District Confirms MobileMT Geophysical Anomalies by Intersecting Graphitic Black Shale in Every Drill Hole at the Alum Shale Properties in Sweden
Original announcement by orestocks on
- Company
- District Metals Corp.
- Ticker
- DMX.V
- Exchange
- Unavailable
- Region
- Sweden
- Primary commodity
- Uranium
- Secondary commodities
- Vanadium, Potash, Molybdenum, Nickel, Copper, Zinc
- Document categories
- Drill results
- Extracted
- 2026-09-09 07:04:40 UTC
Analysis by Minestarters Atlas
Minestarters Atlas analysis
Summary
District Metals Corp. completed its inaugural 1,943-meter diamond drilling program at the Österkälen and Malgomaj mineral licenses in central Sweden, successfully intersecting graphitic black shale in all 15 drill holes. This validates the company's MobileMT geophysical survey in identifying target horizons in previously undrilled areas. Geochemical assay results are pending and will be required to determine the presence and grade of mineralization within the Alum Shale.
Reasoning: The drilling program successfully confirmed the presence of the target Alum Shale formation in all holes, validating the geophysical targeting method in a new exploration area. However, the lack of assay results means the economic implications are yet to be determined.
Positive factors
- All 15 drill holes successfully intersected the target graphitic black shale, validating the MobileMT geophysical survey.
- This was an inaugural drilling program in previously undrilled areas, indicating new exploration success.
Negative factors
- No assay results are available yet, so the economic significance of the intercepts is unknown.
- Three drill holes were abandoned due to poor ground conditions, indicating potential drilling challenges.
Low confidence — this extraction should be reviewed alongside the original source.
Facts used in scoring: 41
Classification and evidence
Exploration Drillingpositive · Story-specific tag
No canonical definition is currently available.
Why it applies: The document describes an 'inaugural diamond drilling program' in 'areas which has not seen any historic exploration work', indicating an exploration-stage campaign.
Evidence · text
“inaugural diamond drilling program at the Österkälen and Malgomaj mineral licenses, which forms part of the Company's 100% owned Alum Shale Properties in central Sweden. These areas have never been drilled for mineral exploration.”
Target Confirmedpositive · Story-specific tag
No canonical definition is currently available.
Why it applies: All 15 drill holes successfully intersected the graphitic black shale, validating the MobileMT geophysical survey's effectiveness in identifying target horizons.
Evidence · text
“All 15 drill holes intersected graphitic black shale, which demonstrates the effectiveness of the MobileMT survey in identifying and targeting conductive horizons interpreted to represent graphitic Alum Shale.”
No Assay Resultsnegative · Story-specific tag
No canonical definition is currently available.
Why it applies: The release explicitly states that geochemical results are pending and required to determine the presence, grade, and continuity of mineralization.
Evidence · text
“Geochemical results will be required to determine the presence, grade and continuity of mineralized Alum Shale horizons, as visual drill core logging and radioactivity alone is not sufficient to establish mineralization.”
Apparent Width Onlynegative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Why it applies: The reported intervals are described as 'total composite down-hole thickness' without any mention of true width or drill orientation relative to structure.
Evidence · text
“Approximate total composite down-hole thickness of interpreted Alum Shale Formation”
QP/CP Signedpositive · Story-specific tag
Qualified Person (QP) or Competent Person (CP) named and signed off — a member of a recognized professional association (e.g., AusIMM, SME, AIG, P.Geo) with relevant experience.
Why it applies: The technical information in the news release has been prepared by and approved by Garrett Ainsworth, P.Geo, a Qualified Person under NI 43-101.
Evidence · text
“All scientific and technical information in this news release has been prepared by, or approved by Garrett Ainsworth, P.Geo, President and CEO of the Company. Mr. Ainsworth is a Qualified Person for the purposes of National Instrument 43-101”
Mill Routeneutral
Processing via mill or concentrator (CIL, CIP, tank leach, flotation).
Why it applies: the document describes a mill_cil route ("CIP")
Extracted facts
Stored fact records: 41. Some facts used in scoring do not have a stored record.
Drill Results (41)
OST-26-001Alum Shale PropertiesIntercept: 8.6 mView all detailsHide details
Identity
- Hole ID
- OST-26-001
- Project
- Alum Shale Properties
- Region
- sweden
- Reported Region
- sweden
- Ticker
- DMX.V
Geometry
- Intercept
- 8.6 m
- From
- 48 m
- To
- 56.6 m
- Hole Depth
- 128.7 m
- Intercept Depth
- 48 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- OST-26-001:48-56.6
- Mining Method
- unknown
Location
- Location
- Österkälen nr 101
- Dip
- -90 °
- Loc. Source
- document
QA/QC
- QP Signed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-09T00:00:00.000Z
Reasoning: This intercept confirms the presence of the target lithology in a new exploration area, but its economic significance is unknown without assay results.
Positive factors
- Intercepted target lithology (graphitic black shale).
Negative factors
- No assay results reported.
Evidence · table
“8.60”
Context: 48.00
Tags used in scoring
No QA/QC Disclosurenegative
Release does not disclose QA/QC — lab certification, CP/QP sign-off and assay protocols cannot be checked from this document.
Why it applies: qaqc_disclosed is not true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
OST-26-001Alum Shale PropertiesIntercept: 45.6 mView all detailsHide details
Identity
- Hole ID
- OST-26-001
- Project
- Alum Shale Properties
- Region
- sweden
- Reported Region
- sweden
- Ticker
- DMX.V
Geometry
- Intercept
- 45.6 m
- From
- 56.6 m
- To
- 102.2 m
- Hole Depth
- 128.7 m
- Intercept Depth
- 48 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- OST-26-001:56.6-102.2
- Mining Method
- unknown
Location
- Location
- Österkälen nr 101
- Dip
- -90 °
- Loc. Source
- document
QA/QC
- QP Signed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-09T00:00:00.000Z
Reasoning: This intercept confirms the presence of the target lithology in a new exploration area, but its economic significance is unknown without assay results.
Positive factors
- Intercepted target lithology (grey-dark grey shale).
Negative factors
- No assay results reported.
Evidence · table
“45.60”
Context: 56.60
Tags used in scoring
No QA/QC Disclosurenegative
Release does not disclose QA/QC — lab certification, CP/QP sign-off and assay protocols cannot be checked from this document.
