Brixton Metals Reports Consistent Silver Grades Across All 85 Holes from Maiden Tailings Drill Program at the Langis Silver Project
Original announcement by globenewswire on
- Company
- Brixton Metals Corporation
- Ticker
- BBB
- Exchange
- Unavailable
- Region
- Ontario, Canada
- Primary commodity
- Silver
- Secondary commodities
- None reported
- Document categories
- Drill results, Metallurgy
- Extracted
- 2026-09-08 12:37:24 UTC
Analysis by Minestarters Atlas
Minestarters Atlas analysis
Summary
Brixton Metals Corporation reported consistent high-grade silver results from its maiden 85-hole sonic drill program at the Langis Silver Project tailings in Ontario, Canada. All holes intersected silver-mineralized tailings, with a length-weighted average of 61.7 g/t silver and individual intercepts up to 810 g/t silver over 0.50 meters. The company is now proceeding with metallurgical test work and a maiden Mineral Resource Estimate, leveraging the project's existing infrastructure and the new Ontario Recovery of Minerals regulation.
Reasoning: The maiden tailings drill program at Langis Silver Project delivered highly consistent and strong silver grades across all 85 holes, including bonanza-grade intercepts, which significantly de-risks the project and supports the ongoing metallurgical test work and maiden Mineral Resource Estimate. The project's location within a well-serviced mining district and the explicit reporting of true thickness further enhance the positive outlook.
Positive factors
- Maiden drill program returned consistent and high-grade silver intercepts across all 85 holes
- All holes intersected silver-mineralized tailings material
- High-grade intercepts up to 810 g/t silver
- True thickness reported for all intervals
- Metallurgical test work and resource modeling are underway
- Project benefits from existing infrastructure and new streamlined permitting for tailings reprocessing
Negative factors
- Two areas could not be drilled due to ground conditions, potentially limiting initial resource scope
Low confidence — this extraction should be reviewed alongside the original source.
Facts used in scoring: 89
Classification and evidence
Bonanza Interceptpositive
Exceptionally high-grade zone, well above the deposit-type norm.
Why it applies: The intercept in hole LT-26-051 returned 810 g/t silver over 0.50 m, which is well above the exceptional threshold for silver (>=500 g/t).
Evidence · table
“810.00”
Context: 0.50
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: The document explicitly states that 'Reported intervals represent the full mineralized tailings thickness intersected in each hole (true thickness)'.
Evidence · text
“Reported intervals represent the full mineralized tailings thickness intersected in each hole (true thickness)”
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: The release includes a detailed 'Quality Assurance and Quality Control' section, mentioning ALS Laboratories Inc. as an ISO 17025 accredited lab, insertion of CRMs and blanks, pulp repeats, and umpire samples to Bureau Veritas.
Evidence · text
“Quality Assurance and Quality Control Tailings core is collected by four-inch diameter continuous sonic coring. The full sample is submitted to ALS Laboratories Inc. (“ALS”) in Sudbury, ON, where it is dried to a maximum temperature of 60 degrees Celsius, crushed to -2 mm, pulverized to be sieved through a -75 µm screen, and riffle-split to a 250 g homogenized minus-fraction charge. A 50 g charge is analyzed for silver by four-acid digestion with ICP-AES finish. Samples returning values above 100 g/t silver are re-analyzed by fire assay with a gravimetric finish. ALS is an ISO 17025 accredited laboratory. Rejects representing half of each sample are retained and composited for metallurgical test work, which is being conducted by SGS Canada Inc. (“SGS”). Umpire samples are submitted to Bureau Veritas Commodities Canada Ltd. (“Bureau Veritas”) for routine third-party verification. Brixton inserts independent certified reference material and blanks into the sample stream and assays routine pulp repeats at a rate of 15% as part of its quality assurance and quality control protocols.”
Compositing Transparentpositive
Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Why it applies: The document states that 'No cutoff grade has been applied; all assay intervals within each hole were composited over the full sampled tailings interval, and every hole drilled is reported'.
Evidence · text
“No cutoff grade has been applied; all assay intervals within each hole were composited over the full sampled tailings interval, and every hole drilled is reported.”
Maiden Resourceneutral · Story-specific tag
First formal MRE for the project — establishes baseline but typically exploration-stage with high Inferred component.
Why it applies: The company's objective is 'defining a maiden Mineral Resource Estimate' and this is a 'maiden tailings drill program'.
Evidence · text
“defining a maiden Mineral Resource Estimate”
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: The program comprised '85 sonic drill holes distributed across the mapped extent of the historic tailings on a nominal 40 m by 40 m grid', which is characteristic of infill drilling for characterization.
Evidence · text
“85 sonic drill holes distributed across the mapped extent of the historic tailings on a nominal 40 m by 40 m grid”
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: The release highlights that 'Langis sits in a well-serviced mining district in Canada, with highway, rail access and power, which is a meaningful advantage for any future recovery and reprocessing operation'.
Evidence · text
“Langis sits in a well-serviced mining district in Canada, with highway, rail access and power, which is a meaningful advantage for any future recovery and reprocessing operation.”
Metallurgical Test Work Underwayneutral · Story-specific tag
No canonical definition is currently available.
Why it applies: The document explicitly states that 'Metallurgical test work and resource modelling are underway' and 'Metallurgical test work is in progress on representative composite samples'.
Evidence · text
“Metallurgical test work and Mineral Resource Estimate modelling are underway.”
Mill Routeneutral
Processing via mill or concentrator (CIL, CIP, tank leach, flotation).
Why it applies: the document describes a mill_cil route ("CIL")
Extracted facts
Stored fact records: 89. Some facts used in scoring do not have a stored record.
Drill Results (89)
LT-26-001Langis · silverGrade: 49.13Grade Unit: g/tIntercept: 3 mView all detailsHide details
Identity
- Hole ID
- LT-26-001
- Project
- Langis
- Commodity
- silver
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- BBB
Geometry
- Grade
- 49.13
- Grade Unit
- g/t
- Intercept
- 3 m
- True Width
- 3 m
- From
- 0 m
- To
- 3 m
- Hole Depth
- 3.05 m
- Intercept Depth
- 0 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- LT-26-001:0-3
Location
- Easting
- 606527
- Northing
- 5270639
- CRS
- NAD83 UTM Zone 17N
- EPSG
- 26917
- Elevation
- 193 m
- Azimuth
- 0 °
- Dip
- -90 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Laboratories Inc.
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-08T00:00:00.000Z
Reasoning: This intercept shows a moderate silver grade over a good width for a tailings project, contributing to the overall consistent grade profile and supporting the maiden resource estimate.
Positive factors
- Consistent silver grade for tailings project
- True width disclosed
- Maiden drill program
- QA/QC disclosed
Evidence · table
“49.13”
Context: 3.00
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 3
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "Links: https://brixtonmetals.com/wp-content/uploads/2026/09/Figure-1_8Sept2026.png https://brixtonmetals.com/wp-content/"
LT-26-002Langis · silverGrade: 37.6Grade Unit: g/tIntercept: 1.1 mView all detailsHide details
Identity
- Hole ID
- LT-26-002
- Project
- Langis
- Commodity
- silver
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- BBB
Geometry
- Grade
- 37.6
- Grade Unit
- g/t
- Intercept
- 1.1 m
- True Width
- 1.1 m
- From
- 0 m
- To
- 1.1 m
- Hole Depth
- 3.05 m
- Intercept Depth
- 0 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- LT-26-002:0-1.1
Location
- Easting
- 606487
- Northing
- 5270646
- CRS
- NAD83 UTM Zone 17N
- EPSG
- 26917
- Elevation
- 192 m
- Azimuth
- 0 °
- Dip
- -90 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Laboratories Inc.
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-08T00:00:00.000Z
Reasoning: This intercept shows a weak to moderate silver grade, consistent with the overall grade profile of the tailings, supporting the maiden resource estimate.
Positive factors
- Consistent silver grade for tailings project
- True width disclosed
- Maiden drill program
- QA/QC disclosed
Evidence · table
“37.60”
Context: 1.10
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 1.1
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "Links: https://brixtonmetals.com/wp-content/uploads/2026/09/Figure-1_8Sept2026.png https://brixtonmetals.com/wp-content/"
LT-26-003Langis · silverGrade: 39.95Grade Unit: g/tIntercept: 1.2 mView all detailsHide details
Identity
- Hole ID
- LT-26-003
- Project
- Langis
- Commodity
- silver
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- BBB
Geometry
- Grade
- 39.95
- Grade Unit
- g/t
- Intercept
- 1.2 m
- True Width
- 1.2 m
- From
- 0 m
- To
- 1.2 m
- Hole Depth
- 3.05 m
- Intercept Depth
- 0 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- LT-26-003:0-1.2
Location
- Easting
- 606447
- Northing
- 5270651
- CRS
- NAD83 UTM Zone 17N
- EPSG
- 26917
- Elevation
- 192 m
- Azimuth
- 0 °
- Dip
- -90 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Laboratories Inc.
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-08T00:00:00.000Z
Reasoning: This intercept shows a weak to moderate silver grade, consistent with the overall grade profile of the tailings, supporting the maiden resource estimate.
Positive factors
- Consistent silver grade for tailings project
- True width disclosed
- Maiden drill program
- QA/QC disclosed
Evidence · table
“39.95”
Context: 1.20
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 1.2
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "Links: https://brixtonmetals.com/wp-content/uploads/2026/09/Figure-1_8Sept2026.png https://brixtonmetals.com/wp-content/"
LT-26-004Langis · silverGrade: 38Grade Unit: g/tIntercept: 0.4 mView all detailsHide details
Identity
- Hole ID
- LT-26-004
- Project
- Langis
- Commodity
- silver
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- BBB
Geometry
- Grade
- 38
- Grade Unit
- g/t
- Intercept
- 0.4 m
- True Width
- 0.4 m
- From
- 0 m
- To
- 0.4 m
- Hole Depth
- 3.05 m
- Intercept Depth
- 0 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- LT-26-004:0-0.4
Location
- Easting
- 606407
- Northing
- 5270653
- CRS
- NAD83 UTM Zone 17N
- EPSG
- 26917
- Elevation
- 191 m
- Azimuth
- 0 °
- Dip
- -90 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Laboratories Inc.
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-08T00:00:00.000Z
Reasoning: This intercept shows a weak to moderate silver grade over a short width, consistent with the overall grade profile of the tailings, supporting the maiden resource estimate.
Positive factors
- Consistent silver grade for tailings project
- True width disclosed
- Maiden drill program
- QA/QC disclosed
Evidence · table
“38.00”
Context: 0.40
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 0.4
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "Links: https://brixtonmetals.com/wp-content/uploads/2026/09/Figure-1_8Sept2026.png https://brixtonmetals.com/wp-content/"
LT-26-005Langis · silverGrade: 41.85Grade Unit: g/tIntercept: 0.8 mView all detailsHide details
Identity
- Hole ID
- LT-26-005
- Project
- Langis
- Commodity
- silver
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- BBB
Geometry
- Grade
- 41.85
- Grade Unit
- g/t
- Intercept
- 0.8 m
- True Width
- 0.8 m
- From
- 0 m
- To
- 0.8 m
- Hole Depth
- 3.05 m
- Intercept Depth
- 0 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- LT-26-005:0-0.8
Location
- Easting
- 606370
- Northing
- 5270657
- CRS
- NAD83 UTM Zone 17N
- EPSG
- 26917
- Elevation
- 193 m
- Azimuth
- 0 °
- Dip
- -90 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Laboratories Inc.
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-08T00:00:00.000Z
Reasoning: This intercept shows a weak to moderate silver grade over a short width, consistent with the overall grade profile of the tailings, supporting the maiden resource estimate.
Positive factors
- Consistent silver grade for tailings project
- True width disclosed
- Maiden drill program
- QA/QC disclosed
Evidence · table
“41.85”
Context: 0.80
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 0.8
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "Links: https://brixtonmetals.com/wp-content/uploads/2026/09/Figure-1_8Sept2026.png https://brixtonmetals.com/wp-content/"
LT-26-006Langis · silverGrade: 46.9Grade Unit: g/tIntercept: 0.2 mView all detailsHide details
Identity
- Hole ID
- LT-26-006
- Project
- Langis
- Commodity
- silver
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- BBB
Geometry
- Grade
- 46.9
- Grade Unit
- g/t
- Intercept
- 0.2 m
- True Width
- 0.2 m
- From
- 0 m
- To
- 0.2 m
- Hole Depth
- 3.05 m
- Intercept Depth
- 0 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- LT-26-006:0-0.2
Location
- Easting
- 606356
- Northing
- 5270619
- CRS
- NAD83 UTM Zone 17N
- EPSG
- 26917
- Elevation
- 191 m
- Azimuth
- 0 °
- Dip
- -90 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Laboratories Inc.
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-08T00:00:00.000Z
Reasoning: This intercept shows a weak to moderate silver grade over a very short width, consistent with the overall grade profile of the tailings, supporting the maiden resource estimate.
Positive factors
- Consistent silver grade for tailings project
- True width disclosed
- Maiden drill program
- QA/QC disclosed
Evidence · table
“46.90”
Context: 0.20
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 0.2
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "Links: https://brixtonmetals.com/wp-content/uploads/2026/09/Figure-1_8Sept2026.png https://brixtonmetals.com/wp-content/"
LT-26-007Langis · silverGrade: 45.3Grade Unit: g/tIntercept: 0.9 mView all detailsHide details
Identity
- Hole ID
- LT-26-007
- Project
- Langis
- Commodity
- silver
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- BBB
Geometry
- Grade
- 45.3
- Grade Unit
- g/t
- Intercept
- 0.9 m
- True Width
- 0.9 m
- From
- 0 m
- To
- 0.9 m
- Hole Depth
- 3.05 m
- Intercept Depth
- 0 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- LT-26-007:0-0.9
Location
- Easting
- 606396
- Northing
- 5270618
- CRS
- NAD83 UTM Zone 17N
- EPSG
- 26917
- Elevation
- 193 m
- Azimuth
- 0 °
- Dip
- -90 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Laboratories Inc.
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-08T00:00:00.000Z
Reasoning: This intercept shows a weak to moderate silver grade over a short width, consistent with the overall grade profile of the tailings, supporting the maiden resource estimate.
Positive factors
- Consistent silver grade for tailings project
- True width disclosed
- Maiden drill program
- QA/QC disclosed
Evidence · table
“45.30”
Context: 0.90
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 0.9
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "Links: https://brixtonmetals.com/wp-content/uploads/2026/09/Figure-1_8Sept2026.png https://brixtonmetals.com/wp-content/"
LT-26-008Langis · silverGrade: 48.24Grade Unit: g/tIntercept: 1.9 mView all detailsHide details
Identity
- Hole ID
- LT-26-008
- Project
- Langis
- Commodity
- silver
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- BBB
Geometry
- Grade
- 48.24
- Grade Unit
- g/t
- Intercept
- 1.9 m
- True Width
- 1.9 m
- From
- 0 m
- To
- 1.9 m
- Hole Depth
- 3.05 m
- Intercept Depth
- 0 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- LT-26-008:0-1.9
Location
- Easting
- 606436
- Northing
- 5270613
- CRS
- NAD83 UTM Zone 17N
- EPSG
- 26917
- Elevation
- 196 m
- Azimuth
- 0 °
- Dip
- -90 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Laboratories Inc.
