Emperor Reports Additional Drill Results and Continues to Strengthen Conceptual Phase 1 Open-Pit
Original announcement by prospectors_exchange on
- Company
- Emperor Metals Inc.
- Ticker
- AUOZ
- Exchange
- Unavailable
- Region
- Quebec
- Primary commodity
- Gold
- Secondary commodities
- None reported
- Document categories
- Drill results, Other, Resource update
- Extracted
- 2026-10-21 11:51:24 UTC
Analysis by Minestarters Atlas
Atlas analysis published:
Minestarters Atlas analysis
Summary
Emperor Metals reported final assay results from seven new drillholes at its Duquesne West Project, confirming near-surface gold mineralization with moderate to strong grades. These results, including high-grade sub-intervals, strengthen the conceptual Phase 1 open-pit concept and support the company's objective of advancing towards a Preliminary Economic Assessment and an updated Mineral Resource Estimate. The program integrates new drilling with historical core resampling, adding significant data to refine the resource model.
Reasoning: The drill results confirm near-surface gold mineralization with moderate to strong grades, supporting the company's conceptual open-pit development strategy and advancing the project towards a PEA and MRE update. While some grades are lower than historical highs, the overall program is positive for project de-risking and future economic studies.
Positive factors
- Near-surface gold intercepts support conceptual open-pit development.
- Several intercepts show strong to exceptional gold grades for an open-pit target.
- Drilling confirms continuity and thickness of mineralization.
- Comprehensive QA/QC procedures are disclosed, including certified laboratories and QP sign-off.
- Results are explicitly advancing the project towards a Preliminary Economic Assessment (PEA) and an updated Mineral Resource Estimate (MRE).
Negative factors
- True thickness is estimated as a range (70-90%) rather than a precise value.
- Some reported intercepts have lower grades compared to historical project averages.
- Cut-off grades used for compositing intervals are not disclosed.
Facts used in scoring: 42
Classification and evidence
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: The release details QA/QC procedures including certified reference material, blanks, lab duplicates, and mentions certified laboratories (MSALabs ISO/IEC 17025 accredited) and QP sign-off.
Evidence · text
“The Quality Assurance and Quality Control (QA/QC) was conducted by Technominex, a geological contractor hired by Emperor Metals, which adheres to CIM Best Practices Guidelines for exploration related activities conducted at its facility in Rouyn Noranda, Quebec. The QA/QC procedures are overseen by a Qualified Person on site. Emperor Metals QA/QC protocols are maintained through the insertion of certified reference material (standards), blanks and lab duplicates within the sample stream totaling approximately one QA/QC sample per 7 samples. Drill core is cut in-half with a diamond saw, with one-half placed in sealed bags with appropriate tags and shipped to either the SGS Val D’Or, Quebec or MSALabs in Val D’Or, Quebec and the other half retained on site in the original core box. ... MSALabs is an ISO/IEC 17025 accredited laboratory and implements rigorous internal quality control procedures.”
Apparent Width Onlynegative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Why it applies: The document states 'Estimated 70-90% True Thickness' and 'Estimated 70-75% True Thickness' but does not provide a single true width value for any intercept.
Evidence · text
“Estimated 70-90% True Thickness”
Step-Out Extensionpositive
Mineralization extended beyond the previously known limit.
Why it applies: The company aims to 'expand mineralization, targeting additional ounces both within the current resource footprint and through step-out and expansion drilling'.
Evidence · text
“Use the results to define and expand mineralization, targeting additional ounces both within the current resource footprint and through step-out and expansion drilling.”
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: The company plans to 'Design a conceptual grade-control drilling program within a proposed conceptual Phase 1 open pit to better define near-surface mineralization and provide data that could support an updated MRE and PEA'.
Evidence · text
“Design a conceptual grade-control drilling program within a proposed conceptual Phase 1 open pit to better define near-surface mineralization and provide data that could support an updated MRE and PEA.”
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: The release reports drill intervals and grades but does not state the cut-off grade used for compositing.
Evidence · text
“Hole No. From (m) To (m) Interval (m) Au (g/t Au)”
Bonanza Interceptpositive
Exceptionally high-grade zone, well above the deposit-type norm.
Why it applies: The intercept DQ26-51 from 63.8m to 64.9m returned 1.1m at 7.1 g/t Au, which is an exceptional grade for an open-pit gold target.
Evidence · table
“7.1”
Context: 1.1
Extracted facts
Stored fact records: 42. Some facts used in scoring do not have a stored record.
Drill Results (42)
DQ26-51Duquesne West · goldGrade: 0.4Grade Unit: g/tIntercept: 1.8 mView all detailsHide details
Identity
- Hole ID
- DQ26-51
- Project
- Duquesne West
- Commodity
- gold
- Region
- canada_qc
- Reported Region
- canada_qc
- Ticker
- AUOZ
Geometry
- Grade
- 0.4
- Grade Unit
- g/t
- Intercept
- 1.8 m
- From
- 42.5 m
- To
- 44.3 m
- Hole Depth
- 97 m
- Intercept Depth
- 42.5 m
Classification
- Deposit Type
- orogenic
- Program
- exploration
- Sample Type
- drill
- Group ID
- DQ26-51:42.5-44.3
- Mining Method
- open_pit
Location
- Loc. Confidence
- medium
QA/QC
- Laboratory
- SGS Val D'Or, Quebec and MSALabs in Val D'Or, Quebec and SGS Burnaby, British Columbia
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-10-20T00:00:00.000Z
Reasoning: This is a low-grade, near-surface intercept from new drilling, contributing to the overall understanding of the open-pit potential, with good QA/QC disclosure.
Positive factors
- Near-surface intercept supporting open-pit potential.
- QA/QC procedures disclosed and certified labs used.
Negative factors
- Low grade for gold.
- True thickness is estimated as a range, not a single value.
- Cut-off grade for compositing is not disclosed.
Evidence · table
“0.4”
Context: 1.8
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
DQ26-51Duquesne West · goldGrade: 0.2Grade Unit: g/tIntercept: 2.5 mView all detailsHide details
Identity
- Hole ID
- DQ26-51
- Project
- Duquesne West
- Commodity
- gold
- Region
- canada_qc
- Reported Region
- canada_qc
- Ticker
- AUOZ
Geometry
- Grade
- 0.2
- Grade Unit
- g/t
- Intercept
- 2.5 m
- From
- 44.3 m
- To
- 46.8 m
- Hole Depth
- 97 m
- Intercept Depth
- 42.5 m
Classification
- Deposit Type
- orogenic
- Program
- exploration
- Sample Type
- drill
- Group ID
- DQ26-51:44.3-46.8
- Mining Method
- open_pit
Location
- Loc. Confidence
- medium
QA/QC
- Laboratory
- SGS Val D'Or, Quebec and MSALabs in Val D'Or, Quebec and SGS Burnaby, British Columbia
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-10-20T00:00:00.000Z
Reasoning: This is a very low-grade, near-surface intercept from new drilling, contributing to the overall understanding of the open-pit potential, with good QA/QC disclosure.
Positive factors
- Near-surface intercept supporting open-pit potential.
- QA/QC procedures disclosed and certified labs used.
Negative factors
- Very low grade for gold.
- True thickness is estimated as a range, not a single value.
- Cut-off grade for compositing is not disclosed.
Evidence · table
“0.2”
Context: 2.5
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
DQ26-51Duquesne West · goldGrade: 3.9Grade Unit: g/tIntercept: 1 mView all detailsHide details
Identity
- Hole ID
- DQ26-51
- Project
- Duquesne West
- Commodity
- gold
- Region
- canada_qc
- Reported Region
- canada_qc
- Ticker
- AUOZ
Geometry
- Grade
- 3.9
- Grade Unit
- g/t
- Intercept
- 1 m
- From
- 46.8 m
- To
- 47.8 m
- Hole Depth
- 97 m
- Intercept Depth
- 42.5 m
Classification
- Deposit Type
- orogenic
- Program
- exploration
- Sample Type
- drill
- Group ID
- DQ26-51:46.8-47.8
- Mining Method
- open_pit
Location
- Loc. Confidence
- medium
QA/QC
- Laboratory
- SGS Val D'Or, Quebec and MSALabs in Val D'Or, Quebec and SGS Burnaby, British Columbia
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-10-20T00:00:00.000Z
Reasoning: This is a strong-grade, near-surface intercept from new drilling, contributing positively to the open-pit potential, with good QA/QC disclosure.
