BMR: Annual Report to shareholders
Original announcement by asx on
- Company
- Ballymore Resources Limited
- Ticker
- BMR
- Exchange
- ASX
- Region
- Queensland
- Primary commodity
- Gold
- Secondary commodities
- Silver, Lead, Zinc, Copper, Indium
- Document categories
- Drill results, Capital raise, Other
- Extracted
- 2026-09-29 15:08:35 UTC
Analysis by Minestarters Atlas
Atlas analysis published:
Minestarters Atlas analysis
Summary
Ballymore Resources Limited's annual report for FY2026 details significant exploration success, including high-grade gold, silver, and copper results at the Dittmer Project, which is advancing towards a maiden Mineral Resource Estimate. The company also announced a new high-grade silver-lead-zinc-indium discovery at Torpy's within the Ruddygore Project, with several bonanza intercepts. These advancements are supported by successful capital raises and government grants, positioning the company for future development, although the auditor noted a material uncertainty regarding its going concern status.
Reasoning: The annual report highlights significant exploration success, particularly high-grade drill results at Dittmer and a new polymetallic discovery at Torpy's, alongside strategic progress towards resource definition and development. This is supported by successful capital raises and government funding, despite a material uncertainty regarding the company's going concern status.
Positive factors
- High-grade drill results at Dittmer and Torpy's
- New high-grade polymetallic discovery at Torpy's
- Significant progress towards maiden Mineral Resource Estimate at Dittmer
- Successful capital raises strengthening funding position
- Government funding secured for exploration programs
- Expansion of mineralized corridors and regional target generation
Negative factors
- Material uncertainty regarding going concern status
Low confidence — this extraction should be reviewed alongside the original source.
Facts used in scoring: 91
Classification and evidence
QP/CP Signedpositive · Story-specific tag
Qualified Person (QP) or Competent Person (CP) named and signed off — a member of a recognized professional association (e.g., AusIMM, SME, AIG, P.Geo) with relevant experience.
Why it applies: The report states that Mr David A-Izzeddin, a Member of The Australian Institute of Geoscientists, serves as Competent Person for Ballymore Resources and reviewed the Exploration Results.
Evidence · text
“Mr David A-Izzeddin... serves as Competent Person for Ballymore Resources. Mr A-Izzeddin has sufficient experience which is relevant to the style of mineralisation and type of deposit under consideration and to the activity which he is undertaking to qualify as a Competent Person as defined in the 2012 Edition of the ‘Australasian Code for Reporting of Exploration Results, Mineral Resources and Ore Reserves’.”
JORC Compliantpositive · Story-specific tag
Resource estimate prepared in compliance with JORC Code (Australia) — high reporting standard.
Why it applies: The company confirms that Exploration Results were estimated, reported, and reviewed in accordance with the JORC Code 2012 edition.
Evidence · text
“Ballymore confirms that Exploration Results and Exploration Targets used in this document were estimated, reported and reviewed in accordance with the guidelines of the Australian Code for the Reporting of Exploration Results, Mineral Resources and Ore Reserves (The JORC Code) 2012 edition.”
Bonanza Interceptpositive
Exceptionally high-grade zone, well above the deposit-type norm.
Why it applies: Several intercepts at Dittmer (e.g., 0.60m at 43.09 g/t Au, 0.50m at 41.28 g/t Au, 0.35m at 76.39 g/t Au) and Torpy's (e.g., 7m at 650.7 g/t Ag, 10m at 483.2 g/t Ag) show exceptionally high grades well above deposit-type norms.
Evidence · text
“0.60m at 43.09 g/t Au, 13.6 g/t Ag and 0.57% Cu”
Apparent Width Onlynegative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Why it applies: All reported drill intercepts are given as downhole lengths without explicit true width or drill orientation information.
Evidence · text
“15.0m at 2.13 g/t Au and 0.8 g/t Ag”
Step-Out Extensionpositive
Mineralization extended beyond the previously known limit.
Why it applies: Drilling at Little Torpy’s, 600m south of the historic Torpy’s workings, demonstrated that mineralisation extends beyond the historic workings.
Evidence · text
“Furthermore, the first drilling at Little Torpy’s, located 600m south of the historic Torpy’s workings, also intersected a broad zone of galena-sphalerite mineralisation, demonstrating that the system was not confined to the immediate mine area.”
Maiden Resourceneutral · Story-specific tag
First formal MRE for the project — establishes baseline but typically exploration-stage with high Inferred component.
Why it applies: The company is progressing towards defining a maiden Mineral Resource Estimate at Dittmer.
Evidence · text
“ultimately our objective of defining a maiden Mineral Resource Estimate.”
Going Concern Risknegative · Story-specific tag
No canonical definition is currently available.
Why it applies: The auditor's report highlights a material uncertainty that may cast significant doubt about the entity’s ability to continue as a going concern.
Evidence · text
“We draw attention to Note 1 in the financial report which describes the events and/or conditions which give rise to the existence of a material uncertainty that may cast significant doubt about the entity’s ability to continue as a going concern”
Extracted facts
Stored fact records: 91. Some facts used in scoring do not have a stored record.
Drill Results (91)
DTDD058Dittmer · goldGrade: 2.13Grade Unit: g/tIntercept: 15 mView all detailsHide details
Identity
- Hole ID
- DTDD058
- Project
- Dittmer
- Commodity
- gold
- Region
- australia_qld
- Reported Region
- australia_qld
- Ticker
- BMR
Geometry
- Grade
- 2.13
- Grade Unit
- g/t
- Intercept
- 15 m
Classification
- Deposit Type
- orogenic
- Program
- resource
- Sample Type
- drill
- Mining Method
- underground
QA/QC
- QP Signed
- Yes
Deleterious
- Deleterious Flag
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-29T00:00:00.000Z
Reasoning: This intercept of 15.0m at 2.13 g/t Au is a strong result for an underground gold project, confirming the continuity of the Duffer Lode and supporting the geological model.
Positive factors
- High-grade gold intercept
- Significant intercept length
- Supports geological model and continuity
Negative factors
- Apparent width only
Evidence · text
“15.0m at 2.13 g/t Au and 0.8 g/t Ag”
Tags used in scoring
No QA/QC Disclosurenegative
Release does not disclose QA/QC — lab certification, CP/QP sign-off and assay protocols cannot be checked from this document.
Why it applies: qaqc_disclosed is not true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
DTDD058Dittmer · silverGrade: 0.8Grade Unit: g/tIntercept: 15 mView all detailsHide details
Identity
- Hole ID
- DTDD058
- Project
- Dittmer
- Commodity
- silver
- Region
- australia_qld
- Reported Region
- australia_qld
- Ticker
- BMR
Geometry
- Grade
- 0.8
- Grade Unit
- g/t
- Intercept
- 15 m
Classification
- Deposit Type
- orogenic
- Program
- resource
- Sample Type
- drill
- Mining Method
- underground
QA/QC
- QP Signed
- Yes
Deleterious
- Deleterious Flag
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-29T00:00:00.000Z
Reasoning: The silver grade of 0.8 g/t over 15.0m is low but indicates the polymetallic nature of the mineralization at Dittmer.
Positive factors
- Supports polymetallic nature of mineralization
Negative factors
- Low silver grade
- Apparent width only
Evidence · text
“15.0m at 2.13 g/t Au and 0.8 g/t Ag”
Tags used in scoring
No QA/QC Disclosurenegative
Release does not disclose QA/QC — lab certification, CP/QP sign-off and assay protocols cannot be checked from this document.
Why it applies: qaqc_disclosed is not true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
DTDD058Dittmer · goldGrade: 13.25Grade Unit: g/tIntercept: 2.1 mView all detailsHide details
Identity
- Hole ID
- DTDD058
- Project
- Dittmer
- Commodity
- gold
- Region
- australia_qld
- Reported Region
- australia_qld
- Ticker
- BMR
Geometry
- Grade
- 13.25
- Grade Unit
- g/t
- Intercept
- 2.1 m
Classification
- Deposit Type
- orogenic
- Program
- resource
- Sample Type
- drill
- Mining Method
- underground
QA/QC
- QP Signed
- Yes
Deleterious
- Deleterious Flag
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-29T00:00:00.000Z
Reasoning: This sub-interval of 2.10m at 13.25 g/t Au is a very strong result, indicating high-grade shoots within the broader mineralized zone at Dittmer.
Positive factors
- High-grade gold sub-interval
- Confirms high-grade shoots within broader zone
Negative factors
- Apparent width only
Evidence · text
“2.10m at 13.25 g/t Au and 4.1 g/t Ag”
Tags used in scoring
No QA/QC Disclosurenegative
Release does not disclose QA/QC — lab certification, CP/QP sign-off and assay protocols cannot be checked from this document.
Why it applies: qaqc_disclosed is not true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
DTDD058Dittmer · silverGrade: 4.1Grade Unit: g/tIntercept: 2.1 mView all detailsHide details
Identity
- Hole ID
- DTDD058
- Project
- Dittmer
- Commodity
- silver
- Region
- australia_qld
- Reported Region
- australia_qld
- Ticker
- BMR
Geometry
- Grade
- 4.1
- Grade Unit
- g/t
- Intercept
- 2.1 m
Classification
- Deposit Type
- orogenic
- Program
- resource
- Sample Type
- drill
- Mining Method
- underground
QA/QC
- QP Signed
- Yes
Deleterious
- Deleterious Flag
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-29T00:00:00.000Z
Reasoning: The silver grade of 4.1 g/t over 2.10m is low but contributes to the polymetallic nature of the high-grade sub-interval.
Positive factors
- Supports polymetallic nature of mineralization
Negative factors
- Low silver grade
- Apparent width only
Evidence · text
“2.10m at 13.25 g/t Au and 4.1 g/t Ag”
Tags used in scoring
No QA/QC Disclosurenegative
Release does not disclose QA/QC — lab certification, CP/QP sign-off and assay protocols cannot be checked from this document.
Why it applies: qaqc_disclosed is not true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
DTDD058Dittmer · goldGrade: 43.09Grade Unit: g/tIntercept: 0.6 mView all detailsHide details
Identity
- Hole ID
- DTDD058
- Project
- Dittmer
- Commodity
- gold
- Region
- australia_qld
- Reported Region
- australia_qld
- Ticker
- BMR
Geometry
- Grade
- 43.09
- Grade Unit
- g/t
- Intercept
- 0.6 m
Classification
- Deposit Type
- orogenic
- Program
- resource
- Sample Type
- drill
- Mining Method
- underground
QA/QC
- QP Signed
- Yes
Deleterious
- Deleterious Flag
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-29T00:00:00.000Z
Reasoning: This intercept of 0.60m at 43.09 g/t Au is a bonanza grade, indicating extremely high-grade mineralization within the Duffer Lode, which is highly positive for an underground operation.
Positive factors
- Bonanza gold grade
- Exceptional grade for underground mining
Negative factors
- Narrow intercept length
- Apparent width only
Evidence · text
“0.60m at 43.09 g/t Au, 13.6 g/t Ag and 0.57% Cu”
Tags used in scoring
No QA/QC Disclosurenegative
Release does not disclose QA/QC — lab certification, CP/QP sign-off and assay protocols cannot be checked from this document.
Why it applies: qaqc_disclosed is not true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
DTDD058Dittmer · silverGrade: 13.6Grade Unit: g/tIntercept: 0.6 mView all detailsHide details
Identity
- Hole ID
- DTDD058
- Project
- Dittmer
- Commodity
- silver
- Region
- australia_qld
- Reported Region
- australia_qld
- Ticker
- BMR
Geometry
- Grade
- 13.6
- Grade Unit
- g/t
- Intercept
- 0.6 m
Classification
- Deposit Type
- orogenic
- Program
- resource
- Sample Type
- drill
- Mining Method
- underground
QA/QC
- QP Signed
- Yes
Deleterious
- Deleterious Flag
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-29T00:00:00.000Z
Reasoning: The silver grade of 13.6 g/t over 0.60m, while not exceptional on its own, adds to the polymetallic value of the bonanza gold intercept.
Positive factors
- Supports polymetallic nature of bonanza intercept
Negative factors
- Apparent width only
Evidence · text
“0.60m at 43.09 g/t Au, 13.6 g/t Ag and 0.57% Cu”
Tags used in scoring
No QA/QC Disclosurenegative
Release does not disclose QA/QC — lab certification, CP/QP sign-off and assay protocols cannot be checked from this document.
Why it applies: qaqc_disclosed is not true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
DTDD058Dittmer · copperGrade: 0.57Grade Unit: %Intercept: 0.6 mView all detailsHide details
Identity
- Hole ID
- DTDD058
- Project
- Dittmer
- Commodity
- copper
- Region
- australia_qld
- Reported Region
- australia_qld
- Ticker
- BMR
Geometry
- Grade
- 0.57
- Grade Unit
- %
- Intercept
- 0.6 m
Classification
- Deposit Type
- orogenic
- Program
- resource
- Sample Type
- drill
- Mining Method
- underground
QA/QC
- QP Signed
- Yes
Deleterious
- Deleterious Flag
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-29T00:00:00.000Z
Reasoning: The copper grade of 0.57% over 0.60m is a strong contribution to the polymetallic bonanza intercept, enhancing its overall value.
Positive factors
- Strong copper grade for polymetallic intercept
- Adds to overall metal content
Negative factors
- Narrow intercept length
- Apparent width only
Evidence · text
“0.60m at 43.09 g/t Au, 13.6 g/t Ag and 0.57% Cu”
Tags used in scoring
No QA/QC Disclosurenegative
Release does not disclose QA/QC — lab certification, CP/QP sign-off and assay protocols cannot be checked from this document.
Why it applies: qaqc_disclosed is not true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
DTDD060Dittmer · goldGrade: 41.28Grade Unit: g/tIntercept: 0.5 mView all detailsHide details
Identity
- Hole ID
- DTDD060
- Project
- Dittmer
- Commodity
- gold
- Region
- australia_qld
- Reported Region
- australia_qld
- Ticker
- BMR
Geometry
- Grade
- 41.28
- Grade Unit
- g/t
- Intercept
- 0.5 m
Classification
- Deposit Type
- orogenic
- Program
- resource
- Sample Type
- drill
- Mining Method
- underground
QA/QC
- QP Signed
- Yes
Deleterious
- Deleterious Flag
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-29T00:00:00.000Z
Reasoning: This intercept of 0.50m at 41.28 g/t Au is a bonanza grade, demonstrating extremely high-grade gold mineralization, which is highly positive for an underground operation despite the narrow width.
Positive factors
- Bonanza gold grade
- Exceptional grade for underground mining
Negative factors
- Very narrow intercept length
- Apparent width only
Evidence · text
“0.50m at 41.28 g/t Au, 128.5 g/t Ag and 5.63% Cu”
Tags used in scoring
No QA/QC Disclosurenegative
Release does not disclose QA/QC — lab certification, CP/QP sign-off and assay protocols cannot be checked from this document.
Why it applies: qaqc_disclosed is not true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
DTDD060Dittmer · silverGrade: 128.5Grade Unit: g/tIntercept: 0.5 mView all detailsHide details
Identity
- Hole ID
- DTDD060
- Project
- Dittmer
- Commodity
- silver
- Region
- australia_qld
- Reported Region
- australia_qld
- Ticker
- BMR
Geometry
- Grade
- 128.5
- Grade Unit
- g/t
- Intercept
- 0.5 m
Classification
- Deposit Type
- orogenic
- Program
- resource
- Sample Type
- drill
- Mining Method
- underground
QA/QC
- QP Signed
- Yes
Deleterious
- Deleterious Flag
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-29T00:00:00.000Z
Reasoning: The silver grade of 128.5 g/t over 0.50m is a strong contribution to the polymetallic bonanza intercept, adding significant value to the narrow high-grade zone.
Positive factors
- Strong silver grade for polymetallic intercept
- Adds significant value to the narrow zone
Negative factors
- Very narrow intercept length
- Apparent width only
Evidence · text
“0.50m at 41.28 g/t Au, 128.5 g/t Ag and 5.63% Cu”
Tags used in scoring
No QA/QC Disclosurenegative
Release does not disclose QA/QC — lab certification, CP/QP sign-off and assay protocols cannot be checked from this document.
Why it applies: qaqc_disclosed is not true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
DTDD060Dittmer · copperGrade: 5.63Grade Unit: %Intercept: 0.5 mView all detailsHide details
Identity
- Hole ID
- DTDD060
- Project
- Dittmer
- Commodity
- copper
- Region
- australia_qld
- Reported Region
- australia_qld
- Ticker
- BMR
Geometry
- Grade
- 5.63
- Grade Unit
- %
- Intercept
- 0.5 m
Classification
- Deposit Type
- orogenic
- Program
- resource
- Sample Type
- drill
- Mining Method
- underground
QA/QC
- QP Signed
- Yes
Deleterious
- Deleterious Flag
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-29T00:00:00.000Z
Reasoning: The copper grade of 5.63% over 0.50m is exceptional, significantly enhancing the value of this narrow, high-grade polymetallic intercept.
