KFM: Quarterly Activities/Appendix 5B Cash Flow Report
Original announcement by asx on
- Company
- Kingfisher Mining Limited
- Ticker
- KFM
- Exchange
- ASX
- Region
- Broken Hill, NSW
- Primary commodity
- Copper
- Secondary commodities
- Gold, Silver, Lead, Zinc
- Document categories
- Drill results, Capital raise
- Extracted
- 2026-10-20 22:34:54 UTC
Analysis by Minestarters Atlas
Atlas analysis published:
Minestarters Atlas analysis
Summary
Kingfisher Mining Limited reported significant copper-gold and silver-lead-zinc drilling results from its Copper Blow, Allendale, and Stephens Trig projects during the September quarter. Highlights include high-grade intercepts at Copper Blow extending mineralization, and maiden drilling success at Stephens Trig and Allendale confirming significant silver-lead-zinc mineralization. Subsequent to quarter end, the company secured a $2.25 million capital raise to accelerate exploration activities across its Broken Hill portfolio.
Reasoning: The company reported multiple high-grade copper-gold and silver-lead-zinc drill intercepts across three projects, extending known mineralisation and confirming new zones. This positive exploration news is supported by a recent capital raise to fund future activities.
Positive factors
- High-grade copper intercepts at Copper Blow, including bonanza grades
- Significant extension of copper-gold mineralisation at Copper Blow
- Maiden drilling programs at Stephens Trig and Allendale confirm high-grade silver-lead-zinc mineralisation
- Successful validation of historical mineralisation at Stephens Trig and Allendale
- Capital raise strengthens financial position to accelerate exploration
Negative factors
- No QA/QC disclosure for drill results
- True width not disclosed for intercepts
Low confidence — this extraction should be reviewed alongside the original source.
Facts used in scoring: 62
Extracted facts
Stored fact records: 62. Some facts used in scoring do not have a stored record.
Drill Results (62)
26CBRC_081Copper Blow · copperGrade: 2.57Grade Unit: %Intercept: 26 mView all detailsHide details
Identity
- Hole ID
- 26CBRC_081
- Project
- Copper Blow
- Commodity
- copper
- Region
- australia_nsw
- Reported Region
- australia_nsw
- Ticker
- KFM
Geometry
- Grade
- 2.57
- Grade Unit
- %
- Intercept
- 26 m
- From
- 73 m
- To
- 99 m
- Hole Depth
- 120 m
- Intercept Depth
- 73 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- 26CBRC_081:73-99
- Mining Method
- open_pit
Location
- Location
- North Zone
- Easting
- 547862
- Northing
- 6445221
- Elevation
- 235 m
- Azimuth
- 141 °
- Dip
- -60 °
- Loc. Confidence
- high
- Loc. Source
- document
Deleterious
- Deleterious Flag
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-10-20T00:00:00.000Z
Reasoning: A strong copper intercept extending mineralisation at Copper Blow.
Positive factors
- Strong grade
- Strong width
- Step-Out Extension
Negative factors
- Apparent Width Only
- No QA/QC Disclosure
Evidence · text
“26m @ 2.57% Cu and 0.75g/t Au from 73m”
Tags used in scoring
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Rejected tags
Rejected tags — excluded from scoring because their label or evidence could not be verified.
Step-Out ExtensionRejected · positive
Mineralization extended beyond the previously known limit.
Reason: The intercept is described as 'further extending mineralisation'.
Evidence · text
“further extending mineralisation”
Apparent Width OnlyRejected · negative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Reason: The interval is given as downhole width with no true width or drill orientation.
Evidence · text
“26m @ 2.57% Cu”
No QA/QC DisclosureRejected · negative
Release does not disclose QA/QC — lab certification, CP/QP sign-off and assay protocols cannot be checked from this document.
Reason: The release does not disclose QA/QC procedures, lab certification, or CP/QP sign-off.
Evidence · text
“Kingfisher Mining Limited (ASX:KFM) (“Kingfisher” or the “Company”) is pleased to present the quarterly activities report for the period ending 30 September 2026.”
26CBRC_081Copper Blow · goldGrade: 0.75Grade Unit: g/tIntercept: 26 mView all detailsHide details
Identity
- Hole ID
- 26CBRC_081
- Project
- Copper Blow
- Commodity
- gold
- Region
- australia_nsw
- Reported Region
- australia_nsw
- Ticker
- KFM
Geometry
- Grade
- 0.75
- Grade Unit
- g/t
- Intercept
- 26 m
- From
- 73 m
- To
- 99 m
- Intercept Depth
- 73 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- 26CBRC_081:73-99
- Mining Method
- open_pit
Location
- Location
- North Zone
- Loc. Source
- document
Deleterious
- Deleterious Flag
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-10-20T00:00:00.000Z
Reasoning: A moderate gold intercept extending mineralisation at Copper Blow.
Positive factors
- Moderate grade
- Strong width
- Step-Out Extension
Negative factors
- Apparent Width Only
- No QA/QC Disclosure
Evidence · text
“26m @ 2.57% Cu and 0.75g/t Au from 73m”
Tags used in scoring
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Rejected tags
Rejected tags — excluded from scoring because their label or evidence could not be verified.
Step-Out ExtensionRejected · positive
Mineralization extended beyond the previously known limit.
Reason: The intercept is described as 'further extending mineralisation'.
Evidence · text
“further extending mineralisation”
Apparent Width OnlyRejected · negative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Reason: The interval is given as downhole width with no true width or drill orientation.
Evidence · text
“26m @ 2.57% Cu and 0.75g/t Au”
No QA/QC DisclosureRejected · negative
Release does not disclose QA/QC — lab certification, CP/QP sign-off and assay protocols cannot be checked from this document.
Reason: The release does not disclose QA/QC procedures, lab certification, or CP/QP sign-off.
Evidence · text
“Kingfisher Mining Limited (ASX:KFM) (“Kingfisher” or the “Company”) is pleased to present the quarterly activities report for the period ending 30 September 2026.”
26CBRC_080Copper Blow · copperGrade: 1.32Grade Unit: %Intercept: 43 mView all detailsHide details
Identity
- Hole ID
- 26CBRC_080
- Project
- Copper Blow
- Commodity
- copper
- Region
- australia_nsw
- Reported Region
- australia_nsw
- Ticker
- KFM
Geometry
- Grade
- 1.32
- Grade Unit
- %
- Intercept
- 43 m
- From
- 0 m
- To
- 43 m
- Hole Depth
- 90 m
- Intercept Depth
- 0 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- 26CBRC_080:0-43
- Mining Method
- open_pit
Location
- Location
- North Zone
- Easting
- 547887
- Northing
- 6445185
- Elevation
- 237 m
- Azimuth
- 142 °
- Dip
- -58 °
- Loc. Confidence
- high
- Loc. Source
- document
Deleterious
- Deleterious Flag
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-10-20T00:00:00.000Z
Reasoning: A strong copper intercept from surface, extending mineralisation at Copper Blow.
Positive factors
- Strong grade
- Continuous width
- Step-Out Extension
Negative factors
- Apparent Width Only
- No QA/QC Disclosure
Evidence · text
“43m @ 1.32% Cu and 0.32g/t Au from surface”
Tags used in scoring
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Rejected tags
Rejected tags — excluded from scoring because their label or evidence could not be verified.
Step-Out ExtensionRejected · positive
Mineralization extended beyond the previously known limit.
Reason: The intercept is described as 'further extending mineralisation'.
Evidence · text
“further extending mineralisation”
Apparent Width OnlyRejected · negative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Reason: The interval is given as downhole width with no true width or drill orientation.
Evidence · text
“43m @ 1.32% Cu”
No QA/QC DisclosureRejected · negative
Release does not disclose QA/QC — lab certification, CP/QP sign-off and assay protocols cannot be checked from this document.
Reason: The release does not disclose QA/QC procedures, lab certification, or CP/QP sign-off.
Evidence · text
“Kingfisher Mining Limited (ASX:KFM) (“Kingfisher” or the “Company”) is pleased to present the quarterly activities report for the period ending 30 September 2026.”
26CBRC_080Copper Blow · goldGrade: 0.32Grade Unit: g/tIntercept: 43 mView all detailsHide details
Identity
- Hole ID
- 26CBRC_080
- Project
- Copper Blow
- Commodity
- gold
- Region
- australia_nsw
- Reported Region
- australia_nsw
- Ticker
- KFM
Geometry
- Grade
- 0.32
- Grade Unit
- g/t
- Intercept
- 43 m
- From
- 0 m
- To
- 43 m
- Intercept Depth
- 0 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- 26CBRC_080:0-43
- Mining Method
- open_pit
Location
- Location
- North Zone
- Loc. Source
- document
Deleterious
- Deleterious Flag
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-10-20T00:00:00.000Z
Reasoning: A weak gold intercept from surface, extending mineralisation at Copper Blow.
Positive factors
- Weak grade
- Continuous width
- Step-Out Extension
Negative factors
- Apparent Width Only
- No QA/QC Disclosure
Evidence · text
“43m @ 1.32% Cu and 0.32g/t Au from surface”
Tags used in scoring
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Rejected tags
Rejected tags — excluded from scoring because their label or evidence could not be verified.
Step-Out ExtensionRejected · positive
Mineralization extended beyond the previously known limit.
Reason: The intercept is described as 'further extending mineralisation'.
Evidence · text
“further extending mineralisation”
Apparent Width OnlyRejected · negative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Reason: The interval is given as downhole width with no true width or drill orientation.
Evidence · text
“43m @ 1.32% Cu and 0.32g/t Au”
No QA/QC DisclosureRejected · negative
Release does not disclose QA/QC — lab certification, CP/QP sign-off and assay protocols cannot be checked from this document.
Reason: The release does not disclose QA/QC procedures, lab certification, or CP/QP sign-off.
Evidence · text
“Kingfisher Mining Limited (ASX:KFM) (“Kingfisher” or the “Company”) is pleased to present the quarterly activities report for the period ending 30 September 2026.”
Fact 5Allendale · zincGrade: 8.05Grade Unit: %Intercept: 9 mNeeds review: drill_no_hole_idView all detailsHide details
Identity
- Project
- Allendale
- Commodity
- zinc
- Region
- australia_nsw
- Reported Region
- australia_nsw
- Ticker
- KFM
Geometry
- Grade
- 8.05
- Grade Unit
- %
- Intercept
- 9 m
- From
- 64 m
- To
- 73 m
- Intercept Depth
- 64 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- Allendale:64-73
- Mining Method
- open_pit
Deleterious
- Deleterious Flag
- No
Review
- Needs Review
- Yes
- Review Reason
- drill_no_hole_id
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-10-20T00:00:00.000Z
Reasoning: A strong lead-zinc intercept from the maiden drilling program at Allendale, validating historical mineralisation.
Positive factors
- Strong grade
- Moderate width
- Maiden Resource
- Infill Drilling
Negative factors
- Apparent Width Only
- No QA/QC Disclosure
Evidence · text
“9m @ 8.05% Pb+Zn and 17.9g/t Ag from 64m”
Tags used in scoring
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Rejected tags
Rejected tags — excluded from scoring because their label or evidence could not be verified.
Maiden ResourceRejected · neutral · Story-specific tag
First formal MRE for the project — establishes baseline but typically exploration-stage with high Inferred component.
Reason: The intercept is from the company's maiden drilling program at Allendale.
Evidence · text
“maiden reverse circulation (RC) drilling program at Allendale”
Infill DrillingRejected · neutral
Confirmatory drilling to raise resource confidence, not new discovery.
Reason: The drilling program was designed to 'validate historical drilling results'.
Evidence · text
“successfully validated historical exploration results”
Apparent Width OnlyRejected · negative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Reason: The interval is given as downhole width with no true width or drill orientation.
Evidence · text
“9m @ 8.05% Pb+Zn”
No QA/QC DisclosureRejected · negative
Release does not disclose QA/QC — lab certification, CP/QP sign-off and assay protocols cannot be checked from this document.
Reason: The release does not disclose QA/QC procedures, lab certification, or CP/QP sign-off.
Evidence · text
“Kingfisher Mining Limited (ASX:KFM) (“Kingfisher” or the “Company”) is pleased to present the quarterly activities report for the period ending 30 September 2026.”
Fact 6Allendale · silverGrade: 17.9Grade Unit: g/tIntercept: 9 mNeeds review: drill_no_hole_idView all detailsHide details
Identity
- Project
- Allendale
- Commodity
- silver
- Region
- australia_nsw
- Reported Region
- australia_nsw
- Ticker
- KFM
Geometry
- Grade
- 17.9
- Grade Unit
- g/t
- Intercept
- 9 m
- From
- 64 m
- To
- 73 m
- Intercept Depth
- 64 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- Allendale:64-73
- Mining Method
- open_pit
Deleterious
- Deleterious Flag
- No
Review
- Needs Review
- Yes
- Review Reason
- drill_no_hole_id
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-10-20T00:00:00.000Z
Reasoning: A weak silver intercept from the maiden drilling program at Allendale, validating historical mineralisation.
Positive factors
- Weak grade
- Moderate width
- Maiden Resource
- Infill Drilling
Negative factors
- Apparent Width Only
- No QA/QC Disclosure
Evidence · text
“9m @ 8.05% Pb+Zn and 17.9g/t Ag from 64m”
Tags used in scoring
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Rejected tags
Rejected tags — excluded from scoring because their label or evidence could not be verified.
Maiden ResourceRejected · neutral · Story-specific tag
First formal MRE for the project — establishes baseline but typically exploration-stage with high Inferred component.
Reason: The intercept is from the company's maiden drilling program at Allendale.
Evidence · text
“maiden reverse circulation (RC) drilling program at Allendale”
Infill DrillingRejected · neutral
Confirmatory drilling to raise resource confidence, not new discovery.
Reason: The drilling program was designed to 'validate historical drilling results'.
Evidence · text
“successfully validated historical exploration results”
Apparent Width OnlyRejected · negative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Reason: The interval is given as downhole width with no true width or drill orientation.
Evidence · text
“9m @ 8.05% Pb+Zn and 17.9g/t Ag”
No QA/QC DisclosureRejected · negative
Release does not disclose QA/QC — lab certification, CP/QP sign-off and assay protocols cannot be checked from this document.
Reason: The release does not disclose QA/QC procedures, lab certification, or CP/QP sign-off.
Evidence · text
“Kingfisher Mining Limited (ASX:KFM) (“Kingfisher” or the “Company”) is pleased to present the quarterly activities report for the period ending 30 September 2026.”
Fact 7Stephens Trig · zincGrade: 7.4Grade Unit: %Intercept: 5 mNeeds review: drill_no_hole_idView all detailsHide details
Identity
- Project
- Stephens Trig
- Commodity
- zinc
- Region
- australia_nsw
- Reported Region
- australia_nsw
- Ticker
- KFM
Geometry
- Grade
- 7.4
- Grade Unit
- %
- Intercept
- 5 m
- From
- 79 m
- To
- 84 m
- Intercept Depth
- 79 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- Stephens_Trig:79-84
- Mining Method
- open_pit
Deleterious
- Deleterious Flag
- No
Review
- Needs Review
- Yes
- Review Reason
- drill_no_hole_id
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-10-20T00:00:00.000Z
Reasoning: A strong lead-zinc intercept from the maiden drilling program at Stephens Trig, confirming significant mineralisation.
Positive factors
- Strong grade
- Moderate width
- Maiden Resource
- Infill Drilling
Negative factors
- Apparent Width Only
- No QA/QC Disclosure
Evidence · text
“5m @ 7.4% Pb+Zn and 10g/t Ag from 79m”
Tags used in scoring
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Rejected tags
Rejected tags — excluded from scoring because their label or evidence could not be verified.
Maiden ResourceRejected · neutral · Story-specific tag
First formal MRE for the project — establishes baseline but typically exploration-stage with high Inferred component.
Reason: The intercept is from the company's maiden drilling program at Stephens Trig.
Evidence · text
“maiden reverse circulation (RC) drilling program at Stephens Trig”
Infill DrillingRejected · neutral
Confirmatory drilling to raise resource confidence, not new discovery.
Reason: The drilling program 'successfully validated historical mineralisation'.
Evidence · text
“successfully validated historical mineralisation”
Apparent Width OnlyRejected · negative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Reason: The interval is given as downhole width with no true width or drill orientation.
Evidence · text
“5m @ 7.4% Pb+Zn”
No QA/QC DisclosureRejected · negative
Release does not disclose QA/QC — lab certification, CP/QP sign-off and assay protocols cannot be checked from this document.
Reason: The release does not disclose QA/QC procedures, lab certification, or CP/QP sign-off.
Evidence · text
“Kingfisher Mining Limited (ASX:KFM) (“Kingfisher” or the “Company”) is pleased to present the quarterly activities report for the period ending 30 September 2026.”