Positive factors
- Strong gold grade for an open-pit target.
- Near-surface intercept supporting open-pit potential.
- QA/QC procedures disclosed and certified labs used.
Negative factors
- Narrow intercept length.
- True thickness is estimated as a range, not a single value.
- Cut-off grade for compositing is not disclosed.
Evidence · table
“3.9”
Context: 1.0
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
DQ26-51Duquesne West · goldGrade: 4.6Grade Unit: g/tIntercept: 1 mView all detailsHide details
Identity
- Hole ID
- DQ26-51
- Project
- Duquesne West
- Commodity
- gold
- Region
- canada_qc
- Reported Region
- canada_qc
- Ticker
- AUOZ
Geometry
- Grade
- 4.6
- Grade Unit
- g/t
- Intercept
- 1 m
- From
- 47.8 m
- To
- 48.8 m
- Hole Depth
- 97 m
- Intercept Depth
- 42.5 m
Classification
- Deposit Type
- orogenic
- Program
- exploration
- Sample Type
- drill
- Group ID
- DQ26-51:47.8-48.8
- Mining Method
- open_pit
Location
- Loc. Confidence
- medium
QA/QC
- Laboratory
- SGS Val D'Or, Quebec and MSALabs in Val D'Or, Quebec and SGS Burnaby, British Columbia
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-10-20T00:00:00.000Z
Reasoning: This is a strong-grade, near-surface intercept from new drilling, contributing positively to the open-pit potential, with good QA/QC disclosure.
Positive factors
- Strong gold grade for an open-pit target.
- Near-surface intercept supporting open-pit potential.
- QA/QC procedures disclosed and certified labs used.
Negative factors
- Narrow intercept length.
- True thickness is estimated as a range, not a single value.
- Cut-off grade for compositing is not disclosed.
Evidence · table
“4.6”
Context: 1.0
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
DQ26-51Duquesne West · goldGrade: 0.1Grade Unit: g/tIntercept: 2 mView all detailsHide details
Identity
- Hole ID
- DQ26-51
- Project
- Duquesne West
- Commodity
- gold
- Region
- canada_qc
- Reported Region
- canada_qc
- Ticker
- AUOZ
Geometry
- Grade
- 0.1
- Grade Unit
- g/t
- Intercept
- 2 m
- From
- 48.8 m
- To
- 50.8 m
- Hole Depth
- 97 m
- Intercept Depth
- 42.5 m
Classification
- Deposit Type
- orogenic
- Program
- exploration
- Sample Type
- drill
- Group ID
- DQ26-51:48.8-50.8
- Mining Method
- open_pit
Location
- Loc. Confidence
- medium
QA/QC
- Laboratory
- SGS Val D'Or, Quebec and MSALabs in Val D'Or, Quebec and SGS Burnaby, British Columbia
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-10-20T00:00:00.000Z
Reasoning: This is a very low-grade, near-surface intercept from new drilling, contributing to the overall understanding of the open-pit potential, with good QA/QC disclosure.
Positive factors
- Near-surface intercept supporting open-pit potential.
- QA/QC procedures disclosed and certified labs used.
Negative factors
- Very low grade for gold.
- True thickness is estimated as a range, not a single value.
- Cut-off grade for compositing is not disclosed.
Evidence · table
“0.1”
Context: 2.0
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
DQ26-51Duquesne West · goldGrade: 0Grade Unit: g/tIntercept: 1 mView all detailsHide details
Identity
- Hole ID
- DQ26-51
- Project
- Duquesne West
- Commodity
- gold
- Region
- canada_qc
- Reported Region
- canada_qc
- Ticker
- AUOZ
Geometry
- Grade
- 0
- Grade Unit
- g/t
- Intercept
- 1 m
- From
- 50.8 m
- To
- 51.8 m
- Hole Depth
- 97 m
- Intercept Depth
- 42.5 m
Classification
- Deposit Type
- orogenic
- Program
- exploration
- Sample Type
- drill
- Group ID
- DQ26-51:50.8-51.8
- Mining Method
- open_pit
Location
- Loc. Confidence
- medium
QA/QC
- Laboratory
- SGS Val D'Or, Quebec and MSALabs in Val D'Or, Quebec and SGS Burnaby, British Columbia
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-10-20T00:00:00.000Z
Reasoning: This is a barren, near-surface intercept from new drilling, contributing to the overall understanding of the open-pit potential, with good QA/QC disclosure.
Positive factors
- Near-surface intercept supporting open-pit potential.
- QA/QC procedures disclosed and certified labs used.
Negative factors
- Barren intercept.
- True thickness is estimated as a range, not a single value.
- Cut-off grade for compositing is not disclosed.
Evidence · table
“0.0”
Context: 1.0
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
DQ26-51Duquesne West · goldGrade: 0.2Grade Unit: g/tIntercept: 1 mView all detailsHide details
Identity
- Hole ID
- DQ26-51
- Project
- Duquesne West
- Commodity
- gold
- Region
- canada_qc
- Reported Region
- canada_qc
- Ticker
- AUOZ
Geometry
- Grade
- 0.2
- Grade Unit
- g/t
- Intercept
- 1 m
- From
- 51.8 m
- To
- 52.8 m
- Hole Depth
- 97 m
- Intercept Depth
- 42.5 m
Classification
- Deposit Type
- orogenic
- Program
- exploration
- Sample Type
- drill
- Group ID
- DQ26-51:51.8-52.8
- Mining Method
- open_pit
Location
- Loc. Confidence
- medium
QA/QC
- Laboratory
- SGS Val D'Or, Quebec and MSALabs in Val D'Or, Quebec and SGS Burnaby, British Columbia
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-10-20T00:00:00.000Z
Reasoning: This is a very low-grade, near-surface intercept from new drilling, contributing to the overall understanding of the open-pit potential, with good QA/QC disclosure.
Positive factors
- Near-surface intercept supporting open-pit potential.
- QA/QC procedures disclosed and certified labs used.
Negative factors
- Very low grade for gold.
- True thickness is estimated as a range, not a single value.
- Cut-off grade for compositing is not disclosed.
Evidence · table
“0.2”
Context: 1.0
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
DQ26-51Duquesne West · goldGrade: 0.1Grade Unit: g/tIntercept: 1 mView all detailsHide details
Identity
- Hole ID
- DQ26-51
- Project
- Duquesne West
- Commodity
- gold
- Region
- canada_qc
- Reported Region
- canada_qc
- Ticker
- AUOZ
Geometry
- Grade
- 0.1
- Grade Unit
- g/t
- Intercept
- 1 m
- From
- 52.8 m
- To
- 53.8 m
- Hole Depth
- 97 m
- Intercept Depth
- 42.5 m
Classification
- Deposit Type
- orogenic
- Program
- exploration
- Sample Type
- drill
- Group ID
- DQ26-51:52.8-53.8
- Mining Method
- open_pit
Location
- Loc. Confidence
- medium
QA/QC
- Laboratory
- SGS Val D'Or, Quebec and MSALabs in Val D'Or, Quebec and SGS Burnaby, British Columbia
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-10-20T00:00:00.000Z
Reasoning: This is a very low-grade, near-surface intercept from new drilling, contributing to the overall understanding of the open-pit potential, with good QA/QC disclosure.
Positive factors
- Near-surface intercept supporting open-pit potential.
- QA/QC procedures disclosed and certified labs used.
Negative factors
- Very low grade for gold.
- True thickness is estimated as a range, not a single value.
- Cut-off grade for compositing is not disclosed.