Positive factors
- Exceptional copper grade for polymetallic intercept
- Adds significant value to the narrow zone
Negative factors
- Very narrow intercept length
- Apparent width only
Evidence · text
“0.50m at 41.28 g/t Au, 128.5 g/t Ag and 5.63% Cu”
Tags used in scoring
No QA/QC Disclosurenegative
Release does not disclose QA/QC — lab certification, CP/QP sign-off and assay protocols cannot be checked from this document.
Why it applies: qaqc_disclosed is not true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
DTDD061Dittmer · goldGrade: 24.54Grade Unit: g/tIntercept: 1.1 mView all detailsHide details
Identity
- Hole ID
- DTDD061
- Project
- Dittmer
- Commodity
- gold
- Region
- australia_qld
- Reported Region
- australia_qld
- Ticker
- BMR
Geometry
- Grade
- 24.54
- Grade Unit
- g/t
- Intercept
- 1.1 m
Classification
- Deposit Type
- orogenic
- Program
- resource
- Sample Type
- drill
- Mining Method
- underground
QA/QC
- QP Signed
- Yes
Deleterious
- Deleterious Flag
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-29T00:00:00.000Z
Reasoning: This intercept of 1.10m at 24.54 g/t Au is a very strong result, further supporting the company's structural interpretation and the presence of high-grade mineralization.
Positive factors
- Very high-grade gold intercept
- Supports structural interpretation
Negative factors
- Narrow intercept length
- Apparent width only
Evidence · text
“1.10m at 24.54 g/t Au, 8.3 g/t Ag and 0.45% Cu”
Tags used in scoring
No QA/QC Disclosurenegative
Release does not disclose QA/QC — lab certification, CP/QP sign-off and assay protocols cannot be checked from this document.
Why it applies: qaqc_disclosed is not true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
DTDD061Dittmer · silverGrade: 8.3Grade Unit: g/tIntercept: 1.1 mView all detailsHide details
Identity
- Hole ID
- DTDD061
- Project
- Dittmer
- Commodity
- silver
- Region
- australia_qld
- Reported Region
- australia_qld
- Ticker
- BMR
Geometry
- Grade
- 8.3
- Grade Unit
- g/t
- Intercept
- 1.1 m
Classification
- Deposit Type
- orogenic
- Program
- resource
- Sample Type
- drill
- Mining Method
- underground
QA/QC
- QP Signed
- Yes
Deleterious
- Deleterious Flag
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-29T00:00:00.000Z
Reasoning: The silver grade of 8.3 g/t over 1.10m contributes to the polymetallic nature of the high-grade intercept.
Positive factors
- Supports polymetallic nature of mineralization
Negative factors
- Apparent width only
Evidence · text
“1.10m at 24.54 g/t Au, 8.3 g/t Ag and 0.45% Cu”
Tags used in scoring
No QA/QC Disclosurenegative
Release does not disclose QA/QC — lab certification, CP/QP sign-off and assay protocols cannot be checked from this document.
Why it applies: qaqc_disclosed is not true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
DTDD061Dittmer · copperGrade: 0.45Grade Unit: %Intercept: 1.1 mView all detailsHide details
Identity
- Hole ID
- DTDD061
- Project
- Dittmer
- Commodity
- copper
- Region
- australia_qld
- Reported Region
- australia_qld
- Ticker
- BMR
Geometry
- Grade
- 0.45
- Grade Unit
- %
- Intercept
- 1.1 m
Classification
- Deposit Type
- orogenic
- Program
- resource
- Sample Type
- drill
- Mining Method
- underground
QA/QC
- QP Signed
- Yes
Deleterious
- Deleterious Flag
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-29T00:00:00.000Z
Reasoning: The copper grade of 0.45% over 1.10m is a strong contribution to the polymetallic high-grade intercept, enhancing its overall value.
Positive factors
- Strong copper grade for polymetallic intercept
- Adds to overall metal content
Negative factors
- Apparent width only
Evidence · text
“1.10m at 24.54 g/t Au, 8.3 g/t Ag and 0.45% Cu”
Tags used in scoring
No QA/QC Disclosurenegative
Release does not disclose QA/QC — lab certification, CP/QP sign-off and assay protocols cannot be checked from this document.
Why it applies: qaqc_disclosed is not true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
DTDD061Dittmer · goldGrade: 76.39Grade Unit: g/tIntercept: 0.35 mView all detailsHide details
Identity
- Hole ID
- DTDD061
- Project
- Dittmer
- Commodity
- gold
- Region
- australia_qld
- Reported Region
- australia_qld
- Ticker
- BMR
Geometry
- Grade
- 76.39
- Grade Unit
- g/t
- Intercept
- 0.35 m
Classification
- Deposit Type
- orogenic
- Program
- resource
- Sample Type
- drill
- Mining Method
- underground
QA/QC
- QP Signed
- Yes
Deleterious
- Deleterious Flag
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-29T00:00:00.000Z
Reasoning: This intercept of 0.35m at 76.39 g/t Au is a bonanza grade, indicating extremely high-grade gold mineralization, which is highly positive for an underground operation despite the very narrow width.
Positive factors
- Bonanza gold grade
- Exceptional grade for underground mining
Negative factors
- Very narrow intercept length
- Apparent width only
Evidence · text
“0.35m at 76.39 g/t Au, 25.71 g/t Ag and 1.40% Cu”
Tags used in scoring
No QA/QC Disclosurenegative
Release does not disclose QA/QC — lab certification, CP/QP sign-off and assay protocols cannot be checked from this document.
Why it applies: qaqc_disclosed is not true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
DTDD061Dittmer · silverGrade: 25.71Grade Unit: g/tIntercept: 0.35 mView all detailsHide details
Identity
- Hole ID
- DTDD061
- Project
- Dittmer
- Commodity
- silver
- Region
- australia_qld
- Reported Region
- australia_qld
- Ticker
- BMR
Geometry
- Grade
- 25.71
- Grade Unit
- g/t
- Intercept
- 0.35 m
Classification
- Deposit Type
- orogenic
- Program
- resource
- Sample Type
- drill
- Mining Method
- underground
QA/QC
- QP Signed
- Yes
Deleterious
- Deleterious Flag
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-29T00:00:00.000Z
Reasoning: The silver grade of 25.71 g/t over 0.35m, while not exceptional on its own, adds to the polymetallic value of the bonanza gold intercept.
Positive factors
- Supports polymetallic nature of bonanza intercept
Negative factors
- Very narrow intercept length
- Apparent width only
Evidence · text
“0.35m at 76.39 g/t Au, 25.71 g/t Ag and 1.40% Cu”
Tags used in scoring
No QA/QC Disclosurenegative
Release does not disclose QA/QC — lab certification, CP/QP sign-off and assay protocols cannot be checked from this document.
Why it applies: qaqc_disclosed is not true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
DTDD061Dittmer · copperGrade: 1.4Grade Unit: %Intercept: 0.35 mView all detailsHide details
Identity
- Hole ID
- DTDD061
- Project
- Dittmer
- Commodity
- copper
- Region
- australia_qld
- Reported Region
- australia_qld
- Ticker
- BMR
Geometry
- Grade
- 1.4
- Grade Unit
- %
- Intercept
- 0.35 m
Classification
- Deposit Type
- orogenic
- Program
- resource
- Sample Type
- drill
- Mining Method
- underground
QA/QC
- QP Signed
- Yes
Deleterious
- Deleterious Flag
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-29T00:00:00.000Z
Reasoning: The copper grade of 1.40% over 0.35m is very strong, significantly enhancing the value of this narrow, high-grade polymetallic intercept.
Positive factors
- Very strong copper grade for polymetallic intercept
- Adds significant value to the narrow zone
Negative factors
- Very narrow intercept length
- Apparent width only
Evidence · text
“0.35m at 76.39 g/t Au, 25.71 g/t Ag and 1.40% Cu”
Tags used in scoring
No QA/QC Disclosurenegative
Release does not disclose QA/QC — lab certification, CP/QP sign-off and assay protocols cannot be checked from this document.
Why it applies: qaqc_disclosed is not true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
BTPRC002Ruddygore Project: Torpy’s · silverGrade: 226.7Grade Unit: g/tIntercept: 6 mView all detailsHide details
Identity
- Hole ID
- BTPRC002
- Project
- Ruddygore Project: Torpy’s
- Commodity
- silver
- Region
- australia_qld
- Reported Region
- australia_qld
- Ticker
- BMR
Geometry
- Grade
- 226.7
- Grade Unit
- g/t
- Intercept
- 6 m
- From
- 87 m
- To
- 93 m
- Intercept Depth
- 87 m
Classification
- Deposit Type
- sedex
- Program
- exploration
- Sample Type
- drill
- Group ID
- BTPRC002:87-93
- Mining Method
- unknown
QA/QC
- QP Signed
- Yes
Deleterious
- Deleterious Flag
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-29T00:00:00.000Z
Reasoning: This intercept of 6m at 226.7 g/t Ag is a strong result for the new Torpy's discovery, significantly above the project's historical average and best silver grades.
Positive factors
- High-grade silver intercept
- Part of new polymetallic discovery
- Above prior project average and best grade
Negative factors
- Apparent width only
Evidence · text
“6m @ 226.7 g/t Ag, 8.73% Pb, 7.58% Zn & 6.5 g/t In from 87m”
Tags used in scoring
No QA/QC Disclosurenegative
Release does not disclose QA/QC — lab certification, CP/QP sign-off and assay protocols cannot be checked from this document.
Why it applies: qaqc_disclosed is not true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
BTPRC002Ruddygore Project: Torpy’s · leadGrade: 8.73Grade Unit: %Intercept: 6 mView all detailsHide details
Identity
- Hole ID
- BTPRC002
- Project
- Ruddygore Project: Torpy’s
- Commodity
- lead
- Region
- australia_qld
- Reported Region
- australia_qld
- Ticker
- BMR
Geometry
- Grade
- 8.73
- Grade Unit
- %
- Intercept
- 6 m
- From
- 87 m
- To
- 93 m
- Intercept Depth
- 87 m
Classification
- Deposit Type
- sedex
- Program
- exploration
- Sample Type
- drill
- Group ID
- BTPRC002:87-93
- Mining Method
- unknown
QA/QC
- QP Signed
- Yes
Deleterious
- Deleterious Flag
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-29T00:00:00.000Z
Reasoning: The lead grade of 8.73% over 6m is a strong result for the new Torpy's discovery, well above the project's historical average lead grade.
Positive factors
- Strong lead grade
- Part of new polymetallic discovery
- Above prior project average
Negative factors
- Apparent width only
Evidence · text
“6m @ 226.7 g/t Ag, 8.73% Pb, 7.58% Zn & 6.5 g/t In from 87m”
Tags used in scoring
No QA/QC Disclosurenegative
Release does not disclose QA/QC — lab certification, CP/QP sign-off and assay protocols cannot be checked from this document.
Why it applies: qaqc_disclosed is not true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
BTPRC002Ruddygore Project: Torpy’s · zincGrade: 7.58Grade Unit: %Intercept: 6 mView all detailsHide details
Identity
- Hole ID
- BTPRC002
- Project
- Ruddygore Project: Torpy’s
- Commodity
- zinc
- Region
- australia_qld
- Reported Region
- australia_qld
- Ticker
- BMR
Geometry
- Grade
- 7.58
- Grade Unit
- %
- Intercept
- 6 m
- From
- 87 m
- To
- 93 m
- Intercept Depth
- 87 m
Classification
- Deposit Type
- sedex
- Program
- exploration
- Sample Type
- drill
- Group ID
- BTPRC002:87-93
- Mining Method
- unknown
QA/QC
- QP Signed
- Yes
Deleterious
- Deleterious Flag
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-29T00:00:00.000Z
Reasoning: The zinc grade of 7.58% over 6m is a strong result for the new Torpy's discovery, well above the project's historical average zinc grade.
Positive factors
- Strong zinc grade
- Part of new polymetallic discovery
- Above prior project average
Negative factors
- Apparent width only
Evidence · text
“6m @ 226.7 g/t Ag, 8.73% Pb, 7.58% Zn & 6.5 g/t In from 87m”
Tags used in scoring
No QA/QC Disclosurenegative
Release does not disclose QA/QC — lab certification, CP/QP sign-off and assay protocols cannot be checked from this document.
Why it applies: qaqc_disclosed is not true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
BTPRC002Ruddygore Project: Torpy’s · indiumGrade: 6.5Grade Unit: g/tIntercept: 6 mView all detailsHide details
Identity
- Hole ID
- BTPRC002
- Project
- Ruddygore Project: Torpy’s
- Commodity
- indium
- Region
- australia_qld
- Reported Region
- australia_qld
- Ticker
- BMR
Geometry
- Grade
- 6.5
- Grade Unit
- g/t
- Intercept
- 6 m
- From
- 87 m
- To
- 93 m
- Intercept Depth
- 87 m
Classification
- Deposit Type
- sedex
- Program
- exploration
- Sample Type
- drill
- Group ID
- BTPRC002:87-93
- Mining Method
- unknown
QA/QC
- QP Signed
- Yes
Deleterious
- Deleterious Flag
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-29T00:00:00.000Z
Reasoning: The indium grade of 6.5 g/t over 6m is a strong result for the new Torpy's discovery, well above the project's historical average indium grade.
Positive factors
- Strong indium grade
- Part of new polymetallic discovery
- Above prior project average
Negative factors
- Apparent width only
Evidence · text
“6m @ 226.7 g/t Ag, 8.73% Pb, 7.58% Zn & 6.5 g/t In from 87m”
Tags used in scoring
No QA/QC Disclosurenegative
Release does not disclose QA/QC — lab certification, CP/QP sign-off and assay protocols cannot be checked from this document.
Why it applies: qaqc_disclosed is not true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
BTPRC002Ruddygore Project: Torpy’s · silverGrade: 350.1Grade Unit: g/tIntercept: 3 mView all detailsHide details
Identity
- Hole ID
- BTPRC002
- Project
- Ruddygore Project: Torpy’s
- Commodity
- silver
- Region
- australia_qld
- Reported Region
- australia_qld
- Ticker
- BMR
Geometry
- Grade
- 350.1
- Grade Unit
- g/t
- Intercept
- 3 m
- From
- 87 m
- To
- 90 m
- Intercept Depth
- 87 m
Classification
- Deposit Type
- sedex
- Program
- exploration
- Sample Type
- drill
- Group ID
- BTPRC002:87-90
- Mining Method
- unknown
QA/QC
- QP Signed
- Yes
Deleterious
- Deleterious Flag
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-29T00:00:00.000Z
Reasoning: This sub-interval of 3m at 350.1 g/t Ag is a bonanza grade, significantly exceeding the project's historical best silver grade and highlighting the high-grade potential of the new discovery.
Positive factors
- Bonanza silver grade
- Part of new polymetallic discovery
- Significantly above prior project average and best grade
Negative factors
- Apparent width only
Evidence · text
“3m @ 350.1 g/t Ag, 13.05% Pb, 10.48% Zn & 7.7 g/t In from 87m”
Tags used in scoring
No QA/QC Disclosurenegative
Release does not disclose QA/QC — lab certification, CP/QP sign-off and assay protocols cannot be checked from this document.
Why it applies: qaqc_disclosed is not true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
BTPRC002Ruddygore Project: Torpy’s · leadGrade: 13.05Grade Unit: %Intercept: 3 mView all detailsHide details
Identity
- Hole ID
- BTPRC002
- Project
- Ruddygore Project: Torpy’s
- Commodity
- lead
- Region
- australia_qld
- Reported Region
- australia_qld
- Ticker
- BMR
Geometry
- Grade
- 13.05
- Grade Unit
- %
- Intercept
- 3 m
- From
- 87 m
- To
- 90 m
- Intercept Depth
- 87 m
Classification
- Deposit Type
- sedex
- Program
- exploration
- Sample Type
- drill
- Group ID
- BTPRC002:87-90
- Mining Method
- unknown
QA/QC
- QP Signed
- Yes
Deleterious
- Deleterious Flag
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-29T00:00:00.000Z
Reasoning: The lead grade of 13.05% over 3m is a very strong result for the new Torpy's discovery, well above the project's historical average lead grade.
Positive factors
- Very strong lead grade
- Part of new polymetallic discovery
- Well above prior project average
Negative factors
- Apparent width only
Evidence · text
“3m @ 350.1 g/t Ag, 13.05% Pb, 10.48% Zn & 7.7 g/t In from 87m”
Tags used in scoring
No QA/QC Disclosurenegative
Release does not disclose QA/QC — lab certification, CP/QP sign-off and assay protocols cannot be checked from this document.
