Legacy Gold Intersects 1.14 g/t Gold over 44.3ft (13.5m) from Surface, and Then 2.4 g/t over 26.9ft (8.2m), Incl. 6.6 g/t over 7.5ft (2.3m); Main Zone Extended 558ft (170m) West at Baner, Idaho
Original announcement by tmx on
- Company
- Legacy Gold Mines Ltd.
- Ticker
- LEGY
- Exchange
- TSX
- Region
- Idaho
- Primary commodity
- Gold
- Secondary commodities
- None reported
- Document categories
- Drill results
- Extracted
- 2026-08-25 18:25:36 UTC
Analysis by Minestarters Atlas
Minestarters Atlas analysis
Summary
Legacy Gold announced significant assay results from drill hole LG26-004 at its Baner Gold Mine in Idaho, intersecting 1.14 g/t gold over 13.5m from surface and 2.4 g/t gold over 8.2m, including 6.6 g/t gold over 2.3m. These results extend the Main Zone mineralization 170m to the west and reinforce the potential for extensive near-surface, open-pit amenable gold mineralization. The company's 2026 drill program continues to target both Main and Northeast Zones, as well as new exploration targets.
Reasoning: Legacy Gold reported strong drill results from LG26-004 at its Baner Gold Mine, featuring high-grade and wide intercepts, including near-surface mineralization, which significantly extends the Main Zone. The results validate the geological model for an open-pit, heap-leach development, supported by robust QA/QC, though true widths remain unconfirmed and the hole was curtailed.
Positive factors
- High-grade gold intercepts, including 10.5 g/t Au over 0.5m and 6.6 g/t Au over 2.3m, are significant for an open-pit target.
- Multiple wide intercepts, including 13.5m at 1.14 g/t Au from surface and 8.2m at 2.4 g/t Au, indicate bulk tonnage potential.
- Drilling extended the Main Zone mineralization 170m (558ft) west, demonstrating continuity and growth potential.
- Near-surface mineralization with low waste between intervals supports a low strip ratio for potential open-pit development.
- Comprehensive QA/QC procedures, including certified labs and QP sign-off, enhance confidence in the results.
Negative factors
- True widths are unknown, which introduces uncertainty regarding the actual dimensions of the mineralization.
- Hole LG26-004 was curtailed before reaching the full extent of the planned target area, leaving the strongest gold-in-soil values untested.
Facts used in scoring: 22
Classification and evidence
Bonanza Interceptpositive
Exceptionally high-grade zone, well above the deposit-type norm.
Why it applies: The intercept of 10.5 g/t Au over 0.5m is exceptionally high-grade for an open-pit gold target, well above the typical threshold.
Evidence · table
“10.5”
Context: 0.5
Bonanza Interceptpositive
Exceptionally high-grade zone, well above the deposit-type norm.
Why it applies: The intercept of 6.6 g/t Au over 2.3m is exceptionally high-grade for an open-pit gold target, well above the typical threshold.
Evidence · table
“6.6”
Context: 2.3
Step-Out Extensionpositive
Mineralization extended beyond the previously known limit.
Why it applies: LG26-004 extends Main Zone mineralization 170m (558ft) west of the nearest prior drill intersection, indicating a significant extension of the known deposit.
Evidence · text
“LG26-004 also reinforces what we continue to see across Baner-gold mineralization extending across the hillsides almost everywhere we have drilled, including at or near surface, with higher grades continuing to show up throughout." LG26-004 combines mineralization beginning at surface, multiple substantial-width intersections and several higher-grade assays, while extending Main Zone mineralization 170m (558ft) west of the nearest prior drill intersection and 200m (656ft) uphill from the nearest 2025 drilling.”
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: The release details QA/QC procedures including regular insertion of blanks and standards, duplicates, and mentions certified laboratories (Skyline Assayers & Laboratories, Paragon Geochemical lab) and QP sign-off.
Evidence · text
“The Company's QA/QC program includes the regular insertion of blanks and standards into the sample shipments. Duplicates were prepared on-site (Scout) with a riffle splitter. Standards, blanks and duplicates are inserted at approximately one per 15 samples.”
QP/CP Signedpositive · Story-specific tag
Qualified Person (QP) or Competent Person (CP) named and signed off — a member of a recognized professional association (e.g., AusIMM, SME, AIG, P.Geo) with relevant experience.
Why it applies: Mr. Mike Sutton, P.Geo., Director and VP of Exploration of the Company, is the Qualified Person, as defined under National Instrument 43-101, who reviewed and approved scientific and technical disclosure.
