Freegold drills 1.24 g/t Au over 213m including 21m of 5.77 g/t Au at Golden Summit
Original announcement by cnw on
- Company
- Freegold Limited
- Ticker
- FVL
- Exchange
- Unavailable
- Region
- Alaska
- Primary commodity
- Gold
- Secondary commodities
- None reported
- Document categories
- Drill results, Other, Metallurgy, Resource update
- Extracted
- 2026-10-15 11:50:07 UTC
Analysis by Minestarters Atlas
Atlas analysis published:
Minestarters Atlas analysis
Summary
Freegold Limited announced exceptional drill results from its Golden Summit project in Alaska, including 213 meters at 1.24 g/t gold, with a high-grade intercept of 21 meters at 5.77 g/t gold and a bonanza intercept of 3.0 meters at 32.7 g/t gold. These results confirm strong continuity of mineralization and are intended to define a focused starting point for a 2027 pre-feasibility study. The company also reported progress on geotechnical work, metallurgical testing, and baseline programs to support the PFS design and planning.
Reasoning: The drill results from Golden Summit are highly positive, featuring exceptional gold grades over significant widths, including bonanza intercepts. The program is strategically aligned with advancing a PFS, indicating clear development intent. While true widths are not determined, the overall continuity and high-grade nature of the intercepts are very material. The QA/QC disclosure adds credibility to the results.
Positive factors
- Exceptional gold grades, including bonanza intercepts, were reported.
- Long continuous mineralized intervals confirm strong continuity within the resource model.
- Drilling is specifically aimed at defining a focused starting point for a pre-feasibility study (PFS), indicating progress towards development.
- QA/QC procedures are disclosed, including certified lab and QP sign-off.
Negative factors
- True width cannot be determined due to uncertain geometry of mineralization, which may overstate apparent widths.
Low confidence — this extraction should be reviewed alongside the original source.
Facts used in scoring: 42
Classification and evidence
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: The release details the QA/QC program including laboratory, standards, and blanks, and is signed off by a Qualified Person.
Evidence · text
“The QA/QC program includes laboratory and field standards inserted every ten samples. Blanks are inserted at the start of each submittal, and at least one blank is inserted every 25 standards. Qualified Person and Disclosure Alvin Jackson, P.Geo., Vice President of Exploration and Development for Freegold, is the Qualified Person who has approved the scientific and technical disclosure in this release.”
Apparent Width Onlynegative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Why it applies: The document explicitly states that true width cannot be determined due to uncertain geometry of mineralization.
Evidence · text
“The widths refer to drill hole intercepts; true width cannot be determined due to the uncertain geometry of mineralization.”
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: The drill program includes infill holes in the Dolphin and Cleary areas, aimed at refining the geological model and increasing resource confidence for the PFS.
Evidence · text
“The eight drill holes in this release are from the ongoing 2026 program and include infill holes in the Dolphin and Cleary areas, as well as condemnation holes testing the margins of the known deposit.”
POX/BIOX Routeneutral
Pressure or bio-oxidation for refractory ore — high CAPEX and OPEX.
Why it applies: the document describes a pox_biox route ("POX")
Extracted facts
Stored fact records: 42. Some facts used in scoring do not have a stored record.
Drill Results (38)
GS2647Golden Summit · goldGrade: 0.98Grade Unit: g/tIntercept: 82.3 mView all detailsHide details
Identity
- Hole ID
- GS2647
- Project
- Golden Summit
- Commodity
- gold
- Region
- usa_ak
- Reported Region
- usa_ak
- Ticker
- FVL
Geometry
- Grade
- 0.98
- Grade Unit
- g/t
- Intercept
- 82.3 m
- From
- 136.2 m
- To
- 218.5 m
- Hole Depth
- 898.2 m
- Intercept Depth
- 136.2 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- GS2647:136.2-218.5
- Mining Method
- open_pit
Location
- Location
- Dolphin Area
- Easting
- 479001
- Northing
- 7215086
- Azimuth
- 360 °
- Dip
- -90 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-10-15T00:00:00.000Z
Reasoning: This intercept shows a moderate gold grade over a significant width, contributing to the overall resource continuity, but true width is not provided.
Positive factors
- Moderate gold grade over a significant width.
Negative factors
- True width not determined.
Evidence · table
“0.98”
Context: 82.3
Tags used in scoring
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
Rejected tags
Rejected tags — excluded from scoring because their label or evidence could not be verified.
Apparent Width OnlyRejected · negative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Reason: The document explicitly states that true width cannot be determined due to uncertain geometry of mineralization.
Evidence · text
“The widths refer to drill hole intercepts; true width cannot be determined due to the uncertain geometry of mineralization.”
QA/QC DisclosedRejected · positive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Reason: The release details the QA/QC program including laboratory, standards, and blanks, and is signed off by a Qualified Person.
Evidence · text
“The QA/QC program includes laboratory and field standards inserted every ten samples. Blanks are inserted at the start of each submittal, and at least one blank is inserted every 25 standards. Qualified Person and Disclosure Alvin Jackson, P.Geo., Vice President of Exploration and Development for Freegold, is the Qualified Person who has approved the scientific and technical disclosure in this release.”
GS2647Golden Summit · goldGrade: 0.86Grade Unit: g/tIntercept: 24.3 mView all detailsHide details
Identity
- Hole ID
- GS2647
- Project
- Golden Summit
- Commodity
- gold
- Region
- usa_ak
- Reported Region
- usa_ak
- Ticker
- FVL
Geometry
- Grade
- 0.86
- Grade Unit
- g/t
- Intercept
- 24.3 m
- From
- 242.9 m
- To
- 267.2 m
- Hole Depth
- 898.2 m
- Intercept Depth
- 136.2 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- GS2647:242.9-267.2
- Mining Method
- open_pit
Location
- Location
- Dolphin Area
- Easting
- 479001
- Northing
- 7215086
- Azimuth
- 360 °
- Dip
- -90 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-10-15T00:00:00.000Z
Reasoning: This intercept shows a moderate gold grade over a good width, contributing to the overall resource continuity, but true width is not provided.
Positive factors
- Moderate gold grade over a good width.
Negative factors
- True width not determined.
Evidence · table
“0.86”
Context: 24.3
Tags used in scoring
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
Rejected tags
Rejected tags — excluded from scoring because their label or evidence could not be verified.
Apparent Width OnlyRejected · negative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Reason: The document explicitly states that true width cannot be determined due to uncertain geometry of mineralization.
Evidence · text
“The widths refer to drill hole intercepts; true width cannot be determined due to the uncertain geometry of mineralization.”
QA/QC DisclosedRejected · positive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Reason: The release details the QA/QC program including laboratory, standards, and blanks, and is signed off by a Qualified Person.
Evidence · text
“The QA/QC program includes laboratory and field standards inserted every ten samples. Blanks are inserted at the start of each submittal, and at least one blank is inserted every 25 standards. Qualified Person and Disclosure Alvin Jackson, P.Geo., Vice President of Exploration and Development for Freegold, is the Qualified Person who has approved the scientific and technical disclosure in this release.”
GS2647Golden Summit · goldGrade: 0.73Grade Unit: g/tIntercept: 375 mView all detailsHide details
Identity
- Hole ID
- GS2647
- Project
- Golden Summit
- Commodity
- gold
- Region
- usa_ak
- Reported Region
- usa_ak
- Ticker
- FVL
Geometry
- Grade
- 0.73
- Grade Unit
- g/t
- Intercept
- 375 m
- From
- 367.8 m
- To
- 742.8 m
- Hole Depth
- 898.2 m
- Intercept Depth
- 136.2 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- GS2647:367.8-742.8
- Mining Method
- open_pit
Location
- Location
- Dolphin Area
- Easting
- 479001
- Northing
- 7215086
- Azimuth
- 360 °
- Dip
- -90 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-10-15T00:00:00.000Z
Reasoning: This very long intercept, despite a moderate grade, demonstrates significant mineralization continuity and a strong GT product, which is highly material for resource definition.
Positive factors
- Long continuous intercept with moderate gold grade, indicating broad mineralization.
- High GT product (273.75 g/t·m) is strong.
Negative factors
- True width not determined.
Evidence · table
“0.73”
Context: 375
Tags used in scoring
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
Rejected tags
Rejected tags — excluded from scoring because their label or evidence could not be verified.
Apparent Width OnlyRejected · negative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Reason: The document explicitly states that true width cannot be determined due to uncertain geometry of mineralization.
Evidence · text
“The widths refer to drill hole intercepts; true width cannot be determined due to the uncertain geometry of mineralization.”
QA/QC DisclosedRejected · positive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Reason: The release details the QA/QC program including laboratory, standards, and blanks, and is signed off by a Qualified Person.
Evidence · text
“The QA/QC program includes laboratory and field standards inserted every ten samples. Blanks are inserted at the start of each submittal, and at least one blank is inserted every 25 standards. Qualified Person and Disclosure Alvin Jackson, P.Geo., Vice President of Exploration and Development for Freegold, is the Qualified Person who has approved the scientific and technical disclosure in this release.”
GS2647Golden Summit · goldGrade: 0.84Grade Unit: g/tIntercept: 37.8 mView all detailsHide details
Identity
- Hole ID
- GS2647
- Project
- Golden Summit
- Commodity
- gold
- Region
- usa_ak
- Reported Region
- usa_ak
- Ticker
- FVL
Geometry
- Grade
- 0.84
- Grade Unit
- g/t
- Intercept
- 37.8 m
- From
- 388 m
- To
- 425.8 m
- Hole Depth
- 898.2 m
- Intercept Depth
- 136.2 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- GS2647:388-425.8
- Mining Method
- open_pit
Location
- Location
- Dolphin Area
- Easting
- 479001
- Northing
- 7215086
- Azimuth
- 360 °
- Dip
- -90 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-10-15T00:00:00.000Z
Reasoning: This inclusion within a larger interval shows consistent moderate gold grades over a good width, supporting the overall continuity.
Positive factors
- Moderate gold grade over a good width, contributing to the broader mineralized zone.
Negative factors
- True width not determined.
Evidence · table
“0.84”
Context: 37.8
Tags used in scoring
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
Rejected tags
Rejected tags — excluded from scoring because their label or evidence could not be verified.
Apparent Width OnlyRejected · negative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Reason: The document explicitly states that true width cannot be determined due to uncertain geometry of mineralization.
Evidence · text
“The widths refer to drill hole intercepts; true width cannot be determined due to the uncertain geometry of mineralization.”
QA/QC DisclosedRejected · positive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Reason: The release details the QA/QC program including laboratory, standards, and blanks, and is signed off by a Qualified Person.
Evidence · text
“The QA/QC program includes laboratory and field standards inserted every ten samples. Blanks are inserted at the start of each submittal, and at least one blank is inserted every 25 standards. Qualified Person and Disclosure Alvin Jackson, P.Geo., Vice President of Exploration and Development for Freegold, is the Qualified Person who has approved the scientific and technical disclosure in this release.”
