LAURION Intersects High-Grade Gold and Polymetallic Mineralization in Drill Holes LBX25-101 and LBX25-102 at Ishkoday A-Zone Corridor
Original announcement by tmx on
- Company
- LAURION Mineral Exploration Inc.
- Ticker
- LME
- Exchange
- TSX
- Region
- Ontario, Canada
- Primary commodity
- Gold
- Secondary commodities
- Silver, Copper, Zinc
- Document categories
- Drill results
- Extracted
- 2026-08-21 02:37:55 UTC
Analysis by Minestarters Atlas
Minestarters Atlas analysis
Summary
LAURION Mineral Exploration Inc. reported drill results from the Ishkōday Project, intersecting high-grade gold and polymetallic mineralization in holes LBX25-101 and LBX25-102. The program aimed to extend coverage into a sparsely drilled area and strengthen continuity, with results showing promising grades for gold, silver, copper, and zinc. However, the reported intercepts are over narrow widths, and true widths are not yet known.
Reasoning: While the drill holes intersected polymetallic mineralization and extended coverage into a new area with robust QA/QC, the reported high grades are over very narrow widths, resulting in low grade-thickness products, and true widths remain unknown.
Positive factors
- Polymetallic mineralization
- Extension drilling into sparsely tested area
- Robust QA/QC disclosure
Negative factors
- Narrow intercept widths
- Low grade-thickness (GT) products
- True width not disclosed
- Cut-off grade for compositing not disclosed
Low confidence — this extraction should be reviewed alongside the original source.
Facts used in scoring: 120
Classification and evidence
Apparent Width Onlynegative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Why it applies: The document explicitly states that 'The true widths of the mineralized zones are not known at this time'.
Evidence · text
“The true widths of the mineralized zones are not known at this time as there is insufficient information to determine the orientation of the mineralization.”
Step-Out Extensionpositive
Mineralization extended beyond the previously known limit.
Why it applies: Drill hole LBX25-102 was positioned to extend drill coverage along the interpreted A-Zone mineralized corridor into a sparsely drilled area.
Evidence · text
“LBX25-102 positioned an additional 335 m southwest, extending drill coverage along the interpreted A-Zone mineralized corridor into a sparsely drilled area.”
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: The release includes a detailed section on Sampling and QA/QC Protocols, mentioning external standards, blanks, duplicates, ALS laboratory, and QP sign-off.
Evidence · text
“Sampling and QA/QC Protocols All drill core is transported and stored inside the core facility located at the Ishkōday Project in Greenstone, Ontario. LAURION employs an industry standard system of external standards, blanks and duplicates for all of its sampling, in addition to the QA/QC protocol employed by the laboratory.”
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: The document does not state the cut-off grade used for compositing the reported intervals.
Evidence · text
“NOTE: Intervals represent core length. The interval widths reported are down-hole widths.”
Extracted facts
Stored fact records: 120. Some facts used in scoring do not have a stored record.
Drill Results (120)
LBX25-101Ishkōday Project · goldGrade: 0.2Grade Unit: g/tIntercept: 3.9 mView all detailsHide details
Identity
- Hole ID
- LBX25-101
- Project
- Ishkōday Project
- Commodity
- gold
- Region
- canada_on
- Reported Region
- Ontario, Canada
- Ticker
- LME
Geometry
- Grade
- 0.2
- Grade Unit
- g/t
- Intercept
- 3.9 m
- From
- 7.9 m
- To
- 11.8 m
- Hole Depth
- 276 m
Classification
- Deposit Type
- orogenic
- Program
- mixed
- Sample Type
- drill
- Group ID
- LBX25-101:7.90-11.80
Location
- Easting
- 446328
- Northing
- 5513024
- Elevation
- 321 m
- Azimuth
- 127 °
- Dip
- -50 °
- Loc. Confidence
- high
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- blanks, standards, duplicates, check_assays
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-11T00:00:00.000Z
Reasoning: Low-grade gold intercept over a moderate width, contributing to polymetallic mineralization but with a very low GT product.
Negative factors
- Low grade-thickness (GT) product
- True width not disclosed
Evidence · table
“0.200”
Context: 3.90
LBX25-101Ishkōday Project · silverGrade: 2.88Grade Unit: g/tIntercept: 3.9 mView all detailsHide details
Identity
- Hole ID
- LBX25-101
- Project
- Ishkōday Project
- Commodity
- silver
- Region
- canada_on
- Reported Region
- Ontario, Canada
- Ticker
- LME
Geometry
- Grade
- 2.88
- Grade Unit
- g/t
- Intercept
- 3.9 m
- From
- 7.9 m
- To
- 11.8 m
- Hole Depth
- 276 m
Classification
- Deposit Type
- orogenic
- Program
- mixed
- Sample Type
- drill
- Group ID
- LBX25-101:7.90-11.80
Location
- Easting
- 446328
- Northing
- 5513024
- Elevation
- 321 m
- Azimuth
- 127 °
- Dip
- -50 °
- Loc. Confidence
- high
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- blanks, standards, duplicates, check_assays
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-11T00:00:00.000Z
Reasoning: Low-grade silver intercept over a moderate width, contributing to polymetallic mineralization but with a very low GT product.
Negative factors
- Low grade-thickness (GT) product
- True width not disclosed
Evidence · table
“2.88”
Context: 3.90
LBX25-101Ishkōday Project · copperGrade: 0.03Grade Unit: %Intercept: 3.9 mView all detailsHide details
Identity
- Hole ID
- LBX25-101
- Project
- Ishkōday Project
- Commodity
- copper
- Region
- canada_on
- Reported Region
- Ontario, Canada
- Ticker
- LME
Geometry
- Grade
- 0.03
- Grade Unit
- %
- Intercept
- 3.9 m
- From
- 7.9 m
- To
- 11.8 m
- Hole Depth
- 276 m
Classification
- Deposit Type
- orogenic
- Program
- mixed
- Sample Type
- drill
- Group ID
- LBX25-101:7.90-11.80
Location
- Easting
- 446328
- Northing
- 5513024
- Elevation
- 321 m
- Azimuth
- 127 °
- Dip
- -50 °
- Loc. Confidence
- high
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- blanks, standards, duplicates, check_assays
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-11T00:00:00.000Z
Reasoning: Low-grade copper intercept over a moderate width, contributing to polymetallic mineralization but with a very low GT product.
Negative factors
- Low grade-thickness (GT) product
- True width not disclosed
Evidence · table
“0.03”
Context: 3.90
LBX25-101Ishkōday Project · zincGrade: 0.65Grade Unit: %Intercept: 3.9 mView all detailsHide details
Identity
- Hole ID
- LBX25-101
- Project
- Ishkōday Project
- Commodity
- zinc
- Region
- canada_on
- Reported Region
- Ontario, Canada
- Ticker
- LME
Geometry
- Grade
- 0.65
- Grade Unit
- %
- Intercept
- 3.9 m
- From
- 7.9 m
- To
- 11.8 m
- Hole Depth
- 276 m
Classification
- Deposit Type
- orogenic
- Program
- mixed
- Sample Type
- drill
- Group ID
- LBX25-101:7.90-11.80
Location
- Easting
- 446328
- Northing
- 5513024
- Elevation
- 321 m
- Azimuth
- 127 °
- Dip
- -50 °
- Loc. Confidence
- high
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- blanks, standards, duplicates, check_assays
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-11T00:00:00.000Z
Reasoning: Low-grade zinc intercept over a moderate width, contributing to polymetallic mineralization but with a very low GT product.
Negative factors
- Low grade-thickness (GT) product
- True width not disclosed
Evidence · table
“0.65”
Context: 3.90
LBX25-101Ishkōday Project · goldGrade: 0.146Grade Unit: g/tIntercept: 0.7 mView all detailsHide details
Identity
- Hole ID
- LBX25-101
- Project
- Ishkōday Project
- Commodity
- gold
- Region
- canada_on
- Reported Region
- Ontario, Canada
- Ticker
- LME
Geometry
- Grade
- 0.146
- Grade Unit
- g/t
- Intercept
- 0.7 m
- From
- 7.9 m
- To
- 8.6 m
- Hole Depth
- 276 m
Classification
- Deposit Type
- orogenic
- Program
- mixed
- Sample Type
- drill
- Group ID
- LBX25-101:7.90-8.60
Location
- Easting
- 446328
- Northing
- 5513024
- Elevation
- 321 m
- Azimuth
- 127 °
- Dip
- -50 °
- Loc. Confidence
- high
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- blanks, standards, duplicates, check_assays
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-11T00:00:00.000Z
Reasoning: Low-grade gold sub-interval over a narrow width, with a very low GT product.
Negative factors
- Low grade-thickness (GT) product
- True width not disclosed
Evidence · table
“0.146”
Context: 0.70
LBX25-101Ishkōday Project · silverGrade: 9.8Grade Unit: g/tIntercept: 0.7 mView all detailsHide details
Identity
- Hole ID
- LBX25-101
- Project
- Ishkōday Project
- Commodity
- silver
- Region
- canada_on
- Reported Region
- Ontario, Canada
- Ticker
- LME
Geometry
- Grade
- 9.8
- Grade Unit
- g/t
- Intercept
- 0.7 m
- From
- 7.9 m
- To
- 8.6 m
- Hole Depth
- 276 m
Classification
- Deposit Type
- orogenic
- Program
- mixed
- Sample Type
- drill
- Group ID
- LBX25-101:7.90-8.60
Location
- Easting
- 446328
- Northing
- 5513024
- Elevation
- 321 m
- Azimuth
- 127 °
- Dip
- -50 °
- Loc. Confidence
- high
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- blanks, standards, duplicates, check_assays
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-11T00:00:00.000Z
Reasoning: Low-grade silver sub-interval over a narrow width, with a very low GT product.
Negative factors
- Low grade-thickness (GT) product
- True width not disclosed
Evidence · table
“9.80”
Context: 0.70
LBX25-101Ishkōday Project · copperGrade: 0.06Grade Unit: %Intercept: 0.7 mView all detailsHide details
Identity
- Hole ID
- LBX25-101
- Project
- Ishkōday Project
- Commodity
- copper
- Region
- canada_on
- Reported Region
- Ontario, Canada
- Ticker
- LME
Geometry
- Grade
- 0.06
- Grade Unit
- %
- Intercept
- 0.7 m
- From
- 7.9 m
- To
- 8.6 m
- Hole Depth
- 276 m
Classification
- Deposit Type
- orogenic
- Program
- mixed
- Sample Type
- drill
- Group ID
- LBX25-101:7.90-8.60
Location
- Easting
- 446328
- Northing
- 5513024
- Elevation
- 321 m
- Azimuth
- 127 °
- Dip
- -50 °
- Loc. Confidence
- high
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- blanks, standards, duplicates, check_assays
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-11T00:00:00.000Z
Reasoning: Low-grade copper sub-interval over a narrow width, with a very low GT product.
Negative factors
- Low grade-thickness (GT) product
- True width not disclosed
Evidence · table
“0.06”
Context: 0.70
LBX25-101Ishkōday Project · zincGrade: 2.94Grade Unit: %Intercept: 0.7 mView all detailsHide details
Identity
- Hole ID
- LBX25-101
- Project
- Ishkōday Project
- Commodity
- zinc
- Region
- canada_on
- Reported Region
- Ontario, Canada
- Ticker
- LME
Geometry
- Grade
- 2.94
- Grade Unit
- %
- Intercept
- 0.7 m
- From
- 7.9 m
- To
- 8.6 m
- Hole Depth
- 276 m
Classification
- Deposit Type
- orogenic
- Program
- mixed
- Sample Type
- drill
- Group ID
- LBX25-101:7.90-8.60
Location
- Easting
- 446328
- Northing
- 5513024
- Elevation
- 321 m
- Azimuth
- 127 °
- Dip
- -50 °
- Loc. Confidence
- high
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- blanks, standards, duplicates, check_assays
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-11T00:00:00.000Z
Reasoning: Weak zinc grade sub-interval over a narrow width, with a very low GT product.
Negative factors
- Low grade-thickness (GT) product
- True width not disclosed
Evidence · table
“2.94”
Context: 0.70
LBX25-101Ishkōday Project · goldGrade: 0.224Grade Unit: g/tIntercept: 0.6 mView all detailsHide details
Identity
- Hole ID
- LBX25-101
- Project
- Ishkōday Project
- Commodity
- gold
- Region
- canada_on
- Reported Region
- Ontario, Canada
- Ticker
- LME
Geometry
- Grade
- 0.224
- Grade Unit
- g/t
- Intercept
- 0.6 m
- From
- 120.2 m
- To
- 120.8 m
- Hole Depth
- 276 m
Classification
- Deposit Type
- orogenic
- Program
- mixed
- Sample Type
- drill
- Group ID
- LBX25-101:120.2-120.80
Location
- Easting
- 446328
- Northing
- 5513024
- Elevation
- 321 m
- Azimuth
- 127 °
- Dip
- -50 °
- Loc. Confidence
- high
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- blanks, standards, duplicates, check_assays
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-11T00:00:00.000Z
Reasoning: Low-grade gold intercept over a very narrow width, with a very low GT product.
Negative factors
- Low grade-thickness (GT) product
- True width not disclosed
Evidence · table
“0.224”
Context: 0.60
LBX25-101Ishkōday Project · silverGrade: 4.8Grade Unit: g/tIntercept: 0.6 mView all detailsHide details
Identity
- Hole ID
- LBX25-101
- Project
- Ishkōday Project
- Commodity
- silver
- Region
- canada_on
- Reported Region
- Ontario, Canada
- Ticker
- LME
Geometry
- Grade
- 4.8
- Grade Unit
- g/t
- Intercept
- 0.6 m
- From
- 120.2 m
- To
- 120.8 m
- Hole Depth
- 276 m
Classification
- Deposit Type
- orogenic
- Program
- mixed
- Sample Type
- drill
- Group ID
- LBX25-101:120.2-120.80
Location
- Easting
- 446328
- Northing
- 5513024
- Elevation
- 321 m
- Azimuth
- 127 °
- Dip
- -50 °
- Loc. Confidence
- high
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- blanks, standards, duplicates, check_assays
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-11T00:00:00.000Z
Reasoning: Low-grade silver intercept over a very narrow width, with a very low GT product.
Negative factors
- Low grade-thickness (GT) product
- True width not disclosed
Evidence · table
“4.80”
Context: 0.60
LBX25-101Ishkōday Project · copperGrade: 0.12Grade Unit: %Intercept: 0.6 mView all detailsHide details
Identity
- Hole ID
- LBX25-101
- Project
- Ishkōday Project
- Commodity
- copper
- Region
- canada_on
- Reported Region
- Ontario, Canada
- Ticker
- LME
Geometry
- Grade
- 0.12
- Grade Unit
- %
- Intercept
- 0.6 m
- From
- 120.2 m
- To
- 120.8 m
- Hole Depth
- 276 m
Classification
- Deposit Type
- orogenic
- Program
- mixed
- Sample Type
- drill
- Group ID
- LBX25-101:120.2-120.80
Location
- Easting
- 446328
- Northing
- 5513024
- Elevation
- 321 m
- Azimuth
- 127 °
- Dip
- -50 °
- Loc. Confidence
- high
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- blanks, standards, duplicates, check_assays
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-11T00:00:00.000Z
Reasoning: Low-grade copper intercept over a very narrow width, with a very low GT product.
Negative factors
- Low grade-thickness (GT) product
- True width not disclosed
Evidence · table
“0.12”
Context: 0.60
LBX25-101Ishkōday Project · zincGrade: 1.54Grade Unit: %Intercept: 0.6 mView all detailsHide details
Identity
- Hole ID
- LBX25-101
- Project
- Ishkōday Project
- Commodity
- zinc
- Region
- canada_on
- Reported Region
- Ontario, Canada
- Ticker
- LME
Geometry
- Grade
- 1.54
- Grade Unit
- %
- Intercept
- 0.6 m
- From
- 120.2 m
- To
- 120.8 m
- Hole Depth
- 276 m
Classification
- Deposit Type
- orogenic
- Program
- mixed
- Sample Type
- drill
- Group ID
- LBX25-101:120.2-120.80
Location
- Easting
- 446328
- Northing
- 5513024
- Elevation
- 321 m
- Azimuth
- 127 °
- Dip
- -50 °
- Loc. Confidence
- high
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- blanks, standards, duplicates, check_assays
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-11T00:00:00.000Z
Reasoning: Low-grade zinc intercept over a very narrow width, with a very low GT product.
