NorthWest Intersects 110.0 Metres of 1.86% CuEq, 0.64% Copper and 1.10 g/t Gold in the Western Zone at Kwanika from 378 Metres
Original announcement by orestocks on
- Company
- NorthWest Copper Corp.
- Ticker
- NWST.V
- Exchange
- Unavailable
- Region
- British Columbia
- Primary commodity
- Copper
- Secondary commodities
- Gold, Silver, Palladium
- Document categories
- Drill results
- Extracted
- 2026-10-21 13:59:34 UTC
Analysis by Minestarters Atlas
Atlas analysis published:
Minestarters Atlas analysis
Summary
NorthWest Copper announced strong drill results from its Kwanika project in British Columbia, highlighted by an intercept of 110.0 metres grading 1.86% CuEq (0.64% copper and 1.10 g/t gold) in hole K-26-346. The drilling successfully confirmed geological and grade continuity in the Western Zone, reduced drill spacing to support future resource classification, and identified new mineralized structures and extensions, including an up-dip extension and a new porphyry zone. These results are part of a 43-hole program aimed at increasing resource confidence and assessing potential impact on a Preliminary Economic Assessment.
Reasoning: The drill results confirm high-grade copper-gold mineralization over significant widths, including a bonanza intercept in K-26-346, and identify new mineralized structures and extensions, supporting increased resource confidence and future growth.
Positive factors
- Bonanza Intercept
- True Width Disclosed
- Step-Out Extension
- QA/QC Disclosed
- Infill Drilling
Facts used in scoring: 76
Classification and evidence
Bonanza Interceptpositive
Exceptionally high-grade zone, well above the deposit-type norm.
Why it applies: The CuEq grade of 1.86% over 110.0m in K-26-346 is well above the exceptional threshold for porphyry copper deposits (0.8% CuEq).
Evidence · text
“110.0 metres (estimated true width of 84.3 metres) grading 0.64% copper and 1.10 g/t gold (1.86% copper equivalent (“CuEq”))”
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: The release explicitly states an estimated true width of 84.3 metres for the main intercept in K-26-346.
Evidence · text
“estimated true width of 84.3 metres”
Step-Out Extensionpositive
Mineralization extended beyond the previously known limit.
Why it applies: Drilling identified a new mineralized structure above previously defined zones and an additional porphyry mineralized zone immediately below previously defined structures, highlighting expansion potential.
Evidence · text
“intersected a new mineralized structure above previously defined mineralized zones, grading 1.07% CuEq over 30 metres, and identified an additional primary porphyry mineralized zone immediately below previously defined mineralized structures, highlighting further expansion potential at Kwanika.”
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: The release includes a detailed 'Quality Assurance / Quality Control' section, mentioning certified labs, QP sign-off, and methods like blanks, standards, duplicates, and check assays.
Evidence · text
“Quality Assurance / Quality Control Drilling at Kwanika in 2026 was designed and supervised by NorthWest and implemented by InData Geoscience with assay QA/QC checks by Explore Geosolutions. Samples were collected, tracked and an external QA/QC program was implemented using coarse blanks and certified prepared blanks and standards to monitor analytical accuracy and precision. The samples were sealed on site and shipped to Activation Laboratories Ltd. (“Actlabs”) in Kamloops, BC. The laboratory’s internal quality control system complies with global certifications for quality ISO 17025. Drill core samples were analyzed using a combination of Actlabs multi-element 1F2 analysis for low level concentrations (4-Acid Digestion, ICP-OES) and the 8-4 Acid ICP-OES analysis for higher level concentrations (4-Acid Digestion, ICP-OES with automatic over limits for base metals and silver). Gold, platinum and palladium assaying was completed with 1C-OES method, using a 30-gram fire assay with ICP finish analysis. In addition, about 5% of the sample pulps are re-assayed at a secondary laboratory to confirm reproducibility and check for bias. Technical aspects of this news release have been reviewed, verified, and approved by Geoff Chinn, P.Geo., VP Business Development and Exploration for NorthWest, who is a qualified person as defined by National Instrument 43-101 – Standards of Disclosure for Mineral Projects.”
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: The program's objective included reducing drill hole spacing to approximately 50 metres to support increased confidence in the classification of future mineral resource updates.
Evidence · text
“reducing drill hole spacing to approximately 50 metres to support increased confidence in the classification of future mineral resource updates.”
Extracted facts
Stored fact records: 76. Some facts used in scoring do not have a stored record.
Drill Results (76)
K-26-259Kwanika · copperGrade: 0.42Grade Unit: %Intercept: 115.1 mView all detailsHide details
Identity
- Hole ID
- K-26-259
- Project
- Kwanika
- Commodity
- copper
- Region
- canada_bc
- Reported Region
- canada_bc
- Ticker
- NWST.V
Geometry
- Grade
- 0.42
- Grade Unit
- %
- Intercept
- 115.1 m
- True Width
- 74 m
- From
- 406.9 m
- To
- 522 m
- Hole Depth
- 576 m
- Intercept Depth
- 406.9 m
Classification
- Deposit Type
- porphyry
- Program
- resource
- Sample Type
- drill
- Group ID
- K-26-259:406.9-522
- Mining Method
- open_pit
Location
- Location
- Western Zone
- Easting
- 351325
- Northing
- 6156207
- CRS
- UTM Zone 10N NAD83
- EPSG
- 26910
- Elevation
- 1002 m
- Azimuth
- 0 °
- Dip
- -90 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- Activation Laboratories Ltd.
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Metal Equivalent
- Metal Eq. Grade
- 1.19
- Metal Eq. Unit
- % CuEq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-10-21T00:00:00.000Z
Reasoning: The CuEq grade of 1.19% over 115.1m is a strong result for a porphyry deposit, confirming continuity and supporting resource classification.
Positive factors
- True Width Disclosed
- QA/QC Disclosed
- Infill Drilling
Evidence · table
“1.19”
Context: 115.1
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 74
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
K-26-259Kwanika · goldGrade: 0.69Grade Unit: g/tIntercept: 115.1 mView all detailsHide details
Identity
- Hole ID
- K-26-259
- Project
- Kwanika
- Commodity
- gold
- Region
- canada_bc
- Reported Region
- canada_bc
- Ticker
- NWST.V
Geometry
- Grade
- 0.69
- Grade Unit
- g/t
- Intercept
- 115.1 m
- True Width
- 74 m
- From
- 406.9 m
- To
- 522 m
- Hole Depth
- 576 m
- Intercept Depth
- 406.9 m
Classification
- Deposit Type
- porphyry
- Program
- resource
- Sample Type
- drill
- Group ID
- K-26-259:406.9-522
- Mining Method
- open_pit
Location
- Location
- Western Zone
- Easting
- 351325
- Northing
- 6156207
- CRS
- UTM Zone 10N NAD83
- EPSG
- 26910
- Elevation
- 1002 m
- Azimuth
- 0 °
- Dip
- -90 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- Activation Laboratories Ltd.
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Metal Equivalent
- Metal Eq. Grade
- 1.19
- Metal Eq. Unit
- % Cu-Eq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-10-21T00:00:00.000Z
Reasoning: The gold intercept of 115.1m at 0.69 g/t is a good width and grade for a porphyry deposit, contributing to resource confidence.
Positive factors
- True Width Disclosed
- QA/QC Disclosed
- Infill Drilling
Evidence · table
“0.69”
Context: 115.1
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 74
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
K-26-259Kwanika · silverGrade: 1.7Grade Unit: g/tIntercept: 115.1 mView all detailsHide details
Identity
- Hole ID
- K-26-259
- Project
- Kwanika
- Commodity
- silver
- Region
- canada_bc
- Reported Region
- canada_bc
- Ticker
- NWST.V
Geometry
- Grade
- 1.7
- Grade Unit
- g/t
- Intercept
- 115.1 m
- True Width
- 74 m
- From
- 406.9 m
- To
- 522 m
- Hole Depth
- 576 m
- Intercept Depth
- 406.9 m
Classification
- Deposit Type
- porphyry
- Program
- resource
- Sample Type
- drill
- Group ID
- K-26-259:406.9-522
- Mining Method
- open_pit
Location
- Location
- Western Zone
- Easting
- 351325
- Northing
- 6156207
- CRS
- UTM Zone 10N NAD83
- EPSG
- 26910
- Elevation
- 1002 m
- Azimuth
- 0 °
- Dip
- -90 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- Activation Laboratories Ltd.
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Metal Equivalent
- Metal Eq. Grade
- 1.19
- Metal Eq. Unit
- % Cu-Eq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-10-21T00:00:00.000Z
Reasoning: The silver grade of 1.7 g/t over 115.1m is a minor byproduct credit for a porphyry system.
Positive factors
- True Width Disclosed
- QA/QC Disclosed
- Infill Drilling
Evidence · table
“1.70”
Context: 115.1
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 74
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
K-26-259Kwanika · palladiumGrade: 0.03Grade Unit: g/tIntercept: 115.1 mView all detailsHide details
Identity
- Hole ID
- K-26-259
- Project
- Kwanika
- Commodity
- palladium
- Region
- canada_bc
- Reported Region
- canada_bc
- Ticker
- NWST.V
Geometry
- Grade
- 0.03
- Grade Unit
- g/t
- Intercept
- 115.1 m
- True Width
- 74 m
- From
- 406.9 m
- To
- 522 m
- Hole Depth
- 576 m
- Intercept Depth
- 406.9 m
Classification
- Deposit Type
- porphyry
- Program
- resource
- Sample Type
- drill
- Group ID
- K-26-259:406.9-522
- Mining Method
- open_pit
Location
- Location
- Western Zone
- Easting
- 351325
- Northing
- 6156207
- CRS
- UTM Zone 10N NAD83
- EPSG
- 26910
- Elevation
- 1002 m
- Azimuth
- 0 °
- Dip
- -90 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- Activation Laboratories Ltd.
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Metal Equivalent
- Metal Eq. Grade
- 1.19
- Metal Eq. Unit
- % Cu-Eq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-10-21T00:00:00.000Z
Reasoning: The palladium grade of 0.03 g/t over 115.1m is a very low byproduct credit.
Positive factors
- True Width Disclosed
- QA/QC Disclosed
- Infill Drilling
Evidence · table
“0.03”
Context: 115.1
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 74
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
K-26-259Kwanika · copperGrade: 0.67Grade Unit: %Intercept: 54.1 mView all detailsHide details
Identity
- Hole ID
- K-26-259
- Project
- Kwanika
- Commodity
- copper
- Region
- canada_bc
- Reported Region
- canada_bc
- Ticker
- NWST.V
Geometry
- Grade
- 0.67
- Grade Unit
- %
- Intercept
- 54.1 m
- True Width
- 34.8 m
- From
- 406.9 m
- To
- 461 m
- Hole Depth
- 576 m
- Intercept Depth
- 406.9 m
Classification
- Deposit Type
- porphyry
- Program
- resource
- Sample Type
- drill
- Group ID
- K-26-259:406.9-461
- Mining Method
- open_pit
Location
- Location
- Western Zone
- Easting
- 351325
- Northing
- 6156207
- CRS
- UTM Zone 10N NAD83
- EPSG
- 26910
- Elevation
- 1002 m
- Azimuth
- 0 °
- Dip
- -90 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- Activation Laboratories Ltd.
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Metal Equivalent
- Metal Eq. Grade
- 1.66
- Metal Eq. Unit
- % CuEq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-10-21T00:00:00.000Z
Reasoning: The CuEq grade of 1.66% over 54.1m is a very strong result for a porphyry, enhancing resource confidence.
Positive factors
- QA/QC Disclosed
- Infill Drilling
Evidence · table
“1.66”
Context: 54.1
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 34.8
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
K-26-259Kwanika · goldGrade: 0.9Grade Unit: g/tIntercept: 54.1 mView all detailsHide details
Identity
- Hole ID
- K-26-259
- Project
- Kwanika
- Commodity
- gold
- Region
- canada_bc
- Reported Region
- canada_bc
- Ticker
- NWST.V
Geometry
- Grade
- 0.9
- Grade Unit
- g/t
- Intercept
- 54.1 m
- True Width
- 34.8 m
- From
- 406.9 m
- To
- 461 m
- Hole Depth
- 576 m
- Intercept Depth
- 406.9 m
Classification
- Deposit Type
- porphyry
- Program
- resource
- Sample Type
- drill
- Group ID
- K-26-259:406.9-461
- Mining Method
- open_pit
Location
- Location
- Western Zone
- Easting
- 351325
- Northing
- 6156207
- CRS
- UTM Zone 10N NAD83
- EPSG
- 26910
- Elevation
- 1002 m
- Azimuth
- 0 °
- Dip
- -90 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- Activation Laboratories Ltd.
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Metal Equivalent
- Metal Eq. Grade
- 1.66
- Metal Eq. Unit
- % Cu-Eq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-10-21T00:00:00.000Z
Reasoning: The gold sub-interval of 54.1m at 0.90 g/t is a strong grade and width for a porphyry, enhancing resource confidence.
Positive factors
- QA/QC Disclosed
- Infill Drilling
Evidence · table
“0.90”
Context: 54.1
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 34.8
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
K-26-259Kwanika · silverGrade: 2.39Grade Unit: g/tIntercept: 54.1 mView all detailsHide details
Identity
- Hole ID
- K-26-259
- Project
- Kwanika
- Commodity
- silver
- Region
- canada_bc
- Reported Region
- canada_bc
- Ticker
- NWST.V
Geometry
- Grade
- 2.39
- Grade Unit
- g/t
- Intercept
- 54.1 m
- True Width
- 34.8 m
- From
- 406.9 m
- To
- 461 m
- Hole Depth
- 576 m
- Intercept Depth
- 406.9 m
Classification
- Deposit Type
- porphyry
- Program
- resource
- Sample Type
- drill
- Group ID
- K-26-259:406.9-461
- Mining Method
- open_pit
Location
- Location
- Western Zone
- Easting
- 351325
- Northing
- 6156207
- CRS
- UTM Zone 10N NAD83
- EPSG
- 26910
- Elevation
- 1002 m
- Azimuth
- 0 °
- Dip
- -90 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- Activation Laboratories Ltd.