Fact 8Stephens Trig · silverGrade: 10Grade Unit: g/tIntercept: 5 mNeeds review: drill_no_hole_idView all detailsHide details
Identity
- Project
- Stephens Trig
- Commodity
- silver
- Region
- australia_nsw
- Reported Region
- australia_nsw
- Ticker
- KFM
Geometry
- Grade
- 10
- Grade Unit
- g/t
- Intercept
- 5 m
- From
- 79 m
- To
- 84 m
- Intercept Depth
- 79 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- Stephens_Trig:79-84
- Mining Method
- open_pit
Deleterious
- Deleterious Flag
- No
Review
- Needs Review
- Yes
- Review Reason
- drill_no_hole_id
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-10-20T00:00:00.000Z
Reasoning: A weak silver intercept from the maiden drilling program at Stephens Trig, confirming significant mineralisation.
Positive factors
- Weak grade
- Moderate width
- Maiden Resource
- Infill Drilling
Negative factors
- Apparent Width Only
- No QA/QC Disclosure
Evidence · text
“5m @ 7.4% Pb+Zn and 10g/t Ag from 79m”
Tags used in scoring
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Rejected tags
Rejected tags — excluded from scoring because their label or evidence could not be verified.
Maiden ResourceRejected · neutral · Story-specific tag
First formal MRE for the project — establishes baseline but typically exploration-stage with high Inferred component.
Reason: The intercept is from the company's maiden drilling program at Stephens Trig.
Evidence · text
“maiden reverse circulation (RC) drilling program at Stephens Trig”
Infill DrillingRejected · neutral
Confirmatory drilling to raise resource confidence, not new discovery.
Reason: The drilling program 'successfully validated historical mineralisation'.
Evidence · text
“successfully validated historical mineralisation”
Apparent Width OnlyRejected · negative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Reason: The interval is given as downhole width with no true width or drill orientation.
Evidence · text
“5m @ 7.4% Pb+Zn and 10g/t Ag”
No QA/QC DisclosureRejected · negative
Release does not disclose QA/QC — lab certification, CP/QP sign-off and assay protocols cannot be checked from this document.
Reason: The release does not disclose QA/QC procedures, lab certification, or CP/QP sign-off.
Evidence · text
“Kingfisher Mining Limited (ASX:KFM) (“Kingfisher” or the “Company”) is pleased to present the quarterly activities report for the period ending 30 September 2026.”
Fact 9Stephens Trig · zincGrade: 17.5Grade Unit: %Intercept: 2 mNeeds review: drill_no_hole_idView all detailsHide details
Identity
- Project
- Stephens Trig
- Commodity
- zinc
- Region
- australia_nsw
- Reported Region
- australia_nsw
- Ticker
- KFM
Geometry
- Grade
- 17.5
- Grade Unit
- %
- Intercept
- 2 m
- From
- 79 m
- To
- 81 m
- Intercept Depth
- 79 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- Stephens_Trig:79-81
- Mining Method
- open_pit
Deleterious
- Deleterious Flag
- No
Review
- Needs Review
- Yes
- Review Reason
- drill_no_hole_id
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-10-20T00:00:00.000Z
Reasoning: An exceptional lead-zinc intercept from the maiden drilling program at Stephens Trig, confirming significant mineralisation.
Positive factors
- Bonanza Intercept
- Exceptional grade
- Maiden Resource
- Infill Drilling
Negative factors
- Apparent Width Only
- No QA/QC Disclosure
Evidence · text
“2m @ 17.5% Pb+Zn and 24g/t Ag”
Tags used in scoring
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Rejected tags
Rejected tags — excluded from scoring because their label or evidence could not be verified.
Bonanza InterceptRejected · positive
Exceptionally high-grade zone, well above the deposit-type norm.
Reason: The lead-zinc grade of 17.5% is exceptionally high for a Sedex deposit.
Evidence · text
“17.5% Pb+Zn”
Maiden ResourceRejected · neutral · Story-specific tag
First formal MRE for the project — establishes baseline but typically exploration-stage with high Inferred component.
Reason: The intercept is from the company's maiden drilling program at Stephens Trig.
Evidence · text
“maiden reverse circulation (RC) drilling program at Stephens Trig”
Infill DrillingRejected · neutral
Confirmatory drilling to raise resource confidence, not new discovery.
Reason: The drilling program 'successfully validated historical mineralisation'.
Evidence · text
“successfully validated historical mineralisation”
Apparent Width OnlyRejected · negative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Reason: The interval is given as downhole width with no true width or drill orientation.
Evidence · text
“2m @ 17.5% Pb+Zn”
No QA/QC DisclosureRejected · negative
Release does not disclose QA/QC — lab certification, CP/QP sign-off and assay protocols cannot be checked from this document.
Reason: The release does not disclose QA/QC procedures, lab certification, or CP/QP sign-off.
Evidence · text
“Kingfisher Mining Limited (ASX:KFM) (“Kingfisher” or the “Company”) is pleased to present the quarterly activities report for the period ending 30 September 2026.”
Fact 10Stephens Trig · silverGrade: 24Grade Unit: g/tIntercept: 2 mNeeds review: drill_no_hole_idView all detailsHide details
Identity
- Project
- Stephens Trig
- Commodity
- silver
- Region
- australia_nsw
- Reported Region
- australia_nsw
- Ticker
- KFM
Geometry
- Grade
- 24
- Grade Unit
- g/t
- Intercept
- 2 m
- From
- 79 m
- To
- 81 m
- Intercept Depth
- 79 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- Stephens_Trig:79-81
- Mining Method
- open_pit
Deleterious
- Deleterious Flag
- No
Review
- Needs Review
- Yes
- Review Reason
- drill_no_hole_id
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-10-20T00:00:00.000Z
Reasoning: A weak silver intercept from the maiden drilling program at Stephens Trig, confirming significant mineralisation.
Positive factors
- Weak grade
- Maiden Resource
- Infill Drilling
Negative factors
- Apparent Width Only
- No QA/QC Disclosure
Evidence · text
“2m @ 17.5% Pb+Zn and 24g/t Ag”
Tags used in scoring
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Rejected tags
Rejected tags — excluded from scoring because their label or evidence could not be verified.
Maiden ResourceRejected · neutral · Story-specific tag
First formal MRE for the project — establishes baseline but typically exploration-stage with high Inferred component.
Reason: The intercept is from the company's maiden drilling program at Stephens Trig.
Evidence · text
“maiden reverse circulation (RC) drilling program at Stephens Trig”
Infill DrillingRejected · neutral
Confirmatory drilling to raise resource confidence, not new discovery.
Reason: The drilling program 'successfully validated historical mineralisation'.
Evidence · text
“successfully validated historical mineralisation”
Apparent Width OnlyRejected · negative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Reason: The interval is given as downhole width with no true width or drill orientation.
Evidence · text
“2m @ 17.5% Pb+Zn and 24g/t Ag”
No QA/QC DisclosureRejected · negative
Release does not disclose QA/QC — lab certification, CP/QP sign-off and assay protocols cannot be checked from this document.
Reason: The release does not disclose QA/QC procedures, lab certification, or CP/QP sign-off.
Evidence · text
“Kingfisher Mining Limited (ASX:KFM) (“Kingfisher” or the “Company”) is pleased to present the quarterly activities report for the period ending 30 September 2026.”
26CBRC_079Copper Blow · copperGrade: 0.43Grade Unit: %Intercept: 24 mView all detailsHide details
Identity
- Hole ID
- 26CBRC_079
- Project
- Copper Blow
- Commodity
- copper
- Region
- australia_nsw
- Reported Region
- australia_nsw
- Ticker
- KFM
Geometry
- Grade
- 0.43
- Grade Unit
- %
- Intercept
- 24 m
- From
- 41 m
- To
- 65 m
- Hole Depth
- 90 m
- Intercept Depth
- 41 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- 26CBRC_079:41-65
- Mining Method
- open_pit
Location
- Location
- North Zone
- Easting
- 547995
- Northing
- 6445312
- Elevation
- 234 m
- Azimuth
- 142 °
- Dip
- -53 °
- Loc. Confidence
- high
- Loc. Source
- document
Deleterious
- Deleterious Flag
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-10-20T00:00:00.000Z
Reasoning: A moderate copper intercept from Copper Blow.
Positive factors
- Strong width
- Moderate grade
Negative factors
- Apparent Width Only
- No QA/QC Disclosure
Evidence · table
“0.43”
Context: 24
Tags used in scoring
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Rejected tags
Rejected tags — excluded from scoring because their label or evidence could not be verified.
Apparent Width OnlyRejected · negative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Reason: The interval is given as downhole width with no true width or drill orientation.
Evidence · table
“24”
Context: 24
No QA/QC DisclosureRejected · negative
Release does not disclose QA/QC — lab certification, CP/QP sign-off and assay protocols cannot be checked from this document.
Reason: The release does not disclose QA/QC procedures, lab certification, or CP/QP sign-off.
Evidence · text
“Kingfisher Mining Limited (ASX:KFM) (“Kingfisher” or the “Company”) is pleased to present the quarterly activities report for the period ending 30 September 2026.”
26CBRC_079Copper Blow · copperGrade: 1.03Grade Unit: %Intercept: 7 mView all detailsHide details
Identity
- Hole ID
- 26CBRC_079
- Project
- Copper Blow
- Commodity
- copper
- Region
- australia_nsw
- Reported Region
- australia_nsw
- Ticker
- KFM
Geometry
- Grade
- 1.03
- Grade Unit
- %
- Intercept
- 7 m
- From
- 41 m
- To
- 48 m
- Hole Depth
- 90 m
- Intercept Depth
- 41 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- 26CBRC_079:41-48
- Mining Method
- open_pit
Location
- Location
- North Zone
- Easting
- 547995
- Northing
- 6445312
- Elevation
- 234 m
- Azimuth
- 142 °
- Dip
- -53 °
- Loc. Confidence
- high
- Loc. Source
- document
Deleterious
- Deleterious Flag
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-10-20T00:00:00.000Z
Reasoning: A strong copper sub-intercept from Copper Blow.
Positive factors
- Strong grade
- Moderate width
Negative factors
- Apparent Width Only
- No QA/QC Disclosure
Evidence · table
“1.03”
Context: 7
Tags used in scoring
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Rejected tags
Rejected tags — excluded from scoring because their label or evidence could not be verified.
Apparent Width OnlyRejected · negative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Reason: The interval is given as downhole width with no true width or drill orientation.
Evidence · table
“7”
Context: 7
No QA/QC DisclosureRejected · negative
Release does not disclose QA/QC — lab certification, CP/QP sign-off and assay protocols cannot be checked from this document.
Reason: The release does not disclose QA/QC procedures, lab certification, or CP/QP sign-off.
Evidence · text
“Kingfisher Mining Limited (ASX:KFM) (“Kingfisher” or the “Company”) is pleased to present the quarterly activities report for the period ending 30 September 2026.”
26CBRC_080Copper Blow · copperGrade: 2.46Grade Unit: %Intercept: 17 mView all detailsHide details
Identity
- Hole ID
- 26CBRC_080
- Project
- Copper Blow
- Commodity
- copper
- Region
- australia_nsw
- Reported Region
- australia_nsw
- Ticker
- KFM
Geometry
- Grade
- 2.46
- Grade Unit
- %
- Intercept
- 17 m
- From
- 16 m
- To
- 33 m
- Hole Depth
- 90 m
- Intercept Depth
- 0 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- 26CBRC_080:16-33
- Mining Method
- open_pit
Location
- Location
- North Zone
- Easting
- 547887
- Northing
- 6445185
- Elevation
- 237 m
- Azimuth
- 142 °
- Dip
- -58 °
- Loc. Confidence
- high
- Loc. Source
- document
Deleterious
- Deleterious Flag
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-10-20T00:00:00.000Z
Reasoning: A strong copper sub-intercept from Copper Blow.
Positive factors
- Strong grade
- Strong width
Negative factors
- Apparent Width Only
- No QA/QC Disclosure
Evidence · table
“2.46”
Context: 17
Tags used in scoring
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Rejected tags
Rejected tags — excluded from scoring because their label or evidence could not be verified.
Apparent Width OnlyRejected · negative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Reason: The interval is given as downhole width with no true width or drill orientation.
Evidence · table
“17”
Context: 17
No QA/QC DisclosureRejected · negative
Release does not disclose QA/QC — lab certification, CP/QP sign-off and assay protocols cannot be checked from this document.
Reason: The release does not disclose QA/QC procedures, lab certification, or CP/QP sign-off.
Evidence · text
“Kingfisher Mining Limited (ASX:KFM) (“Kingfisher” or the “Company”) is pleased to present the quarterly activities report for the period ending 30 September 2026.”
26CBRC_080Copper Blow · copperGrade: 3.73Grade Unit: %Intercept: 5 mView all detailsHide details
Identity
- Hole ID
- 26CBRC_080
- Project
- Copper Blow
- Commodity
- copper
- Region
- australia_nsw
- Reported Region
- australia_nsw
- Ticker
- KFM
Geometry
- Grade
- 3.73
- Grade Unit
- %
- Intercept
- 5 m
- From
- 24 m
- To
- 29 m
- Hole Depth
- 90 m
- Intercept Depth
- 0 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- 26CBRC_080:24-29
- Mining Method
- open_pit
Location
- Location
- North Zone
- Easting
- 547887
- Northing
- 6445185
- Elevation
- 237 m
- Azimuth
- 142 °
- Dip
- -58 °
- Loc. Confidence
- high
- Loc. Source
- document
Deleterious
- Deleterious Flag
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-10-20T00:00:00.000Z
Reasoning: An exceptional copper sub-intercept from Copper Blow.
Positive factors
- Bonanza Intercept
- Exceptional grade
- Moderate width
Negative factors
- Apparent Width Only
- No QA/QC Disclosure
Evidence · table
“3.73”
Context: 5
Tags used in scoring
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Rejected tags
Rejected tags — excluded from scoring because their label or evidence could not be verified.
Bonanza InterceptRejected · positive
Exceptionally high-grade zone, well above the deposit-type norm.
Reason: The copper grade of 3.73% is exceptional for a porphyry deposit.
Evidence · table
“3.73”
Context: 5
Apparent Width OnlyRejected · negative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Reason: The interval is given as downhole width with no true width or drill orientation.
Evidence · table
“5”
Context: 5
No QA/QC DisclosureRejected · negative
Release does not disclose QA/QC — lab certification, CP/QP sign-off and assay protocols cannot be checked from this document.
Reason: The release does not disclose QA/QC procedures, lab certification, or CP/QP sign-off.
Evidence · text
“Kingfisher Mining Limited (ASX:KFM) (“Kingfisher” or the “Company”) is pleased to present the quarterly activities report for the period ending 30 September 2026.”
26CBRC_080Copper Blow · copperGrade: 7.84Grade Unit: %Intercept: 1 mView all detailsHide details
Identity
- Hole ID
- 26CBRC_080
- Project
- Copper Blow
- Commodity
- copper
- Region
- australia_nsw
- Reported Region
- australia_nsw
- Ticker
- KFM
Geometry
- Grade
- 7.84
- Grade Unit
- %
- Intercept
- 1 m
- From
- 31 m
- To
- 32 m
- Hole Depth
- 90 m
- Intercept Depth
- 0 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- 26CBRC_080:31-32
- Mining Method
- open_pit
Location
- Location
- North Zone
- Easting
- 547887
- Northing
- 6445185
- Elevation
- 237 m
- Azimuth
- 142 °
- Dip
- -58 °
- Loc. Confidence
- high
- Loc. Source
- document
Deleterious
- Deleterious Flag
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-10-20T00:00:00.000Z
Reasoning: An exceptional copper sub-intercept from Copper Blow.
Positive factors
- Bonanza Intercept
- Exceptional grade
Negative factors
- Apparent Width Only
- No QA/QC Disclosure
Evidence · table
“7.84”
Context: 1
Tags used in scoring
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Rejected tags
Rejected tags — excluded from scoring because their label or evidence could not be verified.
Bonanza InterceptRejected · positive
Exceptionally high-grade zone, well above the deposit-type norm.
Reason: The copper grade of 7.84% is exceptionally high for a porphyry deposit.
Evidence · table
“7.84”
Context: 1
Apparent Width OnlyRejected · negative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Reason: The interval is given as downhole width with no true width or drill orientation.
Evidence · table
“1”
Context: 1
No QA/QC DisclosureRejected · negative
Release does not disclose QA/QC — lab certification, CP/QP sign-off and assay protocols cannot be checked from this document.
Reason: The release does not disclose QA/QC procedures, lab certification, or CP/QP sign-off.
Evidence · text
“Kingfisher Mining Limited (ASX:KFM) (“Kingfisher” or the “Company”) is pleased to present the quarterly activities report for the period ending 30 September 2026.”
26CBRC_081Copper Blow · copperGrade: 4.07Grade Unit: %Intercept: 13 mView all detailsHide details
Identity
- Hole ID
- 26CBRC_081
- Project
- Copper Blow
- Commodity
- copper
- Region
- australia_nsw
- Reported Region
- australia_nsw
- Ticker
- KFM
Geometry
- Grade
- 4.07
- Grade Unit
- %
- Intercept
- 13 m
- From
- 75 m
- To
- 88 m
- Hole Depth
- 120 m
- Intercept Depth
- 73 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- 26CBRC_081:75-88
- Mining Method
- open_pit
Location
- Location
- North Zone
- Easting
- 547862
- Northing
- 6445221
- Elevation
- 235 m
- Azimuth
- 141 °
- Dip
- -60 °
- Loc. Confidence
- high
- Loc. Source
- document
Deleterious
- Deleterious Flag
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-10-20T00:00:00.000Z
Reasoning: An exceptional copper sub-intercept from Copper Blow.