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-08T00:00:00.000Z
Reasoning: This intercept shows a moderate silver grade over a good width for a tailings project, contributing to the overall consistent grade profile and supporting the maiden resource estimate.
Positive factors
- Consistent silver grade for tailings project
- True width disclosed
- Maiden drill program
- QA/QC disclosed
Evidence · table
“48.24”
Context: 1.90
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 1.9
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "Links: https://brixtonmetals.com/wp-content/uploads/2026/09/Figure-1_8Sept2026.png https://brixtonmetals.com/wp-content/"
LT-26-009Langis · silverGrade: 48.09Grade Unit: g/tIntercept: 1.75 mView all detailsHide details
Identity
- Hole ID
- LT-26-009
- Project
- Langis
- Commodity
- silver
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- BBB
Geometry
- Grade
- 48.09
- Grade Unit
- g/t
- Intercept
- 1.75 m
- True Width
- 1.75 m
- From
- 0 m
- To
- 1.75 m
- Hole Depth
- 3.05 m
- Intercept Depth
- 0 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- LT-26-009:0-1.75
Location
- Easting
- 606476
- Northing
- 5270610
- CRS
- NAD83 UTM Zone 17N
- EPSG
- 26917
- Elevation
- 196 m
- Azimuth
- 0 °
- Dip
- -90 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Laboratories Inc.
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-08T00:00:00.000Z
Reasoning: This intercept shows a moderate silver grade over a good width for a tailings project, contributing to the overall consistent grade profile and supporting the maiden resource estimate.
Positive factors
- Consistent silver grade for tailings project
- True width disclosed
- Maiden drill program
- QA/QC disclosed
Evidence · table
“48.09”
Context: 1.75
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 1.75
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "Links: https://brixtonmetals.com/wp-content/uploads/2026/09/Figure-1_8Sept2026.png https://brixtonmetals.com/wp-content/"
LT-26-010Langis · silverGrade: 79.53Grade Unit: g/tIntercept: 2.25 mView all detailsHide details
Identity
- Hole ID
- LT-26-010
- Project
- Langis
- Commodity
- silver
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- BBB
Geometry
- Grade
- 79.53
- Grade Unit
- g/t
- Intercept
- 2.25 m
- True Width
- 2.25 m
- From
- 0 m
- To
- 2.25 m
- Hole Depth
- 4.57 m
- Intercept Depth
- 0 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- LT-26-010:0-2.25
Location
- Easting
- 606520
- Northing
- 5270604
- CRS
- NAD83 UTM Zone 17N
- EPSG
- 26917
- Elevation
- 197 m
- Azimuth
- 0 °
- Dip
- -90 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Laboratories Inc.
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-08T00:00:00.000Z
Reasoning: This intercept shows a strong silver grade over a good width for a tailings project, contributing positively to the overall grade profile and supporting the maiden resource estimate.
Positive factors
- Strong silver grade for tailings project
- True width disclosed
- Maiden drill program
- QA/QC disclosed
Evidence · table
“79.53”
Context: 2.25
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 2.25
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "Links: https://brixtonmetals.com/wp-content/uploads/2026/09/Figure-1_8Sept2026.png https://brixtonmetals.com/wp-content/"
LT-26-011Langis · silverGrade: 49.27Grade Unit: g/tIntercept: 2.25 mView all detailsHide details
Identity
- Hole ID
- LT-26-011
- Project
- Langis
- Commodity
- silver
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- BBB
Geometry
- Grade
- 49.27
- Grade Unit
- g/t
- Intercept
- 2.25 m
- True Width
- 2.25 m
- From
- 0 m
- To
- 2.25 m
- Hole Depth
- 2.44 m
- Intercept Depth
- 0 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- LT-26-011:0-2.25
Location
- Easting
- 606555
- Northing
- 5270601
- CRS
- NAD83 UTM Zone 17N
- EPSG
- 26917
- Elevation
- 201 m
- Azimuth
- 0 °
- Dip
- -90 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Laboratories Inc.
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-08T00:00:00.000Z
Reasoning: This intercept shows a moderate silver grade over a good width for a tailings project, contributing to the overall consistent grade profile and supporting the maiden resource estimate.
Positive factors
- Consistent silver grade for tailings project
- True width disclosed
- Maiden drill program
- QA/QC disclosed
Evidence · table
“49.27”
Context: 2.25
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 2.25
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "Links: https://brixtonmetals.com/wp-content/uploads/2026/09/Figure-1_8Sept2026.png https://brixtonmetals.com/wp-content/"
LT-26-012Langis · silverGrade: 51.69Grade Unit: g/tIntercept: 2.8 mView all detailsHide details
Identity
- Hole ID
- LT-26-012
- Project
- Langis
- Commodity
- silver
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- BBB
Geometry
- Grade
- 51.69
- Grade Unit
- g/t
- Intercept
- 2.8 m
- True Width
- 2.8 m
- From
- 0 m
- To
- 2.8 m
- Hole Depth
- 3.05 m
- Intercept Depth
- 0 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- LT-26-012:0-2.8
Location
- Easting
- 606567
- Northing
- 5270563
- CRS
- NAD83 UTM Zone 17N
- EPSG
- 26917
- Elevation
- 201 m
- Azimuth
- 0 °
- Dip
- -90 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Laboratories Inc.
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-08T00:00:00.000Z
Reasoning: This intercept shows a moderate silver grade over a good width for a tailings project, contributing to the overall consistent grade profile and supporting the maiden resource estimate.
Positive factors
- Consistent silver grade for tailings project
- True width disclosed
- Maiden drill program
- QA/QC disclosed
Evidence · table
“51.69”
Context: 2.80
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 2.8
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "Links: https://brixtonmetals.com/wp-content/uploads/2026/09/Figure-1_8Sept2026.png https://brixtonmetals.com/wp-content/"
LT-26-013Langis · silverGrade: 61.65Grade Unit: g/tIntercept: 1.65 mView all detailsHide details
Identity
- Hole ID
- LT-26-013
- Project
- Langis
- Commodity
- silver
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- BBB
Geometry
- Grade
- 61.65
- Grade Unit
- g/t
- Intercept
- 1.65 m
- True Width
- 1.65 m
- From
- 0 m
- To
- 1.65 m
- Hole Depth
- 3.05 m
- Intercept Depth
- 0 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- LT-26-013:0-1.65
Location
- Easting
- 606528
- Northing
- 5270565
- CRS
- NAD83 UTM Zone 17N
- EPSG
- 26917
- Elevation
- 199 m
- Azimuth
- 0 °
- Dip
- -90 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Laboratories Inc.
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-08T00:00:00.000Z
Reasoning: This intercept shows a strong silver grade over a good width for a tailings project, contributing positively to the overall grade profile and supporting the maiden resource estimate.
Positive factors
- Strong silver grade for tailings project
- True width disclosed
- Maiden drill program
- QA/QC disclosed
Evidence · table
“61.65”
Context: 1.65
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 1.65
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "Links: https://brixtonmetals.com/wp-content/uploads/2026/09/Figure-1_8Sept2026.png https://brixtonmetals.com/wp-content/"
LT-26-014Langis · silverGrade: 58.94Grade Unit: g/tIntercept: 2.4 mView all detailsHide details
Identity
- Hole ID
- LT-26-014
- Project
- Langis
- Commodity
- silver
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- BBB
Geometry
- Grade
- 58.94
- Grade Unit
- g/t
- Intercept
- 2.4 m
- True Width
- 2.4 m
- From
- 0 m
- To
- 2.4 m
- Hole Depth
- 3.05 m
- Intercept Depth
- 0 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- LT-26-014:0-2.4
Location
- Easting
- 606487
- Northing
- 5270567
- CRS
- NAD83 UTM Zone 17N
- EPSG
- 26917
- Elevation
- 200 m
- Azimuth
- 0 °
- Dip
- -90 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Laboratories Inc.
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-08T00:00:00.000Z
Reasoning: This intercept shows a strong silver grade over a good width for a tailings project, contributing positively to the overall grade profile and supporting the maiden resource estimate.
Positive factors
- Strong silver grade for tailings project
- True width disclosed
- Maiden drill program
- QA/QC disclosed
Evidence · table
“58.94”
Context: 2.40
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 2.4
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "Links: https://brixtonmetals.com/wp-content/uploads/2026/09/Figure-1_8Sept2026.png https://brixtonmetals.com/wp-content/"
LT-26-015Langis · silverGrade: 47.98Grade Unit: g/tIntercept: 1.9 mView all detailsHide details
Identity
- Hole ID
- LT-26-015
- Project
- Langis
- Commodity
- silver
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- BBB
Geometry
- Grade
- 47.98
- Grade Unit
- g/t
- Intercept
- 1.9 m
- True Width
- 1.9 m
- From
- 0 m
- To
- 1.9 m
- Hole Depth
- 3.05 m
- Intercept Depth
- 0 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- LT-26-015:0-1.9
Location
- Easting
- 606448
- Northing
- 5270573
- CRS
- NAD83 UTM Zone 17N
- EPSG
- 26917
- Elevation
- 199 m
- Azimuth
- 0 °
- Dip
- -90 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Laboratories Inc.
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-08T00:00:00.000Z
Reasoning: This intercept shows a moderate silver grade over a good width for a tailings project, contributing to the overall consistent grade profile and supporting the maiden resource estimate.
Positive factors
- Consistent silver grade for tailings project
- True width disclosed
- Maiden drill program
- QA/QC disclosed
Evidence · table
“47.98”
Context: 1.90
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 1.9
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "Links: https://brixtonmetals.com/wp-content/uploads/2026/09/Figure-1_8Sept2026.png https://brixtonmetals.com/wp-content/"
LT-26-016Langis · silverGrade: 50.31Grade Unit: g/tIntercept: 1.8 mView all detailsHide details
Identity
- Hole ID
- LT-26-016
- Project
- Langis
- Commodity
- silver
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- BBB
Geometry
- Grade
- 50.31
- Grade Unit
- g/t
- Intercept
- 1.8 m
- True Width
- 1.8 m
- From
- 0 m
- To
- 1.8 m
- Hole Depth
- 3.05 m
- Intercept Depth
- 0 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- LT-26-016:0-1.8
Location
- Easting
- 606407
- Northing
- 5270575
- CRS
- NAD83 UTM Zone 17N
- EPSG
- 26917
- Elevation
- 198 m
- Azimuth
- 0 °
- Dip
- -90 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Laboratories Inc.
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-08T00:00:00.000Z
Reasoning: This intercept shows a moderate silver grade over a good width for a tailings project, contributing to the overall consistent grade profile and supporting the maiden resource estimate.
Positive factors
- Consistent silver grade for tailings project
- True width disclosed
- Maiden drill program
- QA/QC disclosed
Evidence · table
“50.31”
Context: 1.80
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 1.8
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "Links: https://brixtonmetals.com/wp-content/uploads/2026/09/Figure-1_8Sept2026.png https://brixtonmetals.com/wp-content/"
LT-26-017Langis · silverGrade: 52.31Grade Unit: g/tIntercept: 1.2 mView all detailsHide details
Identity
- Hole ID
- LT-26-017
- Project
- Langis
- Commodity
- silver
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- BBB
Geometry
- Grade
- 52.31
- Grade Unit
- g/t
- Intercept
- 1.2 m
- True Width
- 1.2 m
- From
- 0 m
- To
- 1.2 m
- Hole Depth
- 3.05 m
- Intercept Depth
- 0 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- LT-26-017:0-1.2
Location
- Easting
- 606367
- Northing
- 5270580
- CRS
- NAD83 UTM Zone 17N
- EPSG
- 26917
- Elevation
- 197 m
- Azimuth
- 0 °
- Dip
- -90 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Laboratories Inc.
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-08T00:00:00.000Z
Reasoning: This intercept shows a moderate silver grade over a good width for a tailings project, contributing to the overall consistent grade profile and supporting the maiden resource estimate.
Positive factors
- Consistent silver grade for tailings project
- True width disclosed
- Maiden drill program
- QA/QC disclosed
Evidence · table
“52.31”
Context: 1.20
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 1.2
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "Links: https://brixtonmetals.com/wp-content/uploads/2026/09/Figure-1_8Sept2026.png https://brixtonmetals.com/wp-content/"
LT-26-018Langis · silverGrade: 53.76Grade Unit: g/tIntercept: 1.25 mView all detailsHide details
Identity
- Hole ID
- LT-26-018
- Project
- Langis
- Commodity
- silver
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- BBB
Geometry
- Grade
- 53.76
- Grade Unit
- g/t
- Intercept
- 1.25 m
- True Width
- 1.25 m
- From
- 0 m
- To
- 1.25 m
- Hole Depth
- 3.05 m
- Intercept Depth
- 0 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- LT-26-018:0-1.25
Location
- Easting
- 606366
- Northing
- 5270541
- CRS
- NAD83 UTM Zone 17N
- EPSG
- 26917
- Elevation
- 197 m
- Azimuth
- 0 °
- Dip
- -90 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Laboratories Inc.
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-08T00:00:00.000Z
Reasoning: This intercept shows a moderate silver grade over a good width for a tailings project, contributing to the overall consistent grade profile and supporting the maiden resource estimate.
Positive factors
- Consistent silver grade for tailings project
- True width disclosed
- Maiden drill program
- QA/QC disclosed
Evidence · table
“53.76”
Context: 1.25
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 1.25
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "Links: https://brixtonmetals.com/wp-content/uploads/2026/09/Figure-1_8Sept2026.png https://brixtonmetals.com/wp-content/"
LT-26-019Langis · silverGrade: 49.73Grade Unit: g/tIntercept: 1.5 mView all detailsHide details
Identity
- Hole ID
- LT-26-019
- Project
- Langis
- Commodity
- silver
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- BBB
Geometry
- Grade
- 49.73
- Grade Unit
- g/t
- Intercept
- 1.5 m
- True Width
- 1.5 m
- From
- 0 m
- To
- 1.5 m
- Hole Depth
- 3.05 m
- Intercept Depth
- 0 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- LT-26-019:0-1.5
Location
- Easting
- 606407
- Northing
- 5270538
- CRS
- NAD83 UTM Zone 17N
- EPSG
- 26917
- Elevation
- 198 m
- Azimuth
- 0 °
- Dip
- -90 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Laboratories Inc.
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-08T00:00:00.000Z
Reasoning: This intercept shows a moderate silver grade over a good width for a tailings project, contributing to the overall consistent grade profile and supporting the maiden resource estimate.