GS2647Golden Summit · goldGrade: 0.84Grade Unit: g/tIntercept: 112.8 mView all detailsHide details
Identity
- Hole ID
- GS2647
- Project
- Golden Summit
- Commodity
- gold
- Region
- usa_ak
- Reported Region
- usa_ak
- Ticker
- FVL
Geometry
- Grade
- 0.84
- Grade Unit
- g/t
- Intercept
- 112.8 m
- From
- 447.1 m
- To
- 559.9 m
- Hole Depth
- 898.2 m
- Intercept Depth
- 136.2 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- GS2647:447.1-559.9
- Mining Method
- open_pit
Location
- Location
- Dolphin Area
- Easting
- 479001
- Northing
- 7215086
- Azimuth
- 360 °
- Dip
- -90 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-10-15T00:00:00.000Z
Reasoning: This long inclusion within a broader interval demonstrates significant mineralization continuity and a strong GT product, which is highly material for resource definition.
Positive factors
- Long continuous intercept with moderate gold grade, indicating broad mineralization.
- High GT product (94.75 g/t·m) is strong.
Negative factors
- True width not determined.
Evidence · table
“0.84”
Context: 112.8
Tags used in scoring
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
Rejected tags
Rejected tags — excluded from scoring because their label or evidence could not be verified.
Apparent Width OnlyRejected · negative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Reason: The document explicitly states that true width cannot be determined due to uncertain geometry of mineralization.
Evidence · text
“The widths refer to drill hole intercepts; true width cannot be determined due to the uncertain geometry of mineralization.”
QA/QC DisclosedRejected · positive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Reason: The release details the QA/QC program including laboratory, standards, and blanks, and is signed off by a Qualified Person.
Evidence · text
“The QA/QC program includes laboratory and field standards inserted every ten samples. Blanks are inserted at the start of each submittal, and at least one blank is inserted every 25 standards. Qualified Person and Disclosure Alvin Jackson, P.Geo., Vice President of Exploration and Development for Freegold, is the Qualified Person who has approved the scientific and technical disclosure in this release.”
GS2647Golden Summit · goldGrade: 0.97Grade Unit: g/tIntercept: 45.7 mView all detailsHide details
Identity
- Hole ID
- GS2647
- Project
- Golden Summit
- Commodity
- gold
- Region
- usa_ak
- Reported Region
- usa_ak
- Ticker
- FVL
Geometry
- Grade
- 0.97
- Grade Unit
- g/t
- Intercept
- 45.7 m
- From
- 474.6 m
- To
- 520.3 m
- Hole Depth
- 898.2 m
- Intercept Depth
- 136.2 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- GS2647:474.6-520.3
- Mining Method
- open_pit
Location
- Location
- Dolphin Area
- Easting
- 479001
- Northing
- 7215086
- Azimuth
- 360 °
- Dip
- -90 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-10-15T00:00:00.000Z
Reasoning: This inclusion within a larger interval shows consistent moderate gold grades over a significant width, supporting the overall continuity.
Positive factors
- Moderate gold grade over a significant width, contributing to the broader mineralized zone.
Negative factors
- True width not determined.
Evidence · table
“0.97”
Context: 45.7
Tags used in scoring
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
Rejected tags
Rejected tags — excluded from scoring because their label or evidence could not be verified.
Apparent Width OnlyRejected · negative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Reason: The document explicitly states that true width cannot be determined due to uncertain geometry of mineralization.
Evidence · text
“The widths refer to drill hole intercepts; true width cannot be determined due to the uncertain geometry of mineralization.”
QA/QC DisclosedRejected · positive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Reason: The release details the QA/QC program including laboratory, standards, and blanks, and is signed off by a Qualified Person.
Evidence · text
“The QA/QC program includes laboratory and field standards inserted every ten samples. Blanks are inserted at the start of each submittal, and at least one blank is inserted every 25 standards. Qualified Person and Disclosure Alvin Jackson, P.Geo., Vice President of Exploration and Development for Freegold, is the Qualified Person who has approved the scientific and technical disclosure in this release.”
GS2647Golden Summit · goldGrade: 0.83Grade Unit: g/tIntercept: 27.4 mView all detailsHide details
Identity
- Hole ID
- GS2647
- Project
- Golden Summit
- Commodity
- gold
- Region
- usa_ak
- Reported Region
- usa_ak
- Ticker
- FVL
Geometry
- Grade
- 0.83
- Grade Unit
- g/t
- Intercept
- 27.4 m
- From
- 633.1 m
- To
- 660.5 m
- Hole Depth
- 898.2 m
- Intercept Depth
- 136.2 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- GS2647:633.1-660.5
- Mining Method
- open_pit
Location
- Location
- Dolphin Area
- Easting
- 479001
- Northing
- 7215086
- Azimuth
- 360 °
- Dip
- -90 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-10-15T00:00:00.000Z
Reasoning: This inclusion within a larger interval shows consistent moderate gold grades over a good width, supporting the overall continuity.
Positive factors
- Moderate gold grade over a good width, contributing to the broader mineralized zone.
Negative factors
- True width not determined.
Evidence · table
“0.83”
Context: 27.4
Tags used in scoring
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
Rejected tags
Rejected tags — excluded from scoring because their label or evidence could not be verified.
Apparent Width OnlyRejected · negative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Reason: The document explicitly states that true width cannot be determined due to uncertain geometry of mineralization.
Evidence · text
“The widths refer to drill hole intercepts; true width cannot be determined due to the uncertain geometry of mineralization.”
QA/QC DisclosedRejected · positive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Reason: The release details the QA/QC program including laboratory, standards, and blanks, and is signed off by a Qualified Person.
Evidence · text
“The QA/QC program includes laboratory and field standards inserted every ten samples. Blanks are inserted at the start of each submittal, and at least one blank is inserted every 25 standards. Qualified Person and Disclosure Alvin Jackson, P.Geo., Vice President of Exploration and Development for Freegold, is the Qualified Person who has approved the scientific and technical disclosure in this release.”
GS2647Golden Summit · goldGrade: 1.02Grade Unit: g/tIntercept: 33.5 mView all detailsHide details
Identity
- Hole ID
- GS2647
- Project
- Golden Summit
- Commodity
- gold
- Region
- usa_ak
- Reported Region
- usa_ak
- Ticker
- FVL
Geometry
- Grade
- 1.02
- Grade Unit
- g/t
- Intercept
- 33.5 m
- From
- 709.3 m
- To
- 742.8 m
- Hole Depth
- 898.2 m
- Intercept Depth
- 136.2 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- GS2647:709.3-742.8
- Mining Method
- open_pit
Location
- Location
- Dolphin Area
- Easting
- 479001
- Northing
- 7215086
- Azimuth
- 360 °
- Dip
- -90 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-10-15T00:00:00.000Z
Reasoning: This inclusion within a larger interval shows consistent moderate gold grades over a significant width, supporting the overall continuity.
Positive factors
- Moderate gold grade over a significant width, contributing to the broader mineralized zone.
Negative factors
- True width not determined.
Evidence · table
“1.02”
Context: 33.5
Tags used in scoring
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
Rejected tags
Rejected tags — excluded from scoring because their label or evidence could not be verified.
Apparent Width OnlyRejected · negative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Reason: The document explicitly states that true width cannot be determined due to uncertain geometry of mineralization.
Evidence · text
“The widths refer to drill hole intercepts; true width cannot be determined due to the uncertain geometry of mineralization.”
QA/QC DisclosedRejected · positive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Reason: The release details the QA/QC program including laboratory, standards, and blanks, and is signed off by a Qualified Person.
Evidence · text
“The QA/QC program includes laboratory and field standards inserted every ten samples. Blanks are inserted at the start of each submittal, and at least one blank is inserted every 25 standards. Qualified Person and Disclosure Alvin Jackson, P.Geo., Vice President of Exploration and Development for Freegold, is the Qualified Person who has approved the scientific and technical disclosure in this release.”
GS2648Golden Summit · goldGrade: 1.67Grade Unit: g/tIntercept: 30.5 mView all detailsHide details
Identity
- Hole ID
- GS2648
- Project
- Golden Summit
- Commodity
- gold
- Region
- usa_ak
- Reported Region
- usa_ak
- Ticker
- FVL
Geometry
- Grade
- 1.67
- Grade Unit
- g/t
- Intercept
- 30.5 m
- From
- 63.1 m
- To
- 93.6 m
- Hole Depth
- 630 m
- Intercept Depth
- 63.1 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- GS2648:63.1-93.6
- Mining Method
- open_pit
Location
- Location
- Dolphin Area
- Easting
- 479358
- Northing
- 7215450
- Azimuth
- 360 °
- Dip
- -90 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-10-15T00:00:00.000Z
Reasoning: This near-surface intercept with a strong gold grade and GT product is highly material for potential early-stage mining, despite the lack of true width.
Positive factors
- Strong gold grade over a significant width, supporting starter pit optimization studies.
- GT product (50.935 g/t·m) is strong.
Negative factors
- True width not determined.
Evidence · table
“1.67”
Context: 30.5
Tags used in scoring
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
Rejected tags
Rejected tags — excluded from scoring because their label or evidence could not be verified.
Apparent Width OnlyRejected · negative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Reason: The document explicitly states that true width cannot be determined due to uncertain geometry of mineralization.
Evidence · text
“The widths refer to drill hole intercepts; true width cannot be determined due to the uncertain geometry of mineralization.”
QA/QC DisclosedRejected · positive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Reason: The release details the QA/QC program including laboratory, standards, and blanks, and is signed off by a Qualified Person.
Evidence · text
“The QA/QC program includes laboratory and field standards inserted every ten samples. Blanks are inserted at the start of each submittal, and at least one blank is inserted every 25 standards. Qualified Person and Disclosure Alvin Jackson, P.Geo., Vice President of Exploration and Development for Freegold, is the Qualified Person who has approved the scientific and technical disclosure in this release.”
GS2648Golden Summit · goldGrade: 2.47Grade Unit: g/tIntercept: 18 mView all detailsHide details
Identity
- Hole ID
- GS2648
- Project
- Golden Summit
- Commodity
- gold
- Region
- usa_ak
- Reported Region
- usa_ak
- Ticker
- FVL
Geometry
- Grade
- 2.47
- Grade Unit
- g/t
- Intercept
- 18 m
- From
- 63.1 m
- To
- 81.1 m
- Hole Depth
- 630 m
- Intercept Depth
- 63.1 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- GS2648:63.1-81.1
- Mining Method
- open_pit
Location
- Location
- Dolphin Area
- Easting
- 479358
- Northing
- 7215450
- Azimuth
- 360 °
- Dip
- -90 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-10-15T00:00:00.000Z
Reasoning: This high-grade inclusion within a broader near-surface intercept is very material, supporting potential early-stage mining.
Positive factors
- Strong gold grade over a good width, enhancing the broader mineralized zone.
- GT product (44.46 g/t·m) is strong.
Negative factors
- True width not determined.
Evidence · table
“2.47”
Context: 18
Tags used in scoring
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
Rejected tags
Rejected tags — excluded from scoring because their label or evidence could not be verified.
