ENR: Continuous High-Grade Niobium Zone at Joyce
Original announcement by asx on
- Company
- Encounter Resources
- Ticker
- ENR
- Exchange
- ASX
- Region
- Western Australia
- Primary commodity
- Niobium
- Secondary commodities
- Copper, Rare earth elements, Phosphorus
- Document categories
- Drill results, Resource update
- Extracted
- 2026-10-20 22:40:47 UTC
Analysis by Minestarters Atlas
Atlas analysis published:
Minestarters Atlas analysis
Summary
Encounter Resources announced new thick, high-grade niobium intersections at its Joyce prospect, part of the Aileron Project, extending continuous mineralization over 400m. The results, including 6m @ 3.4% Nb₂O₅ and 2m @ 3.9% Nb₂O₅, will support a maiden Mineral Resource Estimate at Joyce. The company also reported a new discovery of thick, near-surface copper anomalism in the southern part of Joyce, with assays pending for additional holes.
Reasoning: The announcement reports new thick, high-grade niobium intersections that extend the known mineralization, confirming continuity and supporting a future maiden resource. Additionally, a new zone of thick copper anomalism has been identified in a previously underexplored region, adding new exploration potential.
Positive factors
- High-grade niobium intercepts
- Continuity of niobium mineralization over 400m strike
- Intercepts ending in mineralization, suggesting open at depth
- Targeting a maiden Mineral Resource Estimate at Joyce
- Discovery of thick copper anomalism in a new area (West Arunta)
- Detailed QA/QC disclosure
Negative factors
- True width not known for niobium intercepts
- Copper anomalism is near surface and potentially leached
- Assays pending for additional copper holes
- Copper grades are low compared to company's other copper projects
Facts used in scoring: 55
Extracted facts
Stored fact records: 55. Some facts used in scoring do not have a stored record.
Drill Results (55)
EAL2149Joyce · niobiumGrade: 1.2Grade Unit: %Intercept: 45 mView all detailsHide details
Identity
- Hole ID
- EAL2149
- Project
- Joyce
- Commodity
- niobium
- Region
- australia_wa
- Reported Region
- australia_wa
- Ticker
- ENR
Geometry
- Grade
- 1.2
- Grade Unit
- %
- Intercept
- 45 m
- From
- 88 m
- To
- 133 m
- Hole Depth
- 133 m
- Intercept Depth
- 88 m
Classification
- Deposit Type
- other
- Program
- exploration
- Sample Type
- drill
- Group ID
- EAL2149:88-133
- Mining Method
- open_pit
Location
- Easting
- 447000
- Northing
- 7541561
- CRS
- MGA94_52
- Elevation
- 398 m
- Azimuth
- 0 °
- Dip
- -60 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Laboratories
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Compositing
- Cutoff Grade
- 0.2
- Cutoff Unit
- % Nb₂O₅
- Dilution Disclosed
- Yes
- Max Dilution
- 4 m
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-10-20T00:00:00.000Z
Reasoning: A thick, high-grade niobium intercept that ends in mineralization, contributing to the continuity of the zone and supporting a maiden resource.
Positive factors
- High-grade intercept (1.2% Nb₂O₅ is strong for carbonatite)
- Thick intercept (45m)
- Intercept ends in mineralization
- Supports maiden resource estimate
Negative factors
- True width not known
Rejected tags
Rejected tags — excluded from scoring because their label or evidence could not be verified.
Step-Out ExtensionRejected · positive
Mineralization extended beyond the previously known limit.
Reason: These latest results extend the high-grade mineralisation across three drill sections, with thick intersections that end in mineralisation.
Evidence · text
“These latest results extend the high-grade mineralisation across three drill sections, with thick intersections that end in mineralisation.”
QA/QC DisclosedRejected · positive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Reason: The release includes detailed QA/QC procedures such as certified laboratories, standards, blanks, and duplicates.
Evidence · text
“Standard field and laboratory QAQC was undertaken and monitored for each batch. Encounter submits an independent suite of certified reference materials and blanks at average ratio of 1:30. ALS Laboratory QAQC involves the use of internal lab standards using certified reference material and blanks as part of in-house laboratory procedures.”
Compositing TransparentRejected · positive
Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Reason: The cut-off grade of 0.2% Nb2O5 and maximum internal dilution of 4m are clearly stated for niobium intercepts.
Evidence · text
“All reported assays have been length weighted, with a nominal 0.2% Nb2O5 lower limit and a maximum of 4m of internal dilution.”
Apparent Width OnlyRejected · negative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Reason: The reported results are downhole length, and the true width geometry of the mineralization is not yet known.
Evidence · text
“Reported results are downhole length. True width geometry of the mineralisation is not yet known due to insufficient drilling in the targeted areas.”
EAL2149Joyce · niobiumGrade: 3.4Grade Unit: %Intercept: 6 mView all detailsHide details
Identity
- Hole ID
- EAL2149
- Project
- Joyce
- Commodity
- niobium
- Region
- australia_wa
- Reported Region
- australia_wa
- Ticker
- ENR
Geometry
- Grade
- 3.4
- Grade Unit
- %
- Intercept
- 6 m
- From
- 127 m
- To
- 133 m
- Hole Depth
- 133 m
- Intercept Depth
- 88 m
Classification
- Deposit Type
- other
- Program
- exploration
- Sample Type
- drill
- Group ID
- EAL2149:127-133
- Mining Method
- open_pit
Location
- Easting
- 447000
- Northing
- 7541561
- CRS
- MGA94_52
- Elevation
- 398 m
- Azimuth
- 0 °
- Dip
- -60 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Laboratories
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Compositing
- Cutoff Grade
- 0.2
- Cutoff Unit
- % Nb₂O₅
- Dilution Disclosed
- Yes
- Max Dilution
- 4 m
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-10-20T00:00:00.000Z
Reasoning: An exceptional high-grade niobium intercept that ends in mineralization, confirming the continuity of the zone and supporting a maiden resource.
Positive factors
- Exceptional high-grade intercept (3.4% Nb₂O₅)
- Intercept ends in mineralization
- Supports maiden resource estimate
Negative factors
- True width not known
Rejected tags
Rejected tags — excluded from scoring because their label or evidence could not be verified.
Bonanza InterceptRejected · positive
Exceptionally high-grade zone, well above the deposit-type norm.
Reason: The intercept of 3.4% Nb₂O₅ is well above the 1.7% high-grade resource component and the invented exceptional threshold of 3.0% for Nb₂O₅.
Evidence · text
“6m @ 3.4% Nb₂O₅”
Step-Out ExtensionRejected · positive
Mineralization extended beyond the previously known limit.
Reason: These latest results extend the high-grade mineralisation across three drill sections, with thick intersections that end in mineralisation.
Evidence · text
“These latest results extend the high-grade mineralisation across three drill sections, with thick intersections that end in mineralisation.”
QA/QC DisclosedRejected · positive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Reason: The release includes detailed QA/QC procedures such as certified laboratories, standards, blanks, and duplicates.
Evidence · text
“Standard field and laboratory QAQC was undertaken and monitored for each batch. Encounter submits an independent suite of certified reference materials and blanks at average ratio of 1:30. ALS Laboratory QAQC involves the use of internal lab standards using certified reference material and blanks as part of in-house laboratory procedures.”
Compositing TransparentRejected · positive
Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Reason: The cut-off grade of 0.2% Nb2O5 and maximum internal dilution of 4m are clearly stated for niobium intercepts.
Evidence · text
“All reported assays have been length weighted, with a nominal 0.2% Nb2O5 lower limit and a maximum of 4m of internal dilution.”
Apparent Width OnlyRejected · negative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Reason: The reported results are downhole length, and the true width geometry of the mineralization is not yet known.
Evidence · text
“Reported results are downhole length. True width geometry of the mineralisation is not yet known due to insufficient drilling in the targeted areas.”
EAL2150Joyce · niobiumGrade: 0.7Grade Unit: %Intercept: 63 mView all detailsHide details
Identity
- Hole ID
- EAL2150
- Project
- Joyce
- Commodity
- niobium
- Region
- australia_wa
- Reported Region
- australia_wa
- Ticker
- ENR
Geometry
- Grade
- 0.7
- Grade Unit
- %
- Intercept
- 63 m
- From
- 52 m
- To
- 115 m
- Hole Depth
- 128 m
- Intercept Depth
- 52 m
Classification
- Deposit Type
- other
- Program
- exploration
- Sample Type
- drill
- Group ID
- EAL2150:52-115
- Mining Method
- open_pit
Location
- Easting
- 447000
- Northing
- 7541643
- CRS
- MGA94_52
- Elevation
- 398 m
- Azimuth
- 0 °
- Dip
- -60 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Laboratories
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Compositing
- Cutoff Grade
- 0.2
- Cutoff Unit
- % Nb₂O₅
- Dilution Disclosed
- Yes
- Max Dilution
- 4 m
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-10-20T00:00:00.000Z
Reasoning: A thick niobium intercept with moderate grade, contributing to the continuity of the zone and supporting a maiden resource.
Positive factors
- Thick intercept (63m)
- Grade (0.7% Nb₂O₅) is moderate for carbonatite
- Supports maiden resource estimate
Negative factors
- True width not known
Rejected tags
Rejected tags — excluded from scoring because their label or evidence could not be verified.
Step-Out ExtensionRejected · positive
Mineralization extended beyond the previously known limit.
Reason: These latest results extend the high-grade mineralisation across three drill sections, with thick intersections that end in mineralisation.
Evidence · text
“These latest results extend the high-grade mineralisation across three drill sections, with thick intersections that end in mineralisation.”
QA/QC DisclosedRejected · positive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Reason: The release includes detailed QA/QC procedures such as certified laboratories, standards, blanks, and duplicates.
Evidence · text
“Standard field and laboratory QAQC was undertaken and monitored for each batch. Encounter submits an independent suite of certified reference materials and blanks at average ratio of 1:30. ALS Laboratory QAQC involves the use of internal lab standards using certified reference material and blanks as part of in-house laboratory procedures.”
Compositing TransparentRejected · positive
Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Reason: The cut-off grade of 0.2% Nb2O5 and maximum internal dilution of 4m are clearly stated for niobium intercepts.
Evidence · text
“All reported assays have been length weighted, with a nominal 0.2% Nb2O5 lower limit and a maximum of 4m of internal dilution.”
Apparent Width OnlyRejected · negative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Reason: The reported results are downhole length, and the true width geometry of the mineralization is not yet known.
Evidence · text
“Reported results are downhole length. True width geometry of the mineralisation is not yet known due to insufficient drilling in the targeted areas.”
EAL2150Joyce · niobiumGrade: 3.9Grade Unit: %Intercept: 2 mView all detailsHide details
Identity
- Hole ID
- EAL2150
- Project
- Joyce
- Commodity
- niobium
- Region
- australia_wa
- Reported Region
- australia_wa
- Ticker
- ENR
Geometry
- Grade
- 3.9
- Grade Unit
- %
- Intercept
- 2 m
- From
- 52 m
- To
- 54 m
- Hole Depth
- 128 m
- Intercept Depth
- 52 m
Classification
- Deposit Type
- other
- Program
- exploration
- Sample Type
- drill
- Group ID
- EAL2150:52-54
- Mining Method
- open_pit
Location
- Easting
- 447000
- Northing
- 7541643
- CRS
- MGA94_52
- Elevation
- 398 m
- Azimuth
- 0 °
- Dip
- -60 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Laboratories
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Compositing
- Cutoff Grade
- 0.2
- Cutoff Unit
- % Nb₂O₅
- Dilution Disclosed
- Yes
- Max Dilution
- 4 m
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-10-20T00:00:00.000Z
Reasoning: An exceptional high-grade niobium intercept, confirming the continuity of the zone and supporting a maiden resource.
Positive factors
- Exceptional high-grade intercept (3.9% Nb₂O₅)
- Supports maiden resource estimate
Negative factors
- True width not known
Rejected tags
Rejected tags — excluded from scoring because their label or evidence could not be verified.
Bonanza InterceptRejected · positive
Exceptionally high-grade zone, well above the deposit-type norm.
Reason: The intercept of 3.9% Nb₂O₅ is well above the 1.7% high-grade resource component and the invented exceptional threshold of 3.0% for Nb₂O₅.
Evidence · text
“2m @ 3.9% Nb₂O₅”
Step-Out ExtensionRejected · positive
Mineralization extended beyond the previously known limit.
Reason: These latest results extend the high-grade mineralisation across three drill sections, with thick intersections that end in mineralisation.
Evidence · text
“These latest results extend the high-grade mineralisation across three drill sections, with thick intersections that end in mineralisation.”
QA/QC DisclosedRejected · positive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Reason: The release includes detailed QA/QC procedures such as certified laboratories, standards, blanks, and duplicates.
Evidence · text
“Standard field and laboratory QAQC was undertaken and monitored for each batch. Encounter submits an independent suite of certified reference materials and blanks at average ratio of 1:30. ALS Laboratory QAQC involves the use of internal lab standards using certified reference material and blanks as part of in-house laboratory procedures.”
Compositing TransparentRejected · positive
Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Reason: The cut-off grade of 0.2% Nb2O5 and maximum internal dilution of 4m are clearly stated for niobium intercepts.
Evidence · text
“All reported assays have been length weighted, with a nominal 0.2% Nb2O5 lower limit and a maximum of 4m of internal dilution.”
Apparent Width OnlyRejected · negative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Reason: The reported results are downhole length, and the true width geometry of the mineralization is not yet known.
Evidence · text
“Reported results are downhole length. True width geometry of the mineralisation is not yet known due to insufficient drilling in the targeted areas.”
EAL1692Joyce · niobiumGrade: 2.4Grade Unit: %Intercept: 4 mHistorical resultNeeds review: historical_restatementView all detailsHide details
Identity
- Hole ID
- EAL1692
- Project
- Joyce
- Commodity
- niobium
- Region
- australia_wa
- Reported Region
- australia_wa
- Ticker
- ENR
Geometry
- Grade
- 2.4
- Grade Unit
- %
- Intercept
- 4 m
- From
- 40 m
- To
- 44 m
- Intercept Depth
- 40 m
Classification
- Deposit Type
- other
- Program
- exploration
- Sample Type
- drill
- Group ID
- EAL1692:40-44
- Mining Method
- open_pit
QA/QC
- Laboratory
- ALS Laboratories
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Compositing
- Cutoff Grade
- 0.2
- Cutoff Unit
- % Nb₂O₅
- Dilution Disclosed
- Yes
- Max Dilution
- 4 m
Review
- Needs Review
- Yes
- Review Reason
- historical_restatement
- Interp. Status
- scored
- Historical
- Yes
- Historical Source Date
- 2026-09-14T00:00:00.000Z
Dates
- Event date
- 2026-10-20T00:00:00.000Z
Reasoning: A previously reported high-grade niobium intercept that ends in mineralization, providing context for the current results.
Positive factors
- High-grade intercept (2.4% Nb₂O₅ is strong for carbonatite)
- Intercept ends in mineralization
Negative factors
- True width not known
- Stale data re-release
Rejected tags
Rejected tags — excluded from scoring because their label or evidence could not be verified.
Stale Data Re-releaseRejected · negative
Historical results re-announced with no new assays or reinterpretation — low genuine novelty.
Reason: This result was previously reported in September 2026 and is being re-announced for context.
Evidence · text
“building on prior results released in September 2026:”
QA/QC DisclosedRejected · positive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Reason: The release includes detailed QA/QC procedures such as certified laboratories, standards, blanks, and duplicates.
Evidence · text
“Standard field and laboratory QAQC was undertaken and monitored for each batch. Encounter submits an independent suite of certified reference materials and blanks at average ratio of 1:30. ALS Laboratory QAQC involves the use of internal lab standards using certified reference material and blanks as part of in-house laboratory procedures.”
Compositing TransparentRejected · positive
Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Reason: The cut-off grade of 0.2% Nb2O5 and maximum internal dilution of 4m are clearly stated for niobium intercepts.
Evidence · text
“All reported assays have been length weighted, with a nominal 0.2% Nb2O5 lower limit and a maximum of 4m of internal dilution.”
Apparent Width OnlyRejected · negative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Reason: The reported results are downhole length, and the true width geometry of the mineralization is not yet known.
Evidence · text
“Reported results are downhole length. True width geometry of the mineralisation is not yet known due to insufficient drilling in the targeted areas.”
EAL1693Joyce · niobiumGrade: 1Grade Unit: %Intercept: 8 mHistorical resultNeeds review: historical_restatementView all detailsHide details
Identity
- Hole ID
- EAL1693
- Project
- Joyce
- Commodity
- niobium
- Region
- australia_wa
- Reported Region
- australia_wa
- Ticker
- ENR
Geometry
- Grade
- 1
- Grade Unit
- %
- Intercept
- 8 m
- From
- 88 m
- To
- 96 m
- Intercept Depth
- 88 m
Classification
- Deposit Type
- other
- Program
- exploration
- Sample Type
- drill
- Group ID
- EAL1693:88-96
- Mining Method
- open_pit
QA/QC
- Laboratory
- ALS Laboratories
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Compositing
- Cutoff Grade
- 0.2
- Cutoff Unit
- % Nb₂O₅
- Dilution Disclosed
- Yes
- Max Dilution
- 4 m
Review
- Needs Review
- Yes
- Review Reason
- historical_restatement
- Interp. Status
- scored
- Historical
- Yes
- Historical Source Date
- 2026-09-14T00:00:00.000Z
Dates
- Event date
- 2026-10-20T00:00:00.000Z
Reasoning: A previously reported moderate-grade niobium intercept that ends in mineralization, providing context for the current results.