Positive factors
- Bonanza Intercept
- Exceptional grade
- Moderate width
Negative factors
- Apparent Width Only
- No QA/QC Disclosure
Evidence · table
“4.07”
Context: 13
Tags used in scoring
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Rejected tags
Rejected tags — excluded from scoring because their label or evidence could not be verified.
Bonanza InterceptRejected · positive
Exceptionally high-grade zone, well above the deposit-type norm.
Reason: The copper grade of 4.07% is exceptional for a porphyry deposit.
Evidence · table
“4.07”
Context: 13
Apparent Width OnlyRejected · negative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Reason: The interval is given as downhole width with no true width or drill orientation.
Evidence · table
“13”
Context: 13
No QA/QC DisclosureRejected · negative
Release does not disclose QA/QC — lab certification, CP/QP sign-off and assay protocols cannot be checked from this document.
Reason: The release does not disclose QA/QC procedures, lab certification, or CP/QP sign-off.
Evidence · text
“Kingfisher Mining Limited (ASX:KFM) (“Kingfisher” or the “Company”) is pleased to present the quarterly activities report for the period ending 30 September 2026.”
26CBRC_081Copper Blow · copperGrade: 7.06Grade Unit: %Intercept: 4 mView all detailsHide details
Identity
- Hole ID
- 26CBRC_081
- Project
- Copper Blow
- Commodity
- copper
- Region
- australia_nsw
- Reported Region
- australia_nsw
- Ticker
- KFM
Geometry
- Grade
- 7.06
- Grade Unit
- %
- Intercept
- 4 m
- From
- 76 m
- To
- 80 m
- Hole Depth
- 120 m
- Intercept Depth
- 73 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- 26CBRC_081:76-80
- Mining Method
- open_pit
Location
- Location
- North Zone
- Easting
- 547862
- Northing
- 6445221
- Elevation
- 235 m
- Azimuth
- 141 °
- Dip
- -60 °
- Loc. Confidence
- high
- Loc. Source
- document
Deleterious
- Deleterious Flag
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-10-20T00:00:00.000Z
Reasoning: An exceptional copper sub-intercept from Copper Blow.
Positive factors
- Bonanza Intercept
- Exceptional grade
Negative factors
- Apparent Width Only
- No QA/QC Disclosure
Evidence · table
“7.06”
Context: 4
Tags used in scoring
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Rejected tags
Rejected tags — excluded from scoring because their label or evidence could not be verified.
Bonanza InterceptRejected · positive
Exceptionally high-grade zone, well above the deposit-type norm.
Reason: The copper grade of 7.06% is exceptionally high for a porphyry deposit.
Evidence · table
“7.06”
Context: 4
Apparent Width OnlyRejected · negative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Reason: The interval is given as downhole width with no true width or drill orientation.
Evidence · table
“4”
Context: 4
No QA/QC DisclosureRejected · negative
Release does not disclose QA/QC — lab certification, CP/QP sign-off and assay protocols cannot be checked from this document.
Reason: The release does not disclose QA/QC procedures, lab certification, or CP/QP sign-off.
Evidence · text
“Kingfisher Mining Limited (ASX:KFM) (“Kingfisher” or the “Company”) is pleased to present the quarterly activities report for the period ending 30 September 2026.”
26CBRC_082ACopper Blow · copperGrade: 0.67Grade Unit: %Intercept: 58 mView all detailsHide details
Identity
- Hole ID
- 26CBRC_082A
- Project
- Copper Blow
- Commodity
- copper
- Region
- australia_nsw
- Reported Region
- australia_nsw
- Ticker
- KFM
Geometry
- Grade
- 0.67
- Grade Unit
- %
- Intercept
- 58 m
- From
- 165 m
- To
- 223 m
- Hole Depth
- 226 m
- Intercept Depth
- 165 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- 26CBRC_082A:165-223
- Mining Method
- open_pit
Location
- Location
- North Zone
- Easting
- 547930
- Northing
- 6445335
- Elevation
- 233 m
- Azimuth
- 143 °
- Dip
- -60 °
- Loc. Confidence
- high
- Loc. Source
- document
Deleterious
- Deleterious Flag
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-10-20T00:00:00.000Z
Reasoning: A moderate copper intercept with significant width from Copper Blow.
Positive factors
- Continuous width
- Moderate grade
Negative factors
- Apparent Width Only
- No QA/QC Disclosure
Evidence · table
“0.67”
Context: 58
Tags used in scoring
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Rejected tags
Rejected tags — excluded from scoring because their label or evidence could not be verified.
Apparent Width OnlyRejected · negative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Reason: The interval is given as downhole width with no true width or drill orientation.
Evidence · table
“58”
Context: 58
No QA/QC DisclosureRejected · negative
Release does not disclose QA/QC — lab certification, CP/QP sign-off and assay protocols cannot be checked from this document.
Reason: The release does not disclose QA/QC procedures, lab certification, or CP/QP sign-off.
Evidence · text
“Kingfisher Mining Limited (ASX:KFM) (“Kingfisher” or the “Company”) is pleased to present the quarterly activities report for the period ending 30 September 2026.”
26CBRC_082ACopper Blow · copperGrade: 1.01Grade Unit: %Intercept: 11 mView all detailsHide details
Identity
- Hole ID
- 26CBRC_082A
- Project
- Copper Blow
- Commodity
- copper
- Region
- australia_nsw
- Reported Region
- australia_nsw
- Ticker
- KFM
Geometry
- Grade
- 1.01
- Grade Unit
- %
- Intercept
- 11 m
- From
- 167 m
- To
- 178 m
- Hole Depth
- 226 m
- Intercept Depth
- 165 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- 26CBRC_082A:167-178
- Mining Method
- open_pit
Location
- Location
- North Zone
- Easting
- 547930
- Northing
- 6445335
- Elevation
- 233 m
- Azimuth
- 143 °
- Dip
- -60 °
- Loc. Confidence
- high
- Loc. Source
- document
Deleterious
- Deleterious Flag
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-10-20T00:00:00.000Z
Reasoning: A strong copper sub-intercept from Copper Blow.
Positive factors
- Strong grade
- Moderate width
Negative factors
- Apparent Width Only
- No QA/QC Disclosure
Evidence · table
“1.01”
Context: 11
Tags used in scoring
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Rejected tags
Rejected tags — excluded from scoring because their label or evidence could not be verified.
Apparent Width OnlyRejected · negative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Reason: The interval is given as downhole width with no true width or drill orientation.
Evidence · table
“11”
Context: 11
No QA/QC DisclosureRejected · negative
Release does not disclose QA/QC — lab certification, CP/QP sign-off and assay protocols cannot be checked from this document.
Reason: The release does not disclose QA/QC procedures, lab certification, or CP/QP sign-off.
Evidence · text
“Kingfisher Mining Limited (ASX:KFM) (“Kingfisher” or the “Company”) is pleased to present the quarterly activities report for the period ending 30 September 2026.”
26CBRC_082ACopper Blow · copperGrade: 1.11Grade Unit: %Intercept: 5 mView all detailsHide details
Identity
- Hole ID
- 26CBRC_082A
- Project
- Copper Blow
- Commodity
- copper
- Region
- australia_nsw
- Reported Region
- australia_nsw
- Ticker
- KFM
Geometry
- Grade
- 1.11
- Grade Unit
- %
- Intercept
- 5 m
- From
- 195 m
- To
- 200 m
- Hole Depth
- 226 m
- Intercept Depth
- 165 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- 26CBRC_082A:195-200
- Mining Method
- open_pit
Location
- Location
- North Zone
- Easting
- 547930
- Northing
- 6445335
- Elevation
- 233 m
- Azimuth
- 143 °
- Dip
- -60 °
- Loc. Confidence
- high
- Loc. Source
- document
Deleterious
- Deleterious Flag
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-10-20T00:00:00.000Z
Reasoning: A strong copper sub-intercept from Copper Blow.
Positive factors
- Strong grade
- Moderate width
Negative factors
- Apparent Width Only
- No QA/QC Disclosure
Evidence · table
“1.11”
Context: 5
Tags used in scoring
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Rejected tags
Rejected tags — excluded from scoring because their label or evidence could not be verified.
Apparent Width OnlyRejected · negative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Reason: The interval is given as downhole width with no true width or drill orientation.
Evidence · table
“5”
Context: 5
No QA/QC DisclosureRejected · negative
Release does not disclose QA/QC — lab certification, CP/QP sign-off and assay protocols cannot be checked from this document.
Reason: The release does not disclose QA/QC procedures, lab certification, or CP/QP sign-off.
Evidence · text
“Kingfisher Mining Limited (ASX:KFM) (“Kingfisher” or the “Company”) is pleased to present the quarterly activities report for the period ending 30 September 2026.”
26CBRC_082ACopper Blow · copperGrade: 1.15Grade Unit: %Intercept: 6 mView all detailsHide details
Identity
- Hole ID
- 26CBRC_082A
- Project
- Copper Blow
- Commodity
- copper
- Region
- australia_nsw
- Reported Region
- australia_nsw
- Ticker
- KFM
Geometry
- Grade
- 1.15
- Grade Unit
- %
- Intercept
- 6 m
- From
- 214 m
- To
- 220 m
- Hole Depth
- 226 m
- Intercept Depth
- 165 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- 26CBRC_082A:214-220
- Mining Method
- open_pit
Location
- Location
- North Zone
- Easting
- 547930
- Northing
- 6445335
- Elevation
- 233 m
- Azimuth
- 143 °
- Dip
- -60 °
- Loc. Confidence
- high
- Loc. Source
- document
Deleterious
- Deleterious Flag
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-10-20T00:00:00.000Z
Reasoning: A strong copper sub-intercept from Copper Blow.
Positive factors
- Strong grade
- Moderate width
Negative factors
- Apparent Width Only
- No QA/QC Disclosure
Evidence · table
“1.15”
Context: 6
Tags used in scoring
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Rejected tags
Rejected tags — excluded from scoring because their label or evidence could not be verified.
Apparent Width OnlyRejected · negative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Reason: The interval is given as downhole width with no true width or drill orientation.
Evidence · table
“6”
Context: 6
No QA/QC DisclosureRejected · negative
Release does not disclose QA/QC — lab certification, CP/QP sign-off and assay protocols cannot be checked from this document.
Reason: The release does not disclose QA/QC procedures, lab certification, or CP/QP sign-off.
Evidence · text
“Kingfisher Mining Limited (ASX:KFM) (“Kingfisher” or the “Company”) is pleased to present the quarterly activities report for the period ending 30 September 2026.”
26CBRC_083Copper Blow · copperGrade: 0.95Grade Unit: %Intercept: 2 mView all detailsHide details
Identity
- Hole ID
- 26CBRC_083
- Project
- Copper Blow
- Commodity
- copper
- Region
- australia_nsw
- Reported Region
- australia_nsw
- Ticker
- KFM
Geometry
- Grade
- 0.95
- Grade Unit
- %
- Intercept
- 2 m
- From
- 4 m
- To
- 6 m
- Hole Depth
- 202 m
- Intercept Depth
- 4 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- 26CBRC_083:4-6
- Mining Method
- open_pit
Location
- Location
- North Zone
- Easting
- 547783
- Northing
- 6445120
- Elevation
- 234 m
- Azimuth
- 145 °
- Dip
- -60 °
- Loc. Confidence
- high
- Loc. Source
- document
Deleterious
- Deleterious Flag
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-10-20T00:00:00.000Z
Reasoning: A moderate copper intercept from Copper Blow.
Positive factors
- Moderate grade
Negative factors
- Apparent Width Only
- No QA/QC Disclosure
Evidence · table
“0.95”
Context: 2
Tags used in scoring
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Rejected tags
Rejected tags — excluded from scoring because their label or evidence could not be verified.
Apparent Width OnlyRejected · negative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Reason: The interval is given as downhole width with no true width or drill orientation.
Evidence · table
“2”
Context: 2
No QA/QC DisclosureRejected · negative
Release does not disclose QA/QC — lab certification, CP/QP sign-off and assay protocols cannot be checked from this document.
Reason: The release does not disclose QA/QC procedures, lab certification, or CP/QP sign-off.
Evidence · text
“Kingfisher Mining Limited (ASX:KFM) (“Kingfisher” or the “Company”) is pleased to present the quarterly activities report for the period ending 30 September 2026.”
26CBRC_083Copper Blow · copperGrade: 1.46Grade Unit: %Intercept: 1 mView all detailsHide details
Identity
- Hole ID
- 26CBRC_083
- Project
- Copper Blow
- Commodity
- copper
- Region
- australia_nsw
- Reported Region
- australia_nsw
- Ticker
- KFM
Geometry
- Grade
- 1.46
- Grade Unit
- %
- Intercept
- 1 m
- From
- 5 m
- To
- 6 m
- Hole Depth
- 202 m
- Intercept Depth
- 4 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- 26CBRC_083:5-6
- Mining Method
- open_pit
Location
- Location
- North Zone
- Easting
- 547783
- Northing
- 6445120
- Elevation
- 234 m
- Azimuth
- 145 °
- Dip
- -60 °
- Loc. Confidence
- high
- Loc. Source
- document
Deleterious
- Deleterious Flag
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-10-20T00:00:00.000Z
Reasoning: A strong copper sub-intercept from Copper Blow.
Positive factors
- Strong grade
Negative factors
- Apparent Width Only
- No QA/QC Disclosure
Evidence · table
“1.46”
Context: 1
Tags used in scoring
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Rejected tags
Rejected tags — excluded from scoring because their label or evidence could not be verified.
Apparent Width OnlyRejected · negative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Reason: The interval is given as downhole width with no true width or drill orientation.
Evidence · table
“1”
Context: 1
No QA/QC DisclosureRejected · negative
Release does not disclose QA/QC — lab certification, CP/QP sign-off and assay protocols cannot be checked from this document.
Reason: The release does not disclose QA/QC procedures, lab certification, or CP/QP sign-off.
Evidence · text
“Kingfisher Mining Limited (ASX:KFM) (“Kingfisher” or the “Company”) is pleased to present the quarterly activities report for the period ending 30 September 2026.”
26CBRC_083Copper Blow · copperGrade: 1.99Grade Unit: %Intercept: 3 mView all detailsHide details
Identity
- Hole ID
- 26CBRC_083
- Project
- Copper Blow
- Commodity
- copper
- Region
- australia_nsw
- Reported Region
- australia_nsw
- Ticker
- KFM
Geometry
- Grade
- 1.99
- Grade Unit
- %
- Intercept
- 3 m
- From
- 146 m
- To
- 149 m
- Hole Depth
- 202 m
- Intercept Depth
- 4 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- 26CBRC_083:146-149
- Mining Method
- open_pit
Location
- Location
- North Zone
- Easting
- 547783
- Northing
- 6445120
- Elevation
- 234 m
- Azimuth
- 145 °
- Dip
- -60 °
- Loc. Confidence
- high
- Loc. Source
- document
Deleterious
- Deleterious Flag
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-10-20T00:00:00.000Z
Reasoning: A strong copper intercept from Copper Blow.
Positive factors
- Strong grade
Negative factors
- Apparent Width Only
- No QA/QC Disclosure
Evidence · table
“1.99”
Context: 3
Tags used in scoring
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Rejected tags
Rejected tags — excluded from scoring because their label or evidence could not be verified.
Apparent Width OnlyRejected · negative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Reason: The interval is given as downhole width with no true width or drill orientation.
Evidence · table
“3”
Context: 3
No QA/QC DisclosureRejected · negative
Release does not disclose QA/QC — lab certification, CP/QP sign-off and assay protocols cannot be checked from this document.
Reason: The release does not disclose QA/QC procedures, lab certification, or CP/QP sign-off.
Evidence · text
“Kingfisher Mining Limited (ASX:KFM) (“Kingfisher” or the “Company”) is pleased to present the quarterly activities report for the period ending 30 September 2026.”
26CBRC_083Copper Blow · copperGrade: 5.2Grade Unit: %Intercept: 1 mView all detailsHide details
Identity
- Hole ID
- 26CBRC_083
- Project
- Copper Blow
- Commodity
- copper
- Region
- australia_nsw
- Reported Region
- australia_nsw
- Ticker
- KFM
Geometry
- Grade
- 5.2
- Grade Unit
- %
- Intercept
- 1 m
- From
- 146 m
- To
- 147 m
- Hole Depth
- 202 m
- Intercept Depth
- 4 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- 26CBRC_083:146-147
- Mining Method
- open_pit
Location
- Location
- North Zone
- Easting
- 547783
- Northing
- 6445120
- Elevation
- 234 m
- Azimuth
- 145 °
- Dip
- -60 °
- Loc. Confidence
- high
- Loc. Source
- document
Deleterious
- Deleterious Flag
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-10-20T00:00:00.000Z
Reasoning: An exceptional copper sub-intercept from Copper Blow.
