# Freegold drills 1.24 g/t Au over 213m including 21m of 5.77 g/t Au at Golden Summit

Canonical Atlas analysis: https://atlas-staging.minestarters.com/news/freegold-drills-1-24-g-t-au-over-213m-including-21m-of-5-77-g-t-au-at-golden-sum--96849aa6-000c-45de-82e7-495c86653bda

Original source: https://www.newswire.ca/news-releases/freegold-drills-1-24-g-t-au-over-213m-including-21m-of-5-77-g-t-au-at-golden-summit-863399114.html

Publisher: cnw

Original announcement: 2026-10-15T11:45:48.839Z

Analysis by Minestarters Atlas

Atlas analysis published: 2026-10-15T11:50:06.381Z

Atlas analysis updated: 2026-10-15T11:50:06.381Z

- Company: Freegold Limited

- Ticker: FVL

- Exchange: Unavailable

- Region: Alaska

- Primary commodity: Gold

- Secondary commodities: None reported

- Document categories: Drill results, Other, Metallurgy, Resource update

- Extracted: 2026-10-15 11:50:07 UTC

Narrative sentiment: 0.90 · Bullish

## Minestarters Atlas summary

Freegold Limited announced exceptional drill results from its Golden Summit project in Alaska, including 213 meters at 1.24 g/t gold, with a high-grade intercept of 21 meters at 5.77 g/t gold and a bonanza intercept of 3.0 meters at 32.7 g/t gold. These results confirm strong continuity of mineralization and are intended to define a focused starting point for a 2027 pre-feasibility study. The company also reported progress on geotechnical work, metallurgical testing, and baseline programs to support the PFS design and planning.

Reasoning: The drill results from Golden Summit are highly positive, featuring exceptional gold grades over significant widths, including bonanza intercepts. The program is strategically aligned with advancing a PFS, indicating clear development intent. While true widths are not determined, the overall continuity and high-grade nature of the intercepts are very material. The QA/QC disclosure adds credibility to the results.

- Positive factor: Exceptional gold grades, including bonanza intercepts, were reported.

- Positive factor: Long continuous mineralized intervals confirm strong continuity within the resource model.

- Positive factor: Drilling is specifically aimed at defining a focused starting point for a pre-feasibility study \(PFS\), indicating progress towards development.

- Positive factor: QA/QC procedures are disclosed, including certified lab and QP sign-off.

- Negative factor: True width cannot be determined due to uncertain geometry of mineralization, which may overstate apparent widths.

Low confidence — this extraction should be reviewed alongside the original source.

Facts used in scoring: 42

## Classification and evidence

**QA/QC Disclosed**

Polarity: positive

Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\).

Why it applies: The release details the QA/QC program including laboratory, standards, and blanks, and is signed off by a Qualified Person.

Evidence · text

> The QA/QC program includes laboratory and field standards inserted every ten samples. Blanks are inserted at the start of each submittal, and at least one blank is inserted every 25 standards. Qualified Person and Disclosure Alvin Jackson, P.Geo., Vice President of Exploration and Development for Freegold, is the Qualified Person who has approved the scientific and technical disclosure in this release.

**Apparent Width Only**

Polarity: negative

Definition: Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.

Why it applies: The document explicitly states that true width cannot be determined due to uncertain geometry of mineralization.

Evidence · text

> The widths refer to drill hole intercepts; true width cannot be determined due to the uncertain geometry of mineralization.

**Infill Drilling**

Polarity: neutral

Definition: Confirmatory drilling to raise resource confidence, not new discovery.

Why it applies: The drill program includes infill holes in the Dolphin and Cleary areas, aimed at refining the geological model and increasing resource confidence for the PFS.

Evidence · text

> The eight drill holes in this release are from the ongoing 2026 program and include infill holes in the Dolphin and Cleary areas, as well as condemnation holes testing the margins of the known deposit.

**POX/BIOX Route**

Polarity: neutral

Definition: Pressure or bio-oxidation for refractory ore — high CAPEX and OPEX.

Why it applies: the document describes a pox\_biox route \("POX"\)

## Extracted facts

Stored fact records: 42. Some facts used in scoring do not have a stored record.

## Drill Results (38)

### GS2647

[Link to this fact](https://atlas-staging.minestarters.com/news/freegold-drills-1-24-g-t-au-over-213m-including-21m-of-5-77-g-t-au-at-golden-sum--96849aa6-000c-45de-82e7-495c86653bda#fact-drill-facts-0)

Golden Summit · gold

#### Identity

- Hole ID: GS2647
- Project: Golden Summit
- Commodity: gold
- Region: usa\_ak
- Reported Region: usa\_ak
- Ticker: FVL

#### Geometry

- Grade: 0.98
- Grade Unit: g/t
- Intercept: 82.3 m
- From: 136.2 m
- To: 218.5 m
- Hole Depth: 898.2 m
- Intercept Depth: 136.2 m

#### Classification

- Program: resource
- Sample Type: drill
- Group ID: GS2647:136.2-218.5
- Mining Method: open\_pit

#### Location

- Location: Dolphin Area
- Easting: 479001
- Northing: 7215086
- Azimuth: 360 °
- Dip: -90 °
- Loc. Confidence: high
- Loc. Source: document

#### QA/QC

- Laboratory: ALS
- QA/QC Disclosed: Yes
- QP Signed: Yes
- QA/QC Methods: standards, blanks, duplicates

#### Review

- Needs Review: No
- Interp. Status: scored
- Historical: No

#### Dates

- Event date: 2026-10-15T00:00:00.000Z

Reasoning: This intercept shows a moderate gold grade over a significant width, contributing to the overall resource continuity, but true width is not provided.

- Positive factor: Moderate gold grade over a significant width.

- Negative factor: True width not determined.

Evidence · table

> 0.98

Context: 82.3

#### Tags used in scoring

**Cut-off Undisclosed**

Polarity: negative

Definition: High-grade interval reported without stating the cut-off grade used for compositing.

Why it applies: no cutoff\_grade was stated

**Infill Drilling**

Polarity: neutral

Definition: Confirmatory drilling to raise resource confidence, not new discovery.

Why it applies: drill\_program\_type is "resource"

#### Rejected tags

**Apparent Width Only** — Rejected; excluded from scoring

Polarity: negative

Definition: Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.

Reason: The document explicitly states that true width cannot be determined due to uncertain geometry of mineralization.

Evidence · text

> The widths refer to drill hole intercepts; true width cannot be determined due to the uncertain geometry of mineralization.

**QA/QC Disclosed** — Rejected; excluded from scoring

Polarity: positive

Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\).

Reason: The release details the QA/QC program including laboratory, standards, and blanks, and is signed off by a Qualified Person.

Evidence · text

> The QA/QC program includes laboratory and field standards inserted every ten samples. Blanks are inserted at the start of each submittal, and at least one blank is inserted every 25 standards. Qualified Person and Disclosure Alvin Jackson, P.Geo., Vice President of Exploration and Development for Freegold, is the Qualified Person who has approved the scientific and technical disclosure in this release.

### GS2647

[Link to this fact](https://atlas-staging.minestarters.com/news/freegold-drills-1-24-g-t-au-over-213m-including-21m-of-5-77-g-t-au-at-golden-sum--96849aa6-000c-45de-82e7-495c86653bda#fact-drill-facts-1)

Golden Summit · gold

#### Identity

- Hole ID: GS2647
- Project: Golden Summit
- Commodity: gold
- Region: usa\_ak
- Reported Region: usa\_ak
- Ticker: FVL

#### Geometry

- Grade: 0.86
- Grade Unit: g/t
- Intercept: 24.3 m
- From: 242.9 m
- To: 267.2 m
- Hole Depth: 898.2 m
- Intercept Depth: 136.2 m

#### Classification

- Program: resource
- Sample Type: drill
- Group ID: GS2647:242.9-267.2
- Mining Method: open\_pit

#### Location

- Location: Dolphin Area
- Easting: 479001
- Northing: 7215086
- Azimuth: 360 °
- Dip: -90 °
- Loc. Confidence: high
- Loc. Source: document

#### QA/QC

- Laboratory: ALS
- QA/QC Disclosed: Yes
- QP Signed: Yes
- QA/QC Methods: standards, blanks, duplicates

#### Review

- Needs Review: No
- Interp. Status: scored
- Historical: No

#### Dates

- Event date: 2026-10-15T00:00:00.000Z

Reasoning: This intercept shows a moderate gold grade over a good width, contributing to the overall resource continuity, but true width is not provided.

- Positive factor: Moderate gold grade over a good width.

- Negative factor: True width not determined.

Evidence · table

> 0.86

Context: 24.3

#### Tags used in scoring

**Cut-off Undisclosed**

Polarity: negative

Definition: High-grade interval reported without stating the cut-off grade used for compositing.

Why it applies: no cutoff\_grade was stated

**Infill Drilling**

Polarity: neutral

Definition: Confirmatory drilling to raise resource confidence, not new discovery.

Why it applies: drill\_program\_type is "resource"

#### Rejected tags

**Apparent Width Only** — Rejected; excluded from scoring

Polarity: negative

Definition: Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.

Reason: The document explicitly states that true width cannot be determined due to uncertain geometry of mineralization.

Evidence · text

> The widths refer to drill hole intercepts; true width cannot be determined due to the uncertain geometry of mineralization.

**QA/QC Disclosed** — Rejected; excluded from scoring

Polarity: positive

Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\).

Reason: The release details the QA/QC program including laboratory, standards, and blanks, and is signed off by a Qualified Person.

Evidence · text

> The QA/QC program includes laboratory and field standards inserted every ten samples. Blanks are inserted at the start of each submittal, and at least one blank is inserted every 25 standards. Qualified Person and Disclosure Alvin Jackson, P.Geo., Vice President of Exploration and Development for Freegold, is the Qualified Person who has approved the scientific and technical disclosure in this release.

### GS2647

[Link to this fact](https://atlas-staging.minestarters.com/news/freegold-drills-1-24-g-t-au-over-213m-including-21m-of-5-77-g-t-au-at-golden-sum--96849aa6-000c-45de-82e7-495c86653bda#fact-drill-facts-2)

Golden Summit · gold

#### Identity

- Hole ID: GS2647
- Project: Golden Summit
- Commodity: gold
- Region: usa\_ak
- Reported Region: usa\_ak
- Ticker: FVL

#### Geometry

- Grade: 0.73
- Grade Unit: g/t
- Intercept: 375 m
- From: 367.8 m
- To: 742.8 m
- Hole Depth: 898.2 m
- Intercept Depth: 136.2 m

#### Classification

- Program: resource
- Sample Type: drill
- Group ID: GS2647:367.8-742.8
- Mining Method: open\_pit

#### Location

- Location: Dolphin Area
- Easting: 479001
- Northing: 7215086
- Azimuth: 360 °
- Dip: -90 °
- Loc. Confidence: high
- Loc. Source: document

#### QA/QC

- Laboratory: ALS
- QA/QC Disclosed: Yes
- QP Signed: Yes
- QA/QC Methods: standards, blanks, duplicates

#### Review

- Needs Review: No
- Interp. Status: scored
- Historical: No

#### Dates

- Event date: 2026-10-15T00:00:00.000Z

Reasoning: This very long intercept, despite a moderate grade, demonstrates significant mineralization continuity and a strong GT product, which is highly material for resource definition.

- Positive factor: Long continuous intercept with moderate gold grade, indicating broad mineralization.

- Positive factor: High GT product \(273.75 g/t·m\) is strong.

- Negative factor: True width not determined.

Evidence · table

> 0.73

Context: 375

#### Tags used in scoring

**Cut-off Undisclosed**

Polarity: negative

Definition: High-grade interval reported without stating the cut-off grade used for compositing.

Why it applies: no cutoff\_grade was stated

**Infill Drilling**

Polarity: neutral

Definition: Confirmatory drilling to raise resource confidence, not new discovery.

Why it applies: drill\_program\_type is "resource"

#### Rejected tags

**Apparent Width Only** — Rejected; excluded from scoring

Polarity: negative

Definition: Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.

Reason: The document explicitly states that true width cannot be determined due to uncertain geometry of mineralization.

Evidence · text

> The widths refer to drill hole intercepts; true width cannot be determined due to the uncertain geometry of mineralization.

**QA/QC Disclosed** — Rejected; excluded from scoring

Polarity: positive

Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\).

Reason: The release details the QA/QC program including laboratory, standards, and blanks, and is signed off by a Qualified Person.

Evidence · text

> The QA/QC program includes laboratory and field standards inserted every ten samples. Blanks are inserted at the start of each submittal, and at least one blank is inserted every 25 standards. Qualified Person and Disclosure Alvin Jackson, P.Geo., Vice President of Exploration and Development for Freegold, is the Qualified Person who has approved the scientific and technical disclosure in this release.

### GS2647

[Link to this fact](https://atlas-staging.minestarters.com/news/freegold-drills-1-24-g-t-au-over-213m-including-21m-of-5-77-g-t-au-at-golden-sum--96849aa6-000c-45de-82e7-495c86653bda#fact-drill-facts-3)

Golden Summit · gold

#### Identity

- Hole ID: GS2647
- Project: Golden Summit
- Commodity: gold
- Region: usa\_ak
- Reported Region: usa\_ak
- Ticker: FVL

#### Geometry

- Grade: 0.84
- Grade Unit: g/t
- Intercept: 37.8 m
- From: 388 m
- To: 425.8 m
- Hole Depth: 898.2 m
- Intercept Depth: 136.2 m

#### Classification

- Program: resource
- Sample Type: drill
- Group ID: GS2647:388-425.8
- Mining Method: open\_pit

#### Location

- Location: Dolphin Area
- Easting: 479001
- Northing: 7215086
- Azimuth: 360 °
- Dip: -90 °
- Loc. Confidence: high
- Loc. Source: document

#### QA/QC

- Laboratory: ALS
- QA/QC Disclosed: Yes
- QP Signed: Yes
- QA/QC Methods: standards, blanks, duplicates

#### Review

- Needs Review: No
- Interp. Status: scored
- Historical: No

#### Dates

- Event date: 2026-10-15T00:00:00.000Z

Reasoning: This inclusion within a larger interval shows consistent moderate gold grades over a good width, supporting the overall continuity.

- Positive factor: Moderate gold grade over a good width, contributing to the broader mineralized zone.

- Negative factor: True width not determined.

Evidence · table

> 0.84

Context: 37.8

#### Tags used in scoring

**Cut-off Undisclosed**

Polarity: negative

Definition: High-grade interval reported without stating the cut-off grade used for compositing.

Why it applies: no cutoff\_grade was stated

**Infill Drilling**

Polarity: neutral

Definition: Confirmatory drilling to raise resource confidence, not new discovery.

Why it applies: drill\_program\_type is "resource"

#### Rejected tags

**Apparent Width Only** — Rejected; excluded from scoring

Polarity: negative

Definition: Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.

Reason: The document explicitly states that true width cannot be determined due to uncertain geometry of mineralization.

Evidence · text

> The widths refer to drill hole intercepts; true width cannot be determined due to the uncertain geometry of mineralization.

**QA/QC Disclosed** — Rejected; excluded from scoring

Polarity: positive

Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\).

Reason: The release details the QA/QC program including laboratory, standards, and blanks, and is signed off by a Qualified Person.

Evidence · text

> The QA/QC program includes laboratory and field standards inserted every ten samples. Blanks are inserted at the start of each submittal, and at least one blank is inserted every 25 standards. Qualified Person and Disclosure Alvin Jackson, P.Geo., Vice President of Exploration and Development for Freegold, is the Qualified Person who has approved the scientific and technical disclosure in this release.

