Nine Mile Metals DDH Wd-26-14 Intersects 5.09% Cu-Eq Over 14.15m Including 6.35% Cu-Eq Over 9m and 7.45% Cu-Eq Over 6m
Original announcement by orestocks on
- Company
- Nine Mile Metals Ltd.
- Ticker
- NINE.CN
- Exchange
- Unavailable
- Region
- New Brunswick
- Primary commodity
- Copper
- Secondary commodities
- Lead, Zinc, Silver, Gold
- Document categories
- Drill results
- Extracted
- 2026-09-24 13:15:20 UTC
Analysis by Minestarters Atlas
Atlas analysis published:
Minestarters Atlas analysis
Summary
Nine Mile Metals announced high-grade polymetallic drill results from hole DDH WD-26-14 at its Wedge Mine in New Brunswick, intersecting 5.09% Cu-Eq over 14.15m true width, including higher-grade sub-intervals. The VMS mineralization shows increasing grades with depth, and the company plans further drilling guided by BHEM surveys to characterize the depth and lateral extent of the lenses.
Reasoning: DDH WD-26-14 returned a high-grade, wide, polymetallic VMS intercept with true width stated, and grades increasing with depth, indicating strong potential for resource expansion. The drilling is extending mineralization at the edge of the drill pattern.
Positive factors
- High Cu-Eq grade
- Significant intercept length
- True width disclosed
- Grades strengthen with depth
- Polymetallic VMS mineralization
- QA/QC disclosed
- QP signed
- Step-out drilling extending mineralization
Negative factors
- Metal equivalent calculation assumes uniform 95% metallurgical recovery for all metals, which may not be realistic without specific testwork
Low confidence — this extraction should be reviewed alongside the original source.
Facts used in scoring: 190
Classification and evidence
Bonanza Interceptpositive
Exceptionally high-grade zone, well above the deposit-type norm.
Why it applies: The main intercept of 5.09% Cu-Eq over 14.15m, and sub-intervals up to 7.45% Cu-Eq over 6m, are exceptionally high-grade for a VMS deposit.
Evidence · text
“DDH WD-26-14 intersected 5.09% Cu-Eq over 14.15 m(107.35 - 121.50 m, true width), including 6.35% Cu-Eq over 9.00 m and 7.45% Cu-Eq over 6.00 m.”
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: The document explicitly states that the reported intersections are of true width.
Evidence · text
“The intersections reported are of true width.”
Step-Out Extensionpositive
Mineralization extended beyond the previously known limit.
Why it applies: The drill hole was collared at the edge of the drill pattern in the southwest, and the company plans further drilling to target the depth and lateral extent of the lenses, indicating an effort to extend mineralization.
Evidence · text
“DDH WD-26-14 was collared in the southwest, at the edge of our drill pattern”
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: The release details the independent laboratory (ALS Global), assay methods, and the company's QA/QC program including CRM standards, duplicates, and blanks, with sign-off by a Qualified Person.
Evidence · text
“All samples were submitted to ALS Global in Moncton, an independent commercial laboratory, for preparation and assaying (ME-ICP61a four-acid digestion with ICP-AES; Au by fire assay Au-AA23 with AA finish; overlimit Au by gravimetric analysis and overlimit base metals by OG62). ALS runs its own QA/QC protocols including coarse and pulp duplicates. Nine Mile's QAQC program includes regular insertion of CRM standards, duplicates, and blanks with a stringent review of all results; QAQC and data validation were performed and no material errors were observed. Technical information in this news release has been prepared in accordance with NI 43-101 and reviewed and approved by Gary Lohman, B.Sc., P.Geo., VP Exploration and Director, the Company's Qualified Person, who is not independent of the Company.”
Extracted facts
Stored fact records: 190. Some facts used in scoring do not have a stored record.
Drill Results (190)
WD-26-14Wedge · copperGrade: 5.09Grade Unit: %Intercept: 14.15 mView all detailsHide details
Identity
- Hole ID
- WD-26-14
- Project
- Wedge
- Commodity
- copper
- Region
- canada_nb
- Reported Region
- canada_nb
- Ticker
- NINE.CN
Geometry
- Grade
- 5.09
- Grade Unit
- %
- Intercept
- 14.15 m
- True Width
- 14.15 m
- From
- 107.35 m
- To
- 121.5 m
- Hole Depth
- 158 m
- Intercept Depth
- 107.35 m
Classification
- Deposit Type
- vms
- Program
- exploration
- Sample Type
- drill
- Group ID
- WD-26-14:107.35-121.5
- Mining Method
- underground
Location
- Location
- southwest
- Azimuth
- 295 °
- Dip
- -65 °
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Global
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Metal Eq. Grade
- 5.09
- Metal Eq. Unit
- % Cu-Eq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-24T00:00:00.000Z
Reasoning: This is a high-grade, wide polymetallic VMS intercept with true width stated, indicating strong potential for resource expansion.
Positive factors
- High Cu-Eq grade
- Significant intercept length
- True width disclosed
- Polymetallic VMS mineralization
- QA/QC disclosed
- QP signed
Negative factors
- Metal equivalent calculation assumes uniform 95% metallurgical recovery for all metals, which may not be realistic without specific testwork
Evidence · text
“DDH WD-26-14 intersected 5.09% Cu-Eq over 14.15 m(107.35 - 121.50 m, true width)”
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 14.15
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
WD-26-14Wedge · copperGrade: 6.35Grade Unit: %Intercept: 9 mView all detailsHide details
Identity
- Hole ID
- WD-26-14
- Project
- Wedge
- Commodity
- copper
- Region
- canada_nb
- Reported Region
- canada_nb
- Ticker
- NINE.CN
Geometry
- Grade
- 6.35
- Grade Unit
- %
- Intercept
- 9 m
- True Width
- 9 m
- From
- 112.5 m
- To
- 121.5 m
- Hole Depth
- 158 m
- Intercept Depth
- 107.35 m
Classification
- Deposit Type
- vms
- Program
- exploration
- Sample Type
- drill
- Group ID
- WD-26-14:112.5-121.5
- Mining Method
- underground
Location
- Location
- southwest
- Azimuth
- 295 °
- Dip
- -65 °
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Global
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Metal Eq. Grade
- 6.35
- Metal Eq. Unit
- % Cu-Eq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-24T00:00:00.000Z
Reasoning: This sub-interval shows even higher grades over a significant true width, enhancing the overall prospectivity of the intercept.
Positive factors
- Very high Cu-Eq grade
- Significant intercept length
- True width disclosed
- Polymetallic VMS mineralization
- QA/QC disclosed
- QP signed
Negative factors
- Metal equivalent calculation assumes uniform 95% metallurgical recovery for all metals, which may not be realistic without specific testwork
Evidence · text
“including 6.35% Cu-Eq over 9.00 m”
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 9
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
WD-26-14Wedge · copperGrade: 0.01Grade Unit: %Intercept: 1.3 mView all detailsHide details
Identity
- Hole ID
- WD-26-14
- Project
- Wedge
- Commodity
- copper
- Region
- canada_nb
- Reported Region
- canada_nb
- Ticker
- NINE.CN
Geometry
- Grade
- 0.01
- Grade Unit
- %
- Intercept
- 1.3 m
- From
- 105 m
- To
- 106.3 m
- Hole Depth
- 158 m
- Intercept Depth
- 107.35 m
Classification
- Deposit Type
- vms
- Program
- exploration
- Sample Type
- drill
- Group ID
- WD-26-14:105-106.3
- Mining Method
- underground
Location
- Location
- southwest
- Azimuth
- 295 °
- Dip
- -65 °
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Global
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Metal Eq. Grade
- 0.03
- Metal Eq. Unit
- % Cu-Eq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-24T00:00:00.000Z
Reasoning: This interval shows very low Cu-Eq grade, indicating it is outside the main mineralized zone.
Negative factors
- Low grade
Evidence · table
“0.03%”
Context: 1.30
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
WD-26-14Wedge · copperGrade: 0.07Grade Unit: %Intercept: 1.05 mView all detailsHide details
Identity
- Hole ID
- WD-26-14
- Project
- Wedge
- Commodity
- copper
- Region
- canada_nb
- Reported Region
- canada_nb
- Ticker
- NINE.CN
Geometry
- Grade
- 0.07
- Grade Unit
- %
- Intercept
- 1.05 m
- From
- 106.3 m
- To
- 107.35 m
- Hole Depth
- 158 m
- Intercept Depth
- 107.35 m
Classification
- Deposit Type
- vms
- Program
- exploration
- Sample Type
- drill
- Group ID
- WD-26-14:106.3-107.35
- Mining Method
- underground
Location
- Location
- southwest
- Azimuth
- 295 °
- Dip
- -65 °
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Global
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Metal Eq. Grade
- 0.17
- Metal Eq. Unit
- % Cu-Eq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-24T00:00:00.000Z
Reasoning: This interval shows very low Cu-Eq grade, indicating it is outside the main mineralized zone.
Negative factors
- Low grade
Evidence · table
“0.17%”
Context: 1.05
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
WD-26-14Wedge · copperGrade: 0.87Grade Unit: %Intercept: 1.05 mView all detailsHide details
Identity
- Hole ID
- WD-26-14
- Project
- Wedge
- Commodity
- copper
- Region
- canada_nb
- Reported Region
- canada_nb
- Ticker
- NINE.CN
Geometry
- Grade
- 0.87
- Grade Unit
- %
- Intercept
- 1.05 m
- From
- 107.35 m
- To
- 108.4 m
- Hole Depth
- 158 m
- Intercept Depth
- 107.35 m
Classification
- Deposit Type
- vms
- Program
- exploration
- Sample Type
- drill
- Group ID
- WD-26-14:107.35-108.4
- Mining Method
- underground
Location
- Location
- southwest
- Azimuth
- 295 °
- Dip
- -65 °
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Global
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Metal Eq. Grade
- 1.72
- Metal Eq. Unit
- % Cu-Eq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-24T00:00:00.000Z
Reasoning: This interval shows a moderate Cu-Eq grade, marking the beginning of the significant mineralization.
Negative factors
- Moderate grade for VMS
Evidence · table
“1.72%”
Context: 1.05
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
WD-26-14Wedge · copperGrade: 1.29Grade Unit: %Intercept: 1.1 mView all detailsHide details
Identity
- Hole ID
- WD-26-14
- Project
- Wedge
- Commodity
- copper
- Region
- canada_nb
- Reported Region
- canada_nb
- Ticker
- NINE.CN
Geometry
- Grade
- 1.29
- Grade Unit
- %
- Intercept
- 1.1 m
- From
- 108.4 m
- To
- 109.5 m
- Hole Depth
- 158 m
- Intercept Depth
- 107.35 m
Classification
- Deposit Type
- vms
- Program
- exploration
- Sample Type
- drill
- Group ID
- WD-26-14:108.4-109.5
- Mining Method
- underground
Location
- Location
- southwest
- Azimuth
- 295 °
- Dip
- -65 °
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Global
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Metal Eq. Grade
- 2.46
- Metal Eq. Unit
- % Cu-Eq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-24T00:00:00.000Z
Reasoning: This interval shows a moderate Cu-Eq grade, contributing to the overall mineralized zone.
Negative factors
- Moderate grade for VMS
Evidence · table
“2.46%”
Context: 1.10
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
WD-26-14Wedge · copperGrade: 1.07Grade Unit: %Intercept: 1 mView all detailsHide details
Identity
- Hole ID
- WD-26-14
- Project
- Wedge
- Commodity
- copper
- Region
- canada_nb
- Reported Region
- canada_nb
- Ticker
- NINE.CN
Geometry
- Grade
- 1.07
- Grade Unit
- %
- Intercept
- 1 m
- From
- 109.5 m
- To
- 110.5 m
- Hole Depth
- 158 m
- Intercept Depth
- 107.35 m
Classification
- Deposit Type
- vms
- Program
- exploration
- Sample Type
- drill
- Group ID
- WD-26-14:109.5-110.5
- Mining Method
- underground
Location
- Location
- southwest
- Azimuth
- 295 °
- Dip
- -65 °
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Global
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Metal Eq. Grade
- 2.33
- Metal Eq. Unit
- % Cu-Eq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-24T00:00:00.000Z
Reasoning: This interval shows a moderate Cu-Eq grade, contributing to the overall mineralized zone.
Negative factors
- Moderate grade for VMS
Evidence · table
“2.33%”
Context: 1.00
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
WD-26-14Wedge · copperGrade: 1.33Grade Unit: %Intercept: 1 mView all detailsHide details
Identity
- Hole ID
- WD-26-14
- Project
- Wedge
- Commodity
- copper
- Region
- canada_nb
- Reported Region
- canada_nb
- Ticker
- NINE.CN
Geometry
- Grade
- 1.33
- Grade Unit
- %
- Intercept
- 1 m
- From
- 110.5 m
- To
- 111.5 m
- Hole Depth
- 158 m
- Intercept Depth
- 107.35 m
Classification
- Deposit Type
- vms
- Program
- exploration
- Sample Type
- drill
- Group ID
- WD-26-14:110.5-111.5
- Mining Method
- underground
Location
- Location
- southwest
- Azimuth
- 295 °
- Dip
- -65 °
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Global
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Metal Eq. Grade
- 4.4
- Metal Eq. Unit
- % Cu-Eq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-24T00:00:00.000Z
Reasoning: This interval shows a strong Cu-Eq grade, indicating significant mineralization.
Positive factors
- Strong Cu-Eq grade
Evidence · table
“4.40%”
Context: 1.00
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
WD-26-14Wedge · copperGrade: 1.64Grade Unit: %Intercept: 1 mView all detailsHide details
Identity
- Hole ID
- WD-26-14
- Project
- Wedge
- Commodity
- copper
- Region
- canada_nb
- Reported Region
- canada_nb
- Ticker
- NINE.CN
Geometry
- Grade
- 1.64
- Grade Unit
- %
- Intercept
- 1 m
- From
- 111.5 m
- To
- 112.5 m
- Hole Depth
- 158 m
- Intercept Depth
- 107.35 m
Classification
- Deposit Type
- vms
- Program
- exploration
- Sample Type
- drill
- Group ID
- WD-26-14:111.5-112.5
- Mining Method
- underground
Location
- Location
- southwest
- Azimuth
- 295 °
- Dip
- -65 °
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Global
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Metal Eq. Grade
- 3.59
- Metal Eq. Unit
- % Cu-Eq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-24T00:00:00.000Z
Reasoning: This interval shows a strong Cu-Eq grade, contributing to the overall mineralized zone.
Positive factors
- Strong Cu-Eq grade
Evidence · table
“3.59%”
Context: 1.00
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
WD-26-14Wedge · copperGrade: 0.81Grade Unit: %Intercept: 1 mView all detailsHide details
Identity
- Hole ID
- WD-26-14
- Project
- Wedge
- Commodity
- copper
- Region
- canada_nb
- Reported Region
- canada_nb
- Ticker
- NINE.CN
Geometry
- Grade
- 0.81
- Grade Unit
- %
- Intercept
- 1 m
- From
- 112.5 m
- To
- 113.5 m
- Hole Depth
- 158 m
- Intercept Depth
- 107.35 m
Classification
- Deposit Type
- vms
- Program
- exploration
- Sample Type
- drill
- Group ID
- WD-26-14:112.5-113.5
- Mining Method
- underground
Location
- Location
- southwest
- Azimuth
- 295 °
- Dip
- -65 °
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Global
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Metal Eq. Grade
- 5.19
- Metal Eq. Unit
- % Cu-Eq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-24T00:00:00.000Z
Reasoning: This interval shows an exceptional Cu-Eq grade, contributing significantly to the overall mineralized zone.
Positive factors
- Exceptional Cu-Eq grade
Evidence · table
“5.19%”
Context: 1.00
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
WD-26-14Wedge · copperGrade: 1.11Grade Unit: %Intercept: 1 mView all detailsHide details
Identity
- Hole ID
- WD-26-14
- Project
- Wedge
- Commodity
- copper
- Region
- canada_nb
- Reported Region
- canada_nb
- Ticker
- NINE.CN
Geometry
- Grade
- 1.11
- Grade Unit
- %
- Intercept
- 1 m
- From
- 113.5 m
- To
- 114.5 m
- Hole Depth
- 158 m
- Intercept Depth
- 107.35 m
Classification
- Deposit Type
- vms
- Program
- exploration
- Sample Type
- drill
- Group ID
- WD-26-14:113.5-114.5
- Mining Method
- underground
Location
- Location
- southwest
- Azimuth
- 295 °
- Dip
- -65 °
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Global
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Metal Eq. Grade
- 3.41
- Metal Eq. Unit
- % Cu-Eq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-24T00:00:00.000Z
Reasoning: This interval shows a strong Cu-Eq grade, contributing to the overall mineralized zone.
Positive factors
- Strong Cu-Eq grade
Evidence · table
“3.41%”
Context: 1.00
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
WD-26-14Wedge · copperGrade: 1.33Grade Unit: %Intercept: 1 mView all detailsHide details
Identity
- Hole ID
- WD-26-14
- Project
- Wedge
- Commodity
- copper
- Region
- canada_nb
- Reported Region
- canada_nb
- Ticker
- NINE.CN
Geometry
- Grade
- 1.33
- Grade Unit
- %
- Intercept
- 1 m
- From
- 114.5 m
- To
- 115.5 m
- Hole Depth
- 158 m
- Intercept Depth
- 107.35 m
Classification
- Deposit Type
- vms
- Program
- exploration
- Sample Type
- drill
- Group ID
- WD-26-14:114.5-115.5
- Mining Method
- underground
Location
- Location
- southwest
- Azimuth
- 295 °
- Dip
- -65 °
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Global
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Metal Eq. Grade
- 3.88
- Metal Eq. Unit
- % Cu-Eq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-24T00:00:00.000Z
Reasoning: This interval shows a strong Cu-Eq grade, contributing to the overall mineralized zone.
Positive factors
- Strong Cu-Eq grade
Evidence · table
“3.88%”
Context: 1.00
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
WD-26-14Wedge · copperGrade: 2.21Grade Unit: %Intercept: 1 mView all detailsHide details
Identity
- Hole ID
- WD-26-14
- Project
- Wedge
- Commodity
- copper
- Region
- canada_nb
- Reported Region
- canada_nb
- Ticker
- NINE.CN
Geometry
- Grade
- 2.21
- Grade Unit
- %
- Intercept
- 1 m
- From
- 115.5 m
- To
- 116.5 m
- Hole Depth
- 158 m
- Intercept Depth
- 107.35 m
Classification
- Deposit Type
- vms
- Program
- exploration
- Sample Type
- drill
- Group ID
- WD-26-14:115.5-116.5
- Mining Method
- underground
Location
- Location
- southwest
- Azimuth
- 295 °
- Dip
- -65 °
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Global
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Metal Eq. Grade
- 6.26
- Metal Eq. Unit
- % Cu-Eq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-24T00:00:00.000Z
Reasoning: This interval shows an exceptional Cu-Eq grade, contributing significantly to the overall mineralized zone and strengthening with depth.
Positive factors
- Exceptional Cu-Eq grade
Evidence · table
“6.26%”
Context: 1.00
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
WD-26-14Wedge · copperGrade: 3.01Grade Unit: %Intercept: 1 mView all detailsHide details
Identity
- Hole ID
- WD-26-14
- Project
- Wedge
- Commodity
- copper
- Region
- canada_nb
- Reported Region
- canada_nb
- Ticker
- NINE.CN
Geometry
- Grade
- 3.01
- Grade Unit
- %
- Intercept
- 1 m
- From
- 116.5 m
- To
- 117.5 m
- Hole Depth
- 158 m
- Intercept Depth
- 107.35 m
Classification
- Deposit Type
- vms
- Program
- exploration
- Sample Type
- drill
- Group ID
- WD-26-14:116.5-117.5
- Mining Method
- underground
Location
- Location
- southwest
- Azimuth
- 295 °
- Dip
- -65 °
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Global
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Metal Eq. Grade
- 7.29
- Metal Eq. Unit
- % Cu-Eq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-24T00:00:00.000Z
Reasoning: This interval shows exceptional Cu-Eq grade, continuing the trend of strengthening mineralization with depth.
Positive factors
- Exceptional Cu-Eq grade
- Grades strengthen with depth
Evidence · table
“7.29%”
Context: 1.00
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
WD-26-14Wedge · copperGrade: 2.61Grade Unit: %Intercept: 1 mView all detailsHide details
Identity
- Hole ID
- WD-26-14
- Project
- Wedge
- Commodity
- copper
- Region
- canada_nb
- Reported Region
- canada_nb
- Ticker
- NINE.CN
Geometry
- Grade
- 2.61
- Grade Unit
- %
- Intercept
- 1 m
- From
- 117.5 m
- To
- 118.5 m
- Hole Depth
- 158 m
- Intercept Depth
- 107.35 m
Classification
- Deposit Type
- vms
- Program
- exploration
- Sample Type
- drill
- Group ID
- WD-26-14:117.5-118.5
- Mining Method
- underground
Location
- Location
- southwest
- Azimuth
- 295 °
- Dip
- -65 °
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Global
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Metal Eq. Grade
- 6.83
- Metal Eq. Unit
- % Cu-Eq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-24T00:00:00.000Z
Reasoning: This interval shows exceptional Cu-Eq grade, contributing significantly to the overall mineralized zone and strengthening with depth.
Positive factors
- Exceptional Cu-Eq grade
- Grades strengthen with depth
Evidence · table
“6.83%”
Context: 1.00
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
WD-26-14Wedge · copperGrade: 4.23Grade Unit: %Intercept: 1 mView all detailsHide details
Identity
- Hole ID
- WD-26-14
- Project
- Wedge
- Commodity
- copper
- Region
- canada_nb
- Reported Region
- canada_nb
- Ticker
- NINE.CN
Geometry
- Grade
- 4.23
- Grade Unit
- %
- Intercept
- 1 m
- From
- 118.5 m
- To
- 119.5 m
- Hole Depth
- 158 m
- Intercept Depth
- 107.35 m
Classification
- Deposit Type
- vms
- Program
- exploration
- Sample Type
- drill
- Group ID
- WD-26-14:118.5-119.5
- Mining Method
- underground
Location
- Location
- southwest
- Azimuth
- 295 °
- Dip
- -65 °
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Global
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Metal Eq. Grade
- 7.42
- Metal Eq. Unit
- % Cu-Eq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-24T00:00:00.000Z
Reasoning: This interval shows exceptional Cu-Eq grade, continuing the trend of strengthening mineralization with depth.
Positive factors
- Exceptional Cu-Eq grade
- Grades strengthen with depth
Evidence · table
“7.42%”
Context: 1.00
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
WD-26-14Wedge · copperGrade: 4.57Grade Unit: %Intercept: 1 mView all detailsHide details
Identity
- Hole ID
- WD-26-14
- Project
- Wedge
- Commodity
- copper
- Region
- canada_nb
- Reported Region
- canada_nb
- Ticker
- NINE.CN
Geometry
- Grade
- 4.57
- Grade Unit
- %
- Intercept
- 1 m
- From
- 119.5 m
- To
- 120.5 m
- Hole Depth
- 158 m
- Intercept Depth
- 107.35 m
Classification
- Deposit Type
- vms
- Program
- exploration
- Sample Type
- drill
- Group ID
- WD-26-14:119.5-120.5
- Mining Method
- underground
Location
- Location
- southwest
- Azimuth
- 295 °
- Dip
- -65 °
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Global
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Metal Eq. Grade
- 8.31
- Metal Eq. Unit
- % Cu-Eq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-24T00:00:00.000Z
Reasoning: This interval shows exceptional Cu-Eq grade, representing a peak in mineralization and continuing the trend of strengthening with depth.
Positive factors
- Exceptional Cu-Eq grade
- Grades strengthen with depth
Evidence · table
“8.31%”
Context: 1.00
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
WD-26-14Wedge · copperGrade: 3.41Grade Unit: %Intercept: 1 mView all detailsHide details
Identity
- Hole ID
- WD-26-14
- Project
- Wedge
- Commodity
- copper
- Region
- canada_nb
- Reported Region
- canada_nb
- Ticker
- NINE.CN
Geometry
- Grade
- 3.41
- Grade Unit
- %
- Intercept
- 1 m
- From
- 120.5 m
- To
- 121.5 m
- Hole Depth
- 158 m
- Intercept Depth
- 107.35 m
Classification
- Deposit Type
- vms
- Program
- exploration
- Sample Type
- drill
- Group ID
- WD-26-14:120.5-121.5
- Mining Method
- underground
Location
- Location
- southwest
- Azimuth
- 295 °
- Dip
- -65 °
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Global
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Metal Eq. Grade
- 8.59
- Metal Eq. Unit
- % Cu-Eq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-24T00:00:00.000Z
Reasoning: This interval represents the peak Cu-Eq grade for the hole, demonstrating exceptional polymetallic mineralization and a strong trend of increasing grades with depth.
Positive factors
- Exceptional Cu-Eq grade
- Grades strengthen with depth
- Peak sample
Evidence · table
“8.59%”
Context: 1.00
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
WD-26-14Wedge · copperGrade: 0.08Grade Unit: %Intercept: 1 mView all detailsHide details
Identity
- Hole ID
- WD-26-14
- Project
- Wedge
- Commodity
- copper
- Region
- canada_nb
- Reported Region
- canada_nb
- Ticker
- NINE.CN
Geometry
- Grade
- 0.08
- Grade Unit
- %
- Intercept
- 1 m
- From
- 121.5 m
- To
- 122.5 m
- Hole Depth
- 158 m
- Intercept Depth
- 107.35 m
Classification
- Deposit Type
- vms
- Program
- exploration
- Sample Type
- drill
- Group ID
- WD-26-14:121.5-122.5
- Mining Method
- underground
Location
- Location
- southwest
- Azimuth
- 295 °
- Dip
- -65 °
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Global
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Metal Eq. Grade
- 0.22
- Metal Eq. Unit
- % Cu-Eq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-24T00:00:00.000Z
Reasoning: This interval shows very low Cu-Eq grade, indicating it is outside the main mineralized zone.
Negative factors
- Low grade
Evidence · table
“0.22%”
Context: 1.00
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
WD-26-14Wedge · copperGrade: 0.07Grade Unit: %Intercept: 1 mView all detailsHide details
Identity
- Hole ID
- WD-26-14
- Project
- Wedge
- Commodity
- copper
- Region
- canada_nb
- Reported Region
- canada_nb
- Ticker
- NINE.CN
Geometry
- Grade
- 0.07
- Grade Unit
- %
- Intercept
- 1 m
- From
- 122.5 m
- To
- 123.5 m
- Hole Depth
- 158 m
- Intercept Depth
- 107.35 m
Classification
- Deposit Type
- vms
- Program
- exploration
- Sample Type
- drill
- Group ID
- WD-26-14:122.5-123.5
- Mining Method
- underground
Location
- Location
- southwest
- Azimuth
- 295 °
- Dip
- -65 °
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Global
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Metal Eq. Grade
- 0.16
- Metal Eq. Unit
- % Cu-Eq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-24T00:00:00.000Z
Reasoning: This interval shows very low Cu-Eq grade, indicating it is outside the main mineralized zone.
Negative factors
- Low grade
Evidence · table
“0.16%”
Context: 1.00
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
WD-26-14Wedge · copperGrade: 0.03Grade Unit: %Intercept: 1.5 mView all detailsHide details
Identity
- Hole ID
- WD-26-14
- Project
- Wedge
- Commodity
- copper
- Region
- canada_nb
- Reported Region
- canada_nb
- Ticker
- NINE.CN
Geometry
- Grade
- 0.03
- Grade Unit
- %
- Intercept
- 1.5 m
- From
- 123.5 m
- To
- 125 m
- Hole Depth
- 158 m
- Intercept Depth
- 107.35 m
Classification
- Deposit Type
- vms
- Program
- exploration
- Sample Type
- drill
- Group ID
- WD-26-14:123.5-125
- Mining Method
- underground
Location
- Location
- southwest
- Azimuth
- 295 °
- Dip
- -65 °
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Global
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Metal Eq. Grade
- 0.2
- Metal Eq. Unit
- % Cu-Eq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-24T00:00:00.000Z
Reasoning: This interval shows very low Cu-Eq grade, indicating it is outside the main mineralized zone.
Negative factors
- Low grade
Evidence · table
“0.20%”
Context: 1.50
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
WD-26-14Wedge · copperGrade: 0.13Grade Unit: %Intercept: 1.5 mView all detailsHide details
Identity
- Hole ID
- WD-26-14
- Project
- Wedge
- Commodity
- copper
- Region
- canada_nb
- Reported Region
- canada_nb
- Ticker
- NINE.CN
Geometry
- Grade
- 0.13
- Grade Unit
- %
- Intercept
- 1.5 m
- From
- 125 m
- To
- 126.5 m
- Hole Depth
- 158 m
- Intercept Depth
- 107.35 m
Classification
- Deposit Type
- vms
- Program
- exploration
- Sample Type
- drill
- Group ID
- WD-26-14:125-126.5
- Mining Method
- underground
Location
- Location
- southwest
- Azimuth
- 295 °
- Dip
- -65 °
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Global
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Metal Eq. Grade
- 0.23
- Metal Eq. Unit
- % Cu-Eq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-24T00:00:00.000Z
Reasoning: This interval shows very low Cu-Eq grade, indicating it is outside the main mineralized zone.
