Green Bridge Metals Intersects 195.0 Metres Grading 0.25% Cu and 10.18% TiO2 at Titac South, Minnesota; Step-Out Hole Confirms Mineralization at Previously Untested Geophysical Target

Original announcement by cse on

Company
Green Bridge Metals Corporation
Ticker
GRBM
Exchange
CSE
Region
northeastern Minnesota, U.S.A.
Primary commodity
Titanium
Secondary commodities
Copper, Vanadium, Pge
Document categories
Drill results, Other
Extracted
2026-10-01 01:23:55 UTC

Analysis by Minestarters Atlas

Atlas analysis published:

Minestarters Atlas analysis

Summary

Green Bridge Metals reported final assay results from its Phase 1 diamond drill program at the Titac Project in Minnesota. Highlights include drill hole TS26-004a intersecting 195.0m grading 0.25% Cu and 10.18% TiO₂, including a higher-grade sub-interval. An exploratory step-out hole, TS26-007, successfully intersected mineralization at a previously untested geophysical target, validating the company's targeting approach. The company plans to accelerate its Phase 2 drilling program to expand the existing titanium resource and include copper, aiming to support a scoping study by the end of 2027.

Reasoning: The drill results confirm and extend mineralization at Titac South, with a significant step-out hole validating the exploration model. The grades for TiO2 are strong, and copper grades are moderate for a bulk tonnage deposit. The acceleration of Phase 2 drilling and plans for a scoping study indicate positive momentum, though the lack of true width disclosure and the inferred nature of the existing resource are minor drawbacks.

Positive factors

  • Significant intercept lengths for copper and titanium dioxide, confirming and extending mineralization.
  • Successful validation of 3D VTEM inversion modelling as an effective targeting tool for new mineralized zones.
  • Step-out drilling intersected mineralization at a previously untested geophysical target, indicating exploration upside.
  • All Phase 1 holes intersected sulphide mineralization, consistent with the geological model.
  • Acceleration of Phase 2 drilling program to expand existing resource and include copper.

Negative factors

  • True widths cannot currently be determined with confidence due to irregular geometry, potentially overstating apparent lengths.
  • No specific QA/QC methods (blanks, standards, duplicates) disclosed in the release, only analytical methods.
  • The existing resource is Inferred, which has a high degree of uncertainty.

Facts used in scoring: 56

Classification and evidence

True Width Disclosedpositive

Actual thickness perpendicular to structure is stated, not just downhole length.

Why it applies: The document explicitly states that 'True widths cannot currently be determined with confidence because of the irregular geometry of the mineralized zones.'

Evidence · text

“All reported intervals are downhole lengths. True widths cannot currently be determined with confidence because of the irregular geometry of the mineralized zones.”

QA/QC Disclosedpositive

Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).

Why it applies: The release mentions that 'Green Bridge Metals exploration samples were collected in accordance with industry standards and best practices' and names 'Activation Laboratories Ltd.' as the analytical lab, which is independent of the Company. It also mentions a Qualified Person.

Evidence · text

“Green Bridge Metals exploration samples were collected in accordance with industry standards and best practices. All samples were submitted to Activation Laboratories Ltd. in Thunder Bay, Ontario, for geochemical analysis. Analytical methods included fire assay with ICP-OES analysis for gold and platinum group elements, sodium peroxide fusion with ICP-OES analysis for trace elements, and lithium metaborate fused-disc XRF analysis for major element composition. Activation Laboratories Ltd. is independent of the Company.”

QP/CP Signedpositive · Story-specific tag

Qualified Person (QP) or Competent Person (CP) named and signed off — a member of a recognized professional association (e.g., AusIMM, SME, AIG, P.Geo) with relevant experience.

Why it applies: The news release states that 'George Hudak, Chief Geologist of Green Bridge Metals Corporation, who is a Qualified Person as defined by NI 43-101' reviewed and approved the scientific and technical information.

Evidence · text

“The scientific and technical information contained in this news release has been reviewed and approved by George Hudak, Chief Geologist of Green Bridge Metals Corporation, who is a Qualified Person as defined by NI 43-101.”

Step-Out Extensionpositive

Mineralization extended beyond the previously known limit.

Why it applies: The document highlights an 'Exploratory step-out hole TS26-007, testing a previously untested geophysical target' which successfully intersected mineralization.

Evidence · text

“Exploratory step-out hole TS26-007, testing a previously untested geophysical target, returned 12.0 m @ 0.20% Cu, 8.33% TiO₂, 0.15% V₂O₅, intersecting mineralization associated with the geophysical anomaly.”

Inferred Resourcenegative · Story-specific tag

Speculative category — limited drilling, geological continuity assumed but not confirmed. Cannot support economic studies alone.

Why it applies: The document mentions an 'inferred mineral resource estimate of 46.6 million tonnes grading 15% TiO₂' at Titac South.

Evidence · text

“Titac South hosts an inferred mineral resource estimate of 46.6 million tonnes grading 15% TiO₂”

Extracted facts

Stored fact records: 56. Some facts used in scoring do not have a stored record.

Drill Results (56)

TS26-004aTitac South · copperGrade: 0.25Grade Unit: %Intercept: 195 mView all details
Link to this fact

Identity

Hole ID
TS26-004a
Project
Titac South
Commodity
copper
Region
usa
Reported Region
usa
Ticker
GRBM

Geometry

Grade
0.25
Grade Unit
%
Intercept
195 m
From
65 m
To
261 m
Intercept Depth
65 m

Classification

Deposit Type
OUI
Program
mixed
Sample Type
drill
Group ID
TS26-004a:65-261
Mining Method
open_pit

QA/QC

Laboratory
Activation Laboratories Ltd.
QA/QC Disclosed
Yes
QP Signed
Yes
QA/QC Methods
standards

Deleterious

Deleterious Flag
No

Metal Equivalent

Assumptions Disclosed
No

Review

Needs Review
No
Interp. Status
scored
Historical
No

Dates

Event date
2026-09-10T00:00:00.000Z

Reasoning: This intercept confirms existing mineralization with a good length and moderate copper grade for an Oxide Ultramafic Intrusion deposit, contributing positively to the project's understanding.

Positive factors

  • Significant intercept length of 195.0m.
  • Moderate copper grade for a bulk tonnage deposit.
  • Confirms existing mineralization.

Negative factors

  • True width not determined, potentially overstating length.

Evidence · text

“At Titac South, drill hole TS26-004a intersected 195.0m grading 0.25% Cu and 10.18% TiO₂, including 62.0m grading 0.29% Cu and 10.54% TiO₂. The core hole transected the southwest portion of the mineralized zone from southeast to northwest and confirmed the existing mineralization.”

Tags used in scoring

QA/QC Disclosedpositive

Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).

Why it applies: qaqc_disclosed is true

Cut-off Undisclosednegative

High-grade interval reported without stating the cut-off grade used for compositing.

Why it applies: no cutoff_grade was stated

Infill Drillingneutral

Confirmatory drilling to raise resource confidence, not new discovery.

Why it applies: drill_program_type is "mixed"

TS26-004aTitac South · titaniumGrade: 10.18Grade Unit: %Intercept: 195 mView all details
Link to this fact

Identity

Hole ID
TS26-004a
Project
Titac South
Commodity
titanium
Region
usa
Reported Region
usa
Ticker
GRBM

Geometry

Grade
10.18
Grade Unit
%
Intercept
195 m
From
65 m
To
261 m
Intercept Depth
65 m

Classification

Deposit Type
OUI
Program
mixed
Sample Type
drill
Group ID
TS26-004a:65-261
Mining Method
open_pit

QA/QC

Laboratory
Activation Laboratories Ltd.
QA/QC Disclosed
Yes
QP Signed
Yes
QA/QC Methods
standards

Deleterious

Deleterious Flag
No

Metal Equivalent

Assumptions Disclosed
No

Review

Needs Review
No
Interp. Status
scored
Historical
No

Dates

Event date
2026-09-10T00:00:00.000Z

Reasoning: This intercept confirms existing mineralization with a good length and strong titanium dioxide grade, which is a primary commodity for the project, contributing positively to the project's understanding.

Positive factors

  • Significant intercept length of 195.0m.
  • Strong titanium dioxide grade for an Oxide Ultramafic Intrusion deposit.
  • Confirms existing mineralization.

Negative factors

  • True width not determined, potentially overstating length.

Evidence · text

“At Titac South, drill hole TS26-004a intersected 195.0m grading 0.25% Cu and 10.18% TiO₂, including 62.0m grading 0.29% Cu and 10.54% TiO₂. The core hole transected the southwest portion of the mineralized zone from southeast to northwest and confirmed the existing mineralization.”

Tags used in scoring

QA/QC Disclosedpositive

Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).

Why it applies: qaqc_disclosed is true

Cut-off Undisclosednegative

High-grade interval reported without stating the cut-off grade used for compositing.

Why it applies: no cutoff_grade was stated

Infill Drillingneutral

Confirmatory drilling to raise resource confidence, not new discovery.

Why it applies: drill_program_type is "mixed"

TS26-004aTitac South · copperGrade: 0.29Grade Unit: %Intercept: 62 mView all details
Link to this fact

Identity

Hole ID
TS26-004a
Project
Titac South
Commodity
copper
Region
usa
Reported Region
usa
Ticker
GRBM

Geometry

Grade
0.29
Grade Unit
%
Intercept
62 m
From
127 m
To
189 m
Intercept Depth
65 m

Classification

Deposit Type
OUI
Program
mixed
Sample Type
drill
Group ID
TS26-004a:127-189
Mining Method
open_pit

QA/QC

Laboratory
Activation Laboratories Ltd.
QA/QC Disclosed
Yes
QP Signed
Yes
QA/QC Methods
standards

Deleterious

Deleterious Flag
No

Metal Equivalent

Assumptions Disclosed
No

Review

Needs Review
No
Interp. Status
scored
Historical
No

Dates

Event date
2026-09-10T00:00:00.000Z

Reasoning: This is a higher-grade sub-interval within a broader intercept, indicating a more concentrated zone of copper mineralization.

Positive factors

  • Good intercept length of 62.0m.
  • Higher copper grade than the broader interval.

Negative factors

  • True width not determined, potentially overstating length.

Evidence · text

“At Titac South, drill hole TS26-004a intersected 195.0m grading 0.25% Cu and 10.18% TiO₂, including 62.0m grading 0.29% Cu and 10.54% TiO₂.”

Tags used in scoring

QA/QC Disclosedpositive

Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).

Why it applies: qaqc_disclosed is true

Cut-off Undisclosednegative

High-grade interval reported without stating the cut-off grade used for compositing.

Why it applies: no cutoff_grade was stated

Infill Drillingneutral

Confirmatory drilling to raise resource confidence, not new discovery.

Why it applies: drill_program_type is "mixed"

TS26-004aTitac South · titaniumGrade: 10.54Grade Unit: %Intercept: 62 mView all details
Link to this fact

Identity

Hole ID
TS26-004a
Project
Titac South
Commodity
titanium
Region
usa
Reported Region
usa
Ticker
GRBM

Geometry

Grade
10.54
Grade Unit
%
Intercept
62 m
From
127 m
To
189 m
Intercept Depth
65 m

Classification

Deposit Type
OUI
Program
mixed
Sample Type
drill
Group ID
TS26-004a:127-189
Mining Method
open_pit

QA/QC

Laboratory
Activation Laboratories Ltd.
QA/QC Disclosed
Yes
QP Signed
Yes
QA/QC Methods
standards

Deleterious

Deleterious Flag
No

Metal Equivalent

Assumptions Disclosed
No

Review

Needs Review
No
Interp. Status
scored
Historical
No

Dates

Event date
2026-09-10T00:00:00.000Z

Reasoning: This is a higher-grade sub-interval within a broader intercept, indicating a more concentrated zone of titanium dioxide mineralization.

Positive factors

  • Good intercept length of 62.0m.
  • Strong titanium dioxide grade, slightly higher than the broader interval.

Negative factors

  • True width not determined, potentially overstating length.

