LAURION Reports Wide Mineralized Zones and High-Grade Polymetallic Intercepts from LBX25-097 and LBX25-100, Advancing Structural Continuity at Ishkoday
Original announcement by tmx on
- Company
- LAURION Mineral Exploration Inc.
- Ticker
- LME
- Exchange
- TSX
- Region
- Ontario
- Primary commodity
- Gold
- Secondary commodities
- Silver, Zinc, Copper
- Document categories
- Drill results
- Extracted
- 2026-08-21 02:45:00 UTC
Analysis by Minestarters Atlas
Minestarters Atlas analysis
Summary
LAURION Mineral Exploration reports new drill results from two holes at its Ishkōday Project, confirming wide polymetallic mineralized zones and advancing structural continuity within the A-Zone. The infill drilling program intersected several narrow high-grade gold and zinc intervals within broader lower-grade envelopes. The company emphasizes improved geological confidence and understanding of the system, despite true widths remaining unknown.
Reasoning: The drill results confirm structural continuity and polymetallic mineralization within the A-Zone, with some narrow high-grade gold and zinc intercepts within broader lower-grade zones. While QA/QC is robust, the lack of true width information limits full interpretation.
Positive factors
- polymetallic_mineralization
- structural_continuity_advanced
- qaqc_disclosed
- qp_signed
Negative factors
- apparent_width_only
- no_true_width_reported
- grades_not_consistently_high_over_significant_widths
Facts used in scoring: 133
Extracted facts
Stored fact records: 133. Some facts used in scoring do not have a stored record.
Drill Results (133)
LBX25-097Ishkōday Project · goldGrade: 0.025Grade Unit: g/tIntercept: 6.5 mView all detailsHide details
Identity
- Hole ID
- LBX25-097
- Project
- Ishkōday Project
- Commodity
- gold
- Region
- canada_on
- Reported Region
- Ontario
- Ticker
- LME
Geometry
- Grade
- 0.025
- Grade Unit
- g/t
- Intercept
- 6.5 m
- From
- 34.5 m
- To
- 41 m
- Hole Depth
- 237 m
Classification
- Deposit Type
- orogenic
- Program
- resource
- Sample Type
- drill
- Group ID
- LBX25-097:34.5-41.0
- Mining Method
- open_pit
Location
- Easting
- 446537
- Northing
- 5513245
- Elevation
- 323 m
- Azimuth
- 128 °
- Dip
- -46 °
- Loc. Confidence
- high
QA/QC
- Laboratory
- ALS Global Analytical Lab
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates, check_assays
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-03T00:00:00.000Z
Reasoning: This intercept shows a wide zone of very low-grade gold, which is below the weak threshold for open pit orogenic gold. While part of an infill program with good QA/QC, the grade is not material.
Positive factors
- qaqc_disclosed
- qp_signed
Negative factors
- apparent_width_only
- no_true_width_reported
- low_grade
Evidence · table
“0.025”
Context: 6.50
Tags used in scoring
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: The drill holes were designed to support targeted infill drilling and improve geological confidence.
Evidence · text
“Drill holes LBX25-097 and LBX25-100 were designed to support targeted infill drilling”
Rejected tags
Rejected tags — excluded from scoring because their label or evidence could not be verified.
Apparent Width OnlyRejected · negative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Reason: The document explicitly states that 'The true widths of the mineralized zones are not known at this time'.
Evidence · text
“The true widths of the mineralized zones are not known at this time”
QA/QC DisclosedRejected · positive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Reason: The release includes a detailed 'Sampling and QA/QC Protocols' section, mentioning external standards, blanks, duplicates, and a certified lab.
Evidence · text
“LAURION employs an industry standard system of external standards, blanks and duplicates for all of its sampling, in addition to the QA/QC protocol employed by the laboratory.”
LBX25-097Ishkōday Project · goldGrade: 0.037Grade Unit: g/tIntercept: 1 mView all detailsHide details
Identity
- Hole ID
- LBX25-097
- Project
- Ishkōday Project
- Commodity
- gold
- Region
- canada_on
- Reported Region
- Ontario
- Ticker
- LME
Geometry
- Grade
- 0.037
- Grade Unit
- g/t
- Intercept
- 1 m
- From
- 34.5 m
- To
- 35.5 m
- Hole Depth
- 237 m
Classification
- Deposit Type
- orogenic
- Program
- resource
- Sample Type
- drill
- Group ID
- LBX25-097:34.5-35.5
- Mining Method
- open_pit
Location
- Easting
- 446537
- Northing
- 5513245
- Elevation
- 323 m
- Azimuth
- 128 °
- Dip
- -46 °
- Loc. Confidence
- high
QA/QC
- Laboratory
- ALS Global Analytical Lab
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates, check_assays
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-03T00:00:00.000Z
Reasoning: This narrow sub-interval shows very low-grade gold, well below the weak threshold for open pit orogenic gold, and is not material.
Positive factors
- qaqc_disclosed
- qp_signed
Negative factors
- apparent_width_only
- no_true_width_reported
- low_grade
- narrow_intercept
Evidence · table
“0.037”
Context: 1.00
Tags used in scoring
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: The drill holes were designed to support targeted infill drilling and improve geological confidence.
Evidence · text
“Drill holes LBX25-097 and LBX25-100 were designed to support targeted infill drilling”
Rejected tags
Rejected tags — excluded from scoring because their label or evidence could not be verified.
Apparent Width OnlyRejected · negative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Reason: The document explicitly states that 'The true widths of the mineralized zones are not known at this time'.
Evidence · text
“The true widths of the mineralized zones are not known at this time”
QA/QC DisclosedRejected · positive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Reason: The release includes a detailed 'Sampling and QA/QC Protocols' section, mentioning external standards, blanks, duplicates, and a certified lab.
Evidence · text
“LAURION employs an industry standard system of external standards, blanks and duplicates for all of its sampling, in addition to the QA/QC protocol employed by the laboratory.”
LBX25-097Ishkōday Project · goldGrade: 0.802Grade Unit: g/tIntercept: 0.65 mView all detailsHide details
Identity
- Hole ID
- LBX25-097
- Project
- Ishkōday Project
- Commodity
- gold
- Region
- canada_on
- Reported Region
- Ontario
- Ticker
- LME
Geometry
- Grade
- 0.802
- Grade Unit
- g/t
- Intercept
- 0.65 m
- From
- 52.6 m
- To
- 53.25 m
- Hole Depth
- 237 m
Classification
- Deposit Type
- orogenic
- Program
- resource
- Sample Type
- drill
- Group ID
- LBX25-097:52.6-53.25
- Mining Method
- open_pit
Location
- Easting
- 446537
- Northing
- 5513245
- Elevation
- 323 m
- Azimuth
- 128 °
- Dip
- -46 °
- Loc. Confidence
- high
QA/QC
- Laboratory
- ALS Global Analytical Lab
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates, check_assays
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-03T00:00:00.000Z
Reasoning: This narrow intercept shows a moderate gold grade for open pit orogenic gold, but its limited width reduces its overall materiality.
Positive factors
- moderate_grade
- qaqc_disclosed
- qp_signed
Negative factors
- apparent_width_only
- no_true_width_reported
- narrow_intercept
Evidence · table
“0.802”
Context: 0.65
Tags used in scoring
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: The drill holes were designed to support targeted infill drilling and improve geological confidence.
Evidence · text
“Drill holes LBX25-097 and LBX25-100 were designed to support targeted infill drilling”
Rejected tags
Rejected tags — excluded from scoring because their label or evidence could not be verified.
Apparent Width OnlyRejected · negative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Reason: The document explicitly states that 'The true widths of the mineralized zones are not known at this time'.
Evidence · text
“The true widths of the mineralized zones are not known at this time”
QA/QC DisclosedRejected · positive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Reason: The release includes a detailed 'Sampling and QA/QC Protocols' section, mentioning external standards, blanks, duplicates, and a certified lab.
Evidence · text
“LAURION employs an industry standard system of external standards, blanks and duplicates for all of its sampling, in addition to the QA/QC protocol employed by the laboratory.”
LBX25-097Ishkōday Project · goldGrade: 0.127Grade Unit: g/tIntercept: 0.5 mView all detailsHide details
Identity
- Hole ID
- LBX25-097
- Project
- Ishkōday Project
- Commodity
- gold
- Region
- canada_on
- Reported Region
- Ontario
- Ticker
- LME
Geometry
- Grade
- 0.127
- Grade Unit
- g/t
- Intercept
- 0.5 m
- From
- 55 m
- To
- 55.5 m
- Hole Depth
- 237 m
Classification
- Deposit Type
- orogenic
- Program
- resource
- Sample Type
- drill
- Group ID
- LBX25-097:55.0-55.5
- Mining Method
- open_pit
Location
- Easting
- 446537
- Northing
- 5513245
- Elevation
- 323 m
- Azimuth
- 128 °
- Dip
- -46 °
- Loc. Confidence
- high
QA/QC
- Laboratory
- ALS Global Analytical Lab
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates, check_assays
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-03T00:00:00.000Z
Reasoning: This narrow intercept shows very low-grade gold, well below the weak threshold for open pit orogenic gold, and is not material.
Positive factors
- qaqc_disclosed
- qp_signed
Negative factors
- apparent_width_only
- no_true_width_reported
- low_grade
- narrow_intercept
Evidence · table
“0.127”
Context: 0.50
Tags used in scoring
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: The drill holes were designed to support targeted infill drilling and improve geological confidence.
Evidence · text
“Drill holes LBX25-097 and LBX25-100 were designed to support targeted infill drilling”
Rejected tags
Rejected tags — excluded from scoring because their label or evidence could not be verified.
Apparent Width OnlyRejected · negative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Reason: The document explicitly states that 'The true widths of the mineralized zones are not known at this time'.
Evidence · text
“The true widths of the mineralized zones are not known at this time”
QA/QC DisclosedRejected · positive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Reason: The release includes a detailed 'Sampling and QA/QC Protocols' section, mentioning external standards, blanks, duplicates, and a certified lab.
Evidence · text
“LAURION employs an industry standard system of external standards, blanks and duplicates for all of its sampling, in addition to the QA/QC protocol employed by the laboratory.”
LBX25-097Ishkōday Project · goldGrade: 0.454Grade Unit: g/tIntercept: 0.7 mView all detailsHide details
Identity
- Hole ID
- LBX25-097
- Project
- Ishkōday Project
- Commodity
- gold
- Region
- canada_on
- Reported Region
- Ontario
- Ticker
- LME
Geometry
- Grade
- 0.454
- Grade Unit
- g/t
- Intercept
- 0.7 m
- From
- 64.5 m
- To
- 65.2 m
- Hole Depth
- 237 m
Classification
- Deposit Type
- orogenic
- Program
- resource
- Sample Type
- drill
- Group ID
- LBX25-097:64.5-65.2
- Mining Method
- open_pit
Location
- Easting
- 446537
- Northing
- 5513245
- Elevation
- 323 m
- Azimuth
- 128 °
- Dip
- -46 °
- Loc. Confidence
- high
QA/QC
- Laboratory
- ALS Global Analytical Lab
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates, check_assays
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-03T00:00:00.000Z
Reasoning: This narrow intercept shows a weak gold grade for open pit orogenic gold, but its limited width reduces its overall materiality.
Positive factors
- qaqc_disclosed
- qp_signed
Negative factors
- apparent_width_only
- no_true_width_reported
- narrow_intercept
Evidence · table
“0.454”
Context: 0.70
Tags used in scoring
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: The drill holes were designed to support targeted infill drilling and improve geological confidence.
Evidence · text
“Drill holes LBX25-097 and LBX25-100 were designed to support targeted infill drilling”
Rejected tags
Rejected tags — excluded from scoring because their label or evidence could not be verified.
Apparent Width OnlyRejected · negative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Reason: The document explicitly states that 'The true widths of the mineralized zones are not known at this time'.
Evidence · text
“The true widths of the mineralized zones are not known at this time”
QA/QC DisclosedRejected · positive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Reason: The release includes a detailed 'Sampling and QA/QC Protocols' section, mentioning external standards, blanks, duplicates, and a certified lab.
Evidence · text
“LAURION employs an industry standard system of external standards, blanks and duplicates for all of its sampling, in addition to the QA/QC protocol employed by the laboratory.”
LBX25-097Ishkōday Project · goldGrade: 0.437Grade Unit: g/tIntercept: 0.6 mView all detailsHide details
Identity
- Hole ID
- LBX25-097
- Project
- Ishkōday Project
- Commodity
- gold
- Region
- canada_on
- Reported Region
- Ontario
- Ticker
- LME
Geometry
- Grade
- 0.437
- Grade Unit
- g/t
- Intercept
- 0.6 m
- From
- 66.8 m
- To
- 67.4 m
- Hole Depth
- 237 m
Classification
- Deposit Type
- orogenic
- Program
- resource
- Sample Type
- drill
- Group ID
- LBX25-097:66.8-67.4
- Mining Method
- open_pit
Location
- Easting
- 446537
- Northing
- 5513245
- Elevation
- 323 m
- Azimuth
- 128 °
- Dip
- -46 °
- Loc. Confidence
- high
QA/QC
- Laboratory
- ALS Global Analytical Lab
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates, check_assays
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-03T00:00:00.000Z
Reasoning: This narrow intercept shows a weak gold grade for open pit orogenic gold, but its limited width reduces its overall materiality.
Positive factors
- qaqc_disclosed
- qp_signed
Negative factors
- apparent_width_only
- no_true_width_reported
- narrow_intercept
Evidence · table
“0.437”
Context: 0.60
Tags used in scoring
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: The drill holes were designed to support targeted infill drilling and improve geological confidence.
Evidence · text
“Drill holes LBX25-097 and LBX25-100 were designed to support targeted infill drilling”
Rejected tags
Rejected tags — excluded from scoring because their label or evidence could not be verified.
Apparent Width OnlyRejected · negative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Reason: The document explicitly states that 'The true widths of the mineralized zones are not known at this time'.
Evidence · text
“The true widths of the mineralized zones are not known at this time”
QA/QC DisclosedRejected · positive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Reason: The release includes a detailed 'Sampling and QA/QC Protocols' section, mentioning external standards, blanks, duplicates, and a certified lab.
Evidence · text
“LAURION employs an industry standard system of external standards, blanks and duplicates for all of its sampling, in addition to the QA/QC protocol employed by the laboratory.”
LBX25-097Ishkōday Project · goldGrade: 0.777Grade Unit: g/tIntercept: 0.5 mView all detailsHide details
Identity
- Hole ID
- LBX25-097
- Project
- Ishkōday Project
- Commodity
- gold
- Region
- canada_on
- Reported Region
- Ontario
- Ticker
- LME
Geometry
- Grade
- 0.777
- Grade Unit
- g/t
- Intercept
- 0.5 m
- From
- 76.5 m
- To
- 77 m
- Hole Depth
- 237 m
Classification
- Deposit Type
- orogenic
- Program
- resource
- Sample Type
- drill
- Group ID
- LBX25-097:76.5-77.0
- Mining Method
- open_pit
Location
- Easting
- 446537
- Northing
- 5513245
- Elevation
- 323 m
- Azimuth
- 128 °
- Dip
- -46 °
- Loc. Confidence
- high
QA/QC
- Laboratory
- ALS Global Analytical Lab
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates, check_assays
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-03T00:00:00.000Z
Reasoning: This narrow intercept shows a weak gold grade for open pit orogenic gold, but its limited width reduces its overall materiality.
Positive factors
- qaqc_disclosed
- qp_signed
Negative factors
- apparent_width_only
- no_true_width_reported
- narrow_intercept
Evidence · table
“0.777”
Context: 0.50
Tags used in scoring
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: The drill holes were designed to support targeted infill drilling and improve geological confidence.
Evidence · text
“Drill holes LBX25-097 and LBX25-100 were designed to support targeted infill drilling”
Rejected tags
Rejected tags — excluded from scoring because their label or evidence could not be verified.
Apparent Width OnlyRejected · negative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Reason: The document explicitly states that 'The true widths of the mineralized zones are not known at this time'.
Evidence · text
“The true widths of the mineralized zones are not known at this time”
QA/QC DisclosedRejected · positive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Reason: The release includes a detailed 'Sampling and QA/QC Protocols' section, mentioning external standards, blanks, duplicates, and a certified lab.
Evidence · text
“LAURION employs an industry standard system of external standards, blanks and duplicates for all of its sampling, in addition to the QA/QC protocol employed by the laboratory.”
LBX25-097Ishkōday Project · goldGrade: 0.617Grade Unit: g/tIntercept: 15.5 mView all detailsHide details
Identity
- Hole ID
- LBX25-097
- Project
- Ishkōday Project
- Commodity
- gold
- Region
- canada_on
- Reported Region
- Ontario
- Ticker
- LME
Geometry
- Grade
- 0.617
- Grade Unit
- g/t
- Intercept
- 15.5 m
- From
- 135.5 m
- To
- 151 m
- Hole Depth
- 237 m
Classification
- Deposit Type
- orogenic
- Program
- resource
- Sample Type
- drill
- Group ID
- LBX25-097:135.5-151.0
- Mining Method
- open_pit
Location
- Easting
- 446537
- Northing
- 5513245
- Elevation
- 323 m
- Azimuth
- 128 °
- Dip
- -46 °
- Loc. Confidence
- high
QA/QC
- Laboratory
- ALS Global Analytical Lab
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates, check_assays
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-03T00:00:00.000Z
Reasoning: This wide intercept shows a weak gold grade for open pit orogenic gold. While the width is significant, the grade is below the weak GT threshold, limiting its materiality.
Positive factors
- wide_intercept
- qaqc_disclosed
- qp_signed
Negative factors
- apparent_width_only
- no_true_width_reported
- low_grade
Evidence · table
“0.617”
Context: 15.50
Tags used in scoring
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: The drill holes were designed to support targeted infill drilling and improve geological confidence.
Evidence · text
“Drill holes LBX25-097 and LBX25-100 were designed to support targeted infill drilling”
Rejected tags
Rejected tags — excluded from scoring because their label or evidence could not be verified.
Apparent Width OnlyRejected · negative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Reason: The document explicitly states that 'The true widths of the mineralized zones are not known at this time'.
Evidence · text
“The true widths of the mineralized zones are not known at this time”
QA/QC DisclosedRejected · positive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Reason: The release includes a detailed 'Sampling and QA/QC Protocols' section, mentioning external standards, blanks, duplicates, and a certified lab.
Evidence · text
“LAURION employs an industry standard system of external standards, blanks and duplicates for all of its sampling, in addition to the QA/QC protocol employed by the laboratory.”
LBX25-097Ishkōday Project · goldGrade: 0.732Grade Unit: g/tIntercept: 7.7 mView all detailsHide details
Identity
- Hole ID
- LBX25-097
- Project
- Ishkōday Project
- Commodity
- gold
- Region
- canada_on
- Reported Region
- Ontario
- Ticker
- LME
Geometry
- Grade
- 0.732
- Grade Unit
- g/t
- Intercept
- 7.7 m
- From
- 135.5 m
- To
- 143.2 m
- Hole Depth
- 237 m
Classification
- Deposit Type
- orogenic
- Program
- resource
- Sample Type
- drill
- Group ID
- LBX25-097:135.5-143.2
- Mining Method
- open_pit
Location
- Easting
- 446537
- Northing
- 5513245
- Elevation
- 323 m
- Azimuth
- 128 °
- Dip
- -46 °
- Loc. Confidence
- high
QA/QC
- Laboratory
- ALS Global Analytical Lab
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates, check_assays
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-03T00:00:00.000Z
Reasoning: This sub-interval shows a weak gold grade for open pit orogenic gold over a moderate width. The grade-thickness product is below the weak threshold.
Positive factors
- qaqc_disclosed
- qp_signed
Negative factors
- apparent_width_only
- no_true_width_reported
- low_grade
Evidence · table
“0.732”
Context: 7.70
Tags used in scoring
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: The drill holes were designed to support targeted infill drilling and improve geological confidence.
Evidence · text
“Drill holes LBX25-097 and LBX25-100 were designed to support targeted infill drilling”
Rejected tags
Rejected tags — excluded from scoring because their label or evidence could not be verified.
