MLX: Exploration Update
Original announcement by asx on
- Company
- Metals X Limited
- Ticker
- MLX
- Exchange
- ASX
- Region
- Tasmania
- Primary commodity
- Tin
- Secondary commodities
- Copper
- Document categories
- Drill results
- Extracted
- 2026-10-06 23:20:06 UTC
Analysis by Minestarters Atlas
Atlas analysis published:
Minestarters Atlas analysis
Summary
Metals X Limited has reported new high-grade tin drill results from its Renison Tin Operations in Tasmania, where it holds a 50% interest. Drilling at the Ringrose Prospect intersected significant mineralization, including 6.0m at 2.41% Sn, and identified a previously unrecognised offset suggesting the deposit is open at depth. Further exploration drilling at Ring River returned encouraging results, such as 2.0m at 7.13% Sn, extending mineralization by 200m. These results reinforce the potential to extend the mine life and leverage existing infrastructure.
Reasoning: The announcement reports numerous high-grade tin intercepts from ongoing exploration at Renison, including several exceptional grades. The discovery of a previously unrecognised offset at Ringrose and the extension of mineralization at Ring River demonstrate significant potential to expand the resource and extend mine life, leveraging existing underground infrastructure. The results are JORC compliant with disclosed QA/QC, though true widths are not yet known.
Positive factors
- high_grade_intercepts
- step_out_extension
- new_mineralization_offset_identified
- proximity_to_existing_infrastructure
- jorc_compliant_reporting
- qaqc_disclosed
Negative factors
- apparent_width_only
Low confidence — this extraction should be reviewed alongside the original source.
Facts used in scoring: 54
Classification and evidence
Bonanza Interceptpositive
Exceptionally high-grade zone, well above the deposit-type norm.
Why it applies: Multiple intercepts show exceptional tin grades (e.g., 7.13% Sn, 4.62% Sn, 11.36% Sn, 3.99% Sn, 3.09% Sn, 2.68% Sn, 3.55% Sn) which are well above the default base metal exceptional threshold of 2.5%.
Evidence · text
“S1782: 1.8m at 7.13% Sn from 374m”
Step-Out Extensionpositive
Mineralization extended beyond the previously known limit.
Why it applies: Drilling at Ringrose identified a previously unrecognised offset suggesting the mineralisation is open at depth, and Ring River results align with and extend Renison South Basset mineralisation by 200m.
Evidence · text
“Recent drilling significant intersections have identified a previously unrecognised offset in the mineralisation, suggesting Ringrose is open at depth towards the Pine Hill Granite.”
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: The release includes detailed QA/QC procedures, mentioning NATA/ISO accredited laboratories, insertion of blanks, standards, duplicates, and check assays, and sign-off by a Competent Person.
Evidence · text
“QA/QC is ensured during the sub-sampling stages process via the use of the systems of an independent NATA / ISO accredited laboratory contractor.”
Apparent Width Onlynegative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Why it applies: The document explicitly states that lengths are reported as downhole widths and true widths are not known due to variable ore zone orientations.
Evidence · text
“Lengths have been reported as down hole widths as the ore zone is new and orientations are variable.”
Extracted facts
Stored fact records: 54. Some facts used in scoring do not have a stored record.
Drill Results (54)
S1778Ringrose Prospect · tinGrade: 2.41Grade Unit: %Intercept: 6 mView all detailsHide details
Identity
- Hole ID
- S1778
- Project
- Ringrose Prospect
- Commodity
- tin
- Region
- australia_tas
- Reported Region
- australia_tas
- Ticker
- MLX
Geometry
- Grade
- 2.41
- Grade Unit
- %
- Intercept
- 6 m
- From
- 323 m
- To
- 329 m
- Hole Depth
- 380 m
- Intercept Depth
- 323 m
Classification
- Deposit Type
- skarn
- Program
- exploration
- Sample Type
- drill
- Group ID
- S1778:323-329
- Mining Method
- underground
Location
- Easting
- 43420
- Northing
- 64719
- Elevation
- 270 m
- Azimuth
- 1 °
- Dip
- -81 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- SGS and ALS
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Deleterious
- Deleterious Flag
- No
Metal Equivalent
- Assumptions Disclosed
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-10-06T00:00:00.000Z
Reasoning: This intercept shows a strong tin grade over a moderate width, contributing to the discovery of a new offset in mineralization at Ringrose, suggesting the deposit is open at depth.
Positive factors
- strong_grade
- step_out_extension
- new_mineralization_offset_identified
Negative factors
- apparent_width_only
Evidence · table
“2.41”
Context: 6.0
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
S1778Ringrose Prospect · copperGrade: 0.09Grade Unit: %Intercept: 6 mView all detailsHide details
Identity
- Hole ID
- S1778
- Project
- Ringrose Prospect
- Commodity
- copper
- Region
- australia_tas
- Reported Region
- australia_tas
- Ticker
- MLX
Geometry
- Grade
- 0.09
- Grade Unit
- %
- Intercept
- 6 m
- From
- 323 m
- To
- 329 m
- Hole Depth
- 380 m
- Intercept Depth
- 323 m
Classification
- Deposit Type
- skarn
- Program
- exploration
- Sample Type
- drill
- Group ID
- S1778:323-329
- Mining Method
- underground
Location
- Easting
- 43420
- Northing
- 64719
- Elevation
- 270 m
- Azimuth
- 1 °
- Dip
- -81 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- SGS and ALS
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Deleterious
- Deleterious Flag
- No
Metal Equivalent
- Assumptions Disclosed
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-10-06T00:00:00.000Z
Reasoning: Trace copper grade reported as a byproduct indicator alongside significant tin mineralization.
Evidence · table
“0.09”
Context: 6.0
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
S1778Ringrose Prospect · tinGrade: 1.98Grade Unit: %Intercept: 2.9 mView all detailsHide details
Identity
- Hole ID
- S1778
- Project
- Ringrose Prospect
- Commodity
- tin
- Region
- australia_tas
- Reported Region
- australia_tas
- Ticker
- MLX
Geometry
- Grade
- 1.98
- Grade Unit
- %
- Intercept
- 2.9 m
- From
- 339 m
- To
- 341.9 m
- Hole Depth
- 380 m
- Intercept Depth
- 323 m
Classification
- Deposit Type
- skarn
- Program
- exploration
- Sample Type
- drill
- Group ID
- S1778:339-341.9
- Mining Method
- underground
Location
- Easting
- 43420
- Northing
- 64719
- Elevation
- 270 m
- Azimuth
- 1 °
- Dip
- -81 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- SGS and ALS
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Deleterious
- Deleterious Flag
- No
Metal Equivalent
- Assumptions Disclosed
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-10-06T00:00:00.000Z
Reasoning: This intercept shows a strong tin grade over a narrow width, further defining the new offset in mineralization at Ringrose.
Positive factors
- strong_grade
- step_out_extension
- new_mineralization_offset_identified
Negative factors
- apparent_width_only
Evidence · table
“1.98”
Context: 2.9
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
S1778Ringrose Prospect · copperGrade: 0.15Grade Unit: %Intercept: 2.9 mView all detailsHide details
Identity
- Hole ID
- S1778
- Project
- Ringrose Prospect
- Commodity
- copper
- Region
- australia_tas
- Reported Region
- australia_tas
- Ticker
- MLX
Geometry
- Grade
- 0.15
- Grade Unit
- %
- Intercept
- 2.9 m
- From
- 339 m
- To
- 341.9 m
- Hole Depth
- 380 m
- Intercept Depth
- 323 m
Classification
- Deposit Type
- skarn
- Program
- exploration
- Sample Type
- drill
- Group ID
- S1778:339-341.9
- Mining Method
- underground
Location
- Easting
- 43420
- Northing
- 64719
- Elevation
- 270 m
- Azimuth
- 1 °
- Dip
- -81 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- SGS and ALS
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Deleterious
- Deleterious Flag
- No
Metal Equivalent
- Assumptions Disclosed
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-10-06T00:00:00.000Z
Reasoning: Trace copper grade reported as a byproduct indicator alongside significant tin mineralization.