Positive factors
- Moderate-grade intercept (1.0% Nb₂O₅ is moderate for carbonatite)
- Intercept ends in mineralization
Negative factors
- True width not known
- Stale data re-release
Rejected tags
Rejected tags — excluded from scoring because their label or evidence could not be verified.
Stale Data Re-releaseRejected · negative
Historical results re-announced with no new assays or reinterpretation — low genuine novelty.
Reason: This result was previously reported in September 2026 and is being re-announced for context.
Evidence · text
“building on prior results released in September 2026:”
QA/QC DisclosedRejected · positive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Reason: The release includes detailed QA/QC procedures such as certified laboratories, standards, blanks, and duplicates.
Evidence · text
“Standard field and laboratory QAQC was undertaken and monitored for each batch. Encounter submits an independent suite of certified reference materials and blanks at average ratio of 1:30. ALS Laboratory QAQC involves the use of internal lab standards using certified reference material and blanks as part of in-house laboratory procedures.”
Compositing TransparentRejected · positive
Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Reason: The cut-off grade of 0.2% Nb2O5 and maximum internal dilution of 4m are clearly stated for niobium intercepts.
Evidence · text
“All reported assays have been length weighted, with a nominal 0.2% Nb2O5 lower limit and a maximum of 4m of internal dilution.”
Apparent Width OnlyRejected · negative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Reason: The reported results are downhole length, and the true width geometry of the mineralization is not yet known.
Evidence · text
“Reported results are downhole length. True width geometry of the mineralisation is not yet known due to insufficient drilling in the targeted areas.”
EAL1687Joyce · copperGrade: 1404Grade Unit: ppm CuIntercept: 20 mView all detailsHide details
Identity
- Hole ID
- EAL1687
- Project
- Joyce
- Commodity
- copper
- Region
- australia_wa
- Reported Region
- australia_wa
- Ticker
- ENR
Geometry
- Grade
- 1404
- Grade Unit
- ppm Cu
- Intercept
- 20 m
- From
- 67 m
- To
- 87 m
- Hole Depth
- 87 m
- Intercept Depth
- 67 m
Classification
- Deposit Type
- other
- Program
- exploration
- Sample Type
- drill
- Group ID
- EAL1687:67-87
- Mining Method
- open_pit
Location
- Easting
- 446798
- Northing
- 7540997
- CRS
- MGA94_52
- Elevation
- 398 m
- Azimuth
- 0 °
- Dip
- -60 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Laboratories
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Compositing
- Cutoff Grade
- 500
- Cutoff Unit
- ppm Cu
- Dilution Disclosed
- Yes
- Max Dilution
- 1 m
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-10-20T00:00:00.000Z
Reasoning: A new discovery of thick copper anomalism in a previously underexplored region, indicating new exploration potential despite the weak grade and early stage.
Positive factors
- New discovery of thick copper anomalism in West Arunta
- Intercept ends in mineralization
- Located at key regional structural intersection
Negative factors
- Grade is weak for copper
- True width not known
- Potentially leached zone
- Assays pending for additional holes
Rejected tags
Rejected tags — excluded from scoring because their label or evidence could not be verified.
Step-Out ExtensionRejected · positive
Mineralization extended beyond the previously known limit.
Reason: This represents the first identification of thick copper anomalism in the West Arunta.
Evidence · text
“This represents the first identification of thick copper anomalism in the West Arunta.”
QA/QC DisclosedRejected · positive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Reason: The release includes detailed QA/QC procedures such as certified laboratories, standards, blanks, and duplicates.
Evidence · text
“Standard field and laboratory QAQC was undertaken and monitored for each batch. Encounter submits an independent suite of certified reference materials and blanks at average ratio of 1:30. ALS Laboratory QAQC involves the use of internal lab standards using certified reference material and blanks as part of in-house laboratory procedures.”
Compositing TransparentRejected · positive
Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Reason: The cut-off grade of 500ppm Cu and maximum internal dilution of 1m are clearly stated for copper intercepts.
Evidence · text
“Copper intersections have been length weighted and reported above a nominal 500ppm Cu lower limit with a maximum of 1m of internal dilution.”
Apparent Width OnlyRejected · negative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Reason: The reported results are downhole length, and the true width geometry of the mineralization is not yet known.
Evidence · text
“Reported results are downhole length. True width geometry of the mineralisation is not yet known due to insufficient drilling in the targeted areas.”
EAL1687Joyce · copperGrade: 1479Grade Unit: ppm CuIntercept: 18 mView all detailsHide details
Identity
- Hole ID
- EAL1687
- Project
- Joyce
- Commodity
- copper
- Region
- australia_wa
- Reported Region
- australia_wa
- Ticker
- ENR
Geometry
- Grade
- 1479
- Grade Unit
- ppm Cu
- Intercept
- 18 m
- From
- 69 m
- To
- 87 m
- Hole Depth
- 87 m
- Intercept Depth
- 67 m
Classification
- Deposit Type
- other
- Program
- exploration
- Sample Type
- drill
- Group ID
- EAL1687:69-87
- Mining Method
- open_pit
Location
- Easting
- 446798
- Northing
- 7540997
- CRS
- MGA94_52
- Elevation
- 398 m
- Azimuth
- 0 °
- Dip
- -60 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Laboratories
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Compositing
- Cutoff Grade
- 500
- Cutoff Unit
- ppm Cu
- Dilution Disclosed
- Yes
- Max Dilution
- 1 m
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-10-20T00:00:00.000Z
Reasoning: A new discovery of thick copper anomalism in a previously underexplored region, indicating new exploration potential despite the weak grade and early stage.
Positive factors
- New discovery of thick copper anomalism in West Arunta
- Intercept ends in mineralization
- Located at key regional structural intersection
Negative factors
- Grade is weak for copper
- True width not known
- Potentially leached zone
- Assays pending for additional holes
Rejected tags
Rejected tags — excluded from scoring because their label or evidence could not be verified.
Step-Out ExtensionRejected · positive
Mineralization extended beyond the previously known limit.
Reason: This represents the first identification of thick copper anomalism in the West Arunta.
Evidence · text
“This represents the first identification of thick copper anomalism in the West Arunta.”
QA/QC DisclosedRejected · positive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Reason: The release includes detailed QA/QC procedures such as certified laboratories, standards, blanks, and duplicates.
Evidence · text
“Standard field and laboratory QAQC was undertaken and monitored for each batch. Encounter submits an independent suite of certified reference materials and blanks at average ratio of 1:30. ALS Laboratory QAQC involves the use of internal lab standards using certified reference material and blanks as part of in-house laboratory procedures.”
Compositing TransparentRejected · positive
Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Reason: The cut-off grade of 500ppm Cu and maximum internal dilution of 1m are clearly stated for copper intercepts.
Evidence · text
“Copper intersections have been length weighted and reported above a nominal 500ppm Cu lower limit with a maximum of 1m of internal dilution.”
Apparent Width OnlyRejected · negative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Reason: The reported results are downhole length, and the true width geometry of the mineralization is not yet known.
Evidence · text
“Reported results are downhole length. True width geometry of the mineralisation is not yet known due to insufficient drilling in the targeted areas.”
EAL1693Joyce · niobiumGrade: 1.3Grade Unit: %Intercept: 6 mHistorical resultNeeds review: historical_restatementView all detailsHide details
Identity
- Hole ID
- EAL1693
- Project
- Joyce
- Commodity
- niobium
- Region
- australia_wa
- Reported Region
- australia_wa
- Ticker
- ENR
Geometry
- Grade
- 1.3
- Grade Unit
- %
- Intercept
- 6 m
- From
- 88 m
- To
- 94 m
- Intercept Depth
- 88 m
Classification
- Deposit Type
- other
- Program
- exploration
- Sample Type
- drill
- Group ID
- EAL1693:88-94
- Mining Method
- open_pit
QA/QC
- Laboratory
- ALS Laboratories
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Compositing
- Cutoff Grade
- 0.2
- Cutoff Unit
- % Nb₂O₅
- Dilution Disclosed
- Yes
- Max Dilution
- 4 m
Review
- Needs Review
- Yes
- Review Reason
- historical_restatement
- Interp. Status
- scored
- Historical
- Yes
- Historical Source Date
- 2026-09-14T00:00:00.000Z
Dates
- Event date
- 2026-10-20T00:00:00.000Z
Reasoning: A previously reported moderate-grade niobium sub-intercept, providing context for the current results.
Positive factors
- Moderate-grade intercept (1.3% Nb₂O₅ is strong for carbonatite)
- Part of a larger intercept
Negative factors
- True width not known
- Stale data re-release
Rejected tags
Rejected tags — excluded from scoring because their label or evidence could not be verified.
Stale Data Re-releaseRejected · negative
Historical results re-announced with no new assays or reinterpretation — low genuine novelty.
Reason: This result was previously reported in September 2026 and is being re-announced for context.
Evidence · text
“These previously reported results include: − 6m @ 1.3% Nb₂O₅ from 88m within 8m @ 1.0% Nb₂O₅ from 88m to end of hole (EAL1693)”
QA/QC DisclosedRejected · positive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Reason: The release includes detailed QA/QC procedures such as certified laboratories, standards, blanks, and duplicates.
Evidence · text
“Standard field and laboratory QAQC was undertaken and monitored for each batch. Encounter submits an independent suite of certified reference materials and blanks at average ratio of 1:30. ALS Laboratory QAQC involves the use of internal lab standards using certified reference material and blanks as part of in-house laboratory procedures.”
Compositing TransparentRejected · positive
Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Reason: The cut-off grade of 0.2% Nb2O5 and maximum internal dilution of 4m are clearly stated for niobium intercepts.
Evidence · text
“All reported assays have been length weighted, with a nominal 0.2% Nb2O5 lower limit and a maximum of 4m of internal dilution.”
Apparent Width OnlyRejected · negative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Reason: The reported results are downhole length, and the true width geometry of the mineralization is not yet known.
Evidence · text
“Reported results are downhole length. True width geometry of the mineralisation is not yet known due to insufficient drilling in the targeted areas.”
EAL1694Joyce · niobiumGrade: 1.6Grade Unit: %Intercept: 2 mHistorical resultNeeds review: historical_restatementView all detailsHide details
Identity
- Hole ID
- EAL1694
- Project
- Joyce
- Commodity
- niobium
- Region
- australia_wa
- Reported Region
- australia_wa
- Ticker
- ENR
Geometry
- Grade
- 1.6
- Grade Unit
- %
- Intercept
- 2 m
- From
- 34 m
- To
- 36 m
- Intercept Depth
- 34 m
Classification
- Deposit Type
- other
- Program
- exploration
- Sample Type
- drill
- Group ID
- EAL1694:34-36
- Mining Method
- open_pit
QA/QC
- Laboratory
- ALS Laboratories
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Compositing
- Cutoff Grade
- 0.2
- Cutoff Unit
- % Nb₂O₅
- Dilution Disclosed
- Yes
- Max Dilution
- 4 m
Review
- Needs Review
- Yes
- Review Reason
- historical_restatement
- Interp. Status
- scored
- Historical
- Yes
- Historical Source Date
- 2026-09-14T00:00:00.000Z
Dates
- Event date
- 2026-10-20T00:00:00.000Z
Reasoning: A previously reported high-grade niobium sub-intercept, providing context for the current results.
Positive factors
- High-grade intercept (1.6% Nb₂O₅ is strong for carbonatite)
Negative factors
- True width not known
- Stale data re-release
Rejected tags
Rejected tags — excluded from scoring because their label or evidence could not be verified.
Stale Data Re-releaseRejected · negative
Historical results re-announced with no new assays or reinterpretation — low genuine novelty.
Reason: This result was previously reported in September 2026 and is being re-announced for context.
Evidence · text
“These previously reported results include: − 2m @ 1.6% Nb₂O₅ from 34m and 2m @ 1.3% Nb₂O₅ from 86m within 10m @ 0.6% Nb₂O₅ from 86m to end of hole (EAL1694)”
QA/QC DisclosedRejected · positive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Reason: The release includes detailed QA/QC procedures such as certified laboratories, standards, blanks, and duplicates.
Evidence · text
“Standard field and laboratory QAQC was undertaken and monitored for each batch. Encounter submits an independent suite of certified reference materials and blanks at average ratio of 1:30. ALS Laboratory QAQC involves the use of internal lab standards using certified reference material and blanks as part of in-house laboratory procedures.”
Compositing TransparentRejected · positive
Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Reason: The cut-off grade of 0.2% Nb2O5 and maximum internal dilution of 4m are clearly stated for niobium intercepts.
Evidence · text
“All reported assays have been length weighted, with a nominal 0.2% Nb2O5 lower limit and a maximum of 4m of internal dilution.”
Apparent Width OnlyRejected · negative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Reason: The reported results are downhole length, and the true width geometry of the mineralization is not yet known.
Evidence · text
“Reported results are downhole length. True width geometry of the mineralisation is not yet known due to insufficient drilling in the targeted areas.”
EAL1694Joyce · niobiumGrade: 1.3Grade Unit: %Intercept: 2 mHistorical resultNeeds review: historical_restatementView all detailsHide details
Identity
- Hole ID
- EAL1694
- Project
- Joyce
- Commodity
- niobium
- Region
- australia_wa
- Reported Region
- australia_wa
- Ticker
- ENR
Geometry
- Grade
- 1.3
- Grade Unit
- %
- Intercept
- 2 m
- From
- 86 m
- To
- 88 m
- Intercept Depth
- 86 m
Classification
- Deposit Type
- other
- Program
- exploration
- Sample Type
- drill
- Group ID
- EAL1694:86-88
- Mining Method
- open_pit
QA/QC
- Laboratory
- ALS Laboratories
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Compositing
- Cutoff Grade
- 0.2
- Cutoff Unit
- % Nb₂O₅
- Dilution Disclosed
- Yes
- Max Dilution
- 4 m
Review
- Needs Review
- Yes
- Review Reason
- historical_restatement
- Interp. Status
- scored
- Historical
- Yes
- Historical Source Date
- 2026-09-14T00:00:00.000Z
Dates
- Event date
- 2026-10-20T00:00:00.000Z
Reasoning: A previously reported high-grade niobium sub-intercept, providing context for the current results.
Positive factors
- High-grade intercept (1.3% Nb₂O₅ is strong for carbonatite)
Negative factors
- True width not known
- Stale data re-release
Rejected tags
Rejected tags — excluded from scoring because their label or evidence could not be verified.
Stale Data Re-releaseRejected · negative
Historical results re-announced with no new assays or reinterpretation — low genuine novelty.
Reason: This result was previously reported in September 2026 and is being re-announced for context.
Evidence · text
“These previously reported results include: − 2m @ 1.6% Nb₂O₅ from 34m and 2m @ 1.3% Nb₂O₅ from 86m within 10m @ 0.6% Nb₂O₅ from 86m to end of hole (EAL1694)”
QA/QC DisclosedRejected · positive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Reason: The release includes detailed QA/QC procedures such as certified laboratories, standards, blanks, and duplicates.
Evidence · text
“Standard field and laboratory QAQC was undertaken and monitored for each batch. Encounter submits an independent suite of certified reference materials and blanks at average ratio of 1:30. ALS Laboratory QAQC involves the use of internal lab standards using certified reference material and blanks as part of in-house laboratory procedures.”
Compositing TransparentRejected · positive
Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Reason: The cut-off grade of 0.2% Nb2O5 and maximum internal dilution of 4m are clearly stated for niobium intercepts.
Evidence · text
“All reported assays have been length weighted, with a nominal 0.2% Nb2O5 lower limit and a maximum of 4m of internal dilution.”
Apparent Width OnlyRejected · negative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Reason: The reported results are downhole length, and the true width geometry of the mineralization is not yet known.
Evidence · text
“Reported results are downhole length. True width geometry of the mineralisation is not yet known due to insufficient drilling in the targeted areas.”
EAL1694Joyce · niobiumGrade: 0.6Grade Unit: %Intercept: 10 mHistorical resultNeeds review: historical_restatementView all detailsHide details
Identity
- Hole ID
- EAL1694
- Project
- Joyce
- Commodity
- niobium
- Region
- australia_wa
- Reported Region
- australia_wa
- Ticker
- ENR
Geometry
- Grade
- 0.6
- Grade Unit
- %
- Intercept
- 10 m
- From
- 86 m
- To
- 96 m
- Intercept Depth
- 86 m
Classification
- Deposit Type
- other
- Program
- exploration
- Sample Type
- drill
- Group ID
- EAL1694:86-96
- Mining Method
- open_pit
QA/QC
- Laboratory
- ALS Laboratories
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Compositing
- Cutoff Grade
- 0.2
- Cutoff Unit
- % Nb₂O₅
- Dilution Disclosed
- Yes
- Max Dilution
- 4 m
Review
- Needs Review
- Yes
- Review Reason
- historical_restatement
- Interp. Status
- scored
- Historical
- Yes
- Historical Source Date
- 2026-09-14T00:00:00.000Z
Dates
- Event date
- 2026-10-20T00:00:00.000Z
Reasoning: A previously reported moderate-grade niobium intercept that ends in mineralization, providing context for the current results.
Positive factors
- Moderate-grade intercept (0.6% Nb₂O₅ is moderate for carbonatite)
- Thick intercept (10m)
- Intercept ends in mineralization
Negative factors
- True width not known
- Stale data re-release
Rejected tags
Rejected tags — excluded from scoring because their label or evidence could not be verified.