Why it applies: qaqc_disclosed is not true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
OST-26-001Alum Shale PropertiesIntercept: 2.8 mView all detailsHide details
Identity
- Hole ID
- OST-26-001
- Project
- Alum Shale Properties
- Region
- sweden
- Reported Region
- sweden
- Ticker
- DMX.V
Geometry
- Intercept
- 2.8 m
- From
- 102.2 m
- To
- 105 m
- Hole Depth
- 128.7 m
- Intercept Depth
- 48 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- OST-26-001:102.2-105
- Mining Method
- unknown
Location
- Location
- Österkälen nr 101
- Dip
- -90 °
- Loc. Source
- document
QA/QC
- QP Signed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-09T00:00:00.000Z
Reasoning: This intercept confirms the presence of the target lithology in a new exploration area, but its economic significance is unknown without assay results.
Positive factors
- Intercepted target lithology (graphitic black shale).
Negative factors
- No assay results reported.
Evidence · table
“2.80”
Context: 102.20
Tags used in scoring
No QA/QC Disclosurenegative
Release does not disclose QA/QC — lab certification, CP/QP sign-off and assay protocols cannot be checked from this document.
Why it applies: qaqc_disclosed is not true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
OST-26-002Alum Shale PropertiesIntercept: 3.55 mView all detailsHide details
Identity
- Hole ID
- OST-26-002
- Project
- Alum Shale Properties
- Region
- sweden
- Reported Region
- sweden
- Ticker
- DMX.V
Geometry
- Intercept
- 3.55 m
- From
- 36.35 m
- To
- 39.9 m
- Hole Depth
- 123 m
- Intercept Depth
- 36.35 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- OST-26-002:36.35-39.9
- Mining Method
- unknown
Location
- Location
- Österkälen nr 101
- Dip
- -90 °
- Loc. Source
- document
QA/QC
- QP Signed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-09T00:00:00.000Z
Reasoning: This intercept confirms the presence of the target lithology in a new exploration area, but its economic significance is unknown without assay results.
Positive factors
- Intercepted target lithology (graphitic black shale).
Negative factors
- No assay results reported.
Evidence · table
“3.55”
Context: 36.35
Tags used in scoring
No QA/QC Disclosurenegative
Release does not disclose QA/QC — lab certification, CP/QP sign-off and assay protocols cannot be checked from this document.
Why it applies: qaqc_disclosed is not true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
OST-26-002Alum Shale PropertiesIntercept: 7.15 mView all detailsHide details
Identity
- Hole ID
- OST-26-002
- Project
- Alum Shale Properties
- Region
- sweden
- Reported Region
- sweden
- Ticker
- DMX.V
Geometry
- Intercept
- 7.15 m
- From
- 46.95 m
- To
- 54.1 m
- Hole Depth
- 123 m
- Intercept Depth
- 36.35 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- OST-26-002:46.95-54.1
- Mining Method
- unknown
Location
- Location
- Österkälen nr 101
- Dip
- -90 °
- Loc. Source
- document
QA/QC
- QP Signed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-09T00:00:00.000Z
Reasoning: This intercept confirms the presence of the target lithology in a new exploration area, but its economic significance is unknown without assay results.
Positive factors
- Intercepted target lithology (graphitic black shale).
Negative factors
- No assay results reported.
Evidence · table
“7.15”
Context: 46.95
Tags used in scoring
No QA/QC Disclosurenegative
Release does not disclose QA/QC — lab certification, CP/QP sign-off and assay protocols cannot be checked from this document.
Why it applies: qaqc_disclosed is not true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
OST-26-002Alum Shale PropertiesIntercept: 52.8 mView all detailsHide details
Identity
- Hole ID
- OST-26-002
- Project
- Alum Shale Properties
- Region
- sweden
- Reported Region
- sweden
- Ticker
- DMX.V
Geometry
- Intercept
- 52.8 m
- From
- 54.1 m
- To
- 106.9 m
- Hole Depth
- 123 m
- Intercept Depth
- 36.35 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- OST-26-002:54.1-106.9
- Mining Method
- unknown
Location
- Location
- Österkälen nr 101
- Dip
- -90 °
- Loc. Source
- document
QA/QC
- QP Signed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-09T00:00:00.000Z
Reasoning: This intercept confirms the presence of the target lithology in a new exploration area, but its economic significance is unknown without assay results.
Positive factors
- Intercepted target lithology (grey-dark grey shale).
Negative factors
- No assay results reported.
Evidence · table
“52.80”
Context: 54.10
Tags used in scoring
No QA/QC Disclosurenegative
Release does not disclose QA/QC — lab certification, CP/QP sign-off and assay protocols cannot be checked from this document.
Why it applies: qaqc_disclosed is not true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
OST-26-003Alum Shale PropertiesIntercept: 10.8 mView all detailsHide details
Identity
- Hole ID
- OST-26-003
- Project
- Alum Shale Properties
- Region
- sweden
- Reported Region
- sweden
- Ticker
- DMX.V
Geometry
- Intercept
- 10.8 m
- From
- 16.55 m
- To
- 27.35 m
- Hole Depth
- 100.75 m
- Intercept Depth
- 16.55 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- OST-26-003:16.55-27.35
- Mining Method
- unknown
Location
- Location
- Österkälen nr 101
- Dip
- -90 °
- Loc. Source
- document
QA/QC
- QP Signed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-09T00:00:00.000Z
Reasoning: This intercept confirms the presence of the target lithology in a new exploration area, but its economic significance is unknown without assay results.
Positive factors
- Intercepted target lithology (graphitic black shale).
Negative factors
- No assay results reported.
Evidence · table
“10.80”
Context: 16.55
Tags used in scoring
No QA/QC Disclosurenegative
Release does not disclose QA/QC — lab certification, CP/QP sign-off and assay protocols cannot be checked from this document.
Why it applies: qaqc_disclosed is not true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
OST-26-003Alum Shale PropertiesIntercept: 4 mView all detailsHide details
Identity
- Hole ID
- OST-26-003
- Project
- Alum Shale Properties
- Region
- sweden
- Reported Region
- sweden
- Ticker
- DMX.V
Geometry
- Intercept
- 4 m
- From
- 45 m
- To
- 49 m
- Hole Depth
- 100.75 m
- Intercept Depth
- 16.55 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- OST-26-003:45-49
- Mining Method
- unknown
Location
- Location
- Österkälen nr 101
- Dip
- -90 °
- Loc. Source
- document
QA/QC
- QP Signed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-09T00:00:00.000Z
Reasoning: This intercept confirms the presence of the target lithology in a new exploration area, but its economic significance is unknown without assay results.
Positive factors
- Intercepted target lithology (graphitic black shale).
Negative factors
- No assay results reported.
