# Group Eleven Intersects 24m of Mineralization, Including 6.3m of 7.9% Zn+Pb and 14 g/t Ag in a 270m Step-Out; Plus Cuts 7.4m of 10.1% Zn+Pb and 36 g/t Ag at Ballywire Canonical Atlas analysis: https://atlas-staging.minestarters.com/news/group-eleven-intersects-24m-of-mineralization-including-6-3m-of-7-9-zn-pb-and-14--40fd1b68-bb38-4bb8-9303-861389f4e9e5 Original source: https://orestocks.com/company/ZNG.V/press-releases/5941245681233129 Publisher: orestocks Original announcement: 2026-10-14T09:00:00.000Z Analysis by Minestarters Atlas Atlas analysis published: 2026-10-14T09:22:57.626Z Atlas analysis updated: 2026-10-14T09:22:57.626Z - Company: Group Eleven Resources Corp. - Ticker: ZNG.V - Exchange: Unavailable - Region: Ireland - Primary commodity: Zinc - Secondary commodities: Lead, Silver, Copper, Antimony - Document categories: Drill results - Extracted: 2026-10-14 09:22:58 UTC Narrative sentiment: 0.80 · Bullish ## Minestarters Atlas summary Group Eleven Resources announced assay results from five drill holes at its Ballywire discovery in Ireland, highlighted by a 270m step-out hole \(26-2654-04\) that intersected 24.2m of 2.8% Zn+Pb, including 6.3m of 7.9% Zn+Pb and 14 g/t Ag. Another hole \(26-468-26\) returned 7.4m of 10.1% Zn+Pb and 36 g/t Ag, filling a 390m gap. These results extend the strike length of higher-grade mineralization by 17% to 1.87km, with mineralization now intersected over 3.2km within a 6.0km prospective trend. Reasoning: Group Eleven's drilling at Ballywire successfully extended the high-grade zinc-lead mineralization by 270m in a step-out hole, significantly increasing the known strike length and demonstrating strong potential for further expansion. Multiple holes returned high-grade Zn+Pb, Ag, and Cu intercepts, confirming continuity and opening new exploration targets. - Positive factor: Significant step-out extension of 270m with high-grade Zn+Pb mineralization - Positive factor: High-grade zinc intercepts exceeding previous bests \(e.g., 18.75% Zn\) - Positive factor: Extension of known strike length by 17% to 1.87km - Positive factor: Good silver and copper intercepts in multiple holes - Positive factor: True width estimates provided for mineralization - Positive factor: QA/QC procedures disclosed with certified lab and QP sign-off - Positive factor: Identification of potential parallel mineralized zones - Negative factor: Some silver and copper grades are below historical bests for the project Low confidence — this extraction should be reviewed alongside the original source. Facts used in scoring: 126 ## Classification and evidence No classification tags are available. ## Extracted facts Stored fact records: 126. Some facts used in scoring do not have a stored record. ## Drill Results (126) ### 26-2654-04 [Link to this fact](https://atlas-staging.minestarters.com/news/group-eleven-intersects-24m-of-mineralization-including-6-3m-of-7-9-zn-pb-and-14--40fd1b68-bb38-4bb8-9303-861389f4e9e5#fact-drill-facts-0) Ballywire · zinc #### Identity - Hole ID: 26-2654-04 - Project: Ballywire - Commodity: zinc - Region: ireland - Reported Region: ireland - Ticker: ZNG.V #### Geometry - Grade: 2.38 - Grade Unit: % - Intercept: 24.15 m - True Width: 21.735 m - From: 433.95 m - To: 458.1 m - Intercept Depth: 433.95 m #### Classification - Program: exploration - Sample Type: drill - Group ID: 26-2654-04:433.95-458.1 #### QA/QC - Laboratory: ALS Laboratories - QA/QC Disclosed: Yes - Lab Certified: Yes - QP Signed: Yes - QA/QC Methods: standards, blanks #### Review - Needs Review: No - Interp. Status: scored - Historical: No #### Dates - Event date: 2026-10-14T00:00:00.000Z Reasoning: This broad intercept in a significant step-out hole indicates a substantial mineralized zone, with a good zinc grade and confirmed true width, suggesting strong potential for resource expansion. - Positive factor: Significant intercept length in a 270m step-out hole - Positive factor: Good zinc grade for an initial broad intercept - Positive factor: True width estimated at 90% of downhole length Evidence · table > 2.38 Context: 24.15 #### Tags used in scoring **True Width Disclosed** Polarity: positive Definition: Actual thickness perpendicular to structure is stated, not just downhole length. Why it applies: true\_width\_m is 21.735 **QA/QC Disclosed** Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Why it applies: qaqc\_disclosed is true **Cut-off Undisclosed** Polarity: negative Definition: High-grade interval reported without stating the cut-off grade used for compositing. Why it applies: no cutoff\_grade was stated **Nearology Play** Polarity: neutral Definition: Value premise rests on proximity to a known deposit rather than own results. Why it applies: proximity is offered as the value premise: "- 1.4m of 9 g/t Ag, \*\*0.49% Cu\*\* - Four rigs continue to drill at Ballywire, with a fifth rig drilling at the Company's" ### 26-2654-04 [Link to this fact](https://atlas-staging.minestarters.com/news/group-eleven-intersects-24m-of-mineralization-including-6-3m-of-7-9-zn-pb-and-14--40fd1b68-bb38-4bb8-9303-861389f4e9e5#fact-drill-facts-1) Ballywire · lead #### Identity - Hole ID: 26-2654-04 - Project: Ballywire - Commodity: lead - Region: ireland - Reported Region: ireland - Ticker: ZNG.V #### Geometry - Grade: 0.4 - Grade Unit: % - Intercept: 24.15 m - True Width: 21.735 m - From: 433.95 m - To: 458.1 m - Intercept Depth: 433.95 m #### Classification - Program: exploration - Sample Type: drill - Group ID: 26-2654-04:433.95-458.1 #### QA/QC - Laboratory: ALS Laboratories - QA/QC Disclosed: Yes - Lab Certified: Yes - QP Signed: Yes - QA/QC Methods: standards, blanks #### Review - Needs Review: No - Interp. Status: scored - Historical: No #### Dates - Event date: 2026-10-14T00:00:00.000Z Reasoning: The lead grade, while moderate, contributes to the overall polymetallic nature of this significant step-out intercept, confirming broad mineralization. - Positive factor: Significant intercept length in a 270m step-out hole - Positive factor: Lead grade contributes to overall Zn+Pb mineralization - Positive factor: True width estimated at 90% of downhole length Evidence · table > 0.40 Context: 24.15 #### Tags used in scoring **True Width Disclosed** Polarity: positive Definition: Actual thickness perpendicular to structure is stated, not just downhole length. Why it applies: true\_width\_m is 21.735 **QA/QC Disclosed** Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Why it applies: qaqc\_disclosed is true **Cut-off Undisclosed** Polarity: negative Definition: High-grade interval reported without stating the cut-off grade used for compositing. Why it applies: no cutoff\_grade was stated **Nearology Play** Polarity: neutral Definition: Value premise rests on proximity to a known deposit rather than own results. Why it applies: proximity is offered as the value premise: "- 1.4m of 9 g/t Ag, \*\*0.49% Cu\*\* - Four rigs continue to drill at Ballywire, with a fifth rig drilling at the Company's" ### 26-2654-04 [Link to this fact](https://atlas-staging.minestarters.com/news/group-eleven-intersects-24m-of-mineralization-including-6-3m-of-7-9-zn-pb-and-14--40fd1b68-bb38-4bb8-9303-861389f4e9e5#fact-drill-facts-2) Ballywire · silver #### Identity - Hole ID: 26-2654-04 - Project: Ballywire - Commodity: silver - Region: ireland - Reported Region: ireland - Ticker: ZNG.V #### Geometry - Grade: 5.3 - Grade Unit: g/t - Intercept: 24.15 m - True Width: 21.735 m - From: 433.95 m - To: 458.1 m - Intercept Depth: 433.95 m #### Classification - Program: exploration - Sample Type: drill - Group ID: 26-2654-04:433.95-458.1 #### QA/QC - Laboratory: ALS Laboratories - QA/QC Disclosed: Yes - Lab Certified: Yes - QP Signed: Yes - QA/QC Methods: standards, blanks #### Review - Needs Review: No - Interp. Status: scored - Historical: No #### Dates - Event date: 2026-10-14T00:00:00.000Z Reasoning: The silver grade, while not high, contributes to the overall polymetallic nature of this important step-out intercept, confirming broad mineralization. - Positive factor: Significant intercept length in a 270m step-out hole - Positive factor: Silver grade adds to polymetallic value - Positive factor: True width estimated at 90% of downhole length Evidence · table > 5.3 Context: 24.15 #### Tags used in scoring **True Width Disclosed** Polarity: positive Definition: Actual thickness perpendicular to structure is stated, not just downhole length. Why it applies: true\_width\_m is 21.735 **QA/QC Disclosed** Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Why it applies: qaqc\_disclosed is true **Cut-off Undisclosed** Polarity: negative Definition: High-grade interval reported without stating the cut-off grade used for compositing. Why it applies: no cutoff\_grade was stated **Nearology Play** Polarity: neutral Definition: Value premise rests on proximity to a known deposit rather than own results. Why it applies: proximity is offered as the value premise: "- 1.4m of 9 g/t Ag, \*\*0.49% Cu\*\* - Four rigs continue to drill at Ballywire, with a fifth rig drilling at the Company's" ### 26-2654-04 [Link to this fact](https://atlas-staging.minestarters.com/news/group-eleven-intersects-24m-of-mineralization-including-6-3m-of-7-9-zn-pb-and-14--40fd1b68-bb38-4bb8-9303-861389f4e9e5#fact-drill-facts-3) Ballywire · zinc #### Identity - Hole ID: 26-2654-04 - Project: Ballywire - Commodity: zinc - Region: ireland - Reported Region: ireland - Ticker: ZNG.V #### Geometry - Grade: 6.1 - Grade Unit: % - Intercept: 7.23 m - True Width: 6.507 m - From: 442.46 m - To: 449.69 m - Intercept Depth: 433.95 m #### Classification - Program: exploration - Sample Type: drill - Group ID: 26-2654-04:442.46-449.69 #### QA/QC - Laboratory: ALS Laboratories - QA/QC Disclosed: Yes - Lab Certified: Yes - QP Signed: Yes - QA/QC Methods: standards, blanks #### Review - Needs Review: No - Interp. Status: scored - Historical: No #### Dates - Event date: 2026-10-14T00:00:00.000Z Reasoning: This high-grade zinc intercept within a broader mineralized zone in a step-out hole is very positive, indicating strong continuity of high-grade mineralization. - Positive factor: High-grade zinc intercept within a significant step-out hole - Positive factor: Good width for high-grade mineralization - Positive factor: True width estimated at 90% of downhole length Evidence · table > 6.10 Context: 7.23 #### Tags used in scoring **True Width Disclosed** Polarity: positive Definition: Actual thickness perpendicular to structure is stated, not just downhole length. Why it applies: true\_width\_m is 6.507 **QA/QC Disclosed** Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Why it applies: qaqc\_disclosed is true **Cut-off Undisclosed** Polarity: negative Definition: High-grade interval reported without stating the cut-off grade used for compositing. Why it applies: no cutoff\_grade was stated **Nearology Play** Polarity: neutral Definition: Value premise rests on proximity to a known deposit rather than own results. Why it applies: proximity is offered as the value premise: "- 1.4m of 9 g/t Ag, \*\*0.49% Cu\*\* - Four rigs continue to drill at Ballywire, with a fifth rig drilling at the Company's" ### 26-2654-04 [Link to this fact](https://atlas-staging.minestarters.com/news/group-eleven-intersects-24m-of-mineralization-including-6-3m-of-7-9-zn-pb-and-14--40fd1b68-bb38-4bb8-9303-861389f4e9e5#fact-drill-facts-4) Ballywire · lead #### Identity - Hole ID: 26-2654-04 - Project: Ballywire - Commodity: lead - Region: ireland - Reported Region: ireland - Ticker: ZNG.V #### Geometry - Grade: 1.06 - Grade Unit: % - Intercept: 7.23 m - True Width: 6.507 m - From: 442.46 m - To: 449.69 m - Intercept Depth: 433.95 m #### Classification - Program: exploration - Sample Type: drill - Group ID: 26-2654-04:442.46-449.69 #### QA/QC - Laboratory: ALS Laboratories - QA/QC Disclosed: Yes - Lab Certified: Yes - QP Signed: Yes - QA/QC Methods: standards, blanks #### Review - Needs Review: No - Interp. Status: scored - Historical: No #### Dates - Event date: 2026-10-14T00:00:00.000Z Reasoning: The lead grade significantly contributes to the high-grade polymetallic nature of this intercept, reinforcing the quality of the mineralization in the step-out hole. - Positive factor: Good lead grade contributing to high-grade Zn+Pb mineralization - Positive factor: Good width for high-grade mineralization - Positive factor: True width estimated at 90% of downhole length Evidence · table > 1.06 Context: 7.23 #### Tags used in scoring **True Width Disclosed** Polarity: positive Definition: Actual thickness perpendicular to structure is stated, not just downhole length. Why it applies: true\_width\_m is 6.507 **QA/QC Disclosed** Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Why it applies: qaqc\_disclosed is true **Cut-off Undisclosed** Polarity: negative Definition: High-grade interval reported without stating the cut-off grade used for compositing. Why it applies: no cutoff\_grade was stated **Nearology Play** Polarity: neutral Definition: Value premise rests on proximity to a known deposit rather than own results. Why it applies: proximity is offered as the value premise: "- 1.4m of 9 g/t Ag, \*\*0.49% Cu\*\* - Four rigs continue to drill at Ballywire, with a fifth rig drilling at the Company's" ### 26-2654-04 [Link to this fact](https://atlas-staging.minestarters.com/news/group-eleven-intersects-24m-of-mineralization-including-6-3m-of-7-9-zn-pb-and-14--40fd1b68-bb38-4bb8-9303-861389f4e9e5#fact-drill-facts-5) Ballywire · silver #### Identity - Hole ID: 26-2654-04 - Project: Ballywire - Commodity: silver - Region: ireland - Reported Region: ireland - Ticker: ZNG.V #### Geometry - Grade: 13.2 - Grade Unit: g/t - Intercept: 7.23 m - True Width: 6.507 m - From: 442.46 m - To: 449.69 m - Intercept Depth: 433.95 m #### Classification - Program: exploration - Sample Type: drill - Group ID: 26-2654-04:442.46-449.69 #### QA/QC - Laboratory: ALS Laboratories - QA/QC Disclosed: Yes - Lab Certified: Yes - QP Signed: Yes - QA/QC Methods: standards, blanks #### Review - Needs Review: No - Interp. Status: scored - Historical: No #### Dates - Event date: 2026-10-14T00:00:00.000Z Reasoning: The silver grade enhances the polymetallic nature of this high-grade intercept, contributing to the overall value of the step-out discovery. - Positive factor: Moderate silver grade adding to polymetallic value - Positive factor: Good width for mineralization - Positive factor: True width estimated at 90% of downhole length Evidence · table > 13.2 Context: 7.23 #### Tags used in scoring **True Width Disclosed** Polarity: positive Definition: Actual thickness perpendicular to structure is stated, not just downhole length. Why it applies: true\_width\_m is 6.507 **QA/QC Disclosed** Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Why it applies: qaqc\_disclosed is true **Cut-off Undisclosed** Polarity: negative Definition: High-grade interval reported without stating the cut-off grade used for compositing. Why it applies: no cutoff\_grade was stated **Nearology Play** Polarity: neutral Definition: Value premise rests on proximity to a known deposit rather than own results. Why it applies: proximity is offered as the value premise: "- 1.4m of 9 g/t Ag, \*\*0.49% Cu\*\* - Four rigs continue to drill at Ballywire, with a fifth rig drilling at the Company's" ### 26-2654-04 [Link to this fact](https://atlas-staging.minestarters.com/news/group-eleven-intersects-24m-of-mineralization-including-6-3m-of-7-9-zn-pb-and-14--40fd1b68-bb38-4bb8-9303-861389f4e9e5#fact-drill-facts-6) Ballywire · copper #### Identity - Hole ID: 26-2654-04 - Project: Ballywire - Commodity: copper - Region: ireland - Reported Region: ireland - Ticker: ZNG.V #### Geometry - Grade: 0.01 - Grade Unit: % - Intercept: 7.23 m - True Width: 6.507 m - From: 442.46 m - To: 449.69 m - Intercept Depth: 433.95 m #### Classification - Program: exploration - Sample Type: drill - Group ID: 26-2654-04:442.46-449.69 #### QA/QC - Laboratory: ALS Laboratories - QA/QC Disclosed: Yes - Lab Certified: Yes - QP Signed: Yes - QA/QC Methods: standards, blanks #### Review - Needs Review: No - Interp. Status: scored - Historical: No #### Dates - Event date: 2026-10-14T00:00:00.000Z Reasoning: While the copper grade is very low, its presence in this high-grade polymetallic intercept is noted as part of the overall mineral assemblage. - Positive factor: Presence of copper, indicating polymetallic mineralization - Positive factor: True width estimated at 90% of downhole length - Negative factor: Very low copper grade Evidence · table > 0.01 Context: 7.23 #### Tags used in scoring **True Width Disclosed** Polarity: positive Definition: Actual thickness perpendicular to structure is stated, not just downhole length. Why it applies: true\_width\_m is 6.507 **QA/QC Disclosed** Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Why it applies: qaqc\_disclosed is true **Cut-off Undisclosed** Polarity: negative Definition: High-grade interval reported without stating the cut-off grade used for compositing. Why it applies: no cutoff\_grade was stated **Nearology Play** Polarity: neutral Definition: Value premise rests on proximity to a known deposit rather than own results. Why it applies: proximity is offered as the value premise: "- 1.4m of 9 g/t Ag, \*\*0.49% Cu\*\* - Four rigs continue to drill at Ballywire, with a fifth rig drilling at the Company's" ### 26-2654-04 [Link to this fact](https://atlas-staging.minestarters.com/news/group-eleven-intersects-24m-of-mineralization-including-6-3m-of-7-9-zn-pb-and-14--40fd1b68-bb38-4bb8-9303-861389f4e9e5#fact-drill-facts-7) Ballywire · zinc #### Identity - Hole ID: 26-2654-04 - Project: Ballywire - Commodity: zinc - Region: ireland - Reported Region: ireland - Ticker: ZNG.V #### Geometry - Grade: 6.75 - Grade Unit: % - Intercept: 6.27 m - True Width: 5.643 m - From: 443.42 m - To: 449.69 m - Intercept Depth: 433.95 m #### Classification - Program: exploration - Sample Type: drill - Group ID: 26-2654-04:443.42-449.69 #### QA/QC - Laboratory: ALS Laboratories - QA/QC Disclosed: Yes - Lab Certified: Yes - QP Signed: Yes - QA/QC Methods: standards, blanks #### Review - Needs Review: No - Interp. Status: scored - Historical: No #### Dates - Event date: 2026-10-14T00:00:00.000Z Reasoning: This very high-grade zinc intercept is a bonanza result, confirming excellent mineralization quality and continuity in the step-out area. - Positive factor: Very high-grade zinc intercept within a significant step-out hole - Positive factor: Good width for bonanza-grade mineralization - Positive factor: True width estimated at 90% of downhole length Evidence · table > 6.75 Context: 6.27 #### Tags used in scoring **True Width Disclosed** Polarity: positive Definition: Actual thickness perpendicular to structure is stated, not just downhole length. Why it applies: true\_width\_m is 5.643 **QA/QC Disclosed** Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Why it applies: qaqc\_disclosed is true **Cut-off Undisclosed** Polarity: negative Definition: High-grade interval reported without stating the cut-off grade used for compositing. Why it applies: no cutoff\_grade was stated **Nearology Play** Polarity: neutral Definition: Value premise rests on proximity to a known deposit rather than own results. Why it applies: proximity is offered as the value premise: "- 1.4m of 9 g/t Ag, \*\*0.49% Cu\*\* - Four rigs continue to drill at Ballywire, with a fifth rig drilling at the Company's" ### 26-2654-04 [Link to this fact](https://atlas-staging.minestarters.com/news/group-eleven-intersects-24m-of-mineralization-including-6-3m-of-7-9-zn-pb-and-14--40fd1b68-bb38-4bb8-9303-861389f4e9e5#fact-drill-facts-8) Ballywire · lead #### Identity - Hole ID: 26-2654-04 - Project: Ballywire - Commodity: lead - Region: ireland - Reported Region: ireland - Ticker: ZNG.V #### Geometry - Grade: 1.15 - Grade Unit: % - Intercept: 6.27 m - True Width: 5.643 m - From: 443.42 m - To: 449.69 m - Intercept Depth: 433.95 m #### Classification - Program: exploration - Sample Type: drill - Group ID: 26-2654-04:443.42-449.69 #### QA/QC - Laboratory: ALS Laboratories - QA/QC Disclosed: Yes - Lab Certified: Yes - QP Signed: Yes - QA/QC Methods: standards, blanks #### Review - Needs Review: No - Interp. Status: scored - Historical: No #### Dates - Event date: 2026-10-14T00:00:00.000Z Reasoning: The high lead grade significantly enhances the bonanza-grade polymetallic nature of this intercept, reinforcing the excellent quality of mineralization. - Positive factor: High-grade lead contributing to bonanza Zn+Pb mineralization - Positive factor: Good width for high-grade mineralization - Positive factor: True width estimated at 90% of downhole length Evidence · table > 1.15 Context: 6.27 #### Tags used in scoring **True Width Disclosed** Polarity: positive Definition: Actual thickness perpendicular to structure is stated, not just downhole length. Why it applies: true\_width\_m is 5.643 **QA/QC Disclosed** Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Why it applies: qaqc\_disclosed is true **Cut-off Undisclosed** Polarity: negative Definition: High-grade interval reported without stating the cut-off grade used for compositing. Why it applies: no cutoff\_grade was stated **Nearology Play** Polarity: neutral Definition: Value premise rests on proximity to a known deposit rather than own results. Why it applies: proximity is offered as the value premise: "- 1.4m of 9 g/t Ag, \*\*0.49% Cu\*\* - Four rigs continue to drill at Ballywire, with a fifth rig drilling at the Company's" ### 26-2654-04 [Link to this fact](https://atlas-staging.minestarters.com/news/group-eleven-intersects-24m-of-mineralization-including-6-3m-of-7-9-zn-pb-and-14--40fd1b68-bb38-4bb8-9303-861389f4e9e5#fact-drill-facts-9) Ballywire · silver #### Identity - Hole ID: 26-2654-04 - Project: Ballywire - Commodity: silver - Region: ireland - Reported Region: ireland - Ticker: ZNG.V #### Geometry - Grade: 13.8 - Grade Unit: g/t - Intercept: 6.27 m - True Width: 5.643 m - From: 443.42 m - To: 449.69 m - Intercept Depth: 433.95 m #### Classification - Program: exploration - Sample Type: drill - Group ID: 26-2654-04:443.42-449.69 #### QA/QC - Laboratory: ALS Laboratories - QA/QC Disclosed: Yes - Lab Certified: Yes - QP Signed: Yes - QA/QC Methods: standards, blanks #### Review - Needs Review: No - Interp. Status: scored - Historical: No #### Dates - Event date: 2026-10-14T00:00:00.000Z Reasoning: The silver grade enhances the polymetallic nature of this bonanza-grade intercept, contributing to the overall value of the step-out discovery. - Positive factor: Moderate silver grade adding to polymetallic value - Positive factor: Good width for mineralization - Positive factor: True width estimated at 90% of downhole length Evidence · table > 13.8 Context: 6.27 #### Tags used in scoring **True Width Disclosed** Polarity: positive Definition: Actual thickness perpendicular to structure is stated, not just downhole length. Why it applies: true\_width\_m is 5.643 **QA/QC Disclosed** Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Why it applies: qaqc\_disclosed is true **Cut-off Undisclosed** Polarity: negative Definition: High-grade interval reported without stating the cut-off grade used for compositing. Why it applies: no cutoff\_grade was stated **Nearology Play** Polarity: neutral Definition: Value premise rests on proximity to a known deposit rather than own results. Why it applies: proximity is offered as the value premise: "- 1.4m of 9 g/t Ag, \*\*0.49% Cu\*\* - Four rigs continue to drill at Ballywire, with a fifth rig drilling at the Company's" ### 26-2654-04 [Link to this fact](https://atlas-staging.minestarters.com/news/group-eleven-intersects-24m-of-mineralization-including-6-3m-of-7-9-zn-pb-and-14--40fd1b68-bb38-4bb8-9303-861389f4e9e5#fact-drill-facts-10) Ballywire · copper #### Identity - Hole ID: 26-2654-04 - Project: Ballywire - Commodity: copper - Region: ireland - Reported Region: ireland - Ticker: ZNG.V #### Geometry - Grade: 0.01 - Grade Unit: % - Intercept: 6.27 m - True Width: 5.643 m - From: 443.42 m - To: 449.69 m - Intercept Depth: 433.95 m #### Classification - Program: exploration - Sample Type: drill - Group ID: 26-2654-04:443.42-449.69 #### QA/QC - Laboratory: ALS Laboratories - QA/QC Disclosed: Yes - Lab Certified: Yes - QP Signed: Yes - QA/QC Methods: standards, blanks #### Review - Needs Review: No - Interp. Status: scored - Historical: No #### Dates - Event date: 2026-10-14T00:00:00.000Z Reasoning: While the copper grade is very low, its presence in this bonanza-grade polymetallic intercept is noted as part of the overall mineral assemblage. - Positive factor: Presence of copper, indicating polymetallic mineralization - Positive factor: True width estimated at 90% of downhole length - Negative factor: Very low copper grade Evidence · table > 0.01 Context: 6.27 #### Tags used in scoring **True Width Disclosed** Polarity: positive Definition: Actual thickness perpendicular to structure is stated, not just downhole length. Why it applies: true\_width\_m is 5.643 **QA/QC Disclosed** Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Why it applies: qaqc\_disclosed is true **Cut-off Undisclosed** Polarity: negative Definition: High-grade interval reported without stating the cut-off grade used for compositing. Why it applies: no cutoff\_grade was stated **Nearology Play** Polarity: neutral Definition: Value premise rests on proximity to a known deposit rather than own results. Why it applies: proximity is offered as the value premise: "- 1.4m of 9 g/t Ag, \*\*0.49% Cu\*\* - Four rigs continue to drill at Ballywire, with a fifth rig drilling at the Company's" ### 26-2654-04 [Link to this fact](https://atlas-staging.minestarters.com/news/group-eleven-intersects-24m-of-mineralization-including-6-3m-of-7-9-zn-pb-and-14--40fd1b68-bb38-4bb8-9303-861389f4e9e5#fact-drill-facts-11) Ballywire · zinc #### Identity - Hole ID: 26-2654-04 - Project: Ballywire - Commodity: zinc - Region: ireland - Reported Region: ireland - Ticker: ZNG.V #### Geometry - Grade: 9.14 - Grade Unit: % - Intercept: 2.85 m - True Width: 2.565 m - From: 443.42 m - To: 446.27 m - Intercept Depth: 433.95 m #### Classification - Program: exploration - Sample Type: drill - Group ID: 26-2654-04:443.42-446.27 #### QA/QC - Laboratory: ALS Laboratories - QA/QC Disclosed: Yes - Lab Certified: Yes - QP Signed: Yes - QA/QC Methods: standards, blanks #### Review - Needs Review: No - Interp. Status: scored - Historical: No #### Dates - Event date: 2026-10-14T00:00:00.000Z Reasoning: This exceptional zinc grade within a high-grade zone further confirms the bonanza-grade potential and continuity of mineralization in the step-out area. - Positive factor: Exceptional zinc grade within a significant step-out hole - Positive factor: Good width for bonanza-grade mineralization - Positive factor: True width estimated at 90% of downhole length Evidence · table > 9.14 Context: 2.85 #### Tags used in scoring **True Width Disclosed** Polarity: positive Definition: Actual thickness perpendicular to structure is stated, not just downhole length. Why it applies: true\_width\_m is 2.565 **QA/QC Disclosed** Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Why it applies: qaqc\_disclosed is true **Cut-off Undisclosed** Polarity: negative Definition: High-grade interval reported without stating the cut-off grade used for compositing. Why it applies: no cutoff\_grade was stated **Nearology Play** Polarity: neutral Definition: Value premise rests on proximity to a known deposit rather than own results. Why it applies: proximity is offered as the value premise: "- 1.4m of 9 g/t Ag, \*\*0.49% Cu\*\* - Four rigs continue to drill at Ballywire, with a fifth rig drilling at the Company's" ### 26-2654-04 [Link to this fact](https://atlas-staging.minestarters.com/news/group-eleven-intersects-24m-of-mineralization-including-6-3m-of-7-9-zn-pb-and-14--40fd1b68-bb38-4bb8-9303-861389f4e9e5#fact-drill-facts-12) Ballywire · lead #### Identity - Hole ID: 26-2654-04 - Project: Ballywire - Commodity: lead - Region: ireland - Reported Region: ireland - Ticker: ZNG.V #### Geometry - Grade: 1.72 - Grade Unit: % - Intercept: 2.85 m - True Width: 2.565 m - From: 443.42 m - To: 446.27 m - Intercept Depth: 433.95 m #### Classification - Program: exploration - Sample Type: drill - Group ID: 26-2654-04:443.42-446.27 #### QA/QC - Laboratory: ALS Laboratories - QA/QC Disclosed: Yes - Lab Certified: Yes - QP Signed: Yes - QA/QC Methods: standards, blanks #### Review - Needs Review: No - Interp. Status: scored - Historical: No #### Dates - Event date: 2026-10-14T00:00:00.000Z Reasoning: The exceptional lead grade further enhances the bonanza-grade polymetallic nature of this intercept, indicating very high-quality mineralization. - Positive factor: Exceptional lead grade contributing to bonanza Zn+Pb mineralization - Positive factor: Good width for high-grade mineralization - Positive factor: True width estimated at 90% of downhole length Evidence · table > 1.72 Context: 2.85 #### Tags used in scoring **True Width Disclosed** Polarity: positive Definition: Actual thickness perpendicular to structure is stated, not just downhole length. Why it applies: true\_width\_m is 2.565 **QA/QC Disclosed** Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Why it applies: qaqc\_disclosed is true **Cut-off Undisclosed** Polarity: negative Definition: High-grade interval reported without stating the cut-off grade used for compositing. Why it applies: no cutoff\_grade was stated **Nearology Play** Polarity: neutral Definition: Value premise rests on proximity to a known deposit rather than own results. Why it applies: proximity is offered as the value premise: "- 1.4m of 9 g/t Ag, \*\*0.49% Cu\*\* - Four rigs continue to drill at Ballywire, with a fifth rig drilling at the Company's" ### 26-2654-04 [Link to this fact](https://atlas-staging.minestarters.com/news/group-eleven-intersects-24m-of-mineralization-including-6-3m-of-7-9-zn-pb-and-14--40fd1b68-bb38-4bb8-9303-861389f4e9e5#fact-drill-facts-13) Ballywire · silver #### Identity - Hole ID: 26-2654-04 - Project: Ballywire - Commodity: silver - Region: ireland - Reported Region: ireland - Ticker: ZNG.V #### Geometry - Grade: 17.9 - Grade Unit: g/t - Intercept: 2.85 m - True Width: 2.565 m - From: 443.42 m - To: 446.27 m - Intercept Depth: 433.95 m #### Classification - Program: exploration - Sample Type: drill - Group ID: 26-2654-04:443.42-446.27 #### QA/QC - Laboratory: ALS Laboratories - QA/QC Disclosed: Yes - Lab Certified: Yes - QP Signed: Yes - QA/QC Methods: standards, blanks #### Review - Needs Review: No - Interp. Status: scored - Historical: No #### Dates - Event date: 2026-10-14T00:00:00.000Z Reasoning: The silver grade enhances the polymetallic nature of this exceptional intercept, contributing to the overall value of the step-out discovery. - Positive factor: Moderate silver grade adding to polymetallic value - Positive factor: Good width for mineralization - Positive factor: True width estimated at 90% of downhole length Evidence · table > 17.9 Context: 2.85 #### Tags used in scoring **True Width Disclosed** Polarity: positive Definition: Actual thickness perpendicular to structure is stated, not just downhole length. Why it applies: true\_width\_m is 2.565 **QA/QC Disclosed** Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Why it applies: qaqc\_disclosed is true **Cut-off Undisclosed** Polarity: negative Definition: High-grade interval reported without stating the cut-off grade used for compositing. Why it applies: no cutoff\_grade was stated **Nearology Play** Polarity: neutral Definition: Value premise rests on proximity to a known deposit rather than own results. Why it applies: proximity is offered as the value premise: "- 1.4m of 9 g/t Ag, \*\*0.49% Cu\*\* - Four rigs continue to drill at Ballywire, with a fifth rig drilling at the Company's" ### 26-2654-04 [Link to this fact](https://atlas-staging.minestarters.com/news/group-eleven-intersects-24m-of-mineralization-including-6-3m-of-7-9-zn-pb-and-14--40fd1b68-bb38-4bb8-9303-861389f4e9e5#fact-drill-facts-14) Ballywire · copper #### Identity - Hole ID: 26-2654-04 - Project: Ballywire - Commodity: copper - Region: ireland - Reported Region: ireland - Ticker: ZNG.V #### Geometry - Grade: 0.01 - Grade Unit: % - Intercept: 2.85 m - True Width: 2.565 m - From: 443.42 m - To: 446.27 m - Intercept Depth: 433.95 m #### Classification - Program: exploration - Sample Type: drill - Group ID: 26-2654-04:443.42-446.27 #### QA/QC - Laboratory: ALS Laboratories - QA/QC Disclosed: Yes - Lab Certified: Yes - QP Signed: Yes - QA/QC Methods: standards, blanks #### Review - Needs Review: No - Interp. Status: scored - Historical: No #### Dates - Event date: 2026-10-14T00:00:00.000Z Reasoning: While the copper grade is very low, its presence in this exceptional polymetallic intercept is noted as part of the overall mineral assemblage. - Positive factor: Presence of copper, indicating polymetallic mineralization - Positive factor: True width estimated at 90% of downhole length - Negative factor: Very low copper grade Evidence · table > 0.01 Context: 2.85 #### Tags used in scoring **True Width