Evidence · table
“0.15”
Context: 2.9
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
S1777Ringrose Prospect · tinGrade: 1.22Grade Unit: %Intercept: 3 mView all detailsHide details
Identity
- Hole ID
- S1777
- Project
- Ringrose Prospect
- Commodity
- tin
- Region
- australia_tas
- Reported Region
- australia_tas
- Ticker
- MLX
Geometry
- Grade
- 1.22
- Grade Unit
- %
- Intercept
- 3 m
- From
- 332 m
- To
- 335 m
- Hole Depth
- 389.25 m
- Intercept Depth
- 332 m
Classification
- Deposit Type
- skarn
- Program
- exploration
- Sample Type
- drill
- Group ID
- S1777:332-335
- Mining Method
- underground
Location
- Easting
- 43420
- Northing
- 64719
- Elevation
- 270 m
- Azimuth
- 353 °
- Dip
- -78 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- SGS and ALS
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Deleterious
- Deleterious Flag
- No
Metal Equivalent
- Assumptions Disclosed
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-10-06T00:00:00.000Z
Reasoning: This intercept shows a strong tin grade over a narrow width, further defining the new offset in mineralization at Ringrose.
Positive factors
- strong_grade
- step_out_extension
- new_mineralization_offset_identified
Negative factors
- apparent_width_only
Evidence · table
“1.22”
Context: 3.0
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
S1777Ringrose Prospect · copperGrade: 0.1Grade Unit: %Intercept: 3 mView all detailsHide details
Identity
- Hole ID
- S1777
- Project
- Ringrose Prospect
- Commodity
- copper
- Region
- australia_tas
- Reported Region
- australia_tas
- Ticker
- MLX
Geometry
- Grade
- 0.1
- Grade Unit
- %
- Intercept
- 3 m
- From
- 332 m
- To
- 335 m
- Hole Depth
- 389.25 m
- Intercept Depth
- 332 m
Classification
- Deposit Type
- skarn
- Program
- exploration
- Sample Type
- drill
- Group ID
- S1777:332-335
- Mining Method
- underground
Location
- Easting
- 43420
- Northing
- 64719
- Elevation
- 270 m
- Azimuth
- 353 °
- Dip
- -78 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- SGS and ALS
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Deleterious
- Deleterious Flag
- No
Metal Equivalent
- Assumptions Disclosed
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-10-06T00:00:00.000Z
Reasoning: Trace copper grade reported as a byproduct indicator alongside significant tin mineralization.
Evidence · table
“0.10”
Context: 3.0
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
S1782Ring River · tinGrade: 7.13Grade Unit: %Intercept: 2 mView all detailsHide details
Identity
- Hole ID
- S1782
- Project
- Ring River
- Commodity
- tin
- Region
- australia_tas
- Reported Region
- australia_tas
- Ticker
- MLX
Geometry
- Grade
- 7.13
- Grade Unit
- %
- Intercept
- 2 m
- From
- 374 m
- To
- 376 m
- Hole Depth
- 400.3 m
- Intercept Depth
- 374 m
Classification
- Deposit Type
- skarn
- Program
- exploration
- Sample Type
- drill
- Group ID
- S1782:374-376
- Mining Method
- underground
Location
- Easting
- 44584
- Northing
- 64897
- Elevation
- 126 m
- Azimuth
- 287 °
- Dip
- -56 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- SGS and ALS
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Deleterious
- Deleterious Flag
- No
Metal Equivalent
- Assumptions Disclosed
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-10-06T00:00:00.000Z
Reasoning: This intercept shows an exceptional tin grade over a narrow width, extending the Renison South Basset mineralisation at Ring River.
Positive factors
- exceptional_grade
- step_out_extension
Negative factors
- apparent_width_only
Evidence · table
“7.13”
Context: 2.0
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
S1782Ring River · copperGrade: 0.1Grade Unit: %Intercept: 2 mView all detailsHide details
Identity
- Hole ID
- S1782
- Project
- Ring River
- Commodity
- copper
- Region
- australia_tas
- Reported Region
- australia_tas
- Ticker
- MLX
Geometry
- Grade
- 0.1
- Grade Unit
- %
- Intercept
- 2 m
- From
- 374 m
- To
- 376 m
- Hole Depth
- 400.3 m
- Intercept Depth
- 374 m
Classification
- Deposit Type
- skarn
- Program
- exploration
- Sample Type
- drill
- Group ID
- S1782:374-376
- Mining Method
- underground
Location
- Easting
- 44584
- Northing
- 64897
- Elevation
- 126 m
- Azimuth
- 287 °
- Dip
- -56 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- SGS and ALS
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Deleterious
- Deleterious Flag
- No
Metal Equivalent
- Assumptions Disclosed
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-10-06T00:00:00.000Z
Reasoning: Trace copper grade reported as a byproduct indicator alongside significant tin mineralization.
Evidence · table
“0.10”
Context: 2.0
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
S1730Ring River · tinGrade: 2.13Grade Unit: %Intercept: 3.7 mView all detailsHide details
Identity
- Hole ID
- S1730
- Project
- Ring River
- Commodity
- tin
- Region
- australia_tas
- Reported Region
- australia_tas
- Ticker
- MLX
Geometry
- Grade
- 2.13
- Grade Unit
- %
- Intercept
- 3.7 m
- From
- 166.3 m
- To
- 170 m
- Hole Depth
- 560.5 m
- Intercept Depth
- 166.3 m
Classification
- Deposit Type
- skarn
- Program
- exploration
- Sample Type
- drill
- Group ID
- S1730:166.3-170
- Mining Method
- underground
Location
- Easting
- 44461
- Northing
- 64755
- Elevation
- -4 m
- Azimuth
- 301 °
- Dip
- -55 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- SGS and ALS
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Deleterious
- Deleterious Flag
- No
Metal Equivalent
- Assumptions Disclosed
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-10-06T00:00:00.000Z
Reasoning: This intercept shows a strong tin grade over a narrow width, contributing to the extension of mineralization at Ring River.
Positive factors
- strong_grade
- step_out_extension
Negative factors
- apparent_width_only
Evidence · table
“2.13”
Context: 3.7
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
S1730Ring River · copperGrade: 0.29Grade Unit: %Intercept: 3.7 mView all detailsHide details
Identity
- Hole ID
- S1730
- Project
- Ring River
- Commodity
- copper
- Region
- australia_tas
- Reported Region
- australia_tas
- Ticker
- MLX
Geometry
- Grade
- 0.29
- Grade Unit
- %
- Intercept
- 3.7 m
- From
- 166.3 m
- To
- 170 m
- Hole Depth
- 560.5 m
- Intercept Depth
- 166.3 m
Classification
- Deposit Type
- skarn
- Program
- exploration
- Sample Type
- drill
- Group ID
- S1730:166.3-170
- Mining Method
- underground
Location
- Easting
- 44461
- Northing
- 64755
- Elevation
- -4 m
- Azimuth
- 301 °
- Dip
- -55 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- SGS and ALS
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Deleterious
- Deleterious Flag
- No
Metal Equivalent
- Assumptions Disclosed
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-10-06T00:00:00.000Z
Reasoning: Trace copper grade reported as a byproduct indicator alongside significant tin mineralization.
Evidence · table
“0.29”
Context: 3.7
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
S1780Ring River · tinGrade: 4.62Grade Unit: %Intercept: 1.7 mView all detailsHide details
Identity
- Hole ID
- S1780
- Project
- Ring River
- Commodity
- tin
- Region
- australia_tas
- Reported Region
- australia_tas
- Ticker
- MLX
Geometry
- Grade
- 4.62
- Grade Unit
- %
- Intercept
- 1.7 m
- From
- 350 m
- To
- 351.7 m
- Hole Depth
- 422.5 m
- Intercept Depth
- 350 m
Classification
- Deposit Type
- skarn
- Program
- exploration
- Sample Type
- drill
- Group ID
- S1780:350-351.7
- Mining Method
- underground
Location
- Easting
- 44584
- Northing
- 64897
- Elevation
- 126 m
- Azimuth
- 304 °
- Dip
- -59 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- SGS and ALS
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Deleterious
- Deleterious Flag
- No
Metal Equivalent
- Assumptions Disclosed
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-10-06T00:00:00.000Z
Reasoning: This intercept shows an exceptional tin grade over a narrow width, contributing to the extension of mineralization at Ring River.
Positive factors
- exceptional_grade
- step_out_extension
Negative factors
- apparent_width_only
Evidence · table
“4.62”
Context: 1.7
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
S1780Ring River · copperGrade: 0.11Grade Unit: %Intercept: 1.7 mView all detailsHide details
Identity
- Hole ID
- S1780
- Project
- Ring River
- Commodity
- copper
- Region
- australia_tas
- Reported Region
- australia_tas
- Ticker
- MLX
Geometry
- Grade
- 0.11
- Grade Unit
- %
- Intercept
- 1.7 m
- From
- 350 m
- To
- 351.7 m
- Hole Depth
- 422.5 m
- Intercept Depth
- 350 m
Classification
- Deposit Type
- skarn
- Program
- exploration
- Sample Type
- drill
- Group ID
- S1780:350-351.7
- Mining Method
- underground
Location
- Easting
- 44584
- Northing
- 64897
- Elevation
- 126 m
- Azimuth
- 304 °
- Dip
- -59 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- SGS and ALS
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Deleterious
- Deleterious Flag
- No
Metal Equivalent
- Assumptions Disclosed
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-10-06T00:00:00.000Z
Reasoning: Trace copper grade reported as a byproduct indicator alongside significant tin mineralization.