Evidence · text
“Mr. Mike Sutton, P.Geo., Director and VP of Exploration of the Company, is the Qualified Person, as defined under National Instrument 43-101 - Standards of Disclosure for Mineral Projects , who reviewed and approved scientific and technical disclosure in this press release.”
Compositing Transparentpositive
Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Why it applies: The document clearly states that composite intersections are calculated using a 0.2 g/t cutoff for gold with 10m internal dilution.
Evidence · text
“Composite intersections are calculated using a 0.2 g/t cutoff for gold with 10m internal dilution.”
Apparent Width Onlynegative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Why it applies: The document explicitly states that true widths are unknown until zone dips are proven.
Evidence · text
“True widths are unknown until zone dips are proven.”
Extracted facts
Stored fact records: 22. Some facts used in scoring do not have a stored record.
Drill Results (22)
LG26-004Baner Gold Mine Property · goldGrade: 1.14Grade Unit: g/tIntercept: 13.5 mView all detailsHide details
Identity
- Hole ID
- LG26-004
- Project
- Baner Gold Mine Property
- Commodity
- gold
- Region
- usa_id
- Reported Region
- Idaho
- Ticker
- LEGY
Geometry
- Grade
- 1.14
- Grade Unit
- g/t
- Intercept
- 13.5 m
- From
- 0 m
- To
- 13.5 m
- Hole Depth
- 214.6 m
Classification
- Mining Method
- open_pit
Location
- Easting
- 615215
- Northing
- 5069620
- Azimuth
- 224 °
- Dip
- -45 °
- Loc. Confidence
- high
QA/QC
- Laboratory
- Paragon Geochemical lab
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- blanks, standards, duplicates
Compositing
- Cutoff Grade
- 0.2
- Cutoff Unit
- g/t
- Dilution Disclosed
- Yes
- Max Dilution
- 10 m
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-08-11T00:00:00.000Z
Reasoning: This intercept represents a significant near-surface gold zone, which is highly favorable for open-pit mining, contributing positively to the project's potential.
Positive factors
- Significant intercept length of 13.5m at a good grade of 1.14 g/t Au for an open-pit target.
- Intercept starts from surface, indicating potential for low strip ratio.
Negative factors
- True width is unknown.
Evidence · table
“1.14”
Context: 13.5
LG26-004Baner Gold Mine Property · goldGrade: 3.45Grade Unit: g/tIntercept: 1.5 mView all detailsHide details
Identity
- Hole ID
- LG26-004
- Project
- Baner Gold Mine Property
- Commodity
- gold
- Region
- usa_id
- Reported Region
- Idaho
- Ticker
- LEGY
Geometry
- Grade
- 3.45
- Grade Unit
- g/t
- Intercept
- 1.5 m
- From
- 11.97 m
- To
- 13.5 m
- Hole Depth
- 214.6 m
Classification
- Mining Method
- open_pit
Location
- Easting
- 615215
- Northing
- 5069620
- Azimuth
- 224 °
- Dip
- -45 °
- Loc. Confidence
- high
QA/QC
- Laboratory
- Paragon Geochemical lab
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- blanks, standards, duplicates
Compositing
- Cutoff Grade
- 0.2
- Cutoff Unit
- g/t
- Dilution Disclosed
- Yes
- Max Dilution
- 10 m
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-08-11T00:00:00.000Z
Reasoning: This high-grade sub-interval significantly boosts the overall quality of the near-surface mineralization, enhancing the project's economic potential.
Positive factors
- High-grade sub-interval of 3.45 g/t Au over 1.5m, indicating a richer zone within the broader intercept.
Negative factors
- True width is unknown.
Evidence · table
“3.45”
Context: 1.5
LG26-004Baner Gold Mine Property · goldGrade: 0.27Grade Unit: g/tIntercept: 21.2 mView all detailsHide details
Identity
- Hole ID
- LG26-004
- Project
- Baner Gold Mine Property
- Commodity
- gold
- Region
- usa_id
- Reported Region
- Idaho
- Ticker
- LEGY
Geometry
- Grade
- 0.27
- Grade Unit
- g/t
- Intercept
- 21.2 m
- From
- 25.8 m
- To
- 47 m
- Hole Depth
- 214.6 m
Classification
- Mining Method
- open_pit
Location
- Easting
- 615215
- Northing
- 5069620
- Azimuth
- 224 °
- Dip
- -45 °
- Loc. Confidence
- high
QA/QC
- Laboratory
- Paragon Geochemical lab
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- blanks, standards, duplicates
Compositing
- Cutoff Grade
- 0.2
- Cutoff Unit
- g/t
- Dilution Disclosed
- Yes
- Max Dilution
- 10 m
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-08-11T00:00:00.000Z
Reasoning: While wide, the lower grade of this intercept makes it less impactful than higher-grade zones, though it still contributes to the overall mineralized footprint.