Evidence · table
“4.00”
Context: 45.00
Tags used in scoring
No QA/QC Disclosurenegative
Release does not disclose QA/QC — lab certification, CP/QP sign-off and assay protocols cannot be checked from this document.
Why it applies: qaqc_disclosed is not true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
OST-26-003Alum Shale PropertiesIntercept: 42.55 mView all detailsHide details
Identity
- Hole ID
- OST-26-003
- Project
- Alum Shale Properties
- Region
- sweden
- Reported Region
- sweden
- Ticker
- DMX.V
Geometry
- Intercept
- 42.55 m
- From
- 49 m
- To
- 91.55 m
- Hole Depth
- 100.75 m
- Intercept Depth
- 16.55 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- OST-26-003:49-91.55
- Mining Method
- unknown
Location
- Location
- Österkälen nr 101
- Dip
- -90 °
- Loc. Source
- document
QA/QC
- QP Signed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-09T00:00:00.000Z
Reasoning: This intercept confirms the presence of the target lithology in a new exploration area, but its economic significance is unknown without assay results.
Positive factors
- Intercepted target lithology (grey-dark grey shale).
Negative factors
- No assay results reported.
Evidence · table
“42.55”
Context: 49.00
Tags used in scoring
No QA/QC Disclosurenegative
Release does not disclose QA/QC — lab certification, CP/QP sign-off and assay protocols cannot be checked from this document.
Why it applies: qaqc_disclosed is not true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
OST-26-004Alum Shale PropertiesIntercept: 10.55 mView all detailsHide details
Identity
- Hole ID
- OST-26-004
- Project
- Alum Shale Properties
- Region
- sweden
- Reported Region
- sweden
- Ticker
- DMX.V
Geometry
- Intercept
- 10.55 m
- From
- 33.35 m
- To
- 43.9 m
- Hole Depth
- 98.7 m
- Intercept Depth
- 33.35 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- OST-26-004:33.35-43.9
- Mining Method
- unknown
Location
- Location
- Österkälen nr 101
- Dip
- -90 °
- Loc. Source
- document
QA/QC
- QP Signed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-09T00:00:00.000Z
Reasoning: This intercept confirms the presence of the target lithology in a new exploration area, but its economic significance is unknown without assay results.
Positive factors
- Intercepted target lithology (graphitic black shale).
Negative factors
- No assay results reported.
Evidence · table
“10.55”
Context: 33.35
Tags used in scoring
No QA/QC Disclosurenegative
Release does not disclose QA/QC — lab certification, CP/QP sign-off and assay protocols cannot be checked from this document.
Why it applies: qaqc_disclosed is not true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
OST-26-004Alum Shale PropertiesIntercept: 40.8 mView all detailsHide details
Identity
- Hole ID
- OST-26-004
- Project
- Alum Shale Properties
- Region
- sweden
- Reported Region
- sweden
- Ticker
- DMX.V
Geometry
- Intercept
- 40.8 m
- From
- 43.9 m
- To
- 84.7 m
- Hole Depth
- 98.7 m
- Intercept Depth
- 33.35 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- OST-26-004:43.9-84.7
- Mining Method
- unknown
Location
- Location
- Österkälen nr 101
- Dip
- -90 °
- Loc. Source
- document
QA/QC
- QP Signed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-09T00:00:00.000Z
Reasoning: This intercept confirms the presence of the target lithology in a new exploration area, but its economic significance is unknown without assay results.
Positive factors
- Intercepted target lithology (grey-dark grey shale).
Negative factors
- No assay results reported.
Evidence · table
“40.80”
Context: 43.90
Tags used in scoring
No QA/QC Disclosurenegative
Release does not disclose QA/QC — lab certification, CP/QP sign-off and assay protocols cannot be checked from this document.
Why it applies: qaqc_disclosed is not true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
OST-26-005Alum Shale PropertiesIntercept: 5.15 mView all detailsHide details
Identity
- Hole ID
- OST-26-005
- Project
- Alum Shale Properties
- Region
- sweden
- Reported Region
- sweden
- Ticker
- DMX.V
Geometry
- Intercept
- 5.15 m
- From
- 47.1 m
- To
- 52.25 m
- Hole Depth
- 107.7 m
- Intercept Depth
- 47.1 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- OST-26-005:47.1-52.25
- Mining Method
- unknown
Location
- Location
- Österkälen nr 101
- Dip
- -90 °
- Loc. Source
- document
QA/QC
- QP Signed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-09T00:00:00.000Z
Reasoning: This intercept confirms the presence of the target lithology in a new exploration area, but its economic significance is unknown without assay results.
Positive factors
- Intercepted target lithology (graphitic black shale).
Negative factors
- No assay results reported.
Evidence · table
“5.15”
Context: 47.10
Tags used in scoring
No QA/QC Disclosurenegative
Release does not disclose QA/QC — lab certification, CP/QP sign-off and assay protocols cannot be checked from this document.
Why it applies: qaqc_disclosed is not true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
OST-26-005Alum Shale PropertiesIntercept: 45.3 mView all detailsHide details
Identity
- Hole ID
- OST-26-005
- Project
- Alum Shale Properties
- Region
- sweden
- Reported Region
- sweden
- Ticker
- DMX.V
Geometry
- Intercept
- 45.3 m
- From
- 52.25 m
- To
- 97.55 m
- Hole Depth
- 107.7 m
- Intercept Depth
- 47.1 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- OST-26-005:52.25-97.55
- Mining Method
- unknown
Location
- Location
- Österkälen nr 101
- Dip
- -90 °
- Loc. Source
- document
QA/QC
- QP Signed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-09T00:00:00.000Z
Reasoning: This intercept confirms the presence of the target lithology in a new exploration area, but its economic significance is unknown without assay results.
Positive factors
- Intercepted target lithology (grey-dark grey shale).
Negative factors
- No assay results reported.
Evidence · table
“45.30”
Context: 52.25
Tags used in scoring
No QA/QC Disclosurenegative
Release does not disclose QA/QC — lab certification, CP/QP sign-off and assay protocols cannot be checked from this document.
Why it applies: qaqc_disclosed is not true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
OST-26-006Alum Shale PropertiesIntercept: 9.8 mView all detailsHide details
Identity
- Hole ID
- OST-26-006
- Project
- Alum Shale Properties
- Region
- sweden
- Reported Region
- sweden
- Ticker
- DMX.V
Geometry
- Intercept
- 9.8 m
- From
- 43.1 m
- To
- 52.9 m
- Hole Depth
- 114 m
- Intercept Depth
- 43.1 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- OST-26-006:43.1-52.9
- Mining Method
- unknown
Location
- Location
- Österkälen nr 101
- Dip
- -90 °
- Loc. Source
- document
QA/QC
- QP Signed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-09T00:00:00.000Z
Reasoning: This intercept confirms the presence of the target lithology in a new exploration area, but its economic significance is unknown without assay results.