### GS2647

[Link to this fact](https://atlas-staging.minestarters.com/news/freegold-drills-1-24-g-t-au-over-213m-including-21m-of-5-77-g-t-au-at-golden-sum--96849aa6-000c-45de-82e7-495c86653bda#fact-drill-facts-4)

Golden Summit · gold

#### Identity

- Hole ID: GS2647
- Project: Golden Summit
- Commodity: gold
- Region: usa\_ak
- Reported Region: usa\_ak
- Ticker: FVL

#### Geometry

- Grade: 0.84
- Grade Unit: g/t
- Intercept: 112.8 m
- From: 447.1 m
- To: 559.9 m
- Hole Depth: 898.2 m
- Intercept Depth: 136.2 m

#### Classification

- Program: resource
- Sample Type: drill
- Group ID: GS2647:447.1-559.9
- Mining Method: open\_pit

#### Location

- Location: Dolphin Area
- Easting: 479001
- Northing: 7215086
- Azimuth: 360 °
- Dip: -90 °
- Loc. Confidence: high
- Loc. Source: document

#### QA/QC

- Laboratory: ALS
- QA/QC Disclosed: Yes
- QP Signed: Yes
- QA/QC Methods: standards, blanks, duplicates

#### Review

- Needs Review: No
- Interp. Status: scored
- Historical: No

#### Dates

- Event date: 2026-10-15T00:00:00.000Z

Reasoning: This long inclusion within a broader interval demonstrates significant mineralization continuity and a strong GT product, which is highly material for resource definition.

- Positive factor: Long continuous intercept with moderate gold grade, indicating broad mineralization.

- Positive factor: High GT product \(94.75 g/t·m\) is strong.

- Negative factor: True width not determined.

Evidence · table

> 0.84

Context: 112.8

#### Tags used in scoring

**Cut-off Undisclosed**

Polarity: negative

Definition: High-grade interval reported without stating the cut-off grade used for compositing.

Why it applies: no cutoff\_grade was stated

**Infill Drilling**

Polarity: neutral

Definition: Confirmatory drilling to raise resource confidence, not new discovery.

Why it applies: drill\_program\_type is "resource"

#### Rejected tags

**Apparent Width Only** — Rejected; excluded from scoring

Polarity: negative

Definition: Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.

Reason: The document explicitly states that true width cannot be determined due to uncertain geometry of mineralization.

Evidence · text

> The widths refer to drill hole intercepts; true width cannot be determined due to the uncertain geometry of mineralization.

**QA/QC Disclosed** — Rejected; excluded from scoring

Polarity: positive

Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\).

Reason: The release details the QA/QC program including laboratory, standards, and blanks, and is signed off by a Qualified Person.

Evidence · text

> The QA/QC program includes laboratory and field standards inserted every ten samples. Blanks are inserted at the start of each submittal, and at least one blank is inserted every 25 standards. Qualified Person and Disclosure Alvin Jackson, P.Geo., Vice President of Exploration and Development for Freegold, is the Qualified Person who has approved the scientific and technical disclosure in this release.

### GS2647

[Link to this fact](https://atlas-staging.minestarters.com/news/freegold-drills-1-24-g-t-au-over-213m-including-21m-of-5-77-g-t-au-at-golden-sum--96849aa6-000c-45de-82e7-495c86653bda#fact-drill-facts-5)

Golden Summit · gold

#### Identity

- Hole ID: GS2647
- Project: Golden Summit
- Commodity: gold
- Region: usa\_ak
- Reported Region: usa\_ak
- Ticker: FVL

#### Geometry

- Grade: 0.97
- Grade Unit: g/t
- Intercept: 45.7 m
- From: 474.6 m
- To: 520.3 m
- Hole Depth: 898.2 m
- Intercept Depth: 136.2 m

#### Classification

- Program: resource
- Sample Type: drill
- Group ID: GS2647:474.6-520.3
- Mining Method: open\_pit

#### Location

- Location: Dolphin Area
- Easting: 479001
- Northing: 7215086
- Azimuth: 360 °
- Dip: -90 °
- Loc. Confidence: high
- Loc. Source: document

#### QA/QC

- Laboratory: ALS
- QA/QC Disclosed: Yes
- QP Signed: Yes
- QA/QC Methods: standards, blanks, duplicates

#### Review

- Needs Review: No
- Interp. Status: scored
- Historical: No

#### Dates

- Event date: 2026-10-15T00:00:00.000Z

Reasoning: This inclusion within a larger interval shows consistent moderate gold grades over a significant width, supporting the overall continuity.

- Positive factor: Moderate gold grade over a significant width, contributing to the broader mineralized zone.

- Negative factor: True width not determined.

Evidence · table

> 0.97

Context: 45.7

#### Tags used in scoring

**Cut-off Undisclosed**

Polarity: negative

Definition: High-grade interval reported without stating the cut-off grade used for compositing.

Why it applies: no cutoff\_grade was stated

**Infill Drilling**

Polarity: neutral

Definition: Confirmatory drilling to raise resource confidence, not new discovery.

Why it applies: drill\_program\_type is "resource"

#### Rejected tags

**Apparent Width Only** — Rejected; excluded from scoring

Polarity: negative

Definition: Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.

Reason: The document explicitly states that true width cannot be determined due to uncertain geometry of mineralization.

Evidence · text

> The widths refer to drill hole intercepts; true width cannot be determined due to the uncertain geometry of mineralization.

**QA/QC Disclosed** — Rejected; excluded from scoring

Polarity: positive

Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\).

Reason: The release details the QA/QC program including laboratory, standards, and blanks, and is signed off by a Qualified Person.

Evidence · text

> The QA/QC program includes laboratory and field standards inserted every ten samples. Blanks are inserted at the start of each submittal, and at least one blank is inserted every 25 standards. Qualified Person and Disclosure Alvin Jackson, P.Geo., Vice President of Exploration and Development for Freegold, is the Qualified Person who has approved the scientific and technical disclosure in this release.

### GS2647

[Link to this fact](https://atlas-staging.minestarters.com/news/freegold-drills-1-24-g-t-au-over-213m-including-21m-of-5-77-g-t-au-at-golden-sum--96849aa6-000c-45de-82e7-495c86653bda#fact-drill-facts-6)

Golden Summit · gold

#### Identity

- Hole ID: GS2647
- Project: Golden Summit
- Commodity: gold
- Region: usa\_ak
- Reported Region: usa\_ak
- Ticker: FVL

#### Geometry

- Grade: 0.83
- Grade Unit: g/t
- Intercept: 27.4 m
- From: 633.1 m
- To: 660.5 m
- Hole Depth: 898.2 m
- Intercept Depth: 136.2 m

#### Classification

- Program: resource
- Sample Type: drill
- Group ID: GS2647:633.1-660.5
- Mining Method: open\_pit

#### Location

- Location: Dolphin Area
- Easting: 479001
- Northing: 7215086
- Azimuth: 360 °
- Dip: -90 °
- Loc. Confidence: high
- Loc. Source: document

#### QA/QC

- Laboratory: ALS
- QA/QC Disclosed: Yes
- QP Signed: Yes
- QA/QC Methods: standards, blanks, duplicates

#### Review

- Needs Review: No
- Interp. Status: scored
- Historical: No

#### Dates

- Event date: 2026-10-15T00:00:00.000Z

Reasoning: This inclusion within a larger interval shows consistent moderate gold grades over a good width, supporting the overall continuity.

- Positive factor: Moderate gold grade over a good width, contributing to the broader mineralized zone.

- Negative factor: True width not determined.

Evidence · table

> 0.83

Context: 27.4

#### Tags used in scoring

**Cut-off Undisclosed**

Polarity: negative

Definition: High-grade interval reported without stating the cut-off grade used for compositing.

Why it applies: no cutoff\_grade was stated

**Infill Drilling**

Polarity: neutral

Definition: Confirmatory drilling to raise resource confidence, not new discovery.

Why it applies: drill\_program\_type is "resource"

#### Rejected tags

**Apparent Width Only** — Rejected; excluded from scoring

Polarity: negative

Definition: Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.

Reason: The document explicitly states that true width cannot be determined due to uncertain geometry of mineralization.

Evidence · text

> The widths refer to drill hole intercepts; true width cannot be determined due to the uncertain geometry of mineralization.

**QA/QC Disclosed** — Rejected; excluded from scoring

Polarity: positive

Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\).

Reason: The release details the QA/QC program including laboratory, standards, and blanks, and is signed off by a Qualified Person.

Evidence · text

> The QA/QC program includes laboratory and field standards inserted every ten samples. Blanks are inserted at the start of each submittal, and at least one blank is inserted every 25 standards. Qualified Person and Disclosure Alvin Jackson, P.Geo., Vice President of Exploration and Development for Freegold, is the Qualified Person who has approved the scientific and technical disclosure in this release.

### GS2647

[Link to this fact](https://atlas-staging.minestarters.com/news/freegold-drills-1-24-g-t-au-over-213m-including-21m-of-5-77-g-t-au-at-golden-sum--96849aa6-000c-45de-82e7-495c86653bda#fact-drill-facts-7)

Golden Summit · gold

#### Identity

- Hole ID: GS2647
- Project: Golden Summit
- Commodity: gold
- Region: usa\_ak
- Reported Region: usa\_ak
- Ticker: FVL

#### Geometry

- Grade: 1.02
- Grade Unit: g/t
- Intercept: 33.5 m
- From: 709.3 m
- To: 742.8 m
- Hole Depth: 898.2 m
- Intercept Depth: 136.2 m

#### Classification

- Program: resource
- Sample Type: drill
- Group ID: GS2647:709.3-742.8
- Mining Method: open\_pit

#### Location

- Location: Dolphin Area
- Easting: 479001
- Northing: 7215086
- Azimuth: 360 °
- Dip: -90 °
- Loc. Confidence: high
- Loc. Source: document

#### QA/QC

- Laboratory: ALS
- QA/QC Disclosed: Yes
- QP Signed: Yes
- QA/QC Methods: standards, blanks, duplicates

#### Review

- Needs Review: No
- Interp. Status: scored
- Historical: No

#### Dates

- Event date: 2026-10-15T00:00:00.000Z

Reasoning: This inclusion within a larger interval shows consistent moderate gold grades over a significant width, supporting the overall continuity.

- Positive factor: Moderate gold grade over a significant width, contributing to the broader mineralized zone.

- Negative factor: True width not determined.

Evidence · table

> 1.02

Context: 33.5

#### Tags used in scoring

**Cut-off Undisclosed**

Polarity: negative

Definition: High-grade interval reported without stating the cut-off grade used for compositing.

Why it applies: no cutoff\_grade was stated

**Infill Drilling**

Polarity: neutral

Definition: Confirmatory drilling to raise resource confidence, not new discovery.

Why it applies: drill\_program\_type is "resource"

#### Rejected tags

**Apparent Width Only** — Rejected; excluded from scoring

Polarity: negative

Definition: Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.

Reason: The document explicitly states that true width cannot be determined due to uncertain geometry of mineralization.

Evidence · text

> The widths refer to drill hole intercepts; true width cannot be determined due to the uncertain geometry of mineralization.

**QA/QC Disclosed** — Rejected; excluded from scoring

Polarity: positive

Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\).

Reason: The release details the QA/QC program including laboratory, standards, and blanks, and is signed off by a Qualified Person.

Evidence · text

> The QA/QC program includes laboratory and field standards inserted every ten samples. Blanks are inserted at the start of each submittal, and at least one blank is inserted every 25 standards. Qualified Person and Disclosure Alvin Jackson, P.Geo., Vice President of Exploration and Development for Freegold, is the Qualified Person who has approved the scientific and technical disclosure in this release.

### GS2648

[Link to this fact](https://atlas-staging.minestarters.com/news/freegold-drills-1-24-g-t-au-over-213m-including-21m-of-5-77-g-t-au-at-golden-sum--96849aa6-000c-45de-82e7-495c86653bda#fact-drill-facts-8)

Golden Summit · gold

#### Identity

- Hole ID: GS2648
- Project: Golden Summit
- Commodity: gold
- Region: usa\_ak
- Reported Region: usa\_ak
- Ticker: FVL

#### Geometry

- Grade: 1.67
- Grade Unit: g/t
- Intercept: 30.5 m
- From: 63.1 m
- To: 93.6 m
- Hole Depth: 630 m
- Intercept Depth: 63.1 m

#### Classification

- Program: resource
- Sample Type: drill
- Group ID: GS2648:63.1-93.6
- Mining Method: open\_pit

#### Location

- Location: Dolphin Area
- Easting: 479358
- Northing: 7215450
- Azimuth: 360 °
- Dip: -90 °
- Loc. Confidence: high
- Loc. Source: document

#### QA/QC

- Laboratory: ALS
- QA/QC Disclosed: Yes
- QP Signed: Yes
- QA/QC Methods: standards, blanks, duplicates

#### Review

- Needs Review: No
- Interp. Status: scored
- Historical: No

#### Dates

- Event date: 2026-10-15T00:00:00.000Z

Reasoning: This near-surface intercept with a strong gold grade and GT product is highly material for potential early-stage mining, despite the lack of true width.

- Positive factor: Strong gold grade over a significant width, supporting starter pit optimization studies.

- Positive factor: GT product \(50.935 g/t·m\) is strong.

- Negative factor: True width not determined.

Evidence · table

> 1.67

Context: 30.5

#### Tags used in scoring

**Cut-off Undisclosed**

Polarity: negative

Definition: High-grade interval reported without stating the cut-off grade used for compositing.

Why it applies: no cutoff\_grade was stated

**Infill Drilling**

Polarity: neutral

Definition: Confirmatory drilling to raise resource confidence, not new discovery.

Why it applies: drill\_program\_type is "resource"

#### Rejected tags

**Apparent Width Only** — Rejected; excluded from scoring

Polarity: negative

Definition: Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.

Reason: The document explicitly states that true width cannot be determined due to uncertain geometry of mineralization.

Evidence · text

> The widths refer to drill hole intercepts; true width cannot be determined due to the uncertain geometry of mineralization.

**QA/QC Disclosed** — Rejected; excluded from scoring

Polarity: positive

Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\).

Reason: The release details the QA/QC program including laboratory, standards, and blanks, and is signed off by a Qualified Person.

Evidence · text

> The QA/QC program includes laboratory and field standards inserted every ten samples. Blanks are inserted at the start of each submittal, and at least one blank is inserted every 25 standards. Qualified Person and Disclosure Alvin Jackson, P.Geo., Vice President of Exploration and Development for Freegold, is the Qualified Person who has approved the scientific and technical disclosure in this release.

### GS2648

[Link to this fact](https://atlas-staging.minestarters.com/news/freegold-drills-1-24-g-t-au-over-213m-including-21m-of-5-77-g-t-au-at-golden-sum--96849aa6-000c-45de-82e7-495c86653bda#fact-drill-facts-9)

Golden Summit · gold

#### Identity

- Hole ID: GS2648
- Project: Golden Summit
- Commodity: gold
- Region: usa\_ak
- Reported Region: usa\_ak
- Ticker: FVL

#### Geometry

- Grade: 2.47
- Grade Unit: g/t
- Intercept: 18 m
- From: 63.1 m
- To: 81.1 m
- Hole Depth: 630 m
- Intercept Depth: 63.1 m

#### Classification

- Program: resource
- Sample Type: drill
- Group ID: GS2648:63.1-81.1
- Mining Method: open\_pit

#### Location

- Location: Dolphin Area
- Easting: 479358
- Northing: 7215450
- Azimuth: 360 °
- Dip: -90 °
- Loc. Confidence: high
- Loc. Source: document

#### QA/QC

- Laboratory: ALS
- QA/QC Disclosed: Yes
- QP Signed: Yes
- QA/QC Methods: standards, blanks, duplicates

#### Review

- Needs Review: No
- Interp. Status: scored
- Historical: No

#### Dates

- Event date: 2026-10-15T00:00:00.000Z

Reasoning: This high-grade inclusion within a broader near-surface intercept is very material, supporting potential early-stage mining.

