LAURION Reports Multiple Gold and Polymetallic Intercepts, Including 9.90 m Grading 0.563 g/t Au and 4.55 m Grading 0.76% Cu and 12.29 g/t Ag, Including 1.70 m Grading 1.56% Cu and 24.45 g/t Ag at Ishkōday

Original announcement by prospectors_exchange on

Company
LAURION Mineral Exploration Inc.
Ticker
LME
Exchange
Unavailable
Region
Northwestern Ontario
Primary commodity
Gold
Secondary commodities
Silver, Copper, Zinc
Document categories
Drill results
Extracted
2026-09-24 13:01:29 UTC

Analysis by Minestarters Atlas

Atlas analysis published:

Minestarters Atlas analysis

Summary

LAURION Mineral Exploration reported assay results from two drill holes, LBX26-109 and LBX26-110, at its Ishkōday Gold and Polymetallic Project in Northwestern Ontario. Highlights include 9.90 m grading 0.563 g/t Au and 4.55 m grading 0.76% Cu and 12.29 g/t Ag, with a sub-interval of 1.70 m grading 1.56% Cu and 24.45 g/t Ag. The program aims to advance the A-Zone towards a potential maiden Mineral Resource Estimate, with unexpected deeper intervals providing new geological information.

Reasoning: The drill results include unexpected deeper polymetallic intercepts that add novelty and expand the known mineralized system, supporting future resource definition. While gold grades are modest compared to historical results, the copper and silver grades are encouraging. The program is well-supported by robust QA/QC, but the lack of true width determination is a minor drawback.

Positive factors

  • Discovery of unexpected deeper polymetallic mineralization in LBX26-110, providing new geological information for follow-up.
  • Polymetallic intercepts show good grades for copper and silver, and moderate for zinc, contributing to the overall mineral system understanding.
  • Drill program is designed to systematically advance the A-Zone towards a potential maiden Mineral Resource Estimate, indicating progress towards resource definition.
  • Comprehensive QA/QC protocols are disclosed, including QP sign-off, certified labs, and insertion of blanks, standards, and duplicates.

Negative factors

  • Gold grades in the reported intercepts are generally lower than the project's historical average.
  • True widths have not been determined for any of the reported intercepts, which may overstate apparent thickness.
  • Some copper and zinc grades are low, indicating variability in mineralization.

Low confidence — this extraction should be reviewed alongside the original source.

Facts used in scoring: 87

Classification and evidence

QA/QC Disclosedpositive

Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).

Why it applies: The release details comprehensive QA/QC protocols including QP sign-off, certified labs (ALS), and insertion of blanks, standards, and duplicates.

Evidence · text

“The technical contents of this press release have been reviewed and approved by Dr. Trevor Boyd, Ph.D., P.Geo., a consultant to LAURION and a Qualified Person as defined by National Instrument 43-101 – Standards of Disclosure for Mineral Projects (“NI 43-101”). Dr. Boyd is independent of the Company within the meaning of NI 43-101. Sampling and QA/QC Protocols All drill core is transported and stored inside the core logging facility located at the Ishkōday Project in Greenstone, Ontario. LAURION employs an industry standard system of external standards, blanks and duplicates for all of its sampling, in addition to the QA/QC protocol employed by the laboratory. After logging, core samples were identified and then cut in half along the core axis in the same building and then zip tied individually in plastic sample bags with a bar code. Approximately five or six of these individual bags were then stacked into a “rice” white material bag and stored on a skid for final shipment to the laboratory. All core samples were shipped to the ALS facility in Thunder Bay, Ontario, which were then prepared by ALS Global Geochemistry in Thunder Bay and analyzed by ALS Global Analytical Lab in North Vancouver, British Columbia. Samples are processed by 4-acid digestion and analyzed by fire assay on 50 g pulps and ICP-AES (Inductively Coupled Plasma – Atomic Emission Spectroscopy). Over limit analyses are reprocessed with gravimetric finish. A total of 5% blanks and 5% standards are inserted randomly within all samples. 5% of the best assay result pulps were sent for re-assays. All QA/QC results were verified, and no contamination or bias was observed.”

Apparent Width Onlynegative

Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.

Why it applies: The document explicitly states that 'All Core lengths are drilled thicknesses; true widths have not yet been determined.'

Evidence · text

“Note: All Core lengths are drilled thicknesses; true widths have not yet been determined.”

Cut-off Disclosedpositive · Story-specific tag

Cut-off grade used for resource reporting is clearly stated, enabling like-for-like comparison.

Why it applies: The document states that 'Intervals are calculated using a nominal cut-off'.

Evidence · text

“Intervals are calculated using a nominal cut-off and may include internal dilution;”

Step-Out Extensionpositive

Mineralization extended beyond the previously known limit.

Why it applies: LBX26-110 encountered unexpected deeper intervals, providing new geological information for potential follow-up evaluation.

Evidence · text

“In addition to intersecting the anticipated River Zone, the hole encountered a 9.90 m gold-bearing interval from 205.70 m to 215.60 m associated with silicification of a shear zone and possible disseminated pyrite, as well as a separate 6.00 m gold-bearing interval from 238.00 m to 244.00 m near the contact with the pluton. These deeper intervals were unexpected and provide new geological information for potential follow-up evaluation in the future.”

Infill Drillingneutral

Confirmatory drilling to raise resource confidence, not new discovery.

Why it applies: The 2026 Phase 1 drill program is described as including 'targeted infill, expansion and exploration drilling' to advance the A-Zone.

Evidence · text

“Through targeted infill, expansion and exploration drilling, LAURION’s 2026 Phase 1 drill program is designed to systematically advance the A-Zone, which may support the evaluation of a potential maiden Mineral Resource Estimate (“MRE”).”

Extracted facts

Stored fact records: 87. Some facts used in scoring do not have a stored record.

Drill Results (87)

LBX26-109underexplored areas of the mineralized · goldGrade: 0.67Grade Unit: g/tIntercept: 1.2 mView all details
Link to this fact

Identity

Hole ID
LBX26-109
Project
underexplored areas of the mineralized
Commodity
gold
Region
canada_on
Reported Region
canada_on
Ticker
LME

Geometry

Grade
0.67
Grade Unit
g/t
Intercept
1.2 m
From
17.9 m
To
19.1 m
Hole Depth
307 m
Intercept Depth
17.9 m

Classification

Program
mixed
Sample Type
drill
Group ID
LBX26-109:17.9-19.1
Mining Method
unknown

Location

Easting
446084
Northing
5513178
Elevation
321 m
Azimuth
317 °
Dip
-46 °
Loc. Confidence
high
Loc. Source
document

QA/QC

Laboratory
ALS
QA/QC Disclosed
Yes
QP Signed
Yes
QA/QC Methods
standards, blanks, duplicates

Compositing

Dilution Disclosed
Yes

Review

Needs Review
No
Interp. Status
scored
Historical
No

Dates

Event date
2026-09-22T00:00:00.000Z

Reasoning: A low-grade gold intercept that contributes to the overall geological understanding, but is not individually significant. The lack of true width is a minor negative.

Positive factors

  • Intercept contributes to the understanding of the mineralized system in the A-Zone.
  • QA/QC protocols are disclosed, enhancing confidence in the results.

Negative factors

  • Gold grade (0.67 g/t) is below the moderate threshold for orogenic gold (1 g/t).
  • True width has not been determined, potentially overstating the intercept length.

Evidence · table

“0.670”

Context: 1.20

Tags used in scoring

QA/QC Disclosedpositive

Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).

Why it applies: qaqc_disclosed is true

Cut-off Undisclosednegative

High-grade interval reported without stating the cut-off grade used for compositing.

Why it applies: no cutoff_grade was stated

Infill Drillingneutral

Confirmatory drilling to raise resource confidence, not new discovery.

Why it applies: drill_program_type is "mixed"

LBX26-109underexplored areas of the mineralized · silverGrade: 1.52Grade Unit: g/tIntercept: 1.2 mView all details
Link to this fact

Identity

Hole ID
LBX26-109
Project
underexplored areas of the mineralized
Commodity
silver
Region
canada_on
Reported Region
canada_on
Ticker
LME

Geometry

Grade
1.52
Grade Unit
g/t
Intercept
1.2 m
From
17.9 m
To
19.1 m
Hole Depth
307 m
Intercept Depth
17.9 m

Classification

Program
mixed
Sample Type
drill
Group ID
LBX26-109:17.9-19.1
Mining Method
unknown

Location

Easting
446084
Northing
5513178
Elevation
321 m
Azimuth
317 °
Dip
-46 °
Loc. Confidence
high
Loc. Source
document

QA/QC

Laboratory
ALS
QA/QC Disclosed
Yes
QP Signed
Yes
QA/QC Methods
standards, blanks, duplicates

Compositing

Dilution Disclosed
Yes

Review

Needs Review
No
Interp. Status
scored
Historical
No

Dates

Event date
2026-09-22T00:00:00.000Z

Reasoning: A very low-grade silver intercept with limited materiality. The lack of true width is a minor negative.

Positive factors

  • QA/QC protocols are disclosed, enhancing confidence in the results.

Negative factors

  • Silver grade (1.52 g/t) is very low and not economically significant.
  • True width has not been determined, potentially overstating the intercept length.

Evidence · table

“1.52”

Context: 1.20

Tags used in scoring

QA/QC Disclosedpositive

Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).

Why it applies: qaqc_disclosed is true

Cut-off Undisclosednegative

High-grade interval reported without stating the cut-off grade used for compositing.

Why it applies: no cutoff_grade was stated

Infill Drillingneutral

Confirmatory drilling to raise resource confidence, not new discovery.

Why it applies: drill_program_type is "mixed"

LBX26-109underexplored areas of the mineralized · copperGrade: 0.04Grade Unit: %Intercept: 1.2 mView all details
Link to this fact

Identity

Hole ID
LBX26-109
Project
underexplored areas of the mineralized
Commodity
copper
Region
canada_on
Reported Region
canada_on
Ticker
LME

Geometry

Grade
0.04
Grade Unit
%
Intercept
1.2 m
From
17.9 m
To
19.1 m
Hole Depth
307 m
Intercept Depth
17.9 m

Classification

Program
mixed
Sample Type
drill
Group ID
LBX26-109:17.9-19.1
Mining Method
unknown

Location

Easting
446084
Northing
5513178
Elevation
321 m
Azimuth
317 °
Dip
-46 °
Loc. Confidence
high
Loc. Source
document

QA/QC

Laboratory
ALS
QA/QC Disclosed
Yes
QP Signed
Yes
QA/QC Methods
standards, blanks, duplicates

Compositing

Dilution Disclosed
Yes

Review

Needs Review
No
Interp. Status
scored
Historical
No

Dates

Event date
2026-09-22T00:00:00.000Z

Reasoning: A very low-grade copper intercept with limited materiality. The lack of true width is a minor negative.

Positive factors

  • QA/QC protocols are disclosed, enhancing confidence in the results.

Negative factors

  • Copper grade (0.04%) is very low and not economically significant.
  • True width has not been determined, potentially overstating the intercept length.

Evidence · table

“0.04”

Context: 1.20

Tags used in scoring

QA/QC Disclosedpositive

Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).

Why it applies: qaqc_disclosed is true

Cut-off Undisclosednegative

High-grade interval reported without stating the cut-off grade used for compositing.

Why it applies: no cutoff_grade was stated

Infill Drillingneutral

Confirmatory drilling to raise resource confidence, not new discovery.

Why it applies: drill_program_type is "mixed"

LBX26-109underexplored areas of the mineralized · zincGrade: 0.87Grade Unit: %Intercept: 1.2 mView all details
Link to this fact

Identity

Hole ID
LBX26-109
Project
underexplored areas of the mineralized
Commodity
zinc
Region
canada_on
Reported Region
canada_on
Ticker
LME

Geometry

Grade
0.87
Grade Unit
%
Intercept
1.2 m
From
17.9 m
To
19.1 m
Hole Depth
307 m
Intercept Depth
17.9 m

Classification

Program
mixed
Sample Type
drill
Group ID
LBX26-109:17.9-19.1
Mining Method
unknown

Location

Easting
446084
Northing
5513178
Elevation
321 m
Azimuth
317 °
Dip
-46 °
Loc. Confidence
high
Loc. Source
document

QA/QC

Laboratory
ALS
QA/QC Disclosed
Yes
QP Signed
Yes
QA/QC Methods
standards, blanks, duplicates

Compositing

Dilution Disclosed
Yes

Review

Needs Review
No
Interp. Status
scored
Historical
No

Dates

Event date
2026-09-22T00:00:00.000Z

Reasoning: A very low-grade zinc intercept with limited materiality. The lack of true width is a minor negative.

Positive factors

  • QA/QC protocols are disclosed, enhancing confidence in the results.

Negative factors

  • Zinc grade (0.87%) is below the weak threshold for zinc (2%).
  • True width has not been determined, potentially overstating the intercept length.

Evidence · table

“0.87”

Context: 1.20

Tags used in scoring

QA/QC Disclosedpositive

Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).

Why it applies: qaqc_disclosed is true

Cut-off Undisclosednegative

High-grade interval reported without stating the cut-off grade used for compositing.

Why it applies: no cutoff_grade was stated

Infill Drillingneutral

Confirmatory drilling to raise resource confidence, not new discovery.

Why it applies: drill_program_type is "mixed"

LBX26-109underexplored areas of the mineralized · goldGrade: 0.156Grade Unit: g/tIntercept: 0.5 mView all details
Link to this fact

Identity

Hole ID
LBX26-109
Project
underexplored areas of the mineralized
Commodity
gold
Region
canada_on
Reported Region
canada_on
Ticker
LME

Geometry

Grade
0.156
Grade Unit
g/t
Intercept
0.5 m
From
17.9 m
To
18.4 m
Hole Depth
307 m
Intercept Depth
17.9 m

Classification

Program
mixed
Sample Type
drill
Group ID
LBX26-109:17.9-18.4
Mining Method
unknown

Location

Easting
446084
Northing
5513178
Elevation
321 m
Azimuth
317 °
Dip
-46 °
Loc. Confidence
high
Loc. Source
document

QA/QC

Laboratory
ALS
QA/QC Disclosed
Yes
QP Signed
Yes
QA/QC Methods
standards, blanks, duplicates

Compositing

Dilution Disclosed
Yes

Review

Needs Review
No
Interp. Status
scored
Historical
No

Dates

Event date
2026-09-22T00:00:00.000Z

Reasoning: A very low-grade gold sub-interval with limited materiality. The lack of true width is a minor negative.

Positive factors

  • QA/QC protocols are disclosed, enhancing confidence in the results.

Negative factors

  • Gold grade (0.156 g/t) is very low and not economically significant.
  • True width has not been determined, potentially overstating the intercept length.

Evidence · table

“0.156”

Context: 0.50

Tags used in scoring

QA/QC Disclosedpositive

Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).

Why it applies: qaqc_disclosed is true

Cut-off Undisclosednegative

High-grade interval reported without stating the cut-off grade used for compositing.

Why it applies: no cutoff_grade was stated

Infill Drillingneutral

Confirmatory drilling to raise resource confidence, not new discovery.

Why it applies: drill_program_type is "mixed"

LBX26-109underexplored areas of the mineralized · silverGrade: 3.3Grade Unit: g/tIntercept: 0.5 mView all details
Link to this fact

Identity

Hole ID
LBX26-109
Project
underexplored areas of the mineralized
Commodity
silver
Region
canada_on
Reported Region
canada_on
Ticker
LME

Geometry

Grade
3.3
Grade Unit
g/t
Intercept
0.5 m
From
17.9 m
To
18.4 m
Hole Depth
307 m
Intercept Depth
17.9 m

Classification

Program
mixed
Sample Type
drill
Group ID
LBX26-109:17.9-18.4
Mining Method
unknown

Location

Easting
446084
Northing
5513178
Elevation
321 m
Azimuth
317 °
Dip
-46 °
Loc. Confidence
high
Loc. Source
document

QA/QC

Laboratory
ALS
QA/QC Disclosed
Yes
QP Signed
Yes
QA/QC Methods
standards, blanks, duplicates

Compositing

Dilution Disclosed
Yes

Review

Needs Review
No
Interp. Status
scored
Historical
No

Dates

Event date
2026-09-22T00:00:00.000Z

Reasoning: A very low-grade silver sub-interval with limited materiality. The lack of true width is a minor negative.

Positive factors

  • QA/QC protocols are disclosed, enhancing confidence in the results.

Negative factors

  • Silver grade (3.30 g/t) is very low and not economically significant.
  • True width has not been determined, potentially overstating the intercept length.

Evidence · table

“3.30”

Context: 0.50

Tags used in scoring

QA/QC Disclosedpositive

Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).

Why it applies: qaqc_disclosed is true

Cut-off Undisclosednegative

High-grade interval reported without stating the cut-off grade used for compositing.

Why it applies: no cutoff_grade was stated

Infill Drillingneutral

Confirmatory drilling to raise resource confidence, not new discovery.

Why it applies: drill_program_type is "mixed"

LBX26-109underexplored areas of the mineralized · copperGrade: 0.07Grade Unit: %Intercept: 0.5 mView all details
Link to this fact

Identity

Hole ID
LBX26-109
Project
underexplored areas of the mineralized
Commodity
copper
Region
canada_on
Reported Region
canada_on
Ticker
LME

Geometry

Grade
0.07
Grade Unit
%
Intercept
0.5 m
From
17.9 m
To
18.4 m
Hole Depth
307 m
Intercept Depth
17.9 m

Classification

Program
mixed
Sample Type
drill
Group ID
LBX26-109:17.9-18.4
Mining Method
unknown

Location

Easting
446084
Northing
5513178
Elevation
321 m
Azimuth
317 °
Dip
-46 °
Loc. Confidence
high
Loc. Source
document

QA/QC

Laboratory
ALS
QA/QC Disclosed
Yes
QP Signed
Yes
QA/QC Methods
standards, blanks, duplicates

Compositing

Dilution Disclosed
Yes

Review

Needs Review
No
Interp. Status
scored
Historical
No

Dates

Event date
2026-09-22T00:00:00.000Z

Reasoning: A very low-grade copper sub-interval with limited materiality. The lack of true width is a minor negative.

Positive factors

  • QA/QC protocols are disclosed, enhancing confidence in the results.

Negative factors

  • Copper grade (0.07%) is very low and not economically significant.
  • True width has not been determined, potentially overstating the intercept length.

Evidence · table

“0.07”

Context: 0.50

Tags used in scoring

QA/QC Disclosedpositive

Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).

Why it applies: qaqc_disclosed is true

Cut-off Undisclosednegative

High-grade interval reported without stating the cut-off grade used for compositing.

Why it applies: no cutoff_grade was stated

Infill Drillingneutral

Confirmatory drilling to raise resource confidence, not new discovery.

Why it applies: drill_program_type is "mixed"

LBX26-109underexplored areas of the mineralized · zincGrade: 1.61Grade Unit: %Intercept: 0.5 mView all details
Link to this fact

Identity

Hole ID
LBX26-109
Project
underexplored areas of the mineralized
Commodity
zinc
Region
canada_on
Reported Region
canada_on
Ticker
LME

Geometry

Grade
1.61
Grade Unit
%
Intercept
0.5 m
From
17.9 m
To
18.4 m
Hole Depth
307 m
Intercept Depth
17.9 m

Classification

Program
mixed
Sample Type
drill
Group ID
LBX26-109:17.9-18.4
Mining Method
unknown

Location

Easting
446084
Northing
5513178
Elevation
321 m
Azimuth
317 °
Dip
-46 °
Loc. Confidence
high
Loc. Source
document

QA/QC

Laboratory
ALS
QA/QC Disclosed
Yes
QP Signed
Yes
QA/QC Methods
standards, blanks, duplicates

Compositing

Dilution Disclosed
Yes

Review

Needs Review
No
Interp. Status
scored
Historical
No

Dates

Event date
2026-09-22T00:00:00.000Z

Reasoning: A very low-grade zinc sub-interval with limited materiality. The lack of true width is a minor negative.

Positive factors

  • QA/QC protocols are disclosed, enhancing confidence in the results.

Negative factors

  • Zinc grade (1.61%) is below the weak threshold for zinc (2%).
  • True width has not been determined, potentially overstating the intercept length.

Evidence · table

“1.61”

Context: 0.50

Tags used in scoring

QA/QC Disclosedpositive

Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).

Why it applies: qaqc_disclosed is true

Cut-off Undisclosednegative

High-grade interval reported without stating the cut-off grade used for compositing.

Why it applies: no cutoff_grade was stated

Infill Drillingneutral

Confirmatory drilling to raise resource confidence, not new discovery.