Positive factors
- Bonanza Intercept
- Exceptional grade
Negative factors
- Apparent Width Only
- No QA/QC Disclosure
Evidence · table
“5.20”
Context: 1
Tags used in scoring
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Rejected tags
Rejected tags — excluded from scoring because their label or evidence could not be verified.
Bonanza InterceptRejected · positive
Exceptionally high-grade zone, well above the deposit-type norm.
Reason: The copper grade of 5.20% is exceptionally high for a porphyry deposit.
Evidence · table
“5.20”
Context: 1
Apparent Width OnlyRejected · negative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Reason: The interval is given as downhole width with no true width or drill orientation.
Evidence · table
“1”
Context: 1
No QA/QC DisclosureRejected · negative
Release does not disclose QA/QC — lab certification, CP/QP sign-off and assay protocols cannot be checked from this document.
Reason: The release does not disclose QA/QC procedures, lab certification, or CP/QP sign-off.
Evidence · text
“Kingfisher Mining Limited (ASX:KFM) (“Kingfisher” or the “Company”) is pleased to present the quarterly activities report for the period ending 30 September 2026.”
26CBRC_084Copper Blow · copperGrade: 0.73Grade Unit: %Intercept: 1 mView all detailsHide details
Identity
- Hole ID
- 26CBRC_084
- Project
- Copper Blow
- Commodity
- copper
- Region
- australia_nsw
- Reported Region
- australia_nsw
- Ticker
- KFM
Geometry
- Grade
- 0.73
- Grade Unit
- %
- Intercept
- 1 m
- From
- 62 m
- To
- 63 m
- Hole Depth
- 154 m
- Intercept Depth
- 62 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- 26CBRC_084:62-63
- Mining Method
- open_pit
Location
- Location
- North Zone
- Easting
- 547774
- Northing
- 6445076
- Elevation
- 234 m
- Azimuth
- 326 °
- Dip
- -59 °
- Loc. Confidence
- high
- Loc. Source
- document
Deleterious
- Deleterious Flag
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-10-20T00:00:00.000Z
Reasoning: A moderate copper intercept from Copper Blow.
Positive factors
- Moderate grade
Negative factors
- Apparent Width Only
- No QA/QC Disclosure
Evidence · table
“0.73”
Context: 1
Tags used in scoring
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Rejected tags
Rejected tags — excluded from scoring because their label or evidence could not be verified.
Apparent Width OnlyRejected · negative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Reason: The interval is given as downhole width with no true width or drill orientation.
Evidence · table
“1”
Context: 1
No QA/QC DisclosureRejected · negative
Release does not disclose QA/QC — lab certification, CP/QP sign-off and assay protocols cannot be checked from this document.
Reason: The release does not disclose QA/QC procedures, lab certification, or CP/QP sign-off.
Evidence · text
“Kingfisher Mining Limited (ASX:KFM) (“Kingfisher” or the “Company”) is pleased to present the quarterly activities report for the period ending 30 September 2026.”
26CBRC_084Copper Blow · copperGrade: 0.73Grade Unit: %Intercept: 1 mView all detailsHide details
Identity
- Hole ID
- 26CBRC_084
- Project
- Copper Blow
- Commodity
- copper
- Region
- australia_nsw
- Reported Region
- australia_nsw
- Ticker
- KFM
Geometry
- Grade
- 0.73
- Grade Unit
- %
- Intercept
- 1 m
- From
- 88 m
- To
- 89 m
- Hole Depth
- 154 m
- Intercept Depth
- 62 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- 26CBRC_084:88-89
- Mining Method
- open_pit
Location
- Location
- North Zone
- Easting
- 547774
- Northing
- 6445076
- Elevation
- 234 m
- Azimuth
- 326 °
- Dip
- -59 °
- Loc. Confidence
- high
- Loc. Source
- document
Deleterious
- Deleterious Flag
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-10-20T00:00:00.000Z
Reasoning: A moderate copper intercept from Copper Blow.
Positive factors
- Moderate grade
Negative factors
- Apparent Width Only
- No QA/QC Disclosure
Evidence · table
“0.73”
Context: 1
Tags used in scoring
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Rejected tags
Rejected tags — excluded from scoring because their label or evidence could not be verified.
Apparent Width OnlyRejected · negative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Reason: The interval is given as downhole width with no true width or drill orientation.
Evidence · table
“1”
Context: 1
No QA/QC DisclosureRejected · negative
Release does not disclose QA/QC — lab certification, CP/QP sign-off and assay protocols cannot be checked from this document.
Reason: The release does not disclose QA/QC procedures, lab certification, or CP/QP sign-off.
Evidence · text
“Kingfisher Mining Limited (ASX:KFM) (“Kingfisher” or the “Company”) is pleased to present the quarterly activities report for the period ending 30 September 2026.”
26CBRC_085Copper Blow · copperGrade: 0.61Grade Unit: %Intercept: 2 mView all detailsHide details
Identity
- Hole ID
- 26CBRC_085
- Project
- Copper Blow
- Commodity
- copper
- Region
- australia_nsw
- Reported Region
- australia_nsw
- Ticker
- KFM
Geometry
- Grade
- 0.61
- Grade Unit
- %
- Intercept
- 2 m
- From
- 134 m
- To
- 136 m
- Hole Depth
- 220 m
- Intercept Depth
- 134 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- 26CBRC_085:134-136
- Mining Method
- open_pit
Location
- Location
- North Zone
- Easting
- 547583
- Northing
- 6445017
- Elevation
- 236 m
- Azimuth
- 144 °
- Dip
- -58 °
- Loc. Confidence
- high
- Loc. Source
- document
Deleterious
- Deleterious Flag
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-10-20T00:00:00.000Z
Reasoning: A moderate copper intercept from Copper Blow.
Positive factors
- Moderate grade
Negative factors
- Apparent Width Only
- No QA/QC Disclosure
Evidence · table
“0.61”
Context: 2
Tags used in scoring
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Rejected tags
Rejected tags — excluded from scoring because their label or evidence could not be verified.
Apparent Width OnlyRejected · negative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Reason: The interval is given as downhole width with no true width or drill orientation.
Evidence · table
“2”
Context: 2
No QA/QC DisclosureRejected · negative
Release does not disclose QA/QC — lab certification, CP/QP sign-off and assay protocols cannot be checked from this document.
Reason: The release does not disclose QA/QC procedures, lab certification, or CP/QP sign-off.
Evidence · text
“Kingfisher Mining Limited (ASX:KFM) (“Kingfisher” or the “Company”) is pleased to present the quarterly activities report for the period ending 30 September 2026.”
26CBRC_085Copper Blow · copperGrade: 1.46Grade Unit: %Intercept: 2 mView all detailsHide details
Identity
- Hole ID
- 26CBRC_085
- Project
- Copper Blow
- Commodity
- copper
- Region
- australia_nsw
- Reported Region
- australia_nsw
- Ticker
- KFM
Geometry
- Grade
- 1.46
- Grade Unit
- %
- Intercept
- 2 m
- From
- 140 m
- To
- 142 m
- Hole Depth
- 220 m
- Intercept Depth
- 134 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- 26CBRC_085:140-142
- Mining Method
- open_pit
Location
- Location
- North Zone
- Easting
- 547583
- Northing
- 6445017
- Elevation
- 236 m
- Azimuth
- 144 °
- Dip
- -58 °
- Loc. Confidence
- high
- Loc. Source
- document
Deleterious
- Deleterious Flag
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-10-20T00:00:00.000Z
Reasoning: A strong copper intercept from Copper Blow.
Positive factors
- Strong grade
Negative factors
- Apparent Width Only
- No QA/QC Disclosure
Evidence · table
“1.46”
Context: 2
Tags used in scoring
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Rejected tags
Rejected tags — excluded from scoring because their label or evidence could not be verified.
Apparent Width OnlyRejected · negative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Reason: The interval is given as downhole width with no true width or drill orientation.
Evidence · table
“2”
Context: 2
No QA/QC DisclosureRejected · negative
Release does not disclose QA/QC — lab certification, CP/QP sign-off and assay protocols cannot be checked from this document.
Reason: The release does not disclose QA/QC procedures, lab certification, or CP/QP sign-off.
Evidence · text
“Kingfisher Mining Limited (ASX:KFM) (“Kingfisher” or the “Company”) is pleased to present the quarterly activities report for the period ending 30 September 2026.”
26CBRC_085Copper Blow · copperGrade: 2.23Grade Unit: %Intercept: 1 mView all detailsHide details
Identity
- Hole ID
- 26CBRC_085
- Project
- Copper Blow
- Commodity
- copper
- Region
- australia_nsw
- Reported Region
- australia_nsw
- Ticker
- KFM
Geometry
- Grade
- 2.23
- Grade Unit
- %
- Intercept
- 1 m
- From
- 141 m
- To
- 142 m
- Hole Depth
- 220 m
- Intercept Depth
- 134 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- 26CBRC_085:141-142
- Mining Method
- open_pit
Location
- Location
- North Zone
- Easting
- 547583
- Northing
- 6445017
- Elevation
- 236 m
- Azimuth
- 144 °
- Dip
- -58 °
- Loc. Confidence
- high
- Loc. Source
- document
Deleterious
- Deleterious Flag
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-10-20T00:00:00.000Z
Reasoning: A strong copper sub-intercept from Copper Blow.
Positive factors
- Strong grade
Negative factors
- Apparent Width Only
- No QA/QC Disclosure
Evidence · table
“2.23”
Context: 1
Tags used in scoring
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Rejected tags
Rejected tags — excluded from scoring because their label or evidence could not be verified.
Apparent Width OnlyRejected · negative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Reason: The interval is given as downhole width with no true width or drill orientation.
Evidence · table
“1”
Context: 1
No QA/QC DisclosureRejected · negative
Release does not disclose QA/QC — lab certification, CP/QP sign-off and assay protocols cannot be checked from this document.
Reason: The release does not disclose QA/QC procedures, lab certification, or CP/QP sign-off.
Evidence · text
“Kingfisher Mining Limited (ASX:KFM) (“Kingfisher” or the “Company”) is pleased to present the quarterly activities report for the period ending 30 September 2026.”
26CBRC_086Copper Blow · copperGrade: 0.43Grade Unit: %Intercept: 8 mView all detailsHide details
Identity
- Hole ID
- 26CBRC_086
- Project
- Copper Blow
- Commodity
- copper
- Region
- australia_nsw
- Reported Region
- australia_nsw
- Ticker
- KFM
Geometry
- Grade
- 0.43
- Grade Unit
- %
- Intercept
- 8 m
- From
- 120 m
- To
- 128 m
- Hole Depth
- 172 m
- Intercept Depth
- 120 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- 26CBRC_086:120-128
- Mining Method
- open_pit
Location
- Location
- North Zone
- Easting
- 547803
- Northing
- 6445232
- Elevation
- 234 m
- Azimuth
- 144 °
- Dip
- -60 °
- Loc. Confidence
- high
- Loc. Source
- document
Deleterious
- Deleterious Flag
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-10-20T00:00:00.000Z
Reasoning: A moderate copper intercept from Copper Blow.
Positive factors
- Moderate grade
- Moderate width
Negative factors
- Apparent Width Only
- No QA/QC Disclosure
Evidence · table
“0.43”
Context: 8
Tags used in scoring
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Rejected tags
Rejected tags — excluded from scoring because their label or evidence could not be verified.
Apparent Width OnlyRejected · negative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Reason: The interval is given as downhole width with no true width or drill orientation.
Evidence · table
“8”
Context: 8
No QA/QC DisclosureRejected · negative
Release does not disclose QA/QC — lab certification, CP/QP sign-off and assay protocols cannot be checked from this document.
Reason: The release does not disclose QA/QC procedures, lab certification, or CP/QP sign-off.
Evidence · text
“Kingfisher Mining Limited (ASX:KFM) (“Kingfisher” or the “Company”) is pleased to present the quarterly activities report for the period ending 30 September 2026.”
26CBRC_086Copper Blow · copperGrade: 1.73Grade Unit: %Intercept: 1 mView all detailsHide details
Identity
- Hole ID
- 26CBRC_086
- Project
- Copper Blow
- Commodity
- copper
- Region
- australia_nsw
- Reported Region
- australia_nsw
- Ticker
- KFM
Geometry
- Grade
- 1.73
- Grade Unit
- %
- Intercept
- 1 m
- From
- 126 m
- To
- 127 m
- Hole Depth
- 172 m
- Intercept Depth
- 120 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- 26CBRC_086:126-127
- Mining Method
- open_pit
Location
- Location
- North Zone
- Easting
- 547803
- Northing
- 6445232
- Elevation
- 234 m
- Azimuth
- 144 °
- Dip
- -60 °
- Loc. Confidence
- high
- Loc. Source
- document
Deleterious
- Deleterious Flag
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-10-20T00:00:00.000Z
Reasoning: A strong copper sub-intercept from Copper Blow.
Positive factors
- Strong grade
Negative factors
- Apparent Width Only
- No QA/QC Disclosure
Evidence · table
“1.73”
Context: 1
Tags used in scoring
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Rejected tags
Rejected tags — excluded from scoring because their label or evidence could not be verified.
Apparent Width OnlyRejected · negative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Reason: The interval is given as downhole width with no true width or drill orientation.
Evidence · table
“1”
Context: 1
No QA/QC DisclosureRejected · negative
Release does not disclose QA/QC — lab certification, CP/QP sign-off and assay protocols cannot be checked from this document.
Reason: The release does not disclose QA/QC procedures, lab certification, or CP/QP sign-off.
Evidence · text
“Kingfisher Mining Limited (ASX:KFM) (“Kingfisher” or the “Company”) is pleased to present the quarterly activities report for the period ending 30 September 2026.”
26CBRC_087Copper Blow · copperGrade: 0.62Grade Unit: %Intercept: 5 mView all detailsHide details
Identity
- Hole ID
- 26CBRC_087
- Project
- Copper Blow
- Commodity
- copper
- Region
- australia_nsw
- Reported Region
- australia_nsw
- Ticker
- KFM
Geometry
- Grade
- 0.62
- Grade Unit
- %
- Intercept
- 5 m
- From
- 59 m
- To
- 64 m
- Hole Depth
- 76 m
- Intercept Depth
- 59 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- 26CBRC_087:59-64
- Mining Method
- open_pit
Location
- Location
- North Zone
- Easting
- 548103
- Northing
- 6445375
- Elevation
- 235 m
- Azimuth
- 139 °
- Dip
- -58 °
- Loc. Confidence
- high
- Loc. Source
- document
Deleterious
- Deleterious Flag
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-10-20T00:00:00.000Z
Reasoning: A moderate copper intercept from Copper Blow.
Positive factors
- Moderate grade
- Moderate width
Negative factors
- Apparent Width Only
- No QA/QC Disclosure
Evidence · table
“0.62”
Context: 5
Tags used in scoring
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Rejected tags
Rejected tags — excluded from scoring because their label or evidence could not be verified.
Apparent Width OnlyRejected · negative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Reason: The interval is given as downhole width with no true width or drill orientation.
Evidence · table
“5”
Context: 5
No QA/QC DisclosureRejected · negative
Release does not disclose QA/QC — lab certification, CP/QP sign-off and assay protocols cannot be checked from this document.
Reason: The release does not disclose QA/QC procedures, lab certification, or CP/QP sign-off.
Evidence · text
“Kingfisher Mining Limited (ASX:KFM) (“Kingfisher” or the “Company”) is pleased to present the quarterly activities report for the period ending 30 September 2026.”
26CBRC_087Copper Blow · copperGrade: 1.25Grade Unit: %Intercept: 2 mView all detailsHide details
Identity
- Hole ID
- 26CBRC_087
- Project
- Copper Blow
- Commodity
- copper
- Region
- australia_nsw
- Reported Region
- australia_nsw
- Ticker
- KFM
Geometry
- Grade
- 1.25
- Grade Unit
- %
- Intercept
- 2 m
- From
- 61 m
- To
- 63 m
- Hole Depth
- 76 m
- Intercept Depth
- 59 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- 26CBRC_087:61-63
- Mining Method
- open_pit
Location
- Location
- North Zone
- Easting
- 548103
- Northing
- 6445375
- Elevation
- 235 m
- Azimuth
- 139 °
- Dip
- -58 °
- Loc. Confidence
- high
- Loc. Source
- document
Deleterious
- Deleterious Flag
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-10-20T00:00:00.000Z
Reasoning: A strong copper sub-intercept from Copper Blow.
Positive factors
- Strong grade
Negative factors
- Apparent Width Only
- No QA/QC Disclosure
Evidence · table
“1.25”
Context: 2
Tags used in scoring
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Rejected tags
Rejected tags — excluded from scoring because their label or evidence could not be verified.
Apparent Width OnlyRejected · negative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Reason: The interval is given as downhole width with no true width or drill orientation.
Evidence · table
“2”
Context: 2
No QA/QC DisclosureRejected · negative
Release does not disclose QA/QC — lab certification, CP/QP sign-off and assay protocols cannot be checked from this document.
Reason: The release does not disclose QA/QC procedures, lab certification, or CP/QP sign-off.
