reason
- historical_restatement
- Interp. Status
- scored
- Historical
- Yes
Dates
- Event date
- 2026-10-11T00:00:00.000Z
Reasoning: This previously reported copper intercept is below the stated cutoff grade for the table, indicating low economic significance, and has low novelty.
Positive factors
- QA/QC procedures disclosed
- Compositing parameters transparent
Negative factors
- Grade is below the table's stated cutoff of 0.20% Cu
- Result is previously reported, low novelty
Evidence · table
“0.10”
Context: 3.0
Tags used in scoring
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "1 A N N O U N C E M E N T QMINES DISCOVERS COPPER SULPHIDES 180M BEYOND MT CHALMERS RESOURCE HIGHLIGHTS • New Copper Dis"
Rejected tags
Rejected tags — excluded from scoring because their label or evidence could not be verified.
Stale Data Re-releaseRejected · negative
Historical results re-announced with no new assays or reinterpretation — low genuine novelty.
Reason: The intercept is explicitly marked as 'Previously reported' in the table.
Evidence · table
“Previously reported”
Context: 2026_GT03
QA/QC DisclosedRejected · positive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Reason: The JORC table details internal QA/QC review by QMines technical personnel and the Competent Person.
Evidence · text
“Drilling, logging, sampling, assay and QAQC data were internally reviewed by QMines technical personnel and the Competent Person.”
Compositing TransparentRejected · positive
Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Reason: The table specifies a 0.20% Cu lower cut off and maximum 2m internal dilution for the reported intercepts.
Evidence · text
“0.20% Cu lower cut off, maximum 2m internal dilution.”
2026_GT03Mt Chalmers West · goldGrade: 0.3Grade Unit: g/tIntercept: 3 mHistorical resultNeeds review: historical_restatementView all detailsHide details
Identity
- Hole ID
- 2026_GT03
- Project
- Mt Chalmers West
- Commodity
- gold
- Region
- australia_qld
- Reported Region
- australia_qld
- Ticker
- QML
Geometry
- Grade
- 0.3
- Grade Unit
- g/t
- Intercept
- 3 m
- From
- 48 m
- To
- 51 m
- Hole Depth
- 75.5 m
- Intercept Depth
- 48 m
Classification
- Deposit Type
- vms
- Program
- exploration
- Sample Type
- drill
- Group ID
- 2026_GT03:48-51
- Mining Method
- unknown
Location
- Easting
- 259846
- Northing
- 7421069
- CRS
- UTM
- Elevation
- 106.3 m
- Azimuth
- 175 °
- Dip
- -85 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Brisbane
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
Deleterious
- Deleterious Flag
- No
Compositing
- Cutoff Grade
- 0.2
- Cutoff Unit
- % Cu
- Dilution Disclosed
- Yes
- Max Dilution
- 2 m
Review
- Needs Review
- Yes
- Review Reason
- historical_restatement
- Interp. Status
- scored
- Historical
- Yes
Dates
- Event date
- 2026-10-11T00:00:00.000Z
Reasoning: This previously reported gold intercept shows a weak grade over a narrow width, contributing little new information.
Positive factors
- QA/QC procedures disclosed
- Compositing parameters transparent
Negative factors
- Result is previously reported, low novelty
Evidence · table
“0.30”
Context: 3.0
Tags used in scoring
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "1 A N N O U N C E M E N T QMINES DISCOVERS COPPER SULPHIDES 180M BEYOND MT CHALMERS RESOURCE HIGHLIGHTS • New Copper Dis"
Rejected tags
Rejected tags — excluded from scoring because their label or evidence could not be verified.
Stale Data Re-releaseRejected · negative
Historical results re-announced with no new assays or reinterpretation — low genuine novelty.
Reason: The intercept is explicitly marked as 'Previously reported' in the table.
Evidence · table
“Previously reported”
Context: 2026_GT03
QA/QC DisclosedRejected · positive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Reason: The JORC table details internal QA/QC review by QMines technical personnel and the Competent Person.
Evidence · text
“Drilling, logging, sampling, assay and QAQC data were internally reviewed by QMines technical personnel and the Competent Person.”
Compositing TransparentRejected · positive
Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Reason: The table specifies a 0.20% Cu lower cut off and maximum 2m internal dilution for the reported intercepts.
Evidence · text
“0.20% Cu lower cut off, maximum 2m internal dilution.”
2026_GT03Mt Chalmers West · zincGrade: 1.9Grade Unit: %Intercept: 3 mHistorical resultNeeds review: historical_restatementView all detailsHide details
Identity
- Hole ID
- 2026_GT03
- Project
- Mt Chalmers West
- Commodity
- zinc
- Region
- australia_qld
- Reported Region
- australia_qld
- Ticker
- QML
Geometry
- Grade
- 1.9
- Grade Unit
- %
- Intercept
- 3 m
- From
- 48 m
- To
- 51 m
- Hole Depth
- 75.5 m
- Intercept Depth
- 48 m
Classification
- Deposit Type
- vms
- Program
- exploration
- Sample Type
- drill
- Group ID
- 2026_GT03:48-51
- Mining Method
- unknown
Location
- Easting
- 259846
- Northing
- 7421069
- CRS
- UTM
- Elevation
- 106.3 m
- Azimuth
- 175 °
- Dip
- -85 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Brisbane
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
Deleterious
- Deleterious Flag
- No
Compositing
- Cutoff Grade
- 0.2
- Cutoff Unit
- % Cu
- Dilution Disclosed
- Yes
- Max Dilution
- 2 m
Review
- Needs Review
- Yes
- Review Reason
- historical_restatement
- Interp. Status
- scored
- Historical
- Yes
Dates
- Event date
- 2026-10-11T00:00:00.000Z
Reasoning: This previously reported zinc intercept shows a weak grade over a narrow width, contributing little new information.
Positive factors
- QA/QC procedures disclosed
- Compositing parameters transparent
Negative factors
- Result is previously reported, low novelty
Evidence · table
“1.90”
Context: 3.0
Tags used in scoring
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "1 A N N O U N C E M E N T QMINES DISCOVERS COPPER SULPHIDES 180M BEYOND MT CHALMERS RESOURCE HIGHLIGHTS • New Copper Dis"
Rejected tags
Rejected tags — excluded from scoring because their label or evidence could not be verified.
Stale Data Re-releaseRejected · negative
Historical results re-announced with no new assays or reinterpretation — low genuine novelty.
Reason: The intercept is explicitly marked as 'Previously reported' in the table.
Evidence · table
“Previously reported”
Context: 2026_GT03
QA/QC DisclosedRejected · positive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Reason: The JORC table details internal QA/QC review by QMines technical personnel and the Competent Person.
Evidence · text
“Drilling, logging, sampling, assay and QAQC data were internally reviewed by QMines technical personnel and the Competent Person.”
Compositing TransparentRejected · positive
Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Reason: The table specifies a 0.20% Cu lower cut off and maximum 2m internal dilution for the reported intercepts.
Evidence · text
“0.20% Cu lower cut off, maximum 2m internal dilution.”
2026_GT03Mt Chalmers West · leadGrade: 0.8Grade Unit: %Intercept: 3 mHistorical resultNeeds review: historical_restatementView all detailsHide details
Identity
- Hole ID
- 2026_GT03
- Project
- Mt Chalmers West
- Commodity
- lead
- Region
- australia_qld
- Reported Region
- australia_qld
- Ticker
- QML
Geometry
- Grade
- 0.8
- Grade Unit
- %
- Intercept
- 3 m
- From
- 48 m
- To
- 51 m
- Hole Depth
- 75.5 m
- Intercept Depth
- 48 m
Classification
- Deposit Type
- vms
- Program
- exploration
- Sample Type
- drill
- Group ID
- 2026_GT03:48-51
- Mining Method
- unknown
Location
- Easting
- 259846
- Northing
- 7421069
- CRS
- UTM
- Elevation
- 106.3 m
- Azimuth
- 175 °
- Dip
- -85 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Brisbane
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
Deleterious
- Deleterious Flag
- No
Compositing
- Cutoff Grade
- 0.2
- Cutoff Unit
- % Cu
- Dilution Disclosed
- Yes
- Max Dilution
- 2 m
Review
- Needs Review
- Yes
- Review Reason
- historical_restatement
- Interp. Status
- scored
- Historical
- Yes
Dates
- Event date
- 2026-10-11T00:00:00.000Z
Reasoning: This previously reported lead intercept shows a weak grade over a narrow width, contributing little new information.
Positive factors
- QA/QC procedures disclosed
- Compositing parameters transparent
Negative factors
- Result is previously reported, low novelty
Evidence · table
“0.80”
Context: 3.0
Tags used in scoring
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "1 A N N O U N C E M E N T QMINES DISCOVERS COPPER SULPHIDES 180M BEYOND MT CHALMERS RESOURCE HIGHLIGHTS • New Copper Dis"
Rejected tags
Rejected tags — excluded from scoring because their label or evidence could not be verified.
Stale Data Re-releaseRejected · negative
Historical results re-announced with no new assays or reinterpretation — low genuine novelty.
Reason: The intercept is explicitly marked as 'Previously reported' in the table.
Evidence · table
“Previously reported”
Context: 2026_GT03
QA/QC DisclosedRejected · positive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Reason: The JORC table details internal QA/QC review by QMines technical personnel and the Competent Person.
Evidence · text
“Drilling, logging, sampling, assay and QAQC data were internally reviewed by QMines technical personnel and the Competent Person.”
Compositing TransparentRejected · positive
Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Reason: The table specifies a 0.20% Cu lower cut off and maximum 2m internal dilution for the reported intercepts.
Evidence · text
“0.20% Cu lower cut off, maximum 2m internal dilution.”
2026_GT03Mt Chalmers West · silverGrade: 16Grade Unit: g/tIntercept: 3 mHistorical resultNeeds review: historical_restatementView all detailsHide details
Identity
- Hole ID
- 2026_GT03
- Project
- Mt Chalmers West
- Commodity
- silver
- Region
- australia_qld
- Reported Region
- australia_qld
- Ticker
- QML
Geometry
- Grade
- 16
- Grade Unit
- g/t
- Intercept
- 3 m
- From
- 48 m
- To
- 51 m
- Hole Depth
- 75.5 m
- Intercept Depth
- 48 m
Classification
- Deposit Type
- vms
- Program
- exploration
- Sample Type
- drill
- Group ID
- 2026_GT03:48-51
- Mining Method
- unknown
Location
- Easting
- 259846
- Northing
- 7421069
- CRS
- UTM
- Elevation
- 106.3 m
- Azimuth
- 175 °
- Dip
- -85 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Brisbane
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
Deleterious
- Deleterious Flag
- No
Compositing
- Cutoff Grade
- 0.2
- Cutoff Unit
- % Cu
- Dilution Disclosed
- Yes
- Max Dilution
- 2 m
Review
- Needs Review
- Yes
- Review Reason
- historical_restatement
- Interp. Status
- scored
- Historical
- Yes
Dates
- Event date
- 2026-10-11T00:00:00.000Z
Reasoning: This previously reported silver intercept shows a weak grade over a narrow width, contributing little new information.
Positive factors
- QA/QC procedures disclosed
- Compositing parameters transparent
Negative factors
- Result is previously reported, low novelty
Evidence · table
“16”
Context: 3.0
Tags used in scoring
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "1 A N N O U N C E M E N T QMINES DISCOVERS COPPER SULPHIDES 180M BEYOND MT CHALMERS RESOURCE HIGHLIGHTS • New Copper Dis"
Rejected tags
Rejected tags — excluded from scoring because their label or evidence could not be verified.
Stale Data Re-releaseRejected · negative
Historical results re-announced with no new assays or reinterpretation — low genuine novelty.
Reason: The intercept is explicitly marked as 'Previously reported' in the table.
Evidence · table
“Previously reported”
Context: 2026_GT03
QA/QC DisclosedRejected · positive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Reason: The JORC table details internal QA/QC review by QMines technical personnel and the Competent Person.
Evidence · text
“Drilling, logging, sampling, assay and QAQC data were internally reviewed by QMines technical personnel and the Competent Person.”
Compositing TransparentRejected · positive
Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Reason: The table specifies a 0.20% Cu lower cut off and maximum 2m internal dilution for the reported intercepts.
Evidence · text
“0.20% Cu lower cut off, maximum 2m internal dilution.”
26MCRD002Mt Chalmers West · copperGrade: 0.43Grade Unit: %Intercept: 1 mHistorical resultNeeds review: historical_restatementView all detailsHide details
Identity
- Hole ID
- 26MCRD002
- Project
- Mt Chalmers West
- Commodity
- copper
- Region
- australia_qld
- Reported Region
- australia_qld
- Ticker
- QML
Geometry
- Grade
- 0.43
- Grade Unit
- %
- Intercept
- 1 m
- From
- 90 m
- To
- 91 m
- Hole Depth
- 211.5 m
- Intercept Depth
- 90 m
Classification
- Deposit Type
- vms
- Program
- exploration
- Sample Type
- drill
- Group ID
- 26MCRD002:90-91
- Mining Method
- unknown
Location
- Easting
- 260013
- Northing
- 7421420
- CRS
- UTM
- Elevation
- 125.3 m
- Azimuth
- 240 °
- Dip
- -75.1 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Brisbane
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
Deleterious
- Deleterious Flag
- No
Compositing
- Cutoff Grade
- 0.2
- Cutoff Unit
- % Cu
- Dilution Disclosed
- Yes
- Max Dilution
- 2 m
Review
- Needs Review
- Yes
- Review Reason
- historical_restatement
- Interp. Status
- scored
- Historical
- Yes
Dates
- Event date
- 2026-10-11T00:00:00.000Z
Reasoning: This previously reported copper intercept shows a weak grade over a narrow width, contributing little new information.
Positive factors
- QA/QC procedures disclosed
- Compositing parameters transparent
Negative factors
- Result is previously reported, low novelty
Evidence · table
“0.43”
Context: 1
Tags used in scoring
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "1 A N N O U N C E M E N T QMINES DISCOVERS COPPER SULPHIDES 180M BEYOND MT CHALMERS RESOURCE HIGHLIGHTS • New Copper Dis"
Rejected tags
Rejected tags — excluded from scoring because their label or evidence could not be verified.
Stale Data Re-releaseRejected · negative
Historical results re-announced with no new assays or reinterpretation — low genuine novelty.
Reason: The intercept is explicitly marked as 'Previously reported' in the table.
Evidence · table
“Previously reported”
Context: 26MCRD002
QA/QC DisclosedRejected · positive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Reason: The JORC table details internal QA/QC review by QMines technical personnel and the Competent Person.
Evidence · text
“Drilling, logging, sampling, assay and QAQC data were internally reviewed by QMines technical personnel and the Competent Person.”
Compositing TransparentRejected · positive
Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Reason: The table specifies a 0.20% Cu lower cut off and maximum 2m internal dilution for the reported intercepts.
Evidence · text
“0.20% Cu lower cut off, maximum 2m internal dilution.”
26MCRD002Mt Chalmers West · goldGrade: 0.21Grade Unit: g/tIntercept: 1 mHistorical resultNeeds review: historical_restatementView all detailsHide details
Identity
- Hole ID
- 26MCRD002
- Project
- Mt Chalmers West
- Commodity
- gold
- Region
- australia_qld
- Reported Region
- australia_qld
- Ticker
- QML
Geometry
- Grade
- 0.21
- Grade Unit
- g/t
- Intercept
- 1 m
- From
- 90 m
- To
- 91 m
- Hole Depth
- 211.5 m
- Intercept Depth
- 90 m
Classification
- Deposit Type
- vms
- Program
- exploration
- Sample Type
- drill
- Group ID
- 26MCRD002:90-91
- Mining Method
- unknown
Location
- Easting
- 260013
- Northing
- 7421420
- CRS
- UTM
- Elevation
- 125.3 m
- Azimuth
- 240 °
- Dip
- -75.1 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Brisbane
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
Deleterious
- Deleterious Flag
- No
Compositing
- Cutoff Grade
- 0.2
- Cutoff Unit
- % Cu
- Dilution Disclosed
- Yes
- Max Dilution
- 2 m
Review
- Needs Review
- Yes
- Review Reason
- historical_restatement
- Interp. Status
- scored
- Historical
- Yes
Dates
- Event date
- 2026-10-11T00:00:00.000Z
Reasoning: This previously reported gold intercept shows a weak grade over a narrow width, contributing little new information.
Positive factors
- QA/QC procedures disclosed
- Compositing parameters transparent
Negative factors
- Result is previously reported, low novelty
Evidence · table
“0.21”
Context: 1
Tags used in scoring
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "1 A N N O U N C E M E N T QMINES DISCOVERS COPPER SULPHIDES 180M BEYOND MT CHALMERS RESOURCE HIGHLIGHTS • New Copper Dis"
Rejected tags
Rejected tags — excluded from scoring because their label or evidence could not be verified.
Stale Data Re-releaseRejected · negative
Historical results re-announced with no new assays or reinterpretation — low genuine novelty.
Reason: The intercept is explicitly marked as 'Previously reported' in the table.
Evidence · table
“Previously reported”
Context: 26MCRD002
QA/QC DisclosedRejected · positive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Reason: The JORC table details internal QA/QC review by QMines technical personnel and the Competent Person.
Evidence · text
“Drilling, logging, sampling, assay and QAQC data were internally reviewed by QMines technical personnel and the Competent Person.”
Compositing TransparentRejected · positive
Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Reason: The table specifies a 0.20% Cu lower cut off and maximum 2m internal dilution for the reported intercepts.
Evidence · text
“0.20% Cu lower cut off, maximum 2m internal dilution.”
26MCRD002Mt Chalmers West · zincGrade: 1.28Grade Unit: %Intercept: 1 mHistorical resultNeeds review: historical_restatementView all detailsHide details
Identity
- Hole ID
- 26MCRD002
- Project
- Mt Chalmers West
- Commodity
- zinc
- Region
- australia_qld
- Reported Region
- australia_qld
- Ticker
- QML
Geometry
- Grade
- 1.28
- Grade Unit
- %
- Intercept
- 1 m
- From
- 90 m
- To
- 91 m
- Hole Depth
- 211.5 m
- Intercept Depth
- 90 m
Classification
- Deposit Type
- vms
- Program
- exploration
- Sample Type
- drill
- Group ID
- 26MCRD002:90-91
- Mining Method
- unknown
Location
- Easting
- 260013
- Northing
- 7421420
- CRS
- UTM
- Elevation
- 125.3 m
- Azimuth
- 240 °
- Dip
- -75.1 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Brisbane
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
Deleterious
- Deleterious Flag
- No
Compositing
- Cutoff Grade
- 0.2
- Cutoff Unit
- % Cu
- Dilution Disclosed
- Yes
- Max Dilution
- 2 m
Review
- Needs Review
- Yes
- Review Reason
- historical_restatement
- Interp. Status
- scored
- Historical
- Yes
Dates
- Event date
- 2026-10-11T00:00:00.000Z
Reasoning: This previously reported zinc intercept shows a weak grade over a narrow width, contributing little new information.