Evidence · table
“0.11”
Context: 1.7
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
S1772Ring River · tinGrade: 1.82Grade Unit: %Intercept: 3.2 mView all detailsHide details
Identity
- Hole ID
- S1772
- Project
- Ring River
- Commodity
- tin
- Region
- australia_tas
- Reported Region
- australia_tas
- Ticker
- MLX
Geometry
- Grade
- 1.82
- Grade Unit
- %
- Intercept
- 3.2 m
- From
- 171.8 m
- To
- 175 m
- Hole Depth
- 278.4 m
- Intercept Depth
- 171.8 m
Classification
- Deposit Type
- skarn
- Program
- exploration
- Sample Type
- drill
- Group ID
- S1772:171.8-175
- Mining Method
- underground
Location
- Easting
- 43536
- Northing
- 64820
- Elevation
- 247 m
- Azimuth
- 349 °
- Dip
- -59 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- SGS and ALS
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Deleterious
- Deleterious Flag
- No
Metal Equivalent
- Assumptions Disclosed
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-10-06T00:00:00.000Z
Reasoning: This intercept shows a strong tin grade over a narrow width, contributing to the extension of mineralization at Ring River.
Positive factors
- strong_grade
- step_out_extension
Negative factors
- apparent_width_only
Evidence · table
“1.82”
Context: 3.2
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
S1772Ring River · copperGrade: 0.1Grade Unit: %Intercept: 3.2 mView all detailsHide details
Identity
- Hole ID
- S1772
- Project
- Ring River
- Commodity
- copper
- Region
- australia_tas
- Reported Region
- australia_tas
- Ticker
- MLX
Geometry
- Grade
- 0.1
- Grade Unit
- %
- Intercept
- 3.2 m
- From
- 171.8 m
- To
- 175 m
- Hole Depth
- 278.4 m
- Intercept Depth
- 171.8 m
Classification
- Deposit Type
- skarn
- Program
- exploration
- Sample Type
- drill
- Group ID
- S1772:171.8-175
- Mining Method
- underground
Location
- Easting
- 43536
- Northing
- 64820
- Elevation
- 247 m
- Azimuth
- 349 °
- Dip
- -59 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- SGS and ALS
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Deleterious
- Deleterious Flag
- No
Metal Equivalent
- Assumptions Disclosed
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-10-06T00:00:00.000Z
Reasoning: Trace copper grade reported as a byproduct indicator alongside significant tin mineralization.
Evidence · table
“0.10”
Context: 3.2
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
S1779Ring River · tinGrade: 1.52Grade Unit: %Intercept: 3.5 mView all detailsHide details
Identity
- Hole ID
- S1779
- Project
- Ring River
- Commodity
- tin
- Region
- australia_tas
- Reported Region
- australia_tas
- Ticker
- MLX
Geometry
- Grade
- 1.52
- Grade Unit
- %
- Intercept
- 3.5 m
- From
- 334.9 m
- To
- 338.4 m
- Hole Depth
- 431.3 m
- Intercept Depth
- 334.9 m
Classification
- Deposit Type
- skarn
- Program
- exploration
- Sample Type
- drill
- Group ID
- S1779:334.9-338.4
- Mining Method
- underground
Location
- Easting
- 44584
- Northing
- 64897
- Elevation
- 126 m
- Azimuth
- 318 °
- Dip
- -54 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- SGS and ALS
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Deleterious
- Deleterious Flag
- No
Metal Equivalent
- Assumptions Disclosed
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-10-06T00:00:00.000Z
Reasoning: This intercept shows a strong tin grade over a narrow width, contributing to the extension of mineralization at Ring River.
Positive factors
- strong_grade
- step_out_extension
Negative factors
- apparent_width_only
Evidence · table
“1.52”
Context: 3.5
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
S1779Ring River · copperGrade: 0.08Grade Unit: %Intercept: 3.5 mView all detailsHide details
Identity
- Hole ID
- S1779
- Project
- Ring River
- Commodity
- copper
- Region
- australia_tas
- Reported Region
- australia_tas
- Ticker
- MLX
Geometry
- Grade
- 0.08
- Grade Unit
- %
- Intercept
- 3.5 m
- From
- 334.9 m
- To
- 338.4 m
- Hole Depth
- 431.3 m
- Intercept Depth
- 334.9 m
Classification
- Deposit Type
- skarn
- Program
- exploration
- Sample Type
- drill
- Group ID
- S1779:334.9-338.4
- Mining Method
- underground
Location
- Easting
- 44584
- Northing
- 64897
- Elevation
- 126 m
- Azimuth
- 318 °
- Dip
- -54 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- SGS and ALS
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Deleterious
- Deleterious Flag
- No
Metal Equivalent
- Assumptions Disclosed
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-10-06T00:00:00.000Z
Reasoning: Trace copper grade reported as a byproduct indicator alongside significant tin mineralization.
Evidence · table
“0.08”
Context: 3.5
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
S1779Ring River · tinGrade: 2.15Grade Unit: %Intercept: 2 mView all detailsHide details
Identity
- Hole ID
- S1779
- Project
- Ring River
- Commodity
- tin
- Region
- australia_tas
- Reported Region
- australia_tas
- Ticker
- MLX
Geometry
- Grade
- 2.15
- Grade Unit
- %
- Intercept
- 2 m
- From
- 375 m
- To
- 377 m
- Hole Depth
- 431.3 m
- Intercept Depth
- 334.9 m
Classification
- Deposit Type
- skarn
- Program
- exploration
- Sample Type
- drill
- Group ID
- S1779:375-377
- Mining Method
- underground
Location
- Easting
- 44584
- Northing
- 64897
- Elevation
- 126 m
- Azimuth
- 318 °
- Dip
- -54 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- SGS and ALS
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Deleterious
- Deleterious Flag
- No
Metal Equivalent
- Assumptions Disclosed
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-10-06T00:00:00.000Z
Reasoning: This intercept shows a strong tin grade over a narrow width, contributing to the extension of mineralization at Ring River.
Positive factors
- strong_grade
- step_out_extension
Negative factors
- apparent_width_only
Evidence · table
“2.15”
Context: 2.0
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
S1779Ring River · copperGrade: 0.09Grade Unit: %Intercept: 2 mView all detailsHide details
Identity
- Hole ID
- S1779
- Project
- Ring River
- Commodity
- copper
- Region
- australia_tas
- Reported Region
- australia_tas
- Ticker
- MLX
Geometry
- Grade
- 0.09
- Grade Unit
- %
- Intercept
- 2 m
- From
- 375 m
- To
- 377 m
- Hole Depth
- 431.3 m
- Intercept Depth
- 334.9 m
Classification
- Deposit Type
- skarn
- Program
- exploration
- Sample Type
- drill
- Group ID
- S1779:375-377
- Mining Method
- underground
Location
- Easting
- 44584
- Northing
- 64897
- Elevation
- 126 m
- Azimuth
- 318 °
- Dip
- -54 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- SGS and ALS
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Deleterious
- Deleterious Flag
- No
Metal Equivalent
- Assumptions Disclosed
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-10-06T00:00:00.000Z
Reasoning: Trace copper grade reported as a byproduct indicator alongside significant tin mineralization.
Evidence · table
“0.09”
Context: 2.0
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
S1768Ring River · tinGrade: 1.36Grade Unit: %Intercept: 3 mView all detailsHide details
Identity
- Hole ID
- S1768
- Project
- Ring River
- Commodity
- tin
- Region
- australia_tas
- Reported Region
- australia_tas
- Ticker
- MLX
Geometry
- Grade
- 1.36
- Grade Unit
- %
- Intercept
- 3 m
- From
- 374 m
- To
- 377 m
- Hole Depth
- 403 m
- Intercept Depth
- 374 m
Classification
- Deposit Type
- skarn
- Program
- exploration
- Sample Type
- drill
- Group ID
- S1768:374-377
- Mining Method
- underground
Location
- Easting
- 44584
- Northing
- 64897
- Elevation
- 126 m
- Azimuth
- 301 °
- Dip
- -54 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- SGS and ALS
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Deleterious
- Deleterious Flag
- No
Metal Equivalent
- Assumptions Disclosed
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-10-06T00:00:00.000Z
Reasoning: This intercept shows a strong tin grade over a narrow width, contributing to the extension of mineralization at Ring River.