Negative factors
- Low grade-thickness (GT) product
- True width not disclosed
Evidence · table
“1.54”
Context: 0.60
LBX25-101Ishkōday Project · goldGrade: 0.209Grade Unit: g/tIntercept: 37.3 mView all detailsHide details
Identity
- Hole ID
- LBX25-101
- Project
- Ishkōday Project
- Commodity
- gold
- Region
- canada_on
- Reported Region
- Ontario, Canada
- Ticker
- LME
Geometry
- Grade
- 0.209
- Grade Unit
- g/t
- Intercept
- 37.3 m
- From
- 159.2 m
- To
- 196.5 m
- Hole Depth
- 276 m
Classification
- Deposit Type
- orogenic
- Program
- mixed
- Sample Type
- drill
- Group ID
- LBX25-101:159.20-196.50
Location
- Easting
- 446328
- Northing
- 5513024
- Elevation
- 321 m
- Azimuth
- 127 °
- Dip
- -50 °
- Loc. Confidence
- high
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- blanks, standards, duplicates, check_assays
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-11T00:00:00.000Z
Reasoning: Wide intercept of low-grade gold, part of a broader polymetallic zone, but with a very low GT product.
Positive factors
- Wide intercept length
- Polymetallic mineralization
Negative factors
- Low grade-thickness (GT) product
- True width not disclosed
Evidence · table
“0.209”
Context: 37.30
LBX25-101Ishkōday Project · silverGrade: 2.06Grade Unit: g/tIntercept: 37.3 mView all detailsHide details
Identity
- Hole ID
- LBX25-101
- Project
- Ishkōday Project
- Commodity
- silver
- Region
- canada_on
- Reported Region
- Ontario, Canada
- Ticker
- LME
Geometry
- Grade
- 2.06
- Grade Unit
- g/t
- Intercept
- 37.3 m
- From
- 159.2 m
- To
- 196.5 m
- Hole Depth
- 276 m
Classification
- Deposit Type
- orogenic
- Program
- mixed
- Sample Type
- drill
- Group ID
- LBX25-101:159.20-196.50
Location
- Easting
- 446328
- Northing
- 5513024
- Elevation
- 321 m
- Azimuth
- 127 °
- Dip
- -50 °
- Loc. Confidence
- high
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- blanks, standards, duplicates, check_assays
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-11T00:00:00.000Z
Reasoning: Wide intercept of low-grade silver, part of a broader polymetallic zone, but with a very low GT product.
Positive factors
- Wide intercept length
- Polymetallic mineralization
Negative factors
- Low grade-thickness (GT) product
- True width not disclosed
Evidence · table
“2.06”
Context: 37.30
LBX25-101Ishkōday Project · copperGrade: 0.05Grade Unit: %Intercept: 37.3 mView all detailsHide details
Identity
- Hole ID
- LBX25-101
- Project
- Ishkōday Project
- Commodity
- copper
- Region
- canada_on
- Reported Region
- Ontario, Canada
- Ticker
- LME
Geometry
- Grade
- 0.05
- Grade Unit
- %
- Intercept
- 37.3 m
- From
- 159.2 m
- To
- 196.5 m
- Hole Depth
- 276 m
Classification
- Deposit Type
- orogenic
- Program
- mixed
- Sample Type
- drill
- Group ID
- LBX25-101:159.20-196.50
Location
- Easting
- 446328
- Northing
- 5513024
- Elevation
- 321 m
- Azimuth
- 127 °
- Dip
- -50 °
- Loc. Confidence
- high
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- blanks, standards, duplicates, check_assays
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-11T00:00:00.000Z
Reasoning: Wide intercept of low-grade copper, part of a broader polymetallic zone, but with a very low GT product.
Positive factors
- Wide intercept length
- Polymetallic mineralization
Negative factors
- Low grade-thickness (GT) product
- True width not disclosed
Evidence · table
“0.05”
Context: 37.30
LBX25-101Ishkōday Project · zincGrade: 0.87Grade Unit: %Intercept: 37.3 mView all detailsHide details
Identity
- Hole ID
- LBX25-101
- Project
- Ishkōday Project
- Commodity
- zinc
- Region
- canada_on
- Reported Region
- Ontario, Canada
- Ticker
- LME
Geometry
- Grade
- 0.87
- Grade Unit
- %
- Intercept
- 37.3 m
- From
- 159.2 m
- To
- 196.5 m
- Hole Depth
- 276 m
Classification
- Deposit Type
- orogenic
- Program
- mixed
- Sample Type
- drill
- Group ID
- LBX25-101:159.20-196.50
Location
- Easting
- 446328
- Northing
- 5513024
- Elevation
- 321 m
- Azimuth
- 127 °
- Dip
- -50 °
- Loc. Confidence
- high
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- blanks, standards, duplicates, check_assays
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-11T00:00:00.000Z
Reasoning: Wide intercept of low-grade zinc, part of a broader polymetallic zone, but with a very low GT product.
Positive factors
- Wide intercept length
- Polymetallic mineralization
Negative factors
- Low grade-thickness (GT) product
- True width not disclosed
Evidence · table
“0.87”
Context: 37.30
LBX25-101Ishkōday Project · goldGrade: 0.883Grade Unit: g/tIntercept: 1.5 mView all detailsHide details
Identity
- Hole ID
- LBX25-101
- Project
- Ishkōday Project
- Commodity
- gold
- Region
- canada_on
- Reported Region
- Ontario, Canada
- Ticker
- LME
Geometry
- Grade
- 0.883
- Grade Unit
- g/t
- Intercept
- 1.5 m
- From
- 159.2 m
- To
- 160.7 m
- Hole Depth
- 276 m
Classification
- Deposit Type
- orogenic
- Program
- mixed
- Sample Type
- drill
- Group ID
- LBX25-101:159.20-160.70
Location
- Easting
- 446328
- Northing
- 5513024
- Elevation
- 321 m
- Azimuth
- 127 °
- Dip
- -50 °
- Loc. Confidence
- high
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- blanks, standards, duplicates, check_assays
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-11T00:00:00.000Z
Reasoning: Moderate gold grade sub-interval over a narrow width, part of a polymetallic zone, but with a very low GT product.
Positive factors
- Polymetallic mineralization
Negative factors
- Low grade-thickness (GT) product
- True width not disclosed
Evidence · table
“0.883”
Context: 1.50
LBX25-101Ishkōday Project · silverGrade: 13.6Grade Unit: g/tIntercept: 1.5 mView all detailsHide details
Identity
- Hole ID
- LBX25-101
- Project
- Ishkōday Project
- Commodity
- silver
- Region
- canada_on
- Reported Region
- Ontario, Canada
- Ticker
- LME
Geometry
- Grade
- 13.6
- Grade Unit
- g/t
- Intercept
- 1.5 m
- From
- 159.2 m
- To
- 160.7 m
- Hole Depth
- 276 m
Classification
- Deposit Type
- orogenic
- Program
- mixed
- Sample Type
- drill
- Group ID
- LBX25-101:159.20-160.70
Location
- Easting
- 446328
- Northing
- 5513024
- Elevation
- 321 m
- Azimuth
- 127 °
- Dip
- -50 °
- Loc. Confidence
- high
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- blanks, standards, duplicates, check_assays
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-11T00:00:00.000Z
Reasoning: Low-grade silver sub-interval over a narrow width, part of a polymetallic zone, but with a very low GT product.
Positive factors
- Polymetallic mineralization
Negative factors
- Low grade-thickness (GT) product
- True width not disclosed
Evidence · table
“13.60”
Context: 1.50
LBX25-101Ishkōday Project · copperGrade: 0.24Grade Unit: %Intercept: 1.5 mView all detailsHide details
Identity
- Hole ID
- LBX25-101
- Project
- Ishkōday Project
- Commodity
- copper
- Region
- canada_on
- Reported Region
- Ontario, Canada
- Ticker
- LME
Geometry
- Grade
- 0.24
- Grade Unit
- %
- Intercept
- 1.5 m
- From
- 159.2 m
- To
- 160.7 m
- Hole Depth
- 276 m
Classification
- Deposit Type
- orogenic
- Program
- mixed
- Sample Type
- drill
- Group ID
- LBX25-101:159.20-160.70
Location
- Easting
- 446328
- Northing
- 5513024
- Elevation
- 321 m
- Azimuth
- 127 °
- Dip
- -50 °
- Loc. Confidence
- high
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- blanks, standards, duplicates, check_assays
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-11T00:00:00.000Z
Reasoning: Weak copper grade sub-interval over a narrow width, part of a polymetallic zone, but with a very low GT product.
Positive factors
- Polymetallic mineralization
Negative factors
- Low grade-thickness (GT) product
- True width not disclosed
Evidence · table
“0.24”
Context: 1.50
LBX25-101Ishkōday Project · zincGrade: 5.61Grade Unit: %Intercept: 1.5 mView all detailsHide details
Identity
- Hole ID
- LBX25-101
- Project
- Ishkōday Project
- Commodity
- zinc
- Region
- canada_on
- Reported Region
- Ontario, Canada
- Ticker
- LME
Geometry
- Grade
- 5.61
- Grade Unit
- %
- Intercept
- 1.5 m
- From
- 159.2 m
- To
- 160.7 m
- Hole Depth
- 276 m
Classification
- Deposit Type
- orogenic
- Program
- mixed
- Sample Type
- drill
- Group ID
- LBX25-101:159.20-160.70
Location
- Easting
- 446328
- Northing
- 5513024
- Elevation
- 321 m
- Azimuth
- 127 °
- Dip
- -50 °
- Loc. Confidence
- high
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- blanks, standards, duplicates, check_assays
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-11T00:00:00.000Z
Reasoning: Moderate zinc grade sub-interval over a narrow width, part of a polymetallic zone, but with a very low GT product.
Positive factors
- Moderate zinc grade
- Polymetallic mineralization
Negative factors
- Low grade-thickness (GT) product
- True width not disclosed
Evidence · table
“5.61”
Context: 1.50
LBX25-101Ishkōday Project · goldGrade: 2.06Grade Unit: g/tIntercept: 0.5 mView all detailsHide details
Identity
- Hole ID
- LBX25-101
- Project
- Ishkōday Project
- Commodity
- gold
- Region
- canada_on
- Reported Region
- Ontario, Canada
- Ticker
- LME
Geometry
- Grade
- 2.06
- Grade Unit
- g/t
- Intercept
- 0.5 m
- From
- 159.7 m
- To
- 160.2 m
- Hole Depth
- 276 m
Classification
- Deposit Type
- orogenic
- Program
- mixed
- Sample Type
- drill
- Group ID
- LBX25-101:159.70-160.20
Location
- Easting
- 446328
- Northing
- 5513024
- Elevation
- 321 m
- Azimuth
- 127 °
- Dip
- -50 °
- Loc. Confidence
- high
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- blanks, standards, duplicates, check_assays
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-11T00:00:00.000Z
Reasoning: Moderate gold grade sub-interval over a very narrow width, part of a polymetallic zone, but with a very low GT product.
Positive factors
- Moderate gold grade
- Polymetallic mineralization
Negative factors
- Very narrow intercept width
- Low grade-thickness (GT) product
- True width not disclosed
Evidence · table
“2.060”
Context: 0.50
LBX25-101Ishkōday Project · silverGrade: 31.1Grade Unit: g/tIntercept: 0.5 mView all detailsHide details
Identity
- Hole ID
- LBX25-101
- Project
- Ishkōday Project
- Commodity
- silver
- Region
- canada_on
- Reported Region
- Ontario, Canada
- Ticker
- LME
Geometry
- Grade
- 31.1
- Grade Unit
- g/t
- Intercept
- 0.5 m
- From
- 159.7 m
- To
- 160.2 m
- Hole Depth
- 276 m
Classification
- Deposit Type
- orogenic
- Program
- mixed
- Sample Type
- drill
- Group ID
- LBX25-101:159.70-160.20
Location
- Easting
- 446328
- Northing
- 5513024
- Elevation
- 321 m
- Azimuth
- 127 °
- Dip
- -50 °
- Loc. Confidence
- high
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- blanks, standards, duplicates, check_assays
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-11T00:00:00.000Z
Reasoning: Weak silver grade sub-interval over a very narrow width, part of a polymetallic zone, but with a very low GT product.
Positive factors
- Weak silver grade
- Polymetallic mineralization
Negative factors
- Very narrow intercept width
- Low grade-thickness (GT) product
- True width not disclosed
Evidence · table
“31.10”
Context: 0.50
LBX25-101Ishkōday Project · copperGrade: 0.53Grade Unit: %Intercept: 0.5 mView all detailsHide details
Identity
- Hole ID
- LBX25-101
- Project
- Ishkōday Project
- Commodity
- copper
- Region
- canada_on
- Reported Region
- Ontario, Canada
- Ticker
- LME
Geometry
- Grade
- 0.53
- Grade Unit
- %
- Intercept
- 0.5 m
- From
- 159.7 m
- To
- 160.2 m
- Hole Depth
- 276 m
Classification
- Deposit Type
- orogenic
- Program
- mixed
- Sample Type
- drill
- Group ID
- LBX25-101:159.70-160.20
Location
- Easting
- 446328
- Northing
- 5513024
- Elevation
- 321 m
- Azimuth
- 127 °
- Dip
- -50 °
- Loc. Confidence
- high
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- blanks, standards, duplicates, check_assays
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-11T00:00:00.000Z
Reasoning: Moderate copper grade sub-interval over a very narrow width, part of a polymetallic zone, but with a very low GT product.
Positive factors
- Moderate copper grade
- Polymetallic mineralization
Negative factors
- Very narrow intercept width
- Low grade-thickness (GT) product
- True width not disclosed
Evidence · table
“0.53”
Context: 0.50
LBX25-101Ishkōday Project · zincGrade: 12.35Grade Unit: %Intercept: 0.5 mView all detailsHide details
Identity
- Hole ID
- LBX25-101
- Project
- Ishkōday Project
- Commodity
- zinc
- Region
- canada_on
- Reported Region
- Ontario, Canada
- Ticker
- LME
Geometry
- Grade
- 12.35
- Grade Unit
- %
- Intercept
- 0.5 m
- From
- 159.7 m
- To
- 160.2 m
- Hole Depth
- 276 m
Classification
- Deposit Type
- orogenic
- Program
- mixed
- Sample Type
- drill
- Group ID
- LBX25-101:159.70-160.20
Location
- Easting
- 446328
- Northing
- 5513024
- Elevation
- 321 m
- Azimuth
- 127 °
- Dip
- -50 °
- Loc. Confidence
- high
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- blanks, standards, duplicates, check_assays
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-11T00:00:00.000Z
Reasoning: Strong zinc grade sub-interval over a very narrow width, part of a polymetallic zone, but with a very low GT product.
Positive factors
- Strong zinc grade
- Polymetallic mineralization
Negative factors
- Very narrow intercept width
- Low grade-thickness (GT) product
- True width not disclosed
Evidence · table
“12.35”
Context: 0.50
LBX25-101Ishkōday Project · goldGrade: 1.159Grade Unit: g/tIntercept: 1.6 mView all detailsHide details
Identity
- Hole ID
- LBX25-101
- Project
- Ishkōday Project
- Commodity
- gold
- Region
- canada_on
- Reported Region
- Ontario, Canada
- Ticker
- LME
Geometry
- Grade
- 1.159
- Grade Unit
- g/t
- Intercept
- 1.6 m
- From
- 187.7 m
- To
- 189.3 m
- Hole Depth
- 276 m
Classification
- Deposit Type
- orogenic
- Program
- mixed
- Sample Type
- drill
- Group ID
- LBX25-101:187.70-189.30
Location
- Easting
- 446328
- Northing
- 5513024
- Elevation
- 321 m
- Azimuth
- 127 °
- Dip
- -50 °
- Loc. Confidence
- high
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- blanks, standards, duplicates, check_assays
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-11T00:00:00.000Z
Reasoning: Moderate gold grade sub-interval over a narrow width, part of a polymetallic zone, but with a very low GT product.
Positive factors
- Moderate gold grade
- Polymetallic mineralization
Negative factors
- Low grade-thickness (GT) product
- True width not disclosed
Evidence · table
“1.159”
Context: 1.60
LBX25-101Ishkōday Project · silverGrade: 10.21Grade Unit: g/tIntercept: 1.6 mView all detailsHide details
Identity
- Hole ID
- LBX25-101
- Project
- Ishkōday Project
- Commodity
- silver
- Region
- canada_on
- Reported Region
- Ontario, Canada
- Ticker
- LME
Geometry
- Grade
- 10.21
- Grade Unit
- g/t
- Intercept
- 1.6 m
- From
- 187.7 m
- To
- 189.3 m
- Hole Depth
- 276 m
Classification
- Deposit Type
- orogenic
- Program
- mixed
- Sample Type
- drill
- Group ID
- LBX25-101:187.70-189.30
Location
- Easting
- 446328
- Northing
- 5513024
- Elevation
- 321 m
- Azimuth
- 127 °
- Dip
- -50 °
- Loc. Confidence
- high
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- blanks, standards, duplicates, check_assays
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-11T00:00:00.000Z
Reasoning: Low-grade silver sub-interval over a narrow width, part of a polymetallic zone, but with a very low GT product.