Positive factors
- Intercepted target lithology (graphitic black shale).
Negative factors
- No assay results reported.
Evidence · table
“9.80”
Context: 43.10
Tags used in scoring
No QA/QC Disclosurenegative
Release does not disclose QA/QC — lab certification, CP/QP sign-off and assay protocols cannot be checked from this document.
Why it applies: qaqc_disclosed is not true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
OST-26-006Alum Shale PropertiesIntercept: 49.2 mView all detailsHide details
Identity
- Hole ID
- OST-26-006
- Project
- Alum Shale Properties
- Region
- sweden
- Reported Region
- sweden
- Ticker
- DMX.V
Geometry
- Intercept
- 49.2 m
- From
- 52.9 m
- To
- 102.1 m
- Hole Depth
- 114 m
- Intercept Depth
- 43.1 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- OST-26-006:52.9-102.1
- Mining Method
- unknown
Location
- Location
- Österkälen nr 101
- Dip
- -90 °
- Loc. Source
- document
QA/QC
- QP Signed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-09T00:00:00.000Z
Reasoning: This intercept confirms the presence of the target lithology in a new exploration area, but its economic significance is unknown without assay results.
Positive factors
- Intercepted target lithology (grey-dark grey shale).
Negative factors
- No assay results reported.
Evidence · table
“49.20”
Context: 52.90
Tags used in scoring
No QA/QC Disclosurenegative
Release does not disclose QA/QC — lab certification, CP/QP sign-off and assay protocols cannot be checked from this document.
Why it applies: qaqc_disclosed is not true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
OST-26-007Alum Shale PropertiesIntercept: 14.4 mView all detailsHide details
Identity
- Hole ID
- OST-26-007
- Project
- Alum Shale Properties
- Region
- sweden
- Reported Region
- sweden
- Ticker
- DMX.V
Geometry
- Intercept
- 14.4 m
- From
- 37.7 m
- To
- 52.1 m
- Hole Depth
- 113.9 m
- Intercept Depth
- 37.7 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- OST-26-007:37.7-52.1
- Mining Method
- unknown
Location
- Location
- Österkälen nr 101
- Dip
- -90 °
- Loc. Source
- document
QA/QC
- QP Signed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-09T00:00:00.000Z
Reasoning: This intercept confirms the presence of the target lithology in a new exploration area, but its economic significance is unknown without assay results.
Positive factors
- Intercepted target lithology (graphitic black shale).
Negative factors
- No assay results reported.
Evidence · table
“14.40”
Context: 37.70
Tags used in scoring
No QA/QC Disclosurenegative
Release does not disclose QA/QC — lab certification, CP/QP sign-off and assay protocols cannot be checked from this document.
Why it applies: qaqc_disclosed is not true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
OST-26-007Alum Shale PropertiesIntercept: 50.35 mView all detailsHide details
Identity
- Hole ID
- OST-26-007
- Project
- Alum Shale Properties
- Region
- sweden
- Reported Region
- sweden
- Ticker
- DMX.V
Geometry
- Intercept
- 50.35 m
- From
- 52.1 m
- To
- 102.45 m
- Hole Depth
- 113.9 m
- Intercept Depth
- 37.7 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- OST-26-007:52.1-102.45
- Mining Method
- unknown
Location
- Location
- Österkälen nr 101
- Dip
- -90 °
- Loc. Source
- document
QA/QC
- QP Signed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-09T00:00:00.000Z
Reasoning: This intercept confirms the presence of the target lithology in a new exploration area, but its economic significance is unknown without assay results.
Positive factors
- Intercepted target lithology (grey-dark grey shale).
Negative factors
- No assay results reported.
Evidence · table
“50.35”
Context: 52.10
Tags used in scoring
No QA/QC Disclosurenegative
Release does not disclose QA/QC — lab certification, CP/QP sign-off and assay protocols cannot be checked from this document.
Why it applies: qaqc_disclosed is not true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
MAJ-26-001Alum Shale PropertiesIntercept: 6.1 mView all detailsHide details
Identity
- Hole ID
- MAJ-26-001
- Project
- Alum Shale Properties
- Region
- sweden
- Reported Region
- sweden
- Ticker
- DMX.V
Geometry
- Intercept
- 6.1 m
- From
- 38.7 m
- To
- 44.8 m
- Hole Depth
- 155.7 m
- Intercept Depth
- 38.7 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- MAJ-26-001:38.7-44.8
- Mining Method
- unknown
Location
- Location
- Malgomaj nr 1003
- Dip
- -90 °
- Loc. Source
- document
QA/QC
- QP Signed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-09T00:00:00.000Z
Reasoning: This intercept confirms the presence of the target lithology in a new exploration area, but its economic significance is unknown without assay results.
Positive factors
- Intercepted target lithology (graphitic black shale).
Negative factors
- No assay results reported.
Evidence · table
“6.10”
Context: 38.70
Tags used in scoring
No QA/QC Disclosurenegative
Release does not disclose QA/QC — lab certification, CP/QP sign-off and assay protocols cannot be checked from this document.
Why it applies: qaqc_disclosed is not true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
MAJ-26-001Alum Shale PropertiesIntercept: 3.7 mView all detailsHide details
Identity
- Hole ID
- MAJ-26-001
- Project
- Alum Shale Properties
- Region
- sweden
- Reported Region
- sweden
- Ticker
- DMX.V
Geometry
- Intercept
- 3.7 m
- From
- 47.3 m
- To
- 51 m
- Hole Depth
- 155.7 m
- Intercept Depth
- 38.7 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- MAJ-26-001:47.3-51
- Mining Method
- unknown
Location
- Location
- Malgomaj nr 1003
- Dip
- -90 °
- Loc. Source
- document
QA/QC
- QP Signed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-09T00:00:00.000Z
Reasoning: This intercept confirms the presence of the target lithology in a new exploration area, but its economic significance is unknown without assay results.
Positive factors
- Intercepted target lithology (graphitic black shale).
Negative factors
- No assay results reported.
Evidence · table
“3.70”
Context: 47.30
Tags used in scoring
No QA/QC Disclosurenegative
Release does not disclose QA/QC — lab certification, CP/QP sign-off and assay protocols cannot be checked from this document.