- Positive factor: Strong gold grade over a good width, enhancing the broader mineralized zone.

- Positive factor: GT product \(44.46 g/t·m\) is strong.

- Negative factor: True width not determined.

Evidence · table

> 2.47

Context: 18

#### Tags used in scoring

**Cut-off Undisclosed**

Polarity: negative

Definition: High-grade interval reported without stating the cut-off grade used for compositing.

Why it applies: no cutoff\_grade was stated

**Infill Drilling**

Polarity: neutral

Definition: Confirmatory drilling to raise resource confidence, not new discovery.

Why it applies: drill\_program\_type is "resource"

#### Rejected tags

**Apparent Width Only** — Rejected; excluded from scoring

Polarity: negative

Definition: Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.

Reason: The document explicitly states that true width cannot be determined due to uncertain geometry of mineralization.

Evidence · text

> The widths refer to drill hole intercepts; true width cannot be determined due to the uncertain geometry of mineralization.

**QA/QC Disclosed** — Rejected; excluded from scoring

Polarity: positive

Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\).

Reason: The release details the QA/QC program including laboratory, standards, and blanks, and is signed off by a Qualified Person.

Evidence · text

> The QA/QC program includes laboratory and field standards inserted every ten samples. Blanks are inserted at the start of each submittal, and at least one blank is inserted every 25 standards. Qualified Person and Disclosure Alvin Jackson, P.Geo., Vice President of Exploration and Development for Freegold, is the Qualified Person who has approved the scientific and technical disclosure in this release.

### GS2648

[Link to this fact](https://atlas-staging.minestarters.com/news/freegold-drills-1-24-g-t-au-over-213m-including-21m-of-5-77-g-t-au-at-golden-sum--96849aa6-000c-45de-82e7-495c86653bda#fact-drill-facts-10)

Golden Summit · gold

#### Identity

- Hole ID: GS2648
- Project: Golden Summit
- Commodity: gold
- Region: usa\_ak
- Reported Region: usa\_ak
- Ticker: FVL

#### Geometry

- Grade: 2.09
- Grade Unit: g/t
- Intercept: 5.1 m
- From: 118 m
- To: 123.1 m
- Hole Depth: 630 m
- Intercept Depth: 63.1 m

#### Classification

- Program: resource
- Sample Type: drill
- Group ID: GS2648:118-123.1
- Mining Method: open\_pit

#### Location

- Location: Dolphin Area
- Easting: 479358
- Northing: 7215450
- Azimuth: 360 °
- Dip: -90 °
- Loc. Confidence: high
- Loc. Source: document

#### QA/QC

- Laboratory: ALS
- QA/QC Disclosed: Yes
- QP Signed: Yes
- QA/QC Methods: standards, blanks, duplicates

#### Review

- Needs Review: No
- Interp. Status: scored
- Historical: No

#### Dates

- Event date: 2026-10-15T00:00:00.000Z

Reasoning: This intercept shows a strong gold grade over a moderate width, contributing positively to the overall mineralization.

- Positive factor: Strong gold grade over a moderate width.

- Negative factor: True width not determined.

Evidence · table

> 2.09

Context: 5.1

#### Tags used in scoring

**Cut-off Undisclosed**

Polarity: negative

Definition: High-grade interval reported without stating the cut-off grade used for compositing.

Why it applies: no cutoff\_grade was stated

**Infill Drilling**

Polarity: neutral

Definition: Confirmatory drilling to raise resource confidence, not new discovery.

Why it applies: drill\_program\_type is "resource"

#### Rejected tags

**Apparent Width Only** — Rejected; excluded from scoring

Polarity: negative

Definition: Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.

Reason: The document explicitly states that true width cannot be determined due to uncertain geometry of mineralization.

Evidence · text

> The widths refer to drill hole intercepts; true width cannot be determined due to the uncertain geometry of mineralization.

**QA/QC Disclosed** — Rejected; excluded from scoring

Polarity: positive

Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\).

Reason: The release details the QA/QC program including laboratory, standards, and blanks, and is signed off by a Qualified Person.

Evidence · text

> The QA/QC program includes laboratory and field standards inserted every ten samples. Blanks are inserted at the start of each submittal, and at least one blank is inserted every 25 standards. Qualified Person and Disclosure Alvin Jackson, P.Geo., Vice President of Exploration and Development for Freegold, is the Qualified Person who has approved the scientific and technical disclosure in this release.

### GS2648

[Link to this fact](https://atlas-staging.minestarters.com/news/freegold-drills-1-24-g-t-au-over-213m-including-21m-of-5-77-g-t-au-at-golden-sum--96849aa6-000c-45de-82e7-495c86653bda#fact-drill-facts-11)

Golden Summit · gold

#### Identity

- Hole ID: GS2648
- Project: Golden Summit
- Commodity: gold
- Region: usa\_ak
- Reported Region: usa\_ak
- Ticker: FVL

#### Geometry

- Grade: 0.68
- Grade Unit: g/t
- Intercept: 18.6 m
- From: 163.4 m
- To: 182 m
- Hole Depth: 630 m
- Intercept Depth: 63.1 m

#### Classification

- Program: resource
- Sample Type: drill
- Group ID: GS2648:163.4-182
- Mining Method: open\_pit

#### Location

- Location: Dolphin Area
- Easting: 479358
- Northing: 7215450
- Azimuth: 360 °
- Dip: -90 °
- Loc. Confidence: high
- Loc. Source: document

#### QA/QC

- Laboratory: ALS
- QA/QC Disclosed: Yes
- QP Signed: Yes
- QA/QC Methods: standards, blanks, duplicates

#### Review

- Needs Review: No
- Interp. Status: scored
- Historical: No

#### Dates

- Event date: 2026-10-15T00:00:00.000Z

Reasoning: This intercept shows a moderate gold grade over a good width, contributing to the overall mineralization.

- Positive factor: Moderate gold grade over a good width.

- Negative factor: True width not determined.

Evidence · table

> 0.68

Context: 18.6

#### Tags used in scoring

**Cut-off Undisclosed**

Polarity: negative

Definition: High-grade interval reported without stating the cut-off grade used for compositing.

Why it applies: no cutoff\_grade was stated

**Infill Drilling**

Polarity: neutral

Definition: Confirmatory drilling to raise resource confidence, not new discovery.

Why it applies: drill\_program\_type is "resource"

#### Rejected tags

**Apparent Width Only** — Rejected; excluded from scoring

Polarity: negative

Definition: Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.

Reason: The document explicitly states that true width cannot be determined due to uncertain geometry of mineralization.

Evidence · text

> The widths refer to drill hole intercepts; true width cannot be determined due to the uncertain geometry of mineralization.

**QA/QC Disclosed** — Rejected; excluded from scoring

Polarity: positive

Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\).

Reason: The release details the QA/QC program including laboratory, standards, and blanks, and is signed off by a Qualified Person.

Evidence · text

> The QA/QC program includes laboratory and field standards inserted every ten samples. Blanks are inserted at the start of each submittal, and at least one blank is inserted every 25 standards. Qualified Person and Disclosure Alvin Jackson, P.Geo., Vice President of Exploration and Development for Freegold, is the Qualified Person who has approved the scientific and technical disclosure in this release.

### GS2648

[Link to this fact](https://atlas-staging.minestarters.com/news/freegold-drills-1-24-g-t-au-over-213m-including-21m-of-5-77-g-t-au-at-golden-sum--96849aa6-000c-45de-82e7-495c86653bda#fact-drill-facts-12)

Golden Summit · gold

#### Identity

- Hole ID: GS2648
- Project: Golden Summit
- Commodity: gold
- Region: usa\_ak
- Reported Region: usa\_ak
- Ticker: FVL

#### Geometry

- Grade: 0.82
- Grade Unit: g/t
- Intercept: 18.1 m
- From: 227.7 m
- To: 245.8 m
- Hole Depth: 630 m
- Intercept Depth: 63.1 m

#### Classification

- Program: resource
- Sample Type: drill
- Group ID: GS2648:227.7-245.8
- Mining Method: open\_pit

#### Location

- Location: Dolphin Area
- Easting: 479358
- Northing: 7215450
- Azimuth: 360 °
- Dip: -90 °
- Loc. Confidence: high
- Loc. Source: document

#### QA/QC

- Laboratory: ALS
- QA/QC Disclosed: Yes
- QP Signed: Yes
- QA/QC Methods: standards, blanks, duplicates

#### Review

- Needs Review: No
- Interp. Status: scored
- Historical: No

#### Dates

- Event date: 2026-10-15T00:00:00.000Z

Reasoning: This intercept shows a moderate gold grade over a good width, contributing to the overall mineralization.

- Positive factor: Moderate gold grade over a good width.

- Negative factor: True width not determined.

Evidence · table

> 0.82

Context: 18.1

#### Tags used in scoring

**Cut-off Undisclosed**

Polarity: negative

Definition: High-grade interval reported without stating the cut-off grade used for compositing.

Why it applies: no cutoff\_grade was stated

**Infill Drilling**

Polarity: neutral

Definition: Confirmatory drilling to raise resource confidence, not new discovery.

Why it applies: drill\_program\_type is "resource"

#### Rejected tags

**Apparent Width Only** — Rejected; excluded from scoring

Polarity: negative

Definition: Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.

Reason: The document explicitly states that true width cannot be determined due to uncertain geometry of mineralization.

Evidence · text

> The widths refer to drill hole intercepts; true width cannot be determined due to the uncertain geometry of mineralization.

**QA/QC Disclosed** — Rejected; excluded from scoring

Polarity: positive

Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\).

Reason: The release details the QA/QC program including laboratory, standards, and blanks, and is signed off by a Qualified Person.

Evidence · text

> The QA/QC program includes laboratory and field standards inserted every ten samples. Blanks are inserted at the start of each submittal, and at least one blank is inserted every 25 standards. Qualified Person and Disclosure Alvin Jackson, P.Geo., Vice President of Exploration and Development for Freegold, is the Qualified Person who has approved the scientific and technical disclosure in this release.

### GS2648

[Link to this fact](https://atlas-staging.minestarters.com/news/freegold-drills-1-24-g-t-au-over-213m-including-21m-of-5-77-g-t-au-at-golden-sum--96849aa6-000c-45de-82e7-495c86653bda#fact-drill-facts-13)

Golden Summit · gold

#### Identity

- Hole ID: GS2648
- Project: Golden Summit
- Commodity: gold
- Region: usa\_ak
- Reported Region: usa\_ak
- Ticker: FVL

#### Geometry

- Grade: 0.74
- Grade Unit: g/t
- Intercept: 10.5 m
- From: 296.4 m
- To: 306.9 m
- Hole Depth: 630 m
- Intercept Depth: 63.1 m

#### Classification

- Program: resource
- Sample Type: drill
- Group ID: GS2648:296.4-306.9
- Mining Method: open\_pit

#### Location

- Location: Dolphin Area
- Easting: 479358
- Northing: 7215450
- Azimuth: 360 °
- Dip: -90 °
- Loc. Confidence: high
- Loc. Source: document

#### QA/QC

- Laboratory: ALS
- QA/QC Disclosed: Yes
- QP Signed: Yes
- QA/QC Methods: standards, blanks, duplicates

#### Review

- Needs Review: No
- Interp. Status: scored
- Historical: No

#### Dates

- Event date: 2026-10-15T00:00:00.000Z

Reasoning: This intercept shows a moderate gold grade over a good width, contributing to the overall mineralization.

- Positive factor: Moderate gold grade over a good width.

- Negative factor: True width not determined.

Evidence · table

> 0.74

Context: 10.5

#### Tags used in scoring

**Cut-off Undisclosed**

Polarity: negative

Definition: High-grade interval reported without stating the cut-off grade used for compositing.

Why it applies: no cutoff\_grade was stated

**Infill Drilling**

Polarity: neutral

Definition: Confirmatory drilling to raise resource confidence, not new discovery.

Why it applies: drill\_program\_type is "resource"

#### Rejected tags

**Apparent Width Only** — Rejected; excluded from scoring

Polarity: negative

Definition: Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.

Reason: The document explicitly states that true width cannot be determined due to uncertain geometry of mineralization.

Evidence · text

> The widths refer to drill hole intercepts; true width cannot be determined due to the uncertain geometry of mineralization.

**QA/QC Disclosed** — Rejected; excluded from scoring

Polarity: positive

Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\).

Reason: The release details the QA/QC program including laboratory, standards, and blanks, and is signed off by a Qualified Person.

Evidence · text

> The QA/QC program includes laboratory and field standards inserted every ten samples. Blanks are inserted at the start of each submittal, and at least one blank is inserted every 25 standards. Qualified Person and Disclosure Alvin Jackson, P.Geo., Vice President of Exploration and Development for Freegold, is the Qualified Person who has approved the scientific and technical disclosure in this release.

### GS2648

[Link to this fact](https://atlas-staging.minestarters.com/news/freegold-drills-1-24-g-t-au-over-213m-including-21m-of-5-77-g-t-au-at-golden-sum--96849aa6-000c-45de-82e7-495c86653bda#fact-drill-facts-14)

Golden Summit · gold

#### Identity

- Hole ID: GS2648
- Project: Golden Summit
- Commodity: gold
- Region: usa\_ak
- Reported Region: usa\_ak
- Ticker: FVL

#### Geometry

- Grade: 0.89
- Grade Unit: g/t
- Intercept: 149.7 m
- From: 343.2 m
- To: 492.9 m
- Hole Depth: 630 m
- Intercept Depth: 63.1 m

#### Classification

- Program: resource
- Sample Type: drill
- Group ID: GS2648:343.2-492.9
- Mining Method: open\_pit

#### Location

- Location: Dolphin Area
- Easting: 479358
- Northing: 7215450
- Azimuth: 360 °
- Dip: -90 °
- Loc. Confidence: high
- Loc. Source: document

#### QA/QC

- Laboratory: ALS
- QA/QC Disclosed: Yes
- QP Signed: Yes
- QA/QC Methods: standards, blanks, duplicates

#### Review

- Needs Review: No
- Interp. Status: scored
- Historical: No

#### Dates

- Event date: 2026-10-15T00:00:00.000Z

Reasoning: This very long intercept, despite a moderate grade, demonstrates significant mineralization continuity and a strong GT product, which is highly material for resource definition.

- Positive factor: Long continuous intercept with moderate gold grade, indicating broad mineralization.

- Positive factor: High GT product \(133.233 g/t·m\) is strong.

- Negative factor: True width not determined.

Evidence · table

> 0.89

Context: 149.7

#### Tags used in scoring

**Cut-off Undisclosed**

Polarity: negative

Definition: High-grade interval reported without stating the cut-off grade used for compositing.

Why it applies: no cutoff\_grade was stated

**Infill Drilling**

Polarity: neutral

Definition: Confirmatory drilling to raise resource confidence, not new discovery.

Why it applies: drill\_program\_type is "resource"

#### Rejected tags

**Apparent Width Only** — Rejected; excluded from scoring

Polarity: negative

Definition: Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.

Reason: The document explicitly states that true width cannot be determined due to uncertain geometry of mineralization.

Evidence · text

> The widths refer to drill hole intercepts; true width cannot be determined due to the uncertain geometry of mineralization.