Negative factors
- Low grade
Evidence · table
“0.23%”
Context: 1.50
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
WD-26-14Wedge · copperGrade: 0.21Grade Unit: %Intercept: 1.5 mView all detailsHide details
Identity
- Hole ID
- WD-26-14
- Project
- Wedge
- Commodity
- copper
- Region
- canada_nb
- Reported Region
- canada_nb
- Ticker
- NINE.CN
Geometry
- Grade
- 0.21
- Grade Unit
- %
- Intercept
- 1.5 m
- From
- 126.5 m
- To
- 128 m
- Hole Depth
- 158 m
- Intercept Depth
- 107.35 m
Classification
- Deposit Type
- vms
- Program
- exploration
- Sample Type
- drill
- Group ID
- WD-26-14:126.5-128
- Mining Method
- underground
Location
- Location
- southwest
- Azimuth
- 295 °
- Dip
- -65 °
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Global
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Metal Eq. Grade
- 0.29
- Metal Eq. Unit
- % Cu-Eq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-24T00:00:00.000Z
Reasoning: This interval shows very low Cu-Eq grade, indicating it is outside the main mineralized zone.
Negative factors
- Low grade
Evidence · table
“0.29%”
Context: 1.50
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
WD-26-14Wedge · copperGrade: 0.06Grade Unit: %Intercept: 1.5 mView all detailsHide details
Identity
- Hole ID
- WD-26-14
- Project
- Wedge
- Commodity
- copper
- Region
- canada_nb
- Reported Region
- canada_nb
- Ticker
- NINE.CN
Geometry
- Grade
- 0.06
- Grade Unit
- %
- Intercept
- 1.5 m
- From
- 128 m
- To
- 129.5 m
- Hole Depth
- 158 m
- Intercept Depth
- 107.35 m
Classification
- Deposit Type
- vms
- Program
- exploration
- Sample Type
- drill
- Group ID
- WD-26-14:128-129.5
- Mining Method
- underground
Location
- Location
- southwest
- Azimuth
- 295 °
- Dip
- -65 °
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Global
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Metal Eq. Grade
- 0.1
- Metal Eq. Unit
- % Cu-Eq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-24T00:00:00.000Z
Reasoning: This interval shows very low Cu-Eq grade, indicating it is outside the main mineralized zone.
Negative factors
- Low grade
Evidence · table
“0.10%”
Context: 1.50
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
WD-26-14Wedge · copperGrade: 0.02Grade Unit: %Intercept: 1.5 mView all detailsHide details
Identity
- Hole ID
- WD-26-14
- Project
- Wedge
- Commodity
- copper
- Region
- canada_nb
- Reported Region
- canada_nb
- Ticker
- NINE.CN
Geometry
- Grade
- 0.02
- Grade Unit
- %
- Intercept
- 1.5 m
- From
- 129.5 m
- To
- 131 m
- Hole Depth
- 158 m
- Intercept Depth
- 107.35 m
Classification
- Deposit Type
- vms
- Program
- exploration
- Sample Type
- drill
- Group ID
- WD-26-14:129.5-131
- Mining Method
- underground
Location
- Location
- southwest
- Azimuth
- 295 °
- Dip
- -65 °
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Global
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Metal Eq. Grade
- 0.06
- Metal Eq. Unit
- % Cu-Eq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-24T00:00:00.000Z
Reasoning: This interval shows very low Cu-Eq grade, indicating it is outside the main mineralized zone.
Negative factors
- Low grade
Evidence · table
“0.06%”
Context: 1.50
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
WD-26-14Wedge · copperGrade: 0.02Grade Unit: %Intercept: 1.5 mView all detailsHide details
Identity
- Hole ID
- WD-26-14
- Project
- Wedge
- Commodity
- copper
- Region
- canada_nb
- Reported Region
- canada_nb
- Ticker
- NINE.CN
Geometry
- Grade
- 0.02
- Grade Unit
- %
- Intercept
- 1.5 m
- From
- 131 m
- To
- 132.5 m
- Hole Depth
- 158 m
- Intercept Depth
- 107.35 m
Classification
- Deposit Type
- vms
- Program
- exploration
- Sample Type
- drill
- Group ID
- WD-26-14:131-132.5
- Mining Method
- underground
Location
- Location
- southwest
- Azimuth
- 295 °
- Dip
- -65 °
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Global
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Metal Eq. Grade
- 0.05
- Metal Eq. Unit
- % Cu-Eq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-24T00:00:00.000Z
Reasoning: This interval shows very low Cu-Eq grade, indicating it is outside the main mineralized zone.
Negative factors
- Low grade
Evidence · table
“0.05%”
Context: 1.50
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
WD-26-14Wedge · copperGrade: 0Grade Unit: %Intercept: 1.5 mView all detailsHide details
Identity
- Hole ID
- WD-26-14
- Project
- Wedge
- Commodity
- copper
- Region
- canada_nb
- Reported Region
- canada_nb
- Ticker
- NINE.CN
Geometry
- Grade
- 0
- Grade Unit
- %
- Intercept
- 1.5 m
- From
- 132.5 m
- To
- 134 m
- Hole Depth
- 158 m
- Intercept Depth
- 107.35 m
Classification
- Deposit Type
- vms
- Program
- exploration
- Sample Type
- drill
- Group ID
- WD-26-14:132.5-134
- Mining Method
- underground
Location
- Location
- southwest
- Azimuth
- 295 °
- Dip
- -65 °
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Global
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Metal Eq. Grade
- 0.02
- Metal Eq. Unit
- % Cu-Eq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-24T00:00:00.000Z
Reasoning: This interval shows very low Cu-Eq grade, indicating it is outside the main mineralized zone.
Negative factors
- Low grade
Evidence · table
“0.02%”
Context: 1.50
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
WD-26-14Wedge · copperGrade: 0.02Grade Unit: %Intercept: 1.5 mView all detailsHide details
Identity
- Hole ID
- WD-26-14
- Project
- Wedge
- Commodity
- copper
- Region
- canada_nb
- Reported Region
- canada_nb
- Ticker
- NINE.CN
Geometry
- Grade
- 0.02
- Grade Unit
- %
- Intercept
- 1.5 m
- From
- 134 m
- To
- 135.5 m
- Hole Depth
- 158 m
- Intercept Depth
- 107.35 m
Classification
- Deposit Type
- vms
- Program
- exploration
- Sample Type
- drill
- Group ID
- WD-26-14:134-135.5
- Mining Method
- underground
Location
- Location
- southwest
- Azimuth
- 295 °
- Dip
- -65 °
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Global
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Metal Eq. Grade
- 0.05
- Metal Eq. Unit
- % Cu-Eq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-24T00:00:00.000Z
Reasoning: This interval shows very low Cu-Eq grade, indicating it is outside the main mineralized zone.
Negative factors
- Low grade
Evidence · table
“0.05%”
Context: 1.50
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
WD-26-14Wedge · copperGrade: 0.06Grade Unit: %Intercept: 1.5 mView all detailsHide details
Identity
- Hole ID
- WD-26-14
- Project
- Wedge
- Commodity
- copper
- Region
- canada_nb
- Reported Region
- canada_nb
- Ticker
- NINE.CN
Geometry
- Grade
- 0.06
- Grade Unit
- %
- Intercept
- 1.5 m
- From
- 135.5 m
- To
- 137 m
- Hole Depth
- 158 m
- Intercept Depth
- 107.35 m
Classification
- Deposit Type
- vms
- Program
- exploration
- Sample Type
- drill
- Group ID
- WD-26-14:135.5-137
- Mining Method
- underground
Location
- Location
- southwest
- Azimuth
- 295 °
- Dip
- -65 °
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Global
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Metal Eq. Grade
- 0.13
- Metal Eq. Unit
- % Cu-Eq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-24T00:00:00.000Z
Reasoning: This interval shows very low Cu-Eq grade, indicating it is outside the main mineralized zone.
Negative factors
- Low grade
Evidence · table
“0.13%”
Context: 1.50
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
WD-26-14Wedge · copperGrade: 0.12Grade Unit: %Intercept: 1.5 mView all detailsHide details
Identity
- Hole ID
- WD-26-14
- Project
- Wedge
- Commodity
- copper
- Region
- canada_nb
- Reported Region
- canada_nb
- Ticker
- NINE.CN
Geometry
- Grade
- 0.12
- Grade Unit
- %
- Intercept
- 1.5 m
- From
- 137 m
- To
- 138.5 m
- Hole Depth
- 158 m
- Intercept Depth
- 107.35 m
Classification
- Deposit Type
- vms
- Program
- exploration
- Sample Type
- drill
- Group ID
- WD-26-14:137-138.5
- Mining Method
- underground
Location
- Location
- southwest
- Azimuth
- 295 °
- Dip
- -65 °
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Global
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Metal Eq. Grade
- 0.21
- Metal Eq. Unit
- % Cu-Eq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-24T00:00:00.000Z
Reasoning: This interval shows very low Cu-Eq grade, indicating it is outside the main mineralized zone.
Negative factors
- Low grade
Evidence · table
“0.21%”
Context: 1.50
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
WD-26-14Wedge · copperGrade: 0.23Grade Unit: %Intercept: 1.5 mView all detailsHide details
Identity
- Hole ID
- WD-26-14
- Project
- Wedge
- Commodity
- copper
- Region
- canada_nb
- Reported Region
- canada_nb
- Ticker
- NINE.CN
Geometry
- Grade
- 0.23
- Grade Unit
- %
- Intercept
- 1.5 m
- From
- 138.5 m
- To
- 140 m
- Hole Depth
- 158 m
- Intercept Depth
- 107.35 m
Classification
- Deposit Type
- vms
- Program
- exploration
- Sample Type
- drill
- Group ID
- WD-26-14:138.5-140
- Mining Method
- underground
Location
- Location
- southwest
- Azimuth
- 295 °
- Dip
- -65 °
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Global
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Metal Eq. Grade
- 0.31
- Metal Eq. Unit
- % Cu-Eq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-24T00:00:00.000Z
Reasoning: This interval shows very low Cu-Eq grade, indicating it is outside the main mineralized zone.
Negative factors
- Low grade
Evidence · table
“0.31%”
Context: 1.50
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
WD-26-14Wedge · copperGrade: 0.16Grade Unit: %Intercept: 1.5 mView all detailsHide details
Identity
- Hole ID
- WD-26-14
- Project
- Wedge
- Commodity
- copper
- Region
- canada_nb
- Reported Region
- canada_nb
- Ticker
- NINE.CN
Geometry
- Grade
- 0.16
- Grade Unit
- %
- Intercept
- 1.5 m
- From
- 140 m
- To
- 141.5 m
- Hole Depth
- 158 m
- Intercept Depth
- 107.35 m
Classification
- Deposit Type
- vms
- Program
- exploration
- Sample Type
- drill
- Group ID
- WD-26-14:140-141.5
- Mining Method
- underground
Location
- Location
- southwest
- Azimuth
- 295 °
- Dip
- -65 °
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Global
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Metal Eq. Grade
- 0.23
- Metal Eq. Unit
- % Cu-Eq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-24T00:00:00.000Z
Reasoning: This interval shows very low Cu-Eq grade, indicating it is outside the main mineralized zone.
Negative factors
- Low grade
Evidence · table
“0.23%”
Context: 1.50
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
WD-26-14Wedge · copperGrade: 0Grade Unit: %Intercept: 1.5 mView all detailsHide details
Identity
- Hole ID
- WD-26-14
- Project
- Wedge
- Commodity
- copper
- Region
- canada_nb
- Reported Region
- canada_nb
- Ticker
- NINE.CN
Geometry
- Grade
- 0
- Grade Unit
- %
- Intercept
- 1.5 m
- From
- 141.5 m
- To
- 143 m
- Hole Depth
- 158 m
- Intercept Depth
- 107.35 m
Classification
- Deposit Type
- vms
- Program
- exploration
- Sample Type
- drill
- Group ID
- WD-26-14:141.5-143
- Mining Method
- underground
Location
- Location
- southwest
- Azimuth
- 295 °
- Dip
- -65 °
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Global
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Metal Eq. Grade
- 0.05
- Metal Eq. Unit
- % Cu-Eq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-24T00:00:00.000Z
Reasoning: This interval shows very low Cu-Eq grade, indicating it is outside the main mineralized zone.
Negative factors
- Low grade
Evidence · table
“0.05%”
Context: 1.50
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
WD-26-14Wedge · copperGrade: 0Grade Unit: %Intercept: 1.5 mView all detailsHide details
Identity
- Hole ID
- WD-26-14
- Project
- Wedge
- Commodity
- copper
- Region
- canada_nb
- Reported Region
- canada_nb
- Ticker
- NINE.CN
Geometry
- Grade
- 0
- Grade Unit
- %
- Intercept
- 1.5 m
- From
- 143 m
- To
- 144.5 m
- Hole Depth
- 158 m
- Intercept Depth
- 107.35 m
Classification
- Deposit Type
- vms
- Program
- exploration
- Sample Type
- drill
- Group ID
- WD-26-14:143-144.5
- Mining Method
- underground
Location
- Location
- southwest
- Azimuth
- 295 °
- Dip
- -65 °
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Global
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Metal Eq. Grade
- 0.04
- Metal Eq. Unit
- % Cu-Eq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-24T00:00:00.000Z
Reasoning: This interval shows very low Cu-Eq grade, indicating it is outside the main mineralized zone.
Negative factors
- Low grade
Evidence · table
“0.04%”
Context: 1.50
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
WD-26-14Wedge · copperGrade: 0Grade Unit: %Intercept: 1.5 mView all detailsHide details
Identity
- Hole ID
- WD-26-14
- Project
- Wedge
- Commodity
- copper
- Region
- canada_nb
- Reported Region
- canada_nb
- Ticker
- NINE.CN
Geometry
- Grade
- 0
- Grade Unit
- %
- Intercept
- 1.5 m
- From
- 144.5 m
- To
- 146 m
- Hole Depth
- 158 m
- Intercept Depth
- 107.35 m
Classification
- Deposit Type
- vms
- Program
- exploration
- Sample Type
- drill
- Group ID
- WD-26-14:144.5-146
- Mining Method
- underground
Location
- Location
- southwest
- Azimuth
- 295 °
- Dip
- -65 °
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Global
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Metal Eq. Grade
- 0.03
- Metal Eq. Unit
- % Cu-Eq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-24T00:00:00.000Z
Reasoning: This interval shows very low Cu-Eq grade, indicating it is outside the main mineralized zone.
Negative factors
- Low grade
Evidence · table
“0.03%”
Context: 1.50
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
WD-26-14Wedge · copperGrade: 0Grade Unit: %Intercept: 1.5 mView all detailsHide details
Identity
- Hole ID
- WD-26-14
- Project
- Wedge
- Commodity
- copper
- Region
- canada_nb
- Reported Region
- canada_nb
- Ticker
- NINE.CN
Geometry
- Grade
- 0
- Grade Unit
- %
- Intercept
- 1.5 m
- From
- 146 m
- To
- 147.5 m
- Hole Depth
- 158 m
- Intercept Depth
- 107.35 m
Classification
- Deposit Type
- vms
- Program
- exploration
- Sample Type
- drill
- Group ID
- WD-26-14:146-147.5
- Mining Method
- underground
Location
- Location
- southwest
- Azimuth
- 295 °
- Dip
- -65 °
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Global
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Metal Eq. Grade
- 0.04
- Metal Eq. Unit
- % Cu-Eq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-24T00:00:00.000Z
Reasoning: This interval shows very low Cu-Eq grade, indicating it is outside the main mineralized zone.
Negative factors
- Low grade
Evidence · table
“0.04%”
Context: 1.50
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
WD-26-14Wedge · copperGrade: 0Grade Unit: %Intercept: 1.5 mView all detailsHide details
Identity
- Hole ID
- WD-26-14
- Project
- Wedge
- Commodity
- copper
- Region
- canada_nb
- Reported Region
- canada_nb
- Ticker
- NINE.CN
Geometry
- Grade
- 0
- Grade Unit
- %
- Intercept
- 1.5 m
- From
- 147.5 m
- To
- 149 m
- Hole Depth
- 158 m
- Intercept Depth
- 107.35 m
Classification
- Deposit Type
- vms
- Program
- exploration
- Sample Type
- drill
- Group ID
- WD-26-14:147.5-149
- Mining Method
- underground
Location
- Location
- southwest
- Azimuth
- 295 °
- Dip
- -65 °
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Global
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Metal Eq. Grade
- 0.02
- Metal Eq. Unit
- % Cu-Eq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-24T00:00:00.000Z
Reasoning: This interval shows very low Cu-Eq grade, indicating it is outside the main mineralized zone.
Negative factors
- Low grade
Evidence · table
“0.02%”
Context: 1.50
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
WD-26-14Wedge · copperGrade: 0Grade Unit: %Intercept: 1.5 mView all detailsHide details
Identity
- Hole ID
- WD-26-14
- Project
- Wedge
- Commodity
- copper
- Region
- canada_nb
- Reported Region
- canada_nb
- Ticker
- NINE.CN
Geometry
- Grade
- 0
- Grade Unit
- %
- Intercept
- 1.5 m
- From
- 149 m
- To
- 150.5 m
- Hole Depth
- 158 m
- Intercept Depth
- 107.35 m
Classification
- Deposit Type
- vms
- Program
- exploration
- Sample Type
- drill
- Group ID
- WD-26-14:149-150.5
- Mining Method
- underground
Location
- Location
- southwest
- Azimuth
- 295 °
- Dip
- -65 °
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Global
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Metal Eq. Grade
- 0.03
- Metal Eq. Unit
- % Cu-Eq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-24T00:00:00.000Z
Reasoning: This interval shows very low Cu-Eq grade, indicating it is outside the main mineralized zone.
Negative factors
- Low grade
Evidence · table
“0.03%”
Context: 1.50
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
WD-26-14Wedge · copperGrade: 0Grade Unit: %Intercept: 1.5 mView all detailsHide details
Identity
- Hole ID
- WD-26-14
- Project
- Wedge
- Commodity
- copper
- Region
- canada_nb
- Reported Region
- canada_nb
- Ticker
- NINE.CN
Geometry
- Grade
- 0
- Grade Unit
- %
- Intercept
- 1.5 m
- From
- 150.5 m
- To
- 152 m
- Hole Depth
- 158 m
- Intercept Depth
- 107.35 m
Classification
- Deposit Type
- vms
- Program
- exploration
- Sample Type
- drill
- Group ID
- WD-26-14:150.5-152
- Mining Method
- underground
Location
- Location
- southwest
- Azimuth
- 295 °
- Dip
- -65 °
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Global
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Metal Eq. Grade
- 0.02
- Metal Eq. Unit
- % Cu-Eq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-24T00:00:00.000Z
Reasoning: This interval shows very low Cu-Eq grade, indicating it is outside the main mineralized zone.
Negative factors
- Low grade
Evidence · table
“0.02%”
Context: 1.50
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
WD-26-14Wedge · copperGrade: 0Grade Unit: %Intercept: 1.5 mView all detailsHide details
Identity
- Hole ID
- WD-26-14
- Project
- Wedge
- Commodity
- copper
- Region
- canada_nb
- Reported Region
- canada_nb
- Ticker
- NINE.CN
Geometry
- Grade
- 0
- Grade Unit
- %
- Intercept
- 1.5 m
- From
- 152 m
- To
- 153.5 m
- Hole Depth
- 158 m
- Intercept Depth
- 107.35 m
Classification
- Deposit Type
- vms
- Program
- exploration
- Sample Type
- drill
- Group ID
- WD-26-14:152-153.5
- Mining Method
- underground
Location
- Location
- southwest
- Azimuth
- 295 °
- Dip
- -65 °
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Global
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Metal Eq. Grade
- 0.04
- Metal Eq. Unit
- % Cu-Eq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-24T00:00:00.000Z
Reasoning: This interval shows very low Cu-Eq grade, indicating it is outside the main mineralized zone.
Negative factors
- Low grade
Evidence · table
“0.04%”
Context: 1.50
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
WD-26-14Wedge · silverGrade: 49.33Grade Unit: g/tIntercept: 6 mView all detailsHide details
Identity
- Hole ID
- WD-26-14
- Project
- Wedge
- Commodity
- silver
- Region
- canada_nb
- Reported Region
- canada_nb
- Ticker
- NINE.CN
Geometry
- Grade
- 49.33
- Grade Unit
- g/t
- Intercept
- 6 m
- From
- 115.5 m
- To
- 121.5 m
- Hole Depth
- 158 m
- Intercept Depth
- 115.5 m
Classification
- Deposit Type
- vms
- Sample Type
- drill
- Group ID
- WD-26-14:115.5-121.5
- Mining Method
- underground
Location
- Azimuth
- 295 °
- Dip
- -65 °
QA/QC
- Laboratory
- ALS Global
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Metal Eq. Grade
- 7.45
- Metal Eq. Unit
- % Cu-Eq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-24T00:00:00.000Z
Reasoning: Expanded from assay table. 49.33 g/t silver is weak against the default band [500, 200, 100, 30] g/t. Grade×width 296.0 g/t·m is weak.
Negative factors
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“49.33”
Context: TABLE 1: KEY INTERSECTIONS (WEIGHTED AVE
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
WD-26-14Wedge · goldGrade: 0.98Grade Unit: g/tIntercept: 6 mView all detailsHide details
Identity
- Hole ID
- WD-26-14
- Project
- Wedge
- Commodity
- gold
- Region
- canada_nb
- Reported Region
- canada_nb
- Ticker
- NINE.CN
Geometry
- Grade
- 0.98
- Grade Unit
- g/t
- Intercept
- 6 m
- From
- 115.5 m
- To
- 121.5 m
- Hole Depth
- 158 m
- Intercept Depth
- 115.5 m
Classification
- Deposit Type
- vms
- Sample Type
- drill
- Group ID
- WD-26-14:115.5-121.5
- Mining Method
- underground
Location
- Azimuth
- 295 °
- Dip
- -65 °
QA/QC
- Laboratory
- ALS Global
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Metal Eq. Grade
- 7.45
- Metal Eq. Unit
- % Cu-Eq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-24T00:00:00.000Z
Reasoning: Expanded from assay table. 0.98 g/t gold is below against the underground mining band [15, 7, 4, 2.5] g/t. Grade×width 5.9 g/t·m is below.
Negative factors
- 0.98 g/t gold is below the weak threshold (2.5 g/t) on the underground mining band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.98”
Context: TABLE 1: KEY INTERSECTIONS (WEIGHTED AVE
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
WD-26-14Wedge · leadGrade: 1.25Grade Unit: %Intercept: 6 mView all detailsHide details
Identity
- Hole ID
- WD-26-14
- Project
- Wedge
- Commodity
- lead
- Region
- canada_nb
- Reported Region
- canada_nb
- Ticker
- NINE.CN
Geometry
- Grade
- 1.25
- Grade Unit
- %
- Intercept
- 6 m
- From
- 115.5 m
- To
- 121.5 m
- Hole Depth
- 158 m
- Intercept Depth
- 115.5 m
Classification
- Deposit Type
- vms
- Sample Type
- drill
- Group ID
- WD-26-14:115.5-121.5
- Mining Method
- underground
Location
- Azimuth
- 295 °
- Dip
- -65 °
QA/QC
- Laboratory
- ALS Global
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Metal Eq. Grade
- 7.45
- Metal Eq. Unit
- % Cu-Eq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-24T00:00:00.000Z
Reasoning: Expanded from assay table. 1.25 % lead is weak against the default band [10, 6, 3, 1] %. Grade×width 7.5 %·m is below (grade alone is weak; the better of the two is used).
Negative factors
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“1.25”
Context: TABLE 1: KEY INTERSECTIONS (WEIGHTED AVE
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
WD-26-14Wedge · zincGrade: 7.77Grade Unit: %Intercept: 6 mView all detailsHide details
Identity
- Hole ID
- WD-26-14
- Project
- Wedge
- Commodity
- zinc
- Region
- canada_nb
- Reported Region
- canada_nb
- Ticker
- NINE.CN
Geometry
- Grade
- 7.77
- Grade Unit
- %
- Intercept
- 6 m
- From
- 115.5 m
- To
- 121.5 m
- Hole Depth
- 158 m
- Intercept Depth
- 115.5 m
Classification
- Deposit Type
- vms
- Sample Type
- drill
- Group ID
- WD-26-14:115.5-121.5
- Mining Method
- underground
Location
- Azimuth
- 295 °
- Dip
- -65 °
QA/QC
- Laboratory
- ALS Global
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Metal Eq. Grade
- 7.45
- Metal Eq. Unit
- % Cu-Eq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-24T00:00:00.000Z
Reasoning: Expanded from assay table. 7.77 % zinc is moderate against the default band [18, 10, 5, 2] %. Grade×width 46.6 %·m is moderate.
Negative factors
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“7.77”
Context: TABLE 1: KEY INTERSECTIONS (WEIGHTED AVE
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
WD-26-14Wedge · goldGrade: 0.008Grade Unit: g/tIntercept: 1.3 mView all detailsHide details
Identity
- Hole ID
- WD-26-14
- Project
- Wedge
- Commodity
- gold
- Region
- canada_nb
- Reported Region
- canada_nb
- Ticker
- NINE.CN
Geometry
- Grade
- 0.008
- Grade Unit
- g/t
- Intercept
- 1.3 m
- From
- 105 m
- To
- 106.3 m
- Hole Depth
- 158 m
- Intercept Depth
- 105 m
Classification
- Deposit Type
- vms
- Sample Type
- drill
- Group ID
- WD-26-14:105-106.3
- Mining Method
- underground
Location
- Azimuth
- 295 °
- Dip
- -65 °
QA/QC
- Laboratory
- ALS Global
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Metal Eq. Grade
- 0.03
- Metal Eq. Unit
- % Cu-Eq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-24T00:00:00.000Z
Reasoning: Expanded from assay table. 0.008 g/t gold is below against the underground mining band [15, 7, 4, 2.5] g/t. Grade×width 0.0 g/t·m is below.
Negative factors
- 0.008 g/t gold is below the weak threshold (2.5 g/t) on the underground mining band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.008”
Context: TABLE 2 · DDH WD-26-14 CERTIFIED ASSAYS
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
WD-26-14Wedge · leadGrade: 0Grade Unit: %Intercept: 1.3 mView all detailsHide details
Identity
- Hole ID
- WD-26-14
- Project
- Wedge
- Commodity
- lead
- Region
- canada_nb
- Reported Region
- canada_nb
- Ticker
- NINE.CN
Geometry
- Grade
- 0
- Grade Unit
- %
- Intercept
- 1.3 m
- From
- 105 m
- To
- 106.3 m
- Hole Depth
- 158 m
- Intercept Depth
- 105 m
Classification
- Deposit Type
- vms
- Sample Type
- drill
- Group ID
- WD-26-14:105-106.3
- Mining Method
- underground
Location
- Azimuth
- 295 °
- Dip
- -65 °
QA/QC
- Laboratory
- ALS Global
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Metal Eq. Grade
- 0.03
- Metal Eq. Unit
- % Cu-Eq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-24T00:00:00.000Z
Reasoning: Expanded from assay table. 0 % lead is below against the default band [10, 6, 3, 1] %. Grade×width 0.0 %·m is below.
Negative factors
- 0 % lead is below the weak threshold (1 %) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.00”
Context: TABLE 2 · DDH WD-26-14 CERTIFIED ASSAYS
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
WD-26-14Wedge · zincGrade: 0.02Grade Unit: %Intercept: 1.3 mView all detailsHide details
Identity
- Hole ID
- WD-26-14
- Project
- Wedge
- Commodity
- zinc
- Region
- canada_nb
- Reported Region
- canada_nb
- Ticker
- NINE.CN
Geometry
- Grade
- 0.02
- Grade Unit
- %
- Intercept
- 1.3 m
- From
- 105 m
- To
- 106.3 m
- Hole Depth
- 158 m
- Intercept Depth
- 105 m
Classification
- Deposit Type
- vms
- Sample Type
- drill
- Group ID
- WD-26-14:105-106.3
- Mining Method
- underground
Location
- Azimuth
- 295 °
- Dip
- -65 °
QA/QC
- Laboratory
- ALS Global
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Metal Eq. Grade
- 0.03
- Metal Eq. Unit
- % Cu-Eq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-24T00:00:00.000Z
Reasoning: Expanded from assay table. 0.02 % zinc is below against the default band [18, 10, 5, 2] %. Grade×width 0.0 %·m is below.
Negative factors
- 0.02 % zinc is below the weak threshold (2 %) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.02”
Context: TABLE 2 · DDH WD-26-14 CERTIFIED ASSAYS
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
WD-26-14Wedge · silverGrade: 2Grade Unit: g/tIntercept: 1.05 mView all detailsHide details
Identity
- Hole ID
- WD-26-14
- Project
- Wedge
- Commodity
- silver
- Region
- canada_nb
- Reported Region
- canada_nb
- Ticker
- NINE.CN
Geometry
- Grade
- 2
- Grade Unit
- g/t
- Intercept
- 1.05 m
- From
- 106.3 m
- To
- 107.35 m
- Hole Depth
- 158 m
- Intercept Depth
- 106.3 m
Classification
- Deposit Type
- vms
- Sample Type
- drill
- Group ID
- WD-26-14:106.3-107.35
- Mining Method
- underground
Location
- Azimuth
- 295 °
- Dip
- -65 °
QA/QC
- Laboratory
- ALS Global
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Metal Eq. Grade
- 0.17
- Metal Eq. Unit
- % Cu-Eq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-24T00:00:00.000Z
Reasoning: Expanded from assay table. 2 g/t silver is below against the default band [500, 200, 100, 30] g/t. Grade×width 2.1 g/t·m is below.