Positive factors
- Polymetallic mineralization
Negative factors
- Low grade-thickness (GT) product
- True width not disclosed
Evidence · table
“10.21”
Context: 1.60
LBX25-101Ishkōday Project · copperGrade: 0.3Grade Unit: %Intercept: 1.6 mView all detailsHide details
Identity
- Hole ID
- LBX25-101
- Project
- Ishkōday Project
- Commodity
- copper
- Region
- canada_on
- Reported Region
- Ontario, Canada
- Ticker
- LME
Geometry
- Grade
- 0.3
- Grade Unit
- %
- Intercept
- 1.6 m
- From
- 187.7 m
- To
- 189.3 m
- Hole Depth
- 276 m
Classification
- Deposit Type
- orogenic
- Program
- mixed
- Sample Type
- drill
- Group ID
- LBX25-101:187.70-189.30
Location
- Easting
- 446328
- Northing
- 5513024
- Elevation
- 321 m
- Azimuth
- 127 °
- Dip
- -50 °
- Loc. Confidence
- high
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- blanks, standards, duplicates, check_assays
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-11T00:00:00.000Z
Reasoning: Weak copper grade sub-interval over a narrow width, part of a polymetallic zone, but with a very low GT product.
Positive factors
- Weak copper grade
- Polymetallic mineralization
Negative factors
- Low grade-thickness (GT) product
- True width not disclosed
Evidence · table
“0.30”
Context: 1.60
LBX25-101Ishkōday Project · zincGrade: 4.39Grade Unit: %Intercept: 1.6 mView all detailsHide details
Identity
- Hole ID
- LBX25-101
- Project
- Ishkōday Project
- Commodity
- zinc
- Region
- canada_on
- Reported Region
- Ontario, Canada
- Ticker
- LME
Geometry
- Grade
- 4.39
- Grade Unit
- %
- Intercept
- 1.6 m
- From
- 187.7 m
- To
- 189.3 m
- Hole Depth
- 276 m
Classification
- Deposit Type
- orogenic
- Program
- mixed
- Sample Type
- drill
- Group ID
- LBX25-101:187.70-189.30
Location
- Easting
- 446328
- Northing
- 5513024
- Elevation
- 321 m
- Azimuth
- 127 °
- Dip
- -50 °
- Loc. Confidence
- high
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- blanks, standards, duplicates, check_assays
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-11T00:00:00.000Z
Reasoning: Weak zinc grade sub-interval over a narrow width, part of a polymetallic zone, but with a very low GT product.
Positive factors
- Weak zinc grade
- Polymetallic mineralization
Negative factors
- Low grade-thickness (GT) product
- True width not disclosed
Evidence · table
“4.39”
Context: 1.60
LBX25-101Ishkōday Project · goldGrade: 0.872Grade Unit: g/tIntercept: 5.3 mView all detailsHide details
Identity
- Hole ID
- LBX25-101
- Project
- Ishkōday Project
- Commodity
- gold
- Region
- canada_on
- Reported Region
- Ontario, Canada
- Ticker
- LME
Geometry
- Grade
- 0.872
- Grade Unit
- g/t
- Intercept
- 5.3 m
- From
- 188.2 m
- To
- 193.5 m
- Hole Depth
- 276 m
Classification
- Deposit Type
- orogenic
- Program
- mixed
- Sample Type
- drill
- Group ID
- LBX25-101:188.20-193.50
Location
- Easting
- 446328
- Northing
- 5513024
- Elevation
- 321 m
- Azimuth
- 127 °
- Dip
- -50 °
- Loc. Confidence
- high
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- blanks, standards, duplicates, check_assays
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-11T00:00:00.000Z
Reasoning: Moderate gold grade sub-interval over a moderate width, part of a polymetallic zone, but with a very low GT product.
Positive factors
- Polymetallic mineralization
Negative factors
- Low grade-thickness (GT) product
- True width not disclosed
Evidence · table
“0.872”
Context: 5.30
LBX25-101Ishkōday Project · silverGrade: 5.11Grade Unit: g/tIntercept: 5.3 mView all detailsHide details
Identity
- Hole ID
- LBX25-101
- Project
- Ishkōday Project
- Commodity
- silver
- Region
- canada_on
- Reported Region
- Ontario, Canada
- Ticker
- LME
Geometry
- Grade
- 5.11
- Grade Unit
- g/t
- Intercept
- 5.3 m
- From
- 188.2 m
- To
- 193.5 m
- Hole Depth
- 276 m
Classification
- Deposit Type
- orogenic
- Program
- mixed
- Sample Type
- drill
- Group ID
- LBX25-101:188.20-193.50
Location
- Easting
- 446328
- Northing
- 5513024
- Elevation
- 321 m
- Azimuth
- 127 °
- Dip
- -50 °
- Loc. Confidence
- high
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- blanks, standards, duplicates, check_assays
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-11T00:00:00.000Z
Reasoning: Low-grade silver sub-interval over a moderate width, part of a polymetallic zone, but with a very low GT product.
Positive factors
- Polymetallic mineralization
Negative factors
- Low grade-thickness (GT) product
- True width not disclosed
Evidence · table
“5.11”
Context: 5.30
LBX25-101Ishkōday Project · copperGrade: 0.16Grade Unit: %Intercept: 5.3 mView all detailsHide details
Identity
- Hole ID
- LBX25-101
- Project
- Ishkōday Project
- Commodity
- copper
- Region
- canada_on
- Reported Region
- Ontario, Canada
- Ticker
- LME
Geometry
- Grade
- 0.16
- Grade Unit
- %
- Intercept
- 5.3 m
- From
- 188.2 m
- To
- 193.5 m
- Hole Depth
- 276 m
Classification
- Deposit Type
- orogenic
- Program
- mixed
- Sample Type
- drill
- Group ID
- LBX25-101:188.20-193.50
Location
- Easting
- 446328
- Northing
- 5513024
- Elevation
- 321 m
- Azimuth
- 127 °
- Dip
- -50 °
- Loc. Confidence
- high
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- blanks, standards, duplicates, check_assays
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-11T00:00:00.000Z
Reasoning: Low-grade copper sub-interval over a moderate width, part of a polymetallic zone, but with a very low GT product.
Positive factors
- Polymetallic mineralization
Negative factors
- Low grade-thickness (GT) product
- True width not disclosed
Evidence · table
“0.16”
Context: 5.30
LBX25-101Ishkōday Project · zincGrade: 2.53Grade Unit: %Intercept: 5.3 mView all detailsHide details
Identity
- Hole ID
- LBX25-101
- Project
- Ishkōday Project
- Commodity
- zinc
- Region
- canada_on
- Reported Region
- Ontario, Canada
- Ticker
- LME
Geometry
- Grade
- 2.53
- Grade Unit
- %
- Intercept
- 5.3 m
- From
- 188.2 m
- To
- 193.5 m
- Hole Depth
- 276 m
Classification
- Deposit Type
- orogenic
- Program
- mixed
- Sample Type
- drill
- Group ID
- LBX25-101:188.20-193.50
Location
- Easting
- 446328
- Northing
- 5513024
- Elevation
- 321 m
- Azimuth
- 127 °
- Dip
- -50 °
- Loc. Confidence
- high
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- blanks, standards, duplicates, check_assays
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-11T00:00:00.000Z
Reasoning: Weak zinc grade sub-interval over a moderate width, part of a polymetallic zone, but with a very low GT product.
Positive factors
- Weak zinc grade
- Polymetallic mineralization
Negative factors
- Low grade-thickness (GT) product
- True width not disclosed
Evidence · table
“2.53”
Context: 5.30
LBX25-101Ishkōday Project · goldGrade: 0.971Grade Unit: g/tIntercept: 3 mView all detailsHide details
Identity
- Hole ID
- LBX25-101
- Project
- Ishkōday Project
- Commodity
- gold
- Region
- canada_on
- Reported Region
- Ontario, Canada
- Ticker
- LME
Geometry
- Grade
- 0.971
- Grade Unit
- g/t
- Intercept
- 3 m
- From
- 190.5 m
- To
- 193.5 m
- Hole Depth
- 276 m
Classification
- Deposit Type
- orogenic
- Program
- mixed
- Sample Type
- drill
- Group ID
- LBX25-101:190.50-193.50
Location
- Easting
- 446328
- Northing
- 5513024
- Elevation
- 321 m
- Azimuth
- 127 °
- Dip
- -50 °
- Loc. Confidence
- high
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- blanks, standards, duplicates, check_assays
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-11T00:00:00.000Z
Reasoning: Moderate gold grade sub-interval over a narrow width, part of a polymetallic zone, but with a very low GT product.
Positive factors
- Polymetallic mineralization
Negative factors
- Low grade-thickness (GT) product
- True width not disclosed
Evidence · table
“0.971”
Context: 3.00
LBX25-101Ishkōday Project · silverGrade: 4.04Grade Unit: g/tIntercept: 3 mView all detailsHide details
Identity
- Hole ID
- LBX25-101
- Project
- Ishkōday Project
- Commodity
- silver
- Region
- canada_on
- Reported Region
- Ontario, Canada
- Ticker
- LME
Geometry
- Grade
- 4.04
- Grade Unit
- g/t
- Intercept
- 3 m
- From
- 190.5 m
- To
- 193.5 m
- Hole Depth
- 276 m
Classification
- Deposit Type
- orogenic
- Program
- mixed
- Sample Type
- drill
- Group ID
- LBX25-101:190.50-193.50
Location
- Easting
- 446328
- Northing
- 5513024
- Elevation
- 321 m
- Azimuth
- 127 °
- Dip
- -50 °
- Loc. Confidence
- high
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- blanks, standards, duplicates, check_assays
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-11T00:00:00.000Z
Reasoning: Low-grade silver sub-interval over a narrow width, part of a polymetallic zone, but with a very low GT product.
Positive factors
- Polymetallic mineralization
Negative factors
- Low grade-thickness (GT) product
- True width not disclosed
Evidence · table
“4.04”
Context: 3.00
LBX25-101Ishkōday Project · copperGrade: 0.14Grade Unit: %Intercept: 3 mView all detailsHide details
Identity
- Hole ID
- LBX25-101
- Project
- Ishkōday Project
- Commodity
- copper
- Region
- canada_on
- Reported Region
- Ontario, Canada
- Ticker
- LME
Geometry
- Grade
- 0.14
- Grade Unit
- %
- Intercept
- 3 m
- From
- 190.5 m
- To
- 193.5 m
- Hole Depth
- 276 m
Classification
- Deposit Type
- orogenic
- Program
- mixed
- Sample Type
- drill
- Group ID
- LBX25-101:190.50-193.50
Location
- Easting
- 446328
- Northing
- 5513024
- Elevation
- 321 m
- Azimuth
- 127 °
- Dip
- -50 °
- Loc. Confidence
- high
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- blanks, standards, duplicates, check_assays
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-11T00:00:00.000Z
Reasoning: Low-grade copper sub-interval over a narrow width, part of a polymetallic zone, but with a very low GT product.
Positive factors
- Polymetallic mineralization
Negative factors
- Low grade-thickness (GT) product
- True width not disclosed
Evidence · table
“0.14”
Context: 3.00
LBX25-101Ishkōday Project · zincGrade: 2.21Grade Unit: %Intercept: 3 mView all detailsHide details
Identity
- Hole ID
- LBX25-101
- Project
- Ishkōday Project
- Commodity
- zinc
- Region
- canada_on
- Reported Region
- Ontario, Canada
- Ticker
- LME
Geometry
- Grade
- 2.21
- Grade Unit
- %
- Intercept
- 3 m
- From
- 190.5 m
- To
- 193.5 m
- Hole Depth
- 276 m
Classification
- Deposit Type
- orogenic
- Program
- mixed
- Sample Type
- drill
- Group ID
- LBX25-101:190.50-193.50
Location
- Easting
- 446328
- Northing
- 5513024
- Elevation
- 321 m
- Azimuth
- 127 °
- Dip
- -50 °
- Loc. Confidence
- high
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- blanks, standards, duplicates, check_assays
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-11T00:00:00.000Z
Reasoning: Weak zinc grade sub-interval over a narrow width, part of a polymetallic zone, but with a very low GT product.
Positive factors
- Weak zinc grade
- Polymetallic mineralization
Negative factors
- Low grade-thickness (GT) product
- True width not disclosed
Evidence · table
“2.21”
Context: 3.00
LBX25-102Ishkōday Project · goldGrade: 3.89Grade Unit: g/tIntercept: 0.5 mView all detailsHide details
Identity
- Hole ID
- LBX25-102
- Project
- Ishkōday Project
- Commodity
- gold
- Region
- canada_on
- Reported Region
- Ontario, Canada
- Ticker
- LME
Geometry
- Grade
- 3.89
- Grade Unit
- g/t
- Intercept
- 0.5 m
- From
- 45 m
- To
- 45.5 m
- Hole Depth
- 300 m
Classification
- Deposit Type
- orogenic
- Program
- mixed
- Sample Type
- drill
- Group ID
- LBX25-102:45.00-45.50
Location
- Easting
- 446200
- Northing
- 5512713
- Elevation
- 323 m
- Azimuth
- 115 °
- Dip
- -50 °
- Loc. Confidence
- high
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- blanks, standards, duplicates, check_assays
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-11T00:00:00.000Z
Reasoning: Moderate gold grade intercept over a very narrow width, part of a polymetallic zone, but with a very low GT product.
Positive factors
- Moderate gold grade
- Polymetallic mineralization
Negative factors
- Very narrow intercept width
- Low grade-thickness (GT) product
- True width not disclosed
Evidence · table
“3.890”
Context: 0.50
LBX25-102Ishkōday Project · silverGrade: 38.7Grade Unit: g/tIntercept: 0.5 mView all detailsHide details
Identity
- Hole ID
- LBX25-102
- Project
- Ishkōday Project
- Commodity
- silver
- Region
- canada_on
- Reported Region
- Ontario, Canada
- Ticker
- LME
Geometry
- Grade
- 38.7
- Grade Unit
- g/t
- Intercept
- 0.5 m
- From
- 45 m
- To
- 45.5 m
- Hole Depth
- 300 m
Classification
- Deposit Type
- orogenic
- Program
- mixed
- Sample Type
- drill
- Group ID
- LBX25-102:45.00-45.50
Location
- Easting
- 446200
- Northing
- 5512713
- Elevation
- 323 m
- Azimuth
- 115 °
- Dip
- -50 °
- Loc. Confidence
- high
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- blanks, standards, duplicates, check_assays
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-11T00:00:00.000Z
Reasoning: Weak silver grade intercept over a very narrow width, part of a polymetallic zone, but with a very low GT product.
Positive factors
- Weak silver grade
- Polymetallic mineralization
Negative factors
- Very narrow intercept width
- Low grade-thickness (GT) product
- True width not disclosed
Evidence · table
“38.70”
Context: 0.50
LBX25-102Ishkōday Project · copperGrade: 0.42Grade Unit: %Intercept: 0.5 mView all detailsHide details
Identity
- Hole ID
- LBX25-102
- Project
- Ishkōday Project
- Commodity
- copper
- Region
- canada_on
- Reported Region
- Ontario, Canada
- Ticker
- LME
Geometry
- Grade
- 0.42
- Grade Unit
- %
- Intercept
- 0.5 m
- From
- 45 m
- To
- 45.5 m
- Hole Depth
- 300 m
Classification
- Deposit Type
- orogenic
- Program
- mixed
- Sample Type
- drill
- Group ID
- LBX25-102:45.00-45.50
Location
- Easting
- 446200
- Northing
- 5512713
- Elevation
- 323 m
- Azimuth
- 115 °
- Dip
- -50 °
- Loc. Confidence
- high
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- blanks, standards, duplicates, check_assays
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-11T00:00:00.000Z
Reasoning: Weak copper grade intercept over a very narrow width, part of a polymetallic zone, but with a very low GT product.
