Group Eleven Intersects 24m of Mineralization, Including 6.3m of 7.9% Zn+Pb and 14 g/t Ag in a 270m Step-Out; Plus Cuts 7.4m of 10.1% Zn+Pb and 36 g/t Ag at Ballywire
Original announcement by orestocks on
- Company
- Group Eleven Resources Corp.
- Ticker
- ZNG.V
- Exchange
- Unavailable
- Region
- Ireland
- Primary commodity
- Zinc
- Secondary commodities
- Lead, Silver, Copper, Antimony
- Document categories
- Drill results
- Extracted
- 2026-10-14 09:22:58 UTC
Analysis by Minestarters Atlas
Atlas analysis published:
Minestarters Atlas analysis
Summary
Group Eleven Resources announced assay results from five drill holes at its Ballywire discovery in Ireland, highlighted by a 270m step-out hole (26-2654-04) that intersected 24.2m of 2.8% Zn+Pb, including 6.3m of 7.9% Zn+Pb and 14 g/t Ag. Another hole (26-468-26) returned 7.4m of 10.1% Zn+Pb and 36 g/t Ag, filling a 390m gap. These results extend the strike length of higher-grade mineralization by 17% to 1.87km, with mineralization now intersected over 3.2km within a 6.0km prospective trend.
Reasoning: Group Eleven's drilling at Ballywire successfully extended the high-grade zinc-lead mineralization by 270m in a step-out hole, significantly increasing the known strike length and demonstrating strong potential for further expansion. Multiple holes returned high-grade Zn+Pb, Ag, and Cu intercepts, confirming continuity and opening new exploration targets.
Positive factors
- Significant step-out extension of 270m with high-grade Zn+Pb mineralization
- High-grade zinc intercepts exceeding previous bests (e.g., 18.75% Zn)
- Extension of known strike length by 17% to 1.87km
- Good silver and copper intercepts in multiple holes
- True width estimates provided for mineralization
- QA/QC procedures disclosed with certified lab and QP sign-off
- Identification of potential parallel mineralized zones
Negative factors
- Some silver and copper grades are below historical bests for the project
Low confidence — this extraction should be reviewed alongside the original source.
Facts used in scoring: 126
Extracted facts
Stored fact records: 126. Some facts used in scoring do not have a stored record.
Drill Results (126)
26-2654-04Ballywire · zincGrade: 2.38Grade Unit: %Intercept: 24.15 mView all detailsHide details
Identity
- Hole ID
- 26-2654-04
- Project
- Ballywire
- Commodity
- zinc
- Region
- ireland
- Reported Region
- ireland
- Ticker
- ZNG.V
Geometry
- Grade
- 2.38
- Grade Unit
- %
- Intercept
- 24.15 m
- True Width
- 21.735 m
- From
- 433.95 m
- To
- 458.1 m
- Intercept Depth
- 433.95 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- 26-2654-04:433.95-458.1
QA/QC
- Laboratory
- ALS Laboratories
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-10-14T00:00:00.000Z
Reasoning: This broad intercept in a significant step-out hole indicates a substantial mineralized zone, with a good zinc grade and confirmed true width, suggesting strong potential for resource expansion.
Positive factors
- Significant intercept length in a 270m step-out hole
- Good zinc grade for an initial broad intercept
- True width estimated at 90% of downhole length
Evidence · table
“2.38”
Context: 24.15
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 21.735
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "- 1.4m of 9 g/t Ag, **0.49% Cu** - Four rigs continue to drill at Ballywire, with a fifth rig drilling at the Company's"
26-2654-04Ballywire · leadGrade: 0.4Grade Unit: %Intercept: 24.15 mView all detailsHide details
Identity
- Hole ID
- 26-2654-04
- Project
- Ballywire
- Commodity
- lead
- Region
- ireland
- Reported Region
- ireland
- Ticker
- ZNG.V
Geometry
- Grade
- 0.4
- Grade Unit
- %
- Intercept
- 24.15 m
- True Width
- 21.735 m
- From
- 433.95 m
- To
- 458.1 m
- Intercept Depth
- 433.95 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- 26-2654-04:433.95-458.1
QA/QC
- Laboratory
- ALS Laboratories
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-10-14T00:00:00.000Z
Reasoning: The lead grade, while moderate, contributes to the overall polymetallic nature of this significant step-out intercept, confirming broad mineralization.
Positive factors
- Significant intercept length in a 270m step-out hole
- Lead grade contributes to overall Zn+Pb mineralization
- True width estimated at 90% of downhole length
Evidence · table
“0.40”
Context: 24.15
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 21.735
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "- 1.4m of 9 g/t Ag, **0.49% Cu** - Four rigs continue to drill at Ballywire, with a fifth rig drilling at the Company's"
26-2654-04Ballywire · silverGrade: 5.3Grade Unit: g/tIntercept: 24.15 mView all detailsHide details
Identity
- Hole ID
- 26-2654-04
- Project
- Ballywire
- Commodity
- silver
- Region
- ireland
- Reported Region
- ireland
- Ticker
- ZNG.V
Geometry
- Grade
- 5.3
- Grade Unit
- g/t
- Intercept
- 24.15 m
- True Width
- 21.735 m
- From
- 433.95 m
- To
- 458.1 m
- Intercept Depth
- 433.95 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- 26-2654-04:433.95-458.1
QA/QC
- Laboratory
- ALS Laboratories
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-10-14T00:00:00.000Z
Reasoning: The silver grade, while not high, contributes to the overall polymetallic nature of this important step-out intercept, confirming broad mineralization.
Positive factors
- Significant intercept length in a 270m step-out hole
- Silver grade adds to polymetallic value
- True width estimated at 90% of downhole length
Evidence · table
“5.3”
Context: 24.15
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 21.735
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "- 1.4m of 9 g/t Ag, **0.49% Cu** - Four rigs continue to drill at Ballywire, with a fifth rig drilling at the Company's"
26-2654-04Ballywire · zincGrade: 6.1Grade Unit: %Intercept: 7.23 mView all detailsHide details
Identity
- Hole ID
- 26-2654-04
- Project
- Ballywire
- Commodity
- zinc
- Region
- ireland
- Reported Region
- ireland
- Ticker
- ZNG.V
Geometry
- Grade
- 6.1
- Grade Unit
- %
- Intercept
- 7.23 m
- True Width
- 6.507 m
- From
- 442.46 m
- To
- 449.69 m
- Intercept Depth
- 433.95 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- 26-2654-04:442.46-449.69
QA/QC
- Laboratory
- ALS Laboratories
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-10-14T00:00:00.000Z
Reasoning: This high-grade zinc intercept within a broader mineralized zone in a step-out hole is very positive, indicating strong continuity of high-grade mineralization.
Positive factors
- High-grade zinc intercept within a significant step-out hole
- Good width for high-grade mineralization
- True width estimated at 90% of downhole length
Evidence · table
“6.10”
Context: 7.23
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 6.507
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "- 1.4m of 9 g/t Ag, **0.49% Cu** - Four rigs continue to drill at Ballywire, with a fifth rig drilling at the Company's"
26-2654-04Ballywire · leadGrade: 1.06Grade Unit: %Intercept: 7.23 mView all detailsHide details
Identity
- Hole ID
- 26-2654-04
- Project
- Ballywire
- Commodity
- lead
- Region
- ireland
- Reported Region
- ireland
- Ticker
- ZNG.V
Geometry
- Grade
- 1.06
- Grade Unit
- %
- Intercept
- 7.23 m
- True Width
- 6.507 m
- From
- 442.46 m
- To
- 449.69 m
- Intercept Depth
- 433.95 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- 26-2654-04:442.46-449.69
QA/QC
- Laboratory
- ALS Laboratories
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-10-14T00:00:00.000Z
Reasoning: The lead grade significantly contributes to the high-grade polymetallic nature of this intercept, reinforcing the quality of the mineralization in the step-out hole.
Positive factors
- Good lead grade contributing to high-grade Zn+Pb mineralization
- Good width for high-grade mineralization
- True width estimated at 90% of downhole length
Evidence · table
“1.06”
Context: 7.23
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 6.507
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "- 1.4m of 9 g/t Ag, **0.49% Cu** - Four rigs continue to drill at Ballywire, with a fifth rig drilling at the Company's"
26-2654-04Ballywire · silverGrade: 13.2Grade Unit: g/tIntercept: 7.23 mView all detailsHide details
Identity
- Hole ID
- 26-2654-04
- Project
- Ballywire
- Commodity
- silver
- Region
- ireland
- Reported Region
- ireland
- Ticker
- ZNG.V
Geometry
- Grade
- 13.2
- Grade Unit
- g/t
- Intercept
- 7.23 m
- True Width
- 6.507 m
- From
- 442.46 m
- To
- 449.69 m
- Intercept Depth
- 433.95 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- 26-2654-04:442.46-449.69
QA/QC
- Laboratory
- ALS Laboratories
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-10-14T00:00:00.000Z
Reasoning: The silver grade enhances the polymetallic nature of this high-grade intercept, contributing to the overall value of the step-out discovery.
Positive factors
- Moderate silver grade adding to polymetallic value
- Good width for mineralization
- True width estimated at 90% of downhole length
Evidence · table
“13.2”
Context: 7.23
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 6.507
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "- 1.4m of 9 g/t Ag, **0.49% Cu** - Four rigs continue to drill at Ballywire, with a fifth rig drilling at the Company's"
26-2654-04Ballywire · copperGrade: 0.01Grade Unit: %Intercept: 7.23 mView all detailsHide details
Identity
- Hole ID
- 26-2654-04
- Project
- Ballywire
- Commodity
- copper
- Region
- ireland
- Reported Region
- ireland
- Ticker
- ZNG.V
Geometry
- Grade
- 0.01
- Grade Unit
- %
- Intercept
- 7.23 m
- True Width
- 6.507 m
- From
- 442.46 m
- To
- 449.69 m
- Intercept Depth
- 433.95 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- 26-2654-04:442.46-449.69
QA/QC
- Laboratory
- ALS Laboratories
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-10-14T00:00:00.000Z
Reasoning: While the copper grade is very low, its presence in this high-grade polymetallic intercept is noted as part of the overall mineral assemblage.
Positive factors
- Presence of copper, indicating polymetallic mineralization
- True width estimated at 90% of downhole length
Negative factors
- Very low copper grade
Evidence · table
“0.01”
Context: 7.23
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 6.507
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "- 1.4m of 9 g/t Ag, **0.49% Cu** - Four rigs continue to drill at Ballywire, with a fifth rig drilling at the Company's"
26-2654-04Ballywire · zincGrade: 6.75Grade Unit: %Intercept: 6.27 mView all detailsHide details
Identity
- Hole ID
- 26-2654-04
- Project
- Ballywire
- Commodity
- zinc
- Region
- ireland
- Reported Region
- ireland
- Ticker
- ZNG.V
Geometry
- Grade
- 6.75
- Grade Unit
- %
- Intercept
- 6.27 m
- True Width
- 5.643 m
- From
- 443.42 m
- To
- 449.69 m
- Intercept Depth
- 433.95 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- 26-2654-04:443.42-449.69
QA/QC
- Laboratory
- ALS Laboratories
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-10-14T00:00:00.000Z
Reasoning: This very high-grade zinc intercept is a bonanza result, confirming excellent mineralization quality and continuity in the step-out area.
Positive factors
- Very high-grade zinc intercept within a significant step-out hole
- Good width for bonanza-grade mineralization
- True width estimated at 90% of downhole length
Evidence · table
“6.75”
Context: 6.27
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 5.643
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "- 1.4m of 9 g/t Ag, **0.49% Cu** - Four rigs continue to drill at Ballywire, with a fifth rig drilling at the Company's"
26-2654-04Ballywire · leadGrade: 1.15Grade Unit: %Intercept: 6.27 mView all detailsHide details
Identity
- Hole ID
- 26-2654-04
- Project
- Ballywire
- Commodity
- lead
- Region
- ireland
- Reported Region
- ireland
- Ticker
- ZNG.V
Geometry
- Grade
- 1.15
- Grade Unit
- %
- Intercept
- 6.27 m
- True Width
- 5.643 m
- From
- 443.42 m
- To
- 449.69 m
- Intercept Depth
- 433.95 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- 26-2654-04:443.42-449.69
QA/QC
- Laboratory
- ALS Laboratories
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-10-14T00:00:00.000Z
Reasoning: The high lead grade significantly enhances the bonanza-grade polymetallic nature of this intercept, reinforcing the excellent quality of mineralization.
Positive factors
- High-grade lead contributing to bonanza Zn+Pb mineralization
- Good width for high-grade mineralization
- True width estimated at 90% of downhole length
Evidence · table
“1.15”
Context: 6.27
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 5.643
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "- 1.4m of 9 g/t Ag, **0.49% Cu** - Four rigs continue to drill at Ballywire, with a fifth rig drilling at the Company's"
26-2654-04Ballywire · silverGrade: 13.8Grade Unit: g/tIntercept: 6.27 mView all detailsHide details
Identity
- Hole ID
- 26-2654-04
- Project
- Ballywire
- Commodity
- silver
- Region
- ireland
- Reported Region
- ireland
- Ticker
- ZNG.V
Geometry
- Grade
- 13.8
- Grade Unit
- g/t
- Intercept
- 6.27 m
- True Width
- 5.643 m
- From
- 443.42 m
- To
- 449.69 m
- Intercept Depth
- 433.95 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- 26-2654-04:443.42-449.69
QA/QC
- Laboratory
- ALS Laboratories
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-10-14T00:00:00.000Z
Reasoning: The silver grade enhances the polymetallic nature of this bonanza-grade intercept, contributing to the overall value of the step-out discovery.
Positive factors
- Moderate silver grade adding to polymetallic value
- Good width for mineralization
- True width estimated at 90% of downhole length
Evidence · table
“13.8”
Context: 6.27
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 5.643
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "- 1.4m of 9 g/t Ag, **0.49% Cu** - Four rigs continue to drill at Ballywire, with a fifth rig drilling at the Company's"
26-2654-04Ballywire · copperGrade: 0.01Grade Unit: %Intercept: 6.27 mView all detailsHide details
Identity
- Hole ID
- 26-2654-04
- Project
- Ballywire
- Commodity
- copper
- Region
- ireland
- Reported Region
- ireland
- Ticker
- ZNG.V
Geometry
- Grade
- 0.01
- Grade Unit
- %
- Intercept
- 6.27 m
- True Width
- 5.643 m
- From
- 443.42 m
- To
- 449.69 m
- Intercept Depth
- 433.95 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- 26-2654-04:443.42-449.69
QA/QC
- Laboratory
- ALS Laboratories
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-10-14T00:00:00.000Z
Reasoning: While the copper grade is very low, its presence in this bonanza-grade polymetallic intercept is noted as part of the overall mineral assemblage.
Positive factors
- Presence of copper, indicating polymetallic mineralization
- True width estimated at 90% of downhole length
Negative factors
- Very low copper grade
Evidence · table
“0.01”
Context: 6.27
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 5.643
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "- 1.4m of 9 g/t Ag, **0.49% Cu** - Four rigs continue to drill at Ballywire, with a fifth rig drilling at the Company's"
26-2654-04Ballywire · zincGrade: 9.14Grade Unit: %Intercept: 2.85 mView all detailsHide details
Identity
- Hole ID
- 26-2654-04
- Project
- Ballywire
- Commodity
- zinc
- Region
- ireland
- Reported Region
- ireland
- Ticker
- ZNG.V
Geometry
- Grade
- 9.14
- Grade Unit
- %
- Intercept
- 2.85 m
- True Width
- 2.565 m
- From
- 443.42 m
- To
- 446.27 m
- Intercept Depth
- 433.95 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- 26-2654-04:443.42-446.27
QA/QC
- Laboratory
- ALS Laboratories
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-10-14T00:00:00.000Z
Reasoning: This exceptional zinc grade within a high-grade zone further confirms the bonanza-grade potential and continuity of mineralization in the step-out area.
Positive factors
- Exceptional zinc grade within a significant step-out hole
- Good width for bonanza-grade mineralization
- True width estimated at 90% of downhole length
Evidence · table
“9.14”
Context: 2.85
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 2.565
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "- 1.4m of 9 g/t Ag, **0.49% Cu** - Four rigs continue to drill at Ballywire, with a fifth rig drilling at the Company's"
26-2654-04Ballywire · leadGrade: 1.72Grade Unit: %Intercept: 2.85 mView all detailsHide details
Identity
- Hole ID
- 26-2654-04
- Project
- Ballywire
- Commodity
- lead
- Region
- ireland
- Reported Region
- ireland
- Ticker
- ZNG.V
Geometry
- Grade
- 1.72
- Grade Unit
- %
- Intercept
- 2.85 m
- True Width
- 2.565 m
- From
- 443.42 m
- To
- 446.27 m
- Intercept Depth
- 433.95 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- 26-2654-04:443.42-446.27
QA/QC
- Laboratory
- ALS Laboratories
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-10-14T00:00:00.000Z
Reasoning: The exceptional lead grade further enhances the bonanza-grade polymetallic nature of this intercept, indicating very high-quality mineralization.
Positive factors
- Exceptional lead grade contributing to bonanza Zn+Pb mineralization
- Good width for high-grade mineralization
- True width estimated at 90% of downhole length
Evidence · table
“1.72”
Context: 2.85
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 2.565
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "- 1.4m of 9 g/t Ag, **0.49% Cu** - Four rigs continue to drill at Ballywire, with a fifth rig drilling at the Company's"
26-2654-04Ballywire · silverGrade: 17.9Grade Unit: g/tIntercept: 2.85 mView all detailsHide details
Identity
- Hole ID
- 26-2654-04
- Project
- Ballywire
- Commodity
- silver
- Region
- ireland
- Reported Region
- ireland
- Ticker
- ZNG.V
Geometry
- Grade
- 17.9
- Grade Unit
- g/t
- Intercept
- 2.85 m
- True Width
- 2.565 m
- From
- 443.42 m
- To
- 446.27 m
- Intercept Depth
- 433.95 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- 26-2654-04:443.42-446.27
QA/QC
- Laboratory
- ALS Laboratories
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-10-14T00:00:00.000Z
Reasoning: The silver grade enhances the polymetallic nature of this exceptional intercept, contributing to the overall value of the step-out discovery.