Stale Data Re-releaseRejected · negative
Historical results re-announced with no new assays or reinterpretation — low genuine novelty.
Reason: This result was previously reported in September 2026 and is being re-announced for context.
Evidence · text
“These previously reported results include: − 2m @ 1.6% Nb₂O₅ from 34m and 2m @ 1.3% Nb₂O₅ from 86m within 10m @ 0.6% Nb₂O₅ from 86m to end of hole (EAL1694)”
QA/QC DisclosedRejected · positive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Reason: The release includes detailed QA/QC procedures such as certified laboratories, standards, blanks, and duplicates.
Evidence · text
“Standard field and laboratory QAQC was undertaken and monitored for each batch. Encounter submits an independent suite of certified reference materials and blanks at average ratio of 1:30. ALS Laboratory QAQC involves the use of internal lab standards using certified reference material and blanks as part of in-house laboratory procedures.”
Compositing TransparentRejected · positive
Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Reason: The cut-off grade of 0.2% Nb2O5 and maximum internal dilution of 4m are clearly stated for niobium intercepts.
Evidence · text
“All reported assays have been length weighted, with a nominal 0.2% Nb2O5 lower limit and a maximum of 4m of internal dilution.”
Apparent Width OnlyRejected · negative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Reason: The reported results are downhole length, and the true width geometry of the mineralization is not yet known.
Evidence · text
“Reported results are downhole length. True width geometry of the mineralisation is not yet known due to insufficient drilling in the targeted areas.”
EAL2138Joyce · niobiumGrade: 0.54Grade Unit: %Intercept: 10 mView all detailsHide details
Identity
- Hole ID
- EAL2138
- Project
- Joyce
- Commodity
- niobium
- Region
- australia_wa
- Reported Region
- australia_wa
- Ticker
- ENR
Geometry
- Grade
- 0.54
- Grade Unit
- %
- Intercept
- 10 m
- From
- 51 m
- To
- 61 m
- Hole Depth
- 61 m
- Intercept Depth
- 51 m
Classification
- Deposit Type
- other
- Program
- exploration
- Sample Type
- drill
- Group ID
- EAL2138:51-61
- Mining Method
- open_pit
Location
- Easting
- 447402
- Northing
- 7541674
- CRS
- MGA94_52
- Elevation
- 395 m
- Azimuth
- 0 °
- Dip
- -60 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Laboratories
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Compositing
- Cutoff Grade
- 0.2
- Cutoff Unit
- % Nb₂O₅
- Dilution Disclosed
- Yes
- Max Dilution
- 4 m
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-10-20T00:00:00.000Z
Reasoning: A thick, moderate-grade niobium intercept that ends in mineralization, contributing to the overall understanding of the zone.
Positive factors
- Moderate-grade intercept (0.54% Nb₂O₅ is moderate for carbonatite)
- Thick intercept (10m)
- Intercept ends in mineralization
Negative factors
- True width not known
Rejected tags
Rejected tags — excluded from scoring because their label or evidence could not be verified.
QA/QC DisclosedRejected · positive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Reason: The release includes detailed QA/QC procedures such as certified laboratories, standards, blanks, and duplicates.
Evidence · text
“Standard field and laboratory QAQC was undertaken and monitored for each batch. Encounter submits an independent suite of certified reference materials and blanks at average ratio of 1:30. ALS Laboratory QAQC involves the use of internal lab standards using certified reference material and blanks as part of in-house laboratory procedures.”
Compositing TransparentRejected · positive
Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Reason: The cut-off grade of 0.2% Nb2O5 and maximum internal dilution of 4m are clearly stated for niobium intercepts.
Evidence · text
“All reported assays have been length weighted, with a nominal 0.2% Nb2O5 lower limit and a maximum of 4m of internal dilution.”
Apparent Width OnlyRejected · negative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Reason: The reported results are downhole length, and the true width geometry of the mineralization is not yet known.
Evidence · text
“Reported results are downhole length. True width geometry of the mineralisation is not yet known due to insufficient drilling in the targeted areas.”
EAL2138Joyce · niobiumGrade: 1.51Grade Unit: %Intercept: 1 mView all detailsHide details
Identity
- Hole ID
- EAL2138
- Project
- Joyce
- Commodity
- niobium
- Region
- australia_wa
- Reported Region
- australia_wa
- Ticker
- ENR
Geometry
- Grade
- 1.51
- Grade Unit
- %
- Intercept
- 1 m
- From
- 56 m
- To
- 57 m
- Hole Depth
- 61 m
- Intercept Depth
- 51 m
Classification
- Deposit Type
- other
- Program
- exploration
- Sample Type
- drill
- Group ID
- EAL2138:56-57
- Mining Method
- open_pit
Location
- Easting
- 447402
- Northing
- 7541674
- CRS
- MGA94_52
- Elevation
- 395 m
- Azimuth
- 0 °
- Dip
- -60 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Laboratories
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Compositing
- Cutoff Grade
- 0.2
- Cutoff Unit
- % Nb₂O₅
- Dilution Disclosed
- Yes
- Max Dilution
- 4 m
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-10-20T00:00:00.000Z
Reasoning: A high-grade niobium sub-intercept, contributing to the overall understanding of the zone.
Positive factors
- High-grade intercept (1.51% Nb₂O₅ is strong for carbonatite)
Negative factors
- True width not known
- Narrow intercept (1m)
Rejected tags
Rejected tags — excluded from scoring because their label or evidence could not be verified.
QA/QC DisclosedRejected · positive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Reason: The release includes detailed QA/QC procedures such as certified laboratories, standards, blanks, and duplicates.
Evidence · text
“Standard field and laboratory QAQC was undertaken and monitored for each batch. Encounter submits an independent suite of certified reference materials and blanks at average ratio of 1:30. ALS Laboratory QAQC involves the use of internal lab standards using certified reference material and blanks as part of in-house laboratory procedures.”
Compositing TransparentRejected · positive
Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Reason: The cut-off grade of 0.2% Nb2O5 and maximum internal dilution of 4m are clearly stated for niobium intercepts.
Evidence · text
“All reported assays have been length weighted, with a nominal 0.2% Nb2O5 lower limit and a maximum of 4m of internal dilution.”
Apparent Width OnlyRejected · negative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Reason: The reported results are downhole length, and the true width geometry of the mineralization is not yet known.
Evidence · text
“Reported results are downhole length. True width geometry of the mineralisation is not yet known due to insufficient drilling in the targeted areas.”
EAL2149Joyce · niobiumGrade: 2.56Grade Unit: %Intercept: 12 mView all detailsHide details
Identity
- Hole ID
- EAL2149
- Project
- Joyce
- Commodity
- niobium
- Region
- australia_wa
- Reported Region
- australia_wa
- Ticker
- ENR
Geometry
- Grade
- 2.56
- Grade Unit
- %
- Intercept
- 12 m
- From
- 121 m
- To
- 133 m
- Hole Depth
- 133 m
- Intercept Depth
- 88 m
Classification
- Deposit Type
- other
- Program
- exploration
- Sample Type
- drill
- Group ID
- EAL2149:121-133
- Mining Method
- open_pit
Location
- Easting
- 447000
- Northing
- 7541561
- CRS
- MGA94_52
- Elevation
- 398 m
- Azimuth
- 0 °
- Dip
- -60 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Laboratories
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Compositing
- Cutoff Grade
- 0.2
- Cutoff Unit
- % Nb₂O₅
- Dilution Disclosed
- Yes
- Max Dilution
- 4 m
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-10-20T00:00:00.000Z
Reasoning: A thick, high-grade niobium intercept that ends in mineralization, confirming the continuity of the zone and supporting a maiden resource.
Positive factors
- High-grade intercept (2.56% Nb₂O₅ is strong for carbonatite)
- Thick intercept (12m)
- Intercept ends in mineralization
- Supports maiden resource estimate
Negative factors
- True width not known
Rejected tags
Rejected tags — excluded from scoring because their label or evidence could not be verified.
Bonanza InterceptRejected · positive
Exceptionally high-grade zone, well above the deposit-type norm.
Reason: The intercept of 2.56% Nb₂O₅ is well above the 1.7% high-grade resource component and the invented strong threshold of 1.5% for Nb₂O₅.
Evidence · text
“12m @ 2.56% Nb₂O₅”
Step-Out ExtensionRejected · positive
Mineralization extended beyond the previously known limit.
Reason: These latest results extend the high-grade mineralisation across three drill sections, with thick intersections that end in mineralisation.
Evidence · text
“These latest results extend the high-grade mineralisation across three drill sections, with thick intersections that end in mineralisation.”
QA/QC DisclosedRejected · positive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Reason: The release includes detailed QA/QC procedures such as certified laboratories, standards, blanks, and duplicates.
Evidence · text
“Standard field and laboratory QAQC was undertaken and monitored for each batch. Encounter submits an independent suite of certified reference materials and blanks at average ratio of 1:30. ALS Laboratory QAQC involves the use of internal lab standards using certified reference material and blanks as part of in-house laboratory procedures.”
Compositing TransparentRejected · positive
Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Reason: The cut-off grade of 0.2% Nb2O5 and maximum internal dilution of 4m are clearly stated for niobium intercepts.
Evidence · text
“All reported assays have been length weighted, with a nominal 0.2% Nb2O5 lower limit and a maximum of 4m of internal dilution.”
Apparent Width OnlyRejected · negative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Reason: The reported results are downhole length, and the true width geometry of the mineralization is not yet known.
Evidence · text
“Reported results are downhole length. True width geometry of the mineralisation is not yet known due to insufficient drilling in the targeted areas.”
EAL2149Joyce · rare earth elementsGrade: 0.47Grade Unit: %Intercept: 45 mView all detailsHide details
Identity
- Hole ID
- EAL2149
- Project
- Joyce
- Commodity
- rare earth elements
- Region
- australia_wa
- Reported Region
- australia_wa
- Ticker
- ENR
Geometry
- Grade
- 0.47
- Grade Unit
- %
- Intercept
- 45 m
- From
- 88 m
- To
- 133 m
- Hole Depth
- 133 m
- Intercept Depth
- 88 m
Classification
- Deposit Type
- other
- Program
- exploration
- Sample Type
- drill
- Group ID
- EAL2149:88-133
- Mining Method
- open_pit
Location
- Easting
- 447000
- Northing
- 7541561
- CRS
- MGA94_52
- Elevation
- 398 m
- Azimuth
- 0 °
- Dip
- -60 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Laboratories
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Compositing
- Cutoff Grade
- 0.2
- Cutoff Unit
- % Nb₂O₅
- Dilution Disclosed
- Yes
- Max Dilution
- 4 m
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-10-20T00:00:00.000Z
Reasoning: A thick intercept with significant TREO grades, indicating potential for rare earth elements as a byproduct or co-product.
Positive factors
- Thick intercept (45m)
- Intercept ends in mineralization
- REE are critical minerals
Negative factors
- True width not known
Rejected tags
Rejected tags — excluded from scoring because their label or evidence could not be verified.
QA/QC DisclosedRejected · positive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Reason: The release includes detailed QA/QC procedures such as certified laboratories, standards, blanks, and duplicates.
Evidence · text
“Standard field and laboratory QAQC was undertaken and monitored for each batch. Encounter submits an independent suite of certified reference materials and blanks at average ratio of 1:30. ALS Laboratory QAQC involves the use of internal lab standards using certified reference material and blanks as part of in-house laboratory procedures.”
Compositing TransparentRejected · positive
Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Reason: The cut-off grade of 0.2% Nb2O5 and maximum internal dilution of 4m are clearly stated for niobium intercepts, which also applies to associated REE.
Evidence · text
“All reported assays have been length weighted, with a nominal 0.2% Nb2O5 lower limit and a maximum of 4m of internal dilution.”
Apparent Width OnlyRejected · negative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Reason: The reported results are downhole length, and the true width geometry of the mineralization is not yet known.
Evidence · text
“Reported results are downhole length. True width geometry of the mineralisation is not yet known due to insufficient drilling in the targeted areas.”
EAL2149Joyce · rare earth elementsGrade: 1.43Grade Unit: %Intercept: 1 mView all detailsHide details
Identity
- Hole ID
- EAL2149
- Project
- Joyce
- Commodity
- rare earth elements
- Region
- australia_wa
- Reported Region
- australia_wa
- Ticker
- ENR
Geometry
- Grade
- 1.43
- Grade Unit
- %
- Intercept
- 1 m
- From
- 89 m
- To
- 90 m
- Hole Depth
- 133 m
- Intercept Depth
- 88 m
Classification
- Deposit Type
- other
- Program
- exploration
- Sample Type
- drill
- Group ID
- EAL2149:89-90
- Mining Method
- open_pit
Location
- Easting
- 447000
- Northing
- 7541561
- CRS
- MGA94_52
- Elevation
- 398 m
- Azimuth
- 0 °
- Dip
- -60 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Laboratories
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Compositing
- Cutoff Grade
- 0.2
- Cutoff Unit
- % Nb₂O₅
- Dilution Disclosed
- Yes
- Max Dilution
- 4 m
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-10-20T00:00:00.000Z
Reasoning: A high-grade TREO sub-intercept, indicating significant rare earth element potential.
Positive factors
- High-grade TREO intercept (1.43%)
Negative factors
- True width not known
- Narrow intercept (1m)
Rejected tags
Rejected tags — excluded from scoring because their label or evidence could not be verified.
QA/QC DisclosedRejected · positive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Reason: The release includes detailed QA/QC procedures such as certified laboratories, standards, blanks, and duplicates.
Evidence · text
“Standard field and laboratory QAQC was undertaken and monitored for each batch. Encounter submits an independent suite of certified reference materials and blanks at average ratio of 1:30. ALS Laboratory QAQC involves the use of internal lab standards using certified reference material and blanks as part of in-house laboratory procedures.”
Compositing TransparentRejected · positive
Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Reason: The cut-off grade of 0.2% Nb2O5 and maximum internal dilution of 4m are clearly stated for niobium intercepts, which also applies to associated REE.
Evidence · text
“All reported assays have been length weighted, with a nominal 0.2% Nb2O5 lower limit and a maximum of 4m of internal dilution.”
Apparent Width OnlyRejected · negative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Reason: The reported results are downhole length, and the true width geometry of the mineralization is not yet known.
Evidence · text
“Reported results are downhole length. True width geometry of the mineralisation is not yet known due to insufficient drilling in the targeted areas.”
EAL2149Joyce · rare earth elementsGrade: 0.59Grade Unit: %Intercept: 2 mView all detailsHide details
Identity
- Hole ID
- EAL2149
- Project
- Joyce
- Commodity
- rare earth elements
- Region
- australia_wa
- Reported Region
- australia_wa
- Ticker
- ENR
Geometry
- Grade
- 0.59
- Grade Unit
- %
- Intercept
- 2 m
- From
- 94 m
- To
- 96 m
- Hole Depth
- 133 m
- Intercept Depth
- 88 m
Classification
- Deposit Type
- other
- Program
- exploration
- Sample Type
- drill
- Group ID
- EAL2149:94-96
- Mining Method
- open_pit
Location
- Easting
- 447000
- Northing
- 7541561
- CRS
- MGA94_52
- Elevation
- 398 m
- Azimuth
- 0 °
- Dip
- -60 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Laboratories
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Compositing
- Cutoff Grade
- 0.2
- Cutoff Unit
- % Nb₂O₅
- Dilution Disclosed
- Yes
- Max Dilution
- 4 m
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-10-20T00:00:00.000Z
Reasoning: A moderate-grade TREO sub-intercept, indicating rare earth element potential.
Positive factors
- Moderate-grade TREO intercept (0.59%)
Negative factors
- True width not known
Rejected tags
Rejected tags — excluded from scoring because their label or evidence could not be verified.
QA/QC DisclosedRejected · positive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Reason: The release includes detailed QA/QC procedures such as certified laboratories, standards, blanks, and duplicates.
Evidence · text
“Standard field and laboratory QAQC was undertaken and monitored for each batch. Encounter submits an independent suite of certified reference materials and blanks at average ratio of 1:30. ALS Laboratory QAQC involves the use of internal lab standards using certified reference material and blanks as part of in-house laboratory procedures.”
Compositing TransparentRejected · positive
Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Reason: The cut-off grade of 0.2% Nb2O5 and maximum internal dilution of 4m are clearly stated for niobium intercepts, which also applies to associated REE.
Evidence · text
“All reported assays have been length weighted, with a nominal 0.2% Nb2O5 lower limit and a maximum of 4m of internal dilution.”
Apparent Width OnlyRejected · negative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Reason: The reported results are downhole length, and the true width geometry of the mineralization is not yet known.
Evidence · text
“Reported results are downhole length. True width geometry of the mineralisation is not yet known due to insufficient drilling in the targeted areas.”
EAL2149Joyce · rare earth elementsGrade: 0.72Grade Unit: %Intercept: 2 mView all detailsHide details
Identity
- Hole ID
- EAL2149
- Project
- Joyce
- Commodity
- rare earth elements
- Region
- australia_wa
- Reported Region
- australia_wa
- Ticker
- ENR
Geometry
- Grade
- 0.72
- Grade Unit
- %
- Intercept
- 2 m
- From
- 103 m
- To
- 105 m
- Hole Depth
- 133 m
- Intercept Depth
- 88 m
Classification
- Deposit Type
- other
- Program
- exploration
- Sample Type
- drill
- Group ID
- EAL2149:103-105
- Mining Method
- open_pit
Location
- Easting
- 447000
- Northing
- 7541561
- CRS
- MGA94_52
- Elevation
- 398 m
- Azimuth
- 0 °
- Dip
- -60 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Laboratories
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Compositing
- Cutoff Grade
- 0.2
- Cutoff Unit
- % Nb₂O₅
- Dilution Disclosed
- Yes
- Max Dilution
- 4 m
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-10-20T00:00:00.000Z
Reasoning: A moderate-grade TREO sub-intercept, indicating rare earth element potential.