Positive factors
- Wide intercept of 21.2m, contributing to bulk tonnage potential.
Negative factors
- Lower grade of 0.27 g/t Au, which is at the lower end for open-pit targets.
- True width is unknown.
Evidence · table
“0.27”
Context: 21.2
LG26-004Baner Gold Mine Property · goldGrade: 1.32Grade Unit: g/tIntercept: 0.8 mView all detailsHide details
Identity
- Hole ID
- LG26-004
- Project
- Baner Gold Mine Property
- Commodity
- gold
- Region
- usa_id
- Reported Region
- Idaho
- Ticker
- LEGY
Geometry
- Grade
- 1.32
- Grade Unit
- g/t
- Intercept
- 0.8 m
- From
- 25.8 m
- To
- 26.6 m
- Hole Depth
- 214.6 m
Classification
- Mining Method
- open_pit
Location
- Easting
- 615215
- Northing
- 5069620
- Azimuth
- 224 °
- Dip
- -45 °
- Loc. Confidence
- high
QA/QC
- Laboratory
- Paragon Geochemical lab
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- blanks, standards, duplicates
Compositing
- Cutoff Grade
- 0.2
- Cutoff Unit
- g/t
- Dilution Disclosed
- Yes
- Max Dilution
- 10 m
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-08-11T00:00:00.000Z
Reasoning: While the grade is good, the very narrow width limits its individual materiality, but it indicates localized higher-grade mineralization.
Positive factors
- Higher-grade sub-interval within a broader low-grade zone.
Negative factors
- Very narrow intercept length of 0.8m.
- True width is unknown.
Evidence · table
“1.32”
Context: 0.8
LG26-004Baner Gold Mine Property · goldGrade: 0.74Grade Unit: g/tIntercept: 0.6 mView all detailsHide details
Identity
- Hole ID
- LG26-004
- Project
- Baner Gold Mine Property
- Commodity
- gold
- Region
- usa_id
- Reported Region
- Idaho
- Ticker
- LEGY
Geometry
- Grade
- 0.74
- Grade Unit
- g/t
- Intercept
- 0.6 m
- From
- 46.4 m
- To
- 47 m
- Hole Depth
- 214.6 m
Classification
- Mining Method
- open_pit
Location
- Easting
- 615215
- Northing
- 5069620
- Azimuth
- 224 °
- Dip
- -45 °
- Loc. Confidence
- high
QA/QC
- Laboratory
- Paragon Geochemical lab
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- blanks, standards, duplicates
Compositing
- Cutoff Grade
- 0.2
- Cutoff Unit
- g/t
- Dilution Disclosed
- Yes
- Max Dilution
- 10 m
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-08-11T00:00:00.000Z
Reasoning: This narrow, moderate-grade intercept has limited individual impact but contributes to the overall mineralized envelope.
Negative factors
- Very narrow intercept length of 0.6m.
- Grade is moderate for an open-pit target.
- True width is unknown.
Evidence · table
“0.74”
Context: 0.6
LG26-004Baner Gold Mine Property · goldGrade: 0.24Grade Unit: g/tIntercept: 1 mView all detailsHide details
Identity
- Hole ID
- LG26-004
- Project
- Baner Gold Mine Property
- Commodity
- gold
- Region
- usa_id
- Reported Region
- Idaho
- Ticker
- LEGY
Geometry
- Grade
- 0.24
- Grade Unit
- g/t
- Intercept
- 1 m
- From
- 57.55 m
- To
- 58.55 m
- Hole Depth
- 214.6 m
Classification
- Mining Method
- open_pit
Location
- Easting
- 615215
- Northing
- 5069620
- Azimuth
- 224 °
- Dip
- -45 °
- Loc. Confidence
- high
QA/QC
- Laboratory
- Paragon Geochemical lab
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- blanks, standards, duplicates
Compositing
- Cutoff Grade
- 0.2
- Cutoff Unit
- g/t
- Dilution Disclosed
- Yes
- Max Dilution
- 10 m
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-08-11T00:00:00.000Z
Reasoning: This intercept is marginal, being near the cut-off grade and narrow, contributing minimally to overall project value.
Negative factors
- Low grade of 0.24 g/t Au, near the cut-off.
- Narrow intercept length of 1.0m.
