Cambria Gold Mines Announces 166.2 g/t Au and 3,383 g/t Ag over 3.1 Meters at Premier and Expanded Drilling Program
Original announcement by orestocks on
- Company
- Cambria Gold Mines Inc.
- Ticker
- CAMB.V
- Exchange
- Unavailable
- Region
- British Columbia
- Primary commodity
- Gold
- Secondary commodities
- Silver, Zinc, Lead
- Document categories
- Drill results
- Extracted
- 2026-09-22 12:29:41 UTC
Analysis by Minestarters Atlas
Atlas analysis published:
Minestarters Atlas analysis
Summary
Cambria Gold Mines announced exceptional assay results from its infill drilling program at the Premier Gold Project in British Columbia, including 166.2 g/t Au and 3,383 g/t Ag over 3.1 meters. The company is expanding its 42,000-meter infill program, targeting both high-grade and potentially bulk-mineable mineralization, with initial results from the Silver Coin deposit expected in October 2026. These results confirm strong continuity of high-grade gold and silver and indicate significant potential for resource expansion and new discoveries.
Reasoning: The announcement reports multiple high-grade gold and silver intercepts, including bonanza grades, from an infill drilling program at the Premier Gold Project. The program is being expanded, indicating strong potential and continuity of mineralization. Detailed QA/QC and compositing parameters are disclosed, enhancing confidence in the results, although specific true width values are not provided.
Positive factors
- Exceptional gold and silver grades, including bonanza intercepts, demonstrate high-grade mineralization.
- Strong continuity of mineralization confirmed by infill drilling.
- Expanded drilling program indicates confidence in resource growth and potential for new discoveries.
- Detailed QA/QC procedures and QP sign-off enhance data credibility.
- Clear disclosure of compositing parameters (cut-off grade and internal dilution).
Negative factors
- True width is estimated as a percentage range rather than a specific value, which introduces some uncertainty.
Facts used in scoring: 55
Extracted facts
Stored fact records: 55. Some facts used in scoring do not have a stored record.
Drill Results (55)
P26U-0095Premier · goldGrade: 166.22Grade Unit: g/tIntercept: 3.1 mView all detailsHide details
Identity
- Hole ID
- P26U-0095
- Project
- Premier
- Commodity
- gold
- Region
- canada_bc
- Reported Region
- canada_bc
- Ticker
- CAMB.V
Geometry
- Grade
- 166.22
- Grade Unit
- g/t
- Intercept
- 3.1 m
- From
- 13.9 m
- To
- 17 m
- Hole Depth
- 46 m
- Intercept Depth
- 13.9 m
Classification
- Program
- mixed
- Sample Type
- drill
- Group ID
- P26U-0095:13.9-17
- Mining Method
- underground
Location
- Easting
- 437253
- Northing
- 6213095
- Elevation
- 346 m
- Azimuth
- 135 °
- Dip
- 8 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Canada Ltd.
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Compositing
- Cutoff Grade
- 1
- Cutoff Unit
- g/t Au
- Max Dilution
- 3 m
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-22T00:00:00.000Z
Reasoning: This intercept shows bonanza grades for both gold and silver over a moderate width, making it an exceptionally strong result that confirms high-grade continuity within the deposit.
Positive factors
- Exceptional gold grade (166.22 g/t Au) significantly exceeds the underground exceptional threshold (15 g/t Au).
- High silver grade (3383 g/t Ag) is well above the exceptional threshold (500 g/t Ag).
- Significant grade-thickness product (515.28 g/t Au·m) indicates a bonanza intercept.
- Part of an expanded infill drilling program, confirming continuity of high-grade mineralization.
Negative factors
- True width is estimated as a percentage range rather than a specific value.
Tags used in scoring
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: The document explicitly states that the results are from an 'ongoing infill drilling program'.
Evidence · text
“ongoing infill drilling program”
Rejected tags
Rejected tags — excluded from scoring because their label or evidence could not be verified.
Bonanza InterceptRejected · positive
Exceptionally high-grade zone, well above the deposit-type norm.
Reason: The gold grade of 166.22 g/t and silver grade of 3383 g/t are exceptionally high, well above the defined thresholds for bonanza grades in an underground setting.
Evidence · text
“166.22 g/t Au and 3383 g/t Ag over 3.1 m”
QA/QC DisclosedRejected · positive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Reason: The release includes a detailed section on QA/QC procedures, including certified labs, blanks, standards, and duplicates.
Evidence · text
“The Company maintains a rigorous sampling and QA/QC procedure for the 2026 drill program.”
Compositing TransparentRejected · positive
Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Reason: The cut-off grade of 1 g/t Au and maximum 3 metre internal waste for compositing are clearly stated.
Evidence · text
“Composites for significant intersections were calculated using a 1 g/t gold (Au) cut off grade and maximum 3 metre internal waste.”
Apparent Width OnlyRejected · negative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Reason: The document states 'All reported intervals are down-hole lengths, with true width estimates ranging from 50-99% of the reported interval', indicating a specific true width is not provided.
Evidence · text
“All reported intervals are down-hole lengths, with true width estimates ranging from 50-99% of the reported interval.”
P26U-0095Premier · silverGrade: 3383Grade Unit: g/tIntercept: 3.1 mView all detailsHide details
Identity
- Hole ID
- P26U-0095
- Project
- Premier
- Commodity
- silver
- Region
- canada_bc
- Reported Region
- canada_bc
- Ticker
- CAMB.V
Geometry
- Grade
- 3383
- Grade Unit
- g/t
- Intercept
- 3.1 m
- From
- 13.9 m
- To
- 17 m
- Hole Depth
- 46 m
- Intercept Depth
- 13.9 m
Classification
- Program
- mixed
- Sample Type
- drill
- Group ID
- P26U-0095:13.9-17
- Mining Method
- underground
Location
- Easting
- 437253
- Northing
- 6213095
- Elevation
- 346 m
- Azimuth
- 135 °
- Dip
- 8 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Canada Ltd.
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Compositing
- Cutoff Grade
- 1
- Cutoff Unit
- g/t Au
- Max Dilution
- 3 m
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-22T00:00:00.000Z
Reasoning: This intercept shows bonanza grades for both silver and gold over a moderate width, making it an exceptionally strong result that confirms high-grade continuity within the deposit.
Positive factors
- Exceptional silver grade (3383 g/t Ag) significantly exceeds the exceptional threshold (500 g/t Ag).
- High gold grade (166.22 g/t Au) is well above the underground exceptional threshold (15 g/t Au).
- Significant grade-thickness product (10487.3 g/t Ag·m) indicates a bonanza intercept.
- Part of an expanded infill drilling program, confirming continuity of high-grade mineralization.
Negative factors
- True width is estimated as a percentage range rather than a specific value.
Tags used in scoring
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: The document explicitly states that the results are from an 'ongoing infill drilling program'.
Evidence · text
“ongoing infill drilling program”
Rejected tags
Rejected tags — excluded from scoring because their label or evidence could not be verified.
Bonanza InterceptRejected · positive
Exceptionally high-grade zone, well above the deposit-type norm.
Reason: The silver grade of 3383 g/t and gold grade of 166.22 g/t are exceptionally high, well above the defined thresholds for bonanza grades.
Evidence · text
“166.22 g/t Au and 3383 g/t Ag over 3.1 m”
QA/QC DisclosedRejected · positive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Reason: The release includes a detailed section on QA/QC procedures, including certified labs, blanks, standards, and duplicates.
Evidence · text
“The Company maintains a rigorous sampling and QA/QC procedure for the 2026 drill program.”
Compositing TransparentRejected · positive
Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Reason: The cut-off grade of 1 g/t Au and maximum 3 metre internal waste for compositing are clearly stated.
Evidence · text
“Composites for significant intersections were calculated using a 1 g/t gold (Au) cut off grade and maximum 3 metre internal waste.”
Apparent Width OnlyRejected · negative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Reason: The document states 'All reported intervals are down-hole lengths, with true width estimates ranging from 50-99% of the reported interval', indicating a specific true width is not provided.
Evidence · text
“All reported intervals are down-hole lengths, with true width estimates ranging from 50-99% of the reported interval.”
P26U-0095Premier · goldGrade: 467Grade Unit: g/tIntercept: 1.1 mView all detailsHide details
Identity
- Hole ID
- P26U-0095
- Project
- Premier
- Commodity
- gold
- Region
- canada_bc
- Reported Region
- canada_bc
- Ticker
- CAMB.V
Geometry
- Grade
- 467
- Grade Unit
- g/t
- Intercept
- 1.1 m
- Hole Depth
- 46 m
Classification
- Program
- mixed
- Sample Type
- drill
- Group ID
- P26U-0095:13.9-17.0
- Mining Method
- underground
Location
- Easting
- 437253
- Northing
- 6213095
- Elevation
- 346 m
- Azimuth
- 135 °
- Dip
- 8 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Canada Ltd.
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Compositing
- Cutoff Grade
- 10
- Cutoff Unit
- g/t Au
- Max Dilution
- 3 m
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-22T00:00:00.000Z
Reasoning: This sub-interval represents an extremely high-grade bonanza intercept for both gold and silver, highlighting the presence of very rich mineralization within the broader interval.
Positive factors
- Exceptional gold grade (467 g/t Au) significantly exceeds the underground exceptional threshold (15 g/t Au).
- High silver grade (9510 g/t Ag) is well above the exceptional threshold (500 g/t Ag).
- Significant grade-thickness product (513.7 g/t Au·m) indicates a bonanza intercept.
- This is a high-grade sub-interval within a broader significant intercept, indicating very rich mineralization.
Negative factors
- True width is estimated as a percentage range rather than a specific value.
Tags used in scoring
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: The document explicitly states that the results are from an 'ongoing infill drilling program'.
Evidence · text
“ongoing infill drilling program”
Rejected tags
Rejected tags — excluded from scoring because their label or evidence could not be verified.
Bonanza InterceptRejected · positive
Exceptionally high-grade zone, well above the deposit-type norm.
Reason: The gold grade of 467 g/t and silver grade of 9510 g/t are exceptionally high, well above the defined thresholds for bonanza grades in an underground setting.
Evidence · text
“467 g/t Au & 9510 g/t Ag over 1.1 m”
QA/QC DisclosedRejected · positive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Reason: The release includes a detailed section on QA/QC procedures, including certified labs, blanks, standards, and duplicates.
Evidence · text
“The Company maintains a rigorous sampling and QA/QC procedure for the 2026 drill program.”
Compositing TransparentRejected · positive
Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Reason: The cut-off grade of 10 g/t Au and maximum 3 metre internal waste for compositing are clearly stated for 'including' intervals.
Evidence · text
““Including” results are reported at a 10 g/t Au cut off grade with maximum 3 metre internal waste.”
Apparent Width OnlyRejected · negative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Reason: The document states 'All reported intervals are down-hole lengths, with true width estimates ranging from 50-99% of the reported interval', indicating a specific true width is not provided.
Evidence · text
“All reported intervals are down-hole lengths, with true width estimates ranging from 50-99% of the reported interval.”
P26U-0095Premier · silverGrade: 9510Grade Unit: g/tIntercept: 1.1 mView all detailsHide details
Identity
- Hole ID
- P26U-0095
- Project
- Premier
- Commodity
- silver
- Region
- canada_bc
- Reported Region
- canada_bc
- Ticker
- CAMB.V
Geometry
- Grade
- 9510
- Grade Unit
- g/t
- Intercept
- 1.1 m
- Hole Depth
- 46 m
Classification
- Program
- mixed
- Sample Type
- drill
- Group ID
- P26U-0095:13.9-17.0
- Mining Method
- underground
Location
- Easting
- 437253
- Northing
- 6213095
- Elevation
- 346 m
- Azimuth
- 135 °
- Dip
- 8 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Canada Ltd.
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Compositing
- Cutoff Grade
- 10
- Cutoff Unit
- g/t Au
- Max Dilution
- 3 m
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-22T00:00:00.000Z
Reasoning: This sub-interval represents an extremely high-grade bonanza intercept for both silver and gold, highlighting the presence of very rich mineralization within the broader interval.
Positive factors
- Exceptional silver grade (9510 g/t Ag) significantly exceeds the exceptional threshold (500 g/t Ag).
- High gold grade (467 g/t Au) is well above the underground exceptional threshold (15 g/t Au).
- Significant grade-thickness product (10461 g/t Ag·m) indicates a bonanza intercept.
- This is a high-grade sub-interval within a broader significant intercept, indicating very rich mineralization.
Negative factors
- True width is estimated as a percentage range rather than a specific value.
Tags used in scoring
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: The document explicitly states that the results are from an 'ongoing infill drilling program'.
Evidence · text
“ongoing infill drilling program”
Rejected tags
Rejected tags — excluded from scoring because their label or evidence could not be verified.
Bonanza InterceptRejected · positive
Exceptionally high-grade zone, well above the deposit-type norm.
Reason: The silver grade of 9510 g/t and gold grade of 467 g/t are exceptionally high, well above the defined thresholds for bonanza grades.
Evidence · text
“467 g/t Au & 9510 g/t Ag over 1.1 m”
QA/QC DisclosedRejected · positive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Reason: The release includes a detailed section on QA/QC procedures, including certified labs, blanks, standards, and duplicates.
Evidence · text
“The Company maintains a rigorous sampling and QA/QC procedure for the 2026 drill program.”
Compositing TransparentRejected · positive
Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Reason: The cut-off grade of 10 g/t Au and maximum 3 metre internal waste for compositing are clearly stated for 'including' intervals.
Evidence · text
““Including” results are reported at a 10 g/t Au cut off grade with maximum 3 metre internal waste.”
Apparent Width OnlyRejected · negative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Reason: The document states 'All reported intervals are down-hole lengths, with true width estimates ranging from 50-99% of the reported interval', indicating a specific true width is not provided.
Evidence · text
“All reported intervals are down-hole lengths, with true width estimates ranging from 50-99% of the reported interval.”
P26-2705Premier · goldGrade: 18.26Grade Unit: g/tIntercept: 9.2 mView all detailsHide details
Identity
- Hole ID
- P26-2705
- Project
- Premier
- Commodity
- gold
- Region
- canada_bc
- Reported Region
- canada_bc
- Ticker
- CAMB.V
Geometry
- Grade
- 18.26
- Grade Unit
- g/t
- Intercept
- 9.2 m
- From
- 267.2 m
- To
- 276.4 m
- Hole Depth
- 338 m
- Intercept Depth
- 267.2 m
Classification
- Program
- mixed
- Sample Type
- drill
- Group ID
- P26-2705:267.2-276.4
- Mining Method
- underground
Location
- Easting
- 436832
- Northing
- 6212647
- Elevation
- 555 m
- Azimuth
- 164 °
- Dip
- 67 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Canada Ltd.
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Compositing
- Cutoff Grade
- 1
- Cutoff Unit
- g/t Au
- Max Dilution
- 3 m
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-22T00:00:00.000Z
Reasoning: This intercept shows exceptional gold grades over a strong width, extending mineralization beyond historic workings, which is a very positive indicator for resource expansion.
Positive factors
- Exceptional gold grade (18.26 g/t Au) exceeds the underground exceptional threshold (15 g/t Au).
- Strong intercept length (9.2 m) indicates good continuity.
- Significant grade-thickness product (167.99 g/t Au·m) is a strong result.
- The intercept extends mineralization 10 meters beyond historic workings, indicating potential for expansion.
Negative factors
- True width is estimated as a percentage range rather than a specific value.
Tags used in scoring
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: The document explicitly states that the results are from an 'ongoing infill drilling program'.
Evidence · text
“ongoing infill drilling program”
Rejected tags
Rejected tags — excluded from scoring because their label or evidence could not be verified.
Bonanza InterceptRejected · positive
Exceptionally high-grade zone, well above the deposit-type norm.
Reason: The gold grade of 18.26 g/t exceeds the underground exceptional threshold of 15 g/t Au.
Evidence · text
“18.26 g/t Au and 34 g/t Ag over 9.2 m”
Step-Out ExtensionRejected · positive
Mineralization extended beyond the previously known limit.
Reason: The intercept is described as 'ten metres beyond the end of the historic workings', indicating an extension of known mineralization.
Evidence · text
“ten metres beyond the end of the historic workings”
QA/QC DisclosedRejected · positive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Reason: The release includes a detailed section on QA/QC procedures, including certified labs, blanks, standards, and duplicates.
Evidence · text
“The Company maintains a rigorous sampling and QA/QC procedure for the 2026 drill program.”
Compositing TransparentRejected · positive
Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Reason: The cut-off grade of 1 g/t Au and maximum 3 metre internal waste for compositing are clearly stated.
Evidence · text
“Composites for significant intersections were calculated using a 1 g/t gold (Au) cut off grade and maximum 3 metre internal waste.”
Apparent Width OnlyRejected · negative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Reason: The document states 'All reported intervals are down-hole lengths, with true width estimates ranging from 50-99% of the reported interval', indicating a specific true width is not provided.
Evidence · text
“All reported intervals are down-hole lengths, with true width estimates ranging from 50-99% of the reported interval.”
P26-2705Premier · silverGrade: 34Grade Unit: g/tIntercept: 9.2 mView all detailsHide details
Identity
- Hole ID
- P26-2705
- Project
- Premier
- Commodity
- silver
- Region
- canada_bc
- Reported Region
- canada_bc
- Ticker
- CAMB.V
Geometry
- Grade
- 34
- Grade Unit
- g/t
- Intercept
- 9.2 m
- From
- 267.2 m
- To
- 276.4 m
- Hole Depth
- 338 m
- Intercept Depth
- 267.2 m
Classification
- Program
- mixed
- Sample Type
- drill
- Group ID
- P26-2705:267.2-276.4
- Mining Method
- underground
Location
- Easting
- 436832
- Northing
- 6212647
- Elevation
- 555 m
- Azimuth
- 164 °
- Dip
- 67 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Canada Ltd.
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Compositing
- Cutoff Grade
- 1
- Cutoff Unit
- g/t Au
- Max Dilution
- 3 m
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-22T00:00:00.000Z
Reasoning: This intercept shows moderate silver grades over a strong width, contributing to the overall positive results and extending mineralization beyond historic workings.
Positive factors
- Moderate silver grade (34 g/t Ag) exceeds the weak threshold (30 g/t Ag).
- Strong intercept length (9.2 m) indicates good continuity.