Positive factors
- Moderate-grade TREO intercept (0.72%)
Negative factors
- True width not known
Rejected tags
Rejected tags — excluded from scoring because their label or evidence could not be verified.
QA/QC DisclosedRejected · positive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Reason: The release includes detailed QA/QC procedures such as certified laboratories, standards, blanks, and duplicates.
Evidence · text
“Standard field and laboratory QAQC was undertaken and monitored for each batch. Encounter submits an independent suite of certified reference materials and blanks at average ratio of 1:30. ALS Laboratory QAQC involves the use of internal lab standards using certified reference material and blanks as part of in-house laboratory procedures.”
Compositing TransparentRejected · positive
Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Reason: The cut-off grade of 0.2% Nb2O5 and maximum internal dilution of 4m are clearly stated for niobium intercepts, which also applies to associated REE.
Evidence · text
“All reported assays have been length weighted, with a nominal 0.2% Nb2O5 lower limit and a maximum of 4m of internal dilution.”
Apparent Width OnlyRejected · negative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Reason: The reported results are downhole length, and the true width geometry of the mineralization is not yet known.
Evidence · text
“Reported results are downhole length. True width geometry of the mineralisation is not yet known due to insufficient drilling in the targeted areas.”
EAL2149Joyce · rare earth elementsGrade: 0.78Grade Unit: %Intercept: 1 mView all detailsHide details
Identity
- Hole ID
- EAL2149
- Project
- Joyce
- Commodity
- rare earth elements
- Region
- australia_wa
- Reported Region
- australia_wa
- Ticker
- ENR
Geometry
- Grade
- 0.78
- Grade Unit
- %
- Intercept
- 1 m
- From
- 107 m
- To
- 108 m
- Hole Depth
- 133 m
- Intercept Depth
- 88 m
Classification
- Deposit Type
- other
- Program
- exploration
- Sample Type
- drill
- Group ID
- EAL2149:107-108
- Mining Method
- open_pit
Location
- Easting
- 447000
- Northing
- 7541561
- CRS
- MGA94_52
- Elevation
- 398 m
- Azimuth
- 0 °
- Dip
- -60 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Laboratories
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Compositing
- Cutoff Grade
- 0.2
- Cutoff Unit
- % Nb₂O₅
- Dilution Disclosed
- Yes
- Max Dilution
- 4 m
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-10-20T00:00:00.000Z
Reasoning: A moderate-grade TREO sub-intercept, indicating rare earth element potential.
Positive factors
- Moderate-grade TREO intercept (0.78%)
Negative factors
- True width not known
- Narrow intercept (1m)
Rejected tags
Rejected tags — excluded from scoring because their label or evidence could not be verified.
QA/QC DisclosedRejected · positive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Reason: The release includes detailed QA/QC procedures such as certified laboratories, standards, blanks, and duplicates.
Evidence · text
“Standard field and laboratory QAQC was undertaken and monitored for each batch. Encounter submits an independent suite of certified reference materials and blanks at average ratio of 1:30. ALS Laboratory QAQC involves the use of internal lab standards using certified reference material and blanks as part of in-house laboratory procedures.”
Compositing TransparentRejected · positive
Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Reason: The cut-off grade of 0.2% Nb2O5 and maximum internal dilution of 4m are clearly stated for niobium intercepts, which also applies to associated REE.
Evidence · text
“All reported assays have been length weighted, with a nominal 0.2% Nb2O5 lower limit and a maximum of 4m of internal dilution.”
Apparent Width OnlyRejected · negative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Reason: The reported results are downhole length, and the true width geometry of the mineralization is not yet known.
Evidence · text
“Reported results are downhole length. True width geometry of the mineralisation is not yet known due to insufficient drilling in the targeted areas.”
EAL2149Joyce · rare earth elementsGrade: 0.3Grade Unit: %Intercept: 1 mView all detailsHide details
Identity
- Hole ID
- EAL2149
- Project
- Joyce
- Commodity
- rare earth elements
- Region
- australia_wa
- Reported Region
- australia_wa
- Ticker
- ENR
Geometry
- Grade
- 0.3
- Grade Unit
- %
- Intercept
- 1 m
- From
- 115 m
- To
- 116 m
- Hole Depth
- 133 m
- Intercept Depth
- 88 m
Classification
- Deposit Type
- other
- Program
- exploration
- Sample Type
- drill
- Group ID
- EAL2149:115-116
- Mining Method
- open_pit
Location
- Easting
- 447000
- Northing
- 7541561
- CRS
- MGA94_52
- Elevation
- 398 m
- Azimuth
- 0 °
- Dip
- -60 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Laboratories
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Compositing
- Cutoff Grade
- 0.2
- Cutoff Unit
- % Nb₂O₅
- Dilution Disclosed
- Yes
- Max Dilution
- 4 m
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-10-20T00:00:00.000Z
Reasoning: A TREO sub-intercept, indicating rare earth element potential.
Positive factors
- TREO intercept
Negative factors
- True width not known
- Narrow intercept (1m)
Rejected tags
Rejected tags — excluded from scoring because their label or evidence could not be verified.
QA/QC DisclosedRejected · positive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Reason: The release includes detailed QA/QC procedures such as certified laboratories, standards, blanks, and duplicates.
Evidence · text
“Standard field and laboratory QAQC was undertaken and monitored for each batch. Encounter submits an independent suite of certified reference materials and blanks at average ratio of 1:30. ALS Laboratory QAQC involves the use of internal lab standards using certified reference material and blanks as part of in-house laboratory procedures.”
Compositing TransparentRejected · positive
Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Reason: The cut-off grade of 0.2% Nb2O5 and maximum internal dilution of 4m are clearly stated for niobium intercepts, which also applies to associated REE.
Evidence · text
“All reported assays have been length weighted, with a nominal 0.2% Nb2O5 lower limit and a maximum of 4m of internal dilution.”
Apparent Width OnlyRejected · negative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Reason: The reported results are downhole length, and the true width geometry of the mineralization is not yet known.
Evidence · text
“Reported results are downhole length. True width geometry of the mineralisation is not yet known due to insufficient drilling in the targeted areas.”
EAL2149Joyce · rare earth elementsGrade: 0.55Grade Unit: %Intercept: 12 mView all detailsHide details
Identity
- Hole ID
- EAL2149
- Project
- Joyce
- Commodity
- rare earth elements
- Region
- australia_wa
- Reported Region
- australia_wa
- Ticker
- ENR
Geometry
- Grade
- 0.55
- Grade Unit
- %
- Intercept
- 12 m
- From
- 121 m
- To
- 133 m
- Hole Depth
- 133 m
- Intercept Depth
- 88 m
Classification
- Deposit Type
- other
- Program
- exploration
- Sample Type
- drill
- Group ID
- EAL2149:121-133
- Mining Method
- open_pit
Location
- Easting
- 447000
- Northing
- 7541561
- CRS
- MGA94_52
- Elevation
- 398 m
- Azimuth
- 0 °
- Dip
- -60 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Laboratories
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Compositing
- Cutoff Grade
- 0.2
- Cutoff Unit
- % Nb₂O₅
- Dilution Disclosed
- Yes
- Max Dilution
- 4 m
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-10-20T00:00:00.000Z
Reasoning: A thick intercept with significant TREO grades, indicating potential for rare earth elements as a byproduct or co-product.
Positive factors
- Thick intercept (12m)
- Intercept ends in mineralization
- REE are critical minerals
Negative factors
- True width not known
Rejected tags
Rejected tags — excluded from scoring because their label or evidence could not be verified.
QA/QC DisclosedRejected · positive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Reason: The release includes detailed QA/QC procedures such as certified laboratories, standards, blanks, and duplicates.
Evidence · text
“Standard field and laboratory QAQC was undertaken and monitored for each batch. Encounter submits an independent suite of certified reference materials and blanks at average ratio of 1:30. ALS Laboratory QAQC involves the use of internal lab standards using certified reference material and blanks as part of in-house laboratory procedures.”
Compositing TransparentRejected · positive
Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Reason: The cut-off grade of 0.2% Nb2O5 and maximum internal dilution of 4m are clearly stated for niobium intercepts, which also applies to associated REE.
Evidence · text
“All reported assays have been length weighted, with a nominal 0.2% Nb2O5 lower limit and a maximum of 4m of internal dilution.”
Apparent Width OnlyRejected · negative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Reason: The reported results are downhole length, and the true width geometry of the mineralization is not yet known.
Evidence · text
“Reported results are downhole length. True width geometry of the mineralisation is not yet known due to insufficient drilling in the targeted areas.”
EAL2149Joyce · rare earth elementsGrade: 0.75Grade Unit: %Intercept: 6 mView all detailsHide details
Identity
- Hole ID
- EAL2149
- Project
- Joyce
- Commodity
- rare earth elements
- Region
- australia_wa
- Reported Region
- australia_wa
- Ticker
- ENR
Geometry
- Grade
- 0.75
- Grade Unit
- %
- Intercept
- 6 m
- From
- 127 m
- To
- 133 m
- Hole Depth
- 133 m
- Intercept Depth
- 88 m
Classification
- Deposit Type
- other
- Program
- exploration
- Sample Type
- drill
- Group ID
- EAL2149:127-133
- Mining Method
- open_pit
Location
- Easting
- 447000
- Northing
- 7541561
- CRS
- MGA94_52
- Elevation
- 398 m
- Azimuth
- 0 °
- Dip
- -60 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Laboratories
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Compositing
- Cutoff Grade
- 0.2
- Cutoff Unit
- % Nb₂O₅
- Dilution Disclosed
- Yes
- Max Dilution
- 4 m
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-10-20T00:00:00.000Z
Reasoning: A moderate-grade TREO sub-intercept that ends in mineralization, indicating potential for rare earth elements as a byproduct or co-product.
Positive factors
- Moderate-grade TREO intercept (0.75%)
- Intercept ends in mineralization
- REE are critical minerals
Negative factors
- True width not known
Rejected tags
Rejected tags — excluded from scoring because their label or evidence could not be verified.
QA/QC DisclosedRejected · positive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Reason: The release includes detailed QA/QC procedures such as certified laboratories, standards, blanks, and duplicates.
Evidence · text
“Standard field and laboratory QAQC was undertaken and monitored for each batch. Encounter submits an independent suite of certified reference materials and blanks at average ratio of 1:30. ALS Laboratory QAQC involves the use of internal lab standards using certified reference material and blanks as part of in-house laboratory procedures.”
Compositing TransparentRejected · positive
Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Reason: The cut-off grade of 0.2% Nb2O5 and maximum internal dilution of 4m are clearly stated for niobium intercepts, which also applies to associated REE.
Evidence · text
“All reported assays have been length weighted, with a nominal 0.2% Nb2O5 lower limit and a maximum of 4m of internal dilution.”
Apparent Width OnlyRejected · negative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Reason: The reported results are downhole length, and the true width geometry of the mineralization is not yet known.
Evidence · text
“Reported results are downhole length. True width geometry of the mineralisation is not yet known due to insufficient drilling in the targeted areas.”
EAL2150Joyce · rare earth elementsGrade: 0.17Grade Unit: %Intercept: 63 mView all detailsHide details
Identity
- Hole ID
- EAL2150
- Project
- Joyce
- Commodity
- rare earth elements
- Region
- australia_wa
- Reported Region
- australia_wa
- Ticker
- ENR
Geometry
- Grade
- 0.17
- Grade Unit
- %
- Intercept
- 63 m
- From
- 52 m
- To
- 115 m
- Hole Depth
- 128 m
- Intercept Depth
- 52 m
Classification
- Deposit Type
- other
- Program
- exploration
- Sample Type
- drill
- Group ID
- EAL2150:52-115
- Mining Method
- open_pit
Location
- Easting
- 447000
- Northing
- 7541643
- CRS
- MGA94_52
- Elevation
- 398 m
- Azimuth
- 0 °
- Dip
- -60 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Laboratories
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Compositing
- Cutoff Grade
- 0.2
- Cutoff Unit
- % Nb₂O₅
- Dilution Disclosed
- Yes
- Max Dilution
- 4 m
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-10-20T00:00:00.000Z
Reasoning: A thick intercept with TREO grades, indicating potential for rare earth elements as a byproduct or co-product.
Positive factors
- Thick intercept (63m)
- REE are critical minerals
Negative factors
- True width not known
Rejected tags
Rejected tags — excluded from scoring because their label or evidence could not be verified.
QA/QC DisclosedRejected · positive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Reason: The release includes detailed QA/QC procedures such as certified laboratories, standards, blanks, and duplicates.
Evidence · text
“Standard field and laboratory QAQC was undertaken and monitored for each batch. Encounter submits an independent suite of certified reference materials and blanks at average ratio of 1:30. ALS Laboratory QAQC involves the use of internal lab standards using certified reference material and blanks as part of in-house laboratory procedures.”
Compositing TransparentRejected · positive
Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Reason: The cut-off grade of 0.2% Nb2O5 and maximum internal dilution of 4m are clearly stated for niobium intercepts, which also applies to associated REE.
Evidence · text
“All reported assays have been length weighted, with a nominal 0.2% Nb2O5 lower limit and a maximum of 4m of internal dilution.”
Apparent Width OnlyRejected · negative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Reason: The reported results are downhole length, and the true width geometry of the mineralization is not yet known.
Evidence · text
“Reported results are downhole length. True width geometry of the mineralisation is not yet known due to insufficient drilling in the targeted areas.”
EAL2150Joyce · rare earth elementsGrade: 0.5Grade Unit: %Intercept: 2 mView all detailsHide details
Identity
- Hole ID
- EAL2150
- Project
- Joyce
- Commodity
- rare earth elements
- Region
- australia_wa
- Reported Region
- australia_wa
- Ticker
- ENR
Geometry
- Grade
- 0.5
- Grade Unit
- %
- Intercept
- 2 m
- From
- 52 m
- To
- 54 m
- Hole Depth
- 128 m
- Intercept Depth
- 52 m
Classification
- Deposit Type
- other
- Program
- exploration
- Sample Type
- drill
- Group ID
- EAL2150:52-54
- Mining Method
- open_pit
Location
- Easting
- 447000
- Northing
- 7541643
- CRS
- MGA94_52
- Elevation
- 398 m
- Azimuth
- 0 °
- Dip
- -60 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Laboratories
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Compositing
- Cutoff Grade
- 0.2
- Cutoff Unit
- % Nb₂O₅
- Dilution Disclosed
- Yes
- Max Dilution
- 4 m
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-10-20T00:00:00.000Z
Reasoning: A moderate-grade TREO sub-intercept, indicating rare earth element potential.
Positive factors
- Moderate-grade TREO intercept (0.5%)
Negative factors
- True width not known
Rejected tags
Rejected tags — excluded from scoring because their label or evidence could not be verified.
QA/QC DisclosedRejected · positive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Reason: The release includes detailed QA/QC procedures such as certified laboratories, standards, blanks, and duplicates.
Evidence · text
“Standard field and laboratory QAQC was undertaken and monitored for each batch. Encounter submits an independent suite of certified reference materials and blanks at average ratio of 1:30. ALS Laboratory QAQC involves the use of internal lab standards using certified reference material and blanks as part of in-house laboratory procedures.”
Compositing TransparentRejected · positive
Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Reason: The cut-off grade of 0.2% Nb2O5 and maximum internal dilution of 4m are clearly stated for niobium intercepts, which also applies to associated REE.
Evidence · text
“All reported assays have been length weighted, with a nominal 0.2% Nb2O5 lower limit and a maximum of 4m of internal dilution.”
Apparent Width OnlyRejected · negative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Reason: The reported results are downhole length, and the true width geometry of the mineralization is not yet known.
Evidence · text
“Reported results are downhole length. True width geometry of the mineralisation is not yet known due to insufficient drilling in the targeted areas.”
EAL2150Joyce · rare earth elementsGrade: 0.25Grade Unit: %Intercept: 4 mView all detailsHide details
Identity
- Hole ID
- EAL2150
- Project
- Joyce
- Commodity
- rare earth elements
- Region
- australia_wa
- Reported Region
- australia_wa
- Ticker
- ENR
Geometry
- Grade
- 0.25
- Grade Unit
- %
- Intercept
- 4 m
- From
- 63 m
- To
- 67 m
- Hole Depth
- 128 m
- Intercept Depth
- 52 m
Classification
- Deposit Type
- other
- Program
- exploration
- Sample Type
- drill
- Group ID
- EAL2150:63-67
- Mining Method
- open_pit
Location
- Easting
- 447000
- Northing
- 7541643
- CRS
- MGA94_52
- Elevation
- 398 m
- Azimuth
- 0 °
- Dip
- -60 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Laboratories
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Compositing
- Cutoff Grade
- 0.2
- Cutoff Unit
- % Nb₂O₅
- Dilution Disclosed
- Yes
- Max Dilution
- 4 m
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-10-20T00:00:00.000Z
Reasoning: A TREO sub-intercept, indicating rare earth element potential.
Positive factors
- TREO intercept
Negative factors
- True width not known
Rejected tags
Rejected tags — excluded from scoring because their label or evidence could not be verified.