- True width is unknown.
Evidence · table
“0.24”
Context: 1.0
LG26-004Baner Gold Mine Property · goldGrade: 0.17Grade Unit: g/tIntercept: 1.2 mView all detailsHide details
Identity
- Hole ID
- LG26-004
- Project
- Baner Gold Mine Property
- Commodity
- gold
- Region
- usa_id
- Reported Region
- Idaho
- Ticker
- LEGY
Geometry
- Grade
- 0.17
- Grade Unit
- g/t
- Intercept
- 1.2 m
- From
- 65.9 m
- To
- 67.1 m
- Hole Depth
- 214.6 m
Classification
- Mining Method
- open_pit
Location
- Easting
- 615215
- Northing
- 5069620
- Azimuth
- 224 °
- Dip
- -45 °
- Loc. Confidence
- high
QA/QC
- Laboratory
- Paragon Geochemical lab
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- blanks, standards, duplicates
Compositing
- Cutoff Grade
- 0.2
- Cutoff Unit
- g/t
- Dilution Disclosed
- Yes
- Max Dilution
- 10 m
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-08-11T00:00:00.000Z
Reasoning: This intercept is below the economic cut-off grade and narrow, indicating it is not a significant mineralized zone.
Negative factors
- Grade of 0.17 g/t Au is below the stated 0.2 g/t cut-off, making it sub-economic.
- Narrow intercept length of 1.2m.
- True width is unknown.
Evidence · table
“0.17”
Context: 1.2
LG26-004Baner Gold Mine Property · goldGrade: 2.4Grade Unit: g/tIntercept: 8.2 mView all detailsHide details
Identity
- Hole ID
- LG26-004
- Project
- Baner Gold Mine Property
- Commodity
- gold
- Region
- usa_id
- Reported Region
- Idaho
- Ticker
- LEGY
Geometry
- Grade
- 2.4
- Grade Unit
- g/t
- Intercept
- 8.2 m
- From
- 74.5 m
- To
- 82.7 m
- Hole Depth
- 214.6 m
Classification
- Mining Method
- open_pit
Location
- Easting
- 615215
- Northing
- 5069620
- Azimuth
- 224 °
- Dip
- -45 °
- Loc. Confidence
- high
QA/QC
- Laboratory
- Paragon Geochemical lab
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- blanks, standards, duplicates
Compositing
- Cutoff Grade
- 0.2
- Cutoff Unit
- g/t
- Dilution Disclosed
- Yes
- Max Dilution
- 10 m
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-08-11T00:00:00.000Z
Reasoning: This is a high-quality intercept with both good grade and width, significantly contributing to the project's economic viability and extending known mineralization.
Positive factors
- Strong grade of 2.4 g/t Au over a good width of 8.2m, highly favorable for open-pit mining.
- This intercept is highlighted in the press release as a key result.
Negative factors
- True width is unknown.
Evidence · table
“2.4”
Context: 8.2
LG26-004Baner Gold Mine Property · goldGrade: 6.6Grade Unit: g/tIntercept: 2.3 mView all detailsHide details
Identity
- Hole ID
- LG26-004
- Project
- Baner Gold Mine Property
- Commodity
- gold
- Region
- usa_id
- Reported Region
- Idaho
- Ticker
- LEGY
Geometry
- Grade
- 6.6
- Grade Unit
- g/t
- Intercept
- 2.3 m
- From
- 76.7 m
- To
- 79 m
- Hole Depth
- 214.6 m
Classification
- Mining Method
- open_pit
Location
- Easting
- 615215
- Northing
- 5069620
- Azimuth
- 224 °
- Dip
- -45 °
- Loc. Confidence
- high
QA/QC
- Laboratory
- Paragon Geochemical lab
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- blanks, standards, duplicates
Compositing
- Cutoff Grade
- 0.2
- Cutoff Unit
- g/t
- Dilution Disclosed
- Yes
- Max Dilution
- 10 m
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-08-11T00:00:00.000Z
Reasoning: This bonanza-grade intercept is a highly positive result, significantly enhancing the overall grade profile and economic potential of the project.
Positive factors
- Exceptional high-grade sub-interval of 6.6 g/t Au over 2.3m, indicating a bonanza zone within the broader intercept.
- This is a key highlight in the press release.
Negative factors
- True width is unknown.
