Guardian Metal Resources PLC Announces Positive Tempiute Tungsten Drilling Results
Original announcement by orestocks on
- Company
- Guardian Metal Resources PLC
- Ticker
- GMTLF
- Exchange
- Unavailable
- Region
- Nevada, USA
- Primary commodity
- Tungsten
- Secondary commodities
- Zinc, Silver, Copper
- Document categories
- Drill results
- Extracted
- 2026-09-21 06:36:20 UTC
Analysis by Minestarters Atlas
Atlas analysis published:
Minestarters Atlas analysis
Summary
Guardian Metal Resources PLC announced positive drilling results from its Tempiute Tungsten Project in Nevada, USA. Phase II drilling returned broad intersections, including 92.0m at 0.34% WO3, which is above the project's prior average grade. The company has decided to accelerate the rehabilitation of historical underground workings to facilitate further resource definition and advance towards a Mineral Resource estimate.
Reasoning: The announcement reports broad and high-grade tungsten intercepts, particularly a 92.0m interval at 0.34% WO3, which is above the project's historical average grade. This, combined with the decision to accelerate underground rehabilitation for more efficient drilling and potential mine development, indicates significant positive progress and confidence in the Tempiute project. The regional exploration also successfully identified new mineralized zones, expanding the project's potential.
Positive factors
- Significant broad tungsten intersection (92.0m @ 0.34% WO3) in Phase II drilling, exceeding prior average grade and indicating good continuity.
- High-grade sub-intervals, including 12.7m @ 0.53% WO3 and 1.7m @ 2.00% WO3, demonstrate strong mineralization.
- Decision to accelerate underground rehabilitation signals strong company confidence and a clear pathway to potential mine development.
- Phase I regional drilling successfully identified multiple new tungsten-rich zones, expanding the project's overall potential beyond historical workings.
- The drilling is aimed at supporting an initial Mineral Resource estimate, indicating project advancement.
Negative factors
- True thicknesses of reported intercepts are not yet known, which may overstate actual widths.
- The project is still exploration-stage, and no Mineral Resource or Reserve has been estimated yet.
Facts used in scoring: 85
Extracted facts
Stored fact records: 85. Some facts used in scoring do not have a stored record.
Drill Results (85)
TP26-042Tempiute · tungstenGrade: 0.21Grade Unit: %Intercept: 20.2 mView all detailsHide details
Identity
- Hole ID
- TP26-042
- Project
- Tempiute
- Commodity
- tungsten
- Region
- usa_nv
- Reported Region
- usa_nv
- Ticker
- GMTLF
Geometry
- Grade
- 0.21
- Grade Unit
- %
- Intercept
- 20.2 m
- From
- 210 m
- To
- 230.2 m
- Hole Depth
- 245.67 m
- Intercept Depth
- 210 m
Classification
- Deposit Type
- skarn
- Program
- resource
- Sample Type
- drill
- Group ID
- TP26-042:210-230.2
- Mining Method
- unknown
Location
- Location
- South Thumb
- Easting
- 620965
- Northing
- 4165692
- CRS
- NAD83/ UTM Zone 11N Datum
- Azimuth
- 0 °
- Dip
- -45 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- MSA Labs and ALS Laboratories
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Compositing
- Cutoff Grade
- 0.04
- Cutoff Unit
- % WO3
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-21T00:00:00.000Z
Reasoning: This intercept shows a moderate grade over a good width, contributing to the resource definition program. The grade is slightly below the project average, but the width is good.
Positive factors
- Grade (0.21% WO3) is near the project's prior average (0.238% WO3) for tungsten.
- Intercept length (20.2m) is above the project's prior average (15.5m) for tungsten.
Negative factors
- True thickness is not known.
Evidence · table
“0.21”
Context: 20.20
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
TP26-042Tempiute · zincGrade: 0.22Grade Unit: %Intercept: 20.2 mView all detailsHide details
Identity
- Hole ID
- TP26-042
- Project
- Tempiute
- Commodity
- zinc
- Region
- usa_nv
- Reported Region
- usa_nv
- Ticker
- GMTLF
Geometry
- Grade
- 0.22
- Grade Unit
- %
- Intercept
- 20.2 m
- From
- 210 m
- To
- 230.2 m
- Hole Depth
- 245.67 m
- Intercept Depth
- 210 m
Classification
- Deposit Type
- skarn
- Program
- resource
- Sample Type
- drill
- Group ID
- TP26-042:210-230.2
- Mining Method
- unknown
Location
- Location
- South Thumb
- Easting
- 620965
- Northing
- 4165692
- CRS
- NAD83/ UTM Zone 11N Datum
- Azimuth
- 0 °
- Dip
- -45 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- MSA Labs and ALS Laboratories
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Compositing
- Cutoff Grade
- 0.04
- Cutoff Unit
- % WO3
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-21T00:00:00.000Z
Reasoning: This zinc grade is low compared to the project's historical average, indicating it's likely a byproduct.
Negative factors
- Grade (0.22% Zn) is below the project's prior average (0.723% Zn) for zinc.
Evidence · table
“0.22”
Context: 20.20
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
TP26-042Tempiute · silverGrade: 2.03Grade Unit: ppmIntercept: 20.2 mView all detailsHide details
Identity
- Hole ID
- TP26-042
- Project
- Tempiute
- Commodity
- silver
- Region
- usa_nv
- Reported Region
- usa_nv
- Ticker
- GMTLF
Geometry
- Grade
- 2.03
- Grade Unit
- ppm
- Intercept
- 20.2 m
- From
- 210 m
- To
- 230.2 m
- Hole Depth
- 245.67 m
- Intercept Depth
- 210 m
Classification
- Deposit Type
- skarn
- Program
- resource
- Sample Type
- drill
- Group ID
- TP26-042:210-230.2
- Mining Method
- unknown
Location
- Location
- South Thumb
- Easting
- 620965
- Northing
- 4165692
- CRS
- NAD83/ UTM Zone 11N Datum
- Azimuth
- 0 °
- Dip
- -45 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- MSA Labs and ALS Laboratories
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Compositing
- Cutoff Grade
- 0.04
- Cutoff Unit
- % WO3
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-21T00:00:00.000Z
Reasoning: This silver grade is very low compared to the project's historical average, indicating it's likely a trace element.
Negative factors
- Grade (2.03 ppm Ag) is significantly below the project's prior average (34.887 g/t Ag, or 34887 ppm) for silver.
Evidence · table
“2.03”
Context: 20.20
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
TP26-042Tempiute · copperGrade: 0.01Grade Unit: %Intercept: 20.2 mView all detailsHide details
Identity
- Hole ID
- TP26-042
- Project
- Tempiute
- Commodity
- copper
- Region
- usa_nv
- Reported Region
- usa_nv
- Ticker
- GMTLF
Geometry
- Grade
- 0.01
- Grade Unit
- %
- Intercept
- 20.2 m
- From
- 210 m
- To
- 230.2 m
- Hole Depth
- 245.67 m
- Intercept Depth
- 210 m
Classification
- Deposit Type
- skarn
- Program
- resource
- Sample Type
- drill
- Group ID
- TP26-042:210-230.2
- Mining Method
- unknown
Location
- Location
- South Thumb
- Easting
- 620965
- Northing
- 4165692
- CRS
- NAD83/ UTM Zone 11N Datum
- Azimuth
- 0 °
- Dip
- -45 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- MSA Labs and ALS Laboratories
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Compositing
- Cutoff Grade
- 0.04
- Cutoff Unit
- % WO3
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-21T00:00:00.000Z
Reasoning: This copper grade is very low compared to the project's historical average, indicating it's likely a trace element.
Negative factors
- Grade (0.01% Cu) is significantly below the project's prior average (0.157% Cu) for copper.
Evidence · table
“0.010”
Context: 20.20
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
TP26-042Tempiute · tungstenGrade: 0.35Grade Unit: %Intercept: 6.94 mView all detailsHide details
Identity
- Hole ID
- TP26-042
- Project
- Tempiute
- Commodity
- tungsten
- Region
- usa_nv
- Reported Region
- usa_nv
- Ticker
- GMTLF
Geometry
- Grade
- 0.35
- Grade Unit
- %
- Intercept
- 6.94 m
- From
- 211.91 m
- To
- 218.85 m
- Hole Depth
- 245.67 m
- Intercept Depth
- 210 m
Classification
- Deposit Type
- skarn
- Program
- resource
- Sample Type
- drill
- Group ID
- TP26-042:211.91-218.85
- Mining Method
- unknown
Location
- Location
- South Thumb
- Easting
- 620965
- Northing
- 4165692
- CRS
- NAD83/ UTM Zone 11N Datum
- Azimuth
- 0 °
- Dip
- -45 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- MSA Labs and ALS Laboratories
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Compositing
- Cutoff Grade
- 0.04
- Cutoff Unit
- % WO3
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-21T00:00:00.000Z
Reasoning: This sub-interval shows a good tungsten grade, above the project average, contributing positively to the resource definition.
Positive factors
- Grade (0.35% WO3) is above the project's prior average (0.238% WO3) for tungsten and above the weak threshold (0.25% WO3).
Negative factors
- True thickness is not known.
Evidence · table
“0.35”
Context: 6.94
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
TP26-042Tempiute · zincGrade: 0.55Grade Unit: %Intercept: 6.94 mView all detailsHide details
Identity
- Hole ID
- TP26-042
- Project
- Tempiute
- Commodity
- zinc
- Region
- usa_nv
- Reported Region
- usa_nv
- Ticker
- GMTLF
Geometry
- Grade
- 0.55
- Grade Unit
- %
- Intercept
- 6.94 m
- From
- 211.91 m
- To
- 218.85 m
- Hole Depth
- 245.67 m
- Intercept Depth
- 210 m
Classification
- Deposit Type
- skarn
- Program
- resource
- Sample Type
- drill
- Group ID
- TP26-042:211.91-218.85
- Mining Method
- unknown
Location
- Location
- South Thumb
- Easting
- 620965
- Northing
- 4165692
- CRS
- NAD83/ UTM Zone 11N Datum
- Azimuth
- 0 °
- Dip
- -45 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- MSA Labs and ALS Laboratories
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Compositing
- Cutoff Grade
- 0.04
- Cutoff Unit
- % WO3
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-21T00:00:00.000Z
Reasoning: This zinc grade is low compared to the project's historical average, indicating it's likely a byproduct.
Negative factors
- Grade (0.55% Zn) is below the project's prior average (0.723% Zn) for zinc.
Evidence · table
“0.55”
Context: 6.94
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
TP26-042Tempiute · silverGrade: 3.98Grade Unit: ppmIntercept: 6.94 mView all detailsHide details
Identity
- Hole ID
- TP26-042
- Project
- Tempiute
- Commodity
- silver
- Region
- usa_nv
- Reported Region
- usa_nv
- Ticker
- GMTLF
Geometry
- Grade
- 3.98
- Grade Unit
- ppm
- Intercept
- 6.94 m
- From
- 211.91 m
- To
- 218.85 m
- Hole Depth
- 245.67 m
- Intercept Depth
- 210 m
Classification
- Deposit Type
- skarn
- Program
- resource
- Sample Type
- drill
- Group ID
- TP26-042:211.91-218.85
- Mining Method
- unknown
Location
- Location
- South Thumb
- Easting
- 620965
- Northing
- 4165692
- CRS
- NAD83/ UTM Zone 11N Datum
- Azimuth
- 0 °
- Dip
- -45 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- MSA Labs and ALS Laboratories
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Compositing
- Cutoff Grade
- 0.04
- Cutoff Unit
- % WO3
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-21T00:00:00.000Z
Reasoning: This silver grade is very low compared to the project's historical average, indicating it's likely a trace element.
Negative factors
- Grade (3.98 ppm Ag) is significantly below the project's prior average (34.887 g/t Ag, or 34887 ppm) for silver.
Evidence · table
“3.98”
Context: 6.94
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
TP26-042Tempiute · copperGrade: 0.007Grade Unit: %Intercept: 6.94 mView all detailsHide details
Identity
- Hole ID
- TP26-042
- Project
- Tempiute
- Commodity
- copper
- Region
- usa_nv
- Reported Region
- usa_nv
- Ticker
- GMTLF
Geometry
- Grade
- 0.007
- Grade Unit
- %
- Intercept
- 6.94 m
- From
- 211.91 m
- To
- 218.85 m
- Hole Depth
- 245.67 m
- Intercept Depth
- 210 m
Classification
- Deposit Type
- skarn
- Program
- resource
- Sample Type
- drill
- Group ID
- TP26-042:211.91-218.85
- Mining Method
- unknown
Location
- Location
- South Thumb
- Easting
- 620965
- Northing
- 4165692
- CRS
- NAD83/ UTM Zone 11N Datum
- Azimuth
- 0 °
- Dip
- -45 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- MSA Labs and ALS Laboratories
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Compositing
- Cutoff Grade
- 0.04
- Cutoff Unit
- % WO3
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-21T00:00:00.000Z
Reasoning: This copper grade is very low compared to the project's historical average, indicating it's likely a trace element.
Negative factors
- Grade (0.007% Cu) is significantly below the project's prior average (0.157% Cu) for copper.
Evidence · table
“0.007”
Context: 6.94
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
TP26-044Tempiute · tungstenGrade: 0.22Grade Unit: %Intercept: 23.86 mView all detailsHide details
Identity
- Hole ID
- TP26-044
- Project
- Tempiute
- Commodity
- tungsten
- Region
- usa_nv
- Reported Region
- usa_nv
- Ticker
- GMTLF
Geometry
- Grade
- 0.22
- Grade Unit
- %
- Intercept
- 23.86 m
- From
- 175.14 m
- To
- 199 m
- Hole Depth
- 213.06 m
- Intercept Depth
- 175.14 m
Classification
- Deposit Type
- skarn
- Program
- resource
- Sample Type
- drill
- Group ID
- TP26-044:175.14-199
- Mining Method
- unknown
Location
- Location
- South Thumb
- Easting
- 620968
- Northing
- 4165692
- CRS
- NAD83/ UTM Zone 11N Datum
- Azimuth
- 0 °
- Dip
- -47 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- MSA Labs and ALS Laboratories
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Compositing
- Cutoff Grade
- 0.04
- Cutoff Unit
- % WO3
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-21T00:00:00.000Z
Reasoning: This intercept shows a good width but a slightly lower grade than the project average, and includes an unsampled section, which introduces some uncertainty.
Positive factors
- Intercept length (23.86m) is above the project's prior average (15.5m) for tungsten.
Negative factors
- Grade (0.22% WO3) is slightly below the project's prior average (0.238% WO3) for tungsten.
- True thickness is not known.
- Interval includes 1.57m not sampled, which required nil grade dilution assumption.
