NorthWest Intersects 31.4 Metres of 0.92% Copper and 1.08 g/t Gold (2.11% CuEq) at Kwanika in the Pit Zone from 78 Metres
Original announcement by globenewswire on
- Company
- NorthWest Copper Corp.
- Ticker
- NWST
- Exchange
- Unavailable
- Region
- British Columbia
- Primary commodity
- Copper
- Secondary commodities
- Gold, Silver, Palladium
- Document categories
- Drill results, Resource update
- Extracted
- 2026-10-14 13:16:08 UTC
Analysis by Minestarters Atlas
Atlas analysis published:
Minestarters Atlas analysis
Summary
NorthWest Copper Corp. reported drill results from the Pit Zone at the Kwanika project in British Columbia, highlighted by a 31.4m intercept of 0.92% Cu and 1.08 g/t Au. The drilling successfully extended mineralization up-dip and east, while reducing drill spacing to approximately 50 metres to support resource upgrading.
Reasoning: The results show strong grade continuity and extension of mineralization in a high-grade zone, supporting the company's objective to upgrade mineral resources.
Positive factors
- Strong copper-gold grades in the high-grade Pit Zone
- Mineralization extended up-dip toward the overburden contact
- Incremental extensions to multiple mineralized trends
- Reduction in drill hole spacing to support resource upgrading
Facts used in scoring: 36
Classification and evidence
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: Release includes details on QA/QC procedures, including blanks, standards, and certified laboratory (Actlabs).
Evidence · text
“an external QA/QC program was implemented using coarse blanks and certified prepared blanks and standards”
Step-Out Extensionpositive
Mineralization extended beyond the previously known limit.
Why it applies: Mineralization was extended up-dip toward the overburden contact.
Evidence · text
“Higher-grade mineralization extended approximately 25 to 50 metres up-dip to the overburden contact”
Extracted facts
Stored fact records: 36. Some facts used in scoring do not have a stored record.
Drill Results (36)
K-26-306Kwanika North · copperGrade: 0.64Grade Unit: %Intercept: 39 mView all detailsHide details
Identity
- Hole ID
- K-26-306
- Project
- Kwanika North
- Commodity
- copper
- Region
- canada_bc
- Reported Region
- canada_bc
- Ticker
- NWST
Geometry
- Grade
- 0.64
- Grade Unit
- %
- Intercept
- 39 m
- True Width
- 31.9 m
- From
- 39 m
- To
- 78 m
- Hole Depth
- 120 m
- Intercept Depth
- 39 m
Classification
- Sample Type
- drill
- Group ID
- K-26-306:39-78
- Mining Method
- open_pit
Location
- Location
- Pit
- Elevation
- 989 m
- Azimuth
- 275 °
- Dip
- -60 °
- Loc. Source
- document
QA/QC
- Laboratory
- Actlabs
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Metal Equivalent
- Metal Eq. Grade
- 1.04
- Metal Eq. Unit
- % Cu-Eq
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-10-14T00:00:00.000Z
Reasoning: Moderate grade intercept in the Pit Zone.
Evidence · table
“0.64”
Context: 39.0
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 31.9
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Metal Equivalent Opaquenegative
Metal equivalent grade reported without disclosing the price, recovery, or payability assumptions used.
Why it applies: an equivalent grade is reported without its assumptions
K-26-306Kwanika North · goldGrade: 0.35Grade Unit: g/tIntercept: 39 mView all detailsHide details
Identity
- Hole ID
- K-26-306
- Project
- Kwanika North
- Commodity
- gold
- Region
- canada_bc
- Reported Region
- canada_bc
- Ticker
- NWST
Geometry
- Grade
- 0.35
- Grade Unit
- g/t
- Intercept
- 39 m
- True Width
- 31.9 m
- From
- 39 m
- To
- 78 m
- Hole Depth
- 120 m
- Intercept Depth
- 39 m
Classification
- Sample Type
- drill
- Group ID
- K-26-306:39-78
- Mining Method
- open_pit
Location
- Location
- Pit
- Elevation
- 989 m
- Azimuth
- 275 °
- Dip
- -60 °
- Loc. Source
- document
QA/QC
- Laboratory
- Actlabs
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Metal Equivalent
- Metal Eq. Grade
- 1.04
- Metal Eq. Unit
- % Cu-Eq
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-10-14T00:00:00.000Z
Reasoning: Low grade gold intercept.
Evidence · table
“0.35”
Context: 39.0
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 31.9
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Metal Equivalent Opaquenegative
Metal equivalent grade reported without disclosing the price, recovery, or payability assumptions used.
Why it applies: an equivalent grade is reported without its assumptions
K-26-306Kwanika North · copperGrade: 0.92Grade Unit: %Intercept: 31.4 mView all detailsHide details
Identity
- Hole ID
- K-26-306
- Project
- Kwanika North
- Commodity
- copper
- Region
- canada_bc
- Reported Region
- canada_bc
- Ticker
- NWST
Geometry
- Grade
- 0.92
- Grade Unit
- %
- Intercept
- 31.4 m
- True Width
- 25.7 m
- From
- 78 m
- To
- 109.4 m
- Hole Depth
- 120 m
- Intercept Depth
- 78 m
Classification
- Sample Type
- drill
- Group ID
- K-26-306:78-109.4
- Mining Method
- open_pit
Location
- Location
- Pit
- Elevation
- 989 m
- Azimuth
- 275 °
- Dip
- -60 °
- Loc. Source
- document
QA/QC
- Laboratory
- Actlabs
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Metal Equivalent
- Metal Eq. Grade
- 2.11
- Metal Eq. Unit
- % Cu-Eq
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-10-14T00:00:00.000Z
Reasoning: Strong copper grade intercept in the Pit Zone.
Evidence · table
“0.92”
Context: 31.4
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 25.7
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Metal Equivalent Opaquenegative
Metal equivalent grade reported without disclosing the price, recovery, or payability assumptions used.
