Freegold drills 1.24 g/t Au over 213m including 21m of 5.77 g/t Au at Golden Summit
Original announcement by orestocks on
- Company
- Freegold Limited
- Ticker
- FVL.TO
- Exchange
- Unavailable
- Region
- Alaska
- Primary commodity
- Gold
- Secondary commodities
- None reported
- Document categories
- Drill results, Other, Resource update
- Extracted
- 2026-10-15 12:17:20 UTC
Analysis by Minestarters Atlas
Atlas analysis published:
Minestarters Atlas analysis
Summary
Freegold Limited reported new drill results from its Golden Summit project in Alaska, highlighted by 213m at 1.24 g/t gold, including 21m at 5.77 g/t gold, from the Dolphin area. These results confirm continuity and higher-grade zones, providing critical data for the ongoing pre-feasibility study (PFS) targeted for 2027. The company is focusing on defining an initial development step for the PFS, supported by extensive drilling and technical de-risking work.
Reasoning: New infill and condemnation drill results from the Golden Summit project confirm broad gold mineralization and high-grade zones, providing critical data for the ongoing pre-feasibility study and resource definition. While the average grade of the longest intercept is below the project average, the exceptional length and high-grade sub-intervals are significant.
Positive factors
- long_intercept_width
- high_grade_intercept
- strong_grade_x_width
- continuity_confirmed
- supports_pfs
- qaqc_disclosed
- qp_signed
Negative factors
- apparent_width_only
- infill_drilling
- grade_below_project_average
Facts used in scoring: 38
Classification and evidence
Apparent Width Onlynegative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Why it applies: The document explicitly states that 'true width cannot be determined due to the uncertain geometry of mineralization' for all reported drill hole intercepts.
Evidence · text
“The widths refer to drill hole intercepts; true width cannot be determined due to the uncertain geometry of mineralization.”
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: The release includes a dedicated 'Analytical Program and QA/QC' section detailing laboratory procedures, sample preparation, assay methods (ALS PhotonAssay, ICP-AES, Fire Assay), and the insertion of blanks, standards, and duplicates.
Evidence · text
“Analytical Program and QA/QC HQ core is logged, photographed and cut in half using a diamond saw. One-half is placed in sealed bags for preparation and subsequent geochemical analysis by ALS facilities in Vancouver and Thunder Bay. Core samples were delivered to ALS's facility in Vancouver, Canada, where each sample was crushed to 70% passing a 2 mm (Tyler 9 mesh, U.S. Std. No. 10) screen. In Thunder Bay, a representative ~500 g subsample was obtained by riffle splitting (SPL-32a) and analyzed for gold using the ALS method Au-PA01 (PhotonAssay), which provides a detection range of 0.03 ppm to 350 ppm. In Vancouver, a subsample was also analyzed for multi-element geochemistry using the ALS method ME-ICP61 (34-element, four-acid ICP-AES). Occasionally, samples are smaller than 500 g and are then assayed by Fire Assay with an AAS finish, method code Au-AA23 (30 g sample size); samples over 10 g/t Au are then automatically assayed using a FA Grav method, Au-GRAV21. Additional Au screening may be performed using ALS's Au-SCR24 method; select samples are dry-screened to 100 microns. A duplicate 50 g fire assay is conducted on the fine fraction, and the entire oversize fraction is assayed. Total Au content, individual assays, and weight fractions are reported. The QA/QC program includes laboratory and field standards inserted every ten samples. Blanks are inserted at the start of each submittal, and at least one blank is inserted every 25 standards.”
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: The document explicitly states that the drill holes 'include infill holes in the Dolphin and Cleary areas' and 'Closer-spaced infill drilling and refinements to the geological model are now connecting previously isolated higher-grade intercepts into more coherent mineralized corridors'.
Evidence · text
“The eight drill holes in this release are from the ongoing 2026 program and include infill holes in the Dolphin and Cleary areas, as well as condemnation holes testing the margins of the known deposit.”
Bonanza Interceptpositive
Exceptionally high-grade zone, well above the deposit-type norm.
Why it applies: The intercept of 32.7 g/t Au over 3.1m in hole GS2656 significantly exceeds the exceptional threshold of 5 g/t Au for open-pit gold deposits.
Evidence · table
“32.7”
Context: 3.0
PFS-Supportingneutral
Resource estimate prepared to support a Pre-Feasibility Study — requires adequate M&I component.
Why it applies: The document repeatedly states that the drilling program is 'defining a focused starting point for the 2027 pre-feasibility study', 'advancing PFS design and planning', and 'laying the technical foundation for a credible 2027 PFS'.
Evidence · text
“Drilling is defining a focused starting point for the 2027 pre-feasibility study, within one of North America's largest undeveloped gold resources.”
Extracted facts
Stored fact records: 38. Some facts used in scoring do not have a stored record.
Drill Results (38)
GS2647Golden Summit · goldGrade: 0.98Grade Unit: g/tIntercept: 82.3 mView all detailsHide details
Identity
- Hole ID
- GS2647
- Project
- Golden Summit
- Commodity
- gold
- Region
- usa_ak
- Reported Region
- usa_ak
- Ticker
- FVL.TO
Geometry
- Grade
- 0.98
- Grade Unit
- g/t
- Intercept
- 82.3 m
- From
- 136.2 m
- To
- 218.5 m
- Hole Depth
- 898.2 m
- Intercept Depth
- 136.2 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- GS2647:136.2-218.5
- Mining Method
- open_pit
Location
- Easting
- 479001
- Northing
- 7215086
- Azimuth
- 360 °
- Dip
- -90 °
- Loc. Confidence
- medium
- Loc. Source
- document
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Deleterious
- Deleterious Flag
- No
Metal Equivalent
- Assumptions Disclosed
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-10-15T00:00:00.000Z
Reasoning: A long intercept of 82.3m at 0.98 g/t gold confirms continuity in the Dolphin area, supporting the PFS, though the grade is below the project average.
Positive factors
- long_intercept_width
- continuity_confirmed
- supports_pfs
- qaqc_disclosed
- qp_signed
Negative factors
- apparent_width_only
- infill_drilling
- grade_below_project_average
Evidence · table
“0.98”
Context: 82.3
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
GS2647Golden Summit · goldGrade: 0.86Grade Unit: g/tIntercept: 24.3 mView all detailsHide details
Identity
- Hole ID
- GS2647
- Project
- Golden Summit
- Commodity
- gold
- Region
- usa_ak
- Reported Region
- usa_ak
- Ticker
- FVL.TO
Geometry
- Grade
- 0.86
- Grade Unit
- g/t
- Intercept
- 24.3 m
- From
- 242.9 m
- To
- 267.2 m
- Hole Depth
- 898.2 m
- Intercept Depth
- 136.2 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- GS2647:242.9-267.2
- Mining Method
- open_pit
Location
- Easting
- 479001
- Northing
- 7215086
- Azimuth
- 360 °
- Dip
- -90 °
- Loc. Confidence
- medium
- Loc. Source
- document
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Deleterious
- Deleterious Flag
- No
Metal Equivalent
- Assumptions Disclosed
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-10-15T00:00:00.000Z
Reasoning: A moderate intercept of 24.3m at 0.86 g/t gold contributes to continuity in the Dolphin area, supporting the PFS, though the grade is below the project average.