**QA/QC Disclosed** — Rejected; excluded from scoring

Polarity: positive

Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\).

Reason: The release details the QA/QC program including laboratory, standards, and blanks, and is signed off by a Qualified Person.

Evidence · text

> The QA/QC program includes laboratory and field standards inserted every ten samples. Blanks are inserted at the start of each submittal, and at least one blank is inserted every 25 standards. Qualified Person and Disclosure Alvin Jackson, P.Geo., Vice President of Exploration and Development for Freegold, is the Qualified Person who has approved the scientific and technical disclosure in this release.

### GS2648

[Link to this fact](https://atlas-staging.minestarters.com/news/freegold-drills-1-24-g-t-au-over-213m-including-21m-of-5-77-g-t-au-at-golden-sum--96849aa6-000c-45de-82e7-495c86653bda#fact-drill-facts-15)

Golden Summit · gold

#### Identity

- Hole ID: GS2648
- Project: Golden Summit
- Commodity: gold
- Region: usa\_ak
- Reported Region: usa\_ak
- Ticker: FVL

#### Geometry

- Grade: 1.11
- Grade Unit: g/t
- Intercept: 79.3 m
- From: 377 m
- To: 456.3 m
- Hole Depth: 630 m
- Intercept Depth: 63.1 m

#### Classification

- Program: resource
- Sample Type: drill
- Group ID: GS2648:377-456.3
- Mining Method: open\_pit

#### Location

- Location: Dolphin Area
- Easting: 479358
- Northing: 7215450
- Azimuth: 360 °
- Dip: -90 °
- Loc. Confidence: high
- Loc. Source: document

#### QA/QC

- Laboratory: ALS
- QA/QC Disclosed: Yes
- QP Signed: Yes
- QA/QC Methods: standards, blanks, duplicates

#### Review

- Needs Review: No
- Interp. Status: scored
- Historical: No

#### Dates

- Event date: 2026-10-15T00:00:00.000Z

Reasoning: This long inclusion within a broader interval demonstrates significant mineralization continuity and a strong GT product, which is highly material for resource definition.

- Positive factor: Long continuous intercept with moderate gold grade, indicating broad mineralization.

- Positive factor: High GT product \(88.023 g/t·m\) is strong.

- Negative factor: True width not determined.

Evidence · table

> 1.11

Context: 79.3

#### Tags used in scoring

**Cut-off Undisclosed**

Polarity: negative

Definition: High-grade interval reported without stating the cut-off grade used for compositing.

Why it applies: no cutoff\_grade was stated

**Infill Drilling**

Polarity: neutral

Definition: Confirmatory drilling to raise resource confidence, not new discovery.

Why it applies: drill\_program\_type is "resource"

#### Rejected tags

**Apparent Width Only** — Rejected; excluded from scoring

Polarity: negative

Definition: Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.

Reason: The document explicitly states that true width cannot be determined due to uncertain geometry of mineralization.

Evidence · text

> The widths refer to drill hole intercepts; true width cannot be determined due to the uncertain geometry of mineralization.

**QA/QC Disclosed** — Rejected; excluded from scoring

Polarity: positive

Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\).

Reason: The release details the QA/QC program including laboratory, standards, and blanks, and is signed off by a Qualified Person.

Evidence · text

> The QA/QC program includes laboratory and field standards inserted every ten samples. Blanks are inserted at the start of each submittal, and at least one blank is inserted every 25 standards. Qualified Person and Disclosure Alvin Jackson, P.Geo., Vice President of Exploration and Development for Freegold, is the Qualified Person who has approved the scientific and technical disclosure in this release.

### GS2656

[Link to this fact](https://atlas-staging.minestarters.com/news/freegold-drills-1-24-g-t-au-over-213m-including-21m-of-5-77-g-t-au-at-golden-sum--96849aa6-000c-45de-82e7-495c86653bda#fact-drill-facts-16)

Golden Summit · gold

#### Identity

- Hole ID: GS2656
- Project: Golden Summit
- Commodity: gold
- Region: usa\_ak
- Reported Region: usa\_ak
- Ticker: FVL

#### Geometry

- Grade: 1.89
- Grade Unit: g/t
- Intercept: 5.9 m
- From: 111.1 m
- To: 117 m
- Hole Depth: 758 m
- Intercept Depth: 111.1 m

#### Classification

- Program: resource
- Sample Type: drill
- Group ID: GS2656:111.1-117
- Mining Method: open\_pit

#### Location

- Location: Dolphin Area
- Easting: 478898
- Northing: 7215339
- Azimuth: 360 °
- Dip: -90 °
- Loc. Confidence: high
- Loc. Source: document

#### QA/QC

- Laboratory: ALS
- QA/QC Disclosed: Yes
- QP Signed: Yes
- QA/QC Methods: standards, blanks, duplicates

#### Review

- Needs Review: No
- Interp. Status: scored
- Historical: No

#### Dates

- Event date: 2026-10-15T00:00:00.000Z

Reasoning: This intercept shows a moderate gold grade over a narrow width, contributing to the overall mineralization.

- Positive factor: Moderate gold grade over a narrow width.

- Negative factor: True width not determined.

Evidence · table

> 1.89

Context: 5.9

#### Tags used in scoring

**Cut-off Undisclosed**

Polarity: negative

Definition: High-grade interval reported without stating the cut-off grade used for compositing.

Why it applies: no cutoff\_grade was stated

**Infill Drilling**

Polarity: neutral

Definition: Confirmatory drilling to raise resource confidence, not new discovery.

Why it applies: drill\_program\_type is "resource"

#### Rejected tags

**Apparent Width Only** — Rejected; excluded from scoring

Polarity: negative

Definition: Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.

Reason: The document explicitly states that true width cannot be determined due to uncertain geometry of mineralization.

Evidence · text

> The widths refer to drill hole intercepts; true width cannot be determined due to the uncertain geometry of mineralization.

**QA/QC Disclosed** — Rejected; excluded from scoring

Polarity: positive

Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\).

Reason: The release details the QA/QC program including laboratory, standards, and blanks, and is signed off by a Qualified Person.

Evidence · text

> The QA/QC program includes laboratory and field standards inserted every ten samples. Blanks are inserted at the start of each submittal, and at least one blank is inserted every 25 standards. Qualified Person and Disclosure Alvin Jackson, P.Geo., Vice President of Exploration and Development for Freegold, is the Qualified Person who has approved the scientific and technical disclosure in this release.

### GS2656

[Link to this fact](https://atlas-staging.minestarters.com/news/freegold-drills-1-24-g-t-au-over-213m-including-21m-of-5-77-g-t-au-at-golden-sum--96849aa6-000c-45de-82e7-495c86653bda#fact-drill-facts-17)

Golden Summit · gold

#### Identity

- Hole ID: GS2656
- Project: Golden Summit
- Commodity: gold
- Region: usa\_ak
- Reported Region: usa\_ak
- Ticker: FVL

#### Geometry

- Grade: 1.88
- Grade Unit: g/t
- Intercept: 3.5 m
- From: 139 m
- To: 142.5 m
- Hole Depth: 758 m
- Intercept Depth: 111.1 m

#### Classification

- Program: resource
- Sample Type: drill
- Group ID: GS2656:139-142.5
- Mining Method: open\_pit

#### Location

- Location: Dolphin Area
- Easting: 478898
- Northing: 7215339
- Azimuth: 360 °
- Dip: -90 °
- Loc. Confidence: high
- Loc. Source: document

#### QA/QC

- Laboratory: ALS
- QA/QC Disclosed: Yes
- QP Signed: Yes
- QA/QC Methods: standards, blanks, duplicates

#### Review

- Needs Review: No
- Interp. Status: scored
- Historical: No

#### Dates

- Event date: 2026-10-15T00:00:00.000Z

Reasoning: This intercept shows a moderate gold grade over a narrow width, contributing to the overall mineralization.

- Positive factor: Moderate gold grade over a narrow width.

- Negative factor: True width not determined.

Evidence · table

> 1.88

Context: 3.5

#### Tags used in scoring

**Cut-off Undisclosed**

Polarity: negative

Definition: High-grade interval reported without stating the cut-off grade used for compositing.

Why it applies: no cutoff\_grade was stated

**Infill Drilling**

Polarity: neutral

Definition: Confirmatory drilling to raise resource confidence, not new discovery.

Why it applies: drill\_program\_type is "resource"

#### Rejected tags

**Apparent Width Only** — Rejected; excluded from scoring

Polarity: negative

Definition: Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.

Reason: The document explicitly states that true width cannot be determined due to uncertain geometry of mineralization.

Evidence · text

> The widths refer to drill hole intercepts; true width cannot be determined due to the uncertain geometry of mineralization.

**QA/QC Disclosed** — Rejected; excluded from scoring

Polarity: positive

Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\).

Reason: The release details the QA/QC program including laboratory, standards, and blanks, and is signed off by a Qualified Person.

Evidence · text

> The QA/QC program includes laboratory and field standards inserted every ten samples. Blanks are inserted at the start of each submittal, and at least one blank is inserted every 25 standards. Qualified Person and Disclosure Alvin Jackson, P.Geo., Vice President of Exploration and Development for Freegold, is the Qualified Person who has approved the scientific and technical disclosure in this release.

### GS2656

[Link to this fact](https://atlas-staging.minestarters.com/news/freegold-drills-1-24-g-t-au-over-213m-including-21m-of-5-77-g-t-au-at-golden-sum--96849aa6-000c-45de-82e7-495c86653bda#fact-drill-facts-18)

Golden Summit · gold

#### Identity

- Hole ID: GS2656
- Project: Golden Summit
- Commodity: gold
- Region: usa\_ak
- Reported Region: usa\_ak
- Ticker: FVL

#### Geometry

- Grade: 1.23
- Grade Unit: g/t
- Intercept: 19.6 m
- From: 203 m
- To: 222.6 m
- Hole Depth: 758 m
- Intercept Depth: 111.1 m

#### Classification

- Program: resource
- Sample Type: drill
- Group ID: GS2656:203-222.6
- Mining Method: open\_pit

#### Location

- Location: Dolphin Area
- Easting: 478898
- Northing: 7215339
- Azimuth: 360 °
- Dip: -90 °
- Loc. Confidence: high
- Loc. Source: document

#### QA/QC

- Laboratory: ALS
- QA/QC Disclosed: Yes
- QP Signed: Yes
- QA/QC Methods: standards, blanks, duplicates

#### Review

- Needs Review: No
- Interp. Status: scored
- Historical: No

#### Dates

- Event date: 2026-10-15T00:00:00.000Z

Reasoning: This intercept shows a moderate gold grade over a good width, contributing to the overall mineralization.

- Positive factor: Moderate gold grade over a good width.

- Negative factor: True width not determined.

Evidence · table

> 1.23

Context: 19.6

#### Tags used in scoring

**Cut-off Undisclosed**

Polarity: negative

Definition: High-grade interval reported without stating the cut-off grade used for compositing.

Why it applies: no cutoff\_grade was stated

**Infill Drilling**

Polarity: neutral

Definition: Confirmatory drilling to raise resource confidence, not new discovery.

Why it applies: drill\_program\_type is "resource"

#### Rejected tags

**Apparent Width Only** — Rejected; excluded from scoring

Polarity: negative

Definition: Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.

Reason: The document explicitly states that true width cannot be determined due to uncertain geometry of mineralization.

Evidence · text

> The widths refer to drill hole intercepts; true width cannot be determined due to the uncertain geometry of mineralization.

**QA/QC Disclosed** — Rejected; excluded from scoring

Polarity: positive

Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\).

Reason: The release details the QA/QC program including laboratory, standards, and blanks, and is signed off by a Qualified Person.

Evidence · text

> The QA/QC program includes laboratory and field standards inserted every ten samples. Blanks are inserted at the start of each submittal, and at least one blank is inserted every 25 standards. Qualified Person and Disclosure Alvin Jackson, P.Geo., Vice President of Exploration and Development for Freegold, is the Qualified Person who has approved the scientific and technical disclosure in this release.

### GS2656

[Link to this fact](https://atlas-staging.minestarters.com/news/freegold-drills-1-24-g-t-au-over-213m-including-21m-of-5-77-g-t-au-at-golden-sum--96849aa6-000c-45de-82e7-495c86653bda#fact-drill-facts-19)

Golden Summit · gold

#### Identity

- Hole ID: GS2656
- Project: Golden Summit
- Commodity: gold
- Region: usa\_ak
- Reported Region: usa\_ak
- Ticker: FVL

#### Geometry

- Grade: 0.79
- Grade Unit: g/t
- Intercept: 70.3 m
- From: 236 m
- To: 306.3 m
- Hole Depth: 758 m
- Intercept Depth: 111.1 m

#### Classification

- Program: resource
- Sample Type: drill
- Group ID: GS2656:236-306.3
- Mining Method: open\_pit

#### Location

- Location: Dolphin Area
- Easting: 478898
- Northing: 7215339
- Azimuth: 360 °
- Dip: -90 °
- Loc. Confidence: high
- Loc. Source: document

#### QA/QC

- Laboratory: ALS
- QA/QC Disclosed: Yes
- QP Signed: Yes
- QA/QC Methods: standards, blanks, duplicates

#### Review

- Needs Review: No
- Interp. Status: scored
- Historical: No

#### Dates

- Event date: 2026-10-15T00:00:00.000Z

Reasoning: This long intercept, despite a moderate grade, demonstrates significant mineralization continuity and a strong GT product, which is highly material for resource definition.

- Positive factor: Long continuous intercept with moderate gold grade, indicating broad mineralization.

- Positive factor: High GT product \(55.537 g/t·m\) is strong.

- Negative factor: True width not determined.

Evidence · table

> 0.79

Context: 70.3

#### Tags used in scoring

**Cut-off Undisclosed**

Polarity: negative

Definition: High-grade interval reported without stating the cut-off grade used for compositing.

Why it applies: no cutoff\_grade was stated

**Infill Drilling**

Polarity: neutral

Definition: Confirmatory drilling to raise resource confidence, not new discovery.

Why it applies: drill\_program\_type is "resource"

#### Rejected tags

**Apparent Width Only** — Rejected; excluded from scoring

Polarity: negative

Definition: Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.

Reason: The document explicitly states that true width cannot be determined due to uncertain geometry of mineralization.

Evidence · text

> The widths refer to drill hole intercepts; true width cannot be determined due to the uncertain geometry of mineralization.

**QA/QC Disclosed** — Rejected; excluded from scoring

Polarity: positive

Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\).

Reason: The release details the QA/QC program including laboratory, standards, and blanks, and is signed off by a Qualified Person.

Evidence · text

> The QA/QC program includes laboratory and field standards inserted every ten samples. Blanks are inserted at the start of each submittal, and at least one blank is inserted every 25 standards. Qualified Person and Disclosure Alvin Jackson, P.Geo., Vice President of Exploration and Development for Freegold, is the Qualified Person who has approved the scientific and technical disclosure in this release.

### GS2656

[Link to this fact](https://atlas-staging.minestarters.com/news/freegold-drills-1-24-g-t-au-over-213m-including-21m-of-5-77-g-t-au-at-golden-sum--96849aa6-000c-45de-82e7-495c86653bda#fact-drill-facts-20)

Golden Summit · gold

#### Identity

- Hole ID: GS2656
- Project: Golden Summit
- Commodity: gold
- Region: usa\_ak
- Reported Region: usa\_ak
- Ticker: FVL

#### Geometry

- Grade: 2.85
- Grade Unit: g/t
- Intercept: 6 m
- From: 236 m
- To: 242 m
- Hole Depth: 758 m
- Intercept Depth: 111.1 m

#### Classification

- Program: resource
- Sample Type: drill
- Group ID: GS2656:236-242
- Mining Method: open\_pit

#### Location

- Location: Dolphin Area
- Easting: 478898
- Northing: 7215339
- Azimuth: 360 °
- Dip: -90 °
- Loc. Confidence: high
- Loc. Source: document

#### QA/QC

- Laboratory: ALS
- QA/QC Disclosed: Yes
- QP Signed: Yes
- QA/QC Methods: standards, blanks, duplicates

#### Review

- Needs Review: No
- Interp. Status: scored
- Historical: No

#### Dates

- Event date: 2026-10-15T00:00:00.000Z

Reasoning: This high-grade inclusion within a broader intercept is material, contributing positively to the overall mineralization.