Why it applies: qaqc_disclosed is not true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
MAJ-26-001Alum Shale PropertiesIntercept: 68 mView all detailsHide details
Identity
- Hole ID
- MAJ-26-001
- Project
- Alum Shale Properties
- Region
- sweden
- Reported Region
- sweden
- Ticker
- DMX.V
Geometry
- Intercept
- 68 m
- From
- 51 m
- To
- 119 m
- Hole Depth
- 155.7 m
- Intercept Depth
- 38.7 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- MAJ-26-001:51-119
- Mining Method
- unknown
Location
- Location
- Malgomaj nr 1003
- Dip
- -90 °
- Loc. Source
- document
QA/QC
- QP Signed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-09T00:00:00.000Z
Reasoning: This intercept confirms the presence of the target lithology in a new exploration area, but its economic significance is unknown without assay results.
Positive factors
- Intercepted target lithology (grey-dark grey shale).
Negative factors
- No assay results reported.
Evidence · table
“68.00”
Context: 51.00
Tags used in scoring
No QA/QC Disclosurenegative
Release does not disclose QA/QC — lab certification, CP/QP sign-off and assay protocols cannot be checked from this document.
Why it applies: qaqc_disclosed is not true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
MAJ-26-001Alum Shale PropertiesIntercept: 9.7 mView all detailsHide details
Identity
- Hole ID
- MAJ-26-001
- Project
- Alum Shale Properties
- Region
- sweden
- Reported Region
- sweden
- Ticker
- DMX.V
Geometry
- Intercept
- 9.7 m
- From
- 119 m
- To
- 128.7 m
- Hole Depth
- 155.7 m
- Intercept Depth
- 38.7 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- MAJ-26-001:119-128.7
- Mining Method
- unknown
Location
- Location
- Malgomaj nr 1003
- Dip
- -90 °
- Loc. Source
- document
QA/QC
- QP Signed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-09T00:00:00.000Z
Reasoning: This intercept confirms the presence of the target lithology in a new exploration area, but its economic significance is unknown without assay results.
Positive factors
- Intercepted target lithology (graphitic black shale).
Negative factors
- No assay results reported.
Evidence · table
“9.70”
Context: 119.00
Tags used in scoring
No QA/QC Disclosurenegative
Release does not disclose QA/QC — lab certification, CP/QP sign-off and assay protocols cannot be checked from this document.
Why it applies: qaqc_disclosed is not true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
MAJ-26-002Alum Shale PropertiesIntercept: 17.4 mView all detailsHide details
Identity
- Hole ID
- MAJ-26-002
- Project
- Alum Shale Properties
- Region
- sweden
- Reported Region
- sweden
- Ticker
- DMX.V
Geometry
- Intercept
- 17.4 m
- From
- 14.6 m
- To
- 32 m
- Hole Depth
- 158.7 m
- Intercept Depth
- 14.6 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- MAJ-26-002:14.6-32
- Mining Method
- unknown
Location
- Location
- Malgomaj nr 1003
- Dip
- -90 °
- Loc. Source
- document
QA/QC
- QP Signed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-09T00:00:00.000Z
Reasoning: This intercept confirms the presence of the target lithology in a new exploration area, but its economic significance is unknown without assay results.
Positive factors
- Intercepted target lithology (graphitic black shale).
Negative factors
- No assay results reported.
Evidence · table
“17.40”
Context: 14.60
Tags used in scoring
No QA/QC Disclosurenegative
Release does not disclose QA/QC — lab certification, CP/QP sign-off and assay protocols cannot be checked from this document.
Why it applies: qaqc_disclosed is not true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
MAJ-26-002Alum Shale PropertiesIntercept: 75.75 mView all detailsHide details
Identity
- Hole ID
- MAJ-26-002
- Project
- Alum Shale Properties
- Region
- sweden
- Reported Region
- sweden
- Ticker
- DMX.V
Geometry
- Intercept
- 75.75 m
- From
- 49.65 m
- To
- 125.4 m
- Hole Depth
- 158.7 m
- Intercept Depth
- 14.6 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- MAJ-26-002:49.65-125.4
- Mining Method
- unknown
Location
- Location
- Malgomaj nr 1003
- Dip
- -90 °
- Loc. Source
- document
QA/QC
- QP Signed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-09T00:00:00.000Z
Reasoning: This intercept confirms the presence of the target lithology in a new exploration area, but its economic significance is unknown without assay results.
Positive factors
- Intercepted target lithology (grey-dark grey shale).
Negative factors
- No assay results reported.
Evidence · table
“75.75”
Context: 49.65
Tags used in scoring
No QA/QC Disclosurenegative
Release does not disclose QA/QC — lab certification, CP/QP sign-off and assay protocols cannot be checked from this document.
Why it applies: qaqc_disclosed is not true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
MAJ-26-002Alum Shale PropertiesIntercept: 10.5 mView all detailsHide details
Identity
- Hole ID
- MAJ-26-002
- Project
- Alum Shale Properties
- Region
- sweden
- Reported Region
- sweden
- Ticker
- DMX.V
Geometry
- Intercept
- 10.5 m
- From
- 125.4 m
- To
- 135.9 m
- Hole Depth
- 158.7 m
- Intercept Depth
- 14.6 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- MAJ-26-002:125.4-135.9
- Mining Method
- unknown
Location
- Location
- Malgomaj nr 1003
- Dip
- -90 °
- Loc. Source
- document
QA/QC
- QP Signed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-09T00:00:00.000Z
Reasoning: This intercept confirms the presence of the target lithology in a new exploration area, but its economic significance is unknown without assay results.
Positive factors
- Intercepted target lithology (graphitic black shale).
Negative factors
- No assay results reported.
Evidence · table
“10.50”
Context: 125.40
Tags used in scoring
No QA/QC Disclosurenegative
Release does not disclose QA/QC — lab certification, CP/QP sign-off and assay protocols cannot be checked from this document.
Why it applies: qaqc_disclosed is not true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
MAJ-26-002Alum Shale PropertiesIntercept: 5.9 mView all detailsHide details
Identity
- Hole ID
- MAJ-26-002
- Project
- Alum Shale Properties
- Region
- sweden
- Reported Region
- sweden
- Ticker
- DMX.V
Geometry
- Intercept
- 5.9 m
- From
- 135.9 m
- To
- 141.8 m
- Hole Depth
- 158.7 m
- Intercept Depth
- 14.6 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- MAJ-26-002:135.9-141.8
- Mining Method
- unknown
Location
- Location
- Malgomaj nr 1003
- Dip
- -90 °
- Loc. Source
- document
QA/QC
- QP Signed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-09T00:00:00.000Z
Reasoning: This intercept confirms the presence of the target lithology in a new exploration area, but its economic significance is unknown without assay results.