Positive factors
- Moderate silver grade adding to polymetallic value
- Good width for mineralization
- True width estimated at 90% of downhole length
Evidence · table
“17.9”
Context: 2.85
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 2.565
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "- 1.4m of 9 g/t Ag, **0.49% Cu** - Four rigs continue to drill at Ballywire, with a fifth rig drilling at the Company's"
26-2654-04Ballywire · copperGrade: 0.01Grade Unit: %Intercept: 2.85 mView all detailsHide details
Identity
- Hole ID
- 26-2654-04
- Project
- Ballywire
- Commodity
- copper
- Region
- ireland
- Reported Region
- ireland
- Ticker
- ZNG.V
Geometry
- Grade
- 0.01
- Grade Unit
- %
- Intercept
- 2.85 m
- True Width
- 2.565 m
- From
- 443.42 m
- To
- 446.27 m
- Intercept Depth
- 433.95 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- 26-2654-04:443.42-446.27
QA/QC
- Laboratory
- ALS Laboratories
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-10-14T00:00:00.000Z
Reasoning: While the copper grade is very low, its presence in this exceptional polymetallic intercept is noted as part of the overall mineral assemblage.
Positive factors
- Presence of copper, indicating polymetallic mineralization
- True width estimated at 90% of downhole length
Negative factors
- Very low copper grade
Evidence · table
“0.01”
Context: 2.85
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 2.565
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "- 1.4m of 9 g/t Ag, **0.49% Cu** - Four rigs continue to drill at Ballywire, with a fifth rig drilling at the Company's"
26-2654-04Ballywire · zincGrade: 18.75Grade Unit: %Intercept: 0.98 mView all detailsHide details
Identity
- Hole ID
- 26-2654-04
- Project
- Ballywire
- Commodity
- zinc
- Region
- ireland
- Reported Region
- ireland
- Ticker
- ZNG.V
Geometry
- Grade
- 18.75
- Grade Unit
- %
- Intercept
- 0.98 m
- True Width
- 0.882 m
- From
- 444.31 m
- To
- 445.29 m
- Intercept Depth
- 433.95 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- 26-2654-04:444.31-445.29
QA/QC
- Laboratory
- ALS Laboratories
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-10-14T00:00:00.000Z
Reasoning: This bonanza zinc grade is an exceptional result, significantly exceeding previous bests and indicating extremely high-grade mineralization in the step-out area.
Positive factors
- Bonanza zinc grade, exceeding prior bests for the project
- Exceptional grade over a narrow but significant interval
- True width estimated at 90% of downhole length
Evidence · table
“18.75”
Context: 0.98
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 0.882
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "- 1.4m of 9 g/t Ag, **0.49% Cu** - Four rigs continue to drill at Ballywire, with a fifth rig drilling at the Company's"
26-2654-04Ballywire · leadGrade: 3.39Grade Unit: %Intercept: 0.98 mView all detailsHide details
Identity
- Hole ID
- 26-2654-04
- Project
- Ballywire
- Commodity
- lead
- Region
- ireland
- Reported Region
- ireland
- Ticker
- ZNG.V
Geometry
- Grade
- 3.39
- Grade Unit
- %
- Intercept
- 0.98 m
- True Width
- 0.882 m
- From
- 444.31 m
- To
- 445.29 m
- Intercept Depth
- 433.95 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- 26-2654-04:444.31-445.29
QA/QC
- Laboratory
- ALS Laboratories
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-10-14T00:00:00.000Z
Reasoning: The bonanza lead grade further enhances the exceptional polymetallic nature of this intercept, indicating extremely high-quality mineralization.
Positive factors
- Bonanza lead grade contributing to exceptional Zn+Pb mineralization
- Exceptional grade over a narrow but significant interval
- True width estimated at 90% of downhole length
Evidence · table
“3.39”
Context: 0.98
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 0.882
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "- 1.4m of 9 g/t Ag, **0.49% Cu** - Four rigs continue to drill at Ballywire, with a fifth rig drilling at the Company's"
26-2654-04Ballywire · silverGrade: 27.2Grade Unit: g/tIntercept: 0.98 mView all detailsHide details
Identity
- Hole ID
- 26-2654-04
- Project
- Ballywire
- Commodity
- silver
- Region
- ireland
- Reported Region
- ireland
- Ticker
- ZNG.V
Geometry
- Grade
- 27.2
- Grade Unit
- g/t
- Intercept
- 0.98 m
- True Width
- 0.882 m
- From
- 444.31 m
- To
- 445.29 m
- Intercept Depth
- 433.95 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- 26-2654-04:444.31-445.29
QA/QC
- Laboratory
- ALS Laboratories
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-10-14T00:00:00.000Z
Reasoning: The good silver grade enhances the polymetallic nature of this bonanza-grade intercept, contributing significantly to the overall value of the step-out discovery.
Positive factors
- Good silver grade adding to polymetallic value
- Exceptional grade over a narrow but significant interval
- True width estimated at 90% of downhole length
Evidence · table
“27.2”
Context: 0.98
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 0.882
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "- 1.4m of 9 g/t Ag, **0.49% Cu** - Four rigs continue to drill at Ballywire, with a fifth rig drilling at the Company's"
26-2654-04Ballywire · copperGrade: 0.02Grade Unit: %Intercept: 0.98 mView all detailsHide details
Identity
- Hole ID
- 26-2654-04
- Project
- Ballywire
- Commodity
- copper
- Region
- ireland
- Reported Region
- ireland
- Ticker
- ZNG.V
Geometry
- Grade
- 0.02
- Grade Unit
- %
- Intercept
- 0.98 m
- True Width
- 0.882 m
- From
- 444.31 m
- To
- 445.29 m
- Intercept Depth
- 433.95 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- 26-2654-04:444.31-445.29
QA/QC
- Laboratory
- ALS Laboratories
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-10-14T00:00:00.000Z
Reasoning: While the copper grade is very low, its presence in this bonanza-grade polymetallic intercept is noted as part of the overall mineral assemblage.
Positive factors
- Presence of copper, indicating polymetallic mineralization
- True width estimated at 90% of downhole length
Negative factors
- Very low copper grade
Evidence · table
“0.02”
Context: 0.98
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 0.882
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "- 1.4m of 9 g/t Ag, **0.49% Cu** - Four rigs continue to drill at Ballywire, with a fifth rig drilling at the Company's"
26-2654-04Ballywire · zincGrade: 0.01Grade Unit: %Intercept: 10.06 mView all detailsHide details
Identity
- Hole ID
- 26-2654-04
- Project
- Ballywire
- Commodity
- zinc
- Region
- ireland
- Reported Region
- ireland
- Ticker
- ZNG.V
Geometry
- Grade
- 0.01
- Grade Unit
- %
- Intercept
- 10.06 m
- True Width
- 6.036 m
- From
- 592.66 m
- To
- 602.72 m
- Intercept Depth
- 592.66 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- 26-2654-04:592.66-602.72
QA/QC
- Laboratory
- ALS Laboratories
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-10-14T00:00:00.000Z
Reasoning: While the zinc grade is very low, this intercept indicates a broad zone of mineralization, primarily copper-silver, in the step-out area.
Positive factors
- Significant intercept length in a step-out hole
- True width estimated at 60% of downhole length
Negative factors
- Very low zinc grade
Evidence · table
“0.01”
Context: 10.06
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 6.036
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "- 1.4m of 9 g/t Ag, **0.49% Cu** - Four rigs continue to drill at Ballywire, with a fifth rig drilling at the Company's"
26-2654-04Ballywire · leadGrade: 0.01Grade Unit: %Intercept: 10.06 mView all detailsHide details
Identity
- Hole ID
- 26-2654-04
- Project
- Ballywire
- Commodity
- lead
- Region
- ireland
- Reported Region
- ireland
- Ticker
- ZNG.V
Geometry
- Grade
- 0.01
- Grade Unit
- %
- Intercept
- 10.06 m
- True Width
- 6.036 m
- From
- 592.66 m
- To
- 602.72 m
- Intercept Depth
- 592.66 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- 26-2654-04:592.66-602.72
QA/QC
- Laboratory
- ALS Laboratories
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-10-14T00:00:00.000Z
Reasoning: While the lead grade is very low, this intercept indicates a broad zone of mineralization, primarily copper-silver, in the step-out area.
Positive factors
- Significant intercept length in a step-out hole
- True width estimated at 60% of downhole length
Negative factors
- Very low lead grade
Evidence · table
“0.01”
Context: 10.06
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 6.036
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "- 1.4m of 9 g/t Ag, **0.49% Cu** - Four rigs continue to drill at Ballywire, with a fifth rig drilling at the Company's"
26-2654-04Ballywire · silverGrade: 7.6Grade Unit: g/tIntercept: 10.06 mView all detailsHide details
Identity
- Hole ID
- 26-2654-04
- Project
- Ballywire
- Commodity
- silver
- Region
- ireland
- Reported Region
- ireland
- Ticker
- ZNG.V
Geometry
- Grade
- 7.6
- Grade Unit
- g/t
- Intercept
- 10.06 m
- True Width
- 6.036 m
- From
- 592.66 m
- To
- 602.72 m
- Intercept Depth
- 592.66 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- 26-2654-04:592.66-602.72
QA/QC
- Laboratory
- ALS Laboratories
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-10-14T00:00:00.000Z
Reasoning: This moderate silver grade over a significant width contributes to the polymetallic nature of the deeper mineralization in the step-out hole.
Positive factors
- Moderate silver grade over a significant width
- True width estimated at 60% of downhole length
Evidence · table
“7.6”
Context: 10.06
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 6.036
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "- 1.4m of 9 g/t Ag, **0.49% Cu** - Four rigs continue to drill at Ballywire, with a fifth rig drilling at the Company's"
26-2654-04Ballywire · copperGrade: 0.14Grade Unit: %Intercept: 10.06 mView all detailsHide details
Identity
- Hole ID
- 26-2654-04
- Project
- Ballywire
- Commodity
- copper
- Region
- ireland
- Reported Region
- ireland
- Ticker
- ZNG.V
Geometry
- Grade
- 0.14
- Grade Unit
- %
- Intercept
- 10.06 m
- True Width
- 6.036 m
- From
- 592.66 m
- To
- 602.72 m
- Intercept Depth
- 592.66 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- 26-2654-04:592.66-602.72
QA/QC
- Laboratory
- ALS Laboratories
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-10-14T00:00:00.000Z
Reasoning: This moderate copper grade over a significant width contributes to the polymetallic nature of the deeper mineralization in the step-out hole.
Positive factors
- Moderate copper grade over a significant width
- True width estimated at 60% of downhole length
Evidence · table
“0.14”
Context: 10.06
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 6.036
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "- 1.4m of 9 g/t Ag, **0.49% Cu** - Four rigs continue to drill at Ballywire, with a fifth rig drilling at the Company's"
26-2654-04Ballywire · zincGrade: 0.01Grade Unit: %Intercept: 6.32 mView all detailsHide details
Identity
- Hole ID
- 26-2654-04
- Project
- Ballywire
- Commodity
- zinc
- Region
- ireland
- Reported Region
- ireland
- Ticker
- ZNG.V
Geometry
- Grade
- 0.01
- Grade Unit
- %
- Intercept
- 6.32 m
- True Width
- 3.792 m
- From
- 593.58 m
- To
- 599.9 m
- Intercept Depth
- 592.66 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- 26-2654-04:593.58-599.9
QA/QC
- Laboratory
- ALS Laboratories
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-10-14T00:00:00.000Z
Reasoning: While the zinc grade is very low, this intercept indicates a continuous zone of copper-silver mineralization at depth in the step-out hole.
Positive factors
- Good intercept length for deeper mineralization
- True width estimated at 60% of downhole length
Negative factors
- Very low zinc grade
Evidence · table
“0.01”
Context: 6.32
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 3.792
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "- 1.4m of 9 g/t Ag, **0.49% Cu** - Four rigs continue to drill at Ballywire, with a fifth rig drilling at the Company's"
26-2654-04Ballywire · silverGrade: 10.9Grade Unit: g/tIntercept: 6.32 mView all detailsHide details
Identity
- Hole ID
- 26-2654-04
- Project
- Ballywire
- Commodity
- silver
- Region
- ireland
- Reported Region
- ireland
- Ticker
- ZNG.V
Geometry
- Grade
- 10.9
- Grade Unit
- g/t
- Intercept
- 6.32 m
- True Width
- 3.792 m
- From
- 593.58 m
- To
- 599.9 m
- Intercept Depth
- 592.66 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- 26-2654-04:593.58-599.9
QA/QC
- Laboratory
- ALS Laboratories
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-10-14T00:00:00.000Z
Reasoning: This good silver grade over a significant width enhances the polymetallic nature of the deeper mineralization in the step-out hole.
Positive factors
- Good silver grade over a significant width
- True width estimated at 60% of downhole length
Evidence · table
“10.9”
Context: 6.32
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 3.792
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "- 1.4m of 9 g/t Ag, **0.49% Cu** - Four rigs continue to drill at Ballywire, with a fifth rig drilling at the Company's"
26-2654-04Ballywire · copperGrade: 0.2Grade Unit: %Intercept: 6.32 mView all detailsHide details
Identity
- Hole ID
- 26-2654-04
- Project
- Ballywire
- Commodity
- copper
- Region
- ireland
- Reported Region
- ireland
- Ticker
- ZNG.V
Geometry
- Grade
- 0.2
- Grade Unit
- %
- Intercept
- 6.32 m
- True Width
- 3.792 m
- From
- 593.58 m
- To
- 599.9 m
- Intercept Depth
- 592.66 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- 26-2654-04:593.58-599.9
QA/QC
- Laboratory
- ALS Laboratories
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-10-14T00:00:00.000Z
Reasoning: This good copper grade over a significant width enhances the polymetallic nature of the deeper mineralization in the step-out hole.
Positive factors
- Good copper grade over a significant width
- True width estimated at 60% of downhole length
Evidence · table
“0.20”
Context: 6.32
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 3.792
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "- 1.4m of 9 g/t Ag, **0.49% Cu** - Four rigs continue to drill at Ballywire, with a fifth rig drilling at the Company's"
26-2654-04Ballywire · antimonyGrade: 0.01Grade Unit: %Intercept: 6.32 mView all detailsHide details
Identity
- Hole ID
- 26-2654-04
- Project
- Ballywire
- Commodity
- antimony
- Region
- ireland
- Reported Region
- ireland
- Ticker
- ZNG.V
Geometry
- Grade
- 0.01
- Grade Unit
- %
- Intercept
- 6.32 m
- True Width
- 3.792 m
- From
- 593.58 m
- To
- 599.9 m
- Intercept Depth
- 592.66 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- 26-2654-04:593.58-599.9
QA/QC
- Laboratory
- ALS Laboratories
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-10-14T00:00:00.000Z
Reasoning: The presence of antimony, even at a low grade, contributes to the polymetallic nature of the deeper mineralization in the step-out hole.
Positive factors
- Presence of antimony, indicating polymetallic mineralization
- True width estimated at 60% of downhole length
Negative factors
- Low antimony grade
Evidence · table
“0.01”
Context: 6.32
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 3.792
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "- 1.4m of 9 g/t Ag, **0.49% Cu** - Four rigs continue to drill at Ballywire, with a fifth rig drilling at the Company's"
26-2654-04Ballywire · zincGrade: 0.01Grade Unit: %Intercept: 1.65 mView all detailsHide details
Identity
- Hole ID
- 26-2654-04
- Project
- Ballywire
- Commodity
- zinc
- Region
- ireland
- Reported Region
- ireland
- Ticker
- ZNG.V
Geometry
- Grade
- 0.01
- Grade Unit
- %
- Intercept
- 1.65 m
- True Width
- 0.99 m
- From
- 598.25 m
- To
- 599.9 m
- Intercept Depth
- 592.66 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- 26-2654-04:598.25-599.9
QA/QC
- Laboratory
- ALS Laboratories
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-10-14T00:00:00.000Z
Reasoning: While the zinc grade is very low, this narrow intercept shows a higher-grade copper-silver zone within the deeper mineralization.
Positive factors
- True width estimated at 60% of downhole length
Negative factors
- Very low zinc grade
- Narrow intercept
Evidence · table
“0.01”
Context: 1.65
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 0.99
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "- 1.4m of 9 g/t Ag, **0.49% Cu** - Four rigs continue to drill at Ballywire, with a fifth rig drilling at the Company's"
26-2654-04Ballywire · silverGrade: 29.5Grade Unit: g/tIntercept: 1.65 mView all detailsHide details
Identity
- Hole ID
- 26-2654-04
- Project
- Ballywire
- Commodity
- silver
- Region
- ireland
- Reported Region
- ireland
- Ticker
- ZNG.V
Geometry
- Grade
- 29.5
- Grade Unit
- g/t
- Intercept
- 1.65 m
- True Width
- 0.99 m
- From
- 598.25 m
- To
- 599.9 m
- Intercept Depth
- 592.66 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- 26-2654-04:598.25-599.9
QA/QC
- Laboratory
- ALS Laboratories
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-10-14T00:00:00.000Z
Reasoning: This high-grade silver intercept significantly enhances the polymetallic nature of the deeper mineralization, indicating a valuable zone.
Positive factors
- High-grade silver over a good width for deeper mineralization
- True width estimated at 60% of downhole length
Evidence · table
“29.5”
Context: 1.65
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 0.99
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "- 1.4m of 9 g/t Ag, **0.49% Cu** - Four rigs continue to drill at Ballywire, with a fifth rig drilling at the Company's"
26-2654-04Ballywire · copperGrade: 0.7Grade Unit: %Intercept: 1.65 mView all detailsHide details
Identity
- Hole ID
- 26-2654-04
- Project
- Ballywire
- Commodity
- copper
- Region
- ireland
- Reported Region
- ireland
- Ticker
- ZNG.V
Geometry
- Grade
- 0.7
- Grade Unit
- %
- Intercept
- 1.65 m
- True Width
- 0.99 m
- From
- 598.25 m
- To
- 599.9 m
- Intercept Depth
- 592.66 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- 26-2654-04:598.25-599.9
QA/QC
- Laboratory
- ALS Laboratories
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-10-14T00:00:00.000Z
Reasoning: This high-grade copper intercept significantly enhances the polymetallic nature of the deeper mineralization, indicating a valuable zone.
Positive factors
- High-grade copper over a good width for deeper mineralization
- True width estimated at 60% of downhole length
Evidence · table
“0.70”
Context: 1.65
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 0.99
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "- 1.4m of 9 g/t Ag, **0.49% Cu** - Four rigs continue to drill at Ballywire, with a fifth rig drilling at the Company's"
26-2654-04Ballywire · antimonyGrade: 0.02Grade Unit: %Intercept: 1.65 mView all detailsHide details
Identity
- Hole ID
- 26-2654-04
- Project
- Ballywire
- Commodity
- antimony
- Region
- ireland
- Reported Region
- ireland
- Ticker
- ZNG.V
Geometry
- Grade
- 0.02
- Grade Unit
- %
- Intercept
- 1.65 m
- True Width
- 0.99 m
- From
- 598.25 m
- To
- 599.9 m
- Intercept Depth
- 592.66 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- 26-2654-04:598.25-599.9
QA/QC
- Laboratory
- ALS Laboratories
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-10-14T00:00:00.000Z
Reasoning: The presence of antimony, even at a low grade, contributes to the polymetallic nature of this higher-grade deeper mineralization.