Why it applies: qaqc_disclosed is not true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
BTPRC002Ruddygore Project: Torpy’s · zincGrade: 10.48Grade Unit: %Intercept: 3 mView all detailsHide details
Identity
- Hole ID
- BTPRC002
- Project
- Ruddygore Project: Torpy’s
- Commodity
- zinc
- Region
- australia_qld
- Reported Region
- australia_qld
- Ticker
- BMR
Geometry
- Grade
- 10.48
- Grade Unit
- %
- Intercept
- 3 m
- From
- 87 m
- To
- 90 m
- Intercept Depth
- 87 m
Classification
- Deposit Type
- sedex
- Program
- exploration
- Sample Type
- drill
- Group ID
- BTPRC002:87-90
- Mining Method
- unknown
QA/QC
- QP Signed
- Yes
Deleterious
- Deleterious Flag
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-29T00:00:00.000Z
Reasoning: The zinc grade of 10.48% over 3m is a very strong result for the new Torpy's discovery, well above the project's historical average zinc grade.
Positive factors
- Very strong zinc grade
- Part of new polymetallic discovery
- Well above prior project average
Negative factors
- Apparent width only
Evidence · text
“3m @ 350.1 g/t Ag, 13.05% Pb, 10.48% Zn & 7.7 g/t In from 87m”
Tags used in scoring
No QA/QC Disclosurenegative
Release does not disclose QA/QC — lab certification, CP/QP sign-off and assay protocols cannot be checked from this document.
Why it applies: qaqc_disclosed is not true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
BTPRC002Ruddygore Project: Torpy’s · indiumGrade: 7.7Grade Unit: g/tIntercept: 3 mView all detailsHide details
Identity
- Hole ID
- BTPRC002
- Project
- Ruddygore Project: Torpy’s
- Commodity
- indium
- Region
- australia_qld
- Reported Region
- australia_qld
- Ticker
- BMR
Geometry
- Grade
- 7.7
- Grade Unit
- g/t
- Intercept
- 3 m
- From
- 87 m
- To
- 90 m
- Intercept Depth
- 87 m
Classification
- Deposit Type
- sedex
- Program
- exploration
- Sample Type
- drill
- Group ID
- BTPRC002:87-90
- Mining Method
- unknown
QA/QC
- QP Signed
- Yes
Deleterious
- Deleterious Flag
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-29T00:00:00.000Z
Reasoning: The indium grade of 7.7 g/t over 3m is a strong result for the new Torpy's discovery, well above the project's historical average indium grade.
Positive factors
- Strong indium grade
- Part of new polymetallic discovery
- Above prior project average
Negative factors
- Apparent width only
Evidence · text
“3m @ 350.1 g/t Ag, 13.05% Pb, 10.48% Zn & 7.7 g/t In from 87m”
Tags used in scoring
No QA/QC Disclosurenegative
Release does not disclose QA/QC — lab certification, CP/QP sign-off and assay protocols cannot be checked from this document.
Why it applies: qaqc_disclosed is not true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
BTPRC002Ruddygore Project: Torpy’s · silverGrade: 91.6Grade Unit: g/tIntercept: 16 mView all detailsHide details
Identity
- Hole ID
- BTPRC002
- Project
- Ruddygore Project: Torpy’s
- Commodity
- silver
- Region
- australia_qld
- Reported Region
- australia_qld
- Ticker
- BMR
Geometry
- Grade
- 91.6
- Grade Unit
- g/t
- Intercept
- 16 m
- From
- 125 m
- To
- 141 m
- Intercept Depth
- 125 m
Classification
- Deposit Type
- sedex
- Program
- exploration
- Sample Type
- drill
- Group ID
- BTPRC002:125-141
- Mining Method
- unknown
QA/QC
- QP Signed
- Yes
Deleterious
- Deleterious Flag
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-29T00:00:00.000Z
Reasoning: This intercept of 16m at 91.6 g/t Ag is a moderate result for the new Torpy's discovery, contributing to the overall polymetallic mineralization over a good width.
Positive factors
- Moderate silver grade over good width
- Part of new polymetallic discovery
Negative factors
- Below prior project average
- Apparent width only
Evidence · text
“16m @ 91.6 g/t Ag, 4.04% Pb, 3.67% Zn & 12.3 g/t In from 125m”
Tags used in scoring
No QA/QC Disclosurenegative
Release does not disclose QA/QC — lab certification, CP/QP sign-off and assay protocols cannot be checked from this document.
Why it applies: qaqc_disclosed is not true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
BTPRC002Ruddygore Project: Torpy’s · leadGrade: 4.04Grade Unit: %Intercept: 16 mView all detailsHide details
Identity
- Hole ID
- BTPRC002
- Project
- Ruddygore Project: Torpy’s
- Commodity
- lead
- Region
- australia_qld
- Reported Region
- australia_qld
- Ticker
- BMR
Geometry
- Grade
- 4.04
- Grade Unit
- %
- Intercept
- 16 m
- From
- 125 m
- To
- 141 m
- Intercept Depth
- 125 m
Classification
- Deposit Type
- sedex
- Program
- exploration
- Sample Type
- drill
- Group ID
- BTPRC002:125-141
- Mining Method
- unknown
QA/QC
- QP Signed
- Yes
Deleterious
- Deleterious Flag
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-29T00:00:00.000Z
Reasoning: The lead grade of 4.04% over 16m is a moderate result for the new Torpy's discovery, contributing to the overall polymetallic mineralization over a good width.
Positive factors
- Moderate lead grade over good width
- Part of new polymetallic discovery
Negative factors
- Below prior project average
- Apparent width only
Evidence · text
“16m @ 91.6 g/t Ag, 4.04% Pb, 3.67% Zn & 12.3 g/t In from 125m”
Tags used in scoring
No QA/QC Disclosurenegative
Release does not disclose QA/QC — lab certification, CP/QP sign-off and assay protocols cannot be checked from this document.
Why it applies: qaqc_disclosed is not true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
BTPRC002Ruddygore Project: Torpy’s · zincGrade: 3.67Grade Unit: %Intercept: 16 mView all detailsHide details
Identity
- Hole ID
- BTPRC002
- Project
- Ruddygore Project: Torpy’s
- Commodity
- zinc
- Region
- australia_qld
- Reported Region
- australia_qld
- Ticker
- BMR
Geometry
- Grade
- 3.67
- Grade Unit
- %
- Intercept
- 16 m
- From
- 125 m
- To
- 141 m
- Intercept Depth
- 125 m
Classification
- Deposit Type
- sedex
- Program
- exploration
- Sample Type
- drill
- Group ID
- BTPRC002:125-141
- Mining Method
- unknown
QA/QC
- QP Signed
- Yes
Deleterious
- Deleterious Flag
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-29T00:00:00.000Z
Reasoning: The zinc grade of 3.67% over 16m is a moderate result for the new Torpy's discovery, contributing to the overall polymetallic mineralization over a good width.
Positive factors
- Moderate zinc grade over good width
- Part of new polymetallic discovery
Negative factors
- Below prior project average
- Apparent width only
Evidence · text
“16m @ 91.6 g/t Ag, 4.04% Pb, 3.67% Zn & 12.3 g/t In from 125m”
Tags used in scoring
No QA/QC Disclosurenegative
Release does not disclose QA/QC — lab certification, CP/QP sign-off and assay protocols cannot be checked from this document.
Why it applies: qaqc_disclosed is not true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
BTPRC002Ruddygore Project: Torpy’s · indiumGrade: 12.3Grade Unit: g/tIntercept: 16 mView all detailsHide details
Identity
- Hole ID
- BTPRC002
- Project
- Ruddygore Project: Torpy’s
- Commodity
- indium
- Region
- australia_qld
- Reported Region
- australia_qld
- Ticker
- BMR
Geometry
- Grade
- 12.3
- Grade Unit
- g/t
- Intercept
- 16 m
- From
- 125 m
- To
- 141 m
- Intercept Depth
- 125 m
Classification
- Deposit Type
- sedex
- Program
- exploration
- Sample Type
- drill
- Group ID
- BTPRC002:125-141
- Mining Method
- unknown
QA/QC
- QP Signed
- Yes
Deleterious
- Deleterious Flag
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-29T00:00:00.000Z
Reasoning: The indium grade of 12.3 g/t over 16m is a very strong result for the new Torpy's discovery, exceeding the project's historical best indium grade and adding significant value.
Positive factors
- Very strong indium grade
- Part of new polymetallic discovery
- Above prior project average and best grade
Negative factors
- Apparent width only
Evidence · text
“16m @ 91.6 g/t Ag, 4.04% Pb, 3.67% Zn & 12.3 g/t In from 125m”
Tags used in scoring
No QA/QC Disclosurenegative
Release does not disclose QA/QC — lab certification, CP/QP sign-off and assay protocols cannot be checked from this document.
Why it applies: qaqc_disclosed is not true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
BTPRC002Ruddygore Project: Torpy’s · silverGrade: 285.1Grade Unit: g/tIntercept: 2 mView all detailsHide details
Identity
- Hole ID
- BTPRC002
- Project
- Ruddygore Project: Torpy’s
- Commodity
- silver
- Region
- australia_qld
- Reported Region
- australia_qld
- Ticker
- BMR
Geometry
- Grade
- 285.1
- Grade Unit
- g/t
- Intercept
- 2 m
- From
- 137 m
- To
- 139 m
- Intercept Depth
- 137 m
Classification
- Deposit Type
- sedex
- Program
- exploration
- Sample Type
- drill
- Group ID
- BTPRC002:137-139
- Mining Method
- unknown
QA/QC
- QP Signed
- Yes
Deleterious
- Deleterious Flag
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-29T00:00:00.000Z
Reasoning: This sub-interval of 2m at 285.1 g/t Ag is a bonanza grade, significantly exceeding the project's historical best silver grade and highlighting the high-grade potential of the new discovery.
Positive factors
- Bonanza silver grade
- Part of new polymetallic discovery
- Significantly above prior project average and best grade
Negative factors
- Apparent width only
Evidence · text
“2m @ 285.1 g/t Ag, 11.74% Pb, 6.05% Zn & 24.7 g/t In from 137m”
Tags used in scoring
No QA/QC Disclosurenegative
Release does not disclose QA/QC — lab certification, CP/QP sign-off and assay protocols cannot be checked from this document.
Why it applies: qaqc_disclosed is not true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
BTPRC002Ruddygore Project: Torpy’s · leadGrade: 11.74Grade Unit: %Intercept: 2 mView all detailsHide details
Identity
- Hole ID
- BTPRC002
- Project
- Ruddygore Project: Torpy’s
- Commodity
- lead
- Region
- australia_qld
- Reported Region
- australia_qld
- Ticker
- BMR
Geometry
- Grade
- 11.74
- Grade Unit
- %
- Intercept
- 2 m
- From
- 137 m
- To
- 139 m
- Intercept Depth
- 137 m
Classification
- Deposit Type
- sedex
- Program
- exploration
- Sample Type
- drill
- Group ID
- BTPRC002:137-139
- Mining Method
- unknown
QA/QC
- QP Signed
- Yes
Deleterious
- Deleterious Flag
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-29T00:00:00.000Z
Reasoning: The lead grade of 11.74% over 2m is a very strong result for the new Torpy's discovery, well above the project's historical average lead grade.
Positive factors
- Very strong lead grade
- Part of new polymetallic discovery
- Well above prior project average
Negative factors
- Apparent width only
Evidence · text
“2m @ 285.1 g/t Ag, 11.74% Pb, 6.05% Zn & 24.7 g/t In from 137m”
Tags used in scoring
No QA/QC Disclosurenegative
Release does not disclose QA/QC — lab certification, CP/QP sign-off and assay protocols cannot be checked from this document.
Why it applies: qaqc_disclosed is not true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
BTPRC002Ruddygore Project: Torpy’s · zincGrade: 6.05Grade Unit: %Intercept: 2 mView all detailsHide details
Identity
- Hole ID
- BTPRC002
- Project
- Ruddygore Project: Torpy’s
- Commodity
- zinc
- Region
- australia_qld
- Reported Region
- australia_qld
- Ticker
- BMR
Geometry
- Grade
- 6.05
- Grade Unit
- %
- Intercept
- 2 m
- From
- 137 m
- To
- 139 m
- Intercept Depth
- 137 m
Classification
- Deposit Type
- sedex
- Program
- exploration
- Sample Type
- drill
- Group ID
- BTPRC002:137-139
- Mining Method
- unknown
QA/QC
- QP Signed
- Yes
Deleterious
- Deleterious Flag
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-29T00:00:00.000Z
Reasoning: The zinc grade of 6.05% over 2m is a strong result for the new Torpy's discovery, above the project's historical average zinc grade.
Positive factors
- Strong zinc grade
- Part of new polymetallic discovery
- Above prior project average
Negative factors
- Apparent width only
Evidence · text
“2m @ 285.1 g/t Ag, 11.74% Pb, 6.05% Zn & 24.7 g/t In from 137m”
Tags used in scoring
No QA/QC Disclosurenegative
Release does not disclose QA/QC — lab certification, CP/QP sign-off and assay protocols cannot be checked from this document.
Why it applies: qaqc_disclosed is not true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
BTPRC002Ruddygore Project: Torpy’s · indiumGrade: 24.7Grade Unit: g/tIntercept: 2 mView all detailsHide details
Identity
- Hole ID
- BTPRC002
- Project
- Ruddygore Project: Torpy’s
- Commodity
- indium
- Region
- australia_qld
- Reported Region
- australia_qld
- Ticker
- BMR
Geometry
- Grade
- 24.7
- Grade Unit
- g/t
- Intercept
- 2 m
- From
- 137 m
- To
- 139 m
- Intercept Depth
- 137 m
Classification
- Deposit Type
- sedex
- Program
- exploration
- Sample Type
- drill
- Group ID
- BTPRC002:137-139
- Mining Method
- unknown
QA/QC
- QP Signed
- Yes
Deleterious
- Deleterious Flag
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-29T00:00:00.000Z
Reasoning: The indium grade of 24.7 g/t over 2m is exceptional, significantly exceeding the project's historical best indium grade and adding substantial value to the new discovery.
Positive factors
- Exceptional indium grade
- Part of new polymetallic discovery
- Significantly above prior project average and best grade
Negative factors
- Apparent width only
Evidence · text
“2m @ 285.1 g/t Ag, 11.74% Pb, 6.05% Zn & 24.7 g/t In from 137m”
Tags used in scoring
No QA/QC Disclosurenegative
Release does not disclose QA/QC — lab certification, CP/QP sign-off and assay protocols cannot be checked from this document.
Why it applies: qaqc_disclosed is not true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
BTPRC004Ruddygore Project: Torpy’s · silverGrade: 124.1Grade Unit: g/tIntercept: 15 mView all detailsHide details
Identity
- Hole ID
- BTPRC004
- Project
- Ruddygore Project: Torpy’s
- Commodity
- silver
- Region
- australia_qld
- Reported Region
- australia_qld
- Ticker
- BMR
Geometry
- Grade
- 124.1
- Grade Unit
- g/t
- Intercept
- 15 m
- From
- 101 m
- To
- 116 m
- Intercept Depth
- 101 m
Classification
- Deposit Type
- sedex
- Program
- exploration
- Sample Type
- drill
- Group ID
- BTPRC004:101-116
- Mining Method
- unknown
QA/QC
- QP Signed
- Yes
Deleterious
- Deleterious Flag
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-29T00:00:00.000Z
Reasoning: This intercept of 15m at 124.1 g/t Ag is a strong result for the new Torpy's discovery, above the project's historical average silver grade and indicating good continuity.
Positive factors
- High-grade silver intercept over good width
- Part of new polymetallic discovery
- Above prior project average
Negative factors
- Apparent width only
Evidence · text
“15m @ 124.1 g/t Ag, 6.55% Pb, 6.69% Zn & 7.3 g/t In from 101m”
Tags used in scoring
No QA/QC Disclosurenegative
Release does not disclose QA/QC — lab certification, CP/QP sign-off and assay protocols cannot be checked from this document.
Why it applies: qaqc_disclosed is not true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
BTPRC004Ruddygore Project: Torpy’s · leadGrade: 6.55Grade Unit: %Intercept: 15 mView all detailsHide details
Identity
- Hole ID
- BTPRC004
- Project
- Ruddygore Project: Torpy’s
- Commodity
- lead
- Region
- australia_qld
- Reported Region
- australia_qld
- Ticker
- BMR
Geometry
- Grade
- 6.55
- Grade Unit
- %
- Intercept
- 15 m
- From
- 101 m
- To
- 116 m
- Intercept Depth
- 101 m
Classification
- Deposit Type
- sedex
- Program
- exploration
- Sample Type
- drill
- Group ID
- BTPRC004:101-116
- Mining Method
- unknown
QA/QC
- QP Signed
- Yes
Deleterious
- Deleterious Flag
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-29T00:00:00.000Z
Reasoning: The lead grade of 6.55% over 15m is a moderate result for the new Torpy's discovery, contributing to the overall polymetallic mineralization over a good width.