Why it applies: drill_program_type is "mixed"

LBX26-109underexplored areas of the mineralized · goldGrade: 0.144Grade Unit: g/tIntercept: 0.5 mView all details
Link to this fact

Identity

Hole ID
LBX26-109
Project
underexplored areas of the mineralized
Commodity
gold
Region
canada_on
Reported Region
canada_on
Ticker
LME

Geometry

Grade
0.144
Grade Unit
g/t
Intercept
0.5 m
From
26.2 m
To
26.7 m
Hole Depth
307 m
Intercept Depth
26.2 m

Classification

Program
mixed
Sample Type
drill
Group ID
LBX26-109:26.2-26.7
Mining Method
unknown

Location

Easting
446084
Northing
5513178
Elevation
321 m
Azimuth
317 °
Dip
-46 °
Loc. Confidence
high
Loc. Source
document

QA/QC

Laboratory
ALS
QA/QC Disclosed
Yes
QP Signed
Yes
QA/QC Methods
standards, blanks, duplicates

Compositing

Dilution Disclosed
Yes

Review

Needs Review
No
Interp. Status
scored
Historical
No

Dates

Event date
2026-09-22T00:00:00.000Z

Reasoning: A very low-grade gold intercept with limited materiality. The lack of true width is a minor negative.

Positive factors

  • QA/QC protocols are disclosed, enhancing confidence in the results.

Negative factors

  • Gold grade (0.144 g/t) is very low and not economically significant.
  • True width has not been determined, potentially overstating the intercept length.

Evidence · table

“0.144”

Context: 0.50

Tags used in scoring

QA/QC Disclosedpositive

Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).

Why it applies: qaqc_disclosed is true

Cut-off Undisclosednegative

High-grade interval reported without stating the cut-off grade used for compositing.

Why it applies: no cutoff_grade was stated

Infill Drillingneutral

Confirmatory drilling to raise resource confidence, not new discovery.

Why it applies: drill_program_type is "mixed"

LBX26-109underexplored areas of the mineralized · silverGrade: 14.3Grade Unit: g/tIntercept: 0.5 mView all details
Link to this fact

Identity

Hole ID
LBX26-109
Project
underexplored areas of the mineralized
Commodity
silver
Region
canada_on
Reported Region
canada_on
Ticker
LME

Geometry

Grade
14.3
Grade Unit
g/t
Intercept
0.5 m
From
26.2 m
To
26.7 m
Hole Depth
307 m
Intercept Depth
26.2 m

Classification

Program
mixed
Sample Type
drill
Group ID
LBX26-109:26.2-26.7
Mining Method
unknown

Location

Easting
446084
Northing
5513178
Elevation
321 m
Azimuth
317 °
Dip
-46 °
Loc. Confidence
high
Loc. Source
document

QA/QC

Laboratory
ALS
QA/QC Disclosed
Yes
QP Signed
Yes
QA/QC Methods
standards, blanks, duplicates

Compositing

Dilution Disclosed
Yes

Review

Needs Review
No
Interp. Status
scored
Historical
No

Dates

Event date
2026-09-22T00:00:00.000Z

Reasoning: A low-grade silver intercept with limited materiality. The lack of true width is a minor negative.

Positive factors

  • QA/QC protocols are disclosed, enhancing confidence in the results.

Negative factors

  • Silver grade (14.30 g/t) is below the weak threshold for silver (30 g/t).
  • True width has not been determined, potentially overstating the intercept length.

Evidence · table

“14.30”

Context: 0.50

Tags used in scoring

QA/QC Disclosedpositive

Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).

Why it applies: qaqc_disclosed is true

Cut-off Undisclosednegative

High-grade interval reported without stating the cut-off grade used for compositing.

Why it applies: no cutoff_grade was stated

Infill Drillingneutral

Confirmatory drilling to raise resource confidence, not new discovery.

Why it applies: drill_program_type is "mixed"

LBX26-109underexplored areas of the mineralized · copperGrade: 0.13Grade Unit: %Intercept: 0.5 mView all details
Link to this fact

Identity

Hole ID
LBX26-109
Project
underexplored areas of the mineralized
Commodity
copper
Region
canada_on
Reported Region
canada_on
Ticker
LME

Geometry

Grade
0.13
Grade Unit
%
Intercept
0.5 m
From
26.2 m
To
26.7 m
Hole Depth
307 m
Intercept Depth
26.2 m

Classification

Program
mixed
Sample Type
drill
Group ID
LBX26-109:26.2-26.7
Mining Method
unknown

Location

Easting
446084
Northing
5513178
Elevation
321 m
Azimuth
317 °
Dip
-46 °
Loc. Confidence
high
Loc. Source
document

QA/QC

Laboratory
ALS
QA/QC Disclosed
Yes
QP Signed
Yes
QA/QC Methods
standards, blanks, duplicates

Compositing

Dilution Disclosed
Yes

Review

Needs Review
No
Interp. Status
scored
Historical
No

Dates

Event date
2026-09-22T00:00:00.000Z

Reasoning: A low-grade copper intercept with limited materiality. The lack of true width is a minor negative.

Positive factors

  • QA/QC protocols are disclosed, enhancing confidence in the results.

Negative factors

  • Copper grade (0.13%) is below the weak threshold for copper (0.25%).
  • True width has not been determined, potentially overstating the intercept length.

Evidence · table

“0.13”

Context: 0.50

Tags used in scoring

QA/QC Disclosedpositive

Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).

Why it applies: qaqc_disclosed is true

Cut-off Undisclosednegative

High-grade interval reported without stating the cut-off grade used for compositing.

Why it applies: no cutoff_grade was stated

Infill Drillingneutral

Confirmatory drilling to raise resource confidence, not new discovery.

Why it applies: drill_program_type is "mixed"

LBX26-109underexplored areas of the mineralized · zincGrade: 0.03Grade Unit: %Intercept: 0.5 mView all details
Link to this fact

Identity

Hole ID
LBX26-109
Project
underexplored areas of the mineralized
Commodity
zinc
Region
canada_on
Reported Region
canada_on
Ticker
LME

Geometry

Grade
0.03
Grade Unit
%
Intercept
0.5 m
From
26.2 m
To
26.7 m
Hole Depth
307 m
Intercept Depth
26.2 m

Classification

Program
mixed
Sample Type
drill
Group ID
LBX26-109:26.2-26.7
Mining Method
unknown

Location

Easting
446084
Northing
5513178
Elevation
321 m
Azimuth
317 °
Dip
-46 °
Loc. Confidence
high
Loc. Source
document

QA/QC

Laboratory
ALS
QA/QC Disclosed
Yes
QP Signed
Yes
QA/QC Methods
standards, blanks, duplicates

Compositing

Dilution Disclosed
Yes

Review

Needs Review
No
Interp. Status
scored
Historical
No

Dates

Event date
2026-09-22T00:00:00.000Z

Reasoning: A very low-grade zinc intercept with limited materiality. The lack of true width is a minor negative.

Positive factors

  • QA/QC protocols are disclosed, enhancing confidence in the results.

Negative factors

  • Zinc grade (0.03%) is very low and not economically significant.
  • True width has not been determined, potentially overstating the intercept length.

Evidence · table

“0.03”

Context: 0.50

Tags used in scoring

QA/QC Disclosedpositive

Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).

Why it applies: qaqc_disclosed is true

Cut-off Undisclosednegative

High-grade interval reported without stating the cut-off grade used for compositing.

Why it applies: no cutoff_grade was stated

Infill Drillingneutral

Confirmatory drilling to raise resource confidence, not new discovery.

Why it applies: drill_program_type is "mixed"

LBX26-109underexplored areas of the mineralized · goldGrade: 0.284Grade Unit: g/tIntercept: 0.55 mView all details
Link to this fact

Identity

Hole ID
LBX26-109
Project
underexplored areas of the mineralized
Commodity
gold
Region
canada_on
Reported Region
canada_on
Ticker
LME

Geometry

Grade
0.284
Grade Unit
g/t
Intercept
0.55 m
From
236.65 m
To
237.2 m
Hole Depth
307 m
Intercept Depth
236.65 m

Classification

Program
mixed
Sample Type
drill
Group ID
LBX26-109:236.65-237.2
Mining Method
unknown

Location

Easting
446084
Northing
5513178
Elevation
321 m
Azimuth
317 °
Dip
-46 °
Loc. Confidence
high
Loc. Source
document

QA/QC

Laboratory
ALS
QA/QC Disclosed
Yes
QP Signed
Yes
QA/QC Methods
standards, blanks, duplicates

Compositing

Dilution Disclosed
Yes

Review

Needs Review
No
Interp. Status
scored
Historical
No

Dates

Event date
2026-09-22T00:00:00.000Z

Reasoning: A very low-grade gold intercept with limited materiality. The lack of true width is a minor negative.

Positive factors

  • QA/QC protocols are disclosed, enhancing confidence in the results.

Negative factors

  • Gold grade (0.284 g/t) is below the weak threshold for orogenic gold (0.3 g/t).
  • True width has not been determined, potentially overstating the intercept length.

Evidence · table

“0.284”

Context: 0.55

Tags used in scoring

QA/QC Disclosedpositive

Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).

Why it applies: qaqc_disclosed is true

Cut-off Undisclosednegative

High-grade interval reported without stating the cut-off grade used for compositing.

Why it applies: no cutoff_grade was stated

Infill Drillingneutral

Confirmatory drilling to raise resource confidence, not new discovery.

Why it applies: drill_program_type is "mixed"

LBX26-109underexplored areas of the mineralized · silverGrade: 0.25Grade Unit: g/tIntercept: 0.55 mView all details
Link to this fact

Identity

Hole ID
LBX26-109
Project
underexplored areas of the mineralized
Commodity
silver
Region
canada_on
Reported Region
canada_on
Ticker
LME

Geometry

Grade
0.25
Grade Unit
g/t
Intercept
0.55 m
From
236.65 m
To
237.2 m
Hole Depth
307 m
Intercept Depth
236.65 m

Classification

Program
mixed
Sample Type
drill
Group ID
LBX26-109:236.65-237.2
Mining Method
unknown

Location

Easting
446084
Northing
5513178
Elevation
321 m
Azimuth
317 °
Dip
-46 °
Loc. Confidence
high
Loc. Source
document

QA/QC

Laboratory
ALS
QA/QC Disclosed
Yes
QP Signed
Yes
QA/QC Methods
standards, blanks, duplicates

Compositing

Dilution Disclosed
Yes

Review

Needs Review
No
Interp. Status
scored
Historical
No

Dates

Event date
2026-09-22T00:00:00.000Z

Reasoning: A very low-grade silver intercept with limited materiality. The lack of true width is a minor negative.

Positive factors

  • QA/QC protocols are disclosed, enhancing confidence in the results.

Negative factors

  • Silver grade (0.25 g/t) is very low and not economically significant.
  • True width has not been determined, potentially overstating the intercept length.

Evidence · table

“0.25”

Context: 0.55

Tags used in scoring

QA/QC Disclosedpositive

Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).

Why it applies: qaqc_disclosed is true

Cut-off Undisclosednegative

High-grade interval reported without stating the cut-off grade used for compositing.

Why it applies: no cutoff_grade was stated

Infill Drillingneutral

Confirmatory drilling to raise resource confidence, not new discovery.

Why it applies: drill_program_type is "mixed"

LBX26-109underexplored areas of the mineralized · zincGrade: 0.03Grade Unit: %Intercept: 0.55 mView all details
Link to this fact

Identity

Hole ID
LBX26-109
Project
underexplored areas of the mineralized
Commodity
zinc
Region
canada_on
Reported Region
canada_on
Ticker
LME

Geometry

Grade
0.03
Grade Unit
%
Intercept
0.55 m
From
236.65 m
To
237.2 m
Hole Depth
307 m
Intercept Depth
236.65 m

Classification

Program
mixed
Sample Type
drill
Group ID
LBX26-109:236.65-237.2
Mining Method
unknown

Location

Easting
446084
Northing
5513178
Elevation
321 m
Azimuth
317 °
Dip
-46 °
Loc. Confidence
high
Loc. Source
document

QA/QC

Laboratory
ALS
QA/QC Disclosed
Yes
QP Signed
Yes
QA/QC Methods
standards, blanks, duplicates

Compositing

Dilution Disclosed
Yes

Review

Needs Review
No
Interp. Status
scored
Historical
No

Dates

Event date
2026-09-22T00:00:00.000Z

Reasoning: A very low-grade zinc intercept with limited materiality. The lack of true width is a minor negative.

Positive factors

  • QA/QC protocols are disclosed, enhancing confidence in the results.

Negative factors

  • Zinc grade (0.03%) is very low and not economically significant.
  • True width has not been determined, potentially overstating the intercept length.

Evidence · table

“0.03”

Context: 0.55

Tags used in scoring

QA/QC Disclosedpositive

Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).

Why it applies: qaqc_disclosed is true

Cut-off Undisclosednegative

High-grade interval reported without stating the cut-off grade used for compositing.

Why it applies: no cutoff_grade was stated

Infill Drillingneutral

Confirmatory drilling to raise resource confidence, not new discovery.

Why it applies: drill_program_type is "mixed"

LBX26-110Ishkōday · goldGrade: 1.26Grade Unit: g/tIntercept: 0.8 mView all details
Link to this fact

Identity

Hole ID
LBX26-110
Project
Ishkōday
Commodity
gold
Region
canada_on
Reported Region
canada_on
Ticker
LME

Geometry

Grade
1.26
Grade Unit
g/t
Intercept
0.8 m
From
12.9 m
To
13.7 m
Hole Depth
246 m
Intercept Depth
12.9 m

Classification

Program
mixed
Sample Type
drill
Group ID
LBX26-110:12.9-13.7
Mining Method
unknown

Location

Easting
446106
Northing
5513334
Elevation
322 m
Azimuth
328 °
Dip
-50 °
Loc. Confidence
high
Loc. Source
document

QA/QC

Laboratory
ALS
QA/QC Disclosed
Yes
QP Signed
Yes
QA/QC Methods
standards, blanks, duplicates

Compositing

Dilution Disclosed
Yes

Review

Needs Review
No
Interp. Status
scored
Historical
No

Dates

Event date
2026-09-22T00:00:00.000Z

Reasoning: A narrow but moderate-grade gold intercept that adds to the understanding of the mineralized system. The lack of true width is a minor negative.

Positive factors

  • Gold grade (1.26 g/t) is above the moderate threshold for orogenic gold (1 g/t).
  • QA/QC protocols are disclosed, enhancing confidence in the results.

Negative factors

  • Intercept length (0.8 m) is narrow.
  • True width has not been determined, potentially overstating the intercept length.

Evidence · table

“1.260”

Context: 0.80

Tags used in scoring

QA/QC Disclosedpositive

Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).

Why it applies: qaqc_disclosed is true

Cut-off Undisclosednegative

High-grade interval reported without stating the cut-off grade used for compositing.

Why it applies: no cutoff_grade was stated

Infill Drillingneutral

Confirmatory drilling to raise resource confidence, not new discovery.

Why it applies: drill_program_type is "mixed"

LBX26-110Ishkōday · silverGrade: 0.7Grade Unit: g/tIntercept: 0.8 mView all details
Link to this fact

Identity

Hole ID
LBX26-110
Project
Ishkōday
Commodity
silver
Region
canada_on
Reported Region
canada_on
Ticker
LME

Geometry

Grade
0.7
Grade Unit
g/t
Intercept
0.8 m
From
12.9 m
To
13.7 m
Hole Depth
246 m
Intercept Depth
12.9 m

Classification

Program
mixed
Sample Type
drill
Group ID
LBX26-110:12.9-13.7
Mining Method
unknown

Location

Easting
446106
Northing
5513334
Elevation
322 m
Azimuth
328 °
Dip
-50 °
Loc. Confidence
high
Loc. Source
document

QA/QC

Laboratory
ALS
QA/QC Disclosed
Yes
QP Signed
Yes
QA/QC Methods
standards, blanks, duplicates

Compositing

Dilution Disclosed
Yes

Review

Needs Review
No
Interp. Status
scored
Historical
No

Dates

Event date
2026-09-22T00:00:00.000Z

Reasoning: A very low-grade silver intercept with limited materiality. The lack of true width is a minor negative.

Positive factors

  • QA/QC protocols are disclosed, enhancing confidence in the results.

Negative factors

  • Silver grade (0.70 g/t) is very low and not economically significant.
  • True width has not been determined, potentially overstating the intercept length.

Evidence · table

“0.70”

Context: 0.80

Tags used in scoring

QA/QC Disclosedpositive

Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).

Why it applies: qaqc_disclosed is true

Cut-off Undisclosednegative

High-grade interval reported without stating the cut-off grade used for compositing.

Why it applies: no cutoff_grade was stated

Infill Drillingneutral

Confirmatory drilling to raise resource confidence, not new discovery.

Why it applies: drill_program_type is "mixed"

LBX26-110Ishkōday · copperGrade: 0.01Grade Unit: %Intercept: 0.8 mView all details
Link to this fact

Identity

Hole ID
LBX26-110
Project
Ishkōday
Commodity
copper
Region
canada_on
Reported Region
canada_on
Ticker
LME

Geometry

Grade
0.01
Grade Unit
%
Intercept
0.8 m
From
12.9 m
To
13.7 m
Hole Depth
246 m
Intercept Depth
12.9 m

Classification

Program
mixed
Sample Type
drill
Group ID
LBX26-110:12.9-13.7
Mining Method
unknown

Location

Easting
446106
Northing
5513334
Elevation
322 m
Azimuth
328 °
Dip
-50 °
Loc. Confidence
high
Loc. Source
document

QA/QC

Laboratory
ALS
QA/QC Disclosed
Yes
QP Signed
Yes
QA/QC Methods
standards, blanks, duplicates

Compositing

Dilution Disclosed
Yes

Review

Needs Review
No
Interp. Status
scored
Historical
No

Dates

Event date
2026-09-22T00:00:00.000Z

Reasoning: A very low-grade copper intercept with limited materiality. The lack of true width is a minor negative.

Positive factors

  • QA/QC protocols are disclosed, enhancing confidence in the results.

Negative factors

  • Copper grade (0.01%) is very low and not economically significant.
  • True width has not been determined, potentially overstating the intercept length.

Evidence · table

“0.01”

Context: 0.80

Tags used in scoring

QA/QC Disclosedpositive

Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).

Why it applies: qaqc_disclosed is true

Cut-off Undisclosednegative

High-grade interval reported without stating the cut-off grade used for compositing.

Why it applies: no cutoff_grade was stated

Infill Drillingneutral

Confirmatory drilling to raise resource confidence, not new discovery.

Why it applies: drill_program_type is "mixed"

LBX26-110Ishkōday · zincGrade: 0.01Grade Unit: %Intercept: 0.8 mView all details
Link to this fact

Identity

Hole ID
LBX26-110
Project
Ishkōday
Commodity
zinc
Region
canada_on
Reported Region
canada_on
Ticker
LME

Geometry

Grade
0.01
Grade Unit
%
Intercept
0.8 m
From
12.9 m
To
13.7 m
Hole Depth
246 m
Intercept Depth
12.9 m

Classification

Program
mixed
Sample Type
drill
Group ID
LBX26-110:12.9-13.7
Mining Method
unknown

Location

Easting
446106
Northing
5513334
Elevation
322 m
Azimuth
328 °
Dip
-50 °
Loc. Confidence
high
Loc. Source
document

QA/QC

Laboratory
ALS
QA/QC Disclosed
Yes
QP Signed
Yes
QA/QC Methods
standards, blanks, duplicates

Compositing

Dilution Disclosed
Yes

Review

Needs Review
No
Interp. Status
scored
Historical
No

Dates

Event date
2026-09-22T00:00:00.000Z

Reasoning: A very low-grade zinc intercept with limited materiality. The lack of true width is a minor negative.

Positive factors

  • QA/QC protocols are disclosed, enhancing confidence in the results.

Negative factors

  • Zinc grade (0.01%) is very low and not economically significant.
  • True width has not been determined, potentially overstating the intercept length.

Evidence · table

“0.01”

Context: 0.80

Tags used in scoring

QA/QC Disclosedpositive

Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).

Why it applies: qaqc_disclosed is true

Cut-off Undisclosednegative

High-grade interval reported without stating the cut-off grade used for compositing.

Why it applies: no cutoff_grade was stated

Infill Drillingneutral

Confirmatory drilling to raise resource confidence, not new discovery.

Why it applies: drill_program_type is "mixed"

LBX26-110Ishkōday · goldGrade: 0.414Grade Unit: g/tIntercept: 0.7 mView all details
Link to this fact

Identity

Hole ID
LBX26-110
Project
Ishkōday
Commodity
gold
Region
canada_on
Reported Region
canada_on
Ticker
LME

Geometry

Grade
0.414
Grade Unit
g/t
Intercept
0.7 m
From
25.8 m
To
26.5 m
Hole Depth
246 m
Intercept Depth
25.8 m

Classification

Program
mixed
Sample Type
drill
Group ID
LBX26-110:25.8-26.5
Mining Method
unknown

Location

Easting
446106
Northing
5513334
Elevation
322 m
Azimuth
328 °
Dip
-50 °
Loc. Confidence
high
Loc. Source
document

QA/QC

Laboratory
ALS
QA/QC Disclosed
Yes
QP Signed
Yes
QA/QC Methods
standards, blanks, duplicates

Compositing

Dilution Disclosed
Yes

Review

Needs Review
No
Interp. Status
scored
Historical
No

Dates

Event date
2026-09-22T00:00:00.000Z

Reasoning: A narrow, weak-grade gold intercept that contributes to the overall geological understanding. The lack of true width is a minor negative.