Positive factors
- strong_grade
- step_out_extension
Negative factors
- apparent_width_only
Evidence · table
“1.36”
Context: 3.0
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
S1768Ring River · copperGrade: 0.08Grade Unit: %Intercept: 3 mView all detailsHide details
Identity
- Hole ID
- S1768
- Project
- Ring River
- Commodity
- copper
- Region
- australia_tas
- Reported Region
- australia_tas
- Ticker
- MLX
Geometry
- Grade
- 0.08
- Grade Unit
- %
- Intercept
- 3 m
- From
- 374 m
- To
- 377 m
- Hole Depth
- 403 m
- Intercept Depth
- 374 m
Classification
- Deposit Type
- skarn
- Program
- exploration
- Sample Type
- drill
- Group ID
- S1768:374-377
- Mining Method
- underground
Location
- Easting
- 44584
- Northing
- 64897
- Elevation
- 126 m
- Azimuth
- 301 °
- Dip
- -54 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- SGS and ALS
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Deleterious
- Deleterious Flag
- No
Metal Equivalent
- Assumptions Disclosed
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-10-06T00:00:00.000Z
Reasoning: Trace copper grade reported as a byproduct indicator alongside significant tin mineralization.
Evidence · table
“0.08”
Context: 3.0
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
S1782Ring River · tinGrade: 3.55Grade Unit: %Intercept: 1 mView all detailsHide details
Identity
- Hole ID
- S1782
- Project
- Ring River
- Commodity
- tin
- Region
- australia_tas
- Reported Region
- australia_tas
- Ticker
- MLX
Geometry
- Grade
- 3.55
- Grade Unit
- %
- Intercept
- 1 m
- From
- 306.9 m
- To
- 307.9 m
- Hole Depth
- 400.3 m
- Intercept Depth
- 306.9 m
Classification
- Deposit Type
- skarn
- Program
- exploration
- Sample Type
- drill
- Group ID
- S1782:306.9-307.9
- Mining Method
- underground
Location
- Easting
- 44584
- Northing
- 64897
- Elevation
- 126 m
- Azimuth
- 287 °
- Dip
- -56 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- SGS and ALS
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Deleterious
- Deleterious Flag
- No
Metal Equivalent
- Assumptions Disclosed
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-10-06T00:00:00.000Z
Reasoning: This intercept shows an exceptional tin grade over a narrow width, contributing to the extension of mineralization at Ring River.
Positive factors
- exceptional_grade
- step_out_extension
Negative factors
- apparent_width_only
Evidence · table
“3.55”
Context: 1.0
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
S1782Ring River · copperGrade: 0.35Grade Unit: %Intercept: 1 mView all detailsHide details
Identity
- Hole ID
- S1782
- Project
- Ring River
- Commodity
- copper
- Region
- australia_tas
- Reported Region
- australia_tas
- Ticker
- MLX
Geometry
- Grade
- 0.35
- Grade Unit
- %
- Intercept
- 1 m
- From
- 306.9 m
- To
- 307.9 m
- Hole Depth
- 400.3 m
- Intercept Depth
- 306.9 m
Classification
- Deposit Type
- skarn
- Program
- exploration
- Sample Type
- drill
- Group ID
- S1782:306.9-307.9
- Mining Method
- underground
Location
- Easting
- 44584
- Northing
- 64897
- Elevation
- 126 m
- Azimuth
- 287 °
- Dip
- -56 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- SGS and ALS
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Deleterious
- Deleterious Flag
- No
Metal Equivalent
- Assumptions Disclosed
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-10-06T00:00:00.000Z
Reasoning: Trace copper grade reported as a byproduct indicator alongside significant tin mineralization.
Evidence · table
“0.35”
Context: 1.0
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
S1730Ring River · tinGrade: 1.38Grade Unit: %Intercept: 2 mView all detailsHide details
Identity
- Hole ID
- S1730
- Project
- Ring River
- Commodity
- tin
- Region
- australia_tas
- Reported Region
- australia_tas
- Ticker
- MLX
Geometry
- Grade
- 1.38
- Grade Unit
- %
- Intercept
- 2 m
- From
- 530 m
- To
- 532 m
- Hole Depth
- 560.5 m
- Intercept Depth
- 166.3 m
Classification
- Deposit Type
- skarn
- Program
- exploration
- Sample Type
- drill
- Group ID
- S1730:530-532
- Mining Method
- underground
Location
- Easting
- 44542
- Northing
- 64699
- Elevation
- 127 m
- Azimuth
- 301 °
- Dip
- -55 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- SGS and ALS
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Deleterious
- Deleterious Flag
- No
Metal Equivalent
- Assumptions Disclosed
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-10-06T00:00:00.000Z
Reasoning: This intercept shows a strong tin grade over a narrow width, contributing to the extension of mineralization at Ring River.
Positive factors
- strong_grade
- step_out_extension
Negative factors
- apparent_width_only
Evidence · table
“1.38”
Context: 2.0
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
S1730Ring River · copperGrade: 0.04Grade Unit: %Intercept: 2 mView all detailsHide details
Identity
- Hole ID
- S1730
- Project
- Ring River
- Commodity
- copper
- Region
- australia_tas
- Reported Region
- australia_tas
- Ticker
- MLX
Geometry
- Grade
- 0.04
- Grade Unit
- %
- Intercept
- 2 m
- From
- 530 m
- To
- 532 m
- Hole Depth
- 560.5 m
- Intercept Depth
- 166.3 m
Classification
- Deposit Type
- skarn
- Program
- exploration
- Sample Type
- drill
- Group ID
- S1730:530-532
- Mining Method
- underground
Location
- Easting
- 44542
- Northing
- 64699
- Elevation
- 127 m
- Azimuth
- 301 °
- Dip
- -55 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- SGS and ALS
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Deleterious
- Deleterious Flag
- No
Metal Equivalent
- Assumptions Disclosed
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-10-06T00:00:00.000Z
Reasoning: Trace copper grade reported as a byproduct indicator alongside significant tin mineralization.
Evidence · table
“0.04”
Context: 2.0
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
S1752Ring River · tinGrade: 0.79Grade Unit: %Intercept: 2.8 mView all detailsHide details
Identity
- Hole ID
- S1752
- Project
- Ring River
- Commodity
- tin
- Region
- australia_tas
- Reported Region
- australia_tas
- Ticker
- MLX
Geometry
- Grade
- 0.79
- Grade Unit
- %
- Intercept
- 2.8 m
- From
- 172.2 m
- To
- 175 m
- Hole Depth
- 698 m
- Intercept Depth
- 172.2 m
Classification
- Deposit Type
- skarn
- Program
- exploration
- Sample Type
- drill
- Group ID
- S1752:172.2-175
- Mining Method
- underground
Location
- Easting
- 44541
- Northing
- 64699
- Elevation
- 127 m
- Azimuth
- 314 °
- Dip
- -48 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- SGS and ALS
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Deleterious
- Deleterious Flag
- No
Metal Equivalent
- Assumptions Disclosed
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-10-06T00:00:00.000Z
Reasoning: This intercept shows a moderate tin grade over a narrow width, contributing to the extension of mineralization at Ring River.
Positive factors
- moderate_grade
- step_out_extension
Negative factors
- apparent_width_only
Evidence · table
“0.79”
Context: 2.8
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
S1752Ring River · copperGrade: 0.21Grade Unit: %Intercept: 2.8 mView all detailsHide details
Identity
- Hole ID
- S1752
- Project
- Ring River
- Commodity
- copper
- Region
- australia_tas
- Reported Region
- australia_tas
- Ticker
- MLX
Geometry
- Grade
- 0.21
- Grade Unit
- %
- Intercept
- 2.8 m
- From
- 172.2 m
- To
- 175 m
- Hole Depth
- 698 m
- Intercept Depth
- 172.2 m
Classification
- Deposit Type
- skarn
- Program
- exploration
- Sample Type
- drill
- Group ID
- S1752:172.2-175
- Mining Method
- underground
Location
- Easting
- 44541
- Northing
- 64699
- Elevation
- 127 m
- Azimuth
- 314 °
- Dip
- -48 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- SGS and ALS
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Deleterious
- Deleterious Flag
- No
Metal Equivalent
- Assumptions Disclosed
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-10-06T00:00:00.000Z
Reasoning: Trace copper grade reported as a byproduct indicator alongside significant tin mineralization.