Evidence · text

“At Titac South, drill hole TS26-004a intersected 195.0m grading 0.25% Cu and 10.18% TiO₂, including 62.0m grading 0.29% Cu and 10.54% TiO₂.”

Tags used in scoring

QA/QC Disclosedpositive

Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).

Why it applies: qaqc_disclosed is true

Cut-off Undisclosednegative

High-grade interval reported without stating the cut-off grade used for compositing.

Why it applies: no cutoff_grade was stated

Infill Drillingneutral

Confirmatory drilling to raise resource confidence, not new discovery.

Why it applies: drill_program_type is "mixed"

TS26-007Titac South · copperGrade: 0.2Grade Unit: %Intercept: 12 mView all details
Link to this fact

Identity

Hole ID
TS26-007
Project
Titac South
Commodity
copper
Region
usa
Reported Region
usa
Ticker
GRBM

Geometry

Grade
0.2
Grade Unit
%
Intercept
12 m
From
252 m
To
264 m
Intercept Depth
252 m

Classification

Deposit Type
OUI
Program
exploration
Sample Type
drill
Group ID
TS26-007:252-264
Mining Method
open_pit

QA/QC

Laboratory
Activation Laboratories Ltd.
QA/QC Disclosed
Yes
QP Signed
Yes
QA/QC Methods
standards

Deleterious

Deleterious Flag
No

Metal Equivalent

Assumptions Disclosed
No

Review

Needs Review
No
Interp. Status
scored
Historical
No

Dates

Event date
2026-09-10T00:00:00.000Z

Reasoning: This intercept is highly novel as it validates the company's exploration model by confirming mineralization at a new target, opening up significant exploration potential, despite the moderate grade and narrow width.

Positive factors

  • Successfully intersected mineralization at a previously untested geophysical target.
  • Validates the 3D VTEM inversion model as an effective targeting tool.
  • Moderate copper grade for a bulk tonnage deposit.

Negative factors

  • Relatively narrow intercept length.
  • True width not determined, potentially overstating length.

Evidence · text

“Exploratory step-out hole TS26-007, testing a previously untested geophysical target, returned 12.0 m @ 0.20% Cu, 8.33% TiO₂, 0.15% V₂O₅, intersecting mineralization associated with the geophysical anomaly.”

Tags used in scoring

QA/QC Disclosedpositive

Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).

Why it applies: qaqc_disclosed is true

Cut-off Undisclosednegative

High-grade interval reported without stating the cut-off grade used for compositing.

Why it applies: no cutoff_grade was stated

TS26-007Titac South · titaniumGrade: 8.33Grade Unit: %Intercept: 12 mView all details
Link to this fact

Identity

Hole ID
TS26-007
Project
Titac South
Commodity
titanium
Region
usa
Reported Region
usa
Ticker
GRBM

Geometry

Grade
8.33
Grade Unit
%
Intercept
12 m
From
252 m
To
264 m
Intercept Depth
252 m

Classification

Deposit Type
OUI
Program
exploration
Sample Type
drill
Group ID
TS26-007:252-264
Mining Method
open_pit

QA/QC

Laboratory
Activation Laboratories Ltd.
QA/QC Disclosed
Yes
QP Signed
Yes
QA/QC Methods
standards

Deleterious

Deleterious Flag
No

Metal Equivalent

Assumptions Disclosed
No

Review

Needs Review
No
Interp. Status
scored
Historical
No

Dates

Event date
2026-09-10T00:00:00.000Z

Reasoning: This intercept is highly novel as it validates the company's exploration model by confirming mineralization at a new target, opening up significant exploration potential, despite the narrow width.

Positive factors

  • Successfully intersected mineralization at a previously untested geophysical target.
  • Validates the 3D VTEM inversion model as an effective targeting tool.
  • Strong titanium dioxide grade.

Negative factors

  • Relatively narrow intercept length.
  • True width not determined, potentially overstating length.

Evidence · text

“Exploratory step-out hole TS26-007, testing a previously untested geophysical target, returned 12.0 m @ 0.20% Cu, 8.33% TiO₂, 0.15% V₂O₅, intersecting mineralization associated with the geophysical anomaly.”

Tags used in scoring

QA/QC Disclosedpositive

Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).

Why it applies: qaqc_disclosed is true

Cut-off Undisclosednegative

High-grade interval reported without stating the cut-off grade used for compositing.

Why it applies: no cutoff_grade was stated

TS26-007Titac South · vanadiumGrade: 0.15Grade Unit: %Intercept: 12 mView all details
Link to this fact

Identity

Hole ID
TS26-007
Project
Titac South
Commodity
vanadium
Region
usa
Reported Region
usa
Ticker
GRBM

Geometry

Grade
0.15
Grade Unit
%
Intercept
12 m
From
252 m
To
264 m
Intercept Depth
252 m

Classification

Deposit Type
OUI
Program
exploration
Sample Type
drill
Group ID
TS26-007:252-264
Mining Method
open_pit

QA/QC

Laboratory
Activation Laboratories Ltd.
QA/QC Disclosed
Yes
QP Signed
Yes
QA/QC Methods
standards

Deleterious

Deleterious Flag
No

Metal Equivalent

Assumptions Disclosed
No

Review

Needs Review
No
Interp. Status
scored
Historical
No

Dates

Event date
2026-09-10T00:00:00.000Z

Reasoning: This intercept is highly novel as it validates the company's exploration model by confirming mineralization at a new target, opening up significant exploration potential, despite the narrow width.

Positive factors

  • Successfully intersected mineralization at a previously untested geophysical target.
  • Validates the 3D VTEM inversion model as an effective targeting tool.

Negative factors

  • Relatively narrow intercept length.
  • True width not determined, potentially overstating length.

Evidence · text

“Exploratory step-out hole TS26-007, testing a previously untested geophysical target, returned 12.0 m @ 0.20% Cu, 8.33% TiO₂, 0.15% V₂O₅, intersecting mineralization associated with the geophysical anomaly.”

Tags used in scoring

QA/QC Disclosedpositive

Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).

Why it applies: qaqc_disclosed is true

Cut-off Undisclosednegative

High-grade interval reported without stating the cut-off grade used for compositing.

Why it applies: no cutoff_grade was stated

TS26-001Titac South · copperGrade: 0.08Grade Unit: %Intercept: 272.8 mView all details
Link to this fact

Identity

Hole ID
TS26-001
Project
Titac South
Commodity
copper
Region
usa
Reported Region
usa
Ticker
GRBM

Geometry

Grade
0.08
Grade Unit
%
Intercept
272.8 m
From
26.2 m
To
299 m
Intercept Depth
26.2 m

Classification

Deposit Type
OUI
Program
mixed
Sample Type
drill
Group ID
TS26-001:26.2-299
Mining Method
open_pit

QA/QC

Laboratory
Activation Laboratories Ltd.
QA/QC Disclosed
Yes
QP Signed
Yes
QA/QC Methods
standards

Deleterious

Deleterious Flag
No

Metal Equivalent

Assumptions Disclosed
No

Review

Needs Review
No
Interp. Status
scored
Historical
No

Dates

Event date
2026-09-10T00:00:00.000Z

Reasoning: This intercept shows very broad, but low-grade copper mineralization, which is common in bulk tonnage deposits but may not be economically significant on its own.

Positive factors

  • Very long intercept length of 272.8m.

Negative factors

  • Weak copper grade for a bulk tonnage deposit.
  • True width not determined, potentially overstating length.

Evidence · table

“0.08”

Context: 272.8

Tags used in scoring

QA/QC Disclosedpositive

Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).

Why it applies: qaqc_disclosed is true

Cut-off Undisclosednegative

High-grade interval reported without stating the cut-off grade used for compositing.

Why it applies: no cutoff_grade was stated

Infill Drillingneutral

Confirmatory drilling to raise resource confidence, not new discovery.

Why it applies: drill_program_type is "mixed"

TS26-001Titac South · titaniumGrade: 4.53Grade Unit: %Intercept: 272.8 mView all details
Link to this fact

Identity

Hole ID
TS26-001
Project
Titac South
Commodity
titanium
Region
usa
Reported Region
usa
Ticker
GRBM

Geometry

Grade
4.53
Grade Unit
%
Intercept
272.8 m
From
26.2 m
To
299 m
Intercept Depth
26.2 m

Classification

Deposit Type
OUI
Program
mixed
Sample Type
drill
Group ID
TS26-001:26.2-299
Mining Method
open_pit

QA/QC

Laboratory
Activation Laboratories Ltd.
QA/QC Disclosed
Yes
QP Signed
Yes
QA/QC Methods
standards

Deleterious

Deleterious Flag
No

Metal Equivalent

Assumptions Disclosed
No

Review

Needs Review
No
Interp. Status
scored
Historical
No

Dates

Event date
2026-09-10T00:00:00.000Z

Reasoning: This intercept shows very broad, moderate-grade titanium dioxide mineralization, which is positive for a bulk tonnage deposit.

Positive factors

  • Very long intercept length of 272.8m.
  • Moderate titanium dioxide grade for a bulk tonnage deposit.

Negative factors

  • True width not determined, potentially overstating length.

Evidence · table

“4.53”

Context: 272.8

Tags used in scoring

QA/QC Disclosedpositive

Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).

Why it applies: qaqc_disclosed is true

Cut-off Undisclosednegative

High-grade interval reported without stating the cut-off grade used for compositing.

Why it applies: no cutoff_grade was stated

Infill Drillingneutral

Confirmatory drilling to raise resource confidence, not new discovery.

Why it applies: drill_program_type is "mixed"

TS26-001Titac South · vanadiumGrade: 1.34Grade Unit: %Intercept: 272.8 mView all details
Link to this fact

Identity

Hole ID
TS26-001
Project
Titac South
Commodity
vanadium
Region
usa
Reported Region
usa
Ticker
GRBM

Geometry

Grade
1.34
Grade Unit
%
Intercept
272.8 m
From
26.2 m
To
299 m
Intercept Depth
26.2 m

Classification

Deposit Type
OUI
Program
mixed
Sample Type
drill
Group ID
TS26-001:26.2-299
Mining Method
open_pit

QA/QC

Laboratory
Activation Laboratories Ltd.
QA/QC Disclosed
Yes
QP Signed
Yes
QA/QC Methods
standards

Deleterious

Deleterious Flag
No

Metal Equivalent

Assumptions Disclosed
No

Review

Needs Review
No
Interp. Status
scored
Historical
No

Dates

Event date
2026-09-10T00:00:00.000Z

Reasoning: This intercept shows very broad, good-grade vanadium mineralization, which could be a valuable byproduct.

Positive factors

  • Very long intercept length of 272.8m.
  • Good vanadium grade.

Negative factors

  • True width not determined, potentially overstating length.

Evidence · table

“1.34”

Context: 272.8

Tags used in scoring

QA/QC Disclosedpositive

Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).

Why it applies: qaqc_disclosed is true

Cut-off Undisclosednegative

High-grade interval reported without stating the cut-off grade used for compositing.

Why it applies: no cutoff_grade was stated

Infill Drillingneutral

Confirmatory drilling to raise resource confidence, not new discovery.

Why it applies: drill_program_type is "mixed"

TS26-001Titac South · pgeGrade: 14.1Grade Unit: ppbIntercept: 272.8 mView all details
Link to this fact

Identity

Hole ID
TS26-001
Project
Titac South
Commodity
pge
Region
usa
Reported Region
usa
Ticker
GRBM

Geometry

Grade
14.1
Grade Unit
ppb
Intercept
272.8 m
From
26.2 m
To
299 m
Intercept Depth
26.2 m

Classification

Deposit Type
OUI
Program
mixed
Sample Type
drill
Group ID
TS26-001:26.2-299
Mining Method
open_pit

QA/QC

Laboratory
Activation Laboratories Ltd.
QA/QC Disclosed
Yes
QP Signed
Yes
QA/QC Methods
standards

Deleterious

Deleterious Flag
No

Metal Equivalent

Assumptions Disclosed
No

Review

Needs Review
No
Interp. Status
scored
Historical
No

Dates

Event date
2026-09-10T00:00:00.000Z

Reasoning: While a very long intercept, the PGE grade is very low and unlikely to be economically significant.