Positive factors
- Intercepted target lithology (grey-dark grey shale).
Negative factors
- No assay results reported.
Evidence · table
“5.90”
Context: 135.90
Tags used in scoring
No QA/QC Disclosurenegative
Release does not disclose QA/QC — lab certification, CP/QP sign-off and assay protocols cannot be checked from this document.
Why it applies: qaqc_disclosed is not true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
MAJ-26-003Alum Shale PropertiesIntercept: 19.85 mView all detailsHide details
Identity
- Hole ID
- MAJ-26-003
- Project
- Alum Shale Properties
- Region
- sweden
- Reported Region
- sweden
- Ticker
- DMX.V
Geometry
- Intercept
- 19.85 m
- From
- 4.5 m
- To
- 24.35 m
- Hole Depth
- 182.7 m
- Intercept Depth
- 4.5 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- MAJ-26-003:4.5-24.35
- Mining Method
- unknown
Location
- Location
- Malgomaj nr 1003
- Dip
- -90 °
- Loc. Source
- document
QA/QC
- QP Signed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-09T00:00:00.000Z
Reasoning: This intercept confirms the presence of the target lithology in a new exploration area, but its economic significance is unknown without assay results.
Positive factors
- Intercepted target lithology (graphitic black shale).
Negative factors
- No assay results reported.
Evidence · table
“19.85”
Context: 4.50
Tags used in scoring
No QA/QC Disclosurenegative
Release does not disclose QA/QC — lab certification, CP/QP sign-off and assay protocols cannot be checked from this document.
Why it applies: qaqc_disclosed is not true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
MAJ-26-003Alum Shale PropertiesIntercept: 16.3 mView all detailsHide details
Identity
- Hole ID
- MAJ-26-003
- Project
- Alum Shale Properties
- Region
- sweden
- Reported Region
- sweden
- Ticker
- DMX.V
Geometry
- Intercept
- 16.3 m
- From
- 24.35 m
- To
- 40.65 m
- Hole Depth
- 182.7 m
- Intercept Depth
- 4.5 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- MAJ-26-003:24.35-40.65
- Mining Method
- unknown
Location
- Location
- Malgomaj nr 1003
- Dip
- -90 °
- Loc. Source
- document
QA/QC
- QP Signed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-09T00:00:00.000Z
Reasoning: This intercept confirms the presence of the target lithology in a new exploration area, but its economic significance is unknown without assay results.
Positive factors
- Intercepted target lithology (grey-dark grey shale).
Negative factors
- No assay results reported.
Evidence · table
“16.30”
Context: 24.35
Tags used in scoring
No QA/QC Disclosurenegative
Release does not disclose QA/QC — lab certification, CP/QP sign-off and assay protocols cannot be checked from this document.
Why it applies: qaqc_disclosed is not true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
MAJ-26-003Alum Shale PropertiesIntercept: 98.4 mView all detailsHide details
Identity
- Hole ID
- MAJ-26-003
- Project
- Alum Shale Properties
- Region
- sweden
- Reported Region
- sweden
- Ticker
- DMX.V
Geometry
- Intercept
- 98.4 m
- From
- 55.8 m
- To
- 154.2 m
- Hole Depth
- 182.7 m
- Intercept Depth
- 4.5 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- MAJ-26-003:55.8-154.2
- Mining Method
- unknown
Location
- Location
- Malgomaj nr 1003
- Dip
- -90 °
- Loc. Source
- document
QA/QC
- QP Signed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-09T00:00:00.000Z
Reasoning: This intercept confirms the presence of the target lithology in a new exploration area, but its economic significance is unknown without assay results.
Positive factors
- Intercepted target lithology (grey-dark grey shale).
Negative factors
- No assay results reported.
Evidence · table
“98.40”
Context: 55.80
Tags used in scoring
No QA/QC Disclosurenegative
Release does not disclose QA/QC — lab certification, CP/QP sign-off and assay protocols cannot be checked from this document.
Why it applies: qaqc_disclosed is not true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
MAJ-26-003Alum Shale PropertiesIntercept: 6.65 mView all detailsHide details
Identity
- Hole ID
- MAJ-26-003
- Project
- Alum Shale Properties
- Region
- sweden
- Reported Region
- sweden
- Ticker
- DMX.V
Geometry
- Intercept
- 6.65 m
- From
- 154.2 m
- To
- 160.85 m
- Hole Depth
- 182.7 m
- Intercept Depth
- 4.5 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- MAJ-26-003:154.2-160.85
- Mining Method
- unknown
Location
- Location
- Malgomaj nr 1003
- Dip
- -90 °
- Loc. Source
- document
QA/QC
- QP Signed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-09T00:00:00.000Z
Reasoning: This intercept confirms the presence of the target lithology in a new exploration area, but its economic significance is unknown without assay results.
Positive factors
- Intercepted target lithology (graphitic black shale).
Negative factors
- No assay results reported.
Evidence · table
“6.65”
Context: 154.20
Tags used in scoring
No QA/QC Disclosurenegative
Release does not disclose QA/QC — lab certification, CP/QP sign-off and assay protocols cannot be checked from this document.
Why it applies: qaqc_disclosed is not true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
MAJ-26-004Alum Shale PropertiesIntercept: 2.25 mView all detailsHide details
Identity
- Hole ID
- MAJ-26-004
- Project
- Alum Shale Properties
- Region
- sweden
- Reported Region
- sweden
- Ticker
- DMX.V
Geometry
- Intercept
- 2.25 m
- From
- 31.4 m
- To
- 33.65 m
- Hole Depth
- 161.7 m
- Intercept Depth
- 31.4 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- MAJ-26-004:31.4-33.65
- Mining Method
- unknown
Location
- Location
- Malgomaj nr 1003
- Dip
- -90 °
- Loc. Source
- document
QA/QC
- QP Signed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-09T00:00:00.000Z
Reasoning: This intercept confirms the presence of the target lithology in a new exploration area, but its economic significance is unknown without assay results.
Positive factors
- Intercepted target lithology (graphitic black shale).
Negative factors
- No assay results reported.
Evidence · table
“2.25”
Context: 31.40
Tags used in scoring
No QA/QC Disclosurenegative
Release does not disclose QA/QC — lab certification, CP/QP sign-off and assay protocols cannot be checked from this document.