Why it applies: an equivalent grade is reported without its assumptions
K-26-306Kwanika North · goldGrade: 1.08Grade Unit: g/tIntercept: 31.4 mView all detailsHide details
Identity
- Hole ID
- K-26-306
- Project
- Kwanika North
- Commodity
- gold
- Region
- canada_bc
- Reported Region
- canada_bc
- Ticker
- NWST
Geometry
- Grade
- 1.08
- Grade Unit
- g/t
- Intercept
- 31.4 m
- True Width
- 25.7 m
- From
- 78 m
- To
- 109.4 m
- Hole Depth
- 120 m
- Intercept Depth
- 78 m
Classification
- Sample Type
- drill
- Group ID
- K-26-306:78-109.4
- Mining Method
- open_pit
Location
- Location
- Pit
- Elevation
- 989 m
- Azimuth
- 275 °
- Dip
- -60 °
- Loc. Source
- document
QA/QC
- Laboratory
- Actlabs
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Metal Equivalent
- Metal Eq. Grade
- 2.11
- Metal Eq. Unit
- % Cu-Eq
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-10-14T00:00:00.000Z
Reasoning: Strong gold grade intercept in the Pit Zone.
Evidence · table
“1.08”
Context: 31.4
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 25.7
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Metal Equivalent Opaquenegative
Metal equivalent grade reported without disclosing the price, recovery, or payability assumptions used.
Why it applies: an equivalent grade is reported without its assumptions
K-26-306Kwanika North · copperGrade: 0.61Grade Unit: %Intercept: 10.6 mView all detailsHide details
Identity
- Hole ID
- K-26-306
- Project
- Kwanika North
- Commodity
- copper
- Region
- canada_bc
- Reported Region
- canada_bc
- Ticker
- NWST
Geometry
- Grade
- 0.61
- Grade Unit
- %
- Intercept
- 10.6 m
- True Width
- 8.7 m
- From
- 109.4 m
- To
- 120 m
- Hole Depth
- 120 m
- Intercept Depth
- 109.4 m
Classification
- Sample Type
- drill
- Group ID
- K-26-306:109.4-120
- Mining Method
- open_pit
Location
- Location
- Pit
- Elevation
- 989 m
- Azimuth
- 275 °
- Dip
- -60 °
- Loc. Source
- document
QA/QC
- Laboratory
- Actlabs
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Metal Equivalent
- Metal Eq. Grade
- 0.87
- Metal Eq. Unit
- % Cu-Eq
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-10-14T00:00:00.000Z
Reasoning: Lower grade copper intercept.
Evidence · table
“0.61”
Context: 10.6
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 8.7
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Metal Equivalent Opaquenegative
Metal equivalent grade reported without disclosing the price, recovery, or payability assumptions used.
Why it applies: an equivalent grade is reported without its assumptions
K-26-306Kwanika North · goldGrade: 0.22Grade Unit: g/tIntercept: 10.6 mView all detailsHide details
Identity
- Hole ID
- K-26-306
- Project
- Kwanika North
- Commodity
- gold
- Region
- canada_bc
- Reported Region
- canada_bc
- Ticker
- NWST
Geometry
- Grade
- 0.22
- Grade Unit
- g/t
- Intercept
- 10.6 m
- True Width
- 8.7 m
- From
- 109.4 m
- To
- 120 m
- Hole Depth
- 120 m
- Intercept Depth
- 109.4 m
Classification
- Sample Type
- drill
- Group ID
- K-26-306:109.4-120
- Mining Method
- open_pit
Location
- Location
- Pit
- Elevation
- 989 m
- Azimuth
- 275 °
- Dip
- -60 °
- Loc. Source
- document
QA/QC
- Laboratory
- Actlabs
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Metal Equivalent
- Metal Eq. Grade
- 0.87
- Metal Eq. Unit
- % Cu-Eq
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-10-14T00:00:00.000Z
Reasoning: Low grade gold intercept.
Evidence · table
“0.22”
Context: 10.6
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 8.7
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Metal Equivalent Opaquenegative
Metal equivalent grade reported without disclosing the price, recovery, or payability assumptions used.
Why it applies: an equivalent grade is reported without its assumptions
K-26-326Kwanika North · copperGrade: 0.66Grade Unit: %Intercept: 16.6 mView all detailsHide details
Identity
- Hole ID
- K-26-326
- Project
- Kwanika North
- Commodity
- copper
- Region
- canada_bc
- Reported Region
- canada_bc
- Ticker
- NWST
Geometry
- Grade
- 0.66
- Grade Unit
- %
- Intercept
- 16.6 m
- True Width
- 15 m
- From
- 58.9 m
- To
- 75.5 m
- Hole Depth
- 201 m
- Intercept Depth
- 58.9 m
Classification
- Sample Type
- drill
- Group ID
- K-26-326:58.9-75.5
- Mining Method
- open_pit
Location
- Location
- Pit
- Elevation
- 1007 m
- Azimuth
- 270 °
- Dip
- -50 °
- Loc. Source
- document
QA/QC
- Laboratory
- Actlabs
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Metal Equivalent
- Metal Eq. Grade
- 1.2
- Metal Eq. Unit
- % Cu-Eq
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-10-14T00:00:00.000Z
Reasoning: Strong copper grade intercept in the Pit Zone.
Evidence · table
“0.66”
Context: 16.6
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 15
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Metal Equivalent Opaquenegative
Metal equivalent grade reported without disclosing the price, recovery, or payability assumptions used.
Why it applies: an equivalent grade is reported without its assumptions
K-26-326Kwanika North · goldGrade: 0.47Grade Unit: g/tIntercept: 16.6 mView all detailsHide details
Identity
- Hole ID
- K-26-326
- Project
- Kwanika North
- Commodity
- gold
- Region
- canada_bc
- Reported Region
- canada_bc
- Ticker
- NWST
Geometry
- Grade
- 0.47
- Grade Unit
- g/t
- Intercept
- 16.6 m
- True Width
- 15 m
- From
- 58.9 m
- To
- 75.5 m
- Hole Depth
- 201 m
- Intercept Depth
- 58.9 m
Classification
- Sample Type
- drill
- Group ID
- K-26-326:58.9-75.5
- Mining Method
- open_pit
Location
- Location
- Pit
- Elevation
- 1007 m
- Azimuth
- 270 °
- Dip
- -50 °
- Loc. Source
- document
QA/QC
- Laboratory
- Actlabs
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Metal Equivalent
- Metal Eq. Grade
- 1.2
- Metal Eq. Unit
- % Cu-Eq
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-10-14T00:00:00.000Z
Reasoning: Strong gold grade intercept in the Pit Zone.
Evidence · table
“0.47”
Context: 16.6
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 15
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Metal Equivalent Opaquenegative
Metal equivalent grade reported without disclosing the price, recovery, or payability assumptions used.
