KOB: Thick, High-Grade Tin Intersected at the Mt Garnet Project

Original announcement by asx on Oct 13, 2026

Bullish

Company: Koba Resources Limited
Ticker: KOB
Exchange: ASX
Region: North Queensland
Primary commodity: Tin
Secondary commodities: Copper, Tungsten, Silver, Zinc, Lead, Indium
Document categories: Drill results
Extracted: 2026-10-13 22:32:56 UTC

Atlas analysis published: Oct 13, 2026

Minestarters Atlas analysis

Summary

Koba Resources Limited announced exceptional high-grade tin intersections from its maiden RC drilling program at the Mt Garnet Tin-Tungsten Project in North Queensland. Highlights include 29m at 1.17% Sn, with higher-grade zones up to 8.75% Sn, demonstrating significant mineralization potential. The company plans follow-up infill and extensional drilling to further define the extent of these discoveries.

Reasoning: Koba Resources' maiden drilling at Mt Garnet delivered exceptional high-grade tin intercepts, including 8.75% Sn over 1m and 6.34% Sn over 2m, which are well above previous best results for the project. The discovery of broad mineralization (29m @ 1.17% Sn) and the potential for strike extensions highlight significant project upside. While true widths are not known and some associated metal grades are lower than historical RAG comparables, the overall results are highly positive for an early-stage exploration program.

Positive factors

Exceptional high-grade tin intercepts, significantly exceeding prior best results for the project
Broad widths of tin mineralization, indicating potential for significant resource scale
Maiden drilling program successfully identified new mineralization and extended known zones
Strong associated copper, tungsten, and silver mineralization adds potential value
Comprehensive QA/QC procedures disclosed, including certified lab and QP sign-off

Negative factors

True widths are not yet known, which may overstate reported intercept lengths
Silver detection limit of 10 g/t is high for the mineralized system, potentially understating silver grades
Tungsten, copper, and silver grades are significantly lower than some historical RAG comparables, though these comparables might be outliers or from different contexts

Facts used in scoring: 89

Extracted facts

Stored fact records: 89. Some facts used in scoring do not have a stored record.

Drill Results (89)

MGRC011Mt Garnet · tinGrade: 1.17Grade Unit: %Intercept: 29 mView all details

Link to this fact

Identity

Hole ID: MGRC011
Project: Mt Garnet
Commodity: tin
Region: australia_qld
Reported Region: australia_qld
Ticker: KOB

Geometry

Grade: 1.17
Grade Unit: %
Intercept: 29 m
From: 111 m
To: 140 m
Hole Depth: 162 m
Intercept Depth: 111 m

Classification

Deposit Type: other
Program: exploration
Sample Type: drill
Group ID: MGRC011:111-140
Mining Method: underground

Location

Easting: 279795
Northing: 8059962
Elevation: 642 m
Azimuth: 44 °
Dip: -70 °
Loc. Confidence: high
Loc. Source: document

QA/QC

Laboratory: Intertek Minerals Townsville Laboratory and Intertek Genalysis Perth
QA/QC Disclosed: Yes
QP Signed: Yes
QA/QC Methods: standards, blanks, duplicates

Compositing

Cutoff Grade: 0.1
Cutoff Unit: % Sn
Dilution Disclosed: Yes
Max Dilution: 2 m

Review

Needs Review: No
Interp. Status: scored
Historical: No

Dates

Event date: 2026-10-13T00:00:00.000Z

Reasoning: A 29m intercept at 1.17% Sn is a good result for a maiden drilling program, indicating significant width of mineralization, though the grade is moderate for an underground target.

Positive factors

Moderate grade for tin in an underground context
Continuous width of 29m is significant
Part of a maiden drilling program, indicating high novelty

Negative factors

True width not known

Tags used in scoring

QA/QC Disclosedpositive

Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).

Why it applies: qaqc_disclosed is true

Compositing Transparentpositive

Cut-off grade and internal dilution rules are clearly stated for reported intervals.

Why it applies: cutoff_grade and internal dilution are both stated

Nearology Playneutral

Value premise rests on proximity to a known deposit rather than own results.

Why it applies: proximity is offered as the value premise: "21 initial broadly spaced drill holes were completed at the Stannex Prospect, approximately 1km northeast of the Gilmore"

MGRC011Mt Garnet · copperGrade: 0.36Grade Unit: %Intercept: 29 mView all details

Link to this fact

Identity

Hole ID: MGRC011
Project: Mt Garnet
Commodity: copper
Region: australia_qld
Reported Region: australia_qld
Ticker: KOB

Geometry

Grade: 0.36
Grade Unit: %
Intercept: 29 m
From: 111 m
To: 140 m
Hole Depth: 162 m
Intercept Depth: 111 m

Classification

Deposit Type: other
Program: exploration
Sample Type: drill
Group ID: MGRC011:111-140
Mining Method: underground

Location

Easting: 279795
Northing: 8059962
Elevation: 642 m
Azimuth: 44 °
Dip: -70 °
Loc. Confidence: high
Loc. Source: document

QA/QC

Laboratory: Intertek Minerals Townsville Laboratory and Intertek Genalysis Perth
QA/QC Disclosed: Yes
QP Signed: Yes
QA/QC Methods: standards, blanks, duplicates

Compositing

Cutoff Grade: 0.1
Cutoff Unit: % Sn
Dilution Disclosed: Yes
Max Dilution: 2 m

Review

Needs Review: No
Interp. Status: scored
Historical: No

Dates

Event date: 2026-10-13T00:00:00.000Z

Reasoning: The copper grade of 0.36% over 29m is low for an underground target, but represents associated mineralization in a new discovery.

Positive factors

Associated mineralization in a new discovery

Negative factors

Low copper grade for an underground target
True width not known

Tags used in scoring

QA/QC Disclosedpositive

Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).

Why it applies: qaqc_disclosed is true

Compositing Transparentpositive

Cut-off grade and internal dilution rules are clearly stated for reported intervals.

Why it applies: cutoff_grade and internal dilution are both stated

Nearology Playneutral

Value premise rests on proximity to a known deposit rather than own results.

Why it applies: proximity is offered as the value premise: "21 initial broadly spaced drill holes were completed at the Stannex Prospect, approximately 1km northeast of the Gilmore"

MGRC011Mt Garnet · tungstenGrade: 0.017Grade Unit: %Intercept: 29 mView all details

Link to this fact

Identity

Hole ID: MGRC011
Project: Mt Garnet
Commodity: tungsten
Region: australia_qld
Reported Region: australia_qld
Ticker: KOB

Geometry

Grade: 0.017
Grade Unit: %
Intercept: 29 m
From: 111 m
To: 140 m
Hole Depth: 162 m
Intercept Depth: 111 m

Classification

Deposit Type: other
Program: exploration
Sample Type: drill
Group ID: MGRC011:111-140
Mining Method: underground

Location

Easting: 279795
Northing: 8059962
Elevation: 642 m
Azimuth: 44 °
Dip: -70 °
Loc. Confidence: high
Loc. Source: document

QA/QC

Laboratory: Intertek Minerals Townsville Laboratory and Intertek Genalysis Perth
QA/QC Disclosed: Yes
QP Signed: Yes
QA/QC Methods: standards, blanks, duplicates

Compositing

Cutoff Grade: 0.1
Cutoff Unit: % Sn
Dilution Disclosed: Yes
Max Dilution: 2 m

Review

Needs Review: No
Interp. Status: scored
Historical: No

Dates

Event date: 2026-10-13T00:00:00.000Z

Reasoning: The tungsten grade of 0.017% (170 ppm) over 29m is very low and unlikely to be economic, but is noted as associated mineralization.

Positive factors

Associated mineralization in a new discovery

Negative factors

Very low tungsten grade
True width not known

Tags used in scoring

QA/QC Disclosedpositive

Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).

Why it applies: qaqc_disclosed is true

Compositing Transparentpositive

Cut-off grade and internal dilution rules are clearly stated for reported intervals.

Why it applies: cutoff_grade and internal dilution are both stated

Nearology Playneutral

Value premise rests on proximity to a known deposit rather than own results.

Why it applies: proximity is offered as the value premise: "21 initial broadly spaced drill holes were completed at the Stannex Prospect, approximately 1km northeast of the Gilmore"

MGRC011Mt Garnet · silverGrade: 22Grade Unit: g/tIntercept: 29 mView all details

Link to this fact

Identity

Hole ID: MGRC011
Project: Mt Garnet
Commodity: silver
Region: australia_qld
Reported Region: australia_qld
Ticker: KOB

Geometry

Grade: 22
Grade Unit: g/t
Intercept: 29 m
From: 111 m
To: 140 m
Hole Depth: 162 m
Intercept Depth: 111 m

Classification

Deposit Type: other
Program: exploration
Sample Type: drill
Group ID: MGRC011:111-140
Mining Method: underground

Location

Easting: 279795
Northing: 8059962
Elevation: 642 m
Azimuth: 44 °
Dip: -70 °
Loc. Confidence: high
Loc. Source: document

QA/QC

Laboratory: Intertek Minerals Townsville Laboratory and Intertek Genalysis Perth
QA/QC Disclosed: Yes
QP Signed: Yes
QA/QC Methods: standards, blanks, duplicates

Compositing

Cutoff Grade: 0.1
Cutoff Unit: % Sn
Dilution Disclosed: Yes
Max Dilution: 2 m

Review

Needs Review: No
Interp. Status: scored
Historical: No

Dates

Event date: 2026-10-13T00:00:00.000Z

Reasoning: The silver grade of 22 g/t over 29m is low for an underground target, and the high detection limit for silver reduces confidence in the reported value.

Positive factors

Associated mineralization in a new discovery

Negative factors

Low silver grade for an underground target
True width not known
High detection limit for silver (10 g/t) reduces confidence in reported values

Tags used in scoring

QA/QC Disclosedpositive

Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).

Why it applies: qaqc_disclosed is true

Compositing Transparentpositive

Cut-off grade and internal dilution rules are clearly stated for reported intervals.

Why it applies: cutoff_grade and internal dilution are both stated

Nearology Playneutral

Value premise rests on proximity to a known deposit rather than own results.

Why it applies: proximity is offered as the value premise: "21 initial broadly spaced drill holes were completed at the Stannex Prospect, approximately 1km northeast of the Gilmore"

MGRC011Mt Garnet · tinGrade: 1.99Grade Unit: %Intercept: 15 mView all details

Link to this fact

Identity

Hole ID: MGRC011
Project: Mt Garnet
Commodity: tin
Region: australia_qld
Reported Region: australia_qld
Ticker: KOB

Geometry

Grade: 1.99
Grade Unit: %
Intercept: 15 m
From: 117 m
To: 132 m
Hole Depth: 162 m
Intercept Depth: 111 m

Classification

Deposit Type: other
Program: exploration
Sample Type: drill
Group ID: MGRC011:117-132
Mining Method: underground

Location

Easting: 279795
Northing: 8059962
Elevation: 642 m
Azimuth: 44 °
Dip: -70 °
Loc. Confidence: high
Loc. Source: document

QA/QC

Laboratory: Intertek Minerals Townsville Laboratory and Intertek Genalysis Perth
QA/QC Disclosed: Yes
QP Signed: Yes
QA/QC Methods: standards, blanks, duplicates

Compositing

Cutoff Grade: 0.4
Cutoff Unit: % Sn
Dilution Disclosed: Yes
Max Dilution: 2 m

Review

Needs Review: No
Interp. Status: scored
Historical: No

Dates

Event date: 2026-10-13T00:00:00.000Z

Reasoning: This intercept of 15m at 1.99% Sn is an exceptional result, demonstrating high-grade tin mineralization over a significant width, well above the project's historical best grade-width product.

Positive factors

Exceptional grade for tin in an underground context
Strong continuous width of 15m
Significantly higher than the project's prior best grade of 5.2% Sn over 1m (GT 5.2)

Negative factors

True width not known

Tags used in scoring

QA/QC Disclosedpositive

Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).

Why it applies: qaqc_disclosed is true

Compositing Transparentpositive

Cut-off grade and internal dilution rules are clearly stated for reported intervals.

Why it applies: cutoff_grade and internal dilution are both stated

Nearology Playneutral

Value premise rests on proximity to a known deposit rather than own results.

Why it applies: proximity is offered as the value premise: "21 initial broadly spaced drill holes were completed at the Stannex Prospect, approximately 1km northeast of the Gilmore"

MGRC011Mt Garnet · copperGrade: 0.58Grade Unit: %Intercept: 15 mView all details

Link to this fact

Identity

Hole ID: MGRC011
Project: Mt Garnet
Commodity: copper
Region: australia_qld
Reported Region: australia_qld
Ticker: KOB

Geometry

Grade: 0.58
Grade Unit: %
Intercept: 15 m
From: 117 m
To: 132 m
Hole Depth: 162 m
Intercept Depth: 111 m

Classification

Deposit Type: other
Program: exploration
Sample Type: drill
Group ID: MGRC011:117-132
Mining Method: underground

Location

Easting: 279795
Northing: 8059962
Elevation: 642 m
Azimuth: 44 °
Dip: -70 °
Loc. Confidence: high
Loc. Source: document

QA/QC

Laboratory: Intertek Minerals Townsville Laboratory and Intertek Genalysis Perth
QA/QC Disclosed: Yes
QP Signed: Yes
QA/QC Methods: standards, blanks, duplicates

Compositing

Cutoff Grade: 0.4
Cutoff Unit: % Sn
Dilution Disclosed: Yes
Max Dilution: 2 m

Review

Needs Review: No
Interp. Status: scored
Historical: No

Dates

Event date: 2026-10-13T00:00:00.000Z

Reasoning: The copper grade of 0.58% over 15m is low for an underground target, but represents associated mineralization within a high-grade tin zone.

Positive factors

Associated mineralization in a new discovery

Negative factors

Low copper grade for an underground target
True width not known

Tags used in scoring

QA/QC Disclosedpositive

Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).

Why it applies: qaqc_disclosed is true

Compositing Transparentpositive

Cut-off grade and internal dilution rules are clearly stated for reported intervals.

Why it applies: cutoff_grade and internal dilution are both stated

Nearology Playneutral

Value premise rests on proximity to a known deposit rather than own results.

Why it applies: proximity is offered as the value premise: "21 initial broadly spaced drill holes were completed at the Stannex Prospect, approximately 1km northeast of the Gilmore"

MGRC011Mt Garnet · tungstenGrade: 0.02Grade Unit: %Intercept: 15 mView all details

Link to this fact

Identity

Hole ID: MGRC011
Project: Mt Garnet
Commodity: tungsten
Region: australia_qld
Reported Region: australia_qld
Ticker: KOB

Geometry

Grade: 0.02
Grade Unit: %
Intercept: 15 m
From: 117 m
To: 132 m
Hole Depth: 162 m
Intercept Depth: 111 m

Classification

Deposit Type: other
Program: exploration
Sample Type: drill
Group ID: MGRC011:117-132
Mining Method: underground

Location

Easting: 279795
Northing: 8059962
Elevation: 642 m
Azimuth: 44 °
Dip: -70 °
Loc. Confidence: high
Loc. Source: document

QA/QC

Laboratory: Intertek Minerals Townsville Laboratory and Intertek Genalysis Perth
QA/QC Disclosed: Yes
QP Signed: Yes
QA/QC Methods: standards, blanks, duplicates

Compositing

Cutoff Grade: 0.4
Cutoff Unit: % Sn
Dilution Disclosed: Yes
Max Dilution: 2 m

Review

Needs Review: No
Interp. Status: scored
Historical: No

Dates

Event date: 2026-10-13T00:00:00.000Z

Reasoning: The tungsten grade of 0.020% (200 ppm) over 15m is very low and unlikely to be economic, but is noted as associated mineralization.

Positive factors

Associated mineralization in a new discovery

Negative factors

Very low tungsten grade
True width not known

Tags used in scoring

QA/QC Disclosedpositive

Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).

Why it applies: qaqc_disclosed is true

Compositing Transparentpositive

Cut-off grade and internal dilution rules are clearly stated for reported intervals.

Why it applies: cutoff_grade and internal dilution are both stated

Nearology Playneutral

Value premise rests on proximity to a known deposit rather than own results.

Why it applies: proximity is offered as the value premise: "21 initial broadly spaced drill holes were completed at the Stannex Prospect, approximately 1km northeast of the Gilmore"

MGRC011Mt Garnet · silverGrade: 33Grade Unit: g/tIntercept: 15 mView all details

Link to this fact

Identity

Hole ID: MGRC011
Project: Mt Garnet
Commodity: silver
Region: australia_qld
Reported Region: australia_qld
Ticker: KOB

Geometry

Grade: 33
Grade Unit: g/t
Intercept: 15 m
From: 117 m
To: 132 m
Hole Depth: 162 m
Intercept Depth: 111 m

Classification

Deposit Type: other
Program: exploration
Sample Type: drill
Group ID: MGRC011:117-132
Mining Method: underground

Location

Easting: 279795
Northing: 8059962
Elevation: 642 m
Azimuth: 44 °
Dip: -70 °
Loc. Confidence: high
Loc. Source: document

QA/QC

Laboratory: Intertek Minerals Townsville Laboratory and Intertek Genalysis Perth
QA/QC Disclosed: Yes
QP Signed: Yes
QA/QC Methods: standards, blanks, duplicates

Compositing

Cutoff Grade: 0.4
Cutoff Unit: % Sn
Dilution Disclosed: Yes
Max Dilution: 2 m

Review

Needs Review: No
Interp. Status: scored
Historical: No

Dates

Event date: 2026-10-13T00:00:00.000Z

Reasoning: The silver grade of 33 g/t over 15m is low for an underground target, and the high detection limit for silver reduces confidence in the reported value.

Positive factors

Associated mineralization in a new discovery

Negative factors

Low silver grade for an underground target
True width not known
High detection limit for silver (10 g/t) reduces confidence in reported values

Tags used in scoring

QA/QC Disclosedpositive

Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).

Why it applies: qaqc_disclosed is true

Compositing Transparentpositive

Cut-off grade and internal dilution rules are clearly stated for reported intervals.

Why it applies: cutoff_grade and internal dilution are both stated

Nearology Playneutral

Value premise rests on proximity to a known deposit rather than own results.

Why it applies: proximity is offered as the value premise: "21 initial broadly spaced drill holes were completed at the Stannex Prospect, approximately 1km northeast of the Gilmore"

MGRC011Mt Garnet · tinGrade: 6.34Grade Unit: %Intercept: 2 mView all details

Link to this fact

Identity

Hole ID: MGRC011
Project: Mt Garnet
Commodity: tin
Region: australia_qld
Reported Region: australia_qld
Ticker: KOB

Geometry

Grade: 6.34
Grade Unit: %
Intercept: 2 m
From: 126 m
To: 128 m
Hole Depth: 162 m
Intercept Depth: 111 m

Classification

Deposit Type: other
Program: exploration
Sample Type: drill
Group ID: MGRC011:126-128
Mining Method: underground

Location

Easting: 279795
Northing: 8059962
Elevation: 642 m
Azimuth: 44 °
Dip: -70 °
Loc. Confidence: high
Loc. Source: document

QA/QC

Laboratory: Intertek Minerals Townsville Laboratory and Intertek Genalysis Perth
QA/QC Disclosed: Yes
QP Signed: Yes
QA/QC Methods: standards, blanks, duplicates

Compositing

Cutoff Grade: 2
Cutoff Unit: % Sn
Dilution Disclosed: Yes
Max Dilution: 2 m

Review

Needs Review: No
Interp. Status: scored
Historical: No

Dates

Event date: 2026-10-13T00:00:00.000Z

Reasoning: This intercept of 2m at 6.34% Sn is a bonanza-grade result, demonstrating very high-grade tin mineralization comparable to historical production, and significantly exceeding prior best results for the project.

Positive factors

Bonanza grade for tin in an underground context
Significantly higher than the project's prior best grade of 5.2% Sn
Close to historical production grades of 7.6% Sn

Negative factors

Narrow width of 2m
True width not known

Tags used in scoring

QA/QC Disclosedpositive

Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).

Why it applies: qaqc_disclosed is true

Compositing Transparentpositive

Cut-off grade and internal dilution rules are clearly stated for reported intervals.

Why it applies: cutoff_grade and internal dilution are both stated

Nearology Playneutral

Value premise rests on proximity to a known deposit rather than own results.

Why it applies: proximity is offered as the value premise: "21 initial broadly spaced drill holes were completed at the Stannex Prospect, approximately 1km northeast of the Gilmore"

MGRC011Mt Garnet · copperGrade: 0.44Grade Unit: %Intercept: 2 mView all details

Link to this fact

Identity

Hole ID: MGRC011
Project: Mt Garnet
Commodity: copper
Region: australia_qld
Reported Region: australia_qld
Ticker: KOB

Geometry

Grade: 0.44
Grade Unit: %
Intercept: 2 m
From: 126 m
To: 128 m
Hole Depth: 162 m
Intercept Depth: 111 m

Classification

Deposit Type: other
Program: exploration
Sample Type: drill
Group ID: MGRC011:126-128
Mining Method: underground

Location

Easting: 279795
Northing: 8059962
Elevation: 642 m
Azimuth: 44 °
Dip: -70 °
Loc. Confidence: high
Loc. Source: document

QA/QC

Laboratory: Intertek Minerals Townsville Laboratory and Intertek Genalysis Perth
QA/QC Disclosed: Yes
QP Signed: Yes
QA/QC Methods: standards, blanks, duplicates

Compositing

Cutoff Grade: 2
Cutoff Unit: % Sn
Dilution Disclosed: Yes
Max Dilution: 2 m

Review

Needs Review: No
Interp. Status: scored
Historical: No

Dates

Event date: 2026-10-13T00:00:00.000Z

Reasoning: The copper grade of 0.44% over 2m is low for an underground target, but represents associated mineralization within a bonanza-grade tin zone.

Positive factors

Associated mineralization in a new discovery

Negative factors

Low copper grade for an underground target
True width not known

Tags used in scoring

QA/QC Disclosedpositive

Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).

Why it applies: qaqc_disclosed is true

Compositing Transparentpositive

Cut-off grade and internal dilution rules are clearly stated for reported intervals.

Why it applies: cutoff_grade and internal dilution are both stated

Nearology Playneutral

Value premise rests on proximity to a known deposit rather than own results.