Positive factors
- Presence of antimony, indicating polymetallic mineralization
- True width estimated at 60% of downhole length
Negative factors
- Low antimony grade
Evidence · table
“0.02”
Context: 1.65
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 0.99
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "- 1.4m of 9 g/t Ag, **0.49% Cu** - Four rigs continue to drill at Ballywire, with a fifth rig drilling at the Company's"
26-2654-04Ballywire · zincGrade: 0.01Grade Unit: %Intercept: 0.85 mView all detailsHide details
Identity
- Hole ID
- 26-2654-04
- Project
- Ballywire
- Commodity
- zinc
- Region
- ireland
- Reported Region
- ireland
- Ticker
- ZNG.V
Geometry
- Grade
- 0.01
- Grade Unit
- %
- Intercept
- 0.85 m
- True Width
- 0.51 m
- From
- 598.25 m
- To
- 599.1 m
- Intercept Depth
- 592.66 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- 26-2654-04:598.25-599.1
QA/QC
- Laboratory
- ALS Laboratories
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-10-14T00:00:00.000Z
Reasoning: While the zinc grade is very low, this very narrow intercept shows the highest-grade copper-silver zone within the deeper mineralization.
Positive factors
- True width estimated at 60% of downhole length
Negative factors
- Very low zinc grade
- Narrow intercept
Evidence · table
“0.01”
Context: 0.85
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 0.51
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "- 1.4m of 9 g/t Ag, **0.49% Cu** - Four rigs continue to drill at Ballywire, with a fifth rig drilling at the Company's"
26-2654-04Ballywire · silverGrade: 29.6Grade Unit: g/tIntercept: 0.85 mView all detailsHide details
Identity
- Hole ID
- 26-2654-04
- Project
- Ballywire
- Commodity
- silver
- Region
- ireland
- Reported Region
- ireland
- Ticker
- ZNG.V
Geometry
- Grade
- 29.6
- Grade Unit
- g/t
- Intercept
- 0.85 m
- True Width
- 0.51 m
- From
- 598.25 m
- To
- 599.1 m
- Intercept Depth
- 592.66 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- 26-2654-04:598.25-599.1
QA/QC
- Laboratory
- ALS Laboratories
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-10-14T00:00:00.000Z
Reasoning: This high-grade silver intercept further enhances the polymetallic nature of the deeper mineralization, indicating a valuable, concentrated zone.
Positive factors
- High-grade silver over a narrow but significant interval for deeper mineralization
- True width estimated at 60% of downhole length
Evidence · table
“29.6”
Context: 0.85
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 0.51
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "- 1.4m of 9 g/t Ag, **0.49% Cu** - Four rigs continue to drill at Ballywire, with a fifth rig drilling at the Company's"
26-2654-04Ballywire · copperGrade: 1.17Grade Unit: %Intercept: 0.85 mView all detailsHide details
Identity
- Hole ID
- 26-2654-04
- Project
- Ballywire
- Commodity
- copper
- Region
- ireland
- Reported Region
- ireland
- Ticker
- ZNG.V
Geometry
- Grade
- 1.17
- Grade Unit
- %
- Intercept
- 0.85 m
- True Width
- 0.51 m
- From
- 598.25 m
- To
- 599.1 m
- Intercept Depth
- 592.66 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- 26-2654-04:598.25-599.1
QA/QC
- Laboratory
- ALS Laboratories
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-10-14T00:00:00.000Z
Reasoning: This very high-grade copper intercept further enhances the polymetallic nature of the deeper mineralization, indicating a valuable, concentrated zone.
Positive factors
- Very high-grade copper over a narrow but significant interval for deeper mineralization
- True width estimated at 60% of downhole length
Evidence · table
“1.17”
Context: 0.85
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 0.51
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "- 1.4m of 9 g/t Ag, **0.49% Cu** - Four rigs continue to drill at Ballywire, with a fifth rig drilling at the Company's"
26-2654-04Ballywire · antimonyGrade: 0.03Grade Unit: %Intercept: 0.85 mView all detailsHide details
Identity
- Hole ID
- 26-2654-04
- Project
- Ballywire
- Commodity
- antimony
- Region
- ireland
- Reported Region
- ireland
- Ticker
- ZNG.V
Geometry
- Grade
- 0.03
- Grade Unit
- %
- Intercept
- 0.85 m
- True Width
- 0.51 m
- From
- 598.25 m
- To
- 599.1 m
- Intercept Depth
- 592.66 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- 26-2654-04:598.25-599.1
QA/QC
- Laboratory
- ALS Laboratories
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-10-14T00:00:00.000Z
Reasoning: The presence of antimony, even at a low grade, contributes to the polymetallic nature of this very high-grade deeper mineralization.
Positive factors
- Presence of antimony, indicating polymetallic mineralization
- True width estimated at 60% of downhole length
Negative factors
- Low antimony grade
Evidence · table
“0.03”
Context: 0.85
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 0.51
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "- 1.4m of 9 g/t Ag, **0.49% Cu** - Four rigs continue to drill at Ballywire, with a fifth rig drilling at the Company's"
26-2654-04Ballywire · zincGrade: 0.01Grade Unit: %Intercept: 4.46 mView all detailsHide details
Identity
- Hole ID
- 26-2654-04
- Project
- Ballywire
- Commodity
- zinc
- Region
- ireland
- Reported Region
- ireland
- Ticker
- ZNG.V
Geometry
- Grade
- 0.01
- Grade Unit
- %
- Intercept
- 4.46 m
- True Width
- 2.676 m
- From
- 690.66 m
- To
- 695.12 m
- Intercept Depth
- 690.66 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- 26-2654-04:690.66-695.12
QA/QC
- Laboratory
- ALS Laboratories
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-10-14T00:00:00.000Z
Reasoning: While the zinc grade is very low, this intercept indicates another zone of copper-silver mineralization at greater depth in the step-out hole.
Positive factors
- Good intercept length for deeper mineralization
- True width estimated at 60% of downhole length
Negative factors
- Very low zinc grade
Evidence · table
“0.01”
Context: 4.46
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 2.676
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "- 1.4m of 9 g/t Ag, **0.49% Cu** - Four rigs continue to drill at Ballywire, with a fifth rig drilling at the Company's"
26-2654-04Ballywire · silverGrade: 7.8Grade Unit: g/tIntercept: 4.46 mView all detailsHide details
Identity
- Hole ID
- 26-2654-04
- Project
- Ballywire
- Commodity
- silver
- Region
- ireland
- Reported Region
- ireland
- Ticker
- ZNG.V
Geometry
- Grade
- 7.8
- Grade Unit
- g/t
- Intercept
- 4.46 m
- True Width
- 2.676 m
- From
- 690.66 m
- To
- 695.12 m
- Intercept Depth
- 690.66 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- 26-2654-04:690.66-695.12
QA/QC
- Laboratory
- ALS Laboratories
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-10-14T00:00:00.000Z
Reasoning: This moderate silver grade over a good width contributes to the polymetallic nature of the deeper mineralization in the step-out hole.
Positive factors
- Moderate silver grade over a good width for deeper mineralization
- True width estimated at 60% of downhole length
Evidence · table
“7.8”
Context: 4.46
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 2.676
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "- 1.4m of 9 g/t Ag, **0.49% Cu** - Four rigs continue to drill at Ballywire, with a fifth rig drilling at the Company's"
26-2654-04Ballywire · copperGrade: 0.24Grade Unit: %Intercept: 4.46 mView all detailsHide details
Identity
- Hole ID
- 26-2654-04
- Project
- Ballywire
- Commodity
- copper
- Region
- ireland
- Reported Region
- ireland
- Ticker
- ZNG.V
Geometry
- Grade
- 0.24
- Grade Unit
- %
- Intercept
- 4.46 m
- True Width
- 2.676 m
- From
- 690.66 m
- To
- 695.12 m
- Intercept Depth
- 690.66 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- 26-2654-04:690.66-695.12
QA/QC
- Laboratory
- ALS Laboratories
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-10-14T00:00:00.000Z
Reasoning: This good copper grade over a good width contributes to the polymetallic nature of the deeper mineralization in the step-out hole.
Positive factors
- Good copper grade over a good width for deeper mineralization
- True width estimated at 60% of downhole length
Evidence · table
“0.24”
Context: 4.46
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 2.676
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "- 1.4m of 9 g/t Ag, **0.49% Cu** - Four rigs continue to drill at Ballywire, with a fifth rig drilling at the Company's"
26-2654-04Ballywire · antimonyGrade: 0.04Grade Unit: %Intercept: 4.46 mView all detailsHide details
Identity
- Hole ID
- 26-2654-04
- Project
- Ballywire
- Commodity
- antimony
- Region
- ireland
- Reported Region
- ireland
- Ticker
- ZNG.V
Geometry
- Grade
- 0.04
- Grade Unit
- %
- Intercept
- 4.46 m
- True Width
- 2.676 m
- From
- 690.66 m
- To
- 695.12 m
- Intercept Depth
- 690.66 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- 26-2654-04:690.66-695.12
QA/QC
- Laboratory
- ALS Laboratories
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-10-14T00:00:00.000Z
Reasoning: The presence of antimony, even at a low grade, contributes to the polymetallic nature of the deeper mineralization in the step-out hole.
Positive factors
- Presence of antimony, indicating polymetallic mineralization
- True width estimated at 60% of downhole length
Negative factors
- Low antimony grade
Evidence · table
“0.04”
Context: 4.46
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 2.676
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "- 1.4m of 9 g/t Ag, **0.49% Cu** - Four rigs continue to drill at Ballywire, with a fifth rig drilling at the Company's"
26-2654-04Ballywire · zincGrade: 0.02Grade Unit: %Intercept: 2.49 mView all detailsHide details
Identity
- Hole ID
- 26-2654-04
- Project
- Ballywire
- Commodity
- zinc
- Region
- ireland
- Reported Region
- ireland
- Ticker
- ZNG.V
Geometry
- Grade
- 0.02
- Grade Unit
- %
- Intercept
- 2.49 m
- True Width
- 1.494 m
- From
- 690.66 m
- To
- 693.15 m
- Intercept Depth
- 690.66 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- 26-2654-04:690.66-693.15
QA/QC
- Laboratory
- ALS Laboratories
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-10-14T00:00:00.000Z
Reasoning: While the zinc grade is very low, this narrow intercept shows a higher-grade copper-silver zone within the deeper mineralization.
Positive factors
- True width estimated at 60% of downhole length
Negative factors
- Very low zinc grade
- Narrow intercept
Evidence · table
“0.02”
Context: 2.49
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 1.494
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "- 1.4m of 9 g/t Ag, **0.49% Cu** - Four rigs continue to drill at Ballywire, with a fifth rig drilling at the Company's"
26-2654-04Ballywire · silverGrade: 9.7Grade Unit: g/tIntercept: 2.49 mView all detailsHide details
Identity
- Hole ID
- 26-2654-04
- Project
- Ballywire
- Commodity
- silver
- Region
- ireland
- Reported Region
- ireland
- Ticker
- ZNG.V
Geometry
- Grade
- 9.7
- Grade Unit
- g/t
- Intercept
- 2.49 m
- True Width
- 1.494 m
- From
- 690.66 m
- To
- 693.15 m
- Intercept Depth
- 690.66 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- 26-2654-04:690.66-693.15
QA/QC
- Laboratory
- ALS Laboratories
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-10-14T00:00:00.000Z
Reasoning: This good silver grade over a good width enhances the polymetallic nature of the deeper mineralization, indicating a valuable zone.
Positive factors
- Good silver grade over a good width for deeper mineralization
- True width estimated at 60% of downhole length
Evidence · table
“9.7”
Context: 2.49
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 1.494
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "- 1.4m of 9 g/t Ag, **0.49% Cu** - Four rigs continue to drill at Ballywire, with a fifth rig drilling at the Company's"
26-2654-04Ballywire · copperGrade: 0.32Grade Unit: %Intercept: 2.49 mView all detailsHide details
Identity
- Hole ID
- 26-2654-04
- Project
- Ballywire
- Commodity
- copper
- Region
- ireland
- Reported Region
- ireland
- Ticker
- ZNG.V
Geometry
- Grade
- 0.32
- Grade Unit
- %
- Intercept
- 2.49 m
- True Width
- 1.494 m
- From
- 690.66 m
- To
- 693.15 m
- Intercept Depth
- 690.66 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- 26-2654-04:690.66-693.15
QA/QC
- Laboratory
- ALS Laboratories
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-10-14T00:00:00.000Z
Reasoning: This high-grade copper intercept significantly enhances the polymetallic nature of the deeper mineralization, indicating a valuable zone.
Positive factors
- High-grade copper over a good width for deeper mineralization
- True width estimated at 60% of downhole length
Evidence · table
“0.32”
Context: 2.49
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 1.494
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "- 1.4m of 9 g/t Ag, **0.49% Cu** - Four rigs continue to drill at Ballywire, with a fifth rig drilling at the Company's"
26-2654-04Ballywire · antimonyGrade: 0.06Grade Unit: %Intercept: 2.49 mView all detailsHide details
Identity
- Hole ID
- 26-2654-04
- Project
- Ballywire
- Commodity
- antimony
- Region
- ireland
- Reported Region
- ireland
- Ticker
- ZNG.V
Geometry
- Grade
- 0.06
- Grade Unit
- %
- Intercept
- 2.49 m
- True Width
- 1.494 m
- From
- 690.66 m
- To
- 693.15 m
- Intercept Depth
- 690.66 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- 26-2654-04:690.66-693.15
QA/QC
- Laboratory
- ALS Laboratories
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-10-14T00:00:00.000Z
Reasoning: The presence of antimony, even at a low grade, contributes to the polymetallic nature of this higher-grade deeper mineralization.
Positive factors
- Presence of antimony, indicating polymetallic mineralization
- True width estimated at 60% of downhole length
Negative factors
- Low antimony grade
Evidence · table
“0.06”
Context: 2.49
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 1.494
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "- 1.4m of 9 g/t Ag, **0.49% Cu** - Four rigs continue to drill at Ballywire, with a fifth rig drilling at the Company's"
26-2654-04Ballywire · zincGrade: 0.02Grade Unit: %Intercept: 1.18 mView all detailsHide details
Identity
- Hole ID
- 26-2654-04
- Project
- Ballywire
- Commodity
- zinc
- Region
- ireland
- Reported Region
- ireland
- Ticker
- ZNG.V
Geometry
- Grade
- 0.02
- Grade Unit
- %
- Intercept
- 1.18 m
- True Width
- 0.708 m
- From
- 690.66 m
- To
- 691.84 m
- Intercept Depth
- 690.66 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- 26-2654-04:690.66-691.84
QA/QC
- Laboratory
- ALS Laboratories
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-10-14T00:00:00.000Z
Reasoning: While the zinc grade is very low, this very narrow intercept shows the highest-grade copper-silver zone within the deeper mineralization.
Positive factors
- True width estimated at 60% of downhole length
Negative factors
- Very low zinc grade
- Narrow intercept
Evidence · table
“0.02”
Context: 1.18
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 0.708
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "- 1.4m of 9 g/t Ag, **0.49% Cu** - Four rigs continue to drill at Ballywire, with a fifth rig drilling at the Company's"
26-2654-04Ballywire · silverGrade: 11.8Grade Unit: g/tIntercept: 1.18 mView all detailsHide details
Identity
- Hole ID
- 26-2654-04
- Project
- Ballywire
- Commodity
- silver
- Region
- ireland
- Reported Region
- ireland
- Ticker
- ZNG.V
Geometry
- Grade
- 11.8
- Grade Unit
- g/t
- Intercept
- 1.18 m
- True Width
- 0.708 m
- From
- 690.66 m
- To
- 691.84 m
- Intercept Depth
- 690.66 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- 26-2654-04:690.66-691.84
QA/QC
- Laboratory
- ALS Laboratories
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-10-14T00:00:00.000Z
Reasoning: This good silver grade over a narrow but significant width further enhances the polymetallic nature of the deeper mineralization, indicating a valuable, concentrated zone.
Positive factors
- Good silver grade over a narrow but significant interval for deeper mineralization
- True width estimated at 60% of downhole length
Evidence · table
“11.8”
Context: 1.18
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 0.708
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "- 1.4m of 9 g/t Ag, **0.49% Cu** - Four rigs continue to drill at Ballywire, with a fifth rig drilling at the Company's"
26-2654-04Ballywire · copperGrade: 0.37Grade Unit: %Intercept: 1.18 mView all detailsHide details
Identity
- Hole ID
- 26-2654-04
- Project
- Ballywire
- Commodity
- copper
- Region
- ireland
- Reported Region
- ireland
- Ticker
- ZNG.V
Geometry
- Grade
- 0.37
- Grade Unit
- %
- Intercept
- 1.18 m
- True Width
- 0.708 m
- From
- 690.66 m
- To
- 691.84 m
- Intercept Depth
- 690.66 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- 26-2654-04:690.66-691.84
QA/QC
- Laboratory
- ALS Laboratories
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-10-14T00:00:00.000Z
Reasoning: This high-grade copper intercept further enhances the polymetallic nature of the deeper mineralization, indicating a valuable, concentrated zone.
Positive factors
- High-grade copper over a narrow but significant interval for deeper mineralization
- True width estimated at 60% of downhole length
Evidence · table
“0.37”
Context: 1.18
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 0.708
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "- 1.4m of 9 g/t Ag, **0.49% Cu** - Four rigs continue to drill at Ballywire, with a fifth rig drilling at the Company's"
26-2654-04Ballywire · antimonyGrade: 0.06Grade Unit: %Intercept: 1.18 mView all detailsHide details
Identity
- Hole ID
- 26-2654-04
- Project
- Ballywire
- Commodity
- antimony
- Region
- ireland
- Reported Region
- ireland
- Ticker
- ZNG.V
Geometry
- Grade
- 0.06
- Grade Unit
- %
- Intercept
- 1.18 m
- True Width
- 0.708 m
- From
- 690.66 m
- To
- 691.84 m
- Intercept Depth
- 690.66 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- 26-2654-04:690.66-691.84
QA/QC
- Laboratory
- ALS Laboratories
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-10-14T00:00:00.000Z
Reasoning: The presence of antimony, even at a low grade, contributes to the polymetallic nature of this higher-grade deeper mineralization.