Apparent Width OnlyRejected · negative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Reason: The document explicitly states that 'The true widths of the mineralized zones are not known at this time'.
Evidence · text
“The true widths of the mineralized zones are not known at this time”
QA/QC DisclosedRejected · positive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Reason: The release includes a detailed 'Sampling and QA/QC Protocols' section, mentioning external standards, blanks, duplicates, and a certified lab.
Evidence · text
“LAURION employs an industry standard system of external standards, blanks and duplicates for all of its sampling, in addition to the QA/QC protocol employed by the laboratory.”
LBX25-097Ishkōday Project · goldGrade: 4.35Grade Unit: g/tIntercept: 0.9 mView all detailsHide details
Identity
- Hole ID
- LBX25-097
- Project
- Ishkōday Project
- Commodity
- gold
- Region
- canada_on
- Reported Region
- Ontario
- Ticker
- LME
Geometry
- Grade
- 4.35
- Grade Unit
- g/t
- Intercept
- 0.9 m
- From
- 135.5 m
- To
- 136.4 m
- Hole Depth
- 237 m
Classification
- Deposit Type
- orogenic
- Program
- resource
- Sample Type
- drill
- Group ID
- LBX25-097:135.5-136.4
- Mining Method
- open_pit
Location
- Easting
- 446537
- Northing
- 5513245
- Elevation
- 323 m
- Azimuth
- 128 °
- Dip
- -46 °
- Loc. Confidence
- high
QA/QC
- Laboratory
- ALS Global Analytical Lab
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates, check_assays
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-03T00:00:00.000Z
Reasoning: This narrow sub-interval shows a strong gold grade for open pit orogenic gold, but its very limited width reduces its overall materiality, with a GT product below the weak threshold.
Positive factors
- high_grade
- qaqc_disclosed
- qp_signed
Negative factors
- apparent_width_only
- no_true_width_reported
- narrow_intercept
Evidence · table
“4.350”
Context: 0.90
Tags used in scoring
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: The drill holes were designed to support targeted infill drilling and improve geological confidence.
Evidence · text
“Drill holes LBX25-097 and LBX25-100 were designed to support targeted infill drilling”
Rejected tags
Rejected tags — excluded from scoring because their label or evidence could not be verified.
Apparent Width OnlyRejected · negative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Reason: The document explicitly states that 'The true widths of the mineralized zones are not known at this time'.
Evidence · text
“The true widths of the mineralized zones are not known at this time”
QA/QC DisclosedRejected · positive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Reason: The release includes a detailed 'Sampling and QA/QC Protocols' section, mentioning external standards, blanks, duplicates, and a certified lab.
Evidence · text
“LAURION employs an industry standard system of external standards, blanks and duplicates for all of its sampling, in addition to the QA/QC protocol employed by the laboratory.”
LBX25-097Ishkōday Project · goldGrade: 1.445Grade Unit: g/tIntercept: 1 mView all detailsHide details
Identity
- Hole ID
- LBX25-097
- Project
- Ishkōday Project
- Commodity
- gold
- Region
- canada_on
- Reported Region
- Ontario
- Ticker
- LME
Geometry
- Grade
- 1.445
- Grade Unit
- g/t
- Intercept
- 1 m
- From
- 148.9 m
- To
- 149.9 m
- Hole Depth
- 237 m
Classification
- Deposit Type
- orogenic
- Program
- resource
- Sample Type
- drill
- Group ID
- LBX25-097:148.9-149.9
- Mining Method
- open_pit
Location
- Easting
- 446537
- Northing
- 5513245
- Elevation
- 323 m
- Azimuth
- 128 °
- Dip
- -46 °
- Loc. Confidence
- high
QA/QC
- Laboratory
- ALS Global Analytical Lab
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates, check_assays
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-03T00:00:00.000Z
Reasoning: This narrow sub-interval shows a moderate gold grade for open pit orogenic gold, but its limited width reduces its overall materiality.
Positive factors
- moderate_grade
- qaqc_disclosed
- qp_signed
Negative factors
- apparent_width_only
- no_true_width_reported
- narrow_intercept
Evidence · table
“1.445”
Context: 1.00
Tags used in scoring
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: The drill holes were designed to support targeted infill drilling and improve geological confidence.
Evidence · text
“Drill holes LBX25-097 and LBX25-100 were designed to support targeted infill drilling”
Rejected tags
Rejected tags — excluded from scoring because their label or evidence could not be verified.
Apparent Width OnlyRejected · negative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Reason: The document explicitly states that 'The true widths of the mineralized zones are not known at this time'.
Evidence · text
“The true widths of the mineralized zones are not known at this time”
QA/QC DisclosedRejected · positive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Reason: The release includes a detailed 'Sampling and QA/QC Protocols' section, mentioning external standards, blanks, duplicates, and a certified lab.
Evidence · text
“LAURION employs an industry standard system of external standards, blanks and duplicates for all of its sampling, in addition to the QA/QC protocol employed by the laboratory.”
LBX25-097Ishkōday Project · goldGrade: 1.1Grade Unit: g/tIntercept: 0.5 mView all detailsHide details
Identity
- Hole ID
- LBX25-097
- Project
- Ishkōday Project
- Commodity
- gold
- Region
- canada_on
- Reported Region
- Ontario
- Ticker
- LME
Geometry
- Grade
- 1.1
- Grade Unit
- g/t
- Intercept
- 0.5 m
- From
- 158.75 m
- To
- 159.25 m
- Hole Depth
- 237 m
Classification
- Deposit Type
- orogenic
- Program
- resource
- Sample Type
- drill
- Group ID
- LBX25-097:158.75-159.25
- Mining Method
- open_pit
Location
- Easting
- 446537
- Northing
- 5513245
- Elevation
- 323 m
- Azimuth
- 128 °
- Dip
- -46 °
- Loc. Confidence
- high
QA/QC
- Laboratory
- ALS Global Analytical Lab
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates, check_assays
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-03T00:00:00.000Z
Reasoning: This narrow intercept shows a moderate gold grade for open pit orogenic gold, but its limited width reduces its overall materiality.
Positive factors
- moderate_grade
- qaqc_disclosed
- qp_signed
Negative factors
- apparent_width_only
- no_true_width_reported
- narrow_intercept
Evidence · table
“1.100”
Context: 0.50
Tags used in scoring
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: The drill holes were designed to support targeted infill drilling and improve geological confidence.
Evidence · text
“Drill holes LBX25-097 and LBX25-100 were designed to support targeted infill drilling”
Rejected tags
Rejected tags — excluded from scoring because their label or evidence could not be verified.
Apparent Width OnlyRejected · negative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Reason: The document explicitly states that 'The true widths of the mineralized zones are not known at this time'.
Evidence · text
“The true widths of the mineralized zones are not known at this time”
QA/QC DisclosedRejected · positive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Reason: The release includes a detailed 'Sampling and QA/QC Protocols' section, mentioning external standards, blanks, duplicates, and a certified lab.
Evidence · text
“LAURION employs an industry standard system of external standards, blanks and duplicates for all of its sampling, in addition to the QA/QC protocol employed by the laboratory.”
LBX25-097Ishkōday Project · goldGrade: 0.278Grade Unit: g/tIntercept: 0.5 mView all detailsHide details
Identity
- Hole ID
- LBX25-097
- Project
- Ishkōday Project
- Commodity
- gold
- Region
- canada_on
- Reported Region
- Ontario
- Ticker
- LME
Geometry
- Grade
- 0.278
- Grade Unit
- g/t
- Intercept
- 0.5 m
- From
- 170.9 m
- To
- 171.4 m
- Hole Depth
- 237 m
Classification
- Deposit Type
- orogenic
- Program
- resource
- Sample Type
- drill
- Group ID
- LBX25-097:170.9-171.4
- Mining Method
- open_pit
Location
- Easting
- 446537
- Northing
- 5513245
- Elevation
- 323 m
- Azimuth
- 128 °
- Dip
- -46 °
- Loc. Confidence
- high
QA/QC
- Laboratory
- ALS Global Analytical Lab
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates, check_assays
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-03T00:00:00.000Z
Reasoning: This narrow intercept shows very low-grade gold, below the weak threshold for open pit orogenic gold, and is not material.
Positive factors
- qaqc_disclosed
- qp_signed
Negative factors
- apparent_width_only
- no_true_width_reported
- low_grade
- narrow_intercept
Evidence · table
“0.278”
Context: 0.50
Tags used in scoring
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: The drill holes were designed to support targeted infill drilling and improve geological confidence.
Evidence · text
“Drill holes LBX25-097 and LBX25-100 were designed to support targeted infill drilling”
Rejected tags
Rejected tags — excluded from scoring because their label or evidence could not be verified.
Apparent Width OnlyRejected · negative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Reason: The document explicitly states that 'The true widths of the mineralized zones are not known at this time'.
Evidence · text
“The true widths of the mineralized zones are not known at this time”
QA/QC DisclosedRejected · positive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Reason: The release includes a detailed 'Sampling and QA/QC Protocols' section, mentioning external standards, blanks, duplicates, and a certified lab.
Evidence · text
“LAURION employs an industry standard system of external standards, blanks and duplicates for all of its sampling, in addition to the QA/QC protocol employed by the laboratory.”
LBX25-097Ishkōday Project · goldGrade: 0.786Grade Unit: g/tIntercept: 0.6 mView all detailsHide details
Identity
- Hole ID
- LBX25-097
- Project
- Ishkōday Project
- Commodity
- gold
- Region
- canada_on
- Reported Region
- Ontario
- Ticker
- LME
Geometry
- Grade
- 0.786
- Grade Unit
- g/t
- Intercept
- 0.6 m
- From
- 172.4 m
- To
- 173 m
- Hole Depth
- 237 m
Classification
- Deposit Type
- orogenic
- Program
- resource
- Sample Type
- drill
- Group ID
- LBX25-097:172.4-173.0
- Mining Method
- open_pit
Location
- Easting
- 446537
- Northing
- 5513245
- Elevation
- 323 m
- Azimuth
- 128 °
- Dip
- -46 °
- Loc. Confidence
- high
QA/QC
- Laboratory
- ALS Global Analytical Lab
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates, check_assays
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-03T00:00:00.000Z
Reasoning: This narrow intercept shows a weak gold grade for open pit orogenic gold, but its limited width reduces its overall materiality.
Positive factors
- qaqc_disclosed
- qp_signed
Negative factors
- apparent_width_only
- no_true_width_reported
- narrow_intercept
Evidence · table
“0.786”
Context: 0.60
Tags used in scoring
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: The drill holes were designed to support targeted infill drilling and improve geological confidence.
Evidence · text
“Drill holes LBX25-097 and LBX25-100 were designed to support targeted infill drilling”
Rejected tags
Rejected tags — excluded from scoring because their label or evidence could not be verified.
Apparent Width OnlyRejected · negative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Reason: The document explicitly states that 'The true widths of the mineralized zones are not known at this time'.
Evidence · text
“The true widths of the mineralized zones are not known at this time”
QA/QC DisclosedRejected · positive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Reason: The release includes a detailed 'Sampling and QA/QC Protocols' section, mentioning external standards, blanks, duplicates, and a certified lab.
Evidence · text
“LAURION employs an industry standard system of external standards, blanks and duplicates for all of its sampling, in addition to the QA/QC protocol employed by the laboratory.”
LBX25-100Ishkōday Project · goldGrade: 0.407Grade Unit: g/tIntercept: 0.5 mView all detailsHide details
Identity
- Hole ID
- LBX25-100
- Project
- Ishkōday Project
- Commodity
- gold
- Region
- canada_on
- Reported Region
- Ontario
- Ticker
- LME
Geometry
- Grade
- 0.407
- Grade Unit
- g/t
- Intercept
- 0.5 m
- From
- 22.8 m
- To
- 23.3 m
- Hole Depth
- 300 m
Classification
- Deposit Type
- orogenic
- Program
- resource
- Sample Type
- drill
- Group ID
- LBX25-100:22.8-23.3
- Mining Method
- open_pit
Location
- Easting
- 446494
- Northing
- 5513229
- Elevation
- 322.4 m
- Azimuth
- 130 °
- Dip
- -50 °
- Loc. Confidence
- high
QA/QC
- Laboratory
- ALS Global Analytical Lab
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates, check_assays
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-03T00:00:00.000Z
Reasoning: This narrow intercept shows a weak gold grade for open pit orogenic gold, but its limited width reduces its overall materiality.
Positive factors
- qaqc_disclosed
- qp_signed
Negative factors
- apparent_width_only
- no_true_width_reported
- narrow_intercept
Evidence · table
“0.407”
Context: 0.50
Tags used in scoring
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: The drill holes were designed to support targeted infill drilling and improve geological confidence.
Evidence · text
“Drill holes LBX25-097 and LBX25-100 were designed to support targeted infill drilling”
Rejected tags
Rejected tags — excluded from scoring because their label or evidence could not be verified.
Apparent Width OnlyRejected · negative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Reason: The document explicitly states that 'The true widths of the mineralized zones are not known at this time'.
Evidence · text
“The true widths of the mineralized zones are not known at this time”
QA/QC DisclosedRejected · positive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Reason: The release includes a detailed 'Sampling and QA/QC Protocols' section, mentioning external standards, blanks, duplicates, and a certified lab.
Evidence · text
“LAURION employs an industry standard system of external standards, blanks and duplicates for all of its sampling, in addition to the QA/QC protocol employed by the laboratory.”
LBX25-100Ishkōday Project · goldGrade: 0.575Grade Unit: g/tIntercept: 0.8 mView all detailsHide details
Identity
- Hole ID
- LBX25-100
- Project
- Ishkōday Project
- Commodity
- gold
- Region
- canada_on
- Reported Region
- Ontario
- Ticker
- LME
Geometry
- Grade
- 0.575
- Grade Unit
- g/t
- Intercept
- 0.8 m
- From
- 26.5 m
- To
- 27.3 m
- Hole Depth
- 300 m
Classification
- Deposit Type
- orogenic
- Program
- resource
- Sample Type
- drill
- Group ID
- LBX25-100:26.5-27.3
- Mining Method
- open_pit
Location
- Easting
- 446494
- Northing
- 5513229
- Elevation
- 322.4 m
- Azimuth
- 130 °
- Dip
- -50 °
- Loc. Confidence
- high
QA/QC
- Laboratory
- ALS Global Analytical Lab
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates, check_assays
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-03T00:00:00.000Z
Reasoning: This narrow intercept shows a weak gold grade for open pit orogenic gold, but its limited width reduces its overall materiality.
Positive factors
- qaqc_disclosed
- qp_signed
Negative factors
- apparent_width_only
- no_true_width_reported
- narrow_intercept
Evidence · table
“0.575”
Context: 0.80
Tags used in scoring
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: The drill holes were designed to support targeted infill drilling and improve geological confidence.
Evidence · text
“Drill holes LBX25-097 and LBX25-100 were designed to support targeted infill drilling”
Rejected tags
Rejected tags — excluded from scoring because their label or evidence could not be verified.
Apparent Width OnlyRejected · negative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Reason: The document explicitly states that 'The true widths of the mineralized zones are not known at this time'.
Evidence · text
“The true widths of the mineralized zones are not known at this time”
QA/QC DisclosedRejected · positive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Reason: The release includes a detailed 'Sampling and QA/QC Protocols' section, mentioning external standards, blanks, duplicates, and a certified lab.
Evidence · text
“LAURION employs an industry standard system of external standards, blanks and duplicates for all of its sampling, in addition to the QA/QC protocol employed by the laboratory.”
LBX25-100Ishkōday Project · goldGrade: 0.109Grade Unit: g/tIntercept: 9.8 mView all detailsHide details
Identity
- Hole ID
- LBX25-100
- Project
- Ishkōday Project
- Commodity
- gold
- Region
- canada_on
- Reported Region
- Ontario
- Ticker
- LME
Geometry
- Grade
- 0.109
- Grade Unit
- g/t
- Intercept
- 9.8 m
- From
- 39 m
- To
- 48.8 m
- Hole Depth
- 300 m
Classification
- Deposit Type
- orogenic
- Program
- resource
- Sample Type
- drill
- Group ID
- LBX25-100:39.0-48.8
- Mining Method
- open_pit
Location
- Easting
- 446494
- Northing
- 5513229
- Elevation
- 322.4 m
- Azimuth
- 130 °
- Dip
- -50 °
- Loc. Confidence
- high
QA/QC
- Laboratory
- ALS Global Analytical Lab
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates, check_assays
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-03T00:00:00.000Z
Reasoning: This wide intercept shows very low-grade gold, well below the weak threshold for open pit orogenic gold, limiting its materiality despite the width.
Positive factors
- wide_intercept
- qaqc_disclosed
- qp_signed
Negative factors
- apparent_width_only
- no_true_width_reported
- low_grade
Evidence · table
“0.109”
Context: 9.80
Tags used in scoring
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: The drill holes were designed to support targeted infill drilling and improve geological confidence.
Evidence · text
“Drill holes LBX25-097 and LBX25-100 were designed to support targeted infill drilling”
Rejected tags
Rejected tags — excluded from scoring because their label or evidence could not be verified.
Apparent Width OnlyRejected · negative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Reason: The document explicitly states that 'The true widths of the mineralized zones are not known at this time'.
Evidence · text
“The true widths of the mineralized zones are not known at this time”
QA/QC DisclosedRejected · positive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Reason: The release includes a detailed 'Sampling and QA/QC Protocols' section, mentioning external standards, blanks, duplicates, and a certified lab.
Evidence · text
“LAURION employs an industry standard system of external standards, blanks and duplicates for all of its sampling, in addition to the QA/QC protocol employed by the laboratory.”
LBX25-100Ishkōday Project · goldGrade: 0.825Grade Unit: g/tIntercept: 0.5 mView all detailsHide details
Identity
- Hole ID
- LBX25-100
- Project
- Ishkōday Project
- Commodity
- gold
- Region
- canada_on
- Reported Region
- Ontario
- Ticker
- LME
Geometry
- Grade
- 0.825
- Grade Unit
- g/t
- Intercept
- 0.5 m
- From
- 48.3 m
- To
- 48.8 m
- Hole Depth
- 300 m
Classification
- Deposit Type
- orogenic
- Program
- resource
- Sample Type
- drill
- Group ID
- LBX25-100:48.3-48.8
- Mining Method
- open_pit
Location
- Easting
- 446494
- Northing
- 5513229
- Elevation
- 322.4 m
- Azimuth
- 130 °
- Dip
- -50 °
- Loc. Confidence
- high
QA/QC
- Laboratory
- ALS Global Analytical Lab
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates, check_assays
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-03T00:00:00.000Z
Reasoning: This narrow sub-interval shows a weak gold grade for open pit orogenic gold, but its very limited width reduces its overall materiality.
Positive factors
- qaqc_disclosed
- qp_signed
Negative factors
- apparent_width_only
- no_true_width_reported
- narrow_intercept
Evidence · table
“0.825”
Context: 0.50
Tags used in scoring
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: The drill holes were designed to support targeted infill drilling and improve geological confidence.
Evidence · text
“Drill holes LBX25-097 and LBX25-100 were designed to support targeted infill drilling”
Rejected tags
Rejected tags — excluded from scoring because their label or evidence could not be verified.
Apparent Width OnlyRejected · negative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Reason: The document explicitly states that 'The true widths of the mineralized zones are not known at this time'.
Evidence · text
“The true widths of the mineralized zones are not known at this time”
QA/QC DisclosedRejected · positive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Reason: The release includes a detailed 'Sampling and QA/QC Protocols' section, mentioning external standards, blanks, duplicates, and a certified lab.
Evidence · text
“LAURION employs an industry standard system of external standards, blanks and duplicates for all of its sampling, in addition to the QA/QC protocol employed by the laboratory.”