Apparent Width OnlyRejected · negative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Reason: The document explicitly states that true width cannot be determined due to uncertain geometry of mineralization.
Evidence · text
“The widths refer to drill hole intercepts; true width cannot be determined due to the uncertain geometry of mineralization.”
QA/QC DisclosedRejected · positive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Reason: The release details the QA/QC program including laboratory, standards, and blanks, and is signed off by a Qualified Person.
Evidence · text
“The QA/QC program includes laboratory and field standards inserted every ten samples. Blanks are inserted at the start of each submittal, and at least one blank is inserted every 25 standards. Qualified Person and Disclosure Alvin Jackson, P.Geo., Vice President of Exploration and Development for Freegold, is the Qualified Person who has approved the scientific and technical disclosure in this release.”
GS2648Golden Summit · goldGrade: 2.09Grade Unit: g/tIntercept: 5.1 mView all detailsHide details
Identity
- Hole ID
- GS2648
- Project
- Golden Summit
- Commodity
- gold
- Region
- usa_ak
- Reported Region
- usa_ak
- Ticker
- FVL
Geometry
- Grade
- 2.09
- Grade Unit
- g/t
- Intercept
- 5.1 m
- From
- 118 m
- To
- 123.1 m
- Hole Depth
- 630 m
- Intercept Depth
- 63.1 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- GS2648:118-123.1
- Mining Method
- open_pit
Location
- Location
- Dolphin Area
- Easting
- 479358
- Northing
- 7215450
- Azimuth
- 360 °
- Dip
- -90 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-10-15T00:00:00.000Z
Reasoning: This intercept shows a strong gold grade over a moderate width, contributing positively to the overall mineralization.
Positive factors
- Strong gold grade over a moderate width.
Negative factors
- True width not determined.
Evidence · table
“2.09”
Context: 5.1
Tags used in scoring
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
Rejected tags
Rejected tags — excluded from scoring because their label or evidence could not be verified.
Apparent Width OnlyRejected · negative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Reason: The document explicitly states that true width cannot be determined due to uncertain geometry of mineralization.
Evidence · text
“The widths refer to drill hole intercepts; true width cannot be determined due to the uncertain geometry of mineralization.”
QA/QC DisclosedRejected · positive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Reason: The release details the QA/QC program including laboratory, standards, and blanks, and is signed off by a Qualified Person.
Evidence · text
“The QA/QC program includes laboratory and field standards inserted every ten samples. Blanks are inserted at the start of each submittal, and at least one blank is inserted every 25 standards. Qualified Person and Disclosure Alvin Jackson, P.Geo., Vice President of Exploration and Development for Freegold, is the Qualified Person who has approved the scientific and technical disclosure in this release.”
GS2648Golden Summit · goldGrade: 0.68Grade Unit: g/tIntercept: 18.6 mView all detailsHide details
Identity
- Hole ID
- GS2648
- Project
- Golden Summit
- Commodity
- gold
- Region
- usa_ak
- Reported Region
- usa_ak
- Ticker
- FVL
Geometry
- Grade
- 0.68
- Grade Unit
- g/t
- Intercept
- 18.6 m
- From
- 163.4 m
- To
- 182 m
- Hole Depth
- 630 m
- Intercept Depth
- 63.1 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- GS2648:163.4-182
- Mining Method
- open_pit
Location
- Location
- Dolphin Area
- Easting
- 479358
- Northing
- 7215450
- Azimuth
- 360 °
- Dip
- -90 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-10-15T00:00:00.000Z
Reasoning: This intercept shows a moderate gold grade over a good width, contributing to the overall mineralization.
Positive factors
- Moderate gold grade over a good width.
Negative factors
- True width not determined.
Evidence · table
“0.68”
Context: 18.6
Tags used in scoring
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
Rejected tags
Rejected tags — excluded from scoring because their label or evidence could not be verified.
Apparent Width OnlyRejected · negative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Reason: The document explicitly states that true width cannot be determined due to uncertain geometry of mineralization.
Evidence · text
“The widths refer to drill hole intercepts; true width cannot be determined due to the uncertain geometry of mineralization.”
QA/QC DisclosedRejected · positive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Reason: The release details the QA/QC program including laboratory, standards, and blanks, and is signed off by a Qualified Person.
Evidence · text
“The QA/QC program includes laboratory and field standards inserted every ten samples. Blanks are inserted at the start of each submittal, and at least one blank is inserted every 25 standards. Qualified Person and Disclosure Alvin Jackson, P.Geo., Vice President of Exploration and Development for Freegold, is the Qualified Person who has approved the scientific and technical disclosure in this release.”
GS2648Golden Summit · goldGrade: 0.82Grade Unit: g/tIntercept: 18.1 mView all detailsHide details
Identity
- Hole ID
- GS2648
- Project
- Golden Summit
- Commodity
- gold
- Region
- usa_ak
- Reported Region
- usa_ak
- Ticker
- FVL
Geometry
- Grade
- 0.82
- Grade Unit
- g/t
- Intercept
- 18.1 m
- From
- 227.7 m
- To
- 245.8 m
- Hole Depth
- 630 m
- Intercept Depth
- 63.1 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- GS2648:227.7-245.8
- Mining Method
- open_pit
Location
- Location
- Dolphin Area
- Easting
- 479358
- Northing
- 7215450
- Azimuth
- 360 °
- Dip
- -90 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-10-15T00:00:00.000Z
Reasoning: This intercept shows a moderate gold grade over a good width, contributing to the overall mineralization.
Positive factors
- Moderate gold grade over a good width.
Negative factors
- True width not determined.
Evidence · table
“0.82”
Context: 18.1
Tags used in scoring
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
Rejected tags
Rejected tags — excluded from scoring because their label or evidence could not be verified.
Apparent Width OnlyRejected · negative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Reason: The document explicitly states that true width cannot be determined due to uncertain geometry of mineralization.
Evidence · text
“The widths refer to drill hole intercepts; true width cannot be determined due to the uncertain geometry of mineralization.”
QA/QC DisclosedRejected · positive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Reason: The release details the QA/QC program including laboratory, standards, and blanks, and is signed off by a Qualified Person.
Evidence · text
“The QA/QC program includes laboratory and field standards inserted every ten samples. Blanks are inserted at the start of each submittal, and at least one blank is inserted every 25 standards. Qualified Person and Disclosure Alvin Jackson, P.Geo., Vice President of Exploration and Development for Freegold, is the Qualified Person who has approved the scientific and technical disclosure in this release.”
GS2648Golden Summit · goldGrade: 0.74Grade Unit: g/tIntercept: 10.5 mView all detailsHide details
Identity
- Hole ID
- GS2648
- Project
- Golden Summit
- Commodity
- gold
- Region
- usa_ak
- Reported Region
- usa_ak
- Ticker
- FVL
Geometry
- Grade
- 0.74
- Grade Unit
- g/t
- Intercept
- 10.5 m
- From
- 296.4 m
- To
- 306.9 m
- Hole Depth
- 630 m
- Intercept Depth
- 63.1 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- GS2648:296.4-306.9
- Mining Method
- open_pit
Location
- Location
- Dolphin Area
- Easting
- 479358
- Northing
- 7215450
- Azimuth
- 360 °
- Dip
- -90 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-10-15T00:00:00.000Z
Reasoning: This intercept shows a moderate gold grade over a good width, contributing to the overall mineralization.
Positive factors
- Moderate gold grade over a good width.
Negative factors
- True width not determined.
Evidence · table
“0.74”
Context: 10.5
Tags used in scoring
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
Rejected tags
Rejected tags — excluded from scoring because their label or evidence could not be verified.
Apparent Width OnlyRejected · negative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Reason: The document explicitly states that true width cannot be determined due to uncertain geometry of mineralization.
Evidence · text
“The widths refer to drill hole intercepts; true width cannot be determined due to the uncertain geometry of mineralization.”
QA/QC DisclosedRejected · positive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Reason: The release details the QA/QC program including laboratory, standards, and blanks, and is signed off by a Qualified Person.
Evidence · text
“The QA/QC program includes laboratory and field standards inserted every ten samples. Blanks are inserted at the start of each submittal, and at least one blank is inserted every 25 standards. Qualified Person and Disclosure Alvin Jackson, P.Geo., Vice President of Exploration and Development for Freegold, is the Qualified Person who has approved the scientific and technical disclosure in this release.”
GS2648Golden Summit · goldGrade: 0.89Grade Unit: g/tIntercept: 149.7 mView all detailsHide details
Identity
- Hole ID
- GS2648
- Project
- Golden Summit
- Commodity
- gold
- Region
- usa_ak
- Reported Region
- usa_ak
- Ticker
- FVL
Geometry
- Grade
- 0.89
- Grade Unit
- g/t
- Intercept
- 149.7 m
- From
- 343.2 m
- To
- 492.9 m
- Hole Depth
- 630 m
- Intercept Depth
- 63.1 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- GS2648:343.2-492.9
- Mining Method
- open_pit
Location
- Location
- Dolphin Area
- Easting
- 479358
- Northing
- 7215450
- Azimuth
- 360 °
- Dip
- -90 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-10-15T00:00:00.000Z
Reasoning: This very long intercept, despite a moderate grade, demonstrates significant mineralization continuity and a strong GT product, which is highly material for resource definition.
Positive factors
- Long continuous intercept with moderate gold grade, indicating broad mineralization.
- High GT product (133.233 g/t·m) is strong.
Negative factors
- True width not determined.
Evidence · table
“0.89”
Context: 149.7
Tags used in scoring
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
Rejected tags
Rejected tags — excluded from scoring because their label or evidence could not be verified.
Apparent Width OnlyRejected · negative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Reason: The document explicitly states that true width cannot be determined due to uncertain geometry of mineralization.
Evidence · text
“The widths refer to drill hole intercepts; true width cannot be determined due to the uncertain geometry of mineralization.”
QA/QC DisclosedRejected · positive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Reason: The release details the QA/QC program including laboratory, standards, and blanks, and is signed off by a Qualified Person.
Evidence · text
“The QA/QC program includes laboratory and field standards inserted every ten samples. Blanks are inserted at the start of each submittal, and at least one blank is inserted every 25 standards. Qualified Person and Disclosure Alvin Jackson, P.Geo., Vice President of Exploration and Development for Freegold, is the Qualified Person who has approved the scientific and technical disclosure in this release.”
GS2648Golden Summit · goldGrade: 1.11Grade Unit: g/tIntercept: 79.3 mView all detailsHide details
Identity
- Hole ID
- GS2648
- Project
- Golden Summit
- Commodity
- gold
- Region
- usa_ak
- Reported Region
- usa_ak
- Ticker
- FVL
Geometry
- Grade
- 1.11
- Grade Unit
- g/t
- Intercept
- 79.3 m
- From
- 377 m
- To
- 456.3 m
- Hole Depth
- 630 m
- Intercept Depth
- 63.1 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- GS2648:377-456.3
- Mining Method
- open_pit
Location
- Location
- Dolphin Area
- Easting
- 479358
- Northing
- 7215450
- Azimuth
- 360 °
- Dip
- -90 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-10-15T00:00:00.000Z
Reasoning: This long inclusion within a broader interval demonstrates significant mineralization continuity and a strong GT product, which is highly material for resource definition.