Positive factors
- Moderate lead grade over good width
- Part of new polymetallic discovery
Negative factors
- Below prior project average
- Apparent width only
Evidence · text
“15m @ 124.1 g/t Ag, 6.55% Pb, 6.69% Zn & 7.3 g/t In from 101m”
Tags used in scoring
No QA/QC Disclosurenegative
Release does not disclose QA/QC — lab certification, CP/QP sign-off and assay protocols cannot be checked from this document.
Why it applies: qaqc_disclosed is not true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
BTPRC004Ruddygore Project: Torpy’s · zincGrade: 6.69Grade Unit: %Intercept: 15 mView all detailsHide details
Identity
- Hole ID
- BTPRC004
- Project
- Ruddygore Project: Torpy’s
- Commodity
- zinc
- Region
- australia_qld
- Reported Region
- australia_qld
- Ticker
- BMR
Geometry
- Grade
- 6.69
- Grade Unit
- %
- Intercept
- 15 m
- From
- 101 m
- To
- 116 m
- Intercept Depth
- 101 m
Classification
- Deposit Type
- sedex
- Program
- exploration
- Sample Type
- drill
- Group ID
- BTPRC004:101-116
- Mining Method
- unknown
QA/QC
- QP Signed
- Yes
Deleterious
- Deleterious Flag
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-29T00:00:00.000Z
Reasoning: The zinc grade of 6.69% over 15m is a strong result for the new Torpy's discovery, above the project's historical average zinc grade and indicating good continuity.
Positive factors
- Strong zinc grade over good width
- Part of new polymetallic discovery
- Above prior project average
Negative factors
- Apparent width only
Evidence · text
“15m @ 124.1 g/t Ag, 6.55% Pb, 6.69% Zn & 7.3 g/t In from 101m”
Tags used in scoring
No QA/QC Disclosurenegative
Release does not disclose QA/QC — lab certification, CP/QP sign-off and assay protocols cannot be checked from this document.
Why it applies: qaqc_disclosed is not true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
BTPRC004Ruddygore Project: Torpy’s · indiumGrade: 7.3Grade Unit: g/tIntercept: 15 mView all detailsHide details
Identity
- Hole ID
- BTPRC004
- Project
- Ruddygore Project: Torpy’s
- Commodity
- indium
- Region
- australia_qld
- Reported Region
- australia_qld
- Ticker
- BMR
Geometry
- Grade
- 7.3
- Grade Unit
- g/t
- Intercept
- 15 m
- From
- 101 m
- To
- 116 m
- Intercept Depth
- 101 m
Classification
- Deposit Type
- sedex
- Program
- exploration
- Sample Type
- drill
- Group ID
- BTPRC004:101-116
- Mining Method
- unknown
QA/QC
- QP Signed
- Yes
Deleterious
- Deleterious Flag
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-29T00:00:00.000Z
Reasoning: The indium grade of 7.3 g/t over 15m is a strong result for the new Torpy's discovery, above the project's historical average indium grade and indicating good continuity.
Positive factors
- Strong indium grade over good width
- Part of new polymetallic discovery
- Above prior project average
Negative factors
- Apparent width only
Evidence · text
“15m @ 124.1 g/t Ag, 6.55% Pb, 6.69% Zn & 7.3 g/t In from 101m”
Tags used in scoring
No QA/QC Disclosurenegative
Release does not disclose QA/QC — lab certification, CP/QP sign-off and assay protocols cannot be checked from this document.
Why it applies: qaqc_disclosed is not true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
BTPRC004Ruddygore Project: Torpy’s · silverGrade: 280.6Grade Unit: g/tIntercept: 5 mView all detailsHide details
Identity
- Hole ID
- BTPRC004
- Project
- Ruddygore Project: Torpy’s
- Commodity
- silver
- Region
- australia_qld
- Reported Region
- australia_qld
- Ticker
- BMR
Geometry
- Grade
- 280.6
- Grade Unit
- g/t
- Intercept
- 5 m
- From
- 108 m
- To
- 113 m
- Intercept Depth
- 108 m
Classification
- Deposit Type
- sedex
- Program
- exploration
- Sample Type
- drill
- Group ID
- BTPRC004:108-113
- Mining Method
- unknown
QA/QC
- QP Signed
- Yes
Deleterious
- Deleterious Flag
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-29T00:00:00.000Z
Reasoning: This sub-interval of 5m at 280.6 g/t Ag is a bonanza grade, significantly exceeding the project's historical best silver grade and highlighting the high-grade potential of the new discovery.
Positive factors
- Bonanza silver grade
- Part of new polymetallic discovery
- Significantly above prior project average and best grade
Negative factors
- Apparent width only
Evidence · text
“5m @ 280.6 g/t Ag, 15.47% Pb, 11.33% Zn & 12.3 g/t In from 108m”
Tags used in scoring
No QA/QC Disclosurenegative
Release does not disclose QA/QC — lab certification, CP/QP sign-off and assay protocols cannot be checked from this document.
Why it applies: qaqc_disclosed is not true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
BTPRC004Ruddygore Project: Torpy’s · leadGrade: 15.47Grade Unit: %Intercept: 5 mView all detailsHide details
Identity
- Hole ID
- BTPRC004
- Project
- Ruddygore Project: Torpy’s
- Commodity
- lead
- Region
- australia_qld
- Reported Region
- australia_qld
- Ticker
- BMR
Geometry
- Grade
- 15.47
- Grade Unit
- %
- Intercept
- 5 m
- From
- 108 m
- To
- 113 m
- Intercept Depth
- 108 m
Classification
- Deposit Type
- sedex
- Program
- exploration
- Sample Type
- drill
- Group ID
- BTPRC004:108-113
- Mining Method
- unknown
QA/QC
- QP Signed
- Yes
Deleterious
- Deleterious Flag
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-29T00:00:00.000Z
Reasoning: The lead grade of 15.47% over 5m is an exceptional result for the new Torpy's discovery, well above the project's historical average lead grade and contributing significantly to the high-grade zone.
Positive factors
- Exceptional lead grade
- Part of new polymetallic discovery
- Well above prior project average
Negative factors
- Apparent width only
Evidence · text
“5m @ 280.6 g/t Ag, 15.47% Pb, 11.33% Zn & 12.3 g/t In from 108m”
Tags used in scoring
No QA/QC Disclosurenegative
Release does not disclose QA/QC — lab certification, CP/QP sign-off and assay protocols cannot be checked from this document.
Why it applies: qaqc_disclosed is not true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
BTPRC004Ruddygore Project: Torpy’s · zincGrade: 11.33Grade Unit: %Intercept: 5 mView all detailsHide details
Identity
- Hole ID
- BTPRC004
- Project
- Ruddygore Project: Torpy’s
- Commodity
- zinc
- Region
- australia_qld
- Reported Region
- australia_qld
- Ticker
- BMR
Geometry
- Grade
- 11.33
- Grade Unit
- %
- Intercept
- 5 m
- From
- 108 m
- To
- 113 m
- Intercept Depth
- 108 m
Classification
- Deposit Type
- sedex
- Program
- exploration
- Sample Type
- drill
- Group ID
- BTPRC004:108-113
- Mining Method
- unknown
QA/QC
- QP Signed
- Yes
Deleterious
- Deleterious Flag
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-29T00:00:00.000Z
Reasoning: The zinc grade of 11.33% over 5m is a very strong result for the new Torpy's discovery, well above the project's historical average zinc grade and contributing significantly to the high-grade zone.
Positive factors
- Very strong zinc grade
- Part of new polymetallic discovery
- Well above prior project average
Negative factors
- Apparent width only
Evidence · text
“5m @ 280.6 g/t Ag, 15.47% Pb, 11.33% Zn & 12.3 g/t In from 108m”
Tags used in scoring
No QA/QC Disclosurenegative
Release does not disclose QA/QC — lab certification, CP/QP sign-off and assay protocols cannot be checked from this document.
Why it applies: qaqc_disclosed is not true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
BTPRC004Ruddygore Project: Torpy’s · indiumGrade: 12.3Grade Unit: g/tIntercept: 5 mView all detailsHide details
Identity
- Hole ID
- BTPRC004
- Project
- Ruddygore Project: Torpy’s
- Commodity
- indium
- Region
- australia_qld
- Reported Region
- australia_qld
- Ticker
- BMR
Geometry
- Grade
- 12.3
- Grade Unit
- g/t
- Intercept
- 5 m
- From
- 108 m
- To
- 113 m
- Intercept Depth
- 108 m
Classification
- Deposit Type
- sedex
- Program
- exploration
- Sample Type
- drill
- Group ID
- BTPRC004:108-113
- Mining Method
- unknown
QA/QC
- QP Signed
- Yes
Deleterious
- Deleterious Flag
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-29T00:00:00.000Z
Reasoning: The indium grade of 12.3 g/t over 5m is a very strong result for the new Torpy's discovery, exceeding the project's historical best indium grade and adding significant value to the high-grade zone.
Positive factors
- Very strong indium grade
- Part of new polymetallic discovery
- Above prior project average and best grade
Negative factors
- Apparent width only
Evidence · text
“5m @ 280.6 g/t Ag, 15.47% Pb, 11.33% Zn & 12.3 g/t In from 108m”
Tags used in scoring
No QA/QC Disclosurenegative
Release does not disclose QA/QC — lab certification, CP/QP sign-off and assay protocols cannot be checked from this document.
Why it applies: qaqc_disclosed is not true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
BTPRC005Ruddygore Project: Torpy’s · silverGrade: 215.6Grade Unit: g/tIntercept: 23 mView all detailsHide details
Identity
- Hole ID
- BTPRC005
- Project
- Ruddygore Project: Torpy’s
- Commodity
- silver
- Region
- australia_qld
- Reported Region
- australia_qld
- Ticker
- BMR
Geometry
- Grade
- 215.6
- Grade Unit
- g/t
- Intercept
- 23 m
- From
- 130 m
- To
- 153 m
- Intercept Depth
- 130 m
Classification
- Deposit Type
- sedex
- Program
- exploration
- Sample Type
- drill
- Group ID
- BTPRC005:130-153
- Mining Method
- unknown
QA/QC
- QP Signed
- Yes
Deleterious
- Deleterious Flag
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-29T00:00:00.000Z
Reasoning: This intercept of 23m at 215.6 g/t Ag is a very strong result for the new Torpy's discovery, significantly above the project's historical average and best silver grades, indicating a substantial mineralized zone.
Positive factors
- High-grade silver intercept over significant width
- Part of new polymetallic discovery
- Above prior project average and best grade
Negative factors
- Apparent width only
Evidence · text
“23m @ 215.6 g/t Ag, 8.55% Pb, 1.99% Zn from 130m”
Tags used in scoring
No QA/QC Disclosurenegative
Release does not disclose QA/QC — lab certification, CP/QP sign-off and assay protocols cannot be checked from this document.
Why it applies: qaqc_disclosed is not true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
BTPRC005Ruddygore Project: Torpy’s · leadGrade: 8.55Grade Unit: %Intercept: 23 mView all detailsHide details
Identity
- Hole ID
- BTPRC005
- Project
- Ruddygore Project: Torpy’s
- Commodity
- lead
- Region
- australia_qld
- Reported Region
- australia_qld
- Ticker
- BMR
Geometry
- Grade
- 8.55
- Grade Unit
- %
- Intercept
- 23 m
- From
- 130 m
- To
- 153 m
- Intercept Depth
- 130 m
Classification
- Deposit Type
- sedex
- Program
- exploration
- Sample Type
- drill
- Group ID
- BTPRC005:130-153
- Mining Method
- unknown
QA/QC
- QP Signed
- Yes
Deleterious
- Deleterious Flag
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-29T00:00:00.000Z
Reasoning: The lead grade of 8.55% over 23m is a strong result for the new Torpy's discovery, well above the project's historical average lead grade, indicating a substantial mineralized zone.
Positive factors
- Strong lead grade over significant width
- Part of new polymetallic discovery
- Above prior project average
Negative factors
- Apparent width only
Evidence · text
“23m @ 215.6 g/t Ag, 8.55% Pb, 1.99% Zn from 130m”
Tags used in scoring
No QA/QC Disclosurenegative
Release does not disclose QA/QC — lab certification, CP/QP sign-off and assay protocols cannot be checked from this document.
Why it applies: qaqc_disclosed is not true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
BTPRC005Ruddygore Project: Torpy’s · zincGrade: 1.99Grade Unit: %Intercept: 23 mView all detailsHide details
Identity
- Hole ID
- BTPRC005
- Project
- Ruddygore Project: Torpy’s
- Commodity
- zinc
- Region
- australia_qld
- Reported Region
- australia_qld
- Ticker
- BMR
Geometry
- Grade
- 1.99
- Grade Unit
- %
- Intercept
- 23 m
- From
- 130 m
- To
- 153 m
- Intercept Depth
- 130 m
Classification
- Deposit Type
- sedex
- Program
- exploration
- Sample Type
- drill
- Group ID
- BTPRC005:130-153
- Mining Method
- unknown
QA/QC
- QP Signed
- Yes
Deleterious
- Deleterious Flag
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-29T00:00:00.000Z
Reasoning: The zinc grade of 1.99% over 23m is a weak result, below the project's historical average, but still contributes to the polymetallic nature of the discovery.
Positive factors
- Contributes to polymetallic nature of discovery
Negative factors
- Weak zinc grade
- Below prior project average
- Apparent width only
Evidence · text
“23m @ 215.6 g/t Ag, 8.55% Pb, 1.99% Zn from 130m”
Tags used in scoring
No QA/QC Disclosurenegative
Release does not disclose QA/QC — lab certification, CP/QP sign-off and assay protocols cannot be checked from this document.
Why it applies: qaqc_disclosed is not true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
BTPRC005Ruddygore Project: Torpy’s · silverGrade: 483.2Grade Unit: g/tIntercept: 10 mView all detailsHide details
Identity
- Hole ID
- BTPRC005
- Project
- Ruddygore Project: Torpy’s
- Commodity
- silver
- Region
- australia_qld
- Reported Region
- australia_qld
- Ticker
- BMR
Geometry
- Grade
- 483.2
- Grade Unit
- g/t
- Intercept
- 10 m
- From
- 131 m
- To
- 141 m
- Intercept Depth
- 131 m
Classification
- Deposit Type
- sedex
- Program
- exploration
- Sample Type
- drill
- Group ID
- BTPRC005:131-141
- Mining Method
- unknown
QA/QC
- QP Signed
- Yes
Deleterious
- Deleterious Flag
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-29T00:00:00.000Z
Reasoning: This sub-interval of 10m at 483.2 g/t Ag is a bonanza grade, significantly exceeding the project's historical best silver grade and highlighting the exceptional high-grade potential of the new discovery.
Positive factors
- Bonanza silver grade over significant width
- Part of new polymetallic discovery
- Significantly above prior project average and best grade
Negative factors
- Apparent width only
Evidence · text
“10m @ 483.2 g/t Ag, 19.35% Pb, 2.82% Zn & 16.5 g/t In from 131m”
Tags used in scoring
No QA/QC Disclosurenegative
Release does not disclose QA/QC — lab certification, CP/QP sign-off and assay protocols cannot be checked from this document.
Why it applies: qaqc_disclosed is not true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
BTPRC005Ruddygore Project: Torpy’s · leadGrade: 19.35Grade Unit: %Intercept: 10 mView all detailsHide details
Identity
- Hole ID
- BTPRC005
- Project
- Ruddygore Project: Torpy’s
- Commodity
- lead
- Region
- australia_qld
- Reported Region
- australia_qld
- Ticker
- BMR
Geometry
- Grade
- 19.35
- Grade Unit
- %
- Intercept
- 10 m
- From
- 131 m
- To
- 141 m
- Intercept Depth
- 131 m
Classification
- Deposit Type
- sedex
- Program
- exploration
- Sample Type
- drill
- Group ID
- BTPRC005:131-141
- Mining Method
- unknown
QA/QC
- QP Signed
- Yes
Deleterious
- Deleterious Flag
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-29T00:00:00.000Z
Reasoning: The lead grade of 19.35% over 10m is an exceptional result for the new Torpy's discovery, well above the project's historical average lead grade and near its best grade, contributing significantly to the high-grade zone.
Positive factors
- Exceptional lead grade over significant width
- Part of new polymetallic discovery
- Well above prior project average and near best grade
Negative factors
- Apparent width only
Evidence · text
“10m @ 483.2 g/t Ag, 19.35% Pb, 2.82% Zn & 16.5 g/t In from 131m”
Tags used in scoring
No QA/QC Disclosurenegative
Release does not disclose QA/QC — lab certification, CP/QP sign-off and assay protocols cannot be checked from this document.