Positive factors
- Weak copper grade
- Polymetallic mineralization
Negative factors
- Very narrow intercept width
- Low grade-thickness (GT) product
- True width not disclosed
Evidence · table
“0.42”
Context: 0.50
LBX25-102Ishkōday Project · zincGrade: 5.37Grade Unit: %Intercept: 0.5 mView all detailsHide details
Identity
- Hole ID
- LBX25-102
- Project
- Ishkōday Project
- Commodity
- zinc
- Region
- canada_on
- Reported Region
- Ontario, Canada
- Ticker
- LME
Geometry
- Grade
- 5.37
- Grade Unit
- %
- Intercept
- 0.5 m
- From
- 45 m
- To
- 45.5 m
- Hole Depth
- 300 m
Classification
- Deposit Type
- orogenic
- Program
- mixed
- Sample Type
- drill
- Group ID
- LBX25-102:45.00-45.50
Location
- Easting
- 446200
- Northing
- 5512713
- Elevation
- 323 m
- Azimuth
- 115 °
- Dip
- -50 °
- Loc. Confidence
- high
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- blanks, standards, duplicates, check_assays
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-11T00:00:00.000Z
Reasoning: Moderate zinc grade intercept over a very narrow width, part of a polymetallic zone, but with a very low GT product.
Positive factors
- Moderate zinc grade
- Polymetallic mineralization
Negative factors
- Very narrow intercept width
- Low grade-thickness (GT) product
- True width not disclosed
Evidence · table
“5.37”
Context: 0.50
LBX25-102Ishkōday Project · goldGrade: 0.617Grade Unit: g/tIntercept: 0.5 mView all detailsHide details
Identity
- Hole ID
- LBX25-102
- Project
- Ishkōday Project
- Commodity
- gold
- Region
- canada_on
- Reported Region
- Ontario, Canada
- Ticker
- LME
Geometry
- Grade
- 0.617
- Grade Unit
- g/t
- Intercept
- 0.5 m
- From
- 52.8 m
- To
- 53.3 m
- Hole Depth
- 300 m
Classification
- Deposit Type
- orogenic
- Program
- mixed
- Sample Type
- drill
- Group ID
- LBX25-102:52.80-53.30
Location
- Easting
- 446200
- Northing
- 5512713
- Elevation
- 323 m
- Azimuth
- 115 °
- Dip
- -50 °
- Loc. Confidence
- high
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- blanks, standards, duplicates, check_assays
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-11T00:00:00.000Z
Reasoning: Low-grade gold intercept over a very narrow width, with a very low GT product.
Negative factors
- Very narrow intercept width
- Low grade-thickness (GT) product
- True width not disclosed
Evidence · table
“0.617”
Context: 0.50
LBX25-102Ishkōday Project · silverGrade: 3.9Grade Unit: g/tIntercept: 0.5 mView all detailsHide details
Identity
- Hole ID
- LBX25-102
- Project
- Ishkōday Project
- Commodity
- silver
- Region
- canada_on
- Reported Region
- Ontario, Canada
- Ticker
- LME
Geometry
- Grade
- 3.9
- Grade Unit
- g/t
- Intercept
- 0.5 m
- From
- 52.8 m
- To
- 53.3 m
- Hole Depth
- 300 m
Classification
- Deposit Type
- orogenic
- Program
- mixed
- Sample Type
- drill
- Group ID
- LBX25-102:52.80-53.30
Location
- Easting
- 446200
- Northing
- 5512713
- Elevation
- 323 m
- Azimuth
- 115 °
- Dip
- -50 °
- Loc. Confidence
- high
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- blanks, standards, duplicates, check_assays
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-11T00:00:00.000Z
Reasoning: Low-grade silver intercept over a very narrow width, with a very low GT product.
Negative factors
- Very narrow intercept width
- Low grade-thickness (GT) product
- True width not disclosed
Evidence · table
“3.90”
Context: 0.50
LBX25-102Ishkōday Project · copperGrade: 0.03Grade Unit: %Intercept: 0.5 mView all detailsHide details
Identity
- Hole ID
- LBX25-102
- Project
- Ishkōday Project
- Commodity
- copper
- Region
- canada_on
- Reported Region
- Ontario, Canada
- Ticker
- LME
Geometry
- Grade
- 0.03
- Grade Unit
- %
- Intercept
- 0.5 m
- From
- 52.8 m
- To
- 53.3 m
- Hole Depth
- 300 m
Classification
- Deposit Type
- orogenic
- Program
- mixed
- Sample Type
- drill
- Group ID
- LBX25-102:52.80-53.30
Location
- Easting
- 446200
- Northing
- 5512713
- Elevation
- 323 m
- Azimuth
- 115 °
- Dip
- -50 °
- Loc. Confidence
- high
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- blanks, standards, duplicates, check_assays
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-11T00:00:00.000Z
Reasoning: Low-grade copper intercept over a very narrow width, with a very low GT product.
Negative factors
- Very narrow intercept width
- Low grade-thickness (GT) product
- True width not disclosed
Evidence · table
“0.03”
Context: 0.50
LBX25-102Ishkōday Project · zincGrade: 3.25Grade Unit: %Intercept: 0.5 mView all detailsHide details
Identity
- Hole ID
- LBX25-102
- Project
- Ishkōday Project
- Commodity
- zinc
- Region
- canada_on
- Reported Region
- Ontario, Canada
- Ticker
- LME
Geometry
- Grade
- 3.25
- Grade Unit
- %
- Intercept
- 0.5 m
- From
- 52.8 m
- To
- 53.3 m
- Hole Depth
- 300 m
Classification
- Deposit Type
- orogenic
- Program
- mixed
- Sample Type
- drill
- Group ID
- LBX25-102:52.80-53.30
Location
- Easting
- 446200
- Northing
- 5512713
- Elevation
- 323 m
- Azimuth
- 115 °
- Dip
- -50 °
- Loc. Confidence
- high
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- blanks, standards, duplicates, check_assays
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-11T00:00:00.000Z
Reasoning: Weak zinc grade intercept over a very narrow width, with a very low GT product.
Positive factors
- Weak zinc grade
Negative factors
- Very narrow intercept width
- Low grade-thickness (GT) product
- True width not disclosed
Evidence · table
“3.25”
Context: 0.50
LBX25-102Ishkōday Project · goldGrade: 0.511Grade Unit: g/tIntercept: 0.8 mView all detailsHide details
Identity
- Hole ID
- LBX25-102
- Project
- Ishkōday Project
- Commodity
- gold
- Region
- canada_on
- Reported Region
- Ontario, Canada
- Ticker
- LME
Geometry
- Grade
- 0.511
- Grade Unit
- g/t
- Intercept
- 0.8 m
- From
- 82.9 m
- To
- 83.7 m
- Hole Depth
- 300 m
Classification
- Deposit Type
- orogenic
- Program
- mixed
- Sample Type
- drill
- Group ID
- LBX25-102:82.90-83.70
Location
- Easting
- 446200
- Northing
- 5512713
- Elevation
- 323 m
- Azimuth
- 115 °
- Dip
- -50 °
- Loc. Confidence
- high
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- blanks, standards, duplicates, check_assays
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-11T00:00:00.000Z
Reasoning: Low-grade gold intercept over a very narrow width, with a very low GT product.
Negative factors
- Low grade-thickness (GT) product
- True width not disclosed
Evidence · table
“0.511”
Context: 0.80
LBX25-102Ishkōday Project · silverGrade: 0.5Grade Unit: g/tIntercept: 0.8 mView all detailsHide details
Identity
- Hole ID
- LBX25-102
- Project
- Ishkōday Project
- Commodity
- silver
- Region
- canada_on
- Reported Region
- Ontario, Canada
- Ticker
- LME
Geometry
- Grade
- 0.5
- Grade Unit
- g/t
- Intercept
- 0.8 m
- From
- 82.9 m
- To
- 83.7 m
- Hole Depth
- 300 m
Classification
- Deposit Type
- orogenic
- Program
- mixed
- Sample Type
- drill
- Group ID
- LBX25-102:82.90-83.70
Location
- Easting
- 446200
- Northing
- 5512713
- Elevation
- 323 m
- Azimuth
- 115 °
- Dip
- -50 °
- Loc. Confidence
- high
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- blanks, standards, duplicates, check_assays
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-11T00:00:00.000Z
Reasoning: Very low-grade silver intercept over a very narrow width, with a very low GT product.
Negative factors
- Low grade-thickness (GT) product
- True width not disclosed
Evidence · table
“0.50”
Context: 0.80
LBX25-102Ishkōday Project · copperGrade Unit: %Intercept: 0.8 mView all detailsHide details
Identity
- Hole ID
- LBX25-102
- Project
- Ishkōday Project
- Commodity
- copper
- Region
- canada_on
- Reported Region
- Ontario, Canada
- Ticker
- LME
Geometry
- Grade Unit
- %
- Intercept
- 0.8 m
- From
- 82.9 m
- To
- 83.7 m
- Hole Depth
- 300 m
Classification
- Deposit Type
- orogenic
- Program
- mixed
- Sample Type
- drill
- Group ID
- LBX25-102:82.90-83.70
Location
- Easting
- 446200
- Northing
- 5512713
- Elevation
- 323 m
- Azimuth
- 115 °
- Dip
- -50 °
- Loc. Confidence
- high
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- blanks, standards, duplicates, check_assays
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-11T00:00:00.000Z
Reasoning: No copper grade reported for this narrow intercept.
Negative factors
- No grade reported
- True width not disclosed
Evidence · table
“-”
Context: 0.80
LBX25-102Ishkōday Project · zincGrade: 0.01Grade Unit: %Intercept: 0.8 mView all detailsHide details
Identity
- Hole ID
- LBX25-102
- Project
- Ishkōday Project
- Commodity
- zinc
- Region
- canada_on
- Reported Region
- Ontario, Canada
- Ticker
- LME
Geometry
- Grade
- 0.01
- Grade Unit
- %
- Intercept
- 0.8 m
- From
- 82.9 m
- To
- 83.7 m
- Hole Depth
- 300 m
Classification
- Deposit Type
- orogenic
- Program
- mixed
- Sample Type
- drill
- Group ID
- LBX25-102:82.90-83.70
Location
- Easting
- 446200
- Northing
- 5512713
- Elevation
- 323 m
- Azimuth
- 115 °
- Dip
- -50 °
- Loc. Confidence
- high
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- blanks, standards, duplicates, check_assays
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-11T00:00:00.000Z
Reasoning: Very low-grade zinc intercept over a very narrow width, with a very low GT product.
Negative factors
- Low grade-thickness (GT) product
- True width not disclosed
Evidence · table
“0.01”
Context: 0.80
LBX25-102Ishkōday Project · goldGrade: 2.04Grade Unit: g/tIntercept: 1 mView all detailsHide details
Identity
- Hole ID
- LBX25-102
- Project
- Ishkōday Project
- Commodity
- gold
- Region
- canada_on
- Reported Region
- Ontario, Canada
- Ticker
- LME
Geometry
- Grade
- 2.04
- Grade Unit
- g/t
- Intercept
- 1 m
- From
- 108.5 m
- To
- 109.5 m
- Hole Depth
- 300 m
Classification
- Deposit Type
- orogenic
- Program
- mixed
- Sample Type
- drill
- Group ID
- LBX25-102:108.50-109.50
Location
- Easting
- 446200
- Northing
- 5512713
- Elevation
- 323 m
- Azimuth
- 115 °
- Dip
- -50 °
- Loc. Confidence
- high
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- blanks, standards, duplicates, check_assays
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-11T00:00:00.000Z
Reasoning: Moderate gold grade intercept over a narrow width, but with a very low GT product.
Positive factors
- Moderate gold grade
Negative factors
- Narrow intercept width
- Low grade-thickness (GT) product
- True width not disclosed
Evidence · table
“2.040”
Context: 1.00
LBX25-102Ishkōday Project · silverGrade: 0.8Grade Unit: g/tIntercept: 1 mView all detailsHide details
Identity
- Hole ID
- LBX25-102
- Project
- Ishkōday Project
- Commodity
- silver
- Region
- canada_on
- Reported Region
- Ontario, Canada
- Ticker
- LME
Geometry
- Grade
- 0.8
- Grade Unit
- g/t
- Intercept
- 1 m
- From
- 108.5 m
- To
- 109.5 m
- Hole Depth
- 300 m
Classification
- Deposit Type
- orogenic
- Program
- mixed
- Sample Type
- drill
- Group ID
- LBX25-102:108.50-109.50
Location
- Easting
- 446200
- Northing
- 5512713
- Elevation
- 323 m
- Azimuth
- 115 °
- Dip
- -50 °
- Loc. Confidence
- high
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- blanks, standards, duplicates, check_assays
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-11T00:00:00.000Z
Reasoning: Very low-grade silver intercept over a narrow width, with a very low GT product.
Negative factors
- Narrow intercept width
- Low grade-thickness (GT) product
- True width not disclosed
Evidence · table
“0.80”
Context: 1.00
LBX25-102Ishkōday Project · copperGrade: 0.01Grade Unit: %Intercept: 1 mView all detailsHide details
Identity
- Hole ID
- LBX25-102
- Project
- Ishkōday Project
- Commodity
- copper
- Region
- canada_on
- Reported Region
- Ontario, Canada
- Ticker
- LME
Geometry
- Grade
- 0.01
- Grade Unit
- %
- Intercept
- 1 m
- From
- 108.5 m
- To
- 109.5 m
- Hole Depth
- 300 m
Classification
- Deposit Type
- orogenic
- Program
- mixed
- Sample Type
- drill
- Group ID
- LBX25-102:108.50-109.50
Location
- Easting
- 446200
- Northing
- 5512713
- Elevation
- 323 m
- Azimuth
- 115 °
- Dip
- -50 °
- Loc. Confidence
- high
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- blanks, standards, duplicates, check_assays
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-11T00:00:00.000Z
Reasoning: Very low-grade copper intercept over a narrow width, with a very low GT product.
Negative factors
- Narrow intercept width
- Low grade-thickness (GT) product
- True width not disclosed
Evidence · table
“0.01”
Context: 1.00
LBX25-102Ishkōday Project · zincGrade: 0.02Grade Unit: %Intercept: 1 mView all detailsHide details
Identity
- Hole ID
- LBX25-102
- Project
- Ishkōday Project
- Commodity
- zinc
- Region
- canada_on
- Reported Region
- Ontario, Canada
- Ticker
- LME
Geometry
- Grade
- 0.02
- Grade Unit
- %
- Intercept
- 1 m
- From
- 108.5 m
- To
- 109.5 m
- Hole Depth
- 300 m
Classification
- Deposit Type
- orogenic
- Program
- mixed
- Sample Type
- drill
- Group ID
- LBX25-102:108.50-109.50
Location
- Easting
- 446200
- Northing
- 5512713
- Elevation
- 323 m
- Azimuth
- 115 °
- Dip
- -50 °
- Loc. Confidence
- high
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- blanks, standards, duplicates, check_assays
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-11T00:00:00.000Z
Reasoning: Very low-grade zinc intercept over a narrow width, with a very low GT product.
Negative factors
- Narrow intercept width
- Low grade-thickness (GT) product
- True width not disclosed
Evidence · table
“0.02”
Context: 1.00
LBX25-102Ishkōday Project · goldGrade: 2.63Grade Unit: g/tIntercept: 2.04 mView all detailsHide details
Identity
- Hole ID
- LBX25-102
- Project
- Ishkōday Project
- Commodity
- gold
- Region
- canada_on
- Reported Region
- Ontario, Canada
- Ticker
- LME
Geometry
- Grade
- 2.63
- Grade Unit
- g/t
- Intercept
- 2.04 m
- From
- 205.96 m
- To
- 208 m
- Hole Depth
- 300 m
Classification
- Deposit Type
- orogenic
- Program
- mixed
- Sample Type
- drill
- Group ID
- LBX25-102:205.96-208.00
Location
- Easting
- 446200
- Northing
- 5512713
- Elevation
- 323 m
- Azimuth
- 115 °
- Dip
- -50 °
- Loc. Confidence
- high
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- blanks, standards, duplicates, check_assays
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-11T00:00:00.000Z
Reasoning: Weak gold grade intercept over a narrow width, but with a very low GT product.
Positive factors
- Weak gold grade
Negative factors
- Narrow intercept width
- Low grade-thickness (GT) product
- True width not disclosed
Evidence · table
“2.630”
Context: 2.04
LBX25-102Ishkōday Project · silverGrade: 2.38Grade Unit: g/tIntercept: 2.04 mView all detailsHide details
Identity
- Hole ID
- LBX25-102
- Project
- Ishkōday Project
- Commodity
- silver
- Region
- canada_on
- Reported Region
- Ontario, Canada
- Ticker
- LME
Geometry
- Grade
- 2.38
- Grade Unit
- g/t
- Intercept
- 2.04 m
- From
- 205.96 m
- To
- 208 m
- Hole Depth
- 300 m
Classification
- Deposit Type
- orogenic
- Program
- mixed
- Sample Type
- drill
- Group ID
- LBX25-102:205.96-208.00
Location
- Easting
- 446200
- Northing
- 5512713
- Elevation
- 323 m
- Azimuth
- 115 °
- Dip
- -50 °
- Loc. Confidence
- high
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- blanks, standards, duplicates, check_assays
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-11T00:00:00.000Z
Reasoning: Low-grade silver intercept over a narrow width, with a very low GT product.