Positive factors

  • Gold grade (0.414 g/t) is above the weak threshold for orogenic gold (0.3 g/t).
  • QA/QC protocols are disclosed, enhancing confidence in the results.

Negative factors

  • Intercept length (0.7 m) is narrow.
  • True width has not been determined, potentially overstating the intercept length.

Evidence · table

“0.414”

Context: 0.70

Tags used in scoring

QA/QC Disclosedpositive

Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).

Why it applies: qaqc_disclosed is true

Cut-off Undisclosednegative

High-grade interval reported without stating the cut-off grade used for compositing.

Why it applies: no cutoff_grade was stated

Infill Drillingneutral

Confirmatory drilling to raise resource confidence, not new discovery.

Why it applies: drill_program_type is "mixed"

LBX26-110Ishkōday · silverGrade: 0.5Grade Unit: g/tIntercept: 0.7 mView all details
Link to this fact

Identity

Hole ID
LBX26-110
Project
Ishkōday
Commodity
silver
Region
canada_on
Reported Region
canada_on
Ticker
LME

Geometry

Grade
0.5
Grade Unit
g/t
Intercept
0.7 m
From
25.8 m
To
26.5 m
Hole Depth
246 m
Intercept Depth
25.8 m

Classification

Program
mixed
Sample Type
drill
Group ID
LBX26-110:25.8-26.5
Mining Method
unknown

Location

Easting
446106
Northing
5513334
Elevation
322 m
Azimuth
328 °
Dip
-50 °
Loc. Confidence
high
Loc. Source
document

QA/QC

Laboratory
ALS
QA/QC Disclosed
Yes
QP Signed
Yes
QA/QC Methods
standards, blanks, duplicates

Compositing

Dilution Disclosed
Yes

Review

Needs Review
No
Interp. Status
scored
Historical
No

Dates

Event date
2026-09-22T00:00:00.000Z

Reasoning: A very low-grade silver intercept with limited materiality. The lack of true width is a minor negative.

Positive factors

  • QA/QC protocols are disclosed, enhancing confidence in the results.

Negative factors

  • Silver grade (0.50 g/t) is very low and not economically significant.
  • True width has not been determined, potentially overstating the intercept length.

Evidence · table

“0.50”

Context: 0.70

Tags used in scoring

QA/QC Disclosedpositive

Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).

Why it applies: qaqc_disclosed is true

Cut-off Undisclosednegative

High-grade interval reported without stating the cut-off grade used for compositing.

Why it applies: no cutoff_grade was stated

Infill Drillingneutral

Confirmatory drilling to raise resource confidence, not new discovery.

Why it applies: drill_program_type is "mixed"

LBX26-110Ishkōday · copperGrade: 0.02Grade Unit: %Intercept: 0.7 mView all details
Link to this fact

Identity

Hole ID
LBX26-110
Project
Ishkōday
Commodity
copper
Region
canada_on
Reported Region
canada_on
Ticker
LME

Geometry

Grade
0.02
Grade Unit
%
Intercept
0.7 m
From
25.8 m
To
26.5 m
Hole Depth
246 m
Intercept Depth
25.8 m

Classification

Program
mixed
Sample Type
drill
Group ID
LBX26-110:25.8-26.5
Mining Method
unknown

Location

Easting
446106
Northing
5513334
Elevation
322 m
Azimuth
328 °
Dip
-50 °
Loc. Confidence
high
Loc. Source
document

QA/QC

Laboratory
ALS
QA/QC Disclosed
Yes
QP Signed
Yes
QA/QC Methods
standards, blanks, duplicates

Compositing

Dilution Disclosed
Yes

Review

Needs Review
No
Interp. Status
scored
Historical
No

Dates

Event date
2026-09-22T00:00:00.000Z

Reasoning: A very low-grade copper intercept with limited materiality. The lack of true width is a minor negative.

Positive factors

  • QA/QC protocols are disclosed, enhancing confidence in the results.

Negative factors

  • Copper grade (0.02%) is very low and not economically significant.
  • True width has not been determined, potentially overstating the intercept length.

Evidence · table

“0.02”

Context: 0.70

Tags used in scoring

QA/QC Disclosedpositive

Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).

Why it applies: qaqc_disclosed is true

Cut-off Undisclosednegative

High-grade interval reported without stating the cut-off grade used for compositing.

Why it applies: no cutoff_grade was stated

Infill Drillingneutral

Confirmatory drilling to raise resource confidence, not new discovery.

Why it applies: drill_program_type is "mixed"

LBX26-110Ishkōday · zincGrade: 0.01Grade Unit: %Intercept: 0.7 mView all details
Link to this fact

Identity

Hole ID
LBX26-110
Project
Ishkōday
Commodity
zinc
Region
canada_on
Reported Region
canada_on
Ticker
LME

Geometry

Grade
0.01
Grade Unit
%
Intercept
0.7 m
From
25.8 m
To
26.5 m
Hole Depth
246 m
Intercept Depth
25.8 m

Classification

Program
mixed
Sample Type
drill
Group ID
LBX26-110:25.8-26.5
Mining Method
unknown

Location

Easting
446106
Northing
5513334
Elevation
322 m
Azimuth
328 °
Dip
-50 °
Loc. Confidence
high
Loc. Source
document

QA/QC

Laboratory
ALS
QA/QC Disclosed
Yes
QP Signed
Yes
QA/QC Methods
standards, blanks, duplicates

Compositing

Dilution Disclosed
Yes

Review

Needs Review
No
Interp. Status
scored
Historical
No

Dates

Event date
2026-09-22T00:00:00.000Z

Reasoning: A very low-grade zinc intercept with limited materiality. The lack of true width is a minor negative.

Positive factors

  • QA/QC protocols are disclosed, enhancing confidence in the results.

Negative factors

  • Zinc grade (0.01%) is very low and not economically significant.
  • True width has not been determined, potentially overstating the intercept length.

Evidence · table

“0.01”

Context: 0.70

Tags used in scoring

QA/QC Disclosedpositive

Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).

Why it applies: qaqc_disclosed is true

Cut-off Undisclosednegative

High-grade interval reported without stating the cut-off grade used for compositing.

Why it applies: no cutoff_grade was stated

Infill Drillingneutral

Confirmatory drilling to raise resource confidence, not new discovery.

Why it applies: drill_program_type is "mixed"

LBX26-110Ishkōday · goldGrade: 0.272Grade Unit: g/tIntercept: 2.8 mView all details
Link to this fact

Identity

Hole ID
LBX26-110
Project
Ishkōday
Commodity
gold
Region
canada_on
Reported Region
canada_on
Ticker
LME

Geometry

Grade
0.272
Grade Unit
g/t
Intercept
2.8 m
From
29.6 m
To
32.4 m
Hole Depth
246 m
Intercept Depth
29.6 m

Classification

Program
mixed
Sample Type
drill
Group ID
LBX26-110:29.6-32.4
Mining Method
unknown

Location

Easting
446106
Northing
5513334
Elevation
322 m
Azimuth
328 °
Dip
-50 °
Loc. Confidence
high
Loc. Source
document

QA/QC

Laboratory
ALS
QA/QC Disclosed
Yes
QP Signed
Yes
QA/QC Methods
standards, blanks, duplicates

Compositing

Dilution Disclosed
Yes

Review

Needs Review
No
Interp. Status
scored
Historical
No

Dates

Event date
2026-09-22T00:00:00.000Z

Reasoning: A low-grade gold intercept with limited materiality. The lack of true width is a minor negative.

Positive factors

  • QA/QC protocols are disclosed, enhancing confidence in the results.

Negative factors

  • Gold grade (0.272 g/t) is below the weak threshold for orogenic gold (0.3 g/t).
  • True width has not been determined, potentially overstating the intercept length.

Evidence · table

“0.272”

Context: 2.80

Tags used in scoring

QA/QC Disclosedpositive

Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).

Why it applies: qaqc_disclosed is true

Cut-off Undisclosednegative

High-grade interval reported without stating the cut-off grade used for compositing.

Why it applies: no cutoff_grade was stated

Infill Drillingneutral

Confirmatory drilling to raise resource confidence, not new discovery.

Why it applies: drill_program_type is "mixed"

LBX26-110Ishkōday · silverGrade: 0.91Grade Unit: g/tIntercept: 2.8 mView all details
Link to this fact

Identity

Hole ID
LBX26-110
Project
Ishkōday
Commodity
silver
Region
canada_on
Reported Region
canada_on
Ticker
LME

Geometry

Grade
0.91
Grade Unit
g/t
Intercept
2.8 m
From
29.6 m
To
32.4 m
Hole Depth
246 m
Intercept Depth
29.6 m

Classification

Program
mixed
Sample Type
drill
Group ID
LBX26-110:29.6-32.4
Mining Method
unknown

Location

Easting
446106
Northing
5513334
Elevation
322 m
Azimuth
328 °
Dip
-50 °
Loc. Confidence
high
Loc. Source
document

QA/QC

Laboratory
ALS
QA/QC Disclosed
Yes
QP Signed
Yes
QA/QC Methods
standards, blanks, duplicates

Compositing

Dilution Disclosed
Yes

Review

Needs Review
No
Interp. Status
scored
Historical
No

Dates

Event date
2026-09-22T00:00:00.000Z

Reasoning: A very low-grade silver intercept with limited materiality. The lack of true width is a minor negative.

Positive factors

  • QA/QC protocols are disclosed, enhancing confidence in the results.

Negative factors

  • Silver grade (0.91 g/t) is very low and not economically significant.
  • True width has not been determined, potentially overstating the intercept length.

Evidence · table

“0.91”

Context: 2.80

Tags used in scoring

QA/QC Disclosedpositive

Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).

Why it applies: qaqc_disclosed is true

Cut-off Undisclosednegative

High-grade interval reported without stating the cut-off grade used for compositing.

Why it applies: no cutoff_grade was stated

Infill Drillingneutral

Confirmatory drilling to raise resource confidence, not new discovery.

Why it applies: drill_program_type is "mixed"

LBX26-110Ishkōday · copperGrade: 0.01Grade Unit: %Intercept: 2.8 mView all details
Link to this fact

Identity

Hole ID
LBX26-110
Project
Ishkōday
Commodity
copper
Region
canada_on
Reported Region
canada_on
Ticker
LME

Geometry

Grade
0.01
Grade Unit
%
Intercept
2.8 m
From
29.6 m
To
32.4 m
Hole Depth
246 m
Intercept Depth
29.6 m

Classification

Program
mixed
Sample Type
drill
Group ID
LBX26-110:29.6-32.4
Mining Method
unknown

Location

Easting
446106
Northing
5513334
Elevation
322 m
Azimuth
328 °
Dip
-50 °
Loc. Confidence
high
Loc. Source
document

QA/QC

Laboratory
ALS
QA/QC Disclosed
Yes
QP Signed
Yes
QA/QC Methods
standards, blanks, duplicates

Compositing

Dilution Disclosed
Yes

Review

Needs Review
No
Interp. Status
scored
Historical
No

Dates

Event date
2026-09-22T00:00:00.000Z

Reasoning: A very low-grade copper intercept with limited materiality. The lack of true width is a minor negative.

Positive factors

  • QA/QC protocols are disclosed, enhancing confidence in the results.

Negative factors

  • Copper grade (0.01%) is very low and not economically significant.
  • True width has not been determined, potentially overstating the intercept length.

Evidence · table

“0.01”

Context: 2.80

Tags used in scoring

QA/QC Disclosedpositive

Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).

Why it applies: qaqc_disclosed is true

Cut-off Undisclosednegative

High-grade interval reported without stating the cut-off grade used for compositing.

Why it applies: no cutoff_grade was stated

Infill Drillingneutral

Confirmatory drilling to raise resource confidence, not new discovery.

Why it applies: drill_program_type is "mixed"

LBX26-110Ishkōday · zincGrade: 0.01Grade Unit: %Intercept: 2.8 mView all details
Link to this fact

Identity

Hole ID
LBX26-110
Project
Ishkōday
Commodity
zinc
Region
canada_on
Reported Region
canada_on
Ticker
LME

Geometry

Grade
0.01
Grade Unit
%
Intercept
2.8 m
From
29.6 m
To
32.4 m
Hole Depth
246 m
Intercept Depth
29.6 m

Classification

Program
mixed
Sample Type
drill
Group ID
LBX26-110:29.6-32.4
Mining Method
unknown

Location

Easting
446106
Northing
5513334
Elevation
322 m
Azimuth
328 °
Dip
-50 °
Loc. Confidence
high
Loc. Source
document

QA/QC

Laboratory
ALS
QA/QC Disclosed
Yes
QP Signed
Yes
QA/QC Methods
standards, blanks, duplicates

Compositing

Dilution Disclosed
Yes

Review

Needs Review
No
Interp. Status
scored
Historical
No

Dates

Event date
2026-09-22T00:00:00.000Z

Reasoning: A very low-grade zinc intercept with limited materiality. The lack of true width is a minor negative.

Positive factors

  • QA/QC protocols are disclosed, enhancing confidence in the results.

Negative factors

  • Zinc grade (0.01%) is very low and not economically significant.
  • True width has not been determined, potentially overstating the intercept length.

Evidence · table

“0.01”

Context: 2.80

Tags used in scoring

QA/QC Disclosedpositive

Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).

Why it applies: qaqc_disclosed is true

Cut-off Undisclosednegative

High-grade interval reported without stating the cut-off grade used for compositing.

Why it applies: no cutoff_grade was stated

Infill Drillingneutral

Confirmatory drilling to raise resource confidence, not new discovery.

Why it applies: drill_program_type is "mixed"

LBX26-110Ishkōday · goldGrade: 0.658Grade Unit: g/tIntercept: 0.5 mView all details
Link to this fact

Identity

Hole ID
LBX26-110
Project
Ishkōday
Commodity
gold
Region
canada_on
Reported Region
canada_on
Ticker
LME

Geometry

Grade
0.658
Grade Unit
g/t
Intercept
0.5 m
From
31.3 m
To
31.8 m
Hole Depth
246 m
Intercept Depth
31.3 m

Classification

Program
mixed
Sample Type
drill
Group ID
LBX26-110:31.3-31.8
Mining Method
unknown

Location

Easting
446106
Northing
5513334
Elevation
322 m
Azimuth
328 °
Dip
-50 °
Loc. Confidence
high
Loc. Source
document

QA/QC

Laboratory
ALS
QA/QC Disclosed
Yes
QP Signed
Yes
QA/QC Methods
standards, blanks, duplicates

Compositing

Dilution Disclosed
Yes

Review

Needs Review
No
Interp. Status
scored
Historical
No

Dates

Event date
2026-09-22T00:00:00.000Z

Reasoning: A narrow, weak-grade gold sub-interval that contributes to the overall geological understanding. The lack of true width is a minor negative.

Positive factors

  • Gold grade (0.658 g/t) is above the weak threshold for orogenic gold (0.3 g/t).
  • QA/QC protocols are disclosed, enhancing confidence in the results.

Negative factors

  • Intercept length (0.5 m) is narrow.
  • True width has not been determined, potentially overstating the intercept length.

Evidence · table

“0.658”

Context: 0.50

Tags used in scoring

QA/QC Disclosedpositive

Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).

Why it applies: qaqc_disclosed is true

Cut-off Undisclosednegative

High-grade interval reported without stating the cut-off grade used for compositing.

Why it applies: no cutoff_grade was stated

Infill Drillingneutral

Confirmatory drilling to raise resource confidence, not new discovery.

Why it applies: drill_program_type is "mixed"

LBX26-110Ishkōday · silverGrade: 0.6Grade Unit: g/tIntercept: 0.5 mView all details
Link to this fact

Identity

Hole ID
LBX26-110
Project
Ishkōday
Commodity
silver
Region
canada_on
Reported Region
canada_on
Ticker
LME

Geometry

Grade
0.6
Grade Unit
g/t
Intercept
0.5 m
From
31.3 m
To
31.8 m
Hole Depth
246 m
Intercept Depth
31.3 m

Classification

Program
mixed
Sample Type
drill
Group ID
LBX26-110:31.3-31.8
Mining Method
unknown

Location

Easting
446106
Northing
5513334
Elevation
322 m
Azimuth
328 °
Dip
-50 °
Loc. Confidence
high
Loc. Source
document

QA/QC

Laboratory
ALS
QA/QC Disclosed
Yes
QP Signed
Yes
QA/QC Methods
standards, blanks, duplicates

Compositing

Dilution Disclosed
Yes

Review

Needs Review
No
Interp. Status
scored
Historical
No

Dates

Event date
2026-09-22T00:00:00.000Z

Reasoning: A very low-grade silver sub-interval with limited materiality. The lack of true width is a minor negative.

Positive factors

  • QA/QC protocols are disclosed, enhancing confidence in the results.

Negative factors

  • Silver grade (0.60 g/t) is very low and not economically significant.
  • True width has not been determined, potentially overstating the intercept length.

Evidence · table

“0.60”

Context: 0.50

Tags used in scoring

QA/QC Disclosedpositive

Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).

Why it applies: qaqc_disclosed is true

Cut-off Undisclosednegative

High-grade interval reported without stating the cut-off grade used for compositing.

Why it applies: no cutoff_grade was stated

Infill Drillingneutral

Confirmatory drilling to raise resource confidence, not new discovery.

Why it applies: drill_program_type is "mixed"

LBX26-110Ishkōday · zincGrade: 0.01Grade Unit: %Intercept: 0.5 mView all details
Link to this fact

Identity

Hole ID
LBX26-110
Project
Ishkōday
Commodity
zinc
Region
canada_on
Reported Region
canada_on
Ticker
LME

Geometry

Grade
0.01
Grade Unit
%
Intercept
0.5 m
From
31.3 m
To
31.8 m
Hole Depth
246 m
Intercept Depth
31.3 m

Classification

Program
mixed
Sample Type
drill
Group ID
LBX26-110:31.3-31.8
Mining Method
unknown

Location

Easting
446106
Northing
5513334
Elevation
322 m
Azimuth
328 °
Dip
-50 °
Loc. Confidence
high
Loc. Source
document

QA/QC

Laboratory
ALS
QA/QC Disclosed
Yes
QP Signed
Yes
QA/QC Methods
standards, blanks, duplicates

Compositing

Dilution Disclosed
Yes

Review

Needs Review
No
Interp. Status
scored
Historical
No

Dates

Event date
2026-09-22T00:00:00.000Z

Reasoning: A very low-grade zinc sub-interval with limited materiality. The lack of true width is a minor negative.

Positive factors

  • QA/QC protocols are disclosed, enhancing confidence in the results.

Negative factors

  • Zinc grade (0.01%) is very low and not economically significant.
  • True width has not been determined, potentially overstating the intercept length.

Evidence · table

“0.01”

Context: 0.50

Tags used in scoring

QA/QC Disclosedpositive

Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).

Why it applies: qaqc_disclosed is true

Cut-off Undisclosednegative

High-grade interval reported without stating the cut-off grade used for compositing.

Why it applies: no cutoff_grade was stated

Infill Drillingneutral

Confirmatory drilling to raise resource confidence, not new discovery.

Why it applies: drill_program_type is "mixed"

LBX26-110Ishkōday · goldGrade: 0.072Grade Unit: g/tIntercept: 4.4 mView all details
Link to this fact

Identity

Hole ID
LBX26-110
Project
Ishkōday
Commodity
gold
Region
canada_on
Reported Region
canada_on
Ticker
LME

Geometry

Grade
0.072
Grade Unit
g/t
Intercept
4.4 m
From
37.3 m
To
41.7 m
Hole Depth
246 m
Intercept Depth
37.3 m

Classification

Program
mixed
Sample Type
drill
Group ID
LBX26-110:37.3-41.7
Mining Method
unknown

Location

Easting
446106
Northing
5513334
Elevation
322 m
Azimuth
328 °
Dip
-50 °
Loc. Confidence
high
Loc. Source
document

QA/QC

Laboratory
ALS
QA/QC Disclosed
Yes
QP Signed
Yes
QA/QC Methods
standards, blanks, duplicates

Compositing

Dilution Disclosed
Yes

Review

Needs Review
No
Interp. Status
scored
Historical
No

Dates

Event date
2026-09-22T00:00:00.000Z

Reasoning: A very low-grade gold intercept with limited materiality. The lack of true width is a minor negative.

Positive factors

  • QA/QC protocols are disclosed, enhancing confidence in the results.

Negative factors

  • Gold grade (0.072 g/t) is very low and not economically significant.
  • True width has not been determined, potentially overstating the intercept length.

