# Brixton Metals Drills 13.0m of 594 g/t Silver Including 0.5m of 7,900 g/t Silver at its Langis Project

Canonical Atlas analysis: https://atlas-staging.minestarters.com/news/brixton-metals-drills-13-0m-of-594-g-t-silver-including-0-5m-of-7-900-g-t-silver--08bd3a14-a787-4b34-b0bd-ba471da234a5

Original source: https://money.tmx.com/en/quote/BBB/news/8351608716438658/brixton-metals-drills-13-0m-of-594-g-t-silver-including-0-5m-of-7-900-g-t-silver

Publisher: tmx

Original announcement: 2026-05-11T11:30:00.000Z

Analysis by Minestarters Atlas

Atlas analysis published: Unknown date

Atlas analysis updated: Unknown date

- Company: Brixton Metals Corporation

- Ticker: BBB

- Exchange: TSX

- Region: Ontario, Canada

- Primary commodity: Silver

- Secondary commodities: None reported

- Document categories: Drill results

- Extracted: 2026-08-21 02:22:56 UTC

Narrative sentiment: 0.90 · Bullish

## Minestarters Atlas summary

Brixton Metals announced high-grade silver drill results from its Langis Project, highlighted by 13.0m of 594 g/t silver, including 0.5m of 7,900 g/t silver, in hole LM-26-350. These intercepts are from the S6-SE target area, which shows strong potential for new high-grade discoveries with limited historic workings. The company plans to accelerate drilling to advance towards a maiden resource estimate.

Reasoning: Brixton Metals reported exceptional high-grade silver intercepts, including a bonanza grade of 7,900 g/t silver over 0.5m and 594 g/t silver over 13.0m, from its Langis Project. These results represent a significant step-out and expansion opportunity in a previously underexplored area \(S6-SE\), indicating strong potential for new high-grade discoveries. The company has disclosed robust QA/QC protocols and a Qualified Person sign-off, although true widths have not yet been determined for the reported intervals.

- Positive factor: bonanza\_grade\_intercept

- Positive factor: high\_grade\_width\_product

- Positive factor: step\_out\_extension

- Positive factor: new\_zone\_potential

- Positive factor: qaqc\_disclosed

- Positive factor: qp\_signed

- Negative factor: apparent\_width\_only

Facts used in scoring: 34

## Classification and evidence

**QA/QC Disclosed**

Polarity: positive

Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\).

Why it applies: The release includes a dedicated 'Quality Assurance & Quality Control' section detailing procedures, lab accreditations, and QP sign-off.

Evidence · text

> Quality Assurance & Quality Control Quality assurance and quality control protocols for drill core sampling were developed by Brixton. Core samples were mostly taken at 1.5m intervals. High-grade intervals were taken at 0.50m to 1.00m intervals. Blank, duplicate \(lab pulp\), and certified reference materials were inserted at a combined rate of up to 15%. Core samples were cut in half, bagged, zip-tied, and sent directly to the ALS Minerals preparation facility in Sudbury, Ontario. ALS Minerals Laboratories is registered to ISO 9001:2008 and ISO 17025 accreditations for laboratory procedures. Samples were analyzed at ALS Laboratory Facilities in North Vancouver, British Columbia, for gold by fire assay with an atomic absorption finish. Ag, Pb, Cu, and Zn, as well as 48 additional elements, were analyzed using a four-acid digestion with an ICP-MS finish. Overlimits for silver were analyzed using fire assay and gravimetric finish, and/or fire assay and gravimetric finish on concentrates. The certified reference materials were acquired from CDN Resource Laboratories Ltd. of Langley, British Columbia, and the standards inserted varied with the type and abundance of mineralization observed in the primary sample. Blank material used consisted of non-mineralized siliceous landscaping rock. A copy of the QAQC protocols is available on the Company’s website. Qualified Person \(QP\) Mr. Martin Ethier, P.Geo., is a consultant for the Company who is a Qualified Person as defined by National Instrument 43-101. Mr. Ethier has verified the referenced data and analytical results disclosed in this press release and has approved the technical information presented herein.

**QP/CP Signed**

Polarity: positive

Story-specific tag

Definition: Qualified Person \(QP\) or Competent Person \(CP\) named and signed off — a member of a recognized professional association \(e.g., AusIMM, SME, AIG, P.Geo\) with relevant experience.

Why it applies: Mr. Martin Ethier, P.Geo., is explicitly named as a Qualified Person who has verified and approved the technical information in the press release.

Evidence · text

> Mr. Martin Ethier, P.Geo., is a consultant for the Company who is a Qualified Person as defined by National Instrument 43-101. Mr. Ethier has verified the referenced data and analytical results disclosed in this press release and has approved the technical information presented herein.

**Infill Drilling**

Polarity: neutral

Definition: Confirmatory drilling to raise resource confidence, not new discovery.

Why it applies: The drill campaign is explicitly targeting 'infill' of established high-grade silver zones.

Evidence · text

> The 2026 drill campaign marks a significant milestone, targeting both infill and expansion of established high-grade silver zones.

## Extracted facts

Stored fact records: 34. Some facts used in scoring do not have a stored record.

## Drill Results (34)

### LM-26-289

[Link to this fact](https://atlas-staging.minestarters.com/news/brixton-metals-drills-13-0m-of-594-g-t-silver-including-0-5m-of-7-900-g-t-silver--08bd3a14-a787-4b34-b0bd-ba471da234a5#fact-drill-facts-0)

S6-S · silver

#### Identity

- Hole ID: LM-26-289
- Project: S6-S
- Commodity: silver
- Region: canada\_on
- Reported Region: Ontario, Canada
- Ticker: BBB

#### Geometry

- Grade: 115.4
- Grade Unit: g/t
- Intercept: 6 m
- From: 141 m
- To: 147 m
- Hole Depth: 198 m

#### Classification

- Deposit Type: epithermal
- Program: mixed
- Sample Type: drill
- Mining Method: underground

#### Location

- Easting: 607374
- Northing: 5270726
- CRS: UTM
- Elevation: 214.1 m
- Azimuth: 90 °
- Dip: -45 °
- Loc. Confidence: high

#### QA/QC

- Laboratory: ALS Minerals
- QA/QC Disclosed: Yes
- Lab Certified: Yes
- QP Signed: Yes
- QA/QC Methods: blanks, duplicates, standards

#### Review

- Needs Review: No
- Interp. Status: scored
- Historical: No

#### Dates

- Event date: 2026-05-11T00:00:00.000Z

Reasoning: This intercept of 6.0m at 115.4 g/t silver is a moderate grade for an epithermal silver deposit, falling above the weak threshold but below the strong threshold. It contributes to the overall resource definition but is not a highlight. True width is not determined.

- Positive factor: qaqc\_disclosed

- Positive factor: qp\_signed

- Negative factor: apparent\_width\_only

Evidence · table

> 115.40

Context: 6.00

#### Rejected tags

**Apparent Width Only** — Rejected; excluded from scoring

Polarity: negative

Definition: Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.

Reason: The document explicitly states that the true width of the mineralized intervals has not yet been determined.

Evidence · text

> Reported intervals are drilling length, and the true width of the mineralized intervals has not yet been determined

### LM-26-289

[Link to this fact](https://atlas-staging.minestarters.com/news/brixton-metals-drills-13-0m-of-594-g-t-silver-including-0-5m-of-7-900-g-t-silver--08bd3a14-a787-4b34-b0bd-ba471da234a5#fact-drill-facts-1)

S6-S · silver

#### Identity

- Hole ID: LM-26-289
- Project: S6-S
- Commodity: silver
- Region: canada\_on
- Reported Region: Ontario, Canada
- Ticker: BBB

#### Geometry

- Grade: 1130
- Grade Unit: g/t
- Intercept: 0.5 m
- From: 142.5 m
- To: 143 m
- Hole Depth: 198 m

#### Classification

- Deposit Type: epithermal
- Program: mixed
- Sample Type: drill
- Group ID: LM-26-289:142.5-143.0
- Mining Method: underground

#### Location

- Easting: 607374
- Northing: 5270726
- CRS: UTM
- Elevation: 214.1 m
- Azimuth: 90 °
- Dip: -45 °
- Loc. Confidence: high

#### QA/QC

- Laboratory: ALS Minerals
- QA/QC Disclosed: Yes
- Lab Certified: Yes
- QP Signed: Yes
- QA/QC Methods: blanks, duplicates, standards

#### Review

- Needs Review: No
- Interp. Status: scored
- Historical: No

#### Dates

- Event date: 2026-05-11T00:00:00.000Z

Reasoning: This sub-interval of 0.5m at 1130 g/t silver is an exceptional grade for an epithermal silver deposit, significantly exceeding the 500 g/t threshold. While narrow, it indicates high-grade mineralization within the broader interval. True width is not determined.

- Positive factor: high\_grade\_intercept

- Positive factor: qaqc\_disclosed

- Positive factor: qp\_signed

- Negative factor: apparent\_width\_only

Evidence · table

> 1130.00

Context: 0.50

#### Rejected tags

**Apparent Width Only** — Rejected; excluded from scoring

Polarity: negative

Definition: Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.

Reason: The document explicitly states that the true width of the mineralized intervals has not yet been determined.