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Metal Equivalent
- Metal Eq. Grade
- 1.66
- Metal Eq. Unit
- % Cu-Eq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-10-21T00:00:00.000Z
Reasoning: The silver grade of 2.39 g/t over 54.1m is a minor byproduct credit for a porphyry system.
Positive factors
- QA/QC Disclosed
- Infill Drilling
Evidence · table
“2.39”
Context: 54.1
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 34.8
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
K-26-259Kwanika · palladiumGrade: 0.01Grade Unit: g/tIntercept: 54.1 mView all detailsHide details
Identity
- Hole ID
- K-26-259
- Project
- Kwanika
- Commodity
- palladium
- Region
- canada_bc
- Reported Region
- canada_bc
- Ticker
- NWST.V
Geometry
- Grade
- 0.01
- Grade Unit
- g/t
- Intercept
- 54.1 m
- True Width
- 34.8 m
- From
- 406.9 m
- To
- 461 m
- Hole Depth
- 576 m
- Intercept Depth
- 406.9 m
Classification
- Deposit Type
- porphyry
- Program
- resource
- Sample Type
- drill
- Group ID
- K-26-259:406.9-461
- Mining Method
- open_pit
Location
- Location
- Western Zone
- Easting
- 351325
- Northing
- 6156207
- CRS
- UTM Zone 10N NAD83
- EPSG
- 26910
- Elevation
- 1002 m
- Azimuth
- 0 °
- Dip
- -90 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- Activation Laboratories Ltd.
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Metal Equivalent
- Metal Eq. Grade
- 1.66
- Metal Eq. Unit
- % Cu-Eq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-10-21T00:00:00.000Z
Reasoning: The palladium grade of 0.01 g/t over 54.1m is a very low byproduct credit.
Positive factors
- QA/QC Disclosed
- Infill Drilling
Evidence · table
“0.01”
Context: 54.1
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 34.8
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
K-26-259Kwanika · copperIntercept: 40 mView all detailsHide details
Identity
- Hole ID
- K-26-259
- Project
- Kwanika
- Commodity
- copper
- Region
- canada_bc
- Reported Region
- canada_bc
- Ticker
- NWST.V
Geometry
- Intercept
- 40 m
- From
- 476 m
- To
- 516 m
- Hole Depth
- 576 m
- Intercept Depth
- 406.9 m
Classification
- Deposit Type
- porphyry
- Program
- resource
- Sample Type
- drill
- Group ID
- K-26-259:476-516
- Mining Method
- open_pit
Location
- Location
- Western Zone
- Easting
- 351325
- Northing
- 6156207
- CRS
- UTM Zone 10N NAD83
- EPSG
- 26910
- Elevation
- 1002 m
- Azimuth
- 0 °
- Dip
- -90 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- Activation Laboratories Ltd.
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Metal Equivalent
- Metal Eq. Grade
- 0.89
- Metal Eq. Unit
- % CuEq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-10-21T00:00:00.000Z
Reasoning: The CuEq grade of 0.89% over 40.0m is a good result for a porphyry, contributing to overall continuity.
Positive factors
- QA/QC Disclosed
- Infill Drilling
Evidence · table
“0.89”
Context: 40.0
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
K-26-259Kwanika · goldGrade: 0.59Grade Unit: g/tIntercept: 40 mView all detailsHide details
Identity
- Hole ID
- K-26-259
- Project
- Kwanika
- Commodity
- gold
- Region
- canada_bc
- Reported Region
- canada_bc
- Ticker
- NWST.V
Geometry
- Grade
- 0.59
- Grade Unit
- g/t
- Intercept
- 40 m
- From
- 476 m
- To
- 516 m
- Hole Depth
- 576 m
- Intercept Depth
- 406.9 m
Classification
- Deposit Type
- porphyry
- Program
- resource
- Sample Type
- drill
- Group ID
- K-26-259:476-516
- Mining Method
- open_pit
Location
- Location
- Western Zone
- Easting
- 351325
- Northing
- 6156207
- CRS
- UTM Zone 10N NAD83
- EPSG
- 26910
- Elevation
- 1002 m
- Azimuth
- 0 °
- Dip
- -90 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- Activation Laboratories Ltd.
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Metal Equivalent
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-10-21T00:00:00.000Z
Reasoning: The gold sub-interval of 40.0m at 0.59 g/t is a moderate grade for a porphyry, contributing to overall continuity.
Positive factors
- QA/QC Disclosed
- Infill Drilling
Evidence · table
“0.59”
Context: 40.0
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
K-26-259Kwanika · silverGrade: 1.34Grade Unit: g/tIntercept: 40 mView all detailsHide details
Identity
- Hole ID
- K-26-259
- Project
- Kwanika
- Commodity
- silver
- Region
- canada_bc
- Reported Region
- canada_bc
- Ticker
- NWST.V
Geometry
- Grade
- 1.34
- Grade Unit
- g/t
- Intercept
- 40 m
- From
- 476 m
- To
- 516 m
- Hole Depth
- 576 m
- Intercept Depth
- 406.9 m
Classification
- Deposit Type
- porphyry
- Program
- resource
- Sample Type
- drill
- Group ID
- K-26-259:476-516
- Mining Method
- open_pit
Location
- Location
- Western Zone
- Easting
- 351325
- Northing
- 6156207
- CRS
- UTM Zone 10N NAD83
- EPSG
- 26910
- Elevation
- 1002 m
- Azimuth
- 0 °
- Dip
- -90 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- Activation Laboratories Ltd.
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Metal Equivalent
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-10-21T00:00:00.000Z
Reasoning: The silver grade of 1.34 g/t over 40.0m is a minor byproduct credit for a porphyry system.
Positive factors
- QA/QC Disclosed
- Infill Drilling
Evidence · table
“1.34”
Context: 40.0
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
K-26-259Kwanika · palladiumGrade: 0.05Grade Unit: g/tIntercept: 40 mView all detailsHide details
Identity
- Hole ID
- K-26-259
- Project
- Kwanika
- Commodity
- palladium
- Region
- canada_bc
- Reported Region
- canada_bc
- Ticker
- NWST.V
Geometry
- Grade
- 0.05
- Grade Unit
- g/t
- Intercept
- 40 m
- From
- 476 m
- To
- 516 m
- Hole Depth
- 576 m
- Intercept Depth
- 406.9 m
Classification
- Deposit Type
- porphyry
- Program
- resource
- Sample Type
- drill
- Group ID
- K-26-259:476-516
- Mining Method
- open_pit
Location
- Location
- Western Zone
- Easting
- 351325
- Northing
- 6156207
- CRS
- UTM Zone 10N NAD83
- EPSG
- 26910
- Elevation
- 1002 m
- Azimuth
- 0 °
- Dip
- -90 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- Activation Laboratories Ltd.
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Metal Equivalent
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-10-21T00:00:00.000Z
Reasoning: The palladium grade of 0.05 g/t over 40.0m is a very low byproduct credit, but noted as persistent palladium enrichment in Unit 2.
Positive factors
- QA/QC Disclosed
- Infill Drilling
Evidence · table
“0.05”
Context: 40.0
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
K-26-259Kwanika · copperGrade: 0.27Grade Unit: %Intercept: 22 mView all detailsHide details
Identity
- Hole ID
- K-26-259
- Project
- Kwanika
- Commodity
- copper
- Region
- canada_bc
- Reported Region
- canada_bc
- Ticker
- NWST.V
Geometry
- Grade
- 0.27
- Grade Unit
- %
- Intercept
- 22 m
- True Width
- 14.1 m
- From
- 554 m
- To
- 576 m
- Hole Depth
- 576 m
- Intercept Depth
- 406.9 m
Classification
- Deposit Type
- porphyry
- Program
- resource
- Sample Type
- drill
- Group ID
- K-26-259:554-576
- Mining Method
- open_pit
Location
- Location
- Western Zone
- Easting
- 351325
- Northing
- 6156207
- CRS
- UTM Zone 10N NAD83
- EPSG
- 26910
- Elevation
- 1002 m
- Azimuth
- 0 °
- Dip
- -90 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- Activation Laboratories Ltd.
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Metal Equivalent
- Metal Eq. Grade
- 0.54
- Metal Eq. Unit
- % CuEq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-10-21T00:00:00.000Z
Reasoning: The CuEq grade of 0.54% over 22.0m is a moderate result for a porphyry, contributing to overall continuity.
Positive factors
- True Width Disclosed
- QA/QC Disclosed
- Infill Drilling
Evidence · table
“0.54”
Context: 22.0
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 14.1
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
K-26-259Kwanika · goldGrade: 0.23Grade Unit: g/tIntercept: 22 mView all detailsHide details
Identity
- Hole ID
- K-26-259
- Project
- Kwanika
- Commodity
- gold
- Region
- canada_bc
- Reported Region
- canada_bc
- Ticker
- NWST.V
Geometry
- Grade
- 0.23
- Grade Unit
- g/t
- Intercept
- 22 m
- True Width
- 14.1 m
- From
- 554 m
- To
- 576 m
- Hole Depth
- 576 m
- Intercept Depth
- 406.9 m
Classification
- Deposit Type
- porphyry
- Program
- resource
- Sample Type
- drill
- Group ID
- K-26-259:554-576
- Mining Method
- open_pit
Location
- Location
- Western Zone
- Easting
- 351325
- Northing
- 6156207
- CRS
- UTM Zone 10N NAD83
- EPSG
- 26910
- Elevation
- 1002 m
- Azimuth
- 0 °
- Dip
- -90 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- Activation Laboratories Ltd.
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Metal Equivalent
- Metal Eq. Grade
- 0.54
- Metal Eq. Unit
- % Cu-Eq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-10-21T00:00:00.000Z
Reasoning: The gold intercept of 22.0m at 0.23 g/t is a weak grade for a porphyry, but contributes to overall continuity.
Positive factors
- True Width Disclosed
- QA/QC Disclosed
- Infill Drilling
Evidence · table
“0.23”
Context: 22.0
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 14.1
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
K-26-259Kwanika · silverGrade: 1.55Grade Unit: g/tIntercept: 22 mView all detailsHide details
Identity
- Hole ID
- K-26-259
- Project
- Kwanika
- Commodity
- silver
- Region
- canada_bc
- Reported Region
- canada_bc
- Ticker
- NWST.V
Geometry
- Grade
- 1.55
- Grade Unit
- g/t
- Intercept
- 22 m
- True Width
- 14.1 m
- From
- 554 m
- To
- 576 m
- Hole Depth
- 576 m
- Intercept Depth
- 406.9 m
Classification
- Deposit Type
- porphyry
- Program
- resource
- Sample Type
- drill
- Group ID
- K-26-259:554-576
- Mining Method
- open_pit
Location
- Location
- Western Zone
- Easting
- 351325
- Northing
- 6156207
- CRS
- UTM Zone 10N NAD83
- EPSG
- 26910
- Elevation
- 1002 m
- Azimuth
- 0 °
- Dip
- -90 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- Activation Laboratories Ltd.
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Metal Equivalent
- Metal Eq. Grade
- 0.54
- Metal Eq. Unit
- % Cu-Eq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-10-21T00:00:00.000Z
Reasoning: The silver grade of 1.55 g/t over 22.0m is a minor byproduct credit for a porphyry system.
Positive factors
- True Width Disclosed
- QA/QC Disclosed
- Infill Drilling
Evidence · table
“1.55”
Context: 22.0
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 14.1
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
K-26-259Kwanika · palladiumGrade: 0.01Grade Unit: g/tIntercept: 22 mView all detailsHide details
Identity
- Hole ID
- K-26-259
- Project
- Kwanika
- Commodity
- palladium
- Region
- canada_bc
- Reported Region
- canada_bc
- Ticker
- NWST.V
Geometry
- Grade
- 0.01
- Grade Unit
- g/t
- Intercept
- 22 m
- True Width
- 14.1 m
- From
- 554 m
- To
- 576 m
- Hole Depth
- 576 m
- Intercept Depth
- 406.9 m
Classification
- Deposit Type
- porphyry
- Program
- resource
- Sample Type
- drill
- Group ID
- K-26-259:554-576
- Mining Method
- open_pit
Location
- Location
- Western Zone
- Easting
- 351325
- Northing
- 6156207
- CRS
- UTM Zone 10N NAD83
- EPSG
- 26910
- Elevation
- 1002 m
- Azimuth
- 0 °
- Dip
- -90 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- Activation Laboratories Ltd.
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Metal Equivalent
- Metal Eq. Grade
- 0.54
- Metal Eq. Unit
- % Cu-Eq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-10-21T00:00:00.000Z
Reasoning: The palladium grade of 0.01 g/t over 22.0m is a very low byproduct credit.
Positive factors
- True Width Disclosed
- QA/QC Disclosed
- Infill Drilling
Evidence · table
“0.01”
Context: 22.0
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 14.1
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
K-26-264Kwanika · copperGrade: 0.5Grade Unit: %Intercept: 30 mView all detailsHide details
Identity
- Hole ID
- K-26-264
- Project
- Kwanika
- Commodity
- copper
- Region
- canada_bc
- Reported Region
- canada_bc
- Ticker
- NWST.V
Geometry
- Grade
- 0.5
- Grade Unit
- %
- Intercept
- 30 m
- True Width
- 19.3 m
- From
- 411 m
- To
- 441 m
- Hole Depth
- 650 m
- Intercept Depth
- 411 m
Classification
- Deposit Type
- porphyry
- Program
- exploration
- Sample Type
- drill
- Group ID
- K-26-264:411-441
- Mining Method
- open_pit
Location
- Location
- Western Zone
- Easting
- 351325
- Northing
- 6156260
- CRS
- UTM Zone 10N NAD83
- EPSG
- 26910
- Elevation
- 1012 m
- Azimuth
- 0 °
- Dip
- -90 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- Activation Laboratories Ltd.