Negative factors
- 2 g/t silver is below the weak threshold (30 g/t) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“2”
Context: TABLE 2 · DDH WD-26-14 CERTIFIED ASSAYS
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
WD-26-14Wedge · goldGrade: 0.032Grade Unit: g/tIntercept: 1.05 mView all detailsHide details
Identity
- Hole ID
- WD-26-14
- Project
- Wedge
- Commodity
- gold
- Region
- canada_nb
- Reported Region
- canada_nb
- Ticker
- NINE.CN
Geometry
- Grade
- 0.032
- Grade Unit
- g/t
- Intercept
- 1.05 m
- From
- 106.3 m
- To
- 107.35 m
- Hole Depth
- 158 m
- Intercept Depth
- 106.3 m
Classification
- Deposit Type
- vms
- Sample Type
- drill
- Group ID
- WD-26-14:106.3-107.35
- Mining Method
- underground
Location
- Azimuth
- 295 °
- Dip
- -65 °
QA/QC
- Laboratory
- ALS Global
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Metal Eq. Grade
- 0.17
- Metal Eq. Unit
- % Cu-Eq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-24T00:00:00.000Z
Reasoning: Expanded from assay table. 0.032 g/t gold is below against the underground mining band [15, 7, 4, 2.5] g/t. Grade×width 0.0 g/t·m is below.
Negative factors
- 0.032 g/t gold is below the weak threshold (2.5 g/t) on the underground mining band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.032”
Context: TABLE 2 · DDH WD-26-14 CERTIFIED ASSAYS
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
WD-26-14Wedge · leadGrade: 0.01Grade Unit: %Intercept: 1.05 mView all detailsHide details
Identity
- Hole ID
- WD-26-14
- Project
- Wedge
- Commodity
- lead
- Region
- canada_nb
- Reported Region
- canada_nb
- Ticker
- NINE.CN
Geometry
- Grade
- 0.01
- Grade Unit
- %
- Intercept
- 1.05 m
- From
- 106.3 m
- To
- 107.35 m
- Hole Depth
- 158 m
- Intercept Depth
- 106.3 m
Classification
- Deposit Type
- vms
- Sample Type
- drill
- Group ID
- WD-26-14:106.3-107.35
- Mining Method
- underground
Location
- Azimuth
- 295 °
- Dip
- -65 °
QA/QC
- Laboratory
- ALS Global
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Metal Eq. Grade
- 0.17
- Metal Eq. Unit
- % Cu-Eq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-24T00:00:00.000Z
Reasoning: Expanded from assay table. 0.01 % lead is below against the default band [10, 6, 3, 1] %. Grade×width 0.0 %·m is below.
Negative factors
- 0.01 % lead is below the weak threshold (1 %) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.01”
Context: TABLE 2 · DDH WD-26-14 CERTIFIED ASSAYS
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
WD-26-14Wedge · zincGrade: 0.12Grade Unit: %Intercept: 1.05 mView all detailsHide details
Identity
- Hole ID
- WD-26-14
- Project
- Wedge
- Commodity
- zinc
- Region
- canada_nb
- Reported Region
- canada_nb
- Ticker
- NINE.CN
Geometry
- Grade
- 0.12
- Grade Unit
- %
- Intercept
- 1.05 m
- From
- 106.3 m
- To
- 107.35 m
- Hole Depth
- 158 m
- Intercept Depth
- 106.3 m
Classification
- Deposit Type
- vms
- Sample Type
- drill
- Group ID
- WD-26-14:106.3-107.35
- Mining Method
- underground
Location
- Azimuth
- 295 °
- Dip
- -65 °
QA/QC
- Laboratory
- ALS Global
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Metal Eq. Grade
- 0.17
- Metal Eq. Unit
- % Cu-Eq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-24T00:00:00.000Z
Reasoning: Expanded from assay table. 0.12 % zinc is below against the default band [18, 10, 5, 2] %. Grade×width 0.1 %·m is below.
Negative factors
- 0.12 % zinc is below the weak threshold (2 %) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.12”
Context: TABLE 2 · DDH WD-26-14 CERTIFIED ASSAYS
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
WD-26-14Wedge · silverGrade: 23Grade Unit: g/tIntercept: 1.05 mView all detailsHide details
Identity
- Hole ID
- WD-26-14
- Project
- Wedge
- Commodity
- silver
- Region
- canada_nb
- Reported Region
- canada_nb
- Ticker
- NINE.CN
Geometry
- Grade
- 23
- Grade Unit
- g/t
- Intercept
- 1.05 m
- From
- 107.35 m
- To
- 108.4 m
- Hole Depth
- 158 m
- Intercept Depth
- 107.35 m
Classification
- Deposit Type
- vms
- Sample Type
- drill
- Group ID
- WD-26-14:107.35-108.4
- Mining Method
- underground
Location
- Azimuth
- 295 °
- Dip
- -65 °
QA/QC
- Laboratory
- ALS Global
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Metal Eq. Grade
- 1.72
- Metal Eq. Unit
- % Cu-Eq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-24T00:00:00.000Z
Reasoning: Expanded from assay table. 23 g/t silver is below against the default band [500, 200, 100, 30] g/t. Grade×width 24.2 g/t·m is below.
Negative factors
- 23 g/t silver is below the weak threshold (30 g/t) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“23”
Context: TABLE 2 · DDH WD-26-14 CERTIFIED ASSAYS
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
WD-26-14Wedge · goldGrade: 0.433Grade Unit: g/tIntercept: 1.05 mView all detailsHide details
Identity
- Hole ID
- WD-26-14
- Project
- Wedge
- Commodity
- gold
- Region
- canada_nb
- Reported Region
- canada_nb
- Ticker
- NINE.CN
Geometry
- Grade
- 0.433
- Grade Unit
- g/t
- Intercept
- 1.05 m
- From
- 107.35 m
- To
- 108.4 m
- Hole Depth
- 158 m
- Intercept Depth
- 107.35 m
Classification
- Deposit Type
- vms
- Sample Type
- drill
- Group ID
- WD-26-14:107.35-108.4
- Mining Method
- underground
Location
- Azimuth
- 295 °
- Dip
- -65 °
QA/QC
- Laboratory
- ALS Global
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Metal Eq. Grade
- 1.72
- Metal Eq. Unit
- % Cu-Eq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-24T00:00:00.000Z
Reasoning: Expanded from assay table. 0.433 g/t gold is below against the underground mining band [15, 7, 4, 2.5] g/t. Grade×width 0.5 g/t·m is below.
Negative factors
- 0.433 g/t gold is below the weak threshold (2.5 g/t) on the underground mining band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.433”
Context: TABLE 2 · DDH WD-26-14 CERTIFIED ASSAYS
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
WD-26-14Wedge · leadGrade: 0.09Grade Unit: %Intercept: 1.05 mView all detailsHide details
Identity
- Hole ID
- WD-26-14
- Project
- Wedge
- Commodity
- lead
- Region
- canada_nb
- Reported Region
- canada_nb
- Ticker
- NINE.CN
Geometry
- Grade
- 0.09
- Grade Unit
- %
- Intercept
- 1.05 m
- From
- 107.35 m
- To
- 108.4 m
- Hole Depth
- 158 m
- Intercept Depth
- 107.35 m
Classification
- Deposit Type
- vms
- Sample Type
- drill
- Group ID
- WD-26-14:107.35-108.4
- Mining Method
- underground
Location
- Azimuth
- 295 °
- Dip
- -65 °
QA/QC
- Laboratory
- ALS Global
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Metal Eq. Grade
- 1.72
- Metal Eq. Unit
- % Cu-Eq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-24T00:00:00.000Z
Reasoning: Expanded from assay table. 0.09 % lead is below against the default band [10, 6, 3, 1] %. Grade×width 0.1 %·m is below.
Negative factors
- 0.09 % lead is below the weak threshold (1 %) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.09”
Context: TABLE 2 · DDH WD-26-14 CERTIFIED ASSAYS
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
WD-26-14Wedge · zincGrade: 0.16Grade Unit: %Intercept: 1.05 mView all detailsHide details
Identity
- Hole ID
- WD-26-14
- Project
- Wedge
- Commodity
- zinc
- Region
- canada_nb
- Reported Region
- canada_nb
- Ticker
- NINE.CN
Geometry
- Grade
- 0.16
- Grade Unit
- %
- Intercept
- 1.05 m
- From
- 107.35 m
- To
- 108.4 m
- Hole Depth
- 158 m
- Intercept Depth
- 107.35 m
Classification
- Deposit Type
- vms
- Sample Type
- drill
- Group ID
- WD-26-14:107.35-108.4
- Mining Method
- underground
Location
- Azimuth
- 295 °
- Dip
- -65 °
QA/QC
- Laboratory
- ALS Global
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Metal Eq. Grade
- 1.72
- Metal Eq. Unit
- % Cu-Eq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-24T00:00:00.000Z
Reasoning: Expanded from assay table. 0.16 % zinc is below against the default band [18, 10, 5, 2] %. Grade×width 0.2 %·m is below.
Negative factors
- 0.16 % zinc is below the weak threshold (2 %) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.16”
Context: TABLE 2 · DDH WD-26-14 CERTIFIED ASSAYS
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
WD-26-14Wedge · silverGrade: 35Grade Unit: g/tIntercept: 1.1 mView all detailsHide details
Identity
- Hole ID
- WD-26-14
- Project
- Wedge
- Commodity
- silver
- Region
- canada_nb
- Reported Region
- canada_nb
- Ticker
- NINE.CN
Geometry
- Grade
- 35
- Grade Unit
- g/t
- Intercept
- 1.1 m
- From
- 108.4 m
- To
- 109.5 m
- Hole Depth
- 158 m
- Intercept Depth
- 108.4 m
Classification
- Deposit Type
- vms
- Sample Type
- drill
- Group ID
- WD-26-14:108.4-109.5
- Mining Method
- underground
Location
- Azimuth
- 295 °
- Dip
- -65 °
QA/QC
- Laboratory
- ALS Global
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Metal Eq. Grade
- 2.46
- Metal Eq. Unit
- % Cu-Eq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-24T00:00:00.000Z
Reasoning: Expanded from assay table. 35 g/t silver is weak against the default band [500, 200, 100, 30] g/t. Grade×width 38.5 g/t·m is below (grade alone is weak; the better of the two is used).
Negative factors
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“35”
Context: TABLE 2 · DDH WD-26-14 CERTIFIED ASSAYS
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
WD-26-14Wedge · goldGrade: 0.557Grade Unit: g/tIntercept: 1.1 mView all detailsHide details
Identity
- Hole ID
- WD-26-14
- Project
- Wedge
- Commodity
- gold
- Region
- canada_nb
- Reported Region
- canada_nb
- Ticker
- NINE.CN
Geometry
- Grade
- 0.557
- Grade Unit
- g/t
- Intercept
- 1.1 m
- From
- 108.4 m
- To
- 109.5 m
- Hole Depth
- 158 m
- Intercept Depth
- 108.4 m
Classification
- Deposit Type
- vms
- Sample Type
- drill
- Group ID
- WD-26-14:108.4-109.5
- Mining Method
- underground
Location
- Azimuth
- 295 °
- Dip
- -65 °
QA/QC
- Laboratory
- ALS Global
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Metal Eq. Grade
- 2.46
- Metal Eq. Unit
- % Cu-Eq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-24T00:00:00.000Z
Reasoning: Expanded from assay table. 0.557 g/t gold is below against the underground mining band [15, 7, 4, 2.5] g/t. Grade×width 0.6 g/t·m is below.
Negative factors
- 0.557 g/t gold is below the weak threshold (2.5 g/t) on the underground mining band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.557”
Context: TABLE 2 · DDH WD-26-14 CERTIFIED ASSAYS
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
WD-26-14Wedge · leadGrade: 0.21Grade Unit: %Intercept: 1.1 mView all detailsHide details
Identity
- Hole ID
- WD-26-14
- Project
- Wedge
- Commodity
- lead
- Region
- canada_nb
- Reported Region
- canada_nb
- Ticker
- NINE.CN
Geometry
- Grade
- 0.21
- Grade Unit
- %
- Intercept
- 1.1 m
- From
- 108.4 m
- To
- 109.5 m
- Hole Depth
- 158 m
- Intercept Depth
- 108.4 m
Classification
- Deposit Type
- vms
- Sample Type
- drill
- Group ID
- WD-26-14:108.4-109.5
- Mining Method
- underground
Location
- Azimuth
- 295 °
- Dip
- -65 °
QA/QC
- Laboratory
- ALS Global
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Metal Eq. Grade
- 2.46
- Metal Eq. Unit
- % Cu-Eq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-24T00:00:00.000Z
Reasoning: Expanded from assay table. 0.21 % lead is below against the default band [10, 6, 3, 1] %. Grade×width 0.2 %·m is below.
Negative factors
- 0.21 % lead is below the weak threshold (1 %) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.21”
Context: TABLE 2 · DDH WD-26-14 CERTIFIED ASSAYS
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
WD-26-14Wedge · zincGrade: 0.14Grade Unit: %Intercept: 1.1 mView all detailsHide details
Identity
- Hole ID
- WD-26-14
- Project
- Wedge
- Commodity
- zinc
- Region
- canada_nb
- Reported Region
- canada_nb
- Ticker
- NINE.CN
Geometry
- Grade
- 0.14
- Grade Unit
- %
- Intercept
- 1.1 m
- From
- 108.4 m
- To
- 109.5 m
- Hole Depth
- 158 m
- Intercept Depth
- 108.4 m
Classification
- Deposit Type
- vms
- Sample Type
- drill
- Group ID
- WD-26-14:108.4-109.5
- Mining Method
- underground
Location
- Azimuth
- 295 °
- Dip
- -65 °
QA/QC
- Laboratory
- ALS Global
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Metal Eq. Grade
- 2.46
- Metal Eq. Unit
- % Cu-Eq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-24T00:00:00.000Z
Reasoning: Expanded from assay table. 0.14 % zinc is below against the default band [18, 10, 5, 2] %. Grade×width 0.2 %·m is below.
Negative factors
- 0.14 % zinc is below the weak threshold (2 %) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.14”
Context: TABLE 2 · DDH WD-26-14 CERTIFIED ASSAYS
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
WD-26-14Wedge · silverGrade: 27Grade Unit: g/tIntercept: 1 mView all detailsHide details
Identity
- Hole ID
- WD-26-14
- Project
- Wedge
- Commodity
- silver
- Region
- canada_nb
- Reported Region
- canada_nb
- Ticker
- NINE.CN
Geometry
- Grade
- 27
- Grade Unit
- g/t
- Intercept
- 1 m
- From
- 109.5 m
- To
- 110.5 m
- Hole Depth
- 158 m
- Intercept Depth
- 109.5 m
Classification
- Deposit Type
- vms
- Sample Type
- drill
- Group ID
- WD-26-14:109.5-110.5
- Mining Method
- underground
Location
- Azimuth
- 295 °
- Dip
- -65 °
QA/QC
- Laboratory
- ALS Global
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Metal Eq. Grade
- 2.33
- Metal Eq. Unit
- % Cu-Eq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-24T00:00:00.000Z
Reasoning: Expanded from assay table. 27 g/t silver is below against the default band [500, 200, 100, 30] g/t. Grade×width 27.0 g/t·m is below.
Negative factors
- 27 g/t silver is below the weak threshold (30 g/t) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“27”
Context: TABLE 2 · DDH WD-26-14 CERTIFIED ASSAYS
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
WD-26-14Wedge · goldGrade: 0.778Grade Unit: g/tIntercept: 1 mView all detailsHide details
Identity
- Hole ID
- WD-26-14
- Project
- Wedge
- Commodity
- gold
- Region
- canada_nb
- Reported Region
- canada_nb
- Ticker
- NINE.CN
Geometry
- Grade
- 0.778
- Grade Unit
- g/t
- Intercept
- 1 m
- From
- 109.5 m
- To
- 110.5 m
- Hole Depth
- 158 m
- Intercept Depth
- 109.5 m
Classification
- Deposit Type
- vms
- Sample Type
- drill
- Group ID
- WD-26-14:109.5-110.5
- Mining Method
- underground
Location
- Azimuth
- 295 °
- Dip
- -65 °
QA/QC
- Laboratory
- ALS Global
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Metal Eq. Grade
- 2.33
- Metal Eq. Unit
- % Cu-Eq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-24T00:00:00.000Z
Reasoning: Expanded from assay table. 0.778 g/t gold is below against the underground mining band [15, 7, 4, 2.5] g/t. Grade×width 0.8 g/t·m is below.
Negative factors
- 0.778 g/t gold is below the weak threshold (2.5 g/t) on the underground mining band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.778”
Context: TABLE 2 · DDH WD-26-14 CERTIFIED ASSAYS
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
WD-26-14Wedge · leadGrade: 0.16Grade Unit: %Intercept: 1 mView all detailsHide details
Identity
- Hole ID
- WD-26-14
- Project
- Wedge
- Commodity
- lead
- Region
- canada_nb
- Reported Region
- canada_nb
- Ticker
- NINE.CN
Geometry
- Grade
- 0.16
- Grade Unit
- %
- Intercept
- 1 m
- From
- 109.5 m
- To
- 110.5 m
- Hole Depth
- 158 m
- Intercept Depth
- 109.5 m
Classification
- Deposit Type
- vms
- Sample Type
- drill
- Group ID
- WD-26-14:109.5-110.5
- Mining Method
- underground
Location
- Azimuth
- 295 °
- Dip
- -65 °
QA/QC
- Laboratory
- ALS Global
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Metal Eq. Grade
- 2.33
- Metal Eq. Unit
- % Cu-Eq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-24T00:00:00.000Z
Reasoning: Expanded from assay table. 0.16 % lead is below against the default band [10, 6, 3, 1] %. Grade×width 0.2 %·m is below.
Negative factors
- 0.16 % lead is below the weak threshold (1 %) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.16”
Context: TABLE 2 · DDH WD-26-14 CERTIFIED ASSAYS
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
WD-26-14Wedge · zincGrade: 0.13Grade Unit: %Intercept: 1 mView all detailsHide details
Identity
- Hole ID
- WD-26-14
- Project
- Wedge
- Commodity
- zinc
- Region
- canada_nb
- Reported Region
- canada_nb
- Ticker
- NINE.CN
Geometry
- Grade
- 0.13
- Grade Unit
- %
- Intercept
- 1 m
- From
- 109.5 m
- To
- 110.5 m
- Hole Depth
- 158 m
- Intercept Depth
- 109.5 m
Classification
- Deposit Type
- vms
- Sample Type
- drill
- Group ID
- WD-26-14:109.5-110.5
- Mining Method
- underground
Location
- Azimuth
- 295 °
- Dip
- -65 °
QA/QC
- Laboratory
- ALS Global
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Metal Eq. Grade
- 2.33
- Metal Eq. Unit
- % Cu-Eq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-24T00:00:00.000Z
Reasoning: Expanded from assay table. 0.13 % zinc is below against the default band [18, 10, 5, 2] %. Grade×width 0.1 %·m is below.
Negative factors
- 0.13 % zinc is below the weak threshold (2 %) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.13”
Context: TABLE 2 · DDH WD-26-14 CERTIFIED ASSAYS
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
WD-26-14Wedge · silverGrade: 51Grade Unit: g/tIntercept: 1 mView all detailsHide details
Identity
- Hole ID
- WD-26-14
- Project
- Wedge
- Commodity
- silver
- Region
- canada_nb
- Reported Region
- canada_nb
- Ticker
- NINE.CN
Geometry
- Grade
- 51
- Grade Unit
- g/t
- Intercept
- 1 m
- From
- 110.5 m
- To
- 111.5 m
- Hole Depth
- 158 m
- Intercept Depth
- 110.5 m
Classification
- Deposit Type
- vms
- Sample Type
- drill
- Group ID
- WD-26-14:110.5-111.5
- Mining Method
- underground
Location
- Azimuth
- 295 °
- Dip
- -65 °
QA/QC
- Laboratory
- ALS Global
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Metal Eq. Grade
- 4.4
- Metal Eq. Unit
- % Cu-Eq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-24T00:00:00.000Z
Reasoning: Expanded from assay table. 51 g/t silver is weak against the default band [500, 200, 100, 30] g/t. Grade×width 51.0 g/t·m is below (grade alone is weak; the better of the two is used).
Negative factors
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“51”
Context: TABLE 2 · DDH WD-26-14 CERTIFIED ASSAYS
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
WD-26-14Wedge · goldGrade: 0.672Grade Unit: g/tIntercept: 1 mView all detailsHide details
Identity
- Hole ID
- WD-26-14
- Project
- Wedge
- Commodity
- gold
- Region
- canada_nb
- Reported Region
- canada_nb
- Ticker
- NINE.CN
Geometry
- Grade
- 0.672
- Grade Unit
- g/t
- Intercept
- 1 m
- From
- 110.5 m
- To
- 111.5 m
- Hole Depth
- 158 m
- Intercept Depth
- 110.5 m
Classification
- Deposit Type
- vms
- Sample Type
- drill
- Group ID
- WD-26-14:110.5-111.5
- Mining Method
- underground
Location
- Azimuth
- 295 °
- Dip
- -65 °
QA/QC
- Laboratory
- ALS Global
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Metal Eq. Grade
- 4.4
- Metal Eq. Unit
- % Cu-Eq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-24T00:00:00.000Z
Reasoning: Expanded from assay table. 0.672 g/t gold is below against the underground mining band [15, 7, 4, 2.5] g/t. Grade×width 0.7 g/t·m is below.
Negative factors
- 0.672 g/t gold is below the weak threshold (2.5 g/t) on the underground mining band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.672”
Context: TABLE 2 · DDH WD-26-14 CERTIFIED ASSAYS
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
WD-26-14Wedge · leadGrade: 1.28Grade Unit: %Intercept: 1 mView all detailsHide details
Identity
- Hole ID
- WD-26-14
- Project
- Wedge
- Commodity
- lead
- Region
- canada_nb
- Reported Region
- canada_nb
- Ticker
- NINE.CN
Geometry
- Grade
- 1.28
- Grade Unit
- %
- Intercept
- 1 m
- From
- 110.5 m
- To
- 111.5 m
- Hole Depth
- 158 m
- Intercept Depth
- 110.5 m
Classification
- Deposit Type
- vms
- Sample Type
- drill
- Group ID
- WD-26-14:110.5-111.5
- Mining Method
- underground
Location
- Azimuth
- 295 °
- Dip
- -65 °
QA/QC
- Laboratory
- ALS Global
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Metal Eq. Grade
- 4.4
- Metal Eq. Unit
- % Cu-Eq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-24T00:00:00.000Z
Reasoning: Expanded from assay table. 1.28 % lead is weak against the default band [10, 6, 3, 1] %. Grade×width 1.3 %·m is below (grade alone is weak; the better of the two is used).
Negative factors
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“1.28”
Context: TABLE 2 · DDH WD-26-14 CERTIFIED ASSAYS
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
WD-26-14Wedge · zincGrade: 5.12Grade Unit: %Intercept: 1 mView all detailsHide details
Identity
- Hole ID
- WD-26-14
- Project
- Wedge
- Commodity
- zinc
- Region
- canada_nb
- Reported Region
- canada_nb
- Ticker
- NINE.CN
Geometry
- Grade
- 5.12
- Grade Unit
- %
- Intercept
- 1 m
- From
- 110.5 m
- To
- 111.5 m
- Hole Depth
- 158 m
- Intercept Depth
- 110.5 m
Classification
- Deposit Type
- vms
- Sample Type
- drill
- Group ID
- WD-26-14:110.5-111.5
- Mining Method
- underground
Location
- Azimuth
- 295 °
- Dip
- -65 °
QA/QC
- Laboratory
- ALS Global
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Metal Eq. Grade
- 4.4
- Metal Eq. Unit
- % Cu-Eq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-24T00:00:00.000Z
Reasoning: Expanded from assay table. 5.12 % zinc is moderate against the default band [18, 10, 5, 2] %. Grade×width 5.1 %·m is below (grade alone is moderate; the better of the two is used).
Negative factors
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“5.12”
Context: TABLE 2 · DDH WD-26-14 CERTIFIED ASSAYS
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
WD-26-14Wedge · silverGrade: 38Grade Unit: g/tIntercept: 1 mView all detailsHide details
Identity
- Hole ID
- WD-26-14
- Project
- Wedge
- Commodity
- silver
- Region
- canada_nb
- Reported Region
- canada_nb
- Ticker
- NINE.CN
Geometry
- Grade
- 38
- Grade Unit
- g/t
- Intercept
- 1 m
- From
- 111.5 m
- To
- 112.5 m
- Hole Depth
- 158 m
- Intercept Depth
- 111.5 m
Classification
- Deposit Type
- vms
- Sample Type
- drill
- Group ID
- WD-26-14:111.5-112.5
- Mining Method
- underground
Location
- Azimuth
- 295 °
- Dip
- -65 °
QA/QC
- Laboratory
- ALS Global
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Metal Eq. Grade
- 3.59
- Metal Eq. Unit
- % Cu-Eq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-24T00:00:00.000Z
Reasoning: Expanded from assay table. 38 g/t silver is weak against the default band [500, 200, 100, 30] g/t. Grade×width 38.0 g/t·m is below (grade alone is weak; the better of the two is used).
Negative factors
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“38”
Context: TABLE 2 · DDH WD-26-14 CERTIFIED ASSAYS
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
WD-26-14Wedge · goldGrade: 0.753Grade Unit: g/tIntercept: 1 mView all detailsHide details
Identity
- Hole ID
- WD-26-14
- Project
- Wedge
- Commodity
- gold
- Region
- canada_nb
- Reported Region
- canada_nb
- Ticker
- NINE.CN
Geometry
- Grade
- 0.753
- Grade Unit
- g/t
- Intercept
- 1 m
- From
- 111.5 m
- To
- 112.5 m
- Hole Depth
- 158 m
- Intercept Depth
- 111.5 m
Classification
- Deposit Type
- vms
- Sample Type
- drill
- Group ID
- WD-26-14:111.5-112.5
- Mining Method
- underground
Location
- Azimuth
- 295 °
- Dip
- -65 °
QA/QC
- Laboratory
- ALS Global
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Metal Eq. Grade
- 3.59
- Metal Eq. Unit
- % Cu-Eq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-24T00:00:00.000Z
Reasoning: Expanded from assay table. 0.753 g/t gold is below against the underground mining band [15, 7, 4, 2.5] g/t. Grade×width 0.8 g/t·m is below.
Negative factors
- 0.753 g/t gold is below the weak threshold (2.5 g/t) on the underground mining band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.753”
Context: TABLE 2 · DDH WD-26-14 CERTIFIED ASSAYS
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
WD-26-14Wedge · leadGrade: 0.94Grade Unit: %Intercept: 1 mView all detailsHide details
Identity
- Hole ID
- WD-26-14
- Project
- Wedge
- Commodity
- lead
- Region
- canada_nb
- Reported Region
- canada_nb
- Ticker
- NINE.CN
Geometry
- Grade
- 0.94
- Grade Unit
- %
- Intercept
- 1 m
- From
- 111.5 m
- To
- 112.5 m
- Hole Depth
- 158 m
- Intercept Depth
- 111.5 m
Classification
- Deposit Type
- vms
- Sample Type
- drill
- Group ID
- WD-26-14:111.5-112.5
- Mining Method
- underground
Location
- Azimuth
- 295 °
- Dip
- -65 °
QA/QC
- Laboratory
- ALS Global
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Metal Eq. Grade
- 3.59
- Metal Eq. Unit
- % Cu-Eq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-24T00:00:00.000Z
Reasoning: Expanded from assay table. 0.94 % lead is below against the default band [10, 6, 3, 1] %. Grade×width 0.9 %·m is below.
Negative factors
- 0.94 % lead is below the weak threshold (1 %) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.94”
Context: TABLE 2 · DDH WD-26-14 CERTIFIED ASSAYS
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
WD-26-14Wedge · zincGrade: 1.7Grade Unit: %Intercept: 1 mView all detailsHide details
Identity
- Hole ID
- WD-26-14
- Project
- Wedge
- Commodity
- zinc
- Region
- canada_nb
- Reported Region
- canada_nb
- Ticker
- NINE.CN
Geometry
- Grade
- 1.7
- Grade Unit
- %
- Intercept
- 1 m
- From
- 111.5 m
- To
- 112.5 m
- Hole Depth
- 158 m
- Intercept Depth
- 111.5 m
Classification
- Deposit Type
- vms
- Sample Type
- drill
- Group ID
- WD-26-14:111.5-112.5
- Mining Method
- underground
Location
- Azimuth
- 295 °
- Dip
- -65 °
QA/QC
- Laboratory
- ALS Global
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Metal Eq. Grade
- 3.59
- Metal Eq. Unit
- % Cu-Eq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-24T00:00:00.000Z
Reasoning: Expanded from assay table. 1.7 % zinc is below against the default band [18, 10, 5, 2] %. Grade×width 1.7 %·m is below.
Negative factors
- 1.7 % zinc is below the weak threshold (2 %) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“1.70”
Context: TABLE 2 · DDH WD-26-14 CERTIFIED ASSAYS
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
WD-26-14Wedge · silverGrade: 62Grade Unit: g/tIntercept: 1 mView all detailsHide details
Identity
- Hole ID
- WD-26-14
- Project
- Wedge
- Commodity
- silver
- Region
- canada_nb
- Reported Region
- canada_nb
- Ticker
- NINE.CN
Geometry
- Grade
- 62
- Grade Unit
- g/t
- Intercept
- 1 m
- From
- 112.5 m
- To
- 113.5 m
- Hole Depth
- 158 m
- Intercept Depth
- 112.5 m
Classification
- Deposit Type
- vms
- Sample Type
- drill
- Group ID
- WD-26-14:112.5-113.5
- Mining Method
- underground
Location
- Azimuth
- 295 °
- Dip
- -65 °
QA/QC
- Laboratory
- ALS Global
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Metal Eq. Grade
- 5.19
- Metal Eq. Unit
- % Cu-Eq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-24T00:00:00.000Z
Reasoning: Expanded from assay table. 62 g/t silver is weak against the default band [500, 200, 100, 30] g/t. Grade×width 62.0 g/t·m is below (grade alone is weak; the better of the two is used).