Evidence · text

> Reported intervals are drilling length, and the true width of the mineralized intervals has not yet been determined

### LM-26-289

[Link to this fact](https://atlas-staging.minestarters.com/news/brixton-metals-drills-13-0m-of-594-g-t-silver-including-0-5m-of-7-900-g-t-silver--08bd3a14-a787-4b34-b0bd-ba471da234a5#fact-drill-facts-2)

S6-S · silver

#### Identity

- Hole ID: LM-26-289
- Project: S6-S
- Commodity: silver
- Region: canada\_on
- Reported Region: Ontario, Canada
- Ticker: BBB

#### Geometry

- Grade: 76.41
- Grade Unit: g/t
- Intercept: 2 m
- From: 172 m
- To: 174 m
- Hole Depth: 198 m

#### Classification

- Deposit Type: epithermal
- Program: mixed
- Sample Type: drill
- Mining Method: underground

#### Location

- Easting: 607374
- Northing: 5270726
- CRS: UTM
- Elevation: 214.1 m
- Azimuth: 90 °
- Dip: -45 °
- Loc. Confidence: high

#### QA/QC

- Laboratory: ALS Minerals
- QA/QC Disclosed: Yes
- Lab Certified: Yes
- QP Signed: Yes
- QA/QC Methods: blanks, duplicates, standards

#### Review

- Needs Review: No
- Interp. Status: scored
- Historical: No

#### Dates

- Event date: 2026-05-11T00:00:00.000Z

Reasoning: This intercept of 2.0m at 76.41 g/t silver is a weak to moderate grade for an epithermal silver deposit, falling above the weak threshold but below the moderate threshold. True width is not determined.

- Positive factor: qaqc\_disclosed

- Positive factor: qp\_signed

- Negative factor: apparent\_width\_only

Evidence · table

> 76.41

Context: 2.00

#### Rejected tags

**Apparent Width Only** — Rejected; excluded from scoring

Polarity: negative

Definition: Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.

Reason: The document explicitly states that the true width of the mineralized intervals has not yet been determined.

Evidence · text

> Reported intervals are drilling length, and the true width of the mineralized intervals has not yet been determined

### LM-26-332

[Link to this fact](https://atlas-staging.minestarters.com/news/brixton-metals-drills-13-0m-of-594-g-t-silver-including-0-5m-of-7-900-g-t-silver--08bd3a14-a787-4b34-b0bd-ba471da234a5#fact-drill-facts-3)

S6-S · silver

#### Identity

- Hole ID: LM-26-332
- Project: S6-S
- Commodity: silver
- Region: canada\_on
- Reported Region: Ontario, Canada
- Ticker: BBB

#### Geometry

- Grade: 76.67
- Grade Unit: g/t
- Intercept: 4.25 m
- From: 83.75 m
- To: 88 m
- Hole Depth: 201 m

#### Classification

- Deposit Type: epithermal
- Program: mixed
- Sample Type: drill
- Mining Method: underground

#### Location

- Easting: 607385
- Northing: 5270770
- CRS: UTM
- Elevation: 214.9 m
- Azimuth: 85 °
- Dip: -55 °
- Loc. Confidence: high

#### QA/QC

- Laboratory: ALS Minerals
- QA/QC Disclosed: Yes
- Lab Certified: Yes
- QP Signed: Yes
- QA/QC Methods: blanks, duplicates, standards

#### Review

- Needs Review: No
- Interp. Status: scored
- Historical: No

#### Dates

- Event date: 2026-05-11T00:00:00.000Z

Reasoning: This intercept of 4.25m at 76.67 g/t silver is a weak to moderate grade for an epithermal silver deposit, falling above the weak threshold but below the moderate threshold. True width is not determined.

- Positive factor: qaqc\_disclosed

- Positive factor: qp\_signed

- Negative factor: apparent\_width\_only

Evidence · table

> 76.67

Context: 4.25

#### Rejected tags

**Apparent Width Only** — Rejected; excluded from scoring

Polarity: negative

Definition: Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.

Reason: The document explicitly states that the true width of the mineralized intervals has not yet been determined.

Evidence · text

> Reported intervals are drilling length, and the true width of the mineralized intervals has not yet been determined

### LM-26-332

[Link to this fact](https://atlas-staging.minestarters.com/news/brixton-metals-drills-13-0m-of-594-g-t-silver-including-0-5m-of-7-900-g-t-silver--08bd3a14-a787-4b34-b0bd-ba471da234a5#fact-drill-facts-4)

S6-S · silver

#### Identity

- Hole ID: LM-26-332
- Project: S6-S
- Commodity: silver
- Region: canada\_on
- Reported Region: Ontario, Canada
- Ticker: BBB

#### Geometry

- Grade: 480
- Grade Unit: g/t
- Intercept: 0.5 m
- From: 101 m
- To: 101.5 m
- Hole Depth: 201 m

#### Classification

- Deposit Type: epithermal
- Program: mixed
- Sample Type: drill
- Group ID: LM-26-332:101.0-101.5
- Mining Method: underground

#### Location

- Easting: 607385
- Northing: 5270770
- CRS: UTM
- Elevation: 214.9 m
- Azimuth: 85 °
- Dip: -55 °
- Loc. Confidence: high

#### QA/QC

- Laboratory: ALS Minerals
- QA/QC Disclosed: Yes
- Lab Certified: Yes
- QP Signed: Yes
- QA/QC Methods: blanks, duplicates, standards

#### Review

- Needs Review: No
- Interp. Status: scored
- Historical: No

#### Dates

- Event date: 2026-05-11T00:00:00.000Z

Reasoning: This intercept of 0.5m at 480 g/t silver is a strong grade for an epithermal silver deposit, approaching the exceptional threshold. While narrow, it indicates high-grade mineralization. True width is not determined.

- Positive factor: high\_grade\_intercept

- Positive factor: qaqc\_disclosed

- Positive factor: qp\_signed

- Negative factor: apparent\_width\_only

Evidence · table

> 480.00

Context: 0.50

#### Rejected tags

**Apparent Width Only** — Rejected; excluded from scoring

Polarity: negative

Definition: Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.

Reason: The document explicitly states that the true width of the mineralized intervals has not yet been determined.

Evidence · text

> Reported intervals are drilling length, and the true width of the mineralized intervals has not yet been determined

### LM-26-350

[Link to this fact](https://atlas-staging.minestarters.com/news/brixton-metals-drills-13-0m-of-594-g-t-silver-including-0-5m-of-7-900-g-t-silver--08bd3a14-a787-4b34-b0bd-ba471da234a5#fact-drill-facts-5)

S6-SE · silver

#### Identity

- Hole ID: LM-26-350
- Project: S6-SE
- Commodity: silver
- Region: canada\_on
- Reported Region: Ontario, Canada
- Ticker: BBB

#### Geometry

- Grade: 200.11
- Grade Unit: g/t
- Intercept: 40 m
- From: 176 m
- To: 216 m
- Hole Depth: 258 m

#### Classification

- Deposit Type: epithermal
- Program: exploration
- Sample Type: drill
- Mining Method: underground

#### Location

- Easting: 607480
- Northing: 5270820
- CRS: UTM
- Elevation: 218.1 m
- Azimuth: 95 °
- Dip: -50 °
- Loc. Confidence: high

#### QA/QC

- Laboratory: ALS Minerals
- QA/QC Disclosed: Yes
- Lab Certified: Yes
- QP Signed: Yes
- QA/QC Methods: blanks, duplicates, standards

#### Review

- Needs Review: No
- Interp. Status: scored
- Historical: No

#### Dates

- Event date: 2026-05-11T00:00:00.000Z

Reasoning: This intercept of 40.0m at 200.11 g/t silver is a strong grade and exceptional grade-width product \(8004.4 g/t·m\) for an epithermal silver deposit. It represents a significant expansion in the S6-SE area, which has limited historic drilling. True width is not determined.

- Positive factor: strong\_grade\_intercept

- Positive factor: high\_grade\_width\_product

- Positive factor: step\_out\_extension

- Positive factor: new\_zone\_potential

- Positive factor: qaqc\_disclosed

- Positive factor: qp\_signed

- Negative factor: apparent\_width\_only

Evidence · table

> 200.11

Context: 40.00

#### Rejected tags

**Step-Out Extension** — Rejected; excluded from scoring

Polarity: positive

Definition: Mineralization extended beyond the previously known limit.

Reason: The intercept is located in the S6-SE target area, which is described as a 'meaningful expansion opportunity' and has 'limited historic mine workings and historic drilling', indicating an extension beyond previously known limits.

Evidence · text

> The latest results from hole LM-26-350 confirm the S6-SE target area as a meaningful expansion opportunity within the general Shaft 6 zone at the Langis Project

**Apparent Width Only** — Rejected; excluded from scoring

Polarity: negative

Definition: Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.

Reason: The document explicitly states that the true width of the mineralized intervals has not yet been determined.

Evidence · text

> Reported intervals are drilling length, and the true width of the mineralized intervals has not yet been determined

### LM-26-350

[Link to this fact](https://atlas-staging.minestarters.com/news/brixton-metals-drills-13-0m-of-594-g-t-silver-including-0-5m-of-7-900-g-t-silver--08bd3a14-a787-4b34-b0bd-ba471da234a5#fact-drill-facts-6)

S6-SE · silver

#### Identity

- Hole ID: LM-26-350
- Project: S6-SE
- Commodity: silver
- Region: canada\_on
- Reported Region: Ontario, Canada
- Ticker: BBB

#### Geometry

- Grade: 594.43
- Grade Unit: g/t
- Intercept: 13 m
- From: 193 m
- To: 206 m
- Hole Depth: 258 m

#### Classification

- Deposit Type: epithermal
- Program: exploration
- Sample Type: drill
- Group ID: LM-26-350:193.0-206.0
- Mining Method: underground

#### Location

- Easting: 607480
- Northing: 5270820
- CRS: UTM
- Elevation: 218.1 m
- Azimuth: 95 °
- Dip: -50 °
- Loc. Confidence: high

#### QA/QC

- Laboratory: ALS Minerals
- QA/QC Disclosed: Yes
- Lab Certified: Yes
- QP Signed: Yes
- QA/QC Methods: blanks, duplicates, standards

#### Review

- Needs Review: No
- Interp. Status: scored
- Historical: No

#### Dates

- Event date: 2026-05-11T00:00:00.000Z

Reasoning: This sub-interval of 13.0m at 594.43 g/t silver is an exceptional grade and exceptional grade-width product \(7727.59 g/t·m\) for an epithermal silver deposit, significantly exceeding the 500 g/t threshold. It represents a significant expansion in the S6-SE area, which has limited historic drilling. True width is not determined.