Evidence · table
“0.22”
Context: 23.86
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
TP26-044Tempiute · zincGrade: 0.09Grade Unit: %Intercept: 23.86 mView all detailsHide details
Identity
- Hole ID
- TP26-044
- Project
- Tempiute
- Commodity
- zinc
- Region
- usa_nv
- Reported Region
- usa_nv
- Ticker
- GMTLF
Geometry
- Grade
- 0.09
- Grade Unit
- %
- Intercept
- 23.86 m
- From
- 175.14 m
- To
- 199 m
- Hole Depth
- 213.06 m
- Intercept Depth
- 175.14 m
Classification
- Deposit Type
- skarn
- Program
- resource
- Sample Type
- drill
- Group ID
- TP26-044:175.14-199
- Mining Method
- unknown
Location
- Location
- South Thumb
- Easting
- 620968
- Northing
- 4165692
- CRS
- NAD83/ UTM Zone 11N Datum
- Azimuth
- 0 °
- Dip
- -47 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- MSA Labs and ALS Laboratories
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Compositing
- Cutoff Grade
- 0.04
- Cutoff Unit
- % WO3
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-21T00:00:00.000Z
Reasoning: This zinc grade is low compared to the project's historical average, indicating it's likely a byproduct.
Negative factors
- Grade (0.09% Zn) is significantly below the project's prior average (0.723% Zn) for zinc.
Evidence · table
“0.09”
Context: 23.86
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
TP26-044Tempiute · silverGrade: 0.82Grade Unit: ppmIntercept: 23.86 mView all detailsHide details
Identity
- Hole ID
- TP26-044
- Project
- Tempiute
- Commodity
- silver
- Region
- usa_nv
- Reported Region
- usa_nv
- Ticker
- GMTLF
Geometry
- Grade
- 0.82
- Grade Unit
- ppm
- Intercept
- 23.86 m
- From
- 175.14 m
- To
- 199 m
- Hole Depth
- 213.06 m
- Intercept Depth
- 175.14 m
Classification
- Deposit Type
- skarn
- Program
- resource
- Sample Type
- drill
- Group ID
- TP26-044:175.14-199
- Mining Method
- unknown
Location
- Location
- South Thumb
- Easting
- 620968
- Northing
- 4165692
- CRS
- NAD83/ UTM Zone 11N Datum
- Azimuth
- 0 °
- Dip
- -47 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- MSA Labs and ALS Laboratories
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Compositing
- Cutoff Grade
- 0.04
- Cutoff Unit
- % WO3
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-21T00:00:00.000Z
Reasoning: This silver grade is very low compared to the project's historical average, indicating it's likely a trace element.
Negative factors
- Grade (0.82 ppm Ag) is significantly below the project's prior average (34.887 g/t Ag, or 34887 ppm) for silver.
Evidence · table
“0.82”
Context: 23.86
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
TP26-044Tempiute · copperGrade: 0.005Grade Unit: %Intercept: 23.86 mView all detailsHide details
Identity
- Hole ID
- TP26-044
- Project
- Tempiute
- Commodity
- copper
- Region
- usa_nv
- Reported Region
- usa_nv
- Ticker
- GMTLF
Geometry
- Grade
- 0.005
- Grade Unit
- %
- Intercept
- 23.86 m
- From
- 175.14 m
- To
- 199 m
- Hole Depth
- 213.06 m
- Intercept Depth
- 175.14 m
Classification
- Deposit Type
- skarn
- Program
- resource
- Sample Type
- drill
- Group ID
- TP26-044:175.14-199
- Mining Method
- unknown
Location
- Location
- South Thumb
- Easting
- 620968
- Northing
- 4165692
- CRS
- NAD83/ UTM Zone 11N Datum
- Azimuth
- 0 °
- Dip
- -47 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- MSA Labs and ALS Laboratories
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Compositing
- Cutoff Grade
- 0.04
- Cutoff Unit
- % WO3
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-21T00:00:00.000Z
Reasoning: This copper grade is very low compared to the project's historical average, indicating it's likely a trace element.
Negative factors
- Grade (0.005% Cu) is significantly below the project's prior average (0.157% Cu) for copper.
Evidence · table
“0.005”
Context: 23.86
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
TP26-044Tempiute · tungstenGrade: 0.29Grade Unit: %Intercept: 13.18 mView all detailsHide details
Identity
- Hole ID
- TP26-044
- Project
- Tempiute
- Commodity
- tungsten
- Region
- usa_nv
- Reported Region
- usa_nv
- Ticker
- GMTLF
Geometry
- Grade
- 0.29
- Grade Unit
- %
- Intercept
- 13.18 m
- From
- 175.14 m
- To
- 189.89 m
- Hole Depth
- 213.06 m
- Intercept Depth
- 175.14 m
Classification
- Deposit Type
- skarn
- Program
- resource
- Sample Type
- drill
- Group ID
- TP26-044:175.14-189.89
- Mining Method
- unknown
Location
- Location
- South Thumb
- Easting
- 620968
- Northing
- 4165692
- CRS
- NAD83/ UTM Zone 11N Datum
- Azimuth
- 0 °
- Dip
- -47 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- MSA Labs and ALS Laboratories
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Compositing
- Cutoff Grade
- 0.04
- Cutoff Unit
- % WO3
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-21T00:00:00.000Z
Reasoning: This sub-interval shows a good tungsten grade, above the project average, contributing positively to the resource definition.
Positive factors
- Grade (0.29% WO3) is above the project's prior average (0.238% WO3) for tungsten and above the weak threshold (0.25% WO3).
Negative factors
- True thickness is not known.
Evidence · table
“0.29”
Context: 13.18
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
TP26-044Tempiute · zincGrade: 0.14Grade Unit: %Intercept: 13.18 mView all detailsHide details
Identity
- Hole ID
- TP26-044
- Project
- Tempiute
- Commodity
- zinc
- Region
- usa_nv
- Reported Region
- usa_nv
- Ticker
- GMTLF
Geometry
- Grade
- 0.14
- Grade Unit
- %
- Intercept
- 13.18 m
- From
- 175.14 m
- To
- 189.89 m
- Hole Depth
- 213.06 m
- Intercept Depth
- 175.14 m
Classification
- Deposit Type
- skarn
- Program
- resource
- Sample Type
- drill
- Group ID
- TP26-044:175.14-189.89
- Mining Method
- unknown
Location
- Location
- South Thumb
- Easting
- 620968
- Northing
- 4165692
- CRS
- NAD83/ UTM Zone 11N Datum
- Azimuth
- 0 °
- Dip
- -47 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- MSA Labs and ALS Laboratories
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Compositing
- Cutoff Grade
- 0.04
- Cutoff Unit
- % WO3
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-21T00:00:00.000Z
Reasoning: This zinc grade is low compared to the project's historical average, indicating it's likely a byproduct.
Negative factors
- Grade (0.14% Zn) is significantly below the project's prior average (0.723% Zn) for zinc.
Evidence · table
“0.14”
Context: 13.18
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
TP26-044Tempiute · silverGrade: 1.25Grade Unit: ppmIntercept: 13.18 mView all detailsHide details
Identity
- Hole ID
- TP26-044
- Project
- Tempiute
- Commodity
- silver
- Region
- usa_nv
- Reported Region
- usa_nv
- Ticker
- GMTLF
Geometry
- Grade
- 1.25
- Grade Unit
- ppm
- Intercept
- 13.18 m
- From
- 175.14 m
- To
- 189.89 m
- Hole Depth
- 213.06 m
- Intercept Depth
- 175.14 m
Classification
- Deposit Type
- skarn
- Program
- resource
- Sample Type
- drill
- Group ID
- TP26-044:175.14-189.89
- Mining Method
- unknown
Location
- Location
- South Thumb
- Easting
- 620968
- Northing
- 4165692
- CRS
- NAD83/ UTM Zone 11N Datum
- Azimuth
- 0 °
- Dip
- -47 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- MSA Labs and ALS Laboratories
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Compositing
- Cutoff Grade
- 0.04
- Cutoff Unit
- % WO3
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-21T00:00:00.000Z
Reasoning: This silver grade is very low compared to the project's historical average, indicating it's likely a trace element.
Negative factors
- Grade (1.25 ppm Ag) is significantly below the project's prior average (34.887 g/t Ag, or 34887 ppm) for silver.
Evidence · table
“1.25”
Context: 13.18
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
TP26-044Tempiute · copperGrade: 0.004Grade Unit: %Intercept: 13.18 mView all detailsHide details
Identity
- Hole ID
- TP26-044
- Project
- Tempiute
- Commodity
- copper
- Region
- usa_nv
- Reported Region
- usa_nv
- Ticker
- GMTLF
Geometry
- Grade
- 0.004
- Grade Unit
- %
- Intercept
- 13.18 m
- From
- 175.14 m
- To
- 189.89 m
- Hole Depth
- 213.06 m
- Intercept Depth
- 175.14 m
Classification
- Deposit Type
- skarn
- Program
- resource
- Sample Type
- drill
- Group ID
- TP26-044:175.14-189.89
- Mining Method
- unknown
Location
- Location
- South Thumb
- Easting
- 620968
- Northing
- 4165692
- CRS
- NAD83/ UTM Zone 11N Datum
- Azimuth
- 0 °
- Dip
- -47 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- MSA Labs and ALS Laboratories
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Compositing
- Cutoff Grade
- 0.04
- Cutoff Unit
- % WO3
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-21T00:00:00.000Z
Reasoning: This copper grade is very low compared to the project's historical average, indicating it's likely a trace element.
Negative factors
- Grade (0.004% Cu) is significantly below the project's prior average (0.157% Cu) for copper.
Evidence · table
“0.004”
Context: 13.18
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
TP26-045Tempiute · tungstenGrade: 0.28Grade Unit: %Intercept: 5.16 mView all detailsHide details
Identity
- Hole ID
- TP26-045
- Project
- Tempiute
- Commodity
- tungsten
- Region
- usa_nv
- Reported Region
- usa_nv
- Ticker
- GMTLF
Geometry
- Grade
- 0.28
- Grade Unit
- %
- Intercept
- 5.16 m
- From
- 253.43 m
- To
- 258.59 m
- Hole Depth
- 267.31 m
- Intercept Depth
- 253.43 m
Classification
- Deposit Type
- skarn
- Program
- resource
- Sample Type
- drill
- Group ID
- TP26-045:253.43-258.59
- Mining Method
- unknown
Location
- Location
- South Thumb
- Easting
- 620964
- Northing
- 4165689
- CRS
- NAD83/ UTM Zone 11N Datum
- Azimuth
- 0 °
- Dip
- -55 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- MSA Labs and ALS Laboratories
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Compositing
- Cutoff Grade
- 0.04
- Cutoff Unit
- % WO3
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-21T00:00:00.000Z
Reasoning: This intercept shows a good tungsten grade, above the project average, but over a relatively narrow width.
Positive factors
- Grade (0.28% WO3) is above the project's prior average (0.238% WO3) for tungsten and above the weak threshold (0.25% WO3).
Negative factors
- Intercept length (5.16m) is below the project's prior average (15.5m) for tungsten.
- True thickness is not known.
Evidence · table
“0.28”
Context: 5.16
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
TP26-045Tempiute · zincGrade: 0.08Grade Unit: %Intercept: 5.16 mView all detailsHide details
Identity
- Hole ID
- TP26-045
- Project
- Tempiute
- Commodity
- zinc
- Region
- usa_nv
- Reported Region
- usa_nv
- Ticker
- GMTLF
Geometry
- Grade
- 0.08
- Grade Unit
- %
- Intercept
- 5.16 m
- From
- 253.43 m
- To
- 258.59 m
- Hole Depth
- 267.31 m
- Intercept Depth
- 253.43 m
Classification
- Deposit Type
- skarn
- Program
- resource
- Sample Type
- drill
- Group ID
- TP26-045:253.43-258.59
- Mining Method
- unknown
Location
- Location
- South Thumb
- Easting
- 620964
- Northing
- 4165689
- CRS
- NAD83/ UTM Zone 11N Datum
- Azimuth
- 0 °
- Dip
- -55 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- MSA Labs and ALS Laboratories
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Compositing
- Cutoff Grade
- 0.04
- Cutoff Unit
- % WO3
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-21T00:00:00.000Z
Reasoning: This zinc grade is low compared to the project's historical average, indicating it's likely a byproduct.
Negative factors
- Grade (0.08% Zn) is significantly below the project's prior average (0.723% Zn) for zinc.
Evidence · table
“0.08”
Context: 5.16
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
TP26-045Tempiute · silverGrade: 2.75Grade Unit: ppmIntercept: 5.16 mView all detailsHide details
Identity
- Hole ID
- TP26-045
- Project
- Tempiute
- Commodity
- silver
- Region
- usa_nv
- Reported Region
- usa_nv
- Ticker
- GMTLF
Geometry
- Grade
- 2.75
- Grade Unit
- ppm
- Intercept
- 5.16 m
- From
- 253.43 m
- To
- 258.59 m
- Hole Depth
- 267.31 m
- Intercept Depth
- 253.43 m
Classification
- Deposit Type
- skarn
- Program
- resource
- Sample Type
- drill
- Group ID
- TP26-045:253.43-258.59
- Mining Method
- unknown
Location
- Location
- South Thumb
- Easting
- 620964
- Northing
- 4165689
- CRS
- NAD83/ UTM Zone 11N Datum
- Azimuth
- 0 °
- Dip
- -55 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- MSA Labs and ALS Laboratories
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Compositing
- Cutoff Grade
- 0.04
- Cutoff Unit
- % WO3
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-21T00:00:00.000Z
Reasoning: This silver grade is very low compared to the project's historical average, indicating it's likely a trace element.
Negative factors
- Grade (2.75 ppm Ag) is significantly below the project's prior average (34.887 g/t Ag, or 34887 ppm) for silver.
Evidence · table
“2.75”
Context: 5.16
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
TP26-045Tempiute · copperGrade: 0.025Grade Unit: %Intercept: 5.16 mView all detailsHide details
Identity
- Hole ID
- TP26-045
- Project
- Tempiute
- Commodity
- copper
- Region
- usa_nv
- Reported Region
- usa_nv
- Ticker
- GMTLF
Geometry
- Grade
- 0.025
- Grade Unit
- %
- Intercept
- 5.16 m
- From
- 253.43 m
- To
- 258.59 m
- Hole Depth
- 267.31 m
- Intercept Depth
- 253.43 m
Classification
- Deposit Type
- skarn
- Program
- resource
- Sample Type
- drill
- Group ID
- TP26-045:253.43-258.59
- Mining Method
- unknown
Location
- Location
- South Thumb
- Easting
- 620964
- Northing
- 4165689
- CRS
- NAD83/ UTM Zone 11N Datum
- Azimuth
- 0 °
- Dip
- -55 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- MSA Labs and ALS Laboratories
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Compositing
- Cutoff Grade
- 0.04
- Cutoff Unit
- % WO3
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-21T00:00:00.000Z
Reasoning: This copper grade is very low compared to the project's historical average, indicating it's likely a trace element.
Negative factors
- Grade (0.025% Cu) is significantly below the project's prior average (0.157% Cu) for copper.