Why it applies: an equivalent grade is reported without its assumptions
K-26-306Kwanika North · silverGrade: 1.86Grade Unit: g/tIntercept: 39 mView all detailsHide details
Identity
- Hole ID
- K-26-306
- Project
- Kwanika North
- Commodity
- silver
- Region
- canada_bc
- Reported Region
- canada_bc
- Ticker
- NWST
Geometry
- Grade
- 1.86
- Grade Unit
- g/t
- Intercept
- 39 m
- True Width
- 31.9 m
- From
- 39 m
- To
- 78 m
- Hole Depth
- 120 m
- Intercept Depth
- 39 m
Classification
- Sample Type
- drill
- Group ID
- K-26-306:39-78
- Mining Method
- open_pit
QA/QC
- Laboratory
- Actlabs
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Metal Equivalent
- Metal Eq. Grade
- 1.04
- Metal Eq. Unit
- % Cu-Eq
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-10-14T00:00:00.000Z
Reasoning: Expanded from assay table. 1.86 g/t silver is below against the default band [500, 200, 100, 30] g/t. Grade×width 72.5 g/t·m is below.
Negative factors
- 1.86 g/t silver is below the weak threshold (30 g/t) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“1.86”
Context: K-26-306
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 31.9
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Metal Equivalent Opaquenegative
Metal equivalent grade reported without disclosing the price, recovery, or payability assumptions used.
Why it applies: an equivalent grade is reported without its assumptions
K-26-306Kwanika North · palladiumGrade: 0Grade Unit: g/tIntercept: 39 mView all detailsHide details
Identity
- Hole ID
- K-26-306
- Project
- Kwanika North
- Commodity
- palladium
- Region
- canada_bc
- Reported Region
- canada_bc
- Ticker
- NWST
Geometry
- Grade
- 0
- Grade Unit
- g/t
- Intercept
- 39 m
- True Width
- 31.9 m
- From
- 39 m
- To
- 78 m
- Hole Depth
- 120 m
- Intercept Depth
- 39 m
Classification
- Sample Type
- drill
- Group ID
- K-26-306:39-78
- Mining Method
- open_pit
QA/QC
- Laboratory
- Actlabs
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Metal Equivalent
- Metal Eq. Grade
- 1.04
- Metal Eq. Unit
- % Cu-Eq
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-10-14T00:00:00.000Z
Reasoning: Expanded from assay table: 0 g/t palladium. No grade band defined for this commodity, so the score is a placeholder.
Negative factors
- No grade rubric for palladium; intercept not scored.
Evidence · table
“0.00”
Context: K-26-306
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 31.9
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Metal Equivalent Opaquenegative
Metal equivalent grade reported without disclosing the price, recovery, or payability assumptions used.
Why it applies: an equivalent grade is reported without its assumptions
K-26-306Kwanika North · silverGrade: 2.62Grade Unit: g/tIntercept: 31.4 mView all detailsHide details
Identity
- Hole ID
- K-26-306
- Project
- Kwanika North
- Commodity
- silver
- Region
- canada_bc
- Reported Region
- canada_bc
- Ticker
- NWST
Geometry
- Grade
- 2.62
- Grade Unit
- g/t
- Intercept
- 31.4 m
- True Width
- 25.7 m
- From
- 78 m
- To
- 109.4 m
- Hole Depth
- 120 m
- Intercept Depth
- 78 m
Classification
- Sample Type
- drill
- Group ID
- K-26-306:78-109.4
- Mining Method
- open_pit
QA/QC
- Laboratory
- Actlabs
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Metal Equivalent
- Metal Eq. Grade
- 2.11
- Metal Eq. Unit
- % Cu-Eq
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-10-14T00:00:00.000Z
Reasoning: Expanded from assay table. 2.62 g/t silver is below against the default band [500, 200, 100, 30] g/t. Grade×width 82.3 g/t·m is below.
Negative factors
- 2.62 g/t silver is below the weak threshold (30 g/t) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“2.62”
Context: K-26-306
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 25.7
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Metal Equivalent Opaquenegative
Metal equivalent grade reported without disclosing the price, recovery, or payability assumptions used.
Why it applies: an equivalent grade is reported without its assumptions
K-26-306Kwanika North · palladiumGrade: 0.03Grade Unit: g/tIntercept: 31.4 mView all detailsHide details
Identity
- Hole ID
- K-26-306
- Project
- Kwanika North
- Commodity
- palladium
- Region
- canada_bc
- Reported Region
- canada_bc
- Ticker
- NWST
Geometry
- Grade
- 0.03
- Grade Unit
- g/t
- Intercept
- 31.4 m
- True Width
- 25.7 m
- From
- 78 m
- To
- 109.4 m
- Hole Depth
- 120 m
- Intercept Depth
- 78 m
Classification
- Sample Type
- drill
- Group ID
- K-26-306:78-109.4
- Mining Method
- open_pit
QA/QC
- Laboratory
- Actlabs
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Metal Equivalent
- Metal Eq. Grade
- 2.11
- Metal Eq. Unit
- % Cu-Eq
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-10-14T00:00:00.000Z
Reasoning: Expanded from assay table: 0.03 g/t palladium. No grade band defined for this commodity, so the score is a placeholder.
Negative factors
- No grade rubric for palladium; intercept not scored.
Evidence · table
“0.03”
Context: K-26-306
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 25.7
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Metal Equivalent Opaquenegative
Metal equivalent grade reported without disclosing the price, recovery, or payability assumptions used.
Why it applies: an equivalent grade is reported without its assumptions
K-26-306Kwanika North · silverGrade: 1.87Grade Unit: g/tIntercept: 10.6 mView all detailsHide details
Identity
- Hole ID
- K-26-306
- Project
- Kwanika North
- Commodity
- silver
- Region
- canada_bc
- Reported Region
- canada_bc
- Ticker
- NWST
Geometry
- Grade
- 1.87
- Grade Unit
- g/t
- Intercept
- 10.6 m
- True Width
- 8.7 m
- From
- 109.4 m
- To
- 120 m
- Hole Depth
- 120 m
- Intercept Depth
- 109.4 m
Classification
- Sample Type
- drill
- Group ID
- K-26-306:109.4-120
- Mining Method
- open_pit
QA/QC
- Laboratory
- Actlabs
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Metal Equivalent
- Metal Eq. Grade
- 0.87
- Metal Eq. Unit
- % Cu-Eq
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-10-14T00:00:00.000Z
Reasoning: Expanded from assay table. 1.87 g/t silver is below against the default band [500, 200, 100, 30] g/t. Grade×width 19.8 g/t·m is below.