Evidence · table

“0.072”

Context: 4.40

Tags used in scoring

QA/QC Disclosedpositive

Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).

Why it applies: qaqc_disclosed is true

Cut-off Undisclosednegative

High-grade interval reported without stating the cut-off grade used for compositing.

Why it applies: no cutoff_grade was stated

Infill Drillingneutral

Confirmatory drilling to raise resource confidence, not new discovery.

Why it applies: drill_program_type is "mixed"

LBX26-110Ishkōday · silverGrade: 2.35Grade Unit: g/tIntercept: 4.4 mView all details
Link to this fact

Identity

Hole ID
LBX26-110
Project
Ishkōday
Commodity
silver
Region
canada_on
Reported Region
canada_on
Ticker
LME

Geometry

Grade
2.35
Grade Unit
g/t
Intercept
4.4 m
From
37.3 m
To
41.7 m
Hole Depth
246 m
Intercept Depth
37.3 m

Classification

Program
mixed
Sample Type
drill
Group ID
LBX26-110:37.3-41.7
Mining Method
unknown

Location

Easting
446106
Northing
5513334
Elevation
322 m
Azimuth
328 °
Dip
-50 °
Loc. Confidence
high
Loc. Source
document

QA/QC

Laboratory
ALS
QA/QC Disclosed
Yes
QP Signed
Yes
QA/QC Methods
standards, blanks, duplicates

Compositing

Dilution Disclosed
Yes

Review

Needs Review
No
Interp. Status
scored
Historical
No

Dates

Event date
2026-09-22T00:00:00.000Z

Reasoning: A very low-grade silver intercept with limited materiality. The lack of true width is a minor negative.

Positive factors

  • QA/QC protocols are disclosed, enhancing confidence in the results.

Negative factors

  • Silver grade (2.35 g/t) is very low and not economically significant.
  • True width has not been determined, potentially overstating the intercept length.

Evidence · table

“2.35”

Context: 4.40

Tags used in scoring

QA/QC Disclosedpositive

Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).

Why it applies: qaqc_disclosed is true

Cut-off Undisclosednegative

High-grade interval reported without stating the cut-off grade used for compositing.

Why it applies: no cutoff_grade was stated

Infill Drillingneutral

Confirmatory drilling to raise resource confidence, not new discovery.

Why it applies: drill_program_type is "mixed"

LBX26-110Ishkōday · copperGrade: 0.45Grade Unit: %Intercept: 4.4 mView all details
Link to this fact

Identity

Hole ID
LBX26-110
Project
Ishkōday
Commodity
copper
Region
canada_on
Reported Region
canada_on
Ticker
LME

Geometry

Grade
0.45
Grade Unit
%
Intercept
4.4 m
From
37.3 m
To
41.7 m
Hole Depth
246 m
Intercept Depth
37.3 m

Classification

Program
mixed
Sample Type
drill
Group ID
LBX26-110:37.3-41.7
Mining Method
unknown

Location

Easting
446106
Northing
5513334
Elevation
322 m
Azimuth
328 °
Dip
-50 °
Loc. Confidence
high
Loc. Source
document

QA/QC

Laboratory
ALS
QA/QC Disclosed
Yes
QP Signed
Yes
QA/QC Methods
standards, blanks, duplicates

Compositing

Dilution Disclosed
Yes

Review

Needs Review
No
Interp. Status
scored
Historical
No

Dates

Event date
2026-09-22T00:00:00.000Z

Reasoning: A weak-grade copper intercept that contributes to the overall geological understanding. The lack of true width is a minor negative.

Positive factors

  • Copper grade (0.45%) is above the weak threshold for copper (0.25%).
  • QA/QC protocols are disclosed, enhancing confidence in the results.

Negative factors

  • True width has not been determined, potentially overstating the intercept length.

Evidence · table

“0.45”

Context: 4.40

Tags used in scoring

QA/QC Disclosedpositive

Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).

Why it applies: qaqc_disclosed is true

Cut-off Undisclosednegative

High-grade interval reported without stating the cut-off grade used for compositing.

Why it applies: no cutoff_grade was stated

Infill Drillingneutral

Confirmatory drilling to raise resource confidence, not new discovery.

Why it applies: drill_program_type is "mixed"

LBX26-110Ishkōday · zincGrade: 0.02Grade Unit: %Intercept: 4.4 mView all details
Link to this fact

Identity

Hole ID
LBX26-110
Project
Ishkōday
Commodity
zinc
Region
canada_on
Reported Region
canada_on
Ticker
LME

Geometry

Grade
0.02
Grade Unit
%
Intercept
4.4 m
From
37.3 m
To
41.7 m
Hole Depth
246 m
Intercept Depth
37.3 m

Classification

Program
mixed
Sample Type
drill
Group ID
LBX26-110:37.3-41.7
Mining Method
unknown

Location

Easting
446106
Northing
5513334
Elevation
322 m
Azimuth
328 °
Dip
-50 °
Loc. Confidence
high
Loc. Source
document

QA/QC

Laboratory
ALS
QA/QC Disclosed
Yes
QP Signed
Yes
QA/QC Methods
standards, blanks, duplicates

Compositing

Dilution Disclosed
Yes

Review

Needs Review
No
Interp. Status
scored
Historical
No

Dates

Event date
2026-09-22T00:00:00.000Z

Reasoning: A very low-grade zinc intercept with limited materiality. The lack of true width is a minor negative.

Positive factors

  • QA/QC protocols are disclosed, enhancing confidence in the results.

Negative factors

  • Zinc grade (0.02%) is very low and not economically significant.
  • True width has not been determined, potentially overstating the intercept length.

Evidence · table

“0.02”

Context: 4.40

Tags used in scoring

QA/QC Disclosedpositive

Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).

Why it applies: qaqc_disclosed is true

Cut-off Undisclosednegative

High-grade interval reported without stating the cut-off grade used for compositing.

Why it applies: no cutoff_grade was stated

Infill Drillingneutral

Confirmatory drilling to raise resource confidence, not new discovery.

Why it applies: drill_program_type is "mixed"

LBX26-110Ishkōday · goldGrade: 0.149Grade Unit: g/tIntercept: 1.55 mView all details
Link to this fact

Identity

Hole ID
LBX26-110
Project
Ishkōday
Commodity
gold
Region
canada_on
Reported Region
canada_on
Ticker
LME

Geometry

Grade
0.149
Grade Unit
g/t
Intercept
1.55 m
From
39.55 m
To
41.1 m
Hole Depth
246 m
Intercept Depth
39.55 m

Classification

Program
mixed
Sample Type
drill
Group ID
LBX26-110:39.55-41.1
Mining Method
unknown

Location

Easting
446106
Northing
5513334
Elevation
322 m
Azimuth
328 °
Dip
-50 °
Loc. Confidence
high
Loc. Source
document

QA/QC

Laboratory
ALS
QA/QC Disclosed
Yes
QP Signed
Yes
QA/QC Methods
standards, blanks, duplicates

Compositing

Dilution Disclosed
Yes

Review

Needs Review
No
Interp. Status
scored
Historical
No

Dates

Event date
2026-09-22T00:00:00.000Z

Reasoning: A very low-grade gold sub-interval with limited materiality. The lack of true width is a minor negative.

Positive factors

  • QA/QC protocols are disclosed, enhancing confidence in the results.

Negative factors

  • Gold grade (0.149 g/t) is very low and not economically significant.
  • True width has not been determined, potentially overstating the intercept length.

Evidence · table

“0.149”

Context: 1.55

Tags used in scoring

QA/QC Disclosedpositive

Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).

Why it applies: qaqc_disclosed is true

Cut-off Undisclosednegative

High-grade interval reported without stating the cut-off grade used for compositing.

Why it applies: no cutoff_grade was stated

Infill Drillingneutral

Confirmatory drilling to raise resource confidence, not new discovery.

Why it applies: drill_program_type is "mixed"

LBX26-110Ishkōday · silverGrade: 4.86Grade Unit: g/tIntercept: 1.55 mView all details
Link to this fact

Identity

Hole ID
LBX26-110
Project
Ishkōday
Commodity
silver
Region
canada_on
Reported Region
canada_on
Ticker
LME

Geometry

Grade
4.86
Grade Unit
g/t
Intercept
1.55 m
From
39.55 m
To
41.1 m
Hole Depth
246 m
Intercept Depth
39.55 m

Classification

Program
mixed
Sample Type
drill
Group ID
LBX26-110:39.55-41.1
Mining Method
unknown

Location

Easting
446106
Northing
5513334
Elevation
322 m
Azimuth
328 °
Dip
-50 °
Loc. Confidence
high
Loc. Source
document

QA/QC

Laboratory
ALS
QA/QC Disclosed
Yes
QP Signed
Yes
QA/QC Methods
standards, blanks, duplicates

Compositing

Dilution Disclosed
Yes

Review

Needs Review
No
Interp. Status
scored
Historical
No

Dates

Event date
2026-09-22T00:00:00.000Z

Reasoning: A very low-grade silver sub-interval with limited materiality. The lack of true width is a minor negative.

Positive factors

  • QA/QC protocols are disclosed, enhancing confidence in the results.

Negative factors

  • Silver grade (4.86 g/t) is very low and not economically significant.
  • True width has not been determined, potentially overstating the intercept length.

Evidence · table

“4.86”

Context: 1.55

Tags used in scoring

QA/QC Disclosedpositive

Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).

Why it applies: qaqc_disclosed is true

Cut-off Undisclosednegative

High-grade interval reported without stating the cut-off grade used for compositing.

Why it applies: no cutoff_grade was stated

Infill Drillingneutral

Confirmatory drilling to raise resource confidence, not new discovery.

Why it applies: drill_program_type is "mixed"

LBX26-110Ishkōday · copperGrade: 0.87Grade Unit: %Intercept: 1.55 mView all details
Link to this fact

Identity

Hole ID
LBX26-110
Project
Ishkōday
Commodity
copper
Region
canada_on
Reported Region
canada_on
Ticker
LME

Geometry

Grade
0.87
Grade Unit
%
Intercept
1.55 m
From
39.55 m
To
41.1 m
Hole Depth
246 m
Intercept Depth
39.55 m

Classification

Program
mixed
Sample Type
drill
Group ID
LBX26-110:39.55-41.1
Mining Method
unknown

Location

Easting
446106
Northing
5513334
Elevation
322 m
Azimuth
328 °
Dip
-50 °
Loc. Confidence
high
Loc. Source
document

QA/QC

Laboratory
ALS
QA/QC Disclosed
Yes
QP Signed
Yes
QA/QC Methods
standards, blanks, duplicates

Compositing

Dilution Disclosed
Yes

Review

Needs Review
No
Interp. Status
scored
Historical
No

Dates

Event date
2026-09-22T00:00:00.000Z

Reasoning: A moderate-grade copper sub-interval that adds to the understanding of the mineralized system. The lack of true width is a minor negative.

Positive factors

  • Copper grade (0.87%) is approaching the strong threshold for copper (1%).
  • QA/QC protocols are disclosed, enhancing confidence in the results.

Negative factors

  • True width has not been determined, potentially overstating the intercept length.

Evidence · table

“0.87”

Context: 1.55

Tags used in scoring

QA/QC Disclosedpositive

Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).

Why it applies: qaqc_disclosed is true

Cut-off Undisclosednegative

High-grade interval reported without stating the cut-off grade used for compositing.

Why it applies: no cutoff_grade was stated

Infill Drillingneutral

Confirmatory drilling to raise resource confidence, not new discovery.

Why it applies: drill_program_type is "mixed"

LBX26-110Ishkōday · zincGrade: 0.01Grade Unit: %Intercept: 1.55 mView all details
Link to this fact

Identity

Hole ID
LBX26-110
Project
Ishkōday
Commodity
zinc
Region
canada_on
Reported Region
canada_on
Ticker
LME

Geometry

Grade
0.01
Grade Unit
%
Intercept
1.55 m
From
39.55 m
To
41.1 m
Hole Depth
246 m
Intercept Depth
39.55 m

Classification

Program
mixed
Sample Type
drill
Group ID
LBX26-110:39.55-41.1
Mining Method
unknown

Location

Easting
446106
Northing
5513334
Elevation
322 m
Azimuth
328 °
Dip
-50 °
Loc. Confidence
high
Loc. Source
document

QA/QC

Laboratory
ALS
QA/QC Disclosed
Yes
QP Signed
Yes
QA/QC Methods
standards, blanks, duplicates

Compositing

Dilution Disclosed
Yes

Review

Needs Review
No
Interp. Status
scored
Historical
No

Dates

Event date
2026-09-22T00:00:00.000Z

Reasoning: A very low-grade zinc sub-interval with limited materiality. The lack of true width is a minor negative.

Positive factors

  • QA/QC protocols are disclosed, enhancing confidence in the results.

Negative factors

  • Zinc grade (0.01%) is very low and not economically significant.
  • True width has not been determined, potentially overstating the intercept length.

Evidence · table

“0.01”

Context: 1.55

Tags used in scoring

QA/QC Disclosedpositive

Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).

Why it applies: qaqc_disclosed is true

Cut-off Undisclosednegative

High-grade interval reported without stating the cut-off grade used for compositing.

Why it applies: no cutoff_grade was stated

Infill Drillingneutral

Confirmatory drilling to raise resource confidence, not new discovery.

Why it applies: drill_program_type is "mixed"

LBX26-110Ishkōday · goldGrade: 0.201Grade Unit: g/tIntercept: 0.55 mView all details
Link to this fact

Identity

Hole ID
LBX26-110
Project
Ishkōday
Commodity
gold
Region
canada_on
Reported Region
canada_on
Ticker
LME

Geometry

Grade
0.201
Grade Unit
g/t
Intercept
0.55 m
From
40.05 m
To
40.6 m
Hole Depth
246 m
Intercept Depth
40.05 m

Classification

Program
mixed
Sample Type
drill
Group ID
LBX26-110:40.05-40.6
Mining Method
unknown

Location

Easting
446106
Northing
5513334
Elevation
322 m
Azimuth
328 °
Dip
-50 °
Loc. Confidence
high
Loc. Source
document

QA/QC

Laboratory
ALS
QA/QC Disclosed
Yes
QP Signed
Yes
QA/QC Methods
standards, blanks, duplicates

Compositing

Dilution Disclosed
Yes

Review

Needs Review
No
Interp. Status
scored
Historical
No

Dates

Event date
2026-09-22T00:00:00.000Z

Reasoning: A very low-grade gold sub-interval with limited materiality. The lack of true width is a minor negative.

Positive factors

  • QA/QC protocols are disclosed, enhancing confidence in the results.

Negative factors

  • Gold grade (0.201 g/t) is very low and not economically significant.
  • True width has not been determined, potentially overstating the intercept length.

Evidence · table

“0.201”

Context: 0.55

Tags used in scoring

QA/QC Disclosedpositive

Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).

Why it applies: qaqc_disclosed is true

Cut-off Undisclosednegative

High-grade interval reported without stating the cut-off grade used for compositing.

Why it applies: no cutoff_grade was stated

Infill Drillingneutral

Confirmatory drilling to raise resource confidence, not new discovery.

Why it applies: drill_program_type is "mixed"

LBX26-110Ishkōday · silverGrade: 7.8Grade Unit: g/tIntercept: 0.55 mView all details
Link to this fact

Identity

Hole ID
LBX26-110
Project
Ishkōday
Commodity
silver
Region
canada_on
Reported Region
canada_on
Ticker
LME

Geometry

Grade
7.8
Grade Unit
g/t
Intercept
0.55 m
From
40.05 m
To
40.6 m
Hole Depth
246 m
Intercept Depth
40.05 m

Classification

Program
mixed
Sample Type
drill
Group ID
LBX26-110:40.05-40.6
Mining Method
unknown

Location

Easting
446106
Northing
5513334
Elevation
322 m
Azimuth
328 °
Dip
-50 °
Loc. Confidence
high
Loc. Source
document

QA/QC

Laboratory
ALS
QA/QC Disclosed
Yes
QP Signed
Yes
QA/QC Methods
standards, blanks, duplicates

Compositing

Dilution Disclosed
Yes

Review

Needs Review
No
Interp. Status
scored
Historical
No

Dates

Event date
2026-09-22T00:00:00.000Z

Reasoning: A low-grade silver sub-interval with limited materiality. The lack of true width is a minor negative.

Positive factors

  • QA/QC protocols are disclosed, enhancing confidence in the results.

Negative factors

  • Silver grade (7.80 g/t) is below the weak threshold for silver (30 g/t).
  • True width has not been determined, potentially overstating the intercept length.

Evidence · table

“7.80”

Context: 0.55

Tags used in scoring

QA/QC Disclosedpositive

Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).

Why it applies: qaqc_disclosed is true

Cut-off Undisclosednegative

High-grade interval reported without stating the cut-off grade used for compositing.

Why it applies: no cutoff_grade was stated

Infill Drillingneutral

Confirmatory drilling to raise resource confidence, not new discovery.

Why it applies: drill_program_type is "mixed"

LBX26-110Ishkōday · copperGrade: 1.57Grade Unit: %Intercept: 0.55 mView all details
Link to this fact

Identity

Hole ID
LBX26-110
Project
Ishkōday
Commodity
copper
Region
canada_on
Reported Region
canada_on
Ticker
LME

Geometry

Grade
1.57
Grade Unit
%
Intercept
0.55 m
From
40.05 m
To
40.6 m
Hole Depth
246 m
Intercept Depth
40.05 m

Classification

Program
mixed
Sample Type
drill
Group ID
LBX26-110:40.05-40.6
Mining Method
unknown

Location

Easting
446106
Northing
5513334
Elevation
322 m
Azimuth
328 °
Dip
-50 °
Loc. Confidence
high
Loc. Source
document

QA/QC

Laboratory
ALS
QA/QC Disclosed
Yes
QP Signed
Yes
QA/QC Methods
standards, blanks, duplicates

Compositing

Dilution Disclosed
Yes

Review

Needs Review
No
Interp. Status
scored
Historical
No

Dates

Event date
2026-09-22T00:00:00.000Z

Reasoning: A narrow but strong-grade copper sub-interval that is a positive indicator for polymetallic mineralization. The lack of true width is a minor negative.

Positive factors

  • Copper grade (1.57%) is strong for copper (threshold 1%).
  • QA/QC protocols are disclosed, enhancing confidence in the results.

Negative factors

  • Intercept length (0.55 m) is narrow.
  • True width has not been determined, potentially overstating the intercept length.

Evidence · table

“1.57”

Context: 0.55

Tags used in scoring

QA/QC Disclosedpositive

Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).

Why it applies: qaqc_disclosed is true

Cut-off Undisclosednegative

High-grade interval reported without stating the cut-off grade used for compositing.

Why it applies: no cutoff_grade was stated

Infill Drillingneutral

Confirmatory drilling to raise resource confidence, not new discovery.

Why it applies: drill_program_type is "mixed"

LBX26-110Ishkōday · zincGrade: 0.01Grade Unit: %Intercept: 0.55 mView all details
Link to this fact

Identity

Hole ID
LBX26-110
Project
Ishkōday
Commodity
zinc
Region
canada_on
Reported Region
canada_on
Ticker
LME

Geometry

Grade
0.01
Grade Unit
%
Intercept
0.55 m
From
40.05 m
To
40.6 m
Hole Depth
246 m
Intercept Depth
40.05 m

Classification

Program
mixed
Sample Type
drill
Group ID
LBX26-110:40.05-40.6
Mining Method
unknown

Location

Easting
446106
Northing
5513334
Elevation
322 m
Azimuth
328 °
Dip
-50 °
Loc. Confidence
high
Loc. Source
document

QA/QC

Laboratory
ALS
QA/QC Disclosed
Yes
QP Signed
Yes
QA/QC Methods
standards, blanks, duplicates

Compositing

Dilution Disclosed
Yes

Review

Needs Review
No
Interp. Status
scored
Historical
No

Dates

Event date
2026-09-22T00:00:00.000Z

Reasoning: A very low-grade zinc sub-interval with limited materiality. The lack of true width is a minor negative.

Positive factors

  • QA/QC protocols are disclosed, enhancing confidence in the results.

Negative factors

  • Zinc grade (0.01%) is very low and not economically significant.
  • True width has not been determined, potentially overstating the intercept length.

Evidence · table

“0.01”

Context: 0.55

Tags used in scoring

QA/QC Disclosedpositive

Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).

Why it applies: qaqc_disclosed is true

Cut-off Undisclosednegative

High-grade interval reported without stating the cut-off grade used for compositing.

Why it applies: no cutoff_grade was stated

Infill Drillingneutral

Confirmatory drilling to raise resource confidence, not new discovery.

