Freegold drills 1.24 g/t Au over 213m including 21m of 5.77 g/t Au at Golden Summit
Original announcement by investingnews on
- Company
- Freegold Limited
- Ticker
- FVL
- Exchange
- TSX
- Region
- Unavailable
- Primary commodity
- Gold
- Secondary commodities
- None reported
- Document categories
- Drill results, Other, Resource update
- Extracted
- 2026-10-15 15:07:04 UTC
Analysis by Minestarters Atlas
Atlas analysis published:
Minestarters Atlas analysis
Summary
Freegold Limited announced significant gold drill results from its Golden Summit project in Alaska, highlighted by 213.0 meters at 1.24 g/t Au including 21 meters at 5.77 g/t Au in hole GS2656. These new intercepts, part of the 2026 drill program, confirm the continuity of mineralization and are consistent with the project's resource model. The company is advancing a Pre-Feasibility Study focused on a smaller starter pit with near-surface oxide resources to optimize project economics and accelerate cash flow.
Reasoning: Freegold's latest drill results from the Golden Summit project demonstrate significant gold intercepts, including high-grade zones, which confirm the existing resource model and provide a strong basis for the ongoing Pre-Feasibility Study. The long, continuous mineralization supports the project's bulk tonnage potential and strategic development towards a starter pit.
Positive factors
- Long, continuous gold mineralization
- High-grade intercepts within broader zones
- Infill drilling confirming resource model
- Near-surface mineralization supporting starter pit optimization
- Advancement towards Pre-Feasibility Study (PFS)
- QA/QC disclosed
Negative factors
- True width not determined
- Cut-off grade for compositing not disclosed
Low confidence — this extraction should be reviewed alongside the original source.
Facts used in scoring: 38
Classification and evidence
Apparent Width Onlynegative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Why it applies: The release explicitly states that true width cannot be determined due to uncertain geometry of mineralization.
Evidence · text
“The widths refer to drill hole intercepts; true width cannot be determined due to the uncertain geometry of mineralization.”
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: The release details the analytical program and QA/QC procedures, including laboratory, sample preparation, assay methods, and insertion of blanks, standards, and duplicates.
Evidence · text
“Analytical Program and QA/QC HQ core is logged, photographed and cut in half using a diamond saw. One-half is placed in sealed bags for preparation and subsequent geochemical analysis by ALS facilities in Vancouver and Thunder Bay. ... The QA/QC program includes laboratory and field standards inserted every ten samples. Blanks are inserted at the start of each submittal, and at least one blank is inserted every 25 standards.”
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: The drill program includes infill holes in the Dolphin and Cleary areas to better define controls on mineralization and connect previously isolated higher-grade intercepts.
Evidence · text
“The eight drill holes in this release are from the ongoing 2026 program and include infill holes in the Dolphin and Cleary areas”
Bonanza Interceptpositive
Exceptionally high-grade zone, well above the deposit-type norm.
Why it applies: The intercept of 32.7 g/t Au over 3.0 m in hole GS2656 is exceptionally high-grade, well above the exceptional threshold for open-pit orogenic gold (>=3 g/t Au).
Evidence · table
“32.7”
Context: 3.0
Extracted facts
Stored fact records: 38. Some facts used in scoring do not have a stored record.
Drill Results (38)
GS2647Golden Summit · goldGrade: 0.98Grade Unit: g/tIntercept: 82.3 mView all detailsHide details
Identity
- Hole ID
- GS2647
- Project
- Golden Summit
- Commodity
- gold
- Region
- usa_ak
- Reported Region
- usa_ak
- Ticker
- FVL
Geometry
- Grade
- 0.98
- Grade Unit
- g/t
- Intercept
- 82.3 m
- From
- 136.2 m
- To
- 218.5 m
- Hole Depth
- 898.2 m
- Intercept Depth
- 136.2 m
Classification
- Deposit Type
- orogenic
- Program
- mixed
- Sample Type
- drill
- Group ID
- GS2647:136.2-218.5
- Mining Method
- open_pit
Location
- Easting
- 479001
- Northing
- 7215086
- Azimuth
- 360 °
- Dip
- -90 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-10-15T00:00:00.000Z
Reasoning: This intercept shows a moderate grade over a long interval, contributing to the overall continuity of mineralization and a strong GT product, supporting open-pit potential.
Positive factors
- Moderate grade
- Strong GT product
- Long intercept length
Negative factors
- Apparent width only
Evidence · table
“0.98”
Context: 82.3
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
GS2647Golden Summit · goldGrade: 0.86Grade Unit: g/tIntercept: 24.3 mView all detailsHide details
Identity
- Hole ID
- GS2647
- Project
- Golden Summit
- Commodity
- gold
- Region
- usa_ak
- Reported Region
- usa_ak
- Ticker
- FVL
Geometry
- Grade
- 0.86
- Grade Unit
- g/t
- Intercept
- 24.3 m
- From
- 242.9 m
- To
- 267.2 m
- Hole Depth
- 898.2 m
- Intercept Depth
- 136.2 m
Classification
- Deposit Type
- orogenic
- Program
- mixed
- Sample Type
- drill
- Group ID
- GS2647:242.9-267.2
- Mining Method
- open_pit
Location
- Easting
- 479001
- Northing
- 7215086
- Azimuth
- 360 °
- Dip
- -90 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-10-15T00:00:00.000Z
Reasoning: This intercept shows a moderate grade over a moderate length, contributing to the overall mineralization profile.