Disclosed** Polarity: positive Definition: Actual thickness perpendicular to structure is stated, not just downhole length. Why it applies: true\_width\_m is 2.565 **QA/QC Disclosed** Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Why it applies: qaqc\_disclosed is true **Cut-off Undisclosed** Polarity: negative Definition: High-grade interval reported without stating the cut-off grade used for compositing. Why it applies: no cutoff\_grade was stated **Nearology Play** Polarity: neutral Definition: Value premise rests on proximity to a known deposit rather than own results. Why it applies: proximity is offered as the value premise: "- 1.4m of 9 g/t Ag, \*\*0.49% Cu\*\* - Four rigs continue to drill at Ballywire, with a fifth rig drilling at the Company's" ### 26-2654-04 [Link to this fact](https://atlas-staging.minestarters.com/news/group-eleven-intersects-24m-of-mineralization-including-6-3m-of-7-9-zn-pb-and-14--40fd1b68-bb38-4bb8-9303-861389f4e9e5#fact-drill-facts-15) Ballywire · zinc #### Identity - Hole ID: 26-2654-04 - Project: Ballywire - Commodity: zinc - Region: ireland - Reported Region: ireland - Ticker: ZNG.V #### Geometry - Grade: 18.75 - Grade Unit: % - Intercept: 0.98 m - True Width: 0.882 m - From: 444.31 m - To: 445.29 m - Intercept Depth: 433.95 m #### Classification - Program: exploration - Sample Type: drill - Group ID: 26-2654-04:444.31-445.29 #### QA/QC - Laboratory: ALS Laboratories - QA/QC Disclosed: Yes - Lab Certified: Yes - QP Signed: Yes - QA/QC Methods: standards, blanks #### Review - Needs Review: No - Interp. Status: scored - Historical: No #### Dates - Event date: 2026-10-14T00:00:00.000Z Reasoning: This bonanza zinc grade is an exceptional result, significantly exceeding previous bests and indicating extremely high-grade mineralization in the step-out area. - Positive factor: Bonanza zinc grade, exceeding prior bests for the project - Positive factor: Exceptional grade over a narrow but significant interval - Positive factor: True width estimated at 90% of downhole length Evidence · table > 18.75 Context: 0.98 #### Tags used in scoring **True Width Disclosed** Polarity: positive Definition: Actual thickness perpendicular to structure is stated, not just downhole length. Why it applies: true\_width\_m is 0.882 **QA/QC Disclosed** Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Why it applies: qaqc\_disclosed is true **Cut-off Undisclosed** Polarity: negative Definition: High-grade interval reported without stating the cut-off grade used for compositing. Why it applies: no cutoff\_grade was stated **Nearology Play** Polarity: neutral Definition: Value premise rests on proximity to a known deposit rather than own results. Why it applies: proximity is offered as the value premise: "- 1.4m of 9 g/t Ag, \*\*0.49% Cu\*\* - Four rigs continue to drill at Ballywire, with a fifth rig drilling at the Company's" ### 26-2654-04 [Link to this fact](https://atlas-staging.minestarters.com/news/group-eleven-intersects-24m-of-mineralization-including-6-3m-of-7-9-zn-pb-and-14--40fd1b68-bb38-4bb8-9303-861389f4e9e5#fact-drill-facts-16) Ballywire · lead #### Identity - Hole ID: 26-2654-04 - Project: Ballywire - Commodity: lead - Region: ireland - Reported Region: ireland - Ticker: ZNG.V #### Geometry - Grade: 3.39 - Grade Unit: % - Intercept: 0.98 m - True Width: 0.882 m - From: 444.31 m - To: 445.29 m - Intercept Depth: 433.95 m #### Classification - Program: exploration - Sample Type: drill - Group ID: 26-2654-04:444.31-445.29 #### QA/QC - Laboratory: ALS Laboratories - QA/QC Disclosed: Yes - Lab Certified: Yes - QP Signed: Yes - QA/QC Methods: standards, blanks #### Review - Needs Review: No - Interp. Status: scored - Historical: No #### Dates - Event date: 2026-10-14T00:00:00.000Z Reasoning: The bonanza lead grade further enhances the exceptional polymetallic nature of this intercept, indicating extremely high-quality mineralization. - Positive factor: Bonanza lead grade contributing to exceptional Zn+Pb mineralization - Positive factor: Exceptional grade over a narrow but significant interval - Positive factor: True width estimated at 90% of downhole length Evidence · table > 3.39 Context: 0.98 #### Tags used in scoring **True Width Disclosed** Polarity: positive Definition: Actual thickness perpendicular to structure is stated, not just downhole length. Why it applies: true\_width\_m is 0.882 **QA/QC Disclosed** Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Why it applies: qaqc\_disclosed is true **Cut-off Undisclosed** Polarity: negative Definition: High-grade interval reported without stating the cut-off grade used for compositing. Why it applies: no cutoff\_grade was stated **Nearology Play** Polarity: neutral Definition: Value premise rests on proximity to a known deposit rather than own results. Why it applies: proximity is offered as the value premise: "- 1.4m of 9 g/t Ag, \*\*0.49% Cu\*\* - Four rigs continue to drill at Ballywire, with a fifth rig drilling at the Company's" ### 26-2654-04 [Link to this fact](https://atlas-staging.minestarters.com/news/group-eleven-intersects-24m-of-mineralization-including-6-3m-of-7-9-zn-pb-and-14--40fd1b68-bb38-4bb8-9303-861389f4e9e5#fact-drill-facts-17) Ballywire · silver #### Identity - Hole ID: 26-2654-04 - Project: Ballywire - Commodity: silver - Region: ireland - Reported Region: ireland - Ticker: ZNG.V #### Geometry - Grade: 27.2 - Grade Unit: g/t - Intercept: 0.98 m - True Width: 0.882 m - From: 444.31 m - To: 445.29 m - Intercept Depth: 433.95 m #### Classification - Program: exploration - Sample Type: drill - Group ID: 26-2654-04:444.31-445.29 #### QA/QC - Laboratory: ALS Laboratories - QA/QC Disclosed: Yes - Lab Certified: Yes - QP Signed: Yes - QA/QC Methods: standards, blanks #### Review - Needs Review: No - Interp. Status: scored - Historical: No #### Dates - Event date: 2026-10-14T00:00:00.000Z Reasoning: The good silver grade enhances the polymetallic nature of this bonanza-grade intercept, contributing significantly to the overall value of the step-out discovery. - Positive factor: Good silver grade adding to polymetallic value - Positive factor: Exceptional grade over a narrow but significant interval - Positive factor: True width estimated at 90% of downhole length Evidence · table > 27.2 Context: 0.98 #### Tags used in scoring **True Width Disclosed** Polarity: positive Definition: Actual thickness perpendicular to structure is stated, not just downhole length. Why it applies: true\_width\_m is 0.882 **QA/QC Disclosed** Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Why it applies: qaqc\_disclosed is true **Cut-off Undisclosed** Polarity: negative Definition: High-grade interval reported without stating the cut-off grade used for compositing. Why it applies: no cutoff\_grade was stated **Nearology Play** Polarity: neutral Definition: Value premise rests on proximity to a known deposit rather than own results. Why it applies: proximity is offered as the value premise: "- 1.4m of 9 g/t Ag, \*\*0.49% Cu\*\* - Four rigs continue to drill at Ballywire, with a fifth rig drilling at the Company's" ### 26-2654-04 [Link to this fact](https://atlas-staging.minestarters.com/news/group-eleven-intersects-24m-of-mineralization-including-6-3m-of-7-9-zn-pb-and-14--40fd1b68-bb38-4bb8-9303-861389f4e9e5#fact-drill-facts-18) Ballywire · copper #### Identity - Hole ID: 26-2654-04 - Project: Ballywire - Commodity: copper - Region: ireland - Reported Region: ireland - Ticker: ZNG.V #### Geometry - Grade: 0.02 - Grade Unit: % - Intercept: 0.98 m - True Width: 0.882 m - From: 444.31 m - To: 445.29 m - Intercept Depth: 433.95 m #### Classification - Program: exploration - Sample Type: drill - Group ID: 26-2654-04:444.31-445.29 #### QA/QC - Laboratory: ALS Laboratories - QA/QC Disclosed: Yes - Lab Certified: Yes - QP Signed: Yes - QA/QC Methods: standards, blanks #### Review - Needs Review: No - Interp. Status: scored - Historical: No #### Dates - Event date: 2026-10-14T00:00:00.000Z Reasoning: While the copper grade is very low, its presence in this bonanza-grade polymetallic intercept is noted as part of the overall mineral assemblage. - Positive factor: Presence of copper, indicating polymetallic mineralization - Positive factor: True width estimated at 90% of downhole length - Negative factor: Very low copper grade Evidence · table > 0.02 Context: 0.98 #### Tags used in scoring **True Width Disclosed** Polarity: positive Definition: Actual thickness perpendicular to structure is stated, not just downhole length. Why it applies: true\_width\_m is 0.882 **QA/QC Disclosed** Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Why it applies: qaqc\_disclosed is true **Cut-off Undisclosed** Polarity: negative Definition: High-grade interval reported without stating the cut-off grade used for compositing. Why it applies: no cutoff\_grade was stated **Nearology Play** Polarity: neutral Definition: Value premise rests on proximity to a known deposit rather than own results. Why it applies: proximity is offered as the value premise: "- 1.4m of 9 g/t Ag, \*\*0.49% Cu\*\* - Four rigs continue to drill at Ballywire, with a fifth rig drilling at the Company's" ### 26-2654-04 [Link to this fact](https://atlas-staging.minestarters.com/news/group-eleven-intersects-24m-of-mineralization-including-6-3m-of-7-9-zn-pb-and-14--40fd1b68-bb38-4bb8-9303-861389f4e9e5#fact-drill-facts-19) Ballywire · zinc #### Identity - Hole ID: 26-2654-04 - Project: Ballywire - Commodity: zinc - Region: ireland - Reported Region: ireland - Ticker: ZNG.V #### Geometry - Grade: 0.01 - Grade Unit: % - Intercept: 10.06 m - True Width: 6.036 m - From: 592.66 m - To: 602.72 m - Intercept Depth: 592.66 m #### Classification - Program: exploration - Sample Type: drill - Group ID: 26-2654-04:592.66-602.72 #### QA/QC - Laboratory: ALS Laboratories - QA/QC Disclosed: Yes - Lab Certified: Yes - QP Signed: Yes - QA/QC Methods: standards, blanks #### Review - Needs Review: No - Interp. Status: scored - Historical: No #### Dates - Event date: 2026-10-14T00:00:00.000Z Reasoning: While the zinc grade is very low, this intercept indicates a broad zone of mineralization, primarily copper-silver, in the step-out area. - Positive factor: Significant intercept length in a step-out hole - Positive factor: True width estimated at 60% of downhole length - Negative factor: Very low zinc grade Evidence · table > 0.01 Context: 10.06 #### Tags used in scoring **True Width Disclosed** Polarity: positive Definition: Actual thickness perpendicular to structure is stated, not just downhole length. Why it applies: true\_width\_m is 6.036 **QA/QC Disclosed** Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Why it applies: qaqc\_disclosed is true **Cut-off Undisclosed** Polarity: negative Definition: High-grade interval reported without stating the cut-off grade used for compositing. Why it applies: no cutoff\_grade was stated **Nearology Play** Polarity: neutral Definition: Value premise rests on proximity to a known deposit rather than own results. Why it applies: proximity is offered as the value premise: "- 1.4m of 9 g/t Ag, \*\*0.49% Cu\*\* - Four rigs continue to drill at Ballywire, with a fifth rig drilling at the Company's" ### 26-2654-04 [Link to this fact](https://atlas-staging.minestarters.com/news/group-eleven-intersects-24m-of-mineralization-including-6-3m-of-7-9-zn-pb-and-14--40fd1b68-bb38-4bb8-9303-861389f4e9e5#fact-drill-facts-20) Ballywire · lead #### Identity - Hole ID: 26-2654-04 - Project: Ballywire - Commodity: lead - Region: ireland - Reported Region: ireland - Ticker: ZNG.V #### Geometry - Grade: 0.01 - Grade Unit: % - Intercept: 10.06 m - True Width: 6.036 m - From: 592.66 m - To: 602.72 m - Intercept Depth: 592.66 m #### Classification - Program: exploration - Sample Type: drill - Group ID: 26-2654-04:592.66-602.72 #### QA/QC - Laboratory: ALS Laboratories - QA/QC Disclosed: Yes - Lab Certified: Yes - QP Signed: Yes - QA/QC Methods: standards, blanks #### Review - Needs Review: No - Interp. Status: scored - Historical: No #### Dates - Event date: 2026-10-14T00:00:00.000Z Reasoning: While the lead grade is very low, this intercept indicates a broad zone of mineralization, primarily copper-silver, in the step-out area. - Positive factor: Significant intercept length in a step-out hole - Positive factor: True width estimated at 60% of downhole length - Negative factor: Very low lead grade Evidence · table > 0.01 Context: 10.06 #### Tags used in scoring **True Width Disclosed** Polarity: positive Definition: Actual thickness perpendicular to structure is stated, not just downhole length. Why it applies: true\_width\_m is 6.036 **QA/QC Disclosed** Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Why it applies: qaqc\_disclosed is true **Cut-off Undisclosed** Polarity: negative Definition: High-grade interval reported without stating the cut-off grade used for compositing. Why it applies: no cutoff\_grade was stated **Nearology Play** Polarity: neutral Definition: Value premise rests on proximity to a known deposit rather than own results. Why it applies: proximity is offered as the value premise: "- 1.4m of 9 g/t Ag, \*\*0.49% Cu\*\* - Four rigs continue to drill at Ballywire, with a fifth rig drilling at the Company's" ### 26-2654-04 [Link to this fact](https://atlas-staging.minestarters.com/news/group-eleven-intersects-24m-of-mineralization-including-6-3m-of-7-9-zn-pb-and-14--40fd1b68-bb38-4bb8-9303-861389f4e9e5#fact-drill-facts-21) Ballywire · silver #### Identity - Hole ID: 26-2654-04 - Project: Ballywire - Commodity: silver - Region: ireland - Reported Region: ireland - Ticker: ZNG.V #### Geometry - Grade: 7.6 - Grade Unit: g/t - Intercept: 10.06 m - True Width: 6.036 m - From: 592.66 m - To: 602.72 m - Intercept Depth: 592.66 m #### Classification - Program: exploration - Sample Type: drill - Group ID: 26-2654-04:592.66-602.72 #### QA/QC - Laboratory: ALS Laboratories - QA/QC Disclosed: Yes - Lab Certified: Yes - QP Signed: Yes - QA/QC Methods: standards, blanks #### Review - Needs Review: No - Interp. Status: scored - Historical: No #### Dates - Event date: 2026-10-14T00:00:00.000Z Reasoning: This moderate silver grade over a significant width contributes to the polymetallic nature of the deeper mineralization in the step-out hole. - Positive factor: Moderate silver grade over a significant width - Positive factor: True width estimated at 60% of downhole length Evidence · table > 7.6 Context: 10.06 #### Tags used in scoring **True Width Disclosed** Polarity: positive Definition: Actual thickness perpendicular to structure is stated, not just downhole length. Why it applies: true\_width\_m is 6.036 **QA/QC Disclosed** Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Why it applies: qaqc\_disclosed is true **Cut-off Undisclosed** Polarity: negative Definition: High-grade interval reported without stating the cut-off grade used for compositing. Why it applies: no cutoff\_grade was stated **Nearology Play** Polarity: neutral Definition: Value premise rests on proximity to a known deposit rather than own results. Why it applies: proximity is offered as the value premise: "- 1.4m of 9 g/t Ag, \*\*0.49% Cu\*\* - Four rigs continue to drill at Ballywire, with a fifth rig drilling at the Company's" ### 26-2654-04 [Link to this fact](https://atlas-staging.minestarters.com/news/group-eleven-intersects-24m-of-mineralization-including-6-3m-of-7-9-zn-pb-and-14--40fd1b68-bb38-4bb8-9303-861389f4e9e5#fact-drill-facts-22) Ballywire · copper #### Identity - Hole ID: 26-2654-04 - Project: Ballywire - Commodity: copper - Region: ireland - Reported Region: ireland - Ticker: ZNG.V #### Geometry - Grade: 0.14 - Grade Unit: % - Intercept: 10.06 m - True Width: 6.036 m - From: 592.66 m - To: 602.72 m - Intercept Depth: 592.66 m #### Classification - Program: exploration - Sample Type: drill - Group ID: 26-2654-04:592.66-602.72 #### QA/QC - Laboratory: ALS Laboratories - QA/QC Disclosed: Yes - Lab Certified: Yes - QP Signed: Yes - QA/QC Methods: standards, blanks #### Review - Needs Review: No - Interp. Status: scored - Historical: No #### Dates - Event date: 2026-10-14T00:00:00.000Z Reasoning: This moderate copper grade over a significant width contributes to the polymetallic nature of the deeper mineralization in the step-out hole. - Positive factor: Moderate copper grade over a significant width - Positive factor: True width estimated at 60% of downhole length Evidence · table > 0.14 Context: 10.06 #### Tags used in scoring **True Width Disclosed** Polarity: positive Definition: Actual thickness perpendicular to structure is stated, not just downhole length. Why it applies: true\_width\_m is 6.036 **QA/QC Disclosed** Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Why it applies: qaqc\_disclosed is true **Cut-off Undisclosed** Polarity: negative Definition: High-grade interval reported without stating the cut-off grade used for compositing. Why it applies: no cutoff\_grade was stated **Nearology Play** Polarity: neutral Definition: Value premise rests on proximity to a known deposit rather than own results. Why it applies: proximity is offered as the value premise: "- 1.4m of 9 g/t Ag, \*\*0.49% Cu\*\* - Four rigs continue to drill at Ballywire, with a fifth rig drilling at the Company's" ### 26-2654-04 [Link to this fact](https://atlas-staging.minestarters.com/news/group-eleven-intersects-24m-of-mineralization-including-6-3m-of-7-9-zn-pb-and-14--40fd1b68-bb38-4bb8-9303-861389f4e9e5#fact-drill-facts-23) Ballywire · zinc #### Identity - Hole ID: 26-2654-04 - Project: Ballywire - Commodity: zinc - Region: ireland - Reported Region: ireland - Ticker: ZNG.V #### Geometry - Grade: 0.01 - Grade Unit: % - Intercept: 6.32 m - True Width: 3.792 m - From: 593.58 m - To: 599.9 m - Intercept Depth: 592.66 m #### Classification - Program: exploration - Sample Type: drill - Group ID: 26-2654-04:593.58-599.9 #### QA/QC - Laboratory: ALS Laboratories - QA/QC Disclosed: Yes - Lab Certified: Yes - QP Signed: Yes - QA/QC Methods: standards, blanks #### Review - Needs Review: No - Interp. Status: scored - Historical: No #### Dates - Event date: 2026-10-14T00:00:00.000Z Reasoning: While the zinc grade is very low, this intercept indicates a continuous zone of copper-silver mineralization at depth in the step-out hole. - Positive factor: Good intercept length for deeper mineralization - Positive factor: True width estimated at 60% of downhole length - Negative factor: Very low zinc grade Evidence · table > 0.01 Context: 6.32 #### Tags used in scoring **True Width Disclosed** Polarity: positive Definition: Actual thickness perpendicular to structure is stated, not just downhole length. Why it applies: true\_width\_m is 3.792 **QA/QC Disclosed** Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Why it applies: qaqc\_disclosed is true **Cut-off Undisclosed** Polarity: negative Definition: High-grade interval reported without stating the cut-off grade used for compositing. Why it applies: no cutoff\_grade was stated **Nearology Play** Polarity: neutral Definition: Value premise rests on proximity to a known deposit rather than own results. Why it applies: proximity is offered as the value premise: "- 1.4m of 9 g/t Ag, \*\*0.49% Cu\*\* - Four rigs continue to drill at Ballywire, with a fifth rig drilling at the Company's" ### 26-2654-04 [Link to this fact](https://atlas-staging.minestarters.com/news/group-eleven-intersects-24m-of-mineralization-including-6-3m-of-7-9-zn-pb-and-14--40fd1b68-bb38-4bb8-9303-861389f4e9e5#fact-drill-facts-24) Ballywire · silver #### Identity - Hole ID: 26-2654-04 - Project: Ballywire - Commodity: silver - Region: ireland - Reported Region: ireland - Ticker: ZNG.V #### Geometry - Grade: 10.9 - Grade Unit: g/t - Intercept: 6.32 m - True Width: 3.792 m - From: 593.58 m - To: 599.9 m - Intercept Depth: 592.66 m #### Classification - Program: exploration - Sample Type: drill - Group ID: 26-2654-04:593.58-599.9 #### QA/QC - Laboratory: ALS Laboratories - QA/QC Disclosed: Yes - Lab Certified: Yes - QP Signed: Yes - QA/QC Methods: standards, blanks #### Review - Needs Review: No - Interp. Status: scored - Historical: No #### Dates - Event date: 2026-10-14T00:00:00.000Z Reasoning: This good silver grade over a significant width enhances the polymetallic nature of the deeper mineralization in the step-out hole. - Positive factor: Good silver grade over a significant width - Positive factor: True width estimated at 60% of downhole length Evidence · table > 10.9 Context: 6.32 #### Tags used in scoring **True Width Disclosed** Polarity: positive Definition: Actual thickness perpendicular to structure is stated, not just downhole length. Why it applies: true\_width\_m is 3.792 **QA/QC Disclosed** Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Why it applies: qaqc\_disclosed is true **Cut-off Undisclosed** Polarity: negative Definition: High-grade interval reported without stating the cut-off grade used for compositing. Why it applies: no cutoff\_grade was stated **Nearology Play** Polarity: neutral Definition: Value premise rests on proximity to a known deposit rather than own results. Why it applies: proximity is offered as the value premise: "- 1.4m of 9 g/t Ag, \*\*0.49% Cu\*\* - Four rigs continue to drill at Ballywire, with a fifth rig drilling at the Company's" ### 26-2654-04 [Link to this fact](https://atlas-staging.minestarters.com/news/group-eleven-intersects-24m-of-mineralization-including-6-3m-of-7-9-zn-pb-and-14--40fd1b68-bb38-4bb8-9303-861389f4e9e5#fact-drill-facts-25) Ballywire · copper #### Identity - Hole ID: 26-2654-04 - Project: Ballywire - Commodity: copper - Region: ireland - Reported Region: ireland - Ticker: ZNG.V #### Geometry - Grade: 0.2 - Grade Unit: % - Intercept: 6.32 m - True Width: 3.792 m - From: 593.58 m - To: 599.9 m - Intercept Depth: 592.66 m #### Classification - Program: exploration - Sample Type: drill - Group ID: 26-2654-04:593.58-599.9 #### QA/QC - Laboratory: ALS Laboratories - QA/QC Disclosed: Yes - Lab Certified: Yes - QP Signed: Yes - QA/QC Methods: standards, blanks #### Review - Needs Review: No - Interp. Status: scored - Historical: No #### Dates - Event date: 2026-10-14T00:00:00.000Z Reasoning: This good copper grade over a significant width enhances the polymetallic nature of the deeper mineralization in the step-out hole. - Positive factor: Good copper grade over a significant width - Positive factor: True width estimated at 60% of downhole length Evidence · table > 0.20 Context: 6.32 #### Tags used in scoring **True Width Disclosed** Polarity: positive Definition: Actual thickness perpendicular to structure is stated, not just downhole length. Why it applies: true\_width\_m is 3.792 **QA/QC Disclosed** Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Why it applies: qaqc\_disclosed is true **Cut-off Undisclosed** Polarity: negative Definition: High-grade interval reported without stating the cut-off grade used for compositing. Why it applies: no cutoff\_grade was stated **Nearology Play** Polarity: neutral Definition: Value premise rests on proximity to a known deposit rather than own results. Why it applies: proximity is offered as the value premise: "- 1.4m of 9 g/t Ag, \*\*0.49% Cu\*\* - Four rigs continue to drill at Ballywire, with a fifth rig drilling at the Company's" ### 26-2654-04 [Link to this fact](https://atlas-staging.minestarters.com/news/group-eleven-intersects-24m-of-mineralization-including-6-3m-of-7-9-zn-pb-and-14--40fd1b68-bb38-4bb8-9303-861389f4e9e5#fact-drill-facts-26) Ballywire · antimony #### Identity - Hole ID: 26-2654-04 - Project: Ballywire - Commodity: antimony - Region: ireland - Reported Region: ireland - Ticker: ZNG.V #### Geometry - Grade: 0.01 - Grade Unit: % - Intercept: 6.32 m - True Width: 3.792 m - From: 593.58 m - To: 599.9 m - Intercept Depth: 592.66 m #### Classification - Program: exploration - Sample Type: drill - Group ID: 26-2654-04:593.58-599.9 #### QA/QC - Laboratory: ALS Laboratories - QA/QC Disclosed: Yes - Lab Certified: Yes - QP Signed: Yes - QA/QC Methods: standards, blanks #### Review - Needs Review: No - Interp. Status: scored - Historical: No #### Dates - Event date: 2026-10-14T00:00:00.000Z Reasoning: The presence of antimony, even at a low grade, contributes to the polymetallic nature of the deeper mineralization in the step-out hole. - Positive factor: Presence of antimony, indicating polymetallic mineralization - Positive factor: True width estimated at 60% of downhole length - Negative factor: Low antimony grade Evidence · table > 0.01 Context: 6.32 #### Tags used in scoring **True Width Disclosed** Polarity: positive Definition: Actual thickness perpendicular to structure is stated, not just downhole length. Why it applies: true\_width\_m is 3.792 **QA/QC Disclosed** Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Why it applies: qaqc\_disclosed is true **Cut-off Undisclosed** Polarity: negative Definition: High-grade interval reported without stating the cut-off grade used for compositing. Why it applies: no cutoff\_grade was stated **Nearology Play** Polarity: neutral Definition: Value premise rests on proximity to a known deposit rather than own results. Why it applies: proximity is offered as the value premise: "- 1.4m of 9 g/t Ag, \*\*0.49% Cu\*\* - Four rigs continue to drill at Ballywire, with a fifth rig drilling at the Company's" ### 26-2654-04 [Link to this fact](https://atlas-staging.minestarters.com/news/group-eleven-intersects-24m-of-mineralization-including-6-3m-of-7-9-zn-pb-and-14--40fd1b68-bb38-4bb8-9303-861389f4e9e5#fact-drill-facts-27) Ballywire · zinc #### Identity - Hole ID: 26-2654-04 - Project: Ballywire - Commodity: zinc - Region: ireland - Reported Region: ireland - Ticker: ZNG.V #### Geometry - Grade: 0.01 - Grade Unit: % - Intercept: 1.65 m - True Width: 0.99 m - From: 598.25 m - To: 599.9 m - Intercept Depth: 592.66 m #### Classification - Program: exploration - Sample Type: drill - Group ID: 26-2654-04:598.25-599.9 #### QA/QC - Laboratory: ALS Laboratories - QA/QC Disclosed: Yes - Lab Certified: Yes - QP Signed: Yes - QA/QC Methods: standards, blanks #### Review - Needs Review: No - Interp. Status: scored - Historical: No #### Dates - Event date: 2026-10-14T00:00:00.000Z Reasoning: While the zinc grade is very low, this narrow intercept shows a higher-grade copper-silver zone within the deeper mineralization. - Positive factor: True width estimated at 60% of downhole length - Negative factor: Very low zinc grade - Negative factor: Narrow intercept Evidence · table > 0.01 Context: 1.65 #### Tags used in scoring **True Width Disclosed** Polarity: positive Definition: Actual thickness perpendicular to structure is stated, not just downhole length. Why it applies: true\_width\_m is 0.99 **QA/QC Disclosed** Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Why it applies: qaqc\_disclosed is true **Cut-off Undisclosed** Polarity: negative Definition: High-grade interval reported without stating the cut-off grade used for compositing. Why it applies: no cutoff\_grade was stated **Nearology Play** Polarity: neutral Definition: Value premise rests on proximity to a known deposit rather than own results. Why it applies: proximity is offered as the value premise: "- 1.4m of 9 g/t Ag, \*\*0.49% Cu\*\* - Four rigs continue to drill at Ballywire, with a fifth rig drilling at the Company's" ### 26-2654-04 [Link to this fact](https://atlas-staging.minestarters.com/news/group-eleven-intersects-24m-of-mineralization-including-6-3m-of-7-9-zn-pb-and-14--40fd1b68-bb38-4bb8-9303-861389f4e9e5#fact-drill-facts-28) Ballywire · silver #### Identity - Hole ID: 26-2654-04 - Project: Ballywire - Commodity: silver - Region: ireland - Reported Region: ireland - Ticker: ZNG.V #### Geometry - Grade: 29.5 - Grade Unit: g/t - Intercept: 1.65 m - True Width: 0.99 m - From: 598.25 m - To: 599.9 m - Intercept Depth: 592.66 m #### Classification - Program: exploration - Sample Type: drill - Group ID: 26-2654-04:598.25-599.9 #### QA/QC - Laboratory: ALS Laboratories - QA/QC Disclosed: Yes - Lab Certified: Yes - QP Signed: Yes - QA/QC Methods: standards, blanks #### Review - Needs Review: No - Interp. Status: scored - Historical: No #### Dates - Event date: 2026-10-14T00:00:00.000Z Reasoning: This high-grade silver intercept significantly enhances the polymetallic nature of the deeper mineralization, indicating a valuable zone. - Positive factor: High-grade silver over a good width for deeper mineralization - Positive factor: True width estimated at 60% of downhole length Evidence · table > 29.5 Context: 1.65 #### Tags used in scoring **True Width Disclosed** Polarity: positive Definition: Actual thickness perpendicular to structure is stated, not just downhole length. Why it applies: true\_width\_m is 0.99 **QA/QC Disclosed** Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Why it applies: qaqc\_disclosed is true **Cut-off Undisclosed** Polarity: negative Definition: High-grade interval reported without stating the cut-off grade used for compositing. Why it applies: no cutoff\_grade was stated **Nearology Play** Polarity: neutral Definition: Value premise rests on proximity to a known deposit rather than own results. Why it applies: proximity is offered as the value premise: "- 1.4m of 9 g/t Ag, \*\*0.49% Cu\*\* - Four rigs continue to drill at Ballywire, with a fifth rig drilling at the Company's" ### 26-2654-04 [Link to this fact](https://atlas-staging.minestarters.com/news/group-eleven-intersects-24m-of-mineralization-including-6-3m-of-7-9-zn-pb-and-14--40fd1b68-bb38-4bb8-9303-861389f4e9e5#fact-drill-facts-29) Ballywire · copper #### Identity - Hole ID: 26-2654-04 - Project: Ballywire - Commodity: copper - Region: ireland - Reported Region: ireland - Ticker: ZNG.V #### Geometry - Grade: 0.7 - Grade Unit: % - Intercept: 1.65 m - True Width: 0.99 m - From: 598.25 m - To: 599.9 m - Intercept Depth: 592.66 m #### Classification - Program: exploration - Sample Type: drill - Group ID: 26-2654-04:598.25-599.9 #### QA/QC - Laboratory: ALS Laboratories - QA/QC Disclosed: Yes - Lab Certified: Yes - QP Signed: Yes - QA/QC Methods: standards, blanks #### Review - Needs Review: No - Interp. Status: scored - Historical: No #### Dates - Event date: 2026-10-14T00:00:00.000Z Reasoning: This high-grade copper intercept significantly enhances the polymetallic nature of the deeper mineralization, indicating a valuable zone. - Positive factor: High-grade copper over a good width for deeper mineralization - Positive factor: True width estimated at 60% of downhole length Evidence · table > 0.70 Context: 1.65 #### Tags used in scoring **True Width Disclosed** Polarity: positive Definition: Actual thickness perpendicular to structure is stated, not just downhole length. Why it applies: true\_width\_m is 0.99 **QA/QC Disclosed** Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Why it applies: qaqc\_disclosed is true **Cut-off Undisclosed** Polarity: negative Definition: High-grade interval reported without stating the cut-off grade used for compositing. Why it applies: no cutoff\_grade was stated **Nearology Play** Polarity: neutral Definition: Value premise rests on proximity to a known deposit rather than own results. Why it applies: proximity is offered as the value premise: "- 1.4m of 9 g/t Ag, \*\*0.49% Cu\*\* - Four rigs continue to drill at Ballywire, with a fifth rig drilling at the Company's" ### 26-2654-04 [Link to this fact](https://atlas-staging.minestarters.com/news/group-eleven-intersects-24m-of-mineralization-including-6-3m-of-7-9-zn-pb-and-14--40fd1b68-bb38-4bb8-9303-861389f4e9e5#fact-drill-facts-30) Ballywire · antimony #### Identity - Hole ID: 26-2654-04 - Project: Ballywire - Commodity: antimony - Region: ireland - Reported Region: ireland - Ticker: ZNG.V #### Geometry - Grade: 0.02 - Grade Unit: % - Intercept: 1.65 m - True Width: 0.99 m - From: 598.25 m - To: 599.9 m - Intercept Depth: 592.66 m #### Classification - Program: exploration - Sample Type: drill - Group ID: 26-2654-04:598.25-599.9 #### QA/QC - Laboratory: ALS Laboratories - QA/QC Disclosed: Yes - Lab Certified: Yes - QP Signed: Yes - QA/QC Methods: standards, blanks #### Review - Needs Review: No - Interp. Status: scored - Historical: No #### Dates - Event date: 2026-10-14T00:00:00.000Z Reasoning: The presence of antimony, even at a low grade, contributes to the polymetallic nature of this higher-grade deeper mineralization. - Positive factor: Presence of antimony, indicating polymetallic mineralization - Positive factor: True width estimated at 60% of downhole length - Negative factor: Low antimony grade Evidence · table > 0.02 Context: 1.65 #### Tags used in scoring **True Width Disclosed** Polarity: positive Definition: Actual thickness perpendicular to structure is stated, not just downhole length. Why it applies: true\_width\_m is 0.99 **QA/QC Disclosed** Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Why it applies: qaqc\_disclosed is true **Cut-off Undisclosed** Polarity: negative Definition: High-grade interval reported without stating the cut-off grade used for compositing. Why it applies: no cutoff\_grade was stated **Nearology Play** Polarity: neutral Definition: Value premise rests on proximity to a known deposit rather than