QA/QC DisclosedRejected · positive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Reason: The release includes detailed QA/QC procedures such as certified laboratories, standards, blanks, and duplicates.
Evidence · text
“Standard field and laboratory QAQC was undertaken and monitored for each batch. Encounter submits an independent suite of certified reference materials and blanks at average ratio of 1:30. ALS Laboratory QAQC involves the use of internal lab standards using certified reference material and blanks as part of in-house laboratory procedures.”
Compositing TransparentRejected · positive
Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Reason: The cut-off grade of 0.2% Nb2O5 and maximum internal dilution of 4m are clearly stated for niobium intercepts, which also applies to associated REE.
Evidence · text
“All reported assays have been length weighted, with a nominal 0.2% Nb2O5 lower limit and a maximum of 4m of internal dilution.”
Apparent Width OnlyRejected · negative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Reason: The reported results are downhole length, and the true width geometry of the mineralization is not yet known.
Evidence · text
“Reported results are downhole length. True width geometry of the mineralisation is not yet known due to insufficient drilling in the targeted areas.”
EAL2150Joyce · rare earth elementsGrade: 0.08Grade Unit: %Intercept: 8 mView all detailsHide details
Identity
- Hole ID
- EAL2150
- Project
- Joyce
- Commodity
- rare earth elements
- Region
- australia_wa
- Reported Region
- australia_wa
- Ticker
- ENR
Geometry
- Grade
- 0.08
- Grade Unit
- %
- Intercept
- 8 m
- From
- 77 m
- To
- 85 m
- Hole Depth
- 128 m
- Intercept Depth
- 52 m
Classification
- Deposit Type
- other
- Program
- exploration
- Sample Type
- drill
- Group ID
- EAL2150:77-85
- Mining Method
- open_pit
Location
- Easting
- 447000
- Northing
- 7541643
- CRS
- MGA94_52
- Elevation
- 398 m
- Azimuth
- 0 °
- Dip
- -60 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Laboratories
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Compositing
- Cutoff Grade
- 0.2
- Cutoff Unit
- % Nb₂O₅
- Dilution Disclosed
- Yes
- Max Dilution
- 4 m
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-10-20T00:00:00.000Z
Reasoning: A TREO sub-intercept, indicating rare earth element potential.
Positive factors
- TREO intercept
Negative factors
- True width not known
Rejected tags
Rejected tags — excluded from scoring because their label or evidence could not be verified.
QA/QC DisclosedRejected · positive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Reason: The release includes detailed QA/QC procedures such as certified laboratories, standards, blanks, and duplicates.
Evidence · text
“Standard field and laboratory QAQC was undertaken and monitored for each batch. Encounter submits an independent suite of certified reference materials and blanks at average ratio of 1:30. ALS Laboratory QAQC involves the use of internal lab standards using certified reference material and blanks as part of in-house laboratory procedures.”
Compositing TransparentRejected · positive
Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Reason: The cut-off grade of 0.2% Nb2O5 and maximum internal dilution of 4m are clearly stated for niobium intercepts, which also applies to associated REE.
Evidence · text
“All reported assays have been length weighted, with a nominal 0.2% Nb2O5 lower limit and a maximum of 4m of internal dilution.”
Apparent Width OnlyRejected · negative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Reason: The reported results are downhole length, and the true width geometry of the mineralization is not yet known.
Evidence · text
“Reported results are downhole length. True width geometry of the mineralisation is not yet known due to insufficient drilling in the targeted areas.”
EAL2150Joyce · rare earth elementsGrade: 0.18Grade Unit: %Intercept: 2 mView all detailsHide details
Identity
- Hole ID
- EAL2150
- Project
- Joyce
- Commodity
- rare earth elements
- Region
- australia_wa
- Reported Region
- australia_wa
- Ticker
- ENR
Geometry
- Grade
- 0.18
- Grade Unit
- %
- Intercept
- 2 m
- From
- 99 m
- To
- 101 m
- Hole Depth
- 128 m
- Intercept Depth
- 52 m
Classification
- Deposit Type
- other
- Program
- exploration
- Sample Type
- drill
- Group ID
- EAL2150:99-101
- Mining Method
- open_pit
Location
- Easting
- 447000
- Northing
- 7541643
- CRS
- MGA94_52
- Elevation
- 398 m
- Azimuth
- 0 °
- Dip
- -60 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Laboratories
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Compositing
- Cutoff Grade
- 0.2
- Cutoff Unit
- % Nb₂O₅
- Dilution Disclosed
- Yes
- Max Dilution
- 4 m
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-10-20T00:00:00.000Z
Reasoning: A TREO sub-intercept, indicating rare earth element potential.
Positive factors
- TREO intercept
Negative factors
- True width not known
Rejected tags
Rejected tags — excluded from scoring because their label or evidence could not be verified.
QA/QC DisclosedRejected · positive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Reason: The release includes detailed QA/QC procedures such as certified laboratories, standards, blanks, and duplicates.
Evidence · text
“Standard field and laboratory QAQC was undertaken and monitored for each batch. Encounter submits an independent suite of certified reference materials and blanks at average ratio of 1:30. ALS Laboratory QAQC involves the use of internal lab standards using certified reference material and blanks as part of in-house laboratory procedures.”
Compositing TransparentRejected · positive
Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Reason: The cut-off grade of 0.2% Nb2O5 and maximum internal dilution of 4m are clearly stated for niobium intercepts, which also applies to associated REE.
Evidence · text
“All reported assays have been length weighted, with a nominal 0.2% Nb2O5 lower limit and a maximum of 4m of internal dilution.”
Apparent Width OnlyRejected · negative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Reason: The reported results are downhole length, and the true width geometry of the mineralization is not yet known.
Evidence · text
“Reported results are downhole length. True width geometry of the mineralisation is not yet known due to insufficient drilling in the targeted areas.”
EAL2150Joyce · rare earth elementsGrade: 0.13Grade Unit: %Intercept: 1 mView all detailsHide details
Identity
- Hole ID
- EAL2150
- Project
- Joyce
- Commodity
- rare earth elements
- Region
- australia_wa
- Reported Region
- australia_wa
- Ticker
- ENR
Geometry
- Grade
- 0.13
- Grade Unit
- %
- Intercept
- 1 m
- From
- 120 m
- To
- 121 m
- Hole Depth
- 128 m
- Intercept Depth
- 52 m
Classification
- Deposit Type
- other
- Program
- exploration
- Sample Type
- drill
- Group ID
- EAL2150:120-121
- Mining Method
- open_pit
Location
- Easting
- 447000
- Northing
- 7541643
- CRS
- MGA94_52
- Elevation
- 398 m
- Azimuth
- 0 °
- Dip
- -60 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Laboratories
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Compositing
- Cutoff Grade
- 0.2
- Cutoff Unit
- % Nb₂O₅
- Dilution Disclosed
- Yes
- Max Dilution
- 4 m
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-10-20T00:00:00.000Z
Reasoning: A TREO sub-intercept, indicating rare earth element potential.
Positive factors
- TREO intercept
Negative factors
- True width not known
- Narrow intercept (1m)
Rejected tags
Rejected tags — excluded from scoring because their label or evidence could not be verified.
QA/QC DisclosedRejected · positive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Reason: The release includes detailed QA/QC procedures such as certified laboratories, standards, blanks, and duplicates.
Evidence · text
“Standard field and laboratory QAQC was undertaken and monitored for each batch. Encounter submits an independent suite of certified reference materials and blanks at average ratio of 1:30. ALS Laboratory QAQC involves the use of internal lab standards using certified reference material and blanks as part of in-house laboratory procedures.”
Compositing TransparentRejected · positive
Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Reason: The cut-off grade of 0.2% Nb2O5 and maximum internal dilution of 4m are clearly stated for niobium intercepts, which also applies to associated REE.
Evidence · text
“All reported assays have been length weighted, with a nominal 0.2% Nb2O5 lower limit and a maximum of 4m of internal dilution.”
Apparent Width OnlyRejected · negative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Reason: The reported results are downhole length, and the true width geometry of the mineralization is not yet known.
Evidence · text
“Reported results are downhole length. True width geometry of the mineralisation is not yet known due to insufficient drilling in the targeted areas.”
EAL2150Joyce · rare earth elementsGrade: 0.12Grade Unit: %Intercept: 1 mView all detailsHide details
Identity
- Hole ID
- EAL2150
- Project
- Joyce
- Commodity
- rare earth elements
- Region
- australia_wa
- Reported Region
- australia_wa
- Ticker
- ENR
Geometry
- Grade
- 0.12
- Grade Unit
- %
- Intercept
- 1 m
- From
- 123 m
- To
- 124 m
- Hole Depth
- 128 m
- Intercept Depth
- 52 m
Classification
- Deposit Type
- other
- Program
- exploration
- Sample Type
- drill
- Group ID
- EAL2150:123-124
- Mining Method
- open_pit
Location
- Easting
- 447000
- Northing
- 7541643
- CRS
- MGA94_52
- Elevation
- 398 m
- Azimuth
- 0 °
- Dip
- -60 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Laboratories
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Compositing
- Cutoff Grade
- 0.2
- Cutoff Unit
- % Nb₂O₅
- Dilution Disclosed
- Yes
- Max Dilution
- 4 m
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-10-20T00:00:00.000Z
Reasoning: A TREO sub-intercept, indicating rare earth element potential.
Positive factors
- TREO intercept
Negative factors
- True width not known
- Narrow intercept (1m)
Rejected tags
Rejected tags — excluded from scoring because their label or evidence could not be verified.
QA/QC DisclosedRejected · positive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Reason: The release includes detailed QA/QC procedures such as certified laboratories, standards, blanks, and duplicates.
Evidence · text
“Standard field and laboratory QAQC was undertaken and monitored for each batch. Encounter submits an independent suite of certified reference materials and blanks at average ratio of 1:30. ALS Laboratory QAQC involves the use of internal lab standards using certified reference material and blanks as part of in-house laboratory procedures.”
Compositing TransparentRejected · positive
Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Reason: The cut-off grade of 0.2% Nb2O5 and maximum internal dilution of 4m are clearly stated for niobium intercepts, which also applies to associated REE.
Evidence · text
“All reported assays have been length weighted, with a nominal 0.2% Nb2O5 lower limit and a maximum of 4m of internal dilution.”
Apparent Width OnlyRejected · negative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Reason: The reported results are downhole length, and the true width geometry of the mineralization is not yet known.
Evidence · text
“Reported results are downhole length. True width geometry of the mineralisation is not yet known due to insufficient drilling in the targeted areas.”
EAL2149Joyce · phosphorusGrade: 2.5Grade Unit: %Intercept: 45 mView all detailsHide details
Identity
- Hole ID
- EAL2149
- Project
- Joyce
- Commodity
- phosphorus
- Region
- australia_wa
- Reported Region
- australia_wa
- Ticker
- ENR
Geometry
- Grade
- 2.5
- Grade Unit
- %
- Intercept
- 45 m
- From
- 88 m
- To
- 133 m
- Hole Depth
- 133 m
- Intercept Depth
- 88 m
Classification
- Deposit Type
- other
- Program
- exploration
- Sample Type
- drill
- Group ID
- EAL2149:88-133
- Mining Method
- open_pit
Location
- Easting
- 447000
- Northing
- 7541561
- CRS
- MGA94_52
- Elevation
- 398 m
- Azimuth
- 0 °
- Dip
- -60 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Laboratories
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Compositing
- Cutoff Grade
- 0.2
- Cutoff Unit
- % Nb₂O₅
- Dilution Disclosed
- Yes
- Max Dilution
- 4 m
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-10-20T00:00:00.000Z
Reasoning: A thick intercept with significant P2O5 grades, indicating potential for phosphorus as a byproduct or co-product.
Positive factors
- Thick intercept (45m)
- Intercept ends in mineralization
- Phosphorus is a critical mineral
Negative factors
- True width not known
Rejected tags
Rejected tags — excluded from scoring because their label or evidence could not be verified.
QA/QC DisclosedRejected · positive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Reason: The release includes detailed QA/QC procedures such as certified laboratories, standards, blanks, and duplicates.
Evidence · text
“Standard field and laboratory QAQC was undertaken and monitored for each batch. Encounter submits an independent suite of certified reference materials and blanks at average ratio of 1:30. ALS Laboratory QAQC involves the use of internal lab standards using certified reference material and blanks as part of in-house laboratory procedures.”
Compositing TransparentRejected · positive
Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Reason: The cut-off grade of 0.2% Nb2O5 and maximum internal dilution of 4m are clearly stated for niobium intercepts, which also applies to associated P2O5.
Evidence · text
“All reported assays have been length weighted, with a nominal 0.2% Nb2O5 lower limit and a maximum of 4m of internal dilution.”
Apparent Width OnlyRejected · negative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Reason: The reported results are downhole length, and the true width geometry of the mineralization is not yet known.
Evidence · text
“Reported results are downhole length. True width geometry of the mineralisation is not yet known due to insufficient drilling in the targeted areas.”
EAL2149Joyce · phosphorusGrade: 5.2Grade Unit: %Intercept: 1 mView all detailsHide details
Identity
- Hole ID
- EAL2149
- Project
- Joyce
- Commodity
- phosphorus
- Region
- australia_wa
- Reported Region
- australia_wa
- Ticker
- ENR
Geometry
- Grade
- 5.2
- Grade Unit
- %
- Intercept
- 1 m
- From
- 89 m
- To
- 90 m
- Hole Depth
- 133 m
- Intercept Depth
- 88 m
Classification
- Deposit Type
- other
- Program
- exploration
- Sample Type
- drill
- Group ID
- EAL2149:89-90
- Mining Method
- open_pit
Location
- Easting
- 447000
- Northing
- 7541561
- CRS
- MGA94_52
- Elevation
- 398 m
- Azimuth
- 0 °
- Dip
- -60 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Laboratories
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Compositing
- Cutoff Grade
- 0.2
- Cutoff Unit
- % Nb₂O₅
- Dilution Disclosed
- Yes
- Max Dilution
- 4 m
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-10-20T00:00:00.000Z
Reasoning: A high-grade P2O5 sub-intercept, indicating significant phosphorus potential.
Positive factors
- High-grade P2O5 intercept (5.2%)
Negative factors
- True width not known
- Narrow intercept (1m)
Rejected tags
Rejected tags — excluded from scoring because their label or evidence could not be verified.
QA/QC DisclosedRejected · positive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Reason: The release includes detailed QA/QC procedures such as certified laboratories, standards, blanks, and duplicates.
Evidence · text
“Standard field and laboratory QAQC was undertaken and monitored for each batch. Encounter submits an independent suite of certified reference materials and blanks at average ratio of 1:30. ALS Laboratory QAQC involves the use of internal lab standards using certified reference material and blanks as part of in-house laboratory procedures.”
Compositing TransparentRejected · positive
Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Reason: The cut-off grade of 0.2% Nb2O5 and maximum internal dilution of 4m are clearly stated for niobium intercepts, which also applies to associated P2O5.
Evidence · text
“All reported assays have been length weighted, with a nominal 0.2% Nb2O5 lower limit and a maximum of 4m of internal dilution.”
Apparent Width OnlyRejected · negative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Reason: The reported results are downhole length, and the true width geometry of the mineralization is not yet known.
Evidence · text
“Reported results are downhole length. True width geometry of the mineralisation is not yet known due to insufficient drilling in the targeted areas.”
EAL2149Joyce · phosphorusGrade: 3.5Grade Unit: %Intercept: 2 mView all detailsHide details
Identity
- Hole ID
- EAL2149
- Project
- Joyce
- Commodity
- phosphorus
- Region
- australia_wa
- Reported Region
- australia_wa
- Ticker
- ENR
Geometry
- Grade
- 3.5
- Grade Unit
- %
- Intercept
- 2 m
- From
- 94 m
- To
- 96 m
- Hole Depth
- 133 m
- Intercept Depth
- 88 m
Classification
- Deposit Type
- other
- Program
- exploration
- Sample Type
- drill
- Group ID
- EAL2149:94-96
- Mining Method
- open_pit
Location
- Easting
- 447000
- Northing
- 7541561
- CRS
- MGA94_52
- Elevation
- 398 m
- Azimuth
- 0 °
- Dip
- -60 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Laboratories
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Compositing
- Cutoff Grade
- 0.2
- Cutoff Unit
- % Nb₂O₅
- Dilution Disclosed
- Yes
- Max Dilution
- 4 m
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-10-20T00:00:00.000Z
Reasoning: A high-grade P2O5 sub-intercept, indicating significant phosphorus potential.
Positive factors
- High-grade P2O5 intercept (3.5%)
Negative factors
- True width not known
Rejected tags
Rejected tags — excluded from scoring because their label or evidence could not be verified.
QA/QC DisclosedRejected · positive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Reason: The release includes detailed QA/QC procedures such as certified laboratories, standards, blanks, and duplicates.
Evidence · text
“Standard field and laboratory QAQC was undertaken and monitored for each batch. Encounter submits an independent suite of certified reference materials and blanks at average ratio of 1:30. ALS Laboratory QAQC involves the use of internal lab standards using certified reference material and blanks as part of in-house laboratory procedures.”
Compositing TransparentRejected · positive
Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Reason: The cut-off grade of 0.2% Nb2O5 and maximum internal dilution of 4m are clearly stated for niobium intercepts, which also applies to associated P2O5.
Evidence · text
“All reported assays have been length weighted, with a nominal 0.2% Nb2O5 lower limit and a maximum of 4m of internal dilution.”
Apparent Width OnlyRejected · negative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Reason: The reported results are downhole length, and the true width geometry of the mineralization is not yet known.
