Positive Tempiute Tungsten Drilling Results
Original announcement by lse on
- Company
- Guardian Metal Resources plc
- Ticker
- GMET
- Exchange
- LSE
- Region
- Nevada
- Primary commodity
- Tungsten
- Secondary commodities
- Zinc, Silver, Copper
- Document categories
- Drill results
- Extracted
- 2026-09-21 14:19:04 UTC
Analysis by Minestarters Atlas
Atlas analysis published:
Minestarters Atlas analysis
Summary
Guardian Metal Resources plc announced positive drilling results from its Tempiute tungsten project in Nevada, USA, including broad and high-grade tungsten intersections. The results from both Phase I regional exploration and initial Phase II resource drilling confirm a more extensive mineralized system and have prompted the company to accelerate underground rehabilitation to facilitate further drilling and potential mine development. While true widths are not yet known, the company has disclosed QA/QC procedures and is advancing towards a potential initial Mineral Resource estimate.
Reasoning: The drilling results from both Phase I and initial Phase II at the Tempiute project show significant tungsten mineralization, including broad and high-grade intercepts, which has led to a strategic decision to rehabilitate historical underground workings to advance the project towards a Mineral Resource estimate and potential production.
Positive factors
- Broad and high-grade tungsten intercepts
- Confirmation of a larger mineralized system
- Accelerated underground rehabilitation decision
- Potential for initial Mineral Resource estimate
- QA/QC disclosed
- Certified laboratories used
- QP/CP signed
Negative factors
- True widths not yet known
- Some holes still awaiting assay results
Low confidence — this extraction should be reviewed alongside the original source.
Facts used in scoring: 192
Extracted facts
Stored fact records: 192. Some facts used in scoring do not have a stored record.
Drill Results (192)
TP26-042Tempiute · tungstenGrade: 0.21Grade Unit: %Intercept: 20.2 mView all detailsHide details
Identity
- Hole ID
- TP26-042
- Project
- Tempiute
- Commodity
- tungsten
- Region
- usa_nv
- Reported Region
- usa_nv
- Ticker
- GMET
Geometry
- Grade
- 0.21
- Grade Unit
- %
- Intercept
- 20.2 m
- From
- 210 m
- To
- 230.2 m
- Hole Depth
- 245.67 m
- Intercept Depth
- 210 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- TP26-042:210-230.2
Location
- Location
- South Thumb
- Easting
- 620965
- Northing
- 4165692
- CRS
- NAD83/ UTM Zone 11N Datum
- Azimuth
- 0 °
- Dip
- -45 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- MSA Labs and ALS Laboratories
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Compositing
- Cutoff Grade
- 0.04
- Cutoff Unit
- % WO3
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-21T00:00:00.000Z
Reasoning: This intercept shows strong tungsten mineralization over a good width, contributing to the resource drilling program.
Positive factors
- Strong tungsten grade
- Good intercept length
- QA/QC disclosed
Negative factors
- Apparent width only
Evidence · table
“0.21”
Context: 20.20
Rejected tags
Rejected tags — excluded from scoring because their label or evidence could not be verified.
QA/QC DisclosedRejected · positive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Reason: The release mentions MSA Labs and ALS Laboratories as certified labs and details QA/QC procedures including standards, duplicates, and blanks.
Evidence · text
“MSA Labs (MSA) of Elko, Nevada which is an ISO9001 and ISO/IEC 17025 accredited laboratory. ... ALS Laboratories of Reno, Nevada. ... Guardian Metal’s QA/QC program includes regular insertion of standards, duplicates and blanks into the sample stream”
Apparent Width OnlyRejected · negative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Reason: The document explicitly states that true thicknesses are not yet known for any reported intercepts.
Evidence · text
“Note: True thicknesses of all intercepts reported herein are not yet known.”
Cut-off DisclosedRejected · positive · Story-specific tag
Cut-off grade used for resource reporting is clearly stated, enabling like-for-like comparison.
Reason: The notes for the Phase II table explicitly state the cut-off grade used for reporting intercepts.
Evidence · text
“Only material intercepts of at least 5m apparent width at a cut-off grade of >/=0.04% WO 3 are included.”
Infill DrillingRejected · neutral
Confirmatory drilling to raise resource confidence, not new discovery.
Reason: This hole is part of the Phase II program, which is described as resource drilling designed to test continuity and support a Mineral Resource estimate.
Evidence · text
“The ongoing Phase II resource drilling program is planned to include approximately 46 diamond drillholes, of which 28 have been completed to date. The program is designed to test the continuity, thickness and grade of mineralization around and beyond the historical underground workings, and to generate the data needed to support the potential definition of an initial Mineral Resource estimate at Tempiute.”
TP26-042Tempiute · zincGrade: 0.22Grade Unit: %Intercept: 20.2 mView all detailsHide details
Identity
- Hole ID
- TP26-042
- Project
- Tempiute
- Commodity
- zinc
- Region
- usa_nv
- Reported Region
- usa_nv
- Ticker
- GMET
Geometry
- Grade
- 0.22
- Grade Unit
- %
- Intercept
- 20.2 m
- From
- 210 m
- To
- 230.2 m
- Hole Depth
- 245.67 m
- Intercept Depth
- 210 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- TP26-042:210-230.2
Location
- Location
- South Thumb
- Easting
- 620965
- Northing
- 4165692
- CRS
- NAD83/ UTM Zone 11N Datum
- Azimuth
- 0 °
- Dip
- -45 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- MSA Labs and ALS Laboratories
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Compositing
- Cutoff Grade
- 0.04
- Cutoff Unit
- % WO3
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-21T00:00:00.000Z
Reasoning: This intercept shows a moderate zinc grade over a good width, providing additional polymetallic context to the tungsten mineralization.
Positive factors
- QA/QC disclosed
Negative factors
- Apparent width only
Evidence · table
“0.22”
Context: 20.20
Rejected tags
Rejected tags — excluded from scoring because their label or evidence could not be verified.
QA/QC DisclosedRejected · positive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Reason: The release mentions MSA Labs and ALS Laboratories as certified labs and details QA/QC procedures including standards, duplicates, and blanks.
Evidence · text
“MSA Labs (MSA) of Elko, Nevada which is an ISO9001 and ISO/IEC 17025 accredited laboratory. ... ALS Laboratories of Reno, Nevada. ... Guardian Metal’s QA/QC program includes regular insertion of standards, duplicates and blanks into the sample stream”
Apparent Width OnlyRejected · negative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Reason: The document explicitly states that true thicknesses are not yet known for any reported intercepts.
Evidence · text
“Note: True thicknesses of all intercepts reported herein are not yet known.”
Cut-off DisclosedRejected · positive · Story-specific tag
Cut-off grade used for resource reporting is clearly stated, enabling like-for-like comparison.
Reason: The notes for the Phase II table explicitly state the cut-off grade used for reporting intercepts.
Evidence · text
“Only material intercepts of at least 5m apparent width at a cut-off grade of >/=0.04% WO 3 are included.”
Infill DrillingRejected · neutral
Confirmatory drilling to raise resource confidence, not new discovery.
Reason: This hole is part of the Phase II program, which is described as resource drilling designed to test continuity and support a Mineral Resource estimate.
Evidence · text
“The ongoing Phase II resource drilling program is planned to include approximately 46 diamond drillholes, of which 28 have been completed to date. The program is designed to test the continuity, thickness and grade of mineralization around and beyond the historical underground workings, and to generate the data needed to support the potential definition of an initial Mineral Resource estimate at Tempiute.”
TP26-042Tempiute · silverGrade: 2.03Grade Unit: ppmIntercept: 20.2 mView all detailsHide details
Identity
- Hole ID
- TP26-042
- Project
- Tempiute
- Commodity
- silver
- Region
- usa_nv
- Reported Region
- usa_nv
- Ticker
- GMET
Geometry
- Grade
- 2.03
- Grade Unit
- ppm
- Intercept
- 20.2 m
- From
- 210 m
- To
- 230.2 m
- Hole Depth
- 245.67 m
- Intercept Depth
- 210 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- TP26-042:210-230.2
Location
- Location
- South Thumb
- Easting
- 620965
- Northing
- 4165692
- CRS
- NAD83/ UTM Zone 11N Datum
- Azimuth
- 0 °
- Dip
- -45 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- MSA Labs and ALS Laboratories
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Compositing
- Cutoff Grade
- 0.04
- Cutoff Unit
- % WO3
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-21T00:00:00.000Z
Reasoning: This intercept shows trace silver mineralization, providing additional polymetallic context.
Positive factors
- QA/QC disclosed
Negative factors
- Apparent width only
Evidence · table
“2.03”
Context: 20.20
Rejected tags
Rejected tags — excluded from scoring because their label or evidence could not be verified.
QA/QC DisclosedRejected · positive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Reason: The release mentions MSA Labs and ALS Laboratories as certified labs and details QA/QC procedures including standards, duplicates, and blanks.
Evidence · text
“MSA Labs (MSA) of Elko, Nevada which is an ISO9001 and ISO/IEC 17025 accredited laboratory. ... ALS Laboratories of Reno, Nevada. ... Guardian Metal’s QA/QC program includes regular insertion of standards, duplicates and blanks into the sample stream”
Apparent Width OnlyRejected · negative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Reason: The document explicitly states that true thicknesses are not yet known for any reported intercepts.
Evidence · text
“Note: True thicknesses of all intercepts reported herein are not yet known.”
Cut-off DisclosedRejected · positive · Story-specific tag
Cut-off grade used for resource reporting is clearly stated, enabling like-for-like comparison.
Reason: The notes for the Phase II table explicitly state the cut-off grade used for reporting intercepts.
Evidence · text
“Only material intercepts of at least 5m apparent width at a cut-off grade of >/=0.04% WO 3 are included.”
Infill DrillingRejected · neutral
Confirmatory drilling to raise resource confidence, not new discovery.
Reason: This hole is part of the Phase II program, which is described as resource drilling designed to test continuity and support a Mineral Resource estimate.
Evidence · text
“The ongoing Phase II resource drilling program is planned to include approximately 46 diamond drillholes, of which 28 have been completed to date. The program is designed to test the continuity, thickness and grade of mineralization around and beyond the historical underground workings, and to generate the data needed to support the potential definition of an initial Mineral Resource estimate at Tempiute.”
TP26-042Tempiute · copperGrade: 0.01Grade Unit: %Intercept: 20.2 mView all detailsHide details
Identity
- Hole ID
- TP26-042
- Project
- Tempiute
- Commodity
- copper
- Region
- usa_nv
- Reported Region
- usa_nv
- Ticker
- GMET
Geometry
- Grade
- 0.01
- Grade Unit
- %
- Intercept
- 20.2 m
- From
- 210 m
- To
- 230.2 m
- Hole Depth
- 245.67 m
- Intercept Depth
- 210 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- TP26-042:210-230.2
Location
- Location
- South Thumb
- Easting
- 620965
- Northing
- 4165692
- CRS
- NAD83/ UTM Zone 11N Datum
- Azimuth
- 0 °
- Dip
- -45 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- MSA Labs and ALS Laboratories
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Compositing
- Cutoff Grade
- 0.04
- Cutoff Unit
- % WO3
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-21T00:00:00.000Z
Reasoning: This intercept shows trace copper mineralization, providing additional polymetallic context.
Positive factors
- QA/QC disclosed
Negative factors
- Apparent width only
Evidence · table
“0.010”
Context: 20.20
Rejected tags
Rejected tags — excluded from scoring because their label or evidence could not be verified.
QA/QC DisclosedRejected · positive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Reason: The release mentions MSA Labs and ALS Laboratories as certified labs and details QA/QC procedures including standards, duplicates, and blanks.
Evidence · text
“MSA Labs (MSA) of Elko, Nevada which is an ISO9001 and ISO/IEC 17025 accredited laboratory. ... ALS Laboratories of Reno, Nevada. ... Guardian Metal’s QA/QC program includes regular insertion of standards, duplicates and blanks into the sample stream”
Apparent Width OnlyRejected · negative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Reason: The document explicitly states that true thicknesses are not yet known for any reported intercepts.
Evidence · text
“Note: True thicknesses of all intercepts reported herein are not yet known.”
Cut-off DisclosedRejected · positive · Story-specific tag
Cut-off grade used for resource reporting is clearly stated, enabling like-for-like comparison.
Reason: The notes for the Phase II table explicitly state the cut-off grade used for reporting intercepts.
Evidence · text
“Only material intercepts of at least 5m apparent width at a cut-off grade of >/=0.04% WO 3 are included.”
Infill DrillingRejected · neutral
Confirmatory drilling to raise resource confidence, not new discovery.
Reason: This hole is part of the Phase II program, which is described as resource drilling designed to test continuity and support a Mineral Resource estimate.
Evidence · text
“The ongoing Phase II resource drilling program is planned to include approximately 46 diamond drillholes, of which 28 have been completed to date. The program is designed to test the continuity, thickness and grade of mineralization around and beyond the historical underground workings, and to generate the data needed to support the potential definition of an initial Mineral Resource estimate at Tempiute.”
TP26-042Tempiute · tungstenGrade: 0.35Grade Unit: %Intercept: 6.94 mView all detailsHide details
Identity
- Hole ID
- TP26-042
- Project
- Tempiute
- Commodity
- tungsten
- Region
- usa_nv
- Reported Region
- usa_nv
- Ticker
- GMET
Geometry
- Grade
- 0.35
- Grade Unit
- %
- Intercept
- 6.94 m
- From
- 211.91 m
- To
- 218.85 m
- Hole Depth
- 245.67 m
- Intercept Depth
- 210 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- TP26-042:211.91-218.85
Location
- Location
- South Thumb
- Easting
- 620965
- Northing
- 4165692
- CRS
- NAD83/ UTM Zone 11N Datum
- Azimuth
- 0 °
- Dip
- -45 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- MSA Labs and ALS Laboratories
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Compositing
- Cutoff Grade
- 0.04
- Cutoff Unit
- % WO3
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-21T00:00:00.000Z
Reasoning: This sub-interval shows higher-grade tungsten mineralization within the broader intercept, indicating a concentrated zone.
Positive factors
- Strong tungsten grade
- QA/QC disclosed
Negative factors
- Apparent width only
Evidence · table
“0.35”
Context: 6.94
Rejected tags
Rejected tags — excluded from scoring because their label or evidence could not be verified.
QA/QC DisclosedRejected · positive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Reason: The release mentions MSA Labs and ALS Laboratories as certified labs and details QA/QC procedures including standards, duplicates, and blanks.
Evidence · text
“MSA Labs (MSA) of Elko, Nevada which is an ISO9001 and ISO/IEC 17025 accredited laboratory. ... ALS Laboratories of Reno, Nevada. ... Guardian Metal’s QA/QC program includes regular insertion of standards, duplicates and blanks into the sample stream”
Apparent Width OnlyRejected · negative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Reason: The document explicitly states that true thicknesses are not yet known for any reported intercepts.
Evidence · text
“Note: True thicknesses of all intercepts reported herein are not yet known.”
Cut-off DisclosedRejected · positive · Story-specific tag
Cut-off grade used for resource reporting is clearly stated, enabling like-for-like comparison.
Reason: The notes for the Phase II table explicitly state the cut-off grade used for reporting intercepts.
Evidence · text
“Only material intercepts of at least 5m apparent width at a cut-off grade of >/=0.04% WO 3 are included.”
Infill DrillingRejected · neutral
Confirmatory drilling to raise resource confidence, not new discovery.
Reason: This hole is part of the Phase II program, which is described as resource drilling designed to test continuity and support a Mineral Resource estimate.
Evidence · text
“The ongoing Phase II resource drilling program is planned to include approximately 46 diamond drillholes, of which 28 have been completed to date. The program is designed to test the continuity, thickness and grade of mineralization around and beyond the historical underground workings, and to generate the data needed to support the potential definition of an initial Mineral Resource estimate at Tempiute.”
TP26-042Tempiute · zincGrade: 0.55Grade Unit: %Intercept: 6.94 mView all detailsHide details
Identity
- Hole ID
- TP26-042
- Project
- Tempiute
- Commodity
- zinc
- Region
- usa_nv
- Reported Region
- usa_nv
- Ticker
- GMET
Geometry
- Grade
- 0.55
- Grade Unit
- %
- Intercept
- 6.94 m
- From
- 211.91 m
- To
- 218.85 m
- Hole Depth
- 245.67 m
- Intercept Depth
- 210 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- TP26-042:211.91-218.85
Location
- Location
- South Thumb
- Easting
- 620965
- Northing
- 4165692
- CRS
- NAD83/ UTM Zone 11N Datum
- Azimuth
- 0 °
- Dip
- -45 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- MSA Labs and ALS Laboratories
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Compositing
- Cutoff Grade
- 0.04
- Cutoff Unit
- % WO3
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-21T00:00:00.000Z
Reasoning: This sub-interval shows a higher zinc grade, adding to the polymetallic potential.
Positive factors
- QA/QC disclosed
Negative factors
- Apparent width only
Evidence · table
“0.55”
Context: 6.94
Rejected tags
Rejected tags — excluded from scoring because their label or evidence could not be verified.
QA/QC DisclosedRejected · positive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Reason: The release mentions MSA Labs and ALS Laboratories as certified labs and details QA/QC procedures including standards, duplicates, and blanks.
Evidence · text
“MSA Labs (MSA) of Elko, Nevada which is an ISO9001 and ISO/IEC 17025 accredited laboratory. ... ALS Laboratories of Reno, Nevada. ... Guardian Metal’s QA/QC program includes regular insertion of standards, duplicates and blanks into the sample stream”
Apparent Width OnlyRejected · negative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Reason: The document explicitly states that true thicknesses are not yet known for any reported intercepts.
Evidence · text
“Note: True thicknesses of all intercepts reported herein are not yet known.”
Cut-off DisclosedRejected · positive · Story-specific tag
Cut-off grade used for resource reporting is clearly stated, enabling like-for-like comparison.
Reason: The notes for the Phase II table explicitly state the cut-off grade used for reporting intercepts.
Evidence · text
“Only material intercepts of at least 5m apparent width at a cut-off grade of >/=0.04% WO 3 are included.”
Infill DrillingRejected · neutral
Confirmatory drilling to raise resource confidence, not new discovery.
Reason: This hole is part of the Phase II program, which is described as resource drilling designed to test continuity and support a Mineral Resource estimate.
Evidence · text
“The ongoing Phase II resource drilling program is planned to include approximately 46 diamond drillholes, of which 28 have been completed to date. The program is designed to test the continuity, thickness and grade of mineralization around and beyond the historical underground workings, and to generate the data needed to support the potential definition of an initial Mineral Resource estimate at Tempiute.”
TP26-042Tempiute · silverGrade: 3.98Grade Unit: ppmIntercept: 6.94 mView all detailsHide details
Identity
- Hole ID
- TP26-042
- Project
- Tempiute
- Commodity
- silver
- Region
- usa_nv
- Reported Region
- usa_nv
- Ticker
- GMET
Geometry
- Grade
- 3.98
- Grade Unit
- ppm
- Intercept
- 6.94 m
- From
- 211.91 m
- To
- 218.85 m
- Hole Depth
- 245.67 m
- Intercept Depth
- 210 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- TP26-042:211.91-218.85
Location
- Location
- South Thumb
- Easting
- 620965
- Northing
- 4165692
- CRS
- NAD83/ UTM Zone 11N Datum
- Azimuth
- 0 °
- Dip
- -45 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- MSA Labs and ALS Laboratories
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Compositing
- Cutoff Grade
- 0.04
- Cutoff Unit
- % WO3
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-21T00:00:00.000Z
Reasoning: This sub-interval shows trace silver mineralization, providing additional polymetallic context.
Positive factors
- QA/QC disclosed
Negative factors
- Apparent width only
Evidence · table
“3.98”
Context: 6.94
Tags used in scoring
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
Rejected tags
Rejected tags — excluded from scoring because their label or evidence could not be verified.
QA/QC DisclosedRejected · positive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Reason: The release mentions MSA Labs and ALS Laboratories as certified labs and details QA/QC procedures including standards, duplicates, and blanks.
Evidence · text
“MSA Labs (MSA) of Elko, Nevada which is an ISO9001 and ISO/IEC 17025 accredited laboratory. ... ALS Laboratories of Reno, Nevada. ... Guardian Metal’s QA/QC program includes regular insertion of standards, duplicates and blanks into the sample stream”
Apparent Width OnlyRejected · negative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Reason: The document explicitly states that true thicknesses are not yet known for any reported intercepts.
Evidence · text
“Note: True thicknesses of all intercepts reported herein are not yet known.”
Cut-off DisclosedRejected · positive · Story-specific tag
Cut-off grade used for resource reporting is clearly stated, enabling like-for-like comparison.
Reason: The notes for the Phase II table explicitly state the cut-off grade used for reporting intercepts.
Evidence · text
“Only material intercepts of at least 5m apparent width at a cut-off grade of >/=0.04% WO 3 are included.”
TP26-042Tempiute · copperGrade: 0.007Grade Unit: %Intercept: 6.94 mView all detailsHide details
Identity
- Hole ID
- TP26-042
- Project
- Tempiute
- Commodity
- copper
- Region
- usa_nv
- Reported Region
- usa_nv
- Ticker
- GMET
Geometry
- Grade
- 0.007
- Grade Unit
- %
- Intercept
- 6.94 m
- From
- 211.91 m
- To
- 218.85 m
- Hole Depth
- 245.67 m
- Intercept Depth
- 210 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- TP26-042:211.91-218.85
Location
- Location
- South Thumb
- Easting
- 620965
- Northing
- 4165692
- CRS
- NAD83/ UTM Zone 11N Datum
- Azimuth
- 0 °
- Dip
- -45 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- MSA Labs and ALS Laboratories
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Compositing
- Cutoff Grade
- 0.04
- Cutoff Unit
- % WO3
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-21T00:00:00.000Z
Reasoning: This sub-interval shows trace copper mineralization, providing additional polymetallic context.
Positive factors
- QA/QC disclosed
Negative factors
- Apparent width only
Evidence · table
“0.007”
Context: 6.94
Tags used in scoring
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
Rejected tags
Rejected tags — excluded from scoring because their label or evidence could not be verified.
QA/QC DisclosedRejected · positive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Reason: The release mentions MSA Labs and ALS Laboratories as certified labs and details QA/QC procedures including standards, duplicates, and blanks.
Evidence · text
“MSA Labs (MSA) of Elko, Nevada which is an ISO9001 and ISO/IEC 17025 accredited laboratory. ... ALS Laboratories of Reno, Nevada. ... Guardian Metal’s QA/QC program includes regular insertion of standards, duplicates and blanks into the sample stream”
Apparent Width OnlyRejected · negative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Reason: The document explicitly states that true thicknesses are not yet known for any reported intercepts.
Evidence · text
“Note: True thicknesses of all intercepts reported herein are not yet known.”
Cut-off DisclosedRejected · positive · Story-specific tag
Cut-off grade used for resource reporting is clearly stated, enabling like-for-like comparison.
Reason: The notes for the Phase II table explicitly state the cut-off grade used for reporting intercepts.
Evidence · text
“Only material intercepts of at least 5m apparent width at a cut-off grade of >/=0.04% WO 3 are included.”
TP26-044Tempiute · tungstenGrade: 0.22Grade Unit: %Intercept: 23.86 mView all detailsHide details
Identity
- Hole ID
- TP26-044
- Project
- Tempiute
- Commodity
- tungsten
- Region
- usa_nv
- Reported Region
- usa_nv
- Ticker
- GMET
Geometry
- Grade
- 0.22
- Grade Unit
- %
- Intercept
- 23.86 m
- From
- 175.14 m
- To
- 199 m
- Hole Depth
- 213.06 m
- Intercept Depth
- 175.14 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- TP26-044:175.14-199
Location
- Location
- South Thumb
- Easting
- 620968
- Northing
- 4165692
- CRS
- NAD83/ UTM Zone 11N Datum
- Azimuth
- 35 °
- Dip
- -47 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- MSA Labs and ALS Laboratories
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Compositing
- Cutoff Grade
- 0.04
- Cutoff Unit
- % WO3
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-21T00:00:00.000Z
Reasoning: This intercept shows strong tungsten mineralization over a good width, contributing to the resource drilling program, though an unsampled section was included.
Positive factors
- Strong tungsten grade
- Good intercept length
- QA/QC disclosed
Negative factors
- Apparent width only
- Unsampled section included in interval
Evidence · table
“0.22”
Context: 23.86
Rejected tags
Rejected tags — excluded from scoring because their label or evidence could not be verified.
QA/QC DisclosedRejected · positive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Reason: The release mentions MSA Labs and ALS Laboratories as certified labs and details QA/QC procedures including standards, duplicates, and blanks.
Evidence · text
“MSA Labs (MSA) of Elko, Nevada which is an ISO9001 and ISO/IEC 17025 accredited laboratory. ... ALS Laboratories of Reno, Nevada. ... Guardian Metal’s QA/QC program includes regular insertion of standards, duplicates and blanks into the sample stream”
Apparent Width OnlyRejected · negative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Reason: The document explicitly states that true thicknesses are not yet known for any reported intercepts.
Evidence · text
“Note: True thicknesses of all intercepts reported herein are not yet known.”
Cut-off DisclosedRejected · positive · Story-specific tag
Cut-off grade used for resource reporting is clearly stated, enabling like-for-like comparison.
Reason: The notes for the Phase II table explicitly state the cut-off grade used for reporting intercepts.
Evidence · text
“Only material intercepts of at least 5m apparent width at a cut-off grade of >/=0.04% WO 3 are included.”
Infill DrillingRejected · neutral
Confirmatory drilling to raise resource confidence, not new discovery.
Reason: This hole is part of the Phase II program, which is described as resource drilling designed to test continuity and support a Mineral Resource estimate.
Evidence · text
“The ongoing Phase II resource drilling program is planned to include approximately 46 diamond drillholes, of which 28 have been completed to date. The program is designed to test the continuity, thickness and grade of mineralization around and beyond the historical underground workings, and to generate the data needed to support the potential definition of an initial Mineral Resource estimate at Tempiute.”
TP26-044Tempiute · zincGrade: 0.09Grade Unit: %Intercept: 23.86 mView all detailsHide details
Identity
- Hole ID
- TP26-044
- Project
- Tempiute
- Commodity
- zinc
- Region
- usa_nv
- Reported Region
- usa_nv
- Ticker
- GMET
Geometry
- Grade
- 0.09
- Grade Unit
- %
- Intercept
- 23.86 m
- From
- 175.14 m
- To
- 199 m
- Hole Depth
- 213.06 m
- Intercept Depth
- 175.14 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- TP26-044:175.14-199
Location
- Location
- South Thumb
- Easting
- 620968
- Northing
- 4165692
- CRS
- NAD83/ UTM Zone 11N Datum
- Azimuth
- 35 °
- Dip
- -47 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- MSA Labs and ALS Laboratories
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Compositing
- Cutoff Grade
- 0.04
- Cutoff Unit
- % WO3
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-21T00:00:00.000Z
Reasoning: This intercept shows trace zinc mineralization, providing additional polymetallic context.
Positive factors
- QA/QC disclosed
Negative factors
- Apparent width only
- Unsampled section included in interval
Evidence · table
“0.09”
Context: 23.86
Tags used in scoring
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
Rejected tags
Rejected tags — excluded from scoring because their label or evidence could not be verified.
QA/QC DisclosedRejected · positive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Reason: The release mentions MSA Labs and ALS Laboratories as certified labs and details QA/QC procedures including standards, duplicates, and blanks.
Evidence · text
“MSA Labs (MSA) of Elko, Nevada which is an ISO9001 and ISO/IEC 17025 accredited laboratory. ... ALS Laboratories of Reno, Nevada. ... Guardian Metal’s QA/QC program includes regular insertion of standards, duplicates and blanks into the sample stream”
Apparent Width OnlyRejected · negative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Reason: The document explicitly states that true thicknesses are not yet known for any reported intercepts.
Evidence · text
“Note: True thicknesses of all intercepts reported herein are not yet known.”
Cut-off DisclosedRejected · positive · Story-specific tag
Cut-off grade used for resource reporting is clearly stated, enabling like-for-like comparison.
Reason: The notes for the Phase II table explicitly state the cut-off grade used for reporting intercepts.
Evidence · text
“Only material intercepts of at least 5m apparent width at a cut-off grade of >/=0.04% WO 3 are included.”
TP26-044Tempiute · silverGrade: 0.82Grade Unit: ppmIntercept: 23.86 mView all detailsHide details
Identity
- Hole ID
- TP26-044
- Project
- Tempiute
- Commodity
- silver
- Region
- usa_nv
- Reported Region
- usa_nv
- Ticker
- GMET
Geometry
- Grade
- 0.82
- Grade Unit
- ppm
- Intercept
- 23.86 m
- From
- 175.14 m
- To
- 199 m
- Hole Depth
- 213.06 m
- Intercept Depth
- 175.14 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- TP26-044:175.14-199
Location
- Location
- South Thumb
- Easting
- 620968
- Northing
- 4165692
- CRS
- NAD83/ UTM Zone 11N Datum
- Azimuth
- 35 °
- Dip
- -47 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- MSA Labs and ALS Laboratories
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Compositing
- Cutoff Grade
- 0.04
- Cutoff Unit
- % WO3
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-21T00:00:00.000Z
Reasoning: This intercept shows trace silver mineralization, providing additional polymetallic context.
Positive factors
- QA/QC disclosed
Negative factors
- Apparent width only
- Unsampled section included in interval
Evidence · table
“0.82”
Context: 23.86
Tags used in scoring
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
Rejected tags
Rejected tags — excluded from scoring because their label or evidence could not be verified.
QA/QC DisclosedRejected · positive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Reason: The release mentions MSA Labs and ALS Laboratories as certified labs and details QA/QC procedures including standards, duplicates, and blanks.
Evidence · text
“MSA Labs (MSA) of Elko, Nevada which is an ISO9001 and ISO/IEC 17025 accredited laboratory. ... ALS Laboratories of Reno, Nevada. ... Guardian Metal’s QA/QC program includes regular insertion of standards, duplicates and blanks into the sample stream”
Apparent Width OnlyRejected · negative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Reason: The document explicitly states that true thicknesses are not yet known for any reported intercepts.
Evidence · text
“Note: True thicknesses of all intercepts reported herein are not yet known.”
Cut-off DisclosedRejected · positive · Story-specific tag
Cut-off grade used for resource reporting is clearly stated, enabling like-for-like comparison.
Reason: The notes for the Phase II table explicitly state the cut-off grade used for reporting intercepts.
Evidence · text
“Only material intercepts of at least 5m apparent width at a cut-off grade of >/=0.04% WO 3 are included.”
TP26-044Tempiute · copperGrade: 0.005Grade Unit: %Intercept: 23.86 mView all detailsHide details
Identity
- Hole ID
- TP26-044
- Project
- Tempiute
- Commodity
- copper
- Region
- usa_nv
- Reported Region
- usa_nv
- Ticker
- GMET
Geometry
- Grade
- 0.005
- Grade Unit
- %
- Intercept
- 23.86 m
- From
- 175.14 m
- To
- 199 m
- Hole Depth
- 213.06 m
- Intercept Depth
- 175.14 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- TP26-044:175.14-199
Location
- Location
- South Thumb
- Easting
- 620968
- Northing
- 4165692
- CRS
- NAD83/ UTM Zone 11N Datum
- Azimuth
- 35 °
- Dip
- -47 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- MSA Labs and ALS Laboratories
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Compositing
- Cutoff Grade
- 0.04
- Cutoff Unit
- % WO3
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-21T00:00:00.000Z
Reasoning: This intercept shows trace copper mineralization, providing additional polymetallic context.
Positive factors
- QA/QC disclosed
Negative factors
- Apparent width only
- Unsampled section included in interval
Evidence · table
“0.005”
Context: 23.86
Tags used in scoring
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
Rejected tags
Rejected tags — excluded from scoring because their label or evidence could not be verified.
QA/QC DisclosedRejected · positive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Reason: The release mentions MSA Labs and ALS Laboratories as certified labs and details QA/QC procedures including standards, duplicates, and blanks.
Evidence · text
“MSA Labs (MSA) of Elko, Nevada which is an ISO9001 and ISO/IEC 17025 accredited laboratory. ... ALS Laboratories of Reno, Nevada. ... Guardian Metal’s QA/QC program includes regular insertion of standards, duplicates and blanks into the sample stream”
Apparent Width OnlyRejected · negative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Reason: The document explicitly states that true thicknesses are not yet known for any reported intercepts.
Evidence · text
“Note: True thicknesses of all intercepts reported herein are not yet known.”
Cut-off DisclosedRejected · positive · Story-specific tag
Cut-off grade used for resource reporting is clearly stated, enabling like-for-like comparison.
Reason: The notes for the Phase II table explicitly state the cut-off grade used for reporting intercepts.
Evidence · text
“Only material intercepts of at least 5m apparent width at a cut-off grade of >/=0.04% WO 3 are included.”
TP26-044Tempiute · tungstenGrade: 0.29Grade Unit: %Intercept: 13.18 mView all detailsHide details
Identity
- Hole ID
- TP26-044
- Project
- Tempiute
- Commodity
- tungsten
- Region
- usa_nv
- Reported Region
- usa_nv
- Ticker
- GMET
Geometry
- Grade
- 0.29
- Grade Unit
- %
- Intercept
- 13.18 m
- From
- 175.14 m
- To
- 189.89 m
- Hole Depth
- 213.06 m
- Intercept Depth
- 175.14 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- TP26-044:175.14-189.89
Location
- Location
- South Thumb
- Easting
- 620968
- Northing
- 4165692
- CRS
- NAD83/ UTM Zone 11N Datum
- Azimuth
- 35 °
- Dip
- -47 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- MSA Labs and ALS Laboratories
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Compositing
- Cutoff Grade
- 0.04
- Cutoff Unit
- % WO3
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-21T00:00:00.000Z
Reasoning: This sub-interval shows higher-grade tungsten mineralization within the broader intercept, indicating a concentrated zone.
Positive factors
- Strong tungsten grade
- QA/QC disclosed
Negative factors
- Apparent width only
Evidence · table
“0.29”
Context: 13.18
Rejected tags
Rejected tags — excluded from scoring because their label or evidence could not be verified.
QA/QC DisclosedRejected · positive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Reason: The release mentions MSA Labs and ALS Laboratories as certified labs and details QA/QC procedures including standards, duplicates, and blanks.
Evidence · text
“MSA Labs (MSA) of Elko, Nevada which is an ISO9001 and ISO/IEC 17025 accredited laboratory. ... ALS Laboratories of Reno, Nevada. ... Guardian Metal’s QA/QC program includes regular insertion of standards, duplicates and blanks into the sample stream”
Apparent Width OnlyRejected · negative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Reason: The document explicitly states that true thicknesses are not yet known for any reported intercepts.
Evidence · text
“Note: True thicknesses of all intercepts reported herein are not yet known.”
Cut-off DisclosedRejected · positive · Story-specific tag
Cut-off grade used for resource reporting is clearly stated, enabling like-for-like comparison.
Reason: The notes for the Phase II table explicitly state the cut-off grade used for reporting intercepts.
