Cartier Cuts 7.9 g/t Au Over 4.0 m Within A Broader Segment of 2.3 g/t Au Over 19.0 m at Hope Sector (Cadillac); Unlocks New High-Grade Gold Zone in Underexplored Pontiac Sediments

Evidence · text

“Quality Assurance and Quality Control (QA/QC) Program The drill core from the Cadillac Project is NQ-size and, upon receipt from the drill rig, is described and sampled by Cartier geologists. Core is sawn in half, with one half labelled, bagged and submitted for analysis and the other half retained and stored at Cartier’s coreshack facilities located in Val-d’Or, Quebec, for future reference and verification. As part of Quality Assurance and Quality Control (QA/QC) program, Cartier inserts blank samples and certified reference materials (standards) at regular intervals into the sample stream prior to shipment to monitor laboratory performance and analytical accuracy. Drill core samples are sent to MSALABS's analytical laboratory located in Val-d’Or, Quebec, for preparation and gold analysis. The entire sample is dried and crushed (70% passing a 2-millimeter sieve). The analysis for gold is performed on an approximately 500 g aliquot using Chrysos Photon Assay™ technology, which uses high-energy X-ray excitation with gamma detection to quickly and non-destructively measure gold content. Alternatively, samples are submitted to Activation Laboratories Ltd. ("Actlabs"), located in either Val-d’Or or Ste-Germaine-Boulé, both in Quebec, for preparation and gold analysis. The entire sample is dried, crushed (90% passing a 2-millimetre sieve) and 250 g is pulverized (90% passing a 0.07-millimetre sieve). The analysis for gold is conducted using a 50 g fire assay fusion with atomic absorption spectroscopy (AAS) finish, with a detection limit up to 10,000 ppb. Samples exceeding this threshold are reanalyzed by fire assay with a gravimetric finish to determine high-grade values accurately. Both MSALABS and Actlabs are ISO/IEC 17025 accredited for gold assays and implement industry-standard QA/QC protocols. Their internal quality control programs include the use of blanks, duplicates, and certified reference materials at set intervals, with established acceptance criteria to ensure data integrity and analytical precision. Qualified Person The scientific and technical content of this press release has been prepared, reviewed and approved by Mr. Ronan Déroff, P.Geo., M.Sc., Vice President Exploration, who is a ″ Qualified Person ″ as defined by National Instrument 43-101 – Standards of Disclosure for Mineral Projects (″ NI 43-101 ″).”

Evidence · text

“Hole CA26-591 introduces a new high-grade gold zone near surface in the unexplored Pontiac sediments . ... Drill holes CA26-334 and 335 intersected the Porphyry #1 intrusion , extending its westward dimension to at least 1 km in length”

Evidence · table

“22.0”

Context: 1.0

Evidence · text

“Based on the observed intercept angles within the drill core, true thicknesses are estimated to represent approximately 60-90% of the reported core length intervals.”