Evidence · table
“0.1”
Context: 1.0
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
DQ26-51Duquesne West · goldGrade: 0.5Grade Unit: g/tIntercept: 1 mView all detailsHide details
Identity
- Hole ID
- DQ26-51
- Project
- Duquesne West
- Commodity
- gold
- Region
- canada_qc
- Reported Region
- canada_qc
- Ticker
- AUOZ
Geometry
- Grade
- 0.5
- Grade Unit
- g/t
- Intercept
- 1 m
- From
- 53.8 m
- To
- 54.8 m
- Hole Depth
- 97 m
- Intercept Depth
- 42.5 m
Classification
- Deposit Type
- orogenic
- Program
- exploration
- Sample Type
- drill
- Group ID
- DQ26-51:53.8-54.8
- Mining Method
- open_pit
Location
- Loc. Confidence
- medium
QA/QC
- Laboratory
- SGS Val D'Or, Quebec and MSALabs in Val D'Or, Quebec and SGS Burnaby, British Columbia
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-10-20T00:00:00.000Z
Reasoning: This is a low-grade, near-surface intercept from new drilling, contributing to the overall understanding of the open-pit potential, with good QA/QC disclosure.
Positive factors
- Near-surface intercept supporting open-pit potential.
- QA/QC procedures disclosed and certified labs used.
Negative factors
- Low grade for gold.
- True thickness is estimated as a range, not a single value.
- Cut-off grade for compositing is not disclosed.
Evidence · table
“0.5”
Context: 1.0
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
DQ26-51Duquesne West · goldGrade: 0.5Grade Unit: g/tIntercept: 1 mView all detailsHide details
Identity
- Hole ID
- DQ26-51
- Project
- Duquesne West
- Commodity
- gold
- Region
- canada_qc
- Reported Region
- canada_qc
- Ticker
- AUOZ
Geometry
- Grade
- 0.5
- Grade Unit
- g/t
- Intercept
- 1 m
- From
- 54.8 m
- To
- 55.8 m
- Hole Depth
- 97 m
- Intercept Depth
- 42.5 m
Classification
- Deposit Type
- orogenic
- Program
- exploration
- Sample Type
- drill
- Group ID
- DQ26-51:54.8-55.8
- Mining Method
- open_pit
Location
- Loc. Confidence
- medium
QA/QC
- Laboratory
- SGS Val D'Or, Quebec and MSALabs in Val D'Or, Quebec and SGS Burnaby, British Columbia
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-10-20T00:00:00.000Z
Reasoning: This is a low-grade, near-surface intercept from new drilling, contributing to the overall understanding of the open-pit potential, with good QA/QC disclosure.
Positive factors
- Near-surface intercept supporting open-pit potential.
- QA/QC procedures disclosed and certified labs used.
Negative factors
- Low grade for gold.
- True thickness is estimated as a range, not a single value.
- Cut-off grade for compositing is not disclosed.
Evidence · table
“0.5”
Context: 1.0
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
DQ26-51Duquesne West · goldGrade: 0.4Grade Unit: g/tIntercept: 1 mView all detailsHide details
Identity
- Hole ID
- DQ26-51
- Project
- Duquesne West
- Commodity
- gold
- Region
- canada_qc
- Reported Region
- canada_qc
- Ticker
- AUOZ
Geometry
- Grade
- 0.4
- Grade Unit
- g/t
- Intercept
- 1 m
- From
- 55.8 m
- To
- 56.8 m
- Hole Depth
- 97 m
- Intercept Depth
- 42.5 m
Classification
- Deposit Type
- orogenic
- Program
- exploration
- Sample Type
- drill
- Group ID
- DQ26-51:55.8-56.8
- Mining Method
- open_pit
Location
- Loc. Confidence
- medium
QA/QC
- Laboratory
- SGS Val D'Or, Quebec and MSALabs in Val D'Or, Quebec and SGS Burnaby, British Columbia
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-10-20T00:00:00.000Z
Reasoning: This is a low-grade, near-surface intercept from new drilling, contributing to the overall understanding of the open-pit potential, with good QA/QC disclosure.
Positive factors
- Near-surface intercept supporting open-pit potential.
- QA/QC procedures disclosed and certified labs used.
Negative factors
- Low grade for gold.
- True thickness is estimated as a range, not a single value.
- Cut-off grade for compositing is not disclosed.
Evidence · table
“0.4”
Context: 1.0
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
DQ26-51Duquesne West · goldGrade: 0.4Grade Unit: g/tIntercept: 1 mView all detailsHide details
Identity
- Hole ID
- DQ26-51
- Project
- Duquesne West
- Commodity
- gold
- Region
- canada_qc
- Reported Region
- canada_qc
- Ticker
- AUOZ
Geometry
- Grade
- 0.4
- Grade Unit
- g/t
- Intercept
- 1 m
- From
- 56.8 m
- To
- 57.8 m
- Hole Depth
- 97 m
- Intercept Depth
- 42.5 m
Classification
- Deposit Type
- orogenic
- Program
- exploration
- Sample Type
- drill
- Group ID
- DQ26-51:56.8-57.8
- Mining Method
- open_pit
Location
- Loc. Confidence
- medium
QA/QC
- Laboratory
- SGS Val D'Or, Quebec and MSALabs in Val D'Or, Quebec and SGS Burnaby, British Columbia
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-10-20T00:00:00.000Z
Reasoning: This is a low-grade, near-surface intercept from new drilling, contributing to the overall understanding of the open-pit potential, with good QA/QC disclosure.
Positive factors
- Near-surface intercept supporting open-pit potential.
- QA/QC procedures disclosed and certified labs used.
Negative factors
- Low grade for gold.
- True thickness is estimated as a range, not a single value.
- Cut-off grade for compositing is not disclosed.
Evidence · table
“0.4”
Context: 1.0
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
DQ26-51Duquesne West · goldGrade: 0.5Grade Unit: g/tIntercept: 1 mView all detailsHide details
Identity
- Hole ID
- DQ26-51
- Project
- Duquesne West
- Commodity
- gold
- Region
- canada_qc
- Reported Region
- canada_qc
- Ticker
- AUOZ
Geometry
- Grade
- 0.5
- Grade Unit
- g/t
- Intercept
- 1 m
- From
- 57.8 m
- To
- 58.8 m
- Hole Depth
- 97 m
- Intercept Depth
- 42.5 m
Classification
- Deposit Type
- orogenic
- Program
- exploration
- Sample Type
- drill
- Group ID
- DQ26-51:57.8-58.8
- Mining Method
- open_pit
Location
- Loc. Confidence
- medium
QA/QC
- Laboratory
- SGS Val D'Or, Quebec and MSALabs in Val D'Or, Quebec and SGS Burnaby, British Columbia
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-10-20T00:00:00.000Z
Reasoning: This is a low-grade, near-surface intercept from new drilling, contributing to the overall understanding of the open-pit potential, with good QA/QC disclosure.
Positive factors
- Near-surface intercept supporting open-pit potential.
- QA/QC procedures disclosed and certified labs used.
Negative factors
- Low grade for gold.
- True thickness is estimated as a range, not a single value.
- Cut-off grade for compositing is not disclosed.
Evidence · table
“0.5”
Context: 1.0
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
DQ26-51Duquesne West · goldGrade: 2.1Grade Unit: g/tIntercept: 1 mView all detailsHide details
Identity
- Hole ID
- DQ26-51
- Project
- Duquesne West
- Commodity
- gold
- Region
- canada_qc
- Reported Region
- canada_qc
- Ticker
- AUOZ
Geometry
- Grade
- 2.1
- Grade Unit
- g/t
- Intercept
- 1 m
- From
- 58.8 m
- To
- 59.8 m
- Hole Depth
- 97 m
- Intercept Depth
- 42.5 m
Classification
- Deposit Type
- orogenic
- Program
- exploration
- Sample Type
- drill
- Group ID
- DQ26-51:58.8-59.8
- Mining Method
- open_pit
Location
- Loc. Confidence
- medium
QA/QC
- Laboratory
- SGS Val D'Or, Quebec and MSALabs in Val D'Or, Quebec and SGS Burnaby, British Columbia
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-10-20T00:00:00.000Z
Reasoning: This is a strong-grade, near-surface intercept from new drilling, contributing positively to the open-pit potential, with good QA/QC disclosure.
