Monument's Drill Assay Results Highlight Selinsing Gold Mine Expansion Potential
Original announcement by tmx on
- Company
- Monument Mining Limited
- Ticker
- MMY
- Exchange
- TSX
- Region
- Pahang State in the Central Gold Belt of Western Malaysia
- Primary commodity
- Gold
- Secondary commodities
- None reported
- Document categories
- Drill results
- Extracted
- 2026-08-23 22:34:14 UTC
Analysis by Minestarters Atlas
Minestarters Atlas analysis
Summary
Monument Mining Limited announced positive drill assay results from its Selinsing Gold Mine in Malaysia, highlighting the potential for resource expansion at the Buffalo Reef/Felda areas. The program, which included 23 holes, successfully intersected multiple zones of gold mineralization, with several high-grade intercepts. These results are expected to contribute to resource additions and conversion to reserves, supporting future mine planning.
Reasoning: Monument Mining reported positive drill results from its Selinsing Gold Mine, with several high-grade gold intercepts confirming and extending mineralization. The program is designed to expand resources and convert them to reserves, indicating a clear path to project growth. While true widths are pending, the overall results are encouraging and supported by robust QA/QC.
Positive factors
- High gold assay results reported, including several high-grade intercepts.
- Drilling successfully intersected multiple zones of gold mineralization, confirming continuity and extending known domains.
- The program aims to add to resources and convert them to reserves, supporting future mine planning.
- Comprehensive QA/QC procedures are disclosed, including accredited lab use and QP sign-off.
Negative factors
- True widths are not yet determined, which introduces uncertainty regarding the actual thickness of mineralization.
- Some intercepts in the BRC3/BRC4 Gap were not as significant as those in the BRC2/BRC3 gap.
Low confidence — this extraction should be reviewed alongside the original source.
Facts used in scoring: 87
Classification and evidence
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: The release includes a dedicated section on sampling, assaying, and QA/QC, mentioning accredited lab use, CRM, and blanks.
Evidence · text
“SAMPLING, ASSAYING AND QAQC The sampling technique used in the drill program is half core sampling of PQ (85mm diameter) and mainly HQ (63.5mm diameter) sized diamond drill core using a core saw. Samples are stored at the Selinsing project stores warehouse before being transported to Port Klang by Monument’s regular freight provider. The site has 24-hour security with manned guard house. Samples are shipped directly to SGS Port Klang once every week. All samples are submitted to SGS Malaysia laboratory in Port Klang, Selangor (An accredited chemical testing facility specializing in natural resources analysis for industrial clients, MS ISO/IEC 17025:2017), for analysis using fire assay (FAA303), ICP (ICP40Q) analysis and CS (CSAO6V) for carbon and sulphur analysis. Pulps and coarse residue samples are returned to site for future QAQC studies. Certified reference material (CRM) is supplied by Geostats and inserted approximately every 15m, blanks are inserted approximately every 10m. All assay results are verified by Monument staff before being entered into the Microsoft access database. All QAQC data is examined to ensure validate of the results. All collar locations are surveyed using DGPS by Monument’s on-site survey team. Downhole surveying is conducted on all drill holes using a Trushot digital down hole survey tool, captured data is communicated wirelessly from the tool to the handheld device. Surveys are generally undertaken every 30-50m. Drill core recovery is recorded at the time of drilling by the driller and checked during logging by onsite geology team. Core recovery is determined by measuring each 1m interval. Logging is qualitative in nature recording lithology, grain size, texture, weathering, structure, alteration, veining, sulphides etc. All holes are logged in full.”
NI 43-101 Compliantpositive · Story-specific tag
Resource estimate prepared in compliance with NI 43-101 (Canada) — high reporting standard.
Why it applies: The report states that the information is compiled and approved by a Qualified Person as defined by NI43-101.
Evidence · text
“The information in this report that relates to exploration results is based on information compiled and approved by Mr. Jamie Brown BSc, MAIG, Chief Managing Geologist of the Company, who is a Member of the Australian Institute of Geoscientists and a qualified person as defined by NI43-101.”
Step-Out Extensionpositive
Mineralization extended beyond the previously known limit.
Why it applies: The drilling program explicitly targets 'down dip extensions of mineralization' and identifies 'significant exploration space for future drilling and potential resource addition'.
Evidence · text
“Stage 2 Buffalo Reef/Felda Expansion drilling program focuses on potential mine expansion through definition of new mineralized zones, and down dip extensions of mineralization, outside of the existing LOM pit shell”
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: The drilling aims to 'bridge the gaps between BRC2/BRC3 and between BRC3/BRC4' and demonstrate 'continuity between previously modelled mineralized domains'.
Evidence · text
“Stage 1 Buffalo Reef/Felda Expansion drilling program focuses on evaluation of the potential resource increase to bridge the gaps between BRC2/BRC3 and between BRC3/BRC4 (Figure 1), to enable the pits to be combined and expanded”
Extracted facts
Stored fact records: 87. Some facts used in scoring do not have a stored record.
Drill Results (87)
MBRDD622Selinsing Gold Mine · goldGrade: 0.55Grade Unit: g/tIntercept: 4.2 mView all detailsHide details
Identity
- Hole ID
- MBRDD622
- Project
- Selinsing Gold Mine
- Commodity
- gold
- Region
- pahang state in the central gold belt of western malaysia
- Reported Region
- Pahang State in the Central Gold Belt of Western Malaysia
- Ticker
- MMY
Geometry
- Grade
- 0.55
- Grade Unit
- g/t
- Intercept
- 4.2 m
- From
- 37.5 m
- To
- 41.7 m
- Hole Depth
- 187.4 m
Classification
- Program
- mixed
- Sample Type
- drill
- Mining Method
- open_pit
Location
- Easting
- 421429.1
- Northing
- 471906.2
- CRS
- MRSO Local Grid
- Elevation
- 103.7 m
- Azimuth
- 262 °
- Dip
- -60 °
- Loc. Confidence
- high
QA/QC
- Laboratory
- SGS Malaysia
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- blanks, standards, duplicates, check_assays
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-05-29T00:00:00.000Z
Reasoning: This intercept shows weak gold grade over a narrow width, which is not highly material but contributes to the overall understanding of the deposit.
Negative factors
- Apparent Width Only
Evidence · table
“0.55g/t Au”
Context: 4.2
Rejected tags
Rejected tags — excluded from scoring because their label or evidence could not be verified.
Apparent Width OnlyRejected · negative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Reason: The document explicitly states that reported intervals are downhole lengths and do not represent true widths.
Evidence · text
“The reported intervals are downhole lengths and do not represent true widths. True widths will be determined once geological modelling has been completed.”
MBRDD622Selinsing Gold Mine · goldGrade: 0.64Grade Unit: g/tIntercept: 14.4 mView all detailsHide details
Identity
- Hole ID
- MBRDD622
- Project
- Selinsing Gold Mine
- Commodity
- gold
- Region
- pahang state in the central gold belt of western malaysia
- Reported Region
- Pahang State in the Central Gold Belt of Western Malaysia
- Ticker
- MMY
Geometry
- Grade
- 0.64
- Grade Unit
- g/t
- Intercept
- 14.4 m
- From
- 46.6 m
- To
- 61 m
- Hole Depth
- 187.4 m
Classification
- Program
- mixed
- Sample Type
- drill
- Mining Method
- open_pit
Location
- Easting
- 421429.1
- Northing
- 471906.2
- CRS
- MRSO Local Grid
- Elevation
- 103.7 m
- Azimuth
- 262 °
- Dip
- -60 °
- Loc. Confidence
- high
QA/QC
- Laboratory
- SGS Malaysia
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- blanks, standards, duplicates, check_assays
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-05-29T00:00:00.000Z
Reasoning: This intercept shows weak gold grade over a moderate width, which is not highly material but contributes to the overall understanding of the deposit.
Negative factors
- Apparent Width Only
Evidence · table
“0.64g/t Au”
Context: 14.4
Rejected tags
Rejected tags — excluded from scoring because their label or evidence could not be verified.
Apparent Width OnlyRejected · negative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Reason: The document explicitly states that reported intervals are downhole lengths and do not represent true widths.
Evidence · text
“The reported intervals are downhole lengths and do not represent true widths. True widths will be determined once geological modelling has been completed.”
MBRDD622Selinsing Gold Mine · goldGrade: 0.32Grade Unit: g/tIntercept: 1 mView all detailsHide details
Identity
- Hole ID
- MBRDD622
- Project
- Selinsing Gold Mine
- Commodity
- gold
- Region
- pahang state in the central gold belt of western malaysia
- Reported Region
- Pahang State in the Central Gold Belt of Western Malaysia
- Ticker
- MMY
Geometry
- Grade
- 0.32
- Grade Unit
- g/t
- Intercept
- 1 m
- From
- 86 m
- To
- 87 m
- Hole Depth
- 187.4 m
Classification
- Program
- mixed
- Sample Type
- drill
- Mining Method
- open_pit
Location
- Easting
- 421429.1
- Northing
- 471906.2
- CRS
- MRSO Local Grid
- Elevation
- 103.7 m
- Azimuth
- 262 °
- Dip
- -60 °
- Loc. Confidence
- high
QA/QC
- Laboratory
- SGS Malaysia
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- blanks, standards, duplicates, check_assays
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-05-29T00:00:00.000Z
Reasoning: This intercept shows weak gold grade over a very narrow width, which is not highly material but contributes to the overall understanding of the deposit.
Negative factors
- Apparent Width Only
Evidence · table
“0.32g/t Au”
Context: 1.0
Rejected tags
Rejected tags — excluded from scoring because their label or evidence could not be verified.
Apparent Width OnlyRejected · negative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Reason: The document explicitly states that reported intervals are downhole lengths and do not represent true widths.
Evidence · text
“The reported intervals are downhole lengths and do not represent true widths. True widths will be determined once geological modelling has been completed.”
MBRDD622Selinsing Gold Mine · goldGrade: 0.49Grade Unit: g/tIntercept: 4 mView all detailsHide details
Identity
- Hole ID
- MBRDD622
- Project
- Selinsing Gold Mine
- Commodity
- gold
- Region
- pahang state in the central gold belt of western malaysia
- Reported Region
- Pahang State in the Central Gold Belt of Western Malaysia
- Ticker
- MMY
Geometry
- Grade
- 0.49
- Grade Unit
- g/t
- Intercept
- 4 m
- From
- 93 m
- To
- 97 m
- Hole Depth
- 187.4 m
Classification
- Program
- mixed
- Sample Type
- drill
- Mining Method
- open_pit
Location
- Easting
- 421429.1
- Northing
- 471906.2
- CRS
- MRSO Local Grid
- Elevation
- 103.7 m
- Azimuth
- 262 °
- Dip
- -60 °
- Loc. Confidence
- high
QA/QC
- Laboratory
- SGS Malaysia
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- blanks, standards, duplicates, check_assays
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-05-29T00:00:00.000Z
Reasoning: This intercept shows weak gold grade over a narrow width, which is not highly material but contributes to the overall understanding of the deposit.
Negative factors
- Apparent Width Only
Evidence · table
“0.49g/t Au”
Context: 4.0
Rejected tags
Rejected tags — excluded from scoring because their label or evidence could not be verified.
Apparent Width OnlyRejected · negative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Reason: The document explicitly states that reported intervals are downhole lengths and do not represent true widths.
Evidence · text
“The reported intervals are downhole lengths and do not represent true widths. True widths will be determined once geological modelling has been completed.”
MBRDD622Selinsing Gold Mine · goldGrade: 0.6Grade Unit: g/tIntercept: 0.7 mView all detailsHide details
Identity
- Hole ID
- MBRDD622
- Project
- Selinsing Gold Mine
- Commodity
- gold
- Region
- pahang state in the central gold belt of western malaysia
- Reported Region
- Pahang State in the Central Gold Belt of Western Malaysia
- Ticker
- MMY
Geometry
- Grade
- 0.6
- Grade Unit
- g/t
- Intercept
- 0.7 m
- From
- 100.5 m
- To
- 101.2 m
- Hole Depth
- 187.4 m
Classification
- Program
- mixed
- Sample Type
- drill
- Mining Method
- open_pit
Location
- Easting
- 421429.1
- Northing
- 471906.2
- CRS
- MRSO Local Grid
- Elevation
- 103.7 m
- Azimuth
- 262 °
- Dip
- -60 °
- Loc. Confidence
- high
QA/QC
- Laboratory
- SGS Malaysia
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- blanks, standards, duplicates, check_assays
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-05-29T00:00:00.000Z
Reasoning: This intercept shows weak gold grade over a very narrow width, which is not highly material but contributes to the overall understanding of the deposit.
Negative factors
- Apparent Width Only
Evidence · table
“0.60g/t Au”
Context: 0.7
Rejected tags
Rejected tags — excluded from scoring because their label or evidence could not be verified.
Apparent Width OnlyRejected · negative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Reason: The document explicitly states that reported intervals are downhole lengths and do not represent true widths.
Evidence · text
“The reported intervals are downhole lengths and do not represent true widths. True widths will be determined once geological modelling has been completed.”
MBRDD622Selinsing Gold Mine · goldGrade: 0.32Grade Unit: g/tIntercept: 0.9 mView all detailsHide details
Identity
- Hole ID
- MBRDD622
- Project
- Selinsing Gold Mine
- Commodity
- gold
- Region
- pahang state in the central gold belt of western malaysia
- Reported Region
- Pahang State in the Central Gold Belt of Western Malaysia
- Ticker
- MMY
Geometry
- Grade
- 0.32
- Grade Unit
- g/t
- Intercept
- 0.9 m
- From
- 122.2 m
- To
- 123.1 m
- Hole Depth
- 187.4 m
Classification
- Program
- mixed
- Sample Type
- drill
- Mining Method
- open_pit
Location
- Easting
- 421429.1
- Northing
- 471906.2
- CRS
- MRSO Local Grid
- Elevation
- 103.7 m
- Azimuth
- 262 °
- Dip
- -60 °
- Loc. Confidence
- high
QA/QC
- Laboratory
- SGS Malaysia
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- blanks, standards, duplicates, check_assays
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-05-29T00:00:00.000Z
Reasoning: This intercept shows weak gold grade over a very narrow width, which is not highly material but contributes to the overall understanding of the deposit.
Negative factors
- Apparent Width Only
Evidence · table
“0.32g/t Au”
Context: 0.9
Rejected tags
Rejected tags — excluded from scoring because their label or evidence could not be verified.
Apparent Width OnlyRejected · negative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Reason: The document explicitly states that reported intervals are downhole lengths and do not represent true widths.
Evidence · text
“The reported intervals are downhole lengths and do not represent true widths. True widths will be determined once geological modelling has been completed.”
MBRDD622Selinsing Gold Mine · goldGrade: 0.84Grade Unit: g/tIntercept: 1.4 mView all detailsHide details
Identity
- Hole ID
- MBRDD622
- Project
- Selinsing Gold Mine
- Commodity
- gold
- Region
- pahang state in the central gold belt of western malaysia
- Reported Region
- Pahang State in the Central Gold Belt of Western Malaysia
- Ticker
- MMY
Geometry
- Grade
- 0.84
- Grade Unit
- g/t
- Intercept
- 1.4 m
- From
- 138.2 m
- To
- 139.6 m
- Hole Depth
- 187.4 m
Classification
- Program
- mixed
- Sample Type
- drill
- Mining Method
- open_pit
Location
- Easting
- 421429.1
- Northing
- 471906.2
- CRS
- MRSO Local Grid
- Elevation
- 103.7 m
- Azimuth
- 262 °
- Dip
- -60 °
- Loc. Confidence
- high
QA/QC
- Laboratory
- SGS Malaysia
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- blanks, standards, duplicates, check_assays
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-05-29T00:00:00.000Z
Reasoning: This intercept shows moderate gold grade over a very narrow width, which is not highly material but contributes to the overall understanding of the deposit.
Negative factors
- Apparent Width Only
Evidence · table
“0.84g/t Au”
Context: 1.4
Rejected tags
Rejected tags — excluded from scoring because their label or evidence could not be verified.
Apparent Width OnlyRejected · negative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Reason: The document explicitly states that reported intervals are downhole lengths and do not represent true widths.
Evidence · text
“The reported intervals are downhole lengths and do not represent true widths. True widths will be determined once geological modelling has been completed.”
MBRDD622Selinsing Gold Mine · goldGrade: 0.23Grade Unit: g/tIntercept: 1 mView all detailsHide details
Identity
- Hole ID
- MBRDD622
- Project
- Selinsing Gold Mine
- Commodity
- gold
- Region
- pahang state in the central gold belt of western malaysia
- Reported Region
- Pahang State in the Central Gold Belt of Western Malaysia
- Ticker
- MMY
Geometry
- Grade
- 0.23
- Grade Unit
- g/t
- Intercept
- 1 m
- From
- 143.5 m
- To
- 144.5 m
- Hole Depth
- 187.4 m
Classification
- Program
- mixed
- Sample Type
- drill
- Mining Method
- open_pit
Location
- Easting
- 421429.1
- Northing
- 471906.2
- CRS
- MRSO Local Grid
- Elevation
- 103.7 m
- Azimuth
- 262 °
- Dip
- -60 °
- Loc. Confidence
- high
QA/QC
- Laboratory
- SGS Malaysia
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- blanks, standards, duplicates, check_assays
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-05-29T00:00:00.000Z
Reasoning: This intercept shows weak gold grade over a very narrow width, which is not highly material but contributes to the overall understanding of the deposit.
Negative factors
- Apparent Width Only
Evidence · table
“0.23g/t Au”
Context: 1.0
Rejected tags
Rejected tags — excluded from scoring because their label or evidence could not be verified.
Apparent Width OnlyRejected · negative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Reason: The document explicitly states that reported intervals are downhole lengths and do not represent true widths.
Evidence · text
“The reported intervals are downhole lengths and do not represent true widths. True widths will be determined once geological modelling has been completed.”