Positive factors
- continuity_confirmed
- supports_pfs
- qaqc_disclosed
- qp_signed
Negative factors
- apparent_width_only
- infill_drilling
- grade_below_project_average
Evidence · table
“0.86”
Context: 24.3
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
GS2647Golden Summit · goldGrade: 0.73Grade Unit: g/tIntercept: 375 mView all detailsHide details
Identity
- Hole ID
- GS2647
- Project
- Golden Summit
- Commodity
- gold
- Region
- usa_ak
- Reported Region
- usa_ak
- Ticker
- FVL.TO
Geometry
- Grade
- 0.73
- Grade Unit
- g/t
- Intercept
- 375 m
- From
- 367.8 m
- To
- 742.8 m
- Hole Depth
- 898.2 m
- Intercept Depth
- 136.2 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- GS2647:367.8-742.8
- Mining Method
- open_pit
Location
- Easting
- 479001
- Northing
- 7215086
- Azimuth
- 360 °
- Dip
- -90 °
- Loc. Confidence
- medium
- Loc. Source
- document
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Deleterious
- Deleterious Flag
- No
Metal Equivalent
- Assumptions Disclosed
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-10-15T00:00:00.000Z
Reasoning: An exceptionally long intercept of 375m at 0.73 g/t gold demonstrates broad continuity of mineralization, supporting the PFS, despite the grade being below the project average.
Positive factors
- long_intercept_width
- continuity_confirmed
- supports_pfs
- qaqc_disclosed
- qp_signed
Negative factors
- apparent_width_only
- infill_drilling
- grade_below_project_average
Evidence · table
“0.73”
Context: 375
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
GS2647Golden Summit · goldGrade: 0.84Grade Unit: g/tIntercept: 37.8 mView all detailsHide details
Identity
- Hole ID
- GS2647
- Project
- Golden Summit
- Commodity
- gold
- Region
- usa_ak
- Reported Region
- usa_ak
- Ticker
- FVL.TO
Geometry
- Grade
- 0.84
- Grade Unit
- g/t
- Intercept
- 37.8 m
- From
- 388 m
- To
- 425.8 m
- Hole Depth
- 898.2 m
- Intercept Depth
- 136.2 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- GS2647:388-425.8
- Mining Method
- open_pit
Location
- Easting
- 479001
- Northing
- 7215086
- Azimuth
- 360 °
- Dip
- -90 °
- Loc. Confidence
- medium
- Loc. Source
- document
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Deleterious
- Deleterious Flag
- No
Metal Equivalent
- Assumptions Disclosed
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-10-15T00:00:00.000Z
Reasoning: A sub-interval of 37.8m at 0.84 g/t gold within a broader zone contributes to confirming mineralization continuity for the PFS.
Positive factors
- continuity_confirmed
- supports_pfs
- qaqc_disclosed
- qp_signed
Negative factors
- apparent_width_only
- infill_drilling
- grade_below_project_average
Evidence · table
“0.84”
Context: 37.8
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
GS2647Golden Summit · goldGrade: 0.84Grade Unit: g/tIntercept: 112.8 mView all detailsHide details
Identity
- Hole ID
- GS2647
- Project
- Golden Summit
- Commodity
- gold
- Region
- usa_ak
- Reported Region
- usa_ak
- Ticker
- FVL.TO
Geometry
- Grade
- 0.84
- Grade Unit
- g/t
- Intercept
- 112.8 m
- From
- 447.1 m
- To
- 559.9 m
- Hole Depth
- 898.2 m
- Intercept Depth
- 136.2 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- GS2647:447.1-559.9
- Mining Method
- open_pit
Location
- Easting
- 479001
- Northing
- 7215086
- Azimuth
- 360 °
- Dip
- -90 °
- Loc. Confidence
- medium
- Loc. Source
- document
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Deleterious
- Deleterious Flag
- No
Metal Equivalent
- Assumptions Disclosed
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-10-15T00:00:00.000Z
Reasoning: A long sub-interval of 112.8m at 0.84 g/t gold within a broader zone demonstrates continuity of mineralization, supporting the PFS.
Positive factors
- long_intercept_width
- continuity_confirmed
- supports_pfs
- qaqc_disclosed
- qp_signed
Negative factors
- apparent_width_only
- infill_drilling
- grade_below_project_average
Evidence · table
“0.84”
Context: 112.8
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
GS2647Golden Summit · goldGrade: 0.97Grade Unit: g/tIntercept: 45.7 mView all detailsHide details
Identity
- Hole ID
- GS2647
- Project
- Golden Summit
- Commodity
- gold
- Region
- usa_ak
- Reported Region
- usa_ak
- Ticker
- FVL.TO
Geometry
- Grade
- 0.97
- Grade Unit
- g/t
- Intercept
- 45.7 m
- From
- 474.6 m
- To
- 520.3 m
- Hole Depth
- 898.2 m
- Intercept Depth
- 136.2 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- GS2647:474.6-520.3
- Mining Method
- open_pit
Location
- Easting
- 479001
- Northing
- 7215086
- Azimuth
- 360 °
- Dip
- -90 °
- Loc. Confidence
- medium
- Loc. Source
- document
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Deleterious
- Deleterious Flag
- No
Metal Equivalent
- Assumptions Disclosed
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-10-15T00:00:00.000Z
Reasoning: A sub-interval of 45.7m at 0.97 g/t gold within a broader zone contributes to confirming mineralization continuity for the PFS.
Positive factors
- continuity_confirmed
- supports_pfs
- qaqc_disclosed
- qp_signed
Negative factors
- apparent_width_only
- infill_drilling
- grade_below_project_average
Evidence · table
“0.97”
Context: 45.7
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
GS2647Golden Summit · goldGrade: 0.83Grade Unit: g/tIntercept: 27.4 mView all detailsHide details
Identity
- Hole ID
- GS2647
- Project
- Golden Summit
- Commodity
- gold
- Region
- usa_ak
- Reported Region
- usa_ak
- Ticker
- FVL.TO
Geometry
- Grade
- 0.83
- Grade Unit
- g/t
- Intercept
- 27.4 m
- From
- 633.1 m
- To
- 660.5 m
- Hole Depth
- 898.2 m
- Intercept Depth
- 136.2 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- GS2647:633.1-660.5
- Mining Method
- open_pit
Location
- Easting
- 479001
- Northing
- 7215086
- Azimuth
- 360 °
- Dip
- -90 °
- Loc. Confidence
- medium
- Loc. Source
- document
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Deleterious
- Deleterious Flag
- No
Metal Equivalent
- Assumptions Disclosed
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-10-15T00:00:00.000Z
Reasoning: A moderate sub-interval of 27.4m at 0.83 g/t gold contributes to continuity in the Dolphin area, supporting the PFS.