- Positive factor: Strong gold grade over a good width, enhancing the broader mineralized zone.

- Positive factor: GT product \(17.1 g/t·m\) is moderate.

- Negative factor: True width not determined.

Evidence · table

> 2.85

Context: 6.0

#### Tags used in scoring

**Cut-off Undisclosed**

Polarity: negative

Definition: High-grade interval reported without stating the cut-off grade used for compositing.

Why it applies: no cutoff\_grade was stated

**Infill Drilling**

Polarity: neutral

Definition: Confirmatory drilling to raise resource confidence, not new discovery.

Why it applies: drill\_program\_type is "resource"

#### Rejected tags

**Apparent Width Only** — Rejected; excluded from scoring

Polarity: negative

Definition: Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.

Reason: The document explicitly states that true width cannot be determined due to uncertain geometry of mineralization.

Evidence · text

> The widths refer to drill hole intercepts; true width cannot be determined due to the uncertain geometry of mineralization.

**QA/QC Disclosed** — Rejected; excluded from scoring

Polarity: positive

Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\).

Reason: The release details the QA/QC program including laboratory, standards, and blanks, and is signed off by a Qualified Person.

Evidence · text

> The QA/QC program includes laboratory and field standards inserted every ten samples. Blanks are inserted at the start of each submittal, and at least one blank is inserted every 25 standards. Qualified Person and Disclosure Alvin Jackson, P.Geo., Vice President of Exploration and Development for Freegold, is the Qualified Person who has approved the scientific and technical disclosure in this release.

### GS2656

[Link to this fact](https://atlas-staging.minestarters.com/news/freegold-drills-1-24-g-t-au-over-213m-including-21m-of-5-77-g-t-au-at-golden-sum--96849aa6-000c-45de-82e7-495c86653bda#fact-drill-facts-21)

Golden Summit · gold

#### Identity

- Hole ID: GS2656
- Project: Golden Summit
- Commodity: gold
- Region: usa\_ak
- Reported Region: usa\_ak
- Ticker: FVL

#### Geometry

- Grade: 1.24
- Grade Unit: g/t
- Intercept: 213 m
- From: 422 m
- To: 635 m
- Hole Depth: 758 m
- Intercept Depth: 111.1 m

#### Classification

- Program: resource
- Sample Type: drill
- Group ID: GS2656:422-635
- Mining Method: open\_pit

#### Location

- Location: Dolphin Area
- Easting: 478898
- Northing: 7215339
- Azimuth: 360 °
- Dip: -90 °
- Loc. Confidence: high
- Loc. Source: document

#### QA/QC

- Laboratory: ALS
- QA/QC Disclosed: Yes
- QP Signed: Yes
- QA/QC Methods: standards, blanks, duplicates

#### Review

- Needs Review: No
- Interp. Status: scored
- Historical: No

#### Dates

- Event date: 2026-10-15T00:00:00.000Z

Reasoning: This very long intercept with a moderate gold grade and strong GT product is highly material, demonstrating significant mineralization continuity and supporting resource definition for the PFS.

- Positive factor: Exceptional length with moderate gold grade, indicating significant mineralization.

- Positive factor: High GT product \(264.12 g/t·m\) is strong.

- Negative factor: True width not determined.

Evidence · table

> 1.24

Context: 213.0

#### Tags used in scoring

**Cut-off Undisclosed**

Polarity: negative

Definition: High-grade interval reported without stating the cut-off grade used for compositing.

Why it applies: no cutoff\_grade was stated

**Infill Drilling**

Polarity: neutral

Definition: Confirmatory drilling to raise resource confidence, not new discovery.

Why it applies: drill\_program\_type is "resource"

#### Rejected tags

**Apparent Width Only** — Rejected; excluded from scoring

Polarity: negative

Definition: Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.

Reason: The document explicitly states that true width cannot be determined due to uncertain geometry of mineralization.

Evidence · text

> The widths refer to drill hole intercepts; true width cannot be determined due to the uncertain geometry of mineralization.

**QA/QC Disclosed** — Rejected; excluded from scoring

Polarity: positive

Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\).

Reason: The release details the QA/QC program including laboratory, standards, and blanks, and is signed off by a Qualified Person.

Evidence · text

> The QA/QC program includes laboratory and field standards inserted every ten samples. Blanks are inserted at the start of each submittal, and at least one blank is inserted every 25 standards. Qualified Person and Disclosure Alvin Jackson, P.Geo., Vice President of Exploration and Development for Freegold, is the Qualified Person who has approved the scientific and technical disclosure in this release.

### GS2656

[Link to this fact](https://atlas-staging.minestarters.com/news/freegold-drills-1-24-g-t-au-over-213m-including-21m-of-5-77-g-t-au-at-golden-sum--96849aa6-000c-45de-82e7-495c86653bda#fact-drill-facts-22)

Golden Summit · gold

#### Identity

- Hole ID: GS2656
- Project: Golden Summit
- Commodity: gold
- Region: usa\_ak
- Reported Region: usa\_ak
- Ticker: FVL

#### Geometry

- Grade: 5.77
- Grade Unit: g/t
- Intercept: 21 m
- From: 467 m
- To: 488 m
- Hole Depth: 758 m
- Intercept Depth: 111.1 m

#### Classification

- Program: resource
- Sample Type: drill
- Group ID: GS2656:467-488
- Mining Method: open\_pit

#### Location

- Location: Dolphin Area
- Easting: 478898
- Northing: 7215339
- Azimuth: 360 °
- Dip: -90 °
- Loc. Confidence: high
- Loc. Source: document

#### QA/QC

- Laboratory: ALS
- QA/QC Disclosed: Yes
- QP Signed: Yes
- QA/QC Methods: standards, blanks, duplicates

#### Review

- Needs Review: No
- Interp. Status: scored
- Historical: No

#### Dates

- Event date: 2026-10-15T00:00:00.000Z

Reasoning: This exceptional high-grade inclusion within a broader intercept is very material, significantly contributing to the overall resource potential.

- Positive factor: Exceptional gold grade over a significant width, enhancing the broader mineralized zone.

- Positive factor: High GT product \(121.17 g/t·m\) is strong.

- Negative factor: True width not determined.

Evidence · table

> 5.77

Context: 21

#### Tags used in scoring

**Cut-off Undisclosed**

Polarity: negative

Definition: High-grade interval reported without stating the cut-off grade used for compositing.

Why it applies: no cutoff\_grade was stated

**Infill Drilling**

Polarity: neutral

Definition: Confirmatory drilling to raise resource confidence, not new discovery.

Why it applies: drill\_program\_type is "resource"

#### Rejected tags

**Bonanza Intercept** — Rejected; excluded from scoring

Polarity: positive

Definition: Exceptionally high-grade zone, well above the deposit-type norm.

Reason: The grade of 5.77 g/t Au over 21m is well above the exceptional threshold for gold in an open pit setting \(5 g/t Au\).

Evidence · table

> 5.77

Context: 21

**Apparent Width Only** — Rejected; excluded from scoring

Polarity: negative

Definition: Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.

Reason: The document explicitly states that true width cannot be determined due to uncertain geometry of mineralization.

Evidence · text

> The widths refer to drill hole intercepts; true width cannot be determined due to the uncertain geometry of mineralization.

**QA/QC Disclosed** — Rejected; excluded from scoring

Polarity: positive

Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\).

Reason: The release details the QA/QC program including laboratory, standards, and blanks, and is signed off by a Qualified Person.

Evidence · text

> The QA/QC program includes laboratory and field standards inserted every ten samples. Blanks are inserted at the start of each submittal, and at least one blank is inserted every 25 standards. Qualified Person and Disclosure Alvin Jackson, P.Geo., Vice President of Exploration and Development for Freegold, is the Qualified Person who has approved the scientific and technical disclosure in this release.

### GS2656

[Link to this fact](https://atlas-staging.minestarters.com/news/freegold-drills-1-24-g-t-au-over-213m-including-21m-of-5-77-g-t-au-at-golden-sum--96849aa6-000c-45de-82e7-495c86653bda#fact-drill-facts-23)

Golden Summit · gold

#### Identity

- Hole ID: GS2656
- Project: Golden Summit
- Commodity: gold
- Region: usa\_ak
- Reported Region: usa\_ak
- Ticker: FVL

#### Geometry

- Grade: 32.7
- Grade Unit: g/t
- Intercept: 3 m
- From: 482 m
- To: 485 m
- Hole Depth: 758 m
- Intercept Depth: 111.1 m

#### Classification

- Program: resource
- Sample Type: drill
- Group ID: GS2656:482-485
- Mining Method: open\_pit

#### Location

- Location: Dolphin Area
- Easting: 478898
- Northing: 7215339
- Azimuth: 360 °
- Dip: -90 °
- Loc. Confidence: high
- Loc. Source: document

#### QA/QC

- Laboratory: ALS
- QA/QC Disclosed: Yes
- QP Signed: Yes
- QA/QC Methods: standards, blanks, duplicates

#### Review

- Needs Review: No
- Interp. Status: scored
- Historical: No

#### Dates

- Event date: 2026-10-15T00:00:00.000Z

Reasoning: This bonanza-grade inclusion within a broader intercept is highly material, indicating a very high-grade zone within the deposit.

- Positive factor: Bonanza gold grade over a narrow width, significantly enhancing the broader mineralized zone.

- Positive factor: High GT product \(98.1 g/t·m\) is strong.

- Negative factor: True width not determined.

Evidence · table

> 32.7

Context: 3.0

#### Tags used in scoring

**Cut-off Undisclosed**

Polarity: negative

Definition: High-grade interval reported without stating the cut-off grade used for compositing.

Why it applies: no cutoff\_grade was stated

**Infill Drilling**

Polarity: neutral

Definition: Confirmatory drilling to raise resource confidence, not new discovery.

Why it applies: drill\_program\_type is "resource"

#### Rejected tags

**Bonanza Intercept** — Rejected; excluded from scoring

Polarity: positive

Definition: Exceptionally high-grade zone, well above the deposit-type norm.

Reason: The grade of 32.7 g/t Au over 3m is well above the exceptional threshold for gold in an open pit setting \(5 g/t Au\).

Evidence · table

> 32.7

Context: 3.0

**Apparent Width Only** — Rejected; excluded from scoring

Polarity: negative

Definition: Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.

Reason: The document explicitly states that true width cannot be determined due to uncertain geometry of mineralization.

Evidence · text

> The widths refer to drill hole intercepts; true width cannot be determined due to the uncertain geometry of mineralization.

**QA/QC Disclosed** — Rejected; excluded from scoring

Polarity: positive

Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\).

Reason: The release details the QA/QC program including laboratory, standards, and blanks, and is signed off by a Qualified Person.

Evidence · text

> The QA/QC program includes laboratory and field standards inserted every ten samples. Blanks are inserted at the start of each submittal, and at least one blank is inserted every 25 standards. Qualified Person and Disclosure Alvin Jackson, P.Geo., Vice President of Exploration and Development for Freegold, is the Qualified Person who has approved the scientific and technical disclosure in this release.

### GS2656

[Link to this fact](https://atlas-staging.minestarters.com/news/freegold-drills-1-24-g-t-au-over-213m-including-21m-of-5-77-g-t-au-at-golden-sum--96849aa6-000c-45de-82e7-495c86653bda#fact-drill-facts-24)

Golden Summit · gold

#### Identity

- Hole ID: GS2656
- Project: Golden Summit
- Commodity: gold
- Region: usa\_ak
- Reported Region: usa\_ak
- Ticker: FVL

#### Geometry

- Grade: 1.2
- Grade Unit: g/t
- Intercept: 11.7 m
- From: 515 m
- To: 526.7 m
- Hole Depth: 758 m
- Intercept Depth: 111.1 m

#### Classification

- Program: resource
- Sample Type: drill
- Group ID: GS2656:515-526.7
- Mining Method: open\_pit

#### Location

- Location: Dolphin Area
- Easting: 478898
- Northing: 7215339
- Azimuth: 360 °
- Dip: -90 °
- Loc. Confidence: high
- Loc. Source: document

#### QA/QC

- Laboratory: ALS
- QA/QC Disclosed: Yes
- QP Signed: Yes
- QA/QC Methods: standards, blanks, duplicates

#### Review

- Needs Review: No
- Interp. Status: scored
- Historical: No

#### Dates

- Event date: 2026-10-15T00:00:00.000Z

Reasoning: This inclusion within a larger interval shows consistent moderate gold grades over a good width, supporting the overall continuity.

- Positive factor: Moderate gold grade over a good width, contributing to the broader mineralized zone.

- Negative factor: True width not determined.

Evidence · table

> 1.20

Context: 11.7

#### Tags used in scoring

**Cut-off Undisclosed**

Polarity: negative

Definition: High-grade interval reported without stating the cut-off grade used for compositing.

Why it applies: no cutoff\_grade was stated

**Infill Drilling**

Polarity: neutral

Definition: Confirmatory drilling to raise resource confidence, not new discovery.

Why it applies: drill\_program\_type is "resource"

#### Rejected tags

**Apparent Width Only** — Rejected; excluded from scoring

Polarity: negative

Definition: Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.

Reason: The document explicitly states that true width cannot be determined due to uncertain geometry of mineralization.

Evidence · text

> The widths refer to drill hole intercepts; true width cannot be determined due to the uncertain geometry of mineralization.

**QA/QC Disclosed** — Rejected; excluded from scoring

Polarity: positive

Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\).

Reason: The release details the QA/QC program including laboratory, standards, and blanks, and is signed off by a Qualified Person.

Evidence · text

> The QA/QC program includes laboratory and field standards inserted every ten samples. Blanks are inserted at the start of each submittal, and at least one blank is inserted every 25 standards. Qualified Person and Disclosure Alvin Jackson, P.Geo., Vice President of Exploration and Development for Freegold, is the Qualified Person who has approved the scientific and technical disclosure in this release.

### GS2656

[Link to this fact](https://atlas-staging.minestarters.com/news/freegold-drills-1-24-g-t-au-over-213m-including-21m-of-5-77-g-t-au-at-golden-sum--96849aa6-000c-45de-82e7-495c86653bda#fact-drill-facts-25)

Golden Summit · gold

#### Identity

- Hole ID: GS2656
- Project: Golden Summit
- Commodity: gold
- Region: usa\_ak
- Reported Region: usa\_ak
- Ticker: FVL

#### Geometry

- Grade: 3.29
- Grade Unit: g/t
- Intercept: 6 m
- From: 539 m
- To: 545 m
- Hole Depth: 758 m
- Intercept Depth: 111.1 m

#### Classification

- Program: resource
- Sample Type: drill
- Group ID: GS2656:539-545
- Mining Method: open\_pit

#### Location

- Location: Dolphin Area
- Easting: 478898
- Northing: 7215339
- Azimuth: 360 °
- Dip: -90 °
- Loc. Confidence: high
- Loc. Source: document

#### QA/QC

- Laboratory: ALS
- QA/QC Disclosed: Yes
- QP Signed: Yes
- QA/QC Methods: standards, blanks, duplicates

#### Review

- Needs Review: No
- Interp. Status: scored
- Historical: No

#### Dates

- Event date: 2026-10-15T00:00:00.000Z

Reasoning: This high-grade inclusion within a broader intercept is material, contributing positively to the overall mineralization.