LBX25-100Ishkōday Project · goldGrade: 0.295Grade Unit: g/tIntercept: 2.5 mView all detailsHide details
Identity
- Hole ID
- LBX25-100
- Project
- Ishkōday Project
- Commodity
- gold
- Region
- canada_on
- Reported Region
- Ontario
- Ticker
- LME
Geometry
- Grade
- 0.295
- Grade Unit
- g/t
- Intercept
- 2.5 m
- From
- 67 m
- To
- 69.5 m
- Hole Depth
- 300 m
Classification
- Deposit Type
- orogenic
- Program
- resource
- Sample Type
- drill
- Group ID
- LBX25-100:67.0-69.5
- Mining Method
- open_pit
Location
- Easting
- 446494
- Northing
- 5513229
- Elevation
- 322.4 m
- Azimuth
- 130 °
- Dip
- -50 °
- Loc. Confidence
- high
QA/QC
- Laboratory
- ALS Global Analytical Lab
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates, check_assays
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-03T00:00:00.000Z
Reasoning: This intercept shows very low-grade gold, below the weak threshold for open pit orogenic gold, limiting its materiality.
Positive factors
- qaqc_disclosed
- qp_signed
Negative factors
- apparent_width_only
- no_true_width_reported
- low_grade
Evidence · table
“0.295”
Context: 2.50
Tags used in scoring
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: The drill holes were designed to support targeted infill drilling and improve geological confidence.
Evidence · text
“Drill holes LBX25-097 and LBX25-100 were designed to support targeted infill drilling”
Rejected tags
Rejected tags — excluded from scoring because their label or evidence could not be verified.
Apparent Width OnlyRejected · negative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Reason: The document explicitly states that 'The true widths of the mineralized zones are not known at this time'.
Evidence · text
“The true widths of the mineralized zones are not known at this time”
QA/QC DisclosedRejected · positive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Reason: The release includes a detailed 'Sampling and QA/QC Protocols' section, mentioning external standards, blanks, duplicates, and a certified lab.
Evidence · text
“LAURION employs an industry standard system of external standards, blanks and duplicates for all of its sampling, in addition to the QA/QC protocol employed by the laboratory.”
LBX25-100Ishkōday Project · goldGrade: 0.09Grade Unit: g/tIntercept: 5 mView all detailsHide details
Identity
- Hole ID
- LBX25-100
- Project
- Ishkōday Project
- Commodity
- gold
- Region
- canada_on
- Reported Region
- Ontario
- Ticker
- LME
Geometry
- Grade
- 0.09
- Grade Unit
- g/t
- Intercept
- 5 m
- From
- 87.5 m
- To
- 92.5 m
- Hole Depth
- 300 m
Classification
- Deposit Type
- orogenic
- Program
- resource
- Sample Type
- drill
- Group ID
- LBX25-100:87.5-92.5
- Mining Method
- open_pit
Location
- Easting
- 446494
- Northing
- 5513229
- Elevation
- 322.4 m
- Azimuth
- 130 °
- Dip
- -50 °
- Loc. Confidence
- high
QA/QC
- Laboratory
- ALS Global Analytical Lab
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates, check_assays
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-03T00:00:00.000Z
Reasoning: This intercept shows very low-grade gold, well below the weak threshold for open pit orogenic gold, limiting its materiality despite the width.
Positive factors
- qaqc_disclosed
- qp_signed
Negative factors
- apparent_width_only
- no_true_width_reported
- low_grade
Evidence · table
“0.090”
Context: 5.00
Tags used in scoring
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: The drill holes were designed to support targeted infill drilling and improve geological confidence.
Evidence · text
“Drill holes LBX25-097 and LBX25-100 were designed to support targeted infill drilling”
Rejected tags
Rejected tags — excluded from scoring because their label or evidence could not be verified.
Apparent Width OnlyRejected · negative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Reason: The document explicitly states that 'The true widths of the mineralized zones are not known at this time'.
Evidence · text
“The true widths of the mineralized zones are not known at this time”
QA/QC DisclosedRejected · positive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Reason: The release includes a detailed 'Sampling and QA/QC Protocols' section, mentioning external standards, blanks, duplicates, and a certified lab.
Evidence · text
“LAURION employs an industry standard system of external standards, blanks and duplicates for all of its sampling, in addition to the QA/QC protocol employed by the laboratory.”
LBX25-100Ishkōday Project · goldGrade: 0.282Grade Unit: g/tIntercept: 1 mView all detailsHide details
Identity
- Hole ID
- LBX25-100
- Project
- Ishkōday Project
- Commodity
- gold
- Region
- canada_on
- Reported Region
- Ontario
- Ticker
- LME
Geometry
- Grade
- 0.282
- Grade Unit
- g/t
- Intercept
- 1 m
- From
- 87.5 m
- To
- 88.5 m
- Hole Depth
- 300 m
Classification
- Deposit Type
- orogenic
- Program
- resource
- Sample Type
- drill
- Group ID
- LBX25-100:87.5-88.5
- Mining Method
- open_pit
Location
- Easting
- 446494
- Northing
- 5513229
- Elevation
- 322.4 m
- Azimuth
- 130 °
- Dip
- -50 °
- Loc. Confidence
- high
QA/QC
- Laboratory
- ALS Global Analytical Lab
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates, check_assays
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-03T00:00:00.000Z
Reasoning: This narrow sub-interval shows very low-grade gold, below the weak threshold for open pit orogenic gold, and is not material.
Positive factors
- qaqc_disclosed
- qp_signed
Negative factors
- apparent_width_only
- no_true_width_reported
- low_grade
- narrow_intercept
Evidence · table
“0.282”
Context: 1.00
Tags used in scoring
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: The drill holes were designed to support targeted infill drilling and improve geological confidence.
Evidence · text
“Drill holes LBX25-097 and LBX25-100 were designed to support targeted infill drilling”
Rejected tags
Rejected tags — excluded from scoring because their label or evidence could not be verified.
Apparent Width OnlyRejected · negative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Reason: The document explicitly states that 'The true widths of the mineralized zones are not known at this time'.
Evidence · text
“The true widths of the mineralized zones are not known at this time”
QA/QC DisclosedRejected · positive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Reason: The release includes a detailed 'Sampling and QA/QC Protocols' section, mentioning external standards, blanks, duplicates, and a certified lab.
Evidence · text
“LAURION employs an industry standard system of external standards, blanks and duplicates for all of its sampling, in addition to the QA/QC protocol employed by the laboratory.”
LBX25-100Ishkōday Project · goldGrade: 0.27Grade Unit: g/tIntercept: 0.5 mView all detailsHide details
Identity
- Hole ID
- LBX25-100
- Project
- Ishkōday Project
- Commodity
- gold
- Region
- canada_on
- Reported Region
- Ontario
- Ticker
- LME
Geometry
- Grade
- 0.27
- Grade Unit
- g/t
- Intercept
- 0.5 m
- From
- 88 m
- To
- 88.5 m
- Hole Depth
- 300 m
Classification
- Deposit Type
- orogenic
- Program
- resource
- Sample Type
- drill
- Group ID
- LBX25-100:88.0-88.5
- Mining Method
- open_pit
Location
- Easting
- 446494
- Northing
- 5513229
- Elevation
- 322.4 m
- Azimuth
- 130 °
- Dip
- -50 °
- Loc. Confidence
- high
QA/QC
- Laboratory
- ALS Global Analytical Lab
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates, check_assays
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-03T00:00:00.000Z
Reasoning: This narrow sub-interval shows very low-grade gold, below the weak threshold for open pit orogenic gold, and is not material.
Positive factors
- qaqc_disclosed
- qp_signed
Negative factors
- apparent_width_only
- no_true_width_reported
- low_grade
- narrow_intercept
Evidence · table
“0.270”
Context: 0.50
Tags used in scoring
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: The drill holes were designed to support targeted infill drilling and improve geological confidence.
Evidence · text
“Drill holes LBX25-097 and LBX25-100 were designed to support targeted infill drilling”
Rejected tags
Rejected tags — excluded from scoring because their label or evidence could not be verified.
Apparent Width OnlyRejected · negative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Reason: The document explicitly states that 'The true widths of the mineralized zones are not known at this time'.
Evidence · text
“The true widths of the mineralized zones are not known at this time”
QA/QC DisclosedRejected · positive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Reason: The release includes a detailed 'Sampling and QA/QC Protocols' section, mentioning external standards, blanks, duplicates, and a certified lab.
Evidence · text
“LAURION employs an industry standard system of external standards, blanks and duplicates for all of its sampling, in addition to the QA/QC protocol employed by the laboratory.”
LBX25-100Ishkōday Project · goldGrade: 0.158Grade Unit: g/tIntercept: 0.8 mView all detailsHide details
Identity
- Hole ID
- LBX25-100
- Project
- Ishkōday Project
- Commodity
- gold
- Region
- canada_on
- Reported Region
- Ontario
- Ticker
- LME
Geometry
- Grade
- 0.158
- Grade Unit
- g/t
- Intercept
- 0.8 m
- From
- 96.9 m
- To
- 97.7 m
- Hole Depth
- 300 m
Classification
- Deposit Type
- orogenic
- Program
- resource
- Sample Type
- drill
- Group ID
- LBX25-100:96.9-97.7
- Mining Method
- open_pit
Location
- Easting
- 446494
- Northing
- 5513229
- Elevation
- 322.4 m
- Azimuth
- 130 °
- Dip
- -50 °
- Loc. Confidence
- high
QA/QC
- Laboratory
- ALS Global Analytical Lab
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates, check_assays
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-03T00:00:00.000Z
Reasoning: This narrow intercept shows very low-grade gold, below the weak threshold for open pit orogenic gold, and is not material.
Positive factors
- qaqc_disclosed
- qp_signed
Negative factors
- apparent_width_only
- no_true_width_reported
- low_grade
- narrow_intercept
Evidence · table
“0.158”
Context: 0.80
Tags used in scoring
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: The drill holes were designed to support targeted infill drilling and improve geological confidence.
Evidence · text
“Drill holes LBX25-097 and LBX25-100 were designed to support targeted infill drilling”
Rejected tags
Rejected tags — excluded from scoring because their label or evidence could not be verified.
Apparent Width OnlyRejected · negative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Reason: The document explicitly states that 'The true widths of the mineralized zones are not known at this time'.
Evidence · text
“The true widths of the mineralized zones are not known at this time”
QA/QC DisclosedRejected · positive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Reason: The release includes a detailed 'Sampling and QA/QC Protocols' section, mentioning external standards, blanks, duplicates, and a certified lab.
Evidence · text
“LAURION employs an industry standard system of external standards, blanks and duplicates for all of its sampling, in addition to the QA/QC protocol employed by the laboratory.”
LBX25-100Ishkōday Project · goldGrade: 0.254Grade Unit: g/tIntercept: 0.8 mView all detailsHide details
Identity
- Hole ID
- LBX25-100
- Project
- Ishkōday Project
- Commodity
- gold
- Region
- canada_on
- Reported Region
- Ontario
- Ticker
- LME
Geometry
- Grade
- 0.254
- Grade Unit
- g/t
- Intercept
- 0.8 m
- From
- 106.5 m
- To
- 107.3 m
- Hole Depth
- 300 m
Classification
- Deposit Type
- orogenic
- Program
- resource
- Sample Type
- drill
- Group ID
- LBX25-100:106.5-107.3
- Mining Method
- open_pit
Location
- Easting
- 446494
- Northing
- 5513229
- Elevation
- 322.4 m
- Azimuth
- 130 °
- Dip
- -50 °
- Loc. Confidence
- high
QA/QC
- Laboratory
- ALS Global Analytical Lab
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates, check_assays
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-03T00:00:00.000Z
Reasoning: This narrow intercept shows very low-grade gold, below the weak threshold for open pit orogenic gold, and is not material.
Positive factors
- qaqc_disclosed
- qp_signed
Negative factors
- apparent_width_only
- no_true_width_reported
- low_grade
- narrow_intercept
Evidence · table
“0.254”
Context: 0.80
Tags used in scoring
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: The drill holes were designed to support targeted infill drilling and improve geological confidence.
Evidence · text
“Drill holes LBX25-097 and LBX25-100 were designed to support targeted infill drilling”
Rejected tags
Rejected tags — excluded from scoring because their label or evidence could not be verified.
Apparent Width OnlyRejected · negative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Reason: The document explicitly states that 'The true widths of the mineralized zones are not known at this time'.
Evidence · text
“The true widths of the mineralized zones are not known at this time”
QA/QC DisclosedRejected · positive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Reason: The release includes a detailed 'Sampling and QA/QC Protocols' section, mentioning external standards, blanks, duplicates, and a certified lab.
Evidence · text
“LAURION employs an industry standard system of external standards, blanks and duplicates for all of its sampling, in addition to the QA/QC protocol employed by the laboratory.”
LBX25-100Ishkōday Project · goldGrade: 0.102Grade Unit: g/tIntercept: 20 mView all detailsHide details
Identity
- Hole ID
- LBX25-100
- Project
- Ishkōday Project
- Commodity
- gold
- Region
- canada_on
- Reported Region
- Ontario
- Ticker
- LME
Geometry
- Grade
- 0.102
- Grade Unit
- g/t
- Intercept
- 20 m
- From
- 129.8 m
- To
- 149.8 m
- Hole Depth
- 300 m
Classification
- Deposit Type
- orogenic
- Program
- resource
- Sample Type
- drill
- Group ID
- LBX25-100:129.8-149.8
- Mining Method
- open_pit
Location
- Easting
- 446494
- Northing
- 5513229
- Elevation
- 322.4 m
- Azimuth
- 130 °
- Dip
- -50 °
- Loc. Confidence
- high
QA/QC
- Laboratory
- ALS Global Analytical Lab
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates, check_assays
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-03T00:00:00.000Z
Reasoning: This very wide intercept shows very low-grade gold, well below the weak threshold for open pit orogenic gold, limiting its materiality despite the width.
Positive factors
- wide_intercept
- qaqc_disclosed
- qp_signed
Negative factors
- apparent_width_only
- no_true_width_reported
- low_grade
Evidence · table
“0.102”
Context: 20.00
Tags used in scoring
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: The drill holes were designed to support targeted infill drilling and improve geological confidence.
Evidence · text
“Drill holes LBX25-097 and LBX25-100 were designed to support targeted infill drilling”
Rejected tags
Rejected tags — excluded from scoring because their label or evidence could not be verified.
Apparent Width OnlyRejected · negative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Reason: The document explicitly states that 'The true widths of the mineralized zones are not known at this time'.
Evidence · text
“The true widths of the mineralized zones are not known at this time”
QA/QC DisclosedRejected · positive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Reason: The release includes a detailed 'Sampling and QA/QC Protocols' section, mentioning external standards, blanks, duplicates, and a certified lab.
Evidence · text
“LAURION employs an industry standard system of external standards, blanks and duplicates for all of its sampling, in addition to the QA/QC protocol employed by the laboratory.”
LBX25-100Ishkōday Project · goldGrade: 0.937Grade Unit: g/tIntercept: 0.5 mView all detailsHide details
Identity
- Hole ID
- LBX25-100
- Project
- Ishkōday Project
- Commodity
- gold
- Region
- canada_on
- Reported Region
- Ontario
- Ticker
- LME
Geometry
- Grade
- 0.937
- Grade Unit
- g/t
- Intercept
- 0.5 m
- From
- 130.6 m
- To
- 131.1 m
- Hole Depth
- 300 m
Classification
- Deposit Type
- orogenic
- Program
- resource
- Sample Type
- drill
- Group ID
- LBX25-100:130.6-131.1
- Mining Method
- open_pit
Location
- Easting
- 446494
- Northing
- 5513229
- Elevation
- 322.4 m
- Azimuth
- 130 °
- Dip
- -50 °
- Loc. Confidence
- high
QA/QC
- Laboratory
- ALS Global Analytical Lab
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates, check_assays
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-03T00:00:00.000Z
Reasoning: This narrow sub-interval shows a weak gold grade for open pit orogenic gold, but its very limited width reduces its overall materiality.
Positive factors
- qaqc_disclosed
- qp_signed
Negative factors
- apparent_width_only
- no_true_width_reported
- narrow_intercept
Evidence · table
“0.937”
Context: 0.50
Tags used in scoring
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: The drill holes were designed to support targeted infill drilling and improve geological confidence.
Evidence · text
“Drill holes LBX25-097 and LBX25-100 were designed to support targeted infill drilling”
Rejected tags
Rejected tags — excluded from scoring because their label or evidence could not be verified.
Apparent Width OnlyRejected · negative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Reason: The document explicitly states that 'The true widths of the mineralized zones are not known at this time'.
Evidence · text
“The true widths of the mineralized zones are not known at this time”
QA/QC DisclosedRejected · positive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Reason: The release includes a detailed 'Sampling and QA/QC Protocols' section, mentioning external standards, blanks, duplicates, and a certified lab.
Evidence · text
“LAURION employs an industry standard system of external standards, blanks and duplicates for all of its sampling, in addition to the QA/QC protocol employed by the laboratory.”
LBX25-100Ishkōday Project · goldGrade: 0.193Grade Unit: g/tIntercept: 0.5 mView all detailsHide details
Identity
- Hole ID
- LBX25-100
- Project
- Ishkōday Project
- Commodity
- gold
- Region
- canada_on
- Reported Region
- Ontario
- Ticker
- LME
Geometry
- Grade
- 0.193
- Grade Unit
- g/t
- Intercept
- 0.5 m
- From
- 144.6 m
- To
- 145.1 m
- Hole Depth
- 300 m
Classification
- Deposit Type
- orogenic
- Program
- resource
- Sample Type
- drill
- Group ID
- LBX25-100:144.6-145.1
- Mining Method
- open_pit
Location
- Easting
- 446494
- Northing
- 5513229
- Elevation
- 322.4 m
- Azimuth
- 130 °
- Dip
- -50 °
- Loc. Confidence
- high
QA/QC
- Laboratory
- ALS Global Analytical Lab
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates, check_assays
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-03T00:00:00.000Z
Reasoning: This narrow sub-interval shows very low-grade gold, below the weak threshold for open pit orogenic gold, and is not material.
Positive factors
- qaqc_disclosed
- qp_signed
Negative factors
- apparent_width_only
- no_true_width_reported
- low_grade
- narrow_intercept
Evidence · table
“0.193”
Context: 0.50
Tags used in scoring
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: The drill holes were designed to support targeted infill drilling and improve geological confidence.
Evidence · text
“Drill holes LBX25-097 and LBX25-100 were designed to support targeted infill drilling”
Rejected tags
Rejected tags — excluded from scoring because their label or evidence could not be verified.
Apparent Width OnlyRejected · negative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Reason: The document explicitly states that 'The true widths of the mineralized zones are not known at this time'.
Evidence · text
“The true widths of the mineralized zones are not known at this time”
QA/QC DisclosedRejected · positive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Reason: The release includes a detailed 'Sampling and QA/QC Protocols' section, mentioning external standards, blanks, duplicates, and a certified lab.
Evidence · text
“LAURION employs an industry standard system of external standards, blanks and duplicates for all of its sampling, in addition to the QA/QC protocol employed by the laboratory.”
LBX25-100Ishkōday Project · goldGrade: 1.135Grade Unit: g/tIntercept: 0.8 mView all detailsHide details
Identity
- Hole ID
- LBX25-100
- Project
- Ishkōday Project
- Commodity
- gold
- Region
- canada_on
- Reported Region
- Ontario
- Ticker
- LME
Geometry
- Grade
- 1.135
- Grade Unit
- g/t
- Intercept
- 0.8 m
- From
- 169 m
- To
- 169.8 m
- Hole Depth
- 300 m
Classification
- Deposit Type
- orogenic
- Program
- resource
- Sample Type
- drill
- Group ID
- LBX25-100:169.0-169.8
- Mining Method
- open_pit
Location
- Easting
- 446494
- Northing
- 5513229
- Elevation
- 322.4 m
- Azimuth
- 130 °
- Dip
- -50 °
- Loc. Confidence
- high
QA/QC
- Laboratory
- ALS Global Analytical Lab
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates, check_assays
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-03T00:00:00.000Z
Reasoning: This narrow intercept shows a moderate gold grade for open pit orogenic gold, but its limited width reduces its overall materiality.
Positive factors
- moderate_grade
- qaqc_disclosed
- qp_signed
Negative factors
- apparent_width_only
- no_true_width_reported
- narrow_intercept
Evidence · table
“1.135”
Context: 0.80
Tags used in scoring
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: The drill holes were designed to support targeted infill drilling and improve geological confidence.
Evidence · text
“Drill holes LBX25-097 and LBX25-100 were designed to support targeted infill drilling”
Rejected tags
Rejected tags — excluded from scoring because their label or evidence could not be verified.