Evidence · text
“Only material intercepts of at least 5m apparent width at a cut-off grade of >/=0.04% WO 3 are included.”
Infill DrillingRejected · neutral
Confirmatory drilling to raise resource confidence, not new discovery.
Reason: This hole is part of the Phase II program, which is described as resource drilling designed to test continuity and support a Mineral Resource estimate.
Evidence · text
“The ongoing Phase II resource drilling program is planned to include approximately 46 diamond drillholes, of which 28 have been completed to date. The program is designed to test the continuity, thickness and grade of mineralization around and beyond the historical underground workings, and to generate the data needed to support the potential definition of an initial Mineral Resource estimate at Tempiute.”
TP26-044Tempiute · zincGrade: 0.14Grade Unit: %Intercept: 13.18 mView all detailsHide details
Identity
- Hole ID
- TP26-044
- Project
- Tempiute
- Commodity
- zinc
- Region
- usa_nv
- Reported Region
- usa_nv
- Ticker
- GMET
Geometry
- Grade
- 0.14
- Grade Unit
- %
- Intercept
- 13.18 m
- From
- 175.14 m
- To
- 189.89 m
- Hole Depth
- 213.06 m
- Intercept Depth
- 175.14 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- TP26-044:175.14-189.89
Location
- Location
- South Thumb
- Easting
- 620968
- Northing
- 4165692
- CRS
- NAD83/ UTM Zone 11N Datum
- Azimuth
- 35 °
- Dip
- -47 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- MSA Labs and ALS Laboratories
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Compositing
- Cutoff Grade
- 0.04
- Cutoff Unit
- % WO3
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-21T00:00:00.000Z
Reasoning: This sub-interval shows a moderate zinc grade, adding to the polymetallic potential.
Positive factors
- QA/QC disclosed
Negative factors
- Apparent width only
Evidence · table
“0.14”
Context: 13.18
Tags used in scoring
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
Rejected tags
Rejected tags — excluded from scoring because their label or evidence could not be verified.
QA/QC DisclosedRejected · positive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Reason: The release mentions MSA Labs and ALS Laboratories as certified labs and details QA/QC procedures including standards, duplicates, and blanks.
Evidence · text
“MSA Labs (MSA) of Elko, Nevada which is an ISO9001 and ISO/IEC 17025 accredited laboratory. ... ALS Laboratories of Reno, Nevada. ... Guardian Metal’s QA/QC program includes regular insertion of standards, duplicates and blanks into the sample stream”
Apparent Width OnlyRejected · negative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Reason: The document explicitly states that true thicknesses are not yet known for any reported intercepts.
Evidence · text
“Note: True thicknesses of all intercepts reported herein are not yet known.”
Cut-off DisclosedRejected · positive · Story-specific tag
Cut-off grade used for resource reporting is clearly stated, enabling like-for-like comparison.
Reason: The notes for the Phase II table explicitly state the cut-off grade used for reporting intercepts.
Evidence · text
“Only material intercepts of at least 5m apparent width at a cut-off grade of >/=0.04% WO 3 are included.”
TP26-044Tempiute · silverGrade: 1.25Grade Unit: ppmIntercept: 13.18 mView all detailsHide details
Identity
- Hole ID
- TP26-044
- Project
- Tempiute
- Commodity
- silver
- Region
- usa_nv
- Reported Region
- usa_nv
- Ticker
- GMET
Geometry
- Grade
- 1.25
- Grade Unit
- ppm
- Intercept
- 13.18 m
- From
- 175.14 m
- To
- 189.89 m
- Hole Depth
- 213.06 m
- Intercept Depth
- 175.14 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- TP26-044:175.14-189.89
Location
- Location
- South Thumb
- Easting
- 620968
- Northing
- 4165692
- CRS
- NAD83/ UTM Zone 11N Datum
- Azimuth
- 35 °
- Dip
- -47 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- MSA Labs and ALS Laboratories
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Compositing
- Cutoff Grade
- 0.04
- Cutoff Unit
- % WO3
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-21T00:00:00.000Z
Reasoning: This sub-interval shows trace silver mineralization, providing additional polymetallic context.
Positive factors
- QA/QC disclosed
Negative factors
- Apparent width only
Evidence · table
“1.25”
Context: 13.18
Tags used in scoring
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
Rejected tags
Rejected tags — excluded from scoring because their label or evidence could not be verified.
QA/QC DisclosedRejected · positive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Reason: The release mentions MSA Labs and ALS Laboratories as certified labs and details QA/QC procedures including standards, duplicates, and blanks.
Evidence · text
“MSA Labs (MSA) of Elko, Nevada which is an ISO9001 and ISO/IEC 17025 accredited laboratory. ... ALS Laboratories of Reno, Nevada. ... Guardian Metal’s QA/QC program includes regular insertion of standards, duplicates and blanks into the sample stream”
Apparent Width OnlyRejected · negative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Reason: The document explicitly states that true thicknesses are not yet known for any reported intercepts.
Evidence · text
“Note: True thicknesses of all intercepts reported herein are not yet known.”
Cut-off DisclosedRejected · positive · Story-specific tag
Cut-off grade used for resource reporting is clearly stated, enabling like-for-like comparison.
Reason: The notes for the Phase II table explicitly state the cut-off grade used for reporting intercepts.
Evidence · text
“Only material intercepts of at least 5m apparent width at a cut-off grade of >/=0.04% WO 3 are included.”
TP26-044Tempiute · copperGrade: 0.004Grade Unit: %Intercept: 13.18 mView all detailsHide details
Identity
- Hole ID
- TP26-044
- Project
- Tempiute
- Commodity
- copper
- Region
- usa_nv
- Reported Region
- usa_nv
- Ticker
- GMET
Geometry
- Grade
- 0.004
- Grade Unit
- %
- Intercept
- 13.18 m
- From
- 175.14 m
- To
- 189.89 m
- Hole Depth
- 213.06 m
- Intercept Depth
- 175.14 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- TP26-044:175.14-189.89
Location
- Location
- South Thumb
- Easting
- 620968
- Northing
- 4165692
- CRS
- NAD83/ UTM Zone 11N Datum
- Azimuth
- 35 °
- Dip
- -47 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- MSA Labs and ALS Laboratories
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Compositing
- Cutoff Grade
- 0.04
- Cutoff Unit
- % WO3
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-21T00:00:00.000Z
Reasoning: This sub-interval shows trace copper mineralization, providing additional polymetallic context.
Positive factors
- QA/QC disclosed
Negative factors
- Apparent width only
Evidence · table
“0.004”
Context: 13.18
Tags used in scoring
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
Rejected tags
Rejected tags — excluded from scoring because their label or evidence could not be verified.
QA/QC DisclosedRejected · positive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Reason: The release mentions MSA Labs and ALS Laboratories as certified labs and details QA/QC procedures including standards, duplicates, and blanks.
Evidence · text
“MSA Labs (MSA) of Elko, Nevada which is an ISO9001 and ISO/IEC 17025 accredited laboratory. ... ALS Laboratories of Reno, Nevada. ... Guardian Metal’s QA/QC program includes regular insertion of standards, duplicates and blanks into the sample stream”
Apparent Width OnlyRejected · negative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Reason: The document explicitly states that true thicknesses are not yet known for any reported intercepts.
Evidence · text
“Note: True thicknesses of all intercepts reported herein are not yet known.”
Cut-off DisclosedRejected · positive · Story-specific tag
Cut-off grade used for resource reporting is clearly stated, enabling like-for-like comparison.
Reason: The notes for the Phase II table explicitly state the cut-off grade used for reporting intercepts.
Evidence · text
“Only material intercepts of at least 5m apparent width at a cut-off grade of >/=0.04% WO 3 are included.”
TP26-045Tempiute · tungstenGrade: 0.28Grade Unit: %Intercept: 5.16 mView all detailsHide details
Identity
- Hole ID
- TP26-045
- Project
- Tempiute
- Commodity
- tungsten
- Region
- usa_nv
- Reported Region
- usa_nv
- Ticker
- GMET
Geometry
- Grade
- 0.28
- Grade Unit
- %
- Intercept
- 5.16 m
- From
- 253.43 m
- To
- 258.59 m
- Hole Depth
- 267.31 m
- Intercept Depth
- 253.43 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- TP26-045:253.43-258.59
Location
- Location
- South Thumb
- Easting
- 620964
- Northing
- 4165689
- CRS
- NAD83/ UTM Zone 11N Datum
- Azimuth
- 350 °
- Dip
- -55 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- MSA Labs and ALS Laboratories
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Compositing
- Cutoff Grade
- 0.04
- Cutoff Unit
- % WO3
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-21T00:00:00.000Z
Reasoning: This intercept shows strong tungsten mineralization over a moderate width, contributing to the resource drilling program.
Positive factors
- Strong tungsten grade
- QA/QC disclosed
Negative factors
- Apparent width only
Evidence · table
“0.28”
Context: 5.16
Rejected tags
Rejected tags — excluded from scoring because their label or evidence could not be verified.
QA/QC DisclosedRejected · positive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Reason: The release mentions MSA Labs and ALS Laboratories as certified labs and details QA/QC procedures including standards, duplicates, and blanks.
Evidence · text
“MSA Labs (MSA) of Elko, Nevada which is an ISO9001 and ISO/IEC 17025 accredited laboratory. ... ALS Laboratories of Reno, Nevada. ... Guardian Metal’s QA/QC program includes regular insertion of standards, duplicates and blanks into the sample stream”
Apparent Width OnlyRejected · negative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Reason: The document explicitly states that true thicknesses are not yet known for any reported intercepts.
Evidence · text
“Note: True thicknesses of all intercepts reported herein are not yet known.”
Cut-off DisclosedRejected · positive · Story-specific tag
Cut-off grade used for resource reporting is clearly stated, enabling like-for-like comparison.
Reason: The notes for the Phase II table explicitly state the cut-off grade used for reporting intercepts.
Evidence · text
“Only material intercepts of at least 5m apparent width at a cut-off grade of >/=0.04% WO 3 are included.”
Infill DrillingRejected · neutral
Confirmatory drilling to raise resource confidence, not new discovery.
Reason: This hole is part of the Phase II program, which is described as resource drilling designed to test continuity and support a Mineral Resource estimate.
Evidence · text
“The ongoing Phase II resource drilling program is planned to include approximately 46 diamond drillholes, of which 28 have been completed to date. The program is designed to test the continuity, thickness and grade of mineralization around and beyond the historical underground workings, and to generate the data needed to support the potential definition of an initial Mineral Resource estimate at Tempiute.”
TP26-045Tempiute · zincGrade: 0.08Grade Unit: %Intercept: 5.16 mView all detailsHide details
Identity
- Hole ID
- TP26-045
- Project
- Tempiute
- Commodity
- zinc
- Region
- usa_nv
- Reported Region
- usa_nv
- Ticker
- GMET
Geometry
- Grade
- 0.08
- Grade Unit
- %
- Intercept
- 5.16 m
- From
- 253.43 m
- To
- 258.59 m
- Hole Depth
- 267.31 m
- Intercept Depth
- 253.43 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- TP26-045:253.43-258.59
Location
- Location
- South Thumb
- Easting
- 620964
- Northing
- 4165689
- CRS
- NAD83/ UTM Zone 11N Datum
- Azimuth
- 350 °
- Dip
- -55 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- MSA Labs and ALS Laboratories
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Compositing
- Cutoff Grade
- 0.04
- Cutoff Unit
- % WO3
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-21T00:00:00.000Z
Reasoning: This intercept shows trace zinc mineralization, providing additional polymetallic context.
Positive factors
- QA/QC disclosed
Negative factors
- Apparent width only
Evidence · table
“0.08”
Context: 5.16
Tags used in scoring
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
Rejected tags
Rejected tags — excluded from scoring because their label or evidence could not be verified.
QA/QC DisclosedRejected · positive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Reason: The release mentions MSA Labs and ALS Laboratories as certified labs and details QA/QC procedures including standards, duplicates, and blanks.
Evidence · text
“MSA Labs (MSA) of Elko, Nevada which is an ISO9001 and ISO/IEC 17025 accredited laboratory. ... ALS Laboratories of Reno, Nevada. ... Guardian Metal’s QA/QC program includes regular insertion of standards, duplicates and blanks into the sample stream”
Apparent Width OnlyRejected · negative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Reason: The document explicitly states that true thicknesses are not yet known for any reported intercepts.
Evidence · text
“Note: True thicknesses of all intercepts reported herein are not yet known.”
Cut-off DisclosedRejected · positive · Story-specific tag
Cut-off grade used for resource reporting is clearly stated, enabling like-for-like comparison.
Reason: The notes for the Phase II table explicitly state the cut-off grade used for reporting intercepts.
Evidence · text
“Only material intercepts of at least 5m apparent width at a cut-off grade of >/=0.04% WO 3 are included.”
TP26-045Tempiute · silverGrade: 2.75Grade Unit: ppmIntercept: 5.16 mView all detailsHide details
Identity
- Hole ID
- TP26-045
- Project
- Tempiute
- Commodity
- silver
- Region
- usa_nv
- Reported Region
- usa_nv
- Ticker
- GMET
Geometry
- Grade
- 2.75
- Grade Unit
- ppm
- Intercept
- 5.16 m
- From
- 253.43 m
- To
- 258.59 m
- Hole Depth
- 267.31 m
- Intercept Depth
- 253.43 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- TP26-045:253.43-258.59
Location
- Location
- South Thumb
- Easting
- 620964
- Northing
- 4165689
- CRS
- NAD83/ UTM Zone 11N Datum
- Azimuth
- 350 °
- Dip
- -55 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- MSA Labs and ALS Laboratories
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Compositing
- Cutoff Grade
- 0.04
- Cutoff Unit
- % WO3
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-21T00:00:00.000Z
Reasoning: This intercept shows trace silver mineralization, providing additional polymetallic context.
Positive factors
- QA/QC disclosed
Negative factors
- Apparent width only
Evidence · table
“2.75”
Context: 5.16
Tags used in scoring
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
Rejected tags
Rejected tags — excluded from scoring because their label or evidence could not be verified.
QA/QC DisclosedRejected · positive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Reason: The release mentions MSA Labs and ALS Laboratories as certified labs and details QA/QC procedures including standards, duplicates, and blanks.
Evidence · text
“MSA Labs (MSA) of Elko, Nevada which is an ISO9001 and ISO/IEC 17025 accredited laboratory. ... ALS Laboratories of Reno, Nevada. ... Guardian Metal’s QA/QC program includes regular insertion of standards, duplicates and blanks into the sample stream”
Apparent Width OnlyRejected · negative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Reason: The document explicitly states that true thicknesses are not yet known for any reported intercepts.
Evidence · text
“Note: True thicknesses of all intercepts reported herein are not yet known.”
Cut-off DisclosedRejected · positive · Story-specific tag
Cut-off grade used for resource reporting is clearly stated, enabling like-for-like comparison.
Reason: The notes for the Phase II table explicitly state the cut-off grade used for reporting intercepts.
Evidence · text
“Only material intercepts of at least 5m apparent width at a cut-off grade of >/=0.04% WO 3 are included.”
TP26-045Tempiute · copperGrade: 0.025Grade Unit: %Intercept: 5.16 mView all detailsHide details
Identity
- Hole ID
- TP26-045
- Project
- Tempiute
- Commodity
- copper
- Region
- usa_nv
- Reported Region
- usa_nv
- Ticker
- GMET
Geometry
- Grade
- 0.025
- Grade Unit
- %
- Intercept
- 5.16 m
- From
- 253.43 m
- To
- 258.59 m
- Hole Depth
- 267.31 m
- Intercept Depth
- 253.43 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- TP26-045:253.43-258.59
Location
- Location
- South Thumb
- Easting
- 620964
- Northing
- 4165689
- CRS
- NAD83/ UTM Zone 11N Datum
- Azimuth
- 350 °
- Dip
- -55 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- MSA Labs and ALS Laboratories
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Compositing
- Cutoff Grade
- 0.04
- Cutoff Unit
- % WO3
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-21T00:00:00.000Z
Reasoning: This intercept shows trace copper mineralization, providing additional polymetallic context.
Positive factors
- QA/QC disclosed
Negative factors
- Apparent width only
Evidence · table
“0.025”
Context: 5.16
Tags used in scoring
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
Rejected tags
Rejected tags — excluded from scoring because their label or evidence could not be verified.
QA/QC DisclosedRejected · positive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Reason: The release mentions MSA Labs and ALS Laboratories as certified labs and details QA/QC procedures including standards, duplicates, and blanks.
Evidence · text
“MSA Labs (MSA) of Elko, Nevada which is an ISO9001 and ISO/IEC 17025 accredited laboratory. ... ALS Laboratories of Reno, Nevada. ... Guardian Metal’s QA/QC program includes regular insertion of standards, duplicates and blanks into the sample stream”
Apparent Width OnlyRejected · negative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Reason: The document explicitly states that true thicknesses are not yet known for any reported intercepts.
Evidence · text
“Note: True thicknesses of all intercepts reported herein are not yet known.”
Cut-off DisclosedRejected · positive · Story-specific tag
Cut-off grade used for resource reporting is clearly stated, enabling like-for-like comparison.
Reason: The notes for the Phase II table explicitly state the cut-off grade used for reporting intercepts.
Evidence · text
“Only material intercepts of at least 5m apparent width at a cut-off grade of >/=0.04% WO 3 are included.”
TP26-046Tempiute · tungstenGrade: 0.27Grade Unit: %Intercept: 27.86 mView all detailsHide details
Identity
- Hole ID
- TP26-046
- Project
- Tempiute
- Commodity
- tungsten
- Region
- usa_nv
- Reported Region
- usa_nv
- Ticker
- GMET
Geometry
- Grade
- 0.27
- Grade Unit
- %
- Intercept
- 27.86 m
- From
- 68.6 m
- To
- 96.46 m
- Hole Depth
- 205.27 m
- Intercept Depth
- 68.6 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- TP26-046:68.6-96.46
Location
- Location
- Schofield
- Easting
- 621225
- Northing
- 4165537
- CRS
- NAD83/ UTM Zone 11N Datum
- Azimuth
- 260 °
- Dip
- -50 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- MSA Labs and ALS Laboratories
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Compositing
- Cutoff Grade
- 0.04
- Cutoff Unit
- % WO3
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-21T00:00:00.000Z
Reasoning: This intercept shows strong tungsten mineralization over a good width, contributing to the resource drilling program.
Positive factors
- Strong tungsten grade
- Good intercept length
- QA/QC disclosed
Negative factors
- Apparent width only
Evidence · table
“0.27”
Context: 27.86
Rejected tags
Rejected tags — excluded from scoring because their label or evidence could not be verified.
QA/QC DisclosedRejected · positive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Reason: The release mentions MSA Labs and ALS Laboratories as certified labs and details QA/QC procedures including standards, duplicates, and blanks.
Evidence · text
“MSA Labs (MSA) of Elko, Nevada which is an ISO9001 and ISO/IEC 17025 accredited laboratory. ... ALS Laboratories of Reno, Nevada. ... Guardian Metal’s QA/QC program includes regular insertion of standards, duplicates and blanks into the sample stream”
Apparent Width OnlyRejected · negative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Reason: The document explicitly states that true thicknesses are not yet known for any reported intercepts.
Evidence · text
“Note: True thicknesses of all intercepts reported herein are not yet known.”
Cut-off DisclosedRejected · positive · Story-specific tag
Cut-off grade used for resource reporting is clearly stated, enabling like-for-like comparison.
Reason: The notes for the Phase II table explicitly state the cut-off grade used for reporting intercepts.
Evidence · text
“Only material intercepts of at least 5m apparent width at a cut-off grade of >/=0.04% WO 3 are included.”
Infill DrillingRejected · neutral
Confirmatory drilling to raise resource confidence, not new discovery.
Reason: This hole is part of the Phase II program, which is described as resource drilling designed to test continuity and support a Mineral Resource estimate.
Evidence · text
“The ongoing Phase II resource drilling program is planned to include approximately 46 diamond drillholes, of which 28 have been completed to date. The program is designed to test the continuity, thickness and grade of mineralization around and beyond the historical underground workings, and to generate the data needed to support the potential definition of an initial Mineral Resource estimate at Tempiute.”
TP26-046Tempiute · zincGrade: 0.28Grade Unit: %Intercept: 27.86 mView all detailsHide details
Identity
- Hole ID
- TP26-046
- Project
- Tempiute
- Commodity
- zinc
- Region
- usa_nv
- Reported Region
- usa_nv
- Ticker
- GMET
Geometry
- Grade
- 0.28
- Grade Unit
- %
- Intercept
- 27.86 m
- From
- 68.6 m
- To
- 96.46 m
- Hole Depth
- 205.27 m
- Intercept Depth
- 68.6 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- TP26-046:68.6-96.46
Location
- Location
- Schofield
- Easting
- 621225
- Northing
- 4165537
- CRS
- NAD83/ UTM Zone 11N Datum
- Azimuth
- 260 °
- Dip
- -50 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- MSA Labs and ALS Laboratories
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Compositing
- Cutoff Grade
- 0.04
- Cutoff Unit
- % WO3
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-21T00:00:00.000Z
Reasoning: This intercept shows a moderate zinc grade over a good width, providing additional polymetallic context to the tungsten mineralization.
Positive factors
- QA/QC disclosed
Negative factors
- Apparent width only
Evidence · table
“0.28”
Context: 27.86
Tags used in scoring
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
Rejected tags
Rejected tags — excluded from scoring because their label or evidence could not be verified.
QA/QC DisclosedRejected · positive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Reason: The release mentions MSA Labs and ALS Laboratories as certified labs and details QA/QC procedures including standards, duplicates, and blanks.
Evidence · text
“MSA Labs (MSA) of Elko, Nevada which is an ISO9001 and ISO/IEC 17025 accredited laboratory. ... ALS Laboratories of Reno, Nevada. ... Guardian Metal’s QA/QC program includes regular insertion of standards, duplicates and blanks into the sample stream”
Apparent Width OnlyRejected · negative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Reason: The document explicitly states that true thicknesses are not yet known for any reported intercepts.
Evidence · text
“Note: True thicknesses of all intercepts reported herein are not yet known.”
Cut-off DisclosedRejected · positive · Story-specific tag
Cut-off grade used for resource reporting is clearly stated, enabling like-for-like comparison.
Reason: The notes for the Phase II table explicitly state the cut-off grade used for reporting intercepts.
Evidence · text
“Only material intercepts of at least 5m apparent width at a cut-off grade of >/=0.04% WO 3 are included.”
TP26-046Tempiute · silverGrade: 0.84Grade Unit: ppmIntercept: 27.86 mView all detailsHide details
Identity
- Hole ID
- TP26-046
- Project
- Tempiute
- Commodity
- silver
- Region
- usa_nv
- Reported Region
- usa_nv
- Ticker
- GMET
Geometry
- Grade
- 0.84
- Grade Unit
- ppm
- Intercept
- 27.86 m
- From
- 68.6 m
- To
- 96.46 m
- Hole Depth
- 205.27 m
- Intercept Depth
- 68.6 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- TP26-046:68.6-96.46
Location
- Location
- Schofield
- Easting
- 621225
- Northing
- 4165537
- CRS
- NAD83/ UTM Zone 11N Datum
- Azimuth
- 260 °
- Dip
- -50 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- MSA Labs and ALS Laboratories
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Compositing
- Cutoff Grade
- 0.04
- Cutoff Unit
- % WO3
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-21T00:00:00.000Z
Reasoning: This intercept shows trace silver mineralization, providing additional polymetallic context.
Positive factors
- QA/QC disclosed
Negative factors
- Apparent width only
Evidence · table
“0.84”
Context: 27.86
Tags used in scoring
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
Rejected tags
Rejected tags — excluded from scoring because their label or evidence could not be verified.
QA/QC DisclosedRejected · positive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Reason: The release mentions MSA Labs and ALS Laboratories as certified labs and details QA/QC procedures including standards, duplicates, and blanks.
Evidence · text
“MSA Labs (MSA) of Elko, Nevada which is an ISO9001 and ISO/IEC 17025 accredited laboratory. ... ALS Laboratories of Reno, Nevada. ... Guardian Metal’s QA/QC program includes regular insertion of standards, duplicates and blanks into the sample stream”
Apparent Width OnlyRejected · negative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Reason: The document explicitly states that true thicknesses are not yet known for any reported intercepts.
Evidence · text
“Note: True thicknesses of all intercepts reported herein are not yet known.”
Cut-off DisclosedRejected · positive · Story-specific tag
Cut-off grade used for resource reporting is clearly stated, enabling like-for-like comparison.
Reason: The notes for the Phase II table explicitly state the cut-off grade used for reporting intercepts.
Evidence · text
“Only material intercepts of at least 5m apparent width at a cut-off grade of >/=0.04% WO 3 are included.”
TP26-046Tempiute · copperGrade: 0.028Grade Unit: %Intercept: 27.86 mView all detailsHide details
Identity
- Hole ID
- TP26-046
- Project
- Tempiute
- Commodity
- copper
- Region
- usa_nv
- Reported Region
- usa_nv
- Ticker
- GMET
Geometry
- Grade
- 0.028
- Grade Unit
- %
- Intercept
- 27.86 m
- From
- 68.6 m
- To
- 96.46 m
- Hole Depth
- 205.27 m
- Intercept Depth
- 68.6 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- TP26-046:68.6-96.46
Location
- Location
- Schofield
- Easting
- 621225
- Northing
- 4165537
- CRS
- NAD83/ UTM Zone 11N Datum
- Azimuth
- 260 °
- Dip
- -50 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- MSA Labs and ALS Laboratories
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Compositing
- Cutoff Grade
- 0.04
- Cutoff Unit
- % WO3
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-21T00:00:00.000Z
Reasoning: This intercept shows trace copper mineralization, providing additional polymetallic context.
Positive factors
- QA/QC disclosed
Negative factors
- Apparent width only
Evidence · table
“0.028”
Context: 27.86
Tags used in scoring
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
Rejected tags
Rejected tags — excluded from scoring because their label or evidence could not be verified.
QA/QC DisclosedRejected · positive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Reason: The release mentions MSA Labs and ALS Laboratories as certified labs and details QA/QC procedures including standards, duplicates, and blanks.
Evidence · text
“MSA Labs (MSA) of Elko, Nevada which is an ISO9001 and ISO/IEC 17025 accredited laboratory. ... ALS Laboratories of Reno, Nevada. ... Guardian Metal’s QA/QC program includes regular insertion of standards, duplicates and blanks into the sample stream”
Apparent Width OnlyRejected · negative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Reason: The document explicitly states that true thicknesses are not yet known for any reported intercepts.
Evidence · text
“Note: True thicknesses of all intercepts reported herein are not yet known.”
Cut-off DisclosedRejected · positive · Story-specific tag
Cut-off grade used for resource reporting is clearly stated, enabling like-for-like comparison.
Reason: The notes for the Phase II table explicitly state the cut-off grade used for reporting intercepts.
Evidence · text
“Only material intercepts of at least 5m apparent width at a cut-off grade of >/=0.04% WO 3 are included.”
TP26-046Tempiute · tungstenGrade: 0.36Grade Unit: %Intercept: 10.45 mView all detailsHide details
Identity
- Hole ID
- TP26-046
- Project
- Tempiute
- Commodity
- tungsten
- Region
- usa_nv
- Reported Region
- usa_nv
- Ticker
- GMET
Geometry
- Grade
- 0.36
- Grade Unit
- %
- Intercept
- 10.45 m
- From
- 70.1 m
- To
- 80.55 m
- Hole Depth
- 205.27 m
- Intercept Depth
- 68.6 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- TP26-046:70.1-80.55
Location
- Location
- Schofield
- Easting
- 621225
- Northing
- 4165537
- CRS
- NAD83/ UTM Zone 11N Datum
- Azimuth
- 260 °
- Dip
- -50 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- MSA Labs and ALS Laboratories
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Compositing
- Cutoff Grade
- 0.04
- Cutoff Unit
- % WO3
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-21T00:00:00.000Z
Reasoning: This sub-interval shows higher-grade tungsten mineralization within the broader intercept, indicating a concentrated zone.
Positive factors
- Strong tungsten grade
- QA/QC disclosed
Negative factors
- Apparent width only
Evidence · table
“0.36”
Context: 10.45
Rejected tags
Rejected tags — excluded from scoring because their label or evidence could not be verified.
QA/QC DisclosedRejected · positive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Reason: The release mentions MSA Labs and ALS Laboratories as certified labs and details QA/QC procedures including standards, duplicates, and blanks.
Evidence · text
“MSA Labs (MSA) of Elko, Nevada which is an ISO9001 and ISO/IEC 17025 accredited laboratory. ... ALS Laboratories of Reno, Nevada. ... Guardian Metal’s QA/QC program includes regular insertion of standards, duplicates and blanks into the sample stream”
Apparent Width OnlyRejected · negative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Reason: The document explicitly states that true thicknesses are not yet known for any reported intercepts.
Evidence · text
“Note: True thicknesses of all intercepts reported herein are not yet known.”
Cut-off DisclosedRejected · positive · Story-specific tag
Cut-off grade used for resource reporting is clearly stated, enabling like-for-like comparison.
Reason: The notes for the Phase II table explicitly state the cut-off grade used for reporting intercepts.
Evidence · text
“Only material intercepts of at least 5m apparent width at a cut-off grade of >/=0.04% WO 3 are included.”
Infill DrillingRejected · neutral
Confirmatory drilling to raise resource confidence, not new discovery.
Reason: This hole is part of the Phase II program, which is described as resource drilling designed to test continuity and support a Mineral Resource estimate.
Evidence · text
“The ongoing Phase II resource drilling program is planned to include approximately 46 diamond drillholes, of which 28 have been completed to date. The program is designed to test the continuity, thickness and grade of mineralization around and beyond the historical underground workings, and to generate the data needed to support the potential definition of an initial Mineral Resource estimate at Tempiute.”
TP26-046Tempiute · zincGrade: 0.13Grade Unit: %Intercept: 10.45 mView all detailsHide details
Identity
- Hole ID
- TP26-046
- Project
- Tempiute
- Commodity
- zinc
- Region
- usa_nv
- Reported Region
- usa_nv
- Ticker
- GMET
Geometry
- Grade
- 0.13
- Grade Unit
- %
- Intercept
- 10.45 m
- From
- 70.1 m
- To
- 80.55 m
- Hole Depth
- 205.27 m
- Intercept Depth
- 68.6 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- TP26-046:70.1-80.55
Location
- Location
- Schofield
- Easting
- 621225
- Northing
- 4165537
- CRS
- NAD83/ UTM Zone 11N Datum
- Azimuth
- 260 °
- Dip
- -50 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- MSA Labs and ALS Laboratories
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Compositing
- Cutoff Grade
- 0.04
- Cutoff Unit
- % WO3
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-21T00:00:00.000Z
Reasoning: This sub-interval shows a moderate zinc grade, adding to the polymetallic potential.
Positive factors
- QA/QC disclosed
Negative factors
- Apparent width only
Evidence · table
“0.13”
Context: 10.45
Tags used in scoring
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
Rejected tags
Rejected tags — excluded from scoring because their label or evidence could not be verified.
QA/QC DisclosedRejected · positive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Reason: The release mentions MSA Labs and ALS Laboratories as certified labs and details QA/QC procedures including standards, duplicates, and blanks.
Evidence · text
“MSA Labs (MSA) of Elko, Nevada which is an ISO9001 and ISO/IEC 17025 accredited laboratory. ... ALS Laboratories of Reno, Nevada. ... Guardian Metal’s QA/QC program includes regular insertion of standards, duplicates and blanks into the sample stream”
Apparent Width OnlyRejected · negative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Reason: The document explicitly states that true thicknesses are not yet known for any reported intercepts.
Evidence · text
“Note: True thicknesses of all intercepts reported herein are not yet known.”
Cut-off DisclosedRejected · positive · Story-specific tag
Cut-off grade used for resource reporting is clearly stated, enabling like-for-like comparison.
Reason: The notes for the Phase II table explicitly state the cut-off grade used for reporting intercepts.
Evidence · text
“Only material intercepts of at least 5m apparent width at a cut-off grade of >/=0.04% WO 3 are included.”
TP26-046Tempiute · silverGrade: 1.42Grade Unit: ppmIntercept: 10.45 mView all detailsHide details
Identity
- Hole ID
- TP26-046
- Project
- Tempiute
- Commodity
- silver
- Region
- usa_nv
- Reported Region
- usa_nv
- Ticker
- GMET
Geometry
- Grade
- 1.42
- Grade Unit
- ppm
- Intercept
- 10.45 m
- From
- 70.1 m
- To
- 80.55 m
- Hole Depth
- 205.27 m
- Intercept Depth
- 68.6 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- TP26-046:70.1-80.55
Location
- Location
- Schofield
- Easting
- 621225
- Northing
- 4165537
- CRS
- NAD83/ UTM Zone 11N Datum
- Azimuth
- 260 °
- Dip
- -50 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- MSA Labs and ALS Laboratories
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Compositing
- Cutoff Grade
- 0.04
- Cutoff Unit
- % WO3
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-21T00:00:00.000Z
Reasoning: This sub-interval shows trace silver mineralization, providing additional polymetallic context.
Positive factors
- QA/QC disclosed
Negative factors
- Apparent width only
Evidence · table
“1.42”
Context: 10.45
Tags used in scoring
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
Rejected tags
Rejected tags — excluded from scoring because their label or evidence could not be verified.
QA/QC DisclosedRejected · positive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Reason: The release mentions MSA Labs and ALS Laboratories as certified labs and details QA/QC procedures including standards, duplicates, and blanks.
Evidence · text
“MSA Labs (MSA) of Elko, Nevada which is an ISO9001 and ISO/IEC 17025 accredited laboratory. ... ALS Laboratories of Reno, Nevada. ... Guardian Metal’s QA/QC program includes regular insertion of standards, duplicates and blanks into the sample stream”
Apparent Width OnlyRejected · negative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Reason: The document explicitly states that true thicknesses are not yet known for any reported intercepts.
Evidence · text
“Note: True thicknesses of all intercepts reported herein are not yet known.”
Cut-off DisclosedRejected · positive · Story-specific tag
Cut-off grade used for resource reporting is clearly stated, enabling like-for-like comparison.
Reason: The notes for the Phase II table explicitly state the cut-off grade used for reporting intercepts.
Evidence · text
“Only material intercepts of at least 5m apparent width at a cut-off grade of >/=0.04% WO 3 are included.”
TP26-046Tempiute · copperGrade: 0.028Grade Unit: %Intercept: 10.45 mView all detailsHide details
Identity
- Hole ID
- TP26-046
- Project
- Tempiute
- Commodity
- copper
- Region
- usa_nv
- Reported Region
- usa_nv
- Ticker
- GMET
Geometry
- Grade
- 0.028
- Grade Unit
- %
- Intercept
- 10.45 m
- From
- 70.1 m
- To
- 80.55 m
- Hole Depth
- 205.27 m
- Intercept Depth
- 68.6 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- TP26-046:70.1-80.55
Location
- Location
- Schofield
- Easting
- 621225
- Northing
- 4165537
- CRS
- NAD83/ UTM Zone 11N Datum
- Azimuth
- 260 °
- Dip
- -50 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- MSA Labs and ALS Laboratories
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Compositing
- Cutoff Grade
- 0.04
- Cutoff Unit
- % WO3
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-21T00:00:00.000Z
Reasoning: This sub-interval shows trace copper mineralization, providing additional polymetallic context.