Negative factors
- Narrow intercept width
- Low grade-thickness (GT) product
- True width not disclosed
Evidence · table
“2.38”
Context: 2.04
LBX25-102Ishkōday Project · copperGrade: 0.02Grade Unit: %Intercept: 2.04 mView all detailsHide details
Identity
- Hole ID
- LBX25-102
- Project
- Ishkōday Project
- Commodity
- copper
- Region
- canada_on
- Reported Region
- Ontario, Canada
- Ticker
- LME
Geometry
- Grade
- 0.02
- Grade Unit
- %
- Intercept
- 2.04 m
- From
- 205.96 m
- To
- 208 m
- Hole Depth
- 300 m
Classification
- Deposit Type
- orogenic
- Program
- mixed
- Sample Type
- drill
- Group ID
- LBX25-102:205.96-208.00
Location
- Easting
- 446200
- Northing
- 5512713
- Elevation
- 323 m
- Azimuth
- 115 °
- Dip
- -50 °
- Loc. Confidence
- high
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- blanks, standards, duplicates, check_assays
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-11T00:00:00.000Z
Reasoning: Very low-grade copper intercept over a narrow width, with a very low GT product.
Negative factors
- Narrow intercept width
- Low grade-thickness (GT) product
- True width not disclosed
Evidence · table
“0.02”
Context: 2.04
LBX25-102Ishkōday Project · zincGrade: 0.17Grade Unit: %Intercept: 2.04 mView all detailsHide details
Identity
- Hole ID
- LBX25-102
- Project
- Ishkōday Project
- Commodity
- zinc
- Region
- canada_on
- Reported Region
- Ontario, Canada
- Ticker
- LME
Geometry
- Grade
- 0.17
- Grade Unit
- %
- Intercept
- 2.04 m
- From
- 205.96 m
- To
- 208 m
- Hole Depth
- 300 m
Classification
- Deposit Type
- orogenic
- Program
- mixed
- Sample Type
- drill
- Group ID
- LBX25-102:205.96-208.00
Location
- Easting
- 446200
- Northing
- 5512713
- Elevation
- 323 m
- Azimuth
- 115 °
- Dip
- -50 °
- Loc. Confidence
- high
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- blanks, standards, duplicates, check_assays
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-11T00:00:00.000Z
Reasoning: Very low-grade zinc intercept over a narrow width, with a very low GT product.
Negative factors
- Narrow intercept width
- Low grade-thickness (GT) product
- True width not disclosed
Evidence · table
“0.17”
Context: 2.04
LBX25-102Ishkōday Project · goldGrade: 5.14Grade Unit: g/tIntercept: 1 mView all detailsHide details
Identity
- Hole ID
- LBX25-102
- Project
- Ishkōday Project
- Commodity
- gold
- Region
- canada_on
- Reported Region
- Ontario, Canada
- Ticker
- LME
Geometry
- Grade
- 5.14
- Grade Unit
- g/t
- Intercept
- 1 m
- From
- 207 m
- To
- 208 m
- Hole Depth
- 300 m
Classification
- Deposit Type
- orogenic
- Program
- mixed
- Sample Type
- drill
- Group ID
- LBX25-102:207.00-208.00
Location
- Easting
- 446200
- Northing
- 5512713
- Elevation
- 323 m
- Azimuth
- 115 °
- Dip
- -50 °
- Loc. Confidence
- high
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- blanks, standards, duplicates, check_assays
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-11T00:00:00.000Z
Reasoning: Strong gold grade sub-interval over a narrow width, but with a very low GT product.
Positive factors
- Strong gold grade
Negative factors
- Narrow intercept width
- Low grade-thickness (GT) product
- True width not disclosed
Evidence · table
“5.140”
Context: 1.00
LBX25-102Ishkōday Project · silverGrade: 4.6Grade Unit: g/tIntercept: 1 mView all detailsHide details
Identity
- Hole ID
- LBX25-102
- Project
- Ishkōday Project
- Commodity
- silver
- Region
- canada_on
- Reported Region
- Ontario, Canada
- Ticker
- LME
Geometry
- Grade
- 4.6
- Grade Unit
- g/t
- Intercept
- 1 m
- From
- 207 m
- To
- 208 m
- Hole Depth
- 300 m
Classification
- Deposit Type
- orogenic
- Program
- mixed
- Sample Type
- drill
- Group ID
- LBX25-102:207.00-208.00
Location
- Easting
- 446200
- Northing
- 5512713
- Elevation
- 323 m
- Azimuth
- 115 °
- Dip
- -50 °
- Loc. Confidence
- high
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- blanks, standards, duplicates, check_assays
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-11T00:00:00.000Z
Reasoning: Low-grade silver sub-interval over a narrow width, with a very low GT product.
Negative factors
- Narrow intercept width
- Low grade-thickness (GT) product
- True width not disclosed
Evidence · table
“4.60”
Context: 1.00
LBX25-102Ishkōday Project · copperGrade: 0.04Grade Unit: %Intercept: 1 mView all detailsHide details
Identity
- Hole ID
- LBX25-102
- Project
- Ishkōday Project
- Commodity
- copper
- Region
- canada_on
- Reported Region
- Ontario, Canada
- Ticker
- LME
Geometry
- Grade
- 0.04
- Grade Unit
- %
- Intercept
- 1 m
- From
- 207 m
- To
- 208 m
- Hole Depth
- 300 m
Classification
- Deposit Type
- orogenic
- Program
- mixed
- Sample Type
- drill
- Group ID
- LBX25-102:207.00-208.00
Location
- Easting
- 446200
- Northing
- 5512713
- Elevation
- 323 m
- Azimuth
- 115 °
- Dip
- -50 °
- Loc. Confidence
- high
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- blanks, standards, duplicates, check_assays
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-11T00:00:00.000Z
Reasoning: Very low-grade copper sub-interval over a narrow width, with a very low GT product.
Negative factors
- Narrow intercept width
- Low grade-thickness (GT) product
- True width not disclosed
Evidence · table
“0.04”
Context: 1.00
LBX25-102Ishkōday Project · zincGrade: 0.3Grade Unit: %Intercept: 1 mView all detailsHide details
Identity
- Hole ID
- LBX25-102
- Project
- Ishkōday Project
- Commodity
- zinc
- Region
- canada_on
- Reported Region
- Ontario, Canada
- Ticker
- LME
Geometry
- Grade
- 0.3
- Grade Unit
- %
- Intercept
- 1 m
- From
- 207 m
- To
- 208 m
- Hole Depth
- 300 m
Classification
- Deposit Type
- orogenic
- Program
- mixed
- Sample Type
- drill
- Group ID
- LBX25-102:207.00-208.00
Location
- Easting
- 446200
- Northing
- 5512713
- Elevation
- 323 m
- Azimuth
- 115 °
- Dip
- -50 °
- Loc. Confidence
- high
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- blanks, standards, duplicates, check_assays
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-11T00:00:00.000Z
Reasoning: Very low-grade zinc sub-interval over a narrow width, with a very low GT product.
Negative factors
- Narrow intercept width
- Low grade-thickness (GT) product
- True width not disclosed
Evidence · table
“0.30”
Context: 1.00
LBX25-102Ishkōday Project · goldGrade: 0.339Grade Unit: g/tIntercept: 1 mView all detailsHide details
Identity
- Hole ID
- LBX25-102
- Project
- Ishkōday Project
- Commodity
- gold
- Region
- canada_on
- Reported Region
- Ontario, Canada
- Ticker
- LME
Geometry
- Grade
- 0.339
- Grade Unit
- g/t
- Intercept
- 1 m
- From
- 212 m
- To
- 213 m
- Hole Depth
- 300 m
Classification
- Deposit Type
- orogenic
- Program
- mixed
- Sample Type
- drill
- Group ID
- LBX25-102:212.00-213.00
Location
- Easting
- 446200
- Northing
- 5512713
- Elevation
- 323 m
- Azimuth
- 115 °
- Dip
- -50 °
- Loc. Confidence
- high
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- blanks, standards, duplicates, check_assays
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-11T00:00:00.000Z
Reasoning: Low-grade gold intercept over a narrow width, with a very low GT product.
Negative factors
- Narrow intercept width
- Low grade-thickness (GT) product
- True width not disclosed
Evidence · table
“0.339”
Context: 1.00
LBX25-102Ishkōday Project · silverGrade: 0.25Grade Unit: g/tIntercept: 1 mView all detailsHide details
Identity
- Hole ID
- LBX25-102
- Project
- Ishkōday Project
- Commodity
- silver
- Region
- canada_on
- Reported Region
- Ontario, Canada
- Ticker
- LME
Geometry
- Grade
- 0.25
- Grade Unit
- g/t
- Intercept
- 1 m
- From
- 212 m
- To
- 213 m
- Hole Depth
- 300 m
Classification
- Deposit Type
- orogenic
- Program
- mixed
- Sample Type
- drill
- Group ID
- LBX25-102:212.00-213.00
Location
- Easting
- 446200
- Northing
- 5512713
- Elevation
- 323 m
- Azimuth
- 115 °
- Dip
- -50 °
- Loc. Confidence
- high
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- blanks, standards, duplicates, check_assays
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-11T00:00:00.000Z
Reasoning: Very low-grade silver intercept over a narrow width, with a very low GT product.
Negative factors
- Narrow intercept width
- Low grade-thickness (GT) product
- True width not disclosed
Evidence · table
“0.25”
Context: 1.00
LBX25-102Ishkōday Project · copperGrade Unit: %Intercept: 1 mView all detailsHide details
Identity
- Hole ID
- LBX25-102
- Project
- Ishkōday Project
- Commodity
- copper
- Region
- canada_on
- Reported Region
- Ontario, Canada
- Ticker
- LME
Geometry
- Grade Unit
- %
- Intercept
- 1 m
- From
- 212 m
- To
- 213 m
- Hole Depth
- 300 m
Classification
- Deposit Type
- orogenic
- Program
- mixed
- Sample Type
- drill
- Group ID
- LBX25-102:212.00-213.00
Location
- Easting
- 446200
- Northing
- 5512713
- Elevation
- 323 m
- Azimuth
- 115 °
- Dip
- -50 °
- Loc. Confidence
- high
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- blanks, standards, duplicates, check_assays
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-11T00:00:00.000Z
Reasoning: No copper grade reported for this narrow intercept.
Negative factors
- No grade reported
- True width not disclosed
Evidence · table
“-”
Context: 1.00
LBX25-102Ishkōday Project · zincGrade: 0.04Grade Unit: %Intercept: 1 mView all detailsHide details
Identity
- Hole ID
- LBX25-102
- Project
- Ishkōday Project
- Commodity
- zinc
- Region
- canada_on
- Reported Region
- Ontario, Canada
- Ticker
- LME
Geometry
- Grade
- 0.04
- Grade Unit
- %
- Intercept
- 1 m
- From
- 212 m
- To
- 213 m
- Hole Depth
- 300 m
Classification
- Deposit Type
- orogenic
- Program
- mixed
- Sample Type
- drill
- Group ID
- LBX25-102:212.00-213.00
Location
- Easting
- 446200
- Northing
- 5512713
- Elevation
- 323 m
- Azimuth
- 115 °
- Dip
- -50 °
- Loc. Confidence
- high
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- blanks, standards, duplicates, check_assays
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-11T00:00:00.000Z
Reasoning: Very low-grade zinc intercept over a narrow width, with a very low GT product.
Negative factors
- Narrow intercept width
- Low grade-thickness (GT) product
- True width not disclosed
Evidence · table
“0.04”
Context: 1.00
LBX25-102Ishkōday Project · goldGrade: 0.457Grade Unit: g/tIntercept: 0.5 mView all detailsHide details
Identity
- Hole ID
- LBX25-102
- Project
- Ishkōday Project
- Commodity
- gold
- Region
- canada_on
- Reported Region
- Ontario, Canada
- Ticker
- LME
Geometry
- Grade
- 0.457
- Grade Unit
- g/t
- Intercept
- 0.5 m
- From
- 222.8 m
- To
- 223.3 m
- Hole Depth
- 300 m
Classification
- Deposit Type
- orogenic
- Program
- mixed
- Sample Type
- drill
- Group ID
- LBX25-102:222.80-223.30
Location
- Easting
- 446200
- Northing
- 5512713
- Elevation
- 323 m
- Azimuth
- 115 °
- Dip
- -50 °
- Loc. Confidence
- high
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- blanks, standards, duplicates, check_assays
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-11T00:00:00.000Z
Reasoning: Low-grade gold sub-interval over a very narrow width, with a very low GT product.
Negative factors
- Very narrow intercept width
- Low grade-thickness (GT) product
- True width not disclosed
Evidence · table
“0.457”
Context: 0.50
LBX25-102Ishkōday Project · silverGrade: 20.6Grade Unit: g/tIntercept: 0.5 mView all detailsHide details
Identity
- Hole ID
- LBX25-102
- Project
- Ishkōday Project
- Commodity
- silver
- Region
- canada_on
- Reported Region
- Ontario, Canada
- Ticker
- LME
Geometry
- Grade
- 20.6
- Grade Unit
- g/t
- Intercept
- 0.5 m
- From
- 222.8 m
- To
- 223.3 m
- Hole Depth
- 300 m
Classification
- Deposit Type
- orogenic
- Program
- mixed
- Sample Type
- drill
- Group ID
- LBX25-102:222.80-223.30
Location
- Easting
- 446200
- Northing
- 5512713
- Elevation
- 323 m
- Azimuth
- 115 °
- Dip
- -50 °
- Loc. Confidence
- high
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- blanks, standards, duplicates, check_assays
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-11T00:00:00.000Z
Reasoning: Low-grade silver sub-interval over a very narrow width, with a very low GT product.
Negative factors
- Very narrow intercept width
- Low grade-thickness (GT) product
- True width not disclosed
Evidence · table
“20.60”
Context: 0.50
LBX25-102Ishkōday Project · copperGrade: 0.03Grade Unit: %Intercept: 0.5 mView all detailsHide details
Identity
- Hole ID
- LBX25-102
- Project
- Ishkōday Project
- Commodity
- copper
- Region
- canada_on
- Reported Region
- Ontario, Canada
- Ticker
- LME
Geometry
- Grade
- 0.03
- Grade Unit
- %
- Intercept
- 0.5 m
- From
- 222.8 m
- To
- 223.3 m
- Hole Depth
- 300 m
Classification
- Deposit Type
- orogenic
- Program
- mixed
- Sample Type
- drill
- Group ID
- LBX25-102:222.80-223.30
Location
- Easting
- 446200
- Northing
- 5512713
- Elevation
- 323 m
- Azimuth
- 115 °
- Dip
- -50 °
- Loc. Confidence
- high
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- blanks, standards, duplicates, check_assays
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-11T00:00:00.000Z
Reasoning: Low-grade copper sub-interval over a very narrow width, with a very low GT product.
Negative factors
- Very narrow intercept width
- Low grade-thickness (GT) product
- True width not disclosed
Evidence · table
“0.03”
Context: 0.50
LBX25-102Ishkōday Project · zincGrade: 2.55Grade Unit: %Intercept: 0.5 mView all detailsHide details
Identity
- Hole ID
- LBX25-102
- Project
- Ishkōday Project
- Commodity
- zinc
- Region
- canada_on
- Reported Region
- Ontario, Canada
- Ticker
- LME
Geometry
- Grade
- 2.55
- Grade Unit
- %
- Intercept
- 0.5 m
- From
- 222.8 m
- To
- 223.3 m
- Hole Depth
- 300 m
Classification
- Deposit Type
- orogenic
- Program
- mixed
- Sample Type
- drill
- Group ID
- LBX25-102:222.80-223.30
Location
- Easting
- 446200
- Northing
- 5512713
- Elevation
- 323 m
- Azimuth
- 115 °
- Dip
- -50 °
- Loc. Confidence
- high
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- blanks, standards, duplicates, check_assays
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-11T00:00:00.000Z
Reasoning: Weak zinc grade sub-interval over a very narrow width, with a very low GT product.