Negative factors
- 1.87 g/t silver is below the weak threshold (30 g/t) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“1.87”
Context: K-26-306
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 8.7
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Metal Equivalent Opaquenegative
Metal equivalent grade reported without disclosing the price, recovery, or payability assumptions used.
Why it applies: an equivalent grade is reported without its assumptions
K-26-306Kwanika North · palladiumGrade: 0Grade Unit: g/tIntercept: 10.6 mView all detailsHide details
Identity
- Hole ID
- K-26-306
- Project
- Kwanika North
- Commodity
- palladium
- Region
- canada_bc
- Reported Region
- canada_bc
- Ticker
- NWST
Geometry
- Grade
- 0
- Grade Unit
- g/t
- Intercept
- 10.6 m
- True Width
- 8.7 m
- From
- 109.4 m
- To
- 120 m
- Hole Depth
- 120 m
- Intercept Depth
- 109.4 m
Classification
- Sample Type
- drill
- Group ID
- K-26-306:109.4-120
- Mining Method
- open_pit
QA/QC
- Laboratory
- Actlabs
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Metal Equivalent
- Metal Eq. Grade
- 0.87
- Metal Eq. Unit
- % Cu-Eq
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-10-14T00:00:00.000Z
Reasoning: Expanded from assay table: 0 g/t palladium. No grade band defined for this commodity, so the score is a placeholder.
Negative factors
- No grade rubric for palladium; intercept not scored.
Evidence · table
“0.00”
Context: K-26-306
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 8.7
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Metal Equivalent Opaquenegative
Metal equivalent grade reported without disclosing the price, recovery, or payability assumptions used.
Why it applies: an equivalent grade is reported without its assumptions
K-26-309Kwanika North · copperGrade: 0.29Grade Unit: %Intercept: 2.7 mView all detailsHide details
Identity
- Hole ID
- K-26-309
- Project
- Kwanika North
- Commodity
- copper
- Region
- canada_bc
- Reported Region
- canada_bc
- Ticker
- NWST
Geometry
- Grade
- 0.29
- Grade Unit
- %
- Intercept
- 2.7 m
- True Width
- 2 m
- From
- 70.6 m
- To
- 73.2 m
- Hole Depth
- 120 m
- Intercept Depth
- 70.6 m
Classification
- Sample Type
- drill
- Group ID
- K-26-309:70.6-73.2
- Mining Method
- open_pit
QA/QC
- Laboratory
- Actlabs
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Metal Equivalent
- Metal Eq. Grade
- 0.53
- Metal Eq. Unit
- % Cu-Eq
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-10-14T00:00:00.000Z
Reasoning: Expanded from assay table. 0.29 % copper is weak against the default band [2.5, 1, 0.5, 0.25] %. Grade×width 0.8 %·m is below (grade alone is weak; the better of the two is used).
Negative factors
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.29”
Context: K-26-309
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 2
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Metal Equivalent Opaquenegative
Metal equivalent grade reported without disclosing the price, recovery, or payability assumptions used.
Why it applies: an equivalent grade is reported without its assumptions
K-26-309Kwanika North · goldGrade: 0.21Grade Unit: g/tIntercept: 2.7 mView all detailsHide details
Identity
- Hole ID
- K-26-309
- Project
- Kwanika North
- Commodity
- gold
- Region
- canada_bc
- Reported Region
- canada_bc
- Ticker
- NWST
Geometry
- Grade
- 0.21
- Grade Unit
- g/t
- Intercept
- 2.7 m
- True Width
- 2 m
- From
- 70.6 m
- To
- 73.2 m
- Hole Depth
- 120 m
- Intercept Depth
- 70.6 m
Classification
- Sample Type
- drill
- Group ID
- K-26-309:70.6-73.2
- Mining Method
- open_pit
QA/QC
- Laboratory
- Actlabs
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Metal Equivalent
- Metal Eq. Grade
- 0.53
- Metal Eq. Unit
- % Cu-Eq
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-10-14T00:00:00.000Z
Reasoning: Expanded from assay table. 0.21 g/t gold is below against the open_pit mining band [5, 2, 1, 0.3] g/t. Grade×width 0.6 g/t·m is below.
Negative factors
- 0.21 g/t gold is below the weak threshold (0.3 g/t) on the open_pit mining band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.21”
Context: K-26-309
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 2
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Metal Equivalent Opaquenegative
Metal equivalent grade reported without disclosing the price, recovery, or payability assumptions used.
Why it applies: an equivalent grade is reported without its assumptions
K-26-309Kwanika North · silverGrade: 2.28Grade Unit: g/tIntercept: 2.7 mView all detailsHide details
Identity
- Hole ID
- K-26-309
- Project
- Kwanika North
- Commodity
- silver
- Region
- canada_bc
- Reported Region
- canada_bc
- Ticker
- NWST
Geometry
- Grade
- 2.28
- Grade Unit
- g/t
- Intercept
- 2.7 m
- True Width
- 2 m
- From
- 70.6 m
- To
- 73.2 m
- Hole Depth
- 120 m
- Intercept Depth
- 70.6 m
Classification
- Sample Type
- drill
- Group ID
- K-26-309:70.6-73.2
- Mining Method
- open_pit
QA/QC
- Laboratory
- Actlabs
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Metal Equivalent
- Metal Eq. Grade
- 0.53
- Metal Eq. Unit
- % Cu-Eq
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-10-14T00:00:00.000Z
Reasoning: Expanded from assay table. 2.28 g/t silver is below against the default band [500, 200, 100, 30] g/t. Grade×width 6.2 g/t·m is below.
Negative factors
- 2.28 g/t silver is below the weak threshold (30 g/t) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“2.28”
Context: K-26-309
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 2
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Metal Equivalent Opaquenegative
Metal equivalent grade reported without disclosing the price, recovery, or payability assumptions used.
Why it applies: an equivalent grade is reported without its assumptions
K-26-309Kwanika North · palladiumGrade: 0Grade Unit: g/tIntercept: 2.7 mView all detailsHide details
Identity
- Hole ID
- K-26-309
- Project
- Kwanika North
- Commodity
- palladium
- Region
- canada_bc
- Reported Region
- canada_bc
- Ticker
- NWST
Geometry
- Grade
- 0
- Grade Unit
- g/t
- Intercept
- 2.7 m
- True Width
- 2 m
- From
- 70.6 m
- To
- 73.2 m
- Hole Depth
- 120 m
- Intercept Depth
- 70.6 m
Classification
- Sample Type
- drill
- Group ID
- K-26-309:70.6-73.2
- Mining Method
- open_pit
QA/QC
- Laboratory
- Actlabs
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Metal Equivalent
- Metal Eq. Grade
- 0.53
- Metal Eq. Unit
- % Cu-Eq
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-10-14T00:00:00.000Z
Reasoning: Expanded from assay table: 0 g/t palladium. No grade band defined for this commodity, so the score is a placeholder.