Evidence · text
“Reported results are downhole length. True width geometry of the mineralisation is not yet known due to insufficient drilling in the targeted areas.”
EAL2149Joyce · phosphorusGrade: 4.3Grade Unit: %Intercept: 2 mView all detailsHide details
Identity
- Hole ID
- EAL2149
- Project
- Joyce
- Commodity
- phosphorus
- Region
- australia_wa
- Reported Region
- australia_wa
- Ticker
- ENR
Geometry
- Grade
- 4.3
- Grade Unit
- %
- Intercept
- 2 m
- From
- 103 m
- To
- 105 m
- Hole Depth
- 133 m
- Intercept Depth
- 88 m
Classification
- Deposit Type
- other
- Program
- exploration
- Sample Type
- drill
- Group ID
- EAL2149:103-105
- Mining Method
- open_pit
Location
- Easting
- 447000
- Northing
- 7541561
- CRS
- MGA94_52
- Elevation
- 398 m
- Azimuth
- 0 °
- Dip
- -60 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Laboratories
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Compositing
- Cutoff Grade
- 0.2
- Cutoff Unit
- % Nb₂O₅
- Dilution Disclosed
- Yes
- Max Dilution
- 4 m
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-10-20T00:00:00.000Z
Reasoning: A high-grade P2O5 sub-intercept, indicating significant phosphorus potential.
Positive factors
- High-grade P2O5 intercept (4.3%)
Negative factors
- True width not known
Rejected tags
Rejected tags — excluded from scoring because their label or evidence could not be verified.
QA/QC DisclosedRejected · positive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Reason: The release includes detailed QA/QC procedures such as certified laboratories, standards, blanks, and duplicates.
Evidence · text
“Standard field and laboratory QAQC was undertaken and monitored for each batch. Encounter submits an independent suite of certified reference materials and blanks at average ratio of 1:30. ALS Laboratory QAQC involves the use of internal lab standards using certified reference material and blanks as part of in-house laboratory procedures.”
Compositing TransparentRejected · positive
Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Reason: The cut-off grade of 0.2% Nb2O5 and maximum internal dilution of 4m are clearly stated for niobium intercepts, which also applies to associated P2O5.
Evidence · text
“All reported assays have been length weighted, with a nominal 0.2% Nb2O5 lower limit and a maximum of 4m of internal dilution.”
Apparent Width OnlyRejected · negative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Reason: The reported results are downhole length, and the true width geometry of the mineralization is not yet known.
Evidence · text
“Reported results are downhole length. True width geometry of the mineralisation is not yet known due to insufficient drilling in the targeted areas.”
EAL2149Joyce · phosphorusGrade: 2.6Grade Unit: %Intercept: 1 mView all detailsHide details
Identity
- Hole ID
- EAL2149
- Project
- Joyce
- Commodity
- phosphorus
- Region
- australia_wa
- Reported Region
- australia_wa
- Ticker
- ENR
Geometry
- Grade
- 2.6
- Grade Unit
- %
- Intercept
- 1 m
- From
- 107 m
- To
- 108 m
- Hole Depth
- 133 m
- Intercept Depth
- 88 m
Classification
- Deposit Type
- other
- Program
- exploration
- Sample Type
- drill
- Group ID
- EAL2149:107-108
- Mining Method
- open_pit
Location
- Easting
- 447000
- Northing
- 7541561
- CRS
- MGA94_52
- Elevation
- 398 m
- Azimuth
- 0 °
- Dip
- -60 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Laboratories
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Compositing
- Cutoff Grade
- 0.2
- Cutoff Unit
- % Nb₂O₅
- Dilution Disclosed
- Yes
- Max Dilution
- 4 m
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-10-20T00:00:00.000Z
Reasoning: A high-grade P2O5 sub-intercept, indicating significant phosphorus potential.
Positive factors
- High-grade P2O5 intercept (2.6%)
Negative factors
- True width not known
- Narrow intercept (1m)
Rejected tags
Rejected tags — excluded from scoring because their label or evidence could not be verified.
QA/QC DisclosedRejected · positive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Reason: The release includes detailed QA/QC procedures such as certified laboratories, standards, blanks, and duplicates.
Evidence · text
“Standard field and laboratory QAQC was undertaken and monitored for each batch. Encounter submits an independent suite of certified reference materials and blanks at average ratio of 1:30. ALS Laboratory QAQC involves the use of internal lab standards using certified reference material and blanks as part of in-house laboratory procedures.”
Compositing TransparentRejected · positive
Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Reason: The cut-off grade of 0.2% Nb2O5 and maximum internal dilution of 4m are clearly stated for niobium intercepts, which also applies to associated P2O5.
Evidence · text
“All reported assays have been length weighted, with a nominal 0.2% Nb2O5 lower limit and a maximum of 4m of internal dilution.”
Apparent Width OnlyRejected · negative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Reason: The reported results are downhole length, and the true width geometry of the mineralization is not yet known.
Evidence · text
“Reported results are downhole length. True width geometry of the mineralisation is not yet known due to insufficient drilling in the targeted areas.”
EAL2149Joyce · phosphorusGrade: 2Grade Unit: %Intercept: 1 mView all detailsHide details
Identity
- Hole ID
- EAL2149
- Project
- Joyce
- Commodity
- phosphorus
- Region
- australia_wa
- Reported Region
- australia_wa
- Ticker
- ENR
Geometry
- Grade
- 2
- Grade Unit
- %
- Intercept
- 1 m
- From
- 115 m
- To
- 116 m
- Hole Depth
- 133 m
- Intercept Depth
- 88 m
Classification
- Deposit Type
- other
- Program
- exploration
- Sample Type
- drill
- Group ID
- EAL2149:115-116
- Mining Method
- open_pit
Location
- Easting
- 447000
- Northing
- 7541561
- CRS
- MGA94_52
- Elevation
- 398 m
- Azimuth
- 0 °
- Dip
- -60 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Laboratories
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Compositing
- Cutoff Grade
- 0.2
- Cutoff Unit
- % Nb₂O₅
- Dilution Disclosed
- Yes
- Max Dilution
- 4 m
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-10-20T00:00:00.000Z
Reasoning: A high-grade P2O5 sub-intercept, indicating significant phosphorus potential.
Positive factors
- High-grade P2O5 intercept (2.0%)
Negative factors
- True width not known
- Narrow intercept (1m)
Rejected tags
Rejected tags — excluded from scoring because their label or evidence could not be verified.
QA/QC DisclosedRejected · positive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Reason: The release includes detailed QA/QC procedures such as certified laboratories, standards, blanks, and duplicates.
Evidence · text
“Standard field and laboratory QAQC was undertaken and monitored for each batch. Encounter submits an independent suite of certified reference materials and blanks at average ratio of 1:30. ALS Laboratory QAQC involves the use of internal lab standards using certified reference material and blanks as part of in-house laboratory procedures.”
Compositing TransparentRejected · positive
Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Reason: The cut-off grade of 0.2% Nb2O5 and maximum internal dilution of 4m are clearly stated for niobium intercepts, which also applies to associated P2O5.
Evidence · text
“All reported assays have been length weighted, with a nominal 0.2% Nb2O5 lower limit and a maximum of 4m of internal dilution.”
Apparent Width OnlyRejected · negative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Reason: The reported results are downhole length, and the true width geometry of the mineralization is not yet known.
Evidence · text
“Reported results are downhole length. True width geometry of the mineralisation is not yet known due to insufficient drilling in the targeted areas.”
EAL2149Joyce · phosphorusGrade: 2.1Grade Unit: %Intercept: 12 mView all detailsHide details
Identity
- Hole ID
- EAL2149
- Project
- Joyce
- Commodity
- phosphorus
- Region
- australia_wa
- Reported Region
- australia_wa
- Ticker
- ENR
Geometry
- Grade
- 2.1
- Grade Unit
- %
- Intercept
- 12 m
- From
- 121 m
- To
- 133 m
- Hole Depth
- 133 m
- Intercept Depth
- 88 m
Classification
- Deposit Type
- other
- Program
- exploration
- Sample Type
- drill
- Group ID
- EAL2149:121-133
- Mining Method
- open_pit
Location
- Easting
- 447000
- Northing
- 7541561
- CRS
- MGA94_52
- Elevation
- 398 m
- Azimuth
- 0 °
- Dip
- -60 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Laboratories
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Compositing
- Cutoff Grade
- 0.2
- Cutoff Unit
- % Nb₂O₅
- Dilution Disclosed
- Yes
- Max Dilution
- 4 m
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-10-20T00:00:00.000Z
Reasoning: A thick intercept with significant P2O5 grades, indicating potential for phosphorus as a byproduct or co-product.
Positive factors
- Thick intercept (12m)
- Intercept ends in mineralization
- Phosphorus is a critical mineral
Negative factors
- True width not known
Rejected tags
Rejected tags — excluded from scoring because their label or evidence could not be verified.
QA/QC DisclosedRejected · positive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Reason: The release includes detailed QA/QC procedures such as certified laboratories, standards, blanks, and duplicates.
Evidence · text
“Standard field and laboratory QAQC was undertaken and monitored for each batch. Encounter submits an independent suite of certified reference materials and blanks at average ratio of 1:30. ALS Laboratory QAQC involves the use of internal lab standards using certified reference material and blanks as part of in-house laboratory procedures.”
Compositing TransparentRejected · positive
Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Reason: The cut-off grade of 0.2% Nb2O5 and maximum internal dilution of 4m are clearly stated for niobium intercepts, which also applies to associated P2O5.
Evidence · text
“All reported assays have been length weighted, with a nominal 0.2% Nb2O5 lower limit and a maximum of 4m of internal dilution.”
Apparent Width OnlyRejected · negative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Reason: The reported results are downhole length, and the true width geometry of the mineralization is not yet known.
Evidence · text
“Reported results are downhole length. True width geometry of the mineralisation is not yet known due to insufficient drilling in the targeted areas.”
EAL2149Joyce · phosphorusGrade: 2.3Grade Unit: %Intercept: 6 mView all detailsHide details
Identity
- Hole ID
- EAL2149
- Project
- Joyce
- Commodity
- phosphorus
- Region
- australia_wa
- Reported Region
- australia_wa
- Ticker
- ENR
Geometry
- Grade
- 2.3
- Grade Unit
- %
- Intercept
- 6 m
- From
- 127 m
- To
- 133 m
- Hole Depth
- 133 m
- Intercept Depth
- 88 m
Classification
- Deposit Type
- other
- Program
- exploration
- Sample Type
- drill
- Group ID
- EAL2149:127-133
- Mining Method
- open_pit
Location
- Easting
- 447000
- Northing
- 7541561
- CRS
- MGA94_52
- Elevation
- 398 m
- Azimuth
- 0 °
- Dip
- -60 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Laboratories
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Compositing
- Cutoff Grade
- 0.2
- Cutoff Unit
- % Nb₂O₅
- Dilution Disclosed
- Yes
- Max Dilution
- 4 m
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-10-20T00:00:00.000Z
Reasoning: A high-grade P2O5 sub-intercept that ends in mineralization, indicating potential for phosphorus as a byproduct or co-product.
Positive factors
- High-grade P2O5 intercept (2.3%)
- Intercept ends in mineralization
- Phosphorus is a critical mineral
Negative factors
- True width not known
Rejected tags
Rejected tags — excluded from scoring because their label or evidence could not be verified.
QA/QC DisclosedRejected · positive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Reason: The release includes detailed QA/QC procedures such as certified laboratories, standards, blanks, and duplicates.
Evidence · text
“Standard field and laboratory QAQC was undertaken and monitored for each batch. Encounter submits an independent suite of certified reference materials and blanks at average ratio of 1:30. ALS Laboratory QAQC involves the use of internal lab standards using certified reference material and blanks as part of in-house laboratory procedures.”
Compositing TransparentRejected · positive
Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Reason: The cut-off grade of 0.2% Nb2O5 and maximum internal dilution of 4m are clearly stated for niobium intercepts, which also applies to associated P2O5.
Evidence · text
“All reported assays have been length weighted, with a nominal 0.2% Nb2O5 lower limit and a maximum of 4m of internal dilution.”
Apparent Width OnlyRejected · negative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Reason: The reported results are downhole length, and the true width geometry of the mineralization is not yet known.
Evidence · text
“Reported results are downhole length. True width geometry of the mineralisation is not yet known due to insufficient drilling in the targeted areas.”
EAL2150Joyce · phosphorusGrade: 0.7Grade Unit: %Intercept: 63 mView all detailsHide details
Identity
- Hole ID
- EAL2150
- Project
- Joyce
- Commodity
- phosphorus
- Region
- australia_wa
- Reported Region
- australia_wa
- Ticker
- ENR
Geometry
- Grade
- 0.7
- Grade Unit
- %
- Intercept
- 63 m
- From
- 52 m
- To
- 115 m
- Hole Depth
- 128 m
- Intercept Depth
- 52 m
Classification
- Deposit Type
- other
- Program
- exploration
- Sample Type
- drill
- Group ID
- EAL2150:52-115
- Mining Method
- open_pit
Location
- Easting
- 447000
- Northing
- 7541643
- CRS
- MGA94_52
- Elevation
- 398 m
- Azimuth
- 0 °
- Dip
- -60 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Laboratories
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Compositing
- Cutoff Grade
- 0.2
- Cutoff Unit
- % Nb₂O₅
- Dilution Disclosed
- Yes
- Max Dilution
- 4 m
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-10-20T00:00:00.000Z
Reasoning: A thick intercept with P2O5 grades, indicating potential for phosphorus as a byproduct or co-product.
Positive factors
- Thick intercept (63m)
- Phosphorus is a critical mineral
Negative factors
- True width not known
Rejected tags
Rejected tags — excluded from scoring because their label or evidence could not be verified.
QA/QC DisclosedRejected · positive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Reason: The release includes detailed QA/QC procedures such as certified laboratories, standards, blanks, and duplicates.
Evidence · text
“Standard field and laboratory QAQC was undertaken and monitored for each batch. Encounter submits an independent suite of certified reference materials and blanks at average ratio of 1:30. ALS Laboratory QAQC involves the use of internal lab standards using certified reference material and blanks as part of in-house laboratory procedures.”
Compositing TransparentRejected · positive
Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Reason: The cut-off grade of 0.2% Nb2O5 and maximum internal dilution of 4m are clearly stated for niobium intercepts, which also applies to associated P2O5.
Evidence · text
“All reported assays have been length weighted, with a nominal 0.2% Nb2O5 lower limit and a maximum of 4m of internal dilution.”
Apparent Width OnlyRejected · negative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Reason: The reported results are downhole length, and the true width geometry of the mineralization is not yet known.
Evidence · text
“Reported results are downhole length. True width geometry of the mineralisation is not yet known due to insufficient drilling in the targeted areas.”
EAL2150Joyce · phosphorusGrade: 1Grade Unit: %Intercept: 2 mView all detailsHide details
Identity
- Hole ID
- EAL2150
- Project
- Joyce
- Commodity
- phosphorus
- Region
- australia_wa
- Reported Region
- australia_wa
- Ticker
- ENR
Geometry
- Grade
- 1
- Grade Unit
- %
- Intercept
- 2 m
- From
- 52 m
- To
- 54 m
- Hole Depth
- 128 m
- Intercept Depth
- 52 m
Classification
- Deposit Type
- other
- Program
- exploration
- Sample Type
- drill
- Group ID
- EAL2150:52-54
- Mining Method
- open_pit
Location
- Easting
- 447000
- Northing
- 7541643
- CRS
- MGA94_52
- Elevation
- 398 m
- Azimuth
- 0 °
- Dip
- -60 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Laboratories
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Compositing
- Cutoff Grade
- 0.2
- Cutoff Unit
- % Nb₂O₅
- Dilution Disclosed
- Yes
- Max Dilution
- 4 m
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-10-20T00:00:00.000Z
Reasoning: A high-grade P2O5 sub-intercept, indicating significant phosphorus potential.
Positive factors
- High-grade P2O5 intercept (1.0%)
Negative factors
- True width not known
Rejected tags
Rejected tags — excluded from scoring because their label or evidence could not be verified.
QA/QC DisclosedRejected · positive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Reason: The release includes detailed QA/QC procedures such as certified laboratories, standards, blanks, and duplicates.
Evidence · text
“Standard field and laboratory QAQC was undertaken and monitored for each batch. Encounter submits an independent suite of certified reference materials and blanks at average ratio of 1:30. ALS Laboratory QAQC involves the use of internal lab standards using certified reference material and blanks as part of in-house laboratory procedures.”
Compositing TransparentRejected · positive
Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Reason: The cut-off grade of 0.2% Nb2O5 and maximum internal dilution of 4m are clearly stated for niobium intercepts, which also applies to associated P2O5.
Evidence · text
“All reported assays have been length weighted, with a nominal 0.2% Nb2O5 lower limit and a maximum of 4m of internal dilution.”
Apparent Width OnlyRejected · negative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Reason: The reported results are downhole length, and the true width geometry of the mineralization is not yet known.
Evidence · text
“Reported results are downhole length. True width geometry of the mineralisation is not yet known due to insufficient drilling in the targeted areas.”