Positive factors
- QA/QC disclosed
Negative factors
- Apparent width only
Evidence · table
“0.028”
Context: 10.45
Tags used in scoring
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
Rejected tags
Rejected tags — excluded from scoring because their label or evidence could not be verified.
QA/QC DisclosedRejected · positive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Reason: The release mentions MSA Labs and ALS Laboratories as certified labs and details QA/QC procedures including standards, duplicates, and blanks.
Evidence · text
“MSA Labs (MSA) of Elko, Nevada which is an ISO9001 and ISO/IEC 17025 accredited laboratory. ... ALS Laboratories of Reno, Nevada. ... Guardian Metal’s QA/QC program includes regular insertion of standards, duplicates and blanks into the sample stream”
Apparent Width OnlyRejected · negative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Reason: The document explicitly states that true thicknesses are not yet known for any reported intercepts.
Evidence · text
“Note: True thicknesses of all intercepts reported herein are not yet known.”
Cut-off DisclosedRejected · positive · Story-specific tag
Cut-off grade used for resource reporting is clearly stated, enabling like-for-like comparison.
Reason: The notes for the Phase II table explicitly state the cut-off grade used for reporting intercepts.
Evidence · text
“Only material intercepts of at least 5m apparent width at a cut-off grade of >/=0.04% WO 3 are included.”
TP26-046Tempiute · tungstenGrade: 0.31Grade Unit: %Intercept: 5.86 mView all detailsHide details
Identity
- Hole ID
- TP26-046
- Project
- Tempiute
- Commodity
- tungsten
- Region
- usa_nv
- Reported Region
- usa_nv
- Ticker
- GMET
Geometry
- Grade
- 0.31
- Grade Unit
- %
- Intercept
- 5.86 m
- From
- 85.94 m
- To
- 91.8 m
- Hole Depth
- 205.27 m
- Intercept Depth
- 68.6 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- TP26-046:85.94-91.8
Location
- Location
- Schofield
- Easting
- 621225
- Northing
- 4165537
- CRS
- NAD83/ UTM Zone 11N Datum
- Azimuth
- 260 °
- Dip
- -50 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- MSA Labs and ALS Laboratories
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Compositing
- Cutoff Grade
- 0.04
- Cutoff Unit
- % WO3
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-21T00:00:00.000Z
Reasoning: This sub-interval shows higher-grade tungsten mineralization within the broader intercept, indicating a concentrated zone.
Positive factors
- Strong tungsten grade
- QA/QC disclosed
Negative factors
- Apparent width only
Evidence · table
“0.31”
Context: 5.86
Rejected tags
Rejected tags — excluded from scoring because their label or evidence could not be verified.
QA/QC DisclosedRejected · positive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Reason: The release mentions MSA Labs and ALS Laboratories as certified labs and details QA/QC procedures including standards, duplicates, and blanks.
Evidence · text
“MSA Labs (MSA) of Elko, Nevada which is an ISO9001 and ISO/IEC 17025 accredited laboratory. ... ALS Laboratories of Reno, Nevada. ... Guardian Metal’s QA/QC program includes regular insertion of standards, duplicates and blanks into the sample stream”
Apparent Width OnlyRejected · negative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Reason: The document explicitly states that true thicknesses are not yet known for any reported intercepts.
Evidence · text
“Note: True thicknesses of all intercepts reported herein are not yet known.”
Cut-off DisclosedRejected · positive · Story-specific tag
Cut-off grade used for resource reporting is clearly stated, enabling like-for-like comparison.
Reason: The notes for the Phase II table explicitly state the cut-off grade used for reporting intercepts.
Evidence · text
“Only material intercepts of at least 5m apparent width at a cut-off grade of >/=0.04% WO 3 are included.”
Infill DrillingRejected · neutral
Confirmatory drilling to raise resource confidence, not new discovery.
Reason: This hole is part of the Phase II program, which is described as resource drilling designed to test continuity and support a Mineral Resource estimate.
Evidence · text
“The ongoing Phase II resource drilling program is planned to include approximately 46 diamond drillholes, of which 28 have been completed to date. The program is designed to test the continuity, thickness and grade of mineralization around and beyond the historical underground workings, and to generate the data needed to support the potential definition of an initial Mineral Resource estimate at Tempiute.”
TP26-046Tempiute · zincGrade: 0.54Grade Unit: %Intercept: 5.86 mView all detailsHide details
Identity
- Hole ID
- TP26-046
- Project
- Tempiute
- Commodity
- zinc
- Region
- usa_nv
- Reported Region
- usa_nv
- Ticker
- GMET
Geometry
- Grade
- 0.54
- Grade Unit
- %
- Intercept
- 5.86 m
- From
- 85.94 m
- To
- 91.8 m
- Hole Depth
- 205.27 m
- Intercept Depth
- 68.6 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- TP26-046:85.94-91.8
Location
- Location
- Schofield
- Easting
- 621225
- Northing
- 4165537
- CRS
- NAD83/ UTM Zone 11N Datum
- Azimuth
- 260 °
- Dip
- -50 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- MSA Labs and ALS Laboratories
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Compositing
- Cutoff Grade
- 0.04
- Cutoff Unit
- % WO3
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-21T00:00:00.000Z
Reasoning: This sub-interval shows a higher zinc grade, adding to the polymetallic potential.
Positive factors
- QA/QC disclosed
Negative factors
- Apparent width only
Evidence · table
“0.54”
Context: 5.86
Tags used in scoring
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
Rejected tags
Rejected tags — excluded from scoring because their label or evidence could not be verified.
QA/QC DisclosedRejected · positive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Reason: The release mentions MSA Labs and ALS Laboratories as certified labs and details QA/QC procedures including standards, duplicates, and blanks.
Evidence · text
“MSA Labs (MSA) of Elko, Nevada which is an ISO9001 and ISO/IEC 17025 accredited laboratory. ... ALS Laboratories of Reno, Nevada. ... Guardian Metal’s QA/QC program includes regular insertion of standards, duplicates and blanks into the sample stream”
Apparent Width OnlyRejected · negative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Reason: The document explicitly states that true thicknesses are not yet known for any reported intercepts.
Evidence · text
“Note: True thicknesses of all intercepts reported herein are not yet known.”
Cut-off DisclosedRejected · positive · Story-specific tag
Cut-off grade used for resource reporting is clearly stated, enabling like-for-like comparison.
Reason: The notes for the Phase II table explicitly state the cut-off grade used for reporting intercepts.
Evidence · text
“Only material intercepts of at least 5m apparent width at a cut-off grade of >/=0.04% WO 3 are included.”
TP26-046Tempiute · silverGrade: 0.47Grade Unit: ppmIntercept: 5.86 mView all detailsHide details
Identity
- Hole ID
- TP26-046
- Project
- Tempiute
- Commodity
- silver
- Region
- usa_nv
- Reported Region
- usa_nv
- Ticker
- GMET
Geometry
- Grade
- 0.47
- Grade Unit
- ppm
- Intercept
- 5.86 m
- From
- 85.94 m
- To
- 91.8 m
- Hole Depth
- 205.27 m
- Intercept Depth
- 68.6 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- TP26-046:85.94-91.8
Location
- Location
- Schofield
- Easting
- 621225
- Northing
- 4165537
- CRS
- NAD83/ UTM Zone 11N Datum
- Azimuth
- 260 °
- Dip
- -50 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- MSA Labs and ALS Laboratories
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Compositing
- Cutoff Grade
- 0.04
- Cutoff Unit
- % WO3
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-21T00:00:00.000Z
Reasoning: This sub-interval shows trace silver mineralization, providing additional polymetallic context.
Positive factors
- QA/QC disclosed
Negative factors
- Apparent width only
Evidence · table
“0.47”
Context: 5.86
Tags used in scoring
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
Rejected tags
Rejected tags — excluded from scoring because their label or evidence could not be verified.
QA/QC DisclosedRejected · positive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Reason: The release mentions MSA Labs and ALS Laboratories as certified labs and details QA/QC procedures including standards, duplicates, and blanks.
Evidence · text
“MSA Labs (MSA) of Elko, Nevada which is an ISO9001 and ISO/IEC 17025 accredited laboratory. ... ALS Laboratories of Reno, Nevada. ... Guardian Metal’s QA/QC program includes regular insertion of standards, duplicates and blanks into the sample stream”
Apparent Width OnlyRejected · negative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Reason: The document explicitly states that true thicknesses are not yet known for any reported intercepts.
Evidence · text
“Note: True thicknesses of all intercepts reported herein are not yet known.”
Cut-off DisclosedRejected · positive · Story-specific tag
Cut-off grade used for resource reporting is clearly stated, enabling like-for-like comparison.
Reason: The notes for the Phase II table explicitly state the cut-off grade used for reporting intercepts.
Evidence · text
“Only material intercepts of at least 5m apparent width at a cut-off grade of >/=0.04% WO 3 are included.”
TP26-046Tempiute · copperGrade: 0.04Grade Unit: %Intercept: 5.86 mView all detailsHide details
Identity
- Hole ID
- TP26-046
- Project
- Tempiute
- Commodity
- copper
- Region
- usa_nv
- Reported Region
- usa_nv
- Ticker
- GMET
Geometry
- Grade
- 0.04
- Grade Unit
- %
- Intercept
- 5.86 m
- From
- 85.94 m
- To
- 91.8 m
- Hole Depth
- 205.27 m
- Intercept Depth
- 68.6 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- TP26-046:85.94-91.8
Location
- Location
- Schofield
- Easting
- 621225
- Northing
- 4165537
- CRS
- NAD83/ UTM Zone 11N Datum
- Azimuth
- 260 °
- Dip
- -50 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- MSA Labs and ALS Laboratories
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Compositing
- Cutoff Grade
- 0.04
- Cutoff Unit
- % WO3
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-21T00:00:00.000Z
Reasoning: This sub-interval shows trace copper mineralization, providing additional polymetallic context.
Positive factors
- QA/QC disclosed
Negative factors
- Apparent width only
Evidence · table
“0.040”
Context: 5.86
Tags used in scoring
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
Rejected tags
Rejected tags — excluded from scoring because their label or evidence could not be verified.
QA/QC DisclosedRejected · positive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Reason: The release mentions MSA Labs and ALS Laboratories as certified labs and details QA/QC procedures including standards, duplicates, and blanks.
Evidence · text
“MSA Labs (MSA) of Elko, Nevada which is an ISO9001 and ISO/IEC 17025 accredited laboratory. ... ALS Laboratories of Reno, Nevada. ... Guardian Metal’s QA/QC program includes regular insertion of standards, duplicates and blanks into the sample stream”
Apparent Width OnlyRejected · negative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Reason: The document explicitly states that true thicknesses are not yet known for any reported intercepts.
Evidence · text
“Note: True thicknesses of all intercepts reported herein are not yet known.”
Cut-off DisclosedRejected · positive · Story-specific tag
Cut-off grade used for resource reporting is clearly stated, enabling like-for-like comparison.
Reason: The notes for the Phase II table explicitly state the cut-off grade used for reporting intercepts.
Evidence · text
“Only material intercepts of at least 5m apparent width at a cut-off grade of >/=0.04% WO 3 are included.”
TP26-046Tempiute · tungstenGrade: 0.34Grade Unit: %Intercept: 91.95 mView all detailsHide details
Identity
- Hole ID
- TP26-046
- Project
- Tempiute
- Commodity
- tungsten
- Region
- usa_nv
- Reported Region
- usa_nv
- Ticker
- GMET
Geometry
- Grade
- 0.34
- Grade Unit
- %
- Intercept
- 91.95 m
- From
- 102.5 m
- To
- 194.45 m
- Hole Depth
- 205.27 m
- Intercept Depth
- 68.6 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- TP26-046:102.5-194.45
Location
- Location
- Schofield
- Easting
- 621225
- Northing
- 4165537
- CRS
- NAD83/ UTM Zone 11N Datum
- Azimuth
- 260 °
- Dip
- -50 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- MSA Labs and ALS Laboratories
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Compositing
- Cutoff Grade
- 0.04
- Cutoff Unit
- % WO3
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-21T00:00:00.000Z
Reasoning: This is a very broad and strong tungsten intercept, reinforcing confidence in the project's potential and driving the decision for accelerated underground rehabilitation.
Positive factors
- Broad intercept length
- Strong tungsten grade
- QA/QC disclosed
Negative factors
- Apparent width only
Evidence · table
“0.34”
Context: 91.95
Rejected tags
Rejected tags — excluded from scoring because their label or evidence could not be verified.
QA/QC DisclosedRejected · positive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Reason: The release mentions MSA Labs and ALS Laboratories as certified labs and details QA/QC procedures including standards, duplicates, and blanks.
Evidence · text
“MSA Labs (MSA) of Elko, Nevada which is an ISO9001 and ISO/IEC 17025 accredited laboratory. ... ALS Laboratories of Reno, Nevada. ... Guardian Metal’s QA/QC program includes regular insertion of standards, duplicates and blanks into the sample stream”
Apparent Width OnlyRejected · negative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Reason: The document explicitly states that true thicknesses are not yet known for any reported intercepts.
Evidence · text
“Note: True thicknesses of all intercepts reported herein are not yet known.”
Cut-off DisclosedRejected · positive · Story-specific tag
Cut-off grade used for resource reporting is clearly stated, enabling like-for-like comparison.
Reason: The notes for the Phase II table explicitly state the cut-off grade used for reporting intercepts.
Evidence · text
“Only material intercepts of at least 5m apparent width at a cut-off grade of >/=0.04% WO 3 are included.”
Infill DrillingRejected · neutral
Confirmatory drilling to raise resource confidence, not new discovery.
Reason: This hole is part of the Phase II program, which is described as resource drilling designed to test continuity and support a Mineral Resource estimate.
Evidence · text
“The ongoing Phase II resource drilling program is planned to include approximately 46 diamond drillholes, of which 28 have been completed to date. The program is designed to test the continuity, thickness and grade of mineralization around and beyond the historical underground workings, and to generate the data needed to support the potential definition of an initial Mineral Resource estimate at Tempiute.”
TP26-046Tempiute · zincGrade: 0.79Grade Unit: %Intercept: 91.95 mView all detailsHide details
Identity
- Hole ID
- TP26-046
- Project
- Tempiute
- Commodity
- zinc
- Region
- usa_nv
- Reported Region
- usa_nv
- Ticker
- GMET
Geometry
- Grade
- 0.79
- Grade Unit
- %
- Intercept
- 91.95 m
- From
- 102.5 m
- To
- 194.45 m
- Hole Depth
- 205.27 m
- Intercept Depth
- 68.6 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- TP26-046:102.5-194.45
Location
- Location
- Schofield
- Easting
- 621225
- Northing
- 4165537
- CRS
- NAD83/ UTM Zone 11N Datum
- Azimuth
- 260 °
- Dip
- -50 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- MSA Labs and ALS Laboratories
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Compositing
- Cutoff Grade
- 0.04
- Cutoff Unit
- % WO3
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-21T00:00:00.000Z
Reasoning: This broad intercept shows a good zinc grade, providing significant polymetallic context to the tungsten mineralization.
Positive factors
- QA/QC disclosed
Negative factors
- Apparent width only
Evidence · table
“0.79”
Context: 91.95
Tags used in scoring
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
Rejected tags
Rejected tags — excluded from scoring because their label or evidence could not be verified.
QA/QC DisclosedRejected · positive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Reason: The release mentions MSA Labs and ALS Laboratories as certified labs and details QA/QC procedures including standards, duplicates, and blanks.
Evidence · text
“MSA Labs (MSA) of Elko, Nevada which is an ISO9001 and ISO/IEC 17025 accredited laboratory. ... ALS Laboratories of Reno, Nevada. ... Guardian Metal’s QA/QC program includes regular insertion of standards, duplicates and blanks into the sample stream”
Apparent Width OnlyRejected · negative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Reason: The document explicitly states that true thicknesses are not yet known for any reported intercepts.
Evidence · text
“Note: True thicknesses of all intercepts reported herein are not yet known.”
Cut-off DisclosedRejected · positive · Story-specific tag
Cut-off grade used for resource reporting is clearly stated, enabling like-for-like comparison.
Reason: The notes for the Phase II table explicitly state the cut-off grade used for reporting intercepts.
Evidence · text
“Only material intercepts of at least 5m apparent width at a cut-off grade of >/=0.04% WO 3 are included.”
TP26-046Tempiute · silverGrade: 4.13Grade Unit: ppmIntercept: 91.95 mView all detailsHide details
Identity
- Hole ID
- TP26-046
- Project
- Tempiute
- Commodity
- silver
- Region
- usa_nv
- Reported Region
- usa_nv
- Ticker
- GMET
Geometry
- Grade
- 4.13
- Grade Unit
- ppm
- Intercept
- 91.95 m
- From
- 102.5 m
- To
- 194.45 m
- Hole Depth
- 205.27 m
- Intercept Depth
- 68.6 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- TP26-046:102.5-194.45
Location
- Location
- Schofield
- Easting
- 621225
- Northing
- 4165537
- CRS
- NAD83/ UTM Zone 11N Datum
- Azimuth
- 260 °
- Dip
- -50 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- MSA Labs and ALS Laboratories
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Compositing
- Cutoff Grade
- 0.04
- Cutoff Unit
- % WO3
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-21T00:00:00.000Z
Reasoning: This broad intercept shows trace silver mineralization, providing additional polymetallic context.
Positive factors
- QA/QC disclosed
Negative factors
- Apparent width only
Evidence · table
“4.13”
Context: 91.95
Tags used in scoring
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
Rejected tags
Rejected tags — excluded from scoring because their label or evidence could not be verified.
QA/QC DisclosedRejected · positive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Reason: The release mentions MSA Labs and ALS Laboratories as certified labs and details QA/QC procedures including standards, duplicates, and blanks.
Evidence · text
“MSA Labs (MSA) of Elko, Nevada which is an ISO9001 and ISO/IEC 17025 accredited laboratory. ... ALS Laboratories of Reno, Nevada. ... Guardian Metal’s QA/QC program includes regular insertion of standards, duplicates and blanks into the sample stream”
Apparent Width OnlyRejected · negative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Reason: The document explicitly states that true thicknesses are not yet known for any reported intercepts.
Evidence · text
“Note: True thicknesses of all intercepts reported herein are not yet known.”
Cut-off DisclosedRejected · positive · Story-specific tag
Cut-off grade used for resource reporting is clearly stated, enabling like-for-like comparison.
Reason: The notes for the Phase II table explicitly state the cut-off grade used for reporting intercepts.
Evidence · text
“Only material intercepts of at least 5m apparent width at a cut-off grade of >/=0.04% WO 3 are included.”
TP26-046Tempiute · copperGrade: 0.049Grade Unit: %Intercept: 91.95 mView all detailsHide details
Identity
- Hole ID
- TP26-046
- Project
- Tempiute
- Commodity
- copper
- Region
- usa_nv
- Reported Region
- usa_nv
- Ticker
- GMET
Geometry
- Grade
- 0.049
- Grade Unit
- %
- Intercept
- 91.95 m
- From
- 102.5 m
- To
- 194.45 m
- Hole Depth
- 205.27 m
- Intercept Depth
- 68.6 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- TP26-046:102.5-194.45
Location
- Location
- Schofield
- Easting
- 621225
- Northing
- 4165537
- CRS
- NAD83/ UTM Zone 11N Datum
- Azimuth
- 260 °
- Dip
- -50 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- MSA Labs and ALS Laboratories
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Compositing
- Cutoff Grade
- 0.04
- Cutoff Unit
- % WO3
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-21T00:00:00.000Z
Reasoning: This broad intercept shows trace copper mineralization, providing additional polymetallic context.
Positive factors
- QA/QC disclosed
Negative factors
- Apparent width only
Evidence · table
“0.049”
Context: 91.95
Tags used in scoring
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
Rejected tags
Rejected tags — excluded from scoring because their label or evidence could not be verified.
QA/QC DisclosedRejected · positive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Reason: The release mentions MSA Labs and ALS Laboratories as certified labs and details QA/QC procedures including standards, duplicates, and blanks.
Evidence · text
“MSA Labs (MSA) of Elko, Nevada which is an ISO9001 and ISO/IEC 17025 accredited laboratory. ... ALS Laboratories of Reno, Nevada. ... Guardian Metal’s QA/QC program includes regular insertion of standards, duplicates and blanks into the sample stream”
Apparent Width OnlyRejected · negative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Reason: The document explicitly states that true thicknesses are not yet known for any reported intercepts.
Evidence · text
“Note: True thicknesses of all intercepts reported herein are not yet known.”
Cut-off DisclosedRejected · positive · Story-specific tag
Cut-off grade used for resource reporting is clearly stated, enabling like-for-like comparison.
Reason: The notes for the Phase II table explicitly state the cut-off grade used for reporting intercepts.
Evidence · text
“Only material intercepts of at least 5m apparent width at a cut-off grade of >/=0.04% WO 3 are included.”
TP26-046Tempiute · tungstenGrade: 0.33Grade Unit: %Intercept: 16.4 mView all detailsHide details
Identity
- Hole ID
- TP26-046
- Project
- Tempiute
- Commodity
- tungsten
- Region
- usa_nv
- Reported Region
- usa_nv
- Ticker
- GMET
Geometry
- Grade
- 0.33
- Grade Unit
- %
- Intercept
- 16.4 m
- From
- 111.6 m
- To
- 128 m
- Hole Depth
- 205.27 m
- Intercept Depth
- 68.6 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- TP26-046:111.6-128
Location
- Location
- Schofield
- Easting
- 621225
- Northing
- 4165537
- CRS
- NAD83/ UTM Zone 11N Datum
- Azimuth
- 260 °
- Dip
- -50 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- MSA Labs and ALS Laboratories
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Compositing
- Cutoff Grade
- 0.04
- Cutoff Unit
- % WO3
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-21T00:00:00.000Z
Reasoning: This sub-interval shows strong tungsten mineralization within the broader intercept, indicating a concentrated zone.
Positive factors
- Strong tungsten grade
- QA/QC disclosed
Negative factors
- Apparent width only
Evidence · table
“0.33”
Context: 16.40
Rejected tags
Rejected tags — excluded from scoring because their label or evidence could not be verified.
QA/QC DisclosedRejected · positive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Reason: The release mentions MSA Labs and ALS Laboratories as certified labs and details QA/QC procedures including standards, duplicates, and blanks.
Evidence · text
“MSA Labs (MSA) of Elko, Nevada which is an ISO9001 and ISO/IEC 17025 accredited laboratory. ... ALS Laboratories of Reno, Nevada. ... Guardian Metal’s QA/QC program includes regular insertion of standards, duplicates and blanks into the sample stream”
Apparent Width OnlyRejected · negative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Reason: The document explicitly states that true thicknesses are not yet known for any reported intercepts.
Evidence · text
“Note: True thicknesses of all intercepts reported herein are not yet known.”
Cut-off DisclosedRejected · positive · Story-specific tag
Cut-off grade used for resource reporting is clearly stated, enabling like-for-like comparison.
Reason: The notes for the Phase II table explicitly state the cut-off grade used for reporting intercepts.
Evidence · text
“Only material intercepts of at least 5m apparent width at a cut-off grade of >/=0.04% WO 3 are included.”
Infill DrillingRejected · neutral
Confirmatory drilling to raise resource confidence, not new discovery.
Reason: This hole is part of the Phase II program, which is described as resource drilling designed to test continuity and support a Mineral Resource estimate.
Evidence · text
“The ongoing Phase II resource drilling program is planned to include approximately 46 diamond drillholes, of which 28 have been completed to date. The program is designed to test the continuity, thickness and grade of mineralization around and beyond the historical underground workings, and to generate the data needed to support the potential definition of an initial Mineral Resource estimate at Tempiute.”
TP26-046Tempiute · zincGrade: 0.34Grade Unit: %Intercept: 16.4 mView all detailsHide details
Identity
- Hole ID
- TP26-046
- Project
- Tempiute
- Commodity
- zinc
- Region
- usa_nv
- Reported Region
- usa_nv
- Ticker
- GMET
Geometry
- Grade
- 0.34
- Grade Unit
- %
- Intercept
- 16.4 m
- From
- 111.6 m
- To
- 128 m
- Hole Depth
- 205.27 m
- Intercept Depth
- 68.6 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- TP26-046:111.6-128
Location
- Location
- Schofield
- Easting
- 621225
- Northing
- 4165537
- CRS
- NAD83/ UTM Zone 11N Datum
- Azimuth
- 260 °
- Dip
- -50 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- MSA Labs and ALS Laboratories
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Compositing
- Cutoff Grade
- 0.04
- Cutoff Unit
- % WO3
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-21T00:00:00.000Z
Reasoning: This sub-interval shows a moderate zinc grade, adding to the polymetallic potential.
Positive factors
- QA/QC disclosed
Negative factors
- Apparent width only
Evidence · table
“0.34”
Context: 16.40
Tags used in scoring
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
Rejected tags
Rejected tags — excluded from scoring because their label or evidence could not be verified.
QA/QC DisclosedRejected · positive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Reason: The release mentions MSA Labs and ALS Laboratories as certified labs and details QA/QC procedures including standards, duplicates, and blanks.
Evidence · text
“MSA Labs (MSA) of Elko, Nevada which is an ISO9001 and ISO/IEC 17025 accredited laboratory. ... ALS Laboratories of Reno, Nevada. ... Guardian Metal’s QA/QC program includes regular insertion of standards, duplicates and blanks into the sample stream”
Apparent Width OnlyRejected · negative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Reason: The document explicitly states that true thicknesses are not yet known for any reported intercepts.
Evidence · text
“Note: True thicknesses of all intercepts reported herein are not yet known.”
Cut-off DisclosedRejected · positive · Story-specific tag
Cut-off grade used for resource reporting is clearly stated, enabling like-for-like comparison.
Reason: The notes for the Phase II table explicitly state the cut-off grade used for reporting intercepts.
Evidence · text
“Only material intercepts of at least 5m apparent width at a cut-off grade of >/=0.04% WO 3 are included.”
TP26-046Tempiute · silverGrade: 1.11Grade Unit: ppmIntercept: 16.4 mView all detailsHide details
Identity
- Hole ID
- TP26-046
- Project
- Tempiute
- Commodity
- silver
- Region
- usa_nv
- Reported Region
- usa_nv
- Ticker
- GMET
Geometry
- Grade
- 1.11
- Grade Unit
- ppm
- Intercept
- 16.4 m
- From
- 111.6 m
- To
- 128 m
- Hole Depth
- 205.27 m
- Intercept Depth
- 68.6 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- TP26-046:111.6-128
Location
- Location
- Schofield
- Easting
- 621225
- Northing
- 4165537
- CRS
- NAD83/ UTM Zone 11N Datum
- Azimuth
- 260 °
- Dip
- -50 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- MSA Labs and ALS Laboratories
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Compositing
- Cutoff Grade
- 0.04
- Cutoff Unit
- % WO3
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-21T00:00:00.000Z
Reasoning: This sub-interval shows trace silver mineralization, providing additional polymetallic context.
Positive factors
- QA/QC disclosed
Negative factors
- Apparent width only
Evidence · table
“1.11”
Context: 16.40
Tags used in scoring
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
Rejected tags
Rejected tags — excluded from scoring because their label or evidence could not be verified.
QA/QC DisclosedRejected · positive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Reason: The release mentions MSA Labs and ALS Laboratories as certified labs and details QA/QC procedures including standards, duplicates, and blanks.
Evidence · text
“MSA Labs (MSA) of Elko, Nevada which is an ISO9001 and ISO/IEC 17025 accredited laboratory. ... ALS Laboratories of Reno, Nevada. ... Guardian Metal’s QA/QC program includes regular insertion of standards, duplicates and blanks into the sample stream”
Apparent Width OnlyRejected · negative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Reason: The document explicitly states that true thicknesses are not yet known for any reported intercepts.
Evidence · text
“Note: True thicknesses of all intercepts reported herein are not yet known.”
Cut-off DisclosedRejected · positive · Story-specific tag
Cut-off grade used for resource reporting is clearly stated, enabling like-for-like comparison.
Reason: The notes for the Phase II table explicitly state the cut-off grade used for reporting intercepts.
Evidence · text
“Only material intercepts of at least 5m apparent width at a cut-off grade of >/=0.04% WO 3 are included.”
TP26-046Tempiute · copperGrade: 0.054Grade Unit: %Intercept: 16.4 mView all detailsHide details
Identity
- Hole ID
- TP26-046
- Project
- Tempiute
- Commodity
- copper
- Region
- usa_nv
- Reported Region
- usa_nv
- Ticker
- GMET
Geometry
- Grade
- 0.054
- Grade Unit
- %
- Intercept
- 16.4 m
- From
- 111.6 m
- To
- 128 m
- Hole Depth
- 205.27 m
- Intercept Depth
- 68.6 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- TP26-046:111.6-128
Location
- Location
- Schofield
- Easting
- 621225
- Northing
- 4165537
- CRS
- NAD83/ UTM Zone 11N Datum
- Azimuth
- 260 °
- Dip
- -50 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- MSA Labs and ALS Laboratories
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Compositing
- Cutoff Grade
- 0.04
- Cutoff Unit
- % WO3
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-21T00:00:00.000Z
Reasoning: This sub-interval shows trace copper mineralization, providing additional polymetallic context.
Positive factors
- QA/QC disclosed
Negative factors
- Apparent width only
Evidence · table
“0.054”
Context: 16.40
Tags used in scoring
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
Rejected tags
Rejected tags — excluded from scoring because their label or evidence could not be verified.
QA/QC DisclosedRejected · positive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Reason: The release mentions MSA Labs and ALS Laboratories as certified labs and details QA/QC procedures including standards, duplicates, and blanks.
Evidence · text
“MSA Labs (MSA) of Elko, Nevada which is an ISO9001 and ISO/IEC 17025 accredited laboratory. ... ALS Laboratories of Reno, Nevada. ... Guardian Metal’s QA/QC program includes regular insertion of standards, duplicates and blanks into the sample stream”
Apparent Width OnlyRejected · negative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Reason: The document explicitly states that true thicknesses are not yet known for any reported intercepts.
Evidence · text
“Note: True thicknesses of all intercepts reported herein are not yet known.”
Cut-off DisclosedRejected · positive · Story-specific tag
Cut-off grade used for resource reporting is clearly stated, enabling like-for-like comparison.
Reason: The notes for the Phase II table explicitly state the cut-off grade used for reporting intercepts.
Evidence · text
“Only material intercepts of at least 5m apparent width at a cut-off grade of >/=0.04% WO 3 are included.”
TP26-046Tempiute · tungstenGrade: 0.53Grade Unit: %Intercept: 12.7 mView all detailsHide details
Identity
- Hole ID
- TP26-046
- Project
- Tempiute
- Commodity
- tungsten
- Region
- usa_nv
- Reported Region
- usa_nv
- Ticker
- GMET
Geometry
- Grade
- 0.53
- Grade Unit
- %
- Intercept
- 12.7 m
- From
- 170.5 m
- To
- 183.2 m
- Hole Depth
- 205.27 m
- Intercept Depth
- 68.6 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- TP26-046:170.5-183.2
Location
- Location
- Schofield
- Easting
- 621225
- Northing
- 4165537
- CRS
- NAD83/ UTM Zone 11N Datum
- Azimuth
- 260 °
- Dip
- -50 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- MSA Labs and ALS Laboratories
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Compositing
- Cutoff Grade
- 0.04
- Cutoff Unit
- % WO3
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-21T00:00:00.000Z
Reasoning: This sub-interval shows exceptional tungsten mineralization over a good width, indicating a high-grade zone within the broader intercept.
Positive factors
- Exceptional tungsten grade
- Good intercept length
- QA/QC disclosed
Negative factors
- Apparent width only
Evidence · table
“0.53”
Context: 12.70
Rejected tags
Rejected tags — excluded from scoring because their label or evidence could not be verified.
Bonanza InterceptRejected · positive
Exceptionally high-grade zone, well above the deposit-type norm.
Reason: The tungsten grade of 0.53% WO3 exceeds the exceptional threshold of 0.5% WO3 for tungsten.
Evidence · table
“0.53”
Context: 12.70
QA/QC DisclosedRejected · positive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Reason: The release mentions MSA Labs and ALS Laboratories as certified labs and details QA/QC procedures including standards, duplicates, and blanks.
Evidence · text
“MSA Labs (MSA) of Elko, Nevada which is an ISO9001 and ISO/IEC 17025 accredited laboratory. ... ALS Laboratories of Reno, Nevada. ... Guardian Metal’s QA/QC program includes regular insertion of standards, duplicates and blanks into the sample stream”
Apparent Width OnlyRejected · negative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Reason: The document explicitly states that true thicknesses are not yet known for any reported intercepts.
Evidence · text
“Note: True thicknesses of all intercepts reported herein are not yet known.”
Cut-off DisclosedRejected · positive · Story-specific tag
Cut-off grade used for resource reporting is clearly stated, enabling like-for-like comparison.
Reason: The notes for the Phase II table explicitly state the cut-off grade used for reporting intercepts.
Evidence · text
“Only material intercepts of at least 5m apparent width at a cut-off grade of >/=0.04% WO 3 are included.”
Infill DrillingRejected · neutral
Confirmatory drilling to raise resource confidence, not new discovery.
Reason: This hole is part of the Phase II program, which is described as resource drilling designed to test continuity and support a Mineral Resource estimate.
Evidence · text
“The ongoing Phase II resource drilling program is planned to include approximately 46 diamond drillholes, of which 28 have been completed to date. The program is designed to test the continuity, thickness and grade of mineralization around and beyond the historical underground workings, and to generate the data needed to support the potential definition of an initial Mineral Resource estimate at Tempiute.”
TP26-046Tempiute · zincGrade: 0.11Grade Unit: %Intercept: 12.7 mView all detailsHide details
Identity
- Hole ID
- TP26-046
- Project
- Tempiute
- Commodity
- zinc
- Region
- usa_nv
- Reported Region
- usa_nv
- Ticker
- GMET
Geometry
- Grade
- 0.11
- Grade Unit
- %
- Intercept
- 12.7 m
- From
- 170.5 m
- To
- 183.2 m
- Hole Depth
- 205.27 m
- Intercept Depth
- 68.6 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- TP26-046:170.5-183.2
Location
- Location
- Schofield
- Easting
- 621225
- Northing
- 4165537
- CRS
- NAD83/ UTM Zone 11N Datum
- Azimuth
- 260 °
- Dip
- -50 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- MSA Labs and ALS Laboratories
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Compositing
- Cutoff Grade
- 0.04
- Cutoff Unit
- % WO3
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-21T00:00:00.000Z
Reasoning: This sub-interval shows a moderate zinc grade, adding to the polymetallic potential.