Negative factors
- No grade rubric for palladium; intercept not scored.
Evidence · table
“0.00”
Context: K-26-309
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 2
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Metal Equivalent Opaquenegative
Metal equivalent grade reported without disclosing the price, recovery, or payability assumptions used.
Why it applies: an equivalent grade is reported without its assumptions
K-26-326Kwanika North · copperGrade: 0.37Grade Unit: %Intercept: 8.5 mView all detailsHide details
Identity
- Hole ID
- K-26-326
- Project
- Kwanika North
- Commodity
- copper
- Region
- canada_bc
- Reported Region
- canada_bc
- Ticker
- NWST
Geometry
- Grade
- 0.37
- Grade Unit
- %
- Intercept
- 8.5 m
- True Width
- 7.7 m
- From
- 41.5 m
- To
- 50 m
- Hole Depth
- 120 m
- Intercept Depth
- 41.5 m
Classification
- Sample Type
- drill
- Group ID
- K-26-326:41.5-50
- Mining Method
- open_pit
QA/QC
- Laboratory
- Actlabs
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Metal Equivalent
- Metal Eq. Grade
- 0.6
- Metal Eq. Unit
- % Cu-Eq
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-10-14T00:00:00.000Z
Reasoning: Expanded from assay table. 0.37 % copper is weak against the default band [2.5, 1, 0.5, 0.25] %. Grade×width 3.1 %·m is below (grade alone is weak; the better of the two is used).
Negative factors
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.37”
Context: K-26-326
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 7.7
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Metal Equivalent Opaquenegative
Metal equivalent grade reported without disclosing the price, recovery, or payability assumptions used.
Why it applies: an equivalent grade is reported without its assumptions
K-26-326Kwanika North · goldGrade: 0.21Grade Unit: g/tIntercept: 8.5 mView all detailsHide details
Identity
- Hole ID
- K-26-326
- Project
- Kwanika North
- Commodity
- gold
- Region
- canada_bc
- Reported Region
- canada_bc
- Ticker
- NWST
Geometry
- Grade
- 0.21
- Grade Unit
- g/t
- Intercept
- 8.5 m
- True Width
- 7.7 m
- From
- 41.5 m
- To
- 50 m
- Hole Depth
- 120 m
- Intercept Depth
- 41.5 m
Classification
- Sample Type
- drill
- Group ID
- K-26-326:41.5-50
- Mining Method
- open_pit
QA/QC
- Laboratory
- Actlabs
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Metal Equivalent
- Metal Eq. Grade
- 0.6
- Metal Eq. Unit
- % Cu-Eq
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-10-14T00:00:00.000Z
Reasoning: Expanded from assay table. 0.21 g/t gold is below against the open_pit mining band [5, 2, 1, 0.3] g/t. Grade×width 1.8 g/t·m is below.
Negative factors
- 0.21 g/t gold is below the weak threshold (0.3 g/t) on the open_pit mining band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.21”
Context: K-26-326
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 7.7
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Metal Equivalent Opaquenegative
Metal equivalent grade reported without disclosing the price, recovery, or payability assumptions used.
Why it applies: an equivalent grade is reported without its assumptions
K-26-326Kwanika North · silverGrade: 0.63Grade Unit: g/tIntercept: 8.5 mView all detailsHide details
Identity
- Hole ID
- K-26-326
- Project
- Kwanika North
- Commodity
- silver
- Region
- canada_bc
- Reported Region
- canada_bc
- Ticker
- NWST
Geometry
- Grade
- 0.63
- Grade Unit
- g/t
- Intercept
- 8.5 m
- True Width
- 7.7 m
- From
- 41.5 m
- To
- 50 m
- Hole Depth
- 120 m
- Intercept Depth
- 41.5 m
Classification
- Sample Type
- drill
- Group ID
- K-26-326:41.5-50
- Mining Method
- open_pit
QA/QC
- Laboratory
- Actlabs
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Metal Equivalent
- Metal Eq. Grade
- 0.6
- Metal Eq. Unit
- % Cu-Eq
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-10-14T00:00:00.000Z
Reasoning: Expanded from assay table. 0.63 g/t silver is below against the default band [500, 200, 100, 30] g/t. Grade×width 5.4 g/t·m is below.
Negative factors
- 0.63 g/t silver is below the weak threshold (30 g/t) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.63”
Context: K-26-326
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 7.7
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Metal Equivalent Opaquenegative
Metal equivalent grade reported without disclosing the price, recovery, or payability assumptions used.
Why it applies: an equivalent grade is reported without its assumptions
K-26-326Kwanika North · palladiumGrade: 0Grade Unit: g/tIntercept: 8.5 mView all detailsHide details
Identity
- Hole ID
- K-26-326
- Project
- Kwanika North
- Commodity
- palladium
- Region
- canada_bc
- Reported Region
- canada_bc
- Ticker
- NWST
Geometry
- Grade
- 0
- Grade Unit
- g/t
- Intercept
- 8.5 m
- True Width
- 7.7 m
- From
- 41.5 m
- To
- 50 m
- Hole Depth
- 120 m
- Intercept Depth
- 41.5 m
Classification
- Sample Type
- drill
- Group ID
- K-26-326:41.5-50
- Mining Method
- open_pit
QA/QC
- Laboratory
- Actlabs
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Metal Equivalent
- Metal Eq. Grade
- 0.6
- Metal Eq. Unit
- % Cu-Eq
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-10-14T00:00:00.000Z
Reasoning: Expanded from assay table: 0 g/t palladium. No grade band defined for this commodity, so the score is a placeholder.
Negative factors
- No grade rubric for palladium; intercept not scored.
Evidence · table
“0.00”
Context: K-26-326
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 7.7
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Metal Equivalent Opaquenegative
Metal equivalent grade reported without disclosing the price, recovery, or payability assumptions used.