Positive factors
- Presence of antimony, indicating polymetallic mineralization
- True width estimated at 60% of downhole length
Negative factors
- Low antimony grade
Evidence · table
“0.06”
Context: 1.18
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 0.708
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "- 1.4m of 9 g/t Ag, **0.49% Cu** - Four rigs continue to drill at Ballywire, with a fifth rig drilling at the Company's"
26-2654-04Ballywire · zincGrade: 0.01Grade Unit: %Intercept: 0.5 mView all detailsHide details
Identity
- Hole ID
- 26-2654-04
- Project
- Ballywire
- Commodity
- zinc
- Region
- ireland
- Reported Region
- ireland
- Ticker
- ZNG.V
Geometry
- Grade
- 0.01
- Grade Unit
- %
- Intercept
- 0.5 m
- True Width
- 0.3 m
- From
- 725.54 m
- To
- 726.04 m
- Intercept Depth
- 725.54 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- 26-2654-04:725.54-726.04
QA/QC
- Laboratory
- ALS Laboratories
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-10-14T00:00:00.000Z
Reasoning: While the zinc grade is very low, this very narrow intercept indicates the presence of mineralization at even greater depth.
Positive factors
- True width estimated at 60% of downhole length
Negative factors
- Very low zinc grade
- Very narrow intercept
Evidence · table
“0.01”
Context: 0.50
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 0.3
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "- 1.4m of 9 g/t Ag, **0.49% Cu** - Four rigs continue to drill at Ballywire, with a fifth rig drilling at the Company's"
26-2654-04Ballywire · leadGrade: 0.01Grade Unit: %Intercept: 0.5 mView all detailsHide details
Identity
- Hole ID
- 26-2654-04
- Project
- Ballywire
- Commodity
- lead
- Region
- ireland
- Reported Region
- ireland
- Ticker
- ZNG.V
Geometry
- Grade
- 0.01
- Grade Unit
- %
- Intercept
- 0.5 m
- True Width
- 0.3 m
- From
- 725.54 m
- To
- 726.04 m
- Intercept Depth
- 725.54 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- 26-2654-04:725.54-726.04
QA/QC
- Laboratory
- ALS Laboratories
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-10-14T00:00:00.000Z
Reasoning: While the lead grade is very low, this very narrow intercept indicates the presence of mineralization at even greater depth.
Positive factors
- True width estimated at 60% of downhole length
Negative factors
- Very low lead grade
- Very narrow intercept
Evidence · table
“0.01”
Context: 0.50
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 0.3
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "- 1.4m of 9 g/t Ag, **0.49% Cu** - Four rigs continue to drill at Ballywire, with a fifth rig drilling at the Company's"
26-2654-04Ballywire · silverGrade: 9.5Grade Unit: g/tIntercept: 0.5 mView all detailsHide details
Identity
- Hole ID
- 26-2654-04
- Project
- Ballywire
- Commodity
- silver
- Region
- ireland
- Reported Region
- ireland
- Ticker
- ZNG.V
Geometry
- Grade
- 9.5
- Grade Unit
- g/t
- Intercept
- 0.5 m
- True Width
- 0.3 m
- From
- 725.54 m
- To
- 726.04 m
- Intercept Depth
- 725.54 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- 26-2654-04:725.54-726.04
QA/QC
- Laboratory
- ALS Laboratories
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-10-14T00:00:00.000Z
Reasoning: This moderate silver grade in a very deep, narrow intercept indicates the persistence of mineralization to significant depths.
Positive factors
- Moderate silver grade in a very deep intercept
- True width estimated at 60% of downhole length
Negative factors
- Very narrow intercept
Evidence · table
“9.5”
Context: 0.50
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 0.3
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "- 1.4m of 9 g/t Ag, **0.49% Cu** - Four rigs continue to drill at Ballywire, with a fifth rig drilling at the Company's"
26-2654-04Ballywire · copperGrade: 0.21Grade Unit: %Intercept: 0.5 mView all detailsHide details
Identity
- Hole ID
- 26-2654-04
- Project
- Ballywire
- Commodity
- copper
- Region
- ireland
- Reported Region
- ireland
- Ticker
- ZNG.V
Geometry
- Grade
- 0.21
- Grade Unit
- %
- Intercept
- 0.5 m
- True Width
- 0.3 m
- From
- 725.54 m
- To
- 726.04 m
- Intercept Depth
- 725.54 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- 26-2654-04:725.54-726.04
QA/QC
- Laboratory
- ALS Laboratories
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-10-14T00:00:00.000Z
Reasoning: This good copper grade in a very deep, narrow intercept indicates the persistence of mineralization to significant depths.
Positive factors
- Good copper grade in a very deep intercept
- True width estimated at 60% of downhole length
Negative factors
- Very narrow intercept
Evidence · table
“0.21”
Context: 0.50
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 0.3
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "- 1.4m of 9 g/t Ag, **0.49% Cu** - Four rigs continue to drill at Ballywire, with a fifth rig drilling at the Company's"
26-468-26Ballywire · zincGrade: 9.05Grade Unit: %Intercept: 0.27 mView all detailsHide details
Identity
- Hole ID
- 26-468-26
- Project
- Ballywire
- Commodity
- zinc
- Region
- ireland
- Reported Region
- ireland
- Ticker
- ZNG.V
Geometry
- Grade
- 9.05
- Grade Unit
- %
- Intercept
- 0.27 m
- True Width
- 0.243 m
- From
- 197.31 m
- To
- 197.58 m
- Intercept Depth
- 197.31 m
Classification
- Program
- mixed
- Sample Type
- drill
- Group ID
- 26-468-26:197.31-197.58
QA/QC
- Laboratory
- ALS Laboratories
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-10-14T00:00:00.000Z
Reasoning: This high-grade zinc intercept, though very narrow, indicates the presence of strong mineralization within the gap-filling hole.
Positive factors
- High-grade zinc intercept
- True width estimated at 90% of downhole length
Negative factors
- Very narrow intercept
Evidence · table
“9.05”
Context: 0.27
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 0.243
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "- 1.4m of 9 g/t Ag, **0.49% Cu** - Four rigs continue to drill at Ballywire, with a fifth rig drilling at the Company's"
26-468-26Ballywire · leadGrade: 0.02Grade Unit: %Intercept: 0.27 mView all detailsHide details
Identity
- Hole ID
- 26-468-26
- Project
- Ballywire
- Commodity
- lead
- Region
- ireland
- Reported Region
- ireland
- Ticker
- ZNG.V
Geometry
- Grade
- 0.02
- Grade Unit
- %
- Intercept
- 0.27 m
- True Width
- 0.243 m
- From
- 197.31 m
- To
- 197.58 m
- Intercept Depth
- 197.31 m
Classification
- Program
- mixed
- Sample Type
- drill
- Group ID
- 26-468-26:197.31-197.58
QA/QC
- Laboratory
- ALS Laboratories
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-10-14T00:00:00.000Z
Reasoning: While the lead grade is very low, its presence is noted in this high-grade zinc intercept.
Positive factors
- True width estimated at 90% of downhole length
Negative factors
- Very low lead grade
- Very narrow intercept
Evidence · table
“0.02”
Context: 0.27
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 0.243
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "- 1.4m of 9 g/t Ag, **0.49% Cu** - Four rigs continue to drill at Ballywire, with a fifth rig drilling at the Company's"
26-468-26Ballywire · silverGrade: 3.4Grade Unit: g/tIntercept: 0.27 mView all detailsHide details
Identity
- Hole ID
- 26-468-26
- Project
- Ballywire
- Commodity
- silver
- Region
- ireland
- Reported Region
- ireland
- Ticker
- ZNG.V
Geometry
- Grade
- 3.4
- Grade Unit
- g/t
- Intercept
- 0.27 m
- True Width
- 0.243 m
- From
- 197.31 m
- To
- 197.58 m
- Intercept Depth
- 197.31 m
Classification
- Program
- mixed
- Sample Type
- drill
- Group ID
- 26-468-26:197.31-197.58
QA/QC
- Laboratory
- ALS Laboratories
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-10-14T00:00:00.000Z
Reasoning: While the silver grade is low, its presence is noted in this high-grade zinc intercept.
Positive factors
- True width estimated at 90% of downhole length
Negative factors
- Low silver grade
- Very narrow intercept
Evidence · table
“3.4”
Context: 0.27
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 0.243
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "- 1.4m of 9 g/t Ag, **0.49% Cu** - Four rigs continue to drill at Ballywire, with a fifth rig drilling at the Company's"
26-468-26Ballywire · copperGrade: 0.01Grade Unit: %Intercept: 0.27 mView all detailsHide details
Identity
- Hole ID
- 26-468-26
- Project
- Ballywire
- Commodity
- copper
- Region
- ireland
- Reported Region
- ireland
- Ticker
- ZNG.V
Geometry
- Grade
- 0.01
- Grade Unit
- %
- Intercept
- 0.27 m
- True Width
- 0.243 m
- From
- 197.31 m
- To
- 197.58 m
- Intercept Depth
- 197.31 m
Classification
- Program
- mixed
- Sample Type
- drill
- Group ID
- 26-468-26:197.31-197.58
QA/QC
- Laboratory
- ALS Laboratories
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-10-14T00:00:00.000Z
Reasoning: While the copper grade is very low, its presence is noted in this high-grade zinc intercept.
Positive factors
- True width estimated at 90% of downhole length
Negative factors
- Very low copper grade
- Very narrow intercept
Evidence · table
“0.01”
Context: 0.27
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 0.243
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "- 1.4m of 9 g/t Ag, **0.49% Cu** - Four rigs continue to drill at Ballywire, with a fifth rig drilling at the Company's"
26-468-26Ballywire · zincGrade: 2.11Grade Unit: %Intercept: 31.1 mView all detailsHide details
Identity
- Hole ID
- 26-468-26
- Project
- Ballywire
- Commodity
- zinc
- Region
- ireland
- Reported Region
- ireland
- Ticker
- ZNG.V
Geometry
- Grade
- 2.11
- Grade Unit
- %
- Intercept
- 31.1 m
- True Width
- 27.99 m
- From
- 360.6 m
- To
- 391.7 m
- Intercept Depth
- 360.6 m
Classification
- Program
- mixed
- Sample Type
- drill
- Group ID
- 26-468-26:360.6-391.7
QA/QC
- Laboratory
- ALS Laboratories
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-10-14T00:00:00.000Z
Reasoning: This broad intercept in a gap-filling hole confirms significant mineralization continuity, with a good zinc grade and confirmed true width.
Positive factors
- Significant intercept length in a gap-filling hole
- Good zinc grade for a broad intercept
- True width estimated at 90% of downhole length
Evidence · table
“2.11”
Context: 31.10
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 27.99
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "- 1.4m of 9 g/t Ag, **0.49% Cu** - Four rigs continue to drill at Ballywire, with a fifth rig drilling at the Company's"
26-468-26Ballywire · leadGrade: 1.62Grade Unit: %Intercept: 31.1 mView all detailsHide details
Identity
- Hole ID
- 26-468-26
- Project
- Ballywire
- Commodity
- lead
- Region
- ireland
- Reported Region
- ireland
- Ticker
- ZNG.V
Geometry
- Grade
- 1.62
- Grade Unit
- %
- Intercept
- 31.1 m
- True Width
- 27.99 m
- From
- 360.6 m
- To
- 391.7 m
- Intercept Depth
- 360.6 m
Classification
- Program
- mixed
- Sample Type
- drill
- Group ID
- 26-468-26:360.6-391.7
QA/QC
- Laboratory
- ALS Laboratories
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-10-14T00:00:00.000Z
Reasoning: The good lead grade significantly contributes to the polymetallic nature of this broad intercept, confirming strong mineralization continuity.
Positive factors
- Significant intercept length in a gap-filling hole
- Good lead grade contributing to overall Zn+Pb mineralization
- True width estimated at 90% of downhole length
Evidence · table
“1.62”
Context: 31.10
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 27.99
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "- 1.4m of 9 g/t Ag, **0.49% Cu** - Four rigs continue to drill at Ballywire, with a fifth rig drilling at the Company's"
26-468-26Ballywire · silverGrade: 15.2Grade Unit: g/tIntercept: 31.1 mView all detailsHide details
Identity
- Hole ID
- 26-468-26
- Project
- Ballywire
- Commodity
- silver
- Region
- ireland
- Reported Region
- ireland
- Ticker
- ZNG.V
Geometry
- Grade
- 15.2
- Grade Unit
- g/t
- Intercept
- 31.1 m
- True Width
- 27.99 m
- From
- 360.6 m
- To
- 391.7 m
- Intercept Depth
- 360.6 m
Classification
- Program
- mixed
- Sample Type
- drill
- Group ID
- 26-468-26:360.6-391.7
QA/QC
- Laboratory
- ALS Laboratories
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-10-14T00:00:00.000Z
Reasoning: The moderate silver grade enhances the polymetallic nature of this broad intercept, confirming strong mineralization continuity.
Positive factors
- Significant intercept length in a gap-filling hole
- Moderate silver grade adding to polymetallic value
- True width estimated at 90% of downhole length
Evidence · table
“15.2”
Context: 31.10
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 27.99
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "- 1.4m of 9 g/t Ag, **0.49% Cu** - Four rigs continue to drill at Ballywire, with a fifth rig drilling at the Company's"
26-468-26Ballywire · copperGrade: 0.04Grade Unit: %Intercept: 31.1 mView all detailsHide details
Identity
- Hole ID
- 26-468-26
- Project
- Ballywire
- Commodity
- copper
- Region
- ireland
- Reported Region
- ireland
- Ticker
- ZNG.V
Geometry
- Grade
- 0.04
- Grade Unit
- %
- Intercept
- 31.1 m
- True Width
- 27.99 m
- From
- 360.6 m
- To
- 391.7 m
- Intercept Depth
- 360.6 m
Classification
- Program
- mixed
- Sample Type
- drill
- Group ID
- 26-468-26:360.6-391.7
QA/QC
- Laboratory
- ALS Laboratories
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-10-14T00:00:00.000Z
Reasoning: The presence of copper, even at a low grade, contributes to the polymetallic nature of this broad intercept, confirming mineralization continuity.
Positive factors
- Significant intercept length in a gap-filling hole
- Presence of copper, indicating polymetallic mineralization
- True width estimated at 90% of downhole length
Negative factors
- Low copper grade
Evidence · table
“0.04”
Context: 31.10
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 27.99
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "- 1.4m of 9 g/t Ag, **0.49% Cu** - Four rigs continue to drill at Ballywire, with a fifth rig drilling at the Company's"
26-468-26Ballywire · zincGrade: 4.62Grade Unit: %Intercept: 11.1 mView all detailsHide details
Identity
- Hole ID
- 26-468-26
- Project
- Ballywire
- Commodity
- zinc
- Region
- ireland
- Reported Region
- ireland
- Ticker
- ZNG.V
Geometry
- Grade
- 4.62
- Grade Unit
- %
- Intercept
- 11.1 m
- True Width
- 9.99 m
- From
- 361.5 m
- To
- 372.6 m
- Intercept Depth
- 360.6 m
Classification
- Program
- mixed
- Sample Type
- drill
- Group ID
- 26-468-26:361.5-372.6
QA/QC
- Laboratory
- ALS Laboratories
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-10-14T00:00:00.000Z
Reasoning: This high-grade zinc intercept within a broader mineralized zone confirms strong continuity of high-grade mineralization in the gap area.
Positive factors
- High-grade zinc intercept within a significant gap-filling hole
- Good width for high-grade mineralization
- True width estimated at 90% of downhole length
Evidence · table
“4.62”
Context: 11.10
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 9.99
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "- 1.4m of 9 g/t Ag, **0.49% Cu** - Four rigs continue to drill at Ballywire, with a fifth rig drilling at the Company's"
26-468-26Ballywire · leadGrade: 3.14Grade Unit: %Intercept: 11.1 mView all detailsHide details
Identity
- Hole ID
- 26-468-26
- Project
- Ballywire
- Commodity
- lead
- Region
- ireland
- Reported Region
- ireland
- Ticker
- ZNG.V
Geometry
- Grade
- 3.14
- Grade Unit
- %
- Intercept
- 11.1 m
- True Width
- 9.99 m
- From
- 361.5 m
- To
- 372.6 m
- Intercept Depth
- 360.6 m
Classification
- Program
- mixed
- Sample Type
- drill
- Group ID
- 26-468-26:361.5-372.6
QA/QC
- Laboratory
- ALS Laboratories
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-10-14T00:00:00.000Z
Reasoning: The high lead grade significantly contributes to the high-grade polymetallic nature of this intercept, reinforcing the quality of mineralization in the gap area.
Positive factors
- High-grade lead contributing to high-grade Zn+Pb mineralization
- Good width for high-grade mineralization
- True width estimated at 90% of downhole length
Evidence · table
“3.14”
Context: 11.10
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 9.99
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "- 1.4m of 9 g/t Ag, **0.49% Cu** - Four rigs continue to drill at Ballywire, with a fifth rig drilling at the Company's"
26-468-26Ballywire · silverGrade: 32.3Grade Unit: g/tIntercept: 11.1 mView all detailsHide details
Identity
- Hole ID
- 26-468-26
- Project
- Ballywire
- Commodity
- silver
- Region
- ireland
- Reported Region
- ireland
- Ticker
- ZNG.V
Geometry
- Grade
- 32.3
- Grade Unit
- g/t
- Intercept
- 11.1 m
- True Width
- 9.99 m
- From
- 361.5 m
- To
- 372.6 m
- Intercept Depth
- 360.6 m
Classification
- Program
- mixed
- Sample Type
- drill
- Group ID
- 26-468-26:361.5-372.6
QA/QC
- Laboratory
- ALS Laboratories
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-10-14T00:00:00.000Z
Reasoning: The good silver grade enhances the polymetallic nature of this high-grade intercept, contributing to the overall value of the mineralization in the gap area.
Positive factors
- Good silver grade adding to polymetallic value
- Good width for mineralization
- True width estimated at 90% of downhole length
Evidence · table
“32.3”
Context: 11.10
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 9.99
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "- 1.4m of 9 g/t Ag, **0.49% Cu** - Four rigs continue to drill at Ballywire, with a fifth rig drilling at the Company's"
26-468-26Ballywire · copperGrade: 0.01Grade Unit: %Intercept: 11.1 mView all detailsHide details
Identity
- Hole ID
- 26-468-26
- Project
- Ballywire
- Commodity
- copper
- Region
- ireland
- Reported Region
- ireland
- Ticker
- ZNG.V
Geometry
- Grade
- 0.01
- Grade Unit
- %
- Intercept
- 11.1 m
- True Width
- 9.99 m
- From
- 361.5 m
- To
- 372.6 m
- Intercept Depth
- 360.6 m
Classification
- Program
- mixed
- Sample Type
- drill
- Group ID
- 26-468-26:361.5-372.6
QA/QC
- Laboratory
- ALS Laboratories
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-10-14T00:00:00.000Z
Reasoning: While the copper grade is very low, its presence in this high-grade polymetallic intercept is noted as part of the overall mineral assemblage.