Positive factors
- Strong gold grade for an open-pit target.
- Near-surface intercept supporting open-pit potential.
- QA/QC procedures disclosed and certified labs used.
Negative factors
- Narrow intercept length.
- True thickness is estimated as a range, not a single value.
- Cut-off grade for compositing is not disclosed.
Evidence · table
“2.1”
Context: 1.0
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
DQ26-51Duquesne West · goldGrade: 0.6Grade Unit: g/tIntercept: 1 mView all detailsHide details
Identity
- Hole ID
- DQ26-51
- Project
- Duquesne West
- Commodity
- gold
- Region
- canada_qc
- Reported Region
- canada_qc
- Ticker
- AUOZ
Geometry
- Grade
- 0.6
- Grade Unit
- g/t
- Intercept
- 1 m
- From
- 59.8 m
- To
- 60.8 m
- Hole Depth
- 97 m
- Intercept Depth
- 42.5 m
Classification
- Deposit Type
- orogenic
- Program
- exploration
- Sample Type
- drill
- Group ID
- DQ26-51:59.8-60.8
- Mining Method
- open_pit
Location
- Loc. Confidence
- medium
QA/QC
- Laboratory
- SGS Val D'Or, Quebec and MSALabs in Val D'Or, Quebec and SGS Burnaby, British Columbia
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-10-20T00:00:00.000Z
Reasoning: This is a moderate-grade, near-surface intercept from new drilling, contributing to the overall understanding of the open-pit potential, with good QA/QC disclosure.
Positive factors
- Near-surface intercept supporting open-pit potential.
- QA/QC procedures disclosed and certified labs used.
Negative factors
- True thickness is estimated as a range, not a single value.
- Cut-off grade for compositing is not disclosed.
Evidence · table
“0.6”
Context: 1.0
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
DQ26-51Duquesne West · goldGrade: 1Grade Unit: g/tIntercept: 1 mView all detailsHide details
Identity
- Hole ID
- DQ26-51
- Project
- Duquesne West
- Commodity
- gold
- Region
- canada_qc
- Reported Region
- canada_qc
- Ticker
- AUOZ
Geometry
- Grade
- 1
- Grade Unit
- g/t
- Intercept
- 1 m
- From
- 60.8 m
- To
- 61.8 m
- Hole Depth
- 97 m
- Intercept Depth
- 42.5 m
Classification
- Deposit Type
- orogenic
- Program
- exploration
- Sample Type
- drill
- Group ID
- DQ26-51:60.8-61.8
- Mining Method
- open_pit
Location
- Loc. Confidence
- medium
QA/QC
- Laboratory
- SGS Val D'Or, Quebec and MSALabs in Val D'Or, Quebec and SGS Burnaby, British Columbia
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-10-20T00:00:00.000Z
Reasoning: This is a moderate-grade, near-surface intercept from new drilling, contributing positively to the open-pit potential, with good QA/QC disclosure.
Positive factors
- Moderate gold grade for an open-pit target.
- Near-surface intercept supporting open-pit potential.
- QA/QC procedures disclosed and certified labs used.
Negative factors
- Narrow intercept length.
- True thickness is estimated as a range, not a single value.
- Cut-off grade for compositing is not disclosed.
Evidence · table
“1.0”
Context: 1.0
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
DQ26-51Duquesne West · goldGrade: 0.5Grade Unit: g/tIntercept: 1 mView all detailsHide details
Identity
- Hole ID
- DQ26-51
- Project
- Duquesne West
- Commodity
- gold
- Region
- canada_qc
- Reported Region
- canada_qc
- Ticker
- AUOZ
Geometry
- Grade
- 0.5
- Grade Unit
- g/t
- Intercept
- 1 m
- From
- 61.8 m
- To
- 62.8 m
- Hole Depth
- 97 m
- Intercept Depth
- 42.5 m
Classification
- Deposit Type
- orogenic
- Program
- exploration
- Sample Type
- drill
- Group ID
- DQ26-51:61.8-62.8
- Mining Method
- open_pit
Location
- Loc. Confidence
- medium
QA/QC
- Laboratory
- SGS Val D'Or, Quebec and MSALabs in Val D'Or, Quebec and SGS Burnaby, British Columbia
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-10-20T00:00:00.000Z
Reasoning: This is a low-grade, near-surface intercept from new drilling, contributing to the overall understanding of the open-pit potential, with good QA/QC disclosure.
Positive factors
- Near-surface intercept supporting open-pit potential.
- QA/QC procedures disclosed and certified labs used.
Negative factors
- Low grade for gold.
- True thickness is estimated as a range, not a single value.
- Cut-off grade for compositing is not disclosed.
Evidence · table
“0.5”
Context: 1.0
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
DQ26-51Duquesne West · goldGrade: 0.3Grade Unit: g/tIntercept: 1 mView all detailsHide details
Identity
- Hole ID
- DQ26-51
- Project
- Duquesne West
- Commodity
- gold
- Region
- canada_qc
- Reported Region
- canada_qc
- Ticker
- AUOZ
Geometry
- Grade
- 0.3
- Grade Unit
- g/t
- Intercept
- 1 m
- From
- 62.8 m
- To
- 63.8 m
- Hole Depth
- 97 m
- Intercept Depth
- 42.5 m
Classification
- Deposit Type
- orogenic
- Program
- exploration
- Sample Type
- drill
- Group ID
- DQ26-51:62.8-63.8
- Mining Method
- open_pit
Location
- Loc. Confidence
- medium
QA/QC
- Laboratory
- SGS Val D'Or, Quebec and MSALabs in Val D'Or, Quebec and SGS Burnaby, British Columbia
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-10-20T00:00:00.000Z
Reasoning: This is a low-grade, near-surface intercept from new drilling, contributing to the overall understanding of the open-pit potential, with good QA/QC disclosure.
Positive factors
- Near-surface intercept supporting open-pit potential.
- QA/QC procedures disclosed and certified labs used.
Negative factors
- Low grade for gold.
- True thickness is estimated as a range, not a single value.
- Cut-off grade for compositing is not disclosed.
Evidence · table
“0.3”
Context: 1.0
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
DQ26-51Duquesne West · goldGrade: 7.1Grade Unit: g/tIntercept: 1.1 mView all detailsHide details
Identity
- Hole ID
- DQ26-51
- Project
- Duquesne West
- Commodity
- gold
- Region
- canada_qc
- Reported Region
- canada_qc
- Ticker
- AUOZ
Geometry
- Grade
- 7.1
- Grade Unit
- g/t
- Intercept
- 1.1 m
- From
- 63.8 m
- To
- 64.9 m
- Hole Depth
- 97 m
- Intercept Depth
- 42.5 m
Classification
- Deposit Type
- orogenic
- Program
- exploration
- Sample Type
- drill
- Group ID
- DQ26-51:63.8-64.9
- Mining Method
- open_pit
Location
- Loc. Confidence
- medium
QA/QC
- Laboratory
- SGS Val D'Or, Quebec and MSALabs in Val D'Or, Quebec and SGS Burnaby, British Columbia
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-10-20T00:00:00.000Z
Reasoning: This is an exceptional-grade, near-surface intercept from new drilling, significantly contributing to the open-pit potential, with good QA/QC disclosure.
Positive factors
- Exceptional gold grade for an open-pit target.
- Near-surface intercept supporting open-pit potential.
- QA/QC procedures disclosed and certified labs used.
Negative factors
- Narrow intercept length.
- True thickness is estimated as a range, not a single value.
- Cut-off grade for compositing is not disclosed.