Why it applies: qaqc_disclosed is not true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
BTPRC005Ruddygore Project: Torpy’s · zincGrade: 2.82Grade Unit: %Intercept: 10 mView all detailsHide details
Identity
- Hole ID
- BTPRC005
- Project
- Ruddygore Project: Torpy’s
- Commodity
- zinc
- Region
- australia_qld
- Reported Region
- australia_qld
- Ticker
- BMR
Geometry
- Grade
- 2.82
- Grade Unit
- %
- Intercept
- 10 m
- From
- 131 m
- To
- 141 m
- Intercept Depth
- 131 m
Classification
- Deposit Type
- sedex
- Program
- exploration
- Sample Type
- drill
- Group ID
- BTPRC005:131-141
- Mining Method
- unknown
QA/QC
- QP Signed
- Yes
Deleterious
- Deleterious Flag
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-29T00:00:00.000Z
Reasoning: The zinc grade of 2.82% over 10m is a weak result, below the project's historical average, but still contributes to the polymetallic nature of the discovery.
Positive factors
- Contributes to polymetallic nature of discovery
Negative factors
- Weak zinc grade
- Below prior project average
- Apparent width only
Evidence · text
“10m @ 483.2 g/t Ag, 19.35% Pb, 2.82% Zn & 16.5 g/t In from 131m”
Tags used in scoring
No QA/QC Disclosurenegative
Release does not disclose QA/QC — lab certification, CP/QP sign-off and assay protocols cannot be checked from this document.
Why it applies: qaqc_disclosed is not true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
BTPRC005Ruddygore Project: Torpy’s · indiumGrade: 16.5Grade Unit: g/tIntercept: 10 mView all detailsHide details
Identity
- Hole ID
- BTPRC005
- Project
- Ruddygore Project: Torpy’s
- Commodity
- indium
- Region
- australia_qld
- Reported Region
- australia_qld
- Ticker
- BMR
Geometry
- Grade
- 16.5
- Grade Unit
- g/t
- Intercept
- 10 m
- From
- 131 m
- To
- 141 m
- Intercept Depth
- 131 m
Classification
- Deposit Type
- sedex
- Program
- exploration
- Sample Type
- drill
- Group ID
- BTPRC005:131-141
- Mining Method
- unknown
QA/QC
- QP Signed
- Yes
Deleterious
- Deleterious Flag
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-29T00:00:00.000Z
Reasoning: The indium grade of 16.5 g/t over 10m is exceptional, significantly exceeding the project's historical best indium grade and adding substantial value to the new discovery.
Positive factors
- Exceptional indium grade over significant width
- Part of new polymetallic discovery
- Significantly above prior project average and best grade
Negative factors
- Apparent width only
Evidence · text
“10m @ 483.2 g/t Ag, 19.35% Pb, 2.82% Zn & 16.5 g/t In from 131m”
Tags used in scoring
No QA/QC Disclosurenegative
Release does not disclose QA/QC — lab certification, CP/QP sign-off and assay protocols cannot be checked from this document.
Why it applies: qaqc_disclosed is not true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
BTPRC005Ruddygore Project: Torpy’s · silverGrade: 650.7Grade Unit: g/tIntercept: 7 mView all detailsHide details
Identity
- Hole ID
- BTPRC005
- Project
- Ruddygore Project: Torpy’s
- Commodity
- silver
- Region
- australia_qld
- Reported Region
- australia_qld
- Ticker
- BMR
Geometry
- Grade
- 650.7
- Grade Unit
- g/t
- Intercept
- 7 m
- From
- 132 m
- To
- 139 m
- Intercept Depth
- 132 m
Classification
- Deposit Type
- sedex
- Program
- exploration
- Sample Type
- drill
- Group ID
- BTPRC005:132-139
- Mining Method
- unknown
QA/QC
- QP Signed
- Yes
Deleterious
- Deleterious Flag
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-29T00:00:00.000Z
Reasoning: This sub-interval of 7m at 650.7 g/t Ag is an exceptional bonanza grade, significantly exceeding the project's historical best silver grade and representing a major highlight of the new discovery.
Positive factors
- Bonanza silver grade over strong width
- Part of new polymetallic discovery
- Significantly above prior project average and best grade
Negative factors
- Apparent width only
Evidence · text
“7m @ 650.7 g/t Ag, 25.37% Pb, 3.01% Zn & 14.2 g/t In from 132m”
Tags used in scoring
No QA/QC Disclosurenegative
Release does not disclose QA/QC — lab certification, CP/QP sign-off and assay protocols cannot be checked from this document.
Why it applies: qaqc_disclosed is not true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
BTPRC005Ruddygore Project: Torpy’s · leadGrade: 25.37Grade Unit: %Intercept: 7 mView all detailsHide details
Identity
- Hole ID
- BTPRC005
- Project
- Ruddygore Project: Torpy’s
- Commodity
- lead
- Region
- australia_qld
- Reported Region
- australia_qld
- Ticker
- BMR
Geometry
- Grade
- 25.37
- Grade Unit
- %
- Intercept
- 7 m
- From
- 132 m
- To
- 139 m
- Intercept Depth
- 132 m
Classification
- Deposit Type
- sedex
- Program
- exploration
- Sample Type
- drill
- Group ID
- BTPRC005:132-139
- Mining Method
- unknown
QA/QC
- QP Signed
- Yes
Deleterious
- Deleterious Flag
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-29T00:00:00.000Z
Reasoning: The lead grade of 25.37% over 7m is an exceptional result for the new Torpy's discovery, very close to the project's historical best lead grade and contributing significantly to the high-grade zone.
Positive factors
- Exceptional lead grade over strong width
- Part of new polymetallic discovery
- Near prior project best grade
Negative factors
- Apparent width only
Evidence · text
“7m @ 650.7 g/t Ag, 25.37% Pb, 3.01% Zn & 14.2 g/t In from 132m”
Tags used in scoring
No QA/QC Disclosurenegative
Release does not disclose QA/QC — lab certification, CP/QP sign-off and assay protocols cannot be checked from this document.
Why it applies: qaqc_disclosed is not true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
BTPRC005Ruddygore Project: Torpy’s · zincGrade: 3.01Grade Unit: %Intercept: 7 mView all detailsHide details
Identity
- Hole ID
- BTPRC005
- Project
- Ruddygore Project: Torpy’s
- Commodity
- zinc
- Region
- australia_qld
- Reported Region
- australia_qld
- Ticker
- BMR
Geometry
- Grade
- 3.01
- Grade Unit
- %
- Intercept
- 7 m
- From
- 132 m
- To
- 139 m
- Intercept Depth
- 132 m
Classification
- Deposit Type
- sedex
- Program
- exploration
- Sample Type
- drill
- Group ID
- BTPRC005:132-139
- Mining Method
- unknown
QA/QC
- QP Signed
- Yes
Deleterious
- Deleterious Flag
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-29T00:00:00.000Z
Reasoning: The zinc grade of 3.01% over 7m is a weak result, below the project's historical average, but still contributes to the polymetallic nature of the discovery.
Positive factors
- Contributes to polymetallic nature of discovery
Negative factors
- Weak zinc grade
- Below prior project average
- Apparent width only
Evidence · text
“7m @ 650.7 g/t Ag, 25.37% Pb, 3.01% Zn & 14.2 g/t In from 132m”
Tags used in scoring
No QA/QC Disclosurenegative
Release does not disclose QA/QC — lab certification, CP/QP sign-off and assay protocols cannot be checked from this document.
Why it applies: qaqc_disclosed is not true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
BTPRC005Ruddygore Project: Torpy’s · indiumGrade: 14.2Grade Unit: g/tIntercept: 7 mView all detailsHide details
Identity
- Hole ID
- BTPRC005
- Project
- Ruddygore Project: Torpy’s
- Commodity
- indium
- Region
- australia_qld
- Reported Region
- australia_qld
- Ticker
- BMR
Geometry
- Grade
- 14.2
- Grade Unit
- g/t
- Intercept
- 7 m
- From
- 132 m
- To
- 139 m
- Intercept Depth
- 132 m
Classification
- Deposit Type
- sedex
- Program
- exploration
- Sample Type
- drill
- Group ID
- BTPRC005:132-139
- Mining Method
- unknown
QA/QC
- QP Signed
- Yes
Deleterious
- Deleterious Flag
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-29T00:00:00.000Z
Reasoning: The indium grade of 14.2 g/t over 7m is exceptional, significantly exceeding the project's historical best indium grade and adding substantial value to the new discovery.
Positive factors
- Exceptional indium grade over strong width
- Part of new polymetallic discovery
- Significantly above prior project average and best grade
Negative factors
- Apparent width only
Evidence · text
“7m @ 650.7 g/t Ag, 25.37% Pb, 3.01% Zn & 14.2 g/t In from 132m”
Tags used in scoring
No QA/QC Disclosurenegative
Release does not disclose QA/QC — lab certification, CP/QP sign-off and assay protocols cannot be checked from this document.
Why it applies: qaqc_disclosed is not true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
BTPRC007Ruddygore Project: Little Torpy’s · silverGrade: 58.4Grade Unit: g/tIntercept: 30 mView all detailsHide details
Identity
- Hole ID
- BTPRC007
- Project
- Ruddygore Project: Little Torpy’s
- Commodity
- silver
- Region
- australia_qld
- Reported Region
- australia_qld
- Ticker
- BMR
Geometry
- Grade
- 58.4
- Grade Unit
- g/t
- Intercept
- 30 m
- From
- 22 m
- To
- 52 m
- Intercept Depth
- 22 m
Classification
- Deposit Type
- sedex
- Program
- exploration
- Sample Type
- drill
- Group ID
- BTPRC007:22-52
- Mining Method
- unknown
QA/QC
- QP Signed
- Yes
Deleterious
- Deleterious Flag
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-29T00:00:00.000Z
Reasoning: This intercept of 30m at 58.4 g/t Ag is a moderate result, significant for its width and for demonstrating the extension of mineralization beyond the main Torpy's workings to Little Torpy's.
Positive factors
- Moderate silver grade over significant width
- Extends mineralization beyond main workings
Negative factors
- Below prior project average
- Apparent width only
Evidence · text
“30m @ 58.4 g/t Ag, 4.29% Pb & 3.70% Zn from 22m”
Tags used in scoring
No QA/QC Disclosurenegative
Release does not disclose QA/QC — lab certification, CP/QP sign-off and assay protocols cannot be checked from this document.
Why it applies: qaqc_disclosed is not true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
BTPRC007Ruddygore Project: Little Torpy’s · leadGrade: 4.29Grade Unit: %Intercept: 30 mView all detailsHide details
Identity
- Hole ID
- BTPRC007
- Project
- Ruddygore Project: Little Torpy’s
- Commodity
- lead
- Region
- australia_qld
- Reported Region
- australia_qld
- Ticker
- BMR
Geometry
- Grade
- 4.29
- Grade Unit
- %
- Intercept
- 30 m
- From
- 22 m
- To
- 52 m
- Intercept Depth
- 22 m
Classification
- Deposit Type
- sedex
- Program
- exploration
- Sample Type
- drill
- Group ID
- BTPRC007:22-52
- Mining Method
- unknown
QA/QC
- QP Signed
- Yes
Deleterious
- Deleterious Flag
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-29T00:00:00.000Z
Reasoning: The lead grade of 4.29% over 30m is a moderate result, significant for its width and for demonstrating the extension of mineralization beyond the main Torpy's workings to Little Torpy's.
Positive factors
- Moderate lead grade over significant width
- Extends mineralization beyond main workings
Negative factors
- Below prior project average
- Apparent width only
Evidence · text
“30m @ 58.4 g/t Ag, 4.29% Pb & 3.70% Zn from 22m”
Tags used in scoring
No QA/QC Disclosurenegative
Release does not disclose QA/QC — lab certification, CP/QP sign-off and assay protocols cannot be checked from this document.
Why it applies: qaqc_disclosed is not true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
BTPRC007Ruddygore Project: Little Torpy’s · zincGrade: 3.7Grade Unit: %Intercept: 30 mView all detailsHide details
Identity
- Hole ID
- BTPRC007
- Project
- Ruddygore Project: Little Torpy’s
- Commodity
- zinc
- Region
- australia_qld
- Reported Region
- australia_qld
- Ticker
- BMR
Geometry
- Grade
- 3.7
- Grade Unit
- %
- Intercept
- 30 m
- From
- 22 m
- To
- 52 m
- Intercept Depth
- 22 m
Classification
- Deposit Type
- sedex
- Program
- exploration
- Sample Type
- drill
- Group ID
- BTPRC007:22-52
- Mining Method
- unknown
QA/QC
- QP Signed
- Yes
Deleterious
- Deleterious Flag
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-29T00:00:00.000Z
Reasoning: The zinc grade of 3.70% over 30m is a moderate result, significant for its width and for demonstrating the extension of mineralization beyond the main Torpy's workings to Little Torpy's.
Positive factors
- Moderate zinc grade over significant width
- Extends mineralization beyond main workings
Negative factors
- Below prior project average
- Apparent width only
Evidence · text
“30m @ 58.4 g/t Ag, 4.29% Pb & 3.70% Zn from 22m”
Tags used in scoring
No QA/QC Disclosurenegative
Release does not disclose QA/QC — lab certification, CP/QP sign-off and assay protocols cannot be checked from this document.
Why it applies: qaqc_disclosed is not true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
BTPRC007Ruddygore Project: Little Torpy’s · silverGrade: 65.6Grade Unit: g/tIntercept: 7 mView all detailsHide details
Identity
- Hole ID
- BTPRC007
- Project
- Ruddygore Project: Little Torpy’s
- Commodity
- silver
- Region
- australia_qld
- Reported Region
- australia_qld
- Ticker
- BMR
Geometry
- Grade
- 65.6
- Grade Unit
- g/t
- Intercept
- 7 m
- From
- 23 m
- To
- 30 m
- Intercept Depth
- 23 m
Classification
- Deposit Type
- sedex
- Program
- exploration
- Sample Type
- drill
- Group ID
- BTPRC007:23-30
- Mining Method
- unknown
QA/QC
- QP Signed
- Yes
Deleterious
- Deleterious Flag
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-29T00:00:00.000Z
Reasoning: This sub-interval of 7m at 65.6 g/t Ag is a moderate result, contributing to the overall mineralization at Little Torpy's.
Positive factors
- Moderate silver grade
- Extends mineralization beyond main workings
Negative factors
- Below prior project average
- Apparent width only
Evidence · text
“7m @ 65.6 g/t Ag, 5.90% Pb & 4.78% Zn from 23m”
Tags used in scoring
No QA/QC Disclosurenegative
Release does not disclose QA/QC — lab certification, CP/QP sign-off and assay protocols cannot be checked from this document.
Why it applies: qaqc_disclosed is not true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
BTPRC007Ruddygore Project: Little Torpy’s · leadGrade: 5.9Grade Unit: %Intercept: 7 mView all detailsHide details
Identity
- Hole ID
- BTPRC007
- Project
- Ruddygore Project: Little Torpy’s
- Commodity
- lead
- Region
- australia_qld
- Reported Region
- australia_qld
- Ticker
- BMR
Geometry
- Grade
- 5.9
- Grade Unit
- %
- Intercept
- 7 m
- From
- 23 m
- To
- 30 m
- Intercept Depth
- 23 m
Classification
- Deposit Type
- sedex
- Program
- exploration
- Sample Type
- drill
- Group ID
- BTPRC007:23-30
- Mining Method
- unknown
QA/QC
- QP Signed
- Yes
Deleterious
- Deleterious Flag
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-29T00:00:00.000Z
Reasoning: The lead grade of 5.90% over 7m is a moderate result, contributing to the overall mineralization at Little Torpy's.
Positive factors
- Moderate lead grade
- Extends mineralization beyond main workings
Negative factors
- Below prior project average
- Apparent width only
Evidence · text
“7m @ 65.6 g/t Ag, 5.90% Pb & 4.78% Zn from 23m”
Tags used in scoring
No QA/QC Disclosurenegative
Release does not disclose QA/QC — lab certification, CP/QP sign-off and assay protocols cannot be checked from this document.
Why it applies: qaqc_disclosed is not true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
BTPRC007Ruddygore Project: Little Torpy’s · zincGrade: 4.78Grade Unit: %Intercept: 7 mView all detailsHide details
Identity
- Hole ID
- BTPRC007
- Project
- Ruddygore Project: Little Torpy’s
- Commodity
- zinc
- Region
- australia_qld
- Reported Region
- australia_qld
- Ticker
- BMR
Geometry
- Grade
- 4.78
- Grade Unit
- %
- Intercept
- 7 m
- From
- 23 m
- To
- 30 m
- Intercept Depth
- 23 m
Classification
- Deposit Type
- sedex
- Program
- exploration
- Sample Type
- drill
- Group ID
- BTPRC007:23-30
- Mining Method
- unknown
QA/QC
- QP Signed
- Yes
Deleterious
- Deleterious Flag
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-29T00:00:00.000Z
Reasoning: The zinc grade of 4.78% over 7m is a moderate result, contributing to the overall mineralization at Little Torpy's.