Why it applies: an equivalent grade is reported without its assumptions
K-26-326Kwanika North · copperGrade: 0.38Grade Unit: %Intercept: 64.1 mView all detailsHide details
Identity
- Hole ID
- K-26-326
- Project
- Kwanika North
- Commodity
- copper
- Region
- canada_bc
- Reported Region
- canada_bc
- Ticker
- NWST
Geometry
- Grade
- 0.38
- Grade Unit
- %
- Intercept
- 64.1 m
- True Width
- 58.1 m
- From
- 58.9 m
- To
- 123 m
- Hole Depth
- 120 m
- Intercept Depth
- 58.9 m
Classification
- Sample Type
- drill
- Group ID
- K-26-326:58.9-123
- Mining Method
- open_pit
QA/QC
- Laboratory
- Actlabs
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Metal Equivalent
- Metal Eq. Grade
- 0.61
- Metal Eq. Unit
- % Cu-Eq
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-10-14T00:00:00.000Z
Reasoning: Expanded from assay table. 0.38 % copper is weak against the default band [2.5, 1, 0.5, 0.25] %. Grade×width 24.4 %·m is weak.
Negative factors
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.38”
Context: K-26-326
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 58.1
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Metal Equivalent Opaquenegative
Metal equivalent grade reported without disclosing the price, recovery, or payability assumptions used.
Why it applies: an equivalent grade is reported without its assumptions
K-26-326Kwanika North · goldGrade: 0.2Grade Unit: g/tIntercept: 64.1 mView all detailsHide details
Identity
- Hole ID
- K-26-326
- Project
- Kwanika North
- Commodity
- gold
- Region
- canada_bc
- Reported Region
- canada_bc
- Ticker
- NWST
Geometry
- Grade
- 0.2
- Grade Unit
- g/t
- Intercept
- 64.1 m
- True Width
- 58.1 m
- From
- 58.9 m
- To
- 123 m
- Hole Depth
- 120 m
- Intercept Depth
- 58.9 m
Classification
- Sample Type
- drill
- Group ID
- K-26-326:58.9-123
- Mining Method
- open_pit
QA/QC
- Laboratory
- Actlabs
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Metal Equivalent
- Metal Eq. Grade
- 0.61
- Metal Eq. Unit
- % Cu-Eq
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-10-14T00:00:00.000Z
Reasoning: Expanded from assay table. 0.2 g/t gold is weak against the open_pit mining band [5, 2, 1, 0.3] g/t. Grade×width 12.8 g/t·m is weak (grade alone is below; the better of the two is used).
Negative factors
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.20”
Context: K-26-326
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 58.1
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Metal Equivalent Opaquenegative
Metal equivalent grade reported without disclosing the price, recovery, or payability assumptions used.
Why it applies: an equivalent grade is reported without its assumptions
K-26-326Kwanika North · silverGrade: 1.04Grade Unit: g/tIntercept: 64.1 mView all detailsHide details
Identity
- Hole ID
- K-26-326
- Project
- Kwanika North
- Commodity
- silver
- Region
- canada_bc
- Reported Region
- canada_bc
- Ticker
- NWST
Geometry
- Grade
- 1.04
- Grade Unit
- g/t
- Intercept
- 64.1 m
- True Width
- 58.1 m
- From
- 58.9 m
- To
- 123 m
- Hole Depth
- 120 m
- Intercept Depth
- 58.9 m
Classification
- Sample Type
- drill
- Group ID
- K-26-326:58.9-123
- Mining Method
- open_pit
QA/QC
- Laboratory
- Actlabs
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Metal Equivalent
- Metal Eq. Grade
- 0.61
- Metal Eq. Unit
- % Cu-Eq
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-10-14T00:00:00.000Z
Reasoning: Expanded from assay table. 1.04 g/t silver is below against the default band [500, 200, 100, 30] g/t. Grade×width 66.7 g/t·m is below.
Negative factors
- 1.04 g/t silver is below the weak threshold (30 g/t) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“1.04”
Context: K-26-326
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 58.1
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Metal Equivalent Opaquenegative
Metal equivalent grade reported without disclosing the price, recovery, or payability assumptions used.
Why it applies: an equivalent grade is reported without its assumptions
K-26-326Kwanika North · palladiumGrade: 0Grade Unit: g/tIntercept: 64.1 mView all detailsHide details
Identity
- Hole ID
- K-26-326
- Project
- Kwanika North
- Commodity
- palladium
- Region
- canada_bc
- Reported Region
- canada_bc
- Ticker
- NWST
Geometry
- Grade
- 0
- Grade Unit
- g/t
- Intercept
- 64.1 m
- True Width
- 58.1 m
- From
- 58.9 m
- To
- 123 m
- Hole Depth
- 120 m
- Intercept Depth
- 58.9 m
Classification
- Sample Type
- drill
- Group ID
- K-26-326:58.9-123
- Mining Method
- open_pit
QA/QC
- Laboratory
- Actlabs
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Metal Equivalent
- Metal Eq. Grade
- 0.61
- Metal Eq. Unit
- % Cu-Eq
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-10-14T00:00:00.000Z
Reasoning: Expanded from assay table: 0 g/t palladium. No grade band defined for this commodity, so the score is a placeholder.
Negative factors
- No grade rubric for palladium; intercept not scored.
Evidence · table
“0.00”
Context: K-26-326
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 58.1
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Metal Equivalent Opaquenegative
Metal equivalent grade reported without disclosing the price, recovery, or payability assumptions used.
Why it applies: an equivalent grade is reported without its assumptions
K-26-326Kwanika North · silverGrade: 1.98Grade Unit: g/tIntercept: 16.6 mView all detailsHide details
Identity
- Hole ID
- K-26-326
- Project
- Kwanika North
- Commodity
- silver
- Region
- canada_bc
- Reported Region
- canada_bc
- Ticker
- NWST
Geometry
- Grade
- 1.98
- Grade Unit
- g/t
- Intercept
- 16.6 m
- True Width
- 15 m
- From
- 58.9 m
- To
- 75.5 m
- Hole Depth
- 120 m
- Intercept Depth
- 58.9 m
Classification
- Sample Type
- drill
- Group ID
- K-26-326:58.9-75.5
- Mining Method
- open_pit
QA/QC
- Laboratory
- Actlabs
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Metal Equivalent
- Metal Eq. Grade
- 1.2
- Metal Eq. Unit
- % Cu-Eq
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-10-14T00:00:00.000Z
Reasoning: Expanded from assay table. 1.98 g/t silver is below against the default band [500, 200, 100, 30] g/t. Grade×width 32.9 g/t·m is below.