Evidence · table
“0.025”
Context: 5.16
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
TP26-046Tempiute · tungstenGrade: 0.27Grade Unit: %Intercept: 27.86 mView all detailsHide details
Identity
- Hole ID
- TP26-046
- Project
- Tempiute
- Commodity
- tungsten
- Region
- usa_nv
- Reported Region
- usa_nv
- Ticker
- GMTLF
Geometry
- Grade
- 0.27
- Grade Unit
- %
- Intercept
- 27.86 m
- From
- 68.6 m
- To
- 96.46 m
- Hole Depth
- 205.27 m
- Intercept Depth
- 68.6 m
Classification
- Deposit Type
- skarn
- Program
- resource
- Sample Type
- drill
- Group ID
- TP26-046:68.6-96.46
- Mining Method
- unknown
Location
- Location
- Schofield
- Easting
- 621225
- Northing
- 4165537
- CRS
- NAD83/ UTM Zone 11N Datum
- Azimuth
- 260 °
- Dip
- -50 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- MSA Labs and ALS Laboratories
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Compositing
- Cutoff Grade
- 0.04
- Cutoff Unit
- % WO3
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-21T00:00:00.000Z
Reasoning: This intercept shows a good tungsten grade over a significant width, contributing positively to the resource definition.
Positive factors
- Grade (0.27% WO3) is above the project's prior average (0.238% WO3) for tungsten and above the weak threshold (0.25% WO3).
- Intercept length (27.86m) is above the project's prior average (15.5m) for tungsten.
Negative factors
- True thickness is not known.
Evidence · table
“0.27”
Context: 27.86
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
TP26-046Tempiute · zincGrade: 0.28Grade Unit: %Intercept: 27.86 mView all detailsHide details
Identity
- Hole ID
- TP26-046
- Project
- Tempiute
- Commodity
- zinc
- Region
- usa_nv
- Reported Region
- usa_nv
- Ticker
- GMTLF
Geometry
- Grade
- 0.28
- Grade Unit
- %
- Intercept
- 27.86 m
- From
- 68.6 m
- To
- 96.46 m
- Hole Depth
- 205.27 m
- Intercept Depth
- 68.6 m
Classification
- Deposit Type
- skarn
- Program
- resource
- Sample Type
- drill
- Group ID
- TP26-046:68.6-96.46
- Mining Method
- unknown
Location
- Location
- Schofield
- Easting
- 621225
- Northing
- 4165537
- CRS
- NAD83/ UTM Zone 11N Datum
- Azimuth
- 260 °
- Dip
- -50 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- MSA Labs and ALS Laboratories
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Compositing
- Cutoff Grade
- 0.04
- Cutoff Unit
- % WO3
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-21T00:00:00.000Z
Reasoning: This zinc grade is low compared to the project's historical average, indicating it's likely a byproduct.
Negative factors
- Grade (0.28% Zn) is below the project's prior average (0.723% Zn) for zinc.
Evidence · table
“0.28”
Context: 27.86
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
TP26-046Tempiute · silverGrade: 0.84Grade Unit: ppmIntercept: 27.86 mView all detailsHide details
Identity
- Hole ID
- TP26-046
- Project
- Tempiute
- Commodity
- silver
- Region
- usa_nv
- Reported Region
- usa_nv
- Ticker
- GMTLF
Geometry
- Grade
- 0.84
- Grade Unit
- ppm
- Intercept
- 27.86 m
- From
- 68.6 m
- To
- 96.46 m
- Hole Depth
- 205.27 m
- Intercept Depth
- 68.6 m
Classification
- Deposit Type
- skarn
- Program
- resource
- Sample Type
- drill
- Group ID
- TP26-046:68.6-96.46
- Mining Method
- unknown
Location
- Location
- Schofield
- Easting
- 621225
- Northing
- 4165537
- CRS
- NAD83/ UTM Zone 11N Datum
- Azimuth
- 260 °
- Dip
- -50 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- MSA Labs and ALS Laboratories
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Compositing
- Cutoff Grade
- 0.04
- Cutoff Unit
- % WO3
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-21T00:00:00.000Z
Reasoning: This silver grade is very low compared to the project's historical average, indicating it's likely a trace element.
Negative factors
- Grade (0.84 ppm Ag) is significantly below the project's prior average (34.887 g/t Ag, or 34887 ppm) for silver.
Evidence · table
“0.84”
Context: 27.86
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
TP26-046Tempiute · copperGrade: 0.028Grade Unit: %Intercept: 27.86 mView all detailsHide details
Identity
- Hole ID
- TP26-046
- Project
- Tempiute
- Commodity
- copper
- Region
- usa_nv
- Reported Region
- usa_nv
- Ticker
- GMTLF
Geometry
- Grade
- 0.028
- Grade Unit
- %
- Intercept
- 27.86 m
- From
- 68.6 m
- To
- 96.46 m
- Hole Depth
- 205.27 m
- Intercept Depth
- 68.6 m
Classification
- Deposit Type
- skarn
- Program
- resource
- Sample Type
- drill
- Group ID
- TP26-046:68.6-96.46
- Mining Method
- unknown
Location
- Location
- Schofield
- Easting
- 621225
- Northing
- 4165537
- CRS
- NAD83/ UTM Zone 11N Datum
- Azimuth
- 260 °
- Dip
- -50 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- MSA Labs and ALS Laboratories
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Compositing
- Cutoff Grade
- 0.04
- Cutoff Unit
- % WO3
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-21T00:00:00.000Z
Reasoning: This copper grade is very low compared to the project's historical average, indicating it's likely a trace element.
Negative factors
- Grade (0.028% Cu) is significantly below the project's prior average (0.157% Cu) for copper.
Evidence · table
“0.028”
Context: 27.86
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
TP26-046Tempiute · tungstenGrade: 0.36Grade Unit: %Intercept: 10.45 mView all detailsHide details
Identity
- Hole ID
- TP26-046
- Project
- Tempiute
- Commodity
- tungsten
- Region
- usa_nv
- Reported Region
- usa_nv
- Ticker
- GMTLF
Geometry
- Grade
- 0.36
- Grade Unit
- %
- Intercept
- 10.45 m
- From
- 70.1 m
- To
- 80.55 m
- Hole Depth
- 205.27 m
- Intercept Depth
- 68.6 m
Classification
- Deposit Type
- skarn
- Program
- resource
- Sample Type
- drill
- Group ID
- TP26-046:70.1-80.55
- Mining Method
- unknown
Location
- Location
- Schofield
- Easting
- 621225
- Northing
- 4165537
- CRS
- NAD83/ UTM Zone 11N Datum
- Azimuth
- 260 °
- Dip
- -50 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- MSA Labs and ALS Laboratories
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Compositing
- Cutoff Grade
- 0.04
- Cutoff Unit
- % WO3
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-21T00:00:00.000Z
Reasoning: This sub-interval shows a good tungsten grade, above the project average, contributing positively to the resource definition.
Positive factors
- Grade (0.36% WO3) is above the project's prior average (0.238% WO3) for tungsten and above the weak threshold (0.25% WO3).
Negative factors
- True thickness is not known.
Evidence · table
“0.36”
Context: 10.45
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
TP26-046Tempiute · zincGrade: 0.13Grade Unit: %Intercept: 10.45 mView all detailsHide details
Identity
- Hole ID
- TP26-046
- Project
- Tempiute
- Commodity
- zinc
- Region
- usa_nv
- Reported Region
- usa_nv
- Ticker
- GMTLF
Geometry
- Grade
- 0.13
- Grade Unit
- %
- Intercept
- 10.45 m
- From
- 70.1 m
- To
- 80.55 m
- Hole Depth
- 205.27 m
- Intercept Depth
- 68.6 m
Classification
- Deposit Type
- skarn
- Program
- resource
- Sample Type
- drill
- Group ID
- TP26-046:70.1-80.55
- Mining Method
- unknown
Location
- Location
- Schofield
- Easting
- 621225
- Northing
- 4165537
- CRS
- NAD83/ UTM Zone 11N Datum
- Azimuth
- 260 °
- Dip
- -50 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- MSA Labs and ALS Laboratories
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Compositing
- Cutoff Grade
- 0.04
- Cutoff Unit
- % WO3
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-21T00:00:00.000Z
Reasoning: This zinc grade is low compared to the project's historical average, indicating it's likely a byproduct.
Negative factors
- Grade (0.13% Zn) is significantly below the project's prior average (0.723% Zn) for zinc.
Evidence · table
“0.13”
Context: 10.45
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
TP26-046Tempiute · silverGrade: 1.42Grade Unit: ppmIntercept: 10.45 mView all detailsHide details
Identity
- Hole ID
- TP26-046
- Project
- Tempiute
- Commodity
- silver
- Region
- usa_nv
- Reported Region
- usa_nv
- Ticker
- GMTLF
Geometry
- Grade
- 1.42
- Grade Unit
- ppm
- Intercept
- 10.45 m
- From
- 70.1 m
- To
- 80.55 m
- Hole Depth
- 205.27 m
- Intercept Depth
- 68.6 m
Classification
- Deposit Type
- skarn
- Program
- resource
- Sample Type
- drill
- Group ID
- TP26-046:70.1-80.55
- Mining Method
- unknown
Location
- Location
- Schofield
- Easting
- 621225
- Northing
- 4165537
- CRS
- NAD83/ UTM Zone 11N Datum
- Azimuth
- 260 °
- Dip
- -50 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- MSA Labs and ALS Laboratories
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Compositing
- Cutoff Grade
- 0.04
- Cutoff Unit
- % WO3
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-21T00:00:00.000Z
Reasoning: This silver grade is very low compared to the project's historical average, indicating it's likely a trace element.
Negative factors
- Grade (1.42 ppm Ag) is significantly below the project's prior average (34.887 g/t Ag, or 34887 ppm) for silver.
Evidence · table
“1.42”
Context: 10.45
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
TP26-046Tempiute · copperGrade: 0.028Grade Unit: %Intercept: 10.45 mView all detailsHide details
Identity
- Hole ID
- TP26-046
- Project
- Tempiute
- Commodity
- copper
- Region
- usa_nv
- Reported Region
- usa_nv
- Ticker
- GMTLF
Geometry
- Grade
- 0.028
- Grade Unit
- %
- Intercept
- 10.45 m
- From
- 70.1 m
- To
- 80.55 m
- Hole Depth
- 205.27 m
- Intercept Depth
- 68.6 m
Classification
- Deposit Type
- skarn
- Program
- resource
- Sample Type
- drill
- Group ID
- TP26-046:70.1-80.55
- Mining Method
- unknown
Location
- Location
- Schofield
- Easting
- 621225
- Northing
- 4165537
- CRS
- NAD83/ UTM Zone 11N Datum
- Azimuth
- 260 °
- Dip
- -50 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- MSA Labs and ALS Laboratories
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Compositing
- Cutoff Grade
- 0.04
- Cutoff Unit
- % WO3
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-21T00:00:00.000Z
Reasoning: This copper grade is very low compared to the project's historical average, indicating it's likely a trace element.
Negative factors
- Grade (0.028% Cu) is significantly below the project's prior average (0.157% Cu) for copper.
Evidence · table
“0.028”
Context: 10.45
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
TP26-046Tempiute · tungstenGrade: 0.31Grade Unit: %Intercept: 5.86 mView all detailsHide details
Identity
- Hole ID
- TP26-046
- Project
- Tempiute
- Commodity
- tungsten
- Region
- usa_nv
- Reported Region
- usa_nv
- Ticker
- GMTLF
Geometry
- Grade
- 0.31
- Grade Unit
- %
- Intercept
- 5.86 m
- From
- 85.94 m
- To
- 91.8 m
- Hole Depth
- 205.27 m
- Intercept Depth
- 68.6 m
Classification
- Deposit Type
- skarn
- Program
- resource
- Sample Type
- drill
- Group ID
- TP26-046:85.94-91.8
- Mining Method
- unknown
Location
- Location
- Schofield
- Easting
- 621225
- Northing
- 4165537
- CRS
- NAD83/ UTM Zone 11N Datum
- Azimuth
- 260 °
- Dip
- -50 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- MSA Labs and ALS Laboratories
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Compositing
- Cutoff Grade
- 0.04
- Cutoff Unit
- % WO3
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-21T00:00:00.000Z
Reasoning: This sub-interval shows a good tungsten grade, above the project average, but over a relatively narrow width.
Positive factors
- Grade (0.31% WO3) is above the project's prior average (0.238% WO3) for tungsten and above the weak threshold (0.25% WO3).
Negative factors
- Intercept length (5.86m) is below the project's prior average (15.5m) for tungsten.
- True thickness is not known.
Evidence · table
“0.31”
Context: 5.86
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
TP26-046Tempiute · zincGrade: 0.54Grade Unit: %Intercept: 5.86 mView all detailsHide details
Identity
- Hole ID
- TP26-046
- Project
- Tempiute
- Commodity
- zinc
- Region
- usa_nv
- Reported Region
- usa_nv
- Ticker
- GMTLF
Geometry
- Grade
- 0.54
- Grade Unit
- %
- Intercept
- 5.86 m
- From
- 85.94 m
- To
- 91.8 m
- Hole Depth
- 205.27 m
- Intercept Depth
- 68.6 m
Classification
- Deposit Type
- skarn
- Program
- resource
- Sample Type
- drill
- Group ID
- TP26-046:85.94-91.8
- Mining Method
- unknown
Location
- Location
- Schofield
- Easting
- 621225
- Northing
- 4165537
- CRS
- NAD83/ UTM Zone 11N Datum
- Azimuth
- 260 °
- Dip
- -50 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- MSA Labs and ALS Laboratories
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Compositing
- Cutoff Grade
- 0.04
- Cutoff Unit
- % WO3
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-21T00:00:00.000Z
Reasoning: This zinc grade is low compared to the project's historical average, indicating it's likely a byproduct.
Negative factors
- Grade (0.54% Zn) is below the project's prior average (0.723% Zn) for zinc.
Evidence · table
“0.54”
Context: 5.86
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
TP26-046Tempiute · silverGrade: 0.47Grade Unit: ppmIntercept: 5.86 mView all detailsHide details
Identity
- Hole ID
- TP26-046
- Project
- Tempiute
- Commodity
- silver
- Region
- usa_nv
- Reported Region
- usa_nv
- Ticker
- GMTLF
Geometry
- Grade
- 0.47
- Grade Unit
- ppm
- Intercept
- 5.86 m
- From
- 85.94 m
- To
- 91.8 m
- Hole Depth
- 205.27 m
- Intercept Depth
- 68.6 m
Classification
- Deposit Type
- skarn
- Program
- resource
- Sample Type
- drill
- Group ID
- TP26-046:85.94-91.8
- Mining Method
- unknown
Location
- Location
- Schofield
- Easting
- 621225
- Northing
- 4165537
- CRS
- NAD83/ UTM Zone 11N Datum
- Azimuth
- 260 °
- Dip
- -50 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- MSA Labs and ALS Laboratories
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Compositing
- Cutoff Grade
- 0.04
- Cutoff Unit
- % WO3
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-21T00:00:00.000Z
Reasoning: This silver grade is very low compared to the project's historical average, indicating it's likely a trace element.
Negative factors
- Grade (0.47 ppm Ag) is significantly below the project's prior average (34.887 g/t Ag, or 34887 ppm) for silver.