EAL2150Joyce · phosphorusGrade: 0.5Grade Unit: %Intercept: 4 mView all detailsHide details
Identity
- Hole ID
- EAL2150
- Project
- Joyce
- Commodity
- phosphorus
- Region
- australia_wa
- Reported Region
- australia_wa
- Ticker
- ENR
Geometry
- Grade
- 0.5
- Grade Unit
- %
- Intercept
- 4 m
- From
- 63 m
- To
- 67 m
- Hole Depth
- 128 m
- Intercept Depth
- 52 m
Classification
- Deposit Type
- other
- Program
- exploration
- Sample Type
- drill
- Group ID
- EAL2150:63-67
- Mining Method
- open_pit
Location
- Easting
- 447000
- Northing
- 7541643
- CRS
- MGA94_52
- Elevation
- 398 m
- Azimuth
- 0 °
- Dip
- -60 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Laboratories
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Compositing
- Cutoff Grade
- 0.2
- Cutoff Unit
- % Nb₂O₅
- Dilution Disclosed
- Yes
- Max Dilution
- 4 m
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-10-20T00:00:00.000Z
Reasoning: A P2O5 sub-intercept, indicating phosphorus potential.
Positive factors
- P2O5 intercept
Negative factors
- True width not known
Rejected tags
Rejected tags — excluded from scoring because their label or evidence could not be verified.
QA/QC DisclosedRejected · positive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Reason: The release includes detailed QA/QC procedures such as certified laboratories, standards, blanks, and duplicates.
Evidence · text
“Standard field and laboratory QAQC was undertaken and monitored for each batch. Encounter submits an independent suite of certified reference materials and blanks at average ratio of 1:30. ALS Laboratory QAQC involves the use of internal lab standards using certified reference material and blanks as part of in-house laboratory procedures.”
Compositing TransparentRejected · positive
Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Reason: The cut-off grade of 0.2% Nb2O5 and maximum internal dilution of 4m are clearly stated for niobium intercepts, which also applies to associated P2O5.
Evidence · text
“All reported assays have been length weighted, with a nominal 0.2% Nb2O5 lower limit and a maximum of 4m of internal dilution.”
Apparent Width OnlyRejected · negative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Reason: The reported results are downhole length, and the true width geometry of the mineralization is not yet known.
Evidence · text
“Reported results are downhole length. True width geometry of the mineralisation is not yet known due to insufficient drilling in the targeted areas.”
EAL2150Joyce · phosphorusGrade: 0.4Grade Unit: %Intercept: 8 mView all detailsHide details
Identity
- Hole ID
- EAL2150
- Project
- Joyce
- Commodity
- phosphorus
- Region
- australia_wa
- Reported Region
- australia_wa
- Ticker
- ENR
Geometry
- Grade
- 0.4
- Grade Unit
- %
- Intercept
- 8 m
- From
- 77 m
- To
- 85 m
- Hole Depth
- 128 m
- Intercept Depth
- 52 m
Classification
- Deposit Type
- other
- Program
- exploration
- Sample Type
- drill
- Group ID
- EAL2150:77-85
- Mining Method
- open_pit
Location
- Easting
- 447000
- Northing
- 7541643
- CRS
- MGA94_52
- Elevation
- 398 m
- Azimuth
- 0 °
- Dip
- -60 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Laboratories
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Compositing
- Cutoff Grade
- 0.2
- Cutoff Unit
- % Nb₂O₅
- Dilution Disclosed
- Yes
- Max Dilution
- 4 m
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-10-20T00:00:00.000Z
Reasoning: A P2O5 sub-intercept, indicating phosphorus potential.
Positive factors
- P2O5 intercept
Negative factors
- True width not known
Rejected tags
Rejected tags — excluded from scoring because their label or evidence could not be verified.
QA/QC DisclosedRejected · positive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Reason: The release includes detailed QA/QC procedures such as certified laboratories, standards, blanks, and duplicates.
Evidence · text
“Standard field and laboratory QAQC was undertaken and monitored for each batch. Encounter submits an independent suite of certified reference materials and blanks at average ratio of 1:30. ALS Laboratory QAQC involves the use of internal lab standards using certified reference material and blanks as part of in-house laboratory procedures.”
Compositing TransparentRejected · positive
Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Reason: The cut-off grade of 0.2% Nb2O5 and maximum internal dilution of 4m are clearly stated for niobium intercepts, which also applies to associated P2O5.
Evidence · text
“All reported assays have been length weighted, with a nominal 0.2% Nb2O5 lower limit and a maximum of 4m of internal dilution.”
Apparent Width OnlyRejected · negative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Reason: The reported results are downhole length, and the true width geometry of the mineralization is not yet known.
Evidence · text
“Reported results are downhole length. True width geometry of the mineralisation is not yet known due to insufficient drilling in the targeted areas.”
EAL2150Joyce · phosphorusGrade: 1.1Grade Unit: %Intercept: 2 mView all detailsHide details
Identity
- Hole ID
- EAL2150
- Project
- Joyce
- Commodity
- phosphorus
- Region
- australia_wa
- Reported Region
- australia_wa
- Ticker
- ENR
Geometry
- Grade
- 1.1
- Grade Unit
- %
- Intercept
- 2 m
- From
- 99 m
- To
- 101 m
- Hole Depth
- 128 m
- Intercept Depth
- 52 m
Classification
- Deposit Type
- other
- Program
- exploration
- Sample Type
- drill
- Group ID
- EAL2150:99-101
- Mining Method
- open_pit
Location
- Easting
- 447000
- Northing
- 7541643
- CRS
- MGA94_52
- Elevation
- 398 m
- Azimuth
- 0 °
- Dip
- -60 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Laboratories
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Compositing
- Cutoff Grade
- 0.2
- Cutoff Unit
- % Nb₂O₅
- Dilution Disclosed
- Yes
- Max Dilution
- 4 m
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-10-20T00:00:00.000Z
Reasoning: A high-grade P2O5 sub-intercept, indicating significant phosphorus potential.
Positive factors
- High-grade P2O5 intercept (1.1%)
Negative factors
- True width not known
Rejected tags
Rejected tags — excluded from scoring because their label or evidence could not be verified.
QA/QC DisclosedRejected · positive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Reason: The release includes detailed QA/QC procedures such as certified laboratories, standards, blanks, and duplicates.
Evidence · text
“Standard field and laboratory QAQC was undertaken and monitored for each batch. Encounter submits an independent suite of certified reference materials and blanks at average ratio of 1:30. ALS Laboratory QAQC involves the use of internal lab standards using certified reference material and blanks as part of in-house laboratory procedures.”
Compositing TransparentRejected · positive
Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Reason: The cut-off grade of 0.2% Nb2O5 and maximum internal dilution of 4m are clearly stated for niobium intercepts, which also applies to associated P2O5.
Evidence · text
“All reported assays have been length weighted, with a nominal 0.2% Nb2O5 lower limit and a maximum of 4m of internal dilution.”
Apparent Width OnlyRejected · negative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Reason: The reported results are downhole length, and the true width geometry of the mineralization is not yet known.
Evidence · text
“Reported results are downhole length. True width geometry of the mineralisation is not yet known due to insufficient drilling in the targeted areas.”
EAL2150Joyce · phosphorusGrade: 0.9Grade Unit: %Intercept: 1 mView all detailsHide details
Identity
- Hole ID
- EAL2150
- Project
- Joyce
- Commodity
- phosphorus
- Region
- australia_wa
- Reported Region
- australia_wa
- Ticker
- ENR
Geometry
- Grade
- 0.9
- Grade Unit
- %
- Intercept
- 1 m
- From
- 120 m
- To
- 121 m
- Hole Depth
- 128 m
- Intercept Depth
- 52 m
Classification
- Deposit Type
- other
- Program
- exploration
- Sample Type
- drill
- Group ID
- EAL2150:120-121
- Mining Method
- open_pit
Location
- Easting
- 447000
- Northing
- 7541643
- CRS
- MGA94_52
- Elevation
- 398 m
- Azimuth
- 0 °
- Dip
- -60 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Laboratories
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Compositing
- Cutoff Grade
- 0.2
- Cutoff Unit
- % Nb₂O₅
- Dilution Disclosed
- Yes
- Max Dilution
- 4 m
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-10-20T00:00:00.000Z
Reasoning: A high-grade P2O5 sub-intercept, indicating significant phosphorus potential.
Positive factors
- High-grade P2O5 intercept (0.9%)
Negative factors
- True width not known
- Narrow intercept (1m)
Rejected tags
Rejected tags — excluded from scoring because their label or evidence could not be verified.
QA/QC DisclosedRejected · positive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Reason: The release includes detailed QA/QC procedures such as certified laboratories, standards, blanks, and duplicates.
Evidence · text
“Standard field and laboratory QAQC was undertaken and monitored for each batch. Encounter submits an independent suite of certified reference materials and blanks at average ratio of 1:30. ALS Laboratory QAQC involves the use of internal lab standards using certified reference material and blanks as part of in-house laboratory procedures.”
Compositing TransparentRejected · positive
Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Reason: The cut-off grade of 0.2% Nb2O5 and maximum internal dilution of 4m are clearly stated for niobium intercepts, which also applies to associated P2O5.
Evidence · text
“All reported assays have been length weighted, with a nominal 0.2% Nb2O5 lower limit and a maximum of 4m of internal dilution.”
Apparent Width OnlyRejected · negative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Reason: The reported results are downhole length, and the true width geometry of the mineralization is not yet known.
Evidence · text
“Reported results are downhole length. True width geometry of the mineralisation is not yet known due to insufficient drilling in the targeted areas.”
EAL2150Joyce · phosphorusGrade: 0.8Grade Unit: %Intercept: 1 mView all detailsHide details
Identity
- Hole ID
- EAL2150
- Project
- Joyce
- Commodity
- phosphorus
- Region
- australia_wa
- Reported Region
- australia_wa
- Ticker
- ENR
Geometry
- Grade
- 0.8
- Grade Unit
- %
- Intercept
- 1 m
- From
- 123 m
- To
- 124 m
- Hole Depth
- 128 m
- Intercept Depth
- 52 m
Classification
- Deposit Type
- other
- Program
- exploration
- Sample Type
- drill
- Group ID
- EAL2150:123-124
- Mining Method
- open_pit
Location
- Easting
- 447000
- Northing
- 7541643
- CRS
- MGA94_52
- Elevation
- 398 m
- Azimuth
- 0 °
- Dip
- -60 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Laboratories
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Compositing
- Cutoff Grade
- 0.2
- Cutoff Unit
- % Nb₂O₅
- Dilution Disclosed
- Yes
- Max Dilution
- 4 m
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-10-20T00:00:00.000Z
Reasoning: A high-grade P2O5 sub-intercept, indicating significant phosphorus potential.
Positive factors
- High-grade P2O5 intercept (0.8%)
Negative factors
- True width not known
- Narrow intercept (1m)
Rejected tags
Rejected tags — excluded from scoring because their label or evidence could not be verified.
QA/QC DisclosedRejected · positive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Reason: The release includes detailed QA/QC procedures such as certified laboratories, standards, blanks, and duplicates.
Evidence · text
“Standard field and laboratory QAQC was undertaken and monitored for each batch. Encounter submits an independent suite of certified reference materials and blanks at average ratio of 1:30. ALS Laboratory QAQC involves the use of internal lab standards using certified reference material and blanks as part of in-house laboratory procedures.”
Compositing TransparentRejected · positive
Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Reason: The cut-off grade of 0.2% Nb2O5 and maximum internal dilution of 4m are clearly stated for niobium intercepts, which also applies to associated P2O5.
Evidence · text
“All reported assays have been length weighted, with a nominal 0.2% Nb2O5 lower limit and a maximum of 4m of internal dilution.”
Apparent Width OnlyRejected · negative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Reason: The reported results are downhole length, and the true width geometry of the mineralization is not yet known.
Evidence · text
“Reported results are downhole length. True width geometry of the mineralisation is not yet known due to insufficient drilling in the targeted areas.”
EAL1687Joyce · niobiumGrade: 0.18Grade Unit: %Intercept: 8 mView all detailsHide details
Identity
- Hole ID
- EAL1687
- Project
- Joyce
- Commodity
- niobium
- Region
- australia_wa
- Reported Region
- australia_wa
- Ticker
- ENR
Geometry
- Grade
- 0.18
- Grade Unit
- %
- Intercept
- 8 m
- From
- 41 m
- To
- 49 m
- Hole Depth
- 87 m
- Intercept Depth
- 41 m
Classification
- Deposit Type
- other
- Program
- exploration
- Sample Type
- drill
- Group ID
- EAL1687:41-49
- Mining Method
- open_pit
Location
- Easting
- 446798
- Northing
- 7540997
- CRS
- MGA94_52
- Elevation
- 398 m
- Azimuth
- 0 °
- Dip
- -60 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Laboratories
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Compositing
- Cutoff Grade
- 0.2
- Cutoff Unit
- % Nb₂O₅
- Dilution Disclosed
- Yes
- Max Dilution
- 4 m
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-10-20T00:00:00.000Z
Reasoning: A weak niobium intercept, below the stated cut-off, but still indicating the presence of mineralization.
Positive factors
- Intercept indicates presence of niobium
Negative factors
- Grade is below cut-off (0.18% vs 0.2%)
- True width not known
Rejected tags
Rejected tags — excluded from scoring because their label or evidence could not be verified.
QA/QC DisclosedRejected · positive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Reason: The release includes detailed QA/QC procedures such as certified laboratories, standards, blanks, and duplicates.
Evidence · text
“Standard field and laboratory QAQC was undertaken and monitored for each batch. Encounter submits an independent suite of certified reference materials and blanks at average ratio of 1:30. ALS Laboratory QAQC involves the use of internal lab standards using certified reference material and blanks as part of in-house laboratory procedures.”
Compositing TransparentRejected · positive
Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Reason: The cut-off grade of 0.2% Nb2O5 and maximum internal dilution of 4m are clearly stated for niobium intercepts.
Evidence · text
“All reported assays have been length weighted, with a nominal 0.2% Nb2O5 lower limit and a maximum of 4m of internal dilution.”
Apparent Width OnlyRejected · negative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Reason: The reported results are downhole length, and the true width geometry of the mineralization is not yet known.
Evidence · text
“Reported results are downhole length. True width geometry of the mineralisation is not yet known due to insufficient drilling in the targeted areas.”
EAL1687Joyce · rare earth elementsGrade: 0.24Grade Unit: %Intercept: 8 mView all detailsHide details
Identity
- Hole ID
- EAL1687
- Project
- Joyce
- Commodity
- rare earth elements
- Region
- australia_wa
- Reported Region
- australia_wa
- Ticker
- ENR
Geometry
- Grade
- 0.24
- Grade Unit
- %
- Intercept
- 8 m
- From
- 41 m
- To
- 49 m
- Hole Depth
- 87 m
- Intercept Depth
- 41 m
Classification
- Deposit Type
- other
- Program
- exploration
- Sample Type
- drill
- Group ID
- EAL1687:41-49
- Mining Method
- open_pit
Location
- Easting
- 446798
- Northing
- 7540997
- CRS
- MGA94_52
- Elevation
- 398 m
- Azimuth
- 0 °
- Dip
- -60 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Laboratories
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Compositing
- Cutoff Grade
- 0.2
- Cutoff Unit
- % Nb₂O₅
- Dilution Disclosed
- Yes
- Max Dilution
- 4 m
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-10-20T00:00:00.000Z
Reasoning: A TREO intercept, indicating rare earth element potential.
Positive factors
- TREO intercept
- REE are critical minerals
Negative factors
- True width not known
Rejected tags
Rejected tags — excluded from scoring because their label or evidence could not be verified.
QA/QC DisclosedRejected · positive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Reason: The release includes detailed QA/QC procedures such as certified laboratories, standards, blanks, and duplicates.
Evidence · text
“Standard field and laboratory QAQC was undertaken and monitored for each batch. Encounter submits an independent suite of certified reference materials and blanks at average ratio of 1:30. ALS Laboratory QAQC involves the use of internal lab standards using certified reference material and blanks as part of in-house laboratory procedures.”
Compositing TransparentRejected · positive
Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Reason: The cut-off grade of 0.2% Nb2O5 and maximum internal dilution of 4m are clearly stated for niobium intercepts, which also applies to associated REE.
Evidence · text
“All reported assays have been length weighted, with a nominal 0.2% Nb2O5 lower limit and a maximum of 4m of internal dilution.”
Apparent Width OnlyRejected · negative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Reason: The reported results are downhole length, and the true width geometry of the mineralization is not yet known.
Evidence · text
“Reported results are downhole length. True width geometry of the mineralisation is not yet known due to insufficient drilling in the targeted areas.”
EAL1687Joyce · rare earth elementsGrade: 633Grade Unit: ppm Nd2O3+Pr2O3Intercept: 8 mView all detailsHide details
Identity
- Hole ID
- EAL1687
- Project
- Joyce
- Commodity
- rare earth elements
- Region
- australia_wa
- Reported Region
- australia_wa
- Ticker
- ENR
Geometry
- Grade
- 633
- Grade Unit
- ppm Nd2O3+Pr2O3
- Intercept
- 8 m
- From
- 41 m
- To
- 49 m
- Hole Depth
- 87 m
- Intercept Depth
- 41 m
Classification
- Deposit Type
- other
- Program
- exploration
- Sample Type
- drill
- Group ID
- EAL1687:41-49
- Mining Method
- open_pit
Location
- Easting
- 446798
- Northing
- 7540997
- CRS
- MGA94_52
- Elevation
- 398 m
- Azimuth
- 0 °
- Dip
- -60 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Laboratories
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Compositing
- Cutoff Grade
- 0.2
- Cutoff Unit
- % Nb₂O₅
- Dilution Disclosed
- Yes
- Max Dilution
- 4 m
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-10-20T00:00:00.000Z
Reasoning: An intercept with Nd2O3+Pr2O3 grades, indicating rare earth element potential.