Positive factors
- Long continuous intercept with moderate gold grade, indicating broad mineralization.
- High GT product (88.023 g/t·m) is strong.
Negative factors
- True width not determined.
Evidence · table
“1.11”
Context: 79.3
Tags used in scoring
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
Rejected tags
Rejected tags — excluded from scoring because their label or evidence could not be verified.
Apparent Width OnlyRejected · negative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Reason: The document explicitly states that true width cannot be determined due to uncertain geometry of mineralization.
Evidence · text
“The widths refer to drill hole intercepts; true width cannot be determined due to the uncertain geometry of mineralization.”
QA/QC DisclosedRejected · positive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Reason: The release details the QA/QC program including laboratory, standards, and blanks, and is signed off by a Qualified Person.
Evidence · text
“The QA/QC program includes laboratory and field standards inserted every ten samples. Blanks are inserted at the start of each submittal, and at least one blank is inserted every 25 standards. Qualified Person and Disclosure Alvin Jackson, P.Geo., Vice President of Exploration and Development for Freegold, is the Qualified Person who has approved the scientific and technical disclosure in this release.”
GS2656Golden Summit · goldGrade: 1.89Grade Unit: g/tIntercept: 5.9 mView all detailsHide details
Identity
- Hole ID
- GS2656
- Project
- Golden Summit
- Commodity
- gold
- Region
- usa_ak
- Reported Region
- usa_ak
- Ticker
- FVL
Geometry
- Grade
- 1.89
- Grade Unit
- g/t
- Intercept
- 5.9 m
- From
- 111.1 m
- To
- 117 m
- Hole Depth
- 758 m
- Intercept Depth
- 111.1 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- GS2656:111.1-117
- Mining Method
- open_pit
Location
- Location
- Dolphin Area
- Easting
- 478898
- Northing
- 7215339
- Azimuth
- 360 °
- Dip
- -90 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-10-15T00:00:00.000Z
Reasoning: This intercept shows a moderate gold grade over a narrow width, contributing to the overall mineralization.
Positive factors
- Moderate gold grade over a narrow width.
Negative factors
- True width not determined.
Evidence · table
“1.89”
Context: 5.9
Tags used in scoring
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
Rejected tags
Rejected tags — excluded from scoring because their label or evidence could not be verified.
Apparent Width OnlyRejected · negative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Reason: The document explicitly states that true width cannot be determined due to uncertain geometry of mineralization.
Evidence · text
“The widths refer to drill hole intercepts; true width cannot be determined due to the uncertain geometry of mineralization.”
QA/QC DisclosedRejected · positive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Reason: The release details the QA/QC program including laboratory, standards, and blanks, and is signed off by a Qualified Person.
Evidence · text
“The QA/QC program includes laboratory and field standards inserted every ten samples. Blanks are inserted at the start of each submittal, and at least one blank is inserted every 25 standards. Qualified Person and Disclosure Alvin Jackson, P.Geo., Vice President of Exploration and Development for Freegold, is the Qualified Person who has approved the scientific and technical disclosure in this release.”
GS2656Golden Summit · goldGrade: 1.88Grade Unit: g/tIntercept: 3.5 mView all detailsHide details
Identity
- Hole ID
- GS2656
- Project
- Golden Summit
- Commodity
- gold
- Region
- usa_ak
- Reported Region
- usa_ak
- Ticker
- FVL
Geometry
- Grade
- 1.88
- Grade Unit
- g/t
- Intercept
- 3.5 m
- From
- 139 m
- To
- 142.5 m
- Hole Depth
- 758 m
- Intercept Depth
- 111.1 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- GS2656:139-142.5
- Mining Method
- open_pit
Location
- Location
- Dolphin Area
- Easting
- 478898
- Northing
- 7215339
- Azimuth
- 360 °
- Dip
- -90 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-10-15T00:00:00.000Z
Reasoning: This intercept shows a moderate gold grade over a narrow width, contributing to the overall mineralization.
Positive factors
- Moderate gold grade over a narrow width.
Negative factors
- True width not determined.
Evidence · table
“1.88”
Context: 3.5
Tags used in scoring
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
Rejected tags
Rejected tags — excluded from scoring because their label or evidence could not be verified.
Apparent Width OnlyRejected · negative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Reason: The document explicitly states that true width cannot be determined due to uncertain geometry of mineralization.
Evidence · text
“The widths refer to drill hole intercepts; true width cannot be determined due to the uncertain geometry of mineralization.”
QA/QC DisclosedRejected · positive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Reason: The release details the QA/QC program including laboratory, standards, and blanks, and is signed off by a Qualified Person.
Evidence · text
“The QA/QC program includes laboratory and field standards inserted every ten samples. Blanks are inserted at the start of each submittal, and at least one blank is inserted every 25 standards. Qualified Person and Disclosure Alvin Jackson, P.Geo., Vice President of Exploration and Development for Freegold, is the Qualified Person who has approved the scientific and technical disclosure in this release.”
GS2656Golden Summit · goldGrade: 1.23Grade Unit: g/tIntercept: 19.6 mView all detailsHide details
Identity
- Hole ID
- GS2656
- Project
- Golden Summit
- Commodity
- gold
- Region
- usa_ak
- Reported Region
- usa_ak
- Ticker
- FVL
Geometry
- Grade
- 1.23
- Grade Unit
- g/t
- Intercept
- 19.6 m
- From
- 203 m
- To
- 222.6 m
- Hole Depth
- 758 m
- Intercept Depth
- 111.1 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- GS2656:203-222.6
- Mining Method
- open_pit
Location
- Location
- Dolphin Area
- Easting
- 478898
- Northing
- 7215339
- Azimuth
- 360 °
- Dip
- -90 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-10-15T00:00:00.000Z
Reasoning: This intercept shows a moderate gold grade over a good width, contributing to the overall mineralization.
Positive factors
- Moderate gold grade over a good width.
Negative factors
- True width not determined.
Evidence · table
“1.23”
Context: 19.6
Tags used in scoring
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
Rejected tags
Rejected tags — excluded from scoring because their label or evidence could not be verified.
Apparent Width OnlyRejected · negative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Reason: The document explicitly states that true width cannot be determined due to uncertain geometry of mineralization.
Evidence · text
“The widths refer to drill hole intercepts; true width cannot be determined due to the uncertain geometry of mineralization.”
QA/QC DisclosedRejected · positive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Reason: The release details the QA/QC program including laboratory, standards, and blanks, and is signed off by a Qualified Person.
Evidence · text
“The QA/QC program includes laboratory and field standards inserted every ten samples. Blanks are inserted at the start of each submittal, and at least one blank is inserted every 25 standards. Qualified Person and Disclosure Alvin Jackson, P.Geo., Vice President of Exploration and Development for Freegold, is the Qualified Person who has approved the scientific and technical disclosure in this release.”
GS2656Golden Summit · goldGrade: 0.79Grade Unit: g/tIntercept: 70.3 mView all detailsHide details
Identity
- Hole ID
- GS2656
- Project
- Golden Summit
- Commodity
- gold
- Region
- usa_ak
- Reported Region
- usa_ak
- Ticker
- FVL
Geometry
- Grade
- 0.79
- Grade Unit
- g/t
- Intercept
- 70.3 m
- From
- 236 m
- To
- 306.3 m
- Hole Depth
- 758 m
- Intercept Depth
- 111.1 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- GS2656:236-306.3
- Mining Method
- open_pit
Location
- Location
- Dolphin Area
- Easting
- 478898
- Northing
- 7215339
- Azimuth
- 360 °
- Dip
- -90 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-10-15T00:00:00.000Z
Reasoning: This long intercept, despite a moderate grade, demonstrates significant mineralization continuity and a strong GT product, which is highly material for resource definition.
Positive factors
- Long continuous intercept with moderate gold grade, indicating broad mineralization.
- High GT product (55.537 g/t·m) is strong.
Negative factors
- True width not determined.
Evidence · table
“0.79”
Context: 70.3
Tags used in scoring
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
Rejected tags
Rejected tags — excluded from scoring because their label or evidence could not be verified.
Apparent Width OnlyRejected · negative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Reason: The document explicitly states that true width cannot be determined due to uncertain geometry of mineralization.
Evidence · text
“The widths refer to drill hole intercepts; true width cannot be determined due to the uncertain geometry of mineralization.”
QA/QC DisclosedRejected · positive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Reason: The release details the QA/QC program including laboratory, standards, and blanks, and is signed off by a Qualified Person.
Evidence · text
“The QA/QC program includes laboratory and field standards inserted every ten samples. Blanks are inserted at the start of each submittal, and at least one blank is inserted every 25 standards. Qualified Person and Disclosure Alvin Jackson, P.Geo., Vice President of Exploration and Development for Freegold, is the Qualified Person who has approved the scientific and technical disclosure in this release.”
GS2656Golden Summit · goldGrade: 2.85Grade Unit: g/tIntercept: 6 mView all detailsHide details
Identity
- Hole ID
- GS2656
- Project
- Golden Summit
- Commodity
- gold
- Region
- usa_ak
- Reported Region
- usa_ak
- Ticker
- FVL
Geometry
- Grade
- 2.85
- Grade Unit
- g/t
- Intercept
- 6 m
- From
- 236 m
- To
- 242 m
- Hole Depth
- 758 m
- Intercept Depth
- 111.1 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- GS2656:236-242
- Mining Method
- open_pit
Location
- Location
- Dolphin Area
- Easting
- 478898
- Northing
- 7215339
- Azimuth
- 360 °
- Dip
- -90 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-10-15T00:00:00.000Z
Reasoning: This high-grade inclusion within a broader intercept is material, contributing positively to the overall mineralization.
Positive factors
- Strong gold grade over a good width, enhancing the broader mineralized zone.
- GT product (17.1 g/t·m) is moderate.
Negative factors
- True width not determined.
Evidence · table
“2.85”
Context: 6.0
Tags used in scoring
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
Rejected tags
Rejected tags — excluded from scoring because their label or evidence could not be verified.
Apparent Width OnlyRejected · negative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Reason: The document explicitly states that true width cannot be determined due to uncertain geometry of mineralization.
Evidence · text
“The widths refer to drill hole intercepts; true width cannot be determined due to the uncertain geometry of mineralization.”
QA/QC DisclosedRejected · positive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Reason: The release details the QA/QC program including laboratory, standards, and blanks, and is signed off by a Qualified Person.
Evidence · text
“The QA/QC program includes laboratory and field standards inserted every ten samples. Blanks are inserted at the start of each submittal, and at least one blank is inserted every 25 standards. Qualified Person and Disclosure Alvin Jackson, P.Geo., Vice President of Exploration and Development for Freegold, is the Qualified Person who has approved the scientific and technical disclosure in this release.”