Why it applies: drill_program_type is "mixed"

LBX26-110Ishkōday · goldGrade: 0.063Grade Unit: g/tIntercept: 4.55 mView all details
Link to this fact

Identity

Hole ID
LBX26-110
Project
Ishkōday
Commodity
gold
Region
canada_on
Reported Region
canada_on
Ticker
LME

Geometry

Grade
0.063
Grade Unit
g/t
Intercept
4.55 m
From
80.45 m
To
85 m
Hole Depth
246 m
Intercept Depth
80.45 m

Classification

Program
mixed
Sample Type
drill
Group ID
LBX26-110:80.45-85
Mining Method
unknown

Location

Easting
446106
Northing
5513334
Elevation
322 m
Azimuth
328 °
Dip
-50 °
Loc. Confidence
high
Loc. Source
document

QA/QC

Laboratory
ALS
QA/QC Disclosed
Yes
QP Signed
Yes
QA/QC Methods
standards, blanks, duplicates

Compositing

Dilution Disclosed
Yes

Review

Needs Review
No
Interp. Status
scored
Historical
No

Dates

Event date
2026-09-22T00:00:00.000Z

Reasoning: A very low-grade gold intercept with limited materiality. The lack of true width is a minor negative.

Positive factors

  • QA/QC protocols are disclosed, enhancing confidence in the results.

Negative factors

  • Gold grade (0.063 g/t) is very low and not economically significant.
  • True width has not been determined, potentially overstating the intercept length.

Evidence · table

“0.063”

Context: 4.55

Tags used in scoring

QA/QC Disclosedpositive

Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).

Why it applies: qaqc_disclosed is true

Cut-off Undisclosednegative

High-grade interval reported without stating the cut-off grade used for compositing.

Why it applies: no cutoff_grade was stated

Infill Drillingneutral

Confirmatory drilling to raise resource confidence, not new discovery.

Why it applies: drill_program_type is "mixed"

LBX26-110Ishkōday · silverGrade: 12.29Grade Unit: g/tIntercept: 4.55 mView all details
Link to this fact

Identity

Hole ID
LBX26-110
Project
Ishkōday
Commodity
silver
Region
canada_on
Reported Region
canada_on
Ticker
LME

Geometry

Grade
12.29
Grade Unit
g/t
Intercept
4.55 m
From
80.45 m
To
85 m
Hole Depth
246 m
Intercept Depth
80.45 m

Classification

Program
mixed
Sample Type
drill
Group ID
LBX26-110:80.45-85
Mining Method
unknown

Location

Easting
446106
Northing
5513334
Elevation
322 m
Azimuth
328 °
Dip
-50 °
Loc. Confidence
high
Loc. Source
document

QA/QC

Laboratory
ALS
QA/QC Disclosed
Yes
QP Signed
Yes
QA/QC Methods
standards, blanks, duplicates

Compositing

Dilution Disclosed
Yes

Review

Needs Review
No
Interp. Status
scored
Historical
No

Dates

Event date
2026-09-22T00:00:00.000Z

Reasoning: A low-grade silver intercept, but above the project's historical average, contributing to the polymetallic understanding. The lack of true width is a minor negative.

Positive factors

  • Silver grade (12.29 g/t) is above the project's prior average (4.834 g/t).
  • QA/QC protocols are disclosed, enhancing confidence in the results.

Negative factors

  • Silver grade is below the weak threshold for silver (30 g/t).
  • True width has not been determined, potentially overstating the intercept length.

Evidence · table

“12.29”

Context: 4.55

Tags used in scoring

QA/QC Disclosedpositive

Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).

Why it applies: qaqc_disclosed is true

Cut-off Undisclosednegative

High-grade interval reported without stating the cut-off grade used for compositing.

Why it applies: no cutoff_grade was stated

Infill Drillingneutral

Confirmatory drilling to raise resource confidence, not new discovery.

Why it applies: drill_program_type is "mixed"

LBX26-110Ishkōday · copperGrade: 0.76Grade Unit: %Intercept: 4.55 mView all details
Link to this fact

Identity

Hole ID
LBX26-110
Project
Ishkōday
Commodity
copper
Region
canada_on
Reported Region
canada_on
Ticker
LME

Geometry

Grade
0.76
Grade Unit
%
Intercept
4.55 m
From
80.45 m
To
85 m
Hole Depth
246 m
Intercept Depth
80.45 m

Classification

Program
mixed
Sample Type
drill
Group ID
LBX26-110:80.45-85
Mining Method
unknown

Location

Easting
446106
Northing
5513334
Elevation
322 m
Azimuth
328 °
Dip
-50 °
Loc. Confidence
high
Loc. Source
document

QA/QC

Laboratory
ALS
QA/QC Disclosed
Yes
QP Signed
Yes
QA/QC Methods
standards, blanks, duplicates

Compositing

Dilution Disclosed
Yes

Review

Needs Review
No
Interp. Status
scored
Historical
No

Dates

Event date
2026-09-22T00:00:00.000Z

Reasoning: A moderate-grade copper intercept that contributes to the polymetallic understanding. The lack of true width is a minor negative.

Positive factors

  • Copper grade (0.76%) is above the weak threshold for copper (0.25%).
  • QA/QC protocols are disclosed, enhancing confidence in the results.

Negative factors

  • True width has not been determined, potentially overstating the intercept length.

Evidence · table

“0.76”

Context: 4.55

Tags used in scoring

QA/QC Disclosedpositive

Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).

Why it applies: qaqc_disclosed is true

Cut-off Undisclosednegative

High-grade interval reported without stating the cut-off grade used for compositing.

Why it applies: no cutoff_grade was stated

Infill Drillingneutral

Confirmatory drilling to raise resource confidence, not new discovery.

Why it applies: drill_program_type is "mixed"

LBX26-110Ishkōday · zincGrade: 0.16Grade Unit: %Intercept: 4.55 mView all details
Link to this fact

Identity

Hole ID
LBX26-110
Project
Ishkōday
Commodity
zinc
Region
canada_on
Reported Region
canada_on
Ticker
LME

Geometry

Grade
0.16
Grade Unit
%
Intercept
4.55 m
From
80.45 m
To
85 m
Hole Depth
246 m
Intercept Depth
80.45 m

Classification

Program
mixed
Sample Type
drill
Group ID
LBX26-110:80.45-85
Mining Method
unknown

Location

Easting
446106
Northing
5513334
Elevation
322 m
Azimuth
328 °
Dip
-50 °
Loc. Confidence
high
Loc. Source
document

QA/QC

Laboratory
ALS
QA/QC Disclosed
Yes
QP Signed
Yes
QA/QC Methods
standards, blanks, duplicates

Compositing

Dilution Disclosed
Yes

Review

Needs Review
No
Interp. Status
scored
Historical
No

Dates

Event date
2026-09-22T00:00:00.000Z

Reasoning: A very low-grade zinc intercept with limited materiality. The lack of true width is a minor negative.

Positive factors

  • QA/QC protocols are disclosed, enhancing confidence in the results.

Negative factors

  • Zinc grade (0.16%) is very low and not economically significant.
  • True width has not been determined, potentially overstating the intercept length.

Evidence · table

“0.16”

Context: 4.55

Tags used in scoring

QA/QC Disclosedpositive

Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).

Why it applies: qaqc_disclosed is true

Cut-off Undisclosednegative

High-grade interval reported without stating the cut-off grade used for compositing.

Why it applies: no cutoff_grade was stated

Infill Drillingneutral

Confirmatory drilling to raise resource confidence, not new discovery.

Why it applies: drill_program_type is "mixed"

LBX26-110Ishkōday · goldGrade: 0.138Grade Unit: g/tIntercept: 1.7 mView all details
Link to this fact

Identity

Hole ID
LBX26-110
Project
Ishkōday
Commodity
gold
Region
canada_on
Reported Region
canada_on
Ticker
LME

Geometry

Grade
0.138
Grade Unit
g/t
Intercept
1.7 m
From
80.45 m
To
82.15 m
Hole Depth
246 m
Intercept Depth
80.45 m

Classification

Program
mixed
Sample Type
drill
Group ID
LBX26-110:80.45-82.15
Mining Method
unknown

Location

Easting
446106
Northing
5513334
Elevation
322 m
Azimuth
328 °
Dip
-50 °
Loc. Confidence
high
Loc. Source
document

QA/QC

Laboratory
ALS
QA/QC Disclosed
Yes
QP Signed
Yes
QA/QC Methods
standards, blanks, duplicates

Compositing

Dilution Disclosed
Yes

Review

Needs Review
No
Interp. Status
scored
Historical
No

Dates

Event date
2026-09-22T00:00:00.000Z

Reasoning: A very low-grade gold sub-interval with limited materiality. The lack of true width is a minor negative.

Positive factors

  • QA/QC protocols are disclosed, enhancing confidence in the results.

Negative factors

  • Gold grade (0.138 g/t) is very low and not economically significant.
  • True width has not been determined, potentially overstating the intercept length.

Evidence · table

“0.138”

Context: 1.70

Tags used in scoring

QA/QC Disclosedpositive

Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).

Why it applies: qaqc_disclosed is true

Cut-off Undisclosednegative

High-grade interval reported without stating the cut-off grade used for compositing.

Why it applies: no cutoff_grade was stated

Infill Drillingneutral

Confirmatory drilling to raise resource confidence, not new discovery.

Why it applies: drill_program_type is "mixed"

LBX26-110Ishkōday · silverGrade: 24.45Grade Unit: g/tIntercept: 1.7 mView all details
Link to this fact

Identity

Hole ID
LBX26-110
Project
Ishkōday
Commodity
silver
Region
canada_on
Reported Region
canada_on
Ticker
LME

Geometry

Grade
24.45
Grade Unit
g/t
Intercept
1.7 m
From
80.45 m
To
82.15 m
Hole Depth
246 m
Intercept Depth
80.45 m

Classification

Program
mixed
Sample Type
drill
Group ID
LBX26-110:80.45-82.15
Mining Method
unknown

Location

Easting
446106
Northing
5513334
Elevation
322 m
Azimuth
328 °
Dip
-50 °
Loc. Confidence
high
Loc. Source
document

QA/QC

Laboratory
ALS
QA/QC Disclosed
Yes
QP Signed
Yes
QA/QC Methods
standards, blanks, duplicates

Compositing

Dilution Disclosed
Yes

Review

Needs Review
No
Interp. Status
scored
Historical
No

Dates

Event date
2026-09-22T00:00:00.000Z

Reasoning: A good silver sub-interval, well above the project's historical average, contributing positively to the polymetallic understanding. The lack of true width is a minor negative.

Positive factors

  • Silver grade (24.45 g/t) is approaching the weak threshold for silver (30 g/t) and is significantly above the project's prior average (4.834 g/t).
  • QA/QC protocols are disclosed, enhancing confidence in the results.

Negative factors

  • True width has not been determined, potentially overstating the intercept length.

Evidence · table

“24.45”

Context: 1.70

Tags used in scoring

QA/QC Disclosedpositive

Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).

Why it applies: qaqc_disclosed is true

Cut-off Undisclosednegative

High-grade interval reported without stating the cut-off grade used for compositing.

Why it applies: no cutoff_grade was stated

Infill Drillingneutral

Confirmatory drilling to raise resource confidence, not new discovery.

Why it applies: drill_program_type is "mixed"

LBX26-110Ishkōday · copperGrade: 1.56Grade Unit: %Intercept: 1.7 mView all details
Link to this fact

Identity

Hole ID
LBX26-110
Project
Ishkōday
Commodity
copper
Region
canada_on
Reported Region
canada_on
Ticker
LME

Geometry

Grade
1.56
Grade Unit
%
Intercept
1.7 m
From
80.45 m
To
82.15 m
Hole Depth
246 m
Intercept Depth
80.45 m

Classification

Program
mixed
Sample Type
drill
Group ID
LBX26-110:80.45-82.15
Mining Method
unknown

Location

Easting
446106
Northing
5513334
Elevation
322 m
Azimuth
328 °
Dip
-50 °
Loc. Confidence
high
Loc. Source
document

QA/QC

Laboratory
ALS
QA/QC Disclosed
Yes
QP Signed
Yes
QA/QC Methods
standards, blanks, duplicates

Compositing

Dilution Disclosed
Yes

Review

Needs Review
No
Interp. Status
scored
Historical
No

Dates

Event date
2026-09-22T00:00:00.000Z

Reasoning: A strong-grade copper sub-interval that is a positive indicator for polymetallic mineralization. The lack of true width is a minor negative.

Positive factors

  • Copper grade (1.56%) is strong for copper (threshold 1%).
  • QA/QC protocols are disclosed, enhancing confidence in the results.

Negative factors

  • True width has not been determined, potentially overstating the intercept length.

Evidence · table

“1.56”

Context: 1.70

Tags used in scoring

QA/QC Disclosedpositive

Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).

Why it applies: qaqc_disclosed is true

Cut-off Undisclosednegative

High-grade interval reported without stating the cut-off grade used for compositing.

Why it applies: no cutoff_grade was stated

Infill Drillingneutral

Confirmatory drilling to raise resource confidence, not new discovery.

Why it applies: drill_program_type is "mixed"

LBX26-110Ishkōday · zincGrade: 0.31Grade Unit: %Intercept: 1.7 mView all details
Link to this fact

Identity

Hole ID
LBX26-110
Project
Ishkōday
Commodity
zinc
Region
canada_on
Reported Region
canada_on
Ticker
LME

Geometry

Grade
0.31
Grade Unit
%
Intercept
1.7 m
From
80.45 m
To
82.15 m
Hole Depth
246 m
Intercept Depth
80.45 m

Classification

Program
mixed
Sample Type
drill
Group ID
LBX26-110:80.45-82.15
Mining Method
unknown

Location

Easting
446106
Northing
5513334
Elevation
322 m
Azimuth
328 °
Dip
-50 °
Loc. Confidence
high
Loc. Source
document

QA/QC

Laboratory
ALS
QA/QC Disclosed
Yes
QP Signed
Yes
QA/QC Methods
standards, blanks, duplicates

Compositing

Dilution Disclosed
Yes

Review

Needs Review
No
Interp. Status
scored
Historical
No

Dates

Event date
2026-09-22T00:00:00.000Z

Reasoning: A very low-grade zinc sub-interval with limited materiality. The lack of true width is a minor negative.

Positive factors

  • QA/QC protocols are disclosed, enhancing confidence in the results.

Negative factors

  • Zinc grade (0.31%) is very low and not economically significant.
  • True width has not been determined, potentially overstating the intercept length.

Evidence · table

“0.31”

Context: 1.70

Tags used in scoring

QA/QC Disclosedpositive

Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).

Why it applies: qaqc_disclosed is true

Cut-off Undisclosednegative

High-grade interval reported without stating the cut-off grade used for compositing.

Why it applies: no cutoff_grade was stated

Infill Drillingneutral

Confirmatory drilling to raise resource confidence, not new discovery.

Why it applies: drill_program_type is "mixed"

LBX26-110Ishkōday · goldGrade: 0.183Grade Unit: g/tIntercept: 1 mView all details
Link to this fact

Identity

Hole ID
LBX26-110
Project
Ishkōday
Commodity
gold
Region
canada_on
Reported Region
canada_on
Ticker
LME

Geometry

Grade
0.183
Grade Unit
g/t
Intercept
1 m
From
81.15 m
To
82.15 m
Hole Depth
246 m
Intercept Depth
81.15 m

Classification

Program
mixed
Sample Type
drill
Group ID
LBX26-110:81.15-82.15
Mining Method
unknown

Location

Easting
446106
Northing
5513334
Elevation
322 m
Azimuth
328 °
Dip
-50 °
Loc. Confidence
high
Loc. Source
document

QA/QC

Laboratory
ALS
QA/QC Disclosed
Yes
QP Signed
Yes
QA/QC Methods
standards, blanks, duplicates

Compositing

Dilution Disclosed
Yes

Review

Needs Review
No
Interp. Status
scored
Historical
No

Dates

Event date
2026-09-22T00:00:00.000Z

Reasoning: A very low-grade gold sub-interval with limited materiality. The lack of true width is a minor negative.

Positive factors

  • QA/QC protocols are disclosed, enhancing confidence in the results.

Negative factors

  • Gold grade (0.183 g/t) is very low and not economically significant.
  • True width has not been determined, potentially overstating the intercept length.

Evidence · table

“0.183”

Context: 1.00

Tags used in scoring

QA/QC Disclosedpositive

Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).

Why it applies: qaqc_disclosed is true

Cut-off Undisclosednegative

High-grade interval reported without stating the cut-off grade used for compositing.

Why it applies: no cutoff_grade was stated

Infill Drillingneutral

Confirmatory drilling to raise resource confidence, not new discovery.

Why it applies: drill_program_type is "mixed"

LBX26-110Ishkōday · silverGrade: 32.05Grade Unit: g/tIntercept: 1 mView all details
Link to this fact

Identity

Hole ID
LBX26-110
Project
Ishkōday
Commodity
silver
Region
canada_on
Reported Region
canada_on
Ticker
LME

Geometry

Grade
32.05
Grade Unit
g/t
Intercept
1 m
From
81.15 m
To
82.15 m
Hole Depth
246 m
Intercept Depth
81.15 m

Classification

Program
mixed
Sample Type
drill
Group ID
LBX26-110:81.15-82.15
Mining Method
unknown

Location

Easting
446106
Northing
5513334
Elevation
322 m
Azimuth
328 °
Dip
-50 °
Loc. Confidence
high
Loc. Source
document

QA/QC

Laboratory
ALS
QA/QC Disclosed
Yes
QP Signed
Yes
QA/QC Methods
standards, blanks, duplicates

Compositing

Dilution Disclosed
Yes

Review

Needs Review
No
Interp. Status
scored
Historical
No

Dates

Event date
2026-09-22T00:00:00.000Z

Reasoning: A strong-grade silver sub-interval, well above the project's historical average, contributing positively to the polymetallic understanding. The lack of true width is a minor negative.

Positive factors

  • Silver grade (32.05 g/t) is above the weak threshold for silver (30 g/t) and significantly above the project's prior average (4.834 g/t).
  • QA/QC protocols are disclosed, enhancing confidence in the results.

Negative factors

  • True width has not been determined, potentially overstating the intercept length.

Evidence · table

“32.05”

Context: 1.00

Tags used in scoring

QA/QC Disclosedpositive

Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).

Why it applies: qaqc_disclosed is true

Cut-off Undisclosednegative

High-grade interval reported without stating the cut-off grade used for compositing.

Why it applies: no cutoff_grade was stated

Infill Drillingneutral

Confirmatory drilling to raise resource confidence, not new discovery.

Why it applies: drill_program_type is "mixed"

LBX26-110Ishkōday · copperGrade: 2.16Grade Unit: %Intercept: 1 mView all details
Link to this fact

Identity

Hole ID
LBX26-110
Project
Ishkōday
Commodity
copper
Region
canada_on
Reported Region
canada_on
Ticker
LME

Geometry

Grade
2.16
Grade Unit
%
Intercept
1 m
From
81.15 m
To
82.15 m
Hole Depth
246 m
Intercept Depth
81.15 m

Classification

Program
mixed
Sample Type
drill
Group ID
LBX26-110:81.15-82.15
Mining Method
unknown

Location

Easting
446106
Northing
5513334
Elevation
322 m
Azimuth
328 °
Dip
-50 °
Loc. Confidence
high
Loc. Source
document

QA/QC

Laboratory
ALS
QA/QC Disclosed
Yes
QP Signed
Yes
QA/QC Methods
standards, blanks, duplicates

Compositing

Dilution Disclosed
Yes

Review

Needs Review
No
Interp. Status
scored
Historical
No

Dates

Event date
2026-09-22T00:00:00.000Z

Reasoning: An exceptional-grade copper sub-interval that is a very positive indicator for polymetallic mineralization. The lack of true width is a minor negative.

Positive factors

  • Copper grade (2.16%) is exceptional for copper (threshold 2.5%) and strong (threshold 1%).
  • QA/QC protocols are disclosed, enhancing confidence in the results.

Negative factors

  • True width has not been determined, potentially overstating the intercept length.

Evidence · table

“2.16”

Context: 1.00

Tags used in scoring

QA/QC Disclosedpositive

Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).

Why it applies: qaqc_disclosed is true

Cut-off Undisclosednegative

High-grade interval reported without stating the cut-off grade used for compositing.

Why it applies: no cutoff_grade was stated

Infill Drillingneutral

Confirmatory drilling to raise resource confidence, not new discovery.

Why it applies: drill_program_type is "mixed"

LBX26-110Ishkōday · zincGrade: 0.45Grade Unit: %Intercept: 1 mView all details
Link to this fact

Identity

Hole ID
LBX26-110
Project
Ishkōday
Commodity
zinc
Region
canada_on
Reported Region
canada_on
Ticker
LME

Geometry

Grade
0.45
Grade Unit
%
Intercept
1 m
From
81.15 m
To
82.15 m
Hole Depth
246 m
Intercept Depth
81.15 m

Classification

Program
mixed
Sample Type
drill
Group ID
LBX26-110:81.15-82.15
Mining Method
unknown

Location

Easting
446106
Northing
5513334
Elevation
322 m
Azimuth
328 °
Dip
-50 °
Loc. Confidence
high
Loc. Source
document

QA/QC

Laboratory
ALS
QA/QC Disclosed
Yes
QP Signed
Yes
QA/QC Methods
standards, blanks, duplicates

Compositing

Dilution Disclosed
Yes

Review

Needs Review
No
Interp. Status
scored
Historical
No

Dates

Event date
2026-09-22T00:00:00.000Z

Reasoning: A very low-grade zinc sub-interval with limited materiality. The lack of true width is a minor negative.