Positive factors
- continuity_confirmed
- supports_pfs
- qaqc_disclosed
- qp_signed
Negative factors
- apparent_width_only
- infill_drilling
- grade_below_project_average
Evidence · table
“0.83”
Context: 27.4
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
GS2647Golden Summit · goldGrade: 1.02Grade Unit: g/tIntercept: 33.5 mView all detailsHide details
Identity
- Hole ID
- GS2647
- Project
- Golden Summit
- Commodity
- gold
- Region
- usa_ak
- Reported Region
- usa_ak
- Ticker
- FVL.TO
Geometry
- Grade
- 1.02
- Grade Unit
- g/t
- Intercept
- 33.5 m
- From
- 709.3 m
- To
- 742.8 m
- Hole Depth
- 898.2 m
- Intercept Depth
- 136.2 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- GS2647:709.3-742.8
- Mining Method
- open_pit
Location
- Easting
- 479001
- Northing
- 7215086
- Azimuth
- 360 °
- Dip
- -90 °
- Loc. Confidence
- medium
- Loc. Source
- document
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Deleterious
- Deleterious Flag
- No
Metal Equivalent
- Assumptions Disclosed
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-10-15T00:00:00.000Z
Reasoning: A moderate sub-interval of 33.5m at 1.02 g/t gold contributes to continuity in the Dolphin area, supporting the PFS.
Positive factors
- continuity_confirmed
- supports_pfs
- qaqc_disclosed
- qp_signed
Negative factors
- apparent_width_only
- infill_drilling
- grade_below_project_average
Evidence · table
“1.02”
Context: 33.5
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
GS2648Golden Summit · goldGrade: 1.67Grade Unit: g/tIntercept: 30.5 mView all detailsHide details
Identity
- Hole ID
- GS2648
- Project
- Golden Summit
- Commodity
- gold
- Region
- usa_ak
- Reported Region
- usa_ak
- Ticker
- FVL.TO
Geometry
- Grade
- 1.67
- Grade Unit
- g/t
- Intercept
- 30.5 m
- From
- 63.1 m
- To
- 93.6 m
- Hole Depth
- 630 m
- Intercept Depth
- 63.1 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- GS2648:63.1-93.6
- Mining Method
- open_pit
Location
- Easting
- 479358
- Northing
- 7215450
- Azimuth
- 360 °
- Dip
- -90 °
- Loc. Confidence
- medium
- Loc. Source
- document
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Deleterious
- Deleterious Flag
- No
Metal Equivalent
- Assumptions Disclosed
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-10-15T00:00:00.000Z
Reasoning: A near-surface intercept of 30.5m at 1.67 g/t gold supports starter pit optimization studies and confirms mineralization continuity.
Positive factors
- continuity_confirmed
- supports_pfs
- qaqc_disclosed
- qp_signed
Negative factors
- apparent_width_only
- infill_drilling
- grade_below_project_average
Evidence · table
“1.67”
Context: 30.5
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
GS2648Golden Summit · goldGrade: 2.47Grade Unit: g/tIntercept: 18 mView all detailsHide details
Identity
- Hole ID
- GS2648
- Project
- Golden Summit
- Commodity
- gold
- Region
- usa_ak
- Reported Region
- usa_ak
- Ticker
- FVL.TO
Geometry
- Grade
- 2.47
- Grade Unit
- g/t
- Intercept
- 18 m
- From
- 63.1 m
- To
- 81.1 m
- Hole Depth
- 630 m
- Intercept Depth
- 63.1 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- GS2648:63.1-81.1
- Mining Method
- open_pit
Location
- Easting
- 479358
- Northing
- 7215450
- Azimuth
- 360 °
- Dip
- -90 °
- Loc. Confidence
- medium
- Loc. Source
- document
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Deleterious
- Deleterious Flag
- No
Metal Equivalent
- Assumptions Disclosed
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-10-15T00:00:00.000Z
Reasoning: A high-grade sub-interval of 18m at 2.47 g/t gold near surface supports starter pit optimization studies and confirms mineralization continuity.
Positive factors
- high_grade_intercept
- continuity_confirmed
- supports_pfs
- qaqc_disclosed
- qp_signed
Negative factors
- apparent_width_only
- infill_drilling
- grade_below_project_average
Evidence · table
“2.47”
Context: 18
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
GS2648Golden Summit · goldGrade: 2.09Grade Unit: g/tIntercept: 5.1 mView all detailsHide details
Identity
- Hole ID
- GS2648
- Project
- Golden Summit
- Commodity
- gold
- Region
- usa_ak
- Reported Region
- usa_ak
- Ticker
- FVL.TO
Geometry
- Grade
- 2.09
- Grade Unit
- g/t
- Intercept
- 5.1 m
- From
- 118 m
- To
- 123.1 m
- Hole Depth
- 630 m
- Intercept Depth
- 63.1 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- GS2648:118-123.1
- Mining Method
- open_pit
Location
- Easting
- 479358
- Northing
- 7215450
- Azimuth
- 360 °
- Dip
- -90 °
- Loc. Confidence
- medium
- Loc. Source
- document
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Deleterious
- Deleterious Flag
- No
Metal Equivalent
- Assumptions Disclosed
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-10-15T00:00:00.000Z
Reasoning: A narrow intercept of 5.1m at 2.09 g/t gold contributes to confirming mineralization continuity for the PFS.
Positive factors
- continuity_confirmed
- supports_pfs
- qaqc_disclosed
- qp_signed
Negative factors
- apparent_width_only
- infill_drilling
- grade_below_project_average
Evidence · table
“2.09”
Context: 5.1
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
GS2648Golden Summit · goldGrade: 0.68Grade Unit: g/tIntercept: 18.6 mView all detailsHide details
Identity
- Hole ID
- GS2648
- Project
- Golden Summit
- Commodity
- gold
- Region
- usa_ak
- Reported Region
- usa_ak
- Ticker
- FVL.TO
Geometry
- Grade
- 0.68
- Grade Unit
- g/t
- Intercept
- 18.6 m
- From
- 163.4 m
- To
- 182 m
- Hole Depth
- 630 m
- Intercept Depth
- 63.1 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- GS2648:163.4-182
- Mining Method
- open_pit
Location
- Easting
- 479358
- Northing
- 7215450
- Azimuth
- 360 °
- Dip
- -90 °
- Loc. Confidence
- medium
- Loc. Source
- document
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Deleterious
- Deleterious Flag
- No
Metal Equivalent
- Assumptions Disclosed
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-10-15T00:00:00.000Z
Reasoning: A moderate intercept of 18.6m at 0.68 g/t gold contributes to confirming mineralization continuity for the PFS.