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Metal Equivalent
- Metal Eq. Grade
- 1.07
- Metal Eq. Unit
- % CuEq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-10-21T00:00:00.000Z
Reasoning: The CuEq grade of 1.07% over 30.0m is a strong result for a porphyry, representing a new mineralized structure and highlighting expansion potential.
Positive factors
- True Width Disclosed
- Step-Out Extension
- QA/QC Disclosed
Evidence · table
“1.07”
Context: 30.0
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 19.3
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
K-26-264Kwanika · goldGrade: 0.51Grade Unit: g/tIntercept: 30 mView all detailsHide details
Identity
- Hole ID
- K-26-264
- Project
- Kwanika
- Commodity
- gold
- Region
- canada_bc
- Reported Region
- canada_bc
- Ticker
- NWST.V
Geometry
- Grade
- 0.51
- Grade Unit
- g/t
- Intercept
- 30 m
- True Width
- 19.3 m
- From
- 411 m
- To
- 441 m
- Hole Depth
- 650 m
- Intercept Depth
- 411 m
Classification
- Deposit Type
- porphyry
- Program
- exploration
- Sample Type
- drill
- Group ID
- K-26-264:411-441
- Mining Method
- open_pit
Location
- Location
- Western Zone
- Easting
- 351325
- Northing
- 6156260
- CRS
- UTM Zone 10N NAD83
- EPSG
- 26910
- Elevation
- 1012 m
- Azimuth
- 0 °
- Dip
- -90 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- Activation Laboratories Ltd.
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Metal Equivalent
- Metal Eq. Grade
- 1.07
- Metal Eq. Unit
- % Cu-Eq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-10-21T00:00:00.000Z
Reasoning: The gold intercept of 30.0m at 0.51 g/t is a good grade and width for a porphyry, representing a new mineralized structure.
Positive factors
- True Width Disclosed
- Step-Out Extension
- QA/QC Disclosed
Evidence · table
“0.51”
Context: 30.0
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 19.3
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
K-26-264Kwanika · silverGrade: 1.82Grade Unit: g/tIntercept: 30 mView all detailsHide details
Identity
- Hole ID
- K-26-264
- Project
- Kwanika
- Commodity
- silver
- Region
- canada_bc
- Reported Region
- canada_bc
- Ticker
- NWST.V
Geometry
- Grade
- 1.82
- Grade Unit
- g/t
- Intercept
- 30 m
- True Width
- 19.3 m
- From
- 411 m
- To
- 441 m
- Hole Depth
- 650 m
- Intercept Depth
- 411 m
Classification
- Deposit Type
- porphyry
- Program
- exploration
- Sample Type
- drill
- Group ID
- K-26-264:411-441
- Mining Method
- open_pit
Location
- Location
- Western Zone
- Easting
- 351325
- Northing
- 6156260
- CRS
- UTM Zone 10N NAD83
- EPSG
- 26910
- Elevation
- 1012 m
- Azimuth
- 0 °
- Dip
- -90 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- Activation Laboratories Ltd.
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Metal Equivalent
- Metal Eq. Grade
- 1.07
- Metal Eq. Unit
- % Cu-Eq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-10-21T00:00:00.000Z
Reasoning: The silver grade of 1.82 g/t over 30.0m is a minor byproduct credit for a porphyry system, but from a new structure.
Positive factors
- True Width Disclosed
- Step-Out Extension
- QA/QC Disclosed
Evidence · table
“1.82”
Context: 30.0
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 19.3
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
K-26-264Kwanika · palladiumGrade: 0.01Grade Unit: g/tIntercept: 30 mView all detailsHide details
Identity
- Hole ID
- K-26-264
- Project
- Kwanika
- Commodity
- palladium
- Region
- canada_bc
- Reported Region
- canada_bc
- Ticker
- NWST.V
Geometry
- Grade
- 0.01
- Grade Unit
- g/t
- Intercept
- 30 m
- True Width
- 19.3 m
- From
- 411 m
- To
- 441 m
- Hole Depth
- 650 m
- Intercept Depth
- 411 m
Classification
- Deposit Type
- porphyry
- Program
- exploration
- Sample Type
- drill
- Group ID
- K-26-264:411-441
- Mining Method
- open_pit
Location
- Location
- Western Zone
- Easting
- 351325
- Northing
- 6156260
- CRS
- UTM Zone 10N NAD83
- EPSG
- 26910
- Elevation
- 1012 m
- Azimuth
- 0 °
- Dip
- -90 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- Activation Laboratories Ltd.
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Metal Equivalent
- Metal Eq. Grade
- 1.07
- Metal Eq. Unit
- % Cu-Eq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-10-21T00:00:00.000Z
Reasoning: The palladium grade of 0.01 g/t over 30.0m is a very low byproduct credit, but from a new structure.
Positive factors
- True Width Disclosed
- Step-Out Extension
- QA/QC Disclosed
Evidence · table
“0.01”
Context: 30.0
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 19.3
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
K-26-264Kwanika · copperGrade: 0.57Grade Unit: %Intercept: 18 mView all detailsHide details
Identity
- Hole ID
- K-26-264
- Project
- Kwanika
- Commodity
- copper
- Region
- canada_bc
- Reported Region
- canada_bc
- Ticker
- NWST.V
Geometry
- Grade
- 0.57
- Grade Unit
- %
- Intercept
- 18 m
- True Width
- 11.6 m
- From
- 411 m
- To
- 429 m
- Hole Depth
- 650 m
- Intercept Depth
- 411 m
Classification
- Deposit Type
- porphyry
- Program
- exploration
- Sample Type
- drill
- Group ID
- K-26-264:411-429
- Mining Method
- open_pit
Location
- Location
- Western Zone
- Easting
- 351325
- Northing
- 6156260
- CRS
- UTM Zone 10N NAD83
- EPSG
- 26910
- Elevation
- 1012 m
- Azimuth
- 0 °
- Dip
- -90 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- Activation Laboratories Ltd.
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Metal Equivalent
- Metal Eq. Grade
- 1.42
- Metal Eq. Unit
- % CuEq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-10-21T00:00:00.000Z
Reasoning: The CuEq grade of 1.42% over 18.0m is a very strong result for a porphyry, part of a new mineralized structure.
Positive factors
- Step-Out Extension
- QA/QC Disclosed
Evidence · table
“1.42”
Context: 18.0
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 11.6
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
K-26-264Kwanika · goldGrade: 0.78Grade Unit: g/tIntercept: 18 mView all detailsHide details
Identity
- Hole ID
- K-26-264
- Project
- Kwanika
- Commodity
- gold
- Region
- canada_bc
- Reported Region
- canada_bc
- Ticker
- NWST.V
Geometry
- Grade
- 0.78
- Grade Unit
- g/t
- Intercept
- 18 m
- True Width
- 11.6 m
- From
- 411 m
- To
- 429 m
- Hole Depth
- 650 m
- Intercept Depth
- 411 m
Classification
- Deposit Type
- porphyry
- Program
- exploration
- Sample Type
- drill
- Group ID
- K-26-264:411-429
- Mining Method
- open_pit
Location
- Location
- Western Zone
- Easting
- 351325
- Northing
- 6156260
- CRS
- UTM Zone 10N NAD83
- EPSG
- 26910
- Elevation
- 1012 m
- Azimuth
- 0 °
- Dip
- -90 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- Activation Laboratories Ltd.
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Metal Equivalent
- Metal Eq. Grade
- 1.42
- Metal Eq. Unit
- % Cu-Eq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-10-21T00:00:00.000Z
Reasoning: The gold sub-interval of 18.0m at 0.78 g/t is a good grade and width for a porphyry, part of a new mineralized structure.
Positive factors
- Step-Out Extension
- QA/QC Disclosed
Evidence · table
“0.78”
Context: 18.0
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 11.6
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
K-26-264Kwanika · silverGrade: 1.74Grade Unit: g/tIntercept: 18 mView all detailsHide details
Identity
- Hole ID
- K-26-264
- Project
- Kwanika
- Commodity
- silver
- Region
- canada_bc
- Reported Region
- canada_bc
- Ticker
- NWST.V
Geometry
- Grade
- 1.74
- Grade Unit
- g/t
- Intercept
- 18 m
- True Width
- 11.6 m
- From
- 411 m
- To
- 429 m
- Hole Depth
- 650 m
- Intercept Depth
- 411 m
Classification
- Deposit Type
- porphyry
- Program
- exploration
- Sample Type
- drill
- Group ID
- K-26-264:411-429
- Mining Method
- open_pit
Location
- Location
- Western Zone
- Easting
- 351325
- Northing
- 6156260
- CRS
- UTM Zone 10N NAD83
- EPSG
- 26910
- Elevation
- 1012 m
- Azimuth
- 0 °
- Dip
- -90 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- Activation Laboratories Ltd.
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Metal Equivalent
- Metal Eq. Grade
- 1.42
- Metal Eq. Unit
- % Cu-Eq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-10-21T00:00:00.000Z
Reasoning: The silver grade of 1.74 g/t over 18.0m is a minor byproduct credit for a porphyry system, but from a new structure.
Positive factors
- Step-Out Extension
- QA/QC Disclosed
Evidence · table
“1.74”
Context: 18.0
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 11.6
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
K-26-264Kwanika · palladiumGrade: 0.01Grade Unit: g/tIntercept: 18 mView all detailsHide details
Identity
- Hole ID
- K-26-264
- Project
- Kwanika
- Commodity
- palladium
- Region
- canada_bc
- Reported Region
- canada_bc
- Ticker
- NWST.V
Geometry
- Grade
- 0.01
- Grade Unit
- g/t
- Intercept
- 18 m
- True Width
- 11.6 m
- From
- 411 m
- To
- 429 m
- Hole Depth
- 650 m
- Intercept Depth
- 411 m
Classification
- Deposit Type
- porphyry
- Program
- exploration
- Sample Type
- drill
- Group ID
- K-26-264:411-429
- Mining Method
- open_pit
Location
- Location
- Western Zone
- Easting
- 351325
- Northing
- 6156260
- CRS
- UTM Zone 10N NAD83
- EPSG
- 26910
- Elevation
- 1012 m
- Azimuth
- 0 °
- Dip
- -90 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- Activation Laboratories Ltd.
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Metal Equivalent
- Metal Eq. Grade
- 1.42
- Metal Eq. Unit
- % Cu-Eq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-10-21T00:00:00.000Z
Reasoning: The palladium grade of 0.01 g/t over 18.0m is a very low byproduct credit, but from a new structure.
Positive factors
- Step-Out Extension
- QA/QC Disclosed
Evidence · table
“0.01”
Context: 18.0
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 11.6
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
K-26-264Kwanika · copperGrade: 0.38Grade Unit: %Intercept: 50.9 mView all detailsHide details
Identity
- Hole ID
- K-26-264
- Project
- Kwanika
- Commodity
- copper
- Region
- canada_bc
- Reported Region
- canada_bc
- Ticker
- NWST.V
Geometry
- Grade
- 0.38
- Grade Unit
- %
- Intercept
- 50.9 m
- True Width
- 32.7 m
- From
- 487 m
- To
- 537.9 m
- Hole Depth
- 650 m
- Intercept Depth
- 411 m
Classification
- Deposit Type
- porphyry
- Program
- resource
- Sample Type
- drill
- Group ID
- K-26-264:487-537.9
- Mining Method
- open_pit
Location
- Location
- Western Zone
- Easting
- 351325
- Northing
- 6156260
- CRS
- UTM Zone 10N NAD83
- EPSG
- 26910
- Elevation
- 1012 m
- Azimuth
- 0 °
- Dip
- -90 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- Activation Laboratories Ltd.
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Metal Equivalent
- Metal Eq. Grade
- 1.19
- Metal Eq. Unit
- % CuEq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-10-21T00:00:00.000Z
Reasoning: The CuEq grade of 1.19% over 50.9m is a strong result for a porphyry, confirming continuity and supporting resource classification.
Positive factors
- True Width Disclosed
- QA/QC Disclosed
- Infill Drilling
Evidence · table
“1.19”
Context: 50.9
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 32.7
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
K-26-264Kwanika · goldGrade: 0.73Grade Unit: g/tIntercept: 50.9 mView all detailsHide details
Identity
- Hole ID
- K-26-264
- Project
- Kwanika
- Commodity
- gold
- Region
- canada_bc
- Reported Region
- canada_bc
- Ticker
- NWST.V
Geometry
- Grade
- 0.73
- Grade Unit
- g/t
- Intercept
- 50.9 m
- True Width
- 32.7 m
- From
- 487 m
- To
- 537.9 m
- Hole Depth
- 650 m
- Intercept Depth
- 411 m
Classification
- Deposit Type
- porphyry
- Program
- resource
- Sample Type
- drill
- Group ID
- K-26-264:487-537.9
- Mining Method
- open_pit
Location
- Location
- Western Zone
- Easting
- 351325
- Northing
- 6156260
- CRS
- UTM Zone 10N NAD83
- EPSG
- 26910
- Elevation
- 1012 m
- Azimuth
- 0 °
- Dip
- -90 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- Activation Laboratories Ltd.
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Metal Equivalent
- Metal Eq. Grade
- 1.19
- Metal Eq. Unit
- % Cu-Eq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-10-21T00:00:00.000Z
Reasoning: The gold intercept of 50.9m at 0.73 g/t is a good width and grade for a porphyry, contributing to resource confidence.