- Positive factor: exceptional\_grade\_intercept

- Positive factor: high\_grade\_width\_product

- Positive factor: step\_out\_extension

- Positive factor: new\_zone\_potential

- Positive factor: qaqc\_disclosed

- Positive factor: qp\_signed

- Negative factor: apparent\_width\_only

Evidence · table

> 594.43

Context: 13.00

#### Rejected tags

**Step-Out Extension** — Rejected; excluded from scoring

Polarity: positive

Definition: Mineralization extended beyond the previously known limit.

Reason: The intercept is located in the S6-SE target area, which is described as a 'meaningful expansion opportunity' and has 'limited historic mine workings and historic drilling', indicating an extension beyond previously known limits.

Evidence · text

> The latest results from hole LM-26-350 confirm the S6-SE target area as a meaningful expansion opportunity within the general Shaft 6 zone at the Langis Project

**Apparent Width Only** — Rejected; excluded from scoring

Polarity: negative

Definition: Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.

Reason: The document explicitly states that the true width of the mineralized intervals has not yet been determined.

Evidence · text

> Reported intervals are drilling length, and the true width of the mineralized intervals has not yet been determined

### LM-26-350

[Link to this fact](https://atlas-staging.minestarters.com/news/brixton-metals-drills-13-0m-of-594-g-t-silver-including-0-5m-of-7-900-g-t-silver--08bd3a14-a787-4b34-b0bd-ba471da234a5#fact-drill-facts-7)

S6-SE · silver

#### Identity

- Hole ID: LM-26-350
- Project: S6-SE
- Commodity: silver
- Region: canada\_on
- Reported Region: Ontario, Canada
- Ticker: BBB

#### Geometry

- Grade: 873
- Grade Unit: g/t
- Intercept: 2 m
- From: 193 m
- To: 195 m
- Hole Depth: 258 m

#### Classification

- Deposit Type: epithermal
- Program: exploration
- Sample Type: drill
- Group ID: LM-26-350:193.0-195.0
- Mining Method: underground

#### Location

- Easting: 607480
- Northing: 5270820
- CRS: UTM
- Elevation: 218.1 m
- Azimuth: 95 °
- Dip: -50 °
- Loc. Confidence: high

#### QA/QC

- Laboratory: ALS Minerals
- QA/QC Disclosed: Yes
- Lab Certified: Yes
- QP Signed: Yes
- QA/QC Methods: blanks, duplicates, standards

#### Review

- Needs Review: No
- Interp. Status: scored
- Historical: No

#### Dates

- Event date: 2026-05-11T00:00:00.000Z

Reasoning: This sub-interval of 2.0m at 873 g/t silver is an exceptional grade and strong grade-width product \(1746 g/t·m\) for an epithermal silver deposit, significantly exceeding the 500 g/t threshold. It contributes to the significant expansion in the S6-SE area. True width is not determined.

- Positive factor: exceptional\_grade\_intercept

- Positive factor: high\_grade\_width\_product

- Positive factor: step\_out\_extension

- Positive factor: new\_zone\_potential

- Positive factor: qaqc\_disclosed

- Positive factor: qp\_signed

- Negative factor: apparent\_width\_only

Evidence · table

> 873.00

Context: 2.00

#### Rejected tags

**Step-Out Extension** — Rejected; excluded from scoring

Polarity: positive

Definition: Mineralization extended beyond the previously known limit.

Reason: The intercept is located in the S6-SE target area, which is described as a 'meaningful expansion opportunity' and has 'limited historic mine workings and historic drilling', indicating an extension beyond previously known limits.

Evidence · text

> The latest results from hole LM-26-350 confirm the S6-SE target area as a meaningful expansion opportunity within the general Shaft 6 zone at the Langis Project

**Apparent Width Only** — Rejected; excluded from scoring

Polarity: negative

Definition: Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.

Reason: The document explicitly states that the true width of the mineralized intervals has not yet been determined.

Evidence · text

> Reported intervals are drilling length, and the true width of the mineralized intervals has not yet been determined

### LM-26-350

[Link to this fact](https://atlas-staging.minestarters.com/news/brixton-metals-drills-13-0m-of-594-g-t-silver-including-0-5m-of-7-900-g-t-silver--08bd3a14-a787-4b34-b0bd-ba471da234a5#fact-drill-facts-8)

S6-SE · silver

#### Identity

- Hole ID: LM-26-350
- Project: S6-SE
- Commodity: silver
- Region: canada\_on
- Reported Region: Ontario, Canada
- Ticker: BBB

#### Geometry

- Grade: 7900
- Grade Unit: g/t
- Intercept: 0.5 m
- From: 204.7 m
- To: 205.2 m
- Hole Depth: 258 m

#### Classification

- Deposit Type: epithermal
- Program: exploration
- Sample Type: drill
- Group ID: LM-26-350:204.7-205.2
- Mining Method: underground

#### Location

- Easting: 607480
- Northing: 5270820
- CRS: UTM
- Elevation: 218.1 m
- Azimuth: 95 °
- Dip: -50 °
- Loc. Confidence: high

#### QA/QC

- Laboratory: ALS Minerals
- QA/QC Disclosed: Yes
- Lab Certified: Yes
- QP Signed: Yes
- QA/QC Methods: blanks, duplicates, standards

#### Review

- Needs Review: No
- Interp. Status: scored
- Historical: No

#### Dates

- Event date: 2026-05-11T00:00:00.000Z

Reasoning: This sub-interval of 0.5m at 7,900 g/t silver is an exceptionally high-grade bonanza intercept, significantly exceeding the 500 g/t threshold and the 75th percentile of peer comparison. Its grade-width product \(3950 g/t·m\) is also very strong. It represents a significant expansion in the S6-SE area, which has limited historic drilling. True width is not determined.

- Positive factor: bonanza\_grade\_intercept

- Positive factor: high\_grade\_width\_product

- Positive factor: step\_out\_extension

- Positive factor: new\_zone\_potential

- Positive factor: qaqc\_disclosed

- Positive factor: qp\_signed

- Negative factor: apparent\_width\_only

Evidence · table

> 7900.00

Context: 0.50

#### Rejected tags

**Bonanza Intercept** — Rejected; excluded from scoring

Polarity: positive

Definition: Exceptionally high-grade zone, well above the deposit-type norm.

Reason: The intercept of 0.5m at 7,900 g/t silver is exceptionally high-grade, far exceeding the 500 g/t threshold for silver and the 75th percentile of peer comparison for epithermal silver deposits.

Evidence · table

> 7900.00

Context: 0.50

**Step-Out Extension** — Rejected; excluded from scoring

Polarity: positive

Definition: Mineralization extended beyond the previously known limit.

Reason: The intercept is located in the S6-SE target area, which is described as a 'meaningful expansion opportunity' and has 'limited historic mine workings and historic drilling', indicating an extension beyond previously known limits.

Evidence · text

> The latest results from hole LM-26-350 confirm the S6-SE target area as a meaningful expansion opportunity within the general Shaft 6 zone at the Langis Project

**Apparent Width Only** — Rejected; excluded from scoring

Polarity: negative

Definition: Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.

Reason: The document explicitly states that the true width of the mineralized intervals has not yet been determined.

Evidence · text

> Reported intervals are drilling length, and the true width of the mineralized intervals has not yet been determined

### LM-26-308

[Link to this fact](https://atlas-staging.minestarters.com/news/brixton-metals-drills-13-0m-of-594-g-t-silver-including-0-5m-of-7-900-g-t-silver--08bd3a14-a787-4b34-b0bd-ba471da234a5#fact-drill-facts-9)

S6-S · silver

#### Identity

- Hole ID: LM-26-308
- Project: S6-S
- Commodity: silver
- Region: canada\_on
- Reported Region: Ontario, Canada
- Ticker: BBB

#### Geometry

- Grade: 11.66
- Grade Unit: g/t
- Intercept: 2.7 m
- From: 97 m
- To: 99.7 m
- Hole Depth: 168 m

#### Classification

- Deposit Type: epithermal
- Program: mixed
- Sample Type: drill
- Mining Method: underground

#### Location

- Easting: 607385
- Northing: 5270685
- CRS: UTM
- Elevation: 214.1 m
- Azimuth: 95 °
- Dip: -60 °
- Loc. Confidence: high

#### QA/QC

- Laboratory: ALS Minerals
- QA/QC Disclosed: Yes
- Lab Certified: Yes
- QP Signed: Yes
- QA/QC Methods: blanks, duplicates, standards

#### Review

- Needs Review: No
- Interp. Status: scored
- Historical: No

#### Dates

- Event date: 2026-05-11T00:00:00.000Z

Reasoning: This intercept of 2.7m at 11.66 g/t silver is below the weak threshold \(30 g/t\) for an epithermal silver deposit, indicating low grade. True width is not determined.

- Positive factor: qaqc\_disclosed

- Positive factor: qp\_signed

- Negative factor: apparent\_width\_only

Evidence · table

> 11.66

Context: 2.70

#### Rejected tags

**Apparent Width Only** — Rejected; excluded from scoring

Polarity: negative

Definition: Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.

Reason: The document explicitly states that the true width of the mineralized intervals has not yet been determined.