Positive factors

  • Very long intercept length of 272.8m.

Negative factors

  • Very low PGE grade.
  • True width not determined, potentially overstating length.

Evidence · table

“14.1”

Context: 272.8

Tags used in scoring

QA/QC Disclosedpositive

Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).

Why it applies: qaqc_disclosed is true

Cut-off Undisclosednegative

High-grade interval reported without stating the cut-off grade used for compositing.

Why it applies: no cutoff_grade was stated

Infill Drillingneutral

Confirmatory drilling to raise resource confidence, not new discovery.

Why it applies: drill_program_type is "mixed"

TS26-001Titac South · copperGrade: 0.13Grade Unit: %Intercept: 34.8 mView all details
Link to this fact

Identity

Hole ID
TS26-001
Project
Titac South
Commodity
copper
Region
usa
Reported Region
usa
Ticker
GRBM

Geometry

Grade
0.13
Grade Unit
%
Intercept
34.8 m
From
26.2 m
To
61 m
Intercept Depth
26.2 m

Classification

Deposit Type
OUI
Program
mixed
Sample Type
drill
Group ID
TS26-001:26.2-61
Mining Method
open_pit

QA/QC

Laboratory
Activation Laboratories Ltd.
QA/QC Disclosed
Yes
QP Signed
Yes
QA/QC Methods
standards

Deleterious

Deleterious Flag
No

Metal Equivalent

Assumptions Disclosed
No

Review

Needs Review
No
Interp. Status
scored
Historical
No

Dates

Event date
2026-09-10T00:00:00.000Z

Reasoning: This sub-interval shows a moderate length with a weak copper grade, contributing to the overall mineralization but not highly significant on its own.

Positive factors

  • Good intercept length of 34.8m.

Negative factors

  • Weak copper grade.
  • True width not determined, potentially overstating length.

Evidence · table

“0.13”

Context: 34.8

Tags used in scoring

QA/QC Disclosedpositive

Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).

Why it applies: qaqc_disclosed is true

Cut-off Undisclosednegative

High-grade interval reported without stating the cut-off grade used for compositing.

Why it applies: no cutoff_grade was stated

Infill Drillingneutral

Confirmatory drilling to raise resource confidence, not new discovery.

Why it applies: drill_program_type is "mixed"

TS26-001Titac South · titaniumGrade: 5.89Grade Unit: %Intercept: 34.8 mView all details
Link to this fact

Identity

Hole ID
TS26-001
Project
Titac South
Commodity
titanium
Region
usa
Reported Region
usa
Ticker
GRBM

Geometry

Grade
5.89
Grade Unit
%
Intercept
34.8 m
From
26.2 m
To
61 m
Intercept Depth
26.2 m

Classification

Deposit Type
OUI
Program
mixed
Sample Type
drill
Group ID
TS26-001:26.2-61
Mining Method
open_pit

QA/QC

Laboratory
Activation Laboratories Ltd.
QA/QC Disclosed
Yes
QP Signed
Yes
QA/QC Methods
standards

Deleterious

Deleterious Flag
No

Metal Equivalent

Assumptions Disclosed
No

Review

Needs Review
No
Interp. Status
scored
Historical
No

Dates

Event date
2026-09-10T00:00:00.000Z

Reasoning: This sub-interval shows a moderate length with a moderate titanium dioxide grade, contributing positively to the overall mineralization.

Positive factors

  • Good intercept length of 34.8m.
  • Moderate titanium dioxide grade.

Negative factors

  • True width not determined, potentially overstating length.

Evidence · table

“5.89”

Context: 34.8

Tags used in scoring

QA/QC Disclosedpositive

Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).

Why it applies: qaqc_disclosed is true

Cut-off Undisclosednegative

High-grade interval reported without stating the cut-off grade used for compositing.

Why it applies: no cutoff_grade was stated

Infill Drillingneutral

Confirmatory drilling to raise resource confidence, not new discovery.

Why it applies: drill_program_type is "mixed"

TS26-001Titac South · vanadiumGrade: 0.06Grade Unit: %Intercept: 34.8 mView all details
Link to this fact

Identity

Hole ID
TS26-001
Project
Titac South
Commodity
vanadium
Region
usa
Reported Region
usa
Ticker
GRBM

Geometry

Grade
0.06
Grade Unit
%
Intercept
34.8 m
From
26.2 m
To
61 m
Intercept Depth
26.2 m

Classification

Deposit Type
OUI
Program
mixed
Sample Type
drill
Group ID
TS26-001:26.2-61
Mining Method
open_pit

QA/QC

Laboratory
Activation Laboratories Ltd.
QA/QC Disclosed
Yes
QP Signed
Yes
QA/QC Methods
standards

Deleterious

Deleterious Flag
No

Metal Equivalent

Assumptions Disclosed
No

Review

Needs Review
No
Interp. Status
scored
Historical
No

Dates

Event date
2026-09-10T00:00:00.000Z

Reasoning: This sub-interval shows a moderate length with a weak vanadium grade, which is less significant.

Positive factors

  • Good intercept length of 34.8m.

Negative factors

  • Weak vanadium grade.
  • True width not determined, potentially overstating length.

Evidence · table

“0.06”

Context: 34.8

Tags used in scoring

QA/QC Disclosedpositive

Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).

Why it applies: qaqc_disclosed is true

Cut-off Undisclosednegative

High-grade interval reported without stating the cut-off grade used for compositing.

Why it applies: no cutoff_grade was stated

Infill Drillingneutral

Confirmatory drilling to raise resource confidence, not new discovery.

Why it applies: drill_program_type is "mixed"

TS26-001Titac South · pgeGrade: 15Grade Unit: ppbIntercept: 34.8 mView all details
Link to this fact

Identity

Hole ID
TS26-001
Project
Titac South
Commodity
pge
Region
usa
Reported Region
usa
Ticker
GRBM

Geometry

Grade
15
Grade Unit
ppb
Intercept
34.8 m
From
26.2 m
To
61 m
Intercept Depth
26.2 m

Classification

Deposit Type
OUI
Program
mixed
Sample Type
drill
Group ID
TS26-001:26.2-61
Mining Method
open_pit

QA/QC

Laboratory
Activation Laboratories Ltd.
QA/QC Disclosed
Yes
QP Signed
Yes
QA/QC Methods
standards

Deleterious

Deleterious Flag
No

Metal Equivalent

Assumptions Disclosed
No

Review

Needs Review
No
Interp. Status
scored
Historical
No

Dates

Event date
2026-09-10T00:00:00.000Z

Reasoning: While a good length, the PGE grade is very low and unlikely to be economically significant.

Positive factors

  • Good intercept length of 34.8m.

Negative factors

  • Very low PGE grade.
  • True width not determined, potentially overstating length.

Evidence · table

“15.0”

Context: 34.8

Tags used in scoring

QA/QC Disclosedpositive

Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).

Why it applies: qaqc_disclosed is true

Cut-off Undisclosednegative

High-grade interval reported without stating the cut-off grade used for compositing.

Why it applies: no cutoff_grade was stated

Infill Drillingneutral

Confirmatory drilling to raise resource confidence, not new discovery.

Why it applies: drill_program_type is "mixed"

TS26-001Titac South · copperGrade: 0.14Grade Unit: %Intercept: 70 mView all details
Link to this fact

Identity

Hole ID
TS26-001
Project
Titac South
Commodity
copper
Region
usa
Reported Region
usa
Ticker
GRBM

Geometry

Grade
0.14
Grade Unit
%
Intercept
70 m
From
203 m
To
273 m
Intercept Depth
26.2 m

Classification

Deposit Type
OUI
Program
mixed
Sample Type
drill
Group ID
TS26-001:203-273
Mining Method
open_pit

QA/QC

Laboratory
Activation Laboratories Ltd.
QA/QC Disclosed
Yes
QP Signed
Yes
QA/QC Methods
standards

Deleterious

Deleterious Flag
No

Metal Equivalent

Assumptions Disclosed
No

Review

Needs Review
No
Interp. Status
scored
Historical
No

Dates

Event date
2026-09-10T00:00:00.000Z

Reasoning: This sub-interval shows a good length with a weak copper grade, contributing to the overall mineralization but not highly significant on its own.

Positive factors

  • Good intercept length of 70.0m.

Negative factors

  • Weak copper grade.
  • True width not determined, potentially overstating length.

Evidence · table

“0.14”

Context: 70.0

Tags used in scoring

QA/QC Disclosedpositive

Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).

Why it applies: qaqc_disclosed is true

Cut-off Undisclosednegative

High-grade interval reported without stating the cut-off grade used for compositing.

Why it applies: no cutoff_grade was stated

Infill Drillingneutral

Confirmatory drilling to raise resource confidence, not new discovery.

Why it applies: drill_program_type is "mixed"

TS26-001Titac South · titaniumGrade: 7.54Grade Unit: %Intercept: 70 mView all details
Link to this fact

Identity

Hole ID
TS26-001
Project
Titac South
Commodity
titanium
Region
usa
Reported Region
usa
Ticker
GRBM

Geometry

Grade
7.54
Grade Unit
%
Intercept
70 m
From
203 m
To
273 m
Intercept Depth
26.2 m

Classification

Deposit Type
OUI
Program
mixed
Sample Type
drill
Group ID
TS26-001:203-273
Mining Method
open_pit

QA/QC

Laboratory
Activation Laboratories Ltd.
QA/QC Disclosed
Yes
QP Signed
Yes
QA/QC Methods
standards

Deleterious

Deleterious Flag
No

Metal Equivalent

Assumptions Disclosed
No

Review

Needs Review
No
Interp. Status
scored
Historical
No

Dates

Event date
2026-09-10T00:00:00.000Z

Reasoning: This sub-interval shows a good length with a moderate titanium dioxide grade, contributing positively to the overall mineralization.

Positive factors

  • Good intercept length of 70.0m.
  • Moderate titanium dioxide grade.

Negative factors

  • True width not determined, potentially overstating length.

Evidence · table

“7.54”

Context: 70.0

Tags used in scoring

QA/QC Disclosedpositive

Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).

Why it applies: qaqc_disclosed is true

Cut-off Undisclosednegative

High-grade interval reported without stating the cut-off grade used for compositing.

Why it applies: no cutoff_grade was stated

Infill Drillingneutral

Confirmatory drilling to raise resource confidence, not new discovery.

Why it applies: drill_program_type is "mixed"

TS26-001Titac South · vanadiumGrade: 0.09Grade Unit: %Intercept: 70 mView all details
Link to this fact

Identity

Hole ID
TS26-001
Project
Titac South
Commodity
vanadium
Region
usa
Reported Region
usa
Ticker
GRBM

Geometry

Grade
0.09
Grade Unit
%
Intercept
70 m
From
203 m
To
273 m
Intercept Depth
26.2 m

Classification

Deposit Type
OUI
Program
mixed
Sample Type
drill
Group ID
TS26-001:203-273
Mining Method
open_pit

QA/QC

Laboratory
Activation Laboratories Ltd.
QA/QC Disclosed
Yes
QP Signed
Yes
QA/QC Methods
standards

Deleterious

Deleterious Flag
No

Metal Equivalent

Assumptions Disclosed
No

Review

Needs Review
No
Interp. Status
scored
Historical
No

Dates

Event date
2026-09-10T00:00:00.000Z

Reasoning: This sub-interval shows a good length with a weak vanadium grade, which is less significant.

Positive factors

  • Good intercept length of 70.0m.

Negative factors

  • Weak vanadium grade.
  • True width not determined, potentially overstating length.

Evidence · table

“0.09”

Context: 70.0

Tags used in scoring

QA/QC Disclosedpositive

Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).

Why it applies: qaqc_disclosed is true

Cut-off Undisclosednegative

High-grade interval reported without stating the cut-off grade used for compositing.

Why it applies: no cutoff_grade was stated

Infill Drillingneutral

Confirmatory drilling to raise resource confidence, not new discovery.