- The intercept extends mineralization 10 meters beyond historic workings, indicating potential for expansion.
Negative factors
- True width is estimated as a percentage range rather than a specific value.
Tags used in scoring
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: The document explicitly states that the results are from an 'ongoing infill drilling program'.
Evidence · text
“ongoing infill drilling program”
Rejected tags
Rejected tags — excluded from scoring because their label or evidence could not be verified.
Step-Out ExtensionRejected · positive
Mineralization extended beyond the previously known limit.
Reason: The intercept is described as 'ten metres beyond the end of the historic workings', indicating an extension of known mineralization.
Evidence · text
“ten metres beyond the end of the historic workings”
QA/QC DisclosedRejected · positive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Reason: The release includes a detailed section on QA/QC procedures, including certified labs, blanks, standards, and duplicates.
Evidence · text
“The Company maintains a rigorous sampling and QA/QC procedure for the 2026 drill program.”
Compositing TransparentRejected · positive
Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Reason: The cut-off grade of 1 g/t Au and maximum 3 metre internal waste for compositing are clearly stated.
Evidence · text
“Composites for significant intersections were calculated using a 1 g/t gold (Au) cut off grade and maximum 3 metre internal waste.”
Apparent Width OnlyRejected · negative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Reason: The document states 'All reported intervals are down-hole lengths, with true width estimates ranging from 50-99% of the reported interval', indicating a specific true width is not provided.
Evidence · text
“All reported intervals are down-hole lengths, with true width estimates ranging from 50-99% of the reported interval.”
P26-2705Premier · goldGrade: 36.7Grade Unit: g/tIntercept: 0.9 mView all detailsHide details
Identity
- Hole ID
- P26-2705
- Project
- Premier
- Commodity
- gold
- Region
- canada_bc
- Reported Region
- canada_bc
- Ticker
- CAMB.V
Geometry
- Grade
- 36.7
- Grade Unit
- g/t
- Intercept
- 0.9 m
- Hole Depth
- 338 m
Classification
- Program
- mixed
- Sample Type
- drill
- Group ID
- P26-2705:267.2-276.4
- Mining Method
- underground
Location
- Easting
- 436832
- Northing
- 6212647
- Elevation
- 555 m
- Azimuth
- 164 °
- Dip
- 67 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Canada Ltd.
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Compositing
- Cutoff Grade
- 10
- Cutoff Unit
- g/t Au
- Max Dilution
- 3 m
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-22T00:00:00.000Z
Reasoning: This sub-interval shows an exceptional gold grade, highlighting a very rich zone within the broader intercept, despite its narrow width.
Positive factors
- Exceptional gold grade (36.7 g/t Au) significantly exceeds the underground exceptional threshold (15 g/t Au).
- This is a high-grade sub-interval within a broader significant intercept, indicating very rich mineralization.
Negative factors
- Narrow intercept length (0.9 m).
- True width is estimated as a percentage range rather than a specific value.
Tags used in scoring
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: The document explicitly states that the results are from an 'ongoing infill drilling program'.
Evidence · text
“ongoing infill drilling program”
Rejected tags
Rejected tags — excluded from scoring because their label or evidence could not be verified.
Bonanza InterceptRejected · positive
Exceptionally high-grade zone, well above the deposit-type norm.
Reason: The gold grade of 36.7 g/t exceeds the underground exceptional threshold of 15 g/t Au.
Evidence · text
“36.70 g/t Au & 48 g/t Ag over 0.9m”
QA/QC DisclosedRejected · positive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Reason: The release includes a detailed section on QA/QC procedures, including certified labs, blanks, standards, and duplicates.
Evidence · text
“The Company maintains a rigorous sampling and QA/QC procedure for the 2026 drill program.”
Compositing TransparentRejected · positive
Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Reason: The cut-off grade of 10 g/t Au and maximum 3 metre internal waste for compositing are clearly stated for 'including' intervals.
Evidence · text
““Including” results are reported at a 10 g/t Au cut off grade with maximum 3 metre internal waste.”
Apparent Width OnlyRejected · negative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Reason: The document states 'All reported intervals are down-hole lengths, with true width estimates ranging from 50-99% of the reported interval', indicating a specific true width is not provided.
Evidence · text
“All reported intervals are down-hole lengths, with true width estimates ranging from 50-99% of the reported interval.”
P26-2705Premier · silverGrade: 48Grade Unit: g/tIntercept: 0.9 mView all detailsHide details
Identity
- Hole ID
- P26-2705
- Project
- Premier
- Commodity
- silver
- Region
- canada_bc
- Reported Region
- canada_bc
- Ticker
- CAMB.V
Geometry
- Grade
- 48
- Grade Unit
- g/t
- Intercept
- 0.9 m
- Hole Depth
- 338 m
Classification
- Program
- mixed
- Sample Type
- drill
- Group ID
- P26-2705:267.2-276.4
- Mining Method
- underground
Location
- Easting
- 436832
- Northing
- 6212647
- Elevation
- 555 m
- Azimuth
- 164 °
- Dip
- 67 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Canada Ltd.
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Compositing
- Cutoff Grade
- 10
- Cutoff Unit
- g/t Au
- Max Dilution
- 3 m
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-22T00:00:00.000Z
Reasoning: This sub-interval shows a moderate silver grade, contributing to the overall positive results within the broader intercept, despite its narrow width.
Positive factors
- Moderate silver grade (48 g/t Ag) exceeds the weak threshold (30 g/t Ag).
- This is a high-grade sub-interval within a broader significant intercept, indicating very rich mineralization.
Negative factors
- Narrow intercept length (0.9 m).
- True width is estimated as a percentage range rather than a specific value.
Tags used in scoring
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: The document explicitly states that the results are from an 'ongoing infill drilling program'.
Evidence · text
“ongoing infill drilling program”
Rejected tags
Rejected tags — excluded from scoring because their label or evidence could not be verified.
QA/QC DisclosedRejected · positive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Reason: The release includes a detailed section on QA/QC procedures, including certified labs, blanks, standards, and duplicates.
Evidence · text
“The Company maintains a rigorous sampling and QA/QC procedure for the 2026 drill program.”
Compositing TransparentRejected · positive
Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Reason: The cut-off grade of 10 g/t Au and maximum 3 metre internal waste for compositing are clearly stated for 'including' intervals.
Evidence · text
““Including” results are reported at a 10 g/t Au cut off grade with maximum 3 metre internal waste.”
Apparent Width OnlyRejected · negative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Reason: The document states 'All reported intervals are down-hole lengths, with true width estimates ranging from 50-99% of the reported interval', indicating a specific true width is not provided.
Evidence · text
“All reported intervals are down-hole lengths, with true width estimates ranging from 50-99% of the reported interval.”
P26U-0049Premier · goldGrade: 14.68Grade Unit: g/tIntercept: 10 mView all detailsHide details
Identity
- Hole ID
- P26U-0049
- Project
- Premier
- Commodity
- gold
- Region
- canada_bc
- Reported Region
- canada_bc
- Ticker
- CAMB.V
Geometry
- Grade
- 14.68
- Grade Unit
- g/t
- Intercept
- 10 m
- From
- 15 m
- To
- 25 m
- Hole Depth
- 60.5 m
- Intercept Depth
- 15 m
Classification
- Program
- mixed
- Sample Type
- drill
- Group ID
- P26U-0049:15-25
- Mining Method
- underground
Location
- Easting
- 437231
- Northing
- 6213068
- Elevation
- 340 m
- Azimuth
- 104 °
- Dip
- 89 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Canada Ltd.
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Compositing
- Cutoff Grade
- 1
- Cutoff Unit
- g/t Au
- Max Dilution
- 3 m
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-22T00:00:00.000Z
Reasoning: This intercept shows strong gold grades over a good width, contributing positively to the infill drilling program and confirming mineralization continuity.
Positive factors
- Strong gold grade (14.68 g/t Au) approaches the underground exceptional threshold (15 g/t Au).
- Strong intercept length (10.0 m) indicates good continuity.
- Significant grade-thickness product (146.8 g/t Au·m) is a strong result.
Negative factors
- True width is estimated as a percentage range rather than a specific value.
Tags used in scoring
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: The document explicitly states that the results are from an 'ongoing infill drilling program'.
Evidence · text
“ongoing infill drilling program”
Rejected tags
Rejected tags — excluded from scoring because their label or evidence could not be verified.
QA/QC DisclosedRejected · positive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Reason: The release includes a detailed section on QA/QC procedures, including certified labs, blanks, standards, and duplicates.
Evidence · text
“The Company maintains a rigorous sampling and QA/QC procedure for the 2026 drill program.”
Compositing TransparentRejected · positive
Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Reason: The cut-off grade of 1 g/t Au and maximum 3 metre internal waste for compositing are clearly stated.
Evidence · text
“Composites for significant intersections were calculated using a 1 g/t gold (Au) cut off grade and maximum 3 metre internal waste.”
Apparent Width OnlyRejected · negative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Reason: The document states 'All reported intervals are down-hole lengths, with true width estimates ranging from 50-99% of the reported interval', indicating a specific true width is not provided.
Evidence · text
“All reported intervals are down-hole lengths, with true width estimates ranging from 50-99% of the reported interval.”
P26U-0049Premier · silverGrade: 32Grade Unit: g/tIntercept: 10 mView all detailsHide details
Identity
- Hole ID
- P26U-0049
- Project
- Premier
- Commodity
- silver
- Region
- canada_bc
- Reported Region
- canada_bc
- Ticker
- CAMB.V
Geometry
- Grade
- 32
- Grade Unit
- g/t
- Intercept
- 10 m
- From
- 15 m
- To
- 25 m
- Hole Depth
- 60.5 m
- Intercept Depth
- 15 m
Classification
- Program
- mixed
- Sample Type
- drill
- Group ID
- P26U-0049:15-25
- Mining Method
- underground
Location
- Easting
- 437231
- Northing
- 6213068
- Elevation
- 340 m
- Azimuth
- 104 °
- Dip
- 89 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Canada Ltd.
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Compositing
- Cutoff Grade
- 1
- Cutoff Unit
- g/t Au
- Max Dilution
- 3 m
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-22T00:00:00.000Z
Reasoning: This intercept shows moderate silver grades over a good width, contributing positively to the infill drilling program and confirming mineralization continuity.
Positive factors
- Moderate silver grade (32 g/t Ag) exceeds the weak threshold (30 g/t Ag).
- Strong intercept length (10.0 m) indicates good continuity.
Negative factors
- True width is estimated as a percentage range rather than a specific value.
Tags used in scoring
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: The document explicitly states that the results are from an 'ongoing infill drilling program'.
Evidence · text
“ongoing infill drilling program”
Rejected tags
Rejected tags — excluded from scoring because their label or evidence could not be verified.
QA/QC DisclosedRejected · positive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Reason: The release includes a detailed section on QA/QC procedures, including certified labs, blanks, standards, and duplicates.
Evidence · text
“The Company maintains a rigorous sampling and QA/QC procedure for the 2026 drill program.”
Compositing TransparentRejected · positive
Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Reason: The cut-off grade of 1 g/t Au and maximum 3 metre internal waste for compositing are clearly stated.
Evidence · text
“Composites for significant intersections were calculated using a 1 g/t gold (Au) cut off grade and maximum 3 metre internal waste.”
Apparent Width OnlyRejected · negative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Reason: The document states 'All reported intervals are down-hole lengths, with true width estimates ranging from 50-99% of the reported interval', indicating a specific true width is not provided.
Evidence · text
“All reported intervals are down-hole lengths, with true width estimates ranging from 50-99% of the reported interval.”
P26U-0049Premier · goldGrade: 57.2Grade Unit: g/tIntercept: 2 mView all detailsHide details
Identity
- Hole ID
- P26U-0049
- Project
- Premier
- Commodity
- gold
- Region
- canada_bc
- Reported Region
- canada_bc
- Ticker
- CAMB.V
Geometry
- Grade
- 57.2
- Grade Unit
- g/t
- Intercept
- 2 m
- Hole Depth
- 60.5 m
Classification
- Program
- mixed
- Sample Type
- drill
- Group ID
- P26U-0049:15.0-25.0
- Mining Method
- underground
Location
- Easting
- 437231
- Northing
- 6213068
- Elevation
- 340 m
- Azimuth
- 104 °
- Dip
- 89 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Canada Ltd.
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Compositing
- Cutoff Grade
- 10
- Cutoff Unit
- g/t Au
- Max Dilution
- 3 m
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-22T00:00:00.000Z
Reasoning: This sub-interval shows exceptional gold and high silver grades, highlighting a very rich zone within the broader intercept, despite its narrow width.
Positive factors
- Exceptional gold grade (57.2 g/t Au) significantly exceeds the underground exceptional threshold (15 g/t Au).
- High silver grade (112 g/t Ag) exceeds the moderate threshold (100 g/t Ag).
- This is a high-grade sub-interval within a broader significant intercept, indicating very rich mineralization.
Negative factors
- Narrow intercept length (2.0 m).
- True width is estimated as a percentage range rather than a specific value.
Tags used in scoring
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: The document explicitly states that the results are from an 'ongoing infill drilling program'.
Evidence · text
“ongoing infill drilling program”
Rejected tags
Rejected tags — excluded from scoring because their label or evidence could not be verified.
Bonanza InterceptRejected · positive
Exceptionally high-grade zone, well above the deposit-type norm.
Reason: The gold grade of 57.2 g/t exceeds the underground exceptional threshold of 15 g/t Au.
Evidence · text
“57.20 g/t Au & 112 g/t Ag over 2.0 m”
QA/QC DisclosedRejected · positive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Reason: The release includes a detailed section on QA/QC procedures, including certified labs, blanks, standards, and duplicates.
Evidence · text
“The Company maintains a rigorous sampling and QA/QC procedure for the 2026 drill program.”
Compositing TransparentRejected · positive
Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Reason: The cut-off grade of 10 g/t Au and maximum 3 metre internal waste for compositing are clearly stated for 'including' intervals.
Evidence · text
““Including” results are reported at a 10 g/t Au cut off grade with maximum 3 metre internal waste.”
Apparent Width OnlyRejected · negative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Reason: The document states 'All reported intervals are down-hole lengths, with true width estimates ranging from 50-99% of the reported interval', indicating a specific true width is not provided.
Evidence · text
“All reported intervals are down-hole lengths, with true width estimates ranging from 50-99% of the reported interval.”
P26U-0049Premier · silverGrade: 112Grade Unit: g/tIntercept: 2 mView all detailsHide details
Identity
- Hole ID
- P26U-0049
- Project
- Premier
- Commodity
- silver
- Region
- canada_bc
- Reported Region
- canada_bc
- Ticker
- CAMB.V
Geometry
- Grade
- 112
- Grade Unit
- g/t
- Intercept
- 2 m
- Hole Depth
- 60.5 m
Classification
- Program
- mixed
- Sample Type
- drill
- Group ID
- P26U-0049:15.0-25.0
- Mining Method
- underground
Location
- Easting
- 437231
- Northing
- 6213068
- Elevation
- 340 m
- Azimuth
- 104 °
- Dip
- 89 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Canada Ltd.
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Compositing
- Cutoff Grade
- 10
- Cutoff Unit
- g/t Au
- Max Dilution
- 3 m
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-22T00:00:00.000Z
Reasoning: This sub-interval shows moderate silver and exceptional gold grades, highlighting a very rich zone within the broader intercept, despite its narrow width.
Positive factors
- Moderate silver grade (112 g/t Ag) exceeds the moderate threshold (100 g/t Ag).
- High gold grade (57.2 g/t Au) exceeds the underground exceptional threshold (15 g/t Au).
- This is a high-grade sub-interval within a broader significant intercept, indicating very rich mineralization.
Negative factors
- Narrow intercept length (2.0 m).
- True width is estimated as a percentage range rather than a specific value.
Tags used in scoring
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: The document explicitly states that the results are from an 'ongoing infill drilling program'.
Evidence · text
“ongoing infill drilling program”
Rejected tags
Rejected tags — excluded from scoring because their label or evidence could not be verified.
QA/QC DisclosedRejected · positive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Reason: The release includes a detailed section on QA/QC procedures, including certified labs, blanks, standards, and duplicates.
Evidence · text
“The Company maintains a rigorous sampling and QA/QC procedure for the 2026 drill program.”
Compositing TransparentRejected · positive
Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Reason: The cut-off grade of 10 g/t Au and maximum 3 metre internal waste for compositing are clearly stated for 'including' intervals.
Evidence · text
““Including” results are reported at a 10 g/t Au cut off grade with maximum 3 metre internal waste.”
Apparent Width OnlyRejected · negative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Reason: The document states 'All reported intervals are down-hole lengths, with true width estimates ranging from 50-99% of the reported interval', indicating a specific true width is not provided.
Evidence · text
“All reported intervals are down-hole lengths, with true width estimates ranging from 50-99% of the reported interval.”
P26U-0051Premier · goldGrade: 37.38Grade Unit: g/tIntercept: 5 mView all detailsHide details
Identity
- Hole ID
- P26U-0051
- Project
- Premier
- Commodity
- gold
- Region
- canada_bc
- Reported Region
- canada_bc
- Ticker
- CAMB.V
Geometry
- Grade
- 37.38
- Grade Unit
- g/t
- Intercept
- 5 m
- From
- 16 m
- To
- 21 m
- Hole Depth
- 60 m
- Intercept Depth
- 16 m
Classification
- Program
- mixed
- Sample Type
- drill
- Group ID
- P26U-0051:16-21
- Mining Method
- underground
Location
- Easting
- 437237
- Northing
- 6213081
- Elevation
- 342 m
- Azimuth
- 325 °
- Dip
- 86 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Canada Ltd.
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Compositing
- Cutoff Grade
- 1
- Cutoff Unit
- g/t Au
- Max Dilution
- 3 m
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-22T00:00:00.000Z
Reasoning: This intercept shows exceptional gold and high silver grades over a moderate width, contributing positively to the infill drilling program and confirming mineralization continuity.
Positive factors
- Exceptional gold grade (37.38 g/t Au) significantly exceeds the underground exceptional threshold (15 g/t Au).
- High silver grade (134 g/t Ag) exceeds the moderate threshold (100 g/t Ag).
- Significant grade-thickness product (186.9 g/t Au·m) is a strong result.
Negative factors
- True width is estimated as a percentage range rather than a specific value.