Negative factors
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“62”
Context: TABLE 2 · DDH WD-26-14 CERTIFIED ASSAYS
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
WD-26-14Wedge · goldGrade: 1.075Grade Unit: g/tIntercept: 1 mView all detailsHide details
Identity
- Hole ID
- WD-26-14
- Project
- Wedge
- Commodity
- gold
- Region
- canada_nb
- Reported Region
- canada_nb
- Ticker
- NINE.CN
Geometry
- Grade
- 1.075
- Grade Unit
- g/t
- Intercept
- 1 m
- From
- 112.5 m
- To
- 113.5 m
- Hole Depth
- 158 m
- Intercept Depth
- 112.5 m
Classification
- Deposit Type
- vms
- Sample Type
- drill
- Group ID
- WD-26-14:112.5-113.5
- Mining Method
- underground
Location
- Azimuth
- 295 °
- Dip
- -65 °
QA/QC
- Laboratory
- ALS Global
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Metal Eq. Grade
- 5.19
- Metal Eq. Unit
- % Cu-Eq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-24T00:00:00.000Z
Reasoning: Expanded from assay table. 1.075 g/t gold is below against the underground mining band [15, 7, 4, 2.5] g/t. Grade×width 1.1 g/t·m is below.
Negative factors
- 1.075 g/t gold is below the weak threshold (2.5 g/t) on the underground mining band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“1.075”
Context: TABLE 2 · DDH WD-26-14 CERTIFIED ASSAYS
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
WD-26-14Wedge · leadGrade: 2.14Grade Unit: %Intercept: 1 mView all detailsHide details
Identity
- Hole ID
- WD-26-14
- Project
- Wedge
- Commodity
- lead
- Region
- canada_nb
- Reported Region
- canada_nb
- Ticker
- NINE.CN
Geometry
- Grade
- 2.14
- Grade Unit
- %
- Intercept
- 1 m
- From
- 112.5 m
- To
- 113.5 m
- Hole Depth
- 158 m
- Intercept Depth
- 112.5 m
Classification
- Deposit Type
- vms
- Sample Type
- drill
- Group ID
- WD-26-14:112.5-113.5
- Mining Method
- underground
Location
- Azimuth
- 295 °
- Dip
- -65 °
QA/QC
- Laboratory
- ALS Global
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Metal Eq. Grade
- 5.19
- Metal Eq. Unit
- % Cu-Eq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-24T00:00:00.000Z
Reasoning: Expanded from assay table. 2.14 % lead is weak against the default band [10, 6, 3, 1] %. Grade×width 2.1 %·m is below (grade alone is weak; the better of the two is used).
Negative factors
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“2.14”
Context: TABLE 2 · DDH WD-26-14 CERTIFIED ASSAYS
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
WD-26-14Wedge · zincGrade: 7.25Grade Unit: %Intercept: 1 mView all detailsHide details
Identity
- Hole ID
- WD-26-14
- Project
- Wedge
- Commodity
- zinc
- Region
- canada_nb
- Reported Region
- canada_nb
- Ticker
- NINE.CN
Geometry
- Grade
- 7.25
- Grade Unit
- %
- Intercept
- 1 m
- From
- 112.5 m
- To
- 113.5 m
- Hole Depth
- 158 m
- Intercept Depth
- 112.5 m
Classification
- Deposit Type
- vms
- Sample Type
- drill
- Group ID
- WD-26-14:112.5-113.5
- Mining Method
- underground
Location
- Azimuth
- 295 °
- Dip
- -65 °
QA/QC
- Laboratory
- ALS Global
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Metal Eq. Grade
- 5.19
- Metal Eq. Unit
- % Cu-Eq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-24T00:00:00.000Z
Reasoning: Expanded from assay table. 7.25 % zinc is moderate against the default band [18, 10, 5, 2] %. Grade×width 7.3 %·m is below (grade alone is moderate; the better of the two is used).
Negative factors
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“7.25”
Context: TABLE 2 · DDH WD-26-14 CERTIFIED ASSAYS
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
WD-26-14Wedge · silverGrade: 39Grade Unit: g/tIntercept: 1 mView all detailsHide details
Identity
- Hole ID
- WD-26-14
- Project
- Wedge
- Commodity
- silver
- Region
- canada_nb
- Reported Region
- canada_nb
- Ticker
- NINE.CN
Geometry
- Grade
- 39
- Grade Unit
- g/t
- Intercept
- 1 m
- From
- 113.5 m
- To
- 114.5 m
- Hole Depth
- 158 m
- Intercept Depth
- 113.5 m
Classification
- Deposit Type
- vms
- Sample Type
- drill
- Group ID
- WD-26-14:113.5-114.5
- Mining Method
- underground
Location
- Azimuth
- 295 °
- Dip
- -65 °
QA/QC
- Laboratory
- ALS Global
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Metal Eq. Grade
- 3.41
- Metal Eq. Unit
- % Cu-Eq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-24T00:00:00.000Z
Reasoning: Expanded from assay table. 39 g/t silver is weak against the default band [500, 200, 100, 30] g/t. Grade×width 39.0 g/t·m is below (grade alone is weak; the better of the two is used).
Negative factors
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“39”
Context: TABLE 2 · DDH WD-26-14 CERTIFIED ASSAYS
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
WD-26-14Wedge · goldGrade: 0.842Grade Unit: g/tIntercept: 1 mView all detailsHide details
Identity
- Hole ID
- WD-26-14
- Project
- Wedge
- Commodity
- gold
- Region
- canada_nb
- Reported Region
- canada_nb
- Ticker
- NINE.CN
Geometry
- Grade
- 0.842
- Grade Unit
- g/t
- Intercept
- 1 m
- From
- 113.5 m
- To
- 114.5 m
- Hole Depth
- 158 m
- Intercept Depth
- 113.5 m
Classification
- Deposit Type
- vms
- Sample Type
- drill
- Group ID
- WD-26-14:113.5-114.5
- Mining Method
- underground
Location
- Azimuth
- 295 °
- Dip
- -65 °
QA/QC
- Laboratory
- ALS Global
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Metal Eq. Grade
- 3.41
- Metal Eq. Unit
- % Cu-Eq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-24T00:00:00.000Z
Reasoning: Expanded from assay table. 0.842 g/t gold is below against the underground mining band [15, 7, 4, 2.5] g/t. Grade×width 0.8 g/t·m is below.
Negative factors
- 0.842 g/t gold is below the weak threshold (2.5 g/t) on the underground mining band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.842”
Context: TABLE 2 · DDH WD-26-14 CERTIFIED ASSAYS
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
WD-26-14Wedge · leadGrade: 0.7Grade Unit: %Intercept: 1 mView all detailsHide details
Identity
- Hole ID
- WD-26-14
- Project
- Wedge
- Commodity
- lead
- Region
- canada_nb
- Reported Region
- canada_nb
- Ticker
- NINE.CN
Geometry
- Grade
- 0.7
- Grade Unit
- %
- Intercept
- 1 m
- From
- 113.5 m
- To
- 114.5 m
- Hole Depth
- 158 m
- Intercept Depth
- 113.5 m
Classification
- Deposit Type
- vms
- Sample Type
- drill
- Group ID
- WD-26-14:113.5-114.5
- Mining Method
- underground
Location
- Azimuth
- 295 °
- Dip
- -65 °
QA/QC
- Laboratory
- ALS Global
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Metal Eq. Grade
- 3.41
- Metal Eq. Unit
- % Cu-Eq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-24T00:00:00.000Z
Reasoning: Expanded from assay table. 0.7 % lead is below against the default band [10, 6, 3, 1] %. Grade×width 0.7 %·m is below.
Negative factors
- 0.7 % lead is below the weak threshold (1 %) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.70”
Context: TABLE 2 · DDH WD-26-14 CERTIFIED ASSAYS
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
WD-26-14Wedge · zincGrade: 2.68Grade Unit: %Intercept: 1 mView all detailsHide details
Identity
- Hole ID
- WD-26-14
- Project
- Wedge
- Commodity
- zinc
- Region
- canada_nb
- Reported Region
- canada_nb
- Ticker
- NINE.CN
Geometry
- Grade
- 2.68
- Grade Unit
- %
- Intercept
- 1 m
- From
- 113.5 m
- To
- 114.5 m
- Hole Depth
- 158 m
- Intercept Depth
- 113.5 m
Classification
- Deposit Type
- vms
- Sample Type
- drill
- Group ID
- WD-26-14:113.5-114.5
- Mining Method
- underground
Location
- Azimuth
- 295 °
- Dip
- -65 °
QA/QC
- Laboratory
- ALS Global
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Metal Eq. Grade
- 3.41
- Metal Eq. Unit
- % Cu-Eq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-24T00:00:00.000Z
Reasoning: Expanded from assay table. 2.68 % zinc is weak against the default band [18, 10, 5, 2] %. Grade×width 2.7 %·m is below (grade alone is weak; the better of the two is used).
Negative factors
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“2.68”
Context: TABLE 2 · DDH WD-26-14 CERTIFIED ASSAYS
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
WD-26-14Wedge · silverGrade: 23Grade Unit: g/tIntercept: 1 mView all detailsHide details
Identity
- Hole ID
- WD-26-14
- Project
- Wedge
- Commodity
- silver
- Region
- canada_nb
- Reported Region
- canada_nb
- Ticker
- NINE.CN
Geometry
- Grade
- 23
- Grade Unit
- g/t
- Intercept
- 1 m
- From
- 114.5 m
- To
- 115.5 m
- Hole Depth
- 158 m
- Intercept Depth
- 114.5 m
Classification
- Deposit Type
- vms
- Sample Type
- drill
- Group ID
- WD-26-14:114.5-115.5
- Mining Method
- underground
Location
- Azimuth
- 295 °
- Dip
- -65 °
QA/QC
- Laboratory
- ALS Global
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Metal Eq. Grade
- 3.88
- Metal Eq. Unit
- % Cu-Eq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-24T00:00:00.000Z
Reasoning: Expanded from assay table. 23 g/t silver is below against the default band [500, 200, 100, 30] g/t. Grade×width 23.0 g/t·m is below.
Negative factors
- 23 g/t silver is below the weak threshold (30 g/t) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“23”
Context: TABLE 2 · DDH WD-26-14 CERTIFIED ASSAYS
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
WD-26-14Wedge · goldGrade: 0.767Grade Unit: g/tIntercept: 1 mView all detailsHide details
Identity
- Hole ID
- WD-26-14
- Project
- Wedge
- Commodity
- gold
- Region
- canada_nb
- Reported Region
- canada_nb
- Ticker
- NINE.CN
Geometry
- Grade
- 0.767
- Grade Unit
- g/t
- Intercept
- 1 m
- From
- 114.5 m
- To
- 115.5 m
- Hole Depth
- 158 m
- Intercept Depth
- 114.5 m
Classification
- Deposit Type
- vms
- Sample Type
- drill
- Group ID
- WD-26-14:114.5-115.5
- Mining Method
- underground
Location
- Azimuth
- 295 °
- Dip
- -65 °
QA/QC
- Laboratory
- ALS Global
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Metal Eq. Grade
- 3.88
- Metal Eq. Unit
- % Cu-Eq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-24T00:00:00.000Z
Reasoning: Expanded from assay table. 0.767 g/t gold is below against the underground mining band [15, 7, 4, 2.5] g/t. Grade×width 0.8 g/t·m is below.
Negative factors
- 0.767 g/t gold is below the weak threshold (2.5 g/t) on the underground mining band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.767”
Context: TABLE 2 · DDH WD-26-14 CERTIFIED ASSAYS
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
WD-26-14Wedge · leadGrade: 0.53Grade Unit: %Intercept: 1 mView all detailsHide details
Identity
- Hole ID
- WD-26-14
- Project
- Wedge
- Commodity
- lead
- Region
- canada_nb
- Reported Region
- canada_nb
- Ticker
- NINE.CN
Geometry
- Grade
- 0.53
- Grade Unit
- %
- Intercept
- 1 m
- From
- 114.5 m
- To
- 115.5 m
- Hole Depth
- 158 m
- Intercept Depth
- 114.5 m
Classification
- Deposit Type
- vms
- Sample Type
- drill
- Group ID
- WD-26-14:114.5-115.5
- Mining Method
- underground
Location
- Azimuth
- 295 °
- Dip
- -65 °
QA/QC
- Laboratory
- ALS Global
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Metal Eq. Grade
- 3.88
- Metal Eq. Unit
- % Cu-Eq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-24T00:00:00.000Z
Reasoning: Expanded from assay table. 0.53 % lead is below against the default band [10, 6, 3, 1] %. Grade×width 0.5 %·m is below.
Negative factors
- 0.53 % lead is below the weak threshold (1 %) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.53”
Context: TABLE 2 · DDH WD-26-14 CERTIFIED ASSAYS
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
WD-26-14Wedge · zincGrade: 4.75Grade Unit: %Intercept: 1 mView all detailsHide details
Identity
- Hole ID
- WD-26-14
- Project
- Wedge
- Commodity
- zinc
- Region
- canada_nb
- Reported Region
- canada_nb
- Ticker
- NINE.CN
Geometry
- Grade
- 4.75
- Grade Unit
- %
- Intercept
- 1 m
- From
- 114.5 m
- To
- 115.5 m
- Hole Depth
- 158 m
- Intercept Depth
- 114.5 m
Classification
- Deposit Type
- vms
- Sample Type
- drill
- Group ID
- WD-26-14:114.5-115.5
- Mining Method
- underground
Location
- Azimuth
- 295 °
- Dip
- -65 °
QA/QC
- Laboratory
- ALS Global
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Metal Eq. Grade
- 3.88
- Metal Eq. Unit
- % Cu-Eq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-24T00:00:00.000Z
Reasoning: Expanded from assay table. 4.75 % zinc is weak against the default band [18, 10, 5, 2] %. Grade×width 4.8 %·m is below (grade alone is weak; the better of the two is used).
Negative factors
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“4.75”
Context: TABLE 2 · DDH WD-26-14 CERTIFIED ASSAYS
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
WD-26-14Wedge · silverGrade: 38Grade Unit: g/tIntercept: 1 mView all detailsHide details
Identity
- Hole ID
- WD-26-14
- Project
- Wedge
- Commodity
- silver
- Region
- canada_nb
- Reported Region
- canada_nb
- Ticker
- NINE.CN
Geometry
- Grade
- 38
- Grade Unit
- g/t
- Intercept
- 1 m
- From
- 115.5 m
- To
- 116.5 m
- Hole Depth
- 158 m
- Intercept Depth
- 115.5 m
Classification
- Deposit Type
- vms
- Sample Type
- drill
- Group ID
- WD-26-14:115.5-116.5
- Mining Method
- underground
Location
- Azimuth
- 295 °
- Dip
- -65 °
QA/QC
- Laboratory
- ALS Global
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Metal Eq. Grade
- 6.26
- Metal Eq. Unit
- % Cu-Eq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-24T00:00:00.000Z
Reasoning: Expanded from assay table. 38 g/t silver is weak against the default band [500, 200, 100, 30] g/t. Grade×width 38.0 g/t·m is below (grade alone is weak; the better of the two is used).
Negative factors
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“38”
Context: TABLE 2 · DDH WD-26-14 CERTIFIED ASSAYS
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
WD-26-14Wedge · goldGrade: 0.92Grade Unit: g/tIntercept: 1 mView all detailsHide details
Identity
- Hole ID
- WD-26-14
- Project
- Wedge
- Commodity
- gold
- Region
- canada_nb
- Reported Region
- canada_nb
- Ticker
- NINE.CN
Geometry
- Grade
- 0.92
- Grade Unit
- g/t
- Intercept
- 1 m
- From
- 115.5 m
- To
- 116.5 m
- Hole Depth
- 158 m
- Intercept Depth
- 115.5 m
Classification
- Deposit Type
- vms
- Sample Type
- drill
- Group ID
- WD-26-14:115.5-116.5
- Mining Method
- underground
Location
- Azimuth
- 295 °
- Dip
- -65 °
QA/QC
- Laboratory
- ALS Global
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Metal Eq. Grade
- 6.26
- Metal Eq. Unit
- % Cu-Eq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-24T00:00:00.000Z
Reasoning: Expanded from assay table. 0.92 g/t gold is below against the underground mining band [15, 7, 4, 2.5] g/t. Grade×width 0.9 g/t·m is below.
Negative factors
- 0.92 g/t gold is below the weak threshold (2.5 g/t) on the underground mining band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.92”
Context: TABLE 2 · DDH WD-26-14 CERTIFIED ASSAYS
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
WD-26-14Wedge · leadGrade: 1.4Grade Unit: %Intercept: 1 mView all detailsHide details
Identity
- Hole ID
- WD-26-14
- Project
- Wedge
- Commodity
- lead
- Region
- canada_nb
- Reported Region
- canada_nb
- Ticker
- NINE.CN
Geometry
- Grade
- 1.4
- Grade Unit
- %
- Intercept
- 1 m
- From
- 115.5 m
- To
- 116.5 m
- Hole Depth
- 158 m
- Intercept Depth
- 115.5 m
Classification
- Deposit Type
- vms
- Sample Type
- drill
- Group ID
- WD-26-14:115.5-116.5
- Mining Method
- underground
Location
- Azimuth
- 295 °
- Dip
- -65 °
QA/QC
- Laboratory
- ALS Global
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Metal Eq. Grade
- 6.26
- Metal Eq. Unit
- % Cu-Eq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-24T00:00:00.000Z
Reasoning: Expanded from assay table. 1.4 % lead is weak against the default band [10, 6, 3, 1] %. Grade×width 1.4 %·m is below (grade alone is weak; the better of the two is used).
Negative factors
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“1.40”
Context: TABLE 2 · DDH WD-26-14 CERTIFIED ASSAYS
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
WD-26-14Wedge · zincGrade: 8.32Grade Unit: %Intercept: 1 mView all detailsHide details
Identity
- Hole ID
- WD-26-14
- Project
- Wedge
- Commodity
- zinc
- Region
- canada_nb
- Reported Region
- canada_nb
- Ticker
- NINE.CN
Geometry
- Grade
- 8.32
- Grade Unit
- %
- Intercept
- 1 m
- From
- 115.5 m
- To
- 116.5 m
- Hole Depth
- 158 m
- Intercept Depth
- 115.5 m
Classification
- Deposit Type
- vms
- Sample Type
- drill
- Group ID
- WD-26-14:115.5-116.5
- Mining Method
- underground
Location
- Azimuth
- 295 °
- Dip
- -65 °
QA/QC
- Laboratory
- ALS Global
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Metal Eq. Grade
- 6.26
- Metal Eq. Unit
- % Cu-Eq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-24T00:00:00.000Z
Reasoning: Expanded from assay table. 8.32 % zinc is moderate against the default band [18, 10, 5, 2] %. Grade×width 8.3 %·m is below (grade alone is moderate; the better of the two is used).
Negative factors
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“8.32”
Context: TABLE 2 · DDH WD-26-14 CERTIFIED ASSAYS
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
WD-26-14Wedge · silverGrade: 56Grade Unit: g/tIntercept: 1 mView all detailsHide details
Identity
- Hole ID
- WD-26-14
- Project
- Wedge
- Commodity
- silver
- Region
- canada_nb
- Reported Region
- canada_nb
- Ticker
- NINE.CN
Geometry
- Grade
- 56
- Grade Unit
- g/t
- Intercept
- 1 m
- From
- 116.5 m
- To
- 117.5 m
- Hole Depth
- 158 m
- Intercept Depth
- 116.5 m
Classification
- Deposit Type
- vms
- Sample Type
- drill
- Group ID
- WD-26-14:116.5-117.5
- Mining Method
- underground
Location
- Azimuth
- 295 °
- Dip
- -65 °
QA/QC
- Laboratory
- ALS Global
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Metal Eq. Grade
- 7.29
- Metal Eq. Unit
- % Cu-Eq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-24T00:00:00.000Z
Reasoning: Expanded from assay table. 56 g/t silver is weak against the default band [500, 200, 100, 30] g/t. Grade×width 56.0 g/t·m is below (grade alone is weak; the better of the two is used).
Negative factors
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“56”
Context: TABLE 2 · DDH WD-26-14 CERTIFIED ASSAYS
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
WD-26-14Wedge · goldGrade: 0.844Grade Unit: g/tIntercept: 1 mView all detailsHide details
Identity
- Hole ID
- WD-26-14
- Project
- Wedge
- Commodity
- gold
- Region
- canada_nb
- Reported Region
- canada_nb
- Ticker
- NINE.CN
Geometry
- Grade
- 0.844
- Grade Unit
- g/t
- Intercept
- 1 m
- From
- 116.5 m
- To
- 117.5 m
- Hole Depth
- 158 m
- Intercept Depth
- 116.5 m
Classification
- Deposit Type
- vms
- Sample Type
- drill
- Group ID
- WD-26-14:116.5-117.5
- Mining Method
- underground
Location
- Azimuth
- 295 °
- Dip
- -65 °
QA/QC
- Laboratory
- ALS Global
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Metal Eq. Grade
- 7.29
- Metal Eq. Unit
- % Cu-Eq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-24T00:00:00.000Z
Reasoning: Expanded from assay table. 0.844 g/t gold is below against the underground mining band [15, 7, 4, 2.5] g/t. Grade×width 0.8 g/t·m is below.
Negative factors
- 0.844 g/t gold is below the weak threshold (2.5 g/t) on the underground mining band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.844”
Context: TABLE 2 · DDH WD-26-14 CERTIFIED ASSAYS
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
WD-26-14Wedge · leadGrade: 1.15Grade Unit: %Intercept: 1 mView all detailsHide details
Identity
- Hole ID
- WD-26-14
- Project
- Wedge
- Commodity
- lead
- Region
- canada_nb
- Reported Region
- canada_nb
- Ticker
- NINE.CN
Geometry
- Grade
- 1.15
- Grade Unit
- %
- Intercept
- 1 m
- From
- 116.5 m
- To
- 117.5 m
- Hole Depth
- 158 m
- Intercept Depth
- 116.5 m
Classification
- Deposit Type
- vms
- Sample Type
- drill
- Group ID
- WD-26-14:116.5-117.5
- Mining Method
- underground
Location
- Azimuth
- 295 °
- Dip
- -65 °
QA/QC
- Laboratory
- ALS Global
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Metal Eq. Grade
- 7.29
- Metal Eq. Unit
- % Cu-Eq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-24T00:00:00.000Z
Reasoning: Expanded from assay table. 1.15 % lead is weak against the default band [10, 6, 3, 1] %. Grade×width 1.1 %·m is below (grade alone is weak; the better of the two is used).
Negative factors
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“1.15”
Context: TABLE 2 · DDH WD-26-14 CERTIFIED ASSAYS
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
WD-26-14Wedge · zincGrade: 8.55Grade Unit: %Intercept: 1 mView all detailsHide details
Identity
- Hole ID
- WD-26-14
- Project
- Wedge
- Commodity
- zinc
- Region
- canada_nb
- Reported Region
- canada_nb
- Ticker
- NINE.CN
Geometry
- Grade
- 8.55
- Grade Unit
- %
- Intercept
- 1 m
- From
- 116.5 m
- To
- 117.5 m
- Hole Depth
- 158 m
- Intercept Depth
- 116.5 m
Classification
- Deposit Type
- vms
- Sample Type
- drill
- Group ID
- WD-26-14:116.5-117.5
- Mining Method
- underground
Location
- Azimuth
- 295 °
- Dip
- -65 °
QA/QC
- Laboratory
- ALS Global
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Metal Eq. Grade
- 7.29
- Metal Eq. Unit
- % Cu-Eq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-24T00:00:00.000Z
Reasoning: Expanded from assay table. 8.55 % zinc is moderate against the default band [18, 10, 5, 2] %. Grade×width 8.6 %·m is below (grade alone is moderate; the better of the two is used).
Negative factors
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“8.55”
Context: TABLE 2 · DDH WD-26-14 CERTIFIED ASSAYS
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
WD-26-14Wedge · silverGrade: 44Grade Unit: g/tIntercept: 1 mView all detailsHide details
Identity
- Hole ID
- WD-26-14
- Project
- Wedge
- Commodity
- silver
- Region
- canada_nb
- Reported Region
- canada_nb
- Ticker
- NINE.CN
Geometry
- Grade
- 44
- Grade Unit
- g/t
- Intercept
- 1 m
- From
- 117.5 m
- To
- 118.5 m
- Hole Depth
- 158 m
- Intercept Depth
- 117.5 m
Classification
- Deposit Type
- vms
- Sample Type
- drill
- Group ID
- WD-26-14:117.5-118.5
- Mining Method
- underground
Location
- Azimuth
- 295 °
- Dip
- -65 °
QA/QC
- Laboratory
- ALS Global
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Metal Eq. Grade
- 6.83
- Metal Eq. Unit
- % Cu-Eq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-24T00:00:00.000Z
Reasoning: Expanded from assay table. 44 g/t silver is weak against the default band [500, 200, 100, 30] g/t. Grade×width 44.0 g/t·m is below (grade alone is weak; the better of the two is used).
Negative factors
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“44”
Context: TABLE 2 · DDH WD-26-14 CERTIFIED ASSAYS
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
WD-26-14Wedge · goldGrade: 1.355Grade Unit: g/tIntercept: 1 mView all detailsHide details
Identity
- Hole ID
- WD-26-14
- Project
- Wedge
- Commodity
- gold
- Region
- canada_nb
- Reported Region
- canada_nb
- Ticker
- NINE.CN
Geometry
- Grade
- 1.355
- Grade Unit
- g/t
- Intercept
- 1 m
- From
- 117.5 m
- To
- 118.5 m
- Hole Depth
- 158 m
- Intercept Depth
- 117.5 m
Classification
- Deposit Type
- vms
- Sample Type
- drill
- Group ID
- WD-26-14:117.5-118.5
- Mining Method
- underground
Location
- Azimuth
- 295 °
- Dip
- -65 °
QA/QC
- Laboratory
- ALS Global
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Metal Eq. Grade
- 6.83
- Metal Eq. Unit
- % Cu-Eq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-24T00:00:00.000Z
Reasoning: Expanded from assay table. 1.355 g/t gold is below against the underground mining band [15, 7, 4, 2.5] g/t. Grade×width 1.4 g/t·m is below.
Negative factors
- 1.355 g/t gold is below the weak threshold (2.5 g/t) on the underground mining band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“1.355”
Context: TABLE 2 · DDH WD-26-14 CERTIFIED ASSAYS
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
WD-26-14Wedge · leadGrade: 1.15Grade Unit: %Intercept: 1 mView all detailsHide details
Identity
- Hole ID
- WD-26-14
- Project
- Wedge
- Commodity
- lead
- Region
- canada_nb
- Reported Region
- canada_nb
- Ticker
- NINE.CN
Geometry
- Grade
- 1.15
- Grade Unit
- %
- Intercept
- 1 m
- From
- 117.5 m
- To
- 118.5 m
- Hole Depth
- 158 m
- Intercept Depth
- 117.5 m
Classification
- Deposit Type
- vms
- Sample Type
- drill
- Group ID
- WD-26-14:117.5-118.5
- Mining Method
- underground
Location
- Azimuth
- 295 °
- Dip
- -65 °
QA/QC
- Laboratory
- ALS Global
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Metal Eq. Grade
- 6.83
- Metal Eq. Unit
- % Cu-Eq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-24T00:00:00.000Z
Reasoning: Expanded from assay table. 1.15 % lead is weak against the default band [10, 6, 3, 1] %. Grade×width 1.1 %·m is below (grade alone is weak; the better of the two is used).
Negative factors
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“1.15”
Context: TABLE 2 · DDH WD-26-14 CERTIFIED ASSAYS
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
WD-26-14Wedge · zincGrade: 7.13Grade Unit: %Intercept: 1 mView all detailsHide details
Identity
- Hole ID
- WD-26-14
- Project
- Wedge
- Commodity
- zinc
- Region
- canada_nb
- Reported Region
- canada_nb
- Ticker
- NINE.CN
Geometry
- Grade
- 7.13
- Grade Unit
- %
- Intercept
- 1 m
- From
- 117.5 m
- To
- 118.5 m
- Hole Depth
- 158 m
- Intercept Depth
- 117.5 m
Classification
- Deposit Type
- vms
- Sample Type
- drill
- Group ID
- WD-26-14:117.5-118.5
- Mining Method
- underground
Location
- Azimuth
- 295 °
- Dip
- -65 °
QA/QC
- Laboratory
- ALS Global
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Metal Eq. Grade
- 6.83
- Metal Eq. Unit
- % Cu-Eq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-24T00:00:00.000Z
Reasoning: Expanded from assay table. 7.13 % zinc is moderate against the default band [18, 10, 5, 2] %. Grade×width 7.1 %·m is below (grade alone is moderate; the better of the two is used).
