Blue Moon Announces Initial Results from Ongoing Infill Drilling Campaign at its Nussir Project and Further Deep Drilling Exploration Results Blue Moon Metals Inc. ("Blue Moon" or the "Company") (TSXV: MOON) (NASDAQ: BMM), is pleased to announce new drilling results from its ongoing surface ...
Original announcement by prnewswire on
- Company
- Blue Moon Metals Inc.
- Ticker
- MOON
- Exchange
- Unavailable
- Region
- Finnmark, Norway
- Primary commodity
- Copper
- Secondary commodities
- Gold, Silver, Platinum, Palladium
- Document categories
- Drill results
- Extracted
- 2026-08-24 04:23:31 UTC
Analysis by Minestarters Atlas
Minestarters Atlas analysis
Summary
Blue Moon Metals Inc. has released new infill and deep exploration drilling results from its Nussir Project in Finnmark, Norway. The infill program confirmed mineralization continuity and aims to upgrade resources to the Measured category, while deep exploration extended high-grade mineralization. The results include several high-grade copper intercepts, with associated gold, silver, platinum, and palladium, all supported by transparent QA/QC and metal equivalent assumptions.
Reasoning: Blue Moon Metals announced strong infill and deep exploration drill results from its Nussir Project. The infill drilling confirms continuity and targets resource upgrades, while deep exploration extends high-grade mineralization. The results include several exceptional copper intercepts, supported by transparent QA/QC and metal equivalent assumptions.
Positive factors
- High-grade copper intercepts, some exceptional for VMS deposit type.
- Infill drilling confirms mineralization continuity and aims to upgrade resources to Measured category.
- Deep exploration extends high-grade mineralization, indicating potential for further growth.
- Detailed QA/QC procedures disclosed, including certified lab and QP sign-off.
- True width disclosed for all reported intercepts.
Low confidence — this extraction should be reviewed alongside the original source.
Facts used in scoring: 45
Classification and evidence
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: The release includes a detailed 'SAMPLING AND QA/QC' section, mentioning ALS ISO 17025 accreditation, QP sign-off, and methods like blanks, duplicates, and CRMs.
Evidence · text
“SAMPLING AND QA/QC Drill core currently produced at Nussir are in both NQ and HQ diameters; the 2026 winter-spring infill program was drilled in HQ for greater sample yield for ongoing metallurgical test work. This HQ drill core was sampled with half sawn core for metallurgical test work and quarter core for multi-element analysis. The NQ drill core, produced from all other programs, will use half core samples for multi-element analysis. The remaining half and quarter core will be retained by Blue Moon for future reference. Starting in March 2026, Blue Moon's samples from Q1 drilling have been shipped and delivered to ALS Piteå in Sweden. Such material has also been complemented by previously unsampled, mineralized material, from historical drill cores stored at The Geological Survey of Norway's drill core archive at Løkken. Samples are prepared at ALS Piteå before being shipped to ALS's facility in Ireland where they are subjected to fire assay and multi-element analysis (currently ME-ICP61 & PGM-ICP24). The ALS laboratory in Piteå maintains ISO 17025 accreditation via SWEDAC. Sample size is stipulated to be 1 meter, while acknowledging boundaries such as lithological contacts. The current procedure is to sample 15 meters to either side of known and visual mineralization. QA/QC samples, in the form of sample blanks, duplicates and certified reference materials (" CRM ") are currently inserted every 8 th sample, equating to an insertion rate of 12.5%. Duplicates are quarter core whilst CRM material, closely matched to the Nussir mineralization, is supplied from OREAS.”
Metal Equivalent Opaquenegative
Metal equivalent grade reported without disclosing the price, recovery, or payability assumptions used.
Why it applies: The metal equivalent calculation assumptions (metal prices, recovery assumptions, and formula) are clearly disclosed below the tables.
Evidence · text
“1. Metal prices assumed were US$4.20/lb Cu, US$27.00/oz Ag and US$2,200/oz Au and coefficient factors of 0.00781 for Ag and 0.740 for Au 2. The applied formula for copper equivalent was: CuEq% = Cu%_Grade + (0.00781 * Ag_Grade) + (0.74 * Au_Grade) 3. Metallurgical recovery assumptions were 96% Cu, 80% Ag and 93% Au, which stem from SGS metallurgical test work completed in 2022 4. The cut-off grade of 0.30% Cu was derived from the price and recovery values above, as well as a smelter payability of 97.3% and an assumed total operating cost $26.20/t of ore”
Extracted facts
Stored fact records: 45. Some facts used in scoring do not have a stored record.
Drill Results (45)
GT-DD-26-05Nussir · copperGrade: 1.36Grade Unit: %Intercept: 2 mView all detailsHide details
Identity
- Hole ID
- GT-DD-26-05
- Project
- Nussir
- Commodity
- copper
- Region
- finnmark, norway
- Reported Region
- Finnmark, Norway
- Ticker
- MOON
Geometry
- Grade
- 1.36
- Grade Unit
- %
- Intercept
- 2 m
- True Width
- 1.4 m
- From
- 179 m
- To
- 181 m
Classification
- Deposit Type
- vms
- Program
- resource
- Sample Type
- drill
- Group ID
- GT-DD-26-05:179-181
- Mining Method
- underground
Location
- Loc. Confidence
- low
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- blanks, duplicates, certified_reference_materials
Metal Equivalent
- Metal Eq. Grade
- 1.6
- Metal Eq. Unit
- % CuEq
- Assumptions Disclosed
- Yes
Compositing
- Cutoff Grade
- 0.3
- Cutoff Unit
- % Cu
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-08-18T00:00:00.000Z
Reasoning: The intercept shows a strong copper grade of 1.36% over 1.4m true width, which is a good result for a VMS deposit, confirming mineralization continuity in the infill program.
Positive factors
- Strong copper grade for VMS deposit type.
- True width disclosed.
Evidence · table
“1.36”
Context: GT-DD-26-05
Tags used in scoring
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: The intercept is part of the 'ongoing infill drilling program' aimed at increasing confidence in reserves.
Evidence · text
“ongoing infill drilling program”
Rejected tags
Rejected tags — excluded from scoring because their label or evidence could not be verified.
True Width DisclosedRejected · positive
Actual thickness perpendicular to structure is stated, not just downhole length.
Reason: The table explicitly states 'True Thickness m' for the intercept.
Evidence · table
“1.4”
Context: GT-DD-26-05
GT-DD-26-05Nussir · copperGrade: 1.65Grade Unit: %View all detailsHide details
Identity
- Hole ID
- GT-DD-26-05
- Project
- Nussir
- Commodity
- copper
- Region
- finnmark, norway
- Reported Region
- Finnmark, Norway
- Ticker
- MOON
Geometry
- Grade
- 1.65
- Grade Unit
- %
- True Width
- 0.7 m
Classification
- Deposit Type
- vms
- Program
- resource
- Sample Type
- drill
- Mining Method
- underground
Location
- Loc. Confidence
- low
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- blanks, duplicates, certified_reference_materials
Metal Equivalent
- Metal Eq. Grade
- 1.98
- Metal Eq. Unit
- % CuEq
- Assumptions Disclosed
- Yes
Compositing
- Cutoff Grade
- 0.3
- Cutoff Unit
- % Cu
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-08-18T00:00:00.000Z
Reasoning: This sub-interval shows an even higher copper grade of 1.65% over 0.7m true width, indicating a higher-grade zone within the broader intercept, which is positive for resource confidence.
Positive factors
- Strong copper grade for VMS deposit type.
- True width disclosed.
Evidence · table
“1.65”
Context: Including
Tags used in scoring
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: The intercept is part of the 'ongoing infill drilling program' aimed at increasing confidence in reserves.
Evidence · text
“ongoing infill drilling program”
Rejected tags
Rejected tags — excluded from scoring because their label or evidence could not be verified.
True Width DisclosedRejected · positive
Actual thickness perpendicular to structure is stated, not just downhole length.
Reason: The table explicitly states 'True Thickness m' for the intercept.
Evidence · table
“0.7”
Context: Including
NUS-DD-26-01Nussir · copperGrade: 1.97Grade Unit: %Intercept: 1.7 mView all detailsHide details
Identity
- Hole ID
- NUS-DD-26-01
- Project
- Nussir
- Commodity
- copper
- Region
- finnmark, norway
- Reported Region
- Finnmark, Norway
- Ticker
- MOON
Geometry
- Grade
- 1.97
- Grade Unit
- %
- Intercept
- 1.7 m
- True Width
- 1.5 m
- From
- 122.6 m
- To
- 124.3 m
Classification
- Deposit Type
- vms
- Program
- resource
- Sample Type
- drill
- Group ID
- NUS-DD-26-01:122.6-124.3
- Mining Method
- underground
Location
- Loc. Confidence
- low
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- blanks, duplicates, certified_reference_materials
Metal Equivalent
- Metal Eq. Grade
- 2.21
- Metal Eq. Unit
- % CuEq
- Assumptions Disclosed
- Yes
Compositing
- Cutoff Grade
- 0.3
- Cutoff Unit
- % Cu
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-08-18T00:00:00.000Z
Reasoning: This intercept shows a strong copper grade of 1.97% over 1.5m true width, contributing positively to the infill program's goal of confirming mineralization continuity.