Tags used in scoring
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: The document explicitly states that the results are from an 'ongoing infill drilling program'.
Evidence · text
“ongoing infill drilling program”
Rejected tags
Rejected tags — excluded from scoring because their label or evidence could not be verified.
Bonanza InterceptRejected · positive
Exceptionally high-grade zone, well above the deposit-type norm.
Reason: The gold grade of 37.38 g/t exceeds the underground exceptional threshold of 15 g/t Au.
Evidence · text
“37.38 g/t Au and 134 g/t Ag over 5.0 m”
QA/QC DisclosedRejected · positive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Reason: The release includes a detailed section on QA/QC procedures, including certified labs, blanks, standards, and duplicates.
Evidence · text
“The Company maintains a rigorous sampling and QA/QC procedure for the 2026 drill program.”
Compositing TransparentRejected · positive
Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Reason: The cut-off grade of 1 g/t Au and maximum 3 metre internal waste for compositing are clearly stated.
Evidence · text
“Composites for significant intersections were calculated using a 1 g/t gold (Au) cut off grade and maximum 3 metre internal waste.”
Apparent Width OnlyRejected · negative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Reason: The document states 'All reported intervals are down-hole lengths, with true width estimates ranging from 50-99% of the reported interval', indicating a specific true width is not provided.
Evidence · text
“All reported intervals are down-hole lengths, with true width estimates ranging from 50-99% of the reported interval.”
P26U-0051Premier · silverGrade: 134Grade Unit: g/tIntercept: 5 mView all detailsHide details
Identity
- Hole ID
- P26U-0051
- Project
- Premier
- Commodity
- silver
- Region
- canada_bc
- Reported Region
- canada_bc
- Ticker
- CAMB.V
Geometry
- Grade
- 134
- Grade Unit
- g/t
- Intercept
- 5 m
- From
- 16 m
- To
- 21 m
- Hole Depth
- 60 m
- Intercept Depth
- 16 m
Classification
- Program
- mixed
- Sample Type
- drill
- Group ID
- P26U-0051:16-21
- Mining Method
- underground
Location
- Easting
- 437237
- Northing
- 6213081
- Elevation
- 342 m
- Azimuth
- 325 °
- Dip
- 86 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Canada Ltd.
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Compositing
- Cutoff Grade
- 1
- Cutoff Unit
- g/t Au
- Max Dilution
- 3 m
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-22T00:00:00.000Z
Reasoning: This intercept shows moderate silver and exceptional gold grades over a moderate width, contributing positively to the infill drilling program and confirming mineralization continuity.
Positive factors
- Moderate silver grade (134 g/t Ag) exceeds the moderate threshold (100 g/t Ag).
- Exceptional gold grade (37.38 g/t Au) exceeds the underground exceptional threshold (15 g/t Au).
- Significant grade-thickness product (670 g/t Ag·m) is a strong result.
Negative factors
- True width is estimated as a percentage range rather hạn a specific value.
Tags used in scoring
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: The document explicitly states that the results are from an 'ongoing infill drilling program'.
Evidence · text
“ongoing infill drilling program”
Rejected tags
Rejected tags — excluded from scoring because their label or evidence could not be verified.
QA/QC DisclosedRejected · positive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Reason: The release includes a detailed section on QA/QC procedures, including certified labs, blanks, standards, and duplicates.
Evidence · text
“The Company maintains a rigorous sampling and QA/QC procedure for the 2026 drill program.”
Compositing TransparentRejected · positive
Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Reason: The cut-off grade of 1 g/t Au and maximum 3 metre internal waste for compositing are clearly stated.
Evidence · text
“Composites for significant intersections were calculated using a 1 g/t gold (Au) cut off grade and maximum 3 metre internal waste.”
Apparent Width OnlyRejected · negative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Reason: The document states 'All reported intervals are down-hole lengths, with true width estimates ranging from 50-99% of the reported interval', indicating a specific true width is not provided.
Evidence · text
“All reported intervals are down-hole lengths, with true width estimates ranging from 50-99% of the reported interval.”
P26U-0051Premier · goldGrade: 46.18Grade Unit: g/tIntercept: 4 mView all detailsHide details
Identity
- Hole ID
- P26U-0051
- Project
- Premier
- Commodity
- gold
- Region
- canada_bc
- Reported Region
- canada_bc
- Ticker
- CAMB.V
Geometry
- Grade
- 46.18
- Grade Unit
- g/t
- Intercept
- 4 m
- Hole Depth
- 60 m
Classification
- Program
- mixed
- Sample Type
- drill
- Group ID
- P26U-0051:16.0-21.0
- Mining Method
- underground
Location
- Easting
- 437237
- Northing
- 6213081
- Elevation
- 342 m
- Azimuth
- 325 °
- Dip
- 86 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Canada Ltd.
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Compositing
- Cutoff Grade
- 10
- Cutoff Unit
- g/t Au
- Max Dilution
- 3 m
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-22T00:00:00.000Z
Reasoning: This sub-interval shows exceptional gold and high silver grades over a good width, highlighting a very rich zone within the broader intercept.
Positive factors
- Exceptional gold grade (46.18 g/t Au) significantly exceeds the underground exceptional threshold (15 g/t Au).
- High silver grade (165 g/t Ag) exceeds the moderate threshold (100 g/t Ag).
- Significant grade-thickness product (184.72 g/t Au·m) is a strong result.
- This is a high-grade sub-interval within a broader significant intercept, indicating very rich mineralization.
Negative factors
- True width is estimated as a percentage range rather than a specific value.
Tags used in scoring
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: The document explicitly states that the results are from an 'ongoing infill drilling program'.
Evidence · text
“ongoing infill drilling program”
Rejected tags
Rejected tags — excluded from scoring because their label or evidence could not be verified.
Bonanza InterceptRejected · positive
Exceptionally high-grade zone, well above the deposit-type norm.
Reason: The gold grade of 46.18 g/t exceeds the underground exceptional threshold of 15 g/t Au.
Evidence · text
“46.18 g/t Au & 165 g/t Ag over 4.0 m”
QA/QC DisclosedRejected · positive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Reason: The release includes a detailed section on QA/QC procedures, including certified labs, blanks, standards, and duplicates.
Evidence · text
“The Company maintains a rigorous sampling and QA/QC procedure for the 2026 drill program.”
Compositing TransparentRejected · positive
Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Reason: The cut-off grade of 10 g/t Au and maximum 3 metre internal waste for compositing are clearly stated for 'including' intervals.
Evidence · text
““Including” results are reported at a 10 g/t Au cut off grade with maximum 3 metre internal waste.”
Apparent Width OnlyRejected · negative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Reason: The document states 'All reported intervals are down-hole lengths, with true width estimates ranging from 50-99% of the reported interval', indicating a specific true width is not provided.
Evidence · text
“All reported intervals are down-hole lengths, with true width estimates ranging from 50-99% of the reported interval.”
P26U-0051Premier · silverGrade: 165Grade Unit: g/tIntercept: 4 mView all detailsHide details
Identity
- Hole ID
- P26U-0051
- Project
- Premier
- Commodity
- silver
- Region
- canada_bc
- Reported Region
- canada_bc
- Ticker
- CAMB.V
Geometry
- Grade
- 165
- Grade Unit
- g/t
- Intercept
- 4 m
- Hole Depth
- 60 m
Classification
- Program
- mixed
- Sample Type
- drill
- Group ID
- P26U-0051:16.0-21.0
- Mining Method
- underground
Location
- Easting
- 437237
- Northing
- 6213081
- Elevation
- 342 m
- Azimuth
- 325 °
- Dip
- 86 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Canada Ltd.
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Compositing
- Cutoff Grade
- 10
- Cutoff Unit
- g/t Au
- Max Dilution
- 3 m
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-22T00:00:00.000Z
Reasoning: This sub-interval shows moderate silver and exceptional gold grades over a good width, highlighting a very rich zone within the broader intercept.
Positive factors
- Moderate silver grade (165 g/t Ag) exceeds the moderate threshold (100 g/t Ag).
- Exceptional gold grade (46.18 g/t Au) exceeds the underground exceptional threshold (15 g/t Au).
- Significant grade-thickness product (660 g/t Ag·m) is a strong result.
- This is a high-grade sub-interval within a broader significant intercept, indicating very rich mineralization.
Negative factors
- True width is estimated as a percentage range rather than a specific value.
Tags used in scoring
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: The document explicitly states that the results are from an 'ongoing infill drilling program'.
Evidence · text
“ongoing infill drilling program”
Rejected tags
Rejected tags — excluded from scoring because their label or evidence could not be verified.
QA/QC DisclosedRejected · positive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Reason: The release includes a detailed section on QA/QC procedures, including certified labs, blanks, standards, and duplicates.
Evidence · text
“The Company maintains a rigorous sampling and QA/QC procedure for the 2026 drill program.”
Compositing TransparentRejected · positive
Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Reason: The cut-off grade of 10 g/t Au and maximum 3 metre internal waste for compositing are clearly stated for 'including' intervals.
Evidence · text
““Including” results are reported at a 10 g/t Au cut off grade with maximum 3 metre internal waste.”
Apparent Width OnlyRejected · negative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Reason: The document states 'All reported intervals are down-hole lengths, with true width estimates ranging from 50-99% of the reported interval', indicating a specific true width is not provided.
Evidence · text
“All reported intervals are down-hole lengths, with true width estimates ranging from 50-99% of the reported interval.”
P26U-0052Premier · goldGrade: 42.88Grade Unit: g/tIntercept: 3 mView all detailsHide details
Identity
- Hole ID
- P26U-0052
- Project
- Premier
- Commodity
- gold
- Region
- canada_bc
- Reported Region
- canada_bc
- Ticker
- CAMB.V
Geometry
- Grade
- 42.88
- Grade Unit
- g/t
- Intercept
- 3 m
- From
- 8 m
- To
- 11 m
- Hole Depth
- 80 m
- Intercept Depth
- 8 m
Classification
- Program
- mixed
- Sample Type
- drill
- Group ID
- P26U-0052:8-11
- Mining Method
- underground
Location
- Easting
- 437239
- Northing
- 6213079
- Elevation
- 341 m
- Azimuth
- 135 °
- Dip
- 74 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Canada Ltd.
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Compositing
- Cutoff Grade
- 1
- Cutoff Unit
- g/t Au
- Max Dilution
- 3 m
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-22T00:00:00.000Z
Reasoning: This intercept shows exceptional gold and strong silver grades over a narrow but significant width, contributing positively to the infill drilling program.
Positive factors
- Exceptional gold grade (42.88 g/t Au) significantly exceeds the underground exceptional threshold (15 g/t Au).
- High silver grade (207 g/t Ag) exceeds the strong threshold (200 g/t Ag).
- Significant grade-thickness product (128.64 g/t Au·m) is a strong result.
Negative factors
- Narrow intercept length (3.0 m).
- True width is estimated as a percentage range rather than a specific value.
Tags used in scoring
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: The document explicitly states that the results are from an 'ongoing infill drilling program'.
Evidence · text
“ongoing infill drilling program”
Rejected tags
Rejected tags — excluded from scoring because their label or evidence could not be verified.
Bonanza InterceptRejected · positive
Exceptionally high-grade zone, well above the deposit-type norm.
Reason: The gold grade of 42.88 g/t exceeds the underground exceptional threshold of 15 g/t Au.
Evidence · text
“42.88 g/t Au and 207 g/t Ag over 3.0 m”
QA/QC DisclosedRejected · positive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Reason: The release includes a detailed section on QA/QC procedures, including certified labs, blanks, standards, and duplicates.
Evidence · text
“The Company maintains a rigorous sampling and QA/QC procedure for the 2026 drill program.”
Compositing TransparentRejected · positive
Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Reason: The cut-off grade of 1 g/t Au and maximum 3 metre internal waste for compositing are clearly stated.
Evidence · text
“Composites for significant intersections were calculated using a 1 g/t gold (Au) cut off grade and maximum 3 metre internal waste.”
Apparent Width OnlyRejected · negative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Reason: The document states 'All reported intervals are down-hole lengths, with true width estimates ranging from 50-99% of the reported interval', indicating a specific true width is not provided.
Evidence · text
“All reported intervals are down-hole lengths, with true width estimates ranging from 50-99% of the reported interval.”
P26U-0052Premier · silverGrade: 207Grade Unit: g/tIntercept: 3 mView all detailsHide details
Identity
- Hole ID
- P26U-0052
- Project
- Premier
- Commodity
- silver
- Region
- canada_bc
- Reported Region
- canada_bc
- Ticker
- CAMB.V
Geometry
- Grade
- 207
- Grade Unit
- g/t
- Intercept
- 3 m
- From
- 8 m
- To
- 11 m
- Hole Depth
- 80 m
- Intercept Depth
- 8 m
Classification
- Program
- mixed
- Sample Type
- drill
- Group ID
- P26U-0052:8-11
- Mining Method
- underground
Location
- Easting
- 437239
- Northing
- 6213079
- Elevation
- 341 m
- Azimuth
- 135 °
- Dip
- 74 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Canada Ltd.
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Compositing
- Cutoff Grade
- 1
- Cutoff Unit
- g/t Au
- Max Dilution
- 3 m
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-22T00:00:00.000Z
Reasoning: This intercept shows strong silver and exceptional gold grades over a narrow but significant width, contributing positively to the infill drilling program.
Positive factors
- Strong silver grade (207 g/t Ag) exceeds the strong threshold (200 g/t Ag).
- Exceptional gold grade (42.88 g/t Au) exceeds the underground exceptional threshold (15 g/t Au).
- Significant grade-thickness product (621 g/t Ag·m) is a strong result.
Negative factors
- Narrow intercept length (3.0 m).
- True width is estimated as a percentage range rather than a specific value.
Tags used in scoring
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: The document explicitly states that the results are from an 'ongoing infill drilling program'.
Evidence · text
“ongoing infill drilling program”
Rejected tags
Rejected tags — excluded from scoring because their label or evidence could not be verified.
QA/QC DisclosedRejected · positive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Reason: The release includes a detailed section on QA/QC procedures, including certified labs, blanks, standards, and duplicates.
Evidence · text
“The Company maintains a rigorous sampling and QA/QC procedure for the 2026 drill program.”
Compositing TransparentRejected · positive
Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Reason: The cut-off grade of 1 g/t Au and maximum 3 metre internal waste for compositing are clearly stated.
Evidence · text
“Composites for significant intersections were calculated using a 1 g/t gold (Au) cut off grade and maximum 3 metre internal waste.”
Apparent Width OnlyRejected · negative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Reason: The document states 'All reported intervals are down-hole lengths, with true width estimates ranging from 50-99% of the reported interval', indicating a specific true width is not provided.
Evidence · text
“All reported intervals are down-hole lengths, with true width estimates ranging from 50-99% of the reported interval.”
P26U-0052Premier · goldGrade: 126.5Grade Unit: g/tIntercept: 1 mView all detailsHide details
Identity
- Hole ID
- P26U-0052
- Project
- Premier
- Commodity
- gold
- Region
- canada_bc
- Reported Region
- canada_bc
- Ticker
- CAMB.V
Geometry
- Grade
- 126.5
- Grade Unit
- g/t
- Intercept
- 1 m
- Hole Depth
- 80 m
Classification
- Program
- mixed
- Sample Type
- drill
- Group ID
- P26U-0052:8.0-11.0
- Mining Method
- underground
Location
- Easting
- 437239
- Northing
- 6213079
- Elevation
- 341 m
- Azimuth
- 135 °
- Dip
- 74 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Canada Ltd.
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Compositing
- Cutoff Grade
- 10
- Cutoff Unit
- g/t Au
- Max Dilution
- 3 m
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-22T00:00:00.000Z
Reasoning: This sub-interval shows exceptional gold and silver grades, highlighting a very rich zone within the broader intercept, despite its narrow width.
Positive factors
- Exceptional gold grade (126.5 g/t Au) significantly exceeds the underground exceptional threshold (15 g/t Au).
- High silver grade (599 g/t Ag) exceeds the exceptional threshold (500 g/t Ag).
- This is a high-grade sub-interval within a broader significant intercept, indicating very rich mineralization.
Negative factors
- Narrow intercept length (1.0 m).
- True width is estimated as a percentage range rather than a specific value.
Tags used in scoring
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: The document explicitly states that the results are from an 'ongoing infill drilling program'.
Evidence · text
“ongoing infill drilling program”
Rejected tags
Rejected tags — excluded from scoring because their label or evidence could not be verified.
Bonanza InterceptRejected · positive
Exceptionally high-grade zone, well above the deposit-type norm.
Reason: The gold grade of 126.5 g/t exceeds the underground exceptional threshold of 15 g/t Au.
Evidence · text
“126.5 g/t Au & 599 g/t Ag over 1.0 m”
QA/QC DisclosedRejected · positive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Reason: The release includes a detailed section on QA/QC procedures, including certified labs, blanks, standards, and duplicates.
Evidence · text
“The Company maintains a rigorous sampling and QA/QC procedure for the 2026 drill program.”
Compositing TransparentRejected · positive
Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Reason: The cut-off grade of 10 g/t Au and maximum 3 metre internal waste for compositing are clearly stated for 'including' intervals.
Evidence · text
““Including” results are reported at a 10 g/t Au cut off grade with maximum 3 metre internal waste.”
Apparent Width OnlyRejected · negative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Reason: The document states 'All reported intervals are down-hole lengths, with true width estimates ranging from 50-99% of the reported interval', indicating a specific true width is not provided.
Evidence · text
“All reported intervals are down-hole lengths, with true width estimates ranging from 50-99% of the reported interval.”
P26U-0052Premier · silverGrade: 599Grade Unit: g/tIntercept: 1 mView all detailsHide details
Identity
- Hole ID
- P26U-0052
- Project
- Premier
- Commodity
- silver
- Region
- canada_bc
- Reported Region
- canada_bc
- Ticker
- CAMB.V
Geometry
- Grade
- 599
- Grade Unit
- g/t
- Intercept
- 1 m
- Hole Depth
- 80 m
Classification
- Program
- mixed
- Sample Type
- drill
- Group ID
- P26U-0052:8.0-11.0
- Mining Method
- underground
Location
- Easting
- 437239
- Northing
- 6213079
- Elevation
- 341 m
- Azimuth
- 135 °
- Dip
- 74 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Canada Ltd.