own results. Why it applies: proximity is offered as the value premise: "- 1.4m of 9 g/t Ag, \*\*0.49% Cu\*\* - Four rigs continue to drill at Ballywire, with a fifth rig drilling at the Company's" ### 26-2654-04 [Link to this fact](https://atlas-staging.minestarters.com/news/group-eleven-intersects-24m-of-mineralization-including-6-3m-of-7-9-zn-pb-and-14--40fd1b68-bb38-4bb8-9303-861389f4e9e5#fact-drill-facts-31) Ballywire · zinc #### Identity - Hole ID: 26-2654-04 - Project: Ballywire - Commodity: zinc - Region: ireland - Reported Region: ireland - Ticker: ZNG.V #### Geometry - Grade: 0.01 - Grade Unit: % - Intercept: 0.85 m - True Width: 0.51 m - From: 598.25 m - To: 599.1 m - Intercept Depth: 592.66 m #### Classification - Program: exploration - Sample Type: drill - Group ID: 26-2654-04:598.25-599.1 #### QA/QC - Laboratory: ALS Laboratories - QA/QC Disclosed: Yes - Lab Certified: Yes - QP Signed: Yes - QA/QC Methods: standards, blanks #### Review - Needs Review: No - Interp. Status: scored - Historical: No #### Dates - Event date: 2026-10-14T00:00:00.000Z Reasoning: While the zinc grade is very low, this very narrow intercept shows the highest-grade copper-silver zone within the deeper mineralization. - Positive factor: True width estimated at 60% of downhole length - Negative factor: Very low zinc grade - Negative factor: Narrow intercept Evidence · table > 0.01 Context: 0.85 #### Tags used in scoring **True Width Disclosed** Polarity: positive Definition: Actual thickness perpendicular to structure is stated, not just downhole length. Why it applies: true\_width\_m is 0.51 **QA/QC Disclosed** Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Why it applies: qaqc\_disclosed is true **Cut-off Undisclosed** Polarity: negative Definition: High-grade interval reported without stating the cut-off grade used for compositing. Why it applies: no cutoff\_grade was stated **Nearology Play** Polarity: neutral Definition: Value premise rests on proximity to a known deposit rather than own results. Why it applies: proximity is offered as the value premise: "- 1.4m of 9 g/t Ag, \*\*0.49% Cu\*\* - Four rigs continue to drill at Ballywire, with a fifth rig drilling at the Company's" ### 26-2654-04 [Link to this fact](https://atlas-staging.minestarters.com/news/group-eleven-intersects-24m-of-mineralization-including-6-3m-of-7-9-zn-pb-and-14--40fd1b68-bb38-4bb8-9303-861389f4e9e5#fact-drill-facts-32) Ballywire · silver #### Identity - Hole ID: 26-2654-04 - Project: Ballywire - Commodity: silver - Region: ireland - Reported Region: ireland - Ticker: ZNG.V #### Geometry - Grade: 29.6 - Grade Unit: g/t - Intercept: 0.85 m - True Width: 0.51 m - From: 598.25 m - To: 599.1 m - Intercept Depth: 592.66 m #### Classification - Program: exploration - Sample Type: drill - Group ID: 26-2654-04:598.25-599.1 #### QA/QC - Laboratory: ALS Laboratories - QA/QC Disclosed: Yes - Lab Certified: Yes - QP Signed: Yes - QA/QC Methods: standards, blanks #### Review - Needs Review: No - Interp. Status: scored - Historical: No #### Dates - Event date: 2026-10-14T00:00:00.000Z Reasoning: This high-grade silver intercept further enhances the polymetallic nature of the deeper mineralization, indicating a valuable, concentrated zone. - Positive factor: High-grade silver over a narrow but significant interval for deeper mineralization - Positive factor: True width estimated at 60% of downhole length Evidence · table > 29.6 Context: 0.85 #### Tags used in scoring **True Width Disclosed** Polarity: positive Definition: Actual thickness perpendicular to structure is stated, not just downhole length. Why it applies: true\_width\_m is 0.51 **QA/QC Disclosed** Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Why it applies: qaqc\_disclosed is true **Cut-off Undisclosed** Polarity: negative Definition: High-grade interval reported without stating the cut-off grade used for compositing. Why it applies: no cutoff\_grade was stated **Nearology Play** Polarity: neutral Definition: Value premise rests on proximity to a known deposit rather than own results. Why it applies: proximity is offered as the value premise: "- 1.4m of 9 g/t Ag, \*\*0.49% Cu\*\* - Four rigs continue to drill at Ballywire, with a fifth rig drilling at the Company's" ### 26-2654-04 [Link to this fact](https://atlas-staging.minestarters.com/news/group-eleven-intersects-24m-of-mineralization-including-6-3m-of-7-9-zn-pb-and-14--40fd1b68-bb38-4bb8-9303-861389f4e9e5#fact-drill-facts-33) Ballywire · copper #### Identity - Hole ID: 26-2654-04 - Project: Ballywire - Commodity: copper - Region: ireland - Reported Region: ireland - Ticker: ZNG.V #### Geometry - Grade: 1.17 - Grade Unit: % - Intercept: 0.85 m - True Width: 0.51 m - From: 598.25 m - To: 599.1 m - Intercept Depth: 592.66 m #### Classification - Program: exploration - Sample Type: drill - Group ID: 26-2654-04:598.25-599.1 #### QA/QC - Laboratory: ALS Laboratories - QA/QC Disclosed: Yes - Lab Certified: Yes - QP Signed: Yes - QA/QC Methods: standards, blanks #### Review - Needs Review: No - Interp. Status: scored - Historical: No #### Dates - Event date: 2026-10-14T00:00:00.000Z Reasoning: This very high-grade copper intercept further enhances the polymetallic nature of the deeper mineralization, indicating a valuable, concentrated zone. - Positive factor: Very high-grade copper over a narrow but significant interval for deeper mineralization - Positive factor: True width estimated at 60% of downhole length Evidence · table > 1.17 Context: 0.85 #### Tags used in scoring **True Width Disclosed** Polarity: positive Definition: Actual thickness perpendicular to structure is stated, not just downhole length. Why it applies: true\_width\_m is 0.51 **QA/QC Disclosed** Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Why it applies: qaqc\_disclosed is true **Cut-off Undisclosed** Polarity: negative Definition: High-grade interval reported without stating the cut-off grade used for compositing. Why it applies: no cutoff\_grade was stated **Nearology Play** Polarity: neutral Definition: Value premise rests on proximity to a known deposit rather than own results. Why it applies: proximity is offered as the value premise: "- 1.4m of 9 g/t Ag, \*\*0.49% Cu\*\* - Four rigs continue to drill at Ballywire, with a fifth rig drilling at the Company's" ### 26-2654-04 [Link to this fact](https://atlas-staging.minestarters.com/news/group-eleven-intersects-24m-of-mineralization-including-6-3m-of-7-9-zn-pb-and-14--40fd1b68-bb38-4bb8-9303-861389f4e9e5#fact-drill-facts-34) Ballywire · antimony #### Identity - Hole ID: 26-2654-04 - Project: Ballywire - Commodity: antimony - Region: ireland - Reported Region: ireland - Ticker: ZNG.V #### Geometry - Grade: 0.03 - Grade Unit: % - Intercept: 0.85 m - True Width: 0.51 m - From: 598.25 m - To: 599.1 m - Intercept Depth: 592.66 m #### Classification - Program: exploration - Sample Type: drill - Group ID: 26-2654-04:598.25-599.1 #### QA/QC - Laboratory: ALS Laboratories - QA/QC Disclosed: Yes - Lab Certified: Yes - QP Signed: Yes - QA/QC Methods: standards, blanks #### Review - Needs Review: No - Interp. Status: scored - Historical: No #### Dates - Event date: 2026-10-14T00:00:00.000Z Reasoning: The presence of antimony, even at a low grade, contributes to the polymetallic nature of this very high-grade deeper mineralization. - Positive factor: Presence of antimony, indicating polymetallic mineralization - Positive factor: True width estimated at 60% of downhole length - Negative factor: Low antimony grade Evidence · table > 0.03 Context: 0.85 #### Tags used in scoring **True Width Disclosed** Polarity: positive Definition: Actual thickness perpendicular to structure is stated, not just downhole length. Why it applies: true\_width\_m is 0.51 **QA/QC Disclosed** Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Why it applies: qaqc\_disclosed is true **Cut-off Undisclosed** Polarity: negative Definition: High-grade interval reported without stating the cut-off grade used for compositing. Why it applies: no cutoff\_grade was stated **Nearology Play** Polarity: neutral Definition: Value premise rests on proximity to a known deposit rather than own results. Why it applies: proximity is offered as the value premise: "- 1.4m of 9 g/t Ag, \*\*0.49% Cu\*\* - Four rigs continue to drill at Ballywire, with a fifth rig drilling at the Company's" ### 26-2654-04 [Link to this fact](https://atlas-staging.minestarters.com/news/group-eleven-intersects-24m-of-mineralization-including-6-3m-of-7-9-zn-pb-and-14--40fd1b68-bb38-4bb8-9303-861389f4e9e5#fact-drill-facts-35) Ballywire · zinc #### Identity - Hole ID: 26-2654-04 - Project: Ballywire - Commodity: zinc - Region: ireland - Reported Region: ireland - Ticker: ZNG.V #### Geometry - Grade: 0.01 - Grade Unit: % - Intercept: 4.46 m - True Width: 2.676 m - From: 690.66 m - To: 695.12 m - Intercept Depth: 690.66 m #### Classification - Program: exploration - Sample Type: drill - Group ID: 26-2654-04:690.66-695.12 #### QA/QC - Laboratory: ALS Laboratories - QA/QC Disclosed: Yes - Lab Certified: Yes - QP Signed: Yes - QA/QC Methods: standards, blanks #### Review - Needs Review: No - Interp. Status: scored - Historical: No #### Dates - Event date: 2026-10-14T00:00:00.000Z Reasoning: While the zinc grade is very low, this intercept indicates another zone of copper-silver mineralization at greater depth in the step-out hole. - Positive factor: Good intercept length for deeper mineralization - Positive factor: True width estimated at 60% of downhole length - Negative factor: Very low zinc grade Evidence · table > 0.01 Context: 4.46 #### Tags used in scoring **True Width Disclosed** Polarity: positive Definition: Actual thickness perpendicular to structure is stated, not just downhole length. Why it applies: true\_width\_m is 2.676 **QA/QC Disclosed** Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Why it applies: qaqc\_disclosed is true **Cut-off Undisclosed** Polarity: negative Definition: High-grade interval reported without stating the cut-off grade used for compositing. Why it applies: no cutoff\_grade was stated **Nearology Play** Polarity: neutral Definition: Value premise rests on proximity to a known deposit rather than own results. Why it applies: proximity is offered as the value premise: "- 1.4m of 9 g/t Ag, \*\*0.49% Cu\*\* - Four rigs continue to drill at Ballywire, with a fifth rig drilling at the Company's" ### 26-2654-04 [Link to this fact](https://atlas-staging.minestarters.com/news/group-eleven-intersects-24m-of-mineralization-including-6-3m-of-7-9-zn-pb-and-14--40fd1b68-bb38-4bb8-9303-861389f4e9e5#fact-drill-facts-36) Ballywire · silver #### Identity - Hole ID: 26-2654-04 - Project: Ballywire - Commodity: silver - Region: ireland - Reported Region: ireland - Ticker: ZNG.V #### Geometry - Grade: 7.8 - Grade Unit: g/t - Intercept: 4.46 m - True Width: 2.676 m - From: 690.66 m - To: 695.12 m - Intercept Depth: 690.66 m #### Classification - Program: exploration - Sample Type: drill - Group ID: 26-2654-04:690.66-695.12 #### QA/QC - Laboratory: ALS Laboratories - QA/QC Disclosed: Yes - Lab Certified: Yes - QP Signed: Yes - QA/QC Methods: standards, blanks #### Review - Needs Review: No - Interp. Status: scored - Historical: No #### Dates - Event date: 2026-10-14T00:00:00.000Z Reasoning: This moderate silver grade over a good width contributes to the polymetallic nature of the deeper mineralization in the step-out hole. - Positive factor: Moderate silver grade over a good width for deeper mineralization - Positive factor: True width estimated at 60% of downhole length Evidence · table > 7.8 Context: 4.46 #### Tags used in scoring **True Width Disclosed** Polarity: positive Definition: Actual thickness perpendicular to structure is stated, not just downhole length. Why it applies: true\_width\_m is 2.676 **QA/QC Disclosed** Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Why it applies: qaqc\_disclosed is true **Cut-off Undisclosed** Polarity: negative Definition: High-grade interval reported without stating the cut-off grade used for compositing. Why it applies: no cutoff\_grade was stated **Nearology Play** Polarity: neutral Definition: Value premise rests on proximity to a known deposit rather than own results. Why it applies: proximity is offered as the value premise: "- 1.4m of 9 g/t Ag, \*\*0.49% Cu\*\* - Four rigs continue to drill at Ballywire, with a fifth rig drilling at the Company's" ### 26-2654-04 [Link to this fact](https://atlas-staging.minestarters.com/news/group-eleven-intersects-24m-of-mineralization-including-6-3m-of-7-9-zn-pb-and-14--40fd1b68-bb38-4bb8-9303-861389f4e9e5#fact-drill-facts-37) Ballywire · copper #### Identity - Hole ID: 26-2654-04 - Project: Ballywire - Commodity: copper - Region: ireland - Reported Region: ireland - Ticker: ZNG.V #### Geometry - Grade: 0.24 - Grade Unit: % - Intercept: 4.46 m - True Width: 2.676 m - From: 690.66 m - To: 695.12 m - Intercept Depth: 690.66 m #### Classification - Program: exploration - Sample Type: drill - Group ID: 26-2654-04:690.66-695.12 #### QA/QC - Laboratory: ALS Laboratories - QA/QC Disclosed: Yes - Lab Certified: Yes - QP Signed: Yes - QA/QC Methods: standards, blanks #### Review - Needs Review: No - Interp. Status: scored - Historical: No #### Dates - Event date: 2026-10-14T00:00:00.000Z Reasoning: This good copper grade over a good width contributes to the polymetallic nature of the deeper mineralization in the step-out hole. - Positive factor: Good copper grade over a good width for deeper mineralization - Positive factor: True width estimated at 60% of downhole length Evidence · table > 0.24 Context: 4.46 #### Tags used in scoring **True Width Disclosed** Polarity: positive Definition: Actual thickness perpendicular to structure is stated, not just downhole length. Why it applies: true\_width\_m is 2.676 **QA/QC Disclosed** Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Why it applies: qaqc\_disclosed is true **Cut-off Undisclosed** Polarity: negative Definition: High-grade interval reported without stating the cut-off grade used for compositing. Why it applies: no cutoff\_grade was stated **Nearology Play** Polarity: neutral Definition: Value premise rests on proximity to a known deposit rather than own results. Why it applies: proximity is offered as the value premise: "- 1.4m of 9 g/t Ag, \*\*0.49% Cu\*\* - Four rigs continue to drill at Ballywire, with a fifth rig drilling at the Company's" ### 26-2654-04 [Link to this fact](https://atlas-staging.minestarters.com/news/group-eleven-intersects-24m-of-mineralization-including-6-3m-of-7-9-zn-pb-and-14--40fd1b68-bb38-4bb8-9303-861389f4e9e5#fact-drill-facts-38) Ballywire · antimony #### Identity - Hole ID: 26-2654-04 - Project: Ballywire - Commodity: antimony - Region: ireland - Reported Region: ireland - Ticker: ZNG.V #### Geometry - Grade: 0.04 - Grade Unit: % - Intercept: 4.46 m - True Width: 2.676 m - From: 690.66 m - To: 695.12 m - Intercept Depth: 690.66 m #### Classification - Program: exploration - Sample Type: drill - Group ID: 26-2654-04:690.66-695.12 #### QA/QC - Laboratory: ALS Laboratories - QA/QC Disclosed: Yes - Lab Certified: Yes - QP Signed: Yes - QA/QC Methods: standards, blanks #### Review - Needs Review: No - Interp. Status: scored - Historical: No #### Dates - Event date: 2026-10-14T00:00:00.000Z Reasoning: The presence of antimony, even at a low grade, contributes to the polymetallic nature of the deeper mineralization in the step-out hole. - Positive factor: Presence of antimony, indicating polymetallic mineralization - Positive factor: True width estimated at 60% of downhole length - Negative factor: Low antimony grade Evidence · table > 0.04 Context: 4.46 #### Tags used in scoring **True Width Disclosed** Polarity: positive Definition: Actual thickness perpendicular to structure is stated, not just downhole length. Why it applies: true\_width\_m is 2.676 **QA/QC Disclosed** Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Why it applies: qaqc\_disclosed is true **Cut-off Undisclosed** Polarity: negative Definition: High-grade interval reported without stating the cut-off grade used for compositing. Why it applies: no cutoff\_grade was stated **Nearology Play** Polarity: neutral Definition: Value premise rests on proximity to a known deposit rather than own results. Why it applies: proximity is offered as the value premise: "- 1.4m of 9 g/t Ag, \*\*0.49% Cu\*\* - Four rigs continue to drill at Ballywire, with a fifth rig drilling at the Company's" ### 26-2654-04 [Link to this fact](https://atlas-staging.minestarters.com/news/group-eleven-intersects-24m-of-mineralization-including-6-3m-of-7-9-zn-pb-and-14--40fd1b68-bb38-4bb8-9303-861389f4e9e5#fact-drill-facts-39) Ballywire · zinc #### Identity - Hole ID: 26-2654-04 - Project: Ballywire - Commodity: zinc - Region: ireland - Reported Region: ireland - Ticker: ZNG.V #### Geometry - Grade: 0.02 - Grade Unit: % - Intercept: 2.49 m - True Width: 1.494 m - From: 690.66 m - To: 693.15 m - Intercept Depth: 690.66 m #### Classification - Program: exploration - Sample Type: drill - Group ID: 26-2654-04:690.66-693.15 #### QA/QC - Laboratory: ALS Laboratories - QA/QC Disclosed: Yes - Lab Certified: Yes - QP Signed: Yes - QA/QC Methods: standards, blanks #### Review - Needs Review: No - Interp. Status: scored - Historical: No #### Dates - Event date: 2026-10-14T00:00:00.000Z Reasoning: While the zinc grade is very low, this narrow intercept shows a higher-grade copper-silver zone within the deeper mineralization. - Positive factor: True width estimated at 60% of downhole length - Negative factor: Very low zinc grade - Negative factor: Narrow intercept Evidence · table > 0.02 Context: 2.49 #### Tags used in scoring **True Width Disclosed** Polarity: positive Definition: Actual thickness perpendicular to structure is stated, not just downhole length. Why it applies: true\_width\_m is 1.494 **QA/QC Disclosed** Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Why it applies: qaqc\_disclosed is true **Cut-off Undisclosed** Polarity: negative Definition: High-grade interval reported without stating the cut-off grade used for compositing. Why it applies: no cutoff\_grade was stated **Nearology Play** Polarity: neutral Definition: Value premise rests on proximity to a known deposit rather than own results. Why it applies: proximity is offered as the value premise: "- 1.4m of 9 g/t Ag, \*\*0.49% Cu\*\* - Four rigs continue to drill at Ballywire, with a fifth rig drilling at the Company's" ### 26-2654-04 [Link to this fact](https://atlas-staging.minestarters.com/news/group-eleven-intersects-24m-of-mineralization-including-6-3m-of-7-9-zn-pb-and-14--40fd1b68-bb38-4bb8-9303-861389f4e9e5#fact-drill-facts-40) Ballywire · silver #### Identity - Hole ID: 26-2654-04 - Project: Ballywire - Commodity: silver - Region: ireland - Reported Region: ireland - Ticker: ZNG.V #### Geometry - Grade: 9.7 - Grade Unit: g/t - Intercept: 2.49 m - True Width: 1.494 m - From: 690.66 m - To: 693.15 m - Intercept Depth: 690.66 m #### Classification - Program: exploration - Sample Type: drill - Group ID: 26-2654-04:690.66-693.15 #### QA/QC - Laboratory: ALS Laboratories - QA/QC Disclosed: Yes - Lab Certified: Yes - QP Signed: Yes - QA/QC Methods: standards, blanks #### Review - Needs Review: No - Interp. Status: scored - Historical: No #### Dates - Event date: 2026-10-14T00:00:00.000Z Reasoning: This good silver grade over a good width enhances the polymetallic nature of the deeper mineralization, indicating a valuable zone. - Positive factor: Good silver grade over a good width for deeper mineralization - Positive factor: True width estimated at 60% of downhole length Evidence · table > 9.7 Context: 2.49 #### Tags used in scoring **True Width Disclosed** Polarity: positive Definition: Actual thickness perpendicular to structure is stated, not just downhole length. Why it applies: true\_width\_m is 1.494 **QA/QC Disclosed** Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Why it applies: qaqc\_disclosed is true **Cut-off Undisclosed** Polarity: negative Definition: High-grade interval reported without stating the cut-off grade used for compositing. Why it applies: no cutoff\_grade was stated **Nearology Play** Polarity: neutral Definition: Value premise rests on proximity to a known deposit rather than own results. Why it applies: proximity is offered as the value premise: "- 1.4m of 9 g/t Ag, \*\*0.49% Cu\*\* - Four rigs continue to drill at Ballywire, with a fifth rig drilling at the Company's" ### 26-2654-04 [Link to this fact](https://atlas-staging.minestarters.com/news/group-eleven-intersects-24m-of-mineralization-including-6-3m-of-7-9-zn-pb-and-14--40fd1b68-bb38-4bb8-9303-861389f4e9e5#fact-drill-facts-41) Ballywire · copper #### Identity - Hole ID: 26-2654-04 - Project: Ballywire - Commodity: copper - Region: ireland - Reported Region: ireland - Ticker: ZNG.V #### Geometry - Grade: 0.32 - Grade Unit: % - Intercept: 2.49 m - True Width: 1.494 m - From: 690.66 m - To: 693.15 m - Intercept Depth: 690.66 m #### Classification - Program: exploration - Sample Type: drill - Group ID: 26-2654-04:690.66-693.15 #### QA/QC - Laboratory: ALS Laboratories - QA/QC Disclosed: Yes - Lab Certified: Yes - QP Signed: Yes - QA/QC Methods: standards, blanks #### Review - Needs Review: No - Interp. Status: scored - Historical: No #### Dates - Event date: 2026-10-14T00:00:00.000Z Reasoning: This high-grade copper intercept significantly enhances the polymetallic nature of the deeper mineralization, indicating a valuable zone. - Positive factor: High-grade copper over a good width for deeper mineralization - Positive factor: True width estimated at 60% of downhole length Evidence · table > 0.32 Context: 2.49 #### Tags used in scoring **True Width Disclosed** Polarity: positive Definition: Actual thickness perpendicular to structure is stated, not just downhole length. Why it applies: true\_width\_m is 1.494 **QA/QC Disclosed** Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Why it applies: qaqc\_disclosed is true **Cut-off Undisclosed** Polarity: negative Definition: High-grade interval reported without stating the cut-off grade used for compositing. Why it applies: no cutoff\_grade was stated **Nearology Play** Polarity: neutral Definition: Value premise rests on proximity to a known deposit rather than own results. Why it applies: proximity is offered as the value premise: "- 1.4m of 9 g/t Ag, \*\*0.49% Cu\*\* - Four rigs continue to drill at Ballywire, with a fifth rig drilling at the Company's" ### 26-2654-04 [Link to this fact](https://atlas-staging.minestarters.com/news/group-eleven-intersects-24m-of-mineralization-including-6-3m-of-7-9-zn-pb-and-14--40fd1b68-bb38-4bb8-9303-861389f4e9e5#fact-drill-facts-42) Ballywire · antimony #### Identity - Hole ID: 26-2654-04 - Project: Ballywire - Commodity: antimony - Region: ireland - Reported Region: ireland - Ticker: ZNG.V #### Geometry - Grade: 0.06 - Grade Unit: % - Intercept: 2.49 m - True Width: 1.494 m - From: 690.66 m - To: 693.15 m - Intercept Depth: 690.66 m #### Classification - Program: exploration - Sample Type: drill - Group ID: 26-2654-04:690.66-693.15 #### QA/QC - Laboratory: ALS Laboratories - QA/QC Disclosed: Yes - Lab Certified: Yes - QP Signed: Yes - QA/QC Methods: standards, blanks #### Review - Needs Review: No - Interp. Status: scored - Historical: No #### Dates - Event date: 2026-10-14T00:00:00.000Z Reasoning: The presence of antimony, even at a low grade, contributes to the polymetallic nature of this higher-grade deeper mineralization. - Positive factor: Presence of antimony, indicating polymetallic mineralization - Positive factor: True width estimated at 60% of downhole length - Negative factor: Low antimony grade Evidence · table > 0.06 Context: 2.49 #### Tags used in scoring **True Width Disclosed** Polarity: positive Definition: Actual thickness perpendicular to structure is stated, not just downhole length. Why it applies: true\_width\_m is 1.494 **QA/QC Disclosed** Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Why it applies: qaqc\_disclosed is true **Cut-off Undisclosed** Polarity: negative Definition: High-grade interval reported without stating the cut-off grade used for compositing. Why it applies: no cutoff\_grade was stated **Nearology Play** Polarity: neutral Definition: Value premise rests on proximity to a known deposit rather than own results. Why it applies: proximity is offered as the value premise: "- 1.4m of 9 g/t Ag, \*\*0.49% Cu\*\* - Four rigs continue to drill at Ballywire, with a fifth rig drilling at the Company's" ### 26-2654-04 [Link to this fact](https://atlas-staging.minestarters.com/news/group-eleven-intersects-24m-of-mineralization-including-6-3m-of-7-9-zn-pb-and-14--40fd1b68-bb38-4bb8-9303-861389f4e9e5#fact-drill-facts-43) Ballywire · zinc #### Identity - Hole ID: 26-2654-04 - Project: Ballywire - Commodity: zinc - Region: ireland - Reported Region: ireland - Ticker: ZNG.V #### Geometry - Grade: 0.02 - Grade Unit: % - Intercept: 1.18 m - True Width: 0.708 m - From: 690.66 m - To: 691.84 m - Intercept Depth: 690.66 m #### Classification - Program: exploration - Sample Type: drill - Group ID: 26-2654-04:690.66-691.84 #### QA/QC - Laboratory: ALS Laboratories - QA/QC Disclosed: Yes - Lab Certified: Yes - QP Signed: Yes - QA/QC Methods: standards, blanks #### Review - Needs Review: No - Interp. Status: scored - Historical: No #### Dates - Event date: 2026-10-14T00:00:00.000Z Reasoning: While the zinc grade is very low, this very narrow intercept shows the highest-grade copper-silver zone within the deeper mineralization. - Positive factor: True width estimated at 60% of downhole length - Negative factor: Very low zinc grade - Negative factor: Narrow intercept Evidence · table > 0.02 Context: 1.18 #### Tags used in scoring **True Width Disclosed** Polarity: positive Definition: Actual thickness perpendicular to structure is stated, not just downhole length. Why it applies: true\_width\_m is 0.708 **QA/QC Disclosed** Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Why it applies: qaqc\_disclosed is true **Cut-off Undisclosed** Polarity: negative Definition: High-grade interval reported without stating the cut-off grade used for compositing. Why it applies: no cutoff\_grade was stated **Nearology Play** Polarity: neutral Definition: Value premise rests on proximity to a known deposit rather than own results. Why it applies: proximity is offered as the value premise: "- 1.4m of 9 g/t Ag, \*\*0.49% Cu\*\* - Four rigs continue to drill at Ballywire, with a fifth rig drilling at the Company's" ### 26-2654-04 [Link to this fact](https://atlas-staging.minestarters.com/news/group-eleven-intersects-24m-of-mineralization-including-6-3m-of-7-9-zn-pb-and-14--40fd1b68-bb38-4bb8-9303-861389f4e9e5#fact-drill-facts-44) Ballywire · silver #### Identity - Hole ID: 26-2654-04 - Project: Ballywire - Commodity: silver - Region: ireland - Reported Region: ireland - Ticker: ZNG.V #### Geometry - Grade: 11.8 - Grade Unit: g/t - Intercept: 1.18 m - True Width: 0.708 m - From: 690.66 m - To: 691.84 m - Intercept Depth: 690.66 m #### Classification - Program: exploration - Sample Type: drill - Group ID: 26-2654-04:690.66-691.84 #### QA/QC - Laboratory: ALS Laboratories - QA/QC Disclosed: Yes - Lab Certified: Yes - QP Signed: Yes - QA/QC Methods: standards, blanks #### Review - Needs Review: No - Interp. Status: scored - Historical: No #### Dates - Event date: 2026-10-14T00:00:00.000Z Reasoning: This good silver grade over a narrow but significant width further enhances the polymetallic nature of the deeper mineralization, indicating a valuable, concentrated zone. - Positive factor: Good silver grade over a narrow but significant interval for deeper mineralization - Positive factor: True width estimated at 60% of downhole length Evidence · table > 11.8 Context: 1.18 #### Tags used in scoring **True Width Disclosed** Polarity: positive Definition: Actual thickness perpendicular to structure is stated, not just downhole length. Why it applies: true\_width\_m is 0.708 **QA/QC Disclosed** Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Why it applies: qaqc\_disclosed is true **Cut-off Undisclosed** Polarity: negative Definition: High-grade interval reported without stating the cut-off grade used for compositing. Why it applies: no cutoff\_grade was stated **Nearology Play** Polarity: neutral Definition: Value premise rests on proximity to a known deposit rather than own results. Why it applies: proximity is offered as the value premise: "- 1.4m of 9 g/t Ag, \*\*0.49% Cu\*\* - Four rigs continue to drill at Ballywire, with a fifth rig drilling at the Company's" ### 26-2654-04 [Link to this fact](https://atlas-staging.minestarters.com/news/group-eleven-intersects-24m-of-mineralization-including-6-3m-of-7-9-zn-pb-and-14--40fd1b68-bb38-4bb8-9303-861389f4e9e5#fact-drill-facts-45) Ballywire · copper #### Identity - Hole ID: 26-2654-04 - Project: Ballywire - Commodity: copper - Region: ireland - Reported Region: ireland - Ticker: ZNG.V #### Geometry - Grade: 0.37 - Grade Unit: % - Intercept: 1.18 m - True Width: 0.708 m - From: 690.66 m - To: 691.84 m - Intercept Depth: 690.66 m #### Classification - Program: exploration - Sample Type: drill - Group ID: 26-2654-04:690.66-691.84 #### QA/QC - Laboratory: ALS Laboratories - QA/QC Disclosed: Yes - Lab Certified: Yes - QP Signed: Yes - QA/QC Methods: standards, blanks #### Review - Needs Review: No - Interp. Status: scored - Historical: No #### Dates - Event date: 2026-10-14T00:00:00.000Z Reasoning: This high-grade copper intercept further enhances the polymetallic nature of the deeper mineralization, indicating a valuable, concentrated zone. - Positive factor: High-grade copper over a narrow but significant interval for deeper mineralization - Positive factor: True width estimated at 60% of downhole length Evidence · table > 0.37 Context: 1.18 #### Tags used in scoring **True Width Disclosed** Polarity: positive Definition: Actual thickness perpendicular to structure is stated, not just downhole length. Why it applies: true\_width\_m is 0.708 **QA/QC Disclosed** Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Why it applies: qaqc\_disclosed is true **Cut-off Undisclosed** Polarity: negative Definition: High-grade interval reported without stating the cut-off grade used for compositing. Why it applies: no cutoff\_grade was stated **Nearology Play** Polarity: neutral Definition: Value premise rests on proximity to a known deposit rather than own results. Why it applies: proximity is offered as the value premise: "- 1.4m of 9 g/t Ag, \*\*0.49% Cu\*\* - Four rigs continue to drill at Ballywire, with a fifth rig drilling at the Company's" ### 26-2654-04 [Link to this fact](https://atlas-staging.minestarters.com/news/group-eleven-intersects-24m-of-mineralization-including-6-3m-of-7-9-zn-pb-and-14--40fd1b68-bb38-4bb8-9303-861389f4e9e5#fact-drill-facts-46) Ballywire · antimony #### Identity - Hole ID: 26-2654-04 - Project: Ballywire - Commodity: antimony - Region: ireland - Reported Region: ireland - Ticker: ZNG.V #### Geometry - Grade: 0.06 - Grade Unit: % - Intercept: 1.18 m - True Width: 0.708 m - From: 690.66 m - To: 691.84 m - Intercept Depth: 690.66 m #### Classification - Program: exploration - Sample Type: drill - Group ID: 26-2654-04:690.66-691.84 #### QA/QC - Laboratory: ALS Laboratories - QA/QC Disclosed: Yes - Lab Certified: Yes - QP Signed: Yes - QA/QC Methods: standards, blanks #### Review - Needs Review: No - Interp. Status: scored - Historical: No #### Dates - Event date: 2026-10-14T00:00:00.000Z Reasoning: The presence of antimony, even at a low grade, contributes to the polymetallic nature of this higher-grade deeper mineralization. - Positive factor: Presence of antimony, indicating polymetallic mineralization - Positive factor: True width estimated at 60% of downhole length - Negative factor: Low antimony grade Evidence · table > 0.06 Context: 1.18 #### Tags used in scoring **True Width Disclosed** Polarity: positive Definition: Actual thickness perpendicular to structure is stated, not just downhole length. Why it applies: true\_width\_m is 0.708 **QA/QC Disclosed** Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Why it applies: qaqc\_disclosed is true **Cut-off Undisclosed** Polarity: negative Definition: High-grade interval reported without stating the cut-off grade used for compositing. Why it applies: no cutoff\_grade was stated **Nearology Play** Polarity: neutral Definition: Value premise rests on proximity to a known deposit rather than own results. Why it applies: proximity is offered as the value premise: "- 1.4m of 9 g/t Ag, \*\*0.49% Cu\*\* - Four rigs continue to drill at Ballywire, with a fifth rig drilling at the Company's" ### 26-2654-04 [Link to this fact](https://atlas-staging.minestarters.com/news/group-eleven-intersects-24m-of-mineralization-including-6-3m-of-7-9-zn-pb-and-14--40fd1b68-bb38-4bb8-9303-861389f4e9e5#fact-drill-facts-47) Ballywire · zinc #### Identity - Hole ID: 26-2654-04 - Project: Ballywire - Commodity: zinc - Region: ireland - Reported Region: ireland - Ticker: ZNG.V #### Geometry - Grade: 0.01 - Grade Unit: % - Intercept: 0.5 m - True Width: 0.3 m - From: 725.54 