Positive factors
- Strong copper grade for VMS deposit type.
- True width disclosed.
Evidence · table
“1.97”
Context: NUS-DD-26-01
Tags used in scoring
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: The intercept is part of the 'ongoing infill drilling program' aimed at increasing confidence in reserves.
Evidence · text
“ongoing infill drilling program”
Rejected tags
Rejected tags — excluded from scoring because their label or evidence could not be verified.
True Width DisclosedRejected · positive
Actual thickness perpendicular to structure is stated, not just downhole length.
Reason: The table explicitly states 'True Thickness m' for the intercept.
Evidence · table
“1.5”
Context: NUS-DD-26-01
NUS-DD-26-01Nussir · copperGrade: 2.37Grade Unit: %View all detailsHide details
Identity
- Hole ID
- NUS-DD-26-01
- Project
- Nussir
- Commodity
- copper
- Region
- finnmark, norway
- Reported Region
- Finnmark, Norway
- Ticker
- MOON
Geometry
- Grade
- 2.37
- Grade Unit
- %
- True Width
- 0.9 m
Classification
- Deposit Type
- vms
- Program
- resource
- Sample Type
- drill
- Mining Method
- underground
Location
- Loc. Confidence
- low
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- blanks, duplicates, certified_reference_materials
Metal Equivalent
- Metal Eq. Grade
- 2.67
- Metal Eq. Unit
- % CuEq
- Assumptions Disclosed
- Yes
Compositing
- Cutoff Grade
- 0.3
- Cutoff Unit
- % Cu
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-08-18T00:00:00.000Z
Reasoning: This sub-interval with 2.37% copper over 0.9m true width is an exceptional result for a VMS deposit, highlighting a very high-grade zone within the broader intercept.
Positive factors
- Exceptional copper grade for VMS deposit type.
- True width disclosed.
Evidence · table
“2.37”
Context: Including
Tags used in scoring
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: The intercept is part of the 'ongoing infill drilling program' aimed at increasing confidence in reserves.
Evidence · text
“ongoing infill drilling program”
Rejected tags
Rejected tags — excluded from scoring because their label or evidence could not be verified.
True Width DisclosedRejected · positive
Actual thickness perpendicular to structure is stated, not just downhole length.
Reason: The table explicitly states 'True Thickness m' for the intercept.
Evidence · table
“0.9”
Context: Including
NUS-DD-26-02Nussir · copperGrade: 1.93Grade Unit: %Intercept: 1.7 mView all detailsHide details
Identity
- Hole ID
- NUS-DD-26-02
- Project
- Nussir
- Commodity
- copper
- Region
- finnmark, norway
- Reported Region
- Finnmark, Norway
- Ticker
- MOON
Geometry
- Grade
- 1.93
- Grade Unit
- %
- Intercept
- 1.7 m
- True Width
- 1.6 m
- From
- 122.3 m
- To
- 124 m
Classification
- Deposit Type
- vms
- Program
- resource
- Sample Type
- drill
- Group ID
- NUS-DD-26-02:122.3-124
- Mining Method
- underground
Location
- Loc. Confidence
- low
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- blanks, duplicates, certified_reference_materials
Metal Equivalent
- Metal Eq. Grade
- 2.2
- Metal Eq. Unit
- % CuEq
- Assumptions Disclosed
- Yes
Compositing
- Cutoff Grade
- 0.3
- Cutoff Unit
- % Cu
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-08-18T00:00:00.000Z
Reasoning: This intercept shows a strong copper grade of 1.93% over 1.6m true width, further confirming mineralization continuity in the infill program.
Positive factors
- Strong copper grade for VMS deposit type.
- True width disclosed.
Evidence · table
“1.93”
Context: NUS-DD-26-02
Tags used in scoring
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: The intercept is part of the 'ongoing infill drilling program' aimed at increasing confidence in reserves.
Evidence · text
“ongoing infill drilling program”
Rejected tags
Rejected tags — excluded from scoring because their label or evidence could not be verified.
True Width DisclosedRejected · positive
Actual thickness perpendicular to structure is stated, not just downhole length.
Reason: The table explicitly states 'True Thickness m' for the intercept.
Evidence · table
“1.6”
Context: NUS-DD-26-02
NUS-DD-26-02Nussir · copperGrade: 3.59Grade Unit: %View all detailsHide details
Identity
- Hole ID
- NUS-DD-26-02
- Project
- Nussir
- Commodity
- copper
- Region
- finnmark, norway
- Reported Region
- Finnmark, Norway
- Ticker
- MOON
Geometry
- Grade
- 3.59
- Grade Unit
- %
- True Width
- 0.8 m
Classification
- Deposit Type
- vms
- Program
- resource
- Sample Type
- drill
- Mining Method
- underground
Location
- Loc. Confidence
- low
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- blanks, duplicates, certified_reference_materials
Metal Equivalent
- Metal Eq. Grade
- 4.08
- Metal Eq. Unit
- % CuEq
- Assumptions Disclosed
- Yes
Compositing
- Cutoff Grade
- 0.3
- Cutoff Unit
- % Cu
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-08-18T00:00:00.000Z
Reasoning: This sub-interval with 3.59% copper over 0.8m true width is an exceptional result and a bonanza intercept for a VMS deposit, indicating a very high-grade zone.
Positive factors
- Exceptional copper grade for VMS deposit type.
- True width disclosed.
- Bonanza Intercept
Evidence · table
“3.59”
Context: Including
Tags used in scoring
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: The intercept is part of the 'ongoing infill drilling program' aimed at increasing confidence in reserves.
Evidence · text
“ongoing infill drilling program”
Rejected tags
Rejected tags — excluded from scoring because their label or evidence could not be verified.
Bonanza InterceptRejected · positive
Exceptionally high-grade zone, well above the deposit-type norm.
Reason: The copper grade of 3.59% is well above the exceptional threshold of 2.5% for VMS copper deposits.
Evidence · table
“3.59”
Context: Including
True Width DisclosedRejected · positive
Actual thickness perpendicular to structure is stated, not just downhole length.
Reason: The table explicitly states 'True Thickness m' for the intercept.
Evidence · table
“0.8”
Context: Including
NUS-DD-26-03Nussir · copperGrade: 1.19Grade Unit: %Intercept: 3.1 mView all detailsHide details
Identity
- Hole ID
- NUS-DD-26-03
- Project
- Nussir
- Commodity
- copper
- Region
- finnmark, norway
- Reported Region
- Finnmark, Norway
- Ticker
- MOON
Geometry
- Grade
- 1.19
- Grade Unit
- %
- Intercept
- 3.1 m
- True Width
- 3 m
- From
- 124.4 m
- To
- 127.5 m
Classification
- Deposit Type
- vms
- Program
- resource
- Sample Type
- drill
- Group ID
- NUS-DD-26-03:124.4-127.5
- Mining Method
- underground
Location
- Loc. Confidence
- low
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- blanks, duplicates, certified_reference_materials
Metal Equivalent
- Metal Eq. Grade
- 1.33
- Metal Eq. Unit
- % CuEq
- Assumptions Disclosed
- Yes
Compositing
- Cutoff Grade
- 0.3
- Cutoff Unit
- % Cu
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-08-18T00:00:00.000Z
Reasoning: This intercept shows a strong copper grade of 1.19% over 3.0m true width, which is a good result for a VMS deposit, confirming mineralization continuity.
Positive factors
- Strong copper grade for VMS deposit type.
- True width disclosed.
Evidence · table
“1.19”
Context: NUS-DD-26-03
Tags used in scoring
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: The intercept is part of the 'ongoing infill drilling program' aimed at increasing confidence in reserves.
Evidence · text
“ongoing infill drilling program”
Rejected tags
Rejected tags — excluded from scoring because their label or evidence could not be verified.
True Width DisclosedRejected · positive
Actual thickness perpendicular to structure is stated, not just downhole length.
Reason: The table explicitly states 'True Thickness m' for the intercept.