Why it applies: proximity is offered as the value premise: "21 initial broadly spaced drill holes were completed at the Stannex Prospect, approximately 1km northeast of the Gilmore"

MGRC011Mt Garnet · tungstenGrade: 0.017Grade Unit: %Intercept: 2 mView all details

Link to this fact

Identity

Hole ID: MGRC011
Project: Mt Garnet
Commodity: tungsten
Region: australia_qld
Reported Region: australia_qld
Ticker: KOB

Geometry

Grade: 0.017
Grade Unit: %
Intercept: 2 m
From: 126 m
To: 128 m
Hole Depth: 162 m
Intercept Depth: 111 m

Classification

Deposit Type: other
Program: exploration
Sample Type: drill
Group ID: MGRC011:126-128
Mining Method: underground

Location

Easting: 279795
Northing: 8059962
Elevation: 642 m
Azimuth: 44 °
Dip: -70 °
Loc. Confidence: high
Loc. Source: document

QA/QC

Laboratory: Intertek Minerals Townsville Laboratory and Intertek Genalysis Perth
QA/QC Disclosed: Yes
QP Signed: Yes
QA/QC Methods: standards, blanks, duplicates

Compositing

Cutoff Grade: 2
Cutoff Unit: % Sn
Dilution Disclosed: Yes
Max Dilution: 2 m

Review

Needs Review: No
Interp. Status: scored
Historical: No

Dates

Event date: 2026-10-13T00:00:00.000Z

Reasoning: The tungsten grade of 0.017% (170 ppm) over 2m is very low and unlikely to be economic, but is noted as associated mineralization.

Positive factors

Associated mineralization in a new discovery

Negative factors

Very low tungsten grade
True width not known

Tags used in scoring

QA/QC Disclosedpositive

Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).

Why it applies: qaqc_disclosed is true

Compositing Transparentpositive

Cut-off grade and internal dilution rules are clearly stated for reported intervals.

Why it applies: cutoff_grade and internal dilution are both stated

Nearology Playneutral

Value premise rests on proximity to a known deposit rather than own results.

Why it applies: proximity is offered as the value premise: "21 initial broadly spaced drill holes were completed at the Stannex Prospect, approximately 1km northeast of the Gilmore"

MGRC011Mt Garnet · silverGrade: 26Grade Unit: g/tIntercept: 2 mView all details

Link to this fact

Identity

Hole ID: MGRC011
Project: Mt Garnet
Commodity: silver
Region: australia_qld
Reported Region: australia_qld
Ticker: KOB

Geometry

Grade: 26
Grade Unit: g/t
Intercept: 2 m
From: 126 m
To: 128 m
Hole Depth: 162 m
Intercept Depth: 111 m

Classification

Deposit Type: other
Program: exploration
Sample Type: drill
Group ID: MGRC011:126-128
Mining Method: underground

Location

Easting: 279795
Northing: 8059962
Elevation: 642 m
Azimuth: 44 °
Dip: -70 °
Loc. Confidence: high
Loc. Source: document

QA/QC

Laboratory: Intertek Minerals Townsville Laboratory and Intertek Genalysis Perth
QA/QC Disclosed: Yes
QP Signed: Yes
QA/QC Methods: standards, blanks, duplicates

Compositing

Cutoff Grade: 2
Cutoff Unit: % Sn
Dilution Disclosed: Yes
Max Dilution: 2 m

Review

Needs Review: No
Interp. Status: scored
Historical: No

Dates

Event date: 2026-10-13T00:00:00.000Z

Reasoning: The silver grade of 26 g/t over 2m is low for an underground target, and the high detection limit for silver reduces confidence in the reported value.

Positive factors

Associated mineralization in a new discovery

Negative factors

Low silver grade for an underground target
True width not known
High detection limit for silver (10 g/t) reduces confidence in reported values

Tags used in scoring

QA/QC Disclosedpositive

Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).

Why it applies: qaqc_disclosed is true

Compositing Transparentpositive

Cut-off grade and internal dilution rules are clearly stated for reported intervals.

Why it applies: cutoff_grade and internal dilution are both stated

Nearology Playneutral

Value premise rests on proximity to a known deposit rather than own results.

Why it applies: proximity is offered as the value premise: "21 initial broadly spaced drill holes were completed at the Stannex Prospect, approximately 1km northeast of the Gilmore"

MGRC013Mt Garnet · tinGrade: 0.58Grade Unit: %Intercept: 5 mView all details

Link to this fact

Identity

Hole ID: MGRC013
Project: Mt Garnet
Commodity: tin
Region: australia_qld
Reported Region: australia_qld
Ticker: KOB

Geometry

Grade: 0.58
Grade Unit: %
Intercept: 5 m
From: 9 m
To: 14 m
Hole Depth: 50 m
Intercept Depth: 9 m

Classification

Deposit Type: other
Program: exploration
Sample Type: drill
Group ID: MGRC013:9-14
Mining Method: underground

Location

Easting: 280018
Northing: 8059968
Elevation: 623 m
Azimuth: 211 °
Dip: -54 °
Loc. Confidence: high
Loc. Source: document

QA/QC

Laboratory: Intertek Minerals Townsville Laboratory and Intertek Genalysis Perth
QA/QC Disclosed: Yes
QP Signed: Yes
QA/QC Methods: standards, blanks, duplicates

Compositing

Cutoff Grade: 0.1
Cutoff Unit: % Sn
Dilution Disclosed: Yes
Max Dilution: 2 m

Review

Needs Review: No
Interp. Status: scored
Historical: No

Dates

Event date: 2026-10-13T00:00:00.000Z

Reasoning: This intercept of 5m at 0.58% Sn is a weak grade for an underground target but is significant for extending mineralization along strike from the main discovery.

Positive factors

Moderate width of 5m
Confirms mineralization 230m east of MGRC011, indicating strike potential

Negative factors

Weak grade for tin in an underground context
True width not known

Tags used in scoring

QA/QC Disclosedpositive

Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).

Why it applies: qaqc_disclosed is true

Compositing Transparentpositive

Cut-off grade and internal dilution rules are clearly stated for reported intervals.

Why it applies: cutoff_grade and internal dilution are both stated

Nearology Playneutral

Value premise rests on proximity to a known deposit rather than own results.

Why it applies: proximity is offered as the value premise: "21 initial broadly spaced drill holes were completed at the Stannex Prospect, approximately 1km northeast of the Gilmore"

MGRC013Mt Garnet · tinGrade: 1.17Grade Unit: %Intercept: 2 mView all details

Link to this fact

Identity

Hole ID: MGRC013
Project: Mt Garnet
Commodity: tin
Region: australia_qld
Reported Region: australia_qld
Ticker: KOB

Geometry

Grade: 1.17
Grade Unit: %
Intercept: 2 m
From: 9 m
To: 11 m
Hole Depth: 50 m
Intercept Depth: 9 m

Classification

Deposit Type: other
Program: exploration
Sample Type: drill
Group ID: MGRC013:9-11
Mining Method: underground

Location

Easting: 280018
Northing: 8059968
Elevation: 623 m
Azimuth: 211 °
Dip: -54 °
Loc. Confidence: high
Loc. Source: document

QA/QC

Laboratory: Intertek Minerals Townsville Laboratory and Intertek Genalysis Perth
QA/QC Disclosed: Yes
QP Signed: Yes
QA/QC Methods: standards, blanks, duplicates

Compositing

Cutoff Grade: 0.4
Cutoff Unit: % Sn
Dilution Disclosed: Yes
Max Dilution: 2 m

Review

Needs Review: No
Interp. Status: scored
Historical: No

Dates

Event date: 2026-10-13T00:00:00.000Z

Reasoning: This included intercept of 2m at 1.17% Sn shows moderate-grade tin mineralization, supporting the potential for strike extensions.

Positive factors

Moderate grade for tin in an underground context
Confirms mineralization 230m east of MGRC011, indicating strike potential

Negative factors

Narrow width of 2m
True width not known

Tags used in scoring

QA/QC Disclosedpositive

Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).

Why it applies: qaqc_disclosed is true

Compositing Transparentpositive

Cut-off grade and internal dilution rules are clearly stated for reported intervals.

Why it applies: cutoff_grade and internal dilution are both stated

Nearology Playneutral

Value premise rests on proximity to a known deposit rather than own results.

Why it applies: proximity is offered as the value premise: "21 initial broadly spaced drill holes were completed at the Stannex Prospect, approximately 1km northeast of the Gilmore"

MGRC020Mt Garnet · tinGrade: 0.67Grade Unit: %Intercept: 4 mView all details

Link to this fact

Identity

Hole ID: MGRC020
Project: Mt Garnet
Commodity: tin
Region: australia_qld
Reported Region: australia_qld
Ticker: KOB

Geometry

Grade: 0.67
Grade Unit: %
Intercept: 4 m
From: 5 m
To: 9 m
Hole Depth: 90 m
Intercept Depth: 5 m

Classification

Deposit Type: other
Program: exploration
Sample Type: drill
Group ID: MGRC020:5-9
Mining Method: underground

Location

Easting: 280692
Northing: 8061120
Elevation: 636 m
Azimuth: 43 °
Dip: -60 °
Loc. Confidence: high
Loc. Source: document

QA/QC

Laboratory: Intertek Minerals Townsville Laboratory and Intertek Genalysis Perth
QA/QC Disclosed: Yes
QP Signed: Yes
QA/QC Methods: standards, blanks, duplicates

Compositing

Cutoff Grade: 0.1
Cutoff Unit: % Sn
Dilution Disclosed: Yes
Max Dilution: 2 m

Review

Needs Review: No
Interp. Status: scored
Historical: No

Dates

Event date: 2026-10-13T00:00:00.000Z

Reasoning: This intercept of 4m at 0.67% Sn represents a weak but encouraging result from the maiden drilling at the Stannex Prospect, indicating new mineralization.

Positive factors

Weak grade for tin in an underground context
Part of a maiden drilling program at Stannex Prospect, indicating new discovery

Negative factors

True width not known

Tags used in scoring

QA/QC Disclosedpositive

Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).

Why it applies: qaqc_disclosed is true

Compositing Transparentpositive

Cut-off grade and internal dilution rules are clearly stated for reported intervals.

Why it applies: cutoff_grade and internal dilution are both stated

Nearology Playneutral

Value premise rests on proximity to a known deposit rather than own results.

Why it applies: proximity is offered as the value premise: "21 initial broadly spaced drill holes were completed at the Stannex Prospect, approximately 1km northeast of the Gilmore"

MGRC020Mt Garnet · tinGrade: 1.86Grade Unit: %Intercept: 1 mView all details

Link to this fact

Identity

Hole ID: MGRC020
Project: Mt Garnet
Commodity: tin
Region: australia_qld
Reported Region: australia_qld
Ticker: KOB

Geometry

Grade: 1.86
Grade Unit: %
Intercept: 1 m
From: 5 m
To: 6 m
Hole Depth: 90 m
Intercept Depth: 5 m

Classification

Deposit Type: other
Program: exploration
Sample Type: drill
Group ID: MGRC020:5-6
Mining Method: underground

Location

Easting: 280692
Northing: 8061120
Elevation: 636 m
Azimuth: 43 °
Dip: -60 °
Loc. Confidence: high
Loc. Source: document

QA/QC

Laboratory: Intertek Minerals Townsville Laboratory and Intertek Genalysis Perth
QA/QC Disclosed: Yes
QP Signed: Yes
QA/QC Methods: standards, blanks, duplicates

Compositing

Cutoff Grade: 0.4
Cutoff Unit: % Sn
Dilution Disclosed: Yes
Max Dilution: 2 m

Review

Needs Review: No
Interp. Status: scored
Historical: No

Dates

Event date: 2026-10-13T00:00:00.000Z

Reasoning: This included intercept of 1m at 1.86% Sn is an exceptional grade for tin, highlighting high-grade potential within the Stannex Prospect.

Positive factors

Exceptional grade for tin in an underground context
Part of a maiden drilling program at Stannex Prospect, indicating new discovery

Negative factors

Narrow width of 1m
True width not known

Tags used in scoring

QA/QC Disclosedpositive

Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).

Why it applies: qaqc_disclosed is true

Compositing Transparentpositive

Cut-off grade and internal dilution rules are clearly stated for reported intervals.

Why it applies: cutoff_grade and internal dilution are both stated

Nearology Playneutral

Value premise rests on proximity to a known deposit rather than own results.

Why it applies: proximity is offered as the value premise: "21 initial broadly spaced drill holes were completed at the Stannex Prospect, approximately 1km northeast of the Gilmore"

MGRC021Mt Garnet · tinGrade: 0.25Grade Unit: %Intercept: 10 mView all details

Link to this fact

Identity

Hole ID: MGRC021
Project: Mt Garnet
Commodity: tin
Region: australia_qld
Reported Region: australia_qld
Ticker: KOB

Geometry

Grade: 0.25
Grade Unit: %
Intercept: 10 m
From: 69 m
To: 79 m
Hole Depth: 100 m
Intercept Depth: 69 m

Classification

Deposit Type: other
Program: exploration
Sample Type: drill
Group ID: MGRC021:69-79
Mining Method: underground

Location

Easting: 280835
Northing: 8061055
Elevation: 629 m
Azimuth: 225 °
Dip: -49 °
Loc. Confidence: high
Loc. Source: document

QA/QC

Laboratory: Intertek Minerals Townsville Laboratory and Intertek Genalysis Perth
QA/QC Disclosed: Yes
QP Signed: Yes
QA/QC Methods: standards, blanks, duplicates

Compositing

Cutoff Grade: 0.1
Cutoff Unit: % Sn
Dilution Disclosed: Yes
Max Dilution: 2 m

Review

Needs Review: No
Interp. Status: scored
Historical: No

Dates

Event date: 2026-10-13T00:00:00.000Z

Reasoning: This intercept of 10m at 0.25% Sn is below the weak grade threshold for tin in an underground context, but contributes to the overall mineralization footprint at Stannex.

Positive factors

Moderate width of 10m
Part of a maiden drilling program at Stannex Prospect, indicating new discovery

Negative factors

Grade is below the weak threshold for tin in an underground context
True width not known

Tags used in scoring

QA/QC Disclosedpositive

Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).

Why it applies: qaqc_disclosed is true

Compositing Transparentpositive

Cut-off grade and internal dilution rules are clearly stated for reported intervals.

Why it applies: cutoff_grade and internal dilution are both stated

Nearology Playneutral

Value premise rests on proximity to a known deposit rather than own results.

Why it applies: proximity is offered as the value premise: "21 initial broadly spaced drill holes were completed at the Stannex Prospect, approximately 1km northeast of the Gilmore"

MGRC002Mt Garnet · tinGrade: 0.11Grade Unit: %Intercept: 5 mView all details

Link to this fact

Identity

Hole ID: MGRC002
Project: Mt Garnet
Commodity: tin
Region: australia_qld
Reported Region: australia_qld
Ticker: KOB

Geometry

Grade: 0.11
Grade Unit: %
Intercept: 5 m
From: 114 m
To: 119 m
Hole Depth: 120 m
Intercept Depth: 114 m

Classification

Deposit Type: other
Program: exploration
Sample Type: drill
Group ID: MGRC002:114-119
Mining Method: underground

Location

Easting: 281185
Northing: 8060512
Elevation: 619 m
Azimuth: 43 °
Dip: -60 °
Loc. Confidence: high
Loc. Source: document

QA/QC

Laboratory: Intertek Minerals Townsville Laboratory and Intertek Genalysis Perth
QA/QC Disclosed: Yes
QP Signed: Yes
QA/QC Methods: standards, blanks, duplicates

Compositing

Cutoff Grade: 0.1
Cutoff Unit: % Sn
Dilution Disclosed: Yes
Max Dilution: 2 m

Review

Needs Review: No
Interp. Status: scored
Historical: No

Dates

Event date: 2026-10-13T00:00:00.000Z

Reasoning: This intercept of 5m at 0.11% Sn is below the weak grade threshold for tin in an underground context, but contributes to the overall mineralization footprint at Stannex.

Positive factors

Part of a maiden drilling program at Stannex Prospect, indicating new discovery

Negative factors

Grade is below the weak threshold for tin in an underground context
True width not known

Tags used in scoring

QA/QC Disclosedpositive

Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).

Why it applies: qaqc_disclosed is true

Compositing Transparentpositive

Cut-off grade and internal dilution rules are clearly stated for reported intervals.

Why it applies: cutoff_grade and internal dilution are both stated

Nearology Playneutral

Value premise rests on proximity to a known deposit rather than own results.

Why it applies: proximity is offered as the value premise: "21 initial broadly spaced drill holes were completed at the Stannex Prospect, approximately 1km northeast of the Gilmore"

MGRC002Mt Garnet · tungstenGrade: 21Grade Unit: ppmIntercept: 5 mView all details

Link to this fact

Identity

Hole ID: MGRC002
Project: Mt Garnet
Commodity: tungsten
Region: australia_qld
Reported Region: australia_qld
Ticker: KOB

Geometry

Grade: 21
Grade Unit: ppm
Intercept: 5 m
From: 114 m
To: 119 m
Hole Depth: 120 m
Intercept Depth: 114 m

Classification

Deposit Type: other
Program: exploration
Sample Type: drill
Group ID: MGRC002:114-119
Mining Method: underground

Location

Easting: 281185
Northing: 8060512
Elevation: 619 m
Azimuth: 43 °
Dip: -60 °
Loc. Confidence: high
Loc. Source: document

QA/QC

Laboratory: Intertek Minerals Townsville Laboratory and Intertek Genalysis Perth
QA/QC Disclosed: Yes
QP Signed: Yes
QA/QC Methods: standards, blanks, duplicates

Compositing

Cutoff Grade: 0.1
Cutoff Unit: % Sn
Dilution Disclosed: Yes
Max Dilution: 2 m

Review

Needs Review: No
Interp. Status: scored
Historical: No

Dates

Event date: 2026-10-13T00:00:00.000Z

Reasoning: The tungsten grade of 21 ppm over 5m is very low and unlikely to be economic, but is noted as associated mineralization.

Positive factors

Associated mineralization in a new discovery

Negative factors

Very low tungsten grade
True width not known

Tags used in scoring

QA/QC Disclosedpositive

Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).

Why it applies: qaqc_disclosed is true

Compositing Transparentpositive

Cut-off grade and internal dilution rules are clearly stated for reported intervals.

Why it applies: cutoff_grade and internal dilution are both stated

Nearology Playneutral

Value premise rests on proximity to a known deposit rather than own results.

Why it applies: proximity is offered as the value premise: "21 initial broadly spaced drill holes were completed at the Stannex Prospect, approximately 1km northeast of the Gilmore"

MGRC002Mt Garnet · copperGrade: 0.01Grade Unit: %Intercept: 5 mView all details

Link to this fact

Identity

Hole ID: MGRC002
Project: Mt Garnet
Commodity: copper
Region: australia_qld
Reported Region: australia_qld
Ticker: KOB

Geometry

Grade: 0.01
Grade Unit: %
Intercept: 5 m
From: 114 m
To: 119 m
Hole Depth: 120 m
Intercept Depth: 114 m

Classification

Deposit Type: other
Program: exploration
Sample Type: drill
Group ID: MGRC002:114-119
Mining Method: underground

Location

Easting: 281185
Northing: 8060512
Elevation: 619 m
Azimuth: 43 °
Dip: -60 °
Loc. Confidence: high
Loc. Source: document

QA/QC

Laboratory: Intertek Minerals Townsville Laboratory and Intertek Genalysis Perth
QA/QC Disclosed: Yes
QP Signed: Yes
QA/QC Methods: standards, blanks, duplicates

Compositing

Cutoff Grade: 0.1
Cutoff Unit: % Sn
Dilution Disclosed: Yes
Max Dilution: 2 m

Review

Needs Review: No
Interp. Status: scored
Historical: No

Dates

Event date: 2026-10-13T00:00:00.000Z

Reasoning: The copper grade of 0.01% over 5m is a trace amount and not economically significant, but is noted as associated mineralization.

Positive factors

Associated mineralization in a new discovery

Negative factors

Trace copper grade
True width not known

Tags used in scoring

QA/QC Disclosedpositive

Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).

Why it applies: qaqc_disclosed is true

Compositing Transparentpositive

Cut-off grade and internal dilution rules are clearly stated for reported intervals.

Why it applies: cutoff_grade and internal dilution are both stated

Nearology Playneutral

Value premise rests on proximity to a known deposit rather than own results.

Why it applies: proximity is offered as the value premise: "21 initial broadly spaced drill holes were completed at the Stannex Prospect, approximately 1km northeast of the Gilmore"

MGRC002Mt Garnet · zincGrade: 0.05Grade Unit: %Intercept: 5 mView all details

Link to this fact

Identity

Hole ID: MGRC002
Project: Mt Garnet
Commodity: zinc
Region: australia_qld
Reported Region: australia_qld
Ticker: KOB

Geometry

Grade: 0.05
Grade Unit: %
Intercept: 5 m
From: 114 m
To: 119 m
Hole Depth: 120 m
Intercept Depth: 114 m

Classification

Deposit Type: other
Program: exploration
Sample Type: drill
Group ID: MGRC002:114-119
Mining Method: underground

Location

Easting: 281185
Northing: 8060512
Elevation: 619 m
Azimuth: 43 °
Dip: -60 °
Loc. Confidence: high
Loc. Source: document

QA/QC

Laboratory: Intertek Minerals Townsville Laboratory and Intertek Genalysis Perth
QA/QC Disclosed: Yes
QP Signed: Yes
QA/QC Methods: standards, blanks, duplicates

Compositing

Cutoff Grade: 0.1
Cutoff Unit: % Sn
Dilution Disclosed: Yes
Max Dilution: 2 m

Review

Needs Review: No
Interp. Status: scored
Historical: No

Dates

Event date: 2026-10-13T00:00:00.000Z

Reasoning: The zinc grade of 0.05% over 5m is a trace amount and not economically significant, but is noted as associated mineralization.

Positive factors

Associated mineralization in a new discovery

Negative factors

Trace zinc grade
True width not known

Tags used in scoring

QA/QC Disclosedpositive

Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).

Why it applies: qaqc_disclosed is true

Compositing Transparentpositive

Cut-off grade and internal dilution rules are clearly stated for reported intervals.

Why it applies: cutoff_grade and internal dilution are both stated

Nearology Playneutral

Value premise rests on proximity to a known deposit rather than own results.

Why it applies: proximity is offered as the value premise: "21 initial broadly spaced drill holes were completed at the Stannex Prospect, approximately 1km northeast of the Gilmore"

MGRC002Mt Garnet · silverGrade: 5Grade Unit: g/tIntercept: 5 mView all details

Link to this fact

Identity

Hole ID: MGRC002
Project: Mt Garnet
Commodity: silver
Region: australia_qld
Reported Region: australia_qld
Ticker: KOB

Geometry

Grade: 5
Grade Unit: g/t
Intercept: 5 m
From: 114 m
To: 119 m
Hole Depth: 120 m
Intercept Depth: 114 m

Classification

Deposit Type: other
Program: exploration
Sample Type: drill
Group ID: MGRC002:114-119
Mining Method: underground

Location

Easting: 281185
Northing: 8060512
Elevation: 619 m
Azimuth: 43 °
Dip: -60 °
Loc. Confidence: high
Loc. Source: document

QA/QC

Laboratory: Intertek Minerals Townsville Laboratory and Intertek Genalysis Perth
QA/QC Disclosed: Yes
QP Signed: Yes
QA/QC Methods: standards, blanks, duplicates

Compositing

Cutoff Grade: 0.1
Cutoff Unit: % Sn
Dilution Disclosed: Yes
Max Dilution: 2 m

Review

Needs Review: No
Interp. Status: scored
Historical: No

Dates

Event date: 2026-10-13T00:00:00.000Z

Reasoning: The silver grade of 5 g/t over 5m is a trace amount and not economically significant, and the high detection limit for silver reduces confidence in the reported value.