Positive factors
- True Width Disclosed
- QA/QC Disclosed
- Infill Drilling
Evidence · table
“0.73”
Context: 50.9
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 32.7
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
K-26-264Kwanika · silverGrade: 2.22Grade Unit: g/tIntercept: 50.9 mView all detailsHide details
Identity
- Hole ID
- K-26-264
- Project
- Kwanika
- Commodity
- silver
- Region
- canada_bc
- Reported Region
- canada_bc
- Ticker
- NWST.V
Geometry
- Grade
- 2.22
- Grade Unit
- g/t
- Intercept
- 50.9 m
- True Width
- 32.7 m
- From
- 487 m
- To
- 537.9 m
- Hole Depth
- 650 m
- Intercept Depth
- 411 m
Classification
- Deposit Type
- porphyry
- Program
- resource
- Sample Type
- drill
- Group ID
- K-26-264:487-537.9
- Mining Method
- open_pit
Location
- Location
- Western Zone
- Easting
- 351325
- Northing
- 6156260
- CRS
- UTM Zone 10N NAD83
- EPSG
- 26910
- Elevation
- 1012 m
- Azimuth
- 0 °
- Dip
- -90 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- Activation Laboratories Ltd.
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Metal Equivalent
- Metal Eq. Grade
- 1.19
- Metal Eq. Unit
- % Cu-Eq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-10-21T00:00:00.000Z
Reasoning: The silver grade of 2.22 g/t over 50.9m is a minor byproduct credit for a porphyry system.
Positive factors
- True Width Disclosed
- QA/QC Disclosed
- Infill Drilling
Evidence · table
“2.22”
Context: 50.9
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 32.7
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
K-26-264Kwanika · palladiumGrade: 0.01Grade Unit: g/tIntercept: 50.9 mView all detailsHide details
Identity
- Hole ID
- K-26-264
- Project
- Kwanika
- Commodity
- palladium
- Region
- canada_bc
- Reported Region
- canada_bc
- Ticker
- NWST.V
Geometry
- Grade
- 0.01
- Grade Unit
- g/t
- Intercept
- 50.9 m
- True Width
- 32.7 m
- From
- 487 m
- To
- 537.9 m
- Hole Depth
- 650 m
- Intercept Depth
- 411 m
Classification
- Deposit Type
- porphyry
- Program
- resource
- Sample Type
- drill
- Group ID
- K-26-264:487-537.9
- Mining Method
- open_pit
Location
- Location
- Western Zone
- Easting
- 351325
- Northing
- 6156260
- CRS
- UTM Zone 10N NAD83
- EPSG
- 26910
- Elevation
- 1012 m
- Azimuth
- 0 °
- Dip
- -90 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- Activation Laboratories Ltd.
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Metal Equivalent
- Metal Eq. Grade
- 1.19
- Metal Eq. Unit
- % Cu-Eq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-10-21T00:00:00.000Z
Reasoning: The palladium grade of 0.01 g/t over 50.9m is a very low byproduct credit.
Positive factors
- True Width Disclosed
- QA/QC Disclosed
- Infill Drilling
Evidence · table
“0.01”
Context: 50.9
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 32.7
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
K-26-264Kwanika · copperGrade: 0.44Grade Unit: %Intercept: 34.9 mView all detailsHide details
Identity
- Hole ID
- K-26-264
- Project
- Kwanika
- Commodity
- copper
- Region
- canada_bc
- Reported Region
- canada_bc
- Ticker
- NWST.V
Geometry
- Grade
- 0.44
- Grade Unit
- %
- Intercept
- 34.9 m
- True Width
- 22.4 m
- From
- 503 m
- To
- 537.9 m
- Hole Depth
- 650 m
- Intercept Depth
- 411 m
Classification
- Deposit Type
- porphyry
- Program
- resource
- Sample Type
- drill
- Group ID
- K-26-264:503-537.9
- Mining Method
- open_pit
Location
- Location
- Western Zone
- Easting
- 351325
- Northing
- 6156260
- CRS
- UTM Zone 10N NAD83
- EPSG
- 26910
- Elevation
- 1012 m
- Azimuth
- 0 °
- Dip
- -90 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- Activation Laboratories Ltd.
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Metal Equivalent
- Metal Eq. Grade
- 1.48
- Metal Eq. Unit
- % CuEq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-10-21T00:00:00.000Z
Reasoning: The CuEq grade of 1.48% over 34.9m is a very strong result for a porphyry, enhancing resource confidence.
Positive factors
- QA/QC Disclosed
- Infill Drilling
Evidence · table
“1.48”
Context: 34.9
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 22.4
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
K-26-264Kwanika · goldGrade: 0.94Grade Unit: g/tIntercept: 34.9 mView all detailsHide details
Identity
- Hole ID
- K-26-264
- Project
- Kwanika
- Commodity
- gold
- Region
- canada_bc
- Reported Region
- canada_bc
- Ticker
- NWST.V
Geometry
- Grade
- 0.94
- Grade Unit
- g/t
- Intercept
- 34.9 m
- True Width
- 22.4 m
- From
- 503 m
- To
- 537.9 m
- Hole Depth
- 650 m
- Intercept Depth
- 411 m
Classification
- Deposit Type
- porphyry
- Program
- resource
- Sample Type
- drill
- Group ID
- K-26-264:503-537.9
- Mining Method
- open_pit
Location
- Location
- Western Zone
- Easting
- 351325
- Northing
- 6156260
- CRS
- UTM Zone 10N NAD83
- EPSG
- 26910
- Elevation
- 1012 m
- Azimuth
- 0 °
- Dip
- -90 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- Activation Laboratories Ltd.
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Metal Equivalent
- Metal Eq. Grade
- 1.48
- Metal Eq. Unit
- % Cu-Eq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-10-21T00:00:00.000Z
Reasoning: The gold sub-interval of 34.9m at 0.94 g/t is a strong grade and width for a porphyry, enhancing resource confidence.
Positive factors
- QA/QC Disclosed
- Infill Drilling
Evidence · table
“0.94”
Context: 34.9
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 22.4
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
K-26-264Kwanika · silverGrade: 2.57Grade Unit: g/tIntercept: 34.9 mView all detailsHide details
Identity
- Hole ID
- K-26-264
- Project
- Kwanika
- Commodity
- silver
- Region
- canada_bc
- Reported Region
- canada_bc
- Ticker
- NWST.V
Geometry
- Grade
- 2.57
- Grade Unit
- g/t
- Intercept
- 34.9 m
- True Width
- 22.4 m
- From
- 503 m
- To
- 537.9 m
- Hole Depth
- 650 m
- Intercept Depth
- 411 m
Classification
- Deposit Type
- porphyry
- Program
- resource
- Sample Type
- drill
- Group ID
- K-26-264:503-537.9
- Mining Method
- open_pit
Location
- Location
- Western Zone
- Easting
- 351325
- Northing
- 6156260
- CRS
- UTM Zone 10N NAD83
- EPSG
- 26910
- Elevation
- 1012 m
- Azimuth
- 0 °
- Dip
- -90 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- Activation Laboratories Ltd.
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Metal Equivalent
- Metal Eq. Grade
- 1.48
- Metal Eq. Unit
- % Cu-Eq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-10-21T00:00:00.000Z
Reasoning: The silver grade of 2.57 g/t over 34.9m is a minor byproduct credit for a porphyry system.
Positive factors
- QA/QC Disclosed
- Infill Drilling
Evidence · table
“2.57”
Context: 34.9
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 22.4
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
K-26-264Kwanika · palladiumGrade: 0.01Grade Unit: g/tIntercept: 34.9 mView all detailsHide details
Identity
- Hole ID
- K-26-264
- Project
- Kwanika
- Commodity
- palladium
- Region
- canada_bc
- Reported Region
- canada_bc
- Ticker
- NWST.V
Geometry
- Grade
- 0.01
- Grade Unit
- g/t
- Intercept
- 34.9 m
- True Width
- 22.4 m
- From
- 503 m
- To
- 537.9 m
- Hole Depth
- 650 m
- Intercept Depth
- 411 m
Classification
- Deposit Type
- porphyry
- Program
- resource
- Sample Type
- drill
- Group ID
- K-26-264:503-537.9
- Mining Method
- open_pit
Location
- Location
- Western Zone
- Easting
- 351325
- Northing
- 6156260
- CRS
- UTM Zone 10N NAD83
- EPSG
- 26910
- Elevation
- 1012 m
- Azimuth
- 0 °
- Dip
- -90 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- Activation Laboratories Ltd.
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Metal Equivalent
- Metal Eq. Grade
- 1.48
- Metal Eq. Unit
- % Cu-Eq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-10-21T00:00:00.000Z
Reasoning: The palladium grade of 0.01 g/t over 34.9m is a very low byproduct credit.
Positive factors
- QA/QC Disclosed
- Infill Drilling
Evidence · table
“0.01”
Context: 34.9
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 22.4
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
K-26-264Kwanika · copperGrade: 0.15Grade Unit: %Intercept: 10.6 mView all detailsHide details
Identity
- Hole ID
- K-26-264
- Project
- Kwanika
- Commodity
- copper
- Region
- canada_bc
- Reported Region
- canada_bc
- Ticker
- NWST.V
Geometry
- Grade
- 0.15
- Grade Unit
- %
- Intercept
- 10.6 m
- True Width
- 6.8 m
- From
- 601.8 m
- To
- 612.4 m
- Hole Depth
- 650 m
- Intercept Depth
- 411 m
Classification
- Deposit Type
- porphyry
- Program
- resource
- Sample Type
- drill
- Group ID
- K-26-264:601.8-612.4
- Mining Method
- open_pit
Location
- Location
- Western Zone
- Easting
- 351325
- Northing
- 6156260
- CRS
- UTM Zone 10N NAD83
- EPSG
- 26910
- Elevation
- 1012 m
- Azimuth
- 0 °
- Dip
- -90 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- Activation Laboratories Ltd.
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Metal Equivalent
- Metal Eq. Grade
- 0.76
- Metal Eq. Unit
- % CuEq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-10-21T00:00:00.000Z
Reasoning: The CuEq grade of 0.76% over 10.6m is a moderate result for a porphyry, contributing to overall continuity.
Positive factors
- True Width Disclosed
- QA/QC Disclosed
- Infill Drilling
Evidence · table
“0.76”
Context: 10.6
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 6.8
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
K-26-264Kwanika · goldGrade: 0.56Grade Unit: g/tIntercept: 10.6 mView all detailsHide details
Identity
- Hole ID
- K-26-264
- Project
- Kwanika
- Commodity
- gold
- Region
- canada_bc
- Reported Region
- canada_bc
- Ticker
- NWST.V
Geometry
- Grade
- 0.56
- Grade Unit
- g/t
- Intercept
- 10.6 m
- True Width
- 6.8 m
- From
- 601.8 m
- To
- 612.4 m
- Hole Depth
- 650 m
- Intercept Depth
- 411 m
Classification
- Deposit Type
- porphyry
- Program
- resource
- Sample Type
- drill
- Group ID
- K-26-264:601.8-612.4
- Mining Method
- open_pit
Location
- Location
- Western Zone
- Easting
- 351325
- Northing
- 6156260
- CRS
- UTM Zone 10N NAD83
- EPSG
- 26910
- Elevation
- 1012 m
- Azimuth
- 0 °
- Dip
- -90 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- Activation Laboratories Ltd.
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Metal Equivalent
- Metal Eq. Grade
- 0.76
- Metal Eq. Unit
- % Cu-Eq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-10-21T00:00:00.000Z
Reasoning: The gold intercept of 10.6m at 0.56 g/t is a moderate grade and width for a porphyry, contributing to overall continuity.
Positive factors
- True Width Disclosed
- QA/QC Disclosed
- Infill Drilling
Evidence · table
“0.56”
Context: 10.6
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 6.8
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
K-26-264Kwanika · silverGrade: 0.83Grade Unit: g/tIntercept: 10.6 mView all detailsHide details
Identity
- Hole ID
- K-26-264
- Project
- Kwanika
- Commodity
- silver
- Region
- canada_bc
- Reported Region
- canada_bc
- Ticker
- NWST.V
Geometry
- Grade
- 0.83
- Grade Unit
- g/t
- Intercept
- 10.6 m
- True Width
- 6.8 m
- From
- 601.8 m
- To
- 612.4 m
- Hole Depth
- 650 m
- Intercept Depth
- 411 m
Classification
- Deposit Type
- porphyry
- Program
- resource
- Sample Type
- drill
- Group ID
- K-26-264:601.8-612.4
- Mining Method
- open_pit
Location
- Location
- Western Zone
- Easting
- 351325
- Northing
- 6156260
- CRS
- UTM Zone 10N NAD83
- EPSG
- 26910
- Elevation
- 1012 m
- Azimuth
- 0 °
- Dip
- -90 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- Activation Laboratories Ltd.
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Metal Equivalent
- Metal Eq. Grade
- 0.76
- Metal Eq. Unit
- % Cu-Eq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-10-21T00:00:00.000Z
Reasoning: The silver grade of 0.83 g/t over 10.6m is a minor byproduct credit for a porphyry system.
Positive factors
- True Width Disclosed
- QA/QC Disclosed
- Infill Drilling
Evidence · table
“0.83”
Context: 10.6
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 6.8
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
K-26-264Kwanika · palladiumGrade: 0.04Grade Unit: g/tIntercept: 10.6 mView all detailsHide details
Identity
- Hole ID
- K-26-264
- Project
- Kwanika
- Commodity
- palladium
- Region
- canada_bc
- Reported Region
- canada_bc
- Ticker
- NWST.V
Geometry
- Grade
- 0.04
- Grade Unit
- g/t
- Intercept
- 10.6 m
- True Width
- 6.8 m
- From
- 601.8 m
- To
- 612.4 m
- Hole Depth
- 650 m
- Intercept Depth
- 411 m
Classification
- Deposit Type
- porphyry
- Program
- resource
- Sample Type
- drill
- Group ID
- K-26-264:601.8-612.4
- Mining Method
- open_pit
Location
- Location
- Western Zone
- Easting
- 351325
- Northing
- 6156260
- CRS
- UTM Zone 10N NAD83
- EPSG
- 26910
- Elevation
- 1012 m
- Azimuth
- 0 °
- Dip
- -90 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- Activation Laboratories Ltd.