- Positive factor: Strong gold grade over a good width, enhancing the broader mineralized zone.

- Positive factor: GT product \(19.74 g/t·m\) is moderate.

- Negative factor: True width not determined.

Evidence · table

> 3.29

Context: 6.0

#### Tags used in scoring

**Cut-off Undisclosed**

Polarity: negative

Definition: High-grade interval reported without stating the cut-off grade used for compositing.

Why it applies: no cutoff\_grade was stated

**Infill Drilling**

Polarity: neutral

Definition: Confirmatory drilling to raise resource confidence, not new discovery.

Why it applies: drill\_program\_type is "resource"

#### Rejected tags

**Apparent Width Only** — Rejected; excluded from scoring

Polarity: negative

Definition: Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.

Reason: The document explicitly states that true width cannot be determined due to uncertain geometry of mineralization.

Evidence · text

> The widths refer to drill hole intercepts; true width cannot be determined due to the uncertain geometry of mineralization.

**QA/QC Disclosed** — Rejected; excluded from scoring

Polarity: positive

Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\).

Reason: The release details the QA/QC program including laboratory, standards, and blanks, and is signed off by a Qualified Person.

Evidence · text

> The QA/QC program includes laboratory and field standards inserted every ten samples. Blanks are inserted at the start of each submittal, and at least one blank is inserted every 25 standards. Qualified Person and Disclosure Alvin Jackson, P.Geo., Vice President of Exploration and Development for Freegold, is the Qualified Person who has approved the scientific and technical disclosure in this release.

### GS2656

[Link to this fact](https://atlas-staging.minestarters.com/news/freegold-drills-1-24-g-t-au-over-213m-including-21m-of-5-77-g-t-au-at-golden-sum--96849aa6-000c-45de-82e7-495c86653bda#fact-drill-facts-26)

Golden Summit · gold

#### Identity

- Hole ID: GS2656
- Project: Golden Summit
- Commodity: gold
- Region: usa\_ak
- Reported Region: usa\_ak
- Ticker: FVL

#### Geometry

- Grade: 1.26
- Grade Unit: g/t
- Intercept: 18.9 m
- From: 562.9 m
- To: 581.8 m
- Hole Depth: 758 m
- Intercept Depth: 111.1 m

#### Classification

- Program: resource
- Sample Type: drill
- Group ID: GS2656:562.9-581.8
- Mining Method: open\_pit

#### Location

- Location: Dolphin Area
- Easting: 478898
- Northing: 7215339
- Azimuth: 360 °
- Dip: -90 °
- Loc. Confidence: high
- Loc. Source: document

#### QA/QC

- Laboratory: ALS
- QA/QC Disclosed: Yes
- QP Signed: Yes
- QA/QC Methods: standards, blanks, duplicates

#### Review

- Needs Review: No
- Interp. Status: scored
- Historical: No

#### Dates

- Event date: 2026-10-15T00:00:00.000Z

Reasoning: This inclusion within a larger interval shows consistent moderate gold grades over a good width, supporting the overall continuity.

- Positive factor: Moderate gold grade over a good width, contributing to the broader mineralized zone.

- Negative factor: True width not determined.

Evidence · table

> 1.26

Context: 18.9

#### Tags used in scoring

**Cut-off Undisclosed**

Polarity: negative

Definition: High-grade interval reported without stating the cut-off grade used for compositing.

Why it applies: no cutoff\_grade was stated

**Infill Drilling**

Polarity: neutral

Definition: Confirmatory drilling to raise resource confidence, not new discovery.

Why it applies: drill\_program\_type is "resource"

#### Rejected tags

**Apparent Width Only** — Rejected; excluded from scoring

Polarity: negative

Definition: Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.

Reason: The document explicitly states that true width cannot be determined due to uncertain geometry of mineralization.

Evidence · text

> The widths refer to drill hole intercepts; true width cannot be determined due to the uncertain geometry of mineralization.

**QA/QC Disclosed** — Rejected; excluded from scoring

Polarity: positive

Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\).

Reason: The release details the QA/QC program including laboratory, standards, and blanks, and is signed off by a Qualified Person.

Evidence · text

> The QA/QC program includes laboratory and field standards inserted every ten samples. Blanks are inserted at the start of each submittal, and at least one blank is inserted every 25 standards. Qualified Person and Disclosure Alvin Jackson, P.Geo., Vice President of Exploration and Development for Freegold, is the Qualified Person who has approved the scientific and technical disclosure in this release.

### GS2656

[Link to this fact](https://atlas-staging.minestarters.com/news/freegold-drills-1-24-g-t-au-over-213m-including-21m-of-5-77-g-t-au-at-golden-sum--96849aa6-000c-45de-82e7-495c86653bda#fact-drill-facts-27)

Golden Summit · gold

#### Identity

- Hole ID: GS2656
- Project: Golden Summit
- Commodity: gold
- Region: usa\_ak
- Reported Region: usa\_ak
- Ticker: FVL

#### Geometry

- Grade: 1.05
- Grade Unit: g/t
- Intercept: 39 m
- From: 596 m
- To: 635 m
- Hole Depth: 758 m
- Intercept Depth: 111.1 m

#### Classification

- Program: resource
- Sample Type: drill
- Group ID: GS2656:596-635
- Mining Method: open\_pit

#### Location

- Location: Dolphin Area
- Easting: 478898
- Northing: 7215339
- Azimuth: 360 °
- Dip: -90 °
- Loc. Confidence: high
- Loc. Source: document

#### QA/QC

- Laboratory: ALS
- QA/QC Disclosed: Yes
- QP Signed: Yes
- QA/QC Methods: standards, blanks, duplicates

#### Review

- Needs Review: No
- Interp. Status: scored
- Historical: No

#### Dates

- Event date: 2026-10-15T00:00:00.000Z

Reasoning: This inclusion within a larger interval shows consistent moderate gold grades over a significant width, supporting the overall continuity.

- Positive factor: Moderate gold grade over a significant width, contributing to the broader mineralized zone.

- Negative factor: True width not determined.

Evidence · table

> 1.05

Context: 39.0

#### Tags used in scoring

**Cut-off Undisclosed**

Polarity: negative

Definition: High-grade interval reported without stating the cut-off grade used for compositing.

Why it applies: no cutoff\_grade was stated

**Infill Drilling**

Polarity: neutral

Definition: Confirmatory drilling to raise resource confidence, not new discovery.

Why it applies: drill\_program\_type is "resource"

#### Rejected tags

**Apparent Width Only** — Rejected; excluded from scoring

Polarity: negative

Definition: Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.

Reason: The document explicitly states that true width cannot be determined due to uncertain geometry of mineralization.

Evidence · text

> The widths refer to drill hole intercepts; true width cannot be determined due to the uncertain geometry of mineralization.

**QA/QC Disclosed** — Rejected; excluded from scoring

Polarity: positive

Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\).

Reason: The release details the QA/QC program including laboratory, standards, and blanks, and is signed off by a Qualified Person.

Evidence · text

> The QA/QC program includes laboratory and field standards inserted every ten samples. Blanks are inserted at the start of each submittal, and at least one blank is inserted every 25 standards. Qualified Person and Disclosure Alvin Jackson, P.Geo., Vice President of Exploration and Development for Freegold, is the Qualified Person who has approved the scientific and technical disclosure in this release.

### GS2644

[Link to this fact](https://atlas-staging.minestarters.com/news/freegold-drills-1-24-g-t-au-over-213m-including-21m-of-5-77-g-t-au-at-golden-sum--96849aa6-000c-45de-82e7-495c86653bda#fact-drill-facts-28)

Golden Summit · gold

#### Identity

- Hole ID: GS2644
- Project: Golden Summit
- Commodity: gold
- Region: usa\_ak
- Reported Region: usa\_ak
- Ticker: FVL

#### Geometry

- Grade: 0.97
- Grade Unit: g/t
- Intercept: 9.1 m
- From: 160.6 m
- To: 169.7 m
- Hole Depth: 349.6 m
- Intercept Depth: 160.6 m

#### Classification

- Program: resource
- Sample Type: drill
- Group ID: GS2644:160.6-169.7
- Mining Method: open\_pit

#### Location

- Location: Cleary Area
- Easting: 479803
- Northing: 7215303
- Azimuth: 360 °
- Dip: -90 °
- Loc. Confidence: high
- Loc. Source: document

#### QA/QC

- Laboratory: ALS
- QA/QC Disclosed: Yes
- QP Signed: Yes
- QA/QC Methods: standards, blanks, duplicates

#### Review

- Needs Review: No
- Interp. Status: scored
- Historical: No

#### Dates

- Event date: 2026-10-15T00:00:00.000Z

Reasoning: This intercept shows a moderate gold grade over a good width, contributing to the overall mineralization in the Cleary Area.

- Positive factor: Moderate gold grade over a good width.

- Negative factor: True width not determined.

Evidence · table

> 0.97

Context: 9.1

#### Tags used in scoring

**Cut-off Undisclosed**

Polarity: negative

Definition: High-grade interval reported without stating the cut-off grade used for compositing.

Why it applies: no cutoff\_grade was stated

**Infill Drilling**

Polarity: neutral

Definition: Confirmatory drilling to raise resource confidence, not new discovery.

Why it applies: drill\_program\_type is "resource"

#### Rejected tags

**Apparent Width Only** — Rejected; excluded from scoring

Polarity: negative

Definition: Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.

Reason: The document explicitly states that true width cannot be determined due to uncertain geometry of mineralization.

Evidence · text

> The widths refer to drill hole intercepts; true width cannot be determined due to the uncertain geometry of mineralization.

**QA/QC Disclosed** — Rejected; excluded from scoring

Polarity: positive

Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\).

Reason: The release details the QA/QC program including laboratory, standards, and blanks, and is signed off by a Qualified Person.

Evidence · text

> The QA/QC program includes laboratory and field standards inserted every ten samples. Blanks are inserted at the start of each submittal, and at least one blank is inserted every 25 standards. Qualified Person and Disclosure Alvin Jackson, P.Geo., Vice President of Exploration and Development for Freegold, is the Qualified Person who has approved the scientific and technical disclosure in this release.

### GS2644

[Link to this fact](https://atlas-staging.minestarters.com/news/freegold-drills-1-24-g-t-au-over-213m-including-21m-of-5-77-g-t-au-at-golden-sum--96849aa6-000c-45de-82e7-495c86653bda#fact-drill-facts-29)

Golden Summit · gold

#### Identity

- Hole ID: GS2644
- Project: Golden Summit
- Commodity: gold
- Region: usa\_ak
- Reported Region: usa\_ak
- Ticker: FVL

#### Geometry

- Grade: 1.03
- Grade Unit: g/t
- Intercept: 17.9 m
- From: 252.1 m
- To: 270 m
- Hole Depth: 349.6 m
- Intercept Depth: 160.6 m

#### Classification

- Program: resource
- Sample Type: drill
- Group ID: GS2644:252.1-270
- Mining Method: open\_pit

#### Location

- Location: Cleary Area
- Easting: 479803
- Northing: 7215303
- Azimuth: 360 °
- Dip: -90 °
- Loc. Confidence: high
- Loc. Source: document

#### QA/QC

- Laboratory: ALS
- QA/QC Disclosed: Yes
- QP Signed: Yes
- QA/QC Methods: standards, blanks, duplicates

#### Review

- Needs Review: No
- Interp. Status: scored
- Historical: No

#### Dates

- Event date: 2026-10-15T00:00:00.000Z

Reasoning: This intercept shows a moderate gold grade over a good width, contributing to the overall mineralization in the Cleary Area.

- Positive factor: Moderate gold grade over a good width.

- Negative factor: True width not determined.

Evidence · table

> 1.03

Context: 17.9

#### Tags used in scoring

**Cut-off Undisclosed**

Polarity: negative

Definition: High-grade interval reported without stating the cut-off grade used for compositing.

Why it applies: no cutoff\_grade was stated

**Infill Drilling**

Polarity: neutral

Definition: Confirmatory drilling to raise resource confidence, not new discovery.

Why it applies: drill\_program\_type is "resource"

#### Rejected tags

**Apparent Width Only** — Rejected; excluded from scoring

Polarity: negative

Definition: Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.

Reason: The document explicitly states that true width cannot be determined due to uncertain geometry of mineralization.

Evidence · text

> The widths refer to drill hole intercepts; true width cannot be determined due to the uncertain geometry of mineralization.

**QA/QC Disclosed** — Rejected; excluded from scoring

Polarity: positive

Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\).

Reason: The release details the QA/QC program including laboratory, standards, and blanks, and is signed off by a Qualified Person.

Evidence · text

> The QA/QC program includes laboratory and field standards inserted every ten samples. Blanks are inserted at the start of each submittal, and at least one blank is inserted every 25 standards. Qualified Person and Disclosure Alvin Jackson, P.Geo., Vice President of Exploration and Development for Freegold, is the Qualified Person who has approved the scientific and technical disclosure in this release.

### GS2644

[Link to this fact](https://atlas-staging.minestarters.com/news/freegold-drills-1-24-g-t-au-over-213m-including-21m-of-5-77-g-t-au-at-golden-sum--96849aa6-000c-45de-82e7-495c86653bda#fact-drill-facts-30)

Golden Summit · gold

#### Identity

- Hole ID: GS2644
- Project: Golden Summit
- Commodity: gold
- Region: usa\_ak
- Reported Region: usa\_ak
- Ticker: FVL

#### Geometry

- Grade: 1.01
- Grade Unit: g/t
- Intercept: 7.1 m
- From: 315.1 m
- To: 322.2 m
- Hole Depth: 349.6 m
- Intercept Depth: 160.6 m

#### Classification

- Program: resource
- Sample Type: drill
- Group ID: GS2644:315.1-322.2
- Mining Method: open\_pit

#### Location

- Location: Cleary Area
- Easting: 479803
- Northing: 7215303
- Azimuth: 360 °
- Dip: -90 °
- Loc. Confidence: high
- Loc. Source: document

#### QA/QC

- Laboratory: ALS
- QA/QC Disclosed: Yes
- QP Signed: Yes
- QA/QC Methods: standards, blanks, duplicates

#### Review

- Needs Review: No
- Interp. Status: scored
- Historical: No

#### Dates

- Event date: 2026-10-15T00:00:00.000Z

Reasoning: This intercept shows a moderate gold grade over a good width, contributing to the overall mineralization in the Cleary Area.

- Positive factor: Moderate gold grade over a good width.

- Negative factor: True width not determined.

Evidence · table

> 1.01

Context: 7.1

#### Tags used in scoring

**Cut-off Undisclosed**

Polarity: negative

Definition: High-grade interval reported without stating the cut-off grade used for compositing.

Why it applies: no cutoff\_grade was stated

**Infill Drilling**

Polarity: neutral

Definition: Confirmatory drilling to raise resource confidence, not new discovery.

Why it applies: drill\_program\_type is "resource"

#### Rejected tags

**Apparent Width Only** — Rejected; excluded from scoring

Polarity: negative

Definition: Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.

Reason: The document explicitly states that true width cannot be determined due to uncertain geometry of mineralization.

Evidence · text

> The widths refer to drill hole intercepts; true width cannot be determined due to the uncertain geometry of mineralization.

**QA/QC Disclosed** — Rejected; excluded from scoring

Polarity: positive

Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\).