Positive factors
- continuity_confirmed
- supports_pfs
- qaqc_disclosed
- qp_signed
Negative factors
- apparent_width_only
- infill_drilling
- grade_below_project_average
Evidence · table
“0.68”
Context: 18.6
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
GS2648Golden Summit · goldGrade: 0.82Grade Unit: g/tIntercept: 18.1 mView all detailsHide details
Identity
- Hole ID
- GS2648
- Project
- Golden Summit
- Commodity
- gold
- Region
- usa_ak
- Reported Region
- usa_ak
- Ticker
- FVL.TO
Geometry
- Grade
- 0.82
- Grade Unit
- g/t
- Intercept
- 18.1 m
- From
- 227.7 m
- To
- 245.8 m
- Hole Depth
- 630 m
- Intercept Depth
- 63.1 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- GS2648:227.7-245.8
- Mining Method
- open_pit
Location
- Easting
- 479358
- Northing
- 7215450
- Azimuth
- 360 °
- Dip
- -90 °
- Loc. Confidence
- medium
- Loc. Source
- document
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Deleterious
- Deleterious Flag
- No
Metal Equivalent
- Assumptions Disclosed
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-10-15T00:00:00.000Z
Reasoning: A moderate intercept of 18.1m at 0.82 g/t gold contributes to confirming mineralization continuity for the PFS.
Positive factors
- continuity_confirmed
- supports_pfs
- qaqc_disclosed
- qp_signed
Negative factors
- apparent_width_only
- infill_drilling
- grade_below_project_average
Evidence · table
“0.82”
Context: 18.1
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
GS2648Golden Summit · goldGrade: 0.74Grade Unit: g/tIntercept: 10.5 mView all detailsHide details
Identity
- Hole ID
- GS2648
- Project
- Golden Summit
- Commodity
- gold
- Region
- usa_ak
- Reported Region
- usa_ak
- Ticker
- FVL.TO
Geometry
- Grade
- 0.74
- Grade Unit
- g/t
- Intercept
- 10.5 m
- From
- 296.4 m
- To
- 306.9 m
- Hole Depth
- 630 m
- Intercept Depth
- 63.1 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- GS2648:296.4-306.9
- Mining Method
- open_pit
Location
- Easting
- 479358
- Northing
- 7215450
- Azimuth
- 360 °
- Dip
- -90 °
- Loc. Confidence
- medium
- Loc. Source
- document
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Deleterious
- Deleterious Flag
- No
Metal Equivalent
- Assumptions Disclosed
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-10-15T00:00:00.000Z
Reasoning: A narrow intercept of 10.5m at 0.74 g/t gold contributes to confirming mineralization continuity for the PFS.
Positive factors
- continuity_confirmed
- supports_pfs
- qaqc_disclosed
- qp_signed
Negative factors
- apparent_width_only
- infill_drilling
- grade_below_project_average
Evidence · table
“0.74”
Context: 10.5
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
GS2648Golden Summit · goldGrade: 0.89Grade Unit: g/tIntercept: 149.7 mView all detailsHide details
Identity
- Hole ID
- GS2648
- Project
- Golden Summit
- Commodity
- gold
- Region
- usa_ak
- Reported Region
- usa_ak
- Ticker
- FVL.TO
Geometry
- Grade
- 0.89
- Grade Unit
- g/t
- Intercept
- 149.7 m
- From
- 343.2 m
- To
- 492.9 m
- Hole Depth
- 630 m
- Intercept Depth
- 63.1 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- GS2648:343.2-492.9
- Mining Method
- open_pit
Location
- Easting
- 479358
- Northing
- 7215450
- Azimuth
- 360 °
- Dip
- -90 °
- Loc. Confidence
- medium
- Loc. Source
- document
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Deleterious
- Deleterious Flag
- No
Metal Equivalent
- Assumptions Disclosed
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-10-15T00:00:00.000Z
Reasoning: A long intercept of 149.7m at 0.89 g/t gold in the Dolphin area confirms mineralization continuity, supporting the PFS.
Positive factors
- long_intercept_width
- continuity_confirmed
- supports_pfs
- qaqc_disclosed
- qp_signed
Negative factors
- apparent_width_only
- infill_drilling
- grade_below_project_average
Evidence · table
“0.89”
Context: 149.7
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
GS2648Golden Summit · goldGrade: 1.11Grade Unit: g/tIntercept: 79.3 mView all detailsHide details
Identity
- Hole ID
- GS2648
- Project
- Golden Summit
- Commodity
- gold
- Region
- usa_ak
- Reported Region
- usa_ak
- Ticker
- FVL.TO
Geometry
- Grade
- 1.11
- Grade Unit
- g/t
- Intercept
- 79.3 m
- From
- 377 m
- To
- 456.3 m
- Hole Depth
- 630 m
- Intercept Depth
- 63.1 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- GS2648:377-456.3
- Mining Method
- open_pit
Location
- Easting
- 479358
- Northing
- 7215450
- Azimuth
- 360 °
- Dip
- -90 °
- Loc. Confidence
- medium
- Loc. Source
- document
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Deleterious
- Deleterious Flag
- No
Metal Equivalent
- Assumptions Disclosed
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-10-15T00:00:00.000Z
Reasoning: A long sub-interval of 79.3m at 1.11 g/t gold within a broader zone confirms mineralization continuity, supporting the PFS.
Positive factors
- long_intercept_width
- continuity_confirmed
- supports_pfs
- qaqc_disclosed
- qp_signed
Negative factors
- apparent_width_only
- infill_drilling
- grade_below_project_average
Evidence · table
“1.11”
Context: 79.3
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
GS2656Golden Summit · goldGrade: 1.89Grade Unit: g/tIntercept: 5.9 mView all detailsHide details
Identity
- Hole ID
- GS2656
- Project
- Golden Summit
- Commodity
- gold
- Region
- usa_ak
- Reported Region
- usa_ak
- Ticker
- FVL.TO
Geometry
- Grade
- 1.89
- Grade Unit
- g/t
- Intercept
- 5.9 m
- From
- 111.1 m
- To
- 117 m
- Hole Depth
- 758 m
- Intercept Depth
- 111.1 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- GS2656:111.1-117
- Mining Method
- open_pit
Location
- Easting
- 478898
- Northing
- 7215339
- Azimuth
- 360 °
- Dip
- -90 °
- Loc. Confidence
- medium
- Loc. Source
- document
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Deleterious
- Deleterious Flag
- No
Metal Equivalent
- Assumptions Disclosed
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-10-15T00:00:00.000Z
Reasoning: A narrow intercept of 5.9m at 1.89 g/t gold contributes to confirming mineralization continuity for the PFS.