Evidence · table
“3.0”
Context: NUS-DD-26-03
NUS-DD-26-03Nussir · copperGrade: 2.73Grade Unit: %View all detailsHide details
Identity
- Hole ID
- NUS-DD-26-03
- Project
- Nussir
- Commodity
- copper
- Region
- finnmark, norway
- Reported Region
- Finnmark, Norway
- Ticker
- MOON
Geometry
- Grade
- 2.73
- Grade Unit
- %
- True Width
- 0.9 m
Classification
- Deposit Type
- vms
- Program
- resource
- Sample Type
- drill
- Mining Method
- underground
Location
- Loc. Confidence
- low
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- blanks, duplicates, certified_reference_materials
Metal Equivalent
- Metal Eq. Grade
- 3.07
- Metal Eq. Unit
- % CuEq
- Assumptions Disclosed
- Yes
Compositing
- Cutoff Grade
- 0.3
- Cutoff Unit
- % Cu
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-08-18T00:00:00.000Z
Reasoning: This sub-interval with 2.73% copper over 0.9m true width is an exceptional result and a bonanza intercept for a VMS deposit, indicating a very high-grade zone.
Positive factors
- Exceptional copper grade for VMS deposit type.
- True width disclosed.
- Bonanza Intercept
Evidence · table
“2.73”
Context: Including
Tags used in scoring
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: The intercept is part of the 'ongoing infill drilling program' aimed at increasing confidence in reserves.
Evidence · text
“ongoing infill drilling program”
Rejected tags
Rejected tags — excluded from scoring because their label or evidence could not be verified.
Bonanza InterceptRejected · positive
Exceptionally high-grade zone, well above the deposit-type norm.
Reason: The copper grade of 2.73% is well above the exceptional threshold of 2.5% for VMS copper deposits.
Evidence · table
“2.73”
Context: Including
True Width DisclosedRejected · positive
Actual thickness perpendicular to structure is stated, not just downhole length.
Reason: The table explicitly states 'True Thickness m' for the intercept.
Evidence · table
“0.9”
Context: Including
NUS-DD-26-04Nussir · copperGrade: 1.17Grade Unit: %Intercept: 3.9 mView all detailsHide details
Identity
- Hole ID
- NUS-DD-26-04
- Project
- Nussir
- Commodity
- copper
- Region
- finnmark, norway
- Reported Region
- Finnmark, Norway
- Ticker
- MOON
Geometry
- Grade
- 1.17
- Grade Unit
- %
- Intercept
- 3.9 m
- True Width
- 3.2 m
- From
- 135.7 m
- To
- 139.6 m
Classification
- Deposit Type
- vms
- Program
- resource
- Sample Type
- drill
- Group ID
- NUS-DD-26-04:135.7-139.6
- Mining Method
- underground
Location
- Loc. Confidence
- low
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- blanks, duplicates, certified_reference_materials
Metal Equivalent
- Metal Eq. Grade
- 1.32
- Metal Eq. Unit
- % CuEq
- Assumptions Disclosed
- Yes
Compositing
- Cutoff Grade
- 0.3
- Cutoff Unit
- % Cu
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-08-18T00:00:00.000Z
Reasoning: This intercept shows a strong copper grade of 1.17% over 3.2m true width, which is a good result for a VMS deposit, confirming mineralization continuity.
Positive factors
- Strong copper grade for VMS deposit type.
- True width disclosed.
Evidence · table
“1.17”
Context: NUS-DD-26-04
Tags used in scoring
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: The intercept is part of the 'ongoing infill drilling program' aimed at increasing confidence in reserves.
Evidence · text
“ongoing infill drilling program”
Rejected tags
Rejected tags — excluded from scoring because their label or evidence could not be verified.
True Width DisclosedRejected · positive
Actual thickness perpendicular to structure is stated, not just downhole length.
Reason: The table explicitly states 'True Thickness m' for the intercept.
Evidence · table
“3.2”
Context: NUS-DD-26-04
NUS-DD-26-04Nussir · copperGrade: 2.59Grade Unit: %View all detailsHide details
Identity
- Hole ID
- NUS-DD-26-04
- Project
- Nussir
- Commodity
- copper
- Region
- finnmark, norway
- Reported Region
- Finnmark, Norway
- Ticker
- MOON
Geometry
- Grade
- 2.59
- Grade Unit
- %
- True Width
- 0.7 m
Classification
- Deposit Type
- vms
- Program
- resource
- Sample Type
- drill
- Mining Method
- underground
Location
- Loc. Confidence
- low
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- blanks, duplicates, certified_reference_materials
Metal Equivalent
- Metal Eq. Grade
- 2.97
- Metal Eq. Unit
- % CuEq
- Assumptions Disclosed
- Yes
Compositing
- Cutoff Grade
- 0.3
- Cutoff Unit
- % Cu
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-08-18T00:00:00.000Z
Reasoning: This sub-interval with 2.59% copper over 0.7m true width is an exceptional result and a bonanza intercept for a VMS deposit, indicating a very high-grade zone.
Positive factors
- Exceptional copper grade for VMS deposit type.
- True width disclosed.
- Bonanza Intercept
Evidence · table
“2.59”
Context: Including
Tags used in scoring
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: The intercept is part of the 'ongoing infill drilling program' aimed at increasing confidence in reserves.
Evidence · text
“ongoing infill drilling program”
Rejected tags
Rejected tags — excluded from scoring because their label or evidence could not be verified.
Bonanza InterceptRejected · positive
Exceptionally high-grade zone, well above the deposit-type norm.
Reason: The copper grade of 2.59% is well above the exceptional threshold of 2.5% for VMS copper deposits.
Evidence · table
“2.59”
Context: Including
True Width DisclosedRejected · positive
Actual thickness perpendicular to structure is stated, not just downhole length.
Reason: The table explicitly states 'True Thickness m' for the intercept.
Evidence · table
“0.7”
Context: Including
NUS-DD-26-05Nussir · copperGrade: 0.35Grade Unit: %Intercept: 1 mView all detailsHide details
Identity
- Hole ID
- NUS-DD-26-05
- Project
- Nussir
- Commodity
- copper
- Region
- finnmark, norway
- Reported Region
- Finnmark, Norway
- Ticker
- MOON
Geometry
- Grade
- 0.35
- Grade Unit
- %
- Intercept
- 1 m
- True Width
- 0.9 m
- From
- 216.9 m
- To
- 217.9 m
Classification
- Deposit Type
- vms
- Program
- resource
- Sample Type
- drill
- Group ID
- NUS-DD-26-05:216.9-217.9
- Mining Method
- underground
Location
- Loc. Confidence
- low
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- blanks, duplicates, certified_reference_materials
Metal Equivalent
- Metal Eq. Grade
- 0.4
- Metal Eq. Unit
- % CuEq
- Assumptions Disclosed
- Yes
Compositing
- Cutoff Grade
- 0.3
- Cutoff Unit
- % Cu
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-08-18T00:00:00.000Z
Reasoning: This intercept shows a moderate copper grade of 0.35% over 0.9m true width, which is above the cut-off but not particularly high-grade for a VMS deposit.
Positive factors
- True width disclosed.
Evidence · table
“0.35”
Context: NUS-DD-26-05
Tags used in scoring
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: The intercept is part of the 'ongoing infill drilling program' aimed at increasing confidence in reserves.
Evidence · text
“ongoing infill drilling program”
Rejected tags
Rejected tags — excluded from scoring because their label or evidence could not be verified.
True Width DisclosedRejected · positive
Actual thickness perpendicular to structure is stated, not just downhole length.
Reason: The table explicitly states 'True Thickness m' for the intercept.
Evidence · table
“0.9”
Context: NUS-DD-26-05
NUS-DD-26-06Nussir · copperGrade: 2.68Grade Unit: %Intercept: 1 mView all detailsHide details
Identity
- Hole ID
- NUS-DD-26-06
- Project
- Nussir
- Commodity
- copper
- Region
- finnmark, norway
- Reported Region
- Finnmark, Norway
- Ticker
- MOON
Geometry
- Grade
- 2.68
- Grade Unit
- %
- Intercept
- 1 m
- True Width
- 0.7 m
- From
- 265 m
- To
- 266 m
Classification
- Deposit Type
- vms
- Program
- resource
- Sample Type
- drill
- Group ID
- NUS-DD-26-06:265-266
- Mining Method
- underground
Location
- Loc. Confidence
- low
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- blanks, duplicates, certified_reference_materials
Metal Equivalent
- Metal Eq. Grade
- 3.14
- Metal Eq. Unit
- % CuEq
- Assumptions Disclosed
- Yes
Compositing
- Cutoff Grade
- 0.3
- Cutoff Unit
- % Cu
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-08-18T00:00:00.000Z
Reasoning: This intercept with 2.68% copper over 0.7m true width is an exceptional result and a bonanza intercept for a VMS deposit, indicating a very high-grade zone.
Positive factors
- Exceptional copper grade for VMS deposit type.
- True width disclosed.
- Bonanza Intercept
Evidence · table
“2.68”
Context: NUS-DD-26-06
Tags used in scoring
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: The intercept is part of the 'ongoing infill drilling program' aimed at increasing confidence in reserves.
Evidence · text
“ongoing infill drilling program”
Rejected tags
Rejected tags — excluded from scoring because their label or evidence could not be verified.
Bonanza InterceptRejected · positive
Exceptionally high-grade zone, well above the deposit-type norm.