Evidence · text

> Reported intervals are drilling length, and the true width of the mineralized intervals has not yet been determined

### LM-26-308

[Link to this fact](https://atlas-staging.minestarters.com/news/brixton-metals-drills-13-0m-of-594-g-t-silver-including-0-5m-of-7-900-g-t-silver--08bd3a14-a787-4b34-b0bd-ba471da234a5#fact-drill-facts-10)

S6-S · silver

#### Identity

- Hole ID: LM-26-308
- Project: S6-S
- Commodity: silver
- Region: canada\_on
- Reported Region: Ontario, Canada
- Ticker: BBB

#### Geometry

- Grade: 23.5
- Grade Unit: g/t
- Intercept: 0.5 m
- From: 97.85 m
- To: 98.35 m
- Hole Depth: 168 m

#### Classification

- Deposit Type: epithermal
- Program: mixed
- Sample Type: drill
- Group ID: LM-26-308:97.85-98.35
- Mining Method: underground

#### Location

- Easting: 607385
- Northing: 5270685
- CRS: UTM
- Elevation: 214.1 m
- Azimuth: 95 °
- Dip: -60 °
- Loc. Confidence: high

#### QA/QC

- Laboratory: ALS Minerals
- QA/QC Disclosed: Yes
- Lab Certified: Yes
- QP Signed: Yes
- QA/QC Methods: blanks, duplicates, standards

#### Review

- Needs Review: No
- Interp. Status: scored
- Historical: No

#### Dates

- Event date: 2026-05-11T00:00:00.000Z

Reasoning: This sub-interval of 0.5m at 23.5 g/t silver is below the weak threshold \(30 g/t\) for an epithermal silver deposit, indicating low grade. True width is not determined.

- Positive factor: qaqc\_disclosed

- Positive factor: qp\_signed

- Negative factor: apparent\_width\_only

Evidence · table

> 23.50

Context: 0.50

#### Rejected tags

**Apparent Width Only** — Rejected; excluded from scoring

Polarity: negative

Definition: Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.

Reason: The document explicitly states that the true width of the mineralized intervals has not yet been determined.

Evidence · text

> Reported intervals are drilling length, and the true width of the mineralized intervals has not yet been determined

### LM-26-309

[Link to this fact](https://atlas-staging.minestarters.com/news/brixton-metals-drills-13-0m-of-594-g-t-silver-including-0-5m-of-7-900-g-t-silver--08bd3a14-a787-4b34-b0bd-ba471da234a5#fact-drill-facts-11)

S6-S · silver

#### Identity

- Hole ID: LM-26-309
- Project: S6-S
- Commodity: silver
- Region: canada\_on
- Reported Region: Ontario, Canada
- Ticker: BBB

#### Geometry

- Grade: 62.83
- Grade Unit: g/t
- Intercept: 7.15 m
- From: 150 m
- To: 157.15 m
- Hole Depth: 210 m

#### Classification

- Deposit Type: epithermal
- Program: mixed
- Sample Type: drill
- Mining Method: underground

#### Location

- Easting: 607385
- Northing: 5270685
- CRS: UTM
- Elevation: 214.1 m
- Azimuth: 90 °
- Dip: -60 °
- Loc. Confidence: high

#### QA/QC

- Laboratory: ALS Minerals
- QA/QC Disclosed: Yes
- Lab Certified: Yes
- QP Signed: Yes
- QA/QC Methods: blanks, duplicates, standards

#### Review

- Needs Review: No
- Interp. Status: scored
- Historical: No

#### Dates

- Event date: 2026-05-11T00:00:00.000Z

Reasoning: This intercept of 7.15m at 62.83 g/t silver is a weak to moderate grade for an epithermal silver deposit, falling above the weak threshold but below the moderate threshold. True width is not determined.

- Positive factor: qaqc\_disclosed

- Positive factor: qp\_signed

- Negative factor: apparent\_width\_only

Evidence · table

> 62.83

Context: 7.15

#### Rejected tags

**Apparent Width Only** — Rejected; excluded from scoring

Polarity: negative

Definition: Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.

Reason: The document explicitly states that the true width of the mineralized intervals has not yet been determined.

Evidence · text

> Reported intervals are drilling length, and the true width of the mineralized intervals has not yet been determined

### LM-26-309

[Link to this fact](https://atlas-staging.minestarters.com/news/brixton-metals-drills-13-0m-of-594-g-t-silver-including-0-5m-of-7-900-g-t-silver--08bd3a14-a787-4b34-b0bd-ba471da234a5#fact-drill-facts-12)

S6-S · silver

#### Identity

- Hole ID: LM-26-309
- Project: S6-S
- Commodity: silver
- Region: canada\_on
- Reported Region: Ontario, Canada
- Ticker: BBB

#### Geometry

- Grade: 242
- Grade Unit: g/t
- Intercept: 0.6 m
- From: 156.55 m
- To: 157.15 m
- Hole Depth: 210 m

#### Classification

- Deposit Type: epithermal
- Program: mixed
- Sample Type: drill
- Group ID: LM-26-309:156.55-157.15
- Mining Method: underground

#### Location

- Easting: 607385
- Northing: 5270685
- CRS: UTM
- Elevation: 214.1 m
- Azimuth: 90 °
- Dip: -60 °
- Loc. Confidence: high

#### QA/QC

- Laboratory: ALS Minerals
- QA/QC Disclosed: Yes
- Lab Certified: Yes
- QP Signed: Yes
- QA/QC Methods: blanks, duplicates, standards

#### Review

- Needs Review: No
- Interp. Status: scored
- Historical: No

#### Dates

- Event date: 2026-05-11T00:00:00.000Z

Reasoning: This sub-interval of 0.6m at 242 g/t silver is a strong grade for an epithermal silver deposit, exceeding the 200 g/t threshold. While narrow, it indicates high-grade mineralization. True width is not determined.

- Positive factor: strong\_grade\_intercept

- Positive factor: qaqc\_disclosed

- Positive factor: qp\_signed

- Negative factor: apparent\_width\_only

Evidence · table

> 242.00

Context: 0.60

#### Rejected tags

**Apparent Width Only** — Rejected; excluded from scoring

Polarity: negative

Definition: Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.

Reason: The document explicitly states that the true width of the mineralized intervals has not yet been determined.

Evidence · text

> Reported intervals are drilling length, and the true width of the mineralized intervals has not yet been determined

### LM-26-313

[Link to this fact](https://atlas-staging.minestarters.com/news/brixton-metals-drills-13-0m-of-594-g-t-silver-including-0-5m-of-7-900-g-t-silver--08bd3a14-a787-4b34-b0bd-ba471da234a5#fact-drill-facts-13)

S6-S · silver

#### Identity

- Hole ID: LM-26-313
- Project: S6-S
- Commodity: silver
- Region: canada\_on
- Reported Region: Ontario, Canada
- Ticker: BBB

#### Geometry

- Grade: 18.7
- Grade Unit: g/t
- Intercept: 1 m
- From: 175 m
- To: 176 m
- Hole Depth: 207 m

#### Classification

- Deposit Type: epithermal
- Program: mixed
- Sample Type: drill
- Mining Method: underground

#### Location

- Easting: 607385
- Northing: 5270685
- CRS: UTM
- Elevation: 214.1 m
- Azimuth: 270 °
- Dip: -70 °
- Loc. Confidence: high

#### QA/QC

- Laboratory: ALS Minerals
- QA/QC Disclosed: Yes
- Lab Certified: Yes
- QP Signed: Yes
- QA/QC Methods: blanks, duplicates, standards

#### Review

- Needs Review: No
- Interp. Status: scored
- Historical: No

#### Dates

- Event date: 2026-05-11T00:00:00.000Z

Reasoning: This intercept of 1.0m at 18.7 g/t silver is below the weak threshold \(30 g/t\) for an epithermal silver deposit, indicating low grade. True width is not determined.

- Positive factor: qaqc\_disclosed

- Positive factor: qp\_signed

- Negative factor: apparent\_width\_only

Evidence · table

> 18.70

Context: 1.00

#### Rejected tags

**Apparent Width Only** — Rejected; excluded from scoring

Polarity: negative

Definition: Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.

Reason: The document explicitly states that the true width of the mineralized intervals has not yet been determined.

Evidence · text

> Reported intervals are drilling length, and the true width of the mineralized intervals has not yet been determined

### LM-26-314

[Link to this fact](https://atlas-staging.minestarters.com/news/brixton-metals-drills-13-0m-of-594-g-t-silver-including-0-5m-of-7-900-g-t-silver--08bd3a14-a787-4b34-b0bd-ba471da234a5#fact-drill-facts-14)

S6-S · silver

#### Identity

- Hole ID: LM-26-314
- Project: S6-S
- Commodity: silver
- Region: canada\_on
- Reported Region: Ontario, Canada
- Ticker: BBB

#### Geometry

- Grade: 47
- Grade Unit: g/t
- Intercept: 2 m
- From: 59 m
- To: 61 m
- Hole Depth: 198 m

#### Classification

- Deposit Type: epithermal
- Program: mixed
- Sample Type: drill
- Mining Method: underground

#### Location

- Easting: 607385
- Northing: 5270665
- CRS: UTM
- Elevation: 214.1 m
- Azimuth: 270 °
- Dip: -45 °
- Loc. Confidence: high

#### QA/QC

- Laboratory: ALS Minerals
- QA/QC Disclosed: Yes
- Lab Certified: Yes
- QP Signed: Yes
- QA/QC Methods: blanks, duplicates, standards

#### Review

- Needs Review: No
- Interp. Status: scored
- Historical: No

#### Dates

- Event date: 2026-05-11T00:00:00.000Z

Reasoning: This intercept of 2.0m at 47.0 g/t silver is a weak to moderate grade for an epithermal silver deposit, falling above the weak threshold but below the moderate threshold. True width is not determined.

- Positive factor: qaqc\_disclosed

- Positive factor: qp\_signed

- Negative factor: apparent\_width\_only

Evidence · table

> 47.00

Context: 2.00

#### Rejected tags

**Apparent Width Only** — Rejected; excluded from scoring

Polarity: negative

Definition: Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.