Positive factors

Associated mineralization in a new discovery

Negative factors

Trace silver grade
True width not known
High detection limit for silver (10 g/t) reduces confidence in reported values

Tags used in scoring

QA/QC Disclosedpositive

Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).

Why it applies: qaqc_disclosed is true

Compositing Transparentpositive

Cut-off grade and internal dilution rules are clearly stated for reported intervals.

Why it applies: cutoff_grade and internal dilution are both stated

Nearology Playneutral

Value premise rests on proximity to a known deposit rather than own results.

Why it applies: proximity is offered as the value premise: "21 initial broadly spaced drill holes were completed at the Stannex Prospect, approximately 1km northeast of the Gilmore"

MGRC002Mt Garnet · indiumGrade: 2.3Grade Unit: g/tIntercept: 5 mView all details

Link to this fact

Identity

Hole ID: MGRC002
Project: Mt Garnet
Commodity: indium
Region: australia_qld
Reported Region: australia_qld
Ticker: KOB

Geometry

Grade: 2.3
Grade Unit: g/t
Intercept: 5 m
From: 114 m
To: 119 m
Hole Depth: 120 m
Intercept Depth: 114 m

Classification

Deposit Type: other
Program: exploration
Sample Type: drill
Group ID: MGRC002:114-119
Mining Method: underground

Location

Easting: 281185
Northing: 8060512
Elevation: 619 m
Azimuth: 43 °
Dip: -60 °
Loc. Confidence: high
Loc. Source: document

QA/QC

Laboratory: Intertek Minerals Townsville Laboratory and Intertek Genalysis Perth
QA/QC Disclosed: Yes
QP Signed: Yes
QA/QC Methods: standards, blanks, duplicates

Compositing

Cutoff Grade: 0.1
Cutoff Unit: % Sn
Dilution Disclosed: Yes
Max Dilution: 2 m

Review

Needs Review: No
Interp. Status: scored
Historical: No

Dates

Event date: 2026-10-13T00:00:00.000Z

Reasoning: The indium grade of 2.3 g/t over 5m is a trace amount and not economically significant, but is noted as associated mineralization.

Positive factors

Associated mineralization in a new discovery

Negative factors

Trace indium grade
True width not known

Tags used in scoring

QA/QC Disclosedpositive

Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).

Why it applies: qaqc_disclosed is true

Compositing Transparentpositive

Cut-off grade and internal dilution rules are clearly stated for reported intervals.

Why it applies: cutoff_grade and internal dilution are both stated

Nearology Playneutral

Value premise rests on proximity to a known deposit rather than own results.

Why it applies: proximity is offered as the value premise: "21 initial broadly spaced drill holes were completed at the Stannex Prospect, approximately 1km northeast of the Gilmore"

MGRC003Mt Garnet · tinGrade: 0.33Grade Unit: %Intercept: 2 mView all details

Link to this fact

Identity

Hole ID: MGRC003
Project: Mt Garnet
Commodity: tin
Region: australia_qld
Reported Region: australia_qld
Ticker: KOB

Geometry

Grade: 0.33
Grade Unit: %
Intercept: 2 m
From: 42 m
To: 44 m
Hole Depth: 120 m
Intercept Depth: 42 m

Classification

Deposit Type: other
Program: exploration
Sample Type: drill
Group ID: MGRC003:42-44
Mining Method: underground

Location

Easting: 281161
Northing: 8060584
Elevation: 618 m
Azimuth: 46 °
Dip: -60 °
Loc. Confidence: high
Loc. Source: document

QA/QC

Laboratory: Intertek Minerals Townsville Laboratory and Intertek Genalysis Perth
QA/QC Disclosed: Yes
QP Signed: Yes
QA/QC Methods: standards, blanks, duplicates

Compositing

Cutoff Grade: 0.1
Cutoff Unit: % Sn
Dilution Disclosed: Yes
Max Dilution: 2 m

Review

Needs Review: No
Interp. Status: scored
Historical: No

Dates

Event date: 2026-10-13T00:00:00.000Z

Reasoning: This intercept of 2m at 0.33% Sn is below the weak grade threshold for tin in an underground context, but contributes to the overall mineralization footprint at Stannex.

Positive factors

Part of a maiden drilling program at Stannex Prospect, indicating new discovery

Negative factors

Grade is below the weak threshold for tin in an underground context
Narrow width of 2m
True width not known

Tags used in scoring

QA/QC Disclosedpositive

Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).

Why it applies: qaqc_disclosed is true

Compositing Transparentpositive

Cut-off grade and internal dilution rules are clearly stated for reported intervals.

Why it applies: cutoff_grade and internal dilution are both stated

Nearology Playneutral

Value premise rests on proximity to a known deposit rather than own results.

Why it applies: proximity is offered as the value premise: "21 initial broadly spaced drill holes were completed at the Stannex Prospect, approximately 1km northeast of the Gilmore"

MGRC003Mt Garnet · tungstenGrade: 18Grade Unit: ppmIntercept: 2 mView all details

Link to this fact

Identity

Hole ID: MGRC003
Project: Mt Garnet
Commodity: tungsten
Region: australia_qld
Reported Region: australia_qld
Ticker: KOB

Geometry

Grade: 18
Grade Unit: ppm
Intercept: 2 m
From: 42 m
To: 44 m
Hole Depth: 120 m
Intercept Depth: 42 m

Classification

Deposit Type: other
Program: exploration
Sample Type: drill
Group ID: MGRC003:42-44
Mining Method: underground

Location

Easting: 281161
Northing: 8060584
Elevation: 618 m
Azimuth: 46 °
Dip: -60 °
Loc. Confidence: high
Loc. Source: document

QA/QC

Laboratory: Intertek Minerals Townsville Laboratory and Intertek Genalysis Perth
QA/QC Disclosed: Yes
QP Signed: Yes
QA/QC Methods: standards, blanks, duplicates

Compositing

Cutoff Grade: 0.1
Cutoff Unit: % Sn
Dilution Disclosed: Yes
Max Dilution: 2 m

Review

Needs Review: No
Interp. Status: scored
Historical: No

Dates

Event date: 2026-10-13T00:00:00.000Z

Reasoning: The tungsten grade of 18 ppm over 2m is very low and unlikely to be economic, but is noted as associated mineralization.

Positive factors

Associated mineralization in a new discovery

Negative factors

Very low tungsten grade
True width not known

Tags used in scoring

QA/QC Disclosedpositive

Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).

Why it applies: qaqc_disclosed is true

Compositing Transparentpositive

Cut-off grade and internal dilution rules are clearly stated for reported intervals.

Why it applies: cutoff_grade and internal dilution are both stated

Nearology Playneutral

Value premise rests on proximity to a known deposit rather than own results.

Why it applies: proximity is offered as the value premise: "21 initial broadly spaced drill holes were completed at the Stannex Prospect, approximately 1km northeast of the Gilmore"

MGRC003Mt Garnet · copperGrade: 0.05Grade Unit: %Intercept: 2 mView all details

Link to this fact

Identity

Hole ID: MGRC003
Project: Mt Garnet
Commodity: copper
Region: australia_qld
Reported Region: australia_qld
Ticker: KOB

Geometry

Grade: 0.05
Grade Unit: %
Intercept: 2 m
From: 42 m
To: 44 m
Hole Depth: 120 m
Intercept Depth: 42 m

Classification

Deposit Type: other
Program: exploration
Sample Type: drill
Group ID: MGRC003:42-44
Mining Method: underground

Location

Easting: 281161
Northing: 8060584
Elevation: 618 m
Azimuth: 46 °
Dip: -60 °
Loc. Confidence: high
Loc. Source: document

QA/QC

Laboratory: Intertek Minerals Townsville Laboratory and Intertek Genalysis Perth
QA/QC Disclosed: Yes
QP Signed: Yes
QA/QC Methods: standards, blanks, duplicates

Compositing

Cutoff Grade: 0.1
Cutoff Unit: % Sn
Dilution Disclosed: Yes
Max Dilution: 2 m

Review

Needs Review: No
Interp. Status: scored
Historical: No

Dates

Event date: 2026-10-13T00:00:00.000Z

Reasoning: The copper grade of 0.05% over 2m is a trace amount and not economically significant, but is noted as associated mineralization.

Positive factors

Associated mineralization in a new discovery

Negative factors

Trace copper grade
True width not known

Tags used in scoring

QA/QC Disclosedpositive

Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).

Why it applies: qaqc_disclosed is true

Compositing Transparentpositive

Cut-off grade and internal dilution rules are clearly stated for reported intervals.

Why it applies: cutoff_grade and internal dilution are both stated

Nearology Playneutral

Value premise rests on proximity to a known deposit rather than own results.

Why it applies: proximity is offered as the value premise: "21 initial broadly spaced drill holes were completed at the Stannex Prospect, approximately 1km northeast of the Gilmore"

MGRC003Mt Garnet · zincGrade: 0.02Grade Unit: %Intercept: 2 mView all details

Link to this fact

Identity

Hole ID: MGRC003
Project: Mt Garnet
Commodity: zinc
Region: australia_qld
Reported Region: australia_qld
Ticker: KOB

Geometry

Grade: 0.02
Grade Unit: %
Intercept: 2 m
From: 42 m
To: 44 m
Hole Depth: 120 m
Intercept Depth: 42 m

Classification

Deposit Type: other
Program: exploration
Sample Type: drill
Group ID: MGRC003:42-44
Mining Method: underground

Location

Easting: 281161
Northing: 8060584
Elevation: 618 m
Azimuth: 46 °
Dip: -60 °
Loc. Confidence: high
Loc. Source: document

QA/QC

Laboratory: Intertek Minerals Townsville Laboratory and Intertek Genalysis Perth
QA/QC Disclosed: Yes
QP Signed: Yes
QA/QC Methods: standards, blanks, duplicates

Compositing

Cutoff Grade: 0.1
Cutoff Unit: % Sn
Dilution Disclosed: Yes
Max Dilution: 2 m

Review

Needs Review: No
Interp. Status: scored
Historical: No

Dates

Event date: 2026-10-13T00:00:00.000Z

Reasoning: The zinc grade of 0.02% over 2m is a trace amount and not economically significant, but is noted as associated mineralization.

Positive factors

Associated mineralization in a new discovery

Negative factors

Trace zinc grade
True width not known

Tags used in scoring

QA/QC Disclosedpositive

Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).

Why it applies: qaqc_disclosed is true

Compositing Transparentpositive

Cut-off grade and internal dilution rules are clearly stated for reported intervals.

Why it applies: cutoff_grade and internal dilution are both stated

Nearology Playneutral

Value premise rests on proximity to a known deposit rather than own results.

Why it applies: proximity is offered as the value premise: "21 initial broadly spaced drill holes were completed at the Stannex Prospect, approximately 1km northeast of the Gilmore"

MGRC003Mt Garnet · silverGrade: 5Grade Unit: g/tIntercept: 2 mView all details

Link to this fact

Identity

Hole ID: MGRC003
Project: Mt Garnet
Commodity: silver
Region: australia_qld
Reported Region: australia_qld
Ticker: KOB

Geometry

Grade: 5
Grade Unit: g/t
Intercept: 2 m
From: 42 m
To: 44 m
Hole Depth: 120 m
Intercept Depth: 42 m

Classification

Deposit Type: other
Program: exploration
Sample Type: drill
Group ID: MGRC003:42-44
Mining Method: underground

Location

Easting: 281161
Northing: 8060584
Elevation: 618 m
Azimuth: 46 °
Dip: -60 °
Loc. Confidence: high
Loc. Source: document

QA/QC

Laboratory: Intertek Minerals Townsville Laboratory and Intertek Genalysis Perth
QA/QC Disclosed: Yes
QP Signed: Yes
QA/QC Methods: standards, blanks, duplicates

Compositing

Cutoff Grade: 0.1
Cutoff Unit: % Sn
Dilution Disclosed: Yes
Max Dilution: 2 m

Review

Needs Review: No
Interp. Status: scored
Historical: No

Dates

Event date: 2026-10-13T00:00:00.000Z

Reasoning: The silver grade of 5 g/t over 2m is a trace amount and not economically significant, and the high detection limit for silver reduces confidence in the reported value.

Positive factors

Associated mineralization in a new discovery

Negative factors

Trace silver grade
True width not known
High detection limit for silver (10 g/t) reduces confidence in reported values

Tags used in scoring

QA/QC Disclosedpositive

Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).

Why it applies: qaqc_disclosed is true

Compositing Transparentpositive

Cut-off grade and internal dilution rules are clearly stated for reported intervals.

Why it applies: cutoff_grade and internal dilution are both stated

Nearology Playneutral

Value premise rests on proximity to a known deposit rather than own results.

Why it applies: proximity is offered as the value premise: "21 initial broadly spaced drill holes were completed at the Stannex Prospect, approximately 1km northeast of the Gilmore"

MGRC003Mt Garnet · indiumGrade: 1.8Grade Unit: g/tIntercept: 2 mView all details

Link to this fact

Identity

Hole ID: MGRC003
Project: Mt Garnet
Commodity: indium
Region: australia_qld
Reported Region: australia_qld
Ticker: KOB

Geometry

Grade: 1.8
Grade Unit: g/t
Intercept: 2 m
From: 42 m
To: 44 m
Hole Depth: 120 m
Intercept Depth: 42 m

Classification

Deposit Type: other
Program: exploration
Sample Type: drill
Group ID: MGRC003:42-44
Mining Method: underground

Location

Easting: 281161
Northing: 8060584
Elevation: 618 m
Azimuth: 46 °
Dip: -60 °
Loc. Confidence: high
Loc. Source: document

QA/QC

Laboratory: Intertek Minerals Townsville Laboratory and Intertek Genalysis Perth
QA/QC Disclosed: Yes
QP Signed: Yes
QA/QC Methods: standards, blanks, duplicates

Compositing

Cutoff Grade: 0.1
Cutoff Unit: % Sn
Dilution Disclosed: Yes
Max Dilution: 2 m

Review

Needs Review: No
Interp. Status: scored
Historical: No

Dates

Event date: 2026-10-13T00:00:00.000Z

Reasoning: The indium grade of 1.8 g/t over 2m is a trace amount and not economically significant, but is noted as associated mineralization.

Positive factors

Associated mineralization in a new discovery

Negative factors

Trace indium grade
True width not known

Tags used in scoring

QA/QC Disclosedpositive

Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).

Why it applies: qaqc_disclosed is true

Compositing Transparentpositive

Cut-off grade and internal dilution rules are clearly stated for reported intervals.

Why it applies: cutoff_grade and internal dilution are both stated

Nearology Playneutral

Value premise rests on proximity to a known deposit rather than own results.

Why it applies: proximity is offered as the value premise: "21 initial broadly spaced drill holes were completed at the Stannex Prospect, approximately 1km northeast of the Gilmore"

MGRC003Mt Garnet · tinGrade: 0.45Grade Unit: %Intercept: 1 mView all details

Link to this fact

Identity

Hole ID: MGRC003
Project: Mt Garnet
Commodity: tin
Region: australia_qld
Reported Region: australia_qld
Ticker: KOB

Geometry

Grade: 0.45
Grade Unit: %
Intercept: 1 m
From: 42 m
To: 43 m
Hole Depth: 120 m
Intercept Depth: 42 m

Classification

Deposit Type: other
Program: exploration
Sample Type: drill
Group ID: MGRC003:42-43
Mining Method: underground

Location

Easting: 281161
Northing: 8060584
Elevation: 618 m
Azimuth: 46 °
Dip: -60 °
Loc. Confidence: high
Loc. Source: document

QA/QC

Laboratory: Intertek Minerals Townsville Laboratory and Intertek Genalysis Perth
QA/QC Disclosed: Yes
QP Signed: Yes
QA/QC Methods: standards, blanks, duplicates

Compositing

Cutoff Grade: 0.4
Cutoff Unit: % Sn
Dilution Disclosed: Yes
Max Dilution: 2 m

Review

Needs Review: No
Interp. Status: scored
Historical: No

Dates

Event date: 2026-10-13T00:00:00.000Z

Reasoning: This included intercept of 1m at 0.45% Sn is below the weak grade threshold for tin in an underground context, but contributes to the overall mineralization footprint at Stannex.

Positive factors

Part of a maiden drilling program at Stannex Prospect, indicating new discovery

Negative factors

Grade is below the weak threshold for tin in an underground context
Narrow width of 1m
True width not known

Tags used in scoring

QA/QC Disclosedpositive

Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).

Why it applies: qaqc_disclosed is true

Compositing Transparentpositive

Cut-off grade and internal dilution rules are clearly stated for reported intervals.

Why it applies: cutoff_grade and internal dilution are both stated

Nearology Playneutral

Value premise rests on proximity to a known deposit rather than own results.

Why it applies: proximity is offered as the value premise: "21 initial broadly spaced drill holes were completed at the Stannex Prospect, approximately 1km northeast of the Gilmore"

MGRC003Mt Garnet · tungstenGrade: 16Grade Unit: ppmIntercept: 1 mView all details

Link to this fact

Identity

Hole ID: MGRC003
Project: Mt Garnet
Commodity: tungsten
Region: australia_qld
Reported Region: australia_qld
Ticker: KOB

Geometry

Grade: 16
Grade Unit: ppm
Intercept: 1 m
From: 42 m
To: 43 m
Hole Depth: 120 m
Intercept Depth: 42 m

Classification

Deposit Type: other
Program: exploration
Sample Type: drill
Group ID: MGRC003:42-43
Mining Method: underground

Location

Easting: 281161
Northing: 8060584
Elevation: 618 m
Azimuth: 46 °
Dip: -60 °
Loc. Confidence: high
Loc. Source: document

QA/QC

Laboratory: Intertek Minerals Townsville Laboratory and Intertek Genalysis Perth
QA/QC Disclosed: Yes
QP Signed: Yes
QA/QC Methods: standards, blanks, duplicates

Compositing

Cutoff Grade: 0.4
Cutoff Unit: % Sn
Dilution Disclosed: Yes
Max Dilution: 2 m

Review

Needs Review: No
Interp. Status: scored
Historical: No

Dates

Event date: 2026-10-13T00:00:00.000Z

Reasoning: The tungsten grade of 16 ppm over 1m is very low and unlikely to be economic, but is noted as associated mineralization.

Positive factors

Associated mineralization in a new discovery

Negative factors

Very low tungsten grade
True width not known

Tags used in scoring

QA/QC Disclosedpositive

Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).

Why it applies: qaqc_disclosed is true

Compositing Transparentpositive

Cut-off grade and internal dilution rules are clearly stated for reported intervals.

Why it applies: cutoff_grade and internal dilution are both stated

Nearology Playneutral

Value premise rests on proximity to a known deposit rather than own results.

Why it applies: proximity is offered as the value premise: "21 initial broadly spaced drill holes were completed at the Stannex Prospect, approximately 1km northeast of the Gilmore"

MGRC003Mt Garnet · copperGrade: 0.05Grade Unit: %Intercept: 1 mView all details

Link to this fact

Identity

Hole ID: MGRC003
Project: Mt Garnet
Commodity: copper
Region: australia_qld
Reported Region: australia_qld
Ticker: KOB

Geometry

Grade: 0.05
Grade Unit: %
Intercept: 1 m
From: 42 m
To: 43 m
Hole Depth: 120 m
Intercept Depth: 42 m

Classification

Deposit Type: other
Program: exploration
Sample Type: drill
Group ID: MGRC003:42-43
Mining Method: underground

Location

Easting: 281161
Northing: 8060584
Elevation: 618 m
Azimuth: 46 °
Dip: -60 °
Loc. Confidence: high
Loc. Source: document

QA/QC

Laboratory: Intertek Minerals Townsville Laboratory and Intertek Genalysis Perth
QA/QC Disclosed: Yes
QP Signed: Yes
QA/QC Methods: standards, blanks, duplicates

Compositing

Cutoff Grade: 0.4
Cutoff Unit: % Sn
Dilution Disclosed: Yes
Max Dilution: 2 m

Review

Needs Review: No
Interp. Status: scored
Historical: No

Dates

Event date: 2026-10-13T00:00:00.000Z

Reasoning: The copper grade of 0.05% over 1m is a trace amount and not economically significant, but is noted as associated mineralization.

Positive factors

Associated mineralization in a new discovery

Negative factors

Trace copper grade
True width not known

Tags used in scoring

QA/QC Disclosedpositive

Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).

Why it applies: qaqc_disclosed is true

Compositing Transparentpositive

Cut-off grade and internal dilution rules are clearly stated for reported intervals.

Why it applies: cutoff_grade and internal dilution are both stated

Nearology Playneutral

Value premise rests on proximity to a known deposit rather than own results.

Why it applies: proximity is offered as the value premise: "21 initial broadly spaced drill holes were completed at the Stannex Prospect, approximately 1km northeast of the Gilmore"

MGRC003Mt Garnet · zincGrade: 0.03Grade Unit: %Intercept: 1 mView all details

Link to this fact

Identity

Hole ID: MGRC003
Project: Mt Garnet
Commodity: zinc
Region: australia_qld
Reported Region: australia_qld
Ticker: KOB

Geometry

Grade: 0.03
Grade Unit: %
Intercept: 1 m
From: 42 m
To: 43 m
Hole Depth: 120 m
Intercept Depth: 42 m

Classification

Deposit Type: other
Program: exploration
Sample Type: drill
Group ID: MGRC003:42-43
Mining Method: underground

Location

Easting: 281161
Northing: 8060584
Elevation: 618 m
Azimuth: 46 °
Dip: -60 °
Loc. Confidence: high
Loc. Source: document

QA/QC

Laboratory: Intertek Minerals Townsville Laboratory and Intertek Genalysis Perth
QA/QC Disclosed: Yes
QP Signed: Yes
QA/QC Methods: standards, blanks, duplicates

Compositing

Cutoff Grade: 0.4
Cutoff Unit: % Sn
Dilution Disclosed: Yes
Max Dilution: 2 m

Review

Needs Review: No
Interp. Status: scored
Historical: No

Dates

Event date: 2026-10-13T00:00:00.000Z

Reasoning: The zinc grade of 0.03% over 1m is a trace amount and not economically significant, but is noted as associated mineralization.