GS2656Golden Summit · goldGrade: 1.24Grade Unit: g/tIntercept: 213 mView all detailsHide details
Identity
- Hole ID
- GS2656
- Project
- Golden Summit
- Commodity
- gold
- Region
- usa_ak
- Reported Region
- usa_ak
- Ticker
- FVL
Geometry
- Grade
- 1.24
- Grade Unit
- g/t
- Intercept
- 213 m
- From
- 422 m
- To
- 635 m
- Hole Depth
- 758 m
- Intercept Depth
- 111.1 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- GS2656:422-635
- Mining Method
- open_pit
Location
- Location
- Dolphin Area
- Easting
- 478898
- Northing
- 7215339
- Azimuth
- 360 °
- Dip
- -90 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-10-15T00:00:00.000Z
Reasoning: This very long intercept with a moderate gold grade and strong GT product is highly material, demonstrating significant mineralization continuity and supporting resource definition for the PFS.
Positive factors
- Exceptional length with moderate gold grade, indicating significant mineralization.
- High GT product (264.12 g/t·m) is strong.
Negative factors
- True width not determined.
Evidence · table
“1.24”
Context: 213.0
Tags used in scoring
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
Rejected tags
Rejected tags — excluded from scoring because their label or evidence could not be verified.
Apparent Width OnlyRejected · negative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Reason: The document explicitly states that true width cannot be determined due to uncertain geometry of mineralization.
Evidence · text
“The widths refer to drill hole intercepts; true width cannot be determined due to the uncertain geometry of mineralization.”
QA/QC DisclosedRejected · positive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Reason: The release details the QA/QC program including laboratory, standards, and blanks, and is signed off by a Qualified Person.
Evidence · text
“The QA/QC program includes laboratory and field standards inserted every ten samples. Blanks are inserted at the start of each submittal, and at least one blank is inserted every 25 standards. Qualified Person and Disclosure Alvin Jackson, P.Geo., Vice President of Exploration and Development for Freegold, is the Qualified Person who has approved the scientific and technical disclosure in this release.”
GS2656Golden Summit · goldGrade: 5.77Grade Unit: g/tIntercept: 21 mView all detailsHide details
Identity
- Hole ID
- GS2656
- Project
- Golden Summit
- Commodity
- gold
- Region
- usa_ak
- Reported Region
- usa_ak
- Ticker
- FVL
Geometry
- Grade
- 5.77
- Grade Unit
- g/t
- Intercept
- 21 m
- From
- 467 m
- To
- 488 m
- Hole Depth
- 758 m
- Intercept Depth
- 111.1 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- GS2656:467-488
- Mining Method
- open_pit
Location
- Location
- Dolphin Area
- Easting
- 478898
- Northing
- 7215339
- Azimuth
- 360 °
- Dip
- -90 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-10-15T00:00:00.000Z
Reasoning: This exceptional high-grade inclusion within a broader intercept is very material, significantly contributing to the overall resource potential.
Positive factors
- Exceptional gold grade over a significant width, enhancing the broader mineralized zone.
- High GT product (121.17 g/t·m) is strong.
Negative factors
- True width not determined.
Evidence · table
“5.77”
Context: 21
Tags used in scoring
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
Rejected tags
Rejected tags — excluded from scoring because their label or evidence could not be verified.
Bonanza InterceptRejected · positive
Exceptionally high-grade zone, well above the deposit-type norm.
Reason: The grade of 5.77 g/t Au over 21m is well above the exceptional threshold for gold in an open pit setting (5 g/t Au).
Evidence · table
“5.77”
Context: 21
Apparent Width OnlyRejected · negative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Reason: The document explicitly states that true width cannot be determined due to uncertain geometry of mineralization.
Evidence · text
“The widths refer to drill hole intercepts; true width cannot be determined due to the uncertain geometry of mineralization.”
QA/QC DisclosedRejected · positive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Reason: The release details the QA/QC program including laboratory, standards, and blanks, and is signed off by a Qualified Person.
Evidence · text
“The QA/QC program includes laboratory and field standards inserted every ten samples. Blanks are inserted at the start of each submittal, and at least one blank is inserted every 25 standards. Qualified Person and Disclosure Alvin Jackson, P.Geo., Vice President of Exploration and Development for Freegold, is the Qualified Person who has approved the scientific and technical disclosure in this release.”
GS2656Golden Summit · goldGrade: 32.7Grade Unit: g/tIntercept: 3 mView all detailsHide details
Identity
- Hole ID
- GS2656
- Project
- Golden Summit
- Commodity
- gold
- Region
- usa_ak
- Reported Region
- usa_ak
- Ticker
- FVL
Geometry
- Grade
- 32.7
- Grade Unit
- g/t
- Intercept
- 3 m
- From
- 482 m
- To
- 485 m
- Hole Depth
- 758 m
- Intercept Depth
- 111.1 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- GS2656:482-485
- Mining Method
- open_pit
Location
- Location
- Dolphin Area
- Easting
- 478898
- Northing
- 7215339
- Azimuth
- 360 °
- Dip
- -90 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-10-15T00:00:00.000Z
Reasoning: This bonanza-grade inclusion within a broader intercept is highly material, indicating a very high-grade zone within the deposit.
Positive factors
- Bonanza gold grade over a narrow width, significantly enhancing the broader mineralized zone.
- High GT product (98.1 g/t·m) is strong.
Negative factors
- True width not determined.
Evidence · table
“32.7”
Context: 3.0
Tags used in scoring
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
Rejected tags
Rejected tags — excluded from scoring because their label or evidence could not be verified.
Bonanza InterceptRejected · positive
Exceptionally high-grade zone, well above the deposit-type norm.
Reason: The grade of 32.7 g/t Au over 3m is well above the exceptional threshold for gold in an open pit setting (5 g/t Au).
Evidence · table
“32.7”
Context: 3.0
Apparent Width OnlyRejected · negative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Reason: The document explicitly states that true width cannot be determined due to uncertain geometry of mineralization.
Evidence · text
“The widths refer to drill hole intercepts; true width cannot be determined due to the uncertain geometry of mineralization.”
QA/QC DisclosedRejected · positive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Reason: The release details the QA/QC program including laboratory, standards, and blanks, and is signed off by a Qualified Person.
Evidence · text
“The QA/QC program includes laboratory and field standards inserted every ten samples. Blanks are inserted at the start of each submittal, and at least one blank is inserted every 25 standards. Qualified Person and Disclosure Alvin Jackson, P.Geo., Vice President of Exploration and Development for Freegold, is the Qualified Person who has approved the scientific and technical disclosure in this release.”
GS2656Golden Summit · goldGrade: 1.2Grade Unit: g/tIntercept: 11.7 mView all detailsHide details
Identity
- Hole ID
- GS2656
- Project
- Golden Summit
- Commodity
- gold
- Region
- usa_ak
- Reported Region
- usa_ak
- Ticker
- FVL
Geometry
- Grade
- 1.2
- Grade Unit
- g/t
- Intercept
- 11.7 m
- From
- 515 m
- To
- 526.7 m
- Hole Depth
- 758 m
- Intercept Depth
- 111.1 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- GS2656:515-526.7
- Mining Method
- open_pit
Location
- Location
- Dolphin Area
- Easting
- 478898
- Northing
- 7215339
- Azimuth
- 360 °
- Dip
- -90 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-10-15T00:00:00.000Z
Reasoning: This inclusion within a larger interval shows consistent moderate gold grades over a good width, supporting the overall continuity.
Positive factors
- Moderate gold grade over a good width, contributing to the broader mineralized zone.
Negative factors
- True width not determined.
Evidence · table
“1.20”
Context: 11.7
Tags used in scoring
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
Rejected tags
Rejected tags — excluded from scoring because their label or evidence could not be verified.
Apparent Width OnlyRejected · negative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Reason: The document explicitly states that true width cannot be determined due to uncertain geometry of mineralization.
Evidence · text
“The widths refer to drill hole intercepts; true width cannot be determined due to the uncertain geometry of mineralization.”
QA/QC DisclosedRejected · positive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Reason: The release details the QA/QC program including laboratory, standards, and blanks, and is signed off by a Qualified Person.
Evidence · text
“The QA/QC program includes laboratory and field standards inserted every ten samples. Blanks are inserted at the start of each submittal, and at least one blank is inserted every 25 standards. Qualified Person and Disclosure Alvin Jackson, P.Geo., Vice President of Exploration and Development for Freegold, is the Qualified Person who has approved the scientific and technical disclosure in this release.”
GS2656Golden Summit · goldGrade: 3.29Grade Unit: g/tIntercept: 6 mView all detailsHide details
Identity
- Hole ID
- GS2656
- Project
- Golden Summit
- Commodity
- gold
- Region
- usa_ak
- Reported Region
- usa_ak
- Ticker
- FVL
Geometry
- Grade
- 3.29
- Grade Unit
- g/t
- Intercept
- 6 m
- From
- 539 m
- To
- 545 m
- Hole Depth
- 758 m
- Intercept Depth
- 111.1 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- GS2656:539-545
- Mining Method
- open_pit
Location
- Location
- Dolphin Area
- Easting
- 478898
- Northing
- 7215339
- Azimuth
- 360 °
- Dip
- -90 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-10-15T00:00:00.000Z
Reasoning: This high-grade inclusion within a broader intercept is material, contributing positively to the overall mineralization.
Positive factors
- Strong gold grade over a good width, enhancing the broader mineralized zone.
- GT product (19.74 g/t·m) is moderate.
Negative factors
- True width not determined.
Evidence · table
“3.29”
Context: 6.0
Tags used in scoring
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
Rejected tags
Rejected tags — excluded from scoring because their label or evidence could not be verified.
Apparent Width OnlyRejected · negative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Reason: The document explicitly states that true width cannot be determined due to uncertain geometry of mineralization.
Evidence · text
“The widths refer to drill hole intercepts; true width cannot be determined due to the uncertain geometry of mineralization.”
QA/QC DisclosedRejected · positive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Reason: The release details the QA/QC program including laboratory, standards, and blanks, and is signed off by a Qualified Person.
Evidence · text
“The QA/QC program includes laboratory and field standards inserted every ten samples. Blanks are inserted at the start of each submittal, and at least one blank is inserted every 25 standards. Qualified Person and Disclosure Alvin Jackson, P.Geo., Vice President of Exploration and Development for Freegold, is the Qualified Person who has approved the scientific and technical disclosure in this release.”
GS2656Golden Summit · goldGrade: 1.26Grade Unit: g/tIntercept: 18.9 mView all detailsHide details
Identity
- Hole ID
- GS2656
- Project
- Golden Summit
- Commodity
- gold
- Region
- usa_ak
- Reported Region
- usa_ak
- Ticker
- FVL
Geometry
- Grade
- 1.26
- Grade Unit
- g/t
- Intercept
- 18.9 m
- From
- 562.9 m
- To
- 581.8 m
- Hole Depth
- 758 m
- Intercept Depth
- 111.1 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- GS2656:562.9-581.8
- Mining Method
- open_pit
Location
- Location
- Dolphin Area
- Easting
- 478898
- Northing
- 7215339
- Azimuth
- 360 °
- Dip
- -90 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-10-15T00:00:00.000Z
Reasoning: This inclusion within a larger interval shows consistent moderate gold grades over a good width, supporting the overall continuity.