m - To: 726.04 m - Intercept Depth: 725.54 m #### Classification - Program: exploration - Sample Type: drill - Group ID: 26-2654-04:725.54-726.04 #### QA/QC - Laboratory: ALS Laboratories - QA/QC Disclosed: Yes - Lab Certified: Yes - QP Signed: Yes - QA/QC Methods: standards, blanks #### Review - Needs Review: No - Interp. Status: scored - Historical: No #### Dates - Event date: 2026-10-14T00:00:00.000Z Reasoning: While the zinc grade is very low, this very narrow intercept indicates the presence of mineralization at even greater depth. - Positive factor: True width estimated at 60% of downhole length - Negative factor: Very low zinc grade - Negative factor: Very narrow intercept Evidence · table > 0.01 Context: 0.50 #### Tags used in scoring **True Width Disclosed** Polarity: positive Definition: Actual thickness perpendicular to structure is stated, not just downhole length. Why it applies: true\_width\_m is 0.3 **QA/QC Disclosed** Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Why it applies: qaqc\_disclosed is true **Cut-off Undisclosed** Polarity: negative Definition: High-grade interval reported without stating the cut-off grade used for compositing. Why it applies: no cutoff\_grade was stated **Nearology Play** Polarity: neutral Definition: Value premise rests on proximity to a known deposit rather than own results. Why it applies: proximity is offered as the value premise: "- 1.4m of 9 g/t Ag, \*\*0.49% Cu\*\* - Four rigs continue to drill at Ballywire, with a fifth rig drilling at the Company's" ### 26-2654-04 [Link to this fact](https://atlas-staging.minestarters.com/news/group-eleven-intersects-24m-of-mineralization-including-6-3m-of-7-9-zn-pb-and-14--40fd1b68-bb38-4bb8-9303-861389f4e9e5#fact-drill-facts-48) Ballywire · lead #### Identity - Hole ID: 26-2654-04 - Project: Ballywire - Commodity: lead - Region: ireland - Reported Region: ireland - Ticker: ZNG.V #### Geometry - Grade: 0.01 - Grade Unit: % - Intercept: 0.5 m - True Width: 0.3 m - From: 725.54 m - To: 726.04 m - Intercept Depth: 725.54 m #### Classification - Program: exploration - Sample Type: drill - Group ID: 26-2654-04:725.54-726.04 #### QA/QC - Laboratory: ALS Laboratories - QA/QC Disclosed: Yes - Lab Certified: Yes - QP Signed: Yes - QA/QC Methods: standards, blanks #### Review - Needs Review: No - Interp. Status: scored - Historical: No #### Dates - Event date: 2026-10-14T00:00:00.000Z Reasoning: While the lead grade is very low, this very narrow intercept indicates the presence of mineralization at even greater depth. - Positive factor: True width estimated at 60% of downhole length - Negative factor: Very low lead grade - Negative factor: Very narrow intercept Evidence · table > 0.01 Context: 0.50 #### Tags used in scoring **True Width Disclosed** Polarity: positive Definition: Actual thickness perpendicular to structure is stated, not just downhole length. Why it applies: true\_width\_m is 0.3 **QA/QC Disclosed** Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Why it applies: qaqc\_disclosed is true **Cut-off Undisclosed** Polarity: negative Definition: High-grade interval reported without stating the cut-off grade used for compositing. Why it applies: no cutoff\_grade was stated **Nearology Play** Polarity: neutral Definition: Value premise rests on proximity to a known deposit rather than own results. Why it applies: proximity is offered as the value premise: "- 1.4m of 9 g/t Ag, \*\*0.49% Cu\*\* - Four rigs continue to drill at Ballywire, with a fifth rig drilling at the Company's" ### 26-2654-04 [Link to this fact](https://atlas-staging.minestarters.com/news/group-eleven-intersects-24m-of-mineralization-including-6-3m-of-7-9-zn-pb-and-14--40fd1b68-bb38-4bb8-9303-861389f4e9e5#fact-drill-facts-49) Ballywire · silver #### Identity - Hole ID: 26-2654-04 - Project: Ballywire - Commodity: silver - Region: ireland - Reported Region: ireland - Ticker: ZNG.V #### Geometry - Grade: 9.5 - Grade Unit: g/t - Intercept: 0.5 m - True Width: 0.3 m - From: 725.54 m - To: 726.04 m - Intercept Depth: 725.54 m #### Classification - Program: exploration - Sample Type: drill - Group ID: 26-2654-04:725.54-726.04 #### QA/QC - Laboratory: ALS Laboratories - QA/QC Disclosed: Yes - Lab Certified: Yes - QP Signed: Yes - QA/QC Methods: standards, blanks #### Review - Needs Review: No - Interp. Status: scored - Historical: No #### Dates - Event date: 2026-10-14T00:00:00.000Z Reasoning: This moderate silver grade in a very deep, narrow intercept indicates the persistence of mineralization to significant depths. - Positive factor: Moderate silver grade in a very deep intercept - Positive factor: True width estimated at 60% of downhole length - Negative factor: Very narrow intercept Evidence · table > 9.5 Context: 0.50 #### Tags used in scoring **True Width Disclosed** Polarity: positive Definition: Actual thickness perpendicular to structure is stated, not just downhole length. Why it applies: true\_width\_m is 0.3 **QA/QC Disclosed** Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Why it applies: qaqc\_disclosed is true **Cut-off Undisclosed** Polarity: negative Definition: High-grade interval reported without stating the cut-off grade used for compositing. Why it applies: no cutoff\_grade was stated **Nearology Play** Polarity: neutral Definition: Value premise rests on proximity to a known deposit rather than own results. Why it applies: proximity is offered as the value premise: "- 1.4m of 9 g/t Ag, \*\*0.49% Cu\*\* - Four rigs continue to drill at Ballywire, with a fifth rig drilling at the Company's" ### 26-2654-04 [Link to this fact](https://atlas-staging.minestarters.com/news/group-eleven-intersects-24m-of-mineralization-including-6-3m-of-7-9-zn-pb-and-14--40fd1b68-bb38-4bb8-9303-861389f4e9e5#fact-drill-facts-50) Ballywire · copper #### Identity - Hole ID: 26-2654-04 - Project: Ballywire - Commodity: copper - Region: ireland - Reported Region: ireland - Ticker: ZNG.V #### Geometry - Grade: 0.21 - Grade Unit: % - Intercept: 0.5 m - True Width: 0.3 m - From: 725.54 m - To: 726.04 m - Intercept Depth: 725.54 m #### Classification - Program: exploration - Sample Type: drill - Group ID: 26-2654-04:725.54-726.04 #### QA/QC - Laboratory: ALS Laboratories - QA/QC Disclosed: Yes - Lab Certified: Yes - QP Signed: Yes - QA/QC Methods: standards, blanks #### Review - Needs Review: No - Interp. Status: scored - Historical: No #### Dates - Event date: 2026-10-14T00:00:00.000Z Reasoning: This good copper grade in a very deep, narrow intercept indicates the persistence of mineralization to significant depths. - Positive factor: Good copper grade in a very deep intercept - Positive factor: True width estimated at 60% of downhole length - Negative factor: Very narrow intercept Evidence · table > 0.21 Context: 0.50 #### Tags used in scoring **True Width Disclosed** Polarity: positive Definition: Actual thickness perpendicular to structure is stated, not just downhole length. Why it applies: true\_width\_m is 0.3 **QA/QC Disclosed** Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Why it applies: qaqc\_disclosed is true **Cut-off Undisclosed** Polarity: negative Definition: High-grade interval reported without stating the cut-off grade used for compositing. Why it applies: no cutoff\_grade was stated **Nearology Play** Polarity: neutral Definition: Value premise rests on proximity to a known deposit rather than own results. Why it applies: proximity is offered as the value premise: "- 1.4m of 9 g/t Ag, \*\*0.49% Cu\*\* - Four rigs continue to drill at Ballywire, with a fifth rig drilling at the Company's" ### 26-468-26 [Link to this fact](https://atlas-staging.minestarters.com/news/group-eleven-intersects-24m-of-mineralization-including-6-3m-of-7-9-zn-pb-and-14--40fd1b68-bb38-4bb8-9303-861389f4e9e5#fact-drill-facts-51) Ballywire · zinc #### Identity - Hole ID: 26-468-26 - Project: Ballywire - Commodity: zinc - Region: ireland - Reported Region: ireland - Ticker: ZNG.V #### Geometry - Grade: 9.05 - Grade Unit: % - Intercept: 0.27 m - True Width: 0.243 m - From: 197.31 m - To: 197.58 m - Intercept Depth: 197.31 m #### Classification - Program: mixed - Sample Type: drill - Group ID: 26-468-26:197.31-197.58 #### QA/QC - Laboratory: ALS Laboratories - QA/QC Disclosed: Yes - Lab Certified: Yes - QP Signed: Yes - QA/QC Methods: standards, blanks #### Review - Needs Review: No - Interp. Status: scored - Historical: No #### Dates - Event date: 2026-10-14T00:00:00.000Z Reasoning: This high-grade zinc intercept, though very narrow, indicates the presence of strong mineralization within the gap-filling hole. - Positive factor: High-grade zinc intercept - Positive factor: True width estimated at 90% of downhole length - Negative factor: Very narrow intercept Evidence · table > 9.05 Context: 0.27 #### Tags used in scoring **True Width Disclosed** Polarity: positive Definition: Actual thickness perpendicular to structure is stated, not just downhole length. Why it applies: true\_width\_m is 0.243 **QA/QC Disclosed** Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Why it applies: qaqc\_disclosed is true **Cut-off Undisclosed** Polarity: negative Definition: High-grade interval reported without stating the cut-off grade used for compositing. Why it applies: no cutoff\_grade was stated **Infill Drilling** Polarity: neutral Definition: Confirmatory drilling to raise resource confidence, not new discovery. Why it applies: drill\_program\_type is "mixed" **Nearology Play** Polarity: neutral Definition: Value premise rests on proximity to a known deposit rather than own results. Why it applies: proximity is offered as the value premise: "- 1.4m of 9 g/t Ag, \*\*0.49% Cu\*\* - Four rigs continue to drill at Ballywire, with a fifth rig drilling at the Company's" ### 26-468-26 [Link to this fact](https://atlas-staging.minestarters.com/news/group-eleven-intersects-24m-of-mineralization-including-6-3m-of-7-9-zn-pb-and-14--40fd1b68-bb38-4bb8-9303-861389f4e9e5#fact-drill-facts-52) Ballywire · lead #### Identity - Hole ID: 26-468-26 - Project: Ballywire - Commodity: lead - Region: ireland - Reported Region: ireland - Ticker: ZNG.V #### Geometry - Grade: 0.02 - Grade Unit: % - Intercept: 0.27 m - True Width: 0.243 m - From: 197.31 m - To: 197.58 m - Intercept Depth: 197.31 m #### Classification - Program: mixed - Sample Type: drill - Group ID: 26-468-26:197.31-197.58 #### QA/QC - Laboratory: ALS Laboratories - QA/QC Disclosed: Yes - Lab Certified: Yes - QP Signed: Yes - QA/QC Methods: standards, blanks #### Review - Needs Review: No - Interp. Status: scored - Historical: No #### Dates - Event date: 2026-10-14T00:00:00.000Z Reasoning: While the lead grade is very low, its presence is noted in this high-grade zinc intercept. - Positive factor: True width estimated at 90% of downhole length - Negative factor: Very low lead grade - Negative factor: Very narrow intercept Evidence · table > 0.02 Context: 0.27 #### Tags used in scoring **True Width Disclosed** Polarity: positive Definition: Actual thickness perpendicular to structure is stated, not just downhole length. Why it applies: true\_width\_m is 0.243 **QA/QC Disclosed** Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Why it applies: qaqc\_disclosed is true **Cut-off Undisclosed** Polarity: negative Definition: High-grade interval reported without stating the cut-off grade used for compositing. Why it applies: no cutoff\_grade was stated **Infill Drilling** Polarity: neutral Definition: Confirmatory drilling to raise resource confidence, not new discovery. Why it applies: drill\_program\_type is "mixed" **Nearology Play** Polarity: neutral Definition: Value premise rests on proximity to a known deposit rather than own results. Why it applies: proximity is offered as the value premise: "- 1.4m of 9 g/t Ag, \*\*0.49% Cu\*\* - Four rigs continue to drill at Ballywire, with a fifth rig drilling at the Company's" ### 26-468-26 [Link to this fact](https://atlas-staging.minestarters.com/news/group-eleven-intersects-24m-of-mineralization-including-6-3m-of-7-9-zn-pb-and-14--40fd1b68-bb38-4bb8-9303-861389f4e9e5#fact-drill-facts-53) Ballywire · silver #### Identity - Hole ID: 26-468-26 - Project: Ballywire - Commodity: silver - Region: ireland - Reported Region: ireland - Ticker: ZNG.V #### Geometry - Grade: 3.4 - Grade Unit: g/t - Intercept: 0.27 m - True Width: 0.243 m - From: 197.31 m - To: 197.58 m - Intercept Depth: 197.31 m #### Classification - Program: mixed - Sample Type: drill - Group ID: 26-468-26:197.31-197.58 #### QA/QC - Laboratory: ALS Laboratories - QA/QC Disclosed: Yes - Lab Certified: Yes - QP Signed: Yes - QA/QC Methods: standards, blanks #### Review - Needs Review: No - Interp. Status: scored - Historical: No #### Dates - Event date: 2026-10-14T00:00:00.000Z Reasoning: While the silver grade is low, its presence is noted in this high-grade zinc intercept. - Positive factor: True width estimated at 90% of downhole length - Negative factor: Low silver grade - Negative factor: Very narrow intercept Evidence · table > 3.4 Context: 0.27 #### Tags used in scoring **True Width Disclosed** Polarity: positive Definition: Actual thickness perpendicular to structure is stated, not just downhole length. Why it applies: true\_width\_m is 0.243 **QA/QC Disclosed** Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Why it applies: qaqc\_disclosed is true **Cut-off Undisclosed** Polarity: negative Definition: High-grade interval reported without stating the cut-off grade used for compositing. Why it applies: no cutoff\_grade was stated **Infill Drilling** Polarity: neutral Definition: Confirmatory drilling to raise resource confidence, not new discovery. Why it applies: drill\_program\_type is "mixed" **Nearology Play** Polarity: neutral Definition: Value premise rests on proximity to a known deposit rather than own results. Why it applies: proximity is offered as the value premise: "- 1.4m of 9 g/t Ag, \*\*0.49% Cu\*\* - Four rigs continue to drill at Ballywire, with a fifth rig drilling at the Company's" ### 26-468-26 [Link to this fact](https://atlas-staging.minestarters.com/news/group-eleven-intersects-24m-of-mineralization-including-6-3m-of-7-9-zn-pb-and-14--40fd1b68-bb38-4bb8-9303-861389f4e9e5#fact-drill-facts-54) Ballywire · copper #### Identity - Hole ID: 26-468-26 - Project: Ballywire - Commodity: copper - Region: ireland - Reported Region: ireland - Ticker: ZNG.V #### Geometry - Grade: 0.01 - Grade Unit: % - Intercept: 0.27 m - True Width: 0.243 m - From: 197.31 m - To: 197.58 m - Intercept Depth: 197.31 m #### Classification - Program: mixed - Sample Type: drill - Group ID: 26-468-26:197.31-197.58 #### QA/QC - Laboratory: ALS Laboratories - QA/QC Disclosed: Yes - Lab Certified: Yes - QP Signed: Yes - QA/QC Methods: standards, blanks #### Review - Needs Review: No - Interp. Status: scored - Historical: No #### Dates - Event date: 2026-10-14T00:00:00.000Z Reasoning: While the copper grade is very low, its presence is noted in this high-grade zinc intercept. - Positive factor: True width estimated at 90% of downhole length - Negative factor: Very low copper grade - Negative factor: Very narrow intercept Evidence · table > 0.01 Context: 0.27 #### Tags used in scoring **True Width Disclosed** Polarity: positive Definition: Actual thickness perpendicular to structure is stated, not just downhole length. Why it applies: true\_width\_m is 0.243 **QA/QC Disclosed** Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Why it applies: qaqc\_disclosed is true **Cut-off Undisclosed** Polarity: negative Definition: High-grade interval reported without stating the cut-off grade used for compositing. Why it applies: no cutoff\_grade was stated **Infill Drilling** Polarity: neutral Definition: Confirmatory drilling to raise resource confidence, not new discovery. Why it applies: drill\_program\_type is "mixed" **Nearology Play** Polarity: neutral Definition: Value premise rests on proximity to a known deposit rather than own results. Why it applies: proximity is offered as the value premise: "- 1.4m of 9 g/t Ag, \*\*0.49% Cu\*\* - Four rigs continue to drill at Ballywire, with a fifth rig drilling at the Company's" ### 26-468-26 [Link to this fact](https://atlas-staging.minestarters.com/news/group-eleven-intersects-24m-of-mineralization-including-6-3m-of-7-9-zn-pb-and-14--40fd1b68-bb38-4bb8-9303-861389f4e9e5#fact-drill-facts-55) Ballywire · zinc #### Identity - Hole ID: 26-468-26 - Project: Ballywire - Commodity: zinc - Region: ireland - Reported Region: ireland - Ticker: ZNG.V #### Geometry - Grade: 2.11 - Grade Unit: % - Intercept: 31.1 m - True Width: 27.99 m - From: 360.6 m - To: 391.7 m - Intercept Depth: 360.6 m #### Classification - Program: mixed - Sample Type: drill - Group ID: 26-468-26:360.6-391.7 #### QA/QC - Laboratory: ALS Laboratories - QA/QC Disclosed: Yes - Lab Certified: Yes - QP Signed: Yes - QA/QC Methods: standards, blanks #### Review - Needs Review: No - Interp. Status: scored - Historical: No #### Dates - Event date: 2026-10-14T00:00:00.000Z Reasoning: This broad intercept in a gap-filling hole confirms significant mineralization continuity, with a good zinc grade and confirmed true width. - Positive factor: Significant intercept length in a gap-filling hole - Positive factor: Good zinc grade for a broad intercept - Positive factor: True width estimated at 90% of downhole length Evidence · table > 2.11 Context: 31.10 #### Tags used in scoring **True Width Disclosed** Polarity: positive Definition: Actual thickness perpendicular to structure is stated, not just downhole length. Why it applies: true\_width\_m is 27.99 **QA/QC Disclosed** Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Why it applies: qaqc\_disclosed is true **Cut-off Undisclosed** Polarity: negative Definition: High-grade interval reported without stating the cut-off grade used for compositing. Why it applies: no cutoff\_grade was stated **Infill Drilling** Polarity: neutral Definition: Confirmatory drilling to raise resource confidence, not new discovery. Why it applies: drill\_program\_type is "mixed" **Nearology Play** Polarity: neutral Definition: Value premise rests on proximity to a known deposit rather than own results. Why it applies: proximity is offered as the value premise: "- 1.4m of 9 g/t Ag, \*\*0.49% Cu\*\* - Four rigs continue to drill at Ballywire, with a fifth rig drilling at the Company's" ### 26-468-26 [Link to this fact](https://atlas-staging.minestarters.com/news/group-eleven-intersects-24m-of-mineralization-including-6-3m-of-7-9-zn-pb-and-14--40fd1b68-bb38-4bb8-9303-861389f4e9e5#fact-drill-facts-56) Ballywire · lead #### Identity - Hole ID: 26-468-26 - Project: Ballywire - Commodity: lead - Region: ireland - Reported Region: ireland - Ticker: ZNG.V #### Geometry - Grade: 1.62 - Grade Unit: % - Intercept: 31.1 m - True Width: 27.99 m - From: 360.6 m - To: 391.7 m - Intercept Depth: 360.6 m #### Classification - Program: mixed - Sample Type: drill - Group ID: 26-468-26:360.6-391.7 #### QA/QC - Laboratory: ALS Laboratories - QA/QC Disclosed: Yes - Lab Certified: Yes - QP Signed: Yes - QA/QC Methods: standards, blanks #### Review - Needs Review: No - Interp. Status: scored - Historical: No #### Dates - Event date: 2026-10-14T00:00:00.000Z Reasoning: The good lead grade significantly contributes to the polymetallic nature of this broad intercept, confirming strong mineralization continuity. - Positive factor: Significant intercept length in a gap-filling hole - Positive factor: Good lead grade contributing to overall Zn+Pb mineralization - Positive factor: True width estimated at 90% of downhole length Evidence · table > 1.62 Context: 31.10 #### Tags used in scoring **True Width Disclosed** Polarity: positive Definition: Actual thickness perpendicular to structure is stated, not just downhole length. Why it applies: true\_width\_m is 27.99 **QA/QC Disclosed** Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Why it applies: qaqc\_disclosed is true **Cut-off Undisclosed** Polarity: negative Definition: High-grade interval reported without stating the cut-off grade used for compositing. Why it applies: no cutoff\_grade was stated **Infill Drilling** Polarity: neutral Definition: Confirmatory drilling to raise resource confidence, not new discovery. Why it applies: drill\_program\_type is "mixed" **Nearology Play** Polarity: neutral Definition: Value premise rests on proximity to a known deposit rather than own results. Why it applies: proximity is offered as the value premise: "- 1.4m of 9 g/t Ag, \*\*0.49% Cu\*\* - Four rigs continue to drill at Ballywire, with a fifth rig drilling at the Company's" ### 26-468-26 [Link to this fact](https://atlas-staging.minestarters.com/news/group-eleven-intersects-24m-of-mineralization-including-6-3m-of-7-9-zn-pb-and-14--40fd1b68-bb38-4bb8-9303-861389f4e9e5#fact-drill-facts-57) Ballywire · silver #### Identity - Hole ID: 26-468-26 - Project: Ballywire - Commodity: silver - Region: ireland - Reported Region: ireland - Ticker: ZNG.V #### Geometry - Grade: 15.2 - Grade Unit: g/t - Intercept: 31.1 m - True Width: 27.99 m - From: 360.6 m - To: 391.7 m - Intercept Depth: 360.6 m #### Classification - Program: mixed - Sample Type: drill - Group ID: 26-468-26:360.6-391.7 #### QA/QC - Laboratory: ALS Laboratories - QA/QC Disclosed: Yes - Lab Certified: Yes - QP Signed: Yes - QA/QC Methods: standards, blanks #### Review - Needs Review: No - Interp. Status: scored - Historical: No #### Dates - Event date: 2026-10-14T00:00:00.000Z Reasoning: The moderate silver grade enhances the polymetallic nature of this broad intercept, confirming strong mineralization continuity. - Positive factor: Significant intercept length in a gap-filling hole - Positive factor: Moderate silver grade adding to polymetallic value - Positive factor: True width estimated at 90% of downhole length Evidence · table > 15.2 Context: 31.10 #### Tags used in scoring **True Width Disclosed** Polarity: positive Definition: Actual thickness perpendicular to structure is stated, not just downhole length. Why it applies: true\_width\_m is 27.99 **QA/QC Disclosed** Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Why it applies: qaqc\_disclosed is true **Cut-off Undisclosed** Polarity: negative Definition: High-grade interval reported without stating the cut-off grade used for compositing. Why it applies: no cutoff\_grade was stated **Infill Drilling** Polarity: neutral Definition: Confirmatory drilling to raise resource confidence, not new discovery. Why it applies: drill\_program\_type is "mixed" **Nearology Play** Polarity: neutral Definition: Value premise rests on proximity to a known deposit rather than own results. Why it applies: proximity is offered as the value premise: "- 1.4m of 9 g/t Ag, \*\*0.49% Cu\*\* - Four rigs continue to drill at Ballywire, with a fifth rig drilling at the Company's" ### 26-468-26 [Link to this fact](https://atlas-staging.minestarters.com/news/group-eleven-intersects-24m-of-mineralization-including-6-3m-of-7-9-zn-pb-and-14--40fd1b68-bb38-4bb8-9303-861389f4e9e5#fact-drill-facts-58) Ballywire · copper #### Identity - Hole ID: 26-468-26 - Project: Ballywire - Commodity: copper - Region: ireland - Reported Region: ireland - Ticker: ZNG.V #### Geometry - Grade: 0.04 - Grade Unit: % - Intercept: 31.1 m - True Width: 27.99 m - From: 360.6 m - To: 391.7 m - Intercept Depth: 360.6 m #### Classification - Program: mixed - Sample Type: drill - Group ID: 26-468-26:360.6-391.7 #### QA/QC - Laboratory: ALS Laboratories - QA/QC Disclosed: Yes - Lab Certified: Yes - QP Signed: Yes - QA/QC Methods: standards, blanks #### Review - Needs Review: No - Interp. Status: scored - Historical: No #### Dates - Event date: 2026-10-14T00:00:00.000Z Reasoning: The presence of copper, even at a low grade, contributes to the polymetallic nature of this broad intercept, confirming mineralization continuity. - Positive factor: Significant intercept length in a gap-filling hole - Positive factor: Presence of copper, indicating polymetallic mineralization - Positive factor: True width estimated at 90% of downhole length - Negative factor: Low copper grade Evidence · table > 0.04 Context: 31.10 #### Tags used in scoring **True Width Disclosed** Polarity: positive Definition: Actual thickness perpendicular to structure is stated, not just downhole length. Why it applies: true\_width\_m is 27.99 **QA/QC Disclosed** Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Why it applies: qaqc\_disclosed is true **Cut-off Undisclosed** Polarity: negative Definition: High-grade interval reported without stating the cut-off grade used for compositing. Why it applies: no cutoff\_grade was stated **Infill Drilling** Polarity: neutral Definition: Confirmatory drilling to raise resource confidence, not new discovery. Why it applies: drill\_program\_type is "mixed" **Nearology Play** Polarity: neutral Definition: Value premise rests on proximity to a known deposit rather than own results. Why it applies: proximity is offered as the value premise: "- 1.4m of 9 g/t Ag, \*\*0.49% Cu\*\* - Four rigs continue to drill at Ballywire, with a fifth rig drilling at the Company's" ### 26-468-26 [Link to this fact](https://atlas-staging.minestarters.com/news/group-eleven-intersects-24m-of-mineralization-including-6-3m-of-7-9-zn-pb-and-14--40fd1b68-bb38-4bb8-9303-861389f4e9e5#fact-drill-facts-59) Ballywire · zinc #### Identity - Hole ID: 26-468-26 - Project: Ballywire - Commodity: zinc - Region: ireland - Reported Region: ireland - Ticker: ZNG.V #### Geometry - Grade: 4.62 - Grade Unit: % - Intercept: 11.1 m - True Width: 9.99 m - From: 361.5 m - To: 372.6 m - Intercept Depth: 360.6 m #### Classification - Program: mixed - Sample Type: drill - Group ID: 26-468-26:361.5-372.6 #### QA/QC - Laboratory: ALS Laboratories - QA/QC Disclosed: Yes - Lab Certified: Yes - QP Signed: Yes - QA/QC Methods: standards, blanks #### Review - Needs Review: No - Interp. Status: scored - Historical: No #### Dates - Event date: 2026-10-14T00:00:00.000Z Reasoning: This high-grade zinc intercept within a broader mineralized zone confirms strong continuity of high-grade mineralization in the gap area. - Positive factor: High-grade zinc intercept within a significant gap-filling hole - Positive factor: Good width for high-grade mineralization - Positive factor: True width estimated at 90% of downhole length Evidence · table > 4.62 Context: 11.10 #### Tags used in scoring **True Width Disclosed** Polarity: positive Definition: Actual thickness perpendicular to structure is stated, not just downhole length. Why it applies: true\_width\_m is 9.99 **QA/QC Disclosed** Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Why it applies: qaqc\_disclosed is true **Cut-off Undisclosed** Polarity: negative Definition: High-grade interval reported without stating the cut-off grade used for compositing. Why it applies: no cutoff\_grade was stated **Infill Drilling** Polarity: neutral Definition: Confirmatory drilling to raise resource confidence, not new discovery. Why it applies: drill\_program\_type is "mixed" **Nearology Play** Polarity: neutral Definition: Value premise rests on proximity to a known deposit rather than own results. Why it applies: proximity is offered as the value premise: "- 1.4m of 9 g/t Ag, \*\*0.49% Cu\*\* - Four rigs continue to drill at Ballywire, with a fifth rig drilling at the Company's" ### 26-468-26 [Link to this fact](https://atlas-staging.minestarters.com/news/group-eleven-intersects-24m-of-mineralization-including-6-3m-of-7-9-zn-pb-and-14--40fd1b68-bb38-4bb8-9303-861389f4e9e5#fact-drill-facts-60) Ballywire · lead #### Identity - Hole ID: 26-468-26 - Project: Ballywire - Commodity: lead - Region: ireland - Reported Region: ireland - Ticker: ZNG.V #### Geometry - Grade: 3.14 - Grade Unit: % - Intercept: 11.1 m - True Width: 9.99 m - From: 361.5 m - To: 372.6 m - Intercept Depth: 360.6 m #### Classification - Program: mixed - Sample Type: drill - Group ID: 26-468-26:361.5-372.6 #### QA/QC - Laboratory: ALS Laboratories - QA/QC Disclosed: Yes - Lab Certified: Yes - QP Signed: Yes - QA/QC Methods: standards, blanks #### Review - Needs Review: No - Interp. Status: scored - Historical: No #### Dates - Event date: 2026-10-14T00:00:00.000Z Reasoning: The high lead grade significantly contributes to the high-grade polymetallic nature of this intercept, reinforcing the quality of mineralization in the gap area. - Positive factor: High-grade lead contributing to high-grade Zn+Pb mineralization - Positive factor: Good width for high-grade mineralization - Positive factor: True width estimated at 90% of downhole length Evidence · table > 3.14 Context: 11.10 #### Tags used in scoring **True Width Disclosed** Polarity: positive Definition: Actual thickness perpendicular to structure is stated, not just downhole length. Why it applies: true\_width\_m is 9.99 **QA/QC Disclosed** Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Why it applies: qaqc\_disclosed is true **Cut-off Undisclosed** Polarity: negative Definition: High-grade interval reported without stating the cut-off grade used for compositing. Why it applies: no cutoff\_grade was stated **Infill Drilling** Polarity: neutral Definition: Confirmatory drilling to raise resource confidence, not new discovery. Why it applies: drill\_program\_type is "mixed" **Nearology Play** Polarity: neutral Definition: Value premise rests on proximity to a known deposit rather than own results. Why it applies: proximity is offered as the value premise: "- 1.4m of 9 g/t Ag, \*\*0.49% Cu\*\* - Four rigs continue to drill at Ballywire, with a fifth rig drilling at the Company's" ### 26-468-26 [Link to this fact](https://atlas-staging.minestarters.com/news/group-eleven-intersects-24m-of-mineralization-including-6-3m-of-7-9-zn-pb-and-14--40fd1b68-bb38-4bb8-9303-861389f4e9e5#fact-drill-facts-61) Ballywire · silver #### Identity - Hole ID: 26-468-26 - Project: Ballywire - Commodity: silver - Region: ireland - Reported Region: ireland - Ticker: ZNG.V #### Geometry - Grade: 32.3 - Grade Unit: g/t - Intercept: 11.1 m - True Width: 9.99 m - From: 361.5 m - To: 372.6 m - Intercept Depth: 360.6 m #### Classification - Program: mixed - Sample Type: drill - Group ID: 26-468-26:361.5-372.6 #### QA/QC - Laboratory: ALS Laboratories - QA/QC Disclosed: Yes - Lab Certified: Yes - QP Signed: Yes - QA/QC Methods: standards, blanks #### Review - Needs Review: No - Interp. Status: scored - Historical: No #### Dates - Event date: 2026-10-14T00:00:00.000Z Reasoning: The good silver grade enhances the polymetallic nature of this high-grade intercept, contributing to the overall value of the mineralization in the gap area. - Positive factor: Good silver grade adding to polymetallic value - Positive factor: Good width for mineralization - Positive factor: True width estimated at 90% of downhole length Evidence · table > 32.3 Context: 11.10 #### Tags used in scoring **True Width Disclosed** Polarity: positive Definition: Actual thickness perpendicular to structure is stated, not just downhole length. Why it applies: true\_width\_m is 9.99 **QA/QC Disclosed** Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Why it applies: qaqc\_disclosed is true **Cut-off Undisclosed** Polarity: negative Definition: High-grade interval reported without stating the cut-off grade used for compositing. Why it applies: no cutoff\_grade was stated **Infill Drilling** Polarity: neutral Definition: Confirmatory drilling to raise resource confidence, not new discovery. Why it applies: drill\_program\_type is "mixed" **Nearology Play** Polarity: neutral Definition: Value premise rests on proximity to a known deposit rather than own results. Why it applies: proximity is offered as the value premise: "- 1.4m of 9 g/t Ag, \*\*0.49% Cu\*\* - Four rigs continue to drill at Ballywire, with a fifth rig drilling at the Company's" ### 26-468-26 [Link to this fact](https://atlas-staging.minestarters.com/news/group-eleven-intersects-24m-of-mineralization-including-6-3m-of-7-9-zn-pb-and-14--40fd1b68-bb38-4bb8-9303-861389f4e9e5#fact-drill-facts-62) Ballywire · copper #### Identity - Hole ID: 26-468-26 - Project: Ballywire - Commodity: copper - Region: ireland - Reported Region: ireland - Ticker: ZNG.V #### Geometry - Grade: 0.01 - Grade Unit: % - Intercept: 11.1 m - True Width: 9.99 m - From: 361.5 m - To: 372.6 m - Intercept Depth: 360.6 m #### Classification - Program: mixed - Sample Type: drill - Group ID: 26-468-26:361.5-372.6 #### QA/QC - Laboratory: ALS Laboratories - QA/QC Disclosed: Yes - Lab Certified: Yes - QP Signed: Yes - QA/QC Methods: standards, blanks #### Review - Needs Review: No - Interp. Status: scored - Historical: No #### Dates - Event date: 2026-10-14T00:00:00.000Z Reasoning: While the copper grade is very low, its presence in this high-grade polymetallic intercept is noted as part of the overall mineral assemblage. - Positive factor: Presence of copper, indicating polymetallic mineralization - Positive factor: True width estimated at 90% of downhole length - Negative factor: Very low copper grade Evidence · table > 0.01 Context: 11.10 #### Tags used in scoring **True Width Disclosed** Polarity: positive Definition: Actual thickness perpendicular to structure is stated, not just downhole length. Why