Why it applies: drill_program_type is "mixed"

TS26-001Titac South · pgeGrade: 18.7Grade Unit: ppbIntercept: 70 mView all details
Link to this fact

Identity

Hole ID
TS26-001
Project
Titac South
Commodity
pge
Region
usa
Reported Region
usa
Ticker
GRBM

Geometry

Grade
18.7
Grade Unit
ppb
Intercept
70 m
From
203 m
To
273 m
Intercept Depth
26.2 m

Classification

Deposit Type
OUI
Program
mixed
Sample Type
drill
Group ID
TS26-001:203-273
Mining Method
open_pit

QA/QC

Laboratory
Activation Laboratories Ltd.
QA/QC Disclosed
Yes
QP Signed
Yes
QA/QC Methods
standards

Deleterious

Deleterious Flag
No

Metal Equivalent

Assumptions Disclosed
No

Review

Needs Review
No
Interp. Status
scored
Historical
No

Dates

Event date
2026-09-10T00:00:00.000Z

Reasoning: While a good length, the PGE grade is very low and unlikely to be economically significant.

Positive factors

  • Good intercept length of 70.0m.

Negative factors

  • Very low PGE grade.
  • True width not determined, potentially overstating length.

Evidence · table

“18.7”

Context: 70.0

Tags used in scoring

QA/QC Disclosedpositive

Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).

Why it applies: qaqc_disclosed is true

Cut-off Undisclosednegative

High-grade interval reported without stating the cut-off grade used for compositing.

Why it applies: no cutoff_grade was stated

Infill Drillingneutral

Confirmatory drilling to raise resource confidence, not new discovery.

Why it applies: drill_program_type is "mixed"

TS26-001Titac South · copperGrade: 0.25Grade Unit: %Intercept: 8 mView all details
Link to this fact

Identity

Hole ID
TS26-001
Project
Titac South
Commodity
copper
Region
usa
Reported Region
usa
Ticker
GRBM

Geometry

Grade
0.25
Grade Unit
%
Intercept
8 m
From
203 m
To
211 m
Intercept Depth
26.2 m

Classification

Deposit Type
OUI
Program
mixed
Sample Type
drill
Group ID
TS26-001:203-211
Mining Method
open_pit

QA/QC

Laboratory
Activation Laboratories Ltd.
QA/QC Disclosed
Yes
QP Signed
Yes
QA/QC Methods
standards

Deleterious

Deleterious Flag
No

Metal Equivalent

Assumptions Disclosed
No

Review

Needs Review
No
Interp. Status
scored
Historical
No

Dates

Event date
2026-09-10T00:00:00.000Z

Reasoning: This narrow intercept shows a moderate copper grade, indicating a higher-grade zone within the broader mineralization.

Positive factors

  • Moderate copper grade.

Negative factors

  • Narrow intercept length.
  • True width not determined, potentially overstating length.

Evidence · table

“0.25”

Context: 8.0

Tags used in scoring

QA/QC Disclosedpositive

Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).

Why it applies: qaqc_disclosed is true

Cut-off Undisclosednegative

High-grade interval reported without stating the cut-off grade used for compositing.

Why it applies: no cutoff_grade was stated

Infill Drillingneutral

Confirmatory drilling to raise resource confidence, not new discovery.

Why it applies: drill_program_type is "mixed"

TS26-001Titac South · titaniumGrade: 11.23Grade Unit: %Intercept: 8 mView all details
Link to this fact

Identity

Hole ID
TS26-001
Project
Titac South
Commodity
titanium
Region
usa
Reported Region
usa
Ticker
GRBM

Geometry

Grade
11.23
Grade Unit
%
Intercept
8 m
From
203 m
To
211 m
Intercept Depth
26.2 m

Classification

Deposit Type
OUI
Program
mixed
Sample Type
drill
Group ID
TS26-001:203-211
Mining Method
open_pit

QA/QC

Laboratory
Activation Laboratories Ltd.
QA/QC Disclosed
Yes
QP Signed
Yes
QA/QC Methods
standards

Deleterious

Deleterious Flag
No

Metal Equivalent

Assumptions Disclosed
No

Review

Needs Review
No
Interp. Status
scored
Historical
No

Dates

Event date
2026-09-10T00:00:00.000Z

Reasoning: This narrow intercept shows a strong titanium dioxide grade, indicating a higher-grade zone within the broader mineralization.

Positive factors

  • Strong titanium dioxide grade.

Negative factors

  • Narrow intercept length.
  • True width not determined, potentially overstating length.

Evidence · table

“11.23”

Context: 8.0

Tags used in scoring

QA/QC Disclosedpositive

Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).

Why it applies: qaqc_disclosed is true

Cut-off Undisclosednegative

High-grade interval reported without stating the cut-off grade used for compositing.

Why it applies: no cutoff_grade was stated

Infill Drillingneutral

Confirmatory drilling to raise resource confidence, not new discovery.

Why it applies: drill_program_type is "mixed"

TS26-001Titac South · vanadiumGrade: 0.11Grade Unit: %Intercept: 8 mView all details
Link to this fact

Identity

Hole ID
TS26-001
Project
Titac South
Commodity
vanadium
Region
usa
Reported Region
usa
Ticker
GRBM

Geometry

Grade
0.11
Grade Unit
%
Intercept
8 m
From
203 m
To
211 m
Intercept Depth
26.2 m

Classification

Deposit Type
OUI
Program
mixed
Sample Type
drill
Group ID
TS26-001:203-211
Mining Method
open_pit

QA/QC

Laboratory
Activation Laboratories Ltd.
QA/QC Disclosed
Yes
QP Signed
Yes
QA/QC Methods
standards

Deleterious

Deleterious Flag
No

Metal Equivalent

Assumptions Disclosed
No

Review

Needs Review
No
Interp. Status
scored
Historical
No

Dates

Event date
2026-09-10T00:00:00.000Z

Reasoning: This narrow intercept shows a moderate vanadium grade, which is a positive byproduct.

Positive factors

  • Moderate vanadium grade.

Negative factors

  • Narrow intercept length.
  • True width not determined, potentially overstating length.

Evidence · table

“0.11”

Context: 8.0

Tags used in scoring

QA/QC Disclosedpositive

Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).

Why it applies: qaqc_disclosed is true

Cut-off Undisclosednegative

High-grade interval reported without stating the cut-off grade used for compositing.

Why it applies: no cutoff_grade was stated

Infill Drillingneutral

Confirmatory drilling to raise resource confidence, not new discovery.

Why it applies: drill_program_type is "mixed"

TS26-001Titac South · pgeGrade: 20.8Grade Unit: ppbIntercept: 8 mView all details
Link to this fact

Identity

Hole ID
TS26-001
Project
Titac South
Commodity
pge
Region
usa
Reported Region
usa
Ticker
GRBM

Geometry

Grade
20.8
Grade Unit
ppb
Intercept
8 m
From
203 m
To
211 m
Intercept Depth
26.2 m

Classification

Deposit Type
OUI
Program
mixed
Sample Type
drill
Group ID
TS26-001:203-211
Mining Method
open_pit

QA/QC

Laboratory
Activation Laboratories Ltd.
QA/QC Disclosed
Yes
QP Signed
Yes
QA/QC Methods
standards

Deleterious

Deleterious Flag
No

Metal Equivalent

Assumptions Disclosed
No

Review

Needs Review
No
Interp. Status
scored
Historical
No

Dates

Event date
2026-09-10T00:00:00.000Z

Reasoning: The PGE grade is very low and unlikely to be economically significant, even within this narrow interval.

Negative factors

  • Very low PGE grade.
  • Narrow intercept length.
  • True width not determined, potentially overstating length.

Evidence · table

“20.8”

Context: 8.0

Tags used in scoring

QA/QC Disclosedpositive

Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).

Why it applies: qaqc_disclosed is true

Cut-off Undisclosednegative

High-grade interval reported without stating the cut-off grade used for compositing.

Why it applies: no cutoff_grade was stated

Infill Drillingneutral

Confirmatory drilling to raise resource confidence, not new discovery.

Why it applies: drill_program_type is "mixed"

TS26-001Titac South · copperGrade: 0.19Grade Unit: %Intercept: 20 mView all details
Link to this fact

Identity

Hole ID
TS26-001
Project
Titac South
Commodity
copper
Region
usa
Reported Region
usa
Ticker
GRBM

Geometry

Grade
0.19
Grade Unit
%
Intercept
20 m
From
237 m
To
257 m
Intercept Depth
26.2 m

Classification

Deposit Type
OUI
Program
mixed
Sample Type
drill
Group ID
TS26-001:237-257
Mining Method
open_pit

QA/QC

Laboratory
Activation Laboratories Ltd.
QA/QC Disclosed
Yes
QP Signed
Yes
QA/QC Methods
standards

Deleterious

Deleterious Flag
No

Metal Equivalent

Assumptions Disclosed
No

Review

Needs Review
No
Interp. Status
scored
Historical
No

Dates

Event date
2026-09-10T00:00:00.000Z

Reasoning: This intercept shows a moderate length and grade for copper, contributing to the overall mineralization.

Positive factors

  • Moderate intercept length of 20.0m.
  • Moderate copper grade.

Negative factors

  • True width not determined, potentially overstating length.

Evidence · table

“0.19”

Context: 20.0

Tags used in scoring

QA/QC Disclosedpositive

Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).

Why it applies: qaqc_disclosed is true

Cut-off Undisclosednegative

High-grade interval reported without stating the cut-off grade used for compositing.

Why it applies: no cutoff_grade was stated

Infill Drillingneutral

Confirmatory drilling to raise resource confidence, not new discovery.

Why it applies: drill_program_type is "mixed"

TS26-001Titac South · titaniumGrade: 6.17Grade Unit: %Intercept: 20 mView all details
Link to this fact

Identity

Hole ID
TS26-001
Project
Titac South
Commodity
titanium
Region
usa
Reported Region
usa
Ticker
GRBM

Geometry

Grade
6.17
Grade Unit
%
Intercept
20 m
From
237 m
To
257 m
Intercept Depth
26.2 m

Classification

Deposit Type
OUI
Program
mixed
Sample Type
drill
Group ID
TS26-001:237-257
Mining Method
open_pit

QA/QC

Laboratory
Activation Laboratories Ltd.
QA/QC Disclosed
Yes
QP Signed
Yes
QA/QC Methods
standards

Deleterious

Deleterious Flag
No

Metal Equivalent

Assumptions Disclosed
No

Review

Needs Review
No
Interp. Status
scored
Historical
No

Dates

Event date
2026-09-10T00:00:00.000Z

Reasoning: This intercept shows a moderate length and grade for titanium dioxide, contributing positively to the overall mineralization.

Positive factors

  • Moderate intercept length of 20.0m.
  • Moderate titanium dioxide grade.

Negative factors

  • True width not determined, potentially overstating length.

Evidence · table

“6.17”

Context: 20.0

Tags used in scoring

QA/QC Disclosedpositive

Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).

Why it applies: qaqc_disclosed is true

Cut-off Undisclosednegative

High-grade interval reported without stating the cut-off grade used for compositing.

Why it applies: no cutoff_grade was stated

Infill Drillingneutral

Confirmatory drilling to raise resource confidence, not new discovery.

Why it applies: drill_program_type is "mixed"

TS26-001Titac South · vanadiumGrade: 0.08Grade Unit: %Intercept: 20 mView all details
Link to this fact

Identity

Hole ID
TS26-001
Project
Titac South
Commodity
vanadium
Region
usa
Reported Region
usa
Ticker
GRBM

Geometry

Grade
0.08
Grade Unit
%
Intercept
20 m
From
237 m
To
257 m
Intercept Depth
26.2 m

Classification

Deposit Type
OUI
Program
mixed
Sample Type
drill
Group ID
TS26-001:237-257
Mining Method
open_pit

QA/QC

Laboratory
Activation Laboratories Ltd.
QA/QC Disclosed
Yes
QP Signed
Yes
QA/QC Methods
standards

Deleterious

Deleterious Flag
No

Metal Equivalent

Assumptions Disclosed
No

Review

Needs Review
No
Interp. Status
scored
Historical
No

Dates

Event date
2026-09-10T00:00:00.000Z

Reasoning: This intercept shows a moderate length with a weak vanadium grade, which is less significant.