Positive factors
- Moderate gold grade over a good width, contributing to the broader mineralized zone.
Negative factors
- True width not determined.
Evidence · table
“1.26”
Context: 18.9
Tags used in scoring
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
Rejected tags
Rejected tags — excluded from scoring because their label or evidence could not be verified.
Apparent Width OnlyRejected · negative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Reason: The document explicitly states that true width cannot be determined due to uncertain geometry of mineralization.
Evidence · text
“The widths refer to drill hole intercepts; true width cannot be determined due to the uncertain geometry of mineralization.”
QA/QC DisclosedRejected · positive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Reason: The release details the QA/QC program including laboratory, standards, and blanks, and is signed off by a Qualified Person.
Evidence · text
“The QA/QC program includes laboratory and field standards inserted every ten samples. Blanks are inserted at the start of each submittal, and at least one blank is inserted every 25 standards. Qualified Person and Disclosure Alvin Jackson, P.Geo., Vice President of Exploration and Development for Freegold, is the Qualified Person who has approved the scientific and technical disclosure in this release.”
GS2656Golden Summit · goldGrade: 1.05Grade Unit: g/tIntercept: 39 mView all detailsHide details
Identity
- Hole ID
- GS2656
- Project
- Golden Summit
- Commodity
- gold
- Region
- usa_ak
- Reported Region
- usa_ak
- Ticker
- FVL
Geometry
- Grade
- 1.05
- Grade Unit
- g/t
- Intercept
- 39 m
- From
- 596 m
- To
- 635 m
- Hole Depth
- 758 m
- Intercept Depth
- 111.1 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- GS2656:596-635
- Mining Method
- open_pit
Location
- Location
- Dolphin Area
- Easting
- 478898
- Northing
- 7215339
- Azimuth
- 360 °
- Dip
- -90 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-10-15T00:00:00.000Z
Reasoning: This inclusion within a larger interval shows consistent moderate gold grades over a significant width, supporting the overall continuity.
Positive factors
- Moderate gold grade over a significant width, contributing to the broader mineralized zone.
Negative factors
- True width not determined.
Evidence · table
“1.05”
Context: 39.0
Tags used in scoring
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
Rejected tags
Rejected tags — excluded from scoring because their label or evidence could not be verified.
Apparent Width OnlyRejected · negative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Reason: The document explicitly states that true width cannot be determined due to uncertain geometry of mineralization.
Evidence · text
“The widths refer to drill hole intercepts; true width cannot be determined due to the uncertain geometry of mineralization.”
QA/QC DisclosedRejected · positive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Reason: The release details the QA/QC program including laboratory, standards, and blanks, and is signed off by a Qualified Person.
Evidence · text
“The QA/QC program includes laboratory and field standards inserted every ten samples. Blanks are inserted at the start of each submittal, and at least one blank is inserted every 25 standards. Qualified Person and Disclosure Alvin Jackson, P.Geo., Vice President of Exploration and Development for Freegold, is the Qualified Person who has approved the scientific and technical disclosure in this release.”
GS2644Golden Summit · goldGrade: 0.97Grade Unit: g/tIntercept: 9.1 mView all detailsHide details
Identity
- Hole ID
- GS2644
- Project
- Golden Summit
- Commodity
- gold
- Region
- usa_ak
- Reported Region
- usa_ak
- Ticker
- FVL
Geometry
- Grade
- 0.97
- Grade Unit
- g/t
- Intercept
- 9.1 m
- From
- 160.6 m
- To
- 169.7 m
- Hole Depth
- 349.6 m
- Intercept Depth
- 160.6 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- GS2644:160.6-169.7
- Mining Method
- open_pit
Location
- Location
- Cleary Area
- Easting
- 479803
- Northing
- 7215303
- Azimuth
- 360 °
- Dip
- -90 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-10-15T00:00:00.000Z
Reasoning: This intercept shows a moderate gold grade over a good width, contributing to the overall mineralization in the Cleary Area.
Positive factors
- Moderate gold grade over a good width.
Negative factors
- True width not determined.
Evidence · table
“0.97”
Context: 9.1
Tags used in scoring
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
Rejected tags
Rejected tags — excluded from scoring because their label or evidence could not be verified.
Apparent Width OnlyRejected · negative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Reason: The document explicitly states that true width cannot be determined due to uncertain geometry of mineralization.
Evidence · text
“The widths refer to drill hole intercepts; true width cannot be determined due to the uncertain geometry of mineralization.”
QA/QC DisclosedRejected · positive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Reason: The release details the QA/QC program including laboratory, standards, and blanks, and is signed off by a Qualified Person.
Evidence · text
“The QA/QC program includes laboratory and field standards inserted every ten samples. Blanks are inserted at the start of each submittal, and at least one blank is inserted every 25 standards. Qualified Person and Disclosure Alvin Jackson, P.Geo., Vice President of Exploration and Development for Freegold, is the Qualified Person who has approved the scientific and technical disclosure in this release.”
GS2644Golden Summit · goldGrade: 1.03Grade Unit: g/tIntercept: 17.9 mView all detailsHide details
Identity
- Hole ID
- GS2644
- Project
- Golden Summit
- Commodity
- gold
- Region
- usa_ak
- Reported Region
- usa_ak
- Ticker
- FVL
Geometry
- Grade
- 1.03
- Grade Unit
- g/t
- Intercept
- 17.9 m
- From
- 252.1 m
- To
- 270 m
- Hole Depth
- 349.6 m
- Intercept Depth
- 160.6 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- GS2644:252.1-270
- Mining Method
- open_pit
Location
- Location
- Cleary Area
- Easting
- 479803
- Northing
- 7215303
- Azimuth
- 360 °
- Dip
- -90 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-10-15T00:00:00.000Z
Reasoning: This intercept shows a moderate gold grade over a good width, contributing to the overall mineralization in the Cleary Area.
Positive factors
- Moderate gold grade over a good width.
Negative factors
- True width not determined.
Evidence · table
“1.03”
Context: 17.9
Tags used in scoring
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
Rejected tags
Rejected tags — excluded from scoring because their label or evidence could not be verified.
Apparent Width OnlyRejected · negative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Reason: The document explicitly states that true width cannot be determined due to uncertain geometry of mineralization.
Evidence · text
“The widths refer to drill hole intercepts; true width cannot be determined due to the uncertain geometry of mineralization.”
QA/QC DisclosedRejected · positive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Reason: The release details the QA/QC program including laboratory, standards, and blanks, and is signed off by a Qualified Person.
Evidence · text
“The QA/QC program includes laboratory and field standards inserted every ten samples. Blanks are inserted at the start of each submittal, and at least one blank is inserted every 25 standards. Qualified Person and Disclosure Alvin Jackson, P.Geo., Vice President of Exploration and Development for Freegold, is the Qualified Person who has approved the scientific and technical disclosure in this release.”
GS2644Golden Summit · goldGrade: 1.01Grade Unit: g/tIntercept: 7.1 mView all detailsHide details
Identity
- Hole ID
- GS2644
- Project
- Golden Summit
- Commodity
- gold
- Region
- usa_ak
- Reported Region
- usa_ak
- Ticker
- FVL
Geometry
- Grade
- 1.01
- Grade Unit
- g/t
- Intercept
- 7.1 m
- From
- 315.1 m
- To
- 322.2 m
- Hole Depth
- 349.6 m
- Intercept Depth
- 160.6 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- GS2644:315.1-322.2
- Mining Method
- open_pit
Location
- Location
- Cleary Area
- Easting
- 479803
- Northing
- 7215303
- Azimuth
- 360 °
- Dip
- -90 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-10-15T00:00:00.000Z
Reasoning: This intercept shows a moderate gold grade over a good width, contributing to the overall mineralization in the Cleary Area.
Positive factors
- Moderate gold grade over a good width.
Negative factors
- True width not determined.
Evidence · table
“1.01”
Context: 7.1
Tags used in scoring
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
Rejected tags
Rejected tags — excluded from scoring because their label or evidence could not be verified.
Apparent Width OnlyRejected · negative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Reason: The document explicitly states that true width cannot be determined due to uncertain geometry of mineralization.
Evidence · text
“The widths refer to drill hole intercepts; true width cannot be determined due to the uncertain geometry of mineralization.”
QA/QC DisclosedRejected · positive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Reason: The release details the QA/QC program including laboratory, standards, and blanks, and is signed off by a Qualified Person.
Evidence · text
“The QA/QC program includes laboratory and field standards inserted every ten samples. Blanks are inserted at the start of each submittal, and at least one blank is inserted every 25 standards. Qualified Person and Disclosure Alvin Jackson, P.Geo., Vice President of Exploration and Development for Freegold, is the Qualified Person who has approved the scientific and technical disclosure in this release.”
GS2652Golden Summit · goldGrade: 2.1Grade Unit: g/tIntercept: 9.1 mView all detailsHide details
Identity
- Hole ID
- GS2652
- Project
- Golden Summit
- Commodity
- gold
- Region
- usa_ak
- Reported Region
- usa_ak
- Ticker
- FVL
Geometry
- Grade
- 2.1
- Grade Unit
- g/t
- Intercept
- 9.1 m
- From
- 270.4 m
- To
- 279.5 m
- Hole Depth
- 346.6 m
- Intercept Depth
- 270.4 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- GS2652:270.4-279.5
- Mining Method
- open_pit
Location
- Location
- Cleary Area
- Easting
- 479754
- Northing
- 7215281
- Azimuth
- 360 °
- Dip
- -75 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-10-15T00:00:00.000Z
Reasoning: This intercept shows a strong gold grade over a good width, contributing positively to the overall mineralization in the Cleary Area.
Positive factors
- Strong gold grade over a good width.
Negative factors
- True width not determined.
Evidence · table
“2.1”
Context: 9.1
Tags used in scoring
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
Rejected tags
Rejected tags — excluded from scoring because their label or evidence could not be verified.
Apparent Width OnlyRejected · negative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Reason: The document explicitly states that true width cannot be determined due to uncertain geometry of mineralization.
Evidence · text
“The widths refer to drill hole intercepts; true width cannot be determined due to the uncertain geometry of mineralization.”
QA/QC DisclosedRejected · positive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Reason: The release details the QA/QC program including laboratory, standards, and blanks, and is signed off by a Qualified Person.
Evidence · text
“The QA/QC program includes laboratory and field standards inserted every ten samples. Blanks are inserted at the start of each submittal, and at least one blank is inserted every 25 standards. Qualified Person and Disclosure Alvin Jackson, P.Geo., Vice President of Exploration and Development for Freegold, is the Qualified Person who has approved the scientific and technical disclosure in this release.”