it applies: true\_width\_m is 9.99 **QA/QC Disclosed** Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Why it applies: qaqc\_disclosed is true **Cut-off Undisclosed** Polarity: negative Definition: High-grade interval reported without stating the cut-off grade used for compositing. Why it applies: no cutoff\_grade was stated **Infill Drilling** Polarity: neutral Definition: Confirmatory drilling to raise resource confidence, not new discovery. Why it applies: drill\_program\_type is "mixed" **Nearology Play** Polarity: neutral Definition: Value premise rests on proximity to a known deposit rather than own results. Why it applies: proximity is offered as the value premise: "- 1.4m of 9 g/t Ag, \*\*0.49% Cu\*\* - Four rigs continue to drill at Ballywire, with a fifth rig drilling at the Company's" ### 26-468-26 [Link to this fact](https://atlas-staging.minestarters.com/news/group-eleven-intersects-24m-of-mineralization-including-6-3m-of-7-9-zn-pb-and-14--40fd1b68-bb38-4bb8-9303-861389f4e9e5#fact-drill-facts-63) Ballywire · zinc #### Identity - Hole ID: 26-468-26 - Project: Ballywire - Commodity: zinc - Region: ireland - Reported Region: ireland - Ticker: ZNG.V #### Geometry - Grade: 5.64 - Grade Unit: % - Intercept: 7.37 m - True Width: 6.633 m - From: 365.23 m - To: 372.6 m - Intercept Depth: 360.6 m #### Classification - Program: mixed - Sample Type: drill - Group ID: 26-468-26:365.23-372.6 #### QA/QC - Laboratory: ALS Laboratories - QA/QC Disclosed: Yes - Lab Certified: Yes - QP Signed: Yes - QA/QC Methods: standards, blanks #### Review - Needs Review: No - Interp. Status: scored - Historical: No #### Dates - Event date: 2026-10-14T00:00:00.000Z Reasoning: This very high-grade zinc intercept is a bonanza result, confirming excellent mineralization quality and continuity in the gap area. - Positive factor: Very high-grade zinc intercept within a significant gap-filling hole - Positive factor: Good width for bonanza-grade mineralization - Positive factor: True width estimated at 90% of downhole length Evidence · table > 5.64 Context: 7.37 #### Tags used in scoring **True Width Disclosed** Polarity: positive Definition: Actual thickness perpendicular to structure is stated, not just downhole length. Why it applies: true\_width\_m is 6.633 **QA/QC Disclosed** Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Why it applies: qaqc\_disclosed is true **Cut-off Undisclosed** Polarity: negative Definition: High-grade interval reported without stating the cut-off grade used for compositing. Why it applies: no cutoff\_grade was stated **Infill Drilling** Polarity: neutral Definition: Confirmatory drilling to raise resource confidence, not new discovery. Why it applies: drill\_program\_type is "mixed" **Nearology Play** Polarity: neutral Definition: Value premise rests on proximity to a known deposit rather than own results. Why it applies: proximity is offered as the value premise: "- 1.4m of 9 g/t Ag, \*\*0.49% Cu\*\* - Four rigs continue to drill at Ballywire, with a fifth rig drilling at the Company's" ### 26-468-26 [Link to this fact](https://atlas-staging.minestarters.com/news/group-eleven-intersects-24m-of-mineralization-including-6-3m-of-7-9-zn-pb-and-14--40fd1b68-bb38-4bb8-9303-861389f4e9e5#fact-drill-facts-64) Ballywire · lead #### Identity - Hole ID: 26-468-26 - Project: Ballywire - Commodity: lead - Region: ireland - Reported Region: ireland - Ticker: ZNG.V #### Geometry - Grade: 4.45 - Grade Unit: % - Intercept: 7.37 m - True Width: 6.633 m - From: 365.23 m - To: 372.6 m - Intercept Depth: 360.6 m #### Classification - Program: mixed - Sample Type: drill - Group ID: 26-468-26:365.23-372.6 #### QA/QC - Laboratory: ALS Laboratories - QA/QC Disclosed: Yes - Lab Certified: Yes - QP Signed: Yes - QA/QC Methods: standards, blanks #### Review - Needs Review: No - Interp. Status: scored - Historical: No #### Dates - Event date: 2026-10-14T00:00:00.000Z Reasoning: The very high lead grade significantly enhances the bonanza-grade polymetallic nature of this intercept, reinforcing the excellent quality of mineralization. - Positive factor: Very high-grade lead contributing to bonanza Zn+Pb mineralization - Positive factor: Good width for high-grade mineralization - Positive factor: True width estimated at 90% of downhole length Evidence · table > 4.45 Context: 7.37 #### Tags used in scoring **True Width Disclosed** Polarity: positive Definition: Actual thickness perpendicular to structure is stated, not just downhole length. Why it applies: true\_width\_m is 6.633 **QA/QC Disclosed** Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Why it applies: qaqc\_disclosed is true **Cut-off Undisclosed** Polarity: negative Definition: High-grade interval reported without stating the cut-off grade used for compositing. Why it applies: no cutoff\_grade was stated **Infill Drilling** Polarity: neutral Definition: Confirmatory drilling to raise resource confidence, not new discovery. Why it applies: drill\_program\_type is "mixed" **Nearology Play** Polarity: neutral Definition: Value premise rests on proximity to a known deposit rather than own results. Why it applies: proximity is offered as the value premise: "- 1.4m of 9 g/t Ag, \*\*0.49% Cu\*\* - Four rigs continue to drill at Ballywire, with a fifth rig drilling at the Company's" ### 26-468-26 [Link to this fact](https://atlas-staging.minestarters.com/news/group-eleven-intersects-24m-of-mineralization-including-6-3m-of-7-9-zn-pb-and-14--40fd1b68-bb38-4bb8-9303-861389f4e9e5#fact-drill-facts-65) Ballywire · silver #### Identity - Hole ID: 26-468-26 - Project: Ballywire - Commodity: silver - Region: ireland - Reported Region: ireland - Ticker: ZNG.V #### Geometry - Grade: 36.5 - Grade Unit: g/t - Intercept: 7.37 m - True Width: 6.633 m - From: 365.23 m - To: 372.6 m - Intercept Depth: 360.6 m #### Classification - Program: mixed - Sample Type: drill - Group ID: 26-468-26:365.23-372.6 #### QA/QC - Laboratory: ALS Laboratories - QA/QC Disclosed: Yes - Lab Certified: Yes - QP Signed: Yes - QA/QC Methods: standards, blanks #### Review - Needs Review: No - Interp. Status: scored - Historical: No #### Dates - Event date: 2026-10-14T00:00:00.000Z Reasoning: The good silver grade enhances the polymetallic nature of this bonanza-grade intercept, contributing to the overall value of the mineralization in the gap area. - Positive factor: Good silver grade adding to polymetallic value - Positive factor: Good width for mineralization - Positive factor: True width estimated at 90% of downhole length Evidence · table > 36.5 Context: 7.37 #### Tags used in scoring **True Width Disclosed** Polarity: positive Definition: Actual thickness perpendicular to structure is stated, not just downhole length. Why it applies: true\_width\_m is 6.633 **QA/QC Disclosed** Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Why it applies: qaqc\_disclosed is true **Cut-off Undisclosed** Polarity: negative Definition: High-grade interval reported without stating the cut-off grade used for compositing. Why it applies: no cutoff\_grade was stated **Infill Drilling** Polarity: neutral Definition: Confirmatory drilling to raise resource confidence, not new discovery. Why it applies: drill\_program\_type is "mixed" **Nearology Play** Polarity: neutral Definition: Value premise rests on proximity to a known deposit rather than own results. Why it applies: proximity is offered as the value premise: "- 1.4m of 9 g/t Ag, \*\*0.49% Cu\*\* - Four rigs continue to drill at Ballywire, with a fifth rig drilling at the Company's" ### 26-468-26 [Link to this fact](https://atlas-staging.minestarters.com/news/group-eleven-intersects-24m-of-mineralization-including-6-3m-of-7-9-zn-pb-and-14--40fd1b68-bb38-4bb8-9303-861389f4e9e5#fact-drill-facts-66) Ballywire · copper #### Identity - Hole ID: 26-468-26 - Project: Ballywire - Commodity: copper - Region: ireland - Reported Region: ireland - Ticker: ZNG.V #### Geometry - Grade: 0.02 - Grade Unit: % - Intercept: 7.37 m - True Width: 6.633 m - From: 365.23 m - To: 372.6 m - Intercept Depth: 360.6 m #### Classification - Program: mixed - Sample Type: drill - Group ID: 26-468-26:365.23-372.6 #### QA/QC - Laboratory: ALS Laboratories - QA/QC Disclosed: Yes - Lab Certified: Yes - QP Signed: Yes - QA/QC Methods: standards, blanks #### Review - Needs Review: No - Interp. Status: scored - Historical: No #### Dates - Event date: 2026-10-14T00:00:00.000Z Reasoning: While the copper grade is very low, its presence in this bonanza-grade polymetallic intercept is noted as part of the overall mineral assemblage. - Positive factor: Presence of copper, indicating polymetallic mineralization - Positive factor: True width estimated at 90% of downhole length - Negative factor: Very low copper grade Evidence · table > 0.02 Context: 7.37 #### Tags used in scoring **True Width Disclosed** Polarity: positive Definition: Actual thickness perpendicular to structure is stated, not just downhole length. Why it applies: true\_width\_m is 6.633 **QA/QC Disclosed** Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Why it applies: qaqc\_disclosed is true **Cut-off Undisclosed** Polarity: negative Definition: High-grade interval reported without stating the cut-off grade used for compositing. Why it applies: no cutoff\_grade was stated **Infill Drilling** Polarity: neutral Definition: Confirmatory drilling to raise resource confidence, not new discovery. Why it applies: drill\_program\_type is "mixed" **Nearology Play** Polarity: neutral Definition: Value premise rests on proximity to a known deposit rather than own results. Why it applies: proximity is offered as the value premise: "- 1.4m of 9 g/t Ag, \*\*0.49% Cu\*\* - Four rigs continue to drill at Ballywire, with a fifth rig drilling at the Company's" ### 26-468-26 [Link to this fact](https://atlas-staging.minestarters.com/news/group-eleven-intersects-24m-of-mineralization-including-6-3m-of-7-9-zn-pb-and-14--40fd1b68-bb38-4bb8-9303-861389f4e9e5#fact-drill-facts-67) Ballywire · zinc #### Identity - Hole ID: 26-468-26 - Project: Ballywire - Commodity: zinc - Region: ireland - Reported Region: ireland - Ticker: ZNG.V #### Geometry - Grade: 3.32 - Grade Unit: % - Intercept: 2.68 m - True Width: 2.412 m - From: 369.92 m - To: 372.6 m - Intercept Depth: 360.6 m #### Classification - Program: mixed - Sample Type: drill - Group ID: 26-468-26:369.92-372.6 #### QA/QC - Laboratory: ALS Laboratories - QA/QC Disclosed: Yes - Lab Certified: Yes - QP Signed: Yes - QA/QC Methods: standards, blanks #### Review - Needs Review: No - Interp. Status: scored - Historical: No #### Dates - Event date: 2026-10-14T00:00:00.000Z Reasoning: This high-grade zinc intercept within a high-grade zone further confirms the bonanza-grade potential and continuity of mineralization in the gap area. - Positive factor: High-grade zinc intercept within a significant gap-filling hole - Positive factor: Good width for high-grade mineralization - Positive factor: True width estimated at 90% of downhole length Evidence · table > 3.32 Context: 2.68 #### Tags used in scoring **True Width Disclosed** Polarity: positive Definition: Actual thickness perpendicular to structure is stated, not just downhole length. Why it applies: true\_width\_m is 2.412 **QA/QC Disclosed** Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Why it applies: qaqc\_disclosed is true **Cut-off Undisclosed** Polarity: negative Definition: High-grade interval reported without stating the cut-off grade used for compositing. Why it applies: no cutoff\_grade was stated **Infill Drilling** Polarity: neutral Definition: Confirmatory drilling to raise resource confidence, not new discovery. Why it applies: drill\_program\_type is "mixed" **Nearology Play** Polarity: neutral Definition: Value premise rests on proximity to a known deposit rather than own results. Why it applies: proximity is offered as the value premise: "- 1.4m of 9 g/t Ag, \*\*0.49% Cu\*\* - Four rigs continue to drill at Ballywire, with a fifth rig drilling at the Company's" ### 26-468-26 [Link to this fact](https://atlas-staging.minestarters.com/news/group-eleven-intersects-24m-of-mineralization-including-6-3m-of-7-9-zn-pb-and-14--40fd1b68-bb38-4bb8-9303-861389f4e9e5#fact-drill-facts-68) Ballywire · lead #### Identity - Hole ID: 26-468-26 - Project: Ballywire - Commodity: lead - Region: ireland - Reported Region: ireland - Ticker: ZNG.V #### Geometry - Grade: 8.71 - Grade Unit: % - Intercept: 2.68 m - True Width: 2.412 m - From: 369.92 m - To: 372.6 m - Intercept Depth: 360.6 m #### Classification - Program: mixed - Sample Type: drill - Group ID: 26-468-26:369.92-372.6 #### QA/QC - Laboratory: ALS Laboratories - QA/QC Disclosed: Yes - Lab Certified: Yes - QP Signed: Yes - QA/QC Methods: standards, blanks #### Review - Needs Review: No - Interp. Status: scored - Historical: No #### Dates - Event date: 2026-10-14T00:00:00.000Z Reasoning: The exceptional lead grade further enhances the bonanza-grade polymetallic nature of this intercept, indicating very high-quality mineralization. - Positive factor: Exceptional lead grade contributing to bonanza Zn+Pb mineralization - Positive factor: Good width for high-grade mineralization - Positive factor: True width estimated at 90% of downhole length Evidence · table > 8.71 Context: 2.68 #### Tags used in scoring **True Width Disclosed** Polarity: positive Definition: Actual thickness perpendicular to structure is stated, not just downhole length. Why it applies: true\_width\_m is 2.412 **QA/QC Disclosed** Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Why it applies: qaqc\_disclosed is true **Cut-off Undisclosed** Polarity: negative Definition: High-grade interval reported without stating the cut-off grade used for compositing. Why it applies: no cutoff\_grade was stated **Infill Drilling** Polarity: neutral Definition: Confirmatory drilling to raise resource confidence, not new discovery. Why it applies: drill\_program\_type is "mixed" **Nearology Play** Polarity: neutral Definition: Value premise rests on proximity to a known deposit rather than own results. Why it applies: proximity is offered as the value premise: "- 1.4m of 9 g/t Ag, \*\*0.49% Cu\*\* - Four rigs continue to drill at Ballywire, with a fifth rig drilling at the Company's" ### 26-468-26 [Link to this fact](https://atlas-staging.minestarters.com/news/group-eleven-intersects-24m-of-mineralization-including-6-3m-of-7-9-zn-pb-and-14--40fd1b68-bb38-4bb8-9303-861389f4e9e5#fact-drill-facts-69) Ballywire · silver #### Identity - Hole ID: 26-468-26 - Project: Ballywire - Commodity: silver - Region: ireland - Reported Region: ireland - Ticker: ZNG.V #### Geometry - Grade: 43.7 - Grade Unit: g/t - Intercept: 2.68 m - True Width: 2.412 m - From: 369.92 m - To: 372.6 m - Intercept Depth: 360.6 m #### Classification - Program: mixed - Sample Type: drill - Group ID: 26-468-26:369.92-372.6 #### QA/QC - Laboratory: ALS Laboratories - QA/QC Disclosed: Yes - Lab Certified: Yes - QP Signed: Yes - QA/QC Methods: standards, blanks #### Review - Needs Review: No - Interp. Status: scored - Historical: No #### Dates - Event date: 2026-10-14T00:00:00.000Z Reasoning: The good silver grade enhances the polymetallic nature of this exceptional intercept, contributing to the overall value of the mineralization in the gap area. - Positive factor: Good silver grade adding to polymetallic value - Positive factor: Good width for mineralization - Positive factor: True width estimated at 90% of downhole length Evidence · table > 43.7 Context: 2.68 #### Tags used in scoring **True Width Disclosed** Polarity: positive Definition: Actual thickness perpendicular to structure is stated, not just downhole length. Why it applies: true\_width\_m is 2.412 **QA/QC Disclosed** Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Why it applies: qaqc\_disclosed is true **Cut-off Undisclosed** Polarity: negative Definition: High-grade interval reported without stating the cut-off grade used for compositing. Why it applies: no cutoff\_grade was stated **Infill Drilling** Polarity: neutral Definition: Confirmatory drilling to raise resource confidence, not new discovery. Why it applies: drill\_program\_type is "mixed" **Nearology Play** Polarity: neutral Definition: Value premise rests on proximity to a known deposit rather than own results. Why it applies: proximity is offered as the value premise: "- 1.4m of 9 g/t Ag, \*\*0.49% Cu\*\* - Four rigs continue to drill at Ballywire, with a fifth rig drilling at the Company's" ### 26-468-26 [Link to this fact](https://atlas-staging.minestarters.com/news/group-eleven-intersects-24m-of-mineralization-including-6-3m-of-7-9-zn-pb-and-14--40fd1b68-bb38-4bb8-9303-861389f4e9e5#fact-drill-facts-70) Ballywire · copper #### Identity - Hole ID: 26-468-26 - Project: Ballywire - Commodity: copper - Region: ireland - Reported Region: ireland - Ticker: ZNG.V #### Geometry - Grade: 0.02 - Grade Unit: % - Intercept: 2.68 m - True Width: 2.412 m - From: 369.92 m - To: 372.6 m - Intercept Depth: 360.6 m #### Classification - Program: mixed - Sample Type: drill - Group ID: 26-468-26:369.92-372.6 #### QA/QC - Laboratory: ALS Laboratories - QA/QC Disclosed: Yes - Lab Certified: Yes - QP Signed: Yes - QA/QC Methods: standards, blanks #### Review - Needs Review: No - Interp. Status: scored - Historical: No #### Dates - Event date: 2026-10-14T00:00:00.000Z Reasoning: While the copper grade is very low, its presence in this exceptional polymetallic intercept is noted as part of the overall mineral assemblage. - Positive factor: Presence of copper, indicating polymetallic mineralization - Positive factor: True width estimated at 90% of downhole length - Negative factor: Very low copper grade Evidence · table > 0.02 Context: 2.68 #### Tags used in scoring **True Width Disclosed** Polarity: positive Definition: Actual thickness perpendicular to structure is stated, not just downhole length. Why it applies: true\_width\_m is 2.412 **QA/QC Disclosed** Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Why it applies: qaqc\_disclosed is true **Cut-off Undisclosed** Polarity: negative Definition: High-grade interval reported without stating the cut-off grade used for compositing. Why it applies: no cutoff\_grade was stated **Infill Drilling** Polarity: neutral Definition: Confirmatory drilling to raise resource confidence, not new discovery. Why it applies: drill\_program\_type is "mixed" **Nearology Play** Polarity: neutral Definition: Value premise rests on proximity to a known deposit rather than own results. Why it applies: proximity is offered as the value premise: "- 1.4m of 9 g/t Ag, \*\*0.49% Cu\*\* - Four rigs continue to drill at Ballywire, with a fifth rig drilling at the Company's" ### 26-468-26 [Link to this fact](https://atlas-staging.minestarters.com/news/group-eleven-intersects-24m-of-mineralization-including-6-3m-of-7-9-zn-pb-and-14--40fd1b68-bb38-4bb8-9303-861389f4e9e5#fact-drill-facts-71) Ballywire · antimony #### Identity - Hole ID: 26-468-26 - Project: Ballywire - Commodity: antimony - Region: ireland - Reported Region: ireland - Ticker: ZNG.V #### Geometry - Grade: 0.01 - Grade Unit: % - Intercept: 2.68 m - True Width: 2.412 m - From: 369.92 m - To: 372.6 m - Intercept Depth: 360.6 m #### Classification - Program: mixed - Sample Type: drill - Group ID: 26-468-26:369.92-372.6 #### QA/QC - Laboratory: ALS Laboratories - QA/QC Disclosed: Yes - Lab Certified: Yes - QP Signed: Yes - QA/QC Methods: standards, blanks #### Review - Needs Review: No - Interp. Status: scored - Historical: No #### Dates - Event date: 2026-10-14T00:00:00.000Z Reasoning: The presence of antimony, even at a low grade, contributes to the polymetallic nature of this exceptional intercept. - Positive factor: Presence of antimony, indicating polymetallic mineralization - Positive factor: True width estimated at 90% of downhole length - Negative factor: Low antimony grade Evidence · table > 0.01 Context: 2.68 #### Tags used in scoring **True Width Disclosed** Polarity: positive Definition: Actual thickness perpendicular to structure is stated, not just downhole length. Why it applies: true\_width\_m is 2.412 **QA/QC Disclosed** Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Why it applies: qaqc\_disclosed is true **Cut-off Undisclosed** Polarity: negative Definition: High-grade interval reported without stating the cut-off grade used for compositing. Why it applies: no cutoff\_grade was stated **Infill Drilling** Polarity: neutral Definition: Confirmatory drilling to raise resource confidence, not new discovery. Why it applies: drill\_program\_type is "mixed" **Nearology Play** Polarity: neutral Definition: Value premise rests on proximity to a known deposit rather than own results. Why it applies: proximity is offered as the value premise: "- 1.4m of 9 g/t Ag, \*\*0.49% Cu\*\* - Four rigs continue to drill at Ballywire, with a fifth rig drilling at the Company's" ### 26-468-26 [Link to this fact](https://atlas-staging.minestarters.com/news/group-eleven-intersects-24m-of-mineralization-including-6-3m-of-7-9-zn-pb-and-14--40fd1b68-bb38-4bb8-9303-861389f4e9e5#fact-drill-facts-72) Ballywire · zinc #### Identity - Hole ID: 26-468-26 - Project: Ballywire - Commodity: zinc - Region: ireland - Reported Region: ireland - Ticker: ZNG.V #### Geometry - Grade: 5.45 - Grade Unit: % - Intercept: 0.82 m - True Width: 0.738 m - From: 371.78 m - To: 372.6 m - Intercept Depth: 360.6 m #### Classification - Program: mixed - Sample Type: drill - Group ID: 26-468-26:371.78-372.6 #### QA/QC - Laboratory: ALS Laboratories - QA/QC Disclosed: Yes - Lab Certified: Yes - QP Signed: Yes - QA/QC Methods: standards, blanks #### Review - Needs Review: No - Interp. Status: scored - Historical: No #### Dates - Event date: 2026-10-14T00:00:00.000Z Reasoning: This very high-grade zinc intercept, though narrow, confirms excellent mineralization quality and continuity in the gap area. - Positive factor: Very high-grade zinc intercept within a significant gap-filling hole - Positive factor: True width estimated at 90% of downhole length - Negative factor: Narrow intercept Evidence · table > 5.45 Context: 0.82 #### Tags used in scoring **True Width Disclosed** Polarity: positive Definition: Actual thickness perpendicular to structure is stated, not just downhole length. Why it applies: true\_width\_m is 0.738 **QA/QC Disclosed** Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Why it applies: qaqc\_disclosed is true **Cut-off Undisclosed** Polarity: negative Definition: High-grade interval reported without stating the cut-off grade used for compositing. Why it applies: no cutoff\_grade was stated **Infill Drilling** Polarity: neutral Definition: Confirmatory drilling to raise resource confidence, not new discovery. Why it applies: drill\_program\_type is "mixed" **Nearology Play** Polarity: neutral Definition: Value premise rests on proximity to a known deposit rather than own results. Why it applies: proximity is offered as the value premise: "- 1.4m of 9 g/t Ag, \*\*0.49% Cu\*\* - Four rigs continue to drill at Ballywire, with a fifth rig drilling at the Company's" ### 26-468-26 [Link to this fact](https://atlas-staging.minestarters.com/news/group-eleven-intersects-24m-of-mineralization-including-6-3m-of-7-9-zn-pb-and-14--40fd1b68-bb38-4bb8-9303-861389f4e9e5#fact-drill-facts-73) Ballywire · lead #### Identity - Hole ID: 26-468-26 - Project: Ballywire - Commodity: lead - Region: ireland - Reported Region: ireland - Ticker: ZNG.V #### Geometry - Grade: 11.25 - Grade Unit: % - Intercept: 0.82 m - True Width: 0.738 m - From: 371.78 m - To: 372.6 m - Intercept Depth: 360.6 m #### Classification - Program: mixed - Sample Type: drill - Group ID: 26-468-26:371.78-372.6 #### QA/QC - Laboratory: ALS Laboratories - QA/QC Disclosed: Yes - Lab Certified: Yes - QP Signed: Yes - QA/QC Methods: standards, blanks #### Review - Needs Review: No - Interp. Status: scored - Historical: No #### Dates - Event date: 2026-10-14T00:00:00.000Z Reasoning: The bonanza lead grade further enhances the exceptional polymetallic nature of this intercept, indicating extremely high-quality mineralization. - Positive factor: Bonanza lead grade contributing to exceptional Zn+Pb mineralization - Positive factor: True width estimated at 90% of downhole length - Negative factor: Narrow intercept Evidence · table > 11.25 Context: 0.82 #### Tags used in scoring **True Width Disclosed** Polarity: positive Definition: Actual thickness perpendicular to structure is stated, not just downhole length. Why it applies: true\_width\_m is 0.738 **QA/QC Disclosed** Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Why it applies: qaqc\_disclosed is true **Cut-off Undisclosed** Polarity: negative Definition: High-grade interval reported without stating the cut-off grade used for compositing. Why it applies: no cutoff\_grade was stated **Infill Drilling** Polarity: neutral Definition: Confirmatory drilling to raise resource confidence, not new discovery. Why it applies: drill\_program\_type is "mixed" **Nearology Play** Polarity: neutral Definition: Value premise rests on proximity to a known deposit rather than own results. Why it applies: proximity is offered as the value premise: "- 1.4m of 9 g/t Ag, \*\*0.49% Cu\*\* - Four rigs continue to drill at Ballywire, with a fifth rig drilling at the Company's" ### 26-468-26 [Link to this fact](https://atlas-staging.minestarters.com/news/group-eleven-intersects-24m-of-mineralization-including-6-3m-of-7-9-zn-pb-and-14--40fd1b68-bb38-4bb8-9303-861389f4e9e5#fact-drill-facts-74) Ballywire · silver #### Identity - Hole ID: 26-468-26 - Project: Ballywire - Commodity: silver - Region: ireland - Reported Region: ireland - Ticker: ZNG.V #### Geometry - Grade: 48.8 - Grade Unit: g/t - Intercept: 0.82 m - True Width: 0.738 m - From: 371.78 m - To: 372.6 m - Intercept Depth: 360.6 m #### Classification - Program: mixed - Sample Type: drill - Group ID: 26-468-26:371.78-372.6 #### QA/QC - Laboratory: ALS Laboratories - QA/QC Disclosed: Yes - Lab Certified: Yes - QP Signed: Yes - QA/QC Methods: standards, blanks #### Review - Needs Review: No - Interp. Status: scored - Historical: No #### Dates - Event date: 2026-10-14T00:00:00.000Z Reasoning: The high silver grade enhances the polymetallic nature of this bonanza-grade intercept, contributing significantly to the overall value of the mineralization. - Positive factor: High-grade silver adding to polymetallic value - Positive factor: True width estimated at 90% of downhole length - Negative factor: Narrow intercept Evidence · table > 48.8 Context: 0.82 #### Tags used in scoring **True Width Disclosed** Polarity: positive Definition: Actual thickness perpendicular to structure is stated, not just downhole length. Why it applies: true\_width\_m is 0.738 **QA/QC Disclosed** Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Why it applies: qaqc\_disclosed is true **Cut-off Undisclosed** Polarity: negative Definition: High-grade interval reported without stating the cut-off grade used for compositing. Why it applies: no cutoff\_grade was stated **Infill Drilling** Polarity: neutral Definition: Confirmatory drilling to raise resource confidence, not new discovery. Why it applies: drill\_program\_type is "mixed" **Nearology Play** Polarity: neutral Definition: Value premise rests on proximity to a known deposit rather than own results. Why it applies: proximity is offered as the value premise: "- 1.4m of 9 g/t Ag, \*\*0.49% Cu\*\* - Four rigs continue to drill at Ballywire, with a fifth rig drilling at the Company's" ### 26-468-26 [Link to this fact](https://atlas-staging.minestarters.com/news/group-eleven-intersects-24m-of-mineralization-including-6-3m-of-7-9-zn-pb-and-14--40fd1b68-bb38-4bb8-9303-861389f4e9e5#fact-drill-facts-75) Ballywire · copper #### Identity - Hole ID: 26-468-26 - Project: Ballywire - Commodity: copper - Region: ireland - Reported Region: ireland - Ticker: ZNG.V #### Geometry - Grade: 0.04 - Grade Unit: % - Intercept: 0.82 m - True Width: 0.738 m - From: 371.78 m - To: 372.6 m - Intercept Depth: 360.6 m #### Classification - Program: mixed - Sample Type: drill - Group ID: 26-468-26:371.78-372.6 #### QA/QC - Laboratory: ALS Laboratories - QA/QC Disclosed: Yes - Lab Certified: Yes - QP Signed: Yes - QA/QC Methods: standards, blanks #### Review - Needs Review: No - Interp. Status: scored - Historical: No #### Dates - Event date: 2026-10-14T00:00:00.000Z Reasoning: The presence of copper, even at a low grade, contributes to the polymetallic nature of this bonanza-grade intercept. - Positive factor: Presence of copper, indicating polymetallic mineralization - Positive factor: True width estimated at 90% of downhole length - Negative factor: Low copper grade - Negative factor: Narrow intercept Evidence · table > 0.04 Context: 0.82 #### Tags used in scoring **True Width Disclosed** Polarity: positive Definition: Actual thickness perpendicular to structure is stated, not just downhole length. Why it applies: true\_width\_m is 0.738 **QA/QC Disclosed** Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Why it applies: qaqc\_disclosed is true **Cut-off Undisclosed** Polarity: negative Definition: High-grade interval reported without stating the cut-off grade used for compositing. Why it applies: no cutoff\_grade was stated **Infill Drilling** Polarity: neutral Definition: Confirmatory drilling to raise resource confidence, not new discovery. Why it applies: drill\_program\_type is "mixed" **Nearology Play** Polarity: neutral Definition: Value premise rests on proximity to a known deposit rather than own results. Why it applies: proximity is offered as the value premise: "- 1.4m of 9 g/t Ag, \*\*0.49% Cu\*\* - Four rigs continue to drill at Ballywire, with a fifth rig drilling at the Company's" ### 26-468-26 [Link to this fact](https://atlas-staging.minestarters.com/news/group-eleven-intersects-24m-of-mineralization-including-6-3m-of-7-9-zn-pb-and-14--40fd1b68-bb38-4bb8-9303-861389f4e9e5#fact-drill-facts-76) Ballywire · antimony #### Identity - Hole ID: 26-468-26 - Project: Ballywire - Commodity: antimony - Region: ireland - Reported Region: ireland - Ticker: ZNG.V #### Geometry - Grade: 0.01 - Grade Unit: % - Intercept: 0.82 m - True Width: 0.738 m - From: 371.78 m - To: 372.6 m - Intercept Depth: 360.6 m #### Classification - Program: mixed - Sample Type: drill - Group ID: 26-468-26:371.78-372.6 #### QA/QC - Laboratory: ALS Laboratories - QA/QC Disclosed: Yes - Lab Certified: Yes - QP Signed: Yes - QA/QC Methods: standards, blanks #### Review - Needs Review: No - Interp. Status: scored - Historical: No #### Dates - Event date: 2026-10-14T00:00:00.000Z Reasoning: The presence of antimony, even at a low grade, contributes to the polymetallic nature of this bonanza-grade intercept. - Positive factor: Presence of antimony, indicating polymetallic mineralization - Positive factor: True width estimated at 90% of downhole length - Negative factor: Low antimony grade - Negative factor: Narrow intercept Evidence · table > 0.01 Context: 0.82 #### Tags used in scoring **True Width Disclosed** Polarity: positive Definition: Actual thickness perpendicular to structure is stated, not just downhole length. Why it applies: true\_width\_m is 0.738 **QA/QC Disclosed** Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Why it applies: qaqc\_disclosed is true **Cut-off Undisclosed** Polarity: negative Definition: High-grade interval reported without stating the cut-off grade used for compositing. Why it applies: no cutoff\_grade was stated **Infill Drilling** Polarity: neutral Definition: Confirmatory drilling to raise resource confidence, not new discovery. Why it applies: drill\_program\_type is "mixed" **Nearology Play** Polarity: neutral Definition: Value premise rests on proximity to a known deposit rather than own results. Why it applies: proximity is offered as the value premise: "- 1.4m of 9 g/t Ag, \*\*0.49% Cu\*\* - Four rigs continue to drill at Ballywire, with a fifth rig drilling at the Company's" ### 26-468-26 [Link to this fact](https://atlas-staging.minestarters.com/news/group-eleven-intersects-24m-of-mineralization-including-6-3m-of-7-9-zn-pb-and-14--40fd1b68-bb38-4bb8-9303-861389f4e9e5#fact-drill-facts-77) Ballywire · zinc #### Identity - Hole ID: 26-468-26 - Project: Ballywire - Commodity: zinc - Region: ireland - Reported Region: ireland - Ticker: ZNG.V #### Geometry - Grade: 0.02 - Grade Unit: % - Intercept: 1.85 m - True Width: 1.48 m - From: 401.46 m - To: 403.31 m - Intercept Depth: 401.46 m #### Classification - Program: mixed - Sample Type: drill - Group ID: 26-468-26:401.46-403.31 #### QA/QC - Laboratory: ALS Laboratories - QA/QC Disclosed: Yes - Lab Certified: Yes - QP Signed: Yes - QA/QC Methods: standards, blanks #### Review - Needs Review: No - Interp. Status: scored - Historical: No #### Dates - Event date: 2026-10-14T00:00:00.000Z Reasoning: While the zinc grade is very low, this narrow intercept indicates another zone of copper-silver mineralization at depth. - Positive factor: True width estimated at 80% of downhole length - Negative factor: Very low zinc grade - Negative factor: Narrow intercept Evidence · table > 0.02 Context: 1.85 #### Tags used in scoring **True Width Disclosed** Polarity: positive Definition: Actual thickness perpendicular to structure is stated, not just downhole length. Why it applies: true\_width\_m is 1.48 **QA/QC Disclosed** Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Why it applies: qaqc\_disclosed is true **Cut-off Undisclosed** Polarity: negative Definition: High-grade interval reported without stating the cut-off grade used for compositing. Why it applies: no cutoff\_grade was stated **Infill Drilling** Polarity: neutral Definition: Confirmatory drilling to raise resource confidence, not new discovery. Why it applies: drill\_program\_type is "mixed" **Nearology Play** Polarity: neutral Definition: Value premise rests on proximity to a known deposit rather than own results. Why it applies: proximity is offered as the value premise: "- 1.4m of 9 g/t Ag, \*\*0.49% Cu\*\* - Four rigs continue to drill at Ballywire, with a fifth rig drilling at the Company's" ### 26-468-26 [Link to this fact](https://atlas-staging.minestarters.com/news/group-eleven-intersects-24m-of-mineralization-including-6-3m-of-7-9-zn-pb-and-14--40fd1b68-bb38-4bb8-9303-861389f4e9e5#fact-drill-facts-78) Ballywire · lead #### Identity - Hole ID: 26-468-26 - Project: Ballywire - Commodity: lead - Region: ireland - Reported Region: ireland - Ticker: ZNG.V #### Geometry - Grade: 0.02 - Grade Unit: % - Intercept: 1.85 m - True Width: 1.48 m - From: 401.46 m - To: 403.31 m - Intercept Depth: 401.46 m #### Classification - Program: mixed - Sample Type: drill - Group ID: 26-468-26:401.46-403.31 #### QA/QC - Laboratory: ALS Laboratories - QA/QC Disclosed: Yes - Lab Certified: Yes - QP Signed: Yes - QA/QC Methods: standards, blanks #### Review - Needs Review: No - Interp. Status: scored - Historical: No #### Dates - Event date: 2026-10-14T00:00:00.000Z Reasoning: While the lead grade is very low, this narrow intercept indicates another zone of copper-silver mineralization at depth. - Positive factor: True width estimated at 80% of downhole length - Negative factor: Very low lead grade - Negative factor: Narrow intercept Evidence · table > 0.02 Context: 1.85 #### Tags used in scoring **True Width Disclosed** Polarity: positive Definition: Actual thickness perpendicular to structure is stated, not just downhole length. Why it applies: true\_width\_m is 1.48 **QA/QC Disclosed** Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Why it applies: qaqc\_disclosed is true **Cut-off Undisclosed** Polarity: negative Definition: High-grade interval reported without stating the cut-off grade used for compositing. Why it applies: no cutoff\_grade was stated **Infill Drilling** Polarity: neutral Definition: Confirmatory drilling to raise resource confidence, not new discovery. Why it applies: drill\_program\_type is "mixed" **Nearology Play** Polarity: neutral Definition: Value premise rests on proximity to a known deposit rather than own results. Why it applies: proximity is offered as the value premise: "- 1.4m of 9 g/t Ag, \*\*0.49% Cu\*\* - Four rigs continue to drill at Ballywire, with a fifth rig drilling at the Company's" ### 26-468-26 [Link to this fact](https://atlas-staging.minestarters.com/news/group-eleven-intersects-24m-of-mineralization-including-6-3m-of-7-9-zn-pb-and-14--40fd1b68-bb38-4bb8-9303-861389f4e9e5#fact-drill-facts-79) Ballywire · silver #### Identity - Hole ID: 26-468-26 - Project: Ballywire - Commodity: silver - Region: ireland - Reported Region: ireland - Ticker: ZNG.V #### Geometry - Grade: 56.6 - Grade Unit: g/t - Intercept: 1.85 m - True Width: 1.48 m - From: 401.46 m - To: 403.31 m - Intercept Depth: 401.46 m #### Classification - Program: mixed - Sample Type: drill - Group ID: 26-468-26:401.46-403.31 #### QA/QC - Laboratory: ALS Laboratories - QA/QC Disclosed: Yes - Lab Certified: Yes - QP Signed: Yes - QA/QC Methods: standards, blanks #### Review - Needs Review: No - Interp. Status: scored - Historical: No #### Dates - Event date: 2026-10-14T00:00:00.000Z Reasoning: This high-grade silver intercept significantly enhances the polymetallic nature of the deeper mineralization, indicating a valuable zone. - Positive factor: High-grade silver over a good width for deeper mineralization - Positive factor: True width estimated at 80% of downhole length Evidence · table > 56.6 Context: 1.85 #### Tags used in scoring **True Width Disclosed** Polarity: positive Definition: Actual thickness perpendicular to structure is stated, not just downhole length. Why it applies: true\_width\_m is 1.48 **QA/QC Disclosed** Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Why it applies: qaqc\_disclosed is true **Cut-off Undisclosed** Polarity: negative Definition: High-grade interval reported without stating the cut-off grade used for compositing. Why it applies: no cutoff\_grade was stated **Infill Drilling** Polarity: neutral Definition: Confirmatory drilling to raise resource confidence, not new discovery. Why it applies: drill\_program\_type is "mixed" **Nearology Play** Polarity: neutral Definition: Value premise rests on proximity to a known deposit rather than own results. Why it applies: proximity is offered as the value premise: "- 1.4m of 9 g/t Ag, \*\*0.49% Cu\*\* - Four rigs continue to drill at Ballywire, with a fifth rig drilling at the Company's" ### 26-468-26 [Link to this fact](https://atlas-staging.minestarters.com/news/group-eleven-intersects-24m-of-mineralization-including-6-3m-of-7-9-zn-pb-and-14--40fd1b68-bb38-4bb8-9303-861389f4e9e5#fact-drill-facts-80) Ballywire · copper #### Identity - Hole ID: 26-468-26 - Project: Ballywire - Commodity: copper - Region: ireland - Reported Region: ireland - Ticker: ZNG.V #### Geometry - Grade: 0.12 - Grade Unit: % - Intercept: 1.85 m - True Width: 1.48 m - From: 401.46 m - To: 403.31 m - Intercept Depth: 401.46 m #### Classification - Program: mixed - Sample Type: drill - Group ID: 26-468-26:401.46-403.31 #### QA/QC - Laboratory: ALS Laboratories - QA/QC Disclosed: Yes - Lab Certified: Yes - QP Signed: Yes - QA/QC Methods: standards, blanks #### Review - Needs Review: No - Interp. Status: scored - Historical: No #### Dates - Event date: 2026-10-14T00:00:00.000Z Reasoning: This moderate copper grade over a good width contributes to the polymetallic nature of the deeper mineralization. - Positive factor: Moderate copper grade over a good width for deeper mineralization - Positive factor: True width estimated at 80% of downhole length Evidence · table > 0.12 Context: 1.85 #### Tags used in scoring **True Width Disclosed** Polarity: positive Definition: Actual thickness perpendicular to structure is stated, not just downhole length. Why it applies: true\_width\_m is 1.48 **QA/QC Disclosed** Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Why it applies: qaqc\_disclosed is true **Cut-off Undisclosed** Polarity: negative Definition: High-grade interval reported without stating the cut-off grade used for compositing. Why it applies: no cutoff\_grade was stated **Infill Drilling** Polarity: neutral Definition: Confirmatory drilling to raise resource confidence, not new discovery. Why it applies: drill\_program\_type is "mixed" **Nearology Play** Polarity: neutral Definition: Value premise rests on proximity to a known deposit rather than own results. Why it applies: proximity is offered as the value premise: "- 1.4m of 9 g/t Ag, \*\*0.49% Cu\*\* - Four rigs continue to drill at Ballywire, with a fifth rig drilling at the Company's" ### 26-468-26 [Link to this fact](https://atlas-staging.minestarters.com/news/group-eleven-intersects-24m-of-mineralization-including-6-3m-of-7-9-zn-pb-and-14--40fd1b68-bb38-4bb8-9303-861389f4e9e5#fact-drill-facts-81) Ballywire · zinc #### Identity - Hole ID: 26-468-26 - Project: Ballywire - Commodity: zinc - Region: ireland - Reported Region: ireland - Ticker: ZNG.V #### Geometry - Grade: 0.03 - Grade Unit: % - Intercept: 0.91 m - True Width: 0.728 m - From: 402.4 m - To: 403.31 m - Intercept Depth: 401.46 m #### Classification - Program: mixed - Sample Type: drill - Group ID: 26-468-26:402.4-403.31 #### QA/QC - Laboratory: ALS Laboratories - QA/QC Disclosed: Yes - Lab Certified: Yes - QP Signed: Yes - QA/QC Methods: standards, blanks #### Review - Needs Review: No - Interp. Status: scored - Historical: No #### Dates - Event date: 2026-10-14T00:00:00.000Z Reasoning: While the zinc grade is very low, this narrow intercept shows a higher-grade copper-silver zone within the deeper mineralization. - Positive factor: True width estimated at 80% of downhole length - Negative factor: Very low zinc grade - Negative factor: Narrow intercept Evidence · table > 0.03 Context: 0.91 #### Tags used in scoring **True Width Disclosed** Polarity: positive Definition: Actual thickness perpendicular to structure is stated, not just downhole length. Why it applies: true\_width\_m is 0.728 **QA/QC Disclosed** Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Why it applies: qaqc\_disclosed is true **Cut-off Undisclosed** Polarity: negative Definition: High-grade interval reported without stating the cut-off grade used for compositing. Why it applies: no cutoff\_grade was stated **Infill Drilling** Polarity: neutral Definition: Confirmatory drilling to raise resource confidence, not new discovery. Why it applies: drill\_program\_type is "mixed" **Nearology Play** Polarity: neutral Definition: Value premise rests on proximity to a known deposit rather than own results. Why it applies: proximity is offered as the value premise: "- 1.4m of 9 g/t Ag, \*\*0.49% Cu\*\* - Four rigs continue to drill at Ballywire, with a fifth rig drilling at the Company's" ### 26-468-26 [Link to this fact](https://atlas-staging.minestarters.com/news/group-eleven-intersects-24m-of-mineralization-including-6-3m-of-7-9-zn-pb-and-14--40fd1b68-bb38-4bb8-9303-861389f4e9e5#fact-drill-facts-82) Ballywire · lead #### Identity - Hole ID: 26-468-26 - Project: Ballywire - Commodity: lead - Region: ireland - Reported Region: ireland - Ticker: ZNG.V #### Geometry - Grade: 0.03 - Grade Unit: % - Intercept: 0.91 m - True Width: 0.728 m - From: 402.4 m - To: 403.31 m - Intercept Depth: 401.46 m #### Classification - Program: mixed - Sample Type: drill - Group ID: 26-468-26:402.4-403.31 #### QA/QC - Laboratory: ALS Laboratories - QA/QC Disclosed: Yes - Lab Certified: Yes - QP Signed: Yes - QA/QC Methods: standards, blanks #### Review - Needs Review: No - Interp. Status: scored - Historical: No #### Dates - Event date: 2026-10-14T00:00:00.000Z Reasoning: While the lead grade is very low, this narrow intercept shows a higher-grade copper-silver zone within the deeper mineralization. - Positive factor: True width estimated at 80% of downhole length - Negative factor: Very low lead grade - Negative factor: Narrow intercept Evidence · table > 0.03 Context: 0.91 #### Tags used in scoring **True Width Disclosed** Polarity: positive Definition: Actual thickness perpendicular to structure is stated, not just downhole length. Why it applies: true\_width\_m is 0.728 **QA/QC Disclosed** Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Why it applies: qaqc\_disclosed is true **Cut-off Undisclosed** Polarity: negative Definition: High-grade interval reported without stating the cut-off grade used for compositing. Why it applies: no cutoff\_grade was stated **Infill Drilling** Polarity: neutral Definition: Confirmatory drilling to raise resource confidence, not new discovery. Why it applies: drill\_program\_type is "mixed" **Nearology Play** Polarity: neutral Definition: Value premise rests on proximity to a known deposit rather than own results. Why it applies: proximity is offered as the value premise: "- 1.4m of 9 g/t Ag, \*\*0.49% Cu\*\* - Four rigs continue to drill at Ballywire, with a fifth rig drilling at the Company's" ### 26-468-26 [Link to this fact](https://atlas-staging.minestarters.com/news/group-eleven-intersects-24m-of-mineralization-including-6-3m-of-7-9-zn-pb-and-14--40fd1b68-bb38-4bb8-9303-861389f4e9e5#fact-drill-facts-83) Ballywire · silver #### Identity - Hole ID: 26-468-26 - Project: Ballywire - Commodity: silver - Region: ireland - Reported Region: ireland - Ticker: ZNG.V #### Geometry - Grade: 92.4 - Grade Unit: g/t - Intercept: 0.91 m - True Width: 0.728 m - From: 402.4 m - To: 403.31 m - Intercept Depth: 401.46 m #### Classification - Program: mixed - Sample Type: drill - Group ID: 26-468-26:402.4-403.31 #### QA/QC - Laboratory: ALS Laboratories - QA/QC Disclosed: Yes - Lab Certified: Yes - QP Signed: Yes - QA/QC Methods: standards, blanks #### Review - Needs Review: No - Interp. Status: scored - Historical: No #### Dates - Event date: 2026-10-14T00:00:00.000Z Reasoning: This very high-grade silver intercept significantly enhances the polymetallic nature of the deeper mineralization, indicating a valuable, concentrated zone. - Positive factor: Very high-grade silver over a narrow but significant interval for deeper mineralization - Positive factor: True width estimated at 80% of downhole length Evidence · table > 92.4 Context: 0.91 #### Tags used in scoring **True Width Disclosed** Polarity: positive Definition: Actual thickness perpendicular to structure is stated, not just downhole length. Why it applies: true\_width\_m is 0.728 **QA/QC Disclosed** Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Why it applies: qaqc\_disclosed is true **Cut-off Undisclosed** Polarity: negative Definition: High-grade interval reported without stating the cut-off grade used for compositing. Why it applies: no cutoff\_grade was stated **Infill Drilling** Polarity: neutral Definition: Confirmatory drilling to raise resource confidence, not new discovery. Why it applies: drill\_program\_type is "mixed" **Nearology Play** Polarity: neutral Definition: Value premise rests on proximity to a known deposit rather than own results. Why it applies: proximity is offered as the value premise: "- 1.4m of 9 g/t Ag, \*\*0.49% Cu\*\* - Four rigs continue to drill at Ballywire, with a fifth rig drilling at the Company's" ### 26-468-26 [Link to this fact](https://atlas-staging.minestarters.com/news/group-eleven-intersects-24m-of-mineralization-including-6-3m-of-7-9-zn-pb-and-14--40fd1b68-bb38-4bb8-9303-861389f4e9e5#fact-drill-facts-84) Ballywire · copper #### Identity - Hole ID: 26-468-26 - Project: Ballywire - Commodity: copper - Region: ireland - Reported Region: ireland - Ticker: ZNG.V #### Geometry - Grade: 0.22 - Grade Unit: % - Intercept: 0.91 m - True Width: 0.728 m - From: 402.4 m - To: 403.31 m - Intercept Depth: 401.46 m #### Classification - Program: mixed - Sample Type: drill - Group ID: 26-468-26:402.4-403.31 #### QA/QC - Laboratory: ALS Laboratories - QA/QC Disclosed: Yes - Lab Certified: Yes - QP Signed: Yes - QA/QC Methods: standards, blanks #### Review - Needs Review: No - Interp. Status: scored - Historical: No #### Dates - Event date: 2026-10-14T00:00:00.000Z Reasoning: This good copper grade over a narrow but significant width further enhances the polymetallic nature of the deeper mineralization, indicating a valuable, concentrated zone. - Positive factor: Good copper grade over a narrow but significant interval for deeper mineralization - Positive factor: True width estimated at 80% of downhole length Evidence · table > 0.22 Context: 0.91 #### Tags used in scoring **True Width Disclosed** Polarity: positive Definition: Actual thickness perpendicular to structure is stated, not just downhole length. Why it applies: true\_width\_m is 0.728 **QA/QC Disclosed** Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Why it applies: qaqc\_disclosed is true **Cut-off Undisclosed** Polarity: negative Definition: High-grade interval reported without stating the cut-off grade used for compositing. Why it applies: no cutoff\_grade was stated **Infill Drilling** Polarity: neutral Definition: Confirmatory drilling to raise resource confidence, not new discovery. Why it applies: drill\_program\_type is "mixed" **Nearology Play** Polarity: neutral Definition: Value premise rests on proximity to a known deposit rather than own results. Why it applies: proximity is offered as the value premise: "- 1.4m of 9 g/t Ag, \*\*0.49% Cu\*\* - Four rigs continue to drill at Ballywire, with a fifth rig drilling at the Company's" ### 26-468-26 [Link to this fact](https://atlas-staging.minestarters.com/news/group-eleven-intersects-24m-of-mineralization-including-6-3m-of-7-9-zn-pb-and-14--40fd1b68-bb38-4bb8-9303-861389f4e9e5#fact-drill-facts-85) Ballywire · antimony #### Identity - Hole ID: 26-468-26 - Project: Ballywire - Commodity: antimony - Region: ireland - Reported Region: ireland - Ticker: ZNG.V #### Geometry - Grade: 0.01 - Grade Unit: % - Intercept: 0.91 m - True Width: 0.728 m - From: 402.4 m - To: 403.31 m - Intercept Depth: 401.46 m #### Classification - Program: mixed - Sample Type: drill - Group ID: 26-468-26:402.4-403.31 #### QA/QC - Laboratory: ALS Laboratories - QA/QC Disclosed: Yes - Lab Certified: Yes - QP Signed: Yes - QA/QC Methods: standards, blanks #### Review - Needs Review: No - Interp. Status: scored - Historical: No #### Dates - Event date: 2026-10-14T00:00:00.000Z Reasoning: The presence of antimony, even at a low grade, contributes to the polymetallic nature of this higher-grade deeper mineralization. - Positive factor: Presence of antimony, indicating polymetallic mineralization - Positive factor: True width estimated at 80% of downhole length - Negative factor: Low antimony grade - Negative factor: Narrow intercept Evidence · table > 0.01 Context: 0.91 #### Tags used in scoring **True Width Disclosed** Polarity: positive Definition: Actual thickness perpendicular to structure is stated, not just downhole length. Why it applies: true\_width\_m is 0.728 **QA/QC Disclosed** Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Why it applies: qaqc\_disclosed is true **Cut-off Undisclosed** Polarity: negative Definition: High-grade interval reported without stating the cut-off grade used for compositing. Why it applies: no cutoff\_grade was stated **Infill Drilling** Polarity: neutral Definition: Confirmatory drilling to raise resource confidence, not new discovery. Why it applies: drill\_program\_type is "mixed" **Nearology Play** Polarity: neutral Definition: Value premise rests on proximity to a known deposit rather than own results. Why it applies: proximity is offered as the value premise: "- 1.4m of 9 g/t Ag, \*\*0.49% Cu\*\* - Four rigs continue to drill at Ballywire, with a fifth rig drilling at the Company's" ### 26-3552-58 [Link to this fact](https://atlas-staging.minestarters.com/news/group-eleven-intersects-24m-of-mineralization-including-6-3m-of-7-9-zn-pb-and-14--40fd1b68-bb38-4bb8-9303-861389f4e9e5#fact-drill-facts-86) Ballywire · zinc #### Identity - Hole ID: 26-3552-58 - Project: Ballywire - Commodity: zinc - Region: ireland - Reported Region: ireland - Ticker: ZNG.V #### Geometry - Grade: 0.14 - Grade Unit: % - Intercept: 42.96 m - True Width: 34.368 m - From: 292.54 m - To: 335.5 m - Intercept Depth: 292.54 m #### Classification - Program: exploration - Sample Type: drill - Group ID: 26-3552-58:292.54-335.5 #### QA/QC - Laboratory: ALS Laboratories - QA/QC Disclosed: Yes - Lab Certified: Yes - QP Signed: Yes - QA/QC Methods: standards, blanks #### Review - Needs Review: No - Interp. Status: scored - Historical: No #### Dates - Event date: 2026-10-14T00:00:00.000Z Reasoning: This very broad intercept indicates widespread but low-grade zinc mineralization at the NE edge of the discovery area. - Positive factor: Very broad intercept length - Positive factor: True width estimated at 80% of downhole length - Negative factor: Low zinc grade Evidence · table > 0.14 Context: 42.96 #### Tags used in scoring **True Width Disclosed** Polarity: positive Definition: Actual thickness perpendicular to structure is stated, not just downhole length. Why it applies: true\_width\_m is 34.368 **QA/QC Disclosed** Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Why it applies: qaqc\_disclosed is true **Cut-off Undisclosed** Polarity: negative Definition: High-grade interval reported without stating the cut-off grade used for compositing. Why it applies: no cutoff\_grade was stated **Nearology Play** Polarity: neutral Definition: Value premise rests on proximity to a known deposit rather than own results. Why it applies: proximity is offered as the value premise: "- 1.4m of 9 g/t Ag, \*\*0.49% Cu\*\* - Four rigs continue to drill at Ballywire, with a fifth rig drilling at the Company's" ### 26-3552-58 [Link to this fact](https://atlas-staging.minestarters.com/news/group-eleven-intersects-24m-of-mineralization-including-6-3m-of-7-9-zn-pb-and-14--40fd1b68-bb38-4bb8-9303-861389f4e9e5#fact-drill-facts-87) Ballywire · lead #### Identity - Hole ID: 26-3552-58 - Project: Ballywire - Commodity: lead - Region: ireland - Reported Region: ireland - Ticker: ZNG.V #### Geometry - Grade: 0.07 - Grade Unit: % - Intercept: 42.96 m - True Width: 34.368 m - From: 292.54 m - To: 335.5 m - Intercept Depth: 292.54 m #### Classification - Program: exploration - Sample Type: drill - Group ID: 26-3552-58:292.54-335.5 #### QA/QC - Laboratory: ALS Laboratories - QA/QC Disclosed: Yes - Lab Certified: Yes - QP Signed: Yes - QA/QC Methods: standards, blanks #### Review - Needs Review: No - Interp. Status: scored - Historical: No #### Dates - Event date: 2026-10-14T00:00:00.000Z Reasoning: This very broad intercept indicates widespread but low-grade lead mineralization at the NE edge of the discovery area. - Positive factor: Very broad intercept length - Positive factor: True width estimated at 80% of downhole length - Negative factor: Low lead grade Evidence · table > 0.07 Context: 42.96 #### Tags used in scoring **True Width Disclosed** Polarity: positive Definition: Actual thickness perpendicular to structure is stated, not just downhole length. Why it applies: true\_width\_m is 34.368 **QA/QC Disclosed** Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Why it applies: qaqc\_disclosed is true **Cut-off Undisclosed** Polarity: negative Definition: High-grade interval reported without stating the cut-off grade used for compositing. Why it applies: no cutoff\_grade was stated **Nearology Play** Polarity: neutral Definition: Value premise rests on proximity to a known deposit rather than own results. Why it applies: proximity is offered as the value premise: "- 1.4m of 9 g/t Ag, \*\*0.49% Cu\*\* - Four rigs continue to drill at Ballywire, with a fifth rig drilling at the Company's" ### 26-3552-58 [Link to this fact](https://atlas-staging.minestarters.com/news/group-eleven-intersects-24m-of-mineralization-including-6-3m-of-7-9-zn-pb-and-14--40fd1b68-bb38-4bb8-9303-861389f4e9e5#fact-drill-facts-88) Ballywire · silver #### Identity - Hole ID: 26-3552-58 - Project: Ballywire - Commodity: silver - Region: ireland - Reported Region: ireland - Ticker: ZNG.V #### Geometry - Grade: 1.5 - Grade Unit: g/t - Intercept: 42.96 m - True Width: 34.368 m - From: 292.54 m - To: 335.5 m - Intercept Depth: 292.54 m #### Classification - Program: exploration - Sample Type: drill - Group ID: 26-3552-58:292.54-335.5 #### QA/QC - Laboratory: ALS Laboratories - QA/QC Disclosed: Yes - Lab Certified: Yes - QP Signed: Yes - QA/QC Methods: standards, blanks #### Review - Needs Review: No - Interp. Status: scored - Historical: No #### Dates - Event date: 2026-10-14T00:00:00.000Z Reasoning: This very broad intercept indicates widespread but low-grade silver mineralization at the NE edge of the discovery area. - Positive factor: Very broad intercept length - Positive factor: True width estimated at 80% of downhole length - Negative factor: Low silver grade Evidence · table > 1.5 Context: 42.96 #### Tags used in scoring **True Width Disclosed** Polarity: positive Definition: Actual thickness perpendicular to structure is stated, not just downhole length. Why it applies: true\_width\_m is 34.368 **QA/QC Disclosed** Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Why it applies: qaqc\_disclosed is true **Cut-off Undisclosed** Polarity: negative Definition: High-grade interval reported without stating the cut-off grade used for compositing. Why it applies: no cutoff\_grade was stated **Nearology Play** Polarity: neutral Definition: Value premise rests on proximity to a known deposit rather than own results. Why it applies: proximity is offered as the value premise: "- 1.4m of 9 g/t Ag, \*\*0.49% Cu\*\* - Four rigs continue to drill at Ballywire, with a fifth rig drilling at the Company's" ### 26-3552-58 [Link to this fact](https://atlas-staging.minestarters.com/news/group-eleven-intersects-24m-of-mineralization-including-6-3m-of-7-9-zn-pb-and-14--40fd1b68-bb38-4bb8-9303-861389f4e9e5#fact-drill-facts-89) Ballywire · copper #### Identity - Hole ID: 26-3552-58 - Project: Ballywire - Commodity: copper - Region: ireland - Reported Region: ireland - Ticker: ZNG.V #### Geometry - Grade: 0.01 - Grade Unit: % - Intercept: 42.96 m - True Width: 34.368 m - From: 292.54 m - To: 335.5 m - Intercept Depth: 292.54 m #### Classification - Program: exploration - Sample Type: drill - Group ID: 26-3552-58:292.54-335.5 #### QA/QC - Laboratory: ALS Laboratories - QA/QC Disclosed: Yes - Lab Certified: Yes - QP Signed: Yes - QA/QC Methods: standards, blanks #### Review - Needs Review: No - Interp. Status: scored - Historical: No #### Dates - Event date: 2026-10-14T00:00:00.000Z Reasoning: This very broad intercept indicates widespread but very low-grade copper mineralization at the NE edge of the discovery area. - Positive factor: Very broad intercept length - Positive factor: True width estimated at 80% of downhole length - Negative factor: Very low copper grade Evidence · table > 0.01 Context: 42.96 #### Tags used in scoring **True Width Disclosed** Polarity: positive Definition: Actual thickness perpendicular to structure is stated, not just downhole length. Why it applies: true\_width\_m is 34.368 **QA/QC Disclosed** Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Why it applies: qaqc\_disclosed is true **Cut-off Undisclosed** Polarity: negative Definition: High-grade interval reported without stating the cut-off grade used for compositing. Why it applies: no cutoff\_grade was stated **Nearology Play** Polarity: neutral Definition: Value premise rests on proximity to a known deposit rather than own results. Why it applies: proximity is offered as the value premise: "- 1.4m of 9 g/t Ag, \*\*0.49% Cu\*\* - Four rigs continue to drill at Ballywire, with a fifth rig drilling at the Company's" ### 26-3552-58 [Link to this fact](https://atlas-staging.minestarters.com/news/group-eleven-intersects-24m-of-mineralization-including-6-3m-of-7-9-zn-pb-and-14--40fd1b68-bb38-4bb8-9303-861389f4e9e5#fact-drill-facts-90) Ballywire · zinc #### Identity - Hole ID: 26-3552-58 - Project: Ballywire - Commodity: zinc - Region: ireland - Reported Region: ireland - Ticker: ZNG.V #### Geometry - Grade: 0.2 - Grade Unit: % - Intercept: 24.58 m - True Width: 19.664 m - From: 293.49 m - To: 318.07 m - Intercept Depth: 292.54 m #### Classification - Program: exploration - Sample Type: drill - Group ID: 26-3552-58:293.49-318.07 #### QA/QC - Laboratory: ALS Laboratories - QA/QC Disclosed: Yes - Lab Certified: Yes - QP Signed: Yes - QA/QC Methods: standards, blanks #### Review - Needs Review: No - Interp. Status: scored - Historical: No #### Dates - Event date: 2026-10-14T00:00:00.000Z Reasoning: This broad intercept indicates continuous but low-grade zinc mineralization within the broader zone at the NE edge. - Positive factor: Broad intercept length - Positive factor: True width estimated at 80% of downhole length - Negative factor: Low zinc grade Evidence · table > 0.20 Context: 24.58 #### Tags used in scoring **True Width Disclosed** Polarity: positive Definition: Actual thickness perpendicular to structure is stated, not just downhole length. Why it applies: true\_width\_m is 19.664 **QA/QC Disclosed** Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Why it applies: qaqc\_disclosed is true **Cut-off Undisclosed** Polarity: negative Definition: High-grade interval reported without stating the cut-off grade used for compositing. Why it applies: no cutoff\_grade was stated **Nearology Play** Polarity: neutral Definition: Value premise rests on proximity to a known deposit rather than own results. Why it applies: proximity is offered as the value premise: "- 1.4m of 9 g/t Ag, \*\*0.49% Cu\*\* - Four rigs continue to drill at Ballywire, with a fifth rig drilling at the Company's" ### 26-3552-58 [Link to this fact](https://atlas-staging.minestarters.com/news/group-eleven-intersects-24m-of-mineralization-including-6-3m-of-7-9-zn-pb-and-14--40fd1b68-bb38-4bb8-9303-861389f4e9e5#fact-drill-facts-91) Ballywire · lead #### Identity - Hole ID: 26-3552-58 - Project: Ballywire - Commodity: lead - Region: ireland - Reported Region: ireland - Ticker: ZNG.V #### Geometry - Grade: 0.11 - Grade Unit: % - Intercept: 24.58 m - True Width: 19.664 m - From: 293.49 m - To: 318.07 m - Intercept Depth: 292.54 m #### Classification - Program: exploration - Sample Type: drill - Group ID: 26-3552-58:293.49-318.07 #### QA/QC - Laboratory: ALS Laboratories - QA/QC Disclosed: Yes - Lab Certified: Yes - QP Signed: Yes - QA/QC Methods: standards, blanks #### Review - Needs Review: No - Interp. Status: scored - Historical: No #### Dates - Event date: 2026-10-14T00:00:00.000Z Reasoning: This broad intercept indicates continuous but low-grade lead mineralization within the broader zone at the NE edge. - Positive factor: Broad intercept length - Positive factor: True width estimated at 80% of downhole length - Negative factor: Low lead grade Evidence · table > 0.11 Context: 24.58 #### Tags used in scoring **True Width Disclosed** Polarity: positive Definition: Actual thickness perpendicular to structure is stated, not just downhole length. Why it applies: true\_width\_m is 19.664 **QA/QC Disclosed** Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Why it applies: qaqc\_disclosed is true **Cut-off Undisclosed** Polarity: negative Definition: High-grade interval reported without stating the cut-off grade used for compositing. Why it applies: no cutoff\_grade was stated **Nearology Play** Polarity: neutral Definition: Value premise rests on proximity to a known deposit rather than own results. Why it applies: proximity is offered as the value premise: "- 1.4m of 9 g/t Ag, \*\*0.49% Cu\*\* - Four rigs continue to drill at Ballywire, with a fifth rig drilling at the Company's" ### 26-3552-58 [Link to this fact](https://atlas-staging.minestarters.com/news/group-eleven-intersects-24m-of-mineralization-including-6-3m-of-7-9-zn-pb-and-14--40fd1b68-bb38-4bb8-9303-861389f4e9e5#fact-drill-facts-92) Ballywire · silver #### Identity - Hole ID: 26-3552-58 - Project: Ballywire - Commodity: silver - Region: ireland - Reported Region: ireland - Ticker: ZNG.V #### Geometry - Grade: 0.9 - Grade Unit: g/t - Intercept: 24.58 m - True Width: 19.664 m - From: 293.49 m - To: 318.07 m - Intercept Depth: 292.54 m #### Classification - Program: exploration - Sample Type: drill - Group ID: 26-3552-58:293.49-318.07 #### QA/QC - Laboratory: ALS Laboratories - QA/QC Disclosed: Yes - Lab Certified: Yes - QP Signed: Yes - QA/QC Methods: standards, blanks #### Review - Needs Review: No - Interp. Status: scored - Historical: No #### Dates - Event date: 2026-10-14T00:00:00.000Z Reasoning: This broad intercept indicates continuous but low-grade silver mineralization within the broader zone at the NE edge. - Positive factor: Broad intercept length - Positive factor: True width estimated at 80% of downhole length - Negative factor: Low silver grade Evidence · table > 0.9 Context: 24.58 #### Tags used in scoring **True Width Disclosed** Polarity: positive Definition: Actual thickness perpendicular to structure is stated, not just downhole length. Why it applies: true\_width\_m is 19.664 **QA/QC Disclosed** Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Why it applies: qaqc\_disclosed is true **Cut-off Undisclosed** Polarity: negative Definition: High-grade interval reported without stating the cut-off grade used for compositing. Why it applies: no cutoff\_grade was stated **Nearology Play** Polarity: neutral Definition: Value premise rests on proximity to a known deposit rather than own results. Why it applies: proximity is offered as the value premise: "- 1.4m of 9 g/t Ag, \*\*0.49% Cu\*\* - Four rigs continue to drill at Ballywire, with a fifth rig drilling at the Company's" ### 26-3552-58 [Link to this fact](https://atlas-staging.minestarters.com/news/group-eleven-intersects-24m-of-mineralization-including-6-3m-of-7-9-zn-pb-and-14--40fd1b68-bb38-4bb8-9303-861389f4e9e5#fact-drill-facts-93) Ballywire · zinc #### Identity - Hole ID: 26-3552-58 - Project: Ballywire - Commodity: zinc - Region: ireland - Reported Region: ireland - Ticker: ZNG.V #### Geometry - Grade: 0.37 - Grade Unit: % - Intercept: 3.71 m - True Width: 2.968 m - From: 295.54 m - To: 299.25 m - Intercept Depth: 292.54 m #### Classification - Program: exploration - Sample Type: drill - Group ID: 26-3552-58:295.54-299.25 #### QA/QC - Laboratory: ALS Laboratories - QA/QC Disclosed: Yes - Lab Certified: Yes - QP Signed: Yes - QA/QC Methods: standards, blanks #### Review - Needs Review: No - Interp. Status: scored - Historical: No #### Dates - Event date: 2026-10-14T00:00:00.000Z Reasoning: This moderate zinc grade over a good width indicates a slightly higher-grade zone within the broader low-grade mineralization. - Positive factor: Moderate zinc grade over a good width - Positive factor: True width estimated at 80% of downhole length Evidence · table > 0.37 Context: 3.71 #### Tags used in scoring **True Width Disclosed** Polarity: positive Definition: Actual thickness perpendicular to structure is stated, not just downhole length. Why it applies: true\_width\_m is 2.968 **QA/QC Disclosed** Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Why it applies: qaqc\_disclosed is true **Cut-off Undisclosed** Polarity: negative Definition: High-grade interval reported without stating the cut-off grade used for compositing. Why it applies: no cutoff\_grade was stated **Nearology Play** Polarity: neutral Definition: Value premise rests on proximity to a known deposit rather than own results. Why it applies: proximity is offered as the value premise: "- 1.4m of 9 g/t Ag, \*\*0.49% Cu\*\* - Four rigs continue to drill at Ballywire, with a fifth rig drilling at the Company's" ### 26-3552-58 [Link to this fact](https://atlas-staging.minestarters.com/news/group-eleven-intersects-24m-of-mineralization-including-6-3m-of-7-9-zn-pb-and-14--40fd1b68-bb38-4bb8-9303-861389f4e9e5#fact-drill-facts-94) Ballywire · lead #### Identity - Hole ID: 26-3552-58 - Project: Ballywire - Commodity: lead - Region: ireland - Reported Region: ireland - Ticker: ZNG.V #### Geometry - Grade: 0.16 - Grade Unit: % - Intercept: 3.71 m - True Width: 2.968 m - From: 295.54 m - To: 299.25 m - Intercept Depth: 292.54 m #### Classification - Program: exploration - Sample Type: drill - Group ID: 26-3552-58:295.54-299.25 #### QA/QC - Laboratory: ALS Laboratories - QA/QC Disclosed: Yes - Lab Certified: Yes - QP Signed: Yes - QA/QC Methods: standards, blanks #### Review - Needs Review: No - Interp. Status: scored - Historical: No #### Dates - Event date: 2026-10-14T00:00:00.000Z Reasoning: This moderate lead grade over a good width indicates a slightly higher-grade zone within the broader low-grade mineralization. - Positive factor: Moderate lead grade over a good width - Positive factor: True width estimated at 80% of downhole length Evidence · table > 0.16 Context: 3.71 #### Tags used in scoring **True Width Disclosed** Polarity: positive Definition: Actual thickness perpendicular to structure is stated, not just downhole length. Why it applies: true\_width\_m is 2.968 **QA/QC Disclosed** Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Why it applies: qaqc\_disclosed is true **Cut-off Undisclosed** Polarity: negative Definition: High-grade interval reported without stating the cut-off grade used for compositing. Why it applies: no cutoff\_grade was stated **Nearology Play** Polarity: neutral Definition: Value premise rests on proximity to a known deposit rather than own results. Why it applies: proximity is offered as the value premise: "- 1.4m of 9 g/t Ag, \*\*0.49% Cu\*\* - Four rigs continue to drill at Ballywire, with a fifth rig drilling at the Company's" ### 26-3552-58 [Link to this fact](https://atlas-staging.minestarters.com/news/group-eleven-intersects-24m-of-mineralization-including-6-3m-of-7-9-zn-pb-and-14--40fd1b68-bb38-4bb8-9303-861389f4e9e5#fact-drill-facts-95) Ballywire · silver #### Identity - Hole ID: 26-3552-58 - Project: Ballywire - Commodity: silver - Region: ireland - Reported Region: ireland - Ticker: ZNG.V #### Geometry - Grade: 2 - Grade Unit: g/t - Intercept: 3.71 m - True Width: 2.968 m - From: 295.54 m - To: 299.25 m - Intercept Depth: 292.54 m #### Classification - Program: exploration - Sample Type: drill - Group ID: 26-3552-58:295.54-299.25 #### QA/QC - Laboratory: ALS Laboratories - QA/QC Disclosed: Yes - Lab Certified: Yes - QP Signed: Yes - QA/QC Methods: standards, blanks #### Review - Needs Review: No - Interp. Status: scored - Historical: No #### Dates - Event date: 2026-10-14T00:00:00.000Z Reasoning: This moderate silver grade over a good width indicates a slightly higher-grade zone within the broader low-grade mineralization. - Positive factor: Moderate silver grade over a good width - Positive factor: True width estimated at 80% of downhole length Evidence · table > 2.0 Context: 3.71 #### Tags used in scoring **True Width Disclosed** Polarity: positive Definition: Actual thickness perpendicular to structure is stated, not just downhole length. Why it applies: true\_width\_m is 2.968 **QA/QC Disclosed** Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Why it applies: qaqc\_disclosed is true **Cut-off Undisclosed** Polarity: negative Definition: High-grade interval reported without stating the cut-off grade used for compositing. Why it applies: no cutoff\_grade was stated **Nearology Play** Polarity: neutral Definition: Value premise rests on proximity to a known deposit rather than own results. Why it applies: proximity is offered as the value premise: "- 1.4m of 9 g/t Ag, \*\*0.49% Cu\*\* - Four rigs continue to drill at Ballywire, with a fifth rig drilling at the Company's" ### 26-3552-58 [Link to this fact](https://atlas-staging.minestarters.com/news/group-eleven-intersects-24m-of-mineralization-including-6-3m-of-7-9-zn-pb-and-14--40fd1b68-bb38-4bb8-9303-861389f4e9e5#fact-drill-facts-96) Ballywire · zinc #### Identity - Hole ID: 26-3552-58 - Project: Ballywire - Commodity: zinc - Region: ireland - Reported Region: ireland - Ticker: ZNG.V #### Geometry - Grade: 0.02 - Grade Unit: % - Intercept: 4.13 m - True Width: 3.304 m - From: 550.53 m - To: 554.66 m - Intercept Depth: 550.53 m #### Classification - Program: exploration - Sample Type: drill - Group ID: 26-3552-58:550.53-554.66 #### QA/QC - Laboratory: ALS Laboratories - QA/QC Disclosed: Yes - Lab Certified: Yes - QP Signed: Yes - QA/QC Methods: standards, blanks #### Review - Needs Review: No - Interp. Status: scored - Historical: No #### Dates - Event date: 2026-10-14T00:00:00.000Z Reasoning: While the zinc grade is very low, this intercept indicates a zone of copper-silver mineralization at depth. - Positive factor: Good intercept length for deeper mineralization - Positive factor: True width estimated at 80% of downhole length - Negative factor: Very low zinc grade Evidence · table > 0.02 Context: 4.13 #### Tags used in scoring **True Width Disclosed** Polarity: positive Definition: Actual thickness perpendicular to structure is stated, not just downhole length. Why it applies: true\_width\_m is 3.304 **QA/QC Disclosed** Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Why it applies: qaqc\_disclosed is true **Cut-off Undisclosed** Polarity: negative Definition: High-grade interval reported without stating the cut-off grade used for compositing. Why it applies: no cutoff\_grade was stated **Nearology Play** Polarity: neutral Definition: Value premise rests on proximity to a known deposit rather than own results. Why it applies: proximity is offered as the value premise: "- 1.4m of 9 g/t Ag, \*\*0.49% Cu\*\* - Four rigs continue to drill at Ballywire, with a fifth rig drilling at the Company's" ### 26-3552-58 [Link to this fact](https://atlas-staging.minestarters.com/news/group-eleven-intersects-24m-of-mineralization-including-6-3m-of-7-9-zn-pb-and-14--40fd1b68-bb38-4bb8-9303-861389f4e9e5#fact-drill-facts-97) Ballywire · lead #### Identity - Hole ID: 26-3552-58 - Project: Ballywire - Commodity: lead - Region: ireland - Reported Region: ireland - Ticker: ZNG.V #### Geometry - Grade: 0.01 - Grade Unit: % - Intercept: 4.13 m - True Width: 3.304 m - From: 550.53 m - To: 554.66 m - Intercept Depth: 550.53 m #### Classification - Program: exploration - Sample Type: drill - Group ID: 26-3552-58:550.53-554.66 #### QA/QC - Laboratory: ALS Laboratories - QA/QC Disclosed: Yes - Lab Certified: Yes - QP Signed: Yes - QA/QC Methods: standards, blanks #### Review - Needs Review: No - Interp. Status: scored - Historical: No #### Dates - Event date: 2026-10-14T00:00:00.000Z Reasoning: While the lead grade is very low, this intercept indicates a zone of copper-silver mineralization at depth. - Positive factor: Good intercept length for deeper mineralization - Positive factor: True width estimated at 80% of downhole length - Negative factor: Very low lead grade Evidence · table > 0.01 Context: 4.13 #### Tags used in scoring **True Width Disclosed** Polarity: positive Definition: Actual thickness perpendicular to structure is stated, not just downhole length. Why it applies: true\_width\_m is 3.304 **QA/QC Disclosed** Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Why it applies: qaqc\_disclosed is true **Cut-off Undisclosed** Polarity: negative Definition: High-grade interval reported without stating the cut-off grade used for compositing. Why it applies: no cutoff\_grade was stated **Nearology Play** Polarity: neutral Definition: Value premise rests on proximity to a known deposit rather than own results. Why it applies: proximity is offered as the value premise: "- 1.4m of 9 g/t Ag, \*\*0.49% Cu\*\* - Four rigs continue to drill at Ballywire, with a fifth rig drilling at the Company's" ### 26-3552-58 [Link to this fact](https://atlas-staging.minestarters.com/news/group-eleven-intersects-24m-of-mineralization-including-6-3m-of-7-9-zn-pb-and-14--40fd1b68-bb38-4bb8-9303-861389f4e9e5#fact-drill-facts-98) Ballywire · silver #### Identity - Hole ID: 26-3552-58 - Project: Ballywire - Commodity: silver - Region: ireland - Reported Region: ireland - Ticker: ZNG.V #### Geometry - Grade: 7.1 - Grade Unit: g/t - Intercept: 4.13 m - True Width: 3.304 m - From: 550.53 m - To: 554.66 m - Intercept Depth: 550.53 m #### Classification - Program: exploration - Sample Type: drill - Group ID: 26-3552-58:550.53-554.66 #### QA/QC - Laboratory: ALS Laboratories - QA/QC Disclosed: Yes - Lab Certified: Yes - QP Signed: Yes - QA/QC Methods: standards, blanks #### Review - Needs Review: No - Interp. Status: scored - Historical: No #### Dates - Event date: 2026-10-14T00:00:00.000Z Reasoning: This moderate silver grade over a good width contributes to the polymetallic nature of the deeper mineralization. - Positive factor: Moderate silver grade over a good width for deeper mineralization - Positive factor: True width estimated at 80% of downhole length Evidence · table > 7.1 Context: 4.13 #### Tags used in scoring **True Width Disclosed** Polarity: positive Definition: Actual thickness perpendicular to structure is stated, not just downhole length. Why it applies: true\_width\_m is 3.304 **QA/QC Disclosed** Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Why it applies: qaqc\_disclosed is true **Cut-off Undisclosed** Polarity: negative Definition: High-grade interval reported without stating the cut-off grade used for compositing. Why it applies: no cutoff\_grade was stated **Nearology Play** Polarity: neutral Definition: Value premise rests on proximity to a known deposit rather than own results. Why it applies: proximity is offered as the value premise: "- 1.4m of 9 g/t Ag, \*\*0.49% Cu\*\* - Four rigs continue to drill at Ballywire, with a fifth rig drilling at the Company's" ### 26-3552-58 [Link to this fact](https://atlas-staging.minestarters.com/news/group-eleven-intersects-24m-of-mineralization-including-6-3m-of-7-9-zn-pb-and-14--40fd1b68-bb38-4bb8-9303-861389f4e9e5#fact-drill-facts-99) Ballywire · copper #### Identity - Hole ID: 26-3552-58 - Project: Ballywire - Commodity: copper - Region: ireland - Reported Region: ireland - Ticker: ZNG.V #### Geometry - Grade: 0.37 - Grade Unit: % - Intercept: 4.13 m - True Width: 3.304 m - From: 550.53 m - To: 554.66 m - Intercept Depth: 550.53 m #### Classification - Program: exploration - Sample Type: drill - Group ID: 26-3552-58:550.53-554.66 #### QA/QC - Laboratory: ALS Laboratories - QA/QC Disclosed: Yes - Lab Certified: Yes - QP Signed: Yes - QA/QC Methods: standards, blanks #### Review - Needs Review: No - Interp. Status: scored - Historical: No #### Dates - Event date: 2026-10-14T00:00:00.000Z Reasoning: This high-grade copper intercept significantly enhances the polymetallic nature of the deeper mineralization, indicating a valuable zone. - Positive factor: High-grade copper over a good width for deeper mineralization - Positive factor: True width estimated at 80% of downhole length Evidence · table > 0.37 Context: 4.13 #### Tags used in scoring **True Width Disclosed** Polarity: positive Definition: Actual thickness perpendicular to structure is stated, not just downhole length. Why it applies: true\_width\_m is 3.304 **QA/QC Disclosed** Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Why it applies: qaqc\_disclosed is true **Cut-off Undisclosed** Polarity: negative Definition: High-grade interval reported without stating the cut-off grade used for compositing. Why it applies: no cutoff\_grade was stated **Nearology Play** Polarity: neutral Definition: Value premise rests on proximity to a known deposit rather than own results. Why it applies: proximity is offered as the value premise: "- 1.4m of 9 g/t Ag, \*\*0.49% Cu\*\* - Four rigs continue to drill at Ballywire, with a fifth rig drilling at the Company's" ### 26-3552-58 [Link to this fact](https://atlas-staging.minestarters.com/news/group-eleven-intersects-24m-of-mineralization-including-6-3m-of-7-9-zn-pb-and-14--40fd1b68-bb38-4bb8-9303-861389f4e9e5#fact-drill-facts-100) Ballywire · antimony #### Identity - Hole ID: 26-3552-58 - Project: Ballywire - Commodity: antimony - Region: ireland - Reported Region: ireland - Ticker: ZNG.V #### Geometry - Grade: 0.02 - Grade Unit: % - Intercept: 4.13 m - True Width: 3.304 m - From: 550.53 m - To: 554.66 m - Intercept Depth: 550.53 m #### Classification - Program: exploration - Sample Type: drill - Group ID: 26-3552-58:550.53-554.66 #### QA/QC - Laboratory: ALS Laboratories - QA/QC Disclosed: Yes - Lab Certified: Yes - QP Signed: Yes - QA/QC Methods: standards, blanks #### Review - Needs Review: No - Interp. Status: scored - Historical: No #### Dates - Event date: 2026-10-14T00:00:00.000Z Reasoning: The presence of antimony, even at a low grade, contributes to the polymetallic nature of the deeper mineralization. - Positive factor: Presence of antimony, indicating polymetallic mineralization - Positive factor: True width estimated at 80% of downhole length - Negative factor: Low antimony grade Evidence · table > 0.02 Context: 4.13 #### Tags used in scoring **True Width Disclosed** Polarity: positive Definition: Actual thickness perpendicular to structure is stated, not just downhole length. Why it applies: true\_width\_m is 3.304 **QA/QC Disclosed** Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Why it applies: qaqc\_disclosed is true **Cut-off Undisclosed** Polarity: negative Definition: High-grade interval reported without stating the cut-off grade used for compositing. Why it applies: no cutoff\_grade was stated **Nearology Play** Polarity: neutral Definition: Value premise rests on proximity to a known deposit rather than own results. Why it applies: proximity is offered as the value premise: "- 1.4m of 9 g/t Ag, \*\*0.49% Cu\*\* - Four rigs continue to drill at Ballywire, with a fifth rig drilling at the Company's" ### 26-3552-58 [Link to this fact](https://atlas-staging.minestarters.com/news/group-eleven-intersects-24m-of-mineralization-including-6-3m-of-7-9-zn-pb-and-14--40fd1b68-bb38-4bb8-9303-861389f4e9e5#fact-drill-facts-101) Ballywire · zinc #### Identity - Hole ID: 26-3552-58 - Project: Ballywire - Commodity: zinc - Region: ireland - Reported Region: ireland - Ticker: ZNG.V #### Geometry - Grade: 0.04 - Grade Unit: % - Intercept: 1.39 m - True Width: 1.112 m - From: 550.53 m - To: 551.92 m - Intercept Depth: 550.53 m #### Classification - Program: exploration - Sample Type: drill - Group ID: 26-3552-58:550.53-551.92 #### QA/QC - Laboratory: ALS Laboratories - QA/QC Disclosed: Yes - Lab Certified: Yes - QP Signed: Yes - QA/QC Methods: standards, blanks #### Review - Needs Review: No - Interp. Status: scored - Historical: No #### Dates - Event date: 2026-10-14T00:00:00.000Z Reasoning: While the zinc grade is very low, this narrow intercept shows a higher-grade copper-silver zone within the deeper mineralization. - Positive factor: True width estimated at 80% of downhole length - Negative factor: Very low zinc grade - Negative factor: Narrow intercept Evidence · table > 0.04 Context: 1.39 #### Tags used in scoring **True Width Disclosed** Polarity: positive Definition: Actual thickness perpendicular to structure is stated, not just downhole length. Why it applies: true\_width\_m is 1.112 **QA/QC Disclosed** Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Why it applies: qaqc\_disclosed is true **Cut-off Undisclosed** Polarity: negative Definition: High-grade interval reported without stating the cut-off grade used for compositing. Why it applies: no cutoff\_grade was stated **Nearology Play** Polarity: neutral Definition: Value premise rests on proximity to a known deposit rather than own results. Why it applies: proximity is offered as the value premise: "- 1.4m of 9 g/t Ag, \*\*0.49% Cu\*\* - Four rigs continue to drill at Ballywire, with a fifth rig drilling at the Company's" ### 26-3552-58 [Link to this fact](https://atlas-staging.minestarters.com/news/group-eleven-intersects-24m-of-mineralization-including-6-3m-of-7-9-zn-pb-and-14--40fd1b68-bb38-4bb8-9303-861389f4e9e5#fact-drill-facts-102) Ballywire · lead #### Identity - Hole ID: 26-3552-58 - Project: Ballywire - Commodity: lead - Region: ireland - Reported Region: ireland - Ticker: ZNG.V #### Geometry - Grade: 0.01 - Grade Unit: % - Intercept: 1.39 m - True Width: 1.112 m - From: 550.53 m - To: 551.92 m - Intercept Depth: 550.53 m #### Classification - Program: exploration - Sample Type: drill - Group ID: 26-3552-58:550.53-551.92 #### QA/QC - Laboratory: ALS Laboratories - QA/QC Disclosed: Yes - Lab Certified: Yes - QP Signed: Yes - QA/QC Methods: standards, blanks #### Review - Needs Review: No - Interp. Status: scored - Historical: No #### Dates - Event date: 2026-10-14T00:00:00.000Z Reasoning: While the lead grade is very low, this narrow intercept shows a higher-grade copper-silver zone within the deeper mineralization. - Positive factor: True width estimated at 80% of downhole length - Negative factor: Very low lead grade - Negative factor: Narrow intercept Evidence · table > 0.01 Context: 1.39 #### Tags used in scoring **True Width Disclosed** Polarity: positive Definition: Actual thickness perpendicular to structure is stated, not just downhole length. Why it applies: true\_width\_m is 1.112 **QA/QC Disclosed** Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Why it applies: qaqc\_disclosed is true **Cut-off Undisclosed** Polarity: negative Definition: High-grade interval reported without stating the cut-off grade used for compositing. Why it applies: no cutoff\_grade was stated **Nearology Play** Polarity: neutral Definition: Value premise rests on proximity to a known deposit rather than own results. Why it applies: proximity is offered as the value premise: "- 1.4m of 9 g/t Ag, \*\*0.49% Cu\*\* - Four rigs continue to drill at Ballywire, with a fifth rig drilling at the Company's" ### 26-3552-58 [Link to this fact](https://atlas-staging.minestarters.com/news/group-eleven-intersects-24m-of-mineralization-including-6-3m-of-7-9-zn-pb-and-14--40fd1b68-bb38-4bb8-9303-861389f4e9e5#fact-drill-facts-103) Ballywire · silver #### Identity - Hole ID: 26-3552-58 - Project: Ballywire - Commodity: silver - Region: ireland - Reported Region: ireland - Ticker: ZNG.V #### Geometry - Grade: 9.2 - Grade Unit: g/t - Intercept: 1.39 m - True Width: 1.112 m - From: 550.53 m - To: 551.92 m - Intercept Depth: 550.53 m #### Classification - Program: exploration - Sample Type: drill - Group ID: 26-3552-58:550.53-551.92 #### QA/QC - Laboratory: ALS Laboratories - QA/QC Disclosed: Yes - Lab Certified: Yes - QP Signed: Yes - QA/QC Methods: standards, blanks #### Review - Needs Review: No - Interp. Status: scored - Historical: No #### Dates - Event date: 2026-10-14T00:00:00.000Z Reasoning: This good silver grade over a narrow but significant width further enhances the polymetallic nature of the deeper mineralization, indicating a valuable, concentrated zone. - Positive factor: Good silver grade over a narrow but significant interval for deeper mineralization - Positive factor: True width estimated at 80% of downhole length Evidence · table > 9.2 Context: 1.39 #### Tags used in scoring **True Width Disclosed** Polarity: positive Definition: Actual thickness perpendicular to structure is stated, not just downhole length. Why it applies: true\_width\_m is 1.112 **QA/QC Disclosed** Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Why it applies: qaqc\_disclosed is true **Cut-off Undisclosed** Polarity: negative Definition: High-grade interval reported without stating the cut-off grade used for compositing. Why it applies: no cutoff\_grade was stated **Nearology Play** Polarity: neutral Definition: Value premise rests on proximity to a known deposit rather than own results. Why it applies: proximity is offered as the value premise: "- 1.4m of 9 g/t Ag, \*\*0.49% Cu\*\* - Four rigs continue to drill at Ballywire, with a fifth rig drilling at the Company's" ### 26-3552-58 [Link to this fact](https://atlas-staging.minestarters.com/news/group-eleven-intersects-24m-of-mineralization-including-6-3m-of-7-9-zn-pb-and-14--40fd1b68-bb38-4bb8-9303-861389f4e9e5#fact-drill-facts-104) Ballywire · copper #### Identity - Hole ID: 26-3552-58 - Project: Ballywire - Commodity: copper - Region: ireland - Reported Region: ireland - Ticker: ZNG.V #### Geometry - Grade: 0.49 - Grade Unit: % - Intercept: 1.39 m - True Width: 1.112 m - From: 550.53 m - To: 551.92 m - Intercept Depth: 550.53 m #### Classification - Program: exploration - Sample Type: drill - Group ID: 26-3552-58:550.53-551.92 #### QA/QC - Laboratory: ALS Laboratories - QA/QC Disclosed: Yes - Lab Certified: Yes - QP Signed: Yes - QA/QC Methods: standards, blanks #### Review - Needs Review: No - Interp. Status: scored - Historical: No #### Dates - Event date: 2026-10-14T00:00:00.000Z Reasoning: This very high-grade copper intercept further enhances the polymetallic nature of the deeper mineralization, indicating a valuable, concentrated zone. - Positive factor: Very high-grade copper over a narrow but significant interval for deeper mineralization - Positive factor: True width estimated at 80% of downhole length Evidence · table > 0.49 Context: 1.39 #### Tags used in scoring **True Width Disclosed** Polarity: positive Definition: Actual thickness perpendicular to structure is stated, not just downhole length. Why it applies: true\_width\_m is 1.112 **QA/QC Disclosed** Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Why it applies: qaqc\_disclosed is true **Cut-off Undisclosed** Polarity: negative Definition: High-grade interval reported without stating the cut-off grade used for compositing. Why it applies: no cutoff\_grade was stated **Nearology Play** Polarity: neutral Definition: Value premise rests on proximity to a known deposit rather than own results. Why it applies: proximity is offered as the value premise: "- 1.4m of 9 g/t Ag, \*\*0.49% Cu\*\* - Four rigs continue to drill at Ballywire, with a fifth rig drilling at the Company's" ### 26-3552-58 [Link to this fact](https://atlas-staging.minestarters.com/news/group-eleven-intersects-24m-of-mineralization-including-6-3m-of-7-9-zn-pb-and-14--40fd1b68-bb38-4bb8-9303-861389f4e9e5#fact-drill-facts-105) Ballywire · antimony #### Identity - Hole ID: 26-3552-58 - Project: Ballywire - Commodity: antimony - Region: ireland - Reported Region: ireland - Ticker: ZNG.V #### Geometry - Grade: 0.04 - Grade Unit: % - Intercept: 1.39 m - True Width: 1.112 m - From: 550.53 m - To: 551.92 m - Intercept Depth: 550.53 m #### Classification - Program: exploration - Sample Type: drill - Group ID: 26-3552-58:550.53-551.92 #### QA/QC - Laboratory: ALS Laboratories - QA/QC Disclosed: Yes - Lab Certified: Yes - QP Signed: Yes - QA/QC Methods: standards, blanks #### Review - Needs Review: No - Interp. Status: scored - Historical: No #### Dates - Event date: 2026-10-14T00:00:00.000Z Reasoning: The presence of antimony, even at a low grade, contributes to the polymetallic nature of this very high-grade deeper mineralization. - Positive factor: Presence of antimony, indicating polymetallic mineralization - Positive factor: True width estimated at 80% of downhole length - Negative factor: Low antimony grade Evidence · table > 0.04 Context: 1.39 #### Tags used in scoring **True Width Disclosed** Polarity: positive Definition: Actual thickness perpendicular to structure is stated, not just downhole length. Why it applies: true\_width\_m is 1.112 **QA/QC Disclosed** Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Why it applies: qaqc\_disclosed is true **Cut-off Undisclosed** Polarity: negative Definition: High-grade interval reported without stating the cut-off grade used for compositing. Why it applies: no cutoff\_grade was stated **Nearology Play** Polarity: neutral Definition: Value premise rests on proximity to a known deposit rather than own results. Why it applies: proximity is offered as the value premise: "- 1.4m of 9 g/t Ag, \*\*0.49% Cu\*\* - Four rigs continue to drill at Ballywire, with a fifth rig drilling at the Company's" ### 26-3552-59 [Link to this fact](https://atlas-staging.minestarters.com/news/group-eleven-intersects-24m-of-mineralization-including-6-3m-of-7-9-zn-pb-and-14--40fd1b68-bb38-4bb8-9303-861389f4e9e5#fact-drill-facts-106) Ballywire · zinc #### Identity - Hole ID: 26-3552-59 - Project: Ballywire - Commodity: zinc - Region: ireland - Reported Region: ireland - Ticker: ZNG.V #### Geometry - Grade: 0.03 - Grade Unit: % - Intercept: 28.73 m - True Width: 25.857 m - From: 168.93 m - To: 197.66 m - Intercept Depth: 168.93 m #### Classification - Program: exploration - Sample Type: drill - Group ID: 26-3552-59:168.93-197.66 #### QA/QC - Laboratory: ALS Laboratories - QA/QC Disclosed: Yes - Lab Certified: Yes - QP Signed: Yes - QA/QC Methods: standards, blanks #### Review - Needs Review: No - Interp. Status: scored - Historical: No #### Dates - Event date: 2026-10-14T00:00:00.000Z Reasoning: This broad intercept, while low-grade, provides early evidence of a potential parallel zone of mineralization. - Positive factor: Broad intercept length, indicating widespread mineralization - Positive factor: True width estimated at 90% of downhole length - Negative factor: Very low zinc grade Evidence · table > 0.03 Context: 28.73 #### Tags used in scoring **True Width Disclosed** Polarity: positive Definition: Actual thickness perpendicular to structure is stated, not just downhole length. Why it applies: true\_width\_m is 25.857 **QA/QC Disclosed** Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Why it applies: qaqc\_disclosed is true **Cut-off Undisclosed** Polarity: negative Definition: High-grade interval reported without stating the cut-off grade used for compositing. Why it applies: no cutoff\_grade was stated **Nearology Play** Polarity: neutral Definition: Value premise rests on proximity to a known deposit rather than own results. Why it applies: proximity is offered as the value premise: "- 1.4m of 9 g/t Ag, \*\*0.49% Cu\*\* - Four rigs continue to drill at Ballywire, with a fifth rig drilling at the Company's" ### 26-3552-59 [Link to this fact](https://atlas-staging.minestarters.com/news/group-eleven-intersects-24m-of-mineralization-including-6-3m-of-7-9-zn-pb-and-14--40fd1b68-bb38-4bb8-9303-861389f4e9e5#fact-drill-facts-107) Ballywire · lead #### Identity - Hole ID: 26-3552-59 - Project: Ballywire - Commodity: lead - Region: ireland - Reported Region: ireland - Ticker: ZNG.V #### Geometry - Grade: 0.06 - Grade Unit: % - Intercept: 28.73 m - True Width: 25.857 m - From: 168.93 m - To: 197.66 m - Intercept Depth: 168.93 m #### Classification - Program: exploration - Sample Type: drill - Group ID: 26-3552-59:168.93-197.66 #### QA/QC - Laboratory: ALS Laboratories - QA/QC Disclosed: Yes - Lab Certified: Yes - QP Signed: Yes - QA/QC Methods: standards, blanks #### Review - Needs Review: No - Interp. Status: scored - Historical: No #### Dates - Event date: 2026-10-14T00:00:00.000Z Reasoning: This broad intercept, while low-grade, provides early evidence of a potential parallel zone of mineralization. - Positive factor: Broad intercept length, indicating widespread mineralization - Positive factor: True width estimated at 90% of downhole length - Negative factor: Very low lead grade Evidence · table > 0.06 Context: 28.73 #### Tags used in scoring **True Width Disclosed** Polarity: positive Definition: Actual thickness perpendicular to structure is stated, not just downhole length. Why it applies: true\_width\_m is 25.857 **QA/QC Disclosed** Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Why it applies: qaqc\_disclosed is true **Cut-off Undisclosed** Polarity: negative Definition: High-grade interval reported without stating the cut-off grade used for compositing. Why it applies: no cutoff\_grade was stated **Nearology Play** Polarity: neutral Definition: Value premise rests on proximity to a known deposit rather than own results. Why it applies: proximity is offered as the value premise: "- 1.4m of 9 g/t Ag, \*\*0.49% Cu\*\* - Four rigs continue to drill at Ballywire, with a fifth rig drilling at the Company's" ### 26-3552-59 [Link to this fact](https://atlas-staging.minestarters.com/news/group-eleven-intersects-24m-of-mineralization-including-6-3m-of-7-9-zn-pb-and-14--40fd1b68-bb38-4bb8-9303-861389f4e9e5#fact-drill-facts-108) Ballywire · silver #### Identity - Hole ID: 26-3552-59 - Project: Ballywire - Commodity: silver - Region: ireland - Reported Region: ireland - Ticker: ZNG.V #### Geometry - Grade: 0.3 - Grade Unit: g/t - Intercept: 28.73 m - True Width: 25.857 m - From: 168.93 m - To: 197.66 m - Intercept Depth: 168.93 m #### Classification - Program: exploration - Sample Type: drill - Group ID: 26-3552-59:168.93-197.66 #### QA/QC - Laboratory: ALS Laboratories - QA/QC Disclosed: Yes - Lab Certified: Yes - QP Signed: Yes - QA/QC Methods: standards, blanks #### Review - Needs Review: No - Interp. Status: scored - Historical: No #### Dates - Event date: 2026-10-14T00:00:00.000Z Reasoning: This broad intercept, while low-grade, provides early evidence of a potential parallel zone of mineralization. - Positive factor: Broad intercept length, indicating widespread mineralization - Positive factor: True width estimated at 90% of downhole length - Negative factor: Very low silver grade Evidence · table > 0.3 Context: 28.73 #### Tags used in scoring **True Width Disclosed** Polarity: positive Definition: Actual thickness perpendicular to structure is stated, not just downhole length. Why it applies: true\_width\_m is 25.857 **QA/QC Disclosed** Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Why it applies: qaqc\_disclosed is true **Cut-off Undisclosed** Polarity: negative Definition: High-grade interval reported without stating the cut-off grade used for compositing. Why it applies: no cutoff\_grade was stated **Nearology Play** Polarity: neutral Definition: Value premise rests on proximity to a known deposit rather than own results. Why it applies: proximity is offered as the value premise: "- 1.4m of 9 g/t Ag, \*\*0.49% Cu\*\* - Four rigs continue to drill at Ballywire, with a fifth rig drilling at the Company's" ### 26-3552-59 [Link to this fact](https://atlas-staging.minestarters.com/news/group-eleven-intersects-24m-of-mineralization-including-6-3m-of-7-9-zn-pb-and-14--40fd1b68-bb38-4bb8-9303-861389f4e9e5#fact-drill-facts-109) Ballywire · zinc #### Identity - Hole ID: 26-3552-59 - Project: Ballywire - Commodity: zinc - Region: ireland - Reported Region: ireland - Ticker: ZNG.V #### Geometry - Grade: 0.29 - Grade Unit: % - Intercept: 0.96 m - True Width: 0.864 m - From: 169.78 m - To: 170.74 m - Intercept Depth: 168.93 m #### Classification - Program: exploration - Sample Type: drill - Group ID: 26-3552-59:169.78-170.74 #### QA/QC - Laboratory: ALS Laboratories - QA/QC Disclosed: Yes - Lab Certified: Yes - QP Signed: Yes - QA/QC Methods: standards, blanks #### Review - Needs Review: No - Interp. Status: scored - Historical: No #### Dates - Event date: 2026-10-14T00:00:00.000Z Reasoning: This moderate zinc grade in a narrow intercept indicates a slightly higher-grade zone within the potential parallel mineralization. - Positive factor: Moderate zinc grade in a narrow intercept - Positive factor: True width estimated at 90% of downhole length - Negative factor: Narrow intercept Evidence · table > 0.29 Context: 0.96 #### Tags used in scoring **True Width Disclosed** Polarity: positive Definition: Actual thickness perpendicular to structure is stated, not just downhole length. Why it applies: true\_width\_m is 0.864 **QA/QC Disclosed** Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Why it applies: qaqc\_disclosed is true **Cut-off Undisclosed** Polarity: negative Definition: High-grade interval reported without stating the cut-off grade used for compositing. Why it applies: no cutoff\_grade