Reason: The copper grade of 2.68% is well above the exceptional threshold of 2.5% for VMS copper deposits.
Evidence · table
“2.68”
Context: NUS-DD-26-06
True Width DisclosedRejected · positive
Actual thickness perpendicular to structure is stated, not just downhole length.
Reason: The table explicitly states 'True Thickness m' for the intercept.
Evidence · table
“0.7”
Context: NUS-DD-26-06
NUS-DD-26-08Nussir · copperGrade: 1.53Grade Unit: %Intercept: 1.7 mView all detailsHide details
Identity
- Hole ID
- NUS-DD-26-08
- Project
- Nussir
- Commodity
- copper
- Region
- finnmark, norway
- Reported Region
- Finnmark, Norway
- Ticker
- MOON
Geometry
- Grade
- 1.53
- Grade Unit
- %
- Intercept
- 1.7 m
- True Width
- 1.1 m
- From
- 179.7 m
- To
- 181.4 m
Classification
- Deposit Type
- vms
- Program
- resource
- Sample Type
- drill
- Group ID
- NUS-DD-26-08:179.7-181.4
- Mining Method
- underground
Location
- Loc. Confidence
- low
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- blanks, duplicates, certified_reference_materials
Metal Equivalent
- Metal Eq. Grade
- 1.82
- Metal Eq. Unit
- % CuEq
- Assumptions Disclosed
- Yes
Compositing
- Cutoff Grade
- 0.3
- Cutoff Unit
- % Cu
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-08-18T00:00:00.000Z
Reasoning: This intercept shows a strong copper grade of 1.53% over 1.1m true width, which is a good result for a VMS deposit, confirming mineralization continuity.
Positive factors
- Strong copper grade for VMS deposit type.
- True width disclosed.
Evidence · table
“1.53”
Context: NUS-DD-26-08
Tags used in scoring
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: The intercept is part of the 'ongoing infill drilling program' aimed at increasing confidence in reserves.
Evidence · text
“ongoing infill drilling program”
Rejected tags
Rejected tags — excluded from scoring because their label or evidence could not be verified.
True Width DisclosedRejected · positive
Actual thickness perpendicular to structure is stated, not just downhole length.
Reason: The table explicitly states 'True Thickness m' for the intercept.
Evidence · table
“1.1”
Context: NUS-DD-26-08
NUS-DD-26-08Nussir · copperGrade: 1.97Grade Unit: %View all detailsHide details
Identity
- Hole ID
- NUS-DD-26-08
- Project
- Nussir
- Commodity
- copper
- Region
- finnmark, norway
- Reported Region
- Finnmark, Norway
- Ticker
- MOON
Geometry
- Grade
- 1.97
- Grade Unit
- %
- True Width
- 0.5 m
Classification
- Deposit Type
- vms
- Program
- resource
- Sample Type
- drill
- Mining Method
- underground
Location
- Loc. Confidence
- low
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- blanks, duplicates, certified_reference_materials
Metal Equivalent
- Metal Eq. Grade
- 2.3
- Metal Eq. Unit
- % CuEq
- Assumptions Disclosed
- Yes
Compositing
- Cutoff Grade
- 0.3
- Cutoff Unit
- % Cu
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-08-18T00:00:00.000Z
Reasoning: This sub-interval shows a strong copper grade of 1.97% over 0.5m true width, indicating a higher-grade zone within the broader intercept.
Positive factors
- Strong copper grade for VMS deposit type.
- True width disclosed.
Evidence · table
“1.97”
Context: Including
Tags used in scoring
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: The intercept is part of the 'ongoing infill drilling program' aimed at increasing confidence in reserves.
Evidence · text
“ongoing infill drilling program”
Rejected tags
Rejected tags — excluded from scoring because their label or evidence could not be verified.
True Width DisclosedRejected · positive
Actual thickness perpendicular to structure is stated, not just downhole length.
Reason: The table explicitly states 'True Thickness m' for the intercept.
Evidence · table
“0.5”
Context: Including
NUS-DD-26-08Nussir · platinumGrade: 0.69Grade Unit: g/tIntercept: 0.6 mView all detailsHide details
Identity
- Hole ID
- NUS-DD-26-08
- Project
- Nussir
- Commodity
- platinum
- Region
- finnmark, norway
- Reported Region
- Finnmark, Norway
- Ticker
- MOON
Geometry
- Grade
- 0.69
- Grade Unit
- g/t
- Intercept
- 0.6 m
Classification
- Deposit Type
- vms
- Program
- resource
- Sample Type
- drill
- Mining Method
- underground
Location
- Loc. Confidence
- low
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- blanks, duplicates, certified_reference_materials
Metal Equivalent
- Assumptions Disclosed
- Yes
Compositing
- Cutoff Grade
- 0.3
- Cutoff Unit
- % Cu
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-08-18T00:00:00.000Z
Reasoning: The intersection of platinum, while not the primary focus, adds potential byproduct value and provides additional insight into the mineralization, building on previous showings.
Positive factors
- Presence of platinum provides additional insight and potential byproduct credit.
Evidence · text
“NUS-DD-26-08 intersected 0.6 m at 0.69 g/t Pt and 0.42 g/t Pd.”
Tags used in scoring
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: The intercept is part of the 'ongoing infill drilling program' aimed at increasing confidence in reserves.
Evidence · text
“ongoing infill drilling program”
Rejected tags
Rejected tags — excluded from scoring because their label or evidence could not be verified.
Byproduct CommodityRejected · neutral · Story-specific tag
The tested commodity is a byproduct rather than the primary economic driver.
Reason: Platinum is mentioned as an additional insight to previous showings, indicating it is not the primary commodity but a valuable byproduct.
Evidence · text
“In addition to the grades listed below, NUS-DD-26-08 intersected 0.6 m at 0.69 g/t Pt and 0.42 g/t Pd. This provides additional insight to previous showings of palladium and platinum previously encountered in hole NUS-DD-14-001.”
NUS-DD-26-08Nussir · palladiumGrade: 0.42Grade Unit: g/tIntercept: 0.6 mView all detailsHide details
Identity
- Hole ID
- NUS-DD-26-08
- Project
- Nussir
- Commodity
- palladium
- Region
- finnmark, norway
- Reported Region
- Finnmark, Norway
- Ticker
- MOON
Geometry
- Grade
- 0.42
- Grade Unit
- g/t
- Intercept
- 0.6 m
Classification
- Deposit Type
- vms
- Program
- resource
- Sample Type
- drill
- Mining Method
- underground
Location
- Loc. Confidence
- low
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- blanks, duplicates, certified_reference_materials
Metal Equivalent
- Assumptions Disclosed
- Yes
Compositing
- Cutoff Grade
- 0.3
- Cutoff Unit
- % Cu
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-08-18T00:00:00.000Z
Reasoning: The intersection of palladium, while not the primary focus, adds potential byproduct value and provides additional insight into the mineralization, building on previous showings.
Positive factors
- Presence of palladium provides additional insight and potential byproduct credit.
Evidence · text
“NUS-DD-26-08 intersected 0.6 m at 0.69 g/t Pt and 0.42 g/t Pd.”
Tags used in scoring
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: The intercept is part of the 'ongoing infill drilling program' aimed at increasing confidence in reserves.
Evidence · text
“ongoing infill drilling program”
Rejected tags
Rejected tags — excluded from scoring because their label or evidence could not be verified.
Byproduct CommodityRejected · neutral · Story-specific tag
The tested commodity is a byproduct rather than the primary economic driver.
Reason: Palladium is mentioned as an additional insight to previous showings, indicating it is not the primary commodity but a valuable byproduct.
Evidence · text
“In addition to the grades listed below, NUS-DD-26-08 intersected 0.6 m at 0.69 g/t Pt and 0.42 g/t Pd. This provides additional insight to previous showings of palladium and platinum previously encountered in hole NUS-DD-14-001.”
NUS-DD-26-09Nussir · copperGrade: 0.32Grade Unit: %Intercept: 1 mView all detailsHide details
Identity
- Hole ID
- NUS-DD-26-09
- Project
- Nussir
- Commodity
- copper
- Region
- finnmark, norway
- Reported Region
- Finnmark, Norway
- Ticker
- MOON
Geometry
- Grade
- 0.32
- Grade Unit
- %
- Intercept
- 1 m
- True Width
- 0.8 m
- From
- 118.4 m
- To
- 119.4 m
Classification
- Deposit Type
- vms
- Program
- resource
- Sample Type
- drill
- Group ID
- NUS-DD-26-09:118.4-119.4
- Mining Method
- underground
Location
- Loc. Confidence
- low
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- blanks, duplicates, certified_reference_materials
Metal Equivalent
- Metal Eq. Grade
- 0.38
- Metal Eq. Unit
- % CuEq
- Assumptions Disclosed
- Yes
Compositing
- Cutoff Grade
- 0.3
- Cutoff Unit
- % Cu
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-08-18T00:00:00.000Z
Reasoning: This intercept shows a weak copper grade of 0.32% over 0.8m true width, which is just above the cut-off grade and indicates marginal mineralization.