Evidence · table
“0.47”
Context: 5.86
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
TP26-046Tempiute · copperGrade: 0.04Grade Unit: %Intercept: 5.86 mView all detailsHide details
Identity
- Hole ID
- TP26-046
- Project
- Tempiute
- Commodity
- copper
- Region
- usa_nv
- Reported Region
- usa_nv
- Ticker
- GMTLF
Geometry
- Grade
- 0.04
- Grade Unit
- %
- Intercept
- 5.86 m
- From
- 85.94 m
- To
- 91.8 m
- Hole Depth
- 205.27 m
- Intercept Depth
- 68.6 m
Classification
- Deposit Type
- skarn
- Program
- resource
- Sample Type
- drill
- Group ID
- TP26-046:85.94-91.8
- Mining Method
- unknown
Location
- Location
- Schofield
- Easting
- 621225
- Northing
- 4165537
- CRS
- NAD83/ UTM Zone 11N Datum
- Azimuth
- 260 °
- Dip
- -50 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- MSA Labs and ALS Laboratories
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Compositing
- Cutoff Grade
- 0.04
- Cutoff Unit
- % WO3
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-21T00:00:00.000Z
Reasoning: This copper grade is very low compared to the project's historical average, indicating it's likely a trace element.
Negative factors
- Grade (0.04% Cu) is significantly below the project's prior average (0.157% Cu) for copper.
Evidence · table
“0.040”
Context: 5.86
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
TP26-046Tempiute · tungstenGrade: 0.34Grade Unit: %Intercept: 91.95 mView all detailsHide details
Identity
- Hole ID
- TP26-046
- Project
- Tempiute
- Commodity
- tungsten
- Region
- usa_nv
- Reported Region
- usa_nv
- Ticker
- GMTLF
Geometry
- Grade
- 0.34
- Grade Unit
- %
- Intercept
- 91.95 m
- From
- 102.5 m
- To
- 194.45 m
- Hole Depth
- 205.27 m
- Intercept Depth
- 68.6 m
Classification
- Deposit Type
- skarn
- Program
- resource
- Sample Type
- drill
- Group ID
- TP26-046:102.5-194.45
- Mining Method
- unknown
Location
- Location
- Schofield
- Easting
- 621225
- Northing
- 4165537
- CRS
- NAD83/ UTM Zone 11N Datum
- Azimuth
- 260 °
- Dip
- -50 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- MSA Labs and ALS Laboratories
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Compositing
- Cutoff Grade
- 0.04
- Cutoff Unit
- % WO3
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-21T00:00:00.000Z
Reasoning: This is a very significant intercept with good grade over an exceptional width, indicating strong mineralization and potential for a large resource. It is a key highlight of the release.
Positive factors
- Grade (0.34% WO3) is above the project's prior average (0.238% WO3) for tungsten and above the weak threshold (0.25% WO3).
- Intercept length (91.95m) is significantly above the project's prior average (15.5m) for tungsten, indicating broad mineralization.
- GT product (31.26 %·m) is above the weak threshold (20 %·m).
Negative factors
- True thickness is not known.
Evidence · table
“0.34”
Context: 91.95
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
TP26-046Tempiute · zincGrade: 0.79Grade Unit: %Intercept: 91.95 mView all detailsHide details
Identity
- Hole ID
- TP26-046
- Project
- Tempiute
- Commodity
- zinc
- Region
- usa_nv
- Reported Region
- usa_nv
- Ticker
- GMTLF
Geometry
- Grade
- 0.79
- Grade Unit
- %
- Intercept
- 91.95 m
- From
- 102.5 m
- To
- 194.45 m
- Hole Depth
- 205.27 m
- Intercept Depth
- 68.6 m
Classification
- Deposit Type
- skarn
- Program
- resource
- Sample Type
- drill
- Group ID
- TP26-046:102.5-194.45
- Mining Method
- unknown
Location
- Location
- Schofield
- Easting
- 621225
- Northing
- 4165537
- CRS
- NAD83/ UTM Zone 11N Datum
- Azimuth
- 260 °
- Dip
- -50 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- MSA Labs and ALS Laboratories
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Compositing
- Cutoff Grade
- 0.04
- Cutoff Unit
- % WO3
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-21T00:00:00.000Z
Reasoning: This zinc grade is slightly above the project's historical average, indicating it's a minor positive byproduct.
Positive factors
- Grade (0.79% Zn) is above the project's prior average (0.723% Zn) for zinc.
Evidence · table
“0.79”
Context: 91.95
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
TP26-046Tempiute · silverGrade: 4.13Grade Unit: ppmIntercept: 91.95 mView all detailsHide details
Identity
- Hole ID
- TP26-046
- Project
- Tempiute
- Commodity
- silver
- Region
- usa_nv
- Reported Region
- usa_nv
- Ticker
- GMTLF
Geometry
- Grade
- 4.13
- Grade Unit
- ppm
- Intercept
- 91.95 m
- From
- 102.5 m
- To
- 194.45 m
- Hole Depth
- 205.27 m
- Intercept Depth
- 68.6 m
Classification
- Deposit Type
- skarn
- Program
- resource
- Sample Type
- drill
- Group ID
- TP26-046:102.5-194.45
- Mining Method
- unknown
Location
- Location
- Schofield
- Easting
- 621225
- Northing
- 4165537
- CRS
- NAD83/ UTM Zone 11N Datum
- Azimuth
- 260 °
- Dip
- -50 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- MSA Labs and ALS Laboratories
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Compositing
- Cutoff Grade
- 0.04
- Cutoff Unit
- % WO3
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-21T00:00:00.000Z
Reasoning: This silver grade is very low compared to the project's historical average, indicating it's likely a trace element.
Negative factors
- Grade (4.13 ppm Ag) is significantly below the project's prior average (34.887 g/t Ag, or 34887 ppm) for silver.
Evidence · table
“4.13”
Context: 91.95
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
TP26-046Tempiute · copperGrade: 0.049Grade Unit: %Intercept: 91.95 mView all detailsHide details
Identity
- Hole ID
- TP26-046
- Project
- Tempiute
- Commodity
- copper
- Region
- usa_nv
- Reported Region
- usa_nv
- Ticker
- GMTLF
Geometry
- Grade
- 0.049
- Grade Unit
- %
- Intercept
- 91.95 m
- From
- 102.5 m
- To
- 194.45 m
- Hole Depth
- 205.27 m
- Intercept Depth
- 68.6 m
Classification
- Deposit Type
- skarn
- Program
- resource
- Sample Type
- drill
- Group ID
- TP26-046:102.5-194.45
- Mining Method
- unknown
Location
- Location
- Schofield
- Easting
- 621225
- Northing
- 4165537
- CRS
- NAD83/ UTM Zone 11N Datum
- Azimuth
- 260 °
- Dip
- -50 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- MSA Labs and ALS Laboratories
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Compositing
- Cutoff Grade
- 0.04
- Cutoff Unit
- % WO3
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-21T00:00:00.000Z
Reasoning: This copper grade is very low compared to the project's historical average, indicating it's likely a trace element.
Negative factors
- Grade (0.049% Cu) is significantly below the project's prior average (0.157% Cu) for copper.
Evidence · table
“0.049”
Context: 91.95
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
TP26-046Tempiute · tungstenGrade: 0.33Grade Unit: %Intercept: 16.4 mView all detailsHide details
Identity
- Hole ID
- TP26-046
- Project
- Tempiute
- Commodity
- tungsten
- Region
- usa_nv
- Reported Region
- usa_nv
- Ticker
- GMTLF
Geometry
- Grade
- 0.33
- Grade Unit
- %
- Intercept
- 16.4 m
- From
- 111.6 m
- To
- 128 m
- Hole Depth
- 205.27 m
- Intercept Depth
- 68.6 m
Classification
- Deposit Type
- skarn
- Program
- resource
- Sample Type
- drill
- Group ID
- TP26-046:111.6-128
- Mining Method
- unknown
Location
- Location
- Schofield
- Easting
- 621225
- Northing
- 4165537
- CRS
- NAD83/ UTM Zone 11N Datum
- Azimuth
- 260 °
- Dip
- -50 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- MSA Labs and ALS Laboratories
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Compositing
- Cutoff Grade
- 0.04
- Cutoff Unit
- % WO3
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-21T00:00:00.000Z
Reasoning: This sub-interval shows a good tungsten grade over a good width, contributing positively to the resource definition.
Positive factors
- Grade (0.33% WO3) is above the project's prior average (0.238% WO3) for tungsten and above the weak threshold (0.25% WO3).
- Intercept length (16.4m) is above the project's prior average (15.5m) for tungsten.
Negative factors
- True thickness is not known.
Evidence · table
“0.33”
Context: 16.40
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
TP26-046Tempiute · zincGrade: 0.34Grade Unit: %Intercept: 16.4 mView all detailsHide details
Identity
- Hole ID
- TP26-046
- Project
- Tempiute
- Commodity
- zinc
- Region
- usa_nv
- Reported Region
- usa_nv
- Ticker
- GMTLF
Geometry
- Grade
- 0.34
- Grade Unit
- %
- Intercept
- 16.4 m
- From
- 111.6 m
- To
- 128 m
- Hole Depth
- 205.27 m
- Intercept Depth
- 68.6 m
Classification
- Deposit Type
- skarn
- Program
- resource
- Sample Type
- drill
- Group ID
- TP26-046:111.6-128
- Mining Method
- unknown
Location
- Location
- Schofield
- Easting
- 621225
- Northing
- 4165537
- CRS
- NAD83/ UTM Zone 11N Datum
- Azimuth
- 260 °
- Dip
- -50 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- MSA Labs and ALS Laboratories
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Compositing
- Cutoff Grade
- 0.04
- Cutoff Unit
- % WO3
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-21T00:00:00.000Z
Reasoning: This zinc grade is low compared to the project's historical average, indicating it's likely a byproduct.
Negative factors
- Grade (0.34% Zn) is below the project's prior average (0.723% Zn) for zinc.
Evidence · table
“0.34”
Context: 16.40
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
TP26-046Tempiute · silverGrade: 1.11Grade Unit: ppmIntercept: 16.4 mView all detailsHide details
Identity
- Hole ID
- TP26-046
- Project
- Tempiute
- Commodity
- silver
- Region
- usa_nv
- Reported Region
- usa_nv
- Ticker
- GMTLF
Geometry
- Grade
- 1.11
- Grade Unit
- ppm
- Intercept
- 16.4 m
- From
- 111.6 m
- To
- 128 m
- Hole Depth
- 205.27 m
- Intercept Depth
- 68.6 m
Classification
- Deposit Type
- skarn
- Program
- resource
- Sample Type
- drill
- Group ID
- TP26-046:111.6-128
- Mining Method
- unknown
Location
- Location
- Schofield
- Easting
- 621225
- Northing
- 4165537
- CRS
- NAD83/ UTM Zone 11N Datum
- Azimuth
- 260 °
- Dip
- -50 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- MSA Labs and ALS Laboratories
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Compositing
- Cutoff Grade
- 0.04
- Cutoff Unit
- % WO3
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-21T00:00:00.000Z
Reasoning: This silver grade is very low compared to the project's historical average, indicating it's likely a trace element.
Negative factors
- Grade (1.11 ppm Ag) is significantly below the project's prior average (34.887 g/t Ag, or 34887 ppm) for silver.
Evidence · table
“1.11”
Context: 16.40
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
TP26-046Tempiute · copperGrade: 0.054Grade Unit: %Intercept: 16.4 mView all detailsHide details
Identity
- Hole ID
- TP26-046
- Project
- Tempiute
- Commodity
- copper
- Region
- usa_nv
- Reported Region
- usa_nv
- Ticker
- GMTLF
Geometry
- Grade
- 0.054
- Grade Unit
- %
- Intercept
- 16.4 m
- From
- 111.6 m
- To
- 128 m
- Hole Depth
- 205.27 m
- Intercept Depth
- 68.6 m
Classification
- Deposit Type
- skarn
- Program
- resource
- Sample Type
- drill
- Group ID
- TP26-046:111.6-128
- Mining Method
- unknown
Location
- Location
- Schofield
- Easting
- 621225
- Northing
- 4165537
- CRS
- NAD83/ UTM Zone 11N Datum
- Azimuth
- 260 °
- Dip
- -50 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- MSA Labs and ALS Laboratories
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Compositing
- Cutoff Grade
- 0.04
- Cutoff Unit
- % WO3
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-21T00:00:00.000Z
Reasoning: This copper grade is very low compared to the project's historical average, indicating it's likely a trace element.
Negative factors
- Grade (0.054% Cu) is significantly below the project's prior average (0.157% Cu) for copper.
Evidence · table
“0.054”
Context: 16.40
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
TP26-046Tempiute · tungstenGrade: 0.53Grade Unit: %Intercept: 12.7 mView all detailsHide details
Identity
- Hole ID
- TP26-046
- Project
- Tempiute
- Commodity
- tungsten
- Region
- usa_nv
- Reported Region
- usa_nv
- Ticker
- GMTLF
Geometry
- Grade
- 0.53
- Grade Unit
- %
- Intercept
- 12.7 m
- From
- 170.5 m
- To
- 183.2 m
- Hole Depth
- 205.27 m
- Intercept Depth
- 68.6 m
Classification
- Deposit Type
- skarn
- Program
- resource
- Sample Type
- drill
- Group ID
- TP26-046:170.5-183.2
- Mining Method
- unknown
Location
- Location
- Schofield
- Easting
- 621225
- Northing
- 4165537
- CRS
- NAD83/ UTM Zone 11N Datum
- Azimuth
- 260 °
- Dip
- -50 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- MSA Labs and ALS Laboratories
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Compositing
- Cutoff Grade
- 0.04
- Cutoff Unit
- % WO3
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-21T00:00:00.000Z
Reasoning: This is a high-grade tungsten intercept, significantly above the project average, indicating strong mineralization within the broader interval.
Positive factors
- Grade (0.53% WO3) is above the project's prior average (0.238% WO3) for tungsten and above the moderate threshold (0.5% WO3).
- Intercept length (12.7m) is near the project's prior average (15.5m) for tungsten.
Negative factors
- True thickness is not known.
Evidence · table
“0.53”
Context: 12.70
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
TP26-046Tempiute · zincGrade: 0.11Grade Unit: %Intercept: 12.7 mView all detailsHide details
Identity
- Hole ID
- TP26-046
- Project
- Tempiute
- Commodity
- zinc
- Region
- usa_nv
- Reported Region
- usa_nv
- Ticker
- GMTLF
Geometry
- Grade
- 0.11
- Grade Unit
- %
- Intercept
- 12.7 m
- From
- 170.5 m
- To
- 183.2 m
- Hole Depth
- 205.27 m
- Intercept Depth
- 68.6 m
Classification
- Deposit Type
- skarn
- Program
- resource
- Sample Type
- drill
- Group ID
- TP26-046:170.5-183.2
- Mining Method
- unknown
Location
- Location
- Schofield
- Easting
- 621225
- Northing
- 4165537
- CRS
- NAD83/ UTM Zone 11N Datum
- Azimuth
- 260 °
- Dip
- -50 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- MSA Labs and ALS Laboratories
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Compositing
- Cutoff Grade
- 0.04
- Cutoff Unit
- % WO3
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-21T00:00:00.000Z
Reasoning: This zinc grade is low compared to the project's historical average, indicating it's likely a byproduct.
Negative factors
- Grade (0.11% Zn) is significantly below the project's prior average (0.723% Zn) for zinc.