Apparent Width OnlyRejected · negative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Reason: The document explicitly states that 'The true widths of the mineralized zones are not known at this time'.
Evidence · text
“The true widths of the mineralized zones are not known at this time”
QA/QC DisclosedRejected · positive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Reason: The release includes a detailed 'Sampling and QA/QC Protocols' section, mentioning external standards, blanks, duplicates, and a certified lab.
Evidence · text
“LAURION employs an industry standard system of external standards, blanks and duplicates for all of its sampling, in addition to the QA/QC protocol employed by the laboratory.”
LBX25-100Ishkōday Project · goldGrade: 0.13Grade Unit: g/tIntercept: 8 mView all detailsHide details
Identity
- Hole ID
- LBX25-100
- Project
- Ishkōday Project
- Commodity
- gold
- Region
- canada_on
- Reported Region
- Ontario
- Ticker
- LME
Geometry
- Grade
- 0.13
- Grade Unit
- g/t
- Intercept
- 8 m
- From
- 179 m
- To
- 187 m
- Hole Depth
- 300 m
Classification
- Deposit Type
- orogenic
- Program
- resource
- Sample Type
- drill
- Group ID
- LBX25-100:179.0-187.0
- Mining Method
- open_pit
Location
- Easting
- 446494
- Northing
- 5513229
- Elevation
- 322.4 m
- Azimuth
- 130 °
- Dip
- -50 °
- Loc. Confidence
- high
QA/QC
- Laboratory
- ALS Global Analytical Lab
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates, check_assays
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-03T00:00:00.000Z
Reasoning: This wide intercept shows very low-grade gold, well below the weak threshold for open pit orogenic gold, limiting its materiality despite the width.
Positive factors
- wide_intercept
- qaqc_disclosed
- qp_signed
Negative factors
- apparent_width_only
- no_true_width_reported
- low_grade
Evidence · table
“0.130”
Context: 8.00
Tags used in scoring
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: The drill holes were designed to support targeted infill drilling and improve geological confidence.
Evidence · text
“Drill holes LBX25-097 and LBX25-100 were designed to support targeted infill drilling”
Rejected tags
Rejected tags — excluded from scoring because their label or evidence could not be verified.
Apparent Width OnlyRejected · negative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Reason: The document explicitly states that 'The true widths of the mineralized zones are not known at this time'.
Evidence · text
“The true widths of the mineralized zones are not known at this time”
QA/QC DisclosedRejected · positive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Reason: The release includes a detailed 'Sampling and QA/QC Protocols' section, mentioning external standards, blanks, duplicates, and a certified lab.
Evidence · text
“LAURION employs an industry standard system of external standards, blanks and duplicates for all of its sampling, in addition to the QA/QC protocol employed by the laboratory.”
LBX25-100Ishkōday Project · goldGrade: 0.403Grade Unit: g/tIntercept: 1.4 mView all detailsHide details
Identity
- Hole ID
- LBX25-100
- Project
- Ishkōday Project
- Commodity
- gold
- Region
- canada_on
- Reported Region
- Ontario
- Ticker
- LME
Geometry
- Grade
- 0.403
- Grade Unit
- g/t
- Intercept
- 1.4 m
- From
- 180 m
- To
- 181.4 m
- Hole Depth
- 300 m
Classification
- Deposit Type
- orogenic
- Program
- resource
- Sample Type
- drill
- Group ID
- LBX25-100:180.0-181.4
- Mining Method
- open_pit
Location
- Easting
- 446494
- Northing
- 5513229
- Elevation
- 322.4 m
- Azimuth
- 130 °
- Dip
- -50 °
- Loc. Confidence
- high
QA/QC
- Laboratory
- ALS Global Analytical Lab
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates, check_assays
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-03T00:00:00.000Z
Reasoning: This sub-interval shows a weak gold grade for open pit orogenic gold, but its limited width reduces its overall materiality.
Positive factors
- qaqc_disclosed
- qp_signed
Negative factors
- apparent_width_only
- no_true_width_reported
- low_grade
Evidence · table
“0.403”
Context: 1.40
Tags used in scoring
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: The drill holes were designed to support targeted infill drilling and improve geological confidence.
Evidence · text
“Drill holes LBX25-097 and LBX25-100 were designed to support targeted infill drilling”
Rejected tags
Rejected tags — excluded from scoring because their label or evidence could not be verified.
Apparent Width OnlyRejected · negative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Reason: The document explicitly states that 'The true widths of the mineralized zones are not known at this time'.
Evidence · text
“The true widths of the mineralized zones are not known at this time”
QA/QC DisclosedRejected · positive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Reason: The release includes a detailed 'Sampling and QA/QC Protocols' section, mentioning external standards, blanks, duplicates, and a certified lab.
Evidence · text
“LAURION employs an industry standard system of external standards, blanks and duplicates for all of its sampling, in addition to the QA/QC protocol employed by the laboratory.”
LBX25-100Ishkōday Project · goldGrade: 0.443Grade Unit: g/tIntercept: 0.7 mView all detailsHide details
Identity
- Hole ID
- LBX25-100
- Project
- Ishkōday Project
- Commodity
- gold
- Region
- canada_on
- Reported Region
- Ontario
- Ticker
- LME
Geometry
- Grade
- 0.443
- Grade Unit
- g/t
- Intercept
- 0.7 m
- From
- 183.7 m
- To
- 184.4 m
- Hole Depth
- 300 m
Classification
- Deposit Type
- orogenic
- Program
- resource
- Sample Type
- drill
- Group ID
- LBX25-100:183.7-184.4
- Mining Method
- open_pit
Location
- Easting
- 446494
- Northing
- 5513229
- Elevation
- 322.4 m
- Azimuth
- 130 °
- Dip
- -50 °
- Loc. Confidence
- high
QA/QC
- Laboratory
- ALS Global Analytical Lab
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates, check_assays
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-03T00:00:00.000Z
Reasoning: This sub-interval shows a weak gold grade for open pit orogenic gold, but its limited width reduces its overall materiality.
Positive factors
- qaqc_disclosed
- qp_signed
Negative factors
- apparent_width_only
- no_true_width_reported
- narrow_intercept
Evidence · table
“0.443”
Context: 0.70
Tags used in scoring
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: The drill holes were designed to support targeted infill drilling and improve geological confidence.
Evidence · text
“Drill holes LBX25-097 and LBX25-100 were designed to support targeted infill drilling”
Rejected tags
Rejected tags — excluded from scoring because their label or evidence could not be verified.
Apparent Width OnlyRejected · negative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Reason: The document explicitly states that 'The true widths of the mineralized zones are not known at this time'.
Evidence · text
“The true widths of the mineralized zones are not known at this time”
QA/QC DisclosedRejected · positive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Reason: The release includes a detailed 'Sampling and QA/QC Protocols' section, mentioning external standards, blanks, duplicates, and a certified lab.
Evidence · text
“LAURION employs an industry standard system of external standards, blanks and duplicates for all of its sampling, in addition to the QA/QC protocol employed by the laboratory.”
LBX25-100Ishkōday Project · goldGrade: 0.929Grade Unit: g/tIntercept: 0.6 mView all detailsHide details
Identity
- Hole ID
- LBX25-100
- Project
- Ishkōday Project
- Commodity
- gold
- Region
- canada_on
- Reported Region
- Ontario
- Ticker
- LME
Geometry
- Grade
- 0.929
- Grade Unit
- g/t
- Intercept
- 0.6 m
- From
- 284.4 m
- To
- 285 m
- Hole Depth
- 300 m
Classification
- Deposit Type
- orogenic
- Program
- resource
- Sample Type
- drill
- Group ID
- LBX25-100:284.4-285.0
- Mining Method
- open_pit
Location
- Easting
- 446494
- Northing
- 5513229
- Elevation
- 322.4 m
- Azimuth
- 130 °
- Dip
- -50 °
- Loc. Confidence
- high
QA/QC
- Laboratory
- ALS Global Analytical Lab
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates, check_assays
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-03T00:00:00.000Z
Reasoning: This narrow intercept shows a weak gold grade for open pit orogenic gold, but its limited width reduces its overall materiality.
Positive factors
- qaqc_disclosed
- qp_signed
Negative factors
- apparent_width_only
- no_true_width_reported
- narrow_intercept
Evidence · table
“0.929”
Context: 0.60
Tags used in scoring
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: The drill holes were designed to support targeted infill drilling and improve geological confidence.
Evidence · text
“Drill holes LBX25-097 and LBX25-100 were designed to support targeted infill drilling”
Rejected tags
Rejected tags — excluded from scoring because their label or evidence could not be verified.
Apparent Width OnlyRejected · negative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Reason: The document explicitly states that 'The true widths of the mineralized zones are not known at this time'.
Evidence · text
“The true widths of the mineralized zones are not known at this time”
QA/QC DisclosedRejected · positive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Reason: The release includes a detailed 'Sampling and QA/QC Protocols' section, mentioning external standards, blanks, duplicates, and a certified lab.
Evidence · text
“LAURION employs an industry standard system of external standards, blanks and duplicates for all of its sampling, in addition to the QA/QC protocol employed by the laboratory.”
LBX25-097Ishkōday Project · silverGrade: 1.45Grade Unit: g/tIntercept: 6.5 mView all detailsHide details
Identity
- Hole ID
- LBX25-097
- Project
- Ishkōday Project
- Commodity
- silver
- Region
- canada_on
- Reported Region
- Ontario
- Ticker
- LME
Geometry
- Grade
- 1.45
- Grade Unit
- g/t
- Intercept
- 6.5 m
- From
- 34.5 m
- To
- 41 m
Classification
- Deposit Type
- orogenic
- Sample Type
- drill
- Group ID
- LBX25-097:34.5-41
- Mining Method
- open_pit
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-03T00:00:00.000Z
Reasoning: Expanded from assay table. 1.45 g/t silver is below against the default band [500, 200, 100, 30] g/t. Grade×width 9.4 g/t·m is below.
Negative factors
- 1.45 g/t silver is below the weak threshold (30 g/t) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“1.45”
Context: LBX25-097
LBX25-097Ishkōday Project · copperGrade: 0.01Grade Unit: %Intercept: 6.5 mView all detailsHide details
Identity
- Hole ID
- LBX25-097
- Project
- Ishkōday Project
- Commodity
- copper
- Region
- canada_on
- Reported Region
- Ontario
- Ticker
- LME
Geometry
- Grade
- 0.01
- Grade Unit
- %
- Intercept
- 6.5 m
- From
- 34.5 m
- To
- 41 m
Classification
- Deposit Type
- orogenic
- Sample Type
- drill
- Group ID
- LBX25-097:34.5-41
- Mining Method
- open_pit
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-03T00:00:00.000Z
Reasoning: Expanded from assay table. 0.01 % copper is below against the default band [2.5, 1, 0.5, 0.25] %. Grade×width 0.1 %·m is below.
Negative factors
- 0.01 % copper is below the weak threshold (0.25 %) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.01”
Context: LBX25-097
LBX25-097Ishkōday Project · zincGrade: 0.26Grade Unit: %Intercept: 6.5 mView all detailsHide details
Identity
- Hole ID
- LBX25-097
- Project
- Ishkōday Project
- Commodity
- zinc
- Region
- canada_on
- Reported Region
- Ontario
- Ticker
- LME
Geometry
- Grade
- 0.26
- Grade Unit
- %
- Intercept
- 6.5 m
- From
- 34.5 m
- To
- 41 m
Classification
- Deposit Type
- orogenic
- Sample Type
- drill
- Group ID
- LBX25-097:34.5-41
- Mining Method
- open_pit
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-03T00:00:00.000Z
Reasoning: Expanded from assay table. 0.26 % zinc is below against the default band [18, 10, 5, 2] %. Grade×width 1.7 %·m is below.
Negative factors
- 0.26 % zinc is below the weak threshold (2 %) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.26”
Context: LBX25-097
includingIshkōday Project · goldGrade: 0.037Grade Unit: g/tIntercept: 1 mView all detailsHide details
Identity
- Hole ID
- including
- Project
- Ishkōday Project
- Commodity
- gold
- Region
- canada_on
- Reported Region
- Ontario
- Ticker
- LME
Geometry
- Grade
- 0.037
- Grade Unit
- g/t
- Intercept
- 1 m
- From
- 34.5 m
- To
- 35.5 m
Classification
- Deposit Type
- orogenic
- Sample Type
- drill
- Group ID
- including:34.5-35.5
- Mining Method
- open_pit
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-03T00:00:00.000Z
Reasoning: Expanded from assay table. 0.037 g/t gold is below against the open_pit mining band [5, 2, 1, 0.3] g/t. Grade×width 0.0 g/t·m is below.
Negative factors
- 0.037 g/t gold is below the weak threshold (0.3 g/t) on the open_pit mining band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.037”
Context: including
includingIshkōday Project · silverGrade: 3.3Grade Unit: g/tIntercept: 1 mView all detailsHide details
Identity
- Hole ID
- including
- Project
- Ishkōday Project
- Commodity
- silver
- Region
- canada_on
- Reported Region
- Ontario
- Ticker
- LME
Geometry
- Grade
- 3.3
- Grade Unit
- g/t
- Intercept
- 1 m
- From
- 34.5 m
- To
- 35.5 m
Classification
- Deposit Type
- orogenic
- Sample Type
- drill
- Group ID
- including:34.5-35.5
- Mining Method
- open_pit
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-03T00:00:00.000Z
Reasoning: Expanded from assay table. 3.3 g/t silver is below against the default band [500, 200, 100, 30] g/t. Grade×width 3.3 g/t·m is below.
Negative factors
- 3.3 g/t silver is below the weak threshold (30 g/t) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“3.30”
Context: including
includingIshkōday Project · copperGrade: 0.02Grade Unit: %Intercept: 1 mView all detailsHide details
Identity
- Hole ID
- including
- Project
- Ishkōday Project
- Commodity
- copper
- Region
- canada_on
- Reported Region
- Ontario
- Ticker
- LME
Geometry
- Grade
- 0.02
- Grade Unit
- %
- Intercept
- 1 m
- From
- 34.5 m
- To
- 35.5 m
Classification
- Deposit Type
- orogenic
- Sample Type
- drill
- Group ID
- including:34.5-35.5
- Mining Method
- open_pit
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-03T00:00:00.000Z
Reasoning: Expanded from assay table. 0.02 % copper is below against the default band [2.5, 1, 0.5, 0.25] %. Grade×width 0.0 %·m is below.
Negative factors
- 0.02 % copper is below the weak threshold (0.25 %) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.02”
Context: including
includingIshkōday Project · zincGrade: 0.76Grade Unit: %Intercept: 1 mView all detailsHide details
Identity
- Hole ID
- including
- Project
- Ishkōday Project
- Commodity
- zinc
- Region
- canada_on
- Reported Region
- Ontario
- Ticker
- LME
Geometry
- Grade
- 0.76
- Grade Unit
- %
- Intercept
- 1 m
- From
- 34.5 m
- To
- 35.5 m
Classification
- Deposit Type
- orogenic
- Sample Type
- drill
- Group ID
- including:34.5-35.5
- Mining Method
- open_pit
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-03T00:00:00.000Z
Reasoning: Expanded from assay table. 0.76 % zinc is below against the default band [18, 10, 5, 2] %. Grade×width 0.8 %·m is below.
Negative factors
- 0.76 % zinc is below the weak threshold (2 %) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.76”
Context: including
LBX25-097Ishkōday Project · silverGrade: 0.8Grade Unit: g/tIntercept: 0.65 mView all detailsHide details
Identity
- Hole ID
- LBX25-097
- Project
- Ishkōday Project
- Commodity
- silver
- Region
- canada_on
- Reported Region
- Ontario
- Ticker
- LME
Geometry
- Grade
- 0.8
- Grade Unit
- g/t
- Intercept
- 0.65 m
- From
- 52.6 m
- To
- 53.25 m
Classification
- Deposit Type
- orogenic
- Sample Type
- drill
- Group ID
- LBX25-097:52.6-53.25
- Mining Method
- open_pit
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-03T00:00:00.000Z
Reasoning: Expanded from assay table. 0.8 g/t silver is below against the default band [500, 200, 100, 30] g/t. Grade×width 0.5 g/t·m is below.
Negative factors
- 0.8 g/t silver is below the weak threshold (30 g/t) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.80”
Context: LBX25-097
LBX25-097Ishkōday Project · zincGrade: 0.02Grade Unit: %Intercept: 0.65 mView all detailsHide details
Identity
- Hole ID
- LBX25-097
- Project
- Ishkōday Project
- Commodity
- zinc
- Region
- canada_on
- Reported Region
- Ontario
- Ticker
- LME
Geometry
- Grade
- 0.02
- Grade Unit
- %
- Intercept
- 0.65 m
- From
- 52.6 m
- To
- 53.25 m
Classification
- Deposit Type
- orogenic
- Sample Type
- drill
- Group ID
- LBX25-097:52.6-53.25
- Mining Method
- open_pit
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-03T00:00:00.000Z
Reasoning: Expanded from assay table. 0.02 % zinc is below against the default band [18, 10, 5, 2] %. Grade×width 0.0 %·m is below.
Negative factors
- 0.02 % zinc is below the weak threshold (2 %) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.02”
Context: LBX25-097
LBX25-097Ishkōday Project · silverGrade: 2.8Grade Unit: g/tIntercept: 0.5 mView all detailsHide details
Identity
- Hole ID
- LBX25-097
- Project
- Ishkōday Project
- Commodity
- silver
- Region
- canada_on
- Reported Region
- Ontario
- Ticker
- LME
Geometry
- Grade
- 2.8
- Grade Unit
- g/t
- Intercept
- 0.5 m
- From
- 55 m
- To
- 55.5 m
Classification
- Deposit Type
- orogenic
- Sample Type
- drill
- Group ID
- LBX25-097:55-55.5
- Mining Method
- open_pit
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-03T00:00:00.000Z
Reasoning: Expanded from assay table. 2.8 g/t silver is below against the default band [500, 200, 100, 30] g/t. Grade×width 1.4 g/t·m is below.
Negative factors
- 2.8 g/t silver is below the weak threshold (30 g/t) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“2.80”
Context: LBX25-097
LBX25-097Ishkōday Project · copperGrade: 0.04Grade Unit: %Intercept: 0.5 mView all detailsHide details
Identity
- Hole ID
- LBX25-097
- Project
- Ishkōday Project
- Commodity
- copper
- Region
- canada_on
- Reported Region
- Ontario
- Ticker
- LME
Geometry
- Grade
- 0.04
- Grade Unit
- %
- Intercept
- 0.5 m
- From
- 55 m
- To
- 55.5 m
Classification
- Deposit Type
- orogenic
- Sample Type
- drill
- Group ID
- LBX25-097:55-55.5
- Mining Method
- open_pit
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-03T00:00:00.000Z
Reasoning: Expanded from assay table. 0.04 % copper is below against the default band [2.5, 1, 0.5, 0.25] %. Grade×width 0.0 %·m is below.
Negative factors
- 0.04 % copper is below the weak threshold (0.25 %) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.04”
Context: LBX25-097
LBX25-097Ishkōday Project · zincGrade: 0.97Grade Unit: %Intercept: 0.5 mView all detailsHide details
Identity
- Hole ID
- LBX25-097
- Project
- Ishkōday Project
- Commodity
- zinc
- Region
- canada_on
- Reported Region
- Ontario
- Ticker
- LME
Geometry
- Grade
- 0.97
- Grade Unit
- %
- Intercept
- 0.5 m
- From
- 55 m
- To
- 55.5 m
Classification
- Deposit Type
- orogenic
- Sample Type
- drill
- Group ID
- LBX25-097:55-55.5
- Mining Method
- open_pit
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-03T00:00:00.000Z
Reasoning: Expanded from assay table. 0.97 % zinc is below against the default band [18, 10, 5, 2] %. Grade×width 0.5 %·m is below.