Positive factors
- True width disclosed.
Evidence · table
“0.32”
Context: NUS-DD-26-09
Tags used in scoring
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: The intercept is part of the 'ongoing infill drilling program' aimed at increasing confidence in reserves.
Evidence · text
“ongoing infill drilling program”
Rejected tags
Rejected tags — excluded from scoring because their label or evidence could not be verified.
True Width DisclosedRejected · positive
Actual thickness perpendicular to structure is stated, not just downhole length.
Reason: The table explicitly states 'True Thickness m' for the intercept.
Evidence · table
“0.8”
Context: NUS-DD-26-09
NUS-DD-26-10Nussir · copperGrade: 1.13Grade Unit: %Intercept: 3.5 mView all detailsHide details
Identity
- Hole ID
- NUS-DD-26-10
- Project
- Nussir
- Commodity
- copper
- Region
- finnmark, norway
- Reported Region
- Finnmark, Norway
- Ticker
- MOON
Geometry
- Grade
- 1.13
- Grade Unit
- %
- Intercept
- 3.5 m
- True Width
- 1.9 m
- From
- 224.3 m
- To
- 227.8 m
Classification
- Deposit Type
- vms
- Program
- resource
- Sample Type
- drill
- Group ID
- NUS-DD-26-10:224.3-227.8
- Mining Method
- underground
Location
- Loc. Confidence
- low
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- blanks, duplicates, certified_reference_materials
Metal Equivalent
- Metal Eq. Grade
- 1.37
- Metal Eq. Unit
- % CuEq
- Assumptions Disclosed
- Yes
Compositing
- Cutoff Grade
- 0.3
- Cutoff Unit
- % Cu
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-08-18T00:00:00.000Z
Reasoning: This intercept shows a strong copper grade of 1.13% over 1.9m true width, which is a good result for a VMS deposit, confirming mineralization continuity.
Positive factors
- Strong copper grade for VMS deposit type.
- True width disclosed.
Evidence · table
“1.13”
Context: NUS-DD-26-10
Tags used in scoring
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: The intercept is part of the 'ongoing infill drilling program' aimed at increasing confidence in reserves.
Evidence · text
“ongoing infill drilling program”
Rejected tags
Rejected tags — excluded from scoring because their label or evidence could not be verified.
True Width DisclosedRejected · positive
Actual thickness perpendicular to structure is stated, not just downhole length.
Reason: The table explicitly states 'True Thickness m' for the intercept.
Evidence · table
“1.9”
Context: NUS-DD-26-10
NUS-DD-26-10Nussir · copperGrade: 2.4Grade Unit: %View all detailsHide details
Identity
- Hole ID
- NUS-DD-26-10
- Project
- Nussir
- Commodity
- copper
- Region
- finnmark, norway
- Reported Region
- Finnmark, Norway
- Ticker
- MOON
Geometry
- Grade
- 2.4
- Grade Unit
- %
- True Width
- 0.5 m
Classification
- Deposit Type
- vms
- Program
- resource
- Sample Type
- drill
- Mining Method
- underground
Location
- Loc. Confidence
- low
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- blanks, duplicates, certified_reference_materials
Metal Equivalent
- Metal Eq. Grade
- 2.95
- Metal Eq. Unit
- % CuEq
- Assumptions Disclosed
- Yes
Compositing
- Cutoff Grade
- 0.3
- Cutoff Unit
- % Cu
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-08-18T00:00:00.000Z
Reasoning: This sub-interval shows a strong copper grade of 2.40% over 0.5m true width, indicating a higher-grade zone within the broader intercept, approaching exceptional levels for a VMS deposit.
Positive factors
- Strong copper grade for VMS deposit type.
- True width disclosed.
Evidence · table
“2.40”
Context: Including
Tags used in scoring
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: The intercept is part of the 'ongoing infill drilling program' aimed at increasing confidence in reserves.
Evidence · text
“ongoing infill drilling program”
Rejected tags
Rejected tags — excluded from scoring because their label or evidence could not be verified.
True Width DisclosedRejected · positive
Actual thickness perpendicular to structure is stated, not just downhole length.
Reason: The table explicitly states 'True Thickness m' for the intercept.
Evidence · table
“0.5”
Context: Including
NUS-DD-26-13Nussir · copperGrade: 1.47Grade Unit: %Intercept: 2 mView all detailsHide details
Identity
- Hole ID
- NUS-DD-26-13
- Project
- Nussir
- Commodity
- copper
- Region
- finnmark, norway
- Reported Region
- Finnmark, Norway
- Ticker
- MOON
Geometry
- Grade
- 1.47
- Grade Unit
- %
- Intercept
- 2 m
- True Width
- 1.7 m
- From
- 123 m
- To
- 125 m
Classification
- Deposit Type
- vms
- Program
- resource
- Sample Type
- drill
- Group ID
- NUS-DD-26-13:123-125
- Mining Method
- underground
Location
- Loc. Confidence
- low
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- blanks, duplicates, certified_reference_materials
Metal Equivalent
- Metal Eq. Grade
- 1.74
- Metal Eq. Unit
- % CuEq
- Assumptions Disclosed
- Yes
Compositing
- Cutoff Grade
- 0.3
- Cutoff Unit
- % Cu
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-08-18T00:00:00.000Z
Reasoning: This intercept shows a strong copper grade of 1.47% over 1.7m true width, which is a good result for a VMS deposit, confirming mineralization continuity.
Positive factors
- Strong copper grade for VMS deposit type.
- True width disclosed.
Evidence · table
“1.47”
Context: NUS-DD-26-13
Tags used in scoring
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: The intercept is part of the 'ongoing infill drilling program' aimed at increasing confidence in reserves.
Evidence · text
“ongoing infill drilling program”
Rejected tags
Rejected tags — excluded from scoring because their label or evidence could not be verified.
True Width DisclosedRejected · positive
Actual thickness perpendicular to structure is stated, not just downhole length.
Reason: The table explicitly states 'True Thickness m' for the intercept.
Evidence · table
“1.7”
Context: NUS-DD-26-13
NUS-DD-26-13Nussir · copperGrade: 2.28Grade Unit: %View all detailsHide details
Identity
- Hole ID
- NUS-DD-26-13
- Project
- Nussir
- Commodity
- copper
- Region
- finnmark, norway
- Reported Region
- Finnmark, Norway
- Ticker
- MOON
Geometry
- Grade
- 2.28
- Grade Unit
- %
- True Width
- 0.8 m
Classification
- Deposit Type
- vms
- Program
- resource
- Sample Type
- drill
- Mining Method
- underground
Location
- Loc. Confidence
- low
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- blanks, duplicates, certified_reference_materials
Metal Equivalent
- Metal Eq. Grade
- 2.7
- Metal Eq. Unit
- % CuEq
- Assumptions Disclosed
- Yes
Compositing
- Cutoff Grade
- 0.3
- Cutoff Unit
- % Cu
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-08-18T00:00:00.000Z
Reasoning: This sub-interval with 2.28% copper over 0.8m true width is an exceptional result and a bonanza intercept for a VMS deposit, indicating a very high-grade zone.
Positive factors
- Exceptional copper grade for VMS deposit type.
- True width disclosed.
- Bonanza Intercept
Evidence · table
“2.28”
Context: Including
Tags used in scoring
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: The intercept is part of the 'ongoing infill drilling program' aimed at increasing confidence in reserves.
Evidence · text
“ongoing infill drilling program”
Rejected tags
Rejected tags — excluded from scoring because their label or evidence could not be verified.
Bonanza InterceptRejected · positive
Exceptionally high-grade zone, well above the deposit-type norm.
Reason: The copper grade of 2.28% is well above the strong threshold of 1% for VMS copper deposits, and close to the exceptional threshold of 2.5%.
Evidence · table
“2.28”
Context: Including
True Width DisclosedRejected · positive
Actual thickness perpendicular to structure is stated, not just downhole length.
Reason: The table explicitly states 'True Thickness m' for the intercept.
Evidence · table
“0.8”
Context: Including
NUS-DD-26-07Nussir · copperGrade: 1.39Grade Unit: %Intercept: 5.5 mView all detailsHide details
Identity
- Hole ID
- NUS-DD-26-07
- Project
- Nussir
- Commodity
- copper
- Region
- finnmark, norway
- Reported Region
- Finnmark, Norway
- Ticker
- MOON
Geometry
- Grade
- 1.39
- Grade Unit
- %
- Intercept
- 5.5 m
- True Width
- 3.7 m
- From
- 917.4 m
- To
- 922.9 m
Classification
- Deposit Type
- vms
- Program
- exploration
- Sample Type
- drill
- Mining Method
- underground
Location
- Loc. Confidence
- low
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- blanks, duplicates, certified_reference_materials
Metal Equivalent
- Metal Eq. Grade
- 1.56
- Metal Eq. Unit
- % CuEq
- Assumptions Disclosed
- Yes
Compositing
- Cutoff Grade
- 0.3
- Cutoff Unit
- % Cu
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-08-18T00:00:00.000Z
Reasoning: This deep exploration intercept shows a strong copper grade of 1.39% over 3.7m true width, extending the high-grade mineralization at depth and indicating potential for further resource growth.