MBRDD622Selinsing Gold Mine · goldGrade: 0.66Grade Unit: g/tIntercept: 6.5 mView all detailsHide details
Identity
- Hole ID
- MBRDD622
- Project
- Selinsing Gold Mine
- Commodity
- gold
- Region
- pahang state in the central gold belt of western malaysia
- Reported Region
- Pahang State in the Central Gold Belt of Western Malaysia
- Ticker
- MMY
Geometry
- Grade
- 0.66
- Grade Unit
- g/t
- Intercept
- 6.5 m
- From
- 148.9 m
- To
- 155.4 m
- Hole Depth
- 187.4 m
Classification
- Program
- mixed
- Sample Type
- drill
- Group ID
- MBRDD622:148.9-155.4
- Mining Method
- open_pit
Location
- Easting
- 421429.1
- Northing
- 471906.2
- CRS
- MRSO Local Grid
- Elevation
- 103.7 m
- Azimuth
- 262 °
- Dip
- -60 °
- Loc. Confidence
- high
QA/QC
- Laboratory
- SGS Malaysia
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- blanks, standards, duplicates, check_assays
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-05-29T00:00:00.000Z
Reasoning: This intercept shows weak gold grade over a moderate width, which is not highly material but contributes to the overall understanding of the deposit.
Negative factors
- Apparent Width Only
Evidence · table
“0.66g/t Au”
Context: 6.5
Rejected tags
Rejected tags — excluded from scoring because their label or evidence could not be verified.
Apparent Width OnlyRejected · negative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Reason: The document explicitly states that reported intervals are downhole lengths and do not represent true widths.
Evidence · text
“The reported intervals are downhole lengths and do not represent true widths. True widths will be determined once geological modelling has been completed.”
MBRDD622Selinsing Gold Mine · goldGrade: 1.35Grade Unit: g/tIntercept: 2.5 mView all detailsHide details
Identity
- Hole ID
- MBRDD622
- Project
- Selinsing Gold Mine
- Commodity
- gold
- Region
- pahang state in the central gold belt of western malaysia
- Reported Region
- Pahang State in the Central Gold Belt of Western Malaysia
- Ticker
- MMY
Geometry
- Grade
- 1.35
- Grade Unit
- g/t
- Intercept
- 2.5 m
- From
- 152.9 m
- To
- 155.4 m
- Hole Depth
- 187.4 m
Classification
- Program
- mixed
- Sample Type
- drill
- Group ID
- MBRDD622:148.9-155.4
- Mining Method
- open_pit
Location
- Easting
- 421429.1
- Northing
- 471906.2
- CRS
- MRSO Local Grid
- Elevation
- 103.7 m
- Azimuth
- 262 °
- Dip
- -60 °
- Loc. Confidence
- high
QA/QC
- Laboratory
- SGS Malaysia
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- blanks, standards, duplicates, check_assays
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-05-29T00:00:00.000Z
Reasoning: This sub-interval shows a moderate gold grade over a narrow width, which is a positive indicator within the broader intercept.
Negative factors
- Apparent Width Only
Evidence · table
“1.35g/t Au”
Context: 2.5
Rejected tags
Rejected tags — excluded from scoring because their label or evidence could not be verified.
Apparent Width OnlyRejected · negative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Reason: The document explicitly states that reported intervals are downhole lengths and do not represent true widths.
Evidence · text
“The reported intervals are downhole lengths and do not represent true widths. True widths will be determined once geological modelling has been completed.”
MBRDD623Selinsing Gold Mine · goldGrade: 0.63Grade Unit: g/tIntercept: 1.5 mView all detailsHide details
Identity
- Hole ID
- MBRDD623
- Project
- Selinsing Gold Mine
- Commodity
- gold
- Region
- pahang state in the central gold belt of western malaysia
- Reported Region
- Pahang State in the Central Gold Belt of Western Malaysia
- Ticker
- MMY
Geometry
- Grade
- 0.63
- Grade Unit
- g/t
- Intercept
- 1.5 m
- From
- 51.5 m
- To
- 53 m
- Hole Depth
- 250 m
Classification
- Program
- mixed
- Sample Type
- drill
- Mining Method
- open_pit
Location
- Easting
- 421449.5
- Northing
- 471439.3
- CRS
- MRSO Local Grid
- Elevation
- 98.9 m
- Azimuth
- 262 °
- Dip
- -60 °
- Loc. Confidence
- high
QA/QC
- Laboratory
- SGS Malaysia
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- blanks, standards, duplicates, check_assays
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-05-29T00:00:00.000Z
Reasoning: This intercept shows weak gold grade over a very narrow width, which is not highly material but contributes to the overall understanding of the deposit.
Negative factors
- Apparent Width Only
Evidence · table
“0.63g/t Au”
Context: 1.5
Rejected tags
Rejected tags — excluded from scoring because their label or evidence could not be verified.
Apparent Width OnlyRejected · negative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Reason: The document explicitly states that reported intervals are downhole lengths and do not represent true widths.
Evidence · text
“The reported intervals are downhole lengths and do not represent true widths. True widths will be determined once geological modelling has been completed.”
MBRDD623Selinsing Gold Mine · goldGrade: 0.28Grade Unit: g/tIntercept: 0.9 mView all detailsHide details
Identity
- Hole ID
- MBRDD623
- Project
- Selinsing Gold Mine
- Commodity
- gold
- Region
- pahang state in the central gold belt of western malaysia
- Reported Region
- Pahang State in the Central Gold Belt of Western Malaysia
- Ticker
- MMY
Geometry
- Grade
- 0.28
- Grade Unit
- g/t
- Intercept
- 0.9 m
- From
- 56 m
- To
- 56.9 m
- Hole Depth
- 250 m
Classification
- Program
- mixed
- Sample Type
- drill
- Mining Method
- open_pit
Location
- Easting
- 421449.5
- Northing
- 471439.3
- CRS
- MRSO Local Grid
- Elevation
- 98.9 m
- Azimuth
- 262 °
- Dip
- -60 °
- Loc. Confidence
- high
QA/QC
- Laboratory
- SGS Malaysia
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- blanks, standards, duplicates, check_assays
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-05-29T00:00:00.000Z
Reasoning: This intercept shows weak gold grade over a very narrow width, which is not highly material but contributes to the overall understanding of the deposit.
Negative factors
- Apparent Width Only
Evidence · table
“0.28g/t Au”
Context: 0.9
Rejected tags
Rejected tags — excluded from scoring because their label or evidence could not be verified.
Apparent Width OnlyRejected · negative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Reason: The document explicitly states that reported intervals are downhole lengths and do not represent true widths.
Evidence · text
“The reported intervals are downhole lengths and do not represent true widths. True widths will be determined once geological modelling has been completed.”
MBRDD623Selinsing Gold Mine · goldGrade: 1.25Grade Unit: g/tIntercept: 2.6 mView all detailsHide details
Identity
- Hole ID
- MBRDD623
- Project
- Selinsing Gold Mine
- Commodity
- gold
- Region
- pahang state in the central gold belt of western malaysia
- Reported Region
- Pahang State in the Central Gold Belt of Western Malaysia
- Ticker
- MMY
Geometry
- Grade
- 1.25
- Grade Unit
- g/t
- Intercept
- 2.6 m
- From
- 91.3 m
- To
- 93.9 m
- Hole Depth
- 250 m
Classification
- Program
- mixed
- Sample Type
- drill
- Mining Method
- open_pit
Location
- Easting
- 421449.5
- Northing
- 471439.3
- CRS
- MRSO Local Grid
- Elevation
- 98.9 m
- Azimuth
- 262 °
- Dip
- -60 °
- Loc. Confidence
- high
QA/QC
- Laboratory
- SGS Malaysia
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- blanks, standards, duplicates, check_assays
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-05-29T00:00:00.000Z
Reasoning: This intercept shows a moderate gold grade over a narrow width, which is a positive indicator within the overall drill program.
Negative factors
- Apparent Width Only
Evidence · table
“1.25g/t Au”
Context: 2.6
Rejected tags
Rejected tags — excluded from scoring because their label or evidence could not be verified.
Apparent Width OnlyRejected · negative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Reason: The document explicitly states that reported intervals are downhole lengths and do not represent true widths.
Evidence · text
“The reported intervals are downhole lengths and do not represent true widths. True widths will be determined once geological modelling has been completed.”
MBRDD623Selinsing Gold Mine · goldGrade: 1.54Grade Unit: g/tIntercept: 4.5 mView all detailsHide details
Identity
- Hole ID
- MBRDD623
- Project
- Selinsing Gold Mine
- Commodity
- gold
- Region
- pahang state in the central gold belt of western malaysia
- Reported Region
- Pahang State in the Central Gold Belt of Western Malaysia
- Ticker
- MMY
Geometry
- Grade
- 1.54
- Grade Unit
- g/t
- Intercept
- 4.5 m
- From
- 164 m
- To
- 168.5 m
- Hole Depth
- 250 m
Classification
- Program
- mixed
- Sample Type
- drill
- Mining Method
- open_pit
Location
- Easting
- 421449.5
- Northing
- 471439.3
- CRS
- MRSO Local Grid
- Elevation
- 98.9 m
- Azimuth
- 262 °
- Dip
- -60 °
- Loc. Confidence
- high
QA/QC
- Laboratory
- SGS Malaysia
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- blanks, standards, duplicates, check_assays
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-05-29T00:00:00.000Z
Reasoning: This intercept shows a moderate gold grade over a moderate width, which is a positive indicator within the overall drill program.
Negative factors
- Apparent Width Only
Evidence · table
“1.54g/t Au”
Context: 4.5
Rejected tags
Rejected tags — excluded from scoring because their label or evidence could not be verified.
Apparent Width OnlyRejected · negative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Reason: The document explicitly states that reported intervals are downhole lengths and do not represent true widths.
Evidence · text
“The reported intervals are downhole lengths and do not represent true widths. True widths will be determined once geological modelling has been completed.”
MBRDD624Selinsing Gold Mine · goldGrade: 0.82Grade Unit: g/tIntercept: 0.8 mView all detailsHide details
Identity
- Hole ID
- MBRDD624
- Project
- Selinsing Gold Mine
- Commodity
- gold
- Region
- pahang state in the central gold belt of western malaysia
- Reported Region
- Pahang State in the Central Gold Belt of Western Malaysia
- Ticker
- MMY
Geometry
- Grade
- 0.82
- Grade Unit
- g/t
- Intercept
- 0.8 m
- From
- 68.6 m
- To
- 69.4 m
- Hole Depth
- 200.3 m
Classification
- Program
- mixed
- Sample Type
- drill
- Mining Method
- open_pit
Location
- Easting
- 421335.7
- Northing
- 471772.5
- CRS
- MRSO Local Grid
- Elevation
- 118.6 m
- Azimuth
- 262 °
- Dip
- -60 °
- Loc. Confidence
- high
QA/QC
- Laboratory
- SGS Malaysia
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- blanks, standards, duplicates, check_assays
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-05-29T00:00:00.000Z
Reasoning: This intercept shows moderate gold grade over a very narrow width, which is not highly material but contributes to the overall understanding of the deposit.
Negative factors
- Apparent Width Only
Evidence · table
“0.82g/t Au”
Context: 0.8
Rejected tags
Rejected tags — excluded from scoring because their label or evidence could not be verified.
Apparent Width OnlyRejected · negative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Reason: The document explicitly states that reported intervals are downhole lengths and do not represent true widths.
Evidence · text
“The reported intervals are downhole lengths and do not represent true widths. True widths will be determined once geological modelling has been completed.”
MBRDD624Selinsing Gold Mine · goldGrade: 3.77Grade Unit: g/tIntercept: 3.8 mView all detailsHide details
Identity
- Hole ID
- MBRDD624
- Project
- Selinsing Gold Mine
- Commodity
- gold
- Region
- pahang state in the central gold belt of western malaysia
- Reported Region
- Pahang State in the Central Gold Belt of Western Malaysia
- Ticker
- MMY
Geometry
- Grade
- 3.77
- Grade Unit
- g/t
- Intercept
- 3.8 m
- From
- 109.7 m
- To
- 113.5 m
- Hole Depth
- 200.3 m
Classification
- Program
- mixed
- Sample Type
- drill
- Mining Method
- open_pit
Location
- Easting
- 421335.7
- Northing
- 471772.5
- CRS
- MRSO Local Grid
- Elevation
- 118.6 m
- Azimuth
- 262 °
- Dip
- -60 °
- Loc. Confidence
- high
QA/QC
- Laboratory
- SGS Malaysia
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- blanks, standards, duplicates, check_assays
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-05-29T00:00:00.000Z
Reasoning: This intercept shows a strong gold grade over a moderate width, which is a significant positive result.
Negative factors
- Apparent Width Only
Evidence · table
“3.77g/t Au”
Context: 3.8
Rejected tags
Rejected tags — excluded from scoring because their label or evidence could not be verified.
Apparent Width OnlyRejected · negative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Reason: The document explicitly states that reported intervals are downhole lengths and do not represent true widths.
Evidence · text
“The reported intervals are downhole lengths and do not represent true widths. True widths will be determined once geological modelling has been completed.”
MBRDD625Selinsing Gold Mine · goldGrade: 0.21Grade Unit: g/tIntercept: 1.5 mView all detailsHide details
Identity
- Hole ID
- MBRDD625
- Project
- Selinsing Gold Mine
- Commodity
- gold
- Region
- pahang state in the central gold belt of western malaysia
- Reported Region
- Pahang State in the Central Gold Belt of Western Malaysia
- Ticker
- MMY
Geometry
- Grade
- 0.21
- Grade Unit
- g/t
- Intercept
- 1.5 m
- From
- 9.9 m
- To
- 11.4 m
- Hole Depth
- 230.4 m
Classification
- Program
- mixed
- Sample Type
- drill
- Mining Method
- open_pit
Location
- Easting
- 421402
- Northing
- 471592.5
- CRS
- MRSO Local Grid
- Elevation
- 107.9 m
- Azimuth
- 262 °
- Dip
- -60 °
- Loc. Confidence
- high
QA/QC
- Laboratory
- SGS Malaysia
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- blanks, standards, duplicates, check_assays
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-05-29T00:00:00.000Z
Reasoning: This intercept shows weak gold grade over a very narrow width, which is not highly material but contributes to the overall understanding of the deposit.
Negative factors
- Apparent Width Only
Evidence · table
“0.21g/t Au”
Context: 1.5
Rejected tags
Rejected tags — excluded from scoring because their label or evidence could not be verified.
Apparent Width OnlyRejected · negative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Reason: The document explicitly states that reported intervals are downhole lengths and do not represent true widths.
Evidence · text
“The reported intervals are downhole lengths and do not represent true widths. True widths will be determined once geological modelling has been completed.”
MBRDD625Selinsing Gold Mine · goldGrade: 0.24Grade Unit: g/tIntercept: 1.5 mView all detailsHide details
Identity
- Hole ID
- MBRDD625
- Project
- Selinsing Gold Mine
- Commodity
- gold
- Region
- pahang state in the central gold belt of western malaysia
- Reported Region
- Pahang State in the Central Gold Belt of Western Malaysia
- Ticker
- MMY
Geometry
- Grade
- 0.24
- Grade Unit
- g/t
- Intercept
- 1.5 m
- From
- 14.4 m
- To
- 15.9 m
- Hole Depth
- 230.4 m
Classification
- Program
- mixed
- Sample Type
- drill
- Mining Method
- open_pit
Location
- Easting
- 421402
- Northing
- 471592.5
- CRS
- MRSO Local Grid
- Elevation
- 107.9 m
- Azimuth
- 262 °
- Dip
- -60 °
- Loc. Confidence
- high
QA/QC
- Laboratory
- SGS Malaysia
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- blanks, standards, duplicates, check_assays
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-05-29T00:00:00.000Z
Reasoning: This intercept shows weak gold grade over a very narrow width, which is not highly material but contributes to the overall understanding of the deposit.
Negative factors
- Apparent Width Only
Evidence · table
“0.24g/t Au”
Context: 1.5
Rejected tags
Rejected tags — excluded from scoring because their label or evidence could not be verified.
Apparent Width OnlyRejected · negative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Reason: The document explicitly states that reported intervals are downhole lengths and do not represent true widths.
Evidence · text
“The reported intervals are downhole lengths and do not represent true widths. True widths will be determined once geological modelling has been completed.”
MBRDD625Selinsing Gold Mine · goldGrade: 0.26Grade Unit: g/tIntercept: 1.5 mView all detailsHide details
Identity
- Hole ID
- MBRDD625
- Project
- Selinsing Gold Mine
- Commodity
- gold
- Region
- pahang state in the central gold belt of western malaysia
- Reported Region
- Pahang State in the Central Gold Belt of Western Malaysia
- Ticker
- MMY
Geometry
- Grade
- 0.26
- Grade Unit
- g/t
- Intercept
- 1.5 m
- From
- 45.9 m
- To
- 47.4 m
- Hole Depth
- 230.4 m
Classification
- Program
- mixed
- Sample Type
- drill
- Mining Method
- open_pit
Location
- Easting
- 421402
- Northing
- 471592.5
- CRS
- MRSO Local Grid
- Elevation
- 107.9 m
- Azimuth
- 262 °
- Dip
- -60 °
- Loc. Confidence
- high
QA/QC
- Laboratory
- SGS Malaysia
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- blanks, standards, duplicates, check_assays
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-05-29T00:00:00.000Z
Reasoning: This intercept shows weak gold grade over a very narrow width, which is not highly material but contributes to the overall understanding of the deposit.
Negative factors
- Apparent Width Only
Evidence · table
“0.26g/t Au”
Context: 1.5
Rejected tags
Rejected tags — excluded from scoring because their label or evidence could not be verified.
Apparent Width OnlyRejected · negative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Reason: The document explicitly states that reported intervals are downhole lengths and do not represent true widths.
Evidence · text
“The reported intervals are downhole lengths and do not represent true widths. True widths will be determined once geological modelling has been completed.”
MBRDD625Selinsing Gold Mine · goldGrade: 3.58Grade Unit: g/tIntercept: 5.6 mView all detailsHide details
Identity
- Hole ID
- MBRDD625
- Project
- Selinsing Gold Mine
- Commodity
- gold
- Region
- pahang state in the central gold belt of western malaysia
- Reported Region
- Pahang State in the Central Gold Belt of Western Malaysia
- Ticker
- MMY
Geometry
- Grade
- 3.58
- Grade Unit
- g/t
- Intercept
- 5.6 m
- From
- 136.9 m
- To
- 142.5 m
- Hole Depth
- 230.4 m
Classification
- Program
- mixed
- Sample Type
- drill
- Mining Method
- open_pit
Location
- Easting
- 421402
- Northing
- 471592.5
- CRS
- MRSO Local Grid
- Elevation
- 107.9 m
- Azimuth
- 262 °
- Dip
- -60 °
- Loc. Confidence
- high
QA/QC
- Laboratory
- SGS Malaysia
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- blanks, standards, duplicates, check_assays
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-05-29T00:00:00.000Z
Reasoning: This intercept shows a strong gold grade over a moderate width, which is a significant positive result.