Positive factors
- QA/QC procedures disclosed
- Compositing parameters transparent
Negative factors
- Result is previously reported, low novelty
Evidence · table
“1.28”
Context: 1
Tags used in scoring
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "1 A N N O U N C E M E N T QMINES DISCOVERS COPPER SULPHIDES 180M BEYOND MT CHALMERS RESOURCE HIGHLIGHTS • New Copper Dis"
Rejected tags
Rejected tags — excluded from scoring because their label or evidence could not be verified.
Stale Data Re-releaseRejected · negative
Historical results re-announced with no new assays or reinterpretation — low genuine novelty.
Reason: The intercept is explicitly marked as 'Previously reported' in the table.
Evidence · table
“Previously reported”
Context: 26MCRD002
QA/QC DisclosedRejected · positive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Reason: The JORC table details internal QA/QC review by QMines technical personnel and the Competent Person.
Evidence · text
“Drilling, logging, sampling, assay and QAQC data were internally reviewed by QMines technical personnel and the Competent Person.”
Compositing TransparentRejected · positive
Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Reason: The table specifies a 0.20% Cu lower cut off and maximum 2m internal dilution for the reported intercepts.
Evidence · text
“0.20% Cu lower cut off, maximum 2m internal dilution.”
26MCRD002Mt Chalmers West · silverGrade: 7.3Grade Unit: g/tIntercept: 1 mHistorical resultNeeds review: historical_restatementView all detailsHide details
Identity
- Hole ID
- 26MCRD002
- Project
- Mt Chalmers West
- Commodity
- silver
- Region
- australia_qld
- Reported Region
- australia_qld
- Ticker
- QML
Geometry
- Grade
- 7.3
- Grade Unit
- g/t
- Intercept
- 1 m
- From
- 90 m
- To
- 91 m
- Hole Depth
- 211.5 m
- Intercept Depth
- 90 m
Classification
- Deposit Type
- vms
- Program
- exploration
- Sample Type
- drill
- Group ID
- 26MCRD002:90-91
- Mining Method
- unknown
Location
- Easting
- 260013
- Northing
- 7421420
- CRS
- UTM
- Elevation
- 125.3 m
- Azimuth
- 240 °
- Dip
- -75.1 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Brisbane
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
Deleterious
- Deleterious Flag
- No
Compositing
- Cutoff Grade
- 0.2
- Cutoff Unit
- % Cu
- Dilution Disclosed
- Yes
- Max Dilution
- 2 m
Review
- Needs Review
- Yes
- Review Reason
- historical_restatement
- Interp. Status
- scored
- Historical
- Yes
Dates
- Event date
- 2026-10-11T00:00:00.000Z
Reasoning: This previously reported silver intercept shows a weak grade over a narrow width, contributing little new information.
Positive factors
- QA/QC procedures disclosed
- Compositing parameters transparent
Negative factors
- Result is previously reported, low novelty
Evidence · table
“7.3”
Context: 1
Tags used in scoring
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "1 A N N O U N C E M E N T QMINES DISCOVERS COPPER SULPHIDES 180M BEYOND MT CHALMERS RESOURCE HIGHLIGHTS • New Copper Dis"
Rejected tags
Rejected tags — excluded from scoring because their label or evidence could not be verified.
Stale Data Re-releaseRejected · negative
Historical results re-announced with no new assays or reinterpretation — low genuine novelty.
Reason: The intercept is explicitly marked as 'Previously reported' in the table.
Evidence · table
“Previously reported”
Context: 26MCRD002
QA/QC DisclosedRejected · positive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Reason: The JORC table details internal QA/QC review by QMines technical personnel and the Competent Person.
Evidence · text
“Drilling, logging, sampling, assay and QAQC data were internally reviewed by QMines technical personnel and the Competent Person.”
Compositing TransparentRejected · positive
Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Reason: The table specifies a 0.20% Cu lower cut off and maximum 2m internal dilution for the reported intercepts.
Evidence · text
“0.20% Cu lower cut off, maximum 2m internal dilution.”
26MCRD002Mt Chalmers West · copperGrade: 2.88Grade Unit: %Intercept: 35 mHistorical resultNeeds review: historical_restatementView all detailsHide details
Identity
- Hole ID
- 26MCRD002
- Project
- Mt Chalmers West
- Commodity
- copper
- Region
- australia_qld
- Reported Region
- australia_qld
- Ticker
- QML
Geometry
- Grade
- 2.88
- Grade Unit
- %
- Intercept
- 35 m
- From
- 107 m
- To
- 142 m
- Hole Depth
- 211.5 m
- Intercept Depth
- 107 m
Classification
- Deposit Type
- vms
- Program
- exploration
- Sample Type
- drill
- Group ID
- 26MCRD002:107-142
- Mining Method
- unknown
Location
- Easting
- 260013
- Northing
- 7421420
- CRS
- UTM
- Elevation
- 125.3 m
- Azimuth
- 240 °
- Dip
- -75.1 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Brisbane
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
Deleterious
- Deleterious Flag
- No
Compositing
- Cutoff Grade
- 0.2
- Cutoff Unit
- % Cu
- Dilution Disclosed
- Yes
- Max Dilution
- 2 m
Review
- Needs Review
- Yes
- Review Reason
- historical_restatement
- Interp. Status
- scored
- Historical
- Yes
Dates
- Event date
- 2026-10-11T00:00:00.000Z
Reasoning: This previously reported intercept shows a strong copper grade over a significant width, indicating good mineralization, but has low novelty.
Positive factors
- Strong copper grade for VMS deposit type
- Significant intercept length (35m)
- QA/QC procedures disclosed
- Compositing parameters transparent
Negative factors
- Result is previously reported, low novelty
Evidence · table
“2.88”
Context: 35
Tags used in scoring
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "1 A N N O U N C E M E N T QMINES DISCOVERS COPPER SULPHIDES 180M BEYOND MT CHALMERS RESOURCE HIGHLIGHTS • New Copper Dis"
Rejected tags
Rejected tags — excluded from scoring because their label or evidence could not be verified.
Stale Data Re-releaseRejected · negative
Historical results re-announced with no new assays or reinterpretation — low genuine novelty.
Reason: The intercept is explicitly marked as 'Previously reported' in the table.
Evidence · table
“Previously reported”
Context: 26MCRD002
QA/QC DisclosedRejected · positive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Reason: The JORC table details internal QA/QC review by QMines technical personnel and the Competent Person.
Evidence · text
“Drilling, logging, sampling, assay and QAQC data were internally reviewed by QMines technical personnel and the Competent Person.”
Compositing TransparentRejected · positive
Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Reason: The table specifies a 0.20% Cu lower cut off and maximum 2m internal dilution for the reported intercepts.
Evidence · text
“0.20% Cu lower cut off, maximum 2m internal dilution.”
26MCRD002Mt Chalmers West · goldGrade: 0.75Grade Unit: g/tIntercept: 35 mHistorical resultNeeds review: historical_restatementView all detailsHide details
Identity
- Hole ID
- 26MCRD002
- Project
- Mt Chalmers West
- Commodity
- gold
- Region
- australia_qld
- Reported Region
- australia_qld
- Ticker
- QML
Geometry
- Grade
- 0.75
- Grade Unit
- g/t
- Intercept
- 35 m
- From
- 107 m
- To
- 142 m
- Hole Depth
- 211.5 m
- Intercept Depth
- 107 m
Classification
- Deposit Type
- vms
- Program
- exploration
- Sample Type
- drill
- Group ID
- 26MCRD002:107-142
- Mining Method
- unknown
Location
- Easting
- 260013
- Northing
- 7421420
- CRS
- UTM
- Elevation
- 125.3 m
- Azimuth
- 240 °
- Dip
- -75.1 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Brisbane
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
Deleterious
- Deleterious Flag
- No
Compositing
- Cutoff Grade
- 0.2
- Cutoff Unit
- % Cu
- Dilution Disclosed
- Yes
- Max Dilution
- 2 m
Review
- Needs Review
- Yes
- Review Reason
- historical_restatement
- Interp. Status
- scored
- Historical
- Yes
Dates
- Event date
- 2026-10-11T00:00:00.000Z
Reasoning: This previously reported gold intercept shows a moderate grade over a significant width, but has low novelty.
Positive factors
- QA/QC procedures disclosed
- Compositing parameters transparent
Negative factors
- Result is previously reported, low novelty
Evidence · table
“0.75”
Context: 35
Tags used in scoring
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "1 A N N O U N C E M E N T QMINES DISCOVERS COPPER SULPHIDES 180M BEYOND MT CHALMERS RESOURCE HIGHLIGHTS • New Copper Dis"
Rejected tags
Rejected tags — excluded from scoring because their label or evidence could not be verified.
Stale Data Re-releaseRejected · negative
Historical results re-announced with no new assays or reinterpretation — low genuine novelty.
Reason: The intercept is explicitly marked as 'Previously reported' in the table.
Evidence · table
“Previously reported”
Context: 26MCRD002
QA/QC DisclosedRejected · positive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Reason: The JORC table details internal QA/QC review by QMines technical personnel and the Competent Person.
Evidence · text
“Drilling, logging, sampling, assay and QAQC data were internally reviewed by QMines technical personnel and the Competent Person.”
Compositing TransparentRejected · positive
Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Reason: The table specifies a 0.20% Cu lower cut off and maximum 2m internal dilution for the reported intercepts.
Evidence · text
“0.20% Cu lower cut off, maximum 2m internal dilution.”
26MCRD002Mt Chalmers West · zincGrade: 0.02Grade Unit: %Intercept: 35 mHistorical resultNeeds review: historical_restatementView all detailsHide details
Identity
- Hole ID
- 26MCRD002
- Project
- Mt Chalmers West
- Commodity
- zinc
- Region
- australia_qld
- Reported Region
- australia_qld
- Ticker
- QML
Geometry
- Grade
- 0.02
- Grade Unit
- %
- Intercept
- 35 m
- From
- 107 m
- To
- 142 m
- Hole Depth
- 211.5 m
- Intercept Depth
- 107 m
Classification
- Deposit Type
- vms
- Program
- exploration
- Sample Type
- drill
- Group ID
- 26MCRD002:107-142
- Mining Method
- unknown
Location
- Easting
- 260013
- Northing
- 7421420
- CRS
- UTM
- Elevation
- 125.3 m
- Azimuth
- 240 °
- Dip
- -75.1 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Brisbane
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
Deleterious
- Deleterious Flag
- No
Compositing
- Cutoff Grade
- 0.2
- Cutoff Unit
- % Cu
- Dilution Disclosed
- Yes
- Max Dilution
- 2 m
Review
- Needs Review
- Yes
- Review Reason
- historical_restatement
- Interp. Status
- scored
- Historical
- Yes
Dates
- Event date
- 2026-10-11T00:00:00.000Z
Reasoning: This previously reported zinc intercept shows a very low grade over a significant width, contributing little new information.
Positive factors
- QA/QC procedures disclosed
- Compositing parameters transparent
Negative factors
- Very low zinc grade
- Result is previously reported, low novelty
Evidence · table
“0.02”
Context: 35
Tags used in scoring
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "1 A N N O U N C E M E N T QMINES DISCOVERS COPPER SULPHIDES 180M BEYOND MT CHALMERS RESOURCE HIGHLIGHTS • New Copper Dis"
Rejected tags
Rejected tags — excluded from scoring because their label or evidence could not be verified.
Stale Data Re-releaseRejected · negative
Historical results re-announced with no new assays or reinterpretation — low genuine novelty.
Reason: The intercept is explicitly marked as 'Previously reported' in the table.
Evidence · table
“Previously reported”
Context: 26MCRD002
QA/QC DisclosedRejected · positive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Reason: The JORC table details internal QA/QC review by QMines technical personnel and the Competent Person.
Evidence · text
“Drilling, logging, sampling, assay and QAQC data were internally reviewed by QMines technical personnel and the Competent Person.”
Compositing TransparentRejected · positive
Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Reason: The table specifies a 0.20% Cu lower cut off and maximum 2m internal dilution for the reported intercepts.
Evidence · text
“0.20% Cu lower cut off, maximum 2m internal dilution.”
26MCRD002Mt Chalmers West · silverGrade: 3.3Grade Unit: g/tIntercept: 35 mHistorical resultNeeds review: historical_restatementView all detailsHide details
Identity
- Hole ID
- 26MCRD002
- Project
- Mt Chalmers West
- Commodity
- silver
- Region
- australia_qld
- Reported Region
- australia_qld
- Ticker
- QML
Geometry
- Grade
- 3.3
- Grade Unit
- g/t
- Intercept
- 35 m
- From
- 107 m
- To
- 142 m
- Hole Depth
- 211.5 m
- Intercept Depth
- 107 m
Classification
- Deposit Type
- vms
- Program
- exploration
- Sample Type
- drill
- Group ID
- 26MCRD002:107-142
- Mining Method
- unknown
Location
- Easting
- 260013
- Northing
- 7421420
- CRS
- UTM
- Elevation
- 125.3 m
- Azimuth
- 240 °
- Dip
- -75.1 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Brisbane
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
Deleterious
- Deleterious Flag
- No
Compositing
- Cutoff Grade
- 0.2
- Cutoff Unit
- % Cu
- Dilution Disclosed
- Yes
- Max Dilution
- 2 m
Review
- Needs Review
- Yes
- Review Reason
- historical_restatement
- Interp. Status
- scored
- Historical
- Yes
Dates
- Event date
- 2026-10-11T00:00:00.000Z
Reasoning: This previously reported silver intercept shows a very low grade over a significant width, contributing little new information.
Positive factors
- QA/QC procedures disclosed
- Compositing parameters transparent
Negative factors
- Very low silver grade
- Result is previously reported, low novelty
Evidence · table
“3.3”
Context: 35
Tags used in scoring
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "1 A N N O U N C E M E N T QMINES DISCOVERS COPPER SULPHIDES 180M BEYOND MT CHALMERS RESOURCE HIGHLIGHTS • New Copper Dis"
Rejected tags
Rejected tags — excluded from scoring because their label or evidence could not be verified.
Stale Data Re-releaseRejected · negative
Historical results re-announced with no new assays or reinterpretation — low genuine novelty.
Reason: The intercept is explicitly marked as 'Previously reported' in the table.
Evidence · table
“Previously reported”
Context: 26MCRD002
QA/QC DisclosedRejected · positive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Reason: The JORC table details internal QA/QC review by QMines technical personnel and the Competent Person.
Evidence · text
“Drilling, logging, sampling, assay and QAQC data were internally reviewed by QMines technical personnel and the Competent Person.”
Compositing TransparentRejected · positive
Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Reason: The table specifies a 0.20% Cu lower cut off and maximum 2m internal dilution for the reported intercepts.
Evidence · text
“0.20% Cu lower cut off, maximum 2m internal dilution.”
26MCRD002Mt Chalmers West · copperGrade: 3.22Grade Unit: %Intercept: 31 mHistorical resultNeeds review: historical_restatementView all detailsHide details
Identity
- Hole ID
- 26MCRD002
- Project
- Mt Chalmers West
- Commodity
- copper
- Region
- australia_qld
- Reported Region
- australia_qld
- Ticker
- QML
Geometry
- Grade
- 3.22
- Grade Unit
- %
- Intercept
- 31 m
- From
- 110 m
- To
- 141 m
- Hole Depth
- 211.5 m
- Intercept Depth
- 110 m
Classification
- Deposit Type
- vms
- Program
- exploration
- Sample Type
- drill
- Group ID
- 26MCRD002:110-141
- Mining Method
- unknown
Location
- Easting
- 260013
- Northing
- 7421420
- CRS
- UTM
- Elevation
- 125.3 m
- Azimuth
- 240 °
- Dip
- -75.1 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Brisbane
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
Deleterious
- Deleterious Flag
- No
Compositing
- Cutoff Grade
- 0.2
- Cutoff Unit
- % Cu
- Dilution Disclosed
- Yes
- Max Dilution
- 2 m
Review
- Needs Review
- Yes
- Review Reason
- historical_restatement
- Interp. Status
- scored
- Historical
- Yes
Dates
- Event date
- 2026-10-11T00:00:00.000Z
Reasoning: This previously reported sub-interval shows a strong copper grade over a significant width, indicating good mineralization, but has low novelty.
Positive factors
- Strong copper grade for VMS deposit type
- Significant intercept length (31m)
- QA/QC procedures disclosed
- Compositing parameters transparent
Negative factors
- Result is previously reported, low novelty
Evidence · table
“3.22”
Context: 31
Tags used in scoring
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "1 A N N O U N C E M E N T QMINES DISCOVERS COPPER SULPHIDES 180M BEYOND MT CHALMERS RESOURCE HIGHLIGHTS • New Copper Dis"
Rejected tags
Rejected tags — excluded from scoring because their label or evidence could not be verified.
Stale Data Re-releaseRejected · negative
Historical results re-announced with no new assays or reinterpretation — low genuine novelty.
Reason: The intercept is explicitly marked as 'Previously reported' in the table.
Evidence · table
“Previously reported”
Context: 26MCRD002
QA/QC DisclosedRejected · positive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Reason: The JORC table details internal QA/QC review by QMines technical personnel and the Competent Person.
Evidence · text
“Drilling, logging, sampling, assay and QAQC data were internally reviewed by QMines technical personnel and the Competent Person.”
Compositing TransparentRejected · positive
Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Reason: The table specifies a 0.20% Cu lower cut off and maximum 2m internal dilution for the reported intercepts.
Evidence · text
“0.20% Cu lower cut off, maximum 2m internal dilution.”
26MCRD002Mt Chalmers West · goldGrade: 0.83Grade Unit: g/tIntercept: 31 mHistorical resultNeeds review: historical_restatementView all detailsHide details
Identity
- Hole ID
- 26MCRD002
- Project
- Mt Chalmers West
- Commodity
- gold
- Region
- australia_qld
- Reported Region
- australia_qld
- Ticker
- QML
Geometry
- Grade
- 0.83
- Grade Unit
- g/t
- Intercept
- 31 m
- From
- 110 m
- To
- 141 m
- Hole Depth
- 211.5 m
- Intercept Depth
- 110 m
Classification
- Deposit Type
- vms
- Program
- exploration
- Sample Type
- drill
- Group ID
- 26MCRD002:110-141
- Mining Method
- unknown
Location
- Easting
- 260013
- Northing
- 7421420
- CRS
- UTM
- Elevation
- 125.3 m
- Azimuth
- 240 °
- Dip
- -75.1 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Brisbane
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
Deleterious
- Deleterious Flag
- No
Compositing
- Cutoff Grade
- 0.2
- Cutoff Unit
- % Cu
- Dilution Disclosed
- Yes
- Max Dilution
- 2 m
Review
- Needs Review
- Yes
- Review Reason
- historical_restatement
- Interp. Status
- scored
- Historical
- Yes
Dates
- Event date
- 2026-10-11T00:00:00.000Z
Reasoning: This previously reported sub-interval shows a moderate gold grade over a significant width, but has low novelty.