Positive factors
- Consistent silver grade for tailings project
- True width disclosed
- Maiden drill program
- QA/QC disclosed
Evidence · table
“49.73”
Context: 1.50
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 1.5
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "Links: https://brixtonmetals.com/wp-content/uploads/2026/09/Figure-1_8Sept2026.png https://brixtonmetals.com/wp-content/"
LT-26-020Langis · silverGrade: 50.99Grade Unit: g/tIntercept: 2.7 mView all detailsHide details
Identity
- Hole ID
- LT-26-020
- Project
- Langis
- Commodity
- silver
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- BBB
Geometry
- Grade
- 50.99
- Grade Unit
- g/t
- Intercept
- 2.7 m
- True Width
- 2.7 m
- From
- 0 m
- To
- 2.7 m
- Hole Depth
- 3.05 m
- Intercept Depth
- 0 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- LT-26-020:0-2.7
Location
- Easting
- 606449
- Northing
- 5270535
- CRS
- NAD83 UTM Zone 17N
- EPSG
- 26917
- Elevation
- 200 m
- Azimuth
- 0 °
- Dip
- -90 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Laboratories Inc.
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-08T00:00:00.000Z
Reasoning: This intercept shows a moderate silver grade over a good width for a tailings project, contributing to the overall consistent grade profile and supporting the maiden resource estimate.
Positive factors
- Consistent silver grade for tailings project
- True width disclosed
- Maiden drill program
- QA/QC disclosed
Evidence · table
“50.99”
Context: 2.70
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 2.7
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "Links: https://brixtonmetals.com/wp-content/uploads/2026/09/Figure-1_8Sept2026.png https://brixtonmetals.com/wp-content/"
LT-26-021Langis · silverGrade: 53.72Grade Unit: g/tIntercept: 2.65 mView all detailsHide details
Identity
- Hole ID
- LT-26-021
- Project
- Langis
- Commodity
- silver
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- BBB
Geometry
- Grade
- 53.72
- Grade Unit
- g/t
- Intercept
- 2.65 m
- True Width
- 2.65 m
- From
- 0 m
- To
- 2.65 m
- Hole Depth
- 3.05 m
- Intercept Depth
- 0 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- LT-26-021:0-2.65
Location
- Easting
- 606488
- Northing
- 5270533
- CRS
- NAD83 UTM Zone 17N
- EPSG
- 26917
- Elevation
- 200 m
- Azimuth
- 0 °
- Dip
- -90 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Laboratories Inc.
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-08T00:00:00.000Z
Reasoning: This intercept shows a moderate silver grade over a good width for a tailings project, contributing to the overall consistent grade profile and supporting the maiden resource estimate.
Positive factors
- Consistent silver grade for tailings project
- True width disclosed
- Maiden drill program
- QA/QC disclosed
Evidence · table
“53.72”
Context: 2.65
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 2.65
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "Links: https://brixtonmetals.com/wp-content/uploads/2026/09/Figure-1_8Sept2026.png https://brixtonmetals.com/wp-content/"
LT-26-022Langis · silverGrade: 55.79Grade Unit: g/tIntercept: 3.7 mView all detailsHide details
Identity
- Hole ID
- LT-26-022
- Project
- Langis
- Commodity
- silver
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- BBB
Geometry
- Grade
- 55.79
- Grade Unit
- g/t
- Intercept
- 3.7 m
- True Width
- 3.7 m
- From
- 0 m
- To
- 3.7 m
- Hole Depth
- 4.57 m
- Intercept Depth
- 0 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- LT-26-022:0-3.7
Location
- Easting
- 606527
- Northing
- 5270528
- CRS
- NAD83 UTM Zone 17N
- EPSG
- 26917
- Elevation
- 204 m
- Azimuth
- 0 °
- Dip
- -90 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Laboratories Inc.
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-08T00:00:00.000Z
Reasoning: This intercept shows a moderate silver grade over a good width for a tailings project, contributing to the overall consistent grade profile and supporting the maiden resource estimate.
Positive factors
- Consistent silver grade for tailings project
- True width disclosed
- Maiden drill program
- QA/QC disclosed
Evidence · table
“55.79”
Context: 3.70
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 3.7
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "Links: https://brixtonmetals.com/wp-content/uploads/2026/09/Figure-1_8Sept2026.png https://brixtonmetals.com/wp-content/"
LT-26-023Langis · silverGrade: 66.24Grade Unit: g/tIntercept: 2.3 mView all detailsHide details
Identity
- Hole ID
- LT-26-023
- Project
- Langis
- Commodity
- silver
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- BBB
Geometry
- Grade
- 66.24
- Grade Unit
- g/t
- Intercept
- 2.3 m
- True Width
- 2.3 m
- From
- 0 m
- To
- 2.3 m
- Hole Depth
- 4.57 m
- Intercept Depth
- 0 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- LT-26-023:0-2.3
Location
- Easting
- 606568
- Northing
- 5270527
- CRS
- NAD83 UTM Zone 17N
- EPSG
- 26917
- Elevation
- 204 m
- Azimuth
- 0 °
- Dip
- -90 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Laboratories Inc.
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-08T00:00:00.000Z
Reasoning: This intercept shows a strong silver grade over a good width for a tailings project, contributing positively to the overall grade profile and supporting the maiden resource estimate.
Positive factors
- Strong silver grade for tailings project
- True width disclosed
- Maiden drill program
- QA/QC disclosed
Evidence · table
“66.24”
Context: 2.30
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 2.3
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "Links: https://brixtonmetals.com/wp-content/uploads/2026/09/Figure-1_8Sept2026.png https://brixtonmetals.com/wp-content/"
LT-26-024Langis · silverGrade: 50.82Grade Unit: g/tIntercept: 2.45 mView all detailsHide details
Identity
- Hole ID
- LT-26-024
- Project
- Langis
- Commodity
- silver
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- BBB
Geometry
- Grade
- 50.82
- Grade Unit
- g/t
- Intercept
- 2.45 m
- True Width
- 2.45 m
- From
- 0 m
- To
- 2.45 m
- Hole Depth
- 3.05 m
- Intercept Depth
- 0 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- LT-26-024:0-2.45
Location
- Easting
- 606554
- Northing
- 5270500
- CRS
- NAD83 UTM Zone 17N
- EPSG
- 26917
- Elevation
- 204 m
- Azimuth
- 0 °
- Dip
- -90 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Laboratories Inc.
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-08T00:00:00.000Z
Reasoning: This intercept shows a moderate silver grade over a good width for a tailings project, contributing to the overall consistent grade profile and supporting the maiden resource estimate.
Positive factors
- Consistent silver grade for tailings project
- True width disclosed
- Maiden drill program
- QA/QC disclosed
Evidence · table
“50.82”
Context: 2.45
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 2.45
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "Links: https://brixtonmetals.com/wp-content/uploads/2026/09/Figure-1_8Sept2026.png https://brixtonmetals.com/wp-content/"
LT-26-025Langis · silverGrade: 50.1Grade Unit: g/tIntercept: 3.55 mView all detailsHide details
Identity
- Hole ID
- LT-26-025
- Project
- Langis
- Commodity
- silver
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- BBB
Geometry
- Grade
- 50.1
- Grade Unit
- g/t
- Intercept
- 3.55 m
- True Width
- 3.55 m
- From
- 0 m
- To
- 3.55 m
- Hole Depth
- 4.57 m
- Intercept Depth
- 0 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- LT-26-025:0-3.55
Location
- Easting
- 606521
- Northing
- 5270503
- CRS
- NAD83 UTM Zone 17N
- EPSG
- 26917
- Elevation
- 204 m
- Azimuth
- 0 °
- Dip
- -90 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Laboratories Inc.
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-08T00:00:00.000Z
Reasoning: This intercept shows a moderate silver grade over a good width for a tailings project, contributing to the overall consistent grade profile and supporting the maiden resource estimate.
Positive factors
- Consistent silver grade for tailings project
- True width disclosed
- Maiden drill program
- QA/QC disclosed
Evidence · table
“50.10”
Context: 3.55
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 3.55
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "Links: https://brixtonmetals.com/wp-content/uploads/2026/09/Figure-1_8Sept2026.png https://brixtonmetals.com/wp-content/"
LT-26-026Langis · silverGrade: 46.58Grade Unit: g/tIntercept: 2.58 mView all detailsHide details
Identity
- Hole ID
- LT-26-026
- Project
- Langis
- Commodity
- silver
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- BBB
Geometry
- Grade
- 46.58
- Grade Unit
- g/t
- Intercept
- 2.58 m
- True Width
- 2.58 m
- From
- 0 m
- To
- 2.58 m
- Hole Depth
- 3.05 m
- Intercept Depth
- 0 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- LT-26-026:0-2.58
Location
- Easting
- 606488
- Northing
- 5270494
- CRS
- NAD83 UTM Zone 17N
- EPSG
- 26917
- Elevation
- 203 m
- Azimuth
- 0 °
- Dip
- -90 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Laboratories Inc.
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-08T00:00:00.000Z
Reasoning: This intercept shows a moderate silver grade over a good width for a tailings project, contributing to the overall consistent grade profile and supporting the maiden resource estimate.
Positive factors
- Consistent silver grade for tailings project
- True width disclosed
- Maiden drill program
- QA/QC disclosed
Evidence · table
“46.58”
Context: 2.58
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 2.58
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "Links: https://brixtonmetals.com/wp-content/uploads/2026/09/Figure-1_8Sept2026.png https://brixtonmetals.com/wp-content/"
LT-26-027Langis · silverGrade: 55.39Grade Unit: g/tIntercept: 2.3 mView all detailsHide details
Identity
- Hole ID
- LT-26-027
- Project
- Langis
- Commodity
- silver
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- BBB
Geometry
- Grade
- 55.39
- Grade Unit
- g/t
- Intercept
- 2.3 m
- True Width
- 2.3 m
- From
- 0 m
- To
- 2.3 m
- Hole Depth
- 3.05 m
- Intercept Depth
- 0 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- LT-26-027:0-2.3
Location
- Easting
- 606451
- Northing
- 5270501
- CRS
- NAD83 UTM Zone 17N
- EPSG
- 26917
- Elevation
- 203 m
- Azimuth
- 0 °
- Dip
- -90 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Laboratories Inc.
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-08T00:00:00.000Z
Reasoning: This intercept shows a moderate silver grade over a good width for a tailings project, contributing to the overall consistent grade profile and supporting the maiden resource estimate.
Positive factors
- Consistent silver grade for tailings project
- True width disclosed
- Maiden drill program
- QA/QC disclosed
Evidence · table
“55.39”
Context: 2.30
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 2.3
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "Links: https://brixtonmetals.com/wp-content/uploads/2026/09/Figure-1_8Sept2026.png https://brixtonmetals.com/wp-content/"
LT-26-028Langis · silverGrade: 45.54Grade Unit: g/tIntercept: 1.3 mView all detailsHide details
Identity
- Hole ID
- LT-26-028
- Project
- Langis
- Commodity
- silver
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- BBB
Geometry
- Grade
- 45.54
- Grade Unit
- g/t
- Intercept
- 1.3 m
- True Width
- 1.3 m
- From
- 0 m
- To
- 1.3 m
- Hole Depth
- 3.05 m
- Intercept Depth
- 0 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- LT-26-028:0-1.3
Location
- Easting
- 606409
- Northing
- 5270503
- CRS
- NAD83 UTM Zone 17N
- EPSG
- 26917
- Elevation
- 204 m
- Azimuth
- 0 °
- Dip
- -90 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Laboratories Inc.
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-08T00:00:00.000Z
Reasoning: This intercept shows a weak to moderate silver grade over a short width, consistent with the overall grade profile of the tailings, supporting the maiden resource estimate.
Positive factors
- Consistent silver grade for tailings project
- True width disclosed
- Maiden drill program
- QA/QC disclosed
Evidence · table
“45.54”
Context: 1.30
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 1.3
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "Links: https://brixtonmetals.com/wp-content/uploads/2026/09/Figure-1_8Sept2026.png https://brixtonmetals.com/wp-content/"
LT-26-029Langis · silverGrade: 46.8Grade Unit: g/tIntercept: 0.9 mView all detailsHide details
Identity
- Hole ID
- LT-26-029
- Project
- Langis
- Commodity
- silver
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- BBB
Geometry
- Grade
- 46.8
- Grade Unit
- g/t
- Intercept
- 0.9 m
- True Width
- 0.9 m
- From
- 0 m
- To
- 0.9 m
- Hole Depth
- 3.05 m
- Intercept Depth
- 0 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- LT-26-029:0-0.9
Location
- Easting
- 606370
- Northing
- 5270494
- CRS
- NAD83 UTM Zone 17N
- EPSG
- 26917
- Elevation
- 202 m
- Azimuth
- 0 °
- Dip
- -90 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Laboratories Inc.
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-08T00:00:00.000Z
Reasoning: This intercept shows a weak to moderate silver grade over a short width, consistent with the overall grade profile of the tailings, supporting the maiden resource estimate.
Positive factors
- Consistent silver grade for tailings project
- True width disclosed
- Maiden drill program
- QA/QC disclosed
Evidence · table
“46.80”
Context: 0.90
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 0.9
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "Links: https://brixtonmetals.com/wp-content/uploads/2026/09/Figure-1_8Sept2026.png https://brixtonmetals.com/wp-content/"
LT-26-030Langis · silverGrade: 42.27Grade Unit: g/tIntercept: 1 mView all detailsHide details
Identity
- Hole ID
- LT-26-030
- Project
- Langis
- Commodity
- silver
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- BBB
Geometry
- Grade
- 42.27
- Grade Unit
- g/t
- Intercept
- 1 m
- True Width
- 1 m
- From
- 0 m
- To
- 1 m
- Hole Depth
- 3.05 m
- Intercept Depth
- 0 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- LT-26-030:0-1
Location
- Easting
- 606373
- Northing
- 5270457
- CRS
- NAD83 UTM Zone 17N
- EPSG
- 26917
- Elevation
- 203 m
- Azimuth
- 0 °
- Dip
- -90 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Laboratories Inc.
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-08T00:00:00.000Z
Reasoning: This intercept shows a weak to moderate silver grade over a short width, consistent with the overall grade profile of the tailings, supporting the maiden resource estimate.
Positive factors
- Consistent silver grade for tailings project
- True width disclosed
- Maiden drill program
- QA/QC disclosed
Evidence · table
“42.27”
Context: 1.00
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 1
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "Links: https://brixtonmetals.com/wp-content/uploads/2026/09/Figure-1_8Sept2026.png https://brixtonmetals.com/wp-content/"
LT-26-031Langis · silverGrade: 50.23Grade Unit: g/tIntercept: 1.5 mView all detailsHide details
Identity
- Hole ID
- LT-26-031
- Project
- Langis
- Commodity
- silver
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- BBB
Geometry
- Grade
- 50.23
- Grade Unit
- g/t
- Intercept
- 1.5 m
- True Width
- 1.5 m
- From
- 0 m
- To
- 1.5 m
- Hole Depth
- 3.05 m
- Intercept Depth
- 0 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- LT-26-031:0-1.5
Location
- Easting
- 606415
- Northing
- 5270464
- CRS
- NAD83 UTM Zone 17N
- EPSG
- 26917
- Elevation
- 205 m
- Azimuth
- 0 °
- Dip
- -90 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Laboratories Inc.
