# KOB: Thick, High-Grade Tin Intersected at the Mt Garnet Project Canonical Atlas analysis: https://atlas-staging.minestarters.com/news/kob-thick-high-grade-tin-intersected-at-the-mt-garnet-project--9ef8b14b-4cc4-486b-92ee-9b0ec78fa39f Original source: https://www.asx.com.au/asx/v2/statistics/displayAnnouncement.do?display=pdf&idsId=03151950 Publisher: asx Original announcement: 2026-10-13T21:20:00.000Z Analysis by Minestarters Atlas Atlas analysis published: 2026-10-13T22:32:55.796Z Atlas analysis updated: 2026-10-13T22:32:55.796Z - Company: Koba Resources Limited - Ticker: KOB - Exchange: ASX - Region: North Queensland - Primary commodity: Tin - Secondary commodities: Copper, Tungsten, Silver, Zinc, Lead, Indium - Document categories: Drill results - Extracted: 2026-10-13 22:32:56 UTC Narrative sentiment: 0.80 · Bullish ## Minestarters Atlas summary Koba Resources Limited announced exceptional high-grade tin intersections from its maiden RC drilling program at the Mt Garnet Tin-Tungsten Project in North Queensland. Highlights include 29m at 1.17% Sn, with higher-grade zones up to 8.75% Sn, demonstrating significant mineralization potential. The company plans follow-up infill and extensional drilling to further define the extent of these discoveries. Reasoning: Koba Resources' maiden drilling at Mt Garnet delivered exceptional high-grade tin intercepts, including 8.75% Sn over 1m and 6.34% Sn over 2m, which are well above previous best results for the project. The discovery of broad mineralization \(29m @ 1.17% Sn\) and the potential for strike extensions highlight significant project upside. While true widths are not known and some associated metal grades are lower than historical RAG comparables, the overall results are highly positive for an early-stage exploration program. - Positive factor: Exceptional high-grade tin intercepts, significantly exceeding prior best results for the project - Positive factor: Broad widths of tin mineralization, indicating potential for significant resource scale - Positive factor: Maiden drilling program successfully identified new mineralization and extended known zones - Positive factor: Strong associated copper, tungsten, and silver mineralization adds potential value - Positive factor: Comprehensive QA/QC procedures disclosed, including certified lab and QP sign-off - Negative factor: True widths are not yet known, which may overstate reported intercept lengths - Negative factor: Silver detection limit of 10 g/t is high for the mineralized system, potentially understating silver grades - Negative factor: Tungsten, copper, and silver grades are significantly lower than some historical RAG comparables, though these comparables might be outliers or from different contexts Facts used in scoring: 89 ## Classification and evidence No classification tags are available. ## Extracted facts Stored fact records: 89. Some facts used in scoring do not have a stored record. ## Drill Results (89) ### MGRC011 [Link to this fact](https://atlas-staging.minestarters.com/news/kob-thick-high-grade-tin-intersected-at-the-mt-garnet-project--9ef8b14b-4cc4-486b-92ee-9b0ec78fa39f#fact-drill-facts-0) Mt Garnet · tin #### Identity - Hole ID: MGRC011 - Project: Mt Garnet - Commodity: tin - Region: australia\_qld - Reported Region: australia\_qld - Ticker: KOB #### Geometry - Grade: 1.17 - Grade Unit: % - Intercept: 29 m - From: 111 m - To: 140 m - Hole Depth: 162 m - Intercept Depth: 111 m #### Classification - Deposit Type: other - Program: exploration - Sample Type: drill - Group ID: MGRC011:111-140 - Mining Method: underground #### Location - Easting: 279795 - Northing: 8059962 - Elevation: 642 m - Azimuth: 44 ° - Dip: -70 ° - Loc. Confidence: high - Loc. Source: document #### QA/QC - Laboratory: Intertek Minerals Townsville Laboratory and Intertek Genalysis Perth - QA/QC Disclosed: Yes - QP Signed: Yes - QA/QC Methods: standards, blanks, duplicates #### Compositing - Cutoff Grade: 0.1 - Cutoff Unit: % Sn - Dilution Disclosed: Yes - Max Dilution: 2 m #### Review - Needs Review: No - Interp. Status: scored - Historical: No #### Dates - Event date: 2026-10-13T00:00:00.000Z Reasoning: A 29m intercept at 1.17% Sn is a good result for a maiden drilling program, indicating significant width of mineralization, though the grade is moderate for an underground target. - Positive factor: Moderate grade for tin in an underground context - Positive factor: Continuous width of 29m is significant - Positive factor: Part of a maiden drilling program, indicating high novelty - Negative factor: True width not known #### Tags used in scoring **QA/QC Disclosed** Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Why it applies: qaqc\_disclosed is true **Compositing Transparent** Polarity: positive Definition: Cut-off grade and internal dilution rules are clearly stated for reported intervals. Why it applies: cutoff\_grade and internal dilution are both stated **Nearology Play** Polarity: neutral Definition: Value premise rests on proximity to a known deposit rather than own results. Why it applies: proximity is offered as the value premise: "21 initial broadly spaced drill holes were completed at the Stannex Prospect, approximately 1km northeast of the Gilmore" ### MGRC011 [Link to this fact](https://atlas-staging.minestarters.com/news/kob-thick-high-grade-tin-intersected-at-the-mt-garnet-project--9ef8b14b-4cc4-486b-92ee-9b0ec78fa39f#fact-drill-facts-1) Mt Garnet · copper #### Identity - Hole ID: MGRC011 - Project: Mt Garnet - Commodity: copper - Region: australia\_qld - Reported Region: australia\_qld - Ticker: KOB #### Geometry - Grade: 0.36 - Grade Unit: % - Intercept: 29 m - From: 111 m - To: 140 m - Hole Depth: 162 m - Intercept Depth: 111 m #### Classification - Deposit Type: other - Program: exploration - Sample Type: drill - Group ID: MGRC011:111-140 - Mining Method: underground #### Location - Easting: 279795 - Northing: 8059962 - Elevation: 642 m - Azimuth: 44 ° - Dip: -70 ° - Loc. Confidence: high - Loc. Source: document #### QA/QC - Laboratory: Intertek Minerals Townsville Laboratory and Intertek Genalysis Perth - QA/QC Disclosed: Yes - QP Signed: Yes - QA/QC Methods: standards, blanks, duplicates #### Compositing - Cutoff Grade: 0.1 - Cutoff Unit: % Sn - Dilution Disclosed: Yes - Max Dilution: 2 m #### Review - Needs Review: No - Interp. Status: scored - Historical: No #### Dates - Event date: 2026-10-13T00:00:00.000Z Reasoning: The copper grade of 0.36% over 29m is low for an underground target, but represents associated mineralization in a new discovery. - Positive factor: Associated mineralization in a new discovery - Negative factor: Low copper grade for an underground target - Negative factor: True width not known #### Tags used in scoring **QA/QC Disclosed** Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Why it applies: qaqc\_disclosed is true **Compositing Transparent** Polarity: positive Definition: Cut-off grade and internal dilution rules are clearly stated for reported intervals. Why it applies: cutoff\_grade and internal dilution are both stated **Nearology Play** Polarity: neutral Definition: Value premise rests on proximity to a known deposit rather than own results. Why it applies: proximity is offered as the value premise: "21 initial broadly spaced drill holes were completed at the Stannex Prospect, approximately 1km northeast of the Gilmore" ### MGRC011 [Link to this fact](https://atlas-staging.minestarters.com/news/kob-thick-high-grade-tin-intersected-at-the-mt-garnet-project--9ef8b14b-4cc4-486b-92ee-9b0ec78fa39f#fact-drill-facts-2) Mt Garnet · tungsten #### Identity - Hole ID: MGRC011 - Project: Mt Garnet - Commodity: tungsten - Region: australia\_qld - Reported Region: australia\_qld - Ticker: KOB #### Geometry - Grade: 0.017 - Grade Unit: % - Intercept: 29 m - From: 111 m - To: 140 m - Hole Depth: 162 m - Intercept Depth: 111 m #### Classification - Deposit Type: other - Program: exploration - Sample Type: drill - Group ID: MGRC011:111-140 - Mining Method: underground #### Location - Easting: 279795 - Northing: 8059962 - Elevation: 642 m - Azimuth: 44 ° - Dip: -70 ° - Loc. Confidence: high - Loc. Source: document #### QA/QC - Laboratory: Intertek Minerals Townsville Laboratory and Intertek Genalysis Perth - QA/QC Disclosed: Yes - QP Signed: Yes - QA/QC Methods: standards, blanks, duplicates #### Compositing - Cutoff Grade: 0.1 - Cutoff Unit: % Sn - Dilution Disclosed: Yes - Max Dilution: 2 m #### Review - Needs Review: No - Interp. Status: scored - Historical: No #### Dates - Event date: 2026-10-13T00:00:00.000Z Reasoning: The tungsten grade of 0.017% \(170 ppm\) over 29m is very low and unlikely to be economic, but is noted as associated mineralization. - Positive factor: Associated mineralization in a new discovery - Negative factor: Very low tungsten grade - Negative factor: True width not known #### Tags used in scoring **QA/QC Disclosed** Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Why it applies: qaqc\_disclosed is true **Compositing Transparent** Polarity: positive Definition: Cut-off grade and internal dilution rules are clearly stated for reported intervals. Why it applies: cutoff\_grade and internal dilution are both stated **Nearology Play** Polarity: neutral Definition: Value premise rests on proximity to a known deposit rather than own results. Why it applies: proximity is offered as the value premise: "21 initial broadly spaced drill holes were completed at the Stannex Prospect, approximately 1km northeast of the Gilmore" ### MGRC011 [Link to this fact](https://atlas-staging.minestarters.com/news/kob-thick-high-grade-tin-intersected-at-the-mt-garnet-project--9ef8b14b-4cc4-486b-92ee-9b0ec78fa39f#fact-drill-facts-3) Mt Garnet · silver #### Identity - Hole ID: MGRC011 - Project: Mt Garnet - Commodity: silver - Region: australia\_qld - Reported Region: australia\_qld - Ticker: KOB #### Geometry - Grade: 22 - Grade Unit: g/t - Intercept: 29 m - From: 111 m - To: 140 m - Hole Depth: 162 m - Intercept Depth: 111 m #### Classification - Deposit Type: other - Program: exploration - Sample Type: drill - Group ID: MGRC011:111-140 - Mining Method: underground #### Location - Easting: 279795 - Northing: 8059962 - Elevation: 642 m - Azimuth: 44 ° - Dip: -70 ° - Loc. Confidence: high - Loc. Source: document #### QA/QC - Laboratory: Intertek Minerals Townsville Laboratory and Intertek Genalysis Perth - QA/QC Disclosed: Yes - QP Signed: Yes - QA/QC Methods: standards, blanks, duplicates #### Compositing - Cutoff Grade: 0.1 - Cutoff Unit: % Sn - Dilution Disclosed: Yes - Max Dilution: 2 m #### Review - Needs Review: No - Interp. Status: scored - Historical: No #### Dates - Event date: 2026-10-13T00:00:00.000Z Reasoning: The silver grade of 22 g/t over 29m is low for an underground target, and the high detection limit for silver reduces confidence in the reported value. - Positive factor: Associated mineralization in a new discovery - Negative factor: Low silver grade for an underground target - Negative factor: True width not known - Negative factor: High detection limit for silver \(10 g/t\) reduces confidence in reported values #### Tags used in scoring **QA/QC Disclosed** Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Why it applies: qaqc\_disclosed is true **Compositing Transparent** Polarity: positive Definition: Cut-off grade and internal dilution rules are clearly stated for reported intervals. Why it applies: cutoff\_grade and internal dilution are both stated **Nearology Play** Polarity: neutral Definition: Value premise rests on proximity to a known deposit rather than own results. Why it applies: proximity is offered as the value premise: "21 initial broadly spaced drill holes were completed at the Stannex Prospect, approximately 1km northeast of the Gilmore" ### MGRC011 [Link to this fact](https://atlas-staging.minestarters.com/news/kob-thick-high-grade-tin-intersected-at-the-mt-garnet-project--9ef8b14b-4cc4-486b-92ee-9b0ec78fa39f#fact-drill-facts-4) Mt Garnet · tin #### Identity - Hole ID: MGRC011 - Project: Mt Garnet - Commodity: tin - Region: australia\_qld - Reported Region: australia\_qld - Ticker: KOB #### Geometry - Grade: 1.99 - Grade Unit: % - Intercept: 15 m - From: 117 m - To: 132 m - Hole Depth: 162 m - Intercept Depth: 111 m #### Classification - Deposit Type: other - Program: exploration - Sample Type: drill - Group ID: MGRC011:117-132 - Mining Method: underground #### Location - Easting: 279795 - Northing: 8059962 - Elevation: 642 m - Azimuth: 44 ° - Dip: -70 ° - Loc. Confidence: high - Loc. Source: document #### QA/QC - Laboratory: Intertek Minerals Townsville Laboratory and Intertek Genalysis Perth - QA/QC Disclosed: Yes - QP Signed: Yes - QA/QC Methods: standards, blanks, duplicates #### Compositing - Cutoff Grade: 0.4 - Cutoff Unit: % Sn - Dilution Disclosed: Yes - Max Dilution: 2 m #### Review - Needs Review: No - Interp. Status: scored - Historical: No #### Dates - Event date: 2026-10-13T00:00:00.000Z Reasoning: This intercept of 15m at 1.99% Sn is an exceptional result, demonstrating high-grade tin mineralization over a significant width, well above the project's historical best grade-width product. - Positive factor: Exceptional grade for tin in an underground context - Positive factor: Strong continuous width of 15m - Positive factor: Significantly higher than the project's prior best grade of 5.2% Sn over 1m \(GT 5.2\) - Negative factor: True width not known #### Tags used in scoring **QA/QC Disclosed** Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Why it applies: qaqc\_disclosed is true **Compositing Transparent** Polarity: positive Definition: Cut-off grade and internal dilution rules are clearly stated for reported intervals. Why it applies: cutoff\_grade and internal dilution are both stated **Nearology Play** Polarity: neutral Definition: Value premise rests on proximity to a known deposit rather than own results. Why it applies: proximity is offered as the value premise: "21 initial broadly spaced drill holes were completed at the Stannex Prospect, approximately 1km northeast of the Gilmore" ### MGRC011 [Link to this fact](https://atlas-staging.minestarters.com/news/kob-thick-high-grade-tin-intersected-at-the-mt-garnet-project--9ef8b14b-4cc4-486b-92ee-9b0ec78fa39f#fact-drill-facts-5) Mt Garnet · copper #### Identity - Hole ID: MGRC011 - Project: Mt Garnet - Commodity: copper - Region: australia\_qld - Reported Region: australia\_qld - Ticker: KOB #### Geometry - Grade: 0.58 - Grade Unit: % - Intercept: 15 m - From: 117 m - To: 132 m - Hole Depth: 162 m - Intercept Depth: 111 m #### Classification - Deposit Type: other - Program: exploration - Sample Type: drill - Group ID: MGRC011:117-132 - Mining Method: underground #### Location - Easting: 279795 - Northing: 8059962 - Elevation: 642 m - Azimuth: 44 ° - Dip: -70 ° - Loc. Confidence: high - Loc. Source: document #### QA/QC - Laboratory: Intertek Minerals Townsville Laboratory and Intertek Genalysis Perth - QA/QC Disclosed: Yes - QP Signed: Yes - QA/QC Methods: standards, blanks, duplicates #### Compositing - Cutoff Grade: 0.4 - Cutoff Unit: % Sn - Dilution Disclosed: Yes - Max Dilution: 2 m #### Review - Needs Review: No - Interp. Status: scored - Historical: No #### Dates - Event date: 2026-10-13T00:00:00.000Z Reasoning: The copper grade of 0.58% over 15m is low for an underground target, but represents associated mineralization within a high-grade tin zone. - Positive factor: Associated mineralization in a new discovery - Negative factor: Low copper grade for an underground target - Negative factor: True width not known #### Tags used in scoring **QA/QC Disclosed** Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Why it applies: qaqc\_disclosed is true **Compositing Transparent** Polarity: positive Definition: Cut-off grade and internal dilution rules are clearly stated for reported intervals. Why it applies: cutoff\_grade and internal dilution are both stated **Nearology Play** Polarity: neutral Definition: Value premise rests on proximity to a known deposit rather than own results. Why it applies: proximity is offered as the value premise: "21 initial broadly spaced drill holes were completed at the Stannex Prospect, approximately 1km northeast of the Gilmore" ### MGRC011 [Link to this fact](https://atlas-staging.minestarters.com/news/kob-thick-high-grade-tin-intersected-at-the-mt-garnet-project--9ef8b14b-4cc4-486b-92ee-9b0ec78fa39f#fact-drill-facts-6) Mt Garnet · tungsten #### Identity - Hole ID: MGRC011 - Project: Mt Garnet - Commodity: tungsten - Region: australia\_qld - Reported Region: australia\_qld - Ticker: KOB #### Geometry - Grade: 0.02 - Grade Unit: % - Intercept: 15 m - From: 117 m - To: 132 m - Hole Depth: 162 m - Intercept Depth: 111 m #### Classification - Deposit Type: other - Program: exploration - Sample Type: drill - Group ID: MGRC011:117-132 - Mining Method: underground #### Location - Easting: 279795 - Northing: 8059962 - Elevation: 642 m - Azimuth: 44 ° - Dip: -70 ° - Loc. Confidence: high - Loc. Source: document #### QA/QC - Laboratory: Intertek Minerals Townsville Laboratory and Intertek Genalysis Perth - QA/QC Disclosed: Yes - QP Signed: Yes - QA/QC Methods: standards, blanks, duplicates #### Compositing - Cutoff Grade: 0.4 - Cutoff Unit: % Sn - Dilution Disclosed: Yes - Max Dilution: 2 m #### Review - Needs Review: No - Interp. Status: scored - Historical: No #### Dates - Event date: 2026-10-13T00:00:00.000Z Reasoning: The tungsten grade of 0.020% \(200 ppm\) over 15m is very low and unlikely to be economic, but is noted as associated mineralization. - Positive factor: Associated mineralization in a new discovery - Negative factor: Very low tungsten grade - Negative factor: True width not known #### Tags used in scoring **QA/QC Disclosed** Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Why it applies: qaqc\_disclosed is true **Compositing Transparent** Polarity: positive Definition: Cut-off grade and internal dilution rules are clearly stated for reported intervals. Why it applies: cutoff\_grade and internal dilution are both stated **Nearology Play** Polarity: neutral Definition: Value premise rests on proximity to a known deposit rather than own results. Why it applies: proximity is offered as the value premise: "21 initial broadly spaced drill holes were completed at the Stannex Prospect, approximately 1km northeast of the Gilmore" ### MGRC011 [Link to this fact](https://atlas-staging.minestarters.com/news/kob-thick-high-grade-tin-intersected-at-the-mt-garnet-project--9ef8b14b-4cc4-486b-92ee-9b0ec78fa39f#fact-drill-facts-7) Mt Garnet · silver #### Identity - Hole ID: MGRC011 - Project: Mt Garnet - Commodity: silver - Region: australia\_qld - Reported Region: australia\_qld - Ticker: KOB #### Geometry - Grade: 33 - Grade Unit: g/t - Intercept: 15 m - From: 117 m - To: 132 m - Hole Depth: 162 m - Intercept Depth: 111 m #### Classification - Deposit Type: other - Program: exploration - Sample Type: drill - Group ID: MGRC011:117-132 - Mining Method: underground #### Location - Easting: 279795 - Northing: 8059962 - Elevation: 642 m - Azimuth: 44 ° - Dip: -70 ° - Loc. Confidence: high - Loc. Source: document #### QA/QC - Laboratory: Intertek Minerals Townsville Laboratory and Intertek Genalysis Perth - QA/QC Disclosed: Yes - QP Signed: Yes - QA/QC Methods: standards, blanks, duplicates #### Compositing - Cutoff Grade: 0.4 - Cutoff Unit: % Sn - Dilution Disclosed: Yes - Max Dilution: 2 m #### Review - Needs Review: No - Interp. Status: scored - Historical: No #### Dates - Event date: 2026-10-13T00:00:00.000Z Reasoning: The silver grade of 33 g/t over 15m is low for an underground target, and the high detection limit for silver reduces confidence in the reported value. - Positive factor: Associated mineralization in a new discovery - Negative factor: Low silver grade for an underground target - Negative factor: True width not known - Negative factor: High detection limit for silver \(10 g/t\) reduces confidence in reported values #### Tags used in scoring **QA/QC Disclosed** Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Why it applies: qaqc\_disclosed is true **Compositing Transparent** Polarity: positive Definition: Cut-off grade and internal dilution rules are clearly stated for reported intervals. Why it applies: cutoff\_grade and internal dilution are both stated **Nearology Play** Polarity: neutral Definition: Value premise rests on proximity to a known deposit rather than own results. Why it applies: proximity is offered as the value premise: "21 initial broadly spaced drill holes were completed at the Stannex Prospect, approximately 1km northeast of the Gilmore" ### MGRC011 [Link to this fact](https://atlas-staging.minestarters.com/news/kob-thick-high-grade-tin-intersected-at-the-mt-garnet-project--9ef8b14b-4cc4-486b-92ee-9b0ec78fa39f#fact-drill-facts-8) Mt Garnet · tin #### Identity - Hole ID: MGRC011 - Project: Mt Garnet - Commodity: tin - Region: australia\_qld - Reported Region: australia\_qld - Ticker: KOB #### Geometry - Grade: 6.34 - Grade Unit: % - Intercept: 2 m - From: 126 m - To: 128 m - Hole Depth: 162 m - Intercept Depth: 111 m #### Classification - Deposit Type: other - Program: exploration - Sample Type: drill - Group ID: MGRC011:126-128 - Mining Method: underground #### Location - Easting: 279795 - Northing: 8059962 - Elevation: 642 m - Azimuth: 44 ° - Dip: -70 ° - Loc. Confidence: high - Loc. Source: document #### QA/QC - Laboratory: Intertek Minerals Townsville Laboratory and Intertek Genalysis Perth - QA/QC Disclosed: Yes - QP Signed: Yes - QA/QC Methods: standards, blanks, duplicates #### Compositing - Cutoff Grade: 2 - Cutoff Unit: % Sn - Dilution Disclosed: Yes - Max Dilution: 2 m #### Review - Needs Review: No - Interp. Status: scored - Historical: No #### Dates - Event date: 2026-10-13T00:00:00.000Z Reasoning: This intercept of 2m at 6.34% Sn is a bonanza-grade result, demonstrating very high-grade tin mineralization comparable to historical production, and significantly exceeding prior best results for the project. - Positive factor: Bonanza grade for tin in an underground context - Positive factor: Significantly higher than the project's prior best grade of 5.2% Sn - Positive factor: Close to historical production grades of 7.6% Sn - Negative factor: Narrow width of 2m - Negative factor: True width not known #### Tags used in scoring **QA/QC Disclosed** Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Why it applies: qaqc\_disclosed is true **Compositing Transparent** Polarity: positive Definition: Cut-off grade and internal dilution rules are clearly stated for reported intervals. Why it applies: cutoff\_grade and internal dilution are both stated **Nearology Play** Polarity: neutral Definition: Value premise rests on proximity to a known deposit rather than own results. Why it applies: proximity is offered as the value premise: "21 initial broadly spaced drill holes were completed at the Stannex Prospect, approximately 1km northeast of the Gilmore" ### MGRC011 [Link to this fact](https://atlas-staging.minestarters.com/news/kob-thick-high-grade-tin-intersected-at-the-mt-garnet-project--9ef8b14b-4cc4-486b-92ee-9b0ec78fa39f#fact-drill-facts-9) Mt Garnet · copper #### Identity - Hole ID: MGRC011 - Project: Mt Garnet - Commodity: copper - Region: australia\_qld - Reported Region: australia\_qld - Ticker: KOB #### Geometry - Grade: 0.44 - Grade Unit: % - Intercept: 2 m - From: 126 m - To: 128 m - Hole Depth: 162 m - Intercept Depth: 111 m #### Classification - Deposit Type: other - Program: exploration - Sample Type: drill - Group ID: MGRC011:126-128 - Mining Method: underground #### Location - Easting: 279795 - Northing: 8059962 - Elevation: 642 m - Azimuth: 44 ° - Dip: -70 ° - Loc. Confidence: high - Loc. Source: document #### QA/QC - Laboratory: Intertek Minerals Townsville Laboratory and Intertek Genalysis Perth - QA/QC Disclosed: Yes - QP Signed: Yes - QA/QC Methods: standards, blanks, duplicates #### Compositing - Cutoff Grade: 2 - Cutoff Unit: % Sn - Dilution Disclosed: Yes - Max Dilution: 2 m #### Review - Needs Review: No - Interp. Status: scored - Historical: No #### Dates - Event date: 2026-10-13T00:00:00.000Z Reasoning: The copper grade of 0.44% over 2m is low for an underground target, but represents associated mineralization within a bonanza-grade tin zone. - Positive factor: Associated mineralization in a new discovery - Negative factor: Low copper grade for an underground target - Negative factor: True width not known #### Tags used in scoring **QA/QC Disclosed** Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Why it applies: qaqc\_disclosed is true **Compositing Transparent** Polarity: positive Definition: Cut-off grade and