Negative factors
- Apparent Width Only
Evidence · table
“3.58g/t Au”
Context: 5.6
Rejected tags
Rejected tags — excluded from scoring because their label or evidence could not be verified.
Apparent Width OnlyRejected · negative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Reason: The document explicitly states that reported intervals are downhole lengths and do not represent true widths.
Evidence · text
“The reported intervals are downhole lengths and do not represent true widths. True widths will be determined once geological modelling has been completed.”
MBRDD626Selinsing Gold Mine · goldGrade: 3.07Grade Unit: g/tIntercept: 16.5 mView all detailsHide details
Identity
- Hole ID
- MBRDD626
- Project
- Selinsing Gold Mine
- Commodity
- gold
- Region
- pahang state in the central gold belt of western malaysia
- Reported Region
- Pahang State in the Central Gold Belt of Western Malaysia
- Ticker
- MMY
Geometry
- Grade
- 3.07
- Grade Unit
- g/t
- Intercept
- 16.5 m
- From
- 64.1 m
- To
- 80.6 m
- Hole Depth
- 100.2 m
Classification
- Program
- mixed
- Sample Type
- drill
- Mining Method
- open_pit
Location
- Easting
- 421258
- Northing
- 471979.4
- CRS
- MRSO Local Grid
- Elevation
- 58.5 m
- Azimuth
- 262 °
- Dip
- -60 °
- Loc. Confidence
- high
QA/QC
- Laboratory
- SGS Malaysia
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- blanks, standards, duplicates, check_assays
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-05-29T00:00:00.000Z
Reasoning: This intercept shows a strong gold grade over a significant width, which is a highly positive result and indicates good mineralization continuity.
Negative factors
- Apparent Width Only
Evidence · table
“3.07g/t Au”
Context: 16.5
Rejected tags
Rejected tags — excluded from scoring because their label or evidence could not be verified.
Apparent Width OnlyRejected · negative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Reason: The document explicitly states that reported intervals are downhole lengths and do not represent true widths.
Evidence · text
“The reported intervals are downhole lengths and do not represent true widths. True widths will be determined once geological modelling has been completed.”
MBRDD627Selinsing Gold Mine · goldGrade: 4.68Grade Unit: g/tIntercept: 10.1 mView all detailsHide details
Identity
- Hole ID
- MBRDD627
- Project
- Selinsing Gold Mine
- Commodity
- gold
- Region
- pahang state in the central gold belt of western malaysia
- Reported Region
- Pahang State in the Central Gold Belt of Western Malaysia
- Ticker
- MMY
Geometry
- Grade
- 4.68
- Grade Unit
- g/t
- Intercept
- 10.1 m
- From
- 63.7 m
- To
- 73.8 m
- Hole Depth
- 100.5 m
Classification
- Program
- mixed
- Sample Type
- drill
- Mining Method
- open_pit
Location
- Easting
- 421259.5
- Northing
- 471960.2
- CRS
- MRSO Local Grid
- Elevation
- 58.4 m
- Azimuth
- 262 °
- Dip
- -60 °
- Loc. Confidence
- high
QA/QC
- Laboratory
- SGS Malaysia
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- blanks, standards, duplicates, check_assays
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-05-29T00:00:00.000Z
Reasoning: This intercept shows a strong gold grade over a significant width, which is a highly positive result and indicates good mineralization continuity.
Negative factors
- Apparent Width Only
Evidence · table
“4.68g/t Au”
Context: 10.1
Rejected tags
Rejected tags — excluded from scoring because their label or evidence could not be verified.
Apparent Width OnlyRejected · negative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Reason: The document explicitly states that reported intervals are downhole lengths and do not represent true widths.
Evidence · text
“The reported intervals are downhole lengths and do not represent true widths. True widths will be determined once geological modelling has been completed.”
MBRDD627Selinsing Gold Mine · goldGrade: 2.47Grade Unit: g/tIntercept: 3.4 mView all detailsHide details
Identity
- Hole ID
- MBRDD627
- Project
- Selinsing Gold Mine
- Commodity
- gold
- Region
- pahang state in the central gold belt of western malaysia
- Reported Region
- Pahang State in the Central Gold Belt of Western Malaysia
- Ticker
- MMY
Geometry
- Grade
- 2.47
- Grade Unit
- g/t
- Intercept
- 3.4 m
- From
- 84.7 m
- To
- 88.1 m
- Hole Depth
- 100.5 m
Classification
- Program
- mixed
- Sample Type
- drill
- Mining Method
- open_pit
Location
- Easting
- 421259.5
- Northing
- 471960.2
- CRS
- MRSO Local Grid
- Elevation
- 58.4 m
- Azimuth
- 262 °
- Dip
- -60 °
- Loc. Confidence
- high
QA/QC
- Laboratory
- SGS Malaysia
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- blanks, standards, duplicates, check_assays
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-05-29T00:00:00.000Z
Reasoning: This intercept shows a strong gold grade over a moderate width, which is a positive result.
Negative factors
- Apparent Width Only
Evidence · table
“2.47g/t Au”
Context: 3.4
Rejected tags
Rejected tags — excluded from scoring because their label or evidence could not be verified.
Apparent Width OnlyRejected · negative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Reason: The document explicitly states that reported intervals are downhole lengths and do not represent true widths.
Evidence · text
“The reported intervals are downhole lengths and do not represent true widths. True widths will be determined once geological modelling has been completed.”
MBRDD627Selinsing Gold Mine · goldGrade: 0.43Grade Unit: g/tIntercept: 1.6 mView all detailsHide details
Identity
- Hole ID
- MBRDD627
- Project
- Selinsing Gold Mine
- Commodity
- gold
- Region
- pahang state in the central gold belt of western malaysia
- Reported Region
- Pahang State in the Central Gold Belt of Western Malaysia
- Ticker
- MMY
Geometry
- Grade
- 0.43
- Grade Unit
- g/t
- Intercept
- 1.6 m
- From
- 91.2 m
- To
- 92.8 m
- Hole Depth
- 100.5 m
Classification
- Program
- mixed
- Sample Type
- drill
- Mining Method
- open_pit
Location
- Easting
- 421259.5
- Northing
- 471960.2
- CRS
- MRSO Local Grid
- Elevation
- 58.4 m
- Azimuth
- 262 °
- Dip
- -60 °
- Loc. Confidence
- high
QA/QC
- Laboratory
- SGS Malaysia
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- blanks, standards, duplicates, check_assays
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-05-29T00:00:00.000Z
Reasoning: This intercept shows weak gold grade over a very narrow width, which is not highly material but contributes to the overall understanding of the deposit.
Negative factors
- Apparent Width Only
Evidence · table
“0.43g/t Au”
Context: 1.6
Rejected tags
Rejected tags — excluded from scoring because their label or evidence could not be verified.
Apparent Width OnlyRejected · negative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Reason: The document explicitly states that reported intervals are downhole lengths and do not represent true widths.
Evidence · text
“The reported intervals are downhole lengths and do not represent true widths. True widths will be determined once geological modelling has been completed.”
MBRDD628Selinsing Gold Mine · goldGrade: 0.55Grade Unit: g/tIntercept: 1.5 mView all detailsHide details
Identity
- Hole ID
- MBRDD628
- Project
- Selinsing Gold Mine
- Commodity
- gold
- Region
- pahang state in the central gold belt of western malaysia
- Reported Region
- Pahang State in the Central Gold Belt of Western Malaysia
- Ticker
- MMY
Geometry
- Grade
- 0.55
- Grade Unit
- g/t
- Intercept
- 1.5 m
- From
- 2.4 m
- To
- 3.9 m
- Hole Depth
- 190.4 m
Classification
- Program
- mixed
- Sample Type
- drill
- Mining Method
- open_pit
Location
- Easting
- 421383.4
- Northing
- 471595.5
- CRS
- MRSO Local Grid
- Elevation
- 102.9 m
- Azimuth
- 262 °
- Dip
- -60 °
- Loc. Confidence
- high
QA/QC
- Laboratory
- SGS Malaysia
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- blanks, standards, duplicates, check_assays
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-05-29T00:00:00.000Z
Reasoning: This intercept shows weak gold grade over a very narrow width, which is not highly material but contributes to the overall understanding of the deposit.
Negative factors
- Apparent Width Only
Evidence · table
“0.55g/t Au”
Context: 1.5
Rejected tags
Rejected tags — excluded from scoring because their label or evidence could not be verified.
Apparent Width OnlyRejected · negative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Reason: The document explicitly states that reported intervals are downhole lengths and do not represent true widths.
Evidence · text
“The reported intervals are downhole lengths and do not represent true widths. True widths will be determined once geological modelling has been completed.”
MBRDD628Selinsing Gold Mine · goldGrade: 4.3Grade Unit: g/tIntercept: 0.7 mView all detailsHide details
Identity
- Hole ID
- MBRDD628
- Project
- Selinsing Gold Mine
- Commodity
- gold
- Region
- pahang state in the central gold belt of western malaysia
- Reported Region
- Pahang State in the Central Gold Belt of Western Malaysia
- Ticker
- MMY
Geometry
- Grade
- 4.3
- Grade Unit
- g/t
- Intercept
- 0.7 m
- From
- 58.9 m
- To
- 59.6 m
- Hole Depth
- 190.4 m
Classification
- Program
- mixed
- Sample Type
- drill
- Mining Method
- open_pit
Location
- Easting
- 421383.4
- Northing
- 471595.5
- CRS
- MRSO Local Grid
- Elevation
- 102.9 m
- Azimuth
- 262 °
- Dip
- -60 °
- Loc. Confidence
- high
QA/QC
- Laboratory
- SGS Malaysia
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- blanks, standards, duplicates, check_assays
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-05-29T00:00:00.000Z
Reasoning: This intercept shows a strong gold grade over a very narrow width, which is a positive indicator.
Negative factors
- Apparent Width Only
Evidence · table
“4.3g/t Au”
Context: 0.7
Rejected tags
Rejected tags — excluded from scoring because their label or evidence could not be verified.
Apparent Width OnlyRejected · negative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Reason: The document explicitly states that reported intervals are downhole lengths and do not represent true widths.
Evidence · text
“The reported intervals are downhole lengths and do not represent true widths. True widths will be determined once geological modelling has been completed.”
MBRDD628Selinsing Gold Mine · goldGrade: 1.4Grade Unit: g/tIntercept: 6.2 mView all detailsHide details
Identity
- Hole ID
- MBRDD628
- Project
- Selinsing Gold Mine
- Commodity
- gold
- Region
- pahang state in the central gold belt of western malaysia
- Reported Region
- Pahang State in the Central Gold Belt of Western Malaysia
- Ticker
- MMY
Geometry
- Grade
- 1.4
- Grade Unit
- g/t
- Intercept
- 6.2 m
- From
- 61.6 m
- To
- 67.8 m
- Hole Depth
- 190.4 m
Classification
- Program
- mixed
- Sample Type
- drill
- Mining Method
- open_pit
Location
- Easting
- 421383.4
- Northing
- 471595.5
- CRS
- MRSO Local Grid
- Elevation
- 102.9 m
- Azimuth
- 262 °
- Dip
- -60 °
- Loc. Confidence
- high
QA/QC
- Laboratory
- SGS Malaysia
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- blanks, standards, duplicates, check_assays
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-05-29T00:00:00.000Z
Reasoning: This intercept shows a moderate gold grade over a moderate width, which is a positive indicator within the overall drill program.
Negative factors
- Apparent Width Only
Evidence · table
“1.4g/t Au”
Context: 6.2
Rejected tags
Rejected tags — excluded from scoring because their label or evidence could not be verified.
Apparent Width OnlyRejected · negative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Reason: The document explicitly states that reported intervals are downhole lengths and do not represent true widths.
Evidence · text
“The reported intervals are downhole lengths and do not represent true widths. True widths will be determined once geological modelling has been completed.”
MBRDD628Selinsing Gold Mine · goldGrade: 3.25Grade Unit: g/tIntercept: 0.8 mView all detailsHide details
Identity
- Hole ID
- MBRDD628
- Project
- Selinsing Gold Mine
- Commodity
- gold
- Region
- pahang state in the central gold belt of western malaysia
- Reported Region
- Pahang State in the Central Gold Belt of Western Malaysia
- Ticker
- MMY
Geometry
- Grade
- 3.25
- Grade Unit
- g/t
- Intercept
- 0.8 m
- From
- 68.9 m
- To
- 69.7 m
- Hole Depth
- 190.4 m
Classification
- Program
- mixed
- Sample Type
- drill
- Mining Method
- open_pit
Location
- Easting
- 421383.4
- Northing
- 471595.5
- CRS
- MRSO Local Grid
- Elevation
- 102.9 m
- Azimuth
- 262 °
- Dip
- -60 °
- Loc. Confidence
- high
QA/QC
- Laboratory
- SGS Malaysia
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- blanks, standards, duplicates, check_assays
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-05-29T00:00:00.000Z
Reasoning: This intercept shows a strong gold grade over a very narrow width, which is a positive indicator.
Negative factors
- Apparent Width Only
Evidence · table
“3.25g/t Au”
Context: 0.8
Rejected tags
Rejected tags — excluded from scoring because their label or evidence could not be verified.
Apparent Width OnlyRejected · negative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Reason: The document explicitly states that reported intervals are downhole lengths and do not represent true widths.
Evidence · text
“The reported intervals are downhole lengths and do not represent true widths. True widths will be determined once geological modelling has been completed.”
MBRDD628Selinsing Gold Mine · goldGrade: 5.66Grade Unit: g/tIntercept: 3 mView all detailsHide details
Identity
- Hole ID
- MBRDD628
- Project
- Selinsing Gold Mine
- Commodity
- gold
- Region
- pahang state in the central gold belt of western malaysia
- Reported Region
- Pahang State in the Central Gold Belt of Western Malaysia
- Ticker
- MMY
Geometry
- Grade
- 5.66
- Grade Unit
- g/t
- Intercept
- 3 m
- From
- 78.9 m
- To
- 81.9 m
- Hole Depth
- 190.4 m
Classification
- Program
- mixed
- Sample Type
- drill
- Mining Method
- open_pit
Location
- Easting
- 421383.4
- Northing
- 471595.5
- CRS
- MRSO Local Grid
- Elevation
- 102.9 m
- Azimuth
- 262 °
- Dip
- -60 °
- Loc. Confidence
- high
QA/QC
- Laboratory
- SGS Malaysia
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- blanks, standards, duplicates, check_assays
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-05-29T00:00:00.000Z
Reasoning: This intercept shows an exceptional gold grade over a narrow width, which is a significant positive result.
Negative factors
- Apparent Width Only
Evidence · table
“5.66g/t Au”
Context: 3.0
Rejected tags
Rejected tags — excluded from scoring because their label or evidence could not be verified.
Bonanza InterceptRejected · positive
Exceptionally high-grade zone, well above the deposit-type norm.
Reason: The gold grade of 5.66 g/t exceeds the exceptional threshold of 5 g/t for open-pit mining.
Evidence · table
“5.66g/t Au”
Context: 3.0
Apparent Width OnlyRejected · negative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Reason: The document explicitly states that reported intervals are downhole lengths and do not represent true widths.
Evidence · text
“The reported intervals are downhole lengths and do not represent true widths. True widths will be determined once geological modelling has been completed.”
MBRDD628Selinsing Gold Mine · goldGrade: 13.9Grade Unit: g/tIntercept: 1.1 mView all detailsHide details
Identity
- Hole ID
- MBRDD628
- Project
- Selinsing Gold Mine
- Commodity
- gold
- Region
- pahang state in the central gold belt of western malaysia
- Reported Region
- Pahang State in the Central Gold Belt of Western Malaysia
- Ticker
- MMY
Geometry
- Grade
- 13.9
- Grade Unit
- g/t
- Intercept
- 1.1 m
- From
- 94.3 m
- To
- 95.4 m
- Hole Depth
- 190.4 m
Classification
- Program
- mixed
- Sample Type
- drill
- Mining Method
- open_pit
Location
- Easting
- 421383.4
- Northing
- 471595.5
- CRS
- MRSO Local Grid
- Elevation
- 102.9 m
- Azimuth
- 262 °
- Dip
- -60 °
- Loc. Confidence
- high
QA/QC
- Laboratory
- SGS Malaysia
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- blanks, standards, duplicates, check_assays
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-05-29T00:00:00.000Z
Reasoning: This intercept shows an exceptional gold grade over a narrow width, which is a highly significant positive result.
Negative factors
- Apparent Width Only
Evidence · table
“13.9g/t Au”
Context: 1.1
Rejected tags
Rejected tags — excluded from scoring because their label or evidence could not be verified.
Bonanza InterceptRejected · positive
Exceptionally high-grade zone, well above the deposit-type norm.
Reason: The gold grade of 13.9 g/t exceeds the exceptional threshold of 5 g/t for open-pit mining.
Evidence · table
“13.9g/t Au”
Context: 1.1
Apparent Width OnlyRejected · negative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Reason: The document explicitly states that reported intervals are downhole lengths and do not represent true widths.
Evidence · text
“The reported intervals are downhole lengths and do not represent true widths. True widths will be determined once geological modelling has been completed.”
MBRDD628Selinsing Gold Mine · goldGrade: 1.68Grade Unit: g/tIntercept: 5.8 mView all detailsHide details
Identity
- Hole ID
- MBRDD628
- Project
- Selinsing Gold Mine
- Commodity
- gold
- Region
- pahang state in the central gold belt of western malaysia
- Reported Region
- Pahang State in the Central Gold Belt of Western Malaysia
- Ticker
- MMY
Geometry
- Grade
- 1.68
- Grade Unit
- g/t
- Intercept
- 5.8 m
- From
- 113.4 m
- To
- 119.2 m
- Hole Depth
- 190.4 m
Classification
- Program
- mixed
- Sample Type
- drill
- Mining Method
- open_pit
Location
- Easting
- 421383.4
- Northing
- 471595.5
- CRS
- MRSO Local Grid
- Elevation
- 102.9 m
- Azimuth
- 262 °
- Dip
- -60 °
- Loc. Confidence
- high
QA/QC
- Laboratory
- SGS Malaysia
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- blanks, standards, duplicates, check_assays
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-05-29T00:00:00.000Z
Reasoning: This intercept shows a moderate gold grade over a moderate width, which is a positive indicator within the overall drill program.