Positive factors
- QA/QC disclosed
Negative factors
- Apparent width only
Evidence · table
“0.11”
Context: 12.70
Tags used in scoring
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
Rejected tags
Rejected tags — excluded from scoring because their label or evidence could not be verified.
QA/QC DisclosedRejected · positive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Reason: The release mentions MSA Labs and ALS Laboratories as certified labs and details QA/QC procedures including standards, duplicates, and blanks.
Evidence · text
“MSA Labs (MSA) of Elko, Nevada which is an ISO9001 and ISO/IEC 17025 accredited laboratory. ... ALS Laboratories of Reno, Nevada. ... Guardian Metal’s QA/QC program includes regular insertion of standards, duplicates and blanks into the sample stream”
Apparent Width OnlyRejected · negative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Reason: The document explicitly states that true thicknesses are not yet known for any reported intercepts.
Evidence · text
“Note: True thicknesses of all intercepts reported herein are not yet known.”
Cut-off DisclosedRejected · positive · Story-specific tag
Cut-off grade used for resource reporting is clearly stated, enabling like-for-like comparison.
Reason: The notes for the Phase II table explicitly state the cut-off grade used for reporting intercepts.
Evidence · text
“Only material intercepts of at least 5m apparent width at a cut-off grade of >/=0.04% WO 3 are included.”
TP26-046Tempiute · silverGrade: 0.61Grade Unit: ppmIntercept: 12.7 mView all detailsHide details
Identity
- Hole ID
- TP26-046
- Project
- Tempiute
- Commodity
- silver
- Region
- usa_nv
- Reported Region
- usa_nv
- Ticker
- GMET
Geometry
- Grade
- 0.61
- Grade Unit
- ppm
- Intercept
- 12.7 m
- From
- 170.5 m
- To
- 183.2 m
- Hole Depth
- 205.27 m
- Intercept Depth
- 68.6 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- TP26-046:170.5-183.2
Location
- Location
- Schofield
- Easting
- 621225
- Northing
- 4165537
- CRS
- NAD83/ UTM Zone 11N Datum
- Azimuth
- 260 °
- Dip
- -50 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- MSA Labs and ALS Laboratories
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Compositing
- Cutoff Grade
- 0.04
- Cutoff Unit
- % WO3
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-21T00:00:00.000Z
Reasoning: This sub-interval shows trace silver mineralization, providing additional polymetallic context.
Positive factors
- QA/QC disclosed
Negative factors
- Apparent width only
Evidence · table
“0.61”
Context: 12.70
Tags used in scoring
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
Rejected tags
Rejected tags — excluded from scoring because their label or evidence could not be verified.
QA/QC DisclosedRejected · positive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Reason: The release mentions MSA Labs and ALS Laboratories as certified labs and details QA/QC procedures including standards, duplicates, and blanks.
Evidence · text
“MSA Labs (MSA) of Elko, Nevada which is an ISO9001 and ISO/IEC 17025 accredited laboratory. ... ALS Laboratories of Reno, Nevada. ... Guardian Metal’s QA/QC program includes regular insertion of standards, duplicates and blanks into the sample stream”
Apparent Width OnlyRejected · negative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Reason: The document explicitly states that true thicknesses are not yet known for any reported intercepts.
Evidence · text
“Note: True thicknesses of all intercepts reported herein are not yet known.”
Cut-off DisclosedRejected · positive · Story-specific tag
Cut-off grade used for resource reporting is clearly stated, enabling like-for-like comparison.
Reason: The notes for the Phase II table explicitly state the cut-off grade used for reporting intercepts.
Evidence · text
“Only material intercepts of at least 5m apparent width at a cut-off grade of >/=0.04% WO 3 are included.”
TP26-046Tempiute · copperGrade: 0.013Grade Unit: %Intercept: 12.7 mView all detailsHide details
Identity
- Hole ID
- TP26-046
- Project
- Tempiute
- Commodity
- copper
- Region
- usa_nv
- Reported Region
- usa_nv
- Ticker
- GMET
Geometry
- Grade
- 0.013
- Grade Unit
- %
- Intercept
- 12.7 m
- From
- 170.5 m
- To
- 183.2 m
- Hole Depth
- 205.27 m
- Intercept Depth
- 68.6 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- TP26-046:170.5-183.2
Location
- Location
- Schofield
- Easting
- 621225
- Northing
- 4165537
- CRS
- NAD83/ UTM Zone 11N Datum
- Azimuth
- 260 °
- Dip
- -50 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- MSA Labs and ALS Laboratories
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Compositing
- Cutoff Grade
- 0.04
- Cutoff Unit
- % WO3
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-21T00:00:00.000Z
Reasoning: This sub-interval shows trace copper mineralization, providing additional polymetallic context.
Positive factors
- QA/QC disclosed
Negative factors
- Apparent width only
Evidence · table
“0.013”
Context: 12.70
Tags used in scoring
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
Rejected tags
Rejected tags — excluded from scoring because their label or evidence could not be verified.
QA/QC DisclosedRejected · positive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Reason: The release mentions MSA Labs and ALS Laboratories as certified labs and details QA/QC procedures including standards, duplicates, and blanks.
Evidence · text
“MSA Labs (MSA) of Elko, Nevada which is an ISO9001 and ISO/IEC 17025 accredited laboratory. ... ALS Laboratories of Reno, Nevada. ... Guardian Metal’s QA/QC program includes regular insertion of standards, duplicates and blanks into the sample stream”
Apparent Width OnlyRejected · negative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Reason: The document explicitly states that true thicknesses are not yet known for any reported intercepts.
Evidence · text
“Note: True thicknesses of all intercepts reported herein are not yet known.”
Cut-off DisclosedRejected · positive · Story-specific tag
Cut-off grade used for resource reporting is clearly stated, enabling like-for-like comparison.
Reason: The notes for the Phase II table explicitly state the cut-off grade used for reporting intercepts.
Evidence · text
“Only material intercepts of at least 5m apparent width at a cut-off grade of >/=0.04% WO 3 are included.”
TP26-046Tempiute · tungstenGrade: 0.49Grade Unit: %Intercept: 5.14 mView all detailsHide details
Identity
- Hole ID
- TP26-046
- Project
- Tempiute
- Commodity
- tungsten
- Region
- usa_nv
- Reported Region
- usa_nv
- Ticker
- GMET
Geometry
- Grade
- 0.49
- Grade Unit
- %
- Intercept
- 5.14 m
- From
- 188.36 m
- To
- 193.5 m
- Hole Depth
- 205.27 m
- Intercept Depth
- 68.6 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- TP26-046:188.36-193.5
Location
- Location
- Schofield
- Easting
- 621225
- Northing
- 4165537
- CRS
- NAD83/ UTM Zone 11N Datum
- Azimuth
- 260 °
- Dip
- -50 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- MSA Labs and ALS Laboratories
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Compositing
- Cutoff Grade
- 0.04
- Cutoff Unit
- % WO3
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-21T00:00:00.000Z
Reasoning: This sub-interval shows very strong tungsten mineralization over a moderate width, indicating a high-grade zone within the broader intercept.
Positive factors
- Strong tungsten grade (near exceptional)
- QA/QC disclosed
Negative factors
- Apparent width only
Evidence · table
“0.49”
Context: 5.14
Rejected tags
Rejected tags — excluded from scoring because their label or evidence could not be verified.
QA/QC DisclosedRejected · positive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Reason: The release mentions MSA Labs and ALS Laboratories as certified labs and details QA/QC procedures including standards, duplicates, and blanks.
Evidence · text
“MSA Labs (MSA) of Elko, Nevada which is an ISO9001 and ISO/IEC 17025 accredited laboratory. ... ALS Laboratories of Reno, Nevada. ... Guardian Metal’s QA/QC program includes regular insertion of standards, duplicates and blanks into the sample stream”
Apparent Width OnlyRejected · negative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Reason: The document explicitly states that true thicknesses are not yet known for any reported intercepts.
Evidence · text
“Note: True thicknesses of all intercepts reported herein are not yet known.”
Cut-off DisclosedRejected · positive · Story-specific tag
Cut-off grade used for resource reporting is clearly stated, enabling like-for-like comparison.
Reason: The notes for the Phase II table explicitly state the cut-off grade used for reporting intercepts.
Evidence · text
“Only material intercepts of at least 5m apparent width at a cut-off grade of >/=0.04% WO 3 are included.”
Infill DrillingRejected · neutral
Confirmatory drilling to raise resource confidence, not new discovery.
Reason: This hole is part of the Phase II program, which is described as resource drilling designed to test continuity and support a Mineral Resource estimate.
Evidence · text
“The ongoing Phase II resource drilling program is planned to include approximately 46 diamond drillholes, of which 28 have been completed to date. The program is designed to test the continuity, thickness and grade of mineralization around and beyond the historical underground workings, and to generate the data needed to support the potential definition of an initial Mineral Resource estimate at Tempiute.”
TP26-046Tempiute · zincGrade: 0.19Grade Unit: %Intercept: 5.14 mView all detailsHide details
Identity
- Hole ID
- TP26-046
- Project
- Tempiute
- Commodity
- zinc
- Region
- usa_nv
- Reported Region
- usa_nv
- Ticker
- GMET
Geometry
- Grade
- 0.19
- Grade Unit
- %
- Intercept
- 5.14 m
- From
- 188.36 m
- To
- 193.5 m
- Hole Depth
- 205.27 m
- Intercept Depth
- 68.6 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- TP26-046:188.36-193.5
Location
- Location
- Schofield
- Easting
- 621225
- Northing
- 4165537
- CRS
- NAD83/ UTM Zone 11N Datum
- Azimuth
- 260 °
- Dip
- -50 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- MSA Labs and ALS Laboratories
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Compositing
- Cutoff Grade
- 0.04
- Cutoff Unit
- % WO3
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-21T00:00:00.000Z
Reasoning: This sub-interval shows a moderate zinc grade, adding to the polymetallic potential.
Positive factors
- QA/QC disclosed
Negative factors
- Apparent width only
Evidence · table
“0.19”
Context: 5.14
Tags used in scoring
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
Rejected tags
Rejected tags — excluded from scoring because their label or evidence could not be verified.
QA/QC DisclosedRejected · positive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Reason: The release mentions MSA Labs and ALS Laboratories as certified labs and details QA/QC procedures including standards, duplicates, and blanks.
Evidence · text
“MSA Labs (MSA) of Elko, Nevada which is an ISO9001 and ISO/IEC 17025 accredited laboratory. ... ALS Laboratories of Reno, Nevada. ... Guardian Metal’s QA/QC program includes regular insertion of standards, duplicates and blanks into the sample stream”
Apparent Width OnlyRejected · negative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Reason: The document explicitly states that true thicknesses are not yet known for any reported intercepts.
Evidence · text
“Note: True thicknesses of all intercepts reported herein are not yet known.”
Cut-off DisclosedRejected · positive · Story-specific tag
Cut-off grade used for resource reporting is clearly stated, enabling like-for-like comparison.
Reason: The notes for the Phase II table explicitly state the cut-off grade used for reporting intercepts.
Evidence · text
“Only material intercepts of at least 5m apparent width at a cut-off grade of >/=0.04% WO 3 are included.”
TP26-046Tempiute · silverGrade: 18.83Grade Unit: ppmIntercept: 5.14 mView all detailsHide details
Identity
- Hole ID
- TP26-046
- Project
- Tempiute
- Commodity
- silver
- Region
- usa_nv
- Reported Region
- usa_nv
- Ticker
- GMET
Geometry
- Grade
- 18.83
- Grade Unit
- ppm
- Intercept
- 5.14 m
- From
- 188.36 m
- To
- 193.5 m
- Hole Depth
- 205.27 m
- Intercept Depth
- 68.6 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- TP26-046:188.36-193.5
Location
- Location
- Schofield
- Easting
- 621225
- Northing
- 4165537
- CRS
- NAD83/ UTM Zone 11N Datum
- Azimuth
- 260 °
- Dip
- -50 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- MSA Labs and ALS Laboratories
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Compositing
- Cutoff Grade
- 0.04
- Cutoff Unit
- % WO3
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-21T00:00:00.000Z
Reasoning: This sub-interval shows moderate silver mineralization, providing additional polymetallic context.
Positive factors
- QA/QC disclosed
Negative factors
- Apparent width only
Evidence · table
“18.83”
Context: 5.14
Tags used in scoring
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
Rejected tags
Rejected tags — excluded from scoring because their label or evidence could not be verified.
QA/QC DisclosedRejected · positive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Reason: The release mentions MSA Labs and ALS Laboratories as certified labs and details QA/QC procedures including standards, duplicates, and blanks.
Evidence · text
“MSA Labs (MSA) of Elko, Nevada which is an ISO9001 and ISO/IEC 17025 accredited laboratory. ... ALS Laboratories of Reno, Nevada. ... Guardian Metal’s QA/QC program includes regular insertion of standards, duplicates and blanks into the sample stream”
Apparent Width OnlyRejected · negative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Reason: The document explicitly states that true thicknesses are not yet known for any reported intercepts.
Evidence · text
“Note: True thicknesses of all intercepts reported herein are not yet known.”
Cut-off DisclosedRejected · positive · Story-specific tag
Cut-off grade used for resource reporting is clearly stated, enabling like-for-like comparison.
Reason: The notes for the Phase II table explicitly state the cut-off grade used for reporting intercepts.
Evidence · text
“Only material intercepts of at least 5m apparent width at a cut-off grade of >/=0.04% WO 3 are included.”
TP26-046Tempiute · copperGrade: 0.06Grade Unit: %Intercept: 5.14 mView all detailsHide details
Identity
- Hole ID
- TP26-046
- Project
- Tempiute
- Commodity
- copper
- Region
- usa_nv
- Reported Region
- usa_nv
- Ticker
- GMET
Geometry
- Grade
- 0.06
- Grade Unit
- %
- Intercept
- 5.14 m
- From
- 188.36 m
- To
- 193.5 m
- Hole Depth
- 205.27 m
- Intercept Depth
- 68.6 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- TP26-046:188.36-193.5
Location
- Location
- Schofield
- Easting
- 621225
- Northing
- 4165537
- CRS
- NAD83/ UTM Zone 11N Datum
- Azimuth
- 260 °
- Dip
- -50 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- MSA Labs and ALS Laboratories
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Compositing
- Cutoff Grade
- 0.04
- Cutoff Unit
- % WO3
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-21T00:00:00.000Z
Reasoning: This sub-interval shows trace copper mineralization, providing additional polymetallic context.
Positive factors
- QA/QC disclosed
Negative factors
- Apparent width only
Evidence · table
“0.060”
Context: 5.14
Tags used in scoring
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
Rejected tags
Rejected tags — excluded from scoring because their label or evidence could not be verified.
QA/QC DisclosedRejected · positive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Reason: The release mentions MSA Labs and ALS Laboratories as certified labs and details QA/QC procedures including standards, duplicates, and blanks.
Evidence · text
“MSA Labs (MSA) of Elko, Nevada which is an ISO9001 and ISO/IEC 17025 accredited laboratory. ... ALS Laboratories of Reno, Nevada. ... Guardian Metal’s QA/QC program includes regular insertion of standards, duplicates and blanks into the sample stream”
Apparent Width OnlyRejected · negative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Reason: The document explicitly states that true thicknesses are not yet known for any reported intercepts.
Evidence · text
“Note: True thicknesses of all intercepts reported herein are not yet known.”
Cut-off DisclosedRejected · positive · Story-specific tag
Cut-off grade used for resource reporting is clearly stated, enabling like-for-like comparison.
Reason: The notes for the Phase II table explicitly state the cut-off grade used for reporting intercepts.
Evidence · text
“Only material intercepts of at least 5m apparent width at a cut-off grade of >/=0.04% WO 3 are included.”
TP25-001Tempiute · tungstenGrade: 0.32Grade Unit: %Intercept: 2.77 mView all detailsHide details
Identity
- Hole ID
- TP25-001
- Project
- Tempiute
- Commodity
- tungsten
- Region
- usa_nv
- Reported Region
- usa_nv
- Ticker
- GMET
Geometry
- Grade
- 0.32
- Grade Unit
- %
- Intercept
- 2.77 m
- From
- 91 m
- To
- 93.77 m
- Hole Depth
- 105.77 m
- Intercept Depth
- 91 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- TP25-001:91-93.77
Location
- Location
- Dead-Eye
- Easting
- 620632
- Northing
- 4167854
- CRS
- NAD83/ UTM Zone 11N Datum
- Azimuth
- 64 °
- Dip
- -45 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- MSA Labs and ALS Laboratories
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Compositing
- Cutoff Grade
- 0.1
- Cutoff Unit
- % WO3
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-21T00:00:00.000Z
Reasoning: This intercept shows strong tungsten mineralization, contributing to the regional exploration program.
Positive factors
- Strong tungsten grade
- QA/QC disclosed
Negative factors
- Narrow intercept length
- Apparent width only
Evidence · table
“0.32”
Context: 2.77
Rejected tags
Rejected tags — excluded from scoring because their label or evidence could not be verified.
QA/QC DisclosedRejected · positive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Reason: The release mentions MSA Labs and ALS Laboratories as certified labs and details QA/QC procedures including standards, duplicates, and blanks.
Evidence · text
“MSA Labs (MSA) of Elko, Nevada which is an ISO9001 and ISO/IEC 17025 accredited laboratory. ... ALS Laboratories of Reno, Nevada. ... Guardian Metal’s QA/QC program includes regular insertion of standards, duplicates and blanks into the sample stream”
Apparent Width OnlyRejected · negative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Reason: The document explicitly states that true thicknesses are not yet known for any reported intercepts.
Evidence · text
“Note: True thicknesses of all intercepts reported herein are not yet known.”
Cut-off DisclosedRejected · positive · Story-specific tag
Cut-off grade used for resource reporting is clearly stated, enabling like-for-like comparison.
Reason: The notes for the Phase I table explicitly state the cut-off grade used for reporting intercepts.
Evidence · text
“Only material intercepts of at least 2m apparent width at a cut-off grade of >/=0.1% WO 3 are included.”
Step-Out ExtensionRejected · positive
Mineralization extended beyond the previously known limit.
Reason: This hole is part of the Phase I regional exploration program, which aims to confirm tungsten-rich zones beyond the historical mine footprint.
Evidence · text
“The Phase I exploration drilling program comprised 41 diamond drillholes across regional target zones and confirmed that multiple tungsten-rich zones exist beyond the historical mine footprint.”
TP25-001Tempiute · zincGrade: 0.31Grade Unit: %Intercept: 2.77 mView all detailsHide details
Identity
- Hole ID
- TP25-001
- Project
- Tempiute
- Commodity
- zinc
- Region
- usa_nv
- Reported Region
- usa_nv
- Ticker
- GMET
Geometry
- Grade
- 0.31
- Grade Unit
- %
- Intercept
- 2.77 m
- From
- 91 m
- To
- 93.77 m
- Hole Depth
- 105.77 m
- Intercept Depth
- 91 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- TP25-001:91-93.77
Location
- Location
- Dead-Eye
- Easting
- 620632
- Northing
- 4167854
- CRS
- NAD83/ UTM Zone 11N Datum
- Azimuth
- 64 °
- Dip
- -45 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- MSA Labs and ALS Laboratories
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Compositing
- Cutoff Grade
- 0.1
- Cutoff Unit
- % WO3
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-21T00:00:00.000Z
Reasoning: This intercept shows a moderate zinc grade, providing additional polymetallic context to the tungsten mineralization.
Positive factors
- QA/QC disclosed
Negative factors
- Narrow intercept length
- Apparent width only
Evidence · table
“0.31”
Context: 2.77
Rejected tags
Rejected tags — excluded from scoring because their label or evidence could not be verified.
QA/QC DisclosedRejected · positive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Reason: The release mentions MSA Labs and ALS Laboratories as certified labs and details QA/QC procedures including standards, duplicates, and blanks.
Evidence · text
“MSA Labs (MSA) of Elko, Nevada which is an ISO9001 and ISO/IEC 17025 accredited laboratory. ... ALS Laboratories of Reno, Nevada. ... Guardian Metal’s QA/QC program includes regular insertion of standards, duplicates and blanks into the sample stream”
Apparent Width OnlyRejected · negative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Reason: The document explicitly states that true thicknesses are not yet known for any reported intercepts.
Evidence · text
“Note: True thicknesses of all intercepts reported herein are not yet known.”
Cut-off DisclosedRejected · positive · Story-specific tag
Cut-off grade used for resource reporting is clearly stated, enabling like-for-like comparison.
Reason: The notes for the Phase I table explicitly state the cut-off grade used for reporting intercepts.
Evidence · text
“Only material intercepts of at least 2m apparent width at a cut-off grade of >/=0.1% WO 3 are included.”
Step-Out ExtensionRejected · positive
Mineralization extended beyond the previously known limit.
Reason: This hole is part of the Phase I regional exploration program, which aims to confirm tungsten-rich zones beyond the historical mine footprint.
Evidence · text
“The Phase I exploration drilling program comprised 41 diamond drillholes across regional target zones and confirmed that multiple tungsten-rich zones exist beyond the historical mine footprint.”
TP25-001Tempiute · silverGrade: 2.3Grade Unit: ppmIntercept: 2.77 mView all detailsHide details
Identity
- Hole ID
- TP25-001
- Project
- Tempiute
- Commodity
- silver
- Region
- usa_nv
- Reported Region
- usa_nv
- Ticker
- GMET
Geometry
- Grade
- 2.3
- Grade Unit
- ppm
- Intercept
- 2.77 m
- From
- 91 m
- To
- 93.77 m
- Hole Depth
- 105.77 m
- Intercept Depth
- 91 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- TP25-001:91-93.77
Location
- Location
- Dead-Eye
- Easting
- 620632
- Northing
- 4167854
- CRS
- NAD83/ UTM Zone 11N Datum
- Azimuth
- 64 °
- Dip
- -45 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- MSA Labs and ALS Laboratories
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Compositing
- Cutoff Grade
- 0.1
- Cutoff Unit
- % WO3
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-21T00:00:00.000Z
Reasoning: This intercept shows trace silver mineralization, providing additional polymetallic context.
Positive factors
- QA/QC disclosed
Negative factors
- Narrow intercept length
- Apparent width only
Evidence · table
“2.30”
Context: 2.77
Rejected tags
Rejected tags — excluded from scoring because their label or evidence could not be verified.
QA/QC DisclosedRejected · positive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Reason: The release mentions MSA Labs and ALS Laboratories as certified labs and details QA/QC procedures including standards, duplicates, and blanks.
Evidence · text
“MSA Labs (MSA) of Elko, Nevada which is an ISO9001 and ISO/IEC 17025 accredited laboratory. ... ALS Laboratories of Reno, Nevada. ... Guardian Metal’s QA/QC program includes regular insertion of standards, duplicates and blanks into the sample stream”
Apparent Width OnlyRejected · negative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Reason: The document explicitly states that true thicknesses are not yet known for any reported intercepts.
Evidence · text
“Note: True thicknesses of all intercepts reported herein are not yet known.”
Cut-off DisclosedRejected · positive · Story-specific tag
Cut-off grade used for resource reporting is clearly stated, enabling like-for-like comparison.
Reason: The notes for the Phase I table explicitly state the cut-off grade used for reporting intercepts.
Evidence · text
“Only material intercepts of at least 2m apparent width at a cut-off grade of >/=0.1% WO 3 are included.”
Step-Out ExtensionRejected · positive
Mineralization extended beyond the previously known limit.
Reason: This hole is part of the Phase I regional exploration program, which aims to confirm tungsten-rich zones beyond the historical mine footprint.
Evidence · text
“The Phase I exploration drilling program comprised 41 diamond drillholes across regional target zones and confirmed that multiple tungsten-rich zones exist beyond the historical mine footprint.”
TP25-001Tempiute · copperGrade: 0.02Grade Unit: %Intercept: 2.77 mView all detailsHide details
Identity
- Hole ID
- TP25-001
- Project
- Tempiute
- Commodity
- copper
- Region
- usa_nv
- Reported Region
- usa_nv
- Ticker
- GMET
Geometry
- Grade
- 0.02
- Grade Unit
- %
- Intercept
- 2.77 m
- From
- 91 m
- To
- 93.77 m
- Hole Depth
- 105.77 m
- Intercept Depth
- 91 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- TP25-001:91-93.77
Location
- Location
- Dead-Eye
- Easting
- 620632
- Northing
- 4167854
- CRS
- NAD83/ UTM Zone 11N Datum
- Azimuth
- 64 °
- Dip
- -45 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- MSA Labs and ALS Laboratories
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Compositing
- Cutoff Grade
- 0.1
- Cutoff Unit
- % WO3
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-21T00:00:00.000Z
Reasoning: This intercept shows trace copper mineralization, providing additional polymetallic context.
Positive factors
- QA/QC disclosed
Negative factors
- Narrow intercept length
- Apparent width only
Evidence · table
“0.02”
Context: 2.77
Rejected tags
Rejected tags — excluded from scoring because their label or evidence could not be verified.
QA/QC DisclosedRejected · positive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Reason: The release mentions MSA Labs and ALS Laboratories as certified labs and details QA/QC procedures including standards, duplicates, and blanks.
Evidence · text
“MSA Labs (MSA) of Elko, Nevada which is an ISO9001 and ISO/IEC 17025 accredited laboratory. ... ALS Laboratories of Reno, Nevada. ... Guardian Metal’s QA/QC program includes regular insertion of standards, duplicates and blanks into the sample stream”
Apparent Width OnlyRejected · negative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Reason: The document explicitly states that true thicknesses are not yet known for any reported intercepts.
Evidence · text
“Note: True thicknesses of all intercepts reported herein are not yet known.”
Cut-off DisclosedRejected · positive · Story-specific tag
Cut-off grade used for resource reporting is clearly stated, enabling like-for-like comparison.
Reason: The notes for the Phase I table explicitly state the cut-off grade used for reporting intercepts.
Evidence · text
“Only material intercepts of at least 2m apparent width at a cut-off grade of >/=0.1% WO 3 are included.”
Step-Out ExtensionRejected · positive
Mineralization extended beyond the previously known limit.
Reason: This hole is part of the Phase I regional exploration program, which aims to confirm tungsten-rich zones beyond the historical mine footprint.
Evidence · text
“The Phase I exploration drilling program comprised 41 diamond drillholes across regional target zones and confirmed that multiple tungsten-rich zones exist beyond the historical mine footprint.”
TP25-003Tempiute · tungstenGrade: 0.15Grade Unit: %Intercept: 3.57 mView all detailsHide details
Identity
- Hole ID
- TP25-003
- Project
- Tempiute
- Commodity
- tungsten
- Region
- usa_nv
- Reported Region
- usa_nv
- Ticker
- GMET
Geometry
- Grade
- 0.15
- Grade Unit
- %
- Intercept
- 3.57 m
- From
- 28.85 m
- To
- 32.42 m
- Hole Depth
- 148.49 m
- Intercept Depth
- 28.85 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- TP25-003:28.85-32.42
Location
- Location
- Dead-Eye
- Easting
- 620818
- Northing
- 4167416
- CRS
- NAD83/ UTM Zone 11N Datum
- Azimuth
- 79 °
- Dip
- -45 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- MSA Labs and ALS Laboratories
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Compositing
- Cutoff Grade
- 0.1
- Cutoff Unit
- % WO3
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-21T00:00:00.000Z
Reasoning: This intercept shows moderate tungsten mineralization, contributing to the regional exploration program.
Positive factors
- Moderate tungsten grade
- QA/QC disclosed
Negative factors
- Narrow intercept length
- Apparent width only
Evidence · table
“0.15”
Context: 3.57
Rejected tags
Rejected tags — excluded from scoring because their label or evidence could not be verified.
QA/QC DisclosedRejected · positive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Reason: The release mentions MSA Labs and ALS Laboratories as certified labs and details QA/QC procedures including standards, duplicates, and blanks.
Evidence · text
“MSA Labs (MSA) of Elko, Nevada which is an ISO9001 and ISO/IEC 17025 accredited laboratory. ... ALS Laboratories of Reno, Nevada. ... Guardian Metal’s QA/QC program includes regular insertion of standards, duplicates and blanks into the sample stream”
Apparent Width OnlyRejected · negative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Reason: The document explicitly states that true thicknesses are not yet known for any reported intercepts.
Evidence · text
“Note: True thicknesses of all intercepts reported herein are not yet known.”
Cut-off DisclosedRejected · positive · Story-specific tag
Cut-off grade used for resource reporting is clearly stated, enabling like-for-like comparison.
Reason: The notes for the Phase I table explicitly state the cut-off grade used for reporting intercepts.
Evidence · text
“Only material intercepts of at least 2m apparent width at a cut-off grade of >/=0.1% WO 3 are included.”
Step-Out ExtensionRejected · positive
Mineralization extended beyond the previously known limit.
Reason: This hole is part of the Phase I regional exploration program, which aims to confirm tungsten-rich zones beyond the historical mine footprint.
Evidence · text
“The Phase I exploration drilling program comprised 41 diamond drillholes across regional target zones and confirmed that multiple tungsten-rich zones exist beyond the historical mine footprint.”
TP25-003Tempiute · zincGrade: 0.25Grade Unit: %Intercept: 3.57 mView all detailsHide details
Identity
- Hole ID
- TP25-003
- Project
- Tempiute
- Commodity
- zinc
- Region
- usa_nv
- Reported Region
- usa_nv
- Ticker
- GMET
Geometry
- Grade
- 0.25
- Grade Unit
- %
- Intercept
- 3.57 m
- From
- 28.85 m
- To
- 32.42 m
- Hole Depth
- 148.49 m
- Intercept Depth
- 28.85 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- TP25-003:28.85-32.42
Location
- Location
- Dead-Eye
- Easting
- 620818
- Northing
- 4167416
- CRS
- NAD83/ UTM Zone 11N Datum
- Azimuth
- 79 °
- Dip
- -45 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- MSA Labs and ALS Laboratories
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Compositing
- Cutoff Grade
- 0.1
- Cutoff Unit
- % WO3
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-21T00:00:00.000Z
Reasoning: This intercept shows a moderate zinc grade, providing additional polymetallic context to the tungsten mineralization.
Positive factors
- QA/QC disclosed
Negative factors
- Narrow intercept length
- Apparent width only
Evidence · table
“0.25”
Context: 3.57
Rejected tags
Rejected tags — excluded from scoring because their label or evidence could not be verified.
QA/QC DisclosedRejected · positive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Reason: The release mentions MSA Labs and ALS Laboratories as certified labs and details QA/QC procedures including standards, duplicates, and blanks.
Evidence · text
“MSA Labs (MSA) of Elko, Nevada which is an ISO9001 and ISO/IEC 17025 accredited laboratory. ... ALS Laboratories of Reno, Nevada. ... Guardian Metal’s QA/QC program includes regular insertion of standards, duplicates and blanks into the sample stream”
Apparent Width OnlyRejected · negative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Reason: The document explicitly states that true thicknesses are not yet known for any reported intercepts.
Evidence · text
“Note: True thicknesses of all intercepts reported herein are not yet known.”
Cut-off DisclosedRejected · positive · Story-specific tag
Cut-off grade used for resource reporting is clearly stated, enabling like-for-like comparison.
Reason: The notes for the Phase I table explicitly state the cut-off grade used for reporting intercepts.
Evidence · text
“Only material intercepts of at least 2m apparent width at a cut-off grade of >/=0.1% WO 3 are included.”
Step-Out ExtensionRejected · positive
Mineralization extended beyond the previously known limit.
Reason: This hole is part of the Phase I regional exploration program, which aims to confirm tungsten-rich zones beyond the historical mine footprint.
Evidence · text
“The Phase I exploration drilling program comprised 41 diamond drillholes across regional target zones and confirmed that multiple tungsten-rich zones exist beyond the historical mine footprint.”
TP25-003Tempiute · silverGrade: 0.86Grade Unit: ppmIntercept: 3.57 mView all detailsHide details
Identity
- Hole ID
- TP25-003
- Project
- Tempiute
- Commodity
- silver
- Region
- usa_nv
- Reported Region
- usa_nv
- Ticker
- GMET
Geometry
- Grade
- 0.86
- Grade Unit
- ppm
- Intercept
- 3.57 m
- From
- 28.85 m
- To
- 32.42 m
- Hole Depth
- 148.49 m
- Intercept Depth
- 28.85 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- TP25-003:28.85-32.42
Location
- Location
- Dead-Eye
- Easting
- 620818
- Northing
- 4167416
- CRS
- NAD83/ UTM Zone 11N Datum
- Azimuth
- 79 °
- Dip
- -45 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- MSA Labs and ALS Laboratories
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Compositing
- Cutoff Grade
- 0.1
- Cutoff Unit
- % WO3
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-21T00:00:00.000Z
Reasoning: This intercept shows trace silver mineralization, providing additional polymetallic context.
Positive factors
- QA/QC disclosed
Negative factors
- Narrow intercept length
- Apparent width only
Evidence · table
“0.86”
Context: 3.57
Rejected tags
Rejected tags — excluded from scoring because their label or evidence could not be verified.
QA/QC DisclosedRejected · positive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Reason: The release mentions MSA Labs and ALS Laboratories as certified labs and details QA/QC procedures including standards, duplicates, and blanks.
Evidence · text
“MSA Labs (MSA) of Elko, Nevada which is an ISO9001 and ISO/IEC 17025 accredited laboratory. ... ALS Laboratories of Reno, Nevada. ... Guardian Metal’s QA/QC program includes regular insertion of standards, duplicates and blanks into the sample stream”
Apparent Width OnlyRejected · negative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Reason: The document explicitly states that true thicknesses are not yet known for any reported intercepts.
Evidence · text
“Note: True thicknesses of all intercepts reported herein are not yet known.”
Cut-off DisclosedRejected · positive · Story-specific tag
Cut-off grade used for resource reporting is clearly stated, enabling like-for-like comparison.
Reason: The notes for the Phase I table explicitly state the cut-off grade used for reporting intercepts.
Evidence · text
“Only material intercepts of at least 2m apparent width at a cut-off grade of >/=0.1% WO 3 are included.”
Step-Out ExtensionRejected · positive
Mineralization extended beyond the previously known limit.
Reason: This hole is part of the Phase I regional exploration program, which aims to confirm tungsten-rich zones beyond the historical mine footprint.
Evidence · text
“The Phase I exploration drilling program comprised 41 diamond drillholes across regional target zones and confirmed that multiple tungsten-rich zones exist beyond the historical mine footprint.”
TP25-003Tempiute · copperGrade: 0Grade Unit: %Intercept: 3.57 mView all detailsHide details
Identity
- Hole ID
- TP25-003
- Project
- Tempiute
- Commodity
- copper
- Region
- usa_nv
- Reported Region
- usa_nv
- Ticker
- GMET
Geometry
- Grade
- 0
- Grade Unit
- %
- Intercept
- 3.57 m
- From
- 28.85 m
- To
- 32.42 m
- Hole Depth
- 148.49 m
- Intercept Depth
- 28.85 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- TP25-003:28.85-32.42
Location
- Location
- Dead-Eye
- Easting
- 620818
- Northing
- 4167416
- CRS
- NAD83/ UTM Zone 11N Datum
- Azimuth
- 79 °
- Dip
- -45 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- MSA Labs and ALS Laboratories
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Compositing
- Cutoff Grade
- 0.1
- Cutoff Unit
- % WO3
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-21T00:00:00.000Z
Reasoning: This intercept shows barren copper mineralization, providing additional polymetallic context.