Positive factors
- Weak zinc grade
Negative factors
- Very narrow intercept width
- Low grade-thickness (GT) product
- True width not disclosed
Evidence · table
“2.55”
Context: 0.50
LBX25-102Ishkōday Project · goldGrade: 0.355Grade Unit: g/tIntercept: 19 mView all detailsHide details
Identity
- Hole ID
- LBX25-102
- Project
- Ishkōday Project
- Commodity
- gold
- Region
- canada_on
- Reported Region
- Ontario, Canada
- Ticker
- LME
Geometry
- Grade
- 0.355
- Grade Unit
- g/t
- Intercept
- 19 m
- From
- 226 m
- To
- 245 m
- Hole Depth
- 300 m
Classification
- Deposit Type
- orogenic
- Program
- mixed
- Sample Type
- drill
- Group ID
- LBX25-102:226.00-245.00
Location
- Easting
- 446200
- Northing
- 5512713
- Elevation
- 323 m
- Azimuth
- 115 °
- Dip
- -50 °
- Loc. Confidence
- high
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- blanks, standards, duplicates, check_assays
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-11T00:00:00.000Z
Reasoning: Wide intercept of low-grade gold, part of a broader polymetallic zone, but with a very low GT product.
Positive factors
- Wide intercept length
- Polymetallic mineralization
Negative factors
- Low grade-thickness (GT) product
- True width not disclosed
Evidence · table
“0.355”
Context: 19.00
LBX25-102Ishkōday Project · silverGrade: 2.63Grade Unit: g/tIntercept: 19 mView all detailsHide details
Identity
- Hole ID
- LBX25-102
- Project
- Ishkōday Project
- Commodity
- silver
- Region
- canada_on
- Reported Region
- Ontario, Canada
- Ticker
- LME
Geometry
- Grade
- 2.63
- Grade Unit
- g/t
- Intercept
- 19 m
- From
- 226 m
- To
- 245 m
- Hole Depth
- 300 m
Classification
- Deposit Type
- orogenic
- Program
- mixed
- Sample Type
- drill
- Group ID
- LBX25-102:226.00-245.00
Location
- Easting
- 446200
- Northing
- 5512713
- Elevation
- 323 m
- Azimuth
- 115 °
- Dip
- -50 °
- Loc. Confidence
- high
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- blanks, standards, duplicates, check_assays
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-11T00:00:00.000Z
Reasoning: Wide intercept of low-grade silver, part of a broader polymetallic zone, but with a very low GT product.
Positive factors
- Wide intercept length
- Polymetallic mineralization
Negative factors
- Low grade-thickness (GT) product
- True width not disclosed
Evidence · table
“2.63”
Context: 19.00
LBX25-102Ishkōday Project · copperGrade: 0.03Grade Unit: %Intercept: 19 mView all detailsHide details
Identity
- Hole ID
- LBX25-102
- Project
- Ishkōday Project
- Commodity
- copper
- Region
- canada_on
- Reported Region
- Ontario, Canada
- Ticker
- LME
Geometry
- Grade
- 0.03
- Grade Unit
- %
- Intercept
- 19 m
- From
- 226 m
- To
- 245 m
- Hole Depth
- 300 m
Classification
- Deposit Type
- orogenic
- Program
- mixed
- Sample Type
- drill
- Group ID
- LBX25-102:226.00-245.00
Location
- Easting
- 446200
- Northing
- 5512713
- Elevation
- 323 m
- Azimuth
- 115 °
- Dip
- -50 °
- Loc. Confidence
- high
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- blanks, standards, duplicates, check_assays
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-11T00:00:00.000Z
Reasoning: Wide intercept of low-grade copper, part of a broader polymetallic zone, but with a very low GT product.
Positive factors
- Wide intercept length
- Polymetallic mineralization
Negative factors
- Low grade-thickness (GT) product
- True width not disclosed
Evidence · table
“0.03”
Context: 19.00
LBX25-102Ishkōday Project · zincGrade: 0.58Grade Unit: %Intercept: 19 mView all detailsHide details
Identity
- Hole ID
- LBX25-102
- Project
- Ishkōday Project
- Commodity
- zinc
- Region
- canada_on
- Reported Region
- Ontario, Canada
- Ticker
- LME
Geometry
- Grade
- 0.58
- Grade Unit
- %
- Intercept
- 19 m
- From
- 226 m
- To
- 245 m
- Hole Depth
- 300 m
Classification
- Deposit Type
- orogenic
- Program
- mixed
- Sample Type
- drill
- Group ID
- LBX25-102:226.00-245.00
Location
- Easting
- 446200
- Northing
- 5512713
- Elevation
- 323 m
- Azimuth
- 115 °
- Dip
- -50 °
- Loc. Confidence
- high
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- blanks, standards, duplicates, check_assays
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-11T00:00:00.000Z
Reasoning: Wide intercept of low-grade zinc, part of a broader polymetallic zone, but with a very low GT product.
Positive factors
- Wide intercept length
- Polymetallic mineralization
Negative factors
- Low grade-thickness (GT) product
- True width not disclosed
Evidence · table
“0.58”
Context: 19.00
LBX25-102Ishkōday Project · goldGrade: 1.114Grade Unit: g/tIntercept: 3.3 mView all detailsHide details
Identity
- Hole ID
- LBX25-102
- Project
- Ishkōday Project
- Commodity
- gold
- Region
- canada_on
- Reported Region
- Ontario, Canada
- Ticker
- LME
Geometry
- Grade
- 1.114
- Grade Unit
- g/t
- Intercept
- 3.3 m
- From
- 230.3 m
- To
- 233.6 m
- Hole Depth
- 300 m
Classification
- Deposit Type
- orogenic
- Program
- mixed
- Sample Type
- drill
- Group ID
- LBX25-102:230.30-233.60
Location
- Easting
- 446200
- Northing
- 5512713
- Elevation
- 323 m
- Azimuth
- 115 °
- Dip
- -50 °
- Loc. Confidence
- high
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- blanks, standards, duplicates, check_assays
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-11T00:00:00.000Z
Reasoning: Moderate gold grade sub-interval over a narrow width, part of a polymetallic zone, but with a very low GT product.
Positive factors
- Moderate gold grade
- Polymetallic mineralization
Negative factors
- Low grade-thickness (GT) product
- True width not disclosed
Evidence · table
“1.114”
Context: 3.30
LBX25-102Ishkōday Project · silverGrade: 6.35Grade Unit: g/tIntercept: 3.3 mView all detailsHide details
Identity
- Hole ID
- LBX25-102
- Project
- Ishkōday Project
- Commodity
- silver
- Region
- canada_on
- Reported Region
- Ontario, Canada
- Ticker
- LME
Geometry
- Grade
- 6.35
- Grade Unit
- g/t
- Intercept
- 3.3 m
- From
- 230.3 m
- To
- 233.6 m
- Hole Depth
- 300 m
Classification
- Deposit Type
- orogenic
- Program
- mixed
- Sample Type
- drill
- Group ID
- LBX25-102:230.30-233.60
Location
- Easting
- 446200
- Northing
- 5512713
- Elevation
- 323 m
- Azimuth
- 115 °
- Dip
- -50 °
- Loc. Confidence
- high
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- blanks, standards, duplicates, check_assays
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-11T00:00:00.000Z
Reasoning: Low-grade silver sub-interval over a narrow width, part of a polymetallic zone, but with a very low GT product.
Positive factors
- Polymetallic mineralization
Negative factors
- Low grade-thickness (GT) product
- True width not disclosed
Evidence · table
“6.35”
Context: 3.30
LBX25-102Ishkōday Project · copperGrade: 0.07Grade Unit: %Intercept: 3.3 mView all detailsHide details
Identity
- Hole ID
- LBX25-102
- Project
- Ishkōday Project
- Commodity
- copper
- Region
- canada_on
- Reported Region
- Ontario, Canada
- Ticker
- LME
Geometry
- Grade
- 0.07
- Grade Unit
- %
- Intercept
- 3.3 m
- From
- 230.3 m
- To
- 233.6 m
- Hole Depth
- 300 m
Classification
- Deposit Type
- orogenic
- Program
- mixed
- Sample Type
- drill
- Group ID
- LBX25-102:230.30-233.60
Location
- Easting
- 446200
- Northing
- 5512713
- Elevation
- 323 m
- Azimuth
- 115 °
- Dip
- -50 °
- Loc. Confidence
- high
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- blanks, standards, duplicates, check_assays
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-11T00:00:00.000Z
Reasoning: Low-grade copper sub-interval over a narrow width, part of a polymetallic zone, but with a very low GT product.
Positive factors
- Polymetallic mineralization
Negative factors
- Low grade-thickness (GT) product
- True width not disclosed
Evidence · table
“0.07”
Context: 3.30
LBX25-102Ishkōday Project · zincGrade: 1.78Grade Unit: %Intercept: 3.3 mView all detailsHide details
Identity
- Hole ID
- LBX25-102
- Project
- Ishkōday Project
- Commodity
- zinc
- Region
- canada_on
- Reported Region
- Ontario, Canada
- Ticker
- LME
Geometry
- Grade
- 1.78
- Grade Unit
- %
- Intercept
- 3.3 m
- From
- 230.3 m
- To
- 233.6 m
- Hole Depth
- 300 m
Classification
- Deposit Type
- orogenic
- Program
- mixed
- Sample Type
- drill
- Group ID
- LBX25-102:230.30-233.60
Location
- Easting
- 446200
- Northing
- 5512713
- Elevation
- 323 m
- Azimuth
- 115 °
- Dip
- -50 °
- Loc. Confidence
- high
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- blanks, standards, duplicates, check_assays
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-11T00:00:00.000Z
Reasoning: Low-grade zinc sub-interval over a narrow width, part of a polymetallic zone, but with a very low GT product.
Positive factors
- Polymetallic mineralization
Negative factors
- Low grade-thickness (GT) product
- True width not disclosed
Evidence · table
“1.78”
Context: 3.30
LBX25-102Ishkōday Project · goldGrade: 2.6Grade Unit: g/tIntercept: 0.5 mView all detailsHide details
Identity
- Hole ID
- LBX25-102
- Project
- Ishkōday Project
- Commodity
- gold
- Region
- canada_on
- Reported Region
- Ontario, Canada
- Ticker
- LME
Geometry
- Grade
- 2.6
- Grade Unit
- g/t
- Intercept
- 0.5 m
- From
- 230.3 m
- To
- 230.8 m
- Hole Depth
- 300 m
Classification
- Deposit Type
- orogenic
- Program
- mixed
- Sample Type
- drill
- Group ID
- LBX25-102:230.30-230.80
Location
- Easting
- 446200
- Northing
- 5512713
- Elevation
- 323 m
- Azimuth
- 115 °
- Dip
- -50 °
- Loc. Confidence
- high
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- blanks, standards, duplicates, check_assays
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-11T00:00:00.000Z
Reasoning: Weak gold grade sub-interval over a very narrow width, part of a polymetallic zone, but with a very low GT product.
Positive factors
- Weak gold grade
- Polymetallic mineralization
Negative factors
- Very narrow intercept width
- Low grade-thickness (GT) product
- True width not disclosed
Evidence · table
“2.600”
Context: 0.50
LBX25-102Ishkōday Project · silverGrade: 13.6Grade Unit: g/tIntercept: 0.5 mView all detailsHide details
Identity
- Hole ID
- LBX25-102
- Project
- Ishkōday Project
- Commodity
- silver
- Region
- canada_on
- Reported Region
- Ontario, Canada
- Ticker
- LME
Geometry
- Grade
- 13.6
- Grade Unit
- g/t
- Intercept
- 0.5 m
- From
- 230.3 m
- To
- 230.8 m
- Hole Depth
- 300 m
Classification
- Deposit Type
- orogenic
- Program
- mixed
- Sample Type
- drill
- Group ID
- LBX25-102:230.30-230.80
Location
- Easting
- 446200
- Northing
- 5512713
- Elevation
- 323 m
- Azimuth
- 115 °
- Dip
- -50 °
- Loc. Confidence
- high
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- blanks, standards, duplicates, check_assays
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-11T00:00:00.000Z
Reasoning: Low-grade silver sub-interval over a very narrow width, part of a polymetallic zone, but with a very low GT product.
Positive factors
- Polymetallic mineralization
Negative factors
- Very narrow intercept width
- Low grade-thickness (GT) product
- True width not disclosed
Evidence · table
“13.60”
Context: 0.50
LBX25-102Ishkōday Project · copperGrade: 0.1Grade Unit: %Intercept: 0.5 mView all detailsHide details
Identity
- Hole ID
- LBX25-102
- Project
- Ishkōday Project
- Commodity
- copper
- Region
- canada_on
- Reported Region
- Ontario, Canada
- Ticker
- LME
Geometry
- Grade
- 0.1
- Grade Unit
- %
- Intercept
- 0.5 m
- From
- 230.3 m
- To
- 230.8 m
- Hole Depth
- 300 m
Classification
- Deposit Type
- orogenic
- Program
- mixed
- Sample Type
- drill
- Group ID
- LBX25-102:230.30-230.80
Location
- Easting
- 446200
- Northing
- 5512713
- Elevation
- 323 m
- Azimuth
- 115 °
- Dip
- -50 °
- Loc. Confidence
- high
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- blanks, standards, duplicates, check_assays
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-11T00:00:00.000Z
Reasoning: Low-grade copper sub-interval over a very narrow width, part of a polymetallic zone, but with a very low GT product.
Positive factors
- Polymetallic mineralization
Negative factors
- Very narrow intercept width
- Low grade-thickness (GT) product
- True width not disclosed
Evidence · table
“0.10”
Context: 0.50
LBX25-102Ishkōday Project · zincGrade: 6.75Grade Unit: %Intercept: 0.5 mView all detailsHide details
Identity
- Hole ID
- LBX25-102
- Project
- Ishkōday Project
- Commodity
- zinc
- Region
- canada_on
- Reported Region
- Ontario, Canada
- Ticker
- LME
Geometry
- Grade
- 6.75
- Grade Unit
- %
- Intercept
- 0.5 m
- From
- 230.3 m
- To
- 230.8 m
- Hole Depth
- 300 m
Classification
- Deposit Type
- orogenic
- Program
- mixed
- Sample Type
- drill
- Group ID
- LBX25-102:230.30-230.80
Location
- Easting
- 446200
- Northing
- 5512713
- Elevation
- 323 m
- Azimuth
- 115 °
- Dip
- -50 °
- Loc. Confidence
- high
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- blanks, standards, duplicates, check_assays
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-11T00:00:00.000Z
Reasoning: Moderate zinc grade sub-interval over a very narrow width, part of a polymetallic zone, but with a very low GT product.
Positive factors
- Moderate zinc grade
- Polymetallic mineralization
Negative factors
- Very narrow intercept width
- Low grade-thickness (GT) product
- True width not disclosed
Evidence · table
“6.75”
Context: 0.50
includingIshkōday Project · goldGrade: 0.146Grade Unit: g/tIntercept: 0.7 mView all detailsHide details
Identity
- Hole ID
- including
- Project
- Ishkōday Project
- Commodity
- gold
- Region
- canada_on
- Reported Region
- Ontario, Canada
- Ticker
- LME
Geometry
- Grade
- 0.146
- Grade Unit
- g/t
- Intercept
- 0.7 m
- From
- 7.9 m
- To
- 8.6 m
Classification
- Deposit Type
- orogenic
- Sample Type
- drill
- Group ID
- including:7.9-8.6
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-11T00:00:00.000Z
Reasoning: Expanded from assay table. 0.146 g/t gold is below against the default band [5, 2, 1, 0.3] g/t. Grade×width 0.1 g/t·m is below.
Negative factors
- 0.146 g/t gold is below the weak threshold (0.3 g/t) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.146”
Context: including
includingIshkōday Project · silverGrade: 9.8Grade Unit: g/tIntercept: 0.7 mView all detailsHide details
Identity
- Hole ID
- including
- Project
- Ishkōday Project
- Commodity
- silver
- Region
- canada_on
- Reported Region
- Ontario, Canada
- Ticker
- LME
Geometry
- Grade
- 9.8
- Grade Unit
- g/t
- Intercept
- 0.7 m
- From
- 7.9 m
- To
- 8.6 m
Classification
- Deposit Type
- orogenic
- Sample Type
- drill
- Group ID
- including:7.9-8.6
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-11T00:00:00.000Z
Reasoning: Expanded from assay table. 9.8 g/t silver is below against the default band [500, 200, 100, 30] g/t. Grade×width 6.9 g/t·m is below.