Evidence · table
“0.11”
Context: 12.70
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
TP26-046Tempiute · silverGrade: 0.61Grade Unit: ppmIntercept: 12.7 mView all detailsHide details
Identity
- Hole ID
- TP26-046
- Project
- Tempiute
- Commodity
- silver
- Region
- usa_nv
- Reported Region
- usa_nv
- Ticker
- GMTLF
Geometry
- Grade
- 0.61
- Grade Unit
- ppm
- Intercept
- 12.7 m
- From
- 170.5 m
- To
- 183.2 m
- Hole Depth
- 205.27 m
- Intercept Depth
- 68.6 m
Classification
- Deposit Type
- skarn
- Program
- resource
- Sample Type
- drill
- Group ID
- TP26-046:170.5-183.2
- Mining Method
- unknown
Location
- Location
- Schofield
- Easting
- 621225
- Northing
- 4165537
- CRS
- NAD83/ UTM Zone 11N Datum
- Azimuth
- 260 °
- Dip
- -50 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- MSA Labs and ALS Laboratories
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Compositing
- Cutoff Grade
- 0.04
- Cutoff Unit
- % WO3
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-21T00:00:00.000Z
Reasoning: This silver grade is very low compared to the project's historical average, indicating it's likely a trace element.
Negative factors
- Grade (0.61 ppm Ag) is significantly below the project's prior average (34.887 g/t Ag, or 34887 ppm) for silver.
Evidence · table
“0.61”
Context: 12.70
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
TP26-046Tempiute · copperGrade: 0.013Grade Unit: %Intercept: 12.7 mView all detailsHide details
Identity
- Hole ID
- TP26-046
- Project
- Tempiute
- Commodity
- copper
- Region
- usa_nv
- Reported Region
- usa_nv
- Ticker
- GMTLF
Geometry
- Grade
- 0.013
- Grade Unit
- %
- Intercept
- 12.7 m
- From
- 170.5 m
- To
- 183.2 m
- Hole Depth
- 205.27 m
- Intercept Depth
- 68.6 m
Classification
- Deposit Type
- skarn
- Program
- resource
- Sample Type
- drill
- Group ID
- TP26-046:170.5-183.2
- Mining Method
- unknown
Location
- Location
- Schofield
- Easting
- 621225
- Northing
- 4165537
- CRS
- NAD83/ UTM Zone 11N Datum
- Azimuth
- 260 °
- Dip
- -50 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- MSA Labs and ALS Laboratories
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Compositing
- Cutoff Grade
- 0.04
- Cutoff Unit
- % WO3
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-21T00:00:00.000Z
Reasoning: This copper grade is very low compared to the project's historical average, indicating it's likely a trace element.
Negative factors
- Grade (0.013% Cu) is significantly below the project's prior average (0.157% Cu) for copper.
Evidence · table
“0.013”
Context: 12.70
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
TP26-046Tempiute · tungstenGrade: 0.49Grade Unit: %Intercept: 5.14 mView all detailsHide details
Identity
- Hole ID
- TP26-046
- Project
- Tempiute
- Commodity
- tungsten
- Region
- usa_nv
- Reported Region
- usa_nv
- Ticker
- GMTLF
Geometry
- Grade
- 0.49
- Grade Unit
- %
- Intercept
- 5.14 m
- From
- 188.36 m
- To
- 193.5 m
- Hole Depth
- 205.27 m
- Intercept Depth
- 68.6 m
Classification
- Deposit Type
- skarn
- Program
- resource
- Sample Type
- drill
- Group ID
- TP26-046:188.36-193.5
- Mining Method
- unknown
Location
- Location
- Schofield
- Easting
- 621225
- Northing
- 4165537
- CRS
- NAD83/ UTM Zone 11N Datum
- Azimuth
- 260 °
- Dip
- -50 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- MSA Labs and ALS Laboratories
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Compositing
- Cutoff Grade
- 0.04
- Cutoff Unit
- % WO3
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-21T00:00:00.000Z
Reasoning: This sub-interval shows a good tungsten grade, significantly above the project average, but over a relatively narrow width.
Positive factors
- Grade (0.49% WO3) is above the project's prior average (0.238% WO3) for tungsten and near the moderate threshold (0.5% WO3).
Negative factors
- Intercept length (5.14m) is below the project's prior average (15.5m) for tungsten.
- True thickness is not known.
Evidence · table
“0.49”
Context: 5.14
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
TP26-046Tempiute · zincGrade: 0.19Grade Unit: %Intercept: 5.14 mView all detailsHide details
Identity
- Hole ID
- TP26-046
- Project
- Tempiute
- Commodity
- zinc
- Region
- usa_nv
- Reported Region
- usa_nv
- Ticker
- GMTLF
Geometry
- Grade
- 0.19
- Grade Unit
- %
- Intercept
- 5.14 m
- From
- 188.36 m
- To
- 193.5 m
- Hole Depth
- 205.27 m
- Intercept Depth
- 68.6 m
Classification
- Deposit Type
- skarn
- Program
- resource
- Sample Type
- drill
- Group ID
- TP26-046:188.36-193.5
- Mining Method
- unknown
Location
- Location
- Schofield
- Easting
- 621225
- Northing
- 4165537
- CRS
- NAD83/ UTM Zone 11N Datum
- Azimuth
- 260 °
- Dip
- -50 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- MSA Labs and ALS Laboratories
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Compositing
- Cutoff Grade
- 0.04
- Cutoff Unit
- % WO3
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-21T00:00:00.000Z
Reasoning: This zinc grade is low compared to the project's historical average, indicating it's likely a byproduct.
Negative factors
- Grade (0.19% Zn) is significantly below the project's prior average (0.723% Zn) for zinc.
Evidence · table
“0.19”
Context: 5.14
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
TP26-046Tempiute · silverGrade: 18.83Grade Unit: ppmIntercept: 5.14 mView all detailsHide details
Identity
- Hole ID
- TP26-046
- Project
- Tempiute
- Commodity
- silver
- Region
- usa_nv
- Reported Region
- usa_nv
- Ticker
- GMTLF
Geometry
- Grade
- 18.83
- Grade Unit
- ppm
- Intercept
- 5.14 m
- From
- 188.36 m
- To
- 193.5 m
- Hole Depth
- 205.27 m
- Intercept Depth
- 68.6 m
Classification
- Deposit Type
- skarn
- Program
- resource
- Sample Type
- drill
- Group ID
- TP26-046:188.36-193.5
- Mining Method
- unknown
Location
- Location
- Schofield
- Easting
- 621225
- Northing
- 4165537
- CRS
- NAD83/ UTM Zone 11N Datum
- Azimuth
- 260 °
- Dip
- -50 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- MSA Labs and ALS Laboratories
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Compositing
- Cutoff Grade
- 0.04
- Cutoff Unit
- % WO3
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-21T00:00:00.000Z
Reasoning: This silver grade is low compared to the project's historical average, indicating it's likely a trace element.
Negative factors
- Grade (18.83 ppm Ag) is significantly below the project's prior average (34.887 g/t Ag, or 34887 ppm) for silver.
Evidence · table
“18.83”
Context: 5.14
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
TP26-046Tempiute · copperGrade: 0.06Grade Unit: %Intercept: 5.14 mView all detailsHide details
Identity
- Hole ID
- TP26-046
- Project
- Tempiute
- Commodity
- copper
- Region
- usa_nv
- Reported Region
- usa_nv
- Ticker
- GMTLF
Geometry
- Grade
- 0.06
- Grade Unit
- %
- Intercept
- 5.14 m
- From
- 188.36 m
- To
- 193.5 m
- Hole Depth
- 205.27 m
- Intercept Depth
- 68.6 m
Classification
- Deposit Type
- skarn
- Program
- resource
- Sample Type
- drill
- Group ID
- TP26-046:188.36-193.5
- Mining Method
- unknown
Location
- Location
- Schofield
- Easting
- 621225
- Northing
- 4165537
- CRS
- NAD83/ UTM Zone 11N Datum
- Azimuth
- 260 °
- Dip
- -50 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- MSA Labs and ALS Laboratories
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Compositing
- Cutoff Grade
- 0.04
- Cutoff Unit
- % WO3
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-21T00:00:00.000Z
Reasoning: This copper grade is very low compared to the project's historical average, indicating it's likely a trace element.
Negative factors
- Grade (0.06% Cu) is significantly below the project's prior average (0.157% Cu) for copper.
Evidence · table
“0.060”
Context: 5.14
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
TP25-001Tempiute · tungstenGrade: 0.32Grade Unit: %Intercept: 2.77 mView all detailsHide details
Identity
- Hole ID
- TP25-001
- Project
- Tempiute
- Commodity
- tungsten
- Region
- usa_nv
- Reported Region
- usa_nv
- Ticker
- GMTLF
Geometry
- Grade
- 0.32
- Grade Unit
- %
- Intercept
- 2.77 m
- From
- 91 m
- To
- 93.77 m
- Hole Depth
- 105.77 m
- Intercept Depth
- 91 m
Classification
- Deposit Type
- skarn
- Program
- exploration
- Sample Type
- drill
- Group ID
- TP25-001:91-93.77
- Mining Method
- unknown
Location
- Location
- Dead-Eye
- Easting
- 620632
- Northing
- 4167854
- CRS
- NAD83/ UTM Zone 11N Datum
- Azimuth
- 64 °
- Dip
- -45 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- MSA Labs and ALS Laboratories
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Compositing
- Cutoff Grade
- 0.1
- Cutoff Unit
- % WO3
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-21T00:00:00.000Z
Reasoning: This intercept shows a good tungsten grade, above the project average, but over a narrow width, typical for exploration drilling.
Positive factors
- Grade (0.32% WO3) is above the project's prior average (0.238% WO3) for tungsten and above the weak threshold (0.25% WO3).
Negative factors
- Intercept length (2.77m) is below the project's prior average (15.5m) for tungsten.
- True thickness is not known.
Evidence · table
“0.32”
Context: 2.77
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
TP25-001Tempiute · zincGrade: 0.31Grade Unit: %Intercept: 2.77 mView all detailsHide details
Identity
- Hole ID
- TP25-001
- Project
- Tempiute
- Commodity
- zinc
- Region
- usa_nv
- Reported Region
- usa_nv
- Ticker
- GMTLF
Geometry
- Grade
- 0.31
- Grade Unit
- %
- Intercept
- 2.77 m
- From
- 91 m
- To
- 93.77 m
- Hole Depth
- 105.77 m
- Intercept Depth
- 91 m
Classification
- Deposit Type
- skarn
- Program
- exploration
- Sample Type
- drill
- Group ID
- TP25-001:91-93.77
- Mining Method
- unknown
Location
- Location
- Dead-Eye
- Easting
- 620632
- Northing
- 4167854
- CRS
- NAD83/ UTM Zone 11N Datum
- Azimuth
- 64 °
- Dip
- -45 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- MSA Labs and ALS Laboratories
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Compositing
- Cutoff Grade
- 0.1
- Cutoff Unit
- % WO3
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-21T00:00:00.000Z
Reasoning: This zinc grade is low compared to the project's historical average, indicating it's likely a byproduct.
Negative factors
- Grade (0.31% Zn) is below the project's prior average (0.723% Zn) for zinc.
Evidence · table
“0.31”
Context: 2.77
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
TP25-001Tempiute · silverGrade: 2.3Grade Unit: ppmIntercept: 2.77 mView all detailsHide details
Identity
- Hole ID
- TP25-001
- Project
- Tempiute
- Commodity
- silver
- Region
- usa_nv
- Reported Region
- usa_nv
- Ticker
- GMTLF
Geometry
- Grade
- 2.3
- Grade Unit
- ppm
- Intercept
- 2.77 m
- From
- 91 m
- To
- 93.77 m
- Hole Depth
- 105.77 m
- Intercept Depth
- 91 m
Classification
- Deposit Type
- skarn
- Program
- exploration
- Sample Type
- drill
- Group ID
- TP25-001:91-93.77
- Mining Method
- unknown
Location
- Location
- Dead-Eye
- Easting
- 620632
- Northing
- 4167854
- CRS
- NAD83/ UTM Zone 11N Datum
- Azimuth
- 64 °
- Dip
- -45 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- MSA Labs and ALS Laboratories
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Compositing
- Cutoff Grade
- 0.1
- Cutoff Unit
- % WO3
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-21T00:00:00.000Z
Reasoning: This silver grade is very low compared to the project's historical average, indicating it's likely a trace element.
Negative factors
- Grade (2.3 ppm Ag) is significantly below the project's prior average (34.887 g/t Ag, or 34887 ppm) for silver.
Evidence · table
“2.30”
Context: 2.77
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
TP25-001Tempiute · copperGrade: 0.02Grade Unit: %Intercept: 2.77 mView all detailsHide details
Identity
- Hole ID
- TP25-001
- Project
- Tempiute
- Commodity
- copper
- Region
- usa_nv
- Reported Region
- usa_nv
- Ticker
- GMTLF
Geometry
- Grade
- 0.02
- Grade Unit
- %
- Intercept
- 2.77 m
- From
- 91 m
- To
- 93.77 m
- Hole Depth
- 105.77 m
- Intercept Depth
- 91 m
Classification
- Deposit Type
- skarn
- Program
- exploration
- Sample Type
- drill
- Group ID
- TP25-001:91-93.77
- Mining Method
- unknown
Location
- Location
- Dead-Eye
- Easting
- 620632
- Northing
- 4167854
- CRS
- NAD83/ UTM Zone 11N Datum
- Azimuth
- 64 °
- Dip
- -45 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- MSA Labs and ALS Laboratories
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Compositing
- Cutoff Grade
- 0.1
- Cutoff Unit
- % WO3
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-21T00:00:00.000Z
Reasoning: This copper grade is very low compared to the project's historical average, indicating it's likely a trace element.
Negative factors
- Grade (0.02% Cu) is significantly below the project's prior average (0.157% Cu) for copper.
Evidence · table
“0.02”
Context: 2.77
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
TP25-003Tempiute · tungstenGrade: 0.15Grade Unit: %Intercept: 3.57 mView all detailsHide details
Identity
- Hole ID
- TP25-003
- Project
- Tempiute
- Commodity
- tungsten
- Region
- usa_nv
- Reported Region
- usa_nv
- Ticker
- GMTLF
Geometry
- Grade
- 0.15
- Grade Unit
- %
- Intercept
- 3.57 m
- From
- 28.85 m
- To
- 32.42 m
- Hole Depth
- 148.49 m
- Intercept Depth
- 28.85 m
Classification
- Deposit Type
- skarn
- Program
- exploration
- Sample Type
- drill
- Group ID
- TP25-003:28.85-32.42
- Mining Method
- unknown
Location
- Location
- Dead-Eye
- Easting
- 620818
- Northing
- 4167416
- CRS
- NAD83/ UTM Zone 11N Datum
- Azimuth
- 79 °
- Dip
- -45 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- MSA Labs and ALS Laboratories
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Compositing
- Cutoff Grade
- 0.1
- Cutoff Unit
- % WO3
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-21T00:00:00.000Z
Reasoning: This intercept shows a low tungsten grade over a narrow width, typical for early exploration drilling.