Positive factors
- Presence of copper, indicating polymetallic mineralization
- True width estimated at 90% of downhole length
Negative factors
- Very low copper grade
Evidence · table
“0.01”
Context: 11.10
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 9.99
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "- 1.4m of 9 g/t Ag, **0.49% Cu** - Four rigs continue to drill at Ballywire, with a fifth rig drilling at the Company's"
26-468-26Ballywire · zincGrade: 5.64Grade Unit: %Intercept: 7.37 mView all detailsHide details
Identity
- Hole ID
- 26-468-26
- Project
- Ballywire
- Commodity
- zinc
- Region
- ireland
- Reported Region
- ireland
- Ticker
- ZNG.V
Geometry
- Grade
- 5.64
- Grade Unit
- %
- Intercept
- 7.37 m
- True Width
- 6.633 m
- From
- 365.23 m
- To
- 372.6 m
- Intercept Depth
- 360.6 m
Classification
- Program
- mixed
- Sample Type
- drill
- Group ID
- 26-468-26:365.23-372.6
QA/QC
- Laboratory
- ALS Laboratories
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-10-14T00:00:00.000Z
Reasoning: This very high-grade zinc intercept is a bonanza result, confirming excellent mineralization quality and continuity in the gap area.
Positive factors
- Very high-grade zinc intercept within a significant gap-filling hole
- Good width for bonanza-grade mineralization
- True width estimated at 90% of downhole length
Evidence · table
“5.64”
Context: 7.37
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 6.633
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "- 1.4m of 9 g/t Ag, **0.49% Cu** - Four rigs continue to drill at Ballywire, with a fifth rig drilling at the Company's"
26-468-26Ballywire · leadGrade: 4.45Grade Unit: %Intercept: 7.37 mView all detailsHide details
Identity
- Hole ID
- 26-468-26
- Project
- Ballywire
- Commodity
- lead
- Region
- ireland
- Reported Region
- ireland
- Ticker
- ZNG.V
Geometry
- Grade
- 4.45
- Grade Unit
- %
- Intercept
- 7.37 m
- True Width
- 6.633 m
- From
- 365.23 m
- To
- 372.6 m
- Intercept Depth
- 360.6 m
Classification
- Program
- mixed
- Sample Type
- drill
- Group ID
- 26-468-26:365.23-372.6
QA/QC
- Laboratory
- ALS Laboratories
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-10-14T00:00:00.000Z
Reasoning: The very high lead grade significantly enhances the bonanza-grade polymetallic nature of this intercept, reinforcing the excellent quality of mineralization.
Positive factors
- Very high-grade lead contributing to bonanza Zn+Pb mineralization
- Good width for high-grade mineralization
- True width estimated at 90% of downhole length
Evidence · table
“4.45”
Context: 7.37
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 6.633
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "- 1.4m of 9 g/t Ag, **0.49% Cu** - Four rigs continue to drill at Ballywire, with a fifth rig drilling at the Company's"
26-468-26Ballywire · silverGrade: 36.5Grade Unit: g/tIntercept: 7.37 mView all detailsHide details
Identity
- Hole ID
- 26-468-26
- Project
- Ballywire
- Commodity
- silver
- Region
- ireland
- Reported Region
- ireland
- Ticker
- ZNG.V
Geometry
- Grade
- 36.5
- Grade Unit
- g/t
- Intercept
- 7.37 m
- True Width
- 6.633 m
- From
- 365.23 m
- To
- 372.6 m
- Intercept Depth
- 360.6 m
Classification
- Program
- mixed
- Sample Type
- drill
- Group ID
- 26-468-26:365.23-372.6
QA/QC
- Laboratory
- ALS Laboratories
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-10-14T00:00:00.000Z
Reasoning: The good silver grade enhances the polymetallic nature of this bonanza-grade intercept, contributing to the overall value of the mineralization in the gap area.
Positive factors
- Good silver grade adding to polymetallic value
- Good width for mineralization
- True width estimated at 90% of downhole length
Evidence · table
“36.5”
Context: 7.37
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 6.633
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "- 1.4m of 9 g/t Ag, **0.49% Cu** - Four rigs continue to drill at Ballywire, with a fifth rig drilling at the Company's"
26-468-26Ballywire · copperGrade: 0.02Grade Unit: %Intercept: 7.37 mView all detailsHide details
Identity
- Hole ID
- 26-468-26
- Project
- Ballywire
- Commodity
- copper
- Region
- ireland
- Reported Region
- ireland
- Ticker
- ZNG.V
Geometry
- Grade
- 0.02
- Grade Unit
- %
- Intercept
- 7.37 m
- True Width
- 6.633 m
- From
- 365.23 m
- To
- 372.6 m
- Intercept Depth
- 360.6 m
Classification
- Program
- mixed
- Sample Type
- drill
- Group ID
- 26-468-26:365.23-372.6
QA/QC
- Laboratory
- ALS Laboratories
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-10-14T00:00:00.000Z
Reasoning: While the copper grade is very low, its presence in this bonanza-grade polymetallic intercept is noted as part of the overall mineral assemblage.
Positive factors
- Presence of copper, indicating polymetallic mineralization
- True width estimated at 90% of downhole length
Negative factors
- Very low copper grade
Evidence · table
“0.02”
Context: 7.37
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 6.633
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "- 1.4m of 9 g/t Ag, **0.49% Cu** - Four rigs continue to drill at Ballywire, with a fifth rig drilling at the Company's"
26-468-26Ballywire · zincGrade: 3.32Grade Unit: %Intercept: 2.68 mView all detailsHide details
Identity
- Hole ID
- 26-468-26
- Project
- Ballywire
- Commodity
- zinc
- Region
- ireland
- Reported Region
- ireland
- Ticker
- ZNG.V
Geometry
- Grade
- 3.32
- Grade Unit
- %
- Intercept
- 2.68 m
- True Width
- 2.412 m
- From
- 369.92 m
- To
- 372.6 m
- Intercept Depth
- 360.6 m
Classification
- Program
- mixed
- Sample Type
- drill
- Group ID
- 26-468-26:369.92-372.6
QA/QC
- Laboratory
- ALS Laboratories
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-10-14T00:00:00.000Z
Reasoning: This high-grade zinc intercept within a high-grade zone further confirms the bonanza-grade potential and continuity of mineralization in the gap area.
Positive factors
- High-grade zinc intercept within a significant gap-filling hole
- Good width for high-grade mineralization
- True width estimated at 90% of downhole length
Evidence · table
“3.32”
Context: 2.68
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 2.412
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "- 1.4m of 9 g/t Ag, **0.49% Cu** - Four rigs continue to drill at Ballywire, with a fifth rig drilling at the Company's"
26-468-26Ballywire · leadGrade: 8.71Grade Unit: %Intercept: 2.68 mView all detailsHide details
Identity
- Hole ID
- 26-468-26
- Project
- Ballywire
- Commodity
- lead
- Region
- ireland
- Reported Region
- ireland
- Ticker
- ZNG.V
Geometry
- Grade
- 8.71
- Grade Unit
- %
- Intercept
- 2.68 m
- True Width
- 2.412 m
- From
- 369.92 m
- To
- 372.6 m
- Intercept Depth
- 360.6 m
Classification
- Program
- mixed
- Sample Type
- drill
- Group ID
- 26-468-26:369.92-372.6
QA/QC
- Laboratory
- ALS Laboratories
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-10-14T00:00:00.000Z
Reasoning: The exceptional lead grade further enhances the bonanza-grade polymetallic nature of this intercept, indicating very high-quality mineralization.
Positive factors
- Exceptional lead grade contributing to bonanza Zn+Pb mineralization
- Good width for high-grade mineralization
- True width estimated at 90% of downhole length
Evidence · table
“8.71”
Context: 2.68
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 2.412
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "- 1.4m of 9 g/t Ag, **0.49% Cu** - Four rigs continue to drill at Ballywire, with a fifth rig drilling at the Company's"
26-468-26Ballywire · silverGrade: 43.7Grade Unit: g/tIntercept: 2.68 mView all detailsHide details
Identity
- Hole ID
- 26-468-26
- Project
- Ballywire
- Commodity
- silver
- Region
- ireland
- Reported Region
- ireland
- Ticker
- ZNG.V
Geometry
- Grade
- 43.7
- Grade Unit
- g/t
- Intercept
- 2.68 m
- True Width
- 2.412 m
- From
- 369.92 m
- To
- 372.6 m
- Intercept Depth
- 360.6 m
Classification
- Program
- mixed
- Sample Type
- drill
- Group ID
- 26-468-26:369.92-372.6
QA/QC
- Laboratory
- ALS Laboratories
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-10-14T00:00:00.000Z
Reasoning: The good silver grade enhances the polymetallic nature of this exceptional intercept, contributing to the overall value of the mineralization in the gap area.
Positive factors
- Good silver grade adding to polymetallic value
- Good width for mineralization
- True width estimated at 90% of downhole length
Evidence · table
“43.7”
Context: 2.68
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 2.412
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "- 1.4m of 9 g/t Ag, **0.49% Cu** - Four rigs continue to drill at Ballywire, with a fifth rig drilling at the Company's"
26-468-26Ballywire · copperGrade: 0.02Grade Unit: %Intercept: 2.68 mView all detailsHide details
Identity
- Hole ID
- 26-468-26
- Project
- Ballywire
- Commodity
- copper
- Region
- ireland
- Reported Region
- ireland
- Ticker
- ZNG.V
Geometry
- Grade
- 0.02
- Grade Unit
- %
- Intercept
- 2.68 m
- True Width
- 2.412 m
- From
- 369.92 m
- To
- 372.6 m
- Intercept Depth
- 360.6 m
Classification
- Program
- mixed
- Sample Type
- drill
- Group ID
- 26-468-26:369.92-372.6
QA/QC
- Laboratory
- ALS Laboratories
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-10-14T00:00:00.000Z
Reasoning: While the copper grade is very low, its presence in this exceptional polymetallic intercept is noted as part of the overall mineral assemblage.
Positive factors
- Presence of copper, indicating polymetallic mineralization
- True width estimated at 90% of downhole length
Negative factors
- Very low copper grade
Evidence · table
“0.02”
Context: 2.68
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 2.412
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "- 1.4m of 9 g/t Ag, **0.49% Cu** - Four rigs continue to drill at Ballywire, with a fifth rig drilling at the Company's"
26-468-26Ballywire · antimonyGrade: 0.01Grade Unit: %Intercept: 2.68 mView all detailsHide details
Identity
- Hole ID
- 26-468-26
- Project
- Ballywire
- Commodity
- antimony
- Region
- ireland
- Reported Region
- ireland
- Ticker
- ZNG.V
Geometry
- Grade
- 0.01
- Grade Unit
- %
- Intercept
- 2.68 m
- True Width
- 2.412 m
- From
- 369.92 m
- To
- 372.6 m
- Intercept Depth
- 360.6 m
Classification
- Program
- mixed
- Sample Type
- drill
- Group ID
- 26-468-26:369.92-372.6
QA/QC
- Laboratory
- ALS Laboratories
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-10-14T00:00:00.000Z
Reasoning: The presence of antimony, even at a low grade, contributes to the polymetallic nature of this exceptional intercept.
Positive factors
- Presence of antimony, indicating polymetallic mineralization
- True width estimated at 90% of downhole length
Negative factors
- Low antimony grade
Evidence · table
“0.01”
Context: 2.68
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 2.412
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "- 1.4m of 9 g/t Ag, **0.49% Cu** - Four rigs continue to drill at Ballywire, with a fifth rig drilling at the Company's"
26-468-26Ballywire · zincGrade: 5.45Grade Unit: %Intercept: 0.82 mView all detailsHide details
Identity
- Hole ID
- 26-468-26
- Project
- Ballywire
- Commodity
- zinc
- Region
- ireland
- Reported Region
- ireland
- Ticker
- ZNG.V
Geometry
- Grade
- 5.45
- Grade Unit
- %
- Intercept
- 0.82 m
- True Width
- 0.738 m
- From
- 371.78 m
- To
- 372.6 m
- Intercept Depth
- 360.6 m
Classification
- Program
- mixed
- Sample Type
- drill
- Group ID
- 26-468-26:371.78-372.6
QA/QC
- Laboratory
- ALS Laboratories
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-10-14T00:00:00.000Z
Reasoning: This very high-grade zinc intercept, though narrow, confirms excellent mineralization quality and continuity in the gap area.
Positive factors
- Very high-grade zinc intercept within a significant gap-filling hole
- True width estimated at 90% of downhole length
Negative factors
- Narrow intercept
Evidence · table
“5.45”
Context: 0.82
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 0.738
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "- 1.4m of 9 g/t Ag, **0.49% Cu** - Four rigs continue to drill at Ballywire, with a fifth rig drilling at the Company's"
26-468-26Ballywire · leadGrade: 11.25Grade Unit: %Intercept: 0.82 mView all detailsHide details
Identity
- Hole ID
- 26-468-26
- Project
- Ballywire
- Commodity
- lead
- Region
- ireland
- Reported Region
- ireland
- Ticker
- ZNG.V
Geometry
- Grade
- 11.25
- Grade Unit
- %
- Intercept
- 0.82 m
- True Width
- 0.738 m
- From
- 371.78 m
- To
- 372.6 m
- Intercept Depth
- 360.6 m
Classification
- Program
- mixed
- Sample Type
- drill
- Group ID
- 26-468-26:371.78-372.6
QA/QC
- Laboratory
- ALS Laboratories
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-10-14T00:00:00.000Z
Reasoning: The bonanza lead grade further enhances the exceptional polymetallic nature of this intercept, indicating extremely high-quality mineralization.
Positive factors
- Bonanza lead grade contributing to exceptional Zn+Pb mineralization
- True width estimated at 90% of downhole length
Negative factors
- Narrow intercept
Evidence · table
“11.25”
Context: 0.82
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 0.738
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "- 1.4m of 9 g/t Ag, **0.49% Cu** - Four rigs continue to drill at Ballywire, with a fifth rig drilling at the Company's"
26-468-26Ballywire · silverGrade: 48.8Grade Unit: g/tIntercept: 0.82 mView all detailsHide details
Identity
- Hole ID
- 26-468-26
- Project
- Ballywire
- Commodity
- silver
- Region
- ireland
- Reported Region
- ireland
- Ticker
- ZNG.V
Geometry
- Grade
- 48.8
- Grade Unit
- g/t
- Intercept
- 0.82 m
- True Width
- 0.738 m
- From
- 371.78 m
- To
- 372.6 m
- Intercept Depth
- 360.6 m
Classification
- Program
- mixed
- Sample Type
- drill
- Group ID
- 26-468-26:371.78-372.6
QA/QC
- Laboratory
- ALS Laboratories
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-10-14T00:00:00.000Z
Reasoning: The high silver grade enhances the polymetallic nature of this bonanza-grade intercept, contributing significantly to the overall value of the mineralization.
Positive factors
- High-grade silver adding to polymetallic value
- True width estimated at 90% of downhole length
Negative factors
- Narrow intercept
Evidence · table
“48.8”
Context: 0.82
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 0.738
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "- 1.4m of 9 g/t Ag, **0.49% Cu** - Four rigs continue to drill at Ballywire, with a fifth rig drilling at the Company's"
26-468-26Ballywire · copperGrade: 0.04Grade Unit: %Intercept: 0.82 mView all detailsHide details
Identity
- Hole ID
- 26-468-26
- Project
- Ballywire
- Commodity
- copper
- Region
- ireland
- Reported Region
- ireland
- Ticker
- ZNG.V
Geometry
- Grade
- 0.04
- Grade Unit
- %
- Intercept
- 0.82 m
- True Width
- 0.738 m
- From
- 371.78 m
- To
- 372.6 m
- Intercept Depth
- 360.6 m
Classification
- Program
- mixed
- Sample Type
- drill
- Group ID
- 26-468-26:371.78-372.6
QA/QC
- Laboratory
- ALS Laboratories
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-10-14T00:00:00.000Z
Reasoning: The presence of copper, even at a low grade, contributes to the polymetallic nature of this bonanza-grade intercept.
Positive factors
- Presence of copper, indicating polymetallic mineralization
- True width estimated at 90% of downhole length
Negative factors
- Low copper grade
- Narrow intercept
Evidence · table
“0.04”
Context: 0.82
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 0.738
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "- 1.4m of 9 g/t Ag, **0.49% Cu** - Four rigs continue to drill at Ballywire, with a fifth rig drilling at the Company's"
26-468-26Ballywire · antimonyGrade: 0.01Grade Unit: %Intercept: 0.82 mView all detailsHide details
Identity
- Hole ID
- 26-468-26
- Project
- Ballywire
- Commodity
- antimony
- Region
- ireland
- Reported Region
- ireland
- Ticker
- ZNG.V
Geometry
- Grade
- 0.01
- Grade Unit
- %
- Intercept
- 0.82 m
- True Width
- 0.738 m
- From
- 371.78 m
- To
- 372.6 m
- Intercept Depth
- 360.6 m
Classification
- Program
- mixed
- Sample Type
- drill
- Group ID
- 26-468-26:371.78-372.6
QA/QC
- Laboratory
- ALS Laboratories
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-10-14T00:00:00.000Z
Reasoning: The presence of antimony, even at a low grade, contributes to the polymetallic nature of this bonanza-grade intercept.
Positive factors
- Presence of antimony, indicating polymetallic mineralization
- True width estimated at 90% of downhole length
Negative factors
- Low antimony grade
- Narrow intercept
Evidence · table
“0.01”
Context: 0.82
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 0.738
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "- 1.4m of 9 g/t Ag, **0.49% Cu** - Four rigs continue to drill at Ballywire, with a fifth rig drilling at the Company's"
26-468-26Ballywire · zincGrade: 0.02Grade Unit: %Intercept: 1.85 mView all detailsHide details
Identity
- Hole ID
- 26-468-26
- Project
- Ballywire
- Commodity
- zinc
- Region
- ireland
- Reported Region
- ireland
- Ticker
- ZNG.V
Geometry
- Grade
- 0.02
- Grade Unit
- %
- Intercept
- 1.85 m
- True Width
- 1.48 m
- From
- 401.46 m
- To
- 403.31 m
- Intercept Depth
- 401.46 m
Classification
- Program
- mixed
- Sample Type
- drill
- Group ID
- 26-468-26:401.46-403.31
QA/QC
- Laboratory
- ALS Laboratories
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-10-14T00:00:00.000Z
Reasoning: While the zinc grade is very low, this narrow intercept indicates another zone of copper-silver mineralization at depth.