Evidence · table
“0.21”
Context: 2.8
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
S1709Ringrose Prospect · tinGrade: 1.57Grade Unit: %Intercept: 28.5 mView all detailsHide details
Identity
- Hole ID
- S1709
- Project
- Ringrose Prospect
- Commodity
- tin
- Region
- australia_tas
- Reported Region
- australia_tas
- Ticker
- MLX
Geometry
- Grade
- 1.57
- Grade Unit
- %
- Intercept
- 28.5 m
- From
- 277.5 m
- To
- 306 m
- Hole Depth
- 363.65 m
- Intercept Depth
- 277.5 m
Classification
- Deposit Type
- skarn
- Program
- exploration
- Sample Type
- drill
- Group ID
- S1709:277.5-306
- Mining Method
- underground
Location
- Easting
- 43286
- Northing
- 64966
- Elevation
- 285 m
- Azimuth
- 110 °
- Dip
- -57 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- SGS and ALS
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Deleterious
- Deleterious Flag
- No
Metal Equivalent
- Assumptions Disclosed
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-10-06T00:00:00.000Z
Reasoning: This intercept shows a strong tin grade over a significant width, contributing to the understanding of mineralization at Ringrose.
Positive factors
- strong_grade
- strong_continuity
Negative factors
- apparent_width_only
Evidence · table
“1.57”
Context: 28.5
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
S1709Ringrose Prospect · copperGrade: 0.2Grade Unit: %Intercept: 28.5 mView all detailsHide details
Identity
- Hole ID
- S1709
- Project
- Ringrose Prospect
- Commodity
- copper
- Region
- australia_tas
- Reported Region
- australia_tas
- Ticker
- MLX
Geometry
- Grade
- 0.2
- Grade Unit
- %
- Intercept
- 28.5 m
- From
- 277.5 m
- To
- 306 m
- Hole Depth
- 363.65 m
- Intercept Depth
- 277.5 m
Classification
- Deposit Type
- skarn
- Program
- exploration
- Sample Type
- drill
- Group ID
- S1709:277.5-306
- Mining Method
- underground
Location
- Easting
- 43286
- Northing
- 64966
- Elevation
- 285 m
- Azimuth
- 110 °
- Dip
- -57 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- SGS and ALS
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Deleterious
- Deleterious Flag
- No
Metal Equivalent
- Assumptions Disclosed
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-10-06T00:00:00.000Z
Reasoning: Trace copper grade reported as a byproduct indicator alongside significant tin mineralization.
Evidence · table
“0.20”
Context: 28.5
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
S1712Ringrose Prospect · tinGrade: 3.99Grade Unit: %Intercept: 4 mView all detailsHide details
Identity
- Hole ID
- S1712
- Project
- Ringrose Prospect
- Commodity
- tin
- Region
- australia_tas
- Reported Region
- australia_tas
- Ticker
- MLX
Geometry
- Grade
- 3.99
- Grade Unit
- %
- Intercept
- 4 m
- From
- 164 m
- To
- 168 m
- Hole Depth
- 467 m
- Intercept Depth
- 164 m
Classification
- Deposit Type
- skarn
- Program
- exploration
- Sample Type
- drill
- Group ID
- S1712:164-168
- Mining Method
- underground
Location
- Easting
- 43536
- Northing
- 64823
- Elevation
- 247 m
- Azimuth
- 27 °
- Dip
- -57 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- SGS and ALS
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Deleterious
- Deleterious Flag
- No
Metal Equivalent
- Assumptions Disclosed
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-10-06T00:00:00.000Z
Reasoning: This intercept shows an exceptional tin grade over a narrow width, contributing to the understanding of mineralization at Ringrose.
Positive factors
- exceptional_grade
Negative factors
- apparent_width_only
Evidence · table
“3.99”
Context: 4.0
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
S1712Ringrose Prospect · copperGrade: 0.1Grade Unit: %Intercept: 4 mView all detailsHide details
Identity
- Hole ID
- S1712
- Project
- Ringrose Prospect
- Commodity
- copper
- Region
- australia_tas
- Reported Region
- australia_tas
- Ticker
- MLX
Geometry
- Grade
- 0.1
- Grade Unit
- %
- Intercept
- 4 m
- From
- 164 m
- To
- 168 m
- Hole Depth
- 467 m
- Intercept Depth
- 164 m
Classification
- Deposit Type
- skarn
- Program
- exploration
- Sample Type
- drill
- Group ID
- S1712:164-168
- Mining Method
- underground
Location
- Easting
- 43536
- Northing
- 64823
- Elevation
- 247 m
- Azimuth
- 27 °
- Dip
- -57 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- SGS and ALS
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Deleterious
- Deleterious Flag
- No
Metal Equivalent
- Assumptions Disclosed
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-10-06T00:00:00.000Z
Reasoning: Trace copper grade reported as a byproduct indicator alongside significant tin mineralization.
Evidence · table
“0.10”
Context: 4.0
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
S1693Ringrose Prospect · tinGrade: 0.66Grade Unit: %Intercept: 22 mView all detailsHide details
Identity
- Hole ID
- S1693
- Project
- Ringrose Prospect
- Commodity
- tin
- Region
- australia_tas
- Reported Region
- australia_tas
- Ticker
- MLX
Geometry
- Grade
- 0.66
- Grade Unit
- %
- Intercept
- 22 m
- From
- 160 m
- To
- 182 m
- Hole Depth
- 282.07 m
- Intercept Depth
- 160 m
Classification
- Deposit Type
- skarn
- Program
- exploration
- Sample Type
- drill
- Group ID
- S1693:160-182
- Mining Method
- underground
Location
- Easting
- 43532
- Northing
- 64825
- Elevation
- 247 m
- Azimuth
- 338 °
- Dip
- -78 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- SGS and ALS
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Deleterious
- Deleterious Flag
- No
Metal Equivalent
- Assumptions Disclosed
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-10-06T00:00:00.000Z
Reasoning: This intercept shows a moderate tin grade over a significant width, contributing to the understanding of mineralization at Ringrose.
Positive factors
- moderate_grade
- strong_continuity
Negative factors
- apparent_width_only
Evidence · table
“0.66”
Context: 22.0
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
S1693Ringrose Prospect · copperGrade: 0Grade Unit: %Intercept: 22 mView all detailsHide details
Identity
- Hole ID
- S1693
- Project
- Ringrose Prospect
- Commodity
- copper
- Region
- australia_tas
- Reported Region
- australia_tas
- Ticker
- MLX
Geometry
- Grade
- 0
- Grade Unit
- %
- Intercept
- 22 m
- From
- 160 m
- To
- 182 m
- Hole Depth
- 282.07 m
- Intercept Depth
- 160 m
Classification
- Deposit Type
- skarn
- Program
- exploration
- Sample Type
- drill
- Group ID
- S1693:160-182
- Mining Method
- underground
Location
- Easting
- 43532
- Northing
- 64825
- Elevation
- 247 m
- Azimuth
- 338 °
- Dip
- -78 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- SGS and ALS
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Deleterious
- Deleterious Flag
- No
Metal Equivalent
- Assumptions Disclosed
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-10-06T00:00:00.000Z
Reasoning: No copper grade reported as a byproduct indicator alongside tin mineralization.
Evidence · table
“0.00”
Context: 22.0
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
S1708ARingrose Prospect · tinGrade: 1.17Grade Unit: %Intercept: 9.6 mView all detailsHide details
Identity
- Hole ID
- S1708A
- Project
- Ringrose Prospect
- Commodity
- tin
- Region
- australia_tas
- Reported Region
- australia_tas
- Ticker
- MLX
Geometry
- Grade
- 1.17
- Grade Unit
- %
- Intercept
- 9.6 m
- From
- 241 m
- To
- 250.6 m
- Hole Depth
- 361.6 m
- Intercept Depth
- 241 m
Classification
- Deposit Type
- skarn
- Program
- exploration
- Sample Type
- drill
- Group ID
- S1708A:241-250.6
- Mining Method
- underground
Location
- Easting
- 43285
- Northing
- 64967
- Elevation
- 285 m
- Azimuth
- 103 °
- Dip
- -67 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- SGS and ALS
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Deleterious
- Deleterious Flag
- No
Metal Equivalent
- Assumptions Disclosed
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-10-06T00:00:00.000Z
Reasoning: This intercept shows a strong tin grade over a moderate width, contributing to the understanding of mineralization at Ringrose.