Evidence · text
“Kingfisher Mining Limited (ASX:KFM) (“Kingfisher” or the “Company”) is pleased to present the quarterly activities report for the period ending 30 September 2026.”
26CBRC_088Copper Blow · copperGrade: 1.02Grade Unit: %Intercept: 1 mView all detailsHide details
Identity
- Hole ID
- 26CBRC_088
- Project
- Copper Blow
- Commodity
- copper
- Region
- australia_nsw
- Reported Region
- australia_nsw
- Ticker
- KFM
Geometry
- Grade
- 1.02
- Grade Unit
- %
- Intercept
- 1 m
- From
- 10 m
- To
- 11 m
- Hole Depth
- 76 m
- Intercept Depth
- 10 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- 26CBRC_088:10-11
- Mining Method
- open_pit
Location
- Location
- North Zone
- Easting
- 547846
- Northing
- 6445170
- Elevation
- 236 m
- Azimuth
- 142 °
- Dip
- -60 °
- Loc. Confidence
- high
- Loc. Source
- document
Deleterious
- Deleterious Flag
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-10-20T00:00:00.000Z
Reasoning: A strong copper intercept from Copper Blow.
Positive factors
- Strong grade
Negative factors
- Apparent Width Only
- No QA/QC Disclosure
Evidence · table
“1.02”
Context: 1
Tags used in scoring
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Rejected tags
Rejected tags — excluded from scoring because their label or evidence could not be verified.
Apparent Width OnlyRejected · negative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Reason: The interval is given as downhole width with no true width or drill orientation.
Evidence · table
“1”
Context: 1
No QA/QC DisclosureRejected · negative
Release does not disclose QA/QC — lab certification, CP/QP sign-off and assay protocols cannot be checked from this document.
Reason: The release does not disclose QA/QC procedures, lab certification, or CP/QP sign-off.
Evidence · text
“Kingfisher Mining Limited (ASX:KFM) (“Kingfisher” or the “Company”) is pleased to present the quarterly activities report for the period ending 30 September 2026.”
26STRC_018Stephens Trig · leadGrade: 9116Grade Unit: ppmIntercept: 4 mView all detailsHide details
Identity
- Hole ID
- 26STRC_018
- Project
- Stephens Trig
- Commodity
- lead
- Region
- australia_nsw
- Reported Region
- australia_nsw
- Ticker
- KFM
Geometry
- Grade
- 9116
- Grade Unit
- ppm
- Intercept
- 4 m
- From
- 67 m
- To
- 71 m
- Hole Depth
- 136 m
- Intercept Depth
- 67 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- 26STRC_018:67-71
- Mining Method
- open_pit
Location
- Location
- North Zone
- Easting
- 545428
- Northing
- 6478733
- Elevation
- 259 m
- Azimuth
- 120 °
- Dip
- -60 °
- Loc. Confidence
- high
- Loc. Source
- document
Deleterious
- Deleterious Flag
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-10-20T00:00:00.000Z
Reasoning: A moderate lead intercept from the maiden drilling program at Stephens Trig, confirming significant mineralisation.
Positive factors
- Moderate grade
- Maiden Resource
- Infill Drilling
Negative factors
- Apparent Width Only
- No QA/QC Disclosure
Evidence · table
“9116”
Context: 4
Tags used in scoring
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Rejected tags
Rejected tags — excluded from scoring because their label or evidence could not be verified.
Maiden ResourceRejected · neutral · Story-specific tag
First formal MRE for the project — establishes baseline but typically exploration-stage with high Inferred component.
Reason: The intercept is from the company's maiden drilling program at Stephens Trig.
Evidence · text
“maiden reverse circulation (RC) drilling program at Stephens Trig”
Infill DrillingRejected · neutral
Confirmatory drilling to raise resource confidence, not new discovery.
Reason: The drilling program 'successfully validated historical mineralisation'.
Evidence · text
“successfully validated historical mineralisation”
Apparent Width OnlyRejected · negative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Reason: The interval is given as downhole width with no true width or drill orientation.
Evidence · table
“4”
Context: 4
No QA/QC DisclosureRejected · negative
Release does not disclose QA/QC — lab certification, CP/QP sign-off and assay protocols cannot be checked from this document.
Reason: The release does not disclose QA/QC procedures, lab certification, or CP/QP sign-off.
Evidence · text
“Kingfisher Mining Limited (ASX:KFM) (“Kingfisher” or the “Company”) is pleased to present the quarterly activities report for the period ending 30 September 2026.”
26STRC_018Stephens Trig · leadGrade: 1559Grade Unit: ppmIntercept: 1 mView all detailsHide details
Identity
- Hole ID
- 26STRC_018
- Project
- Stephens Trig
- Commodity
- lead
- Region
- australia_nsw
- Reported Region
- australia_nsw
- Ticker
- KFM
Geometry
- Grade
- 1559
- Grade Unit
- ppm
- Intercept
- 1 m
- From
- 67 m
- To
- 68 m
- Hole Depth
- 136 m
- Intercept Depth
- 67 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- 26STRC_018:67-68
- Mining Method
- open_pit
Location
- Location
- North Zone
- Easting
- 545428
- Northing
- 6478733
- Elevation
- 259 m
- Azimuth
- 120 °
- Dip
- -60 °
- Loc. Confidence
- high
- Loc. Source
- document
Deleterious
- Deleterious Flag
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-10-20T00:00:00.000Z
Reasoning: A weak lead sub-intercept from the maiden drilling program at Stephens Trig, confirming significant mineralisation.
Positive factors
- Weak grade
- Maiden Resource
- Infill Drilling
Negative factors
- Apparent Width Only
- No QA/QC Disclosure
Evidence · table
“1559”
Context: 1
Tags used in scoring
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Rejected tags
Rejected tags — excluded from scoring because their label or evidence could not be verified.
Maiden ResourceRejected · neutral · Story-specific tag
First formal MRE for the project — establishes baseline but typically exploration-stage with high Inferred component.
Reason: The intercept is from the company's maiden drilling program at Stephens Trig.
Evidence · text
“maiden reverse circulation (RC) drilling program at Stephens Trig”
Infill DrillingRejected · neutral
Confirmatory drilling to raise resource confidence, not new discovery.
Reason: The drilling program 'successfully validated historical mineralisation'.
Evidence · text
“successfully validated historical mineralisation”
Apparent Width OnlyRejected · negative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Reason: The interval is given as downhole width with no true width or drill orientation.
Evidence · table
“1”
Context: 1
No QA/QC DisclosureRejected · negative
Release does not disclose QA/QC — lab certification, CP/QP sign-off and assay protocols cannot be checked from this document.
Reason: The release does not disclose QA/QC procedures, lab certification, or CP/QP sign-off.
Evidence · text
“Kingfisher Mining Limited (ASX:KFM) (“Kingfisher” or the “Company”) is pleased to present the quarterly activities report for the period ending 30 September 2026.”
26STRC_018Stephens Trig · leadGrade: 34043Grade Unit: ppmIntercept: 1 mView all detailsHide details
Identity
- Hole ID
- 26STRC_018
- Project
- Stephens Trig
- Commodity
- lead
- Region
- australia_nsw
- Reported Region
- australia_nsw
- Ticker
- KFM
Geometry
- Grade
- 34043
- Grade Unit
- ppm
- Intercept
- 1 m
- From
- 70 m
- To
- 71 m
- Hole Depth
- 136 m
- Intercept Depth
- 67 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- 26STRC_018:70-71
- Mining Method
- open_pit
Location
- Location
- North Zone
- Easting
- 545428
- Northing
- 6478733
- Elevation
- 259 m
- Azimuth
- 120 °
- Dip
- -60 °
- Loc. Confidence
- high
- Loc. Source
- document
Deleterious
- Deleterious Flag
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-10-20T00:00:00.000Z
Reasoning: An exceptional lead sub-intercept from the maiden drilling program at Stephens Trig, confirming significant mineralisation.
Positive factors
- Bonanza Intercept
- Exceptional grade
- Maiden Resource
- Infill Drilling
Negative factors
- Apparent Width Only
- No QA/QC Disclosure
Evidence · table
“34043”
Context: 1
Tags used in scoring
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Rejected tags
Rejected tags — excluded from scoring because their label or evidence could not be verified.
Bonanza InterceptRejected · positive
Exceptionally high-grade zone, well above the deposit-type norm.
Reason: The lead grade of 34043 ppm (3.4%) is exceptional for a Sedex deposit.
Evidence · table
“34043”
Context: 1
Maiden ResourceRejected · neutral · Story-specific tag
First formal MRE for the project — establishes baseline but typically exploration-stage with high Inferred component.
Reason: The intercept is from the company's maiden drilling program at Stephens Trig.
Evidence · text
“maiden reverse circulation (RC) drilling program at Stephens Trig”
Infill DrillingRejected · neutral
Confirmatory drilling to raise resource confidence, not new discovery.
Reason: The drilling program 'successfully validated historical mineralisation'.
Evidence · text
“successfully validated historical mineralisation”
Apparent Width OnlyRejected · negative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Reason: The interval is given as downhole width with no true width or drill orientation.
Evidence · table
“1”
Context: 1
No QA/QC DisclosureRejected · negative
Release does not disclose QA/QC — lab certification, CP/QP sign-off and assay protocols cannot be checked from this document.
Reason: The release does not disclose QA/QC procedures, lab certification, or CP/QP sign-off.
Evidence · text
“Kingfisher Mining Limited (ASX:KFM) (“Kingfisher” or the “Company”) is pleased to present the quarterly activities report for the period ending 30 September 2026.”
26STRC_018Stephens Trig · leadGrade: 11597Grade Unit: ppmIntercept: 5 mView all detailsHide details
Identity
- Hole ID
- 26STRC_018
- Project
- Stephens Trig
- Commodity
- lead
- Region
- australia_nsw
- Reported Region
- australia_nsw
- Ticker
- KFM
Geometry
- Grade
- 11597
- Grade Unit
- ppm
- Intercept
- 5 m
- From
- 79 m
- To
- 84 m
- Hole Depth
- 136 m
- Intercept Depth
- 67 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- 26STRC_018:79-84
- Mining Method
- open_pit
Location
- Location
- North Zone
- Easting
- 545428
- Northing
- 6478733
- Elevation
- 259 m
- Azimuth
- 120 °
- Dip
- -60 °
- Loc. Confidence
- high
- Loc. Source
- document
Deleterious
- Deleterious Flag
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-10-20T00:00:00.000Z
Reasoning: A strong lead intercept from the maiden drilling program at Stephens Trig, confirming significant mineralisation.
Positive factors
- Strong grade
- Moderate width
- Maiden Resource
- Infill Drilling
Negative factors
- Apparent Width Only
- No QA/QC Disclosure
Evidence · table
“11597”
Context: 5
Tags used in scoring
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Rejected tags
Rejected tags — excluded from scoring because their label or evidence could not be verified.
Maiden ResourceRejected · neutral · Story-specific tag
First formal MRE for the project — establishes baseline but typically exploration-stage with high Inferred component.
Reason: The intercept is from the company's maiden drilling program at Stephens Trig.
Evidence · text
“maiden reverse circulation (RC) drilling program at Stephens Trig”
Infill DrillingRejected · neutral
Confirmatory drilling to raise resource confidence, not new discovery.
Reason: The drilling program 'successfully validated historical mineralisation'.
Evidence · text
“successfully validated historical mineralisation”
Apparent Width OnlyRejected · negative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Reason: The interval is given as downhole width with no true width or drill orientation.
Evidence · table
“5”
Context: 5
No QA/QC DisclosureRejected · negative
Release does not disclose QA/QC — lab certification, CP/QP sign-off and assay protocols cannot be checked from this document.
Reason: The release does not disclose QA/QC procedures, lab certification, or CP/QP sign-off.
Evidence · text
“Kingfisher Mining Limited (ASX:KFM) (“Kingfisher” or the “Company”) is pleased to present the quarterly activities report for the period ending 30 September 2026.”
26STRC_018Stephens Trig · leadGrade: 27456Grade Unit: ppmIntercept: 2 mView all detailsHide details
Identity
- Hole ID
- 26STRC_018
- Project
- Stephens Trig
- Commodity
- lead
- Region
- australia_nsw
- Reported Region
- australia_nsw
- Ticker
- KFM
Geometry
- Grade
- 27456
- Grade Unit
- ppm
- Intercept
- 2 m
- From
- 79 m
- To
- 81 m
- Hole Depth
- 136 m
- Intercept Depth
- 67 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- 26STRC_018:79-81
- Mining Method
- open_pit
Location
- Location
- North Zone
- Easting
- 545428
- Northing
- 6478733
- Elevation
- 259 m
- Azimuth
- 120 °
- Dip
- -60 °
- Loc. Confidence
- high
- Loc. Source
- document
Deleterious
- Deleterious Flag
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-10-20T00:00:00.000Z
Reasoning: An exceptional lead sub-intercept from the maiden drilling program at Stephens Trig, confirming significant mineralisation.
Positive factors
- Bonanza Intercept
- Exceptional grade
- Maiden Resource
- Infill Drilling
Negative factors
- Apparent Width Only
- No QA/QC Disclosure
Evidence · table
“27456”
Context: 2
Tags used in scoring
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Rejected tags
Rejected tags — excluded from scoring because their label or evidence could not be verified.
Bonanza InterceptRejected · positive
Exceptionally high-grade zone, well above the deposit-type norm.
Reason: The lead grade of 27456 ppm (2.7%) is exceptional for a Sedex deposit.
Evidence · table
“27456”
Context: 2
Maiden ResourceRejected · neutral · Story-specific tag
First formal MRE for the project — establishes baseline but typically exploration-stage with high Inferred component.
Reason: The intercept is from the company's maiden drilling program at Stephens Trig.
Evidence · text
“maiden reverse circulation (RC) drilling program at Stephens Trig”
Infill DrillingRejected · neutral
Confirmatory drilling to raise resource confidence, not new discovery.
Reason: The drilling program 'successfully validated historical mineralisation'.
Evidence · text
“successfully validated historical mineralisation”
Apparent Width OnlyRejected · negative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Reason: The interval is given as downhole width with no true width or drill orientation.
Evidence · table
“2”
Context: 2
No QA/QC DisclosureRejected · negative
Release does not disclose QA/QC — lab certification, CP/QP sign-off and assay protocols cannot be checked from this document.
Reason: The release does not disclose QA/QC procedures, lab certification, or CP/QP sign-off.
Evidence · text
“Kingfisher Mining Limited (ASX:KFM) (“Kingfisher” or the “Company”) is pleased to present the quarterly activities report for the period ending 30 September 2026.”
26STRC_018Stephens Trig · leadGrade: 49068Grade Unit: ppmIntercept: 1 mView all detailsHide details
Identity
- Hole ID
- 26STRC_018
- Project
- Stephens Trig
- Commodity
- lead
- Region
- australia_nsw
- Reported Region
- australia_nsw
- Ticker
- KFM
Geometry
- Grade
- 49068
- Grade Unit
- ppm
- Intercept
- 1 m
- From
- 79 m
- To
- 80 m
- Hole Depth
- 136 m
- Intercept Depth
- 67 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- 26STRC_018:79-80
- Mining Method
- open_pit
Location
- Location
- North Zone
- Easting
- 545428
- Northing
- 6478733
- Elevation
- 259 m
- Azimuth
- 120 °
- Dip
- -60 °
- Loc. Confidence
- high
- Loc. Source
- document
Deleterious
- Deleterious Flag
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-10-20T00:00:00.000Z
Reasoning: An exceptional lead sub-intercept from the maiden drilling program at Stephens Trig, confirming significant mineralisation.
Positive factors
- Bonanza Intercept
- Exceptional grade
- Maiden Resource
- Infill Drilling
Negative factors
- Apparent Width Only
- No QA/QC Disclosure
Evidence · table
“49068”
Context: 1
Tags used in scoring
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Rejected tags
Rejected tags — excluded from scoring because their label or evidence could not be verified.
Bonanza InterceptRejected · positive
Exceptionally high-grade zone, well above the deposit-type norm.
Reason: The lead grade of 49068 ppm (4.9%) is exceptionally high for a Sedex deposit.
Evidence · table
“49068”
Context: 1
Maiden ResourceRejected · neutral · Story-specific tag
First formal MRE for the project — establishes baseline but typically exploration-stage with high Inferred component.
Reason: The intercept is from the company's maiden drilling program at Stephens Trig.
Evidence · text
“maiden reverse circulation (RC) drilling program at Stephens Trig”
Infill DrillingRejected · neutral
Confirmatory drilling to raise resource confidence, not new discovery.
Reason: The drilling program 'successfully validated historical mineralisation'.
Evidence · text
“successfully validated historical mineralisation”
Apparent Width OnlyRejected · negative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Reason: The interval is given as downhole width with no true width or drill orientation.
Evidence · table
“1”
Context: 1
No QA/QC DisclosureRejected · negative
Release does not disclose QA/QC — lab certification, CP/QP sign-off and assay protocols cannot be checked from this document.
Reason: The release does not disclose QA/QC procedures, lab certification, or CP/QP sign-off.