Positive factors
- QA/QC disclosed
Negative factors
- Narrow intercept length
- Apparent width only
- Barren copper grade
Evidence · table
“0.00”
Context: 3.57
Rejected tags
Rejected tags — excluded from scoring because their label or evidence could not be verified.
QA/QC DisclosedRejected · positive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Reason: The release mentions MSA Labs and ALS Laboratories as certified labs and details QA/QC procedures including standards, duplicates, and blanks.
Evidence · text
“MSA Labs (MSA) of Elko, Nevada which is an ISO9001 and ISO/IEC 17025 accredited laboratory. ... ALS Laboratories of Reno, Nevada. ... Guardian Metal’s QA/QC program includes regular insertion of standards, duplicates and blanks into the sample stream”
Apparent Width OnlyRejected · negative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Reason: The document explicitly states that true thicknesses are not yet known for any reported intercepts.
Evidence · text
“Note: True thicknesses of all intercepts reported herein are not yet known.”
Cut-off DisclosedRejected · positive · Story-specific tag
Cut-off grade used for resource reporting is clearly stated, enabling like-for-like comparison.
Reason: The notes for the Phase I table explicitly state the cut-off grade used for reporting intercepts.
Evidence · text
“Only material intercepts of at least 2m apparent width at a cut-off grade of >/=0.1% WO 3 are included.”
Infill DrillingRejected · neutral
Confirmatory drilling to raise resource confidence, not new discovery.
Reason: This hole is part of the Phase II program, which is described as resource drilling designed to test continuity and support a Mineral Resource estimate.
Evidence · text
“The ongoing Phase II resource drilling program is planned to include approximately 46 diamond drillholes, of which 28 have been completed to date. The program is designed to test the continuity, thickness and grade of mineralization around and beyond the historical underground workings, and to generate the data needed to support the potential definition of an initial Mineral Resource estimate at Tempiute.”
TP25-003Tempiute · tungstenGrade: 0.26Grade Unit: %Intercept: 2.73 mView all detailsHide details
Identity
- Hole ID
- TP25-003
- Project
- Tempiute
- Commodity
- tungsten
- Region
- usa_nv
- Reported Region
- usa_nv
- Ticker
- GMET
Geometry
- Grade
- 0.26
- Grade Unit
- %
- Intercept
- 2.73 m
- From
- 99.92 m
- To
- 102.65 m
- Hole Depth
- 148.49 m
- Intercept Depth
- 28.85 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- TP25-003:99.92-102.65
Location
- Location
- Dead-Eye
- Easting
- 620818
- Northing
- 4167416
- CRS
- NAD83/ UTM Zone 11N Datum
- Azimuth
- 79 °
- Dip
- -45 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- MSA Labs and ALS Laboratories
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Compositing
- Cutoff Grade
- 0.1
- Cutoff Unit
- % WO3
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-21T00:00:00.000Z
Reasoning: This intercept shows strong tungsten mineralization, contributing to the regional exploration program.
Positive factors
- Strong tungsten grade
- QA/QC disclosed
Negative factors
- Narrow intercept length
- Apparent width only
Evidence · table
“0.26”
Context: 2.73
Rejected tags
Rejected tags — excluded from scoring because their label or evidence could not be verified.
QA/QC DisclosedRejected · positive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Reason: The release mentions MSA Labs and ALS Laboratories as certified labs and details QA/QC procedures including standards, duplicates, and blanks.
Evidence · text
“MSA Labs (MSA) of Elko, Nevada which is an ISO9001 and ISO/IEC 17025 accredited laboratory. ... ALS Laboratories of Reno, Nevada. ... Guardian Metal’s QA/QC program includes regular insertion of standards, duplicates and blanks into the sample stream”
Apparent Width OnlyRejected · negative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Reason: The document explicitly states that true thicknesses are not yet known for any reported intercepts.
Evidence · text
“Note: True thicknesses of all intercepts reported herein are not yet known.”
Cut-off DisclosedRejected · positive · Story-specific tag
Cut-off grade used for resource reporting is clearly stated, enabling like-for-like comparison.
Reason: The notes for the Phase I table explicitly state the cut-off grade used for reporting intercepts.
Evidence · text
“Only material intercepts of at least 2m apparent width at a cut-off grade of >/=0.1% WO 3 are included.”
Step-Out ExtensionRejected · positive
Mineralization extended beyond the previously known limit.
Reason: This hole is part of the Phase I regional exploration program, which aims to confirm tungsten-rich zones beyond the historical mine footprint.
Evidence · text
“The Phase I exploration drilling program comprised 41 diamond drillholes across regional target zones and confirmed that multiple tungsten-rich zones exist beyond the historical mine footprint.”
TP25-003Tempiute · zincGrade: 0.09Grade Unit: %Intercept: 2.73 mView all detailsHide details
Identity
- Hole ID
- TP25-003
- Project
- Tempiute
- Commodity
- zinc
- Region
- usa_nv
- Reported Region
- usa_nv
- Ticker
- GMET
Geometry
- Grade
- 0.09
- Grade Unit
- %
- Intercept
- 2.73 m
- From
- 99.92 m
- To
- 102.65 m
- Hole Depth
- 148.49 m
- Intercept Depth
- 28.85 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- TP25-003:99.92-102.65
Location
- Location
- Dead-Eye
- Easting
- 620818
- Northing
- 4167416
- CRS
- NAD83/ UTM Zone 11N Datum
- Azimuth
- 79 °
- Dip
- -45 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- MSA Labs and ALS Laboratories
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Compositing
- Cutoff Grade
- 0.1
- Cutoff Unit
- % WO3
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-21T00:00:00.000Z
Reasoning: This intercept shows trace zinc mineralization, providing additional polymetallic context to the tungsten mineralization.
Positive factors
- QA/QC disclosed
Negative factors
- Narrow intercept length
- Apparent width only
Evidence · table
“0.09”
Context: 2.73
Rejected tags
Rejected tags — excluded from scoring because their label or evidence could not be verified.
QA/QC DisclosedRejected · positive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Reason: The release mentions MSA Labs and ALS Laboratories as certified labs and details QA/QC procedures including standards, duplicates, and blanks.
Evidence · text
“MSA Labs (MSA) of Elko, Nevada which is an ISO9001 and ISO/IEC 17025 accredited laboratory. ... ALS Laboratories of Reno, Nevada. ... Guardian Metal’s QA/QC program includes regular insertion of standards, duplicates and blanks into the sample stream”
Apparent Width OnlyRejected · negative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Reason: The document explicitly states that true thicknesses are not yet known for any reported intercepts.
Evidence · text
“Note: True thicknesses of all intercepts reported herein are not yet known.”
Cut-off DisclosedRejected · positive · Story-specific tag
Cut-off grade used for resource reporting is clearly stated, enabling like-for-like comparison.
Reason: The notes for the Phase I table explicitly state the cut-off grade used for reporting intercepts.
Evidence · text
“Only material intercepts of at least 2m apparent width at a cut-off grade of >/=0.1% WO 3 are included.”
Step-Out ExtensionRejected · positive
Mineralization extended beyond the previously known limit.
Reason: This hole is part of the Phase I regional exploration program, which aims to confirm tungsten-rich zones beyond the historical mine footprint.
Evidence · text
“The Phase I exploration drilling program comprised 41 diamond drillholes across regional target zones and confirmed that multiple tungsten-rich zones exist beyond the historical mine footprint.”
TP25-003Tempiute · silverGrade: 0.82Grade Unit: ppmIntercept: 2.73 mView all detailsHide details
Identity
- Hole ID
- TP25-003
- Project
- Tempiute
- Commodity
- silver
- Region
- usa_nv
- Reported Region
- usa_nv
- Ticker
- GMET
Geometry
- Grade
- 0.82
- Grade Unit
- ppm
- Intercept
- 2.73 m
- From
- 99.92 m
- To
- 102.65 m
- Hole Depth
- 148.49 m
- Intercept Depth
- 28.85 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- TP25-003:99.92-102.65
Location
- Location
- Dead-Eye
- Easting
- 620818
- Northing
- 4167416
- CRS
- NAD83/ UTM Zone 11N Datum
- Azimuth
- 79 °
- Dip
- -45 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- MSA Labs and ALS Laboratories
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Compositing
- Cutoff Grade
- 0.1
- Cutoff Unit
- % WO3
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-21T00:00:00.000Z
Reasoning: This intercept shows trace silver mineralization, providing additional polymetallic context.
Positive factors
- QA/QC disclosed
Negative factors
- Narrow intercept length
- Apparent width only
Evidence · table
“0.82”
Context: 2.73
Rejected tags
Rejected tags — excluded from scoring because their label or evidence could not be verified.
QA/QC DisclosedRejected · positive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Reason: The release mentions MSA Labs and ALS Laboratories as certified labs and details QA/QC procedures including standards, duplicates, and blanks.
Evidence · text
“MSA Labs (MSA) of Elko, Nevada which is an ISO9001 and ISO/IEC 17025 accredited laboratory. ... ALS Laboratories of Reno, Nevada. ... Guardian Metal’s QA/QC program includes regular insertion of standards, duplicates and blanks into the sample stream”
Apparent Width OnlyRejected · negative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Reason: The document explicitly states that true thicknesses are not yet known for any reported intercepts.
Evidence · text
“Note: True thicknesses of all intercepts reported herein are not yet known.”
Cut-off DisclosedRejected · positive · Story-specific tag
Cut-off grade used for resource reporting is clearly stated, enabling like-for-like comparison.
Reason: The notes for the Phase I table explicitly state the cut-off grade used for reporting intercepts.
Evidence · text
“Only material intercepts of at least 2m apparent width at a cut-off grade of >/=0.1% WO 3 are included.”
Step-Out ExtensionRejected · positive
Mineralization extended beyond the previously known limit.
Reason: This hole is part of the Phase I regional exploration program, which aims to confirm tungsten-rich zones beyond the historical mine footprint.
Evidence · text
“The Phase I exploration drilling program comprised 41 diamond drillholes across regional target zones and confirmed that multiple tungsten-rich zones exist beyond the historical mine footprint.”
TP25-003Tempiute · copperGrade: 0Grade Unit: %Intercept: 2.73 mView all detailsHide details
Identity
- Hole ID
- TP25-003
- Project
- Tempiute
- Commodity
- copper
- Region
- usa_nv
- Reported Region
- usa_nv
- Ticker
- GMET
Geometry
- Grade
- 0
- Grade Unit
- %
- Intercept
- 2.73 m
- From
- 99.92 m
- To
- 102.65 m
- Hole Depth
- 148.49 m
- Intercept Depth
- 28.85 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- TP25-003:99.92-102.65
Location
- Location
- Dead-Eye
- Easting
- 620818
- Northing
- 4167416
- CRS
- NAD83/ UTM Zone 11N Datum
- Azimuth
- 79 °
- Dip
- -45 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- MSA Labs and ALS Laboratories
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Compositing
- Cutoff Grade
- 0.1
- Cutoff Unit
- % WO3
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-21T00:00:00.000Z
Reasoning: This intercept shows barren copper mineralization, providing additional polymetallic context.
Positive factors
- QA/QC disclosed
Negative factors
- Narrow intercept length
- Apparent width only
- Barren copper grade
Evidence · table
“0.00”
Context: 2.73
Rejected tags
Rejected tags — excluded from scoring because their label or evidence could not be verified.
QA/QC DisclosedRejected · positive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Reason: The release mentions MSA Labs and ALS Laboratories as certified labs and details QA/QC procedures including standards, duplicates, and blanks.
Evidence · text
“MSA Labs (MSA) of Elko, Nevada which is an ISO9001 and ISO/IEC 17025 accredited laboratory. ... ALS Laboratories of Reno, Nevada. ... Guardian Metal’s QA/QC program includes regular insertion of standards, duplicates and blanks into the sample stream”
Apparent Width OnlyRejected · negative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Reason: The document explicitly states that true thicknesses are not yet known for any reported intercepts.
Evidence · text
“Note: True thicknesses of all intercepts reported herein are not yet known.”
Cut-off DisclosedRejected · positive · Story-specific tag
Cut-off grade used for resource reporting is clearly stated, enabling like-for-like comparison.
Reason: The notes for the Phase I table explicitly state the cut-off grade used for reporting intercepts.
Evidence · text
“Only material intercepts of at least 2m apparent width at a cut-off grade of >/=0.1% WO 3 are included.”
Step-Out ExtensionRejected · positive
Mineralization extended beyond the previously known limit.
Reason: This hole is part of the Phase I regional exploration program, which aims to confirm tungsten-rich zones beyond the historical mine footprint.
Evidence · text
“The Phase I exploration drilling program comprised 41 diamond drillholes across regional target zones and confirmed that multiple tungsten-rich zones exist beyond the historical mine footprint.”
incl.Tempiute · zincGrade: 0.55Grade Unit: %Intercept: 6.94 mView all detailsHide details
Identity
- Hole ID
- incl.
- Project
- Tempiute
- Commodity
- zinc
- Region
- usa_nv
- Reported Region
- usa_nv
- Ticker
- GMET
Geometry
- Grade
- 0.55
- Grade Unit
- %
- Intercept
- 6.94 m
- From
- 211.91 m
- To
- 218.85 m
- Intercept Depth
- 211.91 m
Classification
- Sample Type
- drill
- Group ID
- incl.:211.91-218.85
Location
- CRS
- NAD83/ UTM Zone 11N
QA/QC
- QA/QC Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-21T00:00:00.000Z
Reasoning: Expanded from assay table. 0.55 % zinc is below against the default band [18, 10, 5, 2] %. Grade×width 3.8 %·m is below.
Negative factors
- 0.55 % zinc is below the weak threshold (2 %) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.55”
Context: incl.
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
incl.Tempiute · silverGrade: 3.98Grade Unit: ppmIntercept: 6.94 mView all detailsHide details
Identity
- Hole ID
- incl.
- Project
- Tempiute
- Commodity
- silver
- Region
- usa_nv
- Reported Region
- usa_nv
- Ticker
- GMET
Geometry
- Grade
- 3.98
- Grade Unit
- ppm
- Intercept
- 6.94 m
- From
- 211.91 m
- To
- 218.85 m
- Intercept Depth
- 211.91 m
Classification
- Sample Type
- drill
- Group ID
- incl.:211.91-218.85
Location
- CRS
- NAD83/ UTM Zone 11N
QA/QC
- QA/QC Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-21T00:00:00.000Z
Reasoning: Expanded from assay table: 3.98 ppm silver, reported in a unit the rubric does not cover (g/t).
Negative factors
- Grade unit ppm does not match the silver rubric unit g/t; not scored.
Evidence · table
“3.98”
Context: incl.
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
incl.Tempiute · copperGrade: 0.007Grade Unit: %Intercept: 6.94 mView all detailsHide details
Identity
- Hole ID
- incl.
- Project
- Tempiute
- Commodity
- copper
- Region
- usa_nv
- Reported Region
- usa_nv
- Ticker
- GMET
Geometry
- Grade
- 0.007
- Grade Unit
- %
- Intercept
- 6.94 m
- From
- 211.91 m
- To
- 218.85 m
- Intercept Depth
- 211.91 m
Classification
- Sample Type
- drill
- Group ID
- incl.:211.91-218.85
Location
- CRS
- NAD83/ UTM Zone 11N
QA/QC
- QA/QC Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-21T00:00:00.000Z
Reasoning: Expanded from assay table. 0.007 % copper is below against the default band [2.5, 1, 0.5, 0.25] %. Grade×width 0.0 %·m is below.
Negative factors
- 0.007 % copper is below the weak threshold (0.25 %) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.007”
Context: incl.
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
incl.Tempiute · zincGrade: 0.14Grade Unit: %Intercept: 13.18 mView all detailsHide details
Identity
- Hole ID
- incl.
- Project
- Tempiute
- Commodity
- zinc
- Region
- usa_nv
- Reported Region
- usa_nv
- Ticker
- GMET
Geometry
- Grade
- 0.14
- Grade Unit
- %
- Intercept
- 13.18 m
- From
- 175.14 m
- To
- 189.89 m
- Intercept Depth
- 175.14 m
Classification
- Sample Type
- drill
- Group ID
- incl.:175.14-189.89
Location
- CRS
- NAD83/ UTM Zone 11N
QA/QC
- QA/QC Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-21T00:00:00.000Z
Reasoning: Expanded from assay table. 0.14 % zinc is below against the default band [18, 10, 5, 2] %. Grade×width 1.8 %·m is below.
Negative factors
- 0.14 % zinc is below the weak threshold (2 %) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.14”
Context: incl.
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
incl.Tempiute · silverGrade: 1.25Grade Unit: ppmIntercept: 13.18 mView all detailsHide details
Identity
- Hole ID
- incl.
- Project
- Tempiute
- Commodity
- silver
- Region
- usa_nv
- Reported Region
- usa_nv
- Ticker
- GMET
Geometry
- Grade
- 1.25
- Grade Unit
- ppm
- Intercept
- 13.18 m
- From
- 175.14 m
- To
- 189.89 m
- Intercept Depth
- 175.14 m
Classification
- Sample Type
- drill
- Group ID
- incl.:175.14-189.89
Location
- CRS
- NAD83/ UTM Zone 11N
QA/QC
- QA/QC Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-21T00:00:00.000Z
Reasoning: Expanded from assay table: 1.25 ppm silver, reported in a unit the rubric does not cover (g/t).
Negative factors
- Grade unit ppm does not match the silver rubric unit g/t; not scored.
Evidence · table
“1.25”
Context: incl.
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
incl.Tempiute · copperGrade: 0.004Grade Unit: %Intercept: 13.18 mView all detailsHide details
Identity
- Hole ID
- incl.
- Project
- Tempiute
- Commodity
- copper
- Region
- usa_nv
- Reported Region
- usa_nv
- Ticker
- GMET
Geometry
- Grade
- 0.004
- Grade Unit
- %
- Intercept
- 13.18 m
- From
- 175.14 m
- To
- 189.89 m
- Intercept Depth
- 175.14 m
Classification
- Sample Type
- drill
- Group ID
- incl.:175.14-189.89
Location
- CRS
- NAD83/ UTM Zone 11N
QA/QC
- QA/QC Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-21T00:00:00.000Z
Reasoning: Expanded from assay table. 0.004 % copper is below against the default band [2.5, 1, 0.5, 0.25] %. Grade×width 0.1 %·m is below.
Negative factors
- 0.004 % copper is below the weak threshold (0.25 %) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.004”
Context: incl.
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
incl.Tempiute · zincGrade: 0.13Grade Unit: %Intercept: 10.45 mView all detailsHide details
Identity
- Hole ID
- incl.
- Project
- Tempiute
- Commodity
- zinc
- Region
- usa_nv
- Reported Region
- usa_nv
- Ticker
- GMET
Geometry
- Grade
- 0.13
- Grade Unit
- %
- Intercept
- 10.45 m
- From
- 70.1 m
- To
- 80.55 m
- Intercept Depth
- 70.1 m
Classification
- Sample Type
- drill
- Group ID
- incl.:70.1-80.55
Location
- CRS
- NAD83/ UTM Zone 11N
QA/QC
- QA/QC Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-21T00:00:00.000Z
Reasoning: Expanded from assay table. 0.13 % zinc is below against the default band [18, 10, 5, 2] %. Grade×width 1.4 %·m is below.
Negative factors
- 0.13 % zinc is below the weak threshold (2 %) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.13”
Context: incl.
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
incl.Tempiute · silverGrade: 1.42Grade Unit: ppmIntercept: 10.45 mView all detailsHide details
Identity
- Hole ID
- incl.
- Project
- Tempiute
- Commodity
- silver
- Region
- usa_nv
- Reported Region
- usa_nv
- Ticker
- GMET
Geometry
- Grade
- 1.42
- Grade Unit
- ppm
- Intercept
- 10.45 m
- From
- 70.1 m
- To
- 80.55 m
- Intercept Depth
- 70.1 m
Classification
- Sample Type
- drill
- Group ID
- incl.:70.1-80.55
Location
- CRS
- NAD83/ UTM Zone 11N
QA/QC
- QA/QC Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-21T00:00:00.000Z
Reasoning: Expanded from assay table: 1.42 ppm silver, reported in a unit the rubric does not cover (g/t).
Negative factors
- Grade unit ppm does not match the silver rubric unit g/t; not scored.
Evidence · table
“1.42”
Context: incl.
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
incl.Tempiute · copperGrade: 0.028Grade Unit: %Intercept: 10.45 mView all detailsHide details
Identity
- Hole ID
- incl.
- Project
- Tempiute
- Commodity
- copper
- Region
- usa_nv
- Reported Region
- usa_nv
- Ticker
- GMET
Geometry
- Grade
- 0.028
- Grade Unit
- %
- Intercept
- 10.45 m
- From
- 70.1 m
- To
- 80.55 m
- Intercept Depth
- 70.1 m
Classification
- Sample Type
- drill
- Group ID
- incl.:70.1-80.55
Location
- CRS
- NAD83/ UTM Zone 11N
QA/QC
- QA/QC Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-21T00:00:00.000Z
Reasoning: Expanded from assay table. 0.028 % copper is below against the default band [2.5, 1, 0.5, 0.25] %. Grade×width 0.3 %·m is below.
Negative factors
- 0.028 % copper is below the weak threshold (0.25 %) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.028”
Context: incl.
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
incl.Tempiute · zincGrade: 0.54Grade Unit: %Intercept: 5.86 mView all detailsHide details
Identity
- Hole ID
- incl.
- Project
- Tempiute
- Commodity
- zinc
- Region
- usa_nv
- Reported Region
- usa_nv
- Ticker
- GMET
Geometry
- Grade
- 0.54
- Grade Unit
- %
- Intercept
- 5.86 m
- From
- 85.94 m
- To
- 91.8 m
- Intercept Depth
- 85.94 m
Classification
- Sample Type
- drill
- Group ID
- incl.:85.94-91.8
Location
- CRS
- NAD83/ UTM Zone 11N
QA/QC
- QA/QC Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-21T00:00:00.000Z
Reasoning: Expanded from assay table. 0.54 % zinc is below against the default band [18, 10, 5, 2] %. Grade×width 3.2 %·m is below.
Negative factors
- 0.54 % zinc is below the weak threshold (2 %) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.54”
Context: incl.
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
incl.Tempiute · silverGrade: 0.47Grade Unit: ppmIntercept: 5.86 mView all detailsHide details
Identity
- Hole ID
- incl.
- Project
- Tempiute
- Commodity
- silver
- Region
- usa_nv
- Reported Region
- usa_nv
- Ticker
- GMET
Geometry
- Grade
- 0.47
- Grade Unit
- ppm
- Intercept
- 5.86 m
- From
- 85.94 m
- To
- 91.8 m
- Intercept Depth
- 85.94 m
Classification
- Sample Type
- drill
- Group ID
- incl.:85.94-91.8
Location
- CRS
- NAD83/ UTM Zone 11N
QA/QC
- QA/QC Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-21T00:00:00.000Z
Reasoning: Expanded from assay table: 0.47 ppm silver, reported in a unit the rubric does not cover (g/t).
Negative factors
- Grade unit ppm does not match the silver rubric unit g/t; not scored.
Evidence · table
“0.47”
Context: incl.
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
incl.Tempiute · copperGrade: 0.04Grade Unit: %Intercept: 5.86 mView all detailsHide details
Identity
- Hole ID
- incl.
- Project
- Tempiute
- Commodity
- copper
- Region
- usa_nv
- Reported Region
- usa_nv
- Ticker
- GMET
Geometry
- Grade
- 0.04
- Grade Unit
- %
- Intercept
- 5.86 m
- From
- 85.94 m
- To
- 91.8 m
- Intercept Depth
- 85.94 m
Classification
- Sample Type
- drill
- Group ID
- incl.:85.94-91.8
Location
- CRS
- NAD83/ UTM Zone 11N
QA/QC
- QA/QC Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-21T00:00:00.000Z
Reasoning: Expanded from assay table. 0.04 % copper is below against the default band [2.5, 1, 0.5, 0.25] %. Grade×width 0.2 %·m is below.
Negative factors
- 0.04 % copper is below the weak threshold (0.25 %) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.040”
Context: incl.
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
anddemonstrate the scale of the mineralizing · zincGrade: 0.79Grade Unit: %Intercept: 91.95 mView all detailsHide details
Identity
- Hole ID
- and
- Project
- demonstrate the scale of the mineralizing
- Commodity
- zinc
- Region
- usa_nv
- Reported Region
- usa_nv
- Ticker
- GMET
Geometry
- Grade
- 0.79
- Grade Unit
- %
- Intercept
- 91.95 m
- From
- 102.5 m
- To
- 194.45 m
- Intercept Depth
- 102.5 m
Classification
- Sample Type
- drill
- Group ID
- and:102.5-194.45
Location
- CRS
- NAD83/ UTM Zone 11N
QA/QC
- QA/QC Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-21T00:00:00.000Z
Reasoning: Expanded from assay table. 0.79 % zinc is moderate against the default band [18, 10, 5, 2] %. Grade×width 72.6 %·m is moderate (grade alone is below; the better of the two is used).
Negative factors
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.79”
Context: and
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
anddemonstrate the scale of the mineralizing · silverGrade: 4.13Grade Unit: ppmIntercept: 91.95 mView all detailsHide details
Identity
- Hole ID
- and
- Project
- demonstrate the scale of the mineralizing
- Commodity
- silver
- Region
- usa_nv
- Reported Region
- usa_nv
- Ticker
- GMET
Geometry
- Grade
- 4.13
- Grade Unit
- ppm
- Intercept
- 91.95 m
- From
- 102.5 m
- To
- 194.45 m
- Intercept Depth
- 102.5 m
Classification
- Sample Type
- drill
- Group ID
- and:102.5-194.45
Location
- CRS
- NAD83/ UTM Zone 11N
QA/QC
- QA/QC Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-21T00:00:00.000Z
Reasoning: Expanded from assay table: 4.13 ppm silver, reported in a unit the rubric does not cover (g/t).
Negative factors
- Grade unit ppm does not match the silver rubric unit g/t; not scored.
Evidence · table
“4.13”
Context: and
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
anddemonstrate the scale of the mineralizing · copperGrade: 0.049Grade Unit: %Intercept: 91.95 mView all detailsHide details
Identity
- Hole ID
- and
- Project
- demonstrate the scale of the mineralizing
- Commodity
- copper
- Region
- usa_nv
- Reported Region
- usa_nv
- Ticker
- GMET
Geometry
- Grade
- 0.049
- Grade Unit
- %
- Intercept
- 91.95 m
- From
- 102.5 m
- To
- 194.45 m
- Intercept Depth
- 102.5 m
Classification
- Sample Type
- drill
- Group ID
- and:102.5-194.45
Location
- CRS
- NAD83/ UTM Zone 11N
QA/QC
- QA/QC Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-21T00:00:00.000Z
Reasoning: Expanded from assay table. 0.049 % copper is below against the default band [2.5, 1, 0.5, 0.25] %. Grade×width 4.5 %·m is below.
Negative factors
- 0.049 % copper is below the weak threshold (0.25 %) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.049”
Context: and
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
incl.Tempiute · zincGrade: 0.34Grade Unit: %Intercept: 16.4 mView all detailsHide details
Identity
- Hole ID
- incl.
- Project
- Tempiute
- Commodity
- zinc
- Region
- usa_nv
- Reported Region
- usa_nv
- Ticker
- GMET
Geometry
- Grade
- 0.34
- Grade Unit
- %
- Intercept
- 16.4 m
- From
- 111.6 m
- To
- 128 m
- Intercept Depth
- 111.6 m
Classification
- Sample Type
- drill
- Group ID
- incl.:111.6-128
Location
- CRS
- NAD83/ UTM Zone 11N
QA/QC
- QA/QC Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-21T00:00:00.000Z
Reasoning: Expanded from assay table. 0.34 % zinc is below against the default band [18, 10, 5, 2] %. Grade×width 5.6 %·m is below.
Negative factors
- 0.34 % zinc is below the weak threshold (2 %) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.34”
Context: incl.
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
incl.Tempiute · silverGrade: 1.11Grade Unit: ppmIntercept: 16.4 mView all detailsHide details
Identity
- Hole ID
- incl.
- Project
- Tempiute
- Commodity
- silver
- Region
- usa_nv
- Reported Region
- usa_nv
- Ticker
- GMET
Geometry
- Grade
- 1.11
- Grade Unit
- ppm
- Intercept
- 16.4 m
- From
- 111.6 m
- To
- 128 m
- Intercept Depth
- 111.6 m
Classification
- Sample Type
- drill
- Group ID
- incl.:111.6-128
Location
- CRS
- NAD83/ UTM Zone 11N
QA/QC
- QA/QC Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-21T00:00:00.000Z
Reasoning: Expanded from assay table: 1.11 ppm silver, reported in a unit the rubric does not cover (g/t).
Negative factors
- Grade unit ppm does not match the silver rubric unit g/t; not scored.
Evidence · table
“1.11”
Context: incl.
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
incl.Tempiute · copperGrade: 0.054Grade Unit: %Intercept: 16.4 mView all detailsHide details
Identity
- Hole ID
- incl.
- Project
- Tempiute
- Commodity
- copper
- Region
- usa_nv
- Reported Region
- usa_nv
- Ticker
- GMET
Geometry
- Grade
- 0.054
- Grade Unit
- %
- Intercept
- 16.4 m
- From
- 111.6 m
- To
- 128 m
- Intercept Depth
- 111.6 m
Classification
- Sample Type
- drill
- Group ID
- incl.:111.6-128
Location
- CRS
- NAD83/ UTM Zone 11N
QA/QC
- QA/QC Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-21T00:00:00.000Z
Reasoning: Expanded from assay table. 0.054 % copper is below against the default band [2.5, 1, 0.5, 0.25] %. Grade×width 0.9 %·m is below.
Negative factors
- 0.054 % copper is below the weak threshold (0.25 %) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.054”
Context: incl.
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
incl.Tempiute · zincGrade: 0.11Grade Unit: %Intercept: 12.7 mView all detailsHide details
Identity
- Hole ID
- incl.
- Project
- Tempiute
- Commodity
- zinc
- Region
- usa_nv
- Reported Region
- usa_nv
- Ticker
- GMET
Geometry
- Grade
- 0.11
- Grade Unit
- %
- Intercept
- 12.7 m
- From
- 170.5 m
- To
- 183.2 m
- Intercept Depth
- 170.5 m
Classification
- Sample Type
- drill
- Group ID
- incl.:170.5-183.2
Location
- CRS
- NAD83/ UTM Zone 11N
QA/QC
- QA/QC Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-21T00:00:00.000Z
Reasoning: Expanded from assay table. 0.11 % zinc is below against the default band [18, 10, 5, 2] %. Grade×width 1.4 %·m is below.
Negative factors
- 0.11 % zinc is below the weak threshold (2 %) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.11”
Context: incl.
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
incl.Tempiute · silverGrade: 0.61Grade Unit: ppmIntercept: 12.7 mView all detailsHide details
Identity
- Hole ID
- incl.
- Project
- Tempiute
- Commodity
- silver
- Region
- usa_nv
- Reported Region
- usa_nv
- Ticker
- GMET
Geometry
- Grade
- 0.61
- Grade Unit
- ppm
- Intercept
- 12.7 m
- From
- 170.5 m
- To
- 183.2 m
- Intercept Depth
- 170.5 m
Classification
- Sample Type
- drill
- Group ID
- incl.:170.5-183.2
Location
- CRS
- NAD83/ UTM Zone 11N
QA/QC
- QA/QC Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-21T00:00:00.000Z
Reasoning: Expanded from assay table: 0.61 ppm silver, reported in a unit the rubric does not cover (g/t).
Negative factors
- Grade unit ppm does not match the silver rubric unit g/t; not scored.
Evidence · table
“0.61”
Context: incl.
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
incl.Tempiute · copperGrade: 0.013Grade Unit: %Intercept: 12.7 mView all detailsHide details
Identity
- Hole ID
- incl.
- Project
- Tempiute
- Commodity
- copper
- Region
- usa_nv
- Reported Region
- usa_nv
- Ticker
- GMET
Geometry
- Grade
- 0.013
- Grade Unit
- %
- Intercept
- 12.7 m
- From
- 170.5 m
- To
- 183.2 m
- Intercept Depth
- 170.5 m
Classification
- Sample Type
- drill
- Group ID
- incl.:170.5-183.2
Location
- CRS
- NAD83/ UTM Zone 11N
QA/QC
- QA/QC Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-21T00:00:00.000Z
Reasoning: Expanded from assay table. 0.013 % copper is below against the default band [2.5, 1, 0.5, 0.25] %. Grade×width 0.2 %·m is below.
Negative factors
- 0.013 % copper is below the weak threshold (0.25 %) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.013”
Context: incl.
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
incl.Tempiute · zincGrade: 0.19Grade Unit: %Intercept: 5.14 mView all detailsHide details
Identity
- Hole ID
- incl.
- Project
- Tempiute
- Commodity
- zinc
- Region
- usa_nv
- Reported Region
- usa_nv
- Ticker
- GMET
Geometry
- Grade
- 0.19
- Grade Unit
- %
- Intercept
- 5.14 m
- From
- 188.36 m
- To
- 193.5 m
- Intercept Depth
- 188.36 m
Classification
- Sample Type
- drill
- Group ID
- incl.:188.36-193.5
Location
- CRS
- NAD83/ UTM Zone 11N
QA/QC
- QA/QC Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-21T00:00:00.000Z
Reasoning: Expanded from assay table. 0.19 % zinc is below against the default band [18, 10, 5, 2] %. Grade×width 1.0 %·m is below.
Negative factors
- 0.19 % zinc is below the weak threshold (2 %) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.19”
Context: incl.
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
incl.Tempiute · silverGrade: 18.83Grade Unit: ppmIntercept: 5.14 mView all detailsHide details
Identity
- Hole ID
- incl.
- Project
- Tempiute
- Commodity
- silver
- Region
- usa_nv
- Reported Region
- usa_nv
- Ticker
- GMET
Geometry
- Grade
- 18.83
- Grade Unit
- ppm
- Intercept
- 5.14 m
- From
- 188.36 m
- To
- 193.5 m
- Intercept Depth
- 188.36 m
Classification
- Sample Type
- drill
- Group ID
- incl.:188.36-193.5
Location
- CRS
- NAD83/ UTM Zone 11N
QA/QC
- QA/QC Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-21T00:00:00.000Z
Reasoning: Expanded from assay table: 18.83 ppm silver, reported in a unit the rubric does not cover (g/t).
Negative factors
- Grade unit ppm does not match the silver rubric unit g/t; not scored.
Evidence · table
“18.83”
Context: incl.
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
incl.Tempiute · copperGrade: 0.06Grade Unit: %Intercept: 5.14 mView all detailsHide details
Identity
- Hole ID
- incl.