Positive factors

  • Moderate intercept length of 20.0m.

Negative factors

  • Weak vanadium grade.
  • True width not determined, potentially overstating length.

Evidence · table

“0.08”

Context: 20.0

Tags used in scoring

QA/QC Disclosedpositive

Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).

Why it applies: qaqc_disclosed is true

Cut-off Undisclosednegative

High-grade interval reported without stating the cut-off grade used for compositing.

Why it applies: no cutoff_grade was stated

Infill Drillingneutral

Confirmatory drilling to raise resource confidence, not new discovery.

Why it applies: drill_program_type is "mixed"

TS26-001Titac South · pgeGrade: 21.5Grade Unit: ppbIntercept: 20 mView all details
Link to this fact

Identity

Hole ID
TS26-001
Project
Titac South
Commodity
pge
Region
usa
Reported Region
usa
Ticker
GRBM

Geometry

Grade
21.5
Grade Unit
ppb
Intercept
20 m
From
237 m
To
257 m
Intercept Depth
26.2 m

Classification

Deposit Type
OUI
Program
mixed
Sample Type
drill
Group ID
TS26-001:237-257
Mining Method
open_pit

QA/QC

Laboratory
Activation Laboratories Ltd.
QA/QC Disclosed
Yes
QP Signed
Yes
QA/QC Methods
standards

Deleterious

Deleterious Flag
No

Metal Equivalent

Assumptions Disclosed
No

Review

Needs Review
No
Interp. Status
scored
Historical
No

Dates

Event date
2026-09-10T00:00:00.000Z

Reasoning: The PGE grade is very low and unlikely to be economically significant, even within this interval.

Negative factors

  • Very low PGE grade.
  • True width not determined, potentially overstating length.

Evidence · table

“21.5”

Context: 20.0

Tags used in scoring

QA/QC Disclosedpositive

Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).

Why it applies: qaqc_disclosed is true

Cut-off Undisclosednegative

High-grade interval reported without stating the cut-off grade used for compositing.

Why it applies: no cutoff_grade was stated

Infill Drillingneutral

Confirmatory drilling to raise resource confidence, not new discovery.

Why it applies: drill_program_type is "mixed"

TS26-004aTitac South · copperGrade: 0.23Grade Unit: %Intercept: 267 mView all details
Link to this fact

Identity

Hole ID
TS26-004a
Project
Titac South
Commodity
copper
Region
usa
Reported Region
usa
Ticker
GRBM

Geometry

Grade
0.23
Grade Unit
%
Intercept
267 m
From
35 m
To
302 m
Intercept Depth
35 m

Classification

Deposit Type
OUI
Program
mixed
Sample Type
drill
Group ID
TS26-004a:35-302
Mining Method
open_pit

QA/QC

Laboratory
Activation Laboratories Ltd.
QA/QC Disclosed
Yes
QP Signed
Yes
QA/QC Methods
standards

Deleterious

Deleterious Flag
No

Metal Equivalent

Assumptions Disclosed
No

Review

Needs Review
No
Interp. Status
scored
Historical
No

Dates

Event date
2026-09-10T00:00:00.000Z

Reasoning: This is a very long intercept with a moderate copper grade, indicating significant bulk tonnage potential.

Positive factors

  • Exceptional intercept length of 267.0m.
  • Moderate copper grade for a bulk tonnage deposit.

Negative factors

  • True width not determined, potentially overstating length.

Evidence · table

“0.23”

Context: 267.0

Tags used in scoring

QA/QC Disclosedpositive

Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).

Why it applies: qaqc_disclosed is true

Cut-off Undisclosednegative

High-grade interval reported without stating the cut-off grade used for compositing.

Why it applies: no cutoff_grade was stated

Infill Drillingneutral

Confirmatory drilling to raise resource confidence, not new discovery.

Why it applies: drill_program_type is "mixed"

TS26-004aTitac South · titaniumGrade: 10.28Grade Unit: %Intercept: 267 mView all details
Link to this fact

Identity

Hole ID
TS26-004a
Project
Titac South
Commodity
titanium
Region
usa
Reported Region
usa
Ticker
GRBM

Geometry

Grade
10.28
Grade Unit
%
Intercept
267 m
From
35 m
To
302 m
Intercept Depth
35 m

Classification

Deposit Type
OUI
Program
mixed
Sample Type
drill
Group ID
TS26-004a:35-302
Mining Method
open_pit

QA/QC

Laboratory
Activation Laboratories Ltd.
QA/QC Disclosed
Yes
QP Signed
Yes
QA/QC Methods
standards

Deleterious

Deleterious Flag
No

Metal Equivalent

Assumptions Disclosed
No

Review

Needs Review
No
Interp. Status
scored
Historical
No

Dates

Event date
2026-09-10T00:00:00.000Z

Reasoning: This is a very long intercept with a strong titanium dioxide grade, indicating significant bulk tonnage potential for the primary commodity.

Positive factors

  • Exceptional intercept length of 267.0m.
  • Strong titanium dioxide grade.

Negative factors

  • True width not determined, potentially overstating length.

Evidence · table

“10.28”

Context: 267.0

Tags used in scoring

QA/QC Disclosedpositive

Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).

Why it applies: qaqc_disclosed is true

Cut-off Undisclosednegative

High-grade interval reported without stating the cut-off grade used for compositing.

Why it applies: no cutoff_grade was stated

Infill Drillingneutral

Confirmatory drilling to raise resource confidence, not new discovery.

Why it applies: drill_program_type is "mixed"

TS26-004aTitac South · vanadiumGrade: 0.1Grade Unit: %Intercept: 267 mView all details
Link to this fact

Identity

Hole ID
TS26-004a
Project
Titac South
Commodity
vanadium
Region
usa
Reported Region
usa
Ticker
GRBM

Geometry

Grade
0.1
Grade Unit
%
Intercept
267 m
From
35 m
To
302 m
Intercept Depth
35 m

Classification

Deposit Type
OUI
Program
mixed
Sample Type
drill
Group ID
TS26-004a:35-302
Mining Method
open_pit

QA/QC

Laboratory
Activation Laboratories Ltd.
QA/QC Disclosed
Yes
QP Signed
Yes
QA/QC Methods
standards

Deleterious

Deleterious Flag
No

Metal Equivalent

Assumptions Disclosed
No

Review

Needs Review
No
Interp. Status
scored
Historical
No

Dates

Event date
2026-09-10T00:00:00.000Z

Reasoning: This is a very long intercept with a moderate vanadium grade, indicating significant byproduct potential.

Positive factors

  • Exceptional intercept length of 267.0m.
  • Moderate vanadium grade.

Negative factors

  • True width not determined, potentially overstating length.

Evidence · table

“0.10”

Context: 267.0

Tags used in scoring

QA/QC Disclosedpositive

Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).

Why it applies: qaqc_disclosed is true

Cut-off Undisclosednegative

High-grade interval reported without stating the cut-off grade used for compositing.

Why it applies: no cutoff_grade was stated

Infill Drillingneutral

Confirmatory drilling to raise resource confidence, not new discovery.

Why it applies: drill_program_type is "mixed"

TS26-004aTitac South · pgeGrade: 22.1Grade Unit: ppbIntercept: 267 mView all details
Link to this fact

Identity

Hole ID
TS26-004a
Project
Titac South
Commodity
pge
Region
usa
Reported Region
usa
Ticker
GRBM

Geometry

Grade
22.1
Grade Unit
ppb
Intercept
267 m
From
35 m
To
302 m
Intercept Depth
35 m

Classification

Deposit Type
OUI
Program
mixed
Sample Type
drill
Group ID
TS26-004a:35-302
Mining Method
open_pit

QA/QC

Laboratory
Activation Laboratories Ltd.
QA/QC Disclosed
Yes
QP Signed
Yes
QA/QC Methods
standards

Deleterious

Deleterious Flag
No

Metal Equivalent

Assumptions Disclosed
No

Review

Needs Review
No
Interp. Status
scored
Historical
No

Dates

Event date
2026-09-10T00:00:00.000Z

Reasoning: While a very long intercept, the PGE grade is very low and unlikely to be economically significant.

Positive factors

  • Exceptional intercept length of 267.0m.

Negative factors

  • Very low PGE grade.
  • True width not determined, potentially overstating length.

Evidence · table

“22.1”

Context: 267.0

Tags used in scoring

QA/QC Disclosedpositive

Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).

Why it applies: qaqc_disclosed is true

Cut-off Undisclosednegative

High-grade interval reported without stating the cut-off grade used for compositing.

Why it applies: no cutoff_grade was stated

Infill Drillingneutral

Confirmatory drilling to raise resource confidence, not new discovery.

Why it applies: drill_program_type is "mixed"

TS26-004aTitac South · copperGrade: 0.32Grade Unit: %Intercept: 24 mView all details
Link to this fact

Identity

Hole ID
TS26-004a
Project
Titac South
Commodity
copper
Region
usa
Reported Region
usa
Ticker
GRBM

Geometry

Grade
0.32
Grade Unit
%
Intercept
24 m
From
35 m
To
59 m
Intercept Depth
35 m

Classification

Deposit Type
OUI
Program
mixed
Sample Type
drill
Group ID
TS26-004a:35-59
Mining Method
open_pit

QA/QC

Laboratory
Activation Laboratories Ltd.
QA/QC Disclosed
Yes
QP Signed
Yes
QA/QC Methods
standards

Deleterious

Deleterious Flag
No

Metal Equivalent

Assumptions Disclosed
No

Review

Needs Review
No
Interp. Status
scored
Historical
No

Dates

Event date
2026-09-10T00:00:00.000Z

Reasoning: This intercept shows a good length with a moderate copper grade, indicating a higher-grade zone near surface.

Positive factors

  • Good intercept length of 24.0m.
  • Moderate copper grade.

Negative factors

  • True width not determined, potentially overstating length.

Evidence · table

“0.32”

Context: 24.0

Tags used in scoring

QA/QC Disclosedpositive

Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).

Why it applies: qaqc_disclosed is true

Cut-off Undisclosednegative

High-grade interval reported without stating the cut-off grade used for compositing.

Why it applies: no cutoff_grade was stated

Infill Drillingneutral

Confirmatory drilling to raise resource confidence, not new discovery.

Why it applies: drill_program_type is "mixed"

TS26-004aTitac South · titaniumGrade: 10.92Grade Unit: %Intercept: 24 mView all details
Link to this fact

Identity

Hole ID
TS26-004a
Project
Titac South
Commodity
titanium
Region
usa
Reported Region
usa
Ticker
GRBM

Geometry

Grade
10.92
Grade Unit
%
Intercept
24 m
From
35 m
To
59 m
Intercept Depth
35 m

Classification

Deposit Type
OUI
Program
mixed
Sample Type
drill
Group ID
TS26-004a:35-59
Mining Method
open_pit

QA/QC

Laboratory
Activation Laboratories Ltd.
QA/QC Disclosed
Yes
QP Signed
Yes
QA/QC Methods
standards

Deleterious

Deleterious Flag
No

Metal Equivalent

Assumptions Disclosed
No

Review

Needs Review
No
Interp. Status
scored
Historical
No

Dates

Event date
2026-09-10T00:00:00.000Z

Reasoning: This intercept shows a good length with a strong titanium dioxide grade, indicating a higher-grade zone near surface for the primary commodity.

Positive factors

  • Good intercept length of 24.0m.
  • Strong titanium dioxide grade.

Negative factors

  • True width not determined, potentially overstating length.

Evidence · table

“10.92”

Context: 24.0

Tags used in scoring

QA/QC Disclosedpositive

Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).

Why it applies: qaqc_disclosed is true

Cut-off Undisclosednegative

High-grade interval reported without stating the cut-off grade used for compositing.

Why it applies: no cutoff_grade was stated

Infill Drillingneutral

Confirmatory drilling to raise resource confidence, not new discovery.