Negative factors
- 0.97 % zinc is below the weak threshold (2 %) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.97”
Context: LBX25-097
LBX25-097Ishkōday Project · silverGrade: 1.5Grade Unit: g/tIntercept: 0.7 mView all detailsHide details
Identity
- Hole ID
- LBX25-097
- Project
- Ishkōday Project
- Commodity
- silver
- Region
- canada_on
- Reported Region
- Ontario
- Ticker
- LME
Geometry
- Grade
- 1.5
- Grade Unit
- g/t
- Intercept
- 0.7 m
- From
- 64.5 m
- To
- 65.2 m
Classification
- Deposit Type
- orogenic
- Sample Type
- drill
- Group ID
- LBX25-097:64.5-65.2
- Mining Method
- open_pit
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-03T00:00:00.000Z
Reasoning: Expanded from assay table. 1.5 g/t silver is below against the default band [500, 200, 100, 30] g/t. Grade×width 1.0 g/t·m is below.
Negative factors
- 1.5 g/t silver is below the weak threshold (30 g/t) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“1.50”
Context: LBX25-097
LBX25-097Ishkōday Project · copperGrade: 0.05Grade Unit: %Intercept: 0.7 mView all detailsHide details
Identity
- Hole ID
- LBX25-097
- Project
- Ishkōday Project
- Commodity
- copper
- Region
- canada_on
- Reported Region
- Ontario
- Ticker
- LME
Geometry
- Grade
- 0.05
- Grade Unit
- %
- Intercept
- 0.7 m
- From
- 64.5 m
- To
- 65.2 m
Classification
- Deposit Type
- orogenic
- Sample Type
- drill
- Group ID
- LBX25-097:64.5-65.2
- Mining Method
- open_pit
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-03T00:00:00.000Z
Reasoning: Expanded from assay table. 0.05 % copper is below against the default band [2.5, 1, 0.5, 0.25] %. Grade×width 0.0 %·m is below.
Negative factors
- 0.05 % copper is below the weak threshold (0.25 %) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.05”
Context: LBX25-097
LBX25-097Ishkōday Project · zincGrade: 0.47Grade Unit: %Intercept: 0.7 mView all detailsHide details
Identity
- Hole ID
- LBX25-097
- Project
- Ishkōday Project
- Commodity
- zinc
- Region
- canada_on
- Reported Region
- Ontario
- Ticker
- LME
Geometry
- Grade
- 0.47
- Grade Unit
- %
- Intercept
- 0.7 m
- From
- 64.5 m
- To
- 65.2 m
Classification
- Deposit Type
- orogenic
- Sample Type
- drill
- Group ID
- LBX25-097:64.5-65.2
- Mining Method
- open_pit
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-03T00:00:00.000Z
Reasoning: Expanded from assay table. 0.47 % zinc is below against the default band [18, 10, 5, 2] %. Grade×width 0.3 %·m is below.
Negative factors
- 0.47 % zinc is below the weak threshold (2 %) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.47”
Context: LBX25-097
LBX25-097Ishkōday Project · silverGrade: 42.1Grade Unit: g/tIntercept: 0.6 mView all detailsHide details
Identity
- Hole ID
- LBX25-097
- Project
- Ishkōday Project
- Commodity
- silver
- Region
- canada_on
- Reported Region
- Ontario
- Ticker
- LME
Geometry
- Grade
- 42.1
- Grade Unit
- g/t
- Intercept
- 0.6 m
- From
- 66.8 m
- To
- 67.4 m
Classification
- Deposit Type
- orogenic
- Sample Type
- drill
- Group ID
- LBX25-097:66.8-67.4
- Mining Method
- open_pit
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-03T00:00:00.000Z
Reasoning: Expanded from assay table. 42.1 g/t silver is weak against the default band [500, 200, 100, 30] g/t. Grade×width 25.3 g/t·m is below (grade alone is weak; the better of the two is used).
Negative factors
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“42.10”
Context: LBX25-097
LBX25-097Ishkōday Project · zincGrade: 0.04Grade Unit: %Intercept: 0.6 mView all detailsHide details
Identity
- Hole ID
- LBX25-097
- Project
- Ishkōday Project
- Commodity
- zinc
- Region
- canada_on
- Reported Region
- Ontario
- Ticker
- LME
Geometry
- Grade
- 0.04
- Grade Unit
- %
- Intercept
- 0.6 m
- From
- 66.8 m
- To
- 67.4 m
Classification
- Deposit Type
- orogenic
- Sample Type
- drill
- Group ID
- LBX25-097:66.8-67.4
- Mining Method
- open_pit
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-03T00:00:00.000Z
Reasoning: Expanded from assay table. 0.04 % zinc is below against the default band [18, 10, 5, 2] %. Grade×width 0.0 %·m is below.
Negative factors
- 0.04 % zinc is below the weak threshold (2 %) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.04”
Context: LBX25-097
LBX25-097Ishkōday Project · silverGrade: 2.1Grade Unit: g/tIntercept: 0.5 mView all detailsHide details
Identity
- Hole ID
- LBX25-097
- Project
- Ishkōday Project
- Commodity
- silver
- Region
- canada_on
- Reported Region
- Ontario
- Ticker
- LME
Geometry
- Grade
- 2.1
- Grade Unit
- g/t
- Intercept
- 0.5 m
- From
- 76.5 m
- To
- 77 m
Classification
- Deposit Type
- orogenic
- Sample Type
- drill
- Group ID
- LBX25-097:76.5-77
- Mining Method
- open_pit
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-03T00:00:00.000Z
Reasoning: Expanded from assay table. 2.1 g/t silver is below against the default band [500, 200, 100, 30] g/t. Grade×width 1.1 g/t·m is below.
Negative factors
- 2.1 g/t silver is below the weak threshold (30 g/t) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“2.10”
Context: LBX25-097
LBX25-097Ishkōday Project · copperGrade: 0.03Grade Unit: %Intercept: 0.5 mView all detailsHide details
Identity
- Hole ID
- LBX25-097
- Project
- Ishkōday Project
- Commodity
- copper
- Region
- canada_on
- Reported Region
- Ontario
- Ticker
- LME
Geometry
- Grade
- 0.03
- Grade Unit
- %
- Intercept
- 0.5 m
- From
- 76.5 m
- To
- 77 m
Classification
- Deposit Type
- orogenic
- Sample Type
- drill
- Group ID
- LBX25-097:76.5-77
- Mining Method
- open_pit
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-03T00:00:00.000Z
Reasoning: Expanded from assay table. 0.03 % copper is below against the default band [2.5, 1, 0.5, 0.25] %. Grade×width 0.0 %·m is below.
Negative factors
- 0.03 % copper is below the weak threshold (0.25 %) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.03”
Context: LBX25-097
LBX25-097Ishkōday Project · zincGrade: 0.4Grade Unit: %Intercept: 0.5 mView all detailsHide details
Identity
- Hole ID
- LBX25-097
- Project
- Ishkōday Project
- Commodity
- zinc
- Region
- canada_on
- Reported Region
- Ontario
- Ticker
- LME
Geometry
- Grade
- 0.4
- Grade Unit
- %
- Intercept
- 0.5 m
- From
- 76.5 m
- To
- 77 m
Classification
- Deposit Type
- orogenic
- Sample Type
- drill
- Group ID
- LBX25-097:76.5-77
- Mining Method
- open_pit
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-03T00:00:00.000Z
Reasoning: Expanded from assay table. 0.4 % zinc is below against the default band [18, 10, 5, 2] %. Grade×width 0.2 %·m is below.
Negative factors
- 0.4 % zinc is below the weak threshold (2 %) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.40”
Context: LBX25-097
LBX25-097Ishkōday Project · silverGrade: 2.87Grade Unit: g/tIntercept: 15.5 mView all detailsHide details
Identity
- Hole ID
- LBX25-097
- Project
- Ishkōday Project
- Commodity
- silver
- Region
- canada_on
- Reported Region
- Ontario
- Ticker
- LME
Geometry
- Grade
- 2.87
- Grade Unit
- g/t
- Intercept
- 15.5 m
- From
- 135.5 m
- To
- 151 m
Classification
- Deposit Type
- orogenic
- Sample Type
- drill
- Group ID
- LBX25-097:135.5-151
- Mining Method
- open_pit
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-03T00:00:00.000Z
Reasoning: Expanded from assay table. 2.87 g/t silver is below against the default band [500, 200, 100, 30] g/t. Grade×width 44.5 g/t·m is below.
Negative factors
- 2.87 g/t silver is below the weak threshold (30 g/t) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“2.87”
Context: LBX25-097
LBX25-097Ishkōday Project · copperGrade: 0.03Grade Unit: %Intercept: 15.5 mView all detailsHide details
Identity
- Hole ID
- LBX25-097
- Project
- Ishkōday Project
- Commodity
- copper
- Region
- canada_on
- Reported Region
- Ontario
- Ticker
- LME
Geometry
- Grade
- 0.03
- Grade Unit
- %
- Intercept
- 15.5 m
- From
- 135.5 m
- To
- 151 m
Classification
- Deposit Type
- orogenic
- Sample Type
- drill
- Group ID
- LBX25-097:135.5-151
- Mining Method
- open_pit
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-03T00:00:00.000Z
Reasoning: Expanded from assay table. 0.03 % copper is below against the default band [2.5, 1, 0.5, 0.25] %. Grade×width 0.5 %·m is below.
Negative factors
- 0.03 % copper is below the weak threshold (0.25 %) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.03”
Context: LBX25-097
LBX25-097Ishkōday Project · zincGrade: 0.48Grade Unit: %Intercept: 15.5 mView all detailsHide details
Identity
- Hole ID
- LBX25-097
- Project
- Ishkōday Project
- Commodity
- zinc
- Region
- canada_on
- Reported Region
- Ontario
- Ticker
- LME
Geometry
- Grade
- 0.48
- Grade Unit
- %
- Intercept
- 15.5 m
- From
- 135.5 m
- To
- 151 m
Classification
- Deposit Type
- orogenic
- Sample Type
- drill
- Group ID
- LBX25-097:135.5-151
- Mining Method
- open_pit
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-03T00:00:00.000Z
Reasoning: Expanded from assay table. 0.48 % zinc is below against the default band [18, 10, 5, 2] %. Grade×width 7.4 %·m is below.
Negative factors
- 0.48 % zinc is below the weak threshold (2 %) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.48”
Context: LBX25-097
includingIshkōday Project · goldGrade: 0.732Grade Unit: g/tIntercept: 7.7 mView all detailsHide details
Identity
- Hole ID
- including
- Project
- Ishkōday Project
- Commodity
- gold
- Region
- canada_on
- Reported Region
- Ontario
- Ticker
- LME
Geometry
- Grade
- 0.732
- Grade Unit
- g/t
- Intercept
- 7.7 m
- From
- 135.5 m
- To
- 143.2 m
Classification
- Deposit Type
- orogenic
- Sample Type
- drill
- Group ID
- including:135.5-143.2
- Mining Method
- open_pit
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-03T00:00:00.000Z
Reasoning: Expanded from assay table. 0.732 g/t gold is weak against the open_pit mining band [5, 2, 1, 0.3] g/t. Grade×width 5.6 g/t·m is below (grade alone is weak; the better of the two is used).
Negative factors
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.732”
Context: including
includingIshkōday Project · silverGrade: 4.76Grade Unit: g/tIntercept: 7.7 mView all detailsHide details
Identity
- Hole ID
- including
- Project
- Ishkōday Project
- Commodity
- silver
- Region
- canada_on
- Reported Region
- Ontario
- Ticker
- LME
Geometry
- Grade
- 4.76
- Grade Unit
- g/t
- Intercept
- 7.7 m
- From
- 135.5 m
- To
- 143.2 m
Classification
- Deposit Type
- orogenic
- Sample Type
- drill
- Group ID
- including:135.5-143.2
- Mining Method
- open_pit
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-03T00:00:00.000Z
Reasoning: Expanded from assay table. 4.76 g/t silver is below against the default band [500, 200, 100, 30] g/t. Grade×width 36.7 g/t·m is below.
Negative factors
- 4.76 g/t silver is below the weak threshold (30 g/t) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“4.76”
Context: including
includingIshkōday Project · copperGrade: 0.04Grade Unit: %Intercept: 7.7 mView all detailsHide details
Identity
- Hole ID
- including
- Project
- Ishkōday Project
- Commodity
- copper
- Region
- canada_on
- Reported Region
- Ontario
- Ticker
- LME
Geometry
- Grade
- 0.04
- Grade Unit
- %
- Intercept
- 7.7 m
- From
- 135.5 m
- To
- 143.2 m
Classification
- Deposit Type
- orogenic
- Sample Type
- drill
- Group ID
- including:135.5-143.2
- Mining Method
- open_pit
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-03T00:00:00.000Z
Reasoning: Expanded from assay table. 0.04 % copper is below against the default band [2.5, 1, 0.5, 0.25] %. Grade×width 0.3 %·m is below.
Negative factors
- 0.04 % copper is below the weak threshold (0.25 %) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.04”
Context: including
includingIshkōday Project · zincGrade: 0.78Grade Unit: %Intercept: 7.7 mView all detailsHide details
Identity
- Hole ID
- including
- Project
- Ishkōday Project
- Commodity
- zinc
- Region
- canada_on
- Reported Region
- Ontario
- Ticker
- LME
Geometry
- Grade
- 0.78
- Grade Unit
- %
- Intercept
- 7.7 m
- From
- 135.5 m
- To
- 143.2 m
Classification
- Deposit Type
- orogenic
- Sample Type
- drill
- Group ID
- including:135.5-143.2
- Mining Method
- open_pit
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-03T00:00:00.000Z
Reasoning: Expanded from assay table. 0.78 % zinc is below against the default band [18, 10, 5, 2] %. Grade×width 6.0 %·m is below.
Negative factors
- 0.78 % zinc is below the weak threshold (2 %) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.78”
Context: including
includingIshkōday Project · goldGrade: 4.35Grade Unit: g/tIntercept: 0.9 mView all detailsHide details
Identity
- Hole ID
- including
- Project
- Ishkōday Project
- Commodity
- gold
- Region
- canada_on
- Reported Region
- Ontario
- Ticker
- LME
Geometry
- Grade
- 4.35
- Grade Unit
- g/t
- Intercept
- 0.9 m
- From
- 135.5 m
- To
- 136.4 m
Classification
- Deposit Type
- orogenic
- Sample Type
- drill
- Group ID
- including:135.5-136.4
- Mining Method
- open_pit
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-03T00:00:00.000Z
Reasoning: Expanded from assay table. 4.35 g/t gold is strong against the open_pit mining band [5, 2, 1, 0.3] g/t. Grade×width 3.9 g/t·m is below (grade alone is strong; the better of the two is used).
Positive factors
- 4.35 g/t gold is strong on the open_pit mining band.
Negative factors
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“4.350”
Context: including
includingIshkōday Project · silverGrade: 21.2Grade Unit: g/tIntercept: 0.9 mView all detailsHide details
Identity
- Hole ID
- including
- Project
- Ishkōday Project
- Commodity
- silver
- Region
- canada_on
- Reported Region
- Ontario
- Ticker
- LME
Geometry
- Grade
- 21.2
- Grade Unit
- g/t
- Intercept
- 0.9 m
- From
- 135.5 m
- To
- 136.4 m
Classification
- Deposit Type
- orogenic
- Sample Type
- drill
- Group ID
- including:135.5-136.4
- Mining Method
- open_pit
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-03T00:00:00.000Z
Reasoning: Expanded from assay table. 21.2 g/t silver is below against the default band [500, 200, 100, 30] g/t. Grade×width 19.1 g/t·m is below.
Negative factors
- 21.2 g/t silver is below the weak threshold (30 g/t) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“21.20”
Context: including
includingIshkōday Project · copperGrade: 0.11Grade Unit: %Intercept: 0.9 mView all detailsHide details
Identity
- Hole ID
- including
- Project
- Ishkōday Project
- Commodity
- copper
- Region
- canada_on
- Reported Region
- Ontario
- Ticker
- LME
Geometry
- Grade
- 0.11
- Grade Unit
- %
- Intercept
- 0.9 m
- From
- 135.5 m
- To
- 136.4 m
Classification
- Deposit Type
- orogenic
- Sample Type
- drill
- Group ID
- including:135.5-136.4
- Mining Method
- open_pit
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-03T00:00:00.000Z
Reasoning: Expanded from assay table. 0.11 % copper is below against the default band [2.5, 1, 0.5, 0.25] %. Grade×width 0.1 %·m is below.
Negative factors
- 0.11 % copper is below the weak threshold (0.25 %) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.11”
Context: including
includingIshkōday Project · zincGrade: 4.22Grade Unit: %Intercept: 0.9 mView all detailsHide details
Identity
- Hole ID
- including
- Project
- Ishkōday Project
- Commodity
- zinc
- Region
- canada_on
- Reported Region
- Ontario
- Ticker
- LME
Geometry
- Grade
- 4.22
- Grade Unit
- %
- Intercept
- 0.9 m
- From
- 135.5 m
- To
- 136.4 m
Classification
- Deposit Type
- orogenic
- Sample Type
- drill
- Group ID
- including:135.5-136.4
- Mining Method
- open_pit
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-03T00:00:00.000Z
Reasoning: Expanded from assay table. 4.22 % zinc is weak against the default band [18, 10, 5, 2] %. Grade×width 3.8 %·m is below (grade alone is weak; the better of the two is used).
Negative factors
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“4.22”
Context: including
includingIshkōday Project · goldGrade: 1.445Grade Unit: g/tIntercept: 1 mView all detailsHide details
Identity
- Hole ID
- including
- Project
- Ishkōday Project
- Commodity
- gold
- Region
- canada_on
- Reported Region
- Ontario
- Ticker
- LME
Geometry
- Grade
- 1.445
- Grade Unit
- g/t
- Intercept
- 1 m
- From
- 148.9 m
- To
- 149.9 m
Classification
- Deposit Type
- orogenic
- Sample Type
- drill
- Group ID
- including:148.9-149.9
- Mining Method
- open_pit
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-03T00:00:00.000Z
Reasoning: Expanded from assay table. 1.445 g/t gold is moderate against the open_pit mining band [5, 2, 1, 0.3] g/t. Grade×width 1.4 g/t·m is below (grade alone is moderate; the better of the two is used).
Negative factors
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“1.445”
Context: including
includingIshkōday Project · silverGrade: 0.6Grade Unit: g/tIntercept: 1 mView all detailsHide details
Identity
- Hole ID
- including
- Project
- Ishkōday Project
- Commodity
- silver
- Region
- canada_on
- Reported Region
- Ontario
- Ticker
- LME
Geometry
- Grade
- 0.6
- Grade Unit
- g/t
- Intercept
- 1 m
- From
- 148.9 m
- To
- 149.9 m
Classification
- Deposit Type
- orogenic
- Sample Type
- drill
- Group ID
- including:148.9-149.9
- Mining Method
- open_pit
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-03T00:00:00.000Z
Reasoning: Expanded from assay table. 0.6 g/t silver is below against the default band [500, 200, 100, 30] g/t. Grade×width 0.6 g/t·m is below.
Negative factors
- 0.6 g/t silver is below the weak threshold (30 g/t) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.60”
Context: including
includingIshkōday Project · zincGrade: 0.03Grade Unit: %Intercept: 1 mView all detailsHide details
Identity
- Hole ID
- including
- Project
- Ishkōday Project
- Commodity
- zinc
- Region
- canada_on
- Reported Region
- Ontario
- Ticker
- LME
Geometry
- Grade
- 0.03
- Grade Unit
- %
- Intercept
- 1 m
- From
- 148.9 m
- To
- 149.9 m
Classification
- Deposit Type
- orogenic
- Sample Type
- drill
- Group ID
- including:148.9-149.9
- Mining Method
- open_pit
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-03T00:00:00.000Z
Reasoning: Expanded from assay table. 0.03 % zinc is below against the default band [18, 10, 5, 2] %. Grade×width 0.0 %·m is below.
Negative factors
- 0.03 % zinc is below the weak threshold (2 %) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.03”
Context: including
LBX25-097Ishkōday Project · silverGrade: 3.3Grade Unit: g/tIntercept: 0.5 mView all detailsHide details
Identity
- Hole ID
- LBX25-097
- Project
- Ishkōday Project
- Commodity
- silver
- Region
- canada_on
- Reported Region
- Ontario
- Ticker
- LME
Geometry
- Grade
- 3.3
- Grade Unit
- g/t
- Intercept
- 0.5 m
- From
- 158.75 m
- To
- 159.25 m
Classification
- Deposit Type
- orogenic
- Sample Type
- drill
- Group ID
- LBX25-097:158.75-159.25
- Mining Method
- open_pit
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-03T00:00:00.000Z
Reasoning: Expanded from assay table. 3.3 g/t silver is below against the default band [500, 200, 100, 30] g/t. Grade×width 1.6 g/t·m is below.