Positive factors
- True width estimated at 80% of downhole length
Negative factors
- Very low zinc grade
- Narrow intercept
Evidence · table
“0.02”
Context: 1.85
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 1.48
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "- 1.4m of 9 g/t Ag, **0.49% Cu** - Four rigs continue to drill at Ballywire, with a fifth rig drilling at the Company's"
26-468-26Ballywire · leadGrade: 0.02Grade Unit: %Intercept: 1.85 mView all detailsHide details
Identity
- Hole ID
- 26-468-26
- Project
- Ballywire
- Commodity
- lead
- Region
- ireland
- Reported Region
- ireland
- Ticker
- ZNG.V
Geometry
- Grade
- 0.02
- Grade Unit
- %
- Intercept
- 1.85 m
- True Width
- 1.48 m
- From
- 401.46 m
- To
- 403.31 m
- Intercept Depth
- 401.46 m
Classification
- Program
- mixed
- Sample Type
- drill
- Group ID
- 26-468-26:401.46-403.31
QA/QC
- Laboratory
- ALS Laboratories
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-10-14T00:00:00.000Z
Reasoning: While the lead grade is very low, this narrow intercept indicates another zone of copper-silver mineralization at depth.
Positive factors
- True width estimated at 80% of downhole length
Negative factors
- Very low lead grade
- Narrow intercept
Evidence · table
“0.02”
Context: 1.85
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 1.48
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "- 1.4m of 9 g/t Ag, **0.49% Cu** - Four rigs continue to drill at Ballywire, with a fifth rig drilling at the Company's"
26-468-26Ballywire · silverGrade: 56.6Grade Unit: g/tIntercept: 1.85 mView all detailsHide details
Identity
- Hole ID
- 26-468-26
- Project
- Ballywire
- Commodity
- silver
- Region
- ireland
- Reported Region
- ireland
- Ticker
- ZNG.V
Geometry
- Grade
- 56.6
- Grade Unit
- g/t
- Intercept
- 1.85 m
- True Width
- 1.48 m
- From
- 401.46 m
- To
- 403.31 m
- Intercept Depth
- 401.46 m
Classification
- Program
- mixed
- Sample Type
- drill
- Group ID
- 26-468-26:401.46-403.31
QA/QC
- Laboratory
- ALS Laboratories
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-10-14T00:00:00.000Z
Reasoning: This high-grade silver intercept significantly enhances the polymetallic nature of the deeper mineralization, indicating a valuable zone.
Positive factors
- High-grade silver over a good width for deeper mineralization
- True width estimated at 80% of downhole length
Evidence · table
“56.6”
Context: 1.85
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 1.48
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "- 1.4m of 9 g/t Ag, **0.49% Cu** - Four rigs continue to drill at Ballywire, with a fifth rig drilling at the Company's"
26-468-26Ballywire · copperGrade: 0.12Grade Unit: %Intercept: 1.85 mView all detailsHide details
Identity
- Hole ID
- 26-468-26
- Project
- Ballywire
- Commodity
- copper
- Region
- ireland
- Reported Region
- ireland
- Ticker
- ZNG.V
Geometry
- Grade
- 0.12
- Grade Unit
- %
- Intercept
- 1.85 m
- True Width
- 1.48 m
- From
- 401.46 m
- To
- 403.31 m
- Intercept Depth
- 401.46 m
Classification
- Program
- mixed
- Sample Type
- drill
- Group ID
- 26-468-26:401.46-403.31
QA/QC
- Laboratory
- ALS Laboratories
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-10-14T00:00:00.000Z
Reasoning: This moderate copper grade over a good width contributes to the polymetallic nature of the deeper mineralization.
Positive factors
- Moderate copper grade over a good width for deeper mineralization
- True width estimated at 80% of downhole length
Evidence · table
“0.12”
Context: 1.85
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 1.48
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "- 1.4m of 9 g/t Ag, **0.49% Cu** - Four rigs continue to drill at Ballywire, with a fifth rig drilling at the Company's"
26-468-26Ballywire · zincGrade: 0.03Grade Unit: %Intercept: 0.91 mView all detailsHide details
Identity
- Hole ID
- 26-468-26
- Project
- Ballywire
- Commodity
- zinc
- Region
- ireland
- Reported Region
- ireland
- Ticker
- ZNG.V
Geometry
- Grade
- 0.03
- Grade Unit
- %
- Intercept
- 0.91 m
- True Width
- 0.728 m
- From
- 402.4 m
- To
- 403.31 m
- Intercept Depth
- 401.46 m
Classification
- Program
- mixed
- Sample Type
- drill
- Group ID
- 26-468-26:402.4-403.31
QA/QC
- Laboratory
- ALS Laboratories
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-10-14T00:00:00.000Z
Reasoning: While the zinc grade is very low, this narrow intercept shows a higher-grade copper-silver zone within the deeper mineralization.
Positive factors
- True width estimated at 80% of downhole length
Negative factors
- Very low zinc grade
- Narrow intercept
Evidence · table
“0.03”
Context: 0.91
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 0.728
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "- 1.4m of 9 g/t Ag, **0.49% Cu** - Four rigs continue to drill at Ballywire, with a fifth rig drilling at the Company's"
26-468-26Ballywire · leadGrade: 0.03Grade Unit: %Intercept: 0.91 mView all detailsHide details
Identity
- Hole ID
- 26-468-26
- Project
- Ballywire
- Commodity
- lead
- Region
- ireland
- Reported Region
- ireland
- Ticker
- ZNG.V
Geometry
- Grade
- 0.03
- Grade Unit
- %
- Intercept
- 0.91 m
- True Width
- 0.728 m
- From
- 402.4 m
- To
- 403.31 m
- Intercept Depth
- 401.46 m
Classification
- Program
- mixed
- Sample Type
- drill
- Group ID
- 26-468-26:402.4-403.31
QA/QC
- Laboratory
- ALS Laboratories
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-10-14T00:00:00.000Z
Reasoning: While the lead grade is very low, this narrow intercept shows a higher-grade copper-silver zone within the deeper mineralization.
Positive factors
- True width estimated at 80% of downhole length
Negative factors
- Very low lead grade
- Narrow intercept
Evidence · table
“0.03”
Context: 0.91
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 0.728
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "- 1.4m of 9 g/t Ag, **0.49% Cu** - Four rigs continue to drill at Ballywire, with a fifth rig drilling at the Company's"
26-468-26Ballywire · silverGrade: 92.4Grade Unit: g/tIntercept: 0.91 mView all detailsHide details
Identity
- Hole ID
- 26-468-26
- Project
- Ballywire
- Commodity
- silver
- Region
- ireland
- Reported Region
- ireland
- Ticker
- ZNG.V
Geometry
- Grade
- 92.4
- Grade Unit
- g/t
- Intercept
- 0.91 m
- True Width
- 0.728 m
- From
- 402.4 m
- To
- 403.31 m
- Intercept Depth
- 401.46 m
Classification
- Program
- mixed
- Sample Type
- drill
- Group ID
- 26-468-26:402.4-403.31
QA/QC
- Laboratory
- ALS Laboratories
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-10-14T00:00:00.000Z
Reasoning: This very high-grade silver intercept significantly enhances the polymetallic nature of the deeper mineralization, indicating a valuable, concentrated zone.
Positive factors
- Very high-grade silver over a narrow but significant interval for deeper mineralization
- True width estimated at 80% of downhole length
Evidence · table
“92.4”
Context: 0.91
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 0.728
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "- 1.4m of 9 g/t Ag, **0.49% Cu** - Four rigs continue to drill at Ballywire, with a fifth rig drilling at the Company's"
26-468-26Ballywire · copperGrade: 0.22Grade Unit: %Intercept: 0.91 mView all detailsHide details
Identity
- Hole ID
- 26-468-26
- Project
- Ballywire
- Commodity
- copper
- Region
- ireland
- Reported Region
- ireland
- Ticker
- ZNG.V
Geometry
- Grade
- 0.22
- Grade Unit
- %
- Intercept
- 0.91 m
- True Width
- 0.728 m
- From
- 402.4 m
- To
- 403.31 m
- Intercept Depth
- 401.46 m
Classification
- Program
- mixed
- Sample Type
- drill
- Group ID
- 26-468-26:402.4-403.31
QA/QC
- Laboratory
- ALS Laboratories
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-10-14T00:00:00.000Z
Reasoning: This good copper grade over a narrow but significant width further enhances the polymetallic nature of the deeper mineralization, indicating a valuable, concentrated zone.
Positive factors
- Good copper grade over a narrow but significant interval for deeper mineralization
- True width estimated at 80% of downhole length
Evidence · table
“0.22”
Context: 0.91
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 0.728
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "- 1.4m of 9 g/t Ag, **0.49% Cu** - Four rigs continue to drill at Ballywire, with a fifth rig drilling at the Company's"
26-468-26Ballywire · antimonyGrade: 0.01Grade Unit: %Intercept: 0.91 mView all detailsHide details
Identity
- Hole ID
- 26-468-26
- Project
- Ballywire
- Commodity
- antimony
- Region
- ireland
- Reported Region
- ireland
- Ticker
- ZNG.V
Geometry
- Grade
- 0.01
- Grade Unit
- %
- Intercept
- 0.91 m
- True Width
- 0.728 m
- From
- 402.4 m
- To
- 403.31 m
- Intercept Depth
- 401.46 m
Classification
- Program
- mixed
- Sample Type
- drill
- Group ID
- 26-468-26:402.4-403.31
QA/QC
- Laboratory
- ALS Laboratories
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-10-14T00:00:00.000Z
Reasoning: The presence of antimony, even at a low grade, contributes to the polymetallic nature of this higher-grade deeper mineralization.
Positive factors
- Presence of antimony, indicating polymetallic mineralization
- True width estimated at 80% of downhole length
Negative factors
- Low antimony grade
- Narrow intercept
Evidence · table
“0.01”
Context: 0.91
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 0.728
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "- 1.4m of 9 g/t Ag, **0.49% Cu** - Four rigs continue to drill at Ballywire, with a fifth rig drilling at the Company's"
26-3552-58Ballywire · zincGrade: 0.14Grade Unit: %Intercept: 42.96 mView all detailsHide details
Identity
- Hole ID
- 26-3552-58
- Project
- Ballywire
- Commodity
- zinc
- Region
- ireland
- Reported Region
- ireland
- Ticker
- ZNG.V
Geometry
- Grade
- 0.14
- Grade Unit
- %
- Intercept
- 42.96 m
- True Width
- 34.368 m
- From
- 292.54 m
- To
- 335.5 m
- Intercept Depth
- 292.54 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- 26-3552-58:292.54-335.5
QA/QC
- Laboratory
- ALS Laboratories
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-10-14T00:00:00.000Z
Reasoning: This very broad intercept indicates widespread but low-grade zinc mineralization at the NE edge of the discovery area.
Positive factors
- Very broad intercept length
- True width estimated at 80% of downhole length
Negative factors
- Low zinc grade
Evidence · table
“0.14”
Context: 42.96
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 34.368
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "- 1.4m of 9 g/t Ag, **0.49% Cu** - Four rigs continue to drill at Ballywire, with a fifth rig drilling at the Company's"
26-3552-58Ballywire · leadGrade: 0.07Grade Unit: %Intercept: 42.96 mView all detailsHide details
Identity
- Hole ID
- 26-3552-58
- Project
- Ballywire
- Commodity
- lead
- Region
- ireland
- Reported Region
- ireland
- Ticker
- ZNG.V
Geometry
- Grade
- 0.07
- Grade Unit
- %
- Intercept
- 42.96 m
- True Width
- 34.368 m
- From
- 292.54 m
- To
- 335.5 m
- Intercept Depth
- 292.54 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- 26-3552-58:292.54-335.5
QA/QC
- Laboratory
- ALS Laboratories
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-10-14T00:00:00.000Z
Reasoning: This very broad intercept indicates widespread but low-grade lead mineralization at the NE edge of the discovery area.
Positive factors
- Very broad intercept length
- True width estimated at 80% of downhole length
Negative factors
- Low lead grade
Evidence · table
“0.07”
Context: 42.96
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 34.368
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "- 1.4m of 9 g/t Ag, **0.49% Cu** - Four rigs continue to drill at Ballywire, with a fifth rig drilling at the Company's"
26-3552-58Ballywire · silverGrade: 1.5Grade Unit: g/tIntercept: 42.96 mView all detailsHide details
Identity
- Hole ID
- 26-3552-58
- Project
- Ballywire
- Commodity
- silver
- Region
- ireland
- Reported Region
- ireland
- Ticker
- ZNG.V
Geometry
- Grade
- 1.5
- Grade Unit
- g/t
- Intercept
- 42.96 m
- True Width
- 34.368 m
- From
- 292.54 m
- To
- 335.5 m
- Intercept Depth
- 292.54 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- 26-3552-58:292.54-335.5
QA/QC
- Laboratory
- ALS Laboratories
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-10-14T00:00:00.000Z
Reasoning: This very broad intercept indicates widespread but low-grade silver mineralization at the NE edge of the discovery area.
Positive factors
- Very broad intercept length
- True width estimated at 80% of downhole length
Negative factors
- Low silver grade
Evidence · table
“1.5”
Context: 42.96
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 34.368
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "- 1.4m of 9 g/t Ag, **0.49% Cu** - Four rigs continue to drill at Ballywire, with a fifth rig drilling at the Company's"
26-3552-58Ballywire · copperGrade: 0.01Grade Unit: %Intercept: 42.96 mView all detailsHide details
Identity
- Hole ID
- 26-3552-58
- Project
- Ballywire
- Commodity
- copper
- Region
- ireland
- Reported Region
- ireland
- Ticker
- ZNG.V
Geometry
- Grade
- 0.01
- Grade Unit
- %
- Intercept
- 42.96 m
- True Width
- 34.368 m
- From
- 292.54 m
- To
- 335.5 m
- Intercept Depth
- 292.54 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- 26-3552-58:292.54-335.5
QA/QC
- Laboratory
- ALS Laboratories
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-10-14T00:00:00.000Z
Reasoning: This very broad intercept indicates widespread but very low-grade copper mineralization at the NE edge of the discovery area.
Positive factors
- Very broad intercept length
- True width estimated at 80% of downhole length
Negative factors
- Very low copper grade
Evidence · table
“0.01”
Context: 42.96
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 34.368
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "- 1.4m of 9 g/t Ag, **0.49% Cu** - Four rigs continue to drill at Ballywire, with a fifth rig drilling at the Company's"
26-3552-58Ballywire · zincGrade: 0.2Grade Unit: %Intercept: 24.58 mView all detailsHide details
Identity
- Hole ID
- 26-3552-58
- Project
- Ballywire
- Commodity
- zinc
- Region
- ireland
- Reported Region
- ireland
- Ticker
- ZNG.V
Geometry
- Grade
- 0.2
- Grade Unit
- %
- Intercept
- 24.58 m
- True Width
- 19.664 m
- From
- 293.49 m
- To
- 318.07 m
- Intercept Depth
- 292.54 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- 26-3552-58:293.49-318.07
QA/QC
- Laboratory
- ALS Laboratories
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-10-14T00:00:00.000Z
Reasoning: This broad intercept indicates continuous but low-grade zinc mineralization within the broader zone at the NE edge.
Positive factors
- Broad intercept length
- True width estimated at 80% of downhole length
Negative factors
- Low zinc grade
Evidence · table
“0.20”
Context: 24.58
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 19.664
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "- 1.4m of 9 g/t Ag, **0.49% Cu** - Four rigs continue to drill at Ballywire, with a fifth rig drilling at the Company's"
26-3552-58Ballywire · leadGrade: 0.11Grade Unit: %Intercept: 24.58 mView all detailsHide details
Identity
- Hole ID
- 26-3552-58
- Project
- Ballywire
- Commodity
- lead
- Region
- ireland
- Reported Region
- ireland
- Ticker
- ZNG.V
Geometry
- Grade
- 0.11
- Grade Unit
- %
- Intercept
- 24.58 m
- True Width
- 19.664 m
- From
- 293.49 m
- To
- 318.07 m
- Intercept Depth
- 292.54 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- 26-3552-58:293.49-318.07
QA/QC
- Laboratory
- ALS Laboratories
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-10-14T00:00:00.000Z
Reasoning: This broad intercept indicates continuous but low-grade lead mineralization within the broader zone at the NE edge.
Positive factors
- Broad intercept length
- True width estimated at 80% of downhole length
Negative factors
- Low lead grade
Evidence · table
“0.11”
Context: 24.58
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 19.664
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "- 1.4m of 9 g/t Ag, **0.49% Cu** - Four rigs continue to drill at Ballywire, with a fifth rig drilling at the Company's"
26-3552-58Ballywire · silverGrade: 0.9Grade Unit: g/tIntercept: 24.58 mView all detailsHide details
Identity
- Hole ID
- 26-3552-58
- Project
- Ballywire
- Commodity
- silver
- Region
- ireland
- Reported Region
- ireland
- Ticker
- ZNG.V
Geometry
- Grade
- 0.9
- Grade Unit
- g/t
- Intercept
- 24.58 m
- True Width
- 19.664 m
- From
- 293.49 m
- To
- 318.07 m
- Intercept Depth
- 292.54 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- 26-3552-58:293.49-318.07
QA/QC
- Laboratory
- ALS Laboratories
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-10-14T00:00:00.000Z
Reasoning: This broad intercept indicates continuous but low-grade silver mineralization within the broader zone at the NE edge.
Positive factors
- Broad intercept length
- True width estimated at 80% of downhole length
Negative factors
- Low silver grade
Evidence · table
“0.9”
Context: 24.58
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 19.664
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "- 1.4m of 9 g/t Ag, **0.49% Cu** - Four rigs continue to drill at Ballywire, with a fifth rig drilling at the Company's"
26-3552-58Ballywire · zincGrade: 0.37Grade Unit: %Intercept: 3.71 mView all detailsHide details
Identity
- Hole ID
- 26-3552-58
- Project
- Ballywire
- Commodity
- zinc
- Region
- ireland
- Reported Region
- ireland
- Ticker
- ZNG.V
Geometry
- Grade
- 0.37
- Grade Unit
- %
- Intercept
- 3.71 m
- True Width
- 2.968 m
- From
- 295.54 m
- To
- 299.25 m
- Intercept Depth
- 292.54 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- 26-3552-58:295.54-299.25
QA/QC
- Laboratory
- ALS Laboratories
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-10-14T00:00:00.000Z
Reasoning: This moderate zinc grade over a good width indicates a slightly higher-grade zone within the broader low-grade mineralization.