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Compositing
- Cutoff Grade
- 10
- Cutoff Unit
- g/t Au
- Max Dilution
- 3 m
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-22T00:00:00.000Z
Reasoning: This sub-interval shows exceptional silver and gold grades, highlighting a very rich zone within the broader intercept, despite its narrow width.
Positive factors
- Exceptional silver grade (599 g/t Ag) significantly exceeds the exceptional threshold (500 g/t Ag).
- Exceptional gold grade (126.5 g/t Au) exceeds the underground exceptional threshold (15 g/t Au).
- This is a high-grade sub-interval within a broader significant intercept, indicating very rich mineralization.
Negative factors
- Narrow intercept length (1.0 m).
- True width is estimated as a percentage range rather than a specific value.
Tags used in scoring
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: The document explicitly states that the results are from an 'ongoing infill drilling program'.
Evidence · text
“ongoing infill drilling program”
Rejected tags
Rejected tags — excluded from scoring because their label or evidence could not be verified.
Bonanza InterceptRejected · positive
Exceptionally high-grade zone, well above the deposit-type norm.
Reason: The silver grade of 599 g/t exceeds the exceptional threshold of 500 g/t Ag.
Evidence · text
“126.5 g/t Au & 599 g/t Ag over 1.0 m”
QA/QC DisclosedRejected · positive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Reason: The release includes a detailed section on QA/QC procedures, including certified labs, blanks, standards, and duplicates.
Evidence · text
“The Company maintains a rigorous sampling and QA/QC procedure for the 2026 drill program.”
Compositing TransparentRejected · positive
Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Reason: The cut-off grade of 10 g/t Au and maximum 3 metre internal waste for compositing are clearly stated for 'including' intervals.
Evidence · text
““Including” results are reported at a 10 g/t Au cut off grade with maximum 3 metre internal waste.”
Apparent Width OnlyRejected · negative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Reason: The document states 'All reported intervals are down-hole lengths, with true width estimates ranging from 50-99% of the reported interval', indicating a specific true width is not provided.
Evidence · text
“All reported intervals are down-hole lengths, with true width estimates ranging from 50-99% of the reported interval.”
P26U-0084Premier · goldGrade: 31.26Grade Unit: g/tIntercept: 4 mView all detailsHide details
Identity
- Hole ID
- P26U-0084
- Project
- Premier
- Commodity
- gold
- Region
- canada_bc
- Reported Region
- canada_bc
- Ticker
- CAMB.V
Geometry
- Grade
- 31.26
- Grade Unit
- g/t
- Intercept
- 4 m
- From
- 4 m
- To
- 8 m
- Hole Depth
- 89 m
- Intercept Depth
- 4 m
Classification
- Program
- mixed
- Sample Type
- drill
- Group ID
- P26U-0084:4-8
- Mining Method
- underground
Location
- Easting
- 437265
- Northing
- 6213106
- Elevation
- 333 m
- Azimuth
- 136 °
- Dip
- 23 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Canada Ltd.
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Compositing
- Cutoff Grade
- 1
- Cutoff Unit
- g/t Au
- Max Dilution
- 3 m
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-22T00:00:00.000Z
Reasoning: This intercept shows exceptional gold and high silver grades over a moderate width, contributing positively to the infill drilling program and confirming mineralization continuity.
Positive factors
- Exceptional gold grade (31.26 g/t Au) significantly exceeds the underground exceptional threshold (15 g/t Au).
- High silver grade (94 g/t Ag) approaches the moderate threshold (100 g/t Ag).
- Significant grade-thickness product (125.04 g/t Au·m) is a strong result.
Negative factors
- True width is estimated as a percentage range rather than a specific value.
Tags used in scoring
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: The document explicitly states that the results are from an 'ongoing infill drilling program'.
Evidence · text
“ongoing infill drilling program”
Rejected tags
Rejected tags — excluded from scoring because their label or evidence could not be verified.
Bonanza InterceptRejected · positive
Exceptionally high-grade zone, well above the deposit-type norm.
Reason: The gold grade of 31.26 g/t exceeds the underground exceptional threshold of 15 g/t Au.
Evidence · text
“31.26 g/t Au and 94 g/t Ag over 4.0 m”
QA/QC DisclosedRejected · positive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Reason: The release includes a detailed section on QA/QC procedures, including certified labs, blanks, standards, and duplicates.
Evidence · text
“The Company maintains a rigorous sampling and QA/QC procedure for the 2026 drill program.”
Compositing TransparentRejected · positive
Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Reason: The cut-off grade of 1 g/t Au and maximum 3 metre internal waste for compositing are clearly stated.
Evidence · text
“Composites for significant intersections were calculated using a 1 g/t gold (Au) cut off grade and maximum 3 metre internal waste.”
Apparent Width OnlyRejected · negative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Reason: The document states 'All reported intervals are down-hole lengths, with true width estimates ranging from 50-99% of the reported interval', indicating a specific true width is not provided.
Evidence · text
“All reported intervals are down-hole lengths, with true width estimates ranging from 50-99% of the reported interval.”
P26U-0084Premier · silverGrade: 94Grade Unit: g/tIntercept: 4 mView all detailsHide details
Identity
- Hole ID
- P26U-0084
- Project
- Premier
- Commodity
- silver
- Region
- canada_bc
- Reported Region
- canada_bc
- Ticker
- CAMB.V
Geometry
- Grade
- 94
- Grade Unit
- g/t
- Intercept
- 4 m
- From
- 4 m
- To
- 8 m
- Hole Depth
- 89 m
- Intercept Depth
- 4 m
Classification
- Program
- mixed
- Sample Type
- drill
- Group ID
- P26U-0084:4-8
- Mining Method
- underground
Location
- Easting
- 437265
- Northing
- 6213106
- Elevation
- 333 m
- Azimuth
- 136 °
- Dip
- 23 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Canada Ltd.
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Compositing
- Cutoff Grade
- 1
- Cutoff Unit
- g/t Au
- Max Dilution
- 3 m
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-22T00:00:00.000Z
Reasoning: This intercept shows moderate silver and exceptional gold grades over a moderate width, contributing positively to the infill drilling program and confirming mineralization continuity.
Positive factors
- Moderate silver grade (94 g/t Ag) approaches the moderate threshold (100 g/t Ag).
- Exceptional gold grade (31.26 g/t Au) exceeds the underground exceptional threshold (15 g/t Au).
- Significant grade-thickness product (376 g/t Ag·m) is a strong result.
Negative factors
- True width is estimated as a percentage range rather than a specific value.
Tags used in scoring
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: The document explicitly states that the results are from an 'ongoing infill drilling program'.
Evidence · text
“ongoing infill drilling program”
Rejected tags
Rejected tags — excluded from scoring because their label or evidence could not be verified.
QA/QC DisclosedRejected · positive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Reason: The release includes a detailed section on QA/QC procedures, including certified labs, blanks, standards, and duplicates.
Evidence · text
“The Company maintains a rigorous sampling and QA/QC procedure for the 2026 drill program.”
Compositing TransparentRejected · positive
Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Reason: The cut-off grade of 1 g/t Au and maximum 3 metre internal waste for compositing are clearly stated.
Evidence · text
“Composites for significant intersections were calculated using a 1 g/t gold (Au) cut off grade and maximum 3 metre internal waste.”
Apparent Width OnlyRejected · negative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Reason: The document states 'All reported intervals are down-hole lengths, with true width estimates ranging from 50-99% of the reported interval', indicating a specific true width is not provided.
Evidence · text
“All reported intervals are down-hole lengths, with true width estimates ranging from 50-99% of the reported interval.”
P26U-0084Premier · goldGrade: 135.5Grade Unit: g/tIntercept: 0.8 mView all detailsHide details
Identity
- Hole ID
- P26U-0084
- Project
- Premier
- Commodity
- gold
- Region
- canada_bc
- Reported Region
- canada_bc
- Ticker
- CAMB.V
Geometry
- Grade
- 135.5
- Grade Unit
- g/t
- Intercept
- 0.8 m
- Hole Depth
- 89 m
Classification
- Program
- mixed
- Sample Type
- drill
- Group ID
- P26U-0084:4.0-8.0
- Mining Method
- underground
Location
- Easting
- 437265
- Northing
- 6213106
- Elevation
- 333 m
- Azimuth
- 136 °
- Dip
- 23 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Canada Ltd.
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Compositing
- Cutoff Grade
- 10
- Cutoff Unit
- g/t Au
- Max Dilution
- 3 m
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-22T00:00:00.000Z
Reasoning: This sub-interval shows exceptional gold and strong silver grades, highlighting a very rich zone within the broader intercept, despite its narrow width.
Positive factors
- Exceptional gold grade (135.5 g/t Au) significantly exceeds the underground exceptional threshold (15 g/t Au).
- High silver grade (218 g/t Ag) exceeds the strong threshold (200 g/t Ag).
- This is a high-grade sub-interval within a broader significant intercept, indicating very rich mineralization.
Negative factors
- Narrow intercept length (0.8 m).
- True width is estimated as a percentage range rather than a specific value.
Tags used in scoring
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: The document explicitly states that the results are from an 'ongoing infill drilling program'.
Evidence · text
“ongoing infill drilling program”
Rejected tags
Rejected tags — excluded from scoring because their label or evidence could not be verified.
Bonanza InterceptRejected · positive
Exceptionally high-grade zone, well above the deposit-type norm.
Reason: The gold grade of 135.5 g/t exceeds the underground exceptional threshold of 15 g/t Au.
Evidence · text
“135.5 g/t Au & 218 g/t Ag over 0.8m”
QA/QC DisclosedRejected · positive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Reason: The release includes a detailed section on QA/QC procedures, including certified labs, blanks, standards, and duplicates.
Evidence · text
“The Company maintains a rigorous sampling and QA/QC procedure for the 2026 drill program.”
Compositing TransparentRejected · positive
Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Reason: The cut-off grade of 10 g/t Au and maximum 3 metre internal waste for compositing are clearly stated for 'including' intervals.
Evidence · text
““Including” results are reported at a 10 g/t Au cut off grade with maximum 3 metre internal waste.”
Apparent Width OnlyRejected · negative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Reason: The document states 'All reported intervals are down-hole lengths, with true width estimates ranging from 50-99% of the reported interval', indicating a specific true width is not provided.
Evidence · text
“All reported intervals are down-hole lengths, with true width estimates ranging from 50-99% of the reported interval.”
P26U-0084Premier · silverGrade: 218Grade Unit: g/tIntercept: 0.8 mView all detailsHide details
Identity
- Hole ID
- P26U-0084
- Project
- Premier
- Commodity
- silver
- Region
- canada_bc
- Reported Region
- canada_bc
- Ticker
- CAMB.V
Geometry
- Grade
- 218
- Grade Unit
- g/t
- Intercept
- 0.8 m
- Hole Depth
- 89 m
Classification
- Program
- mixed
- Sample Type
- drill
- Group ID
- P26U-0084:4.0-8.0
- Mining Method
- underground
Location
- Easting
- 437265
- Northing
- 6213106
- Elevation
- 333 m
- Azimuth
- 136 °
- Dip
- 23 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Canada Ltd.
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Compositing
- Cutoff Grade
- 10
- Cutoff Unit
- g/t Au
- Max Dilution
- 3 m
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-22T00:00:00.000Z
Reasoning: This sub-interval shows strong silver and exceptional gold grades, highlighting a very rich zone within the broader intercept, despite its narrow width.
Positive factors
- Strong silver grade (218 g/t Ag) exceeds the strong threshold (200 g/t Ag).
- Exceptional gold grade (135.5 g/t Au) exceeds the underground exceptional threshold (15 g/t Au).
- This is a high-grade sub-interval within a broader significant intercept, indicating very rich mineralization.
Negative factors
- Narrow intercept length (0.8 m).
- True width is estimated as a percentage range rather than a specific value.
Tags used in scoring
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: The document explicitly states that the results are from an 'ongoing infill drilling program'.
Evidence · text
“ongoing infill drilling program”
Rejected tags
Rejected tags — excluded from scoring because their label or evidence could not be verified.
QA/QC DisclosedRejected · positive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Reason: The release includes a detailed section on QA/QC procedures, including certified labs, blanks, standards, and duplicates.
Evidence · text
“The Company maintains a rigorous sampling and QA/QC procedure for the 2026 drill program.”
Compositing TransparentRejected · positive
Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Reason: The cut-off grade of 10 g/t Au and maximum 3 metre internal waste for compositing are clearly stated for 'including' intervals.
Evidence · text
““Including” results are reported at a 10 g/t Au cut off grade with maximum 3 metre internal waste.”
Apparent Width OnlyRejected · negative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Reason: The document states 'All reported intervals are down-hole lengths, with true width estimates ranging from 50-99% of the reported interval', indicating a specific true width is not provided.
Evidence · text
“All reported intervals are down-hole lengths, with true width estimates ranging from 50-99% of the reported interval.”
P26-2699Premier · goldGrade: 2.69Grade Unit: ppmIntercept: 8 mView all detailsHide details
Identity
- Hole ID
- P26-2699
- Project
- Premier
- Commodity
- gold
- Region
- canada_bc
- Reported Region
- canada_bc
- Ticker
- CAMB.V
Geometry
- Grade
- 2.69
- Grade Unit
- ppm
- Intercept
- 8 m
- From
- 213 m
- To
- 221 m
- Hole Depth
- 249 m
- Intercept Depth
- 213 m
Classification
- Program
- mixed
- Sample Type
- drill
- Group ID
- P26-2699:213-221
- Mining Method
- underground
Location
- Easting
- 436791
- Northing
- 6213027
- Elevation
- 451 m
- Azimuth
- 251 °
- Dip
- 50 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Canada Ltd.
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Compositing
- Cutoff Grade
- 1
- Cutoff Unit
- g/t Au
- Max Dilution
- 3 m
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-22T00:00:00.000Z
Reasoning: This intercept shows a weak but continuous gold grade over a good width, contributing to the overall infill drilling program.
Positive factors
- Weak gold grade (2.69 ppm) exceeds the underground weak threshold (2.5 g/t Au).
- Strong intercept length (8.0 m) indicates good continuity.
Negative factors
- True width is estimated as a percentage range rather than a specific value.
Tags used in scoring
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: The document explicitly states that the results are from an 'ongoing infill drilling program'.
Evidence · text
“ongoing infill drilling program”
Rejected tags
Rejected tags — excluded from scoring because their label or evidence could not be verified.
QA/QC DisclosedRejected · positive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Reason: The release includes a detailed section on QA/QC procedures, including certified labs, blanks, standards, and duplicates.
Evidence · text
“The Company maintains a rigorous sampling and QA/QC procedure for the 2026 drill program.”
Compositing TransparentRejected · positive
Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Reason: The cut-off grade of 1 g/t Au and maximum 3 metre internal waste for compositing are clearly stated.
Evidence · text
“Composites for significant intersections were calculated using a 1 g/t gold (Au) cut off grade and maximum 3 metre internal waste.”
Apparent Width OnlyRejected · negative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Reason: The document states 'All reported intervals are down-hole lengths, with true width estimates ranging from 50-99% of the reported interval', indicating a specific true width is not provided.
Evidence · text
“All reported intervals are down-hole lengths, with true width estimates ranging from 50-99% of the reported interval.”
P26-2699Premier · silverGrade: 10.9Grade Unit: ppmIntercept: 8 mView all detailsHide details
Identity
- Hole ID
- P26-2699
- Project
- Premier
- Commodity
- silver
- Region
- canada_bc
- Reported Region
- canada_bc
- Ticker
- CAMB.V
Geometry
- Grade
- 10.9
- Grade Unit
- ppm
- Intercept
- 8 m
- From
- 213 m
- To
- 221 m
- Hole Depth
- 249 m
- Intercept Depth
- 213 m
Classification
- Program
- mixed
- Sample Type
- drill
- Group ID
- P26-2699:213-221
- Mining Method
- underground
Location
- Easting
- 436791
- Northing
- 6213027
- Elevation
- 451 m
- Azimuth
- 251 °
- Dip
- 50 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Canada Ltd.
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Compositing
- Cutoff Grade
- 1
- Cutoff Unit
- g/t Au
- Max Dilution
- 3 m
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-22T00:00:00.000Z
Reasoning: This intercept shows a low silver grade over a good width, contributing to the overall infill drilling program but not a highlight.
Positive factors
- The intercept length (8.0 m) indicates good continuity.
Negative factors
- Silver grade (10.9 ppm) is below the weak threshold (30 g/t Ag).
- True width is estimated as a percentage range rather than a specific value.
Tags used in scoring
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: The document explicitly states that the results are from an 'ongoing infill drilling program'.
Evidence · text
“ongoing infill drilling program”
Rejected tags
Rejected tags — excluded from scoring because their label or evidence could not be verified.
QA/QC DisclosedRejected · positive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Reason: The release includes a detailed section on QA/QC procedures, including certified labs, blanks, standards, and duplicates.
Evidence · text
“The Company maintains a rigorous sampling and QA/QC procedure for the 2026 drill program.”
Compositing TransparentRejected · positive
Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Reason: The cut-off grade of 1 g/t Au and maximum 3 metre internal waste for compositing are clearly stated.
Evidence · text
“Composites for significant intersections were calculated using a 1 g/t gold (Au) cut off grade and maximum 3 metre internal waste.”
Apparent Width OnlyRejected · negative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Reason: The document states 'All reported intervals are down-hole lengths, with true width estimates ranging from 50-99% of the reported interval', indicating a specific true width is not provided.
Evidence · text
“All reported intervals are down-hole lengths, with true width estimates ranging from 50-99% of the reported interval.”
P26-2699Premier · zincGrade: 21874Grade Unit: ppmIntercept: 8 mView all detailsHide details
Identity
- Hole ID
- P26-2699
- Project
- Premier
- Commodity
- zinc
- Region
- canada_bc
- Reported Region
- canada_bc
- Ticker
- CAMB.V
Geometry
- Grade
- 21874
- Grade Unit
- ppm
- Intercept
- 8 m
- From
- 213 m
- To
- 221 m
- Hole Depth
- 249 m
- Intercept Depth
- 213 m
Classification
- Program
- mixed
- Sample Type
- drill
- Group ID
- P26-2699:213-221
- Mining Method
- underground
Location
- Easting
- 436791
- Northing
- 6213027
- Elevation
- 451 m
- Azimuth
- 251 °
- Dip
- 50 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Canada Ltd.