Negative factors
- Grade (0.15% WO3) is below the project's prior average (0.238% WO3) for tungsten.
- Intercept length (3.57m) is below the project's prior average (15.5m) for tungsten.
- True thickness is not known.
Evidence · table
“0.15”
Context: 3.57
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
TP25-003Tempiute · zincGrade: 0.25Grade Unit: %Intercept: 3.57 mView all detailsHide details
Identity
- Hole ID
- TP25-003
- Project
- Tempiute
- Commodity
- zinc
- Region
- usa_nv
- Reported Region
- usa_nv
- Ticker
- GMTLF
Geometry
- Grade
- 0.25
- Grade Unit
- %
- Intercept
- 3.57 m
- From
- 28.85 m
- To
- 32.42 m
- Hole Depth
- 148.49 m
- Intercept Depth
- 28.85 m
Classification
- Deposit Type
- skarn
- Program
- exploration
- Sample Type
- drill
- Group ID
- TP25-003:28.85-32.42
- Mining Method
- unknown
Location
- Location
- Dead-Eye
- Easting
- 620818
- Northing
- 4167416
- CRS
- NAD83/ UTM Zone 11N Datum
- Azimuth
- 79 °
- Dip
- -45 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- MSA Labs and ALS Laboratories
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Compositing
- Cutoff Grade
- 0.1
- Cutoff Unit
- % WO3
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-21T00:00:00.000Z
Reasoning: This zinc grade is low compared to the project's historical average, indicating it's likely a byproduct.
Negative factors
- Grade (0.25% Zn) is significantly below the project's prior average (0.723% Zn) for zinc.
Evidence · table
“0.25”
Context: 3.57
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
TP25-003Tempiute · silverGrade: 0.86Grade Unit: ppmIntercept: 3.57 mView all detailsHide details
Identity
- Hole ID
- TP25-003
- Project
- Tempiute
- Commodity
- silver
- Region
- usa_nv
- Reported Region
- usa_nv
- Ticker
- GMTLF
Geometry
- Grade
- 0.86
- Grade Unit
- ppm
- Intercept
- 3.57 m
- From
- 28.85 m
- To
- 32.42 m
- Hole Depth
- 148.49 m
- Intercept Depth
- 28.85 m
Classification
- Deposit Type
- skarn
- Program
- exploration
- Sample Type
- drill
- Group ID
- TP25-003:28.85-32.42
- Mining Method
- unknown
Location
- Location
- Dead-Eye
- Easting
- 620818
- Northing
- 4167416
- CRS
- NAD83/ UTM Zone 11N Datum
- Azimuth
- 79 °
- Dip
- -45 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- MSA Labs and ALS Laboratories
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Compositing
- Cutoff Grade
- 0.1
- Cutoff Unit
- % WO3
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-21T00:00:00.000Z
Reasoning: This silver grade is very low compared to the project's historical average, indicating it's likely a trace element.
Negative factors
- Grade (0.86 ppm Ag) is significantly below the project's prior average (34.887 g/t Ag, or 34887 ppm) for silver.
Evidence · table
“0.86”
Context: 3.57
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
TP25-003Tempiute · copperGrade: 0Grade Unit: %Intercept: 3.57 mView all detailsHide details
Identity
- Hole ID
- TP25-003
- Project
- Tempiute
- Commodity
- copper
- Region
- usa_nv
- Reported Region
- usa_nv
- Ticker
- GMTLF
Geometry
- Grade
- 0
- Grade Unit
- %
- Intercept
- 3.57 m
- From
- 28.85 m
- To
- 32.42 m
- Hole Depth
- 148.49 m
- Intercept Depth
- 28.85 m
Classification
- Deposit Type
- skarn
- Program
- exploration
- Sample Type
- drill
- Group ID
- TP25-003:28.85-32.42
- Mining Method
- unknown
Location
- Location
- Dead-Eye
- Easting
- 620818
- Northing
- 4167416
- CRS
- NAD83/ UTM Zone 11N Datum
- Azimuth
- 79 °
- Dip
- -45 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- MSA Labs and ALS Laboratories
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Compositing
- Cutoff Grade
- 0.1
- Cutoff Unit
- % WO3
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-21T00:00:00.000Z
Reasoning: This copper grade is very low compared to the project's historical average, indicating it's likely a trace element.
Negative factors
- Grade (0.0% Cu) is significantly below the project's prior average (0.157% Cu) for copper.
Evidence · table
“0.00”
Context: 3.57
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
TP25-003Tempiute · tungstenGrade: 0.26Grade Unit: %Intercept: 2.73 mView all detailsHide details
Identity
- Hole ID
- TP25-003
- Project
- Tempiute
- Commodity
- tungsten
- Region
- usa_nv
- Reported Region
- usa_nv
- Ticker
- GMTLF
Geometry
- Grade
- 0.26
- Grade Unit
- %
- Intercept
- 2.73 m
- From
- 99.92 m
- To
- 102.65 m
- Hole Depth
- 148.49 m
- Intercept Depth
- 28.85 m
Classification
- Deposit Type
- skarn
- Program
- exploration
- Sample Type
- drill
- Group ID
- TP25-003:99.92-102.65
- Mining Method
- unknown
Location
- Location
- Dead-Eye
- Easting
- 620818
- Northing
- 4167416
- CRS
- NAD83/ UTM Zone 11N Datum
- Azimuth
- 79 °
- Dip
- -45 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- MSA Labs and ALS Laboratories
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Compositing
- Cutoff Grade
- 0.1
- Cutoff Unit
- % WO3
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-21T00:00:00.000Z
Reasoning: This intercept shows a good tungsten grade, above the project average, but over a narrow width, typical for exploration drilling.
Positive factors
- Grade (0.26% WO3) is above the project's prior average (0.238% WO3) for tungsten and above the weak threshold (0.25% WO3).
Negative factors
- Intercept length (2.73m) is below the project's prior average (15.5m) for tungsten.
- True thickness is not known.
Evidence · table
“0.26”
Context: 2.73
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
TP25-003Tempiute · zincGrade: 0.09Grade Unit: %Intercept: 2.73 mView all detailsHide details
Identity
- Hole ID
- TP25-003
- Project
- Tempiute
- Commodity
- zinc
- Region
- usa_nv
- Reported Region
- usa_nv
- Ticker
- GMTLF
Geometry
- Grade
- 0.09
- Grade Unit
- %
- Intercept
- 2.73 m
- From
- 99.92 m
- To
- 102.65 m
- Hole Depth
- 148.49 m
- Intercept Depth
- 28.85 m
Classification
- Deposit Type
- skarn
- Program
- exploration
- Sample Type
- drill
- Group ID
- TP25-003:99.92-102.65
- Mining Method
- unknown
Location
- Location
- Dead-Eye
- Easting
- 620818
- Northing
- 4167416
- CRS
- NAD83/ UTM Zone 11N Datum
- Azimuth
- 79 °
- Dip
- -45 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- MSA Labs and ALS Laboratories
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Compositing
- Cutoff Grade
- 0.1
- Cutoff Unit
- % WO3
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-21T00:00:00.000Z
Reasoning: This zinc grade is low compared to the project's historical average, indicating it's likely a byproduct.
Negative factors
- Grade (0.09% Zn) is significantly below the project's prior average (0.723% Zn) for zinc.
Evidence · table
“0.09”
Context: 2.73
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
TP25-003Tempiute · silverGrade: 0.82Grade Unit: ppmIntercept: 2.73 mView all detailsHide details
Identity
- Hole ID
- TP25-003
- Project
- Tempiute
- Commodity
- silver
- Region
- usa_nv
- Reported Region
- usa_nv
- Ticker
- GMTLF
Geometry
- Grade
- 0.82
- Grade Unit
- ppm
- Intercept
- 2.73 m
- From
- 99.92 m
- To
- 102.65 m
- Hole Depth
- 148.49 m
- Intercept Depth
- 28.85 m
Classification
- Deposit Type
- skarn
- Program
- exploration
- Sample Type
- drill
- Group ID
- TP25-003:99.92-102.65
- Mining Method
- unknown
Location
- Location
- Dead-Eye
- Easting
- 620818
- Northing
- 4167416
- CRS
- NAD83/ UTM Zone 11N Datum
- Azimuth
- 79 °
- Dip
- -45 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- MSA Labs and ALS Laboratories
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Compositing
- Cutoff Grade
- 0.1
- Cutoff Unit
- % WO3
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-21T00:00:00.000Z
Reasoning: This silver grade is very low compared to the project's historical average, indicating it's likely a trace element.
Negative factors
- Grade (0.82 ppm Ag) is significantly below the project's prior average (34.887 g/t Ag, or 34887 ppm) for silver.
Evidence · table
“0.82”
Context: 2.73
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
TP25-003Tempiute · copperGrade: 0Grade Unit: %Intercept: 2.73 mView all detailsHide details
Identity
- Hole ID
- TP25-003
- Project
- Tempiute
- Commodity
- copper
- Region
- usa_nv
- Reported Region
- usa_nv
- Ticker
- GMTLF
Geometry
- Grade
- 0
- Grade Unit
- %
- Intercept
- 2.73 m
- From
- 99.92 m
- To
- 102.65 m
- Hole Depth
- 148.49 m
- Intercept Depth
- 28.85 m
Classification
- Deposit Type
- skarn
- Program
- exploration
- Sample Type
- drill
- Group ID
- TP25-003:99.92-102.65
- Mining Method
- unknown
Location
- Location
- Dead-Eye
- Easting
- 620818
- Northing
- 4167416
- CRS
- NAD83/ UTM Zone 11N Datum
- Azimuth
- 79 °
- Dip
- -45 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- MSA Labs and ALS Laboratories
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Compositing
- Cutoff Grade
- 0.1
- Cutoff Unit
- % WO3
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-21T00:00:00.000Z
Reasoning: This copper grade is very low compared to the project's historical average, indicating it's likely a trace element.
Negative factors
- Grade (0.0% Cu) is significantly below the project's prior average (0.157% Cu) for copper.
Evidence · table
“0.00”
Context: 2.73
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
TP25-004Tempiute · tungstenGrade: 0.12Grade Unit: %Intercept: 2.93 mView all detailsHide details
Identity
- Hole ID
- TP25-004
- Project
- Tempiute
- Commodity
- tungsten
- Region
- usa_nv
- Reported Region
- usa_nv
- Ticker
- GMTLF
Geometry
- Grade
- 0.12
- Grade Unit
- %
- Intercept
- 2.93 m
- From
- 122.47 m
- To
- 125.4 m
- Hole Depth
- 178.31 m
- Intercept Depth
- 122.47 m
Classification
- Deposit Type
- skarn
- Program
- exploration
- Sample Type
- drill
- Group ID
- TP25-004:122.47-125.4
- Mining Method
- unknown
Location
- Location
- Dead-Eye
- Easting
- 620817
- Northing
- 4167415
- CRS
- NAD83/ UTM Zone 11N Datum
- Azimuth
- 82 °
- Dip
- -72 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- MSA Labs and ALS Laboratories
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Compositing
- Cutoff Grade
- 0.1
- Cutoff Unit
- % WO3
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-21T00:00:00.000Z
Reasoning: This intercept shows a low tungsten grade over a narrow width, typical for early exploration drilling.
Negative factors
- Grade (0.12% WO3) is below the project's prior average (0.238% WO3) for tungsten.
- Intercept length (2.93m) is below the project's prior average (15.5m) for tungsten.
- True thickness is not known.
Evidence · table
“0.12”
Context: 2.93
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
TP25-004Tempiute · zincGrade: 0.05Grade Unit: %Intercept: 2.93 mView all detailsHide details
Identity
- Hole ID
- TP25-004
- Project
- Tempiute
- Commodity
- zinc
- Region
- usa_nv
- Reported Region
- usa_nv
- Ticker
- GMTLF
Geometry
- Grade
- 0.05
- Grade Unit
- %
- Intercept
- 2.93 m
- From
- 122.47 m
- To
- 125.4 m
- Hole Depth
- 178.31 m
- Intercept Depth
- 122.47 m
Classification
- Deposit Type
- skarn
- Program
- exploration
- Sample Type
- drill
- Group ID
- TP25-004:122.47-125.4
- Mining Method
- unknown
Location
- Location
- Dead-Eye
- Easting
- 620817
- Northing
- 4167415
- CRS
- NAD83/ UTM Zone 11N Datum
- Azimuth
- 82 °
- Dip
- -72 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- MSA Labs and ALS Laboratories
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Compositing
- Cutoff Grade
- 0.1
- Cutoff Unit
- % WO3
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-21T00:00:00.000Z
Reasoning: This zinc grade is low compared to the project's historical average, indicating it's likely a byproduct.
Negative factors
- Grade (0.05% Zn) is significantly below the project's prior average (0.723% Zn) for zinc.
Evidence · table
“0.05”
Context: 2.93
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
TP25-004Tempiute · silverGrade: 0.25Grade Unit: ppmIntercept: 2.93 mView all detailsHide details
Identity
- Hole ID
- TP25-004
- Project
- Tempiute
- Commodity
- silver
- Region
- usa_nv
- Reported Region
- usa_nv
- Ticker
- GMTLF
Geometry
- Grade
- 0.25
- Grade Unit
- ppm
- Intercept
- 2.93 m
- From
- 122.47 m
- To
- 125.4 m
- Hole Depth
- 178.31 m
- Intercept Depth
- 122.47 m
Classification
- Deposit Type
- skarn
- Program
- exploration
- Sample Type
- drill
- Group ID
- TP25-004:122.47-125.4
- Mining Method
- unknown
Location
- Location
- Dead-Eye
- Easting
- 620817
- Northing
- 4167415
- CRS
- NAD83/ UTM Zone 11N Datum
- Azimuth
- 82 °
- Dip
- -72 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- MSA Labs and ALS Laboratories
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Compositing
- Cutoff Grade
- 0.1
- Cutoff Unit
- % WO3
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-21T00:00:00.000Z
Reasoning: This silver grade is very low compared to the project's historical average, indicating it's likely a trace element.
Negative factors
- Grade (0.25 ppm Ag) is significantly below the project's prior average (34.887 g/t Ag, or 34887 ppm) for silver.
Evidence · table
“0.25”
Context: 2.93
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
TP25-004Tempiute · copperGrade: 0Grade Unit: %Intercept: 2.93 mView all detailsHide details
Identity
- Hole ID
- TP25-004
- Project
- Tempiute
- Commodity
- copper
- Region
- usa_nv
- Reported Region
- usa_nv
- Ticker
- GMTLF
Geometry
- Grade
- 0
- Grade Unit
- %
- Intercept
- 2.93 m
- From
- 122.47 m
- To
- 125.4 m
- Hole Depth
- 178.31 m
- Intercept Depth
- 122.47 m
Classification
- Deposit Type
- skarn
- Program
- exploration
- Sample Type
- drill
- Group ID
- TP25-004:122.47-125.4
- Mining Method
- unknown
Location
- Location
- Dead-Eye
- Easting
- 620817
- Northing
- 4167415
- CRS
- NAD83/ UTM Zone 11N Datum
- Azimuth
- 82 °
- Dip
- -72 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- MSA Labs and ALS Laboratories
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Compositing
- Cutoff Grade
- 0.1
- Cutoff Unit
- % WO3
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-21T00:00:00.000Z
Reasoning: This copper grade is very low compared to the project's historical average, indicating it's likely a trace element.