Evidence · table
“6.6”
Context: 2.3
LG26-004Baner Gold Mine Property · goldGrade: 0.29Grade Unit: g/tIntercept: 16.8 mView all detailsHide details
Identity
- Hole ID
- LG26-004
- Project
- Baner Gold Mine Property
- Commodity
- gold
- Region
- usa_id
- Reported Region
- Idaho
- Ticker
- LEGY
Geometry
- Grade
- 0.29
- Grade Unit
- g/t
- Intercept
- 16.8 m
- From
- 86.8 m
- To
- 103.6 m
- Hole Depth
- 214.6 m
Classification
- Mining Method
- open_pit
Location
- Easting
- 615215
- Northing
- 5069620
- Azimuth
- 224 °
- Dip
- -45 °
- Loc. Confidence
- high
QA/QC
- Laboratory
- Paragon Geochemical lab
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- blanks, standards, duplicates
Compositing
- Cutoff Grade
- 0.2
- Cutoff Unit
- g/t
- Dilution Disclosed
- Yes
- Max Dilution
- 10 m
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-08-11T00:00:00.000Z
Reasoning: This wide, moderate-grade intercept adds to the overall mineralized volume, supporting the bulk tonnage potential of the project.
Positive factors
- Wide intercept of 16.8m, contributing to bulk tonnage potential.
Negative factors
- Lower grade of 0.29 g/t Au, at the lower end for open-pit targets.
- True width is unknown.
Evidence · table
“0.29”
Context: 16.8
LG26-004Baner Gold Mine Property · goldGrade: 1.1Grade Unit: g/tIntercept: 1 mView all detailsHide details
Identity
- Hole ID
- LG26-004
- Project
- Baner Gold Mine Property
- Commodity
- gold
- Region
- usa_id
- Reported Region
- Idaho
- Ticker
- LEGY
Geometry
- Grade
- 1.1
- Grade Unit
- g/t
- Intercept
- 1 m
- From
- 88.1 m
- To
- 89.1 m
- Hole Depth
- 214.6 m
Classification
- Mining Method
- open_pit
Location
- Easting
- 615215
- Northing
- 5069620
- Azimuth
- 224 °
- Dip
- -45 °
- Loc. Confidence
- high
QA/QC
- Laboratory
- Paragon Geochemical lab
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- blanks, standards, duplicates
Compositing
- Cutoff Grade
- 0.2
- Cutoff Unit
- g/t
- Dilution Disclosed
- Yes
- Max Dilution
- 10 m
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-08-11T00:00:00.000Z
Reasoning: This narrow, but good-grade intercept indicates localized higher-grade mineralization within the wider zone.
Positive factors
- Good grade of 1.1 g/t Au within a broader zone.
Negative factors
- Narrow intercept length of 1.0m.
- True width is unknown.
Evidence · table
“1.1”
Context: 1.0
LG26-004Baner Gold Mine Property · goldGrade: 1.4Grade Unit: g/tIntercept: 1.3 mView all detailsHide details
Identity
- Hole ID
- LG26-004
- Project
- Baner Gold Mine Property
- Commodity
- gold
- Region
- usa_id
- Reported Region
- Idaho
- Ticker
- LEGY
Geometry
- Grade
- 1.4
- Grade Unit
- g/t
- Intercept
- 1.3 m
- From
- 97.8 m
- To
- 99.1 m
- Hole Depth
- 214.6 m
Classification
- Mining Method
- open_pit
Location
- Easting
- 615215
- Northing
- 5069620
- Azimuth
- 224 °
- Dip
- -45 °
- Loc. Confidence
- high
QA/QC
- Laboratory
- Paragon Geochemical lab
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- blanks, standards, duplicates
Compositing
- Cutoff Grade
- 0.2
- Cutoff Unit
- g/t
- Dilution Disclosed
- Yes
- Max Dilution
- 10 m
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-08-11T00:00:00.000Z
Reasoning: This narrow, good-grade intercept further indicates the presence of higher-grade zones within the broader mineralization.
Positive factors
- Good grade of 1.4 g/t Au over a narrow but significant interval.
Negative factors
- Narrow intercept length of 1.3m.
- True width is unknown.
Evidence · table
“1.4”
Context: 1.3
LG26-004Baner Gold Mine Property · goldGrade: 0.8Grade Unit: g/tIntercept: 1.1 mView all detailsHide details
Identity
- Hole ID
- LG26-004
- Project
- Baner Gold Mine Property
- Commodity
- gold
- Region
- usa_id
- Reported Region
- Idaho
- Ticker
- LEGY
Geometry
- Grade
- 0.8
- Grade Unit
- g/t
- Intercept
- 1.1 m
- From
- 102.5 m
- To
- 103.6 m
- Hole Depth
- 214.6 m
Classification
- Mining Method
- open_pit
Location
- Easting
- 615215
- Northing
- 5069620
- Azimuth
- 224 °
- Dip
- -45 °
- Loc. Confidence
- high
QA/QC
- Laboratory
- Paragon Geochemical lab
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- blanks, standards, duplicates
Compositing
- Cutoff Grade
- 0.2
- Cutoff Unit
- g/t
- Dilution Disclosed
- Yes
- Max Dilution
- 10 m
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-08-11T00:00:00.000Z
Reasoning: This narrow, moderate-grade intercept adds to the continuity of mineralization within the broader zone.