Reason: The document explicitly states that the true width of the mineralized intervals has not yet been determined.

Evidence · text

> Reported intervals are drilling length, and the true width of the mineralized intervals has not yet been determined

### LM-26-315

[Link to this fact](https://atlas-staging.minestarters.com/news/brixton-metals-drills-13-0m-of-594-g-t-silver-including-0-5m-of-7-900-g-t-silver--08bd3a14-a787-4b34-b0bd-ba471da234a5#fact-drill-facts-15)

S6-S · silver

#### Identity

- Hole ID: LM-26-315
- Project: S6-S
- Commodity: silver
- Region: canada\_on
- Reported Region: Ontario, Canada
- Ticker: BBB

#### Geometry

- Grade: 13.07
- Grade Unit: g/t
- Intercept: 30 m
- From: 137 m
- To: 167 m
- Hole Depth: 240 m

#### Classification

- Deposit Type: epithermal
- Program: mixed
- Sample Type: drill
- Mining Method: underground

#### Location

- Easting: 607385
- Northing: 5270665
- CRS: UTM
- Elevation: 214.1 m
- Azimuth: 90 °
- Dip: -60 °
- Loc. Confidence: high

#### QA/QC

- Laboratory: ALS Minerals
- QA/QC Disclosed: Yes
- Lab Certified: Yes
- QP Signed: Yes
- QA/QC Methods: blanks, duplicates, standards

#### Review

- Needs Review: No
- Interp. Status: scored
- Historical: No

#### Dates

- Event date: 2026-05-11T00:00:00.000Z

Reasoning: This intercept of 30.0m at 13.07 g/t silver is below the weak threshold \(30 g/t\) for an epithermal silver deposit, indicating low grade. True width is not determined.

- Positive factor: qaqc\_disclosed

- Positive factor: qp\_signed

- Negative factor: apparent\_width\_only

Evidence · table

> 13.07

Context: 30.00

#### Rejected tags

**Apparent Width Only** — Rejected; excluded from scoring

Polarity: negative

Definition: Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.

Reason: The document explicitly states that the true width of the mineralized intervals has not yet been determined.

Evidence · text

> Reported intervals are drilling length, and the true width of the mineralized intervals has not yet been determined

### LM-26-315

[Link to this fact](https://atlas-staging.minestarters.com/news/brixton-metals-drills-13-0m-of-594-g-t-silver-including-0-5m-of-7-900-g-t-silver--08bd3a14-a787-4b34-b0bd-ba471da234a5#fact-drill-facts-16)

S6-S · silver

#### Identity

- Hole ID: LM-26-315
- Project: S6-S
- Commodity: silver
- Region: canada\_on
- Reported Region: Ontario, Canada
- Ticker: BBB

#### Geometry

- Grade: 26.38
- Grade Unit: g/t
- Intercept: 7 m
- From: 137 m
- To: 144 m
- Hole Depth: 240 m

#### Classification

- Deposit Type: epithermal
- Program: mixed
- Sample Type: drill
- Group ID: LM-26-315:137.0-144.0
- Mining Method: underground

#### Location

- Easting: 607385
- Northing: 5270665
- CRS: UTM
- Elevation: 214.1 m
- Azimuth: 90 °
- Dip: -60 °
- Loc. Confidence: high

#### QA/QC

- Laboratory: ALS Minerals
- QA/QC Disclosed: Yes
- Lab Certified: Yes
- QP Signed: Yes
- QA/QC Methods: blanks, duplicates, standards

#### Review

- Needs Review: No
- Interp. Status: scored
- Historical: No

#### Dates

- Event date: 2026-05-11T00:00:00.000Z

Reasoning: This sub-interval of 7.0m at 26.38 g/t silver is below the weak threshold \(30 g/t\) for an epithermal silver deposit, indicating low grade. True width is not determined.

- Positive factor: qaqc\_disclosed

- Positive factor: qp\_signed

- Negative factor: apparent\_width\_only

Evidence · table

> 26.38

Context: 7.00

#### Rejected tags

**Apparent Width Only** — Rejected; excluded from scoring

Polarity: negative

Definition: Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.

Reason: The document explicitly states that the true width of the mineralized intervals has not yet been determined.

Evidence · text

> Reported intervals are drilling length, and the true width of the mineralized intervals has not yet been determined

### LM-26-316

[Link to this fact](https://atlas-staging.minestarters.com/news/brixton-metals-drills-13-0m-of-594-g-t-silver-including-0-5m-of-7-900-g-t-silver--08bd3a14-a787-4b34-b0bd-ba471da234a5#fact-drill-facts-17)

S6-S · silver

#### Identity

- Hole ID: LM-26-316
- Project: S6-S
- Commodity: silver
- Region: canada\_on
- Reported Region: Ontario, Canada
- Ticker: BBB

#### Geometry

- Grade: 67.74
- Grade Unit: g/t
- Intercept: 4.5 m
- From: 112 m
- To: 116.5 m
- Hole Depth: 222 m

#### Classification

- Deposit Type: epithermal
- Program: mixed
- Sample Type: drill
- Mining Method: underground

#### Location

- Easting: 607367
- Northing: 5270644
- CRS: UTM
- Elevation: 212.9 m
- Azimuth: 90 °
- Dip: -50 °
- Loc. Confidence: high

#### QA/QC

- Laboratory: ALS Minerals
- QA/QC Disclosed: Yes
- Lab Certified: Yes
- QP Signed: Yes
- QA/QC Methods: blanks, duplicates, standards

#### Review

- Needs Review: No
- Interp. Status: scored
- Historical: No

#### Dates

- Event date: 2026-05-11T00:00:00.000Z

Reasoning: This intercept of 4.5m at 67.74 g/t silver is a weak to moderate grade for an epithermal silver deposit, falling above the weak threshold but below the moderate threshold. True width is not determined.

- Positive factor: qaqc\_disclosed

- Positive factor: qp\_signed

- Negative factor: apparent\_width\_only

Evidence · table

> 67.74

Context: 4.50

#### Rejected tags

**Apparent Width Only** — Rejected; excluded from scoring

Polarity: negative

Definition: Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.

Reason: The document explicitly states that the true width of the mineralized intervals has not yet been determined.

Evidence · text

> Reported intervals are drilling length, and the true width of the mineralized intervals has not yet been determined

### LM-26-316

[Link to this fact](https://atlas-staging.minestarters.com/news/brixton-metals-drills-13-0m-of-594-g-t-silver-including-0-5m-of-7-900-g-t-silver--08bd3a14-a787-4b34-b0bd-ba471da234a5#fact-drill-facts-18)

S6-S · silver

#### Identity

- Hole ID: LM-26-316
- Project: S6-S
- Commodity: silver
- Region: canada\_on
- Reported Region: Ontario, Canada
- Ticker: BBB

#### Geometry

- Grade: 165
- Grade Unit: g/t
- Intercept: 0.5 m
- From: 115.5 m
- To: 116 m
- Hole Depth: 222 m

#### Classification

- Deposit Type: epithermal
- Program: mixed
- Sample Type: drill
- Group ID: LM-26-316:115.5-116.0
- Mining Method: underground

#### Location

- Easting: 607367
- Northing: 5270644
- CRS: UTM
- Elevation: 212.9 m
- Azimuth: 90 °
- Dip: -50 °
- Loc. Confidence: high

#### QA/QC

- Laboratory: ALS Minerals
- QA/QC Disclosed: Yes
- Lab Certified: Yes
- QP Signed: Yes
- QA/QC Methods: blanks, duplicates, standards

#### Review

- Needs Review: No
- Interp. Status: scored
- Historical: No

#### Dates

- Event date: 2026-05-11T00:00:00.000Z

Reasoning: This sub-interval of 0.5m at 165 g/t silver is a moderate grade for an epithermal silver deposit, falling above the moderate threshold but below the strong threshold. True width is not determined.

- Positive factor: moderate\_grade\_intercept

- Positive factor: qaqc\_disclosed

- Positive factor: qp\_signed

- Negative factor: apparent\_width\_only

Evidence · table

> 165.00

Context: 0.50

#### Rejected tags

**Apparent Width Only** — Rejected; excluded from scoring

Polarity: negative

Definition: Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.

Reason: The document explicitly states that the true width of the mineralized intervals has not yet been determined.

Evidence · text

> Reported intervals are drilling length, and the true width of the mineralized intervals has not yet been determined

### LM-26-317

[Link to this fact](https://atlas-staging.minestarters.com/news/brixton-metals-drills-13-0m-of-594-g-t-silver-including-0-5m-of-7-900-g-t-silver--08bd3a14-a787-4b34-b0bd-ba471da234a5#fact-drill-facts-19)

S6-S · silver

#### Identity

- Hole ID: LM-26-317
- Project: S6-S
- Commodity: silver
- Region: canada\_on
- Reported Region: Ontario, Canada
- Ticker: BBB

#### Geometry

- Grade: 35.84
- Grade Unit: g/t
- Intercept: 1.5 m
- From: 144.5 m
- To: 146 m
- Hole Depth: 240 m

#### Classification

- Deposit Type: epithermal
- Program: mixed
- Sample Type: drill
- Mining Method: underground

#### Location

- Easting: 607367
- Northing: 5270644
- CRS: UTM
- Elevation: 212.9 m
- Azimuth: 90 °
- Dip: -60 °
- Loc. Confidence: high

#### QA/QC

- Laboratory: ALS Minerals
- QA/QC Disclosed: Yes
- Lab Certified: Yes
- QP Signed: Yes
- QA/QC Methods: blanks, duplicates, standards

#### Review

- Needs Review: No
- Interp. Status: scored
- Historical: No

#### Dates

- Event date: 2026-05-11T00:00:00.000Z

Reasoning: This intercept of 1.5m at 35.84 g/t silver is a weak to moderate grade for an epithermal silver deposit, falling above the weak threshold but below the moderate threshold. True width is not determined.