Positive factors

  • QA/QC protocols are disclosed, enhancing confidence in the results.

Negative factors

  • Zinc grade (0.45%) is very low and not economically significant.
  • True width has not been determined, potentially overstating the intercept length.

Evidence · table

“0.45”

Context: 1.00

Tags used in scoring

QA/QC Disclosedpositive

Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).

Why it applies: qaqc_disclosed is true

Cut-off Undisclosednegative

High-grade interval reported without stating the cut-off grade used for compositing.

Why it applies: no cutoff_grade was stated

Infill Drillingneutral

Confirmatory drilling to raise resource confidence, not new discovery.

Why it applies: drill_program_type is "mixed"

LBX26-110Ishkōday · goldGrade: 0.018Grade Unit: g/tIntercept: 1.45 mView all details
Link to this fact

Identity

Hole ID
LBX26-110
Project
Ishkōday
Commodity
gold
Region
canada_on
Reported Region
canada_on
Ticker
LME

Geometry

Grade
0.018
Grade Unit
g/t
Intercept
1.45 m
From
165.5 m
To
166.95 m
Hole Depth
246 m
Intercept Depth
165.5 m

Classification

Program
mixed
Sample Type
drill
Group ID
LBX26-110:165.5-166.95
Mining Method
unknown

Location

Easting
446106
Northing
5513334
Elevation
322 m
Azimuth
328 °
Dip
-50 °
Loc. Confidence
high
Loc. Source
document

QA/QC

Laboratory
ALS
QA/QC Disclosed
Yes
QP Signed
Yes
QA/QC Methods
standards, blanks, duplicates

Compositing

Dilution Disclosed
Yes

Review

Needs Review
No
Interp. Status
scored
Historical
No

Dates

Event date
2026-09-22T00:00:00.000Z

Reasoning: A very low-grade gold intercept with limited materiality. The lack of true width is a minor negative.

Positive factors

  • QA/QC protocols are disclosed, enhancing confidence in the results.

Negative factors

  • Gold grade (0.018 g/t) is very low and not economically significant.
  • True width has not been determined, potentially overstating the intercept length.

Evidence · table

“0.018”

Context: 1.45

Tags used in scoring

QA/QC Disclosedpositive

Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).

Why it applies: qaqc_disclosed is true

Cut-off Undisclosednegative

High-grade interval reported without stating the cut-off grade used for compositing.

Why it applies: no cutoff_grade was stated

Infill Drillingneutral

Confirmatory drilling to raise resource confidence, not new discovery.

Why it applies: drill_program_type is "mixed"

LBX26-110Ishkōday · silverGrade: 1.15Grade Unit: g/tIntercept: 1.45 mView all details
Link to this fact

Identity

Hole ID
LBX26-110
Project
Ishkōday
Commodity
silver
Region
canada_on
Reported Region
canada_on
Ticker
LME

Geometry

Grade
1.15
Grade Unit
g/t
Intercept
1.45 m
From
165.5 m
To
166.95 m
Hole Depth
246 m
Intercept Depth
165.5 m

Classification

Program
mixed
Sample Type
drill
Group ID
LBX26-110:165.5-166.95
Mining Method
unknown

Location

Easting
446106
Northing
5513334
Elevation
322 m
Azimuth
328 °
Dip
-50 °
Loc. Confidence
high
Loc. Source
document

QA/QC

Laboratory
ALS
QA/QC Disclosed
Yes
QP Signed
Yes
QA/QC Methods
standards, blanks, duplicates

Compositing

Dilution Disclosed
Yes

Review

Needs Review
No
Interp. Status
scored
Historical
No

Dates

Event date
2026-09-22T00:00:00.000Z

Reasoning: A very low-grade silver intercept with limited materiality. The lack of true width is a minor negative.

Positive factors

  • QA/QC protocols are disclosed, enhancing confidence in the results.

Negative factors

  • Silver grade (1.15 g/t) is very low and not economically significant.
  • True width has not been determined, potentially overstating the intercept length.

Evidence · table

“1.15”

Context: 1.45

Tags used in scoring

QA/QC Disclosedpositive

Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).

Why it applies: qaqc_disclosed is true

Cut-off Undisclosednegative

High-grade interval reported without stating the cut-off grade used for compositing.

Why it applies: no cutoff_grade was stated

Infill Drillingneutral

Confirmatory drilling to raise resource confidence, not new discovery.

Why it applies: drill_program_type is "mixed"

LBX26-110Ishkōday · copperGrade: 0.12Grade Unit: %Intercept: 1.45 mView all details
Link to this fact

Identity

Hole ID
LBX26-110
Project
Ishkōday
Commodity
copper
Region
canada_on
Reported Region
canada_on
Ticker
LME

Geometry

Grade
0.12
Grade Unit
%
Intercept
1.45 m
From
165.5 m
To
166.95 m
Hole Depth
246 m
Intercept Depth
165.5 m

Classification

Program
mixed
Sample Type
drill
Group ID
LBX26-110:165.5-166.95
Mining Method
unknown

Location

Easting
446106
Northing
5513334
Elevation
322 m
Azimuth
328 °
Dip
-50 °
Loc. Confidence
high
Loc. Source
document

QA/QC

Laboratory
ALS
QA/QC Disclosed
Yes
QP Signed
Yes
QA/QC Methods
standards, blanks, duplicates

Compositing

Dilution Disclosed
Yes

Review

Needs Review
No
Interp. Status
scored
Historical
No

Dates

Event date
2026-09-22T00:00:00.000Z

Reasoning: A very low-grade copper intercept with limited materiality. The lack of true width is a minor negative.

Positive factors

  • QA/QC protocols are disclosed, enhancing confidence in the results.

Negative factors

  • Copper grade (0.12%) is very low and not economically significant.
  • True width has not been determined, potentially overstating the intercept length.

Evidence · table

“0.12”

Context: 1.45

Tags used in scoring

QA/QC Disclosedpositive

Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).

Why it applies: qaqc_disclosed is true

Cut-off Undisclosednegative

High-grade interval reported without stating the cut-off grade used for compositing.

Why it applies: no cutoff_grade was stated

Infill Drillingneutral

Confirmatory drilling to raise resource confidence, not new discovery.

Why it applies: drill_program_type is "mixed"

LBX26-110Ishkōday · zincGrade: 1.72Grade Unit: %Intercept: 1.45 mView all details
Link to this fact

Identity

Hole ID
LBX26-110
Project
Ishkōday
Commodity
zinc
Region
canada_on
Reported Region
canada_on
Ticker
LME

Geometry

Grade
1.72
Grade Unit
%
Intercept
1.45 m
From
165.5 m
To
166.95 m
Hole Depth
246 m
Intercept Depth
165.5 m

Classification

Program
mixed
Sample Type
drill
Group ID
LBX26-110:165.5-166.95
Mining Method
unknown

Location

Easting
446106
Northing
5513334
Elevation
322 m
Azimuth
328 °
Dip
-50 °
Loc. Confidence
high
Loc. Source
document

QA/QC

Laboratory
ALS
QA/QC Disclosed
Yes
QP Signed
Yes
QA/QC Methods
standards, blanks, duplicates

Compositing

Dilution Disclosed
Yes

Review

Needs Review
No
Interp. Status
scored
Historical
No

Dates

Event date
2026-09-22T00:00:00.000Z

Reasoning: A weak-grade zinc intercept that contributes to the polymetallic understanding. The lack of true width is a minor negative.

Positive factors

  • Zinc grade (1.72%) is approaching the weak threshold for zinc (2%).
  • QA/QC protocols are disclosed, enhancing confidence in the results.

Negative factors

  • True width has not been determined, potentially overstating the intercept length.

Evidence · table

“1.72”

Context: 1.45

Tags used in scoring

QA/QC Disclosedpositive

Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).

Why it applies: qaqc_disclosed is true

Cut-off Undisclosednegative

High-grade interval reported without stating the cut-off grade used for compositing.

Why it applies: no cutoff_grade was stated

Infill Drillingneutral

Confirmatory drilling to raise resource confidence, not new discovery.

Why it applies: drill_program_type is "mixed"

LBX26-110Ishkōday · goldGrade: 0.246Grade Unit: g/tIntercept: 3.7 mView all details
Link to this fact

Identity

Hole ID
LBX26-110
Project
Ishkōday
Commodity
gold
Region
canada_on
Reported Region
canada_on
Ticker
LME

Geometry

Grade
0.246
Grade Unit
g/t
Intercept
3.7 m
From
184.2 m
To
187.9 m
Hole Depth
246 m
Intercept Depth
184.2 m

Classification

Program
mixed
Sample Type
drill
Group ID
LBX26-110:184.2-187.9
Mining Method
unknown

Location

Easting
446106
Northing
5513334
Elevation
322 m
Azimuth
328 °
Dip
-50 °
Loc. Confidence
high
Loc. Source
document

QA/QC

Laboratory
ALS
QA/QC Disclosed
Yes
QP Signed
Yes
QA/QC Methods
standards, blanks, duplicates

Compositing

Dilution Disclosed
Yes

Review

Needs Review
No
Interp. Status
scored
Historical
No

Dates

Event date
2026-09-22T00:00:00.000Z

Reasoning: A low-grade gold intercept with limited materiality. The lack of true width is a minor negative.

Positive factors

  • QA/QC protocols are disclosed, enhancing confidence in the results.

Negative factors

  • Gold grade (0.246 g/t) is below the weak threshold for orogenic gold (0.3 g/t).
  • True width has not been determined, potentially overstating the intercept length.

Evidence · table

“0.246”

Context: 3.70

Tags used in scoring

QA/QC Disclosedpositive

Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).

Why it applies: qaqc_disclosed is true

Cut-off Undisclosednegative

High-grade interval reported without stating the cut-off grade used for compositing.

Why it applies: no cutoff_grade was stated

Infill Drillingneutral

Confirmatory drilling to raise resource confidence, not new discovery.

Why it applies: drill_program_type is "mixed"

LBX26-110Ishkōday · silverGrade: 8.04Grade Unit: g/tIntercept: 3.7 mView all details
Link to this fact

Identity

Hole ID
LBX26-110
Project
Ishkōday
Commodity
silver
Region
canada_on
Reported Region
canada_on
Ticker
LME

Geometry

Grade
8.04
Grade Unit
g/t
Intercept
3.7 m
From
184.2 m
To
187.9 m
Hole Depth
246 m
Intercept Depth
184.2 m

Classification

Program
mixed
Sample Type
drill
Group ID
LBX26-110:184.2-187.9
Mining Method
unknown

Location

Easting
446106
Northing
5513334
Elevation
322 m
Azimuth
328 °
Dip
-50 °
Loc. Confidence
high
Loc. Source
document

QA/QC

Laboratory
ALS
QA/QC Disclosed
Yes
QP Signed
Yes
QA/QC Methods
standards, blanks, duplicates

Compositing

Dilution Disclosed
Yes

Review

Needs Review
No
Interp. Status
scored
Historical
No

Dates

Event date
2026-09-22T00:00:00.000Z

Reasoning: A low-grade silver intercept, but above the project's historical average, contributing to the polymetallic understanding. The lack of true width is a minor negative.

Positive factors

  • Silver grade (8.04 g/t) is above the project's prior average (4.834 g/t).
  • QA/QC protocols are disclosed, enhancing confidence in the results.

Negative factors

  • Silver grade is below the weak threshold for silver (30 g/t).
  • True width has not been determined, potentially overstating the intercept length.

Evidence · table

“8.04”

Context: 3.70

Tags used in scoring

QA/QC Disclosedpositive

Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).

Why it applies: qaqc_disclosed is true

Cut-off Undisclosednegative

High-grade interval reported without stating the cut-off grade used for compositing.

Why it applies: no cutoff_grade was stated

Infill Drillingneutral

Confirmatory drilling to raise resource confidence, not new discovery.

Why it applies: drill_program_type is "mixed"

LBX26-110Ishkōday · copperGrade: 0.6Grade Unit: %Intercept: 3.7 mView all details
Link to this fact

Identity

Hole ID
LBX26-110
Project
Ishkōday
Commodity
copper
Region
canada_on
Reported Region
canada_on
Ticker
LME

Geometry

Grade
0.6
Grade Unit
%
Intercept
3.7 m
From
184.2 m
To
187.9 m
Hole Depth
246 m
Intercept Depth
184.2 m

Classification

Program
mixed
Sample Type
drill
Group ID
LBX26-110:184.2-187.9
Mining Method
unknown

Location

Easting
446106
Northing
5513334
Elevation
322 m
Azimuth
328 °
Dip
-50 °
Loc. Confidence
high
Loc. Source
document

QA/QC

Laboratory
ALS
QA/QC Disclosed
Yes
QP Signed
Yes
QA/QC Methods
standards, blanks, duplicates

Compositing

Dilution Disclosed
Yes

Review

Needs Review
No
Interp. Status
scored
Historical
No

Dates

Event date
2026-09-22T00:00:00.000Z

Reasoning: A moderate-grade copper intercept that contributes to the polymetallic understanding. The lack of true width is a minor negative.

Positive factors

  • Copper grade (0.60%) is above the weak threshold for copper (0.25%).
  • QA/QC protocols are disclosed, enhancing confidence in the results.

Negative factors

  • True width has not been determined, potentially overstating the intercept length.

Evidence · table

“0.60”

Context: 3.70

Tags used in scoring

QA/QC Disclosedpositive

Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).

Why it applies: qaqc_disclosed is true

Cut-off Undisclosednegative

High-grade interval reported without stating the cut-off grade used for compositing.

Why it applies: no cutoff_grade was stated

Infill Drillingneutral

Confirmatory drilling to raise resource confidence, not new discovery.

Why it applies: drill_program_type is "mixed"

LBX26-110Ishkōday · zincGrade: 1.08Grade Unit: %Intercept: 3.7 mView all details
Link to this fact

Identity

Hole ID
LBX26-110
Project
Ishkōday
Commodity
zinc
Region
canada_on
Reported Region
canada_on
Ticker
LME

Geometry

Grade
1.08
Grade Unit
%
Intercept
3.7 m
From
184.2 m
To
187.9 m
Hole Depth
246 m
Intercept Depth
184.2 m

Classification

Program
mixed
Sample Type
drill
Group ID
LBX26-110:184.2-187.9
Mining Method
unknown

Location

Easting
446106
Northing
5513334
Elevation
322 m
Azimuth
328 °
Dip
-50 °
Loc. Confidence
high
Loc. Source
document

QA/QC

Laboratory
ALS
QA/QC Disclosed
Yes
QP Signed
Yes
QA/QC Methods
standards, blanks, duplicates

Compositing

Dilution Disclosed
Yes

Review

Needs Review
No
Interp. Status
scored
Historical
No

Dates

Event date
2026-09-22T00:00:00.000Z

Reasoning: A low-grade zinc intercept, below the project's historical average, contributing to the polymetallic understanding. The lack of true width is a minor negative.

Positive factors

  • Zinc grade (1.08%) is above the project's prior average (1.674%) but below the weak threshold for zinc (2%).
  • QA/QC protocols are disclosed, enhancing confidence in the results.

Negative factors

  • True width has not been determined, potentially overstating the intercept length.

Evidence · table

“1.08”

Context: 3.70

Tags used in scoring

QA/QC Disclosedpositive

Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).

Why it applies: qaqc_disclosed is true

Cut-off Undisclosednegative

High-grade interval reported without stating the cut-off grade used for compositing.

Why it applies: no cutoff_grade was stated

Infill Drillingneutral

Confirmatory drilling to raise resource confidence, not new discovery.

Why it applies: drill_program_type is "mixed"

LBX26-110Ishkōday · goldGrade: 0.427Grade Unit: g/tIntercept: 1 mView all details
Link to this fact

Identity

Hole ID
LBX26-110
Project
Ishkōday
Commodity
gold
Region
canada_on
Reported Region
canada_on
Ticker
LME

Geometry

Grade
0.427
Grade Unit
g/t
Intercept
1 m
From
186.9 m
To
187.9 m
Hole Depth
246 m
Intercept Depth
186.9 m

Classification

Program
mixed
Sample Type
drill
Group ID
LBX26-110:186.9-187.9
Mining Method
unknown

Location

Easting
446106
Northing
5513334
Elevation
322 m
Azimuth
328 °
Dip
-50 °
Loc. Confidence
high
Loc. Source
document

QA/QC

Laboratory
ALS
QA/QC Disclosed
Yes
QP Signed
Yes
QA/QC Methods
standards, blanks, duplicates

Compositing

Dilution Disclosed
Yes

Review

Needs Review
No
Interp. Status
scored
Historical
No

Dates

Event date
2026-09-22T00:00:00.000Z

Reasoning: A narrow, weak-grade gold sub-interval that contributes to the overall geological understanding. The lack of true width is a minor negative.

Positive factors

  • Gold grade (0.427 g/t) is above the weak threshold for orogenic gold (0.3 g/t).
  • QA/QC protocols are disclosed, enhancing confidence in the results.

Negative factors

  • Intercept length (1.0 m) is narrow.
  • True width has not been determined, potentially overstating the intercept length.

Evidence · table

“0.427”

Context: 1.00

Tags used in scoring

QA/QC Disclosedpositive

Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).

Why it applies: qaqc_disclosed is true

Cut-off Undisclosednegative

High-grade interval reported without stating the cut-off grade used for compositing.

Why it applies: no cutoff_grade was stated

Infill Drillingneutral

Confirmatory drilling to raise resource confidence, not new discovery.

Why it applies: drill_program_type is "mixed"

LBX26-110Ishkōday · silverGrade: 17.15Grade Unit: g/tIntercept: 1 mView all details
Link to this fact

Identity

Hole ID
LBX26-110
Project
Ishkōday
Commodity
silver
Region
canada_on
Reported Region
canada_on
Ticker
LME

Geometry

Grade
17.15
Grade Unit
g/t
Intercept
1 m
From
186.9 m
To
187.9 m
Hole Depth
246 m
Intercept Depth
186.9 m

Classification

Program
mixed
Sample Type
drill
Group ID
LBX26-110:186.9-187.9
Mining Method
unknown

Location

Easting
446106
Northing
5513334
Elevation
322 m
Azimuth
328 °
Dip
-50 °
Loc. Confidence
high
Loc. Source
document

QA/QC

Laboratory
ALS
QA/QC Disclosed
Yes
QP Signed
Yes
QA/QC Methods
standards, blanks, duplicates

Compositing

Dilution Disclosed
Yes

Review

Needs Review
No
Interp. Status
scored
Historical
No

Dates

Event date
2026-09-22T00:00:00.000Z

Reasoning: A good silver sub-interval, well above the project's historical average, contributing positively to the polymetallic understanding. The lack of true width is a minor negative.

Positive factors

  • Silver grade (17.15 g/t) is above the project's prior average (4.834 g/t).
  • QA/QC protocols are disclosed, enhancing confidence in the results.

Negative factors

  • Silver grade is below the weak threshold for silver (30 g/t).
  • True width has not been determined, potentially overstating the intercept length.

Evidence · table

“17.15”

Context: 1.00

Tags used in scoring

QA/QC Disclosedpositive

Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).

Why it applies: qaqc_disclosed is true

Cut-off Undisclosednegative

High-grade interval reported without stating the cut-off grade used for compositing.

Why it applies: no cutoff_grade was stated

Infill Drillingneutral

Confirmatory drilling to raise resource confidence, not new discovery.

Why it applies: drill_program_type is "mixed"

LBX26-110Ishkōday · copperGrade: 1.18Grade Unit: %Intercept: 1 mView all details
Link to this fact

Identity

Hole ID
LBX26-110
Project
Ishkōday
Commodity
copper
Region
canada_on
Reported Region
canada_on
Ticker
LME

Geometry

Grade
1.18
Grade Unit
%
Intercept
1 m
From
186.9 m
To
187.9 m
Hole Depth
246 m
Intercept Depth
186.9 m

Classification

Program
mixed
Sample Type
drill
Group ID
LBX26-110:186.9-187.9
Mining Method
unknown

Location

Easting
446106
Northing
5513334
Elevation
322 m
Azimuth
328 °
Dip
-50 °
Loc. Confidence
high
Loc. Source
document

QA/QC

Laboratory
ALS
QA/QC Disclosed
Yes
QP Signed
Yes
QA/QC Methods
standards, blanks, duplicates

Compositing

Dilution Disclosed
Yes

Review

Needs Review
No
Interp. Status
scored
Historical
No

Dates

Event date
2026-09-22T00:00:00.000Z

Reasoning: A strong-grade copper sub-interval that is a positive indicator for polymetallic mineralization. The lack of true width is a minor negative.