Positive factors
- Moderate grade
- Moderate GT product
Negative factors
- Apparent width only
Evidence · table
“0.86”
Context: 24.3
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
GS2647Golden Summit · goldGrade: 0.73Grade Unit: g/tIntercept: 375 mView all detailsHide details
Identity
- Hole ID
- GS2647
- Project
- Golden Summit
- Commodity
- gold
- Region
- usa_ak
- Reported Region
- usa_ak
- Ticker
- FVL
Geometry
- Grade
- 0.73
- Grade Unit
- g/t
- Intercept
- 375 m
- From
- 367.8 m
- To
- 742.8 m
- Hole Depth
- 898.2 m
- Intercept Depth
- 136.2 m
Classification
- Deposit Type
- orogenic
- Program
- mixed
- Sample Type
- drill
- Group ID
- GS2647:367.8-742.8
- Mining Method
- open_pit
Location
- Easting
- 479001
- Northing
- 7215086
- Azimuth
- 360 °
- Dip
- -90 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-10-15T00:00:00.000Z
Reasoning: This very long intercept with a moderate grade demonstrates broad continuity of mineralization, yielding a strong GT product, which is positive for bulk tonnage potential.
Positive factors
- Moderate grade
- Strong GT product
- Very long intercept length
Negative factors
- Apparent width only
Evidence · table
“0.73”
Context: 375
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
GS2647Golden Summit · goldGrade: 0.84Grade Unit: g/tIntercept: 37.8 mView all detailsHide details
Identity
- Hole ID
- GS2647
- Project
- Golden Summit
- Commodity
- gold
- Region
- usa_ak
- Reported Region
- usa_ak
- Ticker
- FVL
Geometry
- Grade
- 0.84
- Grade Unit
- g/t
- Intercept
- 37.8 m
- From
- 388 m
- To
- 425.8 m
- Hole Depth
- 898.2 m
- Intercept Depth
- 136.2 m
Classification
- Deposit Type
- orogenic
- Program
- mixed
- Sample Type
- drill
- Group ID
- GS2647:388-425.8
- Mining Method
- open_pit
Location
- Easting
- 479001
- Northing
- 7215086
- Azimuth
- 360 °
- Dip
- -90 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-10-15T00:00:00.000Z
Reasoning: This sub-interval within a broader zone shows a moderate grade over a moderate length, contributing to the overall mineralization.
Positive factors
- Moderate grade
- Moderate GT product
Negative factors
- Apparent width only
Evidence · table
“0.84”
Context: 37.8
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
GS2647Golden Summit · goldGrade: 0.84Grade Unit: g/tIntercept: 112.8 mView all detailsHide details
Identity
- Hole ID
- GS2647
- Project
- Golden Summit
- Commodity
- gold
- Region
- usa_ak
- Reported Region
- usa_ak
- Ticker
- FVL
Geometry
- Grade
- 0.84
- Grade Unit
- g/t
- Intercept
- 112.8 m
- From
- 447.1 m
- To
- 559.9 m
- Hole Depth
- 898.2 m
- Intercept Depth
- 136.2 m
Classification
- Deposit Type
- orogenic
- Program
- mixed
- Sample Type
- drill
- Group ID
- GS2647:447.1-559.9
- Mining Method
- open_pit
Location
- Easting
- 479001
- Northing
- 7215086
- Azimuth
- 360 °
- Dip
- -90 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-10-15T00:00:00.000Z
Reasoning: This long sub-interval with a moderate grade contributes significantly to the overall mineralization and yields a strong GT product.
Positive factors
- Moderate grade
- Strong GT product
- Long intercept length
Negative factors
- Apparent width only
Evidence · table
“0.84”
Context: 112.8
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
GS2647Golden Summit · goldGrade: 0.97Grade Unit: g/tIntercept: 45.7 mView all detailsHide details
Identity
- Hole ID
- GS2647
- Project
- Golden Summit
- Commodity
- gold
- Region
- usa_ak
- Reported Region
- usa_ak
- Ticker
- FVL
Geometry
- Grade
- 0.97
- Grade Unit
- g/t
- Intercept
- 45.7 m
- From
- 474.6 m
- To
- 520.3 m
- Hole Depth
- 898.2 m
- Intercept Depth
- 136.2 m
Classification
- Deposit Type
- orogenic
- Program
- mixed
- Sample Type
- drill
- Group ID
- GS2647:474.6-520.3
- Mining Method
- open_pit
Location
- Easting
- 479001
- Northing
- 7215086
- Azimuth
- 360 °
- Dip
- -90 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-10-15T00:00:00.000Z
Reasoning: This sub-interval shows a moderate grade over a moderate length, adding to the overall mineralization within the broader zone.
Positive factors
- Moderate grade
- Moderate GT product
Negative factors
- Apparent width only
Evidence · table
“0.97”
Context: 45.7
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
GS2647Golden Summit · goldGrade: 0.83Grade Unit: g/tIntercept: 27.4 mView all detailsHide details
Identity
- Hole ID
- GS2647
- Project
- Golden Summit
- Commodity
- gold
- Region
- usa_ak
- Reported Region
- usa_ak
- Ticker
- FVL
Geometry
- Grade
- 0.83
- Grade Unit
- g/t
- Intercept
- 27.4 m
- From
- 633.1 m
- To
- 660.5 m
- Hole Depth
- 898.2 m
- Intercept Depth
- 136.2 m
Classification
- Deposit Type
- orogenic
- Program
- mixed
- Sample Type
- drill
- Group ID
- GS2647:633.1-660.5
- Mining Method
- open_pit
Location
- Easting
- 479001
- Northing
- 7215086
- Azimuth
- 360 °
- Dip
- -90 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-10-15T00:00:00.000Z
Reasoning: This sub-interval shows a moderate grade over a moderate length, contributing to the overall mineralization within the broader zone.