Negative factors
- 9.8 g/t silver is below the weak threshold (30 g/t) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“9.80”
Context: including
includingIshkōday Project · copperGrade: 0.06Grade Unit: %Intercept: 0.7 mView all detailsHide details
Identity
- Hole ID
- including
- Project
- Ishkōday Project
- Commodity
- copper
- Region
- canada_on
- Reported Region
- Ontario, Canada
- Ticker
- LME
Geometry
- Grade
- 0.06
- Grade Unit
- %
- Intercept
- 0.7 m
- From
- 7.9 m
- To
- 8.6 m
Classification
- Deposit Type
- orogenic
- Sample Type
- drill
- Group ID
- including:7.9-8.6
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-11T00:00:00.000Z
Reasoning: Expanded from assay table. 0.06 % copper is below against the default band [2.5, 1, 0.5, 0.25] %. Grade×width 0.0 %·m is below.
Negative factors
- 0.06 % copper is below the weak threshold (0.25 %) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.06”
Context: including
includingIshkōday Project · zincGrade: 2.94Grade Unit: %Intercept: 0.7 mView all detailsHide details
Identity
- Hole ID
- including
- Project
- Ishkōday Project
- Commodity
- zinc
- Region
- canada_on
- Reported Region
- Ontario, Canada
- Ticker
- LME
Geometry
- Grade
- 2.94
- Grade Unit
- %
- Intercept
- 0.7 m
- From
- 7.9 m
- To
- 8.6 m
Classification
- Deposit Type
- orogenic
- Sample Type
- drill
- Group ID
- including:7.9-8.6
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-11T00:00:00.000Z
Reasoning: Expanded from assay table. 2.94 % zinc is weak against the default band [18, 10, 5, 2] %. Grade×width 2.1 %·m is below (grade alone is weak; the better of the two is used).
Negative factors
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“2.94”
Context: including
includingIshkōday Project · goldGrade: 0.883Grade Unit: g/tIntercept: 1.5 mView all detailsHide details
Identity
- Hole ID
- including
- Project
- Ishkōday Project
- Commodity
- gold
- Region
- canada_on
- Reported Region
- Ontario, Canada
- Ticker
- LME
Geometry
- Grade
- 0.883
- Grade Unit
- g/t
- Intercept
- 1.5 m
- From
- 159.2 m
- To
- 160.7 m
Classification
- Deposit Type
- orogenic
- Sample Type
- drill
- Group ID
- including:159.2-160.7
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-11T00:00:00.000Z
Reasoning: Expanded from assay table. 0.883 g/t gold is weak against the default band [5, 2, 1, 0.3] g/t. Grade×width 1.3 g/t·m is below (grade alone is weak; the better of the two is used).
Negative factors
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.883”
Context: including
includingIshkōday Project · silverGrade: 13.6Grade Unit: g/tIntercept: 1.5 mView all detailsHide details
Identity
- Hole ID
- including
- Project
- Ishkōday Project
- Commodity
- silver
- Region
- canada_on
- Reported Region
- Ontario, Canada
- Ticker
- LME
Geometry
- Grade
- 13.6
- Grade Unit
- g/t
- Intercept
- 1.5 m
- From
- 159.2 m
- To
- 160.7 m
Classification
- Deposit Type
- orogenic
- Sample Type
- drill
- Group ID
- including:159.2-160.7
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-11T00:00:00.000Z
Reasoning: Expanded from assay table. 13.6 g/t silver is below against the default band [500, 200, 100, 30] g/t. Grade×width 20.4 g/t·m is below.
Negative factors
- 13.6 g/t silver is below the weak threshold (30 g/t) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“13.60”
Context: including
includingIshkōday Project · copperGrade: 0.24Grade Unit: %Intercept: 1.5 mView all detailsHide details
Identity
- Hole ID
- including
- Project
- Ishkōday Project
- Commodity
- copper
- Region
- canada_on
- Reported Region
- Ontario, Canada
- Ticker
- LME
Geometry
- Grade
- 0.24
- Grade Unit
- %
- Intercept
- 1.5 m
- From
- 159.2 m
- To
- 160.7 m
Classification
- Deposit Type
- orogenic
- Sample Type
- drill
- Group ID
- including:159.2-160.7
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-11T00:00:00.000Z
Reasoning: Expanded from assay table. 0.24 % copper is below against the default band [2.5, 1, 0.5, 0.25] %. Grade×width 0.4 %·m is below.
Negative factors
- 0.24 % copper is below the weak threshold (0.25 %) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.24”
Context: including
includingIshkōday Project · zincGrade: 5.61Grade Unit: %Intercept: 1.5 mView all detailsHide details
Identity
- Hole ID
- including
- Project
- Ishkōday Project
- Commodity
- zinc
- Region
- canada_on
- Reported Region
- Ontario, Canada
- Ticker
- LME
Geometry
- Grade
- 5.61
- Grade Unit
- %
- Intercept
- 1.5 m
- From
- 159.2 m
- To
- 160.7 m
Classification
- Deposit Type
- orogenic
- Sample Type
- drill
- Group ID
- including:159.2-160.7
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-11T00:00:00.000Z
Reasoning: Expanded from assay table. 5.61 % zinc is moderate against the default band [18, 10, 5, 2] %. Grade×width 8.4 %·m is below (grade alone is moderate; the better of the two is used).
Negative factors
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“5.61”
Context: including
includingIshkōday Project · goldGrade: 2.06Grade Unit: g/tIntercept: 0.5 mView all detailsHide details
Identity
- Hole ID
- including
- Project
- Ishkōday Project
- Commodity
- gold
- Region
- canada_on
- Reported Region
- Ontario, Canada
- Ticker
- LME
Geometry
- Grade
- 2.06
- Grade Unit
- g/t
- Intercept
- 0.5 m
- From
- 159.7 m
- To
- 160.2 m
Classification
- Deposit Type
- orogenic
- Sample Type
- drill
- Group ID
- including:159.7-160.2
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-11T00:00:00.000Z
Reasoning: Expanded from assay table. 2.06 g/t gold is strong against the default band [5, 2, 1, 0.3] g/t. Grade×width 1.0 g/t·m is below (grade alone is strong; the better of the two is used).
Positive factors
- 2.06 g/t gold is strong on the default band.
Negative factors
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“2.060”
Context: including
includingIshkōday Project · silverGrade: 31.1Grade Unit: g/tIntercept: 0.5 mView all detailsHide details
Identity
- Hole ID
- including
- Project
- Ishkōday Project
- Commodity
- silver
- Region
- canada_on
- Reported Region
- Ontario, Canada
- Ticker
- LME
Geometry
- Grade
- 31.1
- Grade Unit
- g/t
- Intercept
- 0.5 m
- From
- 159.7 m
- To
- 160.2 m
Classification
- Deposit Type
- orogenic
- Sample Type
- drill
- Group ID
- including:159.7-160.2
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-11T00:00:00.000Z
Reasoning: Expanded from assay table. 31.1 g/t silver is weak against the default band [500, 200, 100, 30] g/t. Grade×width 15.6 g/t·m is below (grade alone is weak; the better of the two is used).
Negative factors
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“31.10”
Context: including
includingIshkōday Project · copperGrade: 0.53Grade Unit: %Intercept: 0.5 mView all detailsHide details
Identity
- Hole ID
- including
- Project
- Ishkōday Project
- Commodity
- copper
- Region
- canada_on
- Reported Region
- Ontario, Canada
- Ticker
- LME
Geometry
- Grade
- 0.53
- Grade Unit
- %
- Intercept
- 0.5 m
- From
- 159.7 m
- To
- 160.2 m
Classification
- Deposit Type
- orogenic
- Sample Type
- drill
- Group ID
- including:159.7-160.2
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-11T00:00:00.000Z
Reasoning: Expanded from assay table. 0.53 % copper is moderate against the default band [2.5, 1, 0.5, 0.25] %. Grade×width 0.3 %·m is below (grade alone is moderate; the better of the two is used).
Negative factors
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.53”
Context: including
includingIshkōday Project · zincGrade: 12.35Grade Unit: %Intercept: 0.5 mView all detailsHide details
Identity
- Hole ID
- including
- Project
- Ishkōday Project
- Commodity
- zinc
- Region
- canada_on
- Reported Region
- Ontario, Canada
- Ticker
- LME
Geometry
- Grade
- 12.35
- Grade Unit
- %
- Intercept
- 0.5 m
- From
- 159.7 m
- To
- 160.2 m
Classification
- Deposit Type
- orogenic
- Sample Type
- drill
- Group ID
- including:159.7-160.2
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-11T00:00:00.000Z
Reasoning: Expanded from assay table. 12.35 % zinc is strong against the default band [18, 10, 5, 2] %. Grade×width 6.2 %·m is below (grade alone is strong; the better of the two is used).
Positive factors
- 12.35 % zinc is strong on the default band.
Negative factors
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“12.35”
Context: including
includingIshkōday Project · goldGrade: 1.159Grade Unit: g/tIntercept: 1.6 mView all detailsHide details
Identity
- Hole ID
- including
- Project
- Ishkōday Project
- Commodity
- gold
- Region
- canada_on
- Reported Region
- Ontario, Canada
- Ticker
- LME
Geometry
- Grade
- 1.159
- Grade Unit
- g/t
- Intercept
- 1.6 m
- From
- 187.7 m
- To
- 189.3 m
Classification
- Deposit Type
- orogenic
- Sample Type
- drill
- Group ID
- including:187.7-189.3
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-11T00:00:00.000Z
Reasoning: Expanded from assay table. 1.159 g/t gold is moderate against the default band [5, 2, 1, 0.3] g/t. Grade×width 1.9 g/t·m is below (grade alone is moderate; the better of the two is used).
Negative factors
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“1.159”
Context: including
includingIshkōday Project · silverGrade: 10.21Grade Unit: g/tIntercept: 1.6 mView all detailsHide details
Identity
- Hole ID
- including
- Project
- Ishkōday Project
- Commodity
- silver
- Region
- canada_on
- Reported Region
- Ontario, Canada
- Ticker
- LME
Geometry
- Grade
- 10.21
- Grade Unit
- g/t
- Intercept
- 1.6 m
- From
- 187.7 m
- To
- 189.3 m
Classification
- Deposit Type
- orogenic
- Sample Type
- drill
- Group ID
- including:187.7-189.3
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-11T00:00:00.000Z
Reasoning: Expanded from assay table. 10.21 g/t silver is below against the default band [500, 200, 100, 30] g/t. Grade×width 16.3 g/t·m is below.
Negative factors
- 10.21 g/t silver is below the weak threshold (30 g/t) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“10.21”
Context: including
includingIshkōday Project · copperGrade: 0.3Grade Unit: %Intercept: 1.6 mView all detailsHide details
Identity
- Hole ID
- including
- Project
- Ishkōday Project
- Commodity
- copper
- Region
- canada_on
- Reported Region
- Ontario, Canada
- Ticker
- LME
Geometry
- Grade
- 0.3
- Grade Unit
- %
- Intercept
- 1.6 m
- From
- 187.7 m
- To
- 189.3 m
Classification
- Deposit Type
- orogenic
- Sample Type
- drill
- Group ID
- including:187.7-189.3
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-11T00:00:00.000Z
Reasoning: Expanded from assay table. 0.3 % copper is weak against the default band [2.5, 1, 0.5, 0.25] %. Grade×width 0.5 %·m is below (grade alone is weak; the better of the two is used).
Negative factors
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.30”
Context: including
includingIshkōday Project · zincGrade: 4.39Grade Unit: %Intercept: 1.6 mView all detailsHide details
Identity
- Hole ID
- including
- Project
- Ishkōday Project
- Commodity
- zinc
- Region
- canada_on
- Reported Region
- Ontario, Canada
- Ticker
- LME
Geometry
- Grade
- 4.39
- Grade Unit
- %
- Intercept
- 1.6 m
- From
- 187.7 m
- To
- 189.3 m
Classification
- Deposit Type
- orogenic
- Sample Type
- drill
- Group ID
- including:187.7-189.3
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-11T00:00:00.000Z
Reasoning: Expanded from assay table. 4.39 % zinc is weak against the default band [18, 10, 5, 2] %. Grade×width 7.0 %·m is below (grade alone is weak; the better of the two is used).
Negative factors
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“4.39”
Context: including
includingIshkōday Project · goldGrade: 0.872Grade Unit: g/tIntercept: 5.3 mView all detailsHide details
Identity
- Hole ID
- including
- Project
- Ishkōday Project
- Commodity
- gold
- Region
- canada_on
- Reported Region
- Ontario, Canada
- Ticker
- LME
Geometry
- Grade
- 0.872
- Grade Unit
- g/t
- Intercept
- 5.3 m
- From
- 188.2 m
- To
- 193.5 m
Classification
- Deposit Type
- orogenic
- Sample Type
- drill
- Group ID
- including:188.2-193.5
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-11T00:00:00.000Z
Reasoning: Expanded from assay table. 0.872 g/t gold is weak against the default band [5, 2, 1, 0.3] g/t. Grade×width 4.6 g/t·m is below (grade alone is weak; the better of the two is used).
Negative factors
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.872”
Context: including
includingIshkōday Project · silverGrade: 5.11Grade Unit: g/tIntercept: 5.3 mView all detailsHide details
Identity
- Hole ID
- including
- Project
- Ishkōday Project
- Commodity
- silver
- Region
- canada_on
- Reported Region
- Ontario, Canada
- Ticker
- LME
Geometry
- Grade
- 5.11
- Grade Unit
- g/t
- Intercept
- 5.3 m
- From
- 188.2 m
- To
- 193.5 m
Classification
- Deposit Type
- orogenic
- Sample Type
- drill
- Group ID
- including:188.2-193.5
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-11T00:00:00.000Z
Reasoning: Expanded from assay table. 5.11 g/t silver is below against the default band [500, 200, 100, 30] g/t. Grade×width 27.1 g/t·m is below.
Negative factors
- 5.11 g/t silver is below the weak threshold (30 g/t) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“5.11”
Context: including
includingIshkōday Project · copperGrade: 0.16Grade Unit: %Intercept: 5.3 mView all detailsHide details
Identity
- Hole ID
- including
- Project
- Ishkōday Project
- Commodity
- copper
- Region
- canada_on
- Reported Region
- Ontario, Canada
- Ticker
- LME
Geometry
- Grade
- 0.16
- Grade Unit
- %
- Intercept
- 5.3 m
- From
- 188.2 m
- To
- 193.5 m
Classification
- Deposit Type
- orogenic
- Sample Type
- drill
- Group ID
- including:188.2-193.5
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-11T00:00:00.000Z
Reasoning: Expanded from assay table. 0.16 % copper is below against the default band [2.5, 1, 0.5, 0.25] %. Grade×width 0.8 %·m is below.
Negative factors
- 0.16 % copper is below the weak threshold (0.25 %) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.16”
Context: including
includingIshkōday Project · zincGrade: 2.53Grade Unit: %Intercept: 5.3 mView all detailsHide details
Identity
- Hole ID
- including
- Project
- Ishkōday Project
- Commodity
- zinc
- Region
- canada_on
- Reported Region
- Ontario, Canada
- Ticker
- LME
Geometry
- Grade
- 2.53
- Grade Unit
- %
- Intercept
- 5.3 m
- From
- 188.2 m
- To
- 193.5 m
Classification
- Deposit Type
- orogenic
- Sample Type
- drill
- Group ID
- including:188.2-193.5
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-11T00:00:00.000Z
Reasoning: Expanded from assay table. 2.53 % zinc is weak against the default band [18, 10, 5, 2] %. Grade×width 13.4 %·m is below (grade alone is weak; the better of the two is used).
Negative factors
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“2.53”
Context: including
includingIshkōday Project · goldGrade: 0.971Grade Unit: g/tIntercept: 3 mView all detailsHide details
Identity
- Hole ID
- including
- Project
- Ishkōday Project
- Commodity
- gold
- Region
- canada_on
- Reported Region
- Ontario, Canada
- Ticker
- LME
Geometry
- Grade
- 0.971
- Grade Unit
- g/t
- Intercept
- 3 m
- From
- 190.5 m
- To
- 193.5 m
Classification
- Deposit Type
- orogenic
- Sample Type
- drill
- Group ID
- including:190.5-193.5
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-11T00:00:00.000Z
Reasoning: Expanded from assay table. 0.971 g/t gold is weak against the default band [5, 2, 1, 0.3] g/t. Grade×width 2.9 g/t·m is below (grade alone is weak; the better of the two is used).