Positive factors

Associated mineralization in a new discovery

Negative factors

Trace zinc grade
True width not known

Tags used in scoring

QA/QC Disclosedpositive

Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).

Why it applies: qaqc_disclosed is true

Compositing Transparentpositive

Cut-off grade and internal dilution rules are clearly stated for reported intervals.

Why it applies: cutoff_grade and internal dilution are both stated

Nearology Playneutral

Value premise rests on proximity to a known deposit rather than own results.

Why it applies: proximity is offered as the value premise: "21 initial broadly spaced drill holes were completed at the Stannex Prospect, approximately 1km northeast of the Gilmore"

MGRC003Mt Garnet · silverGrade: 5Grade Unit: g/tIntercept: 1 mView all details

Link to this fact

Identity

Hole ID: MGRC003
Project: Mt Garnet
Commodity: silver
Region: australia_qld
Reported Region: australia_qld
Ticker: KOB

Geometry

Grade: 5
Grade Unit: g/t
Intercept: 1 m
From: 42 m
To: 43 m
Hole Depth: 120 m
Intercept Depth: 42 m

Classification

Deposit Type: other
Program: exploration
Sample Type: drill
Group ID: MGRC003:42-43
Mining Method: underground

Location

Easting: 281161
Northing: 8060584
Elevation: 618 m
Azimuth: 46 °
Dip: -60 °
Loc. Confidence: high
Loc. Source: document

QA/QC

Laboratory: Intertek Minerals Townsville Laboratory and Intertek Genalysis Perth
QA/QC Disclosed: Yes
QP Signed: Yes
QA/QC Methods: standards, blanks, duplicates

Compositing

Cutoff Grade: 0.4
Cutoff Unit: % Sn
Dilution Disclosed: Yes
Max Dilution: 2 m

Review

Needs Review: No
Interp. Status: scored
Historical: No

Dates

Event date: 2026-10-13T00:00:00.000Z

Reasoning: The silver grade of 5 g/t over 1m is a trace amount and not economically significant, and the high detection limit for silver reduces confidence in the reported value.

Positive factors

Associated mineralization in a new discovery

Negative factors

Trace silver grade
True width not known
High detection limit for silver (10 g/t) reduces confidence in reported values

Tags used in scoring

QA/QC Disclosedpositive

Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).

Why it applies: qaqc_disclosed is true

Compositing Transparentpositive

Cut-off grade and internal dilution rules are clearly stated for reported intervals.

Why it applies: cutoff_grade and internal dilution are both stated

Nearology Playneutral

Value premise rests on proximity to a known deposit rather than own results.

Why it applies: proximity is offered as the value premise: "21 initial broadly spaced drill holes were completed at the Stannex Prospect, approximately 1km northeast of the Gilmore"

MGRC003Mt Garnet · indiumGrade: 1.7Grade Unit: g/tIntercept: 1 mView all details

Link to this fact

Identity

Hole ID: MGRC003
Project: Mt Garnet
Commodity: indium
Region: australia_qld
Reported Region: australia_qld
Ticker: KOB

Geometry

Grade: 1.7
Grade Unit: g/t
Intercept: 1 m
From: 42 m
To: 43 m
Hole Depth: 120 m
Intercept Depth: 42 m

Classification

Deposit Type: other
Program: exploration
Sample Type: drill
Group ID: MGRC003:42-43
Mining Method: underground

Location

Easting: 281161
Northing: 8060584
Elevation: 618 m
Azimuth: 46 °
Dip: -60 °
Loc. Confidence: high
Loc. Source: document

QA/QC

Laboratory: Intertek Minerals Townsville Laboratory and Intertek Genalysis Perth
QA/QC Disclosed: Yes
QP Signed: Yes
QA/QC Methods: standards, blanks, duplicates

Compositing

Cutoff Grade: 0.4
Cutoff Unit: % Sn
Dilution Disclosed: Yes
Max Dilution: 2 m

Review

Needs Review: No
Interp. Status: scored
Historical: No

Dates

Event date: 2026-10-13T00:00:00.000Z

Reasoning: The indium grade of 1.7 g/t over 1m is a trace amount and not economically significant, but is noted as associated mineralization.

Positive factors

Associated mineralization in a new discovery

Negative factors

Trace indium grade
True width not known

Tags used in scoring

QA/QC Disclosedpositive

Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).

Why it applies: qaqc_disclosed is true

Compositing Transparentpositive

Cut-off grade and internal dilution rules are clearly stated for reported intervals.

Why it applies: cutoff_grade and internal dilution are both stated

Nearology Playneutral

Value premise rests on proximity to a known deposit rather than own results.

Why it applies: proximity is offered as the value premise: "21 initial broadly spaced drill holes were completed at the Stannex Prospect, approximately 1km northeast of the Gilmore"

MGRC005Mt Garnet · tinGrade: 0.4Grade Unit: %Intercept: 1 mView all details

Link to this fact

Identity

Hole ID: MGRC005
Project: Mt Garnet
Commodity: tin
Region: australia_qld
Reported Region: australia_qld
Ticker: KOB

Geometry

Grade: 0.4
Grade Unit: %
Intercept: 1 m
From: 8 m
To: 9 m
Hole Depth: 80 m
Intercept Depth: 8 m

Classification

Deposit Type: other
Program: exploration
Sample Type: drill
Group ID: MGRC005:8-9
Mining Method: underground

Location

Easting: 281365
Northing: 8060448
Elevation: 624 m
Azimuth: 47 °
Dip: -60 °
Loc. Confidence: high
Loc. Source: document

QA/QC

Laboratory: Intertek Minerals Townsville Laboratory and Intertek Genalysis Perth
QA/QC Disclosed: Yes
QP Signed: Yes
QA/QC Methods: standards, blanks, duplicates

Compositing

Cutoff Grade: 0.1
Cutoff Unit: % Sn
Dilution Disclosed: Yes
Max Dilution: 2 m

Review

Needs Review: No
Interp. Status: scored
Historical: No

Dates

Event date: 2026-10-13T00:00:00.000Z

Reasoning: This intercept of 1m at 0.40% Sn is below the weak grade threshold for tin in an underground context, but contributes to the overall mineralization footprint at Stannex.

Positive factors

Part of a maiden drilling program at Stannex Prospect, indicating new discovery

Negative factors

Grade is below the weak threshold for tin in an underground context
Narrow width of 1m
True width not known

Tags used in scoring

QA/QC Disclosedpositive

Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).

Why it applies: qaqc_disclosed is true

Compositing Transparentpositive

Cut-off grade and internal dilution rules are clearly stated for reported intervals.

Why it applies: cutoff_grade and internal dilution are both stated

Nearology Playneutral

Value premise rests on proximity to a known deposit rather than own results.

Why it applies: proximity is offered as the value premise: "21 initial broadly spaced drill holes were completed at the Stannex Prospect, approximately 1km northeast of the Gilmore"

MGRC005Mt Garnet · tungstenGrade: 24Grade Unit: ppmIntercept: 1 mView all details

Link to this fact

Identity

Hole ID: MGRC005
Project: Mt Garnet
Commodity: tungsten
Region: australia_qld
Reported Region: australia_qld
Ticker: KOB

Geometry

Grade: 24
Grade Unit: ppm
Intercept: 1 m
From: 8 m
To: 9 m
Hole Depth: 80 m
Intercept Depth: 8 m

Classification

Deposit Type: other
Program: exploration
Sample Type: drill
Group ID: MGRC005:8-9
Mining Method: underground

Location

Easting: 281365
Northing: 8060448
Elevation: 624 m
Azimuth: 47 °
Dip: -60 °
Loc. Confidence: high
Loc. Source: document

QA/QC

Laboratory: Intertek Minerals Townsville Laboratory and Intertek Genalysis Perth
QA/QC Disclosed: Yes
QP Signed: Yes
QA/QC Methods: standards, blanks, duplicates

Compositing

Cutoff Grade: 0.1
Cutoff Unit: % Sn
Dilution Disclosed: Yes
Max Dilution: 2 m

Review

Needs Review: No
Interp. Status: scored
Historical: No

Dates

Event date: 2026-10-13T00:00:00.000Z

Reasoning: The tungsten grade of 24 ppm over 1m is very low and unlikely to be economic, but is noted as associated mineralization.

Positive factors

Associated mineralization in a new discovery

Negative factors

Very low tungsten grade
True width not known

Tags used in scoring

QA/QC Disclosedpositive

Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).

Why it applies: qaqc_disclosed is true

Compositing Transparentpositive

Cut-off grade and internal dilution rules are clearly stated for reported intervals.

Why it applies: cutoff_grade and internal dilution are both stated

Nearology Playneutral

Value premise rests on proximity to a known deposit rather than own results.

Why it applies: proximity is offered as the value premise: "21 initial broadly spaced drill holes were completed at the Stannex Prospect, approximately 1km northeast of the Gilmore"

MGRC005Mt Garnet · copperGrade: 0.01Grade Unit: %Intercept: 1 mView all details

Link to this fact

Identity

Hole ID: MGRC005
Project: Mt Garnet
Commodity: copper
Region: australia_qld
Reported Region: australia_qld
Ticker: KOB

Geometry

Grade: 0.01
Grade Unit: %
Intercept: 1 m
From: 8 m
To: 9 m
Hole Depth: 80 m
Intercept Depth: 8 m

Classification

Deposit Type: other
Program: exploration
Sample Type: drill
Group ID: MGRC005:8-9
Mining Method: underground

Location

Easting: 281365
Northing: 8060448
Elevation: 624 m
Azimuth: 47 °
Dip: -60 °
Loc. Confidence: high
Loc. Source: document

QA/QC

Laboratory: Intertek Minerals Townsville Laboratory and Intertek Genalysis Perth
QA/QC Disclosed: Yes
QP Signed: Yes
QA/QC Methods: standards, blanks, duplicates

Compositing

Cutoff Grade: 0.1
Cutoff Unit: % Sn
Dilution Disclosed: Yes
Max Dilution: 2 m

Review

Needs Review: No
Interp. Status: scored
Historical: No

Dates

Event date: 2026-10-13T00:00:00.000Z

Reasoning: The copper grade of 0.01% over 1m is a trace amount and not economically significant, but is noted as associated mineralization.

Positive factors

Associated mineralization in a new discovery

Negative factors

Trace copper grade
True width not known

Tags used in scoring

QA/QC Disclosedpositive

Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).

Why it applies: qaqc_disclosed is true

Compositing Transparentpositive

Cut-off grade and internal dilution rules are clearly stated for reported intervals.

Why it applies: cutoff_grade and internal dilution are both stated

Nearology Playneutral

Value premise rests on proximity to a known deposit rather than own results.

Why it applies: proximity is offered as the value premise: "21 initial broadly spaced drill holes were completed at the Stannex Prospect, approximately 1km northeast of the Gilmore"

MGRC005Mt Garnet · zincGrade: 0.07Grade Unit: %Intercept: 1 mView all details

Link to this fact

Identity

Hole ID: MGRC005
Project: Mt Garnet
Commodity: zinc
Region: australia_qld
Reported Region: australia_qld
Ticker: KOB

Geometry

Grade: 0.07
Grade Unit: %
Intercept: 1 m
From: 8 m
To: 9 m
Hole Depth: 80 m
Intercept Depth: 8 m

Classification

Deposit Type: other
Program: exploration
Sample Type: drill
Group ID: MGRC005:8-9
Mining Method: underground

Location

Easting: 281365
Northing: 8060448
Elevation: 624 m
Azimuth: 47 °
Dip: -60 °
Loc. Confidence: high
Loc. Source: document

QA/QC

Laboratory: Intertek Minerals Townsville Laboratory and Intertek Genalysis Perth
QA/QC Disclosed: Yes
QP Signed: Yes
QA/QC Methods: standards, blanks, duplicates

Compositing

Cutoff Grade: 0.1
Cutoff Unit: % Sn
Dilution Disclosed: Yes
Max Dilution: 2 m

Review

Needs Review: No
Interp. Status: scored
Historical: No

Dates

Event date: 2026-10-13T00:00:00.000Z

Reasoning: The zinc grade of 0.07% over 1m is a trace amount and not economically significant, but is noted as associated mineralization.

Positive factors

Associated mineralization in a new discovery

Negative factors

Trace zinc grade
True width not known

Tags used in scoring

QA/QC Disclosedpositive

Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).

Why it applies: qaqc_disclosed is true

Compositing Transparentpositive

Cut-off grade and internal dilution rules are clearly stated for reported intervals.

Why it applies: cutoff_grade and internal dilution are both stated

Nearology Playneutral

Value premise rests on proximity to a known deposit rather than own results.

Why it applies: proximity is offered as the value premise: "21 initial broadly spaced drill holes were completed at the Stannex Prospect, approximately 1km northeast of the Gilmore"

MGRC005Mt Garnet · silverGrade: 5Grade Unit: g/tIntercept: 1 mView all details

Link to this fact

Identity

Hole ID: MGRC005
Project: Mt Garnet
Commodity: silver
Region: australia_qld
Reported Region: australia_qld
Ticker: KOB

Geometry

Grade: 5
Grade Unit: g/t
Intercept: 1 m
From: 8 m
To: 9 m
Hole Depth: 80 m
Intercept Depth: 8 m

Classification

Deposit Type: other
Program: exploration
Sample Type: drill
Group ID: MGRC005:8-9
Mining Method: underground

Location

Easting: 281365
Northing: 8060448
Elevation: 624 m
Azimuth: 47 °
Dip: -60 °
Loc. Confidence: high
Loc. Source: document

QA/QC

Laboratory: Intertek Minerals Townsville Laboratory and Intertek Genalysis Perth
QA/QC Disclosed: Yes
QP Signed: Yes
QA/QC Methods: standards, blanks, duplicates

Compositing

Cutoff Grade: 0.1
Cutoff Unit: % Sn
Dilution Disclosed: Yes
Max Dilution: 2 m

Review

Needs Review: No
Interp. Status: scored
Historical: No

Dates

Event date: 2026-10-13T00:00:00.000Z

Reasoning: The silver grade of 5 g/t over 1m is a trace amount and not economically significant, and the high detection limit for silver reduces confidence in the reported value.

Positive factors

Associated mineralization in a new discovery

Negative factors

Trace silver grade
True width not known
High detection limit for silver (10 g/t) reduces confidence in reported values

Tags used in scoring

QA/QC Disclosedpositive

Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).

Why it applies: qaqc_disclosed is true

Compositing Transparentpositive

Cut-off grade and internal dilution rules are clearly stated for reported intervals.

Why it applies: cutoff_grade and internal dilution are both stated

Nearology Playneutral

Value premise rests on proximity to a known deposit rather than own results.

Why it applies: proximity is offered as the value premise: "21 initial broadly spaced drill holes were completed at the Stannex Prospect, approximately 1km northeast of the Gilmore"

MGRC005Mt Garnet · indiumGrade: 2.5Grade Unit: g/tIntercept: 1 mView all details

Link to this fact

Identity

Hole ID: MGRC005
Project: Mt Garnet
Commodity: indium
Region: australia_qld
Reported Region: australia_qld
Ticker: KOB

Geometry

Grade: 2.5
Grade Unit: g/t
Intercept: 1 m
From: 8 m
To: 9 m
Hole Depth: 80 m
Intercept Depth: 8 m

Classification

Deposit Type: other
Program: exploration
Sample Type: drill
Group ID: MGRC005:8-9
Mining Method: underground

Location

Easting: 281365
Northing: 8060448
Elevation: 624 m
Azimuth: 47 °
Dip: -60 °
Loc. Confidence: high
Loc. Source: document

QA/QC

Laboratory: Intertek Minerals Townsville Laboratory and Intertek Genalysis Perth
QA/QC Disclosed: Yes
QP Signed: Yes
QA/QC Methods: standards, blanks, duplicates

Compositing

Cutoff Grade: 0.1
Cutoff Unit: % Sn
Dilution Disclosed: Yes
Max Dilution: 2 m

Review

Needs Review: No
Interp. Status: scored
Historical: No

Dates

Event date: 2026-10-13T00:00:00.000Z

Reasoning: The indium grade of 2.5 g/t over 1m is a trace amount and not economically significant, but is noted as associated mineralization.

Positive factors

Associated mineralization in a new discovery

Negative factors

Trace indium grade
True width not known

Tags used in scoring

QA/QC Disclosedpositive

Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).

Why it applies: qaqc_disclosed is true

Compositing Transparentpositive

Cut-off grade and internal dilution rules are clearly stated for reported intervals.

Why it applies: cutoff_grade and internal dilution are both stated

Nearology Playneutral

Value premise rests on proximity to a known deposit rather than own results.

Why it applies: proximity is offered as the value premise: "21 initial broadly spaced drill holes were completed at the Stannex Prospect, approximately 1km northeast of the Gilmore"

MGRC005Mt Garnet · tinGrade: 0.21Grade Unit: %Intercept: 2 mView all details

Link to this fact

Identity

Hole ID: MGRC005
Project: Mt Garnet
Commodity: tin
Region: australia_qld
Reported Region: australia_qld
Ticker: KOB

Geometry

Grade: 0.21
Grade Unit: %
Intercept: 2 m
From: 15 m
To: 17 m
Hole Depth: 80 m
Intercept Depth: 8 m

Classification

Deposit Type: other
Program: exploration
Sample Type: drill
Group ID: MGRC005:15-17
Mining Method: underground

Location

Easting: 281365
Northing: 8060448
Elevation: 624 m
Azimuth: 47 °
Dip: -60 °
Loc. Confidence: high
Loc. Source: document

QA/QC

Laboratory: Intertek Minerals Townsville Laboratory and Intertek Genalysis Perth
QA/QC Disclosed: Yes
QP Signed: Yes
QA/QC Methods: standards, blanks, duplicates

Compositing

Cutoff Grade: 0.1
Cutoff Unit: % Sn
Dilution Disclosed: Yes
Max Dilution: 2 m

Review

Needs Review: No
Interp. Status: scored
Historical: No

Dates

Event date: 2026-10-13T00:00:00.000Z

Reasoning: This intercept of 2m at 0.21% Sn is below the weak grade threshold for tin in an underground context, but contributes to the overall mineralization footprint at Stannex.

Positive factors

Part of a maiden drilling program at Stannex Prospect, indicating new discovery

Negative factors

Grade is below the weak threshold for tin in an underground context
Narrow width of 2m
True width not known

Tags used in scoring

QA/QC Disclosedpositive

Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).

Why it applies: qaqc_disclosed is true

Compositing Transparentpositive

Cut-off grade and internal dilution rules are clearly stated for reported intervals.

Why it applies: cutoff_grade and internal dilution are both stated

Nearology Playneutral

Value premise rests on proximity to a known deposit rather than own results.

Why it applies: proximity is offered as the value premise: "21 initial broadly spaced drill holes were completed at the Stannex Prospect, approximately 1km northeast of the Gilmore"

MGRC005Mt Garnet · tungstenGrade: 47Grade Unit: ppmIntercept: 2 mView all details

Link to this fact

Identity

Hole ID: MGRC005
Project: Mt Garnet
Commodity: tungsten
Region: australia_qld
Reported Region: australia_qld
Ticker: KOB

Geometry

Grade: 47
Grade Unit: ppm
Intercept: 2 m
From: 15 m
To: 17 m
Hole Depth: 80 m
Intercept Depth: 8 m

Classification

Deposit Type: other
Program: exploration
Sample Type: drill
Group ID: MGRC005:15-17
Mining Method: underground

Location

Easting: 281365
Northing: 8060448
Elevation: 624 m
Azimuth: 47 °
Dip: -60 °
Loc. Confidence: high
Loc. Source: document

QA/QC

Laboratory: Intertek Minerals Townsville Laboratory and Intertek Genalysis Perth
QA/QC Disclosed: Yes
QP Signed: Yes
QA/QC Methods: standards, blanks, duplicates

Compositing

Cutoff Grade: 0.1
Cutoff Unit: % Sn
Dilution Disclosed: Yes
Max Dilution: 2 m

Review

Needs Review: No
Interp. Status: scored
Historical: No

Dates

Event date: 2026-10-13T00:00:00.000Z

Reasoning: The tungsten grade of 47 ppm over 2m is very low and unlikely to be economic, but is noted as associated mineralization.

Positive factors

Associated mineralization in a new discovery

Negative factors

Very low tungsten grade
True width not known

Tags used in scoring

QA/QC Disclosedpositive

Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).

Why it applies: qaqc_disclosed is true

Compositing Transparentpositive

Cut-off grade and internal dilution rules are clearly stated for reported intervals.

Why it applies: cutoff_grade and internal dilution are both stated

Nearology Playneutral

Value premise rests on proximity to a known deposit rather than own results.

Why it applies: proximity is offered as the value premise: "21 initial broadly spaced drill holes were completed at the Stannex Prospect, approximately 1km northeast of the Gilmore"

MGRC005Mt Garnet · copperGrade: 0.01Grade Unit: %Intercept: 2 mView all details

Link to this fact

Identity

Hole ID: MGRC005
Project: Mt Garnet
Commodity: copper
Region: australia_qld
Reported Region: australia_qld
Ticker: KOB

Geometry

Grade: 0.01
Grade Unit: %
Intercept: 2 m
From: 15 m
To: 17 m
Hole Depth: 80 m
Intercept Depth: 8 m

Classification

Deposit Type: other
Program: exploration
Sample Type: drill
Group ID: MGRC005:15-17
Mining Method: underground

Location

Easting: 281365
Northing: 8060448
Elevation: 624 m
Azimuth: 47 °
Dip: -60 °
Loc. Confidence: high
Loc. Source: document

QA/QC

Laboratory: Intertek Minerals Townsville Laboratory and Intertek Genalysis Perth
QA/QC Disclosed: Yes
QP Signed: Yes
QA/QC Methods: standards, blanks, duplicates

Compositing

Cutoff Grade: 0.1
Cutoff Unit: % Sn
Dilution Disclosed: Yes
Max Dilution: 2 m

Review

Needs Review: No
Interp. Status: scored
Historical: No

Dates

Event date: 2026-10-13T00:00:00.000Z

Reasoning: The copper grade of 0.01% over 2m is a trace amount and not economically significant, but is noted as associated mineralization.

Positive factors

Associated mineralization in a new discovery

Negative factors

Trace copper grade
True width not known

Tags used in scoring

QA/QC Disclosedpositive

Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).

Why it applies: qaqc_disclosed is true

Compositing Transparentpositive

Cut-off grade and internal dilution rules are clearly stated for reported intervals.

Why it applies: cutoff_grade and internal dilution are both stated

Nearology Playneutral

Value premise rests on proximity to a known deposit rather than own results.