Evidence · text
“Kingfisher Mining Limited (ASX:KFM) (“Kingfisher” or the “Company”) is pleased to present the quarterly activities report for the period ending 30 September 2026.”
26STRC_018Stephens Trig · leadGrade: 208Grade Unit: ppmIntercept: 1 mView all detailsHide details
Identity
- Hole ID
- 26STRC_018
- Project
- Stephens Trig
- Commodity
- lead
- Region
- australia_nsw
- Reported Region
- australia_nsw
- Ticker
- KFM
Geometry
- Grade
- 208
- Grade Unit
- ppm
- Intercept
- 1 m
- From
- 103 m
- To
- 104 m
- Hole Depth
- 136 m
- Intercept Depth
- 67 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- 26STRC_018:103-104
- Mining Method
- open_pit
Location
- Location
- North Zone
- Easting
- 545428
- Northing
- 6478733
- Elevation
- 259 m
- Azimuth
- 120 °
- Dip
- -60 °
- Loc. Confidence
- high
- Loc. Source
- document
Deleterious
- Deleterious Flag
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-10-20T00:00:00.000Z
Reasoning: A weak lead intercept from the maiden drilling program at Stephens Trig.
Positive factors
- Maiden Resource
- Infill Drilling
Negative factors
- Weak grade
- Apparent Width Only
- No QA/QC Disclosure
Evidence · table
“208”
Context: 1
Tags used in scoring
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Rejected tags
Rejected tags — excluded from scoring because their label or evidence could not be verified.
Maiden ResourceRejected · neutral · Story-specific tag
First formal MRE for the project — establishes baseline but typically exploration-stage with high Inferred component.
Reason: The intercept is from the company's maiden drilling program at Stephens Trig.
Evidence · text
“maiden reverse circulation (RC) drilling program at Stephens Trig”
Infill DrillingRejected · neutral
Confirmatory drilling to raise resource confidence, not new discovery.
Reason: The drilling program 'successfully validated historical mineralisation'.
Evidence · text
“successfully validated historical mineralisation”
Apparent Width OnlyRejected · negative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Reason: The interval is given as downhole width with no true width or drill orientation.
Evidence · table
“1”
Context: 1
No QA/QC DisclosureRejected · negative
Release does not disclose QA/QC — lab certification, CP/QP sign-off and assay protocols cannot be checked from this document.
Reason: The release does not disclose QA/QC procedures, lab certification, or CP/QP sign-off.
Evidence · text
“Kingfisher Mining Limited (ASX:KFM) (“Kingfisher” or the “Company”) is pleased to present the quarterly activities report for the period ending 30 September 2026.”
26STRC_018Stephens Trig · leadGrade: 7681Grade Unit: ppmIntercept: 1 mView all detailsHide details
Identity
- Hole ID
- 26STRC_018
- Project
- Stephens Trig
- Commodity
- lead
- Region
- australia_nsw
- Reported Region
- australia_nsw
- Ticker
- KFM
Geometry
- Grade
- 7681
- Grade Unit
- ppm
- Intercept
- 1 m
- From
- 112 m
- To
- 113 m
- Hole Depth
- 136 m
- Intercept Depth
- 67 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- 26STRC_018:112-113
- Mining Method
- open_pit
Location
- Location
- North Zone
- Easting
- 545428
- Northing
- 6478733
- Elevation
- 259 m
- Azimuth
- 120 °
- Dip
- -60 °
- Loc. Confidence
- high
- Loc. Source
- document
Deleterious
- Deleterious Flag
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-10-20T00:00:00.000Z
Reasoning: A moderate lead intercept from the maiden drilling program at Stephens Trig, confirming significant mineralisation.
Positive factors
- Moderate grade
- Maiden Resource
- Infill Drilling
Negative factors
- Apparent Width Only
- No QA/QC Disclosure
Evidence · table
“7681”
Context: 1
Tags used in scoring
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Rejected tags
Rejected tags — excluded from scoring because their label or evidence could not be verified.
Maiden ResourceRejected · neutral · Story-specific tag
First formal MRE for the project — establishes baseline but typically exploration-stage with high Inferred component.
Reason: The intercept is from the company's maiden drilling program at Stephens Trig.
Evidence · text
“maiden reverse circulation (RC) drilling program at Stephens Trig”
Infill DrillingRejected · neutral
Confirmatory drilling to raise resource confidence, not new discovery.
Reason: The drilling program 'successfully validated historical mineralisation'.
Evidence · text
“successfully validated historical mineralisation”
Apparent Width OnlyRejected · negative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Reason: The interval is given as downhole width with no true width or drill orientation.
Evidence · table
“1”
Context: 1
No QA/QC DisclosureRejected · negative
Release does not disclose QA/QC — lab certification, CP/QP sign-off and assay protocols cannot be checked from this document.
Reason: The release does not disclose QA/QC procedures, lab certification, or CP/QP sign-off.
Evidence · text
“Kingfisher Mining Limited (ASX:KFM) (“Kingfisher” or the “Company”) is pleased to present the quarterly activities report for the period ending 30 September 2026.”
26STRC_018Stephens Trig · leadGrade: 15985Grade Unit: ppmIntercept: 2 mView all detailsHide details
Identity
- Hole ID
- 26STRC_018
- Project
- Stephens Trig
- Commodity
- lead
- Region
- australia_nsw
- Reported Region
- australia_nsw
- Ticker
- KFM
Geometry
- Grade
- 15985
- Grade Unit
- ppm
- Intercept
- 2 m
- From
- 119 m
- To
- 121 m
- Hole Depth
- 136 m
- Intercept Depth
- 67 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- 26STRC_018:119-121
- Mining Method
- open_pit
Location
- Location
- North Zone
- Easting
- 545428
- Northing
- 6478733
- Elevation
- 259 m
- Azimuth
- 120 °
- Dip
- -60 °
- Loc. Confidence
- high
- Loc. Source
- document
Deleterious
- Deleterious Flag
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-10-20T00:00:00.000Z
Reasoning: A strong lead intercept from the maiden drilling program at Stephens Trig, confirming significant mineralisation.
Positive factors
- Strong grade
- Maiden Resource
- Infill Drilling
Negative factors
- Apparent Width Only
- No QA/QC Disclosure
Evidence · table
“15985”
Context: 2
Tags used in scoring
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Rejected tags
Rejected tags — excluded from scoring because their label or evidence could not be verified.
Maiden ResourceRejected · neutral · Story-specific tag
First formal MRE for the project — establishes baseline but typically exploration-stage with high Inferred component.
Reason: The intercept is from the company's maiden drilling program at Stephens Trig.
Evidence · text
“maiden reverse circulation (RC) drilling program at Stephens Trig”
Infill DrillingRejected · neutral
Confirmatory drilling to raise resource confidence, not new discovery.
Reason: The drilling program 'successfully validated historical mineralisation'.
Evidence · text
“successfully validated historical mineralisation”
Apparent Width OnlyRejected · negative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Reason: The interval is given as downhole width with no true width or drill orientation.
Evidence · table
“2”
Context: 2
No QA/QC DisclosureRejected · negative
Release does not disclose QA/QC — lab certification, CP/QP sign-off and assay protocols cannot be checked from this document.
Reason: The release does not disclose QA/QC procedures, lab certification, or CP/QP sign-off.
Evidence · text
“Kingfisher Mining Limited (ASX:KFM) (“Kingfisher” or the “Company”) is pleased to present the quarterly activities report for the period ending 30 September 2026.”
26STRC_018Stephens Trig · leadGrade: 26665Grade Unit: ppmIntercept: 1 mView all detailsHide details
Identity
- Hole ID
- 26STRC_018
- Project
- Stephens Trig
- Commodity
- lead
- Region
- australia_nsw
- Reported Region
- australia_nsw
- Ticker
- KFM
Geometry
- Grade
- 26665
- Grade Unit
- ppm
- Intercept
- 1 m
- From
- 120 m
- To
- 121 m
- Hole Depth
- 136 m
- Intercept Depth
- 67 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- 26STRC_018:120-121
- Mining Method
- open_pit
Location
- Location
- North Zone
- Easting
- 545428
- Northing
- 6478733
- Elevation
- 259 m
- Azimuth
- 120 °
- Dip
- -60 °
- Loc. Confidence
- high
- Loc. Source
- document
Deleterious
- Deleterious Flag
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-10-20T00:00:00.000Z
Reasoning: An exceptional lead sub-intercept from the maiden drilling program at Stephens Trig, confirming significant mineralisation.
Positive factors
- Bonanza Intercept
- Exceptional grade
- Maiden Resource
- Infill Drilling
Negative factors
- Apparent Width Only
- No QA/QC Disclosure
Evidence · table
“26665”
Context: 1
Tags used in scoring
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Rejected tags
Rejected tags — excluded from scoring because their label or evidence could not be verified.
Bonanza InterceptRejected · positive
Exceptionally high-grade zone, well above the deposit-type norm.
Reason: The lead grade of 26665 ppm (2.6%) is exceptional for a Sedex deposit.
Evidence · table
“26665”
Context: 1
Maiden ResourceRejected · neutral · Story-specific tag
First formal MRE for the project — establishes baseline but typically exploration-stage with high Inferred component.
Reason: The intercept is from the company's maiden drilling program at Stephens Trig.
Evidence · text
“maiden reverse circulation (RC) drilling program at Stephens Trig”
Infill DrillingRejected · neutral
Confirmatory drilling to raise resource confidence, not new discovery.
Reason: The drilling program 'successfully validated historical mineralisation'.
Evidence · text
“successfully validated historical mineralisation”
Apparent Width OnlyRejected · negative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Reason: The interval is given as downhole width with no true width or drill orientation.
Evidence · table
“1”
Context: 1
No QA/QC DisclosureRejected · negative
Release does not disclose QA/QC — lab certification, CP/QP sign-off and assay protocols cannot be checked from this document.
Reason: The release does not disclose QA/QC procedures, lab certification, or CP/QP sign-off.
Evidence · text
“Kingfisher Mining Limited (ASX:KFM) (“Kingfisher” or the “Company”) is pleased to present the quarterly activities report for the period ending 30 September 2026.”
26STRC_019Stephens Trig · leadGrade: 3145Grade Unit: ppmIntercept: 4 mView all detailsHide details
Identity
- Hole ID
- 26STRC_019
- Project
- Stephens Trig
- Commodity
- lead
- Region
- australia_nsw
- Reported Region
- australia_nsw
- Ticker
- KFM
Geometry
- Grade
- 3145
- Grade Unit
- ppm
- Intercept
- 4 m
- From
- 82 m
- To
- 86 m
- Hole Depth
- 154 m
- Intercept Depth
- 82 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- 26STRC_019:82-86
- Mining Method
- open_pit
Location
- Location
- North Zone
- Easting
- 545515
- Northing
- 6478774
- Elevation
- 258 m
- Azimuth
- 120 °
- Dip
- -60 °
- Loc. Confidence
- high
- Loc. Source
- document
Deleterious
- Deleterious Flag
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-10-20T00:00:00.000Z
Reasoning: A moderate lead intercept from the maiden drilling program at Stephens Trig, confirming significant mineralisation.
Positive factors
- Moderate grade
- Maiden Resource
- Infill Drilling
Negative factors
- Apparent Width Only
- No QA/QC Disclosure
Evidence · table
“3145”
Context: 4
Tags used in scoring
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Rejected tags
Rejected tags — excluded from scoring because their label or evidence could not be verified.
Maiden ResourceRejected · neutral · Story-specific tag
First formal MRE for the project — establishes baseline but typically exploration-stage with high Inferred component.
Reason: The intercept is from the company's maiden drilling program at Stephens Trig.
Evidence · text
“maiden reverse circulation (RC) drilling program at Stephens Trig”
Infill DrillingRejected · neutral
Confirmatory drilling to raise resource confidence, not new discovery.
Reason: The drilling program 'successfully validated historical mineralisation'.
Evidence · text
“successfully validated historical mineralisation”
Apparent Width OnlyRejected · negative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Reason: The interval is given as downhole width with no true width or drill orientation.
Evidence · table
“4”
Context: 4
No QA/QC DisclosureRejected · negative
Release does not disclose QA/QC — lab certification, CP/QP sign-off and assay protocols cannot be checked from this document.
Reason: The release does not disclose QA/QC procedures, lab certification, or CP/QP sign-off.
Evidence · text
“Kingfisher Mining Limited (ASX:KFM) (“Kingfisher” or the “Company”) is pleased to present the quarterly activities report for the period ending 30 September 2026.”
26STRC_019Stephens Trig · leadGrade: 1279Grade Unit: ppmIntercept: 1 mView all detailsHide details
Identity
- Hole ID
- 26STRC_019
- Project
- Stephens Trig
- Commodity
- lead
- Region
- australia_nsw
- Reported Region
- australia_nsw
- Ticker
- KFM
Geometry
- Grade
- 1279
- Grade Unit
- ppm
- Intercept
- 1 m
- From
- 83 m
- To
- 84 m
- Hole Depth
- 154 m
- Intercept Depth
- 82 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- 26STRC_019:83-84
- Mining Method
- open_pit
Location
- Location
- North Zone
- Easting
- 545515
- Northing
- 6478774
- Elevation
- 258 m
- Azimuth
- 120 °
- Dip
- -60 °
- Loc. Confidence
- high
- Loc. Source
- document
Deleterious
- Deleterious Flag
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-10-20T00:00:00.000Z
Reasoning: A weak lead sub-intercept from the maiden drilling program at Stephens Trig, confirming significant mineralisation.
Positive factors
- Weak grade
- Maiden Resource
- Infill Drilling
Negative factors
- Apparent Width Only
- No QA/QC Disclosure
Evidence · table
“1279”
Context: 1
Tags used in scoring
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Rejected tags
Rejected tags — excluded from scoring because their label or evidence could not be verified.
Maiden ResourceRejected · neutral · Story-specific tag
First formal MRE for the project — establishes baseline but typically exploration-stage with high Inferred component.
Reason: The intercept is from the company's maiden drilling program at Stephens Trig.
Evidence · text
“maiden reverse circulation (RC) drilling program at Stephens Trig”
Infill DrillingRejected · neutral
Confirmatory drilling to raise resource confidence, not new discovery.
Reason: The drilling program 'successfully validated historical mineralisation'.
Evidence · text
“successfully validated historical mineralisation”
Apparent Width OnlyRejected · negative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Reason: The interval is given as downhole width with no true width or drill orientation.
Evidence · table
“1”
Context: 1
No QA/QC DisclosureRejected · negative
Release does not disclose QA/QC — lab certification, CP/QP sign-off and assay protocols cannot be checked from this document.
Reason: The release does not disclose QA/QC procedures, lab certification, or CP/QP sign-off.
Evidence · text
“Kingfisher Mining Limited (ASX:KFM) (“Kingfisher” or the “Company”) is pleased to present the quarterly activities report for the period ending 30 September 2026.”
26STRC_020Stephens Trig · leadGrade: 51832Grade Unit: ppmIntercept: 1 mView all detailsHide details
Identity
- Hole ID
- 26STRC_020
- Project
- Stephens Trig
- Commodity
- lead
- Region
- australia_nsw
- Reported Region
- australia_nsw
- Ticker
- KFM
Geometry
- Grade
- 51832
- Grade Unit
- ppm
- Intercept
- 1 m
- From
- 85 m
- To
- 86 m
- Hole Depth
- 142 m
- Intercept Depth
- 85 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- 26STRC_020:85-86
- Mining Method
- open_pit
Location
- Location
- North Zone
- Easting
- 545464
- Northing
- 6478763
- Elevation
- 259 m
- Azimuth
- 120 °
- Dip
- -60 °
- Loc. Confidence
- high
- Loc. Source
- document
Deleterious
- Deleterious Flag
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-10-20T00:00:00.000Z
Reasoning: An exceptional lead intercept from the maiden drilling program at Stephens Trig, confirming significant mineralisation.
Positive factors
- Bonanza Intercept
- Exceptional grade
- Maiden Resource
- Infill Drilling
Negative factors
- Apparent Width Only
- No QA/QC Disclosure
Evidence · table
“51832”
Context: 1
Tags used in scoring
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Rejected tags
Rejected tags — excluded from scoring because their label or evidence could not be verified.
Bonanza InterceptRejected · positive
Exceptionally high-grade zone, well above the deposit-type norm.
Reason: The lead grade of 51832 ppm (5.18%) is exceptionally high for a Sedex deposit.
Evidence · table
“51832”
Context: 1
Maiden ResourceRejected · neutral · Story-specific tag
First formal MRE for the project — establishes baseline but typically exploration-stage with high Inferred component.
Reason: The intercept is from the company's maiden drilling program at Stephens Trig.
Evidence · text
“maiden reverse circulation (RC) drilling program at Stephens Trig”
Infill DrillingRejected · neutral
Confirmatory drilling to raise resource confidence, not new discovery.
Reason: The drilling program 'successfully validated historical mineralisation'.
Evidence · text
“successfully validated historical mineralisation”
Apparent Width OnlyRejected · negative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Reason: The interval is given as downhole width with no true width or drill orientation.