- Project
- Tempiute
- Commodity
- copper
- Region
- usa_nv
- Reported Region
- usa_nv
- Ticker
- GMET
Geometry
- Grade
- 0.06
- Grade Unit
- %
- Intercept
- 5.14 m
- From
- 188.36 m
- To
- 193.5 m
- Intercept Depth
- 188.36 m
Classification
- Sample Type
- drill
- Group ID
- incl.:188.36-193.5
Location
- CRS
- NAD83/ UTM Zone 11N
QA/QC
- QA/QC Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-21T00:00:00.000Z
Reasoning: Expanded from assay table. 0.06 % copper is below against the default band [2.5, 1, 0.5, 0.25] %. Grade×width 0.3 %·m is below.
Negative factors
- 0.06 % copper is below the weak threshold (0.25 %) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.060”
Context: incl.
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
anddemonstrate the scale of the mineralizing · zincGrade: 0.09Grade Unit: %Intercept: 2.73 mView all detailsHide details
Identity
- Hole ID
- and
- Project
- demonstrate the scale of the mineralizing
- Commodity
- zinc
- Region
- usa_nv
- Reported Region
- usa_nv
- Ticker
- GMET
Geometry
- Grade
- 0.09
- Grade Unit
- %
- Intercept
- 2.73 m
- From
- 99.92 m
- To
- 102.65 m
- Intercept Depth
- 99.92 m
Classification
- Sample Type
- drill
- Group ID
- and:99.92-102.65
Location
- CRS
- NAD83/ UTM Zone 11N
QA/QC
- QA/QC Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-21T00:00:00.000Z
Reasoning: Expanded from assay table. 0.09 % zinc is below against the default band [18, 10, 5, 2] %. Grade×width 0.2 %·m is below.
Negative factors
- 0.09 % zinc is below the weak threshold (2 %) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.09”
Context: and
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
anddemonstrate the scale of the mineralizing · silverGrade: 0.82Grade Unit: ppmIntercept: 2.73 mView all detailsHide details
Identity
- Hole ID
- and
- Project
- demonstrate the scale of the mineralizing
- Commodity
- silver
- Region
- usa_nv
- Reported Region
- usa_nv
- Ticker
- GMET
Geometry
- Grade
- 0.82
- Grade Unit
- ppm
- Intercept
- 2.73 m
- From
- 99.92 m
- To
- 102.65 m
- Intercept Depth
- 99.92 m
Classification
- Sample Type
- drill
- Group ID
- and:99.92-102.65
Location
- CRS
- NAD83/ UTM Zone 11N
QA/QC
- QA/QC Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-21T00:00:00.000Z
Reasoning: Expanded from assay table: 0.82 ppm silver, reported in a unit the rubric does not cover (g/t).
Negative factors
- Grade unit ppm does not match the silver rubric unit g/t; not scored.
Evidence · table
“0.82”
Context: and
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
anddemonstrate the scale of the mineralizing · copperGrade: 0Grade Unit: %Intercept: 2.73 mView all detailsHide details
Identity
- Hole ID
- and
- Project
- demonstrate the scale of the mineralizing
- Commodity
- copper
- Region
- usa_nv
- Reported Region
- usa_nv
- Ticker
- GMET
Geometry
- Grade
- 0
- Grade Unit
- %
- Intercept
- 2.73 m
- From
- 99.92 m
- To
- 102.65 m
- Intercept Depth
- 99.92 m
Classification
- Sample Type
- drill
- Group ID
- and:99.92-102.65
Location
- CRS
- NAD83/ UTM Zone 11N
QA/QC
- QA/QC Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-21T00:00:00.000Z
Reasoning: Expanded from assay table. 0 % copper is below against the default band [2.5, 1, 0.5, 0.25] %. Grade×width 0.0 %·m is below.
Negative factors
- 0 % copper is below the weak threshold (0.25 %) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.00”
Context: and
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
TP25-004Tempiute · zincGrade: 0.05Grade Unit: %Intercept: 2.93 mView all detailsHide details
Identity
- Hole ID
- TP25-004
- Project
- Tempiute
- Commodity
- zinc
- Region
- usa_nv
- Reported Region
- usa_nv
- Ticker
- GMET
Geometry
- Grade
- 0.05
- Grade Unit
- %
- Intercept
- 2.93 m
- From
- 122.47 m
- To
- 125.4 m
- Intercept Depth
- 122.47 m
Classification
- Sample Type
- drill
- Group ID
- TP25-004:122.47-125.4
Location
- CRS
- NAD83/ UTM Zone 11N
QA/QC
- QA/QC Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-21T00:00:00.000Z
Reasoning: Expanded from assay table. 0.05 % zinc is below against the default band [18, 10, 5, 2] %. Grade×width 0.1 %·m is below.
Negative factors
- 0.05 % zinc is below the weak threshold (2 %) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.05”
Context: TP25-004
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
TP25-004Tempiute · silverGrade: 0.25Grade Unit: ppmIntercept: 2.93 mView all detailsHide details
Identity
- Hole ID
- TP25-004
- Project
- Tempiute
- Commodity
- silver
- Region
- usa_nv
- Reported Region
- usa_nv
- Ticker
- GMET
Geometry
- Grade
- 0.25
- Grade Unit
- ppm
- Intercept
- 2.93 m
- From
- 122.47 m
- To
- 125.4 m
- Intercept Depth
- 122.47 m
Classification
- Sample Type
- drill
- Group ID
- TP25-004:122.47-125.4
Location
- CRS
- NAD83/ UTM Zone 11N
QA/QC
- QA/QC Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-21T00:00:00.000Z
Reasoning: Expanded from assay table: 0.25 ppm silver, reported in a unit the rubric does not cover (g/t).
Negative factors
- Grade unit ppm does not match the silver rubric unit g/t; not scored.
Evidence · table
“0.25”
Context: TP25-004
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
TP25-004Tempiute · copperGrade: 0Grade Unit: %Intercept: 2.93 mView all detailsHide details
Identity
- Hole ID
- TP25-004
- Project
- Tempiute
- Commodity
- copper
- Region
- usa_nv
- Reported Region
- usa_nv
- Ticker
- GMET
Geometry
- Grade
- 0
- Grade Unit
- %
- Intercept
- 2.93 m
- From
- 122.47 m
- To
- 125.4 m
- Intercept Depth
- 122.47 m
Classification
- Sample Type
- drill
- Group ID
- TP25-004:122.47-125.4
Location
- CRS
- NAD83/ UTM Zone 11N
QA/QC
- QA/QC Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-21T00:00:00.000Z
Reasoning: Expanded from assay table. 0 % copper is below against the default band [2.5, 1, 0.5, 0.25] %. Grade×width 0.0 %·m is below.
Negative factors
- 0 % copper is below the weak threshold (0.25 %) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.00”
Context: TP25-004
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
anddemonstrate the scale of the mineralizing · zincGrade: 0.46Grade Unit: %Intercept: 3.27 mView all detailsHide details
Identity
- Hole ID
- and
- Project
- demonstrate the scale of the mineralizing
- Commodity
- zinc
- Region
- usa_nv
- Reported Region
- usa_nv
- Ticker
- GMET
Geometry
- Grade
- 0.46
- Grade Unit
- %
- Intercept
- 3.27 m
- From
- 130.4 m
- To
- 133.67 m
- Intercept Depth
- 130.4 m
Classification
- Sample Type
- drill
- Group ID
- and:130.4-133.67
Location
- CRS
- NAD83/ UTM Zone 11N
QA/QC
- QA/QC Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-21T00:00:00.000Z
Reasoning: Expanded from assay table. 0.46 % zinc is below against the default band [18, 10, 5, 2] %. Grade×width 1.5 %·m is below.
Negative factors
- 0.46 % zinc is below the weak threshold (2 %) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.46”
Context: and
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
anddemonstrate the scale of the mineralizing · silverGrade: 20.38Grade Unit: ppmIntercept: 3.27 mView all detailsHide details
Identity
- Hole ID
- and
- Project
- demonstrate the scale of the mineralizing
- Commodity
- silver
- Region
- usa_nv
- Reported Region
- usa_nv
- Ticker
- GMET
Geometry
- Grade
- 20.38
- Grade Unit
- ppm
- Intercept
- 3.27 m
- From
- 130.4 m
- To
- 133.67 m
- Intercept Depth
- 130.4 m
Classification
- Sample Type
- drill
- Group ID
- and:130.4-133.67
Location
- CRS
- NAD83/ UTM Zone 11N
QA/QC
- QA/QC Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-21T00:00:00.000Z
Reasoning: Expanded from assay table: 20.38 ppm silver, reported in a unit the rubric does not cover (g/t).
Negative factors
- Grade unit ppm does not match the silver rubric unit g/t; not scored.
Evidence · table
“20.38”
Context: and
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
anddemonstrate the scale of the mineralizing · copperGrade: 0Grade Unit: %Intercept: 3.27 mView all detailsHide details
Identity
- Hole ID
- and
- Project
- demonstrate the scale of the mineralizing
- Commodity
- copper
- Region
- usa_nv
- Reported Region
- usa_nv
- Ticker
- GMET
Geometry
- Grade
- 0
- Grade Unit
- %
- Intercept
- 3.27 m
- From
- 130.4 m
- To
- 133.67 m
- Intercept Depth
- 130.4 m
Classification
- Sample Type
- drill
- Group ID
- and:130.4-133.67
Location
- CRS
- NAD83/ UTM Zone 11N
QA/QC
- QA/QC Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-21T00:00:00.000Z
Reasoning: Expanded from assay table. 0 % copper is below against the default band [2.5, 1, 0.5, 0.25] %. Grade×width 0.0 %·m is below.
Negative factors
- 0 % copper is below the weak threshold (0.25 %) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.00”
Context: and
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
anddemonstrate the scale of the mineralizing · zincGrade: 0.37Grade Unit: %Intercept: 4.31 mView all detailsHide details
Identity
- Hole ID
- and
- Project
- demonstrate the scale of the mineralizing
- Commodity
- zinc
- Region
- usa_nv
- Reported Region
- usa_nv
- Ticker
- GMET
Geometry
- Grade
- 0.37
- Grade Unit
- %
- Intercept
- 4.31 m
- From
- 144.21 m
- To
- 148.52 m
- Intercept Depth
- 144.21 m
Classification
- Sample Type
- drill
- Group ID
- and:144.21-148.52
Location
- CRS
- NAD83/ UTM Zone 11N
QA/QC
- QA/QC Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-21T00:00:00.000Z
Reasoning: Expanded from assay table. 0.37 % zinc is below against the default band [18, 10, 5, 2] %. Grade×width 1.6 %·m is below.
Negative factors
- 0.37 % zinc is below the weak threshold (2 %) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.37”
Context: and
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
anddemonstrate the scale of the mineralizing · silverGrade: 28.4Grade Unit: ppmIntercept: 4.31 mView all detailsHide details
Identity
- Hole ID
- and
- Project
- demonstrate the scale of the mineralizing
- Commodity
- silver
- Region
- usa_nv
- Reported Region
- usa_nv
- Ticker
- GMET
Geometry
- Grade
- 28.4
- Grade Unit
- ppm
- Intercept
- 4.31 m
- From
- 144.21 m
- To
- 148.52 m
- Intercept Depth
- 144.21 m
Classification
- Sample Type
- drill
- Group ID
- and:144.21-148.52
Location
- CRS
- NAD83/ UTM Zone 11N
QA/QC
- QA/QC Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-21T00:00:00.000Z
Reasoning: Expanded from assay table: 28.4 ppm silver, reported in a unit the rubric does not cover (g/t).
Negative factors
- Grade unit ppm does not match the silver rubric unit g/t; not scored.
Evidence · table
“28.40”
Context: and
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
anddemonstrate the scale of the mineralizing · copperGrade: 0.02Grade Unit: %Intercept: 4.31 mView all detailsHide details
Identity
- Hole ID
- and
- Project
- demonstrate the scale of the mineralizing
- Commodity
- copper
- Region
- usa_nv
- Reported Region
- usa_nv
- Ticker
- GMET
Geometry
- Grade
- 0.02
- Grade Unit
- %
- Intercept
- 4.31 m
- From
- 144.21 m
- To
- 148.52 m
- Intercept Depth
- 144.21 m
Classification
- Sample Type
- drill
- Group ID
- and:144.21-148.52
Location
- CRS
- NAD83/ UTM Zone 11N
QA/QC
- QA/QC Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-21T00:00:00.000Z
Reasoning: Expanded from assay table. 0.02 % copper is below against the default band [2.5, 1, 0.5, 0.25] %. Grade×width 0.1 %·m is below.
Negative factors
- 0.02 % copper is below the weak threshold (0.25 %) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.02”
Context: and
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
TP25-007Tempiute · zincGrade: 0.06Grade Unit: %Intercept: 2.4 mView all detailsHide details
Identity
- Hole ID
- TP25-007
- Project
- Tempiute
- Commodity
- zinc
- Region
- usa_nv
- Reported Region
- usa_nv
- Ticker
- GMET
Geometry
- Grade
- 0.06
- Grade Unit
- %
- Intercept
- 2.4 m
- From
- 23.2 m
- To
- 25.6 m
- Intercept Depth
- 23.2 m
Classification
- Sample Type
- drill
- Group ID
- TP25-007:23.2-25.6
Location
- CRS
- NAD83/ UTM Zone 11N
QA/QC
- QA/QC Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-21T00:00:00.000Z
Reasoning: Expanded from assay table. 0.06 % zinc is below against the default band [18, 10, 5, 2] %. Grade×width 0.1 %·m is below.
Negative factors
- 0.06 % zinc is below the weak threshold (2 %) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.06”
Context: TP25-007
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
TP25-007Tempiute · silverGrade: 3.16Grade Unit: ppmIntercept: 2.4 mView all detailsHide details
Identity
- Hole ID
- TP25-007
- Project
- Tempiute
- Commodity
- silver
- Region
- usa_nv
- Reported Region
- usa_nv
- Ticker
- GMET
Geometry
- Grade
- 3.16
- Grade Unit
- ppm
- Intercept
- 2.4 m
- From
- 23.2 m
- To
- 25.6 m
- Intercept Depth
- 23.2 m
Classification
- Sample Type
- drill
- Group ID
- TP25-007:23.2-25.6
Location
- CRS
- NAD83/ UTM Zone 11N
QA/QC
- QA/QC Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-21T00:00:00.000Z
Reasoning: Expanded from assay table: 3.16 ppm silver, reported in a unit the rubric does not cover (g/t).
Negative factors
- Grade unit ppm does not match the silver rubric unit g/t; not scored.
Evidence · table
“3.16”
Context: TP25-007
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
TP25-007Tempiute · copperGrade: 0Grade Unit: %Intercept: 2.4 mView all detailsHide details
Identity
- Hole ID
- TP25-007
- Project
- Tempiute
- Commodity
- copper
- Region
- usa_nv
- Reported Region
- usa_nv
- Ticker
- GMET
Geometry
- Grade
- 0
- Grade Unit
- %
- Intercept
- 2.4 m
- From
- 23.2 m
- To
- 25.6 m
- Intercept Depth
- 23.2 m
Classification
- Sample Type
- drill
- Group ID
- TP25-007:23.2-25.6
Location
- CRS
- NAD83/ UTM Zone 11N
QA/QC
- QA/QC Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-21T00:00:00.000Z
Reasoning: Expanded from assay table. 0 % copper is below against the default band [2.5, 1, 0.5, 0.25] %. Grade×width 0.0 %·m is below.
Negative factors
- 0 % copper is below the weak threshold (0.25 %) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.00”
Context: TP25-007
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
TP25-010Tempiute · zincGrade: 0.04Grade Unit: %Intercept: 3.1 mView all detailsHide details
Identity
- Hole ID
- TP25-010
- Project
- Tempiute
- Commodity
- zinc
- Region
- usa_nv
- Reported Region
- usa_nv
- Ticker
- GMET
Geometry
- Grade
- 0.04
- Grade Unit
- %
- Intercept
- 3.1 m
- From
- 28.1 m
- To
- 31.2 m
- Intercept Depth
- 28.1 m
Classification
- Sample Type
- drill
- Group ID
- TP25-010:28.1-31.2
Location
- CRS
- NAD83/ UTM Zone 11N
QA/QC
- QA/QC Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-21T00:00:00.000Z
Reasoning: Expanded from assay table. 0.04 % zinc is below against the default band [18, 10, 5, 2] %. Grade×width 0.1 %·m is below.
Negative factors
- 0.04 % zinc is below the weak threshold (2 %) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.04”
Context: TP25-010
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
TP25-010Tempiute · silverGrade: 0.03Grade Unit: ppmIntercept: 3.1 mView all detailsHide details
Identity
- Hole ID
- TP25-010
- Project
- Tempiute
- Commodity
- silver
- Region
- usa_nv
- Reported Region
- usa_nv
- Ticker
- GMET
Geometry
- Grade
- 0.03
- Grade Unit
- ppm
- Intercept
- 3.1 m
- From
- 28.1 m
- To
- 31.2 m
- Intercept Depth
- 28.1 m
Classification
- Sample Type
- drill
- Group ID
- TP25-010:28.1-31.2
Location
- CRS
- NAD83/ UTM Zone 11N
QA/QC
- QA/QC Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-21T00:00:00.000Z
Reasoning: Expanded from assay table: 0.03 ppm silver, reported in a unit the rubric does not cover (g/t).
Negative factors
- Grade unit ppm does not match the silver rubric unit g/t; not scored.
Evidence · table
“0.03”
Context: TP25-010
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
TP25-010Tempiute · copperGrade: 0Grade Unit: %Intercept: 3.1 mView all detailsHide details
Identity
- Hole ID
- TP25-010
- Project
- Tempiute
- Commodity
- copper
- Region
- usa_nv
- Reported Region
- usa_nv
- Ticker
- GMET
Geometry
- Grade
- 0
- Grade Unit
- %
- Intercept
- 3.1 m
- From
- 28.1 m
- To
- 31.2 m
- Intercept Depth
- 28.1 m
Classification
- Sample Type
- drill
- Group ID
- TP25-010:28.1-31.2
Location
- CRS
- NAD83/ UTM Zone 11N
QA/QC
- QA/QC Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-21T00:00:00.000Z
Reasoning: Expanded from assay table. 0 % copper is below against the default band [2.5, 1, 0.5, 0.25] %. Grade×width 0.0 %·m is below.
Negative factors
- 0 % copper is below the weak threshold (0.25 %) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.00”
Context: TP25-010
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
TP25-012Tempiute · zincGrade: 0.21Grade Unit: %Intercept: 3.74 mView all detailsHide details
Identity
- Hole ID
- TP25-012
- Project
- Tempiute
- Commodity
- zinc
- Region
- usa_nv
- Reported Region
- usa_nv
- Ticker
- GMET
Geometry
- Grade
- 0.21
- Grade Unit
- %
- Intercept
- 3.74 m
- From
- 107.46 m
- To
- 111.2 m
- Intercept Depth
- 107.46 m
Classification
- Sample Type
- drill
- Group ID
- TP25-012:107.46-111.2
Location
- CRS
- NAD83/ UTM Zone 11N
QA/QC
- QA/QC Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-21T00:00:00.000Z
Reasoning: Expanded from assay table. 0.21 % zinc is below against the default band [18, 10, 5, 2] %. Grade×width 0.8 %·m is below.
Negative factors
- 0.21 % zinc is below the weak threshold (2 %) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.21”
Context: TP25-012
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
TP25-012Tempiute · silverGrade: 5.12Grade Unit: ppmIntercept: 3.74 mView all detailsHide details
Identity
- Hole ID
- TP25-012
- Project
- Tempiute
- Commodity
- silver
- Region
- usa_nv
- Reported Region
- usa_nv
- Ticker
- GMET
Geometry
- Grade
- 5.12
- Grade Unit
- ppm
- Intercept
- 3.74 m
- From
- 107.46 m
- To
- 111.2 m
- Intercept Depth
- 107.46 m
Classification
- Sample Type
- drill
- Group ID
- TP25-012:107.46-111.2
Location
- CRS
- NAD83/ UTM Zone 11N
QA/QC
- QA/QC Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-21T00:00:00.000Z
Reasoning: Expanded from assay table: 5.12 ppm silver, reported in a unit the rubric does not cover (g/t).
Negative factors
- Grade unit ppm does not match the silver rubric unit g/t; not scored.
Evidence · table
“5.12”
Context: TP25-012
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
TP25-012Tempiute · copperGrade: 0.18Grade Unit: %Intercept: 3.74 mView all detailsHide details
Identity
- Hole ID
- TP25-012
- Project
- Tempiute
- Commodity
- copper
- Region
- usa_nv
- Reported Region
- usa_nv
- Ticker
- GMET
Geometry
- Grade
- 0.18
- Grade Unit
- %
- Intercept
- 3.74 m
- From
- 107.46 m
- To
- 111.2 m
- Intercept Depth
- 107.46 m
Classification
- Sample Type
- drill
- Group ID
- TP25-012:107.46-111.2
Location
- CRS
- NAD83/ UTM Zone 11N
QA/QC
- QA/QC Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-21T00:00:00.000Z
Reasoning: Expanded from assay table. 0.18 % copper is below against the default band [2.5, 1, 0.5, 0.25] %. Grade×width 0.7 %·m is below.
Negative factors
- 0.18 % copper is below the weak threshold (0.25 %) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.18”
Context: TP25-012
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
TP25-013Tempiute · zincGrade: 0.11Grade Unit: %Intercept: 2.4 mView all detailsHide details
Identity
- Hole ID
- TP25-013
- Project
- Tempiute
- Commodity
- zinc
- Region
- usa_nv
- Reported Region
- usa_nv
- Ticker
- GMET
Geometry
- Grade
- 0.11
- Grade Unit
- %
- Intercept
- 2.4 m
- From
- 69.19 m
- To
- 71.59 m
- Intercept Depth
- 69.19 m
Classification
- Sample Type
- drill
- Group ID
- TP25-013:69.19-71.59
Location
- CRS
- NAD83/ UTM Zone 11N
QA/QC
- QA/QC Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-21T00:00:00.000Z
Reasoning: Expanded from assay table. 0.11 % zinc is below against the default band [18, 10, 5, 2] %. Grade×width 0.3 %·m is below.
Negative factors
- 0.11 % zinc is below the weak threshold (2 %) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.11”
Context: TP25-013
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
TP25-013Tempiute · silverGrade: 0.5Grade Unit: ppmIntercept: 2.4 mView all detailsHide details
Identity
- Hole ID
- TP25-013
- Project
- Tempiute
- Commodity
- silver
- Region
- usa_nv
- Reported Region
- usa_nv
- Ticker
- GMET
Geometry
- Grade
- 0.5
- Grade Unit
- ppm
- Intercept
- 2.4 m
- From
- 69.19 m
- To
- 71.59 m
- Intercept Depth
- 69.19 m
Classification
- Sample Type
- drill
- Group ID
- TP25-013:69.19-71.59
Location
- CRS
- NAD83/ UTM Zone 11N
QA/QC
- QA/QC Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-21T00:00:00.000Z
Reasoning: Expanded from assay table: 0.5 ppm silver, reported in a unit the rubric does not cover (g/t).
Negative factors
- Grade unit ppm does not match the silver rubric unit g/t; not scored.
Evidence · table
“0.50”
Context: TP25-013
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
TP25-013Tempiute · copperGrade: 0Grade Unit: %Intercept: 2.4 mView all detailsHide details
Identity
- Hole ID
- TP25-013
- Project
- Tempiute
- Commodity
- copper
- Region
- usa_nv
- Reported Region
- usa_nv
- Ticker
- GMET
Geometry
- Grade
- 0
- Grade Unit
- %
- Intercept
- 2.4 m
- From
- 69.19 m
- To
- 71.59 m
- Intercept Depth
- 69.19 m
Classification
- Sample Type
- drill
- Group ID
- TP25-013:69.19-71.59
Location
- CRS
- NAD83/ UTM Zone 11N
QA/QC
- QA/QC Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-21T00:00:00.000Z
Reasoning: Expanded from assay table. 0 % copper is below against the default band [2.5, 1, 0.5, 0.25] %. Grade×width 0.0 %·m is below.
Negative factors
- 0 % copper is below the weak threshold (0.25 %) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.00”
Context: TP25-013
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
anddemonstrate the scale of the mineralizing · zincGrade: 0.58Grade Unit: %Intercept: 2.37 mView all detailsHide details
Identity
- Hole ID
- and
- Project
- demonstrate the scale of the mineralizing
- Commodity
- zinc
- Region
- usa_nv
- Reported Region
- usa_nv
- Ticker
- GMET
Geometry
- Grade
- 0.58
- Grade Unit
- %
- Intercept
- 2.37 m
- From
- 169.86 m
- To
- 172.23 m
- Intercept Depth
- 169.86 m
Classification
- Sample Type
- drill
- Group ID
- and:169.86-172.23
Location
- CRS
- NAD83/ UTM Zone 11N
QA/QC
- QA/QC Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-21T00:00:00.000Z
Reasoning: Expanded from assay table. 0.58 % zinc is below against the default band [18, 10, 5, 2] %. Grade×width 1.4 %·m is below.
Negative factors
- 0.58 % zinc is below the weak threshold (2 %) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.58”
Context: and
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
anddemonstrate the scale of the mineralizing · silverGrade: 3.91Grade Unit: ppmIntercept: 2.37 mView all detailsHide details
Identity
- Hole ID
- and
- Project
- demonstrate the scale of the mineralizing
- Commodity
- silver
- Region
- usa_nv
- Reported Region
- usa_nv
- Ticker
- GMET
Geometry
- Grade
- 3.91
- Grade Unit
- ppm
- Intercept
- 2.37 m
- From
- 169.86 m
- To
- 172.23 m
- Intercept Depth
- 169.86 m
Classification
- Sample Type
- drill
- Group ID
- and:169.86-172.23
Location
- CRS
- NAD83/ UTM Zone 11N
QA/QC
- QA/QC Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-21T00:00:00.000Z
Reasoning: Expanded from assay table: 3.91 ppm silver, reported in a unit the rubric does not cover (g/t).
Negative factors
- Grade unit ppm does not match the silver rubric unit g/t; not scored.
Evidence · table
“3.91”
Context: and
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
anddemonstrate the scale of the mineralizing · copperGrade: 0.01Grade Unit: %Intercept: 2.37 mView all detailsHide details
Identity
- Hole ID
- and
- Project
- demonstrate the scale of the mineralizing
- Commodity
- copper
- Region
- usa_nv
- Reported Region
- usa_nv
- Ticker
- GMET
Geometry
- Grade
- 0.01
- Grade Unit
- %
- Intercept
- 2.37 m
- From
- 169.86 m
- To
- 172.23 m
- Intercept Depth
- 169.86 m
Classification
- Sample Type
- drill
- Group ID
- and:169.86-172.23
Location
- CRS
- NAD83/ UTM Zone 11N
QA/QC
- QA/QC Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-21T00:00:00.000Z
Reasoning: Expanded from assay table. 0.01 % copper is below against the default band [2.5, 1, 0.5, 0.25] %. Grade×width 0.0 %·m is below.
Negative factors
- 0.01 % copper is below the weak threshold (0.25 %) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.01”
Context: and
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
TP25-014ATempiute · zincGrade: 0.04Grade Unit: %Intercept: 5.86 mView all detailsHide details
Identity
- Hole ID
- TP25-014A
- Project
- Tempiute
- Commodity
- zinc
- Region
- usa_nv
- Reported Region
- usa_nv
- Ticker
- GMET
Geometry
- Grade
- 0.04
- Grade Unit
- %
- Intercept
- 5.86 m
- From
- 96.86 m
- To
- 102.72 m
- Intercept Depth
- 96.86 m
Classification
- Sample Type
- drill
- Group ID
- TP25-014A:96.86-102.72
Location
- CRS
- NAD83/ UTM Zone 11N
QA/QC
- QA/QC Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-21T00:00:00.000Z
Reasoning: Expanded from assay table. 0.04 % zinc is below against the default band [18, 10, 5, 2] %. Grade×width 0.2 %·m is below.
Negative factors
- 0.04 % zinc is below the weak threshold (2 %) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.04”
Context: TP25-014A
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
TP25-014ATempiute · silverGrade: 0.5Grade Unit: ppmIntercept: 5.86 mView all detailsHide details
Identity
- Hole ID
- TP25-014A
- Project
- Tempiute
- Commodity
- silver
- Region
- usa_nv
- Reported Region
- usa_nv
- Ticker
- GMET
Geometry
- Grade
- 0.5
- Grade Unit
- ppm
- Intercept
- 5.86 m
- From
- 96.86 m
- To
- 102.72 m
- Intercept Depth
- 96.86 m
Classification
- Sample Type
- drill
- Group ID
- TP25-014A:96.86-102.72
Location
- CRS
- NAD83/ UTM Zone 11N
QA/QC
- QA/QC Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-21T00:00:00.000Z
Reasoning: Expanded from assay table: 0.5 ppm silver, reported in a unit the rubric does not cover (g/t).
Negative factors
- Grade unit ppm does not match the silver rubric unit g/t; not scored.
Evidence · table
“0.50”
Context: TP25-014A
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
TP25-014ATempiute · copperGrade: 0Grade Unit: %Intercept: 5.86 mView all detailsHide details
Identity
- Hole ID
- TP25-014A
- Project
- Tempiute
- Commodity
- copper
- Region
- usa_nv
- Reported Region
- usa_nv
- Ticker
- GMET
Geometry
- Grade
- 0
- Grade Unit
- %
- Intercept
- 5.86 m
- From
- 96.86 m
- To
- 102.72 m
- Intercept Depth
- 96.86 m
Classification
- Sample Type
- drill
- Group ID
- TP25-014A:96.86-102.72
Location
- CRS
- NAD83/ UTM Zone 11N
QA/QC
- QA/QC Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-21T00:00:00.000Z
Reasoning: Expanded from assay table. 0 % copper is below against the default band [2.5, 1, 0.5, 0.25] %. Grade×width 0.0 %·m is below.
Negative factors
- 0 % copper is below the weak threshold (0.25 %) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.00”
Context: TP25-014A
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
anddemonstrate the scale of the mineralizing · zincGrade: 0.14Grade Unit: %Intercept: 10.17 mView all detailsHide details
Identity
- Hole ID
- and
- Project
- demonstrate the scale of the mineralizing
- Commodity
- zinc
- Region
- usa_nv
- Reported Region
- usa_nv
- Ticker
- GMET
Geometry
- Grade
- 0.14
- Grade Unit
- %
- Intercept
- 10.17 m
- From
- 132.3 m
- To
- 142.47 m
- Intercept Depth
- 132.3 m
Classification
- Sample Type
- drill
- Group ID
- and:132.3-142.47
Location
- CRS
- NAD83/ UTM Zone 11N
QA/QC
- QA/QC Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-21T00:00:00.000Z
Reasoning: Expanded from assay table. 0.14 % zinc is below against the default band [18, 10, 5, 2] %. Grade×width 1.4 %·m is below.
Negative factors
- 0.14 % zinc is below the weak threshold (2 %) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.14”
Context: and
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
anddemonstrate the scale of the mineralizing · silverGrade: 3.68Grade Unit: ppmIntercept: 10.17 mView all detailsHide details
Identity
- Hole ID
- and
- Project
- demonstrate the scale of the mineralizing
- Commodity
- silver
- Region
- usa_nv
- Reported Region
- usa_nv
- Ticker
- GMET
Geometry
- Grade
- 3.68
- Grade Unit
- ppm
- Intercept
- 10.17 m
- From
- 132.3 m
- To
- 142.47 m
- Intercept Depth
- 132.3 m
Classification
- Sample Type
- drill
- Group ID
- and:132.3-142.47
Location
- CRS
- NAD83/ UTM Zone 11N
QA/QC
- QA/QC Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-21T00:00:00.000Z
Reasoning: Expanded from assay table: 3.68 ppm silver, reported in a unit the rubric does not cover (g/t).
Negative factors
- Grade unit ppm does not match the silver rubric unit g/t; not scored.
Evidence · table
“3.68”
Context: and
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
anddemonstrate the scale of the mineralizing · copperGrade: 0Grade Unit: %Intercept: 10.17 mView all detailsHide details
Identity
- Hole ID
- and
- Project
- demonstrate the scale of the mineralizing
- Commodity
- copper
- Region
- usa_nv
- Reported Region
- usa_nv
- Ticker
- GMET
Geometry
- Grade
- 0
- Grade Unit
- %
- Intercept
- 10.17 m
- From
- 132.3 m
- To
- 142.47 m
- Intercept Depth
- 132.3 m
Classification
- Sample Type
- drill
- Group ID
- and:132.3-142.47
Location
- CRS
- NAD83/ UTM Zone 11N
QA/QC
- QA/QC Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-21T00:00:00.000Z
Reasoning: Expanded from assay table. 0 % copper is below against the default band [2.5, 1, 0.5, 0.25] %. Grade×width 0.0 %·m is below.
Negative factors
- 0 % copper is below the weak threshold (0.25 %) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.00”
Context: and
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
TP25-015Tempiute · zincGrade: 0.13Grade Unit: %Intercept: 11.19 mView all detailsHide details
Identity
- Hole ID
- TP25-015
- Project
- Tempiute
- Commodity
- zinc
- Region
- usa_nv
- Reported Region
- usa_nv
- Ticker
- GMET
Geometry
- Grade
- 0.13
- Grade Unit
- %
- Intercept
- 11.19 m
- From
- 94.51 m
- To
- 105.7 m
- Intercept Depth
- 94.51 m
Classification
- Sample Type
- drill
- Group ID
- TP25-015:94.51-105.7
Location
- CRS
- NAD83/ UTM Zone 11N
QA/QC
- QA/QC Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-21T00:00:00.000Z
Reasoning: Expanded from assay table. 0.13 % zinc is below against the default band [18, 10, 5, 2] %. Grade×width 1.5 %·m is below.
Negative factors
- 0.13 % zinc is below the weak threshold (2 %) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.13”
Context: TP25-015
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
TP25-015Tempiute · silverGrade: 0.81Grade Unit: ppmIntercept: 11.19 mView all detailsHide details
Identity
- Hole ID
- TP25-015
- Project
- Tempiute
- Commodity
- silver
- Region
- usa_nv
- Reported Region
- usa_nv
- Ticker
- GMET
Geometry
- Grade
- 0.81
- Grade Unit
- ppm
- Intercept
- 11.19 m
- From
- 94.51 m
- To
- 105.7 m
- Intercept Depth
- 94.51 m
Classification
- Sample Type
- drill
- Group ID
- TP25-015:94.51-105.7
Location
- CRS
- NAD83/ UTM Zone 11N
QA/QC
- QA/QC Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-21T00:00:00.000Z
Reasoning: Expanded from assay table: 0.81 ppm silver, reported in a unit the rubric does not cover (g/t).
Negative factors
- Grade unit ppm does not match the silver rubric unit g/t; not scored.