Negative factors
- 1.98 g/t silver is below the weak threshold (30 g/t) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“1.98”
Context: Including
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 15
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Metal Equivalent Opaquenegative
Metal equivalent grade reported without disclosing the price, recovery, or payability assumptions used.
Why it applies: an equivalent grade is reported without its assumptions
K-26-326Kwanika North · palladiumGrade: 0Grade Unit: g/tIntercept: 16.6 mView all detailsHide details
Identity
- Hole ID
- K-26-326
- Project
- Kwanika North
- Commodity
- palladium
- Region
- canada_bc
- Reported Region
- canada_bc
- Ticker
- NWST
Geometry
- Grade
- 0
- Grade Unit
- g/t
- Intercept
- 16.6 m
- True Width
- 15 m
- From
- 58.9 m
- To
- 75.5 m
- Hole Depth
- 120 m
- Intercept Depth
- 58.9 m
Classification
- Sample Type
- drill
- Group ID
- K-26-326:58.9-75.5
- Mining Method
- open_pit
QA/QC
- Laboratory
- Actlabs
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Metal Equivalent
- Metal Eq. Grade
- 1.2
- Metal Eq. Unit
- % Cu-Eq
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-10-14T00:00:00.000Z
Reasoning: Expanded from assay table: 0 g/t palladium. No grade band defined for this commodity, so the score is a placeholder.
Negative factors
- No grade rubric for palladium; intercept not scored.
Evidence · table
“0.00”
Context: Including
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 15
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Metal Equivalent Opaquenegative
Metal equivalent grade reported without disclosing the price, recovery, or payability assumptions used.
Why it applies: an equivalent grade is reported without its assumptions
AndKwanika North · copperGrade: 0.34Grade Unit: %Intercept: 39 mView all detailsHide details
Identity
- Hole ID
- And
- Project
- Kwanika North
- Commodity
- copper
- Region
- canada_bc
- Reported Region
- canada_bc
- Ticker
- NWST
Geometry
- Grade
- 0.34
- Grade Unit
- %
- Intercept
- 39 m
- True Width
- 35.3 m
- From
- 84 m
- To
- 123 m
- Hole Depth
- 201 m
- Intercept Depth
- 84 m
Classification
- Sample Type
- drill
- Group ID
- And:84-123
- Mining Method
- open_pit
QA/QC
- Laboratory
- Actlabs
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Metal Equivalent
- Metal Eq. Grade
- 0.48
- Metal Eq. Unit
- % Cu-Eq
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-10-14T00:00:00.000Z
Reasoning: Expanded from assay table. 0.34 % copper is weak against the default band [2.5, 1, 0.5, 0.25] %. Grade×width 13.3 %·m is below (grade alone is weak; the better of the two is used).
Negative factors
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.34”
Context: And
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 35.3
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Metal Equivalent Opaquenegative
Metal equivalent grade reported without disclosing the price, recovery, or payability assumptions used.
Why it applies: an equivalent grade is reported without its assumptions
AndKwanika North · goldGrade: 0.13Grade Unit: g/tIntercept: 39 mView all detailsHide details
Identity
- Hole ID
- And
- Project
- Kwanika North
- Commodity
- gold
- Region
- canada_bc
- Reported Region
- canada_bc
- Ticker
- NWST
Geometry
- Grade
- 0.13
- Grade Unit
- g/t
- Intercept
- 39 m
- True Width
- 35.3 m
- From
- 84 m
- To
- 123 m
- Hole Depth
- 201 m
- Intercept Depth
- 84 m
Classification
- Sample Type
- drill
- Group ID
- And:84-123
- Mining Method
- open_pit
QA/QC
- Laboratory
- Actlabs
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Metal Equivalent
- Metal Eq. Grade
- 0.48
- Metal Eq. Unit
- % Cu-Eq
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-10-14T00:00:00.000Z
Reasoning: Expanded from assay table. 0.13 g/t gold is below against the open_pit mining band [5, 2, 1, 0.3] g/t. Grade×width 5.1 g/t·m is below.
Negative factors
- 0.13 g/t gold is below the weak threshold (0.3 g/t) on the open_pit mining band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.13”
Context: And
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 35.3
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Metal Equivalent Opaquenegative
Metal equivalent grade reported without disclosing the price, recovery, or payability assumptions used.
Why it applies: an equivalent grade is reported without its assumptions
AndKwanika North · silverGrade: 0.78Grade Unit: g/tIntercept: 39 mView all detailsHide details
Identity
- Hole ID
- And
- Project
- Kwanika North
- Commodity
- silver
- Region
- canada_bc
- Reported Region
- canada_bc
- Ticker
- NWST
Geometry
- Grade
- 0.78
- Grade Unit
- g/t
- Intercept
- 39 m
- True Width
- 35.3 m
- From
- 84 m
- To
- 123 m
- Hole Depth
- 201 m
- Intercept Depth
- 84 m
Classification
- Sample Type
- drill
- Group ID
- And:84-123
- Mining Method
- open_pit
QA/QC
- Laboratory
- Actlabs
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Metal Equivalent
- Metal Eq. Grade
- 0.48
- Metal Eq. Unit
- % Cu-Eq
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-10-14T00:00:00.000Z
Reasoning: Expanded from assay table. 0.78 g/t silver is below against the default band [500, 200, 100, 30] g/t. Grade×width 30.4 g/t·m is below.
Negative factors
- 0.78 g/t silver is below the weak threshold (30 g/t) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.78”
Context: And
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 35.3
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Metal Equivalent Opaquenegative
Metal equivalent grade reported without disclosing the price, recovery, or payability assumptions used.
Why it applies: an equivalent grade is reported without its assumptions
AndKwanika North · palladiumGrade: 0Grade Unit: g/tIntercept: 39 mView all detailsHide details
Identity
- Hole ID
- And
- Project
- Kwanika North
- Commodity
- palladium
- Region
- canada_bc
- Reported Region
- canada_bc
- Ticker
- NWST
Geometry
- Grade
- 0
- Grade Unit
- g/t
- Intercept
- 39 m
- True Width
- 35.3 m
- From
- 84 m
- To
- 123 m
- Hole Depth
- 201 m
- Intercept Depth
- 84 m
Classification
- Sample Type
- drill
- Group ID
- And:84-123
- Mining Method
- open_pit
QA/QC
- Laboratory
- Actlabs
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Metal Equivalent
- Metal Eq. Grade
- 0.48
- Metal Eq. Unit
- % Cu-Eq
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-10-14T00:00:00.000Z
Reasoning: Expanded from assay table: 0 g/t palladium. No grade band defined for this commodity, so the score is a placeholder.