Evidence · table
“7.1”
Context: 1.1
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
DQ26-51Duquesne West · goldGrade: 0.5Grade Unit: g/tIntercept: 1.5 mView all detailsHide details
Identity
- Hole ID
- DQ26-51
- Project
- Duquesne West
- Commodity
- gold
- Region
- canada_qc
- Reported Region
- canada_qc
- Ticker
- AUOZ
Geometry
- Grade
- 0.5
- Grade Unit
- g/t
- Intercept
- 1.5 m
- From
- 64.9 m
- To
- 66.4 m
- Hole Depth
- 97 m
- Intercept Depth
- 42.5 m
Classification
- Deposit Type
- orogenic
- Program
- exploration
- Sample Type
- drill
- Group ID
- DQ26-51:64.9-66.4
- Mining Method
- open_pit
Location
- Loc. Confidence
- medium
QA/QC
- Laboratory
- SGS Val D'Or, Quebec and MSALabs in Val D'Or, Quebec and SGS Burnaby, British Columbia
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-10-20T00:00:00.000Z
Reasoning: This is a low-grade, near-surface intercept from new drilling, contributing to the overall understanding of the open-pit potential, with good QA/QC disclosure.
Positive factors
- Near-surface intercept supporting open-pit potential.
- QA/QC procedures disclosed and certified labs used.
Negative factors
- Low grade for gold.
- True thickness is estimated as a range, not a single value.
- Cut-off grade for compositing is not disclosed.
Evidence · table
“0.5”
Context: 1.5
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
DQ26-51Duquesne West · goldGrade: 0Grade Unit: g/tIntercept: 1 mView all detailsHide details
Identity
- Hole ID
- DQ26-51
- Project
- Duquesne West
- Commodity
- gold
- Region
- canada_qc
- Reported Region
- canada_qc
- Ticker
- AUOZ
Geometry
- Grade
- 0
- Grade Unit
- g/t
- Intercept
- 1 m
- From
- 66.4 m
- To
- 67.4 m
- Hole Depth
- 97 m
- Intercept Depth
- 42.5 m
Classification
- Deposit Type
- orogenic
- Program
- exploration
- Sample Type
- drill
- Group ID
- DQ26-51:66.4-67.4
- Mining Method
- open_pit
Location
- Loc. Confidence
- medium
QA/QC
- Laboratory
- SGS Val D'Or, Quebec and MSALabs in Val D'Or, Quebec and SGS Burnaby, British Columbia
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-10-20T00:00:00.000Z
Reasoning: This is a barren, near-surface intercept from new drilling, contributing to the overall understanding of the open-pit potential, with good QA/QC disclosure.
Positive factors
- Near-surface intercept supporting open-pit potential.
- QA/QC procedures disclosed and certified labs used.
Negative factors
- Barren intercept.
- True thickness is estimated as a range, not a single value.
- Cut-off grade for compositing is not disclosed.
Evidence · table
“0.0”
Context: 1.0
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
DQ26-51Duquesne West · goldGrade: 0.5Grade Unit: g/tIntercept: 1.4 mView all detailsHide details
Identity
- Hole ID
- DQ26-51
- Project
- Duquesne West
- Commodity
- gold
- Region
- canada_qc
- Reported Region
- canada_qc
- Ticker
- AUOZ
Geometry
- Grade
- 0.5
- Grade Unit
- g/t
- Intercept
- 1.4 m
- From
- 67.4 m
- To
- 68.8 m
- Hole Depth
- 97 m
- Intercept Depth
- 42.5 m
Classification
- Deposit Type
- orogenic
- Program
- exploration
- Sample Type
- drill
- Group ID
- DQ26-51:67.4-68.8
- Mining Method
- open_pit
Location
- Loc. Confidence
- medium
QA/QC
- Laboratory
- SGS Val D'Or, Quebec and MSALabs in Val D'Or, Quebec and SGS Burnaby, British Columbia
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-10-20T00:00:00.000Z
Reasoning: This is a low-grade, near-surface intercept from new drilling, contributing to the overall understanding of the open-pit potential, with good QA/QC disclosure.
Positive factors
- Near-surface intercept supporting open-pit potential.
- QA/QC procedures disclosed and certified labs used.
Negative factors
- Low grade for gold.
- True thickness is estimated as a range, not a single value.
- Cut-off grade for compositing is not disclosed.
Evidence · table
“0.5”
Context: 1.4
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
DQ26-51Duquesne West · goldGrade: 4.3Grade Unit: g/tIntercept: 2 mView all detailsHide details
Identity
- Hole ID
- DQ26-51
- Project
- Duquesne West
- Commodity
- gold
- Region
- canada_qc
- Reported Region
- canada_qc
- Ticker
- AUOZ
Geometry
- Grade
- 4.3
- Grade Unit
- g/t
- Intercept
- 2 m
- From
- 46.8 m
- To
- 48.8 m
- Hole Depth
- 97 m
- Intercept Depth
- 42.5 m
Classification
- Deposit Type
- orogenic
- Program
- exploration
- Sample Type
- drill
- Group ID
- DQ26-51:46.8-48.8
- Mining Method
- open_pit
Location
- Loc. Confidence
- medium
QA/QC
- Laboratory
- SGS Val D'Or, Quebec and MSALabs in Val D'Or, Quebec and SGS Burnaby, British Columbia
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-10-20T00:00:00.000Z
Reasoning: This is a strong-grade, near-surface intercept from new drilling, contributing positively to the open-pit potential, with good QA/QC disclosure.
Positive factors
- Strong gold grade for an open-pit target.
- Near-surface intercept supporting open-pit potential.
- QA/QC procedures disclosed and certified labs used.
Negative factors
- True thickness is estimated as a range, not a single value.
- Cut-off grade for compositing is not disclosed.
Evidence · text
“2.0 m at 4.3 g/t Au”
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
DQ26-51Duquesne West · goldGrade: 2Grade Unit: g/tIntercept: 6.1 mView all detailsHide details
Identity
- Hole ID
- DQ26-51
- Project
- Duquesne West
- Commodity
- gold
- Region
- canada_qc
- Reported Region
- canada_qc
- Ticker
- AUOZ
Geometry
- Grade
- 2
- Grade Unit
- g/t
- Intercept
- 6.1 m
- From
- 58.8 m
- To
- 64.9 m
- Hole Depth
- 97 m
- Intercept Depth
- 42.5 m
Classification
- Deposit Type
- orogenic
- Program
- exploration
- Sample Type
- drill
- Group ID
- DQ26-51:58.8-64.9
- Mining Method
- open_pit
Location
- Loc. Confidence
- medium
QA/QC
- Laboratory
- SGS Val D'Or, Quebec and MSALabs in Val D'Or, Quebec and SGS Burnaby, British Columbia
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-10-20T00:00:00.000Z
Reasoning: This is a strong-grade, near-surface intercept from new drilling, contributing positively to the open-pit potential, with good QA/QC disclosure.
Positive factors
- Strong gold grade for an open-pit target.
- Near-surface intercept supporting open-pit potential.
- QA/QC procedures disclosed and certified labs used.
Negative factors
- True thickness is estimated as a range, not a single value.
- Cut-off grade for compositing is not disclosed.
Evidence · text
“6.1 m at 2.0 g/t Au”
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
DQ26-22Duquesne West · goldGrade: 1.2Grade Unit: g/tIntercept: 19.2 mView all detailsHide details
Identity
- Hole ID
- DQ26-22
- Project
- Duquesne West
- Commodity
- gold
- Region
- canada_qc
- Reported Region
- canada_qc
- Ticker
- AUOZ
Geometry
- Grade
- 1.2
- Grade Unit
- g/t
- Intercept
- 19.2 m
- From
- 111.1 m
- To
- 130.3 m
- Hole Depth
- 291 m
- Intercept Depth
- 111.1 m
Classification
- Deposit Type
- orogenic
- Program
- exploration
- Sample Type
- drill
- Group ID
- DQ26-22:111.1-130.3
- Mining Method
- open_pit
Location
- Loc. Confidence
- medium
QA/QC
- Laboratory
- SGS Val D'Or, Quebec and MSALabs in Val D'Or, Quebec and SGS Burnaby, British Columbia
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-10-20T00:00:00.000Z
Reasoning: This is a moderate-grade, good-width intercept from new drilling, contributing positively to the open-pit potential, with good QA/QC disclosure.
Positive factors
- Moderate gold grade over a good width for an open-pit target.
- QA/QC procedures disclosed and certified labs used.
Negative factors
- True thickness is estimated as a range, not a single value.
- Cut-off grade for compositing is not disclosed.