Negative factors
- Grade (0.0% Cu) is significantly below the project's prior average (0.157% Cu) for copper.
Evidence · table
“0.00”
Context: 2.93
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
TP25-004Tempiute · tungstenGrade: 0.17Grade Unit: %Intercept: 3.27 mView all detailsHide details
Identity
- Hole ID
- TP25-004
- Project
- Tempiute
- Commodity
- tungsten
- Region
- usa_nv
- Reported Region
- usa_nv
- Ticker
- GMTLF
Geometry
- Grade
- 0.17
- Grade Unit
- %
- Intercept
- 3.27 m
- From
- 130.4 m
- To
- 133.67 m
- Hole Depth
- 178.31 m
- Intercept Depth
- 122.47 m
Classification
- Deposit Type
- skarn
- Program
- exploration
- Sample Type
- drill
- Group ID
- TP25-004:130.4-133.67
- Mining Method
- unknown
Location
- Location
- Dead-Eye
- Easting
- 620817
- Northing
- 4167415
- CRS
- NAD83/ UTM Zone 11N Datum
- Azimuth
- 82 °
- Dip
- -72 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- MSA Labs and ALS Laboratories
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Compositing
- Cutoff Grade
- 0.1
- Cutoff Unit
- % WO3
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-21T00:00:00.000Z
Reasoning: This intercept shows a low tungsten grade over a narrow width, typical for early exploration drilling.
Negative factors
- Grade (0.17% WO3) is below the project's prior average (0.238% WO3) for tungsten.
- Intercept length (3.27m) is below the project's prior average (15.5m) for tungsten.
- True thickness is not known.
Evidence · table
“0.17”
Context: 3.27
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
TP25-004Tempiute · zincGrade: 0.46Grade Unit: %Intercept: 3.27 mView all detailsHide details
Identity
- Hole ID
- TP25-004
- Project
- Tempiute
- Commodity
- zinc
- Region
- usa_nv
- Reported Region
- usa_nv
- Ticker
- GMTLF
Geometry
- Grade
- 0.46
- Grade Unit
- %
- Intercept
- 3.27 m
- From
- 130.4 m
- To
- 133.67 m
- Hole Depth
- 178.31 m
- Intercept Depth
- 122.47 m
Classification
- Deposit Type
- skarn
- Program
- exploration
- Sample Type
- drill
- Group ID
- TP25-004:130.4-133.67
- Mining Method
- unknown
Location
- Location
- Dead-Eye
- Easting
- 620817
- Northing
- 4167415
- CRS
- NAD83/ UTM Zone 11N Datum
- Azimuth
- 82 °
- Dip
- -72 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- MSA Labs and ALS Laboratories
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Compositing
- Cutoff Grade
- 0.1
- Cutoff Unit
- % WO3
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-21T00:00:00.000Z
Reasoning: This zinc grade is low compared to the project's historical average, indicating it's likely a byproduct.
Negative factors
- Grade (0.46% Zn) is below the project's prior average (0.723% Zn) for zinc.
Evidence · table
“0.46”
Context: 3.27
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
TP25-004Tempiute · silverGrade: 20.38Grade Unit: ppmIntercept: 3.27 mView all detailsHide details
Identity
- Hole ID
- TP25-004
- Project
- Tempiute
- Commodity
- silver
- Region
- usa_nv
- Reported Region
- usa_nv
- Ticker
- GMTLF
Geometry
- Grade
- 20.38
- Grade Unit
- ppm
- Intercept
- 3.27 m
- From
- 130.4 m
- To
- 133.67 m
- Hole Depth
- 178.31 m
- Intercept Depth
- 122.47 m
Classification
- Deposit Type
- skarn
- Program
- exploration
- Sample Type
- drill
- Group ID
- TP25-004:130.4-133.67
- Mining Method
- unknown
Location
- Location
- Dead-Eye
- Easting
- 620817
- Northing
- 4167415
- CRS
- NAD83/ UTM Zone 11N Datum
- Azimuth
- 82 °
- Dip
- -72 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- MSA Labs and ALS Laboratories
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Compositing
- Cutoff Grade
- 0.1
- Cutoff Unit
- % WO3
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-21T00:00:00.000Z
Reasoning: This silver grade is low compared to the project's historical average, indicating it's likely a trace element.
Negative factors
- Grade (20.38 ppm Ag) is significantly below the project's prior average (34.887 g/t Ag, or 34887 ppm) for silver.
Evidence · table
“20.38”
Context: 3.27
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
TP25-004Tempiute · copperGrade: 0Grade Unit: %Intercept: 3.27 mView all detailsHide details
Identity
- Hole ID
- TP25-004
- Project
- Tempiute
- Commodity
- copper
- Region
- usa_nv
- Reported Region
- usa_nv
- Ticker
- GMTLF
Geometry
- Grade
- 0
- Grade Unit
- %
- Intercept
- 3.27 m
- From
- 130.4 m
- To
- 133.67 m
- Hole Depth
- 178.31 m
- Intercept Depth
- 122.47 m
Classification
- Deposit Type
- skarn
- Program
- exploration
- Sample Type
- drill
- Group ID
- TP25-004:130.4-133.67
- Mining Method
- unknown
Location
- Location
- Dead-Eye
- Easting
- 620817
- Northing
- 4167415
- CRS
- NAD83/ UTM Zone 11N Datum
- Azimuth
- 82 °
- Dip
- -72 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- MSA Labs and ALS Laboratories
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Compositing
- Cutoff Grade
- 0.1
- Cutoff Unit
- % WO3
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-21T00:00:00.000Z
Reasoning: This copper grade is very low compared to the project's historical average, indicating it's likely a trace element.
Negative factors
- Grade (0.0% Cu) is significantly below the project's prior average (0.157% Cu) for copper.
Evidence · table
“0.00”
Context: 3.27
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
TP25-004Tempiute · tungstenGrade: 0.71Grade Unit: %Intercept: 4.31 mView all detailsHide details
Identity
- Hole ID
- TP25-004
- Project
- Tempiute
- Commodity
- tungsten
- Region
- usa_nv
- Reported Region
- usa_nv
- Ticker
- GMTLF
Geometry
- Grade
- 0.71
- Grade Unit
- %
- Intercept
- 4.31 m
- From
- 144.21 m
- To
- 148.52 m
- Hole Depth
- 178.31 m
- Intercept Depth
- 122.47 m
Classification
- Deposit Type
- skarn
- Program
- exploration
- Sample Type
- drill
- Group ID
- TP25-004:144.21-148.52
- Mining Method
- unknown
Location
- Location
- Dead-Eye
- Easting
- 620817
- Northing
- 4167415
- CRS
- NAD83/ UTM Zone 11N Datum
- Azimuth
- 82 °
- Dip
- -72 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- MSA Labs and ALS Laboratories
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Compositing
- Cutoff Grade
- 0.1
- Cutoff Unit
- % WO3
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-21T00:00:00.000Z
Reasoning: This intercept shows a high tungsten grade, significantly above the project average, but over a relatively narrow width.
Positive factors
- Grade (0.71% WO3) is above the project's prior average (0.238% WO3) for tungsten and above the moderate threshold (0.5% WO3).
Negative factors
- Intercept length (4.31m) is below the project's prior average (15.5m) for tungsten.
- True thickness is not known.
Evidence · table
“0.71”
Context: 4.31
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
TP25-004Tempiute · zincGrade: 0.37Grade Unit: %Intercept: 4.31 mView all detailsHide details
Identity
- Hole ID
- TP25-004
- Project
- Tempiute
- Commodity
- zinc
- Region
- usa_nv
- Reported Region
- usa_nv
- Ticker
- GMTLF
Geometry
- Grade
- 0.37
- Grade Unit
- %
- Intercept
- 4.31 m
- From
- 144.21 m
- To
- 148.52 m
- Hole Depth
- 178.31 m
- Intercept Depth
- 122.47 m
Classification
- Deposit Type
- skarn
- Program
- exploration
- Sample Type
- drill
- Group ID
- TP25-004:144.21-148.52
- Mining Method
- unknown
Location
- Location
- Dead-Eye
- Easting
- 620817
- Northing
- 4167415
- CRS
- NAD83/ UTM Zone 11N Datum
- Azimuth
- 82 °
- Dip
- -72 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- MSA Labs and ALS Laboratories
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Compositing
- Cutoff Grade
- 0.1
- Cutoff Unit
- % WO3
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-21T00:00:00.000Z
Reasoning: This zinc grade is low compared to the project's historical average, indicating it's likely a byproduct.
Negative factors
- Grade (0.37% Zn) is below the project's prior average (0.723% Zn) for zinc.
Evidence · table
“0.37”
Context: 4.31
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
TP25-004Tempiute · silverGrade: 28.4Grade Unit: ppmIntercept: 4.31 mView all detailsHide details
Identity
- Hole ID
- TP25-004
- Project
- Tempiute
- Commodity
- silver
- Region
- usa_nv
- Reported Region
- usa_nv
- Ticker
- GMTLF
Geometry
- Grade
- 28.4
- Grade Unit
- ppm
- Intercept
- 4.31 m
- From
- 144.21 m
- To
- 148.52 m
- Hole Depth
- 178.31 m
- Intercept Depth
- 122.47 m
Classification
- Deposit Type
- skarn
- Program
- exploration
- Sample Type
- drill
- Group ID
- TP25-004:144.21-148.52
- Mining Method
- unknown
Location
- Location
- Dead-Eye
- Easting
- 620817
- Northing
- 4167415
- CRS
- NAD83/ UTM Zone 11N Datum
- Azimuth
- 82 °
- Dip
- -72 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- MSA Labs and ALS Laboratories
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Compositing
- Cutoff Grade
- 0.1
- Cutoff Unit
- % WO3
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-21T00:00:00.000Z
Reasoning: This silver grade is low compared to the project's historical average, indicating it's likely a trace element.
Negative factors
- Grade (28.4 ppm Ag) is significantly below the project's prior average (34.887 g/t Ag, or 34887 ppm) for silver.
Evidence · table
“28.40”
Context: 4.31
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
TP25-004Tempiute · copperGrade: 0.02Grade Unit: %Intercept: 4.31 mView all detailsHide details
Identity
- Hole ID
- TP25-004
- Project
- Tempiute
- Commodity
- copper
- Region
- usa_nv
- Reported Region
- usa_nv
- Ticker
- GMTLF
Geometry
- Grade
- 0.02
- Grade Unit
- %
- Intercept
- 4.31 m
- From
- 144.21 m
- To
- 148.52 m
- Hole Depth
- 178.31 m
- Intercept Depth
- 122.47 m
Classification
- Deposit Type
- skarn
- Program
- exploration
- Sample Type
- drill
- Group ID
- TP25-004:144.21-148.52
- Mining Method
- unknown
Location
- Location
- Dead-Eye
- Easting
- 620817
- Northing
- 4167415
- CRS
- NAD83/ UTM Zone 11N Datum
- Azimuth
- 82 °
- Dip
- -72 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- MSA Labs and ALS Laboratories
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Compositing
- Cutoff Grade
- 0.1
- Cutoff Unit
- % WO3
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-21T00:00:00.000Z
Reasoning: This copper grade is very low compared to the project's historical average, indicating it's likely a trace element.
Negative factors
- Grade (0.02% Cu) is significantly below the project's prior average (0.157% Cu) for copper.
Evidence · table
“0.02”
Context: 4.31
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
TP25-007Tempiute · tungstenGrade: 0.27Grade Unit: %Intercept: 2.4 mView all detailsHide details
Identity
- Hole ID
- TP25-007
- Project
- Tempiute
- Commodity
- tungsten
- Region
- usa_nv
- Reported Region
- usa_nv
- Ticker
- GMTLF
Geometry
- Grade
- 0.27
- Grade Unit
- %
- Intercept
- 2.4 m
- From
- 23.2 m
- To
- 25.6 m
- Hole Depth
- 86.56 m
- Intercept Depth
- 23.2 m
Classification
- Deposit Type
- skarn
- Program
- exploration
- Sample Type
- drill
- Group ID
- TP25-007:23.2-25.6
- Mining Method
- unknown
Location
- Location
- Dead-Eye
- Easting
- 620693
- Northing
- 4167613
- CRS
- NAD83/ UTM Zone 11N Datum
- Azimuth
- 82 °
- Dip
- -45 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- MSA Labs and ALS Laboratories
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Compositing
- Cutoff Grade
- 0.1
- Cutoff Unit
- % WO3
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-21T00:00:00.000Z
Reasoning: This intercept shows a good tungsten grade, above the project average, but over a narrow width, typical for exploration drilling.
Positive factors
- Grade (0.27% WO3) is above the project's prior average (0.238% WO3) for tungsten and above the weak threshold (0.25% WO3).
Negative factors
- Intercept length (2.4m) is below the project's prior average (15.5m) for tungsten.
- True thickness is not known.
Evidence · table
“0.27”
Context: 2.40
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
TP25-007Tempiute · zincGrade: 0.06Grade Unit: %Intercept: 2.4 mView all detailsHide details
Identity
- Hole ID
- TP25-007
- Project
- Tempiute
- Commodity
- zinc
- Region
- usa_nv
- Reported Region
- usa_nv
- Ticker
- GMTLF
Geometry
- Grade
- 0.06
- Grade Unit
- %
- Intercept
- 2.4 m
- From
- 23.2 m
- To
- 25.6 m
- Hole Depth
- 86.56 m
- Intercept Depth
- 23.2 m
Classification
- Deposit Type
- skarn
- Program
- exploration
- Sample Type
- drill
- Group ID
- TP25-007:23.2-25.6
- Mining Method
- unknown
Location
- Location
- Dead-Eye
- Easting
- 620693
- Northing
- 4167613
- CRS
- NAD83/ UTM Zone 11N Datum
- Azimuth
- 82 °
- Dip
- -45 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- MSA Labs and ALS Laboratories
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Compositing
- Cutoff Grade
- 0.1
- Cutoff Unit
- % WO3
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-21T00:00:00.000Z
Reasoning: This zinc grade is low compared to the project's historical average, indicating it's likely a byproduct.
Negative factors
- Grade (0.06% Zn) is significantly below the project's prior average (0.723% Zn) for zinc.
Evidence · table
“0.06”
Context: 2.40
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
TP25-007Tempiute · silverGrade: 3.16Grade Unit: ppmIntercept: 2.4 mView all detailsHide details
Identity
- Hole ID
- TP25-007
- Project
- Tempiute
- Commodity
- silver
- Region
- usa_nv
- Reported Region
- usa_nv
- Ticker
- GMTLF
Geometry
- Grade
- 3.16
- Grade Unit
- ppm
- Intercept
- 2.4 m
- From
- 23.2 m
- To
- 25.6 m
- Hole Depth
- 86.56 m
- Intercept Depth
- 23.2 m
Classification
- Deposit Type
- skarn
- Program
- exploration
- Sample Type
- drill
- Group ID
- TP25-007:23.2-25.6
- Mining Method
- unknown
Location
- Location
- Dead-Eye
- Easting
- 620693
- Northing
- 4167613
- CRS
- NAD83/ UTM Zone 11N Datum
- Azimuth
- 82 °
- Dip
- -45 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- MSA Labs and ALS Laboratories
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Compositing
- Cutoff Grade
- 0.1
- Cutoff Unit
- % WO3
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-21T00:00:00.000Z
Reasoning: This silver grade is very low compared to the project's historical average, indicating it's likely a trace element.