Positive factors
- strong_grade
- moderate_continuity
Negative factors
- apparent_width_only
Evidence · table
“1.17”
Context: 9.6
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
S1708ARingrose Prospect · copperGrade: 0Grade Unit: %Intercept: 9.6 mView all detailsHide details
Identity
- Hole ID
- S1708A
- Project
- Ringrose Prospect
- Commodity
- copper
- Region
- australia_tas
- Reported Region
- australia_tas
- Ticker
- MLX
Geometry
- Grade
- 0
- Grade Unit
- %
- Intercept
- 9.6 m
- From
- 241 m
- To
- 250.6 m
- Hole Depth
- 361.6 m
- Intercept Depth
- 241 m
Classification
- Deposit Type
- skarn
- Program
- exploration
- Sample Type
- drill
- Group ID
- S1708A:241-250.6
- Mining Method
- underground
Location
- Easting
- 43285
- Northing
- 64967
- Elevation
- 285 m
- Azimuth
- 103 °
- Dip
- -67 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- SGS and ALS
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Deleterious
- Deleterious Flag
- No
Metal Equivalent
- Assumptions Disclosed
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-10-06T00:00:00.000Z
Reasoning: No copper grade reported as a byproduct indicator alongside tin mineralization.
Evidence · table
“0.00”
Context: 9.6
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
S1769Ringrose Prospect · tinGrade: 1.67Grade Unit: %Intercept: 7.4 mView all detailsHide details
Identity
- Hole ID
- S1769
- Project
- Ringrose Prospect
- Commodity
- tin
- Region
- australia_tas
- Reported Region
- australia_tas
- Ticker
- MLX
Geometry
- Grade
- 1.67
- Grade Unit
- %
- Intercept
- 7.4 m
- From
- 97 m
- To
- 104.4 m
- Hole Depth
- 215.87 m
- Intercept Depth
- 97 m
Classification
- Deposit Type
- skarn
- Program
- exploration
- Sample Type
- drill
- Group ID
- S1769:97-104.4
- Mining Method
- underground
Location
- Easting
- 43562
- Northing
- 64920
- Elevation
- 230 m
- Azimuth
- 337 °
- Dip
- -83 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- SGS and ALS
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Deleterious
- Deleterious Flag
- No
Metal Equivalent
- Assumptions Disclosed
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-10-06T00:00:00.000Z
Reasoning: This intercept shows a strong tin grade over a moderate width, contributing to the understanding of mineralization at Ringrose.
Positive factors
- strong_grade
- moderate_continuity
Negative factors
- apparent_width_only
Evidence · table
“1.67”
Context: 7.4
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
S1769Ringrose Prospect · copperGrade: 0.24Grade Unit: %Intercept: 7.4 mView all detailsHide details
Identity
- Hole ID
- S1769
- Project
- Ringrose Prospect
- Commodity
- copper
- Region
- australia_tas
- Reported Region
- australia_tas
- Ticker
- MLX
Geometry
- Grade
- 0.24
- Grade Unit
- %
- Intercept
- 7.4 m
- From
- 97 m
- To
- 104.4 m
- Hole Depth
- 215.87 m
- Intercept Depth
- 97 m
Classification
- Deposit Type
- skarn
- Program
- exploration
- Sample Type
- drill
- Group ID
- S1769:97-104.4
- Mining Method
- underground
Location
- Easting
- 43562
- Northing
- 64920
- Elevation
- 230 m
- Azimuth
- 337 °
- Dip
- -83 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- SGS and ALS
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Deleterious
- Deleterious Flag
- No
Metal Equivalent
- Assumptions Disclosed
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-10-06T00:00:00.000Z
Reasoning: Trace copper grade reported as a byproduct indicator alongside significant tin mineralization.
Evidence · table
“0.24”
Context: 7.4
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
S1745Ringrose Prospect · tinGrade: 11.36Grade Unit: %Intercept: 1 mView all detailsHide details
Identity
- Hole ID
- S1745
- Project
- Ringrose Prospect
- Commodity
- tin
- Region
- australia_tas
- Reported Region
- australia_tas
- Ticker
- MLX
Geometry
- Grade
- 11.36
- Grade Unit
- %
- Intercept
- 1 m
- From
- 95 m
- To
- 96 m
- Hole Depth
- 123.2 m
- Intercept Depth
- 95 m
Classification
- Deposit Type
- skarn
- Program
- exploration
- Sample Type
- drill
- Group ID
- S1745:95-96
- Mining Method
- underground
Location
- Easting
- 43625
- Northing
- 64876
- Elevation
- 222 m
- Azimuth
- 82 °
- Dip
- -53 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- SGS and ALS
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Deleterious
- Deleterious Flag
- No
Metal Equivalent
- Assumptions Disclosed
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-10-06T00:00:00.000Z
Reasoning: This intercept shows an exceptional tin grade over a narrow width, contributing to the understanding of mineralization at Ringrose.
Positive factors
- exceptional_grade
Negative factors
- apparent_width_only
Evidence · table
“11.36”
Context: 1.0
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
S1745Ringrose Prospect · copperGrade: 0.1Grade Unit: %Intercept: 1 mView all detailsHide details
Identity
- Hole ID
- S1745
- Project
- Ringrose Prospect
- Commodity
- copper
- Region
- australia_tas
- Reported Region
- australia_tas
- Ticker
- MLX
Geometry
- Grade
- 0.1
- Grade Unit
- %
- Intercept
- 1 m
- From
- 95 m
- To
- 96 m
- Hole Depth
- 123.2 m
- Intercept Depth
- 95 m
Classification
- Deposit Type
- skarn
- Program
- exploration
- Sample Type
- drill
- Group ID
- S1745:95-96
- Mining Method
- underground
Location
- Easting
- 43625
- Northing
- 64876
- Elevation
- 222 m
- Azimuth
- 82 °
- Dip
- -53 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- SGS and ALS
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Deleterious
- Deleterious Flag
- No
Metal Equivalent
- Assumptions Disclosed
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-10-06T00:00:00.000Z
Reasoning: Trace copper grade reported as a byproduct indicator alongside significant tin mineralization.
Evidence · table
“0.10”
Context: 1.0
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
S1695Ringrose Prospect · tinGrade: 2.25Grade Unit: %Intercept: 4.2 mView all detailsHide details
Identity
- Hole ID
- S1695
- Project
- Ringrose Prospect
- Commodity
- tin
- Region
- australia_tas
- Reported Region
- australia_tas
- Ticker
- MLX
Geometry
- Grade
- 2.25
- Grade Unit
- %
- Intercept
- 4.2 m
- From
- 111.1 m
- To
- 115.3 m
- Hole Depth
- 740.9 m
- Intercept Depth
- 111.1 m
Classification
- Deposit Type
- skarn
- Program
- exploration
- Sample Type
- drill
- Group ID
- S1695:111.1-115.3
- Mining Method
- underground
Location
- Easting
- 43553
- Northing
- 64919
- Elevation
- 231 m
- Azimuth
- 315 °
- Dip
- -70 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- SGS and ALS
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Deleterious
- Deleterious Flag
- No
Metal Equivalent
- Assumptions Disclosed
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-10-06T00:00:00.000Z
Reasoning: This intercept shows a strong tin grade over a narrow width, contributing to the understanding of mineralization at Ringrose.
Positive factors
- strong_grade
Negative factors
- apparent_width_only
Evidence · table
“2.25”
Context: 4.2
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
S1695Ringrose Prospect · copperGrade: 0Grade Unit: %Intercept: 4.2 mView all detailsHide details
Identity
- Hole ID
- S1695
- Project
- Ringrose Prospect
- Commodity
- copper
- Region
- australia_tas
- Reported Region
- australia_tas
- Ticker
- MLX
Geometry
- Grade
- 0
- Grade Unit
- %
- Intercept
- 4.2 m
- From
- 111.1 m
- To
- 115.3 m
- Hole Depth
- 740.9 m
- Intercept Depth
- 111.1 m
Classification
- Deposit Type
- skarn
- Program
- exploration
- Sample Type
- drill
- Group ID
- S1695:111.1-115.3
- Mining Method
- underground
Location
- Easting
- 43553
- Northing
- 64919
- Elevation
- 231 m
- Azimuth
- 315 °
- Dip
- -70 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- SGS and ALS
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Deleterious
- Deleterious Flag
- No
Metal Equivalent
- Assumptions Disclosed
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-10-06T00:00:00.000Z
Reasoning: No copper grade reported as a byproduct indicator alongside tin mineralization.