Negative factors
- 3.3 g/t silver is below the weak threshold (30 g/t) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“3.30”
Context: LBX25-097
LBX25-097Ishkōday Project · copperGrade: 0.08Grade Unit: %Intercept: 0.5 mView all detailsHide details
Identity
- Hole ID
- LBX25-097
- Project
- Ishkōday Project
- Commodity
- copper
- Region
- canada_on
- Reported Region
- Ontario
- Ticker
- LME
Geometry
- Grade
- 0.08
- Grade Unit
- %
- Intercept
- 0.5 m
- From
- 158.75 m
- To
- 159.25 m
Classification
- Deposit Type
- orogenic
- Sample Type
- drill
- Group ID
- LBX25-097:158.75-159.25
- Mining Method
- open_pit
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-03T00:00:00.000Z
Reasoning: Expanded from assay table. 0.08 % copper is below against the default band [2.5, 1, 0.5, 0.25] %. Grade×width 0.0 %·m is below.
Negative factors
- 0.08 % copper is below the weak threshold (0.25 %) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.08”
Context: LBX25-097
LBX25-097Ishkōday Project · zincGrade: 0.96Grade Unit: %Intercept: 0.5 mView all detailsHide details
Identity
- Hole ID
- LBX25-097
- Project
- Ishkōday Project
- Commodity
- zinc
- Region
- canada_on
- Reported Region
- Ontario
- Ticker
- LME
Geometry
- Grade
- 0.96
- Grade Unit
- %
- Intercept
- 0.5 m
- From
- 158.75 m
- To
- 159.25 m
Classification
- Deposit Type
- orogenic
- Sample Type
- drill
- Group ID
- LBX25-097:158.75-159.25
- Mining Method
- open_pit
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-03T00:00:00.000Z
Reasoning: Expanded from assay table. 0.96 % zinc is below against the default band [18, 10, 5, 2] %. Grade×width 0.5 %·m is below.
Negative factors
- 0.96 % zinc is below the weak threshold (2 %) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.96”
Context: LBX25-097
LBX25-097Ishkōday Project · silverGrade: 2.2Grade Unit: g/tIntercept: 0.5 mView all detailsHide details
Identity
- Hole ID
- LBX25-097
- Project
- Ishkōday Project
- Commodity
- silver
- Region
- canada_on
- Reported Region
- Ontario
- Ticker
- LME
Geometry
- Grade
- 2.2
- Grade Unit
- g/t
- Intercept
- 0.5 m
- From
- 170.9 m
- To
- 171.4 m
Classification
- Deposit Type
- orogenic
- Sample Type
- drill
- Group ID
- LBX25-097:170.9-171.4
- Mining Method
- open_pit
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-03T00:00:00.000Z
Reasoning: Expanded from assay table. 2.2 g/t silver is below against the default band [500, 200, 100, 30] g/t. Grade×width 1.1 g/t·m is below.
Negative factors
- 2.2 g/t silver is below the weak threshold (30 g/t) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“2.20”
Context: LBX25-097
LBX25-097Ishkōday Project · copperGrade: 0.05Grade Unit: %Intercept: 0.5 mView all detailsHide details
Identity
- Hole ID
- LBX25-097
- Project
- Ishkōday Project
- Commodity
- copper
- Region
- canada_on
- Reported Region
- Ontario
- Ticker
- LME
Geometry
- Grade
- 0.05
- Grade Unit
- %
- Intercept
- 0.5 m
- From
- 170.9 m
- To
- 171.4 m
Classification
- Deposit Type
- orogenic
- Sample Type
- drill
- Group ID
- LBX25-097:170.9-171.4
- Mining Method
- open_pit
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-03T00:00:00.000Z
Reasoning: Expanded from assay table. 0.05 % copper is below against the default band [2.5, 1, 0.5, 0.25] %. Grade×width 0.0 %·m is below.
Negative factors
- 0.05 % copper is below the weak threshold (0.25 %) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.05”
Context: LBX25-097
LBX25-097Ishkōday Project · zincGrade: 0.64Grade Unit: %Intercept: 0.5 mView all detailsHide details
Identity
- Hole ID
- LBX25-097
- Project
- Ishkōday Project
- Commodity
- zinc
- Region
- canada_on
- Reported Region
- Ontario
- Ticker
- LME
Geometry
- Grade
- 0.64
- Grade Unit
- %
- Intercept
- 0.5 m
- From
- 170.9 m
- To
- 171.4 m
Classification
- Deposit Type
- orogenic
- Sample Type
- drill
- Group ID
- LBX25-097:170.9-171.4
- Mining Method
- open_pit
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-03T00:00:00.000Z
Reasoning: Expanded from assay table. 0.64 % zinc is below against the default band [18, 10, 5, 2] %. Grade×width 0.3 %·m is below.
Negative factors
- 0.64 % zinc is below the weak threshold (2 %) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.64”
Context: LBX25-097
LBX25-097Ishkōday Project · silverGrade: 0.6Grade Unit: g/tIntercept: 0.6 mView all detailsHide details
Identity
- Hole ID
- LBX25-097
- Project
- Ishkōday Project
- Commodity
- silver
- Region
- canada_on
- Reported Region
- Ontario
- Ticker
- LME
Geometry
- Grade
- 0.6
- Grade Unit
- g/t
- Intercept
- 0.6 m
- From
- 172.4 m
- To
- 173 m
Classification
- Deposit Type
- orogenic
- Sample Type
- drill
- Group ID
- LBX25-097:172.4-173
- Mining Method
- open_pit
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-03T00:00:00.000Z
Reasoning: Expanded from assay table. 0.6 g/t silver is below against the default band [500, 200, 100, 30] g/t. Grade×width 0.4 g/t·m is below.
Negative factors
- 0.6 g/t silver is below the weak threshold (30 g/t) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.60”
Context: LBX25-097
LBX25-097Ishkōday Project · zincGrade: 0.03Grade Unit: %Intercept: 0.6 mView all detailsHide details
Identity
- Hole ID
- LBX25-097
- Project
- Ishkōday Project
- Commodity
- zinc
- Region
- canada_on
- Reported Region
- Ontario
- Ticker
- LME
Geometry
- Grade
- 0.03
- Grade Unit
- %
- Intercept
- 0.6 m
- From
- 172.4 m
- To
- 173 m
Classification
- Deposit Type
- orogenic
- Sample Type
- drill
- Group ID
- LBX25-097:172.4-173
- Mining Method
- open_pit
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-03T00:00:00.000Z
Reasoning: Expanded from assay table. 0.03 % zinc is below against the default band [18, 10, 5, 2] %. Grade×width 0.0 %·m is below.
Negative factors
- 0.03 % zinc is below the weak threshold (2 %) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.03”
Context: LBX25-097
LBX25-100Ishkōday Project · silverGrade: 0.5Grade Unit: g/tIntercept: 0.5 mView all detailsHide details
Identity
- Hole ID
- LBX25-100
- Project
- Ishkōday Project
- Commodity
- silver
- Region
- canada_on
- Reported Region
- Ontario
- Ticker
- LME
Geometry
- Grade
- 0.5
- Grade Unit
- g/t
- Intercept
- 0.5 m
- From
- 22.8 m
- To
- 23.3 m
Classification
- Deposit Type
- orogenic
- Sample Type
- drill
- Group ID
- LBX25-100:22.8-23.3
- Mining Method
- open_pit
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-03T00:00:00.000Z
Reasoning: Expanded from assay table. 0.5 g/t silver is below against the default band [500, 200, 100, 30] g/t. Grade×width 0.3 g/t·m is below.
Negative factors
- 0.5 g/t silver is below the weak threshold (30 g/t) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.50”
Context: LBX25-100
LBX25-100Ishkōday Project · zincGrade: 0.02Grade Unit: %Intercept: 0.5 mView all detailsHide details
Identity
- Hole ID
- LBX25-100
- Project
- Ishkōday Project
- Commodity
- zinc
- Region
- canada_on
- Reported Region
- Ontario
- Ticker
- LME
Geometry
- Grade
- 0.02
- Grade Unit
- %
- Intercept
- 0.5 m
- From
- 22.8 m
- To
- 23.3 m
Classification
- Deposit Type
- orogenic
- Sample Type
- drill
- Group ID
- LBX25-100:22.8-23.3
- Mining Method
- open_pit
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-03T00:00:00.000Z
Reasoning: Expanded from assay table. 0.02 % zinc is below against the default band [18, 10, 5, 2] %. Grade×width 0.0 %·m is below.
Negative factors
- 0.02 % zinc is below the weak threshold (2 %) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.02”
Context: LBX25-100
LBX25-100Ishkōday Project · silverGrade: 0.25Grade Unit: g/tIntercept: 0.8 mView all detailsHide details
Identity
- Hole ID
- LBX25-100
- Project
- Ishkōday Project
- Commodity
- silver
- Region
- canada_on
- Reported Region
- Ontario
- Ticker
- LME
Geometry
- Grade
- 0.25
- Grade Unit
- g/t
- Intercept
- 0.8 m
- From
- 26.5 m
- To
- 27.3 m
Classification
- Deposit Type
- orogenic
- Sample Type
- drill
- Group ID
- LBX25-100:26.5-27.3
- Mining Method
- open_pit
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-03T00:00:00.000Z
Reasoning: Expanded from assay table. 0.25 g/t silver is below against the default band [500, 200, 100, 30] g/t. Grade×width 0.2 g/t·m is below.
Negative factors
- 0.25 g/t silver is below the weak threshold (30 g/t) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.25”
Context: LBX25-100
LBX25-100Ishkōday Project · zincGrade: 0.03Grade Unit: %Intercept: 0.8 mView all detailsHide details
Identity
- Hole ID
- LBX25-100
- Project
- Ishkōday Project
- Commodity
- zinc
- Region
- canada_on
- Reported Region
- Ontario
- Ticker
- LME
Geometry
- Grade
- 0.03
- Grade Unit
- %
- Intercept
- 0.8 m
- From
- 26.5 m
- To
- 27.3 m
Classification
- Deposit Type
- orogenic
- Sample Type
- drill
- Group ID
- LBX25-100:26.5-27.3
- Mining Method
- open_pit
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-03T00:00:00.000Z
Reasoning: Expanded from assay table. 0.03 % zinc is below against the default band [18, 10, 5, 2] %. Grade×width 0.0 %·m is below.
Negative factors
- 0.03 % zinc is below the weak threshold (2 %) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.03”
Context: LBX25-100
LBX25-100Ishkōday Project · silverGrade: 0.85Grade Unit: g/tIntercept: 9.8 mView all detailsHide details
Identity
- Hole ID
- LBX25-100
- Project
- Ishkōday Project
- Commodity
- silver
- Region
- canada_on
- Reported Region
- Ontario
- Ticker
- LME
Geometry
- Grade
- 0.85
- Grade Unit
- g/t
- Intercept
- 9.8 m
- From
- 39 m
- To
- 48.8 m
Classification
- Deposit Type
- orogenic
- Sample Type
- drill
- Group ID
- LBX25-100:39-48.8
- Mining Method
- open_pit
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-03T00:00:00.000Z
Reasoning: Expanded from assay table. 0.85 g/t silver is below against the default band [500, 200, 100, 30] g/t. Grade×width 8.3 g/t·m is below.
Negative factors
- 0.85 g/t silver is below the weak threshold (30 g/t) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.85”
Context: LBX25-100
LBX25-100Ishkōday Project · copperGrade: 0.02Grade Unit: %Intercept: 9.8 mView all detailsHide details
Identity
- Hole ID
- LBX25-100
- Project
- Ishkōday Project
- Commodity
- copper
- Region
- canada_on
- Reported Region
- Ontario
- Ticker
- LME
Geometry
- Grade
- 0.02
- Grade Unit
- %
- Intercept
- 9.8 m
- From
- 39 m
- To
- 48.8 m
Classification
- Deposit Type
- orogenic
- Sample Type
- drill
- Group ID
- LBX25-100:39-48.8
- Mining Method
- open_pit
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-03T00:00:00.000Z
Reasoning: Expanded from assay table. 0.02 % copper is below against the default band [2.5, 1, 0.5, 0.25] %. Grade×width 0.2 %·m is below.
Negative factors
- 0.02 % copper is below the weak threshold (0.25 %) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.02”
Context: LBX25-100
LBX25-100Ishkōday Project · zincGrade: 0.19Grade Unit: %Intercept: 9.8 mView all detailsHide details
Identity
- Hole ID
- LBX25-100
- Project
- Ishkōday Project
- Commodity
- zinc
- Region
- canada_on
- Reported Region
- Ontario
- Ticker
- LME
Geometry
- Grade
- 0.19
- Grade Unit
- %
- Intercept
- 9.8 m
- From
- 39 m
- To
- 48.8 m
Classification
- Deposit Type
- orogenic
- Sample Type
- drill
- Group ID
- LBX25-100:39-48.8
- Mining Method
- open_pit
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-03T00:00:00.000Z
Reasoning: Expanded from assay table. 0.19 % zinc is below against the default band [18, 10, 5, 2] %. Grade×width 1.9 %·m is below.
Negative factors
- 0.19 % zinc is below the weak threshold (2 %) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.19”
Context: LBX25-100
includingIshkōday Project · goldGrade: 0.825Grade Unit: g/tIntercept: 0.5 mView all detailsHide details
Identity
- Hole ID
- including
- Project
- Ishkōday Project
- Commodity
- gold
- Region
- canada_on
- Reported Region
- Ontario
- Ticker
- LME
Geometry
- Grade
- 0.825
- Grade Unit
- g/t
- Intercept
- 0.5 m
- From
- 48.3 m
- To
- 48.8 m
Classification
- Deposit Type
- orogenic
- Sample Type
- drill
- Group ID
- including:48.3-48.8
- Mining Method
- open_pit
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-03T00:00:00.000Z
Reasoning: Expanded from assay table. 0.825 g/t gold is weak against the open_pit mining band [5, 2, 1, 0.3] g/t. Grade×width 0.4 g/t·m is below (grade alone is weak; the better of the two is used).
Negative factors
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.825”
Context: including
includingIshkōday Project · silverGrade: 4.5Grade Unit: g/tIntercept: 0.5 mView all detailsHide details
Identity
- Hole ID
- including
- Project
- Ishkōday Project
- Commodity
- silver
- Region
- canada_on
- Reported Region
- Ontario
- Ticker
- LME
Geometry
- Grade
- 4.5
- Grade Unit
- g/t
- Intercept
- 0.5 m
- From
- 48.3 m
- To
- 48.8 m
Classification
- Deposit Type
- orogenic
- Sample Type
- drill
- Group ID
- including:48.3-48.8
- Mining Method
- open_pit
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-03T00:00:00.000Z
Reasoning: Expanded from assay table. 4.5 g/t silver is below against the default band [500, 200, 100, 30] g/t. Grade×width 2.3 g/t·m is below.
Negative factors
- 4.5 g/t silver is below the weak threshold (30 g/t) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“4.50”
Context: including
includingIshkōday Project · copperGrade: 0.09Grade Unit: %Intercept: 0.5 mView all detailsHide details
Identity
- Hole ID
- including
- Project
- Ishkōday Project
- Commodity
- copper
- Region
- canada_on
- Reported Region
- Ontario
- Ticker
- LME
Geometry
- Grade
- 0.09
- Grade Unit
- %
- Intercept
- 0.5 m
- From
- 48.3 m
- To
- 48.8 m
Classification
- Deposit Type
- orogenic
- Sample Type
- drill
- Group ID
- including:48.3-48.8
- Mining Method
- open_pit
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-03T00:00:00.000Z
Reasoning: Expanded from assay table. 0.09 % copper is below against the default band [2.5, 1, 0.5, 0.25] %. Grade×width 0.0 %·m is below.
Negative factors
- 0.09 % copper is below the weak threshold (0.25 %) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.09”
Context: including
includingIshkōday Project · zincGrade: 0.78Grade Unit: %Intercept: 0.5 mView all detailsHide details
Identity
- Hole ID
- including
- Project
- Ishkōday Project
- Commodity
- zinc
- Region
- canada_on
- Reported Region
- Ontario
- Ticker
- LME
Geometry
- Grade
- 0.78
- Grade Unit
- %
- Intercept
- 0.5 m
- From
- 48.3 m
- To
- 48.8 m
Classification
- Deposit Type
- orogenic
- Sample Type
- drill
- Group ID
- including:48.3-48.8
- Mining Method
- open_pit
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-03T00:00:00.000Z
Reasoning: Expanded from assay table. 0.78 % zinc is below against the default band [18, 10, 5, 2] %. Grade×width 0.4 %·m is below.
Negative factors
- 0.78 % zinc is below the weak threshold (2 %) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.78”
Context: including
LBX25-100Ishkōday Project · silverGrade: 0.96Grade Unit: g/tIntercept: 2.5 mView all detailsHide details
Identity
- Hole ID
- LBX25-100
- Project
- Ishkōday Project
- Commodity
- silver
- Region
- canada_on
- Reported Region
- Ontario
- Ticker
- LME
Geometry
- Grade
- 0.96
- Grade Unit
- g/t
- Intercept
- 2.5 m
- From
- 67 m
- To
- 69.5 m
Classification
- Deposit Type
- orogenic
- Sample Type
- drill
- Group ID
- LBX25-100:67-69.5
- Mining Method
- open_pit
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-03T00:00:00.000Z
Reasoning: Expanded from assay table. 0.96 g/t silver is below against the default band [500, 200, 100, 30] g/t. Grade×width 2.4 g/t·m is below.
Negative factors
- 0.96 g/t silver is below the weak threshold (30 g/t) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.96”
Context: LBX25-100
LBX25-100Ishkōday Project · copperGrade: 0.04Grade Unit: %Intercept: 2.5 mView all detailsHide details
Identity
- Hole ID
- LBX25-100
- Project
- Ishkōday Project
- Commodity
- copper
- Region
- canada_on
- Reported Region
- Ontario
- Ticker
- LME
Geometry
- Grade
- 0.04
- Grade Unit
- %
- Intercept
- 2.5 m
- From
- 67 m
- To
- 69.5 m
Classification
- Deposit Type
- orogenic
- Sample Type
- drill
- Group ID
- LBX25-100:67-69.5
- Mining Method
- open_pit
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-03T00:00:00.000Z
Reasoning: Expanded from assay table. 0.04 % copper is below against the default band [2.5, 1, 0.5, 0.25] %. Grade×width 0.1 %·m is below.
Negative factors
- 0.04 % copper is below the weak threshold (0.25 %) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.04”
Context: LBX25-100
LBX25-100Ishkōday Project · zincGrade: 0.04Grade Unit: %Intercept: 2.5 mView all detailsHide details
Identity
- Hole ID
- LBX25-100
- Project
- Ishkōday Project
- Commodity
- zinc
- Region
- canada_on
- Reported Region
- Ontario
- Ticker
- LME
Geometry
- Grade
- 0.04
- Grade Unit
- %
- Intercept
- 2.5 m
- From
- 67 m
- To
- 69.5 m
Classification
- Deposit Type
- orogenic
- Sample Type
- drill
- Group ID
- LBX25-100:67-69.5
- Mining Method
- open_pit
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-03T00:00:00.000Z
Reasoning: Expanded from assay table. 0.04 % zinc is below against the default band [18, 10, 5, 2] %. Grade×width 0.1 %·m is below.
Negative factors
- 0.04 % zinc is below the weak threshold (2 %) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.04”
Context: LBX25-100
LBX25-100Ishkōday Project · silverGrade: 1.17Grade Unit: g/tIntercept: 5 mView all detailsHide details
Identity
- Hole ID
- LBX25-100
- Project
- Ishkōday Project
- Commodity
- silver
- Region
- canada_on
- Reported Region
- Ontario
- Ticker
- LME
Geometry
- Grade
- 1.17
- Grade Unit
- g/t
- Intercept
- 5 m
- From
- 87.5 m
- To
- 92.5 m
Classification
- Deposit Type
- orogenic
- Sample Type
- drill
- Group ID
- LBX25-100:87.5-92.5
- Mining Method
- open_pit
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-03T00:00:00.000Z
Reasoning: Expanded from assay table. 1.17 g/t silver is below against the default band [500, 200, 100, 30] g/t. Grade×width 5.8 g/t·m is below.