Why it applies: qaqc_disclosed is not true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
MAJ-26-004Alum Shale PropertiesIntercept: 101.25 mView all detailsHide details
Identity
- Hole ID
- MAJ-26-004
- Project
- Alum Shale Properties
- Region
- sweden
- Reported Region
- sweden
- Ticker
- DMX.V
Geometry
- Intercept
- 101.25 m
- From
- 33.65 m
- To
- 134.9 m
- Hole Depth
- 161.7 m
- Intercept Depth
- 31.4 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- MAJ-26-004:33.65-134.9
- Mining Method
- unknown
Location
- Location
- Malgomaj nr 1003
- Dip
- -90 °
- Loc. Source
- document
QA/QC
- QP Signed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-09T00:00:00.000Z
Reasoning: This intercept confirms the presence of the target lithology in a new exploration area, but its economic significance is unknown without assay results.
Positive factors
- Intercepted target lithology (grey-dark grey shale).
Negative factors
- No assay results reported.
Evidence · table
“101.25”
Context: 33.65
Tags used in scoring
No QA/QC Disclosurenegative
Release does not disclose QA/QC — lab certification, CP/QP sign-off and assay protocols cannot be checked from this document.
Why it applies: qaqc_disclosed is not true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
MAJ-26-004Alum Shale PropertiesIntercept: 7.3 mView all detailsHide details
Identity
- Hole ID
- MAJ-26-004
- Project
- Alum Shale Properties
- Region
- sweden
- Reported Region
- sweden
- Ticker
- DMX.V
Geometry
- Intercept
- 7.3 m
- From
- 134.9 m
- To
- 142.2 m
- Hole Depth
- 161.7 m
- Intercept Depth
- 31.4 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- MAJ-26-004:134.9-142.2
- Mining Method
- unknown
Location
- Location
- Malgomaj nr 1003
- Dip
- -90 °
- Loc. Source
- document
QA/QC
- QP Signed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-09T00:00:00.000Z
Reasoning: This intercept confirms the presence of the target lithology in a new exploration area, but its economic significance is unknown without assay results.
Positive factors
- Intercepted target lithology (graphitic black shale).
Negative factors
- No assay results reported.
Evidence · table
“7.30”
Context: 134.90
Tags used in scoring
No QA/QC Disclosurenegative
Release does not disclose QA/QC — lab certification, CP/QP sign-off and assay protocols cannot be checked from this document.
Why it applies: qaqc_disclosed is not true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
MAJ-26-007Alum Shale PropertiesIntercept: 56.75 mView all detailsHide details
Identity
- Hole ID
- MAJ-26-007
- Project
- Alum Shale Properties
- Region
- sweden
- Reported Region
- sweden
- Ticker
- DMX.V
Geometry
- Intercept
- 56.75 m
- From
- 11.8 m
- To
- 68.55 m
- Hole Depth
- 107.6 m
- Intercept Depth
- 11.8 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- MAJ-26-007:11.8-68.55
- Mining Method
- unknown
Location
- Location
- Malgomaj nr 1002
- Dip
- -90 °
- Loc. Source
- document
QA/QC
- QP Signed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-09T00:00:00.000Z
Reasoning: This intercept confirms the presence of the target lithology in a new exploration area, but its economic significance is unknown without assay results.
Positive factors
- Intercepted target lithology (graphitic black shale).
Negative factors
- No assay results reported.
Evidence · table
“56.75”
Context: 11.80
Tags used in scoring
No QA/QC Disclosurenegative
Release does not disclose QA/QC — lab certification, CP/QP sign-off and assay protocols cannot be checked from this document.
Why it applies: qaqc_disclosed is not true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
MAJ-26-007Alum Shale PropertiesIntercept: 23.25 mView all detailsHide details
Identity
- Hole ID
- MAJ-26-007
- Project
- Alum Shale Properties
- Region
- sweden
- Reported Region
- sweden
- Ticker
- DMX.V
Geometry
- Intercept
- 23.25 m
- From
- 68.55 m
- To
- 91.8 m
- Hole Depth
- 107.6 m
- Intercept Depth
- 11.8 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- MAJ-26-007:68.55-91.8
- Mining Method
- unknown
Location
- Location
- Malgomaj nr 1002
- Dip
- -90 °
- Loc. Source
- document
QA/QC
- QP Signed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-09T00:00:00.000Z
Reasoning: This intercept confirms the presence of the target lithology in a new exploration area, but its economic significance is unknown without assay results.
Positive factors
- Intercepted target lithology (graphitic black shale).
Negative factors
- No assay results reported.
Evidence · table
“23.25”
Context: 68.55
Tags used in scoring
No QA/QC Disclosurenegative
Release does not disclose QA/QC — lab certification, CP/QP sign-off and assay protocols cannot be checked from this document.
Why it applies: qaqc_disclosed is not true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
MAJ-26-007Alum Shale PropertiesIntercept: 5.9 mView all detailsHide details
Identity
- Hole ID
- MAJ-26-007
- Project
- Alum Shale Properties
- Region
- sweden
- Reported Region
- sweden
- Ticker
- DMX.V
Geometry
- Intercept
- 5.9 m
- From
- 91.8 m
- To
- 97.7 m
- Hole Depth
- 107.6 m
- Intercept Depth
- 11.8 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- MAJ-26-007:91.8-97.7
- Mining Method
- unknown
Location
- Location
- Malgomaj nr 1002
- Dip
- -90 °
- Loc. Source
- document
QA/QC
- QP Signed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-09T00:00:00.000Z
Reasoning: This intercept confirms the presence of the target lithology in a new exploration area, but its economic significance is unknown without assay results.
Positive factors
- Intercepted target lithology (grey-dark grey shale).
Negative factors
- No assay results reported.
Evidence · table
“5.90”
Context: 91.80
Tags used in scoring
No QA/QC Disclosurenegative
Release does not disclose QA/QC — lab certification, CP/QP sign-off and assay protocols cannot be checked from this document.
Why it applies: qaqc_disclosed is not true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
MAJ-26-009Alum Shale PropertiesIntercept: 79.4 mView all detailsHide details
Identity
- Hole ID
- MAJ-26-009
- Project
- Alum Shale Properties
- Region
- sweden
- Reported Region
- sweden
- Ticker
- DMX.V
Geometry
- Intercept
- 79.4 m
- From
- 15.4 m
- To
- 94.8 m
- Hole Depth
- 131.8 m
- Intercept Depth
- 15.4 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- MAJ-26-009:15.4-94.8
- Mining Method
- unknown
Location
- Location
- Malgomaj nr 1002
- Dip
- -90 °
- Loc. Source
- document
QA/QC
- QP Signed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-09T00:00:00.000Z
Reasoning: This intercept confirms the presence of the target lithology in a new exploration area, but its economic significance is unknown without assay results.
Positive factors
- Intercepted target lithology (graphitic black shale).