Evidence · table
“0.81”
Context: TP25-015
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
TP25-015Tempiute · copperGrade: 0Grade Unit: %Intercept: 11.19 mView all detailsHide details
Identity
- Hole ID
- TP25-015
- Project
- Tempiute
- Commodity
- copper
- Region
- usa_nv
- Reported Region
- usa_nv
- Ticker
- GMET
Geometry
- Grade
- 0
- Grade Unit
- %
- Intercept
- 11.19 m
- From
- 94.51 m
- To
- 105.7 m
- Intercept Depth
- 94.51 m
Classification
- Sample Type
- drill
- Group ID
- TP25-015:94.51-105.7
Location
- CRS
- NAD83/ UTM Zone 11N
QA/QC
- QA/QC Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-21T00:00:00.000Z
Reasoning: Expanded from assay table. 0 % copper is below against the default band [2.5, 1, 0.5, 0.25] %. Grade×width 0.0 %·m is below.
Negative factors
- 0 % copper is below the weak threshold (0.25 %) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.00”
Context: TP25-015
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
incl.Tempiute · zincGrade: 0.5Grade Unit: %Intercept: 2.25 mView all detailsHide details
Identity
- Hole ID
- incl.
- Project
- Tempiute
- Commodity
- zinc
- Region
- usa_nv
- Reported Region
- usa_nv
- Ticker
- GMET
Geometry
- Grade
- 0.5
- Grade Unit
- %
- Intercept
- 2.25 m
- From
- 98.6 m
- To
- 100.85 m
- Intercept Depth
- 98.6 m
Classification
- Sample Type
- drill
- Group ID
- incl.:98.6-100.85
Location
- CRS
- NAD83/ UTM Zone 11N
QA/QC
- QA/QC Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-21T00:00:00.000Z
Reasoning: Expanded from assay table. 0.5 % zinc is below against the default band [18, 10, 5, 2] %. Grade×width 1.1 %·m is below.
Negative factors
- 0.5 % zinc is below the weak threshold (2 %) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.50”
Context: incl.
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
incl.Tempiute · silverGrade: 1Grade Unit: ppmIntercept: 2.25 mView all detailsHide details
Identity
- Hole ID
- incl.
- Project
- Tempiute
- Commodity
- silver
- Region
- usa_nv
- Reported Region
- usa_nv
- Ticker
- GMET
Geometry
- Grade
- 1
- Grade Unit
- ppm
- Intercept
- 2.25 m
- From
- 98.6 m
- To
- 100.85 m
- Intercept Depth
- 98.6 m
Classification
- Sample Type
- drill
- Group ID
- incl.:98.6-100.85
Location
- CRS
- NAD83/ UTM Zone 11N
QA/QC
- QA/QC Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-21T00:00:00.000Z
Reasoning: Expanded from assay table: 1 ppm silver, reported in a unit the rubric does not cover (g/t).
Negative factors
- Grade unit ppm does not match the silver rubric unit g/t; not scored.
Evidence · table
“1.00”
Context: incl.
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
incl.Tempiute · copperGrade: 0Grade Unit: %Intercept: 2.25 mView all detailsHide details
Identity
- Hole ID
- incl.
- Project
- Tempiute
- Commodity
- copper
- Region
- usa_nv
- Reported Region
- usa_nv
- Ticker
- GMET
Geometry
- Grade
- 0
- Grade Unit
- %
- Intercept
- 2.25 m
- From
- 98.6 m
- To
- 100.85 m
- Intercept Depth
- 98.6 m
Classification
- Sample Type
- drill
- Group ID
- incl.:98.6-100.85
Location
- CRS
- NAD83/ UTM Zone 11N
QA/QC
- QA/QC Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-21T00:00:00.000Z
Reasoning: Expanded from assay table. 0 % copper is below against the default band [2.5, 1, 0.5, 0.25] %. Grade×width 0.0 %·m is below.
Negative factors
- 0 % copper is below the weak threshold (0.25 %) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.00”
Context: incl.
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
anddemonstrate the scale of the mineralizing · zincGrade: 0.26Grade Unit: %Intercept: 2.3 mView all detailsHide details
Identity
- Hole ID
- and
- Project
- demonstrate the scale of the mineralizing
- Commodity
- zinc
- Region
- usa_nv
- Reported Region
- usa_nv
- Ticker
- GMET
Geometry
- Grade
- 0.26
- Grade Unit
- %
- Intercept
- 2.3 m
- From
- 132.73 m
- To
- 135.03 m
- Intercept Depth
- 132.73 m
Classification
- Sample Type
- drill
- Group ID
- and:132.73-135.03
Location
- CRS
- NAD83/ UTM Zone 11N
QA/QC
- QA/QC Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-21T00:00:00.000Z
Reasoning: Expanded from assay table. 0.26 % zinc is below against the default band [18, 10, 5, 2] %. Grade×width 0.6 %·m is below.
Negative factors
- 0.26 % zinc is below the weak threshold (2 %) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.26”
Context: and
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
anddemonstrate the scale of the mineralizing · silverGrade: 0.5Grade Unit: ppmIntercept: 2.3 mView all detailsHide details
Identity
- Hole ID
- and
- Project
- demonstrate the scale of the mineralizing
- Commodity
- silver
- Region
- usa_nv
- Reported Region
- usa_nv
- Ticker
- GMET
Geometry
- Grade
- 0.5
- Grade Unit
- ppm
- Intercept
- 2.3 m
- From
- 132.73 m
- To
- 135.03 m
- Intercept Depth
- 132.73 m
Classification
- Sample Type
- drill
- Group ID
- and:132.73-135.03
Location
- CRS
- NAD83/ UTM Zone 11N
QA/QC
- QA/QC Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-21T00:00:00.000Z
Reasoning: Expanded from assay table: 0.5 ppm silver, reported in a unit the rubric does not cover (g/t).
Negative factors
- Grade unit ppm does not match the silver rubric unit g/t; not scored.
Evidence · table
“0.50”
Context: and
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
anddemonstrate the scale of the mineralizing · copperGrade: 0Grade Unit: %Intercept: 2.3 mView all detailsHide details
Identity
- Hole ID
- and
- Project
- demonstrate the scale of the mineralizing
- Commodity
- copper
- Region
- usa_nv
- Reported Region
- usa_nv
- Ticker
- GMET
Geometry
- Grade
- 0
- Grade Unit
- %
- Intercept
- 2.3 m
- From
- 132.73 m
- To
- 135.03 m
- Intercept Depth
- 132.73 m
Classification
- Sample Type
- drill
- Group ID
- and:132.73-135.03
Location
- CRS
- NAD83/ UTM Zone 11N
QA/QC
- QA/QC Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-21T00:00:00.000Z
Reasoning: Expanded from assay table. 0 % copper is below against the default band [2.5, 1, 0.5, 0.25] %. Grade×width 0.0 %·m is below.
Negative factors
- 0 % copper is below the weak threshold (0.25 %) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.00”
Context: and
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
anddemonstrate the scale of the mineralizing · zincGrade: 0.02Grade Unit: %Intercept: 2.45 mView all detailsHide details
Identity
- Hole ID
- and
- Project
- demonstrate the scale of the mineralizing
- Commodity
- zinc
- Region
- usa_nv
- Reported Region
- usa_nv
- Ticker
- GMET
Geometry
- Grade
- 0.02
- Grade Unit
- %
- Intercept
- 2.45 m
- From
- 172.37 m
- To
- 174.82 m
- Intercept Depth
- 172.37 m
Classification
- Sample Type
- drill
- Group ID
- and:172.37-174.82
Location
- CRS
- NAD83/ UTM Zone 11N
QA/QC
- QA/QC Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-21T00:00:00.000Z
Reasoning: Expanded from assay table. 0.02 % zinc is below against the default band [18, 10, 5, 2] %. Grade×width 0.0 %·m is below.
Negative factors
- 0.02 % zinc is below the weak threshold (2 %) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.02”
Context: and
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
anddemonstrate the scale of the mineralizing · silverGrade: 0.77Grade Unit: ppmIntercept: 2.45 mView all detailsHide details
Identity
- Hole ID
- and
- Project
- demonstrate the scale of the mineralizing
- Commodity
- silver
- Region
- usa_nv
- Reported Region
- usa_nv
- Ticker
- GMET
Geometry
- Grade
- 0.77
- Grade Unit
- ppm
- Intercept
- 2.45 m
- From
- 172.37 m
- To
- 174.82 m
- Intercept Depth
- 172.37 m
Classification
- Sample Type
- drill
- Group ID
- and:172.37-174.82
Location
- CRS
- NAD83/ UTM Zone 11N
QA/QC
- QA/QC Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-21T00:00:00.000Z
Reasoning: Expanded from assay table: 0.77 ppm silver, reported in a unit the rubric does not cover (g/t).
Negative factors
- Grade unit ppm does not match the silver rubric unit g/t; not scored.
Evidence · table
“0.77”
Context: and
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
anddemonstrate the scale of the mineralizing · copperGrade: 0Grade Unit: %Intercept: 2.45 mView all detailsHide details
Identity
- Hole ID
- and
- Project
- demonstrate the scale of the mineralizing
- Commodity
- copper
- Region
- usa_nv
- Reported Region
- usa_nv
- Ticker
- GMET
Geometry
- Grade
- 0
- Grade Unit
- %
- Intercept
- 2.45 m
- From
- 172.37 m
- To
- 174.82 m
- Intercept Depth
- 172.37 m
Classification
- Sample Type
- drill
- Group ID
- and:172.37-174.82
Location
- CRS
- NAD83/ UTM Zone 11N
QA/QC
- QA/QC Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-21T00:00:00.000Z
Reasoning: Expanded from assay table. 0 % copper is below against the default band [2.5, 1, 0.5, 0.25] %. Grade×width 0.0 %·m is below.
Negative factors
- 0 % copper is below the weak threshold (0.25 %) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.00”
Context: and
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
TP25-017Tempiute · zincGrade: 0.14Grade Unit: %Intercept: 8.23 mView all detailsHide details
Identity
- Hole ID
- TP25-017
- Project
- Tempiute
- Commodity
- zinc
- Region
- usa_nv
- Reported Region
- usa_nv
- Ticker
- GMET
Geometry
- Grade
- 0.14
- Grade Unit
- %
- Intercept
- 8.23 m
- From
- 0 m
- To
- 8.23 m
Classification
- Sample Type
- drill
- Group ID
- TP25-017:0-8.23
Location
- CRS
- NAD83/ UTM Zone 11N
QA/QC
- QA/QC Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-21T00:00:00.000Z
Reasoning: Expanded from assay table. 0.14 % zinc is below against the default band [18, 10, 5, 2] %. Grade×width 1.2 %·m is below.
Negative factors
- 0.14 % zinc is below the weak threshold (2 %) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.14”
Context: TP25-017
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
TP25-017Tempiute · silverGrade: 4.15Grade Unit: ppmIntercept: 8.23 mView all detailsHide details
Identity
- Hole ID
- TP25-017
- Project
- Tempiute
- Commodity
- silver
- Region
- usa_nv
- Reported Region
- usa_nv
- Ticker
- GMET
Geometry
- Grade
- 4.15
- Grade Unit
- ppm
- Intercept
- 8.23 m
- From
- 0 m
- To
- 8.23 m
Classification
- Sample Type
- drill
- Group ID
- TP25-017:0-8.23
Location
- CRS
- NAD83/ UTM Zone 11N
QA/QC
- QA/QC Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-21T00:00:00.000Z
Reasoning: Expanded from assay table: 4.15 ppm silver, reported in a unit the rubric does not cover (g/t).
Negative factors
- Grade unit ppm does not match the silver rubric unit g/t; not scored.
Evidence · table
“4.15”
Context: TP25-017
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
TP25-017Tempiute · copperGrade: 0.02Grade Unit: %Intercept: 8.23 mView all detailsHide details
Identity
- Hole ID
- TP25-017
- Project
- Tempiute
- Commodity
- copper
- Region
- usa_nv
- Reported Region
- usa_nv
- Ticker
- GMET
Geometry
- Grade
- 0.02
- Grade Unit
- %
- Intercept
- 8.23 m
- From
- 0 m
- To
- 8.23 m
Classification
- Sample Type
- drill
- Group ID
- TP25-017:0-8.23
Location
- CRS
- NAD83/ UTM Zone 11N
QA/QC
- QA/QC Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-21T00:00:00.000Z
Reasoning: Expanded from assay table. 0.02 % copper is below against the default band [2.5, 1, 0.5, 0.25] %. Grade×width 0.2 %·m is below.
Negative factors
- 0.02 % copper is below the weak threshold (0.25 %) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.02”
Context: TP25-017
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
anddemonstrate the scale of the mineralizing · zincGrade: 0.09Grade Unit: %Intercept: 2.89 mView all detailsHide details
Identity
- Hole ID
- and
- Project
- demonstrate the scale of the mineralizing
- Commodity
- zinc
- Region
- usa_nv
- Reported Region
- usa_nv
- Ticker
- GMET
Geometry
- Grade
- 0.09
- Grade Unit
- %
- Intercept
- 2.89 m
- From
- 63.25 m
- To
- 66.14 m
- Intercept Depth
- 63.25 m
Classification
- Sample Type
- drill
- Group ID
- and:63.25-66.14
Location
- CRS
- NAD83/ UTM Zone 11N
QA/QC
- QA/QC Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-21T00:00:00.000Z
Reasoning: Expanded from assay table. 0.09 % zinc is below against the default band [18, 10, 5, 2] %. Grade×width 0.3 %·m is below.
Negative factors
- 0.09 % zinc is below the weak threshold (2 %) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.09”
Context: and
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
anddemonstrate the scale of the mineralizing · silverGrade: 1Grade Unit: ppmIntercept: 2.89 mView all detailsHide details
Identity
- Hole ID
- and
- Project
- demonstrate the scale of the mineralizing
- Commodity
- silver
- Region
- usa_nv
- Reported Region
- usa_nv
- Ticker
- GMET
Geometry
- Grade
- 1
- Grade Unit
- ppm
- Intercept
- 2.89 m
- From
- 63.25 m
- To
- 66.14 m
- Intercept Depth
- 63.25 m
Classification
- Sample Type
- drill
- Group ID
- and:63.25-66.14
Location
- CRS
- NAD83/ UTM Zone 11N
QA/QC
- QA/QC Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-21T00:00:00.000Z
Reasoning: Expanded from assay table: 1 ppm silver, reported in a unit the rubric does not cover (g/t).
Negative factors
- Grade unit ppm does not match the silver rubric unit g/t; not scored.
Evidence · table
“1.00”
Context: and
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
anddemonstrate the scale of the mineralizing · copperGrade: 0Grade Unit: %Intercept: 2.89 mView all detailsHide details
Identity
- Hole ID
- and
- Project
- demonstrate the scale of the mineralizing
- Commodity
- copper
- Region
- usa_nv
- Reported Region
- usa_nv
- Ticker
- GMET
Geometry
- Grade
- 0
- Grade Unit
- %
- Intercept
- 2.89 m
- From
- 63.25 m
- To
- 66.14 m
- Intercept Depth
- 63.25 m
Classification
- Sample Type
- drill
- Group ID
- and:63.25-66.14
Location
- CRS
- NAD83/ UTM Zone 11N
QA/QC
- QA/QC Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-21T00:00:00.000Z
Reasoning: Expanded from assay table. 0 % copper is below against the default band [2.5, 1, 0.5, 0.25] %. Grade×width 0.0 %·m is below.
Negative factors
- 0 % copper is below the weak threshold (0.25 %) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.00”
Context: and
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
TP25-019Tempiute · zincGrade: 0.16Grade Unit: %Intercept: 2.24 mView all detailsHide details
Identity
- Hole ID
- TP25-019
- Project
- Tempiute
- Commodity
- zinc
- Region
- usa_nv
- Reported Region
- usa_nv
- Ticker
- GMET
Geometry
- Grade
- 0.16
- Grade Unit
- %
- Intercept
- 2.24 m
- From
- 59 m
- To
- 61.24 m
- Intercept Depth
- 59 m
Classification
- Sample Type
- drill
- Group ID
- TP25-019:59-61.24
Location
- CRS
- NAD83/ UTM Zone 11N
QA/QC
- QA/QC Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-21T00:00:00.000Z
Reasoning: Expanded from assay table. 0.16 % zinc is below against the default band [18, 10, 5, 2] %. Grade×width 0.4 %·m is below.
Negative factors
- 0.16 % zinc is below the weak threshold (2 %) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.16”
Context: TP25-019
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
TP25-019Tempiute · silverGrade: 0.73Grade Unit: ppmIntercept: 2.24 mView all detailsHide details
Identity
- Hole ID
- TP25-019
- Project
- Tempiute
- Commodity
- silver
- Region
- usa_nv
- Reported Region
- usa_nv
- Ticker
- GMET
Geometry
- Grade
- 0.73
- Grade Unit
- ppm
- Intercept
- 2.24 m
- From
- 59 m
- To
- 61.24 m
- Intercept Depth
- 59 m
Classification
- Sample Type
- drill
- Group ID
- TP25-019:59-61.24
Location
- CRS
- NAD83/ UTM Zone 11N
QA/QC
- QA/QC Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-21T00:00:00.000Z
Reasoning: Expanded from assay table: 0.73 ppm silver, reported in a unit the rubric does not cover (g/t).
Negative factors
- Grade unit ppm does not match the silver rubric unit g/t; not scored.
Evidence · table
“0.73”
Context: TP25-019
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
TP25-019Tempiute · copperGrade: 0Grade Unit: %Intercept: 2.24 mView all detailsHide details
Identity
- Hole ID
- TP25-019
- Project
- Tempiute
- Commodity
- copper
- Region
- usa_nv
- Reported Region
- usa_nv
- Ticker
- GMET
Geometry
- Grade
- 0
- Grade Unit
- %
- Intercept
- 2.24 m
- From
- 59 m
- To
- 61.24 m
- Intercept Depth
- 59 m
Classification
- Sample Type
- drill
- Group ID
- TP25-019:59-61.24
Location
- CRS
- NAD83/ UTM Zone 11N
QA/QC
- QA/QC Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-21T00:00:00.000Z
Reasoning: Expanded from assay table. 0 % copper is below against the default band [2.5, 1, 0.5, 0.25] %. Grade×width 0.0 %·m is below.
Negative factors
- 0 % copper is below the weak threshold (0.25 %) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.00”
Context: TP25-019
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
anddemonstrate the scale of the mineralizing · zincGrade: 0.1Grade Unit: %Intercept: 2.64 mView all detailsHide details
Identity
- Hole ID
- and
- Project
- demonstrate the scale of the mineralizing
- Commodity
- zinc
- Region
- usa_nv
- Reported Region
- usa_nv
- Ticker
- GMET
Geometry
- Grade
- 0.1
- Grade Unit
- %
- Intercept
- 2.64 m
- From
- 88.72 m
- To
- 91.36 m
- Intercept Depth
- 88.72 m
Classification
- Sample Type
- drill
- Group ID
- and:88.72-91.36
Location
- CRS
- NAD83/ UTM Zone 11N
QA/QC
- QA/QC Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-21T00:00:00.000Z
Reasoning: Expanded from assay table. 0.1 % zinc is below against the default band [18, 10, 5, 2] %. Grade×width 0.3 %·m is below.
Negative factors
- 0.1 % zinc is below the weak threshold (2 %) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.10”
Context: and
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
anddemonstrate the scale of the mineralizing · silverGrade: 1Grade Unit: ppmIntercept: 2.64 mView all detailsHide details
Identity
- Hole ID
- and
- Project
- demonstrate the scale of the mineralizing
- Commodity
- silver
- Region
- usa_nv
- Reported Region
- usa_nv
- Ticker
- GMET
Geometry
- Grade
- 1
- Grade Unit
- ppm
- Intercept
- 2.64 m
- From
- 88.72 m
- To
- 91.36 m
- Intercept Depth
- 88.72 m
Classification
- Sample Type
- drill
- Group ID
- and:88.72-91.36
Location
- CRS
- NAD83/ UTM Zone 11N
QA/QC
- QA/QC Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-21T00:00:00.000Z
Reasoning: Expanded from assay table: 1 ppm silver, reported in a unit the rubric does not cover (g/t).
Negative factors
- Grade unit ppm does not match the silver rubric unit g/t; not scored.
Evidence · table
“1.00”
Context: and
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
anddemonstrate the scale of the mineralizing · copperGrade: 0Grade Unit: %Intercept: 2.64 mView all detailsHide details
Identity
- Hole ID
- and
- Project
- demonstrate the scale of the mineralizing
- Commodity
- copper
- Region
- usa_nv
- Reported Region
- usa_nv
- Ticker
- GMET
Geometry
- Grade
- 0
- Grade Unit
- %
- Intercept
- 2.64 m
- From
- 88.72 m
- To
- 91.36 m
- Intercept Depth
- 88.72 m
Classification
- Sample Type
- drill
- Group ID
- and:88.72-91.36
Location
- CRS
- NAD83/ UTM Zone 11N
QA/QC
- QA/QC Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-21T00:00:00.000Z
Reasoning: Expanded from assay table. 0 % copper is below against the default band [2.5, 1, 0.5, 0.25] %. Grade×width 0.0 %·m is below.
Negative factors
- 0 % copper is below the weak threshold (0.25 %) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.00”
Context: and
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
anddemonstrate the scale of the mineralizing · zincGrade: 0.31Grade Unit: %Intercept: 4.32 mView all detailsHide details
Identity
- Hole ID
- and
- Project
- demonstrate the scale of the mineralizing
- Commodity
- zinc
- Region
- usa_nv
- Reported Region
- usa_nv
- Ticker
- GMET
Geometry
- Grade
- 0.31
- Grade Unit
- %
- Intercept
- 4.32 m
- From
- 196.6 m
- To
- 200.92 m
- Intercept Depth
- 196.6 m
Classification
- Sample Type
- drill
- Group ID
- and:196.6-200.92
Location
- CRS
- NAD83/ UTM Zone 11N
QA/QC
- QA/QC Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-21T00:00:00.000Z
Reasoning: Expanded from assay table. 0.31 % zinc is below against the default band [18, 10, 5, 2] %. Grade×width 1.3 %·m is below.
Negative factors
- 0.31 % zinc is below the weak threshold (2 %) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.31”
Context: and
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
anddemonstrate the scale of the mineralizing · silverGrade: 1.13Grade Unit: ppmIntercept: 4.32 mView all detailsHide details
Identity
- Hole ID
- and
- Project
- demonstrate the scale of the mineralizing
- Commodity
- silver
- Region
- usa_nv
- Reported Region
- usa_nv
- Ticker
- GMET
Geometry
- Grade
- 1.13
- Grade Unit
- ppm
- Intercept
- 4.32 m
- From
- 196.6 m
- To
- 200.92 m
- Intercept Depth
- 196.6 m
Classification
- Sample Type
- drill
- Group ID
- and:196.6-200.92
Location
- CRS
- NAD83/ UTM Zone 11N
QA/QC
- QA/QC Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-21T00:00:00.000Z
Reasoning: Expanded from assay table: 1.13 ppm silver, reported in a unit the rubric does not cover (g/t).
Negative factors
- Grade unit ppm does not match the silver rubric unit g/t; not scored.
Evidence · table
“1.13”
Context: and
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
anddemonstrate the scale of the mineralizing · copperGrade: 0Grade Unit: %Intercept: 4.32 mView all detailsHide details
Identity
- Hole ID
- and
- Project
- demonstrate the scale of the mineralizing
- Commodity
- copper
- Region
- usa_nv
- Reported Region
- usa_nv
- Ticker
- GMET
Geometry
- Grade
- 0
- Grade Unit
- %
- Intercept
- 4.32 m
- From
- 196.6 m
- To
- 200.92 m
- Intercept Depth
- 196.6 m
Classification
- Sample Type
- drill
- Group ID
- and:196.6-200.92
Location
- CRS
- NAD83/ UTM Zone 11N
QA/QC
- QA/QC Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-21T00:00:00.000Z
Reasoning: Expanded from assay table. 0 % copper is below against the default band [2.5, 1, 0.5, 0.25] %. Grade×width 0.0 %·m is below.
Negative factors
- 0 % copper is below the weak threshold (0.25 %) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.00”
Context: and
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
TP25-020ATempiute · zincGrade: 0.37Grade Unit: %Intercept: 8.79 mView all detailsHide details
Identity
- Hole ID
- TP25-020A
- Project
- Tempiute
- Commodity
- zinc
- Region
- usa_nv
- Reported Region
- usa_nv
- Ticker
- GMET
Geometry
- Grade
- 0.37
- Grade Unit
- %
- Intercept
- 8.79 m
- From
- 183.64 m
- To
- 192.43 m
- Intercept Depth
- 183.64 m
Classification
- Sample Type
- drill
- Group ID
- TP25-020A:183.64-192.43
Location
- CRS
- NAD83/ UTM Zone 11N
QA/QC
- QA/QC Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-21T00:00:00.000Z
Reasoning: Expanded from assay table. 0.37 % zinc is below against the default band [18, 10, 5, 2] %. Grade×width 3.3 %·m is below.
Negative factors
- 0.37 % zinc is below the weak threshold (2 %) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.37”
Context: TP25-020A
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
TP25-020ATempiute · silverGrade: 118.28Grade Unit: ppmIntercept: 8.79 mView all detailsHide details
Identity
- Hole ID
- TP25-020A
- Project
- Tempiute
- Commodity
- silver
- Region
- usa_nv
- Reported Region
- usa_nv
- Ticker
- GMET
Geometry
- Grade
- 118.28
- Grade Unit
- ppm
- Intercept
- 8.79 m
- From
- 183.64 m
- To
- 192.43 m
- Intercept Depth
- 183.64 m
Classification
- Sample Type
- drill
- Group ID
- TP25-020A:183.64-192.43
Location
- CRS
- NAD83/ UTM Zone 11N
QA/QC
- QA/QC Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-21T00:00:00.000Z
Reasoning: Expanded from assay table: 118.28 ppm silver, reported in a unit the rubric does not cover (g/t).
Negative factors
- Grade unit ppm does not match the silver rubric unit g/t; not scored.
Evidence · table
“118.28”
Context: TP25-020A
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
TP25-020ATempiute · copperGrade: 0.04Grade Unit: %Intercept: 8.79 mView all detailsHide details
Identity
- Hole ID
- TP25-020A
- Project
- Tempiute
- Commodity
- copper
- Region
- usa_nv
- Reported Region
- usa_nv
- Ticker
- GMET
Geometry
- Grade
- 0.04
- Grade Unit
- %
- Intercept
- 8.79 m
- From
- 183.64 m
- To
- 192.43 m
- Intercept Depth
- 183.64 m
Classification
- Sample Type
- drill
- Group ID
- TP25-020A:183.64-192.43
Location
- CRS
- NAD83/ UTM Zone 11N
QA/QC
- QA/QC Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-21T00:00:00.000Z
Reasoning: Expanded from assay table. 0.04 % copper is below against the default band [2.5, 1, 0.5, 0.25] %. Grade×width 0.4 %·m is below.
Negative factors
- 0.04 % copper is below the weak threshold (0.25 %) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.04”
Context: TP25-020A
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
incl.Tempiute · zincGrade: 0.07Grade Unit: %Intercept: 2.13 mView all detailsHide details
Identity
- Hole ID
- incl.
- Project
- Tempiute
- Commodity
- zinc
- Region
- usa_nv
- Reported Region
- usa_nv
- Ticker
- GMET
Geometry
- Grade
- 0.07
- Grade Unit
- %
- Intercept
- 2.13 m
- From
- 186.64 m
- To
- 188.77 m
- Intercept Depth
- 186.64 m
Classification
- Sample Type
- drill
- Group ID
- incl.:186.64-188.77
Location
- CRS
- NAD83/ UTM Zone 11N
QA/QC
- QA/QC Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-21T00:00:00.000Z
Reasoning: Expanded from assay table. 0.07 % zinc is below against the default band [18, 10, 5, 2] %. Grade×width 0.1 %·m is below.
Negative factors
- 0.07 % zinc is below the weak threshold (2 %) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.07”
Context: incl.
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
incl.Tempiute · silverGrade: 0.25Grade Unit: ppmIntercept: 2.13 mView all detailsHide details
Identity
- Hole ID
- incl.
- Project
- Tempiute
- Commodity
- silver
- Region
- usa_nv
- Reported Region
- usa_nv
- Ticker
- GMET
Geometry
- Grade
- 0.25
- Grade Unit
- ppm
- Intercept
- 2.13 m
- From
- 186.64 m
- To
- 188.77 m
- Intercept Depth
- 186.64 m
Classification
- Sample Type
- drill
- Group ID
- incl.:186.64-188.77
Location
- CRS
- NAD83/ UTM Zone 11N
QA/QC
- QA/QC Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-21T00:00:00.000Z
Reasoning: Expanded from assay table: 0.25 ppm silver, reported in a unit the rubric does not cover (g/t).
Negative factors
- Grade unit ppm does not match the silver rubric unit g/t; not scored.
Evidence · table
“0.25”
Context: incl.
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
incl.Tempiute · copperGrade: 0Grade Unit: %Intercept: 2.13 mView all detailsHide details
Identity
- Hole ID
- incl.
- Project
- Tempiute
- Commodity
- copper
- Region
- usa_nv
- Reported Region
- usa_nv
- Ticker
- GMET
Geometry
- Grade
- 0
- Grade Unit
- %
- Intercept
- 2.13 m
- From
- 186.64 m
- To
- 188.77 m
- Intercept Depth
- 186.64 m
Classification
- Sample Type
- drill
- Group ID
- incl.:186.64-188.77
Location
- CRS
- NAD83/ UTM Zone 11N
QA/QC
- QA/QC Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-21T00:00:00.000Z
Reasoning: Expanded from assay table. 0 % copper is below against the default band [2.5, 1, 0.5, 0.25] %. Grade×width 0.0 %·m is below.
Negative factors
- 0 % copper is below the weak threshold (0.25 %) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.00”
Context: incl.
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
TP25-021Tempiute · zincGrade: 0.27Grade Unit: %Intercept: 32.42 mView all detailsHide details
Identity
- Hole ID
- TP25-021
- Project
- Tempiute
- Commodity
- zinc
- Region
- usa_nv
- Reported Region
- usa_nv
- Ticker
- GMET
Geometry
- Grade
- 0.27
- Grade Unit
- %
- Intercept
- 32.42 m
- From
- 293.72 m
- To
- 326.14 m
- Intercept Depth
- 293.72 m
Classification
- Sample Type
- drill
- Group ID
- TP25-021:293.72-326.14
Location
- CRS
- NAD83/ UTM Zone 11N
QA/QC
- QA/QC Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-21T00:00:00.000Z
Reasoning: Expanded from assay table. 0.27 % zinc is below against the default band [18, 10, 5, 2] %. Grade×width 8.8 %·m is below.
Negative factors
- 0.27 % zinc is below the weak threshold (2 %) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.27”
Context: TP25-021
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
TP25-021Tempiute · silverGrade: 0.33Grade Unit: ppmIntercept: 32.42 mView all detailsHide details
Identity
- Hole ID
- TP25-021
- Project
- Tempiute
- Commodity
- silver
- Region
- usa_nv
- Reported Region
- usa_nv
- Ticker
- GMET
Geometry
- Grade
- 0.33
- Grade Unit
- ppm
- Intercept
- 32.42 m
- From
- 293.72 m
- To
- 326.14 m
- Intercept Depth
- 293.72 m
Classification
- Sample Type
- drill
- Group ID
- TP25-021:293.72-326.14
Location
- CRS
- NAD83/ UTM Zone 11N
QA/QC
- QA/QC Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-21T00:00:00.000Z
Reasoning: Expanded from assay table: 0.33 ppm silver, reported in a unit the rubric does not cover (g/t).
Negative factors
- Grade unit ppm does not match the silver rubric unit g/t; not scored.
Evidence · table
“0.33”
Context: TP25-021
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
TP25-021Tempiute · copperGrade: 0Grade Unit: %Intercept: 32.42 mView all detailsHide details
Identity
- Hole ID
- TP25-021
- Project
- Tempiute
- Commodity
- copper
- Region
- usa_nv
- Reported Region
- usa_nv
- Ticker
- GMET
Geometry
- Grade
- 0
- Grade Unit
- %
- Intercept
- 32.42 m
- From
- 293.72 m
- To
- 326.14 m
- Intercept Depth
- 293.72 m
Classification
- Sample Type
- drill
- Group ID
- TP25-021:293.72-326.14
Location
- CRS
- NAD83/ UTM Zone 11N
QA/QC
- QA/QC Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-21T00:00:00.000Z
Reasoning: Expanded from assay table. 0 % copper is below against the default band [2.5, 1, 0.5, 0.25] %. Grade×width 0.0 %·m is below.
Negative factors
- 0 % copper is below the weak threshold (0.25 %) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.00”
Context: TP25-021
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
incl.Tempiute · zincGrade: 0.5Grade Unit: %Intercept: 1.7 mView all detailsHide details
Identity
- Hole ID
- incl.
- Project
- Tempiute
- Commodity
- zinc
- Region
- usa_nv
- Reported Region
- usa_nv
- Ticker
- GMET
Geometry
- Grade
- 0.5
- Grade Unit
- %
- Intercept
- 1.7 m
- From
- 306.93 m
- To
- 308.63 m
- Intercept Depth
- 306.93 m
Classification
- Sample Type
- drill
- Group ID
- incl.:306.93-308.63
Location
- CRS
- NAD83/ UTM Zone 11N
QA/QC
- QA/QC Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-21T00:00:00.000Z
Reasoning: Expanded from assay table. 0.5 % zinc is below against the default band [18, 10, 5, 2] %. Grade×width 0.8 %·m is below.
Negative factors
- 0.5 % zinc is below the weak threshold (2 %) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.50”
Context: incl.
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
incl.Tempiute · silverGrade: 1.7Grade Unit: ppmIntercept: 1.7 mView all detailsHide details
Identity
- Hole ID
- incl.
- Project
- Tempiute
- Commodity
- silver
- Region
- usa_nv
- Reported Region
- usa_nv
- Ticker
- GMET
Geometry
- Grade
- 1.7
- Grade Unit
- ppm
- Intercept
- 1.7 m
- From
- 306.93 m
- To
- 308.63 m
- Intercept Depth
- 306.93 m
Classification
- Sample Type
- drill
- Group ID
- incl.:306.93-308.63
Location
- CRS
- NAD83/ UTM Zone 11N
QA/QC
- QA/QC Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-21T00:00:00.000Z
Reasoning: Expanded from assay table: 1.7 ppm silver, reported in a unit the rubric does not cover (g/t).
Negative factors
- Grade unit ppm does not match the silver rubric unit g/t; not scored.
Evidence · table
“1.70”
Context: incl.
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
incl.Tempiute · copperGrade: 0Grade Unit: %Intercept: 1.7 mView all detailsHide details
Identity
- Hole ID
- incl.
- Project
- Tempiute
- Commodity
- copper
- Region
- usa_nv
- Reported Region
- usa_nv
- Ticker
- GMET
Geometry
- Grade
- 0
- Grade Unit
- %
- Intercept
- 1.7 m
- From
- 306.93 m
- To
- 308.63 m
- Intercept Depth
- 306.93 m
Classification
- Sample Type
- drill
- Group ID
- incl.:306.93-308.63
Location
- CRS
- NAD83/ UTM Zone 11N
QA/QC
- QA/QC Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-21T00:00:00.000Z
Reasoning: Expanded from assay table. 0 % copper is below against the default band [2.5, 1, 0.5, 0.25] %. Grade×width 0.0 %·m is below.