Evidence · table
“1”
Context: 1
No QA/QC DisclosureRejected · negative
Release does not disclose QA/QC — lab certification, CP/QP sign-off and assay protocols cannot be checked from this document.
Reason: The release does not disclose QA/QC procedures, lab certification, or CP/QP sign-off.
Evidence · text
“Kingfisher Mining Limited (ASX:KFM) (“Kingfisher” or the “Company”) is pleased to present the quarterly activities report for the period ending 30 September 2026.”
26STRC_020Stephens Trig · leadGrade: 8930Grade Unit: ppmIntercept: 1 mView all detailsHide details
Identity
- Hole ID
- 26STRC_020
- Project
- Stephens Trig
- Commodity
- lead
- Region
- australia_nsw
- Reported Region
- australia_nsw
- Ticker
- KFM
Geometry
- Grade
- 8930
- Grade Unit
- ppm
- Intercept
- 1 m
- From
- 111 m
- To
- 112 m
- Hole Depth
- 142 m
- Intercept Depth
- 85 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- 26STRC_020:111-112
- Mining Method
- open_pit
Location
- Location
- North Zone
- Easting
- 545464
- Northing
- 6478763
- Elevation
- 259 m
- Azimuth
- 120 °
- Dip
- -60 °
- Loc. Confidence
- high
- Loc. Source
- document
Deleterious
- Deleterious Flag
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-10-20T00:00:00.000Z
Reasoning: A moderate lead intercept from the maiden drilling program at Stephens Trig, confirming significant mineralisation.
Positive factors
- Moderate grade
- Maiden Resource
- Infill Drilling
Negative factors
- Apparent Width Only
- No QA/QC Disclosure
Evidence · table
“8930”
Context: 1
Tags used in scoring
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Rejected tags
Rejected tags — excluded from scoring because their label or evidence could not be verified.
Maiden ResourceRejected · neutral · Story-specific tag
First formal MRE for the project — establishes baseline but typically exploration-stage with high Inferred component.
Reason: The intercept is from the company's maiden drilling program at Stephens Trig.
Evidence · text
“maiden reverse circulation (RC) drilling program at Stephens Trig”
Infill DrillingRejected · neutral
Confirmatory drilling to raise resource confidence, not new discovery.
Reason: The drilling program 'successfully validated historical mineralisation'.
Evidence · text
“successfully validated historical mineralisation”
Apparent Width OnlyRejected · negative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Reason: The interval is given as downhole width with no true width or drill orientation.
Evidence · table
“1”
Context: 1
No QA/QC DisclosureRejected · negative
Release does not disclose QA/QC — lab certification, CP/QP sign-off and assay protocols cannot be checked from this document.
Reason: The release does not disclose QA/QC procedures, lab certification, or CP/QP sign-off.
Evidence · text
“Kingfisher Mining Limited (ASX:KFM) (“Kingfisher” or the “Company”) is pleased to present the quarterly activities report for the period ending 30 September 2026.”
26STRC_020Stephens Trig · leadGrade: 2372Grade Unit: ppmIntercept: 1 mView all detailsHide details
Identity
- Hole ID
- 26STRC_020
- Project
- Stephens Trig
- Commodity
- lead
- Region
- australia_nsw
- Reported Region
- australia_nsw
- Ticker
- KFM
Geometry
- Grade
- 2372
- Grade Unit
- ppm
- Intercept
- 1 m
- From
- 131 m
- To
- 132 m
- Hole Depth
- 142 m
- Intercept Depth
- 85 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- 26STRC_020:131-132
- Mining Method
- open_pit
Location
- Location
- North Zone
- Easting
- 545464
- Northing
- 6478763
- Elevation
- 259 m
- Azimuth
- 120 °
- Dip
- -60 °
- Loc. Confidence
- high
- Loc. Source
- document
Deleterious
- Deleterious Flag
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-10-20T00:00:00.000Z
Reasoning: A weak lead intercept from the maiden drilling program at Stephens Trig, confirming significant mineralisation.
Positive factors
- Weak grade
- Maiden Resource
- Infill Drilling
Negative factors
- Apparent Width Only
- No QA/QC Disclosure
Evidence · table
“2372”
Context: 1
Tags used in scoring
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Rejected tags
Rejected tags — excluded from scoring because their label or evidence could not be verified.
Maiden ResourceRejected · neutral · Story-specific tag
First formal MRE for the project — establishes baseline but typically exploration-stage with high Inferred component.
Reason: The intercept is from the company's maiden drilling program at Stephens Trig.
Evidence · text
“maiden reverse circulation (RC) drilling program at Stephens Trig”
Infill DrillingRejected · neutral
Confirmatory drilling to raise resource confidence, not new discovery.
Reason: The drilling program 'successfully validated historical mineralisation'.
Evidence · text
“successfully validated historical mineralisation”
Apparent Width OnlyRejected · negative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Reason: The interval is given as downhole width with no true width or drill orientation.
Evidence · table
“1”
Context: 1
No QA/QC DisclosureRejected · negative
Release does not disclose QA/QC — lab certification, CP/QP sign-off and assay protocols cannot be checked from this document.
Reason: The release does not disclose QA/QC procedures, lab certification, or CP/QP sign-off.
Evidence · text
“Kingfisher Mining Limited (ASX:KFM) (“Kingfisher” or the “Company”) is pleased to present the quarterly activities report for the period ending 30 September 2026.”
26STRC_021Stephens Trig · leadGrade: 2747Grade Unit: ppmIntercept: 3 mView all detailsHide details
Identity
- Hole ID
- 26STRC_021
- Project
- Stephens Trig
- Commodity
- lead
- Region
- australia_nsw
- Reported Region
- australia_nsw
- Ticker
- KFM
Geometry
- Grade
- 2747
- Grade Unit
- ppm
- Intercept
- 3 m
- From
- 57 m
- To
- 60 m
- Hole Depth
- 76 m
- Intercept Depth
- 57 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- 26STRC_021:57-60
- Mining Method
- open_pit
Location
- Location
- North Zone
- Easting
- 545387
- Northing
- 6478709
- Elevation
- 259 m
- Azimuth
- 120 °
- Dip
- -60 °
- Loc. Confidence
- high
- Loc. Source
- document
Deleterious
- Deleterious Flag
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-10-20T00:00:00.000Z
Reasoning: A moderate lead intercept from the maiden drilling program at Stephens Trig, confirming significant mineralisation.
Positive factors
- Moderate grade
- Maiden Resource
- Infill Drilling
Negative factors
- Apparent Width Only
- No QA/QC Disclosure
Evidence · table
“2747”
Context: 3
Tags used in scoring
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Rejected tags
Rejected tags — excluded from scoring because their label or evidence could not be verified.
Maiden ResourceRejected · neutral · Story-specific tag
First formal MRE for the project — establishes baseline but typically exploration-stage with high Inferred component.
Reason: The intercept is from the company's maiden drilling program at Stephens Trig.
Evidence · text
“maiden reverse circulation (RC) drilling program at Stephens Trig”
Infill DrillingRejected · neutral
Confirmatory drilling to raise resource confidence, not new discovery.
Reason: The drilling program 'successfully validated historical mineralisation'.
Evidence · text
“successfully validated historical mineralisation”
Apparent Width OnlyRejected · negative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Reason: The interval is given as downhole width with no true width or drill orientation.
Evidence · table
“3”
Context: 3
No QA/QC DisclosureRejected · negative
Release does not disclose QA/QC — lab certification, CP/QP sign-off and assay protocols cannot be checked from this document.
Reason: The release does not disclose QA/QC procedures, lab certification, or CP/QP sign-off.
Evidence · text
“Kingfisher Mining Limited (ASX:KFM) (“Kingfisher” or the “Company”) is pleased to present the quarterly activities report for the period ending 30 September 2026.”
26STRC_021Stephens Trig · leadGrade: 3380Grade Unit: ppmIntercept: 1 mView all detailsHide details
Identity
- Hole ID
- 26STRC_021
- Project
- Stephens Trig
- Commodity
- lead
- Region
- australia_nsw
- Reported Region
- australia_nsw
- Ticker
- KFM
Geometry
- Grade
- 3380
- Grade Unit
- ppm
- Intercept
- 1 m
- From
- 59 m
- To
- 60 m
- Hole Depth
- 76 m
- Intercept Depth
- 57 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- 26STRC_021:59-60
- Mining Method
- open_pit
Location
- Location
- North Zone
- Easting
- 545387
- Northing
- 6478709
- Elevation
- 259 m
- Azimuth
- 120 °
- Dip
- -60 °
- Loc. Confidence
- high
- Loc. Source
- document
Deleterious
- Deleterious Flag
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-10-20T00:00:00.000Z
Reasoning: A moderate lead sub-intercept from the maiden drilling program at Stephens Trig, confirming significant mineralisation.
Positive factors
- Moderate grade
- Maiden Resource
- Infill Drilling
Negative factors
- Apparent Width Only
- No QA/QC Disclosure
Evidence · table
“3380”
Context: 1
Tags used in scoring
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Rejected tags
Rejected tags — excluded from scoring because their label or evidence could not be verified.
Maiden ResourceRejected · neutral · Story-specific tag
First formal MRE for the project — establishes baseline but typically exploration-stage with high Inferred component.
Reason: The intercept is from the company's maiden drilling program at Stephens Trig.
Evidence · text
“maiden reverse circulation (RC) drilling program at Stephens Trig”
Infill DrillingRejected · neutral
Confirmatory drilling to raise resource confidence, not new discovery.
Reason: The drilling program 'successfully validated historical mineralisation'.
Evidence · text
“successfully validated historical mineralisation”
Apparent Width OnlyRejected · negative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Reason: The interval is given as downhole width with no true width or drill orientation.
Evidence · table
“1”
Context: 1
No QA/QC DisclosureRejected · negative
Release does not disclose QA/QC — lab certification, CP/QP sign-off and assay protocols cannot be checked from this document.
Reason: The release does not disclose QA/QC procedures, lab certification, or CP/QP sign-off.
Evidence · text
“Kingfisher Mining Limited (ASX:KFM) (“Kingfisher” or the “Company”) is pleased to present the quarterly activities report for the period ending 30 September 2026.”
26STRC_021Stephens Trig · leadGrade: 2713Grade Unit: ppmIntercept: 1 mView all detailsHide details
Identity
- Hole ID
- 26STRC_021
- Project
- Stephens Trig
- Commodity
- lead
- Region
- australia_nsw
- Reported Region
- australia_nsw
- Ticker
- KFM
Geometry
- Grade
- 2713
- Grade Unit
- ppm
- Intercept
- 1 m
- From
- 68 m
- To
- 69 m
- Hole Depth
- 76 m
- Intercept Depth
- 57 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- 26STRC_021:68-69
- Mining Method
- open_pit
Location
- Location
- North Zone
- Easting
- 545387
- Northing
- 6478709
- Elevation
- 259 m
- Azimuth
- 120 °
- Dip
- -60 °
- Loc. Confidence
- high
- Loc. Source
- document
Deleterious
- Deleterious Flag
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-10-20T00:00:00.000Z
Reasoning: A moderate lead intercept from the maiden drilling program at Stephens Trig, confirming significant mineralisation.
Positive factors
- Moderate grade
- Maiden Resource
- Infill Drilling
Negative factors
- Apparent Width Only
- No QA/QC Disclosure
Evidence · table
“2713”
Context: 1
Tags used in scoring
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Rejected tags
Rejected tags — excluded from scoring because their label or evidence could not be verified.
Maiden ResourceRejected · neutral · Story-specific tag
First formal MRE for the project — establishes baseline but typically exploration-stage with high Inferred component.
Reason: The intercept is from the company's maiden drilling program at Stephens Trig.
Evidence · text
“maiden reverse circulation (RC) drilling program at Stephens Trig”
Infill DrillingRejected · neutral
Confirmatory drilling to raise resource confidence, not new discovery.
Reason: The drilling program 'successfully validated historical mineralisation'.
Evidence · text
“successfully validated historical mineralisation”
Apparent Width OnlyRejected · negative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Reason: The interval is given as downhole width with no true width or drill orientation.
Evidence · table
“1”
Context: 1
No QA/QC DisclosureRejected · negative
Release does not disclose QA/QC — lab certification, CP/QP sign-off and assay protocols cannot be checked from this document.
Reason: The release does not disclose QA/QC procedures, lab certification, or CP/QP sign-off.
Evidence · text
“Kingfisher Mining Limited (ASX:KFM) (“Kingfisher” or the “Company”) is pleased to present the quarterly activities report for the period ending 30 September 2026.”
26STRC_022Stephens Trig · leadGrade: 393Grade Unit: ppmIntercept: 2 mView all detailsHide details
Identity
- Hole ID
- 26STRC_022
- Project
- Stephens Trig
- Commodity
- lead
- Region
- australia_nsw
- Reported Region
- australia_nsw
- Ticker
- KFM
Geometry
- Grade
- 393
- Grade Unit
- ppm
- Intercept
- 2 m
- From
- 37 m
- To
- 39 m
- Hole Depth
- 76 m
- Intercept Depth
- 37 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- 26STRC_022:37-39
- Mining Method
- open_pit
Location
- Location
- North Zone
- Easting
- 545360
- Northing
- 6478678
- Elevation
- 260 m
- Azimuth
- 120 °
- Dip
- -60 °
- Loc. Confidence
- high
- Loc. Source
- document
Deleterious
- Deleterious Flag
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-10-20T00:00:00.000Z
Reasoning: A weak lead intercept from the maiden drilling program at Stephens Trig.
Positive factors
- Maiden Resource
- Infill Drilling
Negative factors
- Weak grade
- Apparent Width Only
- No QA/QC Disclosure
Evidence · table
“393”
Context: 2
Tags used in scoring
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Rejected tags
Rejected tags — excluded from scoring because their label or evidence could not be verified.
Maiden ResourceRejected · neutral · Story-specific tag
First formal MRE for the project — establishes baseline but typically exploration-stage with high Inferred component.
Reason: The intercept is from the company's maiden drilling program at Stephens Trig.
Evidence · text
“maiden reverse circulation (RC) drilling program at Stephens Trig”
Infill DrillingRejected · neutral
Confirmatory drilling to raise resource confidence, not new discovery.
Reason: The drilling program 'successfully validated historical mineralisation'.
Evidence · text
“successfully validated historical mineralisation”
Apparent Width OnlyRejected · negative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Reason: The interval is given as downhole width with no true width or drill orientation.
Evidence · table
“2”
Context: 2
No QA/QC DisclosureRejected · negative
Release does not disclose QA/QC — lab certification, CP/QP sign-off and assay protocols cannot be checked from this document.
Reason: The release does not disclose QA/QC procedures, lab certification, or CP/QP sign-off.
Evidence · text
“Kingfisher Mining Limited (ASX:KFM) (“Kingfisher” or the “Company”) is pleased to present the quarterly activities report for the period ending 30 September 2026.”
26STRC_022Stephens Trig · leadGrade: 373Grade Unit: ppmIntercept: 1 mView all detailsHide details
Identity
- Hole ID
- 26STRC_022
- Project
- Stephens Trig
- Commodity
- lead
- Region
- australia_nsw
- Reported Region
- australia_nsw
- Ticker
- KFM
Geometry
- Grade
- 373
- Grade Unit
- ppm
- Intercept
- 1 m
- From
- 42 m
- To
- 43 m
- Hole Depth
- 76 m
- Intercept Depth
- 37 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- 26STRC_022:42-43
- Mining Method
- open_pit
Location
- Location
- North Zone
- Easting
- 545360
- Northing
- 6478678
- Elevation
- 260 m
- Azimuth
- 120 °
- Dip
- -60 °
- Loc. Confidence
- high
- Loc. Source
- document
Deleterious
- Deleterious Flag
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-10-20T00:00:00.000Z
Reasoning: A weak lead intercept from the maiden drilling program at Stephens Trig.
Positive factors
- Maiden Resource
- Infill Drilling
Negative factors
- Weak grade
- Apparent Width Only
- No QA/QC Disclosure
Evidence · table
“373”
Context: 1
Tags used in scoring
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Rejected tags
Rejected tags — excluded from scoring because their label or evidence could not be verified.
Maiden ResourceRejected · neutral · Story-specific tag
First formal MRE for the project — establishes baseline but typically exploration-stage with high Inferred component.
Reason: The intercept is from the company's maiden drilling program at Stephens Trig.
Evidence · text
“maiden reverse circulation (RC) drilling program at Stephens Trig”
Infill DrillingRejected · neutral
Confirmatory drilling to raise resource confidence, not new discovery.
Reason: The drilling program 'successfully validated historical mineralisation'.
Evidence · text
“successfully validated historical mineralisation”
Apparent Width OnlyRejected · negative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Reason: The interval is given as downhole width with no true width or drill orientation.
Evidence · table
“1”
Context: 1
No QA/QC DisclosureRejected · negative
Release does not disclose QA/QC — lab certification, CP/QP sign-off and assay protocols cannot be checked from this document.
Reason: The release does not disclose QA/QC procedures, lab certification, or CP/QP sign-off.