- Positive factor: qaqc\_disclosed

- Positive factor: qp\_signed

- Negative factor: apparent\_width\_only

Evidence · table

> 35.84

Context: 1.50

#### Rejected tags

**Apparent Width Only** — Rejected; excluded from scoring

Polarity: negative

Definition: Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.

Reason: The document explicitly states that the true width of the mineralized intervals has not yet been determined.

Evidence · text

> Reported intervals are drilling length, and the true width of the mineralized intervals has not yet been determined

### LM-26-317

[Link to this fact](https://atlas-staging.minestarters.com/news/brixton-metals-drills-13-0m-of-594-g-t-silver-including-0-5m-of-7-900-g-t-silver--08bd3a14-a787-4b34-b0bd-ba471da234a5#fact-drill-facts-20)

S6-S · silver

#### Identity

- Hole ID: LM-26-317
- Project: S6-S
- Commodity: silver
- Region: canada\_on
- Reported Region: Ontario, Canada
- Ticker: BBB

#### Geometry

- Grade: 110
- Grade Unit: g/t
- Intercept: 0.4 m
- From: 145.6 m
- To: 146 m
- Hole Depth: 240 m

#### Classification

- Deposit Type: epithermal
- Program: mixed
- Sample Type: drill
- Group ID: LM-26-317:145.6-146.0
- Mining Method: underground

#### Location

- Easting: 607367
- Northing: 5270644
- CRS: UTM
- Elevation: 212.9 m
- Azimuth: 90 °
- Dip: -60 °
- Loc. Confidence: high

#### QA/QC

- Laboratory: ALS Minerals
- QA/QC Disclosed: Yes
- Lab Certified: Yes
- QP Signed: Yes
- QA/QC Methods: blanks, duplicates, standards

#### Review

- Needs Review: No
- Interp. Status: scored
- Historical: No

#### Dates

- Event date: 2026-05-11T00:00:00.000Z

Reasoning: This intercept of 0.4m at 110 g/t silver is a moderate grade for an epithermal silver deposit, falling above the moderate threshold but below the strong threshold. True width is not determined.

- Positive factor: moderate\_grade\_intercept

- Positive factor: qaqc\_disclosed

- Positive factor: qp\_signed

- Negative factor: apparent\_width\_only

Evidence · table

> 110.00

Context: 0.40

#### Rejected tags

**Apparent Width Only** — Rejected; excluded from scoring

Polarity: negative

Definition: Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.

Reason: The document explicitly states that the true width of the mineralized intervals has not yet been determined.

Evidence · text

> Reported intervals are drilling length, and the true width of the mineralized intervals has not yet been determined

### LM-26-320

[Link to this fact](https://atlas-staging.minestarters.com/news/brixton-metals-drills-13-0m-of-594-g-t-silver-including-0-5m-of-7-900-g-t-silver--08bd3a14-a787-4b34-b0bd-ba471da234a5#fact-drill-facts-21)

S6-S · silver

#### Identity

- Hole ID: LM-26-320
- Project: S6-S
- Commodity: silver
- Region: canada\_on
- Reported Region: Ontario, Canada
- Ticker: BBB

#### Geometry

- Grade: 5.3
- Grade Unit: g/t
- Intercept: 16 m
- From: 113 m
- To: 129 m
- Hole Depth: 129 m

#### Classification

- Deposit Type: epithermal
- Program: mixed
- Sample Type: drill
- Mining Method: underground

#### Location

- Easting: 607385
- Northing: 5270790
- CRS: UTM
- Elevation: 215.4 m
- Azimuth: 180 °
- Dip: -45 °
- Loc. Confidence: high

#### QA/QC

- Laboratory: ALS Minerals
- QA/QC Disclosed: Yes
- Lab Certified: Yes
- QP Signed: Yes
- QA/QC Methods: blanks, duplicates, standards

#### Review

- Needs Review: No
- Interp. Status: scored
- Historical: No

#### Dates

- Event date: 2026-05-11T00:00:00.000Z

Reasoning: This intercept of 16.0m at 5.3 g/t silver is below the weak threshold \(30 g/t\) for an epithermal silver deposit, indicating low grade. True width is not determined.

- Positive factor: qaqc\_disclosed

- Positive factor: qp\_signed

- Negative factor: apparent\_width\_only

Evidence · table

> 5.30

Context: 16.00

#### Rejected tags

**Apparent Width Only** — Rejected; excluded from scoring

Polarity: negative

Definition: Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.

Reason: The document explicitly states that the true width of the mineralized intervals has not yet been determined.

Evidence · text

> Reported intervals are drilling length, and the true width of the mineralized intervals has not yet been determined

### LM-26-321

[Link to this fact](https://atlas-staging.minestarters.com/news/brixton-metals-drills-13-0m-of-594-g-t-silver-including-0-5m-of-7-900-g-t-silver--08bd3a14-a787-4b34-b0bd-ba471da234a5#fact-drill-facts-22)

S6-S · silver

#### Identity

- Hole ID: LM-26-321
- Project: S6-S
- Commodity: silver
- Region: canada\_on
- Reported Region: Ontario, Canada
- Ticker: BBB

#### Geometry

- Grade: 21.33
- Grade Unit: g/t
- Intercept: 19.8 m
- From: 104 m
- To: 123.8 m
- Hole Depth: 186 m

#### Classification

- Deposit Type: epithermal
- Program: mixed
- Sample Type: drill
- Mining Method: underground

#### Location

- Easting: 607385
- Northing: 5270790
- CRS: UTM
- Elevation: 215.4 m
- Azimuth: 90 °
- Dip: -60 °
- Loc. Confidence: high

#### QA/QC

- Laboratory: ALS Minerals
- QA/QC Disclosed: Yes
- Lab Certified: Yes
- QP Signed: Yes
- QA/QC Methods: blanks, duplicates, standards

#### Review

- Needs Review: No
- Interp. Status: scored
- Historical: No

#### Dates

- Event date: 2026-05-11T00:00:00.000Z

Reasoning: This intercept of 19.8m at 21.33 g/t silver is below the weak threshold \(30 g/t\) for an epithermal silver deposit, indicating low grade. True width is not determined.

- Positive factor: qaqc\_disclosed

- Positive factor: qp\_signed

- Negative factor: apparent\_width\_only

Evidence · table

> 21.33

Context: 19.80

#### Rejected tags

**Apparent Width Only** — Rejected; excluded from scoring

Polarity: negative

Definition: Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.

Reason: The document explicitly states that the true width of the mineralized intervals has not yet been determined.

Evidence · text

> Reported intervals are drilling length, and the true width of the mineralized intervals has not yet been determined

### LM-26-321

[Link to this fact](https://atlas-staging.minestarters.com/news/brixton-metals-drills-13-0m-of-594-g-t-silver-including-0-5m-of-7-900-g-t-silver--08bd3a14-a787-4b34-b0bd-ba471da234a5#fact-drill-facts-23)

S6-S · silver

#### Identity

- Hole ID: LM-26-321
- Project: S6-S
- Commodity: silver
- Region: canada\_on
- Reported Region: Ontario, Canada
- Ticker: BBB

#### Geometry

- Grade: 134
- Grade Unit: g/t
- Intercept: 2 m
- From: 113 m
- To: 115 m
- Hole Depth: 186 m

#### Classification

- Deposit Type: epithermal
- Program: mixed
- Sample Type: drill
- Group ID: LM-26-321:113.0-115.0
- Mining Method: underground

#### Location

- Easting: 607385
- Northing: 5270790
- CRS: UTM
- Elevation: 215.4 m
- Azimuth: 90 °
- Dip: -60 °
- Loc. Confidence: high

#### QA/QC

- Laboratory: ALS Minerals
- QA/QC Disclosed: Yes
- Lab Certified: Yes
- QP Signed: Yes
- QA/QC Methods: blanks, duplicates, standards

#### Review

- Needs Review: No
- Interp. Status: scored
- Historical: No

#### Dates

- Event date: 2026-05-11T00:00:00.000Z

Reasoning: This sub-interval of 2.0m at 134 g/t silver is a moderate grade for an epithermal silver deposit, falling above the moderate threshold but below the strong threshold. True width is not determined.

- Positive factor: moderate\_grade\_intercept

- Positive factor: qaqc\_disclosed

- Positive factor: qp\_signed

- Negative factor: apparent\_width\_only

Evidence · table

> 134.00

Context: 2.00

#### Rejected tags

**Apparent Width Only** — Rejected; excluded from scoring

Polarity: negative

Definition: Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.

Reason: The document explicitly states that the true width of the mineralized intervals has not yet been determined.

Evidence · text

> Reported intervals are drilling length, and the true width of the mineralized intervals has not yet been determined

### LM-26-322

[Link to this fact](https://atlas-staging.minestarters.com/news/brixton-metals-drills-13-0m-of-594-g-t-silver-including-0-5m-of-7-900-g-t-silver--08bd3a14-a787-4b34-b0bd-ba471da234a5#fact-drill-facts-24)

S6-S · silver

#### Identity

- Hole ID: LM-26-322
- Project: S6-S
- Commodity: silver
- Region: canada\_on
- Reported Region: Ontario, Canada
- Ticker: BBB

#### Geometry

- Grade: 10.34
- Grade Unit: g/t
- Intercept: 30.8 m
- From: 180.2 m
- To: 211 m
- Hole Depth: 213 m

#### Classification

- Deposit Type: epithermal
- Program: mixed
- Sample Type: drill
- Mining Method: underground

#### Location

- Easting: 607385
- Northing: 5270790
- CRS: UTM
- Elevation: 215.4 m
- Azimuth: 90 °
- Dip: -70 °
- Loc. Confidence: high

#### QA/QC

- Laboratory: ALS Minerals
- QA/QC Disclosed: Yes
- Lab Certified: Yes
- QP Signed: Yes
- QA/QC Methods: blanks, duplicates, standards

#### Review

- Needs Review: No
- Interp. Status: scored
- Historical: No

#### Dates

- Event date: 2026-05-11T00:00:00.000Z

Reasoning: This intercept of 30.8m at 10.34 g/t silver is below the weak threshold \(30 g/t\) for an epithermal silver deposit, indicating low grade. True width is not determined.