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-08T00:00:00.000Z
Reasoning: This intercept shows a moderate silver grade over a good width for a tailings project, contributing to the overall consistent grade profile and supporting the maiden resource estimate.
Positive factors
- Consistent silver grade for tailings project
- True width disclosed
- Maiden drill program
- QA/QC disclosed
Evidence · table
“50.23”
Context: 1.50
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 1.5
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "Links: https://brixtonmetals.com/wp-content/uploads/2026/09/Figure-1_8Sept2026.png https://brixtonmetals.com/wp-content/"
LT-26-032Langis · silverGrade: 55.98Grade Unit: g/tIntercept: 2 mView all detailsHide details
Identity
- Hole ID
- LT-26-032
- Project
- Langis
- Commodity
- silver
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- BBB
Geometry
- Grade
- 55.98
- Grade Unit
- g/t
- Intercept
- 2 m
- True Width
- 2 m
- From
- 0 m
- To
- 2 m
- Hole Depth
- 3.05 m
- Intercept Depth
- 0 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- LT-26-032:0-2
Location
- Easting
- 606457
- Northing
- 5270468
- CRS
- NAD83 UTM Zone 17N
- EPSG
- 26917
- Elevation
- 206 m
- Azimuth
- 0 °
- Dip
- -90 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Laboratories Inc.
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-08T00:00:00.000Z
Reasoning: This intercept shows a moderate silver grade over a good width for a tailings project, contributing to the overall consistent grade profile and supporting the maiden resource estimate.
Positive factors
- Consistent silver grade for tailings project
- True width disclosed
- Maiden drill program
- QA/QC disclosed
Evidence · table
“55.98”
Context: 2.00
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 2
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "Links: https://brixtonmetals.com/wp-content/uploads/2026/09/Figure-1_8Sept2026.png https://brixtonmetals.com/wp-content/"
LT-26-033Langis · silverGrade: 51.36Grade Unit: g/tIntercept: 2.35 mView all detailsHide details
Identity
- Hole ID
- LT-26-033
- Project
- Langis
- Commodity
- silver
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- BBB
Geometry
- Grade
- 51.36
- Grade Unit
- g/t
- Intercept
- 2.35 m
- True Width
- 2.35 m
- From
- 0 m
- To
- 2.35 m
- Hole Depth
- 3.05 m
- Intercept Depth
- 0 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- LT-26-033:0-2.35
Location
- Easting
- 606497
- Northing
- 5270461
- CRS
- NAD83 UTM Zone 17N
- EPSG
- 26917
- Elevation
- 206 m
- Azimuth
- 0 °
- Dip
- -90 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Laboratories Inc.
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-08T00:00:00.000Z
Reasoning: This intercept shows a moderate silver grade over a good width for a tailings project, contributing to the overall consistent grade profile and supporting the maiden resource estimate.
Positive factors
- Consistent silver grade for tailings project
- True width disclosed
- Maiden drill program
- QA/QC disclosed
Evidence · table
“51.36”
Context: 2.35
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 2.35
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "Links: https://brixtonmetals.com/wp-content/uploads/2026/09/Figure-1_8Sept2026.png https://brixtonmetals.com/wp-content/"
LT-26-034Langis · silverGrade: 51.1Grade Unit: g/tIntercept: 1.65 mView all detailsHide details
Identity
- Hole ID
- LT-26-034
- Project
- Langis
- Commodity
- silver
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- BBB
Geometry
- Grade
- 51.1
- Grade Unit
- g/t
- Intercept
- 1.65 m
- True Width
- 1.65 m
- From
- 0 m
- To
- 1.65 m
- Hole Depth
- 2.13 m
- Intercept Depth
- 0 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- LT-26-034:0-1.65
Location
- Easting
- 606531
- Northing
- 5270447
- CRS
- NAD83 UTM Zone 17N
- EPSG
- 26917
- Elevation
- 205 m
- Azimuth
- 0 °
- Dip
- -90 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Laboratories Inc.
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-08T00:00:00.000Z
Reasoning: This intercept shows a moderate silver grade over a good width for a tailings project, contributing to the overall consistent grade profile and supporting the maiden resource estimate.
Positive factors
- Consistent silver grade for tailings project
- True width disclosed
- Maiden drill program
- QA/QC disclosed
Evidence · table
“51.10”
Context: 1.65
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 1.65
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "Links: https://brixtonmetals.com/wp-content/uploads/2026/09/Figure-1_8Sept2026.png https://brixtonmetals.com/wp-content/"
LT-26-035Langis · silverGrade: 44.96Grade Unit: g/tIntercept: 1.25 mView all detailsHide details
Identity
- Hole ID
- LT-26-035
- Project
- Langis
- Commodity
- silver
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- BBB
Geometry
- Grade
- 44.96
- Grade Unit
- g/t
- Intercept
- 1.25 m
- True Width
- 1.25 m
- From
- 0 m
- To
- 1.25 m
- Hole Depth
- 3.05 m
- Intercept Depth
- 0 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- LT-26-035:0-1.25
Location
- Easting
- 606503
- Northing
- 5270421
- CRS
- NAD83 UTM Zone 17N
- EPSG
- 26917
- Elevation
- 204 m
- Azimuth
- 0 °
- Dip
- -90 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Laboratories Inc.
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-08T00:00:00.000Z
Reasoning: This intercept shows a weak to moderate silver grade over a short width, consistent with the overall grade profile of the tailings, supporting the maiden resource estimate.
Positive factors
- Consistent silver grade for tailings project
- True width disclosed
- Maiden drill program
- QA/QC disclosed
Evidence · table
“44.96”
Context: 1.25
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 1.25
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "Links: https://brixtonmetals.com/wp-content/uploads/2026/09/Figure-1_8Sept2026.png https://brixtonmetals.com/wp-content/"
LT-26-036Langis · silverGrade: 52.75Grade Unit: g/tIntercept: 1 mView all detailsHide details
Identity
- Hole ID
- LT-26-036
- Project
- Langis
- Commodity
- silver
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- BBB
Geometry
- Grade
- 52.75
- Grade Unit
- g/t
- Intercept
- 1 m
- True Width
- 1 m
- From
- 0 m
- To
- 1 m
- Hole Depth
- 3.05 m
- Intercept Depth
- 0 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- LT-26-036:0-1
Location
- Easting
- 606462
- Northing
- 5270417
- CRS
- NAD83 UTM Zone 17N
- EPSG
- 26917
- Elevation
- 204 m
- Azimuth
- 0 °
- Dip
- -90 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Laboratories Inc.
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-08T00:00:00.000Z
Reasoning: This intercept shows a moderate silver grade over a short width, consistent with the overall grade profile of the tailings, supporting the maiden resource estimate.
Positive factors
- Consistent silver grade for tailings project
- True width disclosed
- Maiden drill program
- QA/QC disclosed
Evidence · table
“52.75”
Context: 1.00
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 1
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "Links: https://brixtonmetals.com/wp-content/uploads/2026/09/Figure-1_8Sept2026.png https://brixtonmetals.com/wp-content/"
LT-26-037Langis · silverGrade: 65.64Grade Unit: g/tIntercept: 0.9 mView all detailsHide details
Identity
- Hole ID
- LT-26-037
- Project
- Langis
- Commodity
- silver
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- BBB
Geometry
- Grade
- 65.64
- Grade Unit
- g/t
- Intercept
- 0.9 m
- True Width
- 0.9 m
- From
- 0 m
- To
- 0.9 m
- Hole Depth
- 3.05 m
- Intercept Depth
- 0 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- LT-26-037:0-0.9
Location
- Easting
- 606420
- Northing
- 5270415
- CRS
- NAD83 UTM Zone 17N
- EPSG
- 26917
- Elevation
- 204 m
- Azimuth
- 0 °
- Dip
- -90 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Laboratories Inc.
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-08T00:00:00.000Z
Reasoning: This intercept shows a strong silver grade over a short width for a tailings project, contributing positively to the overall grade profile and supporting the maiden resource estimate.
Positive factors
- Strong silver grade for tailings project
- True width disclosed
- Maiden drill program
- QA/QC disclosed
Evidence · table
“65.64”
Context: 0.90
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 0.9
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "Links: https://brixtonmetals.com/wp-content/uploads/2026/09/Figure-1_8Sept2026.png https://brixtonmetals.com/wp-content/"
LT-26-038Langis · silverGrade: 59.06Grade Unit: g/tIntercept: 0.93 mView all detailsHide details
Identity
- Hole ID
- LT-26-038
- Project
- Langis
- Commodity
- silver
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- BBB
Geometry
- Grade
- 59.06
- Grade Unit
- g/t
- Intercept
- 0.93 m
- True Width
- 0.93 m
- From
- 0 m
- To
- 0.93 m
- Hole Depth
- 3.05 m
- Intercept Depth
- 0 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- LT-26-038:0-0.93
Location
- Easting
- 606382
- Northing
- 5270417
- CRS
- NAD83 UTM Zone 17N
- EPSG
- 26917
- Elevation
- 202 m
- Azimuth
- 0 °
- Dip
- -90 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Laboratories Inc.
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-08T00:00:00.000Z
Reasoning: This intercept shows a strong silver grade over a short width for a tailings project, contributing positively to the overall grade profile and supporting the maiden resource estimate.
Positive factors
- Strong silver grade for tailings project
- True width disclosed
- Maiden drill program
- QA/QC disclosed
Evidence · table
“59.06”
Context: 0.93
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 0.93
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "Links: https://brixtonmetals.com/wp-content/uploads/2026/09/Figure-1_8Sept2026.png https://brixtonmetals.com/wp-content/"
LT-26-039Langis · silverGrade: 59.7Grade Unit: g/tIntercept: 0.6 mView all detailsHide details
Identity
- Hole ID
- LT-26-039
- Project
- Langis
- Commodity
- silver
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- BBB
Geometry
- Grade
- 59.7
- Grade Unit
- g/t
- Intercept
- 0.6 m
- True Width
- 0.6 m
- From
- 0 m
- To
- 0.6 m
- Hole Depth
- 3.05 m
- Intercept Depth
- 0 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- LT-26-039:0-0.6
Location
- Easting
- 606397
- Northing
- 5270378
- CRS
- NAD83 UTM Zone 17N
- EPSG
- 26917
- Elevation
- 202 m
- Azimuth
- 0 °
- Dip
- -90 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Laboratories Inc.
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-08T00:00:00.000Z
Reasoning: This intercept shows a strong silver grade over a short width for a tailings project, contributing positively to the overall grade profile and supporting the maiden resource estimate.
Positive factors
- Strong silver grade for tailings project
- True width disclosed
- Maiden drill program
- QA/QC disclosed
Evidence · table
“59.70”
Context: 0.60
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 0.6
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "Links: https://brixtonmetals.com/wp-content/uploads/2026/09/Figure-1_8Sept2026.png https://brixtonmetals.com/wp-content/"
LT-26-040Langis · silverGrade: 53.05Grade Unit: g/tIntercept: 0.8 mView all detailsHide details
Identity
- Hole ID
- LT-26-040
- Project
- Langis
- Commodity
- silver
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- BBB
Geometry
- Grade
- 53.05
- Grade Unit
- g/t
- Intercept
- 0.8 m
- True Width
- 0.8 m
- From
- 0 m
- To
- 0.8 m
- Hole Depth
- 3.05 m
- Intercept Depth
- 0 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- LT-26-040:0-0.8
Location
- Easting
- 606441
- Northing
- 5270382
- CRS
- NAD83 UTM Zone 17N
- EPSG
- 26917
- Elevation
- 201 m
- Azimuth
- 0 °
- Dip
- -90 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Laboratories Inc.
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-08T00:00:00.000Z
Reasoning: This intercept shows a moderate silver grade over a short width, consistent with the overall grade profile of the tailings, supporting the maiden resource estimate.
Positive factors
- Consistent silver grade for tailings project
- True width disclosed
- Maiden drill program
- QA/QC disclosed
Evidence · table
“53.05”
Context: 0.80
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 0.8
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "Links: https://brixtonmetals.com/wp-content/uploads/2026/09/Figure-1_8Sept2026.png https://brixtonmetals.com/wp-content/"
LT-26-041Langis · silverGrade: 69.95Grade Unit: g/tIntercept: 1 mView all detailsHide details
Identity
- Hole ID
- LT-26-041
- Project
- Langis
- Commodity
- silver
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- BBB
Geometry
- Grade
- 69.95
- Grade Unit
- g/t
- Intercept
- 1 m
- True Width
- 1 m
- From
- 0 m
- To
- 1 m
- Hole Depth
- 3.05 m
- Intercept Depth
- 0 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- LT-26-041:0-1
Location
- Easting
- 606564
- Northing
- 5270721
- CRS
- NAD83 UTM Zone 17N
- EPSG
- 26917
- Elevation
- 197 m
- Azimuth
- 0 °
- Dip
- -90 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Laboratories Inc.
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-08T00:00:00.000Z
Reasoning: This intercept shows a strong silver grade over a short width for a tailings project, contributing positively to the overall grade profile and supporting the maiden resource estimate.
Positive factors
- Strong silver grade for tailings project
- True width disclosed
- Maiden drill program
- QA/QC disclosed
Evidence · table
“69.95”
Context: 1.00
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 1
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "Links: https://brixtonmetals.com/wp-content/uploads/2026/09/Figure-1_8Sept2026.png https://brixtonmetals.com/wp-content/"
LT-26-042Langis · silverGrade: 52.76Grade Unit: g/tIntercept: 1.16 mView all detailsHide details
Identity
- Hole ID
- LT-26-042
- Project
- Langis
- Commodity
- silver
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- BBB
Geometry
- Grade
- 52.76
- Grade Unit
- g/t
- Intercept
- 1.16 m
- True Width
- 1.16 m
- From
- 0 m
- To
- 1.16 m
- Hole Depth
- 3.05 m
- Intercept Depth
- 0 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- LT-26-042:0-1.16
Location
- Easting
- 606527
- Northing
- 5270720
- CRS
- NAD83 UTM Zone 17N
- EPSG
- 26917
- Elevation
- 195 m
- Azimuth
- 0 °
- Dip
- -90 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Laboratories Inc.
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-08T00:00:00.000Z
Reasoning: This intercept shows a moderate silver grade over a good width for a tailings project, contributing to the overall consistent grade profile and supporting the maiden resource estimate.
Positive factors
- Consistent silver grade for tailings project
- True width disclosed
- Maiden drill program
- QA/QC disclosed
Evidence · table
“52.76”
Context: 1.16
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 1.16
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "Links: https://brixtonmetals.com/wp-content/uploads/2026/09/Figure-1_8Sept2026.png https://brixtonmetals.com/wp-content/"
LT-26-043Langis · silverGrade: 66.56Grade Unit: g/tIntercept: 1.02 mView all detailsHide details
Identity
- Hole ID
- LT-26-043
- Project
- Langis
- Commodity
- silver
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- BBB
Geometry
- Grade
- 66.56
- Grade Unit
- g/t
- Intercept
- 1.02 m
- True Width
- 1.02 m
- From
- 0 m
- To
- 1.02 m
- Hole Depth
- 3.05 m
- Intercept Depth
- 0 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- LT-26-043:0-1.02
Location
- Easting
- 606488
- Northing
- 5270720
- CRS
- NAD83 UTM Zone 17N
- EPSG
- 26917
- Elevation
- 194 m
- Azimuth
- 0 °
- Dip
- -90 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Laboratories Inc.