Evidence · text
“19.2 m grading 1.2 g/t Au”
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
DQ26-22Duquesne West · goldGrade: 2.8Grade Unit: g/tIntercept: 6.3 mView all detailsHide details
Identity
- Hole ID
- DQ26-22
- Project
- Duquesne West
- Commodity
- gold
- Region
- canada_qc
- Reported Region
- canada_qc
- Ticker
- AUOZ
Geometry
- Grade
- 2.8
- Grade Unit
- g/t
- Intercept
- 6.3 m
- From
- 124 m
- To
- 130.3 m
- Hole Depth
- 291 m
- Intercept Depth
- 111.1 m
Classification
- Deposit Type
- orogenic
- Program
- exploration
- Sample Type
- drill
- Group ID
- DQ26-22:124-130.3
- Mining Method
- open_pit
Location
- Loc. Confidence
- medium
QA/QC
- Laboratory
- SGS Val D'Or, Quebec and MSALabs in Val D'Or, Quebec and SGS Burnaby, British Columbia
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-10-20T00:00:00.000Z
Reasoning: This is a strong-grade sub-interval from new drilling, contributing positively to the open-pit potential, with good QA/QC disclosure.
Positive factors
- Strong gold grade for an open-pit target.
- QA/QC procedures disclosed and certified labs used.
Negative factors
- True thickness is estimated as a range, not a single value.
- Cut-off grade for compositing is not disclosed.
Evidence · text
“6.3 m at 2.8 g/t Au”
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
DQ26-23Duquesne West · goldGrade: 0.7Grade Unit: g/tIntercept: 6.5 mView all detailsHide details
Identity
- Hole ID
- DQ26-23
- Project
- Duquesne West
- Commodity
- gold
- Region
- canada_qc
- Reported Region
- canada_qc
- Ticker
- AUOZ
Geometry
- Grade
- 0.7
- Grade Unit
- g/t
- Intercept
- 6.5 m
- From
- 110.3 m
- To
- 116.8 m
- Hole Depth
- 285 m
- Intercept Depth
- 110.3 m
Classification
- Deposit Type
- orogenic
- Program
- exploration
- Sample Type
- drill
- Group ID
- DQ26-23:110.3-116.8
- Mining Method
- open_pit
Location
- Loc. Confidence
- medium
QA/QC
- Laboratory
- SGS Val D'Or, Quebec and MSALabs in Val D'Or, Quebec and SGS Burnaby, British Columbia
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-10-20T00:00:00.000Z
Reasoning: This is a moderate-grade intercept from new drilling, contributing to the overall understanding of the open-pit potential, with good QA/QC disclosure.
Positive factors
- Moderate gold grade for an open-pit target.
- QA/QC procedures disclosed and certified labs used.
Negative factors
- True thickness is estimated as a range, not a single value.
- Cut-off grade for compositing is not disclosed.
Evidence · table
“0.7”
Context: 6.5
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
DQ26-28Duquesne West · goldGrade: 0.4Grade Unit: g/tIntercept: 7 mView all detailsHide details
Identity
- Hole ID
- DQ26-28
- Project
- Duquesne West
- Commodity
- gold
- Region
- canada_qc
- Reported Region
- canada_qc
- Ticker
- AUOZ
Geometry
- Grade
- 0.4
- Grade Unit
- g/t
- Intercept
- 7 m
- From
- 82.2 m
- To
- 89.2 m
- Hole Depth
- 213 m
- Intercept Depth
- 82.2 m
Classification
- Deposit Type
- orogenic
- Program
- exploration
- Sample Type
- drill
- Group ID
- DQ26-28:82.2-89.2
- Mining Method
- open_pit
Location
- Loc. Confidence
- medium
QA/QC
- Laboratory
- SGS Val D'Or, Quebec and MSALabs in Val D'Or, Quebec and SGS Burnaby, British Columbia
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-10-20T00:00:00.000Z
Reasoning: This is a low-grade intercept from new drilling, contributing to the overall understanding of the open-pit potential, with good QA/QC disclosure.
Positive factors
- Near-surface intercept supporting open-pit potential.
- QA/QC procedures disclosed and certified labs used.
Negative factors
- Low grade for gold.
- True thickness is estimated as a range, not a single value.
- Cut-off grade for compositing is not disclosed.
Evidence · table
“0.4”
Context: 7.0
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
DQ26-29Duquesne West · goldGrade: 0.3Grade Unit: g/tIntercept: 19.3 mView all detailsHide details
Identity
- Hole ID
- DQ26-29
- Project
- Duquesne West
- Commodity
- gold
- Region
- canada_qc
- Reported Region
- canada_qc
- Ticker
- AUOZ
Geometry
- Grade
- 0.3
- Grade Unit
- g/t
- Intercept
- 19.3 m
- From
- 61 m
- To
- 80.3 m
- Hole Depth
- 174 m
- Intercept Depth
- 61 m
Classification
- Deposit Type
- orogenic
- Program
- exploration
- Sample Type
- drill
- Group ID
- DQ26-29:61-80.3
- Mining Method
- open_pit
Location
- Loc. Confidence
- medium
QA/QC
- Laboratory
- SGS Val D'Or, Quebec and MSALabs in Val D'Or, Quebec and SGS Burnaby, British Columbia
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-10-20T00:00:00.000Z
Reasoning: This is a low-grade, good-width intercept from new drilling, contributing to the overall understanding of the open-pit potential, with good QA/QC disclosure.
Positive factors
- Near-surface intercept supporting open-pit potential.
- Good intercept length.
- QA/QC procedures disclosed and certified labs used.
Negative factors
- Low grade for gold.
- True thickness is estimated as a range, not a single value.
- Cut-off grade for compositing is not disclosed.
Evidence · table
“0.3”
Context: 19.3
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
DQ26-58ADuquesne West · goldGrade: 1Grade Unit: g/tIntercept: 4.9 mView all detailsHide details
Identity
- Hole ID
- DQ26-58A
- Project
- Duquesne West
- Commodity
- gold
- Region
- canada_qc
- Reported Region
- canada_qc
- Ticker
- AUOZ
Geometry
- Grade
- 1
- Grade Unit
- g/t
- Intercept
- 4.9 m
- From
- 75.7 m
- To
- 80.5 m
- Hole Depth
- 111 m
- Intercept Depth
- 75.7 m
Classification
- Deposit Type
- orogenic
- Program
- exploration
- Sample Type
- drill
- Group ID
- DQ26-58A:75.7-80.5
- Mining Method
- open_pit
Location
- Loc. Confidence
- medium
QA/QC
- Laboratory
- SGS Val D'Or, Quebec and MSALabs in Val D'Or, Quebec and SGS Burnaby, British Columbia
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-10-20T00:00:00.000Z
Reasoning: This is a moderate-grade, near-surface intercept from new drilling, contributing positively to the open-pit potential, with good QA/QC disclosure.
Positive factors
- Moderate gold grade for an open-pit target.
- Near-surface intercept supporting open-pit potential.
- QA/QC procedures disclosed and certified labs used.
Negative factors
- True thickness is estimated as a range, not a single value.
- Cut-off grade for compositing is not disclosed.
Evidence · table
“1.0”
Context: 4.9
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
DQ26-38ADuquesne West · goldGrade: 0.9Grade Unit: g/tIntercept: 1 mView all detailsHide details
Identity
- Hole ID
- DQ26-38A
- Project
- Duquesne West
- Commodity
- gold
- Region
- canada_qc
- Reported Region
- canada_qc
- Ticker
- AUOZ
Geometry
- Grade
- 0.9
- Grade Unit
- g/t
- Intercept
- 1 m
- From
- 235.3 m
- To
- 236.3 m
- Hole Depth
- 303 m
- Intercept Depth
- 235.3 m
Classification
- Deposit Type
- orogenic
- Program
- exploration
- Sample Type
- drill
- Group ID
- DQ26-38A:235.3-236.3
- Mining Method
- open_pit
Location
- Loc. Confidence
- medium
QA/QC
- Laboratory
- SGS Val D'Or, Quebec and MSALabs in Val D'Or, Quebec and SGS Burnaby, British Columbia
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-10-20T00:00:00.000Z
Reasoning: This is a moderate-grade, narrow intercept from new drilling, contributing to the overall understanding of the open-pit potential, with good QA/QC disclosure.