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Compositing
- Cutoff Grade
- 1
- Cutoff Unit
- g/t Au
- Max Dilution
- 3 m
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-22T00:00:00.000Z
Reasoning: This intercept shows a weak but continuous zinc grade over a good width, contributing to the overall infill drilling program.
Positive factors
- Weak zinc grade (21874 ppm or ~2.19% Zn) exceeds the weak threshold (20000 ppm or 2% Zn).
- Strong intercept length (8.0 m) indicates good continuity.
Negative factors
- True width is estimated as a percentage range rather than a specific value.
Tags used in scoring
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: The document explicitly states that the results are from an 'ongoing infill drilling program'.
Evidence · text
“ongoing infill drilling program”
Rejected tags
Rejected tags — excluded from scoring because their label or evidence could not be verified.
QA/QC DisclosedRejected · positive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Reason: The release includes a detailed section on QA/QC procedures, including certified labs, blanks, standards, and duplicates.
Evidence · text
“The Company maintains a rigorous sampling and QA/QC procedure for the 2026 drill program.”
Compositing TransparentRejected · positive
Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Reason: The cut-off grade of 1 g/t Au and maximum 3 metre internal waste for compositing are clearly stated.
Evidence · text
“Composites for significant intersections were calculated using a 1 g/t gold (Au) cut off grade and maximum 3 metre internal waste.”
Apparent Width OnlyRejected · negative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Reason: The document states 'All reported intervals are down-hole lengths, with true width estimates ranging from 50-99% of the reported interval', indicating a specific true width is not provided.
Evidence · text
“All reported intervals are down-hole lengths, with true width estimates ranging from 50-99% of the reported interval.”
P26-2699Premier · leadGrade: 1841Grade Unit: ppmIntercept: 8 mView all detailsHide details
Identity
- Hole ID
- P26-2699
- Project
- Premier
- Commodity
- lead
- Region
- canada_bc
- Reported Region
- canada_bc
- Ticker
- CAMB.V
Geometry
- Grade
- 1841
- Grade Unit
- ppm
- Intercept
- 8 m
- From
- 213 m
- To
- 221 m
- Hole Depth
- 249 m
- Intercept Depth
- 213 m
Classification
- Program
- mixed
- Sample Type
- drill
- Group ID
- P26-2699:213-221
- Mining Method
- underground
Location
- Easting
- 436791
- Northing
- 6213027
- Elevation
- 451 m
- Azimuth
- 251 °
- Dip
- 50 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Canada Ltd.
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Compositing
- Cutoff Grade
- 1
- Cutoff Unit
- g/t Au
- Max Dilution
- 3 m
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-22T00:00:00.000Z
Reasoning: This intercept shows a low lead grade over a good width, contributing to the overall infill drilling program but not a highlight.
Positive factors
- The intercept length (8.0 m) indicates good continuity.
Negative factors
- Lead grade (1841 ppm or ~0.18% Pb) is below the weak threshold (10000 ppm or 1% Pb).
- True width is estimated as a percentage range rather than a specific value.
Tags used in scoring
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: The document explicitly states that the results are from an 'ongoing infill drilling program'.
Evidence · text
“ongoing infill drilling program”
Rejected tags
Rejected tags — excluded from scoring because their label or evidence could not be verified.
QA/QC DisclosedRejected · positive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Reason: The release includes a detailed section on QA/QC procedures, including certified labs, blanks, standards, and duplicates.
Evidence · text
“The Company maintains a rigorous sampling and QA/QC procedure for the 2026 drill program.”
Compositing TransparentRejected · positive
Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Reason: The cut-off grade of 1 g/t Au and maximum 3 metre internal waste for compositing are clearly stated.
Evidence · text
“Composites for significant intersections were calculated using a 1 g/t gold (Au) cut off grade and maximum 3 metre internal waste.”
Apparent Width OnlyRejected · negative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Reason: The document states 'All reported intervals are down-hole lengths, with true width estimates ranging from 50-99% of the reported interval', indicating a specific true width is not provided.
Evidence · text
“All reported intervals are down-hole lengths, with true width estimates ranging from 50-99% of the reported interval.”
P26-2701Premier · goldGrade: 2.49Grade Unit: ppmIntercept: 11 mView all detailsHide details
Identity
- Hole ID
- P26-2701
- Project
- Premier
- Commodity
- gold
- Region
- canada_bc
- Reported Region
- canada_bc
- Ticker
- CAMB.V
Geometry
- Grade
- 2.49
- Grade Unit
- ppm
- Intercept
- 11 m
- From
- 199 m
- To
- 210 m
- Hole Depth
- 240 m
- Intercept Depth
- 199 m
Classification
- Program
- mixed
- Sample Type
- drill
- Group ID
- P26-2701:199-210
- Mining Method
- underground
Location
- Easting
- 436795
- Northing
- 6213025
- Elevation
- 451 m
- Azimuth
- 224 °
- Dip
- 47 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Canada Ltd.
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Compositing
- Cutoff Grade
- 1
- Cutoff Unit
- g/t Au
- Max Dilution
- 3 m
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-22T00:00:00.000Z
Reasoning: This intercept shows a low gold grade over a good width, contributing to the overall infill drilling program but not a highlight.
Positive factors
- Strong intercept length (11.0 m) indicates good continuity.
Negative factors
- Gold grade (2.49 ppm) is below the underground weak threshold (2.5 g/t Au).
- True width is estimated as a percentage range rather than a specific value.
Tags used in scoring
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: The document explicitly states that the results are from an 'ongoing infill drilling program'.
Evidence · text
“ongoing infill drilling program”
Rejected tags
Rejected tags — excluded from scoring because their label or evidence could not be verified.
QA/QC DisclosedRejected · positive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Reason: The release includes a detailed section on QA/QC procedures, including certified labs, blanks, standards, and duplicates.
Evidence · text
“The Company maintains a rigorous sampling and QA/QC procedure for the 2026 drill program.”
Compositing TransparentRejected · positive
Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Reason: The cut-off grade of 1 g/t Au and maximum 3 metre internal waste for compositing are clearly stated.
Evidence · text
“Composites for significant intersections were calculated using a 1 g/t gold (Au) cut off grade and maximum 3 metre internal waste.”
Apparent Width OnlyRejected · negative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Reason: The document states 'All reported intervals are down-hole lengths, with true width estimates ranging from 50-99% of the reported interval', indicating a specific true width is not provided.
Evidence · text
“All reported intervals are down-hole lengths, with true width estimates ranging from 50-99% of the reported interval.”
P26-2701Premier · silverGrade: 9.5Grade Unit: ppmIntercept: 11 mView all detailsHide details
Identity
- Hole ID
- P26-2701
- Project
- Premier
- Commodity
- silver
- Region
- canada_bc
- Reported Region
- canada_bc
- Ticker
- CAMB.V
Geometry
- Grade
- 9.5
- Grade Unit
- ppm
- Intercept
- 11 m
- From
- 199 m
- To
- 210 m
- Hole Depth
- 240 m
- Intercept Depth
- 199 m
Classification
- Program
- mixed
- Sample Type
- drill
- Group ID
- P26-2701:199-210
- Mining Method
- underground
Location
- Easting
- 436795
- Northing
- 6213025
- Elevation
- 451 m
- Azimuth
- 224 °
- Dip
- 47 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Canada Ltd.
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Compositing
- Cutoff Grade
- 1
- Cutoff Unit
- g/t Au
- Max Dilution
- 3 m
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-22T00:00:00.000Z
Reasoning: This intercept shows a low silver grade over a good width, contributing to the overall infill drilling program but not a highlight.
Positive factors
- The intercept length (11.0 m) indicates good continuity.
Negative factors
- Silver grade (9.5 ppm) is below the weak threshold (30 g/t Ag).
- True width is estimated as a percentage range rather than a specific value.
Tags used in scoring
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: The document explicitly states that the results are from an 'ongoing infill drilling program'.
Evidence · text
“ongoing infill drilling program”
Rejected tags
Rejected tags — excluded from scoring because their label or evidence could not be verified.
QA/QC DisclosedRejected · positive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Reason: The release includes a detailed section on QA/QC procedures, including certified labs, blanks, standards, and duplicates.
Evidence · text
“The Company maintains a rigorous sampling and QA/QC procedure for the 2026 drill program.”
Compositing TransparentRejected · positive
Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Reason: The cut-off grade of 1 g/t Au and maximum 3 metre internal waste for compositing are clearly stated.
Evidence · text
“Composites for significant intersections were calculated using a 1 g/t gold (Au) cut off grade and maximum 3 metre internal waste.”
Apparent Width OnlyRejected · negative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Reason: The document states 'All reported intervals are down-hole lengths, with true width estimates ranging from 50-99% of the reported interval', indicating a specific true width is not provided.
Evidence · text
“All reported intervals are down-hole lengths, with true width estimates ranging from 50-99% of the reported interval.”
P26-2701Premier · zincGrade: 21450Grade Unit: ppmIntercept: 11 mView all detailsHide details
Identity
- Hole ID
- P26-2701
- Project
- Premier
- Commodity
- zinc
- Region
- canada_bc
- Reported Region
- canada_bc
- Ticker
- CAMB.V
Geometry
- Grade
- 21450
- Grade Unit
- ppm
- Intercept
- 11 m
- From
- 199 m
- To
- 210 m
- Hole Depth
- 240 m
- Intercept Depth
- 199 m
Classification
- Program
- mixed
- Sample Type
- drill
- Group ID
- P26-2701:199-210
- Mining Method
- underground
Location
- Easting
- 436795
- Northing
- 6213025
- Elevation
- 451 m
- Azimuth
- 224 °
- Dip
- 47 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Canada Ltd.
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Compositing
- Cutoff Grade
- 1
- Cutoff Unit
- g/t Au
- Max Dilution
- 3 m
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-22T00:00:00.000Z
Reasoning: This intercept shows a weak but continuous zinc grade over a good width, contributing to the overall infill drilling program.
Positive factors
- Weak zinc grade (21450 ppm or ~2.15% Zn) exceeds the weak threshold (20000 ppm or 2% Zn).
- Strong intercept length (11.0 m) indicates good continuity.
Negative factors
- True width is estimated as a percentage range rather than a specific value.
Tags used in scoring
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: The document explicitly states that the results are from an 'ongoing infill drilling program'.
Evidence · text
“ongoing infill drilling program”
Rejected tags
Rejected tags — excluded from scoring because their label or evidence could not be verified.
QA/QC DisclosedRejected · positive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Reason: The release includes a detailed section on QA/QC procedures, including certified labs, blanks, standards, and duplicates.
Evidence · text
“The Company maintains a rigorous sampling and QA/QC procedure for the 2026 drill program.”
Compositing TransparentRejected · positive
Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Reason: The cut-off grade of 1 g/t Au and maximum 3 metre internal waste for compositing are clearly stated.
Evidence · text
“Composites for significant intersections were calculated using a 1 g/t gold (Au) cut off grade and maximum 3 metre internal waste.”
Apparent Width OnlyRejected · negative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Reason: The document states 'All reported intervals are down-hole lengths, with true width estimates ranging from 50-99% of the reported interval', indicating a specific true width is not provided.
Evidence · text
“All reported intervals are down-hole lengths, with true width estimates ranging from 50-99% of the reported interval.”
P26-2701Premier · leadGrade: 608Grade Unit: ppmIntercept: 11 mView all detailsHide details
Identity
- Hole ID
- P26-2701
- Project
- Premier
- Commodity
- lead
- Region
- canada_bc
- Reported Region
- canada_bc
- Ticker
- CAMB.V
Geometry
- Grade
- 608
- Grade Unit
- ppm
- Intercept
- 11 m
- From
- 199 m
- To
- 210 m
- Hole Depth
- 240 m
- Intercept Depth
- 199 m
Classification
- Program
- mixed
- Sample Type
- drill
- Group ID
- P26-2701:199-210
- Mining Method
- underground
Location
- Easting
- 436795
- Northing
- 6213025
- Elevation
- 451 m
- Azimuth
- 224 °
- Dip
- 47 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Canada Ltd.
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Compositing
- Cutoff Grade
- 1
- Cutoff Unit
- g/t Au
- Max Dilution
- 3 m
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-22T00:00:00.000Z
Reasoning: This intercept shows a low lead grade over a good width, contributing to the overall infill drilling program but not a highlight.
Positive factors
- The intercept length (11.0 m) indicates good continuity.
Negative factors
- Lead grade (608 ppm or ~0.06% Pb) is below the weak threshold (10000 ppm or 1% Pb).
- True width is estimated as a percentage range rather than a specific value.
Tags used in scoring
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: The document explicitly states that the results are from an 'ongoing infill drilling program'.
Evidence · text
“ongoing infill drilling program”
Rejected tags
Rejected tags — excluded from scoring because their label or evidence could not be verified.
QA/QC DisclosedRejected · positive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Reason: The release includes a detailed section on QA/QC procedures, including certified labs, blanks, standards, and duplicates.
Evidence · text
“The Company maintains a rigorous sampling and QA/QC procedure for the 2026 drill program.”
Compositing TransparentRejected · positive
Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Reason: The cut-off grade of 1 g/t Au and maximum 3 metre internal waste for compositing are clearly stated.
Evidence · text
“Composites for significant intersections were calculated using a 1 g/t gold (Au) cut off grade and maximum 3 metre internal waste.”
Apparent Width OnlyRejected · negative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Reason: The document states 'All reported intervals are down-hole lengths, with true width estimates ranging from 50-99% of the reported interval', indicating a specific true width is not provided.
Evidence · text
“All reported intervals are down-hole lengths, with true width estimates ranging from 50-99% of the reported interval.”
P26-2703Premier · goldGrade: 28.73Grade Unit: ppmIntercept: 2.9 mView all detailsHide details
Identity
- Hole ID
- P26-2703
- Project
- Premier
- Commodity
- gold
- Region
- canada_bc
- Reported Region
- canada_bc
- Ticker
- CAMB.V
Geometry
- Grade
- 28.73
- Grade Unit
- ppm
- Intercept
- 2.9 m
- From
- 228.1 m
- To
- 231 m
- Hole Depth
- 248 m
- Intercept Depth
- 228.1 m
Classification
- Program
- mixed
- Sample Type
- drill
- Group ID
- P26-2703:228.1-231
- Mining Method
- underground
Location
- Easting
- 436793
- Northing
- 6213026
- Elevation
- 451 m
- Azimuth
- 237 °
- Dip
- 47 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Canada Ltd.
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Compositing
- Cutoff Grade
- 1
- Cutoff Unit
- g/t Au
- Max Dilution
- 3 m
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-22T00:00:00.000Z
Reasoning: This intercept shows exceptional gold and high silver grades over a narrow but significant width, contributing positively to the infill drilling program.
Positive factors
- Exceptional gold grade (28.73 ppm) significantly exceeds the underground exceptional threshold (15 g/t Au).
- High silver grade (64.6 ppm) exceeds the weak threshold (30 g/t Ag).
- Significant grade-thickness product (83.317 g/t Au·m) is a strong result.
Negative factors
- Narrow intercept length (2.9 m).
- True width is estimated as a percentage range rather than a specific value.
Tags used in scoring
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: The document explicitly states that the results are from an 'ongoing infill drilling program'.
Evidence · text
“ongoing infill drilling program”
Rejected tags
Rejected tags — excluded from scoring because their label or evidence could not be verified.
Bonanza InterceptRejected · positive
Exceptionally high-grade zone, well above the deposit-type norm.
Reason: The gold grade of 28.73 ppm exceeds the underground exceptional threshold of 15 g/t Au.
Evidence · table
“28.73”
Context: 2.9
QA/QC DisclosedRejected · positive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Reason: The release includes a detailed section on QA/QC procedures, including certified labs, blanks, standards, and duplicates.
Evidence · text
“The Company maintains a rigorous sampling and QA/QC procedure for the 2026 drill program.”
Compositing TransparentRejected · positive
Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Reason: The cut-off grade of 1 g/t Au and maximum 3 metre internal waste for compositing are clearly stated.
Evidence · text
“Composites for significant intersections were calculated using a 1 g/t gold (Au) cut off grade and maximum 3 metre internal waste.”
Apparent Width OnlyRejected · negative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Reason: The document states 'All reported intervals are down-hole lengths, with true width estimates ranging from 50-99% of the reported interval', indicating a specific true width is not provided.
Evidence · text
“All reported intervals are down-hole lengths, with true width estimates ranging from 50-99% of the reported interval.”
P26-2703Premier · silverGrade: 64.6Grade Unit: ppmIntercept: 2.9 mView all detailsHide details
Identity
- Hole ID
- P26-2703
- Project
- Premier
- Commodity
- silver
- Region
- canada_bc
- Reported Region
- canada_bc
- Ticker
- CAMB.V
Geometry
- Grade
- 64.6
- Grade Unit
- ppm
- Intercept
- 2.9 m
- From
- 228.1 m
- To
- 231 m
- Hole Depth
- 248 m
- Intercept Depth
- 228.1 m
Classification
- Program
- mixed
- Sample Type
- drill
- Group ID
- P26-2703:228.1-231
- Mining Method
- underground
Location
- Easting
- 436793
- Northing
- 6213026
- Elevation
- 451 m
- Azimuth
- 237 °
- Dip
- 47 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Canada Ltd.
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Compositing
- Cutoff Grade
- 1
- Cutoff Unit
- g/t Au
- Max Dilution
- 3 m
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-22T00:00:00.000Z
Reasoning: This intercept shows moderate silver and exceptional gold grades over a narrow but significant width, contributing positively to the infill drilling program.
Positive factors
- Moderate silver grade (64.6 ppm) exceeds the weak threshold (30 g/t Ag).
- Exceptional gold grade (28.73 ppm) exceeds the underground exceptional threshold (15 g/t Au).
Negative factors
- Narrow intercept length (2.9 m).
- True width is estimated as a percentage range rather than a specific value.
Tags used in scoring
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: The document explicitly states that the results are from an 'ongoing infill drilling program'.
Evidence · text
“ongoing infill drilling program”
Rejected tags
Rejected tags — excluded from scoring because their label or evidence could not be verified.
QA/QC DisclosedRejected · positive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Reason: The release includes a detailed section on QA/QC procedures, including certified labs, blanks, standards, and duplicates.