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-08T00:00:00.000Z
Reasoning: This intercept shows a strong silver grade over a short width for a tailings project, contributing positively to the overall grade profile and supporting the maiden resource estimate.
Positive factors
- Strong silver grade for tailings project
- True width disclosed
- Maiden drill program
- QA/QC disclosed
Evidence · table
“66.56”
Context: 1.02
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 1.02
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "Links: https://brixtonmetals.com/wp-content/uploads/2026/09/Figure-1_8Sept2026.png https://brixtonmetals.com/wp-content/"
LT-26-044Langis · silverGrade: 71.24Grade Unit: g/tIntercept: 0.86 mView all detailsHide details
Identity
- Hole ID
- LT-26-044
- Project
- Langis
- Commodity
- silver
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- BBB
Geometry
- Grade
- 71.24
- Grade Unit
- g/t
- Intercept
- 0.86 m
- True Width
- 0.86 m
- From
- 0 m
- To
- 0.86 m
- Hole Depth
- 3.05 m
- Intercept Depth
- 0 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- LT-26-044:0-0.86
Location
- Easting
- 606449
- Northing
- 5270716
- CRS
- NAD83 UTM Zone 17N
- EPSG
- 26917
- Elevation
- 192 m
- Azimuth
- 0 °
- Dip
- -90 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Laboratories Inc.
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-08T00:00:00.000Z
Reasoning: This intercept shows a strong silver grade over a short width for a tailings project, contributing positively to the overall grade profile and supporting the maiden resource estimate.
Positive factors
- Strong silver grade for tailings project
- True width disclosed
- Maiden drill program
- QA/QC disclosed
Evidence · table
“71.24”
Context: 0.86
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 0.86
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "Links: https://brixtonmetals.com/wp-content/uploads/2026/09/Figure-1_8Sept2026.png https://brixtonmetals.com/wp-content/"
LT-26-045Langis · silverGrade: 77.4Grade Unit: g/tIntercept: 0.16 mView all detailsHide details
Identity
- Hole ID
- LT-26-045
- Project
- Langis
- Commodity
- silver
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- BBB
Geometry
- Grade
- 77.4
- Grade Unit
- g/t
- Intercept
- 0.16 m
- True Width
- 0.16 m
- From
- 0 m
- To
- 0.16 m
- Hole Depth
- 3.05 m
- Intercept Depth
- 0 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- LT-26-045:0-0.16
Location
- Easting
- 606406
- Northing
- 5270717
- CRS
- NAD83 UTM Zone 17N
- EPSG
- 26917
- Elevation
- 192 m
- Azimuth
- 0 °
- Dip
- -90 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Laboratories Inc.
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-08T00:00:00.000Z
Reasoning: This intercept shows a strong silver grade over a very short width for a tailings project, contributing positively to the overall grade profile and supporting the maiden resource estimate.
Positive factors
- Strong silver grade for tailings project
- True width disclosed
- Maiden drill program
- QA/QC disclosed
Evidence · table
“77.40”
Context: 0.16
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 0.16
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "Links: https://brixtonmetals.com/wp-content/uploads/2026/09/Figure-1_8Sept2026.png https://brixtonmetals.com/wp-content/"
LT-26-046Langis · silverGrade: 85.3Grade Unit: g/tIntercept: 0.53 mView all detailsHide details
Identity
- Hole ID
- LT-26-046
- Project
- Langis
- Commodity
- silver
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- BBB
Geometry
- Grade
- 85.3
- Grade Unit
- g/t
- Intercept
- 0.53 m
- True Width
- 0.53 m
- From
- 0 m
- To
- 0.53 m
- Hole Depth
- 3.05 m
- Intercept Depth
- 0 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- LT-26-046:0-0.53
Location
- Easting
- 606403
- Northing
- 5270757
- CRS
- NAD83 UTM Zone 17N
- EPSG
- 26917
- Elevation
- 193 m
- Azimuth
- 0 °
- Dip
- -90 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Laboratories Inc.
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-08T00:00:00.000Z
Reasoning: This intercept shows a strong silver grade over a short width for a tailings project, contributing positively to the overall grade profile and supporting the maiden resource estimate.
Positive factors
- Strong silver grade for tailings project
- True width disclosed
- Maiden drill program
- QA/QC disclosed
Evidence · table
“85.30”
Context: 0.53
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 0.53
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "Links: https://brixtonmetals.com/wp-content/uploads/2026/09/Figure-1_8Sept2026.png https://brixtonmetals.com/wp-content/"
LT-26-047Langis · silverGrade: 70.35Grade Unit: g/tIntercept: 0.92 mView all detailsHide details
Identity
- Hole ID
- LT-26-047
- Project
- Langis
- Commodity
- silver
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- BBB
Geometry
- Grade
- 70.35
- Grade Unit
- g/t
- Intercept
- 0.92 m
- True Width
- 0.92 m
- From
- 0 m
- To
- 0.92 m
- Hole Depth
- 3.05 m
- Intercept Depth
- 0 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- LT-26-047:0-0.92
Location
- Easting
- 606444
- Northing
- 5270757
- CRS
- NAD83 UTM Zone 17N
- EPSG
- 26917
- Elevation
- 194 m
- Azimuth
- 0 °
- Dip
- -90 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Laboratories Inc.
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-08T00:00:00.000Z
Reasoning: This intercept shows a strong silver grade over a short width for a tailings project, contributing positively to the overall grade profile and supporting the maiden resource estimate.
Positive factors
- Strong silver grade for tailings project
- True width disclosed
- Maiden drill program
- QA/QC disclosed
Evidence · table
“70.35”
Context: 0.92
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 0.92
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "Links: https://brixtonmetals.com/wp-content/uploads/2026/09/Figure-1_8Sept2026.png https://brixtonmetals.com/wp-content/"
LT-26-048Langis · silverGrade: 63.41Grade Unit: g/tIntercept: 1.2 mView all detailsHide details
Identity
- Hole ID
- LT-26-048
- Project
- Langis
- Commodity
- silver
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- BBB
Geometry
- Grade
- 63.41
- Grade Unit
- g/t
- Intercept
- 1.2 m
- True Width
- 1.2 m
- From
- 0 m
- To
- 1.2 m
- Hole Depth
- 3.05 m
- Intercept Depth
- 0 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- LT-26-048:0-1.2
Location
- Easting
- 606485
- Northing
- 5270759
- CRS
- NAD83 UTM Zone 17N
- EPSG
- 26917
- Elevation
- 194 m
- Azimuth
- 0 °
- Dip
- -90 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Laboratories Inc.
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-08T00:00:00.000Z
Reasoning: This intercept shows a strong silver grade over a good width for a tailings project, contributing positively to the overall grade profile and supporting the maiden resource estimate.
Positive factors
- Strong silver grade for tailings project
- True width disclosed
- Maiden drill program
- QA/QC disclosed
Evidence · table
“63.41”
Context: 1.20
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 1.2
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "Links: https://brixtonmetals.com/wp-content/uploads/2026/09/Figure-1_8Sept2026.png https://brixtonmetals.com/wp-content/"
LT-26-049Langis · silverGrade: 44.75Grade Unit: g/tIntercept: 1.4 mView all detailsHide details
Identity
- Hole ID
- LT-26-049
- Project
- Langis
- Commodity
- silver
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- BBB
Geometry
- Grade
- 44.75
- Grade Unit
- g/t
- Intercept
- 1.4 m
- True Width
- 1.4 m
- From
- 0 m
- To
- 1.4 m
- Hole Depth
- 3.05 m
- Intercept Depth
- 0 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- LT-26-049:0-1.4
Location
- Easting
- 606526
- Northing
- 5270760
- CRS
- NAD83 UTM Zone 17N
- EPSG
- 26917
- Elevation
- 196 m
- Azimuth
- 0 °
- Dip
- -90 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Laboratories Inc.
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-08T00:00:00.000Z
Reasoning: This intercept shows a weak to moderate silver grade over a short width, consistent with the overall grade profile of the tailings, supporting the maiden resource estimate.
Positive factors
- Consistent silver grade for tailings project
- True width disclosed
- Maiden drill program
- QA/QC disclosed
Evidence · table
“44.75”
Context: 1.40
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 1.4
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "Links: https://brixtonmetals.com/wp-content/uploads/2026/09/Figure-1_8Sept2026.png https://brixtonmetals.com/wp-content/"
LT-26-050Langis · silverGrade: 56.04Grade Unit: g/tIntercept: 1.75 mView all detailsHide details
Identity
- Hole ID
- LT-26-050
- Project
- Langis
- Commodity
- silver
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- BBB
Geometry
- Grade
- 56.04
- Grade Unit
- g/t
- Intercept
- 1.75 m
- True Width
- 1.75 m
- From
- 0 m
- To
- 1.75 m
- Hole Depth
- 3.05 m
- Intercept Depth
- 0 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- LT-26-050:0-1.75
Location
- Easting
- 606564
- Northing
- 5270760
- CRS
- NAD83 UTM Zone 17N
- EPSG
- 26917
- Elevation
- 196 m
- Azimuth
- 0 °
- Dip
- -90 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Laboratories Inc.
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-08T00:00:00.000Z
Reasoning: This intercept shows a moderate silver grade over a good width for a tailings project, contributing to the overall consistent grade profile and supporting the maiden resource estimate.
Positive factors
- Consistent silver grade for tailings project
- True width disclosed
- Maiden drill program
- QA/QC disclosed
Evidence · table
“56.04”
Context: 1.75
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 1.75
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "Links: https://brixtonmetals.com/wp-content/uploads/2026/09/Figure-1_8Sept2026.png https://brixtonmetals.com/wp-content/"
LT-26-051Langis · silverGrade: 311.66Grade Unit: g/tIntercept: 1.53 mView all detailsHide details
Identity
- Hole ID
- LT-26-051
- Project
- Langis
- Commodity
- silver
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- BBB
Geometry
- Grade
- 311.66
- Grade Unit
- g/t
- Intercept
- 1.53 m
- True Width
- 1.53 m
- From
- 0 m
- To
- 1.53 m
- Hole Depth
- 2.13 m
- Intercept Depth
- 0 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- LT-26-051:0-1.53
Location
- Easting
- 606603
- Northing
- 5270759
- CRS
- NAD83 UTM Zone 17N
- EPSG
- 26917
- Elevation
- 198 m
- Azimuth
- 0 °
- Dip
- -90 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Laboratories Inc.
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-08T00:00:00.000Z
Reasoning: This intercept shows a strong silver grade over a good width for a tailings project, significantly contributing to the overall grade profile and supporting the maiden resource estimate.
Positive factors
- Strong silver grade for tailings project
- True width disclosed
- Maiden drill program
- QA/QC disclosed
Evidence · table
“311.66”
Context: 1.53
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 1.53
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "Links: https://brixtonmetals.com/wp-content/uploads/2026/09/Figure-1_8Sept2026.png https://brixtonmetals.com/wp-content/"
LT-26-051Langis · silverGrade: 810Grade Unit: g/tIntercept: 0.5 mView all detailsHide details
Identity
- Hole ID
- LT-26-051
- Project
- Langis
- Commodity
- silver
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- BBB
Geometry
- Grade
- 810
- Grade Unit
- g/t
- Intercept
- 0.5 m
- True Width
- 0.5 m
- From
- 0 m
- To
- 0.5 m
- Hole Depth
- 2.13 m
- Intercept Depth
- 0 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- LT-26-051:0-0.5
Location
- Easting
- 606603
- Northing
- 5270759
- CRS
- NAD83 UTM Zone 17N
- EPSG
- 26917
- Elevation
- 198 m
- Azimuth
- 0 °
- Dip
- -90 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Laboratories Inc.
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-08T00:00:00.000Z
Reasoning: This bonanza-grade silver intercept is a significant highlight of the maiden tailings drill program, demonstrating very high-grade potential within the tailings material.
Positive factors
- Exceptional bonanza silver grade for tailings project
- True width disclosed
- Maiden drill program
- QA/QC disclosed
Evidence · table
“810.00”
Context: 0.50
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 0.5
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "Links: https://brixtonmetals.com/wp-content/uploads/2026/09/Figure-1_8Sept2026.png https://brixtonmetals.com/wp-content/"
LT-26-052Langis · silverGrade: 62.57Grade Unit: g/tIntercept: 0.91 mView all detailsHide details
Identity
- Hole ID
- LT-26-052
- Project
- Langis
- Commodity
- silver
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- BBB
Geometry
- Grade
- 62.57
- Grade Unit
- g/t
- Intercept
- 0.91 m
- True Width
- 0.91 m
- From
- 0 m
- To
- 0.91 m
- Hole Depth
- 0.91 m
- Intercept Depth
- 0 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- LT-26-052:0-0.91
Location
- Easting
- 606631
- Northing
- 5270797
- CRS
- NAD83 UTM Zone 17N
- EPSG
- 26917
- Elevation
- 200 m
- Azimuth
- 0 °
- Dip
- -90 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Laboratories Inc.
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-08T00:00:00.000Z
Reasoning: This intercept shows a strong silver grade over a short width for a tailings project, contributing positively to the overall grade profile and supporting the maiden resource estimate.
Positive factors
- Strong silver grade for tailings project
- True width disclosed
- Maiden drill program
- QA/QC disclosed
Evidence · table
“62.57”
Context: 0.91
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 0.91
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "Links: https://brixtonmetals.com/wp-content/uploads/2026/09/Figure-1_8Sept2026.png https://brixtonmetals.com/wp-content/"
LT-26-053Langis · silverGrade: 62.31Grade Unit: g/tIntercept: 2.2 mView all detailsHide details
Identity
- Hole ID
- LT-26-053
- Project
- Langis
- Commodity
- silver
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- BBB
Geometry
- Grade
- 62.31
- Grade Unit
- g/t
- Intercept
- 2.2 m
- True Width
- 2.2 m
- From
- 0 m
- To
- 2.2 m
- Hole Depth
- 3.05 m
- Intercept Depth
- 0 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- LT-26-053:0-2.2
Location
- Easting
- 606595
- Northing
- 5270802
- CRS
- NAD83 UTM Zone 17N
- EPSG
- 26917
- Elevation
- 200 m
- Azimuth
- 0 °
- Dip
- -90 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Laboratories Inc.
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-08T00:00:00.000Z
Reasoning: This intercept shows a strong silver grade over a good width for a tailings project, contributing positively to the overall grade profile and supporting the maiden resource estimate.