Positive factors
- Moderate grade of 0.8 g/t Au, contributing to the overall mineralized zone.
Negative factors
- Narrow intercept length of 1.1m.
- True width is unknown.
Evidence · table
“0.8”
Context: 1.1
LG26-004Baner Gold Mine Property · goldGrade: 0.63Grade Unit: g/tIntercept: 20.1 mView all detailsHide details
Identity
- Hole ID
- LG26-004
- Project
- Baner Gold Mine Property
- Commodity
- gold
- Region
- usa_id
- Reported Region
- Idaho
- Ticker
- LEGY
Geometry
- Grade
- 0.63
- Grade Unit
- g/t
- Intercept
- 20.1 m
- From
- 114 m
- To
- 134.1 m
- Hole Depth
- 214.6 m
Classification
- Mining Method
- open_pit
Location
- Easting
- 615215
- Northing
- 5069620
- Azimuth
- 224 °
- Dip
- -45 °
- Loc. Confidence
- high
QA/QC
- Laboratory
- Paragon Geochemical lab
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- blanks, standards, duplicates
Compositing
- Cutoff Grade
- 0.2
- Cutoff Unit
- g/t
- Dilution Disclosed
- Yes
- Max Dilution
- 10 m
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-08-11T00:00:00.000Z
Reasoning: This wide, moderate-grade intercept is a positive indicator for bulk tonnage potential, contributing significantly to the overall mineralized footprint.
Positive factors
- Very wide intercept of 20.1m at a good grade for an open-pit target, indicating significant bulk tonnage potential.
Negative factors
- True width is unknown.
Evidence · table
“0.63”
Context: 20.1
LG26-004Baner Gold Mine Property · goldGrade: 0.81Grade Unit: g/tIntercept: 14.5 mView all detailsHide details
Identity
- Hole ID
- LG26-004
- Project
- Baner Gold Mine Property
- Commodity
- gold
- Region
- usa_id
- Reported Region
- Idaho
- Ticker
- LEGY
Geometry
- Grade
- 0.81
- Grade Unit
- g/t
- Intercept
- 14.5 m
- From
- 119.65 m
- To
- 134.1 m
- Hole Depth
- 214.6 m
Classification
- Mining Method
- open_pit
Location
- Easting
- 615215
- Northing
- 5069620
- Azimuth
- 224 °
- Dip
- -45 °
- Loc. Confidence
- high
QA/QC
- Laboratory
- Paragon Geochemical lab
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- blanks, standards, duplicates
Compositing
- Cutoff Grade
- 0.2
- Cutoff Unit
- g/t
- Dilution Disclosed
- Yes
- Max Dilution
- 10 m
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-08-11T00:00:00.000Z
Reasoning: This wide, good-grade sub-interval within a larger zone further strengthens the case for significant gold mineralization amenable to open-pit mining.
Positive factors
- Wide sub-interval of 14.5m at a good grade of 0.81 g/t Au, enhancing the overall bulk tonnage potential.
Negative factors
- True width is unknown.
Evidence · table
“0.81”
Context: 14.5
LG26-004Baner Gold Mine Property · goldGrade: 1.75Grade Unit: g/tIntercept: 1.1 mView all detailsHide details
Identity
- Hole ID
- LG26-004
- Project
- Baner Gold Mine Property
- Commodity
- gold
- Region
- usa_id
- Reported Region
- Idaho
- Ticker
- LEGY
Geometry
- Grade
- 1.75
- Grade Unit
- g/t
- Intercept
- 1.1 m
- From
- 122.05 m
- To
- 123.14 m
- Hole Depth
- 214.6 m
Classification
- Mining Method
- open_pit
Location
- Easting
- 615215
- Northing
- 5069620
- Azimuth
- 224 °
- Dip
- -45 °
- Loc. Confidence
- high
QA/QC
- Laboratory
- Paragon Geochemical lab
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- blanks, standards, duplicates
Compositing
- Cutoff Grade
- 0.2
- Cutoff Unit
- g/t
- Dilution Disclosed
- Yes
- Max Dilution
- 10 m
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-08-11T00:00:00.000Z
Reasoning: This narrow, high-grade sub-interval contributes positively by demonstrating the presence of richer mineralization within the broader gold zone.