Why it applies: drill_program_type is "mixed"

TS26-004aTitac South · vanadiumGrade: 0.11Grade Unit: %Intercept: 24 mView all details
Link to this fact

Identity

Hole ID
TS26-004a
Project
Titac South
Commodity
vanadium
Region
usa
Reported Region
usa
Ticker
GRBM

Geometry

Grade
0.11
Grade Unit
%
Intercept
24 m
From
35 m
To
59 m
Intercept Depth
35 m

Classification

Deposit Type
OUI
Program
mixed
Sample Type
drill
Group ID
TS26-004a:35-59
Mining Method
open_pit

QA/QC

Laboratory
Activation Laboratories Ltd.
QA/QC Disclosed
Yes
QP Signed
Yes
QA/QC Methods
standards

Deleterious

Deleterious Flag
No

Metal Equivalent

Assumptions Disclosed
No

Review

Needs Review
No
Interp. Status
scored
Historical
No

Dates

Event date
2026-09-10T00:00:00.000Z

Reasoning: This intercept shows a good length with a moderate vanadium grade, indicating a positive byproduct near surface.

Positive factors

  • Good intercept length of 24.0m.
  • Moderate vanadium grade.

Negative factors

  • True width not determined, potentially overstating length.

Evidence · table

“0.11”

Context: 24.0

Tags used in scoring

QA/QC Disclosedpositive

Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).

Why it applies: qaqc_disclosed is true

Cut-off Undisclosednegative

High-grade interval reported without stating the cut-off grade used for compositing.

Why it applies: no cutoff_grade was stated

Infill Drillingneutral

Confirmatory drilling to raise resource confidence, not new discovery.

Why it applies: drill_program_type is "mixed"

TS26-004aTitac South · pgeGrade: 107Grade Unit: ppbIntercept: 24 mView all details
Link to this fact

Identity

Hole ID
TS26-004a
Project
Titac South
Commodity
pge
Region
usa
Reported Region
usa
Ticker
GRBM

Geometry

Grade
107
Grade Unit
ppb
Intercept
24 m
From
35 m
To
59 m
Intercept Depth
35 m

Classification

Deposit Type
OUI
Program
mixed
Sample Type
drill
Group ID
TS26-004a:35-59
Mining Method
open_pit

QA/QC

Laboratory
Activation Laboratories Ltd.
QA/QC Disclosed
Yes
QP Signed
Yes
QA/QC Methods
standards

Deleterious

Deleterious Flag
No

Metal Equivalent

Assumptions Disclosed
No

Review

Needs Review
No
Interp. Status
scored
Historical
No

Dates

Event date
2026-09-10T00:00:00.000Z

Reasoning: While a good length, the PGE grade is low and unlikely to be economically significant.

Positive factors

  • Good intercept length of 24.0m.

Negative factors

  • Low PGE grade.
  • True width not determined, potentially overstating length.

Evidence · table

“107.0”

Context: 24.0

Tags used in scoring

QA/QC Disclosedpositive

Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).

Why it applies: qaqc_disclosed is true

Cut-off Undisclosednegative

High-grade interval reported without stating the cut-off grade used for compositing.

Why it applies: no cutoff_grade was stated

Infill Drillingneutral

Confirmatory drilling to raise resource confidence, not new discovery.

Why it applies: drill_program_type is "mixed"

TS26-004aTitac South · vanadiumGrade: 0.09Grade Unit: %Intercept: 195 mView all details
Link to this fact

Identity

Hole ID
TS26-004a
Project
Titac South
Commodity
vanadium
Region
usa
Reported Region
usa
Ticker
GRBM

Geometry

Grade
0.09
Grade Unit
%
Intercept
195 m
From
65 m
To
261 m
Intercept Depth
35 m

Classification

Deposit Type
OUI
Program
mixed
Sample Type
drill
Group ID
TS26-004a:65-261
Mining Method
open_pit

QA/QC

Laboratory
Activation Laboratories Ltd.
QA/QC Disclosed
Yes
QP Signed
Yes
QA/QC Methods
standards

Deleterious

Deleterious Flag
No

Metal Equivalent

Assumptions Disclosed
No

Review

Needs Review
No
Interp. Status
scored
Historical
No

Dates

Event date
2026-09-10T00:00:00.000Z

Reasoning: This is a very long intercept with a moderate vanadium grade, indicating significant byproduct potential.

Positive factors

  • Exceptional intercept length of 195.0m.
  • Moderate vanadium grade.

Negative factors

  • True width not determined, potentially overstating length.

Evidence · table

“0.09”

Context: 195.0

Tags used in scoring

QA/QC Disclosedpositive

Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).

Why it applies: qaqc_disclosed is true

Cut-off Undisclosednegative

High-grade interval reported without stating the cut-off grade used for compositing.

Why it applies: no cutoff_grade was stated

Infill Drillingneutral

Confirmatory drilling to raise resource confidence, not new discovery.

Why it applies: drill_program_type is "mixed"

TS26-004aTitac South · pgeGrade: 13.9Grade Unit: ppbIntercept: 195 mView all details
Link to this fact

Identity

Hole ID
TS26-004a
Project
Titac South
Commodity
pge
Region
usa
Reported Region
usa
Ticker
GRBM

Geometry

Grade
13.9
Grade Unit
ppb
Intercept
195 m
From
65 m
To
261 m
Intercept Depth
35 m

Classification

Deposit Type
OUI
Program
mixed
Sample Type
drill
Group ID
TS26-004a:65-261
Mining Method
open_pit

QA/QC

Laboratory
Activation Laboratories Ltd.
QA/QC Disclosed
Yes
QP Signed
Yes
QA/QC Methods
standards

Deleterious

Deleterious Flag
No

Metal Equivalent

Assumptions Disclosed
No

Review

Needs Review
No
Interp. Status
scored
Historical
No

Dates

Event date
2026-09-10T00:00:00.000Z

Reasoning: While a very long intercept, the PGE grade is very low and unlikely to be economically significant.

Positive factors

  • Exceptional intercept length of 195.0m.

Negative factors

  • Very low PGE grade.
  • True width not determined, potentially overstating length.

Evidence · table

“13.9”

Context: 195.0

Tags used in scoring

QA/QC Disclosedpositive

Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).

Why it applies: qaqc_disclosed is true

Cut-off Undisclosednegative

High-grade interval reported without stating the cut-off grade used for compositing.

Why it applies: no cutoff_grade was stated

Infill Drillingneutral

Confirmatory drilling to raise resource confidence, not new discovery.

Why it applies: drill_program_type is "mixed"

TS26-004aTitac South · vanadiumGrade: 0.09Grade Unit: %Intercept: 62 mView all details
Link to this fact

Identity

Hole ID
TS26-004a
Project
Titac South
Commodity
vanadium
Region
usa
Reported Region
usa
Ticker
GRBM

Geometry

Grade
0.09
Grade Unit
%
Intercept
62 m
From
127 m
To
189 m
Intercept Depth
35 m

Classification

Deposit Type
OUI
Program
mixed
Sample Type
drill
Group ID
TS26-004a:127-189
Mining Method
open_pit

QA/QC

Laboratory
Activation Laboratories Ltd.
QA/QC Disclosed
Yes
QP Signed
Yes
QA/QC Methods
standards

Deleterious

Deleterious Flag
No

Metal Equivalent

Assumptions Disclosed
No

Review

Needs Review
No
Interp. Status
scored
Historical
No

Dates

Event date
2026-09-10T00:00:00.000Z

Reasoning: This is a good length intercept with a moderate vanadium grade, indicating a positive byproduct.

Positive factors

  • Good intercept length of 62.0m.
  • Moderate vanadium grade.

Negative factors

  • True width not determined, potentially overstating length.

Evidence · table

“0.09”

Context: 62.0

Tags used in scoring

QA/QC Disclosedpositive

Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).

Why it applies: qaqc_disclosed is true

Cut-off Undisclosednegative

High-grade interval reported without stating the cut-off grade used for compositing.

Why it applies: no cutoff_grade was stated

Infill Drillingneutral

Confirmatory drilling to raise resource confidence, not new discovery.

Why it applies: drill_program_type is "mixed"

TS26-004aTitac South · pgeGrade: 13.9Grade Unit: ppbIntercept: 62 mView all details
Link to this fact

Identity

Hole ID
TS26-004a
Project
Titac South
Commodity
pge
Region
usa
Reported Region
usa
Ticker
GRBM

Geometry

Grade
13.9
Grade Unit
ppb
Intercept
62 m
From
127 m
To
189 m
Intercept Depth
35 m

Classification

Deposit Type
OUI
Program
mixed
Sample Type
drill
Group ID
TS26-004a:127-189
Mining Method
open_pit

QA/QC

Laboratory
Activation Laboratories Ltd.
QA/QC Disclosed
Yes
QP Signed
Yes
QA/QC Methods
standards

Deleterious

Deleterious Flag
No

Metal Equivalent

Assumptions Disclosed
No

Review

Needs Review
No
Interp. Status
scored
Historical
No

Dates

Event date
2026-09-10T00:00:00.000Z

Reasoning: While a good length, the PGE grade is very low and unlikely to be economically significant.

Positive factors

  • Good intercept length of 62.0m.

Negative factors

  • Very low PGE grade.
  • True width not determined, potentially overstating length.

Evidence · table

“13.9”

Context: 62.0

Tags used in scoring

QA/QC Disclosedpositive

Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).

Why it applies: qaqc_disclosed is true

Cut-off Undisclosednegative

High-grade interval reported without stating the cut-off grade used for compositing.

Why it applies: no cutoff_grade was stated

Infill Drillingneutral

Confirmatory drilling to raise resource confidence, not new discovery.

Why it applies: drill_program_type is "mixed"

TS26-004aTitac South · copperGrade: 0.18Grade Unit: %Intercept: 20 mView all details
Link to this fact

Identity

Hole ID
TS26-004a
Project
Titac South
Commodity
copper
Region
usa
Reported Region
usa
Ticker
GRBM

Geometry

Grade
0.18
Grade Unit
%
Intercept
20 m
From
271 m
To
291 m
Intercept Depth
35 m

Classification

Deposit Type
OUI
Program
mixed
Sample Type
drill
Group ID
TS26-004a:271-291
Mining Method
open_pit

QA/QC

Laboratory
Activation Laboratories Ltd.
QA/QC Disclosed
Yes
QP Signed
Yes
QA/QC Methods
standards

Deleterious

Deleterious Flag
No

Metal Equivalent

Assumptions Disclosed
No

Review

Needs Review
No
Interp. Status
scored
Historical
No

Dates

Event date
2026-09-10T00:00:00.000Z

Reasoning: This intercept shows a moderate length and grade for copper, contributing to the overall mineralization.

Positive factors

  • Moderate intercept length of 20.0m.
  • Moderate copper grade.

Negative factors

  • True width not determined, potentially overstating length.

Evidence · table

“0.18”

Context: 20.0

Tags used in scoring

QA/QC Disclosedpositive

Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).

Why it applies: qaqc_disclosed is true

Cut-off Undisclosednegative

High-grade interval reported without stating the cut-off grade used for compositing.

Why it applies: no cutoff_grade was stated

Infill Drillingneutral

Confirmatory drilling to raise resource confidence, not new discovery.

Why it applies: drill_program_type is "mixed"

TS26-004aTitac South · titaniumGrade: 12.55Grade Unit: %Intercept: 20 mView all details
Link to this fact

Identity

Hole ID
TS26-004a
Project
Titac South
Commodity
titanium
Region
usa
Reported Region
usa
Ticker
GRBM

Geometry

Grade
12.55
Grade Unit
%
Intercept
20 m
From
271 m
To
291 m
Intercept Depth
35 m

Classification

Deposit Type
OUI
Program
mixed
Sample Type
drill
Group ID
TS26-004a:271-291
Mining Method
open_pit

QA/QC

Laboratory
Activation Laboratories Ltd.
QA/QC Disclosed
Yes
QP Signed
Yes
QA/QC Methods
standards

Deleterious

Deleterious Flag
No

Metal Equivalent

Assumptions Disclosed
No

Review

Needs Review
No
Interp. Status
scored
Historical
No

Dates

Event date
2026-09-10T00:00:00.000Z

Reasoning: This intercept shows a moderate length and strong grade for titanium dioxide, contributing positively to the overall mineralization.