Negative factors
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“7.13”
Context: TABLE 2 · DDH WD-26-14 CERTIFIED ASSAYS
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
WD-26-14Wedge · silverGrade: 47Grade Unit: g/tIntercept: 1 mView all detailsHide details
Identity
- Hole ID
- WD-26-14
- Project
- Wedge
- Commodity
- silver
- Region
- canada_nb
- Reported Region
- canada_nb
- Ticker
- NINE.CN
Geometry
- Grade
- 47
- Grade Unit
- g/t
- Intercept
- 1 m
- From
- 118.5 m
- To
- 119.5 m
- Hole Depth
- 158 m
- Intercept Depth
- 118.5 m
Classification
- Deposit Type
- vms
- Sample Type
- drill
- Group ID
- WD-26-14:118.5-119.5
- Mining Method
- underground
Location
- Azimuth
- 295 °
- Dip
- -65 °
QA/QC
- Laboratory
- ALS Global
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Metal Eq. Grade
- 7.42
- Metal Eq. Unit
- % Cu-Eq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-24T00:00:00.000Z
Reasoning: Expanded from assay table. 47 g/t silver is weak against the default band [500, 200, 100, 30] g/t. Grade×width 47.0 g/t·m is below (grade alone is weak; the better of the two is used).
Negative factors
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“47”
Context: TABLE 2 · DDH WD-26-14 CERTIFIED ASSAYS
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
WD-26-14Wedge · goldGrade: 0.843Grade Unit: g/tIntercept: 1 mView all detailsHide details
Identity
- Hole ID
- WD-26-14
- Project
- Wedge
- Commodity
- gold
- Region
- canada_nb
- Reported Region
- canada_nb
- Ticker
- NINE.CN
Geometry
- Grade
- 0.843
- Grade Unit
- g/t
- Intercept
- 1 m
- From
- 118.5 m
- To
- 119.5 m
- Hole Depth
- 158 m
- Intercept Depth
- 118.5 m
Classification
- Deposit Type
- vms
- Sample Type
- drill
- Group ID
- WD-26-14:118.5-119.5
- Mining Method
- underground
Location
- Azimuth
- 295 °
- Dip
- -65 °
QA/QC
- Laboratory
- ALS Global
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Metal Eq. Grade
- 7.42
- Metal Eq. Unit
- % Cu-Eq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-24T00:00:00.000Z
Reasoning: Expanded from assay table. 0.843 g/t gold is below against the underground mining band [15, 7, 4, 2.5] g/t. Grade×width 0.8 g/t·m is below.
Negative factors
- 0.843 g/t gold is below the weak threshold (2.5 g/t) on the underground mining band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.843”
Context: TABLE 2 · DDH WD-26-14 CERTIFIED ASSAYS
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
WD-26-14Wedge · leadGrade: 0.54Grade Unit: %Intercept: 1 mView all detailsHide details
Identity
- Hole ID
- WD-26-14
- Project
- Wedge
- Commodity
- lead
- Region
- canada_nb
- Reported Region
- canada_nb
- Ticker
- NINE.CN
Geometry
- Grade
- 0.54
- Grade Unit
- %
- Intercept
- 1 m
- From
- 118.5 m
- To
- 119.5 m
- Hole Depth
- 158 m
- Intercept Depth
- 118.5 m
Classification
- Deposit Type
- vms
- Sample Type
- drill
- Group ID
- WD-26-14:118.5-119.5
- Mining Method
- underground
Location
- Azimuth
- 295 °
- Dip
- -65 °
QA/QC
- Laboratory
- ALS Global
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Metal Eq. Grade
- 7.42
- Metal Eq. Unit
- % Cu-Eq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-24T00:00:00.000Z
Reasoning: Expanded from assay table. 0.54 % lead is below against the default band [10, 6, 3, 1] %. Grade×width 0.5 %·m is below.
Negative factors
- 0.54 % lead is below the weak threshold (1 %) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.54”
Context: TABLE 2 · DDH WD-26-14 CERTIFIED ASSAYS
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
WD-26-14Wedge · zincGrade: 5.44Grade Unit: %Intercept: 1 mView all detailsHide details
Identity
- Hole ID
- WD-26-14
- Project
- Wedge
- Commodity
- zinc
- Region
- canada_nb
- Reported Region
- canada_nb
- Ticker
- NINE.CN
Geometry
- Grade
- 5.44
- Grade Unit
- %
- Intercept
- 1 m
- From
- 118.5 m
- To
- 119.5 m
- Hole Depth
- 158 m
- Intercept Depth
- 118.5 m
Classification
- Deposit Type
- vms
- Sample Type
- drill
- Group ID
- WD-26-14:118.5-119.5
- Mining Method
- underground
Location
- Azimuth
- 295 °
- Dip
- -65 °
QA/QC
- Laboratory
- ALS Global
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Metal Eq. Grade
- 7.42
- Metal Eq. Unit
- % Cu-Eq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-24T00:00:00.000Z
Reasoning: Expanded from assay table. 5.44 % zinc is moderate against the default band [18, 10, 5, 2] %. Grade×width 5.4 %·m is below (grade alone is moderate; the better of the two is used).
Negative factors
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“5.44”
Context: TABLE 2 · DDH WD-26-14 CERTIFIED ASSAYS
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
WD-26-14Wedge · silverGrade: 56Grade Unit: g/tIntercept: 1 mView all detailsHide details
Identity
- Hole ID
- WD-26-14
- Project
- Wedge
- Commodity
- silver
- Region
- canada_nb
- Reported Region
- canada_nb
- Ticker
- NINE.CN
Geometry
- Grade
- 56
- Grade Unit
- g/t
- Intercept
- 1 m
- From
- 119.5 m
- To
- 120.5 m
- Hole Depth
- 158 m
- Intercept Depth
- 119.5 m
Classification
- Deposit Type
- vms
- Sample Type
- drill
- Group ID
- WD-26-14:119.5-120.5
- Mining Method
- underground
Location
- Azimuth
- 295 °
- Dip
- -65 °
QA/QC
- Laboratory
- ALS Global
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Metal Eq. Grade
- 8.31
- Metal Eq. Unit
- % Cu-Eq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-24T00:00:00.000Z
Reasoning: Expanded from assay table. 56 g/t silver is weak against the default band [500, 200, 100, 30] g/t. Grade×width 56.0 g/t·m is below (grade alone is weak; the better of the two is used).
Negative factors
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“56”
Context: TABLE 2 · DDH WD-26-14 CERTIFIED ASSAYS
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
WD-26-14Wedge · goldGrade: 1.065Grade Unit: g/tIntercept: 1 mView all detailsHide details
Identity
- Hole ID
- WD-26-14
- Project
- Wedge
- Commodity
- gold
- Region
- canada_nb
- Reported Region
- canada_nb
- Ticker
- NINE.CN
Geometry
- Grade
- 1.065
- Grade Unit
- g/t
- Intercept
- 1 m
- From
- 119.5 m
- To
- 120.5 m
- Hole Depth
- 158 m
- Intercept Depth
- 119.5 m
Classification
- Deposit Type
- vms
- Sample Type
- drill
- Group ID
- WD-26-14:119.5-120.5
- Mining Method
- underground
Location
- Azimuth
- 295 °
- Dip
- -65 °
QA/QC
- Laboratory
- ALS Global
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Metal Eq. Grade
- 8.31
- Metal Eq. Unit
- % Cu-Eq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-24T00:00:00.000Z
Reasoning: Expanded from assay table. 1.065 g/t gold is below against the underground mining band [15, 7, 4, 2.5] g/t. Grade×width 1.1 g/t·m is below.
Negative factors
- 1.065 g/t gold is below the weak threshold (2.5 g/t) on the underground mining band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“1.065”
Context: TABLE 2 · DDH WD-26-14 CERTIFIED ASSAYS
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
WD-26-14Wedge · leadGrade: 0.98Grade Unit: %Intercept: 1 mView all detailsHide details
Identity
- Hole ID
- WD-26-14
- Project
- Wedge
- Commodity
- lead
- Region
- canada_nb
- Reported Region
- canada_nb
- Ticker
- NINE.CN
Geometry
- Grade
- 0.98
- Grade Unit
- %
- Intercept
- 1 m
- From
- 119.5 m
- To
- 120.5 m
- Hole Depth
- 158 m
- Intercept Depth
- 119.5 m
Classification
- Deposit Type
- vms
- Sample Type
- drill
- Group ID
- WD-26-14:119.5-120.5
- Mining Method
- underground
Location
- Azimuth
- 295 °
- Dip
- -65 °
QA/QC
- Laboratory
- ALS Global
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Metal Eq. Grade
- 8.31
- Metal Eq. Unit
- % Cu-Eq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-24T00:00:00.000Z
Reasoning: Expanded from assay table. 0.98 % lead is below against the default band [10, 6, 3, 1] %. Grade×width 1.0 %·m is below.
Negative factors
- 0.98 % lead is below the weak threshold (1 %) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.98”
Context: TABLE 2 · DDH WD-26-14 CERTIFIED ASSAYS
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
WD-26-14Wedge · zincGrade: 5.89Grade Unit: %Intercept: 1 mView all detailsHide details
Identity
- Hole ID
- WD-26-14
- Project
- Wedge
- Commodity
- zinc
- Region
- canada_nb
- Reported Region
- canada_nb
- Ticker
- NINE.CN
Geometry
- Grade
- 5.89
- Grade Unit
- %
- Intercept
- 1 m
- From
- 119.5 m
- To
- 120.5 m
- Hole Depth
- 158 m
- Intercept Depth
- 119.5 m
Classification
- Deposit Type
- vms
- Sample Type
- drill
- Group ID
- WD-26-14:119.5-120.5
- Mining Method
- underground
Location
- Azimuth
- 295 °
- Dip
- -65 °
QA/QC
- Laboratory
- ALS Global
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Metal Eq. Grade
- 8.31
- Metal Eq. Unit
- % Cu-Eq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-24T00:00:00.000Z
Reasoning: Expanded from assay table. 5.89 % zinc is moderate against the default band [18, 10, 5, 2] %. Grade×width 5.9 %·m is below (grade alone is moderate; the better of the two is used).
Negative factors
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“5.89”
Context: TABLE 2 · DDH WD-26-14 CERTIFIED ASSAYS
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
WD-26-14Wedge · silverGrade: 55Grade Unit: g/tIntercept: 1 mView all detailsHide details
Identity
- Hole ID
- WD-26-14
- Project
- Wedge
- Commodity
- silver
- Region
- canada_nb
- Reported Region
- canada_nb
- Ticker
- NINE.CN
Geometry
- Grade
- 55
- Grade Unit
- g/t
- Intercept
- 1 m
- From
- 120.5 m
- To
- 121.5 m
- Hole Depth
- 158 m
- Intercept Depth
- 120.5 m
Classification
- Deposit Type
- vms
- Sample Type
- drill
- Group ID
- WD-26-14:120.5-121.5
- Mining Method
- underground
Location
- Azimuth
- 295 °
- Dip
- -65 °
QA/QC
- Laboratory
- ALS Global
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Metal Eq. Grade
- 8.59
- Metal Eq. Unit
- % Cu-Eq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-24T00:00:00.000Z
Reasoning: Expanded from assay table. 55 g/t silver is weak against the default band [500, 200, 100, 30] g/t. Grade×width 55.0 g/t·m is below (grade alone is weak; the better of the two is used).
Negative factors
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“55”
Context: TABLE 2 · DDH WD-26-14 CERTIFIED ASSAYS
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
WD-26-14Wedge · goldGrade: 0.829Grade Unit: g/tIntercept: 1 mView all detailsHide details
Identity
- Hole ID
- WD-26-14
- Project
- Wedge
- Commodity
- gold
- Region
- canada_nb
- Reported Region
- canada_nb
- Ticker
- NINE.CN
Geometry
- Grade
- 0.829
- Grade Unit
- g/t
- Intercept
- 1 m
- From
- 120.5 m
- To
- 121.5 m
- Hole Depth
- 158 m
- Intercept Depth
- 120.5 m
Classification
- Deposit Type
- vms
- Sample Type
- drill
- Group ID
- WD-26-14:120.5-121.5
- Mining Method
- underground
Location
- Azimuth
- 295 °
- Dip
- -65 °
QA/QC
- Laboratory
- ALS Global
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Metal Eq. Grade
- 8.59
- Metal Eq. Unit
- % Cu-Eq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-24T00:00:00.000Z
Reasoning: Expanded from assay table. 0.829 g/t gold is below against the underground mining band [15, 7, 4, 2.5] g/t. Grade×width 0.8 g/t·m is below.
Negative factors
- 0.829 g/t gold is below the weak threshold (2.5 g/t) on the underground mining band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.829”
Context: TABLE 2 · DDH WD-26-14 CERTIFIED ASSAYS
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
WD-26-14Wedge · leadGrade: 2.29Grade Unit: %Intercept: 1 mView all detailsHide details
Identity
- Hole ID
- WD-26-14
- Project
- Wedge
- Commodity
- lead
- Region
- canada_nb
- Reported Region
- canada_nb
- Ticker
- NINE.CN
Geometry
- Grade
- 2.29
- Grade Unit
- %
- Intercept
- 1 m
- From
- 120.5 m
- To
- 121.5 m
- Hole Depth
- 158 m
- Intercept Depth
- 120.5 m
Classification
- Deposit Type
- vms
- Sample Type
- drill
- Group ID
- WD-26-14:120.5-121.5
- Mining Method
- underground
Location
- Azimuth
- 295 °
- Dip
- -65 °
QA/QC
- Laboratory
- ALS Global
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Metal Eq. Grade
- 8.59
- Metal Eq. Unit
- % Cu-Eq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-24T00:00:00.000Z
Reasoning: Expanded from assay table. 2.29 % lead is weak against the default band [10, 6, 3, 1] %. Grade×width 2.3 %·m is below (grade alone is weak; the better of the two is used).
Negative factors
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“2.29”
Context: TABLE 2 · DDH WD-26-14 CERTIFIED ASSAYS
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
WD-26-14Wedge · zincGrade: 11.3Grade Unit: %Intercept: 1 mView all detailsHide details
Identity
- Hole ID
- WD-26-14
- Project
- Wedge
- Commodity
- zinc
- Region
- canada_nb
- Reported Region
- canada_nb
- Ticker
- NINE.CN
Geometry
- Grade
- 11.3
- Grade Unit
- %
- Intercept
- 1 m
- From
- 120.5 m
- To
- 121.5 m
- Hole Depth
- 158 m
- Intercept Depth
- 120.5 m
Classification
- Deposit Type
- vms
- Sample Type
- drill
- Group ID
- WD-26-14:120.5-121.5
- Mining Method
- underground
Location
- Azimuth
- 295 °
- Dip
- -65 °
QA/QC
- Laboratory
- ALS Global
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Metal Eq. Grade
- 8.59
- Metal Eq. Unit
- % Cu-Eq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-24T00:00:00.000Z
Reasoning: Expanded from assay table. 11.3 % zinc is strong against the default band [18, 10, 5, 2] %. Grade×width 11.3 %·m is below (grade alone is strong; the better of the two is used).
Positive factors
- 11.3 % zinc is strong on the default band.
Negative factors
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“11.30”
Context: TABLE 2 · DDH WD-26-14 CERTIFIED ASSAYS
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
WD-26-14Wedge · silverGrade: 2Grade Unit: g/tIntercept: 1 mView all detailsHide details
Identity
- Hole ID
- WD-26-14
- Project
- Wedge
- Commodity
- silver
- Region
- canada_nb
- Reported Region
- canada_nb
- Ticker
- NINE.CN
Geometry
- Grade
- 2
- Grade Unit
- g/t
- Intercept
- 1 m
- From
- 121.5 m
- To
- 122.5 m
- Hole Depth
- 158 m
- Intercept Depth
- 121.5 m
Classification
- Deposit Type
- vms
- Sample Type
- drill
- Group ID
- WD-26-14:121.5-122.5
- Mining Method
- underground
Location
- Azimuth
- 295 °
- Dip
- -65 °
QA/QC
- Laboratory
- ALS Global
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Metal Eq. Grade
- 0.22
- Metal Eq. Unit
- % Cu-Eq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-24T00:00:00.000Z
Reasoning: Expanded from assay table. 2 g/t silver is below against the default band [500, 200, 100, 30] g/t. Grade×width 2.0 g/t·m is below.
Negative factors
- 2 g/t silver is below the weak threshold (30 g/t) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“2”
Context: TABLE 2 · DDH WD-26-14 CERTIFIED ASSAYS
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
WD-26-14Wedge · goldGrade: 0.023Grade Unit: g/tIntercept: 1 mView all detailsHide details
Identity
- Hole ID
- WD-26-14
- Project
- Wedge
- Commodity
- gold
- Region
- canada_nb
- Reported Region
- canada_nb
- Ticker
- NINE.CN
Geometry
- Grade
- 0.023
- Grade Unit
- g/t
- Intercept
- 1 m
- From
- 121.5 m
- To
- 122.5 m
- Hole Depth
- 158 m
- Intercept Depth
- 121.5 m
Classification
- Deposit Type
- vms
- Sample Type
- drill
- Group ID
- WD-26-14:121.5-122.5
- Mining Method
- underground
Location
- Azimuth
- 295 °
- Dip
- -65 °
QA/QC
- Laboratory
- ALS Global
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Metal Eq. Grade
- 0.22
- Metal Eq. Unit
- % Cu-Eq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-24T00:00:00.000Z
Reasoning: Expanded from assay table. 0.023 g/t gold is below against the underground mining band [15, 7, 4, 2.5] g/t. Grade×width 0.0 g/t·m is below.
Negative factors
- 0.023 g/t gold is below the weak threshold (2.5 g/t) on the underground mining band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.023”
Context: TABLE 2 · DDH WD-26-14 CERTIFIED ASSAYS
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
WD-26-14Wedge · leadGrade: 0.03Grade Unit: %Intercept: 1 mView all detailsHide details
Identity
- Hole ID
- WD-26-14
- Project
- Wedge
- Commodity
- lead
- Region
- canada_nb
- Reported Region
- canada_nb
- Ticker
- NINE.CN
Geometry
- Grade
- 0.03
- Grade Unit
- %
- Intercept
- 1 m
- From
- 121.5 m
- To
- 122.5 m
- Hole Depth
- 158 m
- Intercept Depth
- 121.5 m
Classification
- Deposit Type
- vms
- Sample Type
- drill
- Group ID
- WD-26-14:121.5-122.5
- Mining Method
- underground
Location
- Azimuth
- 295 °
- Dip
- -65 °
QA/QC
- Laboratory
- ALS Global
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Metal Eq. Grade
- 0.22
- Metal Eq. Unit
- % Cu-Eq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-24T00:00:00.000Z
Reasoning: Expanded from assay table. 0.03 % lead is below against the default band [10, 6, 3, 1] %. Grade×width 0.0 %·m is below.
Negative factors
- 0.03 % lead is below the weak threshold (1 %) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.03”
Context: TABLE 2 · DDH WD-26-14 CERTIFIED ASSAYS
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
WD-26-14Wedge · zincGrade: 0.28Grade Unit: %Intercept: 1 mView all detailsHide details
Identity
- Hole ID
- WD-26-14
- Project
- Wedge
- Commodity
- zinc
- Region
- canada_nb
- Reported Region
- canada_nb
- Ticker
- NINE.CN
Geometry
- Grade
- 0.28
- Grade Unit
- %
- Intercept
- 1 m
- From
- 121.5 m
- To
- 122.5 m
- Hole Depth
- 158 m
- Intercept Depth
- 121.5 m
Classification
- Deposit Type
- vms
- Sample Type
- drill
- Group ID
- WD-26-14:121.5-122.5
- Mining Method
- underground
Location
- Azimuth
- 295 °
- Dip
- -65 °
QA/QC
- Laboratory
- ALS Global
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Metal Eq. Grade
- 0.22
- Metal Eq. Unit
- % Cu-Eq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-24T00:00:00.000Z
Reasoning: Expanded from assay table. 0.28 % zinc is below against the default band [18, 10, 5, 2] %. Grade×width 0.3 %·m is below.
Negative factors
- 0.28 % zinc is below the weak threshold (2 %) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.28”
Context: TABLE 2 · DDH WD-26-14 CERTIFIED ASSAYS
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
WD-26-14Wedge · silverGrade: 1Grade Unit: g/tIntercept: 1 mView all detailsHide details
Identity
- Hole ID
- WD-26-14
- Project
- Wedge
- Commodity
- silver
- Region
- canada_nb
- Reported Region
- canada_nb
- Ticker
- NINE.CN
Geometry
- Grade
- 1
- Grade Unit
- g/t
- Intercept
- 1 m
- From
- 122.5 m
- To
- 123.5 m
- Hole Depth
- 158 m
- Intercept Depth
- 122.5 m
Classification
- Deposit Type
- vms
- Sample Type
- drill
- Group ID
- WD-26-14:122.5-123.5
- Mining Method
- underground
Location
- Azimuth
- 295 °
- Dip
- -65 °
QA/QC
- Laboratory
- ALS Global
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Metal Eq. Grade
- 0.16
- Metal Eq. Unit
- % Cu-Eq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-24T00:00:00.000Z
Reasoning: Expanded from assay table. 1 g/t silver is below against the default band [500, 200, 100, 30] g/t. Grade×width 1.0 g/t·m is below.
Negative factors
- 1 g/t silver is below the weak threshold (30 g/t) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“1”
Context: TABLE 2 · DDH WD-26-14 CERTIFIED ASSAYS
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
WD-26-14Wedge · goldGrade: 0.052Grade Unit: g/tIntercept: 1 mView all detailsHide details
Identity
- Hole ID
- WD-26-14
- Project
- Wedge
- Commodity
- gold
- Region
- canada_nb
- Reported Region
- canada_nb
- Ticker
- NINE.CN
Geometry
- Grade
- 0.052
- Grade Unit
- g/t
- Intercept
- 1 m
- From
- 122.5 m
- To
- 123.5 m
- Hole Depth
- 158 m
- Intercept Depth
- 122.5 m
Classification
- Deposit Type
- vms
- Sample Type
- drill
- Group ID
- WD-26-14:122.5-123.5
- Mining Method
- underground
Location
- Azimuth
- 295 °
- Dip
- -65 °
QA/QC
- Laboratory
- ALS Global
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Metal Eq. Grade
- 0.16
- Metal Eq. Unit
- % Cu-Eq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-24T00:00:00.000Z
Reasoning: Expanded from assay table. 0.052 g/t gold is below against the underground mining band [15, 7, 4, 2.5] g/t. Grade×width 0.1 g/t·m is below.
Negative factors
- 0.052 g/t gold is below the weak threshold (2.5 g/t) on the underground mining band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.052”
Context: TABLE 2 · DDH WD-26-14 CERTIFIED ASSAYS
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
WD-26-14Wedge · leadGrade: 0.02Grade Unit: %Intercept: 1 mView all detailsHide details
Identity
- Hole ID
- WD-26-14
- Project
- Wedge
- Commodity
- lead
- Region
- canada_nb
- Reported Region
- canada_nb
- Ticker
- NINE.CN
Geometry
- Grade
- 0.02
- Grade Unit
- %
- Intercept
- 1 m
- From
- 122.5 m
- To
- 123.5 m
- Hole Depth
- 158 m
- Intercept Depth
- 122.5 m
Classification
- Deposit Type
- vms
- Sample Type
- drill
- Group ID
- WD-26-14:122.5-123.5
- Mining Method
- underground
Location
- Azimuth
- 295 °
- Dip
- -65 °
QA/QC
- Laboratory
- ALS Global
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Metal Eq. Grade
- 0.16
- Metal Eq. Unit
- % Cu-Eq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-24T00:00:00.000Z
Reasoning: Expanded from assay table. 0.02 % lead is below against the default band [10, 6, 3, 1] %. Grade×width 0.0 %·m is below.
Negative factors
- 0.02 % lead is below the weak threshold (1 %) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.02”
Context: TABLE 2 · DDH WD-26-14 CERTIFIED ASSAYS
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
WD-26-14Wedge · zincGrade: 0.08Grade Unit: %Intercept: 1 mView all detailsHide details
Identity
- Hole ID
- WD-26-14
- Project
- Wedge
- Commodity
- zinc
- Region
- canada_nb
- Reported Region
- canada_nb
- Ticker
- NINE.CN
Geometry
- Grade
- 0.08
- Grade Unit
- %
- Intercept
- 1 m
- From
- 122.5 m
- To
- 123.5 m
- Hole Depth
- 158 m
- Intercept Depth
- 122.5 m
Classification
- Deposit Type
- vms
- Sample Type
- drill
- Group ID
- WD-26-14:122.5-123.5
- Mining Method
- underground
Location
- Azimuth
- 295 °
- Dip
- -65 °
QA/QC
- Laboratory
- ALS Global
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Metal Eq. Grade
- 0.16
- Metal Eq. Unit
- % Cu-Eq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-24T00:00:00.000Z
Reasoning: Expanded from assay table. 0.08 % zinc is below against the default band [18, 10, 5, 2] %. Grade×width 0.1 %·m is below.
Negative factors
- 0.08 % zinc is below the weak threshold (2 %) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.08”
Context: TABLE 2 · DDH WD-26-14 CERTIFIED ASSAYS
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
WD-26-14Wedge · silverGrade: 1Grade Unit: g/tIntercept: 1.5 mView all detailsHide details
Identity
- Hole ID
- WD-26-14
- Project
- Wedge
- Commodity
- silver
- Region
- canada_nb
- Reported Region
- canada_nb
- Ticker
- NINE.CN
Geometry
- Grade
- 1
- Grade Unit
- g/t
- Intercept
- 1.5 m
- From
- 123.5 m
- To
- 125 m
- Hole Depth
- 158 m
- Intercept Depth
- 123.5 m
Classification
- Deposit Type
- vms
- Sample Type
- drill
- Group ID
- WD-26-14:123.5-125
- Mining Method
- underground
Location
- Azimuth
- 295 °
- Dip
- -65 °
QA/QC
- Laboratory
- ALS Global
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Metal Eq. Grade
- 0.2
- Metal Eq. Unit
- % Cu-Eq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-24T00:00:00.000Z
Reasoning: Expanded from assay table. 1 g/t silver is below against the default band [500, 200, 100, 30] g/t. Grade×width 1.5 g/t·m is below.
Negative factors
- 1 g/t silver is below the weak threshold (30 g/t) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“1”
Context: TABLE 2 · DDH WD-26-14 CERTIFIED ASSAYS
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
WD-26-14Wedge · goldGrade: 0.017Grade Unit: g/tIntercept: 1.5 mView all detailsHide details
Identity
- Hole ID
- WD-26-14
- Project
- Wedge
- Commodity
- gold
- Region
- canada_nb
- Reported Region
- canada_nb
- Ticker
- NINE.CN
Geometry
- Grade
- 0.017
- Grade Unit
- g/t
- Intercept
- 1.5 m
- From
- 123.5 m
- To
- 125 m
- Hole Depth
- 158 m
- Intercept Depth
- 123.5 m
Classification
- Deposit Type
- vms
- Sample Type
- drill
- Group ID
- WD-26-14:123.5-125
- Mining Method
- underground
Location
- Azimuth
- 295 °
- Dip
- -65 °
QA/QC
- Laboratory
- ALS Global
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Metal Eq. Grade
- 0.2
- Metal Eq. Unit
- % Cu-Eq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-24T00:00:00.000Z
Reasoning: Expanded from assay table. 0.017 g/t gold is below against the underground mining band [15, 7, 4, 2.5] g/t. Grade×width 0.0 g/t·m is below.
Negative factors
- 0.017 g/t gold is below the weak threshold (2.5 g/t) on the underground mining band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.017”
Context: TABLE 2 · DDH WD-26-14 CERTIFIED ASSAYS
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
WD-26-14Wedge · leadGrade: 0.05Grade Unit: %Intercept: 1.5 mView all detailsHide details
Identity
- Hole ID
- WD-26-14
- Project
- Wedge
- Commodity
- lead
- Region
- canada_nb
- Reported Region
- canada_nb
- Ticker
- NINE.CN
Geometry
- Grade
- 0.05
- Grade Unit
- %
- Intercept
- 1.5 m
- From
- 123.5 m
- To
- 125 m
- Hole Depth
- 158 m
- Intercept Depth
- 123.5 m
Classification
- Deposit Type
- vms
- Sample Type
- drill
- Group ID
- WD-26-14:123.5-125
- Mining Method
- underground
Location
- Azimuth
- 295 °
- Dip
- -65 °
QA/QC
- Laboratory
- ALS Global
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Metal Eq. Grade
- 0.2
- Metal Eq. Unit
- % Cu-Eq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-24T00:00:00.000Z
Reasoning: Expanded from assay table. 0.05 % lead is below against the default band [10, 6, 3, 1] %. Grade×width 0.1 %·m is below.
Negative factors
- 0.05 % lead is below the weak threshold (1 %) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.05”
Context: TABLE 2 · DDH WD-26-14 CERTIFIED ASSAYS
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
WD-26-14Wedge · zincGrade: 0.48Grade Unit: %Intercept: 1.5 mView all detailsHide details
Identity
- Hole ID
- WD-26-14
- Project
- Wedge
- Commodity
- zinc
- Region
- canada_nb
- Reported Region
- canada_nb
- Ticker
- NINE.CN
Geometry
- Grade
- 0.48
- Grade Unit
- %
- Intercept
- 1.5 m
- From
- 123.5 m
- To
- 125 m
- Hole Depth
- 158 m
- Intercept Depth
- 123.5 m
Classification
- Deposit Type
- vms
- Sample Type
- drill
- Group ID
- WD-26-14:123.5-125
- Mining Method
- underground
Location
- Azimuth
- 295 °
- Dip
- -65 °
QA/QC
- Laboratory
- ALS Global
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Metal Eq. Grade
- 0.2
- Metal Eq. Unit
- % Cu-Eq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-24T00:00:00.000Z
Reasoning: Expanded from assay table. 0.48 % zinc is below against the default band [18, 10, 5, 2] %. Grade×width 0.7 %·m is below.