Positive factors

  • Copper grade (1.18%) is strong for copper (threshold 1%).
  • QA/QC protocols are disclosed, enhancing confidence in the results.

Negative factors

  • True width has not been determined, potentially overstating the intercept length.

Evidence · table

“1.18”

Context: 1.00

Tags used in scoring

QA/QC Disclosedpositive

Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).

Why it applies: qaqc_disclosed is true

Cut-off Undisclosednegative

High-grade interval reported without stating the cut-off grade used for compositing.

Why it applies: no cutoff_grade was stated

Infill Drillingneutral

Confirmatory drilling to raise resource confidence, not new discovery.

Why it applies: drill_program_type is "mixed"

LBX26-110Ishkōday · zincGrade: 3.63Grade Unit: %Intercept: 1 mView all details
Link to this fact

Identity

Hole ID
LBX26-110
Project
Ishkōday
Commodity
zinc
Region
canada_on
Reported Region
canada_on
Ticker
LME

Geometry

Grade
3.63
Grade Unit
%
Intercept
1 m
From
186.9 m
To
187.9 m
Hole Depth
246 m
Intercept Depth
186.9 m

Classification

Program
mixed
Sample Type
drill
Group ID
LBX26-110:186.9-187.9
Mining Method
unknown

Location

Easting
446106
Northing
5513334
Elevation
322 m
Azimuth
328 °
Dip
-50 °
Loc. Confidence
high
Loc. Source
document

QA/QC

Laboratory
ALS
QA/QC Disclosed
Yes
QP Signed
Yes
QA/QC Methods
standards, blanks, duplicates

Compositing

Dilution Disclosed
Yes

Review

Needs Review
No
Interp. Status
scored
Historical
No

Dates

Event date
2026-09-22T00:00:00.000Z

Reasoning: A moderate-grade zinc sub-interval, above the project's historical average, contributing positively to the polymetallic understanding. The lack of true width is a minor negative.

Positive factors

  • Zinc grade (3.63%) is above the weak threshold for zinc (2%) and above the project's prior average (1.674%).
  • QA/QC protocols are disclosed, enhancing confidence in the results.

Negative factors

  • True width has not been determined, potentially overstating the intercept length.

Evidence · table

“3.63”

Context: 1.00

Tags used in scoring

QA/QC Disclosedpositive

Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).

Why it applies: qaqc_disclosed is true

Cut-off Undisclosednegative

High-grade interval reported without stating the cut-off grade used for compositing.

Why it applies: no cutoff_grade was stated

Infill Drillingneutral

Confirmatory drilling to raise resource confidence, not new discovery.

Why it applies: drill_program_type is "mixed"

LBX26-110Ishkōday · goldGrade: 0.141Grade Unit: g/tIntercept: 0.7 mView all details
Link to this fact

Identity

Hole ID
LBX26-110
Project
Ishkōday
Commodity
gold
Region
canada_on
Reported Region
canada_on
Ticker
LME

Geometry

Grade
0.141
Grade Unit
g/t
Intercept
0.7 m
From
197.65 m
To
198.35 m
Hole Depth
246 m
Intercept Depth
197.65 m

Classification

Program
mixed
Sample Type
drill
Group ID
LBX26-110:197.65-198.35
Mining Method
unknown

Location

Easting
446106
Northing
5513334
Elevation
322 m
Azimuth
328 °
Dip
-50 °
Loc. Confidence
high
Loc. Source
document

QA/QC

Laboratory
ALS
QA/QC Disclosed
Yes
QP Signed
Yes
QA/QC Methods
standards, blanks, duplicates

Compositing

Dilution Disclosed
Yes

Review

Needs Review
No
Interp. Status
scored
Historical
No

Dates

Event date
2026-09-22T00:00:00.000Z

Reasoning: A very low-grade gold intercept with limited materiality. The lack of true width is a minor negative.

Positive factors

  • QA/QC protocols are disclosed, enhancing confidence in the results.

Negative factors

  • Gold grade (0.141 g/t) is very low and not economically significant.
  • True width has not been determined, potentially overstating the intercept length.

Evidence · table

“0.141”

Context: 0.70

Tags used in scoring

QA/QC Disclosedpositive

Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).

Why it applies: qaqc_disclosed is true

Cut-off Undisclosednegative

High-grade interval reported without stating the cut-off grade used for compositing.

Why it applies: no cutoff_grade was stated

Infill Drillingneutral

Confirmatory drilling to raise resource confidence, not new discovery.

Why it applies: drill_program_type is "mixed"

LBX26-110Ishkōday · silverGrade: 0.25Grade Unit: g/tIntercept: 0.7 mView all details
Link to this fact

Identity

Hole ID
LBX26-110
Project
Ishkōday
Commodity
silver
Region
canada_on
Reported Region
canada_on
Ticker
LME

Geometry

Grade
0.25
Grade Unit
g/t
Intercept
0.7 m
From
197.65 m
To
198.35 m
Hole Depth
246 m
Intercept Depth
197.65 m

Classification

Program
mixed
Sample Type
drill
Group ID
LBX26-110:197.65-198.35
Mining Method
unknown

Location

Easting
446106
Northing
5513334
Elevation
322 m
Azimuth
328 °
Dip
-50 °
Loc. Confidence
high
Loc. Source
document

QA/QC

Laboratory
ALS
QA/QC Disclosed
Yes
QP Signed
Yes
QA/QC Methods
standards, blanks, duplicates

Compositing

Dilution Disclosed
Yes

Review

Needs Review
No
Interp. Status
scored
Historical
No

Dates

Event date
2026-09-22T00:00:00.000Z

Reasoning: A very low-grade silver intercept with limited materiality. The lack of true width is a minor negative.

Positive factors

  • QA/QC protocols are disclosed, enhancing confidence in the results.

Negative factors

  • Silver grade (0.25 g/t) is very low and not economically significant.
  • True width has not been determined, potentially overstating the intercept length.

Evidence · table

“0.25”

Context: 0.70

Tags used in scoring

QA/QC Disclosedpositive

Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).

Why it applies: qaqc_disclosed is true

Cut-off Undisclosednegative

High-grade interval reported without stating the cut-off grade used for compositing.

Why it applies: no cutoff_grade was stated

Infill Drillingneutral

Confirmatory drilling to raise resource confidence, not new discovery.

Why it applies: drill_program_type is "mixed"

LBX26-110Ishkōday · copperGrade: 0.01Grade Unit: %Intercept: 0.7 mView all details
Link to this fact

Identity

Hole ID
LBX26-110
Project
Ishkōday
Commodity
copper
Region
canada_on
Reported Region
canada_on
Ticker
LME

Geometry

Grade
0.01
Grade Unit
%
Intercept
0.7 m
From
197.65 m
To
198.35 m
Hole Depth
246 m
Intercept Depth
197.65 m

Classification

Program
mixed
Sample Type
drill
Group ID
LBX26-110:197.65-198.35
Mining Method
unknown

Location

Easting
446106
Northing
5513334
Elevation
322 m
Azimuth
328 °
Dip
-50 °
Loc. Confidence
high
Loc. Source
document

QA/QC

Laboratory
ALS
QA/QC Disclosed
Yes
QP Signed
Yes
QA/QC Methods
standards, blanks, duplicates

Compositing

Dilution Disclosed
Yes

Review

Needs Review
No
Interp. Status
scored
Historical
No

Dates

Event date
2026-09-22T00:00:00.000Z

Reasoning: A very low-grade copper intercept with limited materiality. The lack of true width is a minor negative.

Positive factors

  • QA/QC protocols are disclosed, enhancing confidence in the results.

Negative factors

  • Copper grade (0.01%) is very low and not economically significant.
  • True width has not been determined, potentially overstating the intercept length.

Evidence · table

“0.01”

Context: 0.70

Tags used in scoring

QA/QC Disclosedpositive

Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).

Why it applies: qaqc_disclosed is true

Cut-off Undisclosednegative

High-grade interval reported without stating the cut-off grade used for compositing.

Why it applies: no cutoff_grade was stated

Infill Drillingneutral

Confirmatory drilling to raise resource confidence, not new discovery.

Why it applies: drill_program_type is "mixed"

LBX26-110Ishkōday · zincGrade: 0.01Grade Unit: %Intercept: 0.7 mView all details
Link to this fact

Identity

Hole ID
LBX26-110
Project
Ishkōday
Commodity
zinc
Region
canada_on
Reported Region
canada_on
Ticker
LME

Geometry

Grade
0.01
Grade Unit
%
Intercept
0.7 m
From
197.65 m
To
198.35 m
Hole Depth
246 m
Intercept Depth
197.65 m

Classification

Program
mixed
Sample Type
drill
Group ID
LBX26-110:197.65-198.35
Mining Method
unknown

Location

Easting
446106
Northing
5513334
Elevation
322 m
Azimuth
328 °
Dip
-50 °
Loc. Confidence
high
Loc. Source
document

QA/QC

Laboratory
ALS
QA/QC Disclosed
Yes
QP Signed
Yes
QA/QC Methods
standards, blanks, duplicates

Compositing

Dilution Disclosed
Yes

Review

Needs Review
No
Interp. Status
scored
Historical
No

Dates

Event date
2026-09-22T00:00:00.000Z

Reasoning: A very low-grade zinc intercept with limited materiality. The lack of true width is a minor negative.

Positive factors

  • QA/QC protocols are disclosed, enhancing confidence in the results.

Negative factors

  • Zinc grade (0.01%) is very low and not economically significant.
  • True width has not been determined, potentially overstating the intercept length.

Evidence · table

“0.01”

Context: 0.70

Tags used in scoring

QA/QC Disclosedpositive

Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).

Why it applies: qaqc_disclosed is true

Cut-off Undisclosednegative

High-grade interval reported without stating the cut-off grade used for compositing.

Why it applies: no cutoff_grade was stated

Infill Drillingneutral

Confirmatory drilling to raise resource confidence, not new discovery.

Why it applies: drill_program_type is "mixed"

LBX26-110Ishkōday · goldGrade: 0.152Grade Unit: g/tIntercept: 0.5 mView all details
Link to this fact

Identity

Hole ID
LBX26-110
Project
Ishkōday
Commodity
gold
Region
canada_on
Reported Region
canada_on
Ticker
LME

Geometry

Grade
0.152
Grade Unit
g/t
Intercept
0.5 m
From
200.5 m
To
201 m
Hole Depth
246 m
Intercept Depth
200.5 m

Classification

Program
mixed
Sample Type
drill
Group ID
LBX26-110:200.5-201
Mining Method
unknown

Location

Easting
446106
Northing
5513334
Elevation
322 m
Azimuth
328 °
Dip
-50 °
Loc. Confidence
high
Loc. Source
document

QA/QC

Laboratory
ALS
QA/QC Disclosed
Yes
QP Signed
Yes
QA/QC Methods
standards, blanks, duplicates

Compositing

Dilution Disclosed
Yes

Review

Needs Review
No
Interp. Status
scored
Historical
No

Dates

Event date
2026-09-22T00:00:00.000Z

Reasoning: A very low-grade gold intercept with limited materiality. The lack of true width is a minor negative.

Positive factors

  • QA/QC protocols are disclosed, enhancing confidence in the results.

Negative factors

  • Gold grade (0.152 g/t) is very low and not economically significant.
  • True width has not been determined, potentially overstating the intercept length.

Evidence · table

“0.152”

Context: 0.50

Tags used in scoring

QA/QC Disclosedpositive

Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).

Why it applies: qaqc_disclosed is true

Cut-off Undisclosednegative

High-grade interval reported without stating the cut-off grade used for compositing.

Why it applies: no cutoff_grade was stated

Infill Drillingneutral

Confirmatory drilling to raise resource confidence, not new discovery.

Why it applies: drill_program_type is "mixed"

LBX26-110Ishkōday · silverGrade: 1.2Grade Unit: g/tIntercept: 0.5 mView all details
Link to this fact

Identity

Hole ID
LBX26-110
Project
Ishkōday
Commodity
silver
Region
canada_on
Reported Region
canada_on
Ticker
LME

Geometry

Grade
1.2
Grade Unit
g/t
Intercept
0.5 m
From
200.5 m
To
201 m
Hole Depth
246 m
Intercept Depth
200.5 m

Classification

Program
mixed
Sample Type
drill
Group ID
LBX26-110:200.5-201
Mining Method
unknown

Location

Easting
446106
Northing
5513334
Elevation
322 m
Azimuth
328 °
Dip
-50 °
Loc. Confidence
high
Loc. Source
document

QA/QC

Laboratory
ALS
QA/QC Disclosed
Yes
QP Signed
Yes
QA/QC Methods
standards, blanks, duplicates

Compositing

Dilution Disclosed
Yes

Review

Needs Review
No
Interp. Status
scored
Historical
No

Dates

Event date
2026-09-22T00:00:00.000Z

Reasoning: A very low-grade silver intercept with limited materiality. The lack of true width is a minor negative.

Positive factors

  • QA/QC protocols are disclosed, enhancing confidence in the results.

Negative factors

  • Silver grade (1.20 g/t) is very low and not economically significant.
  • True width has not been determined, potentially overstating the intercept length.

Evidence · table

“1.20”

Context: 0.50

Tags used in scoring

QA/QC Disclosedpositive

Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).

Why it applies: qaqc_disclosed is true

Cut-off Undisclosednegative

High-grade interval reported without stating the cut-off grade used for compositing.

Why it applies: no cutoff_grade was stated

Infill Drillingneutral

Confirmatory drilling to raise resource confidence, not new discovery.

Why it applies: drill_program_type is "mixed"

LBX26-110Ishkōday · copperGrade: 0.11Grade Unit: %Intercept: 0.5 mView all details
Link to this fact

Identity

Hole ID
LBX26-110
Project
Ishkōday
Commodity
copper
Region
canada_on
Reported Region
canada_on
Ticker
LME

Geometry

Grade
0.11
Grade Unit
%
Intercept
0.5 m
From
200.5 m
To
201 m
Hole Depth
246 m
Intercept Depth
200.5 m

Classification

Program
mixed
Sample Type
drill
Group ID
LBX26-110:200.5-201
Mining Method
unknown

Location

Easting
446106
Northing
5513334
Elevation
322 m
Azimuth
328 °
Dip
-50 °
Loc. Confidence
high
Loc. Source
document

QA/QC

Laboratory
ALS
QA/QC Disclosed
Yes
QP Signed
Yes
QA/QC Methods
standards, blanks, duplicates

Compositing

Dilution Disclosed
Yes

Review

Needs Review
No
Interp. Status
scored
Historical
No

Dates

Event date
2026-09-22T00:00:00.000Z

Reasoning: A very low-grade copper intercept with limited materiality. The lack of true width is a minor negative.

Positive factors

  • QA/QC protocols are disclosed, enhancing confidence in the results.

Negative factors

  • Copper grade (0.11%) is very low and not economically significant.
  • True width has not been determined, potentially overstating the intercept length.

Evidence · table

“0.11”

Context: 0.50

Tags used in scoring

QA/QC Disclosedpositive

Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).

Why it applies: qaqc_disclosed is true

Cut-off Undisclosednegative

High-grade interval reported without stating the cut-off grade used for compositing.

Why it applies: no cutoff_grade was stated

Infill Drillingneutral

Confirmatory drilling to raise resource confidence, not new discovery.

Why it applies: drill_program_type is "mixed"

LBX26-110Ishkōday · zincGrade: 0.02Grade Unit: %Intercept: 0.5 mView all details
Link to this fact

Identity

Hole ID
LBX26-110
Project
Ishkōday
Commodity
zinc
Region
canada_on
Reported Region
canada_on
Ticker
LME

Geometry

Grade
0.02
Grade Unit
%
Intercept
0.5 m
From
200.5 m
To
201 m
Hole Depth
246 m
Intercept Depth
200.5 m

Classification

Program
mixed
Sample Type
drill
Group ID
LBX26-110:200.5-201
Mining Method
unknown

Location

Easting
446106
Northing
5513334
Elevation
322 m
Azimuth
328 °
Dip
-50 °
Loc. Confidence
high
Loc. Source
document

QA/QC

Laboratory
ALS
QA/QC Disclosed
Yes
QP Signed
Yes
QA/QC Methods
standards, blanks, duplicates

Compositing

Dilution Disclosed
Yes

Review

Needs Review
No
Interp. Status
scored
Historical
No

Dates

Event date
2026-09-22T00:00:00.000Z

Reasoning: A very low-grade zinc intercept with limited materiality. The lack of true width is a minor negative.

Positive factors

  • QA/QC protocols are disclosed, enhancing confidence in the results.

Negative factors

  • Zinc grade (0.02%) is very low and not economically significant.
  • True width has not been determined, potentially overstating the intercept length.

Evidence · table

“0.02”

Context: 0.50

Tags used in scoring

QA/QC Disclosedpositive

Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).

Why it applies: qaqc_disclosed is true

Cut-off Undisclosednegative

High-grade interval reported without stating the cut-off grade used for compositing.

Why it applies: no cutoff_grade was stated

Infill Drillingneutral

Confirmatory drilling to raise resource confidence, not new discovery.

Why it applies: drill_program_type is "mixed"

LBX26-110Ishkōday · goldGrade: 0.563Grade Unit: g/tIntercept: 9.9 mView all details
Link to this fact

Identity

Hole ID
LBX26-110
Project
Ishkōday
Commodity
gold
Region
canada_on
Reported Region
canada_on
Ticker
LME

Geometry

Grade
0.563
Grade Unit
g/t
Intercept
9.9 m
From
205.7 m
To
215.6 m
Hole Depth
246 m
Intercept Depth
205.7 m

Classification

Program
mixed
Sample Type
drill
Group ID
LBX26-110:205.7-215.6
Mining Method
unknown

Location

Easting
446106
Northing
5513334
Elevation
322 m
Azimuth
328 °
Dip
-50 °
Loc. Confidence
high
Loc. Source
document

QA/QC

Laboratory
ALS
QA/QC Disclosed
Yes
QP Signed
Yes
QA/QC Methods
standards, blanks, duplicates

Compositing

Dilution Disclosed
Yes

Review

Needs Review
No
Interp. Status
scored
Historical
No

Dates

Event date
2026-09-22T00:00:00.000Z

Reasoning: A moderate-width, weak-grade gold intercept that is notable for being an unexpected discovery at depth, adding to the project's exploration potential. However, the grade is lower than historical project averages.

Positive factors

  • Intercept length (9.90 m) is moderate, indicating good continuity.
  • Gold grade (0.563 g/t) is above the weak threshold for orogenic gold (0.3 g/t).
  • This interval was unexpected and provides new geological information for potential follow-up evaluation.
  • QA/QC protocols are disclosed, enhancing confidence in the results.

Negative factors

  • Gold grade is below the moderate threshold for orogenic gold (1 g/t) and significantly below the project's prior average (6.908 g/t).
  • True width has not been determined, potentially overstating the intercept length.

Evidence · table

“0.563”

Context: 9.90

Tags used in scoring

QA/QC Disclosedpositive

Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).

Why it applies: qaqc_disclosed is true

Cut-off Undisclosednegative

High-grade interval reported without stating the cut-off grade used for compositing.

Why it applies: no cutoff_grade was stated

Infill Drillingneutral

Confirmatory drilling to raise resource confidence, not new discovery.

Why it applies: drill_program_type is "mixed"

LBX26-110Ishkōday · silverGrade: 0.31Grade Unit: g/tIntercept: 9.9 mView all details
Link to this fact

Identity

Hole ID
LBX26-110
Project
Ishkōday
Commodity
silver
Region
canada_on
Reported Region
canada_on
Ticker
LME

Geometry

Grade
0.31
Grade Unit
g/t
Intercept
9.9 m
From
205.7 m
To
215.6 m
Hole Depth
246 m
Intercept Depth
205.7 m

Classification

Program
mixed
Sample Type
drill
Group ID
LBX26-110:205.7-215.6
Mining Method
unknown

Location

Easting
446106
Northing
5513334
Elevation
322 m
Azimuth
328 °
Dip
-50 °
Loc. Confidence
high
Loc. Source
document

QA/QC

Laboratory
ALS
QA/QC Disclosed
Yes
QP Signed
Yes
QA/QC Methods
standards, blanks, duplicates

Compositing

Dilution Disclosed
Yes

Review

Needs Review
No
Interp. Status
scored
Historical
No

Dates

Event date
2026-09-22T00:00:00.000Z

Reasoning: A very low-grade silver intercept with limited materiality. The lack of true width is a minor negative.

Positive factors

  • QA/QC protocols are disclosed, enhancing confidence in the results.

Negative factors

  • Silver grade (0.31 g/t) is very low and not economically significant.
  • True width has not been determined, potentially overstating the intercept length.

Evidence · table

“0.31”

Context: 9.90

Tags used in scoring

QA/QC Disclosedpositive

Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).

Why it applies: qaqc_disclosed is true

Cut-off Undisclosednegative

High-grade interval reported without stating the cut-off grade used for compositing.