Reason: The release details the QA/QC program including laboratory, standards, and blanks, and is signed off by a Qualified Person.

Evidence · text

> The QA/QC program includes laboratory and field standards inserted every ten samples. Blanks are inserted at the start of each submittal, and at least one blank is inserted every 25 standards. Qualified Person and Disclosure Alvin Jackson, P.Geo., Vice President of Exploration and Development for Freegold, is the Qualified Person who has approved the scientific and technical disclosure in this release.

### GS2652

[Link to this fact](https://atlas-staging.minestarters.com/news/freegold-drills-1-24-g-t-au-over-213m-including-21m-of-5-77-g-t-au-at-golden-sum--96849aa6-000c-45de-82e7-495c86653bda#fact-drill-facts-31)

Golden Summit · gold

#### Identity

- Hole ID: GS2652
- Project: Golden Summit
- Commodity: gold
- Region: usa\_ak
- Reported Region: usa\_ak
- Ticker: FVL

#### Geometry

- Grade: 2.1
- Grade Unit: g/t
- Intercept: 9.1 m
- From: 270.4 m
- To: 279.5 m
- Hole Depth: 346.6 m
- Intercept Depth: 270.4 m

#### Classification

- Program: resource
- Sample Type: drill
- Group ID: GS2652:270.4-279.5
- Mining Method: open\_pit

#### Location

- Location: Cleary Area
- Easting: 479754
- Northing: 7215281
- Azimuth: 360 °
- Dip: -75 °
- Loc. Confidence: high
- Loc. Source: document

#### QA/QC

- Laboratory: ALS
- QA/QC Disclosed: Yes
- QP Signed: Yes
- QA/QC Methods: standards, blanks, duplicates

#### Review

- Needs Review: No
- Interp. Status: scored
- Historical: No

#### Dates

- Event date: 2026-10-15T00:00:00.000Z

Reasoning: This intercept shows a strong gold grade over a good width, contributing positively to the overall mineralization in the Cleary Area.

- Positive factor: Strong gold grade over a good width.

- Negative factor: True width not determined.

Evidence · table

> 2.1

Context: 9.1

#### Tags used in scoring

**Cut-off Undisclosed**

Polarity: negative

Definition: High-grade interval reported without stating the cut-off grade used for compositing.

Why it applies: no cutoff\_grade was stated

**Infill Drilling**

Polarity: neutral

Definition: Confirmatory drilling to raise resource confidence, not new discovery.

Why it applies: drill\_program\_type is "resource"

#### Rejected tags

**Apparent Width Only** — Rejected; excluded from scoring

Polarity: negative

Definition: Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.

Reason: The document explicitly states that true width cannot be determined due to uncertain geometry of mineralization.

Evidence · text

> The widths refer to drill hole intercepts; true width cannot be determined due to the uncertain geometry of mineralization.

**QA/QC Disclosed** — Rejected; excluded from scoring

Polarity: positive

Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\).

Reason: The release details the QA/QC program including laboratory, standards, and blanks, and is signed off by a Qualified Person.

Evidence · text

> The QA/QC program includes laboratory and field standards inserted every ten samples. Blanks are inserted at the start of each submittal, and at least one blank is inserted every 25 standards. Qualified Person and Disclosure Alvin Jackson, P.Geo., Vice President of Exploration and Development for Freegold, is the Qualified Person who has approved the scientific and technical disclosure in this release.

### GS2642

[Link to this fact](https://atlas-staging.minestarters.com/news/freegold-drills-1-24-g-t-au-over-213m-including-21m-of-5-77-g-t-au-at-golden-sum--96849aa6-000c-45de-82e7-495c86653bda#fact-drill-facts-32)

Golden Summit · gold

#### Identity

- Hole ID: GS2642
- Project: Golden Summit
- Commodity: gold
- Region: usa\_ak
- Reported Region: usa\_ak
- Ticker: FVL

#### Geometry

- Grade: 1.81
- Grade Unit: g/t
- Intercept: 5.5 m
- From: 70.2 m
- To: 75.7 m
- Hole Depth: 209 m
- Intercept Depth: 70.2 m

#### Classification

- Program: exploration
- Sample Type: drill
- Group ID: GS2642:70.2-75.7
- Mining Method: open\_pit

#### Location

- Location: Dolphin Area
- Easting: 479255
- Northing: 7215624
- Azimuth: 360 °
- Dip: -75 °
- Loc. Confidence: high
- Loc. Source: document

#### QA/QC

- Laboratory: ALS
- QA/QC Disclosed: Yes
- QP Signed: Yes
- QA/QC Methods: standards, blanks, duplicates

#### Review

- Needs Review: No
- Interp. Status: scored
- Historical: No

#### Dates

- Event date: 2026-10-15T00:00:00.000Z

Reasoning: This intercept shows a moderate gold grade over a narrow width, contributing to the overall mineralization, but from a condemnation hole.

- Positive factor: Moderate gold grade over a narrow width.

- Negative factor: True width not determined.

Evidence · table

> 1.81

Context: 5.5

#### Tags used in scoring

**Cut-off Undisclosed**

Polarity: negative

Definition: High-grade interval reported without stating the cut-off grade used for compositing.

Why it applies: no cutoff\_grade was stated

#### Rejected tags

**Apparent Width Only** — Rejected; excluded from scoring

Polarity: negative

Definition: Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.

Reason: The document explicitly states that true width cannot be determined due to uncertain geometry of mineralization.

Evidence · text

> The widths refer to drill hole intercepts; true width cannot be determined due to the uncertain geometry of mineralization.

**QA/QC Disclosed** — Rejected; excluded from scoring

Polarity: positive

Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\).

Reason: The release details the QA/QC program including laboratory, standards, and blanks, and is signed off by a Qualified Person.

Evidence · text

> The QA/QC program includes laboratory and field standards inserted every ten samples. Blanks are inserted at the start of each submittal, and at least one blank is inserted every 25 standards. Qualified Person and Disclosure Alvin Jackson, P.Geo., Vice President of Exploration and Development for Freegold, is the Qualified Person who has approved the scientific and technical disclosure in this release.

### GS2643

[Link to this fact](https://atlas-staging.minestarters.com/news/freegold-drills-1-24-g-t-au-over-213m-including-21m-of-5-77-g-t-au-at-golden-sum--96849aa6-000c-45de-82e7-495c86653bda#fact-drill-facts-33)

Golden Summit · gold

#### Identity

- Hole ID: GS2643
- Project: Golden Summit
- Commodity: gold
- Region: usa\_ak
- Reported Region: usa\_ak
- Ticker: FVL

#### Geometry

- Grade: 3.45
- Grade Unit: g/t
- Intercept: 3 m
- From: 134 m
- To: 137 m
- Hole Depth: 281.6 m
- Intercept Depth: 134 m

#### Classification

- Program: exploration
- Sample Type: drill
- Group ID: GS2643:134-137
- Mining Method: open\_pit

#### Location

- Location: Dolphin Area
- Easting: 479154
- Northing: 7215742
- Azimuth: 360 °
- Dip: -75 °
- Loc. Confidence: high
- Loc. Source: document

#### QA/QC

- Laboratory: ALS
- QA/QC Disclosed: Yes
- QP Signed: Yes
- QA/QC Methods: standards, blanks, duplicates

#### Review

- Needs Review: No
- Interp. Status: scored
- Historical: No

#### Dates

- Event date: 2026-10-15T00:00:00.000Z

Reasoning: This intercept shows a strong gold grade over a narrow width, but it's from a condemnation hole, which limits its positive impact on resource growth.

- Positive factor: Strong gold grade over a narrow width.

- Negative factor: True width not determined.

- Negative factor: From a condemnation hole, testing limits of the system.

Evidence · table

> 3.45

Context: 3

#### Tags used in scoring

**Cut-off Undisclosed**

Polarity: negative

Definition: High-grade interval reported without stating the cut-off grade used for compositing.

Why it applies: no cutoff\_grade was stated

#### Rejected tags

**Apparent Width Only** — Rejected; excluded from scoring

Polarity: negative

Definition: Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.

Reason: The document explicitly states that true width cannot be determined due to uncertain geometry of mineralization.

Evidence · text

> The widths refer to drill hole intercepts; true width cannot be determined due to the uncertain geometry of mineralization.

**QA/QC Disclosed** — Rejected; excluded from scoring

Polarity: positive

Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\).

Reason: The release details the QA/QC program including laboratory, standards, and blanks, and is signed off by a Qualified Person.

Evidence · text

> The QA/QC program includes laboratory and field standards inserted every ten samples. Blanks are inserted at the start of each submittal, and at least one blank is inserted every 25 standards. Qualified Person and Disclosure Alvin Jackson, P.Geo., Vice President of Exploration and Development for Freegold, is the Qualified Person who has approved the scientific and technical disclosure in this release.

### GS2643

[Link to this fact](https://atlas-staging.minestarters.com/news/freegold-drills-1-24-g-t-au-over-213m-including-21m-of-5-77-g-t-au-at-golden-sum--96849aa6-000c-45de-82e7-495c86653bda#fact-drill-facts-34)

Golden Summit · gold

#### Identity

- Hole ID: GS2643
- Project: Golden Summit
- Commodity: gold
- Region: usa\_ak
- Reported Region: usa\_ak
- Ticker: FVL

#### Geometry

- Grade: 0.96
- Grade Unit: g/t
- Intercept: 5.8 m
- From: 161 m
- To: 166.8 m
- Hole Depth: 281.6 m
- Intercept Depth: 134 m

#### Classification

- Program: exploration
- Sample Type: drill
- Group ID: GS2643:161-166.8
- Mining Method: open\_pit

#### Location

- Location: Dolphin Area
- Easting: 479154
- Northing: 7215742
- Azimuth: 360 °
- Dip: -75 °
- Loc. Confidence: high
- Loc. Source: document

#### QA/QC

- Laboratory: ALS
- QA/QC Disclosed: Yes
- QP Signed: Yes
- QA/QC Methods: standards, blanks, duplicates

#### Review

- Needs Review: No
- Interp. Status: scored
- Historical: No

#### Dates

- Event date: 2026-10-15T00:00:00.000Z

Reasoning: This intercept shows a moderate gold grade over a narrow width, but it's from a condemnation hole, which limits its positive impact on resource growth.

- Positive factor: Moderate gold grade over a narrow width.

- Negative factor: True width not determined.

- Negative factor: From a condemnation hole, testing limits of the system.

Evidence · table

> 0.96

Context: 5.8

#### Tags used in scoring

**Cut-off Undisclosed**

Polarity: negative

Definition: High-grade interval reported without stating the cut-off grade used for compositing.

Why it applies: no cutoff\_grade was stated

#### Rejected tags

**Apparent Width Only** — Rejected; excluded from scoring

Polarity: negative

Definition: Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.

Reason: The document explicitly states that true width cannot be determined due to uncertain geometry of mineralization.

Evidence · text

> The widths refer to drill hole intercepts; true width cannot be determined due to the uncertain geometry of mineralization.

**QA/QC Disclosed** — Rejected; excluded from scoring

Polarity: positive

Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\).

Reason: The release details the QA/QC program including laboratory, standards, and blanks, and is signed off by a Qualified Person.

Evidence · text

> The QA/QC program includes laboratory and field standards inserted every ten samples. Blanks are inserted at the start of each submittal, and at least one blank is inserted every 25 standards. Qualified Person and Disclosure Alvin Jackson, P.Geo., Vice President of Exploration and Development for Freegold, is the Qualified Person who has approved the scientific and technical disclosure in this release.

### GS2645

[Link to this fact](https://atlas-staging.minestarters.com/news/freegold-drills-1-24-g-t-au-over-213m-including-21m-of-5-77-g-t-au-at-golden-sum--96849aa6-000c-45de-82e7-495c86653bda#fact-drill-facts-35)

Golden Summit · gold

#### Identity

- Hole ID: GS2645
- Project: Golden Summit
- Commodity: gold
- Region: usa\_ak
- Reported Region: usa\_ak
- Ticker: FVL

#### Geometry

- Grade: 0.85
- Grade Unit: g/t
- Intercept: 4.1 m
- From: 20 m
- To: 24.1 m
- Hole Depth: 425 m
- Intercept Depth: 20 m

#### Classification

- Program: exploration
- Sample Type: drill
- Group ID: GS2645:20-24.1
- Mining Method: open\_pit

#### Location

- Location: Dolphin Area
- Easting: 479200
- Northing: 7215703
- Azimuth: 360 °
- Dip: -75 °
- Loc. Confidence: high
- Loc. Source: document

#### QA/QC

- Laboratory: ALS
- QA/QC Disclosed: Yes
- QP Signed: Yes
- QA/QC Methods: standards, blanks, duplicates

#### Review

- Needs Review: No
- Interp. Status: scored
- Historical: No

#### Dates

- Event date: 2026-10-15T00:00:00.000Z

Reasoning: This intercept shows a moderate gold grade over a narrow width, but it's from a condemnation hole, which limits its positive impact on resource growth.

- Positive factor: Moderate gold grade over a narrow width.

- Negative factor: True width not determined.

- Negative factor: From a condemnation hole, testing limits of the system.

Evidence · table

> 0.85

Context: 4.1

#### Tags used in scoring

**Cut-off Undisclosed**

Polarity: negative

Definition: High-grade interval reported without stating the cut-off grade used for compositing.

Why it applies: no cutoff\_grade was stated

#### Rejected tags

**Apparent Width Only** — Rejected; excluded from scoring

Polarity: negative

Definition: Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.

Reason: The document explicitly states that true width cannot be determined due to uncertain geometry of mineralization.

Evidence · text

> The widths refer to drill hole intercepts; true width cannot be determined due to the uncertain geometry of mineralization.

**QA/QC Disclosed** — Rejected; excluded from scoring

Polarity: positive

Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\).

Reason: The release details the QA/QC program including laboratory, standards, and blanks, and is signed off by a Qualified Person.

Evidence · text

> The QA/QC program includes laboratory and field standards inserted every ten samples. Blanks are inserted at the start of each submittal, and at least one blank is inserted every 25 standards. Qualified Person and Disclosure Alvin Jackson, P.Geo., Vice President of Exploration and Development for Freegold, is the Qualified Person who has approved the scientific and technical disclosure in this release.

### GS2645

[Link to this fact](https://atlas-staging.minestarters.com/news/freegold-drills-1-24-g-t-au-over-213m-including-21m-of-5-77-g-t-au-at-golden-sum--96849aa6-000c-45de-82e7-495c86653bda#fact-drill-facts-36)

Golden Summit · gold

#### Identity

- Hole ID: GS2645
- Project: Golden Summit
- Commodity: gold
- Region: usa\_ak
- Reported Region: usa\_ak
- Ticker: FVL

#### Geometry

- Grade: 1.12
- Grade Unit: g/t
- Intercept: 10.4 m
- From: 51.1 m
- To: 61.5 m
- Hole Depth: 425 m
- Intercept Depth: 20 m

#### Classification

- Program: exploration
- Sample Type: drill
- Group ID: GS2645:51.1-61.5
- Mining Method: open\_pit

#### Location

- Location: Dolphin Area
- Easting: 479200
- Northing: 7215703
- Azimuth: 360 °
- Dip: -75 °
- Loc. Confidence: high
- Loc. Source: document

#### QA/QC

- Laboratory: ALS
- QA/QC Disclosed: Yes
- QP Signed: Yes
- QA/QC Methods: standards, blanks, duplicates

#### Review

- Needs Review: No
- Interp. Status: scored
- Historical: No

#### Dates

- Event date: 2026-10-15T00:00:00.000Z

Reasoning: This intercept shows a moderate gold grade over a good width, but it's from a condemnation hole, which limits its positive impact on resource growth.