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Metal Equivalent
- Metal Eq. Grade
- 0.76
- Metal Eq. Unit
- % Cu-Eq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-10-21T00:00:00.000Z
Reasoning: The palladium grade of 0.04 g/t over 10.6m is a very low byproduct credit, but noted as elevated palladium values.
Positive factors
- True Width Disclosed
- QA/QC Disclosed
- Infill Drilling
Evidence · table
“0.04”
Context: 10.6
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 6.8
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
K-26-264Kwanika · copperGrade: 0.25Grade Unit: %Intercept: 9 mView all detailsHide details
Identity
- Hole ID
- K-26-264
- Project
- Kwanika
- Commodity
- copper
- Region
- canada_bc
- Reported Region
- canada_bc
- Ticker
- NWST.V
Geometry
- Grade
- 0.25
- Grade Unit
- %
- Intercept
- 9 m
- True Width
- 5.8 m
- From
- 638 m
- To
- 647 m
- Hole Depth
- 650 m
- Intercept Depth
- 411 m
Classification
- Deposit Type
- porphyry
- Program
- resource
- Sample Type
- drill
- Group ID
- K-26-264:638-647
- Mining Method
- open_pit
Location
- Location
- Western Zone
- Easting
- 351325
- Northing
- 6156260
- CRS
- UTM Zone 10N NAD83
- EPSG
- 26910
- Elevation
- 1012 m
- Azimuth
- 0 °
- Dip
- -90 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- Activation Laboratories Ltd.
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Metal Equivalent
- Metal Eq. Grade
- 0.85
- Metal Eq. Unit
- % CuEq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-10-21T00:00:00.000Z
Reasoning: The CuEq grade of 0.85% over 9.0m is a good result for a porphyry, contributing to overall continuity.
Positive factors
- True Width Disclosed
- QA/QC Disclosed
- Infill Drilling
Evidence · table
“0.85”
Context: 9.0
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 5.8
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
K-26-264Kwanika · goldGrade: 0.55Grade Unit: g/tIntercept: 9 mView all detailsHide details
Identity
- Hole ID
- K-26-264
- Project
- Kwanika
- Commodity
- gold
- Region
- canada_bc
- Reported Region
- canada_bc
- Ticker
- NWST.V
Geometry
- Grade
- 0.55
- Grade Unit
- g/t
- Intercept
- 9 m
- True Width
- 5.8 m
- From
- 638 m
- To
- 647 m
- Hole Depth
- 650 m
- Intercept Depth
- 411 m
Classification
- Deposit Type
- porphyry
- Program
- resource
- Sample Type
- drill
- Group ID
- K-26-264:638-647
- Mining Method
- open_pit
Location
- Location
- Western Zone
- Easting
- 351325
- Northing
- 6156260
- CRS
- UTM Zone 10N NAD83
- EPSG
- 26910
- Elevation
- 1012 m
- Azimuth
- 0 °
- Dip
- -90 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- Activation Laboratories Ltd.
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Metal Equivalent
- Metal Eq. Grade
- 0.85
- Metal Eq. Unit
- % Cu-Eq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-10-21T00:00:00.000Z
Reasoning: The gold intercept of 9.0m at 0.55 g/t is a moderate grade and narrow width for a porphyry, contributing to overall continuity.
Positive factors
- True Width Disclosed
- QA/QC Disclosed
- Infill Drilling
Evidence · table
“0.55”
Context: 9.0
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 5.8
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
K-26-264Kwanika · silverGrade: 1.1Grade Unit: g/tIntercept: 9 mView all detailsHide details
Identity
- Hole ID
- K-26-264
- Project
- Kwanika
- Commodity
- silver
- Region
- canada_bc
- Reported Region
- canada_bc
- Ticker
- NWST.V
Geometry
- Grade
- 1.1
- Grade Unit
- g/t
- Intercept
- 9 m
- True Width
- 5.8 m
- From
- 638 m
- To
- 647 m
- Hole Depth
- 650 m
- Intercept Depth
- 411 m
Classification
- Deposit Type
- porphyry
- Program
- resource
- Sample Type
- drill
- Group ID
- K-26-264:638-647
- Mining Method
- open_pit
Location
- Location
- Western Zone
- Easting
- 351325
- Northing
- 6156260
- CRS
- UTM Zone 10N NAD83
- EPSG
- 26910
- Elevation
- 1012 m
- Azimuth
- 0 °
- Dip
- -90 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- Activation Laboratories Ltd.
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Metal Equivalent
- Metal Eq. Grade
- 0.85
- Metal Eq. Unit
- % Cu-Eq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-10-21T00:00:00.000Z
Reasoning: The silver grade of 1.10 g/t over 9.0m is a minor byproduct credit for a porphyry system.
Positive factors
- True Width Disclosed
- QA/QC Disclosed
- Infill Drilling
Evidence · table
“1.10”
Context: 9.0
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 5.8
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
K-26-264Kwanika · palladiumGrade: 0.08Grade Unit: g/tIntercept: 9 mView all detailsHide details
Identity
- Hole ID
- K-26-264
- Project
- Kwanika
- Commodity
- palladium
- Region
- canada_bc
- Reported Region
- canada_bc
- Ticker
- NWST.V
Geometry
- Grade
- 0.08
- Grade Unit
- g/t
- Intercept
- 9 m
- True Width
- 5.8 m
- From
- 638 m
- To
- 647 m
- Hole Depth
- 650 m
- Intercept Depth
- 411 m
Classification
- Deposit Type
- porphyry
- Program
- resource
- Sample Type
- drill
- Group ID
- K-26-264:638-647
- Mining Method
- open_pit
Location
- Location
- Western Zone
- Easting
- 351325
- Northing
- 6156260
- CRS
- UTM Zone 10N NAD83
- EPSG
- 26910
- Elevation
- 1012 m
- Azimuth
- 0 °
- Dip
- -90 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- Activation Laboratories Ltd.
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Metal Equivalent
- Metal Eq. Grade
- 0.85
- Metal Eq. Unit
- % Cu-Eq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-10-21T00:00:00.000Z
Reasoning: The palladium grade of 0.08 g/t over 9.0m is a very low byproduct credit, but noted as elevated palladium values.
Positive factors
- True Width Disclosed
- QA/QC Disclosed
- Infill Drilling
Evidence · table
“0.08”
Context: 9.0
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 5.8
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
K-26-346Kwanika · copperGrade: 0.64Grade Unit: %Intercept: 110 mView all detailsHide details
Identity
- Hole ID
- K-26-346
- Project
- Kwanika
- Commodity
- copper
- Region
- canada_bc
- Reported Region
- canada_bc
- Ticker
- NWST.V
Geometry
- Grade
- 0.64
- Grade Unit
- %
- Intercept
- 110 m
- True Width
- 84.3 m
- From
- 378 m
- To
- 488 m
- Hole Depth
- 501 m
- Intercept Depth
- 378 m
Classification
- Deposit Type
- porphyry
- Program
- resource
- Sample Type
- drill
- Group ID
- K-26-346:378-488
- Mining Method
- open_pit
Location
- Location
- Western Zone
- Easting
- 351325
- Northing
- 6156208
- CRS
- UTM Zone 10N NAD83
- EPSG
- 26910
- Elevation
- 1002 m
- Azimuth
- 170 °
- Dip
- -80 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- Activation Laboratories Ltd.
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Metal Equivalent
- Metal Eq. Grade
- 1.86
- Metal Eq. Unit
- % CuEq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-10-21T00:00:00.000Z
Reasoning: The CuEq grade of 1.86% over 110.0m is an exceptional result for a porphyry, significantly enhancing resource confidence and demonstrating high-grade mineralization.
Positive factors
- Bonanza Intercept
- True Width Disclosed
- QA/QC Disclosed
- Infill Drilling
Evidence · table
“1.86”
Context: 110.0
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 84.3
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
K-26-346Kwanika · goldGrade: 1.1Grade Unit: g/tIntercept: 110 mView all detailsHide details
Identity
- Hole ID
- K-26-346
- Project
- Kwanika
- Commodity
- gold
- Region
- canada_bc
- Reported Region
- canada_bc
- Ticker
- NWST.V
Geometry
- Grade
- 1.1
- Grade Unit
- g/t
- Intercept
- 110 m
- True Width
- 84.3 m
- From
- 378 m
- To
- 488 m
- Hole Depth
- 501 m
- Intercept Depth
- 378 m
Classification
- Deposit Type
- porphyry
- Program
- resource
- Sample Type
- drill
- Group ID
- K-26-346:378-488
- Mining Method
- open_pit
Location
- Location
- Western Zone
- Easting
- 351325
- Northing
- 6156208
- CRS
- UTM Zone 10N NAD83
- EPSG
- 26910
- Elevation
- 1002 m
- Azimuth
- 170 °
- Dip
- -80 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- Activation Laboratories Ltd.
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Metal Equivalent
- Metal Eq. Grade
- 1.86
- Metal Eq. Unit
- % Cu-Eq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-10-21T00:00:00.000Z
Reasoning: The gold intercept of 110.0m at 1.10 g/t is a very strong grade and width for a porphyry, significantly enhancing resource confidence.
Positive factors
- True Width Disclosed
- QA/QC Disclosed
- Infill Drilling
Evidence · table
“1.10”
Context: 110.0
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 84.3
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
K-26-346Kwanika · silverGrade: 3.11Grade Unit: g/tIntercept: 110 mView all detailsHide details
Identity
- Hole ID
- K-26-346
- Project
- Kwanika
- Commodity
- silver
- Region
- canada_bc
- Reported Region
- canada_bc
- Ticker
- NWST.V
Geometry
- Grade
- 3.11
- Grade Unit
- g/t
- Intercept
- 110 m
- True Width
- 84.3 m
- From
- 378 m
- To
- 488 m
- Hole Depth
- 501 m
- Intercept Depth
- 378 m
Classification
- Deposit Type
- porphyry
- Program
- resource
- Sample Type
- drill
- Group ID
- K-26-346:378-488
- Mining Method
- open_pit
Location
- Location
- Western Zone
- Easting
- 351325
- Northing
- 6156208
- CRS
- UTM Zone 10N NAD83
- EPSG
- 26910
- Elevation
- 1002 m
- Azimuth
- 170 °
- Dip
- -80 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- Activation Laboratories Ltd.
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Metal Equivalent
- Metal Eq. Grade
- 1.86
- Metal Eq. Unit
- % Cu-Eq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-10-21T00:00:00.000Z
Reasoning: The silver grade of 3.11 g/t over 110.0m is a moderate byproduct credit for a porphyry system.
Positive factors
- True Width Disclosed
- QA/QC Disclosed
- Infill Drilling
Evidence · table
“3.11”
Context: 110.0
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 84.3
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
K-26-346Kwanika · palladiumGrade: 0.06Grade Unit: g/tIntercept: 110 mView all detailsHide details
Identity
- Hole ID
- K-26-346
- Project
- Kwanika
- Commodity
- palladium
- Region
- canada_bc
- Reported Region
- canada_bc
- Ticker
- NWST.V
Geometry
- Grade
- 0.06
- Grade Unit
- g/t
- Intercept
- 110 m
- True Width
- 84.3 m
- From
- 378 m
- To
- 488 m
- Hole Depth
- 501 m
- Intercept Depth
- 378 m
Classification
- Deposit Type
- porphyry
- Program
- resource
- Sample Type
- drill
- Group ID
- K-26-346:378-488
- Mining Method
- open_pit
Location
- Location
- Western Zone
- Easting
- 351325
- Northing
- 6156208
- CRS
- UTM Zone 10N NAD83
- EPSG
- 26910
- Elevation
- 1002 m
- Azimuth
- 170 °
- Dip
- -80 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- Activation Laboratories Ltd.
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Metal Equivalent
- Metal Eq. Grade
- 1.86
- Metal Eq. Unit
- % Cu-Eq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-10-21T00:00:00.000Z
Reasoning: The palladium grade of 0.06 g/t over 110.0m is a very low byproduct credit, but noted as persistent palladium enrichment.
Positive factors
- True Width Disclosed
- QA/QC Disclosed
- Infill Drilling
Evidence · table
“0.06”
Context: 110.0
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 84.3
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
K-26-346Kwanika · copperGrade: 0.34Grade Unit: %Intercept: 10 mView all detailsHide details
Identity
- Hole ID
- K-26-346
- Project
- Kwanika
- Commodity
- copper
- Region
- canada_bc
- Reported Region
- canada_bc
- Ticker
- NWST.V
Geometry
- Grade
- 0.34
- Grade Unit
- %
- Intercept
- 10 m
- True Width
- 7.7 m
- From
- 378 m
- To
- 388 m
- Hole Depth
- 501 m
- Intercept Depth
- 378 m
Classification
- Deposit Type
- porphyry
- Program
- resource
- Sample Type
- drill
- Group ID
- K-26-346:378-388
- Mining Method
- open_pit
Location
- Location
- Western Zone
- Easting
- 351325
- Northing
- 6156208
- CRS
- UTM Zone 10N NAD83
- EPSG
- 26910
- Elevation
- 1002 m
- Azimuth
- 170 °
- Dip
- -80 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- Activation Laboratories Ltd.
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Metal Equivalent
- Metal Eq. Grade
- 0.9
- Metal Eq. Unit
- % CuEq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-10-21T00:00:00.000Z
Reasoning: The CuEq grade of 0.90% over 10.0m is a good result for a porphyry, contributing to overall continuity.