GS2642Golden Summit · goldGrade: 1.81Grade Unit: g/tIntercept: 5.5 mView all detailsHide details
Identity
- Hole ID
- GS2642
- Project
- Golden Summit
- Commodity
- gold
- Region
- usa_ak
- Reported Region
- usa_ak
- Ticker
- FVL
Geometry
- Grade
- 1.81
- Grade Unit
- g/t
- Intercept
- 5.5 m
- From
- 70.2 m
- To
- 75.7 m
- Hole Depth
- 209 m
- Intercept Depth
- 70.2 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- GS2642:70.2-75.7
- Mining Method
- open_pit
Location
- Location
- Dolphin Area
- Easting
- 479255
- Northing
- 7215624
- Azimuth
- 360 °
- Dip
- -75 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-10-15T00:00:00.000Z
Reasoning: This intercept shows a moderate gold grade over a narrow width, contributing to the overall mineralization, but from a condemnation hole.
Positive factors
- Moderate gold grade over a narrow width.
Negative factors
- True width not determined.
Evidence · table
“1.81”
Context: 5.5
Tags used in scoring
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Rejected tags
Rejected tags — excluded from scoring because their label or evidence could not be verified.
Apparent Width OnlyRejected · negative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Reason: The document explicitly states that true width cannot be determined due to uncertain geometry of mineralization.
Evidence · text
“The widths refer to drill hole intercepts; true width cannot be determined due to the uncertain geometry of mineralization.”
QA/QC DisclosedRejected · positive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Reason: The release details the QA/QC program including laboratory, standards, and blanks, and is signed off by a Qualified Person.
Evidence · text
“The QA/QC program includes laboratory and field standards inserted every ten samples. Blanks are inserted at the start of each submittal, and at least one blank is inserted every 25 standards. Qualified Person and Disclosure Alvin Jackson, P.Geo., Vice President of Exploration and Development for Freegold, is the Qualified Person who has approved the scientific and technical disclosure in this release.”
GS2643Golden Summit · goldGrade: 3.45Grade Unit: g/tIntercept: 3 mView all detailsHide details
Identity
- Hole ID
- GS2643
- Project
- Golden Summit
- Commodity
- gold
- Region
- usa_ak
- Reported Region
- usa_ak
- Ticker
- FVL
Geometry
- Grade
- 3.45
- Grade Unit
- g/t
- Intercept
- 3 m
- From
- 134 m
- To
- 137 m
- Hole Depth
- 281.6 m
- Intercept Depth
- 134 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- GS2643:134-137
- Mining Method
- open_pit
Location
- Location
- Dolphin Area
- Easting
- 479154
- Northing
- 7215742
- Azimuth
- 360 °
- Dip
- -75 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-10-15T00:00:00.000Z
Reasoning: This intercept shows a strong gold grade over a narrow width, but it's from a condemnation hole, which limits its positive impact on resource growth.
Positive factors
- Strong gold grade over a narrow width.
Negative factors
- True width not determined.
- From a condemnation hole, testing limits of the system.
Evidence · table
“3.45”
Context: 3
Tags used in scoring
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Rejected tags
Rejected tags — excluded from scoring because their label or evidence could not be verified.
Apparent Width OnlyRejected · negative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Reason: The document explicitly states that true width cannot be determined due to uncertain geometry of mineralization.
Evidence · text
“The widths refer to drill hole intercepts; true width cannot be determined due to the uncertain geometry of mineralization.”
QA/QC DisclosedRejected · positive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Reason: The release details the QA/QC program including laboratory, standards, and blanks, and is signed off by a Qualified Person.
Evidence · text
“The QA/QC program includes laboratory and field standards inserted every ten samples. Blanks are inserted at the start of each submittal, and at least one blank is inserted every 25 standards. Qualified Person and Disclosure Alvin Jackson, P.Geo., Vice President of Exploration and Development for Freegold, is the Qualified Person who has approved the scientific and technical disclosure in this release.”
GS2643Golden Summit · goldGrade: 0.96Grade Unit: g/tIntercept: 5.8 mView all detailsHide details
Identity
- Hole ID
- GS2643
- Project
- Golden Summit
- Commodity
- gold
- Region
- usa_ak
- Reported Region
- usa_ak
- Ticker
- FVL
Geometry
- Grade
- 0.96
- Grade Unit
- g/t
- Intercept
- 5.8 m
- From
- 161 m
- To
- 166.8 m
- Hole Depth
- 281.6 m
- Intercept Depth
- 134 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- GS2643:161-166.8
- Mining Method
- open_pit
Location
- Location
- Dolphin Area
- Easting
- 479154
- Northing
- 7215742
- Azimuth
- 360 °
- Dip
- -75 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-10-15T00:00:00.000Z
Reasoning: This intercept shows a moderate gold grade over a narrow width, but it's from a condemnation hole, which limits its positive impact on resource growth.
Positive factors
- Moderate gold grade over a narrow width.
Negative factors
- True width not determined.
- From a condemnation hole, testing limits of the system.
Evidence · table
“0.96”
Context: 5.8
Tags used in scoring
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Rejected tags
Rejected tags — excluded from scoring because their label or evidence could not be verified.
Apparent Width OnlyRejected · negative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Reason: The document explicitly states that true width cannot be determined due to uncertain geometry of mineralization.
Evidence · text
“The widths refer to drill hole intercepts; true width cannot be determined due to the uncertain geometry of mineralization.”
QA/QC DisclosedRejected · positive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Reason: The release details the QA/QC program including laboratory, standards, and blanks, and is signed off by a Qualified Person.
Evidence · text
“The QA/QC program includes laboratory and field standards inserted every ten samples. Blanks are inserted at the start of each submittal, and at least one blank is inserted every 25 standards. Qualified Person and Disclosure Alvin Jackson, P.Geo., Vice President of Exploration and Development for Freegold, is the Qualified Person who has approved the scientific and technical disclosure in this release.”
GS2645Golden Summit · goldGrade: 0.85Grade Unit: g/tIntercept: 4.1 mView all detailsHide details
Identity
- Hole ID
- GS2645
- Project
- Golden Summit
- Commodity
- gold
- Region
- usa_ak
- Reported Region
- usa_ak
- Ticker
- FVL
Geometry
- Grade
- 0.85
- Grade Unit
- g/t
- Intercept
- 4.1 m
- From
- 20 m
- To
- 24.1 m
- Hole Depth
- 425 m
- Intercept Depth
- 20 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- GS2645:20-24.1
- Mining Method
- open_pit
Location
- Location
- Dolphin Area
- Easting
- 479200
- Northing
- 7215703
- Azimuth
- 360 °
- Dip
- -75 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-10-15T00:00:00.000Z
Reasoning: This intercept shows a moderate gold grade over a narrow width, but it's from a condemnation hole, which limits its positive impact on resource growth.
Positive factors
- Moderate gold grade over a narrow width.
Negative factors
- True width not determined.
- From a condemnation hole, testing limits of the system.
Evidence · table
“0.85”
Context: 4.1
Tags used in scoring
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Rejected tags
Rejected tags — excluded from scoring because their label or evidence could not be verified.
Apparent Width OnlyRejected · negative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Reason: The document explicitly states that true width cannot be determined due to uncertain geometry of mineralization.
Evidence · text
“The widths refer to drill hole intercepts; true width cannot be determined due to the uncertain geometry of mineralization.”
QA/QC DisclosedRejected · positive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Reason: The release details the QA/QC program including laboratory, standards, and blanks, and is signed off by a Qualified Person.
Evidence · text
“The QA/QC program includes laboratory and field standards inserted every ten samples. Blanks are inserted at the start of each submittal, and at least one blank is inserted every 25 standards. Qualified Person and Disclosure Alvin Jackson, P.Geo., Vice President of Exploration and Development for Freegold, is the Qualified Person who has approved the scientific and technical disclosure in this release.”
GS2645Golden Summit · goldGrade: 1.12Grade Unit: g/tIntercept: 10.4 mView all detailsHide details
Identity
- Hole ID
- GS2645
- Project
- Golden Summit
- Commodity
- gold
- Region
- usa_ak
- Reported Region
- usa_ak
- Ticker
- FVL
Geometry
- Grade
- 1.12
- Grade Unit
- g/t
- Intercept
- 10.4 m
- From
- 51.1 m
- To
- 61.5 m
- Hole Depth
- 425 m
- Intercept Depth
- 20 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- GS2645:51.1-61.5
- Mining Method
- open_pit
Location
- Location
- Dolphin Area
- Easting
- 479200
- Northing
- 7215703
- Azimuth
- 360 °
- Dip
- -75 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-10-15T00:00:00.000Z
Reasoning: This intercept shows a moderate gold grade over a good width, but it's from a condemnation hole, which limits its positive impact on resource growth.
Positive factors
- Moderate gold grade over a good width.
Negative factors
- True width not determined.
- From a condemnation hole, testing limits of the system.
Evidence · table
“1.12”
Context: 10.4
Tags used in scoring
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Rejected tags
Rejected tags — excluded from scoring because their label or evidence could not be verified.
Apparent Width OnlyRejected · negative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Reason: The document explicitly states that true width cannot be determined due to uncertain geometry of mineralization.
Evidence · text
“The widths refer to drill hole intercepts; true width cannot be determined due to the uncertain geometry of mineralization.”
QA/QC DisclosedRejected · positive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Reason: The release details the QA/QC program including laboratory, standards, and blanks, and is signed off by a Qualified Person.
Evidence · text
“The QA/QC program includes laboratory and field standards inserted every ten samples. Blanks are inserted at the start of each submittal, and at least one blank is inserted every 25 standards. Qualified Person and Disclosure Alvin Jackson, P.Geo., Vice President of Exploration and Development for Freegold, is the Qualified Person who has approved the scientific and technical disclosure in this release.”
GS2645Golden Summit · goldGrade: 2.55Grade Unit: g/tIntercept: 6 mView all detailsHide details
Identity
- Hole ID
- GS2645
- Project
- Golden Summit
- Commodity
- gold
- Region
- usa_ak
- Reported Region
- usa_ak
- Ticker
- FVL
Geometry
- Grade
- 2.55
- Grade Unit
- g/t
- Intercept
- 6 m
- From
- 140 m
- To
- 146 m
- Hole Depth
- 425 m
- Intercept Depth
- 20 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- GS2645:140-146
- Mining Method
- open_pit
Location
- Location
- Dolphin Area
- Easting
- 479200
- Northing
- 7215703
- Azimuth
- 360 °
- Dip
- -75 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-10-15T00:00:00.000Z
Reasoning: This intercept shows a strong gold grade over a good width, but it's from a condemnation hole, which limits its positive impact on resource growth.
Positive factors
- Strong gold grade over a good width.
Negative factors
- True width not determined.
- From a condemnation hole, testing limits of the system.
Evidence · table
“2.55”
Context: 6
Tags used in scoring
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Rejected tags
Rejected tags — excluded from scoring because their label or evidence could not be verified.
Apparent Width OnlyRejected · negative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Reason: The document explicitly states that true width cannot be determined due to uncertain geometry of mineralization.