Negative factors
- Apparent Width Only
Evidence · table
“1.68g/t Au”
Context: 5.8
Rejected tags
Rejected tags — excluded from scoring because their label or evidence could not be verified.
Apparent Width OnlyRejected · negative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Reason: The document explicitly states that reported intervals are downhole lengths and do not represent true widths.
Evidence · text
“The reported intervals are downhole lengths and do not represent true widths. True widths will be determined once geological modelling has been completed.”
MBRDD629Selinsing Gold Mine · goldGrade: 0.22Grade Unit: g/tIntercept: 2 mView all detailsHide details
Identity
- Hole ID
- MBRDD629
- Project
- Selinsing Gold Mine
- Commodity
- gold
- Region
- pahang state in the central gold belt of western malaysia
- Reported Region
- Pahang State in the Central Gold Belt of Western Malaysia
- Ticker
- MMY
Geometry
- Grade
- 0.22
- Grade Unit
- g/t
- Intercept
- 2 m
- From
- 35.5 m
- To
- 37.5 m
- Hole Depth
- 80.3 m
Classification
- Program
- mixed
- Sample Type
- drill
- Mining Method
- open_pit
Location
- Easting
- 421247.7
- Northing
- 471978.5
- CRS
- MRSO Local Grid
- Elevation
- 58.6 m
- Azimuth
- 262 °
- Dip
- -60 °
- Loc. Confidence
- high
QA/QC
- Laboratory
- SGS Malaysia
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- blanks, standards, duplicates, check_assays
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-05-29T00:00:00.000Z
Reasoning: This intercept shows weak gold grade over a narrow width, which is not highly material but contributes to the overall understanding of the deposit.
Negative factors
- Apparent Width Only
Evidence · table
“0.22g/t Au”
Context: 2.0
Rejected tags
Rejected tags — excluded from scoring because their label or evidence could not be verified.
Apparent Width OnlyRejected · negative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Reason: The document explicitly states that reported intervals are downhole lengths and do not represent true widths.
Evidence · text
“The reported intervals are downhole lengths and do not represent true widths. True widths will be determined once geological modelling has been completed.”
MBRDD629Selinsing Gold Mine · goldGrade: 3.1Grade Unit: g/tIntercept: 7 mView all detailsHide details
Identity
- Hole ID
- MBRDD629
- Project
- Selinsing Gold Mine
- Commodity
- gold
- Region
- pahang state in the central gold belt of western malaysia
- Reported Region
- Pahang State in the Central Gold Belt of Western Malaysia
- Ticker
- MMY
Geometry
- Grade
- 3.1
- Grade Unit
- g/t
- Intercept
- 7 m
- From
- 39 m
- To
- 46 m
- Hole Depth
- 80.3 m
Classification
- Program
- mixed
- Sample Type
- drill
- Mining Method
- open_pit
Location
- Easting
- 421247.7
- Northing
- 471978.5
- CRS
- MRSO Local Grid
- Elevation
- 58.6 m
- Azimuth
- 262 °
- Dip
- -60 °
- Loc. Confidence
- high
QA/QC
- Laboratory
- SGS Malaysia
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- blanks, standards, duplicates, check_assays
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-05-29T00:00:00.000Z
Reasoning: This intercept shows a strong gold grade over a moderate width, which is a significant positive result.
Negative factors
- Apparent Width Only
Evidence · table
“3.10g/t Au”
Context: 7.0
Rejected tags
Rejected tags — excluded from scoring because their label or evidence could not be verified.
Apparent Width OnlyRejected · negative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Reason: The document explicitly states that reported intervals are downhole lengths and do not represent true widths.
Evidence · text
“The reported intervals are downhole lengths and do not represent true widths. True widths will be determined once geological modelling has been completed.”
MBRDD629Selinsing Gold Mine · goldGrade: 0.29Grade Unit: g/tIntercept: 0.5 mView all detailsHide details
Identity
- Hole ID
- MBRDD629
- Project
- Selinsing Gold Mine
- Commodity
- gold
- Region
- pahang state in the central gold belt of western malaysia
- Reported Region
- Pahang State in the Central Gold Belt of Western Malaysia
- Ticker
- MMY
Geometry
- Grade
- 0.29
- Grade Unit
- g/t
- Intercept
- 0.5 m
- From
- 54.7 m
- To
- 55.2 m
- Hole Depth
- 80.3 m
Classification
- Program
- mixed
- Sample Type
- drill
- Mining Method
- open_pit
Location
- Easting
- 421247.7
- Northing
- 471978.5
- CRS
- MRSO Local Grid
- Elevation
- 58.6 m
- Azimuth
- 262 °
- Dip
- -60 °
- Loc. Confidence
- high
QA/QC
- Laboratory
- SGS Malaysia
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- blanks, standards, duplicates, check_assays
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-05-29T00:00:00.000Z
Reasoning: This intercept shows weak gold grade over a very narrow width, which is not highly material but contributes to the overall understanding of the deposit.
Negative factors
- Apparent Width Only
Evidence · table
“0.29g/t Au”
Context: 0.5
Rejected tags
Rejected tags — excluded from scoring because their label or evidence could not be verified.
Apparent Width OnlyRejected · negative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Reason: The document explicitly states that reported intervals are downhole lengths and do not represent true widths.
Evidence · text
“The reported intervals are downhole lengths and do not represent true widths. True widths will be determined once geological modelling has been completed.”
MBRDD629Selinsing Gold Mine · goldGrade: 0.32Grade Unit: g/tIntercept: 2.6 mView all detailsHide details
Identity
- Hole ID
- MBRDD629
- Project
- Selinsing Gold Mine
- Commodity
- gold
- Region
- pahang state in the central gold belt of western malaysia
- Reported Region
- Pahang State in the Central Gold Belt of Western Malaysia
- Ticker
- MMY
Geometry
- Grade
- 0.32
- Grade Unit
- g/t
- Intercept
- 2.6 m
- From
- 61.8 m
- To
- 64.2 m
- Hole Depth
- 80.3 m
Classification
- Program
- mixed
- Sample Type
- drill
- Mining Method
- open_pit
Location
- Easting
- 421247.7
- Northing
- 471978.5
- CRS
- MRSO Local Grid
- Elevation
- 58.6 m
- Azimuth
- 262 °
- Dip
- -60 °
- Loc. Confidence
- high
QA/QC
- Laboratory
- SGS Malaysia
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- blanks, standards, duplicates, check_assays
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-05-29T00:00:00.000Z
Reasoning: This intercept shows weak gold grade over a narrow width, which is not highly material but contributes to the overall understanding of the deposit.
Negative factors
- Apparent Width Only
Evidence · table
“0.32g/t Au”
Context: 2.6
Rejected tags
Rejected tags — excluded from scoring because their label or evidence could not be verified.
Apparent Width OnlyRejected · negative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Reason: The document explicitly states that reported intervals are downhole lengths and do not represent true widths.
Evidence · text
“The reported intervals are downhole lengths and do not represent true widths. True widths will be determined once geological modelling has been completed.”
MBRDD630Selinsing Gold Mine · goldGrade: 2.17Grade Unit: g/tIntercept: 1.7 mView all detailsHide details
Identity
- Hole ID
- MBRDD630
- Project
- Selinsing Gold Mine
- Commodity
- gold
- Region
- pahang state in the central gold belt of western malaysia
- Reported Region
- Pahang State in the Central Gold Belt of Western Malaysia
- Ticker
- MMY
Geometry
- Grade
- 2.17
- Grade Unit
- g/t
- Intercept
- 1.7 m
- From
- 21.3 m
- To
- 23 m
- Hole Depth
- 101 m
Classification
- Program
- mixed
- Sample Type
- drill
- Mining Method
- open_pit
Location
- Easting
- 421272.3
- Northing
- 471941.6
- CRS
- MRSO Local Grid
- Elevation
- 58.6 m
- Azimuth
- 262 °
- Dip
- -60 °
- Loc. Confidence
- high
QA/QC
- Laboratory
- SGS Malaysia
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- blanks, standards, duplicates, check_assays
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-05-29T00:00:00.000Z
Reasoning: This intercept shows a strong gold grade over a narrow width, which is a positive result.
Negative factors
- Apparent Width Only
Evidence · table
“2.17g/t Au”
Context: 1.7
Rejected tags
Rejected tags — excluded from scoring because their label or evidence could not be verified.
Apparent Width OnlyRejected · negative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Reason: The document explicitly states that reported intervals are downhole lengths and do not represent true widths.
Evidence · text
“The reported intervals are downhole lengths and do not represent true widths. True widths will be determined once geological modelling has been completed.”
MBRDD630Selinsing Gold Mine · goldGrade: 3.49Grade Unit: g/tIntercept: 5.3 mView all detailsHide details
Identity
- Hole ID
- MBRDD630
- Project
- Selinsing Gold Mine
- Commodity
- gold
- Region
- pahang state in the central gold belt of western malaysia
- Reported Region
- Pahang State in the Central Gold Belt of Western Malaysia
- Ticker
- MMY
Geometry
- Grade
- 3.49
- Grade Unit
- g/t
- Intercept
- 5.3 m
- From
- 59 m
- To
- 64.3 m
- Hole Depth
- 101 m
Classification
- Program
- mixed
- Sample Type
- drill
- Mining Method
- open_pit
Location
- Easting
- 421272.3
- Northing
- 471941.6
- CRS
- MRSO Local Grid
- Elevation
- 58.6 m
- Azimuth
- 262 °
- Dip
- -60 °
- Loc. Confidence
- high
QA/QC
- Laboratory
- SGS Malaysia
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- blanks, standards, duplicates, check_assays
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-05-29T00:00:00.000Z
Reasoning: This intercept shows a strong gold grade over a moderate width, which is a significant positive result.
Negative factors
- Apparent Width Only
Evidence · table
“3.49g/t Au”
Context: 5.3
Rejected tags
Rejected tags — excluded from scoring because their label or evidence could not be verified.
Apparent Width OnlyRejected · negative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Reason: The document explicitly states that reported intervals are downhole lengths and do not represent true widths.
Evidence · text
“The reported intervals are downhole lengths and do not represent true widths. True widths will be determined once geological modelling has been completed.”
MBRDD630Selinsing Gold Mine · goldGrade: 2.64Grade Unit: g/tIntercept: 6 mView all detailsHide details
Identity
- Hole ID
- MBRDD630
- Project
- Selinsing Gold Mine
- Commodity
- gold
- Region
- pahang state in the central gold belt of western malaysia
- Reported Region
- Pahang State in the Central Gold Belt of Western Malaysia
- Ticker
- MMY
Geometry
- Grade
- 2.64
- Grade Unit
- g/t
- Intercept
- 6 m
- From
- 78.5 m
- To
- 84.5 m
- Hole Depth
- 101 m
Classification
- Program
- mixed
- Sample Type
- drill
- Mining Method
- open_pit
Location
- Easting
- 421272.3
- Northing
- 471941.6
- CRS
- MRSO Local Grid
- Elevation
- 58.6 m
- Azimuth
- 262 °
- Dip
- -60 °
- Loc. Confidence
- high
QA/QC
- Laboratory
- SGS Malaysia
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- blanks, standards, duplicates, check_assays
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-05-29T00:00:00.000Z
Reasoning: This intercept shows a strong gold grade over a moderate width, which is a positive result.
Negative factors
- Apparent Width Only
Evidence · table
“2.64g/t Au”
Context: 6.0
Rejected tags
Rejected tags — excluded from scoring because their label or evidence could not be verified.
Apparent Width OnlyRejected · negative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Reason: The document explicitly states that reported intervals are downhole lengths and do not represent true widths.
Evidence · text
“The reported intervals are downhole lengths and do not represent true widths. True widths will be determined once geological modelling has been completed.”
MBRDD631Selinsing Gold Mine · goldGrade: 6.12Grade Unit: g/tIntercept: 6.1 mView all detailsHide details
Identity
- Hole ID
- MBRDD631
- Project
- Selinsing Gold Mine
- Commodity
- gold
- Region
- pahang state in the central gold belt of western malaysia
- Reported Region
- Pahang State in the Central Gold Belt of Western Malaysia
- Ticker
- MMY
Geometry
- Grade
- 6.12
- Grade Unit
- g/t
- Intercept
- 6.1 m
- From
- 44.2 m
- To
- 50.3 m
- Hole Depth
- 80.2 m
Classification
- Program
- mixed
- Sample Type
- drill
- Mining Method
- open_pit
Location
- Easting
- 421243.2
- Northing
- 471958
- CRS
- MRSO Local Grid
- Elevation
- 58.3 m
- Azimuth
- 262 °
- Dip
- -60 °
- Loc. Confidence
- high
QA/QC
- Laboratory
- SGS Malaysia
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- blanks, standards, duplicates, check_assays
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-05-29T00:00:00.000Z
Reasoning: This intercept shows an exceptional gold grade over a moderate width, which is a significant positive result.
Negative factors
- Apparent Width Only
Evidence · table
“6.12g/t Au”
Context: 6.1
Rejected tags
Rejected tags — excluded from scoring because their label or evidence could not be verified.
Bonanza InterceptRejected · positive
Exceptionally high-grade zone, well above the deposit-type norm.
Reason: The gold grade of 6.12 g/t exceeds the exceptional threshold of 5 g/t for open-pit mining.
Evidence · table
“6.12g/t Au”
Context: 6.1
Apparent Width OnlyRejected · negative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Reason: The document explicitly states that reported intervals are downhole lengths and do not represent true widths.
Evidence · text
“The reported intervals are downhole lengths and do not represent true widths. True widths will be determined once geological modelling has been completed.”
MBRDD631Selinsing Gold Mine · goldGrade: 0.5Grade Unit: g/tIntercept: 4.6 mView all detailsHide details
Identity
- Hole ID
- MBRDD631
- Project
- Selinsing Gold Mine
- Commodity
- gold
- Region
- pahang state in the central gold belt of western malaysia
- Reported Region
- Pahang State in the Central Gold Belt of Western Malaysia
- Ticker
- MMY
Geometry
- Grade
- 0.5
- Grade Unit
- g/t
- Intercept
- 4.6 m
- From
- 54.4 m
- To
- 59 m
- Hole Depth
- 80.2 m
Classification
- Program
- mixed
- Sample Type
- drill
- Mining Method
- open_pit
Location
- Easting
- 421243.2
- Northing
- 471958
- CRS
- MRSO Local Grid
- Elevation
- 58.3 m
- Azimuth
- 262 °
- Dip
- -60 °
- Loc. Confidence
- high
QA/QC
- Laboratory
- SGS Malaysia
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- blanks, standards, duplicates, check_assays
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-05-29T00:00:00.000Z
Reasoning: This intercept shows weak gold grade over a moderate width, which is not highly material but contributes to the overall understanding of the deposit.
Negative factors
- Apparent Width Only
Evidence · table
“0.50g/t Au”
Context: 4.6
Rejected tags
Rejected tags — excluded from scoring because their label or evidence could not be verified.
Apparent Width OnlyRejected · negative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Reason: The document explicitly states that reported intervals are downhole lengths and do not represent true widths.
Evidence · text
“The reported intervals are downhole lengths and do not represent true widths. True widths will be determined once geological modelling has been completed.”
MBRRC632Selinsing Gold Mine · goldGrade: 1.73Grade Unit: g/tIntercept: 2.2 mView all detailsHide details
Identity
- Hole ID
- MBRRC632
- Project
- Selinsing Gold Mine
- Commodity
- gold
- Region
- pahang state in the central gold belt of western malaysia
- Reported Region
- Pahang State in the Central Gold Belt of Western Malaysia
- Ticker
- MMY
Geometry
- Grade
- 1.73
- Grade Unit
- g/t
- Intercept
- 2.2 m
- From
- 0 m
- To
- 2.2 m
- Hole Depth
- 110.2 m
Classification
- Program
- mixed
- Sample Type
- drill
- Mining Method
- open_pit
Location
- Easting
- 421294.3
- Northing
- 471905.7
- CRS
- MRSO Local Grid
- Elevation
- 58.7 m
- Azimuth
- 262 °
- Dip
- -70 °
- Loc. Confidence
- high
QA/QC
- Laboratory
- SGS Malaysia
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- blanks, standards, duplicates, check_assays
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-05-29T00:00:00.000Z
Reasoning: This intercept shows a moderate gold grade over a narrow width, which is a positive indicator within the overall drill program.
Negative factors
- Apparent Width Only
Evidence · table
“1.73g/t Au”
Context: 2.2
Rejected tags
Rejected tags — excluded from scoring because their label or evidence could not be verified.
Apparent Width OnlyRejected · negative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Reason: The document explicitly states that reported intervals are downhole lengths and do not represent true widths.
Evidence · text
“The reported intervals are downhole lengths and do not represent true widths. True widths will be determined once geological modelling has been completed.”
MBRRC632Selinsing Gold Mine · goldGrade: 2Grade Unit: g/tIntercept: 3 mView all detailsHide details
Identity
- Hole ID
- MBRRC632
- Project
- Selinsing Gold Mine
- Commodity
- gold
- Region
- pahang state in the central gold belt of western malaysia
- Reported Region
- Pahang State in the Central Gold Belt of Western Malaysia
- Ticker
- MMY
Geometry
- Grade
- 2
- Grade Unit
- g/t
- Intercept
- 3 m
- From
- 32.2 m
- To
- 35.2 m
- Hole Depth
- 110.2 m
Classification
- Program
- mixed
- Sample Type
- drill
- Mining Method
- open_pit
Location
- Easting
- 421294.3
- Northing
- 471905.7
- CRS
- MRSO Local Grid
- Elevation
- 58.7 m
- Azimuth
- 262 °
- Dip
- -70 °
- Loc. Confidence
- high
QA/QC
- Laboratory
- SGS Malaysia
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- blanks, standards, duplicates, check_assays
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-05-29T00:00:00.000Z
Reasoning: This intercept shows a strong gold grade over a narrow width, which is a positive result.
Negative factors
- Apparent Width Only
Evidence · table
“2.0g/t Au”
Context: 3.0
Rejected tags
Rejected tags — excluded from scoring because their label or evidence could not be verified.
Apparent Width OnlyRejected · negative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Reason: The document explicitly states that reported intervals are downhole lengths and do not represent true widths.
Evidence · text
“The reported intervals are downhole lengths and do not represent true widths. True widths will be determined once geological modelling has been completed.”