Evidence · text
“The Company maintains a rigorous sampling and QA/QC procedure for the 2026 drill program.”
Compositing TransparentRejected · positive
Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Reason: The cut-off grade of 1 g/t Au and maximum 3 metre internal waste for compositing are clearly stated.
Evidence · text
“Composites for significant intersections were calculated using a 1 g/t gold (Au) cut off grade and maximum 3 metre internal waste.”
Apparent Width OnlyRejected · negative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Reason: The document states 'All reported intervals are down-hole lengths, with true width estimates ranging from 50-99% of the reported interval', indicating a specific true width is not provided.
Evidence · text
“All reported intervals are down-hole lengths, with true width estimates ranging from 50-99% of the reported interval.”
P26-2703Premier · zincGrade: 61145Grade Unit: ppmIntercept: 2.9 mView all detailsHide details
Identity
- Hole ID
- P26-2703
- Project
- Premier
- Commodity
- zinc
- Region
- canada_bc
- Reported Region
- canada_bc
- Ticker
- CAMB.V
Geometry
- Grade
- 61145
- Grade Unit
- ppm
- Intercept
- 2.9 m
- From
- 228.1 m
- To
- 231 m
- Hole Depth
- 248 m
- Intercept Depth
- 228.1 m
Classification
- Program
- mixed
- Sample Type
- drill
- Group ID
- P26-2703:228.1-231
- Mining Method
- underground
Location
- Easting
- 436793
- Northing
- 6213026
- Elevation
- 451 m
- Azimuth
- 237 °
- Dip
- 47 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Canada Ltd.
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Compositing
- Cutoff Grade
- 1
- Cutoff Unit
- g/t Au
- Max Dilution
- 3 m
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-22T00:00:00.000Z
Reasoning: This intercept shows moderate zinc and exceptional gold grades over a narrow but significant width, contributing positively to the infill drilling program.
Positive factors
- Moderate zinc grade (61145 ppm or ~6.11% Zn) exceeds the moderate threshold (50000 ppm or 5% Zn).
- Exceptional gold grade (28.73 ppm) exceeds the underground exceptional threshold (15 g/t Au).
Negative factors
- Narrow intercept length (2.9 m).
- True width is estimated as a percentage range rather than a specific value.
Tags used in scoring
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: The document explicitly states that the results are from an 'ongoing infill drilling program'.
Evidence · text
“ongoing infill drilling program”
Rejected tags
Rejected tags — excluded from scoring because their label or evidence could not be verified.
QA/QC DisclosedRejected · positive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Reason: The release includes a detailed section on QA/QC procedures, including certified labs, blanks, standards, and duplicates.
Evidence · text
“The Company maintains a rigorous sampling and QA/QC procedure for the 2026 drill program.”
Compositing TransparentRejected · positive
Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Reason: The cut-off grade of 1 g/t Au and maximum 3 metre internal waste for compositing are clearly stated.
Evidence · text
“Composites for significant intersections were calculated using a 1 g/t gold (Au) cut off grade and maximum 3 metre internal waste.”
Apparent Width OnlyRejected · negative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Reason: The document states 'All reported intervals are down-hole lengths, with true width estimates ranging from 50-99% of the reported interval', indicating a specific true width is not provided.
Evidence · text
“All reported intervals are down-hole lengths, with true width estimates ranging from 50-99% of the reported interval.”
P26-2703Premier · leadGrade: 18848Grade Unit: ppmIntercept: 2.9 mView all detailsHide details
Identity
- Hole ID
- P26-2703
- Project
- Premier
- Commodity
- lead
- Region
- canada_bc
- Reported Region
- canada_bc
- Ticker
- CAMB.V
Geometry
- Grade
- 18848
- Grade Unit
- ppm
- Intercept
- 2.9 m
- From
- 228.1 m
- To
- 231 m
- Hole Depth
- 248 m
- Intercept Depth
- 228.1 m
Classification
- Program
- mixed
- Sample Type
- drill
- Group ID
- P26-2703:228.1-231
- Mining Method
- underground
Location
- Easting
- 436793
- Northing
- 6213026
- Elevation
- 451 m
- Azimuth
- 237 °
- Dip
- 47 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Canada Ltd.
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Compositing
- Cutoff Grade
- 1
- Cutoff Unit
- g/t Au
- Max Dilution
- 3 m
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-22T00:00:00.000Z
Reasoning: This intercept shows a weak lead and exceptional gold grades over a narrow but significant width, contributing positively to the infill drilling program.
Positive factors
- Weak lead grade (18848 ppm or ~1.88% Pb) exceeds the weak threshold (10000 ppm or 1% Pb).
- Exceptional gold grade (28.73 ppm) exceeds the underground exceptional threshold (15 g/t Au).
Negative factors
- Narrow intercept length (2.9 m).
- True width is estimated as a percentage range rather than a specific value.
Tags used in scoring
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: The document explicitly states that the results are from an 'ongoing infill drilling program'.
Evidence · text
“ongoing infill drilling program”
Rejected tags
Rejected tags — excluded from scoring because their label or evidence could not be verified.
QA/QC DisclosedRejected · positive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Reason: The release includes a detailed section on QA/QC procedures, including certified labs, blanks, standards, and duplicates.
Evidence · text
“The Company maintains a rigorous sampling and QA/QC procedure for the 2026 drill program.”
Compositing TransparentRejected · positive
Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Reason: The cut-off grade of 1 g/t Au and maximum 3 metre internal waste for compositing are clearly stated.
Evidence · text
“Composites for significant intersections were calculated using a 1 g/t gold (Au) cut off grade and maximum 3 metre internal waste.”
Apparent Width OnlyRejected · negative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Reason: The document states 'All reported intervals are down-hole lengths, with true width estimates ranging from 50-99% of the reported interval', indicating a specific true width is not provided.
Evidence · text
“All reported intervals are down-hole lengths, with true width estimates ranging from 50-99% of the reported interval.”
P26-2703Premier · goldGrade: 42.96Grade Unit: g/tIntercept: 1.9 mView all detailsHide details
Identity
- Hole ID
- P26-2703
- Project
- Premier
- Commodity
- gold
- Region
- canada_bc
- Reported Region
- canada_bc
- Ticker
- CAMB.V
Geometry
- Grade
- 42.96
- Grade Unit
- g/t
- Intercept
- 1.9 m
- Hole Depth
- 248 m
Classification
- Program
- mixed
- Sample Type
- drill
- Group ID
- P26-2703:228.1-231.0
- Mining Method
- underground
Location
- Easting
- 436793
- Northing
- 6213026
- Elevation
- 451 m
- Azimuth
- 237 °
- Dip
- 47 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Canada Ltd.
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Compositing
- Cutoff Grade
- 10
- Cutoff Unit
- g/t Au
- Max Dilution
- 3 m
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-22T00:00:00.000Z
Reasoning: This sub-interval shows exceptional gold and high silver grades, highlighting a very rich zone within the broader intercept, despite its narrow width.
Positive factors
- Exceptional gold grade (42.96 g/t Au) significantly exceeds the underground exceptional threshold (15 g/t Au).
- High silver grade (93 g/t Ag) approaches the moderate threshold (100 g/t Ag).
- This is a high-grade sub-interval within a broader significant intercept, indicating very rich mineralization.
Negative factors
- Narrow intercept length (1.9 m).
- True width is estimated as a percentage range rather than a specific value.
Tags used in scoring
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: The document explicitly states that the results are from an 'ongoing infill drilling program'.
Evidence · text
“ongoing infill drilling program”
Rejected tags
Rejected tags — excluded from scoring because their label or evidence could not be verified.
Bonanza InterceptRejected · positive
Exceptionally high-grade zone, well above the deposit-type norm.
Reason: The gold grade of 42.96 g/t exceeds the underground exceptional threshold of 15 g/t Au.
Evidence · table
“42.96 g/t Au & 93 g/t Ag over 1.9m”
Context: 2.9
QA/QC DisclosedRejected · positive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Reason: The release includes a detailed section on QA/QC procedures, including certified labs, blanks, standards, and duplicates.
Evidence · text
“The Company maintains a rigorous sampling and QA/QC procedure for the 2026 drill program.”
Compositing TransparentRejected · positive
Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Reason: The cut-off grade of 10 g/t Au and maximum 3 metre internal waste for compositing are clearly stated for 'including' intervals.
Evidence · text
““Including” results are reported at a 10 g/t Au cut off grade with maximum 3 metre internal waste.”
Apparent Width OnlyRejected · negative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Reason: The document states 'All reported intervals are down-hole lengths, with true width estimates ranging from 50-99% of the reported interval', indicating a specific true width is not provided.
Evidence · text
“All reported intervals are down-hole lengths, with true width estimates ranging from 50-99% of the reported interval.”
P26-2703Premier · silverGrade: 93Grade Unit: g/tIntercept: 1.9 mView all detailsHide details
Identity
- Hole ID
- P26-2703
- Project
- Premier
- Commodity
- silver
- Region
- canada_bc
- Reported Region
- canada_bc
- Ticker
- CAMB.V
Geometry
- Grade
- 93
- Grade Unit
- g/t
- Intercept
- 1.9 m
- Hole Depth
- 248 m
Classification
- Program
- mixed
- Sample Type
- drill
- Group ID
- P26-2703:228.1-231.0
- Mining Method
- underground
Location
- Easting
- 436793
- Northing
- 6213026
- Elevation
- 451 m
- Azimuth
- 237 °
- Dip
- 47 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Canada Ltd.
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Compositing
- Cutoff Grade
- 10
- Cutoff Unit
- g/t Au
- Max Dilution
- 3 m
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-22T00:00:00.000Z
Reasoning: This sub-interval shows moderate silver and exceptional gold grades, highlighting a very rich zone within the broader intercept, despite its narrow width.
Positive factors
- Moderate silver grade (93 g/t Ag) approaches the moderate threshold (100 g/t Ag).
- Exceptional gold grade (42.96 g/t Au) exceeds the underground exceptional threshold (15 g/t Au).
- This is a high-grade sub-interval within a broader significant intercept, indicating very rich mineralization.
Negative factors
- Narrow intercept length (1.9 m).
- True width is estimated as a percentage range rather than a specific value.
Tags used in scoring
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: The document explicitly states that the results are from an 'ongoing infill drilling program'.
Evidence · text
“ongoing infill drilling program”
Rejected tags
Rejected tags — excluded from scoring because their label or evidence could not be verified.
QA/QC DisclosedRejected · positive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Reason: The release includes a detailed section on QA/QC procedures, including certified labs, blanks, standards, and duplicates.
Evidence · text
“The Company maintains a rigorous sampling and QA/QC procedure for the 2026 drill program.”
Compositing TransparentRejected · positive
Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Reason: The cut-off grade of 10 g/t Au and maximum 3 metre internal waste for compositing are clearly stated for 'including' intervals.
Evidence · text
““Including” results are reported at a 10 g/t Au cut off grade with maximum 3 metre internal waste.”
Apparent Width OnlyRejected · negative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Reason: The document states 'All reported intervals are down-hole lengths, with true width estimates ranging from 50-99% of the reported interval', indicating a specific true width is not provided.
Evidence · text
“All reported intervals are down-hole lengths, with true width estimates ranging from 50-99% of the reported interval.”
P26-2705Premier · goldGrade: 36.7Grade Unit: ppmIntercept: 0.9 mView all detailsHide details
Identity
- Hole ID
- P26-2705
- Project
- Premier
- Commodity
- gold
- Region
- canada_bc
- Reported Region
- canada_bc
- Ticker
- CAMB.V
Geometry
- Grade
- 36.7
- Grade Unit
- ppm
- Intercept
- 0.9 m
- From
- 259.2 m
- To
- 260.1 m
- Hole Depth
- 338 m
- Intercept Depth
- 259.2 m
Classification
- Program
- mixed
- Sample Type
- drill
- Group ID
- P26-2705:259.2-260.1
- Mining Method
- underground
Location
- Easting
- 436832
- Northing
- 6212647
- Elevation
- 555 m
- Azimuth
- 164 °
- Dip
- 67 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Canada Ltd.
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Compositing
- Cutoff Grade
- 1
- Cutoff Unit
- g/t Au
- Max Dilution
- 3 m
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-22T00:00:00.000Z
Reasoning: This intercept shows exceptional gold grades over a narrow but significant width, contributing positively to the infill drilling program.
Positive factors
- Exceptional gold grade (36.7 ppm) significantly exceeds the underground exceptional threshold (15 g/t Au).
- High silver grade (22.6 ppm) approaches the weak threshold (30 g/t Ag).
Negative factors
- Narrow intercept length (0.9 m).
- True width is estimated as a percentage range rather than a specific value.
Tags used in scoring
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: The document explicitly states that the results are from an 'ongoing infill drilling program'.
Evidence · text
“ongoing infill drilling program”
Rejected tags
Rejected tags — excluded from scoring because their label or evidence could not be verified.
Bonanza InterceptRejected · positive
Exceptionally high-grade zone, well above the deposit-type norm.
Reason: The gold grade of 36.7 ppm exceeds the underground exceptional threshold of 15 g/t Au.
Evidence · table
“36.70”
Context: 0.9
QA/QC DisclosedRejected · positive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Reason: The release includes a detailed section on QA/QC procedures, including certified labs, blanks, standards, and duplicates.
Evidence · text
“The Company maintains a rigorous sampling and QA/QC procedure for the 2026 drill program.”
Compositing TransparentRejected · positive
Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Reason: The cut-off grade of 1 g/t Au and maximum 3 metre internal waste for compositing are clearly stated.
Evidence · text
“Composites for significant intersections were calculated using a 1 g/t gold (Au) cut off grade and maximum 3 metre internal waste.”
Apparent Width OnlyRejected · negative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Reason: The document states 'All reported intervals are down-hole lengths, with true width estimates ranging from 50-99% of the reported interval', indicating a specific true width is not provided.
Evidence · text
“All reported intervals are down-hole lengths, with true width estimates ranging from 50-99% of the reported interval.”
P26-2705Premier · silverGrade: 22.6Grade Unit: ppmIntercept: 0.9 mView all detailsHide details
Identity
- Hole ID
- P26-2705
- Project
- Premier
- Commodity
- silver
- Region
- canada_bc
- Reported Region
- canada_bc
- Ticker
- CAMB.V
Geometry
- Grade
- 22.6
- Grade Unit
- ppm
- Intercept
- 0.9 m
- From
- 259.2 m
- To
- 260.1 m
- Hole Depth
- 338 m
- Intercept Depth
- 259.2 m
Classification
- Program
- mixed
- Sample Type
- drill
- Group ID
- P26-2705:259.2-260.1
- Mining Method
- underground
Location
- Easting
- 436832
- Northing
- 6212647
- Elevation
- 555 m
- Azimuth
- 164 °
- Dip
- 67 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Canada Ltd.
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Compositing
- Cutoff Grade
- 1
- Cutoff Unit
- g/t Au
- Max Dilution
- 3 m
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-22T00:00:00.000Z
Reasoning: This intercept shows a low silver grade over a narrow width, but is part of a high-grade gold intercept, contributing to the overall infill drilling program.
Positive factors
- Exceptional gold grade (36.7 ppm) exceeds the underground exceptional threshold (15 g/t Au).
Negative factors
- Silver grade (22.6 ppm) is below the weak threshold (30 g/t Ag).
- Narrow intercept length (0.9 m).
- True width is estimated as a percentage range rather than a specific value.
Tags used in scoring
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: The document explicitly states that the results are from an 'ongoing infill drilling program'.
Evidence · text
“ongoing infill drilling program”
Rejected tags
Rejected tags — excluded from scoring because their label or evidence could not be verified.
QA/QC DisclosedRejected · positive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Reason: The release includes a detailed section on QA/QC procedures, including certified labs, blanks, standards, and duplicates.
Evidence · text
“The Company maintains a rigorous sampling and QA/QC procedure for the 2026 drill program.”
Compositing TransparentRejected · positive
Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Reason: The cut-off grade of 1 g/t Au and maximum 3 metre internal waste for compositing are clearly stated.
Evidence · text
“Composites for significant intersections were calculated using a 1 g/t gold (Au) cut off grade and maximum 3 metre internal waste.”
Apparent Width OnlyRejected · negative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Reason: The document states 'All reported intervals are down-hole lengths, with true width estimates ranging from 50-99% of the reported interval', indicating a specific true width is not provided.
Evidence · text
“All reported intervals are down-hole lengths, with true width estimates ranging from 50-99% of the reported interval.”
P26-2705Premier · zincGrade: 5480Grade Unit: ppmIntercept: 0.9 mView all detailsHide details
Identity
- Hole ID
- P26-2705
- Project
- Premier
- Commodity
- zinc
- Region
- canada_bc
- Reported Region
- canada_bc
- Ticker
- CAMB.V
Geometry
- Grade
- 5480
- Grade Unit
- ppm
- Intercept
- 0.9 m
- From
- 259.2 m
- To
- 260.1 m
- Hole Depth
- 338 m
- Intercept Depth
- 259.2 m
Classification
- Program
- mixed
- Sample Type
- drill
- Group ID
- P26-2705:259.2-260.1
- Mining Method
- underground
Location
- Easting
- 436832
- Northing
- 6212647
- Elevation
- 555 m
- Azimuth
- 164 °
- Dip
- 67 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Canada Ltd.
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Compositing
- Cutoff Grade
- 1
- Cutoff Unit
- g/t Au
- Max Dilution
- 3 m
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-22T00:00:00.000Z
Reasoning: This intercept shows a low zinc grade over a narrow width, but is part of a high-grade gold intercept, contributing to the overall infill drilling program.
Positive factors
- Exceptional gold grade (36.7 ppm) exceeds the underground exceptional threshold (15 g/t Au).
Negative factors
- Zinc grade (5480 ppm or ~0.55% Zn) is below the weak threshold (20000 ppm or 2% Zn).
- Narrow intercept length (0.9 m).
- True width is estimated as a percentage range rather than a specific value.
Tags used in scoring
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: The document explicitly states that the results are from an 'ongoing infill drilling program'.
Evidence · text
“ongoing infill drilling program”
Rejected tags
Rejected tags — excluded from scoring because their label or evidence could not be verified.
QA/QC DisclosedRejected · positive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Reason: The release includes a detailed section on QA/QC procedures, including certified labs, blanks, standards, and duplicates.