Positive factors
- Strong silver grade for tailings project
- True width disclosed
- Maiden drill program
- QA/QC disclosed
Evidence · table
“62.31”
Context: 2.20
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 2.2
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "Links: https://brixtonmetals.com/wp-content/uploads/2026/09/Figure-1_8Sept2026.png https://brixtonmetals.com/wp-content/"
LT-26-054Langis · silverGrade: 45.73Grade Unit: g/tIntercept: 1.54 mView all detailsHide details
Identity
- Hole ID
- LT-26-054
- Project
- Langis
- Commodity
- silver
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- BBB
Geometry
- Grade
- 45.73
- Grade Unit
- g/t
- Intercept
- 1.54 m
- True Width
- 1.54 m
- From
- 0 m
- To
- 1.54 m
- Hole Depth
- 3.05 m
- Intercept Depth
- 0 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- LT-26-054:0-1.54
Location
- Easting
- 606555
- Northing
- 5270803
- CRS
- NAD83 UTM Zone 17N
- EPSG
- 26917
- Elevation
- 201 m
- Azimuth
- 0 °
- Dip
- -90 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Laboratories Inc.
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-08T00:00:00.000Z
Reasoning: This intercept shows a weak to moderate silver grade over a short width, consistent with the overall grade profile of the tailings, supporting the maiden resource estimate.
Positive factors
- Consistent silver grade for tailings project
- True width disclosed
- Maiden drill program
- QA/QC disclosed
Evidence · table
“45.73”
Context: 1.54
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 1.54
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "Links: https://brixtonmetals.com/wp-content/uploads/2026/09/Figure-1_8Sept2026.png https://brixtonmetals.com/wp-content/"
LT-26-055Langis · silverGrade: 51.97Grade Unit: g/tIntercept: 1.2 mView all detailsHide details
Identity
- Hole ID
- LT-26-055
- Project
- Langis
- Commodity
- silver
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- BBB
Geometry
- Grade
- 51.97
- Grade Unit
- g/t
- Intercept
- 1.2 m
- True Width
- 1.2 m
- From
- 0 m
- To
- 1.2 m
- Hole Depth
- 3.05 m
- Intercept Depth
- 0 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- LT-26-055:0-1.2
Location
- Easting
- 606515
- Northing
- 5270804
- CRS
- NAD83 UTM Zone 17N
- EPSG
- 26917
- Elevation
- 202 m
- Azimuth
- 0 °
- Dip
- -90 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Laboratories Inc.
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-08T00:00:00.000Z
Reasoning: This intercept shows a moderate silver grade over a good width for a tailings project, contributing to the overall consistent grade profile and supporting the maiden resource estimate.
Positive factors
- Consistent silver grade for tailings project
- True width disclosed
- Maiden drill program
- QA/QC disclosed
Evidence · table
“51.97”
Context: 1.20
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 1.2
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "Links: https://brixtonmetals.com/wp-content/uploads/2026/09/Figure-1_8Sept2026.png https://brixtonmetals.com/wp-content/"
LT-26-056Langis · silverGrade: 62.36Grade Unit: g/tIntercept: 0.8 mView all detailsHide details
Identity
- Hole ID
- LT-26-056
- Project
- Langis
- Commodity
- silver
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- BBB
Geometry
- Grade
- 62.36
- Grade Unit
- g/t
- Intercept
- 0.8 m
- True Width
- 0.8 m
- From
- 0 m
- To
- 0.8 m
- Hole Depth
- 3.05 m
- Intercept Depth
- 0 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- LT-26-056:0-0.8
Location
- Easting
- 606476
- Northing
- 5270804
- CRS
- NAD83 UTM Zone 17N
- EPSG
- 26917
- Elevation
- 201 m
- Azimuth
- 0 °
- Dip
- -90 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Laboratories Inc.
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-08T00:00:00.000Z
Reasoning: This intercept shows a strong silver grade over a short width for a tailings project, contributing positively to the overall grade profile and supporting the maiden resource estimate.
Positive factors
- Strong silver grade for tailings project
- True width disclosed
- Maiden drill program
- QA/QC disclosed
Evidence · table
“62.36”
Context: 0.80
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 0.8
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "Links: https://brixtonmetals.com/wp-content/uploads/2026/09/Figure-1_8Sept2026.png https://brixtonmetals.com/wp-content/"
LT-26-057Langis · silverGrade: 70.32Grade Unit: g/tIntercept: 0.65 mView all detailsHide details
Identity
- Hole ID
- LT-26-057
- Project
- Langis
- Commodity
- silver
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- BBB
Geometry
- Grade
- 70.32
- Grade Unit
- g/t
- Intercept
- 0.65 m
- True Width
- 0.65 m
- From
- 0 m
- To
- 0.65 m
- Hole Depth
- 3.05 m
- Intercept Depth
- 0 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- LT-26-057:0-0.65
Location
- Easting
- 606436
- Northing
- 5270806
- CRS
- NAD83 UTM Zone 17N
- EPSG
- 26917
- Elevation
- 200 m
- Azimuth
- 0 °
- Dip
- -90 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Laboratories Inc.
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-08T00:00:00.000Z
Reasoning: This intercept shows a strong silver grade over a short width for a tailings project, contributing positively to the overall grade profile and supporting the maiden resource estimate.
Positive factors
- Strong silver grade for tailings project
- True width disclosed
- Maiden drill program
- QA/QC disclosed
Evidence · table
“70.32”
Context: 0.65
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 0.65
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "Links: https://brixtonmetals.com/wp-content/uploads/2026/09/Figure-1_8Sept2026.png https://brixtonmetals.com/wp-content/"
LT-26-058Langis · silverGrade: 68.05Grade Unit: g/tIntercept: 1 mView all detailsHide details
Identity
- Hole ID
- LT-26-058
- Project
- Langis
- Commodity
- silver
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- BBB
Geometry
- Grade
- 68.05
- Grade Unit
- g/t
- Intercept
- 1 m
- True Width
- 1 m
- From
- 0 m
- To
- 1 m
- Hole Depth
- 3.05 m
- Intercept Depth
- 0 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- LT-26-058:0-1
Location
- Easting
- 606439
- Northing
- 5270846
- CRS
- NAD83 UTM Zone 17N
- EPSG
- 26917
- Elevation
- 200 m
- Azimuth
- 0 °
- Dip
- -90 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Laboratories Inc.
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-08T00:00:00.000Z
Reasoning: This intercept shows a strong silver grade over a short width for a tailings project, contributing positively to the overall grade profile and supporting the maiden resource estimate.
Positive factors
- Strong silver grade for tailings project
- True width disclosed
- Maiden drill program
- QA/QC disclosed
Evidence · table
“68.05”
Context: 1.00
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 1
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "Links: https://brixtonmetals.com/wp-content/uploads/2026/09/Figure-1_8Sept2026.png https://brixtonmetals.com/wp-content/"
LT-26-059Langis · silverGrade: 74.8Grade Unit: g/tIntercept: 1 mView all detailsHide details
Identity
- Hole ID
- LT-26-059
- Project
- Langis
- Commodity
- silver
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- BBB
Geometry
- Grade
- 74.8
- Grade Unit
- g/t
- Intercept
- 1 m
- True Width
- 1 m
- From
- 0 m
- To
- 1 m
- Hole Depth
- 3.05 m
- Intercept Depth
- 0 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- LT-26-059:0-1
Location
- Easting
- 606479
- Northing
- 5270846
- CRS
- NAD83 UTM Zone 17N
- EPSG
- 26917
- Elevation
- 200 m
- Azimuth
- 0 °
- Dip
- -90 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Laboratories Inc.
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-08T00:00:00.000Z
Reasoning: This intercept shows a strong silver grade over a short width for a tailings project, contributing positively to the overall grade profile and supporting the maiden resource estimate.
Positive factors
- Strong silver grade for tailings project
- True width disclosed
- Maiden drill program
- QA/QC disclosed
Evidence · table
“74.80”
Context: 1.00
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 1
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "Links: https://brixtonmetals.com/wp-content/uploads/2026/09/Figure-1_8Sept2026.png https://brixtonmetals.com/wp-content/"
LT-26-060Langis · silverGrade: 67.42Grade Unit: g/tIntercept: 2 mView all detailsHide details
Identity
- Hole ID
- LT-26-060
- Project
- Langis
- Commodity
- silver
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- BBB
Geometry
- Grade
- 67.42
- Grade Unit
- g/t
- Intercept
- 2 m
- True Width
- 2 m
- From
- 0 m
- To
- 2 m
- Hole Depth
- 3.05 m
- Intercept Depth
- 0 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- LT-26-060:0-2
Location
- Easting
- 606520
- Northing
- 5270844
- CRS
- NAD83 UTM Zone 17N
- EPSG
- 26917
- Elevation
- 201 m
- Azimuth
- 0 °
- Dip
- -90 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Laboratories Inc.
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-08T00:00:00.000Z
Reasoning: This intercept shows a strong silver grade over a good width for a tailings project, contributing positively to the overall grade profile and supporting the maiden resource estimate.
Positive factors
- Strong silver grade for tailings project
- True width disclosed
- Maiden drill program
- QA/QC disclosed
Evidence · table
“67.42”
Context: 2.00
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 2
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "Links: https://brixtonmetals.com/wp-content/uploads/2026/09/Figure-1_8Sept2026.png https://brixtonmetals.com/wp-content/"
LT-26-061Langis · silverGrade: 41.79Grade Unit: g/tIntercept: 1.35 mView all detailsHide details
Identity
- Hole ID
- LT-26-061
- Project
- Langis
- Commodity
- silver
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- BBB
Geometry
- Grade
- 41.79
- Grade Unit
- g/t
- Intercept
- 1.35 m
- True Width
- 1.35 m
- From
- 0 m
- To
- 1.35 m
- Hole Depth
- 3.05 m
- Intercept Depth
- 0 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- LT-26-061:0-1.35
Location
- Easting
- 606560
- Northing
- 5270842
- CRS
- NAD83 UTM Zone 17N
- EPSG
- 26917
- Elevation
- 200 m
- Azimuth
- 0 °
- Dip
- -90 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Laboratories Inc.
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-08T00:00:00.000Z
Reasoning: This intercept shows a weak to moderate silver grade over a short width, consistent with the overall grade profile of the tailings, supporting the maiden resource estimate.
Positive factors
- Consistent silver grade for tailings project
- True width disclosed
- Maiden drill program
- QA/QC disclosed
Evidence · table
“41.79”
Context: 1.35
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 1.35
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "Links: https://brixtonmetals.com/wp-content/uploads/2026/09/Figure-1_8Sept2026.png https://brixtonmetals.com/wp-content/"
LT-26-062Langis · silverGrade: 68.24Grade Unit: g/tIntercept: 1.45 mView all detailsHide details
Identity
- Hole ID
- LT-26-062
- Project
- Langis
- Commodity
- silver
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- BBB
Geometry
- Grade
- 68.24
- Grade Unit
- g/t
- Intercept
- 1.45 m
- True Width
- 1.45 m
- From
- 0 m
- To
- 1.45 m
- Hole Depth
- 3.05 m
- Intercept Depth
- 0 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- LT-26-062:0-1.45
Location
- Easting
- 606600
- Northing
- 5270840
- CRS
- NAD83 UTM Zone 17N
- EPSG
- 26917
- Elevation
- 201 m
- Azimuth
- 0 °
- Dip
- -90 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Laboratories Inc.
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-08T00:00:00.000Z
Reasoning: This intercept shows a strong silver grade over a good width for a tailings project, contributing positively to the overall grade profile and supporting the maiden resource estimate.
Positive factors
- Strong silver grade for tailings project
- True width disclosed
- Maiden drill program
- QA/QC disclosed
Evidence · table
“68.24”
Context: 1.45
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 1.45
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "Links: https://brixtonmetals.com/wp-content/uploads/2026/09/Figure-1_8Sept2026.png https://brixtonmetals.com/wp-content/"
LT-26-063Langis · silverGrade: 43.35Grade Unit: g/tIntercept: 1.3 mView all detailsHide details
Identity
- Hole ID
- LT-26-063
- Project
- Langis
- Commodity
- silver
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- BBB
Geometry
- Grade
- 43.35
- Grade Unit
- g/t
- Intercept
- 1.3 m
- True Width
- 1.3 m
- From
- 0 m
- To
- 1.3 m
- Hole Depth
- 3.05 m
- Intercept Depth
- 0 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- LT-26-063:0-1.3
Location
- Easting
- 606641
- Northing
- 5270837
- CRS
- NAD83 UTM Zone 17N
- EPSG
- 26917
- Elevation
- 201 m
- Azimuth
- 0 °
- Dip
- -90 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Laboratories Inc.
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-08T00:00:00.000Z
Reasoning: This intercept shows a weak to moderate silver grade over a short width, consistent with the overall grade profile of the tailings, supporting the maiden resource estimate.
Positive factors
- Consistent silver grade for tailings project
- True width disclosed
- Maiden drill program
- QA/QC disclosed
Evidence · table
“43.35”
Context: 1.30
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 1.3
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "Links: https://brixtonmetals.com/wp-content/uploads/2026/09/Figure-1_8Sept2026.png https://brixtonmetals.com/wp-content/"
LT-26-064Langis · silverGrade: 81.23Grade Unit: g/tIntercept: 1.5 mView all detailsHide details
Identity
- Hole ID
- LT-26-064
- Project
- Langis
- Commodity
- silver
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- BBB
Geometry
- Grade
- 81.23
- Grade Unit
- g/t
- Intercept
- 1.5 m
- True Width
- 1.5 m
- From
- 0 m
- To
- 1.5 m
- Hole Depth
- 3.66 m
- Intercept Depth
- 0 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- LT-26-064:0-1.5
Location
- Easting
- 606640
- Northing
- 5270877
- CRS
- NAD83 UTM Zone 17N
- EPSG
- 26917
- Elevation
- 202 m
- Azimuth
- 0 °
- Dip
- -90 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Laboratories Inc.
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-08T00:00:00.000Z
Reasoning: This intercept shows a strong silver grade over a good width for a tailings project, contributing positively to the overall grade profile and supporting the maiden resource estimate.
Positive factors
- Strong silver grade for tailings project
- True width disclosed
- Maiden drill program
- QA/QC disclosed
Evidence · table
“81.23”
Context: 1.50
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 1.5
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "Links: https://brixtonmetals.com/wp-content/uploads/2026/09/Figure-1_8Sept2026.png https://brixtonmetals.com/wp-content/"
LT-26-064Langis · silverGrade: 128Grade Unit: g/tIntercept: 0.5 mView all detailsHide details
Identity
- Hole ID
- LT-26-064
- Project
- Langis
- Commodity
- silver
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- BBB
Geometry
- Grade
- 128
- Grade Unit
- g/t
- Intercept
- 0.5 m
- True Width
- 0.5 m
- From
- 1 m
- To
- 1.5 m
- Hole Depth
- 3.66 m
- Intercept Depth
- 1 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- LT-26-064:1-1.5
Location
- Easting
- 606640
- Northing
- 5270877
- CRS
- NAD83 UTM Zone 17N
- EPSG
- 26917
- Elevation
- 202 m
- Azimuth
- 0 °
- Dip
- -90 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Laboratories Inc.
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-08T00:00:00.000Z
Reasoning: This high-grade silver sub-intercept further enhances the overall positive results from the maiden tailings drill program, indicating zones of higher concentration.