Positive factors
- QA/QC procedures disclosed
- Compositing parameters transparent
Negative factors
- Result is previously reported, low novelty
Evidence · table
“0.83”
Context: 31
Tags used in scoring
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "1 A N N O U N C E M E N T QMINES DISCOVERS COPPER SULPHIDES 180M BEYOND MT CHALMERS RESOURCE HIGHLIGHTS • New Copper Dis"
Rejected tags
Rejected tags — excluded from scoring because their label or evidence could not be verified.
Stale Data Re-releaseRejected · negative
Historical results re-announced with no new assays or reinterpretation — low genuine novelty.
Reason: The intercept is explicitly marked as 'Previously reported' in the table.
Evidence · table
“Previously reported”
Context: 26MCRD002
QA/QC DisclosedRejected · positive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Reason: The JORC table details internal QA/QC review by QMines technical personnel and the Competent Person.
Evidence · text
“Drilling, logging, sampling, assay and QAQC data were internally reviewed by QMines technical personnel and the Competent Person.”
Compositing TransparentRejected · positive
Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Reason: The table specifies a 0.20% Cu lower cut off and maximum 2m internal dilution for the reported intercepts.
Evidence · text
“0.20% Cu lower cut off, maximum 2m internal dilution.”
26MCRD002Mt Chalmers West · zincGrade: 0.02Grade Unit: %Intercept: 31 mHistorical resultNeeds review: historical_restatementView all detailsHide details
Identity
- Hole ID
- 26MCRD002
- Project
- Mt Chalmers West
- Commodity
- zinc
- Region
- australia_qld
- Reported Region
- australia_qld
- Ticker
- QML
Geometry
- Grade
- 0.02
- Grade Unit
- %
- Intercept
- 31 m
- From
- 110 m
- To
- 141 m
- Hole Depth
- 211.5 m
- Intercept Depth
- 110 m
Classification
- Deposit Type
- vms
- Program
- exploration
- Sample Type
- drill
- Group ID
- 26MCRD002:110-141
- Mining Method
- unknown
Location
- Easting
- 260013
- Northing
- 7421420
- CRS
- UTM
- Elevation
- 125.3 m
- Azimuth
- 240 °
- Dip
- -75.1 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Brisbane
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
Deleterious
- Deleterious Flag
- No
Compositing
- Cutoff Grade
- 0.2
- Cutoff Unit
- % Cu
- Dilution Disclosed
- Yes
- Max Dilution
- 2 m
Review
- Needs Review
- Yes
- Review Reason
- historical_restatement
- Interp. Status
- scored
- Historical
- Yes
Dates
- Event date
- 2026-10-11T00:00:00.000Z
Reasoning: This previously reported sub-interval shows a very low zinc grade over a significant width, contributing little new information.
Positive factors
- QA/QC procedures disclosed
- Compositing parameters transparent
Negative factors
- Very low zinc grade
- Result is previously reported, low novelty
Evidence · table
“0.02”
Context: 31
Tags used in scoring
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "1 A N N O U N C E M E N T QMINES DISCOVERS COPPER SULPHIDES 180M BEYOND MT CHALMERS RESOURCE HIGHLIGHTS • New Copper Dis"
Rejected tags
Rejected tags — excluded from scoring because their label or evidence could not be verified.
Stale Data Re-releaseRejected · negative
Historical results re-announced with no new assays or reinterpretation — low genuine novelty.
Reason: The intercept is explicitly marked as 'Previously reported' in the table.
Evidence · table
“Previously reported”
Context: 26MCRD002
QA/QC DisclosedRejected · positive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Reason: The JORC table details internal QA/QC review by QMines technical personnel and the Competent Person.
Evidence · text
“Drilling, logging, sampling, assay and QAQC data were internally reviewed by QMines technical personnel and the Competent Person.”
Compositing TransparentRejected · positive
Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Reason: The table specifies a 0.20% Cu lower cut off and maximum 2m internal dilution for the reported intercepts.
Evidence · text
“0.20% Cu lower cut off, maximum 2m internal dilution.”
26MCRD002Mt Chalmers West · silverGrade: 3.6Grade Unit: g/tIntercept: 31 mHistorical resultNeeds review: historical_restatementView all detailsHide details
Identity
- Hole ID
- 26MCRD002
- Project
- Mt Chalmers West
- Commodity
- silver
- Region
- australia_qld
- Reported Region
- australia_qld
- Ticker
- QML
Geometry
- Grade
- 3.6
- Grade Unit
- g/t
- Intercept
- 31 m
- From
- 110 m
- To
- 141 m
- Hole Depth
- 211.5 m
- Intercept Depth
- 110 m
Classification
- Deposit Type
- vms
- Program
- exploration
- Sample Type
- drill
- Group ID
- 26MCRD002:110-141
- Mining Method
- unknown
Location
- Easting
- 260013
- Northing
- 7421420
- CRS
- UTM
- Elevation
- 125.3 m
- Azimuth
- 240 °
- Dip
- -75.1 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Brisbane
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
Deleterious
- Deleterious Flag
- No
Compositing
- Cutoff Grade
- 0.2
- Cutoff Unit
- % Cu
- Dilution Disclosed
- Yes
- Max Dilution
- 2 m
Review
- Needs Review
- Yes
- Review Reason
- historical_restatement
- Interp. Status
- scored
- Historical
- Yes
Dates
- Event date
- 2026-10-11T00:00:00.000Z
Reasoning: This previously reported sub-interval shows a very low silver grade over a significant width, contributing little new information.
Positive factors
- QA/QC procedures disclosed
- Compositing parameters transparent
Negative factors
- Very low silver grade
- Result is previously reported, low novelty
Evidence · table
“3.6”
Context: 31
Tags used in scoring
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "1 A N N O U N C E M E N T QMINES DISCOVERS COPPER SULPHIDES 180M BEYOND MT CHALMERS RESOURCE HIGHLIGHTS • New Copper Dis"
Rejected tags
Rejected tags — excluded from scoring because their label or evidence could not be verified.
Stale Data Re-releaseRejected · negative
Historical results re-announced with no new assays or reinterpretation — low genuine novelty.
Reason: The intercept is explicitly marked as 'Previously reported' in the table.
Evidence · table
“Previously reported”
Context: 26MCRD002
QA/QC DisclosedRejected · positive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Reason: The JORC table details internal QA/QC review by QMines technical personnel and the Competent Person.
Evidence · text
“Drilling, logging, sampling, assay and QAQC data were internally reviewed by QMines technical personnel and the Competent Person.”
Compositing TransparentRejected · positive
Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Reason: The table specifies a 0.20% Cu lower cut off and maximum 2m internal dilution for the reported intercepts.
Evidence · text
“0.20% Cu lower cut off, maximum 2m internal dilution.”
26MCRD002Mt Chalmers West · copperGrade: 0.89Grade Unit: %Intercept: 4 mHistorical resultNeeds review: historical_restatementView all detailsHide details
Identity
- Hole ID
- 26MCRD002
- Project
- Mt Chalmers West
- Commodity
- copper
- Region
- australia_qld
- Reported Region
- australia_qld
- Ticker
- QML
Geometry
- Grade
- 0.89
- Grade Unit
- %
- Intercept
- 4 m
- From
- 146 m
- To
- 150 m
- Hole Depth
- 211.5 m
- Intercept Depth
- 146 m
Classification
- Deposit Type
- vms
- Program
- exploration
- Sample Type
- drill
- Group ID
- 26MCRD002:146-150
- Mining Method
- unknown
Location
- Easting
- 260013
- Northing
- 7421420
- CRS
- UTM
- Elevation
- 125.3 m
- Azimuth
- 240 °
- Dip
- -75.1 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Brisbane
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
Deleterious
- Deleterious Flag
- No
Compositing
- Cutoff Grade
- 0.2
- Cutoff Unit
- % Cu
- Dilution Disclosed
- Yes
- Max Dilution
- 2 m
Review
- Needs Review
- Yes
- Review Reason
- historical_restatement
- Interp. Status
- scored
- Historical
- Yes
Dates
- Event date
- 2026-10-11T00:00:00.000Z
Reasoning: This previously reported sub-interval shows a moderate copper grade over a narrow width, but has low novelty.
Positive factors
- Moderate copper grade for VMS deposit type
- QA/QC procedures disclosed
- Compositing parameters transparent
Negative factors
- Result is previously reported, low novelty
Evidence · table
“0.89”
Context: 4
Tags used in scoring
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "1 A N N O U N C E M E N T QMINES DISCOVERS COPPER SULPHIDES 180M BEYOND MT CHALMERS RESOURCE HIGHLIGHTS • New Copper Dis"
Rejected tags
Rejected tags — excluded from scoring because their label or evidence could not be verified.
Stale Data Re-releaseRejected · negative
Historical results re-announced with no new assays or reinterpretation — low genuine novelty.
Reason: The intercept is explicitly marked as 'Previously reported' in the table.
Evidence · table
“Previously reported”
Context: 26MCRD002
QA/QC DisclosedRejected · positive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Reason: The JORC table details internal QA/QC review by QMines technical personnel and the Competent Person.
Evidence · text
“Drilling, logging, sampling, assay and QAQC data were internally reviewed by QMines technical personnel and the Competent Person.”
Compositing TransparentRejected · positive
Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Reason: The table specifies a 0.20% Cu lower cut off and maximum 2m internal dilution for the reported intercepts.
Evidence · text
“0.20% Cu lower cut off, maximum 2m internal dilution.”
26MCRD002Mt Chalmers West · goldGrade: 0.21Grade Unit: g/tIntercept: 4 mHistorical resultNeeds review: historical_restatementView all detailsHide details
Identity
- Hole ID
- 26MCRD002
- Project
- Mt Chalmers West
- Commodity
- gold
- Region
- australia_qld
- Reported Region
- australia_qld
- Ticker
- QML
Geometry
- Grade
- 0.21
- Grade Unit
- g/t
- Intercept
- 4 m
- From
- 146 m
- To
- 150 m
- Hole Depth
- 211.5 m
- Intercept Depth
- 146 m
Classification
- Deposit Type
- vms
- Program
- exploration
- Sample Type
- drill
- Group ID
- 26MCRD002:146-150
- Mining Method
- unknown
Location
- Easting
- 260013
- Northing
- 7421420
- CRS
- UTM
- Elevation
- 125.3 m
- Azimuth
- 240 °
- Dip
- -75.1 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Brisbane
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
Deleterious
- Deleterious Flag
- No
Compositing
- Cutoff Grade
- 0.2
- Cutoff Unit
- % Cu
- Dilution Disclosed
- Yes
- Max Dilution
- 2 m
Review
- Needs Review
- Yes
- Review Reason
- historical_restatement
- Interp. Status
- scored
- Historical
- Yes
Dates
- Event date
- 2026-10-11T00:00:00.000Z
Reasoning: This previously reported sub-interval shows a weak gold grade over a narrow width, but has low novelty.
Positive factors
- QA/QC procedures disclosed
- Compositing parameters transparent
Negative factors
- Result is previously reported, low novelty
Evidence · table
“0.21”
Context: 4
Tags used in scoring
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "1 A N N O U N C E M E N T QMINES DISCOVERS COPPER SULPHIDES 180M BEYOND MT CHALMERS RESOURCE HIGHLIGHTS • New Copper Dis"
Rejected tags
Rejected tags — excluded from scoring because their label or evidence could not be verified.
Stale Data Re-releaseRejected · negative
Historical results re-announced with no new assays or reinterpretation — low genuine novelty.
Reason: The intercept is explicitly marked as 'Previously reported' in the table.
Evidence · table
“Previously reported”
Context: 26MCRD002
QA/QC DisclosedRejected · positive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Reason: The JORC table details internal QA/QC review by QMines technical personnel and the Competent Person.
Evidence · text
“Drilling, logging, sampling, assay and QAQC data were internally reviewed by QMines technical personnel and the Competent Person.”
Compositing TransparentRejected · positive
Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Reason: The table specifies a 0.20% Cu lower cut off and maximum 2m internal dilution for the reported intercepts.
Evidence · text
“0.20% Cu lower cut off, maximum 2m internal dilution.”
26MCRD002Mt Chalmers West · zincGrade: 0.02Grade Unit: %Intercept: 4 mHistorical resultNeeds review: historical_restatementView all detailsHide details
Identity
- Hole ID
- 26MCRD002
- Project
- Mt Chalmers West
- Commodity
- zinc
- Region
- australia_qld
- Reported Region
- australia_qld
- Ticker
- QML
Geometry
- Grade
- 0.02
- Grade Unit
- %
- Intercept
- 4 m
- From
- 146 m
- To
- 150 m
- Hole Depth
- 211.5 m
- Intercept Depth
- 146 m
Classification
- Deposit Type
- vms
- Program
- exploration
- Sample Type
- drill
- Group ID
- 26MCRD002:146-150
- Mining Method
- unknown
Location
- Easting
- 260013
- Northing
- 7421420
- CRS
- UTM
- Elevation
- 125.3 m
- Azimuth
- 240 °
- Dip
- -75.1 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Brisbane
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
Deleterious
- Deleterious Flag
- No
Compositing
- Cutoff Grade
- 0.2
- Cutoff Unit
- % Cu
- Dilution Disclosed
- Yes
- Max Dilution
- 2 m
Review
- Needs Review
- Yes
- Review Reason
- historical_restatement
- Interp. Status
- scored
- Historical
- Yes
Dates
- Event date
- 2026-10-11T00:00:00.000Z
Reasoning: This previously reported sub-interval shows a very low zinc grade over a narrow width, contributing little new information.
Positive factors
- QA/QC procedures disclosed
- Compositing parameters transparent
Negative factors
- Very low zinc grade
- Result is previously reported, low novelty
Evidence · table
“0.02”
Context: 4
Tags used in scoring
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "1 A N N O U N C E M E N T QMINES DISCOVERS COPPER SULPHIDES 180M BEYOND MT CHALMERS RESOURCE HIGHLIGHTS • New Copper Dis"
Rejected tags
Rejected tags — excluded from scoring because their label or evidence could not be verified.
Stale Data Re-releaseRejected · negative
Historical results re-announced with no new assays or reinterpretation — low genuine novelty.
Reason: The intercept is explicitly marked as 'Previously reported' in the table.
Evidence · table
“Previously reported”
Context: 26MCRD002
QA/QC DisclosedRejected · positive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Reason: The JORC table details internal QA/QC review by QMines technical personnel and the Competent Person.
Evidence · text
“Drilling, logging, sampling, assay and QAQC data were internally reviewed by QMines technical personnel and the Competent Person.”
Compositing TransparentRejected · positive
Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Reason: The table specifies a 0.20% Cu lower cut off and maximum 2m internal dilution for the reported intercepts.
Evidence · text
“0.20% Cu lower cut off, maximum 2m internal dilution.”
26MCRD002Mt Chalmers West · silverGrade: 2.2Grade Unit: g/tIntercept: 4 mHistorical resultNeeds review: historical_restatementView all detailsHide details
Identity
- Hole ID
- 26MCRD002
- Project
- Mt Chalmers West
- Commodity
- silver
- Region
- australia_qld
- Reported Region
- australia_qld
- Ticker
- QML
Geometry
- Grade
- 2.2
- Grade Unit
- g/t
- Intercept
- 4 m
- From
- 146 m
- To
- 150 m
- Hole Depth
- 211.5 m
- Intercept Depth
- 146 m
Classification
- Deposit Type
- vms
- Program
- exploration
- Sample Type
- drill
- Group ID
- 26MCRD002:146-150
- Mining Method
- unknown
Location
- Easting
- 260013
- Northing
- 7421420
- CRS
- UTM
- Elevation
- 125.3 m
- Azimuth
- 240 °
- Dip
- -75.1 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Brisbane
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
Deleterious
- Deleterious Flag
- No
Compositing
- Cutoff Grade
- 0.2
- Cutoff Unit
- % Cu
- Dilution Disclosed
- Yes
- Max Dilution
- 2 m
Review
- Needs Review
- Yes
- Review Reason
- historical_restatement
- Interp. Status
- scored
- Historical
- Yes
Dates
- Event date
- 2026-10-11T00:00:00.000Z
Reasoning: This previously reported sub-interval shows a very low silver grade over a narrow width, contributing little new information.
Positive factors
- QA/QC procedures disclosed
- Compositing parameters transparent
Negative factors
- Very low silver grade
- Result is previously reported, low novelty
Evidence · table
“2.2”
Context: 4
Tags used in scoring
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "1 A N N O U N C E M E N T QMINES DISCOVERS COPPER SULPHIDES 180M BEYOND MT CHALMERS RESOURCE HIGHLIGHTS • New Copper Dis"
Rejected tags
Rejected tags — excluded from scoring because their label or evidence could not be verified.
Stale Data Re-releaseRejected · negative
Historical results re-announced with no new assays or reinterpretation — low genuine novelty.
Reason: The intercept is explicitly marked as 'Previously reported' in the table.
Evidence · table
“Previously reported”
Context: 26MCRD002
QA/QC DisclosedRejected · positive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Reason: The JORC table details internal QA/QC review by QMines technical personnel and the Competent Person.
Evidence · text
“Drilling, logging, sampling, assay and QAQC data were internally reviewed by QMines technical personnel and the Competent Person.”
Compositing TransparentRejected · positive
Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Reason: The table specifies a 0.20% Cu lower cut off and maximum 2m internal dilution for the reported intercepts.
Evidence · text
“0.20% Cu lower cut off, maximum 2m internal dilution.”
26MCRD002Mt Chalmers West · copperGrade: 1.01Grade Unit: %Intercept: 1 mHistorical resultNeeds review: historical_restatementView all detailsHide details
Identity
- Hole ID
- 26MCRD002
- Project
- Mt Chalmers West
- Commodity
- copper
- Region
- australia_qld
- Reported Region
- australia_qld
- Ticker
- QML
Geometry
- Grade
- 1.01
- Grade Unit
- %
- Intercept
- 1 m
- From
- 160 m
- To
- 161 m
- Hole Depth
- 211.5 m
- Intercept Depth
- 160 m
Classification
- Deposit Type
- vms
- Program
- exploration
- Sample Type
- drill
- Group ID
- 26MCRD002:160-161
- Mining Method
- unknown
Location
- Easting
- 260013
- Northing
- 7421420
- CRS
- UTM
- Elevation
- 125.3 m
- Azimuth
- 240 °
- Dip
- -75.1 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Brisbane
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
Deleterious
- Deleterious Flag
- No
Compositing
- Cutoff Grade
- 0.2
- Cutoff Unit
- % Cu
- Dilution Disclosed
- Yes
- Max Dilution
- 2 m
Review
- Needs Review
- Yes
- Review Reason
- historical_restatement
- Interp. Status
- scored
- Historical
- Yes
Dates
- Event date
- 2026-10-11T00:00:00.000Z
Reasoning: This previously reported sub-interval shows a moderate copper grade over a very narrow width, contributing little new information.