MBRRC632Selinsing Gold Mine · goldGrade: 2.61Grade Unit: g/tIntercept: 15.5 mView all detailsHide details
Identity
- Hole ID
- MBRRC632
- Project
- Selinsing Gold Mine
- Commodity
- gold
- Region
- pahang state in the central gold belt of western malaysia
- Reported Region
- Pahang State in the Central Gold Belt of Western Malaysia
- Ticker
- MMY
Geometry
- Grade
- 2.61
- Grade Unit
- g/t
- Intercept
- 15.5 m
- From
- 67.7 m
- To
- 83.2 m
- Hole Depth
- 110.2 m
Classification
- Program
- mixed
- Sample Type
- drill
- Group ID
- MBRRC632:67.7-83.2
- Mining Method
- open_pit
Location
- Easting
- 421294.3
- Northing
- 471905.7
- CRS
- MRSO Local Grid
- Elevation
- 58.7 m
- Azimuth
- 262 °
- Dip
- -70 °
- Loc. Confidence
- high
QA/QC
- Laboratory
- SGS Malaysia
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- blanks, standards, duplicates, check_assays
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-05-29T00:00:00.000Z
Reasoning: This intercept shows a strong gold grade over a significant width, which is a highly positive result and indicates good mineralization continuity.
Negative factors
- Apparent Width Only
Evidence · table
“2.61g/t Au”
Context: 15.5
Rejected tags
Rejected tags — excluded from scoring because their label or evidence could not be verified.
Apparent Width OnlyRejected · negative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Reason: The document explicitly states that reported intervals are downhole lengths and do not represent true widths.
Evidence · text
“The reported intervals are downhole lengths and do not represent true widths. True widths will be determined once geological modelling has been completed.”
MBRRC632Selinsing Gold Mine · goldGrade: 5.62Grade Unit: g/tIntercept: 6 mView all detailsHide details
Identity
- Hole ID
- MBRRC632
- Project
- Selinsing Gold Mine
- Commodity
- gold
- Region
- pahang state in the central gold belt of western malaysia
- Reported Region
- Pahang State in the Central Gold Belt of Western Malaysia
- Ticker
- MMY
Geometry
- Grade
- 5.62
- Grade Unit
- g/t
- Intercept
- 6 m
- From
- 72.7 m
- To
- 78.7 m
- Hole Depth
- 110.2 m
Classification
- Program
- mixed
- Sample Type
- drill
- Group ID
- MBRRC632:67.7-83.2
- Mining Method
- open_pit
Location
- Easting
- 421294.3
- Northing
- 471905.7
- CRS
- MRSO Local Grid
- Elevation
- 58.7 m
- Azimuth
- 262 °
- Dip
- -70 °
- Loc. Confidence
- high
QA/QC
- Laboratory
- SGS Malaysia
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- blanks, standards, duplicates, check_assays
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-05-29T00:00:00.000Z
Reasoning: This sub-interval shows an exceptional gold grade over a moderate width, which is a significant positive result within the broader intercept.
Negative factors
- Apparent Width Only
Evidence · table
“5.62g/t Au”
Context: 6m
Rejected tags
Rejected tags — excluded from scoring because their label or evidence could not be verified.
Bonanza InterceptRejected · positive
Exceptionally high-grade zone, well above the deposit-type norm.
Reason: The gold grade of 5.62 g/t exceeds the exceptional threshold of 5 g/t for open-pit mining.
Evidence · table
“5.62g/t Au”
Context: 6m
Apparent Width OnlyRejected · negative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Reason: The document explicitly states that reported intervals are downhole lengths and do not represent true widths.
Evidence · text
“The reported intervals are downhole lengths and do not represent true widths. True widths will be determined once geological modelling has been completed.”
MBRDD633Selinsing Gold Mine · goldGrade: 2.14Grade Unit: g/tIntercept: 1.3 mView all detailsHide details
Identity
- Hole ID
- MBRDD633
- Project
- Selinsing Gold Mine
- Commodity
- gold
- Region
- pahang state in the central gold belt of western malaysia
- Reported Region
- Pahang State in the Central Gold Belt of Western Malaysia
- Ticker
- MMY
Geometry
- Grade
- 2.14
- Grade Unit
- g/t
- Intercept
- 1.3 m
- From
- 16.1 m
- To
- 17.4 m
- Hole Depth
- 80.4 m
Classification
- Program
- mixed
- Sample Type
- drill
- Mining Method
- open_pit
Location
- Easting
- 421259.3
- Northing
- 472096.5
- CRS
- MRSO Local Grid
- Elevation
- 59.1 m
- Azimuth
- 72 °
- Dip
- -90 °
- Loc. Confidence
- high
QA/QC
- Laboratory
- SGS Malaysia
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- blanks, standards, duplicates, check_assays
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-05-29T00:00:00.000Z
Reasoning: This intercept shows a strong gold grade over a narrow width, which is a positive result.
Negative factors
- Apparent Width Only
Evidence · table
“2.14g/t Au”
Context: 1.3
Rejected tags
Rejected tags — excluded from scoring because their label or evidence could not be verified.
Apparent Width OnlyRejected · negative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Reason: The document explicitly states that reported intervals are downhole lengths and do not represent true widths.
Evidence · text
“The reported intervals are downhole lengths and do not represent true widths. True widths will be determined once geological modelling has been completed.”
MBRDD635Selinsing Gold Mine · goldGrade: 1.27Grade Unit: g/tIntercept: 8.1 mView all detailsHide details
Identity
- Hole ID
- MBRDD635
- Project
- Selinsing Gold Mine
- Commodity
- gold
- Region
- pahang state in the central gold belt of western malaysia
- Reported Region
- Pahang State in the Central Gold Belt of Western Malaysia
- Ticker
- MMY
Geometry
- Grade
- 1.27
- Grade Unit
- g/t
- Intercept
- 8.1 m
- From
- 6.9 m
- To
- 15 m
- Hole Depth
- 120 m
Classification
- Program
- mixed
- Sample Type
- drill
- Mining Method
- open_pit
Location
- Easting
- 421272
- Northing
- 472022.9
- CRS
- MRSO Local Grid
- Elevation
- 58.5 m
- Azimuth
- 72 °
- Dip
- -90 °
- Loc. Confidence
- high
QA/QC
- Laboratory
- SGS Malaysia
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- blanks, standards, duplicates, check_assays
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-05-29T00:00:00.000Z
Reasoning: This intercept shows a moderate gold grade over a moderate width, which is a positive indicator within the overall drill program.
Negative factors
- Apparent Width Only
Evidence · table
“1.27g/t Au”
Context: 8.1
Rejected tags
Rejected tags — excluded from scoring because their label or evidence could not be verified.
Apparent Width OnlyRejected · negative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Reason: The document explicitly states that reported intervals are downhole lengths and do not represent true widths.
Evidence · text
“The reported intervals are downhole lengths and do not represent true widths. True widths will be determined once geological modelling has been completed.”
MBRDD635Selinsing Gold Mine · goldGrade: 7.53Grade Unit: g/tIntercept: 3 mView all detailsHide details
Identity
- Hole ID
- MBRDD635
- Project
- Selinsing Gold Mine
- Commodity
- gold
- Region
- pahang state in the central gold belt of western malaysia
- Reported Region
- Pahang State in the Central Gold Belt of Western Malaysia
- Ticker
- MMY
Geometry
- Grade
- 7.53
- Grade Unit
- g/t
- Intercept
- 3 m
- From
- 79.5 m
- To
- 82.5 m
- Hole Depth
- 120 m
Classification
- Program
- mixed
- Sample Type
- drill
- Mining Method
- open_pit
Location
- Easting
- 421272
- Northing
- 472022.9
- CRS
- MRSO Local Grid
- Elevation
- 58.5 m
- Azimuth
- 72 °
- Dip
- -90 °
- Loc. Confidence
- high
QA/QC
- Laboratory
- SGS Malaysia
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- blanks, standards, duplicates, check_assays
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-05-29T00:00:00.000Z
Reasoning: This intercept shows an exceptional gold grade over a narrow width, which is a significant positive result.
Negative factors
- Apparent Width Only
Evidence · table
“7.53g/t Au”
Context: 3.0
Rejected tags
Rejected tags — excluded from scoring because their label or evidence could not be verified.
Bonanza InterceptRejected · positive
Exceptionally high-grade zone, well above the deposit-type norm.
Reason: The gold grade of 7.53 g/t exceeds the exceptional threshold of 5 g/t for open-pit mining.
Evidence · table
“7.53g/t Au”
Context: 3.0
Apparent Width OnlyRejected · negative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Reason: The document explicitly states that reported intervals are downhole lengths and do not represent true widths.
Evidence · text
“The reported intervals are downhole lengths and do not represent true widths. True widths will be determined once geological modelling has been completed.”
MBRDD635Selinsing Gold Mine · goldGrade: 0.48Grade Unit: g/tIntercept: 0.7 mView all detailsHide details
Identity
- Hole ID
- MBRDD635
- Project
- Selinsing Gold Mine
- Commodity
- gold
- Region
- pahang state in the central gold belt of western malaysia
- Reported Region
- Pahang State in the Central Gold Belt of Western Malaysia
- Ticker
- MMY
Geometry
- Grade
- 0.48
- Grade Unit
- g/t
- Intercept
- 0.7 m
- From
- 85.5 m
- To
- 86.2 m
- Hole Depth
- 120 m
Classification
- Program
- mixed
- Sample Type
- drill
- Mining Method
- open_pit
Location
- Easting
- 421272
- Northing
- 472022.9
- CRS
- MRSO Local Grid
- Elevation
- 58.5 m
- Azimuth
- 72 °
- Dip
- -90 °
- Loc. Confidence
- high
QA/QC
- Laboratory
- SGS Malaysia
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- blanks, standards, duplicates, check_assays
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-05-29T00:00:00.000Z
Reasoning: This intercept shows weak gold grade over a very narrow width, which is not highly material but contributes to the overall understanding of the deposit.
Negative factors
- Apparent Width Only
Evidence · table
“0.48g/t Au”
Context: 0.7
Rejected tags
Rejected tags — excluded from scoring because their label or evidence could not be verified.
Apparent Width OnlyRejected · negative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Reason: The document explicitly states that reported intervals are downhole lengths and do not represent true widths.
Evidence · text
“The reported intervals are downhole lengths and do not represent true widths. True widths will be determined once geological modelling has been completed.”
MBRDD635Selinsing Gold Mine · goldGrade: 2.95Grade Unit: g/tIntercept: 3 mView all detailsHide details
Identity
- Hole ID
- MBRDD635
- Project
- Selinsing Gold Mine
- Commodity
- gold
- Region
- pahang state in the central gold belt of western malaysia
- Reported Region
- Pahang State in the Central Gold Belt of Western Malaysia
- Ticker
- MMY
Geometry
- Grade
- 2.95
- Grade Unit
- g/t
- Intercept
- 3 m
- From
- 88.5 m
- To
- 91.5 m
- Hole Depth
- 120 m
Classification
- Program
- mixed
- Sample Type
- drill
- Mining Method
- open_pit
Location
- Easting
- 421272
- Northing
- 472022.9
- CRS
- MRSO Local Grid
- Elevation
- 58.5 m
- Azimuth
- 72 °
- Dip
- -90 °
- Loc. Confidence
- high
QA/QC
- Laboratory
- SGS Malaysia
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- blanks, standards, duplicates, check_assays
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-05-29T00:00:00.000Z
Reasoning: This intercept shows a strong gold grade over a narrow width, which is a positive result.
Negative factors
- Apparent Width Only
Evidence · table
“2.95g/t Au”
Context: 3.0
Rejected tags
Rejected tags — excluded from scoring because their label or evidence could not be verified.
Apparent Width OnlyRejected · negative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Reason: The document explicitly states that reported intervals are downhole lengths and do not represent true widths.
Evidence · text
“The reported intervals are downhole lengths and do not represent true widths. True widths will be determined once geological modelling has been completed.”
MBRDD635Selinsing Gold Mine · goldGrade: 1.52Grade Unit: g/tIntercept: 12.5 mView all detailsHide details
Identity
- Hole ID
- MBRDD635
- Project
- Selinsing Gold Mine
- Commodity
- gold
- Region
- pahang state in the central gold belt of western malaysia
- Reported Region
- Pahang State in the Central Gold Belt of Western Malaysia
- Ticker
- MMY
Geometry
- Grade
- 1.52
- Grade Unit
- g/t
- Intercept
- 12.5 m
- From
- 94.5 m
- To
- 107 m
- Hole Depth
- 120 m
Classification
- Program
- mixed
- Sample Type
- drill
- Mining Method
- open_pit
Location
- Easting
- 421272
- Northing
- 472022.9
- CRS
- MRSO Local Grid
- Elevation
- 58.5 m
- Azimuth
- 72 °
- Dip
- -90 °
- Loc. Confidence
- high
QA/QC
- Laboratory
- SGS Malaysia
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- blanks, standards, duplicates, check_assays
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-05-29T00:00:00.000Z
Reasoning: This intercept shows a moderate gold grade over a significant width, which is a positive result.
Negative factors
- Apparent Width Only
Evidence · table
“1.52g/t Au”
Context: 12.5
Rejected tags
Rejected tags — excluded from scoring because their label or evidence could not be verified.
Apparent Width OnlyRejected · negative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Reason: The document explicitly states that reported intervals are downhole lengths and do not represent true widths.
Evidence · text
“The reported intervals are downhole lengths and do not represent true widths. True widths will be determined once geological modelling has been completed.”
MBRDD635Selinsing Gold Mine · goldGrade: 2.39Grade Unit: g/tIntercept: 6.5 mView all detailsHide details
Identity
- Hole ID
- MBRDD635
- Project
- Selinsing Gold Mine
- Commodity
- gold
- Region
- pahang state in the central gold belt of western malaysia
- Reported Region
- Pahang State in the Central Gold Belt of Western Malaysia
- Ticker
- MMY
Geometry
- Grade
- 2.39
- Grade Unit
- g/t
- Intercept
- 6.5 m
- From
- 113.5 m
- To
- 120 m
- Hole Depth
- 120 m
Classification
- Program
- mixed
- Sample Type
- drill
- Mining Method
- open_pit
Location
- Easting
- 421272
- Northing
- 472022.9
- CRS
- MRSO Local Grid
- Elevation
- 58.5 m
- Azimuth
- 72 °
- Dip
- -90 °
- Loc. Confidence
- high
QA/QC
- Laboratory
- SGS Malaysia
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- blanks, standards, duplicates, check_assays
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-05-29T00:00:00.000Z
Reasoning: This intercept shows a strong gold grade over a moderate width, which is a positive result.
Negative factors
- Apparent Width Only
Evidence · table
“2.39g/t Au”
Context: 6.5
Rejected tags
Rejected tags — excluded from scoring because their label or evidence could not be verified.
Apparent Width OnlyRejected · negative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Reason: The document explicitly states that reported intervals are downhole lengths and do not represent true widths.
Evidence · text
“The reported intervals are downhole lengths and do not represent true widths. True widths will be determined once geological modelling has been completed.”
MBRRC636Selinsing Gold Mine · goldGrade: 1.98Grade Unit: g/tIntercept: 3.9 mView all detailsHide details
Identity
- Hole ID
- MBRRC636
- Project
- Selinsing Gold Mine
- Commodity
- gold
- Region
- pahang state in the central gold belt of western malaysia
- Reported Region
- Pahang State in the Central Gold Belt of Western Malaysia
- Ticker
- MMY
Geometry
- Grade
- 1.98
- Grade Unit
- g/t
- Intercept
- 3.9 m
- From
- 81 m
- To
- 84.9 m
- Hole Depth
- 114.9 m
Classification
- Program
- mixed
- Sample Type
- drill
- Mining Method
- open_pit
Location
- Easting
- 421395.7
- Northing
- 471857.8
- CRS
- MRSO Local Grid
- Elevation
- 108 m
- Azimuth
- 262 °
- Dip
- -60 °
- Loc. Confidence
- high
QA/QC
- Laboratory
- SGS Malaysia
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- blanks, standards, duplicates, check_assays
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-05-29T00:00:00.000Z
Reasoning: This intercept shows a moderate gold grade over a moderate width, which is a positive indicator within the overall drill program.
Negative factors
- Apparent Width Only
Evidence · table
“1.98g/t Au”
Context: 3.9
Rejected tags
Rejected tags — excluded from scoring because their label or evidence could not be verified.
Apparent Width OnlyRejected · negative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Reason: The document explicitly states that reported intervals are downhole lengths and do not represent true widths.
Evidence · text
“The reported intervals are downhole lengths and do not represent true widths. True widths will be determined once geological modelling has been completed.”
MBRDD637Selinsing Gold Mine · goldGrade: 0.43Grade Unit: g/tIntercept: 1.6 mView all detailsHide details
Identity
- Hole ID
- MBRDD637
- Project
- Selinsing Gold Mine
- Commodity
- gold
- Region
- pahang state in the central gold belt of western malaysia
- Reported Region
- Pahang State in the Central Gold Belt of Western Malaysia
- Ticker
- MMY
Geometry
- Grade
- 0.43
- Grade Unit
- g/t
- Intercept
- 1.6 m
- From
- 0 m
- To
- 1.6 m
- Hole Depth
- 98.9 m
Classification
- Program
- mixed
- Sample Type
- drill
- Mining Method
- open_pit
Location
- Easting
- 421271.1
- Northing
- 472082.3
- CRS
- MRSO Local Grid
- Elevation
- 58.9 m
- Azimuth
- 262 °
- Dip
- -60 °
- Loc. Confidence
- high
QA/QC
- Laboratory
- SGS Malaysia
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- blanks, standards, duplicates, check_assays
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-05-29T00:00:00.000Z
Reasoning: This intercept shows weak gold grade over a very narrow width, which is not highly material but contributes to the overall understanding of the deposit.
Negative factors
- Apparent Width Only
Evidence · table
“0.43g/t Au”
Context: 1.6
Rejected tags
Rejected tags — excluded from scoring because their label or evidence could not be verified.
Apparent Width OnlyRejected · negative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Reason: The document explicitly states that reported intervals are downhole lengths and do not represent true widths.
Evidence · text
“The reported intervals are downhole lengths and do not represent true widths. True widths will be determined once geological modelling has been completed.”