Positive factors
- Moderate zinc grade
- Extends mineralization beyond main workings
Negative factors
- Below prior project average
- Apparent width only
Evidence · text
“7m @ 65.6 g/t Ag, 5.90% Pb & 4.78% Zn from 23m”
Tags used in scoring
No QA/QC Disclosurenegative
Release does not disclose QA/QC — lab certification, CP/QP sign-off and assay protocols cannot be checked from this document.
Why it applies: qaqc_disclosed is not true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
BTPRC007Ruddygore Project: Little Torpy’s · silverGrade: 153Grade Unit: g/tIntercept: 6 mView all detailsHide details
Identity
- Hole ID
- BTPRC007
- Project
- Ruddygore Project: Little Torpy’s
- Commodity
- silver
- Region
- australia_qld
- Reported Region
- australia_qld
- Ticker
- BMR
Geometry
- Grade
- 153
- Grade Unit
- g/t
- Intercept
- 6 m
- From
- 41 m
- To
- 47 m
- Intercept Depth
- 41 m
Classification
- Deposit Type
- sedex
- Program
- exploration
- Sample Type
- drill
- Group ID
- BTPRC007:41-47
- Mining Method
- unknown
QA/QC
- QP Signed
- Yes
Deleterious
- Deleterious Flag
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-29T00:00:00.000Z
Reasoning: This sub-interval of 6m at 153.0 g/t Ag is a strong result, above the project's historical average silver grade, further demonstrating the extension of mineralization at Little Torpy's.
Positive factors
- High-grade silver intercept
- Extends mineralization beyond main workings
- Above prior project average
Negative factors
- Apparent width only
Evidence · text
“6m @ 153.0 g/t Ag, 10.24% Pb & 8.56% Zn from 41m”
Tags used in scoring
No QA/QC Disclosurenegative
Release does not disclose QA/QC — lab certification, CP/QP sign-off and assay protocols cannot be checked from this document.
Why it applies: qaqc_disclosed is not true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
BTPRC007Ruddygore Project: Little Torpy’s · leadGrade: 10.24Grade Unit: %Intercept: 6 mView all detailsHide details
Identity
- Hole ID
- BTPRC007
- Project
- Ruddygore Project: Little Torpy’s
- Commodity
- lead
- Region
- australia_qld
- Reported Region
- australia_qld
- Ticker
- BMR
Geometry
- Grade
- 10.24
- Grade Unit
- %
- Intercept
- 6 m
- From
- 41 m
- To
- 47 m
- Intercept Depth
- 41 m
Classification
- Deposit Type
- sedex
- Program
- exploration
- Sample Type
- drill
- Group ID
- BTPRC007:41-47
- Mining Method
- unknown
QA/QC
- QP Signed
- Yes
Deleterious
- Deleterious Flag
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-29T00:00:00.000Z
Reasoning: The lead grade of 10.24% over 6m is a very strong result, well above the project's historical average lead grade, further demonstrating the extension of mineralization at Little Torpy's.
Positive factors
- Very strong lead grade
- Extends mineralization beyond main workings
- Above prior project average
Negative factors
- Apparent width only
Evidence · text
“6m @ 153.0 g/t Ag, 10.24% Pb & 8.56% Zn from 41m”
Tags used in scoring
No QA/QC Disclosurenegative
Release does not disclose QA/QC — lab certification, CP/QP sign-off and assay protocols cannot be checked from this document.
Why it applies: qaqc_disclosed is not true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
BTPRC007Ruddygore Project: Little Torpy’s · zincGrade: 8.56Grade Unit: %Intercept: 6 mView all detailsHide details
Identity
- Hole ID
- BTPRC007
- Project
- Ruddygore Project: Little Torpy’s
- Commodity
- zinc
- Region
- australia_qld
- Reported Region
- australia_qld
- Ticker
- BMR
Geometry
- Grade
- 8.56
- Grade Unit
- %
- Intercept
- 6 m
- From
- 41 m
- To
- 47 m
- Intercept Depth
- 41 m
Classification
- Deposit Type
- sedex
- Program
- exploration
- Sample Type
- drill
- Group ID
- BTPRC007:41-47
- Mining Method
- unknown
QA/QC
- QP Signed
- Yes
Deleterious
- Deleterious Flag
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-29T00:00:00.000Z
Reasoning: The zinc grade of 8.56% over 6m is a very strong result, well above the project's historical average zinc grade, further demonstrating the extension of mineralization at Little Torpy's.
Positive factors
- Very strong zinc grade
- Extends mineralization beyond main workings
- Above prior project average
Negative factors
- Apparent width only
Evidence · text
“6m @ 153.0 g/t Ag, 10.24% Pb & 8.56% Zn from 41m”
Tags used in scoring
No QA/QC Disclosurenegative
Release does not disclose QA/QC — lab certification, CP/QP sign-off and assay protocols cannot be checked from this document.
Why it applies: qaqc_disclosed is not true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
BTPRC007Ruddygore Project: Little Torpy’s · silverGrade: 293Grade Unit: g/tIntercept: 1 mView all detailsHide details
Identity
- Hole ID
- BTPRC007
- Project
- Ruddygore Project: Little Torpy’s
- Commodity
- silver
- Region
- australia_qld
- Reported Region
- australia_qld
- Ticker
- BMR
Geometry
- Grade
- 293
- Grade Unit
- g/t
- Intercept
- 1 m
- From
- 45 m
- To
- 46 m
- Intercept Depth
- 45 m
Classification
- Deposit Type
- sedex
- Program
- exploration
- Sample Type
- drill
- Group ID
- BTPRC007:45-46
- Mining Method
- unknown
QA/QC
- QP Signed
- Yes
Deleterious
- Deleterious Flag
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-29T00:00:00.000Z
Reasoning: This sub-interval of 1m at 293.0 g/t Ag is a bonanza grade, significantly exceeding the project's historical best silver grade, highlighting the high-grade potential at Little Torpy's.
Positive factors
- Bonanza silver grade
- Extends mineralization beyond main workings
- Significantly above prior project average and best grade
Negative factors
- Very narrow intercept length
- Apparent width only
Evidence · text
“1m @ 293.0 g/t Ag, 19.96% Pb & 9.36% Zn from 45m”
Tags used in scoring
No QA/QC Disclosurenegative
Release does not disclose QA/QC — lab certification, CP/QP sign-off and assay protocols cannot be checked from this document.
Why it applies: qaqc_disclosed is not true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
BTPRC007Ruddygore Project: Little Torpy’s · leadGrade: 19.96Grade Unit: %Intercept: 1 mView all detailsHide details
Identity
- Hole ID
- BTPRC007
- Project
- Ruddygore Project: Little Torpy’s
- Commodity
- lead
- Region
- australia_qld
- Reported Region
- australia_qld
- Ticker
- BMR
Geometry
- Grade
- 19.96
- Grade Unit
- %
- Intercept
- 1 m
- From
- 45 m
- To
- 46 m
- Intercept Depth
- 45 m
Classification
- Deposit Type
- sedex
- Program
- exploration
- Sample Type
- drill
- Group ID
- BTPRC007:45-46
- Mining Method
- unknown
QA/QC
- QP Signed
- Yes
Deleterious
- Deleterious Flag
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-29T00:00:00.000Z
Reasoning: The lead grade of 19.96% over 1m is an exceptional result, very close to the project's historical best lead grade, further highlighting the high-grade potential at Little Torpy's.
Positive factors
- Exceptional lead grade
- Extends mineralization beyond main workings
- Well above prior project average and near best grade
Negative factors
- Very narrow intercept length
- Apparent width only
Evidence · text
“1m @ 293.0 g/t Ag, 19.96% Pb & 9.36% Zn from 45m”
Tags used in scoring
No QA/QC Disclosurenegative
Release does not disclose QA/QC — lab certification, CP/QP sign-off and assay protocols cannot be checked from this document.
Why it applies: qaqc_disclosed is not true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
BTPRC007Ruddygore Project: Little Torpy’s · zincGrade: 9.36Grade Unit: %Intercept: 1 mView all detailsHide details
Identity
- Hole ID
- BTPRC007
- Project
- Ruddygore Project: Little Torpy’s
- Commodity
- zinc
- Region
- australia_qld
- Reported Region
- australia_qld
- Ticker
- BMR
Geometry
- Grade
- 9.36
- Grade Unit
- %
- Intercept
- 1 m
- From
- 45 m
- To
- 46 m
- Intercept Depth
- 45 m
Classification
- Deposit Type
- sedex
- Program
- exploration
- Sample Type
- drill
- Group ID
- BTPRC007:45-46
- Mining Method
- unknown
QA/QC
- QP Signed
- Yes
Deleterious
- Deleterious Flag
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-29T00:00:00.000Z
Reasoning: The zinc grade of 9.36% over 1m is a very strong result, well above the project's historical average zinc grade, further highlighting the high-grade potential at Little Torpy's.
Positive factors
- Very strong zinc grade
- Extends mineralization beyond main workings
- Above prior project average
Negative factors
- Very narrow intercept length
- Apparent width only
Evidence · text
“1m @ 293.0 g/t Ag, 19.96% Pb & 9.36% Zn from 45m”
Tags used in scoring
No QA/QC Disclosurenegative
Release does not disclose QA/QC — lab certification, CP/QP sign-off and assay protocols cannot be checked from this document.
Why it applies: qaqc_disclosed is not true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
BTPRC010Ruddygore Project: Torpy’s · silverGrade: 76.6Grade Unit: g/tIntercept: 14 mView all detailsHide details
Identity
- Hole ID
- BTPRC010
- Project
- Ruddygore Project: Torpy’s
- Commodity
- silver
- Region
- australia_qld
- Reported Region
- australia_qld
- Ticker
- BMR
Geometry
- Grade
- 76.6
- Grade Unit
- g/t
- Intercept
- 14 m
- From
- 76 m
- To
- 90 m
- Intercept Depth
- 76 m
Classification
- Deposit Type
- sedex
- Program
- exploration
- Sample Type
- drill
- Group ID
- BTPRC010:76-90
- Mining Method
- unknown
QA/QC
- QP Signed
- Yes
Deleterious
- Deleterious Flag
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-29T00:00:00.000Z
Reasoning: This intercept of 14m at 76.6 g/t Ag is a moderate result, confirming mineralization continuity at Torpy's over a good width.
Positive factors
- Moderate silver grade over good width
- Confirms mineralization continuity
Negative factors
- Below prior project average
- Apparent width only
Evidence · text
“14m @ 76.6 g/t Ag, 3.43% Pb, 2.32% Zn and 3.7 g/t In from 76m”
Tags used in scoring
No QA/QC Disclosurenegative
Release does not disclose QA/QC — lab certification, CP/QP sign-off and assay protocols cannot be checked from this document.
Why it applies: qaqc_disclosed is not true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
BTPRC010Ruddygore Project: Torpy’s · leadGrade: 3.43Grade Unit: %Intercept: 14 mView all detailsHide details
Identity
- Hole ID
- BTPRC010
- Project
- Ruddygore Project: Torpy’s
- Commodity
- lead
- Region
- australia_qld
- Reported Region
- australia_qld
- Ticker
- BMR
Geometry
- Grade
- 3.43
- Grade Unit
- %
- Intercept
- 14 m
- From
- 76 m
- To
- 90 m
- Intercept Depth
- 76 m
Classification
- Deposit Type
- sedex
- Program
- exploration
- Sample Type
- drill
- Group ID
- BTPRC010:76-90
- Mining Method
- unknown
QA/QC
- QP Signed
- Yes
Deleterious
- Deleterious Flag
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-29T00:00:00.000Z
Reasoning: The lead grade of 3.43% over 14m is a moderate result, confirming mineralization continuity at Torpy's over a good width.
Positive factors
- Moderate lead grade over good width
- Confirms mineralization continuity
Negative factors
- Below prior project average
- Apparent width only
Evidence · text
“14m @ 76.6 g/t Ag, 3.43% Pb, 2.32% Zn and 3.7 g/t In from 76m”
Tags used in scoring
No QA/QC Disclosurenegative
Release does not disclose QA/QC — lab certification, CP/QP sign-off and assay protocols cannot be checked from this document.
Why it applies: qaqc_disclosed is not true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
BTPRC010Ruddygore Project: Torpy’s · zincGrade: 2.32Grade Unit: %Intercept: 14 mView all detailsHide details
Identity
- Hole ID
- BTPRC010
- Project
- Ruddygore Project: Torpy’s
- Commodity
- zinc
- Region
- australia_qld
- Reported Region
- australia_qld
- Ticker
- BMR
Geometry
- Grade
- 2.32
- Grade Unit
- %
- Intercept
- 14 m
- From
- 76 m
- To
- 90 m
- Intercept Depth
- 76 m
Classification
- Deposit Type
- sedex
- Program
- exploration
- Sample Type
- drill
- Group ID
- BTPRC010:76-90
- Mining Method
- unknown
QA/QC
- QP Signed
- Yes
Deleterious
- Deleterious Flag
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-29T00:00:00.000Z
Reasoning: The zinc grade of 2.32% over 14m is a weak result, below the project's historical average, but still contributes to the polymetallic nature of the mineralization.
Positive factors
- Contributes to polymetallic nature of mineralization
Negative factors
- Weak zinc grade
- Below prior project average
- Apparent width only
Evidence · text
“14m @ 76.6 g/t Ag, 3.43% Pb, 2.32% Zn and 3.7 g/t In from 76m”
Tags used in scoring
No QA/QC Disclosurenegative
Release does not disclose QA/QC — lab certification, CP/QP sign-off and assay protocols cannot be checked from this document.
Why it applies: qaqc_disclosed is not true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
BTPRC010Ruddygore Project: Torpy’s · indiumGrade: 3.7Grade Unit: g/tIntercept: 14 mView all detailsHide details
Identity
- Hole ID
- BTPRC010
- Project
- Ruddygore Project: Torpy’s
- Commodity
- indium
- Region
- australia_qld
- Reported Region
- australia_qld
- Ticker
- BMR
Geometry
- Grade
- 3.7
- Grade Unit
- g/t
- Intercept
- 14 m
- From
- 76 m
- To
- 90 m
- Intercept Depth
- 76 m
Classification
- Deposit Type
- sedex
- Program
- exploration
- Sample Type
- drill
- Group ID
- BTPRC010:76-90
- Mining Method
- unknown
QA/QC
- QP Signed
- Yes
Deleterious
- Deleterious Flag
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-29T00:00:00.000Z
Reasoning: The indium grade of 3.7 g/t over 14m is a moderate result, below the project's historical average, but confirms mineralization continuity.
Positive factors
- Moderate indium grade
- Confirms mineralization continuity
Negative factors
- Below prior project average
- Apparent width only
Evidence · text
“14m @ 76.6 g/t Ag, 3.43% Pb, 2.32% Zn and 3.7 g/t In from 76m”
Tags used in scoring
No QA/QC Disclosurenegative
Release does not disclose QA/QC — lab certification, CP/QP sign-off and assay protocols cannot be checked from this document.
Why it applies: qaqc_disclosed is not true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
BTPRC010Ruddygore Project: Torpy’s · silverGrade: 117.2Grade Unit: g/tIntercept: 9 mView all detailsHide details
Identity
- Hole ID
- BTPRC010
- Project
- Ruddygore Project: Torpy’s
- Commodity
- silver
- Region
- australia_qld
- Reported Region
- australia_qld
- Ticker
- BMR
Geometry
- Grade
- 117.2
- Grade Unit
- g/t
- Intercept
- 9 m
- From
- 79 m
- To
- 88 m
- Intercept Depth
- 79 m
Classification
- Deposit Type
- sedex
- Program
- exploration
- Sample Type
- drill
- Group ID
- BTPRC010:79-88
- Mining Method
- unknown
QA/QC
- QP Signed
- Yes
Deleterious
- Deleterious Flag
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-29T00:00:00.000Z
Reasoning: This sub-interval of 9m at 117.2 g/t Ag is a strong result, confirming the presence of high-grade shoots within the broader mineralized zone.
Positive factors
- High-grade silver sub-interval
- Confirms high-grade shoots
Negative factors
- Below prior project average
- Apparent width only
Evidence · text
“9m @ 117.2 g/t Ag, 5.26% Pb, 3.54% Zn and 5.6 g/t In from 79m”
Tags used in scoring
No QA/QC Disclosurenegative
Release does not disclose QA/QC — lab certification, CP/QP sign-off and assay protocols cannot be checked from this document.