Positive factors
- Moderate copper grade for VMS deposit type
- QA/QC procedures disclosed
- Compositing parameters transparent
Negative factors
- Very narrow intercept length (1m)
- Result is previously reported, low novelty
Evidence · table
“1.01”
Context: 1
Tags used in scoring
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "1 A N N O U N C E M E N T QMINES DISCOVERS COPPER SULPHIDES 180M BEYOND MT CHALMERS RESOURCE HIGHLIGHTS • New Copper Dis"
Rejected tags
Rejected tags — excluded from scoring because their label or evidence could not be verified.
Stale Data Re-releaseRejected · negative
Historical results re-announced with no new assays or reinterpretation — low genuine novelty.
Reason: The intercept is explicitly marked as 'Previously reported' in the table.
Evidence · table
“Previously reported”
Context: 26MCRD002
QA/QC DisclosedRejected · positive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Reason: The JORC table details internal QA/QC review by QMines technical personnel and the Competent Person.
Evidence · text
“Drilling, logging, sampling, assay and QAQC data were internally reviewed by QMines technical personnel and the Competent Person.”
Compositing TransparentRejected · positive
Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Reason: The table specifies a 0.20% Cu lower cut off and maximum 2m internal dilution for the reported intercepts.
Evidence · text
“0.20% Cu lower cut off, maximum 2m internal dilution.”
26MCRD002Mt Chalmers West · goldGrade: 0.11Grade Unit: g/tIntercept: 1 mHistorical resultNeeds review: historical_restatementView all detailsHide details
Identity
- Hole ID
- 26MCRD002
- Project
- Mt Chalmers West
- Commodity
- gold
- Region
- australia_qld
- Reported Region
- australia_qld
- Ticker
- QML
Geometry
- Grade
- 0.11
- Grade Unit
- g/t
- Intercept
- 1 m
- From
- 160 m
- To
- 161 m
- Hole Depth
- 211.5 m
- Intercept Depth
- 160 m
Classification
- Deposit Type
- vms
- Program
- exploration
- Sample Type
- drill
- Group ID
- 26MCRD002:160-161
- Mining Method
- unknown
Location
- Easting
- 260013
- Northing
- 7421420
- CRS
- UTM
- Elevation
- 125.3 m
- Azimuth
- 240 °
- Dip
- -75.1 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Brisbane
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
Deleterious
- Deleterious Flag
- No
Compositing
- Cutoff Grade
- 0.2
- Cutoff Unit
- % Cu
- Dilution Disclosed
- Yes
- Max Dilution
- 2 m
Review
- Needs Review
- Yes
- Review Reason
- historical_restatement
- Interp. Status
- scored
- Historical
- Yes
Dates
- Event date
- 2026-10-11T00:00:00.000Z
Reasoning: This previously reported sub-interval shows a very low gold grade over a very narrow width, contributing little new information.
Positive factors
- QA/QC procedures disclosed
- Compositing parameters transparent
Negative factors
- Very low gold grade
- Very narrow intercept length (1m)
- Result is previously reported, low novelty
Evidence · table
“0.11”
Context: 1
Tags used in scoring
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "1 A N N O U N C E M E N T QMINES DISCOVERS COPPER SULPHIDES 180M BEYOND MT CHALMERS RESOURCE HIGHLIGHTS • New Copper Dis"
Rejected tags
Rejected tags — excluded from scoring because their label or evidence could not be verified.
Stale Data Re-releaseRejected · negative
Historical results re-announced with no new assays or reinterpretation — low genuine novelty.
Reason: The intercept is explicitly marked as 'Previously reported' in the table.
Evidence · table
“Previously reported”
Context: 26MCRD002
QA/QC DisclosedRejected · positive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Reason: The JORC table details internal QA/QC review by QMines technical personnel and the Competent Person.
Evidence · text
“Drilling, logging, sampling, assay and QAQC data were internally reviewed by QMines technical personnel and the Competent Person.”
Compositing TransparentRejected · positive
Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Reason: The table specifies a 0.20% Cu lower cut off and maximum 2m internal dilution for the reported intercepts.
Evidence · text
“0.20% Cu lower cut off, maximum 2m internal dilution.”
26MCRD002Mt Chalmers West · zincGrade: 0.01Grade Unit: %Intercept: 1 mHistorical resultNeeds review: historical_restatementView all detailsHide details
Identity
- Hole ID
- 26MCRD002
- Project
- Mt Chalmers West
- Commodity
- zinc
- Region
- australia_qld
- Reported Region
- australia_qld
- Ticker
- QML
Geometry
- Grade
- 0.01
- Grade Unit
- %
- Intercept
- 1 m
- From
- 160 m
- To
- 161 m
- Hole Depth
- 211.5 m
- Intercept Depth
- 160 m
Classification
- Deposit Type
- vms
- Program
- exploration
- Sample Type
- drill
- Group ID
- 26MCRD002:160-161
- Mining Method
- unknown
Location
- Easting
- 260013
- Northing
- 7421420
- CRS
- UTM
- Elevation
- 125.3 m
- Azimuth
- 240 °
- Dip
- -75.1 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Brisbane
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
Deleterious
- Deleterious Flag
- No
Compositing
- Cutoff Grade
- 0.2
- Cutoff Unit
- % Cu
- Dilution Disclosed
- Yes
- Max Dilution
- 2 m
Review
- Needs Review
- Yes
- Review Reason
- historical_restatement
- Interp. Status
- scored
- Historical
- Yes
Dates
- Event date
- 2026-10-11T00:00:00.000Z
Reasoning: This previously reported sub-interval shows a very low zinc grade over a very narrow width, contributing little new information.
Positive factors
- QA/QC procedures disclosed
- Compositing parameters transparent
Negative factors
- Very low zinc grade
- Very narrow intercept length (1m)
- Result is previously reported, low novelty
Evidence · table
“0.01”
Context: 1
Tags used in scoring
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "1 A N N O U N C E M E N T QMINES DISCOVERS COPPER SULPHIDES 180M BEYOND MT CHALMERS RESOURCE HIGHLIGHTS • New Copper Dis"
Rejected tags
Rejected tags — excluded from scoring because their label or evidence could not be verified.
Stale Data Re-releaseRejected · negative
Historical results re-announced with no new assays or reinterpretation — low genuine novelty.
Reason: The intercept is explicitly marked as 'Previously reported' in the table.
Evidence · table
“Previously reported”
Context: 26MCRD002
QA/QC DisclosedRejected · positive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Reason: The JORC table details internal QA/QC review by QMines technical personnel and the Competent Person.
Evidence · text
“Drilling, logging, sampling, assay and QAQC data were internally reviewed by QMines technical personnel and the Competent Person.”
Compositing TransparentRejected · positive
Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Reason: The table specifies a 0.20% Cu lower cut off and maximum 2m internal dilution for the reported intercepts.
Evidence · text
“0.20% Cu lower cut off, maximum 2m internal dilution.”
26MCRD002Mt Chalmers West · silverGrade: 2.1Grade Unit: g/tIntercept: 1 mHistorical resultNeeds review: historical_restatementView all detailsHide details
Identity
- Hole ID
- 26MCRD002
- Project
- Mt Chalmers West
- Commodity
- silver
- Region
- australia_qld
- Reported Region
- australia_qld
- Ticker
- QML
Geometry
- Grade
- 2.1
- Grade Unit
- g/t
- Intercept
- 1 m
- From
- 160 m
- To
- 161 m
- Hole Depth
- 211.5 m
- Intercept Depth
- 160 m
Classification
- Deposit Type
- vms
- Program
- exploration
- Sample Type
- drill
- Group ID
- 26MCRD002:160-161
- Mining Method
- unknown
Location
- Easting
- 260013
- Northing
- 7421420
- CRS
- UTM
- Elevation
- 125.3 m
- Azimuth
- 240 °
- Dip
- -75.1 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Brisbane
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
Deleterious
- Deleterious Flag
- No
Compositing
- Cutoff Grade
- 0.2
- Cutoff Unit
- % Cu
- Dilution Disclosed
- Yes
- Max Dilution
- 2 m
Review
- Needs Review
- Yes
- Review Reason
- historical_restatement
- Interp. Status
- scored
- Historical
- Yes
Dates
- Event date
- 2026-10-11T00:00:00.000Z
Reasoning: This previously reported sub-interval shows a very low silver grade over a very narrow width, contributing little new information.
Positive factors
- QA/QC procedures disclosed
- Compositing parameters transparent
Negative factors
- Very low silver grade
- Very narrow intercept length (1m)
- Result is previously reported, low novelty
Evidence · table
“2.1”
Context: 1
Tags used in scoring
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "1 A N N O U N C E M E N T QMINES DISCOVERS COPPER SULPHIDES 180M BEYOND MT CHALMERS RESOURCE HIGHLIGHTS • New Copper Dis"
Rejected tags
Rejected tags — excluded from scoring because their label or evidence could not be verified.
Stale Data Re-releaseRejected · negative
Historical results re-announced with no new assays or reinterpretation — low genuine novelty.
Reason: The intercept is explicitly marked as 'Previously reported' in the table.
Evidence · table
“Previously reported”
Context: 26MCRD002
QA/QC DisclosedRejected · positive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Reason: The JORC table details internal QA/QC review by QMines technical personnel and the Competent Person.
Evidence · text
“Drilling, logging, sampling, assay and QAQC data were internally reviewed by QMines technical personnel and the Competent Person.”
Compositing TransparentRejected · positive
Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Reason: The table specifies a 0.20% Cu lower cut off and maximum 2m internal dilution for the reported intercepts.
Evidence · text
“0.20% Cu lower cut off, maximum 2m internal dilution.”
26MCRD002Mt Chalmers West · copperGrade: 0.55Grade Unit: %Intercept: 1 mHistorical resultNeeds review: historical_restatementView all detailsHide details
Identity
- Hole ID
- 26MCRD002
- Project
- Mt Chalmers West
- Commodity
- copper
- Region
- australia_qld
- Reported Region
- australia_qld
- Ticker
- QML
Geometry
- Grade
- 0.55
- Grade Unit
- %
- Intercept
- 1 m
- From
- 178 m
- To
- 179 m
- Hole Depth
- 211.5 m
- Intercept Depth
- 178 m
Classification
- Deposit Type
- vms
- Program
- exploration
- Sample Type
- drill
- Group ID
- 26MCRD002:178-179
- Mining Method
- unknown
Location
- Easting
- 260013
- Northing
- 7421420
- CRS
- UTM
- Elevation
- 125.3 m
- Azimuth
- 240 °
- Dip
- -75.1 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Brisbane
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
Deleterious
- Deleterious Flag
- No
Compositing
- Cutoff Grade
- 0.2
- Cutoff Unit
- % Cu
- Dilution Disclosed
- Yes
- Max Dilution
- 2 m
Review
- Needs Review
- Yes
- Review Reason
- historical_restatement
- Interp. Status
- scored
- Historical
- Yes
Dates
- Event date
- 2026-10-11T00:00:00.000Z
Reasoning: This previously reported sub-interval shows a moderate copper grade over a very narrow width, contributing little new information.
Positive factors
- QA/QC procedures disclosed
- Compositing parameters transparent
Negative factors
- Very narrow intercept length (1m)
- Result is previously reported, low novelty
Evidence · table
“0.55”
Context: 1
Tags used in scoring
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "1 A N N O U N C E M E N T QMINES DISCOVERS COPPER SULPHIDES 180M BEYOND MT CHALMERS RESOURCE HIGHLIGHTS • New Copper Dis"
Rejected tags
Rejected tags — excluded from scoring because their label or evidence could not be verified.
Stale Data Re-releaseRejected · negative
Historical results re-announced with no new assays or reinterpretation — low genuine novelty.
Reason: The intercept is explicitly marked as 'Previously reported' in the table.
Evidence · table
“Previously reported”
Context: 26MCRD002
QA/QC DisclosedRejected · positive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Reason: The JORC table details internal QA/QC review by QMines technical personnel and the Competent Person.
Evidence · text
“Drilling, logging, sampling, assay and QAQC data were internally reviewed by QMines technical personnel and the Competent Person.”
Compositing TransparentRejected · positive
Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Reason: The table specifies a 0.20% Cu lower cut off and maximum 2m internal dilution for the reported intercepts.
Evidence · text
“0.20% Cu lower cut off, maximum 2m internal dilution.”
26MCRD002Mt Chalmers West · goldGrade: 0.06Grade Unit: g/tIntercept: 1 mHistorical resultNeeds review: historical_restatementView all detailsHide details
Identity
- Hole ID
- 26MCRD002
- Project
- Mt Chalmers West
- Commodity
- gold
- Region
- australia_qld
- Reported Region
- australia_qld
- Ticker
- QML
Geometry
- Grade
- 0.06
- Grade Unit
- g/t
- Intercept
- 1 m
- From
- 178 m
- To
- 179 m
- Hole Depth
- 211.5 m
- Intercept Depth
- 178 m
Classification
- Deposit Type
- vms
- Program
- exploration
- Sample Type
- drill
- Group ID
- 26MCRD002:178-179
- Mining Method
- unknown
Location
- Easting
- 260013
- Northing
- 7421420
- CRS
- UTM
- Elevation
- 125.3 m
- Azimuth
- 240 °
- Dip
- -75.1 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Brisbane
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
Deleterious
- Deleterious Flag
- No
Compositing
- Cutoff Grade
- 0.2
- Cutoff Unit
- % Cu
- Dilution Disclosed
- Yes
- Max Dilution
- 2 m
Review
- Needs Review
- Yes
- Review Reason
- historical_restatement
- Interp. Status
- scored
- Historical
- Yes
Dates
- Event date
- 2026-10-11T00:00:00.000Z
Reasoning: This previously reported sub-interval shows a very low gold grade over a very narrow width, contributing little new information.
Positive factors
- QA/QC procedures disclosed
- Compositing parameters transparent
Negative factors
- Very low gold grade
- Very narrow intercept length (1m)
- Result is previously reported, low novelty
Evidence · table
“0.06”
Context: 1
Tags used in scoring
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "1 A N N O U N C E M E N T QMINES DISCOVERS COPPER SULPHIDES 180M BEYOND MT CHALMERS RESOURCE HIGHLIGHTS • New Copper Dis"
Rejected tags
Rejected tags — excluded from scoring because their label or evidence could not be verified.
Stale Data Re-releaseRejected · negative
Historical results re-announced with no new assays or reinterpretation — low genuine novelty.
Reason: The intercept is explicitly marked as 'Previously reported' in the table.
Evidence · table
“Previously reported”
Context: 26MCRD002
QA/QC DisclosedRejected · positive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Reason: The JORC table details internal QA/QC review by QMines technical personnel and the Competent Person.
Evidence · text
“Drilling, logging, sampling, assay and QAQC data were internally reviewed by QMines technical personnel and the Competent Person.”
Compositing TransparentRejected · positive
Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Reason: The table specifies a 0.20% Cu lower cut off and maximum 2m internal dilution for the reported intercepts.
Evidence · text
“0.20% Cu lower cut off, maximum 2m internal dilution.”
26MCRD002Mt Chalmers West · zincGrade: 0.04Grade Unit: %Intercept: 1 mHistorical resultNeeds review: historical_restatementView all detailsHide details
Identity
- Hole ID
- 26MCRD002
- Project
- Mt Chalmers West
- Commodity
- zinc
- Region
- australia_qld
- Reported Region
- australia_qld
- Ticker
- QML
Geometry
- Grade
- 0.04
- Grade Unit
- %
- Intercept
- 1 m
- From
- 178 m
- To
- 179 m
- Hole Depth
- 211.5 m
- Intercept Depth
- 178 m
Classification
- Deposit Type
- vms
- Program
- exploration
- Sample Type
- drill
- Group ID
- 26MCRD002:178-179
- Mining Method
- unknown
Location
- Easting
- 260013
- Northing
- 7421420
- CRS
- UTM
- Elevation
- 125.3 m
- Azimuth
- 240 °
- Dip
- -75.1 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Brisbane
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
Deleterious
- Deleterious Flag
- No
Compositing
- Cutoff Grade
- 0.2
- Cutoff Unit
- % Cu
- Dilution Disclosed
- Yes
- Max Dilution
- 2 m
Review
- Needs Review
- Yes
- Review Reason
- historical_restatement
- Interp. Status
- scored
- Historical
- Yes
Dates
- Event date
- 2026-10-11T00:00:00.000Z
Reasoning: This previously reported sub-interval shows a very low zinc grade over a very narrow width, contributing little new information.
Positive factors
- QA/QC procedures disclosed
- Compositing parameters transparent
Negative factors
- Very low zinc grade
- Very narrow intercept length (1m)
- Result is previously reported, low novelty
Evidence · table
“0.04”
Context: 1
Tags used in scoring
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "1 A N N O U N C E M E N T QMINES DISCOVERS COPPER SULPHIDES 180M BEYOND MT CHALMERS RESOURCE HIGHLIGHTS • New Copper Dis"
Rejected tags
Rejected tags — excluded from scoring because their label or evidence could not be verified.
Stale Data Re-releaseRejected · negative
Historical results re-announced with no new assays or reinterpretation — low genuine novelty.
Reason: The intercept is explicitly marked as 'Previously reported' in the table.
Evidence · table
“Previously reported”
Context: 26MCRD002
QA/QC DisclosedRejected · positive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Reason: The JORC table details internal QA/QC review by QMines technical personnel and the Competent Person.
Evidence · text
“Drilling, logging, sampling, assay and QAQC data were internally reviewed by QMines technical personnel and the Competent Person.”
Compositing TransparentRejected · positive
Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Reason: The table specifies a 0.20% Cu lower cut off and maximum 2m internal dilution for the reported intercepts.
Evidence · text
“0.20% Cu lower cut off, maximum 2m internal dilution.”
26MCRD002Mt Chalmers West · silverGrade: 0.8Grade Unit: g/tIntercept: 1 mHistorical resultNeeds review: historical_restatementView all detailsHide details
Identity
- Hole ID
- 26MCRD002
- Project
- Mt Chalmers West
- Commodity
- silver
- Region
- australia_qld
- Reported Region
- australia_qld
- Ticker
- QML
Geometry
- Grade
- 0.8
- Grade Unit
- g/t
- Intercept
- 1 m
- From
- 178 m
- To
- 179 m
- Hole Depth
- 211.5 m
- Intercept Depth
- 178 m
Classification
- Deposit Type
- vms
- Program
- exploration
- Sample Type
- drill
- Group ID
- 26MCRD002:178-179
- Mining Method
- unknown
Location
- Easting
- 260013
- Northing
- 7421420
- CRS
- UTM
- Elevation
- 125.3 m
- Azimuth
- 240 °
- Dip
- -75.1 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Brisbane
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
Deleterious
- Deleterious Flag
- No
Compositing
- Cutoff Grade
- 0.2
- Cutoff Unit
- % Cu
- Dilution Disclosed
- Yes
- Max Dilution
- 2 m
Review
- Needs Review
- Yes
- Review Reason
- historical_restatement
- Interp. Status
- scored
- Historical
- Yes
Dates
- Event date
- 2026-10-11T00:00:00.000Z
Reasoning: This previously reported sub-interval shows a very low silver grade over a very narrow width, contributing little new information.