- Positive factor: qaqc\_disclosed

- Positive factor: qp\_signed

- Negative factor: apparent\_width\_only

Evidence · table

> 10.34

Context: 30.80

#### Rejected tags

**Apparent Width Only** — Rejected; excluded from scoring

Polarity: negative

Definition: Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.

Reason: The document explicitly states that the true width of the mineralized intervals has not yet been determined.

Evidence · text

> Reported intervals are drilling length, and the true width of the mineralized intervals has not yet been determined

### LM-26-328

[Link to this fact](https://atlas-staging.minestarters.com/news/brixton-metals-drills-13-0m-of-594-g-t-silver-including-0-5m-of-7-900-g-t-silver--08bd3a14-a787-4b34-b0bd-ba471da234a5#fact-drill-facts-25)

S6-S · silver

#### Identity

- Hole ID: LM-26-328
- Project: S6-S
- Commodity: silver
- Region: canada\_on
- Reported Region: Ontario, Canada
- Ticker: BBB

#### Geometry

- Grade: 58.2
- Grade Unit: g/t
- Intercept: 5 m
- From: 147 m
- To: 152 m
- Hole Depth: 249 m

#### Classification

- Deposit Type: epithermal
- Program: mixed
- Sample Type: drill
- Mining Method: underground

#### Location

- Easting: 607385
- Northing: 5270810
- CRS: UTM
- Elevation: 215.9 m
- Azimuth: 90 °
- Dip: -50 °
- Loc. Confidence: high

#### QA/QC

- Laboratory: ALS Minerals
- QA/QC Disclosed: Yes
- Lab Certified: Yes
- QP Signed: Yes
- QA/QC Methods: blanks, duplicates, standards

#### Review

- Needs Review: No
- Interp. Status: scored
- Historical: No

#### Dates

- Event date: 2026-05-11T00:00:00.000Z

Reasoning: This intercept of 5.0m at 58.2 g/t silver is a weak to moderate grade for an epithermal silver deposit, falling above the weak threshold but below the moderate threshold. True width is not determined.

- Positive factor: qaqc\_disclosed

- Positive factor: qp\_signed

- Negative factor: apparent\_width\_only

Evidence · table

> 58.20

Context: 5.00

#### Rejected tags

**Apparent Width Only** — Rejected; excluded from scoring

Polarity: negative

Definition: Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.

Reason: The document explicitly states that the true width of the mineralized intervals has not yet been determined.

Evidence · text

> Reported intervals are drilling length, and the true width of the mineralized intervals has not yet been determined

### LM-26-328

[Link to this fact](https://atlas-staging.minestarters.com/news/brixton-metals-drills-13-0m-of-594-g-t-silver-including-0-5m-of-7-900-g-t-silver--08bd3a14-a787-4b34-b0bd-ba471da234a5#fact-drill-facts-26)

S6-S · silver

#### Identity

- Hole ID: LM-26-328
- Project: S6-S
- Commodity: silver
- Region: canada\_on
- Reported Region: Ontario, Canada
- Ticker: BBB

#### Geometry

- Grade: 132.76
- Grade Unit: g/t
- Intercept: 2 m
- From: 147 m
- To: 149 m
- Hole Depth: 249 m

#### Classification

- Deposit Type: epithermal
- Program: mixed
- Sample Type: drill
- Group ID: LM-26-328:147.0-149.0
- Mining Method: underground

#### Location

- Easting: 607385
- Northing: 5270810
- CRS: UTM
- Elevation: 215.9 m
- Azimuth: 90 °
- Dip: -50 °
- Loc. Confidence: high

#### QA/QC

- Laboratory: ALS Minerals
- QA/QC Disclosed: Yes
- Lab Certified: Yes
- QP Signed: Yes
- QA/QC Methods: blanks, duplicates, standards

#### Review

- Needs Review: No
- Interp. Status: scored
- Historical: No

#### Dates

- Event date: 2026-05-11T00:00:00.000Z

Reasoning: This sub-interval of 2.0m at 132.76 g/t silver is a moderate grade for an epithermal silver deposit, falling above the moderate threshold but below the strong threshold. True width is not determined.

- Positive factor: moderate\_grade\_intercept

- Positive factor: qaqc\_disclosed

- Positive factor: qp\_signed

- Negative factor: apparent\_width\_only

Evidence · table

> 132.76

Context: 2.00

#### Rejected tags

**Apparent Width Only** — Rejected; excluded from scoring

Polarity: negative

Definition: Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.

Reason: The document explicitly states that the true width of the mineralized intervals has not yet been determined.

Evidence · text

> Reported intervals are drilling length, and the true width of the mineralized intervals has not yet been determined

### LM-26-331

[Link to this fact](https://atlas-staging.minestarters.com/news/brixton-metals-drills-13-0m-of-594-g-t-silver-including-0-5m-of-7-900-g-t-silver--08bd3a14-a787-4b34-b0bd-ba471da234a5#fact-drill-facts-27)

S6-S · silver

#### Identity

- Hole ID: LM-26-331
- Project: S6-S
- Commodity: silver
- Region: canada\_on
- Reported Region: Ontario, Canada
- Ticker: BBB

#### Geometry

- Grade: 8.09
- Grade Unit: g/t
- Intercept: 27 m
- From: 156 m
- To: 183 m
- Hole Depth: 204 m

#### Classification

- Deposit Type: epithermal
- Program: mixed
- Sample Type: drill
- Mining Method: underground

#### Location

- Easting: 607385
- Northing: 5270770
- CRS: UTM
- Elevation: 214.9 m
- Azimuth: 90 °
- Dip: -50 °
- Loc. Confidence: high

#### QA/QC

- Laboratory: ALS Minerals
- QA/QC Disclosed: Yes
- Lab Certified: Yes
- QP Signed: Yes
- QA/QC Methods: blanks, duplicates, standards

#### Review

- Needs Review: No
- Interp. Status: scored
- Historical: No

#### Dates

- Event date: 2026-05-11T00:00:00.000Z

Reasoning: This intercept of 27.0m at 8.09 g/t silver is below the weak threshold \(30 g/t\) for an epithermal silver deposit, indicating low grade. True width is not determined.

- Positive factor: qaqc\_disclosed

- Positive factor: qp\_signed

- Negative factor: apparent\_width\_only

Evidence · table

> 8.09

Context: 27.00

#### Rejected tags

**Apparent Width Only** — Rejected; excluded from scoring

Polarity: negative

Definition: Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.

Reason: The document explicitly states that the true width of the mineralized intervals has not yet been determined.

Evidence · text

> Reported intervals are drilling length, and the true width of the mineralized intervals has not yet been determined

### LM-26-331

[Link to this fact](https://atlas-staging.minestarters.com/news/brixton-metals-drills-13-0m-of-594-g-t-silver-including-0-5m-of-7-900-g-t-silver--08bd3a14-a787-4b34-b0bd-ba471da234a5#fact-drill-facts-28)

S6-S · silver

#### Identity

- Hole ID: LM-26-331
- Project: S6-S
- Commodity: silver
- Region: canada\_on
- Reported Region: Ontario, Canada
- Ticker: BBB

#### Geometry

- Grade: 23.64
- Grade Unit: g/t
- Intercept: 5 m
- From: 178 m
- To: 183 m
- Hole Depth: 204 m

#### Classification

- Deposit Type: epithermal
- Program: mixed
- Sample Type: drill
- Group ID: LM-26-331:178.0-183.0
- Mining Method: underground

#### Location

- Easting: 607385
- Northing: 5270770
- CRS: UTM
- Elevation: 214.9 m
- Azimuth: 90 °
- Dip: -50 °
- Loc. Confidence: high

#### QA/QC

- Laboratory: ALS Minerals
- QA/QC Disclosed: Yes
- Lab Certified: Yes
- QP Signed: Yes
- QA/QC Methods: blanks, duplicates, standards

#### Review

- Needs Review: No
- Interp. Status: scored
- Historical: No

#### Dates

- Event date: 2026-05-11T00:00:00.000Z

Reasoning: This sub-interval of 5.0m at 23.64 g/t silver is below the weak threshold \(30 g/t\) for an epithermal silver deposit, indicating low grade. True width is not determined.

- Positive factor: qaqc\_disclosed

- Positive factor: qp\_signed

- Negative factor: apparent\_width\_only

Evidence · table

> 23.64

Context: 5.00

#### Rejected tags

**Apparent Width Only** — Rejected; excluded from scoring

Polarity: negative

Definition: Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.

Reason: The document explicitly states that the true width of the mineralized intervals has not yet been determined.