Positive factors
- Moderate zinc grade over a good width
- True width estimated at 80% of downhole length
Evidence · table
“0.37”
Context: 3.71
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 2.968
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "- 1.4m of 9 g/t Ag, **0.49% Cu** - Four rigs continue to drill at Ballywire, with a fifth rig drilling at the Company's"
26-3552-58Ballywire · leadGrade: 0.16Grade Unit: %Intercept: 3.71 mView all detailsHide details
Identity
- Hole ID
- 26-3552-58
- Project
- Ballywire
- Commodity
- lead
- Region
- ireland
- Reported Region
- ireland
- Ticker
- ZNG.V
Geometry
- Grade
- 0.16
- Grade Unit
- %
- Intercept
- 3.71 m
- True Width
- 2.968 m
- From
- 295.54 m
- To
- 299.25 m
- Intercept Depth
- 292.54 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- 26-3552-58:295.54-299.25
QA/QC
- Laboratory
- ALS Laboratories
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-10-14T00:00:00.000Z
Reasoning: This moderate lead grade over a good width indicates a slightly higher-grade zone within the broader low-grade mineralization.
Positive factors
- Moderate lead grade over a good width
- True width estimated at 80% of downhole length
Evidence · table
“0.16”
Context: 3.71
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 2.968
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "- 1.4m of 9 g/t Ag, **0.49% Cu** - Four rigs continue to drill at Ballywire, with a fifth rig drilling at the Company's"
26-3552-58Ballywire · silverGrade: 2Grade Unit: g/tIntercept: 3.71 mView all detailsHide details
Identity
- Hole ID
- 26-3552-58
- Project
- Ballywire
- Commodity
- silver
- Region
- ireland
- Reported Region
- ireland
- Ticker
- ZNG.V
Geometry
- Grade
- 2
- Grade Unit
- g/t
- Intercept
- 3.71 m
- True Width
- 2.968 m
- From
- 295.54 m
- To
- 299.25 m
- Intercept Depth
- 292.54 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- 26-3552-58:295.54-299.25
QA/QC
- Laboratory
- ALS Laboratories
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-10-14T00:00:00.000Z
Reasoning: This moderate silver grade over a good width indicates a slightly higher-grade zone within the broader low-grade mineralization.
Positive factors
- Moderate silver grade over a good width
- True width estimated at 80% of downhole length
Evidence · table
“2.0”
Context: 3.71
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 2.968
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "- 1.4m of 9 g/t Ag, **0.49% Cu** - Four rigs continue to drill at Ballywire, with a fifth rig drilling at the Company's"
26-3552-58Ballywire · zincGrade: 0.02Grade Unit: %Intercept: 4.13 mView all detailsHide details
Identity
- Hole ID
- 26-3552-58
- Project
- Ballywire
- Commodity
- zinc
- Region
- ireland
- Reported Region
- ireland
- Ticker
- ZNG.V
Geometry
- Grade
- 0.02
- Grade Unit
- %
- Intercept
- 4.13 m
- True Width
- 3.304 m
- From
- 550.53 m
- To
- 554.66 m
- Intercept Depth
- 550.53 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- 26-3552-58:550.53-554.66
QA/QC
- Laboratory
- ALS Laboratories
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-10-14T00:00:00.000Z
Reasoning: While the zinc grade is very low, this intercept indicates a zone of copper-silver mineralization at depth.
Positive factors
- Good intercept length for deeper mineralization
- True width estimated at 80% of downhole length
Negative factors
- Very low zinc grade
Evidence · table
“0.02”
Context: 4.13
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 3.304
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "- 1.4m of 9 g/t Ag, **0.49% Cu** - Four rigs continue to drill at Ballywire, with a fifth rig drilling at the Company's"
26-3552-58Ballywire · leadGrade: 0.01Grade Unit: %Intercept: 4.13 mView all detailsHide details
Identity
- Hole ID
- 26-3552-58
- Project
- Ballywire
- Commodity
- lead
- Region
- ireland
- Reported Region
- ireland
- Ticker
- ZNG.V
Geometry
- Grade
- 0.01
- Grade Unit
- %
- Intercept
- 4.13 m
- True Width
- 3.304 m
- From
- 550.53 m
- To
- 554.66 m
- Intercept Depth
- 550.53 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- 26-3552-58:550.53-554.66
QA/QC
- Laboratory
- ALS Laboratories
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-10-14T00:00:00.000Z
Reasoning: While the lead grade is very low, this intercept indicates a zone of copper-silver mineralization at depth.
Positive factors
- Good intercept length for deeper mineralization
- True width estimated at 80% of downhole length
Negative factors
- Very low lead grade
Evidence · table
“0.01”
Context: 4.13
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 3.304
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "- 1.4m of 9 g/t Ag, **0.49% Cu** - Four rigs continue to drill at Ballywire, with a fifth rig drilling at the Company's"
26-3552-58Ballywire · silverGrade: 7.1Grade Unit: g/tIntercept: 4.13 mView all detailsHide details
Identity
- Hole ID
- 26-3552-58
- Project
- Ballywire
- Commodity
- silver
- Region
- ireland
- Reported Region
- ireland
- Ticker
- ZNG.V
Geometry
- Grade
- 7.1
- Grade Unit
- g/t
- Intercept
- 4.13 m
- True Width
- 3.304 m
- From
- 550.53 m
- To
- 554.66 m
- Intercept Depth
- 550.53 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- 26-3552-58:550.53-554.66
QA/QC
- Laboratory
- ALS Laboratories
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-10-14T00:00:00.000Z
Reasoning: This moderate silver grade over a good width contributes to the polymetallic nature of the deeper mineralization.
Positive factors
- Moderate silver grade over a good width for deeper mineralization
- True width estimated at 80% of downhole length
Evidence · table
“7.1”
Context: 4.13
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 3.304
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "- 1.4m of 9 g/t Ag, **0.49% Cu** - Four rigs continue to drill at Ballywire, with a fifth rig drilling at the Company's"
26-3552-58Ballywire · copperGrade: 0.37Grade Unit: %Intercept: 4.13 mView all detailsHide details
Identity
- Hole ID
- 26-3552-58
- Project
- Ballywire
- Commodity
- copper
- Region
- ireland
- Reported Region
- ireland
- Ticker
- ZNG.V
Geometry
- Grade
- 0.37
- Grade Unit
- %
- Intercept
- 4.13 m
- True Width
- 3.304 m
- From
- 550.53 m
- To
- 554.66 m
- Intercept Depth
- 550.53 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- 26-3552-58:550.53-554.66
QA/QC
- Laboratory
- ALS Laboratories
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-10-14T00:00:00.000Z
Reasoning: This high-grade copper intercept significantly enhances the polymetallic nature of the deeper mineralization, indicating a valuable zone.
Positive factors
- High-grade copper over a good width for deeper mineralization
- True width estimated at 80% of downhole length
Evidence · table
“0.37”
Context: 4.13
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 3.304
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "- 1.4m of 9 g/t Ag, **0.49% Cu** - Four rigs continue to drill at Ballywire, with a fifth rig drilling at the Company's"
26-3552-58Ballywire · antimonyGrade: 0.02Grade Unit: %Intercept: 4.13 mView all detailsHide details
Identity
- Hole ID
- 26-3552-58
- Project
- Ballywire
- Commodity
- antimony
- Region
- ireland
- Reported Region
- ireland
- Ticker
- ZNG.V
Geometry
- Grade
- 0.02
- Grade Unit
- %
- Intercept
- 4.13 m
- True Width
- 3.304 m
- From
- 550.53 m
- To
- 554.66 m
- Intercept Depth
- 550.53 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- 26-3552-58:550.53-554.66
QA/QC
- Laboratory
- ALS Laboratories
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-10-14T00:00:00.000Z
Reasoning: The presence of antimony, even at a low grade, contributes to the polymetallic nature of the deeper mineralization.
Positive factors
- Presence of antimony, indicating polymetallic mineralization
- True width estimated at 80% of downhole length
Negative factors
- Low antimony grade
Evidence · table
“0.02”
Context: 4.13
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 3.304
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "- 1.4m of 9 g/t Ag, **0.49% Cu** - Four rigs continue to drill at Ballywire, with a fifth rig drilling at the Company's"
26-3552-58Ballywire · zincGrade: 0.04Grade Unit: %Intercept: 1.39 mView all detailsHide details
Identity
- Hole ID
- 26-3552-58
- Project
- Ballywire
- Commodity
- zinc
- Region
- ireland
- Reported Region
- ireland
- Ticker
- ZNG.V
Geometry
- Grade
- 0.04
- Grade Unit
- %
- Intercept
- 1.39 m
- True Width
- 1.112 m
- From
- 550.53 m
- To
- 551.92 m
- Intercept Depth
- 550.53 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- 26-3552-58:550.53-551.92
QA/QC
- Laboratory
- ALS Laboratories
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-10-14T00:00:00.000Z
Reasoning: While the zinc grade is very low, this narrow intercept shows a higher-grade copper-silver zone within the deeper mineralization.
Positive factors
- True width estimated at 80% of downhole length
Negative factors
- Very low zinc grade
- Narrow intercept
Evidence · table
“0.04”
Context: 1.39
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 1.112
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "- 1.4m of 9 g/t Ag, **0.49% Cu** - Four rigs continue to drill at Ballywire, with a fifth rig drilling at the Company's"
26-3552-58Ballywire · leadGrade: 0.01Grade Unit: %Intercept: 1.39 mView all detailsHide details
Identity
- Hole ID
- 26-3552-58
- Project
- Ballywire
- Commodity
- lead
- Region
- ireland
- Reported Region
- ireland
- Ticker
- ZNG.V
Geometry
- Grade
- 0.01
- Grade Unit
- %
- Intercept
- 1.39 m
- True Width
- 1.112 m
- From
- 550.53 m
- To
- 551.92 m
- Intercept Depth
- 550.53 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- 26-3552-58:550.53-551.92
QA/QC
- Laboratory
- ALS Laboratories
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-10-14T00:00:00.000Z
Reasoning: While the lead grade is very low, this narrow intercept shows a higher-grade copper-silver zone within the deeper mineralization.
Positive factors
- True width estimated at 80% of downhole length
Negative factors
- Very low lead grade
- Narrow intercept
Evidence · table
“0.01”
Context: 1.39
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 1.112
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "- 1.4m of 9 g/t Ag, **0.49% Cu** - Four rigs continue to drill at Ballywire, with a fifth rig drilling at the Company's"
26-3552-58Ballywire · silverGrade: 9.2Grade Unit: g/tIntercept: 1.39 mView all detailsHide details
Identity
- Hole ID
- 26-3552-58
- Project
- Ballywire
- Commodity
- silver
- Region
- ireland
- Reported Region
- ireland
- Ticker
- ZNG.V
Geometry
- Grade
- 9.2
- Grade Unit
- g/t
- Intercept
- 1.39 m
- True Width
- 1.112 m
- From
- 550.53 m
- To
- 551.92 m
- Intercept Depth
- 550.53 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- 26-3552-58:550.53-551.92
QA/QC
- Laboratory
- ALS Laboratories
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-10-14T00:00:00.000Z
Reasoning: This good silver grade over a narrow but significant width further enhances the polymetallic nature of the deeper mineralization, indicating a valuable, concentrated zone.
Positive factors
- Good silver grade over a narrow but significant interval for deeper mineralization
- True width estimated at 80% of downhole length
Evidence · table
“9.2”
Context: 1.39
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 1.112
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "- 1.4m of 9 g/t Ag, **0.49% Cu** - Four rigs continue to drill at Ballywire, with a fifth rig drilling at the Company's"
26-3552-58Ballywire · copperGrade: 0.49Grade Unit: %Intercept: 1.39 mView all detailsHide details
Identity
- Hole ID
- 26-3552-58
- Project
- Ballywire
- Commodity
- copper
- Region
- ireland
- Reported Region
- ireland
- Ticker
- ZNG.V
Geometry
- Grade
- 0.49
- Grade Unit
- %
- Intercept
- 1.39 m
- True Width
- 1.112 m
- From
- 550.53 m
- To
- 551.92 m
- Intercept Depth
- 550.53 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- 26-3552-58:550.53-551.92
QA/QC
- Laboratory
- ALS Laboratories
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-10-14T00:00:00.000Z
Reasoning: This very high-grade copper intercept further enhances the polymetallic nature of the deeper mineralization, indicating a valuable, concentrated zone.
Positive factors
- Very high-grade copper over a narrow but significant interval for deeper mineralization
- True width estimated at 80% of downhole length
Evidence · table
“0.49”
Context: 1.39
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 1.112
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "- 1.4m of 9 g/t Ag, **0.49% Cu** - Four rigs continue to drill at Ballywire, with a fifth rig drilling at the Company's"
26-3552-58Ballywire · antimonyGrade: 0.04Grade Unit: %Intercept: 1.39 mView all detailsHide details
Identity
- Hole ID
- 26-3552-58
- Project
- Ballywire
- Commodity
- antimony
- Region
- ireland
- Reported Region
- ireland
- Ticker
- ZNG.V
Geometry
- Grade
- 0.04
- Grade Unit
- %
- Intercept
- 1.39 m
- True Width
- 1.112 m
- From
- 550.53 m
- To
- 551.92 m
- Intercept Depth
- 550.53 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- 26-3552-58:550.53-551.92
QA/QC
- Laboratory
- ALS Laboratories
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-10-14T00:00:00.000Z
Reasoning: The presence of antimony, even at a low grade, contributes to the polymetallic nature of this very high-grade deeper mineralization.
Positive factors
- Presence of antimony, indicating polymetallic mineralization
- True width estimated at 80% of downhole length
Negative factors
- Low antimony grade
Evidence · table
“0.04”
Context: 1.39
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 1.112
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "- 1.4m of 9 g/t Ag, **0.49% Cu** - Four rigs continue to drill at Ballywire, with a fifth rig drilling at the Company's"
26-3552-59Ballywire · zincGrade: 0.03Grade Unit: %Intercept: 28.73 mView all detailsHide details
Identity
- Hole ID
- 26-3552-59
- Project
- Ballywire
- Commodity
- zinc
- Region
- ireland
- Reported Region
- ireland
- Ticker
- ZNG.V
Geometry
- Grade
- 0.03
- Grade Unit
- %
- Intercept
- 28.73 m
- True Width
- 25.857 m
- From
- 168.93 m
- To
- 197.66 m
- Intercept Depth
- 168.93 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- 26-3552-59:168.93-197.66
QA/QC
- Laboratory
- ALS Laboratories
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-10-14T00:00:00.000Z
Reasoning: This broad intercept, while low-grade, provides early evidence of a potential parallel zone of mineralization.
Positive factors
- Broad intercept length, indicating widespread mineralization
- True width estimated at 90% of downhole length
Negative factors
- Very low zinc grade
Evidence · table
“0.03”
Context: 28.73
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 25.857
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "- 1.4m of 9 g/t Ag, **0.49% Cu** - Four rigs continue to drill at Ballywire, with a fifth rig drilling at the Company's"
26-3552-59Ballywire · leadGrade: 0.06Grade Unit: %Intercept: 28.73 mView all detailsHide details
Identity
- Hole ID
- 26-3552-59
- Project
- Ballywire
- Commodity
- lead
- Region
- ireland
- Reported Region
- ireland
- Ticker
- ZNG.V
Geometry
- Grade
- 0.06
- Grade Unit
- %
- Intercept
- 28.73 m
- True Width
- 25.857 m
- From
- 168.93 m
- To
- 197.66 m
- Intercept Depth
- 168.93 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- 26-3552-59:168.93-197.66
QA/QC
- Laboratory
- ALS Laboratories
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-10-14T00:00:00.000Z
Reasoning: This broad intercept, while low-grade, provides early evidence of a potential parallel zone of mineralization.
Positive factors
- Broad intercept length, indicating widespread mineralization
- True width estimated at 90% of downhole length
Negative factors
- Very low lead grade
Evidence · table
“0.06”
Context: 28.73
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 25.857
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "- 1.4m of 9 g/t Ag, **0.49% Cu** - Four rigs continue to drill at Ballywire, with a fifth rig drilling at the Company's"
26-3552-59Ballywire · silverGrade: 0.3Grade Unit: g/tIntercept: 28.73 mView all detailsHide details
Identity
- Hole ID
- 26-3552-59
- Project
- Ballywire
- Commodity
- silver
- Region
- ireland
- Reported Region
- ireland
- Ticker
- ZNG.V
Geometry
- Grade
- 0.3
- Grade Unit
- g/t
- Intercept
- 28.73 m
- True Width
- 25.857 m
- From
- 168.93 m
- To
- 197.66 m
- Intercept Depth
- 168.93 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- 26-3552-59:168.93-197.66
QA/QC
- Laboratory
- ALS Laboratories
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-10-14T00:00:00.000Z
Reasoning: This broad intercept, while low-grade, provides early evidence of a potential parallel zone of mineralization.
Positive factors
- Broad intercept length, indicating widespread mineralization
- True width estimated at 90% of downhole length
Negative factors
- Very low silver grade
Evidence · table
“0.3”
Context: 28.73
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 25.857
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "- 1.4m of 9 g/t Ag, **0.49% Cu** - Four rigs continue to drill at Ballywire, with a fifth rig drilling at the Company's"
26-3552-59Ballywire · zincGrade: 0.29Grade Unit: %Intercept: 0.96 mView all detailsHide details
Identity
- Hole ID
- 26-3552-59
- Project
- Ballywire
- Commodity
- zinc
- Region
- ireland
- Reported Region
- ireland
- Ticker
- ZNG.V
Geometry
- Grade
- 0.29
- Grade Unit
- %
- Intercept
- 0.96 m
- True Width
- 0.864 m
- From
- 169.78 m
- To
- 170.74 m
- Intercept Depth
- 168.93 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- 26-3552-59:169.78-170.74
QA/QC
- Laboratory
- ALS Laboratories
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-10-14T00:00:00.000Z
Reasoning: This moderate zinc grade in a narrow intercept indicates a slightly higher-grade zone within the potential parallel mineralization.