Positive factors
- Moderate gold grade for an open-pit target.
- QA/QC procedures disclosed and certified labs used.
Negative factors
- Narrow intercept length.
- True thickness is estimated as a range, not a single value.
- Cut-off grade for compositing is not disclosed.
Evidence · table
“0.9”
Context: 1.0
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
DQ26-43Duquesne West · goldGrade: 3Grade Unit: g/tIntercept: 21.3 mView all detailsHide details
Identity
- Hole ID
- DQ26-43
- Project
- Duquesne West
- Commodity
- gold
- Region
- canada_qc
- Reported Region
- canada_qc
- Ticker
- AUOZ
Geometry
- Grade
- 3
- Grade Unit
- g/t
- Intercept
- 21.3 m
- From
- 64.9 m
- To
- 86.7 m
- Intercept Depth
- 64.9 m
Classification
- Deposit Type
- orogenic
- Program
- exploration
- Sample Type
- drill
- Group ID
- DQ26-43:64.9-86.7
- Mining Method
- open_pit
Location
- Loc. Confidence
- medium
QA/QC
- Laboratory
- SGS Val D'Or, Quebec and MSALabs in Val D'Or, Quebec and SGS Burnaby, British Columbia
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-10-20T00:00:00.000Z
Reasoning: This is a strong-grade, good-width, near-surface intercept from new drilling, significantly contributing to the open-pit potential, with good QA/QC disclosure.
Positive factors
- Strong gold grade over a good width for an open-pit target.
- Near-surface intercept supporting open-pit potential.
- QA/QC procedures disclosed and certified labs used.
Negative factors
- True thickness is estimated as a range, not a single value.
- Cut-off grade for compositing is not disclosed.
Evidence · table
“3.0”
Context: 21.3
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
DQ26-34Duquesne West · goldGrade: 2.7Grade Unit: g/tIntercept: 9.5 mView all detailsHide details
Identity
- Hole ID
- DQ26-34
- Project
- Duquesne West
- Commodity
- gold
- Region
- canada_qc
- Reported Region
- canada_qc
- Ticker
- AUOZ
Geometry
- Grade
- 2.7
- Grade Unit
- g/t
- Intercept
- 9.5 m
- From
- 53.8 m
- To
- 63.3 m
- Intercept Depth
- 53.8 m
Classification
- Deposit Type
- orogenic
- Program
- exploration
- Sample Type
- drill
- Group ID
- DQ26-34:53.8-63.3
- Mining Method
- open_pit
Location
- Loc. Confidence
- medium
QA/QC
- Laboratory
- SGS Val D'Or, Quebec and MSALabs in Val D'Or, Quebec and SGS Burnaby, British Columbia
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-10-20T00:00:00.000Z
Reasoning: This is a strong-grade, near-surface intercept from new drilling, contributing positively to the open-pit potential, with good QA/QC disclosure.
Positive factors
- Strong gold grade for an open-pit target.
- Near-surface intercept supporting open-pit potential.
- QA/QC procedures disclosed and certified labs used.
Negative factors
- True thickness is estimated as a range, not a single value.
- Cut-off grade for compositing is not disclosed.
Evidence · table
“2.7”
Context: 9.5
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
DQ26-52Duquesne West · goldGrade: 2.6Grade Unit: g/tIntercept: 24.1 mView all detailsHide details
Identity
- Hole ID
- DQ26-52
- Project
- Duquesne West
- Commodity
- gold
- Region
- canada_qc
- Reported Region
- canada_qc
- Ticker
- AUOZ
Geometry
- Grade
- 2.6
- Grade Unit
- g/t
- Intercept
- 24.1 m
- From
- 45.2 m
- To
- 69.4 m
- Intercept Depth
- 45.2 m
Classification
- Deposit Type
- orogenic
- Program
- exploration
- Sample Type
- drill
- Group ID
- DQ26-52:45.2-69.4
- Mining Method
- open_pit
Location
- Loc. Confidence
- medium
QA/QC
- Laboratory
- SGS Val D'Or, Quebec and MSALabs in Val D'Or, Quebec and SGS Burnaby, British Columbia
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-10-20T00:00:00.000Z
Reasoning: This is a strong-grade, good-width, near-surface intercept from new drilling, significantly contributing to the open-pit potential, with good QA/QC disclosure.
Positive factors
- Strong gold grade over a good width for an open-pit target.
- Near-surface intercept supporting open-pit potential.
- QA/QC procedures disclosed and certified labs used.
Negative factors
- True thickness is estimated as a range, not a single value.
- Cut-off grade for compositing is not disclosed.
Evidence · table
“2.6”
Context: 24.1
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
DQ26-12Duquesne West · goldGrade: 2.6Grade Unit: g/tIntercept: 2.3 mView all detailsHide details
Identity
- Hole ID
- DQ26-12
- Project
- Duquesne West
- Commodity
- gold
- Region
- canada_qc
- Reported Region
- canada_qc
- Ticker
- AUOZ
Geometry
- Grade
- 2.6
- Grade Unit
- g/t
- Intercept
- 2.3 m
- From
- 98.1 m
- To
- 100.3 m
- Intercept Depth
- 98.1 m
Classification
- Deposit Type
- orogenic
- Program
- exploration
- Sample Type
- drill
- Group ID
- DQ26-12:98.1-100.3
- Mining Method
- open_pit
Location
- Loc. Confidence
- medium
QA/QC
- Laboratory
- SGS Val D'Or, Quebec and MSALabs in Val D'Or, Quebec and SGS Burnaby, British Columbia
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-10-20T00:00:00.000Z
Reasoning: This is a strong-grade, narrow intercept from new drilling, contributing positively to the open-pit potential, with good QA/QC disclosure.
Positive factors
- Strong gold grade for an open-pit target.
- QA/QC procedures disclosed and certified labs used.
Negative factors
- Narrow intercept length.
- True thickness is estimated as a range, not a single value.
- Cut-off grade for compositing is not disclosed.
Evidence · table
“2.6”
Context: 2.3
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
DQ26-53Duquesne West · goldGrade: 2.2Grade Unit: g/tIntercept: 14.3 mView all detailsHide details
Identity
- Hole ID
- DQ26-53
- Project
- Duquesne West
- Commodity
- gold
- Region
- canada_qc
- Reported Region
- canada_qc
- Ticker
- AUOZ
Geometry
- Grade
- 2.2
- Grade Unit
- g/t
- Intercept
- 14.3 m
- From
- 50 m
- To
- 64.3 m
- Intercept Depth
- 50 m
Classification
- Deposit Type
- orogenic
- Program
- exploration
- Sample Type
- drill
- Group ID
- DQ26-53:50-64.3
- Mining Method
- open_pit
Location
- Loc. Confidence
- medium
QA/QC
- Laboratory
- SGS Val D'Or, Quebec and MSALabs in Val D'Or, Quebec and SGS Burnaby, British Columbia
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-10-20T00:00:00.000Z
Reasoning: This is a strong-grade, good-width, near-surface intercept from new drilling, contributing positively to the open-pit potential, with good QA/QC disclosure.
Positive factors
- Strong gold grade over a good width for an open-pit target.
- Near-surface intercept supporting open-pit potential.
- QA/QC procedures disclosed and certified labs used.
Negative factors
- True thickness is estimated as a range, not a single value.
- Cut-off grade for compositing is not disclosed.