Positive factors
- QA/QC Disclosed
- Infill Drilling
Evidence · table
“0.90”
Context: 10.0
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 7.7
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
K-26-346Kwanika · goldGrade: 0.5Grade Unit: g/tIntercept: 10 mView all detailsHide details
Identity
- Hole ID
- K-26-346
- Project
- Kwanika
- Commodity
- gold
- Region
- canada_bc
- Reported Region
- canada_bc
- Ticker
- NWST.V
Geometry
- Grade
- 0.5
- Grade Unit
- g/t
- Intercept
- 10 m
- True Width
- 7.7 m
- From
- 378 m
- To
- 388 m
- Hole Depth
- 501 m
- Intercept Depth
- 378 m
Classification
- Deposit Type
- porphyry
- Program
- resource
- Sample Type
- drill
- Group ID
- K-26-346:378-388
- Mining Method
- open_pit
Location
- Location
- Western Zone
- Easting
- 351325
- Northing
- 6156208
- CRS
- UTM Zone 10N NAD83
- EPSG
- 26910
- Elevation
- 1002 m
- Azimuth
- 170 °
- Dip
- -80 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- Activation Laboratories Ltd.
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Metal Equivalent
- Metal Eq. Grade
- 0.9
- Metal Eq. Unit
- % Cu-Eq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-10-21T00:00:00.000Z
Reasoning: The gold sub-interval of 10.0m at 0.50 g/t is a moderate grade and narrow width for a porphyry, contributing to overall continuity.
Positive factors
- QA/QC Disclosed
- Infill Drilling
Evidence · table
“0.50”
Context: 10.0
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 7.7
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
K-26-346Kwanika · silverGrade: 2.32Grade Unit: g/tIntercept: 10 mView all detailsHide details
Identity
- Hole ID
- K-26-346
- Project
- Kwanika
- Commodity
- silver
- Region
- canada_bc
- Reported Region
- canada_bc
- Ticker
- NWST.V
Geometry
- Grade
- 2.32
- Grade Unit
- g/t
- Intercept
- 10 m
- True Width
- 7.7 m
- From
- 378 m
- To
- 388 m
- Hole Depth
- 501 m
- Intercept Depth
- 378 m
Classification
- Deposit Type
- porphyry
- Program
- resource
- Sample Type
- drill
- Group ID
- K-26-346:378-388
- Mining Method
- open_pit
Location
- Location
- Western Zone
- Easting
- 351325
- Northing
- 6156208
- CRS
- UTM Zone 10N NAD83
- EPSG
- 26910
- Elevation
- 1002 m
- Azimuth
- 170 °
- Dip
- -80 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- Activation Laboratories Ltd.
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Metal Equivalent
- Metal Eq. Grade
- 0.9
- Metal Eq. Unit
- % Cu-Eq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-10-21T00:00:00.000Z
Reasoning: The silver grade of 2.32 g/t over 10.0m is a minor byproduct credit for a porphyry system.
Positive factors
- QA/QC Disclosed
- Infill Drilling
Evidence · table
“2.32”
Context: 10.0
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 7.7
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
K-26-346Kwanika · palladiumGrade: 0.01Grade Unit: g/tIntercept: 10 mView all detailsHide details
Identity
- Hole ID
- K-26-346
- Project
- Kwanika
- Commodity
- palladium
- Region
- canada_bc
- Reported Region
- canada_bc
- Ticker
- NWST.V
Geometry
- Grade
- 0.01
- Grade Unit
- g/t
- Intercept
- 10 m
- True Width
- 7.7 m
- From
- 378 m
- To
- 388 m
- Hole Depth
- 501 m
- Intercept Depth
- 378 m
Classification
- Deposit Type
- porphyry
- Program
- resource
- Sample Type
- drill
- Group ID
- K-26-346:378-388
- Mining Method
- open_pit
Location
- Location
- Western Zone
- Easting
- 351325
- Northing
- 6156208
- CRS
- UTM Zone 10N NAD83
- EPSG
- 26910
- Elevation
- 1002 m
- Azimuth
- 170 °
- Dip
- -80 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- Activation Laboratories Ltd.
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Metal Equivalent
- Metal Eq. Grade
- 0.9
- Metal Eq. Unit
- % Cu-Eq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-10-21T00:00:00.000Z
Reasoning: The palladium grade of 0.01 g/t over 10.0m is a very low byproduct credit.
Positive factors
- QA/QC Disclosed
- Infill Drilling
Evidence · table
“0.01”
Context: 10.0
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 7.7
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
K-26-346Kwanika · copperIntercept: 16.1 mView all detailsHide details
Identity
- Hole ID
- K-26-346
- Project
- Kwanika
- Commodity
- copper
- Region
- canada_bc
- Reported Region
- canada_bc
- Ticker
- NWST.V
Geometry
- Intercept
- 16.1 m
- From
- 392.5 m
- To
- 408.6 m
- Hole Depth
- 501 m
- Intercept Depth
- 378 m
Classification
- Deposit Type
- porphyry
- Program
- resource
- Sample Type
- drill
- Group ID
- K-26-346:392.5-408.6
- Mining Method
- open_pit
Location
- Location
- Western Zone
- Easting
- 351325
- Northing
- 6156208
- CRS
- UTM Zone 10N NAD83
- EPSG
- 26910
- Elevation
- 1002 m
- Azimuth
- 170 °
- Dip
- -80 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- Activation Laboratories Ltd.
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Metal Equivalent
- Metal Eq. Grade
- 4.37
- Metal Eq. Unit
- % CuEq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-10-21T00:00:00.000Z
Reasoning: The CuEq grade of 4.37% over 16.1m is an exceptional result for a porphyry, demonstrating high-grade mineralization within the broader intercept.
Positive factors
- Bonanza Intercept
- QA/QC Disclosed
- Infill Drilling
Evidence · table
“4.37”
Context: 16.1
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
K-26-346Kwanika · goldGrade: 3.03Grade Unit: g/tIntercept: 16.1 mView all detailsHide details
Identity
- Hole ID
- K-26-346
- Project
- Kwanika
- Commodity
- gold
- Region
- canada_bc
- Reported Region
- canada_bc
- Ticker
- NWST.V
Geometry
- Grade
- 3.03
- Grade Unit
- g/t
- Intercept
- 16.1 m
- From
- 392.5 m
- To
- 408.6 m
- Hole Depth
- 501 m
- Intercept Depth
- 378 m
Classification
- Deposit Type
- porphyry
- Program
- resource
- Sample Type
- drill
- Group ID
- K-26-346:392.5-408.6
- Mining Method
- open_pit
Location
- Location
- Western Zone
- Easting
- 351325
- Northing
- 6156208
- CRS
- UTM Zone 10N NAD83
- EPSG
- 26910
- Elevation
- 1002 m
- Azimuth
- 170 °
- Dip
- -80 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- Activation Laboratories Ltd.
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Metal Equivalent
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-10-21T00:00:00.000Z
Reasoning: The gold sub-interval of 16.1m at 3.03 g/t is a very strong grade and good width for a porphyry, enhancing resource confidence.
Positive factors
- QA/QC Disclosed
- Infill Drilling
Evidence · table
“3.03”
Context: 16.1
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
K-26-346Kwanika · silverGrade: 4.23Grade Unit: g/tIntercept: 16.1 mView all detailsHide details
Identity
- Hole ID
- K-26-346
- Project
- Kwanika
- Commodity
- silver
- Region
- canada_bc
- Reported Region
- canada_bc
- Ticker
- NWST.V
Geometry
- Grade
- 4.23
- Grade Unit
- g/t
- Intercept
- 16.1 m
- From
- 392.5 m
- To
- 408.6 m
- Hole Depth
- 501 m
- Intercept Depth
- 378 m
Classification
- Deposit Type
- porphyry
- Program
- resource
- Sample Type
- drill
- Group ID
- K-26-346:392.5-408.6
- Mining Method
- open_pit
Location
- Location
- Western Zone
- Easting
- 351325
- Northing
- 6156208
- CRS
- UTM Zone 10N NAD83
- EPSG
- 26910
- Elevation
- 1002 m
- Azimuth
- 170 °
- Dip
- -80 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- Activation Laboratories Ltd.
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Metal Equivalent
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-10-21T00:00:00.000Z
Reasoning: The silver grade of 4.23 g/t over 16.1m is a moderate byproduct credit for a porphyry system.
Positive factors
- QA/QC Disclosed
- Infill Drilling
Evidence · table
“4.23”
Context: 16.1
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
K-26-346Kwanika · palladiumGrade: 0.05Grade Unit: g/tIntercept: 16.1 mView all detailsHide details
Identity
- Hole ID
- K-26-346
- Project
- Kwanika
- Commodity
- palladium
- Region
- canada_bc
- Reported Region
- canada_bc
- Ticker
- NWST.V
Geometry
- Grade
- 0.05
- Grade Unit
- g/t
- Intercept
- 16.1 m
- From
- 392.5 m
- To
- 408.6 m
- Hole Depth
- 501 m
- Intercept Depth
- 378 m
Classification
- Deposit Type
- porphyry
- Program
- resource
- Sample Type
- drill
- Group ID
- K-26-346:392.5-408.6
- Mining Method
- open_pit
Location
- Location
- Western Zone
- Easting
- 351325
- Northing
- 6156208
- CRS
- UTM Zone 10N NAD83
- EPSG
- 26910
- Elevation
- 1002 m
- Azimuth
- 170 °
- Dip
- -80 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- Activation Laboratories Ltd.
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Metal Equivalent
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-10-21T00:00:00.000Z
Reasoning: The palladium grade of 0.05 g/t over 16.1m is a very low byproduct credit.
Positive factors
- QA/QC Disclosed
- Infill Drilling
Evidence · table
“0.05”
Context: 16.1
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
K-26-346Kwanika · copperIntercept: 39.8 mView all detailsHide details
Identity
- Hole ID
- K-26-346
- Project
- Kwanika
- Commodity
- copper
- Region
- canada_bc
- Reported Region
- canada_bc
- Ticker
- NWST.V
Geometry
- Intercept
- 39.8 m
- True Width
- 30.5 m
- From
- 414.2 m
- To
- 454 m
- Hole Depth
- 501 m
- Intercept Depth
- 378 m
Classification
- Deposit Type
- porphyry
- Program
- resource
- Sample Type
- drill
- Group ID
- K-26-346:414.2-454
- Mining Method
- open_pit
Location
- Location
- Western Zone
- Easting
- 351325
- Northing
- 6156208
- CRS
- UTM Zone 10N NAD83
- EPSG
- 26910
- Elevation
- 1002 m
- Azimuth
- 170 °
- Dip
- -80 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- Activation Laboratories Ltd.
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Metal Equivalent
- Metal Eq. Grade
- 2.53
- Metal Eq. Unit
- % CuEq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-10-21T00:00:00.000Z
Reasoning: The CuEq grade of 2.53% over 39.8m is an exceptional result for a porphyry, demonstrating high-grade mineralization within the broader intercept.
Positive factors
- Bonanza Intercept
- True Width Disclosed
- QA/QC Disclosed
- Infill Drilling
Evidence · table
“2.53”
Context: 39.8
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 30.5
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
K-26-346Kwanika · goldGrade: 1.37Grade Unit: g/tIntercept: 39.8 mView all detailsHide details
Identity
- Hole ID
- K-26-346
- Project
- Kwanika
- Commodity
- gold
- Region
- canada_bc
- Reported Region
- canada_bc
- Ticker
- NWST.V
Geometry
- Grade
- 1.37
- Grade Unit
- g/t
- Intercept
- 39.8 m
- True Width
- 30.5 m
- From
- 414.2 m
- To
- 454 m
- Hole Depth
- 501 m
- Intercept Depth
- 378 m
Classification
- Deposit Type
- porphyry
- Program
- resource
- Sample Type
- drill
- Group ID
- K-26-346:414.2-454
- Mining Method
- open_pit
Location
- Location
- Western Zone
- Easting
- 351325
- Northing
- 6156208
- CRS
- UTM Zone 10N NAD83
- EPSG
- 26910
- Elevation
- 1002 m
- Azimuth
- 170 °
- Dip
- -80 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- Activation Laboratories Ltd.
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Metal Equivalent
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-10-21T00:00:00.000Z
Reasoning: The gold sub-interval of 39.8m at 1.37 g/t is a very strong grade and good width for a porphyry, enhancing resource confidence.
Positive factors
- True Width Disclosed
- QA/QC Disclosed
- Infill Drilling
Evidence · table
“1.37”
Context: 39.8
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 30.5
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
K-26-346Kwanika · silverGrade: 4.32Grade Unit: g/tIntercept: 39.8 mView all detailsHide details
Identity
- Hole ID
- K-26-346
- Project
- Kwanika
- Commodity
- silver
- Region
- canada_bc
- Reported Region
- canada_bc
- Ticker
- NWST.V
Geometry
- Grade
- 4.32
- Grade Unit
- g/t
- Intercept
- 39.8 m
- True Width
- 30.5 m
- From
- 414.2 m
- To
- 454 m
- Hole Depth
- 501 m
- Intercept Depth
- 378 m
Classification
- Deposit Type
- porphyry
- Program
- resource
- Sample Type
- drill
- Group ID
- K-26-346:414.2-454
- Mining Method
- open_pit
Location
- Location
- Western Zone
- Easting
- 351325
- Northing
- 6156208
- CRS
- UTM Zone 10N NAD83
- EPSG
- 26910
- Elevation
- 1002 m
- Azimuth
- 170 °
- Dip
- -80 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- Activation Laboratories Ltd.
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Metal Equivalent
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-10-21T00:00:00.000Z
Reasoning: The silver grade of 4.32 g/t over 39.8m is a moderate byproduct credit for a porphyry system.