Positive factors
- Moderate grade
- Moderate GT product
Negative factors
- Apparent width only
Evidence · table
“0.83”
Context: 27.4
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
GS2647Golden Summit · goldGrade: 1.02Grade Unit: g/tIntercept: 33.5 mView all detailsHide details
Identity
- Hole ID
- GS2647
- Project
- Golden Summit
- Commodity
- gold
- Region
- usa_ak
- Reported Region
- usa_ak
- Ticker
- FVL
Geometry
- Grade
- 1.02
- Grade Unit
- g/t
- Intercept
- 33.5 m
- From
- 709.3 m
- To
- 742.8 m
- Hole Depth
- 898.2 m
- Intercept Depth
- 136.2 m
Classification
- Deposit Type
- orogenic
- Program
- mixed
- Sample Type
- drill
- Group ID
- GS2647:709.3-742.8
- Mining Method
- open_pit
Location
- Easting
- 479001
- Northing
- 7215086
- Azimuth
- 360 °
- Dip
- -90 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-10-15T00:00:00.000Z
Reasoning: This sub-interval shows a moderate grade over a moderate length, adding to the overall mineralization within the broader zone.
Positive factors
- Moderate grade
- Moderate GT product
Negative factors
- Apparent width only
Evidence · table
“1.02”
Context: 33.5
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
GS2648Golden Summit · goldGrade: 1.67Grade Unit: g/tIntercept: 30.5 mView all detailsHide details
Identity
- Hole ID
- GS2648
- Project
- Golden Summit
- Commodity
- gold
- Region
- usa_ak
- Reported Region
- usa_ak
- Ticker
- FVL
Geometry
- Grade
- 1.67
- Grade Unit
- g/t
- Intercept
- 30.5 m
- From
- 63.1 m
- To
- 93.6 m
- Hole Depth
- 630 m
- Intercept Depth
- 63.1 m
Classification
- Deposit Type
- orogenic
- Program
- mixed
- Sample Type
- drill
- Group ID
- GS2648:63.1-93.6
- Mining Method
- open_pit
Location
- Easting
- 479358
- Northing
- 7215450
- Azimuth
- 360 °
- Dip
- -90 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-10-15T00:00:00.000Z
Reasoning: This near-surface intercept shows a strong grade over a good length, yielding a strong GT product, which is positive for starter pit optimization.
Positive factors
- Strong grade
- Strong GT product
- Near-surface mineralization
Negative factors
- Apparent width only
Evidence · table
“1.67”
Context: 30.5
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
GS2648Golden Summit · goldGrade: 2.47Grade Unit: g/tIntercept: 18 mView all detailsHide details
Identity
- Hole ID
- GS2648
- Project
- Golden Summit
- Commodity
- gold
- Region
- usa_ak
- Reported Region
- usa_ak
- Ticker
- FVL
Geometry
- Grade
- 2.47
- Grade Unit
- g/t
- Intercept
- 18 m
- From
- 63.1 m
- To
- 81.1 m
- Hole Depth
- 630 m
- Intercept Depth
- 63.1 m
Classification
- Deposit Type
- orogenic
- Program
- mixed
- Sample Type
- drill
- Group ID
- GS2648:63.1-81.1
- Mining Method
- open_pit
Location
- Easting
- 479358
- Northing
- 7215450
- Azimuth
- 360 °
- Dip
- -90 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-10-15T00:00:00.000Z
Reasoning: This high-grade sub-interval within a near-surface zone shows a strong grade over a good length, yielding a strong GT product, which is highly positive for starter pit optimization.
Positive factors
- Strong grade
- Strong GT product
- Near-surface mineralization
Negative factors
- Apparent width only
Evidence · table
“2.47”
Context: 18
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
GS2648Golden Summit · goldGrade: 2.09Grade Unit: g/tIntercept: 5.1 mView all detailsHide details
Identity
- Hole ID
- GS2648
- Project
- Golden Summit
- Commodity
- gold
- Region
- usa_ak
- Reported Region
- usa_ak
- Ticker
- FVL
Geometry
- Grade
- 2.09
- Grade Unit
- g/t
- Intercept
- 5.1 m
- From
- 118 m
- To
- 123.1 m
- Hole Depth
- 630 m
- Intercept Depth
- 63.1 m
Classification
- Deposit Type
- orogenic
- Program
- mixed
- Sample Type
- drill
- Group ID
- GS2648:118-123.1
- Mining Method
- open_pit
Location
- Easting
- 479358
- Northing
- 7215450
- Azimuth
- 360 °
- Dip
- -90 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-10-15T00:00:00.000Z
Reasoning: This intercept shows a strong grade over a narrow length, contributing to the overall mineralization.
Positive factors
- Strong grade
- Moderate GT product
Negative factors
- Apparent width only
Evidence · table
“2.09”
Context: 5.1
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
GS2648Golden Summit · goldGrade: 0.68Grade Unit: g/tIntercept: 18.6 mView all detailsHide details
Identity
- Hole ID
- GS2648
- Project
- Golden Summit
- Commodity
- gold
- Region
- usa_ak
- Reported Region
- usa_ak
- Ticker
- FVL
Geometry
- Grade
- 0.68
- Grade Unit
- g/t
- Intercept
- 18.6 m
- From
- 163.4 m
- To
- 182 m
- Hole Depth
- 630 m
- Intercept Depth
- 63.1 m
Classification
- Deposit Type
- orogenic
- Program
- mixed
- Sample Type
- drill
- Group ID
- GS2648:163.4-182
- Mining Method
- open_pit
Location
- Easting
- 479358
- Northing
- 7215450
- Azimuth
- 360 °
- Dip
- -90 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-10-15T00:00:00.000Z
Reasoning: This intercept shows a moderate grade over a moderate length, contributing to the overall mineralization.
Positive factors
- Moderate grade
- Weak GT product
Negative factors
- Apparent width only
Evidence · table
“0.68”
Context: 18.6
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
GS2648Golden Summit · goldGrade: 0.82Grade Unit: g/tIntercept: 18.1 mView all detailsHide details
Identity
- Hole ID
- GS2648
- Project
- Golden Summit
- Commodity
- gold
- Region
- usa_ak
- Reported Region
- usa_ak
- Ticker
- FVL
Geometry
- Grade
- 0.82
- Grade Unit
- g/t
- Intercept
- 18.1 m
- From
- 227.7 m
- To
- 245.8 m
- Hole Depth
- 630 m
- Intercept Depth
- 63.1 m
Classification
- Deposit Type
- orogenic
- Program
- mixed
- Sample Type
- drill
- Group ID
- GS2648:227.7-245.8
- Mining Method
- open_pit
Location
- Easting
- 479358
- Northing
- 7215450
- Azimuth
- 360 °
- Dip
- -90 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-10-15T00:00:00.000Z
Reasoning: This intercept shows a moderate grade over a moderate length, contributing to the overall mineralization.