Positive factors

  • Moderate intercept length of 20.0m.
  • Strong titanium dioxide grade.

Negative factors

  • True width not determined, potentially overstating length.

Evidence · table

“12.55”

Context: 20.0

Tags used in scoring

QA/QC Disclosedpositive

Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).

Why it applies: qaqc_disclosed is true

Cut-off Undisclosednegative

High-grade interval reported without stating the cut-off grade used for compositing.

Why it applies: no cutoff_grade was stated

Infill Drillingneutral

Confirmatory drilling to raise resource confidence, not new discovery.

Why it applies: drill_program_type is "mixed"

TS26-004aTitac South · vanadiumGrade: 0.14Grade Unit: %Intercept: 20 mView all details
Link to this fact

Identity

Hole ID
TS26-004a
Project
Titac South
Commodity
vanadium
Region
usa
Reported Region
usa
Ticker
GRBM

Geometry

Grade
0.14
Grade Unit
%
Intercept
20 m
From
271 m
To
291 m
Intercept Depth
35 m

Classification

Deposit Type
OUI
Program
mixed
Sample Type
drill
Group ID
TS26-004a:271-291
Mining Method
open_pit

QA/QC

Laboratory
Activation Laboratories Ltd.
QA/QC Disclosed
Yes
QP Signed
Yes
QA/QC Methods
standards

Deleterious

Deleterious Flag
No

Metal Equivalent

Assumptions Disclosed
No

Review

Needs Review
No
Interp. Status
scored
Historical
No

Dates

Event date
2026-09-10T00:00:00.000Z

Reasoning: This intercept shows a moderate length and good grade for vanadium, indicating a positive byproduct.

Positive factors

  • Moderate intercept length of 20.0m.
  • Good vanadium grade.

Negative factors

  • True width not determined, potentially overstating length.

Evidence · table

“0.14”

Context: 20.0

Tags used in scoring

QA/QC Disclosedpositive

Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).

Why it applies: qaqc_disclosed is true

Cut-off Undisclosednegative

High-grade interval reported without stating the cut-off grade used for compositing.

Why it applies: no cutoff_grade was stated

Infill Drillingneutral

Confirmatory drilling to raise resource confidence, not new discovery.

Why it applies: drill_program_type is "mixed"

TS26-004aTitac South · pgeGrade: 11.4Grade Unit: ppbIntercept: 20 mView all details
Link to this fact

Identity

Hole ID
TS26-004a
Project
Titac South
Commodity
pge
Region
usa
Reported Region
usa
Ticker
GRBM

Geometry

Grade
11.4
Grade Unit
ppb
Intercept
20 m
From
271 m
To
291 m
Intercept Depth
35 m

Classification

Deposit Type
OUI
Program
mixed
Sample Type
drill
Group ID
TS26-004a:271-291
Mining Method
open_pit

QA/QC

Laboratory
Activation Laboratories Ltd.
QA/QC Disclosed
Yes
QP Signed
Yes
QA/QC Methods
standards

Deleterious

Deleterious Flag
No

Metal Equivalent

Assumptions Disclosed
No

Review

Needs Review
No
Interp. Status
scored
Historical
No

Dates

Event date
2026-09-10T00:00:00.000Z

Reasoning: The PGE grade is very low and unlikely to be economically significant, even within this interval.

Negative factors

  • Very low PGE grade.
  • True width not determined, potentially overstating length.

Evidence · table

“11.4”

Context: 20.0

Tags used in scoring

QA/QC Disclosedpositive

Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).

Why it applies: qaqc_disclosed is true

Cut-off Undisclosednegative

High-grade interval reported without stating the cut-off grade used for compositing.

Why it applies: no cutoff_grade was stated

Infill Drillingneutral

Confirmatory drilling to raise resource confidence, not new discovery.

Why it applies: drill_program_type is "mixed"

TS26-007Titac South · copperGrade: 0.06Grade Unit: %Intercept: 362 mView all details
Link to this fact

Identity

Hole ID
TS26-007
Project
Titac South
Commodity
copper
Region
usa
Reported Region
usa
Ticker
GRBM

Geometry

Grade
0.06
Grade Unit
%
Intercept
362 m
From
20 m
To
382 m
Intercept Depth
20 m

Classification

Deposit Type
OUI
Program
exploration
Sample Type
drill
Group ID
TS26-007:20-382
Mining Method
open_pit

QA/QC

Laboratory
Activation Laboratories Ltd.
QA/QC Disclosed
Yes
QP Signed
Yes
QA/QC Methods
standards

Deleterious

Deleterious Flag
No

Metal Equivalent

Assumptions Disclosed
No

Review

Needs Review
No
Interp. Status
scored
Historical
No

Dates

Event date
2026-09-10T00:00:00.000Z

Reasoning: This very long intercept, while low-grade for copper, is highly novel as it confirms mineralization at a new target, validating the exploration model.

Positive factors

  • Exceptional intercept length of 362.0m.
  • Intersected mineralization at a previously untested geophysical target.

Negative factors

  • Weak copper grade.
  • True width not determined, potentially overstating length.

Evidence · table

“0.06”

Context: 362.0

Tags used in scoring

QA/QC Disclosedpositive

Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).

Why it applies: qaqc_disclosed is true

Cut-off Undisclosednegative

High-grade interval reported without stating the cut-off grade used for compositing.

Why it applies: no cutoff_grade was stated

TS26-007Titac South · titaniumGrade: 3.4Grade Unit: %Intercept: 362 mView all details
Link to this fact

Identity

Hole ID
TS26-007
Project
Titac South
Commodity
titanium
Region
usa
Reported Region
usa
Ticker
GRBM

Geometry

Grade
3.4
Grade Unit
%
Intercept
362 m
From
20 m
To
382 m
Intercept Depth
20 m

Classification

Deposit Type
OUI
Program
exploration
Sample Type
drill
Group ID
TS26-007:20-382
Mining Method
open_pit

QA/QC

Laboratory
Activation Laboratories Ltd.
QA/QC Disclosed
Yes
QP Signed
Yes
QA/QC Methods
standards

Deleterious

Deleterious Flag
No

Metal Equivalent

Assumptions Disclosed
No

Review

Needs Review
No
Interp. Status
scored
Historical
No

Dates

Event date
2026-09-10T00:00:00.000Z

Reasoning: This very long intercept, with a moderate titanium dioxide grade, is highly novel as it confirms mineralization at a new target, validating the exploration model.

Positive factors

  • Exceptional intercept length of 362.0m.
  • Moderate titanium dioxide grade.
  • Intersected mineralization at a previously untested geophysical target.

Negative factors

  • True width not determined, potentially overstating length.

Evidence · table

“3.40”

Context: 362.0

Tags used in scoring

QA/QC Disclosedpositive

Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).

Why it applies: qaqc_disclosed is true

Cut-off Undisclosednegative

High-grade interval reported without stating the cut-off grade used for compositing.

Why it applies: no cutoff_grade was stated

TS26-007Titac South · vanadiumGrade: 0.06Grade Unit: %Intercept: 362 mView all details
Link to this fact

Identity

Hole ID
TS26-007
Project
Titac South
Commodity
vanadium
Region
usa
Reported Region
usa
Ticker
GRBM

Geometry

Grade
0.06
Grade Unit
%
Intercept
362 m
From
20 m
To
382 m
Intercept Depth
20 m

Classification

Deposit Type
OUI
Program
exploration
Sample Type
drill
Group ID
TS26-007:20-382
Mining Method
open_pit

QA/QC

Laboratory
Activation Laboratories Ltd.
QA/QC Disclosed
Yes
QP Signed
Yes
QA/QC Methods
standards

Deleterious

Deleterious Flag
No

Metal Equivalent

Assumptions Disclosed
No

Review

Needs Review
No
Interp. Status
scored
Historical
No

Dates

Event date
2026-09-10T00:00:00.000Z

Reasoning: This very long intercept, while low-grade for vanadium, is highly novel as it confirms mineralization at a new target, validating the exploration model.

Positive factors

  • Exceptional intercept length of 362.0m.
  • Intersected mineralization at a previously untested geophysical target.

Negative factors

  • Weak vanadium grade.
  • True width not determined, potentially overstating length.

Evidence · table

“0.06”

Context: 362.0

Tags used in scoring

QA/QC Disclosedpositive

Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).

Why it applies: qaqc_disclosed is true

Cut-off Undisclosednegative

High-grade interval reported without stating the cut-off grade used for compositing.

Why it applies: no cutoff_grade was stated

TS26-007Titac South · pgeGrade: 12.6Grade Unit: ppbIntercept: 362 mView all details
Link to this fact

Identity

Hole ID
TS26-007
Project
Titac South
Commodity
pge
Region
usa
Reported Region
usa
Ticker
GRBM

Geometry

Grade
12.6
Grade Unit
ppb
Intercept
362 m
From
20 m
To
382 m
Intercept Depth
20 m

Classification

Deposit Type
OUI
Program
exploration
Sample Type
drill
Group ID
TS26-007:20-382
Mining Method
open_pit

QA/QC

Laboratory
Activation Laboratories Ltd.
QA/QC Disclosed
Yes
QP Signed
Yes
QA/QC Methods
standards

Deleterious

Deleterious Flag
No

Metal Equivalent

Assumptions Disclosed
No

Review

Needs Review
No
Interp. Status
scored
Historical
No

Dates

Event date
2026-09-10T00:00:00.000Z

Reasoning: This very long intercept, while very low-grade for PGE, is highly novel as it confirms mineralization at a new target, validating the exploration model.

Positive factors

  • Exceptional intercept length of 362.0m.
  • Intersected mineralization at a previously untested geophysical target.

Negative factors

  • Very low PGE grade.
  • True width not determined, potentially overstating length.

Evidence · table

“12.6”

Context: 362.0

Tags used in scoring

QA/QC Disclosedpositive

Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).

Why it applies: qaqc_disclosed is true

Cut-off Undisclosednegative

High-grade interval reported without stating the cut-off grade used for compositing.

Why it applies: no cutoff_grade was stated

TS26-007Titac South · copperGrade: 0.1Grade Unit: %Intercept: 10 mView all details
Link to this fact

Identity

Hole ID
TS26-007
Project
Titac South
Commodity
copper
Region
usa
Reported Region
usa
Ticker
GRBM

Geometry

Grade
0.1
Grade Unit
%
Intercept
10 m
From
234 m
To
244 m
Intercept Depth
20 m

Classification

Deposit Type
OUI
Program
exploration
Sample Type
drill
Group ID
TS26-007:234-244
Mining Method
open_pit

QA/QC

Laboratory
Activation Laboratories Ltd.
QA/QC Disclosed
Yes
QP Signed
Yes
QA/QC Methods
standards

Deleterious

Deleterious Flag
No

Metal Equivalent

Assumptions Disclosed
No

Review

Needs Review
No
Interp. Status
scored
Historical
No

Dates

Event date
2026-09-10T00:00:00.000Z

Reasoning: This narrow, weak-grade intercept is still novel as it confirms mineralization at a new target, validating the exploration model.

Positive factors

  • Intersected mineralization at a previously untested geophysical target.

Negative factors

  • Narrow intercept length.
  • Weak copper grade.
  • True width not determined, potentially overstating length.

Evidence · table

“0.10”

Context: 10.0

Tags used in scoring

QA/QC Disclosedpositive

Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).

Why it applies: qaqc_disclosed is true

Cut-off Undisclosednegative

High-grade interval reported without stating the cut-off grade used for compositing.

Why it applies: no cutoff_grade was stated

TS26-007Titac South · titaniumGrade: 5.92Grade Unit: %Intercept: 10 mView all details
Link to this fact

Identity

Hole ID
TS26-007
Project
Titac South
Commodity
titanium
Region
usa
Reported Region
usa
Ticker
GRBM

Geometry

Grade
5.92
Grade Unit
%
Intercept
10 m
From
234 m
To
244 m
Intercept Depth
20 m

Classification

Deposit Type
OUI
Program
exploration
Sample Type
drill
Group ID
TS26-007:234-244
Mining Method
open_pit

QA/QC

Laboratory
Activation Laboratories Ltd.
QA/QC Disclosed
Yes
QP Signed
Yes
QA/QC Methods
standards

Deleterious

Deleterious Flag
No

Metal Equivalent

Assumptions Disclosed
No

Review

Needs Review
No
Interp. Status
scored
Historical
No

Dates

Event date
2026-09-10T00:00:00.000Z

Reasoning: This narrow, moderate-grade intercept is still novel as it confirms mineralization at a new target, validating the exploration model.