Positive factors
- QA/QC procedures disclosed
- Compositing parameters transparent
Negative factors
- Very low silver grade
- Very narrow intercept length (1m)
- Result is previously reported, low novelty
Evidence · table
“0.8”
Context: 1
Tags used in scoring
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "1 A N N O U N C E M E N T QMINES DISCOVERS COPPER SULPHIDES 180M BEYOND MT CHALMERS RESOURCE HIGHLIGHTS • New Copper Dis"
Rejected tags
Rejected tags — excluded from scoring because their label or evidence could not be verified.
Stale Data Re-releaseRejected · negative
Historical results re-announced with no new assays or reinterpretation — low genuine novelty.
Reason: The intercept is explicitly marked as 'Previously reported' in the table.
Evidence · table
“Previously reported”
Context: 26MCRD002
QA/QC DisclosedRejected · positive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Reason: The JORC table details internal QA/QC review by QMines technical personnel and the Competent Person.
Evidence · text
“Drilling, logging, sampling, assay and QAQC data were internally reviewed by QMines technical personnel and the Competent Person.”
Compositing TransparentRejected · positive
Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Reason: The table specifies a 0.20% Cu lower cut off and maximum 2m internal dilution for the reported intercepts.
Evidence · text
“0.20% Cu lower cut off, maximum 2m internal dilution.”
26MCDD003Mt Chalmers West · copperGrade: 1Grade Unit: %Intercept: 4.3 mHistorical resultNeeds review: historical_restatementView all detailsHide details
Identity
- Hole ID
- 26MCDD003
- Project
- Mt Chalmers West
- Commodity
- copper
- Region
- australia_qld
- Reported Region
- australia_qld
- Ticker
- QML
Geometry
- Grade
- 1
- Grade Unit
- %
- Intercept
- 4.3 m
- From
- 20 m
- To
- 24.5 m
- Hole Depth
- 102 m
- Intercept Depth
- 20 m
Classification
- Deposit Type
- vms
- Program
- exploration
- Sample Type
- drill
- Group ID
- 26MCDD003:20-24.5
- Mining Method
- unknown
Location
- Easting
- 259733
- Northing
- 7421242
- CRS
- UTM
- Elevation
- 96 m
- Azimuth
- 100 °
- Dip
- -60 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Brisbane
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
Deleterious
- Deleterious Flag
- No
Compositing
- Cutoff Grade
- 0.2
- Cutoff Unit
- % Cu
- Dilution Disclosed
- Yes
- Max Dilution
- 2 m
Review
- Needs Review
- Yes
- Review Reason
- historical_restatement
- Interp. Status
- scored
- Historical
- Yes
Dates
- Event date
- 2026-10-11T00:00:00.000Z
Reasoning: This previously reported copper intercept shows a moderate grade over a narrow width, but has low novelty.
Positive factors
- Moderate copper grade for VMS deposit type
- QA/QC procedures disclosed
- Compositing parameters transparent
Negative factors
- Result is previously reported, low novelty
Evidence · table
“1.0”
Context: 4.3
Tags used in scoring
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "1 A N N O U N C E M E N T QMINES DISCOVERS COPPER SULPHIDES 180M BEYOND MT CHALMERS RESOURCE HIGHLIGHTS • New Copper Dis"
Rejected tags
Rejected tags — excluded from scoring because their label or evidence could not be verified.
Stale Data Re-releaseRejected · negative
Historical results re-announced with no new assays or reinterpretation — low genuine novelty.
Reason: The intercept is explicitly marked as 'Previously reported' in the table.
Evidence · table
“Previously reported”
Context: 26MCDD003
QA/QC DisclosedRejected · positive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Reason: The JORC table details internal QA/QC review by QMines technical personnel and the Competent Person.
Evidence · text
“Drilling, logging, sampling, assay and QAQC data were internally reviewed by QMines technical personnel and the Competent Person.”
Compositing TransparentRejected · positive
Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Reason: The table specifies a 0.20% Cu lower cut off and maximum 2m internal dilution for the reported intercepts.
Evidence · text
“0.20% Cu lower cut off, maximum 2m internal dilution.”
26MCDD003Mt Chalmers West · goldGrade: 1.7Grade Unit: g/tIntercept: 4.3 mHistorical resultNeeds review: historical_restatementView all detailsHide details
Identity
- Hole ID
- 26MCDD003
- Project
- Mt Chalmers West
- Commodity
- gold
- Region
- australia_qld
- Reported Region
- australia_qld
- Ticker
- QML
Geometry
- Grade
- 1.7
- Grade Unit
- g/t
- Intercept
- 4.3 m
- From
- 20 m
- To
- 24.5 m
- Hole Depth
- 102 m
- Intercept Depth
- 20 m
Classification
- Deposit Type
- vms
- Program
- exploration
- Sample Type
- drill
- Group ID
- 26MCDD003:20-24.5
- Mining Method
- unknown
Location
- Easting
- 259733
- Northing
- 7421242
- CRS
- UTM
- Elevation
- 96 m
- Azimuth
- 100 °
- Dip
- -60 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Brisbane
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
Deleterious
- Deleterious Flag
- No
Compositing
- Cutoff Grade
- 0.2
- Cutoff Unit
- % Cu
- Dilution Disclosed
- Yes
- Max Dilution
- 2 m
Review
- Needs Review
- Yes
- Review Reason
- historical_restatement
- Interp. Status
- scored
- Historical
- Yes
Dates
- Event date
- 2026-10-11T00:00:00.000Z
Reasoning: This previously reported gold intercept shows a moderate grade over a narrow width, but has low novelty.
Positive factors
- Moderate gold grade for VMS deposit type
- QA/QC procedures disclosed
- Compositing parameters transparent
Negative factors
- Result is previously reported, low novelty
Evidence · table
“1.7”
Context: 4.3
Tags used in scoring
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "1 A N N O U N C E M E N T QMINES DISCOVERS COPPER SULPHIDES 180M BEYOND MT CHALMERS RESOURCE HIGHLIGHTS • New Copper Dis"
Rejected tags
Rejected tags — excluded from scoring because their label or evidence could not be verified.
Stale Data Re-releaseRejected · negative
Historical results re-announced with no new assays or reinterpretation — low genuine novelty.
Reason: The intercept is explicitly marked as 'Previously reported' in the table.
Evidence · table
“Previously reported”
Context: 26MCDD003
QA/QC DisclosedRejected · positive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Reason: The JORC table details internal QA/QC review by QMines technical personnel and the Competent Person.
Evidence · text
“Drilling, logging, sampling, assay and QAQC data were internally reviewed by QMines technical personnel and the Competent Person.”
Compositing TransparentRejected · positive
Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Reason: The table specifies a 0.20% Cu lower cut off and maximum 2m internal dilution for the reported intercepts.
Evidence · text
“0.20% Cu lower cut off, maximum 2m internal dilution.”
26MCDD003Mt Chalmers West · zincGrade: 8.9Grade Unit: %Intercept: 4.3 mHistorical resultNeeds review: historical_restatementView all detailsHide details
Identity
- Hole ID
- 26MCDD003
- Project
- Mt Chalmers West
- Commodity
- zinc
- Region
- australia_qld
- Reported Region
- australia_qld
- Ticker
- QML
Geometry
- Grade
- 8.9
- Grade Unit
- %
- Intercept
- 4.3 m
- From
- 20 m
- To
- 24.5 m
- Hole Depth
- 102 m
- Intercept Depth
- 20 m
Classification
- Deposit Type
- vms
- Program
- exploration
- Sample Type
- drill
- Group ID
- 26MCDD003:20-24.5
- Mining Method
- unknown
Location
- Easting
- 259733
- Northing
- 7421242
- CRS
- UTM
- Elevation
- 96 m
- Azimuth
- 100 °
- Dip
- -60 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Brisbane
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
Deleterious
- Deleterious Flag
- No
Compositing
- Cutoff Grade
- 0.2
- Cutoff Unit
- % Cu
- Dilution Disclosed
- Yes
- Max Dilution
- 2 m
Review
- Needs Review
- Yes
- Review Reason
- historical_restatement
- Interp. Status
- scored
- Historical
- Yes
Dates
- Event date
- 2026-10-11T00:00:00.000Z
Reasoning: This previously reported zinc intercept shows a moderate grade over a narrow width, but has low novelty.
Positive factors
- Moderate zinc grade for VMS deposit type
- QA/QC procedures disclosed
- Compositing parameters transparent
Negative factors
- Result is previously reported, low novelty
Evidence · table
“8.9”
Context: 4.3
Tags used in scoring
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "1 A N N O U N C E M E N T QMINES DISCOVERS COPPER SULPHIDES 180M BEYOND MT CHALMERS RESOURCE HIGHLIGHTS • New Copper Dis"
Rejected tags
Rejected tags — excluded from scoring because their label or evidence could not be verified.
Stale Data Re-releaseRejected · negative
Historical results re-announced with no new assays or reinterpretation — low genuine novelty.
Reason: The intercept is explicitly marked as 'Previously reported' in the table.
Evidence · table
“Previously reported”
Context: 26MCDD003
QA/QC DisclosedRejected · positive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Reason: The JORC table details internal QA/QC review by QMines technical personnel and the Competent Person.
Evidence · text
“Drilling, logging, sampling, assay and QAQC data were internally reviewed by QMines technical personnel and the Competent Person.”
Compositing TransparentRejected · positive
Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Reason: The table specifies a 0.20% Cu lower cut off and maximum 2m internal dilution for the reported intercepts.
Evidence · text
“0.20% Cu lower cut off, maximum 2m internal dilution.”
26MCDD003Mt Chalmers West · leadGrade: 3.7Grade Unit: %Intercept: 4.3 mHistorical resultNeeds review: historical_restatementView all detailsHide details
Identity
- Hole ID
- 26MCDD003
- Project
- Mt Chalmers West
- Commodity
- lead
- Region
- australia_qld
- Reported Region
- australia_qld
- Ticker
- QML
Geometry
- Grade
- 3.7
- Grade Unit
- %
- Intercept
- 4.3 m
- From
- 20 m
- To
- 24.5 m
- Hole Depth
- 102 m
- Intercept Depth
- 20 m
Classification
- Deposit Type
- vms
- Program
- exploration
- Sample Type
- drill
- Group ID
- 26MCDD003:20-24.5
- Mining Method
- unknown
Location
- Easting
- 259733
- Northing
- 7421242
- CRS
- UTM
- Elevation
- 96 m
- Azimuth
- 100 °
- Dip
- -60 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Brisbane
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
Deleterious
- Deleterious Flag
- No
Compositing
- Cutoff Grade
- 0.2
- Cutoff Unit
- % Cu
- Dilution Disclosed
- Yes
- Max Dilution
- 2 m
Review
- Needs Review
- Yes
- Review Reason
- historical_restatement
- Interp. Status
- scored
- Historical
- Yes
Dates
- Event date
- 2026-10-11T00:00:00.000Z
Reasoning: This previously reported lead intercept shows a moderate grade over a narrow width, but has low novelty.
Positive factors
- Moderate lead grade for VMS deposit type
- QA/QC procedures disclosed
- Compositing parameters transparent
Negative factors
- Result is previously reported, low novelty
Evidence · table
“3.7”
Context: 4.3
Tags used in scoring
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "1 A N N O U N C E M E N T QMINES DISCOVERS COPPER SULPHIDES 180M BEYOND MT CHALMERS RESOURCE HIGHLIGHTS • New Copper Dis"
Rejected tags
Rejected tags — excluded from scoring because their label or evidence could not be verified.
Stale Data Re-releaseRejected · negative
Historical results re-announced with no new assays or reinterpretation — low genuine novelty.
Reason: The intercept is explicitly marked as 'Previously reported' in the table.
Evidence · table
“Previously reported”
Context: 26MCDD003
QA/QC DisclosedRejected · positive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Reason: The JORC table details internal QA/QC review by QMines technical personnel and the Competent Person.
Evidence · text
“Drilling, logging, sampling, assay and QAQC data were internally reviewed by QMines technical personnel and the Competent Person.”
Compositing TransparentRejected · positive
Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Reason: The table specifies a 0.20% Cu lower cut off and maximum 2m internal dilution for the reported intercepts.
Evidence · text
“0.20% Cu lower cut off, maximum 2m internal dilution.”
26MCDD003Mt Chalmers West · silverGrade: 57Grade Unit: g/tIntercept: 4.3 mHistorical resultNeeds review: historical_restatementView all detailsHide details
Identity
- Hole ID
- 26MCDD003
- Project
- Mt Chalmers West
- Commodity
- silver
- Region
- australia_qld
- Reported Region
- australia_qld
- Ticker
- QML
Geometry
- Grade
- 57
- Grade Unit
- g/t
- Intercept
- 4.3 m
- From
- 20 m
- To
- 24.5 m
- Hole Depth
- 102 m
- Intercept Depth
- 20 m
Classification
- Deposit Type
- vms
- Program
- exploration
- Sample Type
- drill
- Group ID
- 26MCDD003:20-24.5
- Mining Method
- unknown
Location
- Easting
- 259733
- Northing
- 7421242
- CRS
- UTM
- Elevation
- 96 m
- Azimuth
- 100 °
- Dip
- -60 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Brisbane
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
Deleterious
- Deleterious Flag
- No
Compositing
- Cutoff Grade
- 0.2
- Cutoff Unit
- % Cu
- Dilution Disclosed
- Yes
- Max Dilution
- 2 m
Review
- Needs Review
- Yes
- Review Reason
- historical_restatement
- Interp. Status
- scored
- Historical
- Yes
Dates
- Event date
- 2026-10-11T00:00:00.000Z
Reasoning: This previously reported silver intercept shows a moderate grade over a narrow width, but has low novelty.
Positive factors
- Moderate silver grade for VMS deposit type
- QA/QC procedures disclosed
- Compositing parameters transparent
Negative factors
- Result is previously reported, low novelty
Evidence · table
“57”
Context: 4.3
Tags used in scoring
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "1 A N N O U N C E M E N T QMINES DISCOVERS COPPER SULPHIDES 180M BEYOND MT CHALMERS RESOURCE HIGHLIGHTS • New Copper Dis"
Rejected tags
Rejected tags — excluded from scoring because their label or evidence could not be verified.
Stale Data Re-releaseRejected · negative
Historical results re-announced with no new assays or reinterpretation — low genuine novelty.
Reason: The intercept is explicitly marked as 'Previously reported' in the table.
Evidence · table
“Previously reported”
Context: 26MCDD003
QA/QC DisclosedRejected · positive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Reason: The JORC table details internal QA/QC review by QMines technical personnel and the Competent Person.
Evidence · text
“Drilling, logging, sampling, assay and QAQC data were internally reviewed by QMines technical personnel and the Competent Person.”
Compositing TransparentRejected · positive
Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Reason: The table specifies a 0.20% Cu lower cut off and maximum 2m internal dilution for the reported intercepts.
Evidence · text
“0.20% Cu lower cut off, maximum 2m internal dilution.”
26MCDD003Mt Chalmers West · copperGrade: 0.5Grade Unit: %Intercept: 5.5 mHistorical resultNeeds review: historical_restatementView all detailsHide details
Identity
- Hole ID
- 26MCDD003
- Project
- Mt Chalmers West
- Commodity
- copper
- Region
- australia_qld
- Reported Region
- australia_qld
- Ticker
- QML
Geometry
- Grade
- 0.5
- Grade Unit
- %
- Intercept
- 5.5 m
- From
- 28.5 m
- To
- 34 m
- Hole Depth
- 102 m
- Intercept Depth
- 28.5 m
Classification
- Deposit Type
- vms
- Program
- exploration
- Sample Type
- drill
- Group ID
- 26MCDD003:28.5-34
- Mining Method
- unknown
Location
- Easting
- 259733
- Northing
- 7421242
- CRS
- UTM
- Elevation
- 96 m
- Azimuth
- 100 °
- Dip
- -60 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Brisbane
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
Deleterious
- Deleterious Flag
- No
Compositing
- Cutoff Grade
- 0.2
- Cutoff Unit
- % Cu
- Dilution Disclosed
- Yes
- Max Dilution
- 2 m
Review
- Needs Review
- Yes
- Review Reason
- historical_restatement
- Interp. Status
- scored
- Historical
- Yes
Dates
- Event date
- 2026-10-11T00:00:00.000Z
Reasoning: This previously reported copper intercept shows a moderate grade over a narrow width, but has low novelty.
Positive factors
- Moderate copper grade for VMS deposit type
- QA/QC procedures disclosed
- Compositing parameters transparent
Negative factors
- Result is previously reported, low novelty
Evidence · table
“0.5”
Context: 5.5
Tags used in scoring
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "1 A N N O U N C E M E N T QMINES DISCOVERS COPPER SULPHIDES 180M BEYOND MT CHALMERS RESOURCE HIGHLIGHTS • New Copper Dis"
Rejected tags
Rejected tags — excluded from scoring because their label or evidence could not be verified.
Stale Data Re-releaseRejected · negative
Historical results re-announced with no new assays or reinterpretation — low genuine novelty.
Reason: The intercept is explicitly marked as 'Previously reported' in the table.
Evidence · table
“Previously reported”
Context: 26MCDD003
QA/QC DisclosedRejected · positive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Reason: The JORC table details internal QA/QC review by QMines technical personnel and the Competent Person.
Evidence · text
“Drilling, logging, sampling, assay and QAQC data were internally reviewed by QMines technical personnel and the Competent Person.”
Compositing TransparentRejected · positive
Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Reason: The table specifies a 0.20% Cu lower cut off and maximum 2m internal dilution for the reported intercepts.
Evidence · text
“0.20% Cu lower cut off, maximum 2m internal dilution.”
26MCDD003Mt Chalmers West · goldGrade: 2.5Grade Unit: g/tIntercept: 5.5 mHistorical resultNeeds review: historical_restatementView all detailsHide details
Identity
- Hole ID
- 26MCDD003
- Project
- Mt Chalmers West
- Commodity
- gold
- Region
- australia_qld
- Reported Region
- australia_qld
- Ticker
- QML
Geometry
- Grade
- 2.5
- Grade Unit
- g/t
- Intercept
- 5.5 m
- From
- 28.5 m
- To
- 34 m
- Hole Depth
- 102 m
- Intercept Depth
- 28.5 m
Classification
- Deposit Type
- vms
- Program
- exploration
- Sample Type
- drill
- Group ID
- 26MCDD003:28.5-34
- Mining Method
- unknown
Location
- Easting
- 259733
- Northing
- 7421242
- CRS
- UTM
- Elevation
- 96 m
- Azimuth
- 100 °
- Dip
- -60 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Brisbane
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
Deleterious
- Deleterious Flag
- No
Compositing
- Cutoff Grade
- 0.2
- Cutoff Unit
- % Cu
- Dilution Disclosed
- Yes
- Max Dilution
- 2 m
Review
- Needs Review
- Yes
- Review Reason
- historical_restatement
- Interp. Status
- scored
- Historical
- Yes
Dates
- Event date
- 2026-10-11T00:00:00.000Z
Reasoning: This previously reported gold intercept shows a strong grade over a narrow width, but has low novelty.