Negative factors
- Grade (3.16 ppm Ag) is significantly below the project's prior average (34.887 g/t Ag, or 34887 ppm) for silver.
Evidence · table
“3.16”
Context: 2.40
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
TP25-007Tempiute · copperGrade: 0Grade Unit: %Intercept: 2.4 mView all detailsHide details
Identity
- Hole ID
- TP25-007
- Project
- Tempiute
- Commodity
- copper
- Region
- usa_nv
- Reported Region
- usa_nv
- Ticker
- GMTLF
Geometry
- Grade
- 0
- Grade Unit
- %
- Intercept
- 2.4 m
- From
- 23.2 m
- To
- 25.6 m
- Hole Depth
- 86.56 m
- Intercept Depth
- 23.2 m
Classification
- Deposit Type
- skarn
- Program
- exploration
- Sample Type
- drill
- Group ID
- TP25-007:23.2-25.6
- Mining Method
- unknown
Location
- Location
- Dead-Eye
- Easting
- 620693
- Northing
- 4167613
- CRS
- NAD83/ UTM Zone 11N Datum
- Azimuth
- 82 °
- Dip
- -45 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- MSA Labs and ALS Laboratories
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Compositing
- Cutoff Grade
- 0.1
- Cutoff Unit
- % WO3
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-21T00:00:00.000Z
Reasoning: This copper grade is very low compared to the project's historical average, indicating it's likely a trace element.
Negative factors
- Grade (0.0% Cu) is significantly below the project's prior average (0.157% Cu) for copper.
Evidence · table
“0.00”
Context: 2.40
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
TP25-010Tempiute · tungstenGrade: 0.1Grade Unit: %Intercept: 3.1 mView all detailsHide details
Identity
- Hole ID
- TP25-010
- Project
- Tempiute
- Commodity
- tungsten
- Region
- usa_nv
- Reported Region
- usa_nv
- Ticker
- GMTLF
Geometry
- Grade
- 0.1
- Grade Unit
- %
- Intercept
- 3.1 m
- From
- 28.1 m
- To
- 31.2 m
- Hole Depth
- 132.44 m
- Intercept Depth
- 28.1 m
Classification
- Deposit Type
- skarn
- Program
- exploration
- Sample Type
- drill
- Group ID
- TP25-010:28.1-31.2
- Mining Method
- unknown
Location
- Location
- Dead-Eye
- Easting
- 620685
- Northing
- 4167733
- CRS
- NAD83/ UTM Zone 11N Datum
- Azimuth
- 65 °
- Dip
- -76 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- MSA Labs and ALS Laboratories
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Compositing
- Cutoff Grade
- 0.1
- Cutoff Unit
- % WO3
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-21T00:00:00.000Z
Reasoning: This intercept shows a low tungsten grade over a narrow width, typical for early exploration drilling.
Negative factors
- Grade (0.1% WO3) is below the project's prior average (0.238% WO3) for tungsten.
- Intercept length (3.1m) is below the project's prior average (15.5m) for tungsten.
- True thickness is not known.
Evidence · table
“0.10”
Context: 3.10
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
TP25-010Tempiute · zincGrade: 0.04Grade Unit: %Intercept: 3.1 mView all detailsHide details
Identity
- Hole ID
- TP25-010
- Project
- Tempiute
- Commodity
- zinc
- Region
- usa_nv
- Reported Region
- usa_nv
- Ticker
- GMTLF
Geometry
- Grade
- 0.04
- Grade Unit
- %
- Intercept
- 3.1 m
- From
- 28.1 m
- To
- 31.2 m
- Hole Depth
- 132.44 m
- Intercept Depth
- 28.1 m
Classification
- Deposit Type
- skarn
- Program
- exploration
- Sample Type
- drill
- Group ID
- TP25-010:28.1-31.2
- Mining Method
- unknown
Location
- Location
- Dead-Eye
- Easting
- 620685
- Northing
- 4167733
- CRS
- NAD83/ UTM Zone 11N Datum
- Azimuth
- 65 °
- Dip
- -76 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- MSA Labs and ALS Laboratories
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Compositing
- Cutoff Grade
- 0.1
- Cutoff Unit
- % WO3
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-21T00:00:00.000Z
Reasoning: This zinc grade is low compared to the project's historical average, indicating it's likely a byproduct.
Negative factors
- Grade (0.04% Zn) is significantly below the project's prior average (0.723% Zn) for zinc.
Evidence · table
“0.04”
Context: 3.10
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
TP25-010Tempiute · silverGrade: 0.03Grade Unit: ppmIntercept: 3.1 mView all detailsHide details
Identity
- Hole ID
- TP25-010
- Project
- Tempiute
- Commodity
- silver
- Region
- usa_nv
- Reported Region
- usa_nv
- Ticker
- GMTLF
Geometry
- Grade
- 0.03
- Grade Unit
- ppm
- Intercept
- 3.1 m
- From
- 28.1 m
- To
- 31.2 m
- Hole Depth
- 132.44 m
- Intercept Depth
- 28.1 m
Classification
- Deposit Type
- skarn
- Program
- exploration
- Sample Type
- drill
- Group ID
- TP25-010:28.1-31.2
- Mining Method
- unknown
Location
- Location
- Dead-Eye
- Easting
- 620685
- Northing
- 4167733
- CRS
- NAD83/ UTM Zone 11N Datum
- Azimuth
- 65 °
- Dip
- -76 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- MSA Labs and ALS Laboratories
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Compositing
- Cutoff Grade
- 0.1
- Cutoff Unit
- % WO3
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-21T00:00:00.000Z
Reasoning: This silver grade is very low compared to the project's historical average, indicating it's likely a trace element.
Negative factors
- Grade (0.03 ppm Ag) is significantly below the project's prior average (34.887 g/t Ag, or 34887 ppm) for silver.
Evidence · table
“0.03”
Context: 3.10
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
TP25-010Tempiute · copperGrade: 0Grade Unit: %Intercept: 3.1 mView all detailsHide details
Identity
- Hole ID
- TP25-010
- Project
- Tempiute
- Commodity
- copper
- Region
- usa_nv
- Reported Region
- usa_nv
- Ticker
- GMTLF
Geometry
- Grade
- 0
- Grade Unit
- %
- Intercept
- 3.1 m
- From
- 28.1 m
- To
- 31.2 m
- Hole Depth
- 132.44 m
- Intercept Depth
- 28.1 m
Classification
- Deposit Type
- skarn
- Program
- exploration
- Sample Type
- drill
- Group ID
- TP25-010:28.1-31.2
- Mining Method
- unknown
Location
- Location
- Dead-Eye
- Easting
- 620685
- Northing
- 4167733
- CRS
- NAD83/ UTM Zone 11N Datum
- Azimuth
- 65 °
- Dip
- -76 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- MSA Labs and ALS Laboratories
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Compositing
- Cutoff Grade
- 0.1
- Cutoff Unit
- % WO3
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-21T00:00:00.000Z
Reasoning: This copper grade is very low compared to the project's historical average, indicating it's likely a trace element.
Negative factors
- Grade (0.0% Cu) is significantly below the project's prior average (0.157% Cu) for copper.
Evidence · table
“0.00”
Context: 3.10
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
TP25-012Tempiute · tungstenGrade: 0.22Grade Unit: %Intercept: 3.74 mView all detailsHide details
Identity
- Hole ID
- TP25-012
- Project
- Tempiute
- Commodity
- tungsten
- Region
- usa_nv
- Reported Region
- usa_nv
- Ticker
- GMTLF
Geometry
- Grade
- 0.22
- Grade Unit
- %
- Intercept
- 3.74 m
- From
- 107.46 m
- To
- 111.2 m
- Hole Depth
- 129.24 m
- Intercept Depth
- 107.46 m
Classification
- Deposit Type
- skarn
- Program
- exploration
- Sample Type
- drill
- Group ID
- TP25-012:107.46-111.2
- Mining Method
- unknown
Location
- Location
- Dead-Eye
- Easting
- 620783
- Northing
- 4167449
- CRS
- NAD83/ UTM Zone 11N Datum
- Azimuth
- 70 °
- Dip
- -45 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- MSA Labs and ALS Laboratories
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Compositing
- Cutoff Grade
- 0.1
- Cutoff Unit
- % WO3
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-21T00:00:00.000Z
Reasoning: This intercept shows a low tungsten grade over a narrow width, typical for early exploration drilling.
Negative factors
- Grade (0.22% WO3) is below the project's prior average (0.238% WO3) for tungsten.
- Intercept length (3.74m) is below the project's prior average (15.5m) for tungsten.
- True thickness is not known.
Evidence · table
“0.22”
Context: 3.74
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
TP25-012Tempiute · zincGrade: 0.21Grade Unit: %Intercept: 3.74 mView all detailsHide details
Identity
- Hole ID
- TP25-012
- Project
- Tempiute
- Commodity
- zinc
- Region
- usa_nv
- Reported Region
- usa_nv
- Ticker
- GMTLF
Geometry
- Grade
- 0.21
- Grade Unit
- %
- Intercept
- 3.74 m
- From
- 107.46 m
- To
- 111.2 m
- Hole Depth
- 129.24 m
- Intercept Depth
- 107.46 m
Classification
- Deposit Type
- skarn
- Program
- exploration
- Sample Type
- drill
- Group ID
- TP25-012:107.46-111.2
- Mining Method
- unknown
Location
- Location
- Dead-Eye
- Easting
- 620783
- Northing
- 4167449
- CRS
- NAD83/ UTM Zone 11N Datum
- Azimuth
- 70 °
- Dip
- -45 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- MSA Labs and ALS Laboratories
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Compositing
- Cutoff Grade
- 0.1
- Cutoff Unit
- % WO3
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-21T00:00:00.000Z
Reasoning: This zinc grade is low compared to the project's historical average, indicating it's likely a byproduct.
Negative factors
- Grade (0.21% Zn) is significantly below the project's prior average (0.723% Zn) for zinc.
Evidence · table
“0.21”
Context: 3.74
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
TP25-012Tempiute · silverGrade: 5.12Grade Unit: ppmIntercept: 3.74 mView all detailsHide details
Identity
- Hole ID
- TP25-012
- Project
- Tempiute
- Commodity
- silver
- Region
- usa_nv
- Reported Region
- usa_nv
- Ticker
- GMTLF
Geometry
- Grade
- 5.12
- Grade Unit
- ppm
- Intercept
- 3.74 m
- From
- 107.46 m
- To
- 111.2 m
- Hole Depth
- 129.24 m
- Intercept Depth
- 107.46 m
Classification
- Deposit Type
- skarn
- Program
- exploration
- Sample Type
- drill
- Group ID
- TP25-012:107.46-111.2
- Mining Method
- unknown
Location
- Location
- Dead-Eye
- Easting
- 620783
- Northing
- 4167449
- CRS
- NAD83/ UTM Zone 11N Datum
- Azimuth
- 70 °
- Dip
- -45 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- MSA Labs and ALS Laboratories
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Compositing
- Cutoff Grade
- 0.1
- Cutoff Unit
- % WO3
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-21T00:00:00.000Z
Reasoning: This silver grade is low compared to the project's historical average, indicating it's likely a trace element.
Negative factors
- Grade (5.12 ppm Ag) is significantly below the project's prior average (34.887 g/t Ag, or 34887 ppm) for silver.
Evidence · table
“5.12”
Context: 3.74
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
TP25-012Tempiute · copperGrade: 0.18Grade Unit: %Intercept: 3.74 mView all detailsHide details
Identity
- Hole ID
- TP25-012
- Project
- Tempiute
- Commodity
- copper
- Region
- usa_nv
- Reported Region
- usa_nv
- Ticker
- GMTLF
Geometry
- Grade
- 0.18
- Grade Unit
- %
- Intercept
- 3.74 m
- From
- 107.46 m
- To
- 111.2 m
- Hole Depth
- 129.24 m
- Intercept Depth
- 107.46 m
Classification
- Deposit Type
- skarn
- Program
- exploration
- Sample Type
- drill
- Group ID
- TP25-012:107.46-111.2
- Mining Method
- unknown
Location
- Location
- Dead-Eye
- Easting
- 620783
- Northing
- 4167449
- CRS
- NAD83/ UTM Zone 11N Datum
- Azimuth
- 70 °
- Dip
- -45 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- MSA Labs and ALS Laboratories
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Compositing
- Cutoff Grade
- 0.1
- Cutoff Unit
- % WO3
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-21T00:00:00.000Z
Reasoning: This copper grade is slightly above the project's historical average, indicating it's a minor positive byproduct.
Positive factors
- Grade (0.18% Cu) is above the project's prior average (0.157% Cu) for copper.
Negative factors
- Intercept length (3.74m) is below the project's prior average (15m) for copper.
- True thickness is not known.
Evidence · table
“0.18”
Context: 3.74
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
TP25-013Tempiute · tungstenGrade: 0.22Grade Unit: %Intercept: 2.4 mView all detailsHide details
Identity
- Hole ID
- TP25-013
- Project
- Tempiute
- Commodity
- tungsten
- Region
- usa_nv
- Reported Region
- usa_nv
- Ticker
- GMTLF
Geometry
- Grade
- 0.22
- Grade Unit
- %
- Intercept
- 2.4 m
- From
- 69.19 m
- To
- 71.59 m
- Hole Depth
- 185.01 m
- Intercept Depth
- 69.19 m
Classification
- Deposit Type
- skarn
- Program
- exploration
- Sample Type
- drill
- Group ID
- TP25-013:69.19-71.59
- Mining Method
- unknown
Location
- Location
- Dead-Eye
- Easting
- 620782
- Northing
- 4167448
- CRS
- NAD83/ UTM Zone 11N Datum
- Azimuth
- 69 °
- Dip
- -70 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- MSA Labs and ALS Laboratories
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Compositing
- Cutoff Grade
- 0.1
- Cutoff Unit
- % WO3
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-21T00:00:00.000Z
Reasoning: This intercept shows a low tungsten grade over a narrow width, typical for early exploration drilling.
Negative factors
- Grade (0.22% WO3) is below the project's prior average (0.238% WO3) for tungsten.
- Intercept length (2.4m) is below the project's prior average (15.5m) for tungsten.
- True thickness is not known.
Evidence · table
“0.22”
Context: 2.40
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
How Atlas produces this analysis
Minestarters Atlas uses automated extraction to summarize mining announcements, identify reported measurements, and classify supporting evidence. Sentiment reflects the extracted narrative and classification rules; it is an interpretation, not a reported measurement. Evidence quotes and context are provided where available. Missing data, low-confidence results, and review flags indicate limitations. Check the original publisher announcement before relying on an interpretation.