Positive factors

  • Moderate titanium dioxide grade.
  • Intersected mineralization at a previously untested geophysical target.

Negative factors

  • Narrow intercept length.
  • True width not determined, potentially overstating length.

Evidence · table

“5.92”

Context: 10.0

Tags used in scoring

QA/QC Disclosedpositive

Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).

Why it applies: qaqc_disclosed is true

Cut-off Undisclosednegative

High-grade interval reported without stating the cut-off grade used for compositing.

Why it applies: no cutoff_grade was stated

TS26-007Titac South · vanadiumGrade: 0.16Grade Unit: %Intercept: 10 mView all details
Link to this fact

Identity

Hole ID
TS26-007
Project
Titac South
Commodity
vanadium
Region
usa
Reported Region
usa
Ticker
GRBM

Geometry

Grade
0.16
Grade Unit
%
Intercept
10 m
From
234 m
To
244 m
Intercept Depth
20 m

Classification

Deposit Type
OUI
Program
exploration
Sample Type
drill
Group ID
TS26-007:234-244
Mining Method
open_pit

QA/QC

Laboratory
Activation Laboratories Ltd.
QA/QC Disclosed
Yes
QP Signed
Yes
QA/QC Methods
standards

Deleterious

Deleterious Flag
No

Metal Equivalent

Assumptions Disclosed
No

Review

Needs Review
No
Interp. Status
scored
Historical
No

Dates

Event date
2026-09-10T00:00:00.000Z

Reasoning: This narrow, good-grade intercept is still novel as it confirms mineralization at a new target, validating the exploration model.

Positive factors

  • Good vanadium grade.
  • Intersected mineralization at a previously untested geophysical target.

Negative factors

  • Narrow intercept length.
  • True width not determined, potentially overstating length.

Evidence · table

“0.16”

Context: 10.0

Tags used in scoring

QA/QC Disclosedpositive

Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).

Why it applies: qaqc_disclosed is true

Cut-off Undisclosednegative

High-grade interval reported without stating the cut-off grade used for compositing.

Why it applies: no cutoff_grade was stated

TS26-007Titac South · pgeGrade: 9.6Grade Unit: ppbIntercept: 10 mView all details
Link to this fact

Identity

Hole ID
TS26-007
Project
Titac South
Commodity
pge
Region
usa
Reported Region
usa
Ticker
GRBM

Geometry

Grade
9.6
Grade Unit
ppb
Intercept
10 m
From
234 m
To
244 m
Intercept Depth
20 m

Classification

Deposit Type
OUI
Program
exploration
Sample Type
drill
Group ID
TS26-007:234-244
Mining Method
open_pit

QA/QC

Laboratory
Activation Laboratories Ltd.
QA/QC Disclosed
Yes
QP Signed
Yes
QA/QC Methods
standards

Deleterious

Deleterious Flag
No

Metal Equivalent

Assumptions Disclosed
No

Review

Needs Review
No
Interp. Status
scored
Historical
No

Dates

Event date
2026-09-10T00:00:00.000Z

Reasoning: This narrow, very low-grade PGE intercept is still novel as it confirms mineralization at a new target, validating the exploration model.

Positive factors

  • Intersected mineralization at a previously untested geophysical target.

Negative factors

  • Narrow intercept length.
  • Very low PGE grade.
  • True width not determined, potentially overstating length.

Evidence · table

“9.6”

Context: 10.0

Tags used in scoring

QA/QC Disclosedpositive

Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).

Why it applies: qaqc_disclosed is true

Cut-off Undisclosednegative

High-grade interval reported without stating the cut-off grade used for compositing.

Why it applies: no cutoff_grade was stated

TS26-007Titac South · pgeGrade: 17.7Grade Unit: ppbIntercept: 12 mView all details
Link to this fact

Identity

Hole ID
TS26-007
Project
Titac South
Commodity
pge
Region
usa
Reported Region
usa
Ticker
GRBM

Geometry

Grade
17.7
Grade Unit
ppb
Intercept
12 m
From
252 m
To
264 m
Intercept Depth
20 m

Classification

Deposit Type
OUI
Program
exploration
Sample Type
drill
Group ID
TS26-007:252-264
Mining Method
open_pit

QA/QC

Laboratory
Activation Laboratories Ltd.
QA/QC Disclosed
Yes
QP Signed
Yes
QA/QC Methods
standards

Deleterious

Deleterious Flag
No

Metal Equivalent

Assumptions Disclosed
No

Review

Needs Review
No
Interp. Status
scored
Historical
No

Dates

Event date
2026-09-10T00:00:00.000Z

Reasoning: This narrow, very low-grade PGE intercept is still novel as it confirms mineralization at a new target, validating the exploration model.

Positive factors

  • Intersected mineralization at a previously untested geophysical target.

Negative factors

  • Narrow intercept length.
  • Very low PGE grade.
  • True width not determined, potentially overstating length.

Evidence · table

“17.7”

Context: 12.0

Tags used in scoring

QA/QC Disclosedpositive

Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).

Why it applies: qaqc_disclosed is true

Cut-off Undisclosednegative

High-grade interval reported without stating the cut-off grade used for compositing.

Why it applies: no cutoff_grade was stated

TS26-007Titac South · copperGrade: 0.17Grade Unit: %Intercept: 16 mView all details
Link to this fact

Identity

Hole ID
TS26-007
Project
Titac South
Commodity
copper
Region
usa
Reported Region
usa
Ticker
GRBM

Geometry

Grade
0.17
Grade Unit
%
Intercept
16 m
From
284 m
To
300 m
Intercept Depth
20 m

Classification

Deposit Type
OUI
Program
exploration
Sample Type
drill
Group ID
TS26-007:284-300
Mining Method
open_pit

QA/QC

Laboratory
Activation Laboratories Ltd.
QA/QC Disclosed
Yes
QP Signed
Yes
QA/QC Methods
standards

Deleterious

Deleterious Flag
No

Metal Equivalent

Assumptions Disclosed
No

Review

Needs Review
No
Interp. Status
scored
Historical
No

Dates

Event date
2026-09-10T00:00:00.000Z

Reasoning: This moderate-length, moderate-grade intercept is still novel as it confirms mineralization at a new target, validating the exploration model.

Positive factors

  • Moderate copper grade.
  • Intersected mineralization at a previously untested geophysical target.

Negative factors

  • Moderate intercept length.
  • True width not determined, potentially overstating length.

Evidence · table

“0.17”

Context: 16.0

Tags used in scoring

QA/QC Disclosedpositive

Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).

Why it applies: qaqc_disclosed is true

Cut-off Undisclosednegative

High-grade interval reported without stating the cut-off grade used for compositing.

Why it applies: no cutoff_grade was stated

TS26-007Titac South · titaniumGrade: 6.19Grade Unit: %Intercept: 16 mView all details
Link to this fact

Identity

Hole ID
TS26-007
Project
Titac South
Commodity
titanium
Region
usa
Reported Region
usa
Ticker
GRBM

Geometry

Grade
6.19
Grade Unit
%
Intercept
16 m
From
284 m
To
300 m
Intercept Depth
20 m

Classification

Deposit Type
OUI
Program
exploration
Sample Type
drill
Group ID
TS26-007:284-300
Mining Method
open_pit

QA/QC

Laboratory
Activation Laboratories Ltd.
QA/QC Disclosed
Yes
QP Signed
Yes
QA/QC Methods
standards

Deleterious

Deleterious Flag
No

Metal Equivalent

Assumptions Disclosed
No

Review

Needs Review
No
Interp. Status
scored
Historical
No

Dates

Event date
2026-09-10T00:00:00.000Z

Reasoning: This moderate-length, moderate-grade intercept is still novel as it confirms mineralization at a new target, validating the exploration model.

Positive factors

  • Moderate titanium dioxide grade.
  • Intersected mineralization at a previously untested geophysical target.

Negative factors

  • Moderate intercept length.
  • True width not determined, potentially overstating length.

Evidence · table

“6.19”

Context: 16.0

Tags used in scoring

QA/QC Disclosedpositive

Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).

Why it applies: qaqc_disclosed is true

Cut-off Undisclosednegative

High-grade interval reported without stating the cut-off grade used for compositing.

Why it applies: no cutoff_grade was stated

TS26-007Titac South · vanadiumGrade: 0.1Grade Unit: %Intercept: 16 mView all details
Link to this fact

Identity

Hole ID
TS26-007
Project
Titac South
Commodity
vanadium
Region
usa
Reported Region
usa
Ticker
GRBM

Geometry

Grade
0.1
Grade Unit
%
Intercept
16 m
From
284 m
To
300 m
Intercept Depth
20 m

Classification

Deposit Type
OUI
Program
exploration
Sample Type
drill
Group ID
TS26-007:284-300
Mining Method
open_pit

QA/QC

Laboratory
Activation Laboratories Ltd.
QA/QC Disclosed
Yes
QP Signed
Yes
QA/QC Methods
standards

Deleterious

Deleterious Flag
No

Metal Equivalent

Assumptions Disclosed
No

Review

Needs Review
No
Interp. Status
scored
Historical
No

Dates

Event date
2026-09-10T00:00:00.000Z

Reasoning: This moderate-length, moderate-grade intercept is still novel as it confirms mineralization at a new target, validating the exploration model.

Positive factors

  • Moderate vanadium grade.
  • Intersected mineralization at a previously untested geophysical target.

Negative factors

  • Moderate intercept length.
  • True width not determined, potentially overstating length.

Evidence · table

“0.10”

Context: 16.0

Tags used in scoring

QA/QC Disclosedpositive

Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).

Why it applies: qaqc_disclosed is true

Cut-off Undisclosednegative

High-grade interval reported without stating the cut-off grade used for compositing.

Why it applies: no cutoff_grade was stated

TS26-007Titac South · pgeGrade: 23.2Grade Unit: ppbIntercept: 16 mView all details
Link to this fact

Identity

Hole ID
TS26-007
Project
Titac South
Commodity
pge
Region
usa
Reported Region
usa
Ticker
GRBM

Geometry

Grade
23.2
Grade Unit
ppb
Intercept
16 m
From
284 m
To
300 m
Intercept Depth
20 m

Classification

Deposit Type
OUI
Program
exploration
Sample Type
drill
Group ID
TS26-007:284-300
Mining Method
open_pit

QA/QC

Laboratory
Activation Laboratories Ltd.
QA/QC Disclosed
Yes
QP Signed
Yes
QA/QC Methods
standards

Deleterious

Deleterious Flag
No

Metal Equivalent

Assumptions Disclosed
No

Review

Needs Review
No
Interp. Status
scored
Historical
No

Dates

Event date
2026-09-10T00:00:00.000Z

Reasoning: This moderate-length, very low-grade PGE intercept is still novel as it confirms mineralization at a new target, validating the exploration model.

Positive factors

  • Intersected mineralization at a previously untested geophysical target.

Negative factors

  • Moderate intercept length.
  • Very low PGE grade.
  • True width not determined, potentially overstating length.

Evidence · table

“23.2”

Context: 16.0

Tags used in scoring

QA/QC Disclosedpositive

Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).

Why it applies: qaqc_disclosed is true

Cut-off Undisclosednegative

High-grade interval reported without stating the cut-off grade used for compositing.

Why it applies: no cutoff_grade was stated

How Atlas produces this analysis

Minestarters Atlas uses automated extraction to summarize mining announcements, identify reported measurements, and classify supporting evidence. Sentiment reflects the extracted narrative and classification rules; it is an interpretation, not a reported measurement. Evidence quotes and context are provided where available. Missing data, low-confidence results, and review flags indicate limitations. Check the original publisher announcement before relying on an interpretation.