Positive factors
- Moderate grade
- Weak GT product
Negative factors
- Apparent width only
Evidence · table
“0.82”
Context: 18.1
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
GS2648Golden Summit · goldGrade: 0.74Grade Unit: g/tIntercept: 10.5 mView all detailsHide details
Identity
- Hole ID
- GS2648
- Project
- Golden Summit
- Commodity
- gold
- Region
- usa_ak
- Reported Region
- usa_ak
- Ticker
- FVL
Geometry
- Grade
- 0.74
- Grade Unit
- g/t
- Intercept
- 10.5 m
- From
- 296.4 m
- To
- 306.9 m
- Hole Depth
- 630 m
- Intercept Depth
- 63.1 m
Classification
- Deposit Type
- orogenic
- Program
- mixed
- Sample Type
- drill
- Group ID
- GS2648:296.4-306.9
- Mining Method
- open_pit
Location
- Easting
- 479358
- Northing
- 7215450
- Azimuth
- 360 °
- Dip
- -90 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-10-15T00:00:00.000Z
Reasoning: This intercept shows a moderate grade over a narrow length, contributing to the overall mineralization.
Positive factors
- Moderate grade
- Weak GT product
Negative factors
- Apparent width only
Evidence · table
“0.74”
Context: 10.5
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
GS2648Golden Summit · goldGrade: 0.89Grade Unit: g/tIntercept: 149.7 mView all detailsHide details
Identity
- Hole ID
- GS2648
- Project
- Golden Summit
- Commodity
- gold
- Region
- usa_ak
- Reported Region
- usa_ak
- Ticker
- FVL
Geometry
- Grade
- 0.89
- Grade Unit
- g/t
- Intercept
- 149.7 m
- From
- 343.2 m
- To
- 492.9 m
- Hole Depth
- 630 m
- Intercept Depth
- 63.1 m
Classification
- Deposit Type
- orogenic
- Program
- mixed
- Sample Type
- drill
- Group ID
- GS2648:343.2-492.9
- Mining Method
- open_pit
Location
- Easting
- 479358
- Northing
- 7215450
- Azimuth
- 360 °
- Dip
- -90 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-10-15T00:00:00.000Z
Reasoning: This long intercept with a moderate grade yields a strong GT product, contributing to the overall mineralization continuity.
Positive factors
- Moderate grade
- Strong GT product
- Long intercept length
Negative factors
- Apparent width only
Evidence · table
“0.89”
Context: 149.7
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
GS2648Golden Summit · goldGrade: 1.11Grade Unit: g/tIntercept: 79.3 mView all detailsHide details
Identity
- Hole ID
- GS2648
- Project
- Golden Summit
- Commodity
- gold
- Region
- usa_ak
- Reported Region
- usa_ak
- Ticker
- FVL
Geometry
- Grade
- 1.11
- Grade Unit
- g/t
- Intercept
- 79.3 m
- From
- 377 m
- To
- 456.3 m
- Hole Depth
- 630 m
- Intercept Depth
- 63.1 m
Classification
- Deposit Type
- orogenic
- Program
- mixed
- Sample Type
- drill
- Group ID
- GS2648:377-456.3
- Mining Method
- open_pit
Location
- Easting
- 479358
- Northing
- 7215450
- Azimuth
- 360 °
- Dip
- -90 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-10-15T00:00:00.000Z
Reasoning: This long sub-interval with a moderate grade yields a strong GT product, contributing to the overall mineralization continuity.
Positive factors
- Moderate grade
- Strong GT product
- Long intercept length
Negative factors
- Apparent width only
Evidence · table
“1.11”
Context: 79.3
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
GS2656Golden Summit · goldGrade: 1.89Grade Unit: g/tIntercept: 5.9 mView all detailsHide details
Identity
- Hole ID
- GS2656
- Project
- Golden Summit
- Commodity
- gold
- Region
- usa_ak
- Reported Region
- usa_ak
- Ticker
- FVL
Geometry
- Grade
- 1.89
- Grade Unit
- g/t
- Intercept
- 5.9 m
- From
- 111.1 m
- To
- 117 m
- Hole Depth
- 758 m
- Intercept Depth
- 111.1 m
Classification
- Deposit Type
- orogenic
- Program
- mixed
- Sample Type
- drill
- Group ID
- GS2656:111.1-117
- Mining Method
- open_pit
Location
- Easting
- 478898
- Northing
- 7215339
- Azimuth
- 360 °
- Dip
- -90 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-10-15T00:00:00.000Z
Reasoning: This intercept shows a strong grade over a narrow length, contributing to the overall mineralization.
Positive factors
- Strong grade
- Weak GT product
Negative factors
- Apparent width only
Evidence · table
“1.89”
Context: 5.9
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
GS2656Golden Summit · goldGrade: 1.88Grade Unit: g/tIntercept: 3.5 mView all detailsHide details
Identity
- Hole ID
- GS2656
- Project
- Golden Summit
- Commodity
- gold
- Region
- usa_ak
- Reported Region
- usa_ak
- Ticker
- FVL
Geometry
- Grade
- 1.88
- Grade Unit
- g/t
- Intercept
- 3.5 m
- From
- 139 m
- To
- 142.5 m
- Hole Depth
- 758 m
- Intercept Depth
- 111.1 m
Classification
- Deposit Type
- orogenic
- Program
- mixed
- Sample Type
- drill
- Group ID
- GS2656:139-142.5
- Mining Method
- open_pit
Location
- Easting
- 478898
- Northing
- 7215339
- Azimuth
- 360 °
- Dip
- -90 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-10-15T00:00:00.000Z
Reasoning: This intercept shows a strong grade over a very narrow length, contributing to the overall mineralization.