Evidence · table
“0.00”
Context: 4.2
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
S1693Ringrose Prospect · tinGrade: 3.09Grade Unit: %Intercept: 2.3 mView all detailsHide details
Identity
- Hole ID
- S1693
- Project
- Ringrose Prospect
- Commodity
- tin
- Region
- australia_tas
- Reported Region
- australia_tas
- Ticker
- MLX
Geometry
- Grade
- 3.09
- Grade Unit
- %
- Intercept
- 2.3 m
- From
- 172.7 m
- To
- 175 m
- Hole Depth
- 282.07 m
- Intercept Depth
- 160 m
Classification
- Deposit Type
- skarn
- Program
- exploration
- Sample Type
- drill
- Group ID
- S1693:172.7-175
- Mining Method
- underground
Location
- Easting
- 43532
- Northing
- 64825
- Elevation
- 247 m
- Azimuth
- 338 °
- Dip
- -78 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- SGS and ALS
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Deleterious
- Deleterious Flag
- No
Metal Equivalent
- Assumptions Disclosed
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-10-06T00:00:00.000Z
Reasoning: This intercept shows an exceptional tin grade over a narrow width, contributing to the understanding of mineralization at Ringrose.
Positive factors
- exceptional_grade
Negative factors
- apparent_width_only
Evidence · table
“3.09”
Context: 2.3
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
S1693Ringrose Prospect · copperGrade: 0Grade Unit: %Intercept: 2.3 mView all detailsHide details
Identity
- Hole ID
- S1693
- Project
- Ringrose Prospect
- Commodity
- copper
- Region
- australia_tas
- Reported Region
- australia_tas
- Ticker
- MLX
Geometry
- Grade
- 0
- Grade Unit
- %
- Intercept
- 2.3 m
- From
- 172.7 m
- To
- 175 m
- Hole Depth
- 282.07 m
- Intercept Depth
- 160 m
Classification
- Deposit Type
- skarn
- Program
- exploration
- Sample Type
- drill
- Group ID
- S1693:172.7-175
- Mining Method
- underground
Location
- Easting
- 43532
- Northing
- 64825
- Elevation
- 247 m
- Azimuth
- 338 °
- Dip
- -78 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- SGS and ALS
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Deleterious
- Deleterious Flag
- No
Metal Equivalent
- Assumptions Disclosed
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-10-06T00:00:00.000Z
Reasoning: No copper grade reported as a byproduct indicator alongside tin mineralization.
Evidence · table
“0.00”
Context: 2.3
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
S1693Ringrose Prospect · tinGrade: 0.68Grade Unit: %Intercept: 8.6 mView all detailsHide details
Identity
- Hole ID
- S1693
- Project
- Ringrose Prospect
- Commodity
- tin
- Region
- australia_tas
- Reported Region
- australia_tas
- Ticker
- MLX
Geometry
- Grade
- 0.68
- Grade Unit
- %
- Intercept
- 8.6 m
- From
- 206.5 m
- To
- 215.1 m
- Hole Depth
- 282.07 m
- Intercept Depth
- 160 m
Classification
- Deposit Type
- skarn
- Program
- exploration
- Sample Type
- drill
- Group ID
- S1693:206.5-215.1
- Mining Method
- underground
Location
- Easting
- 43532
- Northing
- 64825
- Elevation
- 247 m
- Azimuth
- 338 °
- Dip
- -78 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- SGS and ALS
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Deleterious
- Deleterious Flag
- No
Metal Equivalent
- Assumptions Disclosed
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-10-06T00:00:00.000Z
Reasoning: This intercept shows a moderate tin grade over a moderate width, contributing to the understanding of mineralization at Ringrose.
Positive factors
- moderate_grade
- moderate_continuity
Negative factors
- apparent_width_only
Evidence · table
“0.68”
Context: 8.6
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
S1693Ringrose Prospect · copperGrade: 0.1Grade Unit: %Intercept: 8.6 mView all detailsHide details
Identity
- Hole ID
- S1693
- Project
- Ringrose Prospect
- Commodity
- copper
- Region
- australia_tas
- Reported Region
- australia_tas
- Ticker
- MLX
Geometry
- Grade
- 0.1
- Grade Unit
- %
- Intercept
- 8.6 m
- From
- 206.5 m
- To
- 215.1 m
- Hole Depth
- 282.07 m
- Intercept Depth
- 160 m
Classification
- Deposit Type
- skarn
- Program
- exploration
- Sample Type
- drill
- Group ID
- S1693:206.5-215.1
- Mining Method
- underground
Location
- Easting
- 43532
- Northing
- 64825
- Elevation
- 247 m
- Azimuth
- 338 °
- Dip
- -78 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- SGS and ALS
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Deleterious
- Deleterious Flag
- No
Metal Equivalent
- Assumptions Disclosed
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-10-06T00:00:00.000Z
Reasoning: Trace copper grade reported as a byproduct indicator alongside significant tin mineralization.
Evidence · table
“0.10”
Context: 8.6
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
S1710Ringrose Prospect · tinGrade: 2.68Grade Unit: %Intercept: 1 mView all detailsHide details
Identity
- Hole ID
- S1710
- Project
- Ringrose Prospect
- Commodity
- tin
- Region
- australia_tas
- Reported Region
- australia_tas
- Ticker
- MLX
Geometry
- Grade
- 2.68
- Grade Unit
- %
- Intercept
- 1 m
- From
- 59 m
- To
- 60 m
- Hole Depth
- 364.6 m
- Intercept Depth
- 59 m
Classification
- Deposit Type
- skarn
- Program
- exploration
- Sample Type
- drill
- Group ID
- S1710:59-60
- Mining Method
- underground
Location
- Easting
- 43534
- Northing
- 64818
- Elevation
- 247 m
- Azimuth
- 73 °
- Dip
- -53 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- SGS and ALS
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Deleterious
- Deleterious Flag
- No
Metal Equivalent
- Assumptions Disclosed
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-10-06T00:00:00.000Z
Reasoning: This intercept shows an exceptional tin grade over a narrow width, contributing to the understanding of mineralization at Ringrose.
Positive factors
- exceptional_grade
Negative factors
- apparent_width_only
Evidence · table
“2.68”
Context: 1.0
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
S1710Ringrose Prospect · copperGrade: 0.1Grade Unit: %Intercept: 1 mView all detailsHide details
Identity
- Hole ID
- S1710
- Project
- Ringrose Prospect
- Commodity
- copper
- Region
- australia_tas
- Reported Region
- australia_tas
- Ticker
- MLX
Geometry
- Grade
- 0.1
- Grade Unit
- %
- Intercept
- 1 m
- From
- 59 m
- To
- 60 m
- Hole Depth
- 364.6 m
- Intercept Depth
- 59 m
Classification
- Deposit Type
- skarn
- Program
- exploration
- Sample Type
- drill
- Group ID
- S1710:59-60
- Mining Method
- underground
Location
- Easting
- 43534
- Northing
- 64818
- Elevation
- 247 m
- Azimuth
- 73 °
- Dip
- -53 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- SGS and ALS
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Deleterious
- Deleterious Flag
- No
Metal Equivalent
- Assumptions Disclosed
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-10-06T00:00:00.000Z
Reasoning: Trace copper grade reported as a byproduct indicator alongside significant tin mineralization.
Evidence · table
“0.10”
Context: 1.0
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
S1712Ringrose Prospect · tinGrade: 0.87Grade Unit: %Intercept: 3 mView all detailsHide details
Identity
- Hole ID
- S1712
- Project
- Ringrose Prospect
- Commodity
- tin
- Region
- australia_tas
- Reported Region
- australia_tas
- Ticker
- MLX
Geometry
- Grade
- 0.87
- Grade Unit
- %
- Intercept
- 3 m
- From
- 139 m
- To
- 142 m
- Hole Depth
- 467 m
- Intercept Depth
- 164 m
Classification
- Deposit Type
- skarn
- Program
- exploration
- Sample Type
- drill
- Group ID
- S1712:139-142
- Mining Method
- underground
Location
- Easting
- 43536
- Northing
- 64823
- Elevation
- 247 m
- Azimuth
- 27 °
- Dip
- -57 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- SGS and ALS
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Deleterious
- Deleterious Flag
- No
Metal Equivalent
- Assumptions Disclosed
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-10-06T00:00:00.000Z
Reasoning: This intercept shows a moderate tin grade over a narrow width, contributing to the understanding of mineralization at Ringrose.