Positive factors
- Moderate zinc grade in a narrow intercept
- True width estimated at 90% of downhole length
Negative factors
- Narrow intercept
Evidence · table
“0.29”
Context: 0.96
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 0.864
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "- 1.4m of 9 g/t Ag, **0.49% Cu** - Four rigs continue to drill at Ballywire, with a fifth rig drilling at the Company's"
26-3552-59Ballywire · leadGrade: 0.26Grade Unit: %Intercept: 0.96 mView all detailsHide details
Identity
- Hole ID
- 26-3552-59
- Project
- Ballywire
- Commodity
- lead
- Region
- ireland
- Reported Region
- ireland
- Ticker
- ZNG.V
Geometry
- Grade
- 0.26
- Grade Unit
- %
- Intercept
- 0.96 m
- True Width
- 0.864 m
- From
- 169.78 m
- To
- 170.74 m
- Intercept Depth
- 168.93 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- 26-3552-59:169.78-170.74
QA/QC
- Laboratory
- ALS Laboratories
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-10-14T00:00:00.000Z
Reasoning: This moderate lead grade in a narrow intercept indicates a slightly higher-grade zone within the potential parallel mineralization.
Positive factors
- Moderate lead grade in a narrow intercept
- True width estimated at 90% of downhole length
Negative factors
- Narrow intercept
Evidence · table
“0.26”
Context: 0.96
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 0.864
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "- 1.4m of 9 g/t Ag, **0.49% Cu** - Four rigs continue to drill at Ballywire, with a fifth rig drilling at the Company's"
26-3552-59Ballywire · silverGrade: 1.1Grade Unit: g/tIntercept: 0.96 mView all detailsHide details
Identity
- Hole ID
- 26-3552-59
- Project
- Ballywire
- Commodity
- silver
- Region
- ireland
- Reported Region
- ireland
- Ticker
- ZNG.V
Geometry
- Grade
- 1.1
- Grade Unit
- g/t
- Intercept
- 0.96 m
- True Width
- 0.864 m
- From
- 169.78 m
- To
- 170.74 m
- Intercept Depth
- 168.93 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- 26-3552-59:169.78-170.74
QA/QC
- Laboratory
- ALS Laboratories
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-10-14T00:00:00.000Z
Reasoning: This moderate silver grade in a narrow intercept indicates a slightly higher-grade zone within the potential parallel mineralization.
Positive factors
- Moderate silver grade in a narrow intercept
- True width estimated at 90% of downhole length
Negative factors
- Narrow intercept
Evidence · table
“1.1”
Context: 0.96
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 0.864
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "- 1.4m of 9 g/t Ag, **0.49% Cu** - Four rigs continue to drill at Ballywire, with a fifth rig drilling at the Company's"
26-3552-59Ballywire · zincGrade: 0.01Grade Unit: %Intercept: 4.62 mView all detailsHide details
Identity
- Hole ID
- 26-3552-59
- Project
- Ballywire
- Commodity
- zinc
- Region
- ireland
- Reported Region
- ireland
- Ticker
- ZNG.V
Geometry
- Grade
- 0.01
- Grade Unit
- %
- Intercept
- 4.62 m
- True Width
- 4.158 m
- From
- 193.04 m
- To
- 197.66 m
- Intercept Depth
- 193.04 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- 26-3552-59:193.04-197.66
QA/QC
- Laboratory
- ALS Laboratories
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-10-14T00:00:00.000Z
Reasoning: This intercept, while low-grade, further supports the presence of a potential parallel zone of mineralization.
Positive factors
- Good intercept length for potential parallel zone
- True width estimated at 90% of downhole length
Negative factors
- Very low zinc grade
Evidence · table
“0.01”
Context: 4.62
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 4.158
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "- 1.4m of 9 g/t Ag, **0.49% Cu** - Four rigs continue to drill at Ballywire, with a fifth rig drilling at the Company's"
26-3552-59Ballywire · leadGrade: 0.12Grade Unit: %Intercept: 4.62 mView all detailsHide details
Identity
- Hole ID
- 26-3552-59
- Project
- Ballywire
- Commodity
- lead
- Region
- ireland
- Reported Region
- ireland
- Ticker
- ZNG.V
Geometry
- Grade
- 0.12
- Grade Unit
- %
- Intercept
- 4.62 m
- True Width
- 4.158 m
- From
- 193.04 m
- To
- 197.66 m
- Intercept Depth
- 193.04 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- 26-3552-59:193.04-197.66
QA/QC
- Laboratory
- ALS Laboratories
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-10-14T00:00:00.000Z
Reasoning: This moderate lead grade over a good width further supports the presence of a potential parallel zone of mineralization.
Positive factors
- Moderate lead grade over a good width for potential parallel zone
- True width estimated at 90% of downhole length
Evidence · table
“0.12”
Context: 4.62
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 4.158
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "- 1.4m of 9 g/t Ag, **0.49% Cu** - Four rigs continue to drill at Ballywire, with a fifth rig drilling at the Company's"
26-3552-59Ballywire · silverGrade: 0.3Grade Unit: g/tIntercept: 4.62 mView all detailsHide details
Identity
- Hole ID
- 26-3552-59
- Project
- Ballywire
- Commodity
- silver
- Region
- ireland
- Reported Region
- ireland
- Ticker
- ZNG.V
Geometry
- Grade
- 0.3
- Grade Unit
- g/t
- Intercept
- 4.62 m
- True Width
- 4.158 m
- From
- 193.04 m
- To
- 197.66 m
- Intercept Depth
- 193.04 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- 26-3552-59:193.04-197.66
QA/QC
- Laboratory
- ALS Laboratories
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-10-14T00:00:00.000Z
Reasoning: This intercept, while low-grade, further supports the presence of a potential parallel zone of mineralization.
Positive factors
- Good intercept length for potential parallel zone
- True width estimated at 90% of downhole length
Negative factors
- Very low silver grade
Evidence · table
“0.3”
Context: 4.62
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 4.158
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "- 1.4m of 9 g/t Ag, **0.49% Cu** - Four rigs continue to drill at Ballywire, with a fifth rig drilling at the Company's"
26-3552-59Ballywire · leadGrade: 0.01Grade Unit: %Intercept: 2.68 mView all detailsHide details
Identity
- Hole ID
- 26-3552-59
- Project
- Ballywire
- Commodity
- lead
- Region
- ireland
- Reported Region
- ireland
- Ticker
- ZNG.V
Geometry
- Grade
- 0.01
- Grade Unit
- %
- Intercept
- 2.68 m
- True Width
- 1.876 m
- From
- 304.29 m
- To
- 306.97 m
- Intercept Depth
- 304.29 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- 26-3552-59:304.29-306.97
QA/QC
- Laboratory
- ALS Laboratories
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-10-14T00:00:00.000Z
Reasoning: While the lead grade is very low, this intercept indicates deeper copper-silver mineralization in the potential parallel zone.
Positive factors
- Good intercept length for deeper mineralization
- True width estimated at 70% of downhole length
Negative factors
- Very low lead grade
Evidence · table
“0.01”
Context: 2.68
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 1.876
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "- 1.4m of 9 g/t Ag, **0.49% Cu** - Four rigs continue to drill at Ballywire, with a fifth rig drilling at the Company's"
26-3552-59Ballywire · silverGrade: 3.4Grade Unit: g/tIntercept: 2.68 mView all detailsHide details
Identity
- Hole ID
- 26-3552-59
- Project
- Ballywire
- Commodity
- silver
- Region
- ireland
- Reported Region
- ireland
- Ticker
- ZNG.V
Geometry
- Grade
- 3.4
- Grade Unit
- g/t
- Intercept
- 2.68 m
- True Width
- 1.876 m
- From
- 304.29 m
- To
- 306.97 m
- Intercept Depth
- 304.29 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- 26-3552-59:304.29-306.97
QA/QC
- Laboratory
- ALS Laboratories
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-10-14T00:00:00.000Z
Reasoning: This moderate silver grade over a good width contributes to the polymetallic nature of the deeper mineralization in the potential parallel zone.
Positive factors
- Moderate silver grade over a good width for deeper mineralization
- True width estimated at 70% of downhole length
Evidence · table
“3.4”
Context: 2.68
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 1.876
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "- 1.4m of 9 g/t Ag, **0.49% Cu** - Four rigs continue to drill at Ballywire, with a fifth rig drilling at the Company's"
26-3552-59Ballywire · copperGrade: 0.08Grade Unit: %Intercept: 2.68 mView all detailsHide details
Identity
- Hole ID
- 26-3552-59
- Project
- Ballywire
- Commodity
- copper
- Region
- ireland
- Reported Region
- ireland
- Ticker
- ZNG.V
Geometry
- Grade
- 0.08
- Grade Unit
- %
- Intercept
- 2.68 m
- True Width
- 1.876 m
- From
- 304.29 m
- To
- 306.97 m
- Intercept Depth
- 304.29 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- 26-3552-59:304.29-306.97
QA/QC
- Laboratory
- ALS Laboratories
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-10-14T00:00:00.000Z
Reasoning: This moderate copper grade over a good width contributes to the polymetallic nature of the deeper mineralization in the potential parallel zone.
Positive factors
- Moderate copper grade over a good width for deeper mineralization
- True width estimated at 70% of downhole length
Evidence · table
“0.08”
Context: 2.68
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 1.876
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "- 1.4m of 9 g/t Ag, **0.49% Cu** - Four rigs continue to drill at Ballywire, with a fifth rig drilling at the Company's"
26-3552-61Ballywire · zincGrade: 0.08Grade Unit: %Intercept: 43.37 mView all detailsHide details
Identity
- Hole ID
- 26-3552-61
- Project
- Ballywire
- Commodity
- zinc
- Region
- ireland
- Reported Region
- ireland
- Ticker
- ZNG.V
Geometry
- Grade
- 0.08
- Grade Unit
- %
- Intercept
- 43.37 m
- True Width
- 39.033 m
- From
- 355.4 m
- To
- 398.77 m
- Intercept Depth
- 355.4 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- 26-3552-61:355.4-398.77
QA/QC
- Laboratory
- ALS Laboratories
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-10-14T00:00:00.000Z
Reasoning: This very broad intercept, while low-grade, indicates widespread mineralization downdip of a known high-grade zone.
Positive factors
- Very broad intercept length, indicating widespread mineralization
- True width estimated at 90% of downhole length
Negative factors
- Very low zinc grade
Evidence · table
“0.08”
Context: 43.37
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 39.033
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "- 1.4m of 9 g/t Ag, **0.49% Cu** - Four rigs continue to drill at Ballywire, with a fifth rig drilling at the Company's"
26-3552-61Ballywire · leadGrade: 0.02Grade Unit: %Intercept: 43.37 mView all detailsHide details
Identity
- Hole ID
- 26-3552-61
- Project
- Ballywire
- Commodity
- lead
- Region
- ireland
- Reported Region
- ireland
- Ticker
- ZNG.V
Geometry
- Grade
- 0.02
- Grade Unit
- %
- Intercept
- 43.37 m
- True Width
- 39.033 m
- From
- 355.4 m
- To
- 398.77 m
- Intercept Depth
- 355.4 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- 26-3552-61:355.4-398.77
QA/QC
- Laboratory
- ALS Laboratories
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-10-14T00:00:00.000Z
Reasoning: This very broad intercept, while low-grade, indicates widespread mineralization downdip of a known high-grade zone.
Positive factors
- Very broad intercept length, indicating widespread mineralization
- True width estimated at 90% of downhole length
Negative factors
- Very low lead grade
Evidence · table
“0.02”
Context: 43.37
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 39.033
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "- 1.4m of 9 g/t Ag, **0.49% Cu** - Four rigs continue to drill at Ballywire, with a fifth rig drilling at the Company's"
26-3552-61Ballywire · silverGrade: 0.6Grade Unit: g/tIntercept: 43.37 mView all detailsHide details
Identity
- Hole ID
- 26-3552-61
- Project
- Ballywire
- Commodity
- silver
- Region
- ireland
- Reported Region
- ireland
- Ticker
- ZNG.V
Geometry
- Grade
- 0.6
- Grade Unit
- g/t
- Intercept
- 43.37 m
- True Width
- 39.033 m
- From
- 355.4 m
- To
- 398.77 m
- Intercept Depth
- 355.4 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- 26-3552-61:355.4-398.77
QA/QC
- Laboratory
- ALS Laboratories
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-10-14T00:00:00.000Z
Reasoning: This very broad intercept, while low-grade, indicates widespread mineralization downdip of a known high-grade zone.
Positive factors
- Very broad intercept length, indicating widespread mineralization
- True width estimated at 90% of downhole length
Negative factors
- Very low silver grade
Evidence · table
“0.6”
Context: 43.37
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 39.033
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "- 1.4m of 9 g/t Ag, **0.49% Cu** - Four rigs continue to drill at Ballywire, with a fifth rig drilling at the Company's"
26-3552-61Ballywire · zincGrade: 0.22Grade Unit: %Intercept: 8.28 mView all detailsHide details
Identity
- Hole ID
- 26-3552-61
- Project
- Ballywire
- Commodity
- zinc
- Region
- ireland
- Reported Region
- ireland
- Ticker
- ZNG.V
Geometry
- Grade
- 0.22
- Grade Unit
- %
- Intercept
- 8.28 m
- True Width
- 7.452 m
- From
- 382.78 m
- To
- 391.06 m
- Intercept Depth
- 355.4 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- 26-3552-61:382.78-391.06
QA/QC
- Laboratory
- ALS Laboratories
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-10-14T00:00:00.000Z
Reasoning: This moderate zinc grade over a good width indicates continuous mineralization downdip of a known high-grade zone.
Positive factors
- Good intercept length for downdip mineralization
- Moderate zinc grade
- True width estimated at 90% of downhole length
Evidence · table
“0.22”
Context: 8.28
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 7.452
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "- 1.4m of 9 g/t Ag, **0.49% Cu** - Four rigs continue to drill at Ballywire, with a fifth rig drilling at the Company's"
26-3552-61Ballywire · leadGrade: 0.05Grade Unit: %Intercept: 8.28 mView all detailsHide details
Identity
- Hole ID
- 26-3552-61
- Project
- Ballywire
- Commodity
- lead
- Region
- ireland
- Reported Region
- ireland
- Ticker
- ZNG.V
Geometry
- Grade
- 0.05
- Grade Unit
- %
- Intercept
- 8.28 m
- True Width
- 7.452 m
- From
- 382.78 m
- To
- 391.06 m
- Intercept Depth
- 355.4 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- 26-3552-61:382.78-391.06
QA/QC
- Laboratory
- ALS Laboratories
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-10-14T00:00:00.000Z
Reasoning: This moderate lead grade over a good width indicates continuous mineralization downdip of a known high-grade zone.
Positive factors
- Good intercept length for downdip mineralization
- Moderate lead grade
- True width estimated at 90% of downhole length
Evidence · table
“0.05”
Context: 8.28
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 7.452
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "- 1.4m of 9 g/t Ag, **0.49% Cu** - Four rigs continue to drill at Ballywire, with a fifth rig drilling at the Company's"
26-3552-61Ballywire · silverGrade: 1.7Grade Unit: g/tIntercept: 8.28 mView all detailsHide details
Identity
- Hole ID
- 26-3552-61
- Project
- Ballywire
- Commodity
- silver
- Region
- ireland
- Reported Region
- ireland
- Ticker
- ZNG.V
Geometry
- Grade
- 1.7
- Grade Unit
- g/t
- Intercept
- 8.28 m
- True Width
- 7.452 m
- From
- 382.78 m
- To
- 391.06 m
- Intercept Depth
- 355.4 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- 26-3552-61:382.78-391.06
QA/QC
- Laboratory
- ALS Laboratories
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-10-14T00:00:00.000Z
Reasoning: This moderate silver grade over a good width indicates continuous mineralization downdip of a known high-grade zone.
Positive factors
- Good intercept length for downdip mineralization
- Moderate silver grade
- True width estimated at 90% of downhole length
Evidence · table
“1.7”
Context: 8.28
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 7.452
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "- 1.4m of 9 g/t Ag, **0.49% Cu** - Four rigs continue to drill at Ballywire, with a fifth rig drilling at the Company's"
26-3552-61Ballywire · zincGrade: 0.31Grade Unit: %Intercept: 4.62 mView all detailsHide details
Identity
- Hole ID
- 26-3552-61
- Project
- Ballywire
- Commodity
- zinc
- Region
- ireland
- Reported Region
- ireland
- Ticker
- ZNG.V
Geometry
- Grade
- 0.31
- Grade Unit
- %
- Intercept
- 4.62 m
- True Width
- 4.158 m
- From
- 386.44 m
- To
- 391.06 m
- Intercept Depth
- 355.4 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- 26-3552-61:386.44-391.06
QA/QC
- Laboratory
- ALS Laboratories
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-10-14T00:00:00.000Z
Reasoning: This moderate zinc grade over a good width indicates a continuous, slightly higher-grade zone downdip.
Positive factors
- Good intercept length for downdip mineralization
- Moderate zinc grade
- True width estimated at 90% of downhole length
Evidence · table
“0.31”
Context: 4.62
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 4.158
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "- 1.4m of 9 g/t Ag, **0.49% Cu** - Four rigs continue to drill at Ballywire, with a fifth rig drilling at the Company's"
26-3552-61Ballywire · leadGrade: 0.03Grade Unit: %Intercept: 4.62 mView all detailsHide details
Identity
- Hole ID
- 26-3552-61
- Project
- Ballywire
- Commodity
- lead
- Region
- ireland
- Reported Region
- ireland
- Ticker
- ZNG.V
Geometry
- Grade
- 0.03
- Grade Unit
- %
- Intercept
- 4.62 m
- True Width
- 4.158 m
- From
- 386.44 m
- To
- 391.06 m
- Intercept Depth
- 355.4 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- 26-3552-61:386.44-391.06
QA/QC
- Laboratory
- ALS Laboratories
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-10-14T00:00:00.000Z
Reasoning: This moderate lead grade over a good width indicates a continuous, slightly higher-grade zone downdip.
Positive factors
- Good intercept length for downdip mineralization
- Moderate lead grade
- True width estimated at 90% of downhole length
Evidence · table
“0.03”
Context: 4.62
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 4.158
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "- 1.4m of 9 g/t Ag, **0.49% Cu** - Four rigs continue to drill at Ballywire, with a fifth rig drilling at the Company's"
How Atlas produces this analysis
Minestarters Atlas uses automated extraction to summarize mining announcements, identify reported measurements, and classify supporting evidence. Sentiment reflects the extracted narrative and classification rules; it is an interpretation, not a reported measurement. Evidence quotes and context are provided where available. Missing data, low-confidence results, and review flags indicate limitations. Check the original publisher announcement before relying on an interpretation.