Positive factors
- Strong grade
- Weak GT product
Negative factors
- Apparent width only
Evidence · table
“1.88”
Context: 3.5
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
GS2656Golden Summit · goldGrade: 1.23Grade Unit: g/tIntercept: 19.6 mView all detailsHide details
Identity
- Hole ID
- GS2656
- Project
- Golden Summit
- Commodity
- gold
- Region
- usa_ak
- Reported Region
- usa_ak
- Ticker
- FVL
Geometry
- Grade
- 1.23
- Grade Unit
- g/t
- Intercept
- 19.6 m
- From
- 203 m
- To
- 222.6 m
- Hole Depth
- 758 m
- Intercept Depth
- 111.1 m
Classification
- Deposit Type
- orogenic
- Program
- mixed
- Sample Type
- drill
- Group ID
- GS2656:203-222.6
- Mining Method
- open_pit
Location
- Easting
- 478898
- Northing
- 7215339
- Azimuth
- 360 °
- Dip
- -90 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-10-15T00:00:00.000Z
Reasoning: This intercept shows a moderate grade over a moderate length, contributing to the overall mineralization.
Positive factors
- Moderate grade
- Moderate GT product
Negative factors
- Apparent width only
Evidence · table
“1.23”
Context: 19.6
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
GS2656Golden Summit · goldGrade: 0.79Grade Unit: g/tIntercept: 70.3 mView all detailsHide details
Identity
- Hole ID
- GS2656
- Project
- Golden Summit
- Commodity
- gold
- Region
- usa_ak
- Reported Region
- usa_ak
- Ticker
- FVL
Geometry
- Grade
- 0.79
- Grade Unit
- g/t
- Intercept
- 70.3 m
- From
- 236 m
- To
- 306.3 m
- Hole Depth
- 758 m
- Intercept Depth
- 111.1 m
Classification
- Deposit Type
- orogenic
- Program
- mixed
- Sample Type
- drill
- Group ID
- GS2656:236-306.3
- Mining Method
- open_pit
Location
- Easting
- 478898
- Northing
- 7215339
- Azimuth
- 360 °
- Dip
- -90 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-10-15T00:00:00.000Z
Reasoning: This long intercept with a moderate grade contributes to the overall mineralization continuity.
Positive factors
- Moderate grade
- Moderate GT product
- Long intercept length
Negative factors
- Apparent width only
Evidence · table
“0.79”
Context: 70.3
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
GS2656Golden Summit · goldGrade: 2.85Grade Unit: g/tIntercept: 6 mView all detailsHide details
Identity
- Hole ID
- GS2656
- Project
- Golden Summit
- Commodity
- gold
- Region
- usa_ak
- Reported Region
- usa_ak
- Ticker
- FVL
Geometry
- Grade
- 2.85
- Grade Unit
- g/t
- Intercept
- 6 m
- From
- 236 m
- To
- 242 m
- Hole Depth
- 758 m
- Intercept Depth
- 111.1 m
Classification
- Deposit Type
- orogenic
- Program
- mixed
- Sample Type
- drill
- Group ID
- GS2656:236-242
- Mining Method
- open_pit
Location
- Easting
- 478898
- Northing
- 7215339
- Azimuth
- 360 °
- Dip
- -90 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-10-15T00:00:00.000Z
Reasoning: This sub-interval shows a strong grade over a moderate length, contributing to the overall mineralization.
Positive factors
- Strong grade
- Moderate GT product
Negative factors
- Apparent width only
Evidence · table
“2.85”
Context: 6.0
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
GS2656Golden Summit · goldGrade: 1.24Grade Unit: g/tIntercept: 213 mView all detailsHide details
Identity
- Hole ID
- GS2656
- Project
- Golden Summit
- Commodity
- gold
- Region
- usa_ak
- Reported Region
- usa_ak
- Ticker
- FVL
Geometry
- Grade
- 1.24
- Grade Unit
- g/t
- Intercept
- 213 m
- From
- 422 m
- To
- 635 m
- Hole Depth
- 758 m
- Intercept Depth
- 111.1 m
Classification
- Deposit Type
- orogenic
- Program
- mixed
- Sample Type
- drill
- Group ID
- GS2656:422-635
- Mining Method
- open_pit
Location
- Easting
- 478898
- Northing
- 7215339
- Azimuth
- 360 °
- Dip
- -90 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-10-15T00:00:00.000Z
Reasoning: This very long intercept with a moderate grade yields a strong GT product, demonstrating significant mineralization continuity and supporting bulk tonnage potential.
Positive factors
- Moderate grade
- Strong GT product
- Very long intercept length
Negative factors
- Apparent width only
Evidence · table
“1.24”
Context: 213.0
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
GS2656Golden Summit · goldGrade: 5.77Grade Unit: g/tIntercept: 21 mView all detailsHide details
Identity
- Hole ID
- GS2656
- Project
- Golden Summit
- Commodity
- gold
- Region
- usa_ak
- Reported Region
- usa_ak
- Ticker
- FVL
Geometry
- Grade
- 5.77
- Grade Unit
- g/t
- Intercept
- 21 m
- From
- 467 m
- To
- 488 m
- Hole Depth
- 758 m
- Intercept Depth
- 111.1 m
Classification
- Deposit Type
- orogenic
- Program
- mixed
- Sample Type
- drill
- Group ID
- GS2656:467-488
- Mining Method
- open_pit
Location
- Easting
- 478898
- Northing
- 7215339
- Azimuth
- 360 °
- Dip
- -90 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-10-15T00:00:00.000Z
Reasoning: This exceptional grade over a significant length yields a strong GT product, representing a high-grade zone within the broader mineralization and is highly material.