Negative factors
- 1.17 g/t silver is below the weak threshold (30 g/t) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“1.17”
Context: LBX25-100
LBX25-100Ishkōday Project · copperGrade: 0.01Grade Unit: %Intercept: 5 mView all detailsHide details
Identity
- Hole ID
- LBX25-100
- Project
- Ishkōday Project
- Commodity
- copper
- Region
- canada_on
- Reported Region
- Ontario
- Ticker
- LME
Geometry
- Grade
- 0.01
- Grade Unit
- %
- Intercept
- 5 m
- From
- 87.5 m
- To
- 92.5 m
Classification
- Deposit Type
- orogenic
- Sample Type
- drill
- Group ID
- LBX25-100:87.5-92.5
- Mining Method
- open_pit
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-03T00:00:00.000Z
Reasoning: Expanded from assay table. 0.01 % copper is below against the default band [2.5, 1, 0.5, 0.25] %. Grade×width 0.1 %·m is below.
Negative factors
- 0.01 % copper is below the weak threshold (0.25 %) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.01”
Context: LBX25-100
LBX25-100Ishkōday Project · zincGrade: 0.2Grade Unit: %Intercept: 5 mView all detailsHide details
Identity
- Hole ID
- LBX25-100
- Project
- Ishkōday Project
- Commodity
- zinc
- Region
- canada_on
- Reported Region
- Ontario
- Ticker
- LME
Geometry
- Grade
- 0.2
- Grade Unit
- %
- Intercept
- 5 m
- From
- 87.5 m
- To
- 92.5 m
Classification
- Deposit Type
- orogenic
- Sample Type
- drill
- Group ID
- LBX25-100:87.5-92.5
- Mining Method
- open_pit
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-03T00:00:00.000Z
Reasoning: Expanded from assay table. 0.2 % zinc is below against the default band [18, 10, 5, 2] %. Grade×width 1.0 %·m is below.
Negative factors
- 0.2 % zinc is below the weak threshold (2 %) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.20”
Context: LBX25-100
includingIshkōday Project · goldGrade: 0.282Grade Unit: g/tIntercept: 1 mView all detailsHide details
Identity
- Hole ID
- including
- Project
- Ishkōday Project
- Commodity
- gold
- Region
- canada_on
- Reported Region
- Ontario
- Ticker
- LME
Geometry
- Grade
- 0.282
- Grade Unit
- g/t
- Intercept
- 1 m
- From
- 87.5 m
- To
- 88.5 m
Classification
- Deposit Type
- orogenic
- Sample Type
- drill
- Group ID
- including:87.5-88.5
- Mining Method
- open_pit
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-03T00:00:00.000Z
Reasoning: Expanded from assay table. 0.282 g/t gold is below against the open_pit mining band [5, 2, 1, 0.3] g/t. Grade×width 0.3 g/t·m is below.
Negative factors
- 0.282 g/t gold is below the weak threshold (0.3 g/t) on the open_pit mining band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.282”
Context: including
includingIshkōday Project · silverGrade: 2.45Grade Unit: g/tIntercept: 1 mView all detailsHide details
Identity
- Hole ID
- including
- Project
- Ishkōday Project
- Commodity
- silver
- Region
- canada_on
- Reported Region
- Ontario
- Ticker
- LME
Geometry
- Grade
- 2.45
- Grade Unit
- g/t
- Intercept
- 1 m
- From
- 87.5 m
- To
- 88.5 m
Classification
- Deposit Type
- orogenic
- Sample Type
- drill
- Group ID
- including:87.5-88.5
- Mining Method
- open_pit
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-03T00:00:00.000Z
Reasoning: Expanded from assay table. 2.45 g/t silver is below against the default band [500, 200, 100, 30] g/t. Grade×width 2.5 g/t·m is below.
Negative factors
- 2.45 g/t silver is below the weak threshold (30 g/t) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“2.45”
Context: including
includingIshkōday Project · copperGrade: 0.03Grade Unit: %Intercept: 1 mView all detailsHide details
Identity
- Hole ID
- including
- Project
- Ishkōday Project
- Commodity
- copper
- Region
- canada_on
- Reported Region
- Ontario
- Ticker
- LME
Geometry
- Grade
- 0.03
- Grade Unit
- %
- Intercept
- 1 m
- From
- 87.5 m
- To
- 88.5 m
Classification
- Deposit Type
- orogenic
- Sample Type
- drill
- Group ID
- including:87.5-88.5
- Mining Method
- open_pit
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-03T00:00:00.000Z
Reasoning: Expanded from assay table. 0.03 % copper is below against the default band [2.5, 1, 0.5, 0.25] %. Grade×width 0.0 %·m is below.
Negative factors
- 0.03 % copper is below the weak threshold (0.25 %) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.03”
Context: including
includingIshkōday Project · zincGrade: 0.73Grade Unit: %Intercept: 1 mView all detailsHide details
Identity
- Hole ID
- including
- Project
- Ishkōday Project
- Commodity
- zinc
- Region
- canada_on
- Reported Region
- Ontario
- Ticker
- LME
Geometry
- Grade
- 0.73
- Grade Unit
- %
- Intercept
- 1 m
- From
- 87.5 m
- To
- 88.5 m
Classification
- Deposit Type
- orogenic
- Sample Type
- drill
- Group ID
- including:87.5-88.5
- Mining Method
- open_pit
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-03T00:00:00.000Z
Reasoning: Expanded from assay table. 0.73 % zinc is below against the default band [18, 10, 5, 2] %. Grade×width 0.7 %·m is below.
Negative factors
- 0.73 % zinc is below the weak threshold (2 %) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.73”
Context: including
includingIshkōday Project · goldGrade: 0.27Grade Unit: g/tIntercept: 0.5 mView all detailsHide details
Identity
- Hole ID
- including
- Project
- Ishkōday Project
- Commodity
- gold
- Region
- canada_on
- Reported Region
- Ontario
- Ticker
- LME
Geometry
- Grade
- 0.27
- Grade Unit
- g/t
- Intercept
- 0.5 m
- From
- 88 m
- To
- 88.5 m
Classification
- Deposit Type
- orogenic
- Sample Type
- drill
- Group ID
- including:88-88.5
- Mining Method
- open_pit
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-03T00:00:00.000Z
Reasoning: Expanded from assay table. 0.27 g/t gold is below against the open_pit mining band [5, 2, 1, 0.3] g/t. Grade×width 0.1 g/t·m is below.
Negative factors
- 0.27 g/t gold is below the weak threshold (0.3 g/t) on the open_pit mining band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.270”
Context: including
includingIshkōday Project · silverGrade: 3.7Grade Unit: g/tIntercept: 0.5 mView all detailsHide details
Identity
- Hole ID
- including
- Project
- Ishkōday Project
- Commodity
- silver
- Region
- canada_on
- Reported Region
- Ontario
- Ticker
- LME
Geometry
- Grade
- 3.7
- Grade Unit
- g/t
- Intercept
- 0.5 m
- From
- 88 m
- To
- 88.5 m
Classification
- Deposit Type
- orogenic
- Sample Type
- drill
- Group ID
- including:88-88.5
- Mining Method
- open_pit
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-03T00:00:00.000Z
Reasoning: Expanded from assay table. 3.7 g/t silver is below against the default band [500, 200, 100, 30] g/t. Grade×width 1.9 g/t·m is below.
Negative factors
- 3.7 g/t silver is below the weak threshold (30 g/t) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“3.70”
Context: including
includingIshkōday Project · copperGrade: 0.04Grade Unit: %Intercept: 0.5 mView all detailsHide details
Identity
- Hole ID
- including
- Project
- Ishkōday Project
- Commodity
- copper
- Region
- canada_on
- Reported Region
- Ontario
- Ticker
- LME
Geometry
- Grade
- 0.04
- Grade Unit
- %
- Intercept
- 0.5 m
- From
- 88 m
- To
- 88.5 m
Classification
- Deposit Type
- orogenic
- Sample Type
- drill
- Group ID
- including:88-88.5
- Mining Method
- open_pit
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-03T00:00:00.000Z
Reasoning: Expanded from assay table. 0.04 % copper is below against the default band [2.5, 1, 0.5, 0.25] %. Grade×width 0.0 %·m is below.
Negative factors
- 0.04 % copper is below the weak threshold (0.25 %) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.04”
Context: including
includingIshkōday Project · zincGrade: 1.32Grade Unit: %Intercept: 0.5 mView all detailsHide details
Identity
- Hole ID
- including
- Project
- Ishkōday Project
- Commodity
- zinc
- Region
- canada_on
- Reported Region
- Ontario
- Ticker
- LME
Geometry
- Grade
- 1.32
- Grade Unit
- %
- Intercept
- 0.5 m
- From
- 88 m
- To
- 88.5 m
Classification
- Deposit Type
- orogenic
- Sample Type
- drill
- Group ID
- including:88-88.5
- Mining Method
- open_pit
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-03T00:00:00.000Z
Reasoning: Expanded from assay table. 1.32 % zinc is below against the default band [18, 10, 5, 2] %. Grade×width 0.7 %·m is below.
Negative factors
- 1.32 % zinc is below the weak threshold (2 %) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“1.32”
Context: including
LBX25-100Ishkōday Project · silverGrade: 3.3Grade Unit: g/tIntercept: 0.8 mView all detailsHide details
Identity
- Hole ID
- LBX25-100
- Project
- Ishkōday Project
- Commodity
- silver
- Region
- canada_on
- Reported Region
- Ontario
- Ticker
- LME
Geometry
- Grade
- 3.3
- Grade Unit
- g/t
- Intercept
- 0.8 m
- From
- 96.9 m
- To
- 97.7 m
Classification
- Deposit Type
- orogenic
- Sample Type
- drill
- Group ID
- LBX25-100:96.9-97.7
- Mining Method
- open_pit
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-03T00:00:00.000Z
Reasoning: Expanded from assay table. 3.3 g/t silver is below against the default band [500, 200, 100, 30] g/t. Grade×width 2.6 g/t·m is below.
Negative factors
- 3.3 g/t silver is below the weak threshold (30 g/t) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“3.30”
Context: LBX25-100
LBX25-100Ishkōday Project · copperGrade: 0.03Grade Unit: %Intercept: 0.8 mView all detailsHide details
Identity
- Hole ID
- LBX25-100
- Project
- Ishkōday Project
- Commodity
- copper
- Region
- canada_on
- Reported Region
- Ontario
- Ticker
- LME
Geometry
- Grade
- 0.03
- Grade Unit
- %
- Intercept
- 0.8 m
- From
- 96.9 m
- To
- 97.7 m
Classification
- Deposit Type
- orogenic
- Sample Type
- drill
- Group ID
- LBX25-100:96.9-97.7
- Mining Method
- open_pit
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-03T00:00:00.000Z
Reasoning: Expanded from assay table. 0.03 % copper is below against the default band [2.5, 1, 0.5, 0.25] %. Grade×width 0.0 %·m is below.
Negative factors
- 0.03 % copper is below the weak threshold (0.25 %) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.03”
Context: LBX25-100
LBX25-100Ishkōday Project · zincGrade: 0.4Grade Unit: %Intercept: 0.8 mView all detailsHide details
Identity
- Hole ID
- LBX25-100
- Project
- Ishkōday Project
- Commodity
- zinc
- Region
- canada_on
- Reported Region
- Ontario
- Ticker
- LME
Geometry
- Grade
- 0.4
- Grade Unit
- %
- Intercept
- 0.8 m
- From
- 96.9 m
- To
- 97.7 m
Classification
- Deposit Type
- orogenic
- Sample Type
- drill
- Group ID
- LBX25-100:96.9-97.7
- Mining Method
- open_pit
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-03T00:00:00.000Z
Reasoning: Expanded from assay table. 0.4 % zinc is below against the default band [18, 10, 5, 2] %. Grade×width 0.3 %·m is below.
Negative factors
- 0.4 % zinc is below the weak threshold (2 %) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.40”
Context: LBX25-100
LBX25-100Ishkōday Project · silverGrade: 7.1Grade Unit: g/tIntercept: 0.8 mView all detailsHide details
Identity
- Hole ID
- LBX25-100
- Project
- Ishkōday Project
- Commodity
- silver
- Region
- canada_on
- Reported Region
- Ontario
- Ticker
- LME
Geometry
- Grade
- 7.1
- Grade Unit
- g/t
- Intercept
- 0.8 m
- From
- 106.5 m
- To
- 107.3 m
Classification
- Deposit Type
- orogenic
- Sample Type
- drill
- Group ID
- LBX25-100:106.5-107.3
- Mining Method
- open_pit
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-03T00:00:00.000Z
Reasoning: Expanded from assay table. 7.1 g/t silver is below against the default band [500, 200, 100, 30] g/t. Grade×width 5.7 g/t·m is below.
Negative factors
- 7.1 g/t silver is below the weak threshold (30 g/t) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“7.10”
Context: LBX25-100
LBX25-100Ishkōday Project · copperGrade: 0.05Grade Unit: %Intercept: 0.8 mView all detailsHide details
Identity
- Hole ID
- LBX25-100
- Project
- Ishkōday Project
- Commodity
- copper
- Region
- canada_on
- Reported Region
- Ontario
- Ticker
- LME
Geometry
- Grade
- 0.05
- Grade Unit
- %
- Intercept
- 0.8 m
- From
- 106.5 m
- To
- 107.3 m
Classification
- Deposit Type
- orogenic
- Sample Type
- drill
- Group ID
- LBX25-100:106.5-107.3
- Mining Method
- open_pit
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-03T00:00:00.000Z
Reasoning: Expanded from assay table. 0.05 % copper is below against the default band [2.5, 1, 0.5, 0.25] %. Grade×width 0.0 %·m is below.
Negative factors
- 0.05 % copper is below the weak threshold (0.25 %) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.05”
Context: LBX25-100
LBX25-100Ishkōday Project · zincGrade: 0.75Grade Unit: %Intercept: 0.8 mView all detailsHide details
Identity
- Hole ID
- LBX25-100
- Project
- Ishkōday Project
- Commodity
- zinc
- Region
- canada_on
- Reported Region
- Ontario
- Ticker
- LME
Geometry
- Grade
- 0.75
- Grade Unit
- %
- Intercept
- 0.8 m
- From
- 106.5 m
- To
- 107.3 m
Classification
- Deposit Type
- orogenic
- Sample Type
- drill
- Group ID
- LBX25-100:106.5-107.3
- Mining Method
- open_pit
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-03T00:00:00.000Z
Reasoning: Expanded from assay table. 0.75 % zinc is below against the default band [18, 10, 5, 2] %. Grade×width 0.6 %·m is below.
Negative factors
- 0.75 % zinc is below the weak threshold (2 %) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.75”
Context: LBX25-100
LBX25-100Ishkōday Project · silverGrade: 0.81Grade Unit: g/tIntercept: 20 mView all detailsHide details
Identity
- Hole ID
- LBX25-100
- Project
- Ishkōday Project
- Commodity
- silver
- Region
- canada_on
- Reported Region
- Ontario
- Ticker
- LME
Geometry
- Grade
- 0.81
- Grade Unit
- g/t
- Intercept
- 20 m
- From
- 129.8 m
- To
- 149.8 m
Classification
- Deposit Type
- orogenic
- Sample Type
- drill
- Group ID
- LBX25-100:129.8-149.8
- Mining Method
- open_pit
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-03T00:00:00.000Z
Reasoning: Expanded from assay table. 0.81 g/t silver is below against the default band [500, 200, 100, 30] g/t. Grade×width 16.2 g/t·m is below.
Negative factors
- 0.81 g/t silver is below the weak threshold (30 g/t) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.81”
Context: LBX25-100
LBX25-100Ishkōday Project · copperGrade: 0.01Grade Unit: %Intercept: 20 mView all detailsHide details
Identity
- Hole ID
- LBX25-100
- Project
- Ishkōday Project
- Commodity
- copper
- Region
- canada_on
- Reported Region
- Ontario
- Ticker
- LME
Geometry
- Grade
- 0.01
- Grade Unit
- %
- Intercept
- 20 m
- From
- 129.8 m
- To
- 149.8 m
Classification
- Deposit Type
- orogenic
- Sample Type
- drill
- Group ID
- LBX25-100:129.8-149.8
- Mining Method
- open_pit
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-03T00:00:00.000Z
Reasoning: Expanded from assay table. 0.01 % copper is below against the default band [2.5, 1, 0.5, 0.25] %. Grade×width 0.2 %·m is below.
Negative factors
- 0.01 % copper is below the weak threshold (0.25 %) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.01”
Context: LBX25-100
LBX25-100Ishkōday Project · zincGrade: 0.22Grade Unit: %Intercept: 20 mView all detailsHide details
Identity
- Hole ID
- LBX25-100
- Project
- Ishkōday Project
- Commodity
- zinc
- Region
- canada_on
- Reported Region
- Ontario
- Ticker
- LME
Geometry
- Grade
- 0.22
- Grade Unit
- %
- Intercept
- 20 m
- From
- 129.8 m
- To
- 149.8 m
Classification
- Deposit Type
- orogenic
- Sample Type
- drill
- Group ID
- LBX25-100:129.8-149.8
- Mining Method
- open_pit
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-03T00:00:00.000Z
Reasoning: Expanded from assay table. 0.22 % zinc is below against the default band [18, 10, 5, 2] %. Grade×width 4.4 %·m is below.
Negative factors
- 0.22 % zinc is below the weak threshold (2 %) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.22”
Context: LBX25-100
includingIshkōday Project · goldGrade: 0.937Grade Unit: g/tIntercept: 0.5 mView all detailsHide details
Identity
- Hole ID
- including
- Project
- Ishkōday Project
- Commodity
- gold
- Region
- canada_on
- Reported Region
- Ontario
- Ticker
- LME
Geometry
- Grade
- 0.937
- Grade Unit
- g/t
- Intercept
- 0.5 m
- From
- 130.6 m
- To
- 131.1 m
Classification
- Deposit Type
- orogenic
- Sample Type
- drill
- Group ID
- including:130.6-131.1
- Mining Method
- open_pit
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-03T00:00:00.000Z
Reasoning: Expanded from assay table. 0.937 g/t gold is weak against the open_pit mining band [5, 2, 1, 0.3] g/t. Grade×width 0.5 g/t·m is below (grade alone is weak; the better of the two is used).
Negative factors
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.937”
Context: including
includingIshkōday Project · silverGrade: 14.9Grade Unit: g/tIntercept: 0.5 mView all detailsHide details
Identity
- Hole ID
- including
- Project
- Ishkōday Project
- Commodity
- silver
- Region
- canada_on
- Reported Region
- Ontario
- Ticker
- LME
Geometry
- Grade
- 14.9
- Grade Unit
- g/t
- Intercept
- 0.5 m
- From
- 130.6 m
- To
- 131.1 m
Classification
- Deposit Type
- orogenic
- Sample Type
- drill
- Group ID
- including:130.6-131.1
- Mining Method
- open_pit
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-03T00:00:00.000Z
Reasoning: Expanded from assay table. 14.9 g/t silver is below against the default band [500, 200, 100, 30] g/t. Grade×width 7.5 g/t·m is below.
Negative factors
- 14.9 g/t silver is below the weak threshold (30 g/t) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“14.90”
Context: including
includingIshkōday Project · copperGrade: 0.11Grade Unit: %Intercept: 0.5 mView all detailsHide details
Identity
- Hole ID
- including
- Project
- Ishkōday Project
- Commodity
- copper
- Region
- canada_on
- Reported Region
- Ontario
- Ticker
- LME
Geometry
- Grade
- 0.11
- Grade Unit
- %
- Intercept
- 0.5 m
- From
- 130.6 m
- To
- 131.1 m
Classification
- Deposit Type
- orogenic
- Sample Type
- drill
- Group ID
- including:130.6-131.1
- Mining Method
- open_pit
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-03T00:00:00.000Z
Reasoning: Expanded from assay table. 0.11 % copper is below against the default band [2.5, 1, 0.5, 0.25] %. Grade×width 0.1 %·m is below.