was stated **Nearology Play** Polarity: neutral Definition: Value premise rests on proximity to a known deposit rather than own results. Why it applies: proximity is offered as the value premise: "- 1.4m of 9 g/t Ag, \*\*0.49% Cu\*\* - Four rigs continue to drill at Ballywire, with a fifth rig drilling at the Company's" ### 26-3552-59 [Link to this fact](https://atlas-staging.minestarters.com/news/group-eleven-intersects-24m-of-mineralization-including-6-3m-of-7-9-zn-pb-and-14--40fd1b68-bb38-4bb8-9303-861389f4e9e5#fact-drill-facts-110) Ballywire · lead #### Identity - Hole ID: 26-3552-59 - Project: Ballywire - Commodity: lead - Region: ireland - Reported Region: ireland - Ticker: ZNG.V #### Geometry - Grade: 0.26 - Grade Unit: % - Intercept: 0.96 m - True Width: 0.864 m - From: 169.78 m - To: 170.74 m - Intercept Depth: 168.93 m #### Classification - Program: exploration - Sample Type: drill - Group ID: 26-3552-59:169.78-170.74 #### QA/QC - Laboratory: ALS Laboratories - QA/QC Disclosed: Yes - Lab Certified: Yes - QP Signed: Yes - QA/QC Methods: standards, blanks #### Review - Needs Review: No - Interp. Status: scored - Historical: No #### Dates - Event date: 2026-10-14T00:00:00.000Z Reasoning: This moderate lead grade in a narrow intercept indicates a slightly higher-grade zone within the potential parallel mineralization. - Positive factor: Moderate lead grade in a narrow intercept - Positive factor: True width estimated at 90% of downhole length - Negative factor: Narrow intercept Evidence · table > 0.26 Context: 0.96 #### Tags used in scoring **True Width Disclosed** Polarity: positive Definition: Actual thickness perpendicular to structure is stated, not just downhole length. Why it applies: true\_width\_m is 0.864 **QA/QC Disclosed** Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Why it applies: qaqc\_disclosed is true **Cut-off Undisclosed** Polarity: negative Definition: High-grade interval reported without stating the cut-off grade used for compositing. Why it applies: no cutoff\_grade was stated **Nearology Play** Polarity: neutral Definition: Value premise rests on proximity to a known deposit rather than own results. Why it applies: proximity is offered as the value premise: "- 1.4m of 9 g/t Ag, \*\*0.49% Cu\*\* - Four rigs continue to drill at Ballywire, with a fifth rig drilling at the Company's" ### 26-3552-59 [Link to this fact](https://atlas-staging.minestarters.com/news/group-eleven-intersects-24m-of-mineralization-including-6-3m-of-7-9-zn-pb-and-14--40fd1b68-bb38-4bb8-9303-861389f4e9e5#fact-drill-facts-111) Ballywire · silver #### Identity - Hole ID: 26-3552-59 - Project: Ballywire - Commodity: silver - Region: ireland - Reported Region: ireland - Ticker: ZNG.V #### Geometry - Grade: 1.1 - Grade Unit: g/t - Intercept: 0.96 m - True Width: 0.864 m - From: 169.78 m - To: 170.74 m - Intercept Depth: 168.93 m #### Classification - Program: exploration - Sample Type: drill - Group ID: 26-3552-59:169.78-170.74 #### QA/QC - Laboratory: ALS Laboratories - QA/QC Disclosed: Yes - Lab Certified: Yes - QP Signed: Yes - QA/QC Methods: standards, blanks #### Review - Needs Review: No - Interp. Status: scored - Historical: No #### Dates - Event date: 2026-10-14T00:00:00.000Z Reasoning: This moderate silver grade in a narrow intercept indicates a slightly higher-grade zone within the potential parallel mineralization. - Positive factor: Moderate silver grade in a narrow intercept - Positive factor: True width estimated at 90% of downhole length - Negative factor: Narrow intercept Evidence · table > 1.1 Context: 0.96 #### Tags used in scoring **True Width Disclosed** Polarity: positive Definition: Actual thickness perpendicular to structure is stated, not just downhole length. Why it applies: true\_width\_m is 0.864 **QA/QC Disclosed** Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Why it applies: qaqc\_disclosed is true **Cut-off Undisclosed** Polarity: negative Definition: High-grade interval reported without stating the cut-off grade used for compositing. Why it applies: no cutoff\_grade was stated **Nearology Play** Polarity: neutral Definition: Value premise rests on proximity to a known deposit rather than own results. Why it applies: proximity is offered as the value premise: "- 1.4m of 9 g/t Ag, \*\*0.49% Cu\*\* - Four rigs continue to drill at Ballywire, with a fifth rig drilling at the Company's" ### 26-3552-59 [Link to this fact](https://atlas-staging.minestarters.com/news/group-eleven-intersects-24m-of-mineralization-including-6-3m-of-7-9-zn-pb-and-14--40fd1b68-bb38-4bb8-9303-861389f4e9e5#fact-drill-facts-112) Ballywire · zinc #### Identity - Hole ID: 26-3552-59 - Project: Ballywire - Commodity: zinc - Region: ireland - Reported Region: ireland - Ticker: ZNG.V #### Geometry - Grade: 0.01 - Grade Unit: % - Intercept: 4.62 m - True Width: 4.158 m - From: 193.04 m - To: 197.66 m - Intercept Depth: 193.04 m #### Classification - Program: exploration - Sample Type: drill - Group ID: 26-3552-59:193.04-197.66 #### QA/QC - Laboratory: ALS Laboratories - QA/QC Disclosed: Yes - Lab Certified: Yes - QP Signed: Yes - QA/QC Methods: standards, blanks #### Review - Needs Review: No - Interp. Status: scored - Historical: No #### Dates - Event date: 2026-10-14T00:00:00.000Z Reasoning: This intercept, while low-grade, further supports the presence of a potential parallel zone of mineralization. - Positive factor: Good intercept length for potential parallel zone - Positive factor: True width estimated at 90% of downhole length - Negative factor: Very low zinc grade Evidence · table > 0.01 Context: 4.62 #### Tags used in scoring **True Width Disclosed** Polarity: positive Definition: Actual thickness perpendicular to structure is stated, not just downhole length. Why it applies: true\_width\_m is 4.158 **QA/QC Disclosed** Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Why it applies: qaqc\_disclosed is true **Cut-off Undisclosed** Polarity: negative Definition: High-grade interval reported without stating the cut-off grade used for compositing. Why it applies: no cutoff\_grade was stated **Nearology Play** Polarity: neutral Definition: Value premise rests on proximity to a known deposit rather than own results. Why it applies: proximity is offered as the value premise: "- 1.4m of 9 g/t Ag, \*\*0.49% Cu\*\* - Four rigs continue to drill at Ballywire, with a fifth rig drilling at the Company's" ### 26-3552-59 [Link to this fact](https://atlas-staging.minestarters.com/news/group-eleven-intersects-24m-of-mineralization-including-6-3m-of-7-9-zn-pb-and-14--40fd1b68-bb38-4bb8-9303-861389f4e9e5#fact-drill-facts-113) Ballywire · lead #### Identity - Hole ID: 26-3552-59 - Project: Ballywire - Commodity: lead - Region: ireland - Reported Region: ireland - Ticker: ZNG.V #### Geometry - Grade: 0.12 - Grade Unit: % - Intercept: 4.62 m - True Width: 4.158 m - From: 193.04 m - To: 197.66 m - Intercept Depth: 193.04 m #### Classification - Program: exploration - Sample Type: drill - Group ID: 26-3552-59:193.04-197.66 #### QA/QC - Laboratory: ALS Laboratories - QA/QC Disclosed: Yes - Lab Certified: Yes - QP Signed: Yes - QA/QC Methods: standards, blanks #### Review - Needs Review: No - Interp. Status: scored - Historical: No #### Dates - Event date: 2026-10-14T00:00:00.000Z Reasoning: This moderate lead grade over a good width further supports the presence of a potential parallel zone of mineralization. - Positive factor: Moderate lead grade over a good width for potential parallel zone - Positive factor: True width estimated at 90% of downhole length Evidence · table > 0.12 Context: 4.62 #### Tags used in scoring **True Width Disclosed** Polarity: positive Definition: Actual thickness perpendicular to structure is stated, not just downhole length. Why it applies: true\_width\_m is 4.158 **QA/QC Disclosed** Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Why it applies: qaqc\_disclosed is true **Cut-off Undisclosed** Polarity: negative Definition: High-grade interval reported without stating the cut-off grade used for compositing. Why it applies: no cutoff\_grade was stated **Nearology Play** Polarity: neutral Definition: Value premise rests on proximity to a known deposit rather than own results. Why it applies: proximity is offered as the value premise: "- 1.4m of 9 g/t Ag, \*\*0.49% Cu\*\* - Four rigs continue to drill at Ballywire, with a fifth rig drilling at the Company's" ### 26-3552-59 [Link to this fact](https://atlas-staging.minestarters.com/news/group-eleven-intersects-24m-of-mineralization-including-6-3m-of-7-9-zn-pb-and-14--40fd1b68-bb38-4bb8-9303-861389f4e9e5#fact-drill-facts-114) Ballywire · silver #### Identity - Hole ID: 26-3552-59 - Project: Ballywire - Commodity: silver - Region: ireland - Reported Region: ireland - Ticker: ZNG.V #### Geometry - Grade: 0.3 - Grade Unit: g/t - Intercept: 4.62 m - True Width: 4.158 m - From: 193.04 m - To: 197.66 m - Intercept Depth: 193.04 m #### Classification - Program: exploration - Sample Type: drill - Group ID: 26-3552-59:193.04-197.66 #### QA/QC - Laboratory: ALS Laboratories - QA/QC Disclosed: Yes - Lab Certified: Yes - QP Signed: Yes - QA/QC Methods: standards, blanks #### Review - Needs Review: No - Interp. Status: scored - Historical: No #### Dates - Event date: 2026-10-14T00:00:00.000Z Reasoning: This intercept, while low-grade, further supports the presence of a potential parallel zone of mineralization. - Positive factor: Good intercept length for potential parallel zone - Positive factor: True width estimated at 90% of downhole length - Negative factor: Very low silver grade Evidence · table > 0.3 Context: 4.62 #### Tags used in scoring **True Width Disclosed** Polarity: positive Definition: Actual thickness perpendicular to structure is stated, not just downhole length. Why it applies: true\_width\_m is 4.158 **QA/QC Disclosed** Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Why it applies: qaqc\_disclosed is true **Cut-off Undisclosed** Polarity: negative Definition: High-grade interval reported without stating the cut-off grade used for compositing. Why it applies: no cutoff\_grade was stated **Nearology Play** Polarity: neutral Definition: Value premise rests on proximity to a known deposit rather than own results. Why it applies: proximity is offered as the value premise: "- 1.4m of 9 g/t Ag, \*\*0.49% Cu\*\* - Four rigs continue to drill at Ballywire, with a fifth rig drilling at the Company's" ### 26-3552-59 [Link to this fact](https://atlas-staging.minestarters.com/news/group-eleven-intersects-24m-of-mineralization-including-6-3m-of-7-9-zn-pb-and-14--40fd1b68-bb38-4bb8-9303-861389f4e9e5#fact-drill-facts-115) Ballywire · lead #### Identity - Hole ID: 26-3552-59 - Project: Ballywire - Commodity: lead - Region: ireland - Reported Region: ireland - Ticker: ZNG.V #### Geometry - Grade: 0.01 - Grade Unit: % - Intercept: 2.68 m - True Width: 1.876 m - From: 304.29 m - To: 306.97 m - Intercept Depth: 304.29 m #### Classification - Program: exploration - Sample Type: drill - Group ID: 26-3552-59:304.29-306.97 #### QA/QC - Laboratory: ALS Laboratories - QA/QC Disclosed: Yes - Lab Certified: Yes - QP Signed: Yes - QA/QC Methods: standards, blanks #### Review - Needs Review: No - Interp. Status: scored - Historical: No #### Dates - Event date: 2026-10-14T00:00:00.000Z Reasoning: While the lead grade is very low, this intercept indicates deeper copper-silver mineralization in the potential parallel zone. - Positive factor: Good intercept length for deeper mineralization - Positive factor: True width estimated at 70% of downhole length - Negative factor: Very low lead grade Evidence · table > 0.01 Context: 2.68 #### Tags used in scoring **True Width Disclosed** Polarity: positive Definition: Actual thickness perpendicular to structure is stated, not just downhole length. Why it applies: true\_width\_m is 1.876 **QA/QC Disclosed** Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Why it applies: qaqc\_disclosed is true **Cut-off Undisclosed** Polarity: negative Definition: High-grade interval reported without stating the cut-off grade used for compositing. Why it applies: no cutoff\_grade was stated **Nearology Play** Polarity: neutral Definition: Value premise rests on proximity to a known deposit rather than own results. Why it applies: proximity is offered as the value premise: "- 1.4m of 9 g/t Ag, \*\*0.49% Cu\*\* - Four rigs continue to drill at Ballywire, with a fifth rig drilling at the Company's" ### 26-3552-59 [Link to this fact](https://atlas-staging.minestarters.com/news/group-eleven-intersects-24m-of-mineralization-including-6-3m-of-7-9-zn-pb-and-14--40fd1b68-bb38-4bb8-9303-861389f4e9e5#fact-drill-facts-116) Ballywire · silver #### Identity - Hole ID: 26-3552-59 - Project: Ballywire - Commodity: silver - Region: ireland - Reported Region: ireland - Ticker: ZNG.V #### Geometry - Grade: 3.4 - Grade Unit: g/t - Intercept: 2.68 m - True Width: 1.876 m - From: 304.29 m - To: 306.97 m - Intercept Depth: 304.29 m #### Classification - Program: exploration - Sample Type: drill - Group ID: 26-3552-59:304.29-306.97 #### QA/QC - Laboratory: ALS Laboratories - QA/QC Disclosed: Yes - Lab Certified: Yes - QP Signed: Yes - QA/QC Methods: standards, blanks #### Review - Needs Review: No - Interp. Status: scored - Historical: No #### Dates - Event date: 2026-10-14T00:00:00.000Z Reasoning: This moderate silver grade over a good width contributes to the polymetallic nature of the deeper mineralization in the potential parallel zone. - Positive factor: Moderate silver grade over a good width for deeper mineralization - Positive factor: True width estimated at 70% of downhole length Evidence · table > 3.4 Context: 2.68 #### Tags used in scoring **True Width Disclosed** Polarity: positive Definition: Actual thickness perpendicular to structure is stated, not just downhole length. Why it applies: true\_width\_m is 1.876 **QA/QC Disclosed** Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Why it applies: qaqc\_disclosed is true **Cut-off Undisclosed** Polarity: negative Definition: High-grade interval reported without stating the cut-off grade used for compositing. Why it applies: no cutoff\_grade was stated **Nearology Play** Polarity: neutral Definition: Value premise rests on proximity to a known deposit rather than own results. Why it applies: proximity is offered as the value premise: "- 1.4m of 9 g/t Ag, \*\*0.49% Cu\*\* - Four rigs continue to drill at Ballywire, with a fifth rig drilling at the Company's" ### 26-3552-59 [Link to this fact](https://atlas-staging.minestarters.com/news/group-eleven-intersects-24m-of-mineralization-including-6-3m-of-7-9-zn-pb-and-14--40fd1b68-bb38-4bb8-9303-861389f4e9e5#fact-drill-facts-117) Ballywire · copper #### Identity - Hole ID: 26-3552-59 - Project: Ballywire - Commodity: copper - Region: ireland - Reported Region: ireland - Ticker: ZNG.V #### Geometry - Grade: 0.08 - Grade Unit: % - Intercept: 2.68 m - True Width: 1.876 m - From: 304.29 m - To: 306.97 m - Intercept Depth: 304.29 m #### Classification - Program: exploration - Sample Type: drill - Group ID: 26-3552-59:304.29-306.97 #### QA/QC - Laboratory: ALS Laboratories - QA/QC Disclosed: Yes - Lab Certified: Yes - QP Signed: Yes - QA/QC Methods: standards, blanks #### Review - Needs Review: No - Interp. Status: scored - Historical: No #### Dates - Event date: 2026-10-14T00:00:00.000Z Reasoning: This moderate copper grade over a good width contributes to the polymetallic nature of the deeper mineralization in the potential parallel zone. - Positive factor: Moderate copper grade over a good width for deeper mineralization - Positive factor: True width estimated at 70% of downhole length Evidence · table > 0.08 Context: 2.68 #### Tags used in scoring **True Width Disclosed** Polarity: positive Definition: Actual thickness perpendicular to structure is stated, not just downhole length. Why it applies: true\_width\_m is 1.876 **QA/QC Disclosed** Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Why it applies: qaqc\_disclosed is true **Cut-off Undisclosed** Polarity: negative Definition: High-grade interval reported without stating the cut-off grade used for compositing. Why it applies: no cutoff\_grade was stated **Nearology Play** Polarity: neutral Definition: Value premise rests on proximity to a known deposit rather than own results. Why it applies: proximity is offered as the value premise: "- 1.4m of 9 g/t Ag, \*\*0.49% Cu\*\* - Four rigs continue to drill at Ballywire, with a fifth rig drilling at the Company's" ### 26-3552-61 [Link to this fact](https://atlas-staging.minestarters.com/news/group-eleven-intersects-24m-of-mineralization-including-6-3m-of-7-9-zn-pb-and-14--40fd1b68-bb38-4bb8-9303-861389f4e9e5#fact-drill-facts-118) Ballywire · zinc #### Identity - Hole ID: 26-3552-61 - Project: Ballywire - Commodity: zinc - Region: ireland - Reported Region: ireland - Ticker: ZNG.V #### Geometry - Grade: 0.08 - Grade Unit: % - Intercept: 43.37 m - True Width: 39.033 m - From: 355.4 m - To: 398.77 m - Intercept Depth: 355.4 m #### Classification - Program: exploration - Sample Type: drill - Group ID: 26-3552-61:355.4-398.77 #### QA/QC - Laboratory: ALS Laboratories - QA/QC Disclosed: Yes - Lab Certified: Yes - QP Signed: Yes - QA/QC Methods: standards, blanks #### Review - Needs Review: No - Interp. Status: scored - Historical: No #### Dates - Event date: 2026-10-14T00:00:00.000Z Reasoning: This very broad intercept, while low-grade, indicates widespread mineralization downdip of a known high-grade zone. - Positive factor: Very broad intercept length, indicating widespread mineralization - Positive factor: True width estimated at 90% of downhole length - Negative factor: Very low zinc grade Evidence · table > 0.08 Context: 43.37 #### Tags used in scoring **True Width Disclosed** Polarity: positive Definition: Actual thickness perpendicular to structure is stated, not just downhole length. Why it applies: true\_width\_m is 39.033 **QA/QC Disclosed** Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Why it applies: qaqc\_disclosed is true **Cut-off Undisclosed** Polarity: negative Definition: High-grade interval reported without stating the cut-off grade used for compositing. Why it applies: no cutoff\_grade was stated **Nearology Play** Polarity: neutral Definition: Value premise rests on proximity to a known deposit rather than own results. Why it applies: proximity is offered as the value premise: "- 1.4m of 9 g/t Ag, \*\*0.49% Cu\*\* - Four rigs continue to drill at Ballywire, with a fifth rig drilling at the Company's" ### 26-3552-61 [Link to this fact](https://atlas-staging.minestarters.com/news/group-eleven-intersects-24m-of-mineralization-including-6-3m-of-7-9-zn-pb-and-14--40fd1b68-bb38-4bb8-9303-861389f4e9e5#fact-drill-facts-119) Ballywire · lead #### Identity - Hole ID: 26-3552-61 - Project: Ballywire - Commodity: lead - Region: ireland - Reported Region: ireland - Ticker: ZNG.V #### Geometry - Grade: 0.02 - Grade Unit: % - Intercept: 43.37 m - True Width: 39.033 m - From: 355.4 m - To: 398.77 m - Intercept Depth: 355.4 m #### Classification - Program: exploration - Sample Type: drill - Group ID: 26-3552-61:355.4-398.77 #### QA/QC - Laboratory: ALS Laboratories - QA/QC Disclosed: Yes - Lab Certified: Yes - QP Signed: Yes - QA/QC Methods: standards, blanks #### Review - Needs Review: No - Interp. Status: scored - Historical: No #### Dates - Event date: 2026-10-14T00:00:00.000Z Reasoning: This very broad intercept, while low-grade, indicates widespread mineralization downdip of a known high-grade zone. - Positive factor: Very broad intercept length, indicating widespread mineralization - Positive factor: True width estimated at 90% of downhole length - Negative factor: Very low lead grade Evidence · table > 0.02 Context: 43.37 #### Tags used in scoring **True Width Disclosed** Polarity: positive Definition: Actual thickness perpendicular to structure is stated, not just downhole length. Why it applies: true\_width\_m is 39.033 **QA/QC Disclosed** Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Why it applies: qaqc\_disclosed is true **Cut-off Undisclosed** Polarity: negative Definition: High-grade interval reported without stating the cut-off grade used for compositing. Why it applies: no cutoff\_grade was stated **Nearology Play** Polarity: neutral Definition: Value premise rests on proximity to a known deposit rather than own results. Why it applies: proximity is offered as the value premise: "- 1.4m of 9 g/t Ag, \*\*0.49% Cu\*\* - Four rigs continue to drill at Ballywire, with a fifth rig drilling at the Company's" ### 26-3552-61 [Link to this fact](https://atlas-staging.minestarters.com/news/group-eleven-intersects-24m-of-mineralization-including-6-3m-of-7-9-zn-pb-and-14--40fd1b68-bb38-4bb8-9303-861389f4e9e5#fact-drill-facts-120) Ballywire · silver #### Identity - Hole ID: 26-3552-61 - Project: Ballywire - Commodity: silver - Region: ireland - Reported Region: ireland - Ticker: ZNG.V #### Geometry - Grade: 0.6 - Grade Unit: g/t - Intercept: 43.37 m - True Width: 39.033 m - From: 355.4 m - To: 398.77 m - Intercept Depth: 355.4 m #### Classification - Program: exploration - Sample Type: drill - Group ID: 26-3552-61:355.4-398.77 #### QA/QC - Laboratory: ALS Laboratories - QA/QC Disclosed: Yes - Lab Certified: Yes - QP Signed: Yes - QA/QC Methods: standards, blanks #### Review - Needs Review: No - Interp. Status: scored - Historical: No #### Dates - Event date: 2026-10-14T00:00:00.000Z Reasoning: This very broad intercept, while low-grade, indicates widespread mineralization downdip of a known high-grade zone. - Positive factor: Very broad intercept length, indicating widespread mineralization - Positive factor: True width estimated at 90% of downhole length - Negative factor: Very low silver grade Evidence · table > 0.6 Context: 43.37 #### Tags used in scoring **True Width Disclosed** Polarity: positive Definition: Actual thickness perpendicular to structure is stated, not just downhole length. Why it applies: true\_width\_m is 39.033 **QA/QC Disclosed** Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Why it applies: qaqc\_disclosed is true **Cut-off Undisclosed** Polarity: negative Definition: High-grade interval reported without stating the cut-off grade used for compositing. Why it applies: no cutoff\_grade was stated **Nearology Play** Polarity: neutral Definition: Value premise rests on proximity to a known deposit rather than own results. Why it applies: proximity is offered as the value premise: "- 1.4m of 9 g/t Ag, \*\*0.49% Cu\*\* - Four rigs continue to drill at Ballywire, with a fifth rig drilling at the Company's" ### 26-3552-61 [Link to this fact](https://atlas-staging.minestarters.com/news/group-eleven-intersects-24m-of-mineralization-including-6-3m-of-7-9-zn-pb-and-14--40fd1b68-bb38-4bb8-9303-861389f4e9e5#fact-drill-facts-121) Ballywire · zinc #### Identity - Hole ID: 26-3552-61 - Project: Ballywire - Commodity: zinc - Region: ireland - Reported Region: ireland - Ticker: ZNG.V #### Geometry - Grade: 0.22 - Grade Unit: % - Intercept: 8.28 m - True Width: 7.452 m - From: 382.78 m - To: 391.06 m - Intercept Depth: 355.4 m #### Classification - Program: exploration - Sample Type: drill - Group ID: 26-3552-61:382.78-391.06 #### QA/QC - Laboratory: ALS Laboratories - QA/QC Disclosed: Yes - Lab Certified: Yes - QP Signed: Yes - QA/QC Methods: standards, blanks #### Review - Needs Review: No - Interp. Status: scored - Historical: No #### Dates - Event date: 2026-10-14T00:00:00.000Z Reasoning: This moderate zinc grade over a good width indicates continuous mineralization downdip of a known high-grade zone. - Positive factor: Good intercept length for downdip mineralization - Positive factor: Moderate zinc grade - Positive factor: True width estimated at 90% of downhole length Evidence · table > 0.22 Context: 8.28 #### Tags used in scoring **True Width Disclosed** Polarity: positive Definition: Actual thickness perpendicular to structure is stated, not just downhole length. Why it applies: true\_width\_m is 7.452 **QA/QC Disclosed** Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Why it applies: qaqc\_disclosed is true **Cut-off Undisclosed** Polarity: negative Definition: High-grade interval reported without stating the cut-off grade used for compositing. Why it applies: no cutoff\_grade was stated **Nearology Play** Polarity: neutral Definition: Value premise rests on proximity to a known deposit rather than own results. Why it applies: proximity is offered as the value premise: "- 1.4m of 9 g/t Ag, \*\*0.49% Cu\*\* - Four rigs continue to drill at Ballywire, with a fifth rig drilling at the Company's" ### 26-3552-61 [Link to this fact](https://atlas-staging.minestarters.com/news/group-eleven-intersects-24m-of-mineralization-including-6-3m-of-7-9-zn-pb-and-14--40fd1b68-bb38-4bb8-9303-861389f4e9e5#fact-drill-facts-122) Ballywire · lead #### Identity - Hole ID: 26-3552-61 - Project: Ballywire - Commodity: lead - Region: ireland - Reported Region: ireland - Ticker: ZNG.V #### Geometry - Grade: 0.05 - Grade Unit: % - Intercept: 8.28 m - True Width: 7.452 m - From: 382.78 m - To: 391.06 m - Intercept Depth: 355.4 m #### Classification - Program: exploration - Sample Type: drill - Group ID: 26-3552-61:382.78-391.06 #### QA/QC - Laboratory: ALS Laboratories - QA/QC Disclosed: Yes - Lab Certified: Yes - QP Signed: Yes - QA/QC Methods: standards, blanks #### Review - Needs Review: No - Interp. Status: scored - Historical: No #### Dates - Event date: 2026-10-14T00:00:00.000Z Reasoning: This moderate lead grade over a good width indicates continuous mineralization downdip of a known high-grade zone. - Positive factor: Good intercept length for downdip mineralization - Positive factor: Moderate lead grade - Positive factor: True width estimated at 90% of downhole length Evidence · table > 0.05 Context: 8.28 #### Tags used in scoring **True Width Disclosed** Polarity: positive Definition: Actual thickness perpendicular to structure is stated, not just downhole length. Why it applies: true\_width\_m is 7.452 **QA/QC Disclosed** Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Why it applies: qaqc\_disclosed is true **Cut-off Undisclosed** Polarity: negative Definition: High-grade interval reported without stating the cut-off grade used for compositing. Why it applies: no cutoff\_grade was stated **Nearology Play** Polarity: neutral Definition: Value premise rests on proximity to a known deposit rather than own results. Why it applies: proximity is offered as the value premise: "- 1.4m of 9 g/t Ag, \*\*0.49% Cu\*\* - Four rigs continue to drill at Ballywire, with a fifth rig drilling at the Company's" ### 26-3552-61 [Link to this fact](https://atlas-staging.minestarters.com/news/group-eleven-intersects-24m-of-mineralization-including-6-3m-of-7-9-zn-pb-and-14--40fd1b68-bb38-4bb8-9303-861389f4e9e5#fact-drill-facts-123) Ballywire · silver #### Identity - Hole ID: 26-3552-61 - Project: Ballywire - Commodity: silver - Region: ireland - Reported Region: ireland - Ticker: ZNG.V #### Geometry - Grade: 1.7 - Grade Unit: g/t - Intercept: 8.28 m - True Width: 7.452 m - From: 382.78 m - To: 391.06 m - Intercept Depth: 355.4 m #### Classification - Program: exploration - Sample Type: drill - Group ID: 26-3552-61:382.78-391.06 #### QA/QC - Laboratory: ALS Laboratories - QA/QC Disclosed: Yes - Lab Certified: Yes - QP Signed: Yes - QA/QC Methods: standards, blanks #### Review - Needs Review: No - Interp. Status: scored - Historical: No #### Dates - Event date: 2026-10-14T00:00:00.000Z Reasoning: This moderate silver grade over a good width indicates continuous mineralization downdip of a known high-grade zone. - Positive factor: Good intercept length for downdip mineralization - Positive factor: Moderate silver grade - Positive factor: True width estimated at 90% of downhole length Evidence · table > 1.7 Context: 8.28 #### Tags used in scoring **True Width Disclosed** Polarity: positive Definition: Actual thickness perpendicular to structure is stated, not just downhole length. Why it applies: true\_width\_m is 7.452 **QA/QC Disclosed** Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Why it applies: qaqc\_disclosed is true **Cut-off Undisclosed** Polarity: negative Definition: High-grade interval reported without stating the cut-off grade used for compositing. Why it applies: no cutoff\_grade was stated **Nearology Play** Polarity: neutral Definition: Value premise rests on proximity to a known deposit rather than own results. Why it applies: proximity is offered as the value premise: "- 1.4m of 9 g/t Ag, \*\*0.49% Cu\*\* - Four rigs continue to drill at Ballywire, with a fifth rig drilling at the Company's" ### 26-3552-61 [Link to this fact](https://atlas-staging.minestarters.com/news/group-eleven-intersects-24m-of-mineralization-including-6-3m-of-7-9-zn-pb-and-14--40fd1b68-bb38-4bb8-9303-861389f4e9e5#fact-drill-facts-124) Ballywire · zinc #### Identity - Hole ID: 26-3552-61 - Project: Ballywire - Commodity: zinc - Region: ireland - Reported Region: ireland - Ticker: ZNG.V #### Geometry - Grade: 0.31 - Grade Unit: % - Intercept: 4.62 m - True Width: 4.158 m - From: 386.44 m - To: 391.06 m - Intercept Depth: 355.4 m #### Classification - Program: exploration - Sample Type: drill - Group ID: 26-3552-61:386.44-391.06 #### QA/QC - Laboratory: ALS Laboratories - QA/QC Disclosed: Yes - Lab Certified: Yes - QP Signed: Yes - QA/QC Methods: standards, blanks #### Review - Needs Review: No - Interp. Status: scored - Historical: No #### Dates - Event date: 2026-10-14T00:00:00.000Z Reasoning: This moderate zinc grade over a good width indicates a continuous, slightly higher-grade zone downdip. - Positive factor: Good intercept length for downdip mineralization - Positive factor: Moderate zinc grade - Positive factor: True width estimated at 90% of downhole length Evidence · table > 0.31 Context: 4.62 #### Tags used in scoring **True Width Disclosed** Polarity: positive Definition: Actual thickness perpendicular to structure is stated, not just downhole length. Why it applies: true\_width\_m is 4.158 **QA/QC Disclosed** Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Why it applies: qaqc\_disclosed is true **Cut-off Undisclosed** Polarity: negative Definition: High-grade interval reported without stating the cut-off grade used for compositing. Why it applies: no cutoff\_grade was stated **Nearology Play** Polarity: neutral Definition: Value premise rests on proximity to a known deposit rather than own results. Why it applies: proximity is offered as the value premise: "- 1.4m of 9 g/t Ag, \*\*0.49% Cu\*\* - Four rigs continue to drill at Ballywire, with a fifth rig drilling at the Company's" ### 26-3552-61 [Link to this fact](https://atlas-staging.minestarters.com/news/group-eleven-intersects-24m-of-mineralization-including-6-3m-of-7-9-zn-pb-and-14--40fd1b68-bb38-4bb8-9303-861389f4e9e5#fact-drill-facts-125) Ballywire · lead #### Identity - Hole ID: 26-3552-61 - Project: Ballywire - Commodity: lead - Region: ireland - Reported Region: ireland - Ticker: ZNG.V #### Geometry - Grade: 0.03 - Grade Unit: % - Intercept: 4.62 m - True Width: 4.158 m - From: 386.44 m - To: 391.06 m - Intercept Depth: 355.4 m #### Classification - Program: exploration - Sample Type: drill - Group ID: 26-3552-61:386.44-391.06 #### QA/QC - Laboratory: ALS Laboratories - QA/QC Disclosed: Yes - Lab Certified: Yes - QP Signed: Yes - QA/QC Methods: standards, blanks #### Review - Needs Review: No - Interp. Status: scored - Historical: No #### Dates - Event date: 2026-10-14T00:00:00.000Z Reasoning: This moderate lead grade over a good width indicates a continuous, slightly higher-grade zone downdip. - Positive factor: Good intercept length for downdip mineralization - Positive factor: Moderate lead grade - Positive factor: True width estimated at 90% of downhole length Evidence · table > 0.03 Context: 4.62 #### Tags used in scoring **True Width Disclosed** Polarity: positive Definition: Actual thickness perpendicular to structure is stated, not just downhole length. Why it applies: true\_width\_m is 4.158 **QA/QC Disclosed** Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Why it applies: qaqc\_disclosed is true **Cut-off Undisclosed** Polarity: negative Definition: High-grade interval reported without stating the cut-off grade used for compositing. Why it applies: no cutoff\_grade was stated **Nearology Play** Polarity: neutral Definition: Value premise rests on proximity to a known deposit rather than own results. Why it applies: proximity is offered as the value premise: "- 1.4m of 9 g/t Ag, \*\*0.49% Cu\*\* - Four rigs continue to drill at Ballywire, with a fifth rig drilling at the Company's" ## How Atlas produces this analysis Minestarters Atlas uses automated extraction to summarize mining announcements, identify reported measurements, and classify supporting evidence. Sentiment reflects the extracted narrative and classification rules; it is an interpretation, not a reported measurement. Evidence quotes and context are provided where available. Missing data, low-confidence results, and review flags indicate limitations. Check the original publisher announcement before relying on an interpretation.