Positive factors
- Exceptional grade
- Strong GT product
- Long intercept length
Negative factors
- Apparent width only
Evidence · table
“5.77”
Context: 21
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
GS2656Golden Summit · goldGrade: 32.7Grade Unit: g/tIntercept: 3 mView all detailsHide details
Identity
- Hole ID
- GS2656
- Project
- Golden Summit
- Commodity
- gold
- Region
- usa_ak
- Reported Region
- usa_ak
- Ticker
- FVL
Geometry
- Grade
- 32.7
- Grade Unit
- g/t
- Intercept
- 3 m
- From
- 482 m
- To
- 485 m
- Hole Depth
- 758 m
- Intercept Depth
- 111.1 m
Classification
- Deposit Type
- orogenic
- Program
- mixed
- Sample Type
- drill
- Group ID
- GS2656:482-485
- Mining Method
- open_pit
Location
- Easting
- 478898
- Northing
- 7215339
- Azimuth
- 360 °
- Dip
- -90 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-10-15T00:00:00.000Z
Reasoning: This bonanza-grade intercept over a moderate length yields a strong GT product, representing a very high-grade zone within the broader mineralization and is highly material.
Positive factors
- Bonanza Intercept
- Exceptional grade
- Strong GT product
Negative factors
- Apparent width only
Evidence · table
“32.7”
Context: 3.0
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
GS2656Golden Summit · goldGrade: 1.2Grade Unit: g/tIntercept: 11.7 mView all detailsHide details
Identity
- Hole ID
- GS2656
- Project
- Golden Summit
- Commodity
- gold
- Region
- usa_ak
- Reported Region
- usa_ak
- Ticker
- FVL
Geometry
- Grade
- 1.2
- Grade Unit
- g/t
- Intercept
- 11.7 m
- From
- 515 m
- To
- 526.7 m
- Hole Depth
- 758 m
- Intercept Depth
- 111.1 m
Classification
- Deposit Type
- orogenic
- Program
- mixed
- Sample Type
- drill
- Group ID
- GS2656:515-526.7
- Mining Method
- open_pit
Location
- Easting
- 478898
- Northing
- 7215339
- Azimuth
- 360 °
- Dip
- -90 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-10-15T00:00:00.000Z
Reasoning: This sub-interval shows a moderate grade over a moderate length, contributing to the overall mineralization.
Positive factors
- Moderate grade
- Weak GT product
Negative factors
- Apparent width only
Evidence · table
“1.20”
Context: 11.7
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
GS2656Golden Summit · goldGrade: 3.29Grade Unit: g/tIntercept: 6 mView all detailsHide details
Identity
- Hole ID
- GS2656
- Project
- Golden Summit
- Commodity
- gold
- Region
- usa_ak
- Reported Region
- usa_ak
- Ticker
- FVL
Geometry
- Grade
- 3.29
- Grade Unit
- g/t
- Intercept
- 6 m
- From
- 539 m
- To
- 545 m
- Hole Depth
- 758 m
- Intercept Depth
- 111.1 m
Classification
- Deposit Type
- orogenic
- Program
- mixed
- Sample Type
- drill
- Group ID
- GS2656:539-545
- Mining Method
- open_pit
Location
- Easting
- 478898
- Northing
- 7215339
- Azimuth
- 360 °
- Dip
- -90 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-10-15T00:00:00.000Z
Reasoning: This sub-interval shows an exceptional grade over a moderate length, contributing to the overall mineralization.
Positive factors
- Exceptional grade
- Moderate GT product
Negative factors
- Apparent width only
Evidence · table
“3.29”
Context: 6.0
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
GS2656Golden Summit · goldGrade: 1.26Grade Unit: g/tIntercept: 18.9 mView all detailsHide details
Identity
- Hole ID
- GS2656
- Project
- Golden Summit
- Commodity
- gold
- Region
- usa_ak
- Reported Region
- usa_ak
- Ticker
- FVL
Geometry
- Grade
- 1.26
- Grade Unit
- g/t
- Intercept
- 18.9 m
- From
- 562.9 m
- To
- 581.8 m
- Hole Depth
- 758 m
- Intercept Depth
- 111.1 m
Classification
- Deposit Type
- orogenic
- Program
- mixed
- Sample Type
- drill
- Group ID
- GS2656:562.9-581.8
- Mining Method
- open_pit
Location
- Easting
- 478898
- Northing
- 7215339
- Azimuth
- 360 °
- Dip
- -90 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-10-15T00:00:00.000Z
Reasoning: This sub-interval shows a moderate grade over a moderate length, contributing to the overall mineralization.
Positive factors
- Moderate grade
- Moderate GT product
Negative factors
- Apparent width only
Evidence · table
“1.26”
Context: 18.9
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
GS2656Golden Summit · goldGrade: 1.05Grade Unit: g/tIntercept: 39 mView all detailsHide details
Identity
- Hole ID
- GS2656
- Project
- Golden Summit
- Commodity
- gold
- Region
- usa_ak
- Reported Region
- usa_ak
- Ticker
- FVL
Geometry
- Grade
- 1.05
- Grade Unit
- g/t
- Intercept
- 39 m
- From
- 596 m
- To
- 635 m
- Hole Depth
- 758 m
- Intercept Depth
- 111.1 m
Classification
- Deposit Type
- orogenic
- Program
- mixed
- Sample Type
- drill
- Group ID
- GS2656:596-635
- Mining Method
- open_pit
Location
- Easting
- 478898
- Northing
- 7215339
- Azimuth
- 360 °
- Dip
- -90 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-10-15T00:00:00.000Z
Reasoning: This sub-interval shows a moderate grade over a moderate length, contributing to the overall mineralization.