Why it applies: proximity is offered as the value premise: "21 initial broadly spaced drill holes were completed at the Stannex Prospect, approximately 1km northeast of the Gilmore"

MGRC005Mt Garnet · zincGrade: 0.08Grade Unit: %Intercept: 2 mView all details

Link to this fact

Identity

Hole ID: MGRC005
Project: Mt Garnet
Commodity: zinc
Region: australia_qld
Reported Region: australia_qld
Ticker: KOB

Geometry

Grade: 0.08
Grade Unit: %
Intercept: 2 m
From: 15 m
To: 17 m
Hole Depth: 80 m
Intercept Depth: 8 m

Classification

Deposit Type: other
Program: exploration
Sample Type: drill
Group ID: MGRC005:15-17
Mining Method: underground

Location

Easting: 281365
Northing: 8060448
Elevation: 624 m
Azimuth: 47 °
Dip: -60 °
Loc. Confidence: high
Loc. Source: document

QA/QC

Laboratory: Intertek Minerals Townsville Laboratory and Intertek Genalysis Perth
QA/QC Disclosed: Yes
QP Signed: Yes
QA/QC Methods: standards, blanks, duplicates

Compositing

Cutoff Grade: 0.1
Cutoff Unit: % Sn
Dilution Disclosed: Yes
Max Dilution: 2 m

Review

Needs Review: No
Interp. Status: scored
Historical: No

Dates

Event date: 2026-10-13T00:00:00.000Z

Reasoning: The zinc grade of 0.08% over 2m is a trace amount and not economically significant, but is noted as associated mineralization.

Positive factors

Associated mineralization in a new discovery

Negative factors

Trace zinc grade
True width not known

Tags used in scoring

QA/QC Disclosedpositive

Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).

Why it applies: qaqc_disclosed is true

Compositing Transparentpositive

Cut-off grade and internal dilution rules are clearly stated for reported intervals.

Why it applies: cutoff_grade and internal dilution are both stated

Nearology Playneutral

Value premise rests on proximity to a known deposit rather than own results.

Why it applies: proximity is offered as the value premise: "21 initial broadly spaced drill holes were completed at the Stannex Prospect, approximately 1km northeast of the Gilmore"

MGRC005Mt Garnet · silverGrade: 5Grade Unit: g/tIntercept: 2 mView all details

Link to this fact

Identity

Hole ID: MGRC005
Project: Mt Garnet
Commodity: silver
Region: australia_qld
Reported Region: australia_qld
Ticker: KOB

Geometry

Grade: 5
Grade Unit: g/t
Intercept: 2 m
From: 15 m
To: 17 m
Hole Depth: 80 m
Intercept Depth: 8 m

Classification

Deposit Type: other
Program: exploration
Sample Type: drill
Group ID: MGRC005:15-17
Mining Method: underground

Location

Easting: 281365
Northing: 8060448
Elevation: 624 m
Azimuth: 47 °
Dip: -60 °
Loc. Confidence: high
Loc. Source: document

QA/QC

Laboratory: Intertek Minerals Townsville Laboratory and Intertek Genalysis Perth
QA/QC Disclosed: Yes
QP Signed: Yes
QA/QC Methods: standards, blanks, duplicates

Compositing

Cutoff Grade: 0.1
Cutoff Unit: % Sn
Dilution Disclosed: Yes
Max Dilution: 2 m

Review

Needs Review: No
Interp. Status: scored
Historical: No

Dates

Event date: 2026-10-13T00:00:00.000Z

Reasoning: The silver grade of 5 g/t over 2m is a trace amount and not economically significant, and the high detection limit for silver reduces confidence in the reported value.

Positive factors

Associated mineralization in a new discovery

Negative factors

Trace silver grade
True width not known
High detection limit for silver (10 g/t) reduces confidence in reported values

Tags used in scoring

QA/QC Disclosedpositive

Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).

Why it applies: qaqc_disclosed is true

Compositing Transparentpositive

Cut-off grade and internal dilution rules are clearly stated for reported intervals.

Why it applies: cutoff_grade and internal dilution are both stated

Nearology Playneutral

Value premise rests on proximity to a known deposit rather than own results.

Why it applies: proximity is offered as the value premise: "21 initial broadly spaced drill holes were completed at the Stannex Prospect, approximately 1km northeast of the Gilmore"

MGRC005Mt Garnet · indiumGrade: 2.6Grade Unit: g/tIntercept: 2 mView all details

Link to this fact

Identity

Hole ID: MGRC005
Project: Mt Garnet
Commodity: indium
Region: australia_qld
Reported Region: australia_qld
Ticker: KOB

Geometry

Grade: 2.6
Grade Unit: g/t
Intercept: 2 m
From: 15 m
To: 17 m
Hole Depth: 80 m
Intercept Depth: 8 m

Classification

Deposit Type: other
Program: exploration
Sample Type: drill
Group ID: MGRC005:15-17
Mining Method: underground

Location

Easting: 281365
Northing: 8060448
Elevation: 624 m
Azimuth: 47 °
Dip: -60 °
Loc. Confidence: high
Loc. Source: document

QA/QC

Laboratory: Intertek Minerals Townsville Laboratory and Intertek Genalysis Perth
QA/QC Disclosed: Yes
QP Signed: Yes
QA/QC Methods: standards, blanks, duplicates

Compositing

Cutoff Grade: 0.1
Cutoff Unit: % Sn
Dilution Disclosed: Yes
Max Dilution: 2 m

Review

Needs Review: No
Interp. Status: scored
Historical: No

Dates

Event date: 2026-10-13T00:00:00.000Z

Reasoning: The indium grade of 2.6 g/t over 2m is a trace amount and not economically significant, but is noted as associated mineralization.

Positive factors

Associated mineralization in a new discovery

Negative factors

Trace indium grade
True width not known

Tags used in scoring

QA/QC Disclosedpositive

Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).

Why it applies: qaqc_disclosed is true

Compositing Transparentpositive

Cut-off grade and internal dilution rules are clearly stated for reported intervals.

Why it applies: cutoff_grade and internal dilution are both stated

Nearology Playneutral

Value premise rests on proximity to a known deposit rather than own results.

Why it applies: proximity is offered as the value premise: "21 initial broadly spaced drill holes were completed at the Stannex Prospect, approximately 1km northeast of the Gilmore"

MGRC005Mt Garnet · tinGrade: 0.14Grade Unit: %Intercept: 1 mView all details

Link to this fact

Identity

Hole ID: MGRC005
Project: Mt Garnet
Commodity: tin
Region: australia_qld
Reported Region: australia_qld
Ticker: KOB

Geometry

Grade: 0.14
Grade Unit: %
Intercept: 1 m
From: 20 m
To: 21 m
Hole Depth: 80 m
Intercept Depth: 8 m

Classification

Deposit Type: other
Program: exploration
Sample Type: drill
Group ID: MGRC005:20-21
Mining Method: underground

Location

Easting: 281365
Northing: 8060448
Elevation: 624 m
Azimuth: 47 °
Dip: -60 °
Loc. Confidence: high
Loc. Source: document

QA/QC

Laboratory: Intertek Minerals Townsville Laboratory and Intertek Genalysis Perth
QA/QC Disclosed: Yes
QP Signed: Yes
QA/QC Methods: standards, blanks, duplicates

Compositing

Cutoff Grade: 0.1
Cutoff Unit: % Sn
Dilution Disclosed: Yes
Max Dilution: 2 m

Review

Needs Review: No
Interp. Status: scored
Historical: No

Dates

Event date: 2026-10-13T00:00:00.000Z

Reasoning: This intercept of 1m at 0.14% Sn is below the weak grade threshold for tin in an underground context, but contributes to the overall mineralization footprint at Stannex.

Positive factors

Part of a maiden drilling program at Stannex Prospect, indicating new discovery

Negative factors

Grade is below the weak threshold for tin in an underground context
Narrow width of 1m
True width not known

Tags used in scoring

QA/QC Disclosedpositive

Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).

Why it applies: qaqc_disclosed is true

Compositing Transparentpositive

Cut-off grade and internal dilution rules are clearly stated for reported intervals.

Why it applies: cutoff_grade and internal dilution are both stated

Nearology Playneutral

Value premise rests on proximity to a known deposit rather than own results.

Why it applies: proximity is offered as the value premise: "21 initial broadly spaced drill holes were completed at the Stannex Prospect, approximately 1km northeast of the Gilmore"

MGRC005Mt Garnet · tungstenGrade: 10Grade Unit: ppmIntercept: 1 mView all details

Link to this fact

Identity

Hole ID: MGRC005
Project: Mt Garnet
Commodity: tungsten
Region: australia_qld
Reported Region: australia_qld
Ticker: KOB

Geometry

Grade: 10
Grade Unit: ppm
Intercept: 1 m
From: 20 m
To: 21 m
Hole Depth: 80 m
Intercept Depth: 8 m

Classification

Deposit Type: other
Program: exploration
Sample Type: drill
Group ID: MGRC005:20-21
Mining Method: underground

Location

Easting: 281365
Northing: 8060448
Elevation: 624 m
Azimuth: 47 °
Dip: -60 °
Loc. Confidence: high
Loc. Source: document

QA/QC

Laboratory: Intertek Minerals Townsville Laboratory and Intertek Genalysis Perth
QA/QC Disclosed: Yes
QP Signed: Yes
QA/QC Methods: standards, blanks, duplicates

Compositing

Cutoff Grade: 0.1
Cutoff Unit: % Sn
Dilution Disclosed: Yes
Max Dilution: 2 m

Review

Needs Review: No
Interp. Status: scored
Historical: No

Dates

Event date: 2026-10-13T00:00:00.000Z

Reasoning: The tungsten grade of 10 ppm over 1m is very low and unlikely to be economic, but is noted as associated mineralization.

Positive factors

Associated mineralization in a new discovery

Negative factors

Very low tungsten grade
True width not known

Tags used in scoring

QA/QC Disclosedpositive

Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).

Why it applies: qaqc_disclosed is true

Compositing Transparentpositive

Cut-off grade and internal dilution rules are clearly stated for reported intervals.

Why it applies: cutoff_grade and internal dilution are both stated

Nearology Playneutral

Value premise rests on proximity to a known deposit rather than own results.

Why it applies: proximity is offered as the value premise: "21 initial broadly spaced drill holes were completed at the Stannex Prospect, approximately 1km northeast of the Gilmore"

MGRC005Mt Garnet · copperGrade: 0.01Grade Unit: %Intercept: 1 mView all details

Link to this fact

Identity

Hole ID: MGRC005
Project: Mt Garnet
Commodity: copper
Region: australia_qld
Reported Region: australia_qld
Ticker: KOB

Geometry

Grade: 0.01
Grade Unit: %
Intercept: 1 m
From: 20 m
To: 21 m
Hole Depth: 80 m
Intercept Depth: 8 m

Classification

Deposit Type: other
Program: exploration
Sample Type: drill
Group ID: MGRC005:20-21
Mining Method: underground

Location

Easting: 281365
Northing: 8060448
Elevation: 624 m
Azimuth: 47 °
Dip: -60 °
Loc. Confidence: high
Loc. Source: document

QA/QC

Laboratory: Intertek Minerals Townsville Laboratory and Intertek Genalysis Perth
QA/QC Disclosed: Yes
QP Signed: Yes
QA/QC Methods: standards, blanks, duplicates

Compositing

Cutoff Grade: 0.1
Cutoff Unit: % Sn
Dilution Disclosed: Yes
Max Dilution: 2 m

Review

Needs Review: No
Interp. Status: scored
Historical: No

Dates

Event date: 2026-10-13T00:00:00.000Z

Reasoning: The copper grade of 0.01% over 1m is a trace amount and not economically significant, but is noted as associated mineralization.

Positive factors

Associated mineralization in a new discovery

Negative factors

Trace copper grade
True width not known

Tags used in scoring

QA/QC Disclosedpositive

Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).

Why it applies: qaqc_disclosed is true

Compositing Transparentpositive

Cut-off grade and internal dilution rules are clearly stated for reported intervals.

Why it applies: cutoff_grade and internal dilution are both stated

Nearology Playneutral

Value premise rests on proximity to a known deposit rather than own results.

Why it applies: proximity is offered as the value premise: "21 initial broadly spaced drill holes were completed at the Stannex Prospect, approximately 1km northeast of the Gilmore"

MGRC005Mt Garnet · zincGrade: 0.16Grade Unit: %Intercept: 1 mView all details

Link to this fact

Identity

Hole ID: MGRC005
Project: Mt Garnet
Commodity: zinc
Region: australia_qld
Reported Region: australia_qld
Ticker: KOB

Geometry

Grade: 0.16
Grade Unit: %
Intercept: 1 m
From: 20 m
To: 21 m
Hole Depth: 80 m
Intercept Depth: 8 m

Classification

Deposit Type: other
Program: exploration
Sample Type: drill
Group ID: MGRC005:20-21
Mining Method: underground

Location

Easting: 281365
Northing: 8060448
Elevation: 624 m
Azimuth: 47 °
Dip: -60 °
Loc. Confidence: high
Loc. Source: document

QA/QC

Laboratory: Intertek Minerals Townsville Laboratory and Intertek Genalysis Perth
QA/QC Disclosed: Yes
QP Signed: Yes
QA/QC Methods: standards, blanks, duplicates

Compositing

Cutoff Grade: 0.1
Cutoff Unit: % Sn
Dilution Disclosed: Yes
Max Dilution: 2 m

Review

Needs Review: No
Interp. Status: scored
Historical: No

Dates

Event date: 2026-10-13T00:00:00.000Z

Reasoning: The zinc grade of 0.16% over 1m is a trace amount and not economically significant, but is noted as associated mineralization.

Positive factors

Associated mineralization in a new discovery

Negative factors

Trace zinc grade
True width not known

Tags used in scoring

QA/QC Disclosedpositive

Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).

Why it applies: qaqc_disclosed is true

Compositing Transparentpositive

Cut-off grade and internal dilution rules are clearly stated for reported intervals.

Why it applies: cutoff_grade and internal dilution are both stated

Nearology Playneutral

Value premise rests on proximity to a known deposit rather than own results.

Why it applies: proximity is offered as the value premise: "21 initial broadly spaced drill holes were completed at the Stannex Prospect, approximately 1km northeast of the Gilmore"

MGRC005Mt Garnet · silverGrade: 5Grade Unit: g/tIntercept: 1 mView all details

Link to this fact

Identity

Hole ID: MGRC005
Project: Mt Garnet
Commodity: silver
Region: australia_qld
Reported Region: australia_qld
Ticker: KOB

Geometry

Grade: 5
Grade Unit: g/t
Intercept: 1 m
From: 20 m
To: 21 m
Hole Depth: 80 m
Intercept Depth: 8 m

Classification

Deposit Type: other
Program: exploration
Sample Type: drill
Group ID: MGRC005:20-21
Mining Method: underground

Location

Easting: 281365
Northing: 8060448
Elevation: 624 m
Azimuth: 47 °
Dip: -60 °
Loc. Confidence: high
Loc. Source: document

QA/QC

Laboratory: Intertek Minerals Townsville Laboratory and Intertek Genalysis Perth
QA/QC Disclosed: Yes
QP Signed: Yes
QA/QC Methods: standards, blanks, duplicates

Compositing

Cutoff Grade: 0.1
Cutoff Unit: % Sn
Dilution Disclosed: Yes
Max Dilution: 2 m

Review

Needs Review: No
Interp. Status: scored
Historical: No

Dates

Event date: 2026-10-13T00:00:00.000Z

Reasoning: The silver grade of 5 g/t over 1m is a trace amount and not economically significant, and the high detection limit for silver reduces confidence in the reported value.

Positive factors

Associated mineralization in a new discovery

Negative factors

Trace silver grade
True width not known
High detection limit for silver (10 g/t) reduces confidence in reported values

Tags used in scoring

QA/QC Disclosedpositive

Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).

Why it applies: qaqc_disclosed is true

Compositing Transparentpositive

Cut-off grade and internal dilution rules are clearly stated for reported intervals.

Why it applies: cutoff_grade and internal dilution are both stated

Nearology Playneutral

Value premise rests on proximity to a known deposit rather than own results.

Why it applies: proximity is offered as the value premise: "21 initial broadly spaced drill holes were completed at the Stannex Prospect, approximately 1km northeast of the Gilmore"

MGRC005Mt Garnet · indiumGrade: 3Grade Unit: g/tIntercept: 1 mView all details

Link to this fact

Identity

Hole ID: MGRC005
Project: Mt Garnet
Commodity: indium
Region: australia_qld
Reported Region: australia_qld
Ticker: KOB

Geometry

Grade: 3
Grade Unit: g/t
Intercept: 1 m
From: 20 m
To: 21 m
Hole Depth: 80 m
Intercept Depth: 8 m

Classification

Deposit Type: other
Program: exploration
Sample Type: drill
Group ID: MGRC005:20-21
Mining Method: underground

Location

Easting: 281365
Northing: 8060448
Elevation: 624 m
Azimuth: 47 °
Dip: -60 °
Loc. Confidence: high
Loc. Source: document

QA/QC

Laboratory: Intertek Minerals Townsville Laboratory and Intertek Genalysis Perth
QA/QC Disclosed: Yes
QP Signed: Yes
QA/QC Methods: standards, blanks, duplicates

Compositing

Cutoff Grade: 0.1
Cutoff Unit: % Sn
Dilution Disclosed: Yes
Max Dilution: 2 m

Review

Needs Review: No
Interp. Status: scored
Historical: No

Dates

Event date: 2026-10-13T00:00:00.000Z

Reasoning: The indium grade of 3.0 g/t over 1m is a trace amount and not economically significant, but is noted as associated mineralization.

Positive factors

Associated mineralization in a new discovery

Negative factors

Trace indium grade
True width not known

Tags used in scoring

QA/QC Disclosedpositive

Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).

Why it applies: qaqc_disclosed is true

Compositing Transparentpositive

Cut-off grade and internal dilution rules are clearly stated for reported intervals.

Why it applies: cutoff_grade and internal dilution are both stated

Nearology Playneutral

Value premise rests on proximity to a known deposit rather than own results.

Why it applies: proximity is offered as the value premise: "21 initial broadly spaced drill holes were completed at the Stannex Prospect, approximately 1km northeast of the Gilmore"

MGRC005Mt Garnet · tinGrade: 0.13Grade Unit: %Intercept: 4 mView all details

Link to this fact

Identity

Hole ID: MGRC005
Project: Mt Garnet
Commodity: tin
Region: australia_qld
Reported Region: australia_qld
Ticker: KOB

Geometry

Grade: 0.13
Grade Unit: %
Intercept: 4 m
From: 62 m
To: 66 m
Hole Depth: 80 m
Intercept Depth: 8 m

Classification

Deposit Type: other
Program: exploration
Sample Type: drill
Group ID: MGRC005:62-66
Mining Method: underground

Location

Easting: 281365
Northing: 8060448
Elevation: 624 m
Azimuth: 47 °
Dip: -60 °
Loc. Confidence: high
Loc. Source: document

QA/QC

Laboratory: Intertek Minerals Townsville Laboratory and Intertek Genalysis Perth
QA/QC Disclosed: Yes
QP Signed: Yes
QA/QC Methods: standards, blanks, duplicates

Compositing

Cutoff Grade: 0.1
Cutoff Unit: % Sn
Dilution Disclosed: Yes
Max Dilution: 2 m

Review

Needs Review: No
Interp. Status: scored
Historical: No

Dates

Event date: 2026-10-13T00:00:00.000Z

Reasoning: This intercept of 4m at 0.13% Sn is below the weak grade threshold for tin in an underground context, but contributes to the overall mineralization footprint at Stannex.

Positive factors

Part of a maiden drilling program at Stannex Prospect, indicating new discovery

Negative factors

Grade is below the weak threshold for tin in an underground context
True width not known

Tags used in scoring

QA/QC Disclosedpositive

Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).

Why it applies: qaqc_disclosed is true

Compositing Transparentpositive

Cut-off grade and internal dilution rules are clearly stated for reported intervals.

Why it applies: cutoff_grade and internal dilution are both stated

Nearology Playneutral

Value premise rests on proximity to a known deposit rather than own results.

Why it applies: proximity is offered as the value premise: "21 initial broadly spaced drill holes were completed at the Stannex Prospect, approximately 1km northeast of the Gilmore"

MGRC005Mt Garnet · tungstenGrade: 9Grade Unit: ppmIntercept: 4 mView all details

Link to this fact

Identity

Hole ID: MGRC005
Project: Mt Garnet
Commodity: tungsten
Region: australia_qld
Reported Region: australia_qld
Ticker: KOB

Geometry

Grade: 9
Grade Unit: ppm
Intercept: 4 m
From: 62 m
To: 66 m
Hole Depth: 80 m
Intercept Depth: 8 m

Classification

Deposit Type: other
Program: exploration
Sample Type: drill
Group ID: MGRC005:62-66
Mining Method: underground

Location

Easting: 281365
Northing: 8060448
Elevation: 624 m
Azimuth: 47 °
Dip: -60 °
Loc. Confidence: high
Loc. Source: document

QA/QC

Laboratory: Intertek Minerals Townsville Laboratory and Intertek Genalysis Perth
QA/QC Disclosed: Yes
QP Signed: Yes
QA/QC Methods: standards, blanks, duplicates

Compositing

Cutoff Grade: 0.1
Cutoff Unit: % Sn
Dilution Disclosed: Yes
Max Dilution: 2 m

Review

Needs Review: No
Interp. Status: scored
Historical: No

Dates

Event date: 2026-10-13T00:00:00.000Z

Reasoning: The tungsten grade of 9 ppm over 4m is very low and unlikely to be economic, but is noted as associated mineralization.

Positive factors

Associated mineralization in a new discovery

Negative factors

Very low tungsten grade
True width not known

Tags used in scoring

QA/QC Disclosedpositive

Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).

Why it applies: qaqc_disclosed is true

Compositing Transparentpositive

Cut-off grade and internal dilution rules are clearly stated for reported intervals.

Why it applies: cutoff_grade and internal dilution are both stated

Nearology Playneutral

Value premise rests on proximity to a known deposit rather than own results.

Why it applies: proximity is offered as the value premise: "21 initial broadly spaced drill holes were completed at the Stannex Prospect, approximately 1km northeast of the Gilmore"

MGRC005Mt Garnet · copperGrade: 0Grade Unit: %Intercept: 4 mView all details

Link to this fact

Identity

Hole ID: MGRC005
Project: Mt Garnet
Commodity: copper
Region: australia_qld
Reported Region: australia_qld
Ticker: KOB

Geometry

Grade: 0
Grade Unit: %
Intercept: 4 m
From: 62 m
To: 66 m
Hole Depth: 80 m
Intercept Depth: 8 m

Classification

Deposit Type: other
Program: exploration
Sample Type: drill
Group ID: MGRC005:62-66
Mining Method: underground

Location

Easting: 281365
Northing: 8060448
Elevation: 624 m
Azimuth: 47 °
Dip: -60 °
Loc. Confidence: high
Loc. Source: document

QA/QC

Laboratory: Intertek Minerals Townsville Laboratory and Intertek Genalysis Perth
QA/QC Disclosed: Yes
QP Signed: Yes
QA/QC Methods: standards, blanks, duplicates

Compositing

Cutoff Grade: 0.1
Cutoff Unit: % Sn
Dilution Disclosed: Yes
Max Dilution: 2 m

Review

Needs Review: No
Interp. Status: scored
Historical: No

Dates

Event date: 2026-10-13T00:00:00.000Z

Reasoning: The copper grade of 0.0% over 4m is a trace amount and not economically significant, but is noted as associated mineralization.