internal dilution rules are clearly stated for reported intervals. Why it applies: cutoff\_grade and internal dilution are both stated **Nearology Play** Polarity: neutral Definition: Value premise rests on proximity to a known deposit rather than own results. Why it applies: proximity is offered as the value premise: "21 initial broadly spaced drill holes were completed at the Stannex Prospect, approximately 1km northeast of the Gilmore" ### MGRC011 [Link to this fact](https://atlas-staging.minestarters.com/news/kob-thick-high-grade-tin-intersected-at-the-mt-garnet-project--9ef8b14b-4cc4-486b-92ee-9b0ec78fa39f#fact-drill-facts-10) Mt Garnet · tungsten #### Identity - Hole ID: MGRC011 - Project: Mt Garnet - Commodity: tungsten - Region: australia\_qld - Reported Region: australia\_qld - Ticker: KOB #### Geometry - Grade: 0.017 - Grade Unit: % - Intercept: 2 m - From: 126 m - To: 128 m - Hole Depth: 162 m - Intercept Depth: 111 m #### Classification - Deposit Type: other - Program: exploration - Sample Type: drill - Group ID: MGRC011:126-128 - Mining Method: underground #### Location - Easting: 279795 - Northing: 8059962 - Elevation: 642 m - Azimuth: 44 ° - Dip: -70 ° - Loc. Confidence: high - Loc. Source: document #### QA/QC - Laboratory: Intertek Minerals Townsville Laboratory and Intertek Genalysis Perth - QA/QC Disclosed: Yes - QP Signed: Yes - QA/QC Methods: standards, blanks, duplicates #### Compositing - Cutoff Grade: 2 - Cutoff Unit: % Sn - Dilution Disclosed: Yes - Max Dilution: 2 m #### Review - Needs Review: No - Interp. Status: scored - Historical: No #### Dates - Event date: 2026-10-13T00:00:00.000Z Reasoning: The tungsten grade of 0.017% \(170 ppm\) over 2m is very low and unlikely to be economic, but is noted as associated mineralization. - Positive factor: Associated mineralization in a new discovery - Negative factor: Very low tungsten grade - Negative factor: True width not known #### Tags used in scoring **QA/QC Disclosed** Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Why it applies: qaqc\_disclosed is true **Compositing Transparent** Polarity: positive Definition: Cut-off grade and internal dilution rules are clearly stated for reported intervals. Why it applies: cutoff\_grade and internal dilution are both stated **Nearology Play** Polarity: neutral Definition: Value premise rests on proximity to a known deposit rather than own results. Why it applies: proximity is offered as the value premise: "21 initial broadly spaced drill holes were completed at the Stannex Prospect, approximately 1km northeast of the Gilmore" ### MGRC011 [Link to this fact](https://atlas-staging.minestarters.com/news/kob-thick-high-grade-tin-intersected-at-the-mt-garnet-project--9ef8b14b-4cc4-486b-92ee-9b0ec78fa39f#fact-drill-facts-11) Mt Garnet · silver #### Identity - Hole ID: MGRC011 - Project: Mt Garnet - Commodity: silver - Region: australia\_qld - Reported Region: australia\_qld - Ticker: KOB #### Geometry - Grade: 26 - Grade Unit: g/t - Intercept: 2 m - From: 126 m - To: 128 m - Hole Depth: 162 m - Intercept Depth: 111 m #### Classification - Deposit Type: other - Program: exploration - Sample Type: drill - Group ID: MGRC011:126-128 - Mining Method: underground #### Location - Easting: 279795 - Northing: 8059962 - Elevation: 642 m - Azimuth: 44 ° - Dip: -70 ° - Loc. Confidence: high - Loc. Source: document #### QA/QC - Laboratory: Intertek Minerals Townsville Laboratory and Intertek Genalysis Perth - QA/QC Disclosed: Yes - QP Signed: Yes - QA/QC Methods: standards, blanks, duplicates #### Compositing - Cutoff Grade: 2 - Cutoff Unit: % Sn - Dilution Disclosed: Yes - Max Dilution: 2 m #### Review - Needs Review: No - Interp. Status: scored - Historical: No #### Dates - Event date: 2026-10-13T00:00:00.000Z Reasoning: The silver grade of 26 g/t over 2m is low for an underground target, and the high detection limit for silver reduces confidence in the reported value. - Positive factor: Associated mineralization in a new discovery - Negative factor: Low silver grade for an underground target - Negative factor: True width not known - Negative factor: High detection limit for silver \(10 g/t\) reduces confidence in reported values #### Tags used in scoring **QA/QC Disclosed** Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Why it applies: qaqc\_disclosed is true **Compositing Transparent** Polarity: positive Definition: Cut-off grade and internal dilution rules are clearly stated for reported intervals. Why it applies: cutoff\_grade and internal dilution are both stated **Nearology Play** Polarity: neutral Definition: Value premise rests on proximity to a known deposit rather than own results. Why it applies: proximity is offered as the value premise: "21 initial broadly spaced drill holes were completed at the Stannex Prospect, approximately 1km northeast of the Gilmore" ### MGRC013 [Link to this fact](https://atlas-staging.minestarters.com/news/kob-thick-high-grade-tin-intersected-at-the-mt-garnet-project--9ef8b14b-4cc4-486b-92ee-9b0ec78fa39f#fact-drill-facts-12) Mt Garnet · tin #### Identity - Hole ID: MGRC013 - Project: Mt Garnet - Commodity: tin - Region: australia\_qld - Reported Region: australia\_qld - Ticker: KOB #### Geometry - Grade: 0.58 - Grade Unit: % - Intercept: 5 m - From: 9 m - To: 14 m - Hole Depth: 50 m - Intercept Depth: 9 m #### Classification - Deposit Type: other - Program: exploration - Sample Type: drill - Group ID: MGRC013:9-14 - Mining Method: underground #### Location - Easting: 280018 - Northing: 8059968 - Elevation: 623 m - Azimuth: 211 ° - Dip: -54 ° - Loc. Confidence: high - Loc. Source: document #### QA/QC - Laboratory: Intertek Minerals Townsville Laboratory and Intertek Genalysis Perth - QA/QC Disclosed: Yes - QP Signed: Yes - QA/QC Methods: standards, blanks, duplicates #### Compositing - Cutoff Grade: 0.1 - Cutoff Unit: % Sn - Dilution Disclosed: Yes - Max Dilution: 2 m #### Review - Needs Review: No - Interp. Status: scored - Historical: No #### Dates - Event date: 2026-10-13T00:00:00.000Z Reasoning: This intercept of 5m at 0.58% Sn is a weak grade for an underground target but is significant for extending mineralization along strike from the main discovery. - Positive factor: Moderate width of 5m - Positive factor: Confirms mineralization 230m east of MGRC011, indicating strike potential - Negative factor: Weak grade for tin in an underground context - Negative factor: True width not known #### Tags used in scoring **QA/QC Disclosed** Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Why it applies: qaqc\_disclosed is true **Compositing Transparent** Polarity: positive Definition: Cut-off grade and internal dilution rules are clearly stated for reported intervals. Why it applies: cutoff\_grade and internal dilution are both stated **Nearology Play** Polarity: neutral Definition: Value premise rests on proximity to a known deposit rather than own results. Why it applies: proximity is offered as the value premise: "21 initial broadly spaced drill holes were completed at the Stannex Prospect, approximately 1km northeast of the Gilmore" ### MGRC013 [Link to this fact](https://atlas-staging.minestarters.com/news/kob-thick-high-grade-tin-intersected-at-the-mt-garnet-project--9ef8b14b-4cc4-486b-92ee-9b0ec78fa39f#fact-drill-facts-13) Mt Garnet · tin #### Identity - Hole ID: MGRC013 - Project: Mt Garnet - Commodity: tin - Region: australia\_qld - Reported Region: australia\_qld - Ticker: KOB #### Geometry - Grade: 1.17 - Grade Unit: % - Intercept: 2 m - From: 9 m - To: 11 m - Hole Depth: 50 m - Intercept Depth: 9 m #### Classification - Deposit Type: other - Program: exploration - Sample Type: drill - Group ID: MGRC013:9-11 - Mining Method: underground #### Location - Easting: 280018 - Northing: 8059968 - Elevation: 623 m - Azimuth: 211 ° - Dip: -54 ° - Loc. Confidence: high - Loc. Source: document #### QA/QC - Laboratory: Intertek Minerals Townsville Laboratory and Intertek Genalysis Perth - QA/QC Disclosed: Yes - QP Signed: Yes - QA/QC Methods: standards, blanks, duplicates #### Compositing - Cutoff Grade: 0.4 - Cutoff Unit: % Sn - Dilution Disclosed: Yes - Max Dilution: 2 m #### Review - Needs Review: No - Interp. Status: scored - Historical: No #### Dates - Event date: 2026-10-13T00:00:00.000Z Reasoning: This included intercept of 2m at 1.17% Sn shows moderate-grade tin mineralization, supporting the potential for strike extensions. - Positive factor: Moderate grade for tin in an underground context - Positive factor: Confirms mineralization 230m east of MGRC011, indicating strike potential - Negative factor: Narrow width of 2m - Negative factor: True width not known #### Tags used in scoring **QA/QC Disclosed** Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Why it applies: qaqc\_disclosed is true **Compositing Transparent** Polarity: positive Definition: Cut-off grade and internal dilution rules are clearly stated for reported intervals. Why it applies: cutoff\_grade and internal dilution are both stated **Nearology Play** Polarity: neutral Definition: Value premise rests on proximity to a known deposit rather than own results. Why it applies: proximity is offered as the value premise: "21 initial broadly spaced drill holes were completed at the Stannex Prospect, approximately 1km northeast of the Gilmore" ### MGRC020 [Link to this fact](https://atlas-staging.minestarters.com/news/kob-thick-high-grade-tin-intersected-at-the-mt-garnet-project--9ef8b14b-4cc4-486b-92ee-9b0ec78fa39f#fact-drill-facts-14) Mt Garnet · tin #### Identity - Hole ID: MGRC020 - Project: Mt Garnet - Commodity: tin - Region: australia\_qld - Reported Region: australia\_qld - Ticker: KOB #### Geometry - Grade: 0.67 - Grade Unit: % - Intercept: 4 m - From: 5 m - To: 9 m - Hole Depth: 90 m - Intercept Depth: 5 m #### Classification - Deposit Type: other - Program: exploration - Sample Type: drill - Group ID: MGRC020:5-9 - Mining Method: underground #### Location - Easting: 280692 - Northing: 8061120 - Elevation: 636 m - Azimuth: 43 ° - Dip: -60 ° - Loc. Confidence: high - Loc. Source: document #### QA/QC - Laboratory: Intertek Minerals Townsville Laboratory and Intertek Genalysis Perth - QA/QC Disclosed: Yes - QP Signed: Yes - QA/QC Methods: standards, blanks, duplicates #### Compositing - Cutoff Grade: 0.1 - Cutoff Unit: % Sn - Dilution Disclosed: Yes - Max Dilution: 2 m #### Review - Needs Review: No - Interp. Status: scored - Historical: No #### Dates - Event date: 2026-10-13T00:00:00.000Z Reasoning: This intercept of 4m at 0.67% Sn represents a weak but encouraging result from the maiden drilling at the Stannex Prospect, indicating new mineralization. - Positive factor: Weak grade for tin in an underground context - Positive factor: Part of a maiden drilling program at Stannex Prospect, indicating new discovery - Negative factor: True width not known #### Tags used in scoring **QA/QC Disclosed** Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Why it applies: qaqc\_disclosed is true **Compositing Transparent** Polarity: positive Definition: Cut-off grade and internal dilution rules are clearly stated for reported intervals. Why it applies: cutoff\_grade and internal dilution are both stated **Nearology Play** Polarity: neutral Definition: Value premise rests on proximity to a known deposit rather than own results. Why it applies: proximity is offered as the value premise: "21 initial broadly spaced drill holes were completed at the Stannex Prospect, approximately 1km northeast of the Gilmore" ### MGRC020 [Link to this fact](https://atlas-staging.minestarters.com/news/kob-thick-high-grade-tin-intersected-at-the-mt-garnet-project--9ef8b14b-4cc4-486b-92ee-9b0ec78fa39f#fact-drill-facts-15) Mt Garnet · tin #### Identity - Hole ID: MGRC020 - Project: Mt Garnet - Commodity: tin - Region: australia\_qld - Reported Region: australia\_qld - Ticker: KOB #### Geometry - Grade: 1.86 - Grade Unit: % - Intercept: 1 m - From: 5 m - To: 6 m - Hole Depth: 90 m - Intercept Depth: 5 m #### Classification - Deposit Type: other - Program: exploration - Sample Type: drill - Group ID: MGRC020:5-6 - Mining Method: underground #### Location - Easting: 280692 - Northing: 8061120 - Elevation: 636 m - Azimuth: 43 ° - Dip: -60 ° - Loc. Confidence: high - Loc. Source: document #### QA/QC - Laboratory: Intertek Minerals Townsville Laboratory and Intertek Genalysis Perth - QA/QC Disclosed: Yes - QP Signed: Yes - QA/QC Methods: standards, blanks, duplicates #### Compositing - Cutoff Grade: 0.4 - Cutoff Unit: % Sn - Dilution Disclosed: Yes - Max Dilution: 2 m #### Review - Needs Review: No - Interp. Status: scored - Historical: No #### Dates - Event date: 2026-10-13T00:00:00.000Z Reasoning: This included intercept of 1m at 1.86% Sn is an exceptional grade for tin, highlighting high-grade potential within the Stannex Prospect. - Positive factor: Exceptional grade for tin in an underground context - Positive factor: Part of a maiden drilling program at Stannex Prospect, indicating new discovery - Negative factor: Narrow width of 1m - Negative factor: True width not known #### Tags used in scoring **QA/QC Disclosed** Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Why it applies: qaqc\_disclosed is true **Compositing Transparent** Polarity: positive Definition: Cut-off grade and internal dilution rules are clearly stated for reported intervals. Why it applies: cutoff\_grade and internal dilution are both stated **Nearology Play** Polarity: neutral Definition: Value premise rests on proximity to a known deposit rather than own results. Why it applies: proximity is offered as the value premise: "21 initial broadly spaced drill holes were completed at the Stannex Prospect, approximately 1km northeast of the Gilmore" ### MGRC021 [Link to this fact](https://atlas-staging.minestarters.com/news/kob-thick-high-grade-tin-intersected-at-the-mt-garnet-project--9ef8b14b-4cc4-486b-92ee-9b0ec78fa39f#fact-drill-facts-16) Mt Garnet · tin #### Identity - Hole ID: MGRC021 - Project: Mt Garnet - Commodity: tin - Region: australia\_qld - Reported Region: australia\_qld - Ticker: KOB #### Geometry - Grade: 0.25 - Grade Unit: % - Intercept: 10 m - From: 69 m - To: 79 m - Hole Depth: 100 m - Intercept Depth: 69 m #### Classification - Deposit Type: other - Program: exploration - Sample Type: drill - Group ID: MGRC021:69-79 - Mining Method: underground #### Location - Easting: 280835 - Northing: 8061055 - Elevation: 629 m - Azimuth: 225 ° - Dip: -49 ° - Loc. Confidence: high - Loc. Source: document #### QA/QC - Laboratory: Intertek Minerals Townsville Laboratory and Intertek Genalysis Perth - QA/QC Disclosed: Yes - QP Signed: Yes - QA/QC Methods: standards, blanks, duplicates #### Compositing - Cutoff Grade: 0.1 - Cutoff Unit: % Sn - Dilution Disclosed: Yes - Max Dilution: 2 m #### Review - Needs Review: No - Interp. Status: scored - Historical: No #### Dates - Event date: 2026-10-13T00:00:00.000Z Reasoning: This intercept of 10m at 0.25% Sn is below the weak grade threshold for tin in an underground context, but contributes to the overall mineralization footprint at Stannex. - Positive factor: Moderate width of 10m - Positive factor: Part of a maiden drilling program at Stannex Prospect, indicating new discovery - Negative factor: Grade is below the weak threshold for tin in an underground context - Negative factor: True width not known #### Tags used in scoring **QA/QC Disclosed** Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Why it applies: qaqc\_disclosed is true **Compositing Transparent** Polarity: positive Definition: Cut-off grade and internal dilution rules are clearly stated for reported intervals. Why it applies: cutoff\_grade and internal dilution are both stated **Nearology Play** Polarity: neutral Definition: Value premise rests on proximity to a known deposit rather than own results. Why it applies: proximity is offered as the value premise: "21 initial broadly spaced drill holes were completed at the Stannex Prospect, approximately 1km northeast of the Gilmore" ### MGRC002 [Link to this fact](https://atlas-staging.minestarters.com/news/kob-thick-high-grade-tin-intersected-at-the-mt-garnet-project--9ef8b14b-4cc4-486b-92ee-9b0ec78fa39f#fact-drill-facts-17) Mt Garnet · tin #### Identity - Hole ID: MGRC002 - Project: Mt Garnet - Commodity: tin - Region: australia\_qld - Reported Region: australia\_qld - Ticker: KOB #### Geometry - Grade: 0.11 - Grade Unit: % - Intercept: 5 m - From: 114 m - To: 119 m - Hole Depth: 120 m - Intercept Depth: 114 m #### Classification - Deposit Type: other - Program: exploration - Sample Type: drill - Group ID: MGRC002:114-119 - Mining Method: underground #### Location - Easting: 281185 - Northing: 8060512 - Elevation: 619 m - Azimuth: 43 ° - Dip: -60 ° - Loc. Confidence: high - Loc. Source: document #### QA/QC - Laboratory: Intertek Minerals Townsville Laboratory and Intertek Genalysis Perth - QA/QC Disclosed: Yes - QP Signed: Yes - QA/QC Methods: standards, blanks, duplicates #### Compositing - Cutoff Grade: 0.1 - Cutoff Unit: % Sn - Dilution Disclosed: Yes - Max Dilution: 2 m #### Review - Needs Review: No - Interp. Status: scored - Historical: No #### Dates - Event date: 2026-10-13T00:00:00.000Z Reasoning: This intercept of 5m at 0.11% Sn is below the weak grade threshold for tin in an underground context, but contributes to the overall mineralization footprint at Stannex. - Positive factor: Part of a maiden drilling program at Stannex Prospect, indicating new discovery - Negative factor: Grade is below the weak threshold for tin in an underground context - Negative factor: True width not known #### Tags used in scoring **QA/QC Disclosed** Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Why it applies: qaqc\_disclosed is true **Compositing Transparent** Polarity: positive Definition: Cut-off grade and internal dilution rules are clearly stated for reported intervals. Why it applies: cutoff\_grade and internal dilution are both stated **Nearology Play** Polarity: neutral Definition: Value premise rests on proximity to a known deposit rather than own results. Why it applies: proximity is offered as the value premise: "21 initial broadly spaced drill holes were completed at the Stannex Prospect, approximately 1km northeast of the Gilmore" ### MGRC002 [Link to this fact](https://atlas-staging.minestarters.com/news/kob-thick-high-grade-tin-intersected-at-the-mt-garnet-project--9ef8b14b-4cc4-486b-92ee-9b0ec78fa39f#fact-drill-facts-18) Mt Garnet · tungsten #### Identity - Hole ID: MGRC002 - Project: Mt Garnet - Commodity: tungsten - Region: australia\_qld - Reported Region: australia\_qld - Ticker: KOB #### Geometry - Grade: 21 - Grade Unit: ppm - Intercept: 5 m - From: 114 m - To: 119 m - Hole Depth: 120 m - Intercept Depth: 114 m #### Classification - Deposit Type: other - Program: exploration - Sample Type: drill - Group ID: MGRC002:114-119 - Mining Method: underground #### Location - Easting: 281185 - Northing: 8060512 - Elevation: 619 m - Azimuth: 43 ° - Dip: -60 ° - Loc. Confidence: high - Loc. Source: document #### QA/QC - Laboratory: Intertek Minerals Townsville Laboratory and Intertek Genalysis Perth - QA/QC Disclosed: Yes - QP Signed: Yes - QA/QC Methods: standards, blanks, duplicates #### Compositing - Cutoff Grade: 0.1 - Cutoff Unit: % Sn - Dilution Disclosed: Yes - Max Dilution: 2 m #### Review - Needs Review: No - Interp. Status: scored - Historical: No #### Dates - Event date: 2026-10-13T00:00:00.000Z Reasoning: The tungsten grade of 21 ppm over 5m is very low and unlikely to be economic, but is noted as associated mineralization. - Positive factor: Associated mineralization in a new discovery - Negative factor: Very low tungsten grade - Negative factor: True width not known #### Tags used in scoring **QA/QC Disclosed** Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Why it applies: qaqc\_disclosed is true **Compositing Transparent** Polarity: positive Definition: Cut-off grade and internal dilution rules are clearly stated for reported intervals. Why it applies: cutoff\_grade and internal dilution are both stated **Nearology Play** Polarity: neutral Definition: Value premise rests on proximity to a known deposit rather than own results. Why it applies: proximity is offered as the value premise: "21 initial broadly spaced drill holes were completed at the Stannex Prospect, approximately 1km northeast of the Gilmore" ### MGRC002 [Link to this fact](https://atlas-staging.minestarters.com/news/kob-thick-high-grade-tin-intersected-at-the-mt-garnet-project--9ef8b14b-4cc4-486b-92ee-9b0ec78fa39f#fact-drill-facts-19) Mt Garnet · copper #### Identity - Hole ID: MGRC002 - Project: Mt Garnet - Commodity: copper - Region: australia\_qld - Reported Region: australia\_qld - Ticker: KOB #### Geometry - Grade: 0.01 - Grade Unit: % - Intercept: 5 m - From: 114 m - To: 119 m - Hole Depth: 120 m - Intercept Depth: 114 m #### Classification - Deposit Type: other - Program: exploration - Sample Type: drill - Group ID: MGRC002:114-119 - Mining Method: underground #### Location - Easting: 281185 - Northing: 8060512 - Elevation: 619 m - Azimuth: 43 ° - Dip: -60 ° - Loc. Confidence: high - Loc. Source: document #### QA/QC - Laboratory: Intertek Minerals Townsville Laboratory and Intertek Genalysis Perth - QA/QC Disclosed: Yes - QP Signed: Yes - QA/QC Methods: standards, blanks, duplicates #### Compositing - Cutoff Grade: 0.1 - Cutoff Unit: % Sn - Dilution Disclosed: Yes - Max Dilution: 2 m #### Review - Needs Review: No - Interp. Status: scored - Historical: No #### Dates - Event date: 2026-10-13T00:00:00.000Z Reasoning: The copper grade of 0.01% over 5m is a trace amount and not economically significant, but is noted as associated mineralization. - Positive factor: Associated mineralization in a new discovery - Negative factor: Trace copper grade - Negative factor: True width not known #### Tags used in scoring **QA/QC Disclosed** Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Why it applies: qaqc\_disclosed is true **Compositing Transparent** Polarity: positive Definition: Cut-off grade and internal dilution rules are clearly stated for reported intervals. Why it applies: cutoff\_grade and internal dilution are both stated **Nearology Play** Polarity: neutral Definition: Value premise rests on proximity to a known deposit rather than own results. Why it applies: proximity is offered as the value premise: "21 initial broadly spaced drill holes were completed at the Stannex Prospect, approximately 1km northeast of the Gilmore" ### MGRC002 [Link to this fact](https://atlas-staging.minestarters.com/news/kob-thick-high-grade-tin-intersected-at-the-mt-garnet-project--9ef8b14b-4cc4-486b-92ee-9b0ec78fa39f#fact-drill-facts-20) Mt Garnet · zinc #### Identity - Hole ID: MGRC002 - Project: Mt Garnet - Commodity: zinc - Region: australia\_qld - Reported Region: australia\_qld - Ticker: KOB #### Geometry - Grade: 0.05 - Grade Unit: % - Intercept: 5 m - From: 114 m - To: 119 m - Hole Depth: 120 m - Intercept Depth: 114 m #### Classification - Deposit Type: other - Program: exploration - Sample Type: drill - Group ID: MGRC002:114-119 - Mining Method: underground #### Location - Easting: 281185 - Northing: 8060512 - Elevation: 619 m - Azimuth: 43 ° - Dip: -60 ° - Loc. Confidence: high - Loc. Source: document #### QA/QC - Laboratory: Intertek Minerals Townsville Laboratory and Intertek Genalysis Perth - QA/QC Disclosed: Yes - QP Signed: Yes - QA/QC Methods: standards, blanks, duplicates #### Compositing - Cutoff Grade: 0.1 - Cutoff Unit: % Sn - Dilution Disclosed: Yes - Max Dilution: 2 m #### Review - Needs Review: No - Interp. Status: scored - Historical: No #### Dates - Event date: 2026-10-13T00:00:00.000Z Reasoning: The zinc grade of 0.05% over 5m is a trace amount and not economically significant, but is noted as associated mineralization. - Positive factor: Associated mineralization in a new discovery - Negative factor: Trace zinc grade - Negative factor: True width not known #### Tags used in scoring **QA/QC Disclosed** Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Why it applies: qaqc\_disclosed is true **Compositing Transparent** Polarity: positive Definition: Cut-off grade and internal dilution rules are clearly stated for reported intervals. Why it applies: cutoff\_grade and internal dilution are both stated **Nearology Play** Polarity: neutral Definition: Value premise rests on proximity to a known deposit rather than own results. Why it applies: proximity is offered as the value premise: "21 initial broadly spaced drill holes were completed at the Stannex Prospect, approximately 1km northeast of the Gilmore" ### MGRC002 [Link to this fact](https://atlas-staging.minestarters.com/news/kob-thick-high-grade-tin-intersected-at-the-mt-garnet-project--9ef8b14b-4cc4-486b-92ee-9b0ec78fa39f#fact-drill-facts-21) Mt