Positive factors
- Moderate grade
- Moderate GT product
Negative factors
- Apparent width only
Evidence · table
“1.05”
Context: 39.0
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
GS2644Golden Summit · goldGrade: 0.97Grade Unit: g/tIntercept: 9.1 mView all detailsHide details
Identity
- Hole ID
- GS2644
- Project
- Golden Summit
- Commodity
- gold
- Region
- usa_ak
- Reported Region
- usa_ak
- Ticker
- FVL
Geometry
- Grade
- 0.97
- Grade Unit
- g/t
- Intercept
- 9.1 m
- From
- 160.6 m
- To
- 169.7 m
- Hole Depth
- 349.6 m
- Intercept Depth
- 160.6 m
Classification
- Deposit Type
- orogenic
- Program
- mixed
- Sample Type
- drill
- Group ID
- GS2644:160.6-169.7
- Mining Method
- open_pit
Location
- Easting
- 479803
- Northing
- 7215303
- Azimuth
- 360 °
- Dip
- -90 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-10-15T00:00:00.000Z
Reasoning: This intercept shows a moderate grade over a narrow length, contributing to the overall mineralization.
Positive factors
- Moderate grade
- Weak GT product
Negative factors
- Apparent width only
Evidence · table
“0.97”
Context: 9.1
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
GS2644Golden Summit · goldGrade: 1.03Grade Unit: g/tIntercept: 17.9 mView all detailsHide details
Identity
- Hole ID
- GS2644
- Project
- Golden Summit
- Commodity
- gold
- Region
- usa_ak
- Reported Region
- usa_ak
- Ticker
- FVL
Geometry
- Grade
- 1.03
- Grade Unit
- g/t
- Intercept
- 17.9 m
- From
- 252.1 m
- To
- 270 m
- Hole Depth
- 349.6 m
- Intercept Depth
- 160.6 m
Classification
- Deposit Type
- orogenic
- Program
- mixed
- Sample Type
- drill
- Group ID
- GS2644:252.1-270
- Mining Method
- open_pit
Location
- Easting
- 479803
- Northing
- 7215303
- Azimuth
- 360 °
- Dip
- -90 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-10-15T00:00:00.000Z
Reasoning: This intercept shows a moderate grade over a moderate length, contributing to the overall mineralization.
Positive factors
- Moderate grade
- Weak GT product
Negative factors
- Apparent width only
Evidence · table
“1.03”
Context: 17.9
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
GS2644Golden Summit · goldGrade: 1.01Grade Unit: g/tIntercept: 7.1 mView all detailsHide details
Identity
- Hole ID
- GS2644
- Project
- Golden Summit
- Commodity
- gold
- Region
- usa_ak
- Reported Region
- usa_ak
- Ticker
- FVL
Geometry
- Grade
- 1.01
- Grade Unit
- g/t
- Intercept
- 7.1 m
- From
- 315.1 m
- To
- 322.2 m
- Hole Depth
- 349.6 m
- Intercept Depth
- 160.6 m
Classification
- Deposit Type
- orogenic
- Program
- mixed
- Sample Type
- drill
- Group ID
- GS2644:315.1-322.2
- Mining Method
- open_pit
Location
- Easting
- 479803
- Northing
- 7215303
- Azimuth
- 360 °
- Dip
- -90 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-10-15T00:00:00.000Z
Reasoning: This intercept shows a moderate grade over a narrow length, contributing to the overall mineralization.
Positive factors
- Moderate grade
- Weak GT product
Negative factors
- Apparent width only
Evidence · table
“1.01”
Context: 7.1
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
GS2652Golden Summit · goldGrade: 2.1Grade Unit: g/tIntercept: 9.1 mView all detailsHide details
Identity
- Hole ID
- GS2652
- Project
- Golden Summit
- Commodity
- gold
- Region
- usa_ak
- Reported Region
- usa_ak
- Ticker
- FVL
Geometry
- Grade
- 2.1
- Grade Unit
- g/t
- Intercept
- 9.1 m
- From
- 270.4 m
- To
- 279.5 m
- Hole Depth
- 346.6 m
- Intercept Depth
- 270.4 m
Classification
- Deposit Type
- orogenic
- Program
- mixed
- Sample Type
- drill
- Group ID
- GS2652:270.4-279.5
- Mining Method
- open_pit
Location
- Easting
- 479754
- Northing
- 7215281
- Azimuth
- 360 °
- Dip
- -75 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-10-15T00:00:00.000Z
Reasoning: This intercept shows a strong grade over a moderate length, contributing to the overall mineralization.
Positive factors
- Strong grade
- Moderate GT product
Negative factors
- Apparent width only
Evidence · table
“2.1”
Context: 9.1
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
GS2642Golden Summit · goldGrade: 1.81Grade Unit: g/tIntercept: 5.5 mView all detailsHide details
Identity
- Hole ID
- GS2642
- Project
- Golden Summit
- Commodity
- gold
- Region
- usa_ak
- Reported Region
- usa_ak
- Ticker
- FVL
Geometry
- Grade
- 1.81
- Grade Unit
- g/t
- Intercept
- 5.5 m
- From
- 70.2 m
- To
- 75.7 m
- Hole Depth
- 209 m
- Intercept Depth
- 70.2 m
Classification
- Deposit Type
- orogenic
- Program
- mixed
- Sample Type
- drill
- Group ID
- GS2642:70.2-75.7
- Mining Method
- open_pit
Location
- Easting
- 479255
- Northing
- 7215624
- Azimuth
- 360 °
- Dip
- -75 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-10-15T00:00:00.000Z
Reasoning: This intercept shows a strong grade over a narrow length, contributing to the overall mineralization.