Positive factors
- moderate_grade
Negative factors
- apparent_width_only
Evidence · table
“0.87”
Context: 3.0
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
S1712Ringrose Prospect · copperGrade: 0Grade Unit: %Intercept: 3 mView all detailsHide details
Identity
- Hole ID
- S1712
- Project
- Ringrose Prospect
- Commodity
- copper
- Region
- australia_tas
- Reported Region
- australia_tas
- Ticker
- MLX
Geometry
- Grade
- 0
- Grade Unit
- %
- Intercept
- 3 m
- From
- 139 m
- To
- 142 m
- Hole Depth
- 467 m
- Intercept Depth
- 164 m
Classification
- Deposit Type
- skarn
- Program
- exploration
- Sample Type
- drill
- Group ID
- S1712:139-142
- Mining Method
- underground
Location
- Easting
- 43536
- Northing
- 64823
- Elevation
- 247 m
- Azimuth
- 27 °
- Dip
- -57 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- SGS and ALS
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Deleterious
- Deleterious Flag
- No
Metal Equivalent
- Assumptions Disclosed
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-10-06T00:00:00.000Z
Reasoning: No copper grade reported as a byproduct indicator alongside tin mineralization.
Evidence · table
“0.00”
Context: 3.0
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
S1712Ringrose Prospect · tinGrade: 1.93Grade Unit: %Intercept: 1.3 mView all detailsHide details
Identity
- Hole ID
- S1712
- Project
- Ringrose Prospect
- Commodity
- tin
- Region
- australia_tas
- Reported Region
- australia_tas
- Ticker
- MLX
Geometry
- Grade
- 1.93
- Grade Unit
- %
- Intercept
- 1.3 m
- From
- 47 m
- To
- 48.3 m
- Hole Depth
- 467 m
- Intercept Depth
- 47 m
Classification
- Deposit Type
- skarn
- Program
- exploration
- Sample Type
- drill
- Group ID
- S1712:47-48.3
- Mining Method
- underground
Location
- Easting
- 43536
- Northing
- 64823
- Elevation
- 247 m
- Azimuth
- 27 °
- Dip
- -57 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- SGS and ALS
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Deleterious
- Deleterious Flag
- No
Metal Equivalent
- Assumptions Disclosed
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-10-06T00:00:00.000Z
Reasoning: This intercept shows a strong tin grade over a narrow width, contributing to the understanding of mineralization at Ringrose.
Positive factors
- strong_grade
Negative factors
- apparent_width_only
Evidence · table
“1.93”
Context: 1.3
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
S1712Ringrose Prospect · copperGrade: 0.1Grade Unit: %Intercept: 1.3 mView all detailsHide details
Identity
- Hole ID
- S1712
- Project
- Ringrose Prospect
- Commodity
- copper
- Region
- australia_tas
- Reported Region
- australia_tas
- Ticker
- MLX
Geometry
- Grade
- 0.1
- Grade Unit
- %
- Intercept
- 1.3 m
- From
- 47 m
- To
- 48.3 m
- Hole Depth
- 467 m
- Intercept Depth
- 47 m
Classification
- Deposit Type
- skarn
- Program
- exploration
- Sample Type
- drill
- Group ID
- S1712:47-48.3
- Mining Method
- underground
Location
- Easting
- 43536
- Northing
- 64823
- Elevation
- 247 m
- Azimuth
- 27 °
- Dip
- -57 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- SGS and ALS
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Deleterious
- Deleterious Flag
- No
Metal Equivalent
- Assumptions Disclosed
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-10-06T00:00:00.000Z
Reasoning: Trace copper grade reported as a byproduct indicator alongside significant tin mineralization.
Evidence · table
“0.10”
Context: 1.3
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
S1691Ringrose Prospect · tinGrade: 0.73Grade Unit: %Intercept: 3 mView all detailsHide details
Identity
- Hole ID
- S1691
- Project
- Ringrose Prospect
- Commodity
- tin
- Region
- australia_tas
- Reported Region
- australia_tas
- Ticker
- MLX
Geometry
- Grade
- 0.73
- Grade Unit
- %
- Intercept
- 3 m
- From
- 137 m
- To
- 140 m
- Hole Depth
- 257.9 m
- Intercept Depth
- 137 m
Classification
- Deposit Type
- skarn
- Program
- exploration
- Sample Type
- drill
- Group ID
- S1691:137-140
- Mining Method
- underground
Location
- Easting
- 43531
- Northing
- 64824
- Elevation
- 248 m
- Azimuth
- 303 °
- Dip
- -76 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- SGS and ALS
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Deleterious
- Deleterious Flag
- No
Metal Equivalent
- Assumptions Disclosed
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-10-06T00:00:00.000Z
Reasoning: This intercept shows a moderate tin grade over a narrow width, contributing to the understanding of mineralization at Ringrose.
Positive factors
- moderate_grade
Negative factors
- apparent_width_only
Evidence · table
“0.73”
Context: 3.0
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
S1691Ringrose Prospect · copperGrade: 0Grade Unit: %Intercept: 3 mView all detailsHide details
Identity
- Hole ID
- S1691
- Project
- Ringrose Prospect
- Commodity
- copper
- Region
- australia_tas
- Reported Region
- australia_tas
- Ticker
- MLX
Geometry
- Grade
- 0
- Grade Unit
- %
- Intercept
- 3 m
- From
- 137 m
- To
- 140 m
- Hole Depth
- 257.9 m
- Intercept Depth
- 137 m
Classification
- Deposit Type
- skarn
- Program
- exploration
- Sample Type
- drill
- Group ID
- S1691:137-140
- Mining Method
- underground
Location
- Easting
- 43531
- Northing
- 64824
- Elevation
- 248 m
- Azimuth
- 303 °
- Dip
- -76 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- SGS and ALS
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Deleterious
- Deleterious Flag
- No
Metal Equivalent
- Assumptions Disclosed
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-10-06T00:00:00.000Z
Reasoning: No copper grade reported as a byproduct indicator alongside tin mineralization.
Evidence · table
“0.00”
Context: 3.0
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
S1709Ringrose Prospect · tinGrade: 1.08Grade Unit: %Intercept: 1.9 mView all detailsHide details
Identity
- Hole ID
- S1709
- Project
- Ringrose Prospect
- Commodity
- tin
- Region
- australia_tas
- Reported Region
- australia_tas
- Ticker
- MLX
Geometry
- Grade
- 1.08
- Grade Unit
- %
- Intercept
- 1.9 m
- From
- 320.6 m
- To
- 322.5 m
- Hole Depth
- 363.65 m
- Intercept Depth
- 277.5 m
Classification
- Deposit Type
- skarn
- Program
- exploration
- Sample Type
- drill
- Group ID
- S1709:320.6-322.5
- Mining Method
- underground
Location
- Easting
- 43286
- Northing
- 64966
- Elevation
- 285 m
- Azimuth
- 110 °
- Dip
- -57 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- SGS and ALS
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Deleterious
- Deleterious Flag
- No
Metal Equivalent
- Assumptions Disclosed
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-10-06T00:00:00.000Z
Reasoning: This intercept shows a strong tin grade over a narrow width, contributing to the understanding of mineralization at Ringrose.
Positive factors
- strong_grade
Negative factors
- apparent_width_only
Evidence · table
“1.08”
Context: 1.9
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
S1709Ringrose Prospect · copperGrade: 0Grade Unit: %Intercept: 1.9 mView all detailsHide details
Identity
- Hole ID
- S1709
- Project
- Ringrose Prospect
- Commodity
- copper
- Region
- australia_tas
- Reported Region
- australia_tas
- Ticker
- MLX
Geometry
- Grade
- 0
- Grade Unit
- %
- Intercept
- 1.9 m
- From
- 320.6 m
- To
- 322.5 m
- Hole Depth
- 363.65 m
- Intercept Depth
- 277.5 m
Classification
- Deposit Type
- skarn
- Program
- exploration
- Sample Type
- drill
- Group ID
- S1709:320.6-322.5
- Mining Method
- underground
Location
- Easting
- 43286
- Northing
- 64966
- Elevation
- 285 m
- Azimuth
- 110 °
- Dip
- -57 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- SGS and ALS
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Deleterious
- Deleterious Flag
- No
Metal Equivalent
- Assumptions Disclosed
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-10-06T00:00:00.000Z
Reasoning: No copper grade reported as a byproduct indicator alongside tin mineralization.
Evidence · table
“0.00”
Context: 1.9
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
How Atlas produces this analysis
Minestarters Atlas uses automated extraction to summarize mining announcements, identify reported measurements, and classify supporting evidence. Sentiment reflects the extracted narrative and classification rules; it is an interpretation, not a reported measurement. Evidence quotes and context are provided where available. Missing data, low-confidence results, and review flags indicate limitations. Check the original publisher announcement before relying on an interpretation.