Positive factors
- High silver grade for tailings project
- True width disclosed
- Maiden drill program
- QA/QC disclosed
Evidence · table
“128.00”
Context: 0.50
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 0.5
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "Links: https://brixtonmetals.com/wp-content/uploads/2026/09/Figure-1_8Sept2026.png https://brixtonmetals.com/wp-content/"
LT-26-065Langis · silverGrade: 48.74Grade Unit: g/tIntercept: 1.2 mView all detailsHide details
Identity
- Hole ID
- LT-26-065
- Project
- Langis
- Commodity
- silver
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- BBB
Geometry
- Grade
- 48.74
- Grade Unit
- g/t
- Intercept
- 1.2 m
- True Width
- 1.2 m
- From
- 0 m
- To
- 1.2 m
- Hole Depth
- 3.05 m
- Intercept Depth
- 0 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- LT-26-065:0-1.2
Location
- Easting
- 606601
- Northing
- 5270881
- CRS
- NAD83 UTM Zone 17N
- EPSG
- 26917
- Elevation
- 200 m
- Azimuth
- 0 °
- Dip
- -90 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Laboratories Inc.
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-08T00:00:00.000Z
Reasoning: This intercept shows a moderate silver grade over a good width for a tailings project, contributing to the overall consistent grade profile and supporting the maiden resource estimate.
Positive factors
- Consistent silver grade for tailings project
- True width disclosed
- Maiden drill program
- QA/QC disclosed
Evidence · table
“48.74”
Context: 1.20
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 1.2
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "Links: https://brixtonmetals.com/wp-content/uploads/2026/09/Figure-1_8Sept2026.png https://brixtonmetals.com/wp-content/"
LT-26-066Langis · silverGrade: 48.8Grade Unit: g/tIntercept: 1.5 mView all detailsHide details
Identity
- Hole ID
- LT-26-066
- Project
- Langis
- Commodity
- silver
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- BBB
Geometry
- Grade
- 48.8
- Grade Unit
- g/t
- Intercept
- 1.5 m
- True Width
- 1.5 m
- From
- 0 m
- To
- 1.5 m
- Hole Depth
- 3.05 m
- Intercept Depth
- 0 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- LT-26-066:0-1.5
Location
- Easting
- 606561
- Northing
- 5270882
- CRS
- NAD83 UTM Zone 17N
- EPSG
- 26917
- Elevation
- 200 m
- Azimuth
- 0 °
- Dip
- -90 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Laboratories Inc.
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-08T00:00:00.000Z
Reasoning: This intercept shows a moderate silver grade over a good width for a tailings project, contributing to the overall consistent grade profile and supporting the maiden resource estimate.
Positive factors
- Consistent silver grade for tailings project
- True width disclosed
- Maiden drill program
- QA/QC disclosed
Evidence · table
“48.80”
Context: 1.50
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 1.5
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "Links: https://brixtonmetals.com/wp-content/uploads/2026/09/Figure-1_8Sept2026.png https://brixtonmetals.com/wp-content/"
LT-26-067Langis · silverGrade: 59.87Grade Unit: g/tIntercept: 1.83 mView all detailsHide details
Identity
- Hole ID
- LT-26-067
- Project
- Langis
- Commodity
- silver
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- BBB
Geometry
- Grade
- 59.87
- Grade Unit
- g/t
- Intercept
- 1.83 m
- True Width
- 1.83 m
- From
- 0 m
- To
- 1.83 m
- Hole Depth
- 3.05 m
- Intercept Depth
- 0 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- LT-26-067:0-1.83
Location
- Easting
- 606521
- Northing
- 5270884
- CRS
- NAD83 UTM Zone 17N
- EPSG
- 26917
- Elevation
- 201 m
- Azimuth
- 0 °
- Dip
- -90 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Laboratories Inc.
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-08T00:00:00.000Z
Reasoning: This intercept shows a strong silver grade over a good width for a tailings project, contributing positively to the overall grade profile and supporting the maiden resource estimate.
Positive factors
- Strong silver grade for tailings project
- True width disclosed
- Maiden drill program
- QA/QC disclosed
Evidence · table
“59.87”
Context: 1.83
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 1.83
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "Links: https://brixtonmetals.com/wp-content/uploads/2026/09/Figure-1_8Sept2026.png https://brixtonmetals.com/wp-content/"
LT-26-068Langis · silverGrade: 70.04Grade Unit: g/tIntercept: 0.86 mView all detailsHide details
Identity
- Hole ID
- LT-26-068
- Project
- Langis
- Commodity
- silver
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- BBB
Geometry
- Grade
- 70.04
- Grade Unit
- g/t
- Intercept
- 0.86 m
- True Width
- 0.86 m
- From
- 0 m
- To
- 0.86 m
- Hole Depth
- 3.05 m
- Intercept Depth
- 0 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- LT-26-068:0-0.86
Location
- Easting
- 606480
- Northing
- 5270886
- CRS
- NAD83 UTM Zone 17N
- EPSG
- 26917
- Elevation
- 200 m
- Azimuth
- 0 °
- Dip
- -90 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Laboratories Inc.
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-08T00:00:00.000Z
Reasoning: This intercept shows a strong silver grade over a short width for a tailings project, contributing positively to the overall grade profile and supporting the maiden resource estimate.
Positive factors
- Strong silver grade for tailings project
- True width disclosed
- Maiden drill program
- QA/QC disclosed
Evidence · table
“70.04”
Context: 0.86
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 0.86
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "Links: https://brixtonmetals.com/wp-content/uploads/2026/09/Figure-1_8Sept2026.png https://brixtonmetals.com/wp-content/"
LT-26-069Langis · silverGrade: 69.4Grade Unit: g/tIntercept: 0.58 mView all detailsHide details
Identity
- Hole ID
- LT-26-069
- Project
- Langis
- Commodity
- silver
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- BBB
Geometry
- Grade
- 69.4
- Grade Unit
- g/t
- Intercept
- 0.58 m
- True Width
- 0.58 m
- From
- 0 m
- To
- 0.58 m
- Hole Depth
- 3.05 m
- Intercept Depth
- 0 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- LT-26-069:0-0.58
Location
- Easting
- 606441
- Northing
- 5270886
- CRS
- NAD83 UTM Zone 17N
- EPSG
- 26917
- Elevation
- 200 m
- Azimuth
- 0 °
- Dip
- -90 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Laboratories Inc.
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-08T00:00:00.000Z
Reasoning: This intercept shows a strong silver grade over a short width for a tailings project, contributing positively to the overall grade profile and supporting the maiden resource estimate.
Positive factors
- Strong silver grade for tailings project
- True width disclosed
- Maiden drill program
- QA/QC disclosed
Evidence · table
“69.40”
Context: 0.58
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 0.58
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "Links: https://brixtonmetals.com/wp-content/uploads/2026/09/Figure-1_8Sept2026.png https://brixtonmetals.com/wp-content/"
LT-26-070Langis · silverGrade: 56.4Grade Unit: g/tIntercept: 0.6 mView all detailsHide details
Identity
- Hole ID
- LT-26-070
- Project
- Langis
- Commodity
- silver
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- BBB
Geometry
- Grade
- 56.4
- Grade Unit
- g/t
- Intercept
- 0.6 m
- True Width
- 0.6 m
- From
- 0 m
- To
- 0.6 m
- Hole Depth
- 3.05 m
- Intercept Depth
- 0 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- LT-26-070:0-0.6
Location
- Easting
- 606439
- Northing
- 5270926
- CRS
- NAD83 UTM Zone 17N
- EPSG
- 26917
- Elevation
- 200 m
- Azimuth
- 0 °
- Dip
- -90 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Laboratories Inc.
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-08T00:00:00.000Z
Reasoning: This intercept shows a moderate silver grade over a short width, consistent with the overall grade profile of the tailings, supporting the maiden resource estimate.
Positive factors
- Consistent silver grade for tailings project
- True width disclosed
- Maiden drill program
- QA/QC disclosed
Evidence · table
“56.40”
Context: 0.60
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 0.6
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "Links: https://brixtonmetals.com/wp-content/uploads/2026/09/Figure-1_8Sept2026.png https://brixtonmetals.com/wp-content/"
LT-26-071Langis · silverGrade: 59.56Grade Unit: g/tIntercept: 0.88 mView all detailsHide details
Identity
- Hole ID
- LT-26-071
- Project
- Langis
- Commodity
- silver
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- BBB
Geometry
- Grade
- 59.56
- Grade Unit
- g/t
- Intercept
- 0.88 m
- True Width
- 0.88 m
- From
- 0 m
- To
- 0.88 m
- Hole Depth
- 3.05 m
- Intercept Depth
- 0 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- LT-26-071:0-0.88
Location
- Easting
- 606480
- Northing
- 5270924
- CRS
- NAD83 UTM Zone 17N
- EPSG
- 26917
- Elevation
- 201 m
- Azimuth
- 0 °
- Dip
- -90 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Laboratories Inc.
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-08T00:00:00.000Z
Reasoning: This intercept shows a strong silver grade over a short width for a tailings project, contributing positively to the overall grade profile and supporting the maiden resource estimate.
Positive factors
- Strong silver grade for tailings project
- True width disclosed
- Maiden drill program
- QA/QC disclosed
Evidence · table
“59.56”
Context: 0.88
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 0.88
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "Links: https://brixtonmetals.com/wp-content/uploads/2026/09/Figure-1_8Sept2026.png https://brixtonmetals.com/wp-content/"
LT-26-072Langis · silverGrade: 64.63Grade Unit: g/tIntercept: 1.53 mView all detailsHide details
Identity
- Hole ID
- LT-26-072
- Project
- Langis
- Commodity
- silver
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- BBB
Geometry
- Grade
- 64.63
- Grade Unit
- g/t
- Intercept
- 1.53 m
- True Width
- 1.53 m
- From
- 0 m
- To
- 1.53 m
- Hole Depth
- 3.05 m
- Intercept Depth
- 0 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- LT-26-072:0-1.53
Location
- Easting
- 606521
- Northing
- 5270924
- CRS
- NAD83 UTM Zone 17N
- EPSG
- 26917
- Elevation
- 201 m
- Azimuth
- 0 °
- Dip
- -90 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Laboratories Inc.
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-08T00:00:00.000Z
Reasoning: This intercept shows a strong silver grade over a good width for a tailings project, contributing positively to the overall grade profile and supporting the maiden resource estimate.
Positive factors
- Strong silver grade for tailings project
- True width disclosed
- Maiden drill program
- QA/QC disclosed
Evidence · table
“64.63”
Context: 1.53
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 1.53
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "Links: https://brixtonmetals.com/wp-content/uploads/2026/09/Figure-1_8Sept2026.png https://brixtonmetals.com/wp-content/"
LT-26-073Langis · silverGrade: 56.75Grade Unit: g/tIntercept: 1.28 mView all detailsHide details
Identity
- Hole ID
- LT-26-073
- Project
- Langis
- Commodity
- silver
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- BBB
Geometry
- Grade
- 56.75
- Grade Unit
- g/t
- Intercept
- 1.28 m
- True Width
- 1.28 m
- From
- 0 m
- To
- 1.28 m
- Hole Depth
- 3.05 m
- Intercept Depth
- 0 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- LT-26-073:0-1.28
Location
- Easting
- 606562
- Northing
- 5270923
- CRS
- NAD83 UTM Zone 17N
- EPSG
- 26917
- Elevation
- 201 m
- Azimuth
- 0 °
- Dip
- -90 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Laboratories Inc.
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-08T00:00:00.000Z
Reasoning: This intercept shows a moderate silver grade over a good width for a tailings project, contributing to the overall consistent grade profile and supporting the maiden resource estimate.
Positive factors
- Consistent silver grade for tailings project
- True width disclosed
- Maiden drill program
- QA/QC disclosed
Evidence · table
“56.75”
Context: 1.28
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 1.28
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "Links: https://brixtonmetals.com/wp-content/uploads/2026/09/Figure-1_8Sept2026.png https://brixtonmetals.com/wp-content/"
LT-26-074Langis · silverGrade: 47.3Grade Unit: g/tIntercept: 1 mView all detailsHide details
Identity
- Hole ID
- LT-26-074
- Project
- Langis
- Commodity
- silver
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- BBB
Geometry
- Grade
- 47.3
- Grade Unit
- g/t
- Intercept
- 1 m
- True Width
- 1 m
- From
- 0 m
- To
- 1 m
- Hole Depth
- 3.05 m
- Intercept Depth
- 0 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- LT-26-074:0-1
Location
- Easting
- 606603
- Northing
- 5270921
- CRS
- NAD83 UTM Zone 17N
- EPSG
- 26917
- Elevation
- 200 m
- Azimuth
- 0 °
- Dip
- -90 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Laboratories Inc.
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-08T00:00:00.000Z
Reasoning: This intercept shows a weak to moderate silver grade over a short width, consistent with the overall grade profile of the tailings, supporting the maiden resource estimate.
Positive factors
- Consistent silver grade for tailings project
- True width disclosed
- Maiden drill program
- QA/QC disclosed
Evidence · table
“47.30”
Context: 1.00
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 1
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "Links: https://brixtonmetals.com/wp-content/uploads/2026/09/Figure-1_8Sept2026.png https://brixtonmetals.com/wp-content/"
LT-26-075Langis · silverGrade: 83.28Grade Unit: g/tIntercept: 1.25 mView all detailsHide details
Identity
- Hole ID
- LT-26-075
- Project
- Langis
- Commodity
- silver
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- BBB
Geometry
- Grade
- 83.28
- Grade Unit
- g/t
- Intercept
- 1.25 m
- True Width
- 1.25 m
- From
- 0 m
- To
- 1.25 m
- Hole Depth
- 3.05 m
- Intercept Depth
- 0 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- LT-26-075:0-1.25
Location
- Easting
- 606644
- Northing
- 5270921
- CRS
- NAD83 UTM Zone 17N
- EPSG
- 26917
- Elevation
- 200 m
- Azimuth
- 0 °
- Dip
- -90 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Laboratories Inc.
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-08T00:00:00.000Z
Reasoning: This intercept shows a strong silver grade over a good width for a tailings project, contributing positively to the overall grade profile and supporting the maiden resource estimate.
Positive factors
- Strong silver grade for tailings project
- True width disclosed
- Maiden drill program
- QA/QC disclosed
Evidence · table
“83.28”
Context: 1.25
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 1.25
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "Links: https://brixtonmetals.com/wp-content/uploads/2026/09/Figure-1_8Sept2026.png https://brixtonmetals.com/wp-content/"
LT-26-075Langis · silverGrade: 150Grade Unit: g/tIntercept: 0.25 mView all detailsHide details
Identity
- Hole ID
- LT-26-075
- Project
- Langis
- Commodity
- silver
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- BBB
Geometry
- Grade
- 150
- Grade Unit
- g/t
- Intercept
- 0.25 m
- True Width
- 0.25 m
- From
- 1 m
- To
- 1.25 m
- Hole Depth
- 3.05 m
- Intercept Depth
- 1 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- LT-26-075:1-1.25
Location
- Easting
- 606644
- Northing
- 5270921
- CRS
- NAD83 UTM Zone 17N
- EPSG
- 26917
- Elevation
- 200 m
- Azimuth
- 0 °
- Dip
- -90 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Laboratories Inc.