Positive factors
- Strong grade
- Weak GT product
Negative factors
- Apparent width only
Evidence · table
“1.81”
Context: 5.5
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
GS2643Golden Summit · goldGrade: 3.45Grade Unit: g/tIntercept: 3 mView all detailsHide details
Identity
- Hole ID
- GS2643
- Project
- Golden Summit
- Commodity
- gold
- Region
- usa_ak
- Reported Region
- usa_ak
- Ticker
- FVL
Geometry
- Grade
- 3.45
- Grade Unit
- g/t
- Intercept
- 3 m
- From
- 134 m
- To
- 137 m
- Hole Depth
- 281.6 m
- Intercept Depth
- 134 m
Classification
- Deposit Type
- orogenic
- Program
- mixed
- Sample Type
- drill
- Group ID
- GS2643:134-137
- Mining Method
- open_pit
Location
- Easting
- 479154
- Northing
- 7215742
- Azimuth
- 360 °
- Dip
- -75 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-10-15T00:00:00.000Z
Reasoning: This intercept shows an exceptional grade over a narrow length, contributing to the overall mineralization.
Positive factors
- Exceptional grade
- Moderate GT product
Negative factors
- Apparent width only
Evidence · table
“3.45”
Context: 3
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
GS2643Golden Summit · goldGrade: 0.96Grade Unit: g/tIntercept: 5.8 mView all detailsHide details
Identity
- Hole ID
- GS2643
- Project
- Golden Summit
- Commodity
- gold
- Region
- usa_ak
- Reported Region
- usa_ak
- Ticker
- FVL
Geometry
- Grade
- 0.96
- Grade Unit
- g/t
- Intercept
- 5.8 m
- From
- 161 m
- To
- 166.8 m
- Hole Depth
- 281.6 m
- Intercept Depth
- 134 m
Classification
- Deposit Type
- orogenic
- Program
- mixed
- Sample Type
- drill
- Group ID
- GS2643:161-166.8
- Mining Method
- open_pit
Location
- Easting
- 479154
- Northing
- 7215742
- Azimuth
- 360 °
- Dip
- -75 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-10-15T00:00:00.000Z
Reasoning: This intercept shows a moderate grade over a narrow length, contributing to the overall mineralization.
Positive factors
- Moderate grade
- Weak GT product
Negative factors
- Apparent width only
Evidence · table
“0.96”
Context: 5.8
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
GS2645Golden Summit · goldGrade: 0.85Grade Unit: g/tIntercept: 4.1 mView all detailsHide details
Identity
- Hole ID
- GS2645
- Project
- Golden Summit
- Commodity
- gold
- Region
- usa_ak
- Reported Region
- usa_ak
- Ticker
- FVL
Geometry
- Grade
- 0.85
- Grade Unit
- g/t
- Intercept
- 4.1 m
- From
- 20 m
- To
- 24.1 m
- Hole Depth
- 425 m
- Intercept Depth
- 20 m
Classification
- Deposit Type
- orogenic
- Program
- mixed
- Sample Type
- drill
- Group ID
- GS2645:20-24.1
- Mining Method
- open_pit
Location
- Easting
- 479200
- Northing
- 7215703
- Azimuth
- 360 °
- Dip
- -75 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-10-15T00:00:00.000Z
Reasoning: This near-surface intercept shows a moderate grade over a narrow length, contributing to the overall mineralization.
Positive factors
- Moderate grade
- Weak GT product
- Near-surface mineralization
Negative factors
- Apparent width only
Evidence · table
“0.85”
Context: 4.1
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
GS2645Golden Summit · goldGrade: 1.12Grade Unit: g/tIntercept: 10.4 mView all detailsHide details
Identity
- Hole ID
- GS2645
- Project
- Golden Summit
- Commodity
- gold
- Region
- usa_ak
- Reported Region
- usa_ak
- Ticker
- FVL
Geometry
- Grade
- 1.12
- Grade Unit
- g/t
- Intercept
- 10.4 m
- From
- 51.1 m
- To
- 61.5 m
- Hole Depth
- 425 m
- Intercept Depth
- 20 m
Classification
- Deposit Type
- orogenic
- Program
- mixed
- Sample Type
- drill
- Group ID
- GS2645:51.1-61.5
- Mining Method
- open_pit
Location
- Easting
- 479200
- Northing
- 7215703
- Azimuth
- 360 °
- Dip
- -75 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-10-15T00:00:00.000Z
Reasoning: This near-surface intercept shows a moderate grade over a moderate length, contributing to the overall mineralization.
Positive factors
- Moderate grade
- Weak GT product
- Near-surface mineralization
Negative factors
- Apparent width only
Evidence · table
“1.12”
Context: 10.4
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
GS2645Golden Summit · goldGrade: 2.55Grade Unit: g/tIntercept: 6 mView all detailsHide details
Identity
- Hole ID
- GS2645
- Project
- Golden Summit
- Commodity
- gold
- Region
- usa_ak
- Reported Region
- usa_ak
- Ticker
- FVL
Geometry
- Grade
- 2.55
- Grade Unit
- g/t
- Intercept
- 6 m
- From
- 140 m
- To
- 146 m
- Hole Depth
- 425 m
- Intercept Depth
- 20 m
Classification
- Deposit Type
- orogenic
- Program
- mixed
- Sample Type
- drill
- Group ID
- GS2645:140-146
- Mining Method
- open_pit
Location
- Easting
- 479200
- Northing
- 7215703
- Azimuth
- 360 °
- Dip
- -75 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-10-15T00:00:00.000Z
Reasoning: This intercept shows a strong grade over a moderate length, contributing to the overall mineralization.
Positive factors
- Strong grade
- Moderate GT product
Negative factors
- Apparent width only
Evidence · table
“2.55”
Context: 6.0
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
How Atlas produces this analysis
Minestarters Atlas uses automated extraction to summarize mining announcements, identify reported measurements, and classify supporting evidence. Sentiment reflects the extracted narrative and classification rules; it is an interpretation, not a reported measurement. Evidence quotes and context are provided where available. Missing data, low-confidence results, and review flags indicate limitations. Check the original publisher announcement before relying on an interpretation.