Evidence · table
“2.2”
Context: 14.3
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
DQ26-26Duquesne West · goldGrade: 2.1Grade Unit: g/tIntercept: 7 mView all detailsHide details
Identity
- Hole ID
- DQ26-26
- Project
- Duquesne West
- Commodity
- gold
- Region
- canada_qc
- Reported Region
- canada_qc
- Ticker
- AUOZ
Geometry
- Grade
- 2.1
- Grade Unit
- g/t
- Intercept
- 7 m
- From
- 140 m
- To
- 147 m
- Intercept Depth
- 140 m
Classification
- Deposit Type
- orogenic
- Program
- exploration
- Sample Type
- drill
- Group ID
- DQ26-26:140-147
- Mining Method
- open_pit
Location
- Loc. Confidence
- medium
QA/QC
- Laboratory
- SGS Val D'Or, Quebec and MSALabs in Val D'Or, Quebec and SGS Burnaby, British Columbia
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-10-20T00:00:00.000Z
Reasoning: This is a strong-grade intercept from new drilling, contributing positively to the open-pit potential, with good QA/QC disclosure.
Positive factors
- Strong gold grade for an open-pit target.
- QA/QC procedures disclosed and certified labs used.
Negative factors
- True thickness is estimated as a range, not a single value.
- Cut-off grade for compositing is not disclosed.
Evidence · table
“2.1”
Context: 7.0
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
DQ26-17Duquesne West · goldGrade: 1.6Grade Unit: g/tIntercept: 5.5 mView all detailsHide details
Identity
- Hole ID
- DQ26-17
- Project
- Duquesne West
- Commodity
- gold
- Region
- canada_qc
- Reported Region
- canada_qc
- Ticker
- AUOZ
Geometry
- Grade
- 1.6
- Grade Unit
- g/t
- Intercept
- 5.5 m
- From
- 90.1 m
- To
- 95.5 m
- Intercept Depth
- 90.1 m
Classification
- Deposit Type
- orogenic
- Program
- exploration
- Sample Type
- drill
- Group ID
- DQ26-17:90.1-95.5
- Mining Method
- open_pit
Location
- Loc. Confidence
- medium
QA/QC
- Laboratory
- SGS Val D'Or, Quebec and MSALabs in Val D'Or, Quebec and SGS Burnaby, British Columbia
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-10-20T00:00:00.000Z
Reasoning: This is a moderate-grade intercept from new drilling, contributing positively to the open-pit potential, with good QA/QC disclosure.
Positive factors
- Moderate gold grade for an open-pit target.
- QA/QC procedures disclosed and certified labs used.
Negative factors
- True thickness is estimated as a range, not a single value.
- Cut-off grade for compositing is not disclosed.
Evidence · table
“1.6”
Context: 5.5
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
DQ26-32Duquesne West · goldGrade: 1.6Grade Unit: g/tIntercept: 12 mView all detailsHide details
Identity
- Hole ID
- DQ26-32
- Project
- Duquesne West
- Commodity
- gold
- Region
- canada_qc
- Reported Region
- canada_qc
- Ticker
- AUOZ
Geometry
- Grade
- 1.6
- Grade Unit
- g/t
- Intercept
- 12 m
- From
- 66.2 m
- To
- 78.2 m
- Intercept Depth
- 66.2 m
Classification
- Deposit Type
- orogenic
- Program
- exploration
- Sample Type
- drill
- Group ID
- DQ26-32:66.2-78.2
- Mining Method
- open_pit
Location
- Loc. Confidence
- medium
QA/QC
- Laboratory
- SGS Val D'Or, Quebec and MSALabs in Val D'Or, Quebec and SGS Burnaby, British Columbia
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-10-20T00:00:00.000Z
Reasoning: This is a moderate-grade, good-width, near-surface intercept from new drilling, contributing positively to the open-pit potential, with good QA/QC disclosure.
Positive factors
- Moderate gold grade over a good width for an open-pit target.
- Near-surface intercept supporting open-pit potential.
- QA/QC procedures disclosed and certified labs used.
Negative factors
- True thickness is estimated as a range, not a single value.
- Cut-off grade for compositing is not disclosed.
Evidence · table
“1.6”
Context: 12.0
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
DQ26-30Duquesne West · goldGrade: 1.6Grade Unit: g/tIntercept: 7.1 mView all detailsHide details
Identity
- Hole ID
- DQ26-30
- Project
- Duquesne West
- Commodity
- gold
- Region
- canada_qc
- Reported Region
- canada_qc
- Ticker
- AUOZ
Geometry
- Grade
- 1.6
- Grade Unit
- g/t
- Intercept
- 7.1 m
- From
- 125.4 m
- To
- 132.5 m
- Intercept Depth
- 125.4 m
Classification
- Deposit Type
- orogenic
- Program
- exploration
- Sample Type
- drill
- Group ID
- DQ26-30:125.4-132.5
- Mining Method
- open_pit
Location
- Loc. Confidence
- medium
QA/QC
- Laboratory
- SGS Val D'Or, Quebec and MSALabs in Val D'Or, Quebec and SGS Burnaby, British Columbia
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-10-20T00:00:00.000Z
Reasoning: This is a moderate-grade intercept from new drilling, contributing positively to the open-pit potential, with good QA/QC disclosure.
Positive factors
- Moderate gold grade for an open-pit target.
- QA/QC procedures disclosed and certified labs used.
Negative factors
- True thickness is estimated as a range, not a single value.
- Cut-off grade for compositing is not disclosed.
Evidence · table
“1.6”
Context: 7.1
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
DQ26-50Duquesne West · goldGrade: 1.3Grade Unit: g/tIntercept: 4.1 mView all detailsHide details
Identity
- Hole ID
- DQ26-50
- Project
- Duquesne West
- Commodity
- gold
- Region
- canada_qc
- Reported Region
- canada_qc
- Ticker
- AUOZ
Geometry
- Grade
- 1.3
- Grade Unit
- g/t
- Intercept
- 4.1 m
- From
- 40 m
- To
- 44.1 m
- Intercept Depth
- 40 m
Classification
- Deposit Type
- orogenic
- Program
- exploration
- Sample Type
- drill
- Group ID
- DQ26-50:40-44.1
- Mining Method
- open_pit
Location
- Loc. Confidence
- medium
QA/QC
- Laboratory
- SGS Val D'Or, Quebec and MSALabs in Val D'Or, Quebec and SGS Burnaby, British Columbia
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-10-20T00:00:00.000Z
Reasoning: This is a moderate-grade, near-surface intercept from new drilling, contributing positively to the open-pit potential, with good QA/QC disclosure.
Positive factors
- Moderate gold grade for an open-pit target.
- Near-surface intercept supporting open-pit potential.
- QA/QC procedures disclosed and certified labs used.
Negative factors
- True thickness is estimated as a range, not a single value.
- Cut-off grade for compositing is not disclosed.
Evidence · table
“1.3”
Context: 4.1
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
DQ26-18Duquesne West · goldGrade: 1Grade Unit: g/tIntercept: 7 mView all detailsHide details
Identity
- Hole ID
- DQ26-18
- Project
- Duquesne West
- Commodity
- gold
- Region
- canada_qc
- Reported Region
- canada_qc
- Ticker
- AUOZ
Geometry
- Grade
- 1
- Grade Unit
- g/t
- Intercept
- 7 m
- From
- 96.9 m
- To
- 103.9 m
- Intercept Depth
- 96.9 m
Classification
- Deposit Type
- orogenic
- Program
- exploration
- Sample Type
- drill
- Group ID
- DQ26-18:96.9-103.9
- Mining Method
- open_pit
Location
- Loc. Confidence
- medium
QA/QC
- Laboratory
- SGS Val D'Or, Quebec and MSALabs in Val D'Or, Quebec and SGS Burnaby, British Columbia
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-10-20T00:00:00.000Z
Reasoning: This is a moderate-grade intercept from new drilling, contributing positively to the open-pit potential, with good QA/QC disclosure.
Positive factors
- Moderate gold grade for an open-pit target.
- QA/QC procedures disclosed and certified labs used.
Negative factors
- True thickness is estimated as a range, not a single value.
- Cut-off grade for compositing is not disclosed.
Evidence · table
“1.0”
Context: 7.0
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
How Atlas produces this analysis
Minestarters Atlas uses automated extraction to summarize mining announcements, identify reported measurements, and classify supporting evidence. Sentiment reflects the extracted narrative and classification rules; it is an interpretation, not a reported measurement. Evidence quotes and context are provided where available. Missing data, low-confidence results, and review flags indicate limitations. Check the original publisher announcement before relying on an interpretation.