Garnet · silver #### Identity - Hole ID: MGRC002 - Project: Mt Garnet - Commodity: silver - Region: australia\_qld - Reported Region: australia\_qld - Ticker: KOB #### Geometry - Grade: 5 - Grade Unit: g/t - Intercept: 5 m - From: 114 m - To: 119 m - Hole Depth: 120 m - Intercept Depth: 114 m #### Classification - Deposit Type: other - Program: exploration - Sample Type: drill - Group ID: MGRC002:114-119 - Mining Method: underground #### Location - Easting: 281185 - Northing: 8060512 - Elevation: 619 m - Azimuth: 43 ° - Dip: -60 ° - Loc. Confidence: high - Loc. Source: document #### QA/QC - Laboratory: Intertek Minerals Townsville Laboratory and Intertek Genalysis Perth - QA/QC Disclosed: Yes - QP Signed: Yes - QA/QC Methods: standards, blanks, duplicates #### Compositing - Cutoff Grade: 0.1 - Cutoff Unit: % Sn - Dilution Disclosed: Yes - Max Dilution: 2 m #### Review - Needs Review: No - Interp. Status: scored - Historical: No #### Dates - Event date: 2026-10-13T00:00:00.000Z Reasoning: The silver grade of 5 g/t over 5m is a trace amount and not economically significant, and the high detection limit for silver reduces confidence in the reported value. - Positive factor: Associated mineralization in a new discovery - Negative factor: Trace silver grade - Negative factor: True width not known - Negative factor: High detection limit for silver \(10 g/t\) reduces confidence in reported values #### Tags used in scoring **QA/QC Disclosed** Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Why it applies: qaqc\_disclosed is true **Compositing Transparent** Polarity: positive Definition: Cut-off grade and internal dilution rules are clearly stated for reported intervals. Why it applies: cutoff\_grade and internal dilution are both stated **Nearology Play** Polarity: neutral Definition: Value premise rests on proximity to a known deposit rather than own results. Why it applies: proximity is offered as the value premise: "21 initial broadly spaced drill holes were completed at the Stannex Prospect, approximately 1km northeast of the Gilmore" ### MGRC002 [Link to this fact](https://atlas-staging.minestarters.com/news/kob-thick-high-grade-tin-intersected-at-the-mt-garnet-project--9ef8b14b-4cc4-486b-92ee-9b0ec78fa39f#fact-drill-facts-22) Mt Garnet · indium #### Identity - Hole ID: MGRC002 - Project: Mt Garnet - Commodity: indium - Region: australia\_qld - Reported Region: australia\_qld - Ticker: KOB #### Geometry - Grade: 2.3 - Grade Unit: g/t - Intercept: 5 m - From: 114 m - To: 119 m - Hole Depth: 120 m - Intercept Depth: 114 m #### Classification - Deposit Type: other - Program: exploration - Sample Type: drill - Group ID: MGRC002:114-119 - Mining Method: underground #### Location - Easting: 281185 - Northing: 8060512 - Elevation: 619 m - Azimuth: 43 ° - Dip: -60 ° - Loc. Confidence: high - Loc. Source: document #### QA/QC - Laboratory: Intertek Minerals Townsville Laboratory and Intertek Genalysis Perth - QA/QC Disclosed: Yes - QP Signed: Yes - QA/QC Methods: standards, blanks, duplicates #### Compositing - Cutoff Grade: 0.1 - Cutoff Unit: % Sn - Dilution Disclosed: Yes - Max Dilution: 2 m #### Review - Needs Review: No - Interp. Status: scored - Historical: No #### Dates - Event date: 2026-10-13T00:00:00.000Z Reasoning: The indium grade of 2.3 g/t over 5m is a trace amount and not economically significant, but is noted as associated mineralization. - Positive factor: Associated mineralization in a new discovery - Negative factor: Trace indium grade - Negative factor: True width not known #### Tags used in scoring **QA/QC Disclosed** Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Why it applies: qaqc\_disclosed is true **Compositing Transparent** Polarity: positive Definition: Cut-off grade and internal dilution rules are clearly stated for reported intervals. Why it applies: cutoff\_grade and internal dilution are both stated **Nearology Play** Polarity: neutral Definition: Value premise rests on proximity to a known deposit rather than own results. Why it applies: proximity is offered as the value premise: "21 initial broadly spaced drill holes were completed at the Stannex Prospect, approximately 1km northeast of the Gilmore" ### MGRC003 [Link to this fact](https://atlas-staging.minestarters.com/news/kob-thick-high-grade-tin-intersected-at-the-mt-garnet-project--9ef8b14b-4cc4-486b-92ee-9b0ec78fa39f#fact-drill-facts-23) Mt Garnet · tin #### Identity - Hole ID: MGRC003 - Project: Mt Garnet - Commodity: tin - Region: australia\_qld - Reported Region: australia\_qld - Ticker: KOB #### Geometry - Grade: 0.33 - Grade Unit: % - Intercept: 2 m - From: 42 m - To: 44 m - Hole Depth: 120 m - Intercept Depth: 42 m #### Classification - Deposit Type: other - Program: exploration - Sample Type: drill - Group ID: MGRC003:42-44 - Mining Method: underground #### Location - Easting: 281161 - Northing: 8060584 - Elevation: 618 m - Azimuth: 46 ° - Dip: -60 ° - Loc. Confidence: high - Loc. Source: document #### QA/QC - Laboratory: Intertek Minerals Townsville Laboratory and Intertek Genalysis Perth - QA/QC Disclosed: Yes - QP Signed: Yes - QA/QC Methods: standards, blanks, duplicates #### Compositing - Cutoff Grade: 0.1 - Cutoff Unit: % Sn - Dilution Disclosed: Yes - Max Dilution: 2 m #### Review - Needs Review: No - Interp. Status: scored - Historical: No #### Dates - Event date: 2026-10-13T00:00:00.000Z Reasoning: This intercept of 2m at 0.33% Sn is below the weak grade threshold for tin in an underground context, but contributes to the overall mineralization footprint at Stannex. - Positive factor: Part of a maiden drilling program at Stannex Prospect, indicating new discovery - Negative factor: Grade is below the weak threshold for tin in an underground context - Negative factor: Narrow width of 2m - Negative factor: True width not known #### Tags used in scoring **QA/QC Disclosed** Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Why it applies: qaqc\_disclosed is true **Compositing Transparent** Polarity: positive Definition: Cut-off grade and internal dilution rules are clearly stated for reported intervals. Why it applies: cutoff\_grade and internal dilution are both stated **Nearology Play** Polarity: neutral Definition: Value premise rests on proximity to a known deposit rather than own results. Why it applies: proximity is offered as the value premise: "21 initial broadly spaced drill holes were completed at the Stannex Prospect, approximately 1km northeast of the Gilmore" ### MGRC003 [Link to this fact](https://atlas-staging.minestarters.com/news/kob-thick-high-grade-tin-intersected-at-the-mt-garnet-project--9ef8b14b-4cc4-486b-92ee-9b0ec78fa39f#fact-drill-facts-24) Mt Garnet · tungsten #### Identity - Hole ID: MGRC003 - Project: Mt Garnet - Commodity: tungsten - Region: australia\_qld - Reported Region: australia\_qld - Ticker: KOB #### Geometry - Grade: 18 - Grade Unit: ppm - Intercept: 2 m - From: 42 m - To: 44 m - Hole Depth: 120 m - Intercept Depth: 42 m #### Classification - Deposit Type: other - Program: exploration - Sample Type: drill - Group ID: MGRC003:42-44 - Mining Method: underground #### Location - Easting: 281161 - Northing: 8060584 - Elevation: 618 m - Azimuth: 46 ° - Dip: -60 ° - Loc. Confidence: high - Loc. Source: document #### QA/QC - Laboratory: Intertek Minerals Townsville Laboratory and Intertek Genalysis Perth - QA/QC Disclosed: Yes - QP Signed: Yes - QA/QC Methods: standards, blanks, duplicates #### Compositing - Cutoff Grade: 0.1 - Cutoff Unit: % Sn - Dilution Disclosed: Yes - Max Dilution: 2 m #### Review - Needs Review: No - Interp. Status: scored - Historical: No #### Dates - Event date: 2026-10-13T00:00:00.000Z Reasoning: The tungsten grade of 18 ppm over 2m is very low and unlikely to be economic, but is noted as associated mineralization. - Positive factor: Associated mineralization in a new discovery - Negative factor: Very low tungsten grade - Negative factor: True width not known #### Tags used in scoring **QA/QC Disclosed** Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Why it applies: qaqc\_disclosed is true **Compositing Transparent** Polarity: positive Definition: Cut-off grade and internal dilution rules are clearly stated for reported intervals. Why it applies: cutoff\_grade and internal dilution are both stated **Nearology Play** Polarity: neutral Definition: Value premise rests on proximity to a known deposit rather than own results. Why it applies: proximity is offered as the value premise: "21 initial broadly spaced drill holes were completed at the Stannex Prospect, approximately 1km northeast of the Gilmore" ### MGRC003 [Link to this fact](https://atlas-staging.minestarters.com/news/kob-thick-high-grade-tin-intersected-at-the-mt-garnet-project--9ef8b14b-4cc4-486b-92ee-9b0ec78fa39f#fact-drill-facts-25) Mt Garnet · copper #### Identity - Hole ID: MGRC003 - Project: Mt Garnet - Commodity: copper - Region: australia\_qld - Reported Region: australia\_qld - Ticker: KOB #### Geometry - Grade: 0.05 - Grade Unit: % - Intercept: 2 m - From: 42 m - To: 44 m - Hole Depth: 120 m - Intercept Depth: 42 m #### Classification - Deposit Type: other - Program: exploration - Sample Type: drill - Group ID: MGRC003:42-44 - Mining Method: underground #### Location - Easting: 281161 - Northing: 8060584 - Elevation: 618 m - Azimuth: 46 ° - Dip: -60 ° - Loc. Confidence: high - Loc. Source: document #### QA/QC - Laboratory: Intertek Minerals Townsville Laboratory and Intertek Genalysis Perth - QA/QC Disclosed: Yes - QP Signed: Yes - QA/QC Methods: standards, blanks, duplicates #### Compositing - Cutoff Grade: 0.1 - Cutoff Unit: % Sn - Dilution Disclosed: Yes - Max Dilution: 2 m #### Review - Needs Review: No - Interp. Status: scored - Historical: No #### Dates - Event date: 2026-10-13T00:00:00.000Z Reasoning: The copper grade of 0.05% over 2m is a trace amount and not economically significant, but is noted as associated mineralization. - Positive factor: Associated mineralization in a new discovery - Negative factor: Trace copper grade - Negative factor: True width not known #### Tags used in scoring **QA/QC Disclosed** Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Why it applies: qaqc\_disclosed is true **Compositing Transparent** Polarity: positive Definition: Cut-off grade and internal dilution rules are clearly stated for reported intervals. Why it applies: cutoff\_grade and internal dilution are both stated **Nearology Play** Polarity: neutral Definition: Value premise rests on proximity to a known deposit rather than own results. Why it applies: proximity is offered as the value premise: "21 initial broadly spaced drill holes were completed at the Stannex Prospect, approximately 1km northeast of the Gilmore" ### MGRC003 [Link to this fact](https://atlas-staging.minestarters.com/news/kob-thick-high-grade-tin-intersected-at-the-mt-garnet-project--9ef8b14b-4cc4-486b-92ee-9b0ec78fa39f#fact-drill-facts-26) Mt Garnet · zinc #### Identity - Hole ID: MGRC003 - Project: Mt Garnet - Commodity: zinc - Region: australia\_qld - Reported Region: australia\_qld - Ticker: KOB #### Geometry - Grade: 0.02 - Grade Unit: % - Intercept: 2 m - From: 42 m - To: 44 m - Hole Depth: 120 m - Intercept Depth: 42 m #### Classification - Deposit Type: other - Program: exploration - Sample Type: drill - Group ID: MGRC003:42-44 - Mining Method: underground #### Location - Easting: 281161 - Northing: 8060584 - Elevation: 618 m - Azimuth: 46 ° - Dip: -60 ° - Loc. Confidence: high - Loc. Source: document #### QA/QC - Laboratory: Intertek Minerals Townsville Laboratory and Intertek Genalysis Perth - QA/QC Disclosed: Yes - QP Signed: Yes - QA/QC Methods: standards, blanks, duplicates #### Compositing - Cutoff Grade: 0.1 - Cutoff Unit: % Sn - Dilution Disclosed: Yes - Max Dilution: 2 m #### Review - Needs Review: No - Interp. Status: scored - Historical: No #### Dates - Event date: 2026-10-13T00:00:00.000Z Reasoning: The zinc grade of 0.02% over 2m is a trace amount and not economically significant, but is noted as associated mineralization. - Positive factor: Associated mineralization in a new discovery - Negative factor: Trace zinc grade - Negative factor: True width not known #### Tags used in scoring **QA/QC Disclosed** Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Why it applies: qaqc\_disclosed is true **Compositing Transparent** Polarity: positive Definition: Cut-off grade and internal dilution rules are clearly stated for reported intervals. Why it applies: cutoff\_grade and internal dilution are both stated **Nearology Play** Polarity: neutral Definition: Value premise rests on proximity to a known deposit rather than own results. Why it applies: proximity is offered as the value premise: "21 initial broadly spaced drill holes were completed at the Stannex Prospect, approximately 1km northeast of the Gilmore" ### MGRC003 [Link to this fact](https://atlas-staging.minestarters.com/news/kob-thick-high-grade-tin-intersected-at-the-mt-garnet-project--9ef8b14b-4cc4-486b-92ee-9b0ec78fa39f#fact-drill-facts-27) Mt Garnet · silver #### Identity - Hole ID: MGRC003 - Project: Mt Garnet - Commodity: silver - Region: australia\_qld - Reported Region: australia\_qld - Ticker: KOB #### Geometry - Grade: 5 - Grade Unit: g/t - Intercept: 2 m - From: 42 m - To: 44 m - Hole Depth: 120 m - Intercept Depth: 42 m #### Classification - Deposit Type: other - Program: exploration - Sample Type: drill - Group ID: MGRC003:42-44 - Mining Method: underground #### Location - Easting: 281161 - Northing: 8060584 - Elevation: 618 m - Azimuth: 46 ° - Dip: -60 ° - Loc. Confidence: high - Loc. Source: document #### QA/QC - Laboratory: Intertek Minerals Townsville Laboratory and Intertek Genalysis Perth - QA/QC Disclosed: Yes - QP Signed: Yes - QA/QC Methods: standards, blanks, duplicates #### Compositing - Cutoff Grade: 0.1 - Cutoff Unit: % Sn - Dilution Disclosed: Yes - Max Dilution: 2 m #### Review - Needs Review: No - Interp. Status: scored - Historical: No #### Dates - Event date: 2026-10-13T00:00:00.000Z Reasoning: The silver grade of 5 g/t over 2m is a trace amount and not economically significant, and the high detection limit for silver reduces confidence in the reported value. - Positive factor: Associated mineralization in a new discovery - Negative factor: Trace silver grade - Negative factor: True width not known - Negative factor: High detection limit for silver \(10 g/t\) reduces confidence in reported values #### Tags used in scoring **QA/QC Disclosed** Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Why it applies: qaqc\_disclosed is true **Compositing Transparent** Polarity: positive Definition: Cut-off grade and internal dilution rules are clearly stated for reported intervals. Why it applies: cutoff\_grade and internal dilution are both stated **Nearology Play** Polarity: neutral Definition: Value premise rests on proximity to a known deposit rather than own results. Why it applies: proximity is offered as the value premise: "21 initial broadly spaced drill holes were completed at the Stannex Prospect, approximately 1km northeast of the Gilmore" ### MGRC003 [Link to this fact](https://atlas-staging.minestarters.com/news/kob-thick-high-grade-tin-intersected-at-the-mt-garnet-project--9ef8b14b-4cc4-486b-92ee-9b0ec78fa39f#fact-drill-facts-28) Mt Garnet · indium #### Identity - Hole ID: MGRC003 - Project: Mt Garnet - Commodity: indium - Region: australia\_qld - Reported Region: australia\_qld - Ticker: KOB #### Geometry - Grade: 1.8 - Grade Unit: g/t - Intercept: 2 m - From: 42 m - To: 44 m - Hole Depth: 120 m - Intercept Depth: 42 m #### Classification - Deposit Type: other - Program: exploration - Sample Type: drill - Group ID: MGRC003:42-44 - Mining Method: underground #### Location - Easting: 281161 - Northing: 8060584 - Elevation: 618 m - Azimuth: 46 ° - Dip: -60 ° - Loc. Confidence: high - Loc. Source: document #### QA/QC - Laboratory: Intertek Minerals Townsville Laboratory and Intertek Genalysis Perth - QA/QC Disclosed: Yes - QP Signed: Yes - QA/QC Methods: standards, blanks, duplicates #### Compositing - Cutoff Grade: 0.1 - Cutoff Unit: % Sn - Dilution Disclosed: Yes - Max Dilution: 2 m #### Review - Needs Review: No - Interp. Status: scored - Historical: No #### Dates - Event date: 2026-10-13T00:00:00.000Z Reasoning: The indium grade of 1.8 g/t over 2m is a trace amount and not economically significant, but is noted as associated mineralization. - Positive factor: Associated mineralization in a new discovery - Negative factor: Trace indium grade - Negative factor: True width not known #### Tags used in scoring **QA/QC Disclosed** Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Why it applies: qaqc\_disclosed is true **Compositing Transparent** Polarity: positive Definition: Cut-off grade and internal dilution rules are clearly stated for reported intervals. Why it applies: cutoff\_grade and internal dilution are both stated **Nearology Play** Polarity: neutral Definition: Value premise rests on proximity to a known deposit rather than own results. Why it applies: proximity is offered as the value premise: "21 initial broadly spaced drill holes were completed at the Stannex Prospect, approximately 1km northeast of the Gilmore" ### MGRC003 [Link to this fact](https://atlas-staging.minestarters.com/news/kob-thick-high-grade-tin-intersected-at-the-mt-garnet-project--9ef8b14b-4cc4-486b-92ee-9b0ec78fa39f#fact-drill-facts-29) Mt Garnet · tin #### Identity - Hole ID: MGRC003 - Project: Mt Garnet - Commodity: tin - Region: australia\_qld - Reported Region: australia\_qld - Ticker: KOB #### Geometry - Grade: 0.45 - Grade Unit: % - Intercept: 1 m - From: 42 m - To: 43 m - Hole Depth: 120 m - Intercept Depth: 42 m #### Classification - Deposit Type: other - Program: exploration - Sample Type: drill - Group ID: MGRC003:42-43 - Mining Method: underground #### Location - Easting: 281161 - Northing: 8060584 - Elevation: 618 m - Azimuth: 46 ° - Dip: -60 ° - Loc. Confidence: high - Loc. Source: document #### QA/QC - Laboratory: Intertek Minerals Townsville Laboratory and Intertek Genalysis Perth - QA/QC Disclosed: Yes - QP Signed: Yes - QA/QC Methods: standards, blanks, duplicates #### Compositing - Cutoff Grade: 0.4 - Cutoff Unit: % Sn - Dilution Disclosed: Yes - Max Dilution: 2 m #### Review - Needs Review: No - Interp. Status: scored - Historical: No #### Dates - Event date: 2026-10-13T00:00:00.000Z Reasoning: This included intercept of 1m at 0.45% Sn is below the weak grade threshold for tin in an underground context, but contributes to the overall mineralization footprint at Stannex. - Positive factor: Part of a maiden drilling program at Stannex Prospect, indicating new discovery - Negative factor: Grade is below the weak threshold for tin in an underground context - Negative factor: Narrow width of 1m - Negative factor: True width not known #### Tags used in scoring **QA/QC Disclosed** Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Why it applies: qaqc\_disclosed is true **Compositing Transparent** Polarity: positive Definition: Cut-off grade and internal dilution rules are clearly stated for reported intervals. Why it applies: cutoff\_grade and internal dilution are both stated **Nearology Play** Polarity: neutral Definition: Value premise rests on proximity to a known deposit rather than own results. Why it applies: proximity is offered as the value premise: "21 initial broadly spaced drill holes were completed at the Stannex Prospect, approximately 1km northeast of the Gilmore" ### MGRC003 [Link to this fact](https://atlas-staging.minestarters.com/news/kob-thick-high-grade-tin-intersected-at-the-mt-garnet-project--9ef8b14b-4cc4-486b-92ee-9b0ec78fa39f#fact-drill-facts-30) Mt Garnet · tungsten #### Identity - Hole ID: MGRC003 - Project: Mt Garnet - Commodity: tungsten - Region: australia\_qld - Reported Region: australia\_qld - Ticker: KOB #### Geometry - Grade: 16 - Grade Unit: ppm - Intercept: 1 m - From: 42 m - To: 43 m - Hole Depth: 120 m - Intercept Depth: 42 m #### Classification - Deposit Type: other - Program: exploration - Sample Type: drill - Group ID: MGRC003:42-43 - Mining Method: underground #### Location - Easting: 281161 - Northing: 8060584 - Elevation: 618 m - Azimuth: 46 ° - Dip: -60 ° - Loc. Confidence: high - Loc. Source: document #### QA/QC - Laboratory: Intertek Minerals Townsville Laboratory and Intertek Genalysis Perth - QA/QC Disclosed: Yes - QP Signed: Yes - QA/QC Methods: standards, blanks, duplicates #### Compositing - Cutoff Grade: 0.4 - Cutoff Unit: % Sn - Dilution Disclosed: Yes - Max Dilution: 2 m #### Review - Needs Review: No - Interp. Status: scored - Historical: No #### Dates - Event date: 2026-10-13T00:00:00.000Z Reasoning: The tungsten grade of 16 ppm over 1m is very low and unlikely to be economic, but is noted as associated mineralization. - Positive factor: Associated mineralization in a new discovery - Negative factor: Very low tungsten grade - Negative factor: True width not known #### Tags used in scoring **QA/QC Disclosed** Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Why it applies: qaqc\_disclosed is true **Compositing Transparent** Polarity: positive Definition: Cut-off grade and internal dilution rules are clearly stated for reported intervals. Why it applies: cutoff\_grade and internal dilution are both stated **Nearology Play** Polarity: neutral Definition: Value premise rests on proximity to a known deposit rather than own results. Why it applies: proximity is offered as the value premise: "21 initial broadly spaced drill holes were completed at the Stannex Prospect, approximately 1km northeast of the Gilmore" ### MGRC003 [Link to this fact](https://atlas-staging.minestarters.com/news/kob-thick-high-grade-tin-intersected-at-the-mt-garnet-project--9ef8b14b-4cc4-486b-92ee-9b0ec78fa39f#fact-drill-facts-31) Mt Garnet · copper #### Identity - Hole ID: MGRC003 - Project: Mt Garnet - Commodity: copper - Region: australia\_qld - Reported Region: australia\_qld - Ticker: KOB #### Geometry - Grade: 0.05 - Grade Unit: % - Intercept: 1 m - From: 42 m - To: 43 m - Hole Depth: 120 m - Intercept Depth: 42 m #### Classification - Deposit Type: other - Program: exploration - Sample Type: drill - Group ID: MGRC003:42-43 - Mining Method: underground #### Location - Easting: 281161 - Northing: 8060584 - Elevation: 618 m - Azimuth: 46 ° - Dip: -60 ° - Loc. Confidence: high - Loc. Source: document #### QA/QC - Laboratory: Intertek Minerals Townsville Laboratory and Intertek Genalysis Perth - QA/QC Disclosed: Yes - QP Signed: Yes - QA/QC Methods: standards, blanks, duplicates #### Compositing - Cutoff Grade: 0.4 - Cutoff Unit: % Sn - Dilution Disclosed: Yes - Max Dilution: 2 m #### Review - Needs Review: No - Interp. Status: scored - Historical: No #### Dates - Event date: 2026-10-13T00:00:00.000Z Reasoning: The copper grade of 0.05% over 1m is a trace amount and not economically significant, but is noted as associated mineralization. - Positive factor: Associated mineralization in a new discovery - Negative factor: Trace copper grade - Negative factor: True width not known #### Tags used in scoring **QA/QC Disclosed** Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Why it applies: qaqc\_disclosed is true **Compositing Transparent** Polarity: positive Definition: Cut-off grade and internal dilution rules are clearly stated for reported intervals. Why it applies: cutoff\_grade and internal dilution are both stated **Nearology Play** Polarity: neutral Definition: Value premise rests on proximity to a known deposit rather than own results. Why it applies: proximity is offered as the value premise: "21 initial broadly spaced drill holes were completed at the Stannex Prospect, approximately 1km northeast of the Gilmore" ### MGRC003 [Link to this fact](https://atlas-staging.minestarters.com/news/kob-thick-high-grade-tin-intersected-at-the-mt-garnet-project--9ef8b14b-4cc4-486b-92ee-9b0ec78fa39f#fact-drill-facts-32) Mt Garnet · zinc #### Identity - Hole ID: MGRC003 - Project: Mt Garnet - Commodity: zinc - Region: australia\_qld - Reported Region: australia\_qld - Ticker: KOB #### Geometry - Grade: 0.03 - Grade Unit: % - Intercept: 1 m - From: 42 m - To: 43 m - Hole Depth: 120 m - Intercept Depth: 42 m #### Classification - Deposit Type: other - Program: exploration - Sample Type: drill - Group ID: MGRC003:42-43 - Mining Method: underground #### Location - Easting: 281161 - Northing: 8060584 - Elevation: 618 m - Azimuth: 46 ° - Dip: -60 ° - Loc. Confidence: high - Loc. Source: document #### QA/QC - Laboratory: Intertek Minerals Townsville Laboratory and Intertek Genalysis Perth - QA/QC Disclosed: Yes - QP Signed: Yes - QA/QC Methods: standards, blanks, duplicates #### Compositing - Cutoff Grade: 0.4 - Cutoff Unit: % Sn - Dilution Disclosed: Yes - Max Dilution: 2 m #### Review - Needs Review: No - Interp. Status: scored - Historical: No #### Dates - Event date: 2026-10-13T00:00:00.000Z Reasoning: The zinc grade of 0.03% over 1m is a trace amount and not economically significant, but is noted as associated mineralization. - Positive factor: Associated mineralization in a new discovery - Negative factor: Trace zinc grade - Negative factor: True width not known #### Tags used in scoring **QA/QC Disclosed** Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Why it applies: qaqc\_disclosed is true **Compositing Transparent** Polarity: positive Definition: Cut-off grade and internal dilution rules are clearly stated for reported intervals. Why it applies: cutoff\_grade and internal dilution are both stated **Nearology Play** Polarity: neutral Definition: Value premise rests on proximity to a known deposit rather than own results. Why it applies: proximity is offered as the value premise: "21 initial broadly spaced drill holes were completed at the Stannex Prospect, approximately 1km northeast of the Gilmore" ### MGRC003 [Link to this fact](https://atlas-staging.minestarters.com/news/kob-thick-high-grade-tin-intersected-at-the-mt-garnet-project--9ef8b14b-4cc4-486b-92ee-9b0ec78fa39f#fact-drill-facts-33) Mt Garnet · silver #### Identity - Hole ID: MGRC003 - Project: Mt Garnet - Commodity: silver - Region: australia\_qld - Reported Region: australia\_qld - Ticker: KOB #### Geometry - Grade: 5 - Grade Unit: g/t - Intercept: 1 m - From: 42 m - To: 43 m - Hole Depth: 120 m - Intercept Depth: 42 m #### Classification - Deposit Type: other - Program: exploration - Sample Type: drill - Group ID: MGRC003:42-43 - Mining Method: underground #### Location - Easting: 281161 - Northing: 8060584 - Elevation: 618 m - Azimuth: 46 ° - Dip: -60 ° - Loc. Confidence: high - Loc. Source: document #### QA/QC - Laboratory: Intertek Minerals Townsville Laboratory and Intertek Genalysis Perth - QA/QC Disclosed: Yes - QP Signed: Yes - QA/QC Methods: standards, blanks, duplicates #### Compositing - Cutoff Grade: 0.4 - Cutoff Unit: % Sn - Dilution Disclosed: Yes - Max Dilution: 2 m #### Review - Needs Review: No - Interp. Status: scored - Historical: No #### Dates - Event date: 2026-10-13T00:00:00.000Z Reasoning: The silver grade of 5 g/t over 1m is a trace amount and not economically significant, and the high detection limit for silver reduces confidence in the reported value. - Positive factor: Associated mineralization in a new discovery - Negative factor: Trace silver grade - Negative factor: True width not known - Negative factor: High detection limit for silver \(10 g/t\) reduces confidence in reported values #### Tags used in scoring **QA/QC Disclosed** Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Why it applies: qaqc\_disclosed is true **Compositing Transparent** Polarity: positive Definition: Cut-off grade and internal dilution rules are clearly stated for reported intervals. Why it applies: cutoff\_grade and internal dilution are both stated **Nearology Play** Polarity: neutral Definition: Value premise rests on proximity to a known deposit rather than own results. Why it applies: proximity is offered as the value premise: "21 initial broadly spaced drill holes were completed at the Stannex Prospect, approximately 1km northeast of the Gilmore" ### MGRC003 [Link to this fact](https://atlas-staging.minestarters.com/news/kob-thick-high-grade-tin-intersected-at-the-mt-garnet-project--9ef8b14b-4cc4-486b-92ee-9b0ec78fa39f#fact-drill-facts-34) Mt Garnet · indium #### Identity - Hole ID: MGRC003 - Project: Mt Garnet - Commodity: indium - Region: australia\_qld - Reported Region: australia\_qld - Ticker: KOB #### Geometry - Grade: 1.7 - Grade Unit: g/t - Intercept: 1 m - From: 42 m - To: 43 m - Hole Depth: 120 m - Intercept Depth: 42 m #### Classification - Deposit Type: other - Program: exploration - Sample Type: drill - Group ID: MGRC003:42-43 - Mining Method: underground #### Location - Easting: 281161 - Northing: 8060584 - Elevation: 618 m - Azimuth: 46 ° - Dip: -60 ° - Loc. Confidence: high - Loc. Source: document #### QA/QC - Laboratory: Intertek Minerals Townsville Laboratory and Intertek Genalysis Perth - QA/QC Disclosed: Yes - QP Signed: Yes - QA/QC Methods: standards, blanks, duplicates #### Compositing - Cutoff Grade: 0.4 - Cutoff Unit: % Sn - Dilution Disclosed: Yes - Max Dilution: 2 m #### Review - Needs Review: No - Interp. Status: scored - Historical: No #### Dates - Event date: 2026-10-13T00:00:00.000Z Reasoning: The indium grade of 1.7 g/t over 1m is a trace amount and not economically significant, but is noted as associated mineralization. - Positive factor: Associated mineralization in a new discovery - Negative factor: Trace indium grade - Negative factor: True width not known #### Tags used in scoring **QA/QC Disclosed** Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Why it applies: qaqc\_disclosed is true **Compositing Transparent** Polarity: positive Definition: Cut-off grade and internal dilution rules are clearly stated for reported intervals. Why it applies: cutoff\_grade and internal dilution are both stated **Nearology Play** Polarity: neutral Definition: Value premise rests on proximity to a known deposit rather than own results. Why it applies: proximity is offered as the value premise: "21 initial broadly spaced drill holes were completed at the Stannex Prospect, approximately 1km northeast of the Gilmore" ### MGRC005 [Link to this fact](https://atlas-staging.minestarters.com/news/kob-thick-high-grade-tin-intersected-at-the-mt-garnet-project--9ef8b14b-4cc4-486b-92ee-9b0ec78fa39f#fact-drill-facts-35) Mt Garnet · tin #### Identity - Hole ID: MGRC005 - Project: Mt Garnet - Commodity: tin - Region: australia\_qld - Reported Region: australia\_qld - Ticker: KOB #### Geometry - Grade: 0.4 - Grade Unit: % - Intercept: 1 m - From: 8 m - To: 9 m - Hole Depth: 80 m - Intercept Depth: 8 m #### Classification - Deposit Type: other - Program: exploration - Sample Type: drill - Group ID: MGRC005:8-9 - Mining Method: underground #### Location - Easting: 281365 - Northing: 8060448 - Elevation: 624 m - Azimuth: 47 ° - Dip: -60 ° - Loc. Confidence: high - Loc. Source: document #### QA/QC - Laboratory: Intertek Minerals Townsville Laboratory and Intertek Genalysis Perth - QA/QC Disclosed: Yes - QP Signed: Yes - QA/QC Methods: standards, blanks, duplicates #### Compositing - Cutoff Grade: 0.1 - Cutoff Unit: % Sn - Dilution Disclosed: Yes - Max Dilution: 2 m #### Review - Needs Review: No - Interp. Status: scored - Historical: No #### Dates - Event date: 2026-10-13T00:00:00.000Z Reasoning: This intercept of 1m at 0.40% Sn is below the weak grade threshold for tin in an underground context, but contributes to the overall mineralization footprint at Stannex. - Positive factor: Part of a maiden drilling program at Stannex Prospect, indicating new discovery - Negative factor: Grade is below the weak threshold for tin in an underground context - Negative factor: Narrow width of 1m - Negative factor: True width not known #### Tags used in scoring **QA/QC Disclosed** Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Why it applies: qaqc\_disclosed is true **Compositing Transparent** Polarity: positive Definition: Cut-off grade and internal dilution rules are clearly stated for reported intervals. Why it applies: cutoff\_grade and internal dilution are both stated **Nearology Play** Polarity: neutral Definition: Value premise rests on proximity to a known deposit rather than own results. Why it applies: proximity is offered as the value premise: "21 initial broadly spaced drill holes were completed at the Stannex Prospect, approximately 1km northeast of the Gilmore" ### MGRC005 [Link to this fact](https://atlas-staging.minestarters.com/news/kob-thick-high-grade-tin-intersected-at-the-mt-garnet-project--9ef8b14b-4cc4-486b-92ee-9b0ec78fa39f#fact-drill-facts-36) Mt Garnet · tungsten #### Identity - Hole ID: MGRC005 - Project: Mt Garnet - Commodity: tungsten - Region: australia\_qld - Reported Region: australia\_qld - Ticker: KOB #### Geometry - Grade: 24 - Grade Unit: ppm - Intercept: 1 m - From: 8 m - To: 9 m - Hole Depth: 80 m - Intercept Depth: 8 m #### Classification - Deposit Type: other - Program: exploration - Sample Type: drill - Group ID: MGRC005:8-9 - Mining Method: underground #### Location - Easting: 281365 - Northing: 8060448 - Elevation: 624 m - Azimuth: 47 ° - Dip: -60 ° - Loc. Confidence: high - Loc. Source: document #### QA/QC - Laboratory: Intertek Minerals Townsville Laboratory and Intertek Genalysis Perth - QA/QC Disclosed: Yes - QP Signed: Yes - QA/QC Methods: standards, blanks, duplicates #### Compositing - Cutoff Grade: 0.1 - Cutoff Unit: % Sn - Dilution Disclosed: Yes - Max Dilution: 2 m #### Review - Needs Review: No - Interp. Status: scored - Historical: No #### Dates - Event date: 2026-10-13T00:00:00.000Z Reasoning: The tungsten grade of 24 ppm over 1m is very low and unlikely to be economic, but is noted as associated mineralization. - Positive factor: Associated mineralization in a new discovery - Negative factor: Very low tungsten grade - Negative factor: True width not known #### Tags used in scoring **QA/QC Disclosed** Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Why it applies: qaqc\_disclosed is true **Compositing Transparent** Polarity: positive Definition: Cut-off grade and internal dilution rules are clearly stated for reported intervals. Why it applies: cutoff\_grade and internal dilution are both stated **Nearology Play** Polarity: neutral Definition: Value premise rests on proximity to a known deposit rather than own results. Why it applies: proximity is offered as the value premise: "21 initial broadly spaced drill holes were completed at the Stannex Prospect, approximately 1km northeast of the Gilmore" ### MGRC005 [Link to this fact](https://atlas-staging.minestarters.com/news/kob-thick-high-grade-tin-intersected-at-the-mt-garnet-project--9ef8b14b-4cc4-486b-92ee-9b0ec78fa39f#fact-drill-facts-37) Mt Garnet · copper #### Identity - Hole ID: MGRC005 - Project: Mt Garnet - Commodity: copper - Region: australia\_qld - Reported Region: australia\_qld - Ticker: KOB #### Geometry - Grade: 0.01 - Grade Unit: % - Intercept: 1 m - From: 8 m - To: 9 m - Hole Depth: 80 m - Intercept Depth: 8 m #### Classification - Deposit Type: other - Program: exploration - Sample Type: drill - Group ID: MGRC005:8-9 - Mining Method: underground #### Location - Easting: 281365 - Northing: 8060448 - Elevation: 624 m - Azimuth: 47 ° - Dip: -60 ° - Loc. Confidence: high - Loc. Source: document #### QA/QC - Laboratory: Intertek Minerals Townsville Laboratory and Intertek Genalysis Perth - QA/QC Disclosed: Yes - QP Signed: Yes - QA/QC Methods: standards, blanks, duplicates #### Compositing - Cutoff Grade: 0.1 - Cutoff Unit: % Sn - Dilution Disclosed: Yes - Max Dilution: 2 m #### Review - Needs Review: No - Interp. Status: scored - Historical: No #### Dates - Event date: 2026-10-13T00:00:00.000Z Reasoning: The copper grade of 0.01% over 1m is a trace amount and not economically significant, but is noted as associated mineralization. - Positive factor: Associated mineralization in a new discovery - Negative factor: Trace copper grade - Negative factor: True width not known #### Tags used in scoring **QA/QC Disclosed** Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Why it applies: qaqc\_disclosed is true **Compositing Transparent** Polarity: positive Definition: Cut-off grade and internal dilution rules are clearly stated for reported intervals. Why it applies: cutoff\_grade and internal dilution are both stated **Nearology Play** Polarity: neutral Definition: Value premise rests on proximity to a known deposit rather than own results. Why it applies: proximity is offered as the value premise: "21 initial broadly spaced drill holes were completed at the Stannex Prospect, approximately 1km northeast of the Gilmore" ### MGRC005 [Link to this fact](https://atlas-staging.minestarters.com/news/kob-thick-high-grade-tin-intersected-at-the-mt-garnet-project--9ef8b14b-4cc4-486b-92ee-9b0ec78fa39f#fact-drill-facts-38) Mt Garnet · zinc #### Identity - Hole ID: MGRC005 - Project: Mt Garnet - Commodity: zinc - Region: australia\_qld - Reported Region: australia\_qld - Ticker: KOB #### Geometry - Grade: 0.07 - Grade Unit: % - Intercept: 1 m - From: 8 m - To: 9 m - Hole Depth: 80 m - Intercept Depth: 8 m #### Classification - Deposit Type: other - Program: exploration - Sample Type: drill - Group ID: MGRC005:8-9 - Mining Method: underground #### Location - Easting: 281365 - Northing: 8060448 - Elevation: 624 m - Azimuth: 47 ° - Dip: -60 ° - Loc. Confidence: high - Loc. Source: document #### QA/QC - Laboratory: Intertek Minerals Townsville Laboratory and Intertek Genalysis Perth - QA/QC Disclosed: Yes - QP Signed: Yes - QA/QC Methods: standards, blanks, duplicates #### Compositing - Cutoff Grade: 0.1 - Cutoff Unit: % Sn - Dilution Disclosed: Yes - Max Dilution: 2 m #### Review - Needs Review: No - Interp. Status: scored - Historical: No #### Dates - Event date: 2026-10-13T00:00:00.000Z Reasoning: The zinc grade of 0.07% over 1m is a trace amount and not economically significant, but is noted as associated mineralization. - Positive factor: Associated mineralization in a new discovery - Negative factor: Trace zinc grade - Negative factor: True width not known #### Tags used in scoring **QA/QC Disclosed** Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Why it applies: qaqc\_disclosed is true **Compositing Transparent** Polarity: positive Definition: Cut-off grade and internal dilution rules are clearly stated for reported intervals. Why it applies: cutoff\_grade and internal dilution are both stated **Nearology Play** Polarity: neutral Definition: Value premise rests on proximity to a known deposit rather than own results. Why it applies: proximity is offered as the value premise: "21 initial broadly spaced drill holes were completed at the Stannex Prospect, approximately 1km northeast of the Gilmore" ### MGRC005 [Link to this fact](https://atlas-staging.minestarters.com/news/kob-thick-high-grade-tin-intersected-at-the-mt-garnet-project--9ef8b14b-4cc4-486b-92ee-9b0ec78fa39f#fact-drill-facts-39) Mt Garnet · silver #### Identity - Hole ID: MGRC005 - Project: Mt Garnet - Commodity: silver - Region: australia\_qld - Reported Region: australia\_qld - Ticker: KOB #### Geometry - Grade: 5 - Grade Unit: g/t - Intercept: 1 m - From: 8 m - To: 9 m - Hole Depth: 80 m - Intercept Depth: 8 m #### Classification - Deposit Type: other - Program: exploration - Sample Type: drill - Group ID: MGRC005:8-9 - Mining Method: underground #### Location - Easting: 281365 - Northing: 8060448 - Elevation: 624 m - Azimuth: 47 ° - Dip: -60 ° - Loc. Confidence: high - Loc. Source: document #### QA/QC - Laboratory: Intertek Minerals Townsville Laboratory and Intertek Genalysis Perth - QA/QC Disclosed: Yes - QP Signed: Yes - QA/QC Methods: standards, blanks, duplicates #### Compositing - Cutoff Grade: 0.1 - Cutoff Unit: % Sn - Dilution Disclosed: Yes - Max Dilution: 2 m #### Review - Needs Review: No - Interp. Status: scored - Historical: No #### Dates - Event date: 2026-10-13T00:00:00.000Z Reasoning: The silver grade of 5 g/t over 1m is a trace amount and not economically significant, and the high detection limit for silver reduces confidence in the reported value. - Positive factor: Associated mineralization in a new discovery - Negative factor: Trace silver grade - Negative factor: True width not known - Negative factor: High detection limit for silver \(10 g/t\) reduces confidence in reported values #### Tags used in scoring **QA/QC Disclosed** Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Why it applies: qaqc\_disclosed is true **Compositing Transparent** Polarity: positive Definition: Cut-off grade and internal dilution rules are clearly stated for reported intervals. Why it applies: cutoff\_grade and internal dilution are both stated **Nearology Play** Polarity: neutral Definition: Value premise rests on proximity to a known deposit rather than own results. Why it applies: proximity is offered as the value premise: "21 initial broadly spaced drill holes were completed at the Stannex Prospect, approximately 1km northeast of the Gilmore" ### MGRC005 [Link to this fact](https://atlas-staging.minestarters.com/news/kob-thick-high-grade-tin-intersected-at-the-mt-garnet-project--9ef8b14b-4cc4-486b-92ee-9b0ec78fa39f#fact-drill-facts-40) Mt Garnet · indium #### Identity - Hole ID: MGRC005 - Project: Mt Garnet - Commodity: indium - Region: australia\_qld - Reported Region: australia\_qld - Ticker: KOB #### Geometry - Grade: 2.5 - Grade Unit: g/t - Intercept: 1 m - From: 8 m - To: 9 m - Hole Depth: 80 m - Intercept Depth: 8 m #### Classification - Deposit Type: other - Program: exploration - Sample Type: drill - Group ID: MGRC005:8-9 - Mining Method: underground #### Location - Easting: 281365 - Northing: 8060448 - Elevation: 624 m - Azimuth: 47 ° - Dip: -60 ° - Loc. Confidence: high - Loc. Source: document #### QA/QC - Laboratory: Intertek Minerals Townsville Laboratory and Intertek Genalysis Perth - QA/QC Disclosed: Yes - QP Signed: Yes - QA/QC Methods: standards, blanks, duplicates #### Compositing - Cutoff Grade: 0.1 - Cutoff Unit: % Sn - Dilution Disclosed: Yes - Max Dilution: 2 m #### Review - Needs Review: No - Interp. Status: scored - Historical: No #### Dates - Event date: 2026-10-13T00:00:00.000Z Reasoning: The indium grade of 2.5 g/t over 1m is a trace amount and not economically significant, but is noted as associated mineralization. - Positive factor: Associated mineralization in a new discovery - Negative factor: Trace indium grade - Negative factor: True width not known #### Tags used in scoring **QA/QC Disclosed** Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Why it applies: qaqc\_disclosed is true **Compositing Transparent** Polarity: positive Definition: Cut-off grade and internal dilution rules are clearly stated for reported intervals. Why it applies: cutoff\_grade and internal dilution are both stated **Nearology Play** Polarity: neutral Definition: Value premise rests on proximity to a known deposit rather than own results. Why it applies: proximity is offered as the value premise: "21 initial broadly spaced drill holes were completed at the Stannex Prospect, approximately 1km northeast of the Gilmore" ### MGRC005 [Link to this fact](https://atlas-staging.minestarters.com/news/kob-thick-high-grade-tin-intersected-at-the-mt-garnet-project--9ef8b14b-4cc4-486b-92ee-9b0ec78fa39f#fact-drill-facts-41) Mt Garnet · tin #### Identity - Hole ID: MGRC005 - Project: Mt Garnet - Commodity: tin - Region: australia\_qld - Reported Region: australia\_qld - Ticker: KOB #### Geometry - Grade: 0.21 - Grade Unit: % - Intercept: 2 m - From: 15 m - To: 17 m - Hole Depth: 80 m - Intercept Depth: 8 m #### Classification - Deposit Type: other - Program: exploration - Sample Type: drill - Group ID: MGRC005:15-17 - Mining Method: underground #### Location - Easting: 281365 - Northing: 8060448 - Elevation: 624 m - Azimuth: 47 ° - Dip: -60 ° - Loc. Confidence: high - Loc. Source: document #### QA/QC - Laboratory: Intertek Minerals Townsville Laboratory and Intertek Genalysis Perth - QA/QC Disclosed: Yes - QP Signed: Yes - QA/QC Methods: standards, blanks, duplicates #### Compositing - Cutoff Grade: 0.1 - Cutoff Unit: % Sn - Dilution Disclosed: Yes - Max Dilution: 2 m #### Review - Needs Review: No - Interp. Status: scored - Historical: No #### Dates - Event date: 2026-10-13T00:00:00.000Z Reasoning: This intercept of 2m at 0.21% Sn is below the weak grade threshold for tin in an underground context, but contributes to the overall mineralization footprint at Stannex. - Positive factor: Part of a maiden drilling program at Stannex Prospect, indicating new discovery - Negative factor: Grade is below the weak threshold for tin in an underground context - Negative factor: Narrow width of 2m - Negative factor: True width not known #### Tags used in scoring **QA/QC Disclosed** Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Why it applies: qaqc\_disclosed is true **Compositing Transparent** Polarity: positive Definition: Cut-off grade and internal dilution rules are clearly stated for reported intervals. Why it applies: cutoff\_grade and internal dilution are both stated **Nearology Play** Polarity: neutral Definition: Value premise rests on proximity to a known deposit rather than own results. Why it applies: proximity is offered as the value premise: "21 initial broadly spaced drill holes were completed at the Stannex Prospect, approximately 1km northeast of the Gilmore" ### MGRC005 [Link to this fact](https://atlas-staging.minestarters.com/news/kob-thick-high-grade-tin-intersected-at-the-mt-garnet-project--9ef8b14b-4cc4-486b-92ee-9b0ec78fa39f#fact-drill-facts-42) Mt Garnet · tungsten #### Identity - Hole ID: MGRC005 - Project: Mt Garnet - Commodity: tungsten - Region: australia\_qld - Reported Region: australia\_qld - Ticker: KOB #### Geometry - Grade: 47 - Grade Unit: ppm - Intercept: 2 m - From: 15 m - To: 17 m - Hole Depth: 80 m - Intercept Depth: 8 m #### Classification - Deposit Type: other - Program: exploration - Sample Type: drill - Group ID: MGRC005:15-17 - Mining Method: underground #### Location - Easting: 281365 - Northing: 8060448 - Elevation: 624 m - Azimuth: 47 ° - Dip: -60 ° - Loc. Confidence: high - Loc. Source: document #### QA/QC - Laboratory: Intertek Minerals Townsville Laboratory and Intertek Genalysis Perth - QA/QC Disclosed: Yes - QP Signed: Yes - QA/QC Methods: standards, blanks, duplicates #### Compositing - Cutoff Grade: 0.1 - Cutoff Unit: % Sn - Dilution Disclosed: Yes - Max Dilution: 2 m #### Review - Needs Review: No - Interp. Status: scored - Historical: No #### Dates - Event date: 2026-10-13T00:00:00.000Z Reasoning: The tungsten grade of 47 ppm over 2m is very low and unlikely to be economic, but is noted as associated mineralization. - Positive factor: Associated mineralization in a new discovery - Negative factor: Very low tungsten grade - Negative factor: True width not known #### Tags used in scoring **QA/QC Disclosed** Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Why it applies: qaqc\_disclosed is true **Compositing Transparent** Polarity: positive Definition: Cut-off grade and internal dilution rules are clearly stated for reported intervals. Why it applies: cutoff\_grade and internal dilution are both stated **Nearology Play** Polarity: neutral Definition: Value premise rests on proximity to a known deposit rather than own results. Why it applies: proximity is offered as the value premise: "21 initial broadly spaced drill holes were completed at the Stannex Prospect, approximately 1km northeast of the Gilmore" ### MGRC005 [Link to this fact](https://atlas-staging.minestarters.com/news/kob-thick-high-grade-tin-intersected-at-the-mt-garnet-project--9ef8b14b-4cc4-486b-92ee-9b0ec78fa39f#fact-drill-facts-43) Mt Garnet · copper #### Identity - Hole ID: MGRC005 - Project: Mt Garnet - Commodity: copper - Region: australia\_qld - Reported Region: australia\_qld - Ticker: KOB #### Geometry - Grade: 0.01 - Grade Unit: % - Intercept: 2 m - From: 15 m - To: 17 m - Hole Depth: 80 m - Intercept Depth: 8 m #### Classification - Deposit Type: other - Program: exploration - Sample Type: drill - Group ID: MGRC005:15-17 - Mining Method: underground #### Location - Easting: 281365 - Northing: 8060448 - Elevation: 624 m - Azimuth: 47 ° - Dip: -60 ° - Loc. Confidence: high - Loc. Source: document #### QA/QC - Laboratory: Intertek Minerals Townsville Laboratory and Intertek Genalysis Perth - QA/QC Disclosed: Yes - QP Signed: Yes - QA/QC Methods: standards, blanks, duplicates #### Compositing - Cutoff Grade: 0.1 - Cutoff Unit: % Sn - Dilution Disclosed: Yes - Max Dilution: 2 m #### Review - Needs Review: No - Interp. Status: scored - Historical: No #### Dates - Event date: 2026-10-13T00:00:00.000Z Reasoning: The copper grade of 0.01% over 2m is a trace amount and not economically significant, but is noted as associated mineralization. - Positive factor: Associated mineralization in a new discovery - Negative factor: Trace copper grade - Negative factor: True width not known #### Tags used in scoring **QA/QC Disclosed** Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Why it applies: qaqc\_disclosed is true **Compositing Transparent** Polarity: positive Definition: Cut-off grade and internal dilution rules are clearly stated for reported intervals. Why it applies: cutoff\_grade and internal dilution are both stated **Nearology Play** Polarity: neutral Definition: Value premise rests on proximity to a known deposit rather than own results. Why it applies: proximity is offered as the value premise: "21 initial broadly spaced drill holes were completed at the Stannex Prospect, approximately 1km northeast of the Gilmore" ### MGRC005 [Link to this fact](https://atlas-staging.minestarters.com/news/kob-thick-high-grade-tin-intersected-at-the-mt-garnet-project--9ef8b14b-4cc4-486b-92ee-9b0ec78fa39f#fact-drill-facts-44) Mt Garnet · zinc #### Identity - Hole ID: MGRC005 - Project: Mt Garnet - Commodity: zinc - Region: australia\_qld - Reported Region: australia\_qld - Ticker: KOB #### Geometry - Grade: 0.08 - Grade Unit: % - Intercept: 2 m - From: 15 m - To: 17 m - Hole Depth: 80 m - Intercept Depth: 8 m #### Classification - Deposit Type: other - Program: exploration - Sample Type: drill - Group ID: MGRC005:15-17 - Mining Method: underground #### Location - Easting: 281365 - Northing: 8060448 - Elevation: 624 m - Azimuth: 47 ° - Dip: -60 ° - Loc. Confidence: high - Loc. Source: document #### QA/QC - Laboratory: Intertek Minerals Townsville Laboratory and Intertek Genalysis Perth - QA/QC Disclosed: Yes - QP Signed: Yes - QA/QC Methods: standards, blanks, duplicates #### Compositing - Cutoff Grade: 0.1 - Cutoff Unit: % Sn - Dilution Disclosed: Yes - Max Dilution: 2 m #### Review - Needs Review: No - Interp. Status: scored - Historical: No #### Dates - Event date: 2026-10-13T00:00:00.000Z Reasoning: The zinc grade of 0.08% over 2m is a trace amount and not economically significant, but is noted as associated mineralization. - Positive factor: Associated mineralization in a new discovery - Negative factor: Trace zinc grade - Negative factor: True width not known #### Tags used in scoring **QA/QC Disclosed** Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Why it applies: qaqc\_disclosed is true **Compositing Transparent** Polarity: positive Definition: Cut-off grade and internal dilution rules are clearly stated for reported intervals. Why it applies: cutoff\_grade and internal dilution are both stated **Nearology Play** Polarity: neutral Definition: Value premise rests on proximity to a known deposit rather than own results. Why it applies: proximity is offered as the value premise: "21 initial broadly spaced drill holes were completed at the Stannex Prospect, approximately 1km northeast of the Gilmore" ### MGRC005 [Link to this fact](https://atlas-staging.minestarters.com/news/kob-thick-high-grade-tin-intersected-at-the-mt-garnet-project--9ef8b14b-4cc4-486b-92ee-9b0ec78fa39f#fact-drill-facts-45) Mt Garnet · silver #### Identity - Hole ID: MGRC005 - Project: Mt Garnet - Commodity: silver - Region: australia\_qld - Reported Region: australia\_qld - Ticker: KOB #### Geometry - Grade: 5 - Grade Unit: g/t - Intercept: 2 m - From: 15 m - To: 17 m - Hole Depth: 80 m - Intercept Depth: 8 m #### Classification - Deposit Type: other - Program: exploration - Sample Type: drill - Group ID: MGRC005:15-17 - Mining Method: underground #### Location - Easting: 281365 - Northing: 8060448 - Elevation: 624 m - Azimuth: 47 ° - Dip: -60 ° - Loc. Confidence: high - Loc. Source: document #### QA/QC - Laboratory: Intertek Minerals Townsville Laboratory and Intertek Genalysis Perth - QA/QC Disclosed: Yes - QP Signed: Yes - QA/QC Methods: standards, blanks, duplicates #### Compositing - Cutoff Grade: 0.1 - Cutoff Unit: % Sn - Dilution Disclosed: Yes - Max Dilution: 2 m #### Review - Needs Review: No - Interp. Status: scored - Historical: No #### Dates - Event date: 2026-10-13T00:00:00.000Z Reasoning: The silver grade of 5 g/t over 2m is a trace amount and not economically significant, and the high detection limit for silver reduces confidence in the reported value. - Positive factor: Associated mineralization in a new discovery - Negative factor: Trace silver grade - Negative factor: True width not known - Negative factor: High detection limit for silver \(10 g/t\) reduces confidence in reported values #### Tags used in scoring **QA/QC Disclosed** Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Why it applies: qaqc\_disclosed is true **Compositing Transparent** Polarity: positive Definition: Cut-off grade and internal dilution rules are clearly stated for reported intervals. Why it applies: cutoff\_grade and internal dilution are both stated **Nearology Play** Polarity: neutral Definition: Value premise rests on proximity to a known deposit rather than own results. Why it applies: proximity is offered as the value premise: "21 initial broadly spaced drill holes were completed at the Stannex Prospect, approximately 1km northeast of the Gilmore" ### MGRC005 [Link to this fact](https://atlas-staging.minestarters.com/news/kob-thick-high-grade-tin-intersected-at-the-mt-garnet-project--9ef8b14b-4cc4-486b-92ee-9b0ec78fa39f#fact-drill-facts-46) Mt Garnet · indium #### Identity - Hole ID: MGRC005 - Project: Mt Garnet - Commodity: indium - Region: australia\_qld - Reported Region: australia\_qld - Ticker: KOB #### Geometry - Grade: 2.6 - Grade Unit: g/t - Intercept: 2 m - From: 15 m - To: 17 m - Hole Depth: 80 m - Intercept Depth: 8 m #### Classification - Deposit Type: other - Program: exploration - Sample Type: drill - Group ID: MGRC005:15-17 - Mining Method: underground #### Location - Easting: 281365 - Northing: 8060448 - Elevation: 624 m - Azimuth: 47 ° - Dip: -60 ° - Loc. Confidence: high - Loc. Source: document #### QA/QC - Laboratory: Intertek Minerals Townsville Laboratory and Intertek Genalysis Perth - QA/QC Disclosed: Yes - QP Signed: Yes - QA/QC Methods: standards, blanks, duplicates #### Compositing - Cutoff Grade: 0.1 - Cutoff Unit: % Sn - Dilution Disclosed: Yes - Max Dilution: 2 m #### Review - Needs Review: No - Interp. Status: scored - Historical: No #### Dates - Event date: 2026-10-13T00:00:00.000Z Reasoning: The indium grade of 2.6 g/t over 2m is a trace amount and not economically significant, but is noted as associated mineralization. - Positive factor: Associated mineralization in a new discovery - Negative factor: Trace indium grade - Negative factor: True width not known #### Tags used in scoring **QA/QC Disclosed** Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Why it applies: qaqc\_disclosed is true **Compositing Transparent** Polarity: positive Definition: Cut-off grade and internal dilution rules are clearly stated for reported intervals. Why it applies: cutoff\_grade and internal dilution are both stated **Nearology Play** Polarity: neutral Definition: Value premise rests on proximity to a known deposit rather than own results. Why it applies: proximity is offered as the value premise: "21 initial broadly spaced drill holes were completed at the Stannex Prospect, approximately 1km northeast of the Gilmore" ### MGRC005 [Link to this fact](https://atlas-staging.minestarters.com/news/kob-thick-high-grade-tin-intersected-at-the-mt-garnet-project--9ef8b14b-4cc4-486b-92ee-9b0ec78fa39f#fact-drill-facts-47) Mt Garnet · tin #### Identity - Hole ID: MGRC005 - Project: Mt Garnet - Commodity: tin - Region: australia\_qld - Reported Region: australia\_qld - Ticker: KOB #### Geometry - Grade: 0.14 - Grade Unit: % - Intercept: 1 m - From: 20 m - To: 21 m - Hole Depth: 80 m - Intercept Depth: 8 m #### Classification - Deposit Type: other - Program: exploration - Sample Type: drill - Group ID: MGRC005:20-21 - Mining Method: underground #### Location - Easting: 281365 - Northing: 8060448 - Elevation: 624 m - Azimuth: 47 ° - Dip: -60 ° - Loc. Confidence: high - Loc. Source: document #### QA/QC - Laboratory: Intertek Minerals Townsville Laboratory and Intertek Genalysis Perth - QA/QC Disclosed: Yes - QP Signed: Yes - QA/QC Methods: standards, blanks, duplicates #### Compositing - Cutoff Grade: 0.1 - Cutoff Unit: % Sn - Dilution Disclosed: Yes - Max Dilution: 2 m #### Review - Needs Review: No - Interp. Status: scored - Historical: No #### Dates - Event date: 2026-10-13T00:00:00.000Z Reasoning: This intercept of 1m at 0.14% Sn is below the weak grade threshold for tin in an underground context, but contributes to the overall mineralization footprint at Stannex. - Positive factor: Part of a maiden drilling program at Stannex Prospect, indicating new discovery - Negative factor: Grade is below the weak threshold for tin in an underground context - Negative factor: Narrow width of 1m - Negative factor: True width not known #### Tags used in scoring **QA/QC Disclosed** Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Why it applies: qaqc\_disclosed is true **Compositing Transparent** Polarity: positive Definition: Cut-off grade and internal dilution rules are clearly stated for reported intervals. Why it applies: cutoff\_grade and internal dilution are both stated **Nearology Play** Polarity: neutral Definition: Value premise rests on proximity to a known deposit rather than own results. Why it applies: proximity is offered as the value premise: "21 initial broadly spaced drill holes were completed at the Stannex Prospect, approximately 1km northeast of the Gilmore" ### MGRC005 [Link to this fact](https://atlas-staging.minestarters.com/news/kob-thick-high-grade-tin-intersected-at-the-mt-garnet-project--9ef8b14b-4cc4-486b-92ee-9b0ec78fa39f#fact-drill-facts-48) Mt Garnet · tungsten #### Identity - Hole ID: MGRC005 - Project: Mt Garnet - Commodity: tungsten - Region: australia\_qld - Reported Region: australia\_qld - Ticker: KOB #### Geometry - Grade: 10 - Grade Unit: ppm - Intercept: 1 m - From: 20 m - To: 21 m - Hole Depth: 80 m - Intercept Depth: 8 m #### Classification - Deposit Type: other - Program: exploration - Sample Type: drill - Group ID: MGRC005:20-21 - Mining Method: underground #### Location - Easting: 281365 - Northing: 8060448 - Elevation: 624 m - Azimuth: 47 ° - Dip: -60 ° - Loc. Confidence: high - Loc. Source: document #### QA/QC - Laboratory: Intertek Minerals Townsville Laboratory and Intertek Genalysis Perth - QA/QC Disclosed: Yes - QP Signed: Yes - QA/QC Methods: standards, blanks, duplicates #### Compositing - Cutoff Grade: 0.1 - Cutoff Unit: % Sn - Dilution Disclosed: Yes - Max Dilution: 2 m #### Review - Needs Review: No - Interp. Status: scored - Historical: No #### Dates - Event date: 2026-10-13T00:00:00.000Z Reasoning: The tungsten grade of 10 ppm over 1m is very low and unlikely to be economic, but is noted as associated mineralization. - Positive factor: Associated mineralization in a new discovery - Negative factor: Very low tungsten grade - Negative factor: True width not known #### Tags used in scoring **QA/QC Disclosed** Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Why it applies: qaqc\_disclosed is true **Compositing Transparent** Polarity: positive Definition: Cut-off grade and internal dilution rules are clearly stated for reported intervals. Why it applies: cutoff\_grade and internal dilution are both stated **Nearology Play** Polarity: neutral Definition: Value premise rests on proximity to a known deposit rather than own results. Why it applies: proximity is offered as the value premise: "21 initial broadly spaced drill holes were completed at the Stannex Prospect, approximately 1km northeast of the Gilmore" ### MGRC005 [Link to this fact](https://atlas-staging.minestarters.com/news/kob-thick-high-grade-tin-intersected-at-the-mt-garnet-project--9ef8b14b-4cc4-486b-92ee-9b0ec78fa39f#fact-drill-facts-49) Mt Garnet · copper #### Identity - Hole ID: MGRC005 - Project: Mt Garnet - Commodity: copper - Region: australia\_qld - Reported Region: australia\_qld - Ticker: KOB #### Geometry - Grade: 0.01 - Grade Unit: % - Intercept: 1 m - From: 20 m - To: 21 m - Hole Depth: 80 m - Intercept Depth: 8 m #### Classification - Deposit Type: other - Program: exploration - Sample Type: drill - Group ID: MGRC005:20-21 - Mining Method: underground #### Location - Easting: 281365 - Northing: 8060448 - Elevation: 624 m - Azimuth: 47 ° - Dip: -60 ° - Loc. Confidence: high - Loc. Source: document #### QA/QC - Laboratory: Intertek Minerals Townsville Laboratory and Intertek Genalysis Perth - QA/QC Disclosed: Yes - QP Signed: Yes - QA/QC Methods: standards, blanks, duplicates #### Compositing - Cutoff Grade: 0.1 - Cutoff Unit: % Sn - Dilution Disclosed: Yes - Max Dilution: 2 m #### Review - Needs Review: No - Interp. Status: scored - Historical: No #### Dates - Event date: 2026-10-13T00:00:00.000Z Reasoning: The copper grade of 0.01% over 1m is a trace amount and not economically significant, but is noted as associated mineralization. - Positive factor: Associated mineralization in a new discovery - Negative factor: Trace copper grade - Negative factor: True width not known #### Tags used in scoring **QA/QC Disclosed** Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Why it applies: qaqc\_disclosed is true **Compositing Transparent** Polarity: positive Definition: Cut-off grade and internal dilution rules are clearly stated for reported intervals. Why it applies: cutoff\_grade and internal dilution are both stated **Nearology Play** Polarity: neutral Definition: Value premise rests on proximity to a known deposit rather than own results. Why it applies: proximity is offered as the value premise: "21 initial broadly spaced drill holes were completed at the Stannex Prospect, approximately 1km northeast of the Gilmore" ### MGRC005 [Link to this fact](https://atlas-staging.minestarters.com/news/kob-thick-high-grade-tin-intersected-at-the-mt-garnet-project--9ef8b14b-4cc4-486b-92ee-9b0ec78fa39f#fact-drill-facts-50) Mt Garnet · zinc #### Identity - Hole ID: MGRC005 - Project: Mt Garnet - Commodity: zinc - Region: australia\_qld - Reported Region: australia\_qld - Ticker: KOB #### Geometry - Grade: 0.16 - Grade Unit: % - Intercept: 1 m - From: 20 m - To: 21 m - Hole Depth: 80 m - Intercept Depth: 8 m #### Classification - Deposit Type: other - Program: exploration - Sample Type: drill - Group ID: MGRC005:20-21 - Mining Method: underground #### Location - Easting: 281365 - Northing: 8060448 - Elevation: 624 m - Azimuth: 47 ° - Dip: -60 ° - Loc. Confidence: high - Loc. Source: document #### QA/QC - Laboratory: Intertek Minerals Townsville Laboratory and Intertek Genalysis Perth - QA/QC Disclosed: Yes - QP Signed: Yes - QA/QC Methods: standards, blanks, duplicates #### Compositing - Cutoff Grade: 0.1 - Cutoff Unit: % Sn - Dilution Disclosed: Yes - Max Dilution: 2 m #### Review - Needs Review: No - Interp. Status: scored - Historical: No #### Dates - Event date: 2026-10-13T00:00:00.000Z Reasoning: The zinc grade of 0.16% over 1m is a trace amount and not economically significant, but is noted as associated mineralization. - Positive factor: Associated mineralization in a new discovery - Negative factor: Trace zinc grade - Negative factor: True width not known #### Tags used in scoring **QA/QC Disclosed** Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Why it applies: qaqc\_disclosed is true **Compositing Transparent** Polarity: positive Definition: Cut-off grade and internal dilution rules are clearly stated for reported intervals. Why it applies: cutoff\_grade and internal dilution are both stated **Nearology Play** Polarity: neutral Definition: Value premise rests on proximity to a known deposit rather than own results. Why it applies: proximity is offered as the value premise: "21 initial broadly spaced drill holes were completed at the Stannex Prospect, approximately 1km northeast of the Gilmore" ### MGRC005 [Link to this fact](https://atlas-staging.minestarters.com/news/kob-thick-high-grade-tin-intersected-at-the-mt-garnet-project--9ef8b14b-4cc4-486b-92ee-9b0ec78fa39f#fact-drill-facts-51) Mt Garnet · silver #### Identity - Hole ID: MGRC005 - Project: Mt Garnet - Commodity: silver - Region: australia\_qld - Reported Region: australia\_qld - Ticker: KOB #### Geometry - Grade: 5 - Grade Unit: g/t - Intercept: 1 m - From: 20 m - To: 21 m - Hole Depth: 80 m - Intercept Depth: 8 m #### Classification - Deposit Type: other - Program: exploration - Sample Type: drill - Group ID: MGRC005:20-21 - Mining Method: underground #### Location - Easting: 281365 - Northing: 8060448 - Elevation: 624 m - Azimuth: 47 ° - Dip: -60 ° - Loc. Confidence: high - Loc. Source: document #### QA/QC - Laboratory: Intertek Minerals Townsville Laboratory and Intertek Genalysis Perth - QA/QC Disclosed: Yes - QP Signed: Yes - QA/QC Methods: standards, blanks, duplicates #### Compositing - Cutoff Grade: 0.1 - Cutoff Unit: % Sn - Dilution Disclosed: Yes - Max Dilution: 2 m #### Review - Needs Review: No - Interp. Status: scored - Historical: No #### Dates - Event date: 2026-10-13T00:00:00.000Z Reasoning: The silver grade of 5 g/t over 1m is a trace amount and not economically significant, and the high detection limit for silver reduces confidence in the reported value. - Positive factor: Associated mineralization in a new discovery - Negative factor: Trace silver grade - Negative factor: True width not known - Negative factor: High detection limit for silver \(10 g/t\) reduces confidence in reported values #### Tags used in scoring **QA/QC Disclosed** Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Why it applies: qaqc\_disclosed is true **Compositing Transparent** Polarity: positive Definition: Cut-off grade and internal dilution rules are clearly stated for reported intervals. Why it applies: cutoff\_grade and internal dilution are both stated **Nearology Play** Polarity: neutral Definition: Value premise rests on proximity to a known deposit rather than own results. Why it applies: proximity is offered as the value premise: "21 initial broadly spaced drill holes were completed at the Stannex Prospect, approximately 1km northeast of the Gilmore" ### MGRC005 [Link to this fact](https://atlas-staging.minestarters.com/news/kob-thick-high-grade-tin-intersected-at-the-mt-garnet-project--9ef8b14b-4cc4-486b-92ee-9b0ec78fa39f#fact-drill-facts-52) Mt Garnet · indium #### Identity - Hole ID: MGRC005 - Project: Mt Garnet - Commodity: indium - Region: australia\_qld - Reported Region: australia\_qld - Ticker: KOB #### Geometry - Grade: 3 - Grade Unit: g/t - Intercept: 1 m - From: 20 m - To: 21 m - Hole Depth: 80 m - Intercept Depth: 8 m #### Classification - Deposit Type: other - Program: exploration - Sample Type: drill - Group ID: MGRC005:20-21 - Mining Method: underground #### Location - Easting: 281365 - Northing: 8060448 - Elevation: 624 m - Azimuth: 47 ° - Dip: -60 ° - Loc. Confidence: high - Loc. Source: document #### QA/QC - Laboratory: Intertek Minerals Townsville Laboratory and Intertek Genalysis Perth - QA/QC Disclosed: Yes - QP Signed: Yes - QA/QC Methods: standards, blanks, duplicates #### Compositing - Cutoff Grade: 0.1 - Cutoff Unit: % Sn - Dilution Disclosed: Yes - Max Dilution: 2 m #### Review - Needs Review: No - Interp. Status: scored - Historical: No #### Dates - Event date: 2026-10-13T00:00:00.000Z Reasoning: The indium grade of 3.0 g/t over 1m is a trace amount and not economically significant, but is noted as associated mineralization. - Positive factor: Associated mineralization in a new discovery - Negative factor: Trace indium grade - Negative factor: True width not known #### Tags used in scoring **QA/QC Disclosed** Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Why it applies: qaqc\_disclosed is true **Compositing Transparent** Polarity: positive Definition: Cut-off grade and internal dilution rules are clearly stated for reported intervals. Why it applies: cutoff\_grade and internal dilution are both stated **Nearology Play** Polarity: neutral Definition: Value premise rests on proximity to a known deposit rather than own results. Why it applies: proximity is offered as the value premise: "21 initial broadly spaced drill holes were completed at the Stannex Prospect, approximately 1km northeast of the Gilmore" ### MGRC005 [Link to this fact](https://atlas-staging.minestarters.com/news/kob-thick-high-grade-tin-intersected-at-the-mt-garnet-project--9ef8b14b-4cc4-486b-92ee-9b0ec78fa39f#fact-drill-facts-53) Mt Garnet · tin #### Identity - Hole ID: MGRC005 - Project: Mt Garnet - Commodity: tin - Region: australia\_qld - Reported Region: australia\_qld - Ticker: KOB #### Geometry - Grade: 0.13 - Grade Unit: % - Intercept: 4 m - From: 62 m - To: 66 m - Hole Depth: 80 m - Intercept Depth: 8 m #### Classification - Deposit Type: other - Program: exploration - Sample Type: drill - Group ID: MGRC005:62-66 - Mining Method: underground #### Location - Easting: 281365 - Northing: 8060448 - Elevation: 624 m - Azimuth: 47 ° - Dip: -60 ° - Loc. Confidence: high - Loc. Source: document #### QA/QC - Laboratory: Intertek Minerals Townsville Laboratory and Intertek Genalysis Perth - QA/QC Disclosed: Yes - QP Signed: Yes - QA/QC Methods: standards, blanks, duplicates #### Compositing - Cutoff Grade: 0.1 - Cutoff Unit: % Sn - Dilution Disclosed: Yes - Max Dilution: 2 m #### Review - Needs Review: No - Interp. Status: scored - Historical: No #### Dates - Event date: 2026-10-13T00:00:00.000Z Reasoning: This intercept of 4m at 0.13% Sn is below the weak grade threshold for tin in an underground context, but contributes to the overall mineralization footprint at Stannex. - Positive factor: Part of a maiden drilling program at Stannex Prospect, indicating new discovery - Negative factor: Grade is below the weak threshold for tin in an underground context - Negative factor: True width not known #### Tags used in scoring **QA/QC Disclosed** Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Why it applies: qaqc\_disclosed is true **Compositing Transparent** Polarity: positive Definition: Cut-off grade and internal dilution rules are clearly stated for reported intervals. Why it applies: cutoff\_grade and internal dilution are both stated **Nearology Play** Polarity: neutral Definition: Value premise rests on proximity to a known deposit rather than own results. Why it applies: proximity is offered as the value premise: "21 initial broadly spaced drill holes were completed at the Stannex Prospect, approximately 1km northeast of the Gilmore" ### MGRC005 [Link to this fact](https://atlas-staging.minestarters.com/news/kob-thick-high-grade-tin-intersected-at-the-mt-garnet-project--9ef8b14b-4cc4-486b-92ee-9b0ec78fa39f#fact-drill-facts-54) Mt Garnet · tungsten #### Identity - Hole ID: MGRC005 - Project: Mt Garnet - Commodity: tungsten - Region: australia\_qld - Reported Region: australia\_qld - Ticker: KOB #### Geometry - Grade: 9 - Grade Unit: ppm - Intercept: 4 m - From: 62 m - To: 66 m - Hole Depth: 80 m - Intercept Depth: 8 m #### Classification - Deposit Type: other - Program: exploration - Sample Type: drill - Group ID: MGRC005:62-66 - Mining Method: underground #### Location - Easting: 281365 - Northing: 8060448 - Elevation: 624 m - Azimuth: 47 ° - Dip: -60 ° - Loc. Confidence: high - Loc. Source: document #### QA/QC - Laboratory: Intertek Minerals Townsville Laboratory and Intertek Genalysis Perth - QA/QC Disclosed: Yes - QP Signed: Yes - QA/QC Methods: standards, blanks, duplicates #### Compositing - Cutoff Grade: 0.1 - Cutoff Unit: % Sn - Dilution Disclosed: Yes - Max Dilution: 2 m #### Review - Needs Review: No - Interp. Status: scored - Historical: No #### Dates - Event date: 2026-10-13T00:00:00.000Z Reasoning: The tungsten grade of 9 ppm over 4m is very low and unlikely to be economic, but is noted as associated mineralization. - Positive factor: Associated mineralization in a new discovery - Negative factor: Very low tungsten grade - Negative factor: True width not known #### Tags used in scoring **QA/QC Disclosed** Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Why it applies: qaqc\_disclosed is true **Compositing Transparent** Polarity: positive Definition: Cut-off grade and internal dilution rules are clearly stated for reported intervals. Why it applies: cutoff\_grade and internal dilution are both stated **Nearology Play** Polarity: neutral Definition: Value premise rests on proximity to a known deposit rather than own results. Why it applies: proximity is offered as the value premise: "21 initial broadly spaced drill holes were completed at the Stannex Prospect, approximately 1km northeast of the Gilmore" ### MGRC005 [Link to this fact](https://atlas-staging.minestarters.com/news/kob-thick-high-grade-tin-intersected-at-the-mt-garnet-project--9ef8b14b-4cc4-486b-92ee-9b0ec78fa39f#fact-drill-facts-55) Mt Garnet · copper #### Identity - Hole ID: MGRC005 - Project: Mt Garnet - Commodity: copper - Region: australia\_qld - Reported Region: australia\_qld - Ticker: KOB #### Geometry - Grade: 0 - Grade Unit: % - Intercept: 4 m - From: 62 m - To: 66 m - Hole Depth: 80 m - Intercept Depth: 8 m #### Classification - Deposit Type: other - Program: exploration - Sample Type: drill - Group ID: MGRC005:62-66 - Mining Method: underground #### Location - Easting: 281365 - Northing: 8060448 - Elevation: 624 m - Azimuth: 47 ° - Dip: -60 ° - Loc. Confidence: high - Loc. Source: document #### QA/QC - Laboratory: Intertek Minerals Townsville Laboratory and Intertek Genalysis Perth - QA/QC Disclosed: Yes - QP Signed: Yes - QA/QC Methods: standards, blanks, duplicates #### Compositing - Cutoff Grade: 0.1 - Cutoff Unit: % Sn - Dilution Disclosed: Yes - Max Dilution: 2 m #### Review - Needs Review: No - Interp. Status: scored - Historical: No #### Dates - Event date: 2026-10-13T00:00:00.000Z Reasoning: The copper grade of 0.0% over 4m is a trace amount and not economically significant, but is noted as associated mineralization. - Positive factor: Associated mineralization in a new discovery - Negative factor: Trace copper grade - Negative factor: True width not known #### Tags used in scoring **QA/QC Disclosed** Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Why it applies: qaqc\_disclosed is true **Compositing Transparent** Polarity: positive Definition: Cut-off grade and internal dilution rules are clearly stated for reported intervals. Why it applies: cutoff\_grade and internal dilution are both stated **Nearology Play** Polarity: neutral Definition: Value premise rests on proximity to a known deposit rather than own results. Why it applies: proximity is offered as the value premise: "21 initial broadly spaced drill holes were completed at the Stannex Prospect, approximately 1km northeast of the Gilmore" ### MGRC005 [Link to this fact](https://atlas-staging.minestarters.com/news/kob-thick-high-grade-tin-intersected-at-the-mt-garnet-project--9ef8b14b-4cc4-486b-92ee-9b0ec78fa39f#fact-drill-facts-56) Mt Garnet · zinc #### Identity - Hole ID: MGRC005 - Project: Mt Garnet - Commodity: zinc - Region: australia\_qld - Reported Region: australia\_qld - Ticker: KOB #### Geometry - Grade: 0.02 - Grade Unit: % - Intercept: 4 m - From: 62 m - To: 66 m - Hole Depth: 80 m - Intercept Depth: 8 m #### Classification - Deposit Type: other - Program: exploration - Sample Type: drill - Group ID: MGRC005:62-66 - Mining Method: underground #### Location - Easting: 281365 - Northing: 8060448 - Elevation: 624 m - Azimuth: 47 ° - Dip: -60 ° - Loc. Confidence: high - Loc. Source: document #### QA/QC - Laboratory: Intertek Minerals Townsville Laboratory and Intertek Genalysis Perth - QA/QC Disclosed: Yes - QP Signed: Yes - QA/QC Methods: standards, blanks, duplicates #### Compositing - Cutoff Grade: 0.1 - Cutoff Unit: % Sn - Dilution Disclosed: Yes - Max Dilution: 2 m #### Review - Needs Review: No - Interp. Status: scored - Historical: No #### Dates - Event date: 2026-10-13T00:00:00.000Z Reasoning: The zinc grade of 0.02% over 4m is a trace amount and not economically significant, but is noted as associated mineralization. - Positive factor: Associated mineralization in a new discovery - Negative factor: Trace zinc grade - Negative factor: True width not known #### Tags used in scoring **QA/QC Disclosed** Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Why it applies: qaqc\_disclosed is true **Compositing Transparent** Polarity: positive Definition: Cut-off grade and internal dilution rules are clearly stated for reported intervals. Why it applies: cutoff\_grade and internal dilution are both stated **Nearology Play** Polarity: neutral Definition: Value premise rests on proximity to a known deposit rather than own results. Why it applies: proximity is offered as the value premise: "21 initial broadly spaced drill holes were completed at the Stannex Prospect, approximately 1km northeast of the Gilmore" ### MGRC005 [Link to this fact](https://atlas-staging.minestarters.com/news/kob-thick-high-grade-tin-intersected-at-the-mt-garnet-project--9ef8b14b-4cc4-486b-92ee-9b0ec78fa39f#fact-drill-facts-57) Mt Garnet · silver #### Identity - Hole ID: MGRC005 - Project: Mt Garnet - Commodity: silver - Region: australia\_qld - Reported Region: australia\_qld - Ticker: KOB #### Geometry - Grade: 5 - Grade Unit: g/t - Intercept: 4 m - From: 62 m - To: 66 m - Hole Depth: 80 m - Intercept Depth: 8 m #### Classification - Deposit Type: other - Program: exploration - Sample Type: drill - Group ID: MGRC005:62-66 - Mining Method: underground #### Location - Easting: 281365 - Northing: 8060448 - Elevation: 624 m - Azimuth: 47 ° - Dip: -60 ° - Loc. Confidence: high - Loc. Source: document #### QA/QC - Laboratory: Intertek Minerals Townsville Laboratory and Intertek Genalysis Perth - QA/QC Disclosed: Yes - QP Signed: Yes - QA/QC Methods: standards, blanks, duplicates #### Compositing - Cutoff Grade: 0.1 - Cutoff Unit: % Sn - Dilution Disclosed: Yes - Max Dilution: 2 m #### Review - Needs Review: No - Interp. Status: scored - Historical: No #### Dates - Event date: 2026-10-13T00:00:00.000Z Reasoning: The silver grade of 5 g/t over 4m is a trace amount and not economically significant, and the high detection limit for silver reduces confidence in the reported value. - Positive factor: Associated mineralization in a new discovery - Negative factor: Trace silver grade - Negative factor: True width not known - Negative factor: High detection limit for silver \(10 g/t\) reduces confidence in reported values #### Tags used in scoring **QA/QC Disclosed** Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Why it applies: qaqc\_disclosed is true **Compositing Transparent** Polarity: positive Definition: Cut-off grade and internal dilution rules are clearly stated for reported intervals. Why it applies: cutoff\_grade and internal dilution are both stated **Nearology Play** Polarity: neutral Definition: Value premise rests on proximity to a known deposit rather than own results. Why it applies: proximity is offered as the value premise: "21 initial broadly spaced drill holes were completed at the Stannex Prospect, approximately 1km northeast of the Gilmore" ### MGRC005 [Link to this fact](https://atlas-staging.minestarters.com/news/kob-thick-high-grade-tin-intersected-at-the-mt-garnet-project--9ef8b14b-4cc4-486b-92ee-9b0ec78fa39f#fact-drill-facts-58) Mt Garnet · indium #### Identity - Hole ID: MGRC005 - Project: Mt Garnet - Commodity: indium - Region: australia\_qld - Reported Region: australia\_qld - Ticker: KOB #### Geometry - Grade: 1.6 - Grade Unit: g/t - Intercept: 4 m - From: 62 m - To: 66 m - Hole Depth: 80 m - Intercept Depth: 8 m #### Classification - Deposit Type: other - Program: exploration - Sample Type: drill - Group ID: MGRC005:62-66 - Mining Method: underground #### Location - Easting: 281365 - Northing: 8060448 - Elevation: 624 m - Azimuth: 47 ° - Dip: -60 ° - Loc. Confidence: high - Loc. Source: document #### QA/QC - Laboratory: Intertek Minerals Townsville Laboratory and Intertek Genalysis Perth - QA/QC Disclosed: Yes - QP Signed: Yes - QA/QC Methods: standards, blanks, duplicates #### Compositing - Cutoff Grade: 0.1 - Cutoff Unit: % Sn - Dilution Disclosed: Yes - Max Dilution: 2 m #### Review - Needs Review: No - Interp. Status: scored - Historical: No #### Dates - Event date: 2026-10-13T00:00:00.000Z Reasoning: The indium grade of 1.6 g/t over 4m is a trace amount and not economically significant, but is noted as associated mineralization. - Positive factor: Associated mineralization in a new discovery - Negative factor: Trace indium grade - Negative factor: True width not known #### Tags used in scoring **QA/QC Disclosed** Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Why it applies: qaqc\_disclosed is true **Compositing Transparent** Polarity: positive Definition: Cut-off grade and internal dilution rules are clearly stated for reported intervals. Why it applies: cutoff\_grade and internal dilution are both stated **Nearology Play** Polarity: neutral Definition: Value premise rests on proximity to a known deposit rather than own results. Why it applies: proximity is offered as the value premise: "21 initial broadly spaced drill holes were completed at the Stannex Prospect, approximately 1km northeast of the Gilmore" ### MGRC006 [Link to this fact](https://atlas-staging.minestarters.com/news/kob-thick-high-grade-tin-intersected-at-the-mt-garnet-project--9ef8b14b-4cc4-486b-92ee-9b0ec78fa39f#fact-drill-facts-59) Mt Garnet · tin #### Identity - Hole ID: MGRC006 - Project: Mt Garnet - Commodity: tin - Region: australia\_qld - Reported Region: australia\_qld - Ticker: KOB #### Geometry - Grade: 0.17 - Grade Unit: % - Intercept: 2 m - From: 56 m - To: 58 m - Hole Depth: 150 m - Intercept Depth: 56 m #### Classification - Deposit Type: other - Program: exploration - Sample Type: drill - Group ID: MGRC006:56-58 - Mining Method: underground #### Location - Easting: 281453 - Northing: 8060337 - Elevation: 634 m - Azimuth: 46 ° - Dip: -57 ° - Loc. Confidence: high - Loc. Source: document #### QA/QC - Laboratory: Intertek Minerals Townsville Laboratory and Intertek Genalysis Perth - QA/QC Disclosed: Yes - QP Signed: Yes - QA/QC Methods: standards, blanks, duplicates #### Compositing - Cutoff Grade: 0.1 - Cutoff Unit: % Sn - Dilution Disclosed: Yes - Max Dilution: 2 m #### Review - Needs Review: No - Interp. Status: scored - Historical: No #### Dates - Event date: 2026-10-13T00:00:00.000Z Reasoning: This intercept of 2m at 0.17% Sn is below the weak grade threshold for tin in an underground context, but contributes to the overall mineralization footprint at Stannex. - Positive factor: Part of a maiden drilling program at Stannex Prospect, indicating new discovery - Negative factor: Grade is below the weak threshold for tin in an underground context - Negative factor: Narrow width of 2m - Negative factor: True width not known #### Tags used in scoring **QA/QC Disclosed** Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Why it applies: qaqc\_disclosed is true **Compositing Transparent** Polarity: positive Definition: Cut-off grade and internal dilution rules are clearly stated for reported intervals. Why it applies: cutoff\_grade and internal dilution are both stated **Nearology Play** Polarity: neutral Definition: Value premise rests on proximity to a known deposit rather than own results. Why it applies: proximity is offered as the value premise: "21 initial broadly spaced drill holes were completed at the Stannex Prospect, approximately 1km northeast of the Gilmore" ### MGRC006 [Link to this fact](https://atlas-staging.minestarters.com/news/kob-thick-high-grade-tin-intersected-at-the-mt-garnet-project--9ef8b14b-4cc4-486b-92ee-9b0ec78fa39f#fact-drill-facts-60) Mt Garnet · tungsten #### Identity - Hole ID: MGRC006 - Project: Mt Garnet - Commodity: tungsten - Region: australia\_qld - Reported Region: australia\_qld - Ticker: KOB #### Geometry - Grade: 25 - Grade Unit: ppm - Intercept: 2 m - From: 56 m - To: 58 m - Hole Depth: 150 m - Intercept Depth: 56 m #### Classification - Deposit Type: other - Program: exploration - Sample Type: drill - Group ID: MGRC006:56-58 - Mining Method: underground #### Location - Easting: 281453 - Northing: 8060337 - Elevation: 634 m - Azimuth: 46 ° - Dip: -57 ° - Loc. Confidence: high - Loc. Source: document #### QA/QC - Laboratory: Intertek Minerals Townsville Laboratory and Intertek Genalysis Perth - QA/QC Disclosed: Yes - QP Signed: Yes - QA/QC Methods: standards, blanks, duplicates #### Compositing - Cutoff Grade: 0.1 - Cutoff Unit: % Sn - Dilution Disclosed: Yes - Max Dilution: 2 m #### Review - Needs Review: No - Interp. Status: scored - Historical: No #### Dates - Event date: 2026-10-13T00:00:00.000Z Reasoning: The tungsten grade of 25 ppm over 2m is very low and unlikely to be economic, but is noted as associated mineralization. - Positive factor: Associated mineralization in a new discovery - Negative factor: Very low tungsten grade - Negative factor: True width not known #### Tags used in scoring **QA/QC Disclosed** Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Why it applies: qaqc\_disclosed is true **Compositing Transparent** Polarity: positive Definition: Cut-off grade and internal dilution rules are clearly stated for reported intervals. Why it applies: cutoff\_grade and internal dilution are both stated **Nearology Play** Polarity: neutral Definition: Value premise rests on proximity to a known deposit rather than own results. Why it applies: proximity is offered as the value premise: "21 initial broadly spaced drill holes were completed at the Stannex Prospect, approximately 1km northeast of the Gilmore" ### MGRC006 [Link to this fact](https://atlas-staging.minestarters.com/news/kob-thick-high-grade-tin-intersected-at-the-mt-garnet-project--9ef8b14b-4cc4-486b-92ee-9b0ec78fa39f#fact-drill-facts-61) Mt Garnet · copper #### Identity - Hole ID: MGRC006 - Project: Mt Garnet - Commodity: copper - Region: australia\_qld - Reported Region: australia\_qld - Ticker: KOB #### Geometry - Grade: 0.12 - Grade Unit: % - Intercept: 2 m - From: 56 m - To: 58 m - Hole Depth: 150 m - Intercept Depth: 56 m #### Classification - Deposit Type: other - Program: exploration - Sample Type: drill - Group ID: MGRC006:56-58 - Mining Method: underground #### Location - Easting: 281453 - Northing: 8060337 - Elevation: 634 m - Azimuth: 46 ° - Dip: -57 ° - Loc. Confidence: high - Loc. Source: document #### QA/QC - Laboratory: Intertek Minerals Townsville Laboratory and Intertek Genalysis Perth - QA/QC Disclosed: Yes - QP Signed: Yes - QA/QC Methods: standards, blanks, duplicates #### Compositing - Cutoff Grade: 0.1 - Cutoff Unit: % Sn - Dilution Disclosed: Yes - Max Dilution: 2 m #### Review - Needs Review: No - Interp. Status: scored - Historical: No #### Dates - Event date: 2026-10-13T00:00:00.000Z Reasoning: The copper grade of 0.12% over 2m is a trace amount and not economically significant, but is noted as associated mineralization. - Positive factor: Associated mineralization in a new discovery - Negative factor: Trace copper grade - Negative factor: True width not known #### Tags used in scoring **QA/QC Disclosed** Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Why it applies: qaqc\_disclosed is true **Compositing Transparent** Polarity: positive Definition: Cut-off grade and internal dilution rules are clearly stated for reported intervals. Why it applies: cutoff\_grade and internal dilution are both stated **Nearology Play** Polarity: neutral Definition: Value premise rests on proximity to a known deposit rather than own results. Why it applies: proximity is offered as the value premise: "21 initial broadly spaced drill holes were completed at the Stannex Prospect, approximately 1km northeast of the Gilmore" ### MGRC006 [Link to this fact](https://atlas-staging.minestarters.com/news/kob-thick-high-grade-tin-intersected-at-the-mt-garnet-project--9ef8b14b-4cc4-486b-92ee-9b0ec78fa39f#fact-drill-facts-62) Mt Garnet · zinc #### Identity - Hole ID: MGRC006 - Project: Mt Garnet - Commodity: zinc - Region: australia\_qld - Reported Region: australia\_qld - Ticker: KOB #### Geometry - Grade: 0.76 - Grade Unit: % - Intercept: 2 m - From: 56 m - To: 58 m - Hole Depth: 150 m - Intercept Depth: 56 m #### Classification - Deposit Type: other - Program: exploration - Sample Type: drill - Group ID: MGRC006:56-58 - Mining Method: underground #### Location - Easting: 281453 - Northing: 8060337 - Elevation: 634 m - Azimuth: 46 ° - Dip: -57 ° - Loc. Confidence: high - Loc. Source: document #### QA/QC - Laboratory: Intertek Minerals Townsville Laboratory and Intertek Genalysis Perth - QA/QC Disclosed: Yes - QP Signed: Yes - QA/QC Methods: standards, blanks, duplicates #### Compositing - Cutoff Grade: 0.1 - Cutoff Unit: % Sn - Dilution Disclosed: Yes - Max Dilution: 2 m #### Review - Needs Review: No - Interp. Status: scored - Historical: No #### Dates - Event date: 2026-10-13T00:00:00.000Z Reasoning: The zinc grade of 0.76% over 2m is a weak grade for an underground target, but represents associated mineralization. - Positive factor: Associated mineralization in a new discovery - Negative factor: Weak zinc grade for an underground target - Negative factor: True width not known #### Tags used in scoring **QA/QC Disclosed** Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Why it applies: qaqc\_disclosed is true **Compositing Transparent** Polarity: positive Definition: Cut-off grade and internal dilution rules are clearly stated for reported intervals. Why it applies: cutoff\_grade and internal dilution are both stated **Nearology Play** Polarity: neutral Definition: Value premise rests on proximity to a known deposit rather than own results. Why it applies: proximity is offered as the value premise: "21 initial broadly spaced drill holes were completed at the Stannex Prospect, approximately 1km northeast of the Gilmore" ### MGRC006 [Link to this fact](https://atlas-staging.minestarters.com/news/kob-thick-high-grade-tin-intersected-at-the-mt-garnet-project--9ef8b14b-4cc4-486b-92ee-9b0ec78fa39f#fact-drill-facts-63) Mt Garnet · silver #### Identity - Hole ID: MGRC006 - Project: Mt Garnet - Commodity: silver - Region: australia\_qld - Reported Region: australia\_qld - Ticker: KOB #### Geometry - Grade: 13 - Grade Unit: g/t - Intercept: 2 m - From: 56 m - To: 58 m - Hole Depth: 150 m - Intercept Depth: 56 m #### Classification - Deposit Type: other - Program: exploration - Sample Type: drill - Group ID: MGRC006:56-58 - Mining Method: underground #### Location - Easting: 281453 - Northing: 8060337 - Elevation: 634 m - Azimuth: 46 ° - Dip: -57 ° - Loc. Confidence: high - Loc. Source: document #### QA/QC - Laboratory: Intertek Minerals Townsville Laboratory and Intertek Genalysis Perth - QA/QC Disclosed: Yes - QP Signed: Yes - QA/QC Methods: standards, blanks, duplicates #### Compositing - Cutoff Grade: 0.1 - Cutoff Unit: % Sn - Dilution Disclosed: Yes - Max Dilution: 2 m #### Review - Needs Review: No - Interp. Status: scored - Historical: No #### Dates - Event date: 2026-10-13T00:00:00.000Z Reasoning: The silver grade of 13 g/t over 2m is low for an underground target, and the high detection limit for silver reduces confidence in the reported value. - Positive factor: Associated mineralization in a new discovery - Negative factor: Low silver grade for an underground target - Negative factor: True width not known - Negative factor: High detection limit for silver \(10 g/t\) reduces confidence in reported values #### Tags used in scoring **QA/QC Disclosed** Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Why it applies: qaqc\_disclosed is true **Compositing Transparent** Polarity: positive Definition: Cut-off grade and internal dilution rules are clearly stated for reported intervals. Why it applies: cutoff\_grade and internal dilution are both stated **Nearology Play** Polarity: neutral Definition: Value premise rests on proximity to a known deposit rather than own results. Why it applies: proximity is offered as the value premise: "21 initial broadly spaced drill holes were completed at the Stannex Prospect, approximately 1km northeast of the Gilmore" ### MGRC006 [Link to this fact](https://atlas-staging.minestarters.com/news/kob-thick-high-grade-tin-intersected-at-the-mt-garnet-project--9ef8b14b-4cc4-486b-92ee-9b0ec78fa39f#fact-drill-facts-64) Mt Garnet · indium #### Identity - Hole ID: MGRC006 - Project: Mt Garnet - Commodity: indium - Region: australia\_qld - Reported Region: australia\_qld - Ticker: KOB #### Geometry - Grade: 65.8 - Grade Unit: g/t - Intercept: 2 m - From: 56 m - To: 58 m - Hole Depth: 150 m - Intercept Depth: 56 m #### Classification - Deposit Type: other - Program: exploration - Sample Type: drill - Group ID: MGRC006:56-58 - Mining Method: underground #### Location - Easting: 281453 - Northing: 8060337 - Elevation: 634 m - Azimuth: 46 ° - Dip: -57 ° - Loc. Confidence: high - Loc. Source: document #### QA/QC - Laboratory: Intertek Minerals Townsville Laboratory and Intertek Genalysis Perth - QA/QC Disclosed: Yes - QP Signed: Yes - QA/QC Methods: standards, blanks, duplicates #### Compositing - Cutoff Grade: 0.1 - Cutoff Unit: % Sn - Dilution Disclosed: Yes - Max Dilution: 2 m #### Review - Needs Review: No - Interp. Status: scored - Historical: No #### Dates - Event date: 2026-10-13T00:00:00.000Z Reasoning: The indium grade of 65.8 g/t over 2m is a weak grade for an underground target, but represents associated mineralization. - Positive factor: Associated mineralization in a new discovery - Negative factor: Weak indium grade for an underground target - Negative factor: True width not known #### Tags used in scoring **QA/QC Disclosed** Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Why it applies: qaqc\_disclosed is true **Compositing Transparent** Polarity: positive Definition: Cut-off grade and internal dilution rules are clearly stated for reported intervals. Why it applies: cutoff\_grade and internal dilution are both stated **Nearology Play** Polarity: neutral Definition: Value premise rests on proximity to a known deposit rather than own results. Why it applies: proximity is offered as the value premise: "21 initial broadly spaced drill holes were completed at the Stannex Prospect, approximately 1km northeast of the Gilmore" ### MGRC006 [Link to this fact](https://atlas-staging.minestarters.com/news/kob-thick-high-grade-tin-intersected-at-the-mt-garnet-project--9ef8b14b-4cc4-486b-92ee-9b0ec78fa39f#fact-drill-facts-65) Mt Garnet · tin #### Identity - Hole ID: MGRC006 - Project: Mt Garnet - Commodity: tin - Region: australia\_qld - Reported Region: australia\_qld - Ticker: KOB #### Geometry - Grade: 0.16 - Grade Unit: % - Intercept: 4 m - From: 96 m - To: 100 m - Hole Depth: 150 m - Intercept Depth: 56 m #### Classification - Deposit Type: other - Program: exploration - Sample Type: drill - Group ID: MGRC006:96-100 - Mining Method: underground #### Location - Easting: 281453 - Northing: 8060337 - Elevation: 634 m - Azimuth: 46 ° - Dip: -57 ° - Loc. Confidence: high - Loc. Source: document #### QA/QC - Laboratory: Intertek Minerals Townsville Laboratory and Intertek Genalysis Perth - QA/QC Disclosed: Yes - QP Signed: Yes - QA/QC Methods: standards, blanks, duplicates #### Compositing - Cutoff Grade: 0.1 - Cutoff Unit: % Sn - Dilution Disclosed: Yes - Max Dilution: 2 m #### Review - Needs Review: No - Interp. Status: scored - Historical: No #### Dates - Event date: 2026-10-13T00:00:00.000Z Reasoning: This intercept of 4m at 0.16% Sn is below the weak grade threshold for tin in an underground context, but contributes to the overall mineralization footprint at Stannex. - Positive factor: Part of a maiden drilling program at Stannex Prospect, indicating new discovery - Negative factor: Grade is below the weak threshold for tin in an underground context - Negative factor: True width not known #### Tags used in scoring **QA/QC Disclosed** Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Why it applies: qaqc\_disclosed is true **Compositing Transparent** Polarity: positive Definition: Cut-off grade and internal dilution rules are clearly stated for reported intervals. Why it applies: cutoff\_grade and internal dilution are both stated **Nearology Play** Polarity: neutral Definition: Value premise rests on proximity to a known deposit rather than own results. Why it applies: proximity is offered as the value premise: "21 initial broadly spaced drill holes were completed at the Stannex Prospect, approximately 1km northeast of the Gilmore" ### MGRC006 [Link to this fact](https://atlas-staging.minestarters.com/news/kob-thick-high-grade-tin-intersected-at-the-mt-garnet-project--9ef8b14b-4cc4-486b-92ee-9b0ec78fa39f#fact-drill-facts-66) Mt Garnet · tungsten #### Identity - Hole ID: MGRC006 - Project: Mt Garnet - Commodity: tungsten - Region: australia\_qld - Reported Region: australia\_qld - Ticker: KOB #### Geometry - Grade: 8 - Grade Unit: ppm - Intercept: 4 m - From: 96 m - To: 100 m - Hole Depth: 150 m - Intercept Depth: 56 m #### Classification - Deposit Type: other - Program: exploration - Sample Type: drill - Group ID: MGRC006:96-100 - Mining Method: underground #### Location - Easting: 281453 - Northing: 8060337 - Elevation: 634 m - Azimuth: 46 ° - Dip: -57 ° - Loc. Confidence: high - Loc. Source: document #### QA/QC - Laboratory: Intertek Minerals Townsville Laboratory and Intertek Genalysis Perth - QA/QC Disclosed: Yes - QP Signed: Yes - QA/QC Methods: standards, blanks, duplicates #### Compositing - Cutoff Grade: 0.1 - Cutoff Unit: % Sn - Dilution Disclosed: Yes - Max Dilution: 2 m #### Review - Needs Review: No - Interp. Status: scored - Historical: No #### Dates - Event date: 2026-10-13T00:00:00.000Z Reasoning: The tungsten grade of 8 ppm over 4m is very low and unlikely to be economic, but is noted as associated mineralization. - Positive factor: Associated mineralization in a new discovery - Negative factor: Very low tungsten grade - Negative factor: True width not known #### Tags used