Negative factors
- 0.11 % copper is below the weak threshold (0.25 %) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.11”
Context: including
includingIshkōday Project · zincGrade: 4.33Grade Unit: %Intercept: 0.5 mView all detailsHide details
Identity
- Hole ID
- including
- Project
- Ishkōday Project
- Commodity
- zinc
- Region
- canada_on
- Reported Region
- Ontario
- Ticker
- LME
Geometry
- Grade
- 4.33
- Grade Unit
- %
- Intercept
- 0.5 m
- From
- 130.6 m
- To
- 131.1 m
Classification
- Deposit Type
- orogenic
- Sample Type
- drill
- Group ID
- including:130.6-131.1
- Mining Method
- open_pit
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-03T00:00:00.000Z
Reasoning: Expanded from assay table. 4.33 % zinc is weak against the default band [18, 10, 5, 2] %. Grade×width 2.2 %·m is below (grade alone is weak; the better of the two is used).
Negative factors
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“4.33”
Context: including
includingIshkōday Project · goldGrade: 0.193Grade Unit: g/tIntercept: 0.5 mView all detailsHide details
Identity
- Hole ID
- including
- Project
- Ishkōday Project
- Commodity
- gold
- Region
- canada_on
- Reported Region
- Ontario
- Ticker
- LME
Geometry
- Grade
- 0.193
- Grade Unit
- g/t
- Intercept
- 0.5 m
- From
- 144.6 m
- To
- 145.1 m
Classification
- Deposit Type
- orogenic
- Sample Type
- drill
- Group ID
- including:144.6-145.1
- Mining Method
- open_pit
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-03T00:00:00.000Z
Reasoning: Expanded from assay table. 0.193 g/t gold is below against the open_pit mining band [5, 2, 1, 0.3] g/t. Grade×width 0.1 g/t·m is below.
Negative factors
- 0.193 g/t gold is below the weak threshold (0.3 g/t) on the open_pit mining band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.193”
Context: including
includingIshkōday Project · silverGrade: 1.9Grade Unit: g/tIntercept: 0.5 mView all detailsHide details
Identity
- Hole ID
- including
- Project
- Ishkōday Project
- Commodity
- silver
- Region
- canada_on
- Reported Region
- Ontario
- Ticker
- LME
Geometry
- Grade
- 1.9
- Grade Unit
- g/t
- Intercept
- 0.5 m
- From
- 144.6 m
- To
- 145.1 m
Classification
- Deposit Type
- orogenic
- Sample Type
- drill
- Group ID
- including:144.6-145.1
- Mining Method
- open_pit
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-03T00:00:00.000Z
Reasoning: Expanded from assay table. 1.9 g/t silver is below against the default band [500, 200, 100, 30] g/t. Grade×width 0.9 g/t·m is below.
Negative factors
- 1.9 g/t silver is below the weak threshold (30 g/t) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“1.90”
Context: including
includingIshkōday Project · copperGrade: 0.05Grade Unit: %Intercept: 0.5 mView all detailsHide details
Identity
- Hole ID
- including
- Project
- Ishkōday Project
- Commodity
- copper
- Region
- canada_on
- Reported Region
- Ontario
- Ticker
- LME
Geometry
- Grade
- 0.05
- Grade Unit
- %
- Intercept
- 0.5 m
- From
- 144.6 m
- To
- 145.1 m
Classification
- Deposit Type
- orogenic
- Sample Type
- drill
- Group ID
- including:144.6-145.1
- Mining Method
- open_pit
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-03T00:00:00.000Z
Reasoning: Expanded from assay table. 0.05 % copper is below against the default band [2.5, 1, 0.5, 0.25] %. Grade×width 0.0 %·m is below.
Negative factors
- 0.05 % copper is below the weak threshold (0.25 %) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.05”
Context: including
includingIshkōday Project · zincGrade: 1.14Grade Unit: %Intercept: 0.5 mView all detailsHide details
Identity
- Hole ID
- including
- Project
- Ishkōday Project
- Commodity
- zinc
- Region
- canada_on
- Reported Region
- Ontario
- Ticker
- LME
Geometry
- Grade
- 1.14
- Grade Unit
- %
- Intercept
- 0.5 m
- From
- 144.6 m
- To
- 145.1 m
Classification
- Deposit Type
- orogenic
- Sample Type
- drill
- Group ID
- including:144.6-145.1
- Mining Method
- open_pit
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-03T00:00:00.000Z
Reasoning: Expanded from assay table. 1.14 % zinc is below against the default band [18, 10, 5, 2] %. Grade×width 0.6 %·m is below.
Negative factors
- 1.14 % zinc is below the weak threshold (2 %) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“1.14”
Context: including
LBX25-100Ishkōday Project · silverGrade: 2.5Grade Unit: g/tIntercept: 0.8 mView all detailsHide details
Identity
- Hole ID
- LBX25-100
- Project
- Ishkōday Project
- Commodity
- silver
- Region
- canada_on
- Reported Region
- Ontario
- Ticker
- LME
Geometry
- Grade
- 2.5
- Grade Unit
- g/t
- Intercept
- 0.8 m
- From
- 169 m
- To
- 169.8 m
Classification
- Deposit Type
- orogenic
- Sample Type
- drill
- Group ID
- LBX25-100:169-169.8
- Mining Method
- open_pit
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-03T00:00:00.000Z
Reasoning: Expanded from assay table. 2.5 g/t silver is below against the default band [500, 200, 100, 30] g/t. Grade×width 2.0 g/t·m is below.
Negative factors
- 2.5 g/t silver is below the weak threshold (30 g/t) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“2.50”
Context: LBX25-100
LBX25-100Ishkōday Project · copperGrade: 0.03Grade Unit: %Intercept: 0.8 mView all detailsHide details
Identity
- Hole ID
- LBX25-100
- Project
- Ishkōday Project
- Commodity
- copper
- Region
- canada_on
- Reported Region
- Ontario
- Ticker
- LME
Geometry
- Grade
- 0.03
- Grade Unit
- %
- Intercept
- 0.8 m
- From
- 169 m
- To
- 169.8 m
Classification
- Deposit Type
- orogenic
- Sample Type
- drill
- Group ID
- LBX25-100:169-169.8
- Mining Method
- open_pit
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-03T00:00:00.000Z
Reasoning: Expanded from assay table. 0.03 % copper is below against the default band [2.5, 1, 0.5, 0.25] %. Grade×width 0.0 %·m is below.
Negative factors
- 0.03 % copper is below the weak threshold (0.25 %) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.03”
Context: LBX25-100
LBX25-100Ishkōday Project · zincGrade: 0.7Grade Unit: %Intercept: 0.8 mView all detailsHide details
Identity
- Hole ID
- LBX25-100
- Project
- Ishkōday Project
- Commodity
- zinc
- Region
- canada_on
- Reported Region
- Ontario
- Ticker
- LME
Geometry
- Grade
- 0.7
- Grade Unit
- %
- Intercept
- 0.8 m
- From
- 169 m
- To
- 169.8 m
Classification
- Deposit Type
- orogenic
- Sample Type
- drill
- Group ID
- LBX25-100:169-169.8
- Mining Method
- open_pit
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-03T00:00:00.000Z
Reasoning: Expanded from assay table. 0.7 % zinc is below against the default band [18, 10, 5, 2] %. Grade×width 0.6 %·m is below.
Negative factors
- 0.7 % zinc is below the weak threshold (2 %) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.70”
Context: LBX25-100
LBX25-100Ishkōday Project · silverGrade: 2.16Grade Unit: g/tIntercept: 8 mView all detailsHide details
Identity
- Hole ID
- LBX25-100
- Project
- Ishkōday Project
- Commodity
- silver
- Region
- canada_on
- Reported Region
- Ontario
- Ticker
- LME
Geometry
- Grade
- 2.16
- Grade Unit
- g/t
- Intercept
- 8 m
- From
- 179 m
- To
- 187 m
Classification
- Deposit Type
- orogenic
- Sample Type
- drill
- Group ID
- LBX25-100:179-187
- Mining Method
- open_pit
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-03T00:00:00.000Z
Reasoning: Expanded from assay table. 2.16 g/t silver is below against the default band [500, 200, 100, 30] g/t. Grade×width 17.3 g/t·m is below.
Negative factors
- 2.16 g/t silver is below the weak threshold (30 g/t) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“2.16”
Context: LBX25-100
LBX25-100Ishkōday Project · copperGrade: 0.05Grade Unit: %Intercept: 8 mView all detailsHide details
Identity
- Hole ID
- LBX25-100
- Project
- Ishkōday Project
- Commodity
- copper
- Region
- canada_on
- Reported Region
- Ontario
- Ticker
- LME
Geometry
- Grade
- 0.05
- Grade Unit
- %
- Intercept
- 8 m
- From
- 179 m
- To
- 187 m
Classification
- Deposit Type
- orogenic
- Sample Type
- drill
- Group ID
- LBX25-100:179-187
- Mining Method
- open_pit
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-03T00:00:00.000Z
Reasoning: Expanded from assay table. 0.05 % copper is below against the default band [2.5, 1, 0.5, 0.25] %. Grade×width 0.4 %·m is below.
Negative factors
- 0.05 % copper is below the weak threshold (0.25 %) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.05”
Context: LBX25-100
LBX25-100Ishkōday Project · zincGrade: 0.28Grade Unit: %Intercept: 8 mView all detailsHide details
Identity
- Hole ID
- LBX25-100
- Project
- Ishkōday Project
- Commodity
- zinc
- Region
- canada_on
- Reported Region
- Ontario
- Ticker
- LME
Geometry
- Grade
- 0.28
- Grade Unit
- %
- Intercept
- 8 m
- From
- 179 m
- To
- 187 m
Classification
- Deposit Type
- orogenic
- Sample Type
- drill
- Group ID
- LBX25-100:179-187
- Mining Method
- open_pit
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-03T00:00:00.000Z
Reasoning: Expanded from assay table. 0.28 % zinc is below against the default band [18, 10, 5, 2] %. Grade×width 2.2 %·m is below.
Negative factors
- 0.28 % zinc is below the weak threshold (2 %) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.28”
Context: LBX25-100
includingIshkōday Project · goldGrade: 0.403Grade Unit: g/tIntercept: 1.4 mView all detailsHide details
Identity
- Hole ID
- including
- Project
- Ishkōday Project
- Commodity
- gold
- Region
- canada_on
- Reported Region
- Ontario
- Ticker
- LME
Geometry
- Grade
- 0.403
- Grade Unit
- g/t
- Intercept
- 1.4 m
- From
- 180 m
- To
- 181.4 m
Classification
- Deposit Type
- orogenic
- Sample Type
- drill
- Group ID
- including:180-181.4
- Mining Method
- open_pit
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-03T00:00:00.000Z
Reasoning: Expanded from assay table. 0.403 g/t gold is weak against the open_pit mining band [5, 2, 1, 0.3] g/t. Grade×width 0.6 g/t·m is below (grade alone is weak; the better of the two is used).
Negative factors
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.403”
Context: including
includingIshkōday Project · silverGrade: 5.15Grade Unit: g/tIntercept: 1.4 mView all detailsHide details
Identity
- Hole ID
- including
- Project
- Ishkōday Project
- Commodity
- silver
- Region
- canada_on
- Reported Region
- Ontario
- Ticker
- LME
Geometry
- Grade
- 5.15
- Grade Unit
- g/t
- Intercept
- 1.4 m
- From
- 180 m
- To
- 181.4 m
Classification
- Deposit Type
- orogenic
- Sample Type
- drill
- Group ID
- including:180-181.4
- Mining Method
- open_pit
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-03T00:00:00.000Z
Reasoning: Expanded from assay table. 5.15 g/t silver is below against the default band [500, 200, 100, 30] g/t. Grade×width 7.2 g/t·m is below.
Negative factors
- 5.15 g/t silver is below the weak threshold (30 g/t) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“5.15”
Context: including
includingIshkōday Project · copperGrade: 0.11Grade Unit: %Intercept: 1.4 mView all detailsHide details
Identity
- Hole ID
- including
- Project
- Ishkōday Project
- Commodity
- copper
- Region
- canada_on
- Reported Region
- Ontario
- Ticker
- LME
Geometry
- Grade
- 0.11
- Grade Unit
- %
- Intercept
- 1.4 m
- From
- 180 m
- To
- 181.4 m
Classification
- Deposit Type
- orogenic
- Sample Type
- drill
- Group ID
- including:180-181.4
- Mining Method
- open_pit
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-03T00:00:00.000Z
Reasoning: Expanded from assay table. 0.11 % copper is below against the default band [2.5, 1, 0.5, 0.25] %. Grade×width 0.2 %·m is below.
Negative factors
- 0.11 % copper is below the weak threshold (0.25 %) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.11”
Context: including
includingIshkōday Project · zincGrade: 0.36Grade Unit: %Intercept: 1.4 mView all detailsHide details
Identity
- Hole ID
- including
- Project
- Ishkōday Project
- Commodity
- zinc
- Region
- canada_on
- Reported Region
- Ontario
- Ticker
- LME
Geometry
- Grade
- 0.36
- Grade Unit
- %
- Intercept
- 1.4 m
- From
- 180 m
- To
- 181.4 m
Classification
- Deposit Type
- orogenic
- Sample Type
- drill
- Group ID
- including:180-181.4
- Mining Method
- open_pit
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-03T00:00:00.000Z
Reasoning: Expanded from assay table. 0.36 % zinc is below against the default band [18, 10, 5, 2] %. Grade×width 0.5 %·m is below.
Negative factors
- 0.36 % zinc is below the weak threshold (2 %) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.36”
Context: including
includingIshkōday Project · goldGrade: 0.443Grade Unit: g/tIntercept: 0.7 mView all detailsHide details
Identity
- Hole ID
- including
- Project
- Ishkōday Project
- Commodity
- gold
- Region
- canada_on
- Reported Region
- Ontario
- Ticker
- LME
Geometry
- Grade
- 0.443
- Grade Unit
- g/t
- Intercept
- 0.7 m
- From
- 183.7 m
- To
- 184.4 m
Classification
- Deposit Type
- orogenic
- Sample Type
- drill
- Group ID
- including:183.7-184.4
- Mining Method
- open_pit
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-03T00:00:00.000Z
Reasoning: Expanded from assay table. 0.443 g/t gold is weak against the open_pit mining band [5, 2, 1, 0.3] g/t. Grade×width 0.3 g/t·m is below (grade alone is weak; the better of the two is used).
Negative factors
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.443”
Context: including
includingIshkōday Project · silverGrade: 7Grade Unit: g/tIntercept: 0.7 mView all detailsHide details
Identity
- Hole ID
- including
- Project
- Ishkōday Project
- Commodity
- silver
- Region
- canada_on
- Reported Region
- Ontario
- Ticker
- LME
Geometry
- Grade
- 7
- Grade Unit
- g/t
- Intercept
- 0.7 m
- From
- 183.7 m
- To
- 184.4 m
Classification
- Deposit Type
- orogenic
- Sample Type
- drill
- Group ID
- including:183.7-184.4
- Mining Method
- open_pit
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-03T00:00:00.000Z
Reasoning: Expanded from assay table. 7 g/t silver is below against the default band [500, 200, 100, 30] g/t. Grade×width 4.9 g/t·m is below.
Negative factors
- 7 g/t silver is below the weak threshold (30 g/t) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“7.00”
Context: including
includingIshkōday Project · copperGrade: 0.15Grade Unit: %Intercept: 0.7 mView all detailsHide details
Identity
- Hole ID
- including
- Project
- Ishkōday Project
- Commodity
- copper
- Region
- canada_on
- Reported Region
- Ontario
- Ticker
- LME
Geometry
- Grade
- 0.15
- Grade Unit
- %
- Intercept
- 0.7 m
- From
- 183.7 m
- To
- 184.4 m
Classification
- Deposit Type
- orogenic
- Sample Type
- drill
- Group ID
- including:183.7-184.4
- Mining Method
- open_pit
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-03T00:00:00.000Z
Reasoning: Expanded from assay table. 0.15 % copper is below against the default band [2.5, 1, 0.5, 0.25] %. Grade×width 0.1 %·m is below.
Negative factors
- 0.15 % copper is below the weak threshold (0.25 %) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.15”
Context: including
includingIshkōday Project · zincGrade: 1.81Grade Unit: %Intercept: 0.7 mView all detailsHide details
Identity
- Hole ID
- including
- Project
- Ishkōday Project
- Commodity
- zinc
- Region
- canada_on
- Reported Region
- Ontario
- Ticker
- LME
Geometry
- Grade
- 1.81
- Grade Unit
- %
- Intercept
- 0.7 m
- From
- 183.7 m
- To
- 184.4 m
Classification
- Deposit Type
- orogenic
- Sample Type
- drill
- Group ID
- including:183.7-184.4
- Mining Method
- open_pit
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-03T00:00:00.000Z
Reasoning: Expanded from assay table. 1.81 % zinc is below against the default band [18, 10, 5, 2] %. Grade×width 1.3 %·m is below.
Negative factors
- 1.81 % zinc is below the weak threshold (2 %) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“1.81”
Context: including
LBX25-100Ishkōday Project · silverGrade: 3.6Grade Unit: g/tIntercept: 0.6 mView all detailsHide details
Identity
- Hole ID
- LBX25-100
- Project
- Ishkōday Project
- Commodity
- silver
- Region
- canada_on
- Reported Region
- Ontario
- Ticker
- LME
Geometry
- Grade
- 3.6
- Grade Unit
- g/t
- Intercept
- 0.6 m
- From
- 284.4 m
- To
- 285 m
Classification
- Deposit Type
- orogenic
- Sample Type
- drill
- Group ID
- LBX25-100:284.4-285
- Mining Method
- open_pit
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-03T00:00:00.000Z
Reasoning: Expanded from assay table. 3.6 g/t silver is below against the default band [500, 200, 100, 30] g/t. Grade×width 2.2 g/t·m is below.
Negative factors
- 3.6 g/t silver is below the weak threshold (30 g/t) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“3.60”
Context: LBX25-100
LBX25-100Ishkōday Project · copperGrade: 0.16Grade Unit: %Intercept: 0.6 mView all detailsHide details
Identity
- Hole ID
- LBX25-100
- Project
- Ishkōday Project
- Commodity
- copper
- Region
- canada_on
- Reported Region
- Ontario
- Ticker
- LME
Geometry
- Grade
- 0.16
- Grade Unit
- %
- Intercept
- 0.6 m
- From
- 284.4 m
- To
- 285 m
Classification
- Deposit Type
- orogenic
- Sample Type
- drill
- Group ID
- LBX25-100:284.4-285
- Mining Method
- open_pit
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-03T00:00:00.000Z
Reasoning: Expanded from assay table. 0.16 % copper is below against the default band [2.5, 1, 0.5, 0.25] %. Grade×width 0.1 %·m is below.
Negative factors
- 0.16 % copper is below the weak threshold (0.25 %) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.16”
Context: LBX25-100
LBX25-100Ishkōday Project · zincGrade: 0.64Grade Unit: %Intercept: 0.6 mView all detailsHide details
Identity
- Hole ID
- LBX25-100
- Project
- Ishkōday Project
- Commodity
- zinc
- Region
- canada_on
- Reported Region
- Ontario
- Ticker
- LME
Geometry
- Grade
- 0.64
- Grade Unit
- %
- Intercept
- 0.6 m
- From
- 284.4 m
- To
- 285 m
Classification
- Deposit Type
- orogenic
- Sample Type
- drill
- Group ID
- LBX25-100:284.4-285
- Mining Method
- open_pit
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-03T00:00:00.000Z
Reasoning: Expanded from assay table. 0.64 % zinc is below against the default band [18, 10, 5, 2] %. Grade×width 0.4 %·m is below.
Negative factors
- 0.64 % zinc is below the weak threshold (2 %) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.64”
Context: LBX25-100
How Atlas produces this analysis
Minestarters Atlas uses automated extraction to summarize mining announcements, identify reported measurements, and classify supporting evidence. Sentiment reflects the extracted narrative and classification rules; it is an interpretation, not a reported measurement. Evidence quotes and context are provided where available. Missing data, low-confidence results, and review flags indicate limitations. Check the original publisher announcement before relying on an interpretation.