Negative factors
- 0.48 % zinc is below the weak threshold (2 %) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.48”
Context: TABLE 2 · DDH WD-26-14 CERTIFIED ASSAYS
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
WD-26-14Wedge · silverGrade: 1Grade Unit: g/tIntercept: 1.5 mView all detailsHide details
Identity
- Hole ID
- WD-26-14
- Project
- Wedge
- Commodity
- silver
- Region
- canada_nb
- Reported Region
- canada_nb
- Ticker
- NINE.CN
Geometry
- Grade
- 1
- Grade Unit
- g/t
- Intercept
- 1.5 m
- From
- 125 m
- To
- 126.5 m
- Hole Depth
- 158 m
- Intercept Depth
- 125 m
Classification
- Deposit Type
- vms
- Sample Type
- drill
- Group ID
- WD-26-14:125-126.5
- Mining Method
- underground
Location
- Azimuth
- 295 °
- Dip
- -65 °
QA/QC
- Laboratory
- ALS Global
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Metal Eq. Grade
- 0.23
- Metal Eq. Unit
- % Cu-Eq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-24T00:00:00.000Z
Reasoning: Expanded from assay table. 1 g/t silver is below against the default band [500, 200, 100, 30] g/t. Grade×width 1.5 g/t·m is below.
Negative factors
- 1 g/t silver is below the weak threshold (30 g/t) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“1”
Context: TABLE 2 · DDH WD-26-14 CERTIFIED ASSAYS
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
WD-26-14Wedge · goldGrade: 0.059Grade Unit: g/tIntercept: 1.5 mView all detailsHide details
Identity
- Hole ID
- WD-26-14
- Project
- Wedge
- Commodity
- gold
- Region
- canada_nb
- Reported Region
- canada_nb
- Ticker
- NINE.CN
Geometry
- Grade
- 0.059
- Grade Unit
- g/t
- Intercept
- 1.5 m
- From
- 125 m
- To
- 126.5 m
- Hole Depth
- 158 m
- Intercept Depth
- 125 m
Classification
- Deposit Type
- vms
- Sample Type
- drill
- Group ID
- WD-26-14:125-126.5
- Mining Method
- underground
Location
- Azimuth
- 295 °
- Dip
- -65 °
QA/QC
- Laboratory
- ALS Global
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Metal Eq. Grade
- 0.23
- Metal Eq. Unit
- % Cu-Eq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-24T00:00:00.000Z
Reasoning: Expanded from assay table. 0.059 g/t gold is below against the underground mining band [15, 7, 4, 2.5] g/t. Grade×width 0.1 g/t·m is below.
Negative factors
- 0.059 g/t gold is below the weak threshold (2.5 g/t) on the underground mining band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.059”
Context: TABLE 2 · DDH WD-26-14 CERTIFIED ASSAYS
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
WD-26-14Wedge · leadGrade: 0.01Grade Unit: %Intercept: 1.5 mView all detailsHide details
Identity
- Hole ID
- WD-26-14
- Project
- Wedge
- Commodity
- lead
- Region
- canada_nb
- Reported Region
- canada_nb
- Ticker
- NINE.CN
Geometry
- Grade
- 0.01
- Grade Unit
- %
- Intercept
- 1.5 m
- From
- 125 m
- To
- 126.5 m
- Hole Depth
- 158 m
- Intercept Depth
- 125 m
Classification
- Deposit Type
- vms
- Sample Type
- drill
- Group ID
- WD-26-14:125-126.5
- Mining Method
- underground
Location
- Azimuth
- 295 °
- Dip
- -65 °
QA/QC
- Laboratory
- ALS Global
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Metal Eq. Grade
- 0.23
- Metal Eq. Unit
- % Cu-Eq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-24T00:00:00.000Z
Reasoning: Expanded from assay table. 0.01 % lead is below against the default band [10, 6, 3, 1] %. Grade×width 0.0 %·m is below.
Negative factors
- 0.01 % lead is below the weak threshold (1 %) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.01”
Context: TABLE 2 · DDH WD-26-14 CERTIFIED ASSAYS
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
WD-26-14Wedge · zincGrade: 0.07Grade Unit: %Intercept: 1.5 mView all detailsHide details
Identity
- Hole ID
- WD-26-14
- Project
- Wedge
- Commodity
- zinc
- Region
- canada_nb
- Reported Region
- canada_nb
- Ticker
- NINE.CN
Geometry
- Grade
- 0.07
- Grade Unit
- %
- Intercept
- 1.5 m
- From
- 125 m
- To
- 126.5 m
- Hole Depth
- 158 m
- Intercept Depth
- 125 m
Classification
- Deposit Type
- vms
- Sample Type
- drill
- Group ID
- WD-26-14:125-126.5
- Mining Method
- underground
Location
- Azimuth
- 295 °
- Dip
- -65 °
QA/QC
- Laboratory
- ALS Global
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Metal Eq. Grade
- 0.23
- Metal Eq. Unit
- % Cu-Eq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-24T00:00:00.000Z
Reasoning: Expanded from assay table. 0.07 % zinc is below against the default band [18, 10, 5, 2] %. Grade×width 0.1 %·m is below.
Negative factors
- 0.07 % zinc is below the weak threshold (2 %) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.07”
Context: TABLE 2 · DDH WD-26-14 CERTIFIED ASSAYS
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
WD-26-14Wedge · goldGrade: 0.045Grade Unit: g/tIntercept: 1.5 mView all detailsHide details
Identity
- Hole ID
- WD-26-14
- Project
- Wedge
- Commodity
- gold
- Region
- canada_nb
- Reported Region
- canada_nb
- Ticker
- NINE.CN
Geometry
- Grade
- 0.045
- Grade Unit
- g/t
- Intercept
- 1.5 m
- From
- 126.5 m
- To
- 128 m
- Hole Depth
- 158 m
- Intercept Depth
- 126.5 m
Classification
- Deposit Type
- vms
- Sample Type
- drill
- Group ID
- WD-26-14:126.5-128
- Mining Method
- underground
Location
- Azimuth
- 295 °
- Dip
- -65 °
QA/QC
- Laboratory
- ALS Global
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Metal Eq. Grade
- 0.29
- Metal Eq. Unit
- % Cu-Eq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-24T00:00:00.000Z
Reasoning: Expanded from assay table. 0.045 g/t gold is below against the underground mining band [15, 7, 4, 2.5] g/t. Grade×width 0.1 g/t·m is below.
Negative factors
- 0.045 g/t gold is below the weak threshold (2.5 g/t) on the underground mining band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.045”
Context: TABLE 2 · DDH WD-26-14 CERTIFIED ASSAYS
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
WD-26-14Wedge · leadGrade: 0.01Grade Unit: %Intercept: 1.5 mView all detailsHide details
Identity
- Hole ID
- WD-26-14
- Project
- Wedge
- Commodity
- lead
- Region
- canada_nb
- Reported Region
- canada_nb
- Ticker
- NINE.CN
Geometry
- Grade
- 0.01
- Grade Unit
- %
- Intercept
- 1.5 m
- From
- 126.5 m
- To
- 128 m
- Hole Depth
- 158 m
- Intercept Depth
- 126.5 m
Classification
- Deposit Type
- vms
- Sample Type
- drill
- Group ID
- WD-26-14:126.5-128
- Mining Method
- underground
Location
- Azimuth
- 295 °
- Dip
- -65 °
QA/QC
- Laboratory
- ALS Global
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Metal Eq. Grade
- 0.29
- Metal Eq. Unit
- % Cu-Eq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-24T00:00:00.000Z
Reasoning: Expanded from assay table. 0.01 % lead is below against the default band [10, 6, 3, 1] %. Grade×width 0.0 %·m is below.
Negative factors
- 0.01 % lead is below the weak threshold (1 %) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.01”
Context: TABLE 2 · DDH WD-26-14 CERTIFIED ASSAYS
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
WD-26-14Wedge · zincGrade: 0.08Grade Unit: %Intercept: 1.5 mView all detailsHide details
Identity
- Hole ID
- WD-26-14
- Project
- Wedge
- Commodity
- zinc
- Region
- canada_nb
- Reported Region
- canada_nb
- Ticker
- NINE.CN
Geometry
- Grade
- 0.08
- Grade Unit
- %
- Intercept
- 1.5 m
- From
- 126.5 m
- To
- 128 m
- Hole Depth
- 158 m
- Intercept Depth
- 126.5 m
Classification
- Deposit Type
- vms
- Sample Type
- drill
- Group ID
- WD-26-14:126.5-128
- Mining Method
- underground
Location
- Azimuth
- 295 °
- Dip
- -65 °
QA/QC
- Laboratory
- ALS Global
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Metal Eq. Grade
- 0.29
- Metal Eq. Unit
- % Cu-Eq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-24T00:00:00.000Z
Reasoning: Expanded from assay table. 0.08 % zinc is below against the default band [18, 10, 5, 2] %. Grade×width 0.1 %·m is below.
Negative factors
- 0.08 % zinc is below the weak threshold (2 %) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.08”
Context: TABLE 2 · DDH WD-26-14 CERTIFIED ASSAYS
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
WD-26-14Wedge · goldGrade: 0.012Grade Unit: g/tIntercept: 1.5 mView all detailsHide details
Identity
- Hole ID
- WD-26-14
- Project
- Wedge
- Commodity
- gold
- Region
- canada_nb
- Reported Region
- canada_nb
- Ticker
- NINE.CN
Geometry
- Grade
- 0.012
- Grade Unit
- g/t
- Intercept
- 1.5 m
- From
- 128 m
- To
- 129.5 m
- Hole Depth
- 158 m
- Intercept Depth
- 128 m
Classification
- Deposit Type
- vms
- Sample Type
- drill
- Group ID
- WD-26-14:128-129.5
- Mining Method
- underground
Location
- Azimuth
- 295 °
- Dip
- -65 °
QA/QC
- Laboratory
- ALS Global
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Metal Eq. Grade
- 0.1
- Metal Eq. Unit
- % Cu-Eq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-24T00:00:00.000Z
Reasoning: Expanded from assay table. 0.012 g/t gold is below against the underground mining band [15, 7, 4, 2.5] g/t. Grade×width 0.0 g/t·m is below.
Negative factors
- 0.012 g/t gold is below the weak threshold (2.5 g/t) on the underground mining band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.012”
Context: TABLE 2 · DDH WD-26-14 CERTIFIED ASSAYS
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
WD-26-14Wedge · leadGrade: 0Grade Unit: %Intercept: 1.5 mView all detailsHide details
Identity
- Hole ID
- WD-26-14
- Project
- Wedge
- Commodity
- lead
- Region
- canada_nb
- Reported Region
- canada_nb
- Ticker
- NINE.CN
Geometry
- Grade
- 0
- Grade Unit
- %
- Intercept
- 1.5 m
- From
- 128 m
- To
- 129.5 m
- Hole Depth
- 158 m
- Intercept Depth
- 128 m
Classification
- Deposit Type
- vms
- Sample Type
- drill
- Group ID
- WD-26-14:128-129.5
- Mining Method
- underground
Location
- Azimuth
- 295 °
- Dip
- -65 °
QA/QC
- Laboratory
- ALS Global
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Metal Eq. Grade
- 0.1
- Metal Eq. Unit
- % Cu-Eq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-24T00:00:00.000Z
Reasoning: Expanded from assay table. 0 % lead is below against the default band [10, 6, 3, 1] %. Grade×width 0.0 %·m is below.
Negative factors
- 0 % lead is below the weak threshold (1 %) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.00”
Context: TABLE 2 · DDH WD-26-14 CERTIFIED ASSAYS
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
WD-26-14Wedge · zincGrade: 0.07Grade Unit: %Intercept: 1.5 mView all detailsHide details
Identity
- Hole ID
- WD-26-14
- Project
- Wedge
- Commodity
- zinc
- Region
- canada_nb
- Reported Region
- canada_nb
- Ticker
- NINE.CN
Geometry
- Grade
- 0.07
- Grade Unit
- %
- Intercept
- 1.5 m
- From
- 128 m
- To
- 129.5 m
- Hole Depth
- 158 m
- Intercept Depth
- 128 m
Classification
- Deposit Type
- vms
- Sample Type
- drill
- Group ID
- WD-26-14:128-129.5
- Mining Method
- underground
Location
- Azimuth
- 295 °
- Dip
- -65 °
QA/QC
- Laboratory
- ALS Global
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Metal Eq. Grade
- 0.1
- Metal Eq. Unit
- % Cu-Eq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-24T00:00:00.000Z
Reasoning: Expanded from assay table. 0.07 % zinc is below against the default band [18, 10, 5, 2] %. Grade×width 0.1 %·m is below.
Negative factors
- 0.07 % zinc is below the weak threshold (2 %) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.07”
Context: TABLE 2 · DDH WD-26-14 CERTIFIED ASSAYS
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
WD-26-14Wedge · goldGrade: 0.016Grade Unit: g/tIntercept: 1.5 mView all detailsHide details
Identity
- Hole ID
- WD-26-14
- Project
- Wedge
- Commodity
- gold
- Region
- canada_nb
- Reported Region
- canada_nb
- Ticker
- NINE.CN
Geometry
- Grade
- 0.016
- Grade Unit
- g/t
- Intercept
- 1.5 m
- From
- 129.5 m
- To
- 131 m
- Hole Depth
- 158 m
- Intercept Depth
- 129.5 m
Classification
- Deposit Type
- vms
- Sample Type
- drill
- Group ID
- WD-26-14:129.5-131
- Mining Method
- underground
Location
- Azimuth
- 295 °
- Dip
- -65 °
QA/QC
- Laboratory
- ALS Global
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Metal Eq. Grade
- 0.06
- Metal Eq. Unit
- % Cu-Eq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-24T00:00:00.000Z
Reasoning: Expanded from assay table. 0.016 g/t gold is below against the underground mining band [15, 7, 4, 2.5] g/t. Grade×width 0.0 g/t·m is below.
Negative factors
- 0.016 g/t gold is below the weak threshold (2.5 g/t) on the underground mining band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.016”
Context: TABLE 2 · DDH WD-26-14 CERTIFIED ASSAYS
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
WD-26-14Wedge · leadGrade: 0.01Grade Unit: %Intercept: 1.5 mView all detailsHide details
Identity
- Hole ID
- WD-26-14
- Project
- Wedge
- Commodity
- lead
- Region
- canada_nb
- Reported Region
- canada_nb
- Ticker
- NINE.CN
Geometry
- Grade
- 0.01
- Grade Unit
- %
- Intercept
- 1.5 m
- From
- 129.5 m
- To
- 131 m
- Hole Depth
- 158 m
- Intercept Depth
- 129.5 m
Classification
- Deposit Type
- vms
- Sample Type
- drill
- Group ID
- WD-26-14:129.5-131
- Mining Method
- underground
Location
- Azimuth
- 295 °
- Dip
- -65 °
QA/QC
- Laboratory
- ALS Global
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Metal Eq. Grade
- 0.06
- Metal Eq. Unit
- % Cu-Eq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-24T00:00:00.000Z
Reasoning: Expanded from assay table. 0.01 % lead is below against the default band [10, 6, 3, 1] %. Grade×width 0.0 %·m is below.
Negative factors
- 0.01 % lead is below the weak threshold (1 %) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.01”
Context: TABLE 2 · DDH WD-26-14 CERTIFIED ASSAYS
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
WD-26-14Wedge · zincGrade: 0.03Grade Unit: %Intercept: 1.5 mView all detailsHide details
Identity
- Hole ID
- WD-26-14
- Project
- Wedge
- Commodity
- zinc
- Region
- canada_nb
- Reported Region
- canada_nb
- Ticker
- NINE.CN
Geometry
- Grade
- 0.03
- Grade Unit
- %
- Intercept
- 1.5 m
- From
- 129.5 m
- To
- 131 m
- Hole Depth
- 158 m
- Intercept Depth
- 129.5 m
Classification
- Deposit Type
- vms
- Sample Type
- drill
- Group ID
- WD-26-14:129.5-131
- Mining Method
- underground
Location
- Azimuth
- 295 °
- Dip
- -65 °
QA/QC
- Laboratory
- ALS Global
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Metal Eq. Grade
- 0.06
- Metal Eq. Unit
- % Cu-Eq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-24T00:00:00.000Z
Reasoning: Expanded from assay table. 0.03 % zinc is below against the default band [18, 10, 5, 2] %. Grade×width 0.0 %·m is below.
Negative factors
- 0.03 % zinc is below the weak threshold (2 %) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.03”
Context: TABLE 2 · DDH WD-26-14 CERTIFIED ASSAYS
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
WD-26-14Wedge · goldGrade: 0.015Grade Unit: g/tIntercept: 1.5 mView all detailsHide details
Identity
- Hole ID
- WD-26-14
- Project
- Wedge
- Commodity
- gold
- Region
- canada_nb
- Reported Region
- canada_nb
- Ticker
- NINE.CN
Geometry
- Grade
- 0.015
- Grade Unit
- g/t
- Intercept
- 1.5 m
- From
- 131 m
- To
- 132.5 m
- Hole Depth
- 158 m
- Intercept Depth
- 131 m
Classification
- Deposit Type
- vms
- Sample Type
- drill
- Group ID
- WD-26-14:131-132.5
- Mining Method
- underground
Location
- Azimuth
- 295 °
- Dip
- -65 °
QA/QC
- Laboratory
- ALS Global
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Metal Eq. Grade
- 0.05
- Metal Eq. Unit
- % Cu-Eq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-24T00:00:00.000Z
Reasoning: Expanded from assay table. 0.015 g/t gold is below against the underground mining band [15, 7, 4, 2.5] g/t. Grade×width 0.0 g/t·m is below.
Negative factors
- 0.015 g/t gold is below the weak threshold (2.5 g/t) on the underground mining band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.015”
Context: TABLE 2 · DDH WD-26-14 CERTIFIED ASSAYS
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
WD-26-14Wedge · leadGrade: 0Grade Unit: %Intercept: 1.5 mView all detailsHide details
Identity
- Hole ID
- WD-26-14
- Project
- Wedge
- Commodity
- lead
- Region
- canada_nb
- Reported Region
- canada_nb
- Ticker
- NINE.CN
Geometry
- Grade
- 0
- Grade Unit
- %
- Intercept
- 1.5 m
- From
- 131 m
- To
- 132.5 m
- Hole Depth
- 158 m
- Intercept Depth
- 131 m
Classification
- Deposit Type
- vms
- Sample Type
- drill
- Group ID
- WD-26-14:131-132.5
- Mining Method
- underground
Location
- Azimuth
- 295 °
- Dip
- -65 °
QA/QC
- Laboratory
- ALS Global
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Metal Eq. Grade
- 0.05
- Metal Eq. Unit
- % Cu-Eq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-24T00:00:00.000Z
Reasoning: Expanded from assay table. 0 % lead is below against the default band [10, 6, 3, 1] %. Grade×width 0.0 %·m is below.
Negative factors
- 0 % lead is below the weak threshold (1 %) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.00”
Context: TABLE 2 · DDH WD-26-14 CERTIFIED ASSAYS
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
WD-26-14Wedge · zincGrade: 0.05Grade Unit: %Intercept: 1.5 mView all detailsHide details
Identity
- Hole ID
- WD-26-14
- Project
- Wedge
- Commodity
- zinc
- Region
- canada_nb
- Reported Region
- canada_nb
- Ticker
- NINE.CN
Geometry
- Grade
- 0.05
- Grade Unit
- %
- Intercept
- 1.5 m
- From
- 131 m
- To
- 132.5 m
- Hole Depth
- 158 m
- Intercept Depth
- 131 m
Classification
- Deposit Type
- vms
- Sample Type
- drill
- Group ID
- WD-26-14:131-132.5
- Mining Method
- underground
Location
- Azimuth
- 295 °
- Dip
- -65 °
QA/QC
- Laboratory
- ALS Global
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Metal Eq. Grade
- 0.05
- Metal Eq. Unit
- % Cu-Eq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-24T00:00:00.000Z
Reasoning: Expanded from assay table. 0.05 % zinc is below against the default band [18, 10, 5, 2] %. Grade×width 0.1 %·m is below.
Negative factors
- 0.05 % zinc is below the weak threshold (2 %) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.05”
Context: TABLE 2 · DDH WD-26-14 CERTIFIED ASSAYS
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
WD-26-14Wedge · goldGrade: 0.009Grade Unit: g/tIntercept: 1.5 mView all detailsHide details
Identity
- Hole ID
- WD-26-14
- Project
- Wedge
- Commodity
- gold
- Region
- canada_nb
- Reported Region
- canada_nb
- Ticker
- NINE.CN
Geometry
- Grade
- 0.009
- Grade Unit
- g/t
- Intercept
- 1.5 m
- From
- 132.5 m
- To
- 134 m
- Hole Depth
- 158 m
- Intercept Depth
- 132.5 m
Classification
- Deposit Type
- vms
- Sample Type
- drill
- Group ID
- WD-26-14:132.5-134
- Mining Method
- underground
Location
- Azimuth
- 295 °
- Dip
- -65 °
QA/QC
- Laboratory
- ALS Global
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Metal Eq. Grade
- 0.02
- Metal Eq. Unit
- % Cu-Eq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-24T00:00:00.000Z
Reasoning: Expanded from assay table. 0.009 g/t gold is below against the underground mining band [15, 7, 4, 2.5] g/t. Grade×width 0.0 g/t·m is below.
Negative factors
- 0.009 g/t gold is below the weak threshold (2.5 g/t) on the underground mining band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.009”
Context: TABLE 2 · DDH WD-26-14 CERTIFIED ASSAYS
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
WD-26-14Wedge · leadGrade: 0Grade Unit: %Intercept: 1.5 mView all detailsHide details
Identity
- Hole ID
- WD-26-14
- Project
- Wedge
- Commodity
- lead
- Region
- canada_nb
- Reported Region
- canada_nb
- Ticker
- NINE.CN
Geometry
- Grade
- 0
- Grade Unit
- %
- Intercept
- 1.5 m
- From
- 132.5 m
- To
- 134 m
- Hole Depth
- 158 m
- Intercept Depth
- 132.5 m
Classification
- Deposit Type
- vms
- Sample Type
- drill
- Group ID
- WD-26-14:132.5-134
- Mining Method
- underground
Location
- Azimuth
- 295 °
- Dip
- -65 °
QA/QC
- Laboratory
- ALS Global
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Metal Eq. Grade
- 0.02
- Metal Eq. Unit
- % Cu-Eq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-24T00:00:00.000Z
Reasoning: Expanded from assay table. 0 % lead is below against the default band [10, 6, 3, 1] %. Grade×width 0.0 %·m is below.
Negative factors
- 0 % lead is below the weak threshold (1 %) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.00”
Context: TABLE 2 · DDH WD-26-14 CERTIFIED ASSAYS
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
WD-26-14Wedge · zincGrade: 0.01Grade Unit: %Intercept: 1.5 mView all detailsHide details
Identity
- Hole ID
- WD-26-14
- Project
- Wedge
- Commodity
- zinc
- Region
- canada_nb
- Reported Region
- canada_nb
- Ticker
- NINE.CN
Geometry
- Grade
- 0.01
- Grade Unit
- %
- Intercept
- 1.5 m
- From
- 132.5 m
- To
- 134 m
- Hole Depth
- 158 m
- Intercept Depth
- 132.5 m
Classification
- Deposit Type
- vms
- Sample Type
- drill
- Group ID
- WD-26-14:132.5-134
- Mining Method
- underground
Location
- Azimuth
- 295 °
- Dip
- -65 °
QA/QC
- Laboratory
- ALS Global
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Metal Eq. Grade
- 0.02
- Metal Eq. Unit
- % Cu-Eq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-24T00:00:00.000Z
Reasoning: Expanded from assay table. 0.01 % zinc is below against the default band [18, 10, 5, 2] %. Grade×width 0.0 %·m is below.
Negative factors
- 0.01 % zinc is below the weak threshold (2 %) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.01”
Context: TABLE 2 · DDH WD-26-14 CERTIFIED ASSAYS
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
WD-26-14Wedge · goldGrade: 0.019Grade Unit: g/tIntercept: 1.5 mView all detailsHide details
Identity
- Hole ID
- WD-26-14
- Project
- Wedge
- Commodity
- gold
- Region
- canada_nb
- Reported Region
- canada_nb
- Ticker
- NINE.CN
Geometry
- Grade
- 0.019
- Grade Unit
- g/t
- Intercept
- 1.5 m
- From
- 134 m
- To
- 135.5 m
- Hole Depth
- 158 m
- Intercept Depth
- 134 m
Classification
- Deposit Type
- vms
- Sample Type
- drill
- Group ID
- WD-26-14:134-135.5
- Mining Method
- underground
Location
- Azimuth
- 295 °
- Dip
- -65 °
QA/QC
- Laboratory
- ALS Global
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Metal Eq. Grade
- 0.05
- Metal Eq. Unit
- % Cu-Eq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-24T00:00:00.000Z
Reasoning: Expanded from assay table. 0.019 g/t gold is below against the underground mining band [15, 7, 4, 2.5] g/t. Grade×width 0.0 g/t·m is below.
Negative factors
- 0.019 g/t gold is below the weak threshold (2.5 g/t) on the underground mining band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.019”
Context: TABLE 2 · DDH WD-26-14 CERTIFIED ASSAYS
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
WD-26-14Wedge · leadGrade: 0.02Grade Unit: %Intercept: 1.5 mView all detailsHide details
Identity
- Hole ID
- WD-26-14
- Project
- Wedge
- Commodity
- lead
- Region
- canada_nb
- Reported Region
- canada_nb
- Ticker
- NINE.CN
Geometry
- Grade
- 0.02
- Grade Unit
- %
- Intercept
- 1.5 m
- From
- 134 m
- To
- 135.5 m
- Hole Depth
- 158 m
- Intercept Depth
- 134 m
Classification
- Deposit Type
- vms
- Sample Type
- drill
- Group ID
- WD-26-14:134-135.5
- Mining Method
- underground
Location
- Azimuth
- 295 °
- Dip
- -65 °
QA/QC
- Laboratory
- ALS Global
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Metal Eq. Grade
- 0.05
- Metal Eq. Unit
- % Cu-Eq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-24T00:00:00.000Z
Reasoning: Expanded from assay table. 0.02 % lead is below against the default band [10, 6, 3, 1] %. Grade×width 0.0 %·m is below.
Negative factors
- 0.02 % lead is below the weak threshold (1 %) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.02”
Context: TABLE 2 · DDH WD-26-14 CERTIFIED ASSAYS
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
WD-26-14Wedge · zincGrade: 0.03Grade Unit: %Intercept: 1.5 mView all detailsHide details
Identity
- Hole ID
- WD-26-14
- Project
- Wedge
- Commodity
- zinc
- Region
- canada_nb
- Reported Region
- canada_nb
- Ticker
- NINE.CN
Geometry
- Grade
- 0.03
- Grade Unit
- %
- Intercept
- 1.5 m
- From
- 134 m
- To
- 135.5 m
- Hole Depth
- 158 m
- Intercept Depth
- 134 m
Classification
- Deposit Type
- vms
- Sample Type
- drill
- Group ID
- WD-26-14:134-135.5
- Mining Method
- underground
Location
- Azimuth
- 295 °
- Dip
- -65 °
QA/QC
- Laboratory
- ALS Global
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Metal Eq. Grade
- 0.05
- Metal Eq. Unit
- % Cu-Eq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-24T00:00:00.000Z
Reasoning: Expanded from assay table. 0.03 % zinc is below against the default band [18, 10, 5, 2] %. Grade×width 0.0 %·m is below.
Negative factors
- 0.03 % zinc is below the weak threshold (2 %) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.03”
Context: TABLE 2 · DDH WD-26-14 CERTIFIED ASSAYS
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
WD-26-14Wedge · silverGrade: 1Grade Unit: g/tIntercept: 1.5 mView all detailsHide details
Identity
- Hole ID
- WD-26-14
- Project
- Wedge
- Commodity
- silver
- Region
- canada_nb
- Reported Region
- canada_nb
- Ticker
- NINE.CN
Geometry
- Grade
- 1
- Grade Unit
- g/t
- Intercept
- 1.5 m
- From
- 135.5 m
- To
- 137 m
- Hole Depth
- 158 m
- Intercept Depth
- 135.5 m
Classification
- Deposit Type
- vms
- Sample Type
- drill
- Group ID
- WD-26-14:135.5-137
- Mining Method
- underground
Location
- Azimuth
- 295 °
- Dip
- -65 °
QA/QC
- Laboratory
- ALS Global
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Metal Eq. Grade
- 0.13
- Metal Eq. Unit
- % Cu-Eq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-24T00:00:00.000Z
Reasoning: Expanded from assay table. 1 g/t silver is below against the default band [500, 200, 100, 30] g/t. Grade×width 1.5 g/t·m is below.
Negative factors
- 1 g/t silver is below the weak threshold (30 g/t) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“1”
Context: TABLE 2 · DDH WD-26-14 CERTIFIED ASSAYS
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
WD-26-14Wedge · goldGrade: 0.033Grade Unit: g/tIntercept: 1.5 mView all detailsHide details
Identity
- Hole ID
- WD-26-14
- Project
- Wedge
- Commodity
- gold
- Region
- canada_nb
- Reported Region
- canada_nb
- Ticker
- NINE.CN
Geometry
- Grade
- 0.033
- Grade Unit
- g/t
- Intercept
- 1.5 m
- From
- 135.5 m
- To
- 137 m
- Hole Depth
- 158 m
- Intercept Depth
- 135.5 m
Classification
- Deposit Type
- vms
- Sample Type
- drill
- Group ID
- WD-26-14:135.5-137
- Mining Method
- underground
Location
- Azimuth
- 295 °
- Dip
- -65 °
QA/QC
- Laboratory
- ALS Global
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Metal Eq. Grade
- 0.13
- Metal Eq. Unit
- % Cu-Eq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-24T00:00:00.000Z
Reasoning: Expanded from assay table. 0.033 g/t gold is below against the underground mining band [15, 7, 4, 2.5] g/t. Grade×width 0.0 g/t·m is below.