Positive factors
- True Width Disclosed
- QA/QC Disclosed
- Infill Drilling
Evidence · table
“4.32”
Context: 39.8
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 30.5
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
K-26-346Kwanika · palladiumGrade: 0.13Grade Unit: g/tIntercept: 39.8 mView all detailsHide details
Identity
- Hole ID
- K-26-346
- Project
- Kwanika
- Commodity
- palladium
- Region
- canada_bc
- Reported Region
- canada_bc
- Ticker
- NWST.V
Geometry
- Grade
- 0.13
- Grade Unit
- g/t
- Intercept
- 39.8 m
- True Width
- 30.5 m
- From
- 414.2 m
- To
- 454 m
- Hole Depth
- 501 m
- Intercept Depth
- 378 m
Classification
- Deposit Type
- porphyry
- Program
- resource
- Sample Type
- drill
- Group ID
- K-26-346:414.2-454
- Mining Method
- open_pit
Location
- Location
- Western Zone
- Easting
- 351325
- Northing
- 6156208
- CRS
- UTM Zone 10N NAD83
- EPSG
- 26910
- Elevation
- 1002 m
- Azimuth
- 170 °
- Dip
- -80 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- Activation Laboratories Ltd.
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Metal Equivalent
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-10-21T00:00:00.000Z
Reasoning: The palladium grade of 0.13 g/t over 39.8m is a low byproduct credit, but noted as palladium enriched.
Positive factors
- True Width Disclosed
- QA/QC Disclosed
- Infill Drilling
Evidence · table
“0.13”
Context: 39.8
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 30.5
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
K-26-346Kwanika · copperIntercept: 20 mView all detailsHide details
Identity
- Hole ID
- K-26-346
- Project
- Kwanika
- Commodity
- copper
- Region
- canada_bc
- Reported Region
- canada_bc
- Ticker
- NWST.V
Geometry
- Intercept
- 20 m
- From
- 458 m
- To
- 478 m
- Hole Depth
- 501 m
- Intercept Depth
- 378 m
Classification
- Deposit Type
- porphyry
- Program
- resource
- Sample Type
- drill
- Group ID
- K-26-346:458-478
- Mining Method
- open_pit
Location
- Location
- Western Zone
- Easting
- 351325
- Northing
- 6156208
- CRS
- UTM Zone 10N NAD83
- EPSG
- 26910
- Elevation
- 1002 m
- Azimuth
- 170 °
- Dip
- -80 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- Activation Laboratories Ltd.
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Metal Equivalent
- Metal Eq. Grade
- 0.87
- Metal Eq. Unit
- % CuEq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-10-21T00:00:00.000Z
Reasoning: The CuEq grade of 0.87% over 20.0m is a good result for a porphyry, contributing to overall continuity.
Positive factors
- True Width Disclosed
- QA/QC Disclosed
- Infill Drilling
Evidence · table
“0.87”
Context: 20.0
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
K-26-346Kwanika · goldGrade: 0.46Grade Unit: g/tIntercept: 20 mView all detailsHide details
Identity
- Hole ID
- K-26-346
- Project
- Kwanika
- Commodity
- gold
- Region
- canada_bc
- Reported Region
- canada_bc
- Ticker
- NWST.V
Geometry
- Grade
- 0.46
- Grade Unit
- g/t
- Intercept
- 20 m
- From
- 458 m
- To
- 478 m
- Hole Depth
- 501 m
- Intercept Depth
- 378 m
Classification
- Deposit Type
- porphyry
- Program
- resource
- Sample Type
- drill
- Group ID
- K-26-346:458-478
- Mining Method
- open_pit
Location
- Location
- Western Zone
- Easting
- 351325
- Northing
- 6156208
- CRS
- UTM Zone 10N NAD83
- EPSG
- 26910
- Elevation
- 1002 m
- Azimuth
- 170 °
- Dip
- -80 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- Activation Laboratories Ltd.
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Metal Equivalent
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-10-21T00:00:00.000Z
Reasoning: The gold sub-interval of 20.0m at 0.46 g/t is a moderate grade and good width for a porphyry, contributing to overall continuity.
Positive factors
- True Width Disclosed
- QA/QC Disclosed
- Infill Drilling
Evidence · table
“0.46”
Context: 20.0
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
K-26-346Kwanika · silverGrade: 2.33Grade Unit: g/tIntercept: 20 mView all detailsHide details
Identity
- Hole ID
- K-26-346
- Project
- Kwanika
- Commodity
- silver
- Region
- canada_bc
- Reported Region
- canada_bc
- Ticker
- NWST.V
Geometry
- Grade
- 2.33
- Grade Unit
- g/t
- Intercept
- 20 m
- From
- 458 m
- To
- 478 m
- Hole Depth
- 501 m
- Intercept Depth
- 378 m
Classification
- Deposit Type
- porphyry
- Program
- resource
- Sample Type
- drill
- Group ID
- K-26-346:458-478
- Mining Method
- open_pit
Location
- Location
- Western Zone
- Easting
- 351325
- Northing
- 6156208
- CRS
- UTM Zone 10N NAD83
- EPSG
- 26910
- Elevation
- 1002 m
- Azimuth
- 170 °
- Dip
- -80 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- Activation Laboratories Ltd.
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Metal Equivalent
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-10-21T00:00:00.000Z
Reasoning: The silver grade of 2.33 g/t over 20.0m is a minor byproduct credit for a porphyry system.
Positive factors
- True Width Disclosed
- QA/QC Disclosed
- Infill Drilling
Evidence · table
“2.33”
Context: 20.0
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
K-26-346Kwanika · palladiumGrade: 0.01Grade Unit: g/tIntercept: 20 mView all detailsHide details
Identity
- Hole ID
- K-26-346
- Project
- Kwanika
- Commodity
- palladium
- Region
- canada_bc
- Reported Region
- canada_bc
- Ticker
- NWST.V
Geometry
- Grade
- 0.01
- Grade Unit
- g/t
- Intercept
- 20 m
- From
- 458 m
- To
- 478 m
- Hole Depth
- 501 m
- Intercept Depth
- 378 m
Classification
- Deposit Type
- porphyry
- Program
- resource
- Sample Type
- drill
- Group ID
- K-26-346:458-478
- Mining Method
- open_pit
Location
- Location
- Western Zone
- Easting
- 351325
- Northing
- 6156208
- CRS
- UTM Zone 10N NAD83
- EPSG
- 26910
- Elevation
- 1002 m
- Azimuth
- 170 °
- Dip
- -80 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- Activation Laboratories Ltd.
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Metal Equivalent
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-10-21T00:00:00.000Z
Reasoning: The palladium grade of 0.01 g/t over 20.0m is a very low byproduct credit.
Positive factors
- True Width Disclosed
- QA/QC Disclosed
- Infill Drilling
Evidence · table
“0.01”
Context: 20.0
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
AndKwanika · copperGrade: 0.24Grade Unit: %Intercept: 40 mView all detailsHide details
Identity
- Hole ID
- And
- Project
- Kwanika
- Commodity
- copper
- Region
- canada_bc
- Reported Region
- canada_bc
- Ticker
- NWST.V
Geometry
- Grade
- 0.24
- Grade Unit
- %
- Intercept
- 40 m
- True Width
- 25.7 m
- From
- 476 m
- To
- 516 m
- Hole Depth
- 576 m
- Intercept Depth
- 476 m
Classification
- Deposit Type
- porphyry
- Sample Type
- drill
- Group ID
- And:476-516
- Mining Method
- open_pit
Location
- CRS
- UTM Zone 10N NAD83
QA/QC
- Laboratory
- Activation Laboratories Ltd.
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Metal Equivalent
- Metal Eq. Grade
- 0.89
- Metal Eq. Unit
- % Cu-Eq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-10-21T00:00:00.000Z
Reasoning: Expanded from assay table. 0.24 % copper is weak against the porphyry deposit band [0.8, 0.4, 0.25, 0.15] %. Grade×width 9.6 %·m is below (grade alone is weak; the better of the two is used).
Negative factors
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.24”
Context: And
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 25.7
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
AndKwanika · goldGrade: 0.59Grade Unit: g/tIntercept: 40 mView all detailsHide details
Identity
- Hole ID
- And
- Project
- Kwanika
- Commodity
- gold
- Region
- canada_bc
- Reported Region
- canada_bc
- Ticker
- NWST.V
Geometry
- Grade
- 0.59
- Grade Unit
- g/t
- Intercept
- 40 m
- True Width
- 25.7 m
- From
- 476 m
- To
- 516 m
- Hole Depth
- 576 m
- Intercept Depth
- 476 m
Classification
- Deposit Type
- porphyry
- Sample Type
- drill
- Group ID
- And:476-516
- Mining Method
- open_pit
Location
- CRS
- UTM Zone 10N NAD83
QA/QC
- Laboratory
- Activation Laboratories Ltd.
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Metal Equivalent
- Metal Eq. Grade
- 0.89
- Metal Eq. Unit
- % Cu-Eq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-10-21T00:00:00.000Z
Reasoning: Expanded from assay table. 0.59 g/t gold is strong against the porphyry deposit band [1, 0.5, 0.3, 0.15] g/t. Grade×width 23.6 g/t·m is weak (grade alone is strong; the better of the two is used).
Positive factors
- 0.59 g/t gold is strong on the porphyry deposit band.
Negative factors
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.59”
Context: And
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 25.7
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
AndKwanika · silverGrade: 1.34Grade Unit: g/tIntercept: 40 mView all detailsHide details
Identity
- Hole ID
- And
- Project
- Kwanika
- Commodity
- silver
- Region
- canada_bc
- Reported Region
- canada_bc
- Ticker
- NWST.V
Geometry
- Grade
- 1.34
- Grade Unit
- g/t
- Intercept
- 40 m
- True Width
- 25.7 m
- From
- 476 m
- To
- 516 m
- Hole Depth
- 576 m
- Intercept Depth
- 476 m
Classification
- Deposit Type
- porphyry
- Sample Type
- drill
- Group ID
- And:476-516
- Mining Method
- open_pit
Location
- CRS
- UTM Zone 10N NAD83
QA/QC
- Laboratory
- Activation Laboratories Ltd.
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Metal Equivalent
- Metal Eq. Grade
- 0.89
- Metal Eq. Unit
- % Cu-Eq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-10-21T00:00:00.000Z
Reasoning: Expanded from assay table. 1.34 g/t silver is below against the default band [500, 200, 100, 30] g/t. Grade×width 53.6 g/t·m is below.
Negative factors
- 1.34 g/t silver is below the weak threshold (30 g/t) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“1.34”
Context: And
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 25.7
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
AndKwanika · palladiumGrade: 0.05Grade Unit: g/tIntercept: 40 mView all detailsHide details
Identity
- Hole ID
- And
- Project
- Kwanika
- Commodity
- palladium
- Region
- canada_bc
- Reported Region
- canada_bc
- Ticker
- NWST.V
Geometry
- Grade
- 0.05
- Grade Unit
- g/t
- Intercept
- 40 m
- True Width
- 25.7 m
- From
- 476 m
- To
- 516 m
- Hole Depth
- 576 m
- Intercept Depth
- 476 m
Classification
- Deposit Type
- porphyry
- Sample Type
- drill
- Group ID
- And:476-516
- Mining Method
- open_pit
Location
- CRS
- UTM Zone 10N NAD83
QA/QC
- Laboratory
- Activation Laboratories Ltd.
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Metal Equivalent
- Metal Eq. Grade
- 0.89
- Metal Eq. Unit
- % Cu-Eq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-10-21T00:00:00.000Z
Reasoning: Expanded from assay table: 0.05 g/t palladium. No grade band defined for this commodity, so the score is a placeholder.
Negative factors
- No grade rubric for palladium; intercept not scored.
Evidence · table
“0.05”
Context: And
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 25.7
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
AndKwanika · copperGrade: 1.08Grade Unit: %Intercept: 16.1 mView all detailsHide details
Identity
- Hole ID
- And
- Project
- Kwanika
- Commodity
- copper
- Region
- canada_bc
- Reported Region
- canada_bc
- Ticker
- NWST.V
Geometry
- Grade
- 1.08
- Grade Unit
- %
- Intercept
- 16.1 m
- True Width
- 12.3 m
- From
- 392.5 m
- To
- 408.6 m
- Hole Depth
- 576 m
- Intercept Depth
- 392.5 m
Classification
- Deposit Type
- porphyry
- Sample Type
- drill
- Group ID
- And:392.5-408.6
- Mining Method
- open_pit
Location
- CRS
- UTM Zone 10N NAD83
QA/QC
- Laboratory
- Activation Laboratories Ltd.
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Metal Equivalent
- Metal Eq. Grade
- 4.37
- Metal Eq. Unit
- % Cu-Eq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-10-21T00:00:00.000Z
Reasoning: Expanded from assay table. 1.08 % copper is exceptional against the porphyry deposit band [0.8, 0.4, 0.25, 0.15] %. Grade×width 17.4 %·m is below (grade alone is exceptional; the better of the two is used).
Positive factors
- 1.08 % copper is exceptional on the porphyry deposit band.
Negative factors
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“1.08”
Context: And
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 12.3
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
AndKwanika · goldGrade: 3.03Grade Unit: g/tIntercept: 16.1 mView all detailsHide details
Identity
- Hole ID
- And
- Project
- Kwanika
- Commodity
- gold
- Region
- canada_bc
- Reported Region
- canada_bc
- Ticker
- NWST.V
Geometry
- Grade
- 3.03
- Grade Unit
- g/t
- Intercept
- 16.1 m
- True Width
- 12.3 m
- From
- 392.5 m
- To
- 408.6 m
- Hole Depth
- 576 m
- Intercept Depth
- 392.5 m
Classification
- Deposit Type
- porphyry
- Sample Type
- drill
- Group ID
- And:392.5-408.6
- Mining Method
- open_pit
Location
- CRS
- UTM Zone 10N NAD83
QA/QC
- Laboratory
- Activation Laboratories Ltd.