Negative factors
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.971”
Context: including
includingIshkōday Project · silverGrade: 4.04Grade Unit: g/tIntercept: 3 mView all detailsHide details
Identity
- Hole ID
- including
- Project
- Ishkōday Project
- Commodity
- silver
- Region
- canada_on
- Reported Region
- Ontario, Canada
- Ticker
- LME
Geometry
- Grade
- 4.04
- Grade Unit
- g/t
- Intercept
- 3 m
- From
- 190.5 m
- To
- 193.5 m
Classification
- Deposit Type
- orogenic
- Sample Type
- drill
- Group ID
- including:190.5-193.5
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-11T00:00:00.000Z
Reasoning: Expanded from assay table. 4.04 g/t silver is below against the default band [500, 200, 100, 30] g/t. Grade×width 12.1 g/t·m is below.
Negative factors
- 4.04 g/t silver is below the weak threshold (30 g/t) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“4.04”
Context: including
includingIshkōday Project · copperGrade: 0.14Grade Unit: %Intercept: 3 mView all detailsHide details
Identity
- Hole ID
- including
- Project
- Ishkōday Project
- Commodity
- copper
- Region
- canada_on
- Reported Region
- Ontario, Canada
- Ticker
- LME
Geometry
- Grade
- 0.14
- Grade Unit
- %
- Intercept
- 3 m
- From
- 190.5 m
- To
- 193.5 m
Classification
- Deposit Type
- orogenic
- Sample Type
- drill
- Group ID
- including:190.5-193.5
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-11T00:00:00.000Z
Reasoning: Expanded from assay table. 0.14 % copper is below against the default band [2.5, 1, 0.5, 0.25] %. Grade×width 0.4 %·m is below.
Negative factors
- 0.14 % copper is below the weak threshold (0.25 %) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.14”
Context: including
includingIshkōday Project · zincGrade: 2.21Grade Unit: %Intercept: 3 mView all detailsHide details
Identity
- Hole ID
- including
- Project
- Ishkōday Project
- Commodity
- zinc
- Region
- canada_on
- Reported Region
- Ontario, Canada
- Ticker
- LME
Geometry
- Grade
- 2.21
- Grade Unit
- %
- Intercept
- 3 m
- From
- 190.5 m
- To
- 193.5 m
Classification
- Deposit Type
- orogenic
- Sample Type
- drill
- Group ID
- including:190.5-193.5
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-11T00:00:00.000Z
Reasoning: Expanded from assay table. 2.21 % zinc is weak against the default band [18, 10, 5, 2] %. Grade×width 6.6 %·m is below (grade alone is weak; the better of the two is used).
Negative factors
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“2.21”
Context: including
IncludingIshkōday Project · goldGrade: 5.14Grade Unit: g/tIntercept: 1 mView all detailsHide details
Identity
- Hole ID
- Including
- Project
- Ishkōday Project
- Commodity
- gold
- Region
- canada_on
- Reported Region
- Ontario, Canada
- Ticker
- LME
Geometry
- Grade
- 5.14
- Grade Unit
- g/t
- Intercept
- 1 m
- From
- 207 m
- To
- 208 m
Classification
- Deposit Type
- orogenic
- Sample Type
- drill
- Group ID
- Including:207-208
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-11T00:00:00.000Z
Reasoning: Expanded from assay table. 5.14 g/t gold is exceptional against the default band [5, 2, 1, 0.3] g/t. Grade×width 5.1 g/t·m is below (grade alone is exceptional; the better of the two is used).
Positive factors
- 5.14 g/t gold is exceptional on the default band.
Negative factors
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“5.140”
Context: Including
IncludingIshkōday Project · silverGrade: 4.6Grade Unit: g/tIntercept: 1 mView all detailsHide details
Identity
- Hole ID
- Including
- Project
- Ishkōday Project
- Commodity
- silver
- Region
- canada_on
- Reported Region
- Ontario, Canada
- Ticker
- LME
Geometry
- Grade
- 4.6
- Grade Unit
- g/t
- Intercept
- 1 m
- From
- 207 m
- To
- 208 m
Classification
- Deposit Type
- orogenic
- Sample Type
- drill
- Group ID
- Including:207-208
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-11T00:00:00.000Z
Reasoning: Expanded from assay table. 4.6 g/t silver is below against the default band [500, 200, 100, 30] g/t. Grade×width 4.6 g/t·m is below.
Negative factors
- 4.6 g/t silver is below the weak threshold (30 g/t) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“4.60”
Context: Including
IncludingIshkōday Project · copperGrade: 0.04Grade Unit: %Intercept: 1 mView all detailsHide details
Identity
- Hole ID
- Including
- Project
- Ishkōday Project
- Commodity
- copper
- Region
- canada_on
- Reported Region
- Ontario, Canada
- Ticker
- LME
Geometry
- Grade
- 0.04
- Grade Unit
- %
- Intercept
- 1 m
- From
- 207 m
- To
- 208 m
Classification
- Deposit Type
- orogenic
- Sample Type
- drill
- Group ID
- Including:207-208
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-11T00:00:00.000Z
Reasoning: Expanded from assay table. 0.04 % copper is below against the default band [2.5, 1, 0.5, 0.25] %. Grade×width 0.0 %·m is below.
Negative factors
- 0.04 % copper is below the weak threshold (0.25 %) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.04”
Context: Including
IncludingIshkōday Project · zincGrade: 0.3Grade Unit: %Intercept: 1 mView all detailsHide details
Identity
- Hole ID
- Including
- Project
- Ishkōday Project
- Commodity
- zinc
- Region
- canada_on
- Reported Region
- Ontario, Canada
- Ticker
- LME
Geometry
- Grade
- 0.3
- Grade Unit
- %
- Intercept
- 1 m
- From
- 207 m
- To
- 208 m
Classification
- Deposit Type
- orogenic
- Sample Type
- drill
- Group ID
- Including:207-208
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-11T00:00:00.000Z
Reasoning: Expanded from assay table. 0.3 % zinc is below against the default band [18, 10, 5, 2] %. Grade×width 0.3 %·m is below.
Negative factors
- 0.3 % zinc is below the weak threshold (2 %) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.30”
Context: Including
includingIshkōday Project · goldGrade: 0.457Grade Unit: g/tIntercept: 0.5 mView all detailsHide details
Identity
- Hole ID
- including
- Project
- Ishkōday Project
- Commodity
- gold
- Region
- canada_on
- Reported Region
- Ontario, Canada
- Ticker
- LME
Geometry
- Grade
- 0.457
- Grade Unit
- g/t
- Intercept
- 0.5 m
- From
- 222.8 m
- To
- 223.3 m
Classification
- Deposit Type
- orogenic
- Sample Type
- drill
- Group ID
- including:222.8-223.3
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-11T00:00:00.000Z
Reasoning: Expanded from assay table. 0.457 g/t gold is weak against the default band [5, 2, 1, 0.3] g/t. Grade×width 0.2 g/t·m is below (grade alone is weak; the better of the two is used).
Negative factors
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.457”
Context: including
includingIshkōday Project · silverGrade: 20.6Grade Unit: g/tIntercept: 0.5 mView all detailsHide details
Identity
- Hole ID
- including
- Project
- Ishkōday Project
- Commodity
- silver
- Region
- canada_on
- Reported Region
- Ontario, Canada
- Ticker
- LME
Geometry
- Grade
- 20.6
- Grade Unit
- g/t
- Intercept
- 0.5 m
- From
- 222.8 m
- To
- 223.3 m
Classification
- Deposit Type
- orogenic
- Sample Type
- drill
- Group ID
- including:222.8-223.3
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-11T00:00:00.000Z
Reasoning: Expanded from assay table. 20.6 g/t silver is below against the default band [500, 200, 100, 30] g/t. Grade×width 10.3 g/t·m is below.
Negative factors
- 20.6 g/t silver is below the weak threshold (30 g/t) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“20.60”
Context: including
includingIshkōday Project · copperGrade: 0.03Grade Unit: %Intercept: 0.5 mView all detailsHide details
Identity
- Hole ID
- including
- Project
- Ishkōday Project
- Commodity
- copper
- Region
- canada_on
- Reported Region
- Ontario, Canada
- Ticker
- LME
Geometry
- Grade
- 0.03
- Grade Unit
- %
- Intercept
- 0.5 m
- From
- 222.8 m
- To
- 223.3 m
Classification
- Deposit Type
- orogenic
- Sample Type
- drill
- Group ID
- including:222.8-223.3
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-11T00:00:00.000Z
Reasoning: Expanded from assay table. 0.03 % copper is below against the default band [2.5, 1, 0.5, 0.25] %. Grade×width 0.0 %·m is below.
Negative factors
- 0.03 % copper is below the weak threshold (0.25 %) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.03”
Context: including
includingIshkōday Project · zincGrade: 2.55Grade Unit: %Intercept: 0.5 mView all detailsHide details
Identity
- Hole ID
- including
- Project
- Ishkōday Project
- Commodity
- zinc
- Region
- canada_on
- Reported Region
- Ontario, Canada
- Ticker
- LME
Geometry
- Grade
- 2.55
- Grade Unit
- %
- Intercept
- 0.5 m
- From
- 222.8 m
- To
- 223.3 m
Classification
- Deposit Type
- orogenic
- Sample Type
- drill
- Group ID
- including:222.8-223.3
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-11T00:00:00.000Z
Reasoning: Expanded from assay table. 2.55 % zinc is weak against the default band [18, 10, 5, 2] %. Grade×width 1.3 %·m is below (grade alone is weak; the better of the two is used).
Negative factors
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“2.55”
Context: including
includingIshkōday Project · goldGrade: 1.114Grade Unit: g/tIntercept: 3.3 mView all detailsHide details
Identity
- Hole ID
- including
- Project
- Ishkōday Project
- Commodity
- gold
- Region
- canada_on
- Reported Region
- Ontario, Canada
- Ticker
- LME
Geometry
- Grade
- 1.114
- Grade Unit
- g/t
- Intercept
- 3.3 m
- From
- 230.3 m
- To
- 233.6 m
Classification
- Deposit Type
- orogenic
- Sample Type
- drill
- Group ID
- including:230.3-233.6
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-11T00:00:00.000Z
Reasoning: Expanded from assay table. 1.114 g/t gold is moderate against the default band [5, 2, 1, 0.3] g/t. Grade×width 3.7 g/t·m is below (grade alone is moderate; the better of the two is used).
Negative factors
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“1.114”
Context: including
includingIshkōday Project · silverGrade: 6.35Grade Unit: g/tIntercept: 3.3 mView all detailsHide details
Identity
- Hole ID
- including
- Project
- Ishkōday Project
- Commodity
- silver
- Region
- canada_on
- Reported Region
- Ontario, Canada
- Ticker
- LME
Geometry
- Grade
- 6.35
- Grade Unit
- g/t
- Intercept
- 3.3 m
- From
- 230.3 m
- To
- 233.6 m
Classification
- Deposit Type
- orogenic
- Sample Type
- drill
- Group ID
- including:230.3-233.6
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-11T00:00:00.000Z
Reasoning: Expanded from assay table. 6.35 g/t silver is below against the default band [500, 200, 100, 30] g/t. Grade×width 21.0 g/t·m is below.
Negative factors
- 6.35 g/t silver is below the weak threshold (30 g/t) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“6.35”
Context: including
includingIshkōday Project · copperGrade: 0.07Grade Unit: %Intercept: 3.3 mView all detailsHide details
Identity
- Hole ID
- including
- Project
- Ishkōday Project
- Commodity
- copper
- Region
- canada_on
- Reported Region
- Ontario, Canada
- Ticker
- LME
Geometry
- Grade
- 0.07
- Grade Unit
- %
- Intercept
- 3.3 m
- From
- 230.3 m
- To
- 233.6 m
Classification
- Deposit Type
- orogenic
- Sample Type
- drill
- Group ID
- including:230.3-233.6
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-11T00:00:00.000Z
Reasoning: Expanded from assay table. 0.07 % copper is below against the default band [2.5, 1, 0.5, 0.25] %. Grade×width 0.2 %·m is below.
Negative factors
- 0.07 % copper is below the weak threshold (0.25 %) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.07”
Context: including
includingIshkōday Project · zincGrade: 1.78Grade Unit: %Intercept: 3.3 mView all detailsHide details
Identity
- Hole ID
- including
- Project
- Ishkōday Project
- Commodity
- zinc
- Region
- canada_on
- Reported Region
- Ontario, Canada
- Ticker
- LME
Geometry
- Grade
- 1.78
- Grade Unit
- %
- Intercept
- 3.3 m
- From
- 230.3 m
- To
- 233.6 m
Classification
- Deposit Type
- orogenic
- Sample Type
- drill
- Group ID
- including:230.3-233.6
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-11T00:00:00.000Z
Reasoning: Expanded from assay table. 1.78 % zinc is below against the default band [18, 10, 5, 2] %. Grade×width 5.9 %·m is below.
Negative factors
- 1.78 % zinc is below the weak threshold (2 %) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“1.78”
Context: including
includingIshkōday Project · goldGrade: 2.6Grade Unit: g/tIntercept: 0.5 mView all detailsHide details
Identity
- Hole ID
- including
- Project
- Ishkōday Project
- Commodity
- gold
- Region
- canada_on
- Reported Region
- Ontario, Canada
- Ticker
- LME
Geometry
- Grade
- 2.6
- Grade Unit
- g/t
- Intercept
- 0.5 m
- From
- 230.3 m
- To
- 230.8 m
Classification
- Deposit Type
- orogenic
- Sample Type
- drill
- Group ID
- including:230.3-230.8
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-11T00:00:00.000Z
Reasoning: Expanded from assay table. 2.6 g/t gold is strong against the default band [5, 2, 1, 0.3] g/t. Grade×width 1.3 g/t·m is below (grade alone is strong; the better of the two is used).
Positive factors
- 2.6 g/t gold is strong on the default band.
Negative factors
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“2.600”
Context: including
includingIshkōday Project · silverGrade: 13.6Grade Unit: g/tIntercept: 0.5 mView all detailsHide details
Identity
- Hole ID
- including
- Project
- Ishkōday Project
- Commodity
- silver
- Region
- canada_on
- Reported Region
- Ontario, Canada
- Ticker
- LME
Geometry
- Grade
- 13.6
- Grade Unit
- g/t
- Intercept
- 0.5 m
- From
- 230.3 m
- To
- 230.8 m
Classification
- Deposit Type
- orogenic
- Sample Type
- drill
- Group ID
- including:230.3-230.8
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-11T00:00:00.000Z
Reasoning: Expanded from assay table. 13.6 g/t silver is below against the default band [500, 200, 100, 30] g/t. Grade×width 6.8 g/t·m is below.
Negative factors
- 13.6 g/t silver is below the weak threshold (30 g/t) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“13.60”
Context: including
includingIshkōday Project · copperGrade: 0.1Grade Unit: %Intercept: 0.5 mView all detailsHide details
Identity
- Hole ID
- including
- Project
- Ishkōday Project
- Commodity
- copper
- Region
- canada_on
- Reported Region
- Ontario, Canada
- Ticker
- LME
Geometry
- Grade
- 0.1
- Grade Unit
- %
- Intercept
- 0.5 m
- From
- 230.3 m
- To
- 230.8 m
Classification
- Deposit Type
- orogenic
- Sample Type
- drill
- Group ID
- including:230.3-230.8
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-11T00:00:00.000Z
Reasoning: Expanded from assay table. 0.1 % copper is below against the default band [2.5, 1, 0.5, 0.25] %. Grade×width 0.1 %·m is below.
Negative factors
- 0.1 % copper is below the weak threshold (0.25 %) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.10”
Context: including
includingIshkōday Project · zincGrade: 6.75Grade Unit: %Intercept: 0.5 mView all detailsHide details
Identity
- Hole ID
- including
- Project
- Ishkōday Project
- Commodity
- zinc
- Region
- canada_on
- Reported Region
- Ontario, Canada
- Ticker
- LME
Geometry
- Grade
- 6.75
- Grade Unit
- %
- Intercept
- 0.5 m
- From
- 230.3 m
- To
- 230.8 m
Classification
- Deposit Type
- orogenic
- Sample Type
- drill
- Group ID
- including:230.3-230.8
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-11T00:00:00.000Z
Reasoning: Expanded from assay table. 6.75 % zinc is moderate against the default band [18, 10, 5, 2] %. Grade×width 3.4 %·m is below (grade alone is moderate; the better of the two is used).
Negative factors
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“6.75”
Context: including
How Atlas produces this analysis
Minestarters Atlas uses automated extraction to summarize mining announcements, identify reported measurements, and classify supporting evidence. Sentiment reflects the extracted narrative and classification rules; it is an interpretation, not a reported measurement. Evidence quotes and context are provided where available. Missing data, low-confidence results, and review flags indicate limitations. Check the original publisher announcement before relying on an interpretation.