Evidence · text
“The Company maintains a rigorous sampling and QA/QC procedure for the 2026 drill program.”
Compositing TransparentRejected · positive
Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Reason: The cut-off grade of 1 g/t Au and maximum 3 metre internal waste for compositing are clearly stated.
Evidence · text
“Composites for significant intersections were calculated using a 1 g/t gold (Au) cut off grade and maximum 3 metre internal waste.”
Apparent Width OnlyRejected · negative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Reason: The document states 'All reported intervals are down-hole lengths, with true width estimates ranging from 50-99% of the reported interval', indicating a specific true width is not provided.
Evidence · text
“All reported intervals are down-hole lengths, with true width estimates ranging from 50-99% of the reported interval.”
P26-2705Premier · leadGrade: 1750Grade Unit: ppmIntercept: 0.9 mView all detailsHide details
Identity
- Hole ID
- P26-2705
- Project
- Premier
- Commodity
- lead
- Region
- canada_bc
- Reported Region
- canada_bc
- Ticker
- CAMB.V
Geometry
- Grade
- 1750
- Grade Unit
- ppm
- Intercept
- 0.9 m
- From
- 259.2 m
- To
- 260.1 m
- Hole Depth
- 338 m
- Intercept Depth
- 259.2 m
Classification
- Program
- mixed
- Sample Type
- drill
- Group ID
- P26-2705:259.2-260.1
- Mining Method
- underground
Location
- Easting
- 436832
- Northing
- 6212647
- Elevation
- 555 m
- Azimuth
- 164 °
- Dip
- 67 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Canada Ltd.
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Compositing
- Cutoff Grade
- 1
- Cutoff Unit
- g/t Au
- Max Dilution
- 3 m
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-22T00:00:00.000Z
Reasoning: This intercept shows a low lead grade over a narrow width, but is part of a high-grade gold intercept, contributing to the overall infill drilling program.
Positive factors
- Exceptional gold grade (36.7 ppm) exceeds the underground exceptional threshold (15 g/t Au).
Negative factors
- Lead grade (1750 ppm or ~0.18% Pb) is below the weak threshold (10000 ppm or 1% Pb).
- Narrow intercept length (0.9 m).
- True width is estimated as a percentage range rather than a specific value.
Tags used in scoring
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: The document explicitly states that the results are from an 'ongoing infill drilling program'.
Evidence · text
“ongoing infill drilling program”
Rejected tags
Rejected tags — excluded from scoring because their label or evidence could not be verified.
QA/QC DisclosedRejected · positive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Reason: The release includes a detailed section on QA/QC procedures, including certified labs, blanks, standards, and duplicates.
Evidence · text
“The Company maintains a rigorous sampling and QA/QC procedure for the 2026 drill program.”
Compositing TransparentRejected · positive
Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Reason: The cut-off grade of 1 g/t Au and maximum 3 metre internal waste for compositing are clearly stated.
Evidence · text
“Composites for significant intersections were calculated using a 1 g/t gold (Au) cut off grade and maximum 3 metre internal waste.”
Apparent Width OnlyRejected · negative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Reason: The document states 'All reported intervals are down-hole lengths, with true width estimates ranging from 50-99% of the reported interval', indicating a specific true width is not provided.
Evidence · text
“All reported intervals are down-hole lengths, with true width estimates ranging from 50-99% of the reported interval.”
P26-2705Premier · goldGrade: 18.26Grade Unit: ppmIntercept: 9.2 mView all detailsHide details
Identity
- Hole ID
- P26-2705
- Project
- Premier
- Commodity
- gold
- Region
- canada_bc
- Reported Region
- canada_bc
- Ticker
- CAMB.V
Geometry
- Grade
- 18.26
- Grade Unit
- ppm
- Intercept
- 9.2 m
- From
- 267.2 m
- To
- 276.4 m
- Hole Depth
- 338 m
- Intercept Depth
- 267.2 m
Classification
- Program
- mixed
- Sample Type
- drill
- Group ID
- P26-2705:267.2-276.4
- Mining Method
- underground
Location
- Easting
- 436832
- Northing
- 6212647
- Elevation
- 555 m
- Azimuth
- 164 °
- Dip
- 67 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Canada Ltd.
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Compositing
- Cutoff Grade
- 1
- Cutoff Unit
- g/t Au
- Max Dilution
- 3 m
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-22T00:00:00.000Z
Reasoning: This intercept shows exceptional gold grades over a strong width, extending mineralization beyond historic workings, which is a very positive indicator for resource expansion.
Positive factors
- Exceptional gold grade (18.26 ppm) exceeds the underground exceptional threshold (15 g/t Au).
- Strong intercept length (9.2 m) indicates good continuity.
- Significant grade-thickness product (167.992 g/t Au·m) is a strong result.
- The intercept extends mineralization 10 meters beyond historic workings, indicating potential for expansion.
Negative factors
- True width is estimated as a percentage range rather than a specific value.
Tags used in scoring
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: The document explicitly states that the results are from an 'ongoing infill drilling program'.
Evidence · text
“ongoing infill drilling program”
Rejected tags
Rejected tags — excluded from scoring because their label or evidence could not be verified.
Bonanza InterceptRejected · positive
Exceptionally high-grade zone, well above the deposit-type norm.
Reason: The gold grade of 18.26 ppm exceeds the underground exceptional threshold of 15 g/t Au.
Evidence · table
“18.26”
Context: 9.2
Step-Out ExtensionRejected · positive
Mineralization extended beyond the previously known limit.
Reason: The intercept is described as 'ten metres beyond the end of the historic workings', indicating an extension of known mineralization.
Evidence · text
“ten metres beyond the end of the historic workings”
QA/QC DisclosedRejected · positive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Reason: The release includes a detailed section on QA/QC procedures, including certified labs, blanks, standards, and duplicates.
Evidence · text
“The Company maintains a rigorous sampling and QA/QC procedure for the 2026 drill program.”
Compositing TransparentRejected · positive
Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Reason: The cut-off grade of 1 g/t Au and maximum 3 metre internal waste for compositing are clearly stated.
Evidence · text
“Composites for significant intersections were calculated using a 1 g/t gold (Au) cut off grade and maximum 3 metre internal waste.”
Apparent Width OnlyRejected · negative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Reason: The document states 'All reported intervals are down-hole lengths, with true width estimates ranging from 50-99% of the reported interval', indicating a specific true width is not provided.
Evidence · text
“All reported intervals are down-hole lengths, with true width estimates ranging from 50-99% of the reported interval.”
P26-2705Premier · silverGrade: 34.3Grade Unit: ppmIntercept: 9.2 mView all detailsHide details
Identity
- Hole ID
- P26-2705
- Project
- Premier
- Commodity
- silver
- Region
- canada_bc
- Reported Region
- canada_bc
- Ticker
- CAMB.V
Geometry
- Grade
- 34.3
- Grade Unit
- ppm
- Intercept
- 9.2 m
- From
- 267.2 m
- To
- 276.4 m
- Hole Depth
- 338 m
- Intercept Depth
- 267.2 m
Classification
- Program
- mixed
- Sample Type
- drill
- Group ID
- P26-2705:267.2-276.4
- Mining Method
- underground
Location
- Easting
- 436832
- Northing
- 6212647
- Elevation
- 555 m
- Azimuth
- 164 °
- Dip
- 67 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Canada Ltd.
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Compositing
- Cutoff Grade
- 1
- Cutoff Unit
- g/t Au
- Max Dilution
- 3 m
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-22T00:00:00.000Z
Reasoning: This intercept shows moderate silver grades over a strong width, contributing to the overall positive results and extending mineralization beyond historic workings.
Positive factors
- Moderate silver grade (34.3 ppm) exceeds the weak threshold (30 g/t Ag).
- Strong intercept length (9.2 m) indicates good continuity.
- The intercept extends mineralization 10 meters beyond historic workings, indicating potential for expansion.
Negative factors
- True width is estimated as a percentage range rather than a specific value.
Tags used in scoring
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: The document explicitly states that the results are from an 'ongoing infill drilling program'.
Evidence · text
“ongoing infill drilling program”
Rejected tags
Rejected tags — excluded from scoring because their label or evidence could not be verified.
Step-Out ExtensionRejected · positive
Mineralization extended beyond the previously known limit.
Reason: The intercept is described as 'ten metres beyond the end of the historic workings', indicating an extension of known mineralization.
Evidence · text
“ten metres beyond the end of the historic workings”
QA/QC DisclosedRejected · positive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Reason: The release includes a detailed section on QA/QC procedures, including certified labs, blanks, standards, and duplicates.
Evidence · text
“The Company maintains a rigorous sampling and QA/QC procedure for the 2026 drill program.”
Compositing TransparentRejected · positive
Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Reason: The cut-off grade of 1 g/t Au and maximum 3 metre internal waste for compositing are clearly stated.
Evidence · text
“Composites for significant intersections were calculated using a 1 g/t gold (Au) cut off grade and maximum 3 metre internal waste.”
Apparent Width OnlyRejected · negative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Reason: The document states 'All reported intervals are down-hole lengths, with true width estimates ranging from 50-99% of the reported interval', indicating a specific true width is not provided.
Evidence · text
“All reported intervals are down-hole lengths, with true width estimates ranging from 50-99% of the reported interval.”
P26-2705Premier · zincGrade: 12825Grade Unit: ppmIntercept: 9.2 mView all detailsHide details
Identity
- Hole ID
- P26-2705
- Project
- Premier
- Commodity
- zinc
- Region
- canada_bc
- Reported Region
- canada_bc
- Ticker
- CAMB.V
Geometry
- Grade
- 12825
- Grade Unit
- ppm
- Intercept
- 9.2 m
- From
- 267.2 m
- To
- 276.4 m
- Hole Depth
- 338 m
- Intercept Depth
- 267.2 m
Classification
- Program
- mixed
- Sample Type
- drill
- Group ID
- P26-2705:267.2-276.4
- Mining Method
- underground
Location
- Easting
- 436832
- Northing
- 6212647
- Elevation
- 555 m
- Azimuth
- 164 °
- Dip
- 67 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Canada Ltd.
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Compositing
- Cutoff Grade
- 1
- Cutoff Unit
- g/t Au
- Max Dilution
- 3 m
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-22T00:00:00.000Z
Reasoning: This intercept shows a low zinc grade over a strong width, contributing to the overall infill drilling program and extending mineralization beyond historic workings.
Positive factors
- Strong intercept length (9.2 m) indicates good continuity.
- The intercept extends mineralization 10 meters beyond historic workings, indicating potential for expansion.
Negative factors
- Zinc grade (12825 ppm or ~1.28% Zn) is below the weak threshold (20000 ppm or 2% Zn).
- True width is estimated as a percentage range rather than a specific value.
Tags used in scoring
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: The document explicitly states that the results are from an 'ongoing infill drilling program'.
Evidence · text
“ongoing infill drilling program”
Rejected tags
Rejected tags — excluded from scoring because their label or evidence could not be verified.
Step-Out ExtensionRejected · positive
Mineralization extended beyond the previously known limit.
Reason: The intercept is described as 'ten metres beyond the end of the historic workings', indicating an extension of known mineralization.
Evidence · text
“ten metres beyond the end of the historic workings”
QA/QC DisclosedRejected · positive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Reason: The release includes a detailed section on QA/QC procedures, including certified labs, blanks, standards, and duplicates.
Evidence · text
“The Company maintains a rigorous sampling and QA/QC procedure for the 2026 drill program.”
Compositing TransparentRejected · positive
Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Reason: The cut-off grade of 1 g/t Au and maximum 3 metre internal waste for compositing are clearly stated.
Evidence · text
“Composites for significant intersections were calculated using a 1 g/t gold (Au) cut off grade and maximum 3 metre internal waste.”
Apparent Width OnlyRejected · negative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Reason: The document states 'All reported intervals are down-hole lengths, with true width estimates ranging from 50-99% of the reported interval', indicating a specific true width is not provided.
Evidence · text
“All reported intervals are down-hole lengths, with true width estimates ranging from 50-99% of the reported interval.”
P26-2705Premier · leadGrade: 8881Grade Unit: ppmIntercept: 9.2 mView all detailsHide details
Identity
- Hole ID
- P26-2705
- Project
- Premier
- Commodity
- lead
- Region
- canada_bc
- Reported Region
- canada_bc
- Ticker
- CAMB.V
Geometry
- Grade
- 8881
- Grade Unit
- ppm
- Intercept
- 9.2 m
- From
- 267.2 m
- To
- 276.4 m
- Hole Depth
- 338 m
- Intercept Depth
- 267.2 m
Classification
- Program
- mixed
- Sample Type
- drill
- Group ID
- P26-2705:267.2-276.4
- Mining Method
- underground
Location
- Easting
- 436832
- Northing
- 6212647
- Elevation
- 555 m
- Azimuth
- 164 °
- Dip
- 67 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Canada Ltd.
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Compositing
- Cutoff Grade
- 1
- Cutoff Unit
- g/t Au
- Max Dilution
- 3 m
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-22T00:00:00.000Z
Reasoning: This intercept shows a low lead grade over a strong width, contributing to the overall infill drilling program and extending mineralization beyond historic workings.
Positive factors
- Strong intercept length (9.2 m) indicates good continuity.
- The intercept extends mineralization 10 meters beyond historic workings, indicating potential for expansion.
Negative factors
- Lead grade (8881 ppm or ~0.89% Pb) is below the weak threshold (10000 ppm or 1% Pb).
- True width is estimated as a percentage range rather than a specific value.
Tags used in scoring
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: The document explicitly states that the results are from an 'ongoing infill drilling program'.
Evidence · text
“ongoing infill drilling program”
Rejected tags
Rejected tags — excluded from scoring because their label or evidence could not be verified.
Step-Out ExtensionRejected · positive
Mineralization extended beyond the previously known limit.
Reason: The intercept is described as 'ten metres beyond the end of the historic workings', indicating an extension of known mineralization.
Evidence · text
“ten metres beyond the end of the historic workings”
QA/QC DisclosedRejected · positive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Reason: The release includes a detailed section on QA/QC procedures, including certified labs, blanks, standards, and duplicates.
Evidence · text
“The Company maintains a rigorous sampling and QA/QC procedure for the 2026 drill program.”
Compositing TransparentRejected · positive
Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Reason: The cut-off grade of 1 g/t Au and maximum 3 metre internal waste for compositing are clearly stated.
Evidence · text
“Composites for significant intersections were calculated using a 1 g/t gold (Au) cut off grade and maximum 3 metre internal waste.”
Apparent Width OnlyRejected · negative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Reason: The document states 'All reported intervals are down-hole lengths, with true width estimates ranging from 50-99% of the reported interval', indicating a specific true width is not provided.
Evidence · text
“All reported intervals are down-hole lengths, with true width estimates ranging from 50-99% of the reported interval.”
P26-2705Premier · goldGrade: 33.5Grade Unit: g/tIntercept: 4.6 mView all detailsHide details
Identity
- Hole ID
- P26-2705
- Project
- Premier
- Commodity
- gold
- Region
- canada_bc
- Reported Region
- canada_bc
- Ticker
- CAMB.V
Geometry
- Grade
- 33.5
- Grade Unit
- g/t
- Intercept
- 4.6 m
- Hole Depth
- 338 m
Classification
- Program
- mixed
- Sample Type
- drill
- Group ID
- P26-2705:267.2-276.4
- Mining Method
- underground
Location
- Easting
- 436832
- Northing
- 6212647
- Elevation
- 555 m
- Azimuth
- 164 °
- Dip
- 67 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Canada Ltd.
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Compositing
- Cutoff Grade
- 10
- Cutoff Unit
- g/t Au
- Max Dilution
- 3 m
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-22T00:00:00.000Z
Reasoning: This sub-interval shows exceptional gold and high silver grades over a good width, highlighting a very rich zone within the broader intercept.
Positive factors
- Exceptional gold grade (33.5 g/t Au) significantly exceeds the underground exceptional threshold (15 g/t Au).
- High silver grade (48 g/t Ag) exceeds the weak threshold (30 g/t Ag).
- Significant grade-thickness product (154.1 g/t Au·m) is a strong result.
- This is a high-grade sub-interval within a broader significant intercept, indicating very rich mineralization.
Negative factors
- True width is estimated as a percentage range rather than a specific value.
Tags used in scoring
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: The document explicitly states that the results are from an 'ongoing infill drilling program'.
Evidence · text
“ongoing infill drilling program”
Rejected tags
Rejected tags — excluded from scoring because their label or evidence could not be verified.
Bonanza InterceptRejected · positive
Exceptionally high-grade zone, well above the deposit-type norm.
Reason: The gold grade of 33.5 g/t exceeds the underground exceptional threshold of 15 g/t Au.
Evidence · table
“33.5 g/t Au & 48 g/t Ag over 4.6m”
Context: 9.2
QA/QC DisclosedRejected · positive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Reason: The release includes a detailed section on QA/QC procedures, including certified labs, blanks, standards, and duplicates.
Evidence · text
“The Company maintains a rigorous sampling and QA/QC procedure for the 2026 drill program.”
Compositing TransparentRejected · positive
Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Reason: The cut-off grade of 10 g/t Au and maximum 3 metre internal waste for compositing are clearly stated for 'including' intervals.
Evidence · text
““Including” results are reported at a 10 g/t Au cut off grade with maximum 3 metre internal waste.”
Apparent Width OnlyRejected · negative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Reason: The document states 'All reported intervals are down-hole lengths, with true width estimates ranging from 50-99% of the reported interval', indicating a specific true width is not provided.
Evidence · text
“All reported intervals are down-hole lengths, with true width estimates ranging from 50-99% of the reported interval.”
P26-2705Premier · silverGrade: 48Grade Unit: g/tIntercept: 4.6 mView all detailsHide details
Identity
- Hole ID
- P26-2705
- Project
- Premier
- Commodity
- silver
- Region
- canada_bc
- Reported Region
- canada_bc
- Ticker
- CAMB.V
Geometry
- Grade
- 48
- Grade Unit
- g/t
- Intercept
- 4.6 m
- Hole Depth
- 338 m
Classification
- Program
- mixed
- Sample Type
- drill
- Group ID
- P26-2705:267.2-276.4
- Mining Method
- underground
Location
- Easting
- 436832
- Northing
- 6212647
- Elevation
- 555 m
- Azimuth
- 164 °
- Dip
- 67 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Canada Ltd.