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Metal Equivalent
- Metal Eq. Grade
- 4.37
- Metal Eq. Unit
- % Cu-Eq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-10-21T00:00:00.000Z
Reasoning: Expanded from assay table. 3.03 g/t gold is exceptional against the porphyry deposit band [1, 0.5, 0.3, 0.15] g/t. Grade×width 48.8 g/t·m is moderate (grade alone is exceptional; the better of the two is used).
Positive factors
- 3.03 g/t gold is exceptional on the porphyry deposit band.
Negative factors
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“3.03”
Context: And
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 12.3
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
AndKwanika · silverGrade: 4.23Grade Unit: g/tIntercept: 16.1 mView all detailsHide details
Identity
- Hole ID
- And
- Project
- Kwanika
- Commodity
- silver
- Region
- canada_bc
- Reported Region
- canada_bc
- Ticker
- NWST.V
Geometry
- Grade
- 4.23
- Grade Unit
- g/t
- Intercept
- 16.1 m
- True Width
- 12.3 m
- From
- 392.5 m
- To
- 408.6 m
- Hole Depth
- 576 m
- Intercept Depth
- 392.5 m
Classification
- Deposit Type
- porphyry
- Sample Type
- drill
- Group ID
- And:392.5-408.6
- Mining Method
- open_pit
Location
- CRS
- UTM Zone 10N NAD83
QA/QC
- Laboratory
- Activation Laboratories Ltd.
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Metal Equivalent
- Metal Eq. Grade
- 4.37
- Metal Eq. Unit
- % Cu-Eq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-10-21T00:00:00.000Z
Reasoning: Expanded from assay table. 4.23 g/t silver is below against the default band [500, 200, 100, 30] g/t. Grade×width 68.1 g/t·m is below.
Negative factors
- 4.23 g/t silver is below the weak threshold (30 g/t) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“4.23”
Context: And
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 12.3
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
AndKwanika · palladiumGrade: 0.05Grade Unit: g/tIntercept: 16.1 mView all detailsHide details
Identity
- Hole ID
- And
- Project
- Kwanika
- Commodity
- palladium
- Region
- canada_bc
- Reported Region
- canada_bc
- Ticker
- NWST.V
Geometry
- Grade
- 0.05
- Grade Unit
- g/t
- Intercept
- 16.1 m
- True Width
- 12.3 m
- From
- 392.5 m
- To
- 408.6 m
- Hole Depth
- 576 m
- Intercept Depth
- 392.5 m
Classification
- Deposit Type
- porphyry
- Sample Type
- drill
- Group ID
- And:392.5-408.6
- Mining Method
- open_pit
Location
- CRS
- UTM Zone 10N NAD83
QA/QC
- Laboratory
- Activation Laboratories Ltd.
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Metal Equivalent
- Metal Eq. Grade
- 4.37
- Metal Eq. Unit
- % Cu-Eq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-10-21T00:00:00.000Z
Reasoning: Expanded from assay table: 0.05 g/t palladium. No grade band defined for this commodity, so the score is a placeholder.
Negative factors
- No grade rubric for palladium; intercept not scored.
Evidence · table
“0.05”
Context: And
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 12.3
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
AndKwanika · copperGrade: 1.01Grade Unit: %Intercept: 39.8 mView all detailsHide details
Identity
- Hole ID
- And
- Project
- Kwanika
- Commodity
- copper
- Region
- canada_bc
- Reported Region
- canada_bc
- Ticker
- NWST.V
Geometry
- Grade
- 1.01
- Grade Unit
- %
- Intercept
- 39.8 m
- True Width
- 30.5 m
- From
- 414.2 m
- To
- 454 m
- Hole Depth
- 576 m
- Intercept Depth
- 414.2 m
Classification
- Deposit Type
- porphyry
- Sample Type
- drill
- Group ID
- And:414.2-454
- Mining Method
- open_pit
Location
- CRS
- UTM Zone 10N NAD83
QA/QC
- Laboratory
- Activation Laboratories Ltd.
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Metal Equivalent
- Metal Eq. Grade
- 2.53
- Metal Eq. Unit
- % Cu-Eq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-10-21T00:00:00.000Z
Reasoning: Expanded from assay table. 1.01 % copper is exceptional against the porphyry deposit band [0.8, 0.4, 0.25, 0.15] %. Grade×width 40.2 %·m is weak (grade alone is exceptional; the better of the two is used).
Positive factors
- 1.01 % copper is exceptional on the porphyry deposit band.
Negative factors
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“1.01”
Context: And
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 30.5
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
AndKwanika · goldGrade: 1.37Grade Unit: g/tIntercept: 39.8 mView all detailsHide details
Identity
- Hole ID
- And
- Project
- Kwanika
- Commodity
- gold
- Region
- canada_bc
- Reported Region
- canada_bc
- Ticker
- NWST.V
Geometry
- Grade
- 1.37
- Grade Unit
- g/t
- Intercept
- 39.8 m
- True Width
- 30.5 m
- From
- 414.2 m
- To
- 454 m
- Hole Depth
- 576 m
- Intercept Depth
- 414.2 m
Classification
- Deposit Type
- porphyry
- Sample Type
- drill
- Group ID
- And:414.2-454
- Mining Method
- open_pit
Location
- CRS
- UTM Zone 10N NAD83
QA/QC
- Laboratory
- Activation Laboratories Ltd.
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Metal Equivalent
- Metal Eq. Grade
- 2.53
- Metal Eq. Unit
- % Cu-Eq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-10-21T00:00:00.000Z
Reasoning: Expanded from assay table. 1.37 g/t gold is exceptional against the porphyry deposit band [1, 0.5, 0.3, 0.15] g/t. Grade×width 54.5 g/t·m is moderate (grade alone is exceptional; the better of the two is used).
Positive factors
- 1.37 g/t gold is exceptional on the porphyry deposit band.
Negative factors
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“1.37”
Context: And
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 30.5
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
AndKwanika · silverGrade: 4.32Grade Unit: g/tIntercept: 39.8 mView all detailsHide details
Identity
- Hole ID
- And
- Project
- Kwanika
- Commodity
- silver
- Region
- canada_bc
- Reported Region
- canada_bc
- Ticker
- NWST.V
Geometry
- Grade
- 4.32
- Grade Unit
- g/t
- Intercept
- 39.8 m
- True Width
- 30.5 m
- From
- 414.2 m
- To
- 454 m
- Hole Depth
- 576 m
- Intercept Depth
- 414.2 m
Classification
- Deposit Type
- porphyry
- Sample Type
- drill
- Group ID
- And:414.2-454
- Mining Method
- open_pit
Location
- CRS
- UTM Zone 10N NAD83
QA/QC
- Laboratory
- Activation Laboratories Ltd.
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Metal Equivalent
- Metal Eq. Grade
- 2.53
- Metal Eq. Unit
- % Cu-Eq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-10-21T00:00:00.000Z
Reasoning: Expanded from assay table. 4.32 g/t silver is below against the default band [500, 200, 100, 30] g/t. Grade×width 171.9 g/t·m is below.
Negative factors
- 4.32 g/t silver is below the weak threshold (30 g/t) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“4.32”
Context: And
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 30.5
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
AndKwanika · palladiumGrade: 0.13Grade Unit: g/tIntercept: 39.8 mView all detailsHide details
Identity
- Hole ID
- And
- Project
- Kwanika
- Commodity
- palladium
- Region
- canada_bc
- Reported Region
- canada_bc
- Ticker
- NWST.V
Geometry
- Grade
- 0.13
- Grade Unit
- g/t
- Intercept
- 39.8 m
- True Width
- 30.5 m
- From
- 414.2 m
- To
- 454 m
- Hole Depth
- 576 m
- Intercept Depth
- 414.2 m
Classification
- Deposit Type
- porphyry
- Sample Type
- drill
- Group ID
- And:414.2-454
- Mining Method
- open_pit
Location
- CRS
- UTM Zone 10N NAD83
QA/QC
- Laboratory
- Activation Laboratories Ltd.
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Metal Equivalent
- Metal Eq. Grade
- 2.53
- Metal Eq. Unit
- % Cu-Eq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-10-21T00:00:00.000Z
Reasoning: Expanded from assay table: 0.13 g/t palladium. No grade band defined for this commodity, so the score is a placeholder.
Negative factors
- No grade rubric for palladium; intercept not scored.
Evidence · table
“0.13”
Context: And
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 30.5
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
AndKwanika · copperGrade: 0.34Grade Unit: %Intercept: 20 mView all detailsHide details
Identity
- Hole ID
- And
- Project
- Kwanika
- Commodity
- copper
- Region
- canada_bc
- Reported Region
- canada_bc
- Ticker
- NWST.V
Geometry
- Grade
- 0.34
- Grade Unit
- %
- Intercept
- 20 m
- True Width
- 15.3 m
- From
- 458 m
- To
- 478 m
- Hole Depth
- 576 m
- Intercept Depth
- 458 m
Classification
- Deposit Type
- porphyry
- Sample Type
- drill
- Group ID
- And:458-478
- Mining Method
- open_pit
Location
- CRS
- UTM Zone 10N NAD83
QA/QC
- Laboratory
- Activation Laboratories Ltd.
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Metal Equivalent
- Metal Eq. Grade
- 0.87
- Metal Eq. Unit
- % Cu-Eq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-10-21T00:00:00.000Z
Reasoning: Expanded from assay table. 0.34 % copper is moderate against the porphyry deposit band [0.8, 0.4, 0.25, 0.15] %. Grade×width 6.8 %·m is below (grade alone is moderate; the better of the two is used).
Negative factors
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.34”
Context: And
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 15.3
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
AndKwanika · goldGrade: 0.46Grade Unit: g/tIntercept: 20 mView all detailsHide details
Identity
- Hole ID
- And
- Project
- Kwanika
- Commodity
- gold
- Region
- canada_bc
- Reported Region
- canada_bc
- Ticker
- NWST.V
Geometry
- Grade
- 0.46
- Grade Unit
- g/t
- Intercept
- 20 m
- True Width
- 15.3 m
- From
- 458 m
- To
- 478 m
- Hole Depth
- 576 m
- Intercept Depth
- 458 m
Classification
- Deposit Type
- porphyry
- Sample Type
- drill
- Group ID
- And:458-478
- Mining Method
- open_pit
Location
- CRS
- UTM Zone 10N NAD83
QA/QC
- Laboratory
- Activation Laboratories Ltd.
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Metal Equivalent
- Metal Eq. Grade
- 0.87
- Metal Eq. Unit
- % Cu-Eq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-10-21T00:00:00.000Z
Reasoning: Expanded from assay table. 0.46 g/t gold is moderate against the porphyry deposit band [1, 0.5, 0.3, 0.15] g/t. Grade×width 9.2 g/t·m is below (grade alone is moderate; the better of the two is used).
Negative factors
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.46”
Context: And
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 15.3
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
AndKwanika · silverGrade: 2.33Grade Unit: g/tIntercept: 20 mView all detailsHide details
Identity
- Hole ID
- And
- Project
- Kwanika
- Commodity
- silver
- Region
- canada_bc
- Reported Region
- canada_bc
- Ticker
- NWST.V
Geometry
- Grade
- 2.33
- Grade Unit
- g/t
- Intercept
- 20 m
- True Width
- 15.3 m
- From
- 458 m
- To
- 478 m
- Hole Depth
- 576 m
- Intercept Depth
- 458 m
Classification
- Deposit Type
- porphyry
- Sample Type
- drill
- Group ID
- And:458-478
- Mining Method
- open_pit
Location
- CRS
- UTM Zone 10N NAD83
QA/QC
- Laboratory
- Activation Laboratories Ltd.
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Metal Equivalent
- Metal Eq. Grade
- 0.87
- Metal Eq. Unit
- % Cu-Eq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-10-21T00:00:00.000Z
Reasoning: Expanded from assay table. 2.33 g/t silver is below against the default band [500, 200, 100, 30] g/t. Grade×width 46.6 g/t·m is below.
Negative factors
- 2.33 g/t silver is below the weak threshold (30 g/t) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“2.33”
Context: And
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 15.3
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
AndKwanika · palladiumGrade: 0.01Grade Unit: g/tIntercept: 20 mView all detailsHide details
Identity
- Hole ID
- And
- Project
- Kwanika
- Commodity
- palladium
- Region
- canada_bc
- Reported Region
- canada_bc
- Ticker
- NWST.V
Geometry
- Grade
- 0.01
- Grade Unit
- g/t
- Intercept
- 20 m
- True Width
- 15.3 m
- From
- 458 m
- To
- 478 m
- Hole Depth
- 576 m
- Intercept Depth
- 458 m
Classification
- Deposit Type
- porphyry
- Sample Type
- drill
- Group ID
- And:458-478
- Mining Method
- open_pit
Location
- CRS
- UTM Zone 10N NAD83
QA/QC
- Laboratory
- Activation Laboratories Ltd.
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Metal Equivalent
- Metal Eq. Grade
- 0.87
- Metal Eq. Unit
- % Cu-Eq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-10-21T00:00:00.000Z
Reasoning: Expanded from assay table: 0.01 g/t palladium. No grade band defined for this commodity, so the score is a placeholder.
Negative factors
- No grade rubric for palladium; intercept not scored.
Evidence · table
“0.01”
Context: And
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 15.3
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
How Atlas produces this analysis
Minestarters Atlas uses automated extraction to summarize mining announcements, identify reported measurements, and classify supporting evidence. Sentiment reflects the extracted narrative and classification rules; it is an interpretation, not a reported measurement. Evidence quotes and context are provided where available. Missing data, low-confidence results, and review flags indicate limitations. Check the original publisher announcement before relying on an interpretation.