Positive factors
- Nd2O3+Pr2O3 intercept
- REE are critical minerals
Negative factors
- True width not known
Rejected tags
Rejected tags — excluded from scoring because their label or evidence could not be verified.
QA/QC DisclosedRejected · positive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Reason: The release includes detailed QA/QC procedures such as certified laboratories, standards, blanks, and duplicates.
Evidence · text
“Standard field and laboratory QAQC was undertaken and monitored for each batch. Encounter submits an independent suite of certified reference materials and blanks at average ratio of 1:30. ALS Laboratory QAQC involves the use of internal lab standards using certified reference material and blanks as part of in-house laboratory procedures.”
Compositing TransparentRejected · positive
Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Reason: The cut-off grade of 0.2% Nb2O5 and maximum internal dilution of 4m are clearly stated for niobium intercepts, which also applies to associated REE.
Evidence · text
“All reported assays have been length weighted, with a nominal 0.2% Nb2O5 lower limit and a maximum of 4m of internal dilution.”
Apparent Width OnlyRejected · negative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Reason: The reported results are downhole length, and the true width geometry of the mineralization is not yet known.
Evidence · text
“Reported results are downhole length. True width geometry of the mineralisation is not yet known due to insufficient drilling in the targeted areas.”
EAL1687Joyce · rare earth elementsGrade: 58Grade Unit: ppm Tb2O3+Dy2O3Intercept: 8 mView all detailsHide details
Identity
- Hole ID
- EAL1687
- Project
- Joyce
- Commodity
- rare earth elements
- Region
- australia_wa
- Reported Region
- australia_wa
- Ticker
- ENR
Geometry
- Grade
- 58
- Grade Unit
- ppm Tb2O3+Dy2O3
- Intercept
- 8 m
- From
- 41 m
- To
- 49 m
- Hole Depth
- 87 m
- Intercept Depth
- 41 m
Classification
- Deposit Type
- other
- Program
- exploration
- Sample Type
- drill
- Group ID
- EAL1687:41-49
- Mining Method
- open_pit
Location
- Easting
- 446798
- Northing
- 7540997
- CRS
- MGA94_52
- Elevation
- 398 m
- Azimuth
- 0 °
- Dip
- -60 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Laboratories
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Compositing
- Cutoff Grade
- 0.2
- Cutoff Unit
- % Nb₂O₅
- Dilution Disclosed
- Yes
- Max Dilution
- 4 m
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-10-20T00:00:00.000Z
Reasoning: An intercept with Tb2O3+Dy2O3 grades, indicating rare earth element potential.
Positive factors
- Tb2O3+Dy2O3 intercept
- REE are critical minerals
Negative factors
- True width not known
Rejected tags
Rejected tags — excluded from scoring because their label or evidence could not be verified.
QA/QC DisclosedRejected · positive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Reason: The release includes detailed QA/QC procedures such as certified laboratories, standards, blanks, and duplicates.
Evidence · text
“Standard field and laboratory QAQC was undertaken and monitored for each batch. Encounter submits an independent suite of certified reference materials and blanks at average ratio of 1:30. ALS Laboratory QAQC involves the use of internal lab standards using certified reference material and blanks as part of in-house laboratory procedures.”
Compositing TransparentRejected · positive
Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Reason: The cut-off grade of 0.2% Nb2O5 and maximum internal dilution of 4m are clearly stated for niobium intercepts, which also applies to associated REE.
Evidence · text
“All reported assays have been length weighted, with a nominal 0.2% Nb2O5 lower limit and a maximum of 4m of internal dilution.”
Apparent Width OnlyRejected · negative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Reason: The reported results are downhole length, and the true width geometry of the mineralization is not yet known.
Evidence · text
“Reported results are downhole length. True width geometry of the mineralisation is not yet known due to insufficient drilling in the targeted areas.”
EAL1687Joyce · phosphorusGrade: 0.2Grade Unit: %Intercept: 8 mView all detailsHide details
Identity
- Hole ID
- EAL1687
- Project
- Joyce
- Commodity
- phosphorus
- Region
- australia_wa
- Reported Region
- australia_wa
- Ticker
- ENR
Geometry
- Grade
- 0.2
- Grade Unit
- %
- Intercept
- 8 m
- From
- 41 m
- To
- 49 m
- Hole Depth
- 87 m
- Intercept Depth
- 41 m
Classification
- Deposit Type
- other
- Program
- exploration
- Sample Type
- drill
- Group ID
- EAL1687:41-49
- Mining Method
- open_pit
Location
- Easting
- 446798
- Northing
- 7540997
- CRS
- MGA94_52
- Elevation
- 398 m
- Azimuth
- 0 °
- Dip
- -60 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Laboratories
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Compositing
- Cutoff Grade
- 0.2
- Cutoff Unit
- % Nb₂O₅
- Dilution Disclosed
- Yes
- Max Dilution
- 4 m
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-10-20T00:00:00.000Z
Reasoning: A P2O5 intercept, indicating phosphorus potential.
Positive factors
- P2O5 intercept
- Phosphorus is a critical mineral
Negative factors
- True width not known
Rejected tags
Rejected tags — excluded from scoring because their label or evidence could not be verified.
QA/QC DisclosedRejected · positive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Reason: The release includes detailed QA/QC procedures such as certified laboratories, standards, blanks, and duplicates.
Evidence · text
“Standard field and laboratory QAQC was undertaken and monitored for each batch. Encounter submits an independent suite of certified reference materials and blanks at average ratio of 1:30. ALS Laboratory QAQC involves the use of internal lab standards using certified reference material and blanks as part of in-house laboratory procedures.”
Compositing TransparentRejected · positive
Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Reason: The cut-off grade of 0.2% Nb2O5 and maximum internal dilution of 4m are clearly stated for niobium intercepts, which also applies to associated P2O5.
Evidence · text
“All reported assays have been length weighted, with a nominal 0.2% Nb2O5 lower limit and a maximum of 4m of internal dilution.”
Apparent Width OnlyRejected · negative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Reason: The reported results are downhole length, and the true width geometry of the mineralization is not yet known.
Evidence · text
“Reported results are downhole length. True width geometry of the mineralisation is not yet known due to insufficient drilling in the targeted areas.”
EAL2136Joyce · niobiumGrade: 0.35Grade Unit: %Intercept: 3 mView all detailsHide details
Identity
- Hole ID
- EAL2136
- Project
- Joyce
- Commodity
- niobium
- Region
- australia_wa
- Reported Region
- australia_wa
- Ticker
- ENR
Geometry
- Grade
- 0.35
- Grade Unit
- %
- Intercept
- 3 m
- From
- 54 m
- To
- 57 m
- Hole Depth
- 132 m
- Intercept Depth
- 54 m
Classification
- Deposit Type
- other
- Program
- exploration
- Sample Type
- drill
- Group ID
- EAL2136:54-57
- Mining Method
- open_pit
Location
- Easting
- 447401
- Northing
- 7541512
- CRS
- MGA94_52
- Elevation
- 395 m
- Azimuth
- 0 °
- Dip
- -60 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Laboratories
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Compositing
- Cutoff Grade
- 0.2
- Cutoff Unit
- % Nb₂O₅
- Dilution Disclosed
- Yes
- Max Dilution
- 4 m
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-10-20T00:00:00.000Z
Reasoning: A moderate-grade niobium intercept, contributing to the overall understanding of the zone.
Positive factors
- Moderate-grade intercept (0.35% Nb₂O₅ is moderate for carbonatite)
Negative factors
- True width not known
Rejected tags
Rejected tags — excluded from scoring because their label or evidence could not be verified.
QA/QC DisclosedRejected · positive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Reason: The release includes detailed QA/QC procedures such as certified laboratories, standards, blanks, and duplicates.
Evidence · text
“Standard field and laboratory QAQC was undertaken and monitored for each batch. Encounter submits an independent suite of certified reference materials and blanks at average ratio of 1:30. ALS Laboratory QAQC involves the use of internal lab standards using certified reference material and blanks as part of in-house laboratory procedures.”
Compositing TransparentRejected · positive
Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Reason: The cut-off grade of 0.2% Nb2O5 and maximum internal dilution of 4m are clearly stated for niobium intercepts.
Evidence · text
“All reported assays have been length weighted, with a nominal 0.2% Nb2O5 lower limit and a maximum of 4m of internal dilution.”
Apparent Width OnlyRejected · negative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Reason: The reported results are downhole length, and the true width geometry of the mineralization is not yet known.
Evidence · text
“Reported results are downhole length. True width geometry of the mineralisation is not yet known due to insufficient drilling in the targeted areas.”
EAL2136Joyce · rare earth elementsGrade: 0.16Grade Unit: %Intercept: 3 mView all detailsHide details
Identity
- Hole ID
- EAL2136
- Project
- Joyce
- Commodity
- rare earth elements
- Region
- australia_wa
- Reported Region
- australia_wa
- Ticker
- ENR
Geometry
- Grade
- 0.16
- Grade Unit
- %
- Intercept
- 3 m
- From
- 54 m
- To
- 57 m
- Hole Depth
- 132 m
- Intercept Depth
- 54 m
Classification
- Deposit Type
- other
- Program
- exploration
- Sample Type
- drill
- Group ID
- EAL2136:54-57
- Mining Method
- open_pit
Location
- Easting
- 447401
- Northing
- 7541512
- CRS
- MGA94_52
- Elevation
- 395 m
- Azimuth
- 0 °
- Dip
- -60 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Laboratories
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Compositing
- Cutoff Grade
- 0.2
- Cutoff Unit
- % Nb₂O₅
- Dilution Disclosed
- Yes
- Max Dilution
- 4 m
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-10-20T00:00:00.000Z
Reasoning: A TREO intercept, indicating rare earth element potential.
Positive factors
- TREO intercept
- REE are critical minerals
Negative factors
- True width not known
Rejected tags
Rejected tags — excluded from scoring because their label or evidence could not be verified.
QA/QC DisclosedRejected · positive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Reason: The release includes detailed QA/QC procedures such as certified laboratories, standards, blanks, and duplicates.
Evidence · text
“Standard field and laboratory QAQC was undertaken and monitored for each batch. Encounter submits an independent suite of certified reference materials and blanks at average ratio of 1:30. ALS Laboratory QAQC involves the use of internal lab standards using certified reference material and blanks as part of in-house laboratory procedures.”
Compositing TransparentRejected · positive
Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Reason: The cut-off grade of 0.2% Nb2O5 and maximum internal dilution of 4m are clearly stated for niobium intercepts, which also applies to associated REE.
Evidence · text
“All reported assays have been length weighted, with a nominal 0.2% Nb2O5 lower limit and a maximum of 4m of internal dilution.”
Apparent Width OnlyRejected · negative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Reason: The reported results are downhole length, and the true width geometry of the mineralization is not yet known.
Evidence · text
“Reported results are downhole length. True width geometry of the mineralisation is not yet known due to insufficient drilling in the targeted areas.”
EAL2136Joyce · rare earth elementsGrade: 307Grade Unit: ppm Nd2O3+Pr2O3Intercept: 3 mView all detailsHide details
Identity
- Hole ID
- EAL2136
- Project
- Joyce
- Commodity
- rare earth elements
- Region
- australia_wa
- Reported Region
- australia_wa
- Ticker
- ENR
Geometry
- Grade
- 307
- Grade Unit
- ppm Nd2O3+Pr2O3
- Intercept
- 3 m
- From
- 54 m
- To
- 57 m
- Hole Depth
- 132 m
- Intercept Depth
- 54 m
Classification
- Deposit Type
- other
- Program
- exploration
- Sample Type
- drill
- Group ID
- EAL2136:54-57
- Mining Method
- open_pit
Location
- Easting
- 447401
- Northing
- 7541512
- CRS
- MGA94_52
- Elevation
- 395 m
- Azimuth
- 0 °
- Dip
- -60 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Laboratories
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Compositing
- Cutoff Grade
- 0.2
- Cutoff Unit
- % Nb₂O₅
- Dilution Disclosed
- Yes
- Max Dilution
- 4 m
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-10-20T00:00:00.000Z
Reasoning: An intercept with Nd2O3+Pr2O3 grades, indicating rare earth element potential.
Positive factors
- Nd2O3+Pr2O3 intercept
- REE are critical minerals
Negative factors
- True width not known
Rejected tags
Rejected tags — excluded from scoring because their label or evidence could not be verified.
QA/QC DisclosedRejected · positive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Reason: The release includes detailed QA/QC procedures such as certified laboratories, standards, blanks, and duplicates.
Evidence · text
“Standard field and laboratory QAQC was undertaken and monitored for each batch. Encounter submits an independent suite of certified reference materials and blanks at average ratio of 1:30. ALS Laboratory QAQC involves the use of internal lab standards using certified reference material and blanks as part of in-house laboratory procedures.”
Compositing TransparentRejected · positive
Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Reason: The cut-off grade of 0.2% Nb2O5 and maximum internal dilution of 4m are clearly stated for niobium intercepts, which also applies to associated REE.
Evidence · text
“All reported assays have been length weighted, with a nominal 0.2% Nb2O5 lower limit and a maximum of 4m of internal dilution.”
Apparent Width OnlyRejected · negative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Reason: The reported results are downhole length, and the true width geometry of the mineralization is not yet known.
Evidence · text
“Reported results are downhole length. True width geometry of the mineralisation is not yet known due to insufficient drilling in the targeted areas.”
EAL2136Joyce · rare earth elementsGrade: 19Grade Unit: ppm Tb2O3+Dy2O3Intercept: 3 mView all detailsHide details
Identity
- Hole ID
- EAL2136
- Project
- Joyce
- Commodity
- rare earth elements
- Region
- australia_wa
- Reported Region
- australia_wa
- Ticker
- ENR
Geometry
- Grade
- 19
- Grade Unit
- ppm Tb2O3+Dy2O3
- Intercept
- 3 m
- From
- 54 m
- To
- 57 m
- Hole Depth
- 132 m
- Intercept Depth
- 54 m
Classification
- Deposit Type
- other
- Program
- exploration
- Sample Type
- drill
- Group ID
- EAL2136:54-57
- Mining Method
- open_pit
Location
- Easting
- 447401
- Northing
- 7541512
- CRS
- MGA94_52
- Elevation
- 395 m
- Azimuth
- 0 °
- Dip
- -60 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Laboratories
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Compositing
- Cutoff Grade
- 0.2
- Cutoff Unit
- % Nb₂O₅
- Dilution Disclosed
- Yes
- Max Dilution
- 4 m
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-10-20T00:00:00.000Z
Reasoning: An intercept with Tb2O3+Dy2O3 grades, indicating rare earth element potential.
Positive factors
- Tb2O3+Dy2O3 intercept
- REE are critical minerals
Negative factors
- True width not known
Rejected tags
Rejected tags — excluded from scoring because their label or evidence could not be verified.
QA/QC DisclosedRejected · positive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Reason: The release includes detailed QA/QC procedures such as certified laboratories, standards, blanks, and duplicates.
Evidence · text
“Standard field and laboratory QAQC was undertaken and monitored for each batch. Encounter submits an independent suite of certified reference materials and blanks at average ratio of 1:30. ALS Laboratory QAQC involves the use of internal lab standards using certified reference material and blanks as part of in-house laboratory procedures.”
Compositing TransparentRejected · positive
Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Reason: The cut-off grade of 0.2% Nb2O5 and maximum internal dilution of 4m are clearly stated for niobium intercepts, which also applies to associated REE.
Evidence · text
“All reported assays have been length weighted, with a nominal 0.2% Nb2O5 lower limit and a maximum of 4m of internal dilution.”
Apparent Width OnlyRejected · negative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Reason: The reported results are downhole length, and the true width geometry of the mineralization is not yet known.
Evidence · text
“Reported results are downhole length. True width geometry of the mineralisation is not yet known due to insufficient drilling in the targeted areas.”
EAL2136Joyce · phosphorusGrade: 0.6Grade Unit: %Intercept: 3 mView all detailsHide details
Identity
- Hole ID
- EAL2136
- Project
- Joyce
- Commodity
- phosphorus
- Region
- australia_wa
- Reported Region
- australia_wa
- Ticker
- ENR
Geometry
- Grade
- 0.6
- Grade Unit
- %
- Intercept
- 3 m
- From
- 54 m
- To
- 57 m
- Hole Depth
- 132 m
- Intercept Depth
- 54 m
Classification
- Deposit Type
- other
- Program
- exploration
- Sample Type
- drill
- Group ID
- EAL2136:54-57
- Mining Method
- open_pit
Location
- Easting
- 447401
- Northing
- 7541512
- CRS
- MGA94_52
- Elevation
- 395 m
- Azimuth
- 0 °
- Dip
- -60 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Laboratories
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Compositing
- Cutoff Grade
- 0.2
- Cutoff Unit
- % Nb₂O₅
- Dilution Disclosed
- Yes
- Max Dilution
- 4 m
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-10-20T00:00:00.000Z
Positive factors
- P2O5 intercept
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Compositing Transparentpositive
Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Why it applies: cutoff_grade and internal dilution are both stated
How Atlas produces this analysis
Minestarters Atlas uses automated extraction to summarize mining announcements, identify reported measurements, and classify supporting evidence. Sentiment reflects the extracted narrative and classification rules; it is an interpretation, not a reported measurement. Evidence quotes and context are provided where available. Missing data, low-confidence results, and review flags indicate limitations. Check the original publisher announcement before relying on an interpretation.