Positive factors
- Strong gold grade for VMS deposit type
- QA/QC procedures disclosed
- Compositing parameters transparent
Negative factors
- Result is previously reported, low novelty
Evidence · table
“2.5”
Context: 5.5
Tags used in scoring
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "1 A N N O U N C E M E N T QMINES DISCOVERS COPPER SULPHIDES 180M BEYOND MT CHALMERS RESOURCE HIGHLIGHTS • New Copper Dis"
Rejected tags
Rejected tags — excluded from scoring because their label or evidence could not be verified.
Stale Data Re-releaseRejected · negative
Historical results re-announced with no new assays or reinterpretation — low genuine novelty.
Reason: The intercept is explicitly marked as 'Previously reported' in the table.
Evidence · table
“Previously reported”
Context: 26MCDD003
QA/QC DisclosedRejected · positive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Reason: The JORC table details internal QA/QC review by QMines technical personnel and the Competent Person.
Evidence · text
“Drilling, logging, sampling, assay and QAQC data were internally reviewed by QMines technical personnel and the Competent Person.”
Compositing TransparentRejected · positive
Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Reason: The table specifies a 0.20% Cu lower cut off and maximum 2m internal dilution for the reported intercepts.
Evidence · text
“0.20% Cu lower cut off, maximum 2m internal dilution.”
26MCDD003Mt Chalmers West · zincGrade: 11.4Grade Unit: %Intercept: 5.5 mHistorical resultNeeds review: historical_restatementView all detailsHide details
Identity
- Hole ID
- 26MCDD003
- Project
- Mt Chalmers West
- Commodity
- zinc
- Region
- australia_qld
- Reported Region
- australia_qld
- Ticker
- QML
Geometry
- Grade
- 11.4
- Grade Unit
- %
- Intercept
- 5.5 m
- From
- 28.5 m
- To
- 34 m
- Hole Depth
- 102 m
- Intercept Depth
- 28.5 m
Classification
- Deposit Type
- vms
- Program
- exploration
- Sample Type
- drill
- Group ID
- 26MCDD003:28.5-34
- Mining Method
- unknown
Location
- Easting
- 259733
- Northing
- 7421242
- CRS
- UTM
- Elevation
- 96 m
- Azimuth
- 100 °
- Dip
- -60 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Brisbane
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
Deleterious
- Deleterious Flag
- No
Compositing
- Cutoff Grade
- 0.2
- Cutoff Unit
- % Cu
- Dilution Disclosed
- Yes
- Max Dilution
- 2 m
Review
- Needs Review
- Yes
- Review Reason
- historical_restatement
- Interp. Status
- scored
- Historical
- Yes
Dates
- Event date
- 2026-10-11T00:00:00.000Z
Reasoning: This previously reported zinc intercept shows a strong grade over a narrow width, but has low novelty.
Positive factors
- Strong zinc grade for VMS deposit type
- QA/QC procedures disclosed
- Compositing parameters transparent
Negative factors
- Result is previously reported, low novelty
Evidence · table
“11.4”
Context: 5.5
Tags used in scoring
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "1 A N N O U N C E M E N T QMINES DISCOVERS COPPER SULPHIDES 180M BEYOND MT CHALMERS RESOURCE HIGHLIGHTS • New Copper Dis"
Rejected tags
Rejected tags — excluded from scoring because their label or evidence could not be verified.
Stale Data Re-releaseRejected · negative
Historical results re-announced with no new assays or reinterpretation — low genuine novelty.
Reason: The intercept is explicitly marked as 'Previously reported' in the table.
Evidence · table
“Previously reported”
Context: 26MCDD003
QA/QC DisclosedRejected · positive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Reason: The JORC table details internal QA/QC review by QMines technical personnel and the Competent Person.
Evidence · text
“Drilling, logging, sampling, assay and QAQC data were internally reviewed by QMines technical personnel and the Competent Person.”
Compositing TransparentRejected · positive
Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Reason: The table specifies a 0.20% Cu lower cut off and maximum 2m internal dilution for the reported intercepts.
Evidence · text
“0.20% Cu lower cut off, maximum 2m internal dilution.”
26MCDD003Mt Chalmers West · leadGrade: 4.7Grade Unit: %Intercept: 5.5 mHistorical resultNeeds review: historical_restatementView all detailsHide details
Identity
- Hole ID
- 26MCDD003
- Project
- Mt Chalmers West
- Commodity
- lead
- Region
- australia_qld
- Reported Region
- australia_qld
- Ticker
- QML
Geometry
- Grade
- 4.7
- Grade Unit
- %
- Intercept
- 5.5 m
- From
- 28.5 m
- To
- 34 m
- Hole Depth
- 102 m
- Intercept Depth
- 28.5 m
Classification
- Deposit Type
- vms
- Program
- exploration
- Sample Type
- drill
- Group ID
- 26MCDD003:28.5-34
- Mining Method
- unknown
Location
- Easting
- 259733
- Northing
- 7421242
- CRS
- UTM
- Elevation
- 96 m
- Azimuth
- 100 °
- Dip
- -60 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Brisbane
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
Deleterious
- Deleterious Flag
- No
Compositing
- Cutoff Grade
- 0.2
- Cutoff Unit
- % Cu
- Dilution Disclosed
- Yes
- Max Dilution
- 2 m
Review
- Needs Review
- Yes
- Review Reason
- historical_restatement
- Interp. Status
- scored
- Historical
- Yes
Dates
- Event date
- 2026-10-11T00:00:00.000Z
Reasoning: This previously reported lead intercept shows a moderate grade over a narrow width, but has low novelty.
Positive factors
- Moderate lead grade for VMS deposit type
- QA/QC procedures disclosed
- Compositing parameters transparent
Negative factors
- Result is previously reported, low novelty
Evidence · table
“4.7”
Context: 5.5
Tags used in scoring
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "1 A N N O U N C E M E N T QMINES DISCOVERS COPPER SULPHIDES 180M BEYOND MT CHALMERS RESOURCE HIGHLIGHTS • New Copper Dis"
Rejected tags
Rejected tags — excluded from scoring because their label or evidence could not be verified.
Stale Data Re-releaseRejected · negative
Historical results re-announced with no new assays or reinterpretation — low genuine novelty.
Reason: The intercept is explicitly marked as 'Previously reported' in the table.
Evidence · table
“Previously reported”
Context: 26MCDD003
QA/QC DisclosedRejected · positive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Reason: The JORC table details internal QA/QC review by QMines technical personnel and the Competent Person.
Evidence · text
“Drilling, logging, sampling, assay and QAQC data were internally reviewed by QMines technical personnel and the Competent Person.”
Compositing TransparentRejected · positive
Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Reason: The table specifies a 0.20% Cu lower cut off and maximum 2m internal dilution for the reported intercepts.
Evidence · text
“0.20% Cu lower cut off, maximum 2m internal dilution.”
26MCDD003Mt Chalmers West · silverGrade: 29Grade Unit: g/tIntercept: 5.5 mHistorical resultNeeds review: historical_restatementView all detailsHide details
Identity
- Hole ID
- 26MCDD003
- Project
- Mt Chalmers West
- Commodity
- silver
- Region
- australia_qld
- Reported Region
- australia_qld
- Ticker
- QML
Geometry
- Grade
- 29
- Grade Unit
- g/t
- Intercept
- 5.5 m
- From
- 28.5 m
- To
- 34 m
- Hole Depth
- 102 m
- Intercept Depth
- 28.5 m
Classification
- Deposit Type
- vms
- Program
- exploration
- Sample Type
- drill
- Group ID
- 26MCDD003:28.5-34
- Mining Method
- unknown
Location
- Easting
- 259733
- Northing
- 7421242
- CRS
- UTM
- Elevation
- 96 m
- Azimuth
- 100 °
- Dip
- -60 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Brisbane
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
Deleterious
- Deleterious Flag
- No
Compositing
- Cutoff Grade
- 0.2
- Cutoff Unit
- % Cu
- Dilution Disclosed
- Yes
- Max Dilution
- 2 m
Review
- Needs Review
- Yes
- Review Reason
- historical_restatement
- Interp. Status
- scored
- Historical
- Yes
Dates
- Event date
- 2026-10-11T00:00:00.000Z
Reasoning: This previously reported silver intercept shows a moderate grade over a narrow width, but has low novelty.
Positive factors
- Moderate silver grade for VMS deposit type
- QA/QC procedures disclosed
- Compositing parameters transparent
Negative factors
- Result is previously reported, low novelty
Evidence · table
“29”
Context: 5.5
Tags used in scoring
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "1 A N N O U N C E M E N T QMINES DISCOVERS COPPER SULPHIDES 180M BEYOND MT CHALMERS RESOURCE HIGHLIGHTS • New Copper Dis"
Rejected tags
Rejected tags — excluded from scoring because their label or evidence could not be verified.
Stale Data Re-releaseRejected · negative
Historical results re-announced with no new assays or reinterpretation — low genuine novelty.
Reason: The intercept is explicitly marked as 'Previously reported' in the table.
Evidence · table
“Previously reported”
Context: 26MCDD003
QA/QC DisclosedRejected · positive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Reason: The JORC table details internal QA/QC review by QMines technical personnel and the Competent Person.
Evidence · text
“Drilling, logging, sampling, assay and QAQC data were internally reviewed by QMines technical personnel and the Competent Person.”
Compositing TransparentRejected · positive
Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Reason: The table specifies a 0.20% Cu lower cut off and maximum 2m internal dilution for the reported intercepts.
Evidence · text
“0.20% Cu lower cut off, maximum 2m internal dilution.”
26MCDD003Mt Chalmers West · copperGrade: 1.7Grade Unit: %Intercept: 18 mHistorical resultNeeds review: historical_restatementView all detailsHide details
Identity
- Hole ID
- 26MCDD003
- Project
- Mt Chalmers West
- Commodity
- copper
- Region
- australia_qld
- Reported Region
- australia_qld
- Ticker
- QML
Geometry
- Grade
- 1.7
- Grade Unit
- %
- Intercept
- 18 m
- From
- 54 m
- To
- 72 m
- Hole Depth
- 102 m
- Intercept Depth
- 54 m
Classification
- Deposit Type
- vms
- Program
- exploration
- Sample Type
- drill
- Group ID
- 26MCDD003:54-72
- Mining Method
- unknown
Location
- Easting
- 259733
- Northing
- 7421242
- CRS
- UTM
- Elevation
- 96 m
- Azimuth
- 100 °
- Dip
- -60 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Brisbane
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
Deleterious
- Deleterious Flag
- No
Compositing
- Cutoff Grade
- 0.2
- Cutoff Unit
- % Cu
- Dilution Disclosed
- Yes
- Max Dilution
- 2 m
Review
- Needs Review
- Yes
- Review Reason
- historical_restatement
- Interp. Status
- scored
- Historical
- Yes
Dates
- Event date
- 2026-10-11T00:00:00.000Z
Reasoning: This previously reported copper intercept shows a moderate grade over a moderate width, but has low novelty.
Positive factors
- Moderate copper grade for VMS deposit type
- Moderate intercept length (18m)
- QA/QC procedures disclosed
- Compositing parameters transparent
Negative factors
- Result is previously reported, low novelty
Evidence · table
“1.7”
Context: 18.0
Tags used in scoring
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "1 A N N O U N C E M E N T QMINES DISCOVERS COPPER SULPHIDES 180M BEYOND MT CHALMERS RESOURCE HIGHLIGHTS • New Copper Dis"
Rejected tags
Rejected tags — excluded from scoring because their label or evidence could not be verified.
Stale Data Re-releaseRejected · negative
Historical results re-announced with no new assays or reinterpretation — low genuine novelty.
Reason: The intercept is explicitly marked as 'Previously reported' in the table.
Evidence · table
“Previously reported”
Context: 26MCDD003
QA/QC DisclosedRejected · positive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Reason: The JORC table details internal QA/QC review by QMines technical personnel and the Competent Person.
Evidence · text
“Drilling, logging, sampling, assay and QAQC data were internally reviewed by QMines technical personnel and the Competent Person.”
Compositing TransparentRejected · positive
Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Reason: The table specifies a 0.20% Cu lower cut off and maximum 2m internal dilution for the reported intercepts.
Evidence · text
“0.20% Cu lower cut off, maximum 2m internal dilution.”
26MCDD003Mt Chalmers West · goldGrade: 2.7Grade Unit: g/tIntercept: 18 mHistorical resultNeeds review: historical_restatementView all detailsHide details
Identity
- Hole ID
- 26MCDD003
- Project
- Mt Chalmers West
- Commodity
- gold
- Region
- australia_qld
- Reported Region
- australia_qld
- Ticker
- QML
Geometry
- Grade
- 2.7
- Grade Unit
- g/t
- Intercept
- 18 m
- From
- 54 m
- To
- 72 m
- Hole Depth
- 102 m
- Intercept Depth
- 54 m
Classification
- Deposit Type
- vms
- Program
- exploration
- Sample Type
- drill
- Group ID
- 26MCDD003:54-72
- Mining Method
- unknown
Location
- Easting
- 259733
- Northing
- 7421242
- CRS
- UTM
- Elevation
- 96 m
- Azimuth
- 100 °
- Dip
- -60 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Brisbane
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
Deleterious
- Deleterious Flag
- No
Compositing
- Cutoff Grade
- 0.2
- Cutoff Unit
- % Cu
- Dilution Disclosed
- Yes
- Max Dilution
- 2 m
Review
- Needs Review
- Yes
- Review Reason
- historical_restatement
- Interp. Status
- scored
- Historical
- Yes
Dates
- Event date
- 2026-10-11T00:00:00.000Z
Reasoning: This previously reported gold intercept shows a strong grade over a moderate width, but has low novelty.
Positive factors
- Strong gold grade for VMS deposit type
- Moderate intercept length (18m)
- QA/QC procedures disclosed
- Compositing parameters transparent
Negative factors
- Result is previously reported, low novelty
Evidence · table
“2.7”
Context: 18.0
Tags used in scoring
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "1 A N N O U N C E M E N T QMINES DISCOVERS COPPER SULPHIDES 180M BEYOND MT CHALMERS RESOURCE HIGHLIGHTS • New Copper Dis"
Rejected tags
Rejected tags — excluded from scoring because their label or evidence could not be verified.
Stale Data Re-releaseRejected · negative
Historical results re-announced with no new assays or reinterpretation — low genuine novelty.
Reason: The intercept is explicitly marked as 'Previously reported' in the table.
Evidence · table
“Previously reported”
Context: 26MCDD003
QA/QC DisclosedRejected · positive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Reason: The JORC table details internal QA/QC review by QMines technical personnel and the Competent Person.
Evidence · text
“Drilling, logging, sampling, assay and QAQC data were internally reviewed by QMines technical personnel and the Competent Person.”
Compositing TransparentRejected · positive
Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Reason: The table specifies a 0.20% Cu lower cut off and maximum 2m internal dilution for the reported intercepts.
Evidence · text
“0.20% Cu lower cut off, maximum 2m internal dilution.”
26MCDD003Mt Chalmers West · silverGrade: 2Grade Unit: g/tIntercept: 18 mHistorical resultNeeds review: historical_restatementView all detailsHide details
Identity
- Hole ID
- 26MCDD003
- Project
- Mt Chalmers West
- Commodity
- silver
- Region
- australia_qld
- Reported Region
- australia_qld
- Ticker
- QML
Geometry
- Grade
- 2
- Grade Unit
- g/t
- Intercept
- 18 m
- From
- 54 m
- To
- 72 m
- Hole Depth
- 102 m
- Intercept Depth
- 54 m
Classification
- Deposit Type
- vms
- Program
- exploration
- Sample Type
- drill
- Group ID
- 26MCDD003:54-72
- Mining Method
- unknown
Location
- Easting
- 259733
- Northing
- 7421242
- CRS
- UTM
- Elevation
- 96 m
- Azimuth
- 100 °
- Dip
- -60 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Brisbane
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
Deleterious
- Deleterious Flag
- No
Compositing
- Cutoff Grade
- 0.2
- Cutoff Unit
- % Cu
- Dilution Disclosed
- Yes
- Max Dilution
- 2 m
Review
- Needs Review
- Yes
- Review Reason
- historical_restatement
- Interp. Status
- scored
- Historical
- Yes
Dates
- Event date
- 2026-10-11T00:00:00.000Z
Reasoning: This previously reported silver intercept shows a very low grade over a moderate width, contributing little new information.
Positive factors
- QA/QC procedures disclosed
- Compositing parameters transparent
Negative factors
- Very low silver grade
- Result is previously reported, low novelty
Evidence · table
“2”
Context: 18.0
Tags used in scoring
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "1 A N N O U N C E M E N T QMINES DISCOVERS COPPER SULPHIDES 180M BEYOND MT CHALMERS RESOURCE HIGHLIGHTS • New Copper Dis"
Rejected tags
Rejected tags — excluded from scoring because their label or evidence could not be verified.
Stale Data Re-releaseRejected · negative
Historical results re-announced with no new assays or reinterpretation — low genuine novelty.
Reason: The intercept is explicitly marked as 'Previously reported' in the table.
Evidence · table
“Previously reported”
Context: 26MCDD003
QA/QC DisclosedRejected · positive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Reason: The JORC table details internal QA/QC review by QMines technical personnel and the Competent Person.
Evidence · text
“Drilling, logging, sampling, assay and QAQC data were internally reviewed by QMines technical personnel and the Competent Person.”
Compositing TransparentRejected · positive
Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Reason: The table specifies a 0.20% Cu lower cut off and maximum 2m internal dilution for the reported intercepts.
Evidence · text
“0.20% Cu lower cut off, maximum 2m internal dilution.”
26MCDD003Mt Chalmers West · copperGrade: 2Grade Unit: %Intercept: 12 mHistorical resultNeeds review: historical_restatementView all detailsHide details
Identity
- Hole ID
- 26MCDD003
- Project
- Mt Chalmers West
- Commodity
- copper
- Region
- australia_qld
- Reported Region
- australia_qld
- Ticker
- QML
Geometry
- Grade
- 2
- Grade Unit
- %
- Intercept
- 12 m
- From
- 54 m
- To
- 66 m
- Hole Depth
- 102 m
- Intercept Depth
- 54 m
Classification
- Deposit Type
- vms
- Program
- exploration
- Sample Type
- drill
- Group ID
- 26MCDD003:54-66
- Mining Method
- unknown
Location
- Easting
- 259733
- Northing
- 7421242
- CRS
- UTM
- Elevation
- 96 m
- Azimuth
- 100 °
- Dip
- -60 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Brisbane
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
Deleterious
- Deleterious Flag
- No
Compositing
- Cutoff Grade
- 0.2
- Cutoff Unit
- % Cu
- Dilution Disclosed
- Yes
- Max Dilution
- 2 m
Review
- Needs Review
- Yes
- Review Reason
- historical_restatement
- Interp. Status
- scored
- Historical
- Yes
Dates
- Event date
- 2026-10-11T00:00:00.000Z
Reasoning: This previously reported sub-interval shows a strong copper grade over a moderate width, but has low novelty.