Positive factors
- Strong copper grade for VMS deposit type.
- True width disclosed.
- Step-Out Extension
Evidence · table
“1.39”
Context: NUS-DD-26-07
Rejected tags
Rejected tags — excluded from scoring because their label or evidence could not be verified.
True Width DisclosedRejected · positive
Actual thickness perpendicular to structure is stated, not just downhole length.
Reason: The table explicitly states 'True Thickness m' for the intercept.
Evidence · table
“3.7”
Context: NUS-DD-26-07
Step-Out ExtensionRejected · positive
Mineralization extended beyond the previously known limit.
Reason: The intercept is from the 'deep exploration program' and is described as 'expanding the high-grade, deep mineralization'.
Evidence · text
“Blue Moon continues to expand the high-grade, deep mineralization in the western limb of the Nussir project”
NUS-DD-26-07Nussir · copperGrade: 2.3Grade Unit: %View all detailsHide details
Identity
- Hole ID
- NUS-DD-26-07
- Project
- Nussir
- Commodity
- copper
- Region
- finnmark, norway
- Reported Region
- Finnmark, Norway
- Ticker
- MOON
Geometry
- Grade
- 2.3
- Grade Unit
- %
- True Width
- 0.6 m
Classification
- Deposit Type
- vms
- Program
- exploration
- Sample Type
- drill
- Mining Method
- underground
Location
- Loc. Confidence
- low
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- blanks, duplicates, certified_reference_materials
Metal Equivalent
- Metal Eq. Grade
- 2.45
- Metal Eq. Unit
- % CuEq
- Assumptions Disclosed
- Yes
Compositing
- Cutoff Grade
- 0.3
- Cutoff Unit
- % Cu
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-08-18T00:00:00.000Z
Reasoning: This sub-interval with 2.30% copper over 0.6m true width is an exceptional result for a VMS deposit, indicating a very high-grade zone within the deep exploration target.
Positive factors
- Exceptional copper grade for VMS deposit type.
- True width disclosed.
- Step-Out Extension
Evidence · table
“2.30”
Context: Including
Rejected tags
Rejected tags — excluded from scoring because their label or evidence could not be verified.
Bonanza InterceptRejected · positive
Exceptionally high-grade zone, well above the deposit-type norm.
Reason: The copper grade of 2.30% is well above the strong threshold of 1% for VMS copper deposits, and close to the exceptional threshold of 2.5%.
Evidence · table
“2.30”
Context: Including
True Width DisclosedRejected · positive
Actual thickness perpendicular to structure is stated, not just downhole length.
Reason: The table explicitly states 'True Thickness m' for the intercept.
Evidence · table
“0.6”
Context: Including
Step-Out ExtensionRejected · positive
Mineralization extended beyond the previously known limit.
Reason: The intercept is from the 'deep exploration program' and is described as 'expanding the high-grade, deep mineralization'.
Evidence · text
“Blue Moon continues to expand the high-grade, deep mineralization in the western limb of the Nussir project”
GT-DD-26-05Nussir · goldGrade: 0.18Grade Unit: g/tIntercept: 2 mView all detailsHide details
Identity
- Hole ID
- GT-DD-26-05
- Project
- Nussir
- Commodity
- gold
- Region
- finnmark, norway
- Reported Region
- Finnmark, Norway
- Ticker
- MOON
Geometry
- Grade
- 0.18
- Grade Unit
- g/t
- Intercept
- 2 m
- True Width
- 1.4 m
- From
- 179 m
- To
- 181 m
Classification
- Deposit Type
- vms
- Sample Type
- drill
- Group ID
- GT-DD-26-05:179-181
- Mining Method
- underground
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-08-18T00:00:00.000Z
Reasoning: Expanded from assay table. 0.18 g/t gold is below against the underground mining band [15, 7, 4, 2.5] g/t. Grade×width 0.4 g/t·m is below.
Negative factors
- 0.18 g/t gold is below the weak threshold (2.5 g/t) on the underground mining band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.18”
Context: GT-DD-26-05
GT-DD-26-05Nussir · silverGrade: 13.4Grade Unit: g/tIntercept: 2 mView all detailsHide details
Identity
- Hole ID
- GT-DD-26-05
- Project
- Nussir
- Commodity
- silver
- Region
- finnmark, norway
- Reported Region
- Finnmark, Norway
- Ticker
- MOON
Geometry
- Grade
- 13.4
- Grade Unit
- g/t
- Intercept
- 2 m
- True Width
- 1.4 m
- From
- 179 m
- To
- 181 m
Classification
- Deposit Type
- vms
- Sample Type
- drill
- Group ID
- GT-DD-26-05:179-181
- Mining Method
- underground
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-08-18T00:00:00.000Z
Reasoning: Expanded from assay table. 13.4 g/t silver is below against the default band [500, 200, 100, 30] g/t. Grade×width 26.8 g/t·m is below.
Negative factors
- 13.4 g/t silver is below the weak threshold (30 g/t) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“13.4”
Context: GT-DD-26-05
NUS-DD-26-01Nussir · goldGrade: 0.11Grade Unit: g/tIntercept: 1.7 mView all detailsHide details
Identity
- Hole ID
- NUS-DD-26-01
- Project
- Nussir
- Commodity
- gold
- Region
- finnmark, norway
- Reported Region
- Finnmark, Norway
- Ticker
- MOON
Geometry
- Grade
- 0.11
- Grade Unit
- g/t
- Intercept
- 1.7 m
- True Width
- 1.5 m
- From
- 122.6 m
- To
- 124.3 m
Classification
- Deposit Type
- vms
- Sample Type
- drill
- Group ID
- NUS-DD-26-01:122.6-124.3
- Mining Method
- underground
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-08-18T00:00:00.000Z
Reasoning: Expanded from assay table. 0.11 g/t gold is below against the underground mining band [15, 7, 4, 2.5] g/t. Grade×width 0.2 g/t·m is below.
Negative factors
- 0.11 g/t gold is below the weak threshold (2.5 g/t) on the underground mining band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.11”
Context: NUS-DD-26-01
NUS-DD-26-01Nussir · silverGrade: 19.8Grade Unit: g/tIntercept: 1.7 mView all detailsHide details
Identity
- Hole ID
- NUS-DD-26-01
- Project
- Nussir
- Commodity
- silver
- Region
- finnmark, norway
- Reported Region
- Finnmark, Norway
- Ticker
- MOON
Geometry
- Grade
- 19.8
- Grade Unit
- g/t
- Intercept
- 1.7 m
- True Width
- 1.5 m
- From
- 122.6 m
- To
- 124.3 m
Classification
- Deposit Type
- vms
- Sample Type
- drill
- Group ID
- NUS-DD-26-01:122.6-124.3
- Mining Method
- underground
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-08-18T00:00:00.000Z
Reasoning: Expanded from assay table. 19.8 g/t silver is below against the default band [500, 200, 100, 30] g/t. Grade×width 33.7 g/t·m is below.
Negative factors
- 19.8 g/t silver is below the weak threshold (30 g/t) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“19.8”
Context: NUS-DD-26-01
NUS-DD-26-02Nussir · goldGrade: 0.15Grade Unit: g/tIntercept: 1.7 mView all detailsHide details
Identity
- Hole ID
- NUS-DD-26-02
- Project
- Nussir
- Commodity
- gold
- Region
- finnmark, norway
- Reported Region
- Finnmark, Norway
- Ticker
- MOON
Geometry
- Grade
- 0.15
- Grade Unit
- g/t
- Intercept
- 1.7 m
- True Width
- 1.6 m
- From
- 122.3 m
- To
- 124 m
Classification
- Deposit Type
- vms
- Sample Type
- drill
- Group ID
- NUS-DD-26-02:122.3-124
- Mining Method
- underground
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-08-18T00:00:00.000Z
Reasoning: Expanded from assay table. 0.15 g/t gold is below against the underground mining band [15, 7, 4, 2.5] g/t. Grade×width 0.3 g/t·m is below.