Negative factors
- 0.033 g/t gold is below the weak threshold (2.5 g/t) on the underground mining band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.033”
Context: TABLE 2 · DDH WD-26-14 CERTIFIED ASSAYS
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
WD-26-14Wedge · leadGrade: 0.03Grade Unit: %Intercept: 1.5 mView all detailsHide details
Identity
- Hole ID
- WD-26-14
- Project
- Wedge
- Commodity
- lead
- Region
- canada_nb
- Reported Region
- canada_nb
- Ticker
- NINE.CN
Geometry
- Grade
- 0.03
- Grade Unit
- %
- Intercept
- 1.5 m
- From
- 135.5 m
- To
- 137 m
- Hole Depth
- 158 m
- Intercept Depth
- 135.5 m
Classification
- Deposit Type
- vms
- Sample Type
- drill
- Group ID
- WD-26-14:135.5-137
- Mining Method
- underground
Location
- Azimuth
- 295 °
- Dip
- -65 °
QA/QC
- Laboratory
- ALS Global
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Metal Eq. Grade
- 0.13
- Metal Eq. Unit
- % Cu-Eq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-24T00:00:00.000Z
Reasoning: Expanded from assay table. 0.03 % lead is below against the default band [10, 6, 3, 1] %. Grade×width 0.0 %·m is below.
Negative factors
- 0.03 % lead is below the weak threshold (1 %) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.03”
Context: TABLE 2 · DDH WD-26-14 CERTIFIED ASSAYS
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
WD-26-14Wedge · zincGrade: 0.06Grade Unit: %Intercept: 1.5 mView all detailsHide details
Identity
- Hole ID
- WD-26-14
- Project
- Wedge
- Commodity
- zinc
- Region
- canada_nb
- Reported Region
- canada_nb
- Ticker
- NINE.CN
Geometry
- Grade
- 0.06
- Grade Unit
- %
- Intercept
- 1.5 m
- From
- 135.5 m
- To
- 137 m
- Hole Depth
- 158 m
- Intercept Depth
- 135.5 m
Classification
- Deposit Type
- vms
- Sample Type
- drill
- Group ID
- WD-26-14:135.5-137
- Mining Method
- underground
Location
- Azimuth
- 295 °
- Dip
- -65 °
QA/QC
- Laboratory
- ALS Global
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Metal Eq. Grade
- 0.13
- Metal Eq. Unit
- % Cu-Eq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-24T00:00:00.000Z
Reasoning: Expanded from assay table. 0.06 % zinc is below against the default band [18, 10, 5, 2] %. Grade×width 0.1 %·m is below.
Negative factors
- 0.06 % zinc is below the weak threshold (2 %) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.06”
Context: TABLE 2 · DDH WD-26-14 CERTIFIED ASSAYS
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
WD-26-14Wedge · silverGrade: 1Grade Unit: g/tIntercept: 1.5 mView all detailsHide details
Identity
- Hole ID
- WD-26-14
- Project
- Wedge
- Commodity
- silver
- Region
- canada_nb
- Reported Region
- canada_nb
- Ticker
- NINE.CN
Geometry
- Grade
- 1
- Grade Unit
- g/t
- Intercept
- 1.5 m
- From
- 137 m
- To
- 138.5 m
- Hole Depth
- 158 m
- Intercept Depth
- 137 m
Classification
- Deposit Type
- vms
- Sample Type
- drill
- Group ID
- WD-26-14:137-138.5
- Mining Method
- underground
Location
- Azimuth
- 295 °
- Dip
- -65 °
QA/QC
- Laboratory
- ALS Global
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Metal Eq. Grade
- 0.21
- Metal Eq. Unit
- % Cu-Eq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-24T00:00:00.000Z
Reasoning: Expanded from assay table. 1 g/t silver is below against the default band [500, 200, 100, 30] g/t. Grade×width 1.5 g/t·m is below.
Negative factors
- 1 g/t silver is below the weak threshold (30 g/t) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“1”
Context: TABLE 2 · DDH WD-26-14 CERTIFIED ASSAYS
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
WD-26-14Wedge · goldGrade: 0.05Grade Unit: g/tIntercept: 1.5 mView all detailsHide details
Identity
- Hole ID
- WD-26-14
- Project
- Wedge
- Commodity
- gold
- Region
- canada_nb
- Reported Region
- canada_nb
- Ticker
- NINE.CN
Geometry
- Grade
- 0.05
- Grade Unit
- g/t
- Intercept
- 1.5 m
- From
- 137 m
- To
- 138.5 m
- Hole Depth
- 158 m
- Intercept Depth
- 137 m
Classification
- Deposit Type
- vms
- Sample Type
- drill
- Group ID
- WD-26-14:137-138.5
- Mining Method
- underground
Location
- Azimuth
- 295 °
- Dip
- -65 °
QA/QC
- Laboratory
- ALS Global
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Metal Eq. Grade
- 0.21
- Metal Eq. Unit
- % Cu-Eq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-24T00:00:00.000Z
Reasoning: Expanded from assay table. 0.05 g/t gold is below against the underground mining band [15, 7, 4, 2.5] g/t. Grade×width 0.1 g/t·m is below.
Negative factors
- 0.05 g/t gold is below the weak threshold (2.5 g/t) on the underground mining band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.05”
Context: TABLE 2 · DDH WD-26-14 CERTIFIED ASSAYS
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
WD-26-14Wedge · leadGrade: 0.03Grade Unit: %Intercept: 1.5 mView all detailsHide details
Identity
- Hole ID
- WD-26-14
- Project
- Wedge
- Commodity
- lead
- Region
- canada_nb
- Reported Region
- canada_nb
- Ticker
- NINE.CN
Geometry
- Grade
- 0.03
- Grade Unit
- %
- Intercept
- 1.5 m
- From
- 137 m
- To
- 138.5 m
- Hole Depth
- 158 m
- Intercept Depth
- 137 m
Classification
- Deposit Type
- vms
- Sample Type
- drill
- Group ID
- WD-26-14:137-138.5
- Mining Method
- underground
Location
- Azimuth
- 295 °
- Dip
- -65 °
QA/QC
- Laboratory
- ALS Global
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Metal Eq. Grade
- 0.21
- Metal Eq. Unit
- % Cu-Eq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-24T00:00:00.000Z
Reasoning: Expanded from assay table. 0.03 % lead is below against the default band [10, 6, 3, 1] %. Grade×width 0.0 %·m is below.
Negative factors
- 0.03 % lead is below the weak threshold (1 %) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.03”
Context: TABLE 2 · DDH WD-26-14 CERTIFIED ASSAYS
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
WD-26-14Wedge · zincGrade: 0.09Grade Unit: %Intercept: 1.5 mView all detailsHide details
Identity
- Hole ID
- WD-26-14
- Project
- Wedge
- Commodity
- zinc
- Region
- canada_nb
- Reported Region
- canada_nb
- Ticker
- NINE.CN
Geometry
- Grade
- 0.09
- Grade Unit
- %
- Intercept
- 1.5 m
- From
- 137 m
- To
- 138.5 m
- Hole Depth
- 158 m
- Intercept Depth
- 137 m
Classification
- Deposit Type
- vms
- Sample Type
- drill
- Group ID
- WD-26-14:137-138.5
- Mining Method
- underground
Location
- Azimuth
- 295 °
- Dip
- -65 °
QA/QC
- Laboratory
- ALS Global
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Metal Eq. Grade
- 0.21
- Metal Eq. Unit
- % Cu-Eq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-24T00:00:00.000Z
Reasoning: Expanded from assay table. 0.09 % zinc is below against the default band [18, 10, 5, 2] %. Grade×width 0.1 %·m is below.
Negative factors
- 0.09 % zinc is below the weak threshold (2 %) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.09”
Context: TABLE 2 · DDH WD-26-14 CERTIFIED ASSAYS
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
WD-26-14Wedge · silverGrade: 2Grade Unit: g/tIntercept: 1.5 mView all detailsHide details
Identity
- Hole ID
- WD-26-14
- Project
- Wedge
- Commodity
- silver
- Region
- canada_nb
- Reported Region
- canada_nb
- Ticker
- NINE.CN
Geometry
- Grade
- 2
- Grade Unit
- g/t
- Intercept
- 1.5 m
- From
- 138.5 m
- To
- 140 m
- Hole Depth
- 158 m
- Intercept Depth
- 138.5 m
Classification
- Deposit Type
- vms
- Sample Type
- drill
- Group ID
- WD-26-14:138.5-140
- Mining Method
- underground
Location
- Azimuth
- 295 °
- Dip
- -65 °
QA/QC
- Laboratory
- ALS Global
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Metal Eq. Grade
- 0.31
- Metal Eq. Unit
- % Cu-Eq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-24T00:00:00.000Z
Reasoning: Expanded from assay table. 2 g/t silver is below against the default band [500, 200, 100, 30] g/t. Grade×width 3.0 g/t·m is below.
Negative factors
- 2 g/t silver is below the weak threshold (30 g/t) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“2”
Context: TABLE 2 · DDH WD-26-14 CERTIFIED ASSAYS
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
WD-26-14Wedge · goldGrade: 0.038Grade Unit: g/tIntercept: 1.5 mView all detailsHide details
Identity
- Hole ID
- WD-26-14
- Project
- Wedge
- Commodity
- gold
- Region
- canada_nb
- Reported Region
- canada_nb
- Ticker
- NINE.CN
Geometry
- Grade
- 0.038
- Grade Unit
- g/t
- Intercept
- 1.5 m
- From
- 138.5 m
- To
- 140 m
- Hole Depth
- 158 m
- Intercept Depth
- 138.5 m
Classification
- Deposit Type
- vms
- Sample Type
- drill
- Group ID
- WD-26-14:138.5-140
- Mining Method
- underground
Location
- Azimuth
- 295 °
- Dip
- -65 °
QA/QC
- Laboratory
- ALS Global
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Metal Eq. Grade
- 0.31
- Metal Eq. Unit
- % Cu-Eq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-24T00:00:00.000Z
Reasoning: Expanded from assay table. 0.038 g/t gold is below against the underground mining band [15, 7, 4, 2.5] g/t. Grade×width 0.1 g/t·m is below.
Negative factors
- 0.038 g/t gold is below the weak threshold (2.5 g/t) on the underground mining band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.038”
Context: TABLE 2 · DDH WD-26-14 CERTIFIED ASSAYS
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
WD-26-14Wedge · leadGrade: 0Grade Unit: %Intercept: 1.5 mView all detailsHide details
Identity
- Hole ID
- WD-26-14
- Project
- Wedge
- Commodity
- lead
- Region
- canada_nb
- Reported Region
- canada_nb
- Ticker
- NINE.CN
Geometry
- Grade
- 0
- Grade Unit
- %
- Intercept
- 1.5 m
- From
- 138.5 m
- To
- 140 m
- Hole Depth
- 158 m
- Intercept Depth
- 138.5 m
Classification
- Deposit Type
- vms
- Sample Type
- drill
- Group ID
- WD-26-14:138.5-140
- Mining Method
- underground
Location
- Azimuth
- 295 °
- Dip
- -65 °
QA/QC
- Laboratory
- ALS Global
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Metal Eq. Grade
- 0.31
- Metal Eq. Unit
- % Cu-Eq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-24T00:00:00.000Z
Reasoning: Expanded from assay table. 0 % lead is below against the default band [10, 6, 3, 1] %. Grade×width 0.0 %·m is below.
Negative factors
- 0 % lead is below the weak threshold (1 %) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.00”
Context: TABLE 2 · DDH WD-26-14 CERTIFIED ASSAYS
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
WD-26-14Wedge · zincGrade: 0.04Grade Unit: %Intercept: 1.5 mView all detailsHide details
Identity
- Hole ID
- WD-26-14
- Project
- Wedge
- Commodity
- zinc
- Region
- canada_nb
- Reported Region
- canada_nb
- Ticker
- NINE.CN
Geometry
- Grade
- 0.04
- Grade Unit
- %
- Intercept
- 1.5 m
- From
- 138.5 m
- To
- 140 m
- Hole Depth
- 158 m
- Intercept Depth
- 138.5 m
Classification
- Deposit Type
- vms
- Sample Type
- drill
- Group ID
- WD-26-14:138.5-140
- Mining Method
- underground
Location
- Azimuth
- 295 °
- Dip
- -65 °
QA/QC
- Laboratory
- ALS Global
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Metal Eq. Grade
- 0.31
- Metal Eq. Unit
- % Cu-Eq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-24T00:00:00.000Z
Reasoning: Expanded from assay table. 0.04 % zinc is below against the default band [18, 10, 5, 2] %. Grade×width 0.1 %·m is below.
Negative factors
- 0.04 % zinc is below the weak threshold (2 %) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.04”
Context: TABLE 2 · DDH WD-26-14 CERTIFIED ASSAYS
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
WD-26-14Wedge · silverGrade: 1Grade Unit: g/tIntercept: 1.5 mView all detailsHide details
Identity
- Hole ID
- WD-26-14
- Project
- Wedge
- Commodity
- silver
- Region
- canada_nb
- Reported Region
- canada_nb
- Ticker
- NINE.CN
Geometry
- Grade
- 1
- Grade Unit
- g/t
- Intercept
- 1.5 m
- From
- 140 m
- To
- 141.5 m
- Hole Depth
- 158 m
- Intercept Depth
- 140 m
Classification
- Deposit Type
- vms
- Sample Type
- drill
- Group ID
- WD-26-14:140-141.5
- Mining Method
- underground
Location
- Azimuth
- 295 °
- Dip
- -65 °
QA/QC
- Laboratory
- ALS Global
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Metal Eq. Grade
- 0.23
- Metal Eq. Unit
- % Cu-Eq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-24T00:00:00.000Z
Reasoning: Expanded from assay table. 1 g/t silver is below against the default band [500, 200, 100, 30] g/t. Grade×width 1.5 g/t·m is below.
Negative factors
- 1 g/t silver is below the weak threshold (30 g/t) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“1”
Context: TABLE 2 · DDH WD-26-14 CERTIFIED ASSAYS
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
WD-26-14Wedge · goldGrade: 0.043Grade Unit: g/tIntercept: 1.5 mView all detailsHide details
Identity
- Hole ID
- WD-26-14
- Project
- Wedge
- Commodity
- gold
- Region
- canada_nb
- Reported Region
- canada_nb
- Ticker
- NINE.CN
Geometry
- Grade
- 0.043
- Grade Unit
- g/t
- Intercept
- 1.5 m
- From
- 140 m
- To
- 141.5 m
- Hole Depth
- 158 m
- Intercept Depth
- 140 m
Classification
- Deposit Type
- vms
- Sample Type
- drill
- Group ID
- WD-26-14:140-141.5
- Mining Method
- underground
Location
- Azimuth
- 295 °
- Dip
- -65 °
QA/QC
- Laboratory
- ALS Global
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Metal Eq. Grade
- 0.23
- Metal Eq. Unit
- % Cu-Eq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-24T00:00:00.000Z
Reasoning: Expanded from assay table. 0.043 g/t gold is below against the underground mining band [15, 7, 4, 2.5] g/t. Grade×width 0.1 g/t·m is below.
Negative factors
- 0.043 g/t gold is below the weak threshold (2.5 g/t) on the underground mining band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.043”
Context: TABLE 2 · DDH WD-26-14 CERTIFIED ASSAYS
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
WD-26-14Wedge · leadGrade: 0Grade Unit: %Intercept: 1.5 mView all detailsHide details
Identity
- Hole ID
- WD-26-14
- Project
- Wedge
- Commodity
- lead
- Region
- canada_nb
- Reported Region
- canada_nb
- Ticker
- NINE.CN
Geometry
- Grade
- 0
- Grade Unit
- %
- Intercept
- 1.5 m
- From
- 140 m
- To
- 141.5 m
- Hole Depth
- 158 m
- Intercept Depth
- 140 m
Classification
- Deposit Type
- vms
- Sample Type
- drill
- Group ID
- WD-26-14:140-141.5
- Mining Method
- underground
Location
- Azimuth
- 295 °
- Dip
- -65 °
QA/QC
- Laboratory
- ALS Global
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Metal Eq. Grade
- 0.23
- Metal Eq. Unit
- % Cu-Eq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-24T00:00:00.000Z
Reasoning: Expanded from assay table. 0 % lead is below against the default band [10, 6, 3, 1] %. Grade×width 0.0 %·m is below.
Negative factors
- 0 % lead is below the weak threshold (1 %) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.00”
Context: TABLE 2 · DDH WD-26-14 CERTIFIED ASSAYS
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
WD-26-14Wedge · zincGrade: 0.03Grade Unit: %Intercept: 1.5 mView all detailsHide details
Identity
- Hole ID
- WD-26-14
- Project
- Wedge
- Commodity
- zinc
- Region
- canada_nb
- Reported Region
- canada_nb
- Ticker
- NINE.CN
Geometry
- Grade
- 0.03
- Grade Unit
- %
- Intercept
- 1.5 m
- From
- 140 m
- To
- 141.5 m
- Hole Depth
- 158 m
- Intercept Depth
- 140 m
Classification
- Deposit Type
- vms
- Sample Type
- drill
- Group ID
- WD-26-14:140-141.5
- Mining Method
- underground
Location
- Azimuth
- 295 °
- Dip
- -65 °
QA/QC
- Laboratory
- ALS Global
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Metal Eq. Grade
- 0.23
- Metal Eq. Unit
- % Cu-Eq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-24T00:00:00.000Z
Reasoning: Expanded from assay table. 0.03 % zinc is below against the default band [18, 10, 5, 2] %. Grade×width 0.0 %·m is below.
Negative factors
- 0.03 % zinc is below the weak threshold (2 %) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.03”
Context: TABLE 2 · DDH WD-26-14 CERTIFIED ASSAYS
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
WD-26-14Wedge · silverGrade: 1Grade Unit: g/tIntercept: 1.5 mView all detailsHide details
Identity
- Hole ID
- WD-26-14
- Project
- Wedge
- Commodity
- silver
- Region
- canada_nb
- Reported Region
- canada_nb
- Ticker
- NINE.CN
Geometry
- Grade
- 1
- Grade Unit
- g/t
- Intercept
- 1.5 m
- From
- 141.5 m
- To
- 143 m
- Hole Depth
- 158 m
- Intercept Depth
- 141.5 m
Classification
- Deposit Type
- vms
- Sample Type
- drill
- Group ID
- WD-26-14:141.5-143
- Mining Method
- underground
Location
- Azimuth
- 295 °
- Dip
- -65 °
QA/QC
- Laboratory
- ALS Global
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Metal Eq. Grade
- 0.05
- Metal Eq. Unit
- % Cu-Eq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-24T00:00:00.000Z
Reasoning: Expanded from assay table. 1 g/t silver is below against the default band [500, 200, 100, 30] g/t. Grade×width 1.5 g/t·m is below.
Negative factors
- 1 g/t silver is below the weak threshold (30 g/t) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“1”
Context: TABLE 2 · DDH WD-26-14 CERTIFIED ASSAYS
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
WD-26-14Wedge · goldGrade: 0.031Grade Unit: g/tIntercept: 1.5 mView all detailsHide details
Identity
- Hole ID
- WD-26-14
- Project
- Wedge
- Commodity
- gold
- Region
- canada_nb
- Reported Region
- canada_nb
- Ticker
- NINE.CN
Geometry
- Grade
- 0.031
- Grade Unit
- g/t
- Intercept
- 1.5 m
- From
- 141.5 m
- To
- 143 m
- Hole Depth
- 158 m
- Intercept Depth
- 141.5 m
Classification
- Deposit Type
- vms
- Sample Type
- drill
- Group ID
- WD-26-14:141.5-143
- Mining Method
- underground
Location
- Azimuth
- 295 °
- Dip
- -65 °
QA/QC
- Laboratory
- ALS Global
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Metal Eq. Grade
- 0.05
- Metal Eq. Unit
- % Cu-Eq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-24T00:00:00.000Z
Reasoning: Expanded from assay table. 0.031 g/t gold is below against the underground mining band [15, 7, 4, 2.5] g/t. Grade×width 0.0 g/t·m is below.
Negative factors
- 0.031 g/t gold is below the weak threshold (2.5 g/t) on the underground mining band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.031”
Context: TABLE 2 · DDH WD-26-14 CERTIFIED ASSAYS
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
WD-26-14Wedge · leadGrade: 0Grade Unit: %Intercept: 1.5 mView all detailsHide details
Identity
- Hole ID
- WD-26-14
- Project
- Wedge
- Commodity
- lead
- Region
- canada_nb
- Reported Region
- canada_nb
- Ticker
- NINE.CN
Geometry
- Grade
- 0
- Grade Unit
- %
- Intercept
- 1.5 m
- From
- 141.5 m
- To
- 143 m
- Hole Depth
- 158 m
- Intercept Depth
- 141.5 m
Classification
- Deposit Type
- vms
- Sample Type
- drill
- Group ID
- WD-26-14:141.5-143
- Mining Method
- underground
Location
- Azimuth
- 295 °
- Dip
- -65 °
QA/QC
- Laboratory
- ALS Global
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Metal Eq. Grade
- 0.05
- Metal Eq. Unit
- % Cu-Eq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-24T00:00:00.000Z
Reasoning: Expanded from assay table. 0 % lead is below against the default band [10, 6, 3, 1] %. Grade×width 0.0 %·m is below.
Negative factors
- 0 % lead is below the weak threshold (1 %) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.00”
Context: TABLE 2 · DDH WD-26-14 CERTIFIED ASSAYS
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
WD-26-14Wedge · zincGrade: 0.01Grade Unit: %Intercept: 1.5 mView all detailsHide details
Identity
- Hole ID
- WD-26-14
- Project
- Wedge
- Commodity
- zinc
- Region
- canada_nb
- Reported Region
- canada_nb
- Ticker
- NINE.CN
Geometry
- Grade
- 0.01
- Grade Unit
- %
- Intercept
- 1.5 m
- From
- 141.5 m
- To
- 143 m
- Hole Depth
- 158 m
- Intercept Depth
- 141.5 m
Classification
- Deposit Type
- vms
- Sample Type
- drill
- Group ID
- WD-26-14:141.5-143
- Mining Method
- underground
Location
- Azimuth
- 295 °
- Dip
- -65 °
QA/QC
- Laboratory
- ALS Global
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Metal Eq. Grade
- 0.05
- Metal Eq. Unit
- % Cu-Eq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-24T00:00:00.000Z
Reasoning: Expanded from assay table. 0.01 % zinc is below against the default band [18, 10, 5, 2] %. Grade×width 0.0 %·m is below.
Negative factors
- 0.01 % zinc is below the weak threshold (2 %) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.01”
Context: TABLE 2 · DDH WD-26-14 CERTIFIED ASSAYS
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
WD-26-14Wedge · silverGrade: 1Grade Unit: g/tIntercept: 1.5 mView all detailsHide details
Identity
- Hole ID
- WD-26-14
- Project
- Wedge
- Commodity
- silver
- Region
- canada_nb
- Reported Region
- canada_nb
- Ticker
- NINE.CN
Geometry
- Grade
- 1
- Grade Unit
- g/t
- Intercept
- 1.5 m
- From
- 143 m
- To
- 144.5 m
- Hole Depth
- 158 m
- Intercept Depth
- 143 m
Classification
- Deposit Type
- vms
- Sample Type
- drill
- Group ID
- WD-26-14:143-144.5
- Mining Method
- underground
Location
- Azimuth
- 295 °
- Dip
- -65 °
QA/QC
- Laboratory
- ALS Global
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Metal Eq. Grade
- 0.04
- Metal Eq. Unit
- % Cu-Eq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-24T00:00:00.000Z
Reasoning: Expanded from assay table. 1 g/t silver is below against the default band [500, 200, 100, 30] g/t. Grade×width 1.5 g/t·m is below.
Negative factors
- 1 g/t silver is below the weak threshold (30 g/t) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“1”
Context: TABLE 2 · DDH WD-26-14 CERTIFIED ASSAYS
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
WD-26-14Wedge · goldGrade: 0.017Grade Unit: g/tIntercept: 1.5 mView all detailsHide details
Identity
- Hole ID
- WD-26-14
- Project
- Wedge
- Commodity
- gold
- Region
- canada_nb
- Reported Region
- canada_nb
- Ticker
- NINE.CN
Geometry
- Grade
- 0.017
- Grade Unit
- g/t
- Intercept
- 1.5 m
- From
- 143 m
- To
- 144.5 m
- Hole Depth
- 158 m
- Intercept Depth
- 143 m
Classification
- Deposit Type
- vms
- Sample Type
- drill
- Group ID
- WD-26-14:143-144.5
- Mining Method
- underground
Location
- Azimuth
- 295 °
- Dip
- -65 °
QA/QC
- Laboratory
- ALS Global
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Metal Eq. Grade
- 0.04
- Metal Eq. Unit
- % Cu-Eq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-24T00:00:00.000Z
Reasoning: Expanded from assay table. 0.017 g/t gold is below against the underground mining band [15, 7, 4, 2.5] g/t. Grade×width 0.0 g/t·m is below.
Negative factors
- 0.017 g/t gold is below the weak threshold (2.5 g/t) on the underground mining band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.017”
Context: TABLE 2 · DDH WD-26-14 CERTIFIED ASSAYS
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
WD-26-14Wedge · leadGrade: 0Grade Unit: %Intercept: 1.5 mView all detailsHide details
Identity
- Hole ID
- WD-26-14
- Project
- Wedge
- Commodity
- lead
- Region
- canada_nb
- Reported Region
- canada_nb
- Ticker
- NINE.CN
Geometry
- Grade
- 0
- Grade Unit
- %
- Intercept
- 1.5 m
- From
- 143 m
- To
- 144.5 m
- Hole Depth
- 158 m
- Intercept Depth
- 143 m
Classification
- Deposit Type
- vms
- Sample Type
- drill
- Group ID
- WD-26-14:143-144.5
- Mining Method
- underground
Location
- Azimuth
- 295 °
- Dip
- -65 °
QA/QC
- Laboratory
- ALS Global
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Metal Eq. Grade
- 0.04
- Metal Eq. Unit
- % Cu-Eq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-24T00:00:00.000Z
Reasoning: Expanded from assay table. 0 % lead is below against the default band [10, 6, 3, 1] %. Grade×width 0.0 %·m is below.
Negative factors
- 0 % lead is below the weak threshold (1 %) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.00”
Context: TABLE 2 · DDH WD-26-14 CERTIFIED ASSAYS
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
WD-26-14Wedge · zincGrade: 0.01Grade Unit: %Intercept: 1.5 mView all detailsHide details
Identity
- Hole ID
- WD-26-14
- Project
- Wedge
- Commodity
- zinc
- Region
- canada_nb
- Reported Region
- canada_nb
- Ticker
- NINE.CN
Geometry
- Grade
- 0.01
- Grade Unit
- %
- Intercept
- 1.5 m
- From
- 143 m
- To
- 144.5 m
- Hole Depth
- 158 m
- Intercept Depth
- 143 m
Classification
- Deposit Type
- vms
- Sample Type
- drill
- Group ID
- WD-26-14:143-144.5
- Mining Method
- underground
Location
- Azimuth
- 295 °
- Dip
- -65 °
QA/QC
- Laboratory
- ALS Global
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Metal Eq. Grade
- 0.04
- Metal Eq. Unit
- % Cu-Eq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-24T00:00:00.000Z
Reasoning: Expanded from assay table. 0.01 % zinc is below against the default band [18, 10, 5, 2] %. Grade×width 0.0 %·m is below.
Negative factors
- 0.01 % zinc is below the weak threshold (2 %) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.01”
Context: TABLE 2 · DDH WD-26-14 CERTIFIED ASSAYS
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
WD-26-14Wedge · goldGrade: 0.016Grade Unit: g/tIntercept: 1.5 mView all detailsHide details
Identity
- Hole ID
- WD-26-14
- Project
- Wedge
- Commodity
- gold
- Region
- canada_nb
- Reported Region
- canada_nb
- Ticker
- NINE.CN
Geometry
- Grade
- 0.016
- Grade Unit
- g/t
- Intercept
- 1.5 m
- From
- 144.5 m
- To
- 146 m
- Hole Depth
- 158 m
- Intercept Depth
- 144.5 m
Classification
- Deposit Type
- vms
- Sample Type
- drill
- Group ID
- WD-26-14:144.5-146
- Mining Method
- underground
Location
- Azimuth
- 295 °
- Dip
- -65 °
QA/QC
- Laboratory
- ALS Global
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Metal Eq. Grade
- 0.03
- Metal Eq. Unit
- % Cu-Eq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-24T00:00:00.000Z
Reasoning: Expanded from assay table. 0.016 g/t gold is below against the underground mining band [15, 7, 4, 2.5] g/t. Grade×width 0.0 g/t·m is below.