Positive factors
- Strong copper grade for VMS deposit type
- Moderate intercept length (12m)
- QA/QC procedures disclosed
- Compositing parameters transparent
Negative factors
- Result is previously reported, low novelty
Evidence · table
“2.0”
Context: 12.0
Tags used in scoring
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "1 A N N O U N C E M E N T QMINES DISCOVERS COPPER SULPHIDES 180M BEYOND MT CHALMERS RESOURCE HIGHLIGHTS • New Copper Dis"
Rejected tags
Rejected tags — excluded from scoring because their label or evidence could not be verified.
Stale Data Re-releaseRejected · negative
Historical results re-announced with no new assays or reinterpretation — low genuine novelty.
Reason: The intercept is explicitly marked as 'Previously reported' in the table.
Evidence · table
“Previously reported”
Context: 26MCDD003
QA/QC DisclosedRejected · positive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Reason: The JORC table details internal QA/QC review by QMines technical personnel and the Competent Person.
Evidence · text
“Drilling, logging, sampling, assay and QAQC data were internally reviewed by QMines technical personnel and the Competent Person.”
Compositing TransparentRejected · positive
Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Reason: The table specifies a 0.20% Cu lower cut off and maximum 2m internal dilution for the reported intercepts.
Evidence · text
“0.20% Cu lower cut off, maximum 2m internal dilution.”
26MCDD003Mt Chalmers West · goldGrade: 3.8Grade Unit: g/tIntercept: 12 mHistorical resultNeeds review: historical_restatementView all detailsHide details
Identity
- Hole ID
- 26MCDD003
- Project
- Mt Chalmers West
- Commodity
- gold
- Region
- australia_qld
- Reported Region
- australia_qld
- Ticker
- QML
Geometry
- Grade
- 3.8
- Grade Unit
- g/t
- Intercept
- 12 m
- From
- 54 m
- To
- 66 m
- Hole Depth
- 102 m
- Intercept Depth
- 54 m
Classification
- Deposit Type
- vms
- Program
- exploration
- Sample Type
- drill
- Group ID
- 26MCDD003:54-66
- Mining Method
- unknown
Location
- Easting
- 259733
- Northing
- 7421242
- CRS
- UTM
- Elevation
- 96 m
- Azimuth
- 100 °
- Dip
- -60 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Brisbane
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
Deleterious
- Deleterious Flag
- No
Compositing
- Cutoff Grade
- 0.2
- Cutoff Unit
- % Cu
- Dilution Disclosed
- Yes
- Max Dilution
- 2 m
Review
- Needs Review
- Yes
- Review Reason
- historical_restatement
- Interp. Status
- scored
- Historical
- Yes
Dates
- Event date
- 2026-10-11T00:00:00.000Z
Reasoning: This previously reported sub-interval shows a strong gold grade over a moderate width, but has low novelty.
Positive factors
- Strong gold grade for VMS deposit type
- Moderate intercept length (12m)
- QA/QC procedures disclosed
- Compositing parameters transparent
Negative factors
- Result is previously reported, low novelty
Evidence · table
“3.8”
Context: 12.0
Tags used in scoring
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "1 A N N O U N C E M E N T QMINES DISCOVERS COPPER SULPHIDES 180M BEYOND MT CHALMERS RESOURCE HIGHLIGHTS • New Copper Dis"
Rejected tags
Rejected tags — excluded from scoring because their label or evidence could not be verified.
Stale Data Re-releaseRejected · negative
Historical results re-announced with no new assays or reinterpretation — low genuine novelty.
Reason: The intercept is explicitly marked as 'Previously reported' in the table.
Evidence · table
“Previously reported”
Context: 26MCDD003
QA/QC DisclosedRejected · positive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Reason: The JORC table details internal QA/QC review by QMines technical personnel and the Competent Person.
Evidence · text
“Drilling, logging, sampling, assay and QAQC data were internally reviewed by QMines technical personnel and the Competent Person.”
Compositing TransparentRejected · positive
Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Reason: The table specifies a 0.20% Cu lower cut off and maximum 2m internal dilution for the reported intercepts.
Evidence · text
“0.20% Cu lower cut off, maximum 2m internal dilution.”
26MCDD003Mt Chalmers West · silverGrade: 2Grade Unit: g/tIntercept: 12 mHistorical resultNeeds review: historical_restatementView all detailsHide details
Identity
- Hole ID
- 26MCDD003
- Project
- Mt Chalmers West
- Commodity
- silver
- Region
- australia_qld
- Reported Region
- australia_qld
- Ticker
- QML
Geometry
- Grade
- 2
- Grade Unit
- g/t
- Intercept
- 12 m
- From
- 54 m
- To
- 66 m
- Hole Depth
- 102 m
- Intercept Depth
- 54 m
Classification
- Deposit Type
- vms
- Program
- exploration
- Sample Type
- drill
- Group ID
- 26MCDD003:54-66
- Mining Method
- unknown
Location
- Easting
- 259733
- Northing
- 7421242
- CRS
- UTM
- Elevation
- 96 m
- Azimuth
- 100 °
- Dip
- -60 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Brisbane
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
Deleterious
- Deleterious Flag
- No
Compositing
- Cutoff Grade
- 0.2
- Cutoff Unit
- % Cu
- Dilution Disclosed
- Yes
- Max Dilution
- 2 m
Review
- Needs Review
- Yes
- Review Reason
- historical_restatement
- Interp. Status
- scored
- Historical
- Yes
Dates
- Event date
- 2026-10-11T00:00:00.000Z
Reasoning: This previously reported sub-interval shows a very low silver grade over a moderate width, contributing little new information.
Positive factors
- QA/QC procedures disclosed
- Compositing parameters transparent
Negative factors
- Very low silver grade
- Result is previously reported, low novelty
Evidence · table
“2”
Context: 12.0
Tags used in scoring
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "1 A N N O U N C E M E N T QMINES DISCOVERS COPPER SULPHIDES 180M BEYOND MT CHALMERS RESOURCE HIGHLIGHTS • New Copper Dis"
Rejected tags
Rejected tags — excluded from scoring because their label or evidence could not be verified.
Stale Data Re-releaseRejected · negative
Historical results re-announced with no new assays or reinterpretation — low genuine novelty.
Reason: The intercept is explicitly marked as 'Previously reported' in the table.
Evidence · table
“Previously reported”
Context: 26MCDD003
QA/QC DisclosedRejected · positive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Reason: The JORC table details internal QA/QC review by QMines technical personnel and the Competent Person.
Evidence · text
“Drilling, logging, sampling, assay and QAQC data were internally reviewed by QMines technical personnel and the Competent Person.”
Compositing TransparentRejected · positive
Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Reason: The table specifies a 0.20% Cu lower cut off and maximum 2m internal dilution for the reported intercepts.
Evidence · text
“0.20% Cu lower cut off, maximum 2m internal dilution.”
26MCDD003Mt Chalmers West · copperGrade: 3.3Grade Unit: %Intercept: 1 mHistorical resultNeeds review: historical_restatementView all detailsHide details
Identity
- Hole ID
- 26MCDD003
- Project
- Mt Chalmers West
- Commodity
- copper
- Region
- australia_qld
- Reported Region
- australia_qld
- Ticker
- QML
Geometry
- Grade
- 3.3
- Grade Unit
- %
- Intercept
- 1 m
- From
- 61 m
- To
- 62 m
- Hole Depth
- 102 m
- Intercept Depth
- 61 m
Classification
- Deposit Type
- vms
- Program
- exploration
- Sample Type
- drill
- Group ID
- 26MCDD003:61-62
- Mining Method
- unknown
Location
- Easting
- 259733
- Northing
- 7421242
- CRS
- UTM
- Elevation
- 96 m
- Azimuth
- 100 °
- Dip
- -60 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Brisbane
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
Deleterious
- Deleterious Flag
- No
Compositing
- Cutoff Grade
- 0.2
- Cutoff Unit
- % Cu
- Dilution Disclosed
- Yes
- Max Dilution
- 2 m
Review
- Needs Review
- Yes
- Review Reason
- historical_restatement
- Interp. Status
- scored
- Historical
- Yes
Dates
- Event date
- 2026-10-11T00:00:00.000Z
Reasoning: This previously reported sub-interval shows a strong copper grade over a very narrow width, but has low novelty.
Positive factors
- Strong copper grade for VMS deposit type
- QA/QC procedures disclosed
- Compositing parameters transparent
Negative factors
- Very narrow intercept length (1m)
- Result is previously reported, low novelty
Evidence · table
“3.3”
Context: 1.0
Tags used in scoring
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "1 A N N O U N C E M E N T QMINES DISCOVERS COPPER SULPHIDES 180M BEYOND MT CHALMERS RESOURCE HIGHLIGHTS • New Copper Dis"
Rejected tags
Rejected tags — excluded from scoring because their label or evidence could not be verified.
Stale Data Re-releaseRejected · negative
Historical results re-announced with no new assays or reinterpretation — low genuine novelty.
Reason: The intercept is explicitly marked as 'Previously reported' in the table.
Evidence · table
“Previously reported”
Context: 26MCDD003
QA/QC DisclosedRejected · positive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Reason: The JORC table details internal QA/QC review by QMines technical personnel and the Competent Person.
Evidence · text
“Drilling, logging, sampling, assay and QAQC data were internally reviewed by QMines technical personnel and the Competent Person.”
Compositing TransparentRejected · positive
Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Reason: The table specifies a 0.20% Cu lower cut off and maximum 2m internal dilution for the reported intercepts.
Evidence · text
“0.20% Cu lower cut off, maximum 2m internal dilution.”
26MCDD003Mt Chalmers West · goldGrade: 20.3Grade Unit: g/tIntercept: 1 mHistorical resultNeeds review: historical_restatementView all detailsHide details
Identity
- Hole ID
- 26MCDD003
- Project
- Mt Chalmers West
- Commodity
- gold
- Region
- australia_qld
- Reported Region
- australia_qld
- Ticker
- QML
Geometry
- Grade
- 20.3
- Grade Unit
- g/t
- Intercept
- 1 m
- From
- 61 m
- To
- 62 m
- Hole Depth
- 102 m
- Intercept Depth
- 61 m
Classification
- Deposit Type
- vms
- Program
- exploration
- Sample Type
- drill
- Group ID
- 26MCDD003:61-62
- Mining Method
- unknown
Location
- Easting
- 259733
- Northing
- 7421242
- CRS
- UTM
- Elevation
- 96 m
- Azimuth
- 100 °
- Dip
- -60 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Brisbane
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
Deleterious
- Deleterious Flag
- No
Compositing
- Cutoff Grade
- 0.2
- Cutoff Unit
- % Cu
- Dilution Disclosed
- Yes
- Max Dilution
- 2 m
Review
- Needs Review
- Yes
- Review Reason
- historical_restatement
- Interp. Status
- scored
- Historical
- Yes
Dates
- Event date
- 2026-10-11T00:00:00.000Z
Reasoning: This previously reported sub-interval shows an exceptional gold grade over a very narrow width, indicating high-grade mineralization, but has low novelty.
Positive factors
- Exceptional gold grade for VMS deposit type
- QA/QC procedures disclosed
- Compositing parameters transparent
Negative factors
- Very narrow intercept length (1m)
- Result is previously reported, low novelty
Evidence · table
“20.3”
Context: 1.0
Tags used in scoring
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "1 A N N O U N C E M E N T QMINES DISCOVERS COPPER SULPHIDES 180M BEYOND MT CHALMERS RESOURCE HIGHLIGHTS • New Copper Dis"
Rejected tags
Rejected tags — excluded from scoring because their label or evidence could not be verified.
Stale Data Re-releaseRejected · negative
Historical results re-announced with no new assays or reinterpretation — low genuine novelty.
Reason: The intercept is explicitly marked as 'Previously reported' in the table.
Evidence · table
“Previously reported”
Context: 26MCDD003
QA/QC DisclosedRejected · positive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Reason: The JORC table details internal QA/QC review by QMines technical personnel and the Competent Person.
Evidence · text
“Drilling, logging, sampling, assay and QAQC data were internally reviewed by QMines technical personnel and the Competent Person.”
Compositing TransparentRejected · positive
Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Reason: The table specifies a 0.20% Cu lower cut off and maximum 2m internal dilution for the reported intercepts.
Evidence · text
“0.20% Cu lower cut off, maximum 2m internal dilution.”
Bonanza InterceptRejected · positive
Exceptionally high-grade zone, well above the deposit-type norm.
Reason: The gold grade of 20.3 g/t is well above the exceptional threshold of 5 g/t for VMS deposits.
Evidence · table
“20.3”
Context: 1.0
26MCDD003Mt Chalmers West · silverGrade: 5Grade Unit: g/tIntercept: 1 mHistorical resultNeeds review: historical_restatementView all detailsHide details
Identity
- Hole ID
- 26MCDD003
- Project
- Mt Chalmers West
- Commodity
- silver
- Region
- australia_qld
- Reported Region
- australia_qld
- Ticker
- QML
Geometry
- Grade
- 5
- Grade Unit
- g/t
- Intercept
- 1 m
- From
- 61 m
- To
- 62 m
- Hole Depth
- 102 m
- Intercept Depth
- 61 m
Classification
- Deposit Type
- vms
- Program
- exploration
- Sample Type
- drill
- Group ID
- 26MCDD003:61-62
- Mining Method
- unknown
Location
- Easting
- 259733
- Northing
- 7421242
- CRS
- UTM
- Elevation
- 96 m
- Azimuth
- 100 °
- Dip
- -60 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Brisbane
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
Deleterious
- Deleterious Flag
- No
Compositing
- Cutoff Grade
- 0.2
- Cutoff Unit
- % Cu
- Dilution Disclosed
- Yes
- Max Dilution
- 2 m
Review
- Needs Review
- Yes
- Review Reason
- historical_restatement
- Interp. Status
- scored
- Historical
- Yes
Dates
- Event date
- 2026-10-11T00:00:00.000Z
Reasoning: This previously reported sub-interval shows a very low silver grade over a very narrow width, contributing little new information.
Positive factors
- QA/QC procedures disclosed
- Compositing parameters transparent
Negative factors
- Very low silver grade
- Very narrow intercept length (1m)
- Result is previously reported, low novelty
Evidence · table
“5”
Context: 1.0
Tags used in scoring
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "1 A N N O U N C E M E N T QMINES DISCOVERS COPPER SULPHIDES 180M BEYOND MT CHALMERS RESOURCE HIGHLIGHTS • New Copper Dis"
Rejected tags
Rejected tags — excluded from scoring because their label or evidence could not be verified.
Stale Data Re-releaseRejected · negative
Historical results re-announced with no new assays or reinterpretation — low genuine novelty.
Reason: The intercept is explicitly marked as 'Previously reported' in the table.
Evidence · table
“Previously reported”
Context: 26MCDD003
QA/QC DisclosedRejected · positive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Reason: The JORC table details internal QA/QC review by QMines technical personnel and the Competent Person.
Evidence · text
“Drilling, logging, sampling, assay and QAQC data were internally reviewed by QMines technical personnel and the Competent Person.”
Compositing TransparentRejected · positive
Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Reason: The table specifies a 0.20% Cu lower cut off and maximum 2m internal dilution for the reported intercepts.
Evidence · text
“0.20% Cu lower cut off, maximum 2m internal dilution.”
26MCRD005Mt Chalmers West · copperGrade: 1.03Grade Unit: %Intercept: 44 mHistorical resultNeeds review: historical_restatementView all detailsHide details
Identity
- Hole ID
- 26MCRD005
- Project
- Mt Chalmers West
- Commodity
- copper
- Region
- australia_qld
- Reported Region
- australia_qld
- Ticker
- QML
Geometry
- Grade
- 1.03
- Grade Unit
- %
- Intercept
- 44 m
- From
- 103 m
- To
- 147 m
- Hole Depth
- 156.1 m
- Intercept Depth
- 103 m
Classification
- Deposit Type
- vms
- Program
- exploration
- Sample Type
- drill
- Group ID
- 26MCRD005:103-147
- Mining Method
- unknown
Location
- Easting
- 260074
- Northing
- 7421304
- CRS
- UTM
- Elevation
- 125.6 m
- Azimuth
- 143 °
- Dip
- -75 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Brisbane
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
Deleterious
- Deleterious Flag
- No
Compositing
- Cutoff Grade
- 0.2
- Cutoff Unit
- % Cu
- Dilution Disclosed
- Yes
- Max Dilution
- 2 m
Review
- Needs Review
- Yes
- Review Reason
- historical_restatement
- Interp. Status
- scored
- Historical
- Yes
Dates
- Event date
- 2026-10-11T00:00:00.000Z
Reasoning: This previously reported copper intercept shows a moderate grade over a significant width, indicating good mineralization, but has low novelty.
Positive factors
- Moderate copper grade for VMS deposit type
- Significant intercept length (44m)
- QA/QC procedures disclosed
- Compositing parameters transparent
Negative factors
- Result is previously reported, low novelty
Evidence · table
“1.03”
Context: 44.0
Tags used in scoring
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "1 A N N O U N C E M E N T QMINES DISCOVERS COPPER SULPHIDES 180M BEYOND MT CHALMERS RESOURCE HIGHLIGHTS • New Copper Dis"
Rejected tags
Rejected tags — excluded from scoring because their label or evidence could not be verified.
Stale Data Re-releaseRejected · negative
Historical results re-announced with no new assays or reinterpretation — low genuine novelty.
Reason: The intercept is explicitly marked as 'Previously reported' in the table.
Evidence · table
“Previously reported”
Context: 26MCRD005
QA/QC DisclosedRejected · positive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Reason: The JORC table details internal QA/QC review by QMines technical personnel and the Competent Person.
Evidence · text
“Drilling, logging, sampling, assay and QAQC data were internally reviewed by QMines technical personnel and the Competent Person.”
Compositing TransparentRejected · positive
Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Reason: The table specifies a 0.20% Cu lower cut off and maximum 2m internal dilution for the reported intercepts.
Evidence · text
“0.20% Cu lower cut off, maximum 2m internal dilution.”