Negative factors
- 0.15 g/t gold is below the weak threshold (2.5 g/t) on the underground mining band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.15”
Context: NUS-DD-26-02
NUS-DD-26-02Nussir · silverGrade: 20.2Grade Unit: g/tIntercept: 1.7 mView all detailsHide details
Identity
- Hole ID
- NUS-DD-26-02
- Project
- Nussir
- Commodity
- silver
- Region
- finnmark, norway
- Reported Region
- Finnmark, Norway
- Ticker
- MOON
Geometry
- Grade
- 20.2
- Grade Unit
- g/t
- Intercept
- 1.7 m
- True Width
- 1.6 m
- From
- 122.3 m
- To
- 124 m
Classification
- Deposit Type
- vms
- Sample Type
- drill
- Group ID
- NUS-DD-26-02:122.3-124
- Mining Method
- underground
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-08-18T00:00:00.000Z
Reasoning: Expanded from assay table. 20.2 g/t silver is below against the default band [500, 200, 100, 30] g/t. Grade×width 34.3 g/t·m is below.
Negative factors
- 20.2 g/t silver is below the weak threshold (30 g/t) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“20.2”
Context: NUS-DD-26-02
NUS-DD-26-03Nussir · goldGrade: 0.07Grade Unit: g/tIntercept: 3.1 mView all detailsHide details
Identity
- Hole ID
- NUS-DD-26-03
- Project
- Nussir
- Commodity
- gold
- Region
- finnmark, norway
- Reported Region
- Finnmark, Norway
- Ticker
- MOON
Geometry
- Grade
- 0.07
- Grade Unit
- g/t
- Intercept
- 3.1 m
- True Width
- 3 m
- From
- 124.4 m
- To
- 127.5 m
Classification
- Deposit Type
- vms
- Sample Type
- drill
- Group ID
- NUS-DD-26-03:124.4-127.5
- Mining Method
- underground
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-08-18T00:00:00.000Z
Reasoning: Expanded from assay table. 0.07 g/t gold is below against the underground mining band [15, 7, 4, 2.5] g/t. Grade×width 0.2 g/t·m is below.
Negative factors
- 0.07 g/t gold is below the weak threshold (2.5 g/t) on the underground mining band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.07”
Context: NUS-DD-26-03
NUS-DD-26-03Nussir · silverGrade: 11.4Grade Unit: g/tIntercept: 3.1 mView all detailsHide details
Identity
- Hole ID
- NUS-DD-26-03
- Project
- Nussir
- Commodity
- silver
- Region
- finnmark, norway
- Reported Region
- Finnmark, Norway
- Ticker
- MOON
Geometry
- Grade
- 11.4
- Grade Unit
- g/t
- Intercept
- 3.1 m
- True Width
- 3 m
- From
- 124.4 m
- To
- 127.5 m
Classification
- Deposit Type
- vms
- Sample Type
- drill
- Group ID
- NUS-DD-26-03:124.4-127.5
- Mining Method
- underground
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-08-18T00:00:00.000Z
Reasoning: Expanded from assay table. 11.4 g/t silver is below against the default band [500, 200, 100, 30] g/t. Grade×width 35.3 g/t·m is below.
Negative factors
- 11.4 g/t silver is below the weak threshold (30 g/t) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“11.4”
Context: NUS-DD-26-03
NUS-DD-26-04Nussir · goldGrade: 0.08Grade Unit: g/tIntercept: 3.9 mView all detailsHide details
Identity
- Hole ID
- NUS-DD-26-04
- Project
- Nussir
- Commodity
- gold
- Region
- finnmark, norway
- Reported Region
- Finnmark, Norway
- Ticker
- MOON
Geometry
- Grade
- 0.08
- Grade Unit
- g/t
- Intercept
- 3.9 m
- True Width
- 3.2 m
- From
- 135.7 m
- To
- 139.6 m
Classification
- Deposit Type
- vms
- Sample Type
- drill
- Group ID
- NUS-DD-26-04:135.7-139.6
- Mining Method
- underground
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-08-18T00:00:00.000Z
Reasoning: Expanded from assay table. 0.08 g/t gold is below against the underground mining band [15, 7, 4, 2.5] g/t. Grade×width 0.3 g/t·m is below.
Negative factors
- 0.08 g/t gold is below the weak threshold (2.5 g/t) on the underground mining band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.08”
Context: NUS-DD-26-04
NUS-DD-26-04Nussir · silverGrade: 11.9Grade Unit: g/tIntercept: 3.9 mView all detailsHide details
Identity
- Hole ID
- NUS-DD-26-04
- Project
- Nussir
- Commodity
- silver
- Region
- finnmark, norway
- Reported Region
- Finnmark, Norway
- Ticker
- MOON
Geometry
- Grade
- 11.9
- Grade Unit
- g/t
- Intercept
- 3.9 m
- True Width
- 3.2 m
- From
- 135.7 m
- To
- 139.6 m
Classification
- Deposit Type
- vms
- Sample Type
- drill
- Group ID
- NUS-DD-26-04:135.7-139.6
- Mining Method
- underground
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-08-18T00:00:00.000Z
Reasoning: Expanded from assay table. 11.9 g/t silver is below against the default band [500, 200, 100, 30] g/t. Grade×width 46.4 g/t·m is below.
Negative factors
- 11.9 g/t silver is below the weak threshold (30 g/t) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“11.9”
Context: NUS-DD-26-04
NUS-DD-26-05Nussir · goldGrade: 0.004Grade Unit: g/tIntercept: 1 mView all detailsHide details
Identity
- Hole ID
- NUS-DD-26-05
- Project
- Nussir
- Commodity
- gold
- Region
- finnmark, norway
- Reported Region
- Finnmark, Norway
- Ticker
- MOON
Geometry
- Grade
- 0.004
- Grade Unit
- g/t
- Intercept
- 1 m
- True Width
- 0.9 m
- From
- 216.9 m
- To
- 217.9 m
Classification
- Deposit Type
- vms
- Sample Type
- drill
- Group ID
- NUS-DD-26-05:216.9-217.9
- Mining Method
- underground
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-08-18T00:00:00.000Z
Reasoning: Expanded from assay table. 0.004 g/t gold is below against the underground mining band [15, 7, 4, 2.5] g/t. Grade×width 0.0 g/t·m is below.
Negative factors
- 0.004 g/t gold is below the weak threshold (2.5 g/t) on the underground mining band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.004”
Context: NUS-DD-26-05
NUS-DD-26-05Nussir · silverGrade: 6.9Grade Unit: g/tIntercept: 1 mView all detailsHide details
Identity
- Hole ID
- NUS-DD-26-05
- Project
- Nussir
- Commodity
- silver
- Region
- finnmark, norway
- Reported Region
- Finnmark, Norway
- Ticker
- MOON
Geometry
- Grade
- 6.9
- Grade Unit
- g/t
- Intercept
- 1 m
- True Width
- 0.9 m
- From
- 216.9 m
- To
- 217.9 m
Classification
- Deposit Type
- vms
- Sample Type
- drill
- Group ID
- NUS-DD-26-05:216.9-217.9
- Mining Method
- underground
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-08-18T00:00:00.000Z
Reasoning: Expanded from assay table. 6.9 g/t silver is below against the default band [500, 200, 100, 30] g/t. Grade×width 6.9 g/t·m is below.
Negative factors
- 6.9 g/t silver is below the weak threshold (30 g/t) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“6.9”
Context: NUS-DD-26-05
NUS-DD-26-06Nussir · goldGrade: 0.14Grade Unit: g/tIntercept: 1 mView all detailsHide details
Identity
- Hole ID
- NUS-DD-26-06
- Project
- Nussir
- Commodity
- gold
- Region
- finnmark, norway
- Reported Region
- Finnmark, Norway
- Ticker
- MOON
Geometry
- Grade
- 0.14
- Grade Unit
- g/t
- Intercept
- 1 m
- True Width
- 0.7 m
- From
- 265 m
- To
- 266 m
Classification
- Deposit Type
- vms
- Sample Type
- drill
- Group ID
- NUS-DD-26-06:265-266
- Mining Method
- underground
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-08-18T00:00:00.000Z
Reasoning: Expanded from assay table. 0.14 g/t gold is below against the underground mining band [15, 7, 4, 2.5] g/t. Grade×width 0.1 g/t·m is below.
Negative factors
- 0.14 g/t gold is below the weak threshold (2.5 g/t) on the underground mining band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.14”
Context: NUS-DD-26-06
NUS-DD-26-06Nussir · silverGrade: 44.9Grade Unit: g/tIntercept: 1 mView all detailsHide details
Identity
- Hole ID
- NUS-DD-26-06
- Project
- Nussir
- Commodity
- silver
- Region
- finnmark, norway
- Reported Region
- Finnmark, Norway
- Ticker
- MOON
Geometry
- Grade
- 44.9
- Grade Unit
- g/t
- Intercept
- 1 m
- True Width
- 0.7 m
- From
- 265 m
- To
- 266 m
Classification
- Deposit Type
- vms
- Sample Type
- drill
- Group ID
- NUS-DD-26-06:265-266
- Mining Method
- underground
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-08-18T00:00:00.000Z
Reasoning: Expanded from assay table. 44.9 g/t silver is weak against the default band [500, 200, 100, 30] g/t. Grade×width 44.9 g/t·m is below (grade alone is weak; the better of the two is used).