in scoring **QA/QC Disclosed** Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Why it applies: qaqc\_disclosed is true **Compositing Transparent** Polarity: positive Definition: Cut-off grade and internal dilution rules are clearly stated for reported intervals. Why it applies: cutoff\_grade and internal dilution are both stated **Nearology Play** Polarity: neutral Definition: Value premise rests on proximity to a known deposit rather than own results. Why it applies: proximity is offered as the value premise: "21 initial broadly spaced drill holes were completed at the Stannex Prospect, approximately 1km northeast of the Gilmore" ### MGRC006 [Link to this fact](https://atlas-staging.minestarters.com/news/kob-thick-high-grade-tin-intersected-at-the-mt-garnet-project--9ef8b14b-4cc4-486b-92ee-9b0ec78fa39f#fact-drill-facts-67) Mt Garnet · copper #### Identity - Hole ID: MGRC006 - Project: Mt Garnet - Commodity: copper - Region: australia\_qld - Reported Region: australia\_qld - Ticker: KOB #### Geometry - Grade: 0 - Grade Unit: % - Intercept: 4 m - From: 96 m - To: 100 m - Hole Depth: 150 m - Intercept Depth: 56 m #### Classification - Deposit Type: other - Program: exploration - Sample Type: drill - Group ID: MGRC006:96-100 - Mining Method: underground #### Location - Easting: 281453 - Northing: 8060337 - Elevation: 634 m - Azimuth: 46 ° - Dip: -57 ° - Loc. Confidence: high - Loc. Source: document #### QA/QC - Laboratory: Intertek Minerals Townsville Laboratory and Intertek Genalysis Perth - QA/QC Disclosed: Yes - QP Signed: Yes - QA/QC Methods: standards, blanks, duplicates #### Compositing - Cutoff Grade: 0.1 - Cutoff Unit: % Sn - Dilution Disclosed: Yes - Max Dilution: 2 m #### Review - Needs Review: No - Interp. Status: scored - Historical: No #### Dates - Event date: 2026-10-13T00:00:00.000Z Reasoning: The copper grade of 0.0% over 4m is a trace amount and not economically significant, but is noted as associated mineralization. - Positive factor: Associated mineralization in a new discovery - Negative factor: Trace copper grade - Negative factor: True width not known #### Tags used in scoring **QA/QC Disclosed** Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Why it applies: qaqc\_disclosed is true **Compositing Transparent** Polarity: positive Definition: Cut-off grade and internal dilution rules are clearly stated for reported intervals. Why it applies: cutoff\_grade and internal dilution are both stated **Nearology Play** Polarity: neutral Definition: Value premise rests on proximity to a known deposit rather than own results. Why it applies: proximity is offered as the value premise: "21 initial broadly spaced drill holes were completed at the Stannex Prospect, approximately 1km northeast of the Gilmore" ### MGRC006 [Link to this fact](https://atlas-staging.minestarters.com/news/kob-thick-high-grade-tin-intersected-at-the-mt-garnet-project--9ef8b14b-4cc4-486b-92ee-9b0ec78fa39f#fact-drill-facts-68) Mt Garnet · zinc #### Identity - Hole ID: MGRC006 - Project: Mt Garnet - Commodity: zinc - Region: australia\_qld - Reported Region: australia\_qld - Ticker: KOB #### Geometry - Grade: 0.04 - Grade Unit: % - Intercept: 4 m - From: 96 m - To: 100 m - Hole Depth: 150 m - Intercept Depth: 56 m #### Classification - Deposit Type: other - Program: exploration - Sample Type: drill - Group ID: MGRC006:96-100 - Mining Method: underground #### Location - Easting: 281453 - Northing: 8060337 - Elevation: 634 m - Azimuth: 46 ° - Dip: -57 ° - Loc. Confidence: high - Loc. Source: document #### QA/QC - Laboratory: Intertek Minerals Townsville Laboratory and Intertek Genalysis Perth - QA/QC Disclosed: Yes - QP Signed: Yes - QA/QC Methods: standards, blanks, duplicates #### Compositing - Cutoff Grade: 0.1 - Cutoff Unit: % Sn - Dilution Disclosed: Yes - Max Dilution: 2 m #### Review - Needs Review: No - Interp. Status: scored - Historical: No #### Dates - Event date: 2026-10-13T00:00:00.000Z Reasoning: The zinc grade of 0.04% over 4m is a trace amount and not economically significant, but is noted as associated mineralization. - Positive factor: Associated mineralization in a new discovery - Negative factor: Trace zinc grade - Negative factor: True width not known #### Tags used in scoring **QA/QC Disclosed** Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Why it applies: qaqc\_disclosed is true **Compositing Transparent** Polarity: positive Definition: Cut-off grade and internal dilution rules are clearly stated for reported intervals. Why it applies: cutoff\_grade and internal dilution are both stated **Nearology Play** Polarity: neutral Definition: Value premise rests on proximity to a known deposit rather than own results. Why it applies: proximity is offered as the value premise: "21 initial broadly spaced drill holes were completed at the Stannex Prospect, approximately 1km northeast of the Gilmore" ### MGRC006 [Link to this fact](https://atlas-staging.minestarters.com/news/kob-thick-high-grade-tin-intersected-at-the-mt-garnet-project--9ef8b14b-4cc4-486b-92ee-9b0ec78fa39f#fact-drill-facts-69) Mt Garnet · silver #### Identity - Hole ID: MGRC006 - Project: Mt Garnet - Commodity: silver - Region: australia\_qld - Reported Region: australia\_qld - Ticker: KOB #### Geometry - Grade: 5 - Grade Unit: g/t - Intercept: 4 m - From: 96 m - To: 100 m - Hole Depth: 150 m - Intercept Depth: 56 m #### Classification - Deposit Type: other - Program: exploration - Sample Type: drill - Group ID: MGRC006:96-100 - Mining Method: underground #### Location - Easting: 281453 - Northing: 8060337 - Elevation: 634 m - Azimuth: 46 ° - Dip: -57 ° - Loc. Confidence: high - Loc. Source: document #### QA/QC - Laboratory: Intertek Minerals Townsville Laboratory and Intertek Genalysis Perth - QA/QC Disclosed: Yes - QP Signed: Yes - QA/QC Methods: standards, blanks, duplicates #### Compositing - Cutoff Grade: 0.1 - Cutoff Unit: % Sn - Dilution Disclosed: Yes - Max Dilution: 2 m #### Review - Needs Review: No - Interp. Status: scored - Historical: No #### Dates - Event date: 2026-10-13T00:00:00.000Z Reasoning: The silver grade of 5 g/t over 4m is a trace amount and not economically significant, and the high detection limit for silver reduces confidence in the reported value. - Positive factor: Associated mineralization in a new discovery - Negative factor: Trace silver grade - Negative factor: True width not known - Negative factor: High detection limit for silver \(10 g/t\) reduces confidence in reported values #### Tags used in scoring **QA/QC Disclosed** Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Why it applies: qaqc\_disclosed is true **Compositing Transparent** Polarity: positive Definition: Cut-off grade and internal dilution rules are clearly stated for reported intervals. Why it applies: cutoff\_grade and internal dilution are both stated **Nearology Play** Polarity: neutral Definition: Value premise rests on proximity to a known deposit rather than own results. Why it applies: proximity is offered as the value premise: "21 initial broadly spaced drill holes were completed at the Stannex Prospect, approximately 1km northeast of the Gilmore" ### MGRC006 [Link to this fact](https://atlas-staging.minestarters.com/news/kob-thick-high-grade-tin-intersected-at-the-mt-garnet-project--9ef8b14b-4cc4-486b-92ee-9b0ec78fa39f#fact-drill-facts-70) Mt Garnet · indium #### Identity - Hole ID: MGRC006 - Project: Mt Garnet - Commodity: indium - Region: australia\_qld - Reported Region: australia\_qld - Ticker: KOB #### Geometry - Grade: 2.4 - Grade Unit: g/t - Intercept: 4 m - From: 96 m - To: 100 m - Hole Depth: 150 m - Intercept Depth: 56 m #### Classification - Deposit Type: other - Program: exploration - Sample Type: drill - Group ID: MGRC006:96-100 - Mining Method: underground #### Location - Easting: 281453 - Northing: 8060337 - Elevation: 634 m - Azimuth: 46 ° - Dip: -57 ° - Loc. Confidence: high - Loc. Source: document #### QA/QC - Laboratory: Intertek Minerals Townsville Laboratory and Intertek Genalysis Perth - QA/QC Disclosed: Yes - QP Signed: Yes - QA/QC Methods: standards, blanks, duplicates #### Compositing - Cutoff Grade: 0.1 - Cutoff Unit: % Sn - Dilution Disclosed: Yes - Max Dilution: 2 m #### Review - Needs Review: No - Interp. Status: scored - Historical: No #### Dates - Event date: 2026-10-13T00:00:00.000Z Reasoning: The indium grade of 2.4 g/t over 4m is a trace amount and not economically significant, but is noted as associated mineralization. - Positive factor: Associated mineralization in a new discovery - Negative factor: Trace indium grade - Negative factor: True width not known #### Tags used in scoring **QA/QC Disclosed** Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Why it applies: qaqc\_disclosed is true **Compositing Transparent** Polarity: positive Definition: Cut-off grade and internal dilution rules are clearly stated for reported intervals. Why it applies: cutoff\_grade and internal dilution are both stated **Nearology Play** Polarity: neutral Definition: Value premise rests on proximity to a known deposit rather than own results. Why it applies: proximity is offered as the value premise: "21 initial broadly spaced drill holes were completed at the Stannex Prospect, approximately 1km northeast of the Gilmore" ### MGRC011 [Link to this fact](https://atlas-staging.minestarters.com/news/kob-thick-high-grade-tin-intersected-at-the-mt-garnet-project--9ef8b14b-4cc4-486b-92ee-9b0ec78fa39f#fact-drill-facts-71) Mt Garnet · tin #### Identity - Hole ID: MGRC011 - Project: Mt Garnet - Commodity: tin - Region: australia\_qld - Reported Region: australia\_qld - Ticker: KOB #### Geometry - Grade: 4.07 - Grade Unit: % - Intercept: 1 m - From: 117 m - To: 118 m - Hole Depth: 162 m - Intercept Depth: 111 m #### Classification - Deposit Type: other - Program: exploration - Sample Type: drill - Group ID: MGRC011:117-118 - Mining Method: underground #### Location - Easting: 279795 - Northing: 8059962 - Elevation: 642 m - Azimuth: 44 ° - Dip: -70 ° - Loc. Confidence: high - Loc. Source: document #### QA/QC - Laboratory: Intertek Minerals Townsville Laboratory and Intertek Genalysis Perth - QA/QC Disclosed: Yes - QP Signed: Yes - QA/QC Methods: standards, blanks, duplicates #### Compositing - Cutoff Grade: 0.4 - Cutoff Unit: % Sn - Dilution Disclosed: Yes - Max Dilution: 2 m #### Review - Needs Review: No - Interp. Status: scored - Historical: No #### Dates - Event date: 2026-10-13T00:00:00.000Z Reasoning: This intercept of 1m at 4.07% Sn is a bonanza-grade result, demonstrating very high-grade tin mineralization comparable to historical production, and significantly exceeding prior best results for the project. - Positive factor: Bonanza grade for tin in an underground context - Positive factor: Significantly higher than the project's prior best grade of 5.2% Sn - Positive factor: Close to historical production grades of 7.6% Sn - Negative factor: Narrow width of 1m - Negative factor: True width not known #### Tags used in scoring **QA/QC Disclosed** Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Why it applies: qaqc\_disclosed is true **Compositing Transparent** Polarity: positive Definition: Cut-off grade and internal dilution rules are clearly stated for reported intervals. Why it applies: cutoff\_grade and internal dilution are both stated **Nearology Play** Polarity: neutral Definition: Value premise rests on proximity to a known deposit rather than own results. Why it applies: proximity is offered as the value premise: "21 initial broadly spaced drill holes were completed at the Stannex Prospect, approximately 1km northeast of the Gilmore" ### MGRC011 [Link to this fact](https://atlas-staging.minestarters.com/news/kob-thick-high-grade-tin-intersected-at-the-mt-garnet-project--9ef8b14b-4cc4-486b-92ee-9b0ec78fa39f#fact-drill-facts-72) Mt Garnet · tungsten #### Identity - Hole ID: MGRC011 - Project: Mt Garnet - Commodity: tungsten - Region: australia\_qld - Reported Region: australia\_qld - Ticker: KOB #### Geometry - Grade: 692 - Grade Unit: ppm - Intercept: 1 m - From: 117 m - To: 118 m - Hole Depth: 162 m - Intercept Depth: 111 m #### Classification - Deposit Type: other - Program: exploration - Sample Type: drill - Group ID: MGRC011:117-118 - Mining Method: underground #### Location - Easting: 279795 - Northing: 8059962 - Elevation: 642 m - Azimuth: 44 ° - Dip: -70 ° - Loc. Confidence: high - Loc. Source: document #### QA/QC - Laboratory: Intertek Minerals Townsville Laboratory and Intertek Genalysis Perth - QA/QC Disclosed: Yes - QP Signed: Yes - QA/QC Methods: standards, blanks, duplicates #### Compositing - Cutoff Grade: 0.4 - Cutoff Unit: % Sn - Dilution Disclosed: Yes - Max Dilution: 2 m #### Review - Needs Review: No - Interp. Status: scored - Historical: No #### Dates - Event date: 2026-10-13T00:00:00.000Z Reasoning: The tungsten grade of 692 ppm over 1m is very low and unlikely to be economic, but is noted as associated mineralization. - Positive factor: Associated mineralization in a new discovery - Negative factor: Very low tungsten grade - Negative factor: True width not known #### Tags used in scoring **QA/QC Disclosed** Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Why it applies: qaqc\_disclosed is true **Compositing Transparent** Polarity: positive Definition: Cut-off grade and internal dilution rules are clearly stated for reported intervals. Why it applies: cutoff\_grade and internal dilution are both stated **Nearology Play** Polarity: neutral Definition: Value premise rests on proximity to a known deposit rather than own results. Why it applies: proximity is offered as the value premise: "21 initial broadly spaced drill holes were completed at the Stannex Prospect, approximately 1km northeast of the Gilmore" ### MGRC011 [Link to this fact](https://atlas-staging.minestarters.com/news/kob-thick-high-grade-tin-intersected-at-the-mt-garnet-project--9ef8b14b-4cc4-486b-92ee-9b0ec78fa39f#fact-drill-facts-73) Mt Garnet · copper #### Identity - Hole ID: MGRC011 - Project: Mt Garnet - Commodity: copper - Region: australia\_qld - Reported Region: australia\_qld - Ticker: KOB #### Geometry - Grade: 0.78 - Grade Unit: % - Intercept: 1 m - From: 117 m - To: 118 m - Hole Depth: 162 m - Intercept Depth: 111 m #### Classification - Deposit Type: other - Program: exploration - Sample Type: drill - Group ID: MGRC011:117-118 - Mining Method: underground #### Location - Easting: 279795 - Northing: 8059962 - Elevation: 642 m - Azimuth: 44 ° - Dip: -70 ° - Loc. Confidence: high - Loc. Source: document #### QA/QC - Laboratory: Intertek Minerals Townsville Laboratory and Intertek Genalysis Perth - QA/QC Disclosed: Yes - QP Signed: Yes - QA/QC Methods: standards, blanks, duplicates #### Compositing - Cutoff Grade: 0.4 - Cutoff Unit: % Sn - Dilution Disclosed: Yes - Max Dilution: 2 m #### Review - Needs Review: No - Interp. Status: scored - Historical: No #### Dates - Event date: 2026-10-13T00:00:00.000Z Reasoning: The copper grade of 0.78% over 1m is a weak grade for an underground target, but represents associated mineralization within a bonanza-grade tin zone. - Positive factor: Associated mineralization in a new discovery - Negative factor: Weak copper grade for an underground target - Negative factor: True width not known #### Tags used in scoring **QA/QC Disclosed** Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Why it applies: qaqc\_disclosed is true **Compositing Transparent** Polarity: positive Definition: Cut-off grade and internal dilution rules are clearly stated for reported intervals. Why it applies: cutoff\_grade and internal dilution are both stated **Nearology Play** Polarity: neutral Definition: Value premise rests on proximity to a known deposit rather than own results. Why it applies: proximity is offered as the value premise: "21 initial broadly spaced drill holes were completed at the Stannex Prospect, approximately 1km northeast of the Gilmore" ### MGRC011 [Link to this fact](https://atlas-staging.minestarters.com/news/kob-thick-high-grade-tin-intersected-at-the-mt-garnet-project--9ef8b14b-4cc4-486b-92ee-9b0ec78fa39f#fact-drill-facts-74) Mt Garnet · zinc #### Identity - Hole ID: MGRC011 - Project: Mt Garnet - Commodity: zinc - Region: australia\_qld - Reported Region: australia\_qld - Ticker: KOB #### Geometry - Grade: 0.56 - Grade Unit: % - Intercept: 1 m - From: 117 m - To: 118 m - Hole Depth: 162 m - Intercept Depth: 111 m #### Classification - Deposit Type: other - Program: exploration - Sample Type: drill - Group ID: MGRC011:117-118 - Mining Method: underground #### Location - Easting: 279795 - Northing: 8059962 - Elevation: 642 m - Azimuth: 44 ° - Dip: -70 ° - Loc. Confidence: high - Loc. Source: document #### QA/QC - Laboratory: Intertek Minerals Townsville Laboratory and Intertek Genalysis Perth - QA/QC Disclosed: Yes - QP Signed: Yes - QA/QC Methods: standards, blanks, duplicates #### Compositing - Cutoff Grade: 0.4 - Cutoff Unit: % Sn - Dilution Disclosed: Yes - Max Dilution: 2 m #### Review - Needs Review: No - Interp. Status: scored - Historical: No #### Dates - Event date: 2026-10-13T00:00:00.000Z Reasoning: The zinc grade of 0.56% over 1m is a weak grade for an underground target, but represents associated mineralization within a bonanza-grade tin zone. - Positive factor: Associated mineralization in a new discovery - Negative factor: Weak zinc grade for an underground target - Negative factor: True width not known #### Tags used in scoring **QA/QC Disclosed** Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Why it applies: qaqc\_disclosed is true **Compositing Transparent** Polarity: positive Definition: Cut-off grade and internal dilution rules are clearly stated for reported intervals. Why it applies: cutoff\_grade and internal dilution are both stated **Nearology Play** Polarity: neutral Definition: Value premise rests on proximity to a known deposit rather than own results. Why it applies: proximity is offered as the value premise: "21 initial broadly spaced drill holes were completed at the Stannex Prospect, approximately 1km northeast of the Gilmore" ### MGRC011 [Link to this fact](https://atlas-staging.minestarters.com/news/kob-thick-high-grade-tin-intersected-at-the-mt-garnet-project--9ef8b14b-4cc4-486b-92ee-9b0ec78fa39f#fact-drill-facts-75) Mt Garnet · silver #### Identity - Hole ID: MGRC011 - Project: Mt Garnet - Commodity: silver - Region: australia\_qld - Reported Region: australia\_qld - Ticker: KOB #### Geometry - Grade: 94 - Grade Unit: g/t - Intercept: 1 m - From: 117 m - To: 118 m - Hole Depth: 162 m - Intercept Depth: 111 m #### Classification - Deposit Type: other - Program: exploration - Sample Type: drill - Group ID: MGRC011:117-118 - Mining Method: underground #### Location - Easting: 279795 - Northing: 8059962 - Elevation: 642 m - Azimuth: 44 ° - Dip: -70 ° - Loc. Confidence: high - Loc. Source: document #### QA/QC - Laboratory: Intertek Minerals Townsville Laboratory and Intertek Genalysis Perth - QA/QC Disclosed: Yes - QP Signed: Yes - QA/QC Methods: standards, blanks, duplicates #### Compositing - Cutoff Grade: 0.4 - Cutoff Unit: % Sn - Dilution Disclosed: Yes - Max Dilution: 2 m #### Review - Needs Review: No - Interp. Status: scored - Historical: No #### Dates - Event date: 2026-10-13T00:00:00.000Z Reasoning: The silver grade of 94 g/t over 1m is a moderate grade for an underground target, representing associated mineralization within a bonanza-grade tin zone, though confidence is reduced by the high detection limit. - Positive factor: Moderate silver grade for an underground target - Positive factor: Associated mineralization in a new discovery - Negative factor: True width not known - Negative factor: High detection limit for silver \(10 g/t\) reduces confidence in reported values #### Tags used in scoring **QA/QC Disclosed** Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Why it applies: qaqc\_disclosed is true **Compositing Transparent** Polarity: positive Definition: Cut-off grade and internal dilution rules are clearly stated for reported intervals. Why it applies: cutoff\_grade and internal dilution are both stated **Nearology Play** Polarity: neutral Definition: Value premise rests on proximity to a known deposit rather than own results. Why it applies: proximity is offered as the value premise: "21 initial broadly spaced drill holes were completed at the Stannex Prospect, approximately 1km northeast of the Gilmore" ### MGRC011 [Link to this fact](https://atlas-staging.minestarters.com/news/kob-thick-high-grade-tin-intersected-at-the-mt-garnet-project--9ef8b14b-4cc4-486b-92ee-9b0ec78fa39f#fact-drill-facts-76) Mt Garnet · indium #### Identity - Hole ID: MGRC011 - Project: Mt Garnet - Commodity: indium - Region: australia\_qld - Reported Region: australia\_qld - Ticker: KOB #### Geometry - Grade: 31.1 - Grade Unit: g/t - Intercept: 1 m - From: 117 m - To: 118 m - Hole Depth: 162 m - Intercept Depth: 111 m #### Classification - Deposit Type: other - Program: exploration - Sample Type: drill - Group ID: MGRC011:117-118 - Mining Method: underground #### Location - Easting: 279795 - Northing: 8059962 - Elevation: 642 m - Azimuth: 44 ° - Dip: -70 ° - Loc. Confidence: high - Loc. Source: document #### QA/QC - Laboratory: Intertek Minerals Townsville Laboratory and Intertek Genalysis Perth - QA/QC Disclosed: Yes - QP Signed: Yes - QA/QC Methods: standards, blanks, duplicates #### Compositing - Cutoff Grade: 0.4 - Cutoff Unit: % Sn - Dilution Disclosed: Yes - Max Dilution: 2 m #### Review - Needs Review: No - Interp. Status: scored - Historical: No #### Dates - Event date: 2026-10-13T00:00:00.000Z Reasoning: The indium grade of 31.1 g/t over 1m is a weak grade for an underground target, but represents associated mineralization within a bonanza-grade tin zone. - Positive factor: Associated mineralization in a new discovery - Negative factor: Weak indium grade for an underground target - Negative factor: True width not known #### Tags used in scoring **QA/QC Disclosed** Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Why it applies: qaqc\_disclosed is true **Compositing Transparent** Polarity: positive Definition: Cut-off grade and internal dilution rules are clearly stated for reported intervals. Why it applies: cutoff\_grade and internal dilution are both stated **Nearology Play** Polarity: neutral Definition: Value premise rests on proximity to a known deposit rather than own results. Why it applies: proximity is offered as the value premise: "21 initial broadly spaced drill holes were completed at the Stannex Prospect, approximately 1km northeast of the Gilmore" ### MGRC011 [Link to this fact](https://atlas-staging.minestarters.com/news/kob-thick-high-grade-tin-intersected-at-the-mt-garnet-project--9ef8b14b-4cc4-486b-92ee-9b0ec78fa39f#fact-drill-facts-77) Mt Garnet · tin #### Identity - Hole ID: MGRC011 - Project: Mt Garnet - Commodity: tin - Region: australia\_qld - Reported Region: australia\_qld - Ticker: KOB #### Geometry - Grade: 8.75 - Grade Unit: % - Intercept: 1 m - From: 126 m - To: 127 m - Hole Depth: 162 m - Intercept Depth: 111 m #### Classification - Deposit Type: other - Program: exploration - Sample Type: drill - Group ID: MGRC011:126-127 - Mining Method: underground #### Location - Easting: 279795 - Northing: 8059962 - Elevation: 642 m - Azimuth: 44 ° - Dip: -70 ° - Loc. Confidence: high - Loc. Source: document #### QA/QC - Laboratory: Intertek Minerals Townsville Laboratory and Intertek Genalysis Perth - QA/QC Disclosed: Yes - QP Signed: Yes - QA/QC Methods: standards, blanks, duplicates #### Compositing - Cutoff Grade: 5 - Cutoff Unit: % Sn - Dilution Disclosed: Yes - Max Dilution: 2 m #### Review - Needs Review: No - Interp. Status: scored - Historical: No #### Dates - Event date: 2026-10-13T00:00:00.000Z Reasoning: This intercept of 1m at 8.75% Sn is an exceptional bonanza-grade result, exceeding historical production grades and significantly higher than prior best results for the project, indicating very high-grade tin mineralization. - Positive factor: Bonanza grade for tin in an underground context - Positive factor: Significantly higher than the project's prior best grade of 5.2% Sn - Positive factor: Exceeds historical production grades of 7.6% Sn - Negative factor: Narrow width of 1m - Negative factor: True width not known #### Tags used in scoring **QA/QC Disclosed** Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Why it applies: qaqc\_disclosed is true **Compositing Transparent** Polarity: positive Definition: Cut-off grade and internal dilution rules are clearly stated for reported intervals. Why it applies: cutoff\_grade and internal dilution are both stated **Nearology Play** Polarity: neutral Definition: Value premise rests on proximity to a