Why it applies: qaqc_disclosed is not true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
BTPRC010Ruddygore Project: Torpy’s · leadGrade: 5.26Grade Unit: %Intercept: 9 mView all detailsHide details
Identity
- Hole ID
- BTPRC010
- Project
- Ruddygore Project: Torpy’s
- Commodity
- lead
- Region
- australia_qld
- Reported Region
- australia_qld
- Ticker
- BMR
Geometry
- Grade
- 5.26
- Grade Unit
- %
- Intercept
- 9 m
- From
- 79 m
- To
- 88 m
- Intercept Depth
- 79 m
Classification
- Deposit Type
- sedex
- Program
- exploration
- Sample Type
- drill
- Group ID
- BTPRC010:79-88
- Mining Method
- unknown
QA/QC
- QP Signed
- Yes
Deleterious
- Deleterious Flag
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-29T00:00:00.000Z
Reasoning: The lead grade of 5.26% over 9m is a moderate result, confirming the presence of high-grade shoots within the broader mineralized zone.
Positive factors
- Moderate lead grade
- Confirms high-grade shoots
Negative factors
- Below prior project average
- Apparent width only
Evidence · text
“9m @ 117.2 g/t Ag, 5.26% Pb, 3.54% Zn and 5.6 g/t In from 79m”
Tags used in scoring
No QA/QC Disclosurenegative
Release does not disclose QA/QC — lab certification, CP/QP sign-off and assay protocols cannot be checked from this document.
Why it applies: qaqc_disclosed is not true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
BTPRC010Ruddygore Project: Torpy’s · zincGrade: 3.54Grade Unit: %Intercept: 9 mView all detailsHide details
Identity
- Hole ID
- BTPRC010
- Project
- Ruddygore Project: Torpy’s
- Commodity
- zinc
- Region
- australia_qld
- Reported Region
- australia_qld
- Ticker
- BMR
Geometry
- Grade
- 3.54
- Grade Unit
- %
- Intercept
- 9 m
- From
- 79 m
- To
- 88 m
- Intercept Depth
- 79 m
Classification
- Deposit Type
- sedex
- Program
- exploration
- Sample Type
- drill
- Group ID
- BTPRC010:79-88
- Mining Method
- unknown
QA/QC
- QP Signed
- Yes
Deleterious
- Deleterious Flag
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-29T00:00:00.000Z
Reasoning: The zinc grade of 3.54% over 9m is a moderate result, confirming the presence of high-grade shoots within the broader mineralized zone.
Positive factors
- Moderate zinc grade
- Confirms high-grade shoots
Negative factors
- Below prior project average
- Apparent width only
Evidence · text
“9m @ 117.2 g/t Ag, 5.26% Pb, 3.54% Zn and 5.6 g/t In from 79m”
Tags used in scoring
No QA/QC Disclosurenegative
Release does not disclose QA/QC — lab certification, CP/QP sign-off and assay protocols cannot be checked from this document.
Why it applies: qaqc_disclosed is not true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
BTPRC010Ruddygore Project: Torpy’s · indiumGrade: 5.6Grade Unit: g/tIntercept: 9 mView all detailsHide details
Identity
- Hole ID
- BTPRC010
- Project
- Ruddygore Project: Torpy’s
- Commodity
- indium
- Region
- australia_qld
- Reported Region
- australia_qld
- Ticker
- BMR
Geometry
- Grade
- 5.6
- Grade Unit
- g/t
- Intercept
- 9 m
- From
- 79 m
- To
- 88 m
- Intercept Depth
- 79 m
Classification
- Deposit Type
- sedex
- Program
- exploration
- Sample Type
- drill
- Group ID
- BTPRC010:79-88
- Mining Method
- unknown
QA/QC
- QP Signed
- Yes
Deleterious
- Deleterious Flag
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-29T00:00:00.000Z
Reasoning: The indium grade of 5.6 g/t over 9m is a moderate result, confirming the presence of high-grade shoots within the broader mineralized zone.
Positive factors
- Moderate indium grade
- Confirms high-grade shoots
Negative factors
- Below prior project average
- Apparent width only
Evidence · text
“9m @ 117.2 g/t Ag, 5.26% Pb, 3.54% Zn and 5.6 g/t In from 79m”
Tags used in scoring
No QA/QC Disclosurenegative
Release does not disclose QA/QC — lab certification, CP/QP sign-off and assay protocols cannot be checked from this document.
Why it applies: qaqc_disclosed is not true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
BTPRC010Ruddygore Project: Torpy’s · silverGrade: 249.6Grade Unit: g/tIntercept: 3 mView all detailsHide details
Identity
- Hole ID
- BTPRC010
- Project
- Ruddygore Project: Torpy’s
- Commodity
- silver
- Region
- australia_qld
- Reported Region
- australia_qld
- Ticker
- BMR
Geometry
- Grade
- 249.6
- Grade Unit
- g/t
- Intercept
- 3 m
- From
- 79 m
- To
- 82 m
- Intercept Depth
- 79 m
Classification
- Deposit Type
- sedex
- Program
- exploration
- Sample Type
- drill
- Group ID
- BTPRC010:79-82
- Mining Method
- unknown
QA/QC
- QP Signed
- Yes
Deleterious
- Deleterious Flag
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-29T00:00:00.000Z
Reasoning: This sub-interval of 3m at 249.6 g/t Ag is a bonanza grade, significantly exceeding the project's historical best silver grade and highlighting the high-grade potential of the shoots.
Positive factors
- Bonanza silver grade
- Confirms high-grade shoots
- Significantly above prior project average and best grade
Negative factors
- Apparent width only
Evidence · text
“3m @ 249.6 g/t Ag, 12.19% Pb, 6.05% Zn and 8.3 g/t In from 79m”
Tags used in scoring
No QA/QC Disclosurenegative
Release does not disclose QA/QC — lab certification, CP/QP sign-off and assay protocols cannot be checked from this document.
Why it applies: qaqc_disclosed is not true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
BTPRC010Ruddygore Project: Torpy’s · leadGrade: 12.19Grade Unit: %Intercept: 3 mView all detailsHide details
Identity
- Hole ID
- BTPRC010
- Project
- Ruddygore Project: Torpy’s
- Commodity
- lead
- Region
- australia_qld
- Reported Region
- australia_qld
- Ticker
- BMR
Geometry
- Grade
- 12.19
- Grade Unit
- %
- Intercept
- 3 m
- From
- 79 m
- To
- 82 m
- Intercept Depth
- 79 m
Classification
- Deposit Type
- sedex
- Program
- exploration
- Sample Type
- drill
- Group ID
- BTPRC010:79-82
- Mining Method
- unknown
QA/QC
- QP Signed
- Yes
Deleterious
- Deleterious Flag
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-29T00:00:00.000Z
Reasoning: The lead grade of 12.19% over 3m is a very strong result, well above the project's historical average lead grade, confirming the high-grade potential of the shoots.
Positive factors
- Very strong lead grade
- Confirms high-grade shoots
- Well above prior project average
Negative factors
- Apparent width only
Evidence · text
“3m @ 249.6 g/t Ag, 12.19% Pb, 6.05% Zn and 8.3 g/t In from 79m”
Tags used in scoring
No QA/QC Disclosurenegative
Release does not disclose QA/QC — lab certification, CP/QP sign-off and assay protocols cannot be checked from this document.
Why it applies: qaqc_disclosed is not true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
BTPRC010Ruddygore Project: Torpy’s · zincGrade: 6.05Grade Unit: %Intercept: 3 mView all detailsHide details
Identity
- Hole ID
- BTPRC010
- Project
- Ruddygore Project: Torpy’s
- Commodity
- zinc
- Region
- australia_qld
- Reported Region
- australia_qld
- Ticker
- BMR
Geometry
- Grade
- 6.05
- Grade Unit
- %
- Intercept
- 3 m
- From
- 79 m
- To
- 82 m
- Intercept Depth
- 79 m
Classification
- Deposit Type
- sedex
- Program
- exploration
- Sample Type
- drill
- Group ID
- BTPRC010:79-82
- Mining Method
- unknown
QA/QC
- QP Signed
- Yes
Deleterious
- Deleterious Flag
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-29T00:00:00.000Z
Reasoning: The zinc grade of 6.05% over 3m is a strong result, above the project's historical average zinc grade, confirming the high-grade potential of the shoots.
Positive factors
- Strong zinc grade
- Confirms high-grade shoots
- Above prior project average
Negative factors
- Apparent width only
Evidence · text
“3m @ 249.6 g/t Ag, 12.19% Pb, 6.05% Zn and 8.3 g/t In from 79m”
Tags used in scoring
No QA/QC Disclosurenegative
Release does not disclose QA/QC — lab certification, CP/QP sign-off and assay protocols cannot be checked from this document.
Why it applies: qaqc_disclosed is not true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
BTPRC010Ruddygore Project: Torpy’s · indiumGrade: 8.3Grade Unit: g/tIntercept: 3 mView all detailsHide details
Identity
- Hole ID
- BTPRC010
- Project
- Ruddygore Project: Torpy’s
- Commodity
- indium
- Region
- australia_qld
- Reported Region
- australia_qld
- Ticker
- BMR
Geometry
- Grade
- 8.3
- Grade Unit
- g/t
- Intercept
- 3 m
- From
- 79 m
- To
- 82 m
- Intercept Depth
- 79 m
Classification
- Deposit Type
- sedex
- Program
- exploration
- Sample Type
- drill
- Group ID
- BTPRC010:79-82
- Mining Method
- unknown
QA/QC
- QP Signed
- Yes
Deleterious
- Deleterious Flag
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-29T00:00:00.000Z
Reasoning: The indium grade of 8.3 g/t over 3m is a strong result, above the project's historical average indium grade, confirming the high-grade potential of the shoots.
Positive factors
- Strong indium grade
- Confirms high-grade shoots
- Above prior project average
Negative factors
- Apparent width only
Evidence · text
“3m @ 249.6 g/t Ag, 12.19% Pb, 6.05% Zn and 8.3 g/t In from 79m”
Tags used in scoring
No QA/QC Disclosurenegative
Release does not disclose QA/QC — lab certification, CP/QP sign-off and assay protocols cannot be checked from this document.
Why it applies: qaqc_disclosed is not true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
BTPRC011Ruddygore Project: Torpy’s · silverGrade: 71.3Grade Unit: g/tIntercept: 29 mView all detailsHide details
Identity
- Hole ID
- BTPRC011
- Project
- Ruddygore Project: Torpy’s
- Commodity
- silver
- Region
- australia_qld
- Reported Region
- australia_qld
- Ticker
- BMR
Geometry
- Grade
- 71.3
- Grade Unit
- g/t
- Intercept
- 29 m
- From
- 105 m
- To
- 134 m
- Intercept Depth
- 105 m
Classification
- Deposit Type
- sedex
- Program
- exploration
- Sample Type
- drill
- Group ID
- BTPRC011:105-134
- Mining Method
- unknown
QA/QC
- QP Signed
- Yes
Deleterious
- Deleterious Flag
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-29T00:00:00.000Z
Reasoning: This intercept of 29m at 71.3 g/t Ag is a moderate result, significant for its width and confirming mineralization continuity at Torpy's.
Positive factors
- Moderate silver grade over significant width
- Confirms mineralization continuity
Negative factors
- Below prior project average
- Apparent width only
Evidence · text
“29m @ 71.3 g/t Ag, 3.64% Pb, 2.19% Zn and 7.1 g/t In from 105m”
Tags used in scoring
No QA/QC Disclosurenegative
Release does not disclose QA/QC — lab certification, CP/QP sign-off and assay protocols cannot be checked from this document.
Why it applies: qaqc_disclosed is not true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
BTPRC011Ruddygore Project: Torpy’s · leadGrade: 3.64Grade Unit: %Intercept: 29 mView all detailsHide details
Identity
- Hole ID
- BTPRC011
- Project
- Ruddygore Project: Torpy’s
- Commodity
- lead
- Region
- australia_qld
- Reported Region
- australia_qld
- Ticker
- BMR
Geometry
- Grade
- 3.64
- Grade Unit
- %
- Intercept
- 29 m
- From
- 105 m
- To
- 134 m
- Intercept Depth
- 105 m
Classification
- Deposit Type
- sedex
- Program
- exploration
- Sample Type
- drill
- Group ID
- BTPRC011:105-134
- Mining Method
- unknown
QA/QC
- QP Signed
- Yes
Deleterious
- Deleterious Flag
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-29T00:00:00.000Z
Reasoning: The lead grade of 3.64% over 29m is a moderate result, significant for its width and confirming mineralization continuity at Torpy's.
Positive factors
- Moderate lead grade over significant width
- Confirms mineralization continuity
Negative factors
- Below prior project average
- Apparent width only
Evidence · text
“29m @ 71.3 g/t Ag, 3.64% Pb, 2.19% Zn and 7.1 g/t In from 105m”
Tags used in scoring
No QA/QC Disclosurenegative
Release does not disclose QA/QC — lab certification, CP/QP sign-off and assay protocols cannot be checked from this document.
Why it applies: qaqc_disclosed is not true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
BTPRC011Ruddygore Project: Torpy’s · zincGrade: 2.19Grade Unit: %Intercept: 29 mView all detailsHide details
Identity
- Hole ID
- BTPRC011
- Project
- Ruddygore Project: Torpy’s
- Commodity
- zinc
- Region
- australia_qld
- Reported Region
- australia_qld
- Ticker
- BMR
Geometry
- Grade
- 2.19
- Grade Unit
- %
- Intercept
- 29 m
- From
- 105 m
- To
- 134 m
- Intercept Depth
- 105 m
Classification
- Deposit Type
- sedex
- Program
- exploration
- Sample Type
- drill
- Group ID
- BTPRC011:105-134
- Mining Method
- unknown
QA/QC
- QP Signed
- Yes
Deleterious
- Deleterious Flag
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-29T00:00:00.000Z
Reasoning: The zinc grade of 2.19% over 29m is a weak result, below the project's historical average, but still contributes to the polymetallic nature of the mineralization.
Positive factors
- Contributes to polymetallic nature of mineralization
Negative factors
- Weak zinc grade
- Below prior project average
- Apparent width only
Evidence · text
“29m @ 71.3 g/t Ag, 3.64% Pb, 2.19% Zn and 7.1 g/t In from 105m”
Tags used in scoring
No QA/QC Disclosurenegative
Release does not disclose QA/QC — lab certification, CP/QP sign-off and assay protocols cannot be checked from this document.
Why it applies: qaqc_disclosed is not true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
BTPRC011Ruddygore Project: Torpy’s · indiumGrade: 7.1Grade Unit: g/tIntercept: 29 mView all detailsHide details
Identity
- Hole ID
- BTPRC011
- Project
- Ruddygore Project: Torpy’s
- Commodity
- indium
- Region
- australia_qld
- Reported Region
- australia_qld
- Ticker
- BMR
Geometry
- Grade
- 7.1
- Grade Unit
- g/t
- Intercept
- 29 m
- From
- 105 m
- To
- 134 m
- Intercept Depth
- 105 m
Classification
- Deposit Type
- sedex
- Program
- exploration
- Sample Type
- drill
- Group ID
- BTPRC011:105-134
- Mining Method
- unknown
QA/QC
- QP Signed
- Yes
Deleterious
- Deleterious Flag
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-29T00:00:00.000Z
Reasoning: The indium grade of 7.1 g/t over 29m is a strong result, above the project's historical average indium grade, confirming mineralization continuity at Torpy's.
Positive factors
- Strong indium grade over significant width
- Confirms mineralization continuity
- Above prior project average
Negative factors
- Apparent width only
Evidence · text
“29m @ 71.3 g/t Ag, 3.64% Pb, 2.19% Zn and 7.1 g/t In from 105m”
Tags used in scoring
No QA/QC Disclosurenegative
Release does not disclose QA/QC — lab certification, CP/QP sign-off and assay protocols cannot be checked from this document.
Why it applies: qaqc_disclosed is not true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
BTPRC011Ruddygore Project: Torpy’s · silverGrade: 126.1Grade Unit: g/tIntercept: 5 mView all detailsHide details
Identity
- Hole ID
- BTPRC011
- Project
- Ruddygore Project: Torpy’s
- Commodity
- silver
- Region
- australia_qld
- Reported Region
- australia_qld
- Ticker
- BMR
Geometry
- Grade
- 126.1
- Grade Unit
- g/t
- Intercept
- 5 m
- From
- 107 m
- To
- 112 m
- Intercept Depth
- 107 m
Classification
- Deposit Type
- sedex
- Program
- exploration
- Sample Type
- drill
- Group ID
- BTPRC011:107-112
- Mining Method
- unknown
QA/QC
- QP Signed
- Yes
Deleterious
- Deleterious Flag
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-29T00:00:00.000Z
Reasoning: This sub-interval of 5m at 126.1 g/t Ag is a strong result, above the project's historical average silver grade, confirming the presence of high-grade shoots within the broader mineralized zone.