Positive factors

Associated mineralization in a new discovery

Negative factors

Trace copper grade
True width not known

Tags used in scoring

QA/QC Disclosedpositive

Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).

Why it applies: qaqc_disclosed is true

Compositing Transparentpositive

Cut-off grade and internal dilution rules are clearly stated for reported intervals.

Why it applies: cutoff_grade and internal dilution are both stated

Nearology Playneutral

Value premise rests on proximity to a known deposit rather than own results.

Why it applies: proximity is offered as the value premise: "21 initial broadly spaced drill holes were completed at the Stannex Prospect, approximately 1km northeast of the Gilmore"

MGRC005Mt Garnet · zincGrade: 0.02Grade Unit: %Intercept: 4 mView all details

Link to this fact

Identity

Hole ID: MGRC005
Project: Mt Garnet
Commodity: zinc
Region: australia_qld
Reported Region: australia_qld
Ticker: KOB

Geometry

Grade: 0.02
Grade Unit: %
Intercept: 4 m
From: 62 m
To: 66 m
Hole Depth: 80 m
Intercept Depth: 8 m

Classification

Deposit Type: other
Program: exploration
Sample Type: drill
Group ID: MGRC005:62-66
Mining Method: underground

Location

Easting: 281365
Northing: 8060448
Elevation: 624 m
Azimuth: 47 °
Dip: -60 °
Loc. Confidence: high
Loc. Source: document

QA/QC

Laboratory: Intertek Minerals Townsville Laboratory and Intertek Genalysis Perth
QA/QC Disclosed: Yes
QP Signed: Yes
QA/QC Methods: standards, blanks, duplicates

Compositing

Cutoff Grade: 0.1
Cutoff Unit: % Sn
Dilution Disclosed: Yes
Max Dilution: 2 m

Review

Needs Review: No
Interp. Status: scored
Historical: No

Dates

Event date: 2026-10-13T00:00:00.000Z

Reasoning: The zinc grade of 0.02% over 4m is a trace amount and not economically significant, but is noted as associated mineralization.

Positive factors

Associated mineralization in a new discovery

Negative factors

Trace zinc grade
True width not known

Tags used in scoring

QA/QC Disclosedpositive

Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).

Why it applies: qaqc_disclosed is true

Compositing Transparentpositive

Cut-off grade and internal dilution rules are clearly stated for reported intervals.

Why it applies: cutoff_grade and internal dilution are both stated

Nearology Playneutral

Value premise rests on proximity to a known deposit rather than own results.

Why it applies: proximity is offered as the value premise: "21 initial broadly spaced drill holes were completed at the Stannex Prospect, approximately 1km northeast of the Gilmore"

MGRC005Mt Garnet · silverGrade: 5Grade Unit: g/tIntercept: 4 mView all details

Link to this fact

Identity

Hole ID: MGRC005
Project: Mt Garnet
Commodity: silver
Region: australia_qld
Reported Region: australia_qld
Ticker: KOB

Geometry

Grade: 5
Grade Unit: g/t
Intercept: 4 m
From: 62 m
To: 66 m
Hole Depth: 80 m
Intercept Depth: 8 m

Classification

Deposit Type: other
Program: exploration
Sample Type: drill
Group ID: MGRC005:62-66
Mining Method: underground

Location

Easting: 281365
Northing: 8060448
Elevation: 624 m
Azimuth: 47 °
Dip: -60 °
Loc. Confidence: high
Loc. Source: document

QA/QC

Laboratory: Intertek Minerals Townsville Laboratory and Intertek Genalysis Perth
QA/QC Disclosed: Yes
QP Signed: Yes
QA/QC Methods: standards, blanks, duplicates

Compositing

Cutoff Grade: 0.1
Cutoff Unit: % Sn
Dilution Disclosed: Yes
Max Dilution: 2 m

Review

Needs Review: No
Interp. Status: scored
Historical: No

Dates

Event date: 2026-10-13T00:00:00.000Z

Reasoning: The silver grade of 5 g/t over 4m is a trace amount and not economically significant, and the high detection limit for silver reduces confidence in the reported value.

Positive factors

Associated mineralization in a new discovery

Negative factors

Trace silver grade
True width not known
High detection limit for silver (10 g/t) reduces confidence in reported values

Tags used in scoring

QA/QC Disclosedpositive

Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).

Why it applies: qaqc_disclosed is true

Compositing Transparentpositive

Cut-off grade and internal dilution rules are clearly stated for reported intervals.

Why it applies: cutoff_grade and internal dilution are both stated

Nearology Playneutral

Value premise rests on proximity to a known deposit rather than own results.

Why it applies: proximity is offered as the value premise: "21 initial broadly spaced drill holes were completed at the Stannex Prospect, approximately 1km northeast of the Gilmore"

MGRC005Mt Garnet · indiumGrade: 1.6Grade Unit: g/tIntercept: 4 mView all details

Link to this fact

Identity

Hole ID: MGRC005
Project: Mt Garnet
Commodity: indium
Region: australia_qld
Reported Region: australia_qld
Ticker: KOB

Geometry

Grade: 1.6
Grade Unit: g/t
Intercept: 4 m
From: 62 m
To: 66 m
Hole Depth: 80 m
Intercept Depth: 8 m

Classification

Deposit Type: other
Program: exploration
Sample Type: drill
Group ID: MGRC005:62-66
Mining Method: underground

Location

Easting: 281365
Northing: 8060448
Elevation: 624 m
Azimuth: 47 °
Dip: -60 °
Loc. Confidence: high
Loc. Source: document

QA/QC

Laboratory: Intertek Minerals Townsville Laboratory and Intertek Genalysis Perth
QA/QC Disclosed: Yes
QP Signed: Yes
QA/QC Methods: standards, blanks, duplicates

Compositing

Cutoff Grade: 0.1
Cutoff Unit: % Sn
Dilution Disclosed: Yes
Max Dilution: 2 m

Review

Needs Review: No
Interp. Status: scored
Historical: No

Dates

Event date: 2026-10-13T00:00:00.000Z

Reasoning: The indium grade of 1.6 g/t over 4m is a trace amount and not economically significant, but is noted as associated mineralization.

Positive factors

Associated mineralization in a new discovery

Negative factors

Trace indium grade
True width not known

Tags used in scoring

QA/QC Disclosedpositive

Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).

Why it applies: qaqc_disclosed is true

Compositing Transparentpositive

Cut-off grade and internal dilution rules are clearly stated for reported intervals.

Why it applies: cutoff_grade and internal dilution are both stated

Nearology Playneutral

Value premise rests on proximity to a known deposit rather than own results.

Why it applies: proximity is offered as the value premise: "21 initial broadly spaced drill holes were completed at the Stannex Prospect, approximately 1km northeast of the Gilmore"

MGRC006Mt Garnet · tinGrade: 0.17Grade Unit: %Intercept: 2 mView all details

Link to this fact

Identity

Hole ID: MGRC006
Project: Mt Garnet
Commodity: tin
Region: australia_qld
Reported Region: australia_qld
Ticker: KOB

Geometry

Grade: 0.17
Grade Unit: %
Intercept: 2 m
From: 56 m
To: 58 m
Hole Depth: 150 m
Intercept Depth: 56 m

Classification

Deposit Type: other
Program: exploration
Sample Type: drill
Group ID: MGRC006:56-58
Mining Method: underground

Location

Easting: 281453
Northing: 8060337
Elevation: 634 m
Azimuth: 46 °
Dip: -57 °
Loc. Confidence: high
Loc. Source: document

QA/QC

Laboratory: Intertek Minerals Townsville Laboratory and Intertek Genalysis Perth
QA/QC Disclosed: Yes
QP Signed: Yes
QA/QC Methods: standards, blanks, duplicates

Compositing

Cutoff Grade: 0.1
Cutoff Unit: % Sn
Dilution Disclosed: Yes
Max Dilution: 2 m

Review

Needs Review: No
Interp. Status: scored
Historical: No

Dates

Event date: 2026-10-13T00:00:00.000Z

Reasoning: This intercept of 2m at 0.17% Sn is below the weak grade threshold for tin in an underground context, but contributes to the overall mineralization footprint at Stannex.

Positive factors

Part of a maiden drilling program at Stannex Prospect, indicating new discovery

Negative factors

Grade is below the weak threshold for tin in an underground context
Narrow width of 2m
True width not known

Tags used in scoring

QA/QC Disclosedpositive

Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).

Why it applies: qaqc_disclosed is true

Compositing Transparentpositive

Cut-off grade and internal dilution rules are clearly stated for reported intervals.

Why it applies: cutoff_grade and internal dilution are both stated

Nearology Playneutral

Value premise rests on proximity to a known deposit rather than own results.

Why it applies: proximity is offered as the value premise: "21 initial broadly spaced drill holes were completed at the Stannex Prospect, approximately 1km northeast of the Gilmore"

MGRC006Mt Garnet · tungstenGrade: 25Grade Unit: ppmIntercept: 2 mView all details

Link to this fact

Identity

Hole ID: MGRC006
Project: Mt Garnet
Commodity: tungsten
Region: australia_qld
Reported Region: australia_qld
Ticker: KOB

Geometry

Grade: 25
Grade Unit: ppm
Intercept: 2 m
From: 56 m
To: 58 m
Hole Depth: 150 m
Intercept Depth: 56 m

Classification

Deposit Type: other
Program: exploration
Sample Type: drill
Group ID: MGRC006:56-58
Mining Method: underground

Location

Easting: 281453
Northing: 8060337
Elevation: 634 m
Azimuth: 46 °
Dip: -57 °
Loc. Confidence: high
Loc. Source: document

QA/QC

Laboratory: Intertek Minerals Townsville Laboratory and Intertek Genalysis Perth
QA/QC Disclosed: Yes
QP Signed: Yes
QA/QC Methods: standards, blanks, duplicates

Compositing

Cutoff Grade: 0.1
Cutoff Unit: % Sn
Dilution Disclosed: Yes
Max Dilution: 2 m

Review

Needs Review: No
Interp. Status: scored
Historical: No

Dates

Event date: 2026-10-13T00:00:00.000Z

Reasoning: The tungsten grade of 25 ppm over 2m is very low and unlikely to be economic, but is noted as associated mineralization.

Positive factors

Associated mineralization in a new discovery

Negative factors

Very low tungsten grade
True width not known

Tags used in scoring

QA/QC Disclosedpositive

Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).

Why it applies: qaqc_disclosed is true

Compositing Transparentpositive

Cut-off grade and internal dilution rules are clearly stated for reported intervals.

Why it applies: cutoff_grade and internal dilution are both stated

Nearology Playneutral

Value premise rests on proximity to a known deposit rather than own results.

Why it applies: proximity is offered as the value premise: "21 initial broadly spaced drill holes were completed at the Stannex Prospect, approximately 1km northeast of the Gilmore"

MGRC006Mt Garnet · copperGrade: 0.12Grade Unit: %Intercept: 2 mView all details

Link to this fact

Identity

Hole ID: MGRC006
Project: Mt Garnet
Commodity: copper
Region: australia_qld
Reported Region: australia_qld
Ticker: KOB

Geometry

Grade: 0.12
Grade Unit: %
Intercept: 2 m
From: 56 m
To: 58 m
Hole Depth: 150 m
Intercept Depth: 56 m

Classification

Deposit Type: other
Program: exploration
Sample Type: drill
Group ID: MGRC006:56-58
Mining Method: underground

Location

Easting: 281453
Northing: 8060337
Elevation: 634 m
Azimuth: 46 °
Dip: -57 °
Loc. Confidence: high
Loc. Source: document

QA/QC

Laboratory: Intertek Minerals Townsville Laboratory and Intertek Genalysis Perth
QA/QC Disclosed: Yes
QP Signed: Yes
QA/QC Methods: standards, blanks, duplicates

Compositing

Cutoff Grade: 0.1
Cutoff Unit: % Sn
Dilution Disclosed: Yes
Max Dilution: 2 m

Review

Needs Review: No
Interp. Status: scored
Historical: No

Dates

Event date: 2026-10-13T00:00:00.000Z

Reasoning: The copper grade of 0.12% over 2m is a trace amount and not economically significant, but is noted as associated mineralization.

Positive factors

Associated mineralization in a new discovery

Negative factors

Trace copper grade
True width not known

Tags used in scoring

QA/QC Disclosedpositive

Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).

Why it applies: qaqc_disclosed is true

Compositing Transparentpositive

Cut-off grade and internal dilution rules are clearly stated for reported intervals.

Why it applies: cutoff_grade and internal dilution are both stated

Nearology Playneutral

Value premise rests on proximity to a known deposit rather than own results.

Why it applies: proximity is offered as the value premise: "21 initial broadly spaced drill holes were completed at the Stannex Prospect, approximately 1km northeast of the Gilmore"

MGRC006Mt Garnet · zincGrade: 0.76Grade Unit: %Intercept: 2 mView all details

Link to this fact

Identity

Hole ID: MGRC006
Project: Mt Garnet
Commodity: zinc
Region: australia_qld
Reported Region: australia_qld
Ticker: KOB

Geometry

Grade: 0.76
Grade Unit: %
Intercept: 2 m
From: 56 m
To: 58 m
Hole Depth: 150 m
Intercept Depth: 56 m

Classification

Deposit Type: other
Program: exploration
Sample Type: drill
Group ID: MGRC006:56-58
Mining Method: underground

Location

Easting: 281453
Northing: 8060337
Elevation: 634 m
Azimuth: 46 °
Dip: -57 °
Loc. Confidence: high
Loc. Source: document

QA/QC

Laboratory: Intertek Minerals Townsville Laboratory and Intertek Genalysis Perth
QA/QC Disclosed: Yes
QP Signed: Yes
QA/QC Methods: standards, blanks, duplicates

Compositing

Cutoff Grade: 0.1
Cutoff Unit: % Sn
Dilution Disclosed: Yes
Max Dilution: 2 m

Review

Needs Review: No
Interp. Status: scored
Historical: No

Dates

Event date: 2026-10-13T00:00:00.000Z

Reasoning: The zinc grade of 0.76% over 2m is a weak grade for an underground target, but represents associated mineralization.

Positive factors

Associated mineralization in a new discovery

Negative factors

Weak zinc grade for an underground target
True width not known

Tags used in scoring

QA/QC Disclosedpositive

Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).

Why it applies: qaqc_disclosed is true

Compositing Transparentpositive

Cut-off grade and internal dilution rules are clearly stated for reported intervals.

Why it applies: cutoff_grade and internal dilution are both stated

Nearology Playneutral

Value premise rests on proximity to a known deposit rather than own results.

Why it applies: proximity is offered as the value premise: "21 initial broadly spaced drill holes were completed at the Stannex Prospect, approximately 1km northeast of the Gilmore"

MGRC006Mt Garnet · silverGrade: 13Grade Unit: g/tIntercept: 2 mView all details

Link to this fact

Identity

Hole ID: MGRC006
Project: Mt Garnet
Commodity: silver
Region: australia_qld
Reported Region: australia_qld
Ticker: KOB

Geometry

Grade: 13
Grade Unit: g/t
Intercept: 2 m
From: 56 m
To: 58 m
Hole Depth: 150 m
Intercept Depth: 56 m

Classification

Deposit Type: other
Program: exploration
Sample Type: drill
Group ID: MGRC006:56-58
Mining Method: underground

Location

Easting: 281453
Northing: 8060337
Elevation: 634 m
Azimuth: 46 °
Dip: -57 °
Loc. Confidence: high
Loc. Source: document

QA/QC

Laboratory: Intertek Minerals Townsville Laboratory and Intertek Genalysis Perth
QA/QC Disclosed: Yes
QP Signed: Yes
QA/QC Methods: standards, blanks, duplicates

Compositing

Cutoff Grade: 0.1
Cutoff Unit: % Sn
Dilution Disclosed: Yes
Max Dilution: 2 m

Review

Needs Review: No
Interp. Status: scored
Historical: No

Dates

Event date: 2026-10-13T00:00:00.000Z

Reasoning: The silver grade of 13 g/t over 2m is low for an underground target, and the high detection limit for silver reduces confidence in the reported value.

Positive factors

Associated mineralization in a new discovery

Negative factors

Low silver grade for an underground target
True width not known
High detection limit for silver (10 g/t) reduces confidence in reported values

Tags used in scoring

QA/QC Disclosedpositive

Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).

Why it applies: qaqc_disclosed is true

Compositing Transparentpositive

Cut-off grade and internal dilution rules are clearly stated for reported intervals.

Why it applies: cutoff_grade and internal dilution are both stated

Nearology Playneutral

Value premise rests on proximity to a known deposit rather than own results.

Why it applies: proximity is offered as the value premise: "21 initial broadly spaced drill holes were completed at the Stannex Prospect, approximately 1km northeast of the Gilmore"

MGRC006Mt Garnet · indiumGrade: 65.8Grade Unit: g/tIntercept: 2 mView all details

Link to this fact

Identity

Hole ID: MGRC006
Project: Mt Garnet
Commodity: indium
Region: australia_qld
Reported Region: australia_qld
Ticker: KOB

Geometry

Grade: 65.8
Grade Unit: g/t
Intercept: 2 m
From: 56 m
To: 58 m
Hole Depth: 150 m
Intercept Depth: 56 m

Classification

Deposit Type: other
Program: exploration
Sample Type: drill
Group ID: MGRC006:56-58
Mining Method: underground

Location

Easting: 281453
Northing: 8060337
Elevation: 634 m
Azimuth: 46 °
Dip: -57 °
Loc. Confidence: high
Loc. Source: document

QA/QC

Laboratory: Intertek Minerals Townsville Laboratory and Intertek Genalysis Perth
QA/QC Disclosed: Yes
QP Signed: Yes
QA/QC Methods: standards, blanks, duplicates

Compositing

Cutoff Grade: 0.1
Cutoff Unit: % Sn
Dilution Disclosed: Yes
Max Dilution: 2 m

Review

Needs Review: No
Interp. Status: scored
Historical: No

Dates

Event date: 2026-10-13T00:00:00.000Z

Reasoning: The indium grade of 65.8 g/t over 2m is a weak grade for an underground target, but represents associated mineralization.

Positive factors

Associated mineralization in a new discovery

Negative factors

Weak indium grade for an underground target
True width not known

Tags used in scoring

QA/QC Disclosedpositive

Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).

Why it applies: qaqc_disclosed is true

Compositing Transparentpositive

Cut-off grade and internal dilution rules are clearly stated for reported intervals.

Why it applies: cutoff_grade and internal dilution are both stated

Nearology Playneutral

Value premise rests on proximity to a known deposit rather than own results.

Why it applies: proximity is offered as the value premise: "21 initial broadly spaced drill holes were completed at the Stannex Prospect, approximately 1km northeast of the Gilmore"

MGRC006Mt Garnet · tinGrade: 0.16Grade Unit: %Intercept: 4 mView all details

Link to this fact

Identity

Hole ID: MGRC006
Project: Mt Garnet
Commodity: tin
Region: australia_qld
Reported Region: australia_qld
Ticker: KOB

Geometry

Grade: 0.16
Grade Unit: %
Intercept: 4 m
From: 96 m
To: 100 m
Hole Depth: 150 m
Intercept Depth: 56 m

Classification

Deposit Type: other
Program: exploration
Sample Type: drill
Group ID: MGRC006:96-100
Mining Method: underground

Location

Easting: 281453
Northing: 8060337
Elevation: 634 m
Azimuth: 46 °
Dip: -57 °
Loc. Confidence: high
Loc. Source: document

QA/QC

Laboratory: Intertek Minerals Townsville Laboratory and Intertek Genalysis Perth
QA/QC Disclosed: Yes
QP Signed: Yes
QA/QC Methods: standards, blanks, duplicates

Compositing

Cutoff Grade: 0.1
Cutoff Unit: % Sn
Dilution Disclosed: Yes
Max Dilution: 2 m

Review

Needs Review: No
Interp. Status: scored
Historical: No

Dates

Event date: 2026-10-13T00:00:00.000Z

Reasoning: This intercept of 4m at 0.16% Sn is below the weak grade threshold for tin in an underground context, but contributes to the overall mineralization footprint at Stannex.

Positive factors

Part of a maiden drilling program at Stannex Prospect, indicating new discovery

Negative factors

Grade is below the weak threshold for tin in an underground context
True width not known

Tags used in scoring

QA/QC Disclosedpositive

Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).

Why it applies: qaqc_disclosed is true

Compositing Transparentpositive

Cut-off grade and internal dilution rules are clearly stated for reported intervals.

Why it applies: cutoff_grade and internal dilution are both stated

Nearology Playneutral

Value premise rests on proximity to a known deposit rather than own results.

Why it applies: proximity is offered as the value premise: "21 initial broadly spaced drill holes were completed at the Stannex Prospect, approximately 1km northeast of the Gilmore"

MGRC006Mt Garnet · tungstenGrade: 8Grade Unit: ppmIntercept: 4 mView all details

Link to this fact

Identity

Hole ID: MGRC006
Project: Mt Garnet
Commodity: tungsten
Region: australia_qld
Reported Region: australia_qld
Ticker: KOB

Geometry

Grade: 8
Grade Unit: ppm
Intercept: 4 m
From: 96 m
To: 100 m
Hole Depth: 150 m
Intercept Depth: 56 m

Classification

Deposit Type: other
Program: exploration
Sample Type: drill
Group ID: MGRC006:96-100
Mining Method: underground

Location

Easting: 281453
Northing: 8060337
Elevation: 634 m
Azimuth: 46 °
Dip: -57 °
Loc. Confidence: high
Loc. Source: document

QA/QC

Laboratory: Intertek Minerals Townsville Laboratory and Intertek Genalysis Perth
QA/QC Disclosed: Yes
QP Signed: Yes
QA/QC Methods: standards, blanks, duplicates

Compositing

Cutoff Grade: 0.1
Cutoff Unit: % Sn
Dilution Disclosed: Yes
Max Dilution: 2 m

Review

Needs Review: No
Interp. Status: scored
Historical: No

Dates

Event date: 2026-10-13T00:00:00.000Z

Reasoning: The tungsten grade of 8 ppm over 4m is very low and unlikely to be economic, but is noted as associated mineralization.