Evidence · text

> Reported intervals are drilling length, and the true width of the mineralized intervals has not yet been determined

### LM-26-333

[Link to this fact](https://atlas-staging.minestarters.com/news/brixton-metals-drills-13-0m-of-594-g-t-silver-including-0-5m-of-7-900-g-t-silver--08bd3a14-a787-4b34-b0bd-ba471da234a5#fact-drill-facts-29)

S6-S · silver

#### Identity

- Hole ID: LM-26-333
- Project: S6-S
- Commodity: silver
- Region: canada\_on
- Reported Region: Ontario, Canada
- Ticker: BBB

#### Geometry

- Grade: 7.82
- Grade Unit: g/t
- Intercept: 12 m
- From: 98 m
- To: 110 m
- Hole Depth: 216 m

#### Classification

- Deposit Type: epithermal
- Program: mixed
- Sample Type: drill
- Mining Method: underground

#### Location

- Easting: 607385
- Northing: 5270770
- CRS: UTM
- Elevation: 214.9 m
- Azimuth: 95 °
- Dip: -55 °
- Loc. Confidence: high

#### QA/QC

- Laboratory: ALS Minerals
- QA/QC Disclosed: Yes
- Lab Certified: Yes
- QP Signed: Yes
- QA/QC Methods: blanks, duplicates, standards

#### Review

- Needs Review: No
- Interp. Status: scored
- Historical: No

#### Dates

- Event date: 2026-05-11T00:00:00.000Z

Reasoning: This intercept of 12.0m at 7.82 g/t silver is below the weak threshold \(30 g/t\) for an epithermal silver deposit, indicating low grade. True width is not determined.

- Positive factor: qaqc\_disclosed

- Positive factor: qp\_signed

- Negative factor: apparent\_width\_only

Evidence · table

> 7.82

Context: 12.00

#### Rejected tags

**Apparent Width Only** — Rejected; excluded from scoring

Polarity: negative

Definition: Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.

Reason: The document explicitly states that the true width of the mineralized intervals has not yet been determined.

Evidence · text

> Reported intervals are drilling length, and the true width of the mineralized intervals has not yet been determined

### LM-26-333

[Link to this fact](https://atlas-staging.minestarters.com/news/brixton-metals-drills-13-0m-of-594-g-t-silver-including-0-5m-of-7-900-g-t-silver--08bd3a14-a787-4b34-b0bd-ba471da234a5#fact-drill-facts-30)

S6-S · silver

#### Identity

- Hole ID: LM-26-333
- Project: S6-S
- Commodity: silver
- Region: canada\_on
- Reported Region: Ontario, Canada
- Ticker: BBB

#### Geometry

- Grade: 3.46
- Grade Unit: g/t
- Intercept: 13.5 m
- From: 124 m
- To: 137.5 m
- Hole Depth: 216 m

#### Classification

- Deposit Type: epithermal
- Program: mixed
- Sample Type: drill
- Group ID: LM-26-333:124.0-137.5
- Mining Method: underground

#### Location

- Easting: 607385
- Northing: 5270770
- CRS: UTM
- Elevation: 214.9 m
- Azimuth: 95 °
- Dip: -55 °
- Loc. Confidence: high

#### QA/QC

- Laboratory: ALS Minerals
- QA/QC Disclosed: Yes
- Lab Certified: Yes
- QP Signed: Yes
- QA/QC Methods: blanks, duplicates, standards

#### Review

- Needs Review: No
- Interp. Status: scored
- Historical: No

#### Dates

- Event date: 2026-05-11T00:00:00.000Z

Reasoning: This intercept of 13.5m at 3.46 g/t silver is below the weak threshold \(30 g/t\) for an epithermal silver deposit, indicating low grade. True width is not determined.

- Positive factor: qaqc\_disclosed

- Positive factor: qp\_signed

- Negative factor: apparent\_width\_only

Evidence · table

> 3.46

Context: 13.50

#### Rejected tags

**Apparent Width Only** — Rejected; excluded from scoring

Polarity: negative

Definition: Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.

Reason: The document explicitly states that the true width of the mineralized intervals has not yet been determined.

Evidence · text

> Reported intervals are drilling length, and the true width of the mineralized intervals has not yet been determined

### LM-26-334

[Link to this fact](https://atlas-staging.minestarters.com/news/brixton-metals-drills-13-0m-of-594-g-t-silver-including-0-5m-of-7-900-g-t-silver--08bd3a14-a787-4b34-b0bd-ba471da234a5#fact-drill-facts-31)

S6-S · silver

#### Identity

- Hole ID: LM-26-334
- Project: S6-S
- Commodity: silver
- Region: canada\_on
- Reported Region: Ontario, Canada
- Ticker: BBB

#### Geometry

- Grade: 15.87
- Grade Unit: g/t
- Intercept: 3.8 m
- From: 90 m
- To: 93.8 m
- Hole Depth: 96 m

#### Classification

- Deposit Type: epithermal
- Program: mixed
- Sample Type: drill
- Mining Method: underground

#### Location

- Easting: 607385
- Northing: 5270770
- CRS: UTM
- Elevation: 214.9 m
- Azimuth: 85 °
- Dip: -60 °
- Loc. Confidence: high

#### QA/QC

- Laboratory: ALS Minerals
- QA/QC Disclosed: Yes
- Lab Certified: Yes
- QP Signed: Yes
- QA/QC Methods: blanks, duplicates, standards

#### Review

- Needs Review: No
- Interp. Status: scored
- Historical: No

#### Dates

- Event date: 2026-05-11T00:00:00.000Z

Reasoning: This intercept of 3.8m at 15.87 g/t silver is below the weak threshold \(30 g/t\) for an epithermal silver deposit, indicating low grade. True width is not determined.

- Positive factor: qaqc\_disclosed

- Positive factor: qp\_signed

- Negative factor: apparent\_width\_only

Evidence · table

> 15.87

Context: 3.80

#### Rejected tags

**Apparent Width Only** — Rejected; excluded from scoring

Polarity: negative

Definition: Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.

Reason: The document explicitly states that the true width of the mineralized intervals has not yet been determined.

Evidence · text

> Reported intervals are drilling length, and the true width of the mineralized intervals has not yet been determined

### LM-26-336

[Link to this fact](https://atlas-staging.minestarters.com/news/brixton-metals-drills-13-0m-of-594-g-t-silver-including-0-5m-of-7-900-g-t-silver--08bd3a14-a787-4b34-b0bd-ba471da234a5#fact-drill-facts-32)

S6-S · silver

#### Identity

- Hole ID: LM-26-336
- Project: S6-S
- Commodity: silver
- Region: canada\_on
- Reported Region: Ontario, Canada
- Ticker: BBB

#### Geometry

- Grade: 6.85
- Grade Unit: g/t
- Intercept: 2.7 m
- From: 142 m
- To: 144.7 m
- Hole Depth: 219 m

#### Classification

- Deposit Type: epithermal
- Program: mixed
- Sample Type: drill
- Mining Method: underground

#### Location

- Easting: 607385
- Northing: 5270770
- CRS: UTM
- Elevation: 214.9 m
- Azimuth: 80 °
- Dip: -50 °
- Loc. Confidence: high

#### QA/QC

- Laboratory: ALS Minerals
- QA/QC Disclosed: Yes
- Lab Certified: Yes
- QP Signed: Yes
- QA/QC Methods: blanks, duplicates, standards

#### Review

- Needs Review: No
- Interp. Status: scored
- Historical: No

#### Dates

- Event date: 2026-05-11T00:00:00.000Z

Reasoning: This intercept of 2.7m at 6.85 g/t silver is below the weak threshold \(30 g/t\) for an epithermal silver deposit, indicating low grade. True width is not determined.

- Positive factor: qaqc\_disclosed

- Positive factor: qp\_signed

- Negative factor: apparent\_width\_only

Evidence · table

> 6.85

Context: 2.70

#### Rejected tags

**Apparent Width Only** — Rejected; excluded from scoring

Polarity: negative

Definition: Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.

Reason: The document explicitly states that the true width of the mineralized intervals has not yet been determined.

Evidence · text

> Reported intervals are drilling length, and the true width of the mineralized intervals has not yet been determined

### LM-26-336

[Link to this fact](https://atlas-staging.minestarters.com/news/brixton-metals-drills-13-0m-of-594-g-t-silver-including-0-5m-of-7-900-g-t-silver--08bd3a14-a787-4b34-b0bd-ba471da234a5#fact-drill-facts-33)

S6-S · silver

#### Identity

- Hole ID: LM-26-336
- Project: S6-S
- Commodity: silver
- Region: canada\_on
- Reported Region: Ontario, Canada
- Ticker: BBB

#### Geometry

- Grade: 6.91
- Grade Unit: g/t
- Intercept: 21.95 m
- From: 184.65 m
- To: 206.6 m
- Hole Depth: 219 m

#### Classification

- Deposit Type: epithermal
- Program: mixed
- Sample Type: drill
- Group ID: LM-26-336:184.65-206.6
- Mining Method: underground

#### Location

- Easting: 607385
- Northing: 5270770
- CRS: UTM
- Elevation: 214.9 m
- Azimuth: 80 °
- Dip: -50 °
- Loc. Confidence: high

#### QA/QC

- Laboratory: ALS Minerals
- QA/QC Disclosed: Yes
- Lab Certified: Yes
- QP Signed: Yes
- QA/QC Methods: blanks, duplicates, standards

#### Review

- Needs Review: No
- Interp. Status: scored
- Historical: No

#### Dates

- Event date: 2026-05-11T00:00:00.000Z

Reasoning: This intercept of 21.95m at 6.91 g/t silver is below the weak threshold \(30 g/t\) for an epithermal silver deposit, indicating low grade. True width is not determined.

- Positive factor: qaqc\_disclosed

- Positive factor: qp\_signed

- Negative factor: apparent\_width\_only

Evidence · table

> 6.91

Context: 21.95

#### Rejected tags

**Apparent Width Only** — Rejected; excluded from scoring

Polarity: negative

Definition: Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.

Reason: The document explicitly states that the true width of the mineralized intervals has not yet been determined.

Evidence · text

> Reported intervals are drilling length, and the true width of the mineralized intervals has not yet been determined

## How Atlas produces this analysis

Minestarters Atlas uses automated extraction to summarize mining announcements, identify reported measurements, and classify supporting evidence. Sentiment reflects the extracted narrative and classification rules; it is an interpretation, not a reported measurement. Evidence quotes and context are provided where available. Missing data, low-confidence results, and review flags indicate limitations. Check the original publisher announcement before relying on an interpretation.