Positive factors
- Strong grade of 1.75 g/t Au, indicating a higher-grade component within the wider zone.
Negative factors
- Narrow intercept length of 1.1m.
- True width is unknown.
Evidence · table
“1.75”
Context: 1.1
LG26-004Baner Gold Mine Property · goldGrade: 10.5Grade Unit: g/tIntercept: 0.5 mView all detailsHide details
Identity
- Hole ID
- LG26-004
- Project
- Baner Gold Mine Property
- Commodity
- gold
- Region
- usa_id
- Reported Region
- Idaho
- Ticker
- LEGY
Geometry
- Grade
- 10.5
- Grade Unit
- g/t
- Intercept
- 0.5 m
- From
- 133.6 m
- To
- 134.1 m
- Hole Depth
- 214.6 m
Classification
- Mining Method
- open_pit
Location
- Easting
- 615215
- Northing
- 5069620
- Azimuth
- 224 °
- Dip
- -45 °
- Loc. Confidence
- high
QA/QC
- Laboratory
- Paragon Geochemical lab
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- blanks, standards, duplicates
Compositing
- Cutoff Grade
- 0.2
- Cutoff Unit
- g/t
- Dilution Disclosed
- Yes
- Max Dilution
- 10 m
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-08-11T00:00:00.000Z
Reasoning: Despite its narrow width, this bonanza-grade intercept is a highly positive result, indicating very rich localized mineralization and significantly boosting the overall grade profile.
Positive factors
- Exceptional high-grade sub-interval of 10.5 g/t Au, representing a bonanza grade within the broader intercept.
- This is one of the highest individual assays reported in the hole.
Negative factors
- Very narrow intercept length of 0.5m.
- True width is unknown.
Evidence · table
“10.5”
Context: 0.5
LG26-004Baner Gold Mine Property · goldGrade: 0.21Grade Unit: g/tIntercept: 5.5 mView all detailsHide details
Identity
- Hole ID
- LG26-004
- Project
- Baner Gold Mine Property
- Commodity
- gold
- Region
- usa_id
- Reported Region
- Idaho
- Ticker
- LEGY
Geometry
- Grade
- 0.21
- Grade Unit
- g/t
- Intercept
- 5.5 m
- From
- 146 m
- To
- 151.5 m
- Hole Depth
- 214.6 m
Classification
- Mining Method
- open_pit
Location
- Easting
- 615215
- Northing
- 5069620
- Azimuth
- 224 °
- Dip
- -45 °
- Loc. Confidence
- high
QA/QC
- Laboratory
- Paragon Geochemical lab
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- blanks, standards, duplicates
Compositing
- Cutoff Grade
- 0.2
- Cutoff Unit
- g/t
- Dilution Disclosed
- Yes
- Max Dilution
- 10 m
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-08-11T00:00:00.000Z
Reasoning: This intercept is marginal, with a grade just above the cut-off, contributing to the overall mineralized envelope but not significantly to high-grade potential.
Negative factors
- Low grade of 0.21 g/t Au, barely above the cut-off.
- True width is unknown.
Evidence · table
“0.21”
Context: 5.5
LG26-004Baner Gold Mine Property · goldGrade: 0.49Grade Unit: g/tIntercept: 1.2 mView all detailsHide details
Identity
- Hole ID
- LG26-004
- Project
- Baner Gold Mine Property
- Commodity
- gold
- Region
- usa_id
- Reported Region
- Idaho
- Ticker
- LEGY
Geometry
- Grade
- 0.49
- Grade Unit
- g/t
- Intercept
- 1.2 m
- From
- 162.8 m
- To
- 164 m
- Hole Depth
- 214.6 m
Classification
- Mining Method
- open_pit
Location
- Easting
- 615215
- Northing
- 5069620
- Azimuth
- 224 °
- Dip
- -45 °
- Loc. Confidence
- high
QA/QC
- Laboratory
- Paragon Geochemical lab
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- blanks, standards, duplicates
Compositing
- Cutoff Grade
- 0.2
- Cutoff Unit
- g/t
- Dilution Disclosed
- Yes
- Max Dilution
- 10 m
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-08-11T00:00:00.000Z
Reasoning: This narrow, moderate-grade intercept adds to the overall mineralized footprint but is not a highlight.
Negative factors
- Narrow intercept length of 1.2m.