Positive factors

Associated mineralization in a new discovery

Negative factors

Very low tungsten grade
True width not known

Tags used in scoring

QA/QC Disclosedpositive

Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).

Why it applies: qaqc_disclosed is true

Compositing Transparentpositive

Cut-off grade and internal dilution rules are clearly stated for reported intervals.

Why it applies: cutoff_grade and internal dilution are both stated

Nearology Playneutral

Value premise rests on proximity to a known deposit rather than own results.

Why it applies: proximity is offered as the value premise: "21 initial broadly spaced drill holes were completed at the Stannex Prospect, approximately 1km northeast of the Gilmore"

MGRC006Mt Garnet · copperGrade: 0Grade Unit: %Intercept: 4 mView all details

Link to this fact

Identity

Hole ID: MGRC006
Project: Mt Garnet
Commodity: copper
Region: australia_qld
Reported Region: australia_qld
Ticker: KOB

Geometry

Grade: 0
Grade Unit: %
Intercept: 4 m
From: 96 m
To: 100 m
Hole Depth: 150 m
Intercept Depth: 56 m

Classification

Deposit Type: other
Program: exploration
Sample Type: drill
Group ID: MGRC006:96-100
Mining Method: underground

Location

Easting: 281453
Northing: 8060337
Elevation: 634 m
Azimuth: 46 °
Dip: -57 °
Loc. Confidence: high
Loc. Source: document

QA/QC

Laboratory: Intertek Minerals Townsville Laboratory and Intertek Genalysis Perth
QA/QC Disclosed: Yes
QP Signed: Yes
QA/QC Methods: standards, blanks, duplicates

Compositing

Cutoff Grade: 0.1
Cutoff Unit: % Sn
Dilution Disclosed: Yes
Max Dilution: 2 m

Review

Needs Review: No
Interp. Status: scored
Historical: No

Dates

Event date: 2026-10-13T00:00:00.000Z

Reasoning: The copper grade of 0.0% over 4m is a trace amount and not economically significant, but is noted as associated mineralization.

Positive factors

Associated mineralization in a new discovery

Negative factors

Trace copper grade
True width not known

Tags used in scoring

QA/QC Disclosedpositive

Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).

Why it applies: qaqc_disclosed is true

Compositing Transparentpositive

Cut-off grade and internal dilution rules are clearly stated for reported intervals.

Why it applies: cutoff_grade and internal dilution are both stated

Nearology Playneutral

Value premise rests on proximity to a known deposit rather than own results.

Why it applies: proximity is offered as the value premise: "21 initial broadly spaced drill holes were completed at the Stannex Prospect, approximately 1km northeast of the Gilmore"

MGRC006Mt Garnet · zincGrade: 0.04Grade Unit: %Intercept: 4 mView all details

Link to this fact

Identity

Hole ID: MGRC006
Project: Mt Garnet
Commodity: zinc
Region: australia_qld
Reported Region: australia_qld
Ticker: KOB

Geometry

Grade: 0.04
Grade Unit: %
Intercept: 4 m
From: 96 m
To: 100 m
Hole Depth: 150 m
Intercept Depth: 56 m

Classification

Deposit Type: other
Program: exploration
Sample Type: drill
Group ID: MGRC006:96-100
Mining Method: underground

Location

Easting: 281453
Northing: 8060337
Elevation: 634 m
Azimuth: 46 °
Dip: -57 °
Loc. Confidence: high
Loc. Source: document

QA/QC

Laboratory: Intertek Minerals Townsville Laboratory and Intertek Genalysis Perth
QA/QC Disclosed: Yes
QP Signed: Yes
QA/QC Methods: standards, blanks, duplicates

Compositing

Cutoff Grade: 0.1
Cutoff Unit: % Sn
Dilution Disclosed: Yes
Max Dilution: 2 m

Review

Needs Review: No
Interp. Status: scored
Historical: No

Dates

Event date: 2026-10-13T00:00:00.000Z

Reasoning: The zinc grade of 0.04% over 4m is a trace amount and not economically significant, but is noted as associated mineralization.

Positive factors

Associated mineralization in a new discovery

Negative factors

Trace zinc grade
True width not known

Tags used in scoring

QA/QC Disclosedpositive

Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).

Why it applies: qaqc_disclosed is true

Compositing Transparentpositive

Cut-off grade and internal dilution rules are clearly stated for reported intervals.

Why it applies: cutoff_grade and internal dilution are both stated

Nearology Playneutral

Value premise rests on proximity to a known deposit rather than own results.

Why it applies: proximity is offered as the value premise: "21 initial broadly spaced drill holes were completed at the Stannex Prospect, approximately 1km northeast of the Gilmore"

MGRC006Mt Garnet · silverGrade: 5Grade Unit: g/tIntercept: 4 mView all details

Link to this fact

Identity

Hole ID: MGRC006
Project: Mt Garnet
Commodity: silver
Region: australia_qld
Reported Region: australia_qld
Ticker: KOB

Geometry

Grade: 5
Grade Unit: g/t
Intercept: 4 m
From: 96 m
To: 100 m
Hole Depth: 150 m
Intercept Depth: 56 m

Classification

Deposit Type: other
Program: exploration
Sample Type: drill
Group ID: MGRC006:96-100
Mining Method: underground

Location

Easting: 281453
Northing: 8060337
Elevation: 634 m
Azimuth: 46 °
Dip: -57 °
Loc. Confidence: high
Loc. Source: document

QA/QC

Laboratory: Intertek Minerals Townsville Laboratory and Intertek Genalysis Perth
QA/QC Disclosed: Yes
QP Signed: Yes
QA/QC Methods: standards, blanks, duplicates

Compositing

Cutoff Grade: 0.1
Cutoff Unit: % Sn
Dilution Disclosed: Yes
Max Dilution: 2 m

Review

Needs Review: No
Interp. Status: scored
Historical: No

Dates

Event date: 2026-10-13T00:00:00.000Z

Reasoning: The silver grade of 5 g/t over 4m is a trace amount and not economically significant, and the high detection limit for silver reduces confidence in the reported value.

Positive factors

Associated mineralization in a new discovery

Negative factors

Trace silver grade
True width not known
High detection limit for silver (10 g/t) reduces confidence in reported values

Tags used in scoring

QA/QC Disclosedpositive

Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).

Why it applies: qaqc_disclosed is true

Compositing Transparentpositive

Cut-off grade and internal dilution rules are clearly stated for reported intervals.

Why it applies: cutoff_grade and internal dilution are both stated

Nearology Playneutral

Value premise rests on proximity to a known deposit rather than own results.

Why it applies: proximity is offered as the value premise: "21 initial broadly spaced drill holes were completed at the Stannex Prospect, approximately 1km northeast of the Gilmore"

MGRC006Mt Garnet · indiumGrade: 2.4Grade Unit: g/tIntercept: 4 mView all details

Link to this fact

Identity

Hole ID: MGRC006
Project: Mt Garnet
Commodity: indium
Region: australia_qld
Reported Region: australia_qld
Ticker: KOB

Geometry

Grade: 2.4
Grade Unit: g/t
Intercept: 4 m
From: 96 m
To: 100 m
Hole Depth: 150 m
Intercept Depth: 56 m

Classification

Deposit Type: other
Program: exploration
Sample Type: drill
Group ID: MGRC006:96-100
Mining Method: underground

Location

Easting: 281453
Northing: 8060337
Elevation: 634 m
Azimuth: 46 °
Dip: -57 °
Loc. Confidence: high
Loc. Source: document

QA/QC

Laboratory: Intertek Minerals Townsville Laboratory and Intertek Genalysis Perth
QA/QC Disclosed: Yes
QP Signed: Yes
QA/QC Methods: standards, blanks, duplicates

Compositing

Cutoff Grade: 0.1
Cutoff Unit: % Sn
Dilution Disclosed: Yes
Max Dilution: 2 m

Review

Needs Review: No
Interp. Status: scored
Historical: No

Dates

Event date: 2026-10-13T00:00:00.000Z

Reasoning: The indium grade of 2.4 g/t over 4m is a trace amount and not economically significant, but is noted as associated mineralization.

Positive factors

Associated mineralization in a new discovery

Negative factors

Trace indium grade
True width not known

Tags used in scoring

QA/QC Disclosedpositive

Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).

Why it applies: qaqc_disclosed is true

Compositing Transparentpositive

Cut-off grade and internal dilution rules are clearly stated for reported intervals.

Why it applies: cutoff_grade and internal dilution are both stated

Nearology Playneutral

Value premise rests on proximity to a known deposit rather than own results.

Why it applies: proximity is offered as the value premise: "21 initial broadly spaced drill holes were completed at the Stannex Prospect, approximately 1km northeast of the Gilmore"

MGRC011Mt Garnet · tinGrade: 4.07Grade Unit: %Intercept: 1 mView all details

Link to this fact

Identity

Hole ID: MGRC011
Project: Mt Garnet
Commodity: tin
Region: australia_qld
Reported Region: australia_qld
Ticker: KOB

Geometry

Grade: 4.07
Grade Unit: %
Intercept: 1 m
From: 117 m
To: 118 m
Hole Depth: 162 m
Intercept Depth: 111 m

Classification

Deposit Type: other
Program: exploration
Sample Type: drill
Group ID: MGRC011:117-118
Mining Method: underground

Location

Easting: 279795
Northing: 8059962
Elevation: 642 m
Azimuth: 44 °
Dip: -70 °
Loc. Confidence: high
Loc. Source: document

QA/QC

Laboratory: Intertek Minerals Townsville Laboratory and Intertek Genalysis Perth
QA/QC Disclosed: Yes
QP Signed: Yes
QA/QC Methods: standards, blanks, duplicates

Compositing

Cutoff Grade: 0.4
Cutoff Unit: % Sn
Dilution Disclosed: Yes
Max Dilution: 2 m

Review

Needs Review: No
Interp. Status: scored
Historical: No

Dates

Event date: 2026-10-13T00:00:00.000Z

Reasoning: This intercept of 1m at 4.07% Sn is a bonanza-grade result, demonstrating very high-grade tin mineralization comparable to historical production, and significantly exceeding prior best results for the project.

Positive factors

Bonanza grade for tin in an underground context
Significantly higher than the project's prior best grade of 5.2% Sn
Close to historical production grades of 7.6% Sn

Negative factors

Narrow width of 1m
True width not known

Tags used in scoring

QA/QC Disclosedpositive

Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).

Why it applies: qaqc_disclosed is true

Compositing Transparentpositive

Cut-off grade and internal dilution rules are clearly stated for reported intervals.

Why it applies: cutoff_grade and internal dilution are both stated

Nearology Playneutral

Value premise rests on proximity to a known deposit rather than own results.

Why it applies: proximity is offered as the value premise: "21 initial broadly spaced drill holes were completed at the Stannex Prospect, approximately 1km northeast of the Gilmore"

MGRC011Mt Garnet · tungstenGrade: 692Grade Unit: ppmIntercept: 1 mView all details

Link to this fact

Identity

Hole ID: MGRC011
Project: Mt Garnet
Commodity: tungsten
Region: australia_qld
Reported Region: australia_qld
Ticker: KOB

Geometry

Grade: 692
Grade Unit: ppm
Intercept: 1 m
From: 117 m
To: 118 m
Hole Depth: 162 m
Intercept Depth: 111 m

Classification

Deposit Type: other
Program: exploration
Sample Type: drill
Group ID: MGRC011:117-118
Mining Method: underground

Location

Easting: 279795
Northing: 8059962
Elevation: 642 m
Azimuth: 44 °
Dip: -70 °
Loc. Confidence: high
Loc. Source: document

QA/QC

Laboratory: Intertek Minerals Townsville Laboratory and Intertek Genalysis Perth
QA/QC Disclosed: Yes
QP Signed: Yes
QA/QC Methods: standards, blanks, duplicates

Compositing

Cutoff Grade: 0.4
Cutoff Unit: % Sn
Dilution Disclosed: Yes
Max Dilution: 2 m

Review

Needs Review: No
Interp. Status: scored
Historical: No

Dates

Event date: 2026-10-13T00:00:00.000Z

Reasoning: The tungsten grade of 692 ppm over 1m is very low and unlikely to be economic, but is noted as associated mineralization.

Positive factors

Associated mineralization in a new discovery

Negative factors

Very low tungsten grade
True width not known

Tags used in scoring

QA/QC Disclosedpositive

Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).

Why it applies: qaqc_disclosed is true

Compositing Transparentpositive

Cut-off grade and internal dilution rules are clearly stated for reported intervals.

Why it applies: cutoff_grade and internal dilution are both stated

Nearology Playneutral

Value premise rests on proximity to a known deposit rather than own results.

Why it applies: proximity is offered as the value premise: "21 initial broadly spaced drill holes were completed at the Stannex Prospect, approximately 1km northeast of the Gilmore"

MGRC011Mt Garnet · copperGrade: 0.78Grade Unit: %Intercept: 1 mView all details

Link to this fact

Identity

Hole ID: MGRC011
Project: Mt Garnet
Commodity: copper
Region: australia_qld
Reported Region: australia_qld
Ticker: KOB

Geometry

Grade: 0.78
Grade Unit: %
Intercept: 1 m
From: 117 m
To: 118 m
Hole Depth: 162 m
Intercept Depth: 111 m

Classification

Deposit Type: other
Program: exploration
Sample Type: drill
Group ID: MGRC011:117-118
Mining Method: underground

Location

Easting: 279795
Northing: 8059962
Elevation: 642 m
Azimuth: 44 °
Dip: -70 °
Loc. Confidence: high
Loc. Source: document

QA/QC

Laboratory: Intertek Minerals Townsville Laboratory and Intertek Genalysis Perth
QA/QC Disclosed: Yes
QP Signed: Yes
QA/QC Methods: standards, blanks, duplicates

Compositing

Cutoff Grade: 0.4
Cutoff Unit: % Sn
Dilution Disclosed: Yes
Max Dilution: 2 m

Review

Needs Review: No
Interp. Status: scored
Historical: No

Dates

Event date: 2026-10-13T00:00:00.000Z

Reasoning: The copper grade of 0.78% over 1m is a weak grade for an underground target, but represents associated mineralization within a bonanza-grade tin zone.

Positive factors

Associated mineralization in a new discovery

Negative factors

Weak copper grade for an underground target
True width not known

Tags used in scoring

QA/QC Disclosedpositive

Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).

Why it applies: qaqc_disclosed is true

Compositing Transparentpositive

Cut-off grade and internal dilution rules are clearly stated for reported intervals.

Why it applies: cutoff_grade and internal dilution are both stated

Nearology Playneutral

Value premise rests on proximity to a known deposit rather than own results.

Why it applies: proximity is offered as the value premise: "21 initial broadly spaced drill holes were completed at the Stannex Prospect, approximately 1km northeast of the Gilmore"

MGRC011Mt Garnet · zincGrade: 0.56Grade Unit: %Intercept: 1 mView all details

Link to this fact

Identity

Hole ID: MGRC011
Project: Mt Garnet
Commodity: zinc
Region: australia_qld
Reported Region: australia_qld
Ticker: KOB

Geometry

Grade: 0.56
Grade Unit: %
Intercept: 1 m
From: 117 m
To: 118 m
Hole Depth: 162 m
Intercept Depth: 111 m

Classification

Deposit Type: other
Program: exploration
Sample Type: drill
Group ID: MGRC011:117-118
Mining Method: underground

Location

Easting: 279795
Northing: 8059962
Elevation: 642 m
Azimuth: 44 °
Dip: -70 °
Loc. Confidence: high
Loc. Source: document

QA/QC

Laboratory: Intertek Minerals Townsville Laboratory and Intertek Genalysis Perth
QA/QC Disclosed: Yes
QP Signed: Yes
QA/QC Methods: standards, blanks, duplicates

Compositing

Cutoff Grade: 0.4
Cutoff Unit: % Sn
Dilution Disclosed: Yes
Max Dilution: 2 m

Review

Needs Review: No
Interp. Status: scored
Historical: No

Dates

Event date: 2026-10-13T00:00:00.000Z

Reasoning: The zinc grade of 0.56% over 1m is a weak grade for an underground target, but represents associated mineralization within a bonanza-grade tin zone.

Positive factors

Associated mineralization in a new discovery

Negative factors

Weak zinc grade for an underground target
True width not known

Tags used in scoring

QA/QC Disclosedpositive

Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).

Why it applies: qaqc_disclosed is true

Compositing Transparentpositive

Cut-off grade and internal dilution rules are clearly stated for reported intervals.

Why it applies: cutoff_grade and internal dilution are both stated

Nearology Playneutral

Value premise rests on proximity to a known deposit rather than own results.

Why it applies: proximity is offered as the value premise: "21 initial broadly spaced drill holes were completed at the Stannex Prospect, approximately 1km northeast of the Gilmore"

MGRC011Mt Garnet · silverGrade: 94Grade Unit: g/tIntercept: 1 mView all details

Link to this fact

Identity

Hole ID: MGRC011
Project: Mt Garnet
Commodity: silver
Region: australia_qld
Reported Region: australia_qld
Ticker: KOB

Geometry

Grade: 94
Grade Unit: g/t
Intercept: 1 m
From: 117 m
To: 118 m
Hole Depth: 162 m
Intercept Depth: 111 m

Classification

Deposit Type: other
Program: exploration
Sample Type: drill
Group ID: MGRC011:117-118
Mining Method: underground

Location

Easting: 279795
Northing: 8059962
Elevation: 642 m
Azimuth: 44 °
Dip: -70 °
Loc. Confidence: high
Loc. Source: document

QA/QC

Laboratory: Intertek Minerals Townsville Laboratory and Intertek Genalysis Perth
QA/QC Disclosed: Yes
QP Signed: Yes
QA/QC Methods: standards, blanks, duplicates

Compositing

Cutoff Grade: 0.4
Cutoff Unit: % Sn
Dilution Disclosed: Yes
Max Dilution: 2 m

Review

Needs Review: No
Interp. Status: scored
Historical: No

Dates

Event date: 2026-10-13T00:00:00.000Z

Reasoning: The silver grade of 94 g/t over 1m is a moderate grade for an underground target, representing associated mineralization within a bonanza-grade tin zone, though confidence is reduced by the high detection limit.

Positive factors

Moderate silver grade for an underground target
Associated mineralization in a new discovery

Negative factors

True width not known
High detection limit for silver (10 g/t) reduces confidence in reported values

Tags used in scoring

QA/QC Disclosedpositive

Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).

Why it applies: qaqc_disclosed is true

Compositing Transparentpositive

Cut-off grade and internal dilution rules are clearly stated for reported intervals.

Why it applies: cutoff_grade and internal dilution are both stated

Nearology Playneutral

Value premise rests on proximity to a known deposit rather than own results.

Why it applies: proximity is offered as the value premise: "21 initial broadly spaced drill holes were completed at the Stannex Prospect, approximately 1km northeast of the Gilmore"

MGRC011Mt Garnet · indiumGrade: 31.1Grade Unit: g/tIntercept: 1 mView all details

Link to this fact

Identity

Hole ID: MGRC011
Project: Mt Garnet
Commodity: indium
Region: australia_qld
Reported Region: australia_qld
Ticker: KOB

Geometry

Grade: 31.1
Grade Unit: g/t
Intercept: 1 m
From: 117 m
To: 118 m
Hole Depth: 162 m
Intercept Depth: 111 m

Classification

Deposit Type: other
Program: exploration
Sample Type: drill
Group ID: MGRC011:117-118
Mining Method: underground

Location

Easting: 279795
Northing: 8059962
Elevation: 642 m
Azimuth: 44 °
Dip: -70 °
Loc. Confidence: high
Loc. Source: document

QA/QC

Laboratory: Intertek Minerals Townsville Laboratory and Intertek Genalysis Perth
QA/QC Disclosed: Yes
QP Signed: Yes
QA/QC Methods: standards, blanks, duplicates

Compositing

Cutoff Grade: 0.4
Cutoff Unit: % Sn
Dilution Disclosed: Yes
Max Dilution: 2 m

Review

Needs Review: No
Interp. Status: scored
Historical: No

Dates

Event date: 2026-10-13T00:00:00.000Z

Reasoning: The indium grade of 31.1 g/t over 1m is a weak grade for an underground target, but represents associated mineralization within a bonanza-grade tin zone.

Positive factors

Associated mineralization in a new discovery

Negative factors

Weak indium grade for an underground target
True width not known

Tags used in scoring

QA/QC Disclosedpositive

Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).

Why it applies: qaqc_disclosed is true

Compositing Transparentpositive

Cut-off grade and internal dilution rules are clearly stated for reported intervals.

Why it applies: cutoff_grade and internal dilution are both stated

Nearology Playneutral

Value premise rests on proximity to a known deposit rather than own results.

Why it applies: proximity is offered as the value premise: "21 initial broadly spaced drill holes were completed at the Stannex Prospect, approximately 1km northeast of the Gilmore"

MGRC011Mt Garnet · tinGrade: 8.75Grade Unit: %Intercept: 1 mView all details

Link to this fact

Identity

Hole ID: MGRC011
Project: Mt Garnet
Commodity: tin
Region: australia_qld
Reported Region: australia_qld
Ticker: KOB

Geometry

Grade: 8.75
Grade Unit: %
Intercept: 1 m
From: 126 m
To: 127 m
Hole Depth: 162 m
Intercept Depth: 111 m

Classification

Deposit Type: other
Program: exploration
Sample Type: drill
Group ID: MGRC011:126-127
Mining Method: underground

Location

Easting: 279795
Northing: 8059962
Elevation: 642 m
Azimuth: 44 °
Dip: -70 °
Loc. Confidence: high
Loc. Source: document

QA/QC

Laboratory: Intertek Minerals Townsville Laboratory and Intertek Genalysis Perth
QA/QC Disclosed: Yes
QP Signed: Yes
QA/QC Methods: standards, blanks, duplicates

Compositing

Cutoff Grade: 5
Cutoff Unit: % Sn
Dilution Disclosed: Yes
Max Dilution: 2 m

Review

Needs Review: No
Interp. Status: scored
Historical: No

Dates

Event date: 2026-10-13T00:00:00.000Z

Reasoning: This intercept of 1m at 8.75% Sn is an exceptional bonanza-grade result, exceeding historical production grades and significantly higher than prior best results for the project, indicating very high-grade tin mineralization.

Positive factors

Bonanza grade for tin in an underground context
Significantly higher than the project's prior best grade of 5.2% Sn
Exceeds historical production grades of 7.6% Sn

Negative factors

Narrow width of 1m
True width not known

Tags used in scoring

QA/QC Disclosedpositive

Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).

Why it applies: qaqc_disclosed is true

Compositing Transparentpositive

Cut-off grade and internal dilution rules are clearly stated for reported intervals.