Evidence · text
“The widths refer to drill hole intercepts; true width cannot be determined due to the uncertain geometry of mineralization.”
QA/QC DisclosedRejected · positive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Reason: The release details the QA/QC program including laboratory, standards, and blanks, and is signed off by a Qualified Person.
Evidence · text
“The QA/QC program includes laboratory and field standards inserted every ten samples. Blanks are inserted at the start of each submittal, and at least one blank is inserted every 25 standards. Qualified Person and Disclosure Alvin Jackson, P.Geo., Vice President of Exploration and Development for Freegold, is the Qualified Person who has approved the scientific and technical disclosure in this release.”
Resource Estimates (4)
indicatedGolden Summit · goldTonnes: 63700000Grade: 0.45Grade Unit: g/tContained Metal: 920000Contained Unit: ozHistorical resultNeeds review: historical_restatementView all detailsHide details
Identity
- Project
- Golden Summit
- Commodity
- gold
- Region
- usa_ak
- Reported Region
- Alaska
- Ticker
- FVL
Resource scope
- Estimate type
- resource
- Effective date
- 2025-07-01T00:00:00.000Z
- Resource group id
- resource:0d3220860f98926e9fa6
- Material type
- oxide
Resource Data
- Category
- indicated
- Tonnes
- 63700000
- Grade
- 0.45
- Grade Unit
- g/t
- Contained Metal
- 920000
- Contained Unit
- oz
- Cutoff Grade
- 0.15
- Cutoff Unit
- g/t
Prior Estimate
- Resource Date
- 2025-07-01
Review
- Needs Review
- Yes
- Review Reason
- historical_restatement
- Historical
- Yes
- Historical Source Date
- 2025-07-01T00:00:00.000Z
Dates
- Event date
- 2026-10-15T00:00:00.000Z
Reasoning: This is a historical indicated oxide resource with a low gold grade, but it represents a significant tonnage for potential early feed for a starter pit.
Positive factors
- Significant indicated oxide resource tonnage.
Negative factors
- Low grade for gold.
- Historical estimate, not new information.
Evidence · text
“As of July 2025, Golden Summit hosts an Indicated Oxide Resource of 920,000 ounces at 0.45 g/t Au (63.7 million tonnes) and an Inferred Oxide Mineral Resource of 287,000 ounces at 0.47 g/t Au (18.8 million tonnes (using a 0.15 g/t cut off)”
Tags used in scoring
Indicated Resourcepositive
Reasonable geological confidence based on adequate drilling; continuity can be assumed. Basis for Probable Reserves.
Why it applies: category is "indicated"
Cut-off Disclosedpositive
Cut-off grade used for resource reporting is clearly stated, enabling like-for-like comparison.
Why it applies: cutoff_grade is stated
Resource Updateneutral
Revised estimate for an existing resource — compare to prior to assess progress.
Why it applies: the release compares against a previous estimate
PEA-Supportingneutral
Resource estimate prepared to support a Preliminary Economic Assessment — early-stage study.
Why it applies: the release names the study this estimate supports
PFS-Supportingneutral
Resource estimate prepared to support a Pre-Feasibility Study — requires adequate M&I component.
Why it applies: the release names the study this estimate supports
DFS-Supportingneutral
Resource estimate prepared to support a Definitive Feasibility Study — requires high M&I confidence.
Why it applies: the release names the study this estimate supports
inferredGolden Summit · goldTonnes: 18800000Grade: 0.47Grade Unit: g/tContained Metal: 287000Contained Unit: ozHistorical resultNeeds review: historical_restatementView all detailsHide details
Identity
- Project
- Golden Summit
- Commodity
- gold
- Region
- usa_ak
- Reported Region
- Alaska
- Ticker
- FVL
Resource scope
- Estimate type
- resource
- Effective date
- 2025-07-01T00:00:00.000Z
- Resource group id
- resource:78dc58e4f95e86afb6cd
- Material type
- oxide
Resource Data
- Category
- inferred
- Tonnes
- 18800000
- Grade
- 0.47
- Grade Unit
- g/t
- Contained Metal
- 287000
- Contained Unit
- oz
- Cutoff Grade
- 0.15
- Cutoff Unit
- g/t
Prior Estimate
- Resource Date
- 2025-07-01
Review
- Needs Review
- Yes
- Review Reason
- historical_restatement
- Historical
- Yes
- Historical Source Date
- 2025-07-01T00:00:00.000Z
Dates
- Event date
- 2026-10-15T00:00:00.000Z
Reasoning: This is a historical inferred oxide resource with a low gold grade and lower confidence, but it adds to the overall oxide potential.
Positive factors
- Significant inferred oxide resource tonnage.
Negative factors
- Low grade for gold.
- Inferred category indicates lower geological confidence.
- Historical estimate, not new information.
Evidence · text
“As of July 2025, Golden Summit hosts an Indicated Oxide Resource of 920,000 ounces at 0.45 g/t Au (63.7 million tonnes) and an Inferred Oxide Mineral Resource of 287,000 ounces at 0.47 g/t Au (18.8 million tonnes (using a 0.15 g/t cut off)”
Tags used in scoring
Cut-off Disclosedpositive
Cut-off grade used for resource reporting is clearly stated, enabling like-for-like comparison.
Why it applies: cutoff_grade is stated
Resource Updateneutral
Revised estimate for an existing resource — compare to prior to assess progress.
Why it applies: the release compares against a previous estimate
PEA-Supportingneutral
Resource estimate prepared to support a Preliminary Economic Assessment — early-stage study.
Why it applies: the release names the study this estimate supports
PFS-Supportingneutral
Resource estimate prepared to support a Pre-Feasibility Study — requires adequate M&I component.
Why it applies: the release names the study this estimate supports
DFS-Supportingneutral
Resource estimate prepared to support a Definitive Feasibility Study — requires high M&I confidence.
Why it applies: the release names the study this estimate supports
indicatedGolden Summit · goldTonnes: 432000000Grade: 1.24Grade Unit: g/tContained Metal: 17.2Contained Unit: mozHistorical resultNeeds review: historical_restatementView all detailsHide details
Identity
- Project
- Golden Summit
- Commodity
- gold
- Region
- usa_ak
- Reported Region
- Alaska
- Ticker
- FVL
Resource scope
- Estimate type
- resource
- Effective date
- 2025-07-01T00:00:00.000Z
- Resource group id
- resource:9a95abf4e293b060210d
- Material type
- Primary
Resource Data
- Category
- indicated
- Tonnes
- 432000000
- Grade
- 1.24
- Grade Unit
- g/t
- Contained Metal
- 17.2
- Contained Unit
- moz
- Cutoff Grade
- 0.5
- Cutoff Unit
- g/t
Prior Estimate
- Resource Date
- 2025-07-01
Review
- Needs Review
- Yes
- Review Reason
- historical_restatement
- Historical
- Yes
- Historical Source Date
- 2025-07-01T00:00:00.000Z
Dates
- Event date
- 2026-10-15T00:00:00.000Z
Reasoning: This is a historical indicated primary resource with a very large tonnage and good gold grade, representing a significant part of the project's overall potential.
Positive factors
- Very large indicated primary resource tonnage with a good gold grade.
Negative factors
- Historical estimate, not new information.
Evidence · text
“Indicated Primary Mineral Resource of 17.2 million ounces at 1.24 g/t Au (432 million tonnes)”
Tags used in scoring
Indicated Resourcepositive
Reasonable geological confidence based on adequate drilling; continuity can be assumed. Basis for Probable Reserves.
Why it applies: category is "indicated"
Cut-off Disclosedpositive
Cut-off grade used for resource reporting is clearly stated, enabling like-for-like comparison.
Why it applies: cutoff_grade is stated
Resource Updateneutral
Revised estimate for an existing resource — compare to prior to assess progress.
Why it applies: the release compares against a previous estimate
PEA-Supportingneutral
Resource estimate prepared to support a Preliminary Economic Assessment — early-stage study.
Why it applies: the release names the study this estimate supports
PFS-Supportingneutral
Resource estimate prepared to support a Pre-Feasibility Study — requires adequate M&I component.
Why it applies: the release names the study this estimate supports
DFS-Supportingneutral
Resource estimate prepared to support a Definitive Feasibility Study — requires high M&I confidence.
Why it applies: the release names the study this estimate supports
inferredGolden Summit · goldTonnes: 358000000Grade: 1.04Grade Unit: g/tContained Metal: 11.9Contained Unit: mozHistorical resultNeeds review: historical_restatementView all detailsHide details
Identity
- Project
- Golden Summit
- Commodity
- gold
- Region
- usa_ak
- Reported Region
- Alaska
- Ticker
- FVL
Resource scope
- Estimate type
- resource
- Effective date
- 2025-07-01T00:00:00.000Z
- Resource group id
- resource:973152bc10892cd51c82
- Material type
- Primary
Resource Data
- Category
- inferred
- Tonnes
- 358000000
- Grade
- 1.04
- Grade Unit
- g/t
- Contained Metal
- 11.9
- Contained Unit
- moz
- Cutoff Grade
- 0.5
- Cutoff Unit
- g/t
Prior Estimate
- Resource Date
- 2025-07-01
Review
- Needs Review
- Yes
- Review Reason
- historical_restatement
- Historical
- Yes
- Historical Source Date
- 2025-07-01T00:00:00.000Z
Dates
- Event date
- 2026-10-15T00:00:00.000Z
Reasoning: This is a historical inferred primary resource with a very large tonnage and good gold grade, contributing significantly to the project's overall potential, but with lower confidence due to its category.
Positive factors
- Very large inferred primary resource tonnage with a good gold grade.
Negative factors
- Inferred category indicates lower geological confidence.
- Historical estimate, not new information.
Evidence · text
“Inferred Primary Mineral Resource of 11.9 million ounces at 1.04 g/t Au (358 million tonnes)”
Tags used in scoring
Cut-off Disclosedpositive
Cut-off grade used for resource reporting is clearly stated, enabling like-for-like comparison.
Why it applies: cutoff_grade is stated
Resource Updateneutral
Revised estimate for an existing resource — compare to prior to assess progress.
Why it applies: the release compares against a previous estimate
PEA-Supportingneutral
Resource estimate prepared to support a Preliminary Economic Assessment — early-stage study.
Why it applies: the release names the study this estimate supports
PFS-Supportingneutral
Resource estimate prepared to support a Pre-Feasibility Study — requires adequate M&I component.
Why it applies: the release names the study this estimate supports
DFS-Supportingneutral
Resource estimate prepared to support a Definitive Feasibility Study — requires high M&I confidence.
Why it applies: the release names the study this estimate supports
How Atlas produces this analysis
Minestarters Atlas uses automated extraction to summarize mining announcements, identify reported measurements, and classify supporting evidence. Sentiment reflects the extracted narrative and classification rules; it is an interpretation, not a reported measurement. Evidence quotes and context are provided where available. Missing data, low-confidence results, and review flags indicate limitations. Check the original publisher announcement before relying on an interpretation.