MBRDD637Selinsing Gold Mine · goldGrade: 2.81Grade Unit: g/tIntercept: 4.8 mView all detailsHide details
Identity
- Hole ID
- MBRDD637
- Project
- Selinsing Gold Mine
- Commodity
- gold
- Region
- pahang state in the central gold belt of western malaysia
- Reported Region
- Pahang State in the Central Gold Belt of Western Malaysia
- Ticker
- MMY
Geometry
- Grade
- 2.81
- Grade Unit
- g/t
- Intercept
- 4.8 m
- From
- 26 m
- To
- 30.8 m
- Hole Depth
- 98.9 m
Classification
- Program
- mixed
- Sample Type
- drill
- Mining Method
- open_pit
Location
- Easting
- 421271.1
- Northing
- 472082.3
- CRS
- MRSO Local Grid
- Elevation
- 58.9 m
- Azimuth
- 262 °
- Dip
- -60 °
- Loc. Confidence
- high
QA/QC
- Laboratory
- SGS Malaysia
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- blanks, standards, duplicates, check_assays
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-05-29T00:00:00.000Z
Reasoning: This intercept shows a strong gold grade over a moderate width, which is a positive result.
Negative factors
- Apparent Width Only
Evidence · table
“2.81g/t Au”
Context: 4.8
Rejected tags
Rejected tags — excluded from scoring because their label or evidence could not be verified.
Apparent Width OnlyRejected · negative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Reason: The document explicitly states that reported intervals are downhole lengths and do not represent true widths.
Evidence · text
“The reported intervals are downhole lengths and do not represent true widths. True widths will be determined once geological modelling has been completed.”
MBRDD637Selinsing Gold Mine · goldGrade: 1.99Grade Unit: g/tIntercept: 0.7 mView all detailsHide details
Identity
- Hole ID
- MBRDD637
- Project
- Selinsing Gold Mine
- Commodity
- gold
- Region
- pahang state in the central gold belt of western malaysia
- Reported Region
- Pahang State in the Central Gold Belt of Western Malaysia
- Ticker
- MMY
Geometry
- Grade
- 1.99
- Grade Unit
- g/t
- Intercept
- 0.7 m
- From
- 48.7 m
- To
- 49.4 m
- Hole Depth
- 98.9 m
Classification
- Program
- mixed
- Sample Type
- drill
- Mining Method
- open_pit
Location
- Easting
- 421271.1
- Northing
- 472082.3
- CRS
- MRSO Local Grid
- Elevation
- 58.9 m
- Azimuth
- 262 °
- Dip
- -60 °
- Loc. Confidence
- high
QA/QC
- Laboratory
- SGS Malaysia
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- blanks, standards, duplicates, check_assays
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-05-29T00:00:00.000Z
Reasoning: This intercept shows a moderate gold grade over a very narrow width, which is a positive indicator.
Negative factors
- Apparent Width Only
Evidence · table
“1.99g/t Au”
Context: 0.7
Rejected tags
Rejected tags — excluded from scoring because their label or evidence could not be verified.
Apparent Width OnlyRejected · negative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Reason: The document explicitly states that reported intervals are downhole lengths and do not represent true widths.
Evidence · text
“The reported intervals are downhole lengths and do not represent true widths. True widths will be determined once geological modelling has been completed.”
MBRDD637Selinsing Gold Mine · goldGrade: 0.49Grade Unit: g/tIntercept: 0.9 mView all detailsHide details
Identity
- Hole ID
- MBRDD637
- Project
- Selinsing Gold Mine
- Commodity
- gold
- Region
- pahang state in the central gold belt of western malaysia
- Reported Region
- Pahang State in the Central Gold Belt of Western Malaysia
- Ticker
- MMY
Geometry
- Grade
- 0.49
- Grade Unit
- g/t
- Intercept
- 0.9 m
- From
- 56.8 m
- To
- 57.7 m
- Hole Depth
- 98.9 m
Classification
- Program
- mixed
- Sample Type
- drill
- Mining Method
- open_pit
Location
- Easting
- 421271.1
- Northing
- 472082.3
- CRS
- MRSO Local Grid
- Elevation
- 58.9 m
- Azimuth
- 262 °
- Dip
- -60 °
- Loc. Confidence
- high
QA/QC
- Laboratory
- SGS Malaysia
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- blanks, standards, duplicates, check_assays
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-05-29T00:00:00.000Z
Reasoning: This intercept shows weak gold grade over a very narrow width, which is not highly material but contributes to the overall understanding of the deposit.
Negative factors
- Apparent Width Only
Evidence · table
“0.49g/t Au”
Context: 0.9
Rejected tags
Rejected tags — excluded from scoring because their label or evidence could not be verified.
Apparent Width OnlyRejected · negative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Reason: The document explicitly states that reported intervals are downhole lengths and do not represent true widths.
Evidence · text
“The reported intervals are downhole lengths and do not represent true widths. True widths will be determined once geological modelling has been completed.”
MBRDD638Selinsing Gold Mine · goldGrade: 0.32Grade Unit: g/tIntercept: 1.3 mView all detailsHide details
Identity
- Hole ID
- MBRDD638
- Project
- Selinsing Gold Mine
- Commodity
- gold
- Region
- pahang state in the central gold belt of western malaysia
- Reported Region
- Pahang State in the Central Gold Belt of Western Malaysia
- Ticker
- MMY
Geometry
- Grade
- 0.32
- Grade Unit
- g/t
- Intercept
- 1.3 m
- From
- 28.9 m
- To
- 30.2 m
- Hole Depth
- 140.2 m
Classification
- Program
- mixed
- Sample Type
- drill
- Mining Method
- open_pit
Location
- Easting
- 421296
- Northing
- 471944.9
- CRS
- MRSO Local Grid
- Elevation
- 59 m
- Azimuth
- 72 °
- Dip
- -90 °
- Loc. Confidence
- high
QA/QC
- Laboratory
- SGS Malaysia
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- blanks, standards, duplicates, check_assays
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-05-29T00:00:00.000Z
Reasoning: This intercept shows weak gold grade over a very narrow width, which is not highly material but contributes to the overall understanding of the deposit.
Negative factors
- Apparent Width Only
Evidence · table
“0.32g/t Au”
Context: 1.3
Rejected tags
Rejected tags — excluded from scoring because their label or evidence could not be verified.
Apparent Width OnlyRejected · negative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Reason: The document explicitly states that reported intervals are downhole lengths and do not represent true widths.
Evidence · text
“The reported intervals are downhole lengths and do not represent true widths. True widths will be determined once geological modelling has been completed.”
MBRDD638Selinsing Gold Mine · goldGrade: 0.92Grade Unit: g/tIntercept: 3 mView all detailsHide details
Identity
- Hole ID
- MBRDD638
- Project
- Selinsing Gold Mine
- Commodity
- gold
- Region
- pahang state in the central gold belt of western malaysia
- Reported Region
- Pahang State in the Central Gold Belt of Western Malaysia
- Ticker
- MMY
Geometry
- Grade
- 0.92
- Grade Unit
- g/t
- Intercept
- 3 m
- From
- 36.7 m
- To
- 39.7 m
- Hole Depth
- 140.2 m
Classification
- Program
- mixed
- Sample Type
- drill
- Mining Method
- open_pit
Location
- Easting
- 421296
- Northing
- 471944.9
- CRS
- MRSO Local Grid
- Elevation
- 59 m
- Azimuth
- 72 °
- Dip
- -90 °
- Loc. Confidence
- high
QA/QC
- Laboratory
- SGS Malaysia
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- blanks, standards, duplicates, check_assays
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-05-29T00:00:00.000Z
Reasoning: This intercept shows moderate gold grade over a narrow width, which is a positive indicator.
Negative factors
- Apparent Width Only
Evidence · table
“0.92g/t Au”
Context: 3.0
Rejected tags
Rejected tags — excluded from scoring because their label or evidence could not be verified.
Apparent Width OnlyRejected · negative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Reason: The document explicitly states that reported intervals are downhole lengths and do not represent true widths.
Evidence · text
“The reported intervals are downhole lengths and do not represent true widths. True widths will be determined once geological modelling has been completed.”
MBRDD638Selinsing Gold Mine · goldGrade: 0.73Grade Unit: g/tIntercept: 0.7 mView all detailsHide details
Identity
- Hole ID
- MBRDD638
- Project
- Selinsing Gold Mine
- Commodity
- gold
- Region
- pahang state in the central gold belt of western malaysia
- Reported Region
- Pahang State in the Central Gold Belt of Western Malaysia
- Ticker
- MMY
Geometry
- Grade
- 0.73
- Grade Unit
- g/t
- Intercept
- 0.7 m
- From
- 55.5 m
- To
- 56.2 m
- Hole Depth
- 140.2 m
Classification
- Program
- mixed
- Sample Type
- drill
- Mining Method
- open_pit
Location
- Easting
- 421296
- Northing
- 471944.9
- CRS
- MRSO Local Grid
- Elevation
- 59 m
- Azimuth
- 72 °
- Dip
- -90 °
- Loc. Confidence
- high
QA/QC
- Laboratory
- SGS Malaysia
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- blanks, standards, duplicates, check_assays
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-05-29T00:00:00.000Z
Reasoning: This intercept shows moderate gold grade over a very narrow width, which is not highly material but contributes to the overall understanding of the deposit.
Negative factors
- Apparent Width Only
Evidence · table
“0.73g/t Au”
Context: 0.7
Rejected tags
Rejected tags — excluded from scoring because their label or evidence could not be verified.
Apparent Width OnlyRejected · negative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Reason: The document explicitly states that reported intervals are downhole lengths and do not represent true widths.
Evidence · text
“The reported intervals are downhole lengths and do not represent true widths. True widths will be determined once geological modelling has been completed.”
MBRDD638Selinsing Gold Mine · goldGrade: 1.9Grade Unit: g/tIntercept: 19.8 mView all detailsHide details
Identity
- Hole ID
- MBRDD638
- Project
- Selinsing Gold Mine
- Commodity
- gold
- Region
- pahang state in the central gold belt of western malaysia
- Reported Region
- Pahang State in the Central Gold Belt of Western Malaysia
- Ticker
- MMY
Geometry
- Grade
- 1.9
- Grade Unit
- g/t
- Intercept
- 19.8 m
- From
- 100.7 m
- To
- 120.5 m
- Hole Depth
- 140.2 m
Classification
- Program
- mixed
- Sample Type
- drill
- Group ID
- MBRDD638:100.7-120.5
- Mining Method
- open_pit
Location
- Easting
- 421296
- Northing
- 471944.9
- CRS
- MRSO Local Grid
- Elevation
- 59 m
- Azimuth
- 72 °
- Dip
- -90 °
- Loc. Confidence
- high
QA/QC
- Laboratory
- SGS Malaysia
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- blanks, standards, duplicates, check_assays
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-05-29T00:00:00.000Z
Reasoning: This intercept shows a strong gold grade over a significant width, which is a highly positive result and indicates good mineralization continuity.
Negative factors
- Apparent Width Only
Evidence · table
“1.90g/t Au”
Context: 19.8
Rejected tags
Rejected tags — excluded from scoring because their label or evidence could not be verified.
Apparent Width OnlyRejected · negative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Reason: The document explicitly states that reported intervals are downhole lengths and do not represent true widths.
Evidence · text
“The reported intervals are downhole lengths and do not represent true widths. True widths will be determined once geological modelling has been completed.”
MBRDD638Selinsing Gold Mine · goldGrade: 3.02Grade Unit: g/tIntercept: 2.5 mView all detailsHide details
Identity
- Hole ID
- MBRDD638
- Project
- Selinsing Gold Mine
- Commodity
- gold
- Region
- pahang state in the central gold belt of western malaysia
- Reported Region
- Pahang State in the Central Gold Belt of Western Malaysia
- Ticker
- MMY
Geometry
- Grade
- 3.02
- Grade Unit
- g/t
- Intercept
- 2.5 m
- From
- 100.7 m
- To
- 103.2 m
- Hole Depth
- 140.2 m
Classification
- Program
- mixed
- Sample Type
- drill
- Group ID
- MBRDD638:100.7-120.5
- Mining Method
- open_pit
Location
- Easting
- 421296
- Northing
- 471944.9
- CRS
- MRSO Local Grid
- Elevation
- 59 m
- Azimuth
- 72 °
- Dip
- -90 °
- Loc. Confidence
- high
QA/QC
- Laboratory
- SGS Malaysia
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- blanks, standards, duplicates, check_assays
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-05-29T00:00:00.000Z
Reasoning: This sub-interval shows a strong gold grade over a narrow width, which is a positive indicator within the broader intercept.
Negative factors
- Apparent Width Only
Evidence · table
“3.02g/t Au”
Context: 2.5m
Rejected tags
Rejected tags — excluded from scoring because their label or evidence could not be verified.
Apparent Width OnlyRejected · negative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Reason: The document explicitly states that reported intervals are downhole lengths and do not represent true widths.
Evidence · text
“The reported intervals are downhole lengths and do not represent true widths. True widths will be determined once geological modelling has been completed.”
MBRDD638Selinsing Gold Mine · goldGrade: 2.31Grade Unit: g/tIntercept: 2.8 mView all detailsHide details
Identity
- Hole ID
- MBRDD638
- Project
- Selinsing Gold Mine
- Commodity
- gold
- Region
- pahang state in the central gold belt of western malaysia
- Reported Region
- Pahang State in the Central Gold Belt of Western Malaysia
- Ticker
- MMY
Geometry
- Grade
- 2.31
- Grade Unit
- g/t
- Intercept
- 2.8 m
- From
- 105.4 m
- To
- 108.2 m
- Hole Depth
- 140.2 m
Classification
- Program
- mixed
- Sample Type
- drill
- Group ID
- MBRDD638:100.7-120.5
- Mining Method
- open_pit
Location
- Easting
- 421296
- Northing
- 471944.9
- CRS
- MRSO Local Grid
- Elevation
- 59 m
- Azimuth
- 72 °
- Dip
- -90 °
- Loc. Confidence
- high
QA/QC
- Laboratory
- SGS Malaysia
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- blanks, standards, duplicates, check_assays
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-05-29T00:00:00.000Z
Reasoning: This sub-interval shows a strong gold grade over a narrow width, which is a positive indicator within the broader intercept.
Negative factors
- Apparent Width Only
Evidence · table
“2.31g/t Au”
Context: 2.8m
Rejected tags
Rejected tags — excluded from scoring because their label or evidence could not be verified.
Apparent Width OnlyRejected · negative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Reason: The document explicitly states that reported intervals are downhole lengths and do not represent true widths.
Evidence · text
“The reported intervals are downhole lengths and do not represent true widths. True widths will be determined once geological modelling has been completed.”
MBRDD638Selinsing Gold Mine · goldGrade: 2.93Grade Unit: g/tIntercept: 4.3 mView all detailsHide details
Identity
- Hole ID
- MBRDD638
- Project
- Selinsing Gold Mine
- Commodity
- gold
- Region
- pahang state in the central gold belt of western malaysia
- Reported Region
- Pahang State in the Central Gold Belt of Western Malaysia
- Ticker
- MMY
Geometry
- Grade
- 2.93
- Grade Unit
- g/t
- Intercept
- 4.3 m
- From
- 110.2 m
- To
- 114.5 m
- Hole Depth
- 140.2 m
Classification
- Program
- mixed
- Sample Type
- drill
- Group ID
- MBRDD638:100.7-120.5
- Mining Method
- open_pit
Location
- Easting
- 421296
- Northing
- 471944.9
- CRS
- MRSO Local Grid
- Elevation
- 59 m
- Azimuth
- 72 °
- Dip
- -90 °
- Loc. Confidence
- high
QA/QC
- Laboratory
- SGS Malaysia
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- blanks, standards, duplicates, check_assays
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-05-29T00:00:00.000Z
Reasoning: This sub-interval shows a strong gold grade over a moderate width, which is a significant positive result within the broader intercept.
Negative factors
- Apparent Width Only
Evidence · table
“2.93g/t Au”
Context: 4.3m
Rejected tags
Rejected tags — excluded from scoring because their label or evidence could not be verified.
Apparent Width OnlyRejected · negative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Reason: The document explicitly states that reported intervals are downhole lengths and do not represent true widths.
Evidence · text
“The reported intervals are downhole lengths and do not represent true widths. True widths will be determined once geological modelling has been completed.”
MBRDD639Selinsing Gold Mine · goldGrade: 0.66Grade Unit: g/tIntercept: 1.5 mView all detailsHide details
Identity
- Hole ID
- MBRDD639
- Project
- Selinsing Gold Mine
- Commodity
- gold
- Region
- pahang state in the central gold belt of western malaysia
- Reported Region
- Pahang State in the Central Gold Belt of Western Malaysia
- Ticker
- MMY
Geometry
- Grade
- 0.66
- Grade Unit
- g/t
- Intercept
- 1.5 m
- From
- 1.5 m
- To
- 3 m
- Hole Depth
- 114 m
Classification
- Program
- mixed
- Sample Type
- drill
- Mining Method
- open_pit
Location
- Easting
- 421265.4
- Northing
- 472001
- CRS
- MRSO Local Grid
- Elevation
- 58.6 m
- Azimuth
- 262 °
- Dip
- -80 °
- Loc. Confidence
- high
QA/QC
- Laboratory
- SGS Malaysia
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- blanks, standards, duplicates, check_assays
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-05-29T00:00:00.000Z
Reasoning: This intercept shows weak gold grade over a very narrow width, which is not highly material but contributes to the overall understanding of the deposit.
Negative factors
- Apparent Width Only
Evidence · table
“0.66g/t Au”
Context: 1.5
Rejected tags
Rejected tags — excluded from scoring because their label or evidence could not be verified.
Apparent Width OnlyRejected · negative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Reason: The document explicitly states that reported intervals are downhole lengths and do not represent true widths.
Evidence · text
“The reported intervals are downhole lengths and do not represent true widths. True widths will be determined once geological modelling has been completed.”
MBRDD639Selinsing Gold Mine · goldGrade: 0.5Grade Unit: g/tIntercept: 1.5 mView all detailsHide details
Identity
- Hole ID
- MBRDD639
- Project
- Selinsing Gold Mine
- Commodity
- gold
- Region
- pahang state in the central gold belt of western malaysia
- Reported Region
- Pahang State in the Central Gold Belt of Western Malaysia
- Ticker
- MMY
Geometry
- Grade
- 0.5
- Grade Unit
- g/t
- Intercept
- 1.5 m
- From
- 10.5 m
- To
- 12 m
- Hole Depth
- 114 m
Classification
- Program
- mixed
- Sample Type
- drill
- Mining Method
- open_pit
Location
- Easting
- 421265.4
- Northing
- 472001
- CRS
- MRSO Local Grid
- Elevation
- 58.6 m
- Azimuth
- 262 °
- Dip
- -80 °
- Loc. Confidence
- high
QA/QC
- Laboratory
- SGS Malaysia
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- blanks, standards, duplicates, check_assays
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-05-29T00:00:00.000Z
Reasoning: This intercept shows weak gold grade over a very narrow width, which is not highly material but contributes to the overall understanding of the deposit.