Negative factors
- No assay results reported.
Evidence · table
“79.40”
Context: 15.40
Tags used in scoring
No QA/QC Disclosurenegative
Release does not disclose QA/QC — lab certification, CP/QP sign-off and assay protocols cannot be checked from this document.
Why it applies: qaqc_disclosed is not true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
MAJ-26-010Alum Shale PropertiesIntercept: 38 mView all detailsHide details
Identity
- Hole ID
- MAJ-26-010
- Project
- Alum Shale Properties
- Region
- sweden
- Reported Region
- sweden
- Ticker
- DMX.V
Geometry
- Intercept
- 38 m
- From
- 15.5 m
- To
- 53.5 m
- Hole Depth
- 143.9 m
- Intercept Depth
- 15.5 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- MAJ-26-010:15.5-53.5
- Mining Method
- unknown
Location
- Location
- Malgomaj nr 1002
- Dip
- -90 °
- Loc. Source
- document
QA/QC
- QP Signed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-09T00:00:00.000Z
Reasoning: This intercept confirms the presence of the target lithology in a new exploration area, but its economic significance is unknown without assay results.
Positive factors
- Intercepted target lithology (graphitic black shale).
Negative factors
- No assay results reported.
Evidence · table
“38.00”
Context: 15.50
Tags used in scoring
No QA/QC Disclosurenegative
Release does not disclose QA/QC — lab certification, CP/QP sign-off and assay protocols cannot be checked from this document.
Why it applies: qaqc_disclosed is not true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
MAJ-26-010Alum Shale PropertiesIntercept: 21.1 mView all detailsHide details
Identity
- Hole ID
- MAJ-26-010
- Project
- Alum Shale Properties
- Region
- sweden
- Reported Region
- sweden
- Ticker
- DMX.V
Geometry
- Intercept
- 21.1 m
- From
- 57.9 m
- To
- 79 m
- Hole Depth
- 143.9 m
- Intercept Depth
- 15.5 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- MAJ-26-010:57.9-79
- Mining Method
- unknown
Location
- Location
- Malgomaj nr 1002
- Dip
- -90 °
- Loc. Source
- document
QA/QC
- QP Signed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-09T00:00:00.000Z
Reasoning: This intercept confirms the presence of the target lithology in a new exploration area, but its economic significance is unknown without assay results.
Positive factors
- Intercepted target lithology (graphitic black shale).
Negative factors
- No assay results reported.
Evidence · table
“21.10”
Context: 57.90
Tags used in scoring
No QA/QC Disclosurenegative
Release does not disclose QA/QC — lab certification, CP/QP sign-off and assay protocols cannot be checked from this document.
Why it applies: qaqc_disclosed is not true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
MAJ-26-010Alum Shale PropertiesIntercept: 34 mView all detailsHide details
Identity
- Hole ID
- MAJ-26-010
- Project
- Alum Shale Properties
- Region
- sweden
- Reported Region
- sweden
- Ticker
- DMX.V
Geometry
- Intercept
- 34 m
- From
- 79 m
- To
- 113 m
- Hole Depth
- 143.9 m
- Intercept Depth
- 15.5 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- MAJ-26-010:79-113
- Mining Method
- unknown
Location
- Location
- Malgomaj nr 1002
- Dip
- -90 °
- Loc. Source
- document
QA/QC
- QP Signed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-09T00:00:00.000Z
Reasoning: This intercept confirms the presence of the target lithology in a new exploration area, but its economic significance is unknown without assay results.
Positive factors
- Intercepted target lithology (grey-dark grey shale).
Negative factors
- No assay results reported.
Evidence · table
“34.00”
Context: 79.00
Tags used in scoring
No QA/QC Disclosurenegative
Release does not disclose QA/QC — lab certification, CP/QP sign-off and assay protocols cannot be checked from this document.
Why it applies: qaqc_disclosed is not true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
MAJ-26-011Alum Shale PropertiesIntercept: 52.8 mView all detailsHide details
Identity
- Hole ID
- MAJ-26-011
- Project
- Alum Shale Properties
- Region
- sweden
- Reported Region
- sweden
- Ticker
- DMX.V
Geometry
- Intercept
- 52.8 m
- From
- 10 m
- To
- 62.8 m
- Hole Depth
- 113.8 m
- Intercept Depth
- 10 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- MAJ-26-011:10-62.8
- Mining Method
- unknown
Location
- Location
- Malgomaj nr 1002
- Dip
- -90 °
- Loc. Source
- document
QA/QC
- QP Signed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-09T00:00:00.000Z
Reasoning: This intercept confirms the presence of the target lithology in a new exploration area, but its economic significance is unknown without assay results.
Positive factors
- Intercepted target lithology (graphitic black shale).
Negative factors
- No assay results reported.
Evidence · table
“52.80”
Context: 10.00
Tags used in scoring
No QA/QC Disclosurenegative
Release does not disclose QA/QC — lab certification, CP/QP sign-off and assay protocols cannot be checked from this document.
Why it applies: qaqc_disclosed is not true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
MAJ-26-011Alum Shale PropertiesIntercept: 33.8 mView all detailsHide details
Identity
- Hole ID
- MAJ-26-011
- Project
- Alum Shale Properties
- Region
- sweden
- Reported Region
- sweden
- Ticker
- DMX.V
Geometry
- Intercept
- 33.8 m
- From
- 62.8 m
- To
- 96.6 m
- Hole Depth
- 113.8 m
- Intercept Depth
- 10 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- MAJ-26-011:62.8-96.6
- Mining Method
- unknown
Location
- Location
- Malgomaj nr 1002
- Dip
- -90 °
- Loc. Source
- document
QA/QC
- QP Signed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-09T00:00:00.000Z
Reasoning: This intercept confirms the presence of the target lithology in a new exploration area, but its economic significance is unknown without assay results.
Positive factors
- Intercepted target lithology (grey-dark grey shale).
Negative factors
- No assay results reported.
Evidence · table
“33.80”
Context: 62.80
Tags used in scoring
No QA/QC Disclosurenegative
Release does not disclose QA/QC — lab certification, CP/QP sign-off and assay protocols cannot be checked from this document.
Why it applies: qaqc_disclosed is not true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
How Atlas produces this analysis
Minestarters Atlas uses automated extraction to summarize mining announcements, identify reported measurements, and classify supporting evidence. Sentiment reflects the extracted narrative and classification rules; it is an interpretation, not a reported measurement. Evidence quotes and context are provided where available. Missing data, low-confidence results, and review flags indicate limitations. Check the original publisher announcement before relying on an interpretation.