Why it applies: no cutoff_grade was stated

Infill Drillingneutral

Confirmatory drilling to raise resource confidence, not new discovery.

Why it applies: drill_program_type is "mixed"

LBX26-110Ishkōday · zincGrade: 0.01Grade Unit: %Intercept: 9.9 mView all details
Link to this fact

Identity

Hole ID
LBX26-110
Project
Ishkōday
Commodity
zinc
Region
canada_on
Reported Region
canada_on
Ticker
LME

Geometry

Grade
0.01
Grade Unit
%
Intercept
9.9 m
From
205.7 m
To
215.6 m
Hole Depth
246 m
Intercept Depth
205.7 m

Classification

Program
mixed
Sample Type
drill
Group ID
LBX26-110:205.7-215.6
Mining Method
unknown

Location

Easting
446106
Northing
5513334
Elevation
322 m
Azimuth
328 °
Dip
-50 °
Loc. Confidence
high
Loc. Source
document

QA/QC

Laboratory
ALS
QA/QC Disclosed
Yes
QP Signed
Yes
QA/QC Methods
standards, blanks, duplicates

Compositing

Dilution Disclosed
Yes

Review

Needs Review
No
Interp. Status
scored
Historical
No

Dates

Event date
2026-09-22T00:00:00.000Z

Reasoning: A very low-grade zinc intercept with limited materiality. The lack of true width is a minor negative.

Positive factors

  • QA/QC protocols are disclosed, enhancing confidence in the results.

Negative factors

  • Zinc grade (0.01%) is very low and not economically significant.
  • True width has not been determined, potentially overstating the intercept length.

Evidence · table

“0.01”

Context: 9.90

Tags used in scoring

QA/QC Disclosedpositive

Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).

Why it applies: qaqc_disclosed is true

Cut-off Undisclosednegative

High-grade interval reported without stating the cut-off grade used for compositing.

Why it applies: no cutoff_grade was stated

Infill Drillingneutral

Confirmatory drilling to raise resource confidence, not new discovery.

Why it applies: drill_program_type is "mixed"

LBX26-110Ishkōday · goldGrade: 1.693Grade Unit: g/tIntercept: 2.3 mView all details
Link to this fact

Identity

Hole ID
LBX26-110
Project
Ishkōday
Commodity
gold
Region
canada_on
Reported Region
canada_on
Ticker
LME

Geometry

Grade
1.693
Grade Unit
g/t
Intercept
2.3 m
From
211.7 m
To
214 m
Hole Depth
246 m
Intercept Depth
211.7 m

Classification

Program
mixed
Sample Type
drill
Group ID
LBX26-110:211.7-214
Mining Method
unknown

Location

Easting
446106
Northing
5513334
Elevation
322 m
Azimuth
328 °
Dip
-50 °
Loc. Confidence
high
Loc. Source
document

QA/QC

Laboratory
ALS
QA/QC Disclosed
Yes
QP Signed
Yes
QA/QC Methods
standards, blanks, duplicates

Compositing

Dilution Disclosed
Yes

Review

Needs Review
No
Interp. Status
scored
Historical
No

Dates

Event date
2026-09-22T00:00:00.000Z

Reasoning: A moderate-grade gold sub-interval that contributes to the overall geological understanding, but is below the project's historical average. The lack of true width is a minor negative.

Positive factors

  • Gold grade (1.693 g/t) is above the moderate threshold for orogenic gold (1 g/t).
  • QA/QC protocols are disclosed, enhancing confidence in the results.

Negative factors

  • Gold grade is below the project's prior average (6.908 g/t).
  • True width has not been determined, potentially overstating the intercept length.

Evidence · table

“1.693”

Context: 2.30

Tags used in scoring

QA/QC Disclosedpositive

Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).

Why it applies: qaqc_disclosed is true

Cut-off Undisclosednegative

High-grade interval reported without stating the cut-off grade used for compositing.

Why it applies: no cutoff_grade was stated

Infill Drillingneutral

Confirmatory drilling to raise resource confidence, not new discovery.

Why it applies: drill_program_type is "mixed"

LBX26-110Ishkōday · silverGrade: 0.43Grade Unit: g/tIntercept: 2.3 mView all details
Link to this fact

Identity

Hole ID
LBX26-110
Project
Ishkōday
Commodity
silver
Region
canada_on
Reported Region
canada_on
Ticker
LME

Geometry

Grade
0.43
Grade Unit
g/t
Intercept
2.3 m
From
211.7 m
To
214 m
Hole Depth
246 m
Intercept Depth
211.7 m

Classification

Program
mixed
Sample Type
drill
Group ID
LBX26-110:211.7-214
Mining Method
unknown

Location

Easting
446106
Northing
5513334
Elevation
322 m
Azimuth
328 °
Dip
-50 °
Loc. Confidence
high
Loc. Source
document

QA/QC

Laboratory
ALS
QA/QC Disclosed
Yes
QP Signed
Yes
QA/QC Methods
standards, blanks, duplicates

Compositing

Dilution Disclosed
Yes

Review

Needs Review
No
Interp. Status
scored
Historical
No

Dates

Event date
2026-09-22T00:00:00.000Z

Reasoning: A very low-grade silver sub-interval with limited materiality. The lack of true width is a minor negative.

Positive factors

  • QA/QC protocols are disclosed, enhancing confidence in the results.

Negative factors

  • Silver grade (0.43 g/t) is very low and not economically significant.
  • True width has not been determined, potentially overstating the intercept length.

Evidence · table

“0.43”

Context: 2.30

Tags used in scoring

QA/QC Disclosedpositive

Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).

Why it applies: qaqc_disclosed is true

Cut-off Undisclosednegative

High-grade interval reported without stating the cut-off grade used for compositing.

Why it applies: no cutoff_grade was stated

Infill Drillingneutral

Confirmatory drilling to raise resource confidence, not new discovery.

Why it applies: drill_program_type is "mixed"

LBX26-110Ishkōday · zincGrade: 0.01Grade Unit: %Intercept: 2.3 mView all details
Link to this fact

Identity

Hole ID
LBX26-110
Project
Ishkōday
Commodity
zinc
Region
canada_on
Reported Region
canada_on
Ticker
LME

Geometry

Grade
0.01
Grade Unit
%
Intercept
2.3 m
From
211.7 m
To
214 m
Hole Depth
246 m
Intercept Depth
211.7 m

Classification

Program
mixed
Sample Type
drill
Group ID
LBX26-110:211.7-214
Mining Method
unknown

Location

Easting
446106
Northing
5513334
Elevation
322 m
Azimuth
328 °
Dip
-50 °
Loc. Confidence
high
Loc. Source
document

QA/QC

Laboratory
ALS
QA/QC Disclosed
Yes
QP Signed
Yes
QA/QC Methods
standards, blanks, duplicates

Compositing

Dilution Disclosed
Yes

Review

Needs Review
No
Interp. Status
scored
Historical
No

Dates

Event date
2026-09-22T00:00:00.000Z

Reasoning: A very low-grade zinc sub-interval with limited materiality. The lack of true width is a minor negative.

Positive factors

  • QA/QC protocols are disclosed, enhancing confidence in the results.

Negative factors

  • Zinc grade (0.01%) is very low and not economically significant.
  • True width has not been determined, potentially overstating the intercept length.

Evidence · table

“0.01”

Context: 2.30

Tags used in scoring

QA/QC Disclosedpositive

Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).

Why it applies: qaqc_disclosed is true

Cut-off Undisclosednegative

High-grade interval reported without stating the cut-off grade used for compositing.

Why it applies: no cutoff_grade was stated

Infill Drillingneutral

Confirmatory drilling to raise resource confidence, not new discovery.

Why it applies: drill_program_type is "mixed"

LBX26-110Ishkōday · goldGrade: 0.37Grade Unit: g/tIntercept: 0.6 mView all details
Link to this fact

Identity

Hole ID
LBX26-110
Project
Ishkōday
Commodity
gold
Region
canada_on
Reported Region
canada_on
Ticker
LME

Geometry

Grade
0.37
Grade Unit
g/t
Intercept
0.6 m
From
230.4 m
To
231 m
Hole Depth
246 m
Intercept Depth
230.4 m

Classification

Program
mixed
Sample Type
drill
Group ID
LBX26-110:230.4-231
Mining Method
unknown

Location

Easting
446106
Northing
5513334
Elevation
322 m
Azimuth
328 °
Dip
-50 °
Loc. Confidence
high
Loc. Source
document

QA/QC

Laboratory
ALS
QA/QC Disclosed
Yes
QP Signed
Yes
QA/QC Methods
standards, blanks, duplicates

Compositing

Dilution Disclosed
Yes

Review

Needs Review
No
Interp. Status
scored
Historical
No

Dates

Event date
2026-09-22T00:00:00.000Z

Reasoning: A narrow, weak-grade gold intercept that contributes to the overall geological understanding. The lack of true width is a minor negative.

Positive factors

  • Gold grade (0.37 g/t) is above the weak threshold for orogenic gold (0.3 g/t).
  • QA/QC protocols are disclosed, enhancing confidence in the results.

Negative factors

  • Intercept length (0.6 m) is narrow.
  • True width has not been determined, potentially overstating the intercept length.

Evidence · table

“0.370”

Context: 0.60

Tags used in scoring

QA/QC Disclosedpositive

Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).

Why it applies: qaqc_disclosed is true

Cut-off Undisclosednegative

High-grade interval reported without stating the cut-off grade used for compositing.

Why it applies: no cutoff_grade was stated

Infill Drillingneutral

Confirmatory drilling to raise resource confidence, not new discovery.

Why it applies: drill_program_type is "mixed"

LBX26-110Ishkōday · silverGrade: 0.25Grade Unit: g/tIntercept: 0.6 mView all details
Link to this fact

Identity

Hole ID
LBX26-110
Project
Ishkōday
Commodity
silver
Region
canada_on
Reported Region
canada_on
Ticker
LME

Geometry

Grade
0.25
Grade Unit
g/t
Intercept
0.6 m
From
230.4 m
To
231 m
Hole Depth
246 m
Intercept Depth
230.4 m

Classification

Program
mixed
Sample Type
drill
Group ID
LBX26-110:230.4-231
Mining Method
unknown

Location

Easting
446106
Northing
5513334
Elevation
322 m
Azimuth
328 °
Dip
-50 °
Loc. Confidence
high
Loc. Source
document

QA/QC

Laboratory
ALS
QA/QC Disclosed
Yes
QP Signed
Yes
QA/QC Methods
standards, blanks, duplicates

Compositing

Dilution Disclosed
Yes

Review

Needs Review
No
Interp. Status
scored
Historical
No

Dates

Event date
2026-09-22T00:00:00.000Z

Reasoning: A very low-grade silver intercept with limited materiality. The lack of true width is a minor negative.

Positive factors

  • QA/QC protocols are disclosed, enhancing confidence in the results.

Negative factors

  • Silver grade (0.25 g/t) is very low and not economically significant.
  • True width has not been determined, potentially overstating the intercept length.

Evidence · table

“0.25”

Context: 0.60

Tags used in scoring

QA/QC Disclosedpositive

Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).

Why it applies: qaqc_disclosed is true

Cut-off Undisclosednegative

High-grade interval reported without stating the cut-off grade used for compositing.

Why it applies: no cutoff_grade was stated

Infill Drillingneutral

Confirmatory drilling to raise resource confidence, not new discovery.

Why it applies: drill_program_type is "mixed"

LBX26-110Ishkōday · zincGrade: 0.01Grade Unit: %Intercept: 0.6 mView all details
Link to this fact

Identity

Hole ID
LBX26-110
Project
Ishkōday
Commodity
zinc
Region
canada_on
Reported Region
canada_on
Ticker
LME

Geometry

Grade
0.01
Grade Unit
%
Intercept
0.6 m
From
230.4 m
To
231 m
Hole Depth
246 m
Intercept Depth
230.4 m

Classification

Program
mixed
Sample Type
drill
Group ID
LBX26-110:230.4-231
Mining Method
unknown

Location

Easting
446106
Northing
5513334
Elevation
322 m
Azimuth
328 °
Dip
-50 °
Loc. Confidence
high
Loc. Source
document

QA/QC

Laboratory
ALS
QA/QC Disclosed
Yes
QP Signed
Yes
QA/QC Methods
standards, blanks, duplicates

Compositing

Dilution Disclosed
Yes

Review

Needs Review
No
Interp. Status
scored
Historical
No

Dates

Event date
2026-09-22T00:00:00.000Z

Reasoning: A very low-grade zinc intercept with limited materiality. The lack of true width is a minor negative.

Positive factors

  • QA/QC protocols are disclosed, enhancing confidence in the results.

Negative factors

  • Zinc grade (0.01%) is very low and not economically significant.
  • True width has not been determined, potentially overstating the intercept length.

Evidence · table

“0.01”

Context: 0.60

Tags used in scoring

QA/QC Disclosedpositive

Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).

Why it applies: qaqc_disclosed is true

Cut-off Undisclosednegative

High-grade interval reported without stating the cut-off grade used for compositing.

Why it applies: no cutoff_grade was stated

Infill Drillingneutral

Confirmatory drilling to raise resource confidence, not new discovery.

Why it applies: drill_program_type is "mixed"

LBX26-110Ishkōday · goldGrade: 0.21Grade Unit: g/tIntercept: 6 mView all details
Link to this fact

Identity

Hole ID
LBX26-110
Project
Ishkōday
Commodity
gold
Region
canada_on
Reported Region
canada_on
Ticker
LME

Geometry

Grade
0.21
Grade Unit
g/t
Intercept
6 m
From
238 m
To
244 m
Hole Depth
246 m
Intercept Depth
238 m

Classification

Program
mixed
Sample Type
drill
Group ID
LBX26-110:238-244
Mining Method
unknown

Location

Easting
446106
Northing
5513334
Elevation
322 m
Azimuth
328 °
Dip
-50 °
Loc. Confidence
high
Loc. Source
document

QA/QC

Laboratory
ALS
QA/QC Disclosed
Yes
QP Signed
Yes
QA/QC Methods
standards, blanks, duplicates

Compositing

Dilution Disclosed
Yes

Review

Needs Review
No
Interp. Status
scored
Historical
No

Dates

Event date
2026-09-22T00:00:00.000Z

Reasoning: A moderate-width, very low-grade gold intercept that is notable for being an unexpected discovery at depth, adding to the project's exploration potential. However, the grade is very low.

Positive factors

  • Intercept length (6.00 m) is moderate, indicating good continuity.
  • This interval was unexpected and provides new geological information for potential follow-up evaluation.
  • QA/QC protocols are disclosed, enhancing confidence in the results.

Negative factors

  • Gold grade (0.21 g/t) is below the weak threshold for orogenic gold (0.3 g/t) and significantly below the project's prior average (6.908 g/t).
  • True width has not been determined, potentially overstating the intercept length.

Evidence · table

“0.210”

Context: 6.00

Tags used in scoring

QA/QC Disclosedpositive

Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).

Why it applies: qaqc_disclosed is true

Cut-off Undisclosednegative

High-grade interval reported without stating the cut-off grade used for compositing.

Why it applies: no cutoff_grade was stated

Infill Drillingneutral

Confirmatory drilling to raise resource confidence, not new discovery.

Why it applies: drill_program_type is "mixed"

LBX26-110Ishkōday · silverGrade: 0.25Grade Unit: g/tIntercept: 6 mView all details
Link to this fact

Identity

Hole ID
LBX26-110
Project
Ishkōday
Commodity
silver
Region
canada_on
Reported Region
canada_on
Ticker
LME

Geometry

Grade
0.25
Grade Unit
g/t
Intercept
6 m
From
238 m
To
244 m
Hole Depth
246 m
Intercept Depth
238 m

Classification

Program
mixed
Sample Type
drill
Group ID
LBX26-110:238-244
Mining Method
unknown

Location

Easting
446106
Northing
5513334
Elevation
322 m
Azimuth
328 °
Dip
-50 °
Loc. Confidence
high
Loc. Source
document

QA/QC

Laboratory
ALS
QA/QC Disclosed
Yes
QP Signed
Yes
QA/QC Methods
standards, blanks, duplicates

Compositing

Dilution Disclosed
Yes

Review

Needs Review
No
Interp. Status
scored
Historical
No

Dates

Event date
2026-09-22T00:00:00.000Z

Reasoning: A very low-grade silver intercept with limited materiality. The lack of true width is a minor negative.

Positive factors

  • QA/QC protocols are disclosed, enhancing confidence in the results.

Negative factors

  • Silver grade (0.25 g/t) is very low and not economically significant.
  • True width has not been determined, potentially overstating the intercept length.

Evidence · table

“0.25”

Context: 6.00

Tags used in scoring

QA/QC Disclosedpositive

Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).

Why it applies: qaqc_disclosed is true

Cut-off Undisclosednegative

High-grade interval reported without stating the cut-off grade used for compositing.

Why it applies: no cutoff_grade was stated

Infill Drillingneutral

Confirmatory drilling to raise resource confidence, not new discovery.

Why it applies: drill_program_type is "mixed"

LBX26-110Ishkōday · copperGrade: 0.01Grade Unit: %Intercept: 6 mView all details
Link to this fact

Identity

Hole ID
LBX26-110
Project
Ishkōday
Commodity
copper
Region
canada_on
Reported Region
canada_on
Ticker
LME

Geometry

Grade
0.01
Grade Unit
%
Intercept
6 m
From
238 m
To
244 m
Hole Depth
246 m
Intercept Depth
238 m

Classification

Program
mixed
Sample Type
drill
Group ID
LBX26-110:238-244
Mining Method
unknown

Location

Easting
446106
Northing
5513334
Elevation
322 m
Azimuth
328 °
Dip
-50 °
Loc. Confidence
high
Loc. Source
document

QA/QC

Laboratory
ALS
QA/QC Disclosed
Yes
QP Signed
Yes
QA/QC Methods
standards, blanks, duplicates

Compositing

Dilution Disclosed
Yes

Review

Needs Review
No
Interp. Status
scored
Historical
No

Dates

Event date
2026-09-22T00:00:00.000Z

Reasoning: A very low-grade copper intercept with limited materiality. The lack of true width is a minor negative.

Positive factors

  • QA/QC protocols are disclosed, enhancing confidence in the results.

Negative factors

  • Copper grade (0.01%) is very low and not economically significant.
  • True width has not been determined, potentially overstating the intercept length.

Evidence · table

“0.01”

Context: 6.00

Tags used in scoring

QA/QC Disclosedpositive

Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).

Why it applies: qaqc_disclosed is true

Cut-off Undisclosednegative

High-grade interval reported without stating the cut-off grade used for compositing.

Why it applies: no cutoff_grade was stated

Infill Drillingneutral

Confirmatory drilling to raise resource confidence, not new discovery.

Why it applies: drill_program_type is "mixed"

LBX26-110Ishkōday · zincGrade: 0.01Grade Unit: %Intercept: 6 mView all details
Link to this fact

Identity

Hole ID
LBX26-110
Project
Ishkōday
Commodity
zinc
Region
canada_on
Reported Region
canada_on
Ticker
LME

Geometry

Grade
0.01
Grade Unit
%
Intercept
6 m
From
238 m
To
244 m
Hole Depth
246 m
Intercept Depth
238 m

Classification

Program
mixed
Sample Type
drill
Group ID
LBX26-110:238-244
Mining Method
unknown

Location

Easting
446106
Northing
5513334
Elevation
322 m
Azimuth
328 °
Dip
-50 °
Loc. Confidence
high
Loc. Source
document

QA/QC

Laboratory
ALS
QA/QC Disclosed
Yes
QP Signed
Yes
QA/QC Methods
standards, blanks, duplicates

Compositing

Dilution Disclosed
Yes

Review

Needs Review
No
Interp. Status
scored
Historical
No

Dates

Event date
2026-09-22T00:00:00.000Z

Reasoning: A very low-grade zinc intercept with limited materiality. The lack of true width is a minor negative.

Positive factors

  • QA/QC protocols are disclosed, enhancing confidence in the results.

Negative factors

  • Zinc grade (0.01%) is very low and not economically significant.
  • True width has not been determined, potentially overstating the intercept length.

Evidence · table

“0.01”

Context: 6.00

Tags used in scoring

QA/QC Disclosedpositive

Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).

Why it applies: qaqc_disclosed is true

Cut-off Undisclosednegative

High-grade interval reported without stating the cut-off grade used for compositing.

Why it applies: no cutoff_grade was stated

Infill Drillingneutral

Confirmatory drilling to raise resource confidence, not new discovery.

Why it applies: drill_program_type is "mixed"

How Atlas produces this analysis

Minestarters Atlas uses automated extraction to summarize mining announcements, identify reported measurements, and classify supporting evidence. Sentiment reflects the extracted narrative and classification rules; it is an interpretation, not a reported measurement. Evidence quotes and context are provided where available. Missing data, low-confidence results, and review flags indicate limitations. Check the original publisher announcement before relying on an interpretation.