Positive factors
- continuity_confirmed
- supports_pfs
- qaqc_disclosed
- qp_signed
Negative factors
- apparent_width_only
- infill_drilling
- grade_below_project_average
Evidence · table
“1.89”
Context: 5.9
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
GS2656Golden Summit · goldGrade: 1.88Grade Unit: g/tIntercept: 3.5 mView all detailsHide details
Identity
- Hole ID
- GS2656
- Project
- Golden Summit
- Commodity
- gold
- Region
- usa_ak
- Reported Region
- usa_ak
- Ticker
- FVL.TO
Geometry
- Grade
- 1.88
- Grade Unit
- g/t
- Intercept
- 3.5 m
- From
- 139 m
- To
- 142.5 m
- Hole Depth
- 758 m
- Intercept Depth
- 111.1 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- GS2656:139-142.5
- Mining Method
- open_pit
Location
- Easting
- 478898
- Northing
- 7215339
- Azimuth
- 360 °
- Dip
- -90 °
- Loc. Confidence
- medium
- Loc. Source
- document
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Deleterious
- Deleterious Flag
- No
Metal Equivalent
- Assumptions Disclosed
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-10-15T00:00:00.000Z
Reasoning: A narrow intercept of 3.5m at 1.88 g/t gold contributes to confirming mineralization continuity for the PFS.
Positive factors
- continuity_confirmed
- supports_pfs
- qaqc_disclosed
- qp_signed
Negative factors
- apparent_width_only
- infill_drilling
- grade_below_project_average
Evidence · table
“1.88”
Context: 3.5
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
GS2656Golden Summit · goldGrade: 1.23Grade Unit: g/tIntercept: 19.6 mView all detailsHide details
Identity
- Hole ID
- GS2656
- Project
- Golden Summit
- Commodity
- gold
- Region
- usa_ak
- Reported Region
- usa_ak
- Ticker
- FVL.TO
Geometry
- Grade
- 1.23
- Grade Unit
- g/t
- Intercept
- 19.6 m
- From
- 203 m
- To
- 222.6 m
- Hole Depth
- 758 m
- Intercept Depth
- 111.1 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- GS2656:203-222.6
- Mining Method
- open_pit
Location
- Easting
- 478898
- Northing
- 7215339
- Azimuth
- 360 °
- Dip
- -90 °
- Loc. Confidence
- medium
- Loc. Source
- document
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Deleterious
- Deleterious Flag
- No
Metal Equivalent
- Assumptions Disclosed
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-10-15T00:00:00.000Z
Reasoning: A moderate intercept of 19.6m at 1.23 g/t gold contributes to confirming mineralization continuity for the PFS.
Positive factors
- continuity_confirmed
- supports_pfs
- qaqc_disclosed
- qp_signed
Negative factors
- apparent_width_only
- infill_drilling
- grade_below_project_average
Evidence · table
“1.23”
Context: 19.6
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
GS2656Golden Summit · goldGrade: 0.79Grade Unit: g/tIntercept: 70.3 mView all detailsHide details
Identity
- Hole ID
- GS2656
- Project
- Golden Summit
- Commodity
- gold
- Region
- usa_ak
- Reported Region
- usa_ak
- Ticker
- FVL.TO
Geometry
- Grade
- 0.79
- Grade Unit
- g/t
- Intercept
- 70.3 m
- From
- 236 m
- To
- 306.3 m
- Hole Depth
- 758 m
- Intercept Depth
- 111.1 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- GS2656:236-306.3
- Mining Method
- open_pit
Location
- Easting
- 478898
- Northing
- 7215339
- Azimuth
- 360 °
- Dip
- -90 °
- Loc. Confidence
- medium
- Loc. Source
- document
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Deleterious
- Deleterious Flag
- No
Metal Equivalent
- Assumptions Disclosed
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-10-15T00:00:00.000Z
Reasoning: A long intercept of 70.3m at 0.79 g/t gold confirms continuity in the Dolphin area, supporting the PFS, though the grade is below the project average.
Positive factors
- long_intercept_width
- continuity_confirmed
- supports_pfs
- qaqc_disclosed
- qp_signed
Negative factors
- apparent_width_only
- infill_drilling
- grade_below_project_average
Evidence · table
“0.79”
Context: 70.3
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
GS2656Golden Summit · goldGrade: 2.85Grade Unit: g/tIntercept: 6 mView all detailsHide details
Identity
- Hole ID
- GS2656
- Project
- Golden Summit
- Commodity
- gold
- Region
- usa_ak
- Reported Region
- usa_ak
- Ticker
- FVL.TO
Geometry
- Grade
- 2.85
- Grade Unit
- g/t
- Intercept
- 6 m
- From
- 236 m
- To
- 242 m
- Hole Depth
- 758 m
- Intercept Depth
- 111.1 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- GS2656:236-242
- Mining Method
- open_pit
Location
- Easting
- 478898
- Northing
- 7215339
- Azimuth
- 360 °
- Dip
- -90 °
- Loc. Confidence
- medium
- Loc. Source
- document
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Deleterious
- Deleterious Flag
- No
Metal Equivalent
- Assumptions Disclosed
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-10-15T00:00:00.000Z
Reasoning: A high-grade sub-interval of 6.0m at 2.85 g/t gold within a broader zone contributes to confirming mineralization continuity for the PFS.
Positive factors
- high_grade_intercept
- continuity_confirmed
- supports_pfs
- qaqc_disclosed
- qp_signed
Negative factors
- apparent_width_only
- infill_drilling
- grade_below_project_average
Evidence · table
“2.85”
Context: 6.0
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
GS2656Golden Summit · goldGrade: 1.24Grade Unit: g/tIntercept: 213 mView all detailsHide details
Identity
- Hole ID
- GS2656
- Project
- Golden Summit
- Commodity
- gold
- Region
- usa_ak
- Reported Region
- usa_ak
- Ticker
- FVL.TO
Geometry
- Grade
- 1.24
- Grade Unit
- g/t
- Intercept
- 213 m
- From
- 422 m
- To
- 635 m
- Hole Depth
- 758 m
- Intercept Depth
- 111.1 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- GS2656:422-635
- Mining Method
- open_pit
Location
- Easting
- 478898
- Northing
- 7215339
- Azimuth
- 360 °
- Dip
- -90 °
- Loc. Confidence
- medium
- Loc. Source
- document
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Deleterious
- Deleterious Flag
- No
Metal Equivalent
- Assumptions Disclosed
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-10-15T00:00:00.000Z
Reasoning: An exceptionally long intercept of 213m at 1.24 g/t gold confirms broad mineralization continuity in the Dolphin area, providing significant data for the PFS.
Positive factors
- long_intercept_width
- strong_grade_x_width
- continuity_confirmed
- supports_pfs
- qaqc_disclosed
- qp_signed
Negative factors
- apparent_width_only
- infill_drilling
- grade_below_project_average
Evidence · table
“1.24”
Context: 213.0
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
GS2656Golden Summit · goldGrade: 5.77Grade Unit: g/tIntercept: 21 mView all detailsHide details
Identity
- Hole ID
- GS2656
- Project
- Golden Summit
- Commodity
- gold
- Region
- usa_ak
- Reported Region
- usa_ak
- Ticker
- FVL.TO
Geometry
- Grade
- 5.77
- Grade Unit
- g/t
- Intercept
- 21 m
- From
- 467 m
- To
- 488 m
- Hole Depth
- 758 m
- Intercept Depth
- 111.1 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- GS2656:467-488
- Mining Method
- open_pit
Location
- Easting
- 478898
- Northing
- 7215339
- Azimuth
- 360 °
- Dip
- -90 °
- Loc. Confidence
- medium
- Loc. Source
- document
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Deleterious
- Deleterious Flag
- No
Metal Equivalent
- Assumptions Disclosed
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-10-15T00:00:00.000Z
Reasoning: A high-grade sub-interval of 21m at 5.77 g/t gold within a broader zone is a significant result, confirming higher-grade corridors and supporting the PFS.