Why it applies: cutoff_grade and internal dilution are both stated

Nearology Playneutral

Value premise rests on proximity to a known deposit rather than own results.

Why it applies: proximity is offered as the value premise: "21 initial broadly spaced drill holes were completed at the Stannex Prospect, approximately 1km northeast of the Gilmore"

MGRC011Mt Garnet · tungstenGrade: 204Grade Unit: ppmIntercept: 1 mView all details

Link to this fact

Identity

Hole ID: MGRC011
Project: Mt Garnet
Commodity: tungsten
Region: australia_qld
Reported Region: australia_qld
Ticker: KOB

Geometry

Grade: 204
Grade Unit: ppm
Intercept: 1 m
From: 126 m
To: 127 m
Hole Depth: 162 m
Intercept Depth: 111 m

Classification

Deposit Type: other
Program: exploration
Sample Type: drill
Group ID: MGRC011:126-127
Mining Method: underground

Location

Easting: 279795
Northing: 8059962
Elevation: 642 m
Azimuth: 44 °
Dip: -70 °
Loc. Confidence: high
Loc. Source: document

QA/QC

Laboratory: Intertek Minerals Townsville Laboratory and Intertek Genalysis Perth
QA/QC Disclosed: Yes
QP Signed: Yes
QA/QC Methods: standards, blanks, duplicates

Compositing

Cutoff Grade: 5
Cutoff Unit: % Sn
Dilution Disclosed: Yes
Max Dilution: 2 m

Review

Needs Review: No
Interp. Status: scored
Historical: No

Dates

Event date: 2026-10-13T00:00:00.000Z

Reasoning: The tungsten grade of 204 ppm over 1m is very low and unlikely to be economic, but is noted as associated mineralization.

Positive factors

Associated mineralization in a new discovery

Negative factors

Very low tungsten grade
True width not known

Tags used in scoring

QA/QC Disclosedpositive

Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).

Why it applies: qaqc_disclosed is true

Compositing Transparentpositive

Cut-off grade and internal dilution rules are clearly stated for reported intervals.

Why it applies: cutoff_grade and internal dilution are both stated

Nearology Playneutral

Value premise rests on proximity to a known deposit rather than own results.

Why it applies: proximity is offered as the value premise: "21 initial broadly spaced drill holes were completed at the Stannex Prospect, approximately 1km northeast of the Gilmore"

MGRC011Mt Garnet · copperGrade: 0.53Grade Unit: %Intercept: 1 mView all details

Link to this fact

Identity

Hole ID: MGRC011
Project: Mt Garnet
Commodity: copper
Region: australia_qld
Reported Region: australia_qld
Ticker: KOB

Geometry

Grade: 0.53
Grade Unit: %
Intercept: 1 m
From: 126 m
To: 127 m
Hole Depth: 162 m
Intercept Depth: 111 m

Classification

Deposit Type: other
Program: exploration
Sample Type: drill
Group ID: MGRC011:126-127
Mining Method: underground

Location

Easting: 279795
Northing: 8059962
Elevation: 642 m
Azimuth: 44 °
Dip: -70 °
Loc. Confidence: high
Loc. Source: document

QA/QC

Laboratory: Intertek Minerals Townsville Laboratory and Intertek Genalysis Perth
QA/QC Disclosed: Yes
QP Signed: Yes
QA/QC Methods: standards, blanks, duplicates

Compositing

Cutoff Grade: 5
Cutoff Unit: % Sn
Dilution Disclosed: Yes
Max Dilution: 2 m

Review

Needs Review: No
Interp. Status: scored
Historical: No

Dates

Event date: 2026-10-13T00:00:00.000Z

Reasoning: The copper grade of 0.53% over 1m is a weak grade for an underground target, but represents associated mineralization within a bonanza-grade tin zone.

Positive factors

Associated mineralization in a new discovery

Negative factors

Weak copper grade for an underground target
True width not known

Tags used in scoring

QA/QC Disclosedpositive

Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).

Why it applies: qaqc_disclosed is true

Compositing Transparentpositive

Cut-off grade and internal dilution rules are clearly stated for reported intervals.

Why it applies: cutoff_grade and internal dilution are both stated

Nearology Playneutral

Value premise rests on proximity to a known deposit rather than own results.

Why it applies: proximity is offered as the value premise: "21 initial broadly spaced drill holes were completed at the Stannex Prospect, approximately 1km northeast of the Gilmore"

MGRC011Mt Garnet · zincGrade: 0.27Grade Unit: %Intercept: 1 mView all details

Link to this fact

Identity

Hole ID: MGRC011
Project: Mt Garnet
Commodity: zinc
Region: australia_qld
Reported Region: australia_qld
Ticker: KOB

Geometry

Grade: 0.27
Grade Unit: %
Intercept: 1 m
From: 126 m
To: 127 m
Hole Depth: 162 m
Intercept Depth: 111 m

Classification

Deposit Type: other
Program: exploration
Sample Type: drill
Group ID: MGRC011:126-127
Mining Method: underground

Location

Easting: 279795
Northing: 8059962
Elevation: 642 m
Azimuth: 44 °
Dip: -70 °
Loc. Confidence: high
Loc. Source: document

QA/QC

Laboratory: Intertek Minerals Townsville Laboratory and Intertek Genalysis Perth
QA/QC Disclosed: Yes
QP Signed: Yes
QA/QC Methods: standards, blanks, duplicates

Compositing

Cutoff Grade: 5
Cutoff Unit: % Sn
Dilution Disclosed: Yes
Max Dilution: 2 m

Review

Needs Review: No
Interp. Status: scored
Historical: No

Dates

Event date: 2026-10-13T00:00:00.000Z

Reasoning: The zinc grade of 0.27% over 1m is a trace amount and not economically significant, but is noted as associated mineralization.

Positive factors

Associated mineralization in a new discovery

Negative factors

Trace zinc grade
True width not known

Tags used in scoring

QA/QC Disclosedpositive

Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).

Why it applies: qaqc_disclosed is true

Compositing Transparentpositive

Cut-off grade and internal dilution rules are clearly stated for reported intervals.

Why it applies: cutoff_grade and internal dilution are both stated

Nearology Playneutral

Value premise rests on proximity to a known deposit rather than own results.

Why it applies: proximity is offered as the value premise: "21 initial broadly spaced drill holes were completed at the Stannex Prospect, approximately 1km northeast of the Gilmore"

MGRC011Mt Garnet · silverGrade: 34Grade Unit: g/tIntercept: 1 mView all details

Link to this fact

Identity

Hole ID: MGRC011
Project: Mt Garnet
Commodity: silver
Region: australia_qld
Reported Region: australia_qld
Ticker: KOB

Geometry

Grade: 34
Grade Unit: g/t
Intercept: 1 m
From: 126 m
To: 127 m
Hole Depth: 162 m
Intercept Depth: 111 m

Classification

Deposit Type: other
Program: exploration
Sample Type: drill
Group ID: MGRC011:126-127
Mining Method: underground

Location

Easting: 279795
Northing: 8059962
Elevation: 642 m
Azimuth: 44 °
Dip: -70 °
Loc. Confidence: high
Loc. Source: document

QA/QC

Laboratory: Intertek Minerals Townsville Laboratory and Intertek Genalysis Perth
QA/QC Disclosed: Yes
QP Signed: Yes
QA/QC Methods: standards, blanks, duplicates

Compositing

Cutoff Grade: 5
Cutoff Unit: % Sn
Dilution Disclosed: Yes
Max Dilution: 2 m

Review

Needs Review: No
Interp. Status: scored
Historical: No

Dates

Event date: 2026-10-13T00:00:00.000Z

Reasoning: The silver grade of 34 g/t over 1m is low for an underground target, and the high detection limit for silver reduces confidence in the reported value.

Positive factors

Associated mineralization in a new discovery

Negative factors

Low silver grade for an underground target
True width not known
High detection limit for silver (10 g/t) reduces confidence in reported values

Tags used in scoring

QA/QC Disclosedpositive

Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).

Why it applies: qaqc_disclosed is true

Compositing Transparentpositive

Cut-off grade and internal dilution rules are clearly stated for reported intervals.

Why it applies: cutoff_grade and internal dilution are both stated

Nearology Playneutral

Value premise rests on proximity to a known deposit rather than own results.

Why it applies: proximity is offered as the value premise: "21 initial broadly spaced drill holes were completed at the Stannex Prospect, approximately 1km northeast of the Gilmore"

MGRC011Mt Garnet · indiumGrade: 13Grade Unit: g/tIntercept: 1 mView all details

Link to this fact

Identity

Hole ID: MGRC011
Project: Mt Garnet
Commodity: indium
Region: australia_qld
Reported Region: australia_qld
Ticker: KOB

Geometry

Grade: 13
Grade Unit: g/t
Intercept: 1 m
From: 126 m
To: 127 m
Hole Depth: 162 m
Intercept Depth: 111 m

Classification

Deposit Type: other
Program: exploration
Sample Type: drill
Group ID: MGRC011:126-127
Mining Method: underground

Location

Easting: 279795
Northing: 8059962
Elevation: 642 m
Azimuth: 44 °
Dip: -70 °
Loc. Confidence: high
Loc. Source: document

QA/QC

Laboratory: Intertek Minerals Townsville Laboratory and Intertek Genalysis Perth
QA/QC Disclosed: Yes
QP Signed: Yes
QA/QC Methods: standards, blanks, duplicates

Compositing

Cutoff Grade: 5
Cutoff Unit: % Sn
Dilution Disclosed: Yes
Max Dilution: 2 m

Review

Needs Review: No
Interp. Status: scored
Historical: No

Dates

Event date: 2026-10-13T00:00:00.000Z

Reasoning: The indium grade of 13.0 g/t over 1m is a trace amount and not economically significant, but is noted as associated mineralization.

Positive factors

Associated mineralization in a new discovery

Negative factors

Trace indium grade
True width not known

Tags used in scoring

QA/QC Disclosedpositive

Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).

Why it applies: qaqc_disclosed is true

Compositing Transparentpositive

Cut-off grade and internal dilution rules are clearly stated for reported intervals.

Why it applies: cutoff_grade and internal dilution are both stated

Nearology Playneutral

Value premise rests on proximity to a known deposit rather than own results.

Why it applies: proximity is offered as the value premise: "21 initial broadly spaced drill holes were completed at the Stannex Prospect, approximately 1km northeast of the Gilmore"

MGRC011Mt Garnet · tinGrade: 3Grade Unit: %Intercept: 2 mView all details

Link to this fact

Identity

Hole ID: MGRC011
Project: Mt Garnet
Commodity: tin
Region: australia_qld
Reported Region: australia_qld
Ticker: KOB

Geometry

Grade: 3
Grade Unit: %
Intercept: 2 m
From: 130 m
To: 132 m
Hole Depth: 162 m
Intercept Depth: 111 m

Classification

Deposit Type: other
Program: exploration
Sample Type: drill
Group ID: MGRC011:130-132
Mining Method: underground

Location

Easting: 279795
Northing: 8059962
Elevation: 642 m
Azimuth: 44 °
Dip: -70 °
Loc. Confidence: high
Loc. Source: document

QA/QC

Laboratory: Intertek Minerals Townsville Laboratory and Intertek Genalysis Perth
QA/QC Disclosed: Yes
QP Signed: Yes
QA/QC Methods: standards, blanks, duplicates

Compositing

Cutoff Grade: 2
Cutoff Unit: % Sn
Dilution Disclosed: Yes
Max Dilution: 2 m

Review

Needs Review: No
Interp. Status: scored
Historical: No

Dates

Event date: 2026-10-13T00:00:00.000Z

Reasoning: This intercept of 2m at 3.00% Sn is an exceptional-grade result, demonstrating very high-grade tin mineralization significantly exceeding prior best results for the project.

Positive factors

Exceptional grade for tin in an underground context
Significantly higher than the project's prior best grade of 5.2% Sn

Negative factors

Narrow width of 2m
True width not known

Tags used in scoring

QA/QC Disclosedpositive

Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).

Why it applies: qaqc_disclosed is true

Compositing Transparentpositive

Cut-off grade and internal dilution rules are clearly stated for reported intervals.

Why it applies: cutoff_grade and internal dilution are both stated

Nearology Playneutral

Value premise rests on proximity to a known deposit rather than own results.

Why it applies: proximity is offered as the value premise: "21 initial broadly spaced drill holes were completed at the Stannex Prospect, approximately 1km northeast of the Gilmore"

MGRC011Mt Garnet · tungstenGrade: 571Grade Unit: ppmIntercept: 2 mView all details

Link to this fact

Identity

Hole ID: MGRC011
Project: Mt Garnet
Commodity: tungsten
Region: australia_qld
Reported Region: australia_qld
Ticker: KOB

Geometry

Grade: 571
Grade Unit: ppm
Intercept: 2 m
From: 130 m
To: 132 m
Hole Depth: 162 m
Intercept Depth: 111 m

Classification

Deposit Type: other
Program: exploration
Sample Type: drill
Group ID: MGRC011:130-132
Mining Method: underground

Location

Easting: 279795
Northing: 8059962
Elevation: 642 m
Azimuth: 44 °
Dip: -70 °
Loc. Confidence: high
Loc. Source: document

QA/QC

Laboratory: Intertek Minerals Townsville Laboratory and Intertek Genalysis Perth
QA/QC Disclosed: Yes
QP Signed: Yes
QA/QC Methods: standards, blanks, duplicates

Compositing

Cutoff Grade: 2
Cutoff Unit: % Sn
Dilution Disclosed: Yes
Max Dilution: 2 m

Review

Needs Review: No
Interp. Status: scored
Historical: No

Dates

Event date: 2026-10-13T00:00:00.000Z

Reasoning: The tungsten grade of 571 ppm over 2m is very low and unlikely to be economic, but is noted as associated mineralization.

Positive factors

Associated mineralization in a new discovery

Negative factors

Very low tungsten grade
True width not known

Tags used in scoring

QA/QC Disclosedpositive

Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).

Why it applies: qaqc_disclosed is true

Compositing Transparentpositive

Cut-off grade and internal dilution rules are clearly stated for reported intervals.

Why it applies: cutoff_grade and internal dilution are both stated

Nearology Playneutral

Value premise rests on proximity to a known deposit rather than own results.

Why it applies: proximity is offered as the value premise: "21 initial broadly spaced drill holes were completed at the Stannex Prospect, approximately 1km northeast of the Gilmore"

MGRC011Mt Garnet · copperGrade: 1.16Grade Unit: %Intercept: 2 mView all details

Link to this fact

Identity

Hole ID: MGRC011
Project: Mt Garnet
Commodity: copper
Region: australia_qld
Reported Region: australia_qld
Ticker: KOB

Geometry

Grade: 1.16
Grade Unit: %
Intercept: 2 m
From: 130 m
To: 132 m
Hole Depth: 162 m
Intercept Depth: 111 m

Classification

Deposit Type: other
Program: exploration
Sample Type: drill
Group ID: MGRC011:130-132
Mining Method: underground

Location

Easting: 279795
Northing: 8059962
Elevation: 642 m
Azimuth: 44 °
Dip: -70 °
Loc. Confidence: high
Loc. Source: document

QA/QC

Laboratory: Intertek Minerals Townsville Laboratory and Intertek Genalysis Perth
QA/QC Disclosed: Yes
QP Signed: Yes
QA/QC Methods: standards, blanks, duplicates

Compositing

Cutoff Grade: 2
Cutoff Unit: % Sn
Dilution Disclosed: Yes
Max Dilution: 2 m

Review

Needs Review: No
Interp. Status: scored
Historical: No

Dates

Event date: 2026-10-13T00:00:00.000Z

Reasoning: The copper grade of 1.16% over 2m is a moderate grade for an underground target, representing associated mineralization within a high-grade tin zone.

Positive factors

Moderate copper grade for an underground target
Associated mineralization in a new discovery

Negative factors

True width not known

Tags used in scoring

QA/QC Disclosedpositive

Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).

Why it applies: qaqc_disclosed is true

Compositing Transparentpositive

Cut-off grade and internal dilution rules are clearly stated for reported intervals.

Why it applies: cutoff_grade and internal dilution are both stated

Nearology Playneutral

Value premise rests on proximity to a known deposit rather than own results.

Why it applies: proximity is offered as the value premise: "21 initial broadly spaced drill holes were completed at the Stannex Prospect, approximately 1km northeast of the Gilmore"

MGRC011Mt Garnet · zincGrade: 0.65Grade Unit: %Intercept: 2 mView all details

Link to this fact

Identity

Hole ID: MGRC011
Project: Mt Garnet
Commodity: zinc
Region: australia_qld
Reported Region: australia_qld
Ticker: KOB

Geometry

Grade: 0.65
Grade Unit: %
Intercept: 2 m
From: 130 m
To: 132 m
Hole Depth: 162 m
Intercept Depth: 111 m

Classification

Deposit Type: other
Program: exploration
Sample Type: drill
Group ID: MGRC011:130-132
Mining Method: underground

Location

Easting: 279795
Northing: 8059962
Elevation: 642 m
Azimuth: 44 °
Dip: -70 °
Loc. Confidence: high
Loc. Source: document

QA/QC

Laboratory: Intertek Minerals Townsville Laboratory and Intertek Genalysis Perth
QA/QC Disclosed: Yes
QP Signed: Yes
QA/QC Methods: standards, blanks, duplicates

Compositing

Cutoff Grade: 2
Cutoff Unit: % Sn
Dilution Disclosed: Yes
Max Dilution: 2 m

Review

Needs Review: No
Interp. Status: scored
Historical: No

Dates

Event date: 2026-10-13T00:00:00.000Z

Reasoning: The zinc grade of 0.65% over 2m is a weak grade for an underground target, but represents associated mineralization within a high-grade tin zone.

Positive factors

Associated mineralization in a new discovery

Negative factors

Weak zinc grade for an underground target
True width not known

Tags used in scoring

QA/QC Disclosedpositive

Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).

Why it applies: qaqc_disclosed is true

Compositing Transparentpositive

Cut-off grade and internal dilution rules are clearly stated for reported intervals.

Why it applies: cutoff_grade and internal dilution are both stated

Nearology Playneutral

Value premise rests on proximity to a known deposit rather than own results.

Why it applies: proximity is offered as the value premise: "21 initial broadly spaced drill holes were completed at the Stannex Prospect, approximately 1km northeast of the Gilmore"

MGRC011Mt Garnet · silverGrade: 53Grade Unit: g/tIntercept: 2 mView all details

Link to this fact

Identity

Hole ID: MGRC011
Project: Mt Garnet
Commodity: silver
Region: australia_qld
Reported Region: australia_qld
Ticker: KOB

Geometry

Grade: 53
Grade Unit: g/t
Intercept: 2 m
From: 130 m
To: 132 m
Hole Depth: 162 m
Intercept Depth: 111 m

Classification

Deposit Type: other
Program: exploration
Sample Type: drill
Group ID: MGRC011:130-132
Mining Method: underground

Location

Easting: 279795
Northing: 8059962
Elevation: 642 m
Azimuth: 44 °
Dip: -70 °
Loc. Confidence: high
Loc. Source: document

QA/QC

Laboratory: Intertek Minerals Townsville Laboratory and Intertek Genalysis Perth
QA/QC Disclosed: Yes
QP Signed: Yes
QA/QC Methods: standards, blanks, duplicates

Compositing

Cutoff Grade: 2
Cutoff Unit: % Sn
Dilution Disclosed: Yes
Max Dilution: 2 m

Review

Needs Review: No
Interp. Status: scored
Historical: No

Dates

Event date: 2026-10-13T00:00:00.000Z

Reasoning: The silver grade of 53 g/t over 2m is a weak grade for an underground target, representing associated mineralization within a high-grade tin zone, though confidence is reduced by the high detection limit.

Positive factors

Weak silver grade for an underground target
Associated mineralization in a new discovery

Negative factors

True width not known
High detection limit for silver (10 g/t) reduces confidence in reported values

Tags used in scoring

QA/QC Disclosedpositive

Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).

Why it applies: qaqc_disclosed is true

Compositing Transparentpositive

Cut-off grade and internal dilution rules are clearly stated for reported intervals.

Why it applies: cutoff_grade and internal dilution are both stated

Nearology Playneutral

Value premise rests on proximity to a known deposit rather than own results.

Why it applies: proximity is offered as the value premise: "21 initial broadly spaced drill holes were completed at the Stannex Prospect, approximately 1km northeast of the Gilmore"

MGRC011Mt Garnet · indiumGrade: 34.6Grade Unit: g/tIntercept: 2 mView all details

Link to this fact

Identity

Hole ID: MGRC011
Project: Mt Garnet
Commodity: indium
Region: australia_qld
Reported Region: australia_qld
Ticker: KOB

Geometry

Grade: 34.6
Grade Unit: g/t
Intercept: 2 m
From: 130 m
To: 132 m
Hole Depth: 162 m
Intercept Depth: 111 m

Classification

Deposit Type: other
Program: exploration
Sample Type: drill
Group ID: MGRC011:130-132
Mining Method: underground

Location

Easting: 279795
Northing: 8059962
Elevation: 642 m
Azimuth: 44 °
Dip: -70 °
Loc. Confidence: high
Loc. Source: document

QA/QC

Laboratory: Intertek Minerals Townsville Laboratory and Intertek Genalysis Perth
QA/QC Disclosed: Yes
QP Signed: Yes
QA/QC Methods: standards, blanks, duplicates

Compositing

Cutoff Grade: 2
Cutoff Unit: % Sn
Dilution Disclosed: Yes
Max Dilution: 2 m

Review

Needs Review: No
Interp. Status: scored
Historical: No

Dates

Event date: 2026-10-13T00:00:00.000Z

Reasoning: The indium grade of 34.6 g/t over 2m is a weak grade for an underground target, but represents associated mineralization within a high-grade tin zone.

Positive factors

Associated mineralization in a new discovery

Negative factors

Weak indium grade for an underground target
True width not known

Tags used in scoring

QA/QC Disclosedpositive

Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).

Why it applies: qaqc_disclosed is true

Compositing Transparentpositive

Cut-off grade and internal dilution rules are clearly stated for reported intervals.

Why it applies: cutoff_grade and internal dilution are both stated

Nearology Playneutral

Value premise rests on proximity to a known deposit rather than own results.

Why it applies: proximity is offered as the value premise: "21 initial broadly spaced drill holes were completed at the Stannex Prospect, approximately 1km northeast of the Gilmore"

How Atlas produces this analysis

Minestarters Atlas uses automated extraction to summarize mining announcements, identify reported measurements, and classify supporting evidence. Sentiment reflects the extracted narrative and classification rules; it is an interpretation, not a reported measurement. Evidence quotes and context are provided where available. Missing data, low-confidence results, and review flags indicate limitations. Check the original publisher announcement before relying on an interpretation.