Negative factors
- 0 % copper is below the weak threshold (0.25 %) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.00”
Context: incl.
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
TP25-026Tempiute · zincGrade: 0.14Grade Unit: %Intercept: 3.66 mView all detailsHide details
Identity
- Hole ID
- TP25-026
- Project
- Tempiute
- Commodity
- zinc
- Region
- usa_nv
- Reported Region
- usa_nv
- Ticker
- GMET
Geometry
- Grade
- 0.14
- Grade Unit
- %
- Intercept
- 3.66 m
- From
- 0.61 m
- To
- 4.27 m
- Intercept Depth
- 0.61 m
Classification
- Sample Type
- drill
- Group ID
- TP25-026:0.61-4.27
Location
- CRS
- NAD83/ UTM Zone 11N
QA/QC
- QA/QC Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-21T00:00:00.000Z
Reasoning: Expanded from assay table. 0.14 % zinc is below against the default band [18, 10, 5, 2] %. Grade×width 0.5 %·m is below.
Negative factors
- 0.14 % zinc is below the weak threshold (2 %) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.14”
Context: TP25-026
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
TP25-026Tempiute · silverGrade: 0.99Grade Unit: ppmIntercept: 3.66 mView all detailsHide details
Identity
- Hole ID
- TP25-026
- Project
- Tempiute
- Commodity
- silver
- Region
- usa_nv
- Reported Region
- usa_nv
- Ticker
- GMET
Geometry
- Grade
- 0.99
- Grade Unit
- ppm
- Intercept
- 3.66 m
- From
- 0.61 m
- To
- 4.27 m
- Intercept Depth
- 0.61 m
Classification
- Sample Type
- drill
- Group ID
- TP25-026:0.61-4.27
Location
- CRS
- NAD83/ UTM Zone 11N
QA/QC
- QA/QC Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-21T00:00:00.000Z
Reasoning: Expanded from assay table: 0.99 ppm silver, reported in a unit the rubric does not cover (g/t).
Negative factors
- Grade unit ppm does not match the silver rubric unit g/t; not scored.
Evidence · table
“0.99”
Context: TP25-026
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
TP25-026Tempiute · copperGrade: 0.04Grade Unit: %Intercept: 3.66 mView all detailsHide details
Identity
- Hole ID
- TP25-026
- Project
- Tempiute
- Commodity
- copper
- Region
- usa_nv
- Reported Region
- usa_nv
- Ticker
- GMET
Geometry
- Grade
- 0.04
- Grade Unit
- %
- Intercept
- 3.66 m
- From
- 0.61 m
- To
- 4.27 m
- Intercept Depth
- 0.61 m
Classification
- Sample Type
- drill
- Group ID
- TP25-026:0.61-4.27
Location
- CRS
- NAD83/ UTM Zone 11N
QA/QC
- QA/QC Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-21T00:00:00.000Z
Reasoning: Expanded from assay table. 0.04 % copper is below against the default band [2.5, 1, 0.5, 0.25] %. Grade×width 0.1 %·m is below.
Negative factors
- 0.04 % copper is below the weak threshold (0.25 %) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.04”
Context: TP25-026
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
TP25-027Tempiute · zincGrade: 0.52Grade Unit: %Intercept: 3.68 mView all detailsHide details
Identity
- Hole ID
- TP25-027
- Project
- Tempiute
- Commodity
- zinc
- Region
- usa_nv
- Reported Region
- usa_nv
- Ticker
- GMET
Geometry
- Grade
- 0.52
- Grade Unit
- %
- Intercept
- 3.68 m
- From
- 28.32 m
- To
- 32 m
- Intercept Depth
- 28.32 m
Classification
- Sample Type
- drill
- Group ID
- TP25-027:28.32-32
Location
- CRS
- NAD83/ UTM Zone 11N
QA/QC
- QA/QC Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-21T00:00:00.000Z
Reasoning: Expanded from assay table. 0.52 % zinc is below against the default band [18, 10, 5, 2] %. Grade×width 1.9 %·m is below.
Negative factors
- 0.52 % zinc is below the weak threshold (2 %) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.52”
Context: TP25-027
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
TP25-027Tempiute · silverGrade: 1.53Grade Unit: ppmIntercept: 3.68 mView all detailsHide details
Identity
- Hole ID
- TP25-027
- Project
- Tempiute
- Commodity
- silver
- Region
- usa_nv
- Reported Region
- usa_nv
- Ticker
- GMET
Geometry
- Grade
- 1.53
- Grade Unit
- ppm
- Intercept
- 3.68 m
- From
- 28.32 m
- To
- 32 m
- Intercept Depth
- 28.32 m
Classification
- Sample Type
- drill
- Group ID
- TP25-027:28.32-32
Location
- CRS
- NAD83/ UTM Zone 11N
QA/QC
- QA/QC Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-21T00:00:00.000Z
Reasoning: Expanded from assay table: 1.53 ppm silver, reported in a unit the rubric does not cover (g/t).
Negative factors
- Grade unit ppm does not match the silver rubric unit g/t; not scored.
Evidence · table
“1.53”
Context: TP25-027
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
TP25-027Tempiute · copperGrade: 0.01Grade Unit: %Intercept: 3.68 mView all detailsHide details
Identity
- Hole ID
- TP25-027
- Project
- Tempiute
- Commodity
- copper
- Region
- usa_nv
- Reported Region
- usa_nv
- Ticker
- GMET
Geometry
- Grade
- 0.01
- Grade Unit
- %
- Intercept
- 3.68 m
- From
- 28.32 m
- To
- 32 m
- Intercept Depth
- 28.32 m
Classification
- Sample Type
- drill
- Group ID
- TP25-027:28.32-32
Location
- CRS
- NAD83/ UTM Zone 11N
QA/QC
- QA/QC Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-21T00:00:00.000Z
Reasoning: Expanded from assay table. 0.01 % copper is below against the default band [2.5, 1, 0.5, 0.25] %. Grade×width 0.0 %·m is below.
Negative factors
- 0.01 % copper is below the weak threshold (0.25 %) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.01”
Context: TP25-027
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
anddemonstrate the scale of the mineralizing · zincGrade: 0.06Grade Unit: %Intercept: 5.03 mView all detailsHide details
Identity
- Hole ID
- and
- Project
- demonstrate the scale of the mineralizing
- Commodity
- zinc
- Region
- usa_nv
- Reported Region
- usa_nv
- Ticker
- GMET
Geometry
- Grade
- 0.06
- Grade Unit
- %
- Intercept
- 5.03 m
- From
- 36.73 m
- To
- 41.76 m
- Intercept Depth
- 36.73 m
Classification
- Sample Type
- drill
- Group ID
- and:36.73-41.76
Location
- CRS
- NAD83/ UTM Zone 11N
QA/QC
- QA/QC Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-21T00:00:00.000Z
Reasoning: Expanded from assay table. 0.06 % zinc is below against the default band [18, 10, 5, 2] %. Grade×width 0.3 %·m is below.
Negative factors
- 0.06 % zinc is below the weak threshold (2 %) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.06”
Context: and
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
anddemonstrate the scale of the mineralizing · silverGrade: 4.66Grade Unit: ppmIntercept: 5.03 mView all detailsHide details
Identity
- Hole ID
- and
- Project
- demonstrate the scale of the mineralizing
- Commodity
- silver
- Region
- usa_nv
- Reported Region
- usa_nv
- Ticker
- GMET
Geometry
- Grade
- 4.66
- Grade Unit
- ppm
- Intercept
- 5.03 m
- From
- 36.73 m
- To
- 41.76 m
- Intercept Depth
- 36.73 m
Classification
- Sample Type
- drill
- Group ID
- and:36.73-41.76
Location
- CRS
- NAD83/ UTM Zone 11N
QA/QC
- QA/QC Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-21T00:00:00.000Z
Reasoning: Expanded from assay table: 4.66 ppm silver, reported in a unit the rubric does not cover (g/t).
Negative factors
- Grade unit ppm does not match the silver rubric unit g/t; not scored.
Evidence · table
“4.66”
Context: and
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
anddemonstrate the scale of the mineralizing · copperGrade: 0.26Grade Unit: %Intercept: 5.03 mView all detailsHide details
Identity
- Hole ID
- and
- Project
- demonstrate the scale of the mineralizing
- Commodity
- copper
- Region
- usa_nv
- Reported Region
- usa_nv
- Ticker
- GMET
Geometry
- Grade
- 0.26
- Grade Unit
- %
- Intercept
- 5.03 m
- From
- 36.73 m
- To
- 41.76 m
- Intercept Depth
- 36.73 m
Classification
- Sample Type
- drill
- Group ID
- and:36.73-41.76
Location
- CRS
- NAD83/ UTM Zone 11N
QA/QC
- QA/QC Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-21T00:00:00.000Z
Reasoning: Expanded from assay table. 0.26 % copper is weak against the default band [2.5, 1, 0.5, 0.25] %. Grade×width 1.3 %·m is below (grade alone is weak; the better of the two is used).
Negative factors
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.26”
Context: and
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
anddemonstrate the scale of the mineralizing · zincGrade: 0.1Grade Unit: %Intercept: 1.58 mView all detailsHide details
Identity
- Hole ID
- and
- Project
- demonstrate the scale of the mineralizing
- Commodity
- zinc
- Region
- usa_nv
- Reported Region
- usa_nv
- Ticker
- GMET
Geometry
- Grade
- 0.1
- Grade Unit
- %
- Intercept
- 1.58 m
- From
- 42.37 m
- To
- 43.95 m
- Intercept Depth
- 42.37 m
Classification
- Sample Type
- drill
- Group ID
- and:42.37-43.95
Location
- CRS
- NAD83/ UTM Zone 11N
QA/QC
- QA/QC Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-21T00:00:00.000Z
Reasoning: Expanded from assay table. 0.1 % zinc is below against the default band [18, 10, 5, 2] %. Grade×width 0.2 %·m is below.
Negative factors
- 0.1 % zinc is below the weak threshold (2 %) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.10”
Context: and
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
anddemonstrate the scale of the mineralizing · silverGrade: 2.18Grade Unit: ppmIntercept: 1.58 mView all detailsHide details
Identity
- Hole ID
- and
- Project
- demonstrate the scale of the mineralizing
- Commodity
- silver
- Region
- usa_nv
- Reported Region
- usa_nv
- Ticker
- GMET
Geometry
- Grade
- 2.18
- Grade Unit
- ppm
- Intercept
- 1.58 m
- From
- 42.37 m
- To
- 43.95 m
- Intercept Depth
- 42.37 m
Classification
- Sample Type
- drill
- Group ID
- and:42.37-43.95
Location
- CRS
- NAD83/ UTM Zone 11N
QA/QC
- QA/QC Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-21T00:00:00.000Z
Reasoning: Expanded from assay table: 2.18 ppm silver, reported in a unit the rubric does not cover (g/t).
Negative factors
- Grade unit ppm does not match the silver rubric unit g/t; not scored.
Evidence · table
“2.18”
Context: and
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
anddemonstrate the scale of the mineralizing · copperGrade: 0.09Grade Unit: %Intercept: 1.58 mView all detailsHide details
Identity
- Hole ID
- and
- Project
- demonstrate the scale of the mineralizing
- Commodity
- copper
- Region
- usa_nv
- Reported Region
- usa_nv
- Ticker
- GMET
Geometry
- Grade
- 0.09
- Grade Unit
- %
- Intercept
- 1.58 m
- From
- 42.37 m
- To
- 43.95 m
- Intercept Depth
- 42.37 m
Classification
- Sample Type
- drill
- Group ID
- and:42.37-43.95
Location
- CRS
- NAD83/ UTM Zone 11N
QA/QC
- QA/QC Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-21T00:00:00.000Z
Reasoning: Expanded from assay table. 0.09 % copper is below against the default band [2.5, 1, 0.5, 0.25] %. Grade×width 0.1 %·m is below.
Negative factors
- 0.09 % copper is below the weak threshold (0.25 %) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.09”
Context: and
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
TP25-028Tempiute · zincGrade: 0.06Grade Unit: %Intercept: 18.46 mView all detailsHide details
Identity
- Hole ID
- TP25-028
- Project
- Tempiute
- Commodity
- zinc
- Region
- usa_nv
- Reported Region
- usa_nv
- Ticker
- GMET
Geometry
- Grade
- 0.06
- Grade Unit
- %
- Intercept
- 18.46 m
- From
- 24.54 m
- To
- 43 m
- Intercept Depth
- 24.54 m
Classification
- Sample Type
- drill
- Group ID
- TP25-028:24.54-43
Location
- CRS
- NAD83/ UTM Zone 11N
QA/QC
- QA/QC Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-21T00:00:00.000Z
Reasoning: Expanded from assay table. 0.06 % zinc is below against the default band [18, 10, 5, 2] %. Grade×width 1.1 %·m is below.
Negative factors
- 0.06 % zinc is below the weak threshold (2 %) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.06”
Context: TP25-028
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
TP25-028Tempiute · silverGrade: 1.67Grade Unit: ppmIntercept: 18.46 mView all detailsHide details
Identity
- Hole ID
- TP25-028
- Project
- Tempiute
- Commodity
- silver
- Region
- usa_nv
- Reported Region
- usa_nv
- Ticker
- GMET
Geometry
- Grade
- 1.67
- Grade Unit
- ppm
- Intercept
- 18.46 m
- From
- 24.54 m
- To
- 43 m
- Intercept Depth
- 24.54 m
Classification
- Sample Type
- drill
- Group ID
- TP25-028:24.54-43
Location
- CRS
- NAD83/ UTM Zone 11N
QA/QC
- QA/QC Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-21T00:00:00.000Z
Reasoning: Expanded from assay table: 1.67 ppm silver, reported in a unit the rubric does not cover (g/t).
Negative factors
- Grade unit ppm does not match the silver rubric unit g/t; not scored.
Evidence · table
“1.67”
Context: TP25-028
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
TP25-028Tempiute · copperGrade: 0.12Grade Unit: %Intercept: 18.46 mView all detailsHide details
Identity
- Hole ID
- TP25-028
- Project
- Tempiute
- Commodity
- copper
- Region
- usa_nv
- Reported Region
- usa_nv
- Ticker
- GMET
Geometry
- Grade
- 0.12
- Grade Unit
- %
- Intercept
- 18.46 m
- From
- 24.54 m
- To
- 43 m
- Intercept Depth
- 24.54 m
Classification
- Sample Type
- drill
- Group ID
- TP25-028:24.54-43
Location
- CRS
- NAD83/ UTM Zone 11N
QA/QC
- QA/QC Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-21T00:00:00.000Z
Reasoning: Expanded from assay table. 0.12 % copper is below against the default band [2.5, 1, 0.5, 0.25] %. Grade×width 2.2 %·m is below.
Negative factors
- 0.12 % copper is below the weak threshold (0.25 %) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.12”
Context: TP25-028
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
incl.Tempiute · zincGrade: 0.06Grade Unit: %Intercept: 4.03 mView all detailsHide details
Identity
- Hole ID
- incl.
- Project
- Tempiute
- Commodity
- zinc
- Region
- usa_nv
- Reported Region
- usa_nv
- Ticker
- GMET
Geometry
- Grade
- 0.06
- Grade Unit
- %
- Intercept
- 4.03 m
- From
- 27.13 m
- To
- 31.16 m
- Intercept Depth
- 27.13 m
Classification
- Sample Type
- drill
- Group ID
- incl.:27.13-31.16
Location
- CRS
- NAD83/ UTM Zone 11N
QA/QC
- QA/QC Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-21T00:00:00.000Z
Reasoning: Expanded from assay table. 0.06 % zinc is below against the default band [18, 10, 5, 2] %. Grade×width 0.2 %·m is below.
Negative factors
- 0.06 % zinc is below the weak threshold (2 %) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.06”
Context: incl.
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
incl.Tempiute · silverGrade: 0.89Grade Unit: ppmIntercept: 4.03 mView all detailsHide details
Identity
- Hole ID
- incl.
- Project
- Tempiute
- Commodity
- silver
- Region
- usa_nv
- Reported Region
- usa_nv
- Ticker
- GMET
Geometry
- Grade
- 0.89
- Grade Unit
- ppm
- Intercept
- 4.03 m
- From
- 27.13 m
- To
- 31.16 m
- Intercept Depth
- 27.13 m
Classification
- Sample Type
- drill
- Group ID
- incl.:27.13-31.16
Location
- CRS
- NAD83/ UTM Zone 11N
QA/QC
- QA/QC Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-21T00:00:00.000Z
Reasoning: Expanded from assay table: 0.89 ppm silver, reported in a unit the rubric does not cover (g/t).
Negative factors
- Grade unit ppm does not match the silver rubric unit g/t; not scored.
Evidence · table
“0.89”
Context: incl.
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
incl.Tempiute · copperGrade: 0.07Grade Unit: %Intercept: 4.03 mView all detailsHide details
Identity
- Hole ID
- incl.
- Project
- Tempiute
- Commodity
- copper
- Region
- usa_nv
- Reported Region
- usa_nv
- Ticker
- GMET
Geometry
- Grade
- 0.07
- Grade Unit
- %
- Intercept
- 4.03 m
- From
- 27.13 m
- To
- 31.16 m
- Intercept Depth
- 27.13 m
Classification
- Sample Type
- drill
- Group ID
- incl.:27.13-31.16
Location
- CRS
- NAD83/ UTM Zone 11N
QA/QC
- QA/QC Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-21T00:00:00.000Z
Reasoning: Expanded from assay table. 0.07 % copper is below against the default band [2.5, 1, 0.5, 0.25] %. Grade×width 0.3 %·m is below.
Negative factors
- 0.07 % copper is below the weak threshold (0.25 %) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.07”
Context: incl.
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
plusTempiute · zincGrade: 0.03Grade Unit: %Intercept: 3.4 mView all detailsHide details
Identity
- Hole ID
- plus
- Project
- Tempiute
- Commodity
- zinc
- Region
- usa_nv
- Reported Region
- usa_nv
- Ticker
- GMET
Geometry
- Grade
- 0.03
- Grade Unit
- %
- Intercept
- 3.4 m
- From
- 39.6 m
- To
- 43 m
- Intercept Depth
- 39.6 m
Classification
- Sample Type
- drill
- Group ID
- plus:39.6-43
Location
- CRS
- NAD83/ UTM Zone 11N
QA/QC
- QA/QC Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-21T00:00:00.000Z
Reasoning: Expanded from assay table. 0.03 % zinc is below against the default band [18, 10, 5, 2] %. Grade×width 0.1 %·m is below.
Negative factors
- 0.03 % zinc is below the weak threshold (2 %) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.03”
Context: plus
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
plusTempiute · silverGrade: 1.08Grade Unit: ppmIntercept: 3.4 mView all detailsHide details
Identity
- Hole ID
- plus
- Project
- Tempiute
- Commodity
- silver
- Region
- usa_nv
- Reported Region
- usa_nv
- Ticker
- GMET
Geometry
- Grade
- 1.08
- Grade Unit
- ppm
- Intercept
- 3.4 m
- From
- 39.6 m
- To
- 43 m
- Intercept Depth
- 39.6 m
Classification
- Sample Type
- drill
- Group ID
- plus:39.6-43
Location
- CRS
- NAD83/ UTM Zone 11N
QA/QC
- QA/QC Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-21T00:00:00.000Z
Reasoning: Expanded from assay table: 1.08 ppm silver, reported in a unit the rubric does not cover (g/t).
Negative factors
- Grade unit ppm does not match the silver rubric unit g/t; not scored.
Evidence · table
“1.08”
Context: plus
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
plusTempiute · copperGrade: 0.09Grade Unit: %Intercept: 3.4 mView all detailsHide details
Identity
- Hole ID
- plus
- Project
- Tempiute
- Commodity
- copper
- Region
- usa_nv
- Reported Region
- usa_nv
- Ticker
- GMET
Geometry
- Grade
- 0.09
- Grade Unit
- %
- Intercept
- 3.4 m
- From
- 39.6 m
- To
- 43 m
- Intercept Depth
- 39.6 m
Classification
- Sample Type
- drill
- Group ID
- plus:39.6-43
Location
- CRS
- NAD83/ UTM Zone 11N
QA/QC
- QA/QC Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-21T00:00:00.000Z
Reasoning: Expanded from assay table. 0.09 % copper is below against the default band [2.5, 1, 0.5, 0.25] %. Grade×width 0.3 %·m is below.
Negative factors
- 0.09 % copper is below the weak threshold (0.25 %) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.09”
Context: plus
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
TP26-030Tempiute · zincGrade: 0.07Grade Unit: %Intercept: 6.71 mView all detailsHide details
Identity
- Hole ID
- TP26-030
- Project
- Tempiute
- Commodity
- zinc
- Region
- usa_nv
- Reported Region
- usa_nv
- Ticker
- GMET
Geometry
- Grade
- 0.07
- Grade Unit
- %
- Intercept
- 6.71 m
- From
- 40.08 m
- To
- 46.79 m
- Intercept Depth
- 40.08 m
Classification
- Sample Type
- drill
- Group ID
- TP26-030:40.08-46.79
Location
- CRS
- NAD83/ UTM Zone 11N
QA/QC
- QA/QC Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-21T00:00:00.000Z
Reasoning: Expanded from assay table. 0.07 % zinc is below against the default band [18, 10, 5, 2] %. Grade×width 0.5 %·m is below.
Negative factors
- 0.07 % zinc is below the weak threshold (2 %) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.07”
Context: TP26-030
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
TP26-030Tempiute · silverGrade: 1.98Grade Unit: ppmIntercept: 6.71 mView all detailsHide details
Identity
- Hole ID
- TP26-030
- Project
- Tempiute
- Commodity
- silver
- Region
- usa_nv
- Reported Region
- usa_nv
- Ticker
- GMET
Geometry
- Grade
- 1.98
- Grade Unit
- ppm
- Intercept
- 6.71 m
- From
- 40.08 m
- To
- 46.79 m
- Intercept Depth
- 40.08 m
Classification
- Sample Type
- drill
- Group ID
- TP26-030:40.08-46.79
Location
- CRS
- NAD83/ UTM Zone 11N
QA/QC
- QA/QC Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-21T00:00:00.000Z
Reasoning: Expanded from assay table: 1.98 ppm silver, reported in a unit the rubric does not cover (g/t).
Negative factors
- Grade unit ppm does not match the silver rubric unit g/t; not scored.
Evidence · table
“1.98”
Context: TP26-030
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
TP26-030Tempiute · copperGrade: 0.13Grade Unit: %Intercept: 6.71 mView all detailsHide details
Identity
- Hole ID
- TP26-030
- Project
- Tempiute
- Commodity
- copper
- Region
- usa_nv
- Reported Region
- usa_nv
- Ticker
- GMET
Geometry
- Grade
- 0.13
- Grade Unit
- %
- Intercept
- 6.71 m
- From
- 40.08 m
- To
- 46.79 m
- Intercept Depth
- 40.08 m
Classification
- Sample Type
- drill
- Group ID
- TP26-030:40.08-46.79
Location
- CRS
- NAD83/ UTM Zone 11N
QA/QC
- QA/QC Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-21T00:00:00.000Z
Reasoning: Expanded from assay table. 0.13 % copper is below against the default band [2.5, 1, 0.5, 0.25] %. Grade×width 0.9 %·m is below.
Negative factors
- 0.13 % copper is below the weak threshold (0.25 %) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.13”
Context: TP26-030
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
TP26-031Tempiute · zincGrade: 0.5Grade Unit: %Intercept: 14.01 mView all detailsHide details
Identity
- Hole ID
- TP26-031
- Project
- Tempiute
- Commodity
- zinc
- Region
- usa_nv
- Reported Region
- usa_nv
- Ticker
- GMET
Geometry
- Grade
- 0.5
- Grade Unit
- %
- Intercept
- 14.01 m
- From
- 59.45 m
- To
- 73.46 m
- Intercept Depth
- 59.45 m
Classification
- Sample Type
- drill
- Group ID
- TP26-031:59.45-73.46
Location
- CRS
- NAD83/ UTM Zone 11N
QA/QC
- QA/QC Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-21T00:00:00.000Z
Reasoning: Expanded from assay table. 0.5 % zinc is below against the default band [18, 10, 5, 2] %. Grade×width 7.0 %·m is below.
Negative factors
- 0.5 % zinc is below the weak threshold (2 %) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.50”
Context: TP26-031
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
TP26-031Tempiute · silverGrade: 4.72Grade Unit: ppmIntercept: 14.01 mView all detailsHide details
Identity
- Hole ID
- TP26-031
- Project
- Tempiute
- Commodity
- silver
- Region
- usa_nv
- Reported Region
- usa_nv
- Ticker
- GMET
Geometry
- Grade
- 4.72
- Grade Unit
- ppm
- Intercept
- 14.01 m
- From
- 59.45 m
- To
- 73.46 m
- Intercept Depth
- 59.45 m
Classification
- Sample Type
- drill
- Group ID
- TP26-031:59.45-73.46
Location
- CRS
- NAD83/ UTM Zone 11N
QA/QC
- QA/QC Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-21T00:00:00.000Z
Reasoning: Expanded from assay table: 4.72 ppm silver, reported in a unit the rubric does not cover (g/t).
Negative factors
- Grade unit ppm does not match the silver rubric unit g/t; not scored.
Evidence · table
“4.72”
Context: TP26-031
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
TP26-031Tempiute · copperGrade: 0.06Grade Unit: %Intercept: 14.01 mView all detailsHide details
Identity
- Hole ID
- TP26-031
- Project
- Tempiute
- Commodity
- copper
- Region
- usa_nv
- Reported Region
- usa_nv
- Ticker
- GMET
Geometry
- Grade
- 0.06
- Grade Unit
- %
- Intercept
- 14.01 m
- From
- 59.45 m
- To
- 73.46 m
- Intercept Depth
- 59.45 m
Classification
- Sample Type
- drill
- Group ID
- TP26-031:59.45-73.46
Location
- CRS
- NAD83/ UTM Zone 11N
QA/QC
- QA/QC Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-21T00:00:00.000Z
Reasoning: Expanded from assay table. 0.06 % copper is below against the default band [2.5, 1, 0.5, 0.25] %. Grade×width 0.8 %·m is below.
Negative factors
- 0.06 % copper is below the weak threshold (0.25 %) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.06”
Context: TP26-031
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
incl.Tempiute · zincGrade: 0.46Grade Unit: %Intercept: 5.77 mView all detailsHide details
Identity
- Hole ID
- incl.
- Project
- Tempiute
- Commodity
- zinc
- Region
- usa_nv
- Reported Region
- usa_nv
- Ticker
- GMET
Geometry
- Grade
- 0.46
- Grade Unit
- %
- Intercept
- 5.77 m
- From
- 67.69 m
- To
- 73.46 m
- Intercept Depth
- 67.69 m
Classification
- Sample Type
- drill
- Group ID
- incl.:67.69-73.46
Location
- CRS
- NAD83/ UTM Zone 11N
QA/QC
- QA/QC Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-21T00:00:00.000Z
Reasoning: Expanded from assay table. 0.46 % zinc is below against the default band [18, 10, 5, 2] %. Grade×width 2.7 %·m is below.
Negative factors
- 0.46 % zinc is below the weak threshold (2 %) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.46”
Context: incl.
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
incl.Tempiute · silverGrade: 8.07Grade Unit: ppmIntercept: 5.77 mView all detailsHide details
Identity
- Hole ID
- incl.
- Project
- Tempiute
- Commodity
- silver
- Region
- usa_nv
- Reported Region
- usa_nv
- Ticker
- GMET
Geometry
- Grade
- 8.07
- Grade Unit
- ppm
- Intercept
- 5.77 m
- From
- 67.69 m
- To
- 73.46 m
- Intercept Depth
- 67.69 m
Classification
- Sample Type
- drill
- Group ID
- incl.:67.69-73.46
Location
- CRS
- NAD83/ UTM Zone 11N
QA/QC
- QA/QC Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-21T00:00:00.000Z
Reasoning: Expanded from assay table: 8.07 ppm silver, reported in a unit the rubric does not cover (g/t).
Negative factors
- Grade unit ppm does not match the silver rubric unit g/t; not scored.
Evidence · table
“8.07”
Context: incl.
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
incl.Tempiute · copperGrade: 0.09Grade Unit: %Intercept: 5.77 mView all detailsHide details
Identity
- Hole ID
- incl.
- Project
- Tempiute
- Commodity
- copper
- Region
- usa_nv
- Reported Region
- usa_nv
- Ticker
- GMET
Geometry
- Grade
- 0.09
- Grade Unit
- %
- Intercept
- 5.77 m
- From
- 67.69 m
- To
- 73.46 m
- Intercept Depth
- 67.69 m
Classification
- Sample Type
- drill
- Group ID
- incl.:67.69-73.46
Location
- CRS
- NAD83/ UTM Zone 11N
QA/QC
- QA/QC Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-21T00:00:00.000Z
Reasoning: Expanded from assay table. 0.09 % copper is below against the default band [2.5, 1, 0.5, 0.25] %. Grade×width 0.5 %·m is below.
Negative factors
- 0.09 % copper is below the weak threshold (0.25 %) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.09”
Context: incl.
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
TP26-039Tempiute · zincGrade: 3.88Grade Unit: %Intercept: 3.57 mView all detailsHide details
Identity
- Hole ID
- TP26-039
- Project
- Tempiute
- Commodity
- zinc
- Region
- usa_nv
- Reported Region
- usa_nv
- Ticker
- GMET
Geometry
- Grade
- 3.88
- Grade Unit
- %
- Intercept
- 3.57 m
- From
- 297.83 m
- To
- 301.4 m
- Intercept Depth
- 297.83 m
Classification
- Sample Type
- drill
- Group ID
- TP26-039:297.83-301.4
Location
- CRS
- NAD83/ UTM Zone 11N
QA/QC
- QA/QC Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-21T00:00:00.000Z
Reasoning: Expanded from assay table. 3.88 % zinc is weak against the default band [18, 10, 5, 2] %. Grade×width 13.9 %·m is below (grade alone is weak; the better of the two is used).
Negative factors
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“3.88”
Context: TP26-039
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
TP26-039Tempiute · silverGrade: 0.25Grade Unit: ppmIntercept: 3.57 mView all detailsHide details
Identity
- Hole ID
- TP26-039
- Project
- Tempiute
- Commodity
- silver
- Region
- usa_nv
- Reported Region
- usa_nv
- Ticker
- GMET
Geometry
- Grade
- 0.25
- Grade Unit
- ppm
- Intercept
- 3.57 m
- From
- 297.83 m
- To
- 301.4 m
- Intercept Depth
- 297.83 m
Classification
- Sample Type
- drill
- Group ID
- TP26-039:297.83-301.4
Location
- CRS
- NAD83/ UTM Zone 11N
QA/QC
- QA/QC Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-21T00:00:00.000Z
Reasoning: Expanded from assay table: 0.25 ppm silver, reported in a unit the rubric does not cover (g/t).
Negative factors
- Grade unit ppm does not match the silver rubric unit g/t; not scored.
Evidence · table
“0.25”
Context: TP26-039
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
TP26-039Tempiute · copperGrade: 0.01Grade Unit: %Intercept: 3.57 mView all detailsHide details
Identity
- Hole ID
- TP26-039
- Project
- Tempiute
- Commodity
- copper
- Region
- usa_nv
- Reported Region
- usa_nv
- Ticker
- GMET
Geometry
- Grade
- 0.01
- Grade Unit
- %
- Intercept
- 3.57 m
- From
- 297.83 m
- To
- 301.4 m
- Intercept Depth
- 297.83 m
Classification
- Sample Type
- drill
- Group ID
- TP26-039:297.83-301.4
Location
- CRS
- NAD83/ UTM Zone 11N
QA/QC
- QA/QC Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-21T00:00:00.000Z
Reasoning: Expanded from assay table. 0.01 % copper is below against the default band [2.5, 1, 0.5, 0.25] %. Grade×width 0.0 %·m is below.
Negative factors
- 0.01 % copper is below the weak threshold (0.25 %) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.01”
Context: TP26-039
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
TP26-041Tempiute · zincGrade: 0.06Grade Unit: %Intercept: 3 mView all detailsHide details
Identity
- Hole ID
- TP26-041
- Project
- Tempiute
- Commodity
- zinc
- Region
- usa_nv
- Reported Region
- usa_nv
- Ticker
- GMET
Geometry
- Grade
- 0.06
- Grade Unit
- %
- Intercept
- 3 m
- From
- 3 m
- To
- 6 m
- Intercept Depth
- 3 m
Classification
- Sample Type
- drill
- Group ID
- TP26-041:3-6
Location
- CRS
- NAD83/ UTM Zone 11N
QA/QC
- QA/QC Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-21T00:00:00.000Z
Reasoning: Expanded from assay table. 0.06 % zinc is below against the default band [18, 10, 5, 2] %. Grade×width 0.2 %·m is below.
Negative factors
- 0.06 % zinc is below the weak threshold (2 %) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.06”
Context: TP26-041
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
TP26-041Tempiute · silverGrade: 1.18Grade Unit: ppmIntercept: 3 mView all detailsHide details
Identity
- Hole ID
- TP26-041
- Project
- Tempiute
- Commodity
- silver
- Region
- usa_nv
- Reported Region
- usa_nv
- Ticker
- GMET
Geometry
- Grade
- 1.18
- Grade Unit
- ppm
- Intercept
- 3 m
- From
- 3 m
- To
- 6 m
- Intercept Depth
- 3 m
Classification
- Sample Type
- drill
- Group ID
- TP26-041:3-6
Location
- CRS
- NAD83/ UTM Zone 11N
QA/QC
- QA/QC Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-21T00:00:00.000Z
Reasoning: Expanded from assay table: 1.18 ppm silver, reported in a unit the rubric does not cover (g/t).
Negative factors
- Grade unit ppm does not match the silver rubric unit g/t; not scored.
Evidence · table
“1.18”
Context: TP26-041
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
TP26-041Tempiute · copperGrade: 0.03Grade Unit: %Intercept: 3 mView all detailsHide details
Identity
- Hole ID
- TP26-041
- Project
- Tempiute
- Commodity
- copper
- Region
- usa_nv
- Reported Region
- usa_nv
- Ticker
- GMET
Geometry
- Grade
- 0.03
- Grade Unit
- %
- Intercept
- 3 m
- From
- 3 m
- To
- 6 m
- Intercept Depth
- 3 m
Classification
- Sample Type
- drill
- Group ID
- TP26-041:3-6
Location
- CRS
- NAD83/ UTM Zone 11N
QA/QC
- QA/QC Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-21T00:00:00.000Z
Reasoning: Expanded from assay table. 0.03 % copper is below against the default band [2.5, 1, 0.5, 0.25] %. Grade×width 0.1 %·m is below.
Negative factors
- 0.03 % copper is below the weak threshold (0.25 %) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.03”
Context: TP26-041
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
How Atlas produces this analysis
Minestarters Atlas uses automated extraction to summarize mining announcements, identify reported measurements, and classify supporting evidence. Sentiment reflects the extracted narrative and classification rules; it is an interpretation, not a reported measurement. Evidence quotes and context are provided where available. Missing data, low-confidence results, and review flags indicate limitations. Check the original publisher announcement before relying on an interpretation.