Evidence · text
“Kingfisher Mining Limited (ASX:KFM) (“Kingfisher” or the “Company”) is pleased to present the quarterly activities report for the period ending 30 September 2026.”
26STRC_022Stephens Trig · leadGrade: 1050Grade Unit: ppmIntercept: 1 mView all detailsHide details
Identity
- Hole ID
- 26STRC_022
- Project
- Stephens Trig
- Commodity
- lead
- Region
- australia_nsw
- Reported Region
- australia_nsw
- Ticker
- KFM
Geometry
- Grade
- 1050
- Grade Unit
- ppm
- Intercept
- 1 m
- From
- 64 m
- To
- 65 m
- Hole Depth
- 76 m
- Intercept Depth
- 37 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- 26STRC_022:64-65
- Mining Method
- open_pit
Location
- Location
- North Zone
- Easting
- 545360
- Northing
- 6478678
- Elevation
- 260 m
- Azimuth
- 120 °
- Dip
- -60 °
- Loc. Confidence
- high
- Loc. Source
- document
Deleterious
- Deleterious Flag
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-10-20T00:00:00.000Z
Reasoning: A weak lead intercept from the maiden drilling program at Stephens Trig.
Positive factors
- Weak grade
- Maiden Resource
- Infill Drilling
Negative factors
- Apparent Width Only
- No QA/QC Disclosure
Evidence · table
“1050”
Context: 1
Tags used in scoring
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Rejected tags
Rejected tags — excluded from scoring because their label or evidence could not be verified.
Maiden ResourceRejected · neutral · Story-specific tag
First formal MRE for the project — establishes baseline but typically exploration-stage with high Inferred component.
Reason: The intercept is from the company's maiden drilling program at Stephens Trig.
Evidence · text
“maiden reverse circulation (RC) drilling program at Stephens Trig”
Infill DrillingRejected · neutral
Confirmatory drilling to raise resource confidence, not new discovery.
Reason: The drilling program 'successfully validated historical mineralisation'.
Evidence · text
“successfully validated historical mineralisation”
Apparent Width OnlyRejected · negative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Reason: The interval is given as downhole width with no true width or drill orientation.
Evidence · table
“1”
Context: 1
No QA/QC DisclosureRejected · negative
Release does not disclose QA/QC — lab certification, CP/QP sign-off and assay protocols cannot be checked from this document.
Reason: The release does not disclose QA/QC procedures, lab certification, or CP/QP sign-off.
Evidence · text
“Kingfisher Mining Limited (ASX:KFM) (“Kingfisher” or the “Company”) is pleased to present the quarterly activities report for the period ending 30 September 2026.”
26ADRC_046Allendale · leadGrade: 217.5Grade Unit: ppmIntercept: 1 mView all detailsHide details
Identity
- Hole ID
- 26ADRC_046
- Project
- Allendale
- Commodity
- lead
- Region
- australia_nsw
- Reported Region
- australia_nsw
- Ticker
- KFM
Geometry
- Grade
- 217.5
- Grade Unit
- ppm
- Intercept
- 1 m
- From
- 24 m
- To
- 25 m
- Hole Depth
- 142 m
- Intercept Depth
- 24 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- 26ADRC_046:24-25
- Mining Method
- open_pit
Location
- Location
- North Zone
- Easting
- 545807
- Northing
- 6502891
- Elevation
- 367 m
- Azimuth
- 270 °
- Dip
- -60 °
- Loc. Confidence
- high
- Loc. Source
- document
Deleterious
- Deleterious Flag
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-10-20T00:00:00.000Z
Reasoning: A weak lead intercept from the maiden drilling program at Allendale, validating historical mineralisation.
Positive factors
- Maiden Resource
- Infill Drilling
Negative factors
- Weak grade
- Apparent Width Only
- No QA/QC Disclosure
Evidence · table
“217.5”
Context: 1
Tags used in scoring
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Rejected tags
Rejected tags — excluded from scoring because their label or evidence could not be verified.
Maiden ResourceRejected · neutral · Story-specific tag
First formal MRE for the project — establishes baseline but typically exploration-stage with high Inferred component.
Reason: The intercept is from the company's maiden drilling program at Allendale.
Evidence · text
“maiden reverse circulation (RC) drilling program at Allendale”
Infill DrillingRejected · neutral
Confirmatory drilling to raise resource confidence, not new discovery.
Reason: The drilling program was designed to 'validate historical drilling results'.
Evidence · text
“successfully validated historical exploration results”
Apparent Width OnlyRejected · negative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Reason: The interval is given as downhole width with no true width or drill orientation.
Evidence · table
“1”
Context: 1
No QA/QC DisclosureRejected · negative
Release does not disclose QA/QC — lab certification, CP/QP sign-off and assay protocols cannot be checked from this document.
Reason: The release does not disclose QA/QC procedures, lab certification, or CP/QP sign-off.
Evidence · text
“Kingfisher Mining Limited (ASX:KFM) (“Kingfisher” or the “Company”) is pleased to present the quarterly activities report for the period ending 30 September 2026.”
26ADRC_048Allendale · leadGrade: 14692Grade Unit: ppmIntercept: 1 mView all detailsHide details
Identity
- Hole ID
- 26ADRC_048
- Project
- Allendale
- Commodity
- lead
- Region
- australia_nsw
- Reported Region
- australia_nsw
- Ticker
- KFM
Geometry
- Grade
- 14692
- Grade Unit
- ppm
- Intercept
- 1 m
- From
- 67 m
- To
- 68 m
- Hole Depth
- 82 m
- Intercept Depth
- 67 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- 26ADRC_048:67-68
- Mining Method
- open_pit
Location
- Location
- North Zone
- Easting
- 545746
- Northing
- 6502919
- Elevation
- 370 m
- Azimuth
- 270 °
- Dip
- -50 °
- Loc. Confidence
- high
- Loc. Source
- document
Deleterious
- Deleterious Flag
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-10-20T00:00:00.000Z
Reasoning: A strong lead intercept from the maiden drilling program at Allendale, validating historical mineralisation.
Positive factors
- Strong grade
- Maiden Resource
- Infill Drilling
Negative factors
- Apparent Width Only
- No QA/QC Disclosure
Evidence · table
“14692”
Context: 1
Tags used in scoring
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Rejected tags
Rejected tags — excluded from scoring because their label or evidence could not be verified.
Maiden ResourceRejected · neutral · Story-specific tag
First formal MRE for the project — establishes baseline but typically exploration-stage with high Inferred component.
Reason: The intercept is from the company's maiden drilling program at Allendale.
Evidence · text
“maiden reverse circulation (RC) drilling program at Allendale”
Infill DrillingRejected · neutral
Confirmatory drilling to raise resource confidence, not new discovery.
Reason: The drilling program was designed to 'validate historical drilling results'.
Evidence · text
“successfully validated historical exploration results”
Apparent Width OnlyRejected · negative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Reason: The interval is given as downhole width with no true width or drill orientation.
Evidence · table
“1”
Context: 1
No QA/QC DisclosureRejected · negative
Release does not disclose QA/QC — lab certification, CP/QP sign-off and assay protocols cannot be checked from this document.
Reason: The release does not disclose QA/QC procedures, lab certification, or CP/QP sign-off.
Evidence · text
“Kingfisher Mining Limited (ASX:KFM) (“Kingfisher” or the “Company”) is pleased to present the quarterly activities report for the period ending 30 September 2026.”
26ADRC_048Allendale · leadGrade: 1127.6Grade Unit: ppmIntercept: 1 mView all detailsHide details
Identity
- Hole ID
- 26ADRC_048
- Project
- Allendale
- Commodity
- lead
- Region
- australia_nsw
- Reported Region
- australia_nsw
- Ticker
- KFM
Geometry
- Grade
- 1127.6
- Grade Unit
- ppm
- Intercept
- 1 m
- From
- 74 m
- To
- 75 m
- Hole Depth
- 82 m
- Intercept Depth
- 67 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- 26ADRC_048:74-75
- Mining Method
- open_pit
Location
- Location
- North Zone
- Easting
- 545746
- Northing
- 6502919
- Elevation
- 370 m
- Azimuth
- 270 °
- Dip
- -50 °
- Loc. Confidence
- high
- Loc. Source
- document
Deleterious
- Deleterious Flag
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-10-20T00:00:00.000Z
Reasoning: A weak lead intercept from the maiden drilling program at Allendale, validating historical mineralisation.
Positive factors
- Weak grade
- Maiden Resource
- Infill Drilling
Negative factors
- Apparent Width Only
- No QA/QC Disclosure
Evidence · table
“1127.6”
Context: 1
Tags used in scoring
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Rejected tags
Rejected tags — excluded from scoring because their label or evidence could not be verified.
Maiden ResourceRejected · neutral · Story-specific tag
First formal MRE for the project — establishes baseline but typically exploration-stage with high Inferred component.
Reason: The intercept is from the company's maiden drilling program at Allendale.
Evidence · text
“maiden reverse circulation (RC) drilling program at Allendale”
Infill DrillingRejected · neutral
Confirmatory drilling to raise resource confidence, not new discovery.
Reason: The drilling program was designed to 'validate historical drilling results'.
Evidence · text
“successfully validated historical exploration results”
Apparent Width OnlyRejected · negative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Reason: The interval is given as downhole width with no true width or drill orientation.
Evidence · table
“1”
Context: 1
No QA/QC DisclosureRejected · negative
Release does not disclose QA/QC — lab certification, CP/QP sign-off and assay protocols cannot be checked from this document.
Reason: The release does not disclose QA/QC procedures, lab certification, or CP/QP sign-off.
Evidence · text
“Kingfisher Mining Limited (ASX:KFM) (“Kingfisher” or the “Company”) is pleased to present the quarterly activities report for the period ending 30 September 2026.”
26ADRC_049Allendale · leadGrade: 74.4Grade Unit: ppmIntercept: 1 mView all detailsHide details
Identity
- Hole ID
- 26ADRC_049
- Project
- Allendale
- Commodity
- lead
- Region
- australia_nsw
- Reported Region
- australia_nsw
- Ticker
- KFM
Geometry
- Grade
- 74.4
- Grade Unit
- ppm
- Intercept
- 1 m
- From
- 83 m
- To
- 84 m
- Hole Depth
- 160 m
- Intercept Depth
- 83 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- 26ADRC_049:83-84
- Mining Method
- open_pit
Location
- Location
- North Zone
- Easting
- 545775
- Northing
- 6503017
- Elevation
- 369 m
- Azimuth
- 0 °
- Dip
- -90 °
- Loc. Confidence
- high
- Loc. Source
- document
Deleterious
- Deleterious Flag
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-10-20T00:00:00.000Z
Reasoning: A weak lead intercept from the maiden drilling program at Allendale, validating historical mineralisation.
Positive factors
- Maiden Resource
- Infill Drilling
Negative factors
- Weak grade
- Apparent Width Only
- No QA/QC Disclosure
Evidence · table
“74.4”
Context: 1
Tags used in scoring
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Rejected tags
Rejected tags — excluded from scoring because their label or evidence could not be verified.
Maiden ResourceRejected · neutral · Story-specific tag
First formal MRE for the project — establishes baseline but typically exploration-stage with high Inferred component.
Reason: The intercept is from the company's maiden drilling program at Allendale.
Evidence · text
“maiden reverse circulation (RC) drilling program at Allendale”
Infill DrillingRejected · neutral
Confirmatory drilling to raise resource confidence, not new discovery.
Reason: The drilling program was designed to 'validate historical drilling results'.
Evidence · text
“successfully validated historical exploration results”
Apparent Width OnlyRejected · negative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Reason: The interval is given as downhole width with no true width or drill orientation.
Evidence · table
“1”
Context: 1
No QA/QC DisclosureRejected · negative
Release does not disclose QA/QC — lab certification, CP/QP sign-off and assay protocols cannot be checked from this document.
Reason: The release does not disclose QA/QC procedures, lab certification, or CP/QP sign-off.
Evidence · text
“Kingfisher Mining Limited (ASX:KFM) (“Kingfisher” or the “Company”) is pleased to present the quarterly activities report for the period ending 30 September 2026.”
26ADRC_050Allendale · leadGrade: 10872Grade Unit: ppmIntercept: 7 mView all detailsHide details
Identity
- Hole ID
- 26ADRC_050
- Project
- Allendale
- Commodity
- lead
- Region
- australia_nsw
- Reported Region
- australia_nsw
- Ticker
- KFM
Geometry
- Grade
- 10872
- Grade Unit
- ppm
- Intercept
- 7 m
- From
- 37 m
- To
- 44 m
- Hole Depth
- 58 m
- Intercept Depth
- 37 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- 26ADRC_050:37-44
- Mining Method
- open_pit
Location
- Location
- North Zone
- Easting
- 545735
- Northing
- 6503057
- Elevation
- 360 m
- Azimuth
- 270 °
- Dip
- -50 °
- Loc. Confidence
- high
- Loc. Source
- document
Deleterious
- Deleterious Flag
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-10-20T00:00:00.000Z
Reasoning: A strong lead intercept from the maiden drilling program at Allendale, validating historical mineralisation.
Positive factors
- Strong grade
- Moderate width
- Maiden Resource
- Infill Drilling
Negative factors
- Apparent Width Only
- No QA/QC Disclosure
Evidence · table
“10872”
Context: 7
Tags used in scoring
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Rejected tags
Rejected tags — excluded from scoring because their label or evidence could not be verified.
Maiden ResourceRejected · neutral · Story-specific tag
First formal MRE for the project — establishes baseline but typically exploration-stage with high Inferred component.
Reason: The intercept is from the company's maiden drilling program at Allendale.
Evidence · text
“maiden reverse circulation (RC) drilling program at Allendale”
Infill DrillingRejected · neutral
Confirmatory drilling to raise resource confidence, not new discovery.
Reason: The drilling program was designed to 'validate historical drilling results'.
Evidence · text
“successfully validated historical exploration results”
Apparent Width OnlyRejected · negative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Reason: The interval is given as downhole width with no true width or drill orientation.
Evidence · table
“7”
Context: 7
No QA/QC DisclosureRejected · negative
Release does not disclose QA/QC — lab certification, CP/QP sign-off and assay protocols cannot be checked from this document.
Reason: The release does not disclose QA/QC procedures, lab certification, or CP/QP sign-off.
Evidence · text
“Kingfisher Mining Limited (ASX:KFM) (“Kingfisher” or the “Company”) is pleased to present the quarterly activities report for the period ending 30 September 2026.”
26ADRC_050Allendale · leadGrade: 14943Grade Unit: ppmIntercept: 3 mView all detailsHide details
Identity
- Hole ID
- 26ADRC_050
- Project
- Allendale
- Commodity
- lead
- Region
- australia_nsw
- Reported Region
- australia_nsw
- Ticker
- KFM
Geometry
- Grade
- 14943
- Grade Unit
- ppm
- Intercept
- 3 m
- From
- 38 m
- To
- 41 m
- Hole Depth
- 58 m
- Intercept Depth
- 37 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- 26ADRC_050:38-41
- Mining Method
- open_pit
Location
- Location
- North Zone
- Easting
- 545735
- Northing
- 6503057
- Elevation
- 360 m
- Azimuth
- 270 °
- Dip
- -50 °
- Loc. Confidence
- high
- Loc. Source
- document
Deleterious
- Deleterious Flag
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-10-20T00:00:00.000Z
Reasoning: A strong lead sub-intercept from the maiden drilling program at Allendale, validating historical mineralisation.
Positive factors
- Strong grade
- Maiden Resource
- Infill Drilling
Negative factors
- Apparent Width Only
- No QA/QC Disclosure
Evidence · table
“14943”
Context: 3
Tags used in scoring
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Rejected tags
Rejected tags — excluded from scoring because their label or evidence could not be verified.
Maiden ResourceRejected · neutral · Story-specific tag
First formal MRE for the project — establishes baseline but typically exploration-stage with high Inferred component.
Reason: The intercept is from the company's maiden drilling program at Allendale.
Evidence · text
“maiden reverse circulation (RC) drilling program at Allendale”
Infill DrillingRejected · neutral
Confirmatory drilling to raise resource confidence, not new discovery.
Reason: The drilling program was designed to 'validate historical drilling results'.
Evidence · text
“successfully validated historical exploration results”
Apparent Width OnlyRejected · negative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Reason: The interval is given as downhole width with no true width or drill orientation.
Evidence · table
“3”
Context: 3
No QA/QC DisclosureRejected · negative
Release does not disclose QA/QC — lab certification, CP/QP sign-off and assay protocols cannot be checked from this document.
Reason: The release does not disclose QA/QC procedures, lab certification, or CP/QP sign-off.
Evidence · text
“Kingfisher Mining Limited (ASX:KFM) (“Kingfisher” or the “Company”) is pleased to present the quarterly activities report for the period ending 30 September 2026.”
How Atlas produces this analysis
Minestarters Atlas uses automated extraction to summarize mining announcements, identify reported measurements, and classify supporting evidence. Sentiment reflects the extracted narrative and classification rules; it is an interpretation, not a reported measurement. Evidence quotes and context are provided where available. Missing data, low-confidence results, and review flags indicate limitations. Check the original publisher announcement before relying on an interpretation.