Negative factors
- No grade rubric for palladium; intercept not scored.
Evidence · table
“0.00”
Context: And
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 35.3
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Metal Equivalent Opaquenegative
Metal equivalent grade reported without disclosing the price, recovery, or payability assumptions used.
Why it applies: an equivalent grade is reported without its assumptions
K-26-326Kwanika North · copperGrade: 0.38Grade Unit: %Intercept: 28.7 mView all detailsHide details
Identity
- Hole ID
- K-26-326
- Project
- Kwanika North
- Commodity
- copper
- Region
- canada_bc
- Reported Region
- canada_bc
- Ticker
- NWST
Geometry
- Grade
- 0.38
- Grade Unit
- %
- Intercept
- 28.7 m
- True Width
- 26 m
- From
- 158.7 m
- To
- 187.3 m
- Hole Depth
- 120 m
- Intercept Depth
- 158.7 m
Classification
- Sample Type
- drill
- Group ID
- K-26-326:158.7-187.3
- Mining Method
- open_pit
QA/QC
- Laboratory
- Actlabs
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Metal Equivalent
- Metal Eq. Grade
- 0.55
- Metal Eq. Unit
- % Cu-Eq
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-10-14T00:00:00.000Z
Reasoning: Expanded from assay table. 0.38 % copper is weak against the default band [2.5, 1, 0.5, 0.25] %. Grade×width 10.9 %·m is below (grade alone is weak; the better of the two is used).
Negative factors
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.38”
Context: K-26-326
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 26
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Metal Equivalent Opaquenegative
Metal equivalent grade reported without disclosing the price, recovery, or payability assumptions used.
Why it applies: an equivalent grade is reported without its assumptions
K-26-326Kwanika North · goldGrade: 0.14Grade Unit: g/tIntercept: 28.7 mView all detailsHide details
Identity
- Hole ID
- K-26-326
- Project
- Kwanika North
- Commodity
- gold
- Region
- canada_bc
- Reported Region
- canada_bc
- Ticker
- NWST
Geometry
- Grade
- 0.14
- Grade Unit
- g/t
- Intercept
- 28.7 m
- True Width
- 26 m
- From
- 158.7 m
- To
- 187.3 m
- Hole Depth
- 120 m
- Intercept Depth
- 158.7 m
Classification
- Sample Type
- drill
- Group ID
- K-26-326:158.7-187.3
- Mining Method
- open_pit
QA/QC
- Laboratory
- Actlabs
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Metal Equivalent
- Metal Eq. Grade
- 0.55
- Metal Eq. Unit
- % Cu-Eq
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-10-14T00:00:00.000Z
Reasoning: Expanded from assay table. 0.14 g/t gold is below against the open_pit mining band [5, 2, 1, 0.3] g/t. Grade×width 4.0 g/t·m is below.
Negative factors
- 0.14 g/t gold is below the weak threshold (0.3 g/t) on the open_pit mining band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.14”
Context: K-26-326
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 26
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Metal Equivalent Opaquenegative
Metal equivalent grade reported without disclosing the price, recovery, or payability assumptions used.
Why it applies: an equivalent grade is reported without its assumptions
K-26-326Kwanika North · silverGrade: 0.82Grade Unit: g/tIntercept: 28.7 mView all detailsHide details
Identity
- Hole ID
- K-26-326
- Project
- Kwanika North
- Commodity
- silver
- Region
- canada_bc
- Reported Region
- canada_bc
- Ticker
- NWST
Geometry
- Grade
- 0.82
- Grade Unit
- g/t
- Intercept
- 28.7 m
- True Width
- 26 m
- From
- 158.7 m
- To
- 187.3 m
- Hole Depth
- 120 m
- Intercept Depth
- 158.7 m
Classification
- Sample Type
- drill
- Group ID
- K-26-326:158.7-187.3
- Mining Method
- open_pit
QA/QC
- Laboratory
- Actlabs
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Metal Equivalent
- Metal Eq. Grade
- 0.55
- Metal Eq. Unit
- % Cu-Eq
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-10-14T00:00:00.000Z
Reasoning: Expanded from assay table. 0.82 g/t silver is below against the default band [500, 200, 100, 30] g/t. Grade×width 23.5 g/t·m is below.
Negative factors
- 0.82 g/t silver is below the weak threshold (30 g/t) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.82”
Context: K-26-326
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 26
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Metal Equivalent Opaquenegative
Metal equivalent grade reported without disclosing the price, recovery, or payability assumptions used.
Why it applies: an equivalent grade is reported without its assumptions
K-26-326Kwanika North · palladiumGrade: 0.01Grade Unit: g/tIntercept: 28.7 mView all detailsHide details
Identity
- Hole ID
- K-26-326
- Project
- Kwanika North
- Commodity
- palladium
- Region
- canada_bc
- Reported Region
- canada_bc
- Ticker
- NWST
Geometry
- Grade
- 0.01
- Grade Unit
- g/t
- Intercept
- 28.7 m
- True Width
- 26 m
- From
- 158.7 m
- To
- 187.3 m
- Hole Depth
- 120 m
- Intercept Depth
- 158.7 m
Classification
- Sample Type
- drill
- Group ID
- K-26-326:158.7-187.3
- Mining Method
- open_pit
QA/QC
- Laboratory
- Actlabs
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Metal Equivalent
- Metal Eq. Grade
- 0.55
- Metal Eq. Unit
- % Cu-Eq
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-10-14T00:00:00.000Z
Reasoning: Expanded from assay table: 0.01 g/t palladium. No grade band defined for this commodity, so the score is a placeholder.
Negative factors
- No grade rubric for palladium; intercept not scored.
Evidence · table
“0.01”
Context: K-26-326
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 26
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Metal Equivalent Opaquenegative
Metal equivalent grade reported without disclosing the price, recovery, or payability assumptions used.
Why it applies: an equivalent grade is reported without its assumptions
How Atlas produces this analysis
Minestarters Atlas uses automated extraction to summarize mining announcements, identify reported measurements, and classify supporting evidence. Sentiment reflects the extracted narrative and classification rules; it is an interpretation, not a reported measurement. Evidence quotes and context are provided where available. Missing data, low-confidence results, and review flags indicate limitations. Check the original publisher announcement before relying on an interpretation.