26MCRD005Mt Chalmers West · goldGrade: 0.15Grade Unit: g/tIntercept: 44 mHistorical resultNeeds review: historical_restatementView all detailsHide details
Identity
- Hole ID
- 26MCRD005
- Project
- Mt Chalmers West
- Commodity
- gold
- Region
- australia_qld
- Reported Region
- australia_qld
- Ticker
- QML
Geometry
- Grade
- 0.15
- Grade Unit
- g/t
- Intercept
- 44 m
- From
- 103 m
- To
- 147 m
- Hole Depth
- 156.1 m
- Intercept Depth
- 103 m
Classification
- Deposit Type
- vms
- Program
- exploration
- Sample Type
- drill
- Group ID
- 26MCRD005:103-147
- Mining Method
- unknown
Location
- Easting
- 260074
- Northing
- 7421304
- CRS
- UTM
- Elevation
- 125.6 m
- Azimuth
- 143 °
- Dip
- -75 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Brisbane
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
Deleterious
- Deleterious Flag
- No
Compositing
- Cutoff Grade
- 0.2
- Cutoff Unit
- % Cu
- Dilution Disclosed
- Yes
- Max Dilution
- 2 m
Review
- Needs Review
- Yes
- Review Reason
- historical_restatement
- Interp. Status
- scored
- Historical
- Yes
Dates
- Event date
- 2026-10-11T00:00:00.000Z
Reasoning: This previously reported gold intercept shows a very low grade over a significant width, contributing little new information.
Positive factors
- QA/QC procedures disclosed
- Compositing parameters transparent
Negative factors
- Very low gold grade
- Result is previously reported, low novelty
Evidence · table
“0.15”
Context: 44.0
Tags used in scoring
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "1 A N N O U N C E M E N T QMINES DISCOVERS COPPER SULPHIDES 180M BEYOND MT CHALMERS RESOURCE HIGHLIGHTS • New Copper Dis"
Rejected tags
Rejected tags — excluded from scoring because their label or evidence could not be verified.
Stale Data Re-releaseRejected · negative
Historical results re-announced with no new assays or reinterpretation — low genuine novelty.
Reason: The intercept is explicitly marked as 'Previously reported' in the table.
Evidence · table
“Previously reported”
Context: 26MCRD005
QA/QC DisclosedRejected · positive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Reason: The JORC table details internal QA/QC review by QMines technical personnel and the Competent Person.
Evidence · text
“Drilling, logging, sampling, assay and QAQC data were internally reviewed by QMines technical personnel and the Competent Person.”
Compositing TransparentRejected · positive
Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Reason: The table specifies a 0.20% Cu lower cut off and maximum 2m internal dilution for the reported intercepts.
Evidence · text
“0.20% Cu lower cut off, maximum 2m internal dilution.”
26MCRD005Mt Chalmers West · zincGrade: 0.02Grade Unit: %Intercept: 44 mHistorical resultNeeds review: historical_restatementView all detailsHide details
Identity
- Hole ID
- 26MCRD005
- Project
- Mt Chalmers West
- Commodity
- zinc
- Region
- australia_qld
- Reported Region
- australia_qld
- Ticker
- QML
Geometry
- Grade
- 0.02
- Grade Unit
- %
- Intercept
- 44 m
- From
- 103 m
- To
- 147 m
- Hole Depth
- 156.1 m
- Intercept Depth
- 103 m
Classification
- Deposit Type
- vms
- Program
- exploration
- Sample Type
- drill
- Group ID
- 26MCRD005:103-147
- Mining Method
- unknown
Location
- Easting
- 260074
- Northing
- 7421304
- CRS
- UTM
- Elevation
- 125.6 m
- Azimuth
- 143 °
- Dip
- -75 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Brisbane
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
Deleterious
- Deleterious Flag
- No
Compositing
- Cutoff Grade
- 0.2
- Cutoff Unit
- % Cu
- Dilution Disclosed
- Yes
- Max Dilution
- 2 m
Review
- Needs Review
- Yes
- Review Reason
- historical_restatement
- Interp. Status
- scored
- Historical
- Yes
Dates
- Event date
- 2026-10-11T00:00:00.000Z
Reasoning: This previously reported zinc intercept shows a very low grade over a significant width, contributing little new information.
Positive factors
- QA/QC procedures disclosed
- Compositing parameters transparent
Negative factors
- Very low zinc grade
- Result is previously reported, low novelty
Evidence · table
“0.02”
Context: 44.0
Tags used in scoring
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "1 A N N O U N C E M E N T QMINES DISCOVERS COPPER SULPHIDES 180M BEYOND MT CHALMERS RESOURCE HIGHLIGHTS • New Copper Dis"
Rejected tags
Rejected tags — excluded from scoring because their label or evidence could not be verified.
Stale Data Re-releaseRejected · negative
Historical results re-announced with no new assays or reinterpretation — low genuine novelty.
Reason: The intercept is explicitly marked as 'Previously reported' in the table.
Evidence · table
“Previously reported”
Context: 26MCRD005
QA/QC DisclosedRejected · positive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Reason: The JORC table details internal QA/QC review by QMines technical personnel and the Competent Person.
Evidence · text
“Drilling, logging, sampling, assay and QAQC data were internally reviewed by QMines technical personnel and the Competent Person.”
Compositing TransparentRejected · positive
Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Reason: The table specifies a 0.20% Cu lower cut off and maximum 2m internal dilution for the reported intercepts.
Evidence · text
“0.20% Cu lower cut off, maximum 2m internal dilution.”
26MCRD005Mt Chalmers West · silverGrade: 2.3Grade Unit: g/tIntercept: 44 mHistorical resultNeeds review: historical_restatementView all detailsHide details
Identity
- Hole ID
- 26MCRD005
- Project
- Mt Chalmers West
- Commodity
- silver
- Region
- australia_qld
- Reported Region
- australia_qld
- Ticker
- QML
Geometry
- Grade
- 2.3
- Grade Unit
- g/t
- Intercept
- 44 m
- From
- 103 m
- To
- 147 m
- Hole Depth
- 156.1 m
- Intercept Depth
- 103 m
Classification
- Deposit Type
- vms
- Program
- exploration
- Sample Type
- drill
- Group ID
- 26MCRD005:103-147
- Mining Method
- unknown
Location
- Easting
- 260074
- Northing
- 7421304
- CRS
- UTM
- Elevation
- 125.6 m
- Azimuth
- 143 °
- Dip
- -75 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Brisbane
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
Deleterious
- Deleterious Flag
- No
Compositing
- Cutoff Grade
- 0.2
- Cutoff Unit
- % Cu
- Dilution Disclosed
- Yes
- Max Dilution
- 2 m
Review
- Needs Review
- Yes
- Review Reason
- historical_restatement
- Interp. Status
- scored
- Historical
- Yes
Dates
- Event date
- 2026-10-11T00:00:00.000Z
Reasoning: This previously reported silver intercept shows a very low grade over a significant width, contributing little new information.
Positive factors
- QA/QC procedures disclosed
- Compositing parameters transparent
Negative factors
- Very low silver grade
- Result is previously reported, low novelty
Evidence · table
“2.3”
Context: 44.0
Tags used in scoring
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "1 A N N O U N C E M E N T QMINES DISCOVERS COPPER SULPHIDES 180M BEYOND MT CHALMERS RESOURCE HIGHLIGHTS • New Copper Dis"
Rejected tags
Rejected tags — excluded from scoring because their label or evidence could not be verified.
Stale Data Re-releaseRejected · negative
Historical results re-announced with no new assays or reinterpretation — low genuine novelty.
Reason: The intercept is explicitly marked as 'Previously reported' in the table.
Evidence · table
“Previously reported”
Context: 26MCRD005
QA/QC DisclosedRejected · positive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Reason: The JORC table details internal QA/QC review by QMines technical personnel and the Competent Person.
Evidence · text
“Drilling, logging, sampling, assay and QAQC data were internally reviewed by QMines technical personnel and the Competent Person.”
Compositing TransparentRejected · positive
Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Reason: The table specifies a 0.20% Cu lower cut off and maximum 2m internal dilution for the reported intercepts.
Evidence · text
“0.20% Cu lower cut off, maximum 2m internal dilution.”
26MCRD005Mt Chalmers West · copperGrade: 2.2Grade Unit: %Intercept: 10 mHistorical resultNeeds review: historical_restatementView all detailsHide details
Identity
- Hole ID
- 26MCRD005
- Project
- Mt Chalmers West
- Commodity
- copper
- Region
- australia_qld
- Reported Region
- australia_qld
- Ticker
- QML
Geometry
- Grade
- 2.2
- Grade Unit
- %
- Intercept
- 10 m
- From
- 103 m
- To
- 113 m
- Hole Depth
- 156.1 m
- Intercept Depth
- 103 m
Classification
- Deposit Type
- vms
- Program
- exploration
- Sample Type
- drill
- Group ID
- 26MCRD005:103-113
- Mining Method
- unknown
Location
- Easting
- 260074
- Northing
- 7421304
- CRS
- UTM
- Elevation
- 125.6 m
- Azimuth
- 143 °
- Dip
- -75 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Brisbane
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
Deleterious
- Deleterious Flag
- No
Compositing
- Cutoff Grade
- 0.2
- Cutoff Unit
- % Cu
- Dilution Disclosed
- Yes
- Max Dilution
- 2 m
Review
- Needs Review
- Yes
- Review Reason
- historical_restatement
- Interp. Status
- scored
- Historical
- Yes
Dates
- Event date
- 2026-10-11T00:00:00.000Z
Reasoning: This previously reported sub-interval shows a strong copper grade over a moderate width, indicating good mineralization, but has low novelty.
Positive factors
- Strong copper grade for VMS deposit type
- Moderate intercept length (10m)
- QA/QC procedures disclosed
- Compositing parameters transparent
Negative factors
- Result is previously reported, low novelty
Evidence · table
“2.20”
Context: 10.0
Tags used in scoring
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "1 A N N O U N C E M E N T QMINES DISCOVERS COPPER SULPHIDES 180M BEYOND MT CHALMERS RESOURCE HIGHLIGHTS • New Copper Dis"
Rejected tags
Rejected tags — excluded from scoring because their label or evidence could not be verified.
Stale Data Re-releaseRejected · negative
Historical results re-announced with no new assays or reinterpretation — low genuine novelty.
Reason: The intercept is explicitly marked as 'Previously reported' in the table.
Evidence · table
“Previously reported”
Context: 26MCRD005
QA/QC DisclosedRejected · positive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Reason: The JORC table details internal QA/QC review by QMines technical personnel and the Competent Person.
Evidence · text
“Drilling, logging, sampling, assay and QAQC data were internally reviewed by QMines technical personnel and the Competent Person.”
Compositing TransparentRejected · positive
Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Reason: The table specifies a 0.20% Cu lower cut off and maximum 2m internal dilution for the reported intercepts.
Evidence · text
“0.20% Cu lower cut off, maximum 2m internal dilution.”
26MCRD005Mt Chalmers West · goldGrade: 0.35Grade Unit: g/tIntercept: 10 mHistorical resultNeeds review: historical_restatementView all detailsHide details
Identity
- Hole ID
- 26MCRD005
- Project
- Mt Chalmers West
- Commodity
- gold
- Region
- australia_qld
- Reported Region
- australia_qld
- Ticker
- QML
Geometry
- Grade
- 0.35
- Grade Unit
- g/t
- Intercept
- 10 m
- From
- 103 m
- To
- 113 m
- Hole Depth
- 156.1 m
- Intercept Depth
- 103 m
Classification
- Deposit Type
- vms
- Program
- exploration
- Sample Type
- drill
- Group ID
- 26MCRD005:103-113
- Mining Method
- unknown
Location
- Easting
- 260074
- Northing
- 7421304
- CRS
- UTM
- Elevation
- 125.6 m
- Azimuth
- 143 °
- Dip
- -75 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Brisbane
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
Deleterious
- Deleterious Flag
- No
Compositing
- Cutoff Grade
- 0.2
- Cutoff Unit
- % Cu
- Dilution Disclosed
- Yes
- Max Dilution
- 2 m
Review
- Needs Review
- Yes
- Review Reason
- historical_restatement
- Interp. Status
- scored
- Historical
- Yes
Dates
- Event date
- 2026-10-11T00:00:00.000Z
Reasoning: This previously reported sub-interval shows a weak gold grade over a moderate width, but has low novelty.
Positive factors
- QA/QC procedures disclosed
- Compositing parameters transparent
Negative factors
- Result is previously reported, low novelty
Evidence · table
“0.35”
Context: 10.0
Tags used in scoring
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "1 A N N O U N C E M E N T QMINES DISCOVERS COPPER SULPHIDES 180M BEYOND MT CHALMERS RESOURCE HIGHLIGHTS • New Copper Dis"
Rejected tags
Rejected tags — excluded from scoring because their label or evidence could not be verified.
Stale Data Re-releaseRejected · negative
Historical results re-announced with no new assays or reinterpretation — low genuine novelty.
Reason: The intercept is explicitly marked as 'Previously reported' in the table.
Evidence · table
“Previously reported”
Context: 26MCRD005
QA/QC DisclosedRejected · positive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Reason: The JORC table details internal QA/QC review by QMines technical personnel and the Competent Person.
Evidence · text
“Drilling, logging, sampling, assay and QAQC data were internally reviewed by QMines technical personnel and the Competent Person.”
Compositing TransparentRejected · positive
Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Reason: The table specifies a 0.20% Cu lower cut off and maximum 2m internal dilution for the reported intercepts.
Evidence · text
“0.20% Cu lower cut off, maximum 2m internal dilution.”
26MCRD005Mt Chalmers West · zincGrade: 0.03Grade Unit: %Intercept: 10 mHistorical resultNeeds review: historical_restatementView all detailsHide details
Identity
- Hole ID
- 26MCRD005
- Project
- Mt Chalmers West
- Commodity
- zinc
- Region
- australia_qld
- Reported Region
- australia_qld
- Ticker
- QML
Geometry
- Grade
- 0.03
- Grade Unit
- %
- Intercept
- 10 m
- From
- 103 m
- To
- 113 m
- Hole Depth
- 156.1 m
- Intercept Depth
- 103 m
Classification
- Deposit Type
- vms
- Program
- exploration
- Sample Type
- drill
- Group ID
- 26MCRD005:103-113
- Mining Method
- unknown
Location
- Easting
- 260074
- Northing
- 7421304
- CRS
- UTM
- Elevation
- 125.6 m
- Azimuth
- 143 °
- Dip
- -75 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Brisbane
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
Deleterious
- Deleterious Flag
- No
Compositing
- Cutoff Grade
- 0.2
- Cutoff Unit
- % Cu
- Dilution Disclosed
- Yes
- Max Dilution
- 2 m
Review
- Needs Review
- Yes
- Review Reason
- historical_restatement
- Interp. Status
- scored
- Historical
- Yes
Dates
- Event date
- 2026-10-11T00:00:00.000Z
Reasoning: This previously reported sub-interval shows a very low zinc grade over a moderate width, contributing little new information.
Positive factors
- QA/QC procedures disclosed
- Compositing parameters transparent
Negative factors
- Very low zinc grade
- Result is previously reported, low novelty
Evidence · table
“0.03”
Context: 10.0
Tags used in scoring
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "1 A N N O U N C E M E N T QMINES DISCOVERS COPPER SULPHIDES 180M BEYOND MT CHALMERS RESOURCE HIGHLIGHTS • New Copper Dis"
Rejected tags
Rejected tags — excluded from scoring because their label or evidence could not be verified.
Stale Data Re-releaseRejected · negative
Historical results re-announced with no new assays or reinterpretation — low genuine novelty.
Reason: The intercept is explicitly marked as 'Previously reported' in the table.
Evidence · table
“Previously reported”
Context: 26MCRD005
QA/QC DisclosedRejected · positive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Reason: The JORC table details internal QA/QC review by QMines technical personnel and the Competent Person.
Evidence · text
“Drilling, logging, sampling, assay and QAQC data were internally reviewed by QMines technical personnel and the Competent Person.”
Compositing TransparentRejected · positive
Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Reason: The table specifies a 0.20% Cu lower cut off and maximum 2m internal dilution for the reported intercepts.
Evidence · text
“0.20% Cu lower cut off, maximum 2m internal dilution.”
26MCRD005Mt Chalmers West · silverGrade: 4.7Grade Unit: g/tIntercept: 10 mHistorical resultNeeds review: historical_restatementView all detailsHide details
Identity
- Hole ID
- 26MCRD005
- Project
- Mt Chalmers West
- Commodity
- silver
- Region
- australia_qld
- Reported Region
- australia_qld
- Ticker
- QML
Geometry
- Grade
- 4.7
- Grade Unit
- g/t
- Intercept
- 10 m
- From
- 103 m
- To
- 113 m
- Hole Depth
- 156.1 m
- Intercept Depth
- 103 m
Classification
- Deposit Type
- vms
- Program
- exploration
- Sample Type
- drill
- Group ID
- 26MCRD005:103-113
- Mining Method
- unknown
Location
- Easting
- 260074
- Northing
- 7421304
- CRS
- UTM
- Elevation
- 125.6 m
- Azimuth
- 143 °
- Dip
- -75 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Brisbane
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
Deleterious
- Deleterious Flag
- No
Compositing
- Cutoff Grade
- 0.2
- Cutoff Unit
- % Cu
- Dilution Disclosed
- Yes
- Max Dilution
- 2 m
Review
- Needs Review
- Yes
- Review Reason
- historical_restatement
- Interp. Status
- scored
- Historical
- Yes
Dates
- Event date
- 2026-10-11T00:00:00.000Z
Reasoning: This previously reported sub-interval shows a very low silver grade over a moderate width, contributing little new information.
Positive factors
- QA/QC procedures disclosed
- Compositing parameters transparent
Negative factors
- Very low silver grade
- Result is previously reported, low novelty
Evidence · table
“4.7”
Context: 10.0
Tags used in scoring
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "1 A N N O U N C E M E N T QMINES DISCOVERS COPPER SULPHIDES 180M BEYOND MT CHALMERS RESOURCE HIGHLIGHTS • New Copper Dis"
Rejected tags
Rejected tags — excluded from scoring because their label or evidence could not be verified.
Stale Data Re-releaseRejected · negative
Historical results re-announced with no new assays or reinterpretation — low genuine novelty.
Reason: The intercept is explicitly marked as 'Previously reported' in the table.
Evidence · table
“Previously reported”
Context: 26MCRD005
QA/QC DisclosedRejected · positive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Reason: The JORC table details internal QA/QC review by QMines technical personnel and the Competent Person.
Evidence · text
“Drilling, logging, sampling, assay and QAQC data were internally reviewed by QMines technical personnel and the Competent Person.”
Compositing TransparentRejected · positive
Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Reason: The table specifies a 0.20% Cu lower cut off and maximum 2m internal dilution for the reported intercepts.
Evidence · text
“0.20% Cu lower cut off, maximum 2m internal dilution.”
How Atlas produces this analysis
Minestarters Atlas uses automated extraction to summarize mining announcements, identify reported measurements, and classify supporting evidence. Sentiment reflects the extracted narrative and classification rules; it is an interpretation, not a reported measurement. Evidence quotes and context are provided where available. Missing data, low-confidence results, and review flags indicate limitations. Check the original publisher announcement before relying on an interpretation.