known deposit rather than own results. Why it applies: proximity is offered as the value premise: "21 initial broadly spaced drill holes were completed at the Stannex Prospect, approximately 1km northeast of the Gilmore" ### MGRC011 [Link to this fact](https://atlas-staging.minestarters.com/news/kob-thick-high-grade-tin-intersected-at-the-mt-garnet-project--9ef8b14b-4cc4-486b-92ee-9b0ec78fa39f#fact-drill-facts-78) Mt Garnet · tungsten #### Identity - Hole ID: MGRC011 - Project: Mt Garnet - Commodity: tungsten - Region: australia\_qld - Reported Region: australia\_qld - Ticker: KOB #### Geometry - Grade: 204 - Grade Unit: ppm - Intercept: 1 m - From: 126 m - To: 127 m - Hole Depth: 162 m - Intercept Depth: 111 m #### Classification - Deposit Type: other - Program: exploration - Sample Type: drill - Group ID: MGRC011:126-127 - Mining Method: underground #### Location - Easting: 279795 - Northing: 8059962 - Elevation: 642 m - Azimuth: 44 ° - Dip: -70 ° - Loc. Confidence: high - Loc. Source: document #### QA/QC - Laboratory: Intertek Minerals Townsville Laboratory and Intertek Genalysis Perth - QA/QC Disclosed: Yes - QP Signed: Yes - QA/QC Methods: standards, blanks, duplicates #### Compositing - Cutoff Grade: 5 - Cutoff Unit: % Sn - Dilution Disclosed: Yes - Max Dilution: 2 m #### Review - Needs Review: No - Interp. Status: scored - Historical: No #### Dates - Event date: 2026-10-13T00:00:00.000Z Reasoning: The tungsten grade of 204 ppm over 1m is very low and unlikely to be economic, but is noted as associated mineralization. - Positive factor: Associated mineralization in a new discovery - Negative factor: Very low tungsten grade - Negative factor: True width not known #### Tags used in scoring **QA/QC Disclosed** Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Why it applies: qaqc\_disclosed is true **Compositing Transparent** Polarity: positive Definition: Cut-off grade and internal dilution rules are clearly stated for reported intervals. Why it applies: cutoff\_grade and internal dilution are both stated **Nearology Play** Polarity: neutral Definition: Value premise rests on proximity to a known deposit rather than own results. Why it applies: proximity is offered as the value premise: "21 initial broadly spaced drill holes were completed at the Stannex Prospect, approximately 1km northeast of the Gilmore" ### MGRC011 [Link to this fact](https://atlas-staging.minestarters.com/news/kob-thick-high-grade-tin-intersected-at-the-mt-garnet-project--9ef8b14b-4cc4-486b-92ee-9b0ec78fa39f#fact-drill-facts-79) Mt Garnet · copper #### Identity - Hole ID: MGRC011 - Project: Mt Garnet - Commodity: copper - Region: australia\_qld - Reported Region: australia\_qld - Ticker: KOB #### Geometry - Grade: 0.53 - Grade Unit: % - Intercept: 1 m - From: 126 m - To: 127 m - Hole Depth: 162 m - Intercept Depth: 111 m #### Classification - Deposit Type: other - Program: exploration - Sample Type: drill - Group ID: MGRC011:126-127 - Mining Method: underground #### Location - Easting: 279795 - Northing: 8059962 - Elevation: 642 m - Azimuth: 44 ° - Dip: -70 ° - Loc. Confidence: high - Loc. Source: document #### QA/QC - Laboratory: Intertek Minerals Townsville Laboratory and Intertek Genalysis Perth - QA/QC Disclosed: Yes - QP Signed: Yes - QA/QC Methods: standards, blanks, duplicates #### Compositing - Cutoff Grade: 5 - Cutoff Unit: % Sn - Dilution Disclosed: Yes - Max Dilution: 2 m #### Review - Needs Review: No - Interp. Status: scored - Historical: No #### Dates - Event date: 2026-10-13T00:00:00.000Z Reasoning: The copper grade of 0.53% over 1m is a weak grade for an underground target, but represents associated mineralization within a bonanza-grade tin zone. - Positive factor: Associated mineralization in a new discovery - Negative factor: Weak copper grade for an underground target - Negative factor: True width not known #### Tags used in scoring **QA/QC Disclosed** Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Why it applies: qaqc\_disclosed is true **Compositing Transparent** Polarity: positive Definition: Cut-off grade and internal dilution rules are clearly stated for reported intervals. Why it applies: cutoff\_grade and internal dilution are both stated **Nearology Play** Polarity: neutral Definition: Value premise rests on proximity to a known deposit rather than own results. Why it applies: proximity is offered as the value premise: "21 initial broadly spaced drill holes were completed at the Stannex Prospect, approximately 1km northeast of the Gilmore" ### MGRC011 [Link to this fact](https://atlas-staging.minestarters.com/news/kob-thick-high-grade-tin-intersected-at-the-mt-garnet-project--9ef8b14b-4cc4-486b-92ee-9b0ec78fa39f#fact-drill-facts-80) Mt Garnet · zinc #### Identity - Hole ID: MGRC011 - Project: Mt Garnet - Commodity: zinc - Region: australia\_qld - Reported Region: australia\_qld - Ticker: KOB #### Geometry - Grade: 0.27 - Grade Unit: % - Intercept: 1 m - From: 126 m - To: 127 m - Hole Depth: 162 m - Intercept Depth: 111 m #### Classification - Deposit Type: other - Program: exploration - Sample Type: drill - Group ID: MGRC011:126-127 - Mining Method: underground #### Location - Easting: 279795 - Northing: 8059962 - Elevation: 642 m - Azimuth: 44 ° - Dip: -70 ° - Loc. Confidence: high - Loc. Source: document #### QA/QC - Laboratory: Intertek Minerals Townsville Laboratory and Intertek Genalysis Perth - QA/QC Disclosed: Yes - QP Signed: Yes - QA/QC Methods: standards, blanks, duplicates #### Compositing - Cutoff Grade: 5 - Cutoff Unit: % Sn - Dilution Disclosed: Yes - Max Dilution: 2 m #### Review - Needs Review: No - Interp. Status: scored - Historical: No #### Dates - Event date: 2026-10-13T00:00:00.000Z Reasoning: The zinc grade of 0.27% over 1m is a trace amount and not economically significant, but is noted as associated mineralization. - Positive factor: Associated mineralization in a new discovery - Negative factor: Trace zinc grade - Negative factor: True width not known #### Tags used in scoring **QA/QC Disclosed** Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Why it applies: qaqc\_disclosed is true **Compositing Transparent** Polarity: positive Definition: Cut-off grade and internal dilution rules are clearly stated for reported intervals. Why it applies: cutoff\_grade and internal dilution are both stated **Nearology Play** Polarity: neutral Definition: Value premise rests on proximity to a known deposit rather than own results. Why it applies: proximity is offered as the value premise: "21 initial broadly spaced drill holes were completed at the Stannex Prospect, approximately 1km northeast of the Gilmore" ### MGRC011 [Link to this fact](https://atlas-staging.minestarters.com/news/kob-thick-high-grade-tin-intersected-at-the-mt-garnet-project--9ef8b14b-4cc4-486b-92ee-9b0ec78fa39f#fact-drill-facts-81) Mt Garnet · silver #### Identity - Hole ID: MGRC011 - Project: Mt Garnet - Commodity: silver - Region: australia\_qld - Reported Region: australia\_qld - Ticker: KOB #### Geometry - Grade: 34 - Grade Unit: g/t - Intercept: 1 m - From: 126 m - To: 127 m - Hole Depth: 162 m - Intercept Depth: 111 m #### Classification - Deposit Type: other - Program: exploration - Sample Type: drill - Group ID: MGRC011:126-127 - Mining Method: underground #### Location - Easting: 279795 - Northing: 8059962 - Elevation: 642 m - Azimuth: 44 ° - Dip: -70 ° - Loc. Confidence: high - Loc. Source: document #### QA/QC - Laboratory: Intertek Minerals Townsville Laboratory and Intertek Genalysis Perth - QA/QC Disclosed: Yes - QP Signed: Yes - QA/QC Methods: standards, blanks, duplicates #### Compositing - Cutoff Grade: 5 - Cutoff Unit: % Sn - Dilution Disclosed: Yes - Max Dilution: 2 m #### Review - Needs Review: No - Interp. Status: scored - Historical: No #### Dates - Event date: 2026-10-13T00:00:00.000Z Reasoning: The silver grade of 34 g/t over 1m is low for an underground target, and the high detection limit for silver reduces confidence in the reported value. - Positive factor: Associated mineralization in a new discovery - Negative factor: Low silver grade for an underground target - Negative factor: True width not known - Negative factor: High detection limit for silver \(10 g/t\) reduces confidence in reported values #### Tags used in scoring **QA/QC Disclosed** Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Why it applies: qaqc\_disclosed is true **Compositing Transparent** Polarity: positive Definition: Cut-off grade and internal dilution rules are clearly stated for reported intervals. Why it applies: cutoff\_grade and internal dilution are both stated **Nearology Play** Polarity: neutral Definition: Value premise rests on proximity to a known deposit rather than own results. Why it applies: proximity is offered as the value premise: "21 initial broadly spaced drill holes were completed at the Stannex Prospect, approximately 1km northeast of the Gilmore" ### MGRC011 [Link to this fact](https://atlas-staging.minestarters.com/news/kob-thick-high-grade-tin-intersected-at-the-mt-garnet-project--9ef8b14b-4cc4-486b-92ee-9b0ec78fa39f#fact-drill-facts-82) Mt Garnet · indium #### Identity - Hole ID: MGRC011 - Project: Mt Garnet - Commodity: indium - Region: australia\_qld - Reported Region: australia\_qld - Ticker: KOB #### Geometry - Grade: 13 - Grade Unit: g/t - Intercept: 1 m - From: 126 m - To: 127 m - Hole Depth: 162 m - Intercept Depth: 111 m #### Classification - Deposit Type: other - Program: exploration - Sample Type: drill - Group ID: MGRC011:126-127 - Mining Method: underground #### Location - Easting: 279795 - Northing: 8059962 - Elevation: 642 m - Azimuth: 44 ° - Dip: -70 ° - Loc. Confidence: high - Loc. Source: document #### QA/QC - Laboratory: Intertek Minerals Townsville Laboratory and Intertek Genalysis Perth - QA/QC Disclosed: Yes - QP Signed: Yes - QA/QC Methods: standards, blanks, duplicates #### Compositing - Cutoff Grade: 5 - Cutoff Unit: % Sn - Dilution Disclosed: Yes - Max Dilution: 2 m #### Review - Needs Review: No - Interp. Status: scored - Historical: No #### Dates - Event date: 2026-10-13T00:00:00.000Z Reasoning: The indium grade of 13.0 g/t over 1m is a trace amount and not economically significant, but is noted as associated mineralization. - Positive factor: Associated mineralization in a new discovery - Negative factor: Trace indium grade - Negative factor: True width not known #### Tags used in scoring **QA/QC Disclosed** Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Why it applies: qaqc\_disclosed is true **Compositing Transparent** Polarity: positive Definition: Cut-off grade and internal dilution rules are clearly stated for reported intervals. Why it applies: cutoff\_grade and internal dilution are both stated **Nearology Play** Polarity: neutral Definition: Value premise rests on proximity to a known deposit rather than own results. Why it applies: proximity is offered as the value premise: "21 initial broadly spaced drill holes were completed at the Stannex Prospect, approximately 1km northeast of the Gilmore" ### MGRC011 [Link to this fact](https://atlas-staging.minestarters.com/news/kob-thick-high-grade-tin-intersected-at-the-mt-garnet-project--9ef8b14b-4cc4-486b-92ee-9b0ec78fa39f#fact-drill-facts-83) Mt Garnet · tin #### Identity - Hole ID: MGRC011 - Project: Mt Garnet - Commodity: tin - Region: australia\_qld - Reported Region: australia\_qld - Ticker: KOB #### Geometry - Grade: 3 - Grade Unit: % - Intercept: 2 m - From: 130 m - To: 132 m - Hole Depth: 162 m - Intercept Depth: 111 m #### Classification - Deposit Type: other - Program: exploration - Sample Type: drill - Group ID: MGRC011:130-132 - Mining Method: underground #### Location - Easting: 279795 - Northing: 8059962 - Elevation: 642 m - Azimuth: 44 ° - Dip: -70 ° - Loc. Confidence: high - Loc. Source: document #### QA/QC - Laboratory: Intertek Minerals Townsville Laboratory and Intertek Genalysis Perth - QA/QC Disclosed: Yes - QP Signed: Yes - QA/QC Methods: standards, blanks, duplicates #### Compositing - Cutoff Grade: 2 - Cutoff Unit: % Sn - Dilution Disclosed: Yes - Max Dilution: 2 m #### Review - Needs Review: No - Interp. Status: scored - Historical: No #### Dates - Event date: 2026-10-13T00:00:00.000Z Reasoning: This intercept of 2m at 3.00% Sn is an exceptional-grade result, demonstrating very high-grade tin mineralization significantly exceeding prior best results for the project. - Positive factor: Exceptional grade for tin in an underground context - Positive factor: Significantly higher than the project's prior best grade of 5.2% Sn - Negative factor: Narrow width of 2m - Negative factor: True width not known #### Tags used in scoring **QA/QC Disclosed** Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Why it applies: qaqc\_disclosed is true **Compositing Transparent** Polarity: positive Definition: Cut-off grade and internal dilution rules are clearly stated for reported intervals. Why it applies: cutoff\_grade and internal dilution are both stated **Nearology Play** Polarity: neutral Definition: Value premise rests on proximity to a known deposit rather than own results. Why it applies: proximity is offered as the value premise: "21 initial broadly spaced drill holes were completed at the Stannex Prospect, approximately 1km northeast of the Gilmore" ### MGRC011 [Link to this fact](https://atlas-staging.minestarters.com/news/kob-thick-high-grade-tin-intersected-at-the-mt-garnet-project--9ef8b14b-4cc4-486b-92ee-9b0ec78fa39f#fact-drill-facts-84) Mt Garnet · tungsten #### Identity - Hole ID: MGRC011 - Project: Mt Garnet - Commodity: tungsten - Region: australia\_qld - Reported Region: australia\_qld - Ticker: KOB #### Geometry - Grade: 571 - Grade Unit: ppm - Intercept: 2 m - From: 130 m - To: 132 m - Hole Depth: 162 m - Intercept Depth: 111 m #### Classification - Deposit Type: other - Program: exploration - Sample Type: drill - Group ID: MGRC011:130-132 - Mining Method: underground #### Location - Easting: 279795 - Northing: 8059962 - Elevation: 642 m - Azimuth: 44 ° - Dip: -70 ° - Loc. Confidence: high - Loc. Source: document #### QA/QC - Laboratory: Intertek Minerals Townsville Laboratory and Intertek Genalysis Perth - QA/QC Disclosed: Yes - QP Signed: Yes - QA/QC Methods: standards, blanks, duplicates #### Compositing - Cutoff Grade: 2 - Cutoff Unit: % Sn - Dilution Disclosed: Yes - Max Dilution: 2 m #### Review - Needs Review: No - Interp. Status: scored - Historical: No #### Dates - Event date: 2026-10-13T00:00:00.000Z Reasoning: The tungsten grade of 571 ppm over 2m is very low and unlikely to be economic, but is noted as associated mineralization. - Positive factor: Associated mineralization in a new discovery - Negative factor: Very low tungsten grade - Negative factor: True width not known #### Tags used in scoring **QA/QC Disclosed** Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Why it applies: qaqc\_disclosed is true **Compositing Transparent** Polarity: positive Definition: Cut-off grade and internal dilution rules are clearly stated for reported intervals. Why it applies: cutoff\_grade and internal dilution are both stated **Nearology Play** Polarity: neutral Definition: Value premise rests on proximity to a known deposit rather than own results. Why it applies: proximity is offered as the value premise: "21 initial broadly spaced drill holes were completed at the Stannex Prospect, approximately 1km northeast of the Gilmore" ### MGRC011 [Link to this fact](https://atlas-staging.minestarters.com/news/kob-thick-high-grade-tin-intersected-at-the-mt-garnet-project--9ef8b14b-4cc4-486b-92ee-9b0ec78fa39f#fact-drill-facts-85) Mt Garnet · copper #### Identity - Hole ID: MGRC011 - Project: Mt Garnet - Commodity: copper - Region: australia\_qld - Reported Region: australia\_qld - Ticker: KOB #### Geometry - Grade: 1.16 - Grade Unit: % - Intercept: 2 m - From: 130 m - To: 132 m - Hole Depth: 162 m - Intercept Depth: 111 m #### Classification - Deposit Type: other - Program: exploration - Sample Type: drill - Group ID: MGRC011:130-132 - Mining Method: underground #### Location - Easting: 279795 - Northing: 8059962 - Elevation: 642 m - Azimuth: 44 ° - Dip: -70 ° - Loc. Confidence: high - Loc. Source: document #### QA/QC - Laboratory: Intertek Minerals Townsville Laboratory and Intertek Genalysis Perth - QA/QC Disclosed: Yes - QP Signed: Yes - QA/QC Methods: standards, blanks, duplicates #### Compositing - Cutoff Grade: 2 - Cutoff Unit: % Sn - Dilution Disclosed: Yes - Max Dilution: 2 m #### Review - Needs Review: No - Interp. Status: scored - Historical: No #### Dates - Event date: 2026-10-13T00:00:00.000Z Reasoning: The copper grade of 1.16% over 2m is a moderate grade for an underground target, representing associated mineralization within a high-grade tin zone. - Positive factor: Moderate copper grade for an underground target - Positive factor: Associated mineralization in a new discovery - Negative factor: True width not known #### Tags used in scoring **QA/QC Disclosed** Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Why it applies: qaqc\_disclosed is true **Compositing Transparent** Polarity: positive Definition: Cut-off grade and internal dilution rules are clearly stated for reported intervals. Why it applies: cutoff\_grade and internal dilution are both stated **Nearology Play** Polarity: neutral Definition: Value premise rests on proximity to a known deposit rather than own results. Why it applies: proximity is offered as the value premise: "21 initial broadly spaced drill holes were completed at the Stannex Prospect, approximately 1km northeast of the Gilmore" ### MGRC011 [Link to this fact](https://atlas-staging.minestarters.com/news/kob-thick-high-grade-tin-intersected-at-the-mt-garnet-project--9ef8b14b-4cc4-486b-92ee-9b0ec78fa39f#fact-drill-facts-86) Mt Garnet · zinc #### Identity - Hole ID: MGRC011 - Project: Mt Garnet - Commodity: zinc - Region: australia\_qld - Reported Region: australia\_qld - Ticker: KOB #### Geometry - Grade: 0.65 - Grade Unit: % - Intercept: 2 m - From: 130 m - To: 132 m - Hole Depth: 162 m - Intercept Depth: 111 m #### Classification - Deposit Type: other - Program: exploration - Sample Type: drill - Group ID: MGRC011:130-132 - Mining Method: underground #### Location - Easting: 279795 - Northing: 8059962 - Elevation: 642 m - Azimuth: 44 ° - Dip: -70 ° - Loc. Confidence: high - Loc. Source: document #### QA/QC - Laboratory: Intertek Minerals Townsville Laboratory and Intertek Genalysis Perth - QA/QC Disclosed: Yes - QP Signed: Yes - QA/QC Methods: standards, blanks, duplicates #### Compositing - Cutoff Grade: 2 - Cutoff Unit: % Sn - Dilution Disclosed: Yes - Max Dilution: 2 m #### Review - Needs Review: No - Interp. Status: scored - Historical: No #### Dates - Event date: 2026-10-13T00:00:00.000Z Reasoning: The zinc grade of 0.65% over 2m is a weak grade for an underground target, but represents associated mineralization within a high-grade tin zone. - Positive factor: Associated mineralization in a new discovery - Negative factor: Weak zinc grade for an underground target - Negative factor: True width not known #### Tags used in scoring **QA/QC Disclosed** Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Why it applies: qaqc\_disclosed is true **Compositing Transparent** Polarity: positive Definition: Cut-off grade and internal dilution rules are clearly stated for reported intervals. Why it applies: cutoff\_grade and internal dilution are both stated **Nearology Play** Polarity: neutral Definition: Value premise rests on proximity to a known deposit rather than own results. Why it applies: proximity is offered as the value premise: "21 initial broadly spaced drill holes were completed at the Stannex Prospect, approximately 1km northeast of the Gilmore" ### MGRC011 [Link to this fact](https://atlas-staging.minestarters.com/news/kob-thick-high-grade-tin-intersected-at-the-mt-garnet-project--9ef8b14b-4cc4-486b-92ee-9b0ec78fa39f#fact-drill-facts-87) Mt Garnet · silver #### Identity - Hole ID: MGRC011 - Project: Mt Garnet - Commodity: silver - Region: australia\_qld - Reported Region: australia\_qld - Ticker: KOB #### Geometry - Grade: 53 - Grade Unit: g/t - Intercept: 2 m - From: 130 m - To: 132 m - Hole Depth: 162 m - Intercept Depth: 111 m #### Classification - Deposit Type: other - Program: exploration - Sample Type: drill - Group ID: MGRC011:130-132 - Mining Method: underground #### Location - Easting: 279795 - Northing: 8059962 - Elevation: 642 m - Azimuth: 44 ° - Dip: -70 ° - Loc. Confidence: high - Loc. Source: document #### QA/QC - Laboratory: Intertek Minerals Townsville Laboratory and Intertek Genalysis Perth - QA/QC Disclosed: Yes - QP Signed: Yes - QA/QC Methods: standards, blanks, duplicates #### Compositing - Cutoff Grade: 2 - Cutoff Unit: % Sn - Dilution Disclosed: Yes - Max Dilution: 2 m #### Review - Needs Review: No - Interp. Status: scored - Historical: No #### Dates - Event date: 2026-10-13T00:00:00.000Z Reasoning: The silver grade of 53 g/t over 2m is a weak grade for an underground target, representing associated mineralization within a high-grade tin zone, though confidence is reduced by the high detection limit. - Positive factor: Weak silver grade for an underground target - Positive factor: Associated mineralization in a new discovery - Negative factor: True width not known - Negative factor: High detection limit for silver \(10 g/t\) reduces confidence in reported values #### Tags used in scoring **QA/QC Disclosed** Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Why it applies: qaqc\_disclosed is true **Compositing Transparent** Polarity: positive Definition: Cut-off grade and internal dilution rules are clearly stated for reported intervals. Why it applies: cutoff\_grade and internal dilution are both stated **Nearology Play** Polarity: neutral Definition: Value premise rests on proximity to a known deposit rather than own results. Why it applies: proximity is offered as the value premise: "21 initial broadly spaced drill holes were completed at the Stannex Prospect, approximately 1km northeast of the Gilmore" ### MGRC011 [Link to this fact](https://atlas-staging.minestarters.com/news/kob-thick-high-grade-tin-intersected-at-the-mt-garnet-project--9ef8b14b-4cc4-486b-92ee-9b0ec78fa39f#fact-drill-facts-88) Mt Garnet · indium #### Identity - Hole ID: MGRC011 - Project: Mt Garnet - Commodity: indium - Region: australia\_qld - Reported Region: australia\_qld - Ticker: KOB #### Geometry - Grade: 34.6 - Grade Unit: g/t - Intercept: 2 m - From: 130 m - To: 132 m - Hole Depth: 162 m - Intercept Depth: 111 m #### Classification - Deposit Type: other - Program: exploration - Sample Type: drill - Group ID: MGRC011:130-132 - Mining Method: underground #### Location - Easting: 279795 - Northing: 8059962 - Elevation: 642 m - Azimuth: 44 ° - Dip: -70 ° - Loc. Confidence: high - Loc. Source: document #### QA/QC - Laboratory: Intertek Minerals Townsville Laboratory and Intertek Genalysis Perth - QA/QC Disclosed: Yes - QP Signed: Yes - QA/QC Methods: standards, blanks, duplicates #### Compositing - Cutoff Grade: 2 - Cutoff Unit: % Sn - Dilution Disclosed: Yes - Max Dilution: 2 m #### Review - Needs Review: No - Interp. Status: scored - Historical: No #### Dates - Event date: 2026-10-13T00:00:00.000Z Reasoning: The indium grade of 34.6 g/t over 2m is a weak grade for an underground target, but represents associated mineralization within a high-grade tin zone. - Positive factor: Associated mineralization in a new discovery - Negative factor: Weak indium grade for an underground target - Negative factor: True width not known #### Tags used in scoring **QA/QC Disclosed** Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Why it applies: qaqc\_disclosed is true **Compositing Transparent** Polarity: positive Definition: Cut-off grade and internal dilution rules are clearly stated for reported intervals. Why it applies: cutoff\_grade and internal dilution are both stated **Nearology Play** Polarity: neutral Definition: Value premise rests on proximity to a known deposit rather than own results. Why it applies: proximity is offered as the value premise: "21 initial broadly spaced drill holes were completed at the Stannex Prospect, approximately 1km northeast of the Gilmore" ## How Atlas produces this analysis Minestarters Atlas uses automated extraction to summarize mining announcements, identify reported measurements, and classify supporting evidence. Sentiment reflects the extracted narrative and classification rules; it is an interpretation, not a reported measurement. Evidence quotes and context are provided where available. Missing data, low-confidence results, and review flags indicate limitations. Check the original publisher announcement before relying on an interpretation.