- Positive factor: Moderate gold grade over a good width.

- Negative factor: True width not determined.

- Negative factor: From a condemnation hole, testing limits of the system.

Evidence · table

> 1.12

Context: 10.4

#### Tags used in scoring

**Cut-off Undisclosed**

Polarity: negative

Definition: High-grade interval reported without stating the cut-off grade used for compositing.

Why it applies: no cutoff\_grade was stated

#### Rejected tags

**Apparent Width Only** — Rejected; excluded from scoring

Polarity: negative

Definition: Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.

Reason: The document explicitly states that true width cannot be determined due to uncertain geometry of mineralization.

Evidence · text

> The widths refer to drill hole intercepts; true width cannot be determined due to the uncertain geometry of mineralization.

**QA/QC Disclosed** — Rejected; excluded from scoring

Polarity: positive

Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\).

Reason: The release details the QA/QC program including laboratory, standards, and blanks, and is signed off by a Qualified Person.

Evidence · text

> The QA/QC program includes laboratory and field standards inserted every ten samples. Blanks are inserted at the start of each submittal, and at least one blank is inserted every 25 standards. Qualified Person and Disclosure Alvin Jackson, P.Geo., Vice President of Exploration and Development for Freegold, is the Qualified Person who has approved the scientific and technical disclosure in this release.

### GS2645

[Link to this fact](https://atlas-staging.minestarters.com/news/freegold-drills-1-24-g-t-au-over-213m-including-21m-of-5-77-g-t-au-at-golden-sum--96849aa6-000c-45de-82e7-495c86653bda#fact-drill-facts-37)

Golden Summit · gold

#### Identity

- Hole ID: GS2645
- Project: Golden Summit
- Commodity: gold
- Region: usa\_ak
- Reported Region: usa\_ak
- Ticker: FVL

#### Geometry

- Grade: 2.55
- Grade Unit: g/t
- Intercept: 6 m
- From: 140 m
- To: 146 m
- Hole Depth: 425 m
- Intercept Depth: 20 m

#### Classification

- Program: exploration
- Sample Type: drill
- Group ID: GS2645:140-146
- Mining Method: open\_pit

#### Location

- Location: Dolphin Area
- Easting: 479200
- Northing: 7215703
- Azimuth: 360 °
- Dip: -75 °
- Loc. Confidence: high
- Loc. Source: document

#### QA/QC

- Laboratory: ALS
- QA/QC Disclosed: Yes
- QP Signed: Yes
- QA/QC Methods: standards, blanks, duplicates

#### Review

- Needs Review: No
- Interp. Status: scored
- Historical: No

#### Dates

- Event date: 2026-10-15T00:00:00.000Z

Reasoning: This intercept shows a strong gold grade over a good width, but it's from a condemnation hole, which limits its positive impact on resource growth.

- Positive factor: Strong gold grade over a good width.

- Negative factor: True width not determined.

- Negative factor: From a condemnation hole, testing limits of the system.

Evidence · table

> 2.55

Context: 6

#### Tags used in scoring

**Cut-off Undisclosed**

Polarity: negative

Definition: High-grade interval reported without stating the cut-off grade used for compositing.

Why it applies: no cutoff\_grade was stated

#### Rejected tags

**Apparent Width Only** — Rejected; excluded from scoring

Polarity: negative

Definition: Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.

Reason: The document explicitly states that true width cannot be determined due to uncertain geometry of mineralization.

Evidence · text

> The widths refer to drill hole intercepts; true width cannot be determined due to the uncertain geometry of mineralization.

**QA/QC Disclosed** — Rejected; excluded from scoring

Polarity: positive

Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\).

Reason: The release details the QA/QC program including laboratory, standards, and blanks, and is signed off by a Qualified Person.

Evidence · text

> The QA/QC program includes laboratory and field standards inserted every ten samples. Blanks are inserted at the start of each submittal, and at least one blank is inserted every 25 standards. Qualified Person and Disclosure Alvin Jackson, P.Geo., Vice President of Exploration and Development for Freegold, is the Qualified Person who has approved the scientific and technical disclosure in this release.

## Resource Estimates (4)

### indicated

[Link to this fact](https://atlas-staging.minestarters.com/news/freegold-drills-1-24-g-t-au-over-213m-including-21m-of-5-77-g-t-au-at-golden-sum--96849aa6-000c-45de-82e7-495c86653bda#fact-resource-facts-38)

Golden Summit · gold

Historical result

Needs review: historical\_restatement

#### Identity

- Project: Golden Summit
- Commodity: gold
- Region: usa\_ak
- Reported Region: Alaska
- Ticker: FVL

#### Resource scope

- Estimate type: resource
- Effective date: 2025-07-01T00:00:00.000Z
- Resource group id: resource:0d3220860f98926e9fa6
- Material type: oxide

#### Resource Data

- Category: indicated
- Tonnes: 63700000
- Grade: 0.45
- Grade Unit: g/t
- Contained Metal: 920000
- Contained Unit: oz
- Cutoff Grade: 0.15
- Cutoff Unit: g/t

#### Prior Estimate

- Resource Date: 2025-07-01

#### Review

- Needs Review: Yes
- Review Reason: historical\_restatement
- Historical: Yes
- Historical Source Date: 2025-07-01T00:00:00.000Z

#### Dates

- Event date: 2026-10-15T00:00:00.000Z

Reasoning: This is a historical indicated oxide resource with a low gold grade, but it represents a significant tonnage for potential early feed for a starter pit.

- Positive factor: Significant indicated oxide resource tonnage.

- Negative factor: Low grade for gold.

- Negative factor: Historical estimate, not new information.

Evidence · text

> As of July 2025, Golden Summit hosts an Indicated Oxide Resource of 920,000 ounces at 0.45 g/t Au \(63.7 million tonnes\) and an Inferred Oxide Mineral Resource of 287,000 ounces at 0.47 g/t Au \(18.8 million tonnes \(using a 0.15 g/t cut off\)

#### Tags used in scoring

**Indicated Resource**

Polarity: positive

Definition: Reasonable geological confidence based on adequate drilling; continuity can be assumed. Basis for Probable Reserves.

Why it applies: category is "indicated"

**Cut-off Disclosed**

Polarity: positive

Definition: Cut-off grade used for resource reporting is clearly stated, enabling like-for-like comparison.

Why it applies: cutoff\_grade is stated

**Resource Update**

Polarity: neutral

Definition: Revised estimate for an existing resource — compare to prior to assess progress.

Why it applies: the release compares against a previous estimate

**PEA-Supporting**

Polarity: neutral

Definition: Resource estimate prepared to support a Preliminary Economic Assessment — early-stage study.

Why it applies: the release names the study this estimate supports

**PFS-Supporting**

Polarity: neutral

Definition: Resource estimate prepared to support a Pre-Feasibility Study — requires adequate M&I component.

Why it applies: the release names the study this estimate supports

**DFS-Supporting**

Polarity: neutral

Definition: Resource estimate prepared to support a Definitive Feasibility Study — requires high M&I confidence.

Why it applies: the release names the study this estimate supports

### inferred

[Link to this fact](https://atlas-staging.minestarters.com/news/freegold-drills-1-24-g-t-au-over-213m-including-21m-of-5-77-g-t-au-at-golden-sum--96849aa6-000c-45de-82e7-495c86653bda#fact-resource-facts-39)

Golden Summit · gold

Historical result

Needs review: historical\_restatement

#### Identity

- Project: Golden Summit
- Commodity: gold
- Region: usa\_ak
- Reported Region: Alaska
- Ticker: FVL

#### Resource scope

- Estimate type: resource
- Effective date: 2025-07-01T00:00:00.000Z
- Resource group id: resource:78dc58e4f95e86afb6cd
- Material type: oxide

#### Resource Data

- Category: inferred
- Tonnes: 18800000
- Grade: 0.47
- Grade Unit: g/t
- Contained Metal: 287000
- Contained Unit: oz
- Cutoff Grade: 0.15
- Cutoff Unit: g/t

#### Prior Estimate

- Resource Date: 2025-07-01

#### Review

- Needs Review: Yes
- Review Reason: historical\_restatement
- Historical: Yes
- Historical Source Date: 2025-07-01T00:00:00.000Z

#### Dates

- Event date: 2026-10-15T00:00:00.000Z

Reasoning: This is a historical inferred oxide resource with a low gold grade and lower confidence, but it adds to the overall oxide potential.

- Positive factor: Significant inferred oxide resource tonnage.

- Negative factor: Low grade for gold.

- Negative factor: Inferred category indicates lower geological confidence.

- Negative factor: Historical estimate, not new information.

Evidence · text

> As of July 2025, Golden Summit hosts an Indicated Oxide Resource of 920,000 ounces at 0.45 g/t Au \(63.7 million tonnes\) and an Inferred Oxide Mineral Resource of 287,000 ounces at 0.47 g/t Au \(18.8 million tonnes \(using a 0.15 g/t cut off\)

#### Tags used in scoring

**Cut-off Disclosed**

Polarity: positive

Definition: Cut-off grade used for resource reporting is clearly stated, enabling like-for-like comparison.

Why it applies: cutoff\_grade is stated

**Resource Update**

Polarity: neutral

Definition: Revised estimate for an existing resource — compare to prior to assess progress.

Why it applies: the release compares against a previous estimate

**PEA-Supporting**

Polarity: neutral

Definition: Resource estimate prepared to support a Preliminary Economic Assessment — early-stage study.

Why it applies: the release names the study this estimate supports

**PFS-Supporting**

Polarity: neutral

Definition: Resource estimate prepared to support a Pre-Feasibility Study — requires adequate M&I component.

Why it applies: the release names the study this estimate supports

**DFS-Supporting**

Polarity: neutral

Definition: Resource estimate prepared to support a Definitive Feasibility Study — requires high M&I confidence.

Why it applies: the release names the study this estimate supports

### indicated

[Link to this fact](https://atlas-staging.minestarters.com/news/freegold-drills-1-24-g-t-au-over-213m-including-21m-of-5-77-g-t-au-at-golden-sum--96849aa6-000c-45de-82e7-495c86653bda#fact-resource-facts-40)

Golden Summit · gold

Historical result

Needs review: historical\_restatement

#### Identity

- Project: Golden Summit
- Commodity: gold
- Region: usa\_ak
- Reported Region: Alaska
- Ticker: FVL

#### Resource scope

- Estimate type: resource
- Effective date: 2025-07-01T00:00:00.000Z
- Resource group id: resource:9a95abf4e293b060210d
- Material type: Primary

#### Resource Data

- Category: indicated
- Tonnes: 432000000
- Grade: 1.24
- Grade Unit: g/t
- Contained Metal: 17.2
- Contained Unit: moz
- Cutoff Grade: 0.5
- Cutoff Unit: g/t

#### Prior Estimate

- Resource Date: 2025-07-01

#### Review

- Needs Review: Yes
- Review Reason: historical\_restatement
- Historical: Yes
- Historical Source Date: 2025-07-01T00:00:00.000Z

#### Dates

- Event date: 2026-10-15T00:00:00.000Z

Reasoning: This is a historical indicated primary resource with a very large tonnage and good gold grade, representing a significant part of the project's overall potential.

- Positive factor: Very large indicated primary resource tonnage with a good gold grade.

- Negative factor: Historical estimate, not new information.

Evidence · text

> Indicated Primary Mineral Resource of 17.2 million ounces at 1.24 g/t Au \(432 million tonnes\)

#### Tags used in scoring

**Indicated Resource**

Polarity: positive

Definition: Reasonable geological confidence based on adequate drilling; continuity can be assumed. Basis for Probable Reserves.

Why it applies: category is "indicated"

**Cut-off Disclosed**

Polarity: positive

Definition: Cut-off grade used for resource reporting is clearly stated, enabling like-for-like comparison.

Why it applies: cutoff\_grade is stated

**Resource Update**

Polarity: neutral

Definition: Revised estimate for an existing resource — compare to prior to assess progress.

Why it applies: the release compares against a previous estimate

**PEA-Supporting**

Polarity: neutral

Definition: Resource estimate prepared to support a Preliminary Economic Assessment — early-stage study.

Why it applies: the release names the study this estimate supports

**PFS-Supporting**

Polarity: neutral

Definition: Resource estimate prepared to support a Pre-Feasibility Study — requires adequate M&I component.

Why it applies: the release names the study this estimate supports

**DFS-Supporting**

Polarity: neutral

Definition: Resource estimate prepared to support a Definitive Feasibility Study — requires high M&I confidence.

Why it applies: the release names the study this estimate supports

### inferred

[Link to this fact](https://atlas-staging.minestarters.com/news/freegold-drills-1-24-g-t-au-over-213m-including-21m-of-5-77-g-t-au-at-golden-sum--96849aa6-000c-45de-82e7-495c86653bda#fact-resource-facts-41)

Golden Summit · gold

Historical result

Needs review: historical\_restatement

#### Identity

- Project: Golden Summit
- Commodity: gold
- Region: usa\_ak
- Reported Region: Alaska
- Ticker: FVL

#### Resource scope

- Estimate type: resource
- Effective date: 2025-07-01T00:00:00.000Z
- Resource group id: resource:973152bc10892cd51c82
- Material type: Primary

#### Resource Data

- Category: inferred
- Tonnes: 358000000
- Grade: 1.04
- Grade Unit: g/t
- Contained Metal: 11.9
- Contained Unit: moz
- Cutoff Grade: 0.5
- Cutoff Unit: g/t

#### Prior Estimate

- Resource Date: 2025-07-01

#### Review

- Needs Review: Yes
- Review Reason: historical\_restatement
- Historical: Yes
- Historical Source Date: 2025-07-01T00:00:00.000Z

#### Dates

- Event date: 2026-10-15T00:00:00.000Z

Reasoning: This is a historical inferred primary resource with a very large tonnage and good gold grade, contributing significantly to the project's overall potential, but with lower confidence due to its category.

- Positive factor: Very large inferred primary resource tonnage with a good gold grade.

- Negative factor: Inferred category indicates lower geological confidence.

- Negative factor: Historical estimate, not new information.

Evidence · text

> Inferred Primary Mineral Resource of 11.9 million ounces at 1.04 g/t Au \(358 million tonnes\)

#### Tags used in scoring

**Cut-off Disclosed**

Polarity: positive

Definition: Cut-off grade used for resource reporting is clearly stated, enabling like-for-like comparison.

Why it applies: cutoff\_grade is stated

**Resource Update**

Polarity: neutral

Definition: Revised estimate for an existing resource — compare to prior to assess progress.

Why it applies: the release compares against a previous estimate

**PEA-Supporting**

Polarity: neutral

Definition: Resource estimate prepared to support a Preliminary Economic Assessment — early-stage study.

Why it applies: the release names the study this estimate supports

**PFS-Supporting**

Polarity: neutral

Definition: Resource estimate prepared to support a Pre-Feasibility Study — requires adequate M&I component.

Why it applies: the release names the study this estimate supports

**DFS-Supporting**

Polarity: neutral

Definition: Resource estimate prepared to support a Definitive Feasibility Study — requires high M&I confidence.

Why it applies: the release names the study this estimate supports

## How Atlas produces this analysis

Minestarters Atlas uses automated extraction to summarize mining announcements, identify reported measurements, and classify supporting evidence. Sentiment reflects the extracted narrative and classification rules; it is an interpretation, not a reported measurement. Evidence quotes and context are provided where available. Missing data, low-confidence results, and review flags indicate limitations. Check the original publisher announcement before relying on an interpretation.