Positive factors
- high_grade_intercept
- strong_grade_x_width
- continuity_confirmed
- supports_pfs
- qaqc_disclosed
- qp_signed
Negative factors
- apparent_width_only
- infill_drilling
Evidence · table
“5.77”
Context: 21
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
GS2656Golden Summit · goldGrade: 32.7Grade Unit: g/tIntercept: 3 mView all detailsHide details
Identity
- Hole ID
- GS2656
- Project
- Golden Summit
- Commodity
- gold
- Region
- usa_ak
- Reported Region
- usa_ak
- Ticker
- FVL.TO
Geometry
- Grade
- 32.7
- Grade Unit
- g/t
- Intercept
- 3 m
- From
- 482 m
- To
- 485 m
- Hole Depth
- 758 m
- Intercept Depth
- 111.1 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- GS2656:482-485
- Mining Method
- open_pit
Location
- Easting
- 478898
- Northing
- 7215339
- Azimuth
- 360 °
- Dip
- -90 °
- Loc. Confidence
- medium
- Loc. Source
- document
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Deleterious
- Deleterious Flag
- No
Metal Equivalent
- Assumptions Disclosed
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-10-15T00:00:00.000Z
Reasoning: A bonanza-grade sub-interval of 3.0m at 32.7 g/t gold is a highly significant result, confirming very high-grade mineralization within the Dolphin area and supporting the PFS.
Positive factors
- bonanza_intercept
- high_grade_intercept
- strong_grade_x_width
- continuity_confirmed
- supports_pfs
- qaqc_disclosed
- qp_signed
Negative factors
- apparent_width_only
- infill_drilling
Evidence · table
“32.7”
Context: 3.0
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
GS2656Golden Summit · goldGrade: 1.2Grade Unit: g/tIntercept: 11.7 mView all detailsHide details
Identity
- Hole ID
- GS2656
- Project
- Golden Summit
- Commodity
- gold
- Region
- usa_ak
- Reported Region
- usa_ak
- Ticker
- FVL.TO
Geometry
- Grade
- 1.2
- Grade Unit
- g/t
- Intercept
- 11.7 m
- From
- 515 m
- To
- 526.7 m
- Hole Depth
- 758 m
- Intercept Depth
- 111.1 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- GS2656:515-526.7
- Mining Method
- open_pit
Location
- Easting
- 478898
- Northing
- 7215339
- Azimuth
- 360 °
- Dip
- -90 °
- Loc. Confidence
- medium
- Loc. Source
- document
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Deleterious
- Deleterious Flag
- No
Metal Equivalent
- Assumptions Disclosed
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-10-15T00:00:00.000Z
Reasoning: A moderate sub-interval of 11.7m at 1.20 g/t gold contributes to confirming mineralization continuity for the PFS.
Positive factors
- continuity_confirmed
- supports_pfs
- qaqc_disclosed
- qp_signed
Negative factors
- apparent_width_only
- infill_drilling
- grade_below_project_average
Evidence · table
“1.20”
Context: 11.7
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
GS2656Golden Summit · goldGrade: 3.29Grade Unit: g/tIntercept: 6 mView all detailsHide details
Identity
- Hole ID
- GS2656
- Project
- Golden Summit
- Commodity
- gold
- Region
- usa_ak
- Reported Region
- usa_ak
- Ticker
- FVL.TO
Geometry
- Grade
- 3.29
- Grade Unit
- g/t
- Intercept
- 6 m
- From
- 539 m
- To
- 545 m
- Hole Depth
- 758 m
- Intercept Depth
- 111.1 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- GS2656:539-545
- Mining Method
- open_pit
Location
- Easting
- 478898
- Northing
- 7215339
- Azimuth
- 360 °
- Dip
- -90 °
- Loc. Confidence
- medium
- Loc. Source
- document
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Deleterious
- Deleterious Flag
- No
Metal Equivalent
- Assumptions Disclosed
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-10-15T00:00:00.000Z
Reasoning: A high-grade sub-interval of 6.0m at 3.29 g/t gold within a broader zone contributes to confirming mineralization continuity for the PFS.
Positive factors
- high_grade_intercept
- continuity_confirmed
- supports_pfs
- qaqc_disclosed
- qp_signed
Negative factors
- apparent_width_only
- infill_drilling
- grade_below_project_average
Evidence · table
“3.29”
Context: 6.0
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
GS2656Golden Summit · goldGrade: 1.26Grade Unit: g/tIntercept: 18.9 mView all detailsHide details
Identity
- Hole ID
- GS2656
- Project
- Golden Summit
- Commodity
- gold
- Region
- usa_ak
- Reported Region
- usa_ak
- Ticker
- FVL.TO
Geometry
- Grade
- 1.26
- Grade Unit
- g/t
- Intercept
- 18.9 m
- From
- 562.9 m
- To
- 581.8 m
- Hole Depth
- 758 m
- Intercept Depth
- 111.1 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- GS2656:562.9-581.8
- Mining Method
- open_pit
Location
- Easting
- 478898
- Northing
- 7215339
- Azimuth
- 360 °
- Dip
- -90 °
- Loc. Confidence
- medium
- Loc. Source
- document
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Deleterious
- Deleterious Flag
- No
Metal Equivalent
- Assumptions Disclosed
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-10-15T00:00:00.000Z
Reasoning: A moderate sub-interval of 18.9m at 1.26 g/t gold contributes to confirming mineralization continuity for the PFS.
Positive factors
- continuity_confirmed
- supports_pfs
- qaqc_disclosed
- qp_signed
Negative factors
- apparent_width_only
- infill_drilling
- grade_below_project_average
Evidence · table
“1.26”
Context: 18.9
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
GS2656Golden Summit · goldGrade: 1.05Grade Unit: g/tIntercept: 39 mView all detailsHide details
Identity
- Hole ID
- GS2656
- Project
- Golden Summit
- Commodity
- gold
- Region
- usa_ak
- Reported Region
- usa_ak
- Ticker
- FVL.TO
Geometry
- Grade
- 1.05
- Grade Unit
- g/t
- Intercept
- 39 m
- From
- 596 m
- To
- 635 m
- Hole Depth
- 758 m
- Intercept Depth
- 111.1 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- GS2656:596-635
- Mining Method
- open_pit
Location
- Easting
- 478898
- Northing
- 7215339
- Azimuth
- 360 °
- Dip
- -90 °
- Loc. Confidence
- medium
- Loc. Source
- document
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Deleterious
- Deleterious Flag
- No
Metal Equivalent
- Assumptions Disclosed
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-10-15T00:00:00.000Z
Reasoning: A long sub-interval of 39.0m at 1.05 g/t gold contributes to confirming mineralization continuity for the PFS.