- Moderate grade for an open-pit target.
- True width is unknown.
Evidence · table
“0.49”
Context: 1.2
LG26-004Baner Gold Mine Property · goldGrade: 0.57Grade Unit: g/tIntercept: 1 mView all detailsHide details
Identity
- Hole ID
- LG26-004
- Project
- Baner Gold Mine Property
- Commodity
- gold
- Region
- usa_id
- Reported Region
- Idaho
- Ticker
- LEGY
Geometry
- Grade
- 0.57
- Grade Unit
- g/t
- Intercept
- 1 m
- From
- 181.35 m
- To
- 182.33 m
- Hole Depth
- 214.6 m
Classification
- Mining Method
- open_pit
Location
- Easting
- 615215
- Northing
- 5069620
- Azimuth
- 224 °
- Dip
- -45 °
- Loc. Confidence
- high
QA/QC
- Laboratory
- Paragon Geochemical lab
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- blanks, standards, duplicates
Compositing
- Cutoff Grade
- 0.2
- Cutoff Unit
- g/t
- Dilution Disclosed
- Yes
- Max Dilution
- 10 m
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-08-11T00:00:00.000Z
Reasoning: This narrow, moderate-grade intercept contributes to the overall mineralized footprint but is not a highlight.
Positive factors
- Moderate grade of 0.57 g/t Au.
Negative factors
- Narrow intercept length of 1.0m.
- True width is unknown.
Evidence · table
“0.57”
Context: 1.0
LG26-004Baner Gold Mine Property · goldGrade: 0.21Grade Unit: g/tIntercept: 2.4 mView all detailsHide details
Identity
- Hole ID
- LG26-004
- Project
- Baner Gold Mine Property
- Commodity
- gold
- Region
- usa_id
- Reported Region
- Idaho
- Ticker
- LEGY
Geometry
- Grade
- 0.21
- Grade Unit
- g/t
- Intercept
- 2.4 m
- From
- 200.5 m
- To
- 202.9 m
- Hole Depth
- 214.6 m
Classification
- Mining Method
- open_pit
Location
- Easting
- 615215
- Northing
- 5069620
- Azimuth
- 224 °
- Dip
- -45 °
- Loc. Confidence
- high
QA/QC
- Laboratory
- Paragon Geochemical lab
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- blanks, standards, duplicates
Compositing
- Cutoff Grade
- 0.2
- Cutoff Unit
- g/t
- Dilution Disclosed
- Yes
- Max Dilution
- 10 m
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-08-11T00:00:00.000Z
Reasoning: This intercept is marginal, with a grade just above the cut-off, contributing to the overall mineralized envelope but not significantly to high-grade potential.
Negative factors
- Low grade of 0.21 g/t Au, barely above the cut-off.
- True width is unknown.
Evidence · table
“0.21”
Context: 2.4
LG26-004Baner Gold Mine Property · goldGrade: 0.56Grade Unit: g/tIntercept: 0.5 mView all detailsHide details
Identity
- Hole ID
- LG26-004
- Project
- Baner Gold Mine Property
- Commodity
- gold
- Region
- usa_id
- Reported Region
- Idaho
- Ticker
- LEGY
Geometry
- Grade
- 0.56
- Grade Unit
- g/t
- Intercept
- 0.5 m
- From
- 200.5 m
- To
- 201 m
- Hole Depth
- 214.6 m
Classification
- Mining Method
- open_pit
Location
- Easting
- 615215
- Northing
- 5069620
- Azimuth
- 224 °
- Dip
- -45 °
- Loc. Confidence
- high
QA/QC
- Laboratory
- Paragon Geochemical lab
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- blanks, standards, duplicates
Compositing
- Cutoff Grade
- 0.2
- Cutoff Unit
- g/t
- Dilution Disclosed
- Yes
- Max Dilution
- 10 m
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-08-11T00:00:00.000Z
Reasoning: This narrow, moderate-grade intercept adds to the overall mineralized footprint but is not a highlight.
Negative factors
- Very narrow intercept length of 0.5m.
- Moderate grade for an open-pit target.
- True width is unknown.
Evidence · table
“0.56”
Context: 0.5
How Atlas produces this analysis
Minestarters Atlas uses automated extraction to summarize mining announcements, identify reported measurements, and classify supporting evidence. Sentiment reflects the extracted narrative and classification rules; it is an interpretation, not a reported measurement. Evidence quotes and context are provided where available. Missing data, low-confidence results, and review flags indicate limitations. Check the original publisher announcement before relying on an interpretation.