Negative factors
- Apparent Width Only
Evidence · table
“0.50g/t Au”
Context: 1.5
Rejected tags
Rejected tags — excluded from scoring because their label or evidence could not be verified.
Apparent Width OnlyRejected · negative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Reason: The document explicitly states that reported intervals are downhole lengths and do not represent true widths.
Evidence · text
“The reported intervals are downhole lengths and do not represent true widths. True widths will be determined once geological modelling has been completed.”
MBRDD639Selinsing Gold Mine · goldGrade: 1.77Grade Unit: g/tIntercept: 22.5 mView all detailsHide details
Identity
- Hole ID
- MBRDD639
- Project
- Selinsing Gold Mine
- Commodity
- gold
- Region
- pahang state in the central gold belt of western malaysia
- Reported Region
- Pahang State in the Central Gold Belt of Western Malaysia
- Ticker
- MMY
Geometry
- Grade
- 1.77
- Grade Unit
- g/t
- Intercept
- 22.5 m
- From
- 58.5 m
- To
- 81 m
- Hole Depth
- 114 m
Classification
- Program
- mixed
- Sample Type
- drill
- Group ID
- MBRDD639:58.5-81.0
- Mining Method
- open_pit
Location
- Easting
- 421265.4
- Northing
- 472001
- CRS
- MRSO Local Grid
- Elevation
- 58.6 m
- Azimuth
- 262 °
- Dip
- -80 °
- Loc. Confidence
- high
QA/QC
- Laboratory
- SGS Malaysia
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- blanks, standards, duplicates, check_assays
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-05-29T00:00:00.000Z
Reasoning: This intercept shows a moderate gold grade over a significant width, which is a highly positive result and indicates good mineralization continuity.
Negative factors
- Apparent Width Only
Evidence · table
“1.77g/t Au”
Context: 22.5
Rejected tags
Rejected tags — excluded from scoring because their label or evidence could not be verified.
Apparent Width OnlyRejected · negative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Reason: The document explicitly states that reported intervals are downhole lengths and do not represent true widths.
Evidence · text
“The reported intervals are downhole lengths and do not represent true widths. True widths will be determined once geological modelling has been completed.”
MBRDD639Selinsing Gold Mine · goldGrade: 3.58Grade Unit: g/tIntercept: 7.5 mView all detailsHide details
Identity
- Hole ID
- MBRDD639
- Project
- Selinsing Gold Mine
- Commodity
- gold
- Region
- pahang state in the central gold belt of western malaysia
- Reported Region
- Pahang State in the Central Gold Belt of Western Malaysia
- Ticker
- MMY
Geometry
- Grade
- 3.58
- Grade Unit
- g/t
- Intercept
- 7.5 m
- From
- 64.5 m
- To
- 72 m
- Hole Depth
- 114 m
Classification
- Program
- mixed
- Sample Type
- drill
- Group ID
- MBRDD639:58.5-81.0
- Mining Method
- open_pit
Location
- Easting
- 421265.4
- Northing
- 472001
- CRS
- MRSO Local Grid
- Elevation
- 58.6 m
- Azimuth
- 262 °
- Dip
- -80 °
- Loc. Confidence
- high
QA/QC
- Laboratory
- SGS Malaysia
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- blanks, standards, duplicates, check_assays
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-05-29T00:00:00.000Z
Reasoning: This sub-interval shows a strong gold grade over a moderate width, which is a significant positive result within the broader intercept.
Negative factors
- Apparent Width Only
Evidence · table
“3.58g/t Au”
Context: 7.5m
Rejected tags
Rejected tags — excluded from scoring because their label or evidence could not be verified.
Apparent Width OnlyRejected · negative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Reason: The document explicitly states that reported intervals are downhole lengths and do not represent true widths.
Evidence · text
“The reported intervals are downhole lengths and do not represent true widths. True widths will be determined once geological modelling has been completed.”
MBRDD641Selinsing Gold Mine · goldGrade: 0.51Grade Unit: g/tIntercept: 2 mView all detailsHide details
Identity
- Hole ID
- MBRDD641
- Project
- Selinsing Gold Mine
- Commodity
- gold
- Region
- pahang state in the central gold belt of western malaysia
- Reported Region
- Pahang State in the Central Gold Belt of Western Malaysia
- Ticker
- MMY
Geometry
- Grade
- 0.51
- Grade Unit
- g/t
- Intercept
- 2 m
- From
- 0 m
- To
- 2 m
- Hole Depth
- 80 m
Classification
- Program
- mixed
- Sample Type
- drill
- Mining Method
- open_pit
Location
- Easting
- 421270.2
- Northing
- 471860.5
- CRS
- MRSO Local Grid
- Elevation
- 58.7 m
- Azimuth
- 72 °
- Dip
- -90 °
- Loc. Confidence
- high
QA/QC
- Laboratory
- SGS Malaysia
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- blanks, standards, duplicates, check_assays
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-05-29T00:00:00.000Z
Reasoning: This intercept shows weak gold grade over a narrow width, which is not highly material but contributes to the overall understanding of the deposit.
Negative factors
- Apparent Width Only
Evidence · table
“0.51g/t Au”
Context: 2.0
Rejected tags
Rejected tags — excluded from scoring because their label or evidence could not be verified.
Apparent Width OnlyRejected · negative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Reason: The document explicitly states that reported intervals are downhole lengths and do not represent true widths.
Evidence · text
“The reported intervals are downhole lengths and do not represent true widths. True widths will be determined once geological modelling has been completed.”
MBRDD641Selinsing Gold Mine · goldGrade: 0.53Grade Unit: g/tIntercept: 0.7 mView all detailsHide details
Identity
- Hole ID
- MBRDD641
- Project
- Selinsing Gold Mine
- Commodity
- gold
- Region
- pahang state in the central gold belt of western malaysia
- Reported Region
- Pahang State in the Central Gold Belt of Western Malaysia
- Ticker
- MMY
Geometry
- Grade
- 0.53
- Grade Unit
- g/t
- Intercept
- 0.7 m
- From
- 4.3 m
- To
- 5 m
- Hole Depth
- 80 m
Classification
- Program
- mixed
- Sample Type
- drill
- Mining Method
- open_pit
Location
- Easting
- 421270.2
- Northing
- 471860.5
- CRS
- MRSO Local Grid
- Elevation
- 58.7 m
- Azimuth
- 72 °
- Dip
- -90 °
- Loc. Confidence
- high
QA/QC
- Laboratory
- SGS Malaysia
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- blanks, standards, duplicates, check_assays
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-05-29T00:00:00.000Z
Reasoning: This intercept shows weak gold grade over a very narrow width, which is not highly material but contributes to the overall understanding of the deposit.
Negative factors
- Apparent Width Only
Evidence · table
“0.53/t Au”
Context: 0.7
Rejected tags
Rejected tags — excluded from scoring because their label or evidence could not be verified.
Apparent Width OnlyRejected · negative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Reason: The document explicitly states that reported intervals are downhole lengths and do not represent true widths.
Evidence · text
“The reported intervals are downhole lengths and do not represent true widths. True widths will be determined once geological modelling has been completed.”
MBRDD641Selinsing Gold Mine · goldGrade: 1.99Grade Unit: g/tIntercept: 21 mView all detailsHide details
Identity
- Hole ID
- MBRDD641
- Project
- Selinsing Gold Mine
- Commodity
- gold
- Region
- pahang state in the central gold belt of western malaysia
- Reported Region
- Pahang State in the Central Gold Belt of Western Malaysia
- Ticker
- MMY
Geometry
- Grade
- 1.99
- Grade Unit
- g/t
- Intercept
- 21 m
- From
- 42 m
- To
- 63 m
- Hole Depth
- 80 m
Classification
- Program
- mixed
- Sample Type
- drill
- Group ID
- MBRDD641:42.0-63.0
- Mining Method
- open_pit
Location
- Easting
- 421270.2
- Northing
- 471860.5
- CRS
- MRSO Local Grid
- Elevation
- 58.7 m
- Azimuth
- 72 °
- Dip
- -90 °
- Loc. Confidence
- high
QA/QC
- Laboratory
- SGS Malaysia
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- blanks, standards, duplicates, check_assays
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-05-29T00:00:00.000Z
Reasoning: This intercept shows a moderate gold grade over a significant width, which is a highly positive result and indicates good mineralization continuity.
Negative factors
- Apparent Width Only
Evidence · table
“1.99g/t Au”
Context: 21.0
Rejected tags
Rejected tags — excluded from scoring because their label or evidence could not be verified.
Apparent Width OnlyRejected · negative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Reason: The document explicitly states that reported intervals are downhole lengths and do not represent true widths.
Evidence · text
“The reported intervals are downhole lengths and do not represent true widths. True widths will be determined once geological modelling has been completed.”
MBRDD641Selinsing Gold Mine · goldGrade: 3.66Grade Unit: g/tIntercept: 4.5 mView all detailsHide details
Identity
- Hole ID
- MBRDD641
- Project
- Selinsing Gold Mine
- Commodity
- gold
- Region
- pahang state in the central gold belt of western malaysia
- Reported Region
- Pahang State in the Central Gold Belt of Western Malaysia
- Ticker
- MMY
Geometry
- Grade
- 3.66
- Grade Unit
- g/t
- Intercept
- 4.5 m
- From
- 52.5 m
- To
- 57 m
- Hole Depth
- 80 m
Classification
- Program
- mixed
- Sample Type
- drill
- Group ID
- MBRDD641:42.0-63.0
- Mining Method
- open_pit
Location
- Easting
- 421270.2
- Northing
- 471860.5
- CRS
- MRSO Local Grid
- Elevation
- 58.7 m
- Azimuth
- 72 °
- Dip
- -90 °
- Loc. Confidence
- high
QA/QC
- Laboratory
- SGS Malaysia
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- blanks, standards, duplicates, check_assays
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-05-29T00:00:00.000Z
Reasoning: This sub-interval shows a strong gold grade over a moderate width, which is a significant positive result within the broader intercept.
Negative factors
- Apparent Width Only
Evidence · table
“3.66g/t Au”
Context: 4.5
Rejected tags
Rejected tags — excluded from scoring because their label or evidence could not be verified.
Apparent Width OnlyRejected · negative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Reason: The document explicitly states that reported intervals are downhole lengths and do not represent true widths.
Evidence · text
“The reported intervals are downhole lengths and do not represent true widths. True widths will be determined once geological modelling has been completed.”
MBRDD641Selinsing Gold Mine · goldGrade: 0.39Grade Unit: g/tIntercept: 1.5 mView all detailsHide details
Identity
- Hole ID
- MBRDD641
- Project
- Selinsing Gold Mine
- Commodity
- gold
- Region
- pahang state in the central gold belt of western malaysia
- Reported Region
- Pahang State in the Central Gold Belt of Western Malaysia
- Ticker
- MMY
Geometry
- Grade
- 0.39
- Grade Unit
- g/t
- Intercept
- 1.5 m
- From
- 77 m
- To
- 78.5 m
- Hole Depth
- 80 m
Classification
- Program
- mixed
- Sample Type
- drill
- Mining Method
- open_pit
Location
- Easting
- 421270.2
- Northing
- 471860.5
- CRS
- MRSO Local Grid
- Elevation
- 58.7 m
- Azimuth
- 72 °
- Dip
- -90 °
- Loc. Confidence
- high
QA/QC
- Laboratory
- SGS Malaysia
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- blanks, standards, duplicates, check_assays
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-05-29T00:00:00.000Z
Reasoning: This intercept shows weak gold grade over a very narrow width, which is not highly material but contributes to the overall understanding of the deposit.
Negative factors
- Apparent Width Only
Evidence · table
“0.39g/t Au”
Context: 1.5
Rejected tags
Rejected tags — excluded from scoring because their label or evidence could not be verified.
Apparent Width OnlyRejected · negative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Reason: The document explicitly states that reported intervals are downhole lengths and do not represent true widths.
Evidence · text
“The reported intervals are downhole lengths and do not represent true widths. True widths will be determined once geological modelling has been completed.”
MBRDD642Selinsing Gold Mine · goldGrade: 0.86Grade Unit: g/tIntercept: 1 mView all detailsHide details
Identity
- Hole ID
- MBRDD642
- Project
- Selinsing Gold Mine
- Commodity
- gold
- Region
- pahang state in the central gold belt of western malaysia
- Reported Region
- Pahang State in the Central Gold Belt of Western Malaysia
- Ticker
- MMY
Geometry
- Grade
- 0.86
- Grade Unit
- g/t
- Intercept
- 1 m
- From
- 59 m
- To
- 60 m
- Hole Depth
- 145.2 m
Classification
- Program
- mixed
- Sample Type
- drill
- Mining Method
- open_pit
Location
- Easting
- 421330.4
- Northing
- 471667.3
- CRS
- MRSO Local Grid
- Elevation
- 122.8 m
- Azimuth
- 262 °
- Dip
- -60 °
- Loc. Confidence
- high
QA/QC
- Laboratory
- SGS Malaysia
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- blanks, standards, duplicates, check_assays
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-05-29T00:00:00.000Z
Reasoning: This intercept shows moderate gold grade over a very narrow width, which is not highly material but contributes to the overall understanding of the deposit.
Negative factors
- Apparent Width Only
Evidence · table
“0.86g/t Au”
Context: 1.0
Rejected tags
Rejected tags — excluded from scoring because their label or evidence could not be verified.
Apparent Width OnlyRejected · negative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Reason: The document explicitly states that reported intervals are downhole lengths and do not represent true widths.
Evidence · text
“The reported intervals are downhole lengths and do not represent true widths. True widths will be determined once geological modelling has been completed.”
MBRDD642Selinsing Gold Mine · goldGrade: 0.68Grade Unit: g/tIntercept: 1.4 mView all detailsHide details
Identity
- Hole ID
- MBRDD642
- Project
- Selinsing Gold Mine
- Commodity
- gold
- Region
- pahang state in the central gold belt of western malaysia
- Reported Region
- Pahang State in the Central Gold Belt of Western Malaysia
- Ticker
- MMY
Geometry
- Grade
- 0.68
- Grade Unit
- g/t
- Intercept
- 1.4 m
- From
- 64.6 m
- To
- 66 m
- Hole Depth
- 145.2 m
Classification
- Program
- mixed
- Sample Type
- drill
- Mining Method
- open_pit
Location
- Easting
- 421330.4
- Northing
- 471667.3
- CRS
- MRSO Local Grid
- Elevation
- 122.8 m
- Azimuth
- 262 °
- Dip
- -60 °
- Loc. Confidence
- high
QA/QC
- Laboratory
- SGS Malaysia
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- blanks, standards, duplicates, check_assays
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-05-29T00:00:00.000Z
Reasoning: This intercept shows weak gold grade over a very narrow width, which is not highly material but contributes to the overall understanding of the deposit.
Negative factors
- Apparent Width Only
Evidence · table
“0.68g/t Au”
Context: 1.4
Rejected tags
Rejected tags — excluded from scoring because their label or evidence could not be verified.
Apparent Width OnlyRejected · negative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Reason: The document explicitly states that reported intervals are downhole lengths and do not represent true widths.
Evidence · text
“The reported intervals are downhole lengths and do not represent true widths. True widths will be determined once geological modelling has been completed.”
MBRDD642Selinsing Gold Mine · goldGrade: 1.53Grade Unit: g/tIntercept: 6.7 mView all detailsHide details
Identity
- Hole ID
- MBRDD642
- Project
- Selinsing Gold Mine
- Commodity
- gold
- Region
- pahang state in the central gold belt of western malaysia
- Reported Region
- Pahang State in the Central Gold Belt of Western Malaysia
- Ticker
- MMY
Geometry
- Grade
- 1.53
- Grade Unit
- g/t
- Intercept
- 6.7 m
- From
- 70.3 m
- To
- 77 m
- Hole Depth
- 145.2 m
Classification
- Program
- mixed
- Sample Type
- drill
- Mining Method
- open_pit
Location
- Easting
- 421330.4
- Northing
- 471667.3
- CRS
- MRSO Local Grid
- Elevation
- 122.8 m
- Azimuth
- 262 °
- Dip
- -60 °
- Loc. Confidence
- high
QA/QC
- Laboratory
- SGS Malaysia
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- blanks, standards, duplicates, check_assays
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-05-29T00:00:00.000Z
Reasoning: This intercept shows a moderate gold grade over a moderate width, which is a positive indicator within the overall drill program.
Negative factors
- Apparent Width Only
Evidence · table
“1.53g/t Au”
Context: 6.7
Rejected tags
Rejected tags — excluded from scoring because their label or evidence could not be verified.
Apparent Width OnlyRejected · negative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Reason: The document explicitly states that reported intervals are downhole lengths and do not represent true widths.
Evidence · text
“The reported intervals are downhole lengths and do not represent true widths. True widths will be determined once geological modelling has been completed.”
MBRDD642Selinsing Gold Mine · goldGrade: 4.6Grade Unit: g/tIntercept: 3.8 mView all detailsHide details
Identity
- Hole ID
- MBRDD642
- Project
- Selinsing Gold Mine
- Commodity
- gold
- Region
- pahang state in the central gold belt of western malaysia
- Reported Region
- Pahang State in the Central Gold Belt of Western Malaysia
- Ticker
- MMY
Geometry
- Grade
- 4.6
- Grade Unit
- g/t
- Intercept
- 3.8 m
- From
- 96 m
- To
- 99.8 m
- Hole Depth
- 145.2 m
Classification
- Program
- mixed
- Sample Type
- drill
- Mining Method
- open_pit
Location
- Easting
- 421330.4
- Northing
- 471667.3
- CRS
- MRSO Local Grid
- Elevation
- 122.8 m
- Azimuth
- 262 °
- Dip
- -60 °
- Loc. Confidence
- high
QA/QC
- Laboratory
- SGS Malaysia
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- blanks, standards, duplicates, check_assays
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-05-29T00:00:00.000Z
Reasoning: This intercept shows a strong gold grade over a moderate width, which is a significant positive result.