Positive factors
- long_intercept_width
- continuity_confirmed
- supports_pfs
- qaqc_disclosed
- qp_signed
Negative factors
- apparent_width_only
- infill_drilling
- grade_below_project_average
Evidence · table
“1.05”
Context: 39.0
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
GS2644Golden Summit · goldGrade: 0.97Grade Unit: g/tIntercept: 9.1 mView all detailsHide details
Identity
- Hole ID
- GS2644
- Project
- Golden Summit
- Commodity
- gold
- Region
- usa_ak
- Reported Region
- usa_ak
- Ticker
- FVL.TO
Geometry
- Grade
- 0.97
- Grade Unit
- g/t
- Intercept
- 9.1 m
- From
- 160.6 m
- To
- 169.7 m
- Hole Depth
- 349.6 m
- Intercept Depth
- 160.6 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- GS2644:160.6-169.7
- Mining Method
- open_pit
Location
- Easting
- 479803
- Northing
- 7215303
- Azimuth
- 360 °
- Dip
- -90 °
- Loc. Confidence
- medium
- Loc. Source
- document
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Deleterious
- Deleterious Flag
- No
Metal Equivalent
- Assumptions Disclosed
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-10-15T00:00:00.000Z
Reasoning: A narrow intercept of 9.1m at 0.97 g/t gold in the Cleary area contributes to defining mineralization controls for the PFS.
Positive factors
- continuity_confirmed
- supports_pfs
- qaqc_disclosed
- qp_signed
Negative factors
- apparent_width_only
- infill_drilling
- grade_below_project_average
Evidence · table
“0.97”
Context: 9.1
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
GS2644Golden Summit · goldGrade: 1.03Grade Unit: g/tIntercept: 17.9 mView all detailsHide details
Identity
- Hole ID
- GS2644
- Project
- Golden Summit
- Commodity
- gold
- Region
- usa_ak
- Reported Region
- usa_ak
- Ticker
- FVL.TO
Geometry
- Grade
- 1.03
- Grade Unit
- g/t
- Intercept
- 17.9 m
- From
- 252.1 m
- To
- 270 m
- Hole Depth
- 349.6 m
- Intercept Depth
- 160.6 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- GS2644:252.1-270
- Mining Method
- open_pit
Location
- Easting
- 479803
- Northing
- 7215303
- Azimuth
- 360 °
- Dip
- -90 °
- Loc. Confidence
- medium
- Loc. Source
- document
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Deleterious
- Deleterious Flag
- No
Metal Equivalent
- Assumptions Disclosed
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-10-15T00:00:00.000Z
Reasoning: A moderate intercept of 17.9m at 1.03 g/t gold in the Cleary area contributes to defining mineralization controls for the PFS.
Positive factors
- continuity_confirmed
- supports_pfs
- qaqc_disclosed
- qp_signed
Negative factors
- apparent_width_only
- infill_drilling
- grade_below_project_average
Evidence · table
“1.03”
Context: 17.9
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
GS2644Golden Summit · goldGrade: 1.01Grade Unit: g/tIntercept: 7.1 mView all detailsHide details
Identity
- Hole ID
- GS2644
- Project
- Golden Summit
- Commodity
- gold
- Region
- usa_ak
- Reported Region
- usa_ak
- Ticker
- FVL.TO
Geometry
- Grade
- 1.01
- Grade Unit
- g/t
- Intercept
- 7.1 m
- From
- 315.1 m
- To
- 322.2 m
- Hole Depth
- 349.6 m
- Intercept Depth
- 160.6 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- GS2644:315.1-322.2
- Mining Method
- open_pit
Location
- Easting
- 479803
- Northing
- 7215303
- Azimuth
- 360 °
- Dip
- -90 °
- Loc. Confidence
- medium
- Loc. Source
- document
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Deleterious
- Deleterious Flag
- No
Metal Equivalent
- Assumptions Disclosed
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-10-15T00:00:00.000Z
Reasoning: A narrow intercept of 7.1m at 1.01 g/t gold in the Cleary area contributes to defining mineralization controls for the PFS.
Positive factors
- continuity_confirmed
- supports_pfs
- qaqc_disclosed
- qp_signed
Negative factors
- apparent_width_only
- infill_drilling
- grade_below_project_average
Evidence · table
“1.01”
Context: 7.1
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
GS2652Golden Summit · goldGrade: 2.1Grade Unit: g/tIntercept: 9.1 mView all detailsHide details
Identity
- Hole ID
- GS2652
- Project
- Golden Summit
- Commodity
- gold
- Region
- usa_ak
- Reported Region
- usa_ak
- Ticker
- FVL.TO
Geometry
- Grade
- 2.1
- Grade Unit
- g/t
- Intercept
- 9.1 m
- From
- 270.4 m
- To
- 279.5 m
- Hole Depth
- 346.6 m
- Intercept Depth
- 270.4 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- GS2652:270.4-279.5
- Mining Method
- open_pit
Location
- Easting
- 479754
- Northing
- 7215281
- Azimuth
- 360 °
- Dip
- -75 °
- Loc. Confidence
- medium
- Loc. Source
- document
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Deleterious
- Deleterious Flag
- No
Metal Equivalent
- Assumptions Disclosed
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-10-15T00:00:00.000Z
Reasoning: A narrow intercept of 9.1m at 2.1 g/t gold in the Cleary area contributes to defining mineralization controls for the PFS.
Positive factors
- continuity_confirmed
- supports_pfs
- qaqc_disclosed
- qp_signed
Negative factors
- apparent_width_only
- infill_drilling
- grade_below_project_average
Evidence · table
“2.1”
Context: 9.1
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
GS2642Golden Summit · goldGrade: 1.81Grade Unit: g/tIntercept: 5.5 mView all detailsHide details
Identity
- Hole ID
- GS2642
- Project
- Golden Summit
- Commodity
- gold
- Region
- usa_ak
- Reported Region
- usa_ak
- Ticker
- FVL.TO
Geometry
- Grade
- 1.81
- Grade Unit
- g/t
- Intercept
- 5.5 m
- From
- 70.2 m
- To
- 75.7 m
- Hole Depth
- 209 m
- Intercept Depth
- 70.2 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- GS2642:70.2-75.7
- Mining Method
- open_pit
Location
- Easting
- 479255
- Northing
- 7215624
- Azimuth
- 360 °
- Dip
- -75 °
- Loc. Confidence
- medium
- Loc. Source
- document
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Deleterious
- Deleterious Flag
- No
Metal Equivalent
- Assumptions Disclosed
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-10-15T00:00:00.000Z
Reasoning: A narrow intercept of 5.5m at 1.81 g/t gold from a condemnation hole helps define the limits of the system.