Negative factors
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“44.9”
Context: NUS-DD-26-06
NUS-DD-26-08Nussir · goldGrade: 0.11Grade Unit: g/tIntercept: 1.7 mView all detailsHide details
Identity
- Hole ID
- NUS-DD-26-08
- Project
- Nussir
- Commodity
- gold
- Region
- finnmark, norway
- Reported Region
- Finnmark, Norway
- Ticker
- MOON
Geometry
- Grade
- 0.11
- Grade Unit
- g/t
- Intercept
- 1.7 m
- True Width
- 1.1 m
- From
- 179.7 m
- To
- 181.4 m
Classification
- Deposit Type
- vms
- Sample Type
- drill
- Group ID
- NUS-DD-26-08:179.7-181.4
- Mining Method
- underground
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-08-18T00:00:00.000Z
Reasoning: Expanded from assay table. 0.11 g/t gold is below against the underground mining band [15, 7, 4, 2.5] g/t. Grade×width 0.2 g/t·m is below.
Negative factors
- 0.11 g/t gold is below the weak threshold (2.5 g/t) on the underground mining band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.11”
Context: NUS-DD-26-08
NUS-DD-26-08Nussir · silverGrade: 27Grade Unit: g/tIntercept: 1.7 mView all detailsHide details
Identity
- Hole ID
- NUS-DD-26-08
- Project
- Nussir
- Commodity
- silver
- Region
- finnmark, norway
- Reported Region
- Finnmark, Norway
- Ticker
- MOON
Geometry
- Grade
- 27
- Grade Unit
- g/t
- Intercept
- 1.7 m
- True Width
- 1.1 m
- From
- 179.7 m
- To
- 181.4 m
Classification
- Deposit Type
- vms
- Sample Type
- drill
- Group ID
- NUS-DD-26-08:179.7-181.4
- Mining Method
- underground
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-08-18T00:00:00.000Z
Reasoning: Expanded from assay table. 27 g/t silver is below against the default band [500, 200, 100, 30] g/t. Grade×width 45.9 g/t·m is below.
Negative factors
- 27 g/t silver is below the weak threshold (30 g/t) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“27.0”
Context: NUS-DD-26-08
NUS-DD-26-09Nussir · goldGrade: 0.04Grade Unit: g/tIntercept: 1 mView all detailsHide details
Identity
- Hole ID
- NUS-DD-26-09
- Project
- Nussir
- Commodity
- gold
- Region
- finnmark, norway
- Reported Region
- Finnmark, Norway
- Ticker
- MOON
Geometry
- Grade
- 0.04
- Grade Unit
- g/t
- Intercept
- 1 m
- True Width
- 0.8 m
- From
- 118.4 m
- To
- 119.4 m
Classification
- Deposit Type
- vms
- Sample Type
- drill
- Group ID
- NUS-DD-26-09:118.4-119.4
- Mining Method
- underground
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-08-18T00:00:00.000Z
Reasoning: Expanded from assay table. 0.04 g/t gold is below against the underground mining band [15, 7, 4, 2.5] g/t. Grade×width 0.0 g/t·m is below.
Negative factors
- 0.04 g/t gold is below the weak threshold (2.5 g/t) on the underground mining band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.04”
Context: NUS-DD-26-09
NUS-DD-26-09Nussir · silverGrade: 4.3Grade Unit: g/tIntercept: 1 mView all detailsHide details
Identity
- Hole ID
- NUS-DD-26-09
- Project
- Nussir
- Commodity
- silver
- Region
- finnmark, norway
- Reported Region
- Finnmark, Norway
- Ticker
- MOON
Geometry
- Grade
- 4.3
- Grade Unit
- g/t
- Intercept
- 1 m
- True Width
- 0.8 m
- From
- 118.4 m
- To
- 119.4 m
Classification
- Deposit Type
- vms
- Sample Type
- drill
- Group ID
- NUS-DD-26-09:118.4-119.4
- Mining Method
- underground
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-08-18T00:00:00.000Z
Reasoning: Expanded from assay table. 4.3 g/t silver is below against the default band [500, 200, 100, 30] g/t. Grade×width 4.3 g/t·m is below.
Negative factors
- 4.3 g/t silver is below the weak threshold (30 g/t) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“4.3”
Context: NUS-DD-26-09
NUS-DD-26-10Nussir · goldGrade: 0.12Grade Unit: g/tIntercept: 3.5 mView all detailsHide details
Identity
- Hole ID
- NUS-DD-26-10
- Project
- Nussir
- Commodity
- gold
- Region
- finnmark, norway
- Reported Region
- Finnmark, Norway
- Ticker
- MOON
Geometry
- Grade
- 0.12
- Grade Unit
- g/t
- Intercept
- 3.5 m
- True Width
- 1.9 m
- From
- 224.3 m
- To
- 227.8 m
Classification
- Deposit Type
- vms
- Sample Type
- drill
- Group ID
- NUS-DD-26-10:224.3-227.8
- Mining Method
- underground
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-08-18T00:00:00.000Z
Reasoning: Expanded from assay table. 0.12 g/t gold is below against the underground mining band [15, 7, 4, 2.5] g/t. Grade×width 0.4 g/t·m is below.
Negative factors
- 0.12 g/t gold is below the weak threshold (2.5 g/t) on the underground mining band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.12”
Context: NUS-DD-26-10
NUS-DD-26-10Nussir · silverGrade: 20.3Grade Unit: g/tIntercept: 3.5 mView all detailsHide details
Identity
- Hole ID
- NUS-DD-26-10
- Project
- Nussir
- Commodity
- silver
- Region
- finnmark, norway
- Reported Region
- Finnmark, Norway
- Ticker
- MOON
Geometry
- Grade
- 20.3
- Grade Unit
- g/t
- Intercept
- 3.5 m
- True Width
- 1.9 m
- From
- 224.3 m
- To
- 227.8 m
Classification
- Deposit Type
- vms
- Sample Type
- drill
- Group ID
- NUS-DD-26-10:224.3-227.8
- Mining Method
- underground
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-08-18T00:00:00.000Z
Reasoning: Expanded from assay table. 20.3 g/t silver is below against the default band [500, 200, 100, 30] g/t. Grade×width 71.0 g/t·m is below.
Negative factors
- 20.3 g/t silver is below the weak threshold (30 g/t) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“20.3”
Context: NUS-DD-26-10
NUS-DD-26-13Nussir · goldGrade: 0.09Grade Unit: g/tIntercept: 2 mView all detailsHide details
Identity
- Hole ID
- NUS-DD-26-13
- Project
- Nussir
- Commodity
- gold
- Region
- finnmark, norway
- Reported Region
- Finnmark, Norway
- Ticker
- MOON
Geometry
- Grade
- 0.09
- Grade Unit
- g/t
- Intercept
- 2 m
- True Width
- 1.7 m
- From
- 123 m
- To
- 125 m
Classification
- Deposit Type
- vms
- Sample Type
- drill
- Group ID
- NUS-DD-26-13:123-125
- Mining Method
- underground
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-08-18T00:00:00.000Z
Reasoning: Expanded from assay table. 0.09 g/t gold is below against the underground mining band [15, 7, 4, 2.5] g/t. Grade×width 0.2 g/t·m is below.
Negative factors
- 0.09 g/t gold is below the weak threshold (2.5 g/t) on the underground mining band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.09”
Context: NUS-DD-26-13
NUS-DD-26-13Nussir · silverGrade: 25.1Grade Unit: g/tIntercept: 2 mView all detailsHide details
Identity
- Hole ID
- NUS-DD-26-13
- Project
- Nussir
- Commodity
- silver
- Region
- finnmark, norway
- Reported Region
- Finnmark, Norway
- Ticker
- MOON
Geometry
- Grade
- 25.1
- Grade Unit
- g/t
- Intercept
- 2 m
- True Width
- 1.7 m
- From
- 123 m
- To
- 125 m
Classification
- Deposit Type
- vms
- Sample Type
- drill
- Group ID
- NUS-DD-26-13:123-125
- Mining Method
- underground
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-08-18T00:00:00.000Z
Reasoning: Expanded from assay table. 25.1 g/t silver is below against the default band [500, 200, 100, 30] g/t. Grade×width 50.2 g/t·m is below.
Negative factors
- 25.1 g/t silver is below the weak threshold (30 g/t) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“25.1”
Context: NUS-DD-26-13
How Atlas produces this analysis
Minestarters Atlas uses automated extraction to summarize mining announcements, identify reported measurements, and classify supporting evidence. Sentiment reflects the extracted narrative and classification rules; it is an interpretation, not a reported measurement. Evidence quotes and context are provided where available. Missing data, low-confidence results, and review flags indicate limitations. Check the original publisher announcement before relying on an interpretation.