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-08T00:00:00.000Z
Reasoning: This high-grade silver sub-intercept further enhances the overall positive results from the maiden tailings drill program, indicating zones of higher concentration.
Positive factors
- High silver grade for tailings project
- True width disclosed
- Maiden drill program
- QA/QC disclosed
Evidence · table
“150.00”
Context: 0.25
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 0.25
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "Links: https://brixtonmetals.com/wp-content/uploads/2026/09/Figure-1_8Sept2026.png https://brixtonmetals.com/wp-content/"
LT-26-076Langis · silverGrade: 104.09Grade Unit: g/tIntercept: 1.75 mView all detailsHide details
Identity
- Hole ID
- LT-26-076
- Project
- Langis
- Commodity
- silver
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- BBB
Geometry
- Grade
- 104.09
- Grade Unit
- g/t
- Intercept
- 1.75 m
- True Width
- 1.75 m
- From
- 0 m
- To
- 1.75 m
- Hole Depth
- 3.05 m
- Intercept Depth
- 0 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- LT-26-076:0-1.75
Location
- Easting
- 606639
- Northing
- 5270960
- CRS
- NAD83 UTM Zone 17N
- EPSG
- 26917
- Elevation
- 194 m
- Azimuth
- 0 °
- Dip
- -90 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Laboratories Inc.
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-08T00:00:00.000Z
Reasoning: This intercept shows a high silver grade over a good width for a tailings project, significantly contributing to the overall grade profile and supporting the maiden resource estimate.
Positive factors
- High silver grade for tailings project
- True width disclosed
- Maiden drill program
- QA/QC disclosed
Evidence · table
“104.09”
Context: 1.75
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 1.75
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "Links: https://brixtonmetals.com/wp-content/uploads/2026/09/Figure-1_8Sept2026.png https://brixtonmetals.com/wp-content/"
LT-26-076Langis · silverGrade: 172Grade Unit: g/tIntercept: 0.75 mView all detailsHide details
Identity
- Hole ID
- LT-26-076
- Project
- Langis
- Commodity
- silver
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- BBB
Geometry
- Grade
- 172
- Grade Unit
- g/t
- Intercept
- 0.75 m
- True Width
- 0.75 m
- From
- 1 m
- To
- 1.75 m
- Hole Depth
- 3.05 m
- Intercept Depth
- 1 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- LT-26-076:1-1.75
Location
- Easting
- 606639
- Northing
- 5270960
- CRS
- NAD83 UTM Zone 17N
- EPSG
- 26917
- Elevation
- 194 m
- Azimuth
- 0 °
- Dip
- -90 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Laboratories Inc.
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-08T00:00:00.000Z
Reasoning: This high-grade silver sub-intercept further enhances the overall positive results from the maiden tailings drill program, indicating zones of higher concentration.
Positive factors
- High silver grade for tailings project
- True width disclosed
- Maiden drill program
- QA/QC disclosed
Evidence · table
“172.00”
Context: 0.75
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 0.75
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "Links: https://brixtonmetals.com/wp-content/uploads/2026/09/Figure-1_8Sept2026.png https://brixtonmetals.com/wp-content/"
LT-26-077Langis · silverGrade: 66.66Grade Unit: g/tIntercept: 1.88 mView all detailsHide details
Identity
- Hole ID
- LT-26-077
- Project
- Langis
- Commodity
- silver
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- BBB
Geometry
- Grade
- 66.66
- Grade Unit
- g/t
- Intercept
- 1.88 m
- True Width
- 1.88 m
- From
- 0 m
- To
- 1.88 m
- Hole Depth
- 3.05 m
- Intercept Depth
- 0 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- LT-26-077:0-1.88
Location
- Easting
- 606600
- Northing
- 5270959
- CRS
- NAD83 UTM Zone 17N
- EPSG
- 26917
- Elevation
- 193 m
- Azimuth
- 0 °
- Dip
- -90 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Laboratories Inc.
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-08T00:00:00.000Z
Reasoning: This intercept shows a strong silver grade over a good width for a tailings project, contributing positively to the overall grade profile and supporting the maiden resource estimate.
Positive factors
- Strong silver grade for tailings project
- True width disclosed
- Maiden drill program
- QA/QC disclosed
Evidence · table
“66.66”
Context: 1.88
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 1.88
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "Links: https://brixtonmetals.com/wp-content/uploads/2026/09/Figure-1_8Sept2026.png https://brixtonmetals.com/wp-content/"
LT-26-078Langis · silverGrade: 62.4Grade Unit: g/tIntercept: 1 mView all detailsHide details
Identity
- Hole ID
- LT-26-078
- Project
- Langis
- Commodity
- silver
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- BBB
Geometry
- Grade
- 62.4
- Grade Unit
- g/t
- Intercept
- 1 m
- True Width
- 1 m
- From
- 0 m
- To
- 1 m
- Hole Depth
- 3.05 m
- Intercept Depth
- 0 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- LT-26-078:0-1
Location
- Easting
- 606559
- Northing
- 5270962
- CRS
- NAD83 UTM Zone 17N
- EPSG
- 26917
- Elevation
- 193 m
- Azimuth
- 0 °
- Dip
- -90 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Laboratories Inc.
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-08T00:00:00.000Z
Reasoning: This intercept shows a strong silver grade over a short width for a tailings project, contributing positively to the overall grade profile and supporting the maiden resource estimate.
Positive factors
- Strong silver grade for tailings project
- True width disclosed
- Maiden drill program
- QA/QC disclosed
Evidence · table
“62.40”
Context: 1.00
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 1
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "Links: https://brixtonmetals.com/wp-content/uploads/2026/09/Figure-1_8Sept2026.png https://brixtonmetals.com/wp-content/"
LT-26-079Langis · silverGrade: 68.7Grade Unit: g/tIntercept: 0.45 mView all detailsHide details
Identity
- Hole ID
- LT-26-079
- Project
- Langis
- Commodity
- silver
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- BBB
Geometry
- Grade
- 68.7
- Grade Unit
- g/t
- Intercept
- 0.45 m
- True Width
- 0.45 m
- From
- 0 m
- To
- 0.45 m
- Hole Depth
- 3.05 m
- Intercept Depth
- 0 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- LT-26-079:0-0.45
Location
- Easting
- 606517
- Northing
- 5270964
- CRS
- NAD83 UTM Zone 17N
- EPSG
- 26917
- Elevation
- 193 m
- Azimuth
- 0 °
- Dip
- -90 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Laboratories Inc.
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-08T00:00:00.000Z
Reasoning: This intercept shows a strong silver grade over a very short width for a tailings project, contributing positively to the overall grade profile and supporting the maiden resource estimate.
Positive factors
- Strong silver grade for tailings project
- True width disclosed
- Maiden drill program
- QA/QC disclosed
Evidence · table
“68.70”
Context: 0.45
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 0.45
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "Links: https://brixtonmetals.com/wp-content/uploads/2026/09/Figure-1_8Sept2026.png https://brixtonmetals.com/wp-content/"
LT-26-080Langis · silverGrade: 58.83Grade Unit: g/tIntercept: 0.75 mView all detailsHide details
Identity
- Hole ID
- LT-26-080
- Project
- Langis
- Commodity
- silver
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- BBB
Geometry
- Grade
- 58.83
- Grade Unit
- g/t
- Intercept
- 0.75 m
- True Width
- 0.75 m
- From
- 0 m
- To
- 0.75 m
- Hole Depth
- 3.05 m
- Intercept Depth
- 0 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- LT-26-080:0-0.75
Location
- Easting
- 606474
- Northing
- 5270971
- CRS
- NAD83 UTM Zone 17N
- EPSG
- 26917
- Elevation
- 192 m
- Azimuth
- 0 °
- Dip
- -90 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Laboratories Inc.
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-08T00:00:00.000Z
Reasoning: This intercept shows a strong silver grade over a short width for a tailings project, contributing positively to the overall grade profile and supporting the maiden resource estimate.
Positive factors
- Strong silver grade for tailings project
- True width disclosed
- Maiden drill program
- QA/QC disclosed
Evidence · table
“58.83”
Context: 0.75
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 0.75
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "Links: https://brixtonmetals.com/wp-content/uploads/2026/09/Figure-1_8Sept2026.png https://brixtonmetals.com/wp-content/"
LT-26-081Langis · silverGrade: 52.6Grade Unit: g/tIntercept: 1.5 mView all detailsHide details
Identity
- Hole ID
- LT-26-081
- Project
- Langis
- Commodity
- silver
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- BBB
Geometry
- Grade
- 52.6
- Grade Unit
- g/t
- Intercept
- 1.5 m
- True Width
- 1.5 m
- From
- 0 m
- To
- 1.5 m
- Hole Depth
- 3.05 m
- Intercept Depth
- 0 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- LT-26-081:0-1.5
Location
- Easting
- 606794
- Northing
- 5270821
- CRS
- NAD83 UTM Zone 17N
- EPSG
- 26917
- Elevation
- 199 m
- Azimuth
- 0 °
- Dip
- -90 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Laboratories Inc.
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-08T00:00:00.000Z
Reasoning: This intercept shows a moderate silver grade over a good width for a tailings project, contributing to the overall consistent grade profile and supporting the maiden resource estimate.
Positive factors
- Consistent silver grade for tailings project
- True width disclosed
- Maiden drill program
- QA/QC disclosed
Evidence · table
“52.60”
Context: 1.50
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 1.5
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "Links: https://brixtonmetals.com/wp-content/uploads/2026/09/Figure-1_8Sept2026.png https://brixtonmetals.com/wp-content/"
LT-26-082Langis · silverGrade: 147Grade Unit: g/tIntercept: 1.75 mView all detailsHide details
Identity
- Hole ID
- LT-26-082
- Project
- Langis
- Commodity
- silver
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- BBB
Geometry
- Grade
- 147
- Grade Unit
- g/t
- Intercept
- 1.75 m
- True Width
- 1.75 m
- From
- 0 m
- To
- 1.75 m
- Hole Depth
- 3.05 m
- Intercept Depth
- 0 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- LT-26-082:0-1.75
Location
- Easting
- 606798
- Northing
- 5270836
- CRS
- NAD83 UTM Zone 17N
- EPSG
- 26917
- Elevation
- 202 m
- Azimuth
- 0 °
- Dip
- -90 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Laboratories Inc.
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-08T00:00:00.000Z
Reasoning: This intercept shows a high silver grade over a good width for a tailings project, significantly contributing to the overall grade profile and supporting the maiden resource estimate.
Positive factors
- High silver grade for tailings project
- True width disclosed
- Maiden drill program
- QA/QC disclosed
Evidence · table
“147.00”
Context: 1.75
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 1.75
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "Links: https://brixtonmetals.com/wp-content/uploads/2026/09/Figure-1_8Sept2026.png https://brixtonmetals.com/wp-content/"
LT-26-083Langis · silverGrade: 130Grade Unit: g/tIntercept: 0.3 mView all detailsHide details
Identity
- Hole ID
- LT-26-083
- Project
- Langis
- Commodity
- silver
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- BBB
Geometry
- Grade
- 130
- Grade Unit
- g/t
- Intercept
- 0.3 m
- True Width
- 0.3 m
- From
- 0 m
- To
- 0.3 m
- Hole Depth
- 3.05 m
- Intercept Depth
- 0 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- LT-26-083:0-0.3
Location
- Easting
- 606751
- Northing
- 5270853
- CRS
- NAD83 UTM Zone 17N
- EPSG
- 26917
- Elevation
- 194 m
- Azimuth
- 0 °
- Dip
- -90 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Laboratories Inc.
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-08T00:00:00.000Z
Reasoning: This high-grade silver intercept, though short, contributes to the overall positive results from the maiden tailings drill program, indicating zones of higher concentration.
Positive factors
- High silver grade for tailings project
- True width disclosed
- Maiden drill program
- QA/QC disclosed
Evidence · table
“130.00”
Context: 0.30
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 0.3
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "Links: https://brixtonmetals.com/wp-content/uploads/2026/09/Figure-1_8Sept2026.png https://brixtonmetals.com/wp-content/"
LT-26-084Langis · silverGrade: 148Grade Unit: g/tIntercept: 0.4 mView all detailsHide details
Identity
- Hole ID
- LT-26-084
- Project
- Langis
- Commodity
- silver
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- BBB
Geometry
- Grade
- 148
- Grade Unit
- g/t
- Intercept
- 0.4 m
- True Width
- 0.4 m
- From
- 0 m
- To
- 0.4 m
- Hole Depth
- 3.05 m
- Intercept Depth
- 0 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- LT-26-084:0-0.4
Location
- Easting
- 606775
- Northing
- 5270864
- CRS
- NAD83 UTM Zone 17N
- EPSG
- 26917
- Elevation
- 199 m
- Azimuth
- 0 °
- Dip
- -90 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Laboratories Inc.
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-08T00:00:00.000Z
Reasoning: This high-grade silver intercept, though short, contributes to the overall positive results from the maiden tailings drill program, indicating zones of higher concentration.
Positive factors
- High silver grade for tailings project
- True width disclosed
- Maiden drill program
- QA/QC disclosed
Evidence · table
“148.00”
Context: 0.40
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 0.4
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "Links: https://brixtonmetals.com/wp-content/uploads/2026/09/Figure-1_8Sept2026.png https://brixtonmetals.com/wp-content/"
LT-26-085Langis · silverGrade: 139Grade Unit: g/tIntercept: 0.09 mView all detailsHide details
Identity
- Hole ID
- LT-26-085
- Project
- Langis
- Commodity
- silver
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- BBB
Geometry
- Grade
- 139
- Grade Unit
- g/t
- Intercept
- 0.09 m
- True Width
- 0.09 m
- From
- 0 m
- To
- 0.09 m
- Hole Depth
- 3.05 m
- Intercept Depth
- 0 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- LT-26-085:0-0.09
Location
- Easting
- 606787
- Northing
- 5270851
- CRS
- NAD83 UTM Zone 17N
- EPSG
- 26917
- Elevation
- 199 m
- Azimuth
- 0 °
- Dip
- -90 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Laboratories Inc.
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-08T00:00:00.000Z
Reasoning: This high-grade silver intercept, though very short, contributes to the overall positive results from the maiden tailings drill program, indicating zones of higher concentration.
Positive factors
- High silver grade for tailings project
- True width disclosed
- Maiden drill program
- QA/QC disclosed
Evidence · table
“139.00”
Context: 0.09
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 0.09
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "Links: https://brixtonmetals.com/wp-content/uploads/2026/09/Figure-1_8Sept2026.png https://brixtonmetals.com/wp-content/"
How Atlas produces this analysis
Minestarters Atlas uses automated extraction to summarize mining announcements, identify reported measurements, and classify supporting evidence. Sentiment reflects the extracted narrative and classification rules; it is an interpretation, not a reported measurement. Evidence quotes and context are provided where available. Missing data, low-confidence results, and review flags indicate limitations. Check the original publisher announcement before relying on an interpretation.