Positive factors
- continuity_confirmed
- supports_pfs
- qaqc_disclosed
- qp_signed
Negative factors
- apparent_width_only
- infill_drilling
- grade_below_project_average
Evidence · table
“1.81”
Context: 5.5
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
GS2643Golden Summit · goldGrade: 3.45Grade Unit: g/tIntercept: 3 mView all detailsHide details
Identity
- Hole ID
- GS2643
- Project
- Golden Summit
- Commodity
- gold
- Region
- usa_ak
- Reported Region
- usa_ak
- Ticker
- FVL.TO
Geometry
- Grade
- 3.45
- Grade Unit
- g/t
- Intercept
- 3 m
- From
- 134 m
- To
- 137 m
- Hole Depth
- 281.6 m
- Intercept Depth
- 134 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- GS2643:134-137
- Mining Method
- open_pit
Location
- Easting
- 479154
- Northing
- 7215742
- Azimuth
- 360 °
- Dip
- -75 °
- Loc. Confidence
- medium
- Loc. Source
- document
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Deleterious
- Deleterious Flag
- No
Metal Equivalent
- Assumptions Disclosed
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-10-15T00:00:00.000Z
Reasoning: A narrow, high-grade intercept of 3.0m at 3.45 g/t gold from a condemnation hole helps define the limits of the system.
Positive factors
- high_grade_intercept
- continuity_confirmed
- supports_pfs
- qaqc_disclosed
- qp_signed
Negative factors
- apparent_width_only
- infill_drilling
- grade_below_project_average
Evidence · table
“3.45”
Context: 3
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
GS2643Golden Summit · goldGrade: 0.96Grade Unit: g/tIntercept: 5.8 mView all detailsHide details
Identity
- Hole ID
- GS2643
- Project
- Golden Summit
- Commodity
- gold
- Region
- usa_ak
- Reported Region
- usa_ak
- Ticker
- FVL.TO
Geometry
- Grade
- 0.96
- Grade Unit
- g/t
- Intercept
- 5.8 m
- From
- 161 m
- To
- 166.8 m
- Hole Depth
- 281.6 m
- Intercept Depth
- 134 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- GS2643:161-166.8
- Mining Method
- open_pit
Location
- Easting
- 479154
- Northing
- 7215742
- Azimuth
- 360 °
- Dip
- -75 °
- Loc. Confidence
- medium
- Loc. Source
- document
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Deleterious
- Deleterious Flag
- No
Metal Equivalent
- Assumptions Disclosed
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-10-15T00:00:00.000Z
Reasoning: A narrow intercept of 5.8m at 0.96 g/t gold from a condemnation hole helps define the limits of the system.
Positive factors
- continuity_confirmed
- supports_pfs
- qaqc_disclosed
- qp_signed
Negative factors
- apparent_width_only
- infill_drilling
- grade_below_project_average
Evidence · table
“0.96”
Context: 5.8
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
GS2645Golden Summit · goldGrade: 0.85Grade Unit: g/tIntercept: 4.1 mView all detailsHide details
Identity
- Hole ID
- GS2645
- Project
- Golden Summit
- Commodity
- gold
- Region
- usa_ak
- Reported Region
- usa_ak
- Ticker
- FVL.TO
Geometry
- Grade
- 0.85
- Grade Unit
- g/t
- Intercept
- 4.1 m
- From
- 20 m
- To
- 24.1 m
- Hole Depth
- 425 m
- Intercept Depth
- 20 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- GS2645:20-24.1
- Mining Method
- open_pit
Location
- Easting
- 479200
- Northing
- 7215703
- Azimuth
- 360 °
- Dip
- -75 °
- Loc. Confidence
- medium
- Loc. Source
- document
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Deleterious
- Deleterious Flag
- No
Metal Equivalent
- Assumptions Disclosed
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-10-15T00:00:00.000Z
Reasoning: A narrow intercept of 4.1m at 0.85 g/t gold from a condemnation hole helps define the limits of the system.
Positive factors
- continuity_confirmed
- supports_pfs
- qaqc_disclosed
- qp_signed
Negative factors
- apparent_width_only
- infill_drilling
- grade_below_project_average
Evidence · table
“0.85”
Context: 4.1
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
GS2645Golden Summit · goldGrade: 1.12Grade Unit: g/tIntercept: 10.4 mView all detailsHide details
Identity
- Hole ID
- GS2645
- Project
- Golden Summit
- Commodity
- gold
- Region
- usa_ak
- Reported Region
- usa_ak
- Ticker
- FVL.TO
Geometry
- Grade
- 1.12
- Grade Unit
- g/t
- Intercept
- 10.4 m
- From
- 51.1 m
- To
- 61.5 m
- Hole Depth
- 425 m
- Intercept Depth
- 20 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- GS2645:51.1-61.5
- Mining Method
- open_pit
Location
- Easting
- 479200
- Northing
- 7215703
- Azimuth
- 360 °
- Dip
- -75 °
- Loc. Confidence
- medium
- Loc. Source
- document
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Deleterious
- Deleterious Flag
- No
Metal Equivalent
- Assumptions Disclosed
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-10-15T00:00:00.000Z
Reasoning: A narrow intercept of 10.4m at 1.12 g/t gold from a condemnation hole helps define the limits of the system.
Positive factors
- continuity_confirmed
- supports_pfs
- qaqc_disclosed
- qp_signed
Negative factors
- apparent_width_only
- infill_drilling
- grade_below_project_average
Evidence · table
“1.12”
Context: 10.4
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
GS2645Golden Summit · goldGrade: 2.55Grade Unit: g/tIntercept: 6 mView all detailsHide details
Identity
- Hole ID
- GS2645
- Project
- Golden Summit
- Commodity
- gold
- Region
- usa_ak
- Reported Region
- usa_ak
- Ticker
- FVL.TO
Geometry
- Grade
- 2.55
- Grade Unit
- g/t
- Intercept
- 6 m
- From
- 140 m
- To
- 146 m
- Hole Depth
- 425 m
- Intercept Depth
- 20 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- GS2645:140-146
- Mining Method
- open_pit
Location
- Easting
- 479200
- Northing
- 7215703
- Azimuth
- 360 °
- Dip
- -75 °
- Loc. Confidence
- medium
- Loc. Source
- document
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Deleterious
- Deleterious Flag
- No
Metal Equivalent
- Assumptions Disclosed
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-10-15T00:00:00.000Z
Reasoning: A narrow, high-grade intercept of 6.0m at 2.55 g/t gold from a condemnation hole helps define the limits of the system.
Positive factors
- high_grade_intercept
- continuity_confirmed
- supports_pfs
- qaqc_disclosed
- qp_signed
Negative factors
- apparent_width_only
- infill_drilling
- grade_below_project_average
Evidence · table
“2.55”
Context: 6
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
How Atlas produces this analysis
Minestarters Atlas uses automated extraction to summarize mining announcements, identify reported measurements, and classify supporting evidence. Sentiment reflects the extracted narrative and classification rules; it is an interpretation, not a reported measurement. Evidence quotes and context are provided where available. Missing data, low-confidence results, and review flags indicate limitations. Check the original publisher announcement before relying on an interpretation.