Negative factors
- 0.016 g/t gold is below the weak threshold (2.5 g/t) on the underground mining band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.016”
Context: TABLE 2 · DDH WD-26-14 CERTIFIED ASSAYS
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
WD-26-14Wedge · leadGrade: 0Grade Unit: %Intercept: 1.5 mView all detailsHide details
Identity
- Hole ID
- WD-26-14
- Project
- Wedge
- Commodity
- lead
- Region
- canada_nb
- Reported Region
- canada_nb
- Ticker
- NINE.CN
Geometry
- Grade
- 0
- Grade Unit
- %
- Intercept
- 1.5 m
- From
- 144.5 m
- To
- 146 m
- Hole Depth
- 158 m
- Intercept Depth
- 144.5 m
Classification
- Deposit Type
- vms
- Sample Type
- drill
- Group ID
- WD-26-14:144.5-146
- Mining Method
- underground
Location
- Azimuth
- 295 °
- Dip
- -65 °
QA/QC
- Laboratory
- ALS Global
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Metal Eq. Grade
- 0.03
- Metal Eq. Unit
- % Cu-Eq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-24T00:00:00.000Z
Reasoning: Expanded from assay table. 0 % lead is below against the default band [10, 6, 3, 1] %. Grade×width 0.0 %·m is below.
Negative factors
- 0 % lead is below the weak threshold (1 %) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.00”
Context: TABLE 2 · DDH WD-26-14 CERTIFIED ASSAYS
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
WD-26-14Wedge · zincGrade: 0.01Grade Unit: %Intercept: 1.5 mView all detailsHide details
Identity
- Hole ID
- WD-26-14
- Project
- Wedge
- Commodity
- zinc
- Region
- canada_nb
- Reported Region
- canada_nb
- Ticker
- NINE.CN
Geometry
- Grade
- 0.01
- Grade Unit
- %
- Intercept
- 1.5 m
- From
- 144.5 m
- To
- 146 m
- Hole Depth
- 158 m
- Intercept Depth
- 144.5 m
Classification
- Deposit Type
- vms
- Sample Type
- drill
- Group ID
- WD-26-14:144.5-146
- Mining Method
- underground
Location
- Azimuth
- 295 °
- Dip
- -65 °
QA/QC
- Laboratory
- ALS Global
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Metal Eq. Grade
- 0.03
- Metal Eq. Unit
- % Cu-Eq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-24T00:00:00.000Z
Reasoning: Expanded from assay table. 0.01 % zinc is below against the default band [18, 10, 5, 2] %. Grade×width 0.0 %·m is below.
Negative factors
- 0.01 % zinc is below the weak threshold (2 %) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.01”
Context: TABLE 2 · DDH WD-26-14 CERTIFIED ASSAYS
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
WD-26-14Wedge · silverGrade: 1Grade Unit: g/tIntercept: 1.5 mView all detailsHide details
Identity
- Hole ID
- WD-26-14
- Project
- Wedge
- Commodity
- silver
- Region
- canada_nb
- Reported Region
- canada_nb
- Ticker
- NINE.CN
Geometry
- Grade
- 1
- Grade Unit
- g/t
- Intercept
- 1.5 m
- From
- 146 m
- To
- 147.5 m
- Hole Depth
- 158 m
- Intercept Depth
- 146 m
Classification
- Deposit Type
- vms
- Sample Type
- drill
- Group ID
- WD-26-14:146-147.5
- Mining Method
- underground
Location
- Azimuth
- 295 °
- Dip
- -65 °
QA/QC
- Laboratory
- ALS Global
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Metal Eq. Grade
- 0.04
- Metal Eq. Unit
- % Cu-Eq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-24T00:00:00.000Z
Reasoning: Expanded from assay table. 1 g/t silver is below against the default band [500, 200, 100, 30] g/t. Grade×width 1.5 g/t·m is below.
Negative factors
- 1 g/t silver is below the weak threshold (30 g/t) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“1”
Context: TABLE 2 · DDH WD-26-14 CERTIFIED ASSAYS
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
WD-26-14Wedge · goldGrade: 0.024Grade Unit: g/tIntercept: 1.5 mView all detailsHide details
Identity
- Hole ID
- WD-26-14
- Project
- Wedge
- Commodity
- gold
- Region
- canada_nb
- Reported Region
- canada_nb
- Ticker
- NINE.CN
Geometry
- Grade
- 0.024
- Grade Unit
- g/t
- Intercept
- 1.5 m
- From
- 146 m
- To
- 147.5 m
- Hole Depth
- 158 m
- Intercept Depth
- 146 m
Classification
- Deposit Type
- vms
- Sample Type
- drill
- Group ID
- WD-26-14:146-147.5
- Mining Method
- underground
Location
- Azimuth
- 295 °
- Dip
- -65 °
QA/QC
- Laboratory
- ALS Global
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Metal Eq. Grade
- 0.04
- Metal Eq. Unit
- % Cu-Eq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-24T00:00:00.000Z
Reasoning: Expanded from assay table. 0.024 g/t gold is below against the underground mining band [15, 7, 4, 2.5] g/t. Grade×width 0.0 g/t·m is below.
Negative factors
- 0.024 g/t gold is below the weak threshold (2.5 g/t) on the underground mining band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.024”
Context: TABLE 2 · DDH WD-26-14 CERTIFIED ASSAYS
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
WD-26-14Wedge · leadGrade: 0Grade Unit: %Intercept: 1.5 mView all detailsHide details
Identity
- Hole ID
- WD-26-14
- Project
- Wedge
- Commodity
- lead
- Region
- canada_nb
- Reported Region
- canada_nb
- Ticker
- NINE.CN
Geometry
- Grade
- 0
- Grade Unit
- %
- Intercept
- 1.5 m
- From
- 146 m
- To
- 147.5 m
- Hole Depth
- 158 m
- Intercept Depth
- 146 m
Classification
- Deposit Type
- vms
- Sample Type
- drill
- Group ID
- WD-26-14:146-147.5
- Mining Method
- underground
Location
- Azimuth
- 295 °
- Dip
- -65 °
QA/QC
- Laboratory
- ALS Global
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Metal Eq. Grade
- 0.04
- Metal Eq. Unit
- % Cu-Eq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-24T00:00:00.000Z
Reasoning: Expanded from assay table. 0 % lead is below against the default band [10, 6, 3, 1] %. Grade×width 0.0 %·m is below.
Negative factors
- 0 % lead is below the weak threshold (1 %) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.00”
Context: TABLE 2 · DDH WD-26-14 CERTIFIED ASSAYS
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
WD-26-14Wedge · zincGrade: 0.01Grade Unit: %Intercept: 1.5 mView all detailsHide details
Identity
- Hole ID
- WD-26-14
- Project
- Wedge
- Commodity
- zinc
- Region
- canada_nb
- Reported Region
- canada_nb
- Ticker
- NINE.CN
Geometry
- Grade
- 0.01
- Grade Unit
- %
- Intercept
- 1.5 m
- From
- 146 m
- To
- 147.5 m
- Hole Depth
- 158 m
- Intercept Depth
- 146 m
Classification
- Deposit Type
- vms
- Sample Type
- drill
- Group ID
- WD-26-14:146-147.5
- Mining Method
- underground
Location
- Azimuth
- 295 °
- Dip
- -65 °
QA/QC
- Laboratory
- ALS Global
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Metal Eq. Grade
- 0.04
- Metal Eq. Unit
- % Cu-Eq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-24T00:00:00.000Z
Reasoning: Expanded from assay table. 0.01 % zinc is below against the default band [18, 10, 5, 2] %. Grade×width 0.0 %·m is below.
Negative factors
- 0.01 % zinc is below the weak threshold (2 %) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.01”
Context: TABLE 2 · DDH WD-26-14 CERTIFIED ASSAYS
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
WD-26-14Wedge · goldGrade: 0.011Grade Unit: g/tIntercept: 1.5 mView all detailsHide details
Identity
- Hole ID
- WD-26-14
- Project
- Wedge
- Commodity
- gold
- Region
- canada_nb
- Reported Region
- canada_nb
- Ticker
- NINE.CN
Geometry
- Grade
- 0.011
- Grade Unit
- g/t
- Intercept
- 1.5 m
- From
- 147.5 m
- To
- 149 m
- Hole Depth
- 158 m
- Intercept Depth
- 147.5 m
Classification
- Deposit Type
- vms
- Sample Type
- drill
- Group ID
- WD-26-14:147.5-149
- Mining Method
- underground
Location
- Azimuth
- 295 °
- Dip
- -65 °
QA/QC
- Laboratory
- ALS Global
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Metal Eq. Grade
- 0.02
- Metal Eq. Unit
- % Cu-Eq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-24T00:00:00.000Z
Reasoning: Expanded from assay table. 0.011 g/t gold is below against the underground mining band [15, 7, 4, 2.5] g/t. Grade×width 0.0 g/t·m is below.
Negative factors
- 0.011 g/t gold is below the weak threshold (2.5 g/t) on the underground mining band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.011”
Context: TABLE 2 · DDH WD-26-14 CERTIFIED ASSAYS
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
WD-26-14Wedge · leadGrade: 0Grade Unit: %Intercept: 1.5 mView all detailsHide details
Identity
- Hole ID
- WD-26-14
- Project
- Wedge
- Commodity
- lead
- Region
- canada_nb
- Reported Region
- canada_nb
- Ticker
- NINE.CN
Geometry
- Grade
- 0
- Grade Unit
- %
- Intercept
- 1.5 m
- From
- 147.5 m
- To
- 149 m
- Hole Depth
- 158 m
- Intercept Depth
- 147.5 m
Classification
- Deposit Type
- vms
- Sample Type
- drill
- Group ID
- WD-26-14:147.5-149
- Mining Method
- underground
Location
- Azimuth
- 295 °
- Dip
- -65 °
QA/QC
- Laboratory
- ALS Global
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Metal Eq. Grade
- 0.02
- Metal Eq. Unit
- % Cu-Eq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-24T00:00:00.000Z
Reasoning: Expanded from assay table. 0 % lead is below against the default band [10, 6, 3, 1] %. Grade×width 0.0 %·m is below.
Negative factors
- 0 % lead is below the weak threshold (1 %) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.00”
Context: TABLE 2 · DDH WD-26-14 CERTIFIED ASSAYS
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
WD-26-14Wedge · zincGrade: 0Grade Unit: %Intercept: 1.5 mView all detailsHide details
Identity
- Hole ID
- WD-26-14
- Project
- Wedge
- Commodity
- zinc
- Region
- canada_nb
- Reported Region
- canada_nb
- Ticker
- NINE.CN
Geometry
- Grade
- 0
- Grade Unit
- %
- Intercept
- 1.5 m
- From
- 147.5 m
- To
- 149 m
- Hole Depth
- 158 m
- Intercept Depth
- 147.5 m
Classification
- Deposit Type
- vms
- Sample Type
- drill
- Group ID
- WD-26-14:147.5-149
- Mining Method
- underground
Location
- Azimuth
- 295 °
- Dip
- -65 °
QA/QC
- Laboratory
- ALS Global
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Metal Eq. Grade
- 0.02
- Metal Eq. Unit
- % Cu-Eq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-24T00:00:00.000Z
Reasoning: Expanded from assay table. 0 % zinc is below against the default band [18, 10, 5, 2] %. Grade×width 0.0 %·m is below.
Negative factors
- 0 % zinc is below the weak threshold (2 %) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.00”
Context: TABLE 2 · DDH WD-26-14 CERTIFIED ASSAYS
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
WD-26-14Wedge · silverGrade: 1Grade Unit: g/tIntercept: 1.5 mView all detailsHide details
Identity
- Hole ID
- WD-26-14
- Project
- Wedge
- Commodity
- silver
- Region
- canada_nb
- Reported Region
- canada_nb
- Ticker
- NINE.CN
Geometry
- Grade
- 1
- Grade Unit
- g/t
- Intercept
- 1.5 m
- From
- 149 m
- To
- 150.5 m
- Hole Depth
- 158 m
- Intercept Depth
- 149 m
Classification
- Deposit Type
- vms
- Sample Type
- drill
- Group ID
- WD-26-14:149-150.5
- Mining Method
- underground
Location
- Azimuth
- 295 °
- Dip
- -65 °
QA/QC
- Laboratory
- ALS Global
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Metal Eq. Grade
- 0.03
- Metal Eq. Unit
- % Cu-Eq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-24T00:00:00.000Z
Reasoning: Expanded from assay table. 1 g/t silver is below against the default band [500, 200, 100, 30] g/t. Grade×width 1.5 g/t·m is below.
Negative factors
- 1 g/t silver is below the weak threshold (30 g/t) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“1”
Context: TABLE 2 · DDH WD-26-14 CERTIFIED ASSAYS
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
WD-26-14Wedge · goldGrade: 0.011Grade Unit: g/tIntercept: 1.5 mView all detailsHide details
Identity
- Hole ID
- WD-26-14
- Project
- Wedge
- Commodity
- gold
- Region
- canada_nb
- Reported Region
- canada_nb
- Ticker
- NINE.CN
Geometry
- Grade
- 0.011
- Grade Unit
- g/t
- Intercept
- 1.5 m
- From
- 149 m
- To
- 150.5 m
- Hole Depth
- 158 m
- Intercept Depth
- 149 m
Classification
- Deposit Type
- vms
- Sample Type
- drill
- Group ID
- WD-26-14:149-150.5
- Mining Method
- underground
Location
- Azimuth
- 295 °
- Dip
- -65 °
QA/QC
- Laboratory
- ALS Global
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Metal Eq. Grade
- 0.03
- Metal Eq. Unit
- % Cu-Eq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-24T00:00:00.000Z
Reasoning: Expanded from assay table. 0.011 g/t gold is below against the underground mining band [15, 7, 4, 2.5] g/t. Grade×width 0.0 g/t·m is below.
Negative factors
- 0.011 g/t gold is below the weak threshold (2.5 g/t) on the underground mining band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.011”
Context: TABLE 2 · DDH WD-26-14 CERTIFIED ASSAYS
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
WD-26-14Wedge · leadGrade: 0Grade Unit: %Intercept: 1.5 mView all detailsHide details
Identity
- Hole ID
- WD-26-14
- Project
- Wedge
- Commodity
- lead
- Region
- canada_nb
- Reported Region
- canada_nb
- Ticker
- NINE.CN
Geometry
- Grade
- 0
- Grade Unit
- %
- Intercept
- 1.5 m
- From
- 149 m
- To
- 150.5 m
- Hole Depth
- 158 m
- Intercept Depth
- 149 m
Classification
- Deposit Type
- vms
- Sample Type
- drill
- Group ID
- WD-26-14:149-150.5
- Mining Method
- underground
Location
- Azimuth
- 295 °
- Dip
- -65 °
QA/QC
- Laboratory
- ALS Global
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Metal Eq. Grade
- 0.03
- Metal Eq. Unit
- % Cu-Eq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-24T00:00:00.000Z
Reasoning: Expanded from assay table. 0 % lead is below against the default band [10, 6, 3, 1] %. Grade×width 0.0 %·m is below.
Negative factors
- 0 % lead is below the weak threshold (1 %) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.00”
Context: TABLE 2 · DDH WD-26-14 CERTIFIED ASSAYS
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
WD-26-14Wedge · zincGrade: 0.01Grade Unit: %Intercept: 1.5 mView all detailsHide details
Identity
- Hole ID
- WD-26-14
- Project
- Wedge
- Commodity
- zinc
- Region
- canada_nb
- Reported Region
- canada_nb
- Ticker
- NINE.CN
Geometry
- Grade
- 0.01
- Grade Unit
- %
- Intercept
- 1.5 m
- From
- 149 m
- To
- 150.5 m
- Hole Depth
- 158 m
- Intercept Depth
- 149 m
Classification
- Deposit Type
- vms
- Sample Type
- drill
- Group ID
- WD-26-14:149-150.5
- Mining Method
- underground
Location
- Azimuth
- 295 °
- Dip
- -65 °
QA/QC
- Laboratory
- ALS Global
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Metal Eq. Grade
- 0.03
- Metal Eq. Unit
- % Cu-Eq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-24T00:00:00.000Z
Reasoning: Expanded from assay table. 0.01 % zinc is below against the default band [18, 10, 5, 2] %. Grade×width 0.0 %·m is below.
Negative factors
- 0.01 % zinc is below the weak threshold (2 %) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.01”
Context: TABLE 2 · DDH WD-26-14 CERTIFIED ASSAYS
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
WD-26-14Wedge · goldGrade: 0.007Grade Unit: g/tIntercept: 1.5 mView all detailsHide details
Identity
- Hole ID
- WD-26-14
- Project
- Wedge
- Commodity
- gold
- Region
- canada_nb
- Reported Region
- canada_nb
- Ticker
- NINE.CN
Geometry
- Grade
- 0.007
- Grade Unit
- g/t
- Intercept
- 1.5 m
- From
- 150.5 m
- To
- 152 m
- Hole Depth
- 158 m
- Intercept Depth
- 150.5 m
Classification
- Deposit Type
- vms
- Sample Type
- drill
- Group ID
- WD-26-14:150.5-152
- Mining Method
- underground
Location
- Azimuth
- 295 °
- Dip
- -65 °
QA/QC
- Laboratory
- ALS Global
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Metal Eq. Grade
- 0.02
- Metal Eq. Unit
- % Cu-Eq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-24T00:00:00.000Z
Reasoning: Expanded from assay table. 0.007 g/t gold is below against the underground mining band [15, 7, 4, 2.5] g/t. Grade×width 0.0 g/t·m is below.
Negative factors
- 0.007 g/t gold is below the weak threshold (2.5 g/t) on the underground mining band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.007”
Context: TABLE 2 · DDH WD-26-14 CERTIFIED ASSAYS
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
WD-26-14Wedge · leadGrade: 0Grade Unit: %Intercept: 1.5 mView all detailsHide details
Identity
- Hole ID
- WD-26-14
- Project
- Wedge
- Commodity
- lead
- Region
- canada_nb
- Reported Region
- canada_nb
- Ticker
- NINE.CN
Geometry
- Grade
- 0
- Grade Unit
- %
- Intercept
- 1.5 m
- From
- 150.5 m
- To
- 152 m
- Hole Depth
- 158 m
- Intercept Depth
- 150.5 m
Classification
- Deposit Type
- vms
- Sample Type
- drill
- Group ID
- WD-26-14:150.5-152
- Mining Method
- underground
Location
- Azimuth
- 295 °
- Dip
- -65 °
QA/QC
- Laboratory
- ALS Global
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Metal Eq. Grade
- 0.02
- Metal Eq. Unit
- % Cu-Eq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-24T00:00:00.000Z
Reasoning: Expanded from assay table. 0 % lead is below against the default band [10, 6, 3, 1] %. Grade×width 0.0 %·m is below.
Negative factors
- 0 % lead is below the weak threshold (1 %) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.00”
Context: TABLE 2 · DDH WD-26-14 CERTIFIED ASSAYS
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
WD-26-14Wedge · zincGrade: 0.01Grade Unit: %Intercept: 1.5 mView all detailsHide details
Identity
- Hole ID
- WD-26-14
- Project
- Wedge
- Commodity
- zinc
- Region
- canada_nb
- Reported Region
- canada_nb
- Ticker
- NINE.CN
Geometry
- Grade
- 0.01
- Grade Unit
- %
- Intercept
- 1.5 m
- From
- 150.5 m
- To
- 152 m
- Hole Depth
- 158 m
- Intercept Depth
- 150.5 m
Classification
- Deposit Type
- vms
- Sample Type
- drill
- Group ID
- WD-26-14:150.5-152
- Mining Method
- underground
Location
- Azimuth
- 295 °
- Dip
- -65 °
QA/QC
- Laboratory
- ALS Global
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Metal Eq. Grade
- 0.02
- Metal Eq. Unit
- % Cu-Eq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-24T00:00:00.000Z
Reasoning: Expanded from assay table. 0.01 % zinc is below against the default band [18, 10, 5, 2] %. Grade×width 0.0 %·m is below.
Negative factors
- 0.01 % zinc is below the weak threshold (2 %) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.01”
Context: TABLE 2 · DDH WD-26-14 CERTIFIED ASSAYS
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
WD-26-14Wedge · silverGrade: 1Grade Unit: g/tIntercept: 1.5 mView all detailsHide details
Identity
- Hole ID
- WD-26-14
- Project
- Wedge
- Commodity
- silver
- Region
- canada_nb
- Reported Region
- canada_nb
- Ticker
- NINE.CN
Geometry
- Grade
- 1
- Grade Unit
- g/t
- Intercept
- 1.5 m
- From
- 152 m
- To
- 153.5 m
- Hole Depth
- 158 m
- Intercept Depth
- 152 m
Classification
- Deposit Type
- vms
- Sample Type
- drill
- Group ID
- WD-26-14:152-153.5
- Mining Method
- underground
Location
- Azimuth
- 295 °
- Dip
- -65 °
QA/QC
- Laboratory
- ALS Global
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Metal Eq. Grade
- 0.04
- Metal Eq. Unit
- % Cu-Eq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-24T00:00:00.000Z
Reasoning: Expanded from assay table. 1 g/t silver is below against the default band [500, 200, 100, 30] g/t. Grade×width 1.5 g/t·m is below.
Negative factors
- 1 g/t silver is below the weak threshold (30 g/t) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“1”
Context: TABLE 2 · DDH WD-26-14 CERTIFIED ASSAYS
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
WD-26-14Wedge · goldGrade: 0.019Grade Unit: g/tIntercept: 1.5 mView all detailsHide details
Identity
- Hole ID
- WD-26-14
- Project
- Wedge
- Commodity
- gold
- Region
- canada_nb
- Reported Region
- canada_nb
- Ticker
- NINE.CN
Geometry
- Grade
- 0.019
- Grade Unit
- g/t
- Intercept
- 1.5 m
- From
- 152 m
- To
- 153.5 m
- Hole Depth
- 158 m
- Intercept Depth
- 152 m
Classification
- Deposit Type
- vms
- Sample Type
- drill
- Group ID
- WD-26-14:152-153.5
- Mining Method
- underground
Location
- Azimuth
- 295 °
- Dip
- -65 °
QA/QC
- Laboratory
- ALS Global
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Metal Eq. Grade
- 0.04
- Metal Eq. Unit
- % Cu-Eq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-24T00:00:00.000Z
Reasoning: Expanded from assay table. 0.019 g/t gold is below against the underground mining band [15, 7, 4, 2.5] g/t. Grade×width 0.0 g/t·m is below.
Negative factors
- 0.019 g/t gold is below the weak threshold (2.5 g/t) on the underground mining band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.019”
Context: TABLE 2 · DDH WD-26-14 CERTIFIED ASSAYS
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
WD-26-14Wedge · leadGrade: 0Grade Unit: %Intercept: 1.5 mView all detailsHide details
Identity
- Hole ID
- WD-26-14
- Project
- Wedge
- Commodity
- lead
- Region
- canada_nb
- Reported Region
- canada_nb
- Ticker
- NINE.CN
Geometry
- Grade
- 0
- Grade Unit
- %
- Intercept
- 1.5 m
- From
- 152 m
- To
- 153.5 m
- Hole Depth
- 158 m
- Intercept Depth
- 152 m
Classification
- Deposit Type
- vms
- Sample Type
- drill
- Group ID
- WD-26-14:152-153.5
- Mining Method
- underground
Location
- Azimuth
- 295 °
- Dip
- -65 °
QA/QC
- Laboratory
- ALS Global
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Metal Eq. Grade
- 0.04
- Metal Eq. Unit
- % Cu-Eq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-24T00:00:00.000Z
Reasoning: Expanded from assay table. 0 % lead is below against the default band [10, 6, 3, 1] %. Grade×width 0.0 %·m is below.
Negative factors
- 0 % lead is below the weak threshold (1 %) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.00”
Context: TABLE 2 · DDH WD-26-14 CERTIFIED ASSAYS
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
WD-26-14Wedge · zincGrade: 0.01Grade Unit: %Intercept: 1.5 mView all detailsHide details
Identity
- Hole ID
- WD-26-14
- Project
- Wedge
- Commodity
- zinc
- Region
- canada_nb
- Reported Region
- canada_nb
- Ticker
- NINE.CN
Geometry
- Grade
- 0.01
- Grade Unit
- %
- Intercept
- 1.5 m
- From
- 152 m
- To
- 153.5 m
- Hole Depth
- 158 m
- Intercept Depth
- 152 m
Classification
- Deposit Type
- vms
- Sample Type
- drill
- Group ID
- WD-26-14:152-153.5
- Mining Method
- underground
Location
- Azimuth
- 295 °
- Dip
- -65 °
QA/QC
- Laboratory
- ALS Global
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Metal Eq. Grade
- 0.04
- Metal Eq. Unit
- % Cu-Eq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-24T00:00:00.000Z
Reasoning: Expanded from assay table. 0.01 % zinc is below against the default band [18, 10, 5, 2] %. Grade×width 0.0 %·m is below.
Negative factors
- 0.01 % zinc is below the weak threshold (2 %) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.01”
Context: TABLE 2 · DDH WD-26-14 CERTIFIED ASSAYS
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Wd-26-14WedgeIntercept: 14.15 mView all detailsHide details
Identity
- Hole ID
- Wd-26-14
- Project
- Wedge
- Region
- canada_nb
- Reported Region
- canada_nb
- Ticker
- NINE.CN
Geometry
- Intercept
- 14.15 m
- Hole Depth
- 158 m
Classification
- Deposit Type
- vms
- Sample Type
- drill
Location
- Azimuth
- 295 °
- Dip
- -65 °
QA/QC
- Laboratory
- ALS Global
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Metal Eq. Grade
- 5.09
- Metal Eq. Unit
- % Cu-Eq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-24T00:00:00.000Z
Reasoning: This is a high-grade, wide polymetallic VMS intercept with true width stated, indicating strong potential for resource expansion.
Positive factors
- High Cu-Eq grade
- Significant intercept length
- True width disclosed
- Polymetallic VMS mineralization
- QA/QC disclosed
- QP signed
Negative factors
- Metal equivalent calculation assumes uniform 95% metallurgical recovery for all metals, which may not be realistic without specific testwork
Evidence · text
“5.09% Cu-Eq Over 14.15m”
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Wd-26-14WedgeIntercept: 9 mView all detailsHide details
Identity
- Hole ID
- Wd-26-14
- Project
- Wedge
- Region
- canada_nb
- Reported Region
- canada_nb
- Ticker
- NINE.CN
Geometry
- Intercept
- 9 m
- Hole Depth
- 158 m
Classification
- Deposit Type
- vms
- Sample Type
- drill
Location
- Azimuth
- 295 °
- Dip
- -65 °
QA/QC
- Laboratory
- ALS Global
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Metal Eq. Grade
- 6.35
- Metal Eq. Unit
- % Cu-Eq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-24T00:00:00.000Z
Reasoning: This is a high-grade, wide polymetallic VMS intercept with true width stated, indicating strong potential for resource expansion.
Positive factors
- High Cu-Eq grade
- Significant intercept length
- True width disclosed
- Polymetallic VMS mineralization
- QA/QC disclosed
- QP signed
Negative factors
- Metal equivalent calculation assumes uniform 95% metallurgical recovery for all metals, which may not be realistic without specific testwork
Evidence · text
“6.35% Cu-Eq Over 9m”
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Wd-26-14WedgeIntercept: 6 mView all detailsHide details
Identity
- Hole ID
- Wd-26-14
- Project
- Wedge
- Region
- canada_nb
- Reported Region
- canada_nb
- Ticker
- NINE.CN
Geometry
- Intercept
- 6 m
- Hole Depth
- 158 m
Classification
- Deposit Type
- vms
- Sample Type
- drill
Location
- Azimuth
- 295 °
- Dip
- -65 °
QA/QC
- Laboratory
- ALS Global
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Metal Eq. Grade
- 7.45
- Metal Eq. Unit
- % Cu-Eq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-24T00:00:00.000Z
Reasoning: This is a high-grade, wide polymetallic VMS intercept with true width stated, indicating strong potential for resource expansion.
Positive factors
- High Cu-Eq grade
- Significant intercept length
- True width disclosed
- Polymetallic VMS mineralization
- QA/QC disclosed
- QP signed
Negative factors
- Metal equivalent calculation assumes uniform 95% metallurgical recovery for all metals, which may not be realistic without specific testwork
Evidence · text
“7.45% Cu-Eq Over 6m”
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
WD-26-14WedgeIntercept: 72 mView all detailsHide details
Identity
- Hole ID
- WD-26-14
- Project
- Wedge
- Region
- canada_nb
- Reported Region
- canada_nb
- Ticker
- NINE.CN
Geometry
- Intercept
- 72 m
- Hole Depth
- 158 m
Classification
- Deposit Type
- vms
- Sample Type
- drill
Location
- Azimuth
- 295 °
- Dip
- -65 °
QA/QC
- Laboratory
- ALS Global
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Metal Eq. Grade
- 1
- Metal Eq. Unit
- % Cu-Eq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-24T00:00:00.000Z
Reasoning: This is a high-grade, wide polymetallic VMS intercept with true width stated, indicating strong potential for resource expansion.
Positive factors
- High Cu-Eq grade
- Significant intercept length
- True width disclosed
- Polymetallic VMS mineralization
- QA/QC disclosed
- QP signed
Negative factors
- Metal equivalent calculation assumes uniform 95% metallurgical recovery for all metals, which may not be realistic without specific testwork
Evidence · text
“1% Cu-Eq over 72m”
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
How Atlas produces this analysis
Minestarters Atlas uses automated extraction to summarize mining announcements, identify reported measurements, and classify supporting evidence. Sentiment reflects the extracted narrative and classification rules; it is an interpretation, not a reported measurement. Evidence quotes and context are provided where available. Missing data, low-confidence results, and review flags indicate limitations. Check the original publisher announcement before relying on an interpretation.