Negative factors
- Apparent Width Only
Evidence · table
“4.6g/t Au”
Context: 3.8
Rejected tags
Rejected tags — excluded from scoring because their label or evidence could not be verified.
Apparent Width OnlyRejected · negative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Reason: The document explicitly states that reported intervals are downhole lengths and do not represent true widths.
Evidence · text
“The reported intervals are downhole lengths and do not represent true widths. True widths will be determined once geological modelling has been completed.”
MBRDD642Selinsing Gold Mine · goldGrade: 4Grade Unit: g/tIntercept: 0.9 mView all detailsHide details
Identity
- Hole ID
- MBRDD642
- Project
- Selinsing Gold Mine
- Commodity
- gold
- Region
- pahang state in the central gold belt of western malaysia
- Reported Region
- Pahang State in the Central Gold Belt of Western Malaysia
- Ticker
- MMY
Geometry
- Grade
- 4
- Grade Unit
- g/t
- Intercept
- 0.9 m
- From
- 122.1 m
- To
- 123 m
- Hole Depth
- 145.2 m
Classification
- Program
- mixed
- Sample Type
- drill
- Mining Method
- open_pit
Location
- Easting
- 421330.4
- Northing
- 471667.3
- CRS
- MRSO Local Grid
- Elevation
- 122.8 m
- Azimuth
- 262 °
- Dip
- -60 °
- Loc. Confidence
- high
QA/QC
- Laboratory
- SGS Malaysia
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- blanks, standards, duplicates, check_assays
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-05-29T00:00:00.000Z
Reasoning: This intercept shows a strong gold grade over a very narrow width, which is a positive indicator.
Negative factors
- Apparent Width Only
Evidence · table
“4.0g/t Au”
Context: 0.9
Rejected tags
Rejected tags — excluded from scoring because their label or evidence could not be verified.
Apparent Width OnlyRejected · negative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Reason: The document explicitly states that reported intervals are downhole lengths and do not represent true widths.
Evidence · text
“The reported intervals are downhole lengths and do not represent true widths. True widths will be determined once geological modelling has been completed.”
MBRDD643Selinsing Gold Mine · goldGrade: 0.33Grade Unit: g/tIntercept: 3 mView all detailsHide details
Identity
- Hole ID
- MBRDD643
- Project
- Selinsing Gold Mine
- Commodity
- gold
- Region
- pahang state in the central gold belt of western malaysia
- Reported Region
- Pahang State in the Central Gold Belt of Western Malaysia
- Ticker
- MMY
Geometry
- Grade
- 0.33
- Grade Unit
- g/t
- Intercept
- 3 m
- From
- 4.5 m
- To
- 7.5 m
- Hole Depth
- 97.5 m
Classification
- Program
- mixed
- Sample Type
- drill
- Mining Method
- open_pit
Location
- Easting
- 421268.1
- Northing
- 472039.2
- CRS
- MRSO Local Grid
- Elevation
- 58.5 m
- Azimuth
- 262 °
- Dip
- -60 °
- Loc. Confidence
- high
QA/QC
- Laboratory
- SGS Malaysia
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- blanks, standards, duplicates, check_assays
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-05-29T00:00:00.000Z
Reasoning: This intercept shows weak gold grade over a narrow width, which is not highly material but contributes to the overall understanding of the deposit.
Negative factors
- Apparent Width Only
Evidence · table
“0.33g/t Au”
Context: 3.0
Rejected tags
Rejected tags — excluded from scoring because their label or evidence could not be verified.
Apparent Width OnlyRejected · negative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Reason: The document explicitly states that reported intervals are downhole lengths and do not represent true widths.
Evidence · text
“The reported intervals are downhole lengths and do not represent true widths. True widths will be determined once geological modelling has been completed.”
MBRDD643Selinsing Gold Mine · goldGrade: 0.53Grade Unit: g/tIntercept: 7.6 mView all detailsHide details
Identity
- Hole ID
- MBRDD643
- Project
- Selinsing Gold Mine
- Commodity
- gold
- Region
- pahang state in the central gold belt of western malaysia
- Reported Region
- Pahang State in the Central Gold Belt of Western Malaysia
- Ticker
- MMY
Geometry
- Grade
- 0.53
- Grade Unit
- g/t
- Intercept
- 7.6 m
- From
- 59.9 m
- To
- 67.5 m
- Hole Depth
- 97.5 m
Classification
- Program
- mixed
- Sample Type
- drill
- Mining Method
- open_pit
Location
- Easting
- 421268.1
- Northing
- 472039.2
- CRS
- MRSO Local Grid
- Elevation
- 58.5 m
- Azimuth
- 262 °
- Dip
- -60 °
- Loc. Confidence
- high
QA/QC
- Laboratory
- SGS Malaysia
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- blanks, standards, duplicates, check_assays
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-05-29T00:00:00.000Z
Reasoning: This intercept shows weak gold grade over a moderate width, which is not highly material but contributes to the overall understanding of the deposit.
Negative factors
- Apparent Width Only
Evidence · table
“0.53g/t Au”
Context: 7.6
Rejected tags
Rejected tags — excluded from scoring because their label or evidence could not be verified.
Apparent Width OnlyRejected · negative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Reason: The document explicitly states that reported intervals are downhole lengths and do not represent true widths.
Evidence · text
“The reported intervals are downhole lengths and do not represent true widths. True widths will be determined once geological modelling has been completed.”
MBRDD643Selinsing Gold Mine · goldGrade: 0.43Grade Unit: g/tIntercept: 2 mView all detailsHide details
Identity
- Hole ID
- MBRDD643
- Project
- Selinsing Gold Mine
- Commodity
- gold
- Region
- pahang state in the central gold belt of western malaysia
- Reported Region
- Pahang State in the Central Gold Belt of Western Malaysia
- Ticker
- MMY
Geometry
- Grade
- 0.43
- Grade Unit
- g/t
- Intercept
- 2 m
- From
- 71.5 m
- To
- 73.5 m
- Hole Depth
- 97.5 m
Classification
- Program
- mixed
- Sample Type
- drill
- Mining Method
- open_pit
Location
- Easting
- 421268.1
- Northing
- 472039.2
- CRS
- MRSO Local Grid
- Elevation
- 58.5 m
- Azimuth
- 262 °
- Dip
- -60 °
- Loc. Confidence
- high
QA/QC
- Laboratory
- SGS Malaysia
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- blanks, standards, duplicates, check_assays
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-05-29T00:00:00.000Z
Reasoning: This intercept shows weak gold grade over a narrow width, which is not highly material but contributes to the overall understanding of the deposit.
Negative factors
- Apparent Width Only
Evidence · table
“0.43g/t Au”
Context: 2.0
Rejected tags
Rejected tags — excluded from scoring because their label or evidence could not be verified.
Apparent Width OnlyRejected · negative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Reason: The document explicitly states that reported intervals are downhole lengths and do not represent true widths.
Evidence · text
“The reported intervals are downhole lengths and do not represent true widths. True widths will be determined once geological modelling has been completed.”
MBRDD644Selinsing Gold Mine · goldGrade: 0.31Grade Unit: g/tIntercept: 1.5 mView all detailsHide details
Identity
- Hole ID
- MBRDD644
- Project
- Selinsing Gold Mine
- Commodity
- gold
- Region
- pahang state in the central gold belt of western malaysia
- Reported Region
- Pahang State in the Central Gold Belt of Western Malaysia
- Ticker
- MMY
Geometry
- Grade
- 0.31
- Grade Unit
- g/t
- Intercept
- 1.5 m
- From
- 1.5 m
- To
- 3 m
- Hole Depth
- 120.2 m
Classification
- Program
- mixed
- Sample Type
- drill
- Mining Method
- open_pit
Location
- Easting
- 421277
- Northing
- 471962.4
- CRS
- MRSO Local Grid
- Elevation
- 58.8 m
- Azimuth
- 72 °
- Dip
- -90 °
- Loc. Confidence
- high
QA/QC
- Laboratory
- SGS Malaysia
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- blanks, standards, duplicates, check_assays
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-05-29T00:00:00.000Z
Reasoning: This intercept shows weak gold grade over a very narrow width, which is not highly material but contributes to the overall understanding of the deposit.
Negative factors
- Apparent Width Only
Evidence · table
“0.31g/t Au”
Context: 1.5
Rejected tags
Rejected tags — excluded from scoring because their label or evidence could not be verified.
Apparent Width OnlyRejected · negative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Reason: The document explicitly states that reported intervals are downhole lengths and do not represent true widths.
Evidence · text
“The reported intervals are downhole lengths and do not represent true widths. True widths will be determined once geological modelling has been completed.”
MBRDD644Selinsing Gold Mine · goldGrade: 1.92Grade Unit: g/tIntercept: 5.5 mView all detailsHide details
Identity
- Hole ID
- MBRDD644
- Project
- Selinsing Gold Mine
- Commodity
- gold
- Region
- pahang state in the central gold belt of western malaysia
- Reported Region
- Pahang State in the Central Gold Belt of Western Malaysia
- Ticker
- MMY
Geometry
- Grade
- 1.92
- Grade Unit
- g/t
- Intercept
- 5.5 m
- From
- 16.2 m
- To
- 21.7 m
- Hole Depth
- 120.2 m
Classification
- Program
- mixed
- Sample Type
- drill
- Mining Method
- open_pit
Location
- Easting
- 421277
- Northing
- 471962.4
- CRS
- MRSO Local Grid
- Elevation
- 58.8 m
- Azimuth
- 72 °
- Dip
- -90 °
- Loc. Confidence
- high
QA/QC
- Laboratory
- SGS Malaysia
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- blanks, standards, duplicates, check_assays
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-05-29T00:00:00.000Z
Reasoning: This intercept shows a moderate gold grade over a moderate width, which is a positive indicator within the overall drill program.
Negative factors
- Apparent Width Only
Evidence · table
“1.92/t Au”
Context: 5.5
Rejected tags
Rejected tags — excluded from scoring because their label or evidence could not be verified.
Apparent Width OnlyRejected · negative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Reason: The document explicitly states that reported intervals are downhole lengths and do not represent true widths.
Evidence · text
“The reported intervals are downhole lengths and do not represent true widths. True widths will be determined once geological modelling has been completed.”
MBRDD644Selinsing Gold Mine · goldGrade: 0.99Grade Unit: g/tIntercept: 1.8 mView all detailsHide details
Identity
- Hole ID
- MBRDD644
- Project
- Selinsing Gold Mine
- Commodity
- gold
- Region
- pahang state in the central gold belt of western malaysia
- Reported Region
- Pahang State in the Central Gold Belt of Western Malaysia
- Ticker
- MMY
Geometry
- Grade
- 0.99
- Grade Unit
- g/t
- Intercept
- 1.8 m
- From
- 38.2 m
- To
- 40 m
- Hole Depth
- 120.2 m
Classification
- Program
- mixed
- Sample Type
- drill
- Mining Method
- open_pit
Location
- Easting
- 421277
- Northing
- 471962.4
- CRS
- MRSO Local Grid
- Elevation
- 58.8 m
- Azimuth
- 72 °
- Dip
- -90 °
- Loc. Confidence
- high
QA/QC
- Laboratory
- SGS Malaysia
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- blanks, standards, duplicates, check_assays
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-05-29T00:00:00.000Z
Reasoning: This intercept shows moderate gold grade over a narrow width, which is a positive indicator.
Negative factors
- Apparent Width Only
Evidence · table
“0.99g/t Au”
Context: 1.8
Rejected tags
Rejected tags — excluded from scoring because their label or evidence could not be verified.
Apparent Width OnlyRejected · negative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Reason: The document explicitly states that reported intervals are downhole lengths and do not represent true widths.
Evidence · text
“The reported intervals are downhole lengths and do not represent true widths. True widths will be determined once geological modelling has been completed.”
MBRDD644Selinsing Gold Mine · goldGrade: 1.9Grade Unit: g/tIntercept: 11.5 mView all detailsHide details
Identity
- Hole ID
- MBRDD644
- Project
- Selinsing Gold Mine
- Commodity
- gold
- Region
- pahang state in the central gold belt of western malaysia
- Reported Region
- Pahang State in the Central Gold Belt of Western Malaysia
- Ticker
- MMY
Geometry
- Grade
- 1.9
- Grade Unit
- g/t
- Intercept
- 11.5 m
- From
- 83.6 m
- To
- 95.1 m
- Hole Depth
- 120.2 m
Classification
- Program
- mixed
- Sample Type
- drill
- Mining Method
- open_pit
Location
- Easting
- 421277
- Northing
- 471962.4
- CRS
- MRSO Local Grid
- Elevation
- 58.8 m
- Azimuth
- 72 °
- Dip
- -90 °
- Loc. Confidence
- high
QA/QC
- Laboratory
- SGS Malaysia
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- blanks, standards, duplicates, check_assays
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-05-29T00:00:00.000Z
Reasoning: This intercept shows a moderate gold grade over a significant width, which is a positive result.
Negative factors
- Apparent Width Only
Evidence · table
“1.90g/t Au”
Context: 11.5
Rejected tags
Rejected tags — excluded from scoring because their label or evidence could not be verified.
Apparent Width OnlyRejected · negative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Reason: The document explicitly states that reported intervals are downhole lengths and do not represent true widths.
Evidence · text
“The reported intervals are downhole lengths and do not represent true widths. True widths will be determined once geological modelling has been completed.”
MBRDD645Selinsing Gold Mine · goldGrade: 1.21Grade Unit: g/tIntercept: 1 mView all detailsHide details
Identity
- Hole ID
- MBRDD645
- Project
- Selinsing Gold Mine
- Commodity
- gold
- Region
- pahang state in the central gold belt of western malaysia
- Reported Region
- Pahang State in the Central Gold Belt of Western Malaysia
- Ticker
- MMY
Geometry
- Grade
- 1.21
- Grade Unit
- g/t
- Intercept
- 1 m
- From
- 22.5 m
- To
- 23.5 m
- Hole Depth
- 190 m
Classification
- Program
- mixed
- Sample Type
- drill
- Mining Method
- open_pit
Location
- Easting
- 421367.2
- Northing
- 471470.2
- CRS
- MRSO Local Grid
- Elevation
- 62.5 m
- Azimuth
- 262 °
- Dip
- -50 °
- Loc. Confidence
- high
QA/QC
- Laboratory
- SGS Malaysia
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- blanks, standards, duplicates, check_assays
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-05-29T00:00:00.000Z
Reasoning: This intercept shows a moderate gold grade over a very narrow width, which is a positive indicator.
Negative factors
- Apparent Width Only
Evidence · table
“1.21g/t Au”
Context: 1.0
Rejected tags
Rejected tags — excluded from scoring because their label or evidence could not be verified.
Apparent Width OnlyRejected · negative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Reason: The document explicitly states that reported intervals are downhole lengths and do not represent true widths.
Evidence · text
“The reported intervals are downhole lengths and do not represent true widths. True widths will be determined once geological modelling has been completed.”
MBRDD645Selinsing Gold Mine · goldGrade: 0.24Grade Unit: g/tIntercept: 1.3 mView all detailsHide details
Identity
- Hole ID
- MBRDD645
- Project
- Selinsing Gold Mine
- Commodity
- gold
- Region
- pahang state in the central gold belt of western malaysia
- Reported Region
- Pahang State in the Central Gold Belt of Western Malaysia
- Ticker
- MMY
Geometry
- Grade
- 0.24
- Grade Unit
- g/t
- Intercept
- 1.3 m
- From
- 30.2 m
- To
- 31.5 m
- Hole Depth
- 190 m
Classification
- Program
- mixed
- Sample Type
- drill
- Mining Method
- open_pit
Location
- Easting
- 421367.2
- Northing
- 471470.2
- CRS
- MRSO Local Grid
- Elevation
- 62.5 m
- Azimuth
- 262 °
- Dip
- -50 °
- Loc. Confidence
- high
QA/QC
- Laboratory
- SGS Malaysia
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- blanks, standards, duplicates, check_assays
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-05-29T00:00:00.000Z
Reasoning: This intercept shows weak gold grade over a very narrow width, which is not highly material but contributes to the overall understanding of the deposit.
Negative factors
- Apparent Width Only
Evidence · table
“0.24g/t Au”
Context: 1.3
Rejected tags
Rejected tags — excluded from scoring because their label or evidence could not be verified.
Apparent Width OnlyRejected · negative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Reason: The document explicitly states that reported intervals are downhole lengths and do not represent true widths.
Evidence · text
“The reported intervals are downhole lengths and do not represent true widths. True widths will be determined once geological modelling has been completed.”
MBRDD646Selinsing Gold Mine · goldGrade: 1.47Grade Unit: g/tIntercept: 4.5 mView all detailsHide details
Identity
- Hole ID
- MBRDD646
- Project
- Selinsing Gold Mine
- Commodity
- gold
- Region
- pahang state in the central gold belt of western malaysia
- Reported Region
- Pahang State in the Central Gold Belt of Western Malaysia
- Ticker
- MMY
Geometry
- Grade
- 1.47
- Grade Unit
- g/t
- Intercept
- 4.5 m
- From
- 100.5 m
- To
- 105 m
- Hole Depth
- 140 m
Classification
- Program
- mixed
- Sample Type
- drill
- Mining Method
- open_pit
Location
- Easting
- 421316.4
- Northing
- 471744.7
- CRS
- MRSO Local Grid
- Elevation
- 126 m
- Azimuth
- 262 °
- Dip
- -60 °
- Loc. Confidence
- high
QA/QC
- Laboratory
- SGS Malaysia
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- blanks, standards, duplicates, check_assays
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-05-29T00:00:00.000Z
Reasoning: This intercept shows a moderate gold grade over a moderate width, which is a positive indicator within the overall drill program.
Negative factors
- Apparent Width Only
Evidence · table
“1.47gt Au”
Context: 4.5
Rejected tags
Rejected tags — excluded from scoring because their label or evidence could not be verified.
Apparent Width OnlyRejected · negative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Reason: The document explicitly states that reported intervals are downhole lengths and do not represent true widths.
Evidence · text
“The reported intervals are downhole lengths and do not represent true widths. True widths will be determined once geological modelling has been completed.”
How Atlas produces this analysis
Minestarters Atlas uses automated extraction to summarize mining announcements, identify reported measurements, and classify supporting evidence. Sentiment reflects the extracted narrative and classification rules; it is an interpretation, not a reported measurement. Evidence quotes and context are provided where available. Missing data, low-confidence results, and review flags indicate limitations. Check the original publisher announcement before relying on an interpretation.