Positive factors
- High-grade silver sub-interval
- Confirms high-grade shoots
- Above prior project average
Negative factors
- Apparent width only
Evidence · text
“5m @ 126.1 g/t Ag, 8.57% Pb, 2.63% Zn and 5.0 g/t In from 107m”
Tags used in scoring
No QA/QC Disclosurenegative
Release does not disclose QA/QC — lab certification, CP/QP sign-off and assay protocols cannot be checked from this document.
Why it applies: qaqc_disclosed is not true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
BTPRC011Ruddygore Project: Torpy’s · leadGrade: 8.57Grade Unit: %Intercept: 5 mView all detailsHide details
Identity
- Hole ID
- BTPRC011
- Project
- Ruddygore Project: Torpy’s
- Commodity
- lead
- Region
- australia_qld
- Reported Region
- australia_qld
- Ticker
- BMR
Geometry
- Grade
- 8.57
- Grade Unit
- %
- Intercept
- 5 m
- From
- 107 m
- To
- 112 m
- Intercept Depth
- 107 m
Classification
- Deposit Type
- sedex
- Program
- exploration
- Sample Type
- drill
- Group ID
- BTPRC011:107-112
- Mining Method
- unknown
QA/QC
- QP Signed
- Yes
Deleterious
- Deleterious Flag
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-29T00:00:00.000Z
Reasoning: The lead grade of 8.57% over 5m is a strong result, above the project's historical average lead grade, confirming the presence of high-grade shoots within the broader mineralized zone.
Positive factors
- Strong lead grade
- Confirms high-grade shoots
- Above prior project average
Negative factors
- Apparent width only
Evidence · text
“5m @ 126.1 g/t Ag, 8.57% Pb, 2.63% Zn and 5.0 g/t In from 107m”
Tags used in scoring
No QA/QC Disclosurenegative
Release does not disclose QA/QC — lab certification, CP/QP sign-off and assay protocols cannot be checked from this document.
Why it applies: qaqc_disclosed is not true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
BTPRC011Ruddygore Project: Torpy’s · zincGrade: 2.63Grade Unit: %Intercept: 5 mView all detailsHide details
Identity
- Hole ID
- BTPRC011
- Project
- Ruddygore Project: Torpy’s
- Commodity
- zinc
- Region
- australia_qld
- Reported Region
- australia_qld
- Ticker
- BMR
Geometry
- Grade
- 2.63
- Grade Unit
- %
- Intercept
- 5 m
- From
- 107 m
- To
- 112 m
- Intercept Depth
- 107 m
Classification
- Deposit Type
- sedex
- Program
- exploration
- Sample Type
- drill
- Group ID
- BTPRC011:107-112
- Mining Method
- unknown
QA/QC
- QP Signed
- Yes
Deleterious
- Deleterious Flag
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-29T00:00:00.000Z
Reasoning: The zinc grade of 2.63% over 5m is a weak result, below the project's historical average, but still contributes to the polymetallic nature of the mineralization.
Positive factors
- Contributes to polymetallic nature of mineralization
Negative factors
- Weak zinc grade
- Below prior project average
- Apparent width only
Evidence · text
“5m @ 126.1 g/t Ag, 8.57% Pb, 2.63% Zn and 5.0 g/t In from 107m”
Tags used in scoring
No QA/QC Disclosurenegative
Release does not disclose QA/QC — lab certification, CP/QP sign-off and assay protocols cannot be checked from this document.
Why it applies: qaqc_disclosed is not true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
BTPRC011Ruddygore Project: Torpy’s · indiumGrade: 5Grade Unit: g/tIntercept: 5 mView all detailsHide details
Identity
- Hole ID
- BTPRC011
- Project
- Ruddygore Project: Torpy’s
- Commodity
- indium
- Region
- australia_qld
- Reported Region
- australia_qld
- Ticker
- BMR
Geometry
- Grade
- 5
- Grade Unit
- g/t
- Intercept
- 5 m
- From
- 107 m
- To
- 112 m
- Intercept Depth
- 107 m
Classification
- Deposit Type
- sedex
- Program
- exploration
- Sample Type
- drill
- Group ID
- BTPRC011:107-112
- Mining Method
- unknown
QA/QC
- QP Signed
- Yes
Deleterious
- Deleterious Flag
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-29T00:00:00.000Z
Reasoning: The indium grade of 5.0 g/t over 5m is a moderate result, below the project's historical average, but confirms the presence of high-grade shoots within the broader mineralized zone.
Positive factors
- Moderate indium grade
- Confirms high-grade shoots
Negative factors
- Below prior project average
- Apparent width only
Evidence · text
“5m @ 126.1 g/t Ag, 8.57% Pb, 2.63% Zn and 5.0 g/t In from 107m”
Tags used in scoring
No QA/QC Disclosurenegative
Release does not disclose QA/QC — lab certification, CP/QP sign-off and assay protocols cannot be checked from this document.
Why it applies: qaqc_disclosed is not true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
BTPRC011Ruddygore Project: Torpy’s · silverGrade: 104.9Grade Unit: g/tIntercept: 13 mView all detailsHide details
Identity
- Hole ID
- BTPRC011
- Project
- Ruddygore Project: Torpy’s
- Commodity
- silver
- Region
- australia_qld
- Reported Region
- australia_qld
- Ticker
- BMR
Geometry
- Grade
- 104.9
- Grade Unit
- g/t
- Intercept
- 13 m
- From
- 120 m
- To
- 133 m
- Intercept Depth
- 120 m
Classification
- Deposit Type
- sedex
- Program
- exploration
- Sample Type
- drill
- Group ID
- BTPRC011:120-133
- Mining Method
- unknown
QA/QC
- QP Signed
- Yes
Deleterious
- Deleterious Flag
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-29T00:00:00.000Z
Reasoning: This sub-interval of 13m at 104.9 g/t Ag is a moderate result, confirming mineralization continuity at Torpy's over a good width.
Positive factors
- Moderate silver grade over good width
- Confirms mineralization continuity
Negative factors
- Below prior project average
- Apparent width only
Evidence · text
“13m @ 104.9 g/t Ag, 4.59% Pb, 3.57% Zn and 13.27 g/t In from 120m”
Tags used in scoring
No QA/QC Disclosurenegative
Release does not disclose QA/QC — lab certification, CP/QP sign-off and assay protocols cannot be checked from this document.
Why it applies: qaqc_disclosed is not true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
BTPRC011Ruddygore Project: Torpy’s · leadGrade: 4.59Grade Unit: %Intercept: 13 mView all detailsHide details
Identity
- Hole ID
- BTPRC011
- Project
- Ruddygore Project: Torpy’s
- Commodity
- lead
- Region
- australia_qld
- Reported Region
- australia_qld
- Ticker
- BMR
Geometry
- Grade
- 4.59
- Grade Unit
- %
- Intercept
- 13 m
- From
- 120 m
- To
- 133 m
- Intercept Depth
- 120 m
Classification
- Deposit Type
- sedex
- Program
- exploration
- Sample Type
- drill
- Group ID
- BTPRC011:120-133
- Mining Method
- unknown
QA/QC
- QP Signed
- Yes
Deleterious
- Deleterious Flag
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-29T00:00:00.000Z
Reasoning: The lead grade of 4.59% over 13m is a moderate result, confirming mineralization continuity at Torpy's over a good width.
Positive factors
- Moderate lead grade over good width
- Confirms mineralization continuity
Negative factors
- Below prior project average
- Apparent width only
Evidence · text
“13m @ 104.9 g/t Ag, 4.59% Pb, 3.57% Zn and 13.27 g/t In from 120m”
Tags used in scoring
No QA/QC Disclosurenegative
Release does not disclose QA/QC — lab certification, CP/QP sign-off and assay protocols cannot be checked from this document.
Why it applies: qaqc_disclosed is not true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
BTPRC011Ruddygore Project: Torpy’s · zincGrade: 3.57Grade Unit: %Intercept: 13 mView all detailsHide details
Identity
- Hole ID
- BTPRC011
- Project
- Ruddygore Project: Torpy’s
- Commodity
- zinc
- Region
- australia_qld
- Reported Region
- australia_qld
- Ticker
- BMR
Geometry
- Grade
- 3.57
- Grade Unit
- %
- Intercept
- 13 m
- From
- 120 m
- To
- 133 m
- Intercept Depth
- 120 m
Classification
- Deposit Type
- sedex
- Program
- exploration
- Sample Type
- drill
- Group ID
- BTPRC011:120-133
- Mining Method
- unknown
QA/QC
- QP Signed
- Yes
Deleterious
- Deleterious Flag
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-29T00:00:00.000Z
Reasoning: The zinc grade of 3.57% over 13m is a moderate result, confirming mineralization continuity at Torpy's over a good width.
Positive factors
- Moderate zinc grade over good width
- Confirms mineralization continuity
Negative factors
- Below prior project average
- Apparent width only
Evidence · text
“13m @ 104.9 g/t Ag, 4.59% Pb, 3.57% Zn and 13.27 g/t In from 120m”
Tags used in scoring
No QA/QC Disclosurenegative
Release does not disclose QA/QC — lab certification, CP/QP sign-off and assay protocols cannot be checked from this document.
Why it applies: qaqc_disclosed is not true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
BTPRC011Ruddygore Project: Torpy’s · indiumGrade: 13.27Grade Unit: g/tIntercept: 13 mView all detailsHide details
Identity
- Hole ID
- BTPRC011
- Project
- Ruddygore Project: Torpy’s
- Commodity
- indium
- Region
- australia_qld
- Reported Region
- australia_qld
- Ticker
- BMR
Geometry
- Grade
- 13.27
- Grade Unit
- g/t
- Intercept
- 13 m
- From
- 120 m
- To
- 133 m
- Intercept Depth
- 120 m
Classification
- Deposit Type
- sedex
- Program
- exploration
- Sample Type
- drill
- Group ID
- BTPRC011:120-133
- Mining Method
- unknown
QA/QC
- QP Signed
- Yes
Deleterious
- Deleterious Flag
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-29T00:00:00.000Z
Reasoning: The indium grade of 13.27 g/t over 13m is a very strong result, exceeding the project's historical best indium grade and confirming mineralization continuity at Torpy's.
Positive factors
- Very strong indium grade over good width
- Confirms mineralization continuity
- Above prior project average and best grade
Negative factors
- Apparent width only
Evidence · text
“13m @ 104.9 g/t Ag, 4.59% Pb, 3.57% Zn and 13.27 g/t In from 120m”
Tags used in scoring
No QA/QC Disclosurenegative
Release does not disclose QA/QC — lab certification, CP/QP sign-off and assay protocols cannot be checked from this document.
Why it applies: qaqc_disclosed is not true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
BSMDD006Ravenswood Project: Seventy Mile Mount · goldGrade: 0.247Grade Unit: g/tIntercept: 84.5 mView all detailsHide details
Identity
- Hole ID
- BSMDD006
- Project
- Ravenswood Project: Seventy Mile Mount
- Commodity
- gold
- Region
- australia_qld
- Reported Region
- australia_qld
- Ticker
- BMR
Geometry
- Grade
- 0.247
- Grade Unit
- g/t
- Intercept
- 84.5 m
- From
- 25 m
- To
- 109.5 m
- Intercept Depth
- 25 m
Classification
- Deposit Type
- other
- Program
- exploration
- Sample Type
- drill
- Group ID
- BSMDD006:25-109.5
- Mining Method
- open_pit
QA/QC
- QP Signed
- Yes
Deleterious
- Deleterious Flag
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-29T00:00:00.000Z
Reasoning: This intercept of 84.5m at 0.247 g/t Au is a significant broad, shallow zone of gold mineralization, supporting the potential for a bulk-tonnage open pit target at Seventy Mile Mount, despite the weak grade.
Positive factors
- Broad, shallow gold mineralization
- Supports bulk-tonnage target potential
Negative factors
- Weak gold grade for open pit
- Apparent width only
Evidence · text
“84.5m at 0.247g/t Au from 25m”
Tags used in scoring
No QA/QC Disclosurenegative
Release does not disclose QA/QC — lab certification, CP/QP sign-off and assay protocols cannot be checked from this document.
Why it applies: qaqc_disclosed is not true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
BSMDD006Ravenswood Project: Seventy Mile Mount · goldGrade: 0.83Grade Unit: g/tIntercept: 15.4 mView all detailsHide details
Identity
- Hole ID
- BSMDD006
- Project
- Ravenswood Project: Seventy Mile Mount
- Commodity
- gold
- Region
- australia_qld
- Reported Region
- australia_qld
- Ticker
- BMR
Geometry
- Grade
- 0.83
- Grade Unit
- g/t
- Intercept
- 15.4 m
- From
- 207.6 m
- To
- 223 m
- Intercept Depth
- 207.6 m
Classification
- Deposit Type
- other
- Program
- exploration
- Sample Type
- drill
- Group ID
- BSMDD006:207.6-223
- Mining Method
- open_pit
QA/QC
- QP Signed
- Yes
Deleterious
- Deleterious Flag
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-29T00:00:00.000Z
Reasoning: This intercept of 15.4m at 0.83 g/t Au is a moderate result, confirming gold mineralization continuity at greater depth within the breccia system.
Positive factors
- Moderate gold grade over good width
- Confirms mineralization continuity at depth
Negative factors
- Apparent width only
Evidence · text
“15.4m at 0.83g/t Au from 207.6m”
Tags used in scoring
No QA/QC Disclosurenegative
Release does not disclose QA/QC — lab certification, CP/QP sign-off and assay protocols cannot be checked from this document.
Why it applies: qaqc_disclosed is not true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
BSMDD006Ravenswood Project: Seventy Mile Mount · goldGrade: 3.347Grade Unit: g/tIntercept: 3.5 mView all detailsHide details
Identity
- Hole ID
- BSMDD006
- Project
- Ravenswood Project: Seventy Mile Mount
- Commodity
- gold
- Region
- australia_qld
- Reported Region
- australia_qld
- Ticker
- BMR
Geometry
- Grade
- 3.347
- Grade Unit
- g/t
- Intercept
- 3.5 m
- From
- 219.5 m
- To
- 223 m
- Intercept Depth
- 219.5 m
Classification
- Deposit Type
- other
- Program
- exploration
- Sample Type
- drill
- Group ID
- BSMDD006:219.5-223
- Mining Method
- open_pit
QA/QC
- QP Signed
- Yes
Deleterious
- Deleterious Flag
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-29T00:00:00.000Z
Reasoning: This sub-interval of 3.5m at 3.347 g/t Au is a strong result, indicating the presence of higher-grade zones within the broader mineralization at Seventy Mile Mount.
Positive factors
- Strong gold grade sub-interval
- Indicates higher-grade zones within broader mineralization
Negative factors
- Narrow intercept length
- Apparent width only
Evidence · text
“3.5m at 3.347g/t Au from 219.5m”
Tags used in scoring
No QA/QC Disclosurenegative
Release does not disclose QA/QC — lab certification, CP/QP sign-off and assay protocols cannot be checked from this document.
Why it applies: qaqc_disclosed is not true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
BSMDD007Ravenswood Project: Seventy Mile Mount · goldGrade: 0.456Grade Unit: g/tIntercept: 56 mView all detailsHide details
Identity
- Hole ID
- BSMDD007
- Project
- Ravenswood Project: Seventy Mile Mount
- Commodity
- gold
- Region
- australia_qld
- Reported Region
- australia_qld
- Ticker
- BMR
Geometry
- Grade
- 0.456
- Grade Unit
- g/t
- Intercept
- 56 m
- From
- 31 m
- To
- 87 m
- Intercept Depth
- 31 m
Classification
- Deposit Type
- other
- Program
- exploration
- Sample Type
- drill
- Group ID
- BSMDD007:31-87
- Mining Method
- open_pit
QA/QC
- QP Signed
- Yes
Deleterious
- Deleterious Flag
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-29T00:00:00.000Z
Reasoning: This intercept of 56m at 0.456 g/t Au is a significant broad, shallow zone of gold mineralization, further supporting the potential for a bulk-tonnage open pit target at Seventy Mile Mount, despite the weak grade.
Positive factors
- Broad, shallow gold mineralization
- Supports bulk-tonnage target potential
Negative factors
- Weak gold grade for open pit
- Apparent width only
Evidence · text
“56m at 0.456g/t Au from 31m”
Tags used in scoring
No QA/QC Disclosurenegative
Release does not disclose QA/QC — lab certification, CP/QP sign-off and assay protocols cannot be checked from this document.
Why it applies: qaqc_disclosed is not true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
How Atlas produces this analysis
Minestarters Atlas uses automated extraction to summarize mining announcements, identify reported measurements, and classify supporting evidence. Sentiment reflects the extracted narrative and classification rules; it is an interpretation, not a reported measurement. Evidence quotes and context are provided where available. Missing data, low-confidence results, and review flags indicate limitations. Check the original publisher announcement before relying on an interpretation.