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Compositing
- Cutoff Grade
- 10
- Cutoff Unit
- g/t Au
- Max Dilution
- 3 m
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-22T00:00:00.000Z
Reasoning: This sub-interval shows moderate silver and exceptional gold grades over a good width, highlighting a very rich zone within the broader intercept.
Positive factors
- Moderate silver grade (48 g/t Ag) exceeds the weak threshold (30 g/t Ag).
- Exceptional gold grade (33.5 g/t Au) exceeds the underground exceptional threshold (15 g/t Au).
- Significant grade-thickness product (220.8 g/t Ag·m) is a strong result.
- This is a high-grade sub-interval within a broader significant intercept, indicating very rich mineralization.
Negative factors
- True width is estimated as a percentage range rather than a specific value.
Tags used in scoring
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: The document explicitly states that the results are from an 'ongoing infill drilling program'.
Evidence · text
“ongoing infill drilling program”
Rejected tags
Rejected tags — excluded from scoring because their label or evidence could not be verified.
QA/QC DisclosedRejected · positive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Reason: The release includes a detailed section on QA/QC procedures, including certified labs, blanks, standards, and duplicates.
Evidence · text
“The Company maintains a rigorous sampling and QA/QC procedure for the 2026 drill program.”
Compositing TransparentRejected · positive
Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Reason: The cut-off grade of 10 g/t Au and maximum 3 metre internal waste for compositing are clearly stated for 'including' intervals.
Evidence · text
““Including” results are reported at a 10 g/t Au cut off grade with maximum 3 metre internal waste.”
Apparent Width OnlyRejected · negative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Reason: The document states 'All reported intervals are down-hole lengths, with true width estimates ranging from 50-99% of the reported interval', indicating a specific true width is not provided.
Evidence · text
“All reported intervals are down-hole lengths, with true width estimates ranging from 50-99% of the reported interval.”
P26U-0039Premier · goldGrade: 7.92Grade Unit: ppmIntercept: 6.7 mView all detailsHide details
Identity
- Hole ID
- P26U-0039
- Project
- Premier
- Commodity
- gold
- Region
- canada_bc
- Reported Region
- canada_bc
- Ticker
- CAMB.V
Geometry
- Grade
- 7.92
- Grade Unit
- ppm
- Intercept
- 6.7 m
- From
- 24 m
- To
- 30.7 m
- Hole Depth
- 56 m
- Intercept Depth
- 24 m
Classification
- Program
- mixed
- Sample Type
- drill
- Group ID
- P26U-0039:24-30.7
- Mining Method
- underground
Location
- Easting
- 437199
- Northing
- 6213100
- Elevation
- 314 m
- Azimuth
- 135 °
- Dip
- 65 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Canada Ltd.
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Compositing
- Cutoff Grade
- 1
- Cutoff Unit
- g/t Au
- Max Dilution
- 3 m
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-22T00:00:00.000Z
Reasoning: This intercept shows strong gold grades over a moderate width, contributing positively to the infill drilling program.
Positive factors
- Strong gold grade (7.92 ppm) exceeds the underground strong threshold (7 g/t Au).
- Moderate intercept length (6.7 m) indicates good continuity.
Negative factors
- True width is estimated as a percentage range rather than a specific value.
Tags used in scoring
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: The document explicitly states that the results are from an 'ongoing infill drilling program'.
Evidence · text
“ongoing infill drilling program”
Rejected tags
Rejected tags — excluded from scoring because their label or evidence could not be verified.
QA/QC DisclosedRejected · positive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Reason: The release includes a detailed section on QA/QC procedures, including certified labs, blanks, standards, and duplicates.
Evidence · text
“The Company maintains a rigorous sampling and QA/QC procedure for the 2026 drill program.”
Compositing TransparentRejected · positive
Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Reason: The cut-off grade of 1 g/t Au and maximum 3 metre internal waste for compositing are clearly stated.
Evidence · text
“Composites for significant intersections were calculated using a 1 g/t gold (Au) cut off grade and maximum 3 metre internal waste.”
Apparent Width OnlyRejected · negative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Reason: The document states 'All reported intervals are down-hole lengths, with true width estimates ranging from 50-99% of the reported interval', indicating a specific true width is not provided.
Evidence · text
“All reported intervals are down-hole lengths, with true width estimates ranging from 50-99% of the reported interval.”
P26U-0039Premier · silverGrade: 12.9Grade Unit: ppmIntercept: 6.7 mView all detailsHide details
Identity
- Hole ID
- P26U-0039
- Project
- Premier
- Commodity
- silver
- Region
- canada_bc
- Reported Region
- canada_bc
- Ticker
- CAMB.V
Geometry
- Grade
- 12.9
- Grade Unit
- ppm
- Intercept
- 6.7 m
- From
- 24 m
- To
- 30.7 m
- Hole Depth
- 56 m
- Intercept Depth
- 24 m
Classification
- Program
- mixed
- Sample Type
- drill
- Group ID
- P26U-0039:24-30.7
- Mining Method
- underground
Location
- Easting
- 437199
- Northing
- 6213100
- Elevation
- 314 m
- Azimuth
- 135 °
- Dip
- 65 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Canada Ltd.
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Compositing
- Cutoff Grade
- 1
- Cutoff Unit
- g/t Au
- Max Dilution
- 3 m
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-22T00:00:00.000Z
Reasoning: This intercept shows a low silver grade over a moderate width, contributing to the overall infill drilling program but not a highlight.
Positive factors
- Moderate intercept length (6.7 m) indicates good continuity.
Negative factors
- Silver grade (12.9 ppm) is below the weak threshold (30 g/t Ag).
- True width is estimated as a percentage range rather than a specific value.
Tags used in scoring
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: The document explicitly states that the results are from an 'ongoing infill drilling program'.
Evidence · text
“ongoing infill drilling program”
Rejected tags
Rejected tags — excluded from scoring because their label or evidence could not be verified.
QA/QC DisclosedRejected · positive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Reason: The release includes a detailed section on QA/QC procedures, including certified labs, blanks, standards, and duplicates.
Evidence · text
“The Company maintains a rigorous sampling and QA/QC procedure for the 2026 drill program.”
Compositing TransparentRejected · positive
Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Reason: The cut-off grade of 1 g/t Au and maximum 3 metre internal waste for compositing are clearly stated.
Evidence · text
“Composites for significant intersections were calculated using a 1 g/t gold (Au) cut off grade and maximum 3 metre internal waste.”
Apparent Width OnlyRejected · negative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Reason: The document states 'All reported intervals are down-hole lengths, with true width estimates ranging from 50-99% of the reported interval', indicating a specific true width is not provided.
Evidence · text
“All reported intervals are down-hole lengths, with true width estimates ranging from 50-99% of the reported interval.”
P26U-0039Premier · zincGrade: 1708Grade Unit: ppmIntercept: 6.7 mView all detailsHide details
Identity
- Hole ID
- P26U-0039
- Project
- Premier
- Commodity
- zinc
- Region
- canada_bc
- Reported Region
- canada_bc
- Ticker
- CAMB.V
Geometry
- Grade
- 1708
- Grade Unit
- ppm
- Intercept
- 6.7 m
- From
- 24 m
- To
- 30.7 m
- Hole Depth
- 56 m
- Intercept Depth
- 24 m
Classification
- Program
- mixed
- Sample Type
- drill
- Group ID
- P26U-0039:24-30.7
- Mining Method
- underground
Location
- Easting
- 437199
- Northing
- 6213100
- Elevation
- 314 m
- Azimuth
- 135 °
- Dip
- 65 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Canada Ltd.
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Compositing
- Cutoff Grade
- 1
- Cutoff Unit
- g/t Au
- Max Dilution
- 3 m
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-22T00:00:00.000Z
Reasoning: This intercept shows a low zinc grade over a moderate width, contributing to the overall infill drilling program but not a highlight.
Positive factors
- Moderate intercept length (6.7 m) indicates good continuity.
Negative factors
- Zinc grade (1708 ppm or ~0.17% Zn) is below the weak threshold (20000 ppm or 2% Zn).
- True width is estimated as a percentage range rather than a specific value.
Tags used in scoring
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: The document explicitly states that the results are from an 'ongoing infill drilling program'.
Evidence · text
“ongoing infill drilling program”
Rejected tags
Rejected tags — excluded from scoring because their label or evidence could not be verified.
QA/QC DisclosedRejected · positive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Reason: The release includes a detailed section on QA/QC procedures, including certified labs, blanks, standards, and duplicates.
Evidence · text
“The Company maintains a rigorous sampling and QA/QC procedure for the 2026 drill program.”
Compositing TransparentRejected · positive
Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Reason: The cut-off grade of 1 g/t Au and maximum 3 metre internal waste for compositing are clearly stated.
Evidence · text
“Composites for significant intersections were calculated using a 1 g/t gold (Au) cut off grade and maximum 3 metre internal waste.”
Apparent Width OnlyRejected · negative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Reason: The document states 'All reported intervals are down-hole lengths, with true width estimates ranging from 50-99% of the reported interval', indicating a specific true width is not provided.
Evidence · text
“All reported intervals are down-hole lengths, with true width estimates ranging from 50-99% of the reported interval.”
P26U-0039Premier · leadGrade: 772Grade Unit: ppmIntercept: 6.7 mView all detailsHide details
Identity
- Hole ID
- P26U-0039
- Project
- Premier
- Commodity
- lead
- Region
- canada_bc
- Reported Region
- canada_bc
- Ticker
- CAMB.V
Geometry
- Grade
- 772
- Grade Unit
- ppm
- Intercept
- 6.7 m
- From
- 24 m
- To
- 30.7 m
- Hole Depth
- 56 m
- Intercept Depth
- 24 m
Classification
- Program
- mixed
- Sample Type
- drill
- Group ID
- P26U-0039:24-30.7
- Mining Method
- underground
Location
- Easting
- 437199
- Northing
- 6213100
- Elevation
- 314 m
- Azimuth
- 135 °
- Dip
- 65 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Canada Ltd.
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Compositing
- Cutoff Grade
- 1
- Cutoff Unit
- g/t Au
- Max Dilution
- 3 m
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-22T00:00:00.000Z
Reasoning: This intercept shows a low lead grade over a moderate width, contributing to the overall infill drilling program but not a highlight.
Positive factors
- Moderate intercept length (6.7 m) indicates good continuity.
Negative factors
- Lead grade (772 ppm or ~0.08% Pb) is below the weak threshold (10000 ppm or 1% Pb).
- True width is estimated as a percentage range rather than a specific value.
Tags used in scoring
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: The document explicitly states that the results are from an 'ongoing infill drilling program'.
Evidence · text
“ongoing infill drilling program”
Rejected tags
Rejected tags — excluded from scoring because their label or evidence could not be verified.
QA/QC DisclosedRejected · positive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Reason: The release includes a detailed section on QA/QC procedures, including certified labs, blanks, standards, and duplicates.
Evidence · text
“The Company maintains a rigorous sampling and QA/QC procedure for the 2026 drill program.”
Compositing TransparentRejected · positive
Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Reason: The cut-off grade of 1 g/t Au and maximum 3 metre internal waste for compositing are clearly stated.
Evidence · text
“Composites for significant intersections were calculated using a 1 g/t gold (Au) cut off grade and maximum 3 metre internal waste.”
Apparent Width OnlyRejected · negative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Reason: The document states 'All reported intervals are down-hole lengths, with true width estimates ranging from 50-99% of the reported interval', indicating a specific true width is not provided.
Evidence · text
“All reported intervals are down-hole lengths, with true width estimates ranging from 50-99% of the reported interval.”
P26U-0039Premier · goldGrade: 45.9Grade Unit: g/tIntercept: 1 mView all detailsHide details
Identity
- Hole ID
- P26U-0039
- Project
- Premier
- Commodity
- gold
- Region
- canada_bc
- Reported Region
- canada_bc
- Ticker
- CAMB.V
Geometry
- Grade
- 45.9
- Grade Unit
- g/t
- Intercept
- 1 m
- Hole Depth
- 56 m
Classification
- Program
- mixed
- Sample Type
- drill
- Group ID
- P26U-0039:24.0-30.7
- Mining Method
- underground
Location
- Easting
- 437199
- Northing
- 6213100
- Elevation
- 314 m
- Azimuth
- 135 °
- Dip
- 65 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Canada Ltd.
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Compositing
- Cutoff Grade
- 10
- Cutoff Unit
- g/t Au
- Max Dilution
- 3 m
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-22T00:00:00.000Z
Reasoning: This sub-interval shows exceptional gold and high silver grades, highlighting a very rich zone within the broader intercept, despite its narrow width.
Positive factors
- Exceptional gold grade (45.9 g/t Au) significantly exceeds the underground exceptional threshold (15 g/t Au).
- High silver grade (51 g/t Ag) exceeds the weak threshold (30 g/t Ag).
- This is a high-grade sub-interval within a broader significant intercept, indicating very rich mineralization.
Negative factors
- Narrow intercept length (1.0 m).
- True width is estimated as a percentage range rather than a specific value.
Tags used in scoring
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: The document explicitly states that the results are from an 'ongoing infill drilling program'.
Evidence · text
“ongoing infill drilling program”
Rejected tags
Rejected tags — excluded from scoring because their label or evidence could not be verified.
Bonanza InterceptRejected · positive
Exceptionally high-grade zone, well above the deposit-type norm.
Reason: The gold grade of 45.9 g/t exceeds the underground exceptional threshold of 15 g/t Au.
Evidence · table
“i45.9 g/t Au & 51 g/t Ag over 1m”
Context: 6.7
QA/QC DisclosedRejected · positive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Reason: The release includes a detailed section on QA/QC procedures, including certified labs, blanks, standards, and duplicates.
Evidence · text
“The Company maintains a rigorous sampling and QA/QC procedure for the 2026 drill program.”
Compositing TransparentRejected · positive
Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Reason: The cut-off grade of 10 g/t Au and maximum 3 metre internal waste for compositing are clearly stated for 'including' intervals.
Evidence · text
““Including” results are reported at a 10 g/t Au cut off grade with maximum 3 metre internal waste.”
Apparent Width OnlyRejected · negative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Reason: The document states 'All reported intervals are down-hole lengths, with true width estimates ranging from 50-99% of the reported interval', indicating a specific true width is not provided.
Evidence · text
“All reported intervals are down-hole lengths, with true width estimates ranging from 50-99% of the reported interval.”
P26U-0039Premier · silverGrade: 51Grade Unit: g/tIntercept: 1 mView all detailsHide details
Identity
- Hole ID
- P26U-0039
- Project
- Premier
- Commodity
- silver
- Region
- canada_bc
- Reported Region
- canada_bc
- Ticker
- CAMB.V
Geometry
- Grade
- 51
- Grade Unit
- g/t
- Intercept
- 1 m
- Hole Depth
- 56 m
Classification
- Program
- mixed
- Sample Type
- drill
- Group ID
- P26U-0039:24.0-30.7
- Mining Method
- underground
Location
- Easting
- 437199
- Northing
- 6213100
- Elevation
- 314 m
- Azimuth
- 135 °
- Dip
- 65 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Canada Ltd.
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Compositing
- Cutoff Grade
- 10
- Cutoff Unit
- g/t Au
- Max Dilution
- 3 m
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-22T00:00:00.000Z
Reasoning: This sub-interval shows high silver and exceptional gold grades, highlighting a very rich zone within the broader intercept, despite its narrow width.
Positive factors
- High silver grade (51 g/t Ag) exceeds the weak threshold (30 g/t Ag).
- Exceptional gold grade (45.9 g/t Au) exceeds the underground exceptional threshold (15 g/t Au).
- This is a high-grade sub-interval within a broader significant intercept, indicating very rich mineralization.
Negative factors
- Narrow intercept length (1.0 m).
- True width is estimated as a percentage range rather than a specific value.
Tags used in scoring
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: The document explicitly states that the results are from an 'ongoing infill drilling program'.
Evidence · text
“ongoing infill drilling program”
Rejected tags
Rejected tags — excluded from scoring because their label or evidence could not be verified.
QA/QC DisclosedRejected · positive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Reason: The release includes a detailed section on QA/QC procedures, including certified labs, blanks, standards, and duplicates.
Evidence · text
“The Company maintains a rigorous sampling and QA/QC procedure for the 2026 drill program.”
Compositing TransparentRejected · positive
Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Reason: The cut-off grade of 10 g/t Au and maximum 3 metre internal waste for compositing are clearly stated for 'including' intervals.
Evidence · text
““Including” results are reported at a 10 g/t Au cut off grade with maximum 3 metre internal waste.”
Apparent Width OnlyRejected · negative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Reason: The document states 'All reported intervals are down-hole lengths, with true width estimates ranging from 50-99% of the reported interval', indicating a specific true width is not provided.
Evidence · text
“All reported intervals are down-hole lengths, with true width estimates ranging from 50-99% of the reported interval.”
P26U-0040Premier · goldGrade: 9.95Grade Unit: ppmIntercept: 3.5 mView all detailsHide details
Identity
- Hole ID
- P26U-0040
- Project
- Premier
- Commodity
- gold
- Region
- canada_bc
- Reported Region
- canada_bc
- Ticker
- CAMB.V
Geometry
- Grade
- 9.95
- Grade Unit
- ppm
- Intercept
- 3.5 m
- From
- 22 m
- To
- 25.5 m
- Hole Depth
- 264.5 m
- Intercept Depth
- 22 m
Classification
- Program
- mixed
- Sample Type
- drill
- Group ID
- P26U-0040:22-25.5
- Mining Method
- underground
Location
- Easting
- 437199
- Northing
- 6213099
- Elevation
- 315 m
- Azimuth
- 133 °
- Dip
- 50 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Canada Ltd.
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Compositing
- Cutoff Grade
- 1
- Cutoff Unit
- g/t Au
- Max Dilution
- 3 m
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-22T00:00:00.000Z
Positive factors
- Strong gold grade (9.95 ppm) exceeds the underground strong threshold (7 g/t Au).
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
How Atlas produces this analysis
Minestarters Atlas uses automated extraction to summarize mining announcements, identify reported measurements, and classify supporting evidence. Sentiment reflects the extracted narrative and classification rules; it is an interpretation, not a reported measurement. Evidence quotes and context are provided where available. Missing data